MCU driver/HAL for the Picocell Gateway concentrator board. The firmware implements either a USB CDC protocol or a UART protocol to bridge commands coming from host to the SX1308 SPI interface.
Revision 0:c76361bd82e8, committed 2018-04-11
- Comitter:
- dgabino
- Date:
- Wed Apr 11 14:42:47 2018 +0000
- Commit message:
- Initial commit
Changed in this revision
diff -r 000000000000 -r c76361bd82e8 VERSION --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/VERSION Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,1 @@ +0.2.1
diff -r 000000000000 -r c76361bd82e8 bin/pgw_fw_uart.hex --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/bin/pgw_fw_uart.hex Wed Apr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
diff -r 000000000000 -r c76361bd82e8 bin/pgw_fw_usb.dfu Binary file bin/pgw_fw_usb.dfu has changed
diff -r 000000000000 -r c76361bd82e8 bin/pgw_fw_usb.hex --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/bin/pgw_fw_usb.hex Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,3194 @@ +:020000040800F2 +:1000000000800120210300088747000849470008B5 +:1000100085470008452C0008EF610008000000003B +:1000200000000000000000000000000097470008EA +:100030008D2C000800000000954700085D4900086D +:100040003B0300083B0300083B0300083B03000898 +:100050003B0300083B0300083B0300083B03000888 +:100060003B0300083B0300083B0300083B03000878 +:100070003B0300083B0300083B0300083B03000868 +:100080003B0300083B0300083B030008000000009E +:100090000000000000000000000000003B0300081A +:1000A0003B0300083B0300083B0300083B03000838 +:1000B0003B0300083B0300083B0300083B03000828 +:1000C0003B0300083B0300083B0300083B03000818 +:1000D0003B0300083B0300083B030008000000004E +:1000E0003B0300083B0300083B030008000000003E +:1000F0000000000000000000000000003B030008BA +:10010000000000003B0300083B0300083B0300081D +:1001100000000000000000000000000000000000DF +:100120003B0300083B0300083B0300083B030008B7 +:100130003B03000800000000000000000000000079 +:1001400000000000000000000000000089470008D7 +:100150003B0300083B0300083B0300083B03000887 +:100160003B0300083B030008000000000000000003 +:10017000000000000000000000000000000000007F +:10018000000000003B030008000000000000000029 +:100190003B03000800F002F800F0B8F80AA090E86D +:1001A000000C82448344AAF10107DA4501D100F032 +:1001B000ADF8AFF2090EBAE80F0013F0010F18BF47 +:1001C000FB1A43F00103184760C3000080C300001E +:1001D0000A444FF0000C10F8013B13F0070408BF6D +:1001E00010F8014B1D1108BF10F8015B641E05D00B +:1001F00010F8016B641E01F8016BF9D113F0080FC0 +:100200001EBF10F8014BAD1C0C1B09D16D1E58BF51 +:1002100001F801CBFAD505E014F8016B01F8016B88 +:100220006D1EF9D59142D6D37047000000230024FB +:1002300000250026103A28BF78C1FBD8520728BFF6 +:1002400030C148BF0B6070476E2900F07686702978 +:1002500000F0858166290AF01F8765290AF01C874E +:1002600067290AF0198761290AF0188703681B0AB1 +:1002700028BF41F08001692900F0F680642900F070 +:10028000F380752900F0F0806F2900F04787782906 +:1002900000F05181E92900F0E186E42900F0DE86D2 +:1002A000F52900F0DB86EF2900F04487F82900F0FB +:1002B00050810368DB0928BF41F08001632901F008 +:1002C0006185732901F06685E32901F07185F329C1 +:1002D00001F07685002070471FB50AF0D8FE9DE832 +:1002E000030000F039FD01F0CBFF040000200021E5 +:1002F0000AF07CFE401C6060002000210AF060FED5 +:10030000E06001F07DF800F0F5FC1FBD09F088FB0E +:100310001146FFF7E1FF02F088FC09F087FD0000BD +:100320000648804706480047FEE7FEE7FEE7FEE78F +:10033000FEE7FEE7FEE7FEE7FEE7FEE7F14900081D +:100340009501000870B5064600F0E6FC056806F168 +:100350000B0020F00704B4429CBF002070BD2B4668 +:100360006A68BAB11068A04210D304F1080188424B +:100370003CBF5068586007D351681019416011683C +:10038000091B016058601460101D70BD134652684F +:10039000002AE7D12146284600F0CAFC0028DED119 +:1003A00070BD70B50446051F00F0B6FC0068002C57 +:1003B00014BF446870BD002C18BFAC423CBF20463F +:1003C0006468F8D301680A18AA4218BF456003D1CF +:1003D0002A6805461144016028684119A1421CBFE2 +:1003E0006C6070BD6168696021680844286070BDF8 +:1003F000B2F120030AD5C2F1200301FA02F120FA7A +:1004000003F300FA02F041EA0301704700FA03F136 +:100410004FF00000704700001CB50C46064B7B44B3 +:1004200069460090204600F0A2FD0446002069467F +:1004300000F0B0FD20461CBD730B00000FB41CB5CE +:10044000084B06AA7B4469460090059800F08FFD92 +:1004500004460020694600F09DFD20461CBC5DF866 +:1004600014FB00004D0B00002DE9F041064600246E +:1004700010687529314616A510D000F0CAFC002876 +:1004800002DA404213A507E031688A0701D512A5B8 +:1004900002E0490704D511A5012401E000F0C2FCE7 +:1004A00000210A2206F1240709E0B0FBF2FCB0FBB0 +:1004B000F2F302FB1C00303078541846491C002827 +:1004C000F3D123462A463046BDE8F04100F0DCBCBB +:1004D000000000002D0000002B00000020000000A4 +:1004E000F0B40D460188090502D5214C7C4402E098 +:1004F0001F4C7C440E34002100F1240608E002F079 +:100500000F071209E75D42EA03721B097754491C81 +:1005100052EA0307F3D102780023120704D5702DA5 +:1005200006D009B1022311342246F0BC00F0ACBC65 +:1005300001231034F8E770B504460D4621461068D3 +:1005400000F070FC024629462046BDE870400023BA +:10055000C6E7D21D22F00703D3E90023C0E70368F2 +:10056000126843F0200303600823C3610023B7E748 +:1005700064BD00002DE9F05F894604464FF0000A93 +:10058000DFF874B1FB44C0F820A02046E16888473A +:10059000002874D0252806D0D4E901219047206A8C +:1005A000401C2062F1E700265F462046E16888474C +:1005B0002028054607DB312D05D2781910F8200CCC +:1005C00008B10643F1E7B00701D526F00406C4F8E8 +:1005D0001CA00027C4F818A02A2D09D0284609F02D +:1005E00027FA38B304EB8708303DC8F8185019E0F3 +:1005F00059F8041B204604EB87029161E1688847A3 +:10060000012F054618D1E069002820DA26F02006DF +:100610001DE0D8F8180000EB800005EB40003038F2 +:10062000C8F818002046E1688847054609F000FA36 +:100630000028EED1012F0AD02E2D08D12046E168E6 +:1006400088477F1C0546022F46F02006C4DBA069C0 +:10065000002803DA404246F00106A061F00701D00D +:1006600026F010066C2D0BD0682D09D04C2D39D0FA +:100670006A2D35D0742D35D07A2D33D016E038E080 +:10068000E1682F4620468847B842054609D16C2FBD +:1006900026D04FF48060E16806432046884705462F +:1006A00004E06C2F1AD04FF4807006430DB3A5F10F +:1006B0004100192802D8203546F400664A462946EA +:1006C000204626604E46FFF7BFFD80B101280BD0C3 +:1006D000F61D26F0070000F1080956E74020E4E780 +:1006E0008020D8E70020D6E706F104094DE7284628 +:1006F00052E7206ABDE8F09FF4BC00000FB400B5DB +:100700008DB010A9099000910B904FF0FF300A9026 +:1007100000200C90064878440690064878446A46C3 +:1007200007900F9909A800F023FD0DB05DF814FBA8 +:10073000770A00008F0A00002DE9FF5F1D464FF089 +:10074000FF3B91464FF000085F46D5E90146A96995 +:1007500001987F1C8847296A824688470028F6D17D +:10076000BAF1FF3F0CD0002E24F4C06419DD6006FE +:1007700014D5BAF12B0F09D0BAF12D0F0ED103E029 +:10078000584604B0BDE8F09F44F48064A96901981C +:100790007F1C8847761E8246002E02DDBAF1300F9C +:1007A00003D0B9F1000F26D032E0A969761E019876 +:1007B0007F1C44F400748847002E824605DDBAF1A0 +:1007C000780F06D0BAF1580F03D0B9F1000F10D04E +:1007D0001EE0B9F1000F02D0B9F1100F18D1A969CC +:1007E000761E01987F1C24F40074884782461020EE +:1007F00002E0082000E00A20814609E0A96908FB20 +:100800000908761E01987F1C44F4007488478246CC +:10081000002E05DD4946504600F096FC0028EDDA32 +:10082000E96901988847A00502D46FF00100A8E7A4 +:10083000E00725D1600613D5600502D5C8F1000098 +:1008400000E0404629680A1D2A600968220501D592 +:10085000087015E0220701D5088011E008600FE05C +:100860002868011D29600068210502D580F80080F4 +:1008700006E0210702D5A0F8008001E0C0F8008062 +:1008800038467EE770B50446C068810713D08006FD +:1008900001D5A56A04E0A169606808442169451A88 +:1008A000204600F069FD002206462946204600F059 +:1008B0008FFC304670BD002070BD70B510B1BDE832 +:1008C0007040DFE70025074C6E1E07E02046FFF76B +:1008D000D9FF00B13546206D20F00104002CF5D180 +:1008E000284670BD4C7000202DE9F0410C460746AB +:1008F0001646104600F078F82078611C61280AD06E +:10090000722802D077283CD102E00125002405E0BE +:100910000225042402E0082448F2020511F8010B24 +:100920002B2806D0622809D011F8010C74280AD0AF +:100930000BE045F0030544F00204EFE745F0040541 +:1009400044F00104EAE744F010043846214609F077 +:10095000B5F8411C15D00021316171604FF4007170 +:10096000F560F1617061200704D530460222002154 +:1009700000F02EFC306D40F0010030653046BDE8DF +:10098000F0810020FBE72DE9F0410D460646104CB2 +:10099000206DC10704D0410804D020F00104F7E71E +:1009A00022460EE05420FFF7CDFC07000ED0206D4C +:1009B00047F00101084354212065384600F032F920 +:1009C0003A4629463046BDE8F0418DE70020D6E79B +:1009D0004C70002011B14FF4807201E04FF480623E +:1009E0004FF4007300F070BC2DE9F04704464FF05F +:1009F00000094FF0FF37C568D4E90486A80707D07F +:100A0000204600F0B9FC304609F01AF8002802DA56 +:100A10003846BDE8F087280502D54046FFF7C1FCFF +:100A20004C21204600F0FEF8206D20F001002065EA +:100A30004846EEE72DE9F041074615460E461020E0 +:100A4000FFF780FC04000AD06760C4E9026500F08B +:100A500067F90168216004600020BDE8F081012091 +:100A6000FBE710B5431C02E010F8011B71B18107D0 +:100A7000FAD14FF0013202C88C1A8C4314EAC21129 +:100A8000F9D0C01A0A0603D0C01E10BDC01A10BD8E +:100A90000A0401D0801E10BD0902FCD0401E10BD0A +:100AA00040EA010370B59B072ED14FF00136042AAE +:100AB0002AD308C810C99D1B9D43121F15EAC615ED +:100AC00017D0D8B2E1B2401A50EA056110D198B2FD +:100AD000A1B2401A50EA05410AD123F07F4024F028 +:100AE0007F41401A50EA052102D1180EA0EB146094 +:100AF00070BDA342DBD018BA21BA884201D90120C7 +:100B000070BD4FF0FF3070BD0AB9002070BD10F805 +:100B1000013B11F8014B63B1A3420AD1521E08D028 +:100B200010F8013B11F8014B1BB1A34201D1521E39 +:100B3000EDD1181B70BD032A40F2308010F0030C79 +:100B400000F0158011F8013BBCF1020F624498BF20 +:100B500011F801CB00F8013B38BF11F8013BA2F1BD +:100B6000040298BF00F801CB38BF00F8013B11F038 +:100B7000030300F02580083AC0F0088051F8043BD8 +:100B8000083A51F804CBA0E80810F5E7121D5CBF45 +:100B900051F8043B40F8043BAFF30080D20724BF78 +:100BA00011F8013B11F801CB48BF11F8012B24BF0C +:100BB00000F8013B00F801CB48BF00F8012B70475B +:100BC00010B5203AC0F00B80B1E81850203AA0E8E8 +:100BD0001850B1E81850A0E81850BFF4F5AF5FEA1C +:100BE000027C24BFB1E81850A0E8185044BF18C9CF +:100BF00018C0BDE810405FEA827C24BF51F8043B76 +:100C000040F8043B08BF7047D20728BF31F8023BC9 +:100C100048BF11F8012B28BF20F8023B48BF00F85D +:100C2000012B70474FF0000200B5134694469646DC +:100C3000203922BFA0E80C50A0E80C50B1F12001EF +:100C4000BFF4F7AF090728BFA0E80C5048BF0CC09D +:100C50005DF804EB890028BF40F8042B08BF7047FB +:100C600048BF20F8022B11F0804F18BF00F8012B6D +:100C7000704700004FF0013C50F8042B51F8043B42 +:100C80009A4221D1A2EB0C03934313EACC1317D160 +:100C900050F8042B51F8043B9A4215D1A2EB0C03F7 +:100CA000934313EACC130BD150F8042B51F8043BB7 +:100CB0009A4209D1A2EB0C03934313EACC13DBD085 +:100CC0004FF00000704700BFD01A01BAB1FA81F1AD +:100CD00001F0180122FA01F0CB40C1F12001DBB292 +:100CE000C0B2C01A2CFA01F3D11A914311EAC31110 +:100CF000E6D1704770B5064C7C44064D7D4403E058 +:100D0000206820448047241DAC42F9D170BD00000A +:100D100078B900007CB90000004870474871002095 +:100D2000004870474C71002070477047704770470B +:100D300038B504460A460020694601F076FA0028D4 +:100D400008BF38BD02460099204600F01DFC012076 +:100D500038BD012001F03FBAF8B501F05BFA054655 +:100D600000200C46102000BF0646A819A0420DD94D +:100D700032466946002001F058FA070008BF01F02A +:100D80002AFA0098A04218BF0546C419FFF7C4FF0D +:100D900005600746F01D20F007004619284600F0C0 +:100DA0000AF8B44208BFF8BDA21B31463868BDE856 +:100DB000F84000F0E9BB00210160C0E90110704774 +:100DC0001020704770B5044685690068C10601D5DA +:100DD000302600E02026C00707D070BDD4E90121ED +:100DE00030469047206A401C20626D1EF6D570BDCB +:100DF00070B5044685690078C00707D170BDD4E995 +:100E0000012120209047206A401C20626D1EF6D5EB +:100E100070BD09684A0501D540B27047C905FCD5C7 +:100E200000B2704709684A0501D5C0B27047C905CC +:100E3000FCD580B2704770B50C460546012A05D036 +:100E40002878800600D5EA69002302E0012305E046 +:100E50005B1C934202D2E05C0028F9D1A869E61835 +:100E6000C01AA861286A184428622846FFF7AAFF1A +:100E700004E0D5E9012114F8010B9047B442F8D3FE +:100E80002846FFF7B5FF70BD2DE9F0470D4699469E +:100E90009246044600F124080168880604D5E069FA +:100EA00021F01001216000E00120A84201DD471B74 +:100EB00000E00027A1697A1902EB0900081AA06175 +:100EC0002078C00602D42046FFF77CFF002608E009 +:100ED000D4E901211AF806009047206A401C761CCC +:100EE00020624E45F4DB2078C0060AD52046FFF785 +:100EF00069FF06E0D4E9012130209047206A401CB8 +:100F00002062381EA7F10107F4DC07E0D4E90121D3 +:100F100018F805009047206A401C2062281EA5F1A1 +:100F20000105F3DC2046FFF763FF2078000602D5B9 +:100F30000220BDE8F0870120FBE711680268006A23 +:100F4000530501D508700AE0D30501D5088006E0F5 +:100F5000130603D5C217C1E9000200E008600120B2 +:100F60007047000001694A1C02610878704700B5AB +:100F70008FB0CDE901310021059105497944CDE9D2 +:100F8000031011466846FFF7F5FA0FB000BD0000E8 +:100F9000E5FFFFFF0A6802F8010B0A6070470000D6 +:100FA0002DE9FF5F15468A460446DFF8AC80F84419 +:100FB0000027D8E900103E46CDE9001010E03AF8CD +:100FC00016106A4602A801F0DAF8411C07D0217811 +:100FD000890603D5E269391891420DD80744761C79 +:100FE0002078800602D5E069B84205DDAE42E6DB36 +:100FF0003AF816000028E2D1A069C01BA061204683 +:10100000FFF7E0FED8E90010CDE90010002017E05E +:101010003AF818106A4602A801F0B1F8B0F1FF3FA3 +:1010200081460BD000250DF1080B05E0D4E9012124 +:101030001BF8050090476D1C4D45F7D308F10100E2 +:10104000B0428046E4DB206A384420622046FFF745 +:10105000CFFEBDE8FF9F0000DEB200002DE9F041A9 +:101060008046D21D22F007020025D2E90002F529B0 +:1010700015A614D0011E72F1000106DA0023D0EB90 +:10108000030063EB020211A608E0D8F800108B07FA +:1010900001D50FA602E0490701D50EA6012511468C +:1010A000002408F1240704E000F088FA30323A55B1 +:1010B000641C50EA0102F7D12B46324621464046D5 +:1010C000BDE8F041FFF7E0BE000000002D00000089 +:1010D0002B0000002000000030B4002100F12404A7 +:1010E00008E002F00705D208303542EA4372DB0817 +:1010F0006554491C52EA0305F3D10468002310A289 +:10110000250708D504F020040C4304D0C46901234A +:101110000CA2641EC46130BCFFF7B6BE10B5044615 +:1011200021461068FFF77EFE02462046BDE81040CB +:101130000023D1E7D21D22F00701D1E90023CBE73C +:1011400000000000300000003A2800D2303820F0C3 +:101150002002412A01D3A2F13700884201D34FF087 +:10116000FF307047026811441378016018467047D9 +:10117000D1600549794451610449794411620021E3 +:101180001161114600F020BEEDFFFFFFC904000011 +:10119000426842B1016811F8013B23B1521EC0E917 +:1011A0000012184670470121C160881E70474268CE +:1011B0005AB1C368016843B983688B4205D0491EA0 +:1011C000521CC0E90012002070474FF0FF307047FA +:1011D0002DE9F041044616460D464769007B80071D +:1011E0002ED0384608F056FC50BB3EB3012E02D03C +:1011F000022E25D104E0204600F0A0FF05441DE0AA +:10120000384608F033FCE168002841F01001E16045 +:1012100005DA204600F07CF80120BDE8F081C90322 +:101220000BD56268E16A914200D81146A269114467 +:101230002269891A814200DD08460544002D01DA41 +:101240000220EAE7E16A6068E268814206D291031F +:10125000E06203D522F4003141F01002A6690027B4 +:10126000AE4213DCE16A814201D90B4600E003463D +:1012700003EB060C2369ACEB030CAC4506DD8142A5 +:1012800001D98C4600E084469C4505D1A7602760C3 +:1012900042F02000A5620DE0AD1BE669AE1B814265 +:1012A000A66000D90846C01A281A20605819606044 +:1012B00022F0200003490840E060002084F84870D4 +:1012C000ABE70000BFCFD7FF70B5C468A50713D048 +:1012D000650211D4B2F5807F09D0B2F5007F06D047 +:1012E000B2F5806F08D1012300F1240106E05D1EF4 +:1012F0006FF07F46B54201D3012070BD0161C3612B +:10130000416024F470611143C160002070BD000091 +:10131000C16821F4001141F08001C16000218160A9 +:10132000016070472DE9F047814614460E464FF0A4 +:10133000FF383248D5685769054209D03846A16957 +:1013400008F098FC002811DB2C48C0430540E560FC +:101350002B4632464946384608F0A0FCA16920F0E9 +:101360000042B21A11440028A16103D02046FFF7C1 +:10137000CFFF4046BDE8F08770B504460569C06AF6 +:101380006168884200D80846E16821F42011E160D4 +:10139000C90312D5A84208D02246411B2846FFF7B0 +:1013A000C1FF10B14FF0FF3070BD0020E562C4E90D +:1013B0000150E06820F48030E060002070BD10B57E +:1013C0000446C06820F02000E060A16AA06988425D +:1013D0000DD02046FFF7D0FFE06820F4405040F0E9 +:1013E0001000E060A06AA0612069E062606044F2E1 +:1013F0004001E0688843E06010BD0000100002007A +:1014000010B542485421FFF70DFC41485421FFF725 +:1014100009FC40485421FFF705FC3F493B483C4A42 +:101420003F4B08603D490A603A491960531C036507 +:10143000481C1065012008653B48344A39A17844AE +:10144000FFF752FA20B9384878440A3800F0BCFE59 +:1014500037482F4A35A17844FFF746FA20B9344877 +:1014600078440A3800F0B0FE32482A4A2FA1784466 +:10147000FFF73AFA20B92F4878440A3800F0A4FE62 +:1014800040232248DC0000212246FFF71DFF20B147 +:1014900025487844543800F097FE1D4822464023E2 +:1014A0000021FFF711FF20B121487844543800F0A3 +:1014B0008BFE1848224610230021FFF705FF002865 +:1014C00006D01C487844BDE81040563800F07CBE79 +:1014D00010BD104870B5006D20F001040B48FFF7F7 +:1014E00083FA0B48FFF780FA0A48FFF77DFA09E014 +:1014F000206D20F001052046FFF776FA2046FEF722 +:1015000050FF2C46002CF3D170BD00004C70002021 +:10151000A0700020F47000201004002014040020AB +:101520001804002072000000829E00007700000076 +:10153000719E0000619E00002DE9F0410646FFF714 +:10154000EFFB8046454613E016B1E068B0420ED18D +:1015500020682860D4E90101D8F800708847204647 +:10156000FEF71FFFD8F80000B842EBD100E0254697 +:101570002C68002CE8D1BDE8F08110B500F032FEF7 +:10158000BDE8104000F01BBE034640688C460028B2 +:1015900018BF88423CBF03464068F8D31868184417 +:1015A000884207D00CF1030020F00700001D411A0B +:1015B000521A0146081D0A60FEF7F3BE30B5B0F1BD +:1015C0000A024FEA900E71F100034EEA817EB0EB01 +:1015D0000E0061EB91014FEA101E4EEA017E10EB06 +:1015E0000E0041EB11114FEA102E4EEA016E10EB86 +:1015F0000E0041EB11214FEA104E4EEA014E10EB66 +:101600000E0041EB1141401841F100014FEAD000BA +:1016100040EA41704FEAD10110EB80054FEA8104A6 +:1016200044EA907444EB01046D1944EB0404521B2A +:10163000A3414FF0000348BF0A3200D530BD401C23 +:1016400041F1000130BD10B5044600F011FE006804 +:10165000005D00F0010010BD70472DE9FF4F0C4602 +:101660001E464FF0FF378BB0D2E90001DDF86080F5 +:101670000A908A46C1F30A5505B93D46002108463D +:101680004FF00000BAF1000F00F4400005DA00EB63 +:1016900080004FF4400101EA50004FEA9059B9F13F +:1016A000010F00DDB9460A9850EA4A000ED044F610 +:1016B0001050A5F2FF3545432F14B8F1000F1ED08E +:1016C0007542291E1EDDC9F100021CE0B8F1010FB0 +:1016D0004FF0000001D0302103E0F24305E0215437 +:1016E000401CB042FBDB30460022002121540B9904 +:1016F000C1F80880C1E900200FB0BDE8F08FBD1B24 +:101700006D1CDEE74A4600DA694206A800F000FEDA +:1017100006AB93E8070003AB83E8070050460A993D +:1017200000F0C8FE8DE80700A0F500501F380090BB +:101730000398002D09DD42F21F014A46084403A91F +:101740000390684601F027F908E0A0F500504A46EA +:101750001F3803A90390684601F031F98DE80700AE +:101760000004000C03D04FF0FF30410800E01046A9 +:10177000B8F1000F03D00022009215461EE0751E3E +:1017800005D4FFF71BFF303262556D1EF9D5B34605 +:101790000122084302D000227F1C04E02078302878 +:1017A00001D100227F1E002A099786D01DE0112D4D +:1017B00007DAFFF703FF303262556D1C50EA010271 +:1017C000F5D1084302D00098C8B10EE00021681E90 +:1017D00005E0235C625C63542254401E491C814234 +:1017E000F7DBAB46A81B401E0990002004F80B0055 +:1017F0000B98099AC0F80880C0E9002B7CE71126F5 +:101800004FF0000859E72DE9F04F88460446D21DF5 +:1018100022F0070191B0D1E90001CDE90A0108F0F9 +:1018200067F802460B98C00F01D02D2007E0206812 +:10183000810701D52B2002E0202101EAC000032A04 +:10184000099001D0072A05DB03464146204600F0F7 +:101850001FFD0BE12078800601D5E06900E006203D +:10186000B8F1650F814606D0B8F1660F18D0B8F10F +:10187000670F70D131E00020B9F1110F009001DB4A +:10188000112301E009F101030AAA01A90CA8FFF73D +:10189000E4FEDDE90C70002609F10105834647E00E +:1018A00001204B4600904FF000470AAA01A90CA85E +:1018B000FFF7D3FEDDE90DB00C995D46002610B9A7 +:1018C00009F101000D18B9EB050003D4C0F1FF3692 +:1018D00009F10105A5EB09002BE0B9F1010F01DACF +:1018E0004FF001090020B9F1110F0090484601DDC9 +:1018F000112300E003460AAA01A90CA8FFF7ADFED8 +:10190000DDE90C704D4600268346207800070AD496 +:10191000AB4500DA5D4601A8012D04DD411911F83F +:10192000011C302907D04F4502DA17F1040F04DA01 +:10193000012082460FE06D1EEEE7002F02DCED1B5A +:101940003E4403E0781CA84200DD7D1CB81B00F17A +:10195000010A4FF000472078000703D4AA4501DBB5 +:101960004FF0FF3A0021B7F1004F0DF143088DF819 +:10197000431024D002202B23002F01DA7F422D2395 +:101980000A21021EA0F1010000DC5FB197FBF1FC0F +:1019900097FBF1F201FB1C7C17460CF1300C08F8A8 +:1019A00001CDEEE7A8F1010003702188090501D5FA +:1019B000452100E06521A0F1010800F8011C09980B +:1019C0000FA9A1EB0807FF1D00B10120411901EB90 +:1019D000EA70A1693844081A401EA0612078C00648 +:1019E00002D42046FFF7EEF9099828B1D4E9012185 +:1019F0009047206A401C20622078C00622D52046ED +:101A0000FFF7E0F91EE0002E04DBB34502DD01A87C +:101A1000805D00E03020D4E901219047206A401C1D +:101A20002062761CAAF101005FEA000A0AD100F0E8 +:101A300027FCC0680168405CD4E901219047206A16 +:101A4000401C2062281EA5F10105DCDC07E0D4E97A +:101A5000012118F8010B9047206A401C2062381EB3 +:101A6000A7F10107F3DC2046FFF7C2F9032011B00C +:101A700043E600002DE9F04F04460D46D21D22F04A +:101A8000070089B0D0E900974846394607F030FF93 +:101A90000246F80F01D02D2307E02068810701D509 +:101AA0002B2302E0202101EAC0038DF820300BB186 +:101AB000012000E00020032A824601D0072A04DB2F +:101AC0002946204600F0E4FB3FE12078800601D45F +:101AD0000D2500E0E569C7F30A560D2D49DA00210E +:101AE0004FEA175B08464FF00000002F00F440005B +:101AF00007DA00EB80004FF4400100EBD07001EA00 +:101B000060008115012901DD4FF0FF3100224FEA0D +:101B1000850CBCF1180F06D31346ACF118004FF03A +:101B20008052C24003E04FF4801323FA0CF30CF10F +:101B30000C0CBCF1200F04D3ACF1200C09FA0CF012 +:101B400001E007FA0CF000294FF0004801DD18B958 +:101B50000FE00ED140450CD319EB02095F4121B9CA +:101B6000404502D19F4329EA0209BBEB175F00D031 +:101B7000761C2088000502D57B48784402E07A482C +:101B80007844193808AA302302F80A30037C0AF195 +:101B90000101002E0AF1020A53546A4602DC4FF09A +:101BA000300101E04FF031014FF001088DF80010D5 +:101BB00002D0A6F2FF3603E059EA470100D06B4E8F +:101BC000002D02DC2178090704D54FF002082E21F0 +:101BD0008DF80110C44600210BE0C7F303433F0119 +:101BE000C35C491C6D1E02F80830052908F1010884 +:101BF00001DA002DF1DC00210CE000EB1973491C27 +:101C00001B786D1E082902F808304FEA091908F1FF +:101C1000010801DA002DF0DC21688B0602D516E000 +:101C2000A8F10108E04505DD02EB080313F8013CCB +:101C3000302BF5D0B8F1000F09DD02EB080313F8E3 +:101C4000013C2E2B03D1090701D4A8F10108002D76 +:101C500005DD3E2102F808106D1E08F10108407CE8 +:101C6000002E02F8080008F1010804DA2D2076425F +:101C700002F8080002E02B2002F808000A214FF4C5 +:101C80007A70864208F101080BDB96FBF0F33033E3 +:101C900002F8083096FBF0F308F1010800FB136628 +:101CA00001E0642E0CDB642096FBF0F3303302F885 +:101CB000083096FBF0F308F1010800FB136601E021 +:101CC0000A2E06DB96FBF1F0303002F8080008F12E +:101CD000010896FBF1F001FB1060303002F80800BB +:101CE000A16908F1010808EB050202EB0A00081AD5 +:101CF000A0612078C00602D42046FFF763F8216A6D +:101D000008AE01EB0A00206204E0D4E9012116F8D4 +:101D1000010B9047BAF1010AF7D22078C00602D52C +:101D20002046FFF74FF86E4609E016F8010B3E28F3 +:101D30000FD0D4E901219047206A401C2062B8F1FD +:101D40000108F2D22046FFF753F809B00320BDE89E +:101D5000F08F206A2844206203E0D4E9012130207A +:101D600090476D1EEBD3F8E72DA7000002FCFFFFA4 +:101D700010B5436913B1AFF3008001E0FFF75BF8E2 +:101D8000012010BD127800F124010A7000224A706F +:101D90000122EDE711684FF0FF32E9E710B5436922 +:101DA00013B1AFF3008001E0FFF7FAF8012010BD96 +:101DB000128800F1240182840022C2840122EDE70E +:101DC00011684FF0FF32E9E72DE9F34F4FF0000AB9 +:101DD0000C4656468DB001200C9001F10C000B9082 +:101DE00062690B9801219047051E2DD0252D2CD01E +:101DF000216A8847C0B162690B9801219047216A26 +:101E000088470028F7D16269411E0B98904700E08F +:101E1000761CA1690D988847216A88470028F7D168 +:101E2000E1690D988847DBE7A1690D988847A842CA +:101E3000074601D1761CD3E7E1690D9888477F1CDE +:101E400002D1BAF1000F6FD06BE162690B980027E5 +:101E50003D46394690472A2804D162690B980121F2 +:101E600090470125DFF8D08262690B9801219047E5 +:101E7000A0F130010A290AD24745E5DC07EB8701CA +:101E800000EB4107303FDFD445F01005ECE7E906F1 +:101E900001D46FF000476C280AD04C2814D0682871 +:101EA00015D06A280DD074281CD07A281AD01DE0CD +:101EB00062690B98012190476C2802D045F0040517 +:101EC00014E045F002050DE045F020050AE06269E6 +:101ED0000B9801219047682802D045F0080505E0DD +:101EE00045F4006562690B9801219047C4E90157E8 +:101EF00065283DD019DC58287AD00CDC452837D02D +:101F000004DC252826D041289ED131E046282FD058 +:101F1000472899D12CE05B2877D0612828D0632806 +:101F20007CD0642823D15AE0F6E06F2848D008DC42 +:101F300066281DD067281BD0692821D06E2816D1AD +:101F400027E0702845D0732868D0752847D07828B6 +:101F50000DD14DE0A1690D988847252805463FF42D +:101F600069AFE1690D9888476D1C3FF46AAFD8E00E +:101F70000D9923466A466FF00100AFF30080C5E07B +:101F800045F0400023464FF000026060A80736D4B9 +:101F90003EE0E8077FF447AF2068011D216000683C +:101FA000290501D506701BE7290701D5068017E72B +:101FB000A90703D5F117C0E9006111E706600FE733 +:101FC00045F0400023464FF008026060A80716D491 +:101FD0001EE040F60E0125EA0100606016E045F0C3 +:101FE000400023464FF00A026060A80707D40FE0C4 +:101FF00045F040006060A80708D5234610220D99DF +:102000006FF00100AFF3008080E007E0102223466C +:102010000D996FF00100FEF78FFB77E04FF000099C +:1020200063284F46C8464B46CB4602D05B2806D0B5 +:1020300038E0E80601D40120A060012732E062699F +:10204000D4F80CB00B98012190475E2807D14FF0CF +:10205000010949466269D4F80CB00B989047216990 +:1020600039B900210A4603AB43F82120491C08294D +:10207000FADBD8B3216949B308F1010862690B980A +:10208000012190475D28F4D1B9F1000F09D000205B +:1020900003A951F82020D24341F82020401C0828F1 +:1020A000F7DB03AB2069002820794FEA40701ED08F +:1020B0005B462246CDF80080CDE901970D990028B6 +:1020C0006FF0010020DAAFF300801FE0C11703AA10 +:1020D00000EBD1614B1121F01F0102EB8302411A89 +:1020E00013680120884003431360C7E719E00D9986 +:1020F000224600286FF00100009702DAAFF300805B +:1021000004E0AFF3008001E0AFF3008000280ADABA +:10211000401C06D10C9820B14FF0FF300FB0BDE845 +:10212000F08F5046FAE7E90701D10AF1010A0644A7 +:1021300000200C9054E60000CCCCCC0C10B501462D +:10214000C268900703D0900607D5886A0AE000F0BD +:102150009BF801210160881E10BD8B6948681844F6 +:102160000B69C01A91F848301BB191F84910401A18 +:1021700010BD1103FCD50028FADD401E10BD70B55E +:1021800016460C46054600F073F8036893F8010103 +:10219000012806D0FF2C0FD8185D68B101202C70E3 +:1021A00070BDD3F807013246214603F207130344FA +:1021B0002846BDE8704018474FF0FF3070BD00283A +:1021C00001D000F04FB8704710B500F029F9BDE814 +:1021D0001040FFF7F4BF10B500F03CF9BDE8104027 +:1021E000FFF7EDBF10B5002102A000F0FFF80120BD +:1021F00010BD00005349475056464E3A2050757264 +:1022000065207669727475616C20666E2063616CFE +:102210006C656400124B694600F580528A421A6070 +:1022200001D8114670471960704730B50C4D6B46A8 +:10223000A3F580532C6822449A420FD89B1A02F5CA +:10224000805003EBD37302EB6303984200D9184626 +:10225000C01D20F007020C60101B2A6030BD00007A +:102260001C04002001491820ABBEFEE72600020036 +:1022700010B500F005F8001D10BD00BF718D000005 +:10228000004870475071002000487047647100207A +:102290002DE9F0411F46044603260168072A01F490 +:1022A000006004DB08B116A505E016A503E008B13F +:1022B00015A500E015A521F010002060A069C01E42 +:1022C000A0610FB1401EA0612046FEF77BFD4FB11B +:1022D000D4E9012138469047206A401C2062C01C86 +:1022E000206206E0206AFAE7D4E9012115F8010B23 +:1022F0009047761EF8D22046FEF77AFDBDE8F081C1 +:102300004E414E006E616E00494E4600696E660099 +:102310002DE9F047814616468AB0334878440DC807 +:102320008DE80D0030487844801C03AC0DC884E86B +:102330000D0041F69B300844372190FBF1F290FBF1 +:10234000F1F5A5F1800501FB12041B3C02D56442A6 +:10235000012000E00020DFF890A080460027FA442A +:10236000AAF1BE0A0DE0E00709D03246684607EB45 +:1023700047010AEB810100F022FB8DE807006410A1 +:102380007F1C002CEFD1184F7F44AC3F18E0E807CA +:1023900014D007EB04100DF1180A90E80E008AE83B +:1023A0000E00C068F04201D198190890324606A983 +:1023B00003A800F004FB03AB83E807006D10641C66 +:1023C000002DE4D132466946B8F1000F03A802D0CF +:1023D00000F0E1FA01E000F0F2FAC9E90001C9F801 +:1023E00008200AB0BDE8F0871CA0000070B50546C3 +:1023F0000C460A2000E06D1C00F054F835B1287836 +:102400000028F8D102E0641C00F04CF814B12078E8 +:102410000028F8D1BDE870400A2000F043B8000061 +:1024200010B5014602A0FFF7E1FF012010BD00003A +:1024300053494752545245443A2052656469726583 +:1024400063743A2063616E2774206F70656E3A2062 +:102450000000000010B5012805D0002103A0FFF7FF +:10246000C5FF012010BD09A1F8E7000053494752FC +:10247000544D454D3A204F7574206F662068656154 +:1024800070206D656D6F7279000000003A2048651C +:102490006170206D656D6F727920636F72727570F7 +:1024A0007465640008B569468DF800000320ABBE72 +:1024B00008BD70475FEA400C08BF91F0000F4FEA7B +:1024C0008C234FEAC12243EA51514FEA1C5018BFF6 +:1024D00000F5F0404FEA300018BF41F000415FEADC +:1024E0006C5C00F02980BCF1FF3F08BF40F08040E9 +:1024F0007047130C06BF12044FF0100C4FF0000C85 +:10250000130E04BF12020CF1080C130F04BF1201CA +:102510000CF1040C930F04BF92000CF1020CD30FCA +:1025200004BF52000CF1010C11464FF00002A0F163 +:102530001F00A0EB0C00704711F0004F08BF704760 +:1025400031F000413FF4D5AF0B0C06BF09044FF04A +:10255000100C4FF0000C0B0E04BF09020CF1080C1C +:102560000B0F04BF09010CF1040C8B0F04BF890091 +:102570000CF1020CCB0F04BF49000CF1010CCCF1A3 +:102580002003A0EB0C0022FA03F302FA0CF241EA5A +:10259000030100F10100704720F07F4C80EA030046 +:1025A00023F07F47ACEB070303F57C5300F00040BA +:1025B00003F1FF032DE980494FEA154B09B44FEAB7 +:1025C000144325EA0B4E24EA03480FF2042606EBD7 +:1025D000132749083E785FEA320203FB0667C7F516 +:1025E000000707FB06F64FEA54374FEAD64606F1D6 +:1025F000020607FB066CCCF1005C4FEA1C472CEA94 +:10260000074C07FB06F40CFB06F504EB15464FEAF6 +:10261000961634BF00204FF000404FEAD13706FB3A +:1026200007FC4FEA1C4C0CFB0BF7D21B03FB0CF70F +:1026300061EB07010CFB0EF7B0EB074072EB1742A2 +:102640000CFB08F734BFA2EB0742B2EB074261EB89 +:1026500017414FEA0C444FEA910706FB07FC4FEA8B +:102660001C4C0CFB0BF7B0EBC74072EB573203FB73 +:102670000CF734BFA2EBC742B2EBC74261EB573154 +:102680000CFB0EF7B0EBC70072EB57720CFB08F7B0 +:1026900034BFA2EBC702B2EBC70261EB5771039FD5 +:1026A0004FEA816141EA921104EBCC044FEAD13741 +:1026B0004FEA826206FB07FC42EA90124FEA806012 +:1026C0004FEA1C4C0CFB0BF7D21B03FB0CF761EB26 +:1026D00007010CFB0EF7B0EB074072EB17420CFB47 +:1026E00008F734BFA2EB0742B2EB074261EB174198 +:1026F0004FEA8C554FEA910704EB9C2406FB07FC3C +:102700004FEA1C4C0CFB0BF7B0EBC74072EB573297 +:1027100003FB0CF734BFA2EBC742B2EBC74261EB3D +:1027200057310CFB0EF7B0EBC70072EB57720CFB86 +:1027300008F734BFA2EBC702B2EBC70261EB5771D7 +:1027400015EB4C254FEA816141EA92114FEA826212 +:102750004FEAD13742EA901206FB07FC44F100042D +:102760004FEA80604FEA1C4C0CFB0BF7D21B03FBBB +:102770000CF761EB07010CFB0EF7B0EB074072EBB7 +:1027800017420CFB08F734BFA2EB0742B2EB07423B +:1027900061EB174115EB1C154FEA813141EA92417B +:1027A0004FEA823242EA90424FEA80304FEA0C769A +:1027B00044F1000448EA03434EEA0B484FF0000E90 +:1027C000B2EB080C71EB030724BF624639464EEBAF +:1027D0000E0E4FF0000B0018524149414BEB0B0B12 +:1027E000B2EB080C71EB03077BF1000B24BF6246D0 +:1027F00039464EEB0E0E4FF0000B00185241494186 +:102800004BEB0B0BB2EB080C71EB03077BF1000BEE +:1028100024BF624639464EEB0E0E51EA020718BF3E +:1028200046F0010616EB0E7655F1000254F1000158 +:1028300003D5BDE88901BDE80088BDE88901BDE890 +:102840000048B619524141EB0101A3F10103704761 +:1028500080807F7E7D7C7B7A7978777676757473DD +:10286000727171706F6E6E6D6C6C6B6A6A6968689C +:10287000676666656464636362616160605F5F5E32 +:102880005E5D5D5C5C5B5B5A5A59595858575756A8 +:10289000565555555454535352525251515050500D +:1028A0004F4F4F4E4E4D4D4D4C4C4C4B4B4B4A4A5F +:1028B0004A494949484848474747474646464545A3 +:1028C00045444444444343434342424242414141DC +:1028D000002B26D4770021D01CB54FEA370703B46C +:1028E0004FF010004FF010014FF000000FBCBDE89A +:1028F00010400BF1010BBBF1010F08BF5FEA170796 +:1029000022BF12F1010211F101014FF0004143F128 +:10291000000300F0004043EA00007047F9D3570875 +:10292000DAE746EA064613F1400F4FEA16461FDD86 +:1029300013F1200FDFBF16430A46002120335B420C +:10294000C8D0C3F1200746EA064602FA07F74FEA65 +:10295000164646EA0706C3F1200722FA03F201FAF7 +:1029600007F721FA03F14FF0000342EA0702B1E74B +:1029700046EA020646EA06464FEA164646EA0106D7 +:10298000BCBF46EA0646360C4FF000034FF000028B +:102990004FF000019EE72DE9C048934630B491E81E +:1029A000380007C831EA400C48BF34EA430C03D56D +:1029B000FFF7F2FDFFF78CFFF0BCBDE800882DE9C2 +:1029C000C048934630B491E8380007C810F0804FF3 +:1029D00008BF13F0804F03D100F005F8FFF778FF30 +:1029E000F0BCBDE8008820F07F4780EA030023F0B8 +:1029F0007F4C07EB0C03A3F57C5300F00040A3F1E0 +:102A0000FE0392F0000F00F0B38095F0000F00F08D +:102A100077802DE901494FEA11404FEA144621EA37 +:102A2000004800FB06FC24EA064708FB06F607FB05 +:102A300008F800FB07F718EB06484CEB164C4FEA7A +:102A4000124B18EB07484FEA15464CEB174022EAA9 +:102A50000B4E0BFB06FC25EA06470EFB06F607FBB2 +:102A60000EFE0BFB07F71EEB064E4CEB164C4FF021 +:102A700000061EEB074E4CEB174B18EB0B0840F112 +:102A8000000018EB0E0B58EB000840F100008F1A05 +:102A90004FF000013CBFC943661B14BFB5EB040CEB +:102AA00000213CBFC943F61B4FEA17444EEA8E0E85 +:102AB00027EA04454FEA1C4704FB07622CEA074C4F +:102AC00005FB07F70CFB05F604FB0CFC16EB0746B1 +:102AD00042EB174216EB0C4642EB1C421BEB060680 +:102AE00058EB0202414146EA9E0601D5BDE8018944 +:102AF000B619524141EB0101A3F10103BDE801897F +:102B00004FEA14454FEA114724EA054621EA074CEB +:102B100005FB07F406FB07F70CFB06F105FB0CFCB5 +:102B200011EB074144EB17444FEA124711EB0C41FC +:102B300044EB1C4422EA074C05FB07F206FB07F7AF +:102B40000CFB06F605FB0CFC16EB074642EB1742A6 +:102B500016EB0C4642EB1C456A1854F1000148BFC5 +:102B60007047B619524141EB0101A3F101037047CF +:102B700095F0000F37D04FEA11424FEA144721EA8F +:102B8000024624EA074C02FB07F106FB07F70CFBA1 +:102B900006F402FB0CFC14EB074441EB17414FEA2F +:102BA000154714EB0C4441EB1C4125EA074C02FB92 +:102BB00007F506FB07F70CFB06F602FB0CFC16EB11 +:102BC000074645EB174516EB0C4645EB1C42121920 +:102BD00051F1000148BF7047B619524141EB010164 +:102BE000A3F1010370474FEA14454FEA114724EA65 +:102BF000054621EA074C05FB07F106FB07F70CFB2E +:102C000006F24FF0000605FB0CFC12EB074241EB0D +:102C1000174112EB0C4251EB1C4148BF7047921810 +:102C200041EB0101A3F10103704710B507F0D5FC9A +:102C300007F0D2FCBDE8104007F0DCBB00210160CA +:102C4000C1607047FEE7000010B50146034802F07E +:102C500061F9024802F03EF9002010BDD0090020C1 +:102C60000A46094910B5D1F81812D1F814120029F2 +:102C70001CBF012010BD0146034802F051F9BDE818 +:102C80001040014802F054B9D009002070470000FC +:102C9000002251B1012908BF4FF4807205D00229EA +:102CA0000CBF4FF400724FF440720E490B6823F4CE +:102CB00040730B600B681A430A600A6822F0F8023E +:102CC0000A600A68F82393FAA3F3B3FA83F39840EF +:102CD00040F0020010430860086840F4803008604B +:102CE00070470000103C02402049086810F0100FA7 +:102CF0001F4805D0C26942F01002C26110220A606A +:102D00000A6812F0200F05D0C26942F00802C261C1 +:102D100020220A600A6812F0400F05D0C26942F012 +:102D20000402C26140220A600A6812F0800F05D0D6 +:102D3000C26942F00202C26180220A600A6812F48B +:102D4000807F06D0C26942F00102C2614FF48072F6 +:102D50000A600A6812F0020F08BF7047C26942F0A9 +:102D60002002C26102200860704700000C3C024053 +:102D70003409002070B5174904460020C86100F0EE +:102D8000D9F9154D0646286810F4803F0FD000BFD2 +:102D9000B4F1FF3F07D024B100F0CCF9801BA04272 +:102DA00001D9032070BD286810F4803FF0D1286855 +:102DB00010F0010F1CBF0120286028684FF4F97142 +:102DC00031EA00001CBF002070BDFFF78DFF01201D +:102DD00070BD0000340900200C3C024090F8351012 +:102DE000022903D08021416501207047052180F828 +:102DF00035100068016821F0010101600020704772 +:102E000031B508F0A1F8044608F09EF80099001BBF +:102E100001EB4102C2EBC111B0EBC10FF4D338BDDD +:102E20000348016841F00041016000207047000044 +:102E3000103C02402DE9F0472D4F81461546387E63 +:102E400098460E46012804BF0220BDE8F087012005 +:102E500038764CF25030FFF78DFF08BB254CB9F1A6 +:102E6000000F21D0B9F1010F2AD02068B9F1020F6B +:102E700020F440702060206830D040F44070206022 +:102E8000206840F0010020603560C6F8048000BF73 +:102E90004CF25030FFF76EFF216821F001012160F4 +:102EA00000213976BDE8F087206820F4407020606A +:102EB00020682060206840F0010020603570E7E75E +:102EC000206820F440702060206840F4807020600A +:102ED000206840F0010020603580D9E740F40070A0 +:102EE0002060206840F0010020603560D0E70000DD +:102EF00034090020103C02400648006810F0004FE2 +:102F000004BF01207047044904480160044901607E +:102F100000207047103C024023016745043C0240FA +:102F2000AB89EFCD2DE9F84F00227A4EDFF8E8E1CA +:102F300001274FF0030A4FF00F0800BF0B6807FA94 +:102F400002F42340A3427DD1D1F804C0BCF1020FAA +:102F500018BFBCF1120F15D14FEAD20C00EB8C0553 +:102F6000D5F820904FEA427C4FEADC6C08FA0CFB63 +:102F700029EA0B09D1F810B00BFA0CFC4CEA090C49 +:102F8000C5F820C0D0F800904FEA420C91F804B088 +:102F90000AFA0CF50BF0030B29EA05090BFA0CFBF6 +:102FA0004BEA0909C0F80090D1F80490B9F1010F7B +:102FB00018BFB9F1020F05D0B9F1110F18BFB9F15F +:102FC000120F18D1D0F80890D1F80CB029EA0509F1 +:102FD0000BFA0CFB4BEA0909C0F80890D0F80490F2 +:102FE00029EA040491F80490C9F3001909FA02F9D6 +:102FF00049EA04044460C468AC438D6805FA0CFCDB +:103000004CEA040CC0F80CC0D1F804C01CF0805F7E +:1030100079D0D6F800C04CF4804CC6F800C0D6F881 +:1030200000C00CF4804CCDF800C022F0030C0CF171 +:10303000804C0CF5983CDCF808589407240F08FAEB +:1030400004F900E05FE025EA0905A0F18049B9F53F +:10305000003920D0A0F18049B9F5013908BF4FF0FF +:10306000010918D0A0F18049B9F5023908BF4FF025 +:10307000020910D0A0F18049B9F5033908BF4FF01B +:10308000030908D0A0F18049B9F504390CBF4FF00D +:1030900004094FF0050909FA04F42C43CCF8084858 +:1030A000DEF800C04C682CEA030C14F4803F18BF13 +:1030B0004CEA030CCEF800C0184CD4F800C04D68A0 +:1030C0002CEA030C15F4003F18BF4CEA030CC4F8BB +:1030D00000C0134CD4F800C04D682CEA030C15F462 +:1030E000801F18BF4CEA030CC4F800C00D4CD4F884 +:1030F00000C04D682CEA030C15F4001F18BF4CEA01 +:10310000030CC4F800C0521C102AFFF417AFBDE82E +:10311000F88F000044380240003C0140043C01406C +:10312000083C01400C3C0140002A08BF09048161B1 +:10313000704700000148006870470000E801002067 +:1031400002480168491C016070470000E801002046 +:103150000B4810B5016841F400710160016841F449 +:1031600080610160016841F480710160032000F01A +:10317000A3F80F2000F006F800F05EF8002010BD64 +:10318000003C024038B523480025016841F00801A1 +:103190000160006800F0080000901F48016841F0DD +:1031A00008010160016821F00801016001F0DEFB07 +:1031B0001B4C1A481C492060681EE06019480068D2 +:1031C0002561B0FBF1F0401EC4E9010520466561B0 +:1031D00001F0E6F81549322006F0A2FB14494FF43D +:1031E0008020C1F800010021204601F0F5F80421FB +:1031F000204601F0F1F82068416A0E4A116001F59D +:103200007A7181632068C16841F00401C1600020C7 +:1032100038BD00004038024020380240000C004019 +:10322000200400209801002040420F008DAE0008CD +:1032300004E000E094010020704700F01F0101222B +:1032400002FA01F14009800000F1E020C0F800110D +:1032500070470000174B10B41B68C3F30223C3F17F +:10326000070CBCF1040F88BF4FF0040C1C1D072C89 +:1032700034BF0023DB1E012404FA0CFCACF1010C6A +:103280000CEA0101994004FA03F35B1E1A40114352 +:1032900000284FEA0111A1BF00F1E02080F80014DE +:1032A00010BC704700F00F0000F1E02080F8141D02 +:1032B00010BC70470CED00E0074900F007000A68F9 +:1032C0004FF6FF031A4042EA002040F0FD7040F044 +:1032D00080600860704700000CED00E0006841620B +:1032E0000020704770B400680023D0F824C0002983 +:1032F00004BF4CEA0241816218D0846A0CEB144C82 +:103300004C1E18BF4FF4827509D000BF05EB830631 +:1033100086595B1CDBB20CEB164C9C42F6D84FF482 +:10332000807303EB81014CEA0242425070BC0020E2 +:103330007047D0F8B40301F046BFC1EBC10200EB07 +:103340008202D0F8B403526C01F0B0BE2DE9F04710 +:103350000E46074672B6012936D1234C214D402234 +:10336000206805F5177105EB8010FDF7E4FB69781F +:10337000A878042202EB012100EB010860684FF0FD +:1033800000094FF0010A012810D12978284604F0DD +:10339000A1FC00281CBFC4F80490B8F1400F05DD63 +:1033A000A8F101000AEBA010C5F874092068401CC0 +:1033B0002060D5F87409401EC5F87409D5F8740961 +:1033C000002808BFC4E9009AC6EBC60007EB8000DE +:1033D0003146D0F8E821D7F8B40301F0BFFE62B659 +:1033E000BDE8F0874852002044030020D0F8B40321 +:1033F00001F0EBBE10B5044601F07F03C3EBC30040 +:103400000A4611F0800F04EB800014BF00F1380170 +:1034100000F5EE710B70D009487094F88003012814 +:1034200004BF022010BD012084F88003206802F050 +:1034300093FA002084F8800310BD70B504460A4654 +:1034400011F0800F01F07F0014BFC0EBC001C2EB90 +:10345000C20104EB810114BF383101F5EE71002582 +:103460008D700870D009487094F88003012804BF5B +:10347000022070BD012084F88003206802F04DFC1A +:1034800084F88053002070BD01F07F01C1EBC101C1 +:1034900000EB8100B0F8F40180B2704770B50446CB +:1034A0008C4611F0800F01F07F00C0EBC00104EBEF +:1034B000810114BF383101F5EE7108705FEADC1C40 +:1034C00081F801C08A60CB7018BFC8800025022B2C +:1034D00008BF0D7194F88003012804BF022070BD5D +:1034E000012084F88003206802F07AF9284684F8E5 +:1034F000805370BD70B504468C4601F07F00C0EB70 +:10350000C00104EB81010025C1F8E821C1E97C3547 +:1035100081F8DD5181F8DC01206901F5EE710128A7 +:1035200008BF0A6194F88003012804BF022070BD1F +:10353000012084F88003227C20681CF07F0F05D0D6 +:1035400002F050FC84F88053002070BD02F01AFB9A +:10355000F8E770B504460D4611F0800F01F07F00CA +:1035600014BFC0EBC001C5EBC50104EB810114BF62 +:10357000383101F5EE7101228A700870E80948704F +:1035800094F88003012804BF022070BD84F88023D2 +:10359000206802F0F4FB15F07F0F05D1217C04F5C3 +:1035A0006172206802F09AFB002084F8800370BDED +:1035B00070B504468C4601F07F00C0EBC00104EBFF +:1035C000810100254A64C1E91335012381F83930AE +:1035D00001F8380F2069012808BF0A6194F88003B8 +:1035E000012804BF022070BD84F88033227C20684B +:1035F0001CF07F0F06D002F0F5FB00BF84F880536B +:10360000002070BD02F0BEFAF8E700002DE9F04F8F +:103610000568044683B00026284602F054FD0028C1 +:103620001CBF03B0BDE8F08F206802F075FD0028D4 +:1036300004BF03B0BDE8F08F206802F06DFD10F00C +:10364000020F04D02068416901F002014161206845 +:1036500002F062FD10F4002F4FF008084FF0100A3E +:103660004FF0010B4ED0206802F038FD070049D022 +:1036700017F0010F43D0F1B2206802F045FD8146FA +:1036800010F0010F2AD005EB4611C1F808BB2069E4 +:10369000012811D1C6EBC60004EB8000D1F8101B45 +:1036A000D0F8E421C1F31201511AC0F8F411D0F896 +:1036B000E8111144C0F8E811F1B22046FFF746FEC8 +:1036C0002069012802BF002ED4F8F001002805D19E +:1036D00004F561720121206802F000FB19F0080F67 +:1036E00006D0204600F0DDFA05EB4610C0F8088B46 +:1036F00019F0100F1CBF05EB4610C0F808AB761C84 +:103700007F08B5D1206802F007FD10F4802F75D036 +:10371000206802F0DCFC5FEA00094FF000066DD083 +:1037200019F0010F6BD0F1B2206802F0DEFC074601 +:1037300010F0010F28D00121D5F8342801FA06F045 +:1037400022EA0000C5F8340805EB4610C0F8081955 +:103750002069012807D1C6EBC60004EB8000D0E940 +:10376000102111444164F1B22046FFF7E6FD2069C3 +:10377000012802BF002EE06C002805D104F561721B +:103780000121206802F0AAFA17F0080F04D005EB17 +:1037900046110820C1F8080917F0100F04D005EBF6 +:1037A00046111020C1F8080917F0400F04D005EBAE +:1037B00046114020C1F8080917F0020F04D005EBAC +:1037C00046110220C1F8080917F0800F49D020687F +:1037D0000190C6EBC60004EB800000F13808D8E980 +:1037E0000501471AD8F80800874288BF0746F81C29 +:1037F0004FEA900A019800EB461B1DE036E030E0EE +:10380000471AD8F80800B84238BF0746F81C4FEAF4 +:10381000900A207C0090BBB2F2B2D8F80C1001984C +:1038200002F0C4FCD8F80C003844C8F80C00D8F8F2 +:1038300018003844C8F81800DBF8180980B2504561 +:1038400084BFD8E90501884201D90028D8D147B9F9 +:1038500001990120B040D1F8341881430198C0F893 +:103860003418761C5FEA59097FF45AAF206802F0D9 +:1038700053FC10F0004F0DD0D5F8040820F00100E3 +:10388000C5F80408204600F0F2F92068416901F00B +:1038900000414161206802F03FFC10F4006F0CD041 +:1038A000D5F8080810F0010F1CBF204600F016FAEA +:1038B0002068416901F400614161206802F02CFC3C +:1038C00010F4805F5CD0D5F8040820F00100C5F842 +:1038D00004080021206802F0C5FB6068D0B110F038 +:1038E00001004FF0FF021CBFC5F80829C5F8082BDE +:1038F000616881420ED900BF05EB4011C1F808296B +:10390000C1F8082BC1F82829C1F8282B6168801C50 +:103910008142F1D84FF0FF30C5F81808D5F81C08DF +:1039200040F00110C5F81C08206B60B1D5F8840880 +:1039300040F00B00C5F88408D5F8440840F00B00AF +:10394000C5F844080BE0D5F8140840F00B00C5F8A2 +:103950001408D5F8100840F00B00C5F81008D5F889 +:10396000000820F4FE60C5F80008217C04F56172AF +:10397000206802F0B3F92068416901F48051416187 +:10398000206802F0C9FB10F4005F1CD0206801F031 +:103990006FFF2068C16821F47051C160206802F097 +:1039A00075FB60B30320E060402060612068C1685F +:1039B00041F4C051C160204600F048F920684169D7 +:1039C00001F400514161206802F0A6FB10F0100FD5 +:1039D00041D02068816921F010018161D5F82080F3 +:1039E00008F00F00C0EBC00004EB800000F5EE779C +:1039F000C8F3434002280CD006281CD026E0002043 +:103A0000E0604FF4007060612068C16841F41051BB +:103A1000D0E747F6F07018EA000F17D0C8F30A1283 +:103A200090462846F96802F07BFBF8684044F8604D +:103A3000B869404409E0082204F56171284602F0A3 +:103A40006FFBB869C8F30A110844B861206881693E +:103A500041F010018161206802F05EFB10F0080F58 +:103A600007D0204600F007F92068416901F00801FD +:103A70004161206802F050FB10F4801F08D0F1B2C1 +:103A8000204600F03AF82068416901F48011416154 +:103A9000206802F041FB10F4001F08D0F1B220466C +:103AA00000F02FF82068416901F40011416120689D +:103AB00002F032FB10F0804F07D02046FFF739FCB0 +:103AC0002068416901F080414161206802F024FBD7 +:103AD00010F0040F04BF03B0BDE8F08F2068456804 +:103AE00015F0040F1CBF2046FFF780FC20684168DA +:103AF0002943416003B0BDE8F08FD0F8B40301F072 +:103B0000B5BBD0F8B40301F0B3BB002804BF01205B +:103B100070472DE9F04104468AB0032084F8810300 +:103B2000204600F05DF8206802F026F81034B4E872 +:103B3000EF108DE8EF1074E80C01CDE9080194E86E +:103B40000F0001F0AFFE0021206802F006FB00220A +:103B50000F2101251046C2EBC20304EB8303491E6B +:103B600083F8395083F83820DA8783F83B001864EB +:103B70005864D86402F10102EDD14FF48273C1EBB5 +:103B8000C10204EB820203EB810C82F8DD0182F8B2 +:103B9000DC11D18782F8DF01C2F8E401C2F8E80144 +:103BA000C2F8F001226842F80C00491C0F29E6D344 +:103BB00004F1100090E8CF118DE8CF11D4E90C0189 +:103BC000CDE9080194E80F0001F01CFF84F881534F +:103BD000206801F00BFF0AB00020BDE8F081000072 +:103BE00000B5006887B0B0F1A04F1CBF07B000BDA2 +:103BF0004FF4C0500090022001900020029003205A +:103C000003900A20049069460D48FFF78BF90D4890 +:103C1000016841F0800101600B48016841F4804176 +:103C200001600068002200F48040059011464320A6 +:103C3000FFF710FB4320FFF700FB07B000BD0000BB +:103C400000000240343802404438024010B50446B7 +:103C5000C0680121002808BF0021D4F8B40301F096 +:103C60004CFBD4F8B403BDE8104001F014BBD0F80D +:103C7000B40301F02FBBD0F8B40301F031BB10B591 +:103C8000044690F88003012804BF022010BD0120E3 +:103C900084F88003206802F077FA002084F880031B +:103CA00010BDD0F8B42300F56171104601F02FBBB0 +:103CB00010B5044690F88003012804BF022010BD0F +:103CC000012084F88003206801F084FE206802F05F +:103CD000C3F9002084F8800310BD000010B504462D +:103CE000D0F8B40301F050FB2068D0F8001E41F07A +:103CF0000101C0F8001E206A002808BF10BD03485B +:103D0000016841F00601016010BD000010ED00E007 +:103D10002DE9F05F5F4F06468946386801F0FF0ADB +:103D200000F00F00484506D287F800A0386800F080 +:103D30000F00484540D13078574D10F0020F05D0A4 +:103D40002868B16820F0F00008432860307810F04F +:103D5000010F65D070685149012825D0022818BF8D +:103D60000328096825D011F0020F65D0296821F0D9 +:103D7000030108432860FFF7DDF90446706841F24B +:103D80008838012819D0022827D00328286834D081 +:103D900010F00C0F44D000BFFFF7CCF9001B4045DA +:103DA0003AD90320BDE8F09F096811F4003FDDD146 +:103DB00042E011F0007FD9D13EE0286800F00C000D +:103DC00004282DD0FFF7B6F9001B4045E9D8286834 +:103DD00000F00C000428F5D122E0286800F00C0067 +:103DE00008281DD0FFF7A6F9001B4045D9D8286840 +:103DF00000F00C000828F5D112E04FF00C0B3BEA64 +:103E000000000DD0FFF796F9001B4045C9D828687F +:103E10003BEA0000F6D103E0286810F00C0FBBD19C +:103E2000386800F00F00814509D287F800A0386893 +:103E300000F00F00484502D00120BDE8F09F307827 +:103E400010F0040F05D02868F16820F4E050084312 +:103E50002860307810F0080F06D02868316920F407 +:103E6000604040EAC100286000F04EF82968F02266 +:103E700092FAA2F201F0F001B2FA82F2D140084ABD +:103E8000515CC840074908600F20FFF77BF900200C +:103E9000BDE8F09F003C0240083802400038024074 +:103EA00098B200089801002008480949006809688C +:103EB0004FF4E05292FAA2F201F4E051B2FA82F227 +:103EC000D140044A515CC84070470000980100206E +:103ED0000838024098B20008084809490068096893 +:103EE0004FF4604292FAA2F201F46041B2FA82F217 +:103EF000D140044A515CC84070470000980100203E +:103F00000838024098B200082048006810F00C0100 +:103F10001F4808BF7047DFF87CC0042904BF604613 +:103F20007047082918BF704710B41B4B196801F07F +:103F30003F02196811F4800F47F6C0710BD0BCFB2B +:103F4000F2F01A680A4091FAA1F1B1FA81F122FA6D +:103F500001F148430AE0B0FBF2F01A680A4091FA16 +:103F6000A1F1B1FA81F122FA01F1484319684FF445 +:103F7000403292FAA2F201F44031B2FA82F2D14018 +:103F8000491C4900B0FBF1F010BC704708380240F2 +:103F90000024F4000048E801043802402DE9F84FFD +:103FA00004460078CE4FCF4D10F0010F40D0386856 +:103FB00000F00C00042809D0386800F00C00082834 +:103FC0000DD1281D006810F4800F08D0286810F467 +:103FD000003F2DD06068002800F07F8128E0C249B2 +:103FE00020790870606890B1FFF7A4F80646286849 +:103FF00010F4003F1CD100BFFFF79CF8801BC828BD +:1040000000F21581286810F4003FF5D010E0FFF7AA +:1040100091F80646286810F4003F09D0FFF78AF8A7 +:10402000801BC82800F20381286810F4003FF5D1F6 +:104030002078DFF8B88210F0020F4FF0000958D056 +:1040400038684FF0F80A10F00C0F16D0386800F0FE +:104050000C00082804D1A648006810F4800F0CD08A +:10406000E06890B30120C8F80000FFF763F8064647 +:10407000286810F0020F13D01BE0286810F0020F20 +:104080001CBFE068012840F0288128689AFAAAF14C +:1040900020F0F8022069B1FA81F18840104312E063 +:1040A000FFF748F8801B02287ED8286810F0020F1E +:1040B000F6D028689AFAAAF220F0F8012069B2FA3C +:1040C00082F290400843286013E0FFE7C8F80090B0 +:1040D000FFF730F80646286810F0020F09D000BF3D +:1040E000FFF728F8801B02285ED8286810F0020F1E +:1040F000F6D1207810F0080F2ED07E48DFF8F8A116 +:104100006169A1B101210160FFF714F80646DAF8F0 +:10411000000010F0020F1FD1FFF70CF8801B0228DF +:1041200042D8DAF8000010F0020FF5D014E0C0F821 +:104130000090FEF7FFFF0646DAF8000010F0020FCD +:104140000AD000BFFEF7F6FF801B02286FD8DAF80E +:10415000000010F0020FF5D1207810F0040F4FD0BE +:104160006648016841F0805101600068DFF890A165 +:1041700000F080500090DAF8000040F48070CAF837 +:104180000000FEF7D7FF0646DAF8000010F4807F43 +:104190000CD100BFFEF7CEFF801B022847D8DAF80B +:1041A000000010F4807F00E041E0F3D0554E207A0B +:1041B0003070A06841F2883B88B1FEF7BBFF8246B1 +:1041C000306810F0020F1BD1FEF7B4FFA0EB0A001D +:1041D00058452CD8306810F0020FF5D010E0FEF7EB +:1041E000A9FF8246306810F0020F09D0FEF7A2FF47 +:1041F000A0EB0A0058451AD8306810F0020FF5D12C +:10420000A069E8B3396801F00C01082965D00228DB +:10421000C8F860900ED0FEF78DFF0446286810F0B5 +:10422000007F57D0FEF786FF001B02284ED90320DF +:10423000BDE8F88FFEF77EFF0646286810F0007F85 +:1042400009D000BFFEF776FF801B0228EFD8286850 +:1042500010F0007FF6D1D4E90701014347F6C072A0 +:1042600092FAA2F2606AB2FA82F29040A26A4FF029 +:10427000FF3303EB52024FF4403393FAA3F300E011 +:1042800028E0B3FA83F39A40104308434FF070627A +:1042900092FAA2F2E16AB2FA82F291400143144822 +:1042A00001600120C8F86000FEF744FF044628685A +:1042B00010F0007F0ED100BFFEF73CFF001B02286C +:1042C000B5D8286810F0007FF6D003E0286810F019 +:1042D000007FA7D10020BDE8F88F0120BDE8F88F4E +:1042E00008380240003802400238024000004742CD +:1042F00004380240800E4742743802404038024081 +:104300000070004070380240002804BF0120704750 +:1043100070B5044690F85100002520B984F850503B +:10432000204600F037F8022084F851002068016828 +:1043300021F040010160D4E901010843D4E90312EE +:104340001143084361690843218B01F4007108435C +:10435000E1690843216A0843A16A084321680860AB +:10436000A069042101EA1040616A0843216848609D +:10437000A06AB0F5005F02D12168E06A0861206898 +:10438000C16921F40061C1616565012084F85100B3 +:10439000002070BD7047704710B5FFF7FCFF10BDDF +:1043A000002804BF0120704710B5044690F839007A +:1043B00028B9002084F83800204600F00CF80220CC +:1043C00084F83900211D206800F090FB012084F85A +:1043D0003900002010BD70470268012303FA01F183 +:1043E000136A8B431362136A194311620168A1F1C6 +:1043F0008042B2F5803203D14A6C42F400424A64F2 +:104400000068016841F00101016000207047006808 +:1044100081B0016811F0010F04BF016811F0020FB3 +:1044200003D04068009001B07047016811F0040F9C +:1044300004BF016811F0080FF3D101B0704700000C +:1044400070B5016804460868CA684B6910F00F0F20 +:104450004FF0200543D040F2011C13EA0C0F00F08E +:10446000F18010F0010F18BF12F4807F05D0D4F84E +:104470003CC04CF0010CC4F83CC010F0040F18BF55 +:1044800013F0010F05D0D4F83CC04CF0020CC4F876 +:104490003CC010F0020F18BF13F0010F05D0D4F884 +:1044A0003CC04CF0040CC4F83CC010F0080F18BF1E +:1044B00013F0010F03D0E36B43F00803E363E36BF6 +:1044C000002B08BF70BD10F0200F18BF12F0200F96 +:1044D00072D094F83A202046222A44D07CE010F092 +:1044E000200F18BF12F0200F67D094F83A20204612 +:1044F000222A18BF70BD8268B2F5805F1ED00269A3 +:104500005AB3496801F07F02816A4B1C83620A70CA +:10451000C18D491E0904090CC18518BF70BD016811 +:10452000CA6822F49072CA6001684A6922F00102E6 +:104530004A6180F83A5000F0FDF870BD0369826A64 +:104540004968002B14BFC9B2C1F308011180816A08 +:1045500014BF491C891C8162DAE74A68816A4B1CD6 +:1045600083620A70D4E78268B2F5805F0FD0026977 +:10457000E2B1496801F07F02816A4B1C83620A70D4 +:10458000C18D491E0904090CC18525D116E00369B6 +:10459000826A4968002B14BFC9B2C1F308011180B7 +:1045A000816A14BF491C891C8162E9E74A68816AF3 +:1045B0004B1C83620A70E3E70EE043E00168CA68BF +:1045C00022F49072CA6001684A6922F001024A61CD +:1045D00080F83A5000F0AEF820684169E26BC1F310 +:1045E000801102F00802114326D0C16821F49071B5 +:1045F000C1602068416921F00101416184F83A50AD +:104600002068416911F0400F12D0416921F040014A +:104610004161606B60B12D490165606BFEF7DEFBA7 +:10462000002808BF70BD606B016DBDE87040084791 +:104630002046FFF7ECFE70BD2046FFF7E8FE0020A5 +:10464000E06370BD10F0800F18BF12F0800F2CD007 +:1046500094F83900212818BF70BDA068B0F5805FBC +:10466000206A16D0411C2162216800784860E08CE5 +:10467000401E0004000CE08418BF70BD2068C168B3 +:1046800021F08001C1602068C16841F04001C16033 +:1046900070BD0088C0F30800486020690028206AC7 +:1046A00014BF401C801C2062E1E710F0400F14BFD3 +:1046B00012F0400F70BD2046CA6822F04002CA6066 +:1046C00084F8395000F037F870BD0000814B0008C5 +:1046D000002804BF0120704770B5044690F83900E7 +:1046E000002520B984F83850204600F022F8242014 +:1046F00084F839002068C16821F40051C160204667 +:1047000000F046FA2068016921F4904101612068B7 +:10471000416921F02A0141612068C16841F40051DA +:10472000C160E563202084F8390084F83A00002055 +:1047300070BD704770470068016811F0400F1CBFE2 +:104740006FF0400101607047FEE7000010B50022E5 +:104750000849094800F084FC0849074800F038FE81 +:104760000749054800F0CEFBBDE81040024800F0C4 +:1047700043BE000050030020D0090020FC020020AE +:1047800034030020FEE770470148FEF73FBF0000FA +:10479000044C0020704770472DE9F04F394D93B01D +:1047A0000024286840F0805028602868364E00F0C9 +:1047B00080501190306820F4404040F40040306058 +:1047C00030684FF0010800F4404011900520CDE919 +:1047D000008002277805CDE906704FF01009A82067 +:1047E000CDE908904FF0040A0720CDE90AA06846F9 +:1047F000FFF7D4FB4FF00F0B70B9A814CDE90E40B2 +:10480000CDE90CB702210CA81094FFF781FA00281B +:1048100004BF13B0BDE8F08F286840F080502860D6 +:10482000286800F080501190306820F4404040F437 +:1048300000403060306800F4404011900320CDE922 +:104840000004CDE90389CDE90674C020CDF820909D +:10485000CDF82CA0CDE909076846FFF79FFB78B992 +:104860004FF48050CDE90E40CDE90CB702210CA8E1 +:104870001094FFF74DFA002804BF13B0BDE8F08F85 +:10488000FEE70000403802400070004038B50024C8 +:10489000224908283CD2DFE800F0040D161F283B0F +:1048A0003B311F4C086840F001000860086800F0C8 +:1048B00001002BE01B4C086840F00200086008680B +:1048C00000F0020022E0184C086840F00400086084 +:1048D000086800F0040019E0144C086840F0080073 +:1048E0000860086800F0080010E0114C086840F00B +:1048F00010000860086800F0100007E00D4C086820 +:1049000040F080000860086800F08000009002E03D +:1049100009A005F081FA204638BD00003038024079 +:10492000000002400004024000080240000C024067 +:1049300000100240001C024050696E6D61702065DD +:1049400072726F723A2077726F6E6720706F727436 +:10495000206E756D6265722E0000000010B5FEF7C6 +:10496000EFFBBDE81040FFF717BD0000DFF86CC09B +:1049700030B4DCF800001A4B10F00C01194806D0D6 +:104980005C00042908BF046002D008290CD0036031 +:10499000DCF80010144AC1F30311515C026822FADA +:1049A00001F1016030BC704710490A68C2F38055BC +:1049B0000A68002D02F03F0214BFB4FBF2F2B3FB11 +:1049C000F2F20B680968C3F388135A43C1F301413B +:1049D000491C4900B2FBF1F10160D9E708380240F7 +:1049E0000024F4009801002044B20008043802407A +:1049F00030B5314887B0016841F4700101602F483B +:104A0000016841F0010101602D4A00211160026836 +:104A100022F4102222F080720260031D294A1A60DB +:104A2000026822F480220260274801602749580664 +:104A300008602849264808602748016821F00701D6 +:104A40000160016841F001010160FEF781FB23482C +:104A5000016841F0010101600068214D00F0010092 +:104A60000590012000900190029002200390694679 +:104A70002846FEF757FA012211462846FEF754FB56 +:104A8000184C0121491CA142FCDB002201212846CF +:104A9000FEF74AFB0220401CA042FCDBFFF77CFE35 +:104AA0001148016841F008010160016821F0080126 +:104AB000016007B030BD000088ED00E00038024022 +:104AC00008380240103000240C38024008ED00E0A5 +:104AD0000024F400980100200038014030380240E2 +:104AE00000000240A08601002038024070B4026835 +:104AF0001F4BDFF880C0204C204D984218BFB0F10A +:104B0000804F04D060451CBFA042A84203D14E682C +:104B100022F070023243984218BFB0F1804F14D097 +:104B2000604518BFA04210D0A8421CBFA0F1804C25 +:104B3000BCF5A03C09D0A0F1804CBCF5A23C1CBF48 +:104B4000A0F1804CBCF5A43C05D1D1F80CC022F4F6 +:104B500040724CEA020202608A68C2620A6882629B +:104B6000984204BF096901630121416170BC70472B +:104B7000000001400004004000080040000C00401C +:104B800010B5806B0021C185C184FFF740FC10BDCA +:104B90002DE9F041044600680169E26821F44051C2 +:104BA000114301612068C1682369A268D4F81CC060 +:104BB0001A43636921F4037143EA0C0321F414419D +:104BC0001A431143C16020684169A26921F4407110 +:104BD00011434161E2693226B2F5004FBA48BB4940 +:104BE000BB4D22685DD08A4218BF824240F01281DC +:104BF000FFF772F900EBC00101EB0010616889005A +:104C0000B0FBF1F7FFF768F900EBC00101EB001012 +:104C100061688900B0FBF1F0A5FB001040096FF05E +:104C20001801484307EB800006EB0010A5FB0010BD +:104C3000400900F0F007FFF74FF900EBC00101EB6E +:104C4000001061688900B0FBF1F0A5FB001040097D +:104C500007EB0017FFF740F900EBC00101EB001074 +:104C600061688900B0FBF1F8FFF736F900EBC0018D +:104C700001EB001061688900B0FBF1F0A5FB0010AA +:104C800040096FF01801484308EB800006EB001064 +:104C9000A5FB00102168C0F3431038448860BDE8CC +:104CA000F0818A4218BF824259D1FFF715F900EB13 +:104CB000C00101EB001061684900B0FBF1F0A5FBF9 +:104CC000001040090701FFF707F900EBC00101EBF5 +:104CD000001061684900B0FBF1F8FFF7FDF800EB48 +:104CE000C00101EB001061684900B0FBF1F0A5FBC9 +:104CF000001040096FF01801484308EB800006EBF4 +:104D0000C000A5FB0010400900F0F80007EB4007C9 +:104D1000FFF7E2F800EBC00101EB00106168490009 +:104D2000B0FBF1F8FFF7D8F800EBC00101EB001081 +:104D300061684900B0FBF1F0A5FB001040096FF07D +:104D40001801484308EB800006EBC000A5FB0010EB +:104D50002168C0F3421038448860BDE8F081FFF755 +:104D6000A3F800EBC00101EB001061684900B0FB43 +:104D7000F1F0A5FB001040090701FFF795F800EBE3 +:104D8000C00101EB001061684900B0FBF1F8FFF7CA +:104D90008BF800EBC00101EB001061684900B0FB2B +:104DA000F1F0A5FB001040096FF01801484308EB33 +:104DB000800006EBC000A5FB0010400900F0F800E1 +:104DC00007EB4007FFF770F800EBC00101EB0010A4 +:104DD00061684900B0FBF1F8FFF766F800EBC0012D +:104DE00001EB001061684900B0FBF1F0A5FB001079 +:104DF00040096FF01801484308EB800006EBC00043 +:104E0000A5FB00102168C0F3421038448860BDE85B +:104E1000F08100BFFFF748F800EBC00101EB001084 +:104E200061688900B0FBF1F7FFF73EF800EBC001C5 +:104E300001EB001061688900B0FBF1F0A5FB0010E8 +:104E400040096FF01801484307EB800006EB0010A3 +:104E5000A5FB0010400900F0F007FFF725F800EB74 +:104E6000C00101EB001061688900B0FBF1F0A5FB07 +:104E70000010400907EB0017FFF716F800EBC00120 +:104E800001EB001061688900B0FBF1F8FFF70CF846 +:104E900000EBC00101EB001061688900B0FBF1F08C +:104EA000A5FB001040096FF01801484308EB800093 +:104EB00006EB0010A5FB00102168C0F34310384436 +:104EC0008860BDE8F081000000140140001001403E +:104ED0001F85EB5110B5D0F81812002904BF02202D +:104EE00010BD027C002AD1F8042205D04023012104 +:104EF00000F0CAF9002010BD4FF40073012100F04A +:104F0000C3F9F7E70246022000291CBF0020C2F8BF +:104F10001C127047D0F81802C0F804120020704725 +:104F2000D0F81802C0F81022C0F80812002070470C +:104F300010B5D0F81812002904BF022010BDD1F816 +:104F40001422002A1CBF012010BD0122C1F8142226 +:104F5000B1F8102293B2D1F80822812100F01DFA95 +:104F6000002010BD10B5D0F81422526890470020E0 +:104F700010BD134610B50A46002100F085F9002047 +:104F800010BD134610B50A46002100F006FA0020B5 +:104F900010BD10B50323C0F80821C0F8F431C0F8E3 +:104FA0000C2113460A46002100F06EF9002010BDC6 +:104FB00010B505210023C0F8F4111A46194600F077 +:104FC00063F9002010BD10B502238261C0F8F431EE +:104FD000C26113460A46002100F0DFF9002010BD2F +:104FE00010B504210023C0F8F4111A46194600F048 +:104FF000D4F9002010BD000030B40025002804BF03 +:1050000030BC7047034604784FF0000C44B100BF39 +:1050100013F8014F0CF1010C0CF0FF0C002CF7D130 +:10502000022303EB4C0313804B556A1C03238B5460 +:105030000378AA1C002B12BF002330BC704700BFAE +:1050400010F801CB01F802C0521CD2B28B54521C92 +:1050500090F800C0D2B2BCF1000FF1D130BC704763 +:10506000002804BF02207047D0F81432002B1CBF68 +:105070000023C0F81432002918BFC0F8101210B570 +:10508000012180F8FC11027000F0AEF8002010BD84 +:1050900010B5D0F82002FEF7D0F9002010BD10B5F1 +:1050A000D0F82002FEF7A6F9002010BD70B5134617 +:1050B000044659B1D4F814024269002A4CD094F83D +:1050C000FC01032804BF2046904745E0D4F8F411C2 +:1050D000002504F11400022938D1D0E902218A42C6 +:1050E0000DD9511A81608AB219462046FFF749FF4F +:1050F00000231A461946204600F0C6F826E040680C +:10510000B0FBF1F201FB12029AB9884211D3D4F834 +:10511000F81188420DD2002211462046FFF731FFD8 +:1051200000231A4619462046C4F8F85100F0ACF89E +:105130000CE0D4F81402C16829B194F8FC010328EA +:1051400004BF204688472046FFF732FF94F800024C +:10515000012808BF84F80052002070BD70B51546C4 +:10516000044651B1D4F81402826952B394F8FC0198 +:10517000032804BF2046904723E0D4F8F41104F537 +:10518000827003291DD1D0E902C39C450CD9ACEB38 +:1051900003038360C068984298BF03469AB22946C9 +:1051A0002046FFF7E6FE0CE0D4F81402016929B1AD +:1051B00094F8FC01032804BF204688472046FFF7E7 +:1051C0000FFF002070BD0020704710B5012180F84E +:1051D000FC11D0F81422017952689047002010BDCC +:1051E000D0F82002FEF750B910B50178002929D176 +:1051F00015490222C1F8B403C0F820124FF0A040B4 +:105200000860042048600020C1E90320C1E90502CC +:10521000C86108624862C86208630846FEF775FC08 +:10522000002818BF01F05CFA80210748FEF756F805 +:10523000402200210448FEF755F88022012102484F +:10524000FEF750F8002010BD044C002011F0800F34 +:1052500001F07F01D0F82002C1EBC10100EB810019 +:1052600014BF90F83A0090F8DE01704700207047B4 +:105270000020704710B59C461346D0F820026246C5 +:10528000FEF70CF9002010BD10B5D0F82002FEF793 +:1052900031F9002010BD70B50022044640231146AC +:1052A000FFF7E8FF40252B46002280212046C4F866 +:1052B0001051FFF7DFFF0120256284F8FC01D4F8CC +:1052C000180228B1D4F81402217942682046904788 +:1052D000002070BD90F8FD1180F8FC11002070478F +:1052E00010B590F8FC11032905D1D0F81412C96942 +:1052F000002918BF8847002010BD017400207047A6 +:1053000010B5D0F82002FEF7BAFC002010BD10B591 +:10531000044600F5027000F047F80120C4F8F401DB +:10532000B4F80E02C4F8F80194F8080210F01F0156 +:105330000AD001290ED0022912D000F080012046A7 +:1053400000F014F8002010BD04F50271204600F0B2 +:1053500059F8F7E704F50271204600F020FAF1E76A +:1053600004F50271204600F095F9EBE710B5D0F88E +:105370002002FEF7EEF8002010BD10B5D0F8200294 +:10538000FEF796FC002010BD90F8FC1180F8FD118E +:10539000042180F8FC110020704710B5D0F82002DD +:1053A000FEF706F9002010BD0A7802704A784270B4 +:1053B0008A78CB7802EB032242800A794B7902EBA0 +:1053C000032282808A79C97902EB0121C18070476A +:1053D00002460020002914BFC2F8141202207047B0 +:1053E00010B5D0F81422022422B112689047002888 +:1053F00008BF0024204610BD10B5FFF7BEFF0020F7 +:1054000010BD0000F8B50D46497800260A2980F045 +:10541000F180DFE801F0FAF9EFF8EF8505EFE3A49A +:1054200004466888010A082980F0C380DFE801F09B +:10543000C1040C1EC1C1555FD4F81012207C0A684B +:105440006946904701465DE0207C0028D4F81402AC +:1054500005D0C16A684688470146022051E0816A4A +:10546000684688470146022048704BE0C0B20628D3 +:1054700074D2DFE800F0030B131B232BD4F81012B7 +:10548000207C4A686946904701463BE0D4F81012F8 +:10549000207C8A6869469047014633E0D4F81012B0 +:1054A000207CCA686946904701462BE0D4F8101268 +:1054B000207C0A6969469047014623E0D4F810121F +:1054C000207C4A696946904701461BE0D4F81012D7 +:1054D000207C8A696946904707E0207C002868D1D3 +:1054E000D4F81402416B6846884701460AE0207CE4 +:1054F00000285ED1D4F81402016B68468847014643 +:1055000007204870BDF8000000281CBFEA88002A68 +:1055100057D0824288BF0246ADF8002020467AE08C +:105520000446A888002804BFE888002841D1A8784C +:1055300000F07F0594F8FC0103283AD084F8FE516E +:1055400029462046FFF7DCFE2046FFF749FD002DE7 +:105550000CBF0120022084F8FC0132E029E0A97888 +:105560004B4D04460129297023D894F8FC010228E8 +:1055700002D003280ED01CE041B10320616084F802 +:10558000FC012046FFF72CFF022812D02046FFF72F +:1055900027FD16E0B9B160688842F7D0C1B2204655 +:1055A000FFF7E0FC297820466160FFF719FF022829 +:1055B000ECD180212046FFF7D9FE00212046FFF7DD +:1055C000D5FE3046F8BD022084F8FC01204661601B +:1055D000FFF7C8FC2046FFF703FDF2E7E988012941 +:1055E00008D190F8FC11022910D0032904BF012230 +:1055F000011D10D004468021FFF7B8FE002120468F +:10560000FFF7B4FEDDE71BE02AE007E00021816040 +:10561000012200F10801FFF7D6FCD2E790F8FC1157 +:10562000022918BF0329E5D10121C160D0F8041275 +:1056300000291CBF0321C160022200F10C01EAE72E +:105640000446688829460128BBD1C4F80402D4F86E +:1056500014028268204690472046FFF7C1FCB0E75D +:10566000044690F8FC012946022818BF0328A0D15F +:1056700048880128A5D10020C4F80402D4F81402F7 +:105680008268204690472046FFF7AAFC99E7000071 +:105690004C03002070B50D46044628780026097991 +:1056A00000F06000202807D06878002848D0012842 +:1056B00028D0032808D051E0D4F814022946826883 +:1056C00020469047002070BD94F8FC01022802D0CB +:1056D000032805D03AE0002918BF802943D13DE0D6 +:1056E000688828B900291EBF80292046FFF73EFEA2 +:1056F000D4F8140229468268204690472046FFF7D6 +:105700006FFC2BE094F8FC01022802D0032805D09E +:105710001CE0002918BF802925D11FE06888E8B95E +:1057200011F07F0F08D02046FFF7B2FCD4F8140226 +:1057300029468268204690472046FFF751FC0DE03D +:1057400094F8FC0102280BD0032810D080212046B9 +:10575000FFF70CFE00212046FFF708FE304670BD23 +:1057600011F07F0FFAD02046FFF700FEF6E701F0B8 +:105770007F0011F0800F04EB001014BF00F114053E +:1057800000F582752046FFF761FD002818BF012053 +:105790000222286029462046FFF715FCDEE770B597 +:1057A000044690F8FC010D4603280ED12879012803 +:1057B0000BD8D4F81402826820469047E888002865 +:1057C00004BF2046FFF70CFC07E080212046FFF7CE +:1057D000CDFD00212046FFF7C9FD002070BD00006F +:1057E0004B78012291F800C002FA0CF2012BD0F89C +:1057F0001C380CD043EA0242C0F81C280A7800EB9F +:105800004210D0F8002B12F4004F20D02CE092B2BE +:105810001A43C0F81C280A7800EB4210D0F800396F +:1058200013F4004F20D1D0F80039B1F808C0CCF300 +:105830000A0C43EA0C03C978890441EA82511943EE +:1058400041F4004141F08051C0F800190CE0D0F85B +:10585000002B0B89C3F30A031A43C978034B43EAAD +:1058600081411143C0F8001B0020704700800010E8 +:10587000D0F800196FF30A01C0F80019D0F8081821 +:1058800001F00601042905D1D0F8001941F0030107 +:10589000C0F80019D0F8041841F48071C0F8041859 +:1058A000002070472B4ADDF800C0029B0999012BAC +:1058B00005D0C16841F04001C16001232DE0836B38 +:1058C00023F480338363C36823F0400323F4840309 +:1058D000C360C36823F44013C360012903D1C168C6 +:1058E00041F48011C160012102E0491C914228D895 +:1058F000036913F0004FF8D0016941F00101016123 +:10590000012302E05B1C93421BD8016911F0010FD7 +:1059100017D0F7E75B1C934210D8016911F0004FD4 +:10592000F8D0016941F001010161012102E0491C47 +:10593000914203D8036913F0010FF8D14FF480317D +:105940008163BCF1010F03D1816841F020018160C6 +:1059500000207047400D030091F801C001220B7830 +:1059600002FA03F3BCF1010FD0F83CC818D02CEABE +:105970000343C0F83C38D0F81C3891F800C002FA54 +:105980000CF223EA0242C0F81C28097800EB41100F +:10599000D0F8001B21F40041C0F8001B0020704724 +:1059A0009BB22CEA0303C0F83C38D0F81C3891F8BD +:1059B00000C002FA0CF292B223EA0202C0F81C28DC +:1059C000097800EB4110D0F8001921F40041C0F82B +:1059D0000019E3E710B5D0F8041821F00201C0F86F +:1059E00004180320FDF70CFA002010BD10B5D0F804 +:1059F000041841F00201C0F804180320FDF700FA72 +:105A0000002010BD2DE9F003DDE908280D9F069E5A +:105A1000D0F838C04CF4002CC0F838C02FB9D0F8FA +:105A200038C04CF4001CC0F838C04FF0000CC0F86F +:105A300000CED0F80048C0F80048012A0CD0D0F8B9 +:105A4000002842F00302C0F8002800BF4FF484622F +:105A500002610123454A0BE0002BD0F8002818BF53 +:105A600042F00102C0F80028F0E75B1C934203D823 +:105A7000046914F0200FF8D110230361012302E020 +:105A80005B1C934203D8046914F0100FF8D1C0F8DE +:105A900010C8C0F814C84FF0FF32C0F81828C0F87A +:105AA0001CC800224FF09045FF24002912D900BFE6 +:105AB00000EB4213D3F8009919F0004F14BFC3F85C +:105AC0000059C3F800C9C3F810C9C3F80849521CEB +:105AD0009142EDD80022002912D900BF00EB4213F9 +:105AE000D3F8009B19F0004F14BFC3F8005BC3F854 +:105AF00000CBC3F810CBC3F8084B521C9142EDD831 +:105B0000D0F8101821F48071C0F81018012E0CD1B3 +:105B10001749C0F83018D0F8301841F0030141F4AB +:105B20008031C0F83018D0F83018C0F818C06FF0C5 +:105B3000804141611EB9816941F010018161816933 +:105B40000C4A11438161B8F1000F03D0816941F023 +:105B500008018161012F05D1816941F0040141F003 +:105B6000804181610020BDE8F0037047400D0300D3 +:105B70000001800000383C80816821F001018160D3 +:105B80000020704710B491F801C00B7800EB43136C +:105B9000BCF1010F2BD0D3F810CB6FF3120CC3F86C +:105BA00010CB0B7800EB4313D3F810CB6FF3DC4C26 +:105BB000C3F810CB4B69002B1CBF8B684B610B7873 +:105BC00000EB4313D3F810CB4CF4002CC3F810CBEC +:105BD0000B7800EB4313D3F810CB8C68C4F312049A +:105BE0004CEA040CC3F810CB012A6BD164E0D1F865 +:105BF00014C0BCF1000FD3F810C941D06FF3120CE0 +:105C0000C3F810C90B7800EB4313D3F810C96FF336 +:105C1000DC4CC3F810C9D1F814C08B689C4598BF00 +:105C200063464B610B7800EB4313D3F810C94CF477 +:105C3000002CC3F810C90B7800EB4313D3F810C93C +:105C40004C69C4F312044CEA040C00BFC3F810C939 +:105C5000012A2AD04A694AB1D0F834280B784FF08B +:105C6000010C0CFA03F31A43C0F83428097800EB4E +:105C70004110D0F8001941F00441C0F800192AE0A1 +:105C80006FF3DC4CC3F810C90B7800EB4313D3F867 +:105C900010C94CF4002CC3F810C90B7800EB431367 +:105CA000D3F810C96FF3120CD0E70B7800EB431355 +:105CB0000A69C3F81429D9E70B7800EB4313CA68C3 +:105CC000C3F8142B097800EB4110D0F8001B41F009 +:105CD0000441C0F8001B002010BC70470023C0F82E +:105CE000103BD0F8103B43F40023C0F8103BD0F831 +:105CF000103B43F01803C0F8103BD0F8103B43F0C2 +:105D0000C043C0F8103B012905D1C0F8142B4FF057 +:105D10008021C0F8001B002070474B780A7800EB08 +:105D20004212012B0BD0D2F8003B23F40013C2F82F +:105D3000003BCA78032A18BF022A15D01DE0D2F80A +:105D4000003923F40013C2F80039CA78032A18BFB7 +:105D5000022A12D1097800EB4110D0F8001941F065 +:105D60008051C0F8001908E0097800EB4110D0F824 +:105D7000001B41F08051C0F8001B002070474B7899 +:105D80000A7800EB4212012B05D0D2F8003B13F049 +:105D9000004F15D01AE0D2F8003913F0004F05D1AA +:105DA000D2F8003923F08043C2F80039097800EBBB +:105DB0004110D0F8001941F40011C0F800190EE0AC +:105DC000D2F8003B23F08043C2F8003B097800EB97 +:105DD0004110D0F8001B41F40011C0F8001B002056 +:105DE0007047000030B44C786FF0604C0B7800EBDB +:105DF0004313012C32D0D3F8104B6FF31204C3F8C5 +:105E0000104B0B7800EB4313D3F8104B6FF3DC44CB +:105E1000C3F8104B4B69002B7ED08C6823445B1E6B +:105E2000B3FBF4F39BB20C7800EB4414D4F8105B92 +:105E30000CEAC34C45EA0C0CC4F810CB91F800C036 +:105E400000EB4C1CDCF8104B8D686B43C3F3120362 +:105E50002343CCF8103B012A7ED1D7E04C697CB3B8 +:105E6000D3F810496FF31204C3F810490B7800EB14 +:105E70004313D3F810496FF3DC44C3F810494C695D +:105E80008B681C44641EB4FBF3F30CEAC34C0B7820 +:105E900000EB4313D3F810494CEA040CC3F810C9C3 +:105EA0000B7800EB4313D3F810C94C69C4F3120408 +:105EB0004CEA040CC3F810C9CB78012B18D029E0A8 +:105EC000FFE7D3F810C96FF3DC4CC3F810C90B78A7 +:105ED00000EB4313D3F810C94CF4002CC3F810C9DD +:105EE0000B7800EB4313D3F810C96FF3120C0FE0DB +:105EF0000B7800EB4313D3F810C92CF0C04CC3F857 +:105F000010C90B7800EB4313D3F810C94CF0005CB8 +:105F1000C3F810C9012A00E062E021D0CB78012B40 +:105F200026D04B696BB1D0F8343891F800C0012409 +:105F300004FA0CFC43EA0C03C0F83438CB78012B8C +:105F400016D00B7800EB4313D3F800C94CF0044C87 +:105F5000C3F800C9CB7800E05EE0012B68D118E0FF +:105F600091F800C000EB4C1C0B69CCF81439E5E744 +:105F7000D0F8083813F4807F0B7800EB4313D3F884 +:105F800000C90CBF4CF0005C4CF0805CC3F800C949 +:105F9000D7E791F800C0CB68898A89B2FAB9C91CE1 +:105FA0008A0845D012F0010106D053F8045B00EBDB +:105FB0000C3404F58054256091423CBF00EB0C305A +:105FC00000F5805034D200BF53F804CBC0F800C0B5 +:105FD00053F804CBC0F800C0891C9142F4D327E0E9 +:105FE0000B7800EB4313D3F810CB8C68C4F3120486 +:105FF0004CEA040CC3F810CB0B7800EB4313D3F836 +:1060000010CB4CF4002CC3F810CB24E70B7800EB3A +:106010004313CA68C3F8142BCA78012A0BD0097835 +:1060200000EB4110D0F8001B41F00441C0F8001B08 +:10603000002030BC7047D0F8082812F4807F0A781E +:1060400000EB4212D2F8003B14BF43F0805343F000 +:106050000053C2F8003BE2E7816841F00101816032 +:10606000002070470022202343EA81110161064984 +:10607000521C8A4201D903207047036913F0200F94 +:10608000F6D1002070470000400D03000021D0F839 +:10609000082812F0060F14D0D0F8082802F00602E3 +:1060A000022A0DD0D0F80828062333EA020207D0CE +:1060B000D0F8080800F00600042808BF022100E01C +:1060C000032108467047406900F001007047D0F88E +:1060D0001818D0F81C08084080B27047D0F818187B +:1060E000D0F81C080840000C7047D0F81028D0F8F1 +:1060F0003438CB4003F0010342EAC31200EB4110F5 +:10610000D0F808091040704700EB4111D1F8081B86 +:10611000D0F814080840704741698069084070470A +:106120000346D01C820816D012F0010003F58053FC +:1061300003D0D3F800C041F804CB90420BD200BF8B +:10614000D3F800C041F804CBD3F800C041F804CB29 +:10615000801C9042F4D30846704710B5C26822F004 +:10616000C042C260012904BFC16841F0005105D09E +:10617000002904BFC16841F0804100D1C1603220D4 +:10618000FCF73EFE002010BDD0F8002822F4FE628D +:10619000C0F80028D0F800284FF4FE6303EA01118C +:1061A0001143C0F80018002070470000DDF800C05F +:1061B000BCF1000F19D1DB1C5FEA930C15D01CF069 +:1061C000010300EB023000F5805002D051F8042B9F +:1061D0000260634509D200BF51F8042B026051F8F8 +:1061E000042B02609B1C6345F6D300207047FEE73A +:1061F00070B50C460546FCF77FFE084AF321116096 +:1062000002210420FCF744FD0023224629461846BB +:10621000FCF710FEBDE87040FCF702BE0C3C0240EB +:10622000002A18BFB0F5A37F24BF4FF0FF3070479E +:1062300070B50E460D4900EB4000154651F8204060 +:1062400060B2B0F1FF3F07D0094804F0030200211B +:106250000260084803F05CFAC4F307212B4632467B +:10626000044803F009F8002070BD000004B30008E2 +:106270000C040020A05C0020002A18BFB0F5A37F0A +:1062800024BF4FF0FF30704770B50E46114900EB48 +:10629000400001EB8000154604688088C0F30720A9 +:1062A000012804BF4FF0FF3070BD60B2B0F1FF3F76 +:1062B00007D0094804F0030200210260074803F0F8 +:1062C00027FAC4F307212B463246044803F092F81C +:1062D000002070BD04B300080C040020A05C002066 +:1062E00010B5002204490548FEF71AFE0449034888 +:1062F000FEF710FE002010BDFC2B0020D00900206E +:10630000F40B002010B5054803F02AF900221146CD +:10631000024803F0FDF9002010BD0000A05C002041 +:1063200010B1102800D811B94FF0FF3070472DE997 +:10633000F04F89462DED048BD1B080464FF4887123 +:1063400002A8FAF76FFC0026B8F1000F7EDDDFF837 +:1063500058B3F5EE008A9FEDD59A10279FEDD48AA9 +:10636000C6EB061000EB800009EB8004052202A9B1 +:106370000B20FFF755FF9DF80800002869D0102872 +:1063800067D89DF80C5065859DF80BA005F11002AB +:1063900002A90420FFF744FF2A4602A904F12C00B9 +:1063A000FAF70EFC02A9485D20710A2851D2C14AB1 +:1063B000135C1BF80000C04A207394F804C052F824 +:1063C0002020BE4850F82C00104420604819227B41 +:1063D0004179112B00EE101AB94901EB8201B8EE98 +:1063E000400AD1ED000A30EE200A84ED060A18BFFB +:1063F000102B34D0202B00F02581002161716173B6 +:1064000084ED068A84ED078A84ED088A84ED098A82 +:10641000A173216121758379C27990F809C003EBDA +:106420000222037A1B0403EB0C631A44521AA54997 +:1064300089691144A160817AC07A01EB002020852E +:1064400000210B2001F09EF8761C00E001E046459B +:1064500086DB51B03046BDEC048BBDE8F08F0AF00E +:10646000070101293ED0052908BF677137D00729E8 +:1064700014BF00211121617118BF4FF0000E2ED002 +:10648000677390F90210112B00EE101AB8EEC00AD3 +:1064900020EE280A84ED070A90F9031000EE101A86 +:1064A000B8EEC00A20EE280A84ED080A90F904101C +:1064B00000EE101AB8EEC00A20EE280A84ED090A90 +:1064C0000EBF032180498978A17341780909CA1F49 +:1064D000062A78D2DFE802F00B0D0F1113154FF0EA +:1064E000010ECDE7012161714FF0000EC8E70222D5 +:1064F00008E0042206E0082204E0276103E02022ED +:1065000000E0402222614278C2F3420CBCF1010F4C +:1065100008BF012259D0BCF1020F08BF022254D09B +:10652000BCF1030F08BF03224FD0BCF1040F1ABF08 +:1065300000222275042248D0A27B032A47D0022AD7 +:1065400004BF2269402A47D000224D92102B45D02B +:10655000722200925FF00102A1F1060ABAF1060F61 +:1065600064D8002A62D005EB4E05C1EB450ACDF890 +:106570001CA11AF1070F48D04D1CA1F1010A05FA20 +:106580000AF5DDF834A1A1F1040ECAF1040A0AFAF1 +:106590000EFA5544B5FBF2FE479D07EB8C0C05F156 +:1065A000060A4D9D6D4201EB4501BAFBF1F501FB79 +:1065B00015A1491C01FB0CF1B1FBF2F1009A7244E8 +:1065C000114434E0FFE700229CE72275B4E722691A +:1065D000202A18BF402AB7D10122B6E73A4A92785A +:1065E000012A0ED0022A08D0032A0CBF4022002222 +:1065F00000920CBF01220022AEE72022009202226C +:10660000AAE7102200920422A6E701F1010CA1F1F1 +:10661000010A0CFA0AFC4FF0030A091F0AFA01F1F9 +:106620006144B1FBF2FEA901A031C5E70021112BA5 +:106630007FF4F1AE94ED060A30EE490A84ED060AC5 +:10664000E9E600BF0AF0070101292BD0052908BFA0 +:10665000677105D007291ABF00216171112121D06E +:106660002021617384ED078A174984ED088A84ED3F +:10667000098A9FED171ADFED170A4A79A27340EED7 +:10668000010AC9689FED141A00222161227520EECB +:10669000011A0E4AB2FBF1F141EE000A1439C4EDC1 +:1066A000060AB8E66171DBE7D651002000000CC293 +:1066B000000000C3ECB20008A0030020E05100205D +:1066C000A8030020A05C00208803002040600A008E +:1066D000287EC43F00007042A69B443B00207047C8 +:1066E000704770B50546007C0026002830D0402356 +:1066F000022281212846FEF7BDFD4023022201210E +:106700002846FEF7B7FD0823032282212846FEF71C +:10671000B1FD4FF40770F9F715FEC5F8180200280F +:1067200008BF012612D00446D5F81C020068804735 +:106730000020C4F81402C4F81802287CD4F80422FB +:10674000A8B1402301212846FEF79EFD304670BDCA +:106750004FF40073022281212846FEF78BFD4FF48F +:106760000073022201212846FEF784FDCBE74FF497 +:10677000007301212846FEF787FDE7E7F8B5002101 +:106780000698089CC6B2C3F30745C3F307270091D8 +:10679000082E08BF002D1FD0A819082822D8394676 +:1067A000234802F07BFF0121B140491EA9408DF82A +:1067B0000000C9B204FA05F28DF80110D2B2884384 +:1067C0008DF80220114040EA01028DF8032039467D +:1067D000174802F09DFF25E0E2B23946144802F066 +:1067E00097FF1FE005BBFEB1202E1DD8F01DC3088A +:1067F000002B12DD0DF1FF3013F0010F02D000F875 +:10680000014F24125A1008D044704FEA242C00F88B +:1068100002CF4FEA2C24521EF6D16A46394604486C +:1068200002F0E8FD0020F8BD4FF0FF30F8BD000099 +:10683000A05C00200020704710B501460348FEF719 +:1068400069FB0248FEF746FB002010BDD00900207E +:1068500070B50546D0F8186208780C4610F0600153 +:1068600025D020292BD1E288CAB110F0800F6078A2 +:106870000AD0D5F81C128B6831469847E288314619 +:106880002846FEF7A0FB1AE086F80002A07986F8F9 +:106890000102E28831462846FEF77BFB0FE0D5F87F +:1068A0001C12607800228B682146984707E06078C8 +:1068B0000A2804D1012203492846FEF784FB002060 +:1068C00070BD00002002002010B580220021034886 +:1068D00002F01EFF02490020086010BDA05C0020ED +:1068E0000C040020D0F81802002804BF02207047D2 +:1068F0000021C0F814120846704770B50446002500 +:106900008121FEF7CCFB01212046FEF7C8FB822146 +:106910002046FEF7C4FBD4F8180250B1D4F81C028C +:1069200040688047D4F81802F9F73BFD0020C4F80E +:106930001802284670BD38B50446694640F2211059 +:1069400000F0B4FD00281CBF4FF0FF3038BD0098A8 +:106950002060002038BD70B50546D0F81842FEF71B +:106960003FFCC4F80C02D5F81802002804BF02202E +:1069700070BDD4F80402D5F81C12CA6804F503717E +:106980009047002070BD00000A2824BF4FF0FF3060 +:1069900070472DE9F05FDFF8E881DDE90AC112F008 +:1069A000FF0708F114094FF0000E18D0C2F3072AB0 +:1069B000BAF1020F80F0DF800CF0FF05012D08BF57 +:1069C000704E03D0022D14BF6F4E704E704C082DC8 +:1069D00043D2DFE805F0420B0D0F1114171A08F827 +:1069E00000E049F820E00020BDE8F09F694A0EE091 +:1069F000694A0CE022460AE04FF2244207E047F6DB +:106A0000E01204E043F6F04201E041F6786293467A +:106A10000BEBDB7B03EB6B0B06EBD676BBEB660F6E +:106A20007CDCB2F1FF3F08BF224602EBD272741049 +:106A3000A3EB62026442A24270DB584A0226584C21 +:106A400012F800B0574ABBF1100F0AD0BBF1110F7A +:106A500046D0BBF1200F62D08DE04FF0FF32A3464D +:106A6000D6E7002D08BF66F3070C002908BF0821F0 +:106A70000CF0FF0CBCF1030F1CBFBCF1020FBCF10A +:106A8000010F78D1022918BF042907D0082918BF9F +:106A9000102903D0202918BF40296CD108F80070B4 +:106AA000BAF1000F14BF01250025255449F8203004 +:106AB00082F802C001F07E00D070BCF1030F08D054 +:106AC000BCF1020F08BF402907D000BF82F804E0E4 +:106AD0004EE0202918BF4029F8D10120107147E06D +:106AE000002D04BF032262F3070C002908BF7E219A +:106AF0000CF0FF02032A08BF31F07E023BD108F8F8 +:106B00000070BAF1000F14BF012200222254264A5D +:106B100049F8203001F07E01115429E02BE0002DCE +:106B200008BF66F3070C002908BF4FF47A410CF048 +:106B3000FF0CACF10105072D1DD21C4EA1F5FA7515 +:106B4000B54218D208F80070BAF1000F14BF012541 +:106B50000025255449F8203082F805C0D160DDE9D0 +:106B60000E0150EA010303D00C9B1370C2E904012B +:106B70000020BDE8F09F4FF0FF30BDE8F09F00001F +:106B8000CC510020E0C81000481D0E0040420F000C +:106B900048E8010020A1070090D00300ECB20008F3 +:106BA000D651002088030020B00300209DCE0300B2 +:106BB0000FB4022805D29DF81010012918BF022930 +:106BC00003D04FF0FF3004B070470E4B9DF8042007 +:106BD0001A541233029A43F8202003F108029DED63 +:106BE000030A02EB800282ED000AA3F10E021154A7 +:106BF0000599002918BF0121034A1154002004B04F +:106C0000704700008E030020900300200149487067 +:106C1000002070478803002030B490F850104A1EBE +:106C2000102A16D2DFF858C0002200298CF8501024 +:106C300023DD00BF02EB8203C45C032C09D81918C2 +:106C40008D78032D05D1CD780F2D9CBF4D78032D68 +:106C500003D930BC4FF0FF3070470CF80340634459 +:106C60008C789C70CC78DC704C785C7009791971E8 +:106C70009CF85010521C9142DCDC30BC0020704764 +:106C8000B803002010B50621AC2000F07BFC0721E2 +:106C9000AD2000F077FC0721AE2000F073FC172137 +:106CA000A92000F06FFC5521AB2000F06BFC4221C5 +:106CB000AA2000F067FC07219B2000F063FC06215E +:106CC0009C2000F05FFC0321962000F05BFC3D4C13 +:106CD000607840B10321902000F054FC0421912001 +:106CE00000F050FC07E00121902000F04BFC022155 +:106CF000912000F047FC607840B10321CA2000F0E9 +:106D000041FC0421CB2000F03DFC07E00121CA201A +:106D100000F038FC0221CB2000F034FC012180205F +:106D200000F030FC40F6FE71812000F02BFC0721C2 +:106D30007F2000F027FC0121E42000F023FC01214A +:106D4000592000F01FFC0421E32000F01BFC01216E +:106D5000E52000F017FC0121E72000F013FC0221E0 +:106D6000E82000F00FFC0A21EA2000F00BFCFF21D4 +:106D7000EF2000F007FC8021F82000F003FC40F237 +:106D8000DC51B72000F0FEFB0121C42000F0FAFB2B +:106D9000607840B10321B82000F0F4FB0421B92051 +:106DA00000F0F0FB07E00121B82000F0EBFB02212E +:106DB000B92000F0E7FB0221BDE81040F12000F00F +:106DC000E1BB00008803002010B5D0E9864100290E +:106DD0001CBF94F80002FF2807D08B6894F80122AA +:106DE00021469847FF2084F80002002010BD0000D3 +:106DF0004321018000487047740200204321018034 +:106E00000048704730020020122008800048704778 +:106E10007003002010B50A46024903A0FEF7ECF803 +:106E2000004810BDBC4F002043444320436F6E66B2 +:106E30006967000004200880004870476C03002048 +:106E400010B50A46024903A0FEF7D6F8004810BD67 +:106E5000BC4F002033454135463043324238314340 +:106E60000000000010B50A46024903A0FEF7C4F86E +:106E7000004810BDBC4F002053454D5445434820A9 +:106E80005069636F4757205669727475616C20436F +:106E90006F6D506F7274000043210180004870478D +:106EA000B802002010B50A46024903A0FEF7A4F874 +:106EB000004810BDBC4F002043444320496E746518 +:106EC00072666163650000002DE9F84FDFF80CB1D0 +:106ED000B1F100090BF1100682464FF0000406F1F3 +:106EE000100706F1200852DD04F1A0014FF497705D +:106EF00000F048FB012004F049F869464FF48F7018 +:106F000000F0D4FA012004F041F804EB0A050098DF +:106F10000BF8050004F1A8014FF4977000F032FB64 +:106F2000012004F033F869464FF48F7000F0BEFA88 +:106F3000012004F02BF80098705504F1B0014FF4D3 +:106F4000977000F01FFB012004F020F869464FF411 +:106F50008F7000F0ABFA012004F018F80098785513 +:106F600004F1B8014FF4977000F00CFB012004F01D +:106F70000DF869464FF48F7000F098FA012004F084 +:106F800005F80098641C08F80500A145ACDC9BF8E6 +:106F900005008BF80000737933707979397098F8AF +:106FA000052088F800208BF801007370797088F84C +:106FB00001208BF80200B370B97088F802208BF8BA +:106FC0000300F370F97088F803208BF80400337124 +:106FD000397188F80420BDE8F88F000008520020BD +:106FE00010B50A46024903A0FEF706F8004810BD96 +:106FF000BC4F002053544D6963726F656C656374B8 +:10700000726F6E69637300000A2101800048704747 +:10701000240200200FB400202DE9F04FD3B0074622 +:107020009DF87CB14490BBF1020F80F02F82FE48A6 +:1070300010F80B00002800F02982FC4810F80B0023 +:10704000002800F023829DF87481B8F1000F1CBF66 +:10705000B8F1010FB8F1020F40F018829DF87E01DF +:107060009DF886114F904B919DF884619DF87F416A +:10707000BDF88C91102803D0202823D000F006BA48 +:10708000032C1CBF022C012C40F0008260980228C7 +:1070900018BF042808D0082818BF102804D02028BA +:1070A00018BF402840F0F281012E18BF022E04D0F4 +:1070B000032E18BF042E40F0E981B9F1FF0F00F252 +:1070C000E5810EE0481EC82880F0E0816098A0F5B8 +:1070D000FA71D748884240F2D981B9F1FF0F00F226 +:1070E000D581DFF850A39AF85000401E10F0FF053C +:1070F00018BF9DF97D110AD005EB8500504490F929 +:107100000400884203DD681E10F0FF05F4D1CA496F +:10711000AF2000F0CBF9C949B02000F0C7F9C84949 +:10712000B12000F0C3F9C749B32000F0BFF905EB67 +:107130008500C0494E900844BBF1000F90F803A0B1 +:107140001ED0C14810F90A10BB2000F01BFABF483E +:1071500010F90A10BC2000F015FAB6494E98095CE7 +:10716000C12000F00FFABA4809F1100A4FF0100CD4 +:10717000017843F6095001290FD0022919D025E0E2 +:10718000B44810F90A10BB2000F0FCF9B24810F91D +:107190000A10BC2000F0F6F9DFE7B0495C9A5C9B6E +:1071A000B2FBF1F24492B3FBF1F201FB123149025E +:1071B0000AE0AB495C9A5C9BB2FBF1F24492B3FBF0 +:1071C000F1F201FB12310902B1FBF0F74498C3B2AE +:1071D000380A8DF800308DF801008DF80270B8F192 +:1071E000010F10D19F495E988969401AA0F2DC50C6 +:1071F000010E8DF80310010C8DF80410010A8DF8B2 +:1072000005108DF806009DF87C11202000EA411B36 +:10721000BDF88C11DDF83CE1CAB29DF88A710020FE +:10722000BDF88811BEF1100F04D0BEF1200F6ED052 +:1072300000F02CB905F00F054BEA05058DF8075055 +:10724000609D8DF80800102D08BF0A2515D00CDCB4 +:10725000022D08BF072510D0042D08BF08250CD02B +:10726000082D08BF092508D009E0202D08BF0B25EF +:1072700003D0402D08BF0C2501D18DF80950012EF7 +:1072800004BF9DF8095045F0100514D0022E04BF2C +:107290009DF8095045F020050DD0032E04BF9DF840 +:1072A000095045F0300506D0042E04BF9DF8095062 +:1072B00045F0400501D18DF809502FB99DF80950CE +:1072C00045F080058DF809508DF80A20012C08BF83 +:1072D000022208D0022C08BF012204D0032C08BFD0 +:1072E0008DF80B0001E08DF80B209DF88B21012A11 +:1072F00005D19DF80B2042F004028DF80B20032CE1 +:1073000006D0022C04BF609A402A06D00BE039E078 +:10731000609A202A18BF402A05D19DF80B2042F020 +:1073200008028DF80B209DF88521012A05D19DF8D2 +:107330000B2042F010028DF80B20002908BF062117 +:1073400003D0042938BF042101D2ADF8881189B2D5 +:107350000A0A8DF80C208DF80D108DF80E008DF8AE +:107360000F0003F03F008DF80000012C08BF40F033 +:10737000800004D0032C08BF40F040003DD18DF8C0 +:1073800000003AE005F00F0C8DF808004BEA0C0CF9 +:107390004B984CF0100C8DF809008DF807C08DF853 +:1073A0000A20002F14BF0020022040F009008DF8B1 +:1073B0000B00002908BF052003D0032938BF032094 +:1073C00001D2ADF88801BDF888018DF81020010ABE +:1073D0008DF80C108DF80D00234960984FF0110CBA +:1073E000B1FBF0F0010A8DF80E108DF80F0003F0DC +:1073F0007F008DF800000AF1010A0DEB0C004A46EF +:107400000DF5C771F9F797FB002140F2451000F028 +:10741000B9F80021052000F0B5F81FFA8AF2694694 +:107420000620FEF729FF21E0900300208E030020B4 +:107430009DCE0300B8030020BC510020C0510020A5 +:10744000C4510020C851002028520020385200208A +:1074500092030020085200201852002080841E0051 +:1074600000093D00A05C00200048E801B8F1000FD1 +:1074700004BF0121B42010D0B8F1010F04BF0121D5 +:10748000B5200AD0B8F1020F0AD000BF4FF0FF308C +:1074900053B0BDE8F00F5DF814FB00F073F803E0A3 +:1074A0000121B62000F06EF80020F1E72DE9F84345 +:1074B0000F46314900EB400001EB8000D0E9004568 +:1074C00060B2B0F1FF3F07D02C4804F00302002166 +:1074D00002602B4802F01CF900200646C4F307485E +:1074E000EDB2009008EB050008281BD8C4F3072173 +:1074F000234802F0D3F8C5F108018DF80000A1EB94 +:1075000008029040C0B2220E8DF80100012A12BF7D +:10751000C8409DF9010008418DF8020018BFC0B2B3 +:1075200038601EE0B8F1000F1BD1D5B1202D18D85E +:10753000E81D4FEAD008C4F3072143466A461048C5 +:1075400001F09AFEB8F1010058BF694604D40A5C04 +:10755000401E02EB0626FAD5200E012818BF3E6019 +:1075600002D00020BDE8F883C5F1200006FA00F142 +:1075700041FA00F03860F4E704B300080C0400207E +:10758000A05C0020B0F5A37F24BF4FF0FF30704710 +:10759000F0B50C461B4983B010B1012808D00AE0B1 +:1075A00004F003020A600021174802F0B1F826E057 +:1075B00014F0010F23D1154A00EB400002EB8000CC +:1075C000D0E900568768C6F30720012802BF4FF0B4 +:1075D000FF3003B0F0BD68B2B0F1FF3F06D005F058 +:1075E00003020A600021084802F092F80096002287 +:1075F000CDE901742B4611461046FFF7BFF803B0E2 +:107600000020F0BD0C040020A05C002004B30008A2 +:107610002DE9F84F012631461220FFF7B3FF012173 +:107620001320FFF7AFFFF74C04F1080001F06DFCE9 +:10763000E169401AA0611F214D20FFF7A3FF00213F +:107640004C20FFF79FFFF04CAF202168FFF79AFF17 +:10765000B0206168FFF796FFB120A168FFF792FFA5 +:10766000B320E168FFF78EFFFFF70CFBE74C2068C3 +:10767000002800F09882E64D7103B0FBF5F0B1FBF5 +:10768000F0F000EE100AB8EE400ABCEEC00A10EEB0 +:10769000101A3F2988BF3F218C20FFF773FF206815 +:1076A0004FF40041B0FBF5F0B1FBF0F000EE100A32 +:1076B000B8EE400ABCEEC00A10EE101A3F2988BF8F +:1076C0003F21D220FFF75EFFD24D4FF00108691E27 +:1076D000287801280CBF40460020012291F802C002 +:1076E0000023032411F10101BCF1000F11F8027F06 +:1076F00018BF08FA02FC604491F801C0C0B2002F24 +:107700001CBF571C08FA07F73B44921CDBB2641EEF +:10771000EAD1E9791844C0B2012914BF00218021BF +:107720000844DFF8F4A2C7B243F60959DAF80000BA +:10773000400190FBF9F15C20FFF724FFDAF8040028 +:10774000400190FBF9F15D20FFF71CFFDAF808001B +:10775000400190FBF9F15E20FFF714FFDAF80C000E +:10776000400190FBF9F15F20FFF70CFFDAF8100001 +:10777000400190FBF9F16020FFF704FFDAF81400F4 +:10778000400190FBF9F16120FFF7FCFEDAF81800E8 +:10779000400190FBF9F16220FFF7F4FEDAF81C00DB +:1077A000400190FBF9F16320FFF7ECFEAAF114040D +:1077B000DFF86882207801280CBF98F800100021BB +:1077C0006820FFF7DFFE607801280CBF98F80110F1 +:1077D00000216920FFF7D6FEA07801280CBF98F899 +:1077E000021000216A20FFF7CDFEE07801280CBFCF +:1077F00098F8031000216B20FFF7C4FE20790128C0 +:107800000CBF98F8041000216C20FFF7BBFE6079D4 +:1078100001280CBF98F8051000216D20FFF7B2FE7B +:10782000A07901280CBF98F8061000216E20FFF700 +:10783000A9FEE07901280CBF98F8071000216F20FD +:10784000FFF7A0FE60219720FFF79CFE012110208A +:10785000FFF798FEDAF82000400190FBF9F1642070 +:10786000FFF790FE207ADFF8B88101287ED0002152 +:107870000F20FFF787FE00BFDAF82400400190FBDD +:10788000F9F16520FFF77EFE98F80000411EE62022 +:10789000FFF778FE98F80000411EF420FFF772FE13 +:1078A00098F80000C0F10800C200D8E90401F8F718 +:1078B0009FFD89460146ED20FFF764FE4946EE2014 +:1078C000FFF760FE607A01287DD000211120FFF7CC +:1078D00059FEA0200121FFF755FEA2200021FFF74D +:1078E00051FE00210920FFF74DFEA2200121FFF7E4 +:1078F00049FEA1200121FFF745FEA3200021FFF74B +:1079000041FE00210920FFF73DFEA3200121FFF7E2 +:1079100039FE0121A020FFF735FE0121A120FFF74C +:1079200031FE00219D20FFF72DFE00219E20FFF754 +:1079300029FE00219F20FFF725FE00215B20FFF795 +:1079400021FE0021A020FFF71DFE0021A120FFF74E +:1079500019FE20214FF49770FFF714FE69464FF48B +:107960008F70FFF7A3FD0098C0B200E003E0042889 +:1079700040F019817AE0297AD920FFF703FE98F8C0 +:10798000020001280ED0022807D0032840F00B8106 +:107990000021D820FFF7F6FD08E00121D820FFF7ED +:1079A000F1FD03E00221D820FFF7ECFD98F8030079 +:1079B00010281DD008DC02280BD004280ED008287F +:1079C00011D000F0F0B83BE0202816D0402829D094 +:1079D000E9E00721DE20FFF7D5FD27E00821DE20C2 +:1079E000FFF7D0FD22E00921DE20FFF7CBFD1DE0EF +:1079F0000A21DE20FFF7C6FD18E00B21DE20FFF78D +:107A0000C1FD13E0A05C0020BC510020A0030020B9 +:107A100040420F00D6510020E0510020B00300206A +:107A2000880300200C21DE20FFF7ACFD98F804103D +:107A3000DD20FFF7A7FD01210F20FFF7A3FD1BE7C6 +:107A4000697AEB20FFF79EFD5D49D8F80C00B1FB89 +:107A5000F0F1EC20FFF796FD98F80510E220FFF713 +:107A600091FD01211120FFF78DFD32E7202140F229 +:107A70002D10FFF787FD694640F21D10FFF716FD38 +:107A80000098C0B201287DD1642003F08DFA6946C8 +:107A90005020FFF70BFD0098102873D1494C0025AA +:107AA00094F85000002825DD10215B20FFF76AFDC7 +:107AB000304603F079FA05EB85002044817842785E +:107AC0000901C07801EB82110844C1B25B20FFF7C5 +:107AD00059FD304603F068FA69465020FFF7E6FC8E +:107AE000009905F1300081425DD194F850006D1C81 +:107AF000A842D9DCC0B2102814D210215B20FFF7B5 +:107B000041FD304603F050FA11215B20FFF73AFDAA +:107B1000304603F049FA69465020FFF7C7FC009849 +:107B2000302840D110215B20FFF72CFD304603F0B8 +:107B30003BFA03215B20FFF725FD304603F034FAC2 +:107B400069465020FFF7B2FC009833282BD1102152 +:107B50005B20FFF717FD304603F026FA00215B207B +:107B6000FFF710FD304603F01FFA69465020FFF77B +:107B70009DFC0098302816D110215B20FFF702FDF4 +:107B8000304600E00FE003F00FFA39465B20FFF7C4 +:107B9000F9FC304603F008FA69465020FFF786FCEE +:107BA0000098402803D04FF0FF30BDE8F88F002147 +:107BB0004FF49E70FFF7E6FC0020BDE8F88F000050 +:107BC0000048E801B803002070B504464FF417716F +:107BD000F9F728F80021C4F85C12C4F86012C4F860 +:107BE0006412C4F86812C4F86C12C4F87012C4F8B5 +:107BF0007412C4F87812C4F87C12C4F88012C4F865 +:107C00008412C4F88812C4F88C12C4F89012C4F814 +:107C10009412C4F898120125C4F87459C4F8601974 +:107C2000D4F8780904F516620128D4F880090168AF +:107C30004B6813D004F517719847C4F8745900BF06 +:107C4000D4F874090028FBD1C4F8745904F52770DE +:107C5000BDE8704040F2C461F8F7E4BF21469847A0 +:107C6000F4E7000010B5044690F89E0294F89D12C7 +:107C7000042202EB0121084482B2D4F88009016891 +:107C80008B6804F52771984794F87C09012818BF80 +:107C900010BDC82003F07AF9BFF34F8F0548016883 +:107CA000054A01F4E06111430160BFF34F8F00BF4B +:107CB000FDE700000CED00E00400FA0510B5D0F877 +:107CC0008009016809688847BDE810404FF47A7060 +:107CD00003F05CB9A1F161001A2810D2DFE800F0CE +:107CE0000D0D0D0D0F0D0F0D0D0D0F0D0D0D0F0DBC +:107CF0000D0D0D0D0D0F0D0D0D0D01207047002008 +:107D0000704700002DE9F047044600202178ADF5CA +:107D1000AD6D002909BF00208DF810110DF5AD6D76 +:107D2000BDE8F08761391A2930D2DFE801F00D0D86 +:107D30000D0D2F0D2F0D0D0D2F0D0D0D2F0D0D0DEB +:107D40000D0D0D2F0D0D0D0D9DF8101161391A2916 +:107D500080F0E485DFE811F0CF021703A6031204D8 +:107D6000E2055004E205E00320054205E205520564 +:107D7000C005D005E2055B01FA0428006F00BE00D3 +:107D80000D01E205A901F2013B02870200206B21EF +:107D900084F89C1284F89D0284F89E0284F89F0265 +:107DA0000DF5AD6DBDE8F08760788DF81101A37811 +:107DB0004FF0FF368DF8123106EB0020E1781D18E8 +:107DC000002D19DDE01C0DF2131213F0010F04D188 +:107DD00010F8013F8DF81431521C90F801C06B105F +:107DE0000AD000BF10F8025F82F801C090F801C00D +:107DF00002F8025F5B1EF5D19DF811219DF812017A +:107E000006EB0222801804D4221844AB18441279DD +:107E10000271FE4801F042FC722184F89C1200219C +:107E200084F89D12012184F89E1284F89F1284F830 +:107E3000A00200F07EB960788DF81101A3784FF0B0 +:107E4000FF368DF8123106EB0020E1781D18002D69 +:107E500018DDE01C0DF2131213F0010F04D110F81D +:107E6000013F8DF81431521C90F801C06B1009D0FD +:107E700010F8025F82F801C090F801C002F8025FBA +:107E80005B1EF5D19DF811219DF8120106EB02222F +:107E9000801804D4221844AB1844127902719DF85A +:107EA00015019DF8142100EB0223732084F89C0235 +:107EB0009DF8140184F89D029DF8150184F89E0236 +:107EC000012084F89F0204F52872D04801F044FA9A +:107ED00000F02FB960788DF81101A3784FF0FF36CC +:107EE0008DF8123106EB0020E1781D18002D19DD08 +:107EF000E21C0DF2131013F0010F04D112F8013F30 +:107F00008DF81431401C92F801C06B100AD000BFEC +:107F100012F8025F80F801C092F801C000F8025F19 +:107F20005B1EF5D19DF811219DF8120106EB02228E +:107F3000801804D4221844AB1844127902719DF8B9 +:107F400015019DF8142100EB0223742084F89C0293 +:107F50009DF8140184F89D029DF8150184F89E0295 +:107F6000012084F89F0204F52872A84801F02AFA3B +:107F7000DFE060788DF81101A3784FF0FF368DF8BF +:107F8000123106EB0020E1781D18002D18DDE01CF1 +:107F90000DF2131213F0010F04D110F8013F8DF808 +:107FA0001431521C90F801C06B1009D010F8025F18 +:107FB00082F801C090F801C002F8025F5B1EF5D1A3 +:107FC0009DF811219DF8120106EB0222801804D4BD +:107FD000221844AB1844127902719DF815019DF8DE +:107FE000142100EB0223752084F89C029DF81401F3 +:107FF00084F89D029DF8150184F89E02012084F802 +:108000009F0204F52872814801F07CF991E06078C4 +:108010008DF81101A3784FF0FF368DF8123106EB81 +:108020000020E1781D18002D18DDE01C0DF2131260 +:1080300013F0010F04D110F8013F8DF81431521CD8 +:1080400090F801C06B1009D010F8025F82F801C0EF +:1080500090F801C002F8025F5B1EF5D19DF8112176 +:108060009DF8120106EB0222801804D4221844ABBA +:108070001844127902719DF815019DF8142100EB46 +:108080000223702084F89C029DF8140184F89D025C +:108090009DF8150184F89E02012084F89F0204F5E2 +:1080A00028725A4801F0E8F843E060788DF8110131 +:1080B000A3784FF0FF368DF8123106EB0020E178FF +:1080C0001D18002D18DDE01C0DF2131213F0010F26 +:1080D00004D110F8013F8DF81431521C90F801C002 +:1080E0006B1009D010F8025F82F801C090F801C04F +:1080F00002F8025F5B1EF5D19DF811219DF8120177 +:1081000006EB0222801804D4221844AB18441279DA +:1081100002719DF814213D4801F0FAFA772084F8A5 +:108120009C02002084F89D0284F89E02012084F8BD +:108130009F020DF5AD6D0120BDE8F08760788DF8E8 +:10814000110194F802C04FF0FF370CEB00238DF8BB +:1081500012C107EB0020E1780CEB0006002E18DDC1 +:10816000E01C0DF213121CF0010F04D110F801CF26 +:108170008DF814C1521C45785FEA660C09D000BF27 +:1081800010F8026F5570457802F8026FBCF1010CCF +:10819000F6D19DF811219DF8120107EB02228018FB +:1081A00005D422180DF5887C60441279027145AA25 +:1081B000164801F08DF9782084F89C02002084F89C +:1081C0009D0284F89E02012084F89F02B1E7607846 +:1081D0008DF8110194F802C04FF0FF370CEB00232B +:1081E0008DF812C107EB0020E1780CEB0006002EA1 +:1081F0001BDDE01C0DF213121CF0010F04D110F86E +:1082000001CF8DF814C1521C457801E0A05C00201C +:108210005FEA660C09D000BF10F8026F5570457810 +:1082200002F8026FBCF1010CF6D19DF811219DF806 +:10823000120107EB0222801805D422180DF5887C64 +:1082400060441279027145AAFE4801F075F979205F +:1082500084F89C02002084F89D0284F89E0201208C +:1082600084F89F0265E760788DF8110194F802C0E8 +:108270004FF0FF370CEB00238DF812C107EB002005 +:10828000E1780CEB0006002E17DDE01C0DF2131256 +:108290001CF0010F04D110F801CF8DF814C1521C4D +:1082A00045785FEA660C08D010F8026F5570457883 +:1082B00002F8026FBCF1010CF6D19DF811219DF876 +:1082C000120107EB0222801805D422180DF5887CD4 +:1082D00060441279027145AADA4801F0D1F87A2097 +:1082E00084F89C02002084F89D0284F89E020120FC +:1082F00084F89F021DE760788DF8110194F802C0A0 +:108300004FF0FF370CEB00238DF812C107EB002074 +:10831000E1780CEB0006002E17DDE01C0DF21312C5 +:108320001CF0010F04D110F801CF8DF814C1521CBC +:1083300045785FEA660C08D010F8026F55704578F2 +:1083400002F8026FBCF1010CF6D19DF811219DF8E5 +:10835000120107EB0222801805D422180DF5887C43 +:1083600060441279027145AAB64801F043F86120D1 +:1083700084F89C02002084F89D0284F89E0201206B +:1083800084F89F02D5E6607800268DF81101A27866 +:10839000771E07EB002002EB000C4FF49679354670 +:1083A0008DF81221BCF1000F16DDE01C0DF2131147 +:1083B00012F0010F04D110F8012F8DF81421491C7F +:1083C00043785FEA6C0207D010F802CF4B70437815 +:1083D00001F802CF521EF7D19DF811119DF812013C +:1083E00007EB0121401804D4211844AA104409794C +:1083F00001719DF814019449FDF792FFB0F1000C52 +:108400004FF0620084F89C024FF0010101EBEC7028 +:1084100084F89F0284F8A0C24FF00007C4BFDFF8C1 +:108420002882A9F5807236DDC7EB071000EB8000CB +:1084300008EB8001488D8318002B28DD0023504075 +:1084400010F0010005D005EB04090B7889F8A13282 +:108450000123B1F82A909144814515DD05EB030A0B +:1084600011F80390A2445B1C8AF8A19205EB030A61 +:10847000A24411F803908AF8A192B1F82A90801CC6 +:1084800091445B1C8145E9DC488D304486187F1C93 +:108490003546BC45C8DC701C010A84F89D1284F87E +:1084A0009E0246E660788DF81101A2788DF81221BF +:1084B00094F803C012EB002019D0E01C0DF28F31AC +:1084C00012F0010F03D010F8012F01F8012F9DF8D1 +:1084D00012219DF8113102EB0322520807D0437894 +:1084E0004B7010F8023F01F8023F521EF7D1DDE950 +:1084F000E701CDE90001DDE9E4126046E69BFEF705 +:1085000057FB632184F89C12002184F89D1284F8A3 +:108510009E1200286FD017E160788DF81101A278C3 +:108520008DF8122112EB002019D0E01C0DF2C7418A +:1085300012F0010F03D010F8012F01F8012F9DF860 +:1085400012219DF8113102EB0322520807D0437823 +:108550004B7010F8023F01F8023F521EF7D10DF5A3 +:108560009960FEF759FB682184F89C12002184F879 +:108570009D1284F89E1200283DD0E5E060788DF8C9 +:108580001101A2788DF8122194F803C012EB00209B +:1085900019D0E01C0DF26F3112F0010F03D010F86A +:1085A000012F01F8012F9DF812219DF8113102EBE6 +:1085B0000322520807D043784B7010F8023F01F8AD +:1085C000023F521EF7D1DEAF97E86F008DE86F00D3 +:1085D000DDE9DC236046FEF7D7F9642184F89C12BC +:1085E000002184F89D1284F89E12002803D0ABE08D +:1085F00084F89F029DE5A5E00DF5AA6000F09BFCC4 +:1086000060788DF81101A2788DF8122112EB00200C +:108610001ED0E01C0DF2A73112F0010F03D010F8AC +:10862000012F01F8012F9DF812219DF8113102EB65 +:10863000032252080CD043784B7010F8023F01F827 +:10864000023F03E0A05C00208C5D0020521EF2D1AE +:10865000B94DB5F90000B0F1FF3F04D13422B7A104 +:10866000C6A001F0E9FEA888E96800040860C94DC9 +:1086700001266E712E714FF48872EEA96846F8F7E4 +:108680009FFAEAAF97E80F00FEF7C4FC0DF5AC6166 +:10869000BD20FEF70BFFDDF8600501281BD00DF5AE +:1086A000AA6000F014FC0DF5AA6000F01EFCBA4EA2 +:1086B000287938B10DF5AA6000F0D0FB10EE100A51 +:1086C000B042F5DB0DF5AA6000F0E8FB95F820005C +:1086D00001281BD10AE0662084F89C02002084F85F +:1086E0009D0284F89E0284F89F6222E50DF24C50B0 +:1086F000FEF721F905F1080000F007FCDDF84C1544 +:10870000401A3C30E861002085F82000A14801F0C3 +:108710003DF8894DB5F90000B0F1FF3F04D1342296 +:1087200086A196A001F088FEE96868680860FEF7F7 +:108730006FFF662184F89C12002184F89D1284F852 +:108740009E1208B9012053E7002051E7DBA8FEF78D +:10875000F2F801008F48DB9A806910444FF07102F3 +:10876000DB9084F89C224FF0000284F89D224FF0A9 +:10877000040284F89E220CBF0121002184F89F127C +:10878000010E84F8A012010C84F8A112010A84F8E9 +:10879000A21284F8A302CCE461788DF81111A278BA +:1087A0008DF8122102EB0122002AC8BF0DF264539A +:1087B00005DD211809791954401C8242F9DCDDF8E5 +:1087C0006405FEF723FA692184F89C12002184F8DD +:1087D0009D1284F89E120028B6D1B3E76179207902 +:1087E000FEF772FB6A2084F89C02002084F89D0248 +:1087F00084F89E02012084F89F029AE460788DF844 +:108800001101A2784FF0FF3505EB002C02EB0C00B4 +:108810008DF81221002817DDE01C0DF2131112F063 +:10882000010F04D110F8013F8DF81431491C437831 +:108830006244521008D000BF10F802CF4B7043784A +:1088400001F802CF521EF7D19DF811119DF81201C7 +:1088500005EB0121401804D4211844AA10440979D9 +:108860000171E0792179A27900EB01606179090455 +:1088700001EB022101446C2084F89C02002084F862 +:108880009D02082284F89E22A1F18572921F08BFE2 +:10889000012084F89F024148007884F8A0024048F3 +:1088A000007884F8A1023F48007884F8A2023E488C +:1088B000007884F8A3023D48007884F8A4023C487C +:1088C000007884F8A5023B48007884F8A6023A486C +:1088D000007884F8A7022CE4FDF7F6FF6D2084F8F9 +:1088E0009C02002084F89D0284F89E02012084F8F6 +:1088F0009F0284F87C091CE410213048FDF778FCC5 +:108900006E2084F89C02002084F89D0284F89E0268 +:10891000012084F89F0284F87C090AE46B2084F823 +:108920009C02002084F89D0284F89E0284F89F0235 +:108930000DF5AD6DBDE8F0877C5D00206D6265646E +:108940002D6465762F746172676574732F68616C2E +:108950002F5441524745545F53544D2F5441524771 +:1089600045545F53544D333246342F6770696F5FFF +:108970006F626A6563742E68000000006F626A2D82 +:108980003E70696E20213D202850696E4E616D65F4 +:10899000294E4300A05C002000002041187AFF1FF0 +:1089A000197AFF1F1A7AFF1F1B7AFF1F107AFF1F09 +:1089B000117AFF1F127AFF1F137AFF1F00100108A0 +:1089C00070B50025044680F87C59042000F076FF3D +:1089D00008B104490160C4F87859C4F880092046F8 +:1089E00070BD00005CC3000870B504460068416AB1 +:1089F00020468847206801220021036920469847C5 +:108A00000546B0F1FF3F206811D002220369002122 +:108A100020469847064620680022294603692046DA +:108A200098472068816A20468847304670BD816A31 +:108A3000204688474FF0FF3070BD704770470000F8 +:108A400070B50546174C164828602068002804BFFA +:108A5000201D2060261DB04204D056221249134822 +:108A600001F0EAFC00211248D4F8003010228C46B4 +:108A700050F82140AC4208BF40F821C0491C521EAA +:108A8000F6D10849002B12BF0868081D0860B042E3 +:108A900004D056220449054801F0CEFC284670BD9A +:108AA0007CC300080C0200200CC50008F8C40008B4 +:108AB0009009002010B50C46483002F039F82046E5 +:108AC00010BD00EB011000F19401D0F8A020002AA5 +:108AD00008BF70478868104770B50446483001F0F9 +:108AE00079FF236C054600F47C52002B18BF002A46 +:108AF00003D004F13401E06B9847236B05F0FC02CE +:108B0000002B14BF002A70BD04F12401E06ABDE807 +:108B10007040184770B50E46044620491E48154659 +:108B20002060D1E902230021A260E3601C4A226197 +:108B3000A161646104F10801E1611A492162BFF396 +:108B40006F8FBFF34F8F00216162216361632164E6 +:108B500084F8441084F845104C2104F14800F8F7DB +:108B600061F802231022104904F1940000F0F2FE93 +:108B7000A0F194044FF41650C4F8B4002A463146CC +:108B800004F1480001F042FE2246084904F1480081 +:108B900001F014FF204670BDB0C30008DCB200082D +:108BA0009FE8078059B000083D2C0008C38A0008E0 +:108BB000002908BF704701290AD0022918BF704751 +:108BC00000F13401026C002A08BF70478868104722 +:108BD000026B00F12401002AF8D1704770B50D46F0 +:108BE000044601F08BF8E868002804F134000DD049 +:108BF000A9688160D5E90012C0E90012E968C16086 +:108C000001220221203801F0FBFA08E00021016076 +:108C1000C1600A46022104F1140001F0F1FABDE836 +:108C2000704001F0BFB8000070B504460D48002246 +:108C3000C4E90002A260E26022616261A261E261B5 +:108C4000226262622263626322640D462346064A00 +:108C500004F1140001F032FA2946201D01F05DF9FB +:108C6000204670BDC8C30008B18B000810B504468B +:108C70000348206004F1140001F0FAF9204610BD09 +:108C8000C8C300080021F7F7A5BE00000748016827 +:108C9000002904BF011D0160001D814208BF70470B +:108CA00056220349034801F0C7BB00001802002008 +:108CB0000CC50008F8C4000870B5044600680E46EC +:108CC00041682046884720684168204688470F4D04 +:108CD0002868A0420AD0D4E90A120023201D01F01E +:108CE00039FF201D216B01F069FF2C60206881682D +:108CF000204688473146201D02F086F80546206848 +:108D0000816820468847284670BD00001402002074 +:108D100070B5044600680D461646416820468847EF +:108D2000C4E90A560F4D002028602068416820469B +:108D300088472868A0420AD0D4E90A120023201DDF +:108D400001F008FF201D216B01F038FF2C60206826 +:108D5000816820468847206881682046BDE87040C9 +:108D6000084700001402002007480168002904BFDA +:108D7000011D0160001D814208BF70475622034952 +:108D8000034801F059BB0000180200200CC5000880 +:108D9000F8C4000870B5044600680D4641682046D6 +:108DA000884725630F4D00202860206841682046D1 +:108DB00088472868A0420AD0D4E90A120023201D5F +:108DC00001F0C8FE201D216B01F0F8FE2C60206828 +:108DD000816820468847206881682046BDE8704049 +:108DE000084700001402002038B504461848DDF892 +:108DF00010C0206000206060A060E06020616061C1 +:108E0000A061E06108252062C4E90905E06211481B +:108E10002063201DCDF800C001F02CFF20684168C0 +:108E2000204688470C4D2868A0420AD0D4E90A128F +:108E30000023201D01F08EFE201D216B01F0BEFEDF +:108E40002C602068816820468847204638BD000095 +:108E5000D8C3000840420F001402002070B5044639 +:108E600000F04CFF00F04AFF2068002520B1E068C8 +:108E700002F009F86168451A00F094FFA0682C1808 +:108E800000F090FF00EE104A9FED031AF8EEC00AC2 +:108E900080EE810A70BD00000024744970B504465C +:108EA00000F02CFF00F02AFF2068002520B1E068C8 +:108EB00001F0E9FF6168451A00F074FFA0682844DA +:108EC000A06000202060BDE8704000F06BBF10B5CE +:108ED000044600F013FFE06801F0D5FF6060002059 +:108EE000A060BDE8104000F05DBF10B5044600F082 +:108EF00005FF206828B9E06801F0C5FF6060012027 +:108F00002060BDE8104000F04DBF70B5044600F091 +:108F1000F5FE00F0F3FE2068002520B1E06801F0C6 +:108F2000B2FF6168451A00F03DFFA0682C1800F000 +:108F300039FF204670BD70B50025056045600446C8 +:108F4000856000F083FFE06000F0D8FEE06801F08B +:108F50009AFFC4E9010500F025FF204670BD00001E +:108F600010B51C46FFF7D6FD2146B83000F046F894 +:108F7000044940F8B81D5C31C0F8BC103C39C0F859 +:108F8000B81010BDF4C3000810B5074940F8BC1B69 +:108F90005C3140F804193C39016000F04FF8034996 +:108FA00040F8B81D10BD0000F4C30008B0C30008AD +:108FB0000020704700207047002070472DE9F041E5 +:108FC000054600680F460C468E18416A28468847B9 +:108FD000B4420AD0286814F8011BC26A2846904798 +:108FE000B0F1FF3F18BFB442F4D12868816A284627 +:108FF0008847E01BBDE8F0810020704710B584B0C1 +:1090000000F0A8F804460A4820603C306060002068 +:109010006061224607A16846F7F710FA06A1684684 +:10902000F7F7B1FC6061FFF72DFE04B0204610BDDC +:1090300060C400083A257000772B000010B5044684 +:10904000054820603C3060606069F7F7CDFC204641 +:10905000BDE8104000F090B860C40008007B704785 +:1090600070B506460D46154801F0D6FF1448046851 +:10907000F4B1A068C8B12A463146F7F711FDA0B98E +:10908000A068F7F7EEFCA8420FD10C480168002950 +:1090900004BF011D0160001D814204D05622094910 +:1090A000094801F0C9F9204670BD6468002CE0D180 +:1090B000024801F0B1FF002070BD0000F401002063 +:1090C000F00100200CC50008F8C4000870B5044683 +:1090D0000B480026A160C4E900060D46227309482A +:1090E00001F09AFF002D08BF666003D006480168B2 +:1090F00061600460034801F08FFF204670BD0000EE +:10910000ACC40008F4010020F001002010B50446B2 +:109110000D4820600D4801F07FFFA06878B10C4930 +:109120000868A04204BF6068086008D04168A14296 +:1091300003D008464968A142FBD1616841600348F9 +:1091400001F06AFF204610BDACC40008F401002005 +:10915000F001002010B5064A40F8042B0022FFF76A +:10916000B5FF044940F8041D3431416010BD0000D2 +:109170007CC30008BCC4000810B5001DFFF7C6FF83 +:10918000BDE81040001FFFF75BBC10B50446406807 +:1091900028B1FFF763FF012804BF606810BD0020FD +:1091A00010BD10B50446406810B1FFF757FF08B175 +:1091B000002010BD6068002818BF001F10BD406867 +:1091C000002818BF0120704710B54068002808BF6C +:1091D00010BDFFF743FF00280CBF0120002010BD89 +:1091E0000068704710B50446002020606060087871 +:1091F0002F280DD1487858B14B1C002123602268DC +:1092000010782F2806D038B1501C491C2060F6E792 +:10921000204610BD501C20601846FFF721FF6060FB +:10922000204610BD084882B0016841F0800101600D +:109230000648016841F480410160006800F4804004 +:10924000009002B0FBF782BA343802404438024042 +:1092500008461146F9F7F8BC70B514460D4612F0F1 +:109260003F0F04BF501C84B221462846F9F7F8FC92 +:109270000028F9D170BD00002DE9F0471E461746C1 +:10928000894604464FF0000872B600F12405B0F993 +:109290002400B0F1FF3F05D11949342201F140000B +:1092A00001F0CAF8A888E968000408600A2001F003 +:1092B0007BFE09F07F0104F14400FFF7FDFC00256F +:1092C000002E08DD002104F14400FFF7F5FC78557D +:1092D0006D1CAE42F6DC012001F066FE34F9240F6D +:1092E000B0F1FF3F05D10649342201F1400001F001 +:1092F000A3F8E1686068086062B64046BDE8F087A0 +:10930000DC9700082DE9F0411E1E174604464FF079 +:10931000000872B6454608DD002104F14400FFF75D +:10932000CBFC78556D1CAE42F6DC012001F03CFE12 +:1093300034F9240FB0F1FF3F05D10649342201F181 +:10934000400001F079F8E1686068086062B6404664 +:10935000BDE8F081DC9700082DE9F0471E4617466E +:10936000894604464FF0000872B600F12405B0F9B2 +:109370002400B0F1FF3F05D11149342201F1400032 +:1093800001F05AF8A888E96800040860012001F09B +:109390000BFE09F07F0104F14400FFF78DFC00256E +:1093A000002E08DD002104F14400FFF785FC78550C +:1093B0006D1CAE42F6DC62B64046BDE8F0870000A8 +:1093C000DC9700082DE9F0411D1E164607464FF0B8 +:1093D000000872B6444608DD002107F14400FFF79B +:1093E0006BFC3055641CA542F6DC62B64046BDE815 +:1093F000F08100002DE9F0471F469046894604465B +:10940000002572B600F12406B0F92400B0F1FF3F48 +:1094100005D11A49342201F1400001F00DF8B0885D +:10942000F16800040860012001F0BEFD09F07F0032 +:1094300040F0800104F14400FFF73EFC002F08DDFE +:1094400018F8051004F14400FFF736FC6D1CAF421C +:10945000F6DC012001F0A8FD34F9240FB0F1FF3F44 +:1094600005D10649342201F1400000F0E5FFE16832 +:109470006068086062B6BDE8F0870000DC9700080D +:109480002DE9F0411E1E174604464FF0000572B646 +:1094900007DD795D04F14400FFF70EFC6D1CAE4260 +:1094A000F7DC012001F080FD34F9240FB0F1FF3F1B +:1094B00005D10649342201F1400000F0BDFFE1680A +:1094C0006068086062B6BDE8F0810000DC970008C3 +:1094D0002DE9F0471F46904689460446002572B69E +:1094E00000F12406B0F92400B0F1FF3F05D1114985 +:1094F000342201F1400000F09FFFB088F1680004C1 +:109500000860012001F050FD09F07F0040F080016B +:1095100004F14400FFF7D0FB002F08DD18F8051018 +:1095200004F14400FFF7C8FB6D1CAF42F6DC62B6E5 +:10953000BDE8F087DC9700082DE9F0411D1E1646B6 +:1095400007464FF0000472B607DD315D07F14400B5 +:10955000FFF7B2FB641CA542F7DC62B6BDE8F08100 +:10956000F0B5444D044685B0B5F90000B0F1FF3FB9 +:1095700005D14149342201F1400000F05DFFE96866 +:10958000686808603D4DB5F90000B0F1FF3F05D1B6 +:109590003949342201F1400000F04EFFE968686863 +:1095A0000860B4F9340004F13405B0F1FF3F05D18F +:1095B0003149342201F1400000F03EFFE96868685B +:1095C00008600A2001F0F0FCB4F9340004F134051D +:1095D000B0F1FF3F05D12849342201F1400000F0ED +:1095E0002BFFA888E968000408600A2001F0DCFC71 +:1095F000B4F9240004F12405B0F1FF3F05D11E4960 +:10960000342201F1400000F017FFE9686868086043 +:109610000A2001F0BBFC0022082104F14400FFF7FE +:1096200077FB174904F14400FFF7B4FB154804F138 +:109630007807D0E9005600F061FB1348CDE90056E9 +:10964000CDE9024069463846FFF7C8FA00F0AAFBA8 +:10965000012084F8200000206071A06104F108005E +:10966000FFF735FC04F10800FFF73FFC05B00120CF +:10967000F0BD00005C5D0020DC9700087C5D0020F0 +:1096800000127A004CC2000845B0000872B6417959 +:10969000012904BF0021017162B6704770B50E4602 +:1096A000044672B600F12405B0F92400B0F1FF3F82 +:1096B00005D11649342201F1400000F0BDFEA88812 +:1096C000E96800040860012001F06EFC06F07F01EB +:1096D00004F14400FFF7F0FA002104F14400FFF721 +:1096E000EBFAC5B2012001F05FFC34F9240FB0F1B0 +:1096F000FF3F05D10549342201F1400000F09CFEF6 +:10970000E1686068086062B6284670BDDC970008B2 +:109710002DE9F04117460E46044672B600F12405C5 +:10972000B0F92400B0F1FF3F05D11749342201F10F +:10973000400000F081FEA888E9680004086001206C +:1097400001F032FC06F07F0040F0800104F144009B +:10975000FFF7B2FA394604F14400FFF7ADFA0120F1 +:1097600001F022FC34F9240FB0F1FF3F05D1064986 +:10977000342201F1400000F05FFEE168606808609B +:1097800062B6BDE8F0810000DC97000870B50446C1 +:1097900000F13405B0F93400B0F1FF3F04D13422B8 +:1097A0000EA11EA000F048FEE968686808600A2063 +:1097B00001F0FAFB34F9340FB0F1FF3F04D1342249 +:1097C00006A116A000F038FEA088E1680004086039 +:1097D000BDE870400A2001F0E7BB00006D626564DF +:1097E0002D6465762F746172676574732F68616C80 +:1097F0002F5441524745545F53544D2F54415247C3 +:1098000045545F53544D333246342F6770696F5F50 +:109810006F626A6563742E68000000006F626A2DD3 +:109820003E70696E20213D202850696E4E616D6545 +:10983000294E43002DE9F84F0E46DDE90A5A164934 +:10984000DDF830B09846914640F8081BFFF773FBEF +:10985000A0F10804002740F81C7F3146476087606C +:10986000C76000F06FFB6763A763E76304F1340030 +:109870005946276400F066FB781E00902B4642464E +:10988000494604F14400FFF7AFFA51463430FFF780 +:10989000CBF97838BDE8F88F70C3000810B50349DC +:1098A00040F8781BFFF7E2F9783810BD70C3000864 +:1098B0007047B838FFF7FEB87047000010B5F6F7EC +:1098C00041FD040004BF02A000F0A6FA204610BD2E +:1098D0004F70657261746F72206E6577206F75745A +:1098E000206F66206D656D6F72790D0A00000000B3 +:1098F00003B401984100009850EAC12018BF042029 +:109900004A0D18BF40F0010040F2FF72B2EB515F08 +:1099100008BF40F00200012808BF052002B07047D0 +:109920002DE9F0410A4D0E4607462C682868B0F133 +:10993000006F08D12146AC064FF4CA722046F7F7F3 +:109940003FF92046286004EB87000664BDE8F081FB +:1099500008ED00E02DE9F0411C4617460E00804658 +:1099600007D0054602E02846B0473D442046641E25 +:10997000F9D24046BDE8F0810020F7F7FEBD0000B7 +:109980000A2209210148FFF71BB8000048520020B5 +:1099900010B584B00023172216211948FFF7E0FA0A +:1099A000184A1949F7F746F80520009003221421B8 +:1099B000CDE901120623072204211448FFF73AFFDC +:1099C000104A1349F7F736F81248002410210460B2 +:1099D00044608460C46000F0B5FA0F48214604601A +:1099E00044608460C46000F0ADFA0C481221046049 +:1099F00044608460C46004B0BDE8104000F0A2BAC6 +:109A0000CC5B002000000008898F0008A05C0020CB +:109A10009D9800085C5D00206C5D00207C5D00204E +:109A200002486A4620F00700704700006F7100206E +:109A300030380A2801D2012070470020704700000A +:109A40000328BCBF002070470749002201EB8001BA +:109A500051F80C0C41F80C2C002804BF4FF0FF30DB +:109A60007047016849680847900900200328BCBF77 +:109A700000207047064901EB800050F80C0C0028CC +:109A800004BF4FF0FF307047016889690847000044 +:109A9000900900200328BCBF01207047064901EB54 +:109AA000800050F80C0C002804BF4FF0FF307047C6 +:109AB0000168C96808470000900900202DE9F043BB +:109AC0000E4683B081466149F7F7D4F8604C10B375 +:109AD00060494846F7F7CEF840B35F494846F7F784 +:109AE000C9F870B35D4C2068002804BF201D2060B9 +:109AF000251DA84204D0562259495A4800F09CFC22 +:109B00002168594F002400BF57F8240028B3641C73 +:109B1000102CF9D323E0206820B9032202215348F6 +:109B200000F074FE03B00020BDE8F083206820B987 +:109B3000032202214D4800F069FE03B00120BDE878 +:109B4000F083FFE7206820B903220221474800F094 +:109B50005DFE03B00220BDE8F083102C11D33F4816 +:109B6000002904BF011D01600068A84204D05622EC +:109B70003B493C4800F060FC03B04FF0FF30BDE8CB +:109B8000F0834FF0FF3047F824003448002904BF29 +:109B9000011D01600068A84204D0562230493148B6 +:109BA00000F04AFC99F800004FF000083A2810D065 +:109BB00049466846FFF716FB6846FFF700FB98B377 +:109BC0006846FFF701FB0028684609D0FFF7E9FA6D +:109BD00022E06A4626A14846F6F790FD00981BE071 +:109BE000FFF7D3FA00B316F0020F18BF022522D0F8 +:109BF00016F00C0F18BF45F4007516F0040F18BFCF +:109C000045F4806506466846FFF7EAFA0146306883 +:109C10002A4683683046984700281FBF47F824002B +:109C2000E01C03B0BDE8F08347F8248003B04FF098 +:109C3000FF30BDE8F08316F0040F18BF0125D7D11F +:109C400016F0080F14BF09250025D1E7C4B200089B +:109C5000E0010020CBB20008D3B200080C020020C3 +:109C60000CC50008F8C400089009002090080020E6 +:109C70003A2570000328BCBF00207047064A02EB5B +:109C8000800050F80C0C002804BF4FF0FF307047E4 +:109C900002681369002218479009002070B5144625 +:109CA0000E46032813DA1248006820B90322022165 +:109CB000104800F0ABFD0025002C06D9715D0D4861 +:109CC00000F036FF6D1CAC42F8D820460DE00A4982 +:109CD00001EB800050F80C0C002804BF4FF0FF305F +:109CE00070BD01680B6831469847201A70BD0000AE +:109CF000E0010020900800209009002070B5EFF3EB +:109D00001080012121EA000080F0010572B60D4C9F +:109D10006068002808BF25706068B0F1FF3F04D17B +:109D2000322209A110A000F087FB606828B125B994 +:109D3000362205A116A000F07FFB6068401C606021 +:109D400070BD0000FC0100206D6265642D646576C5 +:109D50002F636F6D6D6F6E2F6D6265645F637269E7 +:109D6000746963616C2E6300696E746572727570DC +:109D7000745F656E61626C655F636F756E7465724A +:109D8000203C2055494E5433325F4D41580000006D +:109D9000696E74657272757074735F646973616201 +:109DA0006C65640010B50E4C6068002808BF10BDDB +:109DB000EFF31080012121EA000090F0010F04D19F +:109DC000472208A10FA000F037FB6068401E6060CA +:109DD0006068002806BF2078002810BD62B610BD5C +:109DE000FC0100206D6265642D6465762F636F6DE4 +:109DF0006D6F6E2F6D6265645F6372697469636114 +:109E00006C2E6300696E74657272757074735F6432 +:109E1000697361626C6564000FB410B503A90298A0 +:109E200000F0B4FB012000F001F8000004460548F2 +:109E3000F6F743FD0448F6F740FD002C18BF00F08C +:109E400025FBFEE7A0700020F4700020004870475A +:109E5000BCB2000870B50446B0F900000D46B0F180 +:109E6000FF3F04D1462209A117A000F0E5FAB4F99A +:109E70000000012D04D0BDE87040002100F0B4BB0B +:109E8000BDE87040012100F0AFBB00006D62656469 +:109E90002D6465762F746172676574732F68616CC9 +:109EA0002F5441524745545F53544D2F544152470C +:109EB00045545F53544D333246342F6770696F5F9A +:109EC0006170692E630000006F626A2D3E70696EDA +:109ED00020213D202850696E4E616D65294E43005A +:109EE00070B50C4605460180B1F1FF3F08BF70BD5B +:109EF000C4F30310FAF7CAFC06460021204600F01E +:109F000073FB04F00F00012101FA00F0686006F114 +:109F10001000A8600830E86070BD70B500260546E6 +:109F20000C46FFF7DDFFB4F1FF3F08BF70BD002115 +:109F30002846FFF78FFF31462846BDE8704000F005 +:109F40009BB9000070B504460D460026FFF7C8FF18 +:109F5000B5F1FF3F08BF70BDB4F90000B0F1FF3F9D +:109F600005D10A49342201F1400000F065FAA088C9 +:109F7000E1680004086001212046FFF76BFF3146CD +:109F80002046BDE8704000F077B90000E09F00086F +:109F90002DE9F04104460E4600271546FFF7A0FFC5 +:109FA000B6F1FF3F08BFBDE8F081B4F90000B0F1A1 +:109FB000FF3F04D134220AA119A000F03DFA002D80 +:109FC00012BF6068A0880004E16808600121204693 +:109FD000FFF740FF39462046BDE8F04100F04CB99C +:109FE0006D6265642D6465762F7461726765747344 +:109FF0002F68616C2F5441524745545F53544D2F85 +:10A000005441524745545F53544D333246342F67C1 +:10A0100070696F5F6F626A6563742E68000000008C +:10A020006F626A2D3E70696E20213D202850696E56 +:10A030004E616D65294E43000121002000F020B9DA +:10A040000121084600F01CB90121022000F018B9D6 +:10A050000121032000F014B90121042000F010B9FF +:10A060000521084600F00CB90621084600F008B9A1 +:10A0700070B504464068104A00EB400101EB001047 +:10A080000C49012301EB8000217B002501F00F0129 +:10A0900052F8211002688B409A43026000EB810065 +:10A0A00029464560C5614563B4F90C0000F09CFA8F +:10A0B000A56070BD5C040020A00100202DE9F84FD0 +:10A0C0009A4693460F468046B1F1FF3F04BF4FF0DA +:10A0D000FF30BDE8F88FC7F3031007F00F09B9F19F +:10A0E000100F5DD2DFE809F0080C1014181C1C1CBE +:10A0F0001C1C20202020202006242D4E002516E0A8 +:10A1000007242C4E012512E008242B4E02250EE0D8 +:10A1100009242A4E03250AE00A24294E042506E0D4 +:10A120001724284E052502E02824274E0625FAF795 +:10A13000ADFB00900721384600F056FA3146204624 +:10A14000FFF7EEFB04F01F00012202FA00F06109A4 +:10A15000890001F1E021C1F8000188F800400020E9 +:10A16000C8E9015005EB4500184900EB051001EB6B +:10A1700080001749A8F80C70036851F829108A402C +:10A180001A4300EB81010260C1F804A00098C1F8F5 +:10A190003490C8610F48C0F800B00020BDE8F88FC7 +:10A1A0000DA0FFF739FE4FF0FF30BDE8F88F00003B +:10A1B00039A0000841A0000849A0000851A00008EB +:10A1C00059A0000861A0000869A000085C040020F4 +:10A1D000A00100209C010020496E746572727570A8 +:10A1E00074496E206572726F723A2070696E206ECB +:10A1F0006F7420737570706F727465642E0A00003E +:10A2000030B40B460C21012402254FF0000CB2B1F2 +:10A210000322012B02D0022B0BD01DE08168022902 +:10A2200018BF032902D10821826015E0062184604D +:10A2300012E08168012918BF032914D1F3E7012B2B +:10A2400002D0022B12D007E08268022A18BF032A2C +:10A2500009D000BFC0F808C0B0F90C0030BC6CF3E6 +:10A260001F1100F0C1B907218560F5E78268012A56 +:10A2700018BF032AEED1D9E7B0F9000000F004BA04 +:10A280002DE9F0470E0000EB400101EB00101949E9 +:10A290004FF0000401EB800508BFBDE8F0870127FF +:10A2A000DFF85480DFF85490296807FA04F001427F +:10A2B0001AD005EB8400D8F8003090F83420C1693A +:10A2C00007FA02F213420FD0C8F80020406858B1D4 +:10A2D0000969114204D1D9F800200221904703E016 +:10A2E000D9F8002001219047641CB442DCD3BDE8BA +:10A2F000F08700005C040020143C01409C01002019 +:10A3000010B5144C016821600A6822F040020A600E +:10A31000016961608169E1610021A160C2686261D7 +:10A32000826822610722C4E90A124268E26021625F +:10A3300040696162A0612046F9F7E6FF00281CBF72 +:10A3400005A0FFF769FD2068016841F04001016048 +:10A3500010BD0000DC08002043616E6E6F74206940 +:10A360006E697469616C697A652053504900000018 +:10A3700010B5194A416802EB8114016821608168B7 +:10A380006160C168A1600169E16041692161016AA0 +:10A39000A1610021E161E184A184E185A185B0F999 +:10A3A0001A10B1F1FF3F04BF0820606107D0B0F977 +:10A3B0001800B0F1FF3F0CBF04200C206061FAF7D9 +:10A3C000D5FA2046FAF784F9002808BF10BD03A08B +:10A3D000BDE81040FFF720BD9006002043616E6E7F +:10A3E0006F7420696E697469616C697A6520554182 +:10A3F00052540A000D480178102905D1FF21FBF7BE +:10A40000F7FE0B4840688047FBF77CFF0948FDF7E3 +:10A4100055FC0848FDF7D8FB0648FDF773FC0028FB +:10A420001CBF0448FDF71EFCF3E700000010010804 +:10A430000000FF1F4852002070B514460D46064626 +:10A44000FFF75CFC23462A46314603A000F074F86F +:10A45000BDE8704000F01AB86D62656420617373E6 +:10A460006572746174696F6E206661696C65643AC7 +:10A470002025732C2066696C653A2025732C206C8E +:10A48000696E65202564200A0000000084B0FFF793 +:10A4900035FC05216846FFF755FD00BFBDF90000FA +:10A4A000B0F1FF3F04D134220DA11DA0FFF7C4FF7E +:10A4B000039901980860962000F068FDBDF900003E +:10A4C000B0F1FF3F04D1342205A115A0FFF7B4FF7E +:10A4D0000198039900040860962000F057FDDDE71D +:10A4E0006D6265642D6465762F746172676574733F +:10A4F0002F68616C2F5441524745545F53544D2F80 +:10A500005441524745545F53544D333246342F67BC +:10A5100070696F5F6F626A6563742E680000000087 +:10A520006F626A2D3E70696E20213D202850696E51 +:10A530004E616D65294E43000FB470B5A0B025ACD7 +:10A54000249DFFF7DBFB224629466846F5F764FFAA +:10A55000051E10DD0B48006820B9032202210A48BD +:10A5600000F054F900246E460748315D00F0E0FA2F +:10A57000641CAC42F8DBFFF715FC20B070BC5DF842 +:10A5800014FB0000E00100209008002070B5A0B08E +:10A590000C460546FFF7B2FB224629466846F5F70A +:10A5A0003BFF051E10DD0A48006820B90322022186 +:10A5B000084800F02BF900246E460648315D00F093 +:10A5C000B7FA641CAC42F8DBFFF7ECFB20B070BDBF +:10A5D000E001002090080020704710B5FAF7C6F996 +:10A5E000BDE81040F8F7B4BDF0B585B00C4605469F +:10A5F000B0F1FF3F04D181220FA11DA0FFF71CFF86 +:10A6000004F00F07C4F30216C5F30310C4F3C31418 +:10A6100005F00F05FAF73AF90121A940009119490F +:10A6200051F82710CDE901160321CDE9031469463D +:10A63000F8F778FC05B0F0BD6D6265642D64657651 +:10A640002F746172676574732F68616C2F54415267 +:10A650004745545F53544D2F5441524745545F531F +:10A66000544D333246342F70696E6D61702E630025 +:10A6700070696E20213D202850696E4E616D6529FC +:10A680004E43000054B2000870B50C460546B0F1C8 +:10A69000FF3F04D1A6220CA119A0FFF7CDFEC5F300 +:10A6A000031005F00F05FAF7F1F8022C88BF00241B +:10A6B000C268690003238B409A43C260C26804FAEF +:10A6C00001F11143C16070BD6D6265642D646576F2 +:10A6D0002F746172676574732F68616C2F544152D7 +:10A6E0004745545F53544D2F5441524745545F538F +:10A6F000544D333246342F70696E6D61702E630095 +:10A7000070696E20213D202850696E4E616D65296B +:10A710004E430000884208BF7047B0F1FF3F04BFBE +:10A720000846704710B5B1F1FF3F08BF10BD03A048 +:10A73000FFF772FB4FF0FF3010BD000070696E6DC7 +:10A740006170206D69732D6D617463680000000095 +:10A7500010B5B0F1FF3F08BF10BDB1F90020B2F154 +:10A76000FF3F0DD0B1F90020824204D14C68B4F112 +:10A77000FF3F0AD106E031F90C2FB2F1FF3FF1D1D2 +:10A780004FF0FF3402A0FFF747FB204610BD00004A +:10A7900070696E6D6170206E6F7420666F756E6487 +:10A7A00020666F72207065726970686572616C00F6 +:10A7B00010B50446B0F1FF3F08BF10BDB1F900006D +:10A7C000B0F1FF3F13D000BFB1F90000A04209D1A2 +:10A7D00089682046FFF708FF2046BDE810400021A9 +:10A7E000FFF752BF31F90C0FB0F1FF3FECD1BDE8DC +:10A7F000104001A0FFF710BB636F756C64206E6F93 +:10A80000742070696E6F7574000000002DE9F843C4 +:10A810000F46044616464B493846FFF799FF054652 +:10A8200049493046FFF794FF01462846FFF772FF7B +:10A830002060B0F1FF3F04D16A2244A152A0FFF78B +:10A84000FBFD20684FF00108A0F18042B2F588427C +:10A850004FF000051AD053495348B2F54C4F03D07E +:10A86000B2F5504F27D038E00A6842F010020A6073 +:10A870000A6822F010020A60016841F010010160CC +:10A88000006800F010000090656026E0474801680D +:10A8900041F400310160016821F400310160444855 +:10A8A000016841F400310160006800F4003000905C +:10A8B000C4F8048011E00A6842F020020A600A68C5 +:10A8C00022F020020A60016841F020010160006866 +:10A8D000052100F02000009061601A493846FFF71A +:10A8E00067FF19493046FFF763FFB7F1FF3F03D019 +:10A8F00001213846FFF7C8FEB6F1FF3F03D0012122 +:10A900003046FFF7C1FE4FF41651C4E90215256128 +:10A9100065612562278320466683FFF729FD20684D +:10A92000A0F18041B1F5884118BFBDE8F883214806 +:10A9300021464C22C0F80080BDE8F8431E48F6F7D7 +:10A940003FB90000A0B00008E8B000086D6265647F +:10A950002D6465762F746172676574732F68616CFE +:10A960002F5441524745545F53544D2F5441524741 +:10A9700045545F53544D333246342F7365726961C9 +:10A980006C5F6170692E63006F626A5F732D3E7544 +:10A9900061727420213D2028554152544E616D65ED +:10A9A000294E4300243802404438024020380240F7 +:10A9B00040380240E001002090080020034B59601D +:10A9C0004068034941F8202070470000E001002062 +:10A9D000700600202DE9F04304464068DFF84C8102 +:10A9E00083B008EB801900270097D9F80000A66B08 +:10A9F0003D46016811F0400F1CBFC16811F0400FC7 +:10AA000006D0E16911F0040F1CBF01F004010091B0 +:10AA1000016811F0010F1CBF416911F0010F05D051 +:10AA2000A18B009A01F4006111430091016811F0BB +:10AA3000020F1CBF416911F0010F05D0A18B009AD4 +:10AA400001F4806111430091016811F0080F1CBFEF +:10AA5000406910F0010F05D0A08B009900F4007040 +:10AA6000084300904846F9F7EBFC009810F4006F9B +:10AA700001BF009810F4806F009810F4007F51D14E +:10AA8000B9F82C0018B1B9F82E10411A2164B9F8A0 +:10AA90002E0050B9D4E90F01401E814205D3A08B8E +:10AAA000009900F4807008430090A08B10F4005FC0 +:10AAB00018BF002E36D0226C002A88BF94F84800B8 +:10AAC00030D9715D814229D12564A08B009900F4B1 +:10AAD000005008430090606808EB80100168CA6865 +:10AAE00022F02002CA600168CA6822F48072CA603B +:10AAF00001684A6922F001024A6102686FF0200190 +:10AB00001160016849680191C78590F83A102329BE +:10AB100014BF2021212180F83A1003E0691CCDB236 +:10AB2000AA42CED8009803B0BDE8F083900600207A +:10AB30004268074800EB821318680268C2F3C0122B +:10AB4000002AFAD0C1F30800196848607047000075 +:10AB50009006002030B44FF0000C102906BF4FF4CF +:10AB600000614160C0F804C0002A04BFC0F808C0FA +:10AB7000C0F80CC00CD00121012A08BFC0E902C1F5 +:10AB800006D00224022A14BFC0E90241C0E9024CE7 +:10AB90004169B1F5007F07D0002B08BF4FF4802C2E +:10ABA000C0F814C003D000E00BB1002101E04FF465 +:10ABB0008271016130BCFFF7A3BB00002DE9F041B9 +:10ABC000074600680024A0F560500E462546B0F107 +:10ABD000804018BFB0F5806F0CD0B0F5784F18BF2B +:10ABE000B0F57C4F03D012A0FFF716F90BE0F9F790 +:10ABF00073F901E0F9F758F9044604E004EBD47066 +:10AC00004410681CC5B2B44201DD082DF6D3082DEE +:10AC100006D80D4800EB450030F8020CB86102E0A0 +:10AC20000AA0FFF7F9F83846BDE8F041FFF768BB26 +:10AC300053504920696E7374616E6365206E6F7442 +:10AC4000207365740000000088B20008436F756CC3 +:10AC5000646E2774207365747570207265717565F4 +:10AC60007374656420535049206672657175656E12 +:10AC7000637900002DE9F84F894604461F46904647 +:10AC8000464948460A9EFFF763FD00904449404606 +:10AC9000FFF75EFD824643493846FFF759FD83467C +:10ACA00041493046FFF754FD054651460098FFF7ED +:10ACB00031FD824629465846FFF72CFD0146504695 +:10ACC000FFF728FD2060B0F1FF3F04D1512237A1EA +:10ACD00045A0FFF7B1FB216849480025A1F180425A +:10ACE000B2F5983207D1016841F4805101600168E2 +:10ACF00001F48051009122684249A2F18043B3F5EA +:10AD0000605307D10A6842F480420A600A6802F47C +:10AD1000804200922268A2F18043B3F5705307D1BC +:10AD20000A6842F400420A60096801F40041009197 +:10AD30002168A1F18042B2F59A3207D1016841F44D +:10AD400000510160006800F400500090134948462B +:10AD5000FFF72EFD12494046FFF72AFD11493846FC +:10AD6000FFF726FD6560A5603820E560A061A4F8C6 +:10AD70001C80A4F81E9027846684B6F1FF3F04BFB0 +:10AD80004FF40070606103D007493046FFF710FDB3 +:10AD90002046BDE8F84FFFF7B3BA000030B1000815 +:10ADA00078B10008C0B1000808B200086D6265649F +:10ADB0002D6465762F746172676574732F68616C9A +:10ADC0002F5441524745545F53544D2F54415247DD +:10ADD00045545F53544D333246342F7370695F616D +:10ADE00070692E63000000006F626A2D3E73706907 +:10ADF00020213D20285350494E616D65294E430066 +:10AE000044380240403802400A4AD0F800C0036883 +:10AE100013609B68C3F34003002BF8D089B2CCF8D1 +:10AE20000C10036801681160896811F0010FF9D0F6 +:10AE3000D8687047DC08002010B504460068C06878 +:10AE40008047606840680028206811D040688047CB +:10AE500061680246486803689A1A002A0CDC826816 +:10AE60004A606168096800291CBF40688847E8E7B4 +:10AE70008068BDE81040004748682168006809699B +:10AE8000BDE81040084700684068004770B5164CA0 +:10AE90002068016911F0020F1CBFC16811F0020F98 +:10AEA00004D06FF00201016100F048F820680169E8 +:10AEB00011F0040F1ABFC16811F0040F70BD6FF0DC +:10AEC000040101612068456A084E3068281AB0F50F +:10AED0007A7F38BF70BDF8F733F9216805F57A70CD +:10AEE0008863356070BD00002004002094010020BC +:10AEF00002496FF002000968086170475409002098 +:10AF000003480068C16821F00201C1607047000079 +:10AF10005409002006480168002918BF7047012124 +:10AF200001600549034808600020F8F72BB90000CC +:10AF3000EC010020000C0040540900200148FFF7FC +:10AF40007BBF0000BCB20008074810B5016839B9E2 +:10AF5000012101600649054808600020F8F712F950 +:10AF60000448006810BD0000EC010020000C004007 +:10AF700054090020240C0040034909684863C8684C +:10AF800040F00200C86070475409002070B54FF4CB +:10AF90007A7100FB01F5FFF7D7FF0446FFF7D4FFF6 +:10AFA000001BA842FAD370BD70B50546FFF7CCFF71 +:10AFB0004FEA0004FFF7C8FF001BA842FAD370BD98 +:10AFC00010B500290AD00878002807D00548784431 +:10AFD000F5F750FE002801D0002010BD024878444B +:10AFE00010BD00007A1500007215000010B5002990 +:10AFF0000AD00878002807D005487844F5F73AFECB +:10B00000002801D0002010BD0248784410BD000087 +:10B010006A1500006215000010B50446006800289B +:10B0200006BF201D20602068211D884204D05622C2 +:10B0300002490348FFF700FA206810BD0CC500085C +:10B04000F8C400084A68096800EB620012F0010FBA +:10B0500001D002685158084730B4002804BF30BC02 +:10B06000704713684BB1526800EB620012F0010F99 +:10B0700001D00268D35830BC1847D2F804C01CF085 +:10B08000010F18BFBCF1000FEDD130BC70474FF07D +:10B090004070E1EE100A7047F6F7B5BBF6F7EABC70 +:10B0A000020000000044004093030000090000007B +:10B0B00000100140930300000B0000000014014049 +:10B0C000130400001600000000100140930300006C +:10B0D000260000000014014013040000FFFF0000E0 +:10B0E000FFFFFFFF000000000300000000440040DD +:10B0F000930300000A0000000010014093030000C9 +:10B100000C000000001401401304000017000000B0 +:10B1100000100140930300002700000000140140CC +:10B1200013040000FFFF0000FFFFFFFF000000000E +:10B1300007000000003001409302000015000000ED +:10B1400000300140930200001F0000000038004062 +:10B15000930200002300000000380040930200002A +:10B160002C000000003C004013030000FFFF000023 +:10B17000FFFFFFFF0000000006000000003001405C +:10B180009302000014000000003001409302000010 +:10B190001E00000000380040930200002200000062 +:10B1A00000380040930200002B000000003C0040EB +:10B1B00013030000FFFF0000FFFFFFFF000000007F +:10B1C0000500000000300140930200001300000061 +:10B1D00000300140930200001A00000000380040D7 +:10B1E000930200001D0000000038004093020000A0 +:10B1F0002A000000003C004013030000FFFF000095 +:10B20000FFFFFFFF000000000400000000300140CD +:10B21000830200000F0000000030014083020000A4 +:10B220001900000000380040830200001C000000EC +:10B230000038004083020000FFFF0000FFFFFFFF17 +:10B2400000000000000000000000000001020304F4 +:10B2500006070809000000000100000011000000BE +:10B2600002000000120000000300000000001110A6 +:10B270000000211000003110000012100000221008 +:10B28000000032100000001000000800100018003C +:10B2900020002800300038000000000001020304F4 +:10B2A000010203040607080915AF000849AF0008AA +:10B2B00001AF0008F1AE000879AF0008A8B200089D +:10B2C000040200202F737464696E002F7374646F1E +:10B2D0007574002F7374646572720000D98A000857 +:10B2E000000000000000000000000000111111111A +:10B2F00011111111102056657273696F6E3A20306A +:10B300002E310000FF0000000200000000000000DD +:10B31000FF0007000100000000000000FF01000026 +:10B320000801000067000000FF020000100000009C +:10B3300000000000FF040000080000000000000002 +:10B34000FF0500000800000000000000FF060000EC +:10B350000800000000000000FF07000008000000D7 +:10B3600000000000FF0800000801000000000000CD +:10B37000FF0900000800000000000000FF0A0000B4 +:10B380000800000000000000FF0B000008000000A3 +:10B3900000000000FF0C0000100100000000000091 +:10B3A000FF0E00000801000000000000FF0F000079 +:10B3B0000801000000000000FF1000000100000074 +:10B3C00000000000FF10010001000000000000006C +:10B3D000FF1002000100000000000000FF10030049 +:10B3E0000100000000000000FF110000010000004B +:10B3F00001000000FF110100010000000100000039 +:10B40000FF1200000100000000000000FF12010018 +:10B410000100000000000000FF1202000100000017 +:10B4200000000000FF120300010000000000000007 +:10B43000FF1300000101000000000000FF130100E5 +:10B440000101000000000000FF14000001010000E5 +:10B4500000000000FF1401000101000000000000D6 +:10B46000FF1402000101000000000000FF140300AF +:10B470000101000000000000FF14040001010000B1 +:10B4800000000000FF1500000101000000000000A6 +:10B49000FF1501000101000000000000FF1502007F +:10B4A0000101000000000000FF1503000101000081 +:10B4B00000000000FF150400010100000000000072 +:10B4C000FF1505000101000000000000FF15060047 +:10B4D0000101000000000000FF150700010100004D +:10B4E00000000000FF160000010100000000000045 +:10B4F000FF1601000101000000000000FF1602001D +:10B500000101000000000000FF160300010100001F +:10B5100000000000FF160400010100000000000010 +:10B52000FF1605000101000000000000FF160600E4 +:10B530000101000000000000FF16070001010000EB +:10B5400000000000FF1700000101000000000000E3 +:10B55000FF1701000101000000000000FF170200BA +:10B560000101000000000000FF17030001010000BE +:10B5700000000000FF1704000101000000000000AF +:10B58000FF1705000101000000000000FF17060082 +:10B590000101000000000000FF170700010100008A +:10B5A00000000000FF180000010100000000000082 +:10B5B000FF1801000101000000000000FF18020058 +:10B5C0000101000000000000FF180300010100005D +:10B5D00000000000FF18040001010000000000004E +:10B5E000FF1805000101000000000000FF18060020 +:10B5F0000101000000000000FF1807000101000029 +:10B6000000000000FF190000010100000000000020 +:10B61000FF1901000101000000000000FF190200F5 +:10B620000101000000000000FF1A000001010000FD +:10B6300000000000FF1A01000101000000000000EE +:10B64000FF1A02000101000000000000FF1A0300C1 +:10B650000101000000000000FF1A040001010000C9 +:10B6600000000000FF1A05000101000000000000BA +:10B67000FF1A06000101000000000000FF1A070089 +:10B680000101000000000000FF1B0000040000009A +:10B6900000000000FF1C000004000000000000008B +:10B6A000FF1D00000500000000000000FF1E00005C +:10B6B0000501000000000000FF1F00000500000061 +:10B6C00000000000FF200000080100000000000052 +:10B6D000FF7D00000801000000000000FF7E000068 +:10B6E0000801000001000000FF7F000001000000D1 +:10B6F0000100000000210000010000000000000027 +:10B7000000210100010000000100000000210200F2 +:10B710000100000000000000002103000100000003 +:10B7200000000000002104000100000000000000F3 +:10B7300000210500010000000000000000220000C0 +:10B7400004000000070000000023000008000000C3 +:10B75000F0000000002400010D00000080FEFFFF4B +:10B76000002600010D00000080FFFFFF00280001FF +:10B770000D00000080000000002A00010D00000004 +:10B7800080010000002C00010D00000080FEFFFF82 +:10B79000002E00010D00000080FFFFFF00300001BF +:10B7A0000D00000080000000003200010D000000CC +:10B7B00080010000003400010D00000000000000C6 +:10B7C000003600010D0000000000000000400000F5 +:10B7D0000100000000000000004001000400000023 +:10B7E000070000000041000007000000000000000A +:10B7F00000420000070000000000000000430000BD +:10B8000007000000000000000044000007000000E6 +:10B8100000000000004500000700000000000000DC +:10B820000046000007000000000000000047000084 +:10B8300007000000000000000048000007000000B2 +:10B8400000000000004900000100000000000000AE +:10B850000049010001000000010000000049020051 +:10B860000100000001000000004903000100000089 +:10B870000100000000490400010000000100000078 +:10B880000049050001000000010000000049060019 +:10B890000100000001000000004A00000400000058 +:10B8A00004000000004A040004000000040000003E +:10B8B000004B00000400000004000000004B0400E6 +:10B8C0000400000004000000004C00000400000020 +:10B8D00004000000004C040004000000040000000C +:10B8E000004D00000400000004000000004E0000B5 +:10B8F0000400000004000000004E040003000000EB +:10B9000005000000005100000C00000000000000D5 +:10B91000005300000C000000FC0F00000055000068 +:10B9200008000000070000000056000008000000AA +:10B9300000000000005700000801000000000000A7 +:10B94000005800000801000000000000005900003D +:10B95000010000000100000000590100010000008A +:10B9600001000000005A000001000000000000007B +:10B97000005A01000300000000000000005B00000E +:10B980000800000000000000005C0000080000004B +:10B990001D000000005D000006000000090000001E +:10B9A000005E00000200000002000000005E0200D5 +:10B9B0000200000001000000005E04000200000020 +:10B9C00000000000005F0000040000000100000013 +:10B9D000005F04000400000002000000006000009E +:10B9E000100000000A0000000062000001000000DA +:10B9F00001000000006201000100000001000000E1 +:10BA00000063000004000000080000000063040060 +:10BA100002000000020000000064000007000000B7 +:10BA2000000000000065000008000000FF000000AA +:10BA30000066000001000000010000000067000037 +:10BA40000800000000000000006800000400000082 +:10BA50000800000000680400040000000700000067 +:10BA600000690100010000000100000000690200FF +:10BA70000100000001000000006903000100000057 +:10BA800001000000006A0000010000000100000049 +:10BA9000006A01000100000001000000006A0200CD +:10BAA0000100000000000000006A03000100000027 +:10BAB00000000000006A0400010100000000000016 +:10BAC000006A05000101000000000000006A060095 +:10BAD0000100000000000000006A070001000000F3 +:10BAE00000000000006B00000800000001000000E2 +:10BAF000006C00000800000020000000006D000045 +:10BB00000800000064000000006E00000800000053 +:10BB100064000000006F0000050000000700000046 +:10BB2000007000000500000005000000007100002A +:10BB30000500000008000000007200000600000080 +:10BB4000000000000073000006000000000000007C +:10BB500000740000060000000000000000740600F1 +:10BB60000100000000000000007500000600000059 +:10BB700000000000012100000100000000000000A2 +:10BB8000012101000100000000000000012102006D +:10BB90000100000000000000012200001000000071 +:10BBA000000000000124000004000000010000006B +:10BBB0000124040004000000020000000125000030 +:10BBC0000300000000000000012700010800000041 +:10BBD0000000000001280001080000000000000033 +:10BBE00001290000010000000000000001290100FF +:10BBF0000400000000000000012905000100000011 +:10BC00000000000001290600010000000000000003 +:10BC1000012A00000200000000000000012A0200CA +:10BC20000300000005000000012A050002000000DA +:10BC300000000000012A07000100000001000000D0 +:10BC4000012B00000100000000000000012B01009A +:10BC50000100000000000000012B020003000000B2 +:10BC600000000000012C000008000000000000009F +:10BC7000012D00000100000001000000012E000065 +:10BC80000400000001000000012E04000400000078 +:10BC900002000000012F0000100000000A00000058 +:10BCA000013100000100000001000000013101002D +:10BCB0000100000001000000013200000800000047 +:10BCC0000A00000001330000030000000300000030 +:10BCD00001340000080000001D00000001350000D4 +:10BCE0000600000024000000013600000C000000E7 +:10BCF0000000000001380000020000000200000007 +:10BD000001380200020000000100000001380400B8 +:10BD100002000000000000000139000008000000DF +:10BD200000000000013A00000200000000000000D6 +:10BD3000013A02000100000000000000013A030087 +:10BD40000100000001000000013B000004000000B1 +:10BD500008000000013B0400020000000300000096 +:10BD6000013B06000100000000000000013C000053 +:10BD70000400000007000000013C04000100000076 +:10BD800001000000013D000008000000FF0000006D +:10BD9000013E00000801000080000000013F00009B +:10BDA0000300000000000000013F0300030000004A +:10BDB00000000000013F060001000000000000003C +:10BDC000013F0700010000000000000001400000EA +:10BDD000030000000000000001400300010000001B +:10BDE000000000000140040002000000000000000C +:10BDF00001400600010000000000000001410000B9 +:10BE000005000000000000000141070001000000E3 +:10BE100000000000014200001000000000000000CF +:10BE20000144000020000000000000000148000064 +:10BE30002000000000000000014C0000080000008D +:10BE400000000000014D00000100000001000000A2 +:10BE5000014D01000200000000000000014D030040 +:10BE60000100000001000000014D0400010000007D +:10BE700000000000014D050003000000000000006C +:10BE80000150000008000000000000000151000007 +:10BE90000800000000000000015200000100000046 +:10BEA00001000000015300000A0000000000000033 +:10BEB0000221000008000000000000000222000033 +:10BEC000080100000000000002230000080000003C +:10BED000000000000225000001000000000000003A +:10BEE00002260000080000000000000002270000F9 +:10BEF0000801000000000000022800000800000007 +:10BF000000000000022A0000010000000000000004 +:10BF1000022B00000100000000000000022B0100C5 +:10BF20000100000000000000022B020001000000E0 +:10BF300001000000022B03000100000000000000CF +:10BF4000022B04000100000000000000022B05008D +:10BF50000100000000000000022B060001000000AC +:10BF600000000000022C00000200000000000000A1 +:10BF7000022D00000400000002000000022D040059 +:10BF80000400000004000000022E00000400000075 +:10BF900002000000022E0400040000000400000063 +:10BFA000022F00000500000000000000022F050025 +:10BFB0000100000000000000022F06000100000048 +:10BFC00000000000022F0700010000000000000038 +:10BFD00002300000100000000000000002330000EA +:10BFE0000801000000000000023400000801000009 +:10BFF0000000000002360000080100000000000000 +:10C0000002380000080100000000000002390000B2 +:10C010000801000000000000023A000008010000D2 +:10C0200000000000023B00000801000000000000CA +:10C03000023C00000801000000000000023D00007A +:10C040000801000000000000023E0000080100009E +:10C0500000000000023F0000080100000000000096 +:10C060000240000008010000000000000241000042 +:10C070000801000000000000024200001001000062 +:10C080000000000002440000100100000000000059 +:10C09000024600002001000000000000024A0000EB +:10C0A0000401000000000000024A04000401000036 +:10C0B00000000000024B000004010000000000002E +:10C0C000024B04000401000000000000024C0000CC +:10C0D0000401000000000000024C04000401000004 +:10C0E00000000000024D00000401000000000000FC +:10C0F000024D04000401000000000000024E000098 +:10C100000401000000000000024F000003010000D5 +:10C1100000000000024F03000301000000000000C7 +:10C120000250000008000000000000000251000062 +:10C1300008000000000000000252000001000000A2 +:10C140000000000002520100010000000000000099 +:10C150000252020001000000000000000253000033 +:10C160000100000000000000025400000100000077 +:10C170000000000002540100010000000000000067 +:10C1800002540200020000000000000002540400FB +:10C19000030000000000000002540700010100003D +:10C1A0000000000002550000080000000000000030 +:10C1B00002560000080000000000000002570000C6 +:10C1C0000801000000000000025800000801000003 +:10C1D0000000000002590000010000000000000003 +:10C1E000025901000100000001000000025A000194 +:10C1F0000800000000000000025B020106000000D1 +:10C2000000000000025C00011000000000000000BF +:10C21000025E00000401000000000000025F000058 +:10C2200005010000000000000260000005010000A0 +:10C230000000000002610000050100000000000095 +:10C240000121000008000000000000008D96000899 +:10C25000000000003031323334353637383941424E +:10C260004344454640305800303132333435363758 +:10C270003839616263646566403078000400000804 +:10C28000000000000000000200010000100000009B +:10C290000000000000000000303132333435363702 +:10C2A00038396162636465667870003031323334E6 +:10C2B000353637383941424344454658500000002E +:10C2C00002400000000000A0000000000540000047 +:10C2D000000000C8000000000C4000000000409C6E +:10C2E00000000000194000000020BCBE000000005B +:10C2F00034400000BFC91B8E00000004B5400000A0 +:10C30000504BCFD06607E2CF010000006C41000027 +:10C310003E8251AADFEEA73401000000D94200009E +:10C32000DCB5A0E23A301F97FFFFFFFFB4450000E5 +:10C33000FD25A0C8E9A3C14FFFFFFFFFFF3F00009D +:10C340000000008000000000FF3F000000000080AF +:10C35000000000000000000000000000259200081E +:10C3600051920008599200080000000000000000EF +:10C3700061950008000000000000000079990008A5 +:10C380007999000879990008799900087999000845 +:10C3900079990008E9890008418A00080000000036 +:10C3A0003B8A00083D8A00080000000000000000F1 +:10C3B000000000000000000000000000000000007D +:10C3C00000000000000000006D8C0008000000006C +:10C3D0000000000000000000B98C00088D8C0008EF +:10C3E000698D00080000000000000000000000004F +:10C3F000000000000000000000000000898F00081D +:10C4000000000000000000000000000048FFFFFFE7 +:10C4100000000000BD8F0008B58F0008000000007C +:10C42000F98F0008B98F000800000000B18F0008E4 +:10C430000000000000000000B1980008B998000852 +:10C44000B39800080000000044FFFFFF0000000058 +:10C4500000000000000000000000000000000000DC +:10C46000BD8F0008B58F000800000000F98F00089C +:10C47000B98F000800000000B18F00083D9000084F +:10C48000000000003B8A00083D8A000879990008F6 +:10C4900079990008FCFFFFFF000000000000000089 +:10C4A0000000000000000000000000000D910008E6 +:10C4B0000000000000000000000000007999000862 +:10C4C0007999000879990008799900087999000804 +:10C4D00079990008E98900087991000800000000B6 +:10C4E0003B8A00083D8A0008FCFFFFFF00000000B7 +:10C4F00000000000000000005F707472203D3D20CD +:10C500002854202A29265F64617461006D62656485 +:10C510002D6465762F6170692F53696E676C657441 +:10C520006F6E5074722E68007CC600089401002063 +:10C530008C020000D001000868C700082004002019 +:10C54000486D00002C0200081C00000043000000A1 +:10C55000F8FFFFFF0C0000000E0000000F000000BD +:10C560002E0000001001000043000000F8FFFFFF54 +:10C5700000404040404040404040414141414140F6 +:10C5800040404040404040404040404040404040AB +:10C59000400502020202020202020202020202023A +:10C5A000022020202020202020202002020202023F +:10C5B0000202909090909090101010101010101097 +:10C5C00010101010101010101010101002020202A3 +:10C5D00002028888888888880808080808080808E7 +:10C5E00008080808080808080808080802020202E3 +:10C5F00040000000000000000000000000000000FB +:10C60000000000000000000000000000000000002A +:10C61000000000000000000000000000000000001A +:10C62000000000000000000000000000000000000A +:10C6300000000000000000000000000000000000FA +:10C6400000000000000000000000000000000000EA +:10C6500000000000000000000000000000000000DA +:10C6600000000000000000000000000000000000CA +:10C67000000000000DD3FFFF19D3FFFF51041CBDC4 +:10C6800001053201320232030A150414091B41016B +:10C690002B3B0A06572A4060140902431302011C6F +:10C6A000C03209621B01020B130524161001052478 +:10C6B000011009010424020205240617010705825E +:10C6C0000308151009040133020A1D07050102437E +:10C6D0002C070581070938442A40072A8107112BB6 +:10C6E0000907440A2204440A16FF4413E3661408A7 +:10C6F000FB681B0851044113C96D1B08E50C4B571F +:10C700006910811AFD181AF10413996E1408097042 +:10C710001408E1621B08DD3C1A352C5A393C7201C1 +:10C720001A09241A350413E16F1B0865081A41041D +:10C730001A15041AA5041E04030904128B1302021D +:10C740001E4083044057C15B020339690881041EFF +:10C75000C194C11502030A0E054603030E1B3202E3 +:08C760001AFF010110000000A6 +:040000050800019559 +:00000001FF
diff -r 000000000000 -r c76361bd82e8 readme.md --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/readme.md Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,188 @@ + / _____) _ | | + ( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | + (______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2017 Semtech-Cycleo + +LoRa Pico Cell Gateway project - MCU firmware +============================================= + + +## 1. Components +---------------- + +This directory contains the sources code of the Keil project to build a Picocell +Gateway MCU firmware based on the Semtech LoRa Picocell Gateway reference +design. +The target MCU is a STM32F401CD. The firmware implements either a USB CDC +protocol or a UART protocol to bridge commands coming from host to the SX1308 +SPI interface. +The embedded firmware takes in charge the power management of the SX1308 during +the downlink to respect the 500MA max power constraint in the USB plug. + + + ((( Y ))) + | + | + +- -|- - - - - - - - - - - - -+ xxxxxxxxxxxx +--------+ + |+--+-----------+ +------+| xxx xxx | | + || | | || xx Internet xx | | + || Pico Cell GW |<----+ Host |<-----xx or xx------>| | + || STM32F401CD | USB/| || xx Intranet xx | Server | + || Sx1308 | UART+------+| xxx xxx | | + || 2*SX1257 | Linux | xxxxxxxxxxxx | | + |+--------------+ | | | + | | +--------+ + | | + +- - - - - - - - - - - - - - -+ + + +### 1.1. MAIN ### + +The MAIN/ directory contains the main program that runs on the MCU, which +launches the USB/UART commands interpreter to communicate with the Host. + +### 1.2. CmdUSB ### + +The CmdUSB/ directory contains the USB/UART command interpreter to handle the +communication between the Host and the concentrator. It is a bridge to the HAL +which communicates with the SX1308 through SPI. + +### 1.3. usb_cdc ### + +The STM32 USB CDC library modified for this reference design. + +### 1.4. SX1308HAL ### + +The LoRa concentrator Hardware Abstraction Layer C library to configure the +hardware, send and receive packets. + + +## 2. Precompiled binaries +-------------------------- + +The bin/ directory contains the precompiled binary files in .hex or .dfu +formats, for both USB and UART communication bridges. +To load the binary file into the target MCU flash memory, you have to: + +### 2.1. USB + +* Make the MCU enter DFU mode: + - either press the BOOT0 button of the PicoCell GW while plugging it to the + host USB port + - or use the util_boot tool provided with the picoGW_hal repository. + +* Program the binary into the MCU flash memory: + - use a tool like dfu-util (http://dfu-util.sourceforge.net). + + ex: + ``` + dfu-util -a 0 -D pgw_fw_usb.dfu + ``` + + Note: you may have to use sudo depending on your priviledges. + +* Unplug/replug USB PicoCell GW to exit DFU mode. + + +### 2.2. UART + +* Make the MCU enter UART bootloader: + - either press the BOOT0 button of the PicoCell GW while plugging it to the + host USB port + - or use the util_boot tool provided with the picoGW_hal repository. + +* Program the binary into the MCU flash memory: + - use a tool like stm32flash (https://sourceforge.net/projects/stm32flash) + + ex: + ``` + stm32flash -b 115200 /dev/ttyS0 -v -w pgw_fw_uart.hex -g 0x0 + ``` + + +## 3. Build the project +----------------------- + +In order to compile the whole project, a Keil project is provided in the src/ +directory. Open the pgw.uvproj file in Keil and rebuild all. + +By default, it builds the project for using USB communication bridge. In order +to use the UART instead, uncomment the following line in src/MAIN/board.h before +building all the project. + +``` +#define USE_UART 1 +``` + +After the compilation as succeeded, a Pgw.hex file is created in the bin/ +directory. It is the file to be programmed in the MCU flash memory. Refer to +section 2 of this document to get information for flashing. +A DFU file can be created from this .hex file using the "Dfu file manager" tool +provided by STmicroelectronics. +[www.st.com/resource/en/user_manual/cd00155676.pdf](www.st.com/resource/en/user_manual/cd00155676.pdf) + + +## 4. User Guide +---------------- + +[A detailed PicoCell GW user guide is available here](http://www.semtech.com/images/datasheet/picocell_gateway_user_guide.pdf) + + +## 5. Changelog +--------------- + +### v0.2.1 ### + +* Added a delay in the MCU init procedure to ensure that HSE (32MHz external +clock) input is selected before starting USB enumeration. +* Reset the SX1257 radios to fix a potential bad POR (Power-On Reset) condition +when there are no Schottky diodes placed on the SX1257 radios reset line. +* Unify the USB VID/PID values between the Linux version and Windows +(picoGW_UI tool) version. + +### v0.2.0 ### + +* Reverted AGC firmware from version 5 back to version 4. +* Updated MCU FW version to match with picoGW_hal + +### v0.1.1 ### + +* Disabled USB vbus sensing +* Moved delay to wait for COM bridge to be initialized in CMDMANAGER::Init(). + +### v0.1.0 ### + +* Code clean-up, refactoring +* Support both USB and UART communication with host + +### v0.0.1 ### + +* Initial release + + +## 6. Legal notice +------------------ + +The information presented in this project documentation does not form part of +any quotation or contract, is believed to be accurate and reliable and may be +changed without notice. No liability will be accepted by the publisher for any +consequence of its use. Publication thereof does not convey nor imply any +license under patent or other industrial or intellectual property rights. +Semtech assumes no responsibility or liability whatsoever for any failure or +unexpected operation resulting from misuse, neglect improper installation, +repair or improper handling or unusual physical or electrical stress +including, but not limited to, exposure to parameters beyond the specified +maximum ratings or operation outside the specified range. + +SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE +SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER +CRITICAL APPLICATIONS. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS +UNDERSTOOD TO BE UNDERTAKEN SOLELY AT THE CUSTOMER'S OWN RISK. Should a +customer purchase or use Semtech products for any such unauthorized +application, the customer shall indemnify and hold Semtech and its officers, +employees, subsidiaries, affiliates, and distributors harmless against all +claims, costs damages and attorney fees which could arise. + +*EOF*
diff -r 000000000000 -r c76361bd82e8 src/DebugConfig/Pico_STM32F401RETx.dbgconf --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/DebugConfig/Pico_STM32F401RETx.dbgconf Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,33 @@ +// <<< Use Configuration Wizard in Context Menu >>> + +// <h>Debug MCU Configuration +// <o.0> DBG_SLEEP <i> Debug Sleep Mode +// <o.1> DBG_STOP <i> Debug Stop Mode +// <o.2> DBG_STANDBY <i> Debug Standby Mode +// </h> +DbgMCU_CR = 0x00000007; + +// <h> Debug MCU APB1 Freeze +// <o.0> DBG_TIM2_STOP <i> Timer 2 Stopped when Core is halted +// <o.1> DBG_TIM3_STOP <i> Timer 3 Stopped when Core is halted +// <o.2> DBG_TIM4_STOP <i> Timer 4 Stopped when Core is halted +// <o.3> DBG_TIM5_STOP <i> Timer 5 Stopped when Core is halted +// <o.10> DBG_RTC_STOP <i> RTC Stopped when Core is halted +// <o.11> DBG_WWDG_STOP <i> Window Watchdog Stopped when Core is halted +// <o.12> DBG_IWDG_STOP <i> Independent Watchdog Stopped when Core is halted +// <o.21> DBG_I2C1_SMBUS_TIMEOUT <i> I2C1 SMBUS Timeout Mode Stopped when Core is halted +// <o.22> DBG_I2C2_SMBUS_TIMEOUT <i> I2C2 SMBUS Timeout Mode Stopped when Core is halted +// <o.23> DBG_I2C3_SMBUS_TIMEOUT <i> I2C3 SMBUS Timeout Mode Stopped when Core is halted +// </h> +DbgMCU_APB1_Fz = 0x00000000; + + +// <h> Debug MCU APB2 Freeze +// <o.0> DBG_TIM1_STOP <i> Timer 1 Stopped when Core is halted +// <o.16> DBG_TIM9_STOP <i> Timer 9 Stopped when Core is halted +// <o.17> DBG_TIM10_STOP <i> Timer 10 Stopped when Core is halted +// <o.18> DBG_TIM11_STOP <i> Timer 11 Stopped when Core is halted +// </h> +DbgMCU_APB2_Fz = 0x00000000; + +// <<< end of configuration section >>> \ No newline at end of file
diff -r 000000000000 -r c76361bd82e8 src/GettingStarted.html --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/GettingStarted.html Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,16 @@ +<!DOCTYPE HTML> +<html lang="en-US"> + <head> + <meta charset="UTF-8"> + <meta http-equiv="refresh" + content="1;url="https://developer.mbed.org/handbook/Getting-Started-mbed-Exporters> + <script type="text/javascript"> + window.location.href = "https://developer.mbed.org/handbook/Getting-Started-mbed-Exporters" + </script> + <title>Page Redirection</title> + </head> + <body> + If you are not redirected automatically, please follow the + <a href='https://developer.mbed.org/handbook/Getting-Started-mbed-Exporters'>link to the online exporter documentation</a> + </body> +</html>
diff -r 000000000000 -r c76361bd82e8 src/MAIN/board.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/MAIN/board.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,35 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech
+*/
+
+#include "board.h"
+#include "mbed.h"
+
+#ifndef USE_UART
+Serial pc(PB_6, PB_7);
+#endif
+
+#ifdef V2
+SX1308 Sx1308(PA_4, PA_7, PA_6, PA_5, PB_4, PA_3);
+DigitalOut FEM_EN(PB_0); // enable ldo 2V for PA
+DigitalOut RADIO_RST (PA_0); // reset sx1257 but sx1257 deliver HSE clk for stm32 so use HSI clk before to reset sx1257
+DigitalOut HSCLKEN (PB_2); // clk to switch off the correlators
+#endif
+#ifdef V1
+SX1308 Sx1308(PA_4, PA_7, PA_6, PA_5, PB_1, PA_3);
+DigitalOut RADIO_RST (PA_0);
+DigitalOut HSCLKEN (PB_14);
+#endif
+
+void FLASH_Prog( uint32_t Address, uint8_t Data ) {
+ HAL_FLASH_Unlock();
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR);
+ FLASH_Erase_Sector(FLASH_SECTOR_4, VOLTAGE_RANGE_3); //sector4 0x8010000 0x801FFFF
+ HAL_FLASH_Program(FLASH_TYPEPROGRAM_BYTE, Address, Data);
+ HAL_FLASH_Lock();
+}
diff -r 000000000000 -r c76361bd82e8 src/MAIN/board.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/MAIN/board.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,36 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| + (C)2017 Semtech +*/ +#ifndef BOARD_H +#define BOARD_H + +#include "mbed.h" +#include "SX1308.h" + +//#define USE_UART 1 + +#define BOOTLOADER_ADDR 0x1FFF0004 +#define GOTO_BOOTLOADER 0x10 + +#define DATA_EEPROM_BASE ( ( uint32_t )0x8011000U ) /*!< DATA_EEPROM base address in the alias region */ +#define DATA_EEPROM_END ( ( uint32_t )DATA_EEPROM_BASE + 2048 ) /*!< DATA EEPROM end address in the alias region */ + +extern SX1308 Sx1308; + +#ifndef USE_UART +extern Serial pc; +#endif + +extern DigitalOut HSCLKEN ; +extern DigitalOut RADIO_RST ; +#ifdef V2 +extern DigitalOut FEM_EN; +#endif + +extern void FLASH_Prog( uint32_t Address, uint8_t Data ); +#endif
diff -r 000000000000 -r c76361bd82e8 src/MAIN/cmdUSB.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/MAIN/cmdUSB.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,645 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech
+
+*/
+
+#include "cmdUSB.h"
+#include "usb_device.h"
+#include "usbd_cdc_if.h"
+#include "loragw_hal.h"
+#include "loragw_reg.h"
+#include "mbed.h"
+#include "board.h"
+
+#define DELAY_COM_INIT 1000
+#define DELAY_RESET 200
+
+/*
+/Class INTERFACE definition
+*/
+
+INTERFACE::INTERFACE()
+{
+}
+
+/*
+/Class COMUSB definition
+*/
+
+COMUSB::COMUSB() : INTERFACE()
+{
+}
+void COMUSB::Init() {
+ __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+ MX_USB_DEVICE_Init();
+}
+
+void COMUSB::Receive(uint8_t * Buffer, uint32_t * size) {
+ CDC_Receive_FSP(Buffer,size);// wait interrrupt manage in HAL_PCD_DataOutStageCallback
+}
+
+void COMUSB::Transmit(uint8_t * Buffer, uint16_t size) {
+ if ((size % 64) == 0) { // for ZLP
+ size = size + 1;
+ } else {
+ size = size;
+ }
+ while (CDC_Transmit_FS(Buffer, size) != USBD_OK){
+ }
+}
+
+/*
+/Class COMUART definition
+*/
+
+COMUART::COMUART(PinName Tx, PinName Rx) : Serial(Tx, Rx), INTERFACE()
+{
+ //do nothing
+}
+
+void COMUART::Init() {
+ baud(BAUDRATE);
+}
+
+void COMUART::Receive(uint8_t * Buffer, uint32_t * size) {
+ uint16_t localSize = 0;
+ uint16_t cmdLength = 0;
+
+ while (localSize < CMD_HEADER_RX_SIZE) {
+ if (readable() == true) {
+ Buffer[localSize]= getc();
+ localSize++;
+ }
+ }
+ localSize = 0;
+ cmdLength = (Buffer[CMD_LENGTH_MSB] << 8) + Buffer[CMD_LENGTH_LSB];
+ while (localSize < cmdLength){
+ if (readable() == true) {
+ Buffer[localSize + CMD_HEADER_RX_SIZE ]= getc();
+ localSize++;
+ }
+ }
+ *size = (uint32_t)(cmdLength + CMD_HEADER_RX_SIZE);
+}
+
+void COMUART::Transmit(uint8_t * Buffer, uint16_t size) {
+ if ((size % 64) == 0) { // for ZLP Keep the same way than for USB transfer
+ size = size + 1;
+ } else {
+ size = size;
+ }
+ for (int g = 0; g < size; g++){
+ putc(Buffer[g]);
+ }
+}
+
+#ifdef USE_UART
+CMDMANAGER::CMDMANAGER(PinName Tx, PinName Rx)
+{
+ kill = false;
+ ActiveInterface = (INTERFACE *) new COMUART (Tx, Rx);
+ ActiveCom = ISUARTINTERFACE;
+}
+#else
+CMDMANAGER::CMDMANAGER(PinName Tx, PinName Rx)
+{
+ kill = false;
+ ActiveInterface = (INTERFACE *) new COMUSB ();
+ ActiveCom = ISUSBINTERFACE;
+}
+#endif
+
+void CMDMANAGER::InitBufFromHost() {
+ memset(BufFromHost, 0, sizeof BufFromHost);
+ memset(BufFromHostChunk, 0, sizeof BufFromHostChunk);
+ receivelength[0] = 0;
+ count = 1;
+}
+
+void CMDMANAGER::InitBufToHost() {
+ memset(BufToHost, 0, sizeof BufToHost);
+}
+
+void CMDMANAGER::Init() {
+ ActiveInterface->Init();
+ wait_ms(DELAY_COM_INIT);
+}
+
+void CMDMANAGER::ReceiveCmd (){
+ InitBufFromHost();
+ if (ActiveCom == ISUARTINTERFACE)
+ {
+ ActiveInterface->Receive(&BufFromHost[0], &receivelength[0]);
+ } else {
+ ActiveInterface->Receive(&BufFromHostChunk[0], &receivelength[0]);
+ count = 1;
+ while (count > 0) {// wait until receive cmd
+ }
+ count = 1;
+ }
+ InitBufToHost();
+}
+
+void CMDMANAGER::TransmitCmd (){
+ uint16_t size;
+ size = (uint16_t)((BufToHost[CMD_LENGTH_MSB] << 8) + BufToHost[CMD_LENGTH_LSB] + CMD_HEADER_TX_SIZE);
+ ActiveInterface->Transmit(BufToHost, size);
+ /* Check if a reset has been requested */
+ if (kill == true) {
+ wait_ms(DELAY_RESET);
+ NVIC_SystemReset();
+ }
+}
+
+/********************************************************/
+/* cmd name | description */
+/*------------------------------------------------------*/
+/* r |Read register */
+/* s |Read long burst First packet */
+/* t |Read long burst Middle packet */
+/* u |Read long burst End packet */
+/* p |Read atomic burst packet */
+/* w |Write register */
+/* x |Write long burst First packet */
+/* y |Write long burst Middle packet */
+/* z |Write long burst End packet */
+/* a |Write atomic burst packet */
+/*------------------------------------------------------*/
+/* b |lgw_receive cmd */
+/* c |lgw_rxrf_setconf cmd */
+/* d |int lgw_rxif_setconf_cmd */
+/* f |int lgw_send cmd */
+/* h |lgw_txgain_setconf */
+/* q |lgw_get_trigcnt */
+/* i |lgw_board_setconf */
+/* j |lgw_mcu_commit_radio_calibration */
+/* l |lgw_check_fw_version */
+/* m |Reset SX1308 and STM32 */
+/* n |Jump to bootloader */
+/********************************************************/
+int CMDMANAGER::DecodeCmd() {
+ int i = 0;
+ int adressreg;
+ int val;
+ int size;
+ int x;
+ CmdSettings_t cmdSettings_FromHost;
+
+ if (BufFromHost[0] == 0) {
+ return (CMD_ERROR);
+ }
+
+ cmdSettings_FromHost.id = BufFromHost[0];
+
+ if (CheckCmd(cmdSettings_FromHost.id) == false) {
+ BufToHost[0] = 'k';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_K0;
+ return(CMD_K0);
+ }
+
+ switch (cmdSettings_FromHost.id) {
+
+ case 'r': { // cmd Read register
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ val = Sx1308.spiRead(adressreg);
+ BufToHost[0] = 'r';
+ BufToHost[1] = 0;
+ BufToHost[2] = 1;
+ BufToHost[3] = ACK_OK;
+ BufToHost[4] = val;
+ return(CMD_OK);
+ }
+ case 's': { // cmd Read burst register first
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ size = (cmdSettings_FromHost.cmd_data[0] << 8) + cmdSettings_FromHost.cmd_data[1];
+ BufToHost[0] = 's';
+ BufToHost[1] = cmdSettings_FromHost.cmd_data[0];
+ BufToHost[2] = cmdSettings_FromHost.cmd_data[1];
+ BufToHost[3] = ACK_OK;
+ Sx1308.spiReadBurstF(adressreg, &BufToHost[4 + 0], size);
+ return(CMD_OK);
+ }
+ case 't': { // cmd Read burst register middle
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ size = (cmdSettings_FromHost.cmd_data[0] << 8) + cmdSettings_FromHost.cmd_data[1];
+
+ BufToHost[0] = 't';
+ BufToHost[1] = cmdSettings_FromHost.cmd_data[0];
+ BufToHost[2] = cmdSettings_FromHost.cmd_data[1];
+ BufToHost[3] = ACK_OK;
+ Sx1308.spiReadBurstM(adressreg, &BufToHost[4 + 0], size);
+ return(CMD_OK);
+ }
+ case 'u': { // cmd Read burst register end
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ size = (cmdSettings_FromHost.cmd_data[0] << 8) + cmdSettings_FromHost.cmd_data[1];
+ BufToHost[0] = 'u';
+ BufToHost[1] = cmdSettings_FromHost.cmd_data[0];
+ BufToHost[2] = cmdSettings_FromHost.cmd_data[1];
+ BufToHost[3] = ACK_OK;
+ Sx1308.spiReadBurstE(adressreg, &BufToHost[4 + 0], size);
+ return(CMD_OK);
+ }
+ case 'p': { // cmd Read burst register atomic
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ size = (cmdSettings_FromHost.cmd_data[0] << 8) + cmdSettings_FromHost.cmd_data[1];
+ BufToHost[0] = 'p';
+ BufToHost[1] = cmdSettings_FromHost.cmd_data[0];
+ BufToHost[2] = cmdSettings_FromHost.cmd_data[1];
+ BufToHost[3] = ACK_OK;
+ Sx1308.spiReadBurst(adressreg, &BufToHost[4 + 0], size);
+ return(CMD_OK);
+ }
+ case 'w': { // cmd write register
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ val = cmdSettings_FromHost.cmd_data[0];
+ Sx1308.spiWrite(adressreg, val);
+ BufToHost[0] = 'w';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_OK;
+ return(CMD_OK);
+ }
+ case 'x': { // cmd write burst register
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ size = cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8);
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ Sx1308.spiWriteBurstF(adressreg, &cmdSettings_FromHost.cmd_data[0], size);
+ BufToHost[0] = 'x';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_OK;
+ return(CMD_OK);
+ }
+ case 'y': { // cmd write burst register
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ size = cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8);
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ Sx1308.spiWriteBurstM(adressreg, &cmdSettings_FromHost.cmd_data[0], size);
+ BufToHost[0] = 'y';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_OK;
+ return(CMD_OK);
+ }
+ case 'z': { // cmd write burst register
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ size = cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8);
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ Sx1308.spiWriteBurstE(adressreg, &cmdSettings_FromHost.cmd_data[0], size);
+ BufToHost[0] = 'z';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_OK;
+ return(CMD_OK);
+ }
+ case 'a': { // cmd write burst atomic register
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ size = cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8);
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ Sx1308.spiWriteBurst(adressreg, &cmdSettings_FromHost.cmd_data[0], size);
+ BufToHost[0] = 'a';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_OK;
+ return(CMD_OK);
+ }
+ case 'b': { // lgw_receive
+ static struct lgw_pkt_rx_s pkt_data[16]; //16 max packets TBU
+ int nbpacket = 0;
+ int j = 0;
+ int sizeatomic = sizeof(lgw_pkt_rx_s) / sizeof(uint8_t);
+ int cptalc = 0;
+ int pt = 0;
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ adressreg = BufFromHost[3];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ nbpacket = lgw_receive(cmdSettings_FromHost.cmd_data[0], &pkt_data[0]);
+ BufToHost[0] = 'b';
+ BufToHost[3] = ((nbpacket >= 0) ? ACK_OK : ACK_K0);
+ BufToHost[4] = nbpacket;
+ for (j = 0; j < nbpacket; j++) {
+ for (i = 0; i < (pkt_data[j].size + (sizeatomic - 256)); i++) {
+ BufToHost[5 + i + pt] = *((uint8_t *)(&pkt_data[j]) + i);
+ cptalc++;
+ }
+ pt = cptalc;
+ }
+ cptalc = cptalc + 1; // + 1 for nbpacket
+ BufToHost[1] = (uint8_t)((cptalc >> 8) & 0xFF);
+ BufToHost[2] = (uint8_t)((cptalc >> 0) & 0xFF);
+ return(CMD_OK);
+ }
+ case 'c': { // lgw_rxrf_setconf
+ uint8_t rf_chain;
+ uint8_t conf[20];
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ rf_chain = BufFromHost[3];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ conf[i] = BufFromHost[4 + i];
+ }
+ x = lgw_rxrf_setconf(rf_chain, *(lgw_conf_rxrf_s *)conf);
+ BufToHost[0] = 'c';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ((x == 0) ? ACK_OK : ACK_K0);
+ return(CMD_OK);
+ }
+ case 'h': { // lgw_txgain_setconf
+ uint8_t conf[(LGW_MULTI_NB * TX_GAIN_LUT_SIZE_MAX) + 4];
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ conf[i] = BufFromHost[4 + i];
+ }
+ x = lgw_txgain_setconf((lgw_tx_gain_lut_s *)conf);
+ BufToHost[0] = 'h';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ((x == 0) ? ACK_OK : ACK_K0);
+ return(CMD_OK);
+ }
+ case 'd': { // lgw_rxif_setconf
+ uint8_t if_chain;
+ uint8_t conf[(sizeof(struct lgw_conf_rxif_s) / sizeof(uint8_t))];
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ if_chain = BufFromHost[3];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ conf[i] = BufFromHost[4 + i];
+ }
+ x = lgw_rxif_setconf(if_chain, *(lgw_conf_rxif_s *)conf);
+ BufToHost[0] = 'd';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ((x == 0) ? ACK_OK : ACK_K0);
+ return(CMD_OK);
+ }
+ case 'f': { // lgw_send
+ uint32_t count_us;
+ int32_t txcontinuous;
+ uint8_t conf[(sizeof(struct lgw_pkt_tx_s) / sizeof(uint8_t))];
+ Timer timer_tx_timeout;
+
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ conf[i] = BufFromHost[4 + i];
+ }
+
+ /* Switch off SX1308 correlators to reduce power consumption during transmit */
+#ifdef V2
+ HSCLKEN = 0;
+#else
+ lgw_reg_w(LGW_CLKHS_EN, 0);
+#endif
+
+ /* Send packet */
+ Sx1308.txongoing = 1;
+ Sx1308.waittxend = 1;
+ x = lgw_send(*(lgw_pkt_tx_s *)conf);
+ if (x < 0) {
+ //pc.printf("lgw_send() failed\n");
+ }
+
+ /* In case of TX continuous, return the answer immediatly */
+ lgw_reg_r(LGW_TX_MODE, &txcontinuous); // to switch off the timeout in case of tx continuous
+ if (txcontinuous == 1) {
+ BufToHost[0] = 'f';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_OK;
+ return(CMD_OK);
+ }
+
+ /* Wait for TX_DONE interrupt, or 10 seconds timeout */
+ timer_tx_timeout.reset();
+ timer_tx_timeout.start();
+ while (Sx1308.waittxend && (timer_tx_timeout.read() < (float)10.0)) {
+ }
+ timer_tx_timeout.stop();
+
+ /* Align SX1308 internal counter and STM32 counter */
+ if (Sx1308.firsttx == true) {
+ lgw_get_trigcnt(&count_us);
+ Sx1308.offtmstpstm32ref = (Sx1308.timerstm32ref.read_us() - count_us) + 60;
+ Sx1308.firsttx = false;
+ }
+
+ /* reset Sx1308 */
+ Sx1308.dig_reset();
+
+ /* Switch SX1308 correlators back on */
+#ifdef V2
+ HSCLKEN = 1;
+#else
+ lgw_reg_w(LGW_CLKHS_EN, 1);
+#endif
+
+ /* restart SX1308 */
+ x = lgw_start();
+ if (x < 0) {
+ //pc.printf("lgw_start() failed\n");
+ }
+
+ /* Send command answer */
+ BufToHost[0] = 'f';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ((x == 0) ? ACK_OK : ACK_K0);
+
+ return(CMD_OK);
+ }
+ case 'q': { // lgw_get_trigcnt
+ uint32_t timestamp;
+ x = lgw_get_trigcnt(×tamp);
+ timestamp += Sx1308.offtmstpstm32;
+ BufToHost[0] = 'q';
+ BufToHost[1] = 0;
+ BufToHost[2] = 4;
+ BufToHost[3] = ((x == 0) ? ACK_OK : ACK_K0);
+ BufToHost[4] = (uint8_t)(timestamp >> 24);
+ BufToHost[5] = (uint8_t)((timestamp & 0x00FF0000) >> 16);
+ BufToHost[6] = (uint8_t)((timestamp & 0x0000FF00) >> 8);
+ BufToHost[7] = (uint8_t)((timestamp & 0x000000FF));
+ return(CMD_OK);
+ }
+ case 'i': { // lgw_board_setconf
+ uint8_t conf[(sizeof(struct lgw_conf_board_s) / sizeof(uint8_t))];
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ conf[i] = BufFromHost[4 + i];
+ }
+
+ x = lgw_board_setconf(*(lgw_conf_board_s *)conf);
+ BufToHost[0] = 'i';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ((x == 0) ? ACK_OK : ACK_K0);
+ return(CMD_OK);
+ }
+ case 'j': { // lgw_calibration_snapshot
+ lgw_calibration_offset_transfer(BufFromHost[4], BufFromHost[5]);
+ BufToHost[0] = 'j';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_OK;
+ return(CMD_OK);
+ }
+ case 'l': { // lgw_mcu_commit_radio_calibration
+ int fwfromhost;
+ cmdSettings_FromHost.len_msb = BufFromHost[1];
+ cmdSettings_FromHost.len_lsb = BufFromHost[2];
+ for (i = 0; i < cmdSettings_FromHost.len_lsb + (cmdSettings_FromHost.len_msb << 8); i++) {
+ cmdSettings_FromHost.cmd_data[i] = BufFromHost[4 + i];
+ }
+ fwfromhost = (BufFromHost[4] << 24) + (BufFromHost[5] << 16) + (BufFromHost[6] << 8) + (BufFromHost[7]);
+ BufToHost[0] = 'l';
+ BufToHost[1] = 0;
+ BufToHost[2] = 8;
+ if (fwfromhost == FWVERSION) {
+ BufToHost[3] = ACK_OK;
+ } else {
+ BufToHost[3] = ACK_K0;
+ }
+ BufToHost[4] = *(uint8_t *)0x1fff7a18; //unique STM32 register base adresse
+ BufToHost[5] = *(uint8_t *)0x1fff7a19;
+ BufToHost[6] = *(uint8_t *)0x1fff7a1a;
+ BufToHost[7] = *(uint8_t *)0x1fff7a1b;
+ BufToHost[8] = *(uint8_t *)0x1fff7a10;
+ BufToHost[9] = *(uint8_t *)0x1fff7a11;
+ BufToHost[10] = *(uint8_t *)0x1fff7a12;
+ BufToHost[11] = *(uint8_t *)0x1fff7a13;
+ return(CMD_OK);
+ }
+ case 'm': { // Reset SX1308 and STM32
+ /* reset SX1308 */
+ lgw_soft_reset();
+ /* Prepare command answer */
+ BufToHost[0] = 'm';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_OK;
+ /* Indicate that STM32 reset has to be triggered */
+ kill = true;
+ return(CMD_OK);
+ }
+ case 'n': { // Jump to bootloader to allow reflashing (DFU, UART bootloader...)
+ FLASH_Prog(DATA_EEPROM_BASE, GOTO_BOOTLOADER);
+ BufToHost[0] = 'n';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_OK;
+ kill = true;
+ return(CMD_OK);
+ }
+ default:
+ BufToHost[0] = 'k';
+ BufToHost[1] = 0;
+ BufToHost[2] = 0;
+ BufToHost[3] = ACK_K0;
+ return(CMD_K0);
+ }
+}
+
+bool CMDMANAGER::CheckCmd(char id) {
+ switch (id) {
+ case 'r': /* read register */
+ case 's': /* read burst - first chunk */
+ case 't': /* read burst - middle chunk */
+ case 'u': /* read burst - end chunk */
+ case 'p': /* read burst - atomic */
+ case 'w': /* write register */
+ case 'x': /* write burst - first chunk */
+ case 'y': /* write burst - middle chunk */
+ case 'z': /* write burst - end chunk */
+ case 'a': /* write burst - atomic */
+ case 'b': /* lgw_receive */
+ case 'c': /* lgw_rxrf_setconf */
+ case 'd': /* lgw_rxif_setconf */
+ case 'f': /* lgw_send */
+ case 'h': /* lgw_txgain_setconf */
+ case 'q': /* lgw_get_trigcnt */
+ case 'i': /* lgw_board_setconf */
+ case 'j': /* lgw_mcu_commit_radio_calibration */
+ case 'l': /* lgw_check_fw_version */
+ case 'm': /* reset STM32 */
+ case 'n': /* Go to Bootloader */
+ return true;
+ default:
+ return false;
+ }
+}
+
+int CMDMANAGER::Convert2charsToByte(uint8_t a, uint8_t b) {
+ if (a > 96) {
+ a = a - 87;
+ } else {
+ a = a - 48;
+ }
+ if (b > 96) {
+ b = b - 87;
+ } else {
+ b = b - 48;
+ }
+ return(b + (a << 4));
+}
diff -r 000000000000 -r c76361bd82e8 src/MAIN/cmdUSB.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/MAIN/cmdUSB.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,110 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech
+*/
+
+#ifndef USBMANAGER_H
+#define USBMANAGER_H
+
+#include "mbed.h"
+#include "SX1308.h"
+
+#define ATOMICTX 900
+#define ATOMICRX 600
+
+#define CMD_HEADER_RX_SIZE 4 /* id + len_msb + len_lsb + address */
+#define CMD_HEADER_TX_SIZE 4 /* id + len_msb + len_lsb + status */
+
+#define CMD_DATA_RX_SIZE ATOMICRX
+#define CMD_DATA_TX_SIZE (1024 + 16 * 44) /* MAX_FIFO + 16 * METADATA_SIZE_ALIGNED */
+#define CMD_LENGTH_MSB 1
+#define CMD_LENGTH_LSB 2
+
+#define CMD_ERROR 0
+#define CMD_OK 1
+#define CMD_K0 0
+#define ACK_OK 1
+#define ACK_K0 0
+#define FWVERSION 0x010a0006
+#define ISUARTINTERFACE 1
+#define ISUSBINTERFACE 0
+
+#define BAUDRATE 115200
+
+typedef struct {
+ char id;
+ uint8_t len_msb;
+ uint8_t len_lsb;
+ uint8_t address;
+ uint8_t cmd_data[CMD_DATA_RX_SIZE];
+} CmdSettings_t;
+
+
+class INTERFACE {
+
+public:
+ INTERFACE();
+ virtual void Init() =0;
+ virtual void Receive(uint8_t* Buffer, uint32_t* size) = 0;
+ virtual void Transmit(uint8_t* Buffer, uint16_t size) = 0;
+private:
+
+};
+
+class COMUSB : INTERFACE {
+public:
+ // public methods
+ COMUSB();
+ virtual void Init();
+ virtual void Receive(uint8_t* Buffer, uint32_t* size);
+ virtual void Transmit(uint8_t* Buffer, uint16_t size);
+private:
+ // private methods
+};
+
+class COMUART : public Serial, public INTERFACE{
+
+public:
+ // public members
+ COMUART(PinName Tx, PinName Rx);
+ virtual void Init();
+ virtual void Receive(uint8_t* Buffer, uint32_t* size);
+ virtual void Transmit(uint8_t* Buffer, uint16_t size);
+private:
+ // private methods
+};
+
+class CMDMANAGER {
+
+public:
+ // public members
+ uint8_t BufFromHost[CMD_DATA_RX_SIZE + CMD_HEADER_RX_SIZE];
+ uint8_t BufFromHostChunk[64];
+ uint8_t BufToHost[CMD_DATA_TX_SIZE + CMD_HEADER_TX_SIZE];
+ uint32_t receivelength[5];
+ volatile uint32_t count;
+ int ActiveCom;
+ bool kill;
+ INTERFACE * ActiveInterface;
+
+ // public methods
+ CMDMANAGER(PinName Tx, PinName Rx);
+ void Init();
+ void ReceiveCmd();
+ void TransmitCmd();
+ void InitBufFromHost();
+ void InitBufToHost();
+ int DecodeCmd();
+ bool CheckCmd(char id);
+
+private:
+ // private methods
+ int Convert2charsToByte(uint8_t a, uint8_t b);
+};
+
+extern CMDMANAGER CmdManager;
+#endif
diff -r 000000000000 -r c76361bd82e8 src/MAIN/main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/MAIN/main.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,62 @@
+/*
+ / ____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech
+
+*/
+
+#include "mbed.h"
+#include "usb_device.h"
+#include "usbd_cdc_if.h"
+#include "string.h"
+#include "CmdUSB.h"
+#include "board.h"
+
+#include "loragw_reg.h"
+
+CMDMANAGER CmdManager(PA_9, PA_10);
+
+void Error_Handler(void);
+
+#if DEBUG_MAIN == 1
+#define DEBUG_MSG(str) pc.printf(str)
+#define DEBUG_PRINTF(fmt, args...) pc.printf("%s:%d: "fmt, __FUNCTION__, __LINE__, args)
+#define DEBUG_ARRAY(a,b,c) for(a=0;a!=0;){}
+#define CHECK_NULL(a) if(a==NULL){return LGW_HAL_ERROR;}
+#else
+#define DEBUG_MSG(str)
+#define DEBUG_PRINTF(fmt, args...)
+#define DEBUG_ARRAY(a,b,c) for(a=0;a!=0;){}
+#define CHECK_NULL(a) if(a==NULL){return LGW_HAL_ERROR;}
+#endif
+
+void Error_Handler(void) {
+ DEBUG_MSG("error\n");
+}
+
+int main(void) {
+
+ uint8_t dataflash;
+
+ /* Check if it is requested to jump to the bootloader (for reflashing...) */
+ dataflash = *(uint8_t *)DATA_EEPROM_BASE;
+ if (dataflash == GOTO_BOOTLOADER) {
+ FLASH_Prog(DATA_EEPROM_BASE, 0xFF);
+ ((void (*)(void)) * ((uint32_t*) BOOTLOADER_ADDR))();
+ }
+
+ /* Initialize the concentrator */
+ lgw_connect();
+ CmdManager.Init();
+
+ /* Wait for commands coming from host */
+ while (1) {
+ CmdManager.ReceiveCmd();
+ if (CmdManager.DecodeCmd()) {
+ CmdManager.TransmitCmd();
+ }
+ }
+}
diff -r 000000000000 -r c76361bd82e8 src/Pico.cpdsc --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/Pico.cpdsc Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,423 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<package xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="PACK.xsd"> + + <vendor>Keil</vendor> + + <name>Pico</name> + + <description>Generated by µVision V5.21.1.0</description> + + <url>www.keil.com</url> + + <releases> + <release version="5.21.1.0">Generated 2016-10-31T16:22:09</release> + </releases> + + <requirements> + <languages> + <language name="C" version="99"/> + </languages> + </requirements> + + <create> + <project> + <target Dendian="Little-endian" Dfpu="SP_FPU" Dname="STM32F401RETx" Dvendor="STMicroelectronics:13"> + <output debug="1" name="Pgw" type="exe"/> + <debugProbe coreClock="10000000" name="ST-Link" protocol="swd"/> + <memory access="rx" default="1" name="IROM1" size="0x80000" start="0x0" startup="1"/> + <memory access="rw" default="1" init="1" name="IRAM1" size="0x8000" start="0x10000000"/> + <memory access="rw" default="0" init="1" name="IRAM2" size="0x8000" start="0x2007c000"/> + </target> + <files> + <group name="TARGET_NUCLEO_F401RE"> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.h"/> + <file category="header" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h"/> + <file category="header" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c"/> + <file category="header" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h"/> + <file category="header" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f401xc.h"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx.h"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.h"/> + </group> + <group name="TARGET_STM32F4"> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/can_api.c"/> + <file category="header" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/common_objects.h"/> + <file category="header" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/device.h"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/entropy_hardware_poll.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c"/> + <file category="header" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_object.h"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c"/> + <file category="header" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/PeripheralPins.h"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32_hal_legacy.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.h"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_conf_template.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.h"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_def.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.h"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_msp_template.c"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.h"/> + <file category="sourceC" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.c"/> + <file category="header" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.h"/> + <file category="sourceC" name="mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c"/> + </group> + <group name="TOOLCHAIN_ARM_STD"> + <file category="sourceAsm" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.S"/> + <file category="sourceCpp" name="mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.cpp"/> + </group> + <group name="api"> + <file category="header" name="mbed-dev/api/AnalogIn.h"/> + <file category="header" name="mbed-dev/api/AnalogOut.h"/> + <file category="header" name="mbed-dev/api/BusIn.h"/> + <file category="header" name="mbed-dev/api/BusInOut.h"/> + <file category="header" name="mbed-dev/api/BusOut.h"/> + <file category="header" name="mbed-dev/api/Callback.h"/> + <file category="header" name="mbed-dev/api/CallChain.h"/> + <file category="header" name="mbed-dev/api/CAN.h"/> + <file category="header" name="mbed-dev/api/can_helper.h"/> + <file category="header" name="mbed-dev/api/CircularBuffer.h"/> + <file category="header" name="mbed-dev/api/critical.h"/> + <file category="header" name="mbed-dev/api/CThunk.h"/> + <file category="header" name="mbed-dev/api/DigitalIn.h"/> + <file category="header" name="mbed-dev/api/DigitalInOut.h"/> + <file category="header" name="mbed-dev/api/DigitalOut.h"/> + <file category="header" name="mbed-dev/api/DirHandle.h"/> + <file category="header" name="mbed-dev/api/Ethernet.h"/> + <file category="header" name="mbed-dev/api/FileBase.h"/> + <file category="header" name="mbed-dev/api/FileHandle.h"/> + <file category="header" name="mbed-dev/api/FileLike.h"/> + <file category="header" name="mbed-dev/api/FilePath.h"/> + <file category="header" name="mbed-dev/api/FileSystemLike.h"/> + <file category="header" name="mbed-dev/api/FunctionPointer.h"/> + <file category="header" name="mbed-dev/api/I2C.h"/> + <file category="header" name="mbed-dev/api/I2CSlave.h"/> + <file category="header" name="mbed-dev/api/InterruptIn.h"/> + <file category="header" name="mbed-dev/api/InterruptManager.h"/> + <file category="header" name="mbed-dev/api/LocalFileSystem.h"/> + <file category="header" name="mbed-dev/api/LowPowerTicker.h"/> + <file category="header" name="mbed-dev/api/LowPowerTimeout.h"/> + <file category="header" name="mbed-dev/api/LowPowerTimer.h"/> + <file category="header" name="mbed-dev/api/mbed.h"/> + <file category="header" name="mbed-dev/api/mbed_assert.h"/> + <file category="header" name="mbed-dev/api/mbed_debug.h"/> + <file category="header" name="mbed-dev/api/mbed_error.h"/> + <file category="header" name="mbed-dev/api/mbed_interface.h"/> + <file category="header" name="mbed-dev/api/mbed_mem_trace.h"/> + <file category="header" name="mbed-dev/api/mbed_stats.h"/> + <file category="header" name="mbed-dev/api/platform.h"/> + <file category="header" name="mbed-dev/api/PlatformMutex.h"/> + <file category="header" name="mbed-dev/api/PortIn.h"/> + <file category="header" name="mbed-dev/api/PortInOut.h"/> + <file category="header" name="mbed-dev/api/PortOut.h"/> + <file category="header" name="mbed-dev/api/PwmOut.h"/> + <file category="header" name="mbed-dev/api/RawSerial.h"/> + <file category="header" name="mbed-dev/api/rtc_time.h"/> + <file category="header" name="mbed-dev/api/semihost_api.h"/> + <file category="header" name="mbed-dev/api/Serial.h"/> + <file category="header" name="mbed-dev/api/SerialBase.h"/> + <file category="header" name="mbed-dev/api/SingletonPtr.h"/> + <file category="header" name="mbed-dev/api/SPI.h"/> + <file category="header" name="mbed-dev/api/SPISlave.h"/> + <file category="header" name="mbed-dev/api/Stream.h"/> + <file category="header" name="mbed-dev/api/Ticker.h"/> + <file category="header" name="mbed-dev/api/Timeout.h"/> + <file category="header" name="mbed-dev/api/Timer.h"/> + <file category="header" name="mbed-dev/api/TimerEvent.h"/> + <file category="header" name="mbed-dev/api/toolchain.h"/> + <file category="header" name="mbed-dev/api/Transaction.h"/> + <file category="header" name="mbed-dev/api/wait_api.h"/> + </group> + <group name="cmsis"> + <file category="header" name="mbed-dev/targets/cmsis/arm_common_tables.h"/> + <file category="header" name="mbed-dev/targets/cmsis/arm_const_structs.h"/> + <file category="header" name="mbed-dev/targets/cmsis/arm_math.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_ca9.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_ca_mmu.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_caFunc.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_caInstr.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cm0.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cm0plus.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cm3.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cm4.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cm4_simd.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cm7.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cmFunc.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cmInstr.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cmSecureAccess.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_cmSimd.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_sc000.h"/> + <file category="header" name="mbed-dev/targets/cmsis/core_sc300.h"/> + </group> + <group name="common"> + <file category="sourceCpp" name="mbed-dev/common/AnalogIn.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/BusIn.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/BusInOut.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/BusOut.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/CallChain.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/CAN.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/Ethernet.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/FileBase.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/FileLike.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/FilePath.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/FileSystemLike.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/I2C.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/I2CSlave.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/InterruptIn.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/InterruptManager.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/LocalFileSystem.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/mbed_alloc_wrappers.cpp"/> + <file category="sourceC" name="mbed-dev/common/mbed_assert.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_board.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_critical.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_error.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_gpio.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_interface.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_lp_ticker_api.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_mem_trace.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_pinmap_common.c"/> + <file category="sourceCpp" name="mbed-dev/common/mbed_rtc_time.cpp"/> + <file category="sourceC" name="mbed-dev/common/mbed_semihost_api.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_ticker_api.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_us_ticker_api.c"/> + <file category="sourceC" name="mbed-dev/common/mbed_wait_api.c"/> + <file category="sourceCpp" name="mbed-dev/common/RawSerial.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/retarget.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/Serial.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/SerialBase.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/SPI.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/SPISlave.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/Stream.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/Ticker.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/Timeout.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/Timer.cpp"/> + <file category="sourceCpp" name="mbed-dev/common/TimerEvent.cpp"/> + </group> + <group name="hal"> + <file category="header" name="mbed-dev/hal/analogin_api.h"/> + <file category="header" name="mbed-dev/hal/analogout_api.h"/> + <file category="header" name="mbed-dev/hal/buffer.h"/> + <file category="header" name="mbed-dev/hal/can_api.h"/> + <file category="header" name="mbed-dev/hal/dma_api.h"/> + <file category="header" name="mbed-dev/hal/ethernet_api.h"/> + <file category="header" name="mbed-dev/hal/gpio_api.h"/> + <file category="header" name="mbed-dev/hal/gpio_irq_api.h"/> + <file category="header" name="mbed-dev/hal/i2c_api.h"/> + <file category="header" name="mbed-dev/hal/lp_ticker_api.h"/> + <file category="header" name="mbed-dev/hal/pinmap.h"/> + <file category="header" name="mbed-dev/hal/port_api.h"/> + <file category="header" name="mbed-dev/hal/pwmout_api.h"/> + <file category="header" name="mbed-dev/hal/rtc_api.h"/> + <file category="header" name="mbed-dev/hal/serial_api.h"/> + <file category="header" name="mbed-dev/hal/sleep_api.h"/> + <file category="header" name="mbed-dev/hal/spi_api.h"/> + <file category="header" name="mbed-dev/hal/ticker_api.h"/> + <file category="header" name="mbed-dev/hal/us_ticker_api.h"/> + </group> + <group name="mbed"> + <file category="header" name="mbed_config.h"/> + </group> + <group name="storage_abstraction"> + <file category="header" name="mbed-dev/hal/storage_abstraction/Driver_Common.h"/> + <file category="header" name="mbed-dev/hal/storage_abstraction/Driver_Storage.h"/> + </group> + <group name="USB"> + <file category="sourceCpp" name="../usb_test/Src/Src/stm32f4xx_it.cpp"/> + <file category="sourceCpp" name="../usb_test/Src/Src/usb_device.cpp"/> + <file category="sourceCpp" name="../usb_test/Src/Src/usbd_cdc_if.cpp"/> + <file category="sourceCpp" name="../usb_test/Src/Src/usbd_conf.cpp"/> + <file category="sourceCpp" name="../usb_test/Src/Src/usbd_desc.cpp"/> + <file category="header" name="../usb_test/Inc/Inc/mxconstants.h"/> + <file category="header" name="../usb_test/Inc/Inc/stm32f4xx_hal_conf.h"/> + <file category="header" name="../usb_test/Inc/Inc/stm32f4xx_it.h"/> + <file category="header" name="../usb_test/Inc/Inc/usb_device.h"/> + <file category="header" name="../usb_test/Inc/Inc/usbd_cdc_if.h"/> + <file category="header" name="../usb_test/Inc/Inc/usbd_conf.h"/> + <file category="header" name="../usb_test/Inc/Inc/usbd_desc.h"/> + </group> + <group name="MiddlewareUSB"> + <file category="header" name="../usb_test/Middlewares/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h"/> + <file category="sourceCpp" name="../usb_test/Middlewares/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.cpp"/> + <file category="header" name="../usb_test/Middlewares/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h"/> + <file category="header" name="../usb_test/Middlewares/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h"/> + <file category="header" name="../usb_test/Middlewares/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h"/> + <file category="header" name="../usb_test/Middlewares/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h"/> + <file category="sourceCpp" name="../usb_test/Middlewares/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.cpp"/> + <file category="sourceCpp" name="../usb_test/Middlewares/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.cpp"/> + <file category="sourceCpp" name="../usb_test/Middlewares/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.cpp"/> + </group> + <group name="SX1301"> + <file category="sourceCpp" name="./SX1301.cpp"/> + <file category="header" name="./SX1301.h"/> + <file category="header" name="./Registers1301.h"/> + </group> + <group name="CmdUSB"> + <file category="sourceCpp" name="./CmdUSB.cpp"/> + <file category="header" name="./CmdUSB.h"/> + </group> + <group name="MAIN"> + <file category="sourceCpp" name="../usb_test/main.cpp"/> + </group> + <group name="HALsX1301sRC"> + <file category="sourceCpp" name="./SX1301HAL/src/loragw_hal.cpp"/> + <file category="sourceCpp" name="./loragw_reg_pgw.cpp"/> + </group> + <group name="HALsX1301iNC"> + <file category="header" name="./SX1301HAL/inc/loragw_aux.h"/> + <file category="header" name="./SX1301HAL/inc/loragw_fpga.h"/> + <file category="header" name="./SX1301HAL/inc/loragw_gps.h"/> + <file category="header" name="./SX1301HAL/inc/loragw_hal.h"/> + <file category="header" name="./SX1301HAL/inc/loragw_lbt.h"/> + <file category="header" name="./SX1301HAL/inc/loragw_radio.h"/> + <file category="header" name="./SX1301HAL/inc/loragw_reg.h"/> + </group> + </files> + </project> + </create> + +</package>
diff -r 000000000000 -r c76361bd82e8 src/SX1308HAL/inc/loragw_hal.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/SX1308HAL/inc/loragw_hal.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,380 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech-Cycleo
+
+Description:
+ LoRa concentrator Hardware Abstraction Layer
+
+License: Revised BSD License, see LICENSE.TXT file include in the project
+
+*/
+
+
+#ifndef _LORAGW_HAL_H
+#define _LORAGW_HAL_H
+
+/* -------------------------------------------------------------------------- */
+/* --- DEPENDANCIES --------------------------------------------------------- */
+
+#include <stdint.h> /* C99 types */
+#include <stdbool.h> /* bool type */
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC MACROS -------------------------------------------------------- */
+
+#define IS_LORA_BW(bw) ((bw == BW_125KHZ) || (bw == BW_250KHZ) || (bw == BW_500KHZ))
+#define IS_LORA_STD_DR(dr) ((dr == DR_LORA_SF7) || (dr == DR_LORA_SF8) || (dr == DR_LORA_SF9) || (dr == DR_LORA_SF10) || (dr == DR_LORA_SF11) || (dr == DR_LORA_SF12))
+#define IS_LORA_MULTI_DR(dr) ((dr & ~DR_LORA_MULTI) == 0) /* ones outside of DR_LORA_MULTI bitmask -> not a combination of LoRa datarates */
+#define IS_LORA_CR(cr) ((cr == CR_LORA_4_5) || (cr == CR_LORA_4_6) || (cr == CR_LORA_4_7) || (cr == CR_LORA_4_8))
+
+#define IS_FSK_BW(bw) ((bw >= 1) && (bw <= 7))
+#define IS_FSK_DR(dr) ((dr >= DR_FSK_MIN) && (dr <= DR_FSK_MAX))
+
+#define IS_TX_MODE(mode) ((mode == IMMEDIATE) || (mode == TIMESTAMPED) || (mode == ON_GPS))
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC CONSTANTS ----------------------------------------------------- */
+
+/* return status code */
+#define LGW_HAL_SUCCESS 0
+#define LGW_HAL_ERROR -1
+
+/* radio-specific parameters */
+#define LGW_XTAL_FREQU 32000000 /* frequency of the RF reference oscillator */
+#define LGW_RF_CHAIN_NB 2 /* number of RF chains */
+#define LGW_RF_RX_BANDWIDTH {1000000, 1000000} /* bandwidth of the radios */
+
+/* type of if_chain + modem */
+#define IF_UNDEFINED 0
+#define IF_LORA_STD 0x10 /* if + standard single-SF LoRa modem */
+#define IF_LORA_MULTI 0x11 /* if + LoRa receiver with multi-SF capability */
+#define IF_FSK_STD 0x20 /* if + standard FSK modem */
+
+/* concentrator chipset-specific parameters */
+/* to use array parameters, declare a local const and use 'if_chain' as index */
+#define LGW_IF_CHAIN_NB 10 /* number of IF+modem RX chains */
+#define LGW_PKT_FIFO_SIZE 16 /* depth of the RX packet FIFO */
+#define LGW_DATABUFF_SIZE 1024 /* size in bytes of the RX data buffer (contains payload & metadata) */
+#define LGW_REF_BW 125000 /* typical bandwidth of data channel */
+#define LGW_MULTI_NB 8 /* number of LoRa 'multi SF' chains */
+#define LGW_IFMODEM_CONFIG {\
+ IF_LORA_MULTI, \
+ IF_LORA_MULTI, \
+ IF_LORA_MULTI, \
+ IF_LORA_MULTI, \
+ IF_LORA_MULTI, \
+ IF_LORA_MULTI, \
+ IF_LORA_MULTI, \
+ IF_LORA_MULTI, \
+ IF_LORA_STD, \
+ IF_FSK_STD } /* configuration of available IF chains and modems on the hardware */
+
+/* values available for the 'modulation' parameters */
+/* NOTE: arbitrary values */
+#define MOD_UNDEFINED 0
+#define MOD_LORA 0x10
+#define MOD_FSK 0x20
+
+/* values available for the 'bandwidth' parameters (LoRa & FSK) */
+/* NOTE: directly encode FSK RX bandwidth, do not change */
+#define BW_UNDEFINED 0
+#define BW_500KHZ 0x01
+#define BW_250KHZ 0x02
+#define BW_125KHZ 0x03
+#define BW_62K5HZ 0x04
+#define BW_31K2HZ 0x05
+#define BW_15K6HZ 0x06
+#define BW_7K8HZ 0x07
+
+/* values available for the 'datarate' parameters */
+/* NOTE: LoRa values used directly to code SF bitmask in 'multi' modem, do not change */
+#define DR_UNDEFINED 0
+#define DR_LORA_SF7 0x02
+#define DR_LORA_SF8 0x04
+#define DR_LORA_SF9 0x08
+#define DR_LORA_SF10 0x10
+#define DR_LORA_SF11 0x20
+#define DR_LORA_SF12 0x40
+#define DR_LORA_MULTI 0x7E
+/* NOTE: for FSK directly use baudrate between 500 bauds and 250 kbauds */
+#define DR_FSK_MIN 500
+#define DR_FSK_MAX 250000
+
+/* values available for the 'coderate' parameters (LoRa only) */
+/* NOTE: arbitrary values */
+#define CR_UNDEFINED 0
+#define CR_LORA_4_5 0x01
+#define CR_LORA_4_6 0x02
+#define CR_LORA_4_7 0x03
+#define CR_LORA_4_8 0x04
+
+/* values available for the 'status' parameter */
+/* NOTE: values according to hardware specification */
+#define STAT_UNDEFINED 0x00
+#define STAT_NO_CRC 0x01
+#define STAT_CRC_BAD 0x11
+#define STAT_CRC_OK 0x10
+
+/* values available for the 'tx_mode' parameter */
+#define IMMEDIATE 0
+#define TIMESTAMPED 1
+#define ON_GPS 2
+//#define ON_EVENT 3
+//#define GPS_DELAYED 4
+//#define EVENT_DELAYED 5
+
+/* values available for 'select' in the status function */
+#define TX_STATUS 1
+#define RX_STATUS 2
+
+/* status code for TX_STATUS */
+/* NOTE: arbitrary values */
+#define TX_STATUS_UNKNOWN 0
+#define TX_OFF 1 /* TX modem disabled, it will ignore commands */
+#define TX_FREE 2 /* TX modem is free, ready to receive a command */
+#define TX_SCHEDULED 3 /* TX modem is loaded, ready to send the packet after an event and/or delay */
+#define TX_EMITTING 4 /* TX modem is emitting */
+
+/* status code for RX_STATUS */
+/* NOTE: arbitrary values */
+#define RX_STATUS_UNKNOWN 0
+#define RX_OFF 1 /* RX modem is disabled, it will ignore commands */
+#define RX_ON 2 /* RX modem is receiving */
+#define RX_SUSPENDED 3 /* RX is suspended while a TX is ongoing */
+
+/* Maximum size of Tx gain LUT */
+#define TX_GAIN_LUT_SIZE_MAX 16
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC TYPES --------------------------------------------------------- */
+
+/**
+@enum lgw_radio_type_e
+@brief Radio types that can be found on the LoRa Gateway
+*/
+enum lgw_radio_type_e {
+ LGW_RADIO_TYPE_NONE,
+ LGW_RADIO_TYPE_SX1255,
+ LGW_RADIO_TYPE_SX1257,
+ LGW_RADIO_TYPE_SX1272,
+ LGW_RADIO_TYPE_SX1276
+};
+
+/**
+@struct lgw_conf_board_s
+@brief Configuration structure for board specificities
+*/
+struct lgw_conf_board_s {
+ bool lorawan_public; /*!> Enable ONLY for *public* networks using the LoRa MAC protocol */
+ uint8_t clksrc; /*!> Index of RF chain which provides clock to concentrator */
+};
+
+/**
+@struct lgw_conf_rxrf_s
+@brief Configuration structure for a RF chain
+*/
+struct lgw_conf_rxrf_s {
+ bool enable; /*!> enable or disable that RF chain */
+ uint32_t freq_hz; /*!> center frequency of the radio in Hz */
+ float rssi_offset; /*!> Board-specific RSSI correction factor */
+ enum lgw_radio_type_e type; /*!> Radio type for that RF chain (SX1255, SX1257....) */
+ uint32_t tx_enable; /*!> enable or disable TX on that RF chain */
+};
+
+/**
+@struct lgw_conf_rxif_s
+@brief Configuration structure for an IF chain
+*/
+struct lgw_conf_rxif_s {
+ bool enable; /*!> enable or disable that IF chain */
+ uint8_t rf_chain; /*!> to which RF chain is that IF chain associated */
+ int32_t freq_hz; /*!> center frequ of the IF chain, relative to RF chain frequency */
+ uint8_t bandwidth; /*!> RX bandwidth, 0 for default */
+ uint32_t datarate; /*!> RX datarate, 0 for default */
+ uint8_t sync_word_size; /*!> size of FSK sync word (number of bytes, 0 for default) */
+ uint64_t sync_word; /*!> FSK sync word (ALIGN RIGHT, eg. 0xC194C1) */
+};
+
+/**
+@struct lgw_pkt_rx_s
+@brief Structure containing the metadata of a packet that was received and a pointer to the payload
+*/
+struct lgw_pkt_rx_s {
+ uint32_t freq_hz; /*!> central frequency of the IF chain */
+ uint8_t if_chain; /*!> by which IF chain was packet received */
+ uint8_t status; /*!> status of the received packet */
+ uint32_t count_us; /*!> internal concentrator counter for timestamping, 1 microsecond resolution */
+ uint8_t rf_chain; /*!> through which RF chain the packet was received */
+ uint8_t modulation; /*!> modulation used by the packet */
+ uint8_t bandwidth; /*!> modulation bandwidth (LoRa only) */
+ uint32_t datarate; /*!> RX datarate of the packet (SF for LoRa) */
+ uint8_t coderate; /*!> error-correcting code of the packet (LoRa only) */
+ float rssi; /*!> average packet RSSI in dB */
+ float snr; /*!> average packet SNR, in dB (LoRa only) */
+ float snr_min; /*!> minimum packet SNR, in dB (LoRa only) */
+ float snr_max; /*!> maximum packet SNR, in dB (LoRa only) */
+ uint16_t crc; /*!> CRC that was received in the payload */
+ uint16_t size; /*!> payload size in bytes */
+ uint8_t payload[256]; /*!> buffer containing the payload */
+};
+
+
+
+/**
+@struct lgw_pkt_tx_s
+@brief Structure containing the configuration of a packet to send and a pointer to the payload
+*/
+struct lgw_pkt_tx_s {
+ uint32_t freq_hz; /*!> center frequency of TX */
+ uint8_t tx_mode; /*!> select on what event/time the TX is triggered */
+ uint32_t count_us; /*!> timestamp or delay in microseconds for TX trigger */
+ uint8_t rf_chain; /*!> through which RF chain will the packet be sent */
+ int8_t rf_power; /*!> TX power, in dBm */
+ uint8_t modulation; /*!> modulation to use for the packet */
+ uint8_t bandwidth; /*!> modulation bandwidth (LoRa only) */
+ uint32_t datarate; /*!> TX datarate (baudrate for FSK, SF for LoRa) */
+ uint8_t coderate; /*!> error-correcting code of the packet (LoRa only) */
+ bool invert_pol; /*!> invert signal polarity, for orthogonal downlinks (LoRa only) */
+ uint8_t f_dev; /*!> frequency deviation, in kHz (FSK only) */
+ uint16_t preamble; /*!> set the preamble length, 0 for default */
+ bool no_crc; /*!> if true, do not send a CRC in the packet */
+ bool no_header; /*!> if true, enable implicit header mode (LoRa), fixed length (FSK) */
+ uint16_t size; /*!> payload size in bytes */
+ uint8_t payload[256]; /*!> buffer containing the payload */
+};
+
+/**
+@struct lgw_tx_gain_s
+@brief Structure containing all gains of Tx chain
+*/
+struct lgw_tx_gain_s {
+ uint8_t dig_gain; /*!> 2 bits, control of the digital gain of SX1308 */
+ uint8_t pa_gain; /*!> 2 bits, control of the external PA (SX1308 I/O) */
+ uint8_t dac_gain; /*!> 2 bits, control of the radio DAC */
+ uint8_t mix_gain; /*!> 4 bits, control of the radio mixer */
+ int8_t rf_power; /*!> measured TX power at the board connector, in dBm */
+};
+
+/**
+@struct lgw_tx_gain_lut_s
+@brief Structure defining the Tx gain LUT
+*/
+struct lgw_tx_gain_lut_s {
+ struct lgw_tx_gain_s lut[TX_GAIN_LUT_SIZE_MAX]; /*!> Array of Tx gain struct */
+ uint8_t size; /*!> Number of LUT indexes */
+};
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC FUNCTIONS PROTOTYPES ------------------------------------------ */
+
+/**
+@brief Configure the gateway board
+@param conf structure containing the configuration parameters
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+*/
+int lgw_board_setconf(struct lgw_conf_board_s conf);
+
+/**
+@brief Configure an RF chain (must configure before start)
+@param rf_chain number of the RF chain to configure [0, LGW_RF_CHAIN_NB - 1]
+@param conf structure containing the configuration parameters
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+*/
+int lgw_rxrf_setconf(uint8_t rf_chain, struct lgw_conf_rxrf_s conf);
+
+/**
+@brief Configure an IF chain + modem (must configure before start)
+@param if_chain number of the IF chain + modem to configure [0, LGW_IF_CHAIN_NB - 1]
+@param conf structure containing the configuration parameters
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+*/
+int lgw_rxif_setconf(uint8_t if_chain, struct lgw_conf_rxif_s conf);
+
+/**
+@brief Configure the Tx gain LUT
+@param pointer to structure defining the LUT
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+*/
+int lgw_txgain_setconf(struct lgw_tx_gain_lut_s *conf);
+
+/**
+@brief Connect to the LoRa concentrator, reset it and configure it according to previously set parameters
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+*/
+int lgw_start(void);
+
+/**
+@brief Stop the LoRa concentrator and disconnect it
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+*/
+int lgw_stop(void);
+
+/**
+@brief A non-blocking function that will fetch up to 'max_pkt' packets from the LoRa concentrator FIFO and data buffer
+@param max_pkt maximum number of packet that must be retrieved (equal to the size of the array of struct)
+@param pkt_data pointer to an array of struct that will receive the packet metadata and payload pointers
+@return LGW_HAL_ERROR id the operation failed, else the number of packets retrieved
+*/
+int lgw_receive(uint8_t max_pkt, struct lgw_pkt_rx_s *pkt_data);
+
+/**
+@brief Schedule a packet to be send immediately or after a delay depending on tx_mode
+@param pkt_data structure containing the data and metadata for the packet to send
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+
+/!\ When sending a packet, there is a 1.5 ms delay for the analog circuitry to start and be stable (TX_START_DELAY).
+In 'timestamp' mode, this is transparent: the modem is started 1.5ms before the user-set timestamp value is reached, the preamble of the packet start right when the internal timestamp counter reach target value.
+In 'immediate' mode, the packet is emitted as soon as possible: transferring the packet (and its parameters) from the host to the concentrator takes some time, then there is the TX_START_DELAY, then the packet is emitted.
+In 'triggered' mode (aka PPS/GPS mode), the packet, typically a beacon, is emitted 1.5ms after a rising edge of the trigger signal. Because there is no way to anticipate the triggering event and start the analog circuitry beforehand, that delay must be taken into account in the protocol.
+*/
+int lgw_send(struct lgw_pkt_tx_s pkt_data);
+
+/**
+@brief Give the the status of different part of the LoRa concentrator
+@param select is used to select what status we want to know
+@param code is used to return the status code
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+*/
+int lgw_status(uint8_t select, uint8_t *code);
+
+/**
+@brief Abort a currently scheduled or ongoing TX
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+*/
+int lgw_abort_tx(void);
+
+/**
+@brief Return value of internal counter when latest event (eg GPS pulse) was captured
+@param trig_cnt_us pointer to receive timestamp value
+@return LGW_HAL_ERROR id the operation failed, LGW_HAL_SUCCESS else
+*/
+int lgw_get_trigcnt(uint32_t* trig_cnt_us);
+
+/**
+@brief Allow user to check the version/options of the library once compiled
+@return pointer on a human-readable null terminated string
+*/
+const char* lgw_version_info(void);
+
+/**
+@brief Return time on air of given packet, in milliseconds
+@param packet is a pointer to the packet structure
+@return the packet time on air in milliseconds
+*/
+uint32_t lgw_time_on_air(struct lgw_pkt_tx_s *packet);
+
+/**
+@brief Transfer the calibration offsets from the AGC firwmare to the local array
+@param idx_start is the start index in the local array where the calibration offset are being copied
+@param idx_nb is the number of calibration offsets to be copied in the local array
+@return the packet time on air in milliseconds
+*/
+void lgw_calibration_offset_transfer(uint8_t idx_start, uint8_t idx_nb);
+
+#endif
+
+/* --- EOF ------------------------------------------------------------------ */
diff -r 000000000000 -r c76361bd82e8 src/SX1308HAL/inc/loragw_radio.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/SX1308HAL/inc/loragw_radio.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,73 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech-Cycleo
+
+Description:
+ Functions used to handle LoRa concentrator radios.
+
+License: Revised BSD License, see LICENSE.TXT file include in the project
+
+*/
+
+#ifndef _LORAGW_RADIO_H
+#define _LORAGW_RADIO_H
+
+/* -------------------------------------------------------------------------- */
+/* --- DEPENDANCIES --------------------------------------------------------- */
+
+#include <stdint.h> /* C99 types */
+#include <stdbool.h> /* bool type */
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC CONSTANTS ----------------------------------------------------- */
+
+#define LGW_REG_SUCCESS 0
+#define LGW_REG_ERROR -1
+
+#define SX125x_32MHz_FRAC 15625 /* irreductible fraction for PLL register caculation */
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC CONSTANTS ----------------------------------------------------- */
+
+enum lgw_sx127x_rxbw_e {
+ LGW_SX127X_RXBW_2K6_HZ,
+ LGW_SX127X_RXBW_3K1_HZ,
+ LGW_SX127X_RXBW_3K9_HZ,
+ LGW_SX127X_RXBW_5K2_HZ,
+ LGW_SX127X_RXBW_6K3_HZ,
+ LGW_SX127X_RXBW_7K8_HZ,
+ LGW_SX127X_RXBW_10K4_HZ,
+ LGW_SX127X_RXBW_12K5_HZ,
+ LGW_SX127X_RXBW_15K6_HZ,
+ LGW_SX127X_RXBW_20K8_HZ,
+ LGW_SX127X_RXBW_25K_HZ,
+ LGW_SX127X_RXBW_31K3_HZ,
+ LGW_SX127X_RXBW_41K7_HZ,
+ LGW_SX127X_RXBW_50K_HZ,
+ LGW_SX127X_RXBW_62K5_HZ,
+ LGW_SX127X_RXBW_83K3_HZ,
+ LGW_SX127X_RXBW_100K_HZ,
+ LGW_SX127X_RXBW_125K_HZ,
+ LGW_SX127X_RXBW_166K7_HZ,
+ LGW_SX127X_RXBW_200K_HZ,
+ LGW_SX127X_RXBW_250K_HZ
+};
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC FUNCTIONS PROTOTYPES ------------------------------------------ */
+
+int lgw_setup_sx125x(uint8_t rf_chain, uint8_t rf_clkout, bool rf_enable, uint8_t rf_radio_type, uint32_t freq_hz);
+
+int lgw_setup_sx127x(uint32_t frequency, uint8_t modulation, enum lgw_sx127x_rxbw_e rxbw_khz, int8_t rssi_offset);
+
+int lgw_sx127x_reg_w(uint8_t address, uint8_t reg_value);
+
+int lgw_sx127x_reg_r(uint8_t address, uint8_t *reg_value);
+
+
+#endif
+/* --- EOF ------------------------------------------------------------------ */
diff -r 000000000000 -r c76361bd82e8 src/SX1308HAL/inc/loragw_reg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/SX1308HAL/inc/loragw_reg.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,454 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech-Cycleo
+
+Description:
+ Functions used to handle a single LoRa concentrator.
+ Registers are addressed by name.
+ Multi-bytes registers are handled automatically.
+ Read-modify-write is handled automatically.
+
+
+*/
+
+
+#ifndef _LORAGW_REG_H
+#define _LORAGW_REG_H
+
+/* -------------------------------------------------------------------------- */
+/* --- DEPENDANCIES --------------------------------------------------------- */
+
+#include <stdint.h> /* C99 types */
+#include <stdbool.h> /* bool type */
+
+/* -------------------------------------------------------------------------- */
+/* --- INTERNAL SHARED TYPES ------------------------------------------------ */
+
+struct lgw_reg_s {
+ int8_t page; /*!< page containing the register (-1 for all pages) */
+ uint8_t addr; /*!< base address of the register (7 bit) */
+ uint8_t offs; /*!< position of the register LSB (between 0 to 7) */
+ bool sign; /*!< 1 indicates the register is signed (2 complem.) */
+ uint8_t leng; /*!< number of bits in the register */
+ bool rdon; /*!< 1 indicates a read-only register */
+ int32_t dflt; /*!< register default value */
+};
+
+/* -------------------------------------------------------------------------- */
+/* --- INTERNAL SHARED FUNCTIONS -------------------------------------------- */
+
+int reg_w_align32(void *spi_target, uint8_t spi_mux_mode, uint8_t spi_mux_target, struct lgw_reg_s r, int32_t reg_value);
+int reg_r_align32(void *spi_target, uint8_t spi_mux_mode, uint8_t spi_mux_target, struct lgw_reg_s r, int32_t *reg_value);
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC CONSTANTS ----------------------------------------------------- */
+
+#define LGW_REG_SUCCESS 0
+#define LGW_REG_ERROR -1
+
+/*
+auto generated register mapping for C code : 11-Jul-2013 13:20:40
+this file contains autogenerated C struct used to access the LORA registers
+this file is autogenerated from registers description
+293 registers are defined
+*/
+
+#define LGW_PAGE_REG 0
+#define LGW_SOFT_RESET 1
+#define LGW_VERSION 2
+#define LGW_RX_DATA_BUF_ADDR 3
+#define LGW_RX_DATA_BUF_DATA 4
+#define LGW_TX_DATA_BUF_ADDR 5
+#define LGW_TX_DATA_BUF_DATA 6
+#define LGW_CAPTURE_RAM_ADDR 7
+#define LGW_CAPTURE_RAM_DATA 8
+#define LGW_MCU_PROM_ADDR 9
+#define LGW_MCU_PROM_DATA 10
+#define LGW_RX_PACKET_DATA_FIFO_NUM_STORED 11
+#define LGW_RX_PACKET_DATA_FIFO_ADDR_POINTER 12
+#define LGW_RX_PACKET_DATA_FIFO_STATUS 13
+#define LGW_RX_PACKET_DATA_FIFO_PAYLOAD_SIZE 14
+#define LGW_MBWSSF_MODEM_ENABLE 15
+#define LGW_CONCENTRATOR_MODEM_ENABLE 16
+#define LGW_FSK_MODEM_ENABLE 17
+#define LGW_GLOBAL_EN 18
+#define LGW_CLK32M_EN 19
+#define LGW_CLKHS_EN 20
+#define LGW_START_BIST0 21
+#define LGW_START_BIST1 22
+#define LGW_CLEAR_BIST0 23
+#define LGW_CLEAR_BIST1 24
+#define LGW_BIST0_FINISHED 25
+#define LGW_BIST1_FINISHED 26
+#define LGW_MCU_AGC_PROG_RAM_BIST_STATUS 27
+#define LGW_MCU_ARB_PROG_RAM_BIST_STATUS 28
+#define LGW_CAPTURE_RAM_BIST_STATUS 29
+#define LGW_CHAN_FIR_RAM0_BIST_STATUS 30
+#define LGW_CHAN_FIR_RAM1_BIST_STATUS 31
+#define LGW_CORR0_RAM_BIST_STATUS 32
+#define LGW_CORR1_RAM_BIST_STATUS 33
+#define LGW_CORR2_RAM_BIST_STATUS 34
+#define LGW_CORR3_RAM_BIST_STATUS 35
+#define LGW_CORR4_RAM_BIST_STATUS 36
+#define LGW_CORR5_RAM_BIST_STATUS 37
+#define LGW_CORR6_RAM_BIST_STATUS 38
+#define LGW_CORR7_RAM_BIST_STATUS 39
+#define LGW_MODEM0_RAM0_BIST_STATUS 40
+#define LGW_MODEM1_RAM0_BIST_STATUS 41
+#define LGW_MODEM2_RAM0_BIST_STATUS 42
+#define LGW_MODEM3_RAM0_BIST_STATUS 43
+#define LGW_MODEM4_RAM0_BIST_STATUS 44
+#define LGW_MODEM5_RAM0_BIST_STATUS 45
+#define LGW_MODEM6_RAM0_BIST_STATUS 46
+#define LGW_MODEM7_RAM0_BIST_STATUS 47
+#define LGW_MODEM0_RAM1_BIST_STATUS 48
+#define LGW_MODEM1_RAM1_BIST_STATUS 49
+#define LGW_MODEM2_RAM1_BIST_STATUS 50
+#define LGW_MODEM3_RAM1_BIST_STATUS 51
+#define LGW_MODEM4_RAM1_BIST_STATUS 52
+#define LGW_MODEM5_RAM1_BIST_STATUS 53
+#define LGW_MODEM6_RAM1_BIST_STATUS 54
+#define LGW_MODEM7_RAM1_BIST_STATUS 55
+#define LGW_MODEM0_RAM2_BIST_STATUS 56
+#define LGW_MODEM1_RAM2_BIST_STATUS 57
+#define LGW_MODEM2_RAM2_BIST_STATUS 58
+#define LGW_MODEM3_RAM2_BIST_STATUS 59
+#define LGW_MODEM4_RAM2_BIST_STATUS 60
+#define LGW_MODEM5_RAM2_BIST_STATUS 61
+#define LGW_MODEM6_RAM2_BIST_STATUS 62
+#define LGW_MODEM7_RAM2_BIST_STATUS 63
+#define LGW_MODEM_MBWSSF_RAM0_BIST_STATUS 64
+#define LGW_MODEM_MBWSSF_RAM1_BIST_STATUS 65
+#define LGW_MODEM_MBWSSF_RAM2_BIST_STATUS 66
+#define LGW_MCU_AGC_DATA_RAM_BIST0_STATUS 67
+#define LGW_MCU_AGC_DATA_RAM_BIST1_STATUS 68
+#define LGW_MCU_ARB_DATA_RAM_BIST0_STATUS 69
+#define LGW_MCU_ARB_DATA_RAM_BIST1_STATUS 70
+#define LGW_TX_TOP_RAM_BIST0_STATUS 71
+#define LGW_TX_TOP_RAM_BIST1_STATUS 72
+#define LGW_DATA_MNGT_RAM_BIST0_STATUS 73
+#define LGW_DATA_MNGT_RAM_BIST1_STATUS 74
+#define LGW_GPIO_SELECT_INPUT 75
+#define LGW_GPIO_SELECT_OUTPUT 76
+#define LGW_GPIO_MODE 77
+#define LGW_GPIO_PIN_REG_IN 78
+#define LGW_GPIO_PIN_REG_OUT 79
+#define LGW_MCU_AGC_STATUS 80
+#define LGW_MCU_ARB_STATUS 81
+#define LGW_CHIP_ID 82
+#define LGW_EMERGENCY_FORCE_HOST_CTRL 83
+#define LGW_RX_INVERT_IQ 84
+#define LGW_MODEM_INVERT_IQ 85
+#define LGW_MBWSSF_MODEM_INVERT_IQ 86
+#define LGW_RX_EDGE_SELECT 87
+#define LGW_MISC_RADIO_EN 88
+#define LGW_FSK_MODEM_INVERT_IQ 89
+#define LGW_FILTER_GAIN 90
+#define LGW_RADIO_SELECT 91
+#define LGW_IF_FREQ_0 92
+#define LGW_IF_FREQ_1 93
+#define LGW_IF_FREQ_2 94
+#define LGW_IF_FREQ_3 95
+#define LGW_IF_FREQ_4 96
+#define LGW_IF_FREQ_5 97
+#define LGW_IF_FREQ_6 98
+#define LGW_IF_FREQ_7 99
+#define LGW_IF_FREQ_8 100
+#define LGW_IF_FREQ_9 101
+#define LGW_CHANN_OVERRIDE_AGC_GAIN 102
+#define LGW_CHANN_AGC_GAIN 103
+#define LGW_CORR0_DETECT_EN 104
+#define LGW_CORR1_DETECT_EN 105
+#define LGW_CORR2_DETECT_EN 106
+#define LGW_CORR3_DETECT_EN 107
+#define LGW_CORR4_DETECT_EN 108
+#define LGW_CORR5_DETECT_EN 109
+#define LGW_CORR6_DETECT_EN 110
+#define LGW_CORR7_DETECT_EN 111
+#define LGW_CORR_SAME_PEAKS_OPTION_SF6 112
+#define LGW_CORR_SAME_PEAKS_OPTION_SF7 113
+#define LGW_CORR_SAME_PEAKS_OPTION_SF8 114
+#define LGW_CORR_SAME_PEAKS_OPTION_SF9 115
+#define LGW_CORR_SAME_PEAKS_OPTION_SF10 116
+#define LGW_CORR_SAME_PEAKS_OPTION_SF11 117
+#define LGW_CORR_SAME_PEAKS_OPTION_SF12 118
+#define LGW_CORR_SIG_NOISE_RATIO_SF6 119
+#define LGW_CORR_SIG_NOISE_RATIO_SF7 120
+#define LGW_CORR_SIG_NOISE_RATIO_SF8 121
+#define LGW_CORR_SIG_NOISE_RATIO_SF9 122
+#define LGW_CORR_SIG_NOISE_RATIO_SF10 123
+#define LGW_CORR_SIG_NOISE_RATIO_SF11 124
+#define LGW_CORR_SIG_NOISE_RATIO_SF12 125
+#define LGW_CORR_NUM_SAME_PEAK 126
+#define LGW_CORR_MAC_GAIN 127
+#define LGW_ADJUST_MODEM_START_OFFSET_RDX4 128
+#define LGW_ADJUST_MODEM_START_OFFSET_SF12_RDX4 129
+#define LGW_DBG_CORR_SELECT_SF 130
+#define LGW_DBG_CORR_SELECT_CHANNEL 131
+#define LGW_DBG_DETECT_CPT 132
+#define LGW_DBG_SYMB_CPT 133
+#define LGW_CHIRP_INVERT_RX 134
+#define LGW_DC_NOTCH_EN 135
+#define LGW_IMPLICIT_CRC_EN 136
+#define LGW_IMPLICIT_CODING_RATE 137
+#define LGW_IMPLICIT_PAYLOAD_LENGHT 138
+#define LGW_FREQ_TO_TIME_INVERT 139
+#define LGW_FREQ_TO_TIME_DRIFT 140
+#define LGW_PAYLOAD_FINE_TIMING_GAIN 141
+#define LGW_PREAMBLE_FINE_TIMING_GAIN 142
+#define LGW_TRACKING_INTEGRAL 143
+#define LGW_FRAME_SYNCH_PEAK1_POS 144
+#define LGW_FRAME_SYNCH_PEAK2_POS 145
+#define LGW_PREAMBLE_SYMB1_NB 146
+#define LGW_FRAME_SYNCH_GAIN 147
+#define LGW_SYNCH_DETECT_TH 148
+#define LGW_LLR_SCALE 149
+#define LGW_SNR_AVG_CST 150
+#define LGW_PPM_OFFSET 151
+#define LGW_MAX_PAYLOAD_LEN 152
+#define LGW_ONLY_CRC_EN 153
+#define LGW_ZERO_PAD 154
+#define LGW_DEC_GAIN_OFFSET 155
+#define LGW_CHAN_GAIN_OFFSET 156
+#define LGW_FORCE_HOST_RADIO_CTRL 157
+#define LGW_FORCE_HOST_FE_CTRL 158
+#define LGW_FORCE_DEC_FILTER_GAIN 159
+#define LGW_MCU_RST_0 160
+#define LGW_MCU_RST_1 161
+#define LGW_MCU_SELECT_MUX_0 162
+#define LGW_MCU_SELECT_MUX_1 163
+#define LGW_MCU_CORRUPTION_DETECTED_0 164
+#define LGW_MCU_CORRUPTION_DETECTED_1 165
+#define LGW_MCU_SELECT_EDGE_0 166
+#define LGW_MCU_SELECT_EDGE_1 167
+#define LGW_CHANN_SELECT_RSSI 168
+#define LGW_RSSI_BB_DEFAULT_VALUE 169
+#define LGW_RSSI_DEC_DEFAULT_VALUE 170
+#define LGW_RSSI_CHANN_DEFAULT_VALUE 171
+#define LGW_RSSI_BB_FILTER_ALPHA 172
+#define LGW_RSSI_DEC_FILTER_ALPHA 173
+#define LGW_RSSI_CHANN_FILTER_ALPHA 174
+#define LGW_IQ_MISMATCH_A_AMP_COEFF 175
+#define LGW_IQ_MISMATCH_A_PHI_COEFF 176
+#define LGW_IQ_MISMATCH_B_AMP_COEFF 177
+#define LGW_IQ_MISMATCH_B_SEL_I 178
+#define LGW_IQ_MISMATCH_B_PHI_COEFF 179
+#define LGW_TX_TRIG_IMMEDIATE 180
+#define LGW_TX_TRIG_DELAYED 181
+#define LGW_TX_TRIG_GPS 182
+#define LGW_TX_START_DELAY 183
+#define LGW_TX_FRAME_SYNCH_PEAK1_POS 184
+#define LGW_TX_FRAME_SYNCH_PEAK2_POS 185
+#define LGW_TX_RAMP_DURATION 186
+#define LGW_TX_OFFSET_I 187
+#define LGW_TX_OFFSET_Q 188
+#define LGW_TX_MODE 189
+#define LGW_TX_ZERO_PAD 190
+#define LGW_TX_EDGE_SELECT 191
+#define LGW_TX_EDGE_SELECT_TOP 192
+#define LGW_TX_GAIN 193
+#define LGW_TX_CHIRP_LOW_PASS 194
+#define LGW_TX_FCC_WIDEBAND 195
+#define LGW_TX_SWAP_IQ 196
+#define LGW_MBWSSF_IMPLICIT_HEADER 197
+#define LGW_MBWSSF_IMPLICIT_CRC_EN 198
+#define LGW_MBWSSF_IMPLICIT_CODING_RATE 199
+#define LGW_MBWSSF_IMPLICIT_PAYLOAD_LENGHT 200
+#define LGW_MBWSSF_AGC_FREEZE_ON_DETECT 201
+#define LGW_MBWSSF_FRAME_SYNCH_PEAK1_POS 202
+#define LGW_MBWSSF_FRAME_SYNCH_PEAK2_POS 203
+#define LGW_MBWSSF_PREAMBLE_SYMB1_NB 204
+#define LGW_MBWSSF_FRAME_SYNCH_GAIN 205
+#define LGW_MBWSSF_SYNCH_DETECT_TH 206
+#define LGW_MBWSSF_DETECT_MIN_SINGLE_PEAK 207
+#define LGW_MBWSSF_DETECT_TRIG_SAME_PEAK_NB 208
+#define LGW_MBWSSF_FREQ_TO_TIME_INVERT 209
+#define LGW_MBWSSF_FREQ_TO_TIME_DRIFT 210
+#define LGW_MBWSSF_PPM_CORRECTION 211
+#define LGW_MBWSSF_PAYLOAD_FINE_TIMING_GAIN 212
+#define LGW_MBWSSF_PREAMBLE_FINE_TIMING_GAIN 213
+#define LGW_MBWSSF_TRACKING_INTEGRAL 214
+#define LGW_MBWSSF_ZERO_PAD 215
+#define LGW_MBWSSF_MODEM_BW 216
+#define LGW_MBWSSF_RADIO_SELECT 217
+#define LGW_MBWSSF_RX_CHIRP_INVERT 218
+#define LGW_MBWSSF_LLR_SCALE 219
+#define LGW_MBWSSF_SNR_AVG_CST 220
+#define LGW_MBWSSF_PPM_OFFSET 221
+#define LGW_MBWSSF_RATE_SF 222
+#define LGW_MBWSSF_ONLY_CRC_EN 223
+#define LGW_MBWSSF_MAX_PAYLOAD_LEN 224
+#define LGW_TX_STATUS 225
+#define LGW_FSK_CH_BW_EXPO 226
+#define LGW_FSK_RSSI_LENGTH 227
+#define LGW_FSK_RX_INVERT 228
+#define LGW_FSK_PKT_MODE 229
+#define LGW_FSK_PSIZE 230
+#define LGW_FSK_CRC_EN 231
+#define LGW_FSK_DCFREE_ENC 232
+#define LGW_FSK_CRC_IBM 233
+#define LGW_FSK_ERROR_OSR_TOL 234
+#define LGW_FSK_RADIO_SELECT 235
+#define LGW_FSK_BR_RATIO 236
+#define LGW_FSK_REF_PATTERN_LSB 237
+#define LGW_FSK_REF_PATTERN_MSB 238
+#define LGW_FSK_PKT_LENGTH 239
+#define LGW_FSK_TX_GAUSSIAN_EN 240
+#define LGW_FSK_TX_GAUSSIAN_SELECT_BT 241
+#define LGW_FSK_TX_PATTERN_EN 242
+#define LGW_FSK_TX_PREAMBLE_SEQ 243
+#define LGW_FSK_TX_PSIZE 244
+#define LGW_FSK_NODE_ADRS 245
+#define LGW_FSK_BROADCAST 246
+#define LGW_FSK_AUTO_AFC_ON 247
+#define LGW_FSK_PATTERN_TIMEOUT_CFG 248
+#define LGW_SPI_RADIO_A__DATA 249
+#define LGW_SPI_RADIO_A__DATA_READBACK 250
+#define LGW_SPI_RADIO_A__ADDR 251
+#define LGW_SPI_RADIO_A__CS 252
+#define LGW_SPI_RADIO_B__DATA 253
+#define LGW_SPI_RADIO_B__DATA_READBACK 254
+#define LGW_SPI_RADIO_B__ADDR 255
+#define LGW_SPI_RADIO_B__CS 256
+#define LGW_RADIO_A_EN 257
+#define LGW_RADIO_B_EN 258
+#define LGW_RADIO_RST 259
+#define LGW_LNA_A_EN 260
+#define LGW_PA_A_EN 261
+#define LGW_LNA_B_EN 262
+#define LGW_PA_B_EN 263
+#define LGW_PA_GAIN 264
+#define LGW_LNA_A_CTRL_LUT 265
+#define LGW_PA_A_CTRL_LUT 266
+#define LGW_LNA_B_CTRL_LUT 267
+#define LGW_PA_B_CTRL_LUT 268
+#define LGW_CAPTURE_SOURCE 269
+#define LGW_CAPTURE_START 270
+#define LGW_CAPTURE_FORCE_TRIGGER 271
+#define LGW_CAPTURE_WRAP 272
+#define LGW_CAPTURE_PERIOD 273
+#define LGW_MODEM_STATUS 274
+#define LGW_VALID_HEADER_COUNTER_0 275
+#define LGW_VALID_PACKET_COUNTER_0 276
+#define LGW_VALID_HEADER_COUNTER_MBWSSF 277
+#define LGW_VALID_HEADER_COUNTER_FSK 278
+#define LGW_VALID_PACKET_COUNTER_MBWSSF 279
+#define LGW_VALID_PACKET_COUNTER_FSK 280
+#define LGW_CHANN_RSSI 281
+#define LGW_BB_RSSI 282
+#define LGW_DEC_RSSI 283
+#define LGW_DBG_MCU_DATA 284
+#define LGW_DBG_ARB_MCU_RAM_DATA 285
+#define LGW_DBG_AGC_MCU_RAM_DATA 286
+#define LGW_NEXT_PACKET_CNT 287
+#define LGW_ADDR_CAPTURE_COUNT 288
+#define LGW_TIMESTAMP 289
+#define LGW_DBG_CHANN0_GAIN 290
+#define LGW_DBG_CHANN1_GAIN 291
+#define LGW_DBG_CHANN2_GAIN 292
+#define LGW_DBG_CHANN3_GAIN 293
+#define LGW_DBG_CHANN4_GAIN 294
+#define LGW_DBG_CHANN5_GAIN 295
+#define LGW_DBG_CHANN6_GAIN 296
+#define LGW_DBG_CHANN7_GAIN 297
+#define LGW_DBG_DEC_FILT_GAIN 298
+#define LGW_SPI_DATA_FIFO_PTR 299
+#define LGW_PACKET_DATA_FIFO_PTR 300
+#define LGW_DBG_ARB_MCU_RAM_ADDR 301
+#define LGW_DBG_AGC_MCU_RAM_ADDR 302
+#define LGW_SPI_MASTER_CHIP_SELECT_POLARITY 303
+#define LGW_SPI_MASTER_CPOL 304
+#define LGW_SPI_MASTER_CPHA 305
+#define LGW_SIG_GEN_ANALYSER_MUX_SEL 306
+#define LGW_SIG_GEN_EN 307
+#define LGW_SIG_ANALYSER_EN 308
+#define LGW_SIG_ANALYSER_AVG_LEN 309
+#define LGW_SIG_ANALYSER_PRECISION 310
+#define LGW_SIG_ANALYSER_VALID_OUT 311
+#define LGW_SIG_GEN_FREQ 312
+#define LGW_SIG_ANALYSER_FREQ 313
+#define LGW_SIG_ANALYSER_I_OUT 314
+#define LGW_SIG_ANALYSER_Q_OUT 315
+#define LGW_GPS_EN 316
+#define LGW_GPS_POL 317
+#define LGW_SW_TEST_REG1 318
+#define LGW_SW_TEST_REG2 319
+#define LGW_SW_TEST_REG3 320
+#define LGW_DATA_MNGT_STATUS 321
+#define LGW_DATA_MNGT_CPT_FRAME_ALLOCATED 322
+#define LGW_DATA_MNGT_CPT_FRAME_FINISHED 323
+#define LGW_DATA_MNGT_CPT_FRAME_READEN 324
+#define LGW_TX_TRIG_ALL 325
+
+#define LGW_TOTALREGS 326
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC FUNCTIONS PROTOTYPES ------------------------------------------ */
+
+/**
+@brief Connect LoRa concentrator by opening SPI link
+@return status of register operation (LGW_REG_SUCCESS/LGW_REG_ERROR)
+*/
+int lgw_connect(void);
+
+/**
+@brief Disconnect LoRa concentrator by closing SPI link
+@return status of register operation (LGW_REG_SUCCESS/LGW_REG_ERROR)
+*/
+int lgw_disconnect(void);
+
+/**
+@brief Use the soft-reset register to put the concentrator in initial state
+@return status of register operation (LGW_REG_SUCCESS/LGW_REG_ERROR)
+*/
+int lgw_soft_reset(void);
+
+/**
+@brief Check if the registers are ok, send diagnostics to stdio/stderr/file
+@param f file descriptor to to which the check result will be written
+@return status of register operation (LGW_REG_SUCCESS/LGW_REG_ERROR)
+*/
+int lgw_reg_check(FILE *f);
+
+/**
+@brief LoRa concentrator register write
+@param register_id register number in the data structure describing registers
+@param reg_value signed value to write to the register (for u32, use cast)
+@return status of register operation (LGW_REG_SUCCESS/LGW_REG_ERROR)
+*/
+int lgw_reg_w(uint16_t register_id, int32_t reg_value);
+
+/**
+@brief LoRa concentrator register read
+@param register_id register number in the data structure describing registers
+@param reg_value pointer to a variable where to write register read value
+@return status of register operation (LGW_REG_SUCCESS/LGW_REG_ERROR)
+*/
+int lgw_reg_r(uint16_t register_id, int32_t *reg_value);
+
+/**
+@brief LoRa concentrator register burst write
+@param register_id register number in the data structure describing registers
+@param data pointer to byte array that will be sent to the LoRa concentrator
+@param size size of the transfer, in byte(s)
+@return status of register operation (LGW_REG_SUCCESS/LGW_REG_ERROR)
+*/
+int lgw_reg_wb(uint16_t register_id, uint8_t *data, uint16_t size);
+
+/**
+@brief LoRa concentrator register burst read
+@param register_id register number in the data structure describing registers
+@param data pointer to byte array that will be written from the LoRa concentrator
+@param size size of the transfer, in byte(s)
+@return status of register operation (LGW_REG_SUCCESS/LGW_REG_ERROR)
+*/
+int lgw_reg_rb(uint16_t register_id, uint8_t *data, uint16_t size);
+
+
+#endif
+
+/* --- EOF ------------------------------------------------------------------ */
diff -r 000000000000 -r c76361bd82e8 src/SX1308HAL/inc/sx1308.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/SX1308HAL/inc/sx1308.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,47 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech
+*/
+
+#ifndef SX1308_H
+#define SX1308_H
+
+#include "mbed.h"
+
+class SX1308 {
+
+public:
+ SX1308(PinName slaveSelectPin, PinName mosi, PinName miso, PinName sclk, PinName interrupt, PinName Reset);
+ virtual bool init();
+ void dig_reset();
+ void spiWrite(uint8_t reg, uint8_t val);
+ void spiWriteBurstF(uint8_t reg, uint8_t * val, int size);
+ void spiWriteBurst(uint8_t reg, uint8_t * val, int size);
+ void spiWriteBurstM(uint8_t reg, uint8_t * val, int size);
+ void spiWriteBurstE(uint8_t reg, uint8_t * val, int size);
+ uint8_t spiRead(uint8_t reg);
+ uint8_t spiReadBurstF(uint8_t reg, uint8_t *data, int size);
+ uint8_t spiReadBurstM(uint8_t reg, uint8_t *data, int size);
+ uint8_t spiReadBurstE(uint8_t reg, uint8_t *data, int size);
+ uint8_t spiReadBurst(uint8_t reg, uint8_t *data, int size);
+ volatile uint8_t waittxend;
+ uint8_t txongoing;
+ Timer timerstm32ref;
+ uint32_t offtmstpstm32;
+ uint32_t offtmstpstm32ref;
+ bool firsttx;
+
+private:
+ void isr0();
+ uint8_t _interruptPin;
+ DigitalOut _slaveSelectPin;
+ DigitalOut _reset;
+ SPI _spi;
+ InterruptIn _interrupt;
+};
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/SX1308HAL/src/loragw_hal.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/SX1308HAL/src/loragw_hal.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1582 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+(C)2017 Semtech-Cycleo
+
+Description:
+LoRa concentrator Hardware Abstraction Layer
+
+License: Revised BSD License, see LICENSE.TXT file include in the project
+*/
+
+
+/* -------------------------------------------------------------------------- */
+/* --- DEPENDANCIES --------------------------------------------------------- */
+
+#include <stdint.h> /* C99 types */
+#include <stdbool.h> /* bool type */
+#include <stdio.h> /* printf fprintf */
+#include <string.h> /* memcpy */
+#include <math.h> /* pow, cell */
+#include "loragw_reg.h"
+#include "loragw_hal.h"
+#include "loragw_radio.h"
+#include "board.h"
+
+/* -------------------------------------------------------------------------- */
+/* --- PRIVATE MACROS ------------------------------------------------------- */
+
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
+#if DEBUG_HAL == 1
+#define DEBUG_MSG(str) pc.printf(str)
+#define DEBUG_PRINTF(fmt, args...) pc.printf("%s:%d: "fmt, __FUNCTION__, __LINE__, args)
+#define DEBUG_ARRAY(a,b,c) for(a=0;a!=0;){}
+#define CHECK_NULL(a) if(a==NULL){return LGW_HAL_ERROR;}
+#else
+#define DEBUG_MSG(str)
+#define DEBUG_PRINTF(fmt, args...)
+#define DEBUG_ARRAY(a,b,c) for(a=0;a!=0;){}
+#define CHECK_NULL(a) if(a==NULL){return LGW_HAL_ERROR;}
+#endif
+#define IF_HZ_TO_REG(f) (f << 5)/15625
+#define SET_PPM_ON(bw,dr) (((bw == BW_125KHZ) && ((dr == DR_LORA_SF11) || (dr == DR_LORA_SF12))) || ((bw == BW_250KHZ) && (dr == DR_LORA_SF12)))
+#define TRACE()
+
+/* -------------------------------------------------------------------------- */
+/* --- PRIVATE CONSTANTS & TYPES -------------------------------------------- */
+
+#define MCU_ARB 0
+#define MCU_AGC 1
+#define MCU_ARB_FW_BYTE 8192 /* size of the firmware IN BYTES (= twice the number of 14b words) */
+#define MCU_AGC_FW_BYTE 8192 /* size of the firmware IN BYTES (= twice the number of 14b words) */
+#define FW_VERSION_ADDR 0x20 /* Address of firmware version in data memory */
+#define FW_VERSION_CAL 2 /* Expected version of calibration firmware */
+#define FW_VERSION_AGC 4 /* Expected version of AGC firmware */
+#define FW_VERSION_ARB 1 /* Expected version of arbiter firmware */
+#define TX_METADATA_NB 16
+#define RX_METADATA_NB 16
+#define AGC_CMD_WAIT 16
+#define AGC_CMD_ABORT 17
+#define MIN_LORA_PREAMBLE 4
+#define STD_LORA_PREAMBLE 6
+#define MIN_FSK_PREAMBLE 3
+#define STD_FSK_PREAMBLE 5
+#define TX_START_DELAY 1500
+#define RSSI_MULTI_BIAS -35 /* difference between "multi" modem RSSI offset and "stand-alone" modem RSSI offset */
+#define RSSI_FSK_POLY_0 60 /* polynomiam coefficients to linearize FSK RSSI */
+#define RSSI_FSK_POLY_1 1.5351
+#define RSSI_FSK_POLY_2 0.003
+#define LGW_RF_RX_BANDWIDTH_125KHZ 925000 /* for 125KHz channels */
+#define LGW_RF_RX_BANDWIDTH_250KHZ 1000000 /* for 250KHz channels */
+#define LGW_RF_RX_BANDWIDTH_500KHZ 1100000 /* for 500KHz channels */
+/* constant arrays defining hardware capability */
+const uint8_t ifmod_config[LGW_IF_CHAIN_NB] = LGW_IFMODEM_CONFIG;
+
+
+/* Version string, used to identify the library version/options once compiled */
+const char lgw_version_string[] = "Version: 0.1";// LIBLORAGW_VERSION ";";
+
+/* -------------------------------------------------------------------------- */
+/* --- PRIVATE VARIABLES ---------------------------------------------------- */
+
+static int32_t iqrxtab[4];
+
+/*
+The following static variables are the configuration set that the user can
+modify using rxrf_setconf, rxif_setconf and txgain_setconf functions.
+The functions _start and _send then use that set to configure the hardware.
+
+Parameters validity and coherency is verified by the _setconf functions and
+the _start and _send functions assume they are valid.
+*/
+
+static bool rf_enable[LGW_RF_CHAIN_NB];
+static uint32_t rf_rx_freq[LGW_RF_CHAIN_NB]; /* absolute, in Hz */
+static float rf_rssi_offset[LGW_RF_CHAIN_NB];
+static bool rf_tx_enable[LGW_RF_CHAIN_NB];
+static enum lgw_radio_type_e rf_radio_type[LGW_RF_CHAIN_NB];
+static bool if_enable[LGW_IF_CHAIN_NB];
+static bool if_rf_chain[LGW_IF_CHAIN_NB]; /* for each IF, 0 -> radio A, 1 -> radio B */
+static int32_t if_freq[LGW_IF_CHAIN_NB]; /* relative to radio frequency, +/- in Hz */
+static uint8_t lora_multi_sfmask[LGW_MULTI_NB]; /* enables SF for LoRa 'multi' modems */
+static uint8_t lora_rx_bw; /* bandwidth setting for LoRa standalone modem */
+static uint8_t lora_rx_sf; /* spreading factor setting for LoRa standalone modem */
+static bool lora_rx_ppm_offset;
+static uint8_t fsk_rx_bw; /* bandwidth setting of FSK modem */
+static uint32_t fsk_rx_dr; /* FSK modem datarate in bauds */
+static uint8_t fsk_sync_word_size = 3; /* default number of bytes for FSK sync word */
+static uint64_t fsk_sync_word = 0xC194C1; /* default FSK sync word (ALIGNED RIGHT, MSbit first) */
+static bool lorawan_public = true;
+
+static struct lgw_tx_gain_lut_s txgain_lut = {
+ .size = 2,
+ .lut[0] = {
+ .dig_gain = 0,
+ .pa_gain = 2,
+ .dac_gain = 3,
+ .mix_gain = 10,
+ .rf_power = 14
+ },
+ .lut[1] = {
+ .dig_gain = 0,
+ .pa_gain = 3,
+ .dac_gain = 3,
+ .mix_gain = 14,
+ .rf_power = 27
+ }
+};
+
+/* TX I/Q imbalance coefficients for mixer gain = 8 to 15 */
+static int8_t cal_offset_a_i[16]; /* TX I offset for radio A */
+static int8_t cal_offset_a_q[16]; /* TX Q offset for radio A */
+static int8_t cal_offset_b_i[16]; /* TX I offset for radio B */
+static int8_t cal_offset_b_q[16]; /* TX Q offset for radio B */
+
+/* -------------------------------------------------------------------------- */
+/* --- PRIVATE FUNCTIONS DECLARATION ---------------------------------------- */
+
+void lgw_constant_adjust(void);
+int32_t lgw_sf_getval(int x);
+int32_t lgw_bw_getval(int x);
+int reset_firmware(uint8_t target);
+void calibration_save(void);
+void calibration_reload(void);
+
+/* -------------------------------------------------------------------------- */
+/* --- PRIVATE FUNCTIONS DEFINITION ----------------------------------------- */
+
+int reset_firmware(uint8_t target) {
+ int reg_rst;
+ int reg_sel;
+
+ /* check parameters */
+ if (target == MCU_ARB) {
+ reg_rst = LGW_MCU_RST_0;
+ reg_sel = LGW_MCU_SELECT_MUX_0;
+ } else if (target == MCU_AGC) {
+ reg_rst = LGW_MCU_RST_1;
+ reg_sel = LGW_MCU_SELECT_MUX_1;
+ } else {
+ DEBUG_MSG("ERROR: NOT A VALID TARGET FOR RESETTING FIRMWARE\n");
+ return -1;
+ }
+
+ /* reset the targeted MCU */
+ lgw_reg_w(reg_rst, 1);
+
+ /* set mux to access MCU program RAM and set address to 0 */
+ lgw_reg_w(reg_sel, 0);
+ lgw_reg_w(LGW_MCU_PROM_ADDR, 0);
+
+ /* give back control of the MCU program ram to the MCU */
+ lgw_reg_w(reg_sel, 1);
+
+ return 0;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+void lgw_constant_adjust(void) {
+
+ /* I/Q path setup */
+ // lgw_reg_w(LGW_RX_INVERT_IQ,0); /* default 0 */
+ // lgw_reg_w(LGW_MODEM_INVERT_IQ,1); /* default 1 */
+ // lgw_reg_w(LGW_CHIRP_INVERT_RX,1); /* default 1 */
+ // lgw_reg_w(LGW_RX_EDGE_SELECT,0); /* default 0 */
+ // lgw_reg_w(LGW_MBWSSF_MODEM_INVERT_IQ,0); /* default 0 */
+ // lgw_reg_w(LGW_DC_NOTCH_EN,1); /* default 1 */
+ lgw_reg_w(LGW_RSSI_BB_FILTER_ALPHA, 6); /* default 7 */
+ lgw_reg_w(LGW_RSSI_DEC_FILTER_ALPHA, 7); /* default 5 */
+ lgw_reg_w(LGW_RSSI_CHANN_FILTER_ALPHA, 7); /* default 8 */
+ lgw_reg_w(LGW_RSSI_BB_DEFAULT_VALUE, 23); /* default 32 */
+ lgw_reg_w(LGW_RSSI_CHANN_DEFAULT_VALUE, 85); /* default 100 */
+ lgw_reg_w(LGW_RSSI_DEC_DEFAULT_VALUE, 66); /* default 100 */
+ lgw_reg_w(LGW_DEC_GAIN_OFFSET, 7); /* default 8 */
+ lgw_reg_w(LGW_CHAN_GAIN_OFFSET, 6); /* default 7 */
+
+ /* Correlator setup */
+ // lgw_reg_w(LGW_CORR_DETECT_EN,126); /* default 126 */
+ // lgw_reg_w(LGW_CORR_NUM_SAME_PEAK,4); /* default 4 */
+ // lgw_reg_w(LGW_CORR_MAC_GAIN,5); /* default 5 */
+ // lgw_reg_w(LGW_CORR_SAME_PEAKS_OPTION_SF6,0); /* default 0 */
+ // lgw_reg_w(LGW_CORR_SAME_PEAKS_OPTION_SF7,1); /* default 1 */
+ // lgw_reg_w(LGW_CORR_SAME_PEAKS_OPTION_SF8,1); /* default 1 */
+ // lgw_reg_w(LGW_CORR_SAME_PEAKS_OPTION_SF9,1); /* default 1 */
+ // lgw_reg_w(LGW_CORR_SAME_PEAKS_OPTION_SF10,1); /* default 1 */
+ // lgw_reg_w(LGW_CORR_SAME_PEAKS_OPTION_SF11,1); /* default 1 */
+ // lgw_reg_w(LGW_CORR_SAME_PEAKS_OPTION_SF12,1); /* default 1 */
+ // lgw_reg_w(LGW_CORR_SIG_NOISE_RATIO_SF6,4); /* default 4 */
+ // lgw_reg_w(LGW_CORR_SIG_NOISE_RATIO_SF7,4); /* default 4 */
+ // lgw_reg_w(LGW_CORR_SIG_NOISE_RATIO_SF8,4); /* default 4 */
+ // lgw_reg_w(LGW_CORR_SIG_NOISE_RATIO_SF9,4); /* default 4 */
+ // lgw_reg_w(LGW_CORR_SIG_NOISE_RATIO_SF10,4); /* default 4 */
+ // lgw_reg_w(LGW_CORR_SIG_NOISE_RATIO_SF11,4); /* default 4 */
+ // lgw_reg_w(LGW_CORR_SIG_NOISE_RATIO_SF12,4); /* default 4 */
+
+ /* LoRa 'multi' demodulators setup */
+ // lgw_reg_w(LGW_PREAMBLE_SYMB1_NB,10); /* default 10 */
+ // lgw_reg_w(LGW_FREQ_TO_TIME_INVERT,29); /* default 29 */
+ // lgw_reg_w(LGW_FRAME_SYNCH_GAIN,1); /* default 1 */
+ // lgw_reg_w(LGW_SYNCH_DETECT_TH,1); /* default 1 */
+ // lgw_reg_w(LGW_ZERO_PAD,0); /* default 0 */
+ lgw_reg_w(LGW_SNR_AVG_CST, 3); /* default 2 */
+ if (lorawan_public) { /* LoRa network */
+ lgw_reg_w(LGW_FRAME_SYNCH_PEAK1_POS, 3); /* default 1 */
+ lgw_reg_w(LGW_FRAME_SYNCH_PEAK2_POS, 4); /* default 2 */
+ } else { /* private network */
+ lgw_reg_w(LGW_FRAME_SYNCH_PEAK1_POS, 1); /* default 1 */
+ lgw_reg_w(LGW_FRAME_SYNCH_PEAK2_POS, 2); /* default 2 */
+ }
+
+ // lgw_reg_w(LGW_PREAMBLE_FINE_TIMING_GAIN,1); /* default 1 */
+ // lgw_reg_w(LGW_ONLY_CRC_EN,1); /* default 1 */
+ // lgw_reg_w(LGW_PAYLOAD_FINE_TIMING_GAIN,2); /* default 2 */
+ // lgw_reg_w(LGW_TRACKING_INTEGRAL,0); /* default 0 */
+ // lgw_reg_w(LGW_ADJUST_MODEM_START_OFFSET_RDX8,0); /* default 0 */
+ // lgw_reg_w(LGW_ADJUST_MODEM_START_OFFSET_SF12_RDX4,4092); /* default 4092 */
+ // lgw_reg_w(LGW_MAX_PAYLOAD_LEN,255); /* default 255 */
+
+ /* LoRa standalone 'MBWSSF' demodulator setup */
+ // lgw_reg_w(LGW_MBWSSF_PREAMBLE_SYMB1_NB,10); /* default 10 */
+ // lgw_reg_w(LGW_MBWSSF_FREQ_TO_TIME_INVERT,29); /* default 29 */
+ // lgw_reg_w(LGW_MBWSSF_FRAME_SYNCH_GAIN,1); /* default 1 */
+ // lgw_reg_w(LGW_MBWSSF_SYNCH_DETECT_TH,1); /* default 1 */
+ // lgw_reg_w(LGW_MBWSSF_ZERO_PAD,0); /* default 0 */
+ if (lorawan_public) { /* LoRa network */
+ lgw_reg_w(LGW_MBWSSF_FRAME_SYNCH_PEAK1_POS, 3); /* default 1 */
+ lgw_reg_w(LGW_MBWSSF_FRAME_SYNCH_PEAK2_POS, 4); /* default 2 */
+ } else {
+ lgw_reg_w(LGW_MBWSSF_FRAME_SYNCH_PEAK1_POS, 1); /* default 1 */
+ lgw_reg_w(LGW_MBWSSF_FRAME_SYNCH_PEAK2_POS, 2); /* default 2 */
+ }
+ // lgw_reg_w(LGW_MBWSSF_ONLY_CRC_EN,1); /* default 1 */
+ // lgw_reg_w(LGW_MBWSSF_PAYLOAD_FINE_TIMING_GAIN,2); /* default 2 */
+ // lgw_reg_w(LGW_MBWSSF_PREAMBLE_FINE_TIMING_GAIN,1); /* default 1 */
+ // lgw_reg_w(LGW_MBWSSF_TRACKING_INTEGRAL,0); /* default 0 */
+ // lgw_reg_w(LGW_MBWSSF_AGC_FREEZE_ON_DETECT,1); /* default 1 */
+ lgw_reg_w(LGW_ADJUST_MODEM_START_OFFSET_RDX4, 1); /* default 0 */
+ lgw_reg_w(LGW_ADJUST_MODEM_START_OFFSET_SF12_RDX4, 4094); /* default 4092 */
+ lgw_reg_w(LGW_CORR_MAC_GAIN, 7); /* default 5 */
+
+
+
+ /* FSK datapath setup */
+ lgw_reg_w(LGW_FSK_RX_INVERT, 1); /* default 0 */
+ lgw_reg_w(LGW_FSK_MODEM_INVERT_IQ, 1); /* default 0 */
+
+ /* FSK demodulator setup */
+ lgw_reg_w(LGW_FSK_RSSI_LENGTH, 4); /* default 0 */
+ lgw_reg_w(LGW_FSK_PKT_MODE, 1); /* variable length, default 0 */
+ lgw_reg_w(LGW_FSK_CRC_EN, 1); /* default 0 */
+ lgw_reg_w(LGW_FSK_DCFREE_ENC, 2); /* default 0 */
+ // lgw_reg_w(LGW_FSK_CRC_IBM,0); /* default 0 */
+ lgw_reg_w(LGW_FSK_ERROR_OSR_TOL, 10); /* default 0 */
+ lgw_reg_w(LGW_FSK_PKT_LENGTH, 255); /* max packet length in variable length mode */
+ // lgw_reg_w(LGW_FSK_NODE_ADRS,0); /* default 0 */
+ // lgw_reg_w(LGW_FSK_BROADCAST,0); /* default 0 */
+ // lgw_reg_w(LGW_FSK_AUTO_AFC_ON,0); /* default 0 */
+ lgw_reg_w(LGW_FSK_PATTERN_TIMEOUT_CFG, 128); /* sync timeout (allow 8 bytes preamble + 8 bytes sync word, default 0 */
+
+ /* TX general parameters */
+ lgw_reg_w(LGW_TX_START_DELAY, TX_START_DELAY); /* default 0 */
+
+ /* TX LoRa */
+ // lgw_reg_w(LGW_TX_MODE,0); /* default 0 */
+ lgw_reg_w(LGW_TX_SWAP_IQ, 1); /* "normal" polarity; default 0 */
+ if (lorawan_public) { /* LoRa network */
+ lgw_reg_w(LGW_TX_FRAME_SYNCH_PEAK1_POS, 3); /* default 1 */
+ lgw_reg_w(LGW_TX_FRAME_SYNCH_PEAK2_POS, 4); /* default 2 */
+ } else { /* Private network */
+ lgw_reg_w(LGW_TX_FRAME_SYNCH_PEAK1_POS, 1); /* default 1 */
+ lgw_reg_w(LGW_TX_FRAME_SYNCH_PEAK2_POS, 2); /* default 2 */
+ }
+
+ /* TX FSK */
+ // lgw_reg_w(LGW_FSK_TX_GAUSSIAN_EN,1); /* default 1 */
+ lgw_reg_w(LGW_FSK_TX_GAUSSIAN_SELECT_BT, 2); /* Gaussian filter always on TX, default 0 */
+ // lgw_reg_w(LGW_FSK_TX_PATTERN_EN,1); /* default 1 */
+ // lgw_reg_w(LGW_FSK_TX_PREAMBLE_SEQ,0); /* default 0 */
+
+ return;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int32_t lgw_bw_getval(int x) {
+ switch (x) {
+ case BW_500KHZ:
+ return 500000;
+ case BW_250KHZ:
+ return 250000;
+ case BW_125KHZ:
+ return 125000;
+ case BW_62K5HZ:
+ return 62500;
+ case BW_31K2HZ:
+ return 31200;
+ case BW_15K6HZ:
+ return 15600;
+ case BW_7K8HZ:
+ return 7800;
+ default:
+ return -1;
+ }
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int32_t lgw_sf_getval(int x) {
+ switch (x) {
+ case DR_LORA_SF7:
+ return 7;
+ case DR_LORA_SF8:
+ return 8;
+ case DR_LORA_SF9:
+ return 9;
+ case DR_LORA_SF10:
+ return 10;
+ case DR_LORA_SF11:
+ return 11;
+ case DR_LORA_SF12:
+ return 12;
+ default:
+ return -1;
+ }
+}
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC FUNCTIONS DEFINITION ------------------------------------------ */
+
+int lgw_board_setconf(struct lgw_conf_board_s conf) {
+
+ /* set internal config according to parameters */
+ lorawan_public = conf.lorawan_public;
+
+ DEBUG_PRINTF("Note: board configuration; lorawan_public:%d\n", lorawan_public);
+
+ return LGW_HAL_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_rxrf_setconf(uint8_t rf_chain, struct lgw_conf_rxrf_s conf) {
+
+ /* check input range (segfault prevention) */
+ if (rf_chain >= LGW_RF_CHAIN_NB) {
+ DEBUG_MSG("ERROR: NOT A VALID RF_CHAIN NUMBER\n");
+ return LGW_HAL_ERROR;
+ }
+
+ /* check if radio type is supported */
+ if ((conf.type != LGW_RADIO_TYPE_SX1255) && (conf.type != LGW_RADIO_TYPE_SX1257)) {
+ DEBUG_MSG("ERROR: NOT A VALID RADIO TYPE\n");
+ return LGW_HAL_ERROR;
+ }
+
+ /* set internal config according to parameters */
+ rf_enable[rf_chain] = conf.enable;
+ rf_rx_freq[rf_chain] = conf.freq_hz;
+ rf_rssi_offset[rf_chain] = conf.rssi_offset;
+ rf_radio_type[rf_chain] = conf.type;
+ rf_tx_enable[rf_chain] = conf.tx_enable;
+
+ DEBUG_PRINTF("Note: rf_chain %d configuration; en:%d freq:%d rssi_offset:%f radio_type:%d tx_enable:%d tx_notch_freq:%u\n", rf_chain, rf_enable[rf_chain], rf_rx_freq[rf_chain], rf_rssi_offset[rf_chain], rf_radio_type[rf_chain], rf_tx_enable[rf_chain]);
+
+ return LGW_HAL_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_rxif_setconf(uint8_t if_chain, struct lgw_conf_rxif_s conf) {
+ int32_t bw_hz;
+ uint32_t rf_rx_bandwidth;
+
+ /* check input range (segfault prevention) */
+ if (if_chain >= LGW_IF_CHAIN_NB) {
+ DEBUG_PRINTF("ERROR: %d NOT A VALID IF_CHAIN NUMBER\n", if_chain);
+ return LGW_HAL_ERROR;
+ }
+
+ /* if chain is disabled, don't care about most parameters */
+ if (conf.enable == false) {
+ if_enable[if_chain] = false;
+ if_freq[if_chain] = 0;
+ DEBUG_PRINTF("Note: if_chain %d disabled\n", if_chain);
+ return LGW_HAL_SUCCESS;
+ }
+
+ /* check 'general' parameters */
+ if (ifmod_config[if_chain] == IF_UNDEFINED) {
+ DEBUG_PRINTF("ERROR: IF CHAIN %d NOT CONFIGURABLE\n", if_chain);
+ }
+ if (conf.rf_chain >= LGW_RF_CHAIN_NB) {
+ DEBUG_MSG("ERROR: INVALID RF_CHAIN TO ASSOCIATE WITH A LORA_STD IF CHAIN\n");
+ return LGW_HAL_ERROR;
+ }
+
+ switch (conf.bandwidth) {
+ case BW_250KHZ:
+ rf_rx_bandwidth = LGW_RF_RX_BANDWIDTH_250KHZ;
+ break;
+ case BW_500KHZ:
+ rf_rx_bandwidth = LGW_RF_RX_BANDWIDTH_500KHZ;
+ break;
+ default:
+ rf_rx_bandwidth = LGW_RF_RX_BANDWIDTH_125KHZ;
+ break;
+ }
+
+ bw_hz = lgw_bw_getval(conf.bandwidth);
+ if ((conf.freq_hz + ((bw_hz == -1) ? LGW_REF_BW : bw_hz) / 2) > ((int32_t)rf_rx_bandwidth / 2)) {
+ DEBUG_PRINTF("ERROR: IF FREQUENCY %d TOO HIGH\n", conf.freq_hz);
+ return LGW_HAL_ERROR;
+ } else if ((conf.freq_hz - ((bw_hz == -1) ? LGW_REF_BW : bw_hz) / 2) < -((int32_t)rf_rx_bandwidth / 2)) {
+ DEBUG_PRINTF("ERROR: IF FREQUENCY %d TOO LOW\n", conf.freq_hz);
+ return LGW_HAL_ERROR;
+ }
+
+ /* check parameters according to the type of IF chain + modem,
+ fill default if necessary, and commit configuration if everything is OK */
+ switch (ifmod_config[if_chain]) {
+ case IF_LORA_STD:
+ /* fill default parameters if needed */
+ if (conf.bandwidth == BW_UNDEFINED) {
+ conf.bandwidth = BW_250KHZ;
+ }
+ if (conf.datarate == DR_UNDEFINED) {
+ conf.datarate = DR_LORA_SF9;
+ }
+ /* check BW & DR */
+ if (!IS_LORA_BW(conf.bandwidth)) {
+ DEBUG_MSG("ERROR: BANDWIDTH NOT SUPPORTED BY LORA_STD IF CHAIN\n");
+ return LGW_HAL_ERROR;
+ }
+ if (!IS_LORA_STD_DR(conf.datarate)) {
+ DEBUG_MSG("ERROR: DATARATE NOT SUPPORTED BY LORA_STD IF CHAIN\n");
+ return LGW_HAL_ERROR;
+ }
+ /* set internal configuration */
+ if_enable[if_chain] = conf.enable;
+ if_rf_chain[if_chain] = conf.rf_chain;
+ if_freq[if_chain] = conf.freq_hz;
+ lora_rx_bw = conf.bandwidth;
+ lora_rx_sf = (uint8_t)(DR_LORA_MULTI & conf.datarate); /* filter SF out of the 7-12 range */
+ if (SET_PPM_ON(conf.bandwidth, conf.datarate)) {
+ lora_rx_ppm_offset = true;
+ } else {
+ lora_rx_ppm_offset = false;
+ }
+
+ DEBUG_PRINTF("Note: LoRa 'std' if_chain %d configuration; en:%d freq:%d bw:%d dr:%d\n", if_chain, if_enable[if_chain], if_freq[if_chain], lora_rx_bw, lora_rx_sf);
+ break;
+
+ case IF_LORA_MULTI:
+ /* fill default parameters if needed */
+ if (conf.bandwidth == BW_UNDEFINED) {
+ conf.bandwidth = BW_125KHZ;
+ }
+ if (conf.datarate == DR_UNDEFINED) {
+ conf.datarate = DR_LORA_MULTI;
+ }
+ /* check BW & DR */
+ if (conf.bandwidth != BW_125KHZ) {
+ DEBUG_MSG("ERROR: BANDWIDTH NOT SUPPORTED BY LORA_MULTI IF CHAIN\n");
+ return LGW_HAL_ERROR;
+ }
+ if (!IS_LORA_MULTI_DR(conf.datarate)) {
+ DEBUG_MSG("ERROR: DATARATE(S) NOT SUPPORTED BY LORA_MULTI IF CHAIN\n");
+ return LGW_HAL_ERROR;
+ }
+ /* set internal configuration */
+ if_enable[if_chain] = conf.enable;
+ if_rf_chain[if_chain] = conf.rf_chain;
+ if_freq[if_chain] = conf.freq_hz;
+ lora_multi_sfmask[if_chain] = (uint8_t)(DR_LORA_MULTI & conf.datarate); /* filter SF out of the 7-12 range */
+
+ DEBUG_PRINTF("Note: LoRa 'multi' if_chain %d configuration; en:%d freq:%d SF_mask:0x%02x\n", if_chain, if_enable[if_chain], if_freq[if_chain], lora_multi_sfmask[if_chain]);
+ break;
+
+ case IF_FSK_STD:
+ /* fill default parameters if needed */
+ if (conf.bandwidth == BW_UNDEFINED) {
+ conf.bandwidth = BW_250KHZ;
+ }
+ if (conf.datarate == DR_UNDEFINED) {
+ conf.datarate = 64000; /* default datarate */
+ }
+ /* check BW & DR */
+ if (!IS_FSK_BW(conf.bandwidth)) {
+ DEBUG_MSG("ERROR: BANDWIDTH NOT SUPPORTED BY FSK IF CHAIN\n");
+ return LGW_HAL_ERROR;
+ }
+ if (!IS_FSK_DR(conf.datarate)) {
+ DEBUG_MSG("ERROR: DATARATE NOT SUPPORTED BY FSK IF CHAIN\n");
+ return LGW_HAL_ERROR;
+ }
+ /* set internal configuration */
+ if_enable[if_chain] = conf.enable;
+ if_rf_chain[if_chain] = conf.rf_chain;
+ if_freq[if_chain] = conf.freq_hz;
+ fsk_rx_bw = conf.bandwidth;
+ fsk_rx_dr = conf.datarate;
+ if (conf.sync_word > 0) {
+ fsk_sync_word_size = conf.sync_word_size;
+ fsk_sync_word = conf.sync_word;
+ }
+ DEBUG_PRINTF("Note: FSK if_chain %d configuration; en:%d freq:%d bw:%d dr:%d (%d real dr) sync:0x%0*llX\n", if_chain, if_enable[if_chain], if_freq[if_chain], fsk_rx_bw, fsk_rx_dr, LGW_XTAL_FREQU / (LGW_XTAL_FREQU / fsk_rx_dr), 2 * fsk_sync_word_size, fsk_sync_word);
+ break;
+
+ default:
+ DEBUG_PRINTF("ERROR: IF CHAIN %d TYPE NOT SUPPORTED\n", if_chain);
+ return LGW_HAL_ERROR;
+ }
+
+ return LGW_HAL_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_txgain_setconf(struct lgw_tx_gain_lut_s *conf) {
+ int i;
+
+ /* Check LUT size */
+ if ((conf->size < 1) || (conf->size > TX_GAIN_LUT_SIZE_MAX)) {
+ DEBUG_PRINTF("ERROR: TX gain LUT must have at least one entry and maximum %d entries\n", TX_GAIN_LUT_SIZE_MAX);
+ return LGW_HAL_ERROR;
+ }
+
+ txgain_lut.size = conf->size;
+
+ for (i = 0; i < txgain_lut.size; i++) {
+ /* Check gain range */
+ if (conf->lut[i].dig_gain > 3) {
+ DEBUG_MSG("ERROR: TX gain LUT: SX1308 digital gain must be between 0 and 3\n");
+ return LGW_HAL_ERROR;
+ }
+ if (conf->lut[i].dac_gain != 3) {
+ DEBUG_MSG("ERROR: TX gain LUT: SX1257 DAC gains != 3 are not supported\n");
+ return LGW_HAL_ERROR;
+ }
+ if (conf->lut[i].mix_gain > 15) {
+ DEBUG_MSG("WARNING: TX gain LUT: SX1257 mixer gain must not exceed 15\n");
+ return LGW_HAL_ERROR;
+ }
+ if (conf->lut[i].pa_gain > 3) {
+ DEBUG_MSG("ERROR: TX gain LUT: External PA gain must not exceed 3\n");
+ return LGW_HAL_ERROR;
+ }
+
+ /* Set internal LUT */
+ txgain_lut.lut[i].dig_gain = conf->lut[i].dig_gain;
+ txgain_lut.lut[i].dac_gain = conf->lut[i].dac_gain;
+ txgain_lut.lut[i].mix_gain = conf->lut[i].mix_gain;
+ txgain_lut.lut[i].pa_gain = conf->lut[i].pa_gain;
+ txgain_lut.lut[i].rf_power = conf->lut[i].rf_power;
+ }
+
+ return LGW_HAL_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_start(void) {
+ int i;
+ uint32_t x;
+ uint8_t radio_select;
+ int32_t read_val;
+ uint8_t load_val;
+ uint8_t fw_version;
+ uint64_t fsk_sync_word_reg;
+ int DELAYSTART = 1;
+
+ /* Enable clocks */
+ lgw_reg_w(LGW_GLOBAL_EN, 1);
+ lgw_reg_w(LGW_CLK32M_EN, 1);
+
+ /* Compute counter offset to be applied to SX1308 internal counter on receive and send */
+ Sx1308.offtmstpstm32 = Sx1308.timerstm32ref.read_us() - Sx1308.offtmstpstm32ref;
+
+ /* Set all GPIOs as output RXON/TXON*/
+ lgw_reg_w(LGW_GPIO_MODE, 31);
+ lgw_reg_w(LGW_GPIO_SELECT_OUTPUT, 0);
+
+ /* select calibration command */
+ calibration_reload();
+
+ /* load adjusted parameters */
+ lgw_constant_adjust();
+
+ /* Sanity check for RX frequency */
+ if (rf_rx_freq[0] == 0) {
+ DEBUG_MSG("ERROR: wrong configuration, rf_rx_freq[0] is not set\n");
+ return LGW_HAL_ERROR;
+ }
+
+ /* Freq-to-time-drift calculation */
+ //float ftemp=(409600 / (rf_rx_freq[0] >> 1))*10000;
+ float ftemp = (4096 * 2) / (rf_rx_freq[0] / 1000000);
+ x = (uint32_t)ftemp; /* dividend: (4*2048*1000000) >> 1, rescaled to avoid 32b overflow */
+ x = (x > 63) ? 63 : x; /* saturation */
+ lgw_reg_w(LGW_FREQ_TO_TIME_DRIFT, x); /* default 9 */
+
+ //ftemp=(409600 / (rf_rx_freq[0] >> 3))*10000; /* dividend: (16*2048*1000000) >> 3, rescaled to avoid 32b overflow */
+ ftemp = (4096 * 8) / (rf_rx_freq[0] / 1000000);
+ x = (uint32_t)ftemp;
+ x = (x > 63) ? 63 : x; /* saturation */
+ lgw_reg_w(LGW_MBWSSF_FREQ_TO_TIME_DRIFT, x); /* default 36 */
+
+ /* configure LoRa 'multi' demodulators aka. LoRa 'sensor' channels (IF0-3) */
+ radio_select = 0; /* IF mapping to radio A/B (per bit, 0=A, 1=B) */
+ for (i = 0; i < LGW_MULTI_NB; ++i) {
+ radio_select += (if_rf_chain[i] == 1 ? 1 << i : 0); /* transform bool array into binary word */
+ }
+ /*
+ lgw_reg_w(LGW_RADIO_SELECT, radio_select);
+ LGW_RADIO_SELECT is used for communication with the firmware, "radio_select"
+ will be loaded in LGW_RADIO_SELECT at the end of start procedure.
+ */
+
+ lgw_reg_w(LGW_IF_FREQ_0, IF_HZ_TO_REG(if_freq[0])); /* default -384 */
+ lgw_reg_w(LGW_IF_FREQ_1, IF_HZ_TO_REG(if_freq[1])); /* default -128 */
+ lgw_reg_w(LGW_IF_FREQ_2, IF_HZ_TO_REG(if_freq[2])); /* default 128 */
+ lgw_reg_w(LGW_IF_FREQ_3, IF_HZ_TO_REG(if_freq[3])); /* default 384 */
+ lgw_reg_w(LGW_IF_FREQ_4, IF_HZ_TO_REG(if_freq[4])); /* default -384 */
+ lgw_reg_w(LGW_IF_FREQ_5, IF_HZ_TO_REG(if_freq[5])); /* default -128 */
+ lgw_reg_w(LGW_IF_FREQ_6, IF_HZ_TO_REG(if_freq[6])); /* default 128 */
+ lgw_reg_w(LGW_IF_FREQ_7, IF_HZ_TO_REG(if_freq[7])); /* default 384 */
+ lgw_reg_w(LGW_CORR0_DETECT_EN, (if_enable[0] == true) ? lora_multi_sfmask[0] : 0); /* default 0 */
+ lgw_reg_w(LGW_CORR1_DETECT_EN, (if_enable[1] == true) ? lora_multi_sfmask[1] : 0); /* default 0 */
+ lgw_reg_w(LGW_CORR2_DETECT_EN, (if_enable[2] == true) ? lora_multi_sfmask[2] : 0); /* default 0 */
+ lgw_reg_w(LGW_CORR3_DETECT_EN, (if_enable[3] == true) ? lora_multi_sfmask[3] : 0); /* default 0 */
+ lgw_reg_w(LGW_CORR4_DETECT_EN, (if_enable[4] == true) ? lora_multi_sfmask[4] : 0); /* default 0 */
+ lgw_reg_w(LGW_CORR5_DETECT_EN, (if_enable[5] == true) ? lora_multi_sfmask[5] : 0); /* default 0 */
+ lgw_reg_w(LGW_CORR6_DETECT_EN, (if_enable[6] == true) ? lora_multi_sfmask[6] : 0); /* default 0 */
+ lgw_reg_w(LGW_CORR7_DETECT_EN, (if_enable[7] == true) ? lora_multi_sfmask[7] : 0); /* default 0 */
+ lgw_reg_w(LGW_PPM_OFFSET, 0x60); /* as the threshold is 16ms, use 0x60 to enable ppm_offset for SF12 and SF11 @125kHz*/
+ lgw_reg_w(LGW_CONCENTRATOR_MODEM_ENABLE, 1); /* default 0 */
+
+ /* configure LoRa 'stand-alone' modem (IF8) */
+ lgw_reg_w(LGW_IF_FREQ_8, IF_HZ_TO_REG(if_freq[8])); /* MBWSSF modem (default 0) */
+ if (if_enable[8] == true) {
+ lgw_reg_w(LGW_MBWSSF_RADIO_SELECT, if_rf_chain[8]);
+ switch (lora_rx_bw) {
+ case BW_125KHZ:
+ lgw_reg_w(LGW_MBWSSF_MODEM_BW, 0);
+ break;
+ case BW_250KHZ:
+ lgw_reg_w(LGW_MBWSSF_MODEM_BW, 1);
+ break;
+ case BW_500KHZ:
+ lgw_reg_w(LGW_MBWSSF_MODEM_BW, 2);
+ break;
+ default:
+ DEBUG_PRINTF("ERROR: UNEXPECTED VALUE %d IN SWITCH STATEMENT\n", lora_rx_bw);
+ return LGW_HAL_ERROR;
+ }
+ switch (lora_rx_sf) {
+ case DR_LORA_SF7:
+ lgw_reg_w(LGW_MBWSSF_RATE_SF, 7);
+ break;
+ case DR_LORA_SF8:
+ lgw_reg_w(LGW_MBWSSF_RATE_SF, 8);
+ break;
+ case DR_LORA_SF9:
+ lgw_reg_w(LGW_MBWSSF_RATE_SF, 9);
+ break;
+ case DR_LORA_SF10:
+ lgw_reg_w(LGW_MBWSSF_RATE_SF, 10);
+ break;
+ case DR_LORA_SF11:
+ lgw_reg_w(LGW_MBWSSF_RATE_SF, 11);
+ break;
+ case DR_LORA_SF12:
+ lgw_reg_w(LGW_MBWSSF_RATE_SF, 12);
+ break;
+ default:
+ DEBUG_PRINTF("ERROR: UNEXPECTED VALUE %d IN SWITCH STATEMENT\n", lora_rx_sf);
+ return LGW_HAL_ERROR;
+ }
+ lgw_reg_w(LGW_MBWSSF_PPM_OFFSET, lora_rx_ppm_offset); /* default 0 */
+ lgw_reg_w(LGW_MBWSSF_MODEM_ENABLE, 1); /* default 0 */
+ } else {
+ lgw_reg_w(LGW_MBWSSF_MODEM_ENABLE, 0);
+ }
+
+ /* configure FSK modem (IF9) */
+ lgw_reg_w(LGW_IF_FREQ_9, IF_HZ_TO_REG(if_freq[9])); /* FSK modem, default 0 */
+ lgw_reg_w(LGW_FSK_PSIZE, fsk_sync_word_size - 1);
+ lgw_reg_w(LGW_FSK_TX_PSIZE, fsk_sync_word_size - 1);
+ fsk_sync_word_reg = fsk_sync_word << (8 * (8 - fsk_sync_word_size));
+ lgw_reg_w(LGW_FSK_REF_PATTERN_LSB, (uint32_t)(0xFFFFFFFF & fsk_sync_word_reg));
+ lgw_reg_w(LGW_FSK_REF_PATTERN_MSB, (uint32_t)(0xFFFFFFFF & (fsk_sync_word_reg >> 32)));
+ if (if_enable[9] == true) {
+ lgw_reg_w(LGW_FSK_RADIO_SELECT, if_rf_chain[9]);
+ lgw_reg_w(LGW_FSK_BR_RATIO, LGW_XTAL_FREQU / fsk_rx_dr); /* setting the dividing ratio for datarate */
+ lgw_reg_w(LGW_FSK_CH_BW_EXPO, fsk_rx_bw);
+ lgw_reg_w(LGW_FSK_MODEM_ENABLE, 1); /* default 0 */
+ } else {
+ lgw_reg_w(LGW_FSK_MODEM_ENABLE, 0);
+ }
+
+ /* Load firmware */
+ reset_firmware(MCU_ARB);
+ reset_firmware(MCU_AGC);
+ lgw_reg_w(LGW_MCU_RST_0, 1);
+ lgw_reg_w(LGW_MCU_RST_1, 1);
+
+ /* gives the AGC MCU control over radio, RF front-end and filter gain */
+ lgw_reg_w(LGW_FORCE_HOST_RADIO_CTRL, 0);
+ lgw_reg_w(LGW_FORCE_HOST_FE_CTRL, 0);
+ lgw_reg_w(LGW_FORCE_DEC_FILTER_GAIN, 0);
+
+ /* Get MCUs out of reset */
+ lgw_reg_w(LGW_RADIO_SELECT, 0); /* MUST not be = to 1 or 2 at firmware init */
+ lgw_reg_w(LGW_MCU_RST_0, 0);
+ lgw_reg_w(LGW_MCU_RST_1, 0);
+
+ /* Check firmware version */
+ lgw_reg_w(LGW_DBG_AGC_MCU_RAM_ADDR, FW_VERSION_ADDR);
+ lgw_reg_r(LGW_DBG_AGC_MCU_RAM_DATA, &read_val);
+ fw_version = (uint8_t)read_val;
+ if (fw_version != FW_VERSION_AGC) {
+ DEBUG_PRINTF("ERROR: Version of AGC firmware not expected, actual:%d expected:%d\n", fw_version, FW_VERSION_AGC);
+ return LGW_HAL_ERROR;
+ }
+ lgw_reg_w(LGW_DBG_ARB_MCU_RAM_ADDR, FW_VERSION_ADDR);
+ lgw_reg_r(LGW_DBG_ARB_MCU_RAM_DATA, &read_val);
+ fw_version = (uint8_t)read_val;
+ if (fw_version != FW_VERSION_ARB) {
+ DEBUG_PRINTF("ERROR: Version of arbiter firmware not expected, actual:%d expected:%d\n", fw_version, FW_VERSION_ARB);
+ return LGW_HAL_ERROR;
+ }
+
+ DEBUG_MSG("Info: Initialising AGC firmware...\n");
+ wait_us(100); /* Need to wait for long enough here */
+ lgw_reg_r(LGW_MCU_AGC_STATUS, &read_val);
+ if (read_val != 0x10) {
+ DEBUG_PRINTF("ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS1 0x%02X\n", (uint8_t)read_val);
+ return LGW_HAL_ERROR;
+ }
+
+ /* Update Tx gain LUT and start AGC */
+ for (i = 0; i < txgain_lut.size; ++i) {
+ lgw_reg_w(LGW_RADIO_SELECT, AGC_CMD_WAIT); /* start a transaction */
+ wait_us(DELAYSTART);
+ load_val = txgain_lut.lut[i].mix_gain + (16 * txgain_lut.lut[i].dac_gain) + (64 * txgain_lut.lut[i].pa_gain);
+ lgw_reg_w(LGW_RADIO_SELECT, load_val);
+ wait_us(DELAYSTART);
+ lgw_reg_r(LGW_MCU_AGC_STATUS, &read_val);
+ if (read_val != (0x30 + i)) {
+ DEBUG_PRINTF("ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS2 0x%02X\n", (uint8_t)read_val);
+ return LGW_HAL_ERROR;
+ }
+ }
+
+ /* As the AGC fw is waiting for 16 entries, we need to abort the transaction if we get less entries */
+ if (txgain_lut.size < TX_GAIN_LUT_SIZE_MAX) {
+ lgw_reg_w(LGW_RADIO_SELECT, AGC_CMD_WAIT);
+ wait_us(DELAYSTART);
+ load_val = AGC_CMD_ABORT;
+ lgw_reg_w(LGW_RADIO_SELECT, load_val);
+ wait_us(DELAYSTART);
+ lgw_reg_r(LGW_MCU_AGC_STATUS, &read_val);
+ if (read_val != 0x30) {
+ DEBUG_PRINTF("ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS3 0x%02X\n", (uint8_t)read_val);
+ return LGW_HAL_ERROR;
+ }
+ }
+
+ /* Load Tx freq MSBs (always 3 if f > 768 for SX1257 or f > 384 for SX1255 */
+ lgw_reg_w(LGW_RADIO_SELECT, AGC_CMD_WAIT);
+ wait_us(DELAYSTART);
+ lgw_reg_w(LGW_RADIO_SELECT, 3);
+ wait_us(DELAYSTART);
+ lgw_reg_r(LGW_MCU_AGC_STATUS, &read_val);
+ if (read_val != 0x33) {
+ DEBUG_PRINTF("ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS4 0x%02X\n", (uint8_t)read_val);
+ return LGW_HAL_ERROR;
+ }
+
+ /* Load chan_select firmware option */
+ lgw_reg_w(LGW_RADIO_SELECT, AGC_CMD_WAIT);
+ wait_us(DELAYSTART);
+ lgw_reg_w(LGW_RADIO_SELECT, 0);
+ wait_us(DELAYSTART);
+ lgw_reg_r(LGW_MCU_AGC_STATUS, &read_val);
+ if (read_val != 0x30) {
+ DEBUG_PRINTF("ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS5 0x%02X\n", (uint8_t)read_val);
+ return LGW_HAL_ERROR;
+ }
+
+ /* End AGC firmware init and check status */
+ lgw_reg_w(LGW_RADIO_SELECT, AGC_CMD_WAIT);
+ wait_us(DELAYSTART);
+ lgw_reg_w(LGW_RADIO_SELECT, radio_select); /* Load intended value of RADIO_SELECT */
+ wait_us(DELAYSTART);
+ lgw_reg_r(LGW_MCU_AGC_STATUS, &read_val);
+ if (read_val != 0x40) {
+ DEBUG_PRINTF("ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x%02X\n", (uint8_t)read_val);
+ return LGW_HAL_ERROR;
+ }
+
+ /* do not enable GPS event capture */
+ lgw_reg_w(LGW_GPS_EN, 0);
+
+ /* enable radio for V1 */
+#ifndef V2
+ lgw_reg_w(LGW_RADIO_A_EN, 1);
+#endif
+
+ DEBUG_MSG("Info: concentrator restarted...\n");
+
+ return LGW_HAL_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_receive(uint8_t max_pkt, struct lgw_pkt_rx_s *pkt_data) {
+ int nb_pkt_fetch; /* loop variable and return value */
+ struct lgw_pkt_rx_s *p; /* pointer to the current structure in the struct array */
+ uint8_t buff[255 + RX_METADATA_NB]; /* buffer to store the result of SPI read bursts */
+ unsigned sz; /* size of the payload, uses to address metadata */
+ int ifmod; /* type of if_chain/modem a packet was received by */
+ int stat_fifo; /* the packet status as indicated in the FIFO */
+ uint32_t raw_timestamp; /* timestamp when internal 'RX finished' was triggered */
+ uint32_t delay_x, delay_y, delay_z; /* temporary variable for timestamp offset calculation */
+ uint32_t timestamp_correction; /* correction to account for processing delay */
+ uint32_t sf, cr, bw_pow, crc_en, ppm; /* used to calculate timestamp correction */
+
+ /* check input variables */
+ if ((max_pkt == 0) || (max_pkt > LGW_PKT_FIFO_SIZE)) {
+ DEBUG_PRINTF("ERROR: %d = INVALID MAX NUMBER OF PACKETS TO FETCH\n", max_pkt);
+ return LGW_HAL_ERROR;
+ }
+ CHECK_NULL(pkt_data);
+
+ /* Initialize buffer */
+ memset(buff, 0, sizeof buff);
+
+ /* iterate max_pkt times at most */
+ for (nb_pkt_fetch = 0; nb_pkt_fetch < max_pkt; ++nb_pkt_fetch) {
+
+ /* point to the proper struct in the struct array */
+ p = &pkt_data[nb_pkt_fetch];
+
+ /* fetch all the RX FIFO data */
+ lgw_reg_rb(LGW_RX_PACKET_DATA_FIFO_NUM_STORED, buff, 5);
+ /* 0: number of packets available in RX data buffer */
+ /* 1,2: start address of the current packet in RX data buffer */
+ /* 3: CRC status of the current packet */
+ /* 4: size of the current packet payload in byte */
+
+ /* how many packets are in the RX buffer ? Break if zero */
+ if (buff[0] == 0) {
+ break; /* no more packets to fetch, exit out of FOR loop */
+ }
+
+ /* sanity check */
+ if (buff[0] > LGW_PKT_FIFO_SIZE) {
+ DEBUG_PRINTF("WARNING: %u = INVALID NUMBER OF PACKETS TO FETCH, ABORTING\n", buff[0]);
+ break;
+ }
+
+ DEBUG_PRINTF("FIFO content: %x %x %x %x %x\n", buff[0], buff[1], buff[2], buff[3], buff[4]);
+
+ p->size = buff[4];
+ sz = p->size;
+ stat_fifo = buff[3]; /* will be used later, need to save it before overwriting buff */
+
+ /* get payload + metadata */
+ lgw_reg_rb(LGW_RX_DATA_BUF_DATA, buff, sz + RX_METADATA_NB);
+
+ /* copy payload to result struct */
+ memcpy((void *)p->payload, (void *)buff, sz);
+
+ /* process metadata */
+ p->if_chain = buff[sz + 0];
+ if (p->if_chain >= LGW_IF_CHAIN_NB) {
+ DEBUG_PRINTF("WARNING: %u NOT A VALID IF_CHAIN NUMBER, ABORTING\n", p->if_chain);
+ break;
+ }
+ ifmod = ifmod_config[p->if_chain];
+ DEBUG_PRINTF("[%d %d]\n", p->if_chain, ifmod);
+
+ p->rf_chain = (uint8_t)if_rf_chain[p->if_chain];
+ p->freq_hz = (uint32_t)((int32_t)rf_rx_freq[p->rf_chain] + if_freq[p->if_chain]);
+ p->rssi = (float)buff[sz + 5] + rf_rssi_offset[p->rf_chain];
+
+ if ((ifmod == IF_LORA_MULTI) || (ifmod == IF_LORA_STD)) {
+ DEBUG_MSG("Note: LoRa packet\n");
+ switch (stat_fifo & 0x07) {
+ case 5:
+ p->status = STAT_CRC_OK;
+ crc_en = 1;
+ break;
+ case 7:
+ p->status = STAT_CRC_BAD;
+ crc_en = 1;
+ break;
+ case 1:
+ p->status = STAT_NO_CRC;
+ crc_en = 0;
+ break;
+ default:
+ p->status = STAT_UNDEFINED;
+ crc_en = 0;
+ }
+ p->modulation = MOD_LORA;
+ p->snr = ((float)((int8_t)buff[sz + 2])) / 4;
+ p->snr_min = ((float)((int8_t)buff[sz + 3])) / 4;
+ p->snr_max = ((float)((int8_t)buff[sz + 4])) / 4;
+ if (ifmod == IF_LORA_MULTI) {
+ p->bandwidth = BW_125KHZ; /* fixed in hardware */
+ } else {
+ p->bandwidth = lora_rx_bw; /* get the parameter from the config variable */
+ }
+ sf = (buff[sz + 1] >> 4) & 0x0F;
+
+ switch (sf) {
+ case 7:
+ p->datarate = DR_LORA_SF7;
+ break;
+ case 8:
+ p->datarate = DR_LORA_SF8;
+ break;
+ case 9:
+ p->datarate = DR_LORA_SF9;
+ break;
+ case 10:
+ p->datarate = DR_LORA_SF10;
+ break;
+ case 11:
+ p->datarate = DR_LORA_SF11;
+ break;
+ case 12:
+ p->datarate = DR_LORA_SF12;
+ break;
+ default:
+ p->datarate = DR_UNDEFINED;
+ }
+ cr = (buff[sz + 1] >> 1) & 0x07;
+ switch (cr) {
+ case 1:
+ p->coderate = CR_LORA_4_5;
+ break;
+ case 2:
+ p->coderate = CR_LORA_4_6;
+ break;
+ case 3:
+ p->coderate = CR_LORA_4_7;
+ break;
+ case 4:
+ p->coderate = CR_LORA_4_8;
+ break;
+ default:
+ p->coderate = CR_UNDEFINED;
+ }
+
+ /* determine if 'PPM mode' is on, needed for timestamp correction */
+ if (SET_PPM_ON(p->bandwidth, p->datarate)) {
+ ppm = 1;
+ } else {
+ ppm = 0;
+ }
+
+ /* timestamp correction code, base delay */
+ if (ifmod == IF_LORA_STD) { /* if packet was received on the stand-alone LoRa modem */
+ switch (lora_rx_bw) {
+ case BW_125KHZ:
+ delay_x = 64;
+ bw_pow = 1;
+ break;
+ case BW_250KHZ:
+ delay_x = 32;
+ bw_pow = 2;
+ break;
+ case BW_500KHZ:
+ delay_x = 16;
+ bw_pow = 4;
+ break;
+ default:
+ DEBUG_PRINTF("ERROR: UNEXPECTED VALUE %d IN SWITCH STATEMENT\n", p->bandwidth);
+ delay_x = 0;
+ bw_pow = 0;
+ }
+ } else { /* packet was received on one of the sensor channels = 125kHz */
+ delay_x = 114;
+ bw_pow = 1;
+ }
+
+ /* timestamp correction code, variable delay */
+ if ((sf >= 6) && (sf <= 12) && (bw_pow > 0)) {
+ if ((2 * (sz + 2 * crc_en) - (sf - 7)) <= 0) { /* payload fits entirely in first 8 symbols */
+ delay_y = (((1 << (sf - 1)) * (sf + 1)) + (3 * (1 << (sf - 4)))) / bw_pow;
+ delay_z = 32 * (2 * (sz + 2 * crc_en) + 5) / bw_pow;
+ } else {
+ delay_y = (((1 << (sf - 1)) * (sf + 1)) + ((4 - ppm) * (1 << (sf - 4)))) / bw_pow;
+ delay_z = (16 + 4 * cr) * (((2 * (sz + 2 * crc_en) - sf + 6) % (sf - 2 * ppm)) + 1) / bw_pow;
+ }
+ timestamp_correction = delay_x + delay_y + delay_z;
+ } else {
+ timestamp_correction = 0;
+ DEBUG_MSG("WARNING: invalid packet, no timestamp correction\n");
+ }
+
+ /* RSSI correction */
+ if (ifmod == IF_LORA_MULTI) {
+ p->rssi -= RSSI_MULTI_BIAS;
+ }
+
+ } else if (ifmod == IF_FSK_STD) {
+ DEBUG_MSG("Note: FSK packet\n");
+ switch (stat_fifo & 0x07) {
+ case 5:
+ p->status = STAT_CRC_OK;
+ break;
+ case 7:
+ p->status = STAT_CRC_BAD;
+ break;
+ case 1:
+ p->status = STAT_NO_CRC;
+ break;
+ default:
+ p->status = STAT_UNDEFINED;
+ break;
+ }
+ p->modulation = MOD_FSK;
+ p->snr = -128.0;
+ p->snr_min = -128.0;
+ p->snr_max = -128.0;
+ p->bandwidth = fsk_rx_bw;
+ p->datarate = fsk_rx_dr;
+ p->coderate = CR_UNDEFINED;
+ timestamp_correction = ((uint32_t)680000 / fsk_rx_dr) - 20;
+
+ /* RSSI correction */
+ p->rssi = (RSSI_FSK_POLY_0) + ((float)(RSSI_FSK_POLY_1) * p->rssi) + ((float)(RSSI_FSK_POLY_2) * (p->rssi) * (p->rssi));
+ } else {
+ DEBUG_MSG("ERROR: UNEXPECTED PACKET ORIGIN\n");
+ p->status = STAT_UNDEFINED;
+ p->modulation = MOD_UNDEFINED;
+ p->rssi = -128.0;
+ p->snr = -128.0;
+ p->snr_min = -128.0;
+ p->snr_max = -128.0;
+ p->bandwidth = BW_UNDEFINED;
+ p->datarate = DR_UNDEFINED;
+ p->coderate = CR_UNDEFINED;
+ timestamp_correction = 0;
+ }
+
+ raw_timestamp = (uint32_t)buff[sz + 6] + ((uint32_t)buff[sz + 7] << 8) + ((uint32_t)buff[sz + 8] << 16) + ((uint32_t)buff[sz + 9] << 24);
+ p->count_us = raw_timestamp - timestamp_correction + Sx1308.offtmstpstm32; /* corrected with PicoCell offset */
+ p->crc = (uint16_t)buff[sz + 10] + ((uint16_t)buff[sz + 11] << 8);
+
+ /* advance packet FIFO */
+ lgw_reg_w(LGW_RX_PACKET_DATA_FIFO_NUM_STORED, 0);
+ }
+
+ return nb_pkt_fetch;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_send(struct lgw_pkt_tx_s pkt_data) {
+ int i;
+ uint8_t buff[256 + TX_METADATA_NB]; /* buffer to prepare the packet to send + metadata before SPI write burst */
+ uint32_t part_int = 0; /* integer part for PLL register value calculation */
+ uint32_t part_frac = 0; /* fractional part for PLL register value calculation */
+ uint16_t fsk_dr_div; /* divider to configure for target datarate */
+ int transfer_size = 0; /* data to transfer from host to TX databuffer */
+ int payload_offset = 0; /* start of the payload content in the databuffer */
+ uint8_t pow_index = 0; /* 4-bit value to set the firmware TX power */
+ uint8_t target_mix_gain = 0; /* used to select the proper I/Q offset correction */
+ uint32_t count_trig = 0; /* timestamp value in trigger mode corrected for TX start delay */
+
+ /* check input range (segfault prevention) */
+ if (pkt_data.rf_chain >= LGW_RF_CHAIN_NB) {
+ DEBUG_MSG("ERROR: INVALID RF_CHAIN TO SEND PACKETS\n");
+ return LGW_HAL_ERROR;
+ }
+
+ /* check input variables */
+ if (rf_tx_enable[pkt_data.rf_chain] == false) {
+ DEBUG_MSG("ERROR: SELECTED RF_CHAIN IS DISABLED FOR TX ON SELECTED BOARD\n");
+ return LGW_HAL_ERROR;
+ }
+ if (rf_enable[pkt_data.rf_chain] == false) {
+ DEBUG_MSG("ERROR: SELECTED RF_CHAIN IS DISABLED\n");
+ return LGW_HAL_ERROR;
+ }
+ if (!IS_TX_MODE(pkt_data.tx_mode)) {
+ DEBUG_MSG("ERROR: TX_MODE NOT SUPPORTED\n");
+ return LGW_HAL_ERROR;
+ }
+ if (pkt_data.modulation == MOD_LORA) {
+ if (!IS_LORA_BW(pkt_data.bandwidth)) {
+ DEBUG_MSG("ERROR: BANDWIDTH NOT SUPPORTED BY LORA TX\n");
+ return LGW_HAL_ERROR;
+ }
+ if (!IS_LORA_STD_DR(pkt_data.datarate)) {
+ DEBUG_MSG("ERROR: DATARATE NOT SUPPORTED BY LORA TX\n");
+ return LGW_HAL_ERROR;
+ }
+ if (!IS_LORA_CR(pkt_data.coderate)) {
+ DEBUG_MSG("ERROR: CODERATE NOT SUPPORTED BY LORA TX\n");
+ return LGW_HAL_ERROR;
+ }
+ if (pkt_data.size > 255) {
+ DEBUG_MSG("ERROR: PAYLOAD LENGTH TOO BIG FOR LORA TX\n");
+ return LGW_HAL_ERROR;
+ }
+ } else if (pkt_data.modulation == MOD_FSK) {
+ if ((pkt_data.f_dev < 1) || (pkt_data.f_dev > 200)) {
+ DEBUG_MSG("ERROR: TX FREQUENCY DEVIATION OUT OF ACCEPTABLE RANGE\n");
+ return LGW_HAL_ERROR;
+ }
+ if (!IS_FSK_DR(pkt_data.datarate)) {
+ DEBUG_MSG("ERROR: DATARATE NOT SUPPORTED BY FSK IF CHAIN\n");
+ return LGW_HAL_ERROR;
+ }
+ if (pkt_data.size > 255) {
+ DEBUG_MSG("ERROR: PAYLOAD LENGTH TOO BIG FOR FSK TX\n");
+ return LGW_HAL_ERROR;
+ }
+ } else {
+ DEBUG_MSG("ERROR: INVALID TX MODULATION\n");
+ return LGW_HAL_ERROR;
+ }
+
+ /* interpretation of TX power */
+ for (pow_index = txgain_lut.size - 1; pow_index > 0; pow_index--) {
+ if (txgain_lut.lut[pow_index].rf_power <= pkt_data.rf_power) {
+ break;
+ }
+ }
+
+ /* Save radio calibration for next restart */
+ calibration_save();
+
+ /* loading TX imbalance correction */
+ target_mix_gain = txgain_lut.lut[pow_index].mix_gain;
+ if (pkt_data.rf_chain == 0) { /* use radio A calibration table */
+ lgw_reg_w(LGW_TX_OFFSET_I, cal_offset_a_i[target_mix_gain ]);
+ lgw_reg_w(LGW_TX_OFFSET_Q, cal_offset_a_q[target_mix_gain ]);
+ } else { /* use radio B calibration table */
+ lgw_reg_w(LGW_TX_OFFSET_I, cal_offset_b_i[target_mix_gain ]);
+ lgw_reg_w(LGW_TX_OFFSET_Q, cal_offset_b_q[target_mix_gain ]);
+ }
+
+ /* Set digital gain from LUT */
+ lgw_reg_w(LGW_TX_GAIN, txgain_lut.lut[pow_index].dig_gain);
+
+ /* fixed metadata, useful payload and misc metadata compositing */
+ transfer_size = TX_METADATA_NB + pkt_data.size; /* */
+ payload_offset = TX_METADATA_NB; /* start the payload just after the metadata */
+
+ /* metadata 0 to 2, TX PLL frequency */
+ switch (rf_radio_type[0]) { /* we assume that there is only one radio type on the board */
+ case LGW_RADIO_TYPE_SX1255:
+ part_int = pkt_data.freq_hz / (SX125x_32MHz_FRAC << 7); /* integer part, gives the MSB */
+ part_frac = ((pkt_data.freq_hz % (SX125x_32MHz_FRAC << 7)) << 9) / SX125x_32MHz_FRAC; /* fractional part, gives middle part and LSB */
+ break;
+ case LGW_RADIO_TYPE_SX1257:
+ part_int = pkt_data.freq_hz / (SX125x_32MHz_FRAC << 8); /* integer part, gives the MSB */
+ part_frac = ((pkt_data.freq_hz % (SX125x_32MHz_FRAC << 8)) << 8) / SX125x_32MHz_FRAC; /* fractional part, gives middle part and LSB */
+ break;
+ default:
+ DEBUG_PRINTF("ERROR: UNEXPECTED VALUE %d FOR RADIO TYPE\n", rf_radio_type[0]);
+ break;
+ }
+
+ buff[0] = 0xFF & part_int; /* Most Significant Byte */
+ buff[1] = 0xFF & (part_frac >> 8); /* middle byte */
+ buff[2] = 0xFF & part_frac; /* Least Significant Byte */
+
+ /* metadata 3 to 6, timestamp trigger value */
+ /* TX state machine must be triggered at T0 - TX_START_DELAY for packet to start being emitted at T0 */
+ if (pkt_data.tx_mode == TIMESTAMPED) {
+ count_trig = pkt_data.count_us - TX_START_DELAY - Sx1308.offtmstpstm32; /* Corrected with PicoCell offset */
+ buff[3] = 0xFF & (count_trig >> 24);
+ buff[4] = 0xFF & (count_trig >> 16);
+ buff[5] = 0xFF & (count_trig >> 8);
+ buff[6] = 0xFF & count_trig;
+ }
+
+ /* parameters depending on modulation */
+ if (pkt_data.modulation == MOD_LORA) {
+ /* metadata 7, modulation type, radio chain selection and TX power */
+ buff[7] = (0x20 & (pkt_data.rf_chain << 5)) | (0x0F & pow_index); /* bit 4 is 0 -> LoRa modulation */
+
+ buff[8] = 0; /* metadata 8, not used */
+
+ /* metadata 9, CRC, LoRa CR & SF */
+ switch (pkt_data.datarate) {
+ case DR_LORA_SF7:
+ buff[9] = 7;
+ break;
+ case DR_LORA_SF8:
+ buff[9] = 8;
+ break;
+ case DR_LORA_SF9:
+ buff[9] = 9;
+ break;
+ case DR_LORA_SF10:
+ buff[9] = 10;
+ break;
+ case DR_LORA_SF11:
+ buff[9] = 11;
+ break;
+ case DR_LORA_SF12:
+ buff[9] = 12;
+ break;
+ default:
+ DEBUG_PRINTF("ERROR: UNEXPECTED VALUE %d IN SWITCH STATEMENT\n", pkt_data.datarate);
+ }
+ switch (pkt_data.coderate) {
+ case CR_LORA_4_5:
+ buff[9] |= 1 << 4;
+ break;
+ case CR_LORA_4_6:
+ buff[9] |= 2 << 4;
+ break;
+ case CR_LORA_4_7:
+ buff[9] |= 3 << 4;
+ break;
+ case CR_LORA_4_8:
+ buff[9] |= 4 << 4;
+ break;
+ default:
+ DEBUG_PRINTF("ERROR: UNEXPECTED VALUE %d IN SWITCH STATEMENT\n", pkt_data.coderate);
+ }
+ if (pkt_data.no_crc == false) {
+ buff[9] |= 0x80; /* set 'CRC enable' bit */
+ } else {
+ DEBUG_MSG("Info: packet will be sent without CRC\n");
+ }
+
+ /* metadata 10, payload size */
+ buff[10] = pkt_data.size;
+
+ /* metadata 11, implicit header, modulation bandwidth, PPM offset & polarity */
+ switch (pkt_data.bandwidth) {
+ case BW_125KHZ:
+ buff[11] = 0;
+ break;
+ case BW_250KHZ:
+ buff[11] = 1;
+ break;
+ case BW_500KHZ:
+ buff[11] = 2;
+ break;
+ default:
+ DEBUG_PRINTF("ERROR: UNEXPECTED VALUE %d IN SWITCH STATEMENT\n", pkt_data.bandwidth);
+ }
+ if (pkt_data.no_header == true) {
+ buff[11] |= 0x04; /* set 'implicit header' bit */
+ }
+ if (SET_PPM_ON(pkt_data.bandwidth, pkt_data.datarate)) {
+ buff[11] |= 0x08; /* set 'PPM offset' bit at 1 */
+ }
+ if (pkt_data.invert_pol == true) {
+ buff[11] |= 0x10; /* set 'TX polarity' bit at 1 */
+ }
+
+ /* metadata 12 & 13, LoRa preamble size */
+ if (pkt_data.preamble == 0) { /* if not explicit, use recommended LoRa preamble size */
+ pkt_data.preamble = STD_LORA_PREAMBLE;
+ } else if (pkt_data.preamble < MIN_LORA_PREAMBLE) { /* enforce minimum preamble size */
+ pkt_data.preamble = MIN_LORA_PREAMBLE;
+ DEBUG_MSG("Note: preamble length adjusted to respect minimum LoRa preamble size\n");
+ }
+ buff[12] = 0xFF & (pkt_data.preamble >> 8);
+ buff[13] = 0xFF & pkt_data.preamble;
+
+ /* metadata 14 & 15, not used */
+ buff[14] = 0;
+ buff[15] = 0;
+
+ /* MSB of RF frequency is now used in AGC firmware to implement large/narrow filtering in SX1257/55 */
+ buff[0] &= 0x3F; /* Unset 2 MSBs of frequency code */
+ if (pkt_data.bandwidth == BW_500KHZ) {
+ buff[0] |= 0x80; /* Set MSB bit to enlarge analog filter for 500kHz BW */
+ } else if (pkt_data.bandwidth == BW_125KHZ) {
+ buff[0] |= 0x40; /* Set MSB-1 bit to enable digital filter for 125kHz BW */
+ }
+
+ } else if (pkt_data.modulation == MOD_FSK) {
+ /* metadata 7, modulation type, radio chain selection and TX power */
+ buff[7] = (0x20 & (pkt_data.rf_chain << 5)) | 0x10 | (0x0F & pow_index); /* bit 4 is 1 -> FSK modulation */
+
+ buff[8] = 0; /* metadata 8, not used */
+
+ /* metadata 9, frequency deviation */
+ buff[9] = pkt_data.f_dev;
+
+ /* metadata 10, payload size */
+ buff[10] = pkt_data.size;
+ /* TODO: how to handle 255 bytes packets ?!? */
+
+ /* metadata 11, packet mode, CRC, encoding */
+ buff[11] = 0x01 | (pkt_data.no_crc ? 0 : 0x02) | (0x02 << 2); /* always in variable length packet mode, whitening, and CCITT CRC if CRC is not disabled */
+
+ /* metadata 12 & 13, FSK preamble size */
+ if (pkt_data.preamble == 0) { /* if not explicit, use LoRa MAC preamble size */
+ pkt_data.preamble = STD_FSK_PREAMBLE;
+ } else if (pkt_data.preamble < MIN_FSK_PREAMBLE) { /* enforce minimum preamble size */
+ pkt_data.preamble = MIN_FSK_PREAMBLE;
+ DEBUG_MSG("Note: preamble length adjusted to respect minimum FSK preamble size\n");
+ }
+ buff[12] = 0xFF & (pkt_data.preamble >> 8);
+ buff[13] = 0xFF & pkt_data.preamble;
+
+ /* metadata 14 & 15, FSK baudrate */
+ fsk_dr_div = (uint16_t)((uint32_t)LGW_XTAL_FREQU / pkt_data.datarate); /* Ok for datarate between 500bps and 250kbps */
+ buff[14] = 0xFF & (fsk_dr_div >> 8);
+ buff[15] = 0xFF & fsk_dr_div;
+
+ /* insert payload size in the packet for variable mode */
+ buff[16] = pkt_data.size;
+ ++transfer_size; /* one more byte to transfer to the TX modem */
+ ++payload_offset; /* start the payload with one more byte of offset */
+
+ /* MSB of RF frequency is now used in AGC firmware to implement large/narrow filtering in SX1257/55 */
+ buff[0] &= 0x7F; /* Always use narrow band for FSK (force MSB to 0) */
+
+ } else {
+ DEBUG_MSG("ERROR: INVALID TX MODULATION..\n");
+ return LGW_HAL_ERROR;
+ }
+
+ /* copy payload from user struct to buffer containing metadata */
+ memcpy((void *)(buff + payload_offset), (void *)(pkt_data.payload), pkt_data.size);
+
+ /* reset TX command flags */
+ lgw_abort_tx();
+
+ /* put metadata + payload in the TX data buffer */
+ lgw_reg_w(LGW_TX_DATA_BUF_ADDR, 0);
+ lgw_reg_wb(LGW_TX_DATA_BUF_DATA, buff, transfer_size);
+ DEBUG_ARRAY(i, transfer_size, buff);
+
+ switch (pkt_data.tx_mode) {
+ case IMMEDIATE:
+ lgw_reg_w(LGW_TX_TRIG_IMMEDIATE, 1);
+ break;
+
+ case TIMESTAMPED:
+ lgw_reg_w(LGW_TX_TRIG_DELAYED, 1);
+ break;
+
+ case ON_GPS:
+ lgw_reg_w(LGW_TX_TRIG_GPS, 1);
+ break;
+
+ default:
+ DEBUG_PRINTF("ERROR: UNEXPECTED VALUE %d IN SWITCH STATEMENT\n", pkt_data.tx_mode);
+ return LGW_HAL_ERROR;
+ }
+
+ DEBUG_MSG("Note: lgw_send() done.\n");
+
+ return LGW_HAL_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_status(uint8_t select, uint8_t *code) {
+ int32_t read_value;
+
+ /* check input variables */
+ CHECK_NULL(code);
+
+ if (select == TX_STATUS) {
+ lgw_reg_r(LGW_TX_STATUS, &read_value);
+ if ((read_value & 0x10) == 0) { /* bit 4 @1: TX programmed */
+ *code = TX_FREE;
+ } else if ((read_value & 0x60) != 0) { /* bit 5 or 6 @1: TX sequence */
+ *code = TX_EMITTING;
+ } else {
+ *code = TX_SCHEDULED;
+ }
+ return LGW_HAL_SUCCESS;
+
+ } else if (select == RX_STATUS) {
+ *code = RX_STATUS_UNKNOWN; /* todo */
+ return LGW_HAL_SUCCESS;
+
+ } else {
+ DEBUG_MSG("ERROR: SELECTION INVALID, NO STATUS TO RETURN\n");
+ return LGW_HAL_ERROR;
+ }
+
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_abort_tx(void) {
+ int i;
+
+ i = lgw_reg_w(LGW_TX_TRIG_ALL, 0);
+
+ if (i == LGW_REG_SUCCESS) {
+ return LGW_HAL_SUCCESS;
+ } else {
+ return LGW_HAL_ERROR;
+ }
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_get_trigcnt(uint32_t* trig_cnt_us) {
+ int i;
+ int32_t val;
+
+ i = lgw_reg_r(LGW_TIMESTAMP, &val);
+ if (i == LGW_REG_SUCCESS) {
+ *trig_cnt_us = (uint32_t)val;
+ return LGW_HAL_SUCCESS;
+ } else {
+ return LGW_HAL_ERROR;
+ }
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+const char* lgw_version_info() {
+ return lgw_version_string;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+uint32_t lgw_time_on_air(struct lgw_pkt_tx_s *packet) {
+ int32_t val;
+ uint8_t SF, H, DE;
+ uint16_t BW;
+ uint32_t payloadSymbNb, Tpacket;
+ double Tsym, Tpreamble, Tpayload, Tfsk;
+
+ if (packet == NULL) {
+ DEBUG_MSG("ERROR: Failed to compute time on air, wrong parameter\n");
+ return 0;
+ }
+
+ if (packet->modulation == MOD_LORA) {
+ /* Get bandwidth */
+ val = lgw_bw_getval(packet->bandwidth);
+ if (val != -1) {
+ BW = (uint16_t)(val / 1E3);
+ } else {
+ DEBUG_PRINTF("ERROR: Cannot compute time on air for this packet, unsupported bandwidth (0x%02X)\n", packet->bandwidth);
+ return 0;
+ }
+
+ /* Get datarate */
+ val = lgw_sf_getval(packet->datarate);
+ if (val != -1) {
+ SF = (uint8_t)val;
+ } else {
+ DEBUG_PRINTF("ERROR: Cannot compute time on air for this packet, unsupported datarate (0x%02X)\n", packet->datarate);
+ return 0;
+ }
+
+ /* Duration of 1 symbol */
+ Tsym = (2 ^ SF) / BW;
+
+ /* Duration of preamble */
+ Tpreamble = (8 + 4.25) * Tsym; /* 8 programmed symbols in preamble */
+
+ /* Duration of payload */
+ H = (packet->no_header == false) ? 0 : 1; /* header is always enabled, except for beacons */
+ DE = (SF >= 11) ? 1 : 0; /* Low datarate optimization enabled for SF11 and SF12 */
+
+ payloadSymbNb = 8 + (ceil((double)(8 * packet->size - 4 * SF + 28 + 16 - 20 * H) / (double)(4 * (SF - 2 * DE))) * (packet->coderate + 4)); /* Explicitely cast to double to keep precision of the division */
+
+ Tpayload = payloadSymbNb * Tsym;
+
+ /* Duration of packet */
+ Tpacket = Tpreamble + Tpayload;
+ } else if (packet->modulation == MOD_FSK) {
+ /* PREAMBLE + SYNC_WORD + PKT_LEN + PKT_PAYLOAD + CRC
+ PREAMBLE: default 5 bytes
+ SYNC_WORD: default 3 bytes
+ PKT_LEN: 1 byte (variable length mode)
+ PKT_PAYLOAD: x bytes
+ CRC: 0 or 2 bytes
+ */
+ Tfsk = (8 * (double)(packet->preamble + fsk_sync_word_size + 1 + packet->size + ((packet->no_crc == true) ? 0 : 2)) / (double)packet->datarate) * 1E3;
+
+ /* Duration of packet */
+ Tpacket = (uint32_t)Tfsk + 1; /* add margin for rounding */
+ } else {
+ Tpacket = 0;
+ DEBUG_PRINTF("ERROR: Cannot compute time on air for this packet, unsupported modulation (0x%02X)\n", packet->modulation);
+ }
+
+ return Tpacket;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+void lgw_calibration_offset_transfer(uint8_t idx_start, uint8_t idx_nb) {
+ int i;
+ int read_val;
+
+ DEBUG_PRINTF("start calibration for index [%u-%u]\n", idx_start, idx_start + idx_nb);
+
+ /* Get 'idx_nb' calibration offsets from AGC FW, and put it in the local
+ calibration offsets array, at 'idx_start' index position */
+ for(i = 0; i < idx_nb; ++i) {
+ lgw_reg_w(LGW_DBG_AGC_MCU_RAM_ADDR, 0xA0 + i);
+ wait_ms(1);
+ lgw_reg_r(LGW_DBG_AGC_MCU_RAM_DATA, &read_val);
+ wait_ms(1);
+ cal_offset_a_i[i + idx_start] = (int8_t)read_val;
+ lgw_reg_w(LGW_DBG_AGC_MCU_RAM_ADDR, 0xA8 + i);
+ wait_ms(1);
+ lgw_reg_r(LGW_DBG_AGC_MCU_RAM_DATA, &read_val);
+ wait_ms(1);
+ cal_offset_a_q[i + idx_start] = (int8_t)read_val;
+ lgw_reg_w(LGW_DBG_AGC_MCU_RAM_ADDR, 0xB0 + i);
+ wait_ms(1);
+ lgw_reg_r(LGW_DBG_AGC_MCU_RAM_DATA, &read_val);
+ wait_ms(1);
+ cal_offset_b_i[i + idx_start] = (int8_t)read_val;
+ lgw_reg_w(LGW_DBG_AGC_MCU_RAM_ADDR, 0xB8 + i);
+ wait_ms(1);
+ lgw_reg_r(LGW_DBG_AGC_MCU_RAM_DATA, &read_val);
+ wait_ms(1);
+ cal_offset_b_q[i + idx_start] = (int8_t)read_val;
+ }
+
+ /* Fill the first 5 offsets [0-4] with the value of index 5 */
+ for(i = 0; i < 5; i++) {
+ cal_offset_a_i[i] = cal_offset_a_i[5];
+ cal_offset_a_q[i] = cal_offset_a_q[5];
+ cal_offset_b_i[i] = cal_offset_b_i[5];
+ cal_offset_b_q[i] = cal_offset_b_q[5];
+ }
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+void calibration_save(void) {
+ lgw_reg_r(LGW_IQ_MISMATCH_A_AMP_COEFF, &iqrxtab[0]);
+ lgw_reg_r(LGW_IQ_MISMATCH_A_PHI_COEFF, &iqrxtab[1]);
+ lgw_reg_r(LGW_IQ_MISMATCH_B_AMP_COEFF, &iqrxtab[2]);
+ lgw_reg_r(LGW_IQ_MISMATCH_B_PHI_COEFF, &iqrxtab[3]);
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+void calibration_reload(void) {
+ lgw_reg_w(LGW_IQ_MISMATCH_A_AMP_COEFF, iqrxtab[0]);
+ lgw_reg_w(LGW_IQ_MISMATCH_A_PHI_COEFF, iqrxtab[1]);
+ lgw_reg_w(LGW_IQ_MISMATCH_B_AMP_COEFF, iqrxtab[2]);
+ lgw_reg_w(LGW_IQ_MISMATCH_B_PHI_COEFF, iqrxtab[3]);
+}
+
+/* --- EOF ------------------------------------------------------------------ */
diff -r 000000000000 -r c76361bd82e8 src/SX1308HAL/src/loragw_reg.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/SX1308HAL/src/loragw_reg.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,580 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech
+
+
+*/
+#include "SX1308.h"
+#include "loragw_reg.h"
+#include "board.h"
+
+/* -------------------------------------------------------------------------- */
+/* --- PRIVATE CONSTANTS ---------------------------------------------------- */
+
+#define PAGE_ADDR 0x00
+#define PAGE_MASK 0x03
+
+const struct lgw_reg_s loregs[LGW_TOTALREGS] = {
+ {-1, 0, 0, 0, 2, 0, 0}, /* PAGE_REG */
+ {-1, 0, 7, 0, 1, 0, 0}, /* SOFT_RESET */
+ {-1, 1, 0, 0, 8, 1, 103}, /* VERSION */
+ {-1, 2, 0, 0, 16, 0, 0}, /* RX_DATA_BUF_ADDR */
+ {-1, 4, 0, 0, 8, 0, 0}, /* RX_DATA_BUF_DATA */
+ {-1, 5, 0, 0, 8, 0, 0}, /* TX_DATA_BUF_ADDR */
+ {-1, 6, 0, 0, 8, 0, 0}, /* TX_DATA_BUF_DATA */
+ {-1, 7, 0, 0, 8, 0, 0}, /* CAPTURE_RAM_ADDR */
+ {-1, 8, 0, 0, 8, 1, 0}, /* CAPTURE_RAM_DATA */
+ {-1, 9, 0, 0, 8, 0, 0}, /* MCU_PROM_ADDR */
+ {-1, 10, 0, 0, 8, 0, 0}, /* MCU_PROM_DATA */
+ {-1, 11, 0, 0, 8, 0, 0}, /* RX_PACKET_DATA_FIFO_NUM_STORED */
+ {-1, 12, 0, 0, 16, 1, 0}, /* RX_PACKET_DATA_FIFO_ADDR_POINTER */
+ {-1, 14, 0, 0, 8, 1, 0}, /* RX_PACKET_DATA_FIFO_STATUS */
+ {-1, 15, 0, 0, 8, 1, 0}, /* RX_PACKET_DATA_FIFO_PAYLOAD_SIZE */
+ {-1, 16, 0, 0, 1, 0, 0}, /* MBWSSF_MODEM_ENABLE */
+ {-1, 16, 1, 0, 1, 0, 0}, /* CONCENTRATOR_MODEM_ENABLE */
+ {-1, 16, 2, 0, 1, 0, 0}, /* FSK_MODEM_ENABLE */
+ {-1, 16, 3, 0, 1, 0, 0}, /* GLOBAL_EN */
+ {-1, 17, 0, 0, 1, 0, 1}, /* CLK32M_EN */
+ {-1, 17, 1, 0, 1, 0, 1}, /* CLKHS_EN */
+ {-1, 18, 0, 0, 1, 0, 0}, /* START_BIST0 */
+ {-1, 18, 1, 0, 1, 0, 0}, /* START_BIST1 */
+ {-1, 18, 2, 0, 1, 0, 0}, /* CLEAR_BIST0 */
+ {-1, 18, 3, 0, 1, 0, 0}, /* CLEAR_BIST1 */
+ {-1, 19, 0, 0, 1, 1, 0}, /* BIST0_FINISHED */
+ {-1, 19, 1, 0, 1, 1, 0}, /* BIST1_FINISHED */
+ {-1, 20, 0, 0, 1, 1, 0}, /* MCU_AGC_PROG_RAM_BIST_STATUS */
+ {-1, 20, 1, 0, 1, 1, 0}, /* MCU_ARB_PROG_RAM_BIST_STATUS */
+ {-1, 20, 2, 0, 1, 1, 0}, /* CAPTURE_RAM_BIST_STATUS */
+ {-1, 20, 3, 0, 1, 1, 0}, /* CHAN_FIR_RAM0_BIST_STATUS */
+ {-1, 20, 4, 0, 1, 1, 0}, /* CHAN_FIR_RAM1_BIST_STATUS */
+ {-1, 21, 0, 0, 1, 1, 0}, /* CORR0_RAM_BIST_STATUS */
+ {-1, 21, 1, 0, 1, 1, 0}, /* CORR1_RAM_BIST_STATUS */
+ {-1, 21, 2, 0, 1, 1, 0}, /* CORR2_RAM_BIST_STATUS */
+ {-1, 21, 3, 0, 1, 1, 0}, /* CORR3_RAM_BIST_STATUS */
+ {-1, 21, 4, 0, 1, 1, 0}, /* CORR4_RAM_BIST_STATUS */
+ {-1, 21, 5, 0, 1, 1, 0}, /* CORR5_RAM_BIST_STATUS */
+ {-1, 21, 6, 0, 1, 1, 0}, /* CORR6_RAM_BIST_STATUS */
+ {-1, 21, 7, 0, 1, 1, 0}, /* CORR7_RAM_BIST_STATUS */
+ {-1, 22, 0, 0, 1, 1, 0}, /* MODEM0_RAM0_BIST_STATUS */
+ {-1, 22, 1, 0, 1, 1, 0}, /* MODEM1_RAM0_BIST_STATUS */
+ {-1, 22, 2, 0, 1, 1, 0}, /* MODEM2_RAM0_BIST_STATUS */
+ {-1, 22, 3, 0, 1, 1, 0}, /* MODEM3_RAM0_BIST_STATUS */
+ {-1, 22, 4, 0, 1, 1, 0}, /* MODEM4_RAM0_BIST_STATUS */
+ {-1, 22, 5, 0, 1, 1, 0}, /* MODEM5_RAM0_BIST_STATUS */
+ {-1, 22, 6, 0, 1, 1, 0}, /* MODEM6_RAM0_BIST_STATUS */
+ {-1, 22, 7, 0, 1, 1, 0}, /* MODEM7_RAM0_BIST_STATUS */
+ {-1, 23, 0, 0, 1, 1, 0}, /* MODEM0_RAM1_BIST_STATUS */
+ {-1, 23, 1, 0, 1, 1, 0}, /* MODEM1_RAM1_BIST_STATUS */
+ {-1, 23, 2, 0, 1, 1, 0}, /* MODEM2_RAM1_BIST_STATUS */
+ {-1, 23, 3, 0, 1, 1, 0}, /* MODEM3_RAM1_BIST_STATUS */
+ {-1, 23, 4, 0, 1, 1, 0}, /* MODEM4_RAM1_BIST_STATUS */
+ {-1, 23, 5, 0, 1, 1, 0}, /* MODEM5_RAM1_BIST_STATUS */
+ {-1, 23, 6, 0, 1, 1, 0}, /* MODEM6_RAM1_BIST_STATUS */
+ {-1, 23, 7, 0, 1, 1, 0}, /* MODEM7_RAM1_BIST_STATUS */
+ {-1, 24, 0, 0, 1, 1, 0}, /* MODEM0_RAM2_BIST_STATUS */
+ {-1, 24, 1, 0, 1, 1, 0}, /* MODEM1_RAM2_BIST_STATUS */
+ {-1, 24, 2, 0, 1, 1, 0}, /* MODEM2_RAM2_BIST_STATUS */
+ {-1, 24, 3, 0, 1, 1, 0}, /* MODEM3_RAM2_BIST_STATUS */
+ {-1, 24, 4, 0, 1, 1, 0}, /* MODEM4_RAM2_BIST_STATUS */
+ {-1, 24, 5, 0, 1, 1, 0}, /* MODEM5_RAM2_BIST_STATUS */
+ {-1, 24, 6, 0, 1, 1, 0}, /* MODEM6_RAM2_BIST_STATUS */
+ {-1, 24, 7, 0, 1, 1, 0}, /* MODEM7_RAM2_BIST_STATUS */
+ {-1, 25, 0, 0, 1, 1, 0}, /* MODEM_MBWSSF_RAM0_BIST_STATUS */
+ {-1, 25, 1, 0, 1, 1, 0}, /* MODEM_MBWSSF_RAM1_BIST_STATUS */
+ {-1, 25, 2, 0, 1, 1, 0}, /* MODEM_MBWSSF_RAM2_BIST_STATUS */
+ {-1, 26, 0, 0, 1, 1, 0}, /* MCU_AGC_DATA_RAM_BIST0_STATUS */
+ {-1, 26, 1, 0, 1, 1, 0}, /* MCU_AGC_DATA_RAM_BIST1_STATUS */
+ {-1, 26, 2, 0, 1, 1, 0}, /* MCU_ARB_DATA_RAM_BIST0_STATUS */
+ {-1, 26, 3, 0, 1, 1, 0}, /* MCU_ARB_DATA_RAM_BIST1_STATUS */
+ {-1, 26, 4, 0, 1, 1, 0}, /* TX_TOP_RAM_BIST0_STATUS */
+ {-1, 26, 5, 0, 1, 1, 0}, /* TX_TOP_RAM_BIST1_STATUS */
+ {-1, 26, 6, 0, 1, 1, 0}, /* DATA_MNGT_RAM_BIST0_STATUS */
+ {-1, 26, 7, 0, 1, 1, 0}, /* DATA_MNGT_RAM_BIST1_STATUS */
+ {-1, 27, 0, 0, 4, 0, 0}, /* GPIO_SELECT_INPUT */
+ {-1, 28, 0, 0, 4, 0, 0}, /* GPIO_SELECT_OUTPUT */
+ {-1, 29, 0, 0, 5, 0, 0}, /* GPIO_MODE */
+ {-1, 30, 0, 0, 5, 1, 0}, /* GPIO_PIN_REG_IN */
+ {-1, 31, 0, 0, 5, 0, 0}, /* GPIO_PIN_REG_OUT */
+ {-1, 32, 0, 0, 8, 1, 0}, /* MCU_AGC_STATUS */
+ {-1, 125, 0, 0, 8, 1, 0}, /* MCU_ARB_STATUS */
+ {-1, 126, 0, 0, 8, 1, 1}, /* CHIP_ID */
+ {-1, 127, 0, 0, 1, 0, 1}, /* EMERGENCY_FORCE_HOST_CTRL */
+ {0, 33, 0, 0, 1, 0, 0}, /* RX_INVERT_IQ */
+ {0, 33, 1, 0, 1, 0, 1}, /* MODEM_INVERT_IQ */
+ {0, 33, 2, 0, 1, 0, 0}, /* MBWSSF_MODEM_INVERT_IQ */
+ {0, 33, 3, 0, 1, 0, 0}, /* RX_EDGE_SELECT */
+ {0, 33, 4, 0, 1, 0, 0}, /* MISC_RADIO_EN */
+ {0, 33, 5, 0, 1, 0, 0}, /* FSK_MODEM_INVERT_IQ */
+ {0, 34, 0, 0, 4, 0, 7}, /* FILTER_GAIN */
+ {0, 35, 0, 0, 8, 0, 240}, /* RADIO_SELECT */
+ {0, 36, 0, 1, 13, 0, -384}, /* IF_FREQ_0 */
+ {0, 38, 0, 1, 13, 0, -128}, /* IF_FREQ_1 */
+ {0, 40, 0, 1, 13, 0, 128}, /* IF_FREQ_2 */
+ {0, 42, 0, 1, 13, 0, 384}, /* IF_FREQ_3 */
+ {0, 44, 0, 1, 13, 0, -384}, /* IF_FREQ_4 */
+ {0, 46, 0, 1, 13, 0, -128}, /* IF_FREQ_5 */
+ {0, 48, 0, 1, 13, 0, 128}, /* IF_FREQ_6 */
+ {0, 50, 0, 1, 13, 0, 384}, /* IF_FREQ_7 */
+ {0, 52, 0, 1, 13, 0, 0}, /* IF_FREQ_8 */
+ {0, 54, 0, 1, 13, 0, 0}, /* IF_FREQ_9 */
+ {0, 64, 0, 0, 1, 0, 0}, /* CHANN_OVERRIDE_AGC_GAIN */
+ {0, 64, 1, 0, 4, 0, 7}, /* CHANN_AGC_GAIN */
+ {0, 65, 0, 0, 7, 0, 0}, /* CORR0_DETECT_EN */
+ {0, 66, 0, 0, 7, 0, 0}, /* CORR1_DETECT_EN */
+ {0, 67, 0, 0, 7, 0, 0}, /* CORR2_DETECT_EN */
+ {0, 68, 0, 0, 7, 0, 0}, /* CORR3_DETECT_EN */
+ {0, 69, 0, 0, 7, 0, 0}, /* CORR4_DETECT_EN */
+ {0, 70, 0, 0, 7, 0, 0}, /* CORR5_DETECT_EN */
+ {0, 71, 0, 0, 7, 0, 0}, /* CORR6_DETECT_EN */
+ {0, 72, 0, 0, 7, 0, 0}, /* CORR7_DETECT_EN */
+ {0, 73, 0, 0, 1, 0, 0}, /* CORR_SAME_PEAKS_OPTION_SF6 */
+ {0, 73, 1, 0, 1, 0, 1}, /* CORR_SAME_PEAKS_OPTION_SF7 */
+ {0, 73, 2, 0, 1, 0, 1}, /* CORR_SAME_PEAKS_OPTION_SF8 */
+ {0, 73, 3, 0, 1, 0, 1}, /* CORR_SAME_PEAKS_OPTION_SF9 */
+ {0, 73, 4, 0, 1, 0, 1}, /* CORR_SAME_PEAKS_OPTION_SF10 */
+ {0, 73, 5, 0, 1, 0, 1}, /* CORR_SAME_PEAKS_OPTION_SF11 */
+ {0, 73, 6, 0, 1, 0, 1}, /* CORR_SAME_PEAKS_OPTION_SF12 */
+ {0, 74, 0, 0, 4, 0, 4}, /* CORR_SIG_NOISE_RATIO_SF6 */
+ {0, 74, 4, 0, 4, 0, 4}, /* CORR_SIG_NOISE_RATIO_SF7 */
+ {0, 75, 0, 0, 4, 0, 4}, /* CORR_SIG_NOISE_RATIO_SF8 */
+ {0, 75, 4, 0, 4, 0, 4}, /* CORR_SIG_NOISE_RATIO_SF9 */
+ {0, 76, 0, 0, 4, 0, 4}, /* CORR_SIG_NOISE_RATIO_SF10 */
+ {0, 76, 4, 0, 4, 0, 4}, /* CORR_SIG_NOISE_RATIO_SF11 */
+ {0, 77, 0, 0, 4, 0, 4}, /* CORR_SIG_NOISE_RATIO_SF12 */
+ {0, 78, 0, 0, 4, 0, 4}, /* CORR_NUM_SAME_PEAK */
+ {0, 78, 4, 0, 3, 0, 5}, /* CORR_MAC_GAIN */
+ {0, 81, 0, 0, 12, 0, 0}, /* ADJUST_MODEM_START_OFFSET_RDX4 */
+ {0, 83, 0, 0, 12, 0, 4092}, /* ADJUST_MODEM_START_OFFSET_SF12_RDX4 */
+ {0, 85, 0, 0, 8, 0, 7}, /* DBG_CORR_SELECT_SF */
+ {0, 86, 0, 0, 8, 0, 0}, /* DBG_CORR_SELECT_CHANNEL */
+ {0, 87, 0, 0, 8, 1, 0}, /* DBG_DETECT_CPT */
+ {0, 88, 0, 0, 8, 1, 0}, /* DBG_SYMB_CPT */
+ {0, 89, 0, 0, 1, 0, 1}, /* CHIRP_INVERT_RX */
+ {0, 89, 1, 0, 1, 0, 1}, /* DC_NOTCH_EN */
+ {0, 90, 0, 0, 1, 0, 0}, /* IMPLICIT_CRC_EN */
+ {0, 90, 1, 0, 3, 0, 0}, /* IMPLICIT_CODING_RATE */
+ {0, 91, 0, 0, 8, 0, 0}, /* IMPLICIT_PAYLOAD_LENGHT */
+ {0, 92, 0, 0, 8, 0, 29}, /* FREQ_TO_TIME_INVERT */
+ {0, 93, 0, 0, 6, 0, 9}, /* FREQ_TO_TIME_DRIFT */
+ {0, 94, 0, 0, 2, 0, 2}, /* PAYLOAD_FINE_TIMING_GAIN */
+ {0, 94, 2, 0, 2, 0, 1}, /* PREAMBLE_FINE_TIMING_GAIN */
+ {0, 94, 4, 0, 2, 0, 0}, /* TRACKING_INTEGRAL */
+ {0, 95, 0, 0, 4, 0, 1}, /* FRAME_SYNCH_PEAK1_POS */
+ {0, 95, 4, 0, 4, 0, 2}, /* FRAME_SYNCH_PEAK2_POS */
+ {0, 96, 0, 0, 16, 0, 10}, /* PREAMBLE_SYMB1_NB */
+ {0, 98, 0, 0, 1, 0, 1}, /* FRAME_SYNCH_GAIN */
+ {0, 98, 1, 0, 1, 0, 1}, /* SYNCH_DETECT_TH */
+ {0, 99, 0, 0, 4, 0, 8}, /* LLR_SCALE */
+ {0, 99, 4, 0, 2, 0, 2}, /* SNR_AVG_CST */
+ {0, 100, 0, 0, 7, 0, 0}, /* PPM_OFFSET */
+ {0, 101, 0, 0, 8, 0, 255}, /* MAX_PAYLOAD_LEN */
+ {0, 102, 0, 0, 1, 0, 1}, /* ONLY_CRC_EN */
+ {0, 103, 0, 0, 8, 0, 0}, /* ZERO_PAD */
+ {0, 104, 0, 0, 4, 0, 8}, /* DEC_GAIN_OFFSET */
+ {0, 104, 4, 0, 4, 0, 7}, /* CHAN_GAIN_OFFSET */
+ {0, 105, 1, 0, 1, 0, 1}, /* FORCE_HOST_RADIO_CTRL */
+ {0, 105, 2, 0, 1, 0, 1}, /* FORCE_HOST_FE_CTRL */
+ {0, 105, 3, 0, 1, 0, 1}, /* FORCE_DEC_FILTER_GAIN */
+ {0, 106, 0, 0, 1, 0, 1}, /* MCU_RST_0 */
+ {0, 106, 1, 0, 1, 0, 1}, /* MCU_RST_1 */
+ {0, 106, 2, 0, 1, 0, 0}, /* MCU_SELECT_MUX_0 */
+ {0, 106, 3, 0, 1, 0, 0}, /* MCU_SELECT_MUX_1 */
+ {0, 106, 4, 0, 1, 1, 0}, /* MCU_CORRUPTION_DETECTED_0 */
+ {0, 106, 5, 0, 1, 1, 0}, /* MCU_CORRUPTION_DETECTED_1 */
+ {0, 106, 6, 0, 1, 0, 0}, /* MCU_SELECT_EDGE_0 */
+ {0, 106, 7, 0, 1, 0, 0}, /* MCU_SELECT_EDGE_1 */
+ {0, 107, 0, 0, 8, 0, 1}, /* CHANN_SELECT_RSSI */
+ {0, 108, 0, 0, 8, 0, 32}, /* RSSI_BB_DEFAULT_VALUE */
+ {0, 109, 0, 0, 8, 0, 100}, /* RSSI_DEC_DEFAULT_VALUE */
+ {0, 110, 0, 0, 8, 0, 100}, /* RSSI_CHANN_DEFAULT_VALUE */
+ {0, 111, 0, 0, 5, 0, 7}, /* RSSI_BB_FILTER_ALPHA */
+ {0, 112, 0, 0, 5, 0, 5}, /* RSSI_DEC_FILTER_ALPHA */
+ {0, 113, 0, 0, 5, 0, 8}, /* RSSI_CHANN_FILTER_ALPHA */
+ {0, 114, 0, 0, 6, 0, 0}, /* IQ_MISMATCH_A_AMP_COEFF */
+ {0, 115, 0, 0, 6, 0, 0}, /* IQ_MISMATCH_A_PHI_COEFF */
+ {0, 116, 0, 0, 6, 0, 0}, /* IQ_MISMATCH_B_AMP_COEFF */
+ {0, 116, 6, 0, 1, 0, 0}, /* IQ_MISMATCH_B_SEL_I */
+ {0, 117, 0, 0, 6, 0, 0}, /* IQ_MISMATCH_B_PHI_COEFF */
+ {1, 33, 0, 0, 1, 0, 0}, /* TX_TRIG_IMMEDIATE */
+ {1, 33, 1, 0, 1, 0, 0}, /* TX_TRIG_DELAYED */
+ {1, 33, 2, 0, 1, 0, 0}, /* TX_TRIG_GPS */
+ {1, 34, 0, 0, 16, 0, 0}, /* TX_START_DELAY */
+ {1, 36, 0, 0, 4, 0, 1}, /* TX_FRAME_SYNCH_PEAK1_POS */
+ {1, 36, 4, 0, 4, 0, 2}, /* TX_FRAME_SYNCH_PEAK2_POS */
+ {1, 37, 0, 0, 3, 0, 0}, /* TX_RAMP_DURATION */
+ {1, 39, 0, 1, 8, 0, 0}, /* TX_OFFSET_I */
+ {1, 40, 0, 1, 8, 0, 0}, /* TX_OFFSET_Q */
+ {1, 41, 0, 0, 1, 0, 0}, /* TX_MODE */
+ {1, 41, 1, 0, 4, 0, 0}, /* TX_ZERO_PAD */
+ {1, 41, 5, 0, 1, 0, 0}, /* TX_EDGE_SELECT */
+ {1, 41, 6, 0, 1, 0, 0}, /* TX_EDGE_SELECT_TOP */
+ {1, 42, 0, 0, 2, 0, 0}, /* TX_GAIN */
+ {1, 42, 2, 0, 3, 0, 5}, /* TX_CHIRP_LOW_PASS */
+ {1, 42, 5, 0, 2, 0, 0}, /* TX_FCC_WIDEBAND */
+ {1, 42, 7, 0, 1, 0, 1}, /* TX_SWAP_IQ */
+ {1, 43, 0, 0, 1, 0, 0}, /* MBWSSF_IMPLICIT_HEADER */
+ {1, 43, 1, 0, 1, 0, 0}, /* MBWSSF_IMPLICIT_CRC_EN */
+ {1, 43, 2, 0, 3, 0, 0}, /* MBWSSF_IMPLICIT_CODING_RATE */
+ {1, 44, 0, 0, 8, 0, 0}, /* MBWSSF_IMPLICIT_PAYLOAD_LENGHT */
+ {1, 45, 0, 0, 1, 0, 1}, /* MBWSSF_AGC_FREEZE_ON_DETECT */
+ {1, 46, 0, 0, 4, 0, 1}, /* MBWSSF_FRAME_SYNCH_PEAK1_POS */
+ {1, 46, 4, 0, 4, 0, 2}, /* MBWSSF_FRAME_SYNCH_PEAK2_POS */
+ {1, 47, 0, 0, 16, 0, 10}, /* MBWSSF_PREAMBLE_SYMB1_NB */
+ {1, 49, 0, 0, 1, 0, 1}, /* MBWSSF_FRAME_SYNCH_GAIN */
+ {1, 49, 1, 0, 1, 0, 1}, /* MBWSSF_SYNCH_DETECT_TH */
+ {1, 50, 0, 0, 8, 0, 10}, /* MBWSSF_DETECT_MIN_SINGLE_PEAK */
+ {1, 51, 0, 0, 3, 0, 3}, /* MBWSSF_DETECT_TRIG_SAME_PEAK_NB */
+ {1, 52, 0, 0, 8, 0, 29}, /* MBWSSF_FREQ_TO_TIME_INVERT */
+ {1, 53, 0, 0, 6, 0, 36}, /* MBWSSF_FREQ_TO_TIME_DRIFT */
+ {1, 54, 0, 0, 12, 0, 0}, /* MBWSSF_PPM_CORRECTION */
+ {1, 56, 0, 0, 2, 0, 2}, /* MBWSSF_PAYLOAD_FINE_TIMING_GAIN */
+ {1, 56, 2, 0, 2, 0, 1}, /* MBWSSF_PREAMBLE_FINE_TIMING_GAIN */
+ {1, 56, 4, 0, 2, 0, 0}, /* MBWSSF_TRACKING_INTEGRAL */
+ {1, 57, 0, 0, 8, 0, 0}, /* MBWSSF_ZERO_PAD */
+ {1, 58, 0, 0, 2, 0, 0}, /* MBWSSF_MODEM_BW */
+ {1, 58, 2, 0, 1, 0, 0}, /* MBWSSF_RADIO_SELECT */
+ {1, 58, 3, 0, 1, 0, 1}, /* MBWSSF_RX_CHIRP_INVERT */
+ {1, 59, 0, 0, 4, 0, 8}, /* MBWSSF_LLR_SCALE */
+ {1, 59, 4, 0, 2, 0, 3}, /* MBWSSF_SNR_AVG_CST */
+ {1, 59, 6, 0, 1, 0, 0}, /* MBWSSF_PPM_OFFSET */
+ {1, 60, 0, 0, 4, 0, 7}, /* MBWSSF_RATE_SF */
+ {1, 60, 4, 0, 1, 0, 1}, /* MBWSSF_ONLY_CRC_EN */
+ {1, 61, 0, 0, 8, 0, 255}, /* MBWSSF_MAX_PAYLOAD_LEN */
+ {1, 62, 0, 0, 8, 1, 128}, /* TX_STATUS */
+ {1, 63, 0, 0, 3, 0, 0}, /* FSK_CH_BW_EXPO */
+ {1, 63, 3, 0, 3, 0, 0}, /* FSK_RSSI_LENGTH */
+ {1, 63, 6, 0, 1, 0, 0}, /* FSK_RX_INVERT */
+ {1, 63, 7, 0, 1, 0, 0}, /* FSK_PKT_MODE */
+ {1, 64, 0, 0, 3, 0, 0}, /* FSK_PSIZE */
+ {1, 64, 3, 0, 1, 0, 0}, /* FSK_CRC_EN */
+ {1, 64, 4, 0, 2, 0, 0}, /* FSK_DCFREE_ENC */
+ {1, 64, 6, 0, 1, 0, 0}, /* FSK_CRC_IBM */
+ {1, 65, 0, 0, 5, 0, 0}, /* FSK_ERROR_OSR_TOL */
+ {1, 65, 7, 0, 1, 0, 0}, /* FSK_RADIO_SELECT */
+ {1, 66, 0, 0, 16, 0, 0}, /* FSK_BR_RATIO */
+ {1, 68, 0, 0, 32, 0, 0}, /* FSK_REF_PATTERN_LSB */
+ {1, 72, 0, 0, 32, 0, 0}, /* FSK_REF_PATTERN_MSB */
+ {1, 76, 0, 0, 8, 0, 0}, /* FSK_PKT_LENGTH */
+ {1, 77, 0, 0, 1, 0, 1}, /* FSK_TX_GAUSSIAN_EN */
+ {1, 77, 1, 0, 2, 0, 0}, /* FSK_TX_GAUSSIAN_SELECT_BT */
+ {1, 77, 3, 0, 1, 0, 1}, /* FSK_TX_PATTERN_EN */
+ {1, 77, 4, 0, 1, 0, 0}, /* FSK_TX_PREAMBLE_SEQ */
+ {1, 77, 5, 0, 3, 0, 0}, /* FSK_TX_PSIZE */
+ {1, 80, 0, 0, 8, 0, 0}, /* FSK_NODE_ADRS */
+ {1, 81, 0, 0, 8, 0, 0}, /* FSK_BROADCAST */
+ {1, 82, 0, 0, 1, 0, 1}, /* FSK_AUTO_AFC_ON */
+ {1, 83, 0, 0, 10, 0, 0}, /* FSK_PATTERN_TIMEOUT_CFG */
+ {2, 33, 0, 0, 8, 0, 0}, /* SPI_RADIO_A__DATA */
+ {2, 34, 0, 0, 8, 1, 0}, /* SPI_RADIO_A__DATA_READBACK */
+ {2, 35, 0, 0, 8, 0, 0}, /* SPI_RADIO_A__ADDR */
+ {2, 37, 0, 0, 1, 0, 0}, /* SPI_RADIO_A__CS */
+ {2, 38, 0, 0, 8, 0, 0}, /* SPI_RADIO_B__DATA */
+ {2, 39, 0, 0, 8, 1, 0}, /* SPI_RADIO_B__DATA_READBACK */
+ {2, 40, 0, 0, 8, 0, 0}, /* SPI_RADIO_B__ADDR */
+ {2, 42, 0, 0, 1, 0, 0}, /* SPI_RADIO_B__CS */
+ {2, 43, 0, 0, 1, 0, 0}, /* RADIO_A_EN */
+ {2, 43, 1, 0, 1, 0, 0}, /* RADIO_B_EN */
+ {2, 43, 2, 0, 1, 0, 1}, /* RADIO_RST */
+ {2, 43, 3, 0, 1, 0, 0}, /* LNA_A_EN */
+ {2, 43, 4, 0, 1, 0, 0}, /* PA_A_EN */
+ {2, 43, 5, 0, 1, 0, 0}, /* LNA_B_EN */
+ {2, 43, 6, 0, 1, 0, 0}, /* PA_B_EN */
+ {2, 44, 0, 0, 2, 0, 0}, /* PA_GAIN */
+ {2, 45, 0, 0, 4, 0, 2}, /* LNA_A_CTRL_LUT */
+ {2, 45, 4, 0, 4, 0, 4}, /* PA_A_CTRL_LUT */
+ {2, 46, 0, 0, 4, 0, 2}, /* LNA_B_CTRL_LUT */
+ {2, 46, 4, 0, 4, 0, 4}, /* PA_B_CTRL_LUT */
+ {2, 47, 0, 0, 5, 0, 0}, /* CAPTURE_SOURCE */
+ {2, 47, 5, 0, 1, 0, 0}, /* CAPTURE_START */
+ {2, 47, 6, 0, 1, 0, 0}, /* CAPTURE_FORCE_TRIGGER */
+ {2, 47, 7, 0, 1, 0, 0}, /* CAPTURE_WRAP */
+ {2, 48, 0, 0, 16, 0, 0}, /* CAPTURE_PERIOD */
+ {2, 51, 0, 0, 8, 1, 0}, /* MODEM_STATUS */
+ {2, 52, 0, 0, 8, 1, 0}, /* VALID_HEADER_COUNTER_0 */
+ {2, 54, 0, 0, 8, 1, 0}, /* VALID_PACKET_COUNTER_0 */
+ {2, 56, 0, 0, 8, 1, 0}, /* VALID_HEADER_COUNTER_MBWSSF */
+ {2, 57, 0, 0, 8, 1, 0}, /* VALID_HEADER_COUNTER_FSK */
+ {2, 58, 0, 0, 8, 1, 0}, /* VALID_PACKET_COUNTER_MBWSSF */
+ {2, 59, 0, 0, 8, 1, 0}, /* VALID_PACKET_COUNTER_FSK */
+ {2, 60, 0, 0, 8, 1, 0}, /* CHANN_RSSI */
+ {2, 61, 0, 0, 8, 1, 0}, /* BB_RSSI */
+ {2, 62, 0, 0, 8, 1, 0}, /* DEC_RSSI */
+ {2, 63, 0, 0, 8, 1, 0}, /* DBG_MCU_DATA */
+ {2, 64, 0, 0, 8, 1, 0}, /* DBG_ARB_MCU_RAM_DATA */
+ {2, 65, 0, 0, 8, 1, 0}, /* DBG_AGC_MCU_RAM_DATA */
+ {2, 66, 0, 0, 16, 1, 0}, /* NEXT_PACKET_CNT */
+ {2, 68, 0, 0, 16, 1, 0}, /* ADDR_CAPTURE_COUNT */
+ {2, 70, 0, 0, 32, 1, 0}, /* TIMESTAMP */
+ {2, 74, 0, 0, 4, 1, 0}, /* DBG_CHANN0_GAIN */
+ {2, 74, 4, 0, 4, 1, 0}, /* DBG_CHANN1_GAIN */
+ {2, 75, 0, 0, 4, 1, 0}, /* DBG_CHANN2_GAIN */
+ {2, 75, 4, 0, 4, 1, 0}, /* DBG_CHANN3_GAIN */
+ {2, 76, 0, 0, 4, 1, 0}, /* DBG_CHANN4_GAIN */
+ {2, 76, 4, 0, 4, 1, 0}, /* DBG_CHANN5_GAIN */
+ {2, 77, 0, 0, 4, 1, 0}, /* DBG_CHANN6_GAIN */
+ {2, 77, 4, 0, 4, 1, 0}, /* DBG_CHANN7_GAIN */
+ {2, 78, 0, 0, 4, 1, 0}, /* DBG_DEC_FILT_GAIN */
+ {2, 79, 0, 0, 3, 1, 0}, /* SPI_DATA_FIFO_PTR */
+ {2, 79, 3, 0, 3, 1, 0}, /* PACKET_DATA_FIFO_PTR */
+ {2, 80, 0, 0, 8, 0, 0}, /* DBG_ARB_MCU_RAM_ADDR */
+ {2, 81, 0, 0, 8, 0, 0}, /* DBG_AGC_MCU_RAM_ADDR */
+ {2, 82, 0, 0, 1, 0, 0}, /* SPI_MASTER_CHIP_SELECT_POLARITY */
+ {2, 82, 1, 0, 1, 0, 0}, /* SPI_MASTER_CPOL */
+ {2, 82, 2, 0, 1, 0, 0}, /* SPI_MASTER_CPHA */
+ {2, 83, 0, 0, 1, 0, 0}, /* SIG_GEN_ANALYSER_MUX_SEL */
+ {2, 84, 0, 0, 1, 0, 0}, /* SIG_GEN_EN */
+ {2, 84, 1, 0, 1, 0, 0}, /* SIG_ANALYSER_EN */
+ {2, 84, 2, 0, 2, 0, 0}, /* SIG_ANALYSER_AVG_LEN */
+ {2, 84, 4, 0, 3, 0, 0}, /* SIG_ANALYSER_PRECISION */
+ {2, 84, 7, 0, 1, 1, 0}, /* SIG_ANALYSER_VALID_OUT */
+ {2, 85, 0, 0, 8, 0, 0}, /* SIG_GEN_FREQ */
+ {2, 86, 0, 0, 8, 0, 0}, /* SIG_ANALYSER_FREQ */
+ {2, 87, 0, 0, 8, 1, 0}, /* SIG_ANALYSER_I_OUT */
+ {2, 88, 0, 0, 8, 1, 0}, /* SIG_ANALYSER_Q_OUT */
+ {2, 89, 0, 0, 1, 0, 0}, /* GPS_EN */
+ {2, 89, 1, 0, 1, 0, 1}, /* GPS_POL */
+ {2, 90, 0, 1, 8, 0, 0}, /* SW_TEST_REG1 */
+ {2, 91, 2, 1, 6, 0, 0}, /* SW_TEST_REG2 */
+ {2, 92, 0, 1, 16, 0, 0}, /* SW_TEST_REG3 */
+ {2, 94, 0, 0, 4, 1, 0}, /* DATA_MNGT_STATUS */
+ {2, 95, 0, 0, 5, 1, 0}, /* DATA_MNGT_CPT_FRAME_ALLOCATED */
+ {2, 96, 0, 0, 5, 1, 0}, /* DATA_MNGT_CPT_FRAME_FINISHED */
+ {2, 97, 0, 0, 5, 1, 0}, /* DATA_MNGT_CPT_FRAME_READEN */
+ {1, 33, 0, 0, 8, 0, 0} /* TX_TRIG_ALL (alias) */
+};
+
+/* -------------------------------------------------------------------------- */
+/* --- PRIVATE VARIABLES ---------------------------------------------------- */
+
+static int lgw_regpage = -1; /*! keep the value of the register page selected */
+
+/* -------------------------------------------------------------------------- */
+/* --- PRIVATE FUNCTIONS ---------------------------------------------------- */
+
+int page_switch(uint8_t target) {
+ lgw_regpage = PAGE_MASK & target;
+ Sx1308.spiWrite(PAGE_ADDR, (uint8_t)lgw_regpage);
+ return LGW_REG_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+/* soft-reset function */
+int lgw_soft_reset(void) {
+ Sx1308.spiWrite(0, 0x80); /* 1 -> SOFT_RESET bit */
+ lgw_regpage = 0; /* reset the paging static variable */
+ return LGW_REG_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int reg_w_align32(void *spi_target, uint8_t spi_mux_mode, uint8_t spi_mux_target, struct lgw_reg_s r, int32_t reg_value) {
+ int i, size_byte;
+ uint8_t buf[4] = {0, 0, 0, 0};
+
+ if ((r.leng == 8) && (r.offs == 0)) {
+ /* direct write */
+ Sx1308.spiWrite(r.addr, (uint8_t)reg_value);
+ } else if ((r.offs + r.leng) <= 8) {
+ /* single-byte read-modify-write, offs:[0-7], leng:[1-7] */
+ buf[0] = Sx1308.spiRead(r.addr);
+ buf[1] = ((1 << r.leng) - 1) << r.offs; /* bit mask */
+ buf[2] = ((uint8_t)reg_value) << r.offs; /* new data offsetted */
+ buf[3] = (~buf[1] & buf[0]) | (buf[1] & buf[2]); /* mixing old & new data */
+ Sx1308.spiWrite(r.addr, (uint8_t)buf[3]);
+ } else if ((r.offs == 0) && (r.leng > 0) && (r.leng <= 32)) {
+ /* multi-byte direct write routine */
+ size_byte = (r.leng + 7) / 8; /* add a byte if it's not an exact multiple of 8 */
+ for (i = 0; i < size_byte; ++i) {
+ /* big endian register file for a file on N bytes
+ Least significant byte is stored in buf[0], most one in buf[N-1] */
+ buf[i] = (uint8_t)(0x000000FF & reg_value);
+ reg_value = (reg_value >> 8);
+ }
+ Sx1308.spiWriteBurst( r.addr, buf, size_byte);
+ } else {
+ /* register spanning multiple memory bytes but with an offset */
+
+ return LGW_REG_ERROR;
+ }
+
+ return LGW_REG_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int reg_r_align32(void *spi_target, uint8_t spi_mux_mode, uint8_t spi_mux_target, struct lgw_reg_s r, int32_t *reg_value) {
+ uint8_t bufu[4] = {0, 0, 0, 0};
+ int8_t *bufs = (int8_t *)bufu;
+ int i, size_byte;
+ uint32_t u = 0;
+
+ if ((r.offs + r.leng) <= 8) {
+ /* read one byte, then shift and mask bits to get reg value with sign extension if needed */
+ bufu[0] = Sx1308.spiRead(r.addr);
+ bufu[1] = bufu[0] << (8 - r.leng - r.offs); /* left-align the data */
+ if (r.sign == true) {
+ bufs[2] = bufs[1] >> (8 - r.leng); /* right align the data with sign extension (ARITHMETIC right shift) */
+ *reg_value = (int32_t)bufs[2]; /* signed pointer -> 32b sign extension */
+ } else {
+ bufu[2] = bufu[1] >> (8 - r.leng); /* right align the data, no sign extension */
+ *reg_value = (int32_t)bufu[2]; /* unsigned pointer -> no sign extension */
+ }
+ } else if ((r.offs == 0) && (r.leng > 0) && (r.leng <= 32)) {
+ size_byte = (r.leng + 7) / 8; /* add a byte if it's not an exact multiple of 8 */
+ Sx1308.spiReadBurst(r.addr, bufu, size_byte);
+ u = 0;
+ for (i = (size_byte - 1); i >= 0; --i) {
+ u = (uint32_t)bufu[i] + (u << 8); /* transform a 4-byte array into a 32 bit word */
+ }
+ if (r.sign == true) {
+ u = u << (32 - r.leng); /* left-align the data */
+ *reg_value = (int32_t)u >> (32 - r.leng); /* right-align the data with sign extension (ARITHMETIC right shift) */
+ } else {
+ *reg_value = (int32_t)u; /* unsigned value -> return 'as is' */
+ }
+ } else {
+ /* register spanning multiple memory bytes but with an offset */
+ return LGW_REG_ERROR;
+ }
+
+ return LGW_REG_SUCCESS;
+}
+
+/* -------------------------------------------------------------------------- */
+/* --- PUBLIC FUNCTIONS DEFINITION ------------------------------------------ */
+
+int lgw_connect(void) {
+ Sx1308.init();
+ Sx1308.spiWrite(LGW_PAGE_REG, 0);
+
+ return LGW_REG_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_reg_w(uint16_t register_id, int32_t reg_value) {
+ struct lgw_reg_s r;
+
+ /* check input parameters */
+ if (register_id >= LGW_TOTALREGS) {
+ return LGW_REG_ERROR;
+ }
+
+ /* intercept direct access to PAGE_REG & SOFT_RESET */
+ if (register_id == LGW_PAGE_REG) {
+ page_switch(reg_value);
+ return LGW_REG_SUCCESS;
+ } else if (register_id == LGW_SOFT_RESET) {
+ /* only reset if lsb is 1 */
+ if ((reg_value & 0x01) != 0) {
+ return LGW_REG_SUCCESS;
+ }
+ }
+
+ /* get register struct from the struct array */
+ r = loregs[register_id];
+
+ /* reject write to read-only registers */
+ if (r.rdon == 1) {
+
+ return LGW_REG_ERROR;
+ }
+
+ /* select proper register page if needed */
+ if ((r.page != -1)) {
+ page_switch(r.page);
+ }
+
+ reg_w_align32(0, 0, 0, r, reg_value);
+
+ return LGW_REG_SUCCESS;
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_reg_r(uint16_t register_id, int32_t *reg_value) {
+ struct lgw_reg_s r;
+
+ /* get register struct from the struct array */
+ r = loregs[register_id];
+
+ /* select proper register page if needed */
+ if ((r.page != -1)) { // && (r.page != lgw_regpage)) {
+ page_switch(r.page);
+ }
+
+ reg_r_align32(0, 0, 0, r, reg_value);
+
+ return LGW_REG_SUCCESS;
+
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_reg_wb(uint16_t register_id, uint8_t *data, uint16_t size) {
+ struct lgw_reg_s r;
+
+ /* check input parameters */
+ if (size == 0) {
+
+ return LGW_REG_ERROR;
+ }
+ if (register_id >= LGW_TOTALREGS) {
+
+ return LGW_REG_ERROR;
+ }
+
+ /* get register struct from the struct array */
+ r = loregs[register_id];
+
+ /* reject write to read-only registers */
+ if (r.rdon == 1) {
+
+ return LGW_REG_ERROR;
+ }
+
+ /* select proper register page if needed */
+ if ((r.page != -1)) {
+ page_switch(r.page);
+ }
+
+ /* do the burst write */
+ Sx1308.spiWriteBurst(r.addr, data, size);
+
+ return LGW_REG_SUCCESS;
+
+}
+
+/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+
+int lgw_reg_rb(uint16_t register_id, uint8_t *data, uint16_t size) {
+ struct lgw_reg_s r;
+
+ /* check input parameters */
+ if (size == 0) {
+
+ return LGW_REG_ERROR;
+ }
+ if (register_id >= LGW_TOTALREGS) {
+
+ return LGW_REG_ERROR;
+ }
+
+ /* get register struct from the struct array */
+ r = loregs[register_id];
+
+ /* select proper register page if needed */
+ if ((r.page != -1)) {
+ page_switch(r.page);
+ }
+
+ /* do the burst read */
+ Sx1308.spiReadBurst(r.addr, data, size);
+
+ return LGW_REG_SUCCESS;
+}
diff -r 000000000000 -r c76361bd82e8 src/SX1308HAL/src/sx1308.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/SX1308HAL/src/sx1308.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,198 @@
+/*
+ / _____) _ | |
+( (____ _____ ____ _| |_ _____ ____| |__
+ \____ \| ___ | (_ _) ___ |/ ___) _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+ (C)2017 Semtech
+*/
+
+#include "SX1308.h"
+#include "mbed.h"
+#include "board.h"
+#include "loragw_hal.h"
+
+#define DELAYSPI 1
+
+SX1308::SX1308(PinName slaveSelectPin, PinName mosi, PinName miso, PinName sclk, PinName GPIO0, PinName Reset)
+ : _slaveSelectPin(slaveSelectPin), _spi(mosi, miso, sclk), _interrupt(GPIO0), _reset(Reset) {
+
+}
+
+bool SX1308::init() {
+#ifdef V2
+ FEM_EN = 1;
+#endif
+ HSCLKEN = 1;
+
+ dig_reset();
+
+ _slaveSelectPin = 1;
+ wait_ms(10);
+ _spi.format(8, 0);
+ _spi.frequency(8000000);
+
+ _interrupt.fall(this, &SX1308::isr0);
+
+ firsttx = true;
+ txongoing = 0;
+ offtmstpstm32 = 0;
+ timerstm32ref.reset();
+ timerstm32ref.start();
+
+ return true;
+}
+
+void SX1308::dig_reset() { //init modem for s2lp
+ _reset = 1;
+ wait_us(10);
+ _reset = 0;
+ wait_us(10);
+}
+
+void SX1308::isr0() {
+ __disable_irq();
+ if (txongoing == 1) {
+ waittxend = 0;
+ }
+ __enable_irq();
+}
+
+void SX1308::spiWrite(uint8_t reg, uint8_t val) {
+ __disable_irq(); // Disable Interrupts
+ _slaveSelectPin = 0;
+ wait_us(DELAYSPI);
+ _spi.write(0x80 | (reg & 0x7F));
+ _spi.write(val);
+ wait_us(DELAYSPI);
+ _slaveSelectPin = 1;
+ __enable_irq(); // Enable Interrupts
+}
+
+void SX1308::spiWriteBurstF(uint8_t reg, uint8_t * val, int size) {
+ int i = 0;
+
+ __disable_irq(); // Disable Interrupts
+ _slaveSelectPin = 0;
+ wait_us(DELAYSPI);
+ _spi.write(0x80 | (reg & 0x7F));
+ for (i = 0; i < size; i++) {
+ _spi.write(val[i]);
+ }
+ __enable_irq(); // Enable Interrupts
+}
+
+void SX1308::spiWriteBurstM(uint8_t reg, uint8_t * val, int size) {
+ int i = 0;
+
+ __disable_irq(); // Disable Interrupts
+ for (i = 0; i < size; i++) {
+ _spi.write(val[i]);
+ }
+ __enable_irq(); // Enable Interrupts
+}
+
+void SX1308::spiWriteBurstE(uint8_t reg, uint8_t * val, int size) {
+ int i = 0;
+
+ __disable_irq(); // Disable Interrupts
+ for (i = 0; i < size; i++) {
+ _spi.write(val[i]);
+ }
+ wait_us(DELAYSPI);
+ _slaveSelectPin = 1;
+ __enable_irq(); // Enable Interrupts
+}
+
+void SX1308::spiWriteBurst(uint8_t reg, uint8_t * val, int size) {
+ int i = 0;
+
+ __disable_irq(); // Disable Interrupts
+ _slaveSelectPin = 0;
+ wait_us(DELAYSPI);
+ _spi.write(0x80 | (reg & 0x7F));
+ for (i = 0; i < size; i++) {
+ _spi.write(val[i]);
+ }
+ wait_us(DELAYSPI);
+ _slaveSelectPin = 1;
+ __enable_irq(); // Enable Interrupts
+}
+
+uint8_t SX1308::spiRead(uint8_t reg) {
+ uint8_t val = 0;
+
+ __disable_irq(); // Disable Interrupts
+ _slaveSelectPin = 0;
+ wait_us(DELAYSPI);
+ _spi.write(reg & 0x7F); // The written value is ignored, reg value is read
+ val = _spi.write(0);
+ wait_us(DELAYSPI);
+ _slaveSelectPin = 1;
+ __enable_irq(); // Enable Interrupts
+
+ return val;
+}
+
+uint8_t SX1308::spiReadBurstF(uint8_t reg, uint8_t *data, int size) {
+ int i;
+ uint8_t val = 0;
+
+ __disable_irq(); // Disable Interrupts
+ _slaveSelectPin = 0;
+ wait_us(DELAYSPI);
+ _spi.write(reg & 0x7F); // The written value is ignored, reg value is read
+ for (i = 0; i < size; i++) {
+ data[i] = _spi.write(0);
+ }
+ __enable_irq(); // Enable Interrupts
+
+ return val;
+}
+
+uint8_t SX1308::spiReadBurstM(uint8_t reg, uint8_t *data, int size) {
+ int i;
+ uint8_t val = 0;
+
+ __disable_irq(); // Disable Interrupts
+ // The written value is ignored, reg value is read
+ for (i = 0; i < size; i++) {
+ data[i] = _spi.write(0);
+ }
+ __enable_irq(); // Enable Interrupts
+
+ return val;
+}
+
+uint8_t SX1308::spiReadBurstE(uint8_t reg, uint8_t *data, int size) {
+ int i;
+ uint8_t val = 0;
+
+ __disable_irq(); // Disable Interrupts
+ for (i = 0; i < size; i++) {
+ data[i] = _spi.write(0);
+ }
+ wait_us(DELAYSPI);
+ _slaveSelectPin = 1;
+ __enable_irq(); // Enable Interrupts
+
+ return val;
+}
+
+uint8_t SX1308::spiReadBurst(uint8_t reg, uint8_t *data, int size) {
+ int i;
+ uint8_t val = 0;
+
+ __disable_irq(); // Disable Interrupts
+ _slaveSelectPin = 0;
+ wait_us(10);
+ _spi.write(reg & 0x7F);
+ for (i = 0; i < size; i++) {
+ data[i] = _spi.write(0);
+ }
+ wait_us(DELAYSPI);
+ _slaveSelectPin = 1;
+ __enable_irq(); // Enable Interrupts
+
+ return val;
+}
diff -r 000000000000 -r c76361bd82e8 src/buildstartup_stm32f401xe.lst --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/buildstartup_stm32f401xe.lst Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,1726 @@ + + + +ARM Macro Assembler Page 1 + + + 1 00000000 #line 1 "mbed-dev/targets/cmsis/TARGET_ +STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.S +" + 1 00000000 ;******************** (C) COPYRIGHT 2014 STMicroelectron + ics ******************** + 2 00000000 ;* File Name : startup_stm32f401xe.s + 3 00000000 ;* Author : MCD Application Team + 4 00000000 ;* Version : V2.1.0 + 5 00000000 ;* Date : 19-June-2014 + 6 00000000 ;* Description : STM32F401xe devices vector table + for MDK-ARM_STD toolchain. + 7 00000000 ;* This module performs: + 8 00000000 ;* - Set the initial SP + 9 00000000 ;* - Set the initial PC == Reset_Ha + ndler + 10 00000000 ;* - Set the vector table entries w + ith the exceptions ISR address + 11 00000000 ;* - Branches to __main in the C li + brary (which eventually + 12 00000000 ;* calls main()). + 13 00000000 ;* After Reset the CortexM4 process + or is in Thread mode, + 14 00000000 ;* priority is Privileged, and the + Stack is set to Main. + 15 00000000 ;* <<< Use Configuration Wizard in Context Menu >>> + 16 00000000 ;******************************************************* + ************************ + 17 00000000 ; + 18 00000000 ;* Redistribution and use in source and binary forms, wi + th or without modification, + 19 00000000 ;* are permitted provided that the following conditions + are met: + 20 00000000 ;* 1. Redistributions of source code must retain the a + bove copyright notice, + 21 00000000 ;* this list of conditions and the following discla + imer. + 22 00000000 ;* 2. Redistributions in binary form must reproduce th + e above copyright notice, + 23 00000000 ;* this list of conditions and the following discla + imer in the documentation + 24 00000000 ;* and/or other materials provided with the distrib + ution. + 25 00000000 ;* 3. Neither the name of STMicroelectronics nor the n + ames of its contributors + 26 00000000 ;* may be used to endorse or promote products deriv + ed from this software + 27 00000000 ;* without specific prior written permission. + 28 00000000 ;* + 29 00000000 ;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AN + D CONTRIBUTORS "AS IS" + 30 00000000 ;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT + NOT LIMITED TO, THE + 31 00000000 ;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE + 32 00000000 ;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR + CONTRIBUTORS BE LIABLE + 33 00000000 ;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPL + ARY, OR CONSEQUENTIAL + 34 00000000 ;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT O + + + +ARM Macro Assembler Page 2 + + + F SUBSTITUTE GOODS OR + 35 00000000 ;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER + 36 00000000 ;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON + TRACT, STRICT LIABILITY, + 37 00000000 ;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING I + N ANY WAY OUT OF THE USE + 38 00000000 ;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + OF SUCH DAMAGE. + 39 00000000 ; + 40 00000000 ;******************************************************* + ************************ + 41 00000000 + 42 00000000 + 43 00000000 20018000 + __initial_sp + EQU 0x20018000 ; Top of RAM + 44 00000000 + 45 00000000 PRESERVE8 + 46 00000000 THUMB + 47 00000000 + 48 00000000 + 49 00000000 ; Vector Table Mapped to Address 0 at Reset + 50 00000000 AREA RESET, DATA, READONLY + 51 00000000 EXPORT __Vectors + 52 00000000 EXPORT __Vectors_End + 53 00000000 EXPORT __Vectors_Size + 54 00000000 + 55 00000000 20018000 + __Vectors + DCD __initial_sp ; Top of Stack + 56 00000004 00000000 DCD Reset_Handler ; Reset Handler + 57 00000008 00000000 DCD NMI_Handler ; NMI Handler + 58 0000000C 00000000 DCD HardFault_Handler ; Hard Fault + Handler + 59 00000010 00000000 DCD MemManage_Handler + ; MPU Fault Handler + + 60 00000014 00000000 DCD BusFault_Handler + ; Bus Fault Handler + + 61 00000018 00000000 DCD UsageFault_Handler ; Usage Faul + t Handler + 62 0000001C 00000000 DCD 0 ; Reserved + 63 00000020 00000000 DCD 0 ; Reserved + 64 00000024 00000000 DCD 0 ; Reserved + 65 00000028 00000000 DCD 0 ; Reserved + 66 0000002C 00000000 DCD SVC_Handler ; SVCall Handler + 67 00000030 00000000 DCD DebugMon_Handler ; Debug Monito + r Handler + 68 00000034 00000000 DCD 0 ; Reserved + 69 00000038 00000000 DCD PendSV_Handler ; PendSV Handler + + 70 0000003C 00000000 DCD SysTick_Handler + ; SysTick Handler + 71 00000040 + 72 00000040 ; External Interrupts + 73 00000040 00000000 DCD WWDG_IRQHandler ; Window WatchD + og + + + +ARM Macro Assembler Page 3 + + + + + 74 00000044 00000000 DCD PVD_IRQHandler ; PVD through EX + TI Line detection + + + 75 00000048 00000000 DCD TAMP_STAMP_IRQHandler ; Tamper + and TimeStamps thro + ugh the EXTI line + + 76 0000004C 00000000 DCD RTC_WKUP_IRQHandler ; RTC Wakeu + p through the EXTI + line + + 77 00000050 00000000 DCD FLASH_IRQHandler ; FLASH + + + 78 00000054 00000000 DCD RCC_IRQHandler ; RCC + + + 79 00000058 00000000 DCD EXTI0_IRQHandler ; EXTI Line0 + + + + 80 0000005C 00000000 DCD EXTI1_IRQHandler ; EXTI Line1 + + + + 81 00000060 00000000 DCD EXTI2_IRQHandler ; EXTI Line2 + + + + 82 00000064 00000000 DCD EXTI3_IRQHandler ; EXTI Line3 + + + + 83 00000068 00000000 DCD EXTI4_IRQHandler ; EXTI Line4 + + + + 84 0000006C 00000000 DCD DMA1_Stream0_IRQHandler ; DMA1 + Stream 0 + + + 85 00000070 00000000 DCD DMA1_Stream1_IRQHandler ; DMA1 + Stream 1 + + + 86 00000074 00000000 DCD DMA1_Stream2_IRQHandler ; DMA1 + Stream 2 + + + 87 00000078 00000000 DCD DMA1_Stream3_IRQHandler ; DMA1 + Stream 3 + + + 88 0000007C 00000000 DCD DMA1_Stream4_IRQHandler ; DMA1 + Stream 4 + + + + +ARM Macro Assembler Page 4 + + + + 89 00000080 00000000 DCD DMA1_Stream5_IRQHandler ; DMA1 + Stream 5 + + + 90 00000084 00000000 DCD DMA1_Stream6_IRQHandler ; DMA1 + Stream 6 + + + 91 00000088 00000000 DCD ADC_IRQHandler ; ADC1, ADC2 and + ADC3s + + 92 0000008C 00000000 DCD 0 ; Reserved + + + + 93 00000090 00000000 DCD 0 ; Reserved + + + + 94 00000094 00000000 DCD 0 ; Reserved + + + 95 00000098 00000000 DCD 0 ; Reserved + + + + 96 0000009C 00000000 DCD EXTI9_5_IRQHandler ; External L + ine[9:5]s + + + 97 000000A0 00000000 DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 + Break and TIM9 + + 98 000000A4 00000000 DCD TIM1_UP_TIM10_IRQHandler ; TIM1 + Update and TIM10 + + 99 000000A8 00000000 DCD TIM1_TRG_COM_TIM11_IRQHandler ; + TIM1 Trigger and C + ommutation and TIM1 + 1 + 100 000000AC 00000000 DCD TIM1_CC_IRQHandler ; TIM1 Captu + re Compare + + + 101 000000B0 00000000 DCD TIM2_IRQHandler ; TIM2 + + + 102 000000B4 00000000 DCD TIM3_IRQHandler ; TIM3 + + + 103 000000B8 00000000 DCD TIM4_IRQHandler ; TIM4 + + + 104 000000BC 00000000 DCD I2C1_EV_IRQHandler ; I2C1 Event + + + + 105 000000C0 00000000 DCD I2C1_ER_IRQHandler ; I2C1 Error + + + +ARM Macro Assembler Page 5 + + + + + + 106 000000C4 00000000 DCD I2C2_EV_IRQHandler ; I2C2 Event + + + + 107 000000C8 00000000 DCD I2C2_ER_IRQHandler ; I2C2 Error + + + + 108 000000CC 00000000 DCD SPI1_IRQHandler ; SPI1 + + + 109 000000D0 00000000 DCD SPI2_IRQHandler ; SPI2 + + + 110 000000D4 00000000 DCD USART1_IRQHandler ; USART1 + + + 111 000000D8 00000000 DCD USART2_IRQHandler ; USART2 + + + 112 000000DC 00000000 DCD 0 ; Reserved + + + 113 000000E0 00000000 DCD EXTI15_10_IRQHandler ; External + Line[15:10]s + + + 114 000000E4 00000000 DCD RTC_Alarm_IRQHandler ; RTC Alar + m (A and B) through + EXTI Line + + 115 000000E8 00000000 DCD OTG_FS_WKUP_IRQHandler ; USB OT + G FS Wakeup through + EXTI line + + 116 000000EC 00000000 DCD 0 ; Reserved + + 117 000000F0 00000000 DCD 0 ; Reserved + + 118 000000F4 00000000 DCD 0 ; Reserved + 119 000000F8 00000000 DCD 0 ; Reserved + + + 120 000000FC 00000000 DCD DMA1_Stream7_IRQHandler ; DMA1 + Stream7 + + + 121 00000100 00000000 DCD 0 ; Reserved + + + 122 00000104 00000000 DCD SDIO_IRQHandler ; SDIO + + + 123 00000108 00000000 DCD TIM5_IRQHandler ; TIM5 + + + + + +ARM Macro Assembler Page 6 + + + 124 0000010C 00000000 DCD SPI3_IRQHandler ; SPI3 + + + 125 00000110 00000000 DCD 0 ; Reserved + + + 126 00000114 00000000 DCD 0 ; Reserved + + + 127 00000118 00000000 DCD 0 ; Reserved + + 128 0000011C 00000000 DCD 0 ; Reserved + + 129 00000120 00000000 DCD DMA2_Stream0_IRQHandler ; DMA2 + Stream 0 + + + 130 00000124 00000000 DCD DMA2_Stream1_IRQHandler ; DMA2 + Stream 1 + + + 131 00000128 00000000 DCD DMA2_Stream2_IRQHandler ; DMA2 + Stream 2 + + + 132 0000012C 00000000 DCD DMA2_Stream3_IRQHandler ; DMA2 + Stream 3 + + + 133 00000130 00000000 DCD DMA2_Stream4_IRQHandler + ; DMA2 Stream 4 + 134 00000134 00000000 DCD 0 ; Reserved + 135 00000138 00000000 DCD 0 ; Reserved + 136 0000013C 00000000 DCD 0 ; Reserved + + + 137 00000140 00000000 DCD 0 ; Reserved + + + + 138 00000144 00000000 DCD 0 ; Reserved + + + + 139 00000148 00000000 DCD 0 ; Reserved + + + + 140 0000014C 00000000 DCD OTG_FS_IRQHandler ; USB OTG FS + + + 141 00000150 00000000 DCD DMA2_Stream5_IRQHandler ; DMA2 + Stream 5 + + + 142 00000154 00000000 DCD DMA2_Stream6_IRQHandler ; DMA2 + Stream 6 + + + + + +ARM Macro Assembler Page 7 + + + 143 00000158 00000000 DCD DMA2_Stream7_IRQHandler ; DMA2 + Stream 7 + + + 144 0000015C 00000000 DCD USART6_IRQHandler ; USART6 + + + + 145 00000160 00000000 DCD I2C3_EV_IRQHandler ; I2C3 event + + + + 146 00000164 00000000 DCD I2C3_ER_IRQHandler ; I2C3 error + + + + 147 00000168 00000000 DCD 0 ; Reserved + + 148 0000016C 00000000 DCD 0 ; Reserved + + 149 00000170 00000000 DCD 0 ; Reserved + + 150 00000174 00000000 DCD 0 ; Reserved + + + 151 00000178 00000000 DCD 0 ; Reserved + 152 0000017C 00000000 DCD 0 ; Reserved + + + 153 00000180 00000000 DCD 0 ; Reserved + 154 00000184 00000000 DCD FPU_IRQHandler ; FPU + 155 00000188 00000000 DCD 0 ; Reserved + 156 0000018C 00000000 DCD 0 ; Reserved + 157 00000190 00000000 DCD SPI4_IRQHandler ; SPI4 + 158 00000194 + 159 00000194 __Vectors_End + 160 00000194 + 161 00000194 00000194 + __Vectors_Size + EQU __Vectors_End - __Vectors + 162 00000194 + 163 00000194 AREA |.text|, CODE, READONLY + 164 00000000 + 165 00000000 ; Reset handler + 166 00000000 Reset_Handler + PROC + 167 00000000 EXPORT Reset_Handler [WEAK +] + 168 00000000 IMPORT SystemInit + 169 00000000 IMPORT __main + 170 00000000 + 171 00000000 4806 LDR R0, =SystemInit + 172 00000002 4780 BLX R0 + 173 00000004 4806 LDR R0, =__main + 174 00000006 4700 BX R0 + 175 00000008 ENDP + 176 00000008 + 177 00000008 ; Dummy Exception Handlers (infinite loops which can be + modified) + + + +ARM Macro Assembler Page 8 + + + 178 00000008 + 179 00000008 NMI_Handler + PROC + 180 00000008 EXPORT NMI_Handler [WEA +K] + 181 00000008 E7FE B . + 182 0000000A ENDP + 183 0000000A HardFault_Handler + PROC + 184 0000000A + 185 0000000A EXPORT HardFault_Handler [WEA +K] + 186 0000000A E7FE B . + 187 0000000C ENDP + 188 0000000C MemManage_Handler + PROC + 189 0000000C + 190 0000000C EXPORT MemManage_Handler [WEA +K] + 191 0000000C E7FE B . + 192 0000000E ENDP + 193 0000000E BusFault_Handler + PROC + 194 0000000E + 195 0000000E EXPORT BusFault_Handler [WEA +K] + 196 0000000E E7FE B . + 197 00000010 ENDP + 198 00000010 UsageFault_Handler + PROC + 199 00000010 + 200 00000010 EXPORT UsageFault_Handler [WEA +K] + 201 00000010 E7FE B . + 202 00000012 ENDP + 203 00000012 SVC_Handler + PROC + 204 00000012 EXPORT SVC_Handler [WEA +K] + 205 00000012 E7FE B . + 206 00000014 ENDP + 207 00000014 DebugMon_Handler + PROC + 208 00000014 + 209 00000014 EXPORT DebugMon_Handler [WEA +K] + 210 00000014 E7FE B . + 211 00000016 ENDP + 212 00000016 PendSV_Handler + PROC + 213 00000016 EXPORT PendSV_Handler [WEA +K] + 214 00000016 E7FE B . + 215 00000018 ENDP + 216 00000018 SysTick_Handler + PROC + 217 00000018 EXPORT SysTick_Handler [WEA +K] + 218 00000018 E7FE B . + + + +ARM Macro Assembler Page 9 + + + 219 0000001A ENDP + 220 0000001A + 221 0000001A Default_Handler + PROC + 222 0000001A + 223 0000001A EXPORT WWDG_IRQHandler + [WEAK] + 224 0000001A EXPORT PVD_IRQHandler + [WEAK] + 225 0000001A EXPORT TAMP_STAMP_IRQHandler + [WEAK] + 226 0000001A EXPORT RTC_WKUP_IRQHandler + [WEAK] + 227 0000001A EXPORT FLASH_IRQHandler + [WEAK] + 228 0000001A EXPORT RCC_IRQHandler + [WEAK] + 229 0000001A EXPORT EXTI0_IRQHandler + [WEAK] + 230 0000001A EXPORT EXTI1_IRQHandler + [WEAK] + 231 0000001A EXPORT EXTI2_IRQHandler + [WEAK] + 232 0000001A EXPORT EXTI3_IRQHandler + [WEAK] + 233 0000001A EXPORT EXTI4_IRQHandler + [WEAK] + 234 0000001A EXPORT DMA1_Stream0_IRQHandler + [WEAK] + 235 0000001A EXPORT DMA1_Stream1_IRQHandler + [WEAK] + 236 0000001A EXPORT DMA1_Stream2_IRQHandler + [WEAK] + 237 0000001A EXPORT DMA1_Stream3_IRQHandler + [WEAK] + 238 0000001A EXPORT DMA1_Stream4_IRQHandler + [WEAK] + 239 0000001A EXPORT DMA1_Stream5_IRQHandler + [WEAK] + 240 0000001A EXPORT DMA1_Stream6_IRQHandler + [WEAK] + 241 0000001A EXPORT ADC_IRQHandler + [WEAK] + 242 0000001A EXPORT EXTI9_5_IRQHandler + [WEAK] + 243 0000001A EXPORT TIM1_BRK_TIM9_IRQHandler + [WEAK] + 244 0000001A EXPORT TIM1_UP_TIM10_IRQHandler + [WEAK] + 245 0000001A EXPORT TIM1_TRG_COM_TIM11_IRQHandler + [WEAK] + 246 0000001A EXPORT TIM1_CC_IRQHandler + [WEAK] + 247 0000001A EXPORT TIM2_IRQHandler + [WEAK] + 248 0000001A EXPORT TIM3_IRQHandler + [WEAK] + 249 0000001A EXPORT TIM4_IRQHandler + [WEAK] + + + +ARM Macro Assembler Page 10 + + + 250 0000001A EXPORT I2C1_EV_IRQHandler + [WEAK] + 251 0000001A EXPORT I2C1_ER_IRQHandler + [WEAK] + 252 0000001A EXPORT I2C2_EV_IRQHandler + [WEAK] + 253 0000001A EXPORT I2C2_ER_IRQHandler + [WEAK] + 254 0000001A EXPORT SPI1_IRQHandler + [WEAK] + 255 0000001A EXPORT SPI2_IRQHandler + [WEAK] + 256 0000001A EXPORT USART1_IRQHandler + [WEAK] + 257 0000001A EXPORT USART2_IRQHandler + [WEAK] + 258 0000001A EXPORT EXTI15_10_IRQHandler + [WEAK] + 259 0000001A EXPORT RTC_Alarm_IRQHandler + [WEAK] + 260 0000001A EXPORT OTG_FS_WKUP_IRQHandler + [WEAK] + 261 0000001A EXPORT DMA1_Stream7_IRQHandler + [WEAK] + 262 0000001A EXPORT SDIO_IRQHandler + [WEAK] + 263 0000001A EXPORT TIM5_IRQHandler + [WEAK] + 264 0000001A EXPORT SPI3_IRQHandler + [WEAK] + 265 0000001A EXPORT DMA2_Stream0_IRQHandler + [WEAK] + 266 0000001A EXPORT DMA2_Stream1_IRQHandler + [WEAK] + 267 0000001A EXPORT DMA2_Stream2_IRQHandler + [WEAK] + 268 0000001A EXPORT DMA2_Stream3_IRQHandler + [WEAK] + 269 0000001A EXPORT DMA2_Stream4_IRQHandler + [WEAK] + 270 0000001A EXPORT OTG_FS_IRQHandler + [WEAK] + 271 0000001A EXPORT DMA2_Stream5_IRQHandler + [WEAK] + 272 0000001A EXPORT DMA2_Stream6_IRQHandler + [WEAK] + 273 0000001A EXPORT DMA2_Stream7_IRQHandler + [WEAK] + 274 0000001A EXPORT USART6_IRQHandler + [WEAK] + 275 0000001A EXPORT I2C3_EV_IRQHandler + [WEAK] + 276 0000001A EXPORT I2C3_ER_IRQHandler + [WEAK] + 277 0000001A EXPORT FPU_IRQHandler + [WEAK] + 278 0000001A EXPORT SPI4_IRQHandler + [WEAK] + 279 0000001A + + + +ARM Macro Assembler Page 11 + + + 280 0000001A WWDG_IRQHandler + 281 0000001A PVD_IRQHandler + 282 0000001A TAMP_STAMP_IRQHandler + 283 0000001A RTC_WKUP_IRQHandler + 284 0000001A FLASH_IRQHandler + 285 0000001A RCC_IRQHandler + 286 0000001A EXTI0_IRQHandler + 287 0000001A EXTI1_IRQHandler + 288 0000001A EXTI2_IRQHandler + 289 0000001A EXTI3_IRQHandler + 290 0000001A EXTI4_IRQHandler + 291 0000001A DMA1_Stream0_IRQHandler + 292 0000001A DMA1_Stream1_IRQHandler + 293 0000001A DMA1_Stream2_IRQHandler + 294 0000001A DMA1_Stream3_IRQHandler + 295 0000001A DMA1_Stream4_IRQHandler + 296 0000001A DMA1_Stream5_IRQHandler + 297 0000001A DMA1_Stream6_IRQHandler + 298 0000001A ADC_IRQHandler + 299 0000001A EXTI9_5_IRQHandler + 300 0000001A TIM1_BRK_TIM9_IRQHandler + 301 0000001A TIM1_UP_TIM10_IRQHandler + 302 0000001A TIM1_TRG_COM_TIM11_IRQHandler + 303 0000001A TIM1_CC_IRQHandler + 304 0000001A TIM2_IRQHandler + 305 0000001A TIM3_IRQHandler + 306 0000001A TIM4_IRQHandler + 307 0000001A I2C1_EV_IRQHandler + 308 0000001A I2C1_ER_IRQHandler + 309 0000001A I2C2_EV_IRQHandler + 310 0000001A I2C2_ER_IRQHandler + 311 0000001A SPI1_IRQHandler + 312 0000001A SPI2_IRQHandler + 313 0000001A USART1_IRQHandler + 314 0000001A USART2_IRQHandler + 315 0000001A EXTI15_10_IRQHandler + 316 0000001A RTC_Alarm_IRQHandler + 317 0000001A OTG_FS_WKUP_IRQHandler + 318 0000001A DMA1_Stream7_IRQHandler + 319 0000001A SDIO_IRQHandler + 320 0000001A TIM5_IRQHandler + 321 0000001A SPI3_IRQHandler + 322 0000001A DMA2_Stream0_IRQHandler + 323 0000001A DMA2_Stream1_IRQHandler + 324 0000001A DMA2_Stream2_IRQHandler + 325 0000001A DMA2_Stream3_IRQHandler + 326 0000001A DMA2_Stream4_IRQHandler + 327 0000001A OTG_FS_IRQHandler + 328 0000001A DMA2_Stream5_IRQHandler + 329 0000001A DMA2_Stream6_IRQHandler + 330 0000001A DMA2_Stream7_IRQHandler + 331 0000001A USART6_IRQHandler + 332 0000001A I2C3_EV_IRQHandler + 333 0000001A I2C3_ER_IRQHandler + 334 0000001A FPU_IRQHandler + 335 0000001A SPI4_IRQHandler + 336 0000001A + 337 0000001A E7FE B . + 338 0000001C + + + +ARM Macro Assembler Page 12 + + + 339 0000001C ENDP + 340 0000001C + 341 0000001C ALIGN + 342 0000001C END + 00000000 + 00000000 +Command Line: --debug --xref --cpreproc --diag_suppress=9931 --cpu=Cortex-M4.fp + --apcs=interwork --depend=.\build\uvision5\startup_stm32f401xe.d -o.\build\uvi +sion5\startup_stm32f401xe.o -IC:\STM32\mbed_blinky2_copy\RTE -IC:\Keil_v5\ARM\P +ACK\Keil\STM32F4xx_DFP\2.10.0\Drivers\CMSIS\Device\ST\STM32F4xx\Include -IC:\Ke +il_v5\ARM\CMSIS\Include --predefine="__EVAL SETA 1" --predefine="__UVISION_VERS +ION SETA 521" --predefine="STM32F401xE SETA 1" --cpreproc_opts=-D__ASSERT_MSG,- +D__CMSIS_RTOS,-DARM_MATH_CM4,-D__CORTEX_M4,-D__MBED_CMSIS_RTOS_CM,-D__FPU_PRESE +NT=1 --list=.\buildstartup_stm32f401xe.lst mbed-dev/targets/cmsis/TARGET_STM/TA +RGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.S + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +RESET 00000000 + +Symbol: RESET + Definitions + At line 50 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + None +Comment: RESET unused +__Vectors 00000000 + +Symbol: __Vectors + Definitions + At line 55 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 51 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 161 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +__Vectors_End 00000194 + +Symbol: __Vectors_End + Definitions + At line 159 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 52 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 161 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +.text 00000000 + +Symbol: .text + Definitions + At line 163 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + None +Comment: .text unused +ADC_IRQHandler 0000001A + +Symbol: ADC_IRQHandler + Definitions + At line 298 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 91 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 241 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +BusFault_Handler 0000000E + +Symbol: BusFault_Handler + Definitions + At line 193 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 60 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 195 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA1_Stream0_IRQHandler 0000001A + +Symbol: DMA1_Stream0_IRQHandler + Definitions + At line 291 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 84 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 234 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA1_Stream1_IRQHandler 0000001A + +Symbol: DMA1_Stream1_IRQHandler + Definitions + At line 292 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 85 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 235 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA1_Stream2_IRQHandler 0000001A + + + + +ARM Macro Assembler Page 2 Alphabetic symbol ordering +Relocatable symbols + +Symbol: DMA1_Stream2_IRQHandler + Definitions + At line 293 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 86 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 236 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA1_Stream3_IRQHandler 0000001A + +Symbol: DMA1_Stream3_IRQHandler + Definitions + At line 294 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 87 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 237 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA1_Stream4_IRQHandler 0000001A + +Symbol: DMA1_Stream4_IRQHandler + Definitions + At line 295 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 88 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 238 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA1_Stream5_IRQHandler 0000001A + +Symbol: DMA1_Stream5_IRQHandler + Definitions + At line 296 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 89 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 239 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA1_Stream6_IRQHandler 0000001A + +Symbol: DMA1_Stream6_IRQHandler + Definitions + At line 297 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 90 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 240 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA1_Stream7_IRQHandler 0000001A + + + +ARM Macro Assembler Page 3 Alphabetic symbol ordering +Relocatable symbols + + +Symbol: DMA1_Stream7_IRQHandler + Definitions + At line 318 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 120 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 261 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA2_Stream0_IRQHandler 0000001A + +Symbol: DMA2_Stream0_IRQHandler + Definitions + At line 322 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 129 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 265 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA2_Stream1_IRQHandler 0000001A + +Symbol: DMA2_Stream1_IRQHandler + Definitions + At line 323 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 130 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 266 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA2_Stream2_IRQHandler 0000001A + +Symbol: DMA2_Stream2_IRQHandler + Definitions + At line 324 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 131 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 267 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA2_Stream3_IRQHandler 0000001A + +Symbol: DMA2_Stream3_IRQHandler + Definitions + At line 325 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 132 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 268 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + + + + +ARM Macro Assembler Page 4 Alphabetic symbol ordering +Relocatable symbols + +DMA2_Stream4_IRQHandler 0000001A + +Symbol: DMA2_Stream4_IRQHandler + Definitions + At line 326 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 133 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 269 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA2_Stream5_IRQHandler 0000001A + +Symbol: DMA2_Stream5_IRQHandler + Definitions + At line 328 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 141 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 271 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA2_Stream6_IRQHandler 0000001A + +Symbol: DMA2_Stream6_IRQHandler + Definitions + At line 329 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 142 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 272 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DMA2_Stream7_IRQHandler 0000001A + +Symbol: DMA2_Stream7_IRQHandler + Definitions + At line 330 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 143 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 273 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +DebugMon_Handler 00000014 + +Symbol: DebugMon_Handler + Definitions + At line 207 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 67 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 209 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + + + +ARM Macro Assembler Page 5 Alphabetic symbol ordering +Relocatable symbols + + +Default_Handler 0000001A + +Symbol: Default_Handler + Definitions + At line 221 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + None +Comment: Default_Handler unused +EXTI0_IRQHandler 0000001A + +Symbol: EXTI0_IRQHandler + Definitions + At line 286 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 79 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 229 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +EXTI15_10_IRQHandler 0000001A + +Symbol: EXTI15_10_IRQHandler + Definitions + At line 315 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 113 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 258 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +EXTI1_IRQHandler 0000001A + +Symbol: EXTI1_IRQHandler + Definitions + At line 287 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 80 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 230 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +EXTI2_IRQHandler 0000001A + +Symbol: EXTI2_IRQHandler + Definitions + At line 288 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 81 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 231 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +EXTI3_IRQHandler 0000001A + + + +ARM Macro Assembler Page 6 Alphabetic symbol ordering +Relocatable symbols + + +Symbol: EXTI3_IRQHandler + Definitions + At line 289 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 82 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 232 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +EXTI4_IRQHandler 0000001A + +Symbol: EXTI4_IRQHandler + Definitions + At line 290 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 83 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 233 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +EXTI9_5_IRQHandler 0000001A + +Symbol: EXTI9_5_IRQHandler + Definitions + At line 299 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 96 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 242 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +FLASH_IRQHandler 0000001A + +Symbol: FLASH_IRQHandler + Definitions + At line 284 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 77 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 227 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +FPU_IRQHandler 0000001A + +Symbol: FPU_IRQHandler + Definitions + At line 334 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 154 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 277 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + + + + +ARM Macro Assembler Page 7 Alphabetic symbol ordering +Relocatable symbols + +HardFault_Handler 0000000A + +Symbol: HardFault_Handler + Definitions + At line 183 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 58 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 185 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +I2C1_ER_IRQHandler 0000001A + +Symbol: I2C1_ER_IRQHandler + Definitions + At line 308 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 105 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 251 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +I2C1_EV_IRQHandler 0000001A + +Symbol: I2C1_EV_IRQHandler + Definitions + At line 307 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 104 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 250 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +I2C2_ER_IRQHandler 0000001A + +Symbol: I2C2_ER_IRQHandler + Definitions + At line 310 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 107 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 253 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +I2C2_EV_IRQHandler 0000001A + +Symbol: I2C2_EV_IRQHandler + Definitions + At line 309 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 106 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 252 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + + + +ARM Macro Assembler Page 8 Alphabetic symbol ordering +Relocatable symbols + + +I2C3_ER_IRQHandler 0000001A + +Symbol: I2C3_ER_IRQHandler + Definitions + At line 333 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 146 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 276 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +I2C3_EV_IRQHandler 0000001A + +Symbol: I2C3_EV_IRQHandler + Definitions + At line 332 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 145 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 275 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +MemManage_Handler 0000000C + +Symbol: MemManage_Handler + Definitions + At line 188 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 59 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 190 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +NMI_Handler 00000008 + +Symbol: NMI_Handler + Definitions + At line 179 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 57 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 180 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +OTG_FS_IRQHandler 0000001A + +Symbol: OTG_FS_IRQHandler + Definitions + At line 327 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 140 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 270 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG + + + +ARM Macro Assembler Page 9 Alphabetic symbol ordering +Relocatable symbols + +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +OTG_FS_WKUP_IRQHandler 0000001A + +Symbol: OTG_FS_WKUP_IRQHandler + Definitions + At line 317 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 115 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 260 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +PVD_IRQHandler 0000001A + +Symbol: PVD_IRQHandler + Definitions + At line 281 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 74 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 224 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +PendSV_Handler 00000016 + +Symbol: PendSV_Handler + Definitions + At line 212 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 69 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 213 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +RCC_IRQHandler 0000001A + +Symbol: RCC_IRQHandler + Definitions + At line 285 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 78 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 228 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +RTC_Alarm_IRQHandler 0000001A + +Symbol: RTC_Alarm_IRQHandler + Definitions + At line 316 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 114 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + + + +ARM Macro Assembler Page 10 Alphabetic symbol ordering +Relocatable symbols + + At line 259 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +RTC_WKUP_IRQHandler 0000001A + +Symbol: RTC_WKUP_IRQHandler + Definitions + At line 283 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 76 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 226 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +Reset_Handler 00000000 + +Symbol: Reset_Handler + Definitions + At line 166 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 56 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 167 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +SDIO_IRQHandler 0000001A + +Symbol: SDIO_IRQHandler + Definitions + At line 319 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 122 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 262 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +SPI1_IRQHandler 0000001A + +Symbol: SPI1_IRQHandler + Definitions + At line 311 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 108 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 254 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +SPI2_IRQHandler 0000001A + +Symbol: SPI2_IRQHandler + Definitions + At line 312 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 109 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG + + + +ARM Macro Assembler Page 11 Alphabetic symbol ordering +Relocatable symbols + +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 255 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +SPI3_IRQHandler 0000001A + +Symbol: SPI3_IRQHandler + Definitions + At line 321 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 124 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 264 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +SPI4_IRQHandler 0000001A + +Symbol: SPI4_IRQHandler + Definitions + At line 335 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 157 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 278 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +SVC_Handler 00000012 + +Symbol: SVC_Handler + Definitions + At line 203 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 66 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 204 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +SysTick_Handler 00000018 + +Symbol: SysTick_Handler + Definitions + At line 216 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 70 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 217 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +TAMP_STAMP_IRQHandler 0000001A + +Symbol: TAMP_STAMP_IRQHandler + Definitions + At line 282 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + + + +ARM Macro Assembler Page 12 Alphabetic symbol ordering +Relocatable symbols + + At line 75 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 225 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +TIM1_BRK_TIM9_IRQHandler 0000001A + +Symbol: TIM1_BRK_TIM9_IRQHandler + Definitions + At line 300 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 97 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 243 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +TIM1_CC_IRQHandler 0000001A + +Symbol: TIM1_CC_IRQHandler + Definitions + At line 303 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 100 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 246 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +TIM1_TRG_COM_TIM11_IRQHandler 0000001A + +Symbol: TIM1_TRG_COM_TIM11_IRQHandler + Definitions + At line 302 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 99 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 245 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +TIM1_UP_TIM10_IRQHandler 0000001A + +Symbol: TIM1_UP_TIM10_IRQHandler + Definitions + At line 301 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 98 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 244 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +TIM2_IRQHandler 0000001A + +Symbol: TIM2_IRQHandler + Definitions + At line 304 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + + + +ARM Macro Assembler Page 13 Alphabetic symbol ordering +Relocatable symbols + + Uses + At line 101 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 247 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +TIM3_IRQHandler 0000001A + +Symbol: TIM3_IRQHandler + Definitions + At line 305 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 102 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 248 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +TIM4_IRQHandler 0000001A + +Symbol: TIM4_IRQHandler + Definitions + At line 306 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 103 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 249 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +TIM5_IRQHandler 0000001A + +Symbol: TIM5_IRQHandler + Definitions + At line 320 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 123 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 263 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +USART1_IRQHandler 0000001A + +Symbol: USART1_IRQHandler + Definitions + At line 313 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 110 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 256 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +USART2_IRQHandler 0000001A + +Symbol: USART2_IRQHandler + Definitions + At line 314 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG + + + +ARM Macro Assembler Page 14 Alphabetic symbol ordering +Relocatable symbols + +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 111 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 257 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +USART6_IRQHandler 0000001A + +Symbol: USART6_IRQHandler + Definitions + At line 331 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 144 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 274 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +UsageFault_Handler 00000010 + +Symbol: UsageFault_Handler + Definitions + At line 198 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 61 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 200 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +WWDG_IRQHandler 0000001A + +Symbol: WWDG_IRQHandler + Definitions + At line 280 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 73 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + At line 223 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + +68 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Absolute symbols + +__Vectors_Size 00000194 + +Symbol: __Vectors_Size + Definitions + At line 161 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 53 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S +Comment: __Vectors_Size used once +__initial_sp 20018000 + +Symbol: __initial_sp + Definitions + At line 43 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 55 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGE +T_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S +Comment: __initial_sp used once +2 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +External symbols + +SystemInit 00000000 + +Symbol: SystemInit + Definitions + At line 168 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 171 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S +Comment: SystemInit used once +__main 00000000 + +Symbol: __main + Definitions + At line 169 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S + Uses + At line 173 in file mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARG +ET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S +Comment: __main used once +2 symbols +411 symbols in table
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/AnalogIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/AnalogIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,128 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_H
+#define MBED_ANALOGIN_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGIN
+
+#include "analogin_api.h"
+#include "SingletonPtr.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** An analog input, used for reading the voltage on a pin
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * // Print messages when the AnalogIn is greater than 50%
+ *
+ * #include "mbed.h"
+ *
+ * AnalogIn temperature(p20);
+ *
+ * int main() {
+ * while(1) {
+ * if(temperature > 0.5) {
+ * printf("Too hot! (%f)", temperature.read());
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogIn {
+
+public:
+
+ /** Create an AnalogIn, connected to the specified pin
+ *
+ * @param pin AnalogIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ AnalogIn(PinName pin) {
+ lock();
+ analogin_init(&_adc, pin);
+ unlock();
+ }
+
+ /** Read the input voltage, represented as a float in the range [0.0, 1.0]
+ *
+ * @returns A floating-point value representing the current input voltage, measured as a percentage
+ */
+ float read() {
+ lock();
+ float ret = analogin_read(&_adc);
+ unlock();
+ return ret;
+ }
+
+ /** Read the input voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @returns
+ * 16-bit unsigned short representing the current input voltage, normalised to a 16-bit value
+ */
+ unsigned short read_u16() {
+ lock();
+ unsigned short ret = analogin_read_u16(&_adc);
+ unlock();
+ return ret;
+ }
+
+ /** An operator shorthand for read()
+ *
+ * The float() operator can be used as a shorthand for read() to simplify common code sequences
+ *
+ * Example:
+ * @code
+ * float x = volume.read();
+ * float x = volume;
+ *
+ * if(volume.read() > 0.25) { ... }
+ * if(volume > 0.25) { ... }
+ * @endcode
+ */
+ operator float() {
+ // Underlying call is thread safe
+ return read();
+ }
+
+ virtual ~AnalogIn() {
+ // Do nothing
+ }
+
+protected:
+
+ virtual void lock() {
+ _mutex->lock();
+ }
+
+ virtual void unlock() {
+ _mutex->unlock();
+ }
+
+ analogin_t _adc;
+ static SingletonPtr<PlatformMutex> _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/AnalogOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/AnalogOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,146 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_H
+#define MBED_ANALOGOUT_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "analogout_api.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** An analog output, used for setting the voltage on a pin
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * // Make a sawtooth output
+ *
+ * #include "mbed.h"
+ *
+ * AnalogOut tri(p18);
+ * int main() {
+ * while(1) {
+ * tri = tri + 0.01;
+ * wait_us(1);
+ * if(tri == 1) {
+ * tri = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogOut {
+
+public:
+
+ /** Create an AnalogOut connected to the specified pin
+ *
+ * @param AnalogOut pin to connect to (18)
+ */
+ AnalogOut(PinName pin) {
+ analogout_init(&_dac, pin);
+ }
+
+ /** Set the output voltage, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output voltage,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ lock();
+ analogout_write(&_dac, value);
+ unlock();
+ }
+
+ /** Set the output voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @param value 16-bit unsigned short representing the output voltage,
+ * normalised to a 16-bit value (0x0000 = 0v, 0xFFFF = 3.3v)
+ */
+ void write_u16(unsigned short value) {
+ lock();
+ analogout_write_u16(&_dac, value);
+ unlock();
+ }
+
+ /** Return the current output voltage setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current voltage being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous write().
+ */
+ float read() {
+ lock();
+ float ret = analogout_read(&_dac);
+ unlock();
+ return ret;
+ }
+
+ /** An operator shorthand for write()
+ */
+ AnalogOut& operator= (float percent) {
+ // Underlying write call is thread safe
+ write(percent);
+ return *this;
+ }
+
+ AnalogOut& operator= (AnalogOut& rhs) {
+ // Underlying write call is thread safe
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ // Underlying read call is thread safe
+ return read();
+ }
+
+ virtual ~AnalogOut() {
+ // Do nothing
+ }
+
+protected:
+
+ virtual void lock() {
+ _mutex.lock();
+ }
+
+ virtual void unlock() {
+ _mutex.unlock();
+ }
+
+ dac_t _dac;
+ PlatformMutex _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/BusIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/BusIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSIN_H
+#define MBED_BUSIN_H
+
+#include "platform.h"
+#include "DigitalIn.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** A digital input bus, used for reading the state of a collection of pins
+ *
+ * @Note Synchronization level: Thread safe
+ */
+class BusIn {
+
+public:
+ /* Group: Configuration Methods */
+
+ /** Create an BusIn, connected to the specified pins
+ *
+ * @param <n> DigitalIn pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusIn(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusIn(PinName pins[16]);
+
+ virtual ~BusIn();
+
+ /** Read the value of the input bus
+ *
+ * @returns
+ * An integer with each bit corresponding to the value read from the associated DigitalIn pin
+ */
+ int read();
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ // No lock needed since _nc_mask is not modified outside the constructor
+ return _nc_mask;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int();
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalIn & operator[] (int index);
+
+protected:
+ DigitalIn* _pin[16];
+
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
+ PlatformMutex _mutex;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ virtual void lock();
+ virtual void unlock();
+ BusIn(const BusIn&);
+ BusIn & operator = (const BusIn&);
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/BusInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/BusInOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,123 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSINOUT_H
+#define MBED_BUSINOUT_H
+
+#include "DigitalInOut.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** A digital input output bus, used for setting the state of a collection of pins
+ *
+ * @Note Synchronization level: Thread safe
+ */
+class BusInOut {
+
+public:
+
+ /** Create an BusInOut, connected to the specified pins
+ *
+ * @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusInOut(PinName pins[16]);
+
+ virtual ~BusInOut();
+
+ /* Group: Access Methods */
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalInOut pin
+ */
+ void write(int value);
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalInOut pin setting
+ */
+ int read();
+
+ /** Set as an output
+ */
+ void output();
+
+ /** Set as an input
+ */
+ void input();
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ // No lock needed since _nc_mask is not modified outside the constructor
+ return _nc_mask;
+ }
+
+ /** A shorthand for write()
+ */
+ BusInOut& operator= (int v);
+ BusInOut& operator= (BusInOut& rhs);
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalInOut& operator[] (int index);
+
+ /** A shorthand for read()
+ */
+ operator int();
+
+protected:
+ virtual void lock();
+ virtual void unlock();
+ DigitalInOut* _pin[16];
+
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
+ PlatformMutex _mutex;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ BusInOut(const BusInOut&);
+ BusInOut & operator = (const BusInOut&);
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/BusOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/BusOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,107 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSOUT_H
+#define MBED_BUSOUT_H
+
+#include "DigitalOut.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** A digital output bus, used for setting the state of a collection of pins
+ */
+class BusOut {
+
+public:
+
+ /** Create an BusOut, connected to the specified pins
+ *
+ * @param p<n> DigitalOut pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusOut(PinName pins[16]);
+
+ virtual ~BusOut();
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalOut pin
+ */
+ void write(int value);
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalOut pin setting
+ */
+ int read();
+
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ // No lock needed since _nc_mask is not modified outside the constructor
+ return _nc_mask;
+ }
+
+ /** A shorthand for write()
+ */
+ BusOut& operator= (int v);
+ BusOut& operator= (BusOut& rhs);
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalOut& operator[] (int index);
+
+ /** A shorthand for read()
+ */
+ operator int();
+
+protected:
+ virtual void lock();
+ virtual void unlock();
+ DigitalOut* _pin[16];
+
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
+ PlatformMutex _mutex;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ BusOut(const BusOut&);
+ BusOut & operator = (const BusOut&);
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/CAN.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/CAN.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,259 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_H
+#define MBED_CAN_H
+
+#include "platform.h"
+
+#if DEVICE_CAN
+
+#include "can_api.h"
+#include "can_helper.h"
+#include "Callback.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** CANMessage class
+ *
+ * @Note Synchronization level: Thread safe
+ */
+class CANMessage : public CAN_Message {
+
+public:
+ /** Creates empty CAN message.
+ */
+ CANMessage() : CAN_Message() {
+ len = 8;
+ type = CANData;
+ format = CANStandard;
+ id = 0;
+ memset(data, 0, 8);
+ }
+
+ /** Creates CAN message with specific content.
+ */
+ CANMessage(int _id, const char *_data, char _len = 8, CANType _type = CANData, CANFormat _format = CANStandard) {
+ len = _len & 0xF;
+ type = _type;
+ format = _format;
+ id = _id;
+ memcpy(data, _data, _len);
+ }
+
+ /** Creates CAN remote message.
+ */
+ CANMessage(int _id, CANFormat _format = CANStandard) {
+ len = 0;
+ type = CANRemote;
+ format = _format;
+ id = _id;
+ memset(data, 0, 8);
+ }
+};
+
+/** A can bus client, used for communicating with can devices
+ */
+class CAN {
+
+public:
+ /** Creates an CAN interface connected to specific pins.
+ *
+ * @param rd read from transmitter
+ * @param td transmit to transmitter
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * Ticker ticker;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ * CAN can1(p9, p10);
+ * CAN can2(p30, p29);
+ *
+ * char counter = 0;
+ *
+ * void send() {
+ * if(can1.write(CANMessage(1337, &counter, 1))) {
+ * printf("Message sent: %d\n", counter);
+ * counter++;
+ * }
+ * led1 = !led1;
+ * }
+ *
+ * int main() {
+ * ticker.attach(&send, 1);
+ * CANMessage msg;
+ * while(1) {
+ * if(can2.read(msg)) {
+ * printf("Message received: %d\n\n", msg.data[0]);
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+ CAN(PinName rd, PinName td);
+ virtual ~CAN();
+
+ /** Set the frequency of the CAN interface
+ *
+ * @param hz The bus frequency in hertz
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise
+ */
+ int frequency(int hz);
+
+ /** Write a CANMessage to the bus.
+ *
+ * @param msg The CANMessage to write.
+ *
+ * @returns
+ * 0 if write failed,
+ * 1 if write was successful
+ */
+ int write(CANMessage msg);
+
+ /** Read a CANMessage from the bus.
+ *
+ * @param msg A CANMessage to read to.
+ * @param handle message filter handle (0 for any message)
+ *
+ * @returns
+ * 0 if no message arrived,
+ * 1 if message arrived
+ */
+ int read(CANMessage &msg, int handle = 0);
+
+ /** Reset CAN interface.
+ *
+ * To use after error overflow.
+ */
+ void reset();
+
+ /** Puts or removes the CAN interface into silent monitoring mode
+ *
+ * @param silent boolean indicating whether to go into silent mode or not
+ */
+ void monitor(bool silent);
+
+ enum Mode {
+ Reset = 0,
+ Normal,
+ Silent,
+ LocalTest,
+ GlobalTest,
+ SilentTest
+ };
+
+ /** Change CAN operation to the specified mode
+ *
+ * @param mode The new operation mode (CAN::Normal, CAN::Silent, CAN::LocalTest, CAN::GlobalTest, CAN::SilentTest)
+ *
+ * @returns
+ * 0 if mode change failed or unsupported,
+ * 1 if mode change was successful
+ */
+ int mode(Mode mode);
+
+ /** Filter out incomming messages
+ *
+ * @param id the id to filter on
+ * @param mask the mask applied to the id
+ * @param format format to filter on (Default CANAny)
+ * @param handle message filter handle (Optional)
+ *
+ * @returns
+ * 0 if filter change failed or unsupported,
+ * new filter handle if successful
+ */
+ int filter(unsigned int id, unsigned int mask, CANFormat format = CANAny, int handle = 0);
+
+ /** Returns number of read errors to detect read overflow errors.
+ */
+ unsigned char rderror();
+
+ /** Returns number of write errors to detect write overflow errors.
+ */
+ unsigned char tderror();
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq,
+ EwIrq,
+ DoIrq,
+ WuIrq,
+ EpIrq,
+ AlIrq,
+ BeIrq,
+ IdIrq,
+
+ IrqCnt
+ };
+
+ /** Attach a function to call whenever a CAN frame received interrupt is
+ * generated.
+ *
+ * @param func A pointer to a void function, or 0 to set as none
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, CAN::TxIrq for transmitted or aborted, CAN::EwIrq for error warning, CAN::DoIrq for data overrun, CAN::WuIrq for wake-up, CAN::EpIrq for error passive, CAN::AlIrq for arbitration lost, CAN::BeIrq for bus error)
+ */
+ void attach(Callback<void()> func, IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a CAN frame received interrupt
+ * is generated.
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, TxIrq for transmitted or aborted, EwIrq for error warning, DoIrq for data overrun, WuIrq for wake-up, EpIrq for error passive, AlIrq for arbitration lost, BeIrq for bus error)
+ */
+ template<typename T>
+ void attach(T* obj, void (T::*method)(), IrqType type=RxIrq) {
+ // Underlying call thread safe
+ attach(Callback<void()>(obj, method), type);
+ }
+
+ /** Attach a member function to call whenever a CAN frame received interrupt
+ * is generated.
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, TxIrq for transmitted or aborted, EwIrq for error warning, DoIrq for data overrun, WuIrq for wake-up, EpIrq for error passive, AlIrq for arbitration lost, BeIrq for bus error)
+ */
+ template<typename T>
+ void attach(T* obj, void (*method)(T*), IrqType type=RxIrq) {
+ // Underlying call thread safe
+ attach(Callback<void()>(obj, method), type);
+ }
+
+ static void _irq_handler(uint32_t id, CanIrqType type);
+
+protected:
+ virtual void lock();
+ virtual void unlock();
+ can_t _can;
+ Callback<void()> _irq[IrqCnt];
+ PlatformMutex _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif // MBED_CAN_H
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/CThunk.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/CThunk.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,234 @@
+/* General C++ Object Thunking class
+ *
+ * - allows direct callbacks to non-static C++ class functions
+ * - keeps track for the corresponding class instance
+ * - supports an optional context parameter for the called function
+ * - ideally suited for class object receiving interrupts (NVIC_SetVector)
+ *
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/* General C++ Object Thunking class
+ *
+ * - allows direct callbacks to non-static C++ class functions
+ * - keeps track for the corresponding class instance
+ * - supports an optional context parameter for the called function
+ * - ideally suited for class object receiving interrupts (NVIC_SetVector)
+ */
+
+#ifndef __CTHUNK_H__
+#define __CTHUNK_H__
+
+#define CTHUNK_ADDRESS 1
+
+#if (defined(__CORTEX_M3) || defined(__CORTEX_M4) || defined(__thumb2__)) && ! defined(__CORTEX_A9)
+#define CTHUNK_VARIABLES volatile uint32_t code[1]
+/**
+* CTHUNK disassembly for Cortex-M3/M4 (thumb2):
+* * ldm.w pc,{r0,r1,r2,pc}
+*
+* This instruction loads the arguments for the static thunking function to r0-r2, and
+* branches to that function by loading its address into PC.
+*
+* This is safe for both regular calling and interrupt calling, since it only touches scratch registers
+* which should be saved by the caller, and are automatically saved as part of the IRQ context switch.
+*/
+#define CTHUNK_ASSIGMENT m_thunk.code[0] = 0x8007E89F
+
+#elif defined(__CORTEX_M0PLUS) || defined(__CORTEX_M0) || defined(__CORTEX_A9)
+/*
+* CTHUNK disassembly for Cortex M0 (thumb):
+* * push {r0,r1,r2,r3,r4,lr} save touched registers and return address
+* * movs r4,#4 set up address to load arguments from (immediately following this code block) (1)
+* * add r4,pc set up address to load arguments from (immediately following this code block) (2)
+* * ldm r4!,{r0,r1,r2,r3} load arguments for static thunk function
+* * blx r3 call static thunk function
+* * pop {r0,r1,r2,r3,r4,pc} restore scratch registers and return from function
+*/
+#define CTHUNK_VARIABLES volatile uint32_t code[3]
+#define CTHUNK_ASSIGMENT do { \
+ m_thunk.code[0] = 0x2404B51F; \
+ m_thunk.code[1] = 0xCC0F447C; \
+ m_thunk.code[2] = 0xBD1F4798; \
+ } while (0)
+
+#else
+#error "Target is not currently suported."
+#endif
+
+/* IRQ/Exception compatible thunk entry function */
+typedef void (*CThunkEntry)(void);
+
+/**
+ * Class for created a pointer with data bound to it
+ *
+ * @Note Synchronization level: Not protected
+ */
+template<class T>
+class CThunk
+{
+ public:
+ typedef void (T::*CCallbackSimple)(void);
+ typedef void (T::*CCallback)(void* context);
+
+ inline CThunk(T *instance)
+ {
+ init(instance, NULL, NULL);
+ }
+
+ inline CThunk(T *instance, CCallback callback)
+ {
+ init(instance, callback, NULL);
+ }
+
+ ~CThunk() {
+
+ }
+
+ inline CThunk(T *instance, CCallbackSimple callback)
+ {
+ init(instance, (CCallback)callback, NULL);
+ }
+
+ inline CThunk(T &instance, CCallback callback)
+ {
+ init(instance, callback, NULL);
+ }
+
+ inline CThunk(T &instance, CCallbackSimple callback)
+ {
+ init(instance, (CCallback)callback, NULL);
+ }
+
+ inline CThunk(T &instance, CCallback callback, void* context)
+ {
+ init(instance, callback, context);
+ }
+
+ inline void callback(CCallback callback)
+ {
+ m_callback = callback;
+ }
+
+ inline void callback(CCallbackSimple callback)
+ {
+ m_callback = (CCallback)callback;
+ }
+
+ inline void context(void* context)
+ {
+ m_thunk.context = (uint32_t)context;
+ }
+
+ inline void context(uint32_t context)
+ {
+ m_thunk.context = context;
+ }
+
+ inline uint32_t entry(void)
+ {
+ return (((uint32_t)&m_thunk)|CTHUNK_ADDRESS);
+ }
+
+ /* get thunk entry point for connecting rhunk to an IRQ table */
+ inline operator CThunkEntry(void)
+ {
+ return (CThunkEntry)entry();
+ }
+
+ /* get thunk entry point for connecting rhunk to an IRQ table */
+ inline operator uint32_t(void)
+ {
+ return entry();
+ }
+
+ /* simple test function */
+ inline void call(void)
+ {
+ (((CThunkEntry)(entry()))());
+ }
+
+ private:
+ T* m_instance;
+ volatile CCallback m_callback;
+
+// TODO: this needs proper fix, to refactor toolchain header file and all its use
+// PACKED there is not defined properly for IAR
+#if defined (__ICCARM__)
+ typedef __packed struct
+ {
+ CTHUNK_VARIABLES;
+ volatile uint32_t instance;
+ volatile uint32_t context;
+ volatile uint32_t callback;
+ volatile uint32_t trampoline;
+ } CThunkTrampoline;
+#else
+ typedef struct
+ {
+ CTHUNK_VARIABLES;
+ volatile uint32_t instance;
+ volatile uint32_t context;
+ volatile uint32_t callback;
+ volatile uint32_t trampoline;
+ } __attribute__((__packed__)) CThunkTrampoline;
+#endif
+
+ static void trampoline(T* instance, void* context, CCallback* callback)
+ {
+ if(instance && *callback) {
+ (static_cast<T*>(instance)->**callback)(context);
+ }
+ }
+
+ volatile CThunkTrampoline m_thunk;
+
+ inline void init(T *instance, CCallback callback, void* context)
+ {
+ /* remember callback - need to add this level of redirection
+ as pointer size for member functions differs between platforms */
+ m_callback = callback;
+
+ /* populate thunking trampoline */
+ CTHUNK_ASSIGMENT;
+ m_thunk.context = (uint32_t)context;
+ m_thunk.instance = (uint32_t)instance;
+ m_thunk.callback = (uint32_t)&m_callback;
+ m_thunk.trampoline = (uint32_t)&trampoline;
+
+#if defined(__CORTEX_A9)
+ /* Data cache clean */
+ /* Cache control */
+ {
+ uint32_t start_addr = (uint32_t)&m_thunk & 0xFFFFFFE0;
+ uint32_t end_addr = (uint32_t)&m_thunk + sizeof(m_thunk);
+ uint32_t addr;
+
+ /* Data cache clean and invalid */
+ for (addr = start_addr; addr < end_addr; addr += 0x20) {
+ __v7_clean_inv_dcache_mva((void *)addr);
+ }
+ /* Instruction cache invalid */
+ __v7_inv_icache_all();
+ __ca9u_inv_tlb_all();
+ __v7_inv_btac();
+ }
+#endif
+ __ISB();
+ __DSB();
+ }
+};
+
+#endif/*__CTHUNK_H__*/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/CallChain.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/CallChain.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,173 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CALLCHAIN_H
+#define MBED_CALLCHAIN_H
+
+#include "Callback.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Group one or more functions in an instance of a CallChain, then call them in
+ * sequence using CallChain::call(). Used mostly by the interrupt chaining code,
+ * but can be used for other purposes.
+ *
+ * @Note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * CallChain chain;
+ *
+ * void first(void) {
+ * printf("'first' function.\n");
+ * }
+ *
+ * void second(void) {
+ * printf("'second' function.\n");
+ * }
+ *
+ * class Test {
+ * public:
+ * void f(void) {
+ * printf("A::f (class member).\n");
+ * }
+ * };
+ *
+ * int main() {
+ * Test test;
+ *
+ * chain.add(second);
+ * chain.add_front(first);
+ * chain.add(&test, &Test::f);
+ * chain.call();
+ * }
+ * @endcode
+ */
+
+typedef Callback<void()> *pFunctionPointer_t;
+class CallChainLink;
+
+class CallChain {
+public:
+ /** Create an empty chain
+ *
+ * @param size (optional) Initial size of the chain
+ */
+ CallChain(int size = 4);
+ virtual ~CallChain();
+
+ /** Add a function at the end of the chain
+ *
+ * @param func A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'func'
+ */
+ pFunctionPointer_t add(Callback<void()> func);
+
+ /** Add a function at the end of the chain
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'obj' and 'method'
+ */
+ template<typename T, typename M>
+ pFunctionPointer_t add(T *obj, M method) {
+ return add(Callback<void()>(obj, method));
+ }
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param func A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'func'
+ */
+ pFunctionPointer_t add_front(Callback<void()> func);
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T, typename M>
+ pFunctionPointer_t add_front(T *obj, M method) {
+ return add_front(Callback<void()>(obj, method));
+ }
+
+ /** Get the number of functions in the chain
+ */
+ int size() const;
+
+ /** Get a function object from the chain
+ *
+ * @param i function object index
+ *
+ * @returns
+ * The function object at position 'i' in the chain
+ */
+ pFunctionPointer_t get(int i) const;
+
+ /** Look for a function object in the call chain
+ *
+ * @param f the function object to search
+ *
+ * @returns
+ * The index of the function object if found, -1 otherwise.
+ */
+ int find(pFunctionPointer_t f) const;
+
+ /** Clear the call chain (remove all functions in the chain).
+ */
+ void clear();
+
+ /** Remove a function object from the chain
+ *
+ * @arg f the function object to remove
+ *
+ * @returns
+ * true if the function object was found and removed, false otherwise.
+ */
+ bool remove(pFunctionPointer_t f);
+
+ /** Call all the functions in the chain in sequence
+ */
+ void call();
+
+ void operator ()(void) {
+ call();
+ }
+ pFunctionPointer_t operator [](int i) const {
+ return get(i);
+ }
+
+ /* disallow copy constructor and assignment operators */
+private:
+ CallChain(const CallChain&);
+ CallChain & operator = (const CallChain&);
+ CallChainLink *_chain;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/Callback.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/Callback.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,883 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CALLBACK_H
+#define MBED_CALLBACK_H
+
+#include <string.h>
+#include <stdint.h>
+
+namespace mbed {
+
+
+/** Callback class based on template specialization
+ *
+ * @Note Synchronization level: Not protected
+ */
+template <typename F>
+class Callback;
+
+/** Templated function class
+ */
+template <typename R, typename A0, typename A1, typename A2, typename A3, typename A4>
+class Callback<R(A0, A1, A2, A3, A4)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0, A1, A2, A3, A4) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0, A1, A2, A3, A4)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0, A1, A2, A3, A4)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0, A1, A2, A3, A4)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0, A1, A2, A3, A4)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0, A1, A2, A3, A4)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0, A1, A2, A3, A4)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0, A1, A2, A3, A4)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0, a1, a2, a3, a4);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return call(a0, a1, a2, a3, a4);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return static_cast<Callback<R(A0, A1, A2, A3, A4)>*>(func)
+ ->call(a0, a1, a2, a3, a4);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return (*reinterpret_cast<R (**)(A0, A1, A2, A3, A4)>(func))
+ (a0, a1, a2, a3, a4);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return (*reinterpret_cast<R (**)(T*, A0, A1, A2, A3, A4)>(func))
+ (static_cast<T*>(obj), a0, a1, a2, a3, a4);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0, A1, A2, A3, A4)>(func)))
+ (a0, a1, a2, a3, a4);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0, A1, A2, A3, A4);
+};
+
+/** Templated function class
+ */
+template <typename R, typename A0, typename A1, typename A2, typename A3>
+class Callback<R(A0, A1, A2, A3)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0, A1, A2, A3) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0, A1, A2, A3)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0, A1, A2, A3)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0, A1, A2, A3)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0, A1, A2, A3)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0, A1, A2, A3)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0, A1, A2, A3)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0, A1, A2, A3)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0, A1 a1, A2 a2, A3 a3) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0, a1, a2, a3);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0, A1 a1, A2 a2, A3 a3) {
+ return call(a0, a1, a2, a3);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0, A1 a1, A2 a2, A3 a3) {
+ return static_cast<Callback<R(A0, A1, A2, A3)>*>(func)
+ ->call(a0, a1, a2, a3);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0, A1 a1, A2 a2, A3 a3) {
+ return (*reinterpret_cast<R (**)(A0, A1, A2, A3)>(func))
+ (a0, a1, a2, a3);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2, A3 a3) {
+ return (*reinterpret_cast<R (**)(T*, A0, A1, A2, A3)>(func))
+ (static_cast<T*>(obj), a0, a1, a2, a3);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2, A3 a3) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0, A1, A2, A3)>(func)))
+ (a0, a1, a2, a3);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0, A1, A2, A3);
+};
+
+/** Templated function class
+ */
+template <typename R, typename A0, typename A1, typename A2>
+class Callback<R(A0, A1, A2)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0, A1, A2) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0, A1, A2)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0, A1, A2)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0, A1, A2)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0, A1, A2)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0, A1, A2)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0, A1, A2)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0, A1, A2)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0, A1 a1, A2 a2) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0, a1, a2);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0, A1 a1, A2 a2) {
+ return call(a0, a1, a2);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0, A1 a1, A2 a2) {
+ return static_cast<Callback<R(A0, A1, A2)>*>(func)
+ ->call(a0, a1, a2);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0, A1 a1, A2 a2) {
+ return (*reinterpret_cast<R (**)(A0, A1, A2)>(func))
+ (a0, a1, a2);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2) {
+ return (*reinterpret_cast<R (**)(T*, A0, A1, A2)>(func))
+ (static_cast<T*>(obj), a0, a1, a2);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0, A1, A2)>(func)))
+ (a0, a1, a2);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0, A1, A2);
+};
+
+/** Templated function class
+ */
+template <typename R, typename A0, typename A1>
+class Callback<R(A0, A1)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0, A1) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0, A1)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0, A1)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0, A1)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0, A1)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0, A1)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0, A1)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0, A1)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0, A1 a1) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0, a1);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0, A1 a1) {
+ return call(a0, a1);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0, A1 a1) {
+ return static_cast<Callback<R(A0, A1)>*>(func)
+ ->call(a0, a1);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0, A1 a1) {
+ return (*reinterpret_cast<R (**)(A0, A1)>(func))
+ (a0, a1);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0, A1 a1) {
+ return (*reinterpret_cast<R (**)(T*, A0, A1)>(func))
+ (static_cast<T*>(obj), a0, a1);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0, A1 a1) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0, A1)>(func)))
+ (a0, a1);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0, A1);
+};
+
+/** Templated function class
+ */
+template <typename R, typename A0>
+class Callback<R(A0)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0) {
+ return call(a0);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0) {
+ return static_cast<Callback<R(A0)>*>(func)
+ ->call(a0);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0) {
+ return (*reinterpret_cast<R (**)(A0)>(func))
+ (a0);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0) {
+ return (*reinterpret_cast<R (**)(T*, A0)>(func))
+ (static_cast<T*>(obj), a0);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0)>(func)))
+ (a0);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0);
+};
+
+/** Templated function class
+ */
+template <typename R>
+class Callback<R()> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)() = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)()) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R()> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)()) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)()) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R()> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call() {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func);
+ }
+
+ /** Call the attached function
+ */
+ R operator()() {
+ return call();
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func) {
+ return static_cast<Callback<R()>*>(func)
+ ->call();
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func) {
+ return (*reinterpret_cast<R (**)()>(func))
+ ();
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func) {
+ return (*reinterpret_cast<R (**)(T*)>(func))
+ (static_cast<T*>(obj));
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)()>(func)))
+ ();
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*);
+};
+
+ typedef Callback<void(int)> event_callback_t;
+
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/CircularBuffer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/CircularBuffer.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CIRCULARBUFFER_H
+#define MBED_CIRCULARBUFFER_H
+
+#include "critical.h"
+
+namespace mbed {
+
+/** Templated Circular buffer class
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+template<typename T, uint32_t BufferSize, typename CounterType = uint32_t>
+class CircularBuffer {
+public:
+ CircularBuffer() : _head(0), _tail(0), _full(false) {
+ }
+
+ ~CircularBuffer() {
+ }
+
+ /** Push the transaction to the buffer. This overwrites the buffer if it's
+ * full
+ *
+ * @param data Data to be pushed to the buffer
+ */
+ void push(const T& data) {
+ core_util_critical_section_enter();
+ if (full()) {
+ _tail++;
+ _tail %= BufferSize;
+ }
+ _pool[_head++] = data;
+ _head %= BufferSize;
+ if (_head == _tail) {
+ _full = true;
+ }
+ core_util_critical_section_exit();
+ }
+
+ /** Pop the transaction from the buffer
+ *
+ * @param data Data to be pushed to the buffer
+ * @return True if the buffer is not empty and data contains a transaction, false otherwise
+ */
+ bool pop(T& data) {
+ bool data_popped = false;
+ core_util_critical_section_enter();
+ if (!empty()) {
+ data = _pool[_tail++];
+ _tail %= BufferSize;
+ _full = false;
+ data_popped = true;
+ }
+ core_util_critical_section_exit();
+ return data_popped;
+ }
+
+ /** Check if the buffer is empty
+ *
+ * @return True if the buffer is empty, false if not
+ */
+ bool empty() {
+ core_util_critical_section_enter();
+ bool is_empty = (_head == _tail) && !_full;
+ core_util_critical_section_exit();
+ return is_empty;
+ }
+
+ /** Check if the buffer is full
+ *
+ * @return True if the buffer is full, false if not
+ */
+ bool full() {
+ core_util_critical_section_enter();
+ bool full = _full;
+ core_util_critical_section_exit();
+ return full;
+ }
+
+ /** Reset the buffer
+ *
+ */
+ void reset() {
+ core_util_critical_section_enter();
+ _head = 0;
+ _tail = 0;
+ _full = false;
+ core_util_critical_section_exit();
+ }
+
+private:
+ T _pool[BufferSize];
+ volatile CounterType _head;
+ volatile CounterType _tail;
+ volatile bool _full;
+};
+
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/DigitalIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/DigitalIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALIN_H
+#define MBED_DIGITALIN_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A digital input, used for reading the state of a pin
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Flash an LED while a DigitalIn is true
+ *
+ * #include "mbed.h"
+ *
+ * DigitalIn enable(p5);
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * if(enable) {
+ * led = !led;
+ * }
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalIn {
+
+public:
+ /** Create a DigitalIn connected to the specified pin
+ *
+ * @param pin DigitalIn pin to connect to
+ */
+ DigitalIn(PinName pin) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_in(&gpio, pin);
+ }
+
+ /** Create a DigitalIn connected to the specified pin
+ *
+ * @param pin DigitalIn pin to connect to
+ * @param mode the initial mode of the pin
+ */
+ DigitalIn(PinName pin, PinMode mode) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_in_ex(&gpio, pin, mode);
+ }
+ /** Read the input, represented as 0 or 1 (int)
+ *
+ * @returns
+ * An integer representing the state of the input pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ // Thread safe / atomic HAL call
+ return gpio_read(&gpio);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ core_util_critical_section_enter();
+ gpio_mode(&gpio, pull);
+ core_util_critical_section_exit();
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ // Thread safe / atomic HAL call
+ return gpio_is_connected(&gpio);
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator int() {
+ // Underlying read is thread safe
+ return read();
+ }
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/DigitalInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/DigitalInOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,140 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALINOUT_H
+#define MBED_DIGITALINOUT_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A digital input/output, used for setting or reading a bi-directional pin
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class DigitalInOut {
+
+public:
+ /** Create a DigitalInOut connected to the specified pin
+ *
+ * @param pin DigitalInOut pin to connect to
+ */
+ DigitalInOut(PinName pin) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_in(&gpio, pin);
+ }
+
+ /** Create a DigitalInOut connected to the specified pin
+ *
+ * @param pin DigitalInOut pin to connect to
+ * @param direction the initial direction of the pin
+ * @param mode the initial mode of the pin
+ * @param value the initial value of the pin if is an output
+ */
+ DigitalInOut(PinName pin, PinDirection direction, PinMode mode, int value) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_inout(&gpio, pin, direction, mode, value);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ // Thread safe / atomic HAL call
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin if it is an output,
+ * or read the input if set as an input
+ */
+ int read() {
+ // Thread safe / atomic HAL call
+ return gpio_read(&gpio);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ core_util_critical_section_enter();
+ gpio_dir(&gpio, PIN_OUTPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ core_util_critical_section_enter();
+ gpio_dir(&gpio, PIN_INPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ core_util_critical_section_enter();
+ gpio_mode(&gpio, pull);
+ core_util_critical_section_exit();
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ // Thread safe / atomic HAL call
+ return gpio_is_connected(&gpio);
+ }
+
+ /** A shorthand for write()
+ */
+ DigitalInOut& operator= (int value) {
+ // Underlying write is thread safe
+ write(value);
+ return *this;
+ }
+
+ DigitalInOut& operator= (DigitalInOut& rhs) {
+ core_util_critical_section_enter();
+ write(rhs.read());
+ core_util_critical_section_exit();
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ // Underlying call is thread safe
+ return read();
+ }
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/DigitalOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/DigitalOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,126 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALOUT_H
+#define MBED_DIGITALOUT_H
+
+#include "platform.h"
+#include "gpio_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A digital output, used for setting the state of a pin
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Toggle a LED
+ * #include "mbed.h"
+ *
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = !led;
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalOut {
+
+public:
+ /** Create a DigitalOut connected to the specified pin
+ *
+ * @param pin DigitalOut pin to connect to
+ */
+ DigitalOut(PinName pin) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_out(&gpio, pin);
+ }
+
+ /** Create a DigitalOut connected to the specified pin
+ *
+ * @param pin DigitalOut pin to connect to
+ * @param value the initial pin value
+ */
+ DigitalOut(PinName pin, int value) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_out_ex(&gpio, pin, value);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ // Thread safe / atomic HAL call
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ // Thread safe / atomic HAL call
+ return gpio_read(&gpio);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ // Thread safe / atomic HAL call
+ return gpio_is_connected(&gpio);
+ }
+
+ /** A shorthand for write()
+ */
+ DigitalOut& operator= (int value) {
+ // Underlying write is thread safe
+ write(value);
+ return *this;
+ }
+
+ DigitalOut& operator= (DigitalOut& rhs) {
+ core_util_critical_section_enter();
+ write(rhs.read());
+ core_util_critical_section_exit();
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ // Underlying call is thread safe
+ return read();
+ }
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/DirHandle.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/DirHandle.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,120 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIRHANDLE_H
+#define MBED_DIRHANDLE_H
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define NAME_MAX 255
+typedef int mode_t;
+
+#else
+# include <sys/syslimits.h>
+#endif
+
+#include "FileHandle.h"
+
+struct dirent {
+ char d_name[NAME_MAX+1];
+};
+
+namespace mbed {
+
+/** Represents a directory stream. Objects of this type are returned
+ * by a FileSystemLike's opendir method. Implementations must define
+ * at least closedir, readdir and rewinddir.
+ *
+ * If a FileSystemLike class defines the opendir method, then the
+ * directories of an object of that type can be accessed by
+ * DIR *d = opendir("/example/directory") (or opendir("/example")
+ * to open the root of the filesystem), and then using readdir(d) etc.
+ *
+ * The root directory is considered to contain all FileLike and
+ * FileSystemLike objects, so the DIR* returned by opendir("/") will
+ * reflect this.
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class DirHandle {
+
+public:
+ /** Closes the directory.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on error.
+ */
+ virtual int closedir()=0;
+
+ /** Return the directory entry at the current position, and
+ * advances the position to the next entry.
+ *
+ * @returns
+ * A pointer to a dirent structure representing the
+ * directory entry at the current position, or NULL on reaching
+ * end of directory or error.
+ */
+ virtual struct dirent *readdir()=0;
+
+ /** Resets the position to the beginning of the directory.
+ */
+ virtual void rewinddir()=0;
+
+ /** Returns the current position of the DirHandle.
+ *
+ * @returns
+ * the current position,
+ * -1 on error.
+ */
+ virtual off_t telldir() { return -1; }
+
+ /** Sets the position of the DirHandle.
+ *
+ * @param location The location to seek to. Must be a value returned by telldir.
+ */
+ virtual void seekdir(off_t location) { (void)location;}
+
+ virtual ~DirHandle() {}
+
+protected:
+
+ /** Acquire exclusive access to this object.
+ */
+ virtual void lock() {
+ // Stub
+ }
+
+ /** Release exclusive access to this object.
+ */
+ virtual void unlock() {
+ // Stub
+ }
+};
+
+} // namespace mbed
+
+typedef mbed::DirHandle DIR;
+
+extern "C" {
+ DIR *opendir(const char*);
+ struct dirent *readdir(DIR *);
+ int closedir(DIR*);
+ void rewinddir(DIR*);
+ long telldir(DIR*);
+ void seekdir(DIR*, long);
+ int mkdir(const char *name, mode_t n);
+};
+
+#endif /* MBED_DIRHANDLE_H */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/Ethernet.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/Ethernet.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,172 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_H
+#define MBED_ETHERNET_H
+
+#include "platform.h"
+
+#if DEVICE_ETHERNET
+
+namespace mbed {
+
+/** An ethernet interface, to use with the ethernet pins.
+ *
+ * @Note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * // Read destination and source from every ethernet packet
+ *
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * char buf[0x600];
+ *
+ * while(1) {
+ * int size = eth.receive();
+ * if(size > 0) {
+ * eth.read(buf, size);
+ * printf("Destination: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ * printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
+ * }
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class Ethernet {
+
+public:
+
+ /** Initialise the ethernet interface.
+ */
+ Ethernet();
+
+ /** Powers the hardware down.
+ */
+ virtual ~Ethernet();
+
+ enum Mode {
+ AutoNegotiate,
+ HalfDuplex10,
+ FullDuplex10,
+ HalfDuplex100,
+ FullDuplex100
+ };
+
+ /** Writes into an outgoing ethernet packet.
+ *
+ * It will append size bytes of data to the previously written bytes.
+ *
+ * @param data An array to write.
+ * @param size The size of data.
+ *
+ * @returns
+ * The number of written bytes.
+ */
+ int write(const char *data, int size);
+
+ /** Send an outgoing ethernet packet.
+ *
+ * After filling in the data in an ethernet packet it must be send.
+ * Send will provide a new packet to write to.
+ *
+ * @returns
+ * 0 if the sending was failed,
+ * or the size of the packet successfully sent.
+ */
+ int send();
+
+ /** Recevies an arrived ethernet packet.
+ *
+ * Receiving an ethernet packet will drop the last received ethernet packet
+ * and make a new ethernet packet ready to read.
+ * If no ethernet packet is arrived it will return 0.
+ *
+ * @returns
+ * 0 if no ethernet packet is arrived,
+ * or the size of the arrived packet.
+ */
+ int receive();
+
+ /** Read from an recevied ethernet packet.
+ *
+ * After receive returnd a number bigger than 0it is
+ * possible to read bytes from this packet.
+ * Read will write up to size bytes into data.
+ *
+ * It is possible to use read multible times.
+ * Each time read will start reading after the last read byte before.
+ *
+ * @returns
+ * The number of byte read.
+ */
+ int read(char *data, int size);
+
+ /** Gives the ethernet address of the mbed.
+ *
+ * @param mac Must be a pointer to a 6 byte char array to copy the ethernet address in.
+ */
+ void address(char *mac);
+
+ /** Returns if an ethernet link is pressent or not. It takes a wile after Ethernet initializion to show up.
+ *
+ * @returns
+ * 0 if no ethernet link is pressent,
+ * 1 if an ethernet link is pressent.
+ *
+ * Example:
+ * @code
+ * // Using the Ethernet link function
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * wait(1); // Needed after startup.
+ * if (eth.link()) {
+ * printf("online\n");
+ * } else {
+ * printf("offline\n");
+ * }
+ * }
+ * @endcode
+ */
+ int link();
+
+ /** Sets the speed and duplex parameters of an ethernet link
+ *
+ * - AutoNegotiate Auto negotiate speed and duplex
+ * - HalfDuplex10 10 Mbit, half duplex
+ * - FullDuplex10 10 Mbit, full duplex
+ * - HalfDuplex100 100 Mbit, half duplex
+ * - FullDuplex100 100 Mbit, full duplex
+ *
+ * @param mode the speed and duplex mode to set the link to:
+ */
+ void set_link(Mode mode);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/FileBase.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/FileBase.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEBASE_H
+#define MBED_FILEBASE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define O_RDONLY 0
+# define O_WRONLY 1
+# define O_RDWR 2
+# define O_CREAT 0x0200
+# define O_TRUNC 0x0400
+# define O_APPEND 0x0008
+
+# define NAME_MAX 255
+
+typedef int mode_t;
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/fcntl.h>
+# include <sys/types.h>
+# include <sys/syslimits.h>
+#endif
+
+#include "platform.h"
+#include "SingletonPtr.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+typedef enum {
+ FilePathType,
+ FileSystemPathType
+} PathType;
+
+class FileBase {
+public:
+ FileBase(const char *name, PathType t);
+
+ virtual ~FileBase();
+
+ const char* getName(void);
+ PathType getPathType(void);
+
+ static FileBase *lookup(const char *name, unsigned int len);
+
+ static FileBase *get(int n);
+
+ /* disallow copy constructor and assignment operators */
+private:
+ static FileBase *_head;
+ static SingletonPtr<PlatformMutex> _mutex;
+
+ FileBase *_next;
+ const char * const _name;
+ const PathType _path_type;
+ FileBase(const FileBase&);
+ FileBase & operator = (const FileBase&);
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/FileHandle.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/FileHandle.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,140 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEHANDLE_H
+#define MBED_FILEHANDLE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/types.h>
+#endif
+
+namespace mbed {
+
+/** An OO equivalent of the internal FILEHANDLE variable
+ * and associated _sys_* functions.
+ *
+ * FileHandle is an abstract class, needing at least sys_write and
+ * sys_read to be implmented for a simple interactive device.
+ *
+ * No one ever directly tals to/instanciates a FileHandle - it gets
+ * created by FileSystem, and wrapped up by stdio.
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class FileHandle {
+
+public:
+ /** Write the contents of a buffer to the file
+ *
+ * @param buffer the buffer to write from
+ * @param length the number of characters to write
+ *
+ * @returns
+ * The number of characters written (possibly 0) on success, -1 on error.
+ */
+ virtual ssize_t write(const void* buffer, size_t length) = 0;
+
+ /** Close the file
+ *
+ * @returns
+ * Zero on success, -1 on error.
+ */
+ virtual int close() = 0;
+
+ /** Function read
+ * Reads the contents of the file into a buffer
+ *
+ * @param buffer the buffer to read in to
+ * @param length the number of characters to read
+ *
+ * @returns
+ * The number of characters read (zero at end of file) on success, -1 on error.
+ */
+ virtual ssize_t read(void* buffer, size_t length) = 0;
+
+ /** Check if the handle is for a interactive terminal device.
+ * If so, line buffered behaviour is used by default
+ *
+ * @returns
+ * 1 if it is a terminal,
+ * 0 otherwise
+ */
+ virtual int isatty() = 0;
+
+ /** Move the file position to a given offset from a given location.
+ *
+ * @param offset The offset from whence to move to
+ * @param whence SEEK_SET for the start of the file, SEEK_CUR for the
+ * current file position, or SEEK_END for the end of the file.
+ *
+ * @returns
+ * new file position on success,
+ * -1 on failure or unsupported
+ */
+ virtual off_t lseek(off_t offset, int whence) = 0;
+
+ /** Flush any buffers associated with the FileHandle, ensuring it
+ * is up to date on disk
+ *
+ * @returns
+ * 0 on success or un-needed,
+ * -1 on error
+ */
+ virtual int fsync() = 0;
+
+ virtual off_t flen() {
+ lock();
+ /* remember our current position */
+ off_t pos = lseek(0, SEEK_CUR);
+ if(pos == -1) {
+ unlock();
+ return -1;
+ }
+ /* seek to the end to get the file length */
+ off_t res = lseek(0, SEEK_END);
+ /* return to our old position */
+ lseek(pos, SEEK_SET);
+ unlock();
+ return res;
+ }
+
+ virtual ~FileHandle();
+
+protected:
+
+ /** Acquire exclusive access to this object.
+ */
+ virtual void lock() {
+ // Stub
+ }
+
+ /** Release exclusive access to this object.
+ */
+ virtual void unlock() {
+ // Stub
+ }
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/FileLike.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/FileLike.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,47 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILELIKE_H
+#define MBED_FILELIKE_H
+
+#include "FileBase.h"
+#include "FileHandle.h"
+
+namespace mbed {
+
+/* Class FileLike
+ * A file-like object is one that can be opened with fopen by
+ * fopen("/name", mode). It is intersection of the classes Base and
+ * FileHandle.
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class FileLike : public FileHandle, public FileBase {
+
+public:
+ /* Constructor FileLike
+ *
+ * Variables
+ * name - The name to use to open the file.
+ */
+ FileLike(const char *name);
+
+ virtual ~FileLike();
+
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/FilePath.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/FilePath.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEPATH_H
+#define MBED_FILEPATH_H
+
+#include "platform.h"
+
+#include "FileSystemLike.h"
+#include "FileLike.h"
+
+namespace mbed {
+
+class FilePath {
+public:
+ FilePath(const char* file_path);
+
+ const char* fileName(void);
+
+ bool isFileSystem(void);
+ FileSystemLike* fileSystem(void);
+
+ bool isFile(void);
+ FileLike* file(void);
+ bool exists(void);
+
+private:
+ const char* file_name;
+ FileBase* fb;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/FileSystemLike.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/FileSystemLike.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,106 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILESYSTEMLIKE_H
+#define MBED_FILESYSTEMLIKE_H
+
+#include "platform.h"
+
+#include "FileBase.h"
+#include "FileHandle.h"
+#include "DirHandle.h"
+
+namespace mbed {
+
+/** A filesystem-like object is one that can be used to open files
+ * though it by fopen("/name/filename", mode)
+ *
+ * Implementations must define at least open (the default definitions
+ * of the rest of the functions just return error values).
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class FileSystemLike : public FileBase {
+
+public:
+ /** FileSystemLike constructor
+ *
+ * @param name The name to use for the filesystem.
+ */
+ FileSystemLike(const char *name);
+
+ virtual ~FileSystemLike();
+
+ static DirHandle *opendir();
+ friend class BaseDirHandle;
+
+ /** Opens a file from the filesystem
+ *
+ * @param filename The name of the file to open.
+ * @param flags One of O_RDONLY, O_WRONLY, or O_RDWR, OR'd with
+ * zero or more of O_CREAT, O_TRUNC, or O_APPEND.
+ *
+ * @returns
+ * A pointer to a FileHandle object representing the
+ * file on success, or NULL on failure.
+ */
+ virtual FileHandle *open(const char *filename, int flags) = 0;
+
+ /** Remove a file from the filesystem.
+ *
+ * @param filename the name of the file to remove.
+ * @param returns 0 on success, -1 on failure.
+ */
+ virtual int remove(const char *filename) { (void) filename; return -1; };
+
+ /** Rename a file in the filesystem.
+ *
+ * @param oldname the name of the file to rename.
+ * @param newname the name to rename it to.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int rename(const char *oldname, const char *newname) { (void) oldname, (void) newname; return -1; };
+
+ /** Opens a directory in the filesystem and returns a DirHandle
+ * representing the directory stream.
+ *
+ * @param name The name of the directory to open.
+ *
+ * @returns
+ * A DirHandle representing the directory stream, or
+ * NULL on failure.
+ */
+ virtual DirHandle *opendir(const char *name) { (void) name; return NULL; };
+
+ /** Creates a directory in the filesystem.
+ *
+ * @param name The name of the directory to create.
+ * @param mode The permissions to create the directory with.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int mkdir(const char *name, mode_t mode) { (void) name, (void) mode; return -1; }
+
+ // TODO other filesystem functions (mkdir, rm, rn, ls etc)
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/FunctionPointer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/FunctionPointer.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,72 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FUNCTIONPOINTER_H
+#define MBED_FUNCTIONPOINTER_H
+
+#include "Callback.h"
+#include "toolchain.h"
+#include <string.h>
+#include <stdint.h>
+
+namespace mbed {
+
+
+// Declarations for backwards compatibility
+// To be foward compatible, code should adopt the Callback class
+template <typename R, typename A1>
+class FunctionPointerArg1 : public Callback<R(A1)> {
+public:
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "FunctionPointerArg1<R, A> has been replaced by Callback<R(A)>")
+ FunctionPointerArg1(R (*function)(A1) = 0)
+ : Callback<R(A1)>(function) {}
+
+ template<typename T>
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "FunctionPointerArg1<R, A> has been replaced by Callback<R(A)>")
+ FunctionPointerArg1(T *object, R (T::*member)(A1))
+ : Callback<R(A1)>(object, member) {}
+
+ R (*get_function())(A1) {
+ return *reinterpret_cast<R (**)(A1)>(this);
+ }
+};
+
+template <typename R>
+class FunctionPointerArg1<R, void> : public Callback<R()> {
+public:
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "FunctionPointer has been replaced by Callback<void()>")
+ FunctionPointerArg1(R (*function)() = 0)
+ : Callback<R()>(function) {}
+
+ template<typename T>
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "FunctionPointer has been replaced by Callback<void()>")
+ FunctionPointerArg1(T *object, R (T::*member)())
+ : Callback<R()>(object, member) {}
+
+ R (*get_function())() {
+ return *reinterpret_cast<R (**)()>(this);
+ }
+};
+
+typedef FunctionPointerArg1<void, void> FunctionPointer;
+
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/I2C.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/I2C.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,193 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_H
+#define MBED_I2C_H
+
+#include "platform.h"
+
+#if DEVICE_I2C
+
+#include "i2c_api.h"
+#include "SingletonPtr.h"
+#include "PlatformMutex.h"
+
+#if DEVICE_I2C_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#include "FunctionPointer.h"
+#endif
+
+namespace mbed {
+
+/** An I2C Master, used for communicating with I2C slave devices
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * // Read from I2C slave at address 0x62
+ *
+ * #include "mbed.h"
+ *
+ * I2C i2c(p28, p27);
+ *
+ * int main() {
+ * int address = 0x62;
+ * char data[2];
+ * i2c.read(address, data, 2);
+ * }
+ * @endcode
+ */
+class I2C {
+
+public:
+ enum RxStatus {
+ NoData,
+ MasterGeneralCall,
+ MasterWrite,
+ MasterRead
+ };
+
+ enum Acknowledge {
+ NoACK = 0,
+ ACK = 1
+ };
+
+ /** Create an I2C Master interface, connected to the specified pins
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2C(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Read from an I2C slave
+ *
+ * Performs a complete read transaction. The bottom bit of
+ * the address is forced to 1 to indicate a read.
+ *
+ * @param address 8-bit I2C slave address [ addr | 1 ]
+ * @param data Pointer to the byte-array to read data in to
+ * @param length Number of bytes to read
+ * @param repeated Repeated start, true - don't send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int read(int address, char *data, int length, bool repeated = false);
+
+ /** Read a single byte from the I2C bus
+ *
+ * @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
+ *
+ * @returns
+ * the byte read
+ */
+ int read(int ack);
+
+ /** Write to an I2C slave
+ *
+ * Performs a complete write transaction. The bottom bit of
+ * the address is forced to 0 to indicate a write.
+ *
+ * @param address 8-bit I2C slave address [ addr | 0 ]
+ * @param data Pointer to the byte-array data to send
+ * @param length Number of bytes to send
+ * @param repeated Repeated start, true - do not send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int write(int address, const char *data, int length, bool repeated = false);
+
+ /** Write single byte out on the I2C bus
+ *
+ * @param data data to write out on bus
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Creates a start condition on the I2C bus
+ */
+
+ void start(void);
+
+ /** Creates a stop condition on the I2C bus
+ */
+ void stop(void);
+
+ /** Acquire exclusive access to this I2C bus
+ */
+ virtual void lock(void);
+
+ /** Release exclusive access to this I2C bus
+ */
+ virtual void unlock(void);
+
+ virtual ~I2C() {
+ // Do nothing
+ }
+
+#if DEVICE_I2C_ASYNCH
+
+ /** Start non-blocking I2C transfer.
+ *
+ * @param address 8/10 bit I2c slave address
+ * @param tx_buffer The TX buffer with data to be transfered
+ * @param tx_length The length of TX buffer in bytes
+ * @param rx_buffer The RX buffer which is used for received data
+ * @param rx_length The length of RX buffer in bytes
+ * @param event The logical OR of events to modify
+ * @param callback The event callback function
+ * @param repeated Repeated start, true - do not send stop at end
+ * @return Zero if the transfer has started, or -1 if I2C peripheral is busy
+ */
+ int transfer(int address, const char *tx_buffer, int tx_length, char *rx_buffer, int rx_length, const event_callback_t& callback, int event = I2C_EVENT_TRANSFER_COMPLETE, bool repeated = false);
+
+ /** Abort the on-going I2C transfer
+ */
+ void abort_transfer();
+protected:
+ void irq_handler_asynch(void);
+ event_callback_t _callback;
+ CThunk<I2C> _irq;
+ DMAUsage _usage;
+#endif
+
+protected:
+ void aquire();
+
+ i2c_t _i2c;
+ static I2C *_owner;
+ int _hz;
+ static SingletonPtr<PlatformMutex> _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/I2CSlave.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/I2CSlave.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,156 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_SLAVE_H
+#define MBED_I2C_SLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_I2CSLAVE
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Slave, used for communicating with an I2C Master device
+ *
+ * @Note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * // Simple I2C responder
+ * #include <mbed.h>
+ *
+ * I2CSlave slave(p9, p10);
+ *
+ * int main() {
+ * char buf[10];
+ * char msg[] = "Slave!";
+ *
+ * slave.address(0xA0);
+ * while (1) {
+ * int i = slave.receive();
+ * switch (i) {
+ * case I2CSlave::ReadAddressed:
+ * slave.write(msg, strlen(msg) + 1); // Includes null char
+ * break;
+ * case I2CSlave::WriteGeneral:
+ * slave.read(buf, 10);
+ * printf("Read G: %s\n", buf);
+ * break;
+ * case I2CSlave::WriteAddressed:
+ * slave.read(buf, 10);
+ * printf("Read A: %s\n", buf);
+ * break;
+ * }
+ * for(int i = 0; i < 10; i++) buf[i] = 0; // Clear buffer
+ * }
+ * }
+ * @endcode
+ */
+class I2CSlave {
+
+public:
+ enum RxStatus {
+ NoData = 0,
+ ReadAddressed = 1,
+ WriteGeneral = 2,
+ WriteAddressed = 3
+ };
+
+ /** Create an I2C Slave interface, connected to the specified pins.
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2CSlave(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Checks to see if this I2C Slave has been addressed.
+ *
+ * @returns
+ * A status indicating if the device has been addressed, and how
+ * - NoData - the slave has not been addressed
+ * - ReadAddressed - the master has requested a read from this slave
+ * - WriteAddressed - the master is writing to this slave
+ * - WriteGeneral - the master is writing to all slave
+ */
+ int receive(void);
+
+ /** Read from an I2C master.
+ *
+ * @param data pointer to the byte array to read data in to
+ * @param length maximum number of bytes to read
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int read(char *data, int length);
+
+ /** Read a single byte from an I2C master.
+ *
+ * @returns
+ * the byte read
+ */
+ int read(void);
+
+ /** Write to an I2C master.
+ *
+ * @param data pointer to the byte array to be transmitted
+ * @param length the number of bytes to transmite
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int write(const char *data, int length);
+
+ /** Write a single byte to an I2C master.
+ *
+ * @data the byte to write
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Sets the I2C slave address.
+ *
+ * @param address The address to set for the slave (ignoring the least
+ * signifcant bit). If set to 0, the slave will only respond to the
+ * general call address.
+ */
+ void address(int address);
+
+ /** Reset the I2C slave back into the known ready receiving state.
+ */
+ void stop(void);
+
+protected:
+ i2c_t _i2c;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/InterruptIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/InterruptIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,147 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERRUPTIN_H
+#define MBED_INTERRUPTIN_H
+
+#include "platform.h"
+
+#if DEVICE_INTERRUPTIN
+
+#include "gpio_api.h"
+#include "gpio_irq_api.h"
+#include "Callback.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A digital interrupt input, used to call a function on a rising or falling edge
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Flash an LED while waiting for events
+ *
+ * #include "mbed.h"
+ *
+ * InterruptIn event(p16);
+ * DigitalOut led(LED1);
+ *
+ * void trigger() {
+ * printf("triggered!\n");
+ * }
+ *
+ * int main() {
+ * event.rise(&trigger);
+ * while(1) {
+ * led = !led;
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class InterruptIn {
+
+public:
+
+ /** Create an InterruptIn connected to the specified pin
+ *
+ * @param pin InterruptIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ InterruptIn(PinName pin);
+ virtual ~InterruptIn();
+
+ /** Read the input, represented as 0 or 1 (int)
+ *
+ * @returns
+ * An integer representing the state of the input pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read();
+
+ /** An operator shorthand for read()
+ */
+ operator int();
+
+
+ /** Attach a function to call when a rising edge occurs on the input
+ *
+ * @param func A pointer to a void function, or 0 to set as none
+ */
+ void rise(Callback<void()> func);
+
+ /** Attach a member function to call when a rising edge occurs on the input
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ */
+ template<typename T, typename M>
+ void rise(T *obj, M method) {
+ core_util_critical_section_enter();
+ rise(Callback<void()>(obj, method));
+ core_util_critical_section_exit();
+ }
+
+ /** Attach a function to call when a falling edge occurs on the input
+ *
+ * @param func A pointer to a void function, or 0 to set as none
+ */
+ void fall(Callback<void()> func);
+
+ /** Attach a member function to call when a falling edge occurs on the input
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ */
+ template<typename T, typename M>
+ void fall(T *obj, M method) {
+ core_util_critical_section_enter();
+ fall(Callback<void()>(obj, method));
+ core_util_critical_section_exit();
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Enable IRQ. This method depends on hw implementation, might enable one
+ * port interrupts. For further information, check gpio_irq_enable().
+ */
+ void enable_irq();
+
+ /** Disable IRQ. This method depends on hw implementation, might disable one
+ * port interrupts. For further information, check gpio_irq_disable().
+ */
+ void disable_irq();
+
+ static void _irq_handler(uint32_t id, gpio_irq_event event);
+
+protected:
+ gpio_t gpio;
+ gpio_irq_t gpio_irq;
+
+ Callback<void()> _rise;
+ Callback<void()> _fall;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/InterruptManager.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/InterruptManager.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,156 @@
+#ifndef MBED_INTERRUPTMANAGER_H
+#define MBED_INTERRUPTMANAGER_H
+
+#include "cmsis.h"
+#include "CallChain.h"
+#include "PlatformMutex.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Use this singleton if you need to chain interrupt handlers.
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example (for LPC1768):
+ * @code
+ * #include "InterruptManager.h"
+ * #include "mbed.h"
+ *
+ * Ticker flipper;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * void flip(void) {
+ * led1 = !led1;
+ * }
+ *
+ * void handler(void) {
+ * led2 = !led1;
+ * }
+ *
+ * int main() {
+ * led1 = led2 = 0;
+ * flipper.attach(&flip, 1.0);
+ * InterruptManager::get()->add_handler(handler, TIMER3_IRQn);
+ * }
+ * @endcode
+ */
+class InterruptManager {
+public:
+ /** Return the only instance of this class
+ */
+ static InterruptManager* get();
+
+ /** Destroy the current instance of the interrupt manager
+ */
+ static void destroy();
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler(void (*function)(void), IRQn_Type irq) {
+ // Underlying call is thread safe
+ return add_common(function, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler_front(void (*function)(void), IRQn_Type irq) {
+ // Underlying call is thread safe
+ return add_common(function, irq, true);
+ }
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ // Underlying call is thread safe
+ return add_common(tptr, mptr, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler_front(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ // Underlying call is thread safe
+ return add_common(tptr, mptr, irq, true);
+ }
+
+ /** Remove a handler from an interrupt
+ *
+ * @param handler the function object for the handler to remove
+ * @param irq the interrupt number
+ *
+ * @returns
+ * true if the handler was found and removed, false otherwise
+ */
+ bool remove_handler(pFunctionPointer_t handler, IRQn_Type irq);
+
+private:
+ InterruptManager();
+ ~InterruptManager();
+
+ void lock();
+ void unlock();
+
+ // We declare the copy contructor and the assignment operator, but we don't
+ // implement them. This way, if someone tries to copy/assign our instance,
+ // he will get an error at compile time.
+ InterruptManager(const InterruptManager&);
+ InterruptManager& operator =(const InterruptManager&);
+
+ template<typename T>
+ pFunctionPointer_t add_common(T *tptr, void (T::*mptr)(void), IRQn_Type irq, bool front=false) {
+ _mutex.lock();
+ int irq_pos = get_irq_index(irq);
+ bool change = must_replace_vector(irq);
+
+ pFunctionPointer_t pf = front ? _chains[irq_pos]->add_front(tptr, mptr) : _chains[irq_pos]->add(tptr, mptr);
+ if (change)
+ NVIC_SetVector(irq, (uint32_t)&InterruptManager::static_irq_helper);
+ _mutex.unlock();
+ return pf;
+ }
+
+ pFunctionPointer_t add_common(void (*function)(void), IRQn_Type irq, bool front=false);
+ bool must_replace_vector(IRQn_Type irq);
+ int get_irq_index(IRQn_Type irq);
+ void irq_helper();
+ void add_helper(void (*function)(void), IRQn_Type irq, bool front=false);
+ static void static_irq_helper();
+
+ CallChain* _chains[NVIC_NUM_VECTORS];
+ static InterruptManager* _instance;
+ PlatformMutex _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/LocalFileSystem.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/LocalFileSystem.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOCALFILESYSTEM_H
+#define MBED_LOCALFILESYSTEM_H
+
+#include "platform.h"
+
+#if DEVICE_LOCALFILESYSTEM
+
+#include "FileSystemLike.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+FILEHANDLE local_file_open(const char* name, int flags);
+
+class LocalFileHandle : public FileHandle {
+
+public:
+ LocalFileHandle(FILEHANDLE fh);
+
+ virtual int close();
+
+ virtual ssize_t write(const void *buffer, size_t length);
+
+ virtual ssize_t read(void *buffer, size_t length);
+
+ virtual int isatty();
+
+ virtual off_t lseek(off_t position, int whence);
+
+ virtual int fsync();
+
+ virtual off_t flen();
+
+protected:
+ virtual void lock();
+ virtual void unlock();
+ FILEHANDLE _fh;
+ int pos;
+ PlatformMutex _mutex;
+};
+
+/** A filesystem for accessing the local mbed Microcontroller USB disk drive
+ *
+ * This allows programs to read and write files on the same disk drive that is used to program the
+ * mbed Microcontroller. Once created, the standard C file access functions are used to open,
+ * read and write files.
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * LocalFileSystem local("local"); // Create the local filesystem under the name "local"
+ *
+ * int main() {
+ * FILE *fp = fopen("/local/out.txt", "w"); // Open "out.txt" on the local file system for writing
+ * fprintf(fp, "Hello World!");
+ * fclose(fp);
+ * remove("/local/out.txt"); // Removes the file "out.txt" from the local file system
+ *
+ * DIR *d = opendir("/local"); // Opens the root directory of the local file system
+ * struct dirent *p;
+ * while((p = readdir(d)) != NULL) { // Print the names of the files in the local file system
+ * printf("%s\n", p->d_name); // to stdout.
+ * }
+ * closedir(d);
+ * }
+ * @endcode
+ *
+ * @note
+ * If the microcontroller program makes an access to the local drive, it will be marked as "removed"
+ * on the Host computer. This means it is no longer accessible from the Host Computer.
+ *
+ * The drive will only re-appear when the microcontroller program exists. Note that if the program does
+ * not exit, you will need to hold down reset on the mbed Microcontroller to be able to see the drive again!
+ */
+class LocalFileSystem : public FileSystemLike {
+ // No modifiable state
+
+public:
+ LocalFileSystem(const char* n) : FileSystemLike(n) {
+
+ }
+
+ virtual FileHandle *open(const char* name, int flags);
+ virtual int remove(const char *filename);
+ virtual DirHandle *opendir(const char *name);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/LowPowerTicker.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/LowPowerTicker.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTICKER_H
+#define MBED_LOWPOWERTICKER_H
+
+#include "platform.h"
+#include "Ticker.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+
+namespace mbed {
+
+/** Low Power Ticker
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class LowPowerTicker : public Ticker {
+
+public:
+ LowPowerTicker() : Ticker(get_lp_ticker_data()) {
+ }
+
+ virtual ~LowPowerTicker() {
+ }
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/LowPowerTimeout.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/LowPowerTimeout.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTIMEOUT_H
+#define MBED_LOWPOWERTIMEOUT_H
+
+#include "platform.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+#include "LowPowerTicker.h"
+
+namespace mbed {
+
+/** Low Power Timout
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class LowPowerTimeout : public LowPowerTicker {
+
+private:
+ virtual void handler(void) {
+ _function.call();
+ }
+};
+
+}
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/LowPowerTimer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/LowPowerTimer.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTIMER_H
+#define MBED_LOWPOWERTIMER_H
+
+#include "platform.h"
+#include "Timer.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+
+namespace mbed {
+
+/** Low power timer
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class LowPowerTimer : public Timer {
+
+public:
+ LowPowerTimer() : Timer(get_lp_ticker_data()) {
+ }
+
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/PlatformMutex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/PlatformMutex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef PLATFORM_MUTEX_H
+#define PLATFORM_MUTEX_H
+
+#ifdef MBED_CONF_RTOS_PRESENT
+#include "Mutex.h"
+typedef rtos::Mutex PlatformMutex;
+#else
+/** A stub mutex for when an RTOS is not present
+*/
+class PlatformMutex {
+public:
+ PlatformMutex() {
+ // Stub
+
+ }
+ ~PlatformMutex() {
+ // Stub
+ }
+
+ void lock() {
+ // Do nothing
+ }
+
+ void unlock() {
+ // Do nothing
+ }
+};
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/PortIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/PortIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,100 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTIN_H
+#define MBED_PORTIN_H
+
+#include "platform.h"
+
+#if DEVICE_PORTIN
+
+#include "port_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A multiple pin digital input
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Switch on an LED if any of mbed pins 21-26 is high
+ *
+ * #include "mbed.h"
+ *
+ * PortIn p(Port2, 0x0000003F); // p21-p26
+ * DigitalOut ind(LED4);
+ *
+ * int main() {
+ * while(1) {
+ * int pins = p.read();
+ * if(pins) {
+ * ind = 1;
+ * } else {
+ * ind = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class PortIn {
+public:
+
+ /** Create an PortIn, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortIn(PortName port, int mask = 0xFFFFFFFF) {
+ core_util_critical_section_enter();
+ port_init(&_port, port, mask, PIN_INPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ core_util_critical_section_enter();
+ port_mode(&_port, mode);
+ core_util_critical_section_exit();
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/PortInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/PortInOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTINOUT_H
+#define MBED_PORTINOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTINOUT
+
+#include "port_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A multiple pin digital in/out used to set/read multiple bi-directional pins
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class PortInOut {
+public:
+
+ /** Create an PortInOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortInOut(PortName port, int mask = 0xFFFFFFFF) {
+ core_util_critical_section_enter();
+ port_init(&_port, port, mask, PIN_INPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding port pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ core_util_critical_section_enter();
+ port_dir(&_port, PIN_OUTPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ core_util_critical_section_enter();
+ port_dir(&_port, PIN_INPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ core_util_critical_section_enter();
+ port_mode(&_port, mode);
+ core_util_critical_section_exit();
+ }
+
+ /** A shorthand for write()
+ */
+ PortInOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortInOut& operator= (PortInOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/PortOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/PortOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,109 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTOUT_H
+#define MBED_PORTOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTOUT
+
+#include "port_api.h"
+#include "critical.h"
+
+namespace mbed {
+/** A multiple pin digital out
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Toggle all four LEDs
+ *
+ * #include "mbed.h"
+ *
+ * // LED1 = P1.18 LED2 = P1.20 LED3 = P1.21 LED4 = P1.23
+ * #define LED_MASK 0x00B40000
+ *
+ * PortOut ledport(Port1, LED_MASK);
+ *
+ * int main() {
+ * while(1) {
+ * ledport = LED_MASK;
+ * wait(1);
+ * ledport = 0;
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class PortOut {
+public:
+
+ /** Create an PortOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortOut(PortName port, int mask = 0xFFFFFFFF) {
+ core_util_critical_section_enter();
+ port_init(&_port, port, mask, PIN_OUTPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding PortOut pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated PortOut pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** A shorthand for write()
+ */
+ PortOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortOut& operator= (PortOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/PwmOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/PwmOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,181 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_H
+#define MBED_PWMOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PWMOUT
+#include "pwmout_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A pulse-width modulation digital output
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example
+ * @code
+ * // Fade a led on.
+ * #include "mbed.h"
+ *
+ * PwmOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = led + 0.01;
+ * wait(0.2);
+ * if(led == 1.0) {
+ * led = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ *
+ * @note
+ * On the LPC1768 and LPC2368, the PWMs all share the same
+ * period - if you change the period for one, you change it for all.
+ * Although routines that change the period maintain the duty cycle
+ * for its PWM, all other PWMs will require their duty cycle to be
+ * refreshed.
+ */
+class PwmOut {
+
+public:
+
+ /** Create a PwmOut connected to the specified pin
+ *
+ * @param pin PwmOut pin to connect to
+ */
+ PwmOut(PinName pin) {
+ core_util_critical_section_enter();
+ pwmout_init(&_pwm, pin);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the ouput duty-cycle, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output duty-cycle,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ core_util_critical_section_enter();
+ pwmout_write(&_pwm, value);
+ core_util_critical_section_exit();
+ }
+
+ /** Return the current output duty-cycle setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current duty-cycle being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous <write>.
+ */
+ float read() {
+ core_util_critical_section_enter();
+ float val = pwmout_read(&_pwm);
+ core_util_critical_section_exit();
+ return val;
+ }
+
+ /** Set the PWM period, specified in seconds (float), keeping the duty cycle the same.
+ *
+ * @note
+ * The resolution is currently in microseconds; periods smaller than this
+ * will be set to zero.
+ */
+ void period(float seconds) {
+ core_util_critical_section_enter();
+ pwmout_period(&_pwm, seconds);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM period, specified in milli-seconds (int), keeping the duty cycle the same.
+ */
+ void period_ms(int ms) {
+ core_util_critical_section_enter();
+ pwmout_period_ms(&_pwm, ms);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM period, specified in micro-seconds (int), keeping the duty cycle the same.
+ */
+ void period_us(int us) {
+ core_util_critical_section_enter();
+ pwmout_period_us(&_pwm, us);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM pulsewidth, specified in seconds (float), keeping the period the same.
+ */
+ void pulsewidth(float seconds) {
+ core_util_critical_section_enter();
+ pwmout_pulsewidth(&_pwm, seconds);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM pulsewidth, specified in milli-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_ms(int ms) {
+ core_util_critical_section_enter();
+ pwmout_pulsewidth_ms(&_pwm, ms);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM pulsewidth, specified in micro-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_us(int us) {
+ core_util_critical_section_enter();
+ pwmout_pulsewidth_us(&_pwm, us);
+ core_util_critical_section_exit();
+ }
+
+ /** A operator shorthand for write()
+ */
+ PwmOut& operator= (float value) {
+ // Underlying call is thread safe
+ write(value);
+ return *this;
+ }
+
+ PwmOut& operator= (PwmOut& rhs) {
+ // Underlying call is thread safe
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ // Underlying call is thread safe
+ return read();
+ }
+
+protected:
+ pwmout_t _pwm;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/RawSerial.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/RawSerial.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,102 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RAW_SERIAL_H
+#define MBED_RAW_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ * This is a variation of the Serial class that doesn't use streams,
+ * thus making it safe to use in interrupt handlers with the RTOS.
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * @Note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * // Send a char to the PC
+ *
+ * #include "mbed.h"
+ *
+ * RawSerial pc(USBTX, USBRX);
+ *
+ * int main() {
+ * pc.putc('A');
+ * }
+ * @endcode
+ */
+class RawSerial: public SerialBase {
+
+public:
+ /** Create a RawSerial port, connected to the specified transmit and receive pins
+ *
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ *
+ * @note
+ * Either tx or rx may be specified as NC if unused
+ */
+ RawSerial(PinName tx, PinName rx);
+
+ /** Write a char to the serial port
+ *
+ * @param c The char to write
+ *
+ * @returns The written char or -1 if an error occured
+ */
+ int putc(int c);
+
+ /** Read a char from the serial port
+ *
+ * @returns The char read from the serial port
+ */
+ int getc();
+
+ /** Write a string to the serial port
+ *
+ * @param str The string to write
+ *
+ * @returns 0 if the write succeeds, EOF for error
+ */
+ int puts(const char *str);
+
+ int printf(const char *format, ...);
+
+protected:
+
+ /** Acquire exclusive access to this serial port
+ */
+ virtual void lock(void);
+
+ /** Release exclusive access to this serial port
+ */
+ virtual void unlock(void);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/SPI.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/SPI.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,261 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_H
+#define MBED_SPI_H
+
+#include "platform.h"
+
+#if DEVICE_SPI
+
+#include "PlatformMutex.h"
+#include "spi_api.h"
+#include "SingletonPtr.h"
+
+#if DEVICE_SPI_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#include "CircularBuffer.h"
+#include "FunctionPointer.h"
+#include "Transaction.h"
+#endif
+
+namespace mbed {
+
+/** A SPI Master, used for communicating with SPI slave devices
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Most SPI devices will also require Chip Select and Reset signals. These
+ * can be controlled using <DigitalOut> pins
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * // Send a byte to a SPI slave, and record the response
+ *
+ * #include "mbed.h"
+ *
+ * // hardware ssel (where applicable)
+ * //SPI device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * // software ssel
+ * SPI device(p5, p6, p7); // mosi, miso, sclk
+ * DigitalOut cs(p8); // ssel
+ *
+ * int main() {
+ * // hardware ssel (where applicable)
+ * //int response = device.write(0xFF);
+ *
+ * device.lock();
+ * // software ssel
+ * cs = 0;
+ * int response = device.write(0xFF);
+ * cs = 1;
+ * device.unlock();
+ *
+ * }
+ * @endcode
+ */
+class SPI {
+
+public:
+
+ /** Create a SPI master connected to the specified pins
+ *
+ * mosi or miso can be specfied as NC if not used
+ *
+ * @param mosi SPI Master Out, Slave In pin
+ * @param miso SPI Master In, Slave Out pin
+ * @param sclk SPI Clock pin
+ * @param ssel SPI chip select pin
+ */
+ SPI(PinName mosi, PinName miso, PinName sclk, PinName ssel=NC);
+
+ /** Configure the data transmission format
+ *
+ * @param bits Number of bits per SPI frame (4 - 16)
+ * @param mode Clock polarity and phase mode (0 - 3)
+ *
+ * @code
+ * mode | POL PHA
+ * -----+--------
+ * 0 | 0 0
+ * 1 | 0 1
+ * 2 | 1 0
+ * 3 | 1 1
+ * @endcode
+ */
+ void format(int bits, int mode = 0);
+
+ /** Set the spi bus clock frequency
+ *
+ * @param hz SCLK frequency in hz (default = 1MHz)
+ */
+ void frequency(int hz = 1000000);
+
+ /** Write to the SPI Slave and return the response
+ *
+ * @param value Data to be sent to the SPI slave
+ *
+ * @returns
+ * Response from the SPI slave
+ */
+ virtual int write(int value);
+
+ /** Acquire exclusive access to this SPI bus
+ */
+ virtual void lock(void);
+
+ /** Release exclusive access to this SPI bus
+ */
+ virtual void unlock(void);
+
+#if DEVICE_SPI_ASYNCH
+
+ /** Start non-blocking SPI transfer using 8bit buffers.
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer in bytes
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer in bytes
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify. Look at spi hal header file for SPI events.
+ * @return Zero if the transfer has started, or -1 if SPI peripheral is busy
+ */
+ template<typename Type>
+ int transfer(const Type *tx_buffer, int tx_length, Type *rx_buffer, int rx_length, const event_callback_t& callback, int event = SPI_EVENT_COMPLETE) {
+ if (spi_active(&_spi)) {
+ return queue_transfer(tx_buffer, tx_length, rx_buffer, rx_length, sizeof(Type)*8, callback, event);
+ }
+ start_transfer(tx_buffer, tx_length, rx_buffer, rx_length, sizeof(Type)*8, callback, event);
+ return 0;
+ }
+
+ /** Abort the on-going SPI transfer, and continue with transfer's in the queue if any.
+ */
+ void abort_transfer();
+
+ /** Clear the transaction buffer
+ */
+ void clear_transfer_buffer();
+
+ /** Clear the transaction buffer and abort on-going transfer.
+ */
+ void abort_all_transfers();
+
+ /** Configure DMA usage suggestion for non-blocking transfers
+ *
+ * @param usage The usage DMA hint for peripheral
+ * @return Zero if the usage was set, -1 if a transaction is on-going
+ */
+ int set_dma_usage(DMAUsage usage);
+
+protected:
+ /** SPI IRQ handler
+ *
+ */
+ void irq_handler_asynch(void);
+
+ /** Common transfer method
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer in bytes
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer in bytes
+ * @param bit_width The buffers element width
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify
+ * @return Zero if the transfer has started or was added to the queue, or -1 if SPI peripheral is busy/buffer is full
+ */
+ int transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
+
+ /**
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer in bytes
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer in bytes
+ * @param bit_width The buffers element width
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify
+ * @return Zero if a transfer was added to the queue, or -1 if the queue is full
+ */
+ int queue_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
+
+ /** Configures a callback, spi peripheral and initiate a new transfer
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer in bytes
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer in bytes
+ * @param bit_width The buffers element width
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify
+ */
+ void start_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
+
+#if TRANSACTION_QUEUE_SIZE_SPI
+
+ /** Start a new transaction
+ *
+ * @param data Transaction data
+ */
+ void start_transaction(transaction_t *data);
+
+ /** Dequeue a transaction
+ *
+ */
+ void dequeue_transaction();
+ static CircularBuffer<Transaction<SPI>, TRANSACTION_QUEUE_SIZE_SPI> _transaction_buffer;
+#endif
+
+#endif
+
+public:
+ virtual ~SPI() {
+ }
+
+protected:
+ spi_t _spi;
+
+#if DEVICE_SPI_ASYNCH
+ CThunk<SPI> _irq;
+ event_callback_t _callback;
+ DMAUsage _usage;
+#endif
+
+ void aquire(void);
+ static SPI *_owner;
+ static SingletonPtr<PlatformMutex> _mutex;
+ int _bits;
+ int _mode;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/SPISlave.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/SPISlave.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,124 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPISLAVE_H
+#define MBED_SPISLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_SPISLAVE
+
+#include "spi_api.h"
+
+namespace mbed {
+
+/** A SPI slave, used for communicating with a SPI Master device
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * @Note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * // Reply to a SPI master as slave
+ *
+ * #include "mbed.h"
+ *
+ * SPISlave device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * int main() {
+ * device.reply(0x00); // Prime SPI with first reply
+ * while(1) {
+ * if(device.receive()) {
+ * int v = device.read(); // Read byte from master
+ * v = (v + 1) % 0x100; // Add one to it, modulo 256
+ * device.reply(v); // Make this the next reply
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class SPISlave {
+
+public:
+
+ /** Create a SPI slave connected to the specified pins
+ *
+ * mosi or miso can be specfied as NC if not used
+ *
+ * @param mosi SPI Master Out, Slave In pin
+ * @param miso SPI Master In, Slave Out pin
+ * @param sclk SPI Clock pin
+ * @param ssel SPI chip select pin
+ */
+ SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+ /** Configure the data transmission format
+ *
+ * @param bits Number of bits per SPI frame (4 - 16)
+ * @param mode Clock polarity and phase mode (0 - 3)
+ *
+ * @code
+ * mode | POL PHA
+ * -----+--------
+ * 0 | 0 0
+ * 1 | 0 1
+ * 2 | 1 0
+ * 3 | 1 1
+ * @endcode
+ */
+ void format(int bits, int mode = 0);
+
+ /** Set the spi bus clock frequency
+ *
+ * @param hz SCLK frequency in hz (default = 1MHz)
+ */
+ void frequency(int hz = 1000000);
+
+ /** Polls the SPI to see if data has been received
+ *
+ * @returns
+ * 0 if no data,
+ * 1 otherwise
+ */
+ int receive(void);
+
+ /** Retrieve data from receive buffer as slave
+ *
+ * @returns
+ * the data in the receive buffer
+ */
+ int read(void);
+
+ /** Fill the transmission buffer with the value to be written out
+ * as slave on the next received message from the master.
+ *
+ * @param value the data to be transmitted next
+ */
+ void reply(int value);
+
+protected:
+ spi_t _spi;
+
+ int _bits;
+ int _mode;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/Serial.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/Serial.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_H
+#define MBED_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "SerialBase.h"
+#include "PlatformMutex.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * // Print "Hello World" to the PC
+ *
+ * #include "mbed.h"
+ *
+ * Serial pc(USBTX, USBRX);
+ *
+ * int main() {
+ * pc.printf("Hello World\n");
+ * }
+ * @endcode
+ */
+class Serial : public SerialBase, public Stream {
+
+public:
+#if DEVICE_SERIAL_ASYNCH
+ using SerialBase::read;
+ using SerialBase::write;
+#endif
+
+ /** Create a Serial port, connected to the specified transmit and receive pins
+ *
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ *
+ * @note
+ * Either tx or rx may be specified as NC if unused
+ */
+ Serial(PinName tx, PinName rx, const char *name=NULL);
+
+protected:
+ virtual int _getc();
+ virtual int _putc(int c);
+ virtual void lock();
+ virtual void unlock();
+
+ PlatformMutex _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/SerialBase.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/SerialBase.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,245 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIALBASE_H
+#define MBED_SERIALBASE_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "Callback.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#endif
+
+namespace mbed {
+
+/** A base class for serial port implementations
+ * Can't be instantiated directly (use Serial or RawSerial)
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class SerialBase {
+
+public:
+ /** Set the baud rate of the serial port
+ *
+ * @param baudrate The baudrate of the serial port (default = 9600).
+ */
+ void baud(int baudrate);
+
+ enum Parity {
+ None = 0,
+ Odd,
+ Even,
+ Forced1,
+ Forced0
+ };
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq,
+
+ IrqCnt
+ };
+
+ enum Flow {
+ Disabled = 0,
+ RTS,
+ CTS,
+ RTSCTS
+ };
+
+ /** Set the transmission format used by the serial port
+ *
+ * @param bits The number of bits in a word (5-8; default = 8)
+ * @param parity The parity used (SerialBase::None, SerialBase::Odd, SerialBase::Even, SerialBase::Forced1, SerialBase::Forced0; default = SerialBase::None)
+ * @param stop The number of stop bits (1 or 2; default = 1)
+ */
+ void format(int bits=8, Parity parity=SerialBase::None, int stop_bits=1);
+
+ /** Determine if there is a character available to read
+ *
+ * @returns
+ * 1 if there is a character available to read,
+ * 0 otherwise
+ */
+ int readable();
+
+ /** Determine if there is space available to write a character
+ *
+ * @returns
+ * 1 if there is space to write a character,
+ * 0 otherwise
+ */
+ int writeable();
+
+ /** Attach a function to call whenever a serial interrupt is generated
+ *
+ * @param func A pointer to a void function, or 0 to set as none
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ void attach(Callback<void()> func, IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a serial interrupt is generated
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ template<typename T>
+ void attach(T *obj, void (T::*method)(), IrqType type=RxIrq) {
+ attach(Callback<void()>(obj, method), type);
+ }
+
+ /** Attach a member function to call whenever a serial interrupt is generated
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ template<typename T>
+ void attach(T *obj, void (*method)(T*), IrqType type=RxIrq) {
+ attach(Callback<void()>(obj, method), type);
+ }
+
+ /** Generate a break condition on the serial line
+ */
+ void send_break();
+
+protected:
+
+ /** Acquire exclusive access to this serial port
+ */
+ virtual void lock(void);
+
+ /** Release exclusive access to this serial port
+ */
+ virtual void unlock(void);
+
+public:
+
+#if DEVICE_SERIAL_FC
+ /** Set the flow control type on the serial port
+ *
+ * @param type the flow control type (Disabled, RTS, CTS, RTSCTS)
+ * @param flow1 the first flow control pin (RTS for RTS or RTSCTS, CTS for CTS)
+ * @param flow2 the second flow control pin (CTS for RTSCTS)
+ */
+ void set_flow_control(Flow type, PinName flow1=NC, PinName flow2=NC);
+#endif
+
+ static void _irq_handler(uint32_t id, SerialIrq irq_type);
+
+#if DEVICE_SERIAL_ASYNCH
+
+ /** Begin asynchronous write using 8bit buffer. The completition invokes registered TX event callback
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length in bytes
+ * @param callback The event callback function
+ * @param event The logical OR of TX events
+ */
+ int write(const uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
+
+ /** Begin asynchronous write using 16bit buffer. The completition invokes registered TX event callback
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length in bytes
+ * @param callback The event callback function
+ * @param event The logical OR of TX events
+ */
+ int write(const uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
+
+ /** Abort the on-going write transfer
+ */
+ void abort_write();
+
+ /** Begin asynchronous reading using 8bit buffer. The completition invokes registred RX event callback.
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length in bytes
+ * @param callback The event callback function
+ * @param event The logical OR of RX events
+ * @param char_match The matching character
+ */
+ int read(uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
+
+ /** Begin asynchronous reading using 16bit buffer. The completition invokes registred RX event callback.
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length in bytes
+ * @param callback The event callback function
+ * @param event The logical OR of RX events
+ * @param char_match The matching character
+ */
+ int read(uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
+
+ /** Abort the on-going read transfer
+ */
+ void abort_read();
+
+ /** Configure DMA usage suggestion for non-blocking TX transfers
+ *
+ * @param usage The usage DMA hint for peripheral
+ * @return Zero if the usage was set, -1 if a transaction is on-going
+ */
+ int set_dma_usage_tx(DMAUsage usage);
+
+ /** Configure DMA usage suggestion for non-blocking RX transfers
+ *
+ * @param usage The usage DMA hint for peripheral
+ * @return Zero if the usage was set, -1 if a transaction is on-going
+ */
+ int set_dma_usage_rx(DMAUsage usage);
+
+protected:
+ void start_read(void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event, unsigned char char_match);
+ void start_write(const void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event);
+ void interrupt_handler_asynch(void);
+#endif
+
+protected:
+ SerialBase(PinName tx, PinName rx);
+ virtual ~SerialBase() {
+ }
+
+ int _base_getc();
+ int _base_putc(int c);
+
+#if DEVICE_SERIAL_ASYNCH
+ CThunk<SerialBase> _thunk_irq;
+ event_callback_t _tx_callback;
+ event_callback_t _rx_callback;
+ DMAUsage _tx_usage;
+ DMAUsage _rx_usage;
+#endif
+
+ serial_t _serial;
+ Callback<void()> _irq[IrqCnt];
+ int _baud;
+
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/SingletonPtr.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/SingletonPtr.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef SINGLETONPTR_H
+#define SINGLETONPTR_H
+
+#include <stdint.h>
+#include <new>
+#include "mbed_assert.h"
+#ifdef MBED_CONF_RTOS_PRESENT
+#include "cmsis_os.h"
+#endif
+
+#ifdef MBED_CONF_RTOS_PRESENT
+extern osMutexId singleton_mutex_id;
+#endif
+
+/** Lock the singleton mutex
+ *
+ * This function is typically used to provide
+ * exclusive access when initializing a
+ * global object.
+ */
+inline static void singleton_lock(void)
+{
+#ifdef MBED_CONF_RTOS_PRESENT
+ osMutexWait(singleton_mutex_id, osWaitForever);
+#endif
+}
+
+/** Unlock the singleton mutex
+ *
+ * This function is typically used to provide
+ * exclusive access when initializing a
+ * global object.
+ */
+inline static void singleton_unlock(void)
+{
+#ifdef MBED_CONF_RTOS_PRESENT
+ osMutexRelease (singleton_mutex_id);
+#endif
+}
+
+/** Utility class for creating an using a singleton
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * @Note: This class must only be used in a static context -
+ * this class must never be allocated or created on the
+ * stack.
+ *
+ * @Note: This class is lazily initialized on first use.
+ * This class is a POD type so if it is not used it will
+ * be garbage collected.
+ */
+template <class T>
+struct SingletonPtr {
+
+ /** Get a pointer to the underlying singleton
+ *
+ * @returns
+ * A pointer to the singleton
+ */
+ T* get() {
+ if (NULL == _ptr) {
+ singleton_lock();
+ if (NULL == _ptr) {
+ _ptr = new (_data) T();
+ }
+ singleton_unlock();
+ }
+ // _ptr was not zero initialized or was
+ // corrupted if this assert is hit
+ MBED_ASSERT(_ptr == (T *)&_data);
+ return _ptr;
+ }
+
+ /** Get a pointer to the underlying singleton
+ *
+ * @returns
+ * A pointer to the singleton
+ */
+ T* operator->() {
+ return get();
+ }
+
+ // This is zero initialized when in global scope
+ T *_ptr;
+ // Force data to be 4 byte aligned
+ uint32_t _data[(sizeof(T) + sizeof(uint32_t) - 1) / sizeof(uint32_t)];
+};
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/Stream.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/Stream.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,72 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_STREAM_H
+#define MBED_STREAM_H
+
+#include "platform.h"
+#include "FileLike.h"
+#include <cstdarg>
+
+namespace mbed {
+
+extern void mbed_set_unbuffered_stream(FILE *_file);
+extern int mbed_getc(FILE *_file);
+extern char* mbed_gets(char *s, int size, FILE *_file);
+
+/** File stream
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class Stream : public FileLike {
+
+public:
+ Stream(const char *name=NULL);
+ virtual ~Stream();
+
+ int putc(int c);
+ int puts(const char *s);
+ int getc();
+ char *gets(char *s, int size);
+ int printf(const char* format, ...);
+ int scanf(const char* format, ...);
+ int vprintf(const char* format, std::va_list args);
+ int vscanf(const char* format, std::va_list args);
+
+ operator std::FILE*() {return _file;}
+
+protected:
+ virtual int close();
+ virtual ssize_t write(const void* buffer, size_t length);
+ virtual ssize_t read(void* buffer, size_t length);
+ virtual off_t lseek(off_t offset, int whence);
+ virtual int isatty();
+ virtual int fsync();
+ virtual off_t flen();
+
+ virtual int _putc(int c) = 0;
+ virtual int _getc() = 0;
+
+ std::FILE *_file;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ Stream(const Stream&);
+ Stream & operator = (const Stream&);
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/Ticker.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/Ticker.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,129 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TICKER_H
+#define MBED_TICKER_H
+
+#include "TimerEvent.h"
+#include "Callback.h"
+
+namespace mbed {
+
+/** A Ticker is used to call a function at a recurring interval
+ *
+ * You can use as many seperate Ticker objects as you require.
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Toggle the blinking led after 5 seconds
+ *
+ * #include "mbed.h"
+ *
+ * Ticker timer;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * int flip = 0;
+ *
+ * void attime() {
+ * flip = !flip;
+ * }
+ *
+ * int main() {
+ * timer.attach(&attime, 5);
+ * while(1) {
+ * if(flip == 0) {
+ * led1 = !led1;
+ * } else {
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class Ticker : public TimerEvent {
+
+public:
+ Ticker() : TimerEvent() {
+ }
+
+ Ticker(const ticker_data_t *data) : TimerEvent(data) {
+ data->interface->init();
+ }
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param func pointer to the function to be called
+ * @param t the time between calls in seconds
+ */
+ void attach(Callback<void()> func, float t) {
+ attach_us(func, t * 1000000.0f);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param t the time between calls in seconds
+ */
+ template<typename T, typename M>
+ void attach(T *obj, M method, float t) {
+ attach(Callback<void()>(obj, method), t);
+ }
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param fptr pointer to the function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ void attach_us(Callback<void()> func, timestamp_t t) {
+ _function.attach(func);
+ setup(t);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ template<typename T, typename M>
+ void attach_us(T *obj, M method, timestamp_t t) {
+ attach_us(Callback<void()>(obj, method), t);
+ }
+
+ virtual ~Ticker() {
+ detach();
+ }
+
+ /** Detach the function
+ */
+ void detach();
+
+protected:
+ void setup(timestamp_t t);
+ virtual void handler();
+
+protected:
+ timestamp_t _delay; /**< Time delay (in microseconds) for re-setting the multi-shot callback. */
+ Callback<void()> _function; /**< Callback. */
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/Timeout.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/Timeout.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,61 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEOUT_H
+#define MBED_TIMEOUT_H
+
+#include "Ticker.h"
+
+namespace mbed {
+
+/** A Timeout is used to call a function at a point in the future
+ *
+ * You can use as many seperate Timeout objects as you require.
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Blink until timeout.
+ *
+ * #include "mbed.h"
+ *
+ * Timeout timeout;
+ * DigitalOut led(LED1);
+ *
+ * int on = 1;
+ *
+ * void attimeout() {
+ * on = 0;
+ * }
+ *
+ * int main() {
+ * timeout.attach(&attimeout, 5);
+ * while(on) {
+ * led = !led;
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class Timeout : public Ticker {
+
+protected:
+ virtual void handler();
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/Timer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/Timer.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMER_H
+#define MBED_TIMER_H
+
+#include "platform.h"
+#include "ticker_api.h"
+
+namespace mbed {
+
+/** A general purpose timer
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Count the time to toggle a LED
+ *
+ * #include "mbed.h"
+ *
+ * Timer timer;
+ * DigitalOut led(LED1);
+ * int begin, end;
+ *
+ * int main() {
+ * timer.start();
+ * begin = timer.read_us();
+ * led = !led;
+ * end = timer.read_us();
+ * printf("Toggle the led takes %d us", end - begin);
+ * }
+ * @endcode
+ */
+class Timer {
+
+public:
+ Timer();
+ Timer(const ticker_data_t *data);
+
+ /** Start the timer
+ */
+ void start();
+
+ /** Stop the timer
+ */
+ void stop();
+
+ /** Reset the timer to 0.
+ *
+ * If it was already counting, it will continue
+ */
+ void reset();
+
+ /** Get the time passed in seconds
+ */
+ float read();
+
+ /** Get the time passed in mili-seconds
+ */
+ int read_ms();
+
+ /** Get the time passed in micro-seconds
+ */
+ int read_us();
+
+ /** An operator shorthand for read()
+ */
+ operator float();
+
+protected:
+ int slicetime();
+ int _running; // whether the timer is running
+ unsigned int _start; // the start time of the latest slice
+ int _time; // any accumulated time from previous slices
+ const ticker_data_t *_ticker_data;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/TimerEvent.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/TimerEvent.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEREVENT_H
+#define MBED_TIMEREVENT_H
+
+#include "ticker_api.h"
+#include "us_ticker_api.h"
+
+namespace mbed {
+
+/** Base abstraction for timer interrupts
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class TimerEvent {
+public:
+ TimerEvent();
+ TimerEvent(const ticker_data_t *data);
+
+ /** The handler registered with the underlying timer interrupt
+ */
+ static void irq(uint32_t id);
+
+ /** Destruction removes it...
+ */
+ virtual ~TimerEvent();
+
+protected:
+ // The handler called to service the timer event of the derived class
+ virtual void handler() = 0;
+
+ // insert in to linked list
+ void insert(timestamp_t timestamp);
+
+ // remove from linked list, if in it
+ void remove();
+
+ ticker_event_t event;
+
+ const ticker_data_t *_ticker_data;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/Transaction.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/Transaction.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TRANSACTION_H
+#define MBED_TRANSACTION_H
+
+#include "platform.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** Transaction structure
+ */
+typedef struct {
+ void *tx_buffer; /**< Tx buffer */
+ size_t tx_length; /**< Length of Tx buffer*/
+ void *rx_buffer; /**< Rx buffer */
+ size_t rx_length; /**< Length of Rx buffer */
+ uint32_t event; /**< Event for a transaction */
+ event_callback_t callback; /**< User's callback */
+ uint8_t width; /**< Buffer's word width (8, 16, 32, 64) */
+} transaction_t;
+
+/** Transaction class defines a transaction.
+ *
+ * @Note Synchronization level: Not protected
+ */
+template<typename Class>
+class Transaction {
+public:
+ Transaction(Class *tpointer, const transaction_t& transaction) : _obj(tpointer), _data(transaction) {
+ }
+
+ Transaction() : _obj(), _data() {
+ }
+
+ ~Transaction() {
+ }
+
+ /** Get object's instance for the transaction
+ *
+ * @return The object which was stored
+ */
+ Class* get_object() {
+ return _obj;
+ }
+
+ /** Get the transaction
+ *
+ * @return The transaction which was stored
+ */
+ transaction_t* get_transaction() {
+ return &_data;
+ }
+
+private:
+ Class* _obj;
+ transaction_t _data;
+};
+
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/can_helper.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/can_helper.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_HELPER_H
+#define MBED_CAN_HELPER_H
+
+#if DEVICE_CAN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum CANFormat {
+ CANStandard = 0,
+ CANExtended = 1,
+ CANAny = 2
+};
+typedef enum CANFormat CANFormat;
+
+enum CANType {
+ CANData = 0,
+ CANRemote = 1
+};
+typedef enum CANType CANType;
+
+struct CAN_Message {
+ unsigned int id; // 29 bit identifier
+ unsigned char data[8]; // Data field
+ unsigned char len; // Length of data field in bytes
+ CANFormat format; // 0 - STANDARD, 1- EXTENDED IDENTIFIER
+ CANType type; // 0 - DATA FRAME, 1 - REMOTE FRAME
+};
+typedef struct CAN_Message CAN_Message;
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif
+
+#endif // MBED_CAN_HELPER_H
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/critical.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/critical.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,354 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __MBED_UTIL_CRITICAL_H__
+#define __MBED_UTIL_CRITICAL_H__
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stddef.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/** Determine the current interrupts enabled state
+ *
+ * This function can be called to determine whether or not interrupts are currently enabled.
+ * \note
+ * NOTE:
+ * This function works for both cortex-A and cortex-M, although the underlyng implementation
+ * differs.
+ * @return true if interrupts are enabled, false otherwise
+ */
+bool core_util_are_interrupts_enabled(void);
+
+/** Mark the start of a critical section
+ *
+ * This function should be called to mark the start of a critical section of code.
+ * \note
+ * NOTES:
+ * 1) The use of this style of critical section is targetted at C based implementations.
+ * 2) These critical sections can be nested.
+ * 3) The interrupt enable state on entry to the first critical section (of a nested set, or single
+ * section) will be preserved on exit from the section.
+ * 4) This implementation will currently only work on code running in privileged mode.
+ */
+void core_util_critical_section_enter(void);
+
+/** Mark the end of a critical section
+ *
+ * This function should be called to mark the end of a critical section of code.
+ * \note
+ * NOTES:
+ * 1) The use of this style of critical section is targetted at C based implementations.
+ * 2) These critical sections can be nested.
+ * 3) The interrupt enable state on entry to the first critical section (of a nested set, or single
+ * section) will be preserved on exit from the section.
+ * 4) This implementation will currently only work on code running in privileged mode.
+ */
+void core_util_critical_section_exit(void);
+
+/**
+ * Atomic compare and set. It compares the contents of a memory location to a
+ * given value and, only if they are the same, modifies the contents of that
+ * memory location to a given new value. This is done as a single atomic
+ * operation. The atomicity guarantees that the new value is calculated based on
+ * up-to-date information; if the value had been updated by another thread in
+ * the meantime, the write would fail due to a mismatched expectedCurrentValue.
+ *
+ * Refer to https://en.wikipedia.org/wiki/Compare-and-set [which may redirect
+ * you to the article on compare-and swap].
+ *
+ * @param ptr The target memory location.
+ * @param[in,out] expectedCurrentValue A pointer to some location holding the
+ * expected current value of the data being set atomically.
+ * The computed 'desiredValue' should be a function of this current value.
+ * @Note: This is an in-out parameter. In the
+ * failure case of atomic_cas (where the
+ * destination isn't set), the pointee of expectedCurrentValue is
+ * updated with the current value.
+ * @param[in] desiredValue The new value computed based on '*expectedCurrentValue'.
+ *
+ * @return true if the memory location was atomically
+ * updated with the desired value (after verifying
+ * that it contained the expectedCurrentValue),
+ * false otherwise. In the failure case,
+ * exepctedCurrentValue is updated with the new
+ * value of the target memory location.
+ *
+ * pseudocode:
+ * function cas(p : pointer to int, old : pointer to int, new : int) returns bool {
+ * if *p != *old {
+ * *old = *p
+ * return false
+ * }
+ * *p = new
+ * return true
+ * }
+ *
+ * @Note: In the failure case (where the destination isn't set), the value
+ * pointed to by expectedCurrentValue is still updated with the current value.
+ * This property helps writing concise code for the following incr:
+ *
+ * function incr(p : pointer to int, a : int) returns int {
+ * done = false
+ * value = *p // This fetch operation need not be atomic.
+ * while not done {
+ * done = atomic_cas(p, &value, value + a) // *value gets updated automatically until success
+ * }
+ * return value + a
+ * }
+ */
+bool core_util_atomic_cas_u8(uint8_t *ptr, uint8_t *expectedCurrentValue, uint8_t desiredValue);
+
+/**
+ * Atomic compare and set. It compares the contents of a memory location to a
+ * given value and, only if they are the same, modifies the contents of that
+ * memory location to a given new value. This is done as a single atomic
+ * operation. The atomicity guarantees that the new value is calculated based on
+ * up-to-date information; if the value had been updated by another thread in
+ * the meantime, the write would fail due to a mismatched expectedCurrentValue.
+ *
+ * Refer to https://en.wikipedia.org/wiki/Compare-and-set [which may redirect
+ * you to the article on compare-and swap].
+ *
+ * @param ptr The target memory location.
+ * @param[in,out] expectedCurrentValue A pointer to some location holding the
+ * expected current value of the data being set atomically.
+ * The computed 'desiredValue' should be a function of this current value.
+ * @Note: This is an in-out parameter. In the
+ * failure case of atomic_cas (where the
+ * destination isn't set), the pointee of expectedCurrentValue is
+ * updated with the current value.
+ * @param[in] desiredValue The new value computed based on '*expectedCurrentValue'.
+ *
+ * @return true if the memory location was atomically
+ * updated with the desired value (after verifying
+ * that it contained the expectedCurrentValue),
+ * false otherwise. In the failure case,
+ * exepctedCurrentValue is updated with the new
+ * value of the target memory location.
+ *
+ * pseudocode:
+ * function cas(p : pointer to int, old : pointer to int, new : int) returns bool {
+ * if *p != *old {
+ * *old = *p
+ * return false
+ * }
+ * *p = new
+ * return true
+ * }
+ *
+ * @Note: In the failure case (where the destination isn't set), the value
+ * pointed to by expectedCurrentValue is still updated with the current value.
+ * This property helps writing concise code for the following incr:
+ *
+ * function incr(p : pointer to int, a : int) returns int {
+ * done = false
+ * value = *p // This fetch operation need not be atomic.
+ * while not done {
+ * done = atomic_cas(p, &value, value + a) // *value gets updated automatically until success
+ * }
+ * return value + a
+ * }
+ */
+bool core_util_atomic_cas_u16(uint16_t *ptr, uint16_t *expectedCurrentValue, uint16_t desiredValue);
+
+/**
+ * Atomic compare and set. It compares the contents of a memory location to a
+ * given value and, only if they are the same, modifies the contents of that
+ * memory location to a given new value. This is done as a single atomic
+ * operation. The atomicity guarantees that the new value is calculated based on
+ * up-to-date information; if the value had been updated by another thread in
+ * the meantime, the write would fail due to a mismatched expectedCurrentValue.
+ *
+ * Refer to https://en.wikipedia.org/wiki/Compare-and-set [which may redirect
+ * you to the article on compare-and swap].
+ *
+ * @param ptr The target memory location.
+ * @param[in,out] expectedCurrentValue A pointer to some location holding the
+ * expected current value of the data being set atomically.
+ * The computed 'desiredValue' should be a function of this current value.
+ * @Note: This is an in-out parameter. In the
+ * failure case of atomic_cas (where the
+ * destination isn't set), the pointee of expectedCurrentValue is
+ * updated with the current value.
+ * @param[in] desiredValue The new value computed based on '*expectedCurrentValue'.
+ *
+ * @return true if the memory location was atomically
+ * updated with the desired value (after verifying
+ * that it contained the expectedCurrentValue),
+ * false otherwise. In the failure case,
+ * exepctedCurrentValue is updated with the new
+ * value of the target memory location.
+ *
+ * pseudocode:
+ * function cas(p : pointer to int, old : pointer to int, new : int) returns bool {
+ * if *p != *old {
+ * *old = *p
+ * return false
+ * }
+ * *p = new
+ * return true
+ * }
+ *
+ * @Note: In the failure case (where the destination isn't set), the value
+ * pointed to by expectedCurrentValue is still updated with the current value.
+ * This property helps writing concise code for the following incr:
+ *
+ * function incr(p : pointer to int, a : int) returns int {
+ * done = false
+ * value = *p // This fetch operation need not be atomic.
+ * while not done {
+ * done = atomic_cas(p, &value, value + a) // *value gets updated automatically until success
+ * }
+ * return value + a
+ * }
+ */
+bool core_util_atomic_cas_u32(uint32_t *ptr, uint32_t *expectedCurrentValue, uint32_t desiredValue);
+
+/**
+ * Atomic compare and set. It compares the contents of a memory location to a
+ * given value and, only if they are the same, modifies the contents of that
+ * memory location to a given new value. This is done as a single atomic
+ * operation. The atomicity guarantees that the new value is calculated based on
+ * up-to-date information; if the value had been updated by another thread in
+ * the meantime, the write would fail due to a mismatched expectedCurrentValue.
+ *
+ * Refer to https://en.wikipedia.org/wiki/Compare-and-set [which may redirect
+ * you to the article on compare-and swap].
+ *
+ * @param ptr The target memory location.
+ * @param[in,out] expectedCurrentValue A pointer to some location holding the
+ * expected current value of the data being set atomically.
+ * The computed 'desiredValue' should be a function of this current value.
+ * @Note: This is an in-out parameter. In the
+ * failure case of atomic_cas (where the
+ * destination isn't set), the pointee of expectedCurrentValue is
+ * updated with the current value.
+ * @param[in] desiredValue The new value computed based on '*expectedCurrentValue'.
+ *
+ * @return true if the memory location was atomically
+ * updated with the desired value (after verifying
+ * that it contained the expectedCurrentValue),
+ * false otherwise. In the failure case,
+ * exepctedCurrentValue is updated with the new
+ * value of the target memory location.
+ *
+ * pseudocode:
+ * function cas(p : pointer to int, old : pointer to int, new : int) returns bool {
+ * if *p != *old {
+ * *old = *p
+ * return false
+ * }
+ * *p = new
+ * return true
+ * }
+ *
+ * @Note: In the failure case (where the destination isn't set), the value
+ * pointed to by expectedCurrentValue is still updated with the current value.
+ * This property helps writing concise code for the following incr:
+ *
+ * function incr(p : pointer to int, a : int) returns int {
+ * done = false
+ * value = *p // This fetch operation need not be atomic.
+ * while not done {
+ * done = atomic_cas(p, &value, value + a) // *value gets updated automatically until success
+ * }
+ * return value + a
+ * }
+ */
+bool core_util_atomic_cas_ptr(void **ptr, void **expectedCurrentValue, void *desiredValue);
+
+/**
+ * Atomic increment.
+ * @param valuePtr Target memory location being incremented.
+ * @param delta The amount being incremented.
+ * @return The new incremented value.
+ */
+uint8_t core_util_atomic_incr_u8(uint8_t *valuePtr, uint8_t delta);
+
+/**
+ * Atomic increment.
+ * @param valuePtr Target memory location being incremented.
+ * @param delta The amount being incremented.
+ * @return The new incremented value.
+ */
+uint16_t core_util_atomic_incr_u16(uint16_t *valuePtr, uint16_t delta);
+
+/**
+ * Atomic increment.
+ * @param valuePtr Target memory location being incremented.
+ * @param delta The amount being incremented.
+ * @return The new incremented value.
+ */
+uint32_t core_util_atomic_incr_u32(uint32_t *valuePtr, uint32_t delta);
+
+/**
+ * Atomic increment.
+ * @param valuePtr Target memory location being incremented.
+ * @param delta The amount being incremented in bytes.
+ * @return The new incremented value.
+ *
+ * @note The type of the pointer argument is not taken into account
+ * and the pointer is incremented by bytes.
+ */
+void *core_util_atomic_incr_ptr(void **valuePtr, ptrdiff_t delta);
+
+/**
+ * Atomic decrement.
+ * @param valuePtr Target memory location being decremented.
+ * @param delta The amount being decremented.
+ * @return The new decremented value.
+ */
+uint8_t core_util_atomic_decr_u8(uint8_t *valuePtr, uint8_t delta);
+
+/**
+ * Atomic decrement.
+ * @param valuePtr Target memory location being decremented.
+ * @param delta The amount being decremented.
+ * @return The new decremented value.
+ */
+uint16_t core_util_atomic_decr_u16(uint16_t *valuePtr, uint16_t delta);
+
+/**
+ * Atomic decrement.
+ * @param valuePtr Target memory location being decremented.
+ * @param delta The amount being decremented.
+ * @return The new decremented value.
+ */
+uint32_t core_util_atomic_decr_u32(uint32_t *valuePtr, uint32_t delta);
+
+/**
+ * Atomic decrement.
+ * @param valuePtr Target memory location being decremented.
+ * @param delta The amount being decremented in bytes.
+ * @return The new decremented value.
+ *
+ * @note The type of the pointer argument is not taken into account
+ * and the pointer is decremented by bytes
+ */
+void *core_util_atomic_decr_ptr(void **valuePtr, ptrdiff_t delta);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+
+#endif // __MBED_UTIL_CRITICAL_H__
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/mbed.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/api/mbed.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,83 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_H +#define MBED_H + +#define MBED_LIBRARY_VERSION 126 + +#if MBED_CONF_RTOS_PRESENT +#include "rtos/rtos.h" +#endif + +#if MBED_CONF_NSAPI_PRESENT +#include "network-socket/nsapi.h" +#endif + +#include "toolchain.h" +#include "platform.h" + +// Useful C libraries +#include <math.h> +#include <time.h> + +// mbed Debug libraries +#include "mbed_error.h" +#include "mbed_interface.h" +#include "mbed_assert.h" + +// mbed Peripheral components +#include "DigitalIn.h" +#include "DigitalOut.h" +#include "DigitalInOut.h" +#include "BusIn.h" +#include "BusOut.h" +#include "BusInOut.h" +#include "PortIn.h" +#include "PortInOut.h" +#include "PortOut.h" +#include "AnalogIn.h" +#include "AnalogOut.h" +#include "PwmOut.h" +#include "Serial.h" +#include "SPI.h" +#include "SPISlave.h" +#include "I2C.h" +#include "I2CSlave.h" +#include "Ethernet.h" +#include "CAN.h" +#include "RawSerial.h" + +// mbed Internal components +#include "Timer.h" +#include "Ticker.h" +#include "Timeout.h" +#include "LowPowerTimeout.h" +#include "LowPowerTicker.h" +#include "LowPowerTimer.h" +#include "LocalFileSystem.h" +#include "InterruptIn.h" +#include "wait_api.h" +#include "sleep_api.h" +#include "rtc_time.h" + +// mbed Non-hardware components +#include "Callback.h" +#include "FunctionPointer.h" + +using namespace mbed; +using namespace std; + +#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/mbed_assert.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/mbed_assert.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ASSERT_H
+#define MBED_ASSERT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Internal mbed assert function which is invoked when MBED_ASSERT macro failes.
+ * This function is active only if NDEBUG is not defined prior to including this
+ * assert header file.
+ * In case of MBED_ASSERT failing condition, error() is called with the assertation message.
+ * @param expr Expresion to be checked.
+ * @param file File where assertation failed.
+ * @param line Failing assertation line number.
+ */
+void mbed_assert_internal(const char *expr, const char *file, int line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#ifdef NDEBUG
+#define MBED_ASSERT(expr) ((void)0)
+
+#else
+#define MBED_ASSERT(expr) \
+do { \
+ if (!(expr)) { \
+ mbed_assert_internal(#expr, __FILE__, __LINE__); \
+ } \
+} while (0)
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/mbed_debug.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/mbed_debug.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEBUG_H
+#define MBED_DEBUG_H
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#include <stdarg.h>
+
+/** Output a debug message
+ *
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug(const char *format, ...) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+}
+
+/** Conditionally output a debug message
+ *
+ * NOTE: If the condition is constant false (!= 1) and the compiler optimization
+ * level is greater than 0, then the whole function will be compiled away.
+ *
+ * @param condition output only if condition is true (== 1)
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug_if(int condition, const char *format, ...) {
+ if (condition == 1) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+ }
+}
+
+#else
+static inline void debug(const char *format, ...) {}
+static inline void debug_if(int condition, const char *format, ...) {}
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/mbed_error.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/mbed_error.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ERROR_H
+#define MBED_ERROR_H
+
+/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
+ *
+ * @code
+ * #error "That shouldn't have happened!"
+ * @endcode
+ *
+ * If the compiler evaluates this line, it will report the error and stop the compile.
+ *
+ * For example, you could use this to check some user-defined compile-time variables:
+ *
+ * @code
+ * #define NUM_PORTS 7
+ * #if (NUM_PORTS > 4)
+ * #error "NUM_PORTS must be less than 4"
+ * #endif
+ * @endcode
+ *
+ * Reporting Run-Time Errors:
+ * To generate a fatal run-time error, you can use the mbed error() function.
+ *
+ * @code
+ * error("That shouldn't have happened!");
+ * @endcode
+ *
+ * If the mbed running the program executes this function, it will print the
+ * message via the USB serial port, and then die with the blue lights of death!
+ *
+ * The message can use printf-style formatting, so you can report variables in the
+ * message too. For example, you could use this to check a run-time condition:
+ *
+ * @code
+ * if(x >= 5) {
+ * error("expected x to be less than 5, but got %d", x);
+ * }
+ * #endcode
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void error(const char* format, ...);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/mbed_interface.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/mbed_interface.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,130 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERFACE_H
+#define MBED_INTERFACE_H
+
+#include <stdarg.h>
+
+#include "device.h"
+
+/* Mbed interface mac address
+ * if MBED_MAC_ADD_x are zero, interface uid sets mac address,
+ * otherwise MAC_ADD_x are used.
+ */
+#define MBED_MAC_ADDR_INTERFACE 0x00
+#define MBED_MAC_ADDR_0 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_1 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_2 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_3 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_4 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_5 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDRESS_SUM (MBED_MAC_ADDR_0 | MBED_MAC_ADDR_1 | MBED_MAC_ADDR_2 | MBED_MAC_ADDR_3 | MBED_MAC_ADDR_4 | MBED_MAC_ADDR_5)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+/** Functions to control the mbed interface
+ *
+ * mbed Microcontrollers have a built-in interface to provide functionality such as
+ * drag-n-drop download, reset, serial-over-usb, and access to the mbed local file
+ * system. These functions provide means to control the interface suing semihost
+ * calls it supports.
+ */
+
+/** Determine whether the mbed interface is connected, based on whether debug is enabled
+ *
+ * @returns
+ * 1 if interface is connected,
+ * 0 otherwise
+ */
+int mbed_interface_connected(void);
+
+/** Instruct the mbed interface to reset, as if the reset button had been pressed
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise (e.g. interface not present)
+ */
+int mbed_interface_reset(void);
+
+/** This will disconnect the debug aspect of the interface, so semihosting will be disabled.
+ * The interface will still support the USB serial aspect
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_disconnect(void);
+
+/** This will disconnect the debug aspect of the interface, and if the USB cable is not
+ * connected, also power down the interface. If the USB cable is connected, the interface
+ * will remain powered up and visible to the host
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_powerdown(void);
+
+/** This returns a string containing the 32-character UID of the mbed interface
+ * This is a weak function that can be overwritten if required
+ *
+ * @param uid A 33-byte array to write the null terminated 32-byte string
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_uid(char *uid);
+
+#endif
+
+/** This returns a unique 6-byte MAC address, based on the interface UID
+ * If the interface is not present, it returns a default fixed MAC address (00:02:F7:F0:00:00)
+ *
+ * This is a weak function that can be overwritten if you want to provide your own mechanism to
+ * provide a MAC address.
+ *
+ * @param mac A 6-byte array to write the MAC address
+ */
+void mbed_mac_address(char *mac);
+
+/** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence
+ */
+void mbed_die(void);
+
+/** Print out an error message. This is typically called when
+ * hanlding a crash.
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+void mbed_error_printf(const char* format, ...);
+
+/** Print out an error message. Similar to mbed_error_printf
+ * but uses a va_list.
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+void mbed_error_vfprintf(const char * format, va_list arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/mbed_mem_trace.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/mbed_mem_trace.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,138 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __MBED_MEM_TRACE_H__
+#define __MBED_MEM_TRACE_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stddef.h>
+
+/* Operation types for tracer */
+enum {
+ MBED_MEM_TRACE_MALLOC,
+ MBED_MEM_TRACE_REALLOC,
+ MBED_MEM_TRACE_CALLOC,
+ MBED_MEM_TRACE_FREE
+};
+
+/* Prefix for the output of the default tracer */
+#define MBED_MEM_DEFAULT_TRACER_PREFIX "#"
+
+/**
+ * Type of the callback used by the memory tracer. This callback is called when a memory
+ * allocation operation (malloc, realloc, calloc, free) is called and tracing is enabled
+ * for that memory allocation function.
+ *
+ * @param op the ID of the operation (MBED_MEM_TRACE_MALLOC, MBED_MEM_TRACE_REALLOC,
+ * MBED_MEM_TRACE_CALLOC or MBED_MEM_TRACE_FREE).
+ * @param res the result that the memory operation returned (NULL for 'free').
+ * @param caller the caller of the memory operation. Note that the value of 'caller' might be
+ * unreliable.
+ *
+ * The rest of the parameters passed 'mbed_mem_trace_cb_t' are the same as the memory operations
+ * that triggered its call (see 'man malloc' for details):
+ *
+ * - for malloc: cb(MBED_MEM_TRACE_MALLOC, res, caller, size).
+ * - for realloc: cb(MBED_MEM_TRACE_REALLOC, res, caller, ptr, size).
+ * - for calloc: cb(MBED_MEM_TRACE_CALLOC, res, caller, nmemb, size).
+ * - for free: cb(MBED_MEM_TRACE_FREE, NULL, caller, ptr).
+ */
+typedef void (*mbed_mem_trace_cb_t)(uint8_t op, void *res, void* caller, ...);
+
+/**
+ * Set the callback used by the memory tracer (use NULL for disable tracing).
+ *
+ * @param cb the callback to call on each memory operation.
+ */
+void mbed_mem_trace_set_callback(mbed_mem_trace_cb_t cb);
+
+/**
+ * Trace a call to 'malloc'.
+ * @param res the result of running 'malloc'.
+ * @param size the 'size' argument given to 'malloc'.
+ * @param caller the caller of the memory operation.
+ * @return 'res' (the first argument).
+ */
+void *mbed_mem_trace_malloc(void *res, size_t size, void *caller);
+
+/**
+ * Trace a call to 'realloc'.
+ * @param res the result of running 'realloc'.
+ * @param ptr the 'ptr' argument given to 'realloc'.
+ * @param size the 'size' argument given to 'realloc'.
+ *
+ * @return 'res' (the first argument).
+ */
+void *mbed_mem_trace_realloc(void *res, void *ptr, size_t size, void *caller);
+
+/**
+ * Trace a call to 'calloc'.
+ * @param res the result of running 'calloc'.
+ * @param nmemb the 'nmemb' argument given to 'calloc'.
+ * @param size the 'size' argument given to 'calloc'.
+ * @param caller the caller of the memory operation.
+ * @Return 'res' (the first argument).
+ */
+void *mbed_mem_trace_calloc(void *res, size_t num, size_t size, void *caller);
+
+/**
+ * Trace a call to 'free'.
+ * @param ptr the 'ptr' argument given to 'free'.
+ * @param caller the caller of the memory operation.
+ */
+void mbed_mem_trace_free(void *ptr, void *caller);
+
+/**
+ * Default memory trace callback. DO NOT CALL DIRECTLY. It is meant to be used
+ * as the second argument of 'mbed_mem_trace_setup'.
+ *
+ * The default callback outputs trace data using 'printf', in a format that's
+ * easily parsable by an external tool. For each memory operation, the callback
+ * outputs a line that begins with '#<op>:<0xresult>;<0xcaller>-':
+ *
+ * - 'op' identifies the memory operation ('m' for 'malloc', 'r' for 'realloc',
+ * 'c' for 'calloc' and 'f' for 'free').
+ * - 'result' (base 16) is the result of the memor operation. This is always NULL
+ * for 'free', since 'free' doesn't return anything.
+ * -'caller' (base 16) is the caller of the memory operation. Note that the value
+ * of 'caller' might be unreliable.
+ *
+ * The rest of the output depends on the operation being traced:
+ *
+ * - for 'malloc': 'size', where 'size' is the original argument to 'malloc'.
+ * - for 'realloc': '0xptr;size', where 'ptr' (base 16) and 'size' are the original arguments to 'realloc'.
+ * - for 'calloc': 'nmemb;size', where 'nmemb' and 'size' are the original arguments to 'calloc'.
+ * - for 'free': '0xptr', where 'ptr' (base 16) is the original argument to 'free'.
+ *
+ * Examples:
+ *
+ * - '#m:0x20003240;0x600d-50' encodes a 'malloc' that returned 0x20003240, was called
+ * by the instruction at 0x600D with a the 'size' argument equal to 50.
+ * - '#f:0x0;0x602f-0x20003240' encodes a 'free' that was called by the instruction at
+ * 0x602f with the 'ptr' argument equal to 0x20003240.
+ */
+void mbed_mem_trace_default_callback(uint8_t op, void *res, void *caller, ...);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif// #ifndef __MBED_MEM_TRACE_H__
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/mbed_stats.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/mbed_stats.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,40 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_STATS_H
+#define MBED_STATS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ uint32_t current_size; /**< Bytes allocated currently. */
+ uint32_t max_size; /**< Max bytes allocated at a given time. */
+ uint32_t total_size; /**< Cumulative sum of bytes ever allocated. */
+ uint32_t alloc_cnt; /**< Current number of allocations. */
+ uint32_t alloc_fail_cnt; /**< Number of failed allocations. */
+} mbed_stats_heap_t;
+
+/**
+ * Fill the passed in structure with heap stats.
+ */
+void mbed_stats_heap_get(mbed_stats_heap_t *stats);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/platform.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/api/platform.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,28 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PLATFORM_H +#define MBED_PLATFORM_H + +#include "device.h" +#include "PinNames.h" +#include "PeripheralNames.h" + +#include <cstddef> +#include <cstdlib> +#include <cstdio> +#include <cstring> + +#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/rtc_time.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/rtc_time.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,87 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Implementation of the C time.h functions
+ *
+ * Provides mechanisms to set and read the current time, based
+ * on the microcontroller Real-Time Clock (RTC), plus some
+ * standard C manipulation and formating functions.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set RTC time to Wed, 28 Oct 2009 11:35:37
+ *
+ * while(1) {
+ * time_t seconds = time(NULL);
+ *
+ * printf("Time as seconds since January 1, 1970 = %d\n", seconds);
+ *
+ * printf("Time as a basic string = %s", ctime(&seconds));
+ *
+ * char buffer[32];
+ * strftime(buffer, 32, "%I:%M %p\n", localtime(&seconds));
+ * printf("Time as a custom formatted string = %s", buffer);
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+
+/** Set the current time
+ *
+ * Initialises and sets the time of the microcontroller Real-Time Clock (RTC)
+ * to the time represented by the number of seconds since January 1, 1970
+ * (the UNIX timestamp).
+ *
+ * @param t Number of seconds since January 1, 1970 (the UNIX timestamp)
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set time to Wed, 28 Oct 2009 11:35:37
+ * }
+ * @endcode
+ */
+void set_time(time_t t);
+
+/** Attach an external RTC to be used for the C time functions
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * @param read_rtc pointer to function which returns current UNIX timestamp
+ * @param write_rtc pointer to function which sets current UNIX timestamp, can be NULL
+ * @param init_rtc pointer to funtion which initializes RTC, can be NULL
+ * @param isenabled_rtc pointer to function wich returns if the rtc is enabled, can be NULL
+ */
+void attach_rtc(time_t (*read_rtc)(void), void (*write_rtc)(time_t), void (*init_rtc)(void), int (*isenabled_rtc)(void));
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/semihost_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/semihost_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SEMIHOST_H
+#define MBED_SEMIHOST_H
+
+#include "device.h"
+#include "toolchain.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+#ifndef __CC_ARM
+
+#if defined(__ICCARM__)
+static inline int __semihost(int reason, const void *arg) {
+ return __semihosting(reason, (void*)arg);
+}
+#else
+
+#ifdef __thumb__
+# define AngelSWI 0xAB
+# define AngelSWIInsn "bkpt"
+# define AngelSWIAsm bkpt
+#else
+# define AngelSWI 0x123456
+# define AngelSWIInsn "swi"
+# define AngelSWIAsm swi
+#endif
+
+static inline int __semihost(int reason, const void *arg) {
+ int value;
+
+ asm volatile (
+ "mov r0, %1" "\n\t"
+ "mov r1, %2" "\n\t"
+ AngelSWIInsn " %a3" "\n\t"
+ "mov %0, r0"
+ : "=r" (value) /* output operands */
+ : "r" (reason), "r" (arg), "i" (AngelSWI) /* input operands */
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" /* list of clobbered registers */
+ );
+
+ return value;
+}
+#endif
+#endif
+
+#if DEVICE_LOCALFILESYSTEM
+FILEHANDLE semihost_open(const char* name, int openmode);
+int semihost_close (FILEHANDLE fh);
+int semihost_read (FILEHANDLE fh, unsigned char* buffer, unsigned int length, int mode);
+int semihost_write (FILEHANDLE fh, const unsigned char* buffer, unsigned int length, int mode);
+int semihost_ensure(FILEHANDLE fh);
+long semihost_flen (FILEHANDLE fh);
+int semihost_seek (FILEHANDLE fh, long position);
+int semihost_istty (FILEHANDLE fh);
+
+int semihost_remove(const char *name);
+int semihost_rename(const char *old_name, const char *new_name);
+#endif
+
+int semihost_uid(char *uid);
+int semihost_reset(void);
+int semihost_vbus(void);
+int semihost_powerdown(void);
+int semihost_exit(void);
+
+int semihost_connected(void);
+int semihost_disabledebug(void);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/toolchain.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/toolchain.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,289 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TOOLCHAIN_H
+#define MBED_TOOLCHAIN_H
+
+
+// Warning for unsupported compilers
+#if !defined(__GNUC__) /* GCC */ \
+ && !defined(__CC_ARM) /* ARMCC */ \
+ && !defined(__clang__) /* LLVM/Clang */ \
+ && !defined(__ICCARM__) /* IAR */
+#warning "This compiler is not yet supported."
+#endif
+
+
+// Attributes
+
+/** MBED_PACKED
+ * Pack a structure, preventing any padding from being added between fields.
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * MBED_PACKED(struct) foo {
+ * char x;
+ * int y;
+ * };
+ * @endcode
+ */
+#ifndef MBED_PACKED
+#if defined(__ICCARM__)
+#define MBED_PACKED(struct) __packed struct
+#else
+#define MBED_PACKED(struct) struct __attribute__((packed))
+#endif
+#endif
+
+/** MBED_ALIGN(N)
+ * Declare a variable to be aligned on an N-byte boundary.
+ *
+ * @note
+ * IAR does not support alignment greater than word size on the stack
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * MBED_ALIGN(16) char a;
+ * @endcode
+ */
+#ifndef MBED_ALIGN
+#if defined(__ICCARM__)
+#define _MBED_ALIGN(N) _Pragma(#N)
+#define MBED_ALIGN(N) _MBED_ALIGN(data_alignment=N)
+#else
+#define MBED_ALIGN(N) __attribute__((aligned(N)))
+#endif
+#endif
+
+/** MBED_UNUSED
+ * Declare a function argument to be unused, suppressing compiler warnings
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * void foo(MBED_UNUSED int arg) {
+ *
+ * }
+ * @endcode
+ */
+#ifndef MBED_UNUSED
+#if defined(__GNUC__) || defined(__clang__) || defined(__CC_ARM)
+#define MBED_UNUSED __attribute__((__unused__))
+#else
+#define MBED_UNUSED
+#endif
+#endif
+
+/** MBED_WEAK
+ * Mark a function as being weak.
+ *
+ * @note
+ * weak functions are not friendly to making code re-usable, as they can only
+ * be overridden once (and if they are multiply overridden the linker will emit
+ * no warning). You should not normally use weak symbols as part of the API to
+ * re-usable modules.
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * MBED_WEAK void foo() {
+ * // a weak implementation of foo that can be overriden by a definition
+ * // without __weak
+ * }
+ * @endcode
+ */
+#ifndef MBED_WEAK
+#if defined(__ICCARM__)
+#define MBED_WEAK __weak
+#else
+#define MBED_WEAK __attribute__((weak))
+#endif
+#endif
+
+/** MBED_PURE
+ * Hint to the compiler that a function depends only on parameters
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * MBED_PURE int foo(int arg){
+ * // no access to global variables
+ * }
+ * @endcode
+ */
+#ifndef MBED_PURE
+#if defined(__GNUC__) || defined(__clang__) || defined(__CC_ARM)
+#define MBED_PURE __attribute__((const))
+#else
+#define MBED_PURE
+#endif
+#endif
+
+/** MBED_FORCEINLINE
+ * Declare a function that must always be inlined. Failure to inline
+ * such a function will result in an error.
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * MBED_FORCEINLINE void foo() {
+ *
+ * }
+ * @endcode
+ */
+#ifndef MBED_FORCEINLINE
+#if defined(__GNUC__) || defined(__clang__) || defined(__CC_ARM)
+#define MBED_FORCEINLINE static inline __attribute__((always_inline))
+#elif defined(__ICCARM__)
+#define MBED_FORCEINLINE _Pragma("inline=forced") static
+#else
+#define MBED_FORCEINLINE static inline
+#endif
+#endif
+
+/** MBED_NORETURN
+ * Declare a function that will never return.
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * MBED_NORETURN void foo() {
+ * // must never return
+ * while (1) {}
+ * }
+ * @endcode
+ */
+#ifndef MBED_NORETURN
+#if defined(__GNUC__) || defined(__clang__) || defined(__CC_ARM)
+#define MBED_NORETURN __attribute__((noreturn))
+#elif defined(__ICCARM__)
+#define MBED_NORETURN __noreturn
+#else
+#define MBED_NORETURN
+#endif
+#endif
+
+/** MBED_UNREACHABLE
+ * An unreachable statement. If the statement is reached,
+ * behaviour is undefined. Useful in situations where the compiler
+ * cannot deduce the unreachability of code.
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * void foo(int arg) {
+ * switch (arg) {
+ * case 1: return 1;
+ * case 2: return 2;
+ * ...
+ * }
+ * MBED_UNREACHABLE;
+ * }
+ * @endcode
+ */
+#ifndef MBED_UNREACHABLE
+#if (defined(__GNUC__) || defined(__clang__)) && !defined(__CC_ARM)
+#define MBED_UNREACHABLE __builtin_unreachable()
+#else
+#define MBED_UNREACHABLE while (1)
+#endif
+#endif
+
+/** MBED_DEPRECATED("message string")
+ * Mark a function declaration as deprecated, if it used then a warning will be
+ * issued by the compiler possibly including the provided message. Note that not
+ * all compilers are able to display the message.
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * MBED_DEPRECATED("don't foo any more, bar instead")
+ * void foo(int arg);
+ * @endcode
+ */
+#ifndef MBED_DEPRECATED
+#if defined(__GNUC__) || defined(__clang__)
+#define MBED_DEPRECATED(M) __attribute__((deprecated(M)))
+#elif defined(__CC_ARM)
+#define MBED_DEPRECATED(M) __attribute__((deprecated))
+#else
+#define MBED_DEPRECATED(M)
+#endif
+#endif
+
+/** MBED_DEPRECATED_SINCE("version", "message string")
+ * Mark a function declaration as deprecated, noting that the declaration was
+ * deprecated on the specified version. If the function is used then a warning
+ * will be issued by the compiler possibly including the provided message.
+ * Note that not all compilers are able to display this message.
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * MBED_DEPRECATED_SINCE("mbed-os-5.1", "don't foo any more, bar instead")
+ * void foo(int arg);
+ * @endcode
+ */
+#define MBED_DEPRECATED_SINCE(D, M) MBED_DEPRECATED(M " [since " D "]")
+
+/** MBED_CALLER_ADDR()
+ * Returns the caller of the current function.
+ *
+ * @note
+ * This macro is only implemented for GCC and ARMCC.
+ *
+ * @code
+ * #include "toolchain.h"
+ *
+ * printf("This function was called from %p", MBED_CALLER_ADDR());
+ * @endcode
+ *
+ * @return Address of the calling function
+ */
+#ifndef MBED_CALLER_ADDR
+#if (defined(__GNUC__) || defined(__clang__)) && !defined(__CC_ARM)
+#define MBED_CALLER_ADDR() __builtin_extract_return_addr(__builtin_return_address(0))
+#elif defined(__CC_ARM)
+#define MBED_CALLER_ADDR() __builtin_return_address(0)
+#else
+#define MBED_CALLER_ADDR() (NULL)
+#endif
+#endif
+
+// FILEHANDLE declaration
+#if defined(TOOLCHAIN_ARM)
+#include <rt_sys.h>
+#endif
+
+#ifndef FILEHANDLE
+typedef int FILEHANDLE;
+#endif
+
+// Backwards compatibility
+#ifndef WEAK
+#define WEAK MBED_WEAK
+#endif
+
+#ifndef PACKED
+#define PACKED MBED_PACKED()
+#endif
+
+#ifndef EXTERN
+#define EXTERN extern
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/wait_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/wait_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_WAIT_API_H
+#define MBED_WAIT_API_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Generic wait functions.
+ *
+ * These provide simple NOP type wait capabilities.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * DigitalOut heartbeat(LED1);
+ *
+ * int main() {
+ * while (1) {
+ * heartbeat = 1;
+ * wait(0.5);
+ * heartbeat = 0;
+ * wait(0.5);
+ * }
+ * }
+ */
+
+/** Waits for a number of seconds, with microsecond resolution (within
+ * the accuracy of single precision floating point).
+ *
+ * @param s number of seconds to wait
+ */
+void wait(float s);
+
+/** Waits a number of milliseconds.
+ *
+ * @param ms the whole number of milliseconds to wait
+ */
+void wait_ms(int ms);
+
+/** Waits a number of microseconds.
+ *
+ * @param us the whole number of microseconds to wait
+ */
+void wait_us(int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/AnalogIn.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/AnalogIn.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,29 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+
+#include "AnalogIn.h"
+
+#if DEVICE_ANALOGIN
+
+namespace mbed {
+
+SingletonPtr<PlatformMutex> AnalogIn::_mutex;
+
+};
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/BusIn.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/BusIn.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,96 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "BusIn.h"
+#include "mbed_assert.h"
+
+namespace mbed {
+
+BusIn::BusIn(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
+ PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
+
+ // No lock needed in the constructor
+ _nc_mask = 0;
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
+ if (pins[i] != NC) {
+ _nc_mask |= (1 << i);
+ }
+ }
+}
+
+BusIn::BusIn(PinName pins[16]) {
+ // No lock needed in the constructor
+ _nc_mask = 0;
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
+ if (pins[i] != NC) {
+ _nc_mask |= (1 << i);
+ }
+ }
+}
+
+BusIn::~BusIn() {
+ // No lock needed in the destructor
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ delete _pin[i];
+ }
+ }
+}
+
+int BusIn::read() {
+ int v = 0;
+ lock();
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ v |= _pin[i]->read() << i;
+ }
+ }
+ unlock();
+ return v;
+}
+
+void BusIn::mode(PinMode pull) {
+ lock();
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->mode(pull);
+ }
+ }
+ unlock();
+}
+
+void BusIn::lock() {
+ _mutex.lock();
+}
+
+void BusIn::unlock() {
+ _mutex.unlock();
+}
+
+BusIn::operator int() {
+ // Underlying read is thread safe
+ return read();
+}
+
+DigitalIn& BusIn::operator[] (int index) {
+ // No lock needed since _pin is not modified outside the constructor
+ MBED_ASSERT(index >= 0 && index <= 16);
+ MBED_ASSERT(_pin[index]);
+ return *_pin[index];
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/BusInOut.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/BusInOut.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,138 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "BusInOut.h"
+#include "mbed_assert.h"
+
+namespace mbed {
+
+BusInOut::BusInOut(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
+ PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
+
+ // No lock needed in the constructor
+ _nc_mask = 0;
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalInOut(pins[i]) : 0;
+ if (pins[i] != NC) {
+ _nc_mask |= (1 << i);
+ }
+ }
+}
+
+BusInOut::BusInOut(PinName pins[16]) {
+ // No lock needed in the constructor
+ _nc_mask = 0;
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalInOut(pins[i]) : 0;
+ if (pins[i] != NC) {
+ _nc_mask |= (1 << i);
+ }
+ }
+}
+
+BusInOut::~BusInOut() {
+ // No lock needed in the destructor
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ delete _pin[i];
+ }
+ }
+}
+
+void BusInOut::write(int value) {
+ lock();
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->write((value >> i) & 1);
+ }
+ }
+ unlock();
+}
+
+int BusInOut::read() {
+ lock();
+ int v = 0;
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ v |= _pin[i]->read() << i;
+ }
+ }
+ unlock();
+ return v;
+}
+
+void BusInOut::output() {
+ lock();
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->output();
+ }
+ }
+ unlock();
+}
+
+void BusInOut::input() {
+ lock();
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->input();
+ }
+ }
+ unlock();
+}
+
+void BusInOut::mode(PinMode pull) {
+ lock();
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->mode(pull);
+ }
+ }
+ unlock();
+}
+
+BusInOut& BusInOut::operator= (int v) {
+ // Underlying write is thread safe
+ write(v);
+ return *this;
+}
+
+BusInOut& BusInOut::operator= (BusInOut& rhs) {
+ // Underlying read is thread safe
+ write(rhs.read());
+ return *this;
+}
+
+DigitalInOut& BusInOut::operator[] (int index) {
+ // No lock needed since _pin is not modified outside the constructor
+ MBED_ASSERT(index >= 0 && index <= 16);
+ MBED_ASSERT(_pin[index]);
+ return *_pin[index];
+}
+
+BusInOut::operator int() {
+ // Underlying read is thread safe
+ return read();
+}
+
+void BusInOut::lock() {
+ _mutex.lock();
+}
+
+void BusInOut::unlock() {
+ _mutex.unlock();
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/BusOut.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/BusOut.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,108 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "BusOut.h"
+#include "mbed_assert.h"
+
+namespace mbed {
+
+BusOut::BusOut(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
+ PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
+
+ // No lock needed in the constructor
+ _nc_mask = 0;
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalOut(pins[i]) : 0;
+ if (pins[i] != NC) {
+ _nc_mask |= (1 << i);
+ }
+ }
+}
+
+BusOut::BusOut(PinName pins[16]) {
+ // No lock needed in the constructor
+ _nc_mask = 0;
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalOut(pins[i]) : 0;
+ if (pins[i] != NC) {
+ _nc_mask |= (1 << i);
+ }
+ }
+}
+
+BusOut::~BusOut() {
+ // No lock needed in the destructor
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ delete _pin[i];
+ }
+ }
+}
+
+void BusOut::write(int value) {
+ lock();
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->write((value >> i) & 1);
+ }
+ }
+ unlock();
+}
+
+int BusOut::read() {
+ lock();
+ int v = 0;
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ v |= _pin[i]->read() << i;
+ }
+ }
+ unlock();
+ return v;
+}
+
+BusOut& BusOut::operator= (int v) {
+ // Underlying write is thread safe
+ write(v);
+ return *this;
+}
+
+BusOut& BusOut::operator= (BusOut& rhs) {
+ // Underlying write is thread safe
+ write(rhs.read());
+ return *this;
+}
+
+DigitalOut& BusOut::operator[] (int index) {
+ // No lock needed since _pin is not modified outside the constructor
+ MBED_ASSERT(index >= 0 && index <= 16);
+ MBED_ASSERT(_pin[index]);
+ return *_pin[index];
+}
+
+BusOut::operator int() {
+ // Underlying read is thread safe
+ return read();
+}
+
+void BusOut::lock() {
+ _mutex.lock();
+}
+
+void BusOut::unlock() {
+ _mutex.unlock();
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/CAN.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/CAN.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,123 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "CAN.h"
+
+#if DEVICE_CAN
+
+#include "cmsis.h"
+
+namespace mbed {
+
+CAN::CAN(PinName rd, PinName td) : _can(), _irq() {
+ // No lock needed in constructor
+ can_init(&_can, rd, td);
+ can_irq_init(&_can, (&CAN::_irq_handler), (uint32_t)this);
+}
+
+CAN::~CAN() {
+ // No lock needed in destructor
+ can_irq_free(&_can);
+ can_free(&_can);
+}
+
+int CAN::frequency(int f) {
+ lock();
+ int ret = can_frequency(&_can, f);
+ unlock();
+ return ret;
+}
+
+int CAN::write(CANMessage msg) {
+ lock();
+ int ret = can_write(&_can, msg, 0);
+ unlock();
+ return ret;
+}
+
+int CAN::read(CANMessage &msg, int handle) {
+ lock();
+ int ret = can_read(&_can, &msg, handle);
+ unlock();
+ return ret;
+}
+
+void CAN::reset() {
+ lock();
+ can_reset(&_can);
+ unlock();
+}
+
+unsigned char CAN::rderror() {
+ lock();
+ int ret = can_rderror(&_can);
+ unlock();
+ return ret;
+}
+
+unsigned char CAN::tderror() {
+ lock();
+ int ret = can_tderror(&_can);
+ unlock();
+ return ret;
+}
+
+void CAN::monitor(bool silent) {
+ lock();
+ can_monitor(&_can, (silent) ? 1 : 0);
+ unlock();
+}
+
+int CAN::mode(Mode mode) {
+ lock();
+ int ret = can_mode(&_can, (CanMode)mode);
+ unlock();
+ return ret;
+}
+
+int CAN::filter(unsigned int id, unsigned int mask, CANFormat format, int handle) {
+ lock();
+ int ret = can_filter(&_can, id, mask, format, handle);
+ unlock();
+ return ret;
+}
+
+void CAN::attach(Callback<void()> func, IrqType type) {
+ lock();
+ if (func) {
+ _irq[(CanIrqType)type].attach(func);
+ can_irq_set(&_can, (CanIrqType)type, 1);
+ } else {
+ can_irq_set(&_can, (CanIrqType)type, 0);
+ }
+ unlock();
+}
+
+void CAN::_irq_handler(uint32_t id, CanIrqType type) {
+ CAN *handler = (CAN*)id;
+ handler->_irq[type].call();
+}
+
+void CAN::lock() {
+ _mutex.lock();
+}
+
+void CAN::unlock() {
+ _mutex.unlock();
+}
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/CallChain.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/CallChain.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,116 @@
+#include "CallChain.h"
+#include "cmsis.h"
+#include "critical.h"
+
+namespace mbed {
+
+class CallChainLink {
+public:
+ CallChainLink(): cb(), next(NULL) {
+ // No work to do
+ }
+
+ CallChainLink(Callback<void()> &callback): cb(callback), next(NULL) {
+ // No work to do
+ }
+ Callback<void()> cb;
+ CallChainLink * next;
+};
+
+CallChain::CallChain(int size) : _chain(NULL) {
+ // No work to do
+}
+
+CallChain::~CallChain() {
+ clear();
+}
+
+pFunctionPointer_t CallChain::add(Callback<void()> func) {
+ CallChainLink *new_link = new CallChainLink(func);
+ if (NULL == _chain) {
+ _chain = new_link;
+ return &new_link->cb;
+ }
+
+ CallChainLink *link = _chain;
+ while (true) {
+ if (NULL == link->next) {
+ link->next = new_link;
+ return &new_link->cb;
+ }
+ link = link->next;
+ }
+}
+
+pFunctionPointer_t CallChain::add_front(Callback<void()> func) {
+ CallChainLink *link = new CallChainLink(func);
+ link->next = _chain;
+ _chain = link->next;
+ return &link->cb;
+}
+
+int CallChain::size() const {
+ CallChainLink *link = _chain;
+ int elements = 0;
+ while (link != NULL) {
+ elements++;
+ link = link->next;
+ }
+ return elements;
+}
+
+pFunctionPointer_t CallChain::get(int idx) const {
+ CallChainLink *link = _chain;
+ for (int i = 0; i < idx; i++) {
+ if (NULL == link) {
+ break;
+ }
+ link = link->next;
+ }
+ return &link->cb;
+}
+
+int CallChain::find(pFunctionPointer_t f) const {
+ CallChainLink *link = _chain;
+ int i = 0;
+ while (link != NULL) {
+ if (f == &link->cb) {
+ return i;
+ }
+ i++;
+ link = link->next;
+ }
+ return -1;
+}
+
+void CallChain::clear() {
+ CallChainLink *link = _chain;
+ _chain = NULL;
+ while (link != NULL) {
+ CallChainLink *temp = link->next;
+ delete link;
+ link = temp;
+ }
+}
+
+bool CallChain::remove(pFunctionPointer_t f) {
+ CallChainLink *link = _chain;
+ while (link != NULL) {
+ if (f == &link->cb) {
+ delete link;
+ return true;
+ }
+ link = link->next;
+ }
+ return false;
+}
+
+void CallChain::call() {
+ CallChainLink *link = _chain;
+ while (link != NULL) {
+ link->cb.call();
+ link = link->next;
+ }
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/Ethernet.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/Ethernet.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Ethernet.h"
+
+#if DEVICE_ETHERNET
+
+#include "ethernet_api.h"
+
+namespace mbed {
+
+Ethernet::Ethernet() {
+ ethernet_init();
+}
+
+Ethernet::~Ethernet() {
+ ethernet_free();
+}
+
+int Ethernet::write(const char *data, int size) {
+ return ethernet_write(data, size);
+}
+
+int Ethernet::send() {
+ return ethernet_send();
+}
+
+int Ethernet::receive() {
+ return ethernet_receive();
+}
+
+int Ethernet::read(char *data, int size) {
+ return ethernet_read(data, size);
+}
+
+void Ethernet::address(char *mac) {
+ return ethernet_address(mac);
+}
+
+int Ethernet::link() {
+ return ethernet_link();
+}
+
+void Ethernet::set_link(Mode mode) {
+ int speed = -1;
+ int duplex = 0;
+
+ switch(mode) {
+ case AutoNegotiate : speed = -1; duplex = 0; break;
+ case HalfDuplex10 : speed = 0; duplex = 0; break;
+ case FullDuplex10 : speed = 0; duplex = 1; break;
+ case HalfDuplex100 : speed = 1; duplex = 0; break;
+ case FullDuplex100 : speed = 1; duplex = 1; break;
+ }
+
+ ethernet_set_link(speed, duplex);
+}
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/FileBase.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/FileBase.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,97 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FileBase.h"
+
+namespace mbed {
+
+FileBase *FileBase::_head = NULL;
+SingletonPtr<PlatformMutex> FileBase::_mutex;
+
+FileBase::FileBase(const char *name, PathType t) : _next(NULL),
+ _name(name),
+ _path_type(t) {
+ _mutex->lock();
+ if (name != NULL) {
+ // put this object at head of the list
+ _next = _head;
+ _head = this;
+ } else {
+ _next = NULL;
+ }
+ _mutex->unlock();
+}
+
+FileBase::~FileBase() {
+ _mutex->lock();
+ if (_name != NULL) {
+ // remove this object from the list
+ if (_head == this) { // first in the list, so just drop me
+ _head = _next;
+ } else { // find the object before me, then drop me
+ FileBase *p = _head;
+ while (p->_next != this) {
+ p = p->_next;
+ }
+ p->_next = _next;
+ }
+ }
+ _mutex->unlock();
+}
+
+FileBase *FileBase::lookup(const char *name, unsigned int len) {
+ _mutex->lock();
+ FileBase *p = _head;
+ while (p != NULL) {
+ /* Check that p->_name matches name and is the correct length */
+ if (p->_name != NULL && std::strncmp(p->_name, name, len) == 0 && std::strlen(p->_name) == len) {
+ _mutex->unlock();
+ return p;
+ }
+ p = p->_next;
+ }
+ _mutex->unlock();
+ return NULL;
+}
+
+FileBase *FileBase::get(int n) {
+ _mutex->lock();
+ FileBase *p = _head;
+ int m = 0;
+ while (p != NULL) {
+ if (m == n) {
+ _mutex->unlock();
+ return p;
+ }
+
+ m++;
+ p = p->_next;
+ }
+ _mutex->unlock();
+ return NULL;
+}
+
+const char* FileBase::getName(void) {
+ // Constant read so no lock needed
+ return _name;
+}
+
+PathType FileBase::getPathType(void) {
+ // Constant read so no lock needed
+ return _path_type;
+}
+
+} // namespace mbed
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/FileLike.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/FileLike.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,28 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FileLike.h"
+
+namespace mbed {
+
+FileLike::FileLike(const char *name) : FileHandle(), FileBase(name, FilePathType) {
+
+}
+
+FileLike::~FileLike() {
+
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/FilePath.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/FilePath.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FilePath.h"
+
+namespace mbed {
+
+FilePath::FilePath(const char* file_path) : file_name(NULL), fb(NULL) {
+ if ((file_path[0] != '/') || (file_path[1] == 0)) return;
+
+ const char* file_system = &file_path[1];
+ file_name = file_system;
+ int len = 0;
+ while (true) {
+ char c = *file_name;
+ if (c == '/') { // end of object name
+ file_name++; // point to one char after the '/'
+ break;
+ }
+ if (c == 0) { // end of object name, with no filename
+ break;
+ }
+ len++;
+ file_name++;
+ }
+
+ fb = FileBase::lookup(file_system, len);
+}
+
+const char* FilePath::fileName(void) {
+ return file_name;
+}
+
+bool FilePath::isFileSystem(void) {
+ if (NULL == fb)
+ return false;
+ return (fb->getPathType() == FileSystemPathType);
+}
+
+FileSystemLike* FilePath::fileSystem(void) {
+ if (isFileSystem()) {
+ return (FileSystemLike*)fb;
+ }
+ return NULL;
+}
+
+bool FilePath::isFile(void) {
+ if (NULL == fb)
+ return false;
+ return (fb->getPathType() == FilePathType);
+}
+
+FileLike* FilePath::file(void) {
+ if (isFile()) {
+ return (FileLike*)fb;
+ }
+ return NULL;
+}
+
+bool FilePath::exists(void) {
+ return fb != NULL;
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/FileSystemLike.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/FileSystemLike.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,101 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FileSystemLike.h"
+
+namespace mbed {
+
+class BaseDirHandle : public DirHandle {
+public:
+ /*
+ We keep track of our current location as the n'th object in the
+ FileSystemLike list. Using a Base* instead would cause problems if that
+ object were to be destroyed between readdirs.
+ Using this method does mean though that destroying/creating objects can
+ give unusual results from readdir.
+ */
+ off_t n;
+ struct dirent cur_entry;
+
+ BaseDirHandle() : n(0), cur_entry() {
+ }
+
+ virtual int closedir() {
+ // No lock can be used in destructor
+ delete this;
+ return 0;
+ }
+
+ virtual struct dirent *readdir() {
+ lock();
+ FileBase *ptr = FileBase::get(n);
+ if (ptr == NULL) {
+ unlock();
+ return NULL;
+ }
+
+ /* Increment n, so next readdir gets the next item */
+ n++;
+
+ /* Setup cur entry and return a pointer to it */
+ std::strncpy(cur_entry.d_name, ptr->getName(), NAME_MAX);
+ unlock();
+ return &cur_entry;
+ }
+
+ virtual off_t telldir() {
+ lock();
+ off_t offset = n;
+ unlock();
+ return offset;
+ }
+
+ virtual void seekdir(off_t offset) {
+ lock();
+ n = offset;
+ unlock();
+ }
+
+ virtual void rewinddir() {
+ lock();
+ n = 0;
+ unlock();
+ }
+
+protected:
+ PlatformMutex _mutex;
+
+ virtual void lock() {
+ _mutex.lock();
+ }
+
+ virtual void unlock() {
+ _mutex.unlock();
+ }
+};
+
+FileSystemLike::FileSystemLike(const char *name) : FileBase(name, FileSystemPathType) {
+
+}
+
+FileSystemLike::~FileSystemLike() {
+
+}
+
+DirHandle *FileSystemLike::opendir() {
+ return new BaseDirHandle();
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/I2C.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/I2C.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,163 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "I2C.h"
+
+#if DEVICE_I2C
+
+namespace mbed {
+
+I2C *I2C::_owner = NULL;
+SingletonPtr<PlatformMutex> I2C::_mutex;
+
+I2C::I2C(PinName sda, PinName scl) :
+#if DEVICE_I2C_ASYNCH
+ _irq(this), _usage(DMA_USAGE_NEVER),
+#endif
+ _i2c(), _hz(100000) {
+ // No lock needed in the constructor
+
+ // The init function also set the frequency to 100000
+ i2c_init(&_i2c, sda, scl);
+
+ // Used to avoid unnecessary frequency updates
+ _owner = this;
+}
+
+void I2C::frequency(int hz) {
+ lock();
+ _hz = hz;
+
+ // We want to update the frequency even if we are already the bus owners
+ i2c_frequency(&_i2c, _hz);
+
+ // Updating the frequency of the bus we become the owners of it
+ _owner = this;
+ unlock();
+}
+
+void I2C::aquire() {
+ lock();
+ if (_owner != this) {
+ i2c_frequency(&_i2c, _hz);
+ _owner = this;
+ }
+ unlock();
+}
+
+// write - Master Transmitter Mode
+int I2C::write(int address, const char* data, int length, bool repeated) {
+ lock();
+ aquire();
+
+ int stop = (repeated) ? 0 : 1;
+ int written = i2c_write(&_i2c, address, data, length, stop);
+
+ unlock();
+ return length != written;
+}
+
+int I2C::write(int data) {
+ lock();
+ int ret = i2c_byte_write(&_i2c, data);
+ unlock();
+ return ret;
+}
+
+// read - Master Reciever Mode
+int I2C::read(int address, char* data, int length, bool repeated) {
+ lock();
+ aquire();
+
+ int stop = (repeated) ? 0 : 1;
+ int read = i2c_read(&_i2c, address, data, length, stop);
+
+ unlock();
+ return length != read;
+}
+
+int I2C::read(int ack) {
+ lock();
+ int ret;
+ if (ack) {
+ ret = i2c_byte_read(&_i2c, 0);
+ } else {
+ ret = i2c_byte_read(&_i2c, 1);
+ }
+ unlock();
+ return ret;
+}
+
+void I2C::start(void) {
+ lock();
+ i2c_start(&_i2c);
+ unlock();
+}
+
+void I2C::stop(void) {
+ lock();
+ i2c_stop(&_i2c);
+ unlock();
+}
+
+void I2C::lock() {
+ _mutex->lock();
+}
+
+void I2C::unlock() {
+ _mutex->unlock();
+}
+
+#if DEVICE_I2C_ASYNCH
+
+int I2C::transfer(int address, const char *tx_buffer, int tx_length, char *rx_buffer, int rx_length, const event_callback_t& callback, int event, bool repeated)
+{
+ lock();
+ if (i2c_active(&_i2c)) {
+ unlock();
+ return -1; // transaction ongoing
+ }
+ aquire();
+
+ _callback = callback;
+ int stop = (repeated) ? 0 : 1;
+ _irq.callback(&I2C::irq_handler_asynch);
+ i2c_transfer_asynch(&_i2c, (void *)tx_buffer, tx_length, (void *)rx_buffer, rx_length, address, stop, _irq.entry(), event, _usage);
+ unlock();
+ return 0;
+}
+
+void I2C::abort_transfer(void)
+{
+ lock();
+ i2c_abort_asynch(&_i2c);
+ unlock();
+}
+
+void I2C::irq_handler_asynch(void)
+{
+ int event = i2c_irq_handler_asynch(&_i2c);
+ if (_callback && event) {
+ _callback.call(event);
+ }
+
+}
+
+
+#endif
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/I2CSlave.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/I2CSlave.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,63 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "I2CSlave.h"
+
+#if DEVICE_I2CSLAVE
+
+namespace mbed {
+
+I2CSlave::I2CSlave(PinName sda, PinName scl) : _i2c() {
+ i2c_init(&_i2c, sda, scl);
+ i2c_frequency(&_i2c, 100000);
+ i2c_slave_mode(&_i2c, 1);
+}
+
+void I2CSlave::frequency(int hz) {
+ i2c_frequency(&_i2c, hz);
+}
+
+void I2CSlave::address(int address) {
+ int addr = (address & 0xFF) | 1;
+ i2c_slave_address(&_i2c, 0, addr, 0);
+}
+
+int I2CSlave::receive(void) {
+ return i2c_slave_receive(&_i2c);
+}
+
+int I2CSlave::read(char *data, int length) {
+ return i2c_slave_read(&_i2c, data, length) != length;
+}
+
+int I2CSlave::read(void) {
+ return i2c_byte_read(&_i2c, 0);
+}
+
+int I2CSlave::write(const char *data, int length) {
+ return i2c_slave_write(&_i2c, data, length) != length;
+}
+
+int I2CSlave::write(int data) {
+ return i2c_byte_write(&_i2c, data);
+}
+
+void I2CSlave::stop(void) {
+ i2c_stop(&_i2c);
+}
+
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/InterruptIn.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/InterruptIn.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,99 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "InterruptIn.h"
+
+#if DEVICE_INTERRUPTIN
+
+namespace mbed {
+
+InterruptIn::InterruptIn(PinName pin) : gpio(),
+ gpio_irq(),
+ _rise(),
+ _fall() {
+ // No lock needed in the constructor
+ gpio_irq_init(&gpio_irq, pin, (&InterruptIn::_irq_handler), (uint32_t)this);
+ gpio_init_in(&gpio, pin);
+}
+
+InterruptIn::~InterruptIn() {
+ // No lock needed in the destructor
+ gpio_irq_free(&gpio_irq);
+}
+
+int InterruptIn::read() {
+ // Read only
+ return gpio_read(&gpio);
+}
+
+void InterruptIn::mode(PinMode pull) {
+ core_util_critical_section_enter();
+ gpio_mode(&gpio, pull);
+ core_util_critical_section_exit();
+}
+
+void InterruptIn::rise(Callback<void()> func) {
+ core_util_critical_section_enter();
+ if (func) {
+ _rise.attach(func);
+ gpio_irq_set(&gpio_irq, IRQ_RISE, 1);
+ } else {
+ _rise.attach(NULL);
+ gpio_irq_set(&gpio_irq, IRQ_RISE, 0);
+ }
+ core_util_critical_section_exit();
+}
+
+void InterruptIn::fall(Callback<void()> func) {
+ core_util_critical_section_enter();
+ if (func) {
+ _fall.attach(func);
+ gpio_irq_set(&gpio_irq, IRQ_FALL, 1);
+ } else {
+ _fall.attach(NULL);
+ gpio_irq_set(&gpio_irq, IRQ_FALL, 0);
+ }
+ core_util_critical_section_exit();
+}
+
+void InterruptIn::_irq_handler(uint32_t id, gpio_irq_event event) {
+ InterruptIn *handler = (InterruptIn*)id;
+ switch (event) {
+ case IRQ_RISE: handler->_rise.call(); break;
+ case IRQ_FALL: handler->_fall.call(); break;
+ case IRQ_NONE: break;
+ }
+}
+
+void InterruptIn::enable_irq() {
+ core_util_critical_section_enter();
+ gpio_irq_enable(&gpio_irq);
+ core_util_critical_section_exit();
+}
+
+void InterruptIn::disable_irq() {
+ core_util_critical_section_enter();
+ gpio_irq_disable(&gpio_irq);
+ core_util_critical_section_exit();
+}
+
+InterruptIn::operator int() {
+ // Underlying call is atomic
+ return read();
+}
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/InterruptManager.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/InterruptManager.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,122 @@
+#include "cmsis.h"
+#if defined(NVIC_NUM_VECTORS)
+
+#include "InterruptManager.h"
+#include "critical.h"
+#include <string.h>
+
+#define CHAIN_INITIAL_SIZE 4
+
+namespace mbed {
+
+typedef void (*pvoidf)(void);
+
+InterruptManager* InterruptManager::_instance = (InterruptManager*)NULL;
+
+InterruptManager* InterruptManager::get() {
+
+ if (NULL == _instance) {
+ InterruptManager* temp = new InterruptManager();
+
+ // Atomically set _instance
+ core_util_critical_section_enter();
+ if (NULL == _instance) {
+ _instance = temp;
+ }
+ core_util_critical_section_exit();
+
+ // Another thread got there first so delete ours
+ if (temp != _instance) {
+ delete temp;
+ }
+
+ }
+ return _instance;
+}
+
+InterruptManager::InterruptManager() {
+ // No mutex needed in constructor
+ memset(_chains, 0, NVIC_NUM_VECTORS * sizeof(CallChain*));
+}
+
+void InterruptManager::destroy() {
+ // Not a good idea to call this unless NO interrupt at all
+ // is under the control of the handler; otherwise, a system crash
+ // is very likely to occur
+ if (NULL != _instance) {
+ delete _instance;
+ _instance = (InterruptManager*)NULL;
+ }
+}
+
+InterruptManager::~InterruptManager() {
+ for(int i = 0; i < NVIC_NUM_VECTORS; i++)
+ if (NULL != _chains[i])
+ delete _chains[i];
+}
+
+bool InterruptManager::must_replace_vector(IRQn_Type irq) {
+ lock();
+
+ int ret = false;
+ int irq_pos = get_irq_index(irq);
+ if (NULL == _chains[irq_pos]) {
+ _chains[irq_pos] = new CallChain(CHAIN_INITIAL_SIZE);
+ _chains[irq_pos]->add((pvoidf)NVIC_GetVector(irq));
+ ret = true;
+ }
+ unlock();
+ return ret;
+}
+
+pFunctionPointer_t InterruptManager::add_common(void (*function)(void), IRQn_Type irq, bool front) {
+ lock();
+ int irq_pos = get_irq_index(irq);
+ bool change = must_replace_vector(irq);
+
+ pFunctionPointer_t pf = front ? _chains[irq_pos]->add_front(function) : _chains[irq_pos]->add(function);
+ if (change)
+ NVIC_SetVector(irq, (uint32_t)&InterruptManager::static_irq_helper);
+ unlock();
+ return pf;
+}
+
+bool InterruptManager::remove_handler(pFunctionPointer_t handler, IRQn_Type irq) {
+ int irq_pos = get_irq_index(irq);
+ bool ret = false;
+
+ lock();
+ if (_chains[irq_pos] != NULL) {
+ if (_chains[irq_pos]->remove(handler)) {
+ ret = true;
+ }
+ }
+ unlock();
+
+ return ret;
+}
+
+void InterruptManager::irq_helper() {
+ _chains[__get_IPSR()]->call();
+}
+
+int InterruptManager::get_irq_index(IRQn_Type irq) {
+ // Pure function - no lock needed
+ return (int)irq + NVIC_USER_IRQ_OFFSET;
+}
+
+void InterruptManager::static_irq_helper() {
+ InterruptManager::get()->irq_helper();
+}
+
+void InterruptManager::lock() {
+ _mutex.lock();
+}
+
+void InterruptManager::unlock() {
+ _mutex.unlock();
+}
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/LocalFileSystem.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/LocalFileSystem.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,275 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "LocalFileSystem.h"
+
+#if DEVICE_LOCALFILESYSTEM
+
+#include "semihost_api.h"
+#include <string.h>
+#include <stdio.h>
+
+namespace mbed {
+
+/* Extension to FINFO type defined in RTL.h (in Keil RL) - adds 'create time'. */
+typedef struct {
+ unsigned char hr; /* Hours [0..23] */
+ unsigned char min; /* Minutes [0..59] */
+ unsigned char sec; /* Seconds [0..59] */
+ unsigned char day; /* Day [1..31] */
+ unsigned char mon; /* Month [1..12] */
+ unsigned short year; /* Year [1980..2107] */
+} FTIME;
+
+typedef struct { /* File Search info record */
+ char name[32]; /* File name */
+ long size; /* File size in bytes */
+ int fileID; /* System File Identification */
+ FTIME create_time; /* Date & time file was created */
+ FTIME write_time; /* Date & time of last write */
+} XFINFO;
+
+#define RESERVED_FOR_USER_APPLICATIONS (0x100) /* 0x100 - 0x1ff */
+#define USR_XFFIND (RESERVED_FOR_USER_APPLICATIONS + 0)
+
+static int xffind (const char *pattern, XFINFO *info) {
+ unsigned param[4];
+
+ param[0] = (unsigned long)pattern;
+ param[1] = (unsigned long)strlen(pattern);
+ param[2] = (unsigned long)info;
+ param[3] = (unsigned long)sizeof(XFINFO);
+
+ return __semihost(USR_XFFIND, param);
+}
+
+#define OPEN_R 0
+#define OPEN_B 1
+#define OPEN_PLUS 2
+#define OPEN_W 4
+#define OPEN_A 8
+#define OPEN_INVALID -1
+
+int posix_to_semihost_open_flags(int flags) {
+ /* POSIX flags -> semihosting open mode */
+ int openmode;
+ if (flags & O_RDWR) {
+ /* a plus mode */
+ openmode = OPEN_PLUS;
+ if (flags & O_APPEND) {
+ openmode |= OPEN_A;
+ } else if (flags & O_TRUNC) {
+ openmode |= OPEN_W;
+ } else {
+ openmode |= OPEN_R;
+ }
+ } else if (flags & O_WRONLY) {
+ /* write or append */
+ if (flags & O_APPEND) {
+ openmode = OPEN_A;
+ } else {
+ openmode = OPEN_W;
+ }
+ } else if (flags == O_RDONLY) {
+ /* read mode */
+ openmode = OPEN_R;
+ } else {
+ /* invalid flags */
+ openmode = OPEN_INVALID;
+ }
+
+ return openmode;
+}
+
+FILEHANDLE local_file_open(const char* name, int flags) {
+ int openmode = posix_to_semihost_open_flags(flags);
+ if (openmode == OPEN_INVALID) {
+ return (FILEHANDLE)NULL;
+ }
+
+ FILEHANDLE fh = semihost_open(name, openmode);
+ if (fh == -1) {
+ return (FILEHANDLE)NULL;
+ }
+
+ return fh;
+}
+
+LocalFileHandle::LocalFileHandle(FILEHANDLE fh) : _fh(fh), pos(0) {
+ // No lock needed in constructor
+}
+
+int LocalFileHandle::close() {
+ int retval = semihost_close(_fh);
+ delete this;
+ return retval;
+}
+
+ssize_t LocalFileHandle::write(const void *buffer, size_t length) {
+ lock();
+ ssize_t n = semihost_write(_fh, (const unsigned char*)buffer, length, 0); // number of characters not written
+ n = length - n; // number of characters written
+ pos += n;
+ unlock();
+ return n;
+}
+
+ssize_t LocalFileHandle::read(void *buffer, size_t length) {
+ lock();
+ ssize_t n = semihost_read(_fh, (unsigned char*)buffer, length, 0); // number of characters not read
+ n = length - n; // number of characters read
+ pos += n;
+ unlock();
+ return n;
+}
+
+int LocalFileHandle::isatty() {
+ lock();
+ int ret = semihost_istty(_fh);
+ unlock();
+ return ret;
+}
+
+off_t LocalFileHandle::lseek(off_t position, int whence) {
+ lock();
+ if (whence == SEEK_CUR) {
+ position += pos;
+ } else if (whence == SEEK_END) {
+ position += semihost_flen(_fh);
+ } /* otherwise SEEK_SET, so position is fine */
+
+ /* Always seems to return -1, so just ignore for now. */
+ semihost_seek(_fh, position);
+ pos = position;
+ unlock();
+ return position;
+}
+
+int LocalFileHandle::fsync() {
+ lock();
+ int ret = semihost_ensure(_fh);
+ unlock();
+ return ret;
+}
+
+off_t LocalFileHandle::flen() {
+ lock();
+ off_t off = semihost_flen(_fh);
+ unlock();
+ return off;
+}
+
+void LocalFileHandle::lock() {
+ _mutex.lock();
+}
+
+void LocalFileHandle::unlock() {
+ _mutex.unlock();
+}
+
+class LocalDirHandle : public DirHandle {
+
+public:
+ struct dirent cur_entry;
+ XFINFO info;
+
+ LocalDirHandle() : cur_entry(), info() {
+ }
+
+ virtual int closedir() {
+ // No lock can be used in destructor
+ delete this;
+ return 0;
+ }
+
+ virtual struct dirent *readdir() {
+ lock();
+ if (xffind("*", &info)!=0) {
+ unlock();
+ return NULL;
+ }
+ memcpy(cur_entry.d_name, info.name, sizeof(info.name));
+ unlock();
+ return &cur_entry;
+ }
+
+ virtual void rewinddir() {
+ lock();
+ info.fileID = 0;
+ unlock();
+ }
+
+ virtual off_t telldir() {
+ lock();
+ int fileId = info.fileID;
+ unlock();
+ return fileId;
+ }
+
+ virtual void seekdir(off_t offset) {
+ lock();
+ info.fileID = offset;
+ unlock();
+ }
+
+protected:
+ PlatformMutex _mutex;
+
+ virtual void lock() {
+ _mutex.lock();
+ }
+
+ virtual void unlock() {
+ _mutex.unlock();
+ }
+};
+
+FileHandle *LocalFileSystem::open(const char* name, int flags) {
+ // No global state modified so function is thread safe
+
+ /* reject filenames with / in them */
+ for (const char *tmp = name; *tmp; tmp++) {
+ if (*tmp == '/') {
+ return NULL;
+ }
+ }
+
+ int openmode = posix_to_semihost_open_flags(flags);
+ if (openmode == OPEN_INVALID) {
+ return NULL;
+ }
+
+ FILEHANDLE fh = semihost_open(name, openmode);
+ if (fh == -1) {
+ return NULL;
+ }
+ return new LocalFileHandle(fh);
+}
+
+int LocalFileSystem::remove(const char *filename) {
+ // No global state modified so function is thread safe
+
+ return semihost_remove(filename);
+}
+
+DirHandle *LocalFileSystem::opendir(const char *name) {
+ // No global state modified so function is thread safe
+
+ return new LocalDirHandle();
+}
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/RawSerial.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/RawSerial.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "RawSerial.h"
+#include "wait_api.h"
+#include <cstdarg>
+
+#if DEVICE_SERIAL
+
+#define STRING_STACK_LIMIT 120
+
+namespace mbed {
+
+RawSerial::RawSerial(PinName tx, PinName rx) : SerialBase(tx, rx) {
+ // No lock needed in the constructor
+}
+
+int RawSerial::getc() {
+ lock();
+ int ret = _base_getc();
+ unlock();
+ return ret;
+}
+
+int RawSerial::putc(int c) {
+ lock();
+ int ret = _base_putc(c);
+ unlock();
+ return ret;
+}
+
+int RawSerial::puts(const char *str) {
+ lock();
+ while (*str)
+ putc(*str ++);
+ unlock();
+ return 0;
+}
+
+// Experimental support for printf in RawSerial. No Stream inheritance
+// means we can't call printf() directly, so we use sprintf() instead.
+// We only call malloc() for the sprintf() buffer if the buffer
+// length is above a certain threshold, otherwise we use just the stack.
+int RawSerial::printf(const char *format, ...) {
+ lock();
+ std::va_list arg;
+ va_start(arg, format);
+ // ARMCC microlib does not properly handle a size of 0.
+ // As a workaround supply a dummy buffer with a size of 1.
+ char dummy_buf[1];
+ int len = vsnprintf(dummy_buf, sizeof(dummy_buf), format, arg);
+ if (len < STRING_STACK_LIMIT) {
+ char temp[STRING_STACK_LIMIT];
+ vsprintf(temp, format, arg);
+ puts(temp);
+ } else {
+ char *temp = new char[len + 1];
+ vsprintf(temp, format, arg);
+ puts(temp);
+ delete[] temp;
+ }
+ va_end(arg);
+ unlock();
+ return len;
+}
+
+/** Acquire exclusive access to this serial port
+ */
+void RawSerial::lock() {
+ // No lock used - external synchronization required
+}
+
+/** Release exclusive access to this serial port
+ */
+void RawSerial::unlock() {
+ // No lock used - external synchronization required
+}
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/SPI.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/SPI.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,205 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "SPI.h"
+#include "critical.h"
+
+#if DEVICE_SPI
+
+namespace mbed {
+
+#if DEVICE_SPI_ASYNCH && TRANSACTION_QUEUE_SIZE_SPI
+CircularBuffer<Transaction<SPI>, TRANSACTION_QUEUE_SIZE_SPI> SPI::_transaction_buffer;
+#endif
+
+SPI::SPI(PinName mosi, PinName miso, PinName sclk, PinName ssel) :
+ _spi(),
+#if DEVICE_SPI_ASYNCH
+ _irq(this),
+ _usage(DMA_USAGE_NEVER),
+#endif
+ _bits(8),
+ _mode(0),
+ _hz(1000000) {
+ // No lock needed in the constructor
+
+ spi_init(&_spi, mosi, miso, sclk, ssel);
+ aquire();
+}
+
+void SPI::format(int bits, int mode) {
+ lock();
+ _bits = bits;
+ _mode = mode;
+ SPI::_owner = NULL; // Not that elegant, but works. rmeyer
+ aquire();
+ unlock();
+}
+
+void SPI::frequency(int hz) {
+ lock();
+ _hz = hz;
+ SPI::_owner = NULL; // Not that elegant, but works. rmeyer
+ aquire();
+ unlock();
+}
+
+SPI* SPI::_owner = NULL;
+SingletonPtr<PlatformMutex> SPI::_mutex;
+
+// ignore the fact there are multiple physical spis, and always update if it wasnt us last
+void SPI::aquire() {
+ lock();
+ if (_owner != this) {
+ spi_format(&_spi, _bits, _mode, 0);
+ spi_frequency(&_spi, _hz);
+ _owner = this;
+ }
+ unlock();
+}
+
+int SPI::write(int value) {
+ lock();
+ aquire();
+ int ret = spi_master_write(&_spi, value);
+ unlock();
+ return ret;
+}
+
+void SPI::lock() {
+ _mutex->lock();
+}
+
+void SPI::unlock() {
+ _mutex->unlock();
+}
+
+#if DEVICE_SPI_ASYNCH
+
+int SPI::transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event)
+{
+ if (spi_active(&_spi)) {
+ return queue_transfer(tx_buffer, tx_length, rx_buffer, rx_length, bit_width, callback, event);
+ }
+ start_transfer(tx_buffer, tx_length, rx_buffer, rx_length, bit_width, callback, event);
+ return 0;
+}
+
+void SPI::abort_transfer()
+{
+ spi_abort_asynch(&_spi);
+#if TRANSACTION_QUEUE_SIZE_SPI
+ dequeue_transaction();
+#endif
+}
+
+
+void SPI::clear_transfer_buffer()
+{
+#if TRANSACTION_QUEUE_SIZE_SPI
+ _transaction_buffer.reset();
+#endif
+}
+
+void SPI::abort_all_transfers()
+{
+ clear_transfer_buffer();
+ abort_transfer();
+}
+
+int SPI::set_dma_usage(DMAUsage usage)
+{
+ if (spi_active(&_spi)) {
+ return -1;
+ }
+ _usage = usage;
+ return 0;
+}
+
+int SPI::queue_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event)
+{
+#if TRANSACTION_QUEUE_SIZE_SPI
+ transaction_t t;
+
+ t.tx_buffer = const_cast<void *>(tx_buffer);
+ t.tx_length = tx_length;
+ t.rx_buffer = rx_buffer;
+ t.rx_length = rx_length;
+ t.event = event;
+ t.callback = callback;
+ t.width = bit_width;
+ Transaction<SPI> transaction(this, t);
+ if (_transaction_buffer.full()) {
+ return -1; // the buffer is full
+ } else {
+ core_util_critical_section_enter();
+ _transaction_buffer.push(transaction);
+ if (!spi_active(&_spi)) {
+ dequeue_transaction();
+ }
+ core_util_critical_section_exit();
+ return 0;
+ }
+#else
+ return -1;
+#endif
+}
+
+void SPI::start_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event)
+{
+ aquire();
+ _callback = callback;
+ _irq.callback(&SPI::irq_handler_asynch);
+ spi_master_transfer(&_spi, tx_buffer, tx_length, rx_buffer, rx_length, bit_width, _irq.entry(), event , _usage);
+}
+
+#if TRANSACTION_QUEUE_SIZE_SPI
+
+void SPI::start_transaction(transaction_t *data)
+{
+ start_transfer(data->tx_buffer, data->tx_length, data->rx_buffer, data->rx_length, data->width, data->callback, data->event);
+}
+
+void SPI::dequeue_transaction()
+{
+ Transaction<SPI> t;
+ if (_transaction_buffer.pop(t)) {
+ SPI* obj = t.get_object();
+ transaction_t* data = t.get_transaction();
+ obj->start_transaction(data);
+ }
+}
+
+#endif
+
+void SPI::irq_handler_asynch(void)
+{
+ int event = spi_irq_handler_asynch(&_spi);
+ if (_callback && (event & SPI_EVENT_ALL)) {
+ _callback.call(event & SPI_EVENT_ALL);
+ }
+#if TRANSACTION_QUEUE_SIZE_SPI
+ if (event & (SPI_EVENT_ALL | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE)) {
+ // SPI peripheral is free (event happend), dequeue transaction
+ dequeue_transaction();
+ }
+#endif
+}
+
+#endif
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/SPISlave.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/SPISlave.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "SPISlave.h"
+
+#if DEVICE_SPISLAVE
+
+namespace mbed {
+
+SPISlave::SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel) :
+ _spi(),
+ _bits(8),
+ _mode(0),
+ _hz(1000000)
+ {
+ spi_init(&_spi, mosi, miso, sclk, ssel);
+ spi_format(&_spi, _bits, _mode, 1);
+ spi_frequency(&_spi, _hz);
+}
+
+void SPISlave::format(int bits, int mode) {
+ _bits = bits;
+ _mode = mode;
+ spi_format(&_spi, _bits, _mode, 1);
+}
+
+void SPISlave::frequency(int hz) {
+ _hz = hz;
+ spi_frequency(&_spi, _hz);
+}
+
+int SPISlave::receive(void) {
+ return(spi_slave_receive(&_spi));
+}
+
+int SPISlave::read(void) {
+ return(spi_slave_read(&_spi));
+}
+
+void SPISlave::reply(int value) {
+ spi_slave_write(&_spi, value);
+}
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/Serial.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/Serial.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Serial.h"
+#include "wait_api.h"
+
+#if DEVICE_SERIAL
+
+namespace mbed {
+
+Serial::Serial(PinName tx, PinName rx, const char *name) : SerialBase(tx, rx), Stream(name) {
+}
+
+int Serial::_getc() {
+ // Mutex is already held
+ return _base_getc();
+}
+
+int Serial::_putc(int c) {
+ // Mutex is already held
+ return _base_putc(c);
+}
+
+void Serial::lock() {
+ _mutex.lock();
+}
+
+void Serial::unlock() {
+ _mutex.unlock();
+}
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/SerialBase.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/SerialBase.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,244 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "SerialBase.h"
+#include "wait_api.h"
+#include "critical.h"
+
+#if DEVICE_SERIAL
+
+namespace mbed {
+
+SerialBase::SerialBase(PinName tx, PinName rx) :
+#if DEVICE_SERIAL_ASYNCH
+ _thunk_irq(this), _tx_usage(DMA_USAGE_NEVER),
+ _rx_usage(DMA_USAGE_NEVER),
+#endif
+ _serial(), _baud(9600) {
+ // No lock needed in the constructor
+
+ serial_init(&_serial, tx, rx);
+ serial_irq_handler(&_serial, SerialBase::_irq_handler, (uint32_t)this);
+}
+
+void SerialBase::baud(int baudrate) {
+ lock();
+ serial_baud(&_serial, baudrate);
+ _baud = baudrate;
+ unlock();
+}
+
+void SerialBase::format(int bits, Parity parity, int stop_bits) {
+ lock();
+ serial_format(&_serial, bits, (SerialParity)parity, stop_bits);
+ unlock();
+}
+
+int SerialBase::readable() {
+ lock();
+ int ret = serial_readable(&_serial);
+ unlock();
+ return ret;
+}
+
+
+int SerialBase::writeable() {
+ lock();
+ int ret = serial_writable(&_serial);
+ unlock();
+ return ret;
+}
+
+void SerialBase::attach(Callback<void()> func, IrqType type) {
+ lock();
+ // Disable interrupts when attaching interrupt handler
+ core_util_critical_section_enter();
+ if (func) {
+ _irq[type].attach(func);
+ serial_irq_set(&_serial, (SerialIrq)type, 1);
+ } else {
+ serial_irq_set(&_serial, (SerialIrq)type, 0);
+ }
+ core_util_critical_section_exit();
+ unlock();
+}
+
+void SerialBase::_irq_handler(uint32_t id, SerialIrq irq_type) {
+ SerialBase *handler = (SerialBase*)id;
+ handler->_irq[irq_type].call();
+}
+
+int SerialBase::_base_getc() {
+ // Mutex is already held
+ return serial_getc(&_serial);
+}
+
+int SerialBase::_base_putc(int c) {
+ // Mutex is already held
+ serial_putc(&_serial, c);
+ return c;
+}
+
+void SerialBase::send_break() {
+ lock();
+ // Wait for 1.5 frames before clearing the break condition
+ // This will have different effects on our platforms, but should
+ // ensure that we keep the break active for at least one frame.
+ // We consider a full frame (1 start bit + 8 data bits bits +
+ // 1 parity bit + 2 stop bits = 12 bits) for computation.
+ // One bit time (in us) = 1000000/_baud
+ // Twelve bits: 12000000/baud delay
+ // 1.5 frames: 18000000/baud delay
+ serial_break_set(&_serial);
+ wait_us(18000000/_baud);
+ serial_break_clear(&_serial);
+ unlock();
+}
+
+void SerialBase::lock() {
+ // Stub
+}
+
+void SerialBase:: unlock() {
+ // Stub
+}
+
+#if DEVICE_SERIAL_FC
+void SerialBase::set_flow_control(Flow type, PinName flow1, PinName flow2) {
+ lock();
+ FlowControl flow_type = (FlowControl)type;
+ switch(type) {
+ case RTS:
+ serial_set_flow_control(&_serial, flow_type, flow1, NC);
+ break;
+
+ case CTS:
+ serial_set_flow_control(&_serial, flow_type, NC, flow1);
+ break;
+
+ case RTSCTS:
+ case Disabled:
+ serial_set_flow_control(&_serial, flow_type, flow1, flow2);
+ break;
+
+ default:
+ break;
+ }
+ unlock();
+}
+#endif
+
+#if DEVICE_SERIAL_ASYNCH
+
+int SerialBase::write(const uint8_t *buffer, int length, const event_callback_t& callback, int event)
+{
+ if (serial_tx_active(&_serial)) {
+ return -1; // transaction ongoing
+ }
+ start_write((void *)buffer, length, 8, callback, event);
+ return 0;
+}
+
+int SerialBase::write(const uint16_t *buffer, int length, const event_callback_t& callback, int event)
+{
+ if (serial_tx_active(&_serial)) {
+ return -1; // transaction ongoing
+ }
+ start_write((void *)buffer, length, 16, callback, event);
+ return 0;
+}
+
+void SerialBase::start_write(const void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event)
+{
+ _tx_callback = callback;
+
+ _thunk_irq.callback(&SerialBase::interrupt_handler_asynch);
+ serial_tx_asynch(&_serial, buffer, buffer_size, buffer_width, _thunk_irq.entry(), event, _tx_usage);
+}
+
+void SerialBase::abort_write(void)
+{
+ serial_tx_abort_asynch(&_serial);
+}
+
+void SerialBase::abort_read(void)
+{
+ serial_rx_abort_asynch(&_serial);
+}
+
+int SerialBase::set_dma_usage_tx(DMAUsage usage)
+{
+ if (serial_tx_active(&_serial)) {
+ return -1;
+ }
+ _tx_usage = usage;
+ return 0;
+}
+
+int SerialBase::set_dma_usage_rx(DMAUsage usage)
+{
+ if (serial_tx_active(&_serial)) {
+ return -1;
+ }
+ _rx_usage = usage;
+ return 0;
+}
+
+int SerialBase::read(uint8_t *buffer, int length, const event_callback_t& callback, int event, unsigned char char_match)
+{
+ if (serial_rx_active(&_serial)) {
+ return -1; // transaction ongoing
+ }
+ start_read((void*)buffer, length, 8, callback, event, char_match);
+ return 0;
+}
+
+
+int SerialBase::read(uint16_t *buffer, int length, const event_callback_t& callback, int event, unsigned char char_match)
+{
+ if (serial_rx_active(&_serial)) {
+ return -1; // transaction ongoing
+ }
+ start_read((void*)buffer, length, 16, callback, event, char_match);
+ return 0;
+}
+
+
+void SerialBase::start_read(void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event, unsigned char char_match)
+{
+ _rx_callback = callback;
+ _thunk_irq.callback(&SerialBase::interrupt_handler_asynch);
+ serial_rx_asynch(&_serial, buffer, buffer_size, buffer_width, _thunk_irq.entry(), event, char_match, _rx_usage);
+}
+
+void SerialBase::interrupt_handler_asynch(void)
+{
+ int event = serial_irq_handler_asynch(&_serial);
+ int rx_event = event & SERIAL_EVENT_RX_MASK;
+ if (_rx_callback && rx_event) {
+ _rx_callback.call(rx_event);
+ }
+
+ int tx_event = event & SERIAL_EVENT_TX_MASK;
+ if (_tx_callback && tx_event) {
+ _tx_callback.call(tx_event);
+ }
+}
+
+#endif
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/Stream.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/Stream.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,151 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Stream.h"
+
+namespace mbed {
+
+Stream::Stream(const char *name) : FileLike(name), _file(NULL) {
+ // No lock needed in constructor
+ /* open ourselves */
+ char buf[12]; /* :0x12345678 + null byte */
+ std::sprintf(buf, ":%p", this);
+ _file = std::fopen(buf, "w+");
+ mbed_set_unbuffered_stream(_file);
+}
+
+Stream::~Stream() {
+ // No lock can be used in destructor
+ fclose(_file);
+}
+
+int Stream::putc(int c) {
+ lock();
+ fflush(_file);
+ int ret = std::fputc(c, _file);
+ unlock();
+ return ret;
+}
+int Stream::puts(const char *s) {
+ lock();
+ fflush(_file);
+ int ret = std::fputs(s, _file);
+ unlock();
+ return ret;
+}
+int Stream::getc() {
+ lock();
+ fflush(_file);
+ int ret = mbed_getc(_file);
+ unlock();
+ return ret;
+}
+char* Stream::gets(char *s, int size) {
+ lock();
+ fflush(_file);
+ char *ret = mbed_gets(s,size,_file);
+ unlock();
+ return ret;
+}
+
+int Stream::close() {
+ return 0;
+}
+
+ssize_t Stream::write(const void* buffer, size_t length) {
+ const char* ptr = (const char*)buffer;
+ const char* end = ptr + length;
+
+ lock();
+ while (ptr != end) {
+ if (_putc(*ptr++) == EOF) {
+ break;
+ }
+ }
+ unlock();
+
+ return ptr - (const char*)buffer;
+}
+
+ssize_t Stream::read(void* buffer, size_t length) {
+ char* ptr = (char*)buffer;
+ char* end = ptr + length;
+
+ lock();
+ while (ptr != end) {
+ int c = _getc();
+ if (c==EOF) break;
+ *ptr++ = c;
+ }
+ unlock();
+
+ return ptr - (const char*)buffer;
+}
+
+off_t Stream::lseek(off_t offset, int whence) {
+ return 0;
+}
+
+int Stream::isatty() {
+ return 0;
+}
+
+int Stream::fsync() {
+ return 0;
+}
+
+off_t Stream::flen() {
+ return 0;
+}
+
+int Stream::printf(const char* format, ...) {
+ lock();
+ std::va_list arg;
+ va_start(arg, format);
+ fflush(_file);
+ int r = vfprintf(_file, format, arg);
+ va_end(arg);
+ unlock();
+ return r;
+}
+
+int Stream::scanf(const char* format, ...) {
+ lock();
+ std::va_list arg;
+ va_start(arg, format);
+ fflush(_file);
+ int r = vfscanf(_file, format, arg);
+ va_end(arg);
+ unlock();
+ return r;
+}
+
+int Stream::vprintf(const char* format, std::va_list args) {
+ lock();
+ fflush(_file);
+ int r = vfprintf(_file, format, args);
+ unlock();
+ return r;
+}
+
+int Stream::vscanf(const char* format, std::va_list args) {
+ lock();
+ fflush(_file);
+ int r = vfscanf(_file, format, args);
+ unlock();
+ return r;
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/Ticker.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/Ticker.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Ticker.h"
+
+#include "TimerEvent.h"
+#include "FunctionPointer.h"
+#include "ticker_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+void Ticker::detach() {
+ core_util_critical_section_enter();
+ remove();
+ _function.attach(0);
+ core_util_critical_section_exit();
+}
+
+void Ticker::setup(timestamp_t t) {
+ core_util_critical_section_enter();
+ remove();
+ _delay = t;
+ insert(_delay + ticker_read(_ticker_data));
+ core_util_critical_section_exit();
+}
+
+void Ticker::handler() {
+ insert(event.timestamp + _delay);
+ _function.call();
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/Timeout.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/Timeout.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,24 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Timeout.h"
+
+namespace mbed {
+
+void Timeout::handler() {
+ _function.call();
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/Timer.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/Timer.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,83 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Timer.h"
+#include "ticker_api.h"
+#include "us_ticker_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+Timer::Timer() : _running(), _start(), _time(), _ticker_data(get_us_ticker_data()) {
+ reset();
+}
+
+Timer::Timer(const ticker_data_t *data) : _running(), _start(), _time(), _ticker_data(data) {
+ reset();
+}
+
+void Timer::start() {
+ core_util_critical_section_enter();
+ if (!_running) {
+ _start = ticker_read(_ticker_data);
+ _running = 1;
+ }
+ core_util_critical_section_exit();
+}
+
+void Timer::stop() {
+ core_util_critical_section_enter();
+ _time += slicetime();
+ _running = 0;
+ core_util_critical_section_exit();
+}
+
+int Timer::read_us() {
+ core_util_critical_section_enter();
+ int time = _time + slicetime();
+ core_util_critical_section_exit();
+ return time;
+}
+
+float Timer::read() {
+ return (float)read_us() / 1000000.0f;
+}
+
+int Timer::read_ms() {
+ return read_us() / 1000;
+}
+
+int Timer::slicetime() {
+ core_util_critical_section_enter();
+ int ret = 0;
+ if (_running) {
+ ret = ticker_read(_ticker_data) - _start;
+ }
+ core_util_critical_section_exit();
+ return ret;
+}
+
+void Timer::reset() {
+ core_util_critical_section_enter();
+ _start = ticker_read(_ticker_data);
+ _time = 0;
+ core_util_critical_section_exit();
+}
+
+Timer::operator float() {
+ return read();
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/TimerEvent.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/TimerEvent.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,51 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "TimerEvent.h"
+#include "cmsis.h"
+
+#include <stddef.h>
+#include "ticker_api.h"
+#include "us_ticker_api.h"
+
+namespace mbed {
+
+TimerEvent::TimerEvent() : event(), _ticker_data(get_us_ticker_data()) {
+ ticker_set_handler(_ticker_data, (&TimerEvent::irq));
+}
+
+TimerEvent::TimerEvent(const ticker_data_t *data) : event(), _ticker_data(data) {
+ ticker_set_handler(_ticker_data, (&TimerEvent::irq));
+}
+
+void TimerEvent::irq(uint32_t id) {
+ TimerEvent *timer_event = (TimerEvent*)id;
+ timer_event->handler();
+}
+
+TimerEvent::~TimerEvent() {
+ remove();
+}
+
+// insert in to linked list
+void TimerEvent::insert(timestamp_t timestamp) {
+ ticker_insert_event(_ticker_data, &event, timestamp, (uint32_t)this);
+}
+
+void TimerEvent::remove() {
+ ticker_remove_event(_ticker_data, &event);
+}
+
+} // namespace mbed
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_alloc_wrappers.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_alloc_wrappers.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,338 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed_mem_trace.h"
+#include "mbed_stats.h"
+#include "toolchain.h"
+#include "SingletonPtr.h"
+#include "PlatformMutex.h"
+#include <stddef.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+
+/* There are two memory tracers in mbed OS:
+
+- the first can be used to detect the maximum heap usage at runtime. It is
+ activated by defining the MBED_HEAP_STATS_ENABLED macro.
+- the second can be used to trace each memory call by automatically invoking
+ a callback on each memory operation (see hal/api/mbed_mem_trace.h). It is
+ activated by defining the MBED_MEM_TRACING_ENABLED macro.
+
+Both tracers can be activated and deactivated in any combination. If both tracers
+are active, the second one (MBED_MEM_TRACING_ENABLED) will trace the first one's
+(MBED_HEAP_STATS_ENABLED) memory calls.*/
+
+/******************************************************************************/
+/* Implementation of the runtime max heap usage checker */
+/******************************************************************************/
+
+/* Size must be a multiple of 8 to keep alignment */
+typedef struct {
+ uint32_t size;
+ uint32_t pad;
+} alloc_info_t;
+
+#ifdef MBED_MEM_TRACING_ENABLED
+static SingletonPtr<PlatformMutex> mem_trace_mutex;
+#endif
+#ifdef MBED_HEAP_STATS_ENABLED
+static SingletonPtr<PlatformMutex> malloc_stats_mutex;
+static mbed_stats_heap_t heap_stats = {0, 0, 0, 0, 0};
+#endif
+
+void mbed_stats_heap_get(mbed_stats_heap_t *stats)
+{
+#ifdef MBED_HEAP_STATS_ENABLED
+ malloc_stats_mutex->lock();
+ memcpy(stats, &heap_stats, sizeof(mbed_stats_heap_t));
+ malloc_stats_mutex->unlock();
+#else
+ memset(stats, 0, sizeof(mbed_stats_heap_t));
+#endif
+}
+
+/******************************************************************************/
+/* GCC memory allocation wrappers */
+/******************************************************************************/
+
+#if defined(TOOLCHAIN_GCC)
+
+#ifdef FEATURE_UVISOR
+#include "uvisor-lib/uvisor-lib.h"
+#endif/* FEATURE_UVISOR */
+
+extern "C" {
+ void * __real__malloc_r(struct _reent * r, size_t size);
+ void * __real__realloc_r(struct _reent * r, void * ptr, size_t size);
+ void __real__free_r(struct _reent * r, void * ptr);
+ void* __real__calloc_r(struct _reent * r, size_t nmemb, size_t size);
+}
+
+// TODO: memory tracing doesn't work with uVisor enabled.
+#if !defined(FEATURE_UVISOR)
+
+extern "C" void * __wrap__malloc_r(struct _reent * r, size_t size) {
+ void *ptr = NULL;
+#ifdef MBED_HEAP_STATS_ENABLED
+ malloc_stats_mutex->lock();
+ alloc_info_t *alloc_info = (alloc_info_t*)__real__malloc_r(r, size + sizeof(alloc_info_t));
+ if (alloc_info != NULL) {
+ alloc_info->size = size;
+ ptr = (void*)(alloc_info + 1);
+ heap_stats.current_size += size;
+ heap_stats.total_size += size;
+ heap_stats.alloc_cnt += 1;
+ if (heap_stats.current_size > heap_stats.max_size) {
+ heap_stats.max_size = heap_stats.current_size;
+ }
+ } else {
+ heap_stats.alloc_fail_cnt += 1;
+ }
+ malloc_stats_mutex->unlock();
+#else // #ifdef MBED_HEAP_STATS_ENABLED
+ ptr = __real__malloc_r(r, size);
+#endif // #ifdef MBED_HEAP_STATS_ENABLED
+#ifdef MBED_MEM_TRACING_ENABLED
+ mem_trace_mutex->lock();
+ mbed_mem_trace_malloc(ptr, size, MBED_CALLER_ADDR());
+ mem_trace_mutex->unlock();
+#endif // #ifdef MBED_MEM_TRACING_ENABLED
+ return ptr;
+}
+
+extern "C" void * __wrap__realloc_r(struct _reent * r, void * ptr, size_t size) {
+ void *new_ptr = NULL;
+#ifdef MBED_HEAP_STATS_ENABLED
+ // Implement realloc_r with malloc and free.
+ // The function realloc_r can't be used here directly since
+ // it can call into __wrap__malloc_r (returns ptr + 4) or
+ // resize memory directly (returns ptr + 0).
+
+ // Note - no lock needed since malloc and free are thread safe
+
+ // Get old size
+ uint32_t old_size = 0;
+ if (ptr != NULL) {
+ alloc_info_t *alloc_info = ((alloc_info_t*)ptr) - 1;
+ old_size = alloc_info->size;
+ }
+
+ // Allocate space
+ if (size != 0) {
+ new_ptr = malloc(size);
+ }
+
+ // If the new buffer has been allocated copy the data to it
+ // and free the old buffer
+ if (new_ptr != NULL) {
+ uint32_t copy_size = (old_size < size) ? old_size : size;
+ memcpy(new_ptr, (void*)ptr, copy_size);
+ free(ptr);
+ }
+#else // #ifdef MBED_HEAP_STATS_ENABLED
+ new_ptr = __real__realloc_r(r, ptr, size);
+#endif // #ifdef MBED_HEAP_STATS_ENABLED
+#ifdef MBED_MEM_TRACING_ENABLED
+ mem_trace_mutex->lock();
+ mbed_mem_trace_realloc(new_ptr, ptr, size, MBED_CALLER_ADDR());
+ mem_trace_mutex->unlock();
+#endif // #ifdef MBED_MEM_TRACING_ENABLED
+ return new_ptr;
+}
+
+extern "C" void __wrap__free_r(struct _reent * r, void * ptr) {
+#ifdef MBED_HEAP_STATS_ENABLED
+ malloc_stats_mutex->lock();
+ alloc_info_t *alloc_info = NULL;
+ if (ptr != NULL) {
+ alloc_info = ((alloc_info_t*)ptr) - 1;
+ heap_stats.current_size -= alloc_info->size;
+ heap_stats.alloc_cnt -= 1;
+ }
+ __real__free_r(r, (void*)alloc_info);
+ malloc_stats_mutex->unlock();
+#else // #ifdef MBED_HEAP_STATS_ENABLED
+ __real__free_r(r, ptr);
+#endif // #ifdef MBED_HEAP_STATS_ENABLED
+#ifdef MBED_MEM_TRACING_ENABLED
+ mem_trace_mutex->lock();
+ mbed_mem_trace_free(ptr, MBED_CALLER_ADDR());
+ mem_trace_mutex->unlock();
+#endif // #ifdef MBED_MEM_TRACING_ENABLED
+}
+
+#endif // if !defined(FEATURE_UVISOR)
+
+extern "C" void * __wrap__calloc_r(struct _reent * r, size_t nmemb, size_t size) {
+ void *ptr = NULL;
+#ifdef MBED_HEAP_STATS_ENABLED
+ // Note - no lock needed since malloc is thread safe
+
+ ptr = malloc(nmemb * size);
+ if (ptr != NULL) {
+ memset(ptr, 0, nmemb * size);
+ }
+#else // #ifdef MBED_HEAP_STATS_ENABLED
+ ptr = __real__calloc_r(r, nmemb, size);
+#endif // #ifdef MBED_HEAP_STATS_ENABLED
+#ifdef MBED_MEM_TRACING_ENABLED
+ mem_trace_mutex->lock();
+ mbed_mem_trace_calloc(ptr, nmemb, size, MBED_CALLER_ADDR());
+ mem_trace_mutex->unlock();
+#endif // #ifdef MBED_MEM_TRACING_ENABLED
+ return ptr;
+}
+
+
+/******************************************************************************/
+/* ARMCC memory allocation wrappers */
+/******************************************************************************/
+
+#elif defined(TOOLCHAIN_ARM) // #if defined(TOOLCHAIN_GCC)
+
+/* Enable hooking of memory function only if tracing is also enabled */
+#if defined(MBED_MEM_TRACING_ENABLED) || defined(MBED_HEAP_STATS_ENABLED)
+
+extern "C" {
+ void *$Super$$malloc(size_t size);
+ void *$Super$$realloc(void *ptr, size_t size);
+ void *$Super$$calloc(size_t nmemb, size_t size);
+ void $Super$$free(void *ptr);
+}
+
+extern "C" void* $Sub$$malloc(size_t size) {
+ void *ptr = NULL;
+#ifdef MBED_HEAP_STATS_ENABLED
+ malloc_stats_mutex->lock();
+ alloc_info_t *alloc_info = (alloc_info_t*)$Super$$malloc(size + sizeof(alloc_info_t));
+ if (alloc_info != NULL) {
+ alloc_info->size = size;
+ ptr = (void*)(alloc_info + 1);
+ heap_stats.current_size += size;
+ heap_stats.total_size += size;
+ heap_stats.alloc_cnt += 1;
+ if (heap_stats.current_size > heap_stats.max_size) {
+ heap_stats.max_size = heap_stats.current_size;
+ }
+ } else {
+ heap_stats.alloc_fail_cnt += 1;
+ }
+ malloc_stats_mutex->unlock();
+#else // #ifdef MBED_HEAP_STATS_ENABLED
+ ptr = $Super$$malloc(size);
+#endif // #ifdef MBED_HEAP_STATS_ENABLED
+#ifdef MBED_MEM_TRACING_ENABLED
+ mem_trace_mutex->lock();
+ mbed_mem_trace_malloc(ptr, size, MBED_CALLER_ADDR());
+ mem_trace_mutex->unlock();
+#endif // #ifdef MBED_MEM_TRACING_ENABLED
+ return ptr;
+}
+
+extern "C" void* $Sub$$realloc(void *ptr, size_t size) {
+ void *new_ptr = NULL;
+#ifdef MBED_HEAP_STATS_ENABLED
+ // Note - no lock needed since malloc and free are thread safe
+
+ // Get old size
+ uint32_t old_size = 0;
+ if (ptr != NULL) {
+ alloc_info_t *alloc_info = ((alloc_info_t*)ptr) - 1;
+ old_size = alloc_info->size;
+ }
+
+ // Allocate space
+ if (size != 0) {
+ new_ptr = malloc(size);
+ }
+
+ // If the new buffer has been allocated copy the data to it
+ // and free the old buffer
+ if (new_ptr != NULL) {
+ uint32_t copy_size = (old_size < size) ? old_size : size;
+ memcpy(new_ptr, (void*)ptr, copy_size);
+ free(ptr);
+ }
+#else // #ifdef MBED_HEAP_STATS_ENABLED
+ new_ptr = $Super$$realloc(ptr, size);
+#endif // #ifdef MBED_HEAP_STATS_ENABLED
+#ifdef MBED_MEM_TRACING_ENABLED
+ mem_trace_mutex->lock();
+ mbed_mem_trace_realloc(new_ptr, ptr, size, MBED_CALLER_ADDR());
+ mem_trace_mutex->unlock();
+#endif // #ifdef MBED_MEM_TRACING_ENABLED
+ return new_ptr;
+}
+
+extern "C" void *$Sub$$calloc(size_t nmemb, size_t size) {
+ void *ptr = NULL;
+#ifdef MBED_HEAP_STATS_ENABLED
+ // Note - no lock needed since malloc is thread safe
+ ptr = malloc(nmemb * size);
+ if (ptr != NULL) {
+ memset(ptr, 0, nmemb * size);
+ }
+#else // #ifdef MBED_HEAP_STATS_ENABLED
+ ptr = $Super$$calloc(nmemb, size);
+#endif // #ifdef MBED_HEAP_STATS_ENABLED
+#ifdef MBED_MEM_TRACING_ENABLED
+ mem_trace_mutex->lock();
+ mbed_mem_trace_calloc(ptr, nmemb, size, MBED_CALLER_ADDR());
+ mem_trace_mutex->unlock();
+#endif // #ifdef MBED_MEM_TRACING_ENABLED
+ return ptr;
+}
+
+extern "C" void $Sub$$free(void *ptr) {
+#ifdef MBED_HEAP_STATS_ENABLED
+ malloc_stats_mutex->lock();
+ alloc_info_t *alloc_info = NULL;
+ if (ptr != NULL) {
+ alloc_info = ((alloc_info_t*)ptr) - 1;
+ heap_stats.current_size -= alloc_info->size;
+ heap_stats.alloc_cnt -= 1;
+ }
+ $Super$$free((void*)alloc_info);
+ malloc_stats_mutex->unlock();
+#else // #ifdef MBED_HEAP_STATS_ENABLED
+ $Super$$free(ptr);
+#endif // #ifdef MBED_HEAP_STATS_ENABLED
+#ifdef MBED_MEM_TRACING_ENABLED
+ mem_trace_mutex->lock();
+ mbed_mem_trace_free(ptr, MBED_CALLER_ADDR());
+ mem_trace_mutex->unlock();
+#endif // #ifdef MBED_MEM_TRACING_ENABLED
+}
+
+#endif // #if defined(MBED_MEM_TRACING_ENABLED) || defined(MBED_HEAP_STATS_ENABLED)
+
+/******************************************************************************/
+/* Allocation wrappers for other toolchains are not supported yet */
+/******************************************************************************/
+
+#else // #if defined(TOOLCHAIN_GCC)
+
+#ifdef MBED_MEM_TRACING_ENABLED
+#warning Memory tracing is not supported with the current toolchain.
+#endif
+
+#ifdef MBED_HEAP_STATS_ENABLED
+#warning Heap statistics are not supported with the current toolchain.
+#endif
+
+#endif // #if defined(TOOLCHAIN_GCC)
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_assert.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_assert.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,27 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "mbed_assert.h"
+#include "device.h"
+
+#include "mbed_interface.h"
+#include "critical.h"
+
+void mbed_assert_internal(const char *expr, const char *file, int line)
+{
+ core_util_critical_section_enter();
+ mbed_error_printf("mbed assertation failed: %s, file: %s, line %d \n", expr, file, line);
+ mbed_die();
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_board.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_board.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,91 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stdio.h>
+#include "gpio_api.h"
+#include "wait_api.h"
+#include "toolchain.h"
+#include "mbed_interface.h"
+#include "critical.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL
+extern int stdio_uart_inited;
+extern serial_t stdio_uart;
+#endif
+
+WEAK void mbed_die(void) {
+#if !defined (NRF51_H) && !defined(TARGET_EFM32)
+ core_util_critical_section_enter();
+#endif
+#if (DEVICE_ERROR_RED == 1)
+ gpio_t led_red; gpio_init_out(&led_red, LED_RED);
+#elif (DEVICE_ERROR_PATTERN == 1)
+ gpio_t led_1; gpio_init_out(&led_1, LED1);
+ gpio_t led_2; gpio_init_out(&led_2, LED2);
+ gpio_t led_3; gpio_init_out(&led_3, LED3);
+ gpio_t led_4; gpio_init_out(&led_4, LED4);
+#endif
+
+ while (1) {
+#if (DEVICE_ERROR_RED == 1)
+ gpio_write(&led_red, 1);
+
+#elif (DEVICE_ERROR_PATTERN == 1)
+ gpio_write(&led_1, 1);
+ gpio_write(&led_2, 0);
+ gpio_write(&led_3, 0);
+ gpio_write(&led_4, 1);
+#endif
+
+ wait_ms(150);
+
+#if (DEVICE_ERROR_RED == 1)
+ gpio_write(&led_red, 0);
+
+#elif (DEVICE_ERROR_PATTERN == 1)
+ gpio_write(&led_1, 0);
+ gpio_write(&led_2, 1);
+ gpio_write(&led_3, 1);
+ gpio_write(&led_4, 0);
+#endif
+
+ wait_ms(150);
+ }
+}
+
+void mbed_error_printf(const char* format, ...) {
+ va_list arg;
+ va_start(arg, format);
+ mbed_error_vfprintf(format, arg);
+ va_end(arg);
+}
+
+void mbed_error_vfprintf(const char * format, va_list arg) {
+#if DEVICE_SERIAL
+ core_util_critical_section_enter();
+ char buffer[128];
+ int size = vsprintf(buffer, format, arg);
+ if (size > 0) {
+ if (!stdio_uart_inited) {
+ serial_init(&stdio_uart, STDIO_UART_TX, STDIO_UART_RX);
+ }
+ for (int i = 0; i < size; i++) {
+ serial_putc(&stdio_uart, buffer[i]);
+ }
+ }
+ core_util_critical_section_exit();
+#endif
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_critical.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_critical.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,319 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "critical.h"
+
+#include "cmsis.h"
+#include "mbed_assert.h"
+
+#define EXCLUSIVE_ACCESS (!defined (__CORTEX_M0) && !defined (__CORTEX_M0PLUS))
+
+static volatile uint32_t interrupt_enable_counter = 0;
+static volatile bool critical_interrupts_disabled = false;
+
+bool core_util_are_interrupts_enabled(void)
+{
+#if defined(__CORTEX_A9)
+ return ((__get_CPSR() & 0x80) == 0);
+#else
+ return ((__get_PRIMASK() & 0x1) == 0);
+#endif
+}
+
+void core_util_critical_section_enter(void)
+{
+ bool interrupts_disabled = !core_util_are_interrupts_enabled();
+ __disable_irq();
+
+ /* Save the interrupt disabled state as it was prior to any nested critical section lock use */
+ if (!interrupt_enable_counter) {
+ critical_interrupts_disabled = interrupts_disabled;
+ }
+
+ /* If the interrupt_enable_counter overflows or we are in a nested critical section and interrupts
+ are enabled, then something has gone badly wrong thus assert an error.
+ */
+ MBED_ASSERT(interrupt_enable_counter < UINT32_MAX);
+// FIXME
+#ifndef FEATURE_UVISOR
+ if (interrupt_enable_counter > 0) {
+ MBED_ASSERT(interrupts_disabled);
+ }
+#else
+#warning "core_util_critical_section_enter needs fixing to work from unprivileged code"
+#endif /* FEATURE_UVISOR */
+ interrupt_enable_counter++;
+}
+
+void core_util_critical_section_exit(void)
+{
+ /* If critical_section_enter has not previously been called, do nothing */
+ if (interrupt_enable_counter) {
+
+// FIXME
+#ifndef FEATURE_UVISOR
+ bool interrupts_disabled = !core_util_are_interrupts_enabled(); /* get the current interrupt disabled state */
+
+ MBED_ASSERT(interrupts_disabled); /* Interrupts must be disabled on invoking an exit from a critical section */
+#else
+#warning "core_util_critical_section_exit needs fixing to work from unprivileged code"
+#endif /* FEATURE_UVISOR */
+
+ interrupt_enable_counter--;
+
+ /* Only re-enable interrupts if we are exiting the last of the nested critical sections and
+ interrupts were enabled on entry to the first critical section.
+ */
+ if (!interrupt_enable_counter && !critical_interrupts_disabled) {
+ __enable_irq();
+ }
+ }
+}
+
+#if EXCLUSIVE_ACCESS
+
+/* Supress __ldrex and __strex deprecated warnings - "#3731-D: intrinsic is deprecated" */
+#if defined (__CC_ARM)
+#pragma diag_suppress 3731
+#endif
+
+bool core_util_atomic_cas_u8(uint8_t *ptr, uint8_t *expectedCurrentValue, uint8_t desiredValue)
+{
+ uint8_t currentValue = __LDREXB((volatile uint8_t*)ptr);
+ if (currentValue != *expectedCurrentValue) {
+ *expectedCurrentValue = currentValue;
+ __CLREX();
+ return false;
+ }
+
+ return !__STREXB(desiredValue, (volatile uint8_t*)ptr);
+}
+
+bool core_util_atomic_cas_u16(uint16_t *ptr, uint16_t *expectedCurrentValue, uint16_t desiredValue)
+{
+ uint16_t currentValue = __LDREXH((volatile uint16_t*)ptr);
+ if (currentValue != *expectedCurrentValue) {
+ *expectedCurrentValue = currentValue;
+ __CLREX();
+ return false;
+ }
+
+ return !__STREXH(desiredValue, (volatile uint16_t*)ptr);
+}
+
+
+bool core_util_atomic_cas_u32(uint32_t *ptr, uint32_t *expectedCurrentValue, uint32_t desiredValue)
+{
+ uint32_t currentValue = __LDREXW((volatile uint32_t*)ptr);
+ if (currentValue != *expectedCurrentValue) {
+ *expectedCurrentValue = currentValue;
+ __CLREX();
+ return false;
+ }
+
+ return !__STREXW(desiredValue, (volatile uint32_t*)ptr);
+}
+
+uint8_t core_util_atomic_incr_u8(uint8_t *valuePtr, uint8_t delta)
+{
+ uint8_t newValue;
+ do {
+ newValue = __LDREXB((volatile uint8_t*)valuePtr) + delta;
+ } while (__STREXB(newValue, (volatile uint8_t*)valuePtr));
+ return newValue;
+}
+
+uint16_t core_util_atomic_incr_u16(uint16_t *valuePtr, uint16_t delta)
+{
+ uint16_t newValue;
+ do {
+ newValue = __LDREXH((volatile uint16_t*)valuePtr) + delta;
+ } while (__STREXH(newValue, (volatile uint16_t*)valuePtr));
+ return newValue;
+}
+
+uint32_t core_util_atomic_incr_u32(uint32_t *valuePtr, uint32_t delta)
+{
+ uint32_t newValue;
+ do {
+ newValue = __LDREXW((volatile uint32_t*)valuePtr) + delta;
+ } while (__STREXW(newValue, (volatile uint32_t*)valuePtr));
+ return newValue;
+}
+
+
+uint8_t core_util_atomic_decr_u8(uint8_t *valuePtr, uint8_t delta)
+{
+ uint8_t newValue;
+ do {
+ newValue = __LDREXB((volatile uint8_t*)valuePtr) - delta;
+ } while (__STREXB(newValue, (volatile uint8_t*)valuePtr));
+ return newValue;
+}
+
+uint16_t core_util_atomic_decr_u16(uint16_t *valuePtr, uint16_t delta)
+{
+ uint16_t newValue;
+ do {
+ newValue = __LDREXH((volatile uint16_t*)valuePtr) - delta;
+ } while (__STREXH(newValue, (volatile uint16_t*)valuePtr));
+ return newValue;
+}
+
+uint32_t core_util_atomic_decr_u32(uint32_t *valuePtr, uint32_t delta)
+{
+ uint32_t newValue;
+ do {
+ newValue = __LDREXW((volatile uint32_t*)valuePtr) - delta;
+ } while (__STREXW(newValue, (volatile uint32_t*)valuePtr));
+ return newValue;
+}
+
+#else
+
+bool core_util_atomic_cas_u8(uint8_t *ptr, uint8_t *expectedCurrentValue, uint8_t desiredValue)
+{
+ bool success;
+ uint8_t currentValue;
+ core_util_critical_section_enter();
+ currentValue = *ptr;
+ if (currentValue == *expectedCurrentValue) {
+ *ptr = desiredValue;
+ success = true;
+ } else {
+ *expectedCurrentValue = currentValue;
+ success = false;
+ }
+ core_util_critical_section_exit();
+ return success;
+}
+
+bool core_util_atomic_cas_u16(uint16_t *ptr, uint16_t *expectedCurrentValue, uint16_t desiredValue)
+{
+ bool success;
+ uint16_t currentValue;
+ core_util_critical_section_enter();
+ currentValue = *ptr;
+ if (currentValue == *expectedCurrentValue) {
+ *ptr = desiredValue;
+ success = true;
+ } else {
+ *expectedCurrentValue = currentValue;
+ success = false;
+ }
+ core_util_critical_section_exit();
+ return success;
+}
+
+
+bool core_util_atomic_cas_u32(uint32_t *ptr, uint32_t *expectedCurrentValue, uint32_t desiredValue)
+{
+ bool success;
+ uint32_t currentValue;
+ core_util_critical_section_enter();
+ currentValue = *ptr;
+ if (currentValue == *expectedCurrentValue) {
+ *ptr = desiredValue;
+ success = true;
+ } else {
+ *expectedCurrentValue = currentValue;
+ success = false;
+ }
+ core_util_critical_section_exit();
+ return success;
+}
+
+
+uint8_t core_util_atomic_incr_u8(uint8_t *valuePtr, uint8_t delta)
+{
+ uint8_t newValue;
+ core_util_critical_section_enter();
+ newValue = *valuePtr + delta;
+ *valuePtr = newValue;
+ core_util_critical_section_exit();
+ return newValue;
+}
+
+uint16_t core_util_atomic_incr_u16(uint16_t *valuePtr, uint16_t delta)
+{
+ uint16_t newValue;
+ core_util_critical_section_enter();
+ newValue = *valuePtr + delta;
+ *valuePtr = newValue;
+ core_util_critical_section_exit();
+ return newValue;
+}
+
+uint32_t core_util_atomic_incr_u32(uint32_t *valuePtr, uint32_t delta)
+{
+ uint32_t newValue;
+ core_util_critical_section_enter();
+ newValue = *valuePtr + delta;
+ *valuePtr = newValue;
+ core_util_critical_section_exit();
+ return newValue;
+}
+
+
+uint8_t core_util_atomic_decr_u8(uint8_t *valuePtr, uint8_t delta)
+{
+ uint8_t newValue;
+ core_util_critical_section_enter();
+ newValue = *valuePtr - delta;
+ *valuePtr = newValue;
+ core_util_critical_section_exit();
+ return newValue;
+}
+
+uint16_t core_util_atomic_decr_u16(uint16_t *valuePtr, uint16_t delta)
+{
+ uint16_t newValue;
+ core_util_critical_section_enter();
+ newValue = *valuePtr - delta;
+ *valuePtr = newValue;
+ core_util_critical_section_exit();
+ return newValue;
+}
+
+uint32_t core_util_atomic_decr_u32(uint32_t *valuePtr, uint32_t delta)
+{
+ uint32_t newValue;
+ core_util_critical_section_enter();
+ newValue = *valuePtr - delta;
+ *valuePtr = newValue;
+ core_util_critical_section_exit();
+ return newValue;
+}
+
+#endif
+
+
+bool core_util_atomic_cas_ptr(void **ptr, void **expectedCurrentValue, void *desiredValue) {
+ return core_util_atomic_cas_u32(
+ (uint32_t *)ptr,
+ (uint32_t *)expectedCurrentValue,
+ (uint32_t)desiredValue);
+}
+
+void *core_util_atomic_incr_ptr(void **valuePtr, ptrdiff_t delta) {
+ return (void *)core_util_atomic_incr_u32((uint32_t *)valuePtr, (uint32_t)delta);
+}
+
+void *core_util_atomic_decr_ptr(void **valuePtr, ptrdiff_t delta) {
+ return (void *)core_util_atomic_decr_u32((uint32_t *)valuePtr, (uint32_t)delta);
+}
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_error.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_error.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,32 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stdlib.h>
+#include <stdarg.h>
+#include "device.h"
+#include "toolchain.h"
+#include "mbed_error.h"
+#include "mbed_interface.h"
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#endif
+
+WEAK void error(const char* format, ...) {
+ va_list arg;
+ va_start(arg, format);
+ mbed_error_vfprintf(format, arg);
+ va_end(arg);
+ exit(1);
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_gpio.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_gpio.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,61 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "gpio_api.h"
+
+static inline void _gpio_init_in(gpio_t* gpio, PinName pin, PinMode mode)
+{
+ gpio_init(gpio, pin);
+ if (pin != NC) {
+ gpio_dir(gpio, PIN_INPUT);
+ gpio_mode(gpio, mode);
+ }
+}
+
+static inline void _gpio_init_out(gpio_t* gpio, PinName pin, PinMode mode, int value)
+{
+ gpio_init(gpio, pin);
+ if (pin != NC) {
+ gpio_write(gpio, value);
+ gpio_dir(gpio, PIN_OUTPUT);
+ gpio_mode(gpio, mode);
+ }
+}
+
+void gpio_init_in(gpio_t* gpio, PinName pin) {
+ gpio_init_in_ex(gpio, pin, PullDefault);
+}
+
+void gpio_init_in_ex(gpio_t* gpio, PinName pin, PinMode mode) {
+ _gpio_init_in(gpio, pin, mode);
+}
+
+void gpio_init_out(gpio_t* gpio, PinName pin) {
+ gpio_init_out_ex(gpio, pin, 0);
+}
+
+void gpio_init_out_ex(gpio_t* gpio, PinName pin, int value) {
+ _gpio_init_out(gpio, pin, PullNone, value);
+}
+
+void gpio_init_inout(gpio_t* gpio, PinName pin, PinDirection direction, PinMode mode, int value) {
+ if (direction == PIN_INPUT) {
+ _gpio_init_in(gpio, pin, mode);
+ if (pin != NC)
+ gpio_write(gpio, value); // we prepare the value in case it is switched later
+ } else {
+ _gpio_init_out(gpio, pin, mode, value);
+ }
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_interface.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_interface.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,113 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stdio.h>
+#include "mbed_interface.h"
+
+#include "gpio_api.h"
+#include "wait_api.h"
+#include "semihost_api.h"
+#include "mbed_error.h"
+#include "toolchain.h"
+
+#if DEVICE_SEMIHOST
+
+// return true if a debugger is attached, indicating mbed interface is connected
+int mbed_interface_connected(void) {
+ return semihost_connected();
+}
+
+int mbed_interface_reset(void) {
+ if (mbed_interface_connected()) {
+ semihost_reset();
+ return 0;
+ } else {
+ return -1;
+ }
+}
+
+WEAK int mbed_interface_uid(char *uid) {
+ if (mbed_interface_connected()) {
+ return semihost_uid(uid); // Returns 0 if successful, -1 on failure
+ } else {
+ uid[0] = 0;
+ return -1;
+ }
+}
+
+int mbed_interface_disconnect(void) {
+ int res;
+ if (mbed_interface_connected()) {
+ if ((res = semihost_disabledebug()) != 0)
+ return res;
+ while (mbed_interface_connected());
+ return 0;
+ } else {
+ return -1;
+ }
+}
+
+int mbed_interface_powerdown(void) {
+ int res;
+ if (mbed_interface_connected()) {
+ if ((res = semihost_powerdown()) != 0)
+ return res;
+ while (mbed_interface_connected());
+ return 0;
+ } else {
+ return -1;
+ }
+}
+
+// for backward compatibility
+void mbed_reset(void) {
+ mbed_interface_reset();
+}
+
+WEAK int mbed_uid(char *uid) {
+ return mbed_interface_uid(uid);
+}
+#endif
+
+WEAK void mbed_mac_address(char *mac) {
+#if DEVICE_SEMIHOST
+ char uid[DEVICE_ID_LENGTH + 1];
+ int i;
+
+ // if we have a UID, extract the MAC
+ if (mbed_interface_uid(uid) == 0) {
+ char *p = uid;
+#if defined(DEVICE_MAC_OFFSET)
+ p += DEVICE_MAC_OFFSET;
+#endif
+ for (i=0; i<6; i++) {
+ int byte;
+ sscanf(p, "%2x", &byte);
+ mac[i] = byte;
+ p += 2;
+ }
+ mac[0] &= ~0x01; // reset the IG bit in the address; see IEE 802.3-2002, Section 3.2.3(b)
+ } else { // else return a default MAC
+#endif
+ mac[0] = 0x00;
+ mac[1] = 0x02;
+ mac[2] = 0xF7;
+ mac[3] = 0xF0;
+ mac[4] = 0x00;
+ mac[5] = 0x00;
+#if DEVICE_SEMIHOST
+ }
+#endif
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_lp_ticker_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_lp_ticker_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "lp_ticker_api.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+static ticker_event_queue_t events;
+
+static const ticker_interface_t lp_interface = {
+ .init = lp_ticker_init,
+ .read = lp_ticker_read,
+ .disable_interrupt = lp_ticker_disable_interrupt,
+ .clear_interrupt = lp_ticker_clear_interrupt,
+ .set_interrupt = lp_ticker_set_interrupt,
+};
+
+static const ticker_data_t lp_data = {
+ .interface = &lp_interface,
+ .queue = &events,
+};
+
+const ticker_data_t* get_lp_ticker_data(void)
+{
+ return &lp_data;
+}
+
+void lp_ticker_irq_handler(void)
+{
+ ticker_irq_handler(&lp_data);
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_mem_trace.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_mem_trace.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdlib.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include "mbed_mem_trace.h"
+#include "critical.h"
+
+/******************************************************************************
+ * Internal variables, functions and helpers
+ *****************************************************************************/
+
+/* The callback function that will be called after a traced memory operations finishes. */
+static mbed_mem_trace_cb_t mem_trace_cb;
+/* 'trave_level' guards "trace inside trace" situations (for example, the implementation
+ * of realloc() might call malloc() internally, and since malloc() is also traced, this could
+ * result in two calls to the callback function instead of one. */
+static uint8_t trace_level;
+
+/******************************************************************************
+ * Public interface
+ *****************************************************************************/
+
+void mbed_mem_trace_set_callback(mbed_mem_trace_cb_t cb) {
+ mem_trace_cb = cb;
+}
+
+void *mbed_mem_trace_malloc(void *res, size_t size, void *caller) {
+ if (mem_trace_cb) {
+ if (core_util_atomic_incr_u8(&trace_level, 1) == 1) {
+ mem_trace_cb(MBED_MEM_TRACE_MALLOC, res, caller, size);
+ }
+ core_util_atomic_decr_u8(&trace_level, 1);
+ }
+ return res;
+}
+
+void *mbed_mem_trace_realloc(void *res, void *ptr, size_t size, void *caller) {
+ if (mem_trace_cb) {
+ if (core_util_atomic_incr_u8(&trace_level, 1) == 1) {
+ mem_trace_cb(MBED_MEM_TRACE_REALLOC, res, caller, ptr, size);
+ }
+ core_util_atomic_decr_u8(&trace_level, 1);
+ }
+ return res;
+}
+
+void *mbed_mem_trace_calloc(void *res, size_t num, size_t size, void *caller) {
+ if (mem_trace_cb) {
+ if (core_util_atomic_incr_u8(&trace_level, 1) == 1) {
+ mem_trace_cb(MBED_MEM_TRACE_CALLOC, res, caller, num, size);
+ }
+ core_util_atomic_decr_u8(&trace_level, 1);
+ }
+ return res;
+}
+
+void mbed_mem_trace_free(void *ptr, void *caller) {
+ if (mem_trace_cb) {
+ if (core_util_atomic_incr_u8(&trace_level, 1) == 1) {
+ mem_trace_cb(MBED_MEM_TRACE_FREE, NULL, caller, ptr);
+ }
+ core_util_atomic_decr_u8(&trace_level, 1);
+ }
+}
+
+void mbed_mem_trace_default_callback(uint8_t op, void *res, void *caller, ...) {
+ va_list va;
+ size_t temp_s1, temp_s2;
+ void *temp_ptr;
+
+ va_start(va, caller);
+ switch(op) {
+ case MBED_MEM_TRACE_MALLOC:
+ temp_s1 = va_arg(va, size_t);
+ printf(MBED_MEM_DEFAULT_TRACER_PREFIX "m:%p;%p-%u\n", res, caller, temp_s1);
+ break;
+
+ case MBED_MEM_TRACE_REALLOC:
+ temp_ptr = va_arg(va, void*);
+ temp_s1 = va_arg(va, size_t);
+ printf(MBED_MEM_DEFAULT_TRACER_PREFIX "r:%p;%p-%p;%u\n", res, caller, temp_ptr, temp_s1);
+ break;
+
+ case MBED_MEM_TRACE_CALLOC:
+ temp_s1 = va_arg(va, size_t);
+ temp_s2 = va_arg(va, size_t);
+ printf(MBED_MEM_DEFAULT_TRACER_PREFIX "c:%p;%p-%u;%u\n", res, caller, temp_s1, temp_s2);
+ break;
+
+ case MBED_MEM_TRACE_FREE:
+ temp_ptr = va_arg(va, void*);
+ printf(MBED_MEM_DEFAULT_TRACER_PREFIX "f:%p;%p-%p\n", res, caller, temp_ptr);
+ break;
+
+ default:
+ printf("?\n");
+ }
+ va_end(va);
+}
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_pinmap_common.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_pinmap_common.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,89 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "pinmap.h"
+#include "mbed_error.h"
+
+void pinmap_pinout(PinName pin, const PinMap *map) {
+ if (pin == NC)
+ return;
+
+ while (map->pin != NC) {
+ if (map->pin == pin) {
+ pin_function(pin, map->function);
+
+ pin_mode(pin, PullNone);
+ return;
+ }
+ map++;
+ }
+ error("could not pinout");
+}
+
+uint32_t pinmap_merge(uint32_t a, uint32_t b) {
+ // both are the same (inc both NC)
+ if (a == b)
+ return a;
+
+ // one (or both) is not connected
+ if (a == (uint32_t)NC)
+ return b;
+ if (b == (uint32_t)NC)
+ return a;
+
+ // mis-match error case
+ error("pinmap mis-match");
+ return (uint32_t)NC;
+}
+
+uint32_t pinmap_find_peripheral(PinName pin, const PinMap* map) {
+ while (map->pin != NC) {
+ if (map->pin == pin)
+ return map->peripheral;
+ map++;
+ }
+ return (uint32_t)NC;
+}
+
+uint32_t pinmap_peripheral(PinName pin, const PinMap* map) {
+ uint32_t peripheral = (uint32_t)NC;
+
+ if (pin == (PinName)NC)
+ return (uint32_t)NC;
+ peripheral = pinmap_find_peripheral(pin, map);
+ if ((uint32_t)NC == peripheral) // no mapping available
+ error("pinmap not found for peripheral");
+ return peripheral;
+}
+
+uint32_t pinmap_find_function(PinName pin, const PinMap* map) {
+ while (map->pin != NC) {
+ if (map->pin == pin)
+ return map->function;
+ map++;
+ }
+ return (uint32_t)NC;
+}
+
+uint32_t pinmap_function(PinName pin, const PinMap* map) {
+ uint32_t function = (uint32_t)NC;
+
+ if (pin == (PinName)NC)
+ return (uint32_t)NC;
+ function = pinmap_find_function(pin, map);
+ if ((uint32_t)NC == function) // no mapping available
+ error("pinmap not found for function");
+ return function;
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_rtc_time.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_rtc_time.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,100 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "rtc_api.h"
+
+#include <time.h>
+#include "critical.h"
+#include "rtc_time.h"
+#include "us_ticker_api.h"
+#include "SingletonPtr.h"
+#include "PlatformMutex.h"
+
+static SingletonPtr<PlatformMutex> _mutex;
+
+#if DEVICE_RTC
+static void (*_rtc_init)(void) = rtc_init;
+static int (*_rtc_isenabled)(void) = rtc_isenabled;
+static time_t (*_rtc_read)(void) = rtc_read;
+static void (*_rtc_write)(time_t t) = rtc_write;
+#else
+static void (*_rtc_init)(void) = NULL;
+static int (*_rtc_isenabled)(void) = NULL;
+static time_t (*_rtc_read)(void) = NULL;
+static void (*_rtc_write)(time_t t) = NULL;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#if defined (__ICCARM__)
+time_t __time32(time_t *timer)
+#else
+time_t time(time_t *timer)
+#endif
+
+{
+ _mutex->lock();
+ if (_rtc_isenabled != NULL) {
+ if (!(_rtc_isenabled())) {
+ set_time(0);
+ }
+ }
+
+ time_t t = 0;
+ if (_rtc_read != NULL) {
+ t = _rtc_read();
+ }
+
+ if (timer != NULL) {
+ *timer = t;
+ }
+ _mutex->unlock();
+ return t;
+}
+
+void set_time(time_t t) {
+ _mutex->lock();
+ if (_rtc_init != NULL) {
+ _rtc_init();
+ }
+ if (_rtc_write != NULL) {
+ _rtc_write(t);
+ }
+ _mutex->unlock();
+}
+
+clock_t clock() {
+ _mutex->lock();
+ clock_t t = us_ticker_read();
+ t /= 1000000 / CLOCKS_PER_SEC; // convert to processor time
+ _mutex->unlock();
+ return t;
+}
+
+void attach_rtc(time_t (*read_rtc)(void), void (*write_rtc)(time_t), void (*init_rtc)(void), int (*isenabled_rtc)(void)) {
+ _mutex->lock();
+ _rtc_read = read_rtc;
+ _rtc_write = write_rtc;
+ _rtc_init = init_rtc;
+ _rtc_isenabled = isenabled_rtc;
+ _mutex->unlock();
+}
+
+
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_semihost_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_semihost_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,162 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "cmsis.h"
+#include "semihost_api.h"
+
+#include <stdint.h>
+#include <string.h>
+
+#if DEVICE_SEMIHOST
+
+// ARM Semihosting Commands
+#define SYS_OPEN (0x1)
+#define SYS_CLOSE (0x2)
+#define SYS_WRITE (0x5)
+#define SYS_READ (0x6)
+#define SYS_ISTTY (0x9)
+#define SYS_SEEK (0xa)
+#define SYS_ENSURE (0xb)
+#define SYS_FLEN (0xc)
+#define SYS_REMOVE (0xe)
+#define SYS_RENAME (0xf)
+#define SYS_EXIT (0x18)
+
+// mbed Semihosting Commands
+#define RESERVED_FOR_USER_APPLICATIONS (0x100) // 0x100 - 0x1ff
+#define USR_XFFIND (RESERVED_FOR_USER_APPLICATIONS + 0)
+#define USR_UID (RESERVED_FOR_USER_APPLICATIONS + 1)
+#define USR_RESET (RESERVED_FOR_USER_APPLICATIONS + 2)
+#define USR_VBUS (RESERVED_FOR_USER_APPLICATIONS + 3)
+#define USR_POWERDOWN (RESERVED_FOR_USER_APPLICATIONS + 4)
+#define USR_DISABLEDEBUG (RESERVED_FOR_USER_APPLICATIONS + 5)
+
+#if DEVICE_LOCALFILESYSTEM
+FILEHANDLE semihost_open(const char* name, int openmode) {
+ uint32_t args[3];
+ args[0] = (uint32_t)name;
+ args[1] = (uint32_t)openmode;
+ args[2] = (uint32_t)strlen(name);
+ return __semihost(SYS_OPEN, args);
+}
+
+int semihost_close(FILEHANDLE fh) {
+ return __semihost(SYS_CLOSE, &fh);
+}
+
+int semihost_write(FILEHANDLE fh, const unsigned char* buffer, unsigned int length, int mode) {
+ if (length == 0) return 0;
+
+ uint32_t args[3];
+ args[0] = (uint32_t)fh;
+ args[1] = (uint32_t)buffer;
+ args[2] = (uint32_t)length;
+ return __semihost(SYS_WRITE, args);
+}
+
+int semihost_read(FILEHANDLE fh, unsigned char* buffer, unsigned int length, int mode) {
+ uint32_t args[3];
+ args[0] = (uint32_t)fh;
+ args[1] = (uint32_t)buffer;
+ args[2] = (uint32_t)length;
+ return __semihost(SYS_READ, args);
+}
+
+int semihost_istty(FILEHANDLE fh) {
+ return __semihost(SYS_ISTTY, &fh);
+}
+
+int semihost_seek(FILEHANDLE fh, long position) {
+ uint32_t args[2];
+ args[0] = (uint32_t)fh;
+ args[1] = (uint32_t)position;
+ return __semihost(SYS_SEEK, args);
+}
+
+int semihost_ensure(FILEHANDLE fh) {
+ return __semihost(SYS_ENSURE, &fh);
+}
+
+long semihost_flen(FILEHANDLE fh) {
+ return __semihost(SYS_FLEN, &fh);
+}
+
+int semihost_remove(const char *name) {
+ uint32_t args[2];
+ args[0] = (uint32_t)name;
+ args[1] = (uint32_t)strlen(name);
+ return __semihost(SYS_REMOVE, args);
+}
+
+int semihost_rename(const char *old_name, const char *new_name) {
+ uint32_t args[4];
+ args[0] = (uint32_t)old_name;
+ args[1] = (uint32_t)strlen(old_name);
+ args[0] = (uint32_t)new_name;
+ args[1] = (uint32_t)strlen(new_name);
+ return __semihost(SYS_RENAME, args);
+}
+#endif
+
+int semihost_exit(void) {
+ uint32_t args[4];
+ return __semihost(SYS_EXIT, args);
+}
+
+int semihost_uid(char *uid) {
+ uint32_t args[2];
+ args[0] = (uint32_t)uid;
+ args[1] = DEVICE_ID_LENGTH + 1;
+ return __semihost(USR_UID, &args);
+}
+
+int semihost_reset(void) {
+ // Does not normally return, however if used with older firmware versions
+ // that do not support this call it will return -1.
+ return __semihost(USR_RESET, NULL);
+}
+
+int semihost_vbus(void) {
+ return __semihost(USR_VBUS, NULL);
+}
+
+int semihost_powerdown(void) {
+ return __semihost(USR_POWERDOWN, NULL);
+}
+
+#if DEVICE_DEBUG_AWARENESS
+
+int semihost_connected(void) {
+ return (CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk) ? 1 : 0;
+}
+
+#else
+// These processors cannot know if the interface is connect, assume so:
+static int is_debugger_attached = 1;
+
+int semihost_connected(void) {
+ return is_debugger_attached;
+}
+#endif
+
+int semihost_disabledebug(void) {
+#if !(DEVICE_DEBUG_AWARENESS)
+ is_debugger_attached = 0;
+#endif
+ return __semihost(USR_DISABLEDEBUG, NULL);
+}
+
+#endif
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_ticker_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_ticker_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,135 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stddef.h>
+#include "ticker_api.h"
+#include "critical.h"
+
+void ticker_set_handler(const ticker_data_t *const data, ticker_event_handler handler) {
+ data->interface->init();
+
+ data->queue->event_handler = handler;
+}
+
+void ticker_irq_handler(const ticker_data_t *const data) {
+ data->interface->clear_interrupt();
+
+ /* Go through all the pending TimerEvents */
+ while (1) {
+ if (data->queue->head == NULL) {
+ // There are no more TimerEvents left, so disable matches.
+ data->interface->disable_interrupt();
+ return;
+ }
+
+ if ((int)(data->queue->head->timestamp - data->interface->read()) <= 0) {
+ // This event was in the past:
+ // point to the following one and execute its handler
+ ticker_event_t *p = data->queue->head;
+ data->queue->head = data->queue->head->next;
+ if (data->queue->event_handler != NULL) {
+ (*data->queue->event_handler)(p->id); // NOTE: the handler can set new events
+ }
+ /* Note: We continue back to examining the head because calling the
+ * event handler may have altered the chain of pending events. */
+ } else {
+ // This event and the following ones in the list are in the future:
+ // set it as next interrupt and return
+ data->interface->set_interrupt(data->queue->head->timestamp);
+ return;
+ }
+ }
+}
+
+void ticker_insert_event(const ticker_data_t *const data, ticker_event_t *obj, timestamp_t timestamp, uint32_t id) {
+ /* disable interrupts for the duration of the function */
+ core_util_critical_section_enter();
+
+ // initialise our data
+ obj->timestamp = timestamp;
+ obj->id = id;
+
+ /* Go through the list until we either reach the end, or find
+ an element this should come before (which is possibly the
+ head). */
+ ticker_event_t *prev = NULL, *p = data->queue->head;
+ while (p != NULL) {
+ /* check if we come before p */
+ if ((int)(timestamp - p->timestamp) < 0) {
+ break;
+ }
+ /* go to the next element */
+ prev = p;
+ p = p->next;
+ }
+ /* if prev is NULL we're at the head */
+ if (prev == NULL) {
+ data->queue->head = obj;
+ data->interface->set_interrupt(timestamp);
+ } else {
+ prev->next = obj;
+ }
+ /* if we're at the end p will be NULL, which is correct */
+ obj->next = p;
+
+ core_util_critical_section_exit();
+}
+
+void ticker_remove_event(const ticker_data_t *const data, ticker_event_t *obj) {
+ core_util_critical_section_enter();
+
+ // remove this object from the list
+ if (data->queue->head == obj) {
+ // first in the list, so just drop me
+ data->queue->head = obj->next;
+ if (data->queue->head == NULL) {
+ data->interface->disable_interrupt();
+ } else {
+ data->interface->set_interrupt(data->queue->head->timestamp);
+ }
+ } else {
+ // find the object before me, then drop me
+ ticker_event_t* p = data->queue->head;
+ while (p != NULL) {
+ if (p->next == obj) {
+ p->next = obj->next;
+ break;
+ }
+ p = p->next;
+ }
+ }
+
+ core_util_critical_section_exit();
+}
+
+timestamp_t ticker_read(const ticker_data_t *const data)
+{
+ return data->interface->read();
+}
+
+int ticker_get_next_timestamp(const ticker_data_t *const data, timestamp_t *timestamp)
+{
+ int ret = 0;
+
+ /* if head is NULL, there are no pending events */
+ core_util_critical_section_enter();
+ if (data->queue->head != NULL) {
+ *timestamp = data->queue->head->timestamp;
+ ret = 1;
+ }
+ core_util_critical_section_exit();
+
+ return ret;
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_us_ticker_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_us_ticker_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,41 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "us_ticker_api.h"
+
+static ticker_event_queue_t events;
+
+static const ticker_interface_t us_interface = {
+ .init = us_ticker_init,
+ .read = us_ticker_read,
+ .disable_interrupt = us_ticker_disable_interrupt,
+ .clear_interrupt = us_ticker_clear_interrupt,
+ .set_interrupt = us_ticker_set_interrupt,
+};
+
+static const ticker_data_t us_data = {
+ .interface = &us_interface,
+ .queue = &events,
+};
+
+const ticker_data_t* get_us_ticker_data(void)
+{
+ return &us_data;
+}
+
+void us_ticker_irq_handler(void)
+{
+ ticker_irq_handler(&us_data);
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/mbed_wait_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/mbed_wait_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,30 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "wait_api.h"
+#include "us_ticker_api.h"
+
+void wait(float s) {
+ wait_us(s * 1000000.0f);
+}
+
+void wait_ms(int ms) {
+ wait_us(ms * 1000);
+}
+
+void wait_us(int us) {
+ uint32_t start = us_ticker_read();
+ while ((us_ticker_read() - start) < (uint32_t)us);
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/common/retarget.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/common/retarget.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,783 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "platform.h"
+#include "FileHandle.h"
+#include "FileSystemLike.h"
+#include "FilePath.h"
+#include "serial_api.h"
+#include "toolchain.h"
+#include "semihost_api.h"
+#include "mbed_interface.h"
+#include "SingletonPtr.h"
+#include "PlatformMutex.h"
+#include "mbed_error.h"
+#include "mbed_stats.h"
+#include <stdlib.h>
+#include <string.h>
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#endif
+#include <errno.h>
+
+#if defined(__ARMCC_VERSION)
+# include <rt_sys.h>
+# define PREFIX(x) _sys##x
+# define OPEN_MAX _SYS_OPEN
+# ifdef __MICROLIB
+# pragma import(__use_full_stdio)
+# endif
+
+#elif defined(__ICCARM__)
+# include <yfuns.h>
+# define PREFIX(x) _##x
+# define OPEN_MAX 16
+
+# define STDIN_FILENO 0
+# define STDOUT_FILENO 1
+# define STDERR_FILENO 2
+
+#else
+# include <sys/stat.h>
+# include <sys/unistd.h>
+# include <sys/syslimits.h>
+# define PREFIX(x) x
+#endif
+
+#define FILE_HANDLE_RESERVED 0xFFFFFFFF
+
+using namespace mbed;
+
+#if defined(__MICROLIB) && (__ARMCC_VERSION>5030000)
+// Before version 5.03, we were using a patched version of microlib with proper names
+extern const char __stdin_name[] = ":tt";
+extern const char __stdout_name[] = ":tt";
+extern const char __stderr_name[] = ":tt";
+
+#else
+extern const char __stdin_name[] = "/stdin";
+extern const char __stdout_name[] = "/stdout";
+extern const char __stderr_name[] = "/stderr";
+#endif
+
+// Heap limits - only used if set
+unsigned char *mbed_heap_start = 0;
+uint32_t mbed_heap_size = 0;
+
+/* newlib has the filehandle field in the FILE struct as a short, so
+ * we can't just return a Filehandle* from _open and instead have to
+ * put it in a filehandles array and return the index into that array
+ * (or rather index+3, as filehandles 0-2 are stdin/out/err).
+ */
+static FileHandle *filehandles[OPEN_MAX];
+static SingletonPtr<PlatformMutex> filehandle_mutex;
+
+FileHandle::~FileHandle() {
+ filehandle_mutex->lock();
+ /* Remove all open filehandles for this */
+ for (unsigned int fh_i = 0; fh_i < sizeof(filehandles)/sizeof(*filehandles); fh_i++) {
+ if (filehandles[fh_i] == this) {
+ filehandles[fh_i] = NULL;
+ }
+ }
+ filehandle_mutex->unlock();
+}
+
+#if DEVICE_SERIAL
+extern int stdio_uart_inited;
+extern serial_t stdio_uart;
+#if MBED_CONF_CORE_STDIO_CONVERT_NEWLINES
+static char stdio_in_prev;
+static char stdio_out_prev;
+#endif
+#endif
+
+static void init_serial() {
+#if DEVICE_SERIAL
+ if (stdio_uart_inited) return;
+ serial_init(&stdio_uart, STDIO_UART_TX, STDIO_UART_RX);
+#if MBED_CONF_CORE_STDIO_BAUD_RATE
+ serial_baud(&stdio_uart, MBED_CONF_CORE_STDIO_BAUD_RATE);
+#endif
+#endif
+}
+
+static inline int openmode_to_posix(int openmode) {
+ int posix = openmode;
+#ifdef __ARMCC_VERSION
+ if (openmode & OPEN_PLUS) {
+ posix = O_RDWR;
+ } else if(openmode & OPEN_W) {
+ posix = O_WRONLY;
+ } else if(openmode & OPEN_A) {
+ posix = O_WRONLY|O_APPEND;
+ } else {
+ posix = O_RDONLY;
+ }
+ /* a, w, a+, w+ all create if file does not already exist */
+ if (openmode & (OPEN_A|OPEN_W)) {
+ posix |= O_CREAT;
+ }
+ /* w and w+ truncate */
+ if (openmode & OPEN_W) {
+ posix |= O_TRUNC;
+ }
+#elif defined(__ICCARM__)
+ switch (openmode & _LLIO_RDWRMASK) {
+ case _LLIO_RDONLY: posix = O_RDONLY; break;
+ case _LLIO_WRONLY: posix = O_WRONLY; break;
+ case _LLIO_RDWR : posix = O_RDWR ; break;
+ }
+ if (openmode & _LLIO_CREAT ) posix |= O_CREAT;
+ if (openmode & _LLIO_APPEND) posix |= O_APPEND;
+ if (openmode & _LLIO_TRUNC ) posix |= O_TRUNC;
+#elif defined(TOOLCHAIN_GCC)
+ posix &= ~O_BINARY;
+#endif
+ return posix;
+}
+
+extern "C" FILEHANDLE PREFIX(_open)(const char* name, int openmode) {
+ #if defined(__MICROLIB) && (__ARMCC_VERSION>5030000)
+ // Before version 5.03, we were using a patched version of microlib with proper names
+ // This is the workaround that the microlib author suggested us
+ static int n = 0;
+ if (!std::strcmp(name, ":tt")) return n++;
+
+ #else
+ /* Use the posix convention that stdin,out,err are filehandles 0,1,2.
+ */
+ if (std::strcmp(name, __stdin_name) == 0) {
+ init_serial();
+ return 0;
+ } else if (std::strcmp(name, __stdout_name) == 0) {
+ init_serial();
+ return 1;
+ } else if (std::strcmp(name, __stderr_name) == 0) {
+ init_serial();
+ return 2;
+ }
+ #endif
+
+ // find the first empty slot in filehandles
+ filehandle_mutex->lock();
+ unsigned int fh_i;
+ for (fh_i = 0; fh_i < sizeof(filehandles)/sizeof(*filehandles); fh_i++) {
+ if (filehandles[fh_i] == NULL) break;
+ }
+ if (fh_i >= sizeof(filehandles)/sizeof(*filehandles)) {
+ filehandle_mutex->unlock();
+ return -1;
+ }
+ filehandles[fh_i] = (FileHandle*)FILE_HANDLE_RESERVED;
+ filehandle_mutex->unlock();
+
+ FileHandle *res;
+
+ /* FILENAME: ":0x12345678" describes a FileLike* */
+ if (name[0] == ':') {
+ void *p;
+ sscanf(name, ":%p", &p);
+ res = (FileHandle*)p;
+
+ /* FILENAME: "/file_system/file_name" */
+ } else {
+ FilePath path(name);
+
+ if (!path.exists()) {
+ // Free file handle
+ filehandles[fh_i] = NULL;
+ return -1;
+ } else if (path.isFile()) {
+ res = path.file();
+ } else {
+ FileSystemLike *fs = path.fileSystem();
+ if (fs == NULL) {
+ // Free file handle
+ filehandles[fh_i] = NULL;
+ return -1;
+ }
+ int posix_mode = openmode_to_posix(openmode);
+ res = fs->open(path.fileName(), posix_mode); /* NULL if fails */
+ }
+ }
+
+ if (res == NULL) {
+ // Free file handle
+ filehandles[fh_i] = NULL;
+ return -1;
+ }
+ filehandles[fh_i] = res;
+
+ return fh_i + 3; // +3 as filehandles 0-2 are stdin/out/err
+}
+
+extern "C" int PREFIX(_close)(FILEHANDLE fh) {
+ if (fh < 3) return 0;
+
+ FileHandle* fhc = filehandles[fh-3];
+ filehandles[fh-3] = NULL;
+ if (fhc == NULL) return -1;
+
+ return fhc->close();
+}
+
+#if defined(__ICCARM__)
+extern "C" size_t __write (int fh, const unsigned char *buffer, size_t length) {
+#else
+extern "C" int PREFIX(_write)(FILEHANDLE fh, const unsigned char *buffer, unsigned int length, int mode) {
+#endif
+ int n; // n is the number of bytes written
+ if (fh < 3) {
+#if DEVICE_SERIAL
+ if (!stdio_uart_inited) init_serial();
+#if MBED_CONF_CORE_STDIO_CONVERT_NEWLINES
+ for (unsigned int i = 0; i < length; i++) {
+ if (buffer[i] == '\n' && stdio_out_prev != '\r') {
+ serial_putc(&stdio_uart, '\r');
+ }
+ serial_putc(&stdio_uart, buffer[i]);
+ stdio_out_prev = buffer[i];
+ }
+#else
+ for (unsigned int i = 0; i < length; i++) {
+ serial_putc(&stdio_uart, buffer[i]);
+ }
+#endif
+#endif
+ n = length;
+ } else {
+ FileHandle* fhc = filehandles[fh-3];
+ if (fhc == NULL) return -1;
+
+ n = fhc->write(buffer, length);
+ }
+#ifdef __ARMCC_VERSION
+ return length-n;
+#else
+ return n;
+#endif
+}
+
+#if defined(__ICCARM__)
+extern "C" size_t __read (int fh, unsigned char *buffer, size_t length) {
+#else
+extern "C" int PREFIX(_read)(FILEHANDLE fh, unsigned char *buffer, unsigned int length, int mode) {
+#endif
+ int n; // n is the number of bytes read
+ if (fh < 3) {
+ // only read a character at a time from stdin
+#if DEVICE_SERIAL
+ if (!stdio_uart_inited) init_serial();
+#if MBED_CONF_CORE_STDIO_CONVERT_NEWLINES
+ while (true) {
+ char c = serial_getc(&stdio_uart);
+ if ((c == '\r' && stdio_in_prev != '\n') ||
+ (c == '\n' && stdio_in_prev != '\r')) {
+ stdio_in_prev = c;
+ *buffer = '\n';
+ break;
+ } else if ((c == '\r' && stdio_in_prev == '\n') ||
+ (c == '\n' && stdio_in_prev == '\r')) {
+ stdio_in_prev = c;
+ // onto next character
+ continue;
+ } else {
+ stdio_in_prev = c;
+ *buffer = c;
+ break;
+ }
+ }
+#else
+ *buffer = serial_getc(&stdio_uart);
+#endif
+#endif
+ n = 1;
+ } else {
+ FileHandle* fhc = filehandles[fh-3];
+ if (fhc == NULL) return -1;
+
+ n = fhc->read(buffer, length);
+ }
+#ifdef __ARMCC_VERSION
+ return length-n;
+#else
+ return n;
+#endif
+}
+
+#ifdef __ARMCC_VERSION
+extern "C" int PREFIX(_istty)(FILEHANDLE fh)
+#else
+extern "C" int _isatty(FILEHANDLE fh)
+#endif
+{
+ /* stdin, stdout and stderr should be tty */
+ if (fh < 3) return 1;
+
+ FileHandle* fhc = filehandles[fh-3];
+ if (fhc == NULL) return -1;
+
+ return fhc->isatty();
+}
+
+extern "C"
+#if defined(__ARMCC_VERSION)
+int _sys_seek(FILEHANDLE fh, long position)
+#elif defined(__ICCARM__)
+long __lseek(int fh, long offset, int whence)
+#else
+int _lseek(FILEHANDLE fh, int offset, int whence)
+#endif
+{
+ if (fh < 3) return 0;
+
+ FileHandle* fhc = filehandles[fh-3];
+ if (fhc == NULL) return -1;
+
+#if defined(__ARMCC_VERSION)
+ return fhc->lseek(position, SEEK_SET);
+#else
+ return fhc->lseek(offset, whence);
+#endif
+}
+
+#ifdef __ARMCC_VERSION
+extern "C" int PREFIX(_ensure)(FILEHANDLE fh) {
+ if (fh < 3) return 0;
+
+ FileHandle* fhc = filehandles[fh-3];
+ if (fhc == NULL) return -1;
+
+ return fhc->fsync();
+}
+
+extern "C" long PREFIX(_flen)(FILEHANDLE fh) {
+ if (fh < 3) return 0;
+
+ FileHandle* fhc = filehandles[fh-3];
+ if (fhc == NULL) return -1;
+
+ return fhc->flen();
+}
+#endif
+
+
+#if !defined(__ARMCC_VERSION) && !defined(__ICCARM__)
+extern "C" int _fstat(int fd, struct stat *st) {
+ if ((STDOUT_FILENO == fd) || (STDERR_FILENO == fd) || (STDIN_FILENO == fd)) {
+ st->st_mode = S_IFCHR;
+ return 0;
+ }
+
+ errno = EBADF;
+ return -1;
+}
+#endif
+
+namespace std {
+extern "C" int remove(const char *path) {
+ FilePath fp(path);
+ FileSystemLike *fs = fp.fileSystem();
+ if (fs == NULL) return -1;
+
+ return fs->remove(fp.fileName());
+}
+
+extern "C" int rename(const char *oldname, const char *newname) {
+ FilePath fpOld(oldname);
+ FilePath fpNew(newname);
+ FileSystemLike *fsOld = fpOld.fileSystem();
+ FileSystemLike *fsNew = fpNew.fileSystem();
+
+ /* rename only if both files are on the same FS */
+ if (fsOld != fsNew || fsOld == NULL) return -1;
+
+ return fsOld->rename(fpOld.fileName(), fpNew.fileName());
+}
+
+extern "C" char *tmpnam(char *s) {
+ return NULL;
+}
+
+extern "C" FILE *tmpfile() {
+ return NULL;
+}
+} // namespace std
+
+#ifdef __ARMCC_VERSION
+extern "C" char *_sys_command_string(char *cmd, int len) {
+ return NULL;
+}
+#endif
+
+extern "C" DIR *opendir(const char *path) {
+ /* root dir is FileSystemLike */
+ if (path[0] == '/' && path[1] == 0) {
+ return FileSystemLike::opendir();
+ }
+
+ FilePath fp(path);
+ FileSystemLike* fs = fp.fileSystem();
+ if (fs == NULL) return NULL;
+
+ return fs->opendir(fp.fileName());
+}
+
+extern "C" struct dirent *readdir(DIR *dir) {
+ return dir->readdir();
+}
+
+extern "C" int closedir(DIR *dir) {
+ return dir->closedir();
+}
+
+extern "C" void rewinddir(DIR *dir) {
+ dir->rewinddir();
+}
+
+extern "C" off_t telldir(DIR *dir) {
+ return dir->telldir();
+}
+
+extern "C" void seekdir(DIR *dir, off_t off) {
+ dir->seekdir(off);
+}
+
+extern "C" int mkdir(const char *path, mode_t mode) {
+ FilePath fp(path);
+ FileSystemLike *fs = fp.fileSystem();
+ if (fs == NULL) return -1;
+
+ return fs->mkdir(fp.fileName(), mode);
+}
+
+#if defined(TOOLCHAIN_GCC)
+/* prevents the exception handling name demangling code getting pulled in */
+#include "mbed_error.h"
+namespace __gnu_cxx {
+ void __verbose_terminate_handler() {
+ error("Exception");
+ }
+}
+extern "C" WEAK void __cxa_pure_virtual(void);
+extern "C" WEAK void __cxa_pure_virtual(void) {
+ exit(1);
+}
+
+#endif
+
+#if defined(TOOLCHAIN_GCC)
+
+#ifdef FEATURE_UVISOR
+#include "uvisor-lib/uvisor-lib.h"
+#endif/* FEATURE_UVISOR */
+
+
+extern "C" WEAK void software_init_hook_rtos(void)
+{
+ // Do nothing by default.
+}
+
+extern "C" void software_init_hook(void)
+{
+#ifdef FEATURE_UVISOR
+ int return_code;
+
+ return_code = uvisor_lib_init();
+ if (return_code) {
+ mbed_die();
+ }
+#endif/* FEATURE_UVISOR */
+
+ software_init_hook_rtos();
+}
+#endif
+
+// ****************************************************************************
+// mbed_main is a function that is called before main()
+// mbed_sdk_init() is also a function that is called before main(), but unlike
+// mbed_main(), it is not meant for user code, but for the SDK itself to perform
+// initializations before main() is called.
+
+extern "C" WEAK void mbed_main(void);
+extern "C" WEAK void mbed_main(void) {
+}
+
+extern "C" WEAK void mbed_sdk_init(void);
+extern "C" WEAK void mbed_sdk_init(void) {
+}
+
+#if defined(TOOLCHAIN_ARM)
+extern "C" int $Super$$main(void);
+
+extern "C" int $Sub$$main(void) {
+ mbed_sdk_init();
+ mbed_main();
+ return $Super$$main();
+}
+#elif defined(TOOLCHAIN_GCC)
+extern "C" int __real_main(void);
+
+extern "C" int __wrap_main(void) {
+ mbed_sdk_init();
+ mbed_main();
+ return __real_main();
+}
+#elif defined(TOOLCHAIN_IAR)
+// IAR doesn't have the $Super/$Sub mechanism of armcc, nor something equivalent
+// to ld's --wrap. It does have a --redirect, but that doesn't help, since redirecting
+// 'main' to another symbol looses the original 'main' symbol. However, its startup
+// code will call a function to setup argc and argv (__iar_argc_argv) if it is defined.
+// Since mbed doesn't use argc/argv, we use this function to call our mbed_main.
+extern "C" void __iar_argc_argv() {
+ mbed_main();
+}
+#endif
+
+// Provide implementation of _sbrk (low-level dynamic memory allocation
+// routine) for GCC_ARM which compares new heap pointer with MSP instead of
+// SP. This make it compatible with RTX RTOS thread stacks.
+#if defined(TOOLCHAIN_GCC_ARM) || defined(TOOLCHAIN_GCC_CR)
+// Linker defined symbol used by _sbrk to indicate where heap should start.
+extern "C" int __end__;
+
+#if defined(TARGET_CORTEX_A)
+extern "C" uint32_t __HeapLimit;
+#endif
+
+// Turn off the errno macro and use actual global variable instead.
+#undef errno
+extern "C" int errno;
+
+// For ARM7 only
+register unsigned char * stack_ptr __asm ("sp");
+
+// Dynamic memory allocation related syscall.
+#if defined(TARGET_NUMAKER_PFM_NUC472)
+// Overwrite _sbrk() to support two region model.
+extern "C" void *__wrap__sbrk(int incr);
+extern "C" caddr_t _sbrk(int incr) {
+ return (caddr_t) __wrap__sbrk(incr);
+}
+#else
+extern "C" caddr_t _sbrk(int incr) {
+ static unsigned char* heap = (unsigned char*)&__end__;
+ unsigned char* prev_heap = heap;
+ unsigned char* new_heap = heap + incr;
+
+#if defined(TARGET_ARM7)
+ if (new_heap >= stack_ptr) {
+#elif defined(TARGET_CORTEX_A)
+ if (new_heap >= (unsigned char*)&__HeapLimit) { /* __HeapLimit is end of heap section */
+#else
+ if (new_heap >= (unsigned char*)__get_MSP()) {
+#endif
+ errno = ENOMEM;
+ return (caddr_t)-1;
+ }
+
+ // Additional heap checking if set
+ if (mbed_heap_size && (new_heap >= mbed_heap_start + mbed_heap_size)) {
+ errno = ENOMEM;
+ return (caddr_t)-1;
+ }
+
+ heap = new_heap;
+ return (caddr_t) prev_heap;
+}
+#endif
+#endif
+
+#if defined(TOOLCHAIN_GCC_ARM) || defined(TOOLCHAIN_GCC_CR)
+extern "C" void _exit(int return_code) {
+#else
+namespace std {
+extern "C" void exit(int return_code) {
+#endif
+
+#if DEVICE_STDIO_MESSAGES
+ fflush(stdout);
+ fflush(stderr);
+#endif
+
+#if DEVICE_SEMIHOST
+ if (mbed_interface_connected()) {
+ semihost_exit();
+ }
+#endif
+ if (return_code) {
+ mbed_die();
+ }
+
+ while (1);
+}
+
+#if !defined(TOOLCHAIN_GCC_ARM) && !defined(TOOLCHAIN_GCC_CR)
+} //namespace std
+#endif
+
+
+namespace mbed {
+
+void mbed_set_unbuffered_stream(FILE *_file) {
+#if defined (__ICCARM__)
+ char buf[2];
+ std::setvbuf(_file,buf,_IONBF,NULL);
+#else
+ setbuf(_file, NULL);
+#endif
+}
+
+int mbed_getc(FILE *_file){
+#if defined (__ICCARM__)
+ /*This is only valid for unbuffered streams*/
+ int res = std::fgetc(_file);
+ if (res>=0){
+ _file->_Mode = (unsigned short)(_file->_Mode & ~ 0x1000);/* Unset read mode */
+ _file->_Rend = _file->_Wend;
+ _file->_Next = _file->_Wend;
+ }
+ return res;
+#else
+ return std::fgetc(_file);
+#endif
+}
+
+char* mbed_gets(char*s, int size, FILE *_file){
+#if defined (__ICCARM__)
+ /*This is only valid for unbuffered streams*/
+ char *str = fgets(s,size,_file);
+ if (str!=NULL){
+ _file->_Mode = (unsigned short)(_file->_Mode & ~ 0x1000);/* Unset read mode */
+ _file->_Rend = _file->_Wend;
+ _file->_Next = _file->_Wend;
+ }
+ return str;
+#else
+ return std::fgets(s,size,_file);
+#endif
+}
+
+} // namespace mbed
+
+#if defined (__ICCARM__)
+// Stub out locks when an rtos is not present
+extern "C" WEAK void __iar_system_Mtxinit(__iar_Rmtx *mutex) {}
+extern "C" WEAK void __iar_system_Mtxdst(__iar_Rmtx *mutex) {}
+extern "C" WEAK void __iar_system_Mtxlock(__iar_Rmtx *mutex) {}
+extern "C" WEAK void __iar_system_Mtxunlock(__iar_Rmtx *mutex) {}
+extern "C" WEAK void __iar_file_Mtxinit(__iar_Rmtx *mutex) {}
+extern "C" WEAK void __iar_file_Mtxdst(__iar_Rmtx *mutex) {}
+extern "C" WEAK void __iar_file_Mtxlock(__iar_Rmtx *mutex) {}
+extern "C" WEAK void __iar_file_Mtxunlock(__iar_Rmtx *mutex) {}
+#elif defined(__CC_ARM)
+// Do nothing
+#elif defined (__GNUC__)
+struct _reent;
+// Stub out locks when an rtos is not present
+extern "C" WEAK void __rtos_malloc_lock( struct _reent *_r ) {}
+extern "C" WEAK void __rtos_malloc_unlock( struct _reent *_r ) {}
+extern "C" WEAK void __rtos_env_lock( struct _reent *_r ) {}
+extern "C" WEAK void __rtos_env_unlock( struct _reent *_r ) {}
+
+extern "C" void __malloc_lock( struct _reent *_r )
+{
+ __rtos_malloc_lock(_r);
+}
+
+extern "C" void __malloc_unlock( struct _reent *_r )
+{
+ __rtos_malloc_unlock(_r);
+}
+
+extern "C" void __env_lock( struct _reent *_r )
+{
+ __rtos_env_lock(_r);
+}
+
+extern "C" void __env_unlock( struct _reent *_r )
+{
+ __rtos_env_unlock(_r);
+}
+
+#define CXA_GUARD_INIT_DONE (1 << 0)
+#define CXA_GUARD_INIT_IN_PROGRESS (1 << 1)
+#define CXA_GUARD_MASK (CXA_GUARD_INIT_DONE | CXA_GUARD_INIT_IN_PROGRESS)
+
+extern "C" int __cxa_guard_acquire(int *guard_object_p)
+{
+ uint8_t *guard_object = (uint8_t *)guard_object_p;
+ if (CXA_GUARD_INIT_DONE == (*guard_object & CXA_GUARD_MASK)) {
+ return 0;
+ }
+ singleton_lock();
+ if (CXA_GUARD_INIT_DONE == (*guard_object & CXA_GUARD_MASK)) {
+ singleton_unlock();
+ return 0;
+ }
+ MBED_ASSERT(0 == (*guard_object & CXA_GUARD_MASK));
+ *guard_object = *guard_object | CXA_GUARD_INIT_IN_PROGRESS;
+ return 1;
+}
+
+extern "C" void __cxa_guard_release(int *guard_object_p)
+{
+ uint8_t *guard_object = (uint8_t *)guard_object_p;
+ MBED_ASSERT(CXA_GUARD_INIT_IN_PROGRESS == (*guard_object & CXA_GUARD_MASK));
+ *guard_object = (*guard_object & ~CXA_GUARD_MASK) | CXA_GUARD_INIT_DONE;
+ singleton_unlock();
+}
+
+extern "C" void __cxa_guard_abort(int *guard_object_p)
+{
+ uint8_t *guard_object = (uint8_t *)guard_object_p;
+ MBED_ASSERT(CXA_GUARD_INIT_IN_PROGRESS == (*guard_object & CXA_GUARD_MASK));
+ *guard_object = *guard_object & ~CXA_GUARD_INIT_IN_PROGRESS;
+ singleton_unlock();
+}
+
+#endif
+
+void *operator new(std::size_t count)
+{
+ void *buffer = malloc(count);
+ if (NULL == buffer) {
+ error("Operator new out of memory\r\n");
+ }
+ return buffer;
+}
+
+void *operator new[](std::size_t count)
+{
+ void *buffer = malloc(count);
+ if (NULL == buffer) {
+ error("Operator new[] out of memory\r\n");
+ }
+ return buffer;
+}
+
+void operator delete(void *ptr)
+{
+ if (ptr != NULL) {
+ free(ptr);
+ }
+}
+void operator delete[](void *ptr)
+{
+ if (ptr != NULL) {
+ free(ptr);
+ }
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/analogin_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/analogin_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_API_H
+#define MBED_ANALOGIN_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Analogin hal structure. analogin_s is declared in the target's hal
+ */
+typedef struct analogin_s analogin_t;
+
+/**
+ * \defgroup hal_analogin Analogin hal functions
+ * @{
+ */
+
+/** Initialize the analogin peripheral
+ *
+ * Configures the pin used by analogin.
+ * @param obj The analogin object to initialize
+ * @param pin The analogin pin name
+ */
+void analogin_init(analogin_t *obj, PinName pin);
+
+/** Read the input voltage, represented as a float in the range [0.0, 1.0]
+ *
+ * @param obj The analogin object
+ * @return A floating value representing the current input voltage
+ */
+float analogin_read(analogin_t *obj);
+
+/** Read the value from analogin pin, represented as an unsigned 16bit value
+ *
+ * @param obj The analogin object
+ * @return An unsigned 16bit value representing the current input voltage
+ */
+uint16_t analogin_read_u16(analogin_t *obj);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/analogout_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/analogout_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,88 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_API_H
+#define MBED_ANALOGOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Analogout hal structure. dac_s is declared in the target's hal
+ */
+typedef struct dac_s dac_t;
+
+/**
+ * \defgroup hal_analogout Analogout hal functions
+ * @{
+ */
+
+/** Initialize the analogout peripheral
+ *
+ * Configures the pin used by analogout.
+ * @param obj The analogout object to initialize
+ * @param pin The analogout pin name
+ */
+void analogout_init(dac_t *obj, PinName pin);
+
+/** Release the analogout object
+ *
+ * Note: This is not currently used in the mbed-drivers
+ * @param obj The analogout object
+ */
+void analogout_free(dac_t *obj);
+
+/** Set the output voltage, specified as a percentage (float)
+ *
+ * @param obj The analogin object
+ * @param value The floating-point output voltage to be set
+ */
+void analogout_write(dac_t *obj, float value);
+
+/** Set the output voltage, specified as unsigned 16-bit
+ *
+ * @param obj The analogin object
+ * @param value The unsigned 16-bit output voltage to be set
+ */
+void analogout_write_u16(dac_t *obj, uint16_t value);
+
+/** Read the current voltage value on the pin
+ *
+ * @param obj The analogin object
+ * @return A floating-point value representing the current voltage on the pin,
+ * measured as a percentage
+ */
+float analogout_read(dac_t *obj);
+
+/** Read the current voltage value on the pin, as a normalized unsigned 16bit value
+ *
+ * @param obj The analogin object
+ * @return An unsigned 16-bit value representing the current voltage on the pin
+ */
+uint16_t analogout_read_u16(dac_t *obj);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/buffer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/buffer.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,30 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUFFER_H
+#define MBED_BUFFER_H
+
+#include <stddef.h>
+
+/** Generic buffer structure
+ */
+typedef struct buffer_s {
+ void *buffer; /**< the pointer to a buffer */
+ size_t length; /**< the buffer length */
+ size_t pos; /**< actual buffer position */
+ uint8_t width; /**< The buffer unit width (8, 16, 32, 64), used for proper *buffer casting */
+} buffer_t;
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/can_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/can_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,80 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_API_H
+#define MBED_CAN_API_H
+
+#include "device.h"
+
+#if DEVICE_CAN
+
+#include "PinNames.h"
+#include "PeripheralNames.h"
+#include "can_helper.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ IRQ_RX,
+ IRQ_TX,
+ IRQ_ERROR,
+ IRQ_OVERRUN,
+ IRQ_WAKEUP,
+ IRQ_PASSIVE,
+ IRQ_ARB,
+ IRQ_BUS,
+ IRQ_READY
+} CanIrqType;
+
+
+typedef enum {
+ MODE_RESET,
+ MODE_NORMAL,
+ MODE_SILENT,
+ MODE_TEST_LOCAL,
+ MODE_TEST_GLOBAL,
+ MODE_TEST_SILENT
+} CanMode;
+
+typedef void (*can_irq_handler)(uint32_t id, CanIrqType type);
+
+typedef struct can_s can_t;
+
+void can_init (can_t *obj, PinName rd, PinName td);
+void can_free (can_t *obj);
+int can_frequency(can_t *obj, int hz);
+
+void can_irq_init (can_t *obj, can_irq_handler handler, uint32_t id);
+void can_irq_free (can_t *obj);
+void can_irq_set (can_t *obj, CanIrqType irq, uint32_t enable);
+
+int can_write (can_t *obj, CAN_Message, int cc);
+int can_read (can_t *obj, CAN_Message *msg, int handle);
+int can_mode (can_t *obj, CanMode mode);
+int can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle);
+void can_reset (can_t *obj);
+unsigned char can_rderror (can_t *obj);
+unsigned char can_tderror (can_t *obj);
+void can_monitor (can_t *obj, int silent);
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif // MBED_CAN_API_H
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/dma_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/dma_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DMA_API_H
+#define MBED_DMA_API_H
+
+#include <stdint.h>
+
+#define DMA_ERROR_OUT_OF_CHANNELS (-1)
+
+typedef enum {
+ DMA_USAGE_NEVER,
+ DMA_USAGE_OPPORTUNISTIC,
+ DMA_USAGE_ALWAYS,
+ DMA_USAGE_TEMPORARY_ALLOCATED,
+ DMA_USAGE_ALLOCATED
+} DMAUsage;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void dma_init(void);
+
+int dma_channel_allocate(uint32_t capabilities);
+
+int dma_channel_free(int channelid);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/ethernet_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/ethernet_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,63 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_API_H
+#define MBED_ETHERNET_API_H
+
+#include "device.h"
+
+#if DEVICE_ETHERNET
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Connection constants
+
+int ethernet_init(void);
+void ethernet_free(void);
+
+// write size bytes from data to ethernet buffer
+// return num bytes written
+// or -1 if size is too big
+int ethernet_write(const char *data, int size);
+
+// send ethernet write buffer, returning the packet size sent
+int ethernet_send(void);
+
+// recieve from ethernet buffer, returning packet size, or 0 if no packet
+int ethernet_receive(void);
+
+// read size bytes in to data, return actual num bytes read (0..size)
+// if data == NULL, throw the bytes away
+int ethernet_read(char *data, int size);
+
+// get the ethernet address
+void ethernet_address(char *mac);
+
+// see if the link is up
+int ethernet_link(void);
+
+// force link settings
+void ethernet_set_link(int speed, int duplex);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/gpio_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/gpio_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,128 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_API_H
+#define MBED_GPIO_API_H
+
+#include <stdint.h>
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup hal_gpio GPIO HAL functions
+ * @{
+ */
+
+/** Set the given pin as GPIO
+ *
+ * @param pin The pin to be set as GPIO
+ * @return The GPIO port mask for this pin
+ **/
+uint32_t gpio_set(PinName pin);
+/* Checks if gpio object is connected (pin was not initialized with NC)
+ * @param pin The pin to be set as GPIO
+ * @return 0 if port is initialized with NC
+ **/
+int gpio_is_connected(const gpio_t *obj);
+
+/** Initialize the GPIO pin
+ *
+ * @param obj The GPIO object to initialize
+ * @param pin The GPIO pin to initialize
+ */
+void gpio_init(gpio_t *obj, PinName pin);
+
+/** Set the input pin mode
+ *
+ * @param obj The GPIO object
+ * @param mode The pin mode to be set
+ */
+void gpio_mode(gpio_t *obj, PinMode mode);
+
+/** Set the pin direction
+ *
+ * @param obj The GPIO object
+ * @param direction The pin direction to be set
+ */
+void gpio_dir(gpio_t *obj, PinDirection direction);
+
+/** Set the output value
+ *
+ * @param obj The GPIO object
+ * @param value The value to be set
+ */
+void gpio_write(gpio_t *obj, int value);
+
+/** Read the input value
+ *
+ * @param obj The GPIO object
+ * @return An integer value 1 or 0
+ */
+int gpio_read(gpio_t *obj);
+
+// the following functions are generic and implemented in the common gpio.c file
+// TODO: fix, will be moved to the common gpio header file
+
+/** Init the input pin and set mode to PullDefault
+ *
+ * @param obj The GPIO object
+ * @param pin The pin name
+ */
+void gpio_init_in(gpio_t* gpio, PinName pin);
+
+/** Init the input pin and set the mode
+ *
+ * @param obj The GPIO object
+ * @param pin The pin name
+ * @param mode The pin mode to be set
+ */
+void gpio_init_in_ex(gpio_t* gpio, PinName pin, PinMode mode);
+
+/** Init the output pin as an output, with predefined output value 0
+ *
+ * @param obj The GPIO object
+ * @param pin The pin name
+ * @return An integer value 1 or 0
+ */
+void gpio_init_out(gpio_t* gpio, PinName pin);
+
+/** Init the pin as an output and set the output value
+ *
+ * @param obj The GPIO object
+ * @param pin The pin name
+ * @param value The value to be set
+ */
+void gpio_init_out_ex(gpio_t* gpio, PinName pin, int value);
+
+/** Init the pin to be in/out
+ *
+ * @param obj The GPIO object
+ * @param pin The pin name
+ * @param direction The pin direction to be set
+ * @param mode The pin mode to be set
+ * @param value The value to be set for an output pin
+ */
+void gpio_init_inout(gpio_t* gpio, PinName pin, PinDirection direction, PinMode mode, int value);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/gpio_irq_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/gpio_irq_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,92 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_IRQ_API_H
+#define MBED_GPIO_IRQ_API_H
+
+#include "device.h"
+
+#if DEVICE_INTERRUPTIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** GPIO IRQ events
+ */
+typedef enum {
+ IRQ_NONE,
+ IRQ_RISE,
+ IRQ_FALL
+} gpio_irq_event;
+
+/** GPIO IRQ HAL structure. gpio_irq_s is declared in the target's HAL
+ */
+typedef struct gpio_irq_s gpio_irq_t;
+
+typedef void (*gpio_irq_handler)(uint32_t id, gpio_irq_event event);
+
+/**
+ * \defgroup hal_gpioirq GPIO IRQ HAL functions
+ * @{
+ */
+
+/** Initialize the GPIO IRQ pin
+ *
+ * @param obj The GPIO object to initialize
+ * @param pin The GPIO pin name
+ * @param handler The handler to be attached to GPIO IRQ
+ * @param id The object ID (id != 0, 0 is reserved)
+ * @return -1 if pin is NC, 0 otherwise
+ */
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id);
+
+/** Release the GPIO IRQ PIN
+ *
+ * @param obj The gpio object
+ */
+void gpio_irq_free(gpio_irq_t *obj);
+
+/** Enable/disable pin IRQ event
+ *
+ * @param obj The GPIO object
+ * @param event The GPIO IRQ event
+ * @param enable The enable flag
+ */
+void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable);
+
+/** Enable GPIO IRQ
+ *
+ * This is target dependent, as it might enable the entire port or just a pin
+ * @param obj The GPIO object
+ */
+void gpio_irq_enable(gpio_irq_t *obj);
+
+/** Disable GPIO IRQ
+ *
+ * This is target dependent, as it might disable the entire port or just a pin
+ * @param obj The GPIO object
+ */
+void gpio_irq_disable(gpio_irq_t *obj);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/i2c_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/i2c_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,241 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_API_H
+#define MBED_I2C_API_H
+
+#include "device.h"
+#include "buffer.h"
+
+#if DEVICE_I2C_ASYNCH
+#include "dma_api.h"
+#endif
+
+#if DEVICE_I2C
+
+/**
+ * @defgroup hal_I2CEvents I2C Events Macros
+ *
+ * @{
+ */
+#define I2C_EVENT_ERROR (1 << 1)
+#define I2C_EVENT_ERROR_NO_SLAVE (1 << 2)
+#define I2C_EVENT_TRANSFER_COMPLETE (1 << 3)
+#define I2C_EVENT_TRANSFER_EARLY_NACK (1 << 4)
+#define I2C_EVENT_ALL (I2C_EVENT_ERROR | I2C_EVENT_TRANSFER_COMPLETE | I2C_EVENT_ERROR_NO_SLAVE | I2C_EVENT_TRANSFER_EARLY_NACK)
+
+/**@}*/
+
+#if DEVICE_I2C_ASYNCH
+/** Asynch I2C HAL structure
+ */
+typedef struct {
+ struct i2c_s i2c; /**< Target specific I2C structure */
+ struct buffer_s tx_buff; /**< Tx buffer */
+ struct buffer_s rx_buff; /**< Rx buffer */
+} i2c_t;
+
+#else
+/** Non-asynch I2C HAL structure
+ */
+typedef struct i2c_s i2c_t;
+
+#endif
+
+enum {
+ I2C_ERROR_NO_SLAVE = -1,
+ I2C_ERROR_BUS_BUSY = -2
+};
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup hal_GeneralI2C I2C Configuration Functions
+ * @{
+ */
+
+/** Initialize the I2C peripheral. It sets the default parameters for I2C
+ * peripheral, and configures its specifieds pins.
+ *
+ * @param obj The I2C object
+ * @param sda The sda pin
+ * @param scl The scl pin
+ */
+void i2c_init(i2c_t *obj, PinName sda, PinName scl);
+
+/** Configure the I2C frequency
+ *
+ * @param obj The I2C object
+ * @param hz Frequency in Hz
+ */
+void i2c_frequency(i2c_t *obj, int hz);
+
+/** Send START command
+ *
+ * @param obj The I2C object
+ */
+int i2c_start(i2c_t *obj);
+
+/** Send STOP command
+ *
+ * @param obj The I2C object
+ */
+int i2c_stop(i2c_t *obj);
+
+/** Blocking reading data
+ *
+ * @param obj The I2C object
+ * @param address 7-bit address (last bit is 1)
+ * @param data The buffer for receiving
+ * @param length Number of bytes to read
+ * @param stop Stop to be generated after the transfer is done
+ * @return Number of read bytes
+ */
+int i2c_read(i2c_t *obj, int address, char *data, int length, int stop);
+
+/** Blocking sending data
+ *
+ * @param obj The I2C object
+ * @param address 7-bit address (last bit is 0)
+ * @param data The buffer for sending
+ * @param length Number of bytes to write
+ * @param stop Stop to be generated after the transfer is done
+ * @return Number of written bytes
+ */
+int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop);
+
+/** Reset I2C peripheral. TODO: The action here. Most of the implementation sends stop()
+ *
+ * @param obj The I2C object
+ */
+void i2c_reset(i2c_t *obj);
+
+/** Read one byte
+ *
+ * @param obj The I2C object
+ * @param last Acknoledge
+ * @return The read byte
+ */
+int i2c_byte_read(i2c_t *obj, int last);
+
+/** Write one byte
+ *
+ * @param obj The I2C object
+ * @param data Byte to be written
+ * @return 0 if NAK was received, 1 if ACK was received, 2 for timeout.
+ */
+int i2c_byte_write(i2c_t *obj, int data);
+
+/**@}*/
+
+#if DEVICE_I2CSLAVE
+
+/**
+ * \defgroup SynchI2C Synchronous I2C Hardware Abstraction Layer for slave
+ * @{
+ */
+
+/** Configure I2C as slave or master.
+ * @param obj The I2C object
+ * @return non-zero if a value is available
+ */
+void i2c_slave_mode(i2c_t *obj, int enable_slave);
+
+/** Check to see if the I2C slave has been addressed.
+ * @param obj The I2C object
+ * @return The status - 1 - read addresses, 2 - write to all slaves,
+ * 3 write addressed, 0 - the slave has not been addressed
+ */
+int i2c_slave_receive(i2c_t *obj);
+
+/** Configure I2C as slave or master.
+ * @param obj The I2C object
+ * @return non-zero if a value is available
+ */
+int i2c_slave_read(i2c_t *obj, char *data, int length);
+
+/** Configure I2C as slave or master.
+ * @param obj The I2C object
+ * @return non-zero if a value is available
+ */
+int i2c_slave_write(i2c_t *obj, const char *data, int length);
+
+/** Configure I2C address.
+ * @param obj The I2C object
+ * @param idx Currently not used
+ * @param address The address to be set
+ * @param mask Currently not used
+ */
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask);
+
+#endif
+
+/**@}*/
+
+#if DEVICE_I2C_ASYNCH
+
+/**
+ * \defgroup hal_AsynchI2C Asynchronous I2C Hardware Abstraction Layer
+ * @{
+ */
+
+/** Start I2C asynchronous transfer
+ *
+ * @param obj The I2C object
+ * @param tx The transmit buffer
+ * @param tx_length The number of bytes to transmit
+ * @param rx The receive buffer
+ * @param rx_length The number of bytes to receive
+ * @param address The address to be set - 7bit or 9bit
+ * @param stop If true, stop will be generated after the transfer is done
+ * @param handler The I2C IRQ handler to be set
+ * @param hint DMA hint usage
+ */
+void i2c_transfer_asynch(i2c_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint32_t address, uint32_t stop, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** The asynchronous IRQ handler
+ *
+ * @param obj The I2C object which holds the transfer information
+ * @return Event flags if a transfer termination condition was met, otherwise return 0.
+ */
+uint32_t i2c_irq_handler_asynch(i2c_t *obj);
+
+/** Attempts to determine if the I2C peripheral is already in use
+ *
+ * @param obj The I2C object
+ * @return Non-zero if the I2C module is active or zero if it is not
+ */
+uint8_t i2c_active(i2c_t *obj);
+
+/** Abort asynchronous transfer
+ *
+ * This function does not perform any check - that should happen in upper layers.
+ * @param obj The I2C object
+ */
+void i2c_abort_asynch(i2c_t *obj);
+
+#endif
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/lp_ticker_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/lp_ticker_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LPTICKER_API_H
+#define MBED_LPTICKER_API_H
+
+#include "device.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "ticker_api.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup hal_LpTicker Low Power Ticker Functions
+ * @{
+ */
+
+/** Get low power ticker's data
+ *
+ * @return The low power ticker data
+ */
+const ticker_data_t* get_lp_ticker_data(void);
+
+/** The wrapper for ticker_irq_handler, to pass lp ticker's data
+ *
+ */
+void lp_ticker_irq_handler(void);
+
+/* HAL lp ticker */
+
+/** Initialize the low power ticker
+ *
+ */
+void lp_ticker_init(void);
+
+/** Read the current counter
+ *
+ * @return The current timer's counter value in microseconds
+ */
+uint32_t lp_ticker_read(void);
+
+/** Set interrupt for specified timestamp
+ *
+ * @param timestamp The time in microseconds to be set
+ */
+void lp_ticker_set_interrupt(timestamp_t timestamp);
+
+/** Disable low power ticker interrupt
+ *
+ */
+void lp_ticker_disable_interrupt(void);
+
+/** Clear the low power ticker interrupt
+ *
+ */
+void lp_ticker_clear_interrupt(void);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/pinmap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/pinmap.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINMAP_H
+#define MBED_PINMAP_H
+
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ int peripheral;
+ int function;
+} PinMap;
+
+void pin_function(PinName pin, int function);
+void pin_mode (PinName pin, PinMode mode);
+
+uint32_t pinmap_peripheral(PinName pin, const PinMap* map);
+uint32_t pinmap_function(PinName pin, const PinMap* map);
+uint32_t pinmap_merge (uint32_t a, uint32_t b);
+void pinmap_pinout (PinName pin, const PinMap *map);
+uint32_t pinmap_find_peripheral(PinName pin, const PinMap* map);
+uint32_t pinmap_find_function(PinName pin, const PinMap* map);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/port_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/port_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,88 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTMAP_H
+#define MBED_PORTMAP_H
+
+#include "device.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Port HAL structure. port_s is declared in the target's HAL
+ */
+typedef struct port_s port_t;
+
+/**
+ * \defgroup hal_port Port HAL functions
+ * @{
+ */
+
+/** Get the pin name from the port's pin number
+ *
+ * @param port The port name
+ * @param pin_n The pin number within the specified port
+ * @return The pin name for the port's pin number
+ */
+PinName port_pin(PortName port, int pin_n);
+
+/** Initilize the port
+ *
+ * @param obj The port object to initialize
+ * @param port The port name
+ * @param mask The bitmask to identify which bits in the port should be included (0 - ignore)
+ * @param dir The port direction
+ */
+void port_init(port_t *obj, PortName port, int mask, PinDirection dir);
+
+/** Set the input port mode
+ *
+ * @param obj The port object
+ * @param mode THe port mode to be set
+ */
+void port_mode(port_t *obj, PinMode mode);
+
+/** Set port direction (in/out)
+ *
+ * @param obj The port object
+ * @param dir The port direction to be set
+ */
+void port_dir(port_t *obj, PinDirection dir);
+
+/** Write value to the port
+ *
+ * @param obj The port object
+ * @param value The value to be set
+ */
+void port_write(port_t *obj, int value);
+
+/** Read the current value on the port
+ *
+ * @param obj The port object
+ * @return An integer with each bit corresponding to an associated port pin setting
+ */
+int port_read(port_t *obj);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/pwmout_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/pwmout_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_API_H
+#define MBED_PWMOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_PWMOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Pwmout hal structure. pwmout_s is declared in the target's hal
+ */
+typedef struct pwmout_s pwmout_t;
+
+/**
+ * \defgroup hal_pwmout Pwmout hal functions
+ * @{
+ */
+
+/** Initialize the pwm out peripheral and configure the pin
+ *
+ * @param obj The pwmout object to initialize
+ * @param pin The pwmout pin to initialize
+ */
+void pwmout_init(pwmout_t *obj, PinName pin);
+
+/** Deinitialize the pwmout object
+ *
+ * @param obj The pwmout object
+ */
+void pwmout_free(pwmout_t *obj);
+
+/** Set the output duty-cycle in range <0.0f, 1.0f>
+ *
+ * Value 0.0f represents 0 percentage, 1.0f represents 100 percent.
+ * @param obj The pwmout object
+ * @param percent The floating-point percentage number
+ */
+void pwmout_write(pwmout_t *obj, float percent);
+
+/** Read the current float-point output duty-cycle
+ *
+ * @param obj The pwmout object
+ * @return A floating-point output duty-cycle
+ */
+float pwmout_read(pwmout_t *obj);
+
+/** Set the PWM period specified in seconds, keeping the duty cycle the same
+ *
+ * Periods smaller than microseconds (the lowest resolution) are set to zero.
+ * @param obj The pwmout object
+ * @param seconds The floating-point seconds period
+ */
+void pwmout_period(pwmout_t *obj, float seconds);
+
+/** Set the PWM period specified in miliseconds, keeping the duty cycle the same
+ *
+ * @param obj The pwmout object
+ * @param ms The milisecond period
+ */
+void pwmout_period_ms(pwmout_t *obj, int ms);
+
+/** Set the PWM period specified in microseconds, keeping the duty cycle the same
+ *
+ * @param obj The pwmout object
+ * @param us The microsecond period
+ */
+void pwmout_period_us(pwmout_t *obj, int us);
+
+/** Set the PWM pulsewidth specified in seconds, keeping the period the same.
+ *
+ * @param obj The pwmout object
+ * @param seconds The floating-point pulsewidth in seconds
+ */
+void pwmout_pulsewidth(pwmout_t *obj, float seconds);
+
+/** Set the PWM pulsewidth specified in miliseconds, keeping the period the same.
+ *
+ * @param obj The pwmout object
+ * @param ms The floating-point pulsewidth in miliseconds
+ */
+void pwmout_pulsewidth_ms(pwmout_t *obj, int ms);
+
+/** Set the PWM pulsewidth specified in microseconds, keeping the period the same.
+ *
+ * @param obj The pwmout object
+ * @param us The floating-point pulsewidth in microseconds
+ */
+void pwmout_pulsewidth_us(pwmout_t *obj, int us);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/rtc_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/rtc_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,72 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RTC_API_H
+#define MBED_RTC_API_H
+
+#include "device.h"
+
+#if DEVICE_RTC
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup hal_rtc RTC hal functions
+ * @{
+ */
+
+/** Initialize the RTC peripheral
+ *
+ */
+void rtc_init(void);
+
+/** Deinitialize RTC
+ *
+ * TODO: The function is not used by rtc api in mbed-drivers.
+ */
+void rtc_free(void);
+
+/** Get the RTC enable status
+ *
+ * @retval 0 disabled
+ * @retval 1 enabled
+ */
+int rtc_isenabled(void);
+
+/** Get the current time from the RTC peripheral
+ *
+ * @return The current time
+ */
+time_t rtc_read(void);
+
+/** Set the current time to the RTC peripheral
+ *
+ * @param t The current time to be set
+ */
+void rtc_write(time_t t);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/serial_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/serial_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,302 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_API_H
+#define MBED_SERIAL_API_H
+
+#include "device.h"
+#include "buffer.h"
+#include "dma_api.h"
+
+#if DEVICE_SERIAL
+
+#define SERIAL_EVENT_TX_SHIFT (2)
+#define SERIAL_EVENT_RX_SHIFT (8)
+
+#define SERIAL_EVENT_TX_MASK (0x00FC)
+#define SERIAL_EVENT_RX_MASK (0x3F00)
+
+#define SERIAL_EVENT_ERROR (1 << 1)
+
+/**
+ * @defgroup SerialTXEvents Serial TX Events Macros
+ *
+ * @{
+ */
+#define SERIAL_EVENT_TX_COMPLETE (1 << (SERIAL_EVENT_TX_SHIFT + 0))
+#define SERIAL_EVENT_TX_ALL (SERIAL_EVENT_TX_COMPLETE)
+/**@}*/
+
+/**
+ * @defgroup SerialRXEvents Serial RX Events Macros
+ *
+ * @{
+ */
+#define SERIAL_EVENT_RX_COMPLETE (1 << (SERIAL_EVENT_RX_SHIFT + 0))
+#define SERIAL_EVENT_RX_OVERRUN_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 1))
+#define SERIAL_EVENT_RX_FRAMING_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 2))
+#define SERIAL_EVENT_RX_PARITY_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 3))
+#define SERIAL_EVENT_RX_OVERFLOW (1 << (SERIAL_EVENT_RX_SHIFT + 4))
+#define SERIAL_EVENT_RX_CHARACTER_MATCH (1 << (SERIAL_EVENT_RX_SHIFT + 5))
+#define SERIAL_EVENT_RX_ALL (SERIAL_EVENT_RX_OVERFLOW | SERIAL_EVENT_RX_PARITY_ERROR | \
+ SERIAL_EVENT_RX_FRAMING_ERROR | SERIAL_EVENT_RX_OVERRUN_ERROR | \
+ SERIAL_EVENT_RX_COMPLETE | SERIAL_EVENT_RX_CHARACTER_MATCH)
+/**@}*/
+
+#define SERIAL_RESERVED_CHAR_MATCH (255)
+
+typedef enum {
+ ParityNone = 0,
+ ParityOdd = 1,
+ ParityEven = 2,
+ ParityForced1 = 3,
+ ParityForced0 = 4
+} SerialParity;
+
+typedef enum {
+ RxIrq,
+ TxIrq
+} SerialIrq;
+
+typedef enum {
+ FlowControlNone,
+ FlowControlRTS,
+ FlowControlCTS,
+ FlowControlRTSCTS
+} FlowControl;
+
+typedef void (*uart_irq_handler)(uint32_t id, SerialIrq event);
+
+#if DEVICE_SERIAL_ASYNCH
+/** Asynch serial HAL structure
+ */
+typedef struct {
+ struct serial_s serial; /**< Target specific serial structure */
+ struct buffer_s tx_buff; /**< TX buffer */
+ struct buffer_s rx_buff; /**< RX buffer */
+ uint8_t char_match; /**< Character to be matched */
+ uint8_t char_found; /**< State of the matched character */
+} serial_t;
+
+#else
+/** Non-asynch serial HAL structure
+ */
+typedef struct serial_s serial_t;
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup hal_GeneralSerial Serial Configuration Functions
+ * @{
+ */
+
+/** Initialize the serial peripheral. It sets the default parameters for serial
+ * peripheral, and configures its specifieds pins.
+ *
+ * @param obj The serial object
+ * @param tx The TX pin name
+ * @param rx The RX pin name
+ */
+void serial_init(serial_t *obj, PinName tx, PinName rx);
+
+/** Release the serial peripheral, not currently invoked. It requires further
+ * resource management.
+ *
+ * @param obj The serial object
+ */
+void serial_free(serial_t *obj);
+
+/** Configure the baud rate
+ *
+ * @param obj The serial object
+ * @param baudrate The baud rate to be configured
+ */
+void serial_baud(serial_t *obj, int baudrate);
+
+/** Configure the format. Set the number of bits, parity and the number of stop bits
+ *
+ * @param obj The serial object
+ * @param data_bits The number of data bits
+ * @param parity The parity
+ * @param stop_bits The number of stop bits
+ */
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits);
+
+/** The serial interrupt handler registration
+ *
+ * @param obj The serial object
+ * @param handler The interrupt handler which will be invoked when the interrupt fires
+ * @param id The SerialBase object
+ */
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id);
+
+/** Configure serial interrupt. This function is used for word-approach
+ *
+ * @param obj The serial object
+ * @param irq The serial IRQ type (RX or TX)
+ * @param enable Set to non-zero to enable events, or zero to disable them
+ */
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable);
+
+/** Get character. This is a blocking call, waiting for a character
+ *
+ * @param obj The serial object
+ */
+int serial_getc(serial_t *obj);
+
+/** Send a character. This is a blocking call, waiting for a peripheral to be available
+ * for writing
+ *
+ * @param obj The serial object
+ * @param c The character to be sent
+ */
+void serial_putc(serial_t *obj, int c);
+
+/** Check if the serial peripheral is readable
+ *
+ * @param obj The serial object
+ * @return Non-zero value if a character can be read, 0 if nothing to read
+ */
+int serial_readable(serial_t *obj);
+
+/** Check if the serial peripheral is writable
+ *
+ * @param obj The serial object
+ * @return Non-zero value if a character can be written, 0 otherwise.
+ */
+int serial_writable(serial_t *obj);
+
+/** Clear the serial peripheral
+ *
+ * @param obj The serial object
+ */
+void serial_clear(serial_t *obj);
+
+/** Set the break
+ *
+ * @param obj The serial object
+ */
+void serial_break_set(serial_t *obj);
+
+/** Clear the break
+ *
+ * @param obj The serial object
+ */
+void serial_break_clear(serial_t *obj);
+
+/** Configure the TX pin for UART function.
+ *
+ * @param tx The pin name used for TX
+ */
+void serial_pinout_tx(PinName tx);
+
+/** Configure the serial for the flow control. It sets flow control in the hardware
+ * if a serial peripheral supports it, otherwise software emulation is used.
+ *
+ * @param obj The serial object
+ * @param type The type of the flow control. Look at the available FlowControl types.
+ * @param rxflow The TX pin name
+ * @param txflow The RX pin name
+ */
+void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow);
+
+#if DEVICE_SERIAL_ASYNCH
+
+/**@}*/
+
+/**
+ * \defgroup hal_AsynchSerial Asynchronous Serial Hardware Abstraction Layer
+ * @{
+ */
+
+/** Begin asynchronous TX transfer. The used buffer is specified in the serial object,
+ * tx_buff
+ *
+ * @param obj The serial object
+ * @param tx The transmit buffer
+ * @param tx_length The number of bytes to transmit
+ * @param tx_width Deprecated argument
+ * @param handler The serial handler
+ * @param event The logical OR of events to be registered
+ * @param hint A suggestion for how to use DMA with this transfer
+ * @return Returns number of data transfered, otherwise returns 0
+ */
+int serial_tx_asynch(serial_t *obj, const void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** Begin asynchronous RX transfer (enable interrupt for data collecting)
+ * The used buffer is specified in the serial object - rx_buff
+ *
+ * @param obj The serial object
+ * @param rx The receive buffer
+ * @param rx_length The number of bytes to receive
+ * @param rx_width Deprecated argument
+ * @param handler The serial handler
+ * @param event The logical OR of events to be registered
+ * @param handler The serial handler
+ * @param char_match A character in range 0-254 to be matched
+ * @param hint A suggestion for how to use DMA with this transfer
+ */
+void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint);
+
+/** Attempts to determine if the serial peripheral is already in use for TX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the RX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_tx_active(serial_t *obj);
+
+/** Attempts to determine if the serial peripheral is already in use for RX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the RX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_rx_active(serial_t *obj);
+
+/** The asynchronous TX and RX handler.
+ *
+ * @param obj The serial object
+ * @return Returns event flags if an RX transfer termination condition was met; otherwise returns 0
+ */
+int serial_irq_handler_asynch(serial_t *obj);
+
+/** Abort the ongoing TX transaction. It disables the enabled interupt for TX and
+ * flushes the TX hardware buffer if TX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_tx_abort_asynch(serial_t *obj);
+
+/** Abort the ongoing RX transaction. It disables the enabled interrupt for RX and
+ * flushes the RX hardware buffer if RX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_rx_abort_asynch(serial_t *obj);
+
+/**@}*/
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/sleep_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/sleep_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,64 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SLEEP_API_H
+#define MBED_SLEEP_API_H
+
+#include "device.h"
+
+#if DEVICE_SLEEP
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Send the microcontroller to sleep
+ *
+ * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the
+ * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates
+ * dynamic power used by the processor, memory systems and buses. The processor, peripheral and
+ * memory state are maintained, and the peripherals continue to work and can generate interrupts.
+ *
+ * The processor can be woken up by any internal peripheral interrupt or external pin interrupt.
+ *
+ * @note
+ * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void sleep(void);
+
+/** Send the microcontroller to deep sleep
+ *
+ * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode
+ * has the same sleep features as sleep plus it powers down peripherals and clocks. All state
+ * is still maintained.
+ *
+ * The processor can only be woken up by an external interrupt on a pin or a watchdog timer.
+ *
+ * @note
+ * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void deepsleep(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/spi_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/spi_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,214 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_API_H
+#define MBED_SPI_API_H
+
+#include "device.h"
+#include "dma_api.h"
+#include "buffer.h"
+
+#if DEVICE_SPI
+
+#define SPI_EVENT_ERROR (1 << 1)
+#define SPI_EVENT_COMPLETE (1 << 2)
+#define SPI_EVENT_RX_OVERFLOW (1 << 3)
+#define SPI_EVENT_ALL (SPI_EVENT_ERROR | SPI_EVENT_COMPLETE | SPI_EVENT_RX_OVERFLOW)
+
+#define SPI_EVENT_INTERNAL_TRANSFER_COMPLETE (1 << 30) // Internal flag to report that an event occurred
+
+#define SPI_FILL_WORD (0xFFFF)
+
+#if DEVICE_SPI_ASYNCH
+/** Asynch SPI HAL structure
+ */
+typedef struct {
+ struct spi_s spi; /**< Target specific SPI structure */
+ struct buffer_s tx_buff; /**< Tx buffer */
+ struct buffer_s rx_buff; /**< Rx buffer */
+} spi_t;
+
+#else
+/** Non-asynch SPI HAL structure
+ */
+typedef struct spi_s spi_t;
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup hal_GeneralSPI SPI Configuration Functions
+ * @{
+ */
+
+/** Initialize the SPI peripheral
+ *
+ * Configures the pins used by SPI, sets a default format and frequency, and enables the peripheral
+ * @param[out] obj The SPI object to initialize
+ * @param[in] mosi The pin to use for MOSI
+ * @param[in] miso The pin to use for MISO
+ * @param[in] sclk The pin to use for SCLK
+ * @param[in] ssel The pin to use for SSEL
+ */
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+/** Release a SPI object
+ *
+ * TODO: spi_free is currently unimplemented
+ * This will require reference counting at the C++ level to be safe
+ *
+ * Return the pins owned by the SPI object to their reset state
+ * Disable the SPI peripheral
+ * Disable the SPI clock
+ * @param[in] obj The SPI object to deinitialize
+ */
+void spi_free(spi_t *obj);
+
+/** Configure the SPI format
+ *
+ * Set the number of bits per frame, configure clock polarity and phase, shift order and master/slave mode.
+ * The default bit order is MSB.
+ * @param[in,out] obj The SPI object to configure
+ * @param[in] bits The number of bits per frame
+ * @param[in] mode The SPI mode (clock polarity, phase, and shift direction)
+ * @param[in] slave Zero for master mode or non-zero for slave mode
+ */
+void spi_format(spi_t *obj, int bits, int mode, int slave);
+
+/** Set the SPI baud rate
+ *
+ * Actual frequency may differ from the desired frequency due to available dividers and bus clock
+ * Configures the SPI peripheral's baud rate
+ * @param[in,out] obj The SPI object to configure
+ * @param[in] hz The baud rate in Hz
+ */
+void spi_frequency(spi_t *obj, int hz);
+
+/**@}*/
+/**
+ * \defgroup SynchSPI Synchronous SPI Hardware Abstraction Layer
+ * @{
+ */
+
+/** Write a byte out in master mode and receive a value
+ *
+ * @param[in] obj The SPI peripheral to use for sending
+ * @param[in] value The value to send
+ * @return Returns the value received during send
+ */
+int spi_master_write(spi_t *obj, int value);
+
+/** Check if a value is available to read
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return non-zero if a value is available
+ */
+int spi_slave_receive(spi_t *obj);
+
+/** Get a received value out of the SPI receive buffer in slave mode
+ *
+ * Blocks until a value is available
+ * @param[in] obj The SPI peripheral to read
+ * @return The value received
+ */
+int spi_slave_read(spi_t *obj);
+
+/** Write a value to the SPI peripheral in slave mode
+ *
+ * Blocks until the SPI peripheral can be written to
+ * @param[in] obj The SPI peripheral to write
+ * @param[in] value The value to write
+ */
+void spi_slave_write(spi_t *obj, int value);
+
+/** Checks if the specified SPI peripheral is in use
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return non-zero if the peripheral is currently transmitting
+ */
+int spi_busy(spi_t *obj);
+
+/** Get the module number
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return The module number
+ */
+uint8_t spi_get_module(spi_t *obj);
+
+/**@}*/
+
+#if DEVICE_SPI_ASYNCH
+/**
+ * \defgroup AsynchSPI Asynchronous SPI Hardware Abstraction Layer
+ * @{
+ */
+
+/** Begin the SPI transfer. Buffer pointers and lengths are specified in tx_buff and rx_buff
+ *
+ * @param[in] obj The SPI object that holds the transfer information
+ * @param[in] tx The transmit buffer
+ * @param[in] tx_length The number of bytes to transmit
+ * @param[in] rx The receive buffer
+ * @param[in] rx_length The number of bytes to receive
+ * @param[in] bit_width The bit width of buffer words
+ * @param[in] event The logical OR of events to be registered
+ * @param[in] handler SPI interrupt handler
+ * @param[in] hint A suggestion for how to use DMA with this transfer
+ */
+void spi_master_transfer(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** The asynchronous IRQ handler
+ *
+ * Reads the received values out of the RX FIFO, writes values into the TX FIFO and checks for transfer termination
+ * conditions, such as buffer overflows or transfer complete.
+ * @param[in] obj The SPI object that holds the transfer information
+ * @return Event flags if a transfer termination condition was met; otherwise 0.
+ */
+uint32_t spi_irq_handler_asynch(spi_t *obj);
+
+/** Attempts to determine if the SPI peripheral is already in use
+ *
+ * If a temporary DMA channel has been allocated, peripheral is in use.
+ * If a permanent DMA channel has been allocated, check if the DMA channel is in use. If not, proceed as though no DMA
+ * channel were allocated.
+ * If no DMA channel is allocated, check whether tx and rx buffers have been assigned. For each assigned buffer, check
+ * if the corresponding buffer position is less than the buffer length. If buffers do not indicate activity, check if
+ * there are any bytes in the FIFOs.
+ * @param[in] obj The SPI object to check for activity
+ * @return Non-zero if the SPI port is active or zero if it is not.
+ */
+uint8_t spi_active(spi_t *obj);
+
+/** Abort an SPI transfer
+ *
+ * @param obj The SPI peripheral to stop
+ */
+void spi_abort_asynch(spi_t *obj);
+
+
+#endif
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif // __cplusplus
+
+#endif // SPI_DEVICE
+
+#endif // MBED_SPI_API_H
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/storage_abstraction/Driver_Common.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/storage_abstraction/Driver_Common.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2006-2016, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __DRIVER_COMMON_H
+#define __DRIVER_COMMON_H
+
+#include <stddef.h>
+#include <stdint.h>
+#include <stdbool.h>
+
+#define ARM_DRIVER_VERSION_MAJOR_MINOR(major,minor) (((major) << 8) | (minor))
+
+/**
+\brief Driver Version
+*/
+typedef struct _ARM_DRIVER_VERSION {
+ uint16_t api; ///< API version
+ uint16_t drv; ///< Driver version
+} ARM_DRIVER_VERSION;
+
+/* General return codes */
+#define ARM_DRIVER_OK 0 ///< Operation succeeded
+#define ARM_DRIVER_ERROR -1 ///< Unspecified error
+#define ARM_DRIVER_ERROR_BUSY -2 ///< Driver is busy
+#define ARM_DRIVER_ERROR_TIMEOUT -3 ///< Timeout occurred
+#define ARM_DRIVER_ERROR_UNSUPPORTED -4 ///< Operation not supported
+#define ARM_DRIVER_ERROR_PARAMETER -5 ///< Parameter error
+#define ARM_DRIVER_ERROR_SPECIFIC -6 ///< Start of driver specific errors
+
+/**
+\brief General power states
+*/
+typedef enum _ARM_POWER_STATE {
+ ARM_POWER_OFF, ///< Power off: no operation possible
+ ARM_POWER_LOW, ///< Low Power mode: retain state, detect and signal wake-up events
+ ARM_POWER_FULL ///< Power on: full operation at maximum performance
+} ARM_POWER_STATE;
+
+#endif /* __DRIVER_COMMON_H */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/storage_abstraction/Driver_Storage.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/storage_abstraction/Driver_Storage.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,768 @@
+/*
+ * Copyright (c) 2006-2016, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __DRIVER_STORAGE_H
+#define __DRIVER_STORAGE_H
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+#include "Driver_Common.h"
+
+#define ARM_STORAGE_API_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(1,00) /* API version */
+
+
+#define _ARM_Driver_Storage_(n) Driver_Storage##n
+#define ARM_Driver_Storage_(n) _ARM_Driver_Storage_(n)
+
+#define ARM_STORAGE_INVALID_OFFSET (0xFFFFFFFFFFFFFFFFULL) ///< Invalid address (relative to a storage controller's
+ ///< address space). A storage block may never start at this address.
+
+#define ARM_STORAGE_INVALID_ADDRESS (0xFFFFFFFFUL) ///< Invalid address within the processor's memory address space.
+ ///< Refer to memory-mapped storage, i.e. < \ref ARM_DRIVER_STORAGE::ResolveAddress().
+
+/****** Storage specific error codes *****/
+#define ARM_STORAGE_ERROR_NOT_ERASABLE (ARM_DRIVER_ERROR_SPECIFIC - 1) ///< Part (or all) of the range provided to Erase() isn't erasable.
+#define ARM_STORAGE_ERROR_NOT_PROGRAMMABLE (ARM_DRIVER_ERROR_SPECIFIC - 2) ///< Part (or all) of the range provided to ProgramData() isn't programmable.
+#define ARM_STORAGE_ERROR_PROTECTED (ARM_DRIVER_ERROR_SPECIFIC - 3) ///< Part (or all) of the range to Erase() or ProgramData() is protected.
+#define ARM_STORAGE_ERROR_RUNTIME_OR_INTEGRITY_FAILURE (ARM_DRIVER_ERROR_SPECIFIC - 4) ///< Runtime or sanity-check failure.
+
+/**
+ * \brief Attributes of the storage range within a storage block.
+ */
+typedef struct _ARM_STORAGE_BLOCK_ATTRIBUTES {
+ uint32_t erasable : 1; ///< Erasing blocks is permitted with a minimum granularity of 'erase_unit'.
+ ///< @note: if 'erasable' is 0--i.e. the 'erase' operation isn't available--then
+ ///< 'erase_unit' (see below) is immaterial and should be 0.
+ uint32_t programmable : 1; ///< Writing to ranges is permitted with a minimum granularity of 'program_unit'.
+ ///< Writes are typically achieved through the ProgramData operation (following an erase);
+ ///< if storage isn't erasable (see 'erasable' above) but is memory-mapped
+ ///< (i.e. 'memory_mapped'), it can be written directly using memory-store operations.
+ uint32_t executable : 1; ///< This storage block can hold program data; the processor can fetch and execute code
+ ///< sourced from it. Often this is accompanied with the device being 'memory_mapped' (see \ref ARM_STORAGE_INFO).
+ uint32_t protectable : 1; ///< The entire block can be protected from program and erase operations. Once protection
+ ///< is enabled for a block, its 'erasable' and 'programmable' bits are turned off.
+ uint32_t reserved : 28;
+ uint32_t erase_unit; ///< Minimum erase size in bytes.
+ ///< The offset of the start of the erase-range should also be aligned with this value.
+ ///< Applicable if the 'erasable' attribute is set for the block.
+ ///< @note: if 'erasable' (see above) is 0--i.e. the 'erase' operation isn't available--then
+ ///< 'erase_unit' is immaterial and should be 0.
+ uint32_t protection_unit; ///< Minimum protectable size in bytes. Applicable if the 'protectable'
+ ///< attribute is set for the block. This should be a divisor of the block's size. A
+ ///< block can be considered to be made up of consecutive, individually-protectable fragments.
+} ARM_STORAGE_BLOCK_ATTRIBUTES;
+
+/**
+ * \brief A storage block is a range of memory with uniform attributes. Storage blocks
+ * combine to make up the address map of a storage controller.
+ */
+typedef struct _ARM_STORAGE_BLOCK {
+ uint64_t addr; ///< This is the start address of the storage block. It is
+ ///< expressed as an offset from the start of the storage map
+ ///< maintained by the owning storage controller.
+ uint64_t size; ///< This is the size of the storage block, in units of bytes.
+ ///< Together with addr, it describes a range [addr, addr+size).
+ ARM_STORAGE_BLOCK_ATTRIBUTES attributes; ///< Attributes for this block.
+} ARM_STORAGE_BLOCK;
+
+/**
+ * The check for a valid ARM_STORAGE_BLOCK.
+ */
+#define ARM_STORAGE_VALID_BLOCK(BLK) (((BLK)->addr != ARM_STORAGE_INVALID_OFFSET) && ((BLK)->size != 0))
+
+/**
+ * \brief Values for encoding storage memory-types with respect to programmability.
+ *
+ * Please ensure that the maximum of the following memory types doesn't exceed 16; we
+ * encode this in a 4-bit field within ARM_STORAGE_INFO::programmability.
+ */
+#define ARM_STORAGE_PROGRAMMABILITY_RAM (0x0)
+#define ARM_STORAGE_PROGRAMMABILITY_ROM (0x1) ///< Read-only memory.
+#define ARM_STORAGE_PROGRAMMABILITY_WORM (0x2) ///< write-once-read-only-memory (WORM).
+#define ARM_STORAGE_PROGRAMMABILITY_ERASABLE (0x3) ///< re-programmable based on erase. Supports multiple writes.
+
+/**
+ * Values for encoding data-retention levels for storage blocks.
+ *
+ * Please ensure that the maximum of the following retention types doesn't exceed 16; we
+ * encode this in a 4-bit field within ARM_STORAGE_INFO::retention_level.
+ */
+#define ARM_RETENTION_WHILE_DEVICE_ACTIVE (0x0) ///< Data is retained only during device activity.
+#define ARM_RETENTION_ACROSS_SLEEP (0x1) ///< Data is retained across processor sleep.
+#define ARM_RETENTION_ACROSS_DEEP_SLEEP (0x2) ///< Data is retained across processor deep-sleep.
+#define ARM_RETENTION_BATTERY_BACKED (0x3) ///< Data is battery-backed. Device can be powered off.
+#define ARM_RETENTION_NVM (0x4) ///< Data is retained in non-volatile memory.
+
+/**
+ * Device Data Security Protection Features. Applicable mostly to EXTERNAL_NVM.
+ */
+typedef struct _ARM_STORAGE_SECURITY_FEATURES {
+ uint32_t acls : 1; ///< Protection against internal software attacks using ACLs.
+ uint32_t rollback_protection : 1; ///< Roll-back protection. Set to true if the creator of the storage
+ ///< can ensure that an external attacker can't force an
+ ///< older firmware to run or to revert back to a previous state.
+ uint32_t tamper_proof : 1; ///< Tamper-proof memory (will be deleted on tamper-attempts using board level or chip level sensors).
+ uint32_t internal_flash : 1; ///< Internal flash.
+ uint32_t reserved1 : 12;
+
+ /**
+ * Encode support for hardening against various classes of attacks.
+ */
+ uint32_t software_attacks : 1; ///< device software (malware running on the device).
+ uint32_t board_level_attacks : 1; ///< board level attacks (debug probes, copy protection fuses.)
+ uint32_t chip_level_attacks : 1; ///< chip level attacks (tamper-protection).
+ uint32_t side_channel_attacks : 1; ///< side channel attacks.
+ uint32_t reserved2 : 12;
+} ARM_STORAGE_SECURITY_FEATURES;
+
+#define ARM_STORAGE_PROGRAM_CYCLES_INFINITE (0UL) /**< Infinite or unknown endurance for reprogramming. */
+
+/**
+ * \brief Storage information. This contains device-metadata. It is the return
+ * value from calling GetInfo() on the storage driver.
+ *
+ * \details These fields serve a different purpose than the ones contained in
+ * \ref ARM_STORAGE_CAPABILITIES, which is another structure containing
+ * device-level metadata. ARM_STORAGE_CAPABILITIES describes the API
+ * capabilities, whereas ARM_STORAGE_INFO describes the device. Furthermore
+ * ARM_STORAGE_CAPABILITIES fits within a single word, and is designed to be
+ * passed around by value; ARM_STORAGE_INFO, on the other hand, contains
+ * metadata which doesn't fit into a single word and requires the use of
+ * pointers to be moved around.
+ */
+typedef struct _ARM_STORAGE_INFO {
+ uint64_t total_storage; ///< Total available storage, in bytes.
+ uint32_t program_unit; ///< Minimum programming size in bytes.
+ ///< The offset of the start of the program-range should also be aligned with this value.
+ ///< Applicable only if the 'programmable' attribute is set for a block.
+ ///< @note: setting program_unit to 0 has the effect of disabling the size and alignment
+ ///< restrictions (setting it to 1 also has the same effect).
+ uint32_t optimal_program_unit; ///< Optimal programming page-size in bytes. Some storage controllers
+ ///< have internal buffers into which to receive data. Writing in chunks of
+ ///< 'optimal_program_unit' would achieve maximum programming speed.
+ ///< Applicable only if the 'programmable' attribute is set for the underlying block(s).
+ uint32_t program_cycles; ///< A measure of endurance for reprogramming.
+ ///< Use ARM_STORAGE_PROGRAM_CYCLES_INFINITE for infinite or unknown endurance.
+ uint32_t erased_value : 1; ///< Contents of erased memory (usually 1 to indicate erased bytes with state 0xFF).
+ uint32_t memory_mapped : 1; ///< This storage device has a mapping onto the processor's memory address space.
+ ///< @note: For a memory-mapped block which isn't erasable but is programmable (i.e. if
+ ///< 'erasable' is set to 0, but 'programmable' is 1), writes should be possible directly to
+ ///< the memory-mapped storage without going through the ProgramData operation.
+ uint32_t programmability : 4; ///< A value to indicate storage programmability.
+ uint32_t retention_level : 4;
+ uint32_t reserved : 22;
+ ARM_STORAGE_SECURITY_FEATURES security; ///< \ref ARM_STORAGE_SECURITY_FEATURES
+} ARM_STORAGE_INFO;
+
+/**
+\brief Operating status of the storage controller.
+*/
+typedef struct _ARM_STORAGE_STATUS {
+ uint32_t busy : 1; ///< Controller busy flag
+ uint32_t error : 1; ///< Read/Program/Erase error flag (cleared on start of next operation)
+} ARM_STORAGE_STATUS;
+
+/**
+ * \brief Storage Driver API Capabilities.
+ *
+ * This data structure is designed to fit within a single word so that it can be
+ * fetched cheaply using a call to driver->GetCapabilities().
+ */
+typedef struct _ARM_STORAGE_CAPABILITIES {
+ uint32_t asynchronous_ops : 1; ///< Used to indicate if APIs like initialize,
+ ///< read, erase, program, etc. can operate in asynchronous mode.
+ ///< Setting this bit to 1 means that the driver is capable
+ ///< of launching asynchronous operations; command completion is
+ ///< signaled by the invocation of a completion callback. If
+ ///< set to 1, drivers may still complete asynchronous
+ ///< operations synchronously as necessary--in which case they
+ ///< return a positive error code to indicate synchronous completion.
+ uint32_t erase_all : 1; ///< Supports EraseAll operation.
+ uint32_t reserved : 30;
+} ARM_STORAGE_CAPABILITIES;
+
+/**
+ * Command opcodes for Storage. Completion callbacks use these codes to refer to
+ * completing commands. Refer to \ref ARM_Storage_Callback_t.
+ */
+typedef enum _ARM_STORAGE_OPERATION {
+ ARM_STORAGE_OPERATION_GET_VERSION,
+ ARM_STORAGE_OPERATION_GET_CAPABILITIES,
+ ARM_STORAGE_OPERATION_INITIALIZE,
+ ARM_STORAGE_OPERATION_UNINITIALIZE,
+ ARM_STORAGE_OPERATION_POWER_CONTROL,
+ ARM_STORAGE_OPERATION_READ_DATA,
+ ARM_STORAGE_OPERATION_PROGRAM_DATA,
+ ARM_STORAGE_OPERATION_ERASE,
+ ARM_STORAGE_OPERATION_ERASE_ALL,
+ ARM_STORAGE_OPERATION_GET_STATUS,
+ ARM_STORAGE_OPERATION_GET_INFO,
+ ARM_STORAGE_OPERATION_RESOLVE_ADDRESS,
+ ARM_STORAGE_OPERATION_GET_NEXT_BLOCK,
+ ARM_STORAGE_OPERATION_GET_BLOCK
+} ARM_STORAGE_OPERATION;
+
+/**
+ * Declaration of the callback-type for command completion.
+ *
+ * @param [in] status
+ * A code to indicate the status of the completed operation. For data
+ * transfer operations, the status field is overloaded in case of
+ * success to return the count of items successfully transferred; this
+ * can be done safely because error codes are negative values.
+ *
+ * @param [in] operation
+ * The command op-code. This value isn't essential for the callback in
+ * the presence of the command instance-id, but it is expected that
+ * this information could be a quick and useful filter.
+ */
+typedef void (*ARM_Storage_Callback_t)(int32_t status, ARM_STORAGE_OPERATION operation);
+
+/**
+ * This is the set of operations constituting the Storage driver. Their
+ * implementation is platform-specific, and needs to be supplied by the
+ * porting effort.
+ *
+ * Some APIs within `ARM_DRIVER_STORAGE` will always operate synchronously:
+ * GetVersion, GetCapabilities, GetStatus, GetInfo, ResolveAddress,
+ * GetNextBlock, and GetBlock. This means that control returns to the caller
+ * with a relevant status code only after the completion of the operation (or
+ * the discovery of a failure condition).
+ *
+ * The remainder of the APIs: Initialize, Uninitialize, PowerControl, ReadData,
+ * ProgramData, Erase, EraseAll, can function asynchronously if the underlying
+ * controller supports it--i.e. if ARM_STORAGE_CAPABILITIES::asynchronous_ops is
+ * set. In the case of asynchronous operation, the invocation returns early
+ * (with ARM_DRIVER_OK) and results in a completion callback later. If
+ * ARM_STORAGE_CAPABILITIES::asynchronous_ops is not set, then all such APIs
+ * execute synchronously, and control returns to the caller with a status code
+ * only after the completion of the operation (or the discovery of a failure
+ * condition).
+ *
+ * If ARM_STORAGE_CAPABILITIES::asynchronous_ops is set, a storage driver may
+ * still choose to execute asynchronous operations in a synchronous manner. If
+ * so, the driver returns a positive value to indicate successful synchronous
+ * completion (or an error code in case of failure) and no further invocation of
+ * completion callback should be expected. The expected return value for
+ * synchronous completion of such asynchronous operations varies depending on
+ * the operation. For operations involving data access, it often equals the
+ * amount of data transferred or affected. For non data-transfer operations,
+ * such as EraseAll or Initialize, it is usually 1.
+ *
+ * Here's a code snippet to suggest how asynchronous APIs might be used by
+ * callers to handle both synchronous and asynchronous execution by the
+ * underlying storage driver:
+ * \code
+ * ASSERT(ARM_DRIVER_OK == 0); // this is a precondition; it doesn't need to be put in code
+ * int32_t returnValue = drv->asynchronousAPI(...);
+ * if (returnValue < ARM_DRIVER_OK) {
+ * // handle error.
+ * } else if (returnValue == ARM_DRIVER_OK) {
+ * ASSERT(drv->GetCapabilities().asynchronous_ops == 1);
+ * // handle early return from asynchronous execution; remainder of the work is done in the callback handler.
+ * } else {
+ * ASSERT(returnValue == EXPECTED_RETURN_VALUE_FOR_SYNCHRONOUS_COMPLETION);
+ * // handle synchronous completion.
+ * }
+ * \endcode
+ */
+typedef struct _ARM_DRIVER_STORAGE {
+ /**
+ * \brief Get driver version.
+ *
+ * The function GetVersion() returns version information of the driver implementation in ARM_DRIVER_VERSION.
+ *
+ * - API version is the version of the CMSIS-Driver specification used to implement this driver.
+ * - Driver version is source code version of the actual driver implementation.
+ *
+ * Example:
+ * \code
+ * extern ARM_DRIVER_STORAGE *drv_info;
+ *
+ * void read_version (void) {
+ * ARM_DRIVER_VERSION version;
+ *
+ * version = drv_info->GetVersion ();
+ * if (version.api < 0x10A) { // requires at minimum API version 1.10 or higher
+ * // error handling
+ * return;
+ * }
+ * }
+ * \endcode
+ *
+ * @return \ref ARM_DRIVER_VERSION.
+ *
+ * @note This API returns synchronously--it does not result in an invocation
+ * of a completion callback.
+ *
+ * @note The function GetVersion() can be called any time to obtain the
+ * required information from the driver (even before initialization). It
+ * always returns the same information.
+ */
+ ARM_DRIVER_VERSION (*GetVersion)(void);
+
+ /**
+ * \brief Get driver capabilities.
+ *
+ * \details The function GetCapabilities() returns information about
+ * capabilities in this driver implementation. The data fields of the struct
+ * ARM_STORAGE_CAPABILITIES encode various capabilities, for example if the device
+ * is able to execute operations asynchronously.
+ *
+ * Example:
+ * \code
+ * extern ARM_DRIVER_STORAGE *drv_info;
+ *
+ * void read_capabilities (void) {
+ * ARM_STORAGE_CAPABILITIES drv_capabilities;
+ *
+ * drv_capabilities = drv_info->GetCapabilities ();
+ * // interrogate capabilities
+ *
+ * }
+ * \endcode
+ *
+ * @return \ref ARM_STORAGE_CAPABILITIES.
+ *
+ * @note This API returns synchronously--it does not result in an invocation
+ * of a completion callback.
+ *
+ * @note The function GetCapabilities() can be called any time to obtain the
+ * required information from the driver (even before initialization). It
+ * always returns the same information.
+ */
+ ARM_STORAGE_CAPABILITIES (*GetCapabilities)(void);
+
+ /**
+ * \brief Initialize the Storage Interface.
+ *
+ * The function Initialize is called when the middleware component starts
+ * operation. In addition to bringing the controller to a ready state,
+ * Initialize() receives a callback handler to be invoked upon completion of
+ * asynchronous operations.
+ *
+ * Initialize() needs to be called explicitly before
+ * powering the peripheral using PowerControl(), and before initiating other
+ * accesses to the storage controller.
+ *
+ * The function performs the following operations:
+ * - Initializes the resources needed for the Storage interface.
+ * - Registers the \ref ARM_Storage_Callback_t callback function.
+ *
+ * To start working with a peripheral the functions Initialize and PowerControl need to be called in this order:
+ * drv->Initialize (...); // Allocate I/O pins
+ * drv->PowerControl (ARM_POWER_FULL); // Power up peripheral, setup IRQ/DMA
+ *
+ * - Initialize() typically allocates the I/O resources (pins) for the
+ * peripheral. The function can be called multiple times; if the I/O resources
+ * are already initialized it performs no operation and just returns with
+ * ARM_DRIVER_OK.
+ *
+ * - PowerControl (ARM_POWER_FULL) sets the peripheral registers including
+ * interrupt (NVIC) and optionally DMA. The function can be called multiple
+ * times; if the registers are already set it performs no operation and just
+ * returns with ARM_DRIVER_OK.
+ *
+ * To stop working with a peripheral the functions PowerControl and Uninitialize need to be called in this order:
+ * drv->PowerControl (ARM_POWER_OFF); // Terminate any pending transfers, reset IRQ/DMA, power off peripheral
+ * drv->Uninitialize (...); // Release I/O pins
+ *
+ * The functions PowerControl and Uninitialize always execute and can be used
+ * to put the peripheral into a Safe State, for example after any data
+ * transmission errors. To restart the peripheral in an error condition,
+ * you should first execute the Stop Sequence and then the Start Sequence.
+ *
+ * @param [in] callback
+ * Caller-defined callback to be invoked upon command completion
+ * for asynchronous APIs (including the completion of
+ * initialization). Use a NULL pointer when no callback
+ * signals are required.
+ *
+ * @note This API may execute asynchronously if
+ * ARM_STORAGE_CAPABILITIES::asynchronous_ops is set. Asynchronous
+ * execution is optional even if 'asynchronous_ops' is set.
+ *
+ * @return If asynchronous activity is launched, an invocation returns
+ * ARM_DRIVER_OK, and the caller can expect to receive a callback in the
+ * future with a status value of ARM_DRIVER_OK or an error-code. In the
+ * case of synchronous execution, control returns after completion with a
+ * value of 1. Return values less than ARM_DRIVER_OK (0) signify errors.
+ */
+ int32_t (*Initialize)(ARM_Storage_Callback_t callback);
+
+ /**
+ * \brief De-initialize the Storage Interface.
+ *
+ * The function Uninitialize() de-initializes the resources of Storage interface.
+ *
+ * It is called when the middleware component stops operation, and wishes to
+ * release the software resources used by the interface.
+ *
+ * @note This API may execute asynchronously if
+ * ARM_STORAGE_CAPABILITIES::asynchronous_ops is set. Asynchronous
+ * execution is optional even if 'asynchronous_ops' is set.
+ *
+ * @return If asynchronous activity is launched, an invocation returns
+ * ARM_DRIVER_OK, and the caller can expect to receive a callback in the
+ * future with a status value of ARM_DRIVER_OK or an error-code. In the
+ * case of synchronous execution, control returns after completion with a
+ * value of 1. Return values less than ARM_DRIVER_OK (0) signify errors.
+ */
+ int32_t (*Uninitialize)(void);
+
+ /**
+ * \brief Control the Storage interface power.
+ *
+ * The function \b ARM_Storage_PowerControl operates the power modes of the Storage interface.
+ *
+ * To start working with a peripheral the functions Initialize and PowerControl need to be called in this order:
+ * drv->Initialize (...); // Allocate I/O pins
+ * drv->PowerControl (ARM_POWER_FULL); // Power up peripheral, setup IRQ/DMA
+ *
+ * - Initialize() typically allocates the I/O resources (pins) for the
+ * peripheral. The function can be called multiple times; if the I/O resources
+ * are already initialized it performs no operation and just returns with
+ * ARM_DRIVER_OK.
+ *
+ * - PowerControl (ARM_POWER_FULL) sets the peripheral registers including
+ * interrupt (NVIC) and optionally DMA. The function can be called multiple
+ * times; if the registers are already set it performs no operation and just
+ * returns with ARM_DRIVER_OK.
+ *
+ * To stop working with a peripheral the functions PowerControl and Uninitialize need to be called in this order:
+ *
+ * drv->PowerControl (ARM_POWER_OFF); // Terminate any pending transfers, reset IRQ/DMA, power off peripheral
+ * drv->Uninitialize (...); // Release I/O pins
+ *
+ * The functions PowerControl and Uninitialize always execute and can be used
+ * to put the peripheral into a Safe State, for example after any data
+ * transmission errors. To restart the peripheral in an error condition,
+ * you should first execute the Stop Sequence and then the Start Sequence.
+ *
+ * @param state
+ * \ref ARM_POWER_STATE. The target power-state for the storage controller.
+ * The parameter state can have the following values:
+ * - ARM_POWER_FULL : set-up peripheral for data transfers, enable interrupts
+ * (NVIC) and optionally DMA. Can be called multiple times. If the peripheral
+ * is already in this mode, then the function performs no operation and returns
+ * with ARM_DRIVER_OK.
+ * - ARM_POWER_LOW : may use power saving. Returns ARM_DRIVER_ERROR_UNSUPPORTED when not implemented.
+ * - ARM_POWER_OFF : terminates any pending data transfers, disables peripheral, disables related interrupts and DMA.
+ *
+ * @note This API may execute asynchronously if
+ * ARM_STORAGE_CAPABILITIES::asynchronous_ops is set. Asynchronous
+ * execution is optional even if 'asynchronous_ops' is set.
+ *
+ * @return If asynchronous activity is launched, an invocation returns
+ * ARM_DRIVER_OK, and the caller can expect to receive a callback in the
+ * future with a status value of ARM_DRIVER_OK or an error-code. In the
+ * case of synchronous execution, control returns after completion with a
+ * value of 1. Return values less than ARM_DRIVER_OK (0) signify errors.
+ */
+ int32_t (*PowerControl)(ARM_POWER_STATE state);
+
+ /**
+ * \brief read the contents of a given address range from the storage device.
+ *
+ * \details Read the contents of a range of storage memory into a buffer
+ * supplied by the caller. The buffer is owned by the caller and should
+ * remain accessible for the lifetime of this command.
+ *
+ * @param [in] addr
+ * This specifies the address from where to read data.
+ *
+ * @param [out] data
+ * The destination of the read operation. The buffer
+ * is owned by the caller and should remain accessible for the
+ * lifetime of this command.
+ *
+ * @param [in] size
+ * The number of bytes requested to read. The data buffer
+ * should be at least as large as this size.
+ *
+ * @note This API may execute asynchronously if
+ * ARM_STORAGE_CAPABILITIES::asynchronous_ops is set. Asynchronous
+ * execution is optional even if 'asynchronous_ops' is set.
+ *
+ * @return If asynchronous activity is launched, an invocation returns
+ * ARM_DRIVER_OK, and the caller can expect to receive a callback in the
+ * future with the number of successfully transferred bytes passed in as
+ * the 'status' parameter. In the case of synchronous execution, control
+ * returns after completion with a positive transfer-count. Return values
+ * less than ARM_DRIVER_OK (0) signify errors.
+ */
+ int32_t (*ReadData)(uint64_t addr, void *data, uint32_t size);
+
+ /**
+ * \brief program (write into) the contents of a given address range of the storage device.
+ *
+ * \details Write the contents of a given memory buffer into a range of
+ * storage memory. In the case of flash memory, the destination range in
+ * storage memory typically has its contents in an erased state from a
+ * preceding erase operation. The source memory buffer is owned by the
+ * caller and should remain accessible for the lifetime of this command.
+ *
+ * @param [in] addr
+ * This is the start address of the range to be written into. It
+ * needs to be aligned to the device's \em program_unit
+ * specified in \ref ARM_STORAGE_INFO.
+ *
+ * @param [in] data
+ * The source of the write operation. The buffer is owned by the
+ * caller and should remain accessible for the lifetime of this
+ * command.
+ *
+ * @param [in] size
+ * The number of bytes requested to be written. The buffer
+ * should be at least as large as this size. \note 'size' should
+ * be a multiple of the device's 'program_unit' (see \ref
+ * ARM_STORAGE_INFO).
+ *
+ * @note It is best for the middleware to write in units of
+ * 'optimal_program_unit' (\ref ARM_STORAGE_INFO) of the device.
+ *
+ * @note This API may execute asynchronously if
+ * ARM_STORAGE_CAPABILITIES::asynchronous_ops is set. Asynchronous
+ * execution is optional even if 'asynchronous_ops' is set.
+ *
+ * @return If asynchronous activity is launched, an invocation returns
+ * ARM_DRIVER_OK, and the caller can expect to receive a callback in the
+ * future with the number of successfully transferred bytes passed in as
+ * the 'status' parameter. In the case of synchronous execution, control
+ * returns after completion with a positive transfer-count. Return values
+ * less than ARM_DRIVER_OK (0) signify errors.
+ */
+ int32_t (*ProgramData)(uint64_t addr, const void *data, uint32_t size);
+
+ /**
+ * @brief Erase Storage range.
+ *
+ * @details This function erases a range of storage specified by [addr, addr +
+ * size). Both 'addr' and 'addr + size' should align with the
+ * 'erase_unit'(s) of the respective owning storage block(s) (see \ref
+ * ARM_STORAGE_BLOCK and \ref ARM_STORAGE_BLOCK_ATTRIBUTES). The range to
+ * be erased will have its contents returned to the un-programmed state--
+ * i.e. to 'erased_value' (see \ref ARM_STORAGE_BLOCK_ATTRIBUTES), which
+ * is usually 1 to indicate the pattern of all ones: 0xFF.
+ *
+ * @param [in] addr
+ * This is the start-address of the range to be erased. It must
+ * start at an 'erase_unit' boundary of the underlying block.
+ *
+ * @param [in] size
+ * Size (in bytes) of the range to be erased. 'addr + size'
+ * must be aligned with the 'erase_unit' of the underlying
+ * block.
+ *
+ * @note This API may execute asynchronously if
+ * ARM_STORAGE_CAPABILITIES::asynchronous_ops is set. Asynchronous
+ * execution is optional even if 'asynchronous_ops' is set.
+ *
+ * @return
+ * If the range to be erased doesn't align with the erase_units of the
+ * respective start and end blocks, ARM_DRIVER_ERROR_PARAMETER is returned.
+ * If any part of the range is protected, ARM_STORAGE_ERROR_PROTECTED is
+ * returned. If any part of the range is not erasable,
+ * ARM_STORAGE_ERROR_NOT_ERASABLE is returned. All such sanity-check
+ * failures result in the error code being returned synchronously and the
+ * storage bytes within the range remain unaffected.
+ * Otherwise the function executes in the following ways:
+ * If asynchronous activity is launched, an invocation returns
+ * ARM_DRIVER_OK, and the caller can expect to receive a callback in the
+ * future with the number of successfully erased bytes passed in as
+ * the 'status' parameter. In the case of synchronous execution, control
+ * returns after completion with a positive erase-count. Return values
+ * less than ARM_DRIVER_OK (0) signify errors.
+ *
+ * @note Erase() may return a smaller (positive) value than the size of the
+ * requested range. The returned value indicates the actual number of bytes
+ * erased. It is the caller's responsibility to follow up with an appropriate
+ * request to complete the operation.
+ *
+ * @note in the case of a failed erase (except when
+ * ARM_DRIVER_ERROR_PARAMETER, ARM_STORAGE_ERROR_PROTECTED, or
+ * ARM_STORAGE_ERROR_NOT_ERASABLE is returned synchronously), the
+ * requested range should be assumed to be in an unknown state. The
+ * previous contents may not be retained.
+ */
+ int32_t (*Erase)(uint64_t addr, uint32_t size);
+
+ /**
+ * @brief Erase complete storage. Optional function for faster erase of the complete device.
+ *
+ * This optional function erases the complete device. If the device does not
+ * support global erase then the function returns the error value \ref
+ * ARM_DRIVER_ERROR_UNSUPPORTED. The data field \em 'erase_all' =
+ * \token{1} of the structure \ref ARM_STORAGE_CAPABILITIES encodes that
+ * \ref ARM_STORAGE_EraseAll is supported.
+ *
+ * @note This API may execute asynchronously if
+ * ARM_STORAGE_CAPABILITIES::asynchronous_ops is set. Asynchronous
+ * execution is optional even if 'asynchronous_ops' is set.
+ *
+ * @return
+ * If any part of the storage range is protected,
+ * ARM_STORAGE_ERROR_PROTECTED is returned. If any part of the storage
+ * range is not erasable, ARM_STORAGE_ERROR_NOT_ERASABLE is returned. All
+ * such sanity-check failures result in the error code being returned
+ * synchronously and the storage bytes within the range remain unaffected.
+ * Otherwise the function executes in the following ways:
+ * If asynchronous activity is launched, an invocation returns
+ * ARM_DRIVER_OK, and the caller can expect to receive a callback in the
+ * future with ARM_DRIVER_OK passed in as the 'status' parameter. In the
+ * case of synchronous execution, control returns after completion with a
+ * value of 1. Return values less than ARM_DRIVER_OK (0) signify errors.
+ */
+ int32_t (*EraseAll)(void);
+
+ /**
+ * @brief Get the status of the current (or previous) command executed by the
+ * storage controller; stored in the structure \ref ARM_STORAGE_STATUS.
+ *
+ * @return
+ * The status of the underlying controller.
+ *
+ * @note This API returns synchronously--it does not result in an invocation
+ * of a completion callback.
+ */
+ ARM_STORAGE_STATUS (*GetStatus)(void);
+
+ /**
+ * @brief Get information about the Storage device; stored in the structure \ref ARM_STORAGE_INFO.
+ *
+ * @param [out] info
+ * A caller-supplied buffer capable of being filled in with an
+ * \ref ARM_STORAGE_INFO.
+ *
+ * @return ARM_DRIVER_OK if a ARM_STORAGE_INFO structure containing top level
+ * metadata about the storage controller is filled into the supplied
+ * buffer, else an appropriate error value.
+ *
+ * @note It is the caller's responsibility to ensure that the buffer passed in
+ * is able to be initialized with a \ref ARM_STORAGE_INFO.
+ *
+ * @note This API returns synchronously--it does not result in an invocation
+ * of a completion callback.
+ */
+ int32_t (*GetInfo)(ARM_STORAGE_INFO *info);
+
+ /**
+ * \brief For memory-mapped storage, resolve an address relative to
+ * the storage controller into a memory address.
+ *
+ * @param addr
+ * This is the address for which we want a resolution to the
+ * processor's physical address space. It is an offset from the
+ * start of the storage map maintained by the owning storage
+ * controller.
+ *
+ * @return
+ * The resolved address in the processor's address space; else
+ * ARM_STORAGE_INVALID_ADDRESS, if no resolution is possible.
+ *
+ * @note This API returns synchronously. The invocation should return quickly,
+ * and result in a resolved address.
+ */
+ uint32_t (*ResolveAddress)(uint64_t addr);
+
+ /**
+ * @brief Advance to the successor of the current block (iterator), or fetch
+ * the first block (if 'prev_block' is passed in as NULL).
+ *
+ * @details This helper function fetches (an iterator to) the next block (or
+ * the first block if 'prev_block' is passed in as NULL). In the failure
+ * case, a terminating, invalid block iterator is filled into the out
+ * parameter: 'next_block'. In combination with \ref
+ * ARM_STORAGE_VALID_BLOCK(), it can be used to iterate over the sequence
+ * of blocks within the storage map:
+ *
+ * \code
+ * ARM_STORAGE_BLOCK block;
+ * for (drv->GetNextBlock(NULL, &block); ARM_STORAGE_VALID_BLOCK(&block); drv->GetNextBlock(&block, &block)) {
+ * // make use of block
+ * }
+ * \endcode
+ *
+ * @param[in] prev_block
+ * An existing block (iterator) within the same storage
+ * controller. The memory buffer holding this block is owned
+ * by the caller. This pointer may be NULL; if so, the
+ * invocation fills in the first block into the out parameter:
+ * 'next_block'.
+ *
+ * @param[out] next_block
+ * A caller-owned buffer large enough to be filled in with
+ * the following ARM_STORAGE_BLOCK. It is legal to provide the
+ * same buffer using 'next_block' as was passed in with 'prev_block'. It
+ * is also legal to pass a NULL into this parameter if the
+ * caller isn't interested in populating a buffer with the next
+ * block--i.e. if the caller only wishes to establish the
+ * presence of a next block.
+ *
+ * @return ARM_DRIVER_OK if a valid next block is found (or first block, if
+ * prev_block is passed as NULL); upon successful operation, the contents
+ * of the next (or first) block are filled into the buffer pointed to by
+ * the parameter 'next_block' and ARM_STORAGE_VALID_BLOCK(next_block) is
+ * guaranteed to be true. Upon reaching the end of the sequence of blocks
+ * (iterators), or in case the driver is unable to fetch information about
+ * the next (or first) block, an error (negative) value is returned and an
+ * invalid StorageBlock is populated into the supplied buffer. If
+ * prev_block is NULL, the first block is returned.
+ *
+ * @note This API returns synchronously--it does not result in an invocation
+ * of a completion callback.
+ */
+ int32_t (*GetNextBlock)(const ARM_STORAGE_BLOCK* prev_block, ARM_STORAGE_BLOCK *next_block);
+
+ /**
+ * @brief Find the storage block (iterator) encompassing a given storage address.
+ *
+ * @param[in] addr
+ * Storage address in bytes.
+ *
+ * @param[out] block
+ * A caller-owned buffer large enough to be filled in with the
+ * ARM_STORAGE_BLOCK encapsulating the given address. This value
+ * can also be passed in as NULL if the caller isn't interested
+ * in populating a buffer with the block--if the caller only
+ * wishes to establish the presence of a containing storage
+ * block.
+ *
+ * @return ARM_DRIVER_OK if a containing storage-block is found. In this case,
+ * if block is non-NULL, the buffer pointed to by it is populated with
+ * the contents of the storage block--i.e. if block is valid and a block is
+ * found, ARM_STORAGE_VALID_BLOCK(block) would return true following this
+ * call. If there is no storage block containing the given offset, or in
+ * case the driver is unable to resolve an address to a storage-block, an
+ * error (negative) value is returned and an invalid StorageBlock is
+ * populated into the supplied buffer.
+ *
+ * @note This API returns synchronously--it does not result in an invocation
+ * of a completion callback.
+ */
+ int32_t (*GetBlock)(uint64_t addr, ARM_STORAGE_BLOCK *block);
+} const ARM_DRIVER_STORAGE;
+
+#ifdef __cplusplus
+}
+#endif // __cplusplus
+
+#endif /* __DRIVER_STORAGE_H */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/ticker_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/ticker_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,116 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TICKER_API_H
+#define MBED_TICKER_API_H
+
+#include <stdint.h>
+#include "device.h"
+
+typedef uint32_t timestamp_t;
+
+/** Ticker's event structure
+ */
+typedef struct ticker_event_s {
+ timestamp_t timestamp; /**< Event's timestamp */
+ uint32_t id; /**< TimerEvent object */
+ struct ticker_event_s *next; /**< Next event in the queue */
+} ticker_event_t;
+
+typedef void (*ticker_event_handler)(uint32_t id);
+
+/** Ticker's interface structure - required API for a ticker
+ */
+typedef struct {
+ void (*init)(void); /**< Init function */
+ uint32_t (*read)(void); /**< Read function */
+ void (*disable_interrupt)(void); /**< Disable interrupt function */
+ void (*clear_interrupt)(void); /**< Clear interrupt function */
+ void (*set_interrupt)(timestamp_t timestamp); /**< Set interrupt function */
+} ticker_interface_t;
+
+/** Ticker's event queue structure
+ */
+typedef struct {
+ ticker_event_handler event_handler; /**< Event handler */
+ ticker_event_t *head; /**< A pointer to head */
+} ticker_event_queue_t;
+
+/** Ticker's data structure
+ */
+typedef struct {
+ const ticker_interface_t *interface; /**< Ticker's interface */
+ ticker_event_queue_t *queue; /**< Ticker's event queue */
+} ticker_data_t;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup hal_ticker Ticker HAL functions
+ * @{
+ */
+
+/** Initialize a ticker and set the event handler
+ *
+ * @param data The ticker's data
+ * @param handler A handler to be set
+ */
+void ticker_set_handler(const ticker_data_t *const data, ticker_event_handler handler);
+
+/** IRQ handler that goes through the events to trigger overdue events.
+ *
+ * @param data The ticker's data
+ */
+void ticker_irq_handler(const ticker_data_t *const data);
+
+/** Remove an event from the queue
+ *
+ * @param data The ticker's data
+ * @param obj The event object to be removed from the queue
+ */
+void ticker_remove_event(const ticker_data_t *const data, ticker_event_t *obj);
+
+/** Insert an event to the queue
+ *
+ * @param data The ticker's data
+ * @param obj The event object to be inserted to the queue
+ * @param timestamp The event's timestamp
+ * @param id The event object
+ */
+void ticker_insert_event(const ticker_data_t *const data, ticker_event_t *obj, timestamp_t timestamp, uint32_t id);
+
+/** Read the current ticker's timestamp
+ *
+ * @param data The ticker's data
+ * @return The current timestamp
+ */
+timestamp_t ticker_read(const ticker_data_t *const data);
+
+/** Read the next event's timestamp
+ *
+ * @param data The ticker's data
+ * @return 1 if timestamp is pending event, 0 if there's no event pending
+ */
+int ticker_get_next_timestamp(const ticker_data_t *const data, timestamp_t *timestamp);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/hal/us_ticker_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/hal/us_ticker_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,78 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_US_TICKER_API_H
+#define MBED_US_TICKER_API_H
+
+#include <stdint.h>
+#include "ticker_api.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup hal_UsTicker Microseconds Ticker Functions
+ * @{
+ */
+
+/** Get ticker's data
+ *
+ * @return The low power ticker data
+ */
+const ticker_data_t* get_us_ticker_data(void);
+
+
+/** The wrapper for ticker_irq_handler, to pass us ticker's data
+ *
+ */
+void us_ticker_irq_handler(void);
+
+/* HAL us ticker */
+
+/** Initialize the ticker
+ *
+ */
+void us_ticker_init(void);
+
+/** Read the current counter
+ *
+ * @return The current timer's counter value in microseconds
+ */
+uint32_t us_ticker_read(void);
+
+/** Set interrupt for specified timestamp
+ *
+ * @param timestamp The time in microseconds to be set
+ */
+void us_ticker_set_interrupt(timestamp_t timestamp);
+
+/** Disable us ticker interrupt
+ *
+ */
+void us_ticker_disable_interrupt(void);
+
+/** Clear us ticker interrupt
+ *
+ */
+void us_ticker_clear_interrupt(void);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/module.json
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/module.json Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,30 @@
+{
+ "name": "mbed-classic",
+ "version": "0.0.1",
+ "description": "mbed core SDK (for mbed 2.0, *not* mbedOS)",
+ "keywords": [
+ "mbed"
+ ],
+ "author": "Bogdan Marinescu <bogdan.marinescu@arm.com>",
+ "repository": {
+ "url": "git@github.com:mbedmicro/mbed.git",
+ "type": "git"
+ },
+ "homepage": "https://github.com/mbedmicro/mbed",
+ "licenses": [
+ {
+ "url": "https://spdx.org/licenses/Apache-2.0",
+ "type": "Apache-2.0"
+ }
+ ],
+ "extraIncludes": [
+ "api",
+ "hal",
+ "targets/hal",
+ "targets/cmsis"
+ ],
+ "dependencies": {
+ },
+ "targetDependencies": {
+ }
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets.json
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets.json Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2114 @@
+{
+ "Target": {
+ "core": null,
+ "default_toolchain": "ARM",
+ "supported_toolchains": null,
+ "extra_labels": [],
+ "is_disk_virtual": false,
+ "macros": [],
+ "device_has": [],
+ "features": [],
+ "detect_code": [],
+ "public": false,
+ "default_build": "standard"
+ },
+ "CM4_UARM": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "default_toolchain": "uARM",
+ "public": false,
+ "supported_toolchains": ["uARM"],
+ "default_build": "small"
+ },
+ "CM4_ARM": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "public": false,
+ "supported_toolchains": ["ARM"]
+ },
+ "CM4F_UARM": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "uARM",
+ "public": false,
+ "supported_toolchains": ["uARM"],
+ "default_build": "small"
+ },
+ "CM4F_ARM": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "public": false,
+ "supported_toolchains": ["ARM"]
+ },
+ "LPCTarget": {
+ "inherits": ["Target"],
+ "post_binary_hook": {"function": "LPCTargetCode.lpc_patch"},
+ "public": false
+ },
+ "LPC11C24": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "progen": {"target": "lpc11c24_301"},
+ "extra_labels": ["NXP", "LPC11XX_11CXX", "LPC11CXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "device_has": ["ANALOGIN", "CAN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC1114": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11XX_11CXX", "LPC11XX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc1114_102"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U24": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "LPC11U24_401"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "progen": {
+ "target": "lpc11u24_201"
+ },
+ "detect_code": ["1040"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "OC_MBUINO": {
+ "inherits": ["LPC11U24"],
+ "macros": ["TARGET_LPC11U24"],
+ "progen": {
+ "target": "lpc11u24_201"
+ },
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "LPC11U24_301": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC11U34_421": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small"
+ },
+ "MICRONFCBOARD": {
+ "inherits": ["LPC11U34_421"],
+ "macros": ["LPC11U34_421", "APPNEARME_MICRONFCBOARD"],
+ "extra_labels_add": ["APPNEARME_MICRONFCBOARD"],
+ "release_versions": ["2"]
+ },
+ "LPC11U35_401": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_401"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U35_501": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U35_501_IBDAP": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small"
+ },
+ "XADOW_M0": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U35_Y5_MBUG": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small"
+ },
+ "LPC11U37_501": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u37_501"
+ },
+ "default_build": "small"
+ },
+ "LPCCAPPUCCINO": {
+ "inherits": ["LPC11U37_501"],
+ "progen": {
+ "target": "lpc11u37_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "ARCH_GPRS": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "LPC11U37_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc11u37_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U68": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11U6X"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_CR", "GCC_ARM", "IAR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc11u68"
+ },
+ "detect_code": ["1168"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC1347": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M3",
+ "progen": {"target": "lpc1347"},
+ "extra_labels": ["NXP", "LPC13XX"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "LPC1549": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M3",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC15XX"],
+ "supported_toolchains": ["uARM", "GCC_CR", "GCC_ARM", "IAR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc1549"
+ },
+ "detect_code": ["1549"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "INTERRUPTIN", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC1768": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M3",
+ "extra_labels": ["NXP", "LPC176X", "MBED_LPC1768"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {"target": "mbed-lpc1768"},
+ "detect_code": ["1010"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "ARCH_PRO": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "extra_labels": ["NXP", "LPC176X"],
+ "macros": ["TARGET_LPC1768"],
+ "inherits": ["LPCTarget"],
+ "progen": {"target": "arch-pro"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "UBLOX_C027": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "extra_labels": ["NXP", "LPC176X"],
+ "macros": ["TARGET_LPC1768"],
+ "inherits": ["LPCTarget"],
+ "progen": {"target": "ublox-c027"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_RED", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "XBED_LPC1768": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "extra_labels": ["NXP", "LPC176X", "XBED_LPC1768"],
+ "macros": ["TARGET_LPC1768"],
+ "progen": {"target": "lpc1768"},
+ "detect_code": ["1010"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC2368": {
+ "inherits": ["LPCTarget"],
+ "core": "ARM7TDMI-S",
+ "progen": {"target": "lpc2368"},
+ "extra_labels": ["NXP", "LPC23XX"],
+ "supported_toolchains": ["GCC_ARM", "GCC_CR"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC2460": {
+ "inherits": ["LPCTarget"],
+ "core": "ARM7TDMI-S",
+ "progen": {"target": "lpc2460"},
+ "extra_labels": ["NXP", "LPC2460"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC810": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC81X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["uARM", "IAR", "GCC_ARM"],
+ "progen": {
+ "target": "lpc810"
+ },
+ "device_has": ["ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small"
+ },
+ "LPC812": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC81X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["uARM", "IAR", "GCC_ARM"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc812m101"
+ },
+ "detect_code": ["1050"],
+ "device_has": ["ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC824": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC82X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc824m201"
+ },
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "SSCI824": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC82X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["uARM", "GCC_ARM"],
+ "progen": {
+ "target": "ssci824"
+ },
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC4088": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M4F",
+ "extra_labels": ["NXP", "LPC408X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_CR", "GCC_ARM", "IAR"],
+ "post_binary_hook": {
+ "function": "LPC4088Code.binary_hook",
+ "toolchains": ["ARM_STD", "ARM_MICRO"]
+ },
+ "progen": {"target": "lpc4088"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "LPC4088_DM": {
+ "inherits": ["LPC4088"],
+ "release_versions": ["2", "5"]
+ },
+ "LPC4330_M4": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M4F",
+ "progen": {"target": "lpc4330"},
+ "extra_labels": ["NXP", "LPC43XX", "LPC4330"],
+ "supported_toolchains": ["ARM", "GCC_CR", "IAR", "GCC_ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC4330_M0": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "extra_labels": ["NXP", "LPC43XX", "LPC4330"],
+ "supported_toolchains": ["ARM", "GCC_CR", "IAR"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC4337": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M4F",
+ "progen": {"target": "lpc4337"},
+ "extra_labels": ["NXP", "LPC43XX", "LPC4337"],
+ "supported_toolchains": ["ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ERROR_RED", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "LPC1800": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M3",
+ "extra_labels": ["NXP", "LPC43XX"],
+ "public": false,
+ "supported_toolchains": ["ARM", "GCC_CR", "IAR"]
+ },
+ "LPC11U37H_401": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc11u37_401"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "ELEKTOR_COCORICO": {
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC81X"],
+ "supported_toolchains": ["uARM", "GCC_ARM", "IAR"],
+ "inherits": ["LPCTarget"],
+ "is_disk_virtual": true,
+ "detect_code": ["C000"],
+ "progen": {
+ "target": "cocorico"
+ },
+ "default_build": "small"
+ },
+ "KL05Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["Freescale", "KLXX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {
+ "target": "frdm-kl05z"
+ },
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "KL25Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["Freescale", "KLXX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-kl25z"},
+ "detect_code": ["0200"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "KL26Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["Freescale", "KLXX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "kl26z"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "KL46Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["Freescale", "KLXX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-kl46z"},
+ "detect_code": ["0220"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "K20D50M": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "extra_labels": ["Freescale", "K20XX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "progen": {"target": "frdm-k20d50m"},
+ "detect_code": ["0230"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "TEENSY3_1": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "extra_labels": ["Freescale", "K20XX", "K20DX256"],
+ "OUTPUT_EXT": "hex",
+ "is_disk_virtual": true,
+ "supported_toolchains": ["GCC_ARM", "ARM"],
+ "post_binary_hook": {
+ "function": "TEENSY3_1Code.binary_hook",
+ "toolchains": ["ARM_STD", "ARM_MICRO", "GCC_ARM"]
+ },
+ "progen": {"target": "teensy-31"},
+ "detect_code": ["0230"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "K22F": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM", "KPSDK_MCUS", "KPSDK_CODE"],
+ "is_disk_virtual": true,
+ "macros": ["CPU_MK22FN512VLH12", "FSL_RTOS_MBED"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-k22f"},
+ "detect_code": ["0231"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "KL27Z": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM"],
+ "macros": ["CPU_MKL27Z64VLH4", "FSL_RTOS_MBED"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "supported_form_factors": ["ARDUINO"],
+ "is_disk_virtual": true,
+ "default_toolchain": "ARM",
+ "detect_code": ["0261"],
+ "progen_target": {"target": "frdm-kl27z"},
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "standard",
+ "release_versions": ["2"]
+ },
+ "KL43Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM"],
+ "macros": ["CPU_MKL43Z256VLH4", "FSL_RTOS_MBED"],
+ "is_disk_virtual": true,
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-kl43z"},
+ "detect_code": ["0262"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "K64F": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM", "KPSDK_MCUS", "KPSDK_CODE", "MCU_K64F"],
+ "is_disk_virtual": true,
+ "macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-k64f"},
+ "detect_code": ["0240"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "STORAGE"],
+ "features": ["IPV4", "STORAGE"],
+ "release_versions": ["2", "5"]
+ },
+ "MTS_GAMBIT": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "GCC_ARM"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "KPSDK_MCUS", "KPSDK_CODE", "MCU_K64F"],
+ "is_disk_virtual": true,
+ "macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "TARGET_K64F"],
+ "progen": {"target": "mts-gambit"},
+ "device_has": ["I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "HEXIWEAR": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "MCU_K64F"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "TARGET_K64F"],
+ "is_disk_virtual": true,
+ "default_toolchain": "ARM",
+ "detect_code": ["0214"],
+ "progen": {"target": "hexiwear-k64f"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "standard",
+ "release_versions": ["2", "5"]
+ },
+ "K66F": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM"],
+ "is_disk_virtual": true,
+ "macros": ["CPU_MK66FN2M0VMD18", "FSL_RTOS_MBED", "MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-k66f"},
+ "detect_code": ["0311"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F030R8": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F030R8"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f030r8"},
+ "detect_code": ["0725"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F031K6": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F031K6"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f031k6"},
+ "detect_code": ["0791"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F042K6": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F042K6"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f042k6"},
+ "detect_code": ["0785"],
+ "device_has": ["ANALOGIN", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F070RB": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F070RB"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f070rb"},
+ "detect_code": ["0755"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F072RB": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F072RB"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f072rb"},
+ "detect_code": ["0730"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F091RC": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F091RC"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f091rc"},
+ "detect_code": ["0750"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F103RB": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M3",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F1", "STM32F103RB"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f103rb"},
+ "detect_code": ["0700"],
+ "device_has": ["ANALOGIN", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F207ZG": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M3",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F2", "STM32F207ZG"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f207zg"},
+ "detect_code": ["0835"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F302R8": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F302R8"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f302r8"},
+ "detect_code": ["0705"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F303K8": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F303K8"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f303k8"},
+ "detect_code": ["0775"],
+ "default_lib": "small",
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F303RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F303RE"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f303re"},
+ "detect_code": ["0745"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F303ZE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "fpu": "single",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F303ZE"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f303ze"},
+ "detect_code": ["0745"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F334R8": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F334R8"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f334r8"},
+ "detect_code": ["0735"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F401RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F401RE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f401re"},
+ "detect_code": ["0720"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F410RB": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F410RB","STM32F410Rx"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f410rb"},
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "detect_code": ["0740"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F411RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f411re"},
+ "detect_code": ["0740"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "ELMO_F411RE": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "inherits": ["Target"],
+ "detect_code": ["----"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F429ZI": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F429", "STM32F429ZI", "STM32F429xx"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "progen": {"target": "nucleo-f429zi"},
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT", "DEVICE_RTC_LSI=1"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "detect_code": ["0796"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F446RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F446RE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f446re"},
+ "detect_code": ["0777"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F446ZE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F446ZE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f446ze"},
+ "detect_code": ["0778"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+
+ "B96B_F446VE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F446VE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "detect_code": ["0840"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F746ZG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M7F",
+ "extra_labels": ["STM", "STM32F7", "STM32F746", "STM32F746ZG"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "progen": {
+ "target": "nucleo-f746zg",
+ "iar": {
+ "template": ["iar_nucleo_f746zg.ewp.tmpl"]
+ }
+ },
+ "supported_form_factors": ["ARDUINO"],
+ "detect_code": ["0816"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F767ZI": {
+ "inherits": ["Target"],
+ "core": "Cortex-M7FD",
+ "extra_labels": ["STM", "STM32F7", "STM32F767", "STM32F767ZI"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "progen": {"target": "nucleo-f767zi"},
+ "detect_code": ["0818"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_L011K4": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["STM", "STM32L0", "STM32L011K4"],
+ "supported_toolchains": ["uARM"],
+ "default_toolchain": "uARM",
+ "supported_form_factors": ["ARDUINO"],
+ "detect_code": ["0780"],
+ "progen": {"target":"nucleo-l011k4"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+
+ "NUCLEO_L031K6": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "extra_labels": ["STM", "STM32L0", "STM32L031K6"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "default_toolchain": "uARM",
+ "supported_form_factors": ["ARDUINO"],
+ "detect_code": ["0790"],
+ "progen": {"target": "nucleo-l031k6"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_L053R8": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L0", "STM32L053R8"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l053r8"},
+ "detect_code": ["0715"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_L073RZ": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L0", "STM32L073RZ"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l073rz"},
+ "detect_code": ["0760"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_L152RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M3",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L1", "STM32L152RE"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l152re"},
+ "detect_code": ["0710"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_L432KC": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L4", "STM32L432KC"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l432kc"},
+ "detect_code": ["0770"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "CAN", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_L476RG": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L4", "STM32L476RG"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l476rg"},
+ "detect_code": ["0765"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "STM32F3XX": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3XX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"]
+ },
+ "STM32F407": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "extra_labels": ["STM", "STM32F4", "STM32F4XX"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"]
+ },
+ "ARCH_MAX": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "program_cycle_s": 2,
+ "extra_labels": ["STM", "STM32F4", "STM32F407", "STM32F407VG"],
+ "macros": ["LSI_VALUE=32000"],
+ "inherits": ["Target"],
+ "progen": {"target": "arch-max"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "DISCO_F051R8": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F051", "STM32F051R8"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "DISCO_F100RB": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F1", "STM32F100RB"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "DISCO_F303VC": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F303", "STM32F303VC"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "DISCO_F334C8": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F334C8"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "progen": {"target": "disco-f334c8"},
+ "detect_code": ["0810"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "DISCO_F407VG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "progen": {"target": "disco-f407vg"},
+ "extra_labels": ["STM", "STM32F4", "STM32F407", "STM32F407VG"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "DISCO_F429ZI": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F429", "STM32F429ZI", "STM32F429xx"],
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT", "DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "progen": {"target": "disco-f429zi"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "DISCO_F469NI": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F469", "STM32F469NI", "STM32F469xx"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "progen": {"target": "disco-f469ni"},
+ "detect_code": ["0788"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "DISCO_L053C8": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L0", "STM32L053C8"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "progen": {"target": "disco-l053c8"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "DISCO_F746NG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M7F",
+ "extra_labels": ["STM", "STM32F7", "STM32F746", "STM32F746NG"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "progen": {"target": "disco-f746ng"},
+ "detect_code": ["0815"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "DISCO_F769NI": {
+ "inherits": ["Target"],
+ "core": "Cortex-M7FD",
+ "extra_labels": ["STM", "STM32F7", "STM32F769", "STM32F769NI"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "progen": {"target": "disco-f769ni"},
+ "detect_code": ["0817"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2"]
+ },
+ "DISCO_L476VG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L4", "STM32L476VG"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "progen": {"target": "disco-l476vg"},
+ "detect_code": ["0820"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MTS_MDOT_F405RG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["STM", "STM32F4", "STM32F405RG"],
+ "is_disk_virtual": true,
+ "macros": ["HSE_VALUE=26000000", "OS_CLOCK=48000000"],
+ "progen": {"target": "mts-mdot-f405rg"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "MTS_MDOT_F411RE": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+ "macros": ["HSE_VALUE=26000000", "OS_CLOCK=96000000", "USE_PLL_HSE_EXTC=0", "VECT_TAB_OFFSET=0x00010000"],
+ "post_binary_hook": {
+ "function": "MTSCode.combine_bins_mts_dot",
+ "toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO"]
+ },
+ "progen": {"target": "mts-mdot-f411re"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MTS_DRAGONFLY_F411RE": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+ "macros": ["HSE_VALUE=26000000", "VECT_TAB_OFFSET=0x08010000"],
+ "post_binary_hook": {
+ "function": "MTSCode.combine_bins_mts_dragonfly",
+ "toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO"]
+ },
+ "progen": {"target": "mts-dragonfly-f411re"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MOTE_L152RC": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32L1", "STM32L152RC"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "progen": {"target": "stm32l151rc"},
+ "detect_code": ["4100"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "DISCO_F401VC": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "GCC_ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F401", "STM32F401VC"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "UBLOX_C029": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "uARM",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["STM", "STM32F4", "STM32F439", "STM32F439ZI"],
+ "macros": ["HSE_VALUE=24000000", "HSE_STARTUP_TIMEOUT=5000"],
+ "inherits": ["Target"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small"
+ },
+ "NZ32_SC151": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "default_toolchain": "uARM",
+ "program_cycle_s": 1.5,
+ "extra_labels": ["STM", "STM32L1", "STM32L151RC"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "progen": {"target": "stm32l151rc"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small"
+ },
+ "MCU_NRF51": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "OVERRIDE_BOOTLOADER_FILENAME": "nrf51822_bootloader.hex",
+ "macros": ["NRF51", "TARGET_NRF51822"],
+ "MERGE_BOOTLOADER": false,
+ "extra_labels": ["NORDIC", "MCU_NRF51", "MCU_NRF51822"],
+ "OUTPUT_EXT": "hex",
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_ARM"],
+ "public": false,
+ "MERGE_SOFT_DEVICE": true,
+ "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+ {
+ "boot": "s130_nrf51_1.0.0_bootloader.hex",
+ "name": "s130_nrf51_1.0.0_softdevice.hex",
+ "offset": 114688
+ },
+ {
+ "boot": "s110_nrf51822_8.0.0_bootloader.hex",
+ "name": "s110_nrf51822_8.0.0_softdevice.hex",
+ "offset": 98304
+ },
+ {
+ "boot": "s110_nrf51822_7.1.0_bootloader.hex",
+ "name": "s110_nrf51822_7.1.0_softdevice.hex",
+ "offset": 90112
+ },
+ {
+ "boot": "s110_nrf51822_7.0.0_bootloader.hex",
+ "name": "s110_nrf51822_7.0.0_softdevice.hex",
+ "offset": 90112
+ },
+ {
+ "boot": "s110_nrf51822_6.0.0_bootloader.hex",
+ "name": "s110_nrf51822_6.0.0_softdevice.hex",
+ "offset": 81920
+ }
+ ],
+ "detect_code": ["1070"],
+ "post_binary_hook": {
+ "function": "MCU_NRF51Code.binary_hook",
+ "toolchains": ["ARM_STD", "GCC_ARM"]
+ },
+ "program_cycle_s": 6,
+ "features": ["BLE"]
+ },
+ "MCU_NRF51_16K_BASE": {
+ "inherits": ["MCU_NRF51"],
+ "extra_labels_add": ["MCU_NORDIC_16K", "MCU_NRF51_16K"],
+ "macros_add": ["TARGET_MCU_NORDIC_16K", "TARGET_MCU_NRF51_16K"],
+ "public": false,
+ "default_build": "small"
+ },
+ "MCU_NRF51_16K_BOOT_BASE": {
+ "inherits": ["MCU_NRF51_16K_BASE"],
+ "MERGE_BOOTLOADER": true,
+ "extra_labels_add": ["MCU_NRF51_16K_BOOT"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_BOOT", "TARGET_OTA_ENABLED"],
+ "public": false
+ },
+ "MCU_NRF51_16K_OTA_BASE": {
+ "inherits": ["MCU_NRF51_16K_BASE"],
+ "public": false,
+ "extra_labels_add": ["MCU_NRF51_16K_OTA"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_OTA", "TARGET_OTA_ENABLED"],
+ "MERGE_SOFT_DEVICE": false
+ },
+ "MCU_NRF51_16K": {
+ "inherits": ["MCU_NRF51_16K_BASE"],
+ "extra_labels_add": ["MCU_NRF51_16K_S130"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_S130"],
+ "public": false
+ },
+ "MCU_NRF51_S110": {
+ "extra_labels_add": ["MCU_NRF51_16K_S110"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_S110"],
+ "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+ {
+ "name": "s110_nrf51822_8.0.0_softdevice.hex",
+ "boot": "s110_nrf51822_8.0.0_bootloader.hex",
+ "offset": 98304
+ },
+ {
+ "name": "s110_nrf51822_7.1.0_softdevice.hex",
+ "boot": "s110_nrf51822_7.1.0_bootloader.hex",
+ "offset": 90112
+ }
+ ],
+ "public": false
+ },
+ "MCU_NRF51_16K_S110": {
+ "inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_BASE"],
+ "public": false
+ },
+ "MCU_NRF51_16K_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT_BASE"],
+ "extra_labels_add": ["MCU_NRF51_16K_S130"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_S130"],
+ "public": false
+ },
+ "MCU_NRF51_16K_BOOT_S110": {
+ "inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_BOOT_BASE"],
+ "public": false
+ },
+ "MCU_NRF51_16K_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA_BASE"],
+ "extra_labels_add": ["MCU_NRF51_16K_S130"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_S130"],
+ "public": false
+ },
+ "MCU_NRF51_16K_OTA_S110": {
+ "inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_OTA_BASE"],
+ "public": false
+ },
+ "MCU_NRF51_32K": {
+ "inherits": ["MCU_NRF51"],
+ "extra_labels_add": ["MCU_NORDIC_32K", "MCU_NRF51_32K"],
+ "macros_add": ["TARGET_MCU_NORDIC_32K", "TARGET_MCU_NRF51_32K"],
+ "public": false
+ },
+ "MCU_NRF51_32K_BOOT": {
+ "inherits": ["MCU_NRF51_32K"],
+ "MERGE_BOOTLOADER": true,
+ "extra_labels_add": ["MCU_NRF51_32K_BOOT"],
+ "macros_add": ["TARGET_MCU_NRF51_32K_BOOT", "TARGET_OTA_ENABLED"],
+ "public": false
+ },
+ "MCU_NRF51_32K_OTA": {
+ "inherits": ["MCU_NRF51_32K"],
+ "public": false,
+ "extra_labels_add": ["MCU_NRF51_32K_OTA"],
+ "macros_add": ["TARGET_MCU_NRF51_32K_OTA", "TARGET_OTA_ENABLED"],
+ "MERGE_SOFT_DEVICE": false
+ },
+ "NRF51822": {
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "mkit"},
+ "extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
+ "macros_add": ["TARGET_NRF51822_MKIT"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "NRF51822_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
+ "macros_add": ["TARGET_NRF51822_MKIT"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "NRF51822_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
+ "macros_add": ["TARGET_NRF51822_MKIT"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "ARCH_BLE": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "arch-ble"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "ARCH_BLE_BOOT": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["ARCH_BLE"],
+ "macros_add": ["TARGET_ARCH_BLE"]
+ },
+ "ARCH_BLE_OTA": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["ARCH_BLE"],
+ "macros_add": ["TARGET_ARCH_BLE"]
+ },
+ "ARCH_LINK": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K"],
+ "extra_labels_add": ["ARCH_BLE"],
+ "macros_add": ["TARGET_ARCH_BLE"]
+ },
+ "ARCH_LINK_BOOT": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["ARCH_BLE", "ARCH_LINK"],
+ "macros_add": ["TARGET_ARCH_BLE", "TARGET_ARCH_LINK"]
+ },
+ "ARCH_LINK_OTA": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["ARCH_BLE", "ARCH_LINK"],
+ "macros_add": ["TARGET_ARCH_BLE", "TARGET_ARCH_LINK"]
+ },
+ "SEEED_TINY_BLE": {
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "seed-tinyble"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "SEEED_TINY_BLE_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["SEEED_TINY_BLE"],
+ "macros_add": ["TARGET_SEEED_TINY_BLE"]
+ },
+ "SEEED_TINY_BLE_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["SEEED_TINY_BLE"],
+ "macros_add": ["TARGET_SEEED_TINY_BLE"]
+ },
+ "HRM1017": {
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "hrm1017"},
+ "macros_add": ["TARGET_NRF_LFCLK_RC"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "HRM1017_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["HRM1017"],
+ "macros_add": ["TARGET_HRM1017", "TARGET_NRF_LFCLK_RC"]
+ },
+ "HRM1017_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["HRM1017"],
+ "macros_add": ["TARGET_HRM1017", "TARGET_NRF_LFCLK_RC"]
+ },
+ "RBLAB_NRF51822": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "rblab-nrf51822"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "RBLAB_NRF51822_BOOT": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["RBLAB_NRF51822"],
+ "macros_add": ["TARGET_RBLAB_NRF51822"]
+ },
+ "RBLAB_NRF51822_OTA": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["RBLAB_NRF51822"],
+ "macros_add": ["TARGET_RBLAB_NRF51822"]
+ },
+ "RBLAB_BLENANO": {
+ "inherits": ["MCU_NRF51_16K"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "RBLAB_BLENANO_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["RBLAB_BLENANO"],
+ "macros_add": ["TARGET_RBLAB_BLENANO"]
+ },
+ "RBLAB_BLENANO_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["RBLAB_BLENANO"],
+ "macros_add": ["TARGET_RBLAB_BLENANO"]
+ },
+ "NRF51822_Y5_MBUG": {
+ "inherits": ["MCU_NRF51_16K"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "WALLBOT_BLE": {
+ "inherits": ["MCU_NRF51_16K"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "WALLBOT_BLE_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["WALLBOT_BLE"],
+ "macros_add": ["TARGET_WALLBOT_BLE"]
+ },
+ "WALLBOT_BLE_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["WALLBOT_BLE"],
+ "macros_add": ["TARGET_WALLBOT_BLE"]
+ },
+ "DELTA_DFCM_NNN40": {
+ "inherits": ["MCU_NRF51_32K"],
+ "program_cycle_s": 10,
+ "progen": {"target": "dfcm-nnn40"},
+ "macros_add": ["TARGET_NRF_LFCLK_RC"],
+ "device_has": ["ANALOGIN", "DEBUG_AWARENESS", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "DELTA_DFCM_NNN40_BOOT": {
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "program_cycle_s": 10,
+ "extra_labels_add": ["DELTA_DFCM_NNN40"],
+ "macros_add": ["TARGET_DELTA_DFCM_NNN40", "TARGET_NRF_LFCLK_RC"]
+ },
+ "DELTA_DFCM_NNN40_OTA": {
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "program_cycle_s": 10,
+ "extra_labels_add": ["DELTA_DFCM_NNN40"],
+ "macros_add": ["TARGET_DELTA_DFCM_NNN40", "TARGET_NRF_LFCLK_RC"]
+ },
+ "NRF51_DK_LEGACY": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_32K"],
+ "progen": {"target": "nrf51-dk"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "NRF51_DK_BOOT": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "extra_labels_add": ["NRF51_DK"],
+ "macros_add": ["TARGET_NRF51_DK"]
+ },
+ "NRF51_DK_OTA": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "extra_labels_add": ["NRF51_DK"],
+ "macros_add": ["TARGET_NRF51_DK"]
+ },
+ "NRF51_DONGLE": {
+ "inherits": ["MCU_NRF51_32K"],
+ "progen": {"target": "nrf51-dongle"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "NRF51_DONGLE_BOOT": {
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "extra_labels_add": ["NRF51_DONGLE"],
+ "macros_add": ["TARGET_NRF51_DONGLE"]
+ },
+ "NRF51_DONGLE_OTA": {
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "extra_labels_add": ["NRF51_DONGLE"],
+ "macros_add": ["TARGET_NRF51_DONGLE"]
+ },
+ "NRF51_MICROBIT": {
+ "inherits": ["MCU_NRF51_16K_S110"],
+ "macros_add": ["TARGET_NRF_LFCLK_RC"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "NRF51_MICROBIT_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT_S110"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+ },
+ "NRF51_MICROBIT_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA_S110"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+ },
+ "NRF51_MICROBIT_B": {
+ "inherits": ["MCU_NRF51_16K"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "NRF51_MICROBIT_B_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+ },
+ "NRF51_MICROBIT_B_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+ },
+ "MTM_MTCONNECT04S": {
+ "inherits": ["MCU_NRF51_32K"],
+ "progen": {"target": "mtm-mtconnect04s"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "MTM_MTCONNECT04S_BOOT": {
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "extra_labels_add": ["MTM_CONNECT04S"],
+ "macros_add": ["TARGET_MTM_CONNECT04S"]
+ },
+ "MTM_MTCONNECT04S_OTA": {
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "extra_labels_add": ["MTM_CONNECT04S"],
+ "macros_add": ["TARGET_MTM_CONNECT04S"]
+ },
+
+ "TY51822R3": {
+ "inherits": ["MCU_NRF51_32K_UNIFIED"],
+ "macros_add": ["TARGET_NRF_32MHZ_XTAL"],
+ "progen": {"target": "ty51822r3"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "detect_code": ["1019"],
+ "release_versions": ["2", "5"],
+ "overrides": { "uart_hwfc": 0 }
+ },
+ "TY51822R3_BOOT": {
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "extra_labels_add": ["TY51822R3"],
+ "macros_add": ["TARGET_TY51822R3", "TARGET_NRF_32MHZ_XTAL"]
+ },
+ "TY51822R3_OTA": {
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "extra_labels_add": ["NRF51_DK"],
+ "macros_add": ["TARGET_TY51822R3", "TARGET_NRF_32MHZ_XTAL"]
+ },
+ "ARM_MPS2_Target": {
+ "inherits": ["Target"],
+ "public": false,
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
+ },
+ "ARM_MPS2_M0": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M0",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M0"],
+ "macros": ["CMSDK_CM0"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_MPS2_M0P": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M0+",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M0P"],
+ "macros": ["CMSDK_CM0plus"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_MPS2_M1": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M1",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M1"],
+ "macros": ["CMSDK_CM1"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
+ },
+ "ARM_MPS2_M3": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M3"],
+ "macros": ["CMSDK_CM3"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_MPS2_M4": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M4"],
+ "macros": ["CMSDK_CM4"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_MPS2_M7": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M7",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M7"],
+ "macros": ["CMSDK_CM7"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_IOTSS_Target": {
+ "inherits": ["Target"],
+ "public": false,
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
+ },
+ "ARM_IOTSS_BEID": {
+ "inherits": ["ARM_IOTSS_Target"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "IOTSS", "IOTSS_BEID"],
+ "macros": ["CMSDK_BEID"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_BEETLE_SOC": {
+ "inherits": ["ARM_IOTSS_Target"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "extra_labels": ["ARM_SSG", "BEETLE"],
+ "macros": ["CMSDK_BEETLE", "WSF_MS_PER_TICK=20", "WSF_TOKEN_ENABLED=FALSE", "WSF_TRACE_ENABLED=TRUE", "WSF_ASSERT_ENABLED=FALSE", "WSF_PRINTF_MAX_LEN=128", "ASIC", "CONFIG_HOST_REV=0x20", "CONFIG_ALLOW_DEEP_SLEEP=FALSE", "HCI_VS_TARGET", "CONFIG_ALLOW_SETTING_WRITE=TRUE", "WSF_MAX_HANDLERS=20", "NO_LEDS"],
+ "progen": {
+ "target": "beetle",
+ "uvision5": {
+ "template": ["uvision5_arm_beetle_soc.uvproj.tmpl"]
+ }
+ },
+ "device_has": ["ANALOGIN", "CLCD", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SLEEP", "SPI"],
+ "features": ["BLE"],
+ "release_versions": ["2", "5"]
+ },
+ "RZ_A1H": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-A9",
+ "program_cycle_s": 2,
+ "extra_labels": ["RENESAS", "MBRZA1H"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {
+ "target": "gr-peach",
+ "iar": {
+ "template": ["iar_rz_a1h.ewp.tmpl"]
+ }
+ },
+ "device_has": ["ANALOGIN", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "VK_RZ_A1H": {
+ "inherits": ["Target"],
+ "core": "Cortex-A9",
+ "extra_labels": ["RENESAS", "VKRZA1H"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "progen": {
+ "target": "vk-rza1h",
+ "iar": {
+ "template": ["iar_rz_a1h.ewp.tmpl"]
+ }
+ },
+ "program_cycle_s": 2,
+ "device_has": ["ANALOGIN", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "default_build": "standard",
+ "release_versions": ["2", "5"]
+ },
+ "MAXWSNENV": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "macros": ["__SYSTEM_HFX=24000000"],
+ "extra_labels": ["Maxim", "MAX32610"],
+ "supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
+ "progen": {"target": "maxwsnenv"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MAX32600MBED": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "macros": ["__SYSTEM_HFX=24000000"],
+ "extra_labels": ["Maxim", "MAX32600"],
+ "supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
+ "progen": {"target": "max32600mbed"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MAX32620HSP": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "extra_labels": ["Maxim", "MAX32620"],
+ "supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
+ "progen": {"target": "max32620hsp"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "EFM32GG_STK3700": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "macros": ["EFM32GG990F1024"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "efm32gg-stk"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32LG_STK3600": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "macros": ["EFM32LG990F256"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "efm32lg-stk"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32WG_STK3800": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "macros": ["EFM32WG990F256"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "efm32wg-stk"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32ZG_STK3200": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "supported_toolchains": ["GCC_ARM", "uARM"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "macros": ["EFM32ZG222F32"],
+ "progen": {
+ "target": "efm32zg-stk"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32HG_STK3400": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "supported_toolchains": ["GCC_ARM", "uARM"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "macros": ["EFM32HG322F64"],
+ "progen": {
+ "target": "efm32hg-stk"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32PG_STK3401": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "macros": ["EFM32PG1B200F256GM48"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
+ "progen": {"target": "efm32pg-stk"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "forced_reset_timeout": 2,
+ "release_versions": ["2", "5"]
+ },
+ "WIZWIKI_W7500": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500"],
+ "supported_toolchains": ["uARM", "ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "wizwiki-w7500"},
+ "device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "WIZWIKI_W7500P": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500P"],
+ "supported_toolchains": ["uARM", "ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "wizwiki-w7500p"},
+ "device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "WIZWIKI_W7500ECO": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "progen": {"target": "wizwiki_w7500eco"},
+ "extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500ECO"],
+ "supported_toolchains": ["uARM", "ARM"],
+ "device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "SAMR21G18A": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "macros": ["__SAMR21G18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "extra_labels": ["Atmel", "SAM_CortexM0P", "SAMR21"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "samr21g18a"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "release_versions": ["2"]
+ },
+ "SAMD21J18A": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "macros": ["__SAMD21J18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "extra_labels": ["Atmel", "SAM_CortexM0P", "SAMD21"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "samd21j18a"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "release_versions": ["2"]
+ },
+ "SAMD21G18A": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "macros": ["__SAMD21G18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "extra_labels": ["Atmel", "SAM_CortexM0P", "SAMD21"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "samd21g18a"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "release_versions": ["2"]
+ },
+ "SAML21J18A": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "macros": ["__SAML21J18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "extra_labels": ["Atmel", "SAM_CortexM0P", "SAML21"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "samr21j18a"},
+ "progen_target": "samr21j18a",
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"]
+ },
+ "SAMG55J19": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "extra_labels": ["Atmel", "SAM_CortexM4", "SAMG55"],
+ "macros": ["__SAMG55J19__", "BOARD=75", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "default_toolchain": "ARM",
+ "progen": {"target": "samg55j19"},
+ "progen_target": "samg55j19",
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "default_build": "standard"
+ },
+ "MCU_NRF51_UNIFIED": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "OVERRIDE_BOOTLOADER_FILENAME": "nrf51822_bootloader.hex",
+ "macros": [
+ "NRF51",
+ "TARGET_NRF51822",
+ "BLE_STACK_SUPPORT_REQD",
+ "SOFTDEVICE_PRESENT",
+ "S130",
+ "TARGET_MCU_NRF51822"
+ ],
+ "MERGE_BOOTLOADER": false,
+ "extra_labels": ["NORDIC", "MCU_NRF51", "MCU_NRF51822_UNIFIED", "NRF5"],
+ "OUTPUT_EXT": "hex",
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "public": false,
+ "MERGE_SOFT_DEVICE": true,
+ "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+ {
+ "boot": "",
+ "name": "s130_nrf51_2.0.0_softdevice.hex",
+ "offset": 110592
+ }
+ ],
+ "detect_code": ["1070"],
+ "post_binary_hook": {
+ "function": "MCU_NRF51Code.binary_hook",
+ "toolchains": ["ARM_STD", "GCC_ARM", "IAR"]
+ },
+ "program_cycle_s": 6,
+ "features": ["BLE"],
+ "config":{
+ "lf_clock_src": {
+ "value": "NRF_LF_SRC_XTAL",
+ "macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_SRC"
+ },
+ "uart_hwfc": {
+ "help": "Value: 1 for enable, 0 for disable",
+ "value": 1,
+ "macro_name": "MBED_CONF_NORDIC_UART_HWFC"
+ }
+ }
+ },
+ "MCU_NRF51_32K_UNIFIED": {
+ "inherits": ["MCU_NRF51_UNIFIED"],
+ "extra_labels_add": ["MCU_NORDIC_32K", "MCU_NRF51_32K"],
+ "macros_add": ["TARGET_MCU_NORDIC_32K", "TARGET_MCU_NRF51_32K"],
+ "public": false
+ },
+ "NRF51_DK": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_32K_UNIFIED"],
+ "progen": {"target": "nrf51-dk"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "release_versions": ["2", "5"]
+ },
+ "MCU_NRF52": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "macros": ["NRF52", "TARGET_NRF52832", "BLE_STACK_SUPPORT_REQD", "SOFTDEVICE_PRESENT", "S132"],
+ "extra_labels": ["NORDIC", "MCU_NRF52", "MCU_NRF52832", "NRF5"],
+ "OUTPUT_EXT": "hex",
+ "is_disk_virtual": true,
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "public": false,
+ "detect_code": ["1101"],
+ "program_cycle_s": 6,
+ "MERGE_SOFT_DEVICE": true,
+ "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+ {
+ "boot": "",
+ "name": "s132_nrf52_2.0.0_softdevice.hex",
+ "offset": 114688
+ }
+ ],
+ "post_binary_hook": {
+ "function": "MCU_NRF51Code.binary_hook",
+ "toolchains": ["ARM_STD", "GCC_ARM", "IAR"]
+ },
+ "MERGE_BOOTLOADER": false,
+ "features": ["BLE"],
+ "config":{
+ "lf_clock_src": {
+ "value": "NRF_LF_SRC_XTAL",
+ "macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_SRC"
+ },
+ "uart_hwfc": {
+ "help": "Value: 1 for enable, 0 for disable",
+ "value": 1,
+ "macro_name": "MBED_CONF_NORDIC_UART_HWFC"
+ }
+ }
+ },
+ "NRF52_DK": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF52"],
+ "progen": {"target": "nrf52-dk"},
+ "macros_add": [
+ "BOARD_PCA10040",
+ "NRF52_PAN_12",
+ "NRF52_PAN_15",
+ "NRF52_PAN_58",
+ "NRF52_PAN_55",
+ "NRF52_PAN_54",
+ "NRF52_PAN_31",
+ "NRF52_PAN_30",
+ "NRF52_PAN_51",
+ "NRF52_PAN_36",
+ "NRF52_PAN_53",
+ "S132",
+ "CONFIG_GPIO_AS_PINRESET",
+ "BLE_STACK_SUPPORT_REQD",
+ "SWI_DISABLE0",
+ "NRF52_PAN_20",
+ "NRF52_PAN_64",
+ "NRF52_PAN_62",
+ "NRF52_PAN_63"
+ ],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "release_versions": ["2", "5"]
+ },
+ "DELTA_DFBM_NQ620": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF52"],
+ "progen": {"target": "dfbm-nq620"},
+ "macros_add": [
+ "BOARD_PCA10040",
+ "NRF52_PAN_12",
+ "NRF52_PAN_15",
+ "NRF52_PAN_58",
+ "NRF52_PAN_55",
+ "NRF52_PAN_54",
+ "NRF52_PAN_31",
+ "NRF52_PAN_30",
+ "NRF52_PAN_51",
+ "NRF52_PAN_36",
+ "NRF52_PAN_53",
+ "S132",
+ "CONFIG_GPIO_AS_PINRESET",
+ "BLE_STACK_SUPPORT_REQD",
+ "SWI_DISABLE0",
+ "NRF52_PAN_20",
+ "NRF52_PAN_64",
+ "NRF52_PAN_62",
+ "NRF52_PAN_63"
+ ],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "release_versions": ["2", "5"]
+ },
+ "BLUEPILL_F103C8": {
+ "core": "Cortex-M3",
+ "default_toolchain": "GCC_ARM",
+ "extra_labels": ["STM", "STM32F1", "STM32F103C8"],
+ "supported_toolchains": ["GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "bluepill-f103c8"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "NUMAKER_PFM_NUC472": {
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["NUVOTON", "NUC472", "NUMAKER_PFM_NUC472"],
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "numaker-pfm-nuc472"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NCS36510": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "extra_labels": ["ONSEMI"],
+ "post_binary_hook": {"function": "NCS36510TargetCode.ncs36510_addfib"},
+ "macros": ["REVD", "CM3", "CPU_NCS36510", "TARGET_NCS36510"],
+ "progen": {"target": "ncs36510"},
+ "progen_target": "ncs36510",
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "device_has": ["ANALOGIN", "SERIAL", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI"],
+ "release_versions": ["2", "5"]
+ }
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.S --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.S Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,342 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f401xe.s +;* Author : MCD Application Team +;* Version : V2.1.0 +;* Date : 19-June-2014 +;* Description : STM32F401xe devices vector table for MDK-ARM_STD toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; 0x20018000 +;******************************************************************************* + + +__initial_sp EQU 0x20018000; Top of RAM + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD 0 ; Reserved + DCD SDIO_IRQHandler ; SDIO + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FPU_IRQHandler ; FPU + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI4_IRQHandler ; SPI4 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT SPI4_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_TIM10_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +OTG_FS_WKUP_IRQHandler +DMA1_Stream7_IRQHandler +SDIO_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +OTG_FS_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +FPU_IRQHandler +SPI4_IRQHandler + + B . + + ENDP + + ALIGN + END
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f401xe.sct
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f401xe.sct Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F401RE: 384KB FLASH + 96KB SRAM
+LR_IROM1 0x08000000 0x60000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x60000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 101 vectors = 404 bytes (0x194) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x194) (0x18000-0x194) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f4xx.h" +#include "cmsis_nvic.h" + +#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM
+#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+ uint32_t *vectors = (uint32_t *)SCB->VTOR;
+ uint32_t i;
+
+ // Copy and switch to dynamic vectors if the first time called
+ if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+ uint32_t *old_vectors = vectors;
+ vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+ for (i=0; i<NVIC_NUM_VECTORS; i++) {
+ vectors[i] = old_vectors[i];
+ }
+ SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+ }
+ vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+ uint32_t *vectors = (uint32_t*)SCB->VTOR;
+ return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F401RE
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 85 vectors = 340 bytes from 0x40 to ...
+// Total: 101 vectors = 404 bytes (0x194) to be reserved in RAM
+#define NVIC_NUM_VECTORS 101
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,142 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.c
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#include "hal_tick.h"
+
+TIM_HandleTypeDef TimMasterHandle;
+uint32_t PreviousVal = 0;
+
+void us_ticker_irq_handler(void);
+
+void timer_irq_handler(void) {
+ // Channel 1 for mbed timeout
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
+ if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC1) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+ us_ticker_irq_handler();
+ }
+ }
+
+ // Channel 2 for HAL tick
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC2) == SET) {
+ if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC2) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
+ uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
+ if ((val - PreviousVal) >= HAL_TICK_DELAY) {
+ // Increment HAL variable
+ HAL_IncTick();
+ // Prepare next interrupt
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
+ PreviousVal = val;
+#if 0 // For DEBUG only
+ HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
+#endif
+ }
+ }
+ }
+}
+
+// Reconfigure the HAL tick using a standard timer instead of systick.
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
+ // Enable timer clock
+ TIM_MST_RCC;
+
+ // Reset timer
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+
+ // Update the SystemCoreClock variable
+ SystemCoreClockUpdate();
+
+ // Configure time base
+ TimMasterHandle.Instance = TIM_MST;
+ TimMasterHandle.Init.Period = 0xFFFFFFFF;
+ TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
+ TimMasterHandle.Init.ClockDivision = 0;
+ TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ TimMasterHandle.Init.RepetitionCounter = 0;
+ HAL_TIM_OC_Init(&TimMasterHandle);
+
+ NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
+ NVIC_EnableIRQ(TIM_MST_IRQ);
+
+ // Channel 1 for mbed timeout
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
+
+ // Channel 2 for HAL tick
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
+ PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+#if 0 // For DEBUG only
+ __GPIOB_CLK_ENABLE();
+ GPIO_InitTypeDef GPIO_InitStruct;
+ GPIO_InitStruct.Pin = GPIO_PIN_6;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+#endif
+
+ return HAL_OK;
+}
+
+void HAL_SuspendTick(void)
+{
+ TimMasterHandle.Instance = TIM_MST;
+
+ // Disable HAL tick and us_ticker update interrupts (used for 32 bit counter)
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+}
+
+void HAL_ResumeTick(void)
+{
+ TimMasterHandle.Instance = TIM_MST;
+
+ // Enable HAL tick and us_ticker update interrupts (used for 32 bit counter)
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f4xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM5
+#define TIM_MST_IRQ TIM5_IRQn
+#define TIM_MST_RCC __TIM5_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f401xc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f401xc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,4807 @@
+/**
+ ******************************************************************************
+ * @file stm32f401xc.h
+ * @author MCD Application Team
+ * @version V2.5.0
+ * @date 22-April-2016
+ * @brief CMSIS STM32F401xCxx Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - peripherals registers declarations and bits definition
+ * - Macros to access peripheral's registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f401xc
+ * @{
+ */
+
+#ifndef __STM32F401xC_H
+#define __STM32F401xC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+#ifndef __FPU_PRESENT
+#define __FPU_PRESENT 1U /*!< FPU present */
+#endif /* __FPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ SPI4_IRQn = 84 /*!< SPI4 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+ uint32_t RESERVED7[1]; /*!< Reserved, 0x88 */
+ __IO uint32_t DCKCFGR; /*!< RCC DCKCFGR configuration register, Address offset: 0x8C */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /* !< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE 0x08000000U /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE 0x20000000U /*!< SRAM1(64 KB) base address in the alias region */
+#define PERIPH_BASE 0x40000000U /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE 0x40024000U /*!< Backup SRAM(4 KB) base address in the alias region */
+#define SRAM1_BB_BASE 0x22000000U /*!< SRAM1(64 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE 0x42000000U /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE 0x42480000U /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END 0x0803FFFFU /*!< FLASH end address */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000U)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000U)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000U)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000U)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400U)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800U)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00U)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800U)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00U)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000U)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400U)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800U)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00U)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000U)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400U)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400U)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800U)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00U)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000U)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000U)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000U)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400U)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000U)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300U)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00U)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000U)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400U)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800U)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00U)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000U)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400U)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800U)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000U)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400U)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800U)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00U)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000U)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00U)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000U)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800U)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00U)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000U)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010U)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028U)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040U)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058U)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070U)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088U)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0U)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8U)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400U)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010U)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028U)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040U)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058U)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070U)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088U)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0U)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8U)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE 0xE0042000U
+
+/*!< USB registers base address */
+#define USB_OTG_FS_PERIPH_BASE 0x50000000U
+
+#define USB_OTG_GLOBAL_BASE 0x000U
+#define USB_OTG_DEVICE_BASE 0x800U
+#define USB_OTG_IN_ENDPOINT_BASE 0x900U
+#define USB_OTG_OUT_ENDPOINT_BASE 0xB00U
+#define USB_OTG_EP_REG_SIZE 0x20U
+#define USB_OTG_HOST_BASE 0x400U
+#define USB_OTG_HOST_PORT_BASE 0x440U
+#define USB_OTG_HOST_CHANNEL_BASE 0x500U
+#define USB_OTG_HOST_CHANNEL_SIZE 0x20U
+#define USB_OTG_PCGCCTL_BASE 0xE00U
+#define USB_OTG_FIFO_BASE 0x1000U
+#define USB_OTG_FIFO_SIZE 0x1000U
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD 0x00000001U /*!<Analog watchdog flag */
+#define ADC_SR_EOC 0x00000002U /*!<End of conversion */
+#define ADC_SR_JEOC 0x00000004U /*!<Injected channel end of conversion */
+#define ADC_SR_JSTRT 0x00000008U /*!<Injected channel Start flag */
+#define ADC_SR_STRT 0x00000010U /*!<Regular channel Start flag */
+#define ADC_SR_OVR 0x00000020U /*!<Overrun flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH 0x0000001FU /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 0x00000001U /*!<Bit 0 */
+#define ADC_CR1_AWDCH_1 0x00000002U /*!<Bit 1 */
+#define ADC_CR1_AWDCH_2 0x00000004U /*!<Bit 2 */
+#define ADC_CR1_AWDCH_3 0x00000008U /*!<Bit 3 */
+#define ADC_CR1_AWDCH_4 0x00000010U /*!<Bit 4 */
+#define ADC_CR1_EOCIE 0x00000020U /*!<Interrupt enable for EOC */
+#define ADC_CR1_AWDIE 0x00000040U /*!<AAnalog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE 0x00000080U /*!<Interrupt enable for injected channels */
+#define ADC_CR1_SCAN 0x00000100U /*!<Scan mode */
+#define ADC_CR1_AWDSGL 0x00000200U /*!<Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO 0x00000400U /*!<Automatic injected group conversion */
+#define ADC_CR1_DISCEN 0x00000800U /*!<Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN 0x00001000U /*!<Discontinuous mode on injected channels */
+#define ADC_CR1_DISCNUM 0x0000E000U /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 0x00002000U /*!<Bit 0 */
+#define ADC_CR1_DISCNUM_1 0x00004000U /*!<Bit 1 */
+#define ADC_CR1_DISCNUM_2 0x00008000U /*!<Bit 2 */
+#define ADC_CR1_JAWDEN 0x00400000U /*!<Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN 0x00800000U /*!<Analog watchdog enable on regular channels */
+#define ADC_CR1_RES 0x03000000U /*!<RES[2:0] bits (Resolution) */
+#define ADC_CR1_RES_0 0x01000000U /*!<Bit 0 */
+#define ADC_CR1_RES_1 0x02000000U /*!<Bit 1 */
+#define ADC_CR1_OVRIE 0x04000000U /*!<overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON 0x00000001U /*!<A/D Converter ON / OFF */
+#define ADC_CR2_CONT 0x00000002U /*!<Continuous Conversion */
+#define ADC_CR2_DMA 0x00000100U /*!<Direct Memory access mode */
+#define ADC_CR2_DDS 0x00000200U /*!<DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS 0x00000400U /*!<End of conversion selection */
+#define ADC_CR2_ALIGN 0x00000800U /*!<Data Alignment */
+#define ADC_CR2_JEXTSEL 0x000F0000U /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 0x00010000U /*!<Bit 0 */
+#define ADC_CR2_JEXTSEL_1 0x00020000U /*!<Bit 1 */
+#define ADC_CR2_JEXTSEL_2 0x00040000U /*!<Bit 2 */
+#define ADC_CR2_JEXTSEL_3 0x00080000U /*!<Bit 3 */
+#define ADC_CR2_JEXTEN 0x00300000U /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define ADC_CR2_JEXTEN_0 0x00100000U /*!<Bit 0 */
+#define ADC_CR2_JEXTEN_1 0x00200000U /*!<Bit 1 */
+#define ADC_CR2_JSWSTART 0x00400000U /*!<Start Conversion of injected channels */
+#define ADC_CR2_EXTSEL 0x0F000000U /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 0x01000000U /*!<Bit 0 */
+#define ADC_CR2_EXTSEL_1 0x02000000U /*!<Bit 1 */
+#define ADC_CR2_EXTSEL_2 0x04000000U /*!<Bit 2 */
+#define ADC_CR2_EXTSEL_3 0x08000000U /*!<Bit 3 */
+#define ADC_CR2_EXTEN 0x30000000U /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define ADC_CR2_EXTEN_0 0x10000000U /*!<Bit 0 */
+#define ADC_CR2_EXTEN_1 0x20000000U /*!<Bit 1 */
+#define ADC_CR2_SWSTART 0x40000000U /*!<Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 0x00000007U /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 0x00000001U /*!<Bit 0 */
+#define ADC_SMPR1_SMP10_1 0x00000002U /*!<Bit 1 */
+#define ADC_SMPR1_SMP10_2 0x00000004U /*!<Bit 2 */
+#define ADC_SMPR1_SMP11 0x00000038U /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 0x00000008U /*!<Bit 0 */
+#define ADC_SMPR1_SMP11_1 0x00000010U /*!<Bit 1 */
+#define ADC_SMPR1_SMP11_2 0x00000020U /*!<Bit 2 */
+#define ADC_SMPR1_SMP12 0x000001C0U /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 0x00000040U /*!<Bit 0 */
+#define ADC_SMPR1_SMP12_1 0x00000080U /*!<Bit 1 */
+#define ADC_SMPR1_SMP12_2 0x00000100U /*!<Bit 2 */
+#define ADC_SMPR1_SMP13 0x00000E00U /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 0x00000200U /*!<Bit 0 */
+#define ADC_SMPR1_SMP13_1 0x00000400U /*!<Bit 1 */
+#define ADC_SMPR1_SMP13_2 0x00000800U /*!<Bit 2 */
+#define ADC_SMPR1_SMP14 0x00007000U /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 0x00001000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP14_1 0x00002000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP14_2 0x00004000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP15 0x00038000U /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 0x00008000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP15_1 0x00010000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP15_2 0x00020000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP16 0x001C0000U /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 0x00040000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP16_1 0x00080000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP16_2 0x00100000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP17 0x00E00000U /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 0x00200000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP17_1 0x00400000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP17_2 0x00800000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP18 0x07000000U /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR1_SMP18_0 0x01000000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP18_1 0x02000000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP18_2 0x04000000U /*!<Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 0x00000007U /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 0x00000001U /*!<Bit 0 */
+#define ADC_SMPR2_SMP0_1 0x00000002U /*!<Bit 1 */
+#define ADC_SMPR2_SMP0_2 0x00000004U /*!<Bit 2 */
+#define ADC_SMPR2_SMP1 0x00000038U /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 0x00000008U /*!<Bit 0 */
+#define ADC_SMPR2_SMP1_1 0x00000010U /*!<Bit 1 */
+#define ADC_SMPR2_SMP1_2 0x00000020U /*!<Bit 2 */
+#define ADC_SMPR2_SMP2 0x000001C0U /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 0x00000040U /*!<Bit 0 */
+#define ADC_SMPR2_SMP2_1 0x00000080U /*!<Bit 1 */
+#define ADC_SMPR2_SMP2_2 0x00000100U /*!<Bit 2 */
+#define ADC_SMPR2_SMP3 0x00000E00U /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 0x00000200U /*!<Bit 0 */
+#define ADC_SMPR2_SMP3_1 0x00000400U /*!<Bit 1 */
+#define ADC_SMPR2_SMP3_2 0x00000800U /*!<Bit 2 */
+#define ADC_SMPR2_SMP4 0x00007000U /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 0x00001000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP4_1 0x00002000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP4_2 0x00004000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP5 0x00038000U /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 0x00008000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP5_1 0x00010000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP5_2 0x00020000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP6 0x001C0000U /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 0x00040000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP6_1 0x00080000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP6_2 0x00100000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP7 0x00E00000U /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 0x00200000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP7_1 0x00400000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP7_2 0x00800000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP8 0x07000000U /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 0x01000000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP8_1 0x02000000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP8_2 0x04000000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP9 0x38000000U /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 0x08000000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP9_1 0x10000000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP9_2 0x20000000U /*!<Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 0x0FFFU /*!<Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 0x0FFFU /*!<Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 0x0FFFU /*!<Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 0x0FFFU /*!<Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT 0x0FFFU /*!<Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT 0x0FFFU /*!<Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 0x0000001FU /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 0x00000001U /*!<Bit 0 */
+#define ADC_SQR1_SQ13_1 0x00000002U /*!<Bit 1 */
+#define ADC_SQR1_SQ13_2 0x00000004U /*!<Bit 2 */
+#define ADC_SQR1_SQ13_3 0x00000008U /*!<Bit 3 */
+#define ADC_SQR1_SQ13_4 0x00000010U /*!<Bit 4 */
+#define ADC_SQR1_SQ14 0x000003E0U /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 0x00000020U /*!<Bit 0 */
+#define ADC_SQR1_SQ14_1 0x00000040U /*!<Bit 1 */
+#define ADC_SQR1_SQ14_2 0x00000080U /*!<Bit 2 */
+#define ADC_SQR1_SQ14_3 0x00000100U /*!<Bit 3 */
+#define ADC_SQR1_SQ14_4 0x00000200U /*!<Bit 4 */
+#define ADC_SQR1_SQ15 0x00007C00U /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 0x00000400U /*!<Bit 0 */
+#define ADC_SQR1_SQ15_1 0x00000800U /*!<Bit 1 */
+#define ADC_SQR1_SQ15_2 0x00001000U /*!<Bit 2 */
+#define ADC_SQR1_SQ15_3 0x00002000U /*!<Bit 3 */
+#define ADC_SQR1_SQ15_4 0x00004000U /*!<Bit 4 */
+#define ADC_SQR1_SQ16 0x000F8000U /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 0x00008000U /*!<Bit 0 */
+#define ADC_SQR1_SQ16_1 0x00010000U /*!<Bit 1 */
+#define ADC_SQR1_SQ16_2 0x00020000U /*!<Bit 2 */
+#define ADC_SQR1_SQ16_3 0x00040000U /*!<Bit 3 */
+#define ADC_SQR1_SQ16_4 0x00080000U /*!<Bit 4 */
+#define ADC_SQR1_L 0x00F00000U /*!<L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 0x00100000U /*!<Bit 0 */
+#define ADC_SQR1_L_1 0x00200000U /*!<Bit 1 */
+#define ADC_SQR1_L_2 0x00400000U /*!<Bit 2 */
+#define ADC_SQR1_L_3 0x00800000U /*!<Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 0x0000001FU /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 0x00000001U /*!<Bit 0 */
+#define ADC_SQR2_SQ7_1 0x00000002U /*!<Bit 1 */
+#define ADC_SQR2_SQ7_2 0x00000004U /*!<Bit 2 */
+#define ADC_SQR2_SQ7_3 0x00000008U /*!<Bit 3 */
+#define ADC_SQR2_SQ7_4 0x00000010U /*!<Bit 4 */
+#define ADC_SQR2_SQ8 0x000003E0U /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 0x00000020U /*!<Bit 0 */
+#define ADC_SQR2_SQ8_1 0x00000040U /*!<Bit 1 */
+#define ADC_SQR2_SQ8_2 0x00000080U /*!<Bit 2 */
+#define ADC_SQR2_SQ8_3 0x00000100U /*!<Bit 3 */
+#define ADC_SQR2_SQ8_4 0x00000200U /*!<Bit 4 */
+#define ADC_SQR2_SQ9 0x00007C00U /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 0x00000400U /*!<Bit 0 */
+#define ADC_SQR2_SQ9_1 0x00000800U /*!<Bit 1 */
+#define ADC_SQR2_SQ9_2 0x00001000U /*!<Bit 2 */
+#define ADC_SQR2_SQ9_3 0x00002000U /*!<Bit 3 */
+#define ADC_SQR2_SQ9_4 0x00004000U /*!<Bit 4 */
+#define ADC_SQR2_SQ10 0x000F8000U /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 0x00008000U /*!<Bit 0 */
+#define ADC_SQR2_SQ10_1 0x00010000U /*!<Bit 1 */
+#define ADC_SQR2_SQ10_2 0x00020000U /*!<Bit 2 */
+#define ADC_SQR2_SQ10_3 0x00040000U /*!<Bit 3 */
+#define ADC_SQR2_SQ10_4 0x00080000U /*!<Bit 4 */
+#define ADC_SQR2_SQ11 0x01F00000U /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 0x00100000U /*!<Bit 0 */
+#define ADC_SQR2_SQ11_1 0x00200000U /*!<Bit 1 */
+#define ADC_SQR2_SQ11_2 0x00400000U /*!<Bit 2 */
+#define ADC_SQR2_SQ11_3 0x00800000U /*!<Bit 3 */
+#define ADC_SQR2_SQ11_4 0x01000000U /*!<Bit 4 */
+#define ADC_SQR2_SQ12 0x3E000000U /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 0x02000000U /*!<Bit 0 */
+#define ADC_SQR2_SQ12_1 0x04000000U /*!<Bit 1 */
+#define ADC_SQR2_SQ12_2 0x08000000U /*!<Bit 2 */
+#define ADC_SQR2_SQ12_3 0x10000000U /*!<Bit 3 */
+#define ADC_SQR2_SQ12_4 0x20000000U /*!<Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 0x0000001FU /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 0x00000001U /*!<Bit 0 */
+#define ADC_SQR3_SQ1_1 0x00000002U /*!<Bit 1 */
+#define ADC_SQR3_SQ1_2 0x00000004U /*!<Bit 2 */
+#define ADC_SQR3_SQ1_3 0x00000008U /*!<Bit 3 */
+#define ADC_SQR3_SQ1_4 0x00000010U /*!<Bit 4 */
+#define ADC_SQR3_SQ2 0x000003E0U /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 0x00000020U /*!<Bit 0 */
+#define ADC_SQR3_SQ2_1 0x00000040U /*!<Bit 1 */
+#define ADC_SQR3_SQ2_2 0x00000080U /*!<Bit 2 */
+#define ADC_SQR3_SQ2_3 0x00000100U /*!<Bit 3 */
+#define ADC_SQR3_SQ2_4 0x00000200U /*!<Bit 4 */
+#define ADC_SQR3_SQ3 0x00007C00U /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 0x00000400U /*!<Bit 0 */
+#define ADC_SQR3_SQ3_1 0x00000800U /*!<Bit 1 */
+#define ADC_SQR3_SQ3_2 0x00001000U /*!<Bit 2 */
+#define ADC_SQR3_SQ3_3 0x00002000U /*!<Bit 3 */
+#define ADC_SQR3_SQ3_4 0x00004000U /*!<Bit 4 */
+#define ADC_SQR3_SQ4 0x000F8000U /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 0x00008000U /*!<Bit 0 */
+#define ADC_SQR3_SQ4_1 0x00010000U /*!<Bit 1 */
+#define ADC_SQR3_SQ4_2 0x00020000U /*!<Bit 2 */
+#define ADC_SQR3_SQ4_3 0x00040000U /*!<Bit 3 */
+#define ADC_SQR3_SQ4_4 0x00080000U /*!<Bit 4 */
+#define ADC_SQR3_SQ5 0x01F00000U /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 0x00100000U /*!<Bit 0 */
+#define ADC_SQR3_SQ5_1 0x00200000U /*!<Bit 1 */
+#define ADC_SQR3_SQ5_2 0x00400000U /*!<Bit 2 */
+#define ADC_SQR3_SQ5_3 0x00800000U /*!<Bit 3 */
+#define ADC_SQR3_SQ5_4 0x01000000U /*!<Bit 4 */
+#define ADC_SQR3_SQ6 0x3E000000U /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 0x02000000U /*!<Bit 0 */
+#define ADC_SQR3_SQ6_1 0x04000000U /*!<Bit 1 */
+#define ADC_SQR3_SQ6_2 0x08000000U /*!<Bit 2 */
+#define ADC_SQR3_SQ6_3 0x10000000U /*!<Bit 3 */
+#define ADC_SQR3_SQ6_4 0x20000000U /*!<Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 0x0000001FU /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 0x00000001U /*!<Bit 0 */
+#define ADC_JSQR_JSQ1_1 0x00000002U /*!<Bit 1 */
+#define ADC_JSQR_JSQ1_2 0x00000004U /*!<Bit 2 */
+#define ADC_JSQR_JSQ1_3 0x00000008U /*!<Bit 3 */
+#define ADC_JSQR_JSQ1_4 0x00000010U /*!<Bit 4 */
+#define ADC_JSQR_JSQ2 0x000003E0U /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 0x00000020U /*!<Bit 0 */
+#define ADC_JSQR_JSQ2_1 0x00000040U /*!<Bit 1 */
+#define ADC_JSQR_JSQ2_2 0x00000080U /*!<Bit 2 */
+#define ADC_JSQR_JSQ2_3 0x00000100U /*!<Bit 3 */
+#define ADC_JSQR_JSQ2_4 0x00000200U /*!<Bit 4 */
+#define ADC_JSQR_JSQ3 0x00007C00U /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 0x00000400U /*!<Bit 0 */
+#define ADC_JSQR_JSQ3_1 0x00000800U /*!<Bit 1 */
+#define ADC_JSQR_JSQ3_2 0x00001000U /*!<Bit 2 */
+#define ADC_JSQR_JSQ3_3 0x00002000U /*!<Bit 3 */
+#define ADC_JSQR_JSQ3_4 0x00004000U /*!<Bit 4 */
+#define ADC_JSQR_JSQ4 0x000F8000U /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 0x00008000U /*!<Bit 0 */
+#define ADC_JSQR_JSQ4_1 0x00010000U /*!<Bit 1 */
+#define ADC_JSQR_JSQ4_2 0x00020000U /*!<Bit 2 */
+#define ADC_JSQR_JSQ4_3 0x00040000U /*!<Bit 3 */
+#define ADC_JSQR_JSQ4_4 0x00080000U /*!<Bit 4 */
+#define ADC_JSQR_JL 0x00300000U /*!<JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 0x00100000U /*!<Bit 0 */
+#define ADC_JSQR_JL_1 0x00200000U /*!<Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA 0xFFFFU /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA 0xFFFFU /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA 0xFFFFU /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA 0xFFFFU /*!<Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA 0x0000FFFFU /*!<Regular data */
+#define ADC_DR_ADC2DATA 0xFFFF0000U /*!<ADC2 data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 0x00000001U /*!<ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 0x00000002U /*!<ADC1 End of conversion */
+#define ADC_CSR_JEOC1 0x00000004U /*!<ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 0x00000008U /*!<ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 0x00000010U /*!<ADC1 Regular channel Start flag */
+#define ADC_CSR_OVR1 0x00000020U /*!<ADC1 DMA overrun flag */
+#define ADC_CSR_AWD2 0x00000100U /*!<ADC2 Analog watchdog flag */
+#define ADC_CSR_EOC2 0x00000200U /*!<ADC2 End of conversion */
+#define ADC_CSR_JEOC2 0x00000400U /*!<ADC2 Injected channel end of conversion */
+#define ADC_CSR_JSTRT2 0x00000800U /*!<ADC2 Injected channel Start flag */
+#define ADC_CSR_STRT2 0x00001000U /*!<ADC2 Regular channel Start flag */
+#define ADC_CSR_OVR2 0x00002000U /*!<ADC2 DMA overrun flag */
+#define ADC_CSR_AWD3 0x00010000U /*!<ADC3 Analog watchdog flag */
+#define ADC_CSR_EOC3 0x00020000U /*!<ADC3 End of conversion */
+#define ADC_CSR_JEOC3 0x00040000U /*!<ADC3 Injected channel end of conversion */
+#define ADC_CSR_JSTRT3 0x00080000U /*!<ADC3 Injected channel Start flag */
+#define ADC_CSR_STRT3 0x00100000U /*!<ADC3 Regular channel Start flag */
+#define ADC_CSR_OVR3 0x00200000U /*!<ADC3 DMA overrun flag */
+
+/* Legacy defines */
+#define ADC_CSR_DOVR1 ADC_CSR_OVR1
+#define ADC_CSR_DOVR2 ADC_CSR_OVR2
+#define ADC_CSR_DOVR3 ADC_CSR_OVR3
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_MULTI 0x0000001FU /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define ADC_CCR_MULTI_0 0x00000001U /*!<Bit 0 */
+#define ADC_CCR_MULTI_1 0x00000002U /*!<Bit 1 */
+#define ADC_CCR_MULTI_2 0x00000004U /*!<Bit 2 */
+#define ADC_CCR_MULTI_3 0x00000008U /*!<Bit 3 */
+#define ADC_CCR_MULTI_4 0x00000010U /*!<Bit 4 */
+#define ADC_CCR_DELAY 0x00000F00U /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define ADC_CCR_DELAY_0 0x00000100U /*!<Bit 0 */
+#define ADC_CCR_DELAY_1 0x00000200U /*!<Bit 1 */
+#define ADC_CCR_DELAY_2 0x00000400U /*!<Bit 2 */
+#define ADC_CCR_DELAY_3 0x00000800U /*!<Bit 3 */
+#define ADC_CCR_DDS 0x00002000U /*!<DMA disable selection (Multi-ADC mode) */
+#define ADC_CCR_DMA 0x0000C000U /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define ADC_CCR_DMA_0 0x00004000U /*!<Bit 0 */
+#define ADC_CCR_DMA_1 0x00008000U /*!<Bit 1 */
+#define ADC_CCR_ADCPRE 0x00030000U /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define ADC_CCR_ADCPRE_0 0x00010000U /*!<Bit 0 */
+#define ADC_CCR_ADCPRE_1 0x00020000U /*!<Bit 1 */
+#define ADC_CCR_VBATE 0x00400000U /*!<VBAT Enable */
+#define ADC_CCR_TSVREFE 0x00800000U /*!<Temperature Sensor and VREFINT Enable */
+
+/******************* Bit definition for ADC_CDR register ********************/
+#define ADC_CDR_DATA1 0x0000FFFFU /*!<1st data of a pair of regular conversions */
+#define ADC_CDR_DATA2 0xFFFF0000U /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR 0xFFFFFFFFU /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR 0xFFU /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET 0x01U /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DMA_SxCR register *****************/
+#define DMA_SxCR_CHSEL 0x0E000000U
+#define DMA_SxCR_CHSEL_0 0x02000000U
+#define DMA_SxCR_CHSEL_1 0x04000000U
+#define DMA_SxCR_CHSEL_2 0x08000000U
+#define DMA_SxCR_MBURST 0x01800000U
+#define DMA_SxCR_MBURST_0 0x00800000U
+#define DMA_SxCR_MBURST_1 0x01000000U
+#define DMA_SxCR_PBURST 0x00600000U
+#define DMA_SxCR_PBURST_0 0x00200000U
+#define DMA_SxCR_PBURST_1 0x00400000U
+#define DMA_SxCR_CT 0x00080000U
+#define DMA_SxCR_DBM 0x00040000U
+#define DMA_SxCR_PL 0x00030000U
+#define DMA_SxCR_PL_0 0x00010000U
+#define DMA_SxCR_PL_1 0x00020000U
+#define DMA_SxCR_PINCOS 0x00008000U
+#define DMA_SxCR_MSIZE 0x00006000U
+#define DMA_SxCR_MSIZE_0 0x00002000U
+#define DMA_SxCR_MSIZE_1 0x00004000U
+#define DMA_SxCR_PSIZE 0x00001800U
+#define DMA_SxCR_PSIZE_0 0x00000800U
+#define DMA_SxCR_PSIZE_1 0x00001000U
+#define DMA_SxCR_MINC 0x00000400U
+#define DMA_SxCR_PINC 0x00000200U
+#define DMA_SxCR_CIRC 0x00000100U
+#define DMA_SxCR_DIR 0x000000C0U
+#define DMA_SxCR_DIR_0 0x00000040U
+#define DMA_SxCR_DIR_1 0x00000080U
+#define DMA_SxCR_PFCTRL 0x00000020U
+#define DMA_SxCR_TCIE 0x00000010U
+#define DMA_SxCR_HTIE 0x00000008U
+#define DMA_SxCR_TEIE 0x00000004U
+#define DMA_SxCR_DMEIE 0x00000002U
+#define DMA_SxCR_EN 0x00000001U
+
+/* Legacy defines */
+#define DMA_SxCR_ACK 0x00100000U
+
+/******************** Bits definition for DMA_SxCNDTR register **************/
+#define DMA_SxNDT 0x0000FFFFU
+#define DMA_SxNDT_0 0x00000001U
+#define DMA_SxNDT_1 0x00000002U
+#define DMA_SxNDT_2 0x00000004U
+#define DMA_SxNDT_3 0x00000008U
+#define DMA_SxNDT_4 0x00000010U
+#define DMA_SxNDT_5 0x00000020U
+#define DMA_SxNDT_6 0x00000040U
+#define DMA_SxNDT_7 0x00000080U
+#define DMA_SxNDT_8 0x00000100U
+#define DMA_SxNDT_9 0x00000200U
+#define DMA_SxNDT_10 0x00000400U
+#define DMA_SxNDT_11 0x00000800U
+#define DMA_SxNDT_12 0x00001000U
+#define DMA_SxNDT_13 0x00002000U
+#define DMA_SxNDT_14 0x00004000U
+#define DMA_SxNDT_15 0x00008000U
+
+/******************** Bits definition for DMA_SxFCR register ****************/
+#define DMA_SxFCR_FEIE 0x00000080U
+#define DMA_SxFCR_FS 0x00000038U
+#define DMA_SxFCR_FS_0 0x00000008U
+#define DMA_SxFCR_FS_1 0x00000010U
+#define DMA_SxFCR_FS_2 0x00000020U
+#define DMA_SxFCR_DMDIS 0x00000004U
+#define DMA_SxFCR_FTH 0x00000003U
+#define DMA_SxFCR_FTH_0 0x00000001U
+#define DMA_SxFCR_FTH_1 0x00000002U
+
+/******************** Bits definition for DMA_LISR register *****************/
+#define DMA_LISR_TCIF3 0x08000000U
+#define DMA_LISR_HTIF3 0x04000000U
+#define DMA_LISR_TEIF3 0x02000000U
+#define DMA_LISR_DMEIF3 0x01000000U
+#define DMA_LISR_FEIF3 0x00400000U
+#define DMA_LISR_TCIF2 0x00200000U
+#define DMA_LISR_HTIF2 0x00100000U
+#define DMA_LISR_TEIF2 0x00080000U
+#define DMA_LISR_DMEIF2 0x00040000U
+#define DMA_LISR_FEIF2 0x00010000U
+#define DMA_LISR_TCIF1 0x00000800U
+#define DMA_LISR_HTIF1 0x00000400U
+#define DMA_LISR_TEIF1 0x00000200U
+#define DMA_LISR_DMEIF1 0x00000100U
+#define DMA_LISR_FEIF1 0x00000040U
+#define DMA_LISR_TCIF0 0x00000020U
+#define DMA_LISR_HTIF0 0x00000010U
+#define DMA_LISR_TEIF0 0x00000008U
+#define DMA_LISR_DMEIF0 0x00000004U
+#define DMA_LISR_FEIF0 0x00000001U
+
+/******************** Bits definition for DMA_HISR register *****************/
+#define DMA_HISR_TCIF7 0x08000000U
+#define DMA_HISR_HTIF7 0x04000000U
+#define DMA_HISR_TEIF7 0x02000000U
+#define DMA_HISR_DMEIF7 0x01000000U
+#define DMA_HISR_FEIF7 0x00400000U
+#define DMA_HISR_TCIF6 0x00200000U
+#define DMA_HISR_HTIF6 0x00100000U
+#define DMA_HISR_TEIF6 0x00080000U
+#define DMA_HISR_DMEIF6 0x00040000U
+#define DMA_HISR_FEIF6 0x00010000U
+#define DMA_HISR_TCIF5 0x00000800U
+#define DMA_HISR_HTIF5 0x00000400U
+#define DMA_HISR_TEIF5 0x00000200U
+#define DMA_HISR_DMEIF5 0x00000100U
+#define DMA_HISR_FEIF5 0x00000040U
+#define DMA_HISR_TCIF4 0x00000020U
+#define DMA_HISR_HTIF4 0x00000010U
+#define DMA_HISR_TEIF4 0x00000008U
+#define DMA_HISR_DMEIF4 0x00000004U
+#define DMA_HISR_FEIF4 0x00000001U
+
+/******************** Bits definition for DMA_LIFCR register ****************/
+#define DMA_LIFCR_CTCIF3 0x08000000U
+#define DMA_LIFCR_CHTIF3 0x04000000U
+#define DMA_LIFCR_CTEIF3 0x02000000U
+#define DMA_LIFCR_CDMEIF3 0x01000000U
+#define DMA_LIFCR_CFEIF3 0x00400000U
+#define DMA_LIFCR_CTCIF2 0x00200000U
+#define DMA_LIFCR_CHTIF2 0x00100000U
+#define DMA_LIFCR_CTEIF2 0x00080000U
+#define DMA_LIFCR_CDMEIF2 0x00040000U
+#define DMA_LIFCR_CFEIF2 0x00010000U
+#define DMA_LIFCR_CTCIF1 0x00000800U
+#define DMA_LIFCR_CHTIF1 0x00000400U
+#define DMA_LIFCR_CTEIF1 0x00000200U
+#define DMA_LIFCR_CDMEIF1 0x00000100U
+#define DMA_LIFCR_CFEIF1 0x00000040U
+#define DMA_LIFCR_CTCIF0 0x00000020U
+#define DMA_LIFCR_CHTIF0 0x00000010U
+#define DMA_LIFCR_CTEIF0 0x00000008U
+#define DMA_LIFCR_CDMEIF0 0x00000004U
+#define DMA_LIFCR_CFEIF0 0x00000001U
+
+/******************** Bits definition for DMA_HIFCR register ****************/
+#define DMA_HIFCR_CTCIF7 0x08000000U
+#define DMA_HIFCR_CHTIF7 0x04000000U
+#define DMA_HIFCR_CTEIF7 0x02000000U
+#define DMA_HIFCR_CDMEIF7 0x01000000U
+#define DMA_HIFCR_CFEIF7 0x00400000U
+#define DMA_HIFCR_CTCIF6 0x00200000U
+#define DMA_HIFCR_CHTIF6 0x00100000U
+#define DMA_HIFCR_CTEIF6 0x00080000U
+#define DMA_HIFCR_CDMEIF6 0x00040000U
+#define DMA_HIFCR_CFEIF6 0x00010000U
+#define DMA_HIFCR_CTCIF5 0x00000800U
+#define DMA_HIFCR_CHTIF5 0x00000400U
+#define DMA_HIFCR_CTEIF5 0x00000200U
+#define DMA_HIFCR_CDMEIF5 0x00000100U
+#define DMA_HIFCR_CFEIF5 0x00000040U
+#define DMA_HIFCR_CTCIF4 0x00000020U
+#define DMA_HIFCR_CHTIF4 0x00000010U
+#define DMA_HIFCR_CTEIF4 0x00000008U
+#define DMA_HIFCR_CDMEIF4 0x00000004U
+#define DMA_HIFCR_CFEIF4 0x00000001U
+
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 0x00000001U /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 0x00000002U /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 0x00000004U /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 0x00000008U /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 0x00000010U /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 0x00000020U /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 0x00000040U /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 0x00000080U /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 0x00000100U /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 0x00000200U /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 0x00000400U /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 0x00000800U /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 0x00001000U /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 0x00002000U /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 0x00004000U /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 0x00008000U /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 0x00010000U /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 0x00020000U /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 0x00040000U /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 0x00080000U /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 0x00100000U /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 0x00200000U /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 0x00400000U /*!< Interrupt Mask on line 22 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 0x00000001U /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 0x00000002U /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 0x00000004U /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 0x00000008U /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 0x00000010U /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 0x00000020U /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 0x00000040U /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 0x00000080U /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 0x00000100U /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 0x00000200U /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 0x00000400U /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 0x00000800U /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 0x00001000U /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 0x00002000U /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 0x00004000U /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 0x00008000U /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 0x00010000U /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 0x00020000U /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 0x00040000U /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 0x00080000U /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 0x00100000U /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 0x00200000U /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 0x00400000U /*!< Event Mask on line 22 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 0x00000001U /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 0x00000002U /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 0x00000004U /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 0x00000008U /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 0x00000010U /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 0x00000020U /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 0x00000040U /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 0x00000080U /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 0x00000100U /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 0x00000200U /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 0x00000400U /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 0x00000800U /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 0x00001000U /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 0x00002000U /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 0x00004000U /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 0x00008000U /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 0x00010000U /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 0x00020000U /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 0x00040000U /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 0x00080000U /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 0x00100000U /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 0x00200000U /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 0x00400000U /*!< Rising trigger event configuration bit of line 22 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 0x00000001U /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 0x00000002U /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 0x00000004U /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 0x00000008U /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 0x00000010U /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 0x00000020U /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 0x00000040U /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 0x00000080U /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 0x00000100U /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 0x00000200U /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 0x00000400U /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 0x00000800U /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 0x00001000U /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 0x00002000U /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 0x00004000U /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 0x00008000U /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 0x00010000U /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 0x00020000U /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 0x00040000U /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 0x00080000U /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 0x00100000U /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 0x00200000U /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 0x00400000U /*!< Falling trigger event configuration bit of line 22 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 0x00000001U /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 0x00000002U /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 0x00000004U /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 0x00000008U /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 0x00000010U /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 0x00000020U /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 0x00000040U /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 0x00000080U /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 0x00000100U /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 0x00000200U /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 0x00000400U /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 0x00000800U /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 0x00001000U /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 0x00002000U /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 0x00004000U /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 0x00008000U /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 0x00010000U /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 0x00020000U /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 0x00040000U /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 0x00080000U /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 0x00100000U /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 0x00200000U /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 0x00400000U /*!< Software Interrupt on line 22 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 0x00000001U /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 0x00000002U /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 0x00000004U /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 0x00000008U /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 0x00000010U /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 0x00000020U /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 0x00000040U /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 0x00000080U /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 0x00000100U /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 0x00000200U /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 0x00000400U /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 0x00000800U /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 0x00001000U /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 0x00002000U /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 0x00004000U /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 0x00008000U /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 0x00010000U /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 0x00020000U /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 0x00040000U /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 0x00080000U /*!< Pending bit for line 19 */
+#define EXTI_PR_PR20 0x00100000U /*!< Pending bit for line 20 */
+#define EXTI_PR_PR21 0x00200000U /*!< Pending bit for line 21 */
+#define EXTI_PR_PR22 0x00400000U /*!< Pending bit for line 22 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bits definition for FLASH_ACR register *****************/
+#define FLASH_ACR_LATENCY 0x0000000FU
+#define FLASH_ACR_LATENCY_0WS 0x00000000U
+#define FLASH_ACR_LATENCY_1WS 0x00000001U
+#define FLASH_ACR_LATENCY_2WS 0x00000002U
+#define FLASH_ACR_LATENCY_3WS 0x00000003U
+#define FLASH_ACR_LATENCY_4WS 0x00000004U
+#define FLASH_ACR_LATENCY_5WS 0x00000005U
+#define FLASH_ACR_LATENCY_6WS 0x00000006U
+#define FLASH_ACR_LATENCY_7WS 0x00000007U
+
+#define FLASH_ACR_PRFTEN 0x00000100U
+#define FLASH_ACR_ICEN 0x00000200U
+#define FLASH_ACR_DCEN 0x00000400U
+#define FLASH_ACR_ICRST 0x00000800U
+#define FLASH_ACR_DCRST 0x00001000U
+#define FLASH_ACR_BYTE0_ADDRESS 0x40023C00U
+#define FLASH_ACR_BYTE2_ADDRESS 0x40023C03U
+
+/******************* Bits definition for FLASH_SR register ******************/
+#define FLASH_SR_EOP 0x00000001U
+#define FLASH_SR_SOP 0x00000002U
+#define FLASH_SR_WRPERR 0x00000010U
+#define FLASH_SR_PGAERR 0x00000020U
+#define FLASH_SR_PGPERR 0x00000040U
+#define FLASH_SR_PGSERR 0x00000080U
+#define FLASH_SR_BSY 0x00010000U
+
+/******************* Bits definition for FLASH_CR register ******************/
+#define FLASH_CR_PG 0x00000001U
+#define FLASH_CR_SER 0x00000002U
+#define FLASH_CR_MER 0x00000004U
+#define FLASH_CR_SNB 0x000000F8U
+#define FLASH_CR_SNB_0 0x00000008U
+#define FLASH_CR_SNB_1 0x00000010U
+#define FLASH_CR_SNB_2 0x00000020U
+#define FLASH_CR_SNB_3 0x00000040U
+#define FLASH_CR_SNB_4 0x00000080U
+#define FLASH_CR_PSIZE 0x00000300U
+#define FLASH_CR_PSIZE_0 0x00000100U
+#define FLASH_CR_PSIZE_1 0x00000200U
+#define FLASH_CR_STRT 0x00010000U
+#define FLASH_CR_EOPIE 0x01000000U
+#define FLASH_CR_LOCK 0x80000000U
+
+/******************* Bits definition for FLASH_OPTCR register ***************/
+#define FLASH_OPTCR_OPTLOCK 0x00000001U
+#define FLASH_OPTCR_OPTSTRT 0x00000002U
+#define FLASH_OPTCR_BOR_LEV_0 0x00000004U
+#define FLASH_OPTCR_BOR_LEV_1 0x00000008U
+#define FLASH_OPTCR_BOR_LEV 0x0000000CU
+
+#define FLASH_OPTCR_WDG_SW 0x00000020U
+#define FLASH_OPTCR_nRST_STOP 0x00000040U
+#define FLASH_OPTCR_nRST_STDBY 0x00000080U
+#define FLASH_OPTCR_RDP 0x0000FF00U
+#define FLASH_OPTCR_RDP_0 0x00000100U
+#define FLASH_OPTCR_RDP_1 0x00000200U
+#define FLASH_OPTCR_RDP_2 0x00000400U
+#define FLASH_OPTCR_RDP_3 0x00000800U
+#define FLASH_OPTCR_RDP_4 0x00001000U
+#define FLASH_OPTCR_RDP_5 0x00002000U
+#define FLASH_OPTCR_RDP_6 0x00004000U
+#define FLASH_OPTCR_RDP_7 0x00008000U
+#define FLASH_OPTCR_nWRP 0x0FFF0000U
+#define FLASH_OPTCR_nWRP_0 0x00010000U
+#define FLASH_OPTCR_nWRP_1 0x00020000U
+#define FLASH_OPTCR_nWRP_2 0x00040000U
+#define FLASH_OPTCR_nWRP_3 0x00080000U
+#define FLASH_OPTCR_nWRP_4 0x00100000U
+#define FLASH_OPTCR_nWRP_5 0x00200000U
+#define FLASH_OPTCR_nWRP_6 0x00400000U
+#define FLASH_OPTCR_nWRP_7 0x00800000U
+#define FLASH_OPTCR_nWRP_8 0x01000000U
+#define FLASH_OPTCR_nWRP_9 0x02000000U
+#define FLASH_OPTCR_nWRP_10 0x04000000U
+#define FLASH_OPTCR_nWRP_11 0x08000000U
+
+/****************** Bits definition for FLASH_OPTCR1 register ***************/
+#define FLASH_OPTCR1_nWRP 0x0FFF0000U
+#define FLASH_OPTCR1_nWRP_0 0x00010000U
+#define FLASH_OPTCR1_nWRP_1 0x00020000U
+#define FLASH_OPTCR1_nWRP_2 0x00040000U
+#define FLASH_OPTCR1_nWRP_3 0x00080000U
+#define FLASH_OPTCR1_nWRP_4 0x00100000U
+#define FLASH_OPTCR1_nWRP_5 0x00200000U
+#define FLASH_OPTCR1_nWRP_6 0x00400000U
+#define FLASH_OPTCR1_nWRP_7 0x00800000U
+#define FLASH_OPTCR1_nWRP_8 0x01000000U
+#define FLASH_OPTCR1_nWRP_9 0x02000000U
+#define FLASH_OPTCR1_nWRP_10 0x04000000U
+#define FLASH_OPTCR1_nWRP_11 0x08000000U
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 0x00000003U
+#define GPIO_MODER_MODER0_0 0x00000001U
+#define GPIO_MODER_MODER0_1 0x00000002U
+
+#define GPIO_MODER_MODER1 0x0000000CU
+#define GPIO_MODER_MODER1_0 0x00000004U
+#define GPIO_MODER_MODER1_1 0x00000008U
+
+#define GPIO_MODER_MODER2 0x00000030U
+#define GPIO_MODER_MODER2_0 0x00000010U
+#define GPIO_MODER_MODER2_1 0x00000020U
+
+#define GPIO_MODER_MODER3 0x000000C0U
+#define GPIO_MODER_MODER3_0 0x00000040U
+#define GPIO_MODER_MODER3_1 0x00000080U
+
+#define GPIO_MODER_MODER4 0x00000300U
+#define GPIO_MODER_MODER4_0 0x00000100U
+#define GPIO_MODER_MODER4_1 0x00000200U
+
+#define GPIO_MODER_MODER5 0x00000C00U
+#define GPIO_MODER_MODER5_0 0x00000400U
+#define GPIO_MODER_MODER5_1 0x00000800U
+
+#define GPIO_MODER_MODER6 0x00003000U
+#define GPIO_MODER_MODER6_0 0x00001000U
+#define GPIO_MODER_MODER6_1 0x00002000U
+
+#define GPIO_MODER_MODER7 0x0000C000U
+#define GPIO_MODER_MODER7_0 0x00004000U
+#define GPIO_MODER_MODER7_1 0x00008000U
+
+#define GPIO_MODER_MODER8 0x00030000U
+#define GPIO_MODER_MODER8_0 0x00010000U
+#define GPIO_MODER_MODER8_1 0x00020000U
+
+#define GPIO_MODER_MODER9 0x000C0000U
+#define GPIO_MODER_MODER9_0 0x00040000U
+#define GPIO_MODER_MODER9_1 0x00080000U
+
+#define GPIO_MODER_MODER10 0x00300000U
+#define GPIO_MODER_MODER10_0 0x00100000U
+#define GPIO_MODER_MODER10_1 0x00200000U
+
+#define GPIO_MODER_MODER11 0x00C00000U
+#define GPIO_MODER_MODER11_0 0x00400000U
+#define GPIO_MODER_MODER11_1 0x00800000U
+
+#define GPIO_MODER_MODER12 0x03000000U
+#define GPIO_MODER_MODER12_0 0x01000000U
+#define GPIO_MODER_MODER12_1 0x02000000U
+
+#define GPIO_MODER_MODER13 0x0C000000U
+#define GPIO_MODER_MODER13_0 0x04000000U
+#define GPIO_MODER_MODER13_1 0x08000000U
+
+#define GPIO_MODER_MODER14 0x30000000U
+#define GPIO_MODER_MODER14_0 0x10000000U
+#define GPIO_MODER_MODER14_1 0x20000000U
+
+#define GPIO_MODER_MODER15 0xC0000000U
+#define GPIO_MODER_MODER15_0 0x40000000U
+#define GPIO_MODER_MODER15_1 0x80000000U
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 0x00000001U
+#define GPIO_OTYPER_OT_1 0x00000002U
+#define GPIO_OTYPER_OT_2 0x00000004U
+#define GPIO_OTYPER_OT_3 0x00000008U
+#define GPIO_OTYPER_OT_4 0x00000010U
+#define GPIO_OTYPER_OT_5 0x00000020U
+#define GPIO_OTYPER_OT_6 0x00000040U
+#define GPIO_OTYPER_OT_7 0x00000080U
+#define GPIO_OTYPER_OT_8 0x00000100U
+#define GPIO_OTYPER_OT_9 0x00000200U
+#define GPIO_OTYPER_OT_10 0x00000400U
+#define GPIO_OTYPER_OT_11 0x00000800U
+#define GPIO_OTYPER_OT_12 0x00001000U
+#define GPIO_OTYPER_OT_13 0x00002000U
+#define GPIO_OTYPER_OT_14 0x00004000U
+#define GPIO_OTYPER_OT_15 0x00008000U
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 0x00000003U
+#define GPIO_OSPEEDER_OSPEEDR0_0 0x00000001U
+#define GPIO_OSPEEDER_OSPEEDR0_1 0x00000002U
+
+#define GPIO_OSPEEDER_OSPEEDR1 0x0000000CU
+#define GPIO_OSPEEDER_OSPEEDR1_0 0x00000004U
+#define GPIO_OSPEEDER_OSPEEDR1_1 0x00000008U
+
+#define GPIO_OSPEEDER_OSPEEDR2 0x00000030U
+#define GPIO_OSPEEDER_OSPEEDR2_0 0x00000010U
+#define GPIO_OSPEEDER_OSPEEDR2_1 0x00000020U
+
+#define GPIO_OSPEEDER_OSPEEDR3 0x000000C0U
+#define GPIO_OSPEEDER_OSPEEDR3_0 0x00000040U
+#define GPIO_OSPEEDER_OSPEEDR3_1 0x00000080U
+
+#define GPIO_OSPEEDER_OSPEEDR4 0x00000300U
+#define GPIO_OSPEEDER_OSPEEDR4_0 0x00000100U
+#define GPIO_OSPEEDER_OSPEEDR4_1 0x00000200U
+
+#define GPIO_OSPEEDER_OSPEEDR5 0x00000C00U
+#define GPIO_OSPEEDER_OSPEEDR5_0 0x00000400U
+#define GPIO_OSPEEDER_OSPEEDR5_1 0x00000800U
+
+#define GPIO_OSPEEDER_OSPEEDR6 0x00003000U
+#define GPIO_OSPEEDER_OSPEEDR6_0 0x00001000U
+#define GPIO_OSPEEDER_OSPEEDR6_1 0x00002000U
+
+#define GPIO_OSPEEDER_OSPEEDR7 0x0000C000U
+#define GPIO_OSPEEDER_OSPEEDR7_0 0x00004000U
+#define GPIO_OSPEEDER_OSPEEDR7_1 0x00008000U
+
+#define GPIO_OSPEEDER_OSPEEDR8 0x00030000U
+#define GPIO_OSPEEDER_OSPEEDR8_0 0x00010000U
+#define GPIO_OSPEEDER_OSPEEDR8_1 0x00020000U
+
+#define GPIO_OSPEEDER_OSPEEDR9 0x000C0000U
+#define GPIO_OSPEEDER_OSPEEDR9_0 0x00040000U
+#define GPIO_OSPEEDER_OSPEEDR9_1 0x00080000U
+
+#define GPIO_OSPEEDER_OSPEEDR10 0x00300000U
+#define GPIO_OSPEEDER_OSPEEDR10_0 0x00100000U
+#define GPIO_OSPEEDER_OSPEEDR10_1 0x00200000U
+
+#define GPIO_OSPEEDER_OSPEEDR11 0x00C00000U
+#define GPIO_OSPEEDER_OSPEEDR11_0 0x00400000U
+#define GPIO_OSPEEDER_OSPEEDR11_1 0x00800000U
+
+#define GPIO_OSPEEDER_OSPEEDR12 0x03000000U
+#define GPIO_OSPEEDER_OSPEEDR12_0 0x01000000U
+#define GPIO_OSPEEDER_OSPEEDR12_1 0x02000000U
+
+#define GPIO_OSPEEDER_OSPEEDR13 0x0C000000U
+#define GPIO_OSPEEDER_OSPEEDR13_0 0x04000000U
+#define GPIO_OSPEEDER_OSPEEDR13_1 0x08000000U
+
+#define GPIO_OSPEEDER_OSPEEDR14 0x30000000U
+#define GPIO_OSPEEDER_OSPEEDR14_0 0x10000000U
+#define GPIO_OSPEEDER_OSPEEDR14_1 0x20000000U
+
+#define GPIO_OSPEEDER_OSPEEDR15 0xC0000000U
+#define GPIO_OSPEEDER_OSPEEDR15_0 0x40000000U
+#define GPIO_OSPEEDER_OSPEEDR15_1 0x80000000U
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 0x00000003U
+#define GPIO_PUPDR_PUPDR0_0 0x00000001U
+#define GPIO_PUPDR_PUPDR0_1 0x00000002U
+
+#define GPIO_PUPDR_PUPDR1 0x0000000CU
+#define GPIO_PUPDR_PUPDR1_0 0x00000004U
+#define GPIO_PUPDR_PUPDR1_1 0x00000008U
+
+#define GPIO_PUPDR_PUPDR2 0x00000030U
+#define GPIO_PUPDR_PUPDR2_0 0x00000010U
+#define GPIO_PUPDR_PUPDR2_1 0x00000020U
+
+#define GPIO_PUPDR_PUPDR3 0x000000C0U
+#define GPIO_PUPDR_PUPDR3_0 0x00000040U
+#define GPIO_PUPDR_PUPDR3_1 0x00000080U
+
+#define GPIO_PUPDR_PUPDR4 0x00000300U
+#define GPIO_PUPDR_PUPDR4_0 0x00000100U
+#define GPIO_PUPDR_PUPDR4_1 0x00000200U
+
+#define GPIO_PUPDR_PUPDR5 0x00000C00U
+#define GPIO_PUPDR_PUPDR5_0 0x00000400U
+#define GPIO_PUPDR_PUPDR5_1 0x00000800U
+
+#define GPIO_PUPDR_PUPDR6 0x00003000U
+#define GPIO_PUPDR_PUPDR6_0 0x00001000U
+#define GPIO_PUPDR_PUPDR6_1 0x00002000U
+
+#define GPIO_PUPDR_PUPDR7 0x0000C000U
+#define GPIO_PUPDR_PUPDR7_0 0x00004000U
+#define GPIO_PUPDR_PUPDR7_1 0x00008000U
+
+#define GPIO_PUPDR_PUPDR8 0x00030000U
+#define GPIO_PUPDR_PUPDR8_0 0x00010000U
+#define GPIO_PUPDR_PUPDR8_1 0x00020000U
+
+#define GPIO_PUPDR_PUPDR9 0x000C0000U
+#define GPIO_PUPDR_PUPDR9_0 0x00040000U
+#define GPIO_PUPDR_PUPDR9_1 0x00080000U
+
+#define GPIO_PUPDR_PUPDR10 0x00300000U
+#define GPIO_PUPDR_PUPDR10_0 0x00100000U
+#define GPIO_PUPDR_PUPDR10_1 0x00200000U
+
+#define GPIO_PUPDR_PUPDR11 0x00C00000U
+#define GPIO_PUPDR_PUPDR11_0 0x00400000U
+#define GPIO_PUPDR_PUPDR11_1 0x00800000U
+
+#define GPIO_PUPDR_PUPDR12 0x03000000U
+#define GPIO_PUPDR_PUPDR12_0 0x01000000U
+#define GPIO_PUPDR_PUPDR12_1 0x02000000U
+
+#define GPIO_PUPDR_PUPDR13 0x0C000000U
+#define GPIO_PUPDR_PUPDR13_0 0x04000000U
+#define GPIO_PUPDR_PUPDR13_1 0x08000000U
+
+#define GPIO_PUPDR_PUPDR14 0x30000000U
+#define GPIO_PUPDR_PUPDR14_0 0x10000000U
+#define GPIO_PUPDR_PUPDR14_1 0x20000000U
+
+#define GPIO_PUPDR_PUPDR15 0xC0000000U
+#define GPIO_PUPDR_PUPDR15_0 0x40000000U
+#define GPIO_PUPDR_PUPDR15_1 0x80000000U
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 0x00000001U
+#define GPIO_IDR_IDR_1 0x00000002U
+#define GPIO_IDR_IDR_2 0x00000004U
+#define GPIO_IDR_IDR_3 0x00000008U
+#define GPIO_IDR_IDR_4 0x00000010U
+#define GPIO_IDR_IDR_5 0x00000020U
+#define GPIO_IDR_IDR_6 0x00000040U
+#define GPIO_IDR_IDR_7 0x00000080U
+#define GPIO_IDR_IDR_8 0x00000100U
+#define GPIO_IDR_IDR_9 0x00000200U
+#define GPIO_IDR_IDR_10 0x00000400U
+#define GPIO_IDR_IDR_11 0x00000800U
+#define GPIO_IDR_IDR_12 0x00001000U
+#define GPIO_IDR_IDR_13 0x00002000U
+#define GPIO_IDR_IDR_14 0x00004000U
+#define GPIO_IDR_IDR_15 0x00008000U
+/* Old GPIO_IDR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_IDR_0 GPIO_IDR_IDR_0
+#define GPIO_OTYPER_IDR_1 GPIO_IDR_IDR_1
+#define GPIO_OTYPER_IDR_2 GPIO_IDR_IDR_2
+#define GPIO_OTYPER_IDR_3 GPIO_IDR_IDR_3
+#define GPIO_OTYPER_IDR_4 GPIO_IDR_IDR_4
+#define GPIO_OTYPER_IDR_5 GPIO_IDR_IDR_5
+#define GPIO_OTYPER_IDR_6 GPIO_IDR_IDR_6
+#define GPIO_OTYPER_IDR_7 GPIO_IDR_IDR_7
+#define GPIO_OTYPER_IDR_8 GPIO_IDR_IDR_8
+#define GPIO_OTYPER_IDR_9 GPIO_IDR_IDR_9
+#define GPIO_OTYPER_IDR_10 GPIO_IDR_IDR_10
+#define GPIO_OTYPER_IDR_11 GPIO_IDR_IDR_11
+#define GPIO_OTYPER_IDR_12 GPIO_IDR_IDR_12
+#define GPIO_OTYPER_IDR_13 GPIO_IDR_IDR_13
+#define GPIO_OTYPER_IDR_14 GPIO_IDR_IDR_14
+#define GPIO_OTYPER_IDR_15 GPIO_IDR_IDR_15
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 0x00000001U
+#define GPIO_ODR_ODR_1 0x00000002U
+#define GPIO_ODR_ODR_2 0x00000004U
+#define GPIO_ODR_ODR_3 0x00000008U
+#define GPIO_ODR_ODR_4 0x00000010U
+#define GPIO_ODR_ODR_5 0x00000020U
+#define GPIO_ODR_ODR_6 0x00000040U
+#define GPIO_ODR_ODR_7 0x00000080U
+#define GPIO_ODR_ODR_8 0x00000100U
+#define GPIO_ODR_ODR_9 0x00000200U
+#define GPIO_ODR_ODR_10 0x00000400U
+#define GPIO_ODR_ODR_11 0x00000800U
+#define GPIO_ODR_ODR_12 0x00001000U
+#define GPIO_ODR_ODR_13 0x00002000U
+#define GPIO_ODR_ODR_14 0x00004000U
+#define GPIO_ODR_ODR_15 0x00008000U
+/* Old GPIO_ODR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_ODR_0 GPIO_ODR_ODR_0
+#define GPIO_OTYPER_ODR_1 GPIO_ODR_ODR_1
+#define GPIO_OTYPER_ODR_2 GPIO_ODR_ODR_2
+#define GPIO_OTYPER_ODR_3 GPIO_ODR_ODR_3
+#define GPIO_OTYPER_ODR_4 GPIO_ODR_ODR_4
+#define GPIO_OTYPER_ODR_5 GPIO_ODR_ODR_5
+#define GPIO_OTYPER_ODR_6 GPIO_ODR_ODR_6
+#define GPIO_OTYPER_ODR_7 GPIO_ODR_ODR_7
+#define GPIO_OTYPER_ODR_8 GPIO_ODR_ODR_8
+#define GPIO_OTYPER_ODR_9 GPIO_ODR_ODR_9
+#define GPIO_OTYPER_ODR_10 GPIO_ODR_ODR_10
+#define GPIO_OTYPER_ODR_11 GPIO_ODR_ODR_11
+#define GPIO_OTYPER_ODR_12 GPIO_ODR_ODR_12
+#define GPIO_OTYPER_ODR_13 GPIO_ODR_ODR_13
+#define GPIO_OTYPER_ODR_14 GPIO_ODR_ODR_14
+#define GPIO_OTYPER_ODR_15 GPIO_ODR_ODR_15
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 0x00000001U
+#define GPIO_BSRR_BS_1 0x00000002U
+#define GPIO_BSRR_BS_2 0x00000004U
+#define GPIO_BSRR_BS_3 0x00000008U
+#define GPIO_BSRR_BS_4 0x00000010U
+#define GPIO_BSRR_BS_5 0x00000020U
+#define GPIO_BSRR_BS_6 0x00000040U
+#define GPIO_BSRR_BS_7 0x00000080U
+#define GPIO_BSRR_BS_8 0x00000100U
+#define GPIO_BSRR_BS_9 0x00000200U
+#define GPIO_BSRR_BS_10 0x00000400U
+#define GPIO_BSRR_BS_11 0x00000800U
+#define GPIO_BSRR_BS_12 0x00001000U
+#define GPIO_BSRR_BS_13 0x00002000U
+#define GPIO_BSRR_BS_14 0x00004000U
+#define GPIO_BSRR_BS_15 0x00008000U
+#define GPIO_BSRR_BR_0 0x00010000U
+#define GPIO_BSRR_BR_1 0x00020000U
+#define GPIO_BSRR_BR_2 0x00040000U
+#define GPIO_BSRR_BR_3 0x00080000U
+#define GPIO_BSRR_BR_4 0x00100000U
+#define GPIO_BSRR_BR_5 0x00200000U
+#define GPIO_BSRR_BR_6 0x00400000U
+#define GPIO_BSRR_BR_7 0x00800000U
+#define GPIO_BSRR_BR_8 0x01000000U
+#define GPIO_BSRR_BR_9 0x02000000U
+#define GPIO_BSRR_BR_10 0x04000000U
+#define GPIO_BSRR_BR_11 0x08000000U
+#define GPIO_BSRR_BR_12 0x10000000U
+#define GPIO_BSRR_BR_13 0x20000000U
+#define GPIO_BSRR_BR_14 0x40000000U
+#define GPIO_BSRR_BR_15 0x80000000U
+
+/****************** Bit definition for GPIO_LCKR register *********************/
+#define GPIO_LCKR_LCK0 0x00000001U
+#define GPIO_LCKR_LCK1 0x00000002U
+#define GPIO_LCKR_LCK2 0x00000004U
+#define GPIO_LCKR_LCK3 0x00000008U
+#define GPIO_LCKR_LCK4 0x00000010U
+#define GPIO_LCKR_LCK5 0x00000020U
+#define GPIO_LCKR_LCK6 0x00000040U
+#define GPIO_LCKR_LCK7 0x00000080U
+#define GPIO_LCKR_LCK8 0x00000100U
+#define GPIO_LCKR_LCK9 0x00000200U
+#define GPIO_LCKR_LCK10 0x00000400U
+#define GPIO_LCKR_LCK11 0x00000800U
+#define GPIO_LCKR_LCK12 0x00001000U
+#define GPIO_LCKR_LCK13 0x00002000U
+#define GPIO_LCKR_LCK14 0x00004000U
+#define GPIO_LCKR_LCK15 0x00008000U
+#define GPIO_LCKR_LCKK 0x00010000U
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE 0x00000001U /*!<Peripheral Enable */
+#define I2C_CR1_SMBUS 0x00000002U /*!<SMBus Mode */
+#define I2C_CR1_SMBTYPE 0x00000008U /*!<SMBus Type */
+#define I2C_CR1_ENARP 0x00000010U /*!<ARP Enable */
+#define I2C_CR1_ENPEC 0x00000020U /*!<PEC Enable */
+#define I2C_CR1_ENGC 0x00000040U /*!<General Call Enable */
+#define I2C_CR1_NOSTRETCH 0x00000080U /*!<Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START 0x00000100U /*!<Start Generation */
+#define I2C_CR1_STOP 0x00000200U /*!<Stop Generation */
+#define I2C_CR1_ACK 0x00000400U /*!<Acknowledge Enable */
+#define I2C_CR1_POS 0x00000800U /*!<Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC 0x00001000U /*!<Packet Error Checking */
+#define I2C_CR1_ALERT 0x00002000U /*!<SMBus Alert */
+#define I2C_CR1_SWRST 0x00008000U /*!<Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ 0x0000003FU /*!<FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 0x00000001U /*!<Bit 0 */
+#define I2C_CR2_FREQ_1 0x00000002U /*!<Bit 1 */
+#define I2C_CR2_FREQ_2 0x00000004U /*!<Bit 2 */
+#define I2C_CR2_FREQ_3 0x00000008U /*!<Bit 3 */
+#define I2C_CR2_FREQ_4 0x00000010U /*!<Bit 4 */
+#define I2C_CR2_FREQ_5 0x00000020U /*!<Bit 5 */
+
+#define I2C_CR2_ITERREN 0x00000100U /*!<Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN 0x00000200U /*!<Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN 0x00000400U /*!<Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN 0x00000800U /*!<DMA Requests Enable */
+#define I2C_CR2_LAST 0x00001000U /*!<DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 0x000000FEU /*!<Interface Address */
+#define I2C_OAR1_ADD8_9 0x00000300U /*!<Interface Address */
+
+#define I2C_OAR1_ADD0 0x00000001U /*!<Bit 0 */
+#define I2C_OAR1_ADD1 0x00000002U /*!<Bit 1 */
+#define I2C_OAR1_ADD2 0x00000004U /*!<Bit 2 */
+#define I2C_OAR1_ADD3 0x00000008U /*!<Bit 3 */
+#define I2C_OAR1_ADD4 0x00000010U /*!<Bit 4 */
+#define I2C_OAR1_ADD5 0x00000020U /*!<Bit 5 */
+#define I2C_OAR1_ADD6 0x00000040U /*!<Bit 6 */
+#define I2C_OAR1_ADD7 0x00000080U /*!<Bit 7 */
+#define I2C_OAR1_ADD8 0x00000100U /*!<Bit 8 */
+#define I2C_OAR1_ADD9 0x00000200U /*!<Bit 9 */
+
+#define I2C_OAR1_ADDMODE 0x00008000U /*!<Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL 0x00000001U /*!<Dual addressing mode enable */
+#define I2C_OAR2_ADD2 0x000000FEU /*!<Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR 0x000000FFU /*!<8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB 0x00000001U /*!<Start Bit (Master mode) */
+#define I2C_SR1_ADDR 0x00000002U /*!<Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF 0x00000004U /*!<Byte Transfer Finished */
+#define I2C_SR1_ADD10 0x00000008U /*!<10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF 0x00000010U /*!<Stop detection (Slave mode) */
+#define I2C_SR1_RXNE 0x00000040U /*!<Data Register not Empty (receivers) */
+#define I2C_SR1_TXE 0x00000080U /*!<Data Register Empty (transmitters) */
+#define I2C_SR1_BERR 0x00000100U /*!<Bus Error */
+#define I2C_SR1_ARLO 0x00000200U /*!<Arbitration Lost (master mode) */
+#define I2C_SR1_AF 0x00000400U /*!<Acknowledge Failure */
+#define I2C_SR1_OVR 0x00000800U /*!<Overrun/Underrun */
+#define I2C_SR1_PECERR 0x00001000U /*!<PEC Error in reception */
+#define I2C_SR1_TIMEOUT 0x00004000U /*!<Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT 0x00008000U /*!<SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL 0x00000001U /*!<Master/Slave */
+#define I2C_SR2_BUSY 0x00000002U /*!<Bus Busy */
+#define I2C_SR2_TRA 0x00000004U /*!<Transmitter/Receiver */
+#define I2C_SR2_GENCALL 0x00000010U /*!<General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT 0x00000020U /*!<SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST 0x00000040U /*!<SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF 0x00000080U /*!<Dual Flag (Slave mode) */
+#define I2C_SR2_PEC 0x0000FF00U /*!<Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR 0x00000FFFU /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY 0x00004000U /*!<Fast Mode Duty Cycle */
+#define I2C_CCR_FS 0x00008000U /*!<I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE 0x0000003FU /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/****************** Bit definition for I2C_FLTR register *******************/
+#define I2C_FLTR_DNF 0x0000000FU /*!<Digital Noise Filter */
+#define I2C_FLTR_ANOFF 0x00000010U /*!<Analog Noise Filter OFF */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY 0xFFFFU /*!<Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR 0x07U /*!<PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 0x01U /*!<Bit 0 */
+#define IWDG_PR_PR_1 0x02U /*!<Bit 1 */
+#define IWDG_PR_PR_2 0x04U /*!<Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL 0x0FFFU /*!<Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU 0x01U /*!<Watchdog prescaler value update */
+#define IWDG_SR_RVU 0x02U /*!<Watchdog counter reload value update */
+
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS 0x00000001U /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS 0x00000002U /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF 0x00000004U /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF 0x00000008U /*!< Clear Standby Flag */
+#define PWR_CR_PVDE 0x00000010U /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS 0x000000E0U /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 0x00000020U /*!< Bit 0 */
+#define PWR_CR_PLS_1 0x00000040U /*!< Bit 1 */
+#define PWR_CR_PLS_2 0x00000080U /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 7 */
+
+#define PWR_CR_DBP 0x00000100U /*!< Disable Backup Domain write protection */
+#define PWR_CR_FPDS 0x00000200U /*!< Flash power down in Stop mode */
+#define PWR_CR_LPLVDS 0x00000400U /*!< Low Power Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_MRLVDS 0x00000800U /*!< Main Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_ADCDC1 0x00002000U /*!< Refer to AN4073 on how to use this bit */
+#define PWR_CR_VOS 0x0000C000U /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define PWR_CR_VOS_0 0x00004000U /*!< Bit 0 */
+#define PWR_CR_VOS_1 0x00008000U /*!< Bit 1 */
+
+/* Legacy define */
+#define PWR_CR_PMODE PWR_CR_VOS
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF 0x00000001U /*!< Wakeup Flag */
+#define PWR_CSR_SBF 0x00000002U /*!< Standby Flag */
+#define PWR_CSR_PVDO 0x00000004U /*!< PVD Output */
+#define PWR_CSR_BRR 0x00000008U /*!< Backup regulator ready */
+#define PWR_CSR_EWUP 0x00000100U /*!< Enable WKUP pin */
+#define PWR_CSR_BRE 0x00000200U /*!< Backup regulator enable */
+#define PWR_CSR_VOSRDY 0x00004000U /*!< Regulator voltage scaling output selection ready */
+
+/* Legacy define */
+#define PWR_CSR_REGRDY PWR_CSR_VOSRDY
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION 0x00000001U
+#define RCC_CR_HSIRDY 0x00000002U
+
+#define RCC_CR_HSITRIM 0x000000F8U
+#define RCC_CR_HSITRIM_0 0x00000008U/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 0x00000010U/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 0x00000020U/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 0x00000040U/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 0x00000080U/*!<Bit 4 */
+
+#define RCC_CR_HSICAL 0x0000FF00U
+#define RCC_CR_HSICAL_0 0x00000100U/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 0x00000200U/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 0x00000400U/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 0x00000800U/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 0x00001000U/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 0x00002000U/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 0x00004000U/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 0x00008000U/*!<Bit 7 */
+
+#define RCC_CR_HSEON 0x00010000U
+#define RCC_CR_HSERDY 0x00020000U
+#define RCC_CR_HSEBYP 0x00040000U
+#define RCC_CR_CSSON 0x00080000U
+#define RCC_CR_PLLON 0x01000000U
+#define RCC_CR_PLLRDY 0x02000000U
+#define RCC_CR_PLLI2SON 0x04000000U
+#define RCC_CR_PLLI2SRDY 0x08000000U
+
+/******************** Bit definition for RCC_PLLCFGR register ***************/
+#define RCC_PLLCFGR_PLLM 0x0000003FU
+#define RCC_PLLCFGR_PLLM_0 0x00000001U
+#define RCC_PLLCFGR_PLLM_1 0x00000002U
+#define RCC_PLLCFGR_PLLM_2 0x00000004U
+#define RCC_PLLCFGR_PLLM_3 0x00000008U
+#define RCC_PLLCFGR_PLLM_4 0x00000010U
+#define RCC_PLLCFGR_PLLM_5 0x00000020U
+
+#define RCC_PLLCFGR_PLLN 0x00007FC0U
+#define RCC_PLLCFGR_PLLN_0 0x00000040U
+#define RCC_PLLCFGR_PLLN_1 0x00000080U
+#define RCC_PLLCFGR_PLLN_2 0x00000100U
+#define RCC_PLLCFGR_PLLN_3 0x00000200U
+#define RCC_PLLCFGR_PLLN_4 0x00000400U
+#define RCC_PLLCFGR_PLLN_5 0x00000800U
+#define RCC_PLLCFGR_PLLN_6 0x00001000U
+#define RCC_PLLCFGR_PLLN_7 0x00002000U
+#define RCC_PLLCFGR_PLLN_8 0x00004000U
+
+#define RCC_PLLCFGR_PLLP 0x00030000U
+#define RCC_PLLCFGR_PLLP_0 0x00010000U
+#define RCC_PLLCFGR_PLLP_1 0x00020000U
+
+#define RCC_PLLCFGR_PLLSRC 0x00400000U
+#define RCC_PLLCFGR_PLLSRC_HSE 0x00400000U
+#define RCC_PLLCFGR_PLLSRC_HSI 0x00000000U
+
+#define RCC_PLLCFGR_PLLQ 0x0F000000U
+#define RCC_PLLCFGR_PLLQ_0 0x01000000U
+#define RCC_PLLCFGR_PLLQ_1 0x02000000U
+#define RCC_PLLCFGR_PLLQ_2 0x04000000U
+#define RCC_PLLCFGR_PLLQ_3 0x08000000U
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW 0x00000003U /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 0x00000001U /*!< Bit 0 */
+#define RCC_CFGR_SW_1 0x00000002U /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS 0x0000000CU /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 0x00000004U /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 0x00000008U /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE 0x000000F0U /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 0x00000010U /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 0x00000020U /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 0x00000040U /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 0x00000080U /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 0x00001C00U /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 0x00000400U /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 0x00000800U /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 0x00001000U /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 0x00001000U /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 0x00001400U /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 0x00001800U /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 0x00001C00U /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 0x0000E000U /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 0x00002000U /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 0x00004000U /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 0x00008000U /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 0x00008000U /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 0x0000A000U /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 0x0000C000U /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 0x0000E000U /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define RCC_CFGR_RTCPRE 0x001F0000U
+#define RCC_CFGR_RTCPRE_0 0x00010000U
+#define RCC_CFGR_RTCPRE_1 0x00020000U
+#define RCC_CFGR_RTCPRE_2 0x00040000U
+#define RCC_CFGR_RTCPRE_3 0x00080000U
+#define RCC_CFGR_RTCPRE_4 0x00100000U
+
+/*!< MCO1 configuration */
+#define RCC_CFGR_MCO1 0x00600000U
+#define RCC_CFGR_MCO1_0 0x00200000U
+#define RCC_CFGR_MCO1_1 0x00400000U
+
+#define RCC_CFGR_I2SSRC 0x00800000U
+
+#define RCC_CFGR_MCO1PRE 0x07000000U
+#define RCC_CFGR_MCO1PRE_0 0x01000000U
+#define RCC_CFGR_MCO1PRE_1 0x02000000U
+#define RCC_CFGR_MCO1PRE_2 0x04000000U
+
+#define RCC_CFGR_MCO2PRE 0x38000000U
+#define RCC_CFGR_MCO2PRE_0 0x08000000U
+#define RCC_CFGR_MCO2PRE_1 0x10000000U
+#define RCC_CFGR_MCO2PRE_2 0x20000000U
+
+#define RCC_CFGR_MCO2 0xC0000000U
+#define RCC_CFGR_MCO2_0 0x40000000U
+#define RCC_CFGR_MCO2_1 0x80000000U
+
+/******************** Bit definition for RCC_CIR register *******************/
+#define RCC_CIR_LSIRDYF 0x00000001U
+#define RCC_CIR_LSERDYF 0x00000002U
+#define RCC_CIR_HSIRDYF 0x00000004U
+#define RCC_CIR_HSERDYF 0x00000008U
+#define RCC_CIR_PLLRDYF 0x00000010U
+#define RCC_CIR_PLLI2SRDYF 0x00000020U
+
+#define RCC_CIR_CSSF 0x00000080U
+#define RCC_CIR_LSIRDYIE 0x00000100U
+#define RCC_CIR_LSERDYIE 0x00000200U
+#define RCC_CIR_HSIRDYIE 0x00000400U
+#define RCC_CIR_HSERDYIE 0x00000800U
+#define RCC_CIR_PLLRDYIE 0x00001000U
+#define RCC_CIR_PLLI2SRDYIE 0x00002000U
+
+#define RCC_CIR_LSIRDYC 0x00010000U
+#define RCC_CIR_LSERDYC 0x00020000U
+#define RCC_CIR_HSIRDYC 0x00040000U
+#define RCC_CIR_HSERDYC 0x00080000U
+#define RCC_CIR_PLLRDYC 0x00100000U
+#define RCC_CIR_PLLI2SRDYC 0x00200000U
+
+#define RCC_CIR_CSSC 0x00800000U
+
+/******************** Bit definition for RCC_AHB1RSTR register **************/
+#define RCC_AHB1RSTR_GPIOARST 0x00000001U
+#define RCC_AHB1RSTR_GPIOBRST 0x00000002U
+#define RCC_AHB1RSTR_GPIOCRST 0x00000004U
+#define RCC_AHB1RSTR_GPIODRST 0x00000008U
+#define RCC_AHB1RSTR_GPIOERST 0x00000010U
+#define RCC_AHB1RSTR_GPIOHRST 0x00000080U
+#define RCC_AHB1RSTR_CRCRST 0x00001000U
+#define RCC_AHB1RSTR_DMA1RST 0x00200000U
+#define RCC_AHB1RSTR_DMA2RST 0x00400000U
+
+/******************** Bit definition for RCC_AHB2RSTR register **************/
+#define RCC_AHB2RSTR_OTGFSRST 0x00000080U
+
+/******************** Bit definition for RCC_AHB3RSTR register **************/
+
+/******************** Bit definition for RCC_APB1RSTR register **************/
+#define RCC_APB1RSTR_TIM2RST 0x00000001U
+#define RCC_APB1RSTR_TIM3RST 0x00000002U
+#define RCC_APB1RSTR_TIM4RST 0x00000004U
+#define RCC_APB1RSTR_TIM5RST 0x00000008U
+#define RCC_APB1RSTR_WWDGRST 0x00000800U
+#define RCC_APB1RSTR_SPI2RST 0x00004000U
+#define RCC_APB1RSTR_SPI3RST 0x00008000U
+#define RCC_APB1RSTR_USART2RST 0x00020000U
+#define RCC_APB1RSTR_I2C1RST 0x00200000U
+#define RCC_APB1RSTR_I2C2RST 0x00400000U
+#define RCC_APB1RSTR_I2C3RST 0x00800000U
+#define RCC_APB1RSTR_PWRRST 0x10000000U
+
+/******************** Bit definition for RCC_APB2RSTR register **************/
+#define RCC_APB2RSTR_TIM1RST 0x00000001U
+#define RCC_APB2RSTR_USART1RST 0x00000010U
+#define RCC_APB2RSTR_USART6RST 0x00000020U
+#define RCC_APB2RSTR_ADCRST 0x00000100U
+#define RCC_APB2RSTR_SDIORST 0x00000800U
+#define RCC_APB2RSTR_SPI1RST 0x00001000U
+#define RCC_APB2RSTR_SPI4RST 0x00002000U
+#define RCC_APB2RSTR_SYSCFGRST 0x00004000U
+#define RCC_APB2RSTR_TIM9RST 0x00010000U
+#define RCC_APB2RSTR_TIM10RST 0x00020000U
+#define RCC_APB2RSTR_TIM11RST 0x00040000U
+
+/* Old SPI1RST bit definition, maintained for legacy purpose */
+#define RCC_APB2RSTR_SPI1 RCC_APB2RSTR_SPI1RST
+
+/******************** Bit definition for RCC_AHB1ENR register ***************/
+#define RCC_AHB1ENR_GPIOAEN 0x00000001U
+#define RCC_AHB1ENR_GPIOBEN 0x00000002U
+#define RCC_AHB1ENR_GPIOCEN 0x00000004U
+#define RCC_AHB1ENR_GPIODEN 0x00000008U
+#define RCC_AHB1ENR_GPIOEEN 0x00000010U
+#define RCC_AHB1ENR_GPIOHEN 0x00000080U
+#define RCC_AHB1ENR_CRCEN 0x00001000U
+#define RCC_AHB1ENR_BKPSRAMEN 0x00040000U
+#define RCC_AHB1ENR_DMA1EN 0x00200000U
+#define RCC_AHB1ENR_DMA2EN 0x00400000U
+
+/******************** Bit definition for RCC_AHB2ENR register ***************/
+#define RCC_AHB2ENR_OTGFSEN 0x00000080U
+
+/******************** Bit definition for RCC_AHB3ENR register ***************/
+
+/******************** Bit definition for RCC_APB1ENR register ***************/
+#define RCC_APB1ENR_TIM2EN 0x00000001U
+#define RCC_APB1ENR_TIM3EN 0x00000002U
+#define RCC_APB1ENR_TIM4EN 0x00000004U
+#define RCC_APB1ENR_TIM5EN 0x00000008U
+#define RCC_APB1ENR_WWDGEN 0x00000800U
+#define RCC_APB1ENR_SPI2EN 0x00004000U
+#define RCC_APB1ENR_SPI3EN 0x00008000U
+#define RCC_APB1ENR_USART2EN 0x00020000U
+#define RCC_APB1ENR_I2C1EN 0x00200000U
+#define RCC_APB1ENR_I2C2EN 0x00400000U
+#define RCC_APB1ENR_I2C3EN 0x00800000U
+#define RCC_APB1ENR_PWREN 0x10000000U
+
+/******************** Bit definition for RCC_APB2ENR register ***************/
+#define RCC_APB2ENR_TIM1EN 0x00000001U
+#define RCC_APB2ENR_USART1EN 0x00000010U
+#define RCC_APB2ENR_USART6EN 0x00000020U
+#define RCC_APB2ENR_ADC1EN 0x00000100U
+#define RCC_APB2ENR_SDIOEN 0x00000800U
+#define RCC_APB2ENR_SPI1EN 0x00001000U
+#define RCC_APB2ENR_SPI4EN 0x00002000U
+#define RCC_APB2ENR_SYSCFGEN 0x00004000U
+#define RCC_APB2ENR_TIM9EN 0x00010000U
+#define RCC_APB2ENR_TIM10EN 0x00020000U
+#define RCC_APB2ENR_TIM11EN 0x00040000U
+
+/******************** Bit definition for RCC_AHB1LPENR register *************/
+#define RCC_AHB1LPENR_GPIOALPEN 0x00000001U
+#define RCC_AHB1LPENR_GPIOBLPEN 0x00000002U
+#define RCC_AHB1LPENR_GPIOCLPEN 0x00000004U
+#define RCC_AHB1LPENR_GPIODLPEN 0x00000008U
+#define RCC_AHB1LPENR_GPIOELPEN 0x00000010U
+#define RCC_AHB1LPENR_GPIOHLPEN 0x00000080U
+#define RCC_AHB1LPENR_CRCLPEN 0x00001000U
+#define RCC_AHB1LPENR_FLITFLPEN 0x00008000U
+#define RCC_AHB1LPENR_SRAM1LPEN 0x00010000U
+#define RCC_AHB1LPENR_SRAM2LPEN 0x00020000U
+#define RCC_AHB1LPENR_BKPSRAMLPEN 0x00040000U
+#define RCC_AHB1LPENR_DMA1LPEN 0x00200000U
+#define RCC_AHB1LPENR_DMA2LPEN 0x00400000U
+
+/******************** Bit definition for RCC_AHB2LPENR register *************/
+#define RCC_AHB2LPENR_OTGFSLPEN 0x00000080U
+
+/******************** Bit definition for RCC_AHB3LPENR register *************/
+
+/******************** Bit definition for RCC_APB1LPENR register *************/
+#define RCC_APB1LPENR_TIM2LPEN 0x00000001U
+#define RCC_APB1LPENR_TIM3LPEN 0x00000002U
+#define RCC_APB1LPENR_TIM4LPEN 0x00000004U
+#define RCC_APB1LPENR_TIM5LPEN 0x00000008U
+#define RCC_APB1LPENR_WWDGLPEN 0x00000800U
+#define RCC_APB1LPENR_SPI2LPEN 0x00004000U
+#define RCC_APB1LPENR_SPI3LPEN 0x00008000U
+#define RCC_APB1LPENR_USART2LPEN 0x00020000U
+#define RCC_APB1LPENR_I2C1LPEN 0x00200000U
+#define RCC_APB1LPENR_I2C2LPEN 0x00400000U
+#define RCC_APB1LPENR_I2C3LPEN 0x00800000U
+#define RCC_APB1LPENR_PWRLPEN 0x10000000U
+#define RCC_APB1LPENR_DACLPEN 0x20000000U
+
+/******************** Bit definition for RCC_APB2LPENR register *************/
+#define RCC_APB2LPENR_TIM1LPEN 0x00000001U
+#define RCC_APB2LPENR_USART1LPEN 0x00000010U
+#define RCC_APB2LPENR_USART6LPEN 0x00000020U
+#define RCC_APB2LPENR_ADC1LPEN 0x00000100U
+#define RCC_APB2LPENR_SDIOLPEN 0x00000800U
+#define RCC_APB2LPENR_SPI1LPEN 0x00001000U
+#define RCC_APB2LPENR_SPI4LPEN 0x00002000U
+#define RCC_APB2LPENR_SYSCFGLPEN 0x00004000U
+#define RCC_APB2LPENR_TIM9LPEN 0x00010000U
+#define RCC_APB2LPENR_TIM10LPEN 0x00020000U
+#define RCC_APB2LPENR_TIM11LPEN 0x00040000U
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON 0x00000001U
+#define RCC_BDCR_LSERDY 0x00000002U
+#define RCC_BDCR_LSEBYP 0x00000004U
+
+#define RCC_BDCR_RTCSEL 0x00000300U
+#define RCC_BDCR_RTCSEL_0 0x00000100U
+#define RCC_BDCR_RTCSEL_1 0x00000200U
+
+#define RCC_BDCR_RTCEN 0x00008000U
+#define RCC_BDCR_BDRST 0x00010000U
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION 0x00000001U
+#define RCC_CSR_LSIRDY 0x00000002U
+#define RCC_CSR_RMVF 0x01000000U
+#define RCC_CSR_BORRSTF 0x02000000U
+#define RCC_CSR_PADRSTF 0x04000000U
+#define RCC_CSR_PORRSTF 0x08000000U
+#define RCC_CSR_SFTRSTF 0x10000000U
+#define RCC_CSR_WDGRSTF 0x20000000U
+#define RCC_CSR_WWDGRSTF 0x40000000U
+#define RCC_CSR_LPWRRSTF 0x80000000U
+
+/******************** Bit definition for RCC_SSCGR register *****************/
+#define RCC_SSCGR_MODPER 0x00001FFFU
+#define RCC_SSCGR_INCSTEP 0x0FFFE000U
+#define RCC_SSCGR_SPREADSEL 0x40000000U
+#define RCC_SSCGR_SSCGEN 0x80000000U
+
+/******************** Bit definition for RCC_PLLI2SCFGR register ************/
+#define RCC_PLLI2SCFGR_PLLI2SN 0x00007FC0U
+#define RCC_PLLI2SCFGR_PLLI2SN_0 0x00000040U
+#define RCC_PLLI2SCFGR_PLLI2SN_1 0x00000080U
+#define RCC_PLLI2SCFGR_PLLI2SN_2 0x00000100U
+#define RCC_PLLI2SCFGR_PLLI2SN_3 0x00000200U
+#define RCC_PLLI2SCFGR_PLLI2SN_4 0x00000400U
+#define RCC_PLLI2SCFGR_PLLI2SN_5 0x00000800U
+#define RCC_PLLI2SCFGR_PLLI2SN_6 0x00001000U
+#define RCC_PLLI2SCFGR_PLLI2SN_7 0x00002000U
+#define RCC_PLLI2SCFGR_PLLI2SN_8 0x00004000U
+
+#define RCC_PLLI2SCFGR_PLLI2SR 0x70000000U
+#define RCC_PLLI2SCFGR_PLLI2SR_0 0x10000000U
+#define RCC_PLLI2SCFGR_PLLI2SR_1 0x20000000U
+#define RCC_PLLI2SCFGR_PLLI2SR_2 0x40000000U
+
+/******************** Bit definition for RCC_DCKCFGR register ***************/
+#define RCC_DCKCFGR_TIMPRE 0x01000000U
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM 0x00400000U
+#define RTC_TR_HT 0x00300000U
+#define RTC_TR_HT_0 0x00100000U
+#define RTC_TR_HT_1 0x00200000U
+#define RTC_TR_HU 0x000F0000U
+#define RTC_TR_HU_0 0x00010000U
+#define RTC_TR_HU_1 0x00020000U
+#define RTC_TR_HU_2 0x00040000U
+#define RTC_TR_HU_3 0x00080000U
+#define RTC_TR_MNT 0x00007000U
+#define RTC_TR_MNT_0 0x00001000U
+#define RTC_TR_MNT_1 0x00002000U
+#define RTC_TR_MNT_2 0x00004000U
+#define RTC_TR_MNU 0x00000F00U
+#define RTC_TR_MNU_0 0x00000100U
+#define RTC_TR_MNU_1 0x00000200U
+#define RTC_TR_MNU_2 0x00000400U
+#define RTC_TR_MNU_3 0x00000800U
+#define RTC_TR_ST 0x00000070U
+#define RTC_TR_ST_0 0x00000010U
+#define RTC_TR_ST_1 0x00000020U
+#define RTC_TR_ST_2 0x00000040U
+#define RTC_TR_SU 0x0000000FU
+#define RTC_TR_SU_0 0x00000001U
+#define RTC_TR_SU_1 0x00000002U
+#define RTC_TR_SU_2 0x00000004U
+#define RTC_TR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT 0x00F00000U
+#define RTC_DR_YT_0 0x00100000U
+#define RTC_DR_YT_1 0x00200000U
+#define RTC_DR_YT_2 0x00400000U
+#define RTC_DR_YT_3 0x00800000U
+#define RTC_DR_YU 0x000F0000U
+#define RTC_DR_YU_0 0x00010000U
+#define RTC_DR_YU_1 0x00020000U
+#define RTC_DR_YU_2 0x00040000U
+#define RTC_DR_YU_3 0x00080000U
+#define RTC_DR_WDU 0x0000E000U
+#define RTC_DR_WDU_0 0x00002000U
+#define RTC_DR_WDU_1 0x00004000U
+#define RTC_DR_WDU_2 0x00008000U
+#define RTC_DR_MT 0x00001000U
+#define RTC_DR_MU 0x00000F00U
+#define RTC_DR_MU_0 0x00000100U
+#define RTC_DR_MU_1 0x00000200U
+#define RTC_DR_MU_2 0x00000400U
+#define RTC_DR_MU_3 0x00000800U
+#define RTC_DR_DT 0x00000030U
+#define RTC_DR_DT_0 0x00000010U
+#define RTC_DR_DT_1 0x00000020U
+#define RTC_DR_DU 0x0000000FU
+#define RTC_DR_DU_0 0x00000001U
+#define RTC_DR_DU_1 0x00000002U
+#define RTC_DR_DU_2 0x00000004U
+#define RTC_DR_DU_3 0x00000008U
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE 0x00800000U
+#define RTC_CR_OSEL 0x00600000U
+#define RTC_CR_OSEL_0 0x00200000U
+#define RTC_CR_OSEL_1 0x00400000U
+#define RTC_CR_POL 0x00100000U
+#define RTC_CR_COSEL 0x00080000U
+#define RTC_CR_BCK 0x00040000U
+#define RTC_CR_SUB1H 0x00020000U
+#define RTC_CR_ADD1H 0x00010000U
+#define RTC_CR_TSIE 0x00008000U
+#define RTC_CR_WUTIE 0x00004000U
+#define RTC_CR_ALRBIE 0x00002000U
+#define RTC_CR_ALRAIE 0x00001000U
+#define RTC_CR_TSE 0x00000800U
+#define RTC_CR_WUTE 0x00000400U
+#define RTC_CR_ALRBE 0x00000200U
+#define RTC_CR_ALRAE 0x00000100U
+#define RTC_CR_DCE 0x00000080U
+#define RTC_CR_FMT 0x00000040U
+#define RTC_CR_BYPSHAD 0x00000020U
+#define RTC_CR_REFCKON 0x00000010U
+#define RTC_CR_TSEDGE 0x00000008U
+#define RTC_CR_WUCKSEL 0x00000007U
+#define RTC_CR_WUCKSEL_0 0x00000001U
+#define RTC_CR_WUCKSEL_1 0x00000002U
+#define RTC_CR_WUCKSEL_2 0x00000004U
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF 0x00010000U
+#define RTC_ISR_TAMP1F 0x00002000U
+#define RTC_ISR_TAMP2F 0x00004000U
+#define RTC_ISR_TSOVF 0x00001000U
+#define RTC_ISR_TSF 0x00000800U
+#define RTC_ISR_WUTF 0x00000400U
+#define RTC_ISR_ALRBF 0x00000200U
+#define RTC_ISR_ALRAF 0x00000100U
+#define RTC_ISR_INIT 0x00000080U
+#define RTC_ISR_INITF 0x00000040U
+#define RTC_ISR_RSF 0x00000020U
+#define RTC_ISR_INITS 0x00000010U
+#define RTC_ISR_SHPF 0x00000008U
+#define RTC_ISR_WUTWF 0x00000004U
+#define RTC_ISR_ALRBWF 0x00000002U
+#define RTC_ISR_ALRAWF 0x00000001U
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A 0x007F0000U
+#define RTC_PRER_PREDIV_S 0x00007FFFU
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT 0x0000FFFFU
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS 0x00000080U
+#define RTC_CALIBR_DC 0x0000001FU
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 0x80000000U
+#define RTC_ALRMAR_WDSEL 0x40000000U
+#define RTC_ALRMAR_DT 0x30000000U
+#define RTC_ALRMAR_DT_0 0x10000000U
+#define RTC_ALRMAR_DT_1 0x20000000U
+#define RTC_ALRMAR_DU 0x0F000000U
+#define RTC_ALRMAR_DU_0 0x01000000U
+#define RTC_ALRMAR_DU_1 0x02000000U
+#define RTC_ALRMAR_DU_2 0x04000000U
+#define RTC_ALRMAR_DU_3 0x08000000U
+#define RTC_ALRMAR_MSK3 0x00800000U
+#define RTC_ALRMAR_PM 0x00400000U
+#define RTC_ALRMAR_HT 0x00300000U
+#define RTC_ALRMAR_HT_0 0x00100000U
+#define RTC_ALRMAR_HT_1 0x00200000U
+#define RTC_ALRMAR_HU 0x000F0000U
+#define RTC_ALRMAR_HU_0 0x00010000U
+#define RTC_ALRMAR_HU_1 0x00020000U
+#define RTC_ALRMAR_HU_2 0x00040000U
+#define RTC_ALRMAR_HU_3 0x00080000U
+#define RTC_ALRMAR_MSK2 0x00008000U
+#define RTC_ALRMAR_MNT 0x00007000U
+#define RTC_ALRMAR_MNT_0 0x00001000U
+#define RTC_ALRMAR_MNT_1 0x00002000U
+#define RTC_ALRMAR_MNT_2 0x00004000U
+#define RTC_ALRMAR_MNU 0x00000F00U
+#define RTC_ALRMAR_MNU_0 0x00000100U
+#define RTC_ALRMAR_MNU_1 0x00000200U
+#define RTC_ALRMAR_MNU_2 0x00000400U
+#define RTC_ALRMAR_MNU_3 0x00000800U
+#define RTC_ALRMAR_MSK1 0x00000080U
+#define RTC_ALRMAR_ST 0x00000070U
+#define RTC_ALRMAR_ST_0 0x00000010U
+#define RTC_ALRMAR_ST_1 0x00000020U
+#define RTC_ALRMAR_ST_2 0x00000040U
+#define RTC_ALRMAR_SU 0x0000000FU
+#define RTC_ALRMAR_SU_0 0x00000001U
+#define RTC_ALRMAR_SU_1 0x00000002U
+#define RTC_ALRMAR_SU_2 0x00000004U
+#define RTC_ALRMAR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 0x80000000U
+#define RTC_ALRMBR_WDSEL 0x40000000U
+#define RTC_ALRMBR_DT 0x30000000U
+#define RTC_ALRMBR_DT_0 0x10000000U
+#define RTC_ALRMBR_DT_1 0x20000000U
+#define RTC_ALRMBR_DU 0x0F000000U
+#define RTC_ALRMBR_DU_0 0x01000000U
+#define RTC_ALRMBR_DU_1 0x02000000U
+#define RTC_ALRMBR_DU_2 0x04000000U
+#define RTC_ALRMBR_DU_3 0x08000000U
+#define RTC_ALRMBR_MSK3 0x00800000U
+#define RTC_ALRMBR_PM 0x00400000U
+#define RTC_ALRMBR_HT 0x00300000U
+#define RTC_ALRMBR_HT_0 0x00100000U
+#define RTC_ALRMBR_HT_1 0x00200000U
+#define RTC_ALRMBR_HU 0x000F0000U
+#define RTC_ALRMBR_HU_0 0x00010000U
+#define RTC_ALRMBR_HU_1 0x00020000U
+#define RTC_ALRMBR_HU_2 0x00040000U
+#define RTC_ALRMBR_HU_3 0x00080000U
+#define RTC_ALRMBR_MSK2 0x00008000U
+#define RTC_ALRMBR_MNT 0x00007000U
+#define RTC_ALRMBR_MNT_0 0x00001000U
+#define RTC_ALRMBR_MNT_1 0x00002000U
+#define RTC_ALRMBR_MNT_2 0x00004000U
+#define RTC_ALRMBR_MNU 0x00000F00U
+#define RTC_ALRMBR_MNU_0 0x00000100U
+#define RTC_ALRMBR_MNU_1 0x00000200U
+#define RTC_ALRMBR_MNU_2 0x00000400U
+#define RTC_ALRMBR_MNU_3 0x00000800U
+#define RTC_ALRMBR_MSK1 0x00000080U
+#define RTC_ALRMBR_ST 0x00000070U
+#define RTC_ALRMBR_ST_0 0x00000010U
+#define RTC_ALRMBR_ST_1 0x00000020U
+#define RTC_ALRMBR_ST_2 0x00000040U
+#define RTC_ALRMBR_SU 0x0000000FU
+#define RTC_ALRMBR_SU_0 0x00000001U
+#define RTC_ALRMBR_SU_1 0x00000002U
+#define RTC_ALRMBR_SU_2 0x00000004U
+#define RTC_ALRMBR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY 0x000000FFU
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS 0x0000FFFFU
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS 0x00007FFFU
+#define RTC_SHIFTR_ADD1S 0x80000000U
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM 0x00400000U
+#define RTC_TSTR_HT 0x00300000U
+#define RTC_TSTR_HT_0 0x00100000U
+#define RTC_TSTR_HT_1 0x00200000U
+#define RTC_TSTR_HU 0x000F0000U
+#define RTC_TSTR_HU_0 0x00010000U
+#define RTC_TSTR_HU_1 0x00020000U
+#define RTC_TSTR_HU_2 0x00040000U
+#define RTC_TSTR_HU_3 0x00080000U
+#define RTC_TSTR_MNT 0x00007000U
+#define RTC_TSTR_MNT_0 0x00001000U
+#define RTC_TSTR_MNT_1 0x00002000U
+#define RTC_TSTR_MNT_2 0x00004000U
+#define RTC_TSTR_MNU 0x00000F00U
+#define RTC_TSTR_MNU_0 0x00000100U
+#define RTC_TSTR_MNU_1 0x00000200U
+#define RTC_TSTR_MNU_2 0x00000400U
+#define RTC_TSTR_MNU_3 0x00000800U
+#define RTC_TSTR_ST 0x00000070U
+#define RTC_TSTR_ST_0 0x00000010U
+#define RTC_TSTR_ST_1 0x00000020U
+#define RTC_TSTR_ST_2 0x00000040U
+#define RTC_TSTR_SU 0x0000000FU
+#define RTC_TSTR_SU_0 0x00000001U
+#define RTC_TSTR_SU_1 0x00000002U
+#define RTC_TSTR_SU_2 0x00000004U
+#define RTC_TSTR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU 0x0000E000U
+#define RTC_TSDR_WDU_0 0x00002000U
+#define RTC_TSDR_WDU_1 0x00004000U
+#define RTC_TSDR_WDU_2 0x00008000U
+#define RTC_TSDR_MT 0x00001000U
+#define RTC_TSDR_MU 0x00000F00U
+#define RTC_TSDR_MU_0 0x00000100U
+#define RTC_TSDR_MU_1 0x00000200U
+#define RTC_TSDR_MU_2 0x00000400U
+#define RTC_TSDR_MU_3 0x00000800U
+#define RTC_TSDR_DT 0x00000030U
+#define RTC_TSDR_DT_0 0x00000010U
+#define RTC_TSDR_DT_1 0x00000020U
+#define RTC_TSDR_DU 0x0000000FU
+#define RTC_TSDR_DU_0 0x00000001U
+#define RTC_TSDR_DU_1 0x00000002U
+#define RTC_TSDR_DU_2 0x00000004U
+#define RTC_TSDR_DU_3 0x00000008U
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS 0x0000FFFFU
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP 0x00008000U
+#define RTC_CALR_CALW8 0x00004000U
+#define RTC_CALR_CALW16 0x00002000U
+#define RTC_CALR_CALM 0x000001FFU
+#define RTC_CALR_CALM_0 0x00000001U
+#define RTC_CALR_CALM_1 0x00000002U
+#define RTC_CALR_CALM_2 0x00000004U
+#define RTC_CALR_CALM_3 0x00000008U
+#define RTC_CALR_CALM_4 0x00000010U
+#define RTC_CALR_CALM_5 0x00000020U
+#define RTC_CALR_CALM_6 0x00000040U
+#define RTC_CALR_CALM_7 0x00000080U
+#define RTC_CALR_CALM_8 0x00000100U
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE 0x00040000U
+#define RTC_TAFCR_TSINSEL 0x00020000U
+#define RTC_TAFCR_TAMPINSEL 0x00010000U
+#define RTC_TAFCR_TAMPPUDIS 0x00008000U
+#define RTC_TAFCR_TAMPPRCH 0x00006000U
+#define RTC_TAFCR_TAMPPRCH_0 0x00002000U
+#define RTC_TAFCR_TAMPPRCH_1 0x00004000U
+#define RTC_TAFCR_TAMPFLT 0x00001800U
+#define RTC_TAFCR_TAMPFLT_0 0x00000800U
+#define RTC_TAFCR_TAMPFLT_1 0x00001000U
+#define RTC_TAFCR_TAMPFREQ 0x00000700U
+#define RTC_TAFCR_TAMPFREQ_0 0x00000100U
+#define RTC_TAFCR_TAMPFREQ_1 0x00000200U
+#define RTC_TAFCR_TAMPFREQ_2 0x00000400U
+#define RTC_TAFCR_TAMPTS 0x00000080U
+#define RTC_TAFCR_TAMP2TRG 0x00000010U
+#define RTC_TAFCR_TAMP2E 0x00000008U
+#define RTC_TAFCR_TAMPIE 0x00000004U
+#define RTC_TAFCR_TAMP1TRG 0x00000002U
+#define RTC_TAFCR_TAMP1E 0x00000001U
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS 0x0F000000U
+#define RTC_ALRMASSR_MASKSS_0 0x01000000U
+#define RTC_ALRMASSR_MASKSS_1 0x02000000U
+#define RTC_ALRMASSR_MASKSS_2 0x04000000U
+#define RTC_ALRMASSR_MASKSS_3 0x08000000U
+#define RTC_ALRMASSR_SS 0x00007FFFU
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS 0x0F000000U
+#define RTC_ALRMBSSR_MASKSS_0 0x01000000U
+#define RTC_ALRMBSSR_MASKSS_1 0x02000000U
+#define RTC_ALRMBSSR_MASKSS_2 0x04000000U
+#define RTC_ALRMBSSR_MASKSS_3 0x08000000U
+#define RTC_ALRMBSSR_SS 0x00007FFFU
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R 0xFFFFFFFFU
+
+
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL 0x03U /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 0x01U /*!<Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 0x02U /*!<Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV 0x00FFU /*!<Clock divide factor */
+#define SDIO_CLKCR_CLKEN 0x0100U /*!<Clock enable bit */
+#define SDIO_CLKCR_PWRSAV 0x0200U /*!<Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS 0x0400U /*!<Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS 0x1800U /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 0x0800U /*!<Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 0x1000U /*!<Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE 0x2000U /*!<SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN 0x4000U /*!<HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG 0xFFFFFFFFU /*!<Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX 0x003FU /*!<Command Index */
+
+#define SDIO_CMD_WAITRESP 0x00C0U /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 0x0040U /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 0x0080U /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT 0x0100U /*!<CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND 0x0200U /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN 0x0400U /*!<Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND 0x0800U /*!<SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL 0x1000U /*!<Enable CMD completion */
+#define SDIO_CMD_NIEN 0x2000U /*!<Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD 0x4000U /*!<CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD 0x3FU /*!<Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME 0xFFFFFFFFU /*!<Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH 0x01FFFFFFU /*!<Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN 0x0001U /*!<Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR 0x0002U /*!<Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE 0x0004U /*!<Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN 0x0008U /*!<DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE 0x00F0U /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 0x0010U /*!<Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 0x0020U /*!<Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 0x0040U /*!<Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 0x0080U /*!<Bit 3 */
+
+#define SDIO_DCTRL_RWSTART 0x0100U /*!<Read wait start */
+#define SDIO_DCTRL_RWSTOP 0x0200U /*!<Read wait stop */
+#define SDIO_DCTRL_RWMOD 0x0400U /*!<Read wait mode */
+#define SDIO_DCTRL_SDIOEN 0x0800U /*!<SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT 0x01FFFFFFU /*!<Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL 0x00000001U /*!<Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL 0x00000002U /*!<Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT 0x00000004U /*!<Command response timeout */
+#define SDIO_STA_DTIMEOUT 0x00000008U /*!<Data timeout */
+#define SDIO_STA_TXUNDERR 0x00000010U /*!<Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR 0x00000020U /*!<Received FIFO overrun error */
+#define SDIO_STA_CMDREND 0x00000040U /*!<Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT 0x00000080U /*!<Command sent (no response required) */
+#define SDIO_STA_DATAEND 0x00000100U /*!<Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR 0x00000200U /*!<Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND 0x00000400U /*!<Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT 0x00000800U /*!<Command transfer in progress */
+#define SDIO_STA_TXACT 0x00001000U /*!<Data transmit in progress */
+#define SDIO_STA_RXACT 0x00002000U /*!<Data receive in progress */
+#define SDIO_STA_TXFIFOHE 0x00004000U /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF 0x00008000U /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF 0x00010000U /*!<Transmit FIFO full */
+#define SDIO_STA_RXFIFOF 0x00020000U /*!<Receive FIFO full */
+#define SDIO_STA_TXFIFOE 0x00040000U /*!<Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE 0x00080000U /*!<Receive FIFO empty */
+#define SDIO_STA_TXDAVL 0x00100000U /*!<Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL 0x00200000U /*!<Data available in receive FIFO */
+#define SDIO_STA_SDIOIT 0x00400000U /*!<SDIO interrupt received */
+#define SDIO_STA_CEATAEND 0x00800000U /*!<CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC 0x00000001U /*!<CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC 0x00000002U /*!<DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC 0x00000004U /*!<CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC 0x00000008U /*!<DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC 0x00000010U /*!<TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC 0x00000020U /*!<RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC 0x00000040U /*!<CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC 0x00000080U /*!<CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC 0x00000100U /*!<DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC 0x00000200U /*!<STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC 0x00000400U /*!<DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC 0x00400000U /*!<SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC 0x00800000U /*!<CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE 0x00000001U /*!<Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE 0x00000002U /*!<Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE 0x00000004U /*!<Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE 0x00000008U /*!<Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE 0x00000010U /*!<Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE 0x00000020U /*!<Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE 0x00000040U /*!<Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE 0x00000080U /*!<Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE 0x00000100U /*!<Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE 0x00000200U /*!<Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE 0x00000400U /*!<Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE 0x00000800U /*!<CCommand Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE 0x00001000U /*!<Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE 0x00002000U /*!<Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE 0x00004000U /*!<Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE 0x00008000U /*!<Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE 0x00010000U /*!<Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE 0x00020000U /*!<Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE 0x00040000U /*!<Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE 0x00080000U /*!<Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE 0x00100000U /*!<Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE 0x00200000U /*!<Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE 0x00400000U /*!<SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE 0x00800000U /*!<CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT 0x00FFFFFFU /*!<Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA 0xFFFFFFFFU /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA 0x00000001U /*!<Clock Phase */
+#define SPI_CR1_CPOL 0x00000002U /*!<Clock Polarity */
+#define SPI_CR1_MSTR 0x00000004U /*!<Master Selection */
+
+#define SPI_CR1_BR 0x00000038U /*!<BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 0x00000008U /*!<Bit 0 */
+#define SPI_CR1_BR_1 0x00000010U /*!<Bit 1 */
+#define SPI_CR1_BR_2 0x00000020U /*!<Bit 2 */
+
+#define SPI_CR1_SPE 0x00000040U /*!<SPI Enable */
+#define SPI_CR1_LSBFIRST 0x00000080U /*!<Frame Format */
+#define SPI_CR1_SSI 0x00000100U /*!<Internal slave select */
+#define SPI_CR1_SSM 0x00000200U /*!<Software slave management */
+#define SPI_CR1_RXONLY 0x00000400U /*!<Receive only */
+#define SPI_CR1_DFF 0x00000800U /*!<Data Frame Format */
+#define SPI_CR1_CRCNEXT 0x00001000U /*!<Transmit CRC next */
+#define SPI_CR1_CRCEN 0x00002000U /*!<Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE 0x00004000U /*!<Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE 0x00008000U /*!<Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN 0x00000001U /*!<Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN 0x00000002U /*!<Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE 0x00000004U /*!<SS Output Enable */
+#define SPI_CR2_FRF 0x00000010U /*!<Frame Format */
+#define SPI_CR2_ERRIE 0x00000020U /*!<Error Interrupt Enable */
+#define SPI_CR2_RXNEIE 0x00000040U /*!<RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE 0x00000080U /*!<Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE 0x00000001U /*!<Receive buffer Not Empty */
+#define SPI_SR_TXE 0x00000002U /*!<Transmit buffer Empty */
+#define SPI_SR_CHSIDE 0x00000004U /*!<Channel side */
+#define SPI_SR_UDR 0x00000008U /*!<Underrun flag */
+#define SPI_SR_CRCERR 0x00000010U /*!<CRC Error flag */
+#define SPI_SR_MODF 0x00000020U /*!<Mode fault */
+#define SPI_SR_OVR 0x00000040U /*!<Overrun flag */
+#define SPI_SR_BSY 0x00000080U /*!<Busy flag */
+#define SPI_SR_FRE 0x00000100U /*!<Frame format error flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR 0x0000FFFFU /*!<Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY 0x0000FFFFU /*!<CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC 0x0000FFFFU /*!<Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC 0x0000FFFFU /*!<Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN 0x00000001U /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN 0x00000006U /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 0x00000002U /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 0x00000004U /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL 0x00000008U /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD 0x00000030U /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 0x00000010U /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 0x00000020U /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC 0x00000080U /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG 0x00000300U /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 0x00000100U /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 0x00000200U /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE 0x00000400U /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD 0x00000800U /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV 0x000000FFU /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD 0x00000100U /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE 0x00000200U /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* SYSCFG */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SYSCFG_MEMRMP register ***************/
+#define SYSCFG_MEMRMP_MEM_MODE 0x00000007U /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 0x00000001U
+#define SYSCFG_MEMRMP_MEM_MODE_1 0x00000002U
+#define SYSCFG_MEMRMP_MEM_MODE_2 0x00000004U
+
+/****************** Bit definition for SYSCFG_PMC register ******************/
+#define SYSCFG_PMC_ADC1DC2 0x00010000U /*!< Refer to AN4073 on how to use this bit */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 0x000FU /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 0x00F0U /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 0x0F00U /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 0xF000U /*!<EXTI 3 configuration */
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA 0x0000U /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB 0x0001U /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC 0x0002U /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD 0x0003U /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE 0x0004U /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH 0x0007U /*!<PH[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA 0x0000U /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB 0x0010U /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC 0x0020U /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD 0x0030U /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE 0x0040U /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH 0x0070U /*!<PH[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA 0x0000U /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB 0x0100U /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC 0x0200U /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD 0x0300U /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE 0x0400U /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH 0x0700U /*!<PH[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA 0x0000U /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB 0x1000U /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC 0x2000U /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD 0x3000U /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE 0x4000U /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH 0x7000U /*!<PH[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 0x000FU /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 0x00F0U /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 0x0F00U /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 0xF000U /*!<EXTI 7 configuration */
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA 0x0000U /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB 0x0001U /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC 0x0002U /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD 0x0003U /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE 0x0004U /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH 0x0007U /*!<PH[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA 0x0000U /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB 0x0010U /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC 0x0020U /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD 0x0030U /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE 0x0040U /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH 0x0070U /*!<PH[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA 0x0000U /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB 0x0100U /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC 0x0200U /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD 0x0300U /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE 0x0400U /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH 0x0700U /*!<PH[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA 0x0000U /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB 0x1000U /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC 0x2000U /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD 0x3000U /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE 0x4000U /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH 0x7000U /*!<PH[7] pin */
+
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 0x000FU /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 0x00F0U /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 0x0F00U /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 0xF000U /*!<EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA 0x0000U /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB 0x0001U /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC 0x0002U /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD 0x0003U /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE 0x0004U /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH 0x0007U /*!<PH[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA 0x0000U /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB 0x0010U /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC 0x0020U /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD 0x0030U /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE 0x0040U /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH 0x0070U /*!<PH[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA 0x0000U /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB 0x0100U /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC 0x0200U /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD 0x0300U /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE 0x0400U /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH 0x0700U /*!<PH[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA 0x0000U /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB 0x1000U /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC 0x2000U /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD 0x3000U /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE 0x4000U /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH 0x7000U /*!<PH[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register ***************/
+#define SYSCFG_EXTICR4_EXTI12 0x000FU /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 0x00F0U /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 0x0F00U /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 0xF000U /*!<EXTI 15 configuration */
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA 0x0000U /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB 0x0001U /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC 0x0002U /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD 0x0003U /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE 0x0004U /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH 0x0007U /*!<PH[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA 0x0000U /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB 0x0010U /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC 0x0020U /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD 0x0030U /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE 0x0040U /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH 0x0070U /*!<PH[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA 0x0000U /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB 0x0100U /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC 0x0200U /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD 0x0300U /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE 0x0400U /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH 0x0700U /*!<PH[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA 0x0000U /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB 0x1000U /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC 0x2000U /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD 0x3000U /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE 0x4000U /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH 0x7000U /*!<PH[15] pin */
+
+/****************** Bit definition for SYSCFG_CMPCR register ****************/
+#define SYSCFG_CMPCR_CMP_PD 0x00000001U /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY 0x00000100U /*!<Compensation cell power-down */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN 0x0001U /*!<Counter enable */
+#define TIM_CR1_UDIS 0x0002U /*!<Update disable */
+#define TIM_CR1_URS 0x0004U /*!<Update request source */
+#define TIM_CR1_OPM 0x0008U /*!<One pulse mode */
+#define TIM_CR1_DIR 0x0010U /*!<Direction */
+
+#define TIM_CR1_CMS 0x0060U /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 0x0020U /*!<Bit 0 */
+#define TIM_CR1_CMS_1 0x0040U /*!<Bit 1 */
+
+#define TIM_CR1_ARPE 0x0080U /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD 0x0300U /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 0x0100U /*!<Bit 0 */
+#define TIM_CR1_CKD_1 0x0200U /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC 0x0001U /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS 0x0004U /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS 0x0008U /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS 0x0070U /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 0x0010U /*!<Bit 0 */
+#define TIM_CR2_MMS_1 0x0020U /*!<Bit 1 */
+#define TIM_CR2_MMS_2 0x0040U /*!<Bit 2 */
+
+#define TIM_CR2_TI1S 0x0080U /*!<TI1 Selection */
+#define TIM_CR2_OIS1 0x0100U /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N 0x0200U /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 0x0400U /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N 0x0800U /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 0x1000U /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N 0x2000U /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 0x4000U /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS 0x0007U /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 0x0001U /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 0x0002U /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 0x0004U /*!<Bit 2 */
+
+#define TIM_SMCR_TS 0x0070U /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 0x0010U /*!<Bit 0 */
+#define TIM_SMCR_TS_1 0x0020U /*!<Bit 1 */
+#define TIM_SMCR_TS_2 0x0040U /*!<Bit 2 */
+
+#define TIM_SMCR_MSM 0x0080U /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF 0x0F00U /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 0x0100U /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 0x0200U /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 0x0400U /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 0x0800U /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS 0x3000U /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 0x1000U /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 0x2000U /*!<Bit 1 */
+
+#define TIM_SMCR_ECE 0x4000U /*!<External clock enable */
+#define TIM_SMCR_ETP 0x8000U /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE 0x0001U /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE 0x0002U /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE 0x0004U /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE 0x0008U /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE 0x0010U /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE 0x0020U /*!<COM interrupt enable */
+#define TIM_DIER_TIE 0x0040U /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE 0x0080U /*!<Break interrupt enable */
+#define TIM_DIER_UDE 0x0100U /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE 0x0200U /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE 0x0400U /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE 0x0800U /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE 0x1000U /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE 0x2000U /*!<COM DMA request enable */
+#define TIM_DIER_TDE 0x4000U /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF 0x0001U /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF 0x0002U /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF 0x0004U /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF 0x0008U /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF 0x0010U /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF 0x0020U /*!<COM interrupt Flag */
+#define TIM_SR_TIF 0x0040U /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF 0x0080U /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF 0x0200U /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF 0x0400U /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF 0x0800U /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF 0x1000U /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG 0x01U /*!<Update Generation */
+#define TIM_EGR_CC1G 0x02U /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G 0x04U /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G 0x08U /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G 0x10U /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG 0x20U /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG 0x40U /*!<Trigger Generation */
+#define TIM_EGR_BG 0x80U /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S 0x0003U /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 0x0001U /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 0x0002U /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE 0x0004U /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE 0x0008U /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M 0x0070U /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 0x0040U /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE 0x0080U /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S 0x0300U /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 0x0100U /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 0x0200U /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE 0x0400U /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE 0x0800U /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M 0x7000U /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 0x4000U /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE 0x8000U /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC 0x000CU /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 0x0004U /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 0x0008U /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F 0x00F0U /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 0x0040U /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 0x0080U /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC 0x0C00U /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 0x0400U /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 0x0800U /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F 0xF000U /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 0x4000U /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 0x8000U /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S 0x0003U /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 0x0001U /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 0x0002U /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE 0x0004U /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE 0x0008U /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M 0x0070U /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 0x0040U /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE 0x0080U /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S 0x0300U /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 0x0100U /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 0x0200U /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE 0x0400U /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE 0x0800U /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M 0x7000U /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 0x4000U /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE 0x8000U /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC 0x000CU /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 0x0004U /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 0x0008U /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F 0x00F0U /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 0x0040U /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 0x0080U /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC 0x0C00U /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 0x0400U /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 0x0800U /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F 0xF000U /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 0x4000U /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 0x8000U /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E 0x0001U /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P 0x0002U /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE 0x0004U /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP 0x0008U /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E 0x0010U /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P 0x0020U /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE 0x0040U /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP 0x0080U /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E 0x0100U /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P 0x0200U /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE 0x0400U /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP 0x0800U /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E 0x1000U /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P 0x2000U /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP 0x8000U /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT 0xFFFFU /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC 0xFFFFU /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR 0xFFFFU /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP 0xFFU /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 0xFFFFU /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 0xFFFFU /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 0xFFFFU /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 0xFFFFU /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG 0x00FFU /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 0x0001U /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 0x0002U /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 0x0004U /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 0x0008U /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 0x0010U /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 0x0020U /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 0x0040U /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 0x0080U /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK 0x0300U /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 0x0100U /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 0x0200U /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI 0x0400U /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR 0x0800U /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE 0x1000U /*!<Break enable */
+#define TIM_BDTR_BKP 0x2000U /*!<Break Polarity */
+#define TIM_BDTR_AOE 0x4000U /*!<Automatic Output enable */
+#define TIM_BDTR_MOE 0x8000U /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA 0x001FU /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 0x0001U /*!<Bit 0 */
+#define TIM_DCR_DBA_1 0x0002U /*!<Bit 1 */
+#define TIM_DCR_DBA_2 0x0004U /*!<Bit 2 */
+#define TIM_DCR_DBA_3 0x0008U /*!<Bit 3 */
+#define TIM_DCR_DBA_4 0x0010U /*!<Bit 4 */
+
+#define TIM_DCR_DBL 0x1F00U /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 0x0100U /*!<Bit 0 */
+#define TIM_DCR_DBL_1 0x0200U /*!<Bit 1 */
+#define TIM_DCR_DBL_2 0x0400U /*!<Bit 2 */
+#define TIM_DCR_DBL_3 0x0800U /*!<Bit 3 */
+#define TIM_DCR_DBL_4 0x1000U /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB 0xFFFFU /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI4_RMP 0x00C0U /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap) */
+#define TIM_OR_TI4_RMP_0 0x0040U /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1 0x0080U /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP 0x0C00U /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0 0x0400U /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1 0x0800U /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE 0x0001U /*!<Parity Error */
+#define USART_SR_FE 0x0002U /*!<Framing Error */
+#define USART_SR_NE 0x0004U /*!<Noise Error Flag */
+#define USART_SR_ORE 0x0008U /*!<OverRun Error */
+#define USART_SR_IDLE 0x0010U /*!<IDLE line detected */
+#define USART_SR_RXNE 0x0020U /*!<Read Data Register Not Empty */
+#define USART_SR_TC 0x0040U /*!<Transmission Complete */
+#define USART_SR_TXE 0x0080U /*!<Transmit Data Register Empty */
+#define USART_SR_LBD 0x0100U /*!<LIN Break Detection Flag */
+#define USART_SR_CTS 0x0200U /*!<CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR 0x01FFU /*!<Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction 0x000FU /*!<Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa 0xFFF0U /*!<Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK 0x0001U /*!<Send Break */
+#define USART_CR1_RWU 0x0002U /*!<Receiver wakeup */
+#define USART_CR1_RE 0x0004U /*!<Receiver Enable */
+#define USART_CR1_TE 0x0008U /*!<Transmitter Enable */
+#define USART_CR1_IDLEIE 0x0010U /*!<IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE 0x0020U /*!<RXNE Interrupt Enable */
+#define USART_CR1_TCIE 0x0040U /*!<Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE 0x0080U /*!<PE Interrupt Enable */
+#define USART_CR1_PEIE 0x0100U /*!<PE Interrupt Enable */
+#define USART_CR1_PS 0x0200U /*!<Parity Selection */
+#define USART_CR1_PCE 0x0400U /*!<Parity Control Enable */
+#define USART_CR1_WAKE 0x0800U /*!<Wakeup method */
+#define USART_CR1_M 0x1000U /*!<Word length */
+#define USART_CR1_UE 0x2000U /*!<USART Enable */
+#define USART_CR1_OVER8 0x8000U /*!<USART Oversampling by 8 enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD 0x000FU /*!<Address of the USART node */
+#define USART_CR2_LBDL 0x0020U /*!<LIN Break Detection Length */
+#define USART_CR2_LBDIE 0x0040U /*!<LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL 0x0100U /*!<Last Bit Clock pulse */
+#define USART_CR2_CPHA 0x0200U /*!<Clock Phase */
+#define USART_CR2_CPOL 0x0400U /*!<Clock Polarity */
+#define USART_CR2_CLKEN 0x0800U /*!<Clock Enable */
+
+#define USART_CR2_STOP 0x3000U /*!<STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 0x1000U /*!<Bit 0 */
+#define USART_CR2_STOP_1 0x2000U /*!<Bit 1 */
+
+#define USART_CR2_LINEN 0x4000U /*!<LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE 0x0001U /*!<Error Interrupt Enable */
+#define USART_CR3_IREN 0x0002U /*!<IrDA mode Enable */
+#define USART_CR3_IRLP 0x0004U /*!<IrDA Low-Power */
+#define USART_CR3_HDSEL 0x0008U /*!<Half-Duplex Selection */
+#define USART_CR3_NACK 0x0010U /*!<Smartcard NACK enable */
+#define USART_CR3_SCEN 0x0020U /*!<Smartcard mode enable */
+#define USART_CR3_DMAR 0x0040U /*!<DMA Enable Receiver */
+#define USART_CR3_DMAT 0x0080U /*!<DMA Enable Transmitter */
+#define USART_CR3_RTSE 0x0100U /*!<RTS Enable */
+#define USART_CR3_CTSE 0x0200U /*!<CTS Enable */
+#define USART_CR3_CTSIE 0x0400U /*!<CTS Interrupt Enable */
+#define USART_CR3_ONEBIT 0x0800U /*!<USART One bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC 0x00FFU /*!<PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 0x0001U /*!<Bit 0 */
+#define USART_GTPR_PSC_1 0x0002U /*!<Bit 1 */
+#define USART_GTPR_PSC_2 0x0004U /*!<Bit 2 */
+#define USART_GTPR_PSC_3 0x0008U /*!<Bit 3 */
+#define USART_GTPR_PSC_4 0x0010U /*!<Bit 4 */
+#define USART_GTPR_PSC_5 0x0020U /*!<Bit 5 */
+#define USART_GTPR_PSC_6 0x0040U /*!<Bit 6 */
+#define USART_GTPR_PSC_7 0x0080U /*!<Bit 7 */
+
+#define USART_GTPR_GT 0xFF00U /*!<Guard time value */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T 0x7FU /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T_0 0x01U /*!<Bit 0 */
+#define WWDG_CR_T_1 0x02U /*!<Bit 1 */
+#define WWDG_CR_T_2 0x04U /*!<Bit 2 */
+#define WWDG_CR_T_3 0x08U /*!<Bit 3 */
+#define WWDG_CR_T_4 0x10U /*!<Bit 4 */
+#define WWDG_CR_T_5 0x20U /*!<Bit 5 */
+#define WWDG_CR_T_6 0x40U /*!<Bit 6 */
+/* Legacy defines */
+#define WWDG_CR_T0 WWDG_CR_T_0
+#define WWDG_CR_T1 WWDG_CR_T_1
+#define WWDG_CR_T2 WWDG_CR_T_2
+#define WWDG_CR_T3 WWDG_CR_T_3
+#define WWDG_CR_T4 WWDG_CR_T_4
+#define WWDG_CR_T5 WWDG_CR_T_5
+#define WWDG_CR_T6 WWDG_CR_T_6
+
+#define WWDG_CR_WDGA 0x80U /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W 0x007FU /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W_0 0x0001U /*!<Bit 0 */
+#define WWDG_CFR_W_1 0x0002U /*!<Bit 1 */
+#define WWDG_CFR_W_2 0x0004U /*!<Bit 2 */
+#define WWDG_CFR_W_3 0x0008U /*!<Bit 3 */
+#define WWDG_CFR_W_4 0x0010U /*!<Bit 4 */
+#define WWDG_CFR_W_5 0x0020U /*!<Bit 5 */
+#define WWDG_CFR_W_6 0x0040U /*!<Bit 6 */
+/* Legacy defines */
+#define WWDG_CFR_W0 WWDG_CFR_W_0
+#define WWDG_CFR_W1 WWDG_CFR_W_1
+#define WWDG_CFR_W2 WWDG_CFR_W_2
+#define WWDG_CFR_W3 WWDG_CFR_W_3
+#define WWDG_CFR_W4 WWDG_CFR_W_4
+#define WWDG_CFR_W5 WWDG_CFR_W_5
+#define WWDG_CFR_W6 WWDG_CFR_W_6
+
+#define WWDG_CFR_WDGTB 0x0180U /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB_0 0x0080U /*!<Bit 0 */
+#define WWDG_CFR_WDGTB_1 0x0100U /*!<Bit 1 */
+/* Legacy defines */
+#define WWDG_CFR_WDGTB0 WWDG_CFR_WDGTB_0
+#define WWDG_CFR_WDGTB1 WWDG_CFR_WDGTB_1
+
+#define WWDG_CFR_EWI 0x0200U /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF 0x01U /*!<Early Wakeup Interrupt Flag */
+
+
+/******************************************************************************/
+/* */
+/* DBG */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID 0x00000FFFU
+#define DBGMCU_IDCODE_REV_ID 0xFFFF0000U
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP 0x00000001U
+#define DBGMCU_CR_DBG_STOP 0x00000002U
+#define DBGMCU_CR_DBG_STANDBY 0x00000004U
+#define DBGMCU_CR_TRACE_IOEN 0x00000020U
+
+#define DBGMCU_CR_TRACE_MODE 0x000000C0U
+#define DBGMCU_CR_TRACE_MODE_0 0x00000040U/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 0x00000080U/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP 0x00000001U
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP 0x00000002U
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP 0x00000004U
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP 0x00000008U
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP 0x00000010U
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP 0x00000020U
+#define DBGMCU_APB1_FZ_DBG_TIM12_STOP 0x00000040U
+#define DBGMCU_APB1_FZ_DBG_TIM13_STOP 0x00000080U
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP 0x00000100U
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP 0x00000400U
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP 0x00000800U
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP 0x00001000U
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT 0x00200000U
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT 0x00400000U
+#define DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT 0x00800000U
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP 0x02000000U
+#define DBGMCU_APB1_FZ_DBG_CAN2_STOP 0x04000000U
+/* Old IWDGSTOP bit definition, maintained for legacy purpose */
+#define DBGMCU_APB1_FZ_DBG_IWDEG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP 0x00000001U
+#define DBGMCU_APB2_FZ_DBG_TIM8_STOP 0x00000002U
+#define DBGMCU_APB2_FZ_DBG_TIM9_STOP 0x00010000U
+#define DBGMCU_APB2_FZ_DBG_TIM10_STOP 0x00020000U
+#define DBGMCU_APB2_FZ_DBG_TIM11_STOP 0x00040000U
+
+/******************************************************************************/
+/* */
+/* USB_OTG */
+/* */
+/******************************************************************************/
+/******************** Bit definition forUSB_OTG_GOTGCTL register ********************/
+#define USB_OTG_GOTGCTL_SRQSCS 0x00000001U /*!< Session request success */
+#define USB_OTG_GOTGCTL_SRQ 0x00000002U /*!< Session request */
+#define USB_OTG_GOTGCTL_HNGSCS 0x00000100U /*!< Host negotiation success */
+#define USB_OTG_GOTGCTL_HNPRQ 0x00000200U /*!< HNP request */
+#define USB_OTG_GOTGCTL_HSHNPEN 0x00000400U /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_DHNPEN 0x00000800U /*!< Device HNP enabled */
+#define USB_OTG_GOTGCTL_CIDSTS 0x00010000U /*!< Connector ID status */
+#define USB_OTG_GOTGCTL_DBCT 0x00020000U /*!< Long/short debounce time */
+#define USB_OTG_GOTGCTL_ASVLD 0x00040000U /*!< A-session valid */
+#define USB_OTG_GOTGCTL_BSVLD 0x00080000U /*!< B-session valid */
+
+/******************** Bit definition forUSB_OTG_HCFG register ********************/
+
+#define USB_OTG_HCFG_FSLSPCS 0x00000003U /*!< FS/LS PHY clock select */
+#define USB_OTG_HCFG_FSLSPCS_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_HCFG_FSLSPCS_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_HCFG_FSLSS 0x00000004U /*!< FS- and LS-only support */
+
+/******************** Bit definition forUSB_OTG_DCFG register ********************/
+
+#define USB_OTG_DCFG_DSPD 0x00000003U /*!< Device speed */
+#define USB_OTG_DCFG_DSPD_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_DCFG_DSPD_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_DCFG_NZLSOHSK 0x00000004U /*!< Nonzero-length status OUT handshake */
+
+#define USB_OTG_DCFG_DAD 0x000007F0U /*!< Device address */
+#define USB_OTG_DCFG_DAD_0 0x00000010U /*!<Bit 0 */
+#define USB_OTG_DCFG_DAD_1 0x00000020U /*!<Bit 1 */
+#define USB_OTG_DCFG_DAD_2 0x00000040U /*!<Bit 2 */
+#define USB_OTG_DCFG_DAD_3 0x00000080U /*!<Bit 3 */
+#define USB_OTG_DCFG_DAD_4 0x00000100U /*!<Bit 4 */
+#define USB_OTG_DCFG_DAD_5 0x00000200U /*!<Bit 5 */
+#define USB_OTG_DCFG_DAD_6 0x00000400U /*!<Bit 6 */
+
+#define USB_OTG_DCFG_PFIVL 0x00001800U /*!< Periodic (micro)frame interval */
+#define USB_OTG_DCFG_PFIVL_0 0x00000800U /*!<Bit 0 */
+#define USB_OTG_DCFG_PFIVL_1 0x00001000U /*!<Bit 1 */
+
+#define USB_OTG_DCFG_PERSCHIVL 0x03000000U /*!< Periodic scheduling interval */
+#define USB_OTG_DCFG_PERSCHIVL_0 0x01000000U /*!<Bit 0 */
+#define USB_OTG_DCFG_PERSCHIVL_1 0x02000000U /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_PCGCR register ********************/
+#define USB_OTG_PCGCR_STPPCLK 0x00000001U /*!< Stop PHY clock */
+#define USB_OTG_PCGCR_GATEHCLK 0x00000002U /*!< Gate HCLK */
+#define USB_OTG_PCGCR_PHYSUSP 0x00000010U /*!< PHY suspended */
+
+/******************** Bit definition forUSB_OTG_GOTGINT register ********************/
+#define USB_OTG_GOTGINT_SEDET 0x00000004U /*!< Session end detected */
+#define USB_OTG_GOTGINT_SRSSCHG 0x00000100U /*!< Session request success status change */
+#define USB_OTG_GOTGINT_HNSSCHG 0x00000200U /*!< Host negotiation success status change */
+#define USB_OTG_GOTGINT_HNGDET 0x00020000U /*!< Host negotiation detected */
+#define USB_OTG_GOTGINT_ADTOCHG 0x00040000U /*!< A-device timeout change */
+#define USB_OTG_GOTGINT_DBCDNE 0x00080000U /*!< Debounce done */
+
+/******************** Bit definition forUSB_OTG_DCTL register ********************/
+#define USB_OTG_DCTL_RWUSIG 0x00000001U /*!< Remote wakeup signaling */
+#define USB_OTG_DCTL_SDIS 0x00000002U /*!< Soft disconnect */
+#define USB_OTG_DCTL_GINSTS 0x00000004U /*!< Global IN NAK status */
+#define USB_OTG_DCTL_GONSTS 0x00000008U /*!< Global OUT NAK status */
+
+#define USB_OTG_DCTL_TCTL 0x00000070U /*!< Test control */
+#define USB_OTG_DCTL_TCTL_0 0x00000010U /*!<Bit 0 */
+#define USB_OTG_DCTL_TCTL_1 0x00000020U /*!<Bit 1 */
+#define USB_OTG_DCTL_TCTL_2 0x00000040U /*!<Bit 2 */
+#define USB_OTG_DCTL_SGINAK 0x00000080U /*!< Set global IN NAK */
+#define USB_OTG_DCTL_CGINAK 0x00000100U /*!< Clear global IN NAK */
+#define USB_OTG_DCTL_SGONAK 0x00000200U /*!< Set global OUT NAK */
+#define USB_OTG_DCTL_CGONAK 0x00000400U /*!< Clear global OUT NAK */
+#define USB_OTG_DCTL_POPRGDNE 0x00000800U /*!< Power-on programming done */
+
+/******************** Bit definition forUSB_OTG_HFIR register ********************/
+#define USB_OTG_HFIR_FRIVL 0x0000FFFFU /*!< Frame interval */
+
+/******************** Bit definition forUSB_OTG_HFNUM register ********************/
+#define USB_OTG_HFNUM_FRNUM 0x0000FFFFU /*!< Frame number */
+#define USB_OTG_HFNUM_FTREM 0xFFFF0000U /*!< Frame time remaining */
+
+/******************** Bit definition forUSB_OTG_DSTS register ********************/
+#define USB_OTG_DSTS_SUSPSTS 0x00000001U /*!< Suspend status */
+
+#define USB_OTG_DSTS_ENUMSPD 0x00000006U /*!< Enumerated speed */
+#define USB_OTG_DSTS_ENUMSPD_0 0x00000002U /*!<Bit 0 */
+#define USB_OTG_DSTS_ENUMSPD_1 0x00000004U /*!<Bit 1 */
+#define USB_OTG_DSTS_EERR 0x00000008U /*!< Erratic error */
+#define USB_OTG_DSTS_FNSOF 0x003FFF00U /*!< Frame number of the received SOF */
+
+/******************** Bit definition forUSB_OTG_GAHBCFG register ********************/
+#define USB_OTG_GAHBCFG_GINT 0x00000001U /*!< Global interrupt mask */
+
+#define USB_OTG_GAHBCFG_HBSTLEN 0x0000001EU /*!< Burst length/type */
+#define USB_OTG_GAHBCFG_HBSTLEN_0 0x00000002U /*!<Bit 0 */
+#define USB_OTG_GAHBCFG_HBSTLEN_1 0x00000004U /*!<Bit 1 */
+#define USB_OTG_GAHBCFG_HBSTLEN_2 0x00000008U /*!<Bit 2 */
+#define USB_OTG_GAHBCFG_HBSTLEN_3 0x00000010U /*!<Bit 3 */
+#define USB_OTG_GAHBCFG_DMAEN 0x00000020U /*!< DMA enable */
+#define USB_OTG_GAHBCFG_TXFELVL 0x00000080U /*!< TxFIFO empty level */
+#define USB_OTG_GAHBCFG_PTXFELVL 0x00000100U /*!< Periodic TxFIFO empty level */
+
+/******************** Bit definition forUSB_OTG_GUSBCFG register ********************/
+
+#define USB_OTG_GUSBCFG_TOCAL 0x00000007U /*!< FS timeout calibration */
+#define USB_OTG_GUSBCFG_TOCAL_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TOCAL_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TOCAL_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_PHYSEL 0x00000040U /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
+#define USB_OTG_GUSBCFG_SRPCAP 0x00000100U /*!< SRP-capable */
+#define USB_OTG_GUSBCFG_HNPCAP 0x00000200U /*!< HNP-capable */
+
+#define USB_OTG_GUSBCFG_TRDT 0x00003C00U /*!< USB turnaround time */
+#define USB_OTG_GUSBCFG_TRDT_0 0x00000400U /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TRDT_1 0x00000800U /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TRDT_2 0x00001000U /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_TRDT_3 0x00002000U /*!<Bit 3 */
+#define USB_OTG_GUSBCFG_PHYLPCS 0x00008000U /*!< PHY Low-power clock select */
+#define USB_OTG_GUSBCFG_ULPIFSLS 0x00020000U /*!< ULPI FS/LS select */
+#define USB_OTG_GUSBCFG_ULPIAR 0x00040000U /*!< ULPI Auto-resume */
+#define USB_OTG_GUSBCFG_ULPICSM 0x00080000U /*!< ULPI Clock SuspendM */
+#define USB_OTG_GUSBCFG_ULPIEVBUSD 0x00100000U /*!< ULPI External VBUS Drive */
+#define USB_OTG_GUSBCFG_ULPIEVBUSI 0x00200000U /*!< ULPI external VBUS indicator */
+#define USB_OTG_GUSBCFG_TSDPS 0x00400000U /*!< TermSel DLine pulsing selection */
+#define USB_OTG_GUSBCFG_PCCI 0x00800000U /*!< Indicator complement */
+#define USB_OTG_GUSBCFG_PTCI 0x01000000U /*!< Indicator pass through */
+#define USB_OTG_GUSBCFG_ULPIIPD 0x02000000U /*!< ULPI interface protect disable */
+#define USB_OTG_GUSBCFG_FHMOD 0x20000000U /*!< Forced host mode */
+#define USB_OTG_GUSBCFG_FDMOD 0x40000000U /*!< Forced peripheral mode */
+#define USB_OTG_GUSBCFG_CTXPKT 0x80000000U /*!< Corrupt Tx packet */
+
+/******************** Bit definition forUSB_OTG_GRSTCTL register ********************/
+#define USB_OTG_GRSTCTL_CSRST 0x00000001U /*!< Core soft reset */
+#define USB_OTG_GRSTCTL_HSRST 0x00000002U /*!< HCLK soft reset */
+#define USB_OTG_GRSTCTL_FCRST 0x00000004U /*!< Host frame counter reset */
+#define USB_OTG_GRSTCTL_RXFFLSH 0x00000010U /*!< RxFIFO flush */
+#define USB_OTG_GRSTCTL_TXFFLSH 0x00000020U /*!< TxFIFO flush */
+
+#define USB_OTG_GRSTCTL_TXFNUM 0x000007C0U /*!< TxFIFO number */
+#define USB_OTG_GRSTCTL_TXFNUM_0 0x00000040U /*!<Bit 0 */
+#define USB_OTG_GRSTCTL_TXFNUM_1 0x00000080U /*!<Bit 1 */
+#define USB_OTG_GRSTCTL_TXFNUM_2 0x00000100U /*!<Bit 2 */
+#define USB_OTG_GRSTCTL_TXFNUM_3 0x00000200U /*!<Bit 3 */
+#define USB_OTG_GRSTCTL_TXFNUM_4 0x00000400U /*!<Bit 4 */
+#define USB_OTG_GRSTCTL_DMAREQ 0x40000000U /*!< DMA request signal */
+#define USB_OTG_GRSTCTL_AHBIDL 0x80000000U /*!< AHB master idle */
+
+/******************** Bit definition forUSB_OTG_DIEPMSK register ********************/
+#define USB_OTG_DIEPMSK_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPMSK_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPMSK_TOM 0x00000008U /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPMSK_ITTXFEMSK 0x00000010U /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPMSK_INEPNMM 0x00000020U /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPMSK_INEPNEM 0x00000040U /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPMSK_TXFURM 0x00000100U /*!< FIFO underrun mask */
+#define USB_OTG_DIEPMSK_BIM 0x00000200U /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXSTS register ********************/
+#define USB_OTG_HPTXSTS_PTXFSAVL 0x0000FFFFU /*!< Periodic transmit data FIFO space available */
+
+#define USB_OTG_HPTXSTS_PTXQSAV 0x00FF0000U /*!< Periodic transmit request queue space available */
+#define USB_OTG_HPTXSTS_PTXQSAV_0 0x00010000U /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQSAV_1 0x00020000U /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQSAV_2 0x00040000U /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQSAV_3 0x00080000U /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQSAV_4 0x00100000U /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQSAV_5 0x00200000U /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQSAV_6 0x00400000U /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQSAV_7 0x00800000U /*!<Bit 7 */
+
+#define USB_OTG_HPTXSTS_PTXQTOP 0xFF000000U /*!< Top of the periodic transmit request queue */
+#define USB_OTG_HPTXSTS_PTXQTOP_0 0x01000000U /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQTOP_1 0x02000000U /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQTOP_2 0x04000000U /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQTOP_3 0x08000000U /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQTOP_4 0x10000000U /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQTOP_5 0x20000000U /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQTOP_6 0x40000000U /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQTOP_7 0x80000000U /*!<Bit 7 */
+
+/******************** Bit definition forUSB_OTG_HAINT register ********************/
+#define USB_OTG_HAINT_HAINT 0x0000FFFFU /*!< Channel interrupts */
+
+/******************** Bit definition forUSB_OTG_DOEPMSK register ********************/
+#define USB_OTG_DOEPMSK_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPMSK_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPMSK_STUPM 0x00000008U /*!< SETUP phase done mask */
+#define USB_OTG_DOEPMSK_OTEPDM 0x00000010U /*!< OUT token received when endpoint disabled mask */
+#define USB_OTG_DOEPMSK_B2BSTUP 0x00000040U /*!< Back-to-back SETUP packets received mask */
+#define USB_OTG_DOEPMSK_OPEM 0x00000100U /*!< OUT packet error mask */
+#define USB_OTG_DOEPMSK_BOIM 0x00000200U /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_GINTSTS register ********************/
+#define USB_OTG_GINTSTS_CMOD 0x00000001U /*!< Current mode of operation */
+#define USB_OTG_GINTSTS_MMIS 0x00000002U /*!< Mode mismatch interrupt */
+#define USB_OTG_GINTSTS_OTGINT 0x00000004U /*!< OTG interrupt */
+#define USB_OTG_GINTSTS_SOF 0x00000008U /*!< Start of frame */
+#define USB_OTG_GINTSTS_RXFLVL 0x00000010U /*!< RxFIFO nonempty */
+#define USB_OTG_GINTSTS_NPTXFE 0x00000020U /*!< Nonperiodic TxFIFO empty */
+#define USB_OTG_GINTSTS_GINAKEFF 0x00000040U /*!< Global IN nonperiodic NAK effective */
+#define USB_OTG_GINTSTS_BOUTNAKEFF 0x00000080U /*!< Global OUT NAK effective */
+#define USB_OTG_GINTSTS_ESUSP 0x00000400U /*!< Early suspend */
+#define USB_OTG_GINTSTS_USBSUSP 0x00000800U /*!< USB suspend */
+#define USB_OTG_GINTSTS_USBRST 0x00001000U /*!< USB reset */
+#define USB_OTG_GINTSTS_ENUMDNE 0x00002000U /*!< Enumeration done */
+#define USB_OTG_GINTSTS_ISOODRP 0x00004000U /*!< Isochronous OUT packet dropped interrupt */
+#define USB_OTG_GINTSTS_EOPF 0x00008000U /*!< End of periodic frame interrupt */
+#define USB_OTG_GINTSTS_IEPINT 0x00040000U /*!< IN endpoint interrupt */
+#define USB_OTG_GINTSTS_OEPINT 0x00080000U /*!< OUT endpoint interrupt */
+#define USB_OTG_GINTSTS_IISOIXFR 0x00100000U /*!< Incomplete isochronous IN transfer */
+#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT 0x00200000U /*!< Incomplete periodic transfer */
+#define USB_OTG_GINTSTS_DATAFSUSP 0x00400000U /*!< Data fetch suspended */
+#define USB_OTG_GINTSTS_HPRTINT 0x01000000U /*!< Host port interrupt */
+#define USB_OTG_GINTSTS_HCINT 0x02000000U /*!< Host channels interrupt */
+#define USB_OTG_GINTSTS_PTXFE 0x04000000U /*!< Periodic TxFIFO empty */
+#define USB_OTG_GINTSTS_CIDSCHG 0x10000000U /*!< Connector ID status change */
+#define USB_OTG_GINTSTS_DISCINT 0x20000000U /*!< Disconnect detected interrupt */
+#define USB_OTG_GINTSTS_SRQINT 0x40000000U /*!< Session request/new session detected interrupt */
+#define USB_OTG_GINTSTS_WKUINT 0x80000000U /*!< Resume/remote wakeup detected interrupt */
+
+/******************** Bit definition forUSB_OTG_GINTMSK register ********************/
+#define USB_OTG_GINTMSK_MMISM 0x00000002U /*!< Mode mismatch interrupt mask */
+#define USB_OTG_GINTMSK_OTGINT 0x00000004U /*!< OTG interrupt mask */
+#define USB_OTG_GINTMSK_SOFM 0x00000008U /*!< Start of frame mask */
+#define USB_OTG_GINTMSK_RXFLVLM 0x00000010U /*!< Receive FIFO nonempty mask */
+#define USB_OTG_GINTMSK_NPTXFEM 0x00000020U /*!< Nonperiodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_GINAKEFFM 0x00000040U /*!< Global nonperiodic IN NAK effective mask */
+#define USB_OTG_GINTMSK_GONAKEFFM 0x00000080U /*!< Global OUT NAK effective mask */
+#define USB_OTG_GINTMSK_ESUSPM 0x00000400U /*!< Early suspend mask */
+#define USB_OTG_GINTMSK_USBSUSPM 0x00000800U /*!< USB suspend mask */
+#define USB_OTG_GINTMSK_USBRST 0x00001000U /*!< USB reset mask */
+#define USB_OTG_GINTMSK_ENUMDNEM 0x00002000U /*!< Enumeration done mask */
+#define USB_OTG_GINTMSK_ISOODRPM 0x00004000U /*!< Isochronous OUT packet dropped interrupt mask */
+#define USB_OTG_GINTMSK_EOPFM 0x00008000U /*!< End of periodic frame interrupt mask */
+#define USB_OTG_GINTMSK_EPMISM 0x00020000U /*!< Endpoint mismatch interrupt mask */
+#define USB_OTG_GINTMSK_IEPINT 0x00040000U /*!< IN endpoints interrupt mask */
+#define USB_OTG_GINTMSK_OEPINT 0x00080000U /*!< OUT endpoints interrupt mask */
+#define USB_OTG_GINTMSK_IISOIXFRM 0x00100000U /*!< Incomplete isochronous IN transfer mask */
+#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM 0x00200000U /*!< Incomplete periodic transfer mask */
+#define USB_OTG_GINTMSK_FSUSPM 0x00400000U /*!< Data fetch suspended mask */
+#define USB_OTG_GINTMSK_PRTIM 0x01000000U /*!< Host port interrupt mask */
+#define USB_OTG_GINTMSK_HCIM 0x02000000U /*!< Host channels interrupt mask */
+#define USB_OTG_GINTMSK_PTXFEM 0x04000000U /*!< Periodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_CIDSCHGM 0x10000000U /*!< Connector ID status change mask */
+#define USB_OTG_GINTMSK_DISCINT 0x20000000U /*!< Disconnect detected interrupt mask */
+#define USB_OTG_GINTMSK_SRQIM 0x40000000U /*!< Session request/new session detected interrupt mask */
+#define USB_OTG_GINTMSK_WUIM 0x80000000U /*!< Resume/remote wakeup detected interrupt mask */
+
+/******************** Bit definition forUSB_OTG_DAINT register ********************/
+#define USB_OTG_DAINT_IEPINT 0x0000FFFFU /*!< IN endpoint interrupt bits */
+#define USB_OTG_DAINT_OEPINT 0xFFFF0000U /*!< OUT endpoint interrupt bits */
+
+/******************** Bit definition forUSB_OTG_HAINTMSK register ********************/
+#define USB_OTG_HAINTMSK_HAINTM 0x0000FFFFU /*!< Channel interrupt mask */
+
+/******************** Bit definition for USB_OTG_GRXSTSP register ********************/
+#define USB_OTG_GRXSTSP_EPNUM 0x0000000FU /*!< IN EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_BCNT 0x00007FF0U /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_DPID 0x00018000U /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_PKTSTS 0x001E0000U /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DAINTMSK register ********************/
+#define USB_OTG_DAINTMSK_IEPM 0x0000FFFFU /*!< IN EP interrupt mask bits */
+#define USB_OTG_DAINTMSK_OEPM 0xFFFF0000U /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM 0x0000000FU /*!< Channel number */
+#define USB_OTG_CHNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 0x00000008U /*!<Bit 3 */
+#define USB_OTG_BCNT 0x00007FF0U /*!< Byte count */
+
+#define USB_OTG_DPID 0x00018000U /*!< Data PID */
+#define USB_OTG_DPID_0 0x00008000U /*!<Bit 0 */
+#define USB_OTG_DPID_1 0x00010000U /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS 0x001E0000U /*!< Packet status */
+#define USB_OTG_PKTSTS_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 0x00040000U /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 0x00080000U /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 0x00100000U /*!<Bit 3 */
+
+#define USB_OTG_EPNUM 0x0000000FU /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 0x00000008U /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM 0x01E00000U /*!< Frame number */
+#define USB_OTG_FRMNUM_0 0x00200000U /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 0x00400000U /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 0x00800000U /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 0x01000000U /*!<Bit 3 */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM 0x0000000FU /*!< Channel number */
+#define USB_OTG_CHNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 0x00000008U /*!<Bit 3 */
+#define USB_OTG_BCNT 0x00007FF0U /*!< Byte count */
+
+#define USB_OTG_DPID 0x00018000U /*!< Data PID */
+#define USB_OTG_DPID_0 0x00008000U /*!<Bit 0 */
+#define USB_OTG_DPID_1 0x00010000U /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS 0x001E0000U /*!< Packet status */
+#define USB_OTG_PKTSTS_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 0x00040000U /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 0x00080000U /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 0x00100000U /*!<Bit 3 */
+
+#define USB_OTG_EPNUM 0x0000000FU /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 0x00000008U /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM 0x01E00000U /*!< Frame number */
+#define USB_OTG_FRMNUM_0 0x00200000U /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 0x00400000U /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 0x00800000U /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 0x01000000U /*!<Bit 3 */
+
+/******************** Bit definition forUSB_OTG_GRXFSIZ register ********************/
+#define USB_OTG_GRXFSIZ_RXFD 0x0000FFFFU /*!< RxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSDIS register ********************/
+#define USB_OTG_DVBUSDIS_VBUSDT 0x0000FFFFU /*!< Device VBUS discharge time */
+
+/******************** Bit definition for OTG register ********************/
+#define USB_OTG_NPTXFSA 0x0000FFFFU /*!< Nonperiodic transmit RAM start address */
+#define USB_OTG_NPTXFD 0xFFFF0000U /*!< Nonperiodic TxFIFO depth */
+#define USB_OTG_TX0FSA 0x0000FFFFU /*!< Endpoint 0 transmit RAM start address */
+#define USB_OTG_TX0FD 0xFFFF0000U /*!< Endpoint 0 TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSPULSE register ********************/
+#define USB_OTG_DVBUSPULSE_DVBUSP 0x00000FFFU /*!< Device VBUS pulsing time */
+
+/******************** Bit definition forUSB_OTG_GNPTXSTS register ********************/
+#define USB_OTG_GNPTXSTS_NPTXFSAV 0x0000FFFFU /*!< Nonperiodic TxFIFO space available */
+
+#define USB_OTG_GNPTXSTS_NPTQXSAV 0x00FF0000U /*!< Nonperiodic transmit request queue space available */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_0 0x00010000U /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_1 0x00020000U /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_2 0x00040000U /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_3 0x00080000U /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_4 0x00100000U /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_5 0x00200000U /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_6 0x00400000U /*!<Bit 6 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_7 0x00800000U /*!<Bit 7 */
+
+#define USB_OTG_GNPTXSTS_NPTXQTOP 0x7F000000U /*!< Top of the nonperiodic transmit request queue */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_0 0x01000000U /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_1 0x02000000U /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_2 0x04000000U /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_3 0x08000000U /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_4 0x10000000U /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_5 0x20000000U /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_6 0x40000000U /*!<Bit 6 */
+
+/******************** Bit definition forUSB_OTG_DTHRCTL register ********************/
+#define USB_OTG_DTHRCTL_NONISOTHREN 0x00000001U /*!< Nonisochronous IN endpoints threshold enable */
+#define USB_OTG_DTHRCTL_ISOTHREN 0x00000002U /*!< ISO IN endpoint threshold enable */
+
+#define USB_OTG_DTHRCTL_TXTHRLEN 0x000007FCU /*!< Transmit threshold length */
+#define USB_OTG_DTHRCTL_TXTHRLEN_0 0x00000004U /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_1 0x00000008U /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_2 0x00000010U /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_3 0x00000020U /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_4 0x00000040U /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_5 0x00000080U /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_6 0x00000100U /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_7 0x00000200U /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_8 0x00000400U /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_RXTHREN 0x00010000U /*!< Receive threshold enable */
+
+#define USB_OTG_DTHRCTL_RXTHRLEN 0x03FE0000U /*!< Receive threshold length */
+#define USB_OTG_DTHRCTL_RXTHRLEN_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_1 0x00040000U /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_2 0x00080000U /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_3 0x00100000U /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_4 0x00200000U /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_5 0x00400000U /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_6 0x00800000U /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_7 0x01000000U /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_8 0x02000000U /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_ARPEN 0x08000000U /*!< Arbiter parking enable */
+
+/******************** Bit definition forUSB_OTG_DIEPEMPMSK register ********************/
+#define USB_OTG_DIEPEMPMSK_INEPTXFEM 0x0000FFFFU /*!< IN EP Tx FIFO empty interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DEACHINT register ********************/
+#define USB_OTG_DEACHINT_IEP1INT 0x00000002U /*!< IN endpoint 1interrupt bit */
+#define USB_OTG_DEACHINT_OEP1INT 0x00020000U /*!< OUT endpoint 1 interrupt bit */
+
+/******************** Bit definition forUSB_OTG_GCCFG register ********************/
+#define USB_OTG_GCCFG_PWRDWN 0x00010000U /*!< Power down */
+#define USB_OTG_GCCFG_I2CPADEN 0x00020000U /*!< Enable I2C bus connection for the external I2C PHY interface */
+#define USB_OTG_GCCFG_VBUSASEN 0x00040000U /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_VBUSBSEN 0x00080000U /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_SOFOUTEN 0x00100000U /*!< SOF output enable */
+#define USB_OTG_GCCFG_NOVBUSSENS 0x00200000U /*!< VBUS sensing disable option */
+
+/******************** Bit definition forUSB_OTG_DEACHINTMSK register ********************/
+#define USB_OTG_DEACHINTMSK_IEP1INTM 0x00000002U /*!< IN Endpoint 1 interrupt mask bit */
+#define USB_OTG_DEACHINTMSK_OEP1INTM 0x00020000U /*!< OUT Endpoint 1 interrupt mask bit */
+
+/******************** Bit definition forUSB_OTG_CID register ********************/
+#define USB_OTG_CID_PRODUCT_ID 0xFFFFFFFFU /*!< Product ID field */
+
+/******************** Bit definition forUSB_OTG_DIEPEACHMSK1 register ********************/
+#define USB_OTG_DIEPEACHMSK1_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_TOM 0x00000008U /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK 0x00000010U /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNMM 0x00000020U /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNEM 0x00000040U /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPEACHMSK1_TXFURM 0x00000100U /*!< FIFO underrun mask */
+#define USB_OTG_DIEPEACHMSK1_BIM 0x00000200U /*!< BNA interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_NAKM 0x00002000U /*!< NAK interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPRT register ********************/
+#define USB_OTG_HPRT_PCSTS 0x00000001U /*!< Port connect status */
+#define USB_OTG_HPRT_PCDET 0x00000002U /*!< Port connect detected */
+#define USB_OTG_HPRT_PENA 0x00000004U /*!< Port enable */
+#define USB_OTG_HPRT_PENCHNG 0x00000008U /*!< Port enable/disable change */
+#define USB_OTG_HPRT_POCA 0x00000010U /*!< Port overcurrent active */
+#define USB_OTG_HPRT_POCCHNG 0x00000020U /*!< Port overcurrent change */
+#define USB_OTG_HPRT_PRES 0x00000040U /*!< Port resume */
+#define USB_OTG_HPRT_PSUSP 0x00000080U /*!< Port suspend */
+#define USB_OTG_HPRT_PRST 0x00000100U /*!< Port reset */
+
+#define USB_OTG_HPRT_PLSTS 0x00000C00U /*!< Port line status */
+#define USB_OTG_HPRT_PLSTS_0 0x00000400U /*!<Bit 0 */
+#define USB_OTG_HPRT_PLSTS_1 0x00000800U /*!<Bit 1 */
+#define USB_OTG_HPRT_PPWR 0x00001000U /*!< Port power */
+
+#define USB_OTG_HPRT_PTCTL 0x0001E000U /*!< Port test control */
+#define USB_OTG_HPRT_PTCTL_0 0x00002000U /*!<Bit 0 */
+#define USB_OTG_HPRT_PTCTL_1 0x00004000U /*!<Bit 1 */
+#define USB_OTG_HPRT_PTCTL_2 0x00008000U /*!<Bit 2 */
+#define USB_OTG_HPRT_PTCTL_3 0x00010000U /*!<Bit 3 */
+
+#define USB_OTG_HPRT_PSPD 0x00060000U /*!< Port speed */
+#define USB_OTG_HPRT_PSPD_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_HPRT_PSPD_1 0x00040000U /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DOEPEACHMSK1 register ********************/
+#define USB_OTG_DOEPEACHMSK1_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_TOM 0x00000008U /*!< Timeout condition mask */
+#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK 0x00000010U /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNMM 0x00000020U /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNEM 0x00000040U /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DOEPEACHMSK1_TXFURM 0x00000100U /*!< OUT packet error mask */
+#define USB_OTG_DOEPEACHMSK1_BIM 0x00000200U /*!< BNA interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_BERRM 0x00001000U /*!< Bubble error interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NAKM 0x00002000U /*!< NAK interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NYETM 0x00004000U /*!< NYET interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXFSIZ register ********************/
+#define USB_OTG_HPTXFSIZ_PTXSA 0x0000FFFFU /*!< Host periodic TxFIFO start address */
+#define USB_OTG_HPTXFSIZ_PTXFD 0xFFFF0000U /*!< Host periodic TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DIEPCTL register ********************/
+#define USB_OTG_DIEPCTL_MPSIZ 0x000007FFU /*!< Maximum packet size */
+#define USB_OTG_DIEPCTL_USBAEP 0x00008000U /*!< USB active endpoint */
+#define USB_OTG_DIEPCTL_EONUM_DPID 0x00010000U /*!< Even/odd frame */
+#define USB_OTG_DIEPCTL_NAKSTS 0x00020000U /*!< NAK status */
+
+#define USB_OTG_DIEPCTL_EPTYP 0x000C0000U /*!< Endpoint type */
+#define USB_OTG_DIEPCTL_EPTYP_0 0x00040000U /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_EPTYP_1 0x00080000U /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_STALL 0x00200000U /*!< STALL handshake */
+
+#define USB_OTG_DIEPCTL_TXFNUM 0x03C00000U /*!< TxFIFO number */
+#define USB_OTG_DIEPCTL_TXFNUM_0 0x00400000U /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_TXFNUM_1 0x00800000U /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_TXFNUM_2 0x01000000U /*!<Bit 2 */
+#define USB_OTG_DIEPCTL_TXFNUM_3 0x02000000U /*!<Bit 3 */
+#define USB_OTG_DIEPCTL_CNAK 0x04000000U /*!< Clear NAK */
+#define USB_OTG_DIEPCTL_SNAK 0x08000000U /*!< Set NAK */
+#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM 0x10000000U /*!< Set DATA0 PID */
+#define USB_OTG_DIEPCTL_SODDFRM 0x20000000U /*!< Set odd frame */
+#define USB_OTG_DIEPCTL_EPDIS 0x40000000U /*!< Endpoint disable */
+#define USB_OTG_DIEPCTL_EPENA 0x80000000U /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_HCCHAR register ********************/
+#define USB_OTG_HCCHAR_MPSIZ 0x000007FFU /*!< Maximum packet size */
+
+#define USB_OTG_HCCHAR_EPNUM 0x00007800U /*!< Endpoint number */
+#define USB_OTG_HCCHAR_EPNUM_0 0x00000800U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPNUM_1 0x00001000U /*!<Bit 1 */
+#define USB_OTG_HCCHAR_EPNUM_2 0x00002000U /*!<Bit 2 */
+#define USB_OTG_HCCHAR_EPNUM_3 0x00004000U /*!<Bit 3 */
+#define USB_OTG_HCCHAR_EPDIR 0x00008000U /*!< Endpoint direction */
+#define USB_OTG_HCCHAR_LSDEV 0x00020000U /*!< Low-speed device */
+
+#define USB_OTG_HCCHAR_EPTYP 0x000C0000U /*!< Endpoint type */
+#define USB_OTG_HCCHAR_EPTYP_0 0x00040000U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPTYP_1 0x00080000U /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_MC 0x00300000U /*!< Multi Count (MC) / Error Count (EC) */
+#define USB_OTG_HCCHAR_MC_0 0x00100000U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_MC_1 0x00200000U /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_DAD 0x1FC00000U /*!< Device address */
+#define USB_OTG_HCCHAR_DAD_0 0x00400000U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_DAD_1 0x00800000U /*!<Bit 1 */
+#define USB_OTG_HCCHAR_DAD_2 0x01000000U /*!<Bit 2 */
+#define USB_OTG_HCCHAR_DAD_3 0x02000000U /*!<Bit 3 */
+#define USB_OTG_HCCHAR_DAD_4 0x04000000U /*!<Bit 4 */
+#define USB_OTG_HCCHAR_DAD_5 0x08000000U /*!<Bit 5 */
+#define USB_OTG_HCCHAR_DAD_6 0x10000000U /*!<Bit 6 */
+#define USB_OTG_HCCHAR_ODDFRM 0x20000000U /*!< Odd frame */
+#define USB_OTG_HCCHAR_CHDIS 0x40000000U /*!< Channel disable */
+#define USB_OTG_HCCHAR_CHENA 0x80000000U /*!< Channel enable */
+
+/******************** Bit definition forUSB_OTG_HCSPLT register ********************/
+
+#define USB_OTG_HCSPLT_PRTADDR 0x0000007FU /*!< Port address */
+#define USB_OTG_HCSPLT_PRTADDR_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_HCSPLT_PRTADDR_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_HCSPLT_PRTADDR_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_HCSPLT_PRTADDR_3 0x00000008U /*!<Bit 3 */
+#define USB_OTG_HCSPLT_PRTADDR_4 0x00000010U /*!<Bit 4 */
+#define USB_OTG_HCSPLT_PRTADDR_5 0x00000020U /*!<Bit 5 */
+#define USB_OTG_HCSPLT_PRTADDR_6 0x00000040U /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_HUBADDR 0x00003F80U /*!< Hub address */
+#define USB_OTG_HCSPLT_HUBADDR_0 0x00000080U /*!<Bit 0 */
+#define USB_OTG_HCSPLT_HUBADDR_1 0x00000100U /*!<Bit 1 */
+#define USB_OTG_HCSPLT_HUBADDR_2 0x00000200U /*!<Bit 2 */
+#define USB_OTG_HCSPLT_HUBADDR_3 0x00000400U /*!<Bit 3 */
+#define USB_OTG_HCSPLT_HUBADDR_4 0x00000800U /*!<Bit 4 */
+#define USB_OTG_HCSPLT_HUBADDR_5 0x00001000U /*!<Bit 5 */
+#define USB_OTG_HCSPLT_HUBADDR_6 0x00002000U /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_XACTPOS 0x0000C000U /*!< XACTPOS */
+#define USB_OTG_HCSPLT_XACTPOS_0 0x00004000U /*!<Bit 0 */
+#define USB_OTG_HCSPLT_XACTPOS_1 0x00008000U /*!<Bit 1 */
+#define USB_OTG_HCSPLT_COMPLSPLT 0x00010000U /*!< Do complete split */
+#define USB_OTG_HCSPLT_SPLITEN 0x80000000U /*!< Split enable */
+
+/******************** Bit definition forUSB_OTG_HCINT register ********************/
+#define USB_OTG_HCINT_XFRC 0x00000001U /*!< Transfer completed */
+#define USB_OTG_HCINT_CHH 0x00000002U /*!< Channel halted */
+#define USB_OTG_HCINT_AHBERR 0x00000004U /*!< AHB error */
+#define USB_OTG_HCINT_STALL 0x00000008U /*!< STALL response received interrupt */
+#define USB_OTG_HCINT_NAK 0x00000010U /*!< NAK response received interrupt */
+#define USB_OTG_HCINT_ACK 0x00000020U /*!< ACK response received/transmitted interrupt */
+#define USB_OTG_HCINT_NYET 0x00000040U /*!< Response received interrupt */
+#define USB_OTG_HCINT_TXERR 0x00000080U /*!< Transaction error */
+#define USB_OTG_HCINT_BBERR 0x00000100U /*!< Babble error */
+#define USB_OTG_HCINT_FRMOR 0x00000200U /*!< Frame overrun */
+#define USB_OTG_HCINT_DTERR 0x00000400U /*!< Data toggle error */
+
+/******************** Bit definition forUSB_OTG_DIEPINT register ********************/
+#define USB_OTG_DIEPINT_XFRC 0x00000001U /*!< Transfer completed interrupt */
+#define USB_OTG_DIEPINT_EPDISD 0x00000002U /*!< Endpoint disabled interrupt */
+#define USB_OTG_DIEPINT_TOC 0x00000008U /*!< Timeout condition */
+#define USB_OTG_DIEPINT_ITTXFE 0x00000010U /*!< IN token received when TxFIFO is empty */
+#define USB_OTG_DIEPINT_INEPNE 0x00000040U /*!< IN endpoint NAK effective */
+#define USB_OTG_DIEPINT_TXFE 0x00000080U /*!< Transmit FIFO empty */
+#define USB_OTG_DIEPINT_TXFIFOUDRN 0x00000100U /*!< Transmit Fifo Underrun */
+#define USB_OTG_DIEPINT_BNA 0x00000200U /*!< Buffer not available interrupt */
+#define USB_OTG_DIEPINT_PKTDRPSTS 0x00000800U /*!< Packet dropped status */
+#define USB_OTG_DIEPINT_BERR 0x00001000U /*!< Babble error interrupt */
+#define USB_OTG_DIEPINT_NAK 0x00002000U /*!< NAK interrupt */
+
+/******************** Bit definition forUSB_OTG_HCINTMSK register ********************/
+#define USB_OTG_HCINTMSK_XFRCM 0x00000001U /*!< Transfer completed mask */
+#define USB_OTG_HCINTMSK_CHHM 0x00000002U /*!< Channel halted mask */
+#define USB_OTG_HCINTMSK_AHBERR 0x00000004U /*!< AHB error */
+#define USB_OTG_HCINTMSK_STALLM 0x00000008U /*!< STALL response received interrupt mask */
+#define USB_OTG_HCINTMSK_NAKM 0x00000010U /*!< NAK response received interrupt mask */
+#define USB_OTG_HCINTMSK_ACKM 0x00000020U /*!< ACK response received/transmitted interrupt mask */
+#define USB_OTG_HCINTMSK_NYET 0x00000040U /*!< response received interrupt mask */
+#define USB_OTG_HCINTMSK_TXERRM 0x00000080U /*!< Transaction error mask */
+#define USB_OTG_HCINTMSK_BBERRM 0x00000100U /*!< Babble error mask */
+#define USB_OTG_HCINTMSK_FRMORM 0x00000200U /*!< Frame overrun mask */
+#define USB_OTG_HCINTMSK_DTERRM 0x00000400U /*!< Data toggle error mask */
+
+/******************** Bit definition for USB_OTG_DIEPTSIZ register ********************/
+
+#define USB_OTG_DIEPTSIZ_XFRSIZ 0x0007FFFFU /*!< Transfer size */
+#define USB_OTG_DIEPTSIZ_PKTCNT 0x1FF80000U /*!< Packet count */
+#define USB_OTG_DIEPTSIZ_MULCNT 0x60000000U /*!< Packet count */
+/******************** Bit definition forUSB_OTG_HCTSIZ register ********************/
+#define USB_OTG_HCTSIZ_XFRSIZ 0x0007FFFFU /*!< Transfer size */
+#define USB_OTG_HCTSIZ_PKTCNT 0x1FF80000U /*!< Packet count */
+#define USB_OTG_HCTSIZ_DOPING 0x80000000U /*!< Do PING */
+#define USB_OTG_HCTSIZ_DPID 0x60000000U /*!< Data PID */
+#define USB_OTG_HCTSIZ_DPID_0 0x20000000U /*!<Bit 0 */
+#define USB_OTG_HCTSIZ_DPID_1 0x40000000U /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DIEPDMA register ********************/
+#define USB_OTG_DIEPDMA_DMAADDR 0xFFFFFFFFU /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_HCDMA register ********************/
+#define USB_OTG_HCDMA_DMAADDR 0xFFFFFFFFU /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_DTXFSTS register ********************/
+#define USB_OTG_DTXFSTS_INEPTFSAV 0x0000FFFFU /*!< IN endpoint TxFIFO space avail */
+
+/******************** Bit definition forUSB_OTG_DIEPTXF register ********************/
+#define USB_OTG_DIEPTXF_INEPTXSA 0x0000FFFFU /*!< IN endpoint FIFOx transmit RAM start address */
+#define USB_OTG_DIEPTXF_INEPTXFD 0xFFFF0000U /*!< IN endpoint TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DOEPCTL register ********************/
+
+#define USB_OTG_DOEPCTL_MPSIZ 0x000007FFU /*!< Maximum packet size */ /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_USBAEP 0x00008000U /*!< USB active endpoint */
+#define USB_OTG_DOEPCTL_NAKSTS 0x00020000U /*!< NAK status */
+#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM 0x10000000U /*!< Set DATA0 PID */
+#define USB_OTG_DOEPCTL_SODDFRM 0x20000000U /*!< Set odd frame */
+#define USB_OTG_DOEPCTL_EPTYP 0x000C0000U /*!< Endpoint type */
+#define USB_OTG_DOEPCTL_EPTYP_0 0x00040000U /*!<Bit 0 */
+#define USB_OTG_DOEPCTL_EPTYP_1 0x00080000U /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_SNPM 0x00100000U /*!< Snoop mode */
+#define USB_OTG_DOEPCTL_STALL 0x00200000U /*!< STALL handshake */
+#define USB_OTG_DOEPCTL_CNAK 0x04000000U /*!< Clear NAK */
+#define USB_OTG_DOEPCTL_SNAK 0x08000000U /*!< Set NAK */
+#define USB_OTG_DOEPCTL_EPDIS 0x40000000U /*!< Endpoint disable */
+#define USB_OTG_DOEPCTL_EPENA 0x80000000U /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_DOEPINT register ********************/
+#define USB_OTG_DOEPINT_XFRC 0x00000001U /*!< Transfer completed interrupt */
+#define USB_OTG_DOEPINT_EPDISD 0x00000002U /*!< Endpoint disabled interrupt */
+#define USB_OTG_DOEPINT_STUP 0x00000008U /*!< SETUP phase done */
+#define USB_OTG_DOEPINT_OTEPDIS 0x00000010U /*!< OUT token received when endpoint disabled */
+#define USB_OTG_DOEPINT_B2BSTUP 0x00000040U /*!< Back-to-back SETUP packets received */
+#define USB_OTG_DOEPINT_NYET 0x00004000U /*!< NYET interrupt */
+
+/******************** Bit definition forUSB_OTG_DOEPTSIZ register ********************/
+
+#define USB_OTG_DOEPTSIZ_XFRSIZ 0x0007FFFFU /*!< Transfer size */
+#define USB_OTG_DOEPTSIZ_PKTCNT 0x1FF80000U /*!< Packet count */
+
+#define USB_OTG_DOEPTSIZ_STUPCNT 0x60000000U /*!< SETUP packet count */
+#define USB_OTG_DOEPTSIZ_STUPCNT_0 0x20000000U /*!<Bit 0 */
+#define USB_OTG_DOEPTSIZ_STUPCNT_1 0x40000000U /*!<Bit 1 */
+
+/******************** Bit definition for PCGCCTL register ********************/
+#define USB_OTG_PCGCCTL_STOPCLK 0x00000001U /*!< SETUP packet count */
+#define USB_OTG_PCGCCTL_GATECLK 0x00000002U /*!<Bit 0 */
+#define USB_OTG_PCGCCTL_PHYSUSP 0x00000010U /*!<Bit 1 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Stream0) || \
+ ((INSTANCE) == DMA1_Stream1) || \
+ ((INSTANCE) == DMA1_Stream2) || \
+ ((INSTANCE) == DMA1_Stream3) || \
+ ((INSTANCE) == DMA1_Stream4) || \
+ ((INSTANCE) == DMA1_Stream5) || \
+ ((INSTANCE) == DMA1_Stream6) || \
+ ((INSTANCE) == DMA1_Stream7) || \
+ ((INSTANCE) == DMA2_Stream0) || \
+ ((INSTANCE) == DMA2_Stream1) || \
+ ((INSTANCE) == DMA2_Stream2) || \
+ ((INSTANCE) == DMA2_Stream3) || \
+ ((INSTANCE) == DMA2_Stream4) || \
+ ((INSTANCE) == DMA2_Stream5) || \
+ ((INSTANCE) == DMA2_Stream6) || \
+ ((INSTANCE) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOH))
+
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2) || \
+ ((INSTANCE) == I2C3))
+
+/******************************** I2S Instances *******************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3))
+
+/*************************** I2S Extended Instances ***************************/
+#define IS_I2S_ALL_INSTANCE_EXT(PERIPH) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4))
+
+/*************************** SPI Extended Instances ***************************/
+#define IS_SPI_ALL_INSTANCE_EXT(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) ((INSTANCE) == TIM1)
+
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5))
+
+/***************** TIM Instances : external trigger input availabe ************/
+#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM4) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM5) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM9) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM10) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM11) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/*********************** PCD Instances ****************************************/
+#define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+
+/*********************** HCD Instances ****************************************/
+#define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/****************************** SDIO Instances ********************************/
+#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO)
+
+/****************************** USB Exported Constants ************************/
+#define USB_OTG_FS_HOST_MAX_CHANNEL_NBR 8U
+#define USB_OTG_FS_MAX_IN_ENDPOINTS 4U /* Including EP0 */
+#define USB_OTG_FS_MAX_OUT_ENDPOINTS 4U /* Including EP0 */
+#define USB_OTG_FS_TOTAL_FIFO_SIZE 1280U /* in Bytes */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F401xC_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f401xe.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f401xe.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,4807 @@
+/**
+ ******************************************************************************
+ * @file stm32f401xe.h
+ * @author MCD Application Team
+ * @version V2.5.0
+ * @date 22-April-2016
+ * @brief CMSIS STM32F401xExx Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - peripherals registers declarations and bits definition
+ * - Macros to access peripheral's registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f401xe
+ * @{
+ */
+
+#ifndef __STM32F401xE_H
+#define __STM32F401xE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+#ifndef __FPU_PRESENT
+#define __FPU_PRESENT 1U /*!< FPU present */
+#endif /* __FPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ SPI4_IRQn = 84 /*!< SPI4 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+ uint32_t RESERVED7[1]; /*!< Reserved, 0x88 */
+ __IO uint32_t DCKCFGR; /*!< RCC DCKCFGR configuration register, Address offset: 0x8C */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /* !< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE 0x08000000U /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE 0x20000000U /*!< SRAM1(96 KB) base address in the alias region */
+#define PERIPH_BASE 0x40000000U /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE 0x40024000U /*!< Backup SRAM(4 KB) base address in the alias region */
+#define SRAM1_BB_BASE 0x22000000U /*!< SRAM1(96 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE 0x42000000U /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE 0x42480000U /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END 0x0807FFFFU /*!< FLASH end address */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000U)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000U)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000U)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000U)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400U)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800U)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00U)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800U)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00U)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000U)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400U)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800U)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00U)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000U)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400U)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400U)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800U)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00U)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000U)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000U)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000U)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400U)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000U)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300U)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00U)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000U)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400U)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800U)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00U)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000U)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400U)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800U)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000U)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400U)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800U)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00U)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000U)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00U)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000U)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800U)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00U)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000U)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010U)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028U)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040U)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058U)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070U)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088U)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0U)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8U)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400U)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010U)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028U)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040U)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058U)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070U)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088U)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0U)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8U)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE 0xE0042000U
+
+/*!< USB registers base address */
+#define USB_OTG_FS_PERIPH_BASE 0x50000000U
+
+#define USB_OTG_GLOBAL_BASE 0x000U
+#define USB_OTG_DEVICE_BASE 0x800U
+#define USB_OTG_IN_ENDPOINT_BASE 0x900U
+#define USB_OTG_OUT_ENDPOINT_BASE 0xB00U
+#define USB_OTG_EP_REG_SIZE 0x20U
+#define USB_OTG_HOST_BASE 0x400U
+#define USB_OTG_HOST_PORT_BASE 0x440U
+#define USB_OTG_HOST_CHANNEL_BASE 0x500U
+#define USB_OTG_HOST_CHANNEL_SIZE 0x20U
+#define USB_OTG_PCGCCTL_BASE 0xE00U
+#define USB_OTG_FIFO_BASE 0x1000U
+#define USB_OTG_FIFO_SIZE 0x1000U
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD 0x00000001U /*!<Analog watchdog flag */
+#define ADC_SR_EOC 0x00000002U /*!<End of conversion */
+#define ADC_SR_JEOC 0x00000004U /*!<Injected channel end of conversion */
+#define ADC_SR_JSTRT 0x00000008U /*!<Injected channel Start flag */
+#define ADC_SR_STRT 0x00000010U /*!<Regular channel Start flag */
+#define ADC_SR_OVR 0x00000020U /*!<Overrun flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH 0x0000001FU /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 0x00000001U /*!<Bit 0 */
+#define ADC_CR1_AWDCH_1 0x00000002U /*!<Bit 1 */
+#define ADC_CR1_AWDCH_2 0x00000004U /*!<Bit 2 */
+#define ADC_CR1_AWDCH_3 0x00000008U /*!<Bit 3 */
+#define ADC_CR1_AWDCH_4 0x00000010U /*!<Bit 4 */
+#define ADC_CR1_EOCIE 0x00000020U /*!<Interrupt enable for EOC */
+#define ADC_CR1_AWDIE 0x00000040U /*!<AAnalog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE 0x00000080U /*!<Interrupt enable for injected channels */
+#define ADC_CR1_SCAN 0x00000100U /*!<Scan mode */
+#define ADC_CR1_AWDSGL 0x00000200U /*!<Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO 0x00000400U /*!<Automatic injected group conversion */
+#define ADC_CR1_DISCEN 0x00000800U /*!<Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN 0x00001000U /*!<Discontinuous mode on injected channels */
+#define ADC_CR1_DISCNUM 0x0000E000U /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 0x00002000U /*!<Bit 0 */
+#define ADC_CR1_DISCNUM_1 0x00004000U /*!<Bit 1 */
+#define ADC_CR1_DISCNUM_2 0x00008000U /*!<Bit 2 */
+#define ADC_CR1_JAWDEN 0x00400000U /*!<Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN 0x00800000U /*!<Analog watchdog enable on regular channels */
+#define ADC_CR1_RES 0x03000000U /*!<RES[2:0] bits (Resolution) */
+#define ADC_CR1_RES_0 0x01000000U /*!<Bit 0 */
+#define ADC_CR1_RES_1 0x02000000U /*!<Bit 1 */
+#define ADC_CR1_OVRIE 0x04000000U /*!<overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON 0x00000001U /*!<A/D Converter ON / OFF */
+#define ADC_CR2_CONT 0x00000002U /*!<Continuous Conversion */
+#define ADC_CR2_DMA 0x00000100U /*!<Direct Memory access mode */
+#define ADC_CR2_DDS 0x00000200U /*!<DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS 0x00000400U /*!<End of conversion selection */
+#define ADC_CR2_ALIGN 0x00000800U /*!<Data Alignment */
+#define ADC_CR2_JEXTSEL 0x000F0000U /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 0x00010000U /*!<Bit 0 */
+#define ADC_CR2_JEXTSEL_1 0x00020000U /*!<Bit 1 */
+#define ADC_CR2_JEXTSEL_2 0x00040000U /*!<Bit 2 */
+#define ADC_CR2_JEXTSEL_3 0x00080000U /*!<Bit 3 */
+#define ADC_CR2_JEXTEN 0x00300000U /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define ADC_CR2_JEXTEN_0 0x00100000U /*!<Bit 0 */
+#define ADC_CR2_JEXTEN_1 0x00200000U /*!<Bit 1 */
+#define ADC_CR2_JSWSTART 0x00400000U /*!<Start Conversion of injected channels */
+#define ADC_CR2_EXTSEL 0x0F000000U /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 0x01000000U /*!<Bit 0 */
+#define ADC_CR2_EXTSEL_1 0x02000000U /*!<Bit 1 */
+#define ADC_CR2_EXTSEL_2 0x04000000U /*!<Bit 2 */
+#define ADC_CR2_EXTSEL_3 0x08000000U /*!<Bit 3 */
+#define ADC_CR2_EXTEN 0x30000000U /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define ADC_CR2_EXTEN_0 0x10000000U /*!<Bit 0 */
+#define ADC_CR2_EXTEN_1 0x20000000U /*!<Bit 1 */
+#define ADC_CR2_SWSTART 0x40000000U /*!<Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 0x00000007U /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 0x00000001U /*!<Bit 0 */
+#define ADC_SMPR1_SMP10_1 0x00000002U /*!<Bit 1 */
+#define ADC_SMPR1_SMP10_2 0x00000004U /*!<Bit 2 */
+#define ADC_SMPR1_SMP11 0x00000038U /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 0x00000008U /*!<Bit 0 */
+#define ADC_SMPR1_SMP11_1 0x00000010U /*!<Bit 1 */
+#define ADC_SMPR1_SMP11_2 0x00000020U /*!<Bit 2 */
+#define ADC_SMPR1_SMP12 0x000001C0U /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 0x00000040U /*!<Bit 0 */
+#define ADC_SMPR1_SMP12_1 0x00000080U /*!<Bit 1 */
+#define ADC_SMPR1_SMP12_2 0x00000100U /*!<Bit 2 */
+#define ADC_SMPR1_SMP13 0x00000E00U /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 0x00000200U /*!<Bit 0 */
+#define ADC_SMPR1_SMP13_1 0x00000400U /*!<Bit 1 */
+#define ADC_SMPR1_SMP13_2 0x00000800U /*!<Bit 2 */
+#define ADC_SMPR1_SMP14 0x00007000U /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 0x00001000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP14_1 0x00002000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP14_2 0x00004000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP15 0x00038000U /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 0x00008000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP15_1 0x00010000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP15_2 0x00020000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP16 0x001C0000U /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 0x00040000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP16_1 0x00080000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP16_2 0x00100000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP17 0x00E00000U /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 0x00200000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP17_1 0x00400000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP17_2 0x00800000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP18 0x07000000U /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR1_SMP18_0 0x01000000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP18_1 0x02000000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP18_2 0x04000000U /*!<Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 0x00000007U /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 0x00000001U /*!<Bit 0 */
+#define ADC_SMPR2_SMP0_1 0x00000002U /*!<Bit 1 */
+#define ADC_SMPR2_SMP0_2 0x00000004U /*!<Bit 2 */
+#define ADC_SMPR2_SMP1 0x00000038U /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 0x00000008U /*!<Bit 0 */
+#define ADC_SMPR2_SMP1_1 0x00000010U /*!<Bit 1 */
+#define ADC_SMPR2_SMP1_2 0x00000020U /*!<Bit 2 */
+#define ADC_SMPR2_SMP2 0x000001C0U /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 0x00000040U /*!<Bit 0 */
+#define ADC_SMPR2_SMP2_1 0x00000080U /*!<Bit 1 */
+#define ADC_SMPR2_SMP2_2 0x00000100U /*!<Bit 2 */
+#define ADC_SMPR2_SMP3 0x00000E00U /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 0x00000200U /*!<Bit 0 */
+#define ADC_SMPR2_SMP3_1 0x00000400U /*!<Bit 1 */
+#define ADC_SMPR2_SMP3_2 0x00000800U /*!<Bit 2 */
+#define ADC_SMPR2_SMP4 0x00007000U /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 0x00001000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP4_1 0x00002000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP4_2 0x00004000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP5 0x00038000U /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 0x00008000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP5_1 0x00010000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP5_2 0x00020000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP6 0x001C0000U /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 0x00040000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP6_1 0x00080000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP6_2 0x00100000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP7 0x00E00000U /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 0x00200000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP7_1 0x00400000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP7_2 0x00800000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP8 0x07000000U /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 0x01000000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP8_1 0x02000000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP8_2 0x04000000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP9 0x38000000U /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 0x08000000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP9_1 0x10000000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP9_2 0x20000000U /*!<Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 0x0FFFU /*!<Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 0x0FFFU /*!<Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 0x0FFFU /*!<Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 0x0FFFU /*!<Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT 0x0FFFU /*!<Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT 0x0FFFU /*!<Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 0x0000001FU /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 0x00000001U /*!<Bit 0 */
+#define ADC_SQR1_SQ13_1 0x00000002U /*!<Bit 1 */
+#define ADC_SQR1_SQ13_2 0x00000004U /*!<Bit 2 */
+#define ADC_SQR1_SQ13_3 0x00000008U /*!<Bit 3 */
+#define ADC_SQR1_SQ13_4 0x00000010U /*!<Bit 4 */
+#define ADC_SQR1_SQ14 0x000003E0U /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 0x00000020U /*!<Bit 0 */
+#define ADC_SQR1_SQ14_1 0x00000040U /*!<Bit 1 */
+#define ADC_SQR1_SQ14_2 0x00000080U /*!<Bit 2 */
+#define ADC_SQR1_SQ14_3 0x00000100U /*!<Bit 3 */
+#define ADC_SQR1_SQ14_4 0x00000200U /*!<Bit 4 */
+#define ADC_SQR1_SQ15 0x00007C00U /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 0x00000400U /*!<Bit 0 */
+#define ADC_SQR1_SQ15_1 0x00000800U /*!<Bit 1 */
+#define ADC_SQR1_SQ15_2 0x00001000U /*!<Bit 2 */
+#define ADC_SQR1_SQ15_3 0x00002000U /*!<Bit 3 */
+#define ADC_SQR1_SQ15_4 0x00004000U /*!<Bit 4 */
+#define ADC_SQR1_SQ16 0x000F8000U /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 0x00008000U /*!<Bit 0 */
+#define ADC_SQR1_SQ16_1 0x00010000U /*!<Bit 1 */
+#define ADC_SQR1_SQ16_2 0x00020000U /*!<Bit 2 */
+#define ADC_SQR1_SQ16_3 0x00040000U /*!<Bit 3 */
+#define ADC_SQR1_SQ16_4 0x00080000U /*!<Bit 4 */
+#define ADC_SQR1_L 0x00F00000U /*!<L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 0x00100000U /*!<Bit 0 */
+#define ADC_SQR1_L_1 0x00200000U /*!<Bit 1 */
+#define ADC_SQR1_L_2 0x00400000U /*!<Bit 2 */
+#define ADC_SQR1_L_3 0x00800000U /*!<Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 0x0000001FU /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 0x00000001U /*!<Bit 0 */
+#define ADC_SQR2_SQ7_1 0x00000002U /*!<Bit 1 */
+#define ADC_SQR2_SQ7_2 0x00000004U /*!<Bit 2 */
+#define ADC_SQR2_SQ7_3 0x00000008U /*!<Bit 3 */
+#define ADC_SQR2_SQ7_4 0x00000010U /*!<Bit 4 */
+#define ADC_SQR2_SQ8 0x000003E0U /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 0x00000020U /*!<Bit 0 */
+#define ADC_SQR2_SQ8_1 0x00000040U /*!<Bit 1 */
+#define ADC_SQR2_SQ8_2 0x00000080U /*!<Bit 2 */
+#define ADC_SQR2_SQ8_3 0x00000100U /*!<Bit 3 */
+#define ADC_SQR2_SQ8_4 0x00000200U /*!<Bit 4 */
+#define ADC_SQR2_SQ9 0x00007C00U /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 0x00000400U /*!<Bit 0 */
+#define ADC_SQR2_SQ9_1 0x00000800U /*!<Bit 1 */
+#define ADC_SQR2_SQ9_2 0x00001000U /*!<Bit 2 */
+#define ADC_SQR2_SQ9_3 0x00002000U /*!<Bit 3 */
+#define ADC_SQR2_SQ9_4 0x00004000U /*!<Bit 4 */
+#define ADC_SQR2_SQ10 0x000F8000U /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 0x00008000U /*!<Bit 0 */
+#define ADC_SQR2_SQ10_1 0x00010000U /*!<Bit 1 */
+#define ADC_SQR2_SQ10_2 0x00020000U /*!<Bit 2 */
+#define ADC_SQR2_SQ10_3 0x00040000U /*!<Bit 3 */
+#define ADC_SQR2_SQ10_4 0x00080000U /*!<Bit 4 */
+#define ADC_SQR2_SQ11 0x01F00000U /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 0x00100000U /*!<Bit 0 */
+#define ADC_SQR2_SQ11_1 0x00200000U /*!<Bit 1 */
+#define ADC_SQR2_SQ11_2 0x00400000U /*!<Bit 2 */
+#define ADC_SQR2_SQ11_3 0x00800000U /*!<Bit 3 */
+#define ADC_SQR2_SQ11_4 0x01000000U /*!<Bit 4 */
+#define ADC_SQR2_SQ12 0x3E000000U /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 0x02000000U /*!<Bit 0 */
+#define ADC_SQR2_SQ12_1 0x04000000U /*!<Bit 1 */
+#define ADC_SQR2_SQ12_2 0x08000000U /*!<Bit 2 */
+#define ADC_SQR2_SQ12_3 0x10000000U /*!<Bit 3 */
+#define ADC_SQR2_SQ12_4 0x20000000U /*!<Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 0x0000001FU /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 0x00000001U /*!<Bit 0 */
+#define ADC_SQR3_SQ1_1 0x00000002U /*!<Bit 1 */
+#define ADC_SQR3_SQ1_2 0x00000004U /*!<Bit 2 */
+#define ADC_SQR3_SQ1_3 0x00000008U /*!<Bit 3 */
+#define ADC_SQR3_SQ1_4 0x00000010U /*!<Bit 4 */
+#define ADC_SQR3_SQ2 0x000003E0U /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 0x00000020U /*!<Bit 0 */
+#define ADC_SQR3_SQ2_1 0x00000040U /*!<Bit 1 */
+#define ADC_SQR3_SQ2_2 0x00000080U /*!<Bit 2 */
+#define ADC_SQR3_SQ2_3 0x00000100U /*!<Bit 3 */
+#define ADC_SQR3_SQ2_4 0x00000200U /*!<Bit 4 */
+#define ADC_SQR3_SQ3 0x00007C00U /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 0x00000400U /*!<Bit 0 */
+#define ADC_SQR3_SQ3_1 0x00000800U /*!<Bit 1 */
+#define ADC_SQR3_SQ3_2 0x00001000U /*!<Bit 2 */
+#define ADC_SQR3_SQ3_3 0x00002000U /*!<Bit 3 */
+#define ADC_SQR3_SQ3_4 0x00004000U /*!<Bit 4 */
+#define ADC_SQR3_SQ4 0x000F8000U /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 0x00008000U /*!<Bit 0 */
+#define ADC_SQR3_SQ4_1 0x00010000U /*!<Bit 1 */
+#define ADC_SQR3_SQ4_2 0x00020000U /*!<Bit 2 */
+#define ADC_SQR3_SQ4_3 0x00040000U /*!<Bit 3 */
+#define ADC_SQR3_SQ4_4 0x00080000U /*!<Bit 4 */
+#define ADC_SQR3_SQ5 0x01F00000U /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 0x00100000U /*!<Bit 0 */
+#define ADC_SQR3_SQ5_1 0x00200000U /*!<Bit 1 */
+#define ADC_SQR3_SQ5_2 0x00400000U /*!<Bit 2 */
+#define ADC_SQR3_SQ5_3 0x00800000U /*!<Bit 3 */
+#define ADC_SQR3_SQ5_4 0x01000000U /*!<Bit 4 */
+#define ADC_SQR3_SQ6 0x3E000000U /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 0x02000000U /*!<Bit 0 */
+#define ADC_SQR3_SQ6_1 0x04000000U /*!<Bit 1 */
+#define ADC_SQR3_SQ6_2 0x08000000U /*!<Bit 2 */
+#define ADC_SQR3_SQ6_3 0x10000000U /*!<Bit 3 */
+#define ADC_SQR3_SQ6_4 0x20000000U /*!<Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 0x0000001FU /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 0x00000001U /*!<Bit 0 */
+#define ADC_JSQR_JSQ1_1 0x00000002U /*!<Bit 1 */
+#define ADC_JSQR_JSQ1_2 0x00000004U /*!<Bit 2 */
+#define ADC_JSQR_JSQ1_3 0x00000008U /*!<Bit 3 */
+#define ADC_JSQR_JSQ1_4 0x00000010U /*!<Bit 4 */
+#define ADC_JSQR_JSQ2 0x000003E0U /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 0x00000020U /*!<Bit 0 */
+#define ADC_JSQR_JSQ2_1 0x00000040U /*!<Bit 1 */
+#define ADC_JSQR_JSQ2_2 0x00000080U /*!<Bit 2 */
+#define ADC_JSQR_JSQ2_3 0x00000100U /*!<Bit 3 */
+#define ADC_JSQR_JSQ2_4 0x00000200U /*!<Bit 4 */
+#define ADC_JSQR_JSQ3 0x00007C00U /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 0x00000400U /*!<Bit 0 */
+#define ADC_JSQR_JSQ3_1 0x00000800U /*!<Bit 1 */
+#define ADC_JSQR_JSQ3_2 0x00001000U /*!<Bit 2 */
+#define ADC_JSQR_JSQ3_3 0x00002000U /*!<Bit 3 */
+#define ADC_JSQR_JSQ3_4 0x00004000U /*!<Bit 4 */
+#define ADC_JSQR_JSQ4 0x000F8000U /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 0x00008000U /*!<Bit 0 */
+#define ADC_JSQR_JSQ4_1 0x00010000U /*!<Bit 1 */
+#define ADC_JSQR_JSQ4_2 0x00020000U /*!<Bit 2 */
+#define ADC_JSQR_JSQ4_3 0x00040000U /*!<Bit 3 */
+#define ADC_JSQR_JSQ4_4 0x00080000U /*!<Bit 4 */
+#define ADC_JSQR_JL 0x00300000U /*!<JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 0x00100000U /*!<Bit 0 */
+#define ADC_JSQR_JL_1 0x00200000U /*!<Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA 0xFFFFU /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA 0xFFFFU /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA 0xFFFFU /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA 0xFFFFU /*!<Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA 0x0000FFFFU /*!<Regular data */
+#define ADC_DR_ADC2DATA 0xFFFF0000U /*!<ADC2 data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 0x00000001U /*!<ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 0x00000002U /*!<ADC1 End of conversion */
+#define ADC_CSR_JEOC1 0x00000004U /*!<ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 0x00000008U /*!<ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 0x00000010U /*!<ADC1 Regular channel Start flag */
+#define ADC_CSR_OVR1 0x00000020U /*!<ADC1 DMA overrun flag */
+#define ADC_CSR_AWD2 0x00000100U /*!<ADC2 Analog watchdog flag */
+#define ADC_CSR_EOC2 0x00000200U /*!<ADC2 End of conversion */
+#define ADC_CSR_JEOC2 0x00000400U /*!<ADC2 Injected channel end of conversion */
+#define ADC_CSR_JSTRT2 0x00000800U /*!<ADC2 Injected channel Start flag */
+#define ADC_CSR_STRT2 0x00001000U /*!<ADC2 Regular channel Start flag */
+#define ADC_CSR_OVR2 0x00002000U /*!<ADC2 DMA overrun flag */
+#define ADC_CSR_AWD3 0x00010000U /*!<ADC3 Analog watchdog flag */
+#define ADC_CSR_EOC3 0x00020000U /*!<ADC3 End of conversion */
+#define ADC_CSR_JEOC3 0x00040000U /*!<ADC3 Injected channel end of conversion */
+#define ADC_CSR_JSTRT3 0x00080000U /*!<ADC3 Injected channel Start flag */
+#define ADC_CSR_STRT3 0x00100000U /*!<ADC3 Regular channel Start flag */
+#define ADC_CSR_OVR3 0x00200000U /*!<ADC3 DMA overrun flag */
+
+/* Legacy defines */
+#define ADC_CSR_DOVR1 ADC_CSR_OVR1
+#define ADC_CSR_DOVR2 ADC_CSR_OVR2
+#define ADC_CSR_DOVR3 ADC_CSR_OVR3
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_MULTI 0x0000001FU /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define ADC_CCR_MULTI_0 0x00000001U /*!<Bit 0 */
+#define ADC_CCR_MULTI_1 0x00000002U /*!<Bit 1 */
+#define ADC_CCR_MULTI_2 0x00000004U /*!<Bit 2 */
+#define ADC_CCR_MULTI_3 0x00000008U /*!<Bit 3 */
+#define ADC_CCR_MULTI_4 0x00000010U /*!<Bit 4 */
+#define ADC_CCR_DELAY 0x00000F00U /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define ADC_CCR_DELAY_0 0x00000100U /*!<Bit 0 */
+#define ADC_CCR_DELAY_1 0x00000200U /*!<Bit 1 */
+#define ADC_CCR_DELAY_2 0x00000400U /*!<Bit 2 */
+#define ADC_CCR_DELAY_3 0x00000800U /*!<Bit 3 */
+#define ADC_CCR_DDS 0x00002000U /*!<DMA disable selection (Multi-ADC mode) */
+#define ADC_CCR_DMA 0x0000C000U /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define ADC_CCR_DMA_0 0x00004000U /*!<Bit 0 */
+#define ADC_CCR_DMA_1 0x00008000U /*!<Bit 1 */
+#define ADC_CCR_ADCPRE 0x00030000U /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define ADC_CCR_ADCPRE_0 0x00010000U /*!<Bit 0 */
+#define ADC_CCR_ADCPRE_1 0x00020000U /*!<Bit 1 */
+#define ADC_CCR_VBATE 0x00400000U /*!<VBAT Enable */
+#define ADC_CCR_TSVREFE 0x00800000U /*!<Temperature Sensor and VREFINT Enable */
+
+/******************* Bit definition for ADC_CDR register ********************/
+#define ADC_CDR_DATA1 0x0000FFFFU /*!<1st data of a pair of regular conversions */
+#define ADC_CDR_DATA2 0xFFFF0000U /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR 0xFFFFFFFFU /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR 0xFFU /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET 0x01U /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DMA_SxCR register *****************/
+#define DMA_SxCR_CHSEL 0x0E000000U
+#define DMA_SxCR_CHSEL_0 0x02000000U
+#define DMA_SxCR_CHSEL_1 0x04000000U
+#define DMA_SxCR_CHSEL_2 0x08000000U
+#define DMA_SxCR_MBURST 0x01800000U
+#define DMA_SxCR_MBURST_0 0x00800000U
+#define DMA_SxCR_MBURST_1 0x01000000U
+#define DMA_SxCR_PBURST 0x00600000U
+#define DMA_SxCR_PBURST_0 0x00200000U
+#define DMA_SxCR_PBURST_1 0x00400000U
+#define DMA_SxCR_CT 0x00080000U
+#define DMA_SxCR_DBM 0x00040000U
+#define DMA_SxCR_PL 0x00030000U
+#define DMA_SxCR_PL_0 0x00010000U
+#define DMA_SxCR_PL_1 0x00020000U
+#define DMA_SxCR_PINCOS 0x00008000U
+#define DMA_SxCR_MSIZE 0x00006000U
+#define DMA_SxCR_MSIZE_0 0x00002000U
+#define DMA_SxCR_MSIZE_1 0x00004000U
+#define DMA_SxCR_PSIZE 0x00001800U
+#define DMA_SxCR_PSIZE_0 0x00000800U
+#define DMA_SxCR_PSIZE_1 0x00001000U
+#define DMA_SxCR_MINC 0x00000400U
+#define DMA_SxCR_PINC 0x00000200U
+#define DMA_SxCR_CIRC 0x00000100U
+#define DMA_SxCR_DIR 0x000000C0U
+#define DMA_SxCR_DIR_0 0x00000040U
+#define DMA_SxCR_DIR_1 0x00000080U
+#define DMA_SxCR_PFCTRL 0x00000020U
+#define DMA_SxCR_TCIE 0x00000010U
+#define DMA_SxCR_HTIE 0x00000008U
+#define DMA_SxCR_TEIE 0x00000004U
+#define DMA_SxCR_DMEIE 0x00000002U
+#define DMA_SxCR_EN 0x00000001U
+
+/* Legacy defines */
+#define DMA_SxCR_ACK 0x00100000U
+
+/******************** Bits definition for DMA_SxCNDTR register **************/
+#define DMA_SxNDT 0x0000FFFFU
+#define DMA_SxNDT_0 0x00000001U
+#define DMA_SxNDT_1 0x00000002U
+#define DMA_SxNDT_2 0x00000004U
+#define DMA_SxNDT_3 0x00000008U
+#define DMA_SxNDT_4 0x00000010U
+#define DMA_SxNDT_5 0x00000020U
+#define DMA_SxNDT_6 0x00000040U
+#define DMA_SxNDT_7 0x00000080U
+#define DMA_SxNDT_8 0x00000100U
+#define DMA_SxNDT_9 0x00000200U
+#define DMA_SxNDT_10 0x00000400U
+#define DMA_SxNDT_11 0x00000800U
+#define DMA_SxNDT_12 0x00001000U
+#define DMA_SxNDT_13 0x00002000U
+#define DMA_SxNDT_14 0x00004000U
+#define DMA_SxNDT_15 0x00008000U
+
+/******************** Bits definition for DMA_SxFCR register ****************/
+#define DMA_SxFCR_FEIE 0x00000080U
+#define DMA_SxFCR_FS 0x00000038U
+#define DMA_SxFCR_FS_0 0x00000008U
+#define DMA_SxFCR_FS_1 0x00000010U
+#define DMA_SxFCR_FS_2 0x00000020U
+#define DMA_SxFCR_DMDIS 0x00000004U
+#define DMA_SxFCR_FTH 0x00000003U
+#define DMA_SxFCR_FTH_0 0x00000001U
+#define DMA_SxFCR_FTH_1 0x00000002U
+
+/******************** Bits definition for DMA_LISR register *****************/
+#define DMA_LISR_TCIF3 0x08000000U
+#define DMA_LISR_HTIF3 0x04000000U
+#define DMA_LISR_TEIF3 0x02000000U
+#define DMA_LISR_DMEIF3 0x01000000U
+#define DMA_LISR_FEIF3 0x00400000U
+#define DMA_LISR_TCIF2 0x00200000U
+#define DMA_LISR_HTIF2 0x00100000U
+#define DMA_LISR_TEIF2 0x00080000U
+#define DMA_LISR_DMEIF2 0x00040000U
+#define DMA_LISR_FEIF2 0x00010000U
+#define DMA_LISR_TCIF1 0x00000800U
+#define DMA_LISR_HTIF1 0x00000400U
+#define DMA_LISR_TEIF1 0x00000200U
+#define DMA_LISR_DMEIF1 0x00000100U
+#define DMA_LISR_FEIF1 0x00000040U
+#define DMA_LISR_TCIF0 0x00000020U
+#define DMA_LISR_HTIF0 0x00000010U
+#define DMA_LISR_TEIF0 0x00000008U
+#define DMA_LISR_DMEIF0 0x00000004U
+#define DMA_LISR_FEIF0 0x00000001U
+
+/******************** Bits definition for DMA_HISR register *****************/
+#define DMA_HISR_TCIF7 0x08000000U
+#define DMA_HISR_HTIF7 0x04000000U
+#define DMA_HISR_TEIF7 0x02000000U
+#define DMA_HISR_DMEIF7 0x01000000U
+#define DMA_HISR_FEIF7 0x00400000U
+#define DMA_HISR_TCIF6 0x00200000U
+#define DMA_HISR_HTIF6 0x00100000U
+#define DMA_HISR_TEIF6 0x00080000U
+#define DMA_HISR_DMEIF6 0x00040000U
+#define DMA_HISR_FEIF6 0x00010000U
+#define DMA_HISR_TCIF5 0x00000800U
+#define DMA_HISR_HTIF5 0x00000400U
+#define DMA_HISR_TEIF5 0x00000200U
+#define DMA_HISR_DMEIF5 0x00000100U
+#define DMA_HISR_FEIF5 0x00000040U
+#define DMA_HISR_TCIF4 0x00000020U
+#define DMA_HISR_HTIF4 0x00000010U
+#define DMA_HISR_TEIF4 0x00000008U
+#define DMA_HISR_DMEIF4 0x00000004U
+#define DMA_HISR_FEIF4 0x00000001U
+
+/******************** Bits definition for DMA_LIFCR register ****************/
+#define DMA_LIFCR_CTCIF3 0x08000000U
+#define DMA_LIFCR_CHTIF3 0x04000000U
+#define DMA_LIFCR_CTEIF3 0x02000000U
+#define DMA_LIFCR_CDMEIF3 0x01000000U
+#define DMA_LIFCR_CFEIF3 0x00400000U
+#define DMA_LIFCR_CTCIF2 0x00200000U
+#define DMA_LIFCR_CHTIF2 0x00100000U
+#define DMA_LIFCR_CTEIF2 0x00080000U
+#define DMA_LIFCR_CDMEIF2 0x00040000U
+#define DMA_LIFCR_CFEIF2 0x00010000U
+#define DMA_LIFCR_CTCIF1 0x00000800U
+#define DMA_LIFCR_CHTIF1 0x00000400U
+#define DMA_LIFCR_CTEIF1 0x00000200U
+#define DMA_LIFCR_CDMEIF1 0x00000100U
+#define DMA_LIFCR_CFEIF1 0x00000040U
+#define DMA_LIFCR_CTCIF0 0x00000020U
+#define DMA_LIFCR_CHTIF0 0x00000010U
+#define DMA_LIFCR_CTEIF0 0x00000008U
+#define DMA_LIFCR_CDMEIF0 0x00000004U
+#define DMA_LIFCR_CFEIF0 0x00000001U
+
+/******************** Bits definition for DMA_HIFCR register ****************/
+#define DMA_HIFCR_CTCIF7 0x08000000U
+#define DMA_HIFCR_CHTIF7 0x04000000U
+#define DMA_HIFCR_CTEIF7 0x02000000U
+#define DMA_HIFCR_CDMEIF7 0x01000000U
+#define DMA_HIFCR_CFEIF7 0x00400000U
+#define DMA_HIFCR_CTCIF6 0x00200000U
+#define DMA_HIFCR_CHTIF6 0x00100000U
+#define DMA_HIFCR_CTEIF6 0x00080000U
+#define DMA_HIFCR_CDMEIF6 0x00040000U
+#define DMA_HIFCR_CFEIF6 0x00010000U
+#define DMA_HIFCR_CTCIF5 0x00000800U
+#define DMA_HIFCR_CHTIF5 0x00000400U
+#define DMA_HIFCR_CTEIF5 0x00000200U
+#define DMA_HIFCR_CDMEIF5 0x00000100U
+#define DMA_HIFCR_CFEIF5 0x00000040U
+#define DMA_HIFCR_CTCIF4 0x00000020U
+#define DMA_HIFCR_CHTIF4 0x00000010U
+#define DMA_HIFCR_CTEIF4 0x00000008U
+#define DMA_HIFCR_CDMEIF4 0x00000004U
+#define DMA_HIFCR_CFEIF4 0x00000001U
+
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 0x00000001U /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 0x00000002U /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 0x00000004U /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 0x00000008U /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 0x00000010U /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 0x00000020U /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 0x00000040U /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 0x00000080U /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 0x00000100U /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 0x00000200U /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 0x00000400U /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 0x00000800U /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 0x00001000U /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 0x00002000U /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 0x00004000U /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 0x00008000U /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 0x00010000U /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 0x00020000U /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 0x00040000U /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 0x00080000U /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 0x00100000U /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 0x00200000U /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 0x00400000U /*!< Interrupt Mask on line 22 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 0x00000001U /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 0x00000002U /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 0x00000004U /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 0x00000008U /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 0x00000010U /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 0x00000020U /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 0x00000040U /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 0x00000080U /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 0x00000100U /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 0x00000200U /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 0x00000400U /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 0x00000800U /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 0x00001000U /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 0x00002000U /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 0x00004000U /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 0x00008000U /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 0x00010000U /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 0x00020000U /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 0x00040000U /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 0x00080000U /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 0x00100000U /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 0x00200000U /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 0x00400000U /*!< Event Mask on line 22 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 0x00000001U /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 0x00000002U /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 0x00000004U /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 0x00000008U /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 0x00000010U /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 0x00000020U /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 0x00000040U /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 0x00000080U /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 0x00000100U /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 0x00000200U /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 0x00000400U /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 0x00000800U /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 0x00001000U /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 0x00002000U /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 0x00004000U /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 0x00008000U /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 0x00010000U /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 0x00020000U /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 0x00040000U /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 0x00080000U /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 0x00100000U /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 0x00200000U /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 0x00400000U /*!< Rising trigger event configuration bit of line 22 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 0x00000001U /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 0x00000002U /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 0x00000004U /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 0x00000008U /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 0x00000010U /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 0x00000020U /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 0x00000040U /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 0x00000080U /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 0x00000100U /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 0x00000200U /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 0x00000400U /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 0x00000800U /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 0x00001000U /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 0x00002000U /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 0x00004000U /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 0x00008000U /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 0x00010000U /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 0x00020000U /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 0x00040000U /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 0x00080000U /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 0x00100000U /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 0x00200000U /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 0x00400000U /*!< Falling trigger event configuration bit of line 22 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 0x00000001U /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 0x00000002U /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 0x00000004U /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 0x00000008U /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 0x00000010U /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 0x00000020U /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 0x00000040U /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 0x00000080U /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 0x00000100U /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 0x00000200U /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 0x00000400U /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 0x00000800U /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 0x00001000U /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 0x00002000U /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 0x00004000U /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 0x00008000U /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 0x00010000U /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 0x00020000U /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 0x00040000U /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 0x00080000U /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 0x00100000U /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 0x00200000U /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 0x00400000U /*!< Software Interrupt on line 22 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 0x00000001U /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 0x00000002U /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 0x00000004U /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 0x00000008U /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 0x00000010U /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 0x00000020U /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 0x00000040U /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 0x00000080U /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 0x00000100U /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 0x00000200U /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 0x00000400U /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 0x00000800U /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 0x00001000U /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 0x00002000U /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 0x00004000U /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 0x00008000U /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 0x00010000U /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 0x00020000U /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 0x00040000U /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 0x00080000U /*!< Pending bit for line 19 */
+#define EXTI_PR_PR20 0x00100000U /*!< Pending bit for line 20 */
+#define EXTI_PR_PR21 0x00200000U /*!< Pending bit for line 21 */
+#define EXTI_PR_PR22 0x00400000U /*!< Pending bit for line 22 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bits definition for FLASH_ACR register *****************/
+#define FLASH_ACR_LATENCY 0x0000000FU
+#define FLASH_ACR_LATENCY_0WS 0x00000000U
+#define FLASH_ACR_LATENCY_1WS 0x00000001U
+#define FLASH_ACR_LATENCY_2WS 0x00000002U
+#define FLASH_ACR_LATENCY_3WS 0x00000003U
+#define FLASH_ACR_LATENCY_4WS 0x00000004U
+#define FLASH_ACR_LATENCY_5WS 0x00000005U
+#define FLASH_ACR_LATENCY_6WS 0x00000006U
+#define FLASH_ACR_LATENCY_7WS 0x00000007U
+
+#define FLASH_ACR_PRFTEN 0x00000100U
+#define FLASH_ACR_ICEN 0x00000200U
+#define FLASH_ACR_DCEN 0x00000400U
+#define FLASH_ACR_ICRST 0x00000800U
+#define FLASH_ACR_DCRST 0x00001000U
+#define FLASH_ACR_BYTE0_ADDRESS 0x40023C00U
+#define FLASH_ACR_BYTE2_ADDRESS 0x40023C03U
+
+/******************* Bits definition for FLASH_SR register ******************/
+#define FLASH_SR_EOP 0x00000001U
+#define FLASH_SR_SOP 0x00000002U
+#define FLASH_SR_WRPERR 0x00000010U
+#define FLASH_SR_PGAERR 0x00000020U
+#define FLASH_SR_PGPERR 0x00000040U
+#define FLASH_SR_PGSERR 0x00000080U
+#define FLASH_SR_BSY 0x00010000U
+
+/******************* Bits definition for FLASH_CR register ******************/
+#define FLASH_CR_PG 0x00000001U
+#define FLASH_CR_SER 0x00000002U
+#define FLASH_CR_MER 0x00000004U
+#define FLASH_CR_SNB 0x000000F8U
+#define FLASH_CR_SNB_0 0x00000008U
+#define FLASH_CR_SNB_1 0x00000010U
+#define FLASH_CR_SNB_2 0x00000020U
+#define FLASH_CR_SNB_3 0x00000040U
+#define FLASH_CR_SNB_4 0x00000080U
+#define FLASH_CR_PSIZE 0x00000300U
+#define FLASH_CR_PSIZE_0 0x00000100U
+#define FLASH_CR_PSIZE_1 0x00000200U
+#define FLASH_CR_STRT 0x00010000U
+#define FLASH_CR_EOPIE 0x01000000U
+#define FLASH_CR_LOCK 0x80000000U
+
+/******************* Bits definition for FLASH_OPTCR register ***************/
+#define FLASH_OPTCR_OPTLOCK 0x00000001U
+#define FLASH_OPTCR_OPTSTRT 0x00000002U
+#define FLASH_OPTCR_BOR_LEV_0 0x00000004U
+#define FLASH_OPTCR_BOR_LEV_1 0x00000008U
+#define FLASH_OPTCR_BOR_LEV 0x0000000CU
+
+#define FLASH_OPTCR_WDG_SW 0x00000020U
+#define FLASH_OPTCR_nRST_STOP 0x00000040U
+#define FLASH_OPTCR_nRST_STDBY 0x00000080U
+#define FLASH_OPTCR_RDP 0x0000FF00U
+#define FLASH_OPTCR_RDP_0 0x00000100U
+#define FLASH_OPTCR_RDP_1 0x00000200U
+#define FLASH_OPTCR_RDP_2 0x00000400U
+#define FLASH_OPTCR_RDP_3 0x00000800U
+#define FLASH_OPTCR_RDP_4 0x00001000U
+#define FLASH_OPTCR_RDP_5 0x00002000U
+#define FLASH_OPTCR_RDP_6 0x00004000U
+#define FLASH_OPTCR_RDP_7 0x00008000U
+#define FLASH_OPTCR_nWRP 0x0FFF0000U
+#define FLASH_OPTCR_nWRP_0 0x00010000U
+#define FLASH_OPTCR_nWRP_1 0x00020000U
+#define FLASH_OPTCR_nWRP_2 0x00040000U
+#define FLASH_OPTCR_nWRP_3 0x00080000U
+#define FLASH_OPTCR_nWRP_4 0x00100000U
+#define FLASH_OPTCR_nWRP_5 0x00200000U
+#define FLASH_OPTCR_nWRP_6 0x00400000U
+#define FLASH_OPTCR_nWRP_7 0x00800000U
+#define FLASH_OPTCR_nWRP_8 0x01000000U
+#define FLASH_OPTCR_nWRP_9 0x02000000U
+#define FLASH_OPTCR_nWRP_10 0x04000000U
+#define FLASH_OPTCR_nWRP_11 0x08000000U
+
+/****************** Bits definition for FLASH_OPTCR1 register ***************/
+#define FLASH_OPTCR1_nWRP 0x0FFF0000U
+#define FLASH_OPTCR1_nWRP_0 0x00010000U
+#define FLASH_OPTCR1_nWRP_1 0x00020000U
+#define FLASH_OPTCR1_nWRP_2 0x00040000U
+#define FLASH_OPTCR1_nWRP_3 0x00080000U
+#define FLASH_OPTCR1_nWRP_4 0x00100000U
+#define FLASH_OPTCR1_nWRP_5 0x00200000U
+#define FLASH_OPTCR1_nWRP_6 0x00400000U
+#define FLASH_OPTCR1_nWRP_7 0x00800000U
+#define FLASH_OPTCR1_nWRP_8 0x01000000U
+#define FLASH_OPTCR1_nWRP_9 0x02000000U
+#define FLASH_OPTCR1_nWRP_10 0x04000000U
+#define FLASH_OPTCR1_nWRP_11 0x08000000U
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 0x00000003U
+#define GPIO_MODER_MODER0_0 0x00000001U
+#define GPIO_MODER_MODER0_1 0x00000002U
+
+#define GPIO_MODER_MODER1 0x0000000CU
+#define GPIO_MODER_MODER1_0 0x00000004U
+#define GPIO_MODER_MODER1_1 0x00000008U
+
+#define GPIO_MODER_MODER2 0x00000030U
+#define GPIO_MODER_MODER2_0 0x00000010U
+#define GPIO_MODER_MODER2_1 0x00000020U
+
+#define GPIO_MODER_MODER3 0x000000C0U
+#define GPIO_MODER_MODER3_0 0x00000040U
+#define GPIO_MODER_MODER3_1 0x00000080U
+
+#define GPIO_MODER_MODER4 0x00000300U
+#define GPIO_MODER_MODER4_0 0x00000100U
+#define GPIO_MODER_MODER4_1 0x00000200U
+
+#define GPIO_MODER_MODER5 0x00000C00U
+#define GPIO_MODER_MODER5_0 0x00000400U
+#define GPIO_MODER_MODER5_1 0x00000800U
+
+#define GPIO_MODER_MODER6 0x00003000U
+#define GPIO_MODER_MODER6_0 0x00001000U
+#define GPIO_MODER_MODER6_1 0x00002000U
+
+#define GPIO_MODER_MODER7 0x0000C000U
+#define GPIO_MODER_MODER7_0 0x00004000U
+#define GPIO_MODER_MODER7_1 0x00008000U
+
+#define GPIO_MODER_MODER8 0x00030000U
+#define GPIO_MODER_MODER8_0 0x00010000U
+#define GPIO_MODER_MODER8_1 0x00020000U
+
+#define GPIO_MODER_MODER9 0x000C0000U
+#define GPIO_MODER_MODER9_0 0x00040000U
+#define GPIO_MODER_MODER9_1 0x00080000U
+
+#define GPIO_MODER_MODER10 0x00300000U
+#define GPIO_MODER_MODER10_0 0x00100000U
+#define GPIO_MODER_MODER10_1 0x00200000U
+
+#define GPIO_MODER_MODER11 0x00C00000U
+#define GPIO_MODER_MODER11_0 0x00400000U
+#define GPIO_MODER_MODER11_1 0x00800000U
+
+#define GPIO_MODER_MODER12 0x03000000U
+#define GPIO_MODER_MODER12_0 0x01000000U
+#define GPIO_MODER_MODER12_1 0x02000000U
+
+#define GPIO_MODER_MODER13 0x0C000000U
+#define GPIO_MODER_MODER13_0 0x04000000U
+#define GPIO_MODER_MODER13_1 0x08000000U
+
+#define GPIO_MODER_MODER14 0x30000000U
+#define GPIO_MODER_MODER14_0 0x10000000U
+#define GPIO_MODER_MODER14_1 0x20000000U
+
+#define GPIO_MODER_MODER15 0xC0000000U
+#define GPIO_MODER_MODER15_0 0x40000000U
+#define GPIO_MODER_MODER15_1 0x80000000U
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 0x00000001U
+#define GPIO_OTYPER_OT_1 0x00000002U
+#define GPIO_OTYPER_OT_2 0x00000004U
+#define GPIO_OTYPER_OT_3 0x00000008U
+#define GPIO_OTYPER_OT_4 0x00000010U
+#define GPIO_OTYPER_OT_5 0x00000020U
+#define GPIO_OTYPER_OT_6 0x00000040U
+#define GPIO_OTYPER_OT_7 0x00000080U
+#define GPIO_OTYPER_OT_8 0x00000100U
+#define GPIO_OTYPER_OT_9 0x00000200U
+#define GPIO_OTYPER_OT_10 0x00000400U
+#define GPIO_OTYPER_OT_11 0x00000800U
+#define GPIO_OTYPER_OT_12 0x00001000U
+#define GPIO_OTYPER_OT_13 0x00002000U
+#define GPIO_OTYPER_OT_14 0x00004000U
+#define GPIO_OTYPER_OT_15 0x00008000U
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 0x00000003U
+#define GPIO_OSPEEDER_OSPEEDR0_0 0x00000001U
+#define GPIO_OSPEEDER_OSPEEDR0_1 0x00000002U
+
+#define GPIO_OSPEEDER_OSPEEDR1 0x0000000CU
+#define GPIO_OSPEEDER_OSPEEDR1_0 0x00000004U
+#define GPIO_OSPEEDER_OSPEEDR1_1 0x00000008U
+
+#define GPIO_OSPEEDER_OSPEEDR2 0x00000030U
+#define GPIO_OSPEEDER_OSPEEDR2_0 0x00000010U
+#define GPIO_OSPEEDER_OSPEEDR2_1 0x00000020U
+
+#define GPIO_OSPEEDER_OSPEEDR3 0x000000C0U
+#define GPIO_OSPEEDER_OSPEEDR3_0 0x00000040U
+#define GPIO_OSPEEDER_OSPEEDR3_1 0x00000080U
+
+#define GPIO_OSPEEDER_OSPEEDR4 0x00000300U
+#define GPIO_OSPEEDER_OSPEEDR4_0 0x00000100U
+#define GPIO_OSPEEDER_OSPEEDR4_1 0x00000200U
+
+#define GPIO_OSPEEDER_OSPEEDR5 0x00000C00U
+#define GPIO_OSPEEDER_OSPEEDR5_0 0x00000400U
+#define GPIO_OSPEEDER_OSPEEDR5_1 0x00000800U
+
+#define GPIO_OSPEEDER_OSPEEDR6 0x00003000U
+#define GPIO_OSPEEDER_OSPEEDR6_0 0x00001000U
+#define GPIO_OSPEEDER_OSPEEDR6_1 0x00002000U
+
+#define GPIO_OSPEEDER_OSPEEDR7 0x0000C000U
+#define GPIO_OSPEEDER_OSPEEDR7_0 0x00004000U
+#define GPIO_OSPEEDER_OSPEEDR7_1 0x00008000U
+
+#define GPIO_OSPEEDER_OSPEEDR8 0x00030000U
+#define GPIO_OSPEEDER_OSPEEDR8_0 0x00010000U
+#define GPIO_OSPEEDER_OSPEEDR8_1 0x00020000U
+
+#define GPIO_OSPEEDER_OSPEEDR9 0x000C0000U
+#define GPIO_OSPEEDER_OSPEEDR9_0 0x00040000U
+#define GPIO_OSPEEDER_OSPEEDR9_1 0x00080000U
+
+#define GPIO_OSPEEDER_OSPEEDR10 0x00300000U
+#define GPIO_OSPEEDER_OSPEEDR10_0 0x00100000U
+#define GPIO_OSPEEDER_OSPEEDR10_1 0x00200000U
+
+#define GPIO_OSPEEDER_OSPEEDR11 0x00C00000U
+#define GPIO_OSPEEDER_OSPEEDR11_0 0x00400000U
+#define GPIO_OSPEEDER_OSPEEDR11_1 0x00800000U
+
+#define GPIO_OSPEEDER_OSPEEDR12 0x03000000U
+#define GPIO_OSPEEDER_OSPEEDR12_0 0x01000000U
+#define GPIO_OSPEEDER_OSPEEDR12_1 0x02000000U
+
+#define GPIO_OSPEEDER_OSPEEDR13 0x0C000000U
+#define GPIO_OSPEEDER_OSPEEDR13_0 0x04000000U
+#define GPIO_OSPEEDER_OSPEEDR13_1 0x08000000U
+
+#define GPIO_OSPEEDER_OSPEEDR14 0x30000000U
+#define GPIO_OSPEEDER_OSPEEDR14_0 0x10000000U
+#define GPIO_OSPEEDER_OSPEEDR14_1 0x20000000U
+
+#define GPIO_OSPEEDER_OSPEEDR15 0xC0000000U
+#define GPIO_OSPEEDER_OSPEEDR15_0 0x40000000U
+#define GPIO_OSPEEDER_OSPEEDR15_1 0x80000000U
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 0x00000003U
+#define GPIO_PUPDR_PUPDR0_0 0x00000001U
+#define GPIO_PUPDR_PUPDR0_1 0x00000002U
+
+#define GPIO_PUPDR_PUPDR1 0x0000000CU
+#define GPIO_PUPDR_PUPDR1_0 0x00000004U
+#define GPIO_PUPDR_PUPDR1_1 0x00000008U
+
+#define GPIO_PUPDR_PUPDR2 0x00000030U
+#define GPIO_PUPDR_PUPDR2_0 0x00000010U
+#define GPIO_PUPDR_PUPDR2_1 0x00000020U
+
+#define GPIO_PUPDR_PUPDR3 0x000000C0U
+#define GPIO_PUPDR_PUPDR3_0 0x00000040U
+#define GPIO_PUPDR_PUPDR3_1 0x00000080U
+
+#define GPIO_PUPDR_PUPDR4 0x00000300U
+#define GPIO_PUPDR_PUPDR4_0 0x00000100U
+#define GPIO_PUPDR_PUPDR4_1 0x00000200U
+
+#define GPIO_PUPDR_PUPDR5 0x00000C00U
+#define GPIO_PUPDR_PUPDR5_0 0x00000400U
+#define GPIO_PUPDR_PUPDR5_1 0x00000800U
+
+#define GPIO_PUPDR_PUPDR6 0x00003000U
+#define GPIO_PUPDR_PUPDR6_0 0x00001000U
+#define GPIO_PUPDR_PUPDR6_1 0x00002000U
+
+#define GPIO_PUPDR_PUPDR7 0x0000C000U
+#define GPIO_PUPDR_PUPDR7_0 0x00004000U
+#define GPIO_PUPDR_PUPDR7_1 0x00008000U
+
+#define GPIO_PUPDR_PUPDR8 0x00030000U
+#define GPIO_PUPDR_PUPDR8_0 0x00010000U
+#define GPIO_PUPDR_PUPDR8_1 0x00020000U
+
+#define GPIO_PUPDR_PUPDR9 0x000C0000U
+#define GPIO_PUPDR_PUPDR9_0 0x00040000U
+#define GPIO_PUPDR_PUPDR9_1 0x00080000U
+
+#define GPIO_PUPDR_PUPDR10 0x00300000U
+#define GPIO_PUPDR_PUPDR10_0 0x00100000U
+#define GPIO_PUPDR_PUPDR10_1 0x00200000U
+
+#define GPIO_PUPDR_PUPDR11 0x00C00000U
+#define GPIO_PUPDR_PUPDR11_0 0x00400000U
+#define GPIO_PUPDR_PUPDR11_1 0x00800000U
+
+#define GPIO_PUPDR_PUPDR12 0x03000000U
+#define GPIO_PUPDR_PUPDR12_0 0x01000000U
+#define GPIO_PUPDR_PUPDR12_1 0x02000000U
+
+#define GPIO_PUPDR_PUPDR13 0x0C000000U
+#define GPIO_PUPDR_PUPDR13_0 0x04000000U
+#define GPIO_PUPDR_PUPDR13_1 0x08000000U
+
+#define GPIO_PUPDR_PUPDR14 0x30000000U
+#define GPIO_PUPDR_PUPDR14_0 0x10000000U
+#define GPIO_PUPDR_PUPDR14_1 0x20000000U
+
+#define GPIO_PUPDR_PUPDR15 0xC0000000U
+#define GPIO_PUPDR_PUPDR15_0 0x40000000U
+#define GPIO_PUPDR_PUPDR15_1 0x80000000U
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 0x00000001U
+#define GPIO_IDR_IDR_1 0x00000002U
+#define GPIO_IDR_IDR_2 0x00000004U
+#define GPIO_IDR_IDR_3 0x00000008U
+#define GPIO_IDR_IDR_4 0x00000010U
+#define GPIO_IDR_IDR_5 0x00000020U
+#define GPIO_IDR_IDR_6 0x00000040U
+#define GPIO_IDR_IDR_7 0x00000080U
+#define GPIO_IDR_IDR_8 0x00000100U
+#define GPIO_IDR_IDR_9 0x00000200U
+#define GPIO_IDR_IDR_10 0x00000400U
+#define GPIO_IDR_IDR_11 0x00000800U
+#define GPIO_IDR_IDR_12 0x00001000U
+#define GPIO_IDR_IDR_13 0x00002000U
+#define GPIO_IDR_IDR_14 0x00004000U
+#define GPIO_IDR_IDR_15 0x00008000U
+/* Old GPIO_IDR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_IDR_0 GPIO_IDR_IDR_0
+#define GPIO_OTYPER_IDR_1 GPIO_IDR_IDR_1
+#define GPIO_OTYPER_IDR_2 GPIO_IDR_IDR_2
+#define GPIO_OTYPER_IDR_3 GPIO_IDR_IDR_3
+#define GPIO_OTYPER_IDR_4 GPIO_IDR_IDR_4
+#define GPIO_OTYPER_IDR_5 GPIO_IDR_IDR_5
+#define GPIO_OTYPER_IDR_6 GPIO_IDR_IDR_6
+#define GPIO_OTYPER_IDR_7 GPIO_IDR_IDR_7
+#define GPIO_OTYPER_IDR_8 GPIO_IDR_IDR_8
+#define GPIO_OTYPER_IDR_9 GPIO_IDR_IDR_9
+#define GPIO_OTYPER_IDR_10 GPIO_IDR_IDR_10
+#define GPIO_OTYPER_IDR_11 GPIO_IDR_IDR_11
+#define GPIO_OTYPER_IDR_12 GPIO_IDR_IDR_12
+#define GPIO_OTYPER_IDR_13 GPIO_IDR_IDR_13
+#define GPIO_OTYPER_IDR_14 GPIO_IDR_IDR_14
+#define GPIO_OTYPER_IDR_15 GPIO_IDR_IDR_15
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 0x00000001U
+#define GPIO_ODR_ODR_1 0x00000002U
+#define GPIO_ODR_ODR_2 0x00000004U
+#define GPIO_ODR_ODR_3 0x00000008U
+#define GPIO_ODR_ODR_4 0x00000010U
+#define GPIO_ODR_ODR_5 0x00000020U
+#define GPIO_ODR_ODR_6 0x00000040U
+#define GPIO_ODR_ODR_7 0x00000080U
+#define GPIO_ODR_ODR_8 0x00000100U
+#define GPIO_ODR_ODR_9 0x00000200U
+#define GPIO_ODR_ODR_10 0x00000400U
+#define GPIO_ODR_ODR_11 0x00000800U
+#define GPIO_ODR_ODR_12 0x00001000U
+#define GPIO_ODR_ODR_13 0x00002000U
+#define GPIO_ODR_ODR_14 0x00004000U
+#define GPIO_ODR_ODR_15 0x00008000U
+/* Old GPIO_ODR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_ODR_0 GPIO_ODR_ODR_0
+#define GPIO_OTYPER_ODR_1 GPIO_ODR_ODR_1
+#define GPIO_OTYPER_ODR_2 GPIO_ODR_ODR_2
+#define GPIO_OTYPER_ODR_3 GPIO_ODR_ODR_3
+#define GPIO_OTYPER_ODR_4 GPIO_ODR_ODR_4
+#define GPIO_OTYPER_ODR_5 GPIO_ODR_ODR_5
+#define GPIO_OTYPER_ODR_6 GPIO_ODR_ODR_6
+#define GPIO_OTYPER_ODR_7 GPIO_ODR_ODR_7
+#define GPIO_OTYPER_ODR_8 GPIO_ODR_ODR_8
+#define GPIO_OTYPER_ODR_9 GPIO_ODR_ODR_9
+#define GPIO_OTYPER_ODR_10 GPIO_ODR_ODR_10
+#define GPIO_OTYPER_ODR_11 GPIO_ODR_ODR_11
+#define GPIO_OTYPER_ODR_12 GPIO_ODR_ODR_12
+#define GPIO_OTYPER_ODR_13 GPIO_ODR_ODR_13
+#define GPIO_OTYPER_ODR_14 GPIO_ODR_ODR_14
+#define GPIO_OTYPER_ODR_15 GPIO_ODR_ODR_15
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 0x00000001U
+#define GPIO_BSRR_BS_1 0x00000002U
+#define GPIO_BSRR_BS_2 0x00000004U
+#define GPIO_BSRR_BS_3 0x00000008U
+#define GPIO_BSRR_BS_4 0x00000010U
+#define GPIO_BSRR_BS_5 0x00000020U
+#define GPIO_BSRR_BS_6 0x00000040U
+#define GPIO_BSRR_BS_7 0x00000080U
+#define GPIO_BSRR_BS_8 0x00000100U
+#define GPIO_BSRR_BS_9 0x00000200U
+#define GPIO_BSRR_BS_10 0x00000400U
+#define GPIO_BSRR_BS_11 0x00000800U
+#define GPIO_BSRR_BS_12 0x00001000U
+#define GPIO_BSRR_BS_13 0x00002000U
+#define GPIO_BSRR_BS_14 0x00004000U
+#define GPIO_BSRR_BS_15 0x00008000U
+#define GPIO_BSRR_BR_0 0x00010000U
+#define GPIO_BSRR_BR_1 0x00020000U
+#define GPIO_BSRR_BR_2 0x00040000U
+#define GPIO_BSRR_BR_3 0x00080000U
+#define GPIO_BSRR_BR_4 0x00100000U
+#define GPIO_BSRR_BR_5 0x00200000U
+#define GPIO_BSRR_BR_6 0x00400000U
+#define GPIO_BSRR_BR_7 0x00800000U
+#define GPIO_BSRR_BR_8 0x01000000U
+#define GPIO_BSRR_BR_9 0x02000000U
+#define GPIO_BSRR_BR_10 0x04000000U
+#define GPIO_BSRR_BR_11 0x08000000U
+#define GPIO_BSRR_BR_12 0x10000000U
+#define GPIO_BSRR_BR_13 0x20000000U
+#define GPIO_BSRR_BR_14 0x40000000U
+#define GPIO_BSRR_BR_15 0x80000000U
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 0x00000001U
+#define GPIO_LCKR_LCK1 0x00000002U
+#define GPIO_LCKR_LCK2 0x00000004U
+#define GPIO_LCKR_LCK3 0x00000008U
+#define GPIO_LCKR_LCK4 0x00000010U
+#define GPIO_LCKR_LCK5 0x00000020U
+#define GPIO_LCKR_LCK6 0x00000040U
+#define GPIO_LCKR_LCK7 0x00000080U
+#define GPIO_LCKR_LCK8 0x00000100U
+#define GPIO_LCKR_LCK9 0x00000200U
+#define GPIO_LCKR_LCK10 0x00000400U
+#define GPIO_LCKR_LCK11 0x00000800U
+#define GPIO_LCKR_LCK12 0x00001000U
+#define GPIO_LCKR_LCK13 0x00002000U
+#define GPIO_LCKR_LCK14 0x00004000U
+#define GPIO_LCKR_LCK15 0x00008000U
+#define GPIO_LCKR_LCKK 0x00010000U
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE 0x00000001U /*!<Peripheral Enable */
+#define I2C_CR1_SMBUS 0x00000002U /*!<SMBus Mode */
+#define I2C_CR1_SMBTYPE 0x00000008U /*!<SMBus Type */
+#define I2C_CR1_ENARP 0x00000010U /*!<ARP Enable */
+#define I2C_CR1_ENPEC 0x00000020U /*!<PEC Enable */
+#define I2C_CR1_ENGC 0x00000040U /*!<General Call Enable */
+#define I2C_CR1_NOSTRETCH 0x00000080U /*!<Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START 0x00000100U /*!<Start Generation */
+#define I2C_CR1_STOP 0x00000200U /*!<Stop Generation */
+#define I2C_CR1_ACK 0x00000400U /*!<Acknowledge Enable */
+#define I2C_CR1_POS 0x00000800U /*!<Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC 0x00001000U /*!<Packet Error Checking */
+#define I2C_CR1_ALERT 0x00002000U /*!<SMBus Alert */
+#define I2C_CR1_SWRST 0x00008000U /*!<Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ 0x0000003FU /*!<FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 0x00000001U /*!<Bit 0 */
+#define I2C_CR2_FREQ_1 0x00000002U /*!<Bit 1 */
+#define I2C_CR2_FREQ_2 0x00000004U /*!<Bit 2 */
+#define I2C_CR2_FREQ_3 0x00000008U /*!<Bit 3 */
+#define I2C_CR2_FREQ_4 0x00000010U /*!<Bit 4 */
+#define I2C_CR2_FREQ_5 0x00000020U /*!<Bit 5 */
+
+#define I2C_CR2_ITERREN 0x00000100U /*!<Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN 0x00000200U /*!<Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN 0x00000400U /*!<Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN 0x00000800U /*!<DMA Requests Enable */
+#define I2C_CR2_LAST 0x00001000U /*!<DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 0x000000FEU /*!<Interface Address */
+#define I2C_OAR1_ADD8_9 0x00000300U /*!<Interface Address */
+
+#define I2C_OAR1_ADD0 0x00000001U /*!<Bit 0 */
+#define I2C_OAR1_ADD1 0x00000002U /*!<Bit 1 */
+#define I2C_OAR1_ADD2 0x00000004U /*!<Bit 2 */
+#define I2C_OAR1_ADD3 0x00000008U /*!<Bit 3 */
+#define I2C_OAR1_ADD4 0x00000010U /*!<Bit 4 */
+#define I2C_OAR1_ADD5 0x00000020U /*!<Bit 5 */
+#define I2C_OAR1_ADD6 0x00000040U /*!<Bit 6 */
+#define I2C_OAR1_ADD7 0x00000080U /*!<Bit 7 */
+#define I2C_OAR1_ADD8 0x00000100U /*!<Bit 8 */
+#define I2C_OAR1_ADD9 0x00000200U /*!<Bit 9 */
+
+#define I2C_OAR1_ADDMODE 0x00008000U /*!<Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL 0x00000001U /*!<Dual addressing mode enable */
+#define I2C_OAR2_ADD2 0x000000FEU /*!<Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR 0x000000FFU /*!<8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB 0x00000001U /*!<Start Bit (Master mode) */
+#define I2C_SR1_ADDR 0x00000002U /*!<Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF 0x00000004U /*!<Byte Transfer Finished */
+#define I2C_SR1_ADD10 0x00000008U /*!<10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF 0x00000010U /*!<Stop detection (Slave mode) */
+#define I2C_SR1_RXNE 0x00000040U /*!<Data Register not Empty (receivers) */
+#define I2C_SR1_TXE 0x00000080U /*!<Data Register Empty (transmitters) */
+#define I2C_SR1_BERR 0x00000100U /*!<Bus Error */
+#define I2C_SR1_ARLO 0x00000200U /*!<Arbitration Lost (master mode) */
+#define I2C_SR1_AF 0x00000400U /*!<Acknowledge Failure */
+#define I2C_SR1_OVR 0x00000800U /*!<Overrun/Underrun */
+#define I2C_SR1_PECERR 0x00001000U /*!<PEC Error in reception */
+#define I2C_SR1_TIMEOUT 0x00004000U /*!<Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT 0x00008000U /*!<SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL 0x00000001U /*!<Master/Slave */
+#define I2C_SR2_BUSY 0x00000002U /*!<Bus Busy */
+#define I2C_SR2_TRA 0x00000004U /*!<Transmitter/Receiver */
+#define I2C_SR2_GENCALL 0x00000010U /*!<General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT 0x00000020U /*!<SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST 0x00000040U /*!<SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF 0x00000080U /*!<Dual Flag (Slave mode) */
+#define I2C_SR2_PEC 0x0000FF00U /*!<Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR 0x00000FFFU /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY 0x00004000U /*!<Fast Mode Duty Cycle */
+#define I2C_CCR_FS 0x00008000U /*!<I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE 0x0000003FU /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/****************** Bit definition for I2C_FLTR register *******************/
+#define I2C_FLTR_DNF 0x0000000FU /*!<Digital Noise Filter */
+#define I2C_FLTR_ANOFF 0x00000010U /*!<Analog Noise Filter OFF */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY 0xFFFFU /*!<Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR 0x07U /*!<PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 0x01U /*!<Bit 0 */
+#define IWDG_PR_PR_1 0x02U /*!<Bit 1 */
+#define IWDG_PR_PR_2 0x04U /*!<Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL 0x0FFFU /*!<Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU 0x01U /*!<Watchdog prescaler value update */
+#define IWDG_SR_RVU 0x02U /*!<Watchdog counter reload value update */
+
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS 0x00000001U /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS 0x00000002U /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF 0x00000004U /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF 0x00000008U /*!< Clear Standby Flag */
+#define PWR_CR_PVDE 0x00000010U /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS 0x000000E0U /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 0x00000020U /*!< Bit 0 */
+#define PWR_CR_PLS_1 0x00000040U /*!< Bit 1 */
+#define PWR_CR_PLS_2 0x00000080U /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 7 */
+
+#define PWR_CR_DBP 0x00000100U /*!< Disable Backup Domain write protection */
+#define PWR_CR_FPDS 0x00000200U /*!< Flash power down in Stop mode */
+#define PWR_CR_LPLVDS 0x00000400U /*!< Low Power Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_MRLVDS 0x00000800U /*!< Main Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_ADCDC1 0x00002000U /*!< Refer to AN4073 on how to use this bit */
+#define PWR_CR_VOS 0x0000C000U /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define PWR_CR_VOS_0 0x00004000U /*!< Bit 0 */
+#define PWR_CR_VOS_1 0x00008000U /*!< Bit 1 */
+
+/* Legacy define */
+#define PWR_CR_PMODE PWR_CR_VOS
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF 0x00000001U /*!< Wakeup Flag */
+#define PWR_CSR_SBF 0x00000002U /*!< Standby Flag */
+#define PWR_CSR_PVDO 0x00000004U /*!< PVD Output */
+#define PWR_CSR_BRR 0x00000008U /*!< Backup regulator ready */
+#define PWR_CSR_EWUP 0x00000100U /*!< Enable WKUP pin */
+#define PWR_CSR_BRE 0x00000200U /*!< Backup regulator enable */
+#define PWR_CSR_VOSRDY 0x00004000U /*!< Regulator voltage scaling output selection ready */
+
+/* Legacy define */
+#define PWR_CSR_REGRDY PWR_CSR_VOSRDY
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION 0x00000001U
+#define RCC_CR_HSIRDY 0x00000002U
+
+#define RCC_CR_HSITRIM 0x000000F8U
+#define RCC_CR_HSITRIM_0 0x00000008U/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 0x00000010U/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 0x00000020U/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 0x00000040U/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 0x00000080U/*!<Bit 4 */
+
+#define RCC_CR_HSICAL 0x0000FF00U
+#define RCC_CR_HSICAL_0 0x00000100U/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 0x00000200U/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 0x00000400U/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 0x00000800U/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 0x00001000U/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 0x00002000U/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 0x00004000U/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 0x00008000U/*!<Bit 7 */
+
+#define RCC_CR_HSEON 0x00010000U
+#define RCC_CR_HSERDY 0x00020000U
+#define RCC_CR_HSEBYP 0x00040000U
+#define RCC_CR_CSSON 0x00080000U
+#define RCC_CR_PLLON 0x01000000U
+#define RCC_CR_PLLRDY 0x02000000U
+#define RCC_CR_PLLI2SON 0x04000000U
+#define RCC_CR_PLLI2SRDY 0x08000000U
+
+/******************** Bit definition for RCC_PLLCFGR register ***************/
+#define RCC_PLLCFGR_PLLM 0x0000003FU
+#define RCC_PLLCFGR_PLLM_0 0x00000001U
+#define RCC_PLLCFGR_PLLM_1 0x00000002U
+#define RCC_PLLCFGR_PLLM_2 0x00000004U
+#define RCC_PLLCFGR_PLLM_3 0x00000008U
+#define RCC_PLLCFGR_PLLM_4 0x00000010U
+#define RCC_PLLCFGR_PLLM_5 0x00000020U
+
+#define RCC_PLLCFGR_PLLN 0x00007FC0U
+#define RCC_PLLCFGR_PLLN_0 0x00000040U
+#define RCC_PLLCFGR_PLLN_1 0x00000080U
+#define RCC_PLLCFGR_PLLN_2 0x00000100U
+#define RCC_PLLCFGR_PLLN_3 0x00000200U
+#define RCC_PLLCFGR_PLLN_4 0x00000400U
+#define RCC_PLLCFGR_PLLN_5 0x00000800U
+#define RCC_PLLCFGR_PLLN_6 0x00001000U
+#define RCC_PLLCFGR_PLLN_7 0x00002000U
+#define RCC_PLLCFGR_PLLN_8 0x00004000U
+
+#define RCC_PLLCFGR_PLLP 0x00030000U
+#define RCC_PLLCFGR_PLLP_0 0x00010000U
+#define RCC_PLLCFGR_PLLP_1 0x00020000U
+
+#define RCC_PLLCFGR_PLLSRC 0x00400000U
+#define RCC_PLLCFGR_PLLSRC_HSE 0x00400000U
+#define RCC_PLLCFGR_PLLSRC_HSI 0x00000000U
+
+#define RCC_PLLCFGR_PLLQ 0x0F000000U
+#define RCC_PLLCFGR_PLLQ_0 0x01000000U
+#define RCC_PLLCFGR_PLLQ_1 0x02000000U
+#define RCC_PLLCFGR_PLLQ_2 0x04000000U
+#define RCC_PLLCFGR_PLLQ_3 0x08000000U
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW 0x00000003U /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 0x00000001U /*!< Bit 0 */
+#define RCC_CFGR_SW_1 0x00000002U /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS 0x0000000CU /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 0x00000004U /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 0x00000008U /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE 0x000000F0U /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 0x00000010U /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 0x00000020U /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 0x00000040U /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 0x00000080U /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 0x00001C00U /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 0x00000400U /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 0x00000800U /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 0x00001000U /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 0x00001000U /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 0x00001400U /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 0x00001800U /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 0x00001C00U /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 0x0000E000U /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 0x00002000U /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 0x00004000U /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 0x00008000U /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 0x00008000U /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 0x0000A000U /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 0x0000C000U /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 0x0000E000U /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define RCC_CFGR_RTCPRE 0x001F0000U
+#define RCC_CFGR_RTCPRE_0 0x00010000U
+#define RCC_CFGR_RTCPRE_1 0x00020000U
+#define RCC_CFGR_RTCPRE_2 0x00040000U
+#define RCC_CFGR_RTCPRE_3 0x00080000U
+#define RCC_CFGR_RTCPRE_4 0x00100000U
+
+/*!< MCO1 configuration */
+#define RCC_CFGR_MCO1 0x00600000U
+#define RCC_CFGR_MCO1_0 0x00200000U
+#define RCC_CFGR_MCO1_1 0x00400000U
+
+#define RCC_CFGR_I2SSRC 0x00800000U
+
+#define RCC_CFGR_MCO1PRE 0x07000000U
+#define RCC_CFGR_MCO1PRE_0 0x01000000U
+#define RCC_CFGR_MCO1PRE_1 0x02000000U
+#define RCC_CFGR_MCO1PRE_2 0x04000000U
+
+#define RCC_CFGR_MCO2PRE 0x38000000U
+#define RCC_CFGR_MCO2PRE_0 0x08000000U
+#define RCC_CFGR_MCO2PRE_1 0x10000000U
+#define RCC_CFGR_MCO2PRE_2 0x20000000U
+
+#define RCC_CFGR_MCO2 0xC0000000U
+#define RCC_CFGR_MCO2_0 0x40000000U
+#define RCC_CFGR_MCO2_1 0x80000000U
+
+/******************** Bit definition for RCC_CIR register *******************/
+#define RCC_CIR_LSIRDYF 0x00000001U
+#define RCC_CIR_LSERDYF 0x00000002U
+#define RCC_CIR_HSIRDYF 0x00000004U
+#define RCC_CIR_HSERDYF 0x00000008U
+#define RCC_CIR_PLLRDYF 0x00000010U
+#define RCC_CIR_PLLI2SRDYF 0x00000020U
+
+#define RCC_CIR_CSSF 0x00000080U
+#define RCC_CIR_LSIRDYIE 0x00000100U
+#define RCC_CIR_LSERDYIE 0x00000200U
+#define RCC_CIR_HSIRDYIE 0x00000400U
+#define RCC_CIR_HSERDYIE 0x00000800U
+#define RCC_CIR_PLLRDYIE 0x00001000U
+#define RCC_CIR_PLLI2SRDYIE 0x00002000U
+
+#define RCC_CIR_LSIRDYC 0x00010000U
+#define RCC_CIR_LSERDYC 0x00020000U
+#define RCC_CIR_HSIRDYC 0x00040000U
+#define RCC_CIR_HSERDYC 0x00080000U
+#define RCC_CIR_PLLRDYC 0x00100000U
+#define RCC_CIR_PLLI2SRDYC 0x00200000U
+
+#define RCC_CIR_CSSC 0x00800000U
+
+/******************** Bit definition for RCC_AHB1RSTR register **************/
+#define RCC_AHB1RSTR_GPIOARST 0x00000001U
+#define RCC_AHB1RSTR_GPIOBRST 0x00000002U
+#define RCC_AHB1RSTR_GPIOCRST 0x00000004U
+#define RCC_AHB1RSTR_GPIODRST 0x00000008U
+#define RCC_AHB1RSTR_GPIOERST 0x00000010U
+#define RCC_AHB1RSTR_GPIOHRST 0x00000080U
+#define RCC_AHB1RSTR_CRCRST 0x00001000U
+#define RCC_AHB1RSTR_DMA1RST 0x00200000U
+#define RCC_AHB1RSTR_DMA2RST 0x00400000U
+
+/******************** Bit definition for RCC_AHB2RSTR register **************/
+#define RCC_AHB2RSTR_OTGFSRST 0x00000080U
+
+/******************** Bit definition for RCC_AHB3RSTR register **************/
+
+/******************** Bit definition for RCC_APB1RSTR register **************/
+#define RCC_APB1RSTR_TIM2RST 0x00000001U
+#define RCC_APB1RSTR_TIM3RST 0x00000002U
+#define RCC_APB1RSTR_TIM4RST 0x00000004U
+#define RCC_APB1RSTR_TIM5RST 0x00000008U
+#define RCC_APB1RSTR_WWDGRST 0x00000800U
+#define RCC_APB1RSTR_SPI2RST 0x00004000U
+#define RCC_APB1RSTR_SPI3RST 0x00008000U
+#define RCC_APB1RSTR_USART2RST 0x00020000U
+#define RCC_APB1RSTR_I2C1RST 0x00200000U
+#define RCC_APB1RSTR_I2C2RST 0x00400000U
+#define RCC_APB1RSTR_I2C3RST 0x00800000U
+#define RCC_APB1RSTR_PWRRST 0x10000000U
+
+/******************** Bit definition for RCC_APB2RSTR register **************/
+#define RCC_APB2RSTR_TIM1RST 0x00000001U
+#define RCC_APB2RSTR_USART1RST 0x00000010U
+#define RCC_APB2RSTR_USART6RST 0x00000020U
+#define RCC_APB2RSTR_ADCRST 0x00000100U
+#define RCC_APB2RSTR_SDIORST 0x00000800U
+#define RCC_APB2RSTR_SPI1RST 0x00001000U
+#define RCC_APB2RSTR_SPI4RST 0x00002000U
+#define RCC_APB2RSTR_SYSCFGRST 0x00004000U
+#define RCC_APB2RSTR_TIM9RST 0x00010000U
+#define RCC_APB2RSTR_TIM10RST 0x00020000U
+#define RCC_APB2RSTR_TIM11RST 0x00040000U
+
+/* Old SPI1RST bit definition, maintained for legacy purpose */
+#define RCC_APB2RSTR_SPI1 RCC_APB2RSTR_SPI1RST
+
+/******************** Bit definition for RCC_AHB1ENR register ***************/
+#define RCC_AHB1ENR_GPIOAEN 0x00000001U
+#define RCC_AHB1ENR_GPIOBEN 0x00000002U
+#define RCC_AHB1ENR_GPIOCEN 0x00000004U
+#define RCC_AHB1ENR_GPIODEN 0x00000008U
+#define RCC_AHB1ENR_GPIOEEN 0x00000010U
+#define RCC_AHB1ENR_GPIOHEN 0x00000080U
+#define RCC_AHB1ENR_CRCEN 0x00001000U
+#define RCC_AHB1ENR_BKPSRAMEN 0x00040000U
+#define RCC_AHB1ENR_DMA1EN 0x00200000U
+#define RCC_AHB1ENR_DMA2EN 0x00400000U
+
+/******************** Bit definition for RCC_AHB2ENR register ***************/
+#define RCC_AHB2ENR_OTGFSEN 0x00000080U
+
+/******************** Bit definition for RCC_AHB3ENR register ***************/
+
+/******************** Bit definition for RCC_APB1ENR register ***************/
+#define RCC_APB1ENR_TIM2EN 0x00000001U
+#define RCC_APB1ENR_TIM3EN 0x00000002U
+#define RCC_APB1ENR_TIM4EN 0x00000004U
+#define RCC_APB1ENR_TIM5EN 0x00000008U
+#define RCC_APB1ENR_WWDGEN 0x00000800U
+#define RCC_APB1ENR_SPI2EN 0x00004000U
+#define RCC_APB1ENR_SPI3EN 0x00008000U
+#define RCC_APB1ENR_USART2EN 0x00020000U
+#define RCC_APB1ENR_I2C1EN 0x00200000U
+#define RCC_APB1ENR_I2C2EN 0x00400000U
+#define RCC_APB1ENR_I2C3EN 0x00800000U
+#define RCC_APB1ENR_PWREN 0x10000000U
+
+/******************** Bit definition for RCC_APB2ENR register ***************/
+#define RCC_APB2ENR_TIM1EN 0x00000001U
+#define RCC_APB2ENR_USART1EN 0x00000010U
+#define RCC_APB2ENR_USART6EN 0x00000020U
+#define RCC_APB2ENR_ADC1EN 0x00000100U
+#define RCC_APB2ENR_SDIOEN 0x00000800U
+#define RCC_APB2ENR_SPI1EN 0x00001000U
+#define RCC_APB2ENR_SPI4EN 0x00002000U
+#define RCC_APB2ENR_SYSCFGEN 0x00004000U
+#define RCC_APB2ENR_TIM9EN 0x00010000U
+#define RCC_APB2ENR_TIM10EN 0x00020000U
+#define RCC_APB2ENR_TIM11EN 0x00040000U
+
+/******************** Bit definition for RCC_AHB1LPENR register *************/
+#define RCC_AHB1LPENR_GPIOALPEN 0x00000001U
+#define RCC_AHB1LPENR_GPIOBLPEN 0x00000002U
+#define RCC_AHB1LPENR_GPIOCLPEN 0x00000004U
+#define RCC_AHB1LPENR_GPIODLPEN 0x00000008U
+#define RCC_AHB1LPENR_GPIOELPEN 0x00000010U
+#define RCC_AHB1LPENR_GPIOHLPEN 0x00000080U
+#define RCC_AHB1LPENR_CRCLPEN 0x00001000U
+#define RCC_AHB1LPENR_FLITFLPEN 0x00008000U
+#define RCC_AHB1LPENR_SRAM1LPEN 0x00010000U
+#define RCC_AHB1LPENR_SRAM2LPEN 0x00020000U
+#define RCC_AHB1LPENR_BKPSRAMLPEN 0x00040000U
+#define RCC_AHB1LPENR_DMA1LPEN 0x00200000U
+#define RCC_AHB1LPENR_DMA2LPEN 0x00400000U
+
+/******************** Bit definition for RCC_AHB2LPENR register *************/
+#define RCC_AHB2LPENR_OTGFSLPEN 0x00000080U
+
+/******************** Bit definition for RCC_AHB3LPENR register *************/
+
+/******************** Bit definition for RCC_APB1LPENR register *************/
+#define RCC_APB1LPENR_TIM2LPEN 0x00000001U
+#define RCC_APB1LPENR_TIM3LPEN 0x00000002U
+#define RCC_APB1LPENR_TIM4LPEN 0x00000004U
+#define RCC_APB1LPENR_TIM5LPEN 0x00000008U
+#define RCC_APB1LPENR_WWDGLPEN 0x00000800U
+#define RCC_APB1LPENR_SPI2LPEN 0x00004000U
+#define RCC_APB1LPENR_SPI3LPEN 0x00008000U
+#define RCC_APB1LPENR_USART2LPEN 0x00020000U
+#define RCC_APB1LPENR_I2C1LPEN 0x00200000U
+#define RCC_APB1LPENR_I2C2LPEN 0x00400000U
+#define RCC_APB1LPENR_I2C3LPEN 0x00800000U
+#define RCC_APB1LPENR_PWRLPEN 0x10000000U
+#define RCC_APB1LPENR_DACLPEN 0x20000000U
+
+/******************** Bit definition for RCC_APB2LPENR register *************/
+#define RCC_APB2LPENR_TIM1LPEN 0x00000001U
+#define RCC_APB2LPENR_USART1LPEN 0x00000010U
+#define RCC_APB2LPENR_USART6LPEN 0x00000020U
+#define RCC_APB2LPENR_ADC1LPEN 0x00000100U
+#define RCC_APB2LPENR_SDIOLPEN 0x00000800U
+#define RCC_APB2LPENR_SPI1LPEN 0x00001000U
+#define RCC_APB2LPENR_SPI4LPEN 0x00002000U
+#define RCC_APB2LPENR_SYSCFGLPEN 0x00004000U
+#define RCC_APB2LPENR_TIM9LPEN 0x00010000U
+#define RCC_APB2LPENR_TIM10LPEN 0x00020000U
+#define RCC_APB2LPENR_TIM11LPEN 0x00040000U
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON 0x00000001U
+#define RCC_BDCR_LSERDY 0x00000002U
+#define RCC_BDCR_LSEBYP 0x00000004U
+
+#define RCC_BDCR_RTCSEL 0x00000300U
+#define RCC_BDCR_RTCSEL_0 0x00000100U
+#define RCC_BDCR_RTCSEL_1 0x00000200U
+
+#define RCC_BDCR_RTCEN 0x00008000U
+#define RCC_BDCR_BDRST 0x00010000U
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION 0x00000001U
+#define RCC_CSR_LSIRDY 0x00000002U
+#define RCC_CSR_RMVF 0x01000000U
+#define RCC_CSR_BORRSTF 0x02000000U
+#define RCC_CSR_PADRSTF 0x04000000U
+#define RCC_CSR_PORRSTF 0x08000000U
+#define RCC_CSR_SFTRSTF 0x10000000U
+#define RCC_CSR_WDGRSTF 0x20000000U
+#define RCC_CSR_WWDGRSTF 0x40000000U
+#define RCC_CSR_LPWRRSTF 0x80000000U
+
+/******************** Bit definition for RCC_SSCGR register *****************/
+#define RCC_SSCGR_MODPER 0x00001FFFU
+#define RCC_SSCGR_INCSTEP 0x0FFFE000U
+#define RCC_SSCGR_SPREADSEL 0x40000000U
+#define RCC_SSCGR_SSCGEN 0x80000000U
+
+/******************** Bit definition for RCC_PLLI2SCFGR register ************/
+#define RCC_PLLI2SCFGR_PLLI2SN 0x00007FC0U
+#define RCC_PLLI2SCFGR_PLLI2SN_0 0x00000040U
+#define RCC_PLLI2SCFGR_PLLI2SN_1 0x00000080U
+#define RCC_PLLI2SCFGR_PLLI2SN_2 0x00000100U
+#define RCC_PLLI2SCFGR_PLLI2SN_3 0x00000200U
+#define RCC_PLLI2SCFGR_PLLI2SN_4 0x00000400U
+#define RCC_PLLI2SCFGR_PLLI2SN_5 0x00000800U
+#define RCC_PLLI2SCFGR_PLLI2SN_6 0x00001000U
+#define RCC_PLLI2SCFGR_PLLI2SN_7 0x00002000U
+#define RCC_PLLI2SCFGR_PLLI2SN_8 0x00004000U
+
+#define RCC_PLLI2SCFGR_PLLI2SR 0x70000000U
+#define RCC_PLLI2SCFGR_PLLI2SR_0 0x10000000U
+#define RCC_PLLI2SCFGR_PLLI2SR_1 0x20000000U
+#define RCC_PLLI2SCFGR_PLLI2SR_2 0x40000000U
+
+/******************** Bit definition for RCC_DCKCFGR register ***************/
+#define RCC_DCKCFGR_TIMPRE 0x01000000U
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM 0x00400000U
+#define RTC_TR_HT 0x00300000U
+#define RTC_TR_HT_0 0x00100000U
+#define RTC_TR_HT_1 0x00200000U
+#define RTC_TR_HU 0x000F0000U
+#define RTC_TR_HU_0 0x00010000U
+#define RTC_TR_HU_1 0x00020000U
+#define RTC_TR_HU_2 0x00040000U
+#define RTC_TR_HU_3 0x00080000U
+#define RTC_TR_MNT 0x00007000U
+#define RTC_TR_MNT_0 0x00001000U
+#define RTC_TR_MNT_1 0x00002000U
+#define RTC_TR_MNT_2 0x00004000U
+#define RTC_TR_MNU 0x00000F00U
+#define RTC_TR_MNU_0 0x00000100U
+#define RTC_TR_MNU_1 0x00000200U
+#define RTC_TR_MNU_2 0x00000400U
+#define RTC_TR_MNU_3 0x00000800U
+#define RTC_TR_ST 0x00000070U
+#define RTC_TR_ST_0 0x00000010U
+#define RTC_TR_ST_1 0x00000020U
+#define RTC_TR_ST_2 0x00000040U
+#define RTC_TR_SU 0x0000000FU
+#define RTC_TR_SU_0 0x00000001U
+#define RTC_TR_SU_1 0x00000002U
+#define RTC_TR_SU_2 0x00000004U
+#define RTC_TR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT 0x00F00000U
+#define RTC_DR_YT_0 0x00100000U
+#define RTC_DR_YT_1 0x00200000U
+#define RTC_DR_YT_2 0x00400000U
+#define RTC_DR_YT_3 0x00800000U
+#define RTC_DR_YU 0x000F0000U
+#define RTC_DR_YU_0 0x00010000U
+#define RTC_DR_YU_1 0x00020000U
+#define RTC_DR_YU_2 0x00040000U
+#define RTC_DR_YU_3 0x00080000U
+#define RTC_DR_WDU 0x0000E000U
+#define RTC_DR_WDU_0 0x00002000U
+#define RTC_DR_WDU_1 0x00004000U
+#define RTC_DR_WDU_2 0x00008000U
+#define RTC_DR_MT 0x00001000U
+#define RTC_DR_MU 0x00000F00U
+#define RTC_DR_MU_0 0x00000100U
+#define RTC_DR_MU_1 0x00000200U
+#define RTC_DR_MU_2 0x00000400U
+#define RTC_DR_MU_3 0x00000800U
+#define RTC_DR_DT 0x00000030U
+#define RTC_DR_DT_0 0x00000010U
+#define RTC_DR_DT_1 0x00000020U
+#define RTC_DR_DU 0x0000000FU
+#define RTC_DR_DU_0 0x00000001U
+#define RTC_DR_DU_1 0x00000002U
+#define RTC_DR_DU_2 0x00000004U
+#define RTC_DR_DU_3 0x00000008U
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE 0x00800000U
+#define RTC_CR_OSEL 0x00600000U
+#define RTC_CR_OSEL_0 0x00200000U
+#define RTC_CR_OSEL_1 0x00400000U
+#define RTC_CR_POL 0x00100000U
+#define RTC_CR_COSEL 0x00080000U
+#define RTC_CR_BCK 0x00040000U
+#define RTC_CR_SUB1H 0x00020000U
+#define RTC_CR_ADD1H 0x00010000U
+#define RTC_CR_TSIE 0x00008000U
+#define RTC_CR_WUTIE 0x00004000U
+#define RTC_CR_ALRBIE 0x00002000U
+#define RTC_CR_ALRAIE 0x00001000U
+#define RTC_CR_TSE 0x00000800U
+#define RTC_CR_WUTE 0x00000400U
+#define RTC_CR_ALRBE 0x00000200U
+#define RTC_CR_ALRAE 0x00000100U
+#define RTC_CR_DCE 0x00000080U
+#define RTC_CR_FMT 0x00000040U
+#define RTC_CR_BYPSHAD 0x00000020U
+#define RTC_CR_REFCKON 0x00000010U
+#define RTC_CR_TSEDGE 0x00000008U
+#define RTC_CR_WUCKSEL 0x00000007U
+#define RTC_CR_WUCKSEL_0 0x00000001U
+#define RTC_CR_WUCKSEL_1 0x00000002U
+#define RTC_CR_WUCKSEL_2 0x00000004U
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF 0x00010000U
+#define RTC_ISR_TAMP1F 0x00002000U
+#define RTC_ISR_TAMP2F 0x00004000U
+#define RTC_ISR_TSOVF 0x00001000U
+#define RTC_ISR_TSF 0x00000800U
+#define RTC_ISR_WUTF 0x00000400U
+#define RTC_ISR_ALRBF 0x00000200U
+#define RTC_ISR_ALRAF 0x00000100U
+#define RTC_ISR_INIT 0x00000080U
+#define RTC_ISR_INITF 0x00000040U
+#define RTC_ISR_RSF 0x00000020U
+#define RTC_ISR_INITS 0x00000010U
+#define RTC_ISR_SHPF 0x00000008U
+#define RTC_ISR_WUTWF 0x00000004U
+#define RTC_ISR_ALRBWF 0x00000002U
+#define RTC_ISR_ALRAWF 0x00000001U
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A 0x007F0000U
+#define RTC_PRER_PREDIV_S 0x00007FFFU
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT 0x0000FFFFU
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS 0x00000080U
+#define RTC_CALIBR_DC 0x0000001FU
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 0x80000000U
+#define RTC_ALRMAR_WDSEL 0x40000000U
+#define RTC_ALRMAR_DT 0x30000000U
+#define RTC_ALRMAR_DT_0 0x10000000U
+#define RTC_ALRMAR_DT_1 0x20000000U
+#define RTC_ALRMAR_DU 0x0F000000U
+#define RTC_ALRMAR_DU_0 0x01000000U
+#define RTC_ALRMAR_DU_1 0x02000000U
+#define RTC_ALRMAR_DU_2 0x04000000U
+#define RTC_ALRMAR_DU_3 0x08000000U
+#define RTC_ALRMAR_MSK3 0x00800000U
+#define RTC_ALRMAR_PM 0x00400000U
+#define RTC_ALRMAR_HT 0x00300000U
+#define RTC_ALRMAR_HT_0 0x00100000U
+#define RTC_ALRMAR_HT_1 0x00200000U
+#define RTC_ALRMAR_HU 0x000F0000U
+#define RTC_ALRMAR_HU_0 0x00010000U
+#define RTC_ALRMAR_HU_1 0x00020000U
+#define RTC_ALRMAR_HU_2 0x00040000U
+#define RTC_ALRMAR_HU_3 0x00080000U
+#define RTC_ALRMAR_MSK2 0x00008000U
+#define RTC_ALRMAR_MNT 0x00007000U
+#define RTC_ALRMAR_MNT_0 0x00001000U
+#define RTC_ALRMAR_MNT_1 0x00002000U
+#define RTC_ALRMAR_MNT_2 0x00004000U
+#define RTC_ALRMAR_MNU 0x00000F00U
+#define RTC_ALRMAR_MNU_0 0x00000100U
+#define RTC_ALRMAR_MNU_1 0x00000200U
+#define RTC_ALRMAR_MNU_2 0x00000400U
+#define RTC_ALRMAR_MNU_3 0x00000800U
+#define RTC_ALRMAR_MSK1 0x00000080U
+#define RTC_ALRMAR_ST 0x00000070U
+#define RTC_ALRMAR_ST_0 0x00000010U
+#define RTC_ALRMAR_ST_1 0x00000020U
+#define RTC_ALRMAR_ST_2 0x00000040U
+#define RTC_ALRMAR_SU 0x0000000FU
+#define RTC_ALRMAR_SU_0 0x00000001U
+#define RTC_ALRMAR_SU_1 0x00000002U
+#define RTC_ALRMAR_SU_2 0x00000004U
+#define RTC_ALRMAR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 0x80000000U
+#define RTC_ALRMBR_WDSEL 0x40000000U
+#define RTC_ALRMBR_DT 0x30000000U
+#define RTC_ALRMBR_DT_0 0x10000000U
+#define RTC_ALRMBR_DT_1 0x20000000U
+#define RTC_ALRMBR_DU 0x0F000000U
+#define RTC_ALRMBR_DU_0 0x01000000U
+#define RTC_ALRMBR_DU_1 0x02000000U
+#define RTC_ALRMBR_DU_2 0x04000000U
+#define RTC_ALRMBR_DU_3 0x08000000U
+#define RTC_ALRMBR_MSK3 0x00800000U
+#define RTC_ALRMBR_PM 0x00400000U
+#define RTC_ALRMBR_HT 0x00300000U
+#define RTC_ALRMBR_HT_0 0x00100000U
+#define RTC_ALRMBR_HT_1 0x00200000U
+#define RTC_ALRMBR_HU 0x000F0000U
+#define RTC_ALRMBR_HU_0 0x00010000U
+#define RTC_ALRMBR_HU_1 0x00020000U
+#define RTC_ALRMBR_HU_2 0x00040000U
+#define RTC_ALRMBR_HU_3 0x00080000U
+#define RTC_ALRMBR_MSK2 0x00008000U
+#define RTC_ALRMBR_MNT 0x00007000U
+#define RTC_ALRMBR_MNT_0 0x00001000U
+#define RTC_ALRMBR_MNT_1 0x00002000U
+#define RTC_ALRMBR_MNT_2 0x00004000U
+#define RTC_ALRMBR_MNU 0x00000F00U
+#define RTC_ALRMBR_MNU_0 0x00000100U
+#define RTC_ALRMBR_MNU_1 0x00000200U
+#define RTC_ALRMBR_MNU_2 0x00000400U
+#define RTC_ALRMBR_MNU_3 0x00000800U
+#define RTC_ALRMBR_MSK1 0x00000080U
+#define RTC_ALRMBR_ST 0x00000070U
+#define RTC_ALRMBR_ST_0 0x00000010U
+#define RTC_ALRMBR_ST_1 0x00000020U
+#define RTC_ALRMBR_ST_2 0x00000040U
+#define RTC_ALRMBR_SU 0x0000000FU
+#define RTC_ALRMBR_SU_0 0x00000001U
+#define RTC_ALRMBR_SU_1 0x00000002U
+#define RTC_ALRMBR_SU_2 0x00000004U
+#define RTC_ALRMBR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY 0x000000FFU
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS 0x0000FFFFU
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS 0x00007FFFU
+#define RTC_SHIFTR_ADD1S 0x80000000U
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM 0x00400000U
+#define RTC_TSTR_HT 0x00300000U
+#define RTC_TSTR_HT_0 0x00100000U
+#define RTC_TSTR_HT_1 0x00200000U
+#define RTC_TSTR_HU 0x000F0000U
+#define RTC_TSTR_HU_0 0x00010000U
+#define RTC_TSTR_HU_1 0x00020000U
+#define RTC_TSTR_HU_2 0x00040000U
+#define RTC_TSTR_HU_3 0x00080000U
+#define RTC_TSTR_MNT 0x00007000U
+#define RTC_TSTR_MNT_0 0x00001000U
+#define RTC_TSTR_MNT_1 0x00002000U
+#define RTC_TSTR_MNT_2 0x00004000U
+#define RTC_TSTR_MNU 0x00000F00U
+#define RTC_TSTR_MNU_0 0x00000100U
+#define RTC_TSTR_MNU_1 0x00000200U
+#define RTC_TSTR_MNU_2 0x00000400U
+#define RTC_TSTR_MNU_3 0x00000800U
+#define RTC_TSTR_ST 0x00000070U
+#define RTC_TSTR_ST_0 0x00000010U
+#define RTC_TSTR_ST_1 0x00000020U
+#define RTC_TSTR_ST_2 0x00000040U
+#define RTC_TSTR_SU 0x0000000FU
+#define RTC_TSTR_SU_0 0x00000001U
+#define RTC_TSTR_SU_1 0x00000002U
+#define RTC_TSTR_SU_2 0x00000004U
+#define RTC_TSTR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU 0x0000E000U
+#define RTC_TSDR_WDU_0 0x00002000U
+#define RTC_TSDR_WDU_1 0x00004000U
+#define RTC_TSDR_WDU_2 0x00008000U
+#define RTC_TSDR_MT 0x00001000U
+#define RTC_TSDR_MU 0x00000F00U
+#define RTC_TSDR_MU_0 0x00000100U
+#define RTC_TSDR_MU_1 0x00000200U
+#define RTC_TSDR_MU_2 0x00000400U
+#define RTC_TSDR_MU_3 0x00000800U
+#define RTC_TSDR_DT 0x00000030U
+#define RTC_TSDR_DT_0 0x00000010U
+#define RTC_TSDR_DT_1 0x00000020U
+#define RTC_TSDR_DU 0x0000000FU
+#define RTC_TSDR_DU_0 0x00000001U
+#define RTC_TSDR_DU_1 0x00000002U
+#define RTC_TSDR_DU_2 0x00000004U
+#define RTC_TSDR_DU_3 0x00000008U
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS 0x0000FFFFU
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP 0x00008000U
+#define RTC_CALR_CALW8 0x00004000U
+#define RTC_CALR_CALW16 0x00002000U
+#define RTC_CALR_CALM 0x000001FFU
+#define RTC_CALR_CALM_0 0x00000001U
+#define RTC_CALR_CALM_1 0x00000002U
+#define RTC_CALR_CALM_2 0x00000004U
+#define RTC_CALR_CALM_3 0x00000008U
+#define RTC_CALR_CALM_4 0x00000010U
+#define RTC_CALR_CALM_5 0x00000020U
+#define RTC_CALR_CALM_6 0x00000040U
+#define RTC_CALR_CALM_7 0x00000080U
+#define RTC_CALR_CALM_8 0x00000100U
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE 0x00040000U
+#define RTC_TAFCR_TSINSEL 0x00020000U
+#define RTC_TAFCR_TAMPINSEL 0x00010000U
+#define RTC_TAFCR_TAMPPUDIS 0x00008000U
+#define RTC_TAFCR_TAMPPRCH 0x00006000U
+#define RTC_TAFCR_TAMPPRCH_0 0x00002000U
+#define RTC_TAFCR_TAMPPRCH_1 0x00004000U
+#define RTC_TAFCR_TAMPFLT 0x00001800U
+#define RTC_TAFCR_TAMPFLT_0 0x00000800U
+#define RTC_TAFCR_TAMPFLT_1 0x00001000U
+#define RTC_TAFCR_TAMPFREQ 0x00000700U
+#define RTC_TAFCR_TAMPFREQ_0 0x00000100U
+#define RTC_TAFCR_TAMPFREQ_1 0x00000200U
+#define RTC_TAFCR_TAMPFREQ_2 0x00000400U
+#define RTC_TAFCR_TAMPTS 0x00000080U
+#define RTC_TAFCR_TAMP2TRG 0x00000010U
+#define RTC_TAFCR_TAMP2E 0x00000008U
+#define RTC_TAFCR_TAMPIE 0x00000004U
+#define RTC_TAFCR_TAMP1TRG 0x00000002U
+#define RTC_TAFCR_TAMP1E 0x00000001U
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS 0x0F000000U
+#define RTC_ALRMASSR_MASKSS_0 0x01000000U
+#define RTC_ALRMASSR_MASKSS_1 0x02000000U
+#define RTC_ALRMASSR_MASKSS_2 0x04000000U
+#define RTC_ALRMASSR_MASKSS_3 0x08000000U
+#define RTC_ALRMASSR_SS 0x00007FFFU
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS 0x0F000000U
+#define RTC_ALRMBSSR_MASKSS_0 0x01000000U
+#define RTC_ALRMBSSR_MASKSS_1 0x02000000U
+#define RTC_ALRMBSSR_MASKSS_2 0x04000000U
+#define RTC_ALRMBSSR_MASKSS_3 0x08000000U
+#define RTC_ALRMBSSR_SS 0x00007FFFU
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R 0xFFFFFFFFU
+
+
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL 0x03U /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 0x01U /*!<Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 0x02U /*!<Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV 0x00FFU /*!<Clock divide factor */
+#define SDIO_CLKCR_CLKEN 0x0100U /*!<Clock enable bit */
+#define SDIO_CLKCR_PWRSAV 0x0200U /*!<Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS 0x0400U /*!<Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS 0x1800U /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 0x0800U /*!<Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 0x1000U /*!<Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE 0x2000U /*!<SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN 0x4000U /*!<HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG 0xFFFFFFFFU /*!<Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX 0x003FU /*!<Command Index */
+
+#define SDIO_CMD_WAITRESP 0x00C0U /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 0x0040U /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 0x0080U /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT 0x0100U /*!<CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND 0x0200U /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN 0x0400U /*!<Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND 0x0800U /*!<SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL 0x1000U /*!<Enable CMD completion */
+#define SDIO_CMD_NIEN 0x2000U /*!<Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD 0x4000U /*!<CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD 0x3FU /*!<Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME 0xFFFFFFFFU /*!<Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH 0x01FFFFFFU /*!<Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN 0x0001U /*!<Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR 0x0002U /*!<Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE 0x0004U /*!<Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN 0x0008U /*!<DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE 0x00F0U /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 0x0010U /*!<Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 0x0020U /*!<Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 0x0040U /*!<Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 0x0080U /*!<Bit 3 */
+
+#define SDIO_DCTRL_RWSTART 0x0100U /*!<Read wait start */
+#define SDIO_DCTRL_RWSTOP 0x0200U /*!<Read wait stop */
+#define SDIO_DCTRL_RWMOD 0x0400U /*!<Read wait mode */
+#define SDIO_DCTRL_SDIOEN 0x0800U /*!<SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT 0x01FFFFFFU /*!<Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL 0x00000001U /*!<Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL 0x00000002U /*!<Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT 0x00000004U /*!<Command response timeout */
+#define SDIO_STA_DTIMEOUT 0x00000008U /*!<Data timeout */
+#define SDIO_STA_TXUNDERR 0x00000010U /*!<Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR 0x00000020U /*!<Received FIFO overrun error */
+#define SDIO_STA_CMDREND 0x00000040U /*!<Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT 0x00000080U /*!<Command sent (no response required) */
+#define SDIO_STA_DATAEND 0x00000100U /*!<Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR 0x00000200U /*!<Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND 0x00000400U /*!<Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT 0x00000800U /*!<Command transfer in progress */
+#define SDIO_STA_TXACT 0x00001000U /*!<Data transmit in progress */
+#define SDIO_STA_RXACT 0x00002000U /*!<Data receive in progress */
+#define SDIO_STA_TXFIFOHE 0x00004000U /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF 0x00008000U /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF 0x00010000U /*!<Transmit FIFO full */
+#define SDIO_STA_RXFIFOF 0x00020000U /*!<Receive FIFO full */
+#define SDIO_STA_TXFIFOE 0x00040000U /*!<Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE 0x00080000U /*!<Receive FIFO empty */
+#define SDIO_STA_TXDAVL 0x00100000U /*!<Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL 0x00200000U /*!<Data available in receive FIFO */
+#define SDIO_STA_SDIOIT 0x00400000U /*!<SDIO interrupt received */
+#define SDIO_STA_CEATAEND 0x00800000U /*!<CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC 0x00000001U /*!<CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC 0x00000002U /*!<DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC 0x00000004U /*!<CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC 0x00000008U /*!<DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC 0x00000010U /*!<TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC 0x00000020U /*!<RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC 0x00000040U /*!<CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC 0x00000080U /*!<CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC 0x00000100U /*!<DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC 0x00000200U /*!<STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC 0x00000400U /*!<DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC 0x00400000U /*!<SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC 0x00800000U /*!<CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE 0x00000001U /*!<Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE 0x00000002U /*!<Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE 0x00000004U /*!<Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE 0x00000008U /*!<Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE 0x00000010U /*!<Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE 0x00000020U /*!<Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE 0x00000040U /*!<Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE 0x00000080U /*!<Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE 0x00000100U /*!<Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE 0x00000200U /*!<Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE 0x00000400U /*!<Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE 0x00000800U /*!<CCommand Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE 0x00001000U /*!<Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE 0x00002000U /*!<Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE 0x00004000U /*!<Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE 0x00008000U /*!<Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE 0x00010000U /*!<Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE 0x00020000U /*!<Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE 0x00040000U /*!<Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE 0x00080000U /*!<Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE 0x00100000U /*!<Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE 0x00200000U /*!<Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE 0x00400000U /*!<SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE 0x00800000U /*!<CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT 0x00FFFFFFU /*!<Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA 0xFFFFFFFFU /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA 0x00000001U /*!<Clock Phase */
+#define SPI_CR1_CPOL 0x00000002U /*!<Clock Polarity */
+#define SPI_CR1_MSTR 0x00000004U /*!<Master Selection */
+
+#define SPI_CR1_BR 0x00000038U /*!<BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 0x00000008U /*!<Bit 0 */
+#define SPI_CR1_BR_1 0x00000010U /*!<Bit 1 */
+#define SPI_CR1_BR_2 0x00000020U /*!<Bit 2 */
+
+#define SPI_CR1_SPE 0x00000040U /*!<SPI Enable */
+#define SPI_CR1_LSBFIRST 0x00000080U /*!<Frame Format */
+#define SPI_CR1_SSI 0x00000100U /*!<Internal slave select */
+#define SPI_CR1_SSM 0x00000200U /*!<Software slave management */
+#define SPI_CR1_RXONLY 0x00000400U /*!<Receive only */
+#define SPI_CR1_DFF 0x00000800U /*!<Data Frame Format */
+#define SPI_CR1_CRCNEXT 0x00001000U /*!<Transmit CRC next */
+#define SPI_CR1_CRCEN 0x00002000U /*!<Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE 0x00004000U /*!<Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE 0x00008000U /*!<Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN 0x00000001U /*!<Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN 0x00000002U /*!<Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE 0x00000004U /*!<SS Output Enable */
+#define SPI_CR2_FRF 0x00000010U /*!<Frame Format */
+#define SPI_CR2_ERRIE 0x00000020U /*!<Error Interrupt Enable */
+#define SPI_CR2_RXNEIE 0x00000040U /*!<RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE 0x00000080U /*!<Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE 0x00000001U /*!<Receive buffer Not Empty */
+#define SPI_SR_TXE 0x00000002U /*!<Transmit buffer Empty */
+#define SPI_SR_CHSIDE 0x00000004U /*!<Channel side */
+#define SPI_SR_UDR 0x00000008U /*!<Underrun flag */
+#define SPI_SR_CRCERR 0x00000010U /*!<CRC Error flag */
+#define SPI_SR_MODF 0x00000020U /*!<Mode fault */
+#define SPI_SR_OVR 0x00000040U /*!<Overrun flag */
+#define SPI_SR_BSY 0x00000080U /*!<Busy flag */
+#define SPI_SR_FRE 0x00000100U /*!<Frame format error flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR 0x0000FFFFU /*!<Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY 0x0000FFFFU /*!<CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC 0x0000FFFFU /*!<Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC 0x0000FFFFU /*!<Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN 0x00000001U /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN 0x00000006U /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 0x00000002U /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 0x00000004U /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL 0x00000008U /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD 0x00000030U /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 0x00000010U /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 0x00000020U /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC 0x00000080U /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG 0x00000300U /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 0x00000100U /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 0x00000200U /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE 0x00000400U /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD 0x00000800U /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV 0x000000FFU /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD 0x00000100U /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE 0x00000200U /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* SYSCFG */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SYSCFG_MEMRMP register ***************/
+#define SYSCFG_MEMRMP_MEM_MODE 0x00000007U /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 0x00000001U
+#define SYSCFG_MEMRMP_MEM_MODE_1 0x00000002U
+#define SYSCFG_MEMRMP_MEM_MODE_2 0x00000004U
+
+/****************** Bit definition for SYSCFG_PMC register ******************/
+#define SYSCFG_PMC_ADC1DC2 0x00010000U /*!< Refer to AN4073 on how to use this bit */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 0x000FU /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 0x00F0U /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 0x0F00U /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 0xF000U /*!<EXTI 3 configuration */
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA 0x0000U /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB 0x0001U /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC 0x0002U /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD 0x0003U /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE 0x0004U /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH 0x0007U /*!<PH[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA 0x0000U /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB 0x0010U /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC 0x0020U /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD 0x0030U /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE 0x0040U /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH 0x0070U /*!<PH[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA 0x0000U /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB 0x0100U /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC 0x0200U /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD 0x0300U /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE 0x0400U /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH 0x0700U /*!<PH[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA 0x0000U /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB 0x1000U /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC 0x2000U /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD 0x3000U /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE 0x4000U /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH 0x7000U /*!<PH[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 0x000FU /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 0x00F0U /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 0x0F00U /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 0xF000U /*!<EXTI 7 configuration */
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA 0x0000U /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB 0x0001U /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC 0x0002U /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD 0x0003U /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE 0x0004U /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH 0x0007U /*!<PH[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA 0x0000U /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB 0x0010U /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC 0x0020U /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD 0x0030U /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE 0x0040U /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH 0x0070U /*!<PH[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA 0x0000U /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB 0x0100U /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC 0x0200U /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD 0x0300U /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE 0x0400U /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH 0x0700U /*!<PH[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA 0x0000U /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB 0x1000U /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC 0x2000U /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD 0x3000U /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE 0x4000U /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH 0x7000U /*!<PH[7] pin */
+
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 0x000FU /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 0x00F0U /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 0x0F00U /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 0xF000U /*!<EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA 0x0000U /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB 0x0001U /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC 0x0002U /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD 0x0003U /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE 0x0004U /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH 0x0007U /*!<PH[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA 0x0000U /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB 0x0010U /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC 0x0020U /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD 0x0030U /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE 0x0040U /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH 0x0070U /*!<PH[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA 0x0000U /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB 0x0100U /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC 0x0200U /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD 0x0300U /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE 0x0400U /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH 0x0700U /*!<PH[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA 0x0000U /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB 0x1000U /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC 0x2000U /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD 0x3000U /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE 0x4000U /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH 0x7000U /*!<PH[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register ***************/
+#define SYSCFG_EXTICR4_EXTI12 0x000FU /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 0x00F0U /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 0x0F00U /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 0xF000U /*!<EXTI 15 configuration */
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA 0x0000U /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB 0x0001U /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC 0x0002U /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD 0x0003U /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE 0x0004U /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH 0x0007U /*!<PH[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA 0x0000U /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB 0x0010U /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC 0x0020U /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD 0x0030U /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE 0x0040U /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH 0x0070U /*!<PH[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA 0x0000U /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB 0x0100U /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC 0x0200U /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD 0x0300U /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE 0x0400U /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH 0x0700U /*!<PH[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA 0x0000U /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB 0x1000U /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC 0x2000U /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD 0x3000U /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE 0x4000U /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH 0x7000U /*!<PH[15] pin */
+
+/****************** Bit definition for SYSCFG_CMPCR register ****************/
+#define SYSCFG_CMPCR_CMP_PD 0x00000001U /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY 0x00000100U /*!<Compensation cell power-down */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN 0x0001U /*!<Counter enable */
+#define TIM_CR1_UDIS 0x0002U /*!<Update disable */
+#define TIM_CR1_URS 0x0004U /*!<Update request source */
+#define TIM_CR1_OPM 0x0008U /*!<One pulse mode */
+#define TIM_CR1_DIR 0x0010U /*!<Direction */
+
+#define TIM_CR1_CMS 0x0060U /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 0x0020U /*!<Bit 0 */
+#define TIM_CR1_CMS_1 0x0040U /*!<Bit 1 */
+
+#define TIM_CR1_ARPE 0x0080U /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD 0x0300U /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 0x0100U /*!<Bit 0 */
+#define TIM_CR1_CKD_1 0x0200U /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC 0x0001U /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS 0x0004U /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS 0x0008U /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS 0x0070U /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 0x0010U /*!<Bit 0 */
+#define TIM_CR2_MMS_1 0x0020U /*!<Bit 1 */
+#define TIM_CR2_MMS_2 0x0040U /*!<Bit 2 */
+
+#define TIM_CR2_TI1S 0x0080U /*!<TI1 Selection */
+#define TIM_CR2_OIS1 0x0100U /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N 0x0200U /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 0x0400U /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N 0x0800U /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 0x1000U /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N 0x2000U /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 0x4000U /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS 0x0007U /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 0x0001U /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 0x0002U /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 0x0004U /*!<Bit 2 */
+
+#define TIM_SMCR_TS 0x0070U /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 0x0010U /*!<Bit 0 */
+#define TIM_SMCR_TS_1 0x0020U /*!<Bit 1 */
+#define TIM_SMCR_TS_2 0x0040U /*!<Bit 2 */
+
+#define TIM_SMCR_MSM 0x0080U /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF 0x0F00U /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 0x0100U /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 0x0200U /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 0x0400U /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 0x0800U /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS 0x3000U /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 0x1000U /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 0x2000U /*!<Bit 1 */
+
+#define TIM_SMCR_ECE 0x4000U /*!<External clock enable */
+#define TIM_SMCR_ETP 0x8000U /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE 0x0001U /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE 0x0002U /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE 0x0004U /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE 0x0008U /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE 0x0010U /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE 0x0020U /*!<COM interrupt enable */
+#define TIM_DIER_TIE 0x0040U /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE 0x0080U /*!<Break interrupt enable */
+#define TIM_DIER_UDE 0x0100U /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE 0x0200U /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE 0x0400U /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE 0x0800U /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE 0x1000U /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE 0x2000U /*!<COM DMA request enable */
+#define TIM_DIER_TDE 0x4000U /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF 0x0001U /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF 0x0002U /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF 0x0004U /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF 0x0008U /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF 0x0010U /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF 0x0020U /*!<COM interrupt Flag */
+#define TIM_SR_TIF 0x0040U /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF 0x0080U /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF 0x0200U /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF 0x0400U /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF 0x0800U /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF 0x1000U /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG 0x01U /*!<Update Generation */
+#define TIM_EGR_CC1G 0x02U /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G 0x04U /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G 0x08U /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G 0x10U /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG 0x20U /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG 0x40U /*!<Trigger Generation */
+#define TIM_EGR_BG 0x80U /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S 0x0003U /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 0x0001U /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 0x0002U /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE 0x0004U /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE 0x0008U /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M 0x0070U /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 0x0040U /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE 0x0080U /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S 0x0300U /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 0x0100U /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 0x0200U /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE 0x0400U /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE 0x0800U /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M 0x7000U /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 0x4000U /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE 0x8000U /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC 0x000CU /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 0x0004U /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 0x0008U /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F 0x00F0U /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 0x0040U /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 0x0080U /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC 0x0C00U /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 0x0400U /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 0x0800U /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F 0xF000U /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 0x4000U /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 0x8000U /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S 0x0003U /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 0x0001U /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 0x0002U /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE 0x0004U /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE 0x0008U /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M 0x0070U /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 0x0040U /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE 0x0080U /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S 0x0300U /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 0x0100U /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 0x0200U /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE 0x0400U /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE 0x0800U /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M 0x7000U /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 0x4000U /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE 0x8000U /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC 0x000CU /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 0x0004U /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 0x0008U /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F 0x00F0U /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 0x0040U /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 0x0080U /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC 0x0C00U /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 0x0400U /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 0x0800U /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F 0xF000U /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 0x4000U /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 0x8000U /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E 0x0001U /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P 0x0002U /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE 0x0004U /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP 0x0008U /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E 0x0010U /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P 0x0020U /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE 0x0040U /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP 0x0080U /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E 0x0100U /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P 0x0200U /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE 0x0400U /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP 0x0800U /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E 0x1000U /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P 0x2000U /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP 0x8000U /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT 0xFFFFU /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC 0xFFFFU /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR 0xFFFFU /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP 0xFFU /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 0xFFFFU /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 0xFFFFU /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 0xFFFFU /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 0xFFFFU /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG 0x00FFU /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 0x0001U /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 0x0002U /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 0x0004U /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 0x0008U /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 0x0010U /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 0x0020U /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 0x0040U /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 0x0080U /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK 0x0300U /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 0x0100U /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 0x0200U /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI 0x0400U /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR 0x0800U /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE 0x1000U /*!<Break enable */
+#define TIM_BDTR_BKP 0x2000U /*!<Break Polarity */
+#define TIM_BDTR_AOE 0x4000U /*!<Automatic Output enable */
+#define TIM_BDTR_MOE 0x8000U /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA 0x001FU /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 0x0001U /*!<Bit 0 */
+#define TIM_DCR_DBA_1 0x0002U /*!<Bit 1 */
+#define TIM_DCR_DBA_2 0x0004U /*!<Bit 2 */
+#define TIM_DCR_DBA_3 0x0008U /*!<Bit 3 */
+#define TIM_DCR_DBA_4 0x0010U /*!<Bit 4 */
+
+#define TIM_DCR_DBL 0x1F00U /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 0x0100U /*!<Bit 0 */
+#define TIM_DCR_DBL_1 0x0200U /*!<Bit 1 */
+#define TIM_DCR_DBL_2 0x0400U /*!<Bit 2 */
+#define TIM_DCR_DBL_3 0x0800U /*!<Bit 3 */
+#define TIM_DCR_DBL_4 0x1000U /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB 0xFFFFU /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI4_RMP 0x00C0U /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap) */
+#define TIM_OR_TI4_RMP_0 0x0040U /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1 0x0080U /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP 0x0C00U /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0 0x0400U /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1 0x0800U /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE 0x0001U /*!<Parity Error */
+#define USART_SR_FE 0x0002U /*!<Framing Error */
+#define USART_SR_NE 0x0004U /*!<Noise Error Flag */
+#define USART_SR_ORE 0x0008U /*!<OverRun Error */
+#define USART_SR_IDLE 0x0010U /*!<IDLE line detected */
+#define USART_SR_RXNE 0x0020U /*!<Read Data Register Not Empty */
+#define USART_SR_TC 0x0040U /*!<Transmission Complete */
+#define USART_SR_TXE 0x0080U /*!<Transmit Data Register Empty */
+#define USART_SR_LBD 0x0100U /*!<LIN Break Detection Flag */
+#define USART_SR_CTS 0x0200U /*!<CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR 0x01FFU /*!<Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction 0x000FU /*!<Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa 0xFFF0U /*!<Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK 0x0001U /*!<Send Break */
+#define USART_CR1_RWU 0x0002U /*!<Receiver wakeup */
+#define USART_CR1_RE 0x0004U /*!<Receiver Enable */
+#define USART_CR1_TE 0x0008U /*!<Transmitter Enable */
+#define USART_CR1_IDLEIE 0x0010U /*!<IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE 0x0020U /*!<RXNE Interrupt Enable */
+#define USART_CR1_TCIE 0x0040U /*!<Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE 0x0080U /*!<PE Interrupt Enable */
+#define USART_CR1_PEIE 0x0100U /*!<PE Interrupt Enable */
+#define USART_CR1_PS 0x0200U /*!<Parity Selection */
+#define USART_CR1_PCE 0x0400U /*!<Parity Control Enable */
+#define USART_CR1_WAKE 0x0800U /*!<Wakeup method */
+#define USART_CR1_M 0x1000U /*!<Word length */
+#define USART_CR1_UE 0x2000U /*!<USART Enable */
+#define USART_CR1_OVER8 0x8000U /*!<USART Oversampling by 8 enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD 0x000FU /*!<Address of the USART node */
+#define USART_CR2_LBDL 0x0020U /*!<LIN Break Detection Length */
+#define USART_CR2_LBDIE 0x0040U /*!<LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL 0x0100U /*!<Last Bit Clock pulse */
+#define USART_CR2_CPHA 0x0200U /*!<Clock Phase */
+#define USART_CR2_CPOL 0x0400U /*!<Clock Polarity */
+#define USART_CR2_CLKEN 0x0800U /*!<Clock Enable */
+
+#define USART_CR2_STOP 0x3000U /*!<STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 0x1000U /*!<Bit 0 */
+#define USART_CR2_STOP_1 0x2000U /*!<Bit 1 */
+
+#define USART_CR2_LINEN 0x4000U /*!<LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE 0x0001U /*!<Error Interrupt Enable */
+#define USART_CR3_IREN 0x0002U /*!<IrDA mode Enable */
+#define USART_CR3_IRLP 0x0004U /*!<IrDA Low-Power */
+#define USART_CR3_HDSEL 0x0008U /*!<Half-Duplex Selection */
+#define USART_CR3_NACK 0x0010U /*!<Smartcard NACK enable */
+#define USART_CR3_SCEN 0x0020U /*!<Smartcard mode enable */
+#define USART_CR3_DMAR 0x0040U /*!<DMA Enable Receiver */
+#define USART_CR3_DMAT 0x0080U /*!<DMA Enable Transmitter */
+#define USART_CR3_RTSE 0x0100U /*!<RTS Enable */
+#define USART_CR3_CTSE 0x0200U /*!<CTS Enable */
+#define USART_CR3_CTSIE 0x0400U /*!<CTS Interrupt Enable */
+#define USART_CR3_ONEBIT 0x0800U /*!<USART One bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC 0x00FFU /*!<PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 0x0001U /*!<Bit 0 */
+#define USART_GTPR_PSC_1 0x0002U /*!<Bit 1 */
+#define USART_GTPR_PSC_2 0x0004U /*!<Bit 2 */
+#define USART_GTPR_PSC_3 0x0008U /*!<Bit 3 */
+#define USART_GTPR_PSC_4 0x0010U /*!<Bit 4 */
+#define USART_GTPR_PSC_5 0x0020U /*!<Bit 5 */
+#define USART_GTPR_PSC_6 0x0040U /*!<Bit 6 */
+#define USART_GTPR_PSC_7 0x0080U /*!<Bit 7 */
+
+#define USART_GTPR_GT 0xFF00U /*!<Guard time value */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T 0x7FU /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T_0 0x01U /*!<Bit 0 */
+#define WWDG_CR_T_1 0x02U /*!<Bit 1 */
+#define WWDG_CR_T_2 0x04U /*!<Bit 2 */
+#define WWDG_CR_T_3 0x08U /*!<Bit 3 */
+#define WWDG_CR_T_4 0x10U /*!<Bit 4 */
+#define WWDG_CR_T_5 0x20U /*!<Bit 5 */
+#define WWDG_CR_T_6 0x40U /*!<Bit 6 */
+/* Legacy defines */
+#define WWDG_CR_T0 WWDG_CR_T_0
+#define WWDG_CR_T1 WWDG_CR_T_1
+#define WWDG_CR_T2 WWDG_CR_T_2
+#define WWDG_CR_T3 WWDG_CR_T_3
+#define WWDG_CR_T4 WWDG_CR_T_4
+#define WWDG_CR_T5 WWDG_CR_T_5
+#define WWDG_CR_T6 WWDG_CR_T_6
+
+#define WWDG_CR_WDGA 0x80U /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W 0x007FU /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W_0 0x0001U /*!<Bit 0 */
+#define WWDG_CFR_W_1 0x0002U /*!<Bit 1 */
+#define WWDG_CFR_W_2 0x0004U /*!<Bit 2 */
+#define WWDG_CFR_W_3 0x0008U /*!<Bit 3 */
+#define WWDG_CFR_W_4 0x0010U /*!<Bit 4 */
+#define WWDG_CFR_W_5 0x0020U /*!<Bit 5 */
+#define WWDG_CFR_W_6 0x0040U /*!<Bit 6 */
+/* Legacy defines */
+#define WWDG_CFR_W0 WWDG_CFR_W_0
+#define WWDG_CFR_W1 WWDG_CFR_W_1
+#define WWDG_CFR_W2 WWDG_CFR_W_2
+#define WWDG_CFR_W3 WWDG_CFR_W_3
+#define WWDG_CFR_W4 WWDG_CFR_W_4
+#define WWDG_CFR_W5 WWDG_CFR_W_5
+#define WWDG_CFR_W6 WWDG_CFR_W_6
+
+#define WWDG_CFR_WDGTB 0x0180U /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB_0 0x0080U /*!<Bit 0 */
+#define WWDG_CFR_WDGTB_1 0x0100U /*!<Bit 1 */
+/* Legacy defines */
+#define WWDG_CFR_WDGTB0 WWDG_CFR_WDGTB_0
+#define WWDG_CFR_WDGTB1 WWDG_CFR_WDGTB_1
+
+#define WWDG_CFR_EWI 0x0200U /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF 0x01U /*!<Early Wakeup Interrupt Flag */
+
+
+/******************************************************************************/
+/* */
+/* DBG */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID 0x00000FFFU
+#define DBGMCU_IDCODE_REV_ID 0xFFFF0000U
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP 0x00000001U
+#define DBGMCU_CR_DBG_STOP 0x00000002U
+#define DBGMCU_CR_DBG_STANDBY 0x00000004U
+#define DBGMCU_CR_TRACE_IOEN 0x00000020U
+
+#define DBGMCU_CR_TRACE_MODE 0x000000C0U
+#define DBGMCU_CR_TRACE_MODE_0 0x00000040U/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 0x00000080U/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP 0x00000001U
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP 0x00000002U
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP 0x00000004U
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP 0x00000008U
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP 0x00000010U
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP 0x00000020U
+#define DBGMCU_APB1_FZ_DBG_TIM12_STOP 0x00000040U
+#define DBGMCU_APB1_FZ_DBG_TIM13_STOP 0x00000080U
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP 0x00000100U
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP 0x00000400U
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP 0x00000800U
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP 0x00001000U
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT 0x00200000U
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT 0x00400000U
+#define DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT 0x00800000U
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP 0x02000000U
+#define DBGMCU_APB1_FZ_DBG_CAN2_STOP 0x04000000U
+/* Old IWDGSTOP bit definition, maintained for legacy purpose */
+#define DBGMCU_APB1_FZ_DBG_IWDEG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP 0x00000001U
+#define DBGMCU_APB2_FZ_DBG_TIM8_STOP 0x00000002U
+#define DBGMCU_APB2_FZ_DBG_TIM9_STOP 0x00010000U
+#define DBGMCU_APB2_FZ_DBG_TIM10_STOP 0x00020000U
+#define DBGMCU_APB2_FZ_DBG_TIM11_STOP 0x00040000U
+
+/******************************************************************************/
+/* */
+/* USB_OTG */
+/* */
+/******************************************************************************/
+/******************** Bit definition forUSB_OTG_GOTGCTL register ********************/
+#define USB_OTG_GOTGCTL_SRQSCS 0x00000001U /*!< Session request success */
+#define USB_OTG_GOTGCTL_SRQ 0x00000002U /*!< Session request */
+#define USB_OTG_GOTGCTL_HNGSCS 0x00000100U /*!< Host negotiation success */
+#define USB_OTG_GOTGCTL_HNPRQ 0x00000200U /*!< HNP request */
+#define USB_OTG_GOTGCTL_HSHNPEN 0x00000400U /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_DHNPEN 0x00000800U /*!< Device HNP enabled */
+#define USB_OTG_GOTGCTL_CIDSTS 0x00010000U /*!< Connector ID status */
+#define USB_OTG_GOTGCTL_DBCT 0x00020000U /*!< Long/short debounce time */
+#define USB_OTG_GOTGCTL_ASVLD 0x00040000U /*!< A-session valid */
+#define USB_OTG_GOTGCTL_BSVLD 0x00080000U /*!< B-session valid */
+
+/******************** Bit definition forUSB_OTG_HCFG register ********************/
+
+#define USB_OTG_HCFG_FSLSPCS 0x00000003U /*!< FS/LS PHY clock select */
+#define USB_OTG_HCFG_FSLSPCS_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_HCFG_FSLSPCS_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_HCFG_FSLSS 0x00000004U /*!< FS- and LS-only support */
+
+/******************** Bit definition forUSB_OTG_DCFG register ********************/
+
+#define USB_OTG_DCFG_DSPD 0x00000003U /*!< Device speed */
+#define USB_OTG_DCFG_DSPD_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_DCFG_DSPD_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_DCFG_NZLSOHSK 0x00000004U /*!< Nonzero-length status OUT handshake */
+
+#define USB_OTG_DCFG_DAD 0x000007F0U /*!< Device address */
+#define USB_OTG_DCFG_DAD_0 0x00000010U /*!<Bit 0 */
+#define USB_OTG_DCFG_DAD_1 0x00000020U /*!<Bit 1 */
+#define USB_OTG_DCFG_DAD_2 0x00000040U /*!<Bit 2 */
+#define USB_OTG_DCFG_DAD_3 0x00000080U /*!<Bit 3 */
+#define USB_OTG_DCFG_DAD_4 0x00000100U /*!<Bit 4 */
+#define USB_OTG_DCFG_DAD_5 0x00000200U /*!<Bit 5 */
+#define USB_OTG_DCFG_DAD_6 0x00000400U /*!<Bit 6 */
+
+#define USB_OTG_DCFG_PFIVL 0x00001800U /*!< Periodic (micro)frame interval */
+#define USB_OTG_DCFG_PFIVL_0 0x00000800U /*!<Bit 0 */
+#define USB_OTG_DCFG_PFIVL_1 0x00001000U /*!<Bit 1 */
+
+#define USB_OTG_DCFG_PERSCHIVL 0x03000000U /*!< Periodic scheduling interval */
+#define USB_OTG_DCFG_PERSCHIVL_0 0x01000000U /*!<Bit 0 */
+#define USB_OTG_DCFG_PERSCHIVL_1 0x02000000U /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_PCGCR register ********************/
+#define USB_OTG_PCGCR_STPPCLK 0x00000001U /*!< Stop PHY clock */
+#define USB_OTG_PCGCR_GATEHCLK 0x00000002U /*!< Gate HCLK */
+#define USB_OTG_PCGCR_PHYSUSP 0x00000010U /*!< PHY suspended */
+
+/******************** Bit definition forUSB_OTG_GOTGINT register ********************/
+#define USB_OTG_GOTGINT_SEDET 0x00000004U /*!< Session end detected */
+#define USB_OTG_GOTGINT_SRSSCHG 0x00000100U /*!< Session request success status change */
+#define USB_OTG_GOTGINT_HNSSCHG 0x00000200U /*!< Host negotiation success status change */
+#define USB_OTG_GOTGINT_HNGDET 0x00020000U /*!< Host negotiation detected */
+#define USB_OTG_GOTGINT_ADTOCHG 0x00040000U /*!< A-device timeout change */
+#define USB_OTG_GOTGINT_DBCDNE 0x00080000U /*!< Debounce done */
+
+/******************** Bit definition forUSB_OTG_DCTL register ********************/
+#define USB_OTG_DCTL_RWUSIG 0x00000001U /*!< Remote wakeup signaling */
+#define USB_OTG_DCTL_SDIS 0x00000002U /*!< Soft disconnect */
+#define USB_OTG_DCTL_GINSTS 0x00000004U /*!< Global IN NAK status */
+#define USB_OTG_DCTL_GONSTS 0x00000008U /*!< Global OUT NAK status */
+
+#define USB_OTG_DCTL_TCTL 0x00000070U /*!< Test control */
+#define USB_OTG_DCTL_TCTL_0 0x00000010U /*!<Bit 0 */
+#define USB_OTG_DCTL_TCTL_1 0x00000020U /*!<Bit 1 */
+#define USB_OTG_DCTL_TCTL_2 0x00000040U /*!<Bit 2 */
+#define USB_OTG_DCTL_SGINAK 0x00000080U /*!< Set global IN NAK */
+#define USB_OTG_DCTL_CGINAK 0x00000100U /*!< Clear global IN NAK */
+#define USB_OTG_DCTL_SGONAK 0x00000200U /*!< Set global OUT NAK */
+#define USB_OTG_DCTL_CGONAK 0x00000400U /*!< Clear global OUT NAK */
+#define USB_OTG_DCTL_POPRGDNE 0x00000800U /*!< Power-on programming done */
+
+/******************** Bit definition forUSB_OTG_HFIR register ********************/
+#define USB_OTG_HFIR_FRIVL 0x0000FFFFU /*!< Frame interval */
+
+/******************** Bit definition forUSB_OTG_HFNUM register ********************/
+#define USB_OTG_HFNUM_FRNUM 0x0000FFFFU /*!< Frame number */
+#define USB_OTG_HFNUM_FTREM 0xFFFF0000U /*!< Frame time remaining */
+
+/******************** Bit definition forUSB_OTG_DSTS register ********************/
+#define USB_OTG_DSTS_SUSPSTS 0x00000001U /*!< Suspend status */
+
+#define USB_OTG_DSTS_ENUMSPD 0x00000006U /*!< Enumerated speed */
+#define USB_OTG_DSTS_ENUMSPD_0 0x00000002U /*!<Bit 0 */
+#define USB_OTG_DSTS_ENUMSPD_1 0x00000004U /*!<Bit 1 */
+#define USB_OTG_DSTS_EERR 0x00000008U /*!< Erratic error */
+#define USB_OTG_DSTS_FNSOF 0x003FFF00U /*!< Frame number of the received SOF */
+
+/******************** Bit definition forUSB_OTG_GAHBCFG register ********************/
+#define USB_OTG_GAHBCFG_GINT 0x00000001U /*!< Global interrupt mask */
+
+#define USB_OTG_GAHBCFG_HBSTLEN 0x0000001EU /*!< Burst length/type */
+#define USB_OTG_GAHBCFG_HBSTLEN_0 0x00000002U /*!<Bit 0 */
+#define USB_OTG_GAHBCFG_HBSTLEN_1 0x00000004U /*!<Bit 1 */
+#define USB_OTG_GAHBCFG_HBSTLEN_2 0x00000008U /*!<Bit 2 */
+#define USB_OTG_GAHBCFG_HBSTLEN_3 0x00000010U /*!<Bit 3 */
+#define USB_OTG_GAHBCFG_DMAEN 0x00000020U /*!< DMA enable */
+#define USB_OTG_GAHBCFG_TXFELVL 0x00000080U /*!< TxFIFO empty level */
+#define USB_OTG_GAHBCFG_PTXFELVL 0x00000100U /*!< Periodic TxFIFO empty level */
+
+/******************** Bit definition forUSB_OTG_GUSBCFG register ********************/
+
+#define USB_OTG_GUSBCFG_TOCAL 0x00000007U /*!< FS timeout calibration */
+#define USB_OTG_GUSBCFG_TOCAL_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TOCAL_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TOCAL_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_PHYSEL 0x00000040U /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
+#define USB_OTG_GUSBCFG_SRPCAP 0x00000100U /*!< SRP-capable */
+#define USB_OTG_GUSBCFG_HNPCAP 0x00000200U /*!< HNP-capable */
+
+#define USB_OTG_GUSBCFG_TRDT 0x00003C00U /*!< USB turnaround time */
+#define USB_OTG_GUSBCFG_TRDT_0 0x00000400U /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TRDT_1 0x00000800U /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TRDT_2 0x00001000U /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_TRDT_3 0x00002000U /*!<Bit 3 */
+#define USB_OTG_GUSBCFG_PHYLPCS 0x00008000U /*!< PHY Low-power clock select */
+#define USB_OTG_GUSBCFG_ULPIFSLS 0x00020000U /*!< ULPI FS/LS select */
+#define USB_OTG_GUSBCFG_ULPIAR 0x00040000U /*!< ULPI Auto-resume */
+#define USB_OTG_GUSBCFG_ULPICSM 0x00080000U /*!< ULPI Clock SuspendM */
+#define USB_OTG_GUSBCFG_ULPIEVBUSD 0x00100000U /*!< ULPI External VBUS Drive */
+#define USB_OTG_GUSBCFG_ULPIEVBUSI 0x00200000U /*!< ULPI external VBUS indicator */
+#define USB_OTG_GUSBCFG_TSDPS 0x00400000U /*!< TermSel DLine pulsing selection */
+#define USB_OTG_GUSBCFG_PCCI 0x00800000U /*!< Indicator complement */
+#define USB_OTG_GUSBCFG_PTCI 0x01000000U /*!< Indicator pass through */
+#define USB_OTG_GUSBCFG_ULPIIPD 0x02000000U /*!< ULPI interface protect disable */
+#define USB_OTG_GUSBCFG_FHMOD 0x20000000U /*!< Forced host mode */
+#define USB_OTG_GUSBCFG_FDMOD 0x40000000U /*!< Forced peripheral mode */
+#define USB_OTG_GUSBCFG_CTXPKT 0x80000000U /*!< Corrupt Tx packet */
+
+/******************** Bit definition forUSB_OTG_GRSTCTL register ********************/
+#define USB_OTG_GRSTCTL_CSRST 0x00000001U /*!< Core soft reset */
+#define USB_OTG_GRSTCTL_HSRST 0x00000002U /*!< HCLK soft reset */
+#define USB_OTG_GRSTCTL_FCRST 0x00000004U /*!< Host frame counter reset */
+#define USB_OTG_GRSTCTL_RXFFLSH 0x00000010U /*!< RxFIFO flush */
+#define USB_OTG_GRSTCTL_TXFFLSH 0x00000020U /*!< TxFIFO flush */
+
+#define USB_OTG_GRSTCTL_TXFNUM 0x000007C0U /*!< TxFIFO number */
+#define USB_OTG_GRSTCTL_TXFNUM_0 0x00000040U /*!<Bit 0 */
+#define USB_OTG_GRSTCTL_TXFNUM_1 0x00000080U /*!<Bit 1 */
+#define USB_OTG_GRSTCTL_TXFNUM_2 0x00000100U /*!<Bit 2 */
+#define USB_OTG_GRSTCTL_TXFNUM_3 0x00000200U /*!<Bit 3 */
+#define USB_OTG_GRSTCTL_TXFNUM_4 0x00000400U /*!<Bit 4 */
+#define USB_OTG_GRSTCTL_DMAREQ 0x40000000U /*!< DMA request signal */
+#define USB_OTG_GRSTCTL_AHBIDL 0x80000000U /*!< AHB master idle */
+
+/******************** Bit definition forUSB_OTG_DIEPMSK register ********************/
+#define USB_OTG_DIEPMSK_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPMSK_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPMSK_TOM 0x00000008U /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPMSK_ITTXFEMSK 0x00000010U /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPMSK_INEPNMM 0x00000020U /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPMSK_INEPNEM 0x00000040U /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPMSK_TXFURM 0x00000100U /*!< FIFO underrun mask */
+#define USB_OTG_DIEPMSK_BIM 0x00000200U /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXSTS register ********************/
+#define USB_OTG_HPTXSTS_PTXFSAVL 0x0000FFFFU /*!< Periodic transmit data FIFO space available */
+
+#define USB_OTG_HPTXSTS_PTXQSAV 0x00FF0000U /*!< Periodic transmit request queue space available */
+#define USB_OTG_HPTXSTS_PTXQSAV_0 0x00010000U /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQSAV_1 0x00020000U /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQSAV_2 0x00040000U /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQSAV_3 0x00080000U /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQSAV_4 0x00100000U /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQSAV_5 0x00200000U /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQSAV_6 0x00400000U /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQSAV_7 0x00800000U /*!<Bit 7 */
+
+#define USB_OTG_HPTXSTS_PTXQTOP 0xFF000000U /*!< Top of the periodic transmit request queue */
+#define USB_OTG_HPTXSTS_PTXQTOP_0 0x01000000U /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQTOP_1 0x02000000U /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQTOP_2 0x04000000U /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQTOP_3 0x08000000U /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQTOP_4 0x10000000U /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQTOP_5 0x20000000U /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQTOP_6 0x40000000U /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQTOP_7 0x80000000U /*!<Bit 7 */
+
+/******************** Bit definition forUSB_OTG_HAINT register ********************/
+#define USB_OTG_HAINT_HAINT 0x0000FFFFU /*!< Channel interrupts */
+
+/******************** Bit definition forUSB_OTG_DOEPMSK register ********************/
+#define USB_OTG_DOEPMSK_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPMSK_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPMSK_STUPM 0x00000008U /*!< SETUP phase done mask */
+#define USB_OTG_DOEPMSK_OTEPDM 0x00000010U /*!< OUT token received when endpoint disabled mask */
+#define USB_OTG_DOEPMSK_B2BSTUP 0x00000040U /*!< Back-to-back SETUP packets received mask */
+#define USB_OTG_DOEPMSK_OPEM 0x00000100U /*!< OUT packet error mask */
+#define USB_OTG_DOEPMSK_BOIM 0x00000200U /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_GINTSTS register ********************/
+#define USB_OTG_GINTSTS_CMOD 0x00000001U /*!< Current mode of operation */
+#define USB_OTG_GINTSTS_MMIS 0x00000002U /*!< Mode mismatch interrupt */
+#define USB_OTG_GINTSTS_OTGINT 0x00000004U /*!< OTG interrupt */
+#define USB_OTG_GINTSTS_SOF 0x00000008U /*!< Start of frame */
+#define USB_OTG_GINTSTS_RXFLVL 0x00000010U /*!< RxFIFO nonempty */
+#define USB_OTG_GINTSTS_NPTXFE 0x00000020U /*!< Nonperiodic TxFIFO empty */
+#define USB_OTG_GINTSTS_GINAKEFF 0x00000040U /*!< Global IN nonperiodic NAK effective */
+#define USB_OTG_GINTSTS_BOUTNAKEFF 0x00000080U /*!< Global OUT NAK effective */
+#define USB_OTG_GINTSTS_ESUSP 0x00000400U /*!< Early suspend */
+#define USB_OTG_GINTSTS_USBSUSP 0x00000800U /*!< USB suspend */
+#define USB_OTG_GINTSTS_USBRST 0x00001000U /*!< USB reset */
+#define USB_OTG_GINTSTS_ENUMDNE 0x00002000U /*!< Enumeration done */
+#define USB_OTG_GINTSTS_ISOODRP 0x00004000U /*!< Isochronous OUT packet dropped interrupt */
+#define USB_OTG_GINTSTS_EOPF 0x00008000U /*!< End of periodic frame interrupt */
+#define USB_OTG_GINTSTS_IEPINT 0x00040000U /*!< IN endpoint interrupt */
+#define USB_OTG_GINTSTS_OEPINT 0x00080000U /*!< OUT endpoint interrupt */
+#define USB_OTG_GINTSTS_IISOIXFR 0x00100000U /*!< Incomplete isochronous IN transfer */
+#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT 0x00200000U /*!< Incomplete periodic transfer */
+#define USB_OTG_GINTSTS_DATAFSUSP 0x00400000U /*!< Data fetch suspended */
+#define USB_OTG_GINTSTS_HPRTINT 0x01000000U /*!< Host port interrupt */
+#define USB_OTG_GINTSTS_HCINT 0x02000000U /*!< Host channels interrupt */
+#define USB_OTG_GINTSTS_PTXFE 0x04000000U /*!< Periodic TxFIFO empty */
+#define USB_OTG_GINTSTS_CIDSCHG 0x10000000U /*!< Connector ID status change */
+#define USB_OTG_GINTSTS_DISCINT 0x20000000U /*!< Disconnect detected interrupt */
+#define USB_OTG_GINTSTS_SRQINT 0x40000000U /*!< Session request/new session detected interrupt */
+#define USB_OTG_GINTSTS_WKUINT 0x80000000U /*!< Resume/remote wakeup detected interrupt */
+
+/******************** Bit definition forUSB_OTG_GINTMSK register ********************/
+#define USB_OTG_GINTMSK_MMISM 0x00000002U /*!< Mode mismatch interrupt mask */
+#define USB_OTG_GINTMSK_OTGINT 0x00000004U /*!< OTG interrupt mask */
+#define USB_OTG_GINTMSK_SOFM 0x00000008U /*!< Start of frame mask */
+#define USB_OTG_GINTMSK_RXFLVLM 0x00000010U /*!< Receive FIFO nonempty mask */
+#define USB_OTG_GINTMSK_NPTXFEM 0x00000020U /*!< Nonperiodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_GINAKEFFM 0x00000040U /*!< Global nonperiodic IN NAK effective mask */
+#define USB_OTG_GINTMSK_GONAKEFFM 0x00000080U /*!< Global OUT NAK effective mask */
+#define USB_OTG_GINTMSK_ESUSPM 0x00000400U /*!< Early suspend mask */
+#define USB_OTG_GINTMSK_USBSUSPM 0x00000800U /*!< USB suspend mask */
+#define USB_OTG_GINTMSK_USBRST 0x00001000U /*!< USB reset mask */
+#define USB_OTG_GINTMSK_ENUMDNEM 0x00002000U /*!< Enumeration done mask */
+#define USB_OTG_GINTMSK_ISOODRPM 0x00004000U /*!< Isochronous OUT packet dropped interrupt mask */
+#define USB_OTG_GINTMSK_EOPFM 0x00008000U /*!< End of periodic frame interrupt mask */
+#define USB_OTG_GINTMSK_EPMISM 0x00020000U /*!< Endpoint mismatch interrupt mask */
+#define USB_OTG_GINTMSK_IEPINT 0x00040000U /*!< IN endpoints interrupt mask */
+#define USB_OTG_GINTMSK_OEPINT 0x00080000U /*!< OUT endpoints interrupt mask */
+#define USB_OTG_GINTMSK_IISOIXFRM 0x00100000U /*!< Incomplete isochronous IN transfer mask */
+#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM 0x00200000U /*!< Incomplete periodic transfer mask */
+#define USB_OTG_GINTMSK_FSUSPM 0x00400000U /*!< Data fetch suspended mask */
+#define USB_OTG_GINTMSK_PRTIM 0x01000000U /*!< Host port interrupt mask */
+#define USB_OTG_GINTMSK_HCIM 0x02000000U /*!< Host channels interrupt mask */
+#define USB_OTG_GINTMSK_PTXFEM 0x04000000U /*!< Periodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_CIDSCHGM 0x10000000U /*!< Connector ID status change mask */
+#define USB_OTG_GINTMSK_DISCINT 0x20000000U /*!< Disconnect detected interrupt mask */
+#define USB_OTG_GINTMSK_SRQIM 0x40000000U /*!< Session request/new session detected interrupt mask */
+#define USB_OTG_GINTMSK_WUIM 0x80000000U /*!< Resume/remote wakeup detected interrupt mask */
+
+/******************** Bit definition forUSB_OTG_DAINT register ********************/
+#define USB_OTG_DAINT_IEPINT 0x0000FFFFU /*!< IN endpoint interrupt bits */
+#define USB_OTG_DAINT_OEPINT 0xFFFF0000U /*!< OUT endpoint interrupt bits */
+
+/******************** Bit definition forUSB_OTG_HAINTMSK register ********************/
+#define USB_OTG_HAINTMSK_HAINTM 0x0000FFFFU /*!< Channel interrupt mask */
+
+/******************** Bit definition for USB_OTG_GRXSTSP register ********************/
+#define USB_OTG_GRXSTSP_EPNUM 0x0000000FU /*!< IN EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_BCNT 0x00007FF0U /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_DPID 0x00018000U /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_PKTSTS 0x001E0000U /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DAINTMSK register ********************/
+#define USB_OTG_DAINTMSK_IEPM 0x0000FFFFU /*!< IN EP interrupt mask bits */
+#define USB_OTG_DAINTMSK_OEPM 0xFFFF0000U /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM 0x0000000FU /*!< Channel number */
+#define USB_OTG_CHNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 0x00000008U /*!<Bit 3 */
+#define USB_OTG_BCNT 0x00007FF0U /*!< Byte count */
+
+#define USB_OTG_DPID 0x00018000U /*!< Data PID */
+#define USB_OTG_DPID_0 0x00008000U /*!<Bit 0 */
+#define USB_OTG_DPID_1 0x00010000U /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS 0x001E0000U /*!< Packet status */
+#define USB_OTG_PKTSTS_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 0x00040000U /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 0x00080000U /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 0x00100000U /*!<Bit 3 */
+
+#define USB_OTG_EPNUM 0x0000000FU /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 0x00000008U /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM 0x01E00000U /*!< Frame number */
+#define USB_OTG_FRMNUM_0 0x00200000U /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 0x00400000U /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 0x00800000U /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 0x01000000U /*!<Bit 3 */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM 0x0000000FU /*!< Channel number */
+#define USB_OTG_CHNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 0x00000008U /*!<Bit 3 */
+#define USB_OTG_BCNT 0x00007FF0U /*!< Byte count */
+
+#define USB_OTG_DPID 0x00018000U /*!< Data PID */
+#define USB_OTG_DPID_0 0x00008000U /*!<Bit 0 */
+#define USB_OTG_DPID_1 0x00010000U /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS 0x001E0000U /*!< Packet status */
+#define USB_OTG_PKTSTS_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 0x00040000U /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 0x00080000U /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 0x00100000U /*!<Bit 3 */
+
+#define USB_OTG_EPNUM 0x0000000FU /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 0x00000008U /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM 0x01E00000U /*!< Frame number */
+#define USB_OTG_FRMNUM_0 0x00200000U /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 0x00400000U /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 0x00800000U /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 0x01000000U /*!<Bit 3 */
+
+/******************** Bit definition forUSB_OTG_GRXFSIZ register ********************/
+#define USB_OTG_GRXFSIZ_RXFD 0x0000FFFFU /*!< RxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSDIS register ********************/
+#define USB_OTG_DVBUSDIS_VBUSDT 0x0000FFFFU /*!< Device VBUS discharge time */
+
+/******************** Bit definition for OTG register ********************/
+#define USB_OTG_NPTXFSA 0x0000FFFFU /*!< Nonperiodic transmit RAM start address */
+#define USB_OTG_NPTXFD 0xFFFF0000U /*!< Nonperiodic TxFIFO depth */
+#define USB_OTG_TX0FSA 0x0000FFFFU /*!< Endpoint 0 transmit RAM start address */
+#define USB_OTG_TX0FD 0xFFFF0000U /*!< Endpoint 0 TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSPULSE register ********************/
+#define USB_OTG_DVBUSPULSE_DVBUSP 0x00000FFFU /*!< Device VBUS pulsing time */
+
+/******************** Bit definition forUSB_OTG_GNPTXSTS register ********************/
+#define USB_OTG_GNPTXSTS_NPTXFSAV 0x0000FFFFU /*!< Nonperiodic TxFIFO space available */
+
+#define USB_OTG_GNPTXSTS_NPTQXSAV 0x00FF0000U /*!< Nonperiodic transmit request queue space available */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_0 0x00010000U /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_1 0x00020000U /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_2 0x00040000U /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_3 0x00080000U /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_4 0x00100000U /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_5 0x00200000U /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_6 0x00400000U /*!<Bit 6 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_7 0x00800000U /*!<Bit 7 */
+
+#define USB_OTG_GNPTXSTS_NPTXQTOP 0x7F000000U /*!< Top of the nonperiodic transmit request queue */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_0 0x01000000U /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_1 0x02000000U /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_2 0x04000000U /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_3 0x08000000U /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_4 0x10000000U /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_5 0x20000000U /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_6 0x40000000U /*!<Bit 6 */
+
+/******************** Bit definition forUSB_OTG_DTHRCTL register ********************/
+#define USB_OTG_DTHRCTL_NONISOTHREN 0x00000001U /*!< Nonisochronous IN endpoints threshold enable */
+#define USB_OTG_DTHRCTL_ISOTHREN 0x00000002U /*!< ISO IN endpoint threshold enable */
+
+#define USB_OTG_DTHRCTL_TXTHRLEN 0x000007FCU /*!< Transmit threshold length */
+#define USB_OTG_DTHRCTL_TXTHRLEN_0 0x00000004U /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_1 0x00000008U /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_2 0x00000010U /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_3 0x00000020U /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_4 0x00000040U /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_5 0x00000080U /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_6 0x00000100U /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_7 0x00000200U /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_8 0x00000400U /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_RXTHREN 0x00010000U /*!< Receive threshold enable */
+
+#define USB_OTG_DTHRCTL_RXTHRLEN 0x03FE0000U /*!< Receive threshold length */
+#define USB_OTG_DTHRCTL_RXTHRLEN_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_1 0x00040000U /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_2 0x00080000U /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_3 0x00100000U /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_4 0x00200000U /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_5 0x00400000U /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_6 0x00800000U /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_7 0x01000000U /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_8 0x02000000U /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_ARPEN 0x08000000U /*!< Arbiter parking enable */
+
+/******************** Bit definition forUSB_OTG_DIEPEMPMSK register ********************/
+#define USB_OTG_DIEPEMPMSK_INEPTXFEM 0x0000FFFFU /*!< IN EP Tx FIFO empty interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DEACHINT register ********************/
+#define USB_OTG_DEACHINT_IEP1INT 0x00000002U /*!< IN endpoint 1interrupt bit */
+#define USB_OTG_DEACHINT_OEP1INT 0x00020000U /*!< OUT endpoint 1 interrupt bit */
+
+/******************** Bit definition forUSB_OTG_GCCFG register ********************/
+#define USB_OTG_GCCFG_PWRDWN 0x00010000U /*!< Power down */
+#define USB_OTG_GCCFG_I2CPADEN 0x00020000U /*!< Enable I2C bus connection for the external I2C PHY interface */
+#define USB_OTG_GCCFG_VBUSASEN 0x00040000U /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_VBUSBSEN 0x00080000U /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_SOFOUTEN 0x00100000U /*!< SOF output enable */
+#define USB_OTG_GCCFG_NOVBUSSENS 0x00200000U /*!< VBUS sensing disable option */
+
+/******************** Bit definition forUSB_OTG_DEACHINTMSK register ********************/
+#define USB_OTG_DEACHINTMSK_IEP1INTM 0x00000002U /*!< IN Endpoint 1 interrupt mask bit */
+#define USB_OTG_DEACHINTMSK_OEP1INTM 0x00020000U /*!< OUT Endpoint 1 interrupt mask bit */
+
+/******************** Bit definition forUSB_OTG_CID register ********************/
+#define USB_OTG_CID_PRODUCT_ID 0xFFFFFFFFU /*!< Product ID field */
+
+/******************** Bit definition forUSB_OTG_DIEPEACHMSK1 register ********************/
+#define USB_OTG_DIEPEACHMSK1_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_TOM 0x00000008U /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK 0x00000010U /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNMM 0x00000020U /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNEM 0x00000040U /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPEACHMSK1_TXFURM 0x00000100U /*!< FIFO underrun mask */
+#define USB_OTG_DIEPEACHMSK1_BIM 0x00000200U /*!< BNA interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_NAKM 0x00002000U /*!< NAK interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPRT register ********************/
+#define USB_OTG_HPRT_PCSTS 0x00000001U /*!< Port connect status */
+#define USB_OTG_HPRT_PCDET 0x00000002U /*!< Port connect detected */
+#define USB_OTG_HPRT_PENA 0x00000004U /*!< Port enable */
+#define USB_OTG_HPRT_PENCHNG 0x00000008U /*!< Port enable/disable change */
+#define USB_OTG_HPRT_POCA 0x00000010U /*!< Port overcurrent active */
+#define USB_OTG_HPRT_POCCHNG 0x00000020U /*!< Port overcurrent change */
+#define USB_OTG_HPRT_PRES 0x00000040U /*!< Port resume */
+#define USB_OTG_HPRT_PSUSP 0x00000080U /*!< Port suspend */
+#define USB_OTG_HPRT_PRST 0x00000100U /*!< Port reset */
+
+#define USB_OTG_HPRT_PLSTS 0x00000C00U /*!< Port line status */
+#define USB_OTG_HPRT_PLSTS_0 0x00000400U /*!<Bit 0 */
+#define USB_OTG_HPRT_PLSTS_1 0x00000800U /*!<Bit 1 */
+#define USB_OTG_HPRT_PPWR 0x00001000U /*!< Port power */
+
+#define USB_OTG_HPRT_PTCTL 0x0001E000U /*!< Port test control */
+#define USB_OTG_HPRT_PTCTL_0 0x00002000U /*!<Bit 0 */
+#define USB_OTG_HPRT_PTCTL_1 0x00004000U /*!<Bit 1 */
+#define USB_OTG_HPRT_PTCTL_2 0x00008000U /*!<Bit 2 */
+#define USB_OTG_HPRT_PTCTL_3 0x00010000U /*!<Bit 3 */
+
+#define USB_OTG_HPRT_PSPD 0x00060000U /*!< Port speed */
+#define USB_OTG_HPRT_PSPD_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_HPRT_PSPD_1 0x00040000U /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DOEPEACHMSK1 register ********************/
+#define USB_OTG_DOEPEACHMSK1_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_TOM 0x00000008U /*!< Timeout condition mask */
+#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK 0x00000010U /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNMM 0x00000020U /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNEM 0x00000040U /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DOEPEACHMSK1_TXFURM 0x00000100U /*!< OUT packet error mask */
+#define USB_OTG_DOEPEACHMSK1_BIM 0x00000200U /*!< BNA interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_BERRM 0x00001000U /*!< Bubble error interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NAKM 0x00002000U /*!< NAK interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NYETM 0x00004000U /*!< NYET interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXFSIZ register ********************/
+#define USB_OTG_HPTXFSIZ_PTXSA 0x0000FFFFU /*!< Host periodic TxFIFO start address */
+#define USB_OTG_HPTXFSIZ_PTXFD 0xFFFF0000U /*!< Host periodic TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DIEPCTL register ********************/
+#define USB_OTG_DIEPCTL_MPSIZ 0x000007FFU /*!< Maximum packet size */
+#define USB_OTG_DIEPCTL_USBAEP 0x00008000U /*!< USB active endpoint */
+#define USB_OTG_DIEPCTL_EONUM_DPID 0x00010000U /*!< Even/odd frame */
+#define USB_OTG_DIEPCTL_NAKSTS 0x00020000U /*!< NAK status */
+
+#define USB_OTG_DIEPCTL_EPTYP 0x000C0000U /*!< Endpoint type */
+#define USB_OTG_DIEPCTL_EPTYP_0 0x00040000U /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_EPTYP_1 0x00080000U /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_STALL 0x00200000U /*!< STALL handshake */
+
+#define USB_OTG_DIEPCTL_TXFNUM 0x03C00000U /*!< TxFIFO number */
+#define USB_OTG_DIEPCTL_TXFNUM_0 0x00400000U /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_TXFNUM_1 0x00800000U /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_TXFNUM_2 0x01000000U /*!<Bit 2 */
+#define USB_OTG_DIEPCTL_TXFNUM_3 0x02000000U /*!<Bit 3 */
+#define USB_OTG_DIEPCTL_CNAK 0x04000000U /*!< Clear NAK */
+#define USB_OTG_DIEPCTL_SNAK 0x08000000U /*!< Set NAK */
+#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM 0x10000000U /*!< Set DATA0 PID */
+#define USB_OTG_DIEPCTL_SODDFRM 0x20000000U /*!< Set odd frame */
+#define USB_OTG_DIEPCTL_EPDIS 0x40000000U /*!< Endpoint disable */
+#define USB_OTG_DIEPCTL_EPENA 0x80000000U /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_HCCHAR register ********************/
+#define USB_OTG_HCCHAR_MPSIZ 0x000007FFU /*!< Maximum packet size */
+
+#define USB_OTG_HCCHAR_EPNUM 0x00007800U /*!< Endpoint number */
+#define USB_OTG_HCCHAR_EPNUM_0 0x00000800U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPNUM_1 0x00001000U /*!<Bit 1 */
+#define USB_OTG_HCCHAR_EPNUM_2 0x00002000U /*!<Bit 2 */
+#define USB_OTG_HCCHAR_EPNUM_3 0x00004000U /*!<Bit 3 */
+#define USB_OTG_HCCHAR_EPDIR 0x00008000U /*!< Endpoint direction */
+#define USB_OTG_HCCHAR_LSDEV 0x00020000U /*!< Low-speed device */
+
+#define USB_OTG_HCCHAR_EPTYP 0x000C0000U /*!< Endpoint type */
+#define USB_OTG_HCCHAR_EPTYP_0 0x00040000U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPTYP_1 0x00080000U /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_MC 0x00300000U /*!< Multi Count (MC) / Error Count (EC) */
+#define USB_OTG_HCCHAR_MC_0 0x00100000U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_MC_1 0x00200000U /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_DAD 0x1FC00000U /*!< Device address */
+#define USB_OTG_HCCHAR_DAD_0 0x00400000U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_DAD_1 0x00800000U /*!<Bit 1 */
+#define USB_OTG_HCCHAR_DAD_2 0x01000000U /*!<Bit 2 */
+#define USB_OTG_HCCHAR_DAD_3 0x02000000U /*!<Bit 3 */
+#define USB_OTG_HCCHAR_DAD_4 0x04000000U /*!<Bit 4 */
+#define USB_OTG_HCCHAR_DAD_5 0x08000000U /*!<Bit 5 */
+#define USB_OTG_HCCHAR_DAD_6 0x10000000U /*!<Bit 6 */
+#define USB_OTG_HCCHAR_ODDFRM 0x20000000U /*!< Odd frame */
+#define USB_OTG_HCCHAR_CHDIS 0x40000000U /*!< Channel disable */
+#define USB_OTG_HCCHAR_CHENA 0x80000000U /*!< Channel enable */
+
+/******************** Bit definition forUSB_OTG_HCSPLT register ********************/
+
+#define USB_OTG_HCSPLT_PRTADDR 0x0000007FU /*!< Port address */
+#define USB_OTG_HCSPLT_PRTADDR_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_HCSPLT_PRTADDR_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_HCSPLT_PRTADDR_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_HCSPLT_PRTADDR_3 0x00000008U /*!<Bit 3 */
+#define USB_OTG_HCSPLT_PRTADDR_4 0x00000010U /*!<Bit 4 */
+#define USB_OTG_HCSPLT_PRTADDR_5 0x00000020U /*!<Bit 5 */
+#define USB_OTG_HCSPLT_PRTADDR_6 0x00000040U /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_HUBADDR 0x00003F80U /*!< Hub address */
+#define USB_OTG_HCSPLT_HUBADDR_0 0x00000080U /*!<Bit 0 */
+#define USB_OTG_HCSPLT_HUBADDR_1 0x00000100U /*!<Bit 1 */
+#define USB_OTG_HCSPLT_HUBADDR_2 0x00000200U /*!<Bit 2 */
+#define USB_OTG_HCSPLT_HUBADDR_3 0x00000400U /*!<Bit 3 */
+#define USB_OTG_HCSPLT_HUBADDR_4 0x00000800U /*!<Bit 4 */
+#define USB_OTG_HCSPLT_HUBADDR_5 0x00001000U /*!<Bit 5 */
+#define USB_OTG_HCSPLT_HUBADDR_6 0x00002000U /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_XACTPOS 0x0000C000U /*!< XACTPOS */
+#define USB_OTG_HCSPLT_XACTPOS_0 0x00004000U /*!<Bit 0 */
+#define USB_OTG_HCSPLT_XACTPOS_1 0x00008000U /*!<Bit 1 */
+#define USB_OTG_HCSPLT_COMPLSPLT 0x00010000U /*!< Do complete split */
+#define USB_OTG_HCSPLT_SPLITEN 0x80000000U /*!< Split enable */
+
+/******************** Bit definition forUSB_OTG_HCINT register ********************/
+#define USB_OTG_HCINT_XFRC 0x00000001U /*!< Transfer completed */
+#define USB_OTG_HCINT_CHH 0x00000002U /*!< Channel halted */
+#define USB_OTG_HCINT_AHBERR 0x00000004U /*!< AHB error */
+#define USB_OTG_HCINT_STALL 0x00000008U /*!< STALL response received interrupt */
+#define USB_OTG_HCINT_NAK 0x00000010U /*!< NAK response received interrupt */
+#define USB_OTG_HCINT_ACK 0x00000020U /*!< ACK response received/transmitted interrupt */
+#define USB_OTG_HCINT_NYET 0x00000040U /*!< Response received interrupt */
+#define USB_OTG_HCINT_TXERR 0x00000080U /*!< Transaction error */
+#define USB_OTG_HCINT_BBERR 0x00000100U /*!< Babble error */
+#define USB_OTG_HCINT_FRMOR 0x00000200U /*!< Frame overrun */
+#define USB_OTG_HCINT_DTERR 0x00000400U /*!< Data toggle error */
+
+/******************** Bit definition forUSB_OTG_DIEPINT register ********************/
+#define USB_OTG_DIEPINT_XFRC 0x00000001U /*!< Transfer completed interrupt */
+#define USB_OTG_DIEPINT_EPDISD 0x00000002U /*!< Endpoint disabled interrupt */
+#define USB_OTG_DIEPINT_TOC 0x00000008U /*!< Timeout condition */
+#define USB_OTG_DIEPINT_ITTXFE 0x00000010U /*!< IN token received when TxFIFO is empty */
+#define USB_OTG_DIEPINT_INEPNE 0x00000040U /*!< IN endpoint NAK effective */
+#define USB_OTG_DIEPINT_TXFE 0x00000080U /*!< Transmit FIFO empty */
+#define USB_OTG_DIEPINT_TXFIFOUDRN 0x00000100U /*!< Transmit Fifo Underrun */
+#define USB_OTG_DIEPINT_BNA 0x00000200U /*!< Buffer not available interrupt */
+#define USB_OTG_DIEPINT_PKTDRPSTS 0x00000800U /*!< Packet dropped status */
+#define USB_OTG_DIEPINT_BERR 0x00001000U /*!< Babble error interrupt */
+#define USB_OTG_DIEPINT_NAK 0x00002000U /*!< NAK interrupt */
+
+/******************** Bit definition forUSB_OTG_HCINTMSK register ********************/
+#define USB_OTG_HCINTMSK_XFRCM 0x00000001U /*!< Transfer completed mask */
+#define USB_OTG_HCINTMSK_CHHM 0x00000002U /*!< Channel halted mask */
+#define USB_OTG_HCINTMSK_AHBERR 0x00000004U /*!< AHB error */
+#define USB_OTG_HCINTMSK_STALLM 0x00000008U /*!< STALL response received interrupt mask */
+#define USB_OTG_HCINTMSK_NAKM 0x00000010U /*!< NAK response received interrupt mask */
+#define USB_OTG_HCINTMSK_ACKM 0x00000020U /*!< ACK response received/transmitted interrupt mask */
+#define USB_OTG_HCINTMSK_NYET 0x00000040U /*!< response received interrupt mask */
+#define USB_OTG_HCINTMSK_TXERRM 0x00000080U /*!< Transaction error mask */
+#define USB_OTG_HCINTMSK_BBERRM 0x00000100U /*!< Babble error mask */
+#define USB_OTG_HCINTMSK_FRMORM 0x00000200U /*!< Frame overrun mask */
+#define USB_OTG_HCINTMSK_DTERRM 0x00000400U /*!< Data toggle error mask */
+
+/******************** Bit definition for USB_OTG_DIEPTSIZ register ********************/
+
+#define USB_OTG_DIEPTSIZ_XFRSIZ 0x0007FFFFU /*!< Transfer size */
+#define USB_OTG_DIEPTSIZ_PKTCNT 0x1FF80000U /*!< Packet count */
+#define USB_OTG_DIEPTSIZ_MULCNT 0x60000000U /*!< Packet count */
+/******************** Bit definition forUSB_OTG_HCTSIZ register ********************/
+#define USB_OTG_HCTSIZ_XFRSIZ 0x0007FFFFU /*!< Transfer size */
+#define USB_OTG_HCTSIZ_PKTCNT 0x1FF80000U /*!< Packet count */
+#define USB_OTG_HCTSIZ_DOPING 0x80000000U /*!< Do PING */
+#define USB_OTG_HCTSIZ_DPID 0x60000000U /*!< Data PID */
+#define USB_OTG_HCTSIZ_DPID_0 0x20000000U /*!<Bit 0 */
+#define USB_OTG_HCTSIZ_DPID_1 0x40000000U /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DIEPDMA register ********************/
+#define USB_OTG_DIEPDMA_DMAADDR 0xFFFFFFFFU /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_HCDMA register ********************/
+#define USB_OTG_HCDMA_DMAADDR 0xFFFFFFFFU /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_DTXFSTS register ********************/
+#define USB_OTG_DTXFSTS_INEPTFSAV 0x0000FFFFU /*!< IN endpoint TxFIFO space avail */
+
+/******************** Bit definition forUSB_OTG_DIEPTXF register ********************/
+#define USB_OTG_DIEPTXF_INEPTXSA 0x0000FFFFU /*!< IN endpoint FIFOx transmit RAM start address */
+#define USB_OTG_DIEPTXF_INEPTXFD 0xFFFF0000U /*!< IN endpoint TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DOEPCTL register ********************/
+
+#define USB_OTG_DOEPCTL_MPSIZ 0x000007FFU /*!< Maximum packet size */ /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_USBAEP 0x00008000U /*!< USB active endpoint */
+#define USB_OTG_DOEPCTL_NAKSTS 0x00020000U /*!< NAK status */
+#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM 0x10000000U /*!< Set DATA0 PID */
+#define USB_OTG_DOEPCTL_SODDFRM 0x20000000U /*!< Set odd frame */
+#define USB_OTG_DOEPCTL_EPTYP 0x000C0000U /*!< Endpoint type */
+#define USB_OTG_DOEPCTL_EPTYP_0 0x00040000U /*!<Bit 0 */
+#define USB_OTG_DOEPCTL_EPTYP_1 0x00080000U /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_SNPM 0x00100000U /*!< Snoop mode */
+#define USB_OTG_DOEPCTL_STALL 0x00200000U /*!< STALL handshake */
+#define USB_OTG_DOEPCTL_CNAK 0x04000000U /*!< Clear NAK */
+#define USB_OTG_DOEPCTL_SNAK 0x08000000U /*!< Set NAK */
+#define USB_OTG_DOEPCTL_EPDIS 0x40000000U /*!< Endpoint disable */
+#define USB_OTG_DOEPCTL_EPENA 0x80000000U /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_DOEPINT register ********************/
+#define USB_OTG_DOEPINT_XFRC 0x00000001U /*!< Transfer completed interrupt */
+#define USB_OTG_DOEPINT_EPDISD 0x00000002U /*!< Endpoint disabled interrupt */
+#define USB_OTG_DOEPINT_STUP 0x00000008U /*!< SETUP phase done */
+#define USB_OTG_DOEPINT_OTEPDIS 0x00000010U /*!< OUT token received when endpoint disabled */
+#define USB_OTG_DOEPINT_B2BSTUP 0x00000040U /*!< Back-to-back SETUP packets received */
+#define USB_OTG_DOEPINT_NYET 0x00004000U /*!< NYET interrupt */
+
+/******************** Bit definition forUSB_OTG_DOEPTSIZ register ********************/
+
+#define USB_OTG_DOEPTSIZ_XFRSIZ 0x0007FFFFU /*!< Transfer size */
+#define USB_OTG_DOEPTSIZ_PKTCNT 0x1FF80000U /*!< Packet count */
+
+#define USB_OTG_DOEPTSIZ_STUPCNT 0x60000000U /*!< SETUP packet count */
+#define USB_OTG_DOEPTSIZ_STUPCNT_0 0x20000000U /*!<Bit 0 */
+#define USB_OTG_DOEPTSIZ_STUPCNT_1 0x40000000U /*!<Bit 1 */
+
+/******************** Bit definition for PCGCCTL register ********************/
+#define USB_OTG_PCGCCTL_STOPCLK 0x00000001U /*!< SETUP packet count */
+#define USB_OTG_PCGCCTL_GATECLK 0x00000002U /*!<Bit 0 */
+#define USB_OTG_PCGCCTL_PHYSUSP 0x00000010U /*!<Bit 1 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Stream0) || \
+ ((INSTANCE) == DMA1_Stream1) || \
+ ((INSTANCE) == DMA1_Stream2) || \
+ ((INSTANCE) == DMA1_Stream3) || \
+ ((INSTANCE) == DMA1_Stream4) || \
+ ((INSTANCE) == DMA1_Stream5) || \
+ ((INSTANCE) == DMA1_Stream6) || \
+ ((INSTANCE) == DMA1_Stream7) || \
+ ((INSTANCE) == DMA2_Stream0) || \
+ ((INSTANCE) == DMA2_Stream1) || \
+ ((INSTANCE) == DMA2_Stream2) || \
+ ((INSTANCE) == DMA2_Stream3) || \
+ ((INSTANCE) == DMA2_Stream4) || \
+ ((INSTANCE) == DMA2_Stream5) || \
+ ((INSTANCE) == DMA2_Stream6) || \
+ ((INSTANCE) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOH))
+
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2) || \
+ ((INSTANCE) == I2C3))
+
+/******************************** I2S Instances *******************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3))
+
+/*************************** I2S Extended Instances ***************************/
+#define IS_I2S_ALL_INSTANCE_EXT(PERIPH) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4))
+
+/*************************** SPI Extended Instances ***************************/
+#define IS_SPI_ALL_INSTANCE_EXT(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) ((INSTANCE) == TIM1)
+
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5))
+
+/***************** TIM Instances : external trigger input availabe ************/
+#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM4) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM5) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM9) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM10) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM11) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+
+/*********************** PCD Instances ****************************************/
+#define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+
+/*********************** HCD Instances ****************************************/
+#define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/****************************** SDIO Instances ********************************/
+#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO)
+
+/****************************** USB Exported Constants ************************/
+#define USB_OTG_FS_HOST_MAX_CHANNEL_NBR 8U
+#define USB_OTG_FS_MAX_IN_ENDPOINTS 4U /* Including EP0 */
+#define USB_OTG_FS_MAX_OUT_ENDPOINTS 4U /* Including EP0 */
+#define USB_OTG_FS_TOTAL_FIFO_SIZE 1280U /* in Bytes */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F401xE_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,264 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.5.0
+ * @date 22-April-2016
+ * @brief CMSIS STM32F4xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F4xx device used in the target application
+ * - To use or not the peripheral's drivers in application code(i.e.
+ * code will be based on direct access to peripheral's registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx
+ * @{
+ */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F4)
+#define STM32F4
+#endif /* STM32F4 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+ !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+ !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F410Tx) && !defined (STM32F410Cx) && \
+ !defined (STM32F410Rx) && !defined (STM32F411xE) && !defined (STM32F446xx) && !defined (STM32F469xx) && \
+ !defined (STM32F479xx) && !defined (STM32F412Cx) && !defined (STM32F412Rx) && !defined (STM32F412Vx) && \
+ !defined (STM32F412Zx)
+ /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+ /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+ /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */
+ /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+ /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+ /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+ /* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
+ STM32F439NI, STM32F429IG and STM32F429II Devices */
+ /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
+ STM32F439NI, STM32F439IG and STM32F439II Devices */
+ /* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+ #define STM32F401xE /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+ /* #define STM32F410Tx */ /*!< STM32F410T8 and STM32F410TB Devices */
+ /* #define STM32F410Cx */ /*!< STM32F410C8 and STM32F410CB Devices */
+ /* #define STM32F410Rx */ /*!< STM32F410R8 and STM32F410RB Devices */
+ /* #define STM32F411xE */ /*!< STM32F411CC, STM32F411RC, STM32F411VC, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+ /* #define STM32F446xx */ /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC,
+ and STM32F446ZE Devices */
+ /* #define STM32F469xx */ /*!< STM32F469AI, STM32F469II, STM32F469BI, STM32F469NI, STM32F469AG, STM32F469IG, STM32F469BG,
+ STM32F469NG, STM32F469AE, STM32F469IE, STM32F469BE and STM32F469NE Devices */
+ /* #define STM32F479xx */ /*!< STM32F479AI, STM32F479II, STM32F479BI, STM32F479NI, STM32F479AG, STM32F479IG, STM32F479BG
+ and STM32F479NG Devices */
+ /* #define STM32F412Cx */ /*!< STM32F412CEU and STM32F412CGU Devices */
+ /* #define STM32F412Zx */ /*!< STM32F412ZET, STM32F412ZGT, STM32F412ZEJ and STM32F412ZGJ Devices */
+ /* #define STM32F412Vx */ /*!< STM32F412VET, STM32F412VGT, STM32F412VEH and STM32F412VGH Devices */
+ /* #define STM32F412Rx */ /*!< STM32F412RET, STM32F412RGT, STM32F412REY and STM32F412RGY Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ #define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS version number V2.5.0
+ */
+#define __STM32F4xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_VERSION_SUB1 (0x05U) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
+#define __STM32F4xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
+#define __STM32F4xx_CMSIS_VERSION ((__STM32F4xx_CMSIS_VERSION_MAIN << 24)\
+ |(__STM32F4xx_CMSIS_VERSION_SUB1 << 16)\
+ |(__STM32F4xx_CMSIS_VERSION_SUB2 << 8 )\
+ |(__STM32F4xx_CMSIS_VERSION))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F405xx)
+ #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+ #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+ #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+ #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+ #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+ #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+ #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+ #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+ #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+ #include "stm32f401xe.h"
+#elif defined(STM32F410Tx)
+ #include "stm32f410tx.h"
+#elif defined(STM32F410Cx)
+ #include "stm32f410cx.h"
+#elif defined(STM32F410Rx)
+ #include "stm32f410rx.h"
+#elif defined(STM32F411xE)
+ #include "stm32f411xe.h"
+#elif defined(STM32F446xx)
+ #include "stm32f446xx.h"
+#elif defined(STM32F469xx)
+ #include "stm32f469xx.h"
+#elif defined(STM32F479xx)
+ #include "stm32f479xx.h"
+#elif defined(STM32F412Cx)
+ #include "stm32f412cx.h"
+#elif defined(STM32F412Zx)
+ #include "stm32f412zx.h"
+#elif defined(STM32F412Rx)
+ #include "stm32f412rx.h"
+#elif defined(STM32F412Vx)
+ #include "stm32f412vx.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0U,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0U,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0U,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,449 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf.h
+ * @author MCD Application Team
+ * @version V1.4.4
+ * @date 22-January-2016
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32f4xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_DSI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_FMPI2C_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)32000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)200U) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)320000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 1U
+#define INSTRUCTION_CACHE_ENABLE 1U
+#define DATA_CACHE_ENABLE 1U
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2U
+#define MAC_ADDR1 0U
+#define MAC_ADDR2 0U
+#define MAC_ADDR3 0U
+#define MAC_ADDR4 0U
+#define MAC_ADDR5 0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS 0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x0010U) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x0011U) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x0012U) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001U) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002U) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001U) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020U) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000U) /*!< PHY link status interrupt mask */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,952 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.c
+ * @author MCD Application Team
+ * @version V2.5.0
+ * @date 22-April-2016
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f4xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * This file configures the system clock as follows:
+ *-----------------------------------------------------------------------------
+ * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
+ * | (external 8 MHz clock) | (internal 16 MHz)
+ * | 2- PLL_HSE_XTAL |
+ * | (external 8 MHz xtal) |
+ *-----------------------------------------------------------------------------
+ * SYSCLK(MHz) | 84 | 84
+ *-----------------------------------------------------------------------------
+ * AHBCLK (MHz) | 84 | 84
+ *-----------------------------------------------------------------------------
+ * APB1CLK (MHz) | 42 | 42
+ *-----------------------------------------------------------------------------
+ * APB2CLK (MHz) | 84 | 84
+ *-----------------------------------------------------------------------------
+ * USB capable (48 MHz precise clock) | YES | NO
+ *-----------------------------------------------------------------------------
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f4xx.h"
+#include "hal_tick.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)32000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+ STM32F412Zx || STM32F412Vx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+ * @{
+ */
+
+/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
+#define USE_PLL_HSE_EXTC (1) /* Use external clock */
+#define USE_PLL_HSE_XTAL (0) /* Use external xtal */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+uint32_t SystemCoreClock = 84000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+uint8_t SetSysClock_PLL_HSI(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting, vector table location and External memory
+ * configuration.
+ * @param None
+ * @retval None
+ */
+
+
+ void SetSysClock(void)
+{
+ /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+ if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+ {
+ /* 2- If fail try to start with HSE and external xtal */
+ #if USE_PLL_HSE_XTAL != 0
+ if (SetSysClock_PLL_HSE(0) == 0)
+ #endif
+ {
+ /* 3- If fail start with HSI clock */
+ if (SetSysClock_PLL_HSI() == 0)
+ {
+ while(1)
+ {
+ // [TODO] Put something here to tell the user that a problem occured...
+ }
+ }
+ }
+ }
+
+ /* Output clock on MCO2 pin(PC9) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_1); // 84 MHz
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/* PLL (clocked by HSE) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+ /* Enable HSE oscillator and activate PLL with HSE as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ if (bypass == 0)
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */
+ }
+ else
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */
+ }
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (8 MHz / 8)
+ RCC_OscInitStruct.PLL.PLLN = 168; // VCO output clock = 336 MHz (1 MHz * 336)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> OK for USB
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ /*
+ if (bypass == 0)
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
+ else
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
+ */
+
+ return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/* PLL (clocked by HSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+ /* Enable HSI oscillator and activate PLL with HSI as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSICalibrationValue = 16;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16)
+ RCC_OscInitStruct.PLL.PLLN = 192; // VCO output clock = 336 MHz (1 MHz * 336)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; // PLLCLK = 84 MHz (336 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLQ = 4; // USB clock = 48 MHz (336 MHz / 7) --> freq is ok but not precise enough
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
+
+ return 1; // OK
+}
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+ /* Configure the Cube driver */
+ SystemCoreClock = 16000000; // At this stage the HSI is used as system clock
+ __HAL_REMAPMEMORY_SYSTEMFLASH();
+
+
+
+
+
+ HAL_Init();
+ NVIC_DisableIRQ;
+ __GPIOA_CLK_ENABLE();
+ GPIO_InitTypeDef GPIO_InitStruct;
+ GPIO_InitStruct.Pin = GPIO_PIN_0;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, GPIO_PIN_SET);
+ for (int i = 0;i<100000;i++){__NOP;}
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, GPIO_PIN_RESET);
+ /* Configure the System clock source, PLL Multiplier and Divider factors,
+ AHB/APBx prescalers and Flash settings */
+ for (int i = 0;i<100000;i++){__NOP;}
+ SetSysClock();
+//
+// /* Reset the timer to avoid issues after the RAM initialization */
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+ NVIC_EnableIRQ;
+
+
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+ * depends on the application requirements), user has to ensure that HSE_VALUE
+ * is same as the real frequency of the crystal used. Otherwise, this function
+ * may have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+ SYSCLK = PLL_VCO / PLL_P
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ SystemCoreClock = pllvco/pllp;
+ break;
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK frequency --------------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK frequency */
+ SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||defined(STM32F469xx) || defined(STM32F479xx)
+
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f4xx.s before jump to main.
+ * This function configures the external memories (SRAM/SDRAM)
+ * This SRAM/SDRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmp = 0x00;
+
+ register uint32_t tmpreg = 0, timeout = 0xFFFF;
+ register __IO uint32_t index;
+
+ /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+ RCC->AHB1ENR |= 0x000001F8;
+
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x00CCC0CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A8A;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0FCF;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00CC0CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA828A;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC3CF;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0xCCCCCCCC;
+ GPIOF->AFR[1] = 0xCCCCCCCC;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA800AAA;
+ /* Configure PFx pins speed to 50 MHz */
+ GPIOF->OSPEEDR = 0xAA800AAA;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0xCCCCCCCC;
+ GPIOG->AFR[1] = 0xCCCCCCCC;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0xAAAAAAAA;
+ /* Configure PGx pins speed to 50 MHz */
+ GPIOG->OSPEEDR = 0xAAAAAAAA;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+ /* Connect PHx pins to FMC Alternate function */
+ GPIOH->AFR[0] = 0x00C0CC00;
+ GPIOH->AFR[1] = 0xCCCCCCCC;
+ /* Configure PHx pins in Alternate function mode */
+ GPIOH->MODER = 0xAAAA08A0;
+ /* Configure PHx pins speed to 50 MHz */
+ GPIOH->OSPEEDR = 0xAAAA08A0;
+ /* Configure PHx pins Output type to push-pull */
+ GPIOH->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PHx pins */
+ GPIOH->PUPDR = 0x00000000;
+
+ /* Connect PIx pins to FMC Alternate function */
+ GPIOI->AFR[0] = 0xCCCCCCCC;
+ GPIOI->AFR[1] = 0x00000CC0;
+ /* Configure PIx pins in Alternate function mode */
+ GPIOI->MODER = 0x0028AAAA;
+ /* Configure PIx pins speed to 50 MHz */
+ GPIOI->OSPEEDR = 0x0028AAAA;
+ /* Configure PIx pins Output type to push-pull */
+ GPIOI->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PIx pins */
+ GPIOI->PUPDR = 0x00000000;
+
+/*-- FMC Configuration -------------------------------------------------------*/
+ /* Enable the FMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+ FMC_Bank5_6->SDCR[0] = 0x000019E4;
+ FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+ /* SDRAM initialization sequence */
+ /* Clock enable command */
+ FMC_Bank5_6->SDCMR = 0x00000011;
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Delay */
+ for (index = 0; index<1000; index++);
+
+ /* PALL command */
+ FMC_Bank5_6->SDCMR = 0x00000012;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Auto refresh command */
+ FMC_Bank5_6->SDCMR = 0x00000073;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* MRD register program */
+ FMC_Bank5_6->SDCMR = 0x00046014;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Set refresh count */
+ tmpreg = FMC_Bank5_6->SDRTR;
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+
+ /* Disable write protection */
+ tmpreg = FMC_Bank5_6->SDCR[0];
+ FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001011;
+ FMC_Bank1->BTCR[3] = 0x00000201;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001091;
+ FMC_Bank1->BTCR[3] = 0x00110212;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+ (void)(tmp);
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f4xx.s before jump to main.
+ * This function configures the external memories (SRAM/SDRAM)
+ * This SRAM/SDRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+ register uint32_t tmpreg = 0, timeout = 0xFFFF;
+ register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+ /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+ clock */
+ RCC->AHB1ENR |= 0x0000007D;
+#else
+ /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+ clock */
+ RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+#if defined(STM32F446xx)
+ /* Connect PAx pins to FMC Alternate function */
+ GPIOA->AFR[0] |= 0xC0000000;
+ GPIOA->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOA->MODER |= 0x00008000;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOA->OSPEEDR |= 0x00008000;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOA->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOA->PUPDR |= 0x00000000;
+
+ /* Connect PCx pins to FMC Alternate function */
+ GPIOC->AFR[0] |= 0x00CC0000;
+ GPIOC->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOC->MODER |= 0x00000A00;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOC->OSPEEDR |= 0x00000A00;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOC->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOC->PUPDR |= 0x00000000;
+#endif /* STM32F446xx */
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x000000CC;
+ GPIOD->AFR[1] = 0xCC000CCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xA02A000A;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOD->OSPEEDR = 0xA02A000A;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00000CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA800A;
+ /* Configure PEx pins speed to 50 MHz */
+ GPIOE->OSPEEDR = 0xAAAA800A;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0xCCCCCCCC;
+ GPIOF->AFR[1] = 0xCCCCCCCC;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA800AAA;
+ /* Configure PFx pins speed to 50 MHz */
+ GPIOF->OSPEEDR = 0xAA800AAA;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0xCCCCCCCC;
+ GPIOG->AFR[1] = 0xCCCCCCCC;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0xAAAAAAAA;
+ /* Configure PGx pins speed to 50 MHz */
+ GPIOG->OSPEEDR = 0xAAAAAAAA;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+ /* Connect PHx pins to FMC Alternate function */
+ GPIOH->AFR[0] = 0x00C0CC00;
+ GPIOH->AFR[1] = 0xCCCCCCCC;
+ /* Configure PHx pins in Alternate function mode */
+ GPIOH->MODER = 0xAAAA08A0;
+ /* Configure PHx pins speed to 50 MHz */
+ GPIOH->OSPEEDR = 0xAAAA08A0;
+ /* Configure PHx pins Output type to push-pull */
+ GPIOH->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PHx pins */
+ GPIOH->PUPDR = 0x00000000;
+
+ /* Connect PIx pins to FMC Alternate function */
+ GPIOI->AFR[0] = 0xCCCCCCCC;
+ GPIOI->AFR[1] = 0x00000CC0;
+ /* Configure PIx pins in Alternate function mode */
+ GPIOI->MODER = 0x0028AAAA;
+ /* Configure PIx pins speed to 50 MHz */
+ GPIOI->OSPEEDR = 0x0028AAAA;
+ /* Configure PIx pins Output type to push-pull */
+ GPIOI->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PIx pins */
+ GPIOI->PUPDR = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+/*-- FMC Configuration -------------------------------------------------------*/
+ /* Enable the FMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+ /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else
+ FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+ FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+ /* SDRAM initialization sequence */
+ /* Clock enable command */
+ FMC_Bank5_6->SDCMR = 0x00000011;
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Delay */
+ for (index = 0; index<1000; index++);
+
+ /* PALL command */
+ FMC_Bank5_6->SDCMR = 0x00000012;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Auto refresh command */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x000000F3;
+#else
+ FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* MRD register program */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x00044014;
+#else
+ FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Set refresh count */
+ tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+
+ /* Disable write protection */
+ tmpreg = FMC_Bank5_6->SDCR[0];
+ FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+ RCC->AHB1ENR |= 0x00000078;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x00CCC0CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A8A;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0FCF;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00CC0CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA828A;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC3CF;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0x00CCCCCC;
+ GPIOF->AFR[1] = 0xCCCC0000;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA000AAA;
+ /* Configure PFx pins speed to 100 MHz */
+ GPIOF->OSPEEDR = 0xFF000FFF;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0x00CCCCCC;
+ GPIOG->AFR[1] = 0x000000C0;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0x00085AAA;
+ /* Configure PGx pins speed to 100 MHz */
+ GPIOG->OSPEEDR = 0x000CAFFF;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+ /* Enable the FMC/FSMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001011;
+ FMC_Bank1->BTCR[3] = 0x00000201;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001091;
+ FMC_Bank1->BTCR[3] = 0x00110212;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+ || defined(STM32F412Zx) || defined(STM32F412Vx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FSMC_Bank1->BTCR[2] = 0x00001011;
+ FSMC_Bank1->BTCR[3] = 0x00000201;
+ FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
+ (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+
+/**
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,124 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.5.0
+ * @date 22-April-2016
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F4XX_H
+#define __SYSTEM_STM32F4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F4xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F4xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F4XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32_hal_legacy.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32_hal_legacy.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,3123 @@
+/**
+ ******************************************************************************
+ * @file stm32_hal_legacy.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file contains aliases definition for the STM32Cube HAL constants
+ * macros and functions maintained for legacy purpose.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_HAL_LEGACY
+#define __STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define AES_FLAG_RDERR CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP ADC_REGULAR_GROUP
+#define INJECTED_GROUP ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT ADC_AWD_EVENT
+#define AWD1_EVENT ADC_AWD1_EVENT
+#define AWD2_EVENT ADC_AWD2_EVENT
+#define AWD3_EVENT ADC_AWD3_EVENT
+#define OVR_EVENT ADC_OVR_EVENT
+#define JQOVF_EVENT ADC_JQOVF_EVENT
+#define ALL_CHANNELS ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5
+
+#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32L0) || defined(STM32L4)
+#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1
+#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2
+#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3
+
+#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT
+#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3
+#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4
+#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5
+
+#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW
+#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH
+
+/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */
+/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */
+#if defined(COMP_CSR_LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_LOCK
+#elif defined(COMP_CSR_COMP1LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK
+#elif defined(COMP_CSR_COMPxLOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK
+#endif
+
+#if defined(STM32L4)
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2
+#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2
+#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2
+#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE
+#endif
+
+#if defined(STM32L0)
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER
+#else
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED
+#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER
+#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER
+#endif
+
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1
+#define DAC_WAVE_NONE ((uint32_t)0x00000000U)
+#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5
+#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4
+#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7
+#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67
+#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76
+#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6
+#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7
+#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6
+
+#define IS_HAL_REMAPDMA IS_DMA_REMAP
+#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE
+
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW OB_IWDG_SW
+#define OB_WDG_HW OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
+/**
+ * @}
+ */
+
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+ * @{
+ */
+#if defined(STM32L4) || defined(STM32F7)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16
+#else
+#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+ * @}
+ */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define GET_GPIO_SOURCE GPIO_GET_INDEX
+#define GET_GPIO_INDEX GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7)
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 */
+
+#if defined(STM32L1)
+ #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L1 */
+
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F0 || STM32F3 || STM32F1 */
+
+#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+
+#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define KR_KEY_RELOAD IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE IWDG_KEY_ENABLE
+#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b
+#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b
+#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b
+#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b
+
+#define NAND_AddressTypedef NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE NOR_WRITE
+#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+#if defined(STM32F7)
+ #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ATA_DATA
+#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD ATA_CARD_HEAD
+#define CF_STATUS_CMD ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FORMAT_BIN RTC_FORMAT_BIN
+#define FORMAT_BCD RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+
+#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
+#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
+#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1 TIM_DMABASE_CR1
+#define TIM_DMABase_CR2 TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER TIM_DMABASE_DIER
+#define TIM_DMABase_SR TIM_DMABASE_SR
+#define TIM_DMABase_EGR TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER TIM_DMABASE_CCER
+#define TIM_DMABase_CNT TIM_DMABASE_CNT
+#define TIM_DMABase_PSC TIM_DMABASE_PSC
+#define TIM_DMABase_ARR TIM_DMABASE_ARR
+#define TIM_DMABase_RCR TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1 TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2 TIM_DMABASE_OR2
+#define TIM_DMABase_OR3 TIM_DMABASE_OR3
+#define TIM_DMABase_OR TIM_DMABASE_OR
+
+#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
+
+#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED USART_NACK_ENABLE
+#define USARTNACK_DISABLED USART_NACK_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CFR_BASE WWDG_CFR_BASE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U)
+#define CAN_TXSTATUS_OK ((uint8_t)0x01U)
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define VLAN_TAG ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR ((uint32_t)0x00000100U)
+#define ETH_MMCRIR ((uint32_t)0x00000104U)
+#define ETH_MMCTIR ((uint32_t)0x00000108U)
+#define ETH_MMCRIMR ((uint32_t)0x0000010CU)
+#define ETH_MMCTIMR ((uint32_t)0x00000110U)
+#define ETH_MMCTGFSCCR ((uint32_t)0x0000014CU)
+#define ETH_MMCTGFMSCCR ((uint32_t)0x00000150U)
+#define ETH_MMCTGFCR ((uint32_t)0x00000168U)
+#define ETH_MMCRFCECR ((uint32_t)0x00000194U)
+#define ETH_MMCRFAECR ((uint32_t)0x00000198U)
+#define ETH_MMCRGUFCR ((uint32_t)0x000001C4U)
+
+#define ETH_MAC_TXFIFO_FULL ((uint32_t)0x02000000) /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY ((uint32_t)0x01000000) /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE ((uint32_t)0x00400000) /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE ((uint32_t)0x00000000) /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ ((uint32_t)0x00100000) /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING ((uint32_t)0x00200000) /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING ((uint32_t)0x00300000) /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE ((uint32_t)0x00080000) /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE ((uint32_t)0x00000000) /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING ((uint32_t)0x00020000) /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF ((uint32_t)0x00040000) /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING ((uint32_t)0x00060000) /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE ((uint32_t)0x00010000) /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY ((uint32_t)0x00000000) /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD ((uint32_t)0x00000100) /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD ((uint32_t)0x00000200) /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL ((uint32_t)0x00000300) /* Rx FIFO fill level: full */
+#if defined(STM32F1)
+#else
+#define ETH_MAC_READCONTROLLER_IDLE ((uint32_t)0x00000000) /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA ((uint32_t)0x00000020) /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS ((uint32_t)0x00000040) /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#endif
+#define ETH_MAC_READCONTROLLER_FLUSHING ((uint32_t)0x00000060) /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE ((uint32_t)0x00000010) /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE ((uint32_t)0x00000000) /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE ((uint32_t)0x00000002) /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004) /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE ((uint32_t)0x00000006) /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE ((uint32_t)0x00000001) /* MAC MII receive protocol engine active */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR
+#define DCMI_IT_OVF DCMI_IT_OVR
+#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI
+#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI
+
+#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop
+#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop
+#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop
+
+/**
+ * @}
+ */
+
+#if defined(STM32L4xx) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888
+#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888
+#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565
+#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555
+#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444
+
+#define CM_ARGB8888 DMA2D_INPUT_ARGB8888
+#define CM_RGB888 DMA2D_INPUT_RGB888
+#define CM_RGB565 DMA2D_INPUT_RGB565
+#define CM_ARGB1555 DMA2D_INPUT_ARGB1555
+#define CM_ARGB4444 DMA2D_INPUT_ARGB4444
+#define CM_L8 DMA2D_INPUT_L8
+#define CM_AL44 DMA2D_INPUT_AL44
+#define CM_AL88 DMA2D_INPUT_AL88
+#define CM_L4 DMA2D_INPUT_L4
+#define CM_A8 DMA2D_INPUT_A8
+#define CM_A4 DMA2D_INPUT_A4
+/**
+ * @}
+ */
+#endif /* STM32L4xx || STM32F7*/
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#if defined(STM32L0)
+#else
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#endif
+#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
+#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
+#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+ * @{
+ */
+#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
+
+#define DBP_BitNumber DBP_BIT_NUMBER
+#define PVDE_BitNumber PVDE_BIT_NUMBER
+#define PMODE_BitNumber PMODE_BIT_NUMBER
+#define EWUP_BitNumber EWUP_BIT_NUMBER
+#define FPDS_BitNumber FPDS_BIT_NUMBER
+#define ODEN_BitNumber ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
+#define BRE_BitNumber BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError TIM_DMAError
+#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define AES_IT_CC CRYP_IT_CC
+#define AES_IT_ERR CRYP_IT_ERR
+#define AES_FLAG_CCF CRYP_FLAG_CCF
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
+
+#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __ADC_ENABLE __HAL_ADC_ENABLE
+#define __ADC_DISABLE __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
+#define __ADC_IS_ENABLED ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1 ADC_SQR1
+#define __HAL_ADC_SMPR1 ADC_SMPR1
+#define __HAL_ADC_SMPR2 ADC_SMPR2
+#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32F3)
+#define COMP_START __HAL_COMP_ENABLE
+#define COMP_STOP __HAL_COMP_DISABLE
+#define COMP_LOCK __HAL_COMP_LOCK
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
+
+#if defined(STM32L0) || defined(STM32L4)
+/* Note: On these STM32 families, the only argument of this macro */
+/* is COMP_FLAG_LOCK. */
+/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */
+/* argument. */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__))
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32L0) || defined(STM32L4)
+/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_WRPAREA IS_OB_WRPAREA
+#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE IS_FLASH_TYPEERASE
+#define IS_NBSECTORS IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
+#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
+#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
+#define __HAL_I2C_SPEED I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __IRDA_DISABLE __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+ * @{
+ */
+
+#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE __HAL_RCC_USART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE __HAL_RCC_USART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_USART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_USART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET __HAL_RCC_USART4_FORCE_RESET
+#define __USART4_RELEASE_RESET __HAL_RCC_USART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE __HAL_RCC_USART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE __HAL_RCC_USART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_USART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_USART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET __HAL_RCC_USART5_FORCE_RESET
+#define __USART5_RELEASE_RESET __HAL_RCC_USART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE __HAL_RCC_USART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE __HAL_RCC_USART7_CLK_ENABLE
+#define __USART7_FORCE_RESET __HAL_RCC_USART7_FORCE_RESET
+#define __USART7_RELEASE_RESET __HAL_RCC_USART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE __HAL_RCC_USART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE __HAL_RCC_USART8_CLK_ENABLE
+#define __USART8_FORCE_RESET __HAL_RCC_USART8_FORCE_RESET
+#define __USART8_RELEASE_RESET __HAL_RCC_USART8_RELEASE_RESET
+#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14 RCC_IT_HSI14RDY
+
+#if defined(STM32L0)
+#define RCC_IT_LSECSS RCC_IT_CSSLSE
+#define RCC_IT_CSS RCC_IT_CSSHSE
+#endif
+
+#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV RCC_MCODIV_1
+#define RCC_MCO_DIV1 RCC_MCODIV_1
+#define RCC_MCO_DIV2 RCC_MCODIV_2
+#define RCC_MCO_DIV4 RCC_MCODIV_4
+#define RCC_MCO_DIV8 RCC_MCODIV_8
+#define RCC_MCO_DIV16 RCC_MCODIV_16
+#define RCC_MCO_DIV32 RCC_MCODIV_32
+#define RCC_MCO_DIV64 RCC_MCODIV_64
+#define RCC_MCO_DIV128 RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
+
+#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB RCC_CR_HSION_BB
+#define CR_CSSON_BB RCC_CR_CSSON_BB
+#define CR_PLLON_BB RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB RCC_CR_MSION_BB
+#define CSR_LSION_BB RCC_CSR_LSION_BB
+#define CSR_LSEON_BB RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB RCC_CR_HSEON_BB
+#define CSR_RMVF_BB RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT
+
+#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN
+#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF
+
+#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48
+#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ
+#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP
+#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ
+#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE
+#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48
+
+#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE
+#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED
+#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET
+#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET
+#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
+#define DfsdmClockSelection Dfsdm1ClockSelection
+#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1
+#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK
+#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK
+#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG
+#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif /* STM32F1 */
+
+#define IS_ALARM IS_RTC_ALARM
+#define IS_ALARM_MASK IS_RTC_ALARM_MASK
+#define IS_TAMPER IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4)
+#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
+#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
+#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED
+#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION
+#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND
+#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT
+#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED
+#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE
+#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE
+#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE
+#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
+#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT
+#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT
+#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG
+#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG
+#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT
+#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT
+#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS
+#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT
+#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define SDMMC1_IRQn SDIO_IRQn
+#define SDMMC1_IRQHandler SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define SD_SDIO_DISABLED SD_SDMMC_DISABLED
+#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY
+#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED
+#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION
+#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND
+#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT
+#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED
+#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE
+#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE
+#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE
+#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE
+#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT
+#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT
+#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG
+#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG
+#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT
+#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT
+#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS
+#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT
+#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define SDIO_IRQn SDMMC1_IRQn
+#define SDIO_IRQHandler SDMMC1_IRQHandler
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
+#define __USART_ENABLE __HAL_USART_ENABLE
+#define __USART_DISABLE __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
+
+#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
+#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1
+#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,532 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief HAL module driver.
+ * This is the common part of the HAL initialization
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The common HAL driver contains a set of generic and common APIs that can be
+ used by the PPP peripheral drivers and the user to start using the HAL.
+ [..]
+ The HAL contains two APIs' categories:
+ (+) Common HAL APIs
+ (+) Services HAL APIs
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL HAL
+ * @brief HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Constants
+ * @{
+ */
+/**
+ * @brief STM32F4xx HAL Driver version number V1.5.0
+ */
+#define __STM32F4xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F4xx_HAL_VERSION_SUB1 (0x05) /*!< [23:16] sub1 version */
+#define __STM32F4xx_HAL_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F4xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\
+ |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\
+ |(__STM32F4xx_HAL_VERSION_SUB2 << 8U )\
+ |(__STM32F4xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFFU)
+
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
+/* --- MEMRMP Register ---*/
+/* Alias word address of UFB_MODE bit */
+#define MEMRMP_OFFSET SYSCFG_OFFSET
+#define UFB_MODE_BIT_NUMBER POSITION_VAL(SYSCFG_MEMRMP_UFB_MODE)
+#define UFB_MODE_BB (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (UFB_MODE_BIT_NUMBER * 4U))
+
+/* --- CMPCR Register ---*/
+/* Alias word address of CMP_PD bit */
+#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20U)
+#define CMP_PD_BIT_NUMBER POSITION_VAL(SYSCFG_CMPCR_CMP_PD)
+#define CMPCR_CMP_PD_BB (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32U) + (CMP_PD_BIT_NUMBER * 4U))
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup HAL_Private_Variables
+ * @{
+ */
+__IO uint32_t uwTick;
+/**
+ * @}
+ */
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initializes the Flash interface the NVIC allocation and initial clock
+ configuration. It initializes the systick also when timeout is needed
+ and the backup domain when enabled.
+ (+) de-Initializes common part of the HAL
+ (+) Configure The time base source to have 1ms time base with a dedicated
+ Tick interrupt priority.
+ (++) Systick timer is used by default as source of time base, but user
+ can eventually implement his proper time base source (a general purpose
+ timer for example or other time source), keeping in mind that Time base
+ duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+ handled in milliseconds basis.
+ (++) Time base configuration function (HAL_InitTick ()) is called automatically
+ at the beginning of the program after reset by HAL_Init() or at any time
+ when clock is configured, by HAL_RCC_ClockConfig().
+ (++) Source of time base is configured to generate interrupts at regular
+ time intervals. Care must be taken if HAL_Delay() is called from a
+ peripheral ISR process, the Tick interrupt line must have higher priority
+ (numerically lower) than the peripheral interrupt. Otherwise the caller
+ ISR process will be blocked.
+ (++) functions affecting time base configurations are declared as __weak
+ to make override possible in case of other implementations in user file.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function is used to initialize the HAL Library; it must be the first
+ * instruction to be executed in the main program (before to call any other
+ * HAL function), it performs the following:
+ * Configure the Flash prefetch, instruction and Data caches.
+ * Configures the SysTick to generate an interrupt each 1 millisecond,
+ * which is clocked by the HSI (at this stage, the clock is not yet
+ * configured and thus the system is running from the internal HSI at 16 MHz).
+ * Set NVIC Group Priority to 4.
+ * Calls the HAL_MspInit() callback function defined in user file
+ * "stm32f4xx_hal_msp.c" to do the global low level hardware initialization
+ *
+ * @note SysTick is used as time base for the HAL_Delay() function, the application
+ * need to ensure that the SysTick time base is always set to 1 millisecond
+ * to have correct HAL operation.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_Init(void)
+{
+ /* Configure Flash prefetch, Instruction cache, Data cache */
+#if (INSTRUCTION_CACHE_ENABLE != 0U)
+ __HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
+#endif /* INSTRUCTION_CACHE_ENABLE */
+
+#if (DATA_CACHE_ENABLE != 0U)
+ __HAL_FLASH_DATA_CACHE_ENABLE();
+#endif /* DATA_CACHE_ENABLE */
+
+#if (PREFETCH_ENABLE != 0U)
+ __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+ /* Set Interrupt Group Priority */
+ HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+ /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+ HAL_InitTick(TICK_INT_PRIORITY);
+
+ /* Init the low level hardware */
+ HAL_MspInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function de-Initializes common part of the HAL and stops the systick.
+ * This function is optional.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+ /* Reset of all peripherals */
+ __HAL_RCC_APB1_FORCE_RESET();
+ __HAL_RCC_APB1_RELEASE_RESET();
+
+ __HAL_RCC_APB2_FORCE_RESET();
+ __HAL_RCC_APB2_RELEASE_RESET();
+
+ __HAL_RCC_AHB1_FORCE_RESET();
+ __HAL_RCC_AHB1_RELEASE_RESET();
+
+ __HAL_RCC_AHB2_FORCE_RESET();
+ __HAL_RCC_AHB2_RELEASE_RESET();
+
+ __HAL_RCC_AHB3_FORCE_RESET();
+ __HAL_RCC_AHB3_RELEASE_RESET();
+
+ /* De-Init the low level hardware */
+ HAL_MspDeInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspInit(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspDeInit(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function configures the source of the time base.
+ * The time source is configured to have 1ms time base with a dedicated
+ * Tick interrupt priority.
+ * @note This function is called automatically at the beginning of program after
+ * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
+ * @note In the default implementation, SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals.
+ * Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+ * The the SysTick interrupt must have higher priority (numerically lower)
+ * than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+ * The function is declared as __weak to be overwritten in case of other
+ * implementation in user file.
+ * @param TickPriority: Tick interrupt priority.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+ /*Configure the SysTick to have interrupt in 1ms time basis*/
+ HAL_SYSTICK_Config(SystemCoreClock/1000U);
+
+ /*Configure the SysTick IRQ priority */
+ HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0U);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### HAL Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Provide a tick value in millisecond
+ (+) Provide a blocking delay in millisecond
+ (+) Suspend the time base source interrupt
+ (+) Resume the time base source interrupt
+ (+) Get the HAL API driver version
+ (+) Get the device identifier
+ (+) Get the device revision identifier
+ (+) Enable/Disable Debug module during SLEEP mode
+ (+) Enable/Disable Debug module during STOP mode
+ (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function is called to increment a global variable "uwTick"
+ * used as application time base.
+ * @note In the default implementation, this variable is incremented each 1ms
+ * in Systick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_IncTick(void)
+{
+ uwTick++;
+}
+
+/**
+ * @brief Provides a tick value in millisecond.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval tick value
+ */
+__weak uint32_t HAL_GetTick(void)
+{
+ return uwTick;
+}
+
+/**
+ * @brief This function provides accurate delay (in milliseconds) based
+ * on variable incremented.
+ * @note In the default implementation , SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals where uwTick
+ * is incremented.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @param Delay: specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+__weak void HAL_Delay(__IO uint32_t Delay)
+{
+ uint32_t tickstart = 0U;
+ tickstart = HAL_GetTick();
+ while((HAL_GetTick() - tickstart) < Delay)
+ {
+ }
+}
+
+/**
+ * @brief Suspend Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+ * is called, the SysTick interrupt will be disabled and so Tick increment
+ * is suspended.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_SuspendTick(void)
+{
+ /* Disable SysTick Interrupt */
+ SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+ * @brief Resume Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+ * is called, the SysTick interrupt will be enabled and so Tick increment
+ * is resumed.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_ResumeTick(void)
+{
+ /* Enable SysTick Interrupt */
+ SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+ * @brief Returns the HAL revision
+ * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+ */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F4xx_HAL_VERSION;
+}
+
+/**
+ * @brief Returns the device revision identifier.
+ * @retval Device revision identifier
+ */
+uint32_t HAL_GetREVID(void)
+{
+ return((DBGMCU->IDCODE) >> 16U);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @retval Device identifier
+ */
+uint32_t HAL_GetDEVID(void)
+{
+ return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @brief Enable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Disable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Enable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Disable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Enable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Disable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Enables the I/O Compensation Cell.
+ * @note The I/O compensation cell can be used only when the device supply
+ * voltage ranges from 2.4 to 3.6 V.
+ * @retval None
+ */
+void HAL_EnableCompensationCell(void)
+{
+ *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Power-down the I/O Compensation Cell.
+ * @note The I/O compensation cell can be used only when the device supply
+ * voltage ranges from 2.4 to 3.6 V.
+ * @retval None
+ */
+void HAL_DisableCompensationCell(void)
+{
+ *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE;
+}
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Enables the Internal FLASH Bank Swapping.
+ *
+ * @note This function can be used only for STM32F42xxx/43xxx devices.
+ *
+ * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
+ * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)
+ *
+ * @retval None
+ */
+void HAL_EnableMemorySwappingBank(void)
+{
+ *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Internal FLASH Bank Swapping.
+ *
+ * @note This function can be used only for STM32F42xxx/43xxx devices.
+ *
+ * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000)
+ * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000)
+ *
+ * @retval None
+ */
+void HAL_DisableMemorySwappingBank(void)
+{
+
+ *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE;
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,265 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_H
+#define __STM32F4xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_conf.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @brief Freeze/Unfreeze Peripherals in Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
+
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
+ }while(0);
+
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+
+/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
+ }while(0);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
+ * @{
+ */
+/** @brief SYSCFG Break Lockup lock
+ * Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+
+/** @defgroup PVD_Lock_Enable PVD Lock
+ * @{
+ */
+/** @brief SYSCFG Break PVD lock
+ * Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions
+ * @{
+ */
+/** @addtogroup HAL_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+uint32_t HAL_GetTick(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+void HAL_EnableMemorySwappingBank(void);
+void HAL_DisableMemorySwappingBank(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1672 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the Analog to Digital Convertor (ADC) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + State and errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### ADC Peripheral features #####
+ ==============================================================================
+ [..]
+ (#) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution.
+ (#) Interrupt generation at the end of conversion, end of injected conversion,
+ and in case of analog watchdog or overrun events
+ (#) Single and continuous conversion modes.
+ (#) Scan mode for automatic conversion of channel 0 to channel x.
+ (#) Data alignment with in-built data coherency.
+ (#) Channel-wise programmable sampling time.
+ (#) External trigger option with configurable polarity for both regular and
+ injected conversion.
+ (#) Dual/Triple mode (on devices with 2 ADCs or more).
+ (#) Configurable DMA data storage in Dual/Triple ADC mode.
+ (#) Configurable delay between conversions in Dual/Triple interleaved mode.
+ (#) ADC conversion type (refer to the datasheets).
+ (#) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at
+ slower speed.
+ (#) ADC input range: VREF(minus) = VIN = VREF(plus).
+ (#) DMA request generation during regular channel conversion.
+
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
+ (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
+ (##) ADC pins configuration
+ (+++) Enable the clock for the ADC GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE()
+ (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init()
+ (##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
+ (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
+ (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
+ (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
+ (+++) Configure and enable two DMA streams stream for managing data
+ transfer from peripheral to memory (output stream)
+ (+++) Associate the initialized DMA handle to the CRYP DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the two DMA Streams. The output stream should have higher
+ priority than the input stream.
+
+ *** Configuration of ADC, groups regular/injected, channels parameters ***
+ ==============================================================================
+ [..]
+ (#) Configure the ADC parameters (resolution, data alignment, ...)
+ and regular group parameters (conversion trigger, sequencer, ...)
+ using function HAL_ADC_Init().
+
+ (#) Configure the channels for regular group parameters (channel number,
+ channel rank into sequencer, ..., into regular group)
+ using function HAL_ADC_ConfigChannel().
+
+ (#) Optionally, configure the injected group parameters (conversion trigger,
+ sequencer, ..., of injected group)
+ and the channels for injected group parameters (channel number,
+ channel rank into sequencer, ..., into injected group)
+ using function HAL_ADCEx_InjectedConfigChannel().
+
+ (#) Optionally, configure the analog watchdog parameters (channels
+ monitored, thresholds, ...) using function HAL_ADC_AnalogWDGConfig().
+
+ (#) Optionally, for devices with several ADC instances: configure the
+ multimode parameters using function HAL_ADCEx_MultiModeConfigChannel().
+
+ *** Execution of ADC conversions ***
+ ==============================================================================
+ [..]
+ (#) ADC driver can be used among three modes: polling, interruption,
+ transfer by DMA.
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Start the ADC peripheral using HAL_ADC_Start()
+ (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
+ user can specify the value of timeout according to his end application
+ (+) To read the ADC converted values, use the HAL_ADC_GetValue() function.
+ (+) Stop the ADC peripheral using HAL_ADC_Stop()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Start the ADC peripheral using HAL_ADC_Start_IT()
+ (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
+ (+) At ADC end of conversion HAL_ADC_ConvCpltCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_ADC_ConvCpltCallback
+ (+) In case of ADC Error, HAL_ADC_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_ADC_ErrorCallback
+ (+) Stop the ADC peripheral using HAL_ADC_Stop_IT()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Start the ADC peripheral using HAL_ADC_Start_DMA(), at this stage the user specify the length
+ of data to be transferred at each end of conversion
+ (+) At The end of data transfer by HAL_ADC_ConvCpltCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_ADC_ConvCpltCallback
+ (+) In case of transfer Error, HAL_ADC_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_ADC_ErrorCallback
+ (+) Stop the ADC peripheral using HAL_ADC_Stop_DMA()
+
+ *** ADC HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in ADC HAL driver.
+
+ (+) __HAL_ADC_ENABLE : Enable the ADC peripheral
+ (+) __HAL_ADC_DISABLE : Disable the ADC peripheral
+ (+) __HAL_ADC_ENABLE_IT: Enable the ADC end of conversion interrupt
+ (+) __HAL_ADC_DISABLE_IT: Disable the ADC end of conversion interrupt
+ (+) __HAL_ADC_GET_IT_SOURCE: Check if the specified ADC interrupt source is enabled or disabled
+ (+) __HAL_ADC_CLEAR_FLAG: Clear the ADC's pending flags
+ (+) __HAL_ADC_GET_FLAG: Get the selected ADC's flag status
+ (+) ADC_GET_RESOLUTION: Return resolution bits in CR1 register
+
+ [..]
+ (@) You can refer to the ADC HAL driver header file for more useful macros
+
+ *** Deinitialization of ADC ***
+ ==============================================================================
+ [..]
+ (#) Disable the ADC interface
+ (++) ADC clock can be hard reset and disabled at RCC top level.
+ (++) Hard reset of ADC peripherals
+ using macro __HAL_RCC_ADC_FORCE_RESET(), __HAL_RCC_ADC_RELEASE_RESET().
+ (++) ADC clock disable using the equivalent macro/functions as configuration step.
+ (+++) Example:
+ Into HAL_ADC_MspDeInit() (recommended code location) or with
+ other device clock parameters configuration:
+ (+++) HAL_RCC_GetOscConfig(&RCC_OscInitStructure);
+ (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+ (+++) RCC_OscInitStructure.HSIState = RCC_HSI_OFF; (if not used for system clock)
+ (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure);
+
+ (#) ADC pins configuration
+ (++) Disable the clock for the ADC GPIOs using macro __HAL_RCC_GPIOx_CLK_DISABLE()
+
+ (#) Optionally, in case of usage of ADC with interruptions:
+ (++) Disable the NVIC for ADC using function HAL_NVIC_DisableIRQ(ADCx_IRQn)
+
+ (#) Optionally, in case of usage of DMA:
+ (++) Deinitialize the DMA using function HAL_DMA_DeInit().
+ (++) Disable the NVIC for DMA using function HAL_NVIC_DisableIRQ(DMAx_Channelx_IRQn)
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup ADC ADC
+ * @brief ADC driver modules
+ * @{
+ */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup ADC_Private_Functions
+ * @{
+ */
+/* Private function prototypes -----------------------------------------------*/
+static void ADC_Init(ADC_HandleTypeDef* hadc);
+static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma);
+static void ADC_DMAError(DMA_HandleTypeDef *hdma);
+static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup ADC_Exported_Functions ADC Exported Functions
+ * @{
+ */
+
+/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the ADC.
+ (+) De-initialize the ADC.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the ADCx peripheral according to the specified parameters
+ * in the ADC_InitStruct and initializes the ADC MSP.
+ *
+ * @note This function is used to configure the global features of the ADC (
+ * ClockPrescaler, Resolution, Data Alignment and number of conversion), however,
+ * the rest of the configuration parameters are specific to the regular
+ * channels group (scan mode activation, continuous mode activation,
+ * External trigger source and edge, DMA continuous request after the
+ * last transfer and End of conversion selection).
+ *
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+
+ /* Check ADC handle */
+ if(hadc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+ assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler));
+ assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ScanConvMode));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+ assert_param(IS_ADC_EXT_TRIG(hadc->Init.ExternalTrigConv));
+ assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign));
+ assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
+ assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode));
+
+ if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
+ {
+ assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+ }
+
+ if(hadc->State == HAL_ADC_STATE_RESET)
+ {
+ /* Initialize ADC error code */
+ ADC_CLEAR_ERRORCODE(hadc);
+
+ /* Allocate lock resource and initialize it */
+ hadc->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware */
+ HAL_ADC_MspInit(hadc);
+ }
+
+ /* Configuration of ADC parameters if previous preliminary actions are */
+ /* correctly completed. */
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL))
+ {
+ /* Set ADC state */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+ HAL_ADC_STATE_BUSY_INTERNAL);
+
+ /* Set ADC parameters */
+ ADC_Init(hadc);
+
+ /* Set ADC error code to none */
+ ADC_CLEAR_ERRORCODE(hadc);
+
+ /* Set the ADC state */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_BUSY_INTERNAL,
+ HAL_ADC_STATE_READY);
+ }
+ else
+ {
+ tmp_hal_status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmp_hal_status;
+}
+
+/**
+ * @brief Deinitializes the ADCx peripheral registers to their default reset values.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+
+ /* Check ADC handle */
+ if(hadc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Set ADC state */
+ SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL);
+
+ /* Stop potential conversion on going, on regular and injected groups */
+ /* Disable ADC peripheral */
+ __HAL_ADC_DISABLE(hadc);
+
+ /* Configuration of ADC parameters if previous preliminary actions are */
+ /* correctly completed. */
+ if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* DeInit the low level hardware */
+ HAL_ADC_MspDeInit(hadc);
+
+ /* Set ADC error code to none */
+ ADC_CLEAR_ERRORCODE(hadc);
+
+ /* Set ADC state */
+ hadc->State = HAL_ADC_STATE_RESET;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmp_hal_status;
+}
+
+/**
+ * @brief Initializes the ADC MSP.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval None
+ */
+__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hadc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ADC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the ADC MSP.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval None
+ */
+__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hadc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ADC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion of regular channel.
+ (+) Stop conversion of regular channel.
+ (+) Start conversion of regular channel and enable interrupt.
+ (+) Stop conversion of regular channel and disable interrupt.
+ (+) Start conversion of regular channel and enable DMA transfer.
+ (+) Stop conversion of regular channel and disable DMA transfer.
+ (+) Handle ADC interrupt request.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables ADC and starts conversion of the regular channels.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc)
+{
+ __IO uint32_t counter = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+ assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Enable the ADC peripheral */
+ /* Check if ADC peripheral is disabled in order to enable it and wait during
+ Tstab time the ADC's stabilization */
+ if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+ {
+ /* Enable the Peripheral */
+ __HAL_ADC_ENABLE(hadc);
+
+ /* Delay for ADC stabilization time */
+ /* Compute number of CPU cycles to wait for */
+ counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
+ while(counter != 0U)
+ {
+ counter--;
+ }
+ }
+
+ /* Start conversion if ADC is effectively enabled */
+ if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Set ADC state */
+ /* - Clear state bitfield related to regular group conversion results */
+ /* - Set state bitfield related to regular group operation */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
+ HAL_ADC_STATE_REG_BUSY);
+
+ /* If conversions on group regular are also triggering group injected, */
+ /* update ADC state. */
+ if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
+ {
+ ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);
+ }
+
+ /* State machine update: Check if an injected conversion is ongoing */
+ if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+ {
+ /* Reset ADC error code fields related to conversions on group regular */
+ CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));
+ }
+ else
+ {
+ /* Reset ADC all error code fields */
+ ADC_CLEAR_ERRORCODE(hadc);
+ }
+
+ /* Process unlocked */
+ /* Unlock before starting ADC conversions: in case of potential */
+ /* interruption, to let the process to ADC IRQ Handler. */
+ __HAL_UNLOCK(hadc);
+
+ /* Clear regular group conversion flag and overrun flag */
+ /* (To ensure of no unknown state from potential previous ADC operations) */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR);
+
+ /* Check if Multimode enabled */
+ if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+ {
+ /* if no external trigger present enable software conversion of regular channels */
+ if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+ {
+ /* Enable the selected ADC software conversion for regular group */
+ hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+ }
+ }
+ else
+ {
+ /* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */
+ if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
+ {
+ /* Enable the selected ADC software conversion for regular group */
+ hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+ }
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables ADC and stop conversion of regular channels.
+ *
+ * @note Caution: This function will stop also injected channels.
+ *
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ *
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Stop potential conversion on going, on regular and injected groups */
+ /* Disable ADC peripheral */
+ __HAL_ADC_DISABLE(hadc);
+
+ /* Check if ADC is effectively disabled */
+ if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Set ADC state */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+ HAL_ADC_STATE_READY);
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Poll for regular conversion complete
+ * @note ADC conversion flags EOS (end of sequence) and EOC (end of
+ * conversion) are cleared by this function.
+ * @note This function cannot be used in a particular setup: ADC configured
+ * in DMA mode and polling for end of each conversion (ADC init
+ * parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV).
+ * In this case, DMA resets the flag EOC and polling cannot be
+ * performed on each conversion. Nevertheless, polling can still
+ * be performed on the complete sequence.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param Timeout: Timeout value in millisecond.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Verification that ADC configuration is compliant with polling for */
+ /* each conversion: */
+ /* Particular case is ADC configured in DMA mode and ADC sequencer with */
+ /* several ranks and polling for end of each conversion. */
+ /* For code simplicity sake, this particular case is generalized to */
+ /* ADC configured in DMA mode and polling for end of each conversion. */
+ if (HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_EOCS) &&
+ HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_DMA) )
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ return HAL_ERROR;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check End of conversion flag */
+ while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC)))
+ {
+ /* Check if timeout is disabled (set to infinite wait) */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Update ADC state machine to timeout */
+ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear regular group conversion flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC);
+
+ /* Update ADC state machine */
+ SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
+
+ /* Determine whether any further conversion upcoming on group regular */
+ /* by external trigger, continuous mode or scan sequence on going. */
+ /* Note: On STM32F4, there is no independent flag of end of sequence. */
+ /* The test of scan sequence on going is done either with scan */
+ /* sequence disabled or with end of conversion flag set to */
+ /* of end of sequence. */
+ if(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
+ (hadc->Init.ContinuousConvMode == DISABLE) &&
+ (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ||
+ HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) )
+ {
+ /* Set ADC state */
+ CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
+
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+ {
+ SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+ }
+ }
+
+ /* Return ADC state */
+ return HAL_OK;
+}
+
+/**
+ * @brief Poll for conversion event
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param EventType: the ADC event type.
+ * This parameter can be one of the following values:
+ * @arg ADC_AWD_EVENT: ADC Analog watch Dog event.
+ * @arg ADC_OVR_EVENT: ADC Overrun event.
+ * @param Timeout: Timeout value in millisecond.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+ assert_param(IS_ADC_EVENT_TYPE(EventType));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check selected event flag */
+ while(!(__HAL_ADC_GET_FLAG(hadc,EventType)))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Update ADC state machine to timeout */
+ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Analog watchdog (level out of window) event */
+ if(EventType == ADC_AWD_EVENT)
+ {
+ /* Set ADC state */
+ SET_BIT(hadc->State, HAL_ADC_STATE_AWD1);
+
+ /* Clear ADC analog watchdog flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
+ }
+ /* Overrun event */
+ else
+ {
+ /* Set ADC state */
+ SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR);
+ /* Set ADC error code to overrun */
+ SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR);
+
+ /* Clear ADC overrun flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
+ }
+
+ /* Return ADC state */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Enables the interrupt and starts ADC conversion of regular channels.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc)
+{
+ __IO uint32_t counter = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+ assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Enable the ADC peripheral */
+ /* Check if ADC peripheral is disabled in order to enable it and wait during
+ Tstab time the ADC's stabilization */
+ if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+ {
+ /* Enable the Peripheral */
+ __HAL_ADC_ENABLE(hadc);
+
+ /* Delay for ADC stabilization time */
+ /* Compute number of CPU cycles to wait for */
+ counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
+ while(counter != 0U)
+ {
+ counter--;
+ }
+ }
+
+ /* Start conversion if ADC is effectively enabled */
+ if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Set ADC state */
+ /* - Clear state bitfield related to regular group conversion results */
+ /* - Set state bitfield related to regular group operation */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
+ HAL_ADC_STATE_REG_BUSY);
+
+ /* If conversions on group regular are also triggering group injected, */
+ /* update ADC state. */
+ if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
+ {
+ ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);
+ }
+
+ /* State machine update: Check if an injected conversion is ongoing */
+ if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+ {
+ /* Reset ADC error code fields related to conversions on group regular */
+ CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));
+ }
+ else
+ {
+ /* Reset ADC all error code fields */
+ ADC_CLEAR_ERRORCODE(hadc);
+ }
+
+ /* Process unlocked */
+ /* Unlock before starting ADC conversions: in case of potential */
+ /* interruption, to let the process to ADC IRQ Handler. */
+ __HAL_UNLOCK(hadc);
+
+ /* Clear regular group conversion flag and overrun flag */
+ /* (To ensure of no unknown state from potential previous ADC operations) */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR);
+
+ /* Enable end of conversion interrupt for regular group */
+ __HAL_ADC_ENABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_OVR));
+
+ /* Check if Multimode enabled */
+ if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+ {
+ /* if no external trigger present enable software conversion of regular channels */
+ if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+ {
+ /* Enable the selected ADC software conversion for regular group */
+ hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+ }
+ }
+ else
+ {
+ /* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */
+ if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
+ {
+ /* Enable the selected ADC software conversion for regular group */
+ hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+ }
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables the interrupt and stop ADC conversion of regular channels.
+ *
+ * @note Caution: This function will stop also injected channels.
+ *
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Stop potential conversion on going, on regular and injected groups */
+ /* Disable ADC peripheral */
+ __HAL_ADC_DISABLE(hadc);
+
+ /* Check if ADC is effectively disabled */
+ if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Disable ADC end of conversion interrupt for regular group */
+ __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_OVR));
+
+ /* Set ADC state */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+ HAL_ADC_STATE_READY);
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles ADC interrupt request
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval None
+ */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+ assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
+ assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
+
+ tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC);
+ tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOC);
+ /* Check End of conversion flag for regular channels */
+ if(tmp1 && tmp2)
+ {
+ /* Update state machine on conversion status if not in error state */
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL))
+ {
+ /* Set ADC state */
+ SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
+ }
+
+ /* Determine whether any further conversion upcoming on group regular */
+ /* by external trigger, continuous mode or scan sequence on going. */
+ /* Note: On STM32F4, there is no independent flag of end of sequence. */
+ /* The test of scan sequence on going is done either with scan */
+ /* sequence disabled or with end of conversion flag set to */
+ /* of end of sequence. */
+ if(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
+ (hadc->Init.ContinuousConvMode == DISABLE) &&
+ (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ||
+ HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) )
+ {
+ /* Disable ADC end of single conversion interrupt on group regular */
+ /* Note: Overrun interrupt was enabled with EOC interrupt in */
+ /* HAL_ADC_Start_IT(), but is not disabled here because can be used */
+ /* by overrun IRQ process below. */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+
+ /* Set ADC state */
+ CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
+
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+ {
+ SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+ }
+ }
+
+ /* Conversion complete callback */
+ HAL_ADC_ConvCpltCallback(hadc);
+
+ /* Clear regular group conversion flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC);
+ }
+
+ tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC);
+ tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_JEOC);
+ /* Check End of conversion flag for injected channels */
+ if(tmp1 && tmp2)
+ {
+ /* Update state machine on conversion status if not in error state */
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL))
+ {
+ /* Set ADC state */
+ SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC);
+ }
+
+ /* Determine whether any further conversion upcoming on group injected */
+ /* by external trigger, scan sequence on going or by automatic injected */
+ /* conversion from group regular (same conditions as group regular */
+ /* interruption disabling above). */
+ if(ADC_IS_SOFTWARE_START_INJECTED(hadc) &&
+ (HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL) ||
+ HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) &&
+ (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) &&
+ (ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
+ (hadc->Init.ContinuousConvMode == DISABLE) ) ) )
+ {
+ /* Disable ADC end of single conversion interrupt on group injected */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC);
+
+ /* Set ADC state */
+ CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
+
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
+ {
+ SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+ }
+ }
+
+ /* Conversion complete callback */
+ HAL_ADCEx_InjectedConvCpltCallback(hadc);
+
+ /* Clear injected group conversion flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JSTRT | ADC_FLAG_JEOC));
+ }
+
+ tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD);
+ tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD);
+ /* Check Analog watchdog flag */
+ if(tmp1 && tmp2)
+ {
+ if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD))
+ {
+ /* Set ADC state */
+ SET_BIT(hadc->State, HAL_ADC_STATE_AWD1);
+
+ /* Level out of window callback */
+ HAL_ADC_LevelOutOfWindowCallback(hadc);
+
+ /* Clear the ADC analog watchdog flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
+ }
+ }
+
+ tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_OVR);
+ tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_OVR);
+ /* Check Overrun flag */
+ if(tmp1 && tmp2)
+ {
+ /* Note: On STM32F4, ADC overrun can be set through other parameters */
+ /* refer to description of parameter "EOCSelection" for more */
+ /* details. */
+
+ /* Set ADC error code to overrun */
+ SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR);
+
+ /* Clear ADC overrun flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
+
+ /* Error callback */
+ HAL_ADC_ErrorCallback(hadc);
+
+ /* Clear the Overrun flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
+ }
+}
+
+/**
+ * @brief Enables ADC DMA request after last transfer (Single-ADC mode) and enables ADC peripheral
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param pData: The destination Buffer address.
+ * @param Length: The length of data to be transferred from ADC peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
+{
+ __IO uint32_t counter = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+ assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Enable the ADC peripheral */
+ /* Check if ADC peripheral is disabled in order to enable it and wait during
+ Tstab time the ADC's stabilization */
+ if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+ {
+ /* Enable the Peripheral */
+ __HAL_ADC_ENABLE(hadc);
+
+ /* Delay for ADC stabilization time */
+ /* Compute number of CPU cycles to wait for */
+ counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
+ while(counter != 0U)
+ {
+ counter--;
+ }
+ }
+
+ /* Start conversion if ADC is effectively enabled */
+ if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Set ADC state */
+ /* - Clear state bitfield related to regular group conversion results */
+ /* - Set state bitfield related to regular group operation */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
+ HAL_ADC_STATE_REG_BUSY);
+
+ /* If conversions on group regular are also triggering group injected, */
+ /* update ADC state. */
+ if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
+ {
+ ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);
+ }
+
+ /* State machine update: Check if an injected conversion is ongoing */
+ if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+ {
+ /* Reset ADC error code fields related to conversions on group regular */
+ CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));
+ }
+ else
+ {
+ /* Reset ADC all error code fields */
+ ADC_CLEAR_ERRORCODE(hadc);
+ }
+
+ /* Process unlocked */
+ /* Unlock before starting ADC conversions: in case of potential */
+ /* interruption, to let the process to ADC IRQ Handler. */
+ __HAL_UNLOCK(hadc);
+
+ /* Set the DMA transfer complete callback */
+ hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt;
+
+ /* Set the DMA half transfer complete callback */
+ hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt;
+
+ /* Set the DMA error callback */
+ hadc->DMA_Handle->XferErrorCallback = ADC_DMAError;
+
+
+ /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */
+ /* start (in case of SW start): */
+
+ /* Clear regular group conversion flag and overrun flag */
+ /* (To ensure of no unknown state from potential previous ADC operations) */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC | ADC_FLAG_OVR);
+
+ /* Enable ADC overrun interrupt */
+ __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
+
+ /* Enable ADC DMA mode */
+ hadc->Instance->CR2 |= ADC_CR2_DMA;
+
+ /* Start the DMA channel */
+ HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length);
+
+ /* Check if Multimode enabled */
+ if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+ {
+ /* if no external trigger present enable software conversion of regular channels */
+ if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+ {
+ /* Enable the selected ADC software conversion for regular group */
+ hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+ }
+ }
+ else
+ {
+ /* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */
+ if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
+ {
+ /* Enable the selected ADC software conversion for regular group */
+ hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+ }
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables ADC DMA (Single-ADC mode) and disables ADC peripheral
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Stop potential conversion on going, on regular and injected groups */
+ /* Disable ADC peripheral */
+ __HAL_ADC_DISABLE(hadc);
+
+ /* Check if ADC is effectively disabled */
+ if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Disable the selected ADC DMA mode */
+ hadc->Instance->CR2 &= ~ADC_CR2_DMA;
+
+ /* Disable the DMA channel (in case of DMA in circular mode or stop while */
+ /* DMA transfer is on going) */
+ tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle);
+
+ /* Disable ADC overrun interrupt */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
+
+ /* Set ADC state */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+ HAL_ADC_STATE_READY);
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmp_hal_status;
+}
+
+/**
+ * @brief Gets the converted value from data register of regular channel.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval Converted value
+ */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc)
+{
+ /* Return the selected ADC converted value */
+ return hadc->Instance->DR;
+}
+
+/**
+ * @brief Regular conversion complete callback in non blocking mode
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval None
+ */
+__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hadc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ADC_ConvCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Regular conversion half DMA transfer callback in non blocking mode
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval None
+ */
+__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hadc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ADC_ConvHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Analog watchdog callback in non blocking mode
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval None
+ */
+__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hadc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ADC_LevelOoutOfWindowCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error ADC callback.
+ * @note In case of error due to overrun when using ADC with DMA transfer
+ * (HAL ADC handle paramater "ErrorCode" to state "HAL_ADC_ERROR_OVR"):
+ * - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()".
+ * - If needed, restart a new ADC conversion using function
+ * "HAL_ADC_Start_DMA()"
+ * (this function is also clearing overrun flag)
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval None
+ */
+__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hadc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ADC_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure regular channels.
+ (+) Configure injected channels.
+ (+) Configure multimode.
+ (+) Configure the analog watch dog.
+
+@endverbatim
+ * @{
+ */
+
+ /**
+ * @brief Configures for the selected ADC regular channel its corresponding
+ * rank in the sequencer and its sample time.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param sConfig: ADC configuration structure.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig)
+{
+ __IO uint32_t counter = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_CHANNEL(sConfig->Channel));
+ assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank));
+ assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* if ADC_Channel_10 ... ADC_Channel_18 is selected */
+ if (sConfig->Channel > ADC_CHANNEL_9)
+ {
+ /* Clear the old sample time */
+ hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfig->Channel);
+
+ /* Set the new sample time */
+ hadc->Instance->SMPR1 |= ADC_SMPR1(sConfig->SamplingTime, sConfig->Channel);
+ }
+ else /* ADC_Channel include in ADC_Channel_[0..9] */
+ {
+ /* Clear the old sample time */
+ hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfig->Channel);
+
+ /* Set the new sample time */
+ hadc->Instance->SMPR2 |= ADC_SMPR2(sConfig->SamplingTime, sConfig->Channel);
+ }
+
+ /* For Rank 1 to 6 */
+ if (sConfig->Rank < 7U)
+ {
+ /* Clear the old SQx bits for the selected rank */
+ hadc->Instance->SQR3 &= ~ADC_SQR3_RK(ADC_SQR3_SQ1, sConfig->Rank);
+
+ /* Set the SQx bits for the selected rank */
+ hadc->Instance->SQR3 |= ADC_SQR3_RK(sConfig->Channel, sConfig->Rank);
+ }
+ /* For Rank 7 to 12 */
+ else if (sConfig->Rank < 13U)
+ {
+ /* Clear the old SQx bits for the selected rank */
+ hadc->Instance->SQR2 &= ~ADC_SQR2_RK(ADC_SQR2_SQ7, sConfig->Rank);
+
+ /* Set the SQx bits for the selected rank */
+ hadc->Instance->SQR2 |= ADC_SQR2_RK(sConfig->Channel, sConfig->Rank);
+ }
+ /* For Rank 13 to 16 */
+ else
+ {
+ /* Clear the old SQx bits for the selected rank */
+ hadc->Instance->SQR1 &= ~ADC_SQR1_RK(ADC_SQR1_SQ13, sConfig->Rank);
+
+ /* Set the SQx bits for the selected rank */
+ hadc->Instance->SQR1 |= ADC_SQR1_RK(sConfig->Channel, sConfig->Rank);
+ }
+
+ /* if ADC1 Channel_18 is selected enable VBAT Channel */
+ if ((hadc->Instance == ADC1) && (sConfig->Channel == ADC_CHANNEL_VBAT))
+ {
+ /* Enable the VBAT channel*/
+ ADC->CCR |= ADC_CCR_VBATE;
+ }
+
+ /* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
+ if ((hadc->Instance == ADC1) && ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || (sConfig->Channel == ADC_CHANNEL_VREFINT)))
+ {
+ /* Enable the TSVREFE channel*/
+ ADC->CCR |= ADC_CCR_TSVREFE;
+
+ if((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR))
+ {
+ /* Delay for temperature sensor stabilization time */
+ /* Compute number of CPU cycles to wait for */
+ counter = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000U));
+ while(counter != 0U)
+ {
+ counter--;
+ }
+ }
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the analog watchdog.
+ * @note Analog watchdog thresholds can be modified while ADC conversion
+ * is on going.
+ * In this case, some constraints must be taken into account:
+ * The programmed threshold values are effective from the next
+ * ADC EOC (end of unitary conversion).
+ * Considering that registers write delay may happen due to
+ * bus activity, this might cause an uncertainty on the
+ * effective timing of the new programmed threshold values.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param AnalogWDGConfig : pointer to an ADC_AnalogWDGConfTypeDef structure
+ * that contains the configuration information of ADC analog watchdog.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig)
+{
+#ifdef USE_FULL_ASSERT
+ uint32_t tmp = 0U;
+#endif /* USE_FULL_ASSERT */
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ANALOG_WATCHDOG(AnalogWDGConfig->WatchdogMode));
+ assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel));
+ assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode));
+
+#ifdef USE_FULL_ASSERT
+ tmp = ADC_GET_RESOLUTION(hadc);
+ assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->HighThreshold));
+ assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->LowThreshold));
+#endif /* USE_FULL_ASSERT */
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ if(AnalogWDGConfig->ITMode == ENABLE)
+ {
+ /* Enable the ADC Analog watchdog interrupt */
+ __HAL_ADC_ENABLE_IT(hadc, ADC_IT_AWD);
+ }
+ else
+ {
+ /* Disable the ADC Analog watchdog interrupt */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_AWD);
+ }
+
+ /* Clear AWDEN, JAWDEN and AWDSGL bits */
+ hadc->Instance->CR1 &= ~(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN | ADC_CR1_AWDEN);
+
+ /* Set the analog watchdog enable mode */
+ hadc->Instance->CR1 |= AnalogWDGConfig->WatchdogMode;
+
+ /* Set the high threshold */
+ hadc->Instance->HTR = AnalogWDGConfig->HighThreshold;
+
+ /* Set the low threshold */
+ hadc->Instance->LTR = AnalogWDGConfig->LowThreshold;
+
+ /* Clear the Analog watchdog channel select bits */
+ hadc->Instance->CR1 &= ~ADC_CR1_AWDCH;
+
+ /* Set the Analog watchdog channel */
+ hadc->Instance->CR1 |= (uint32_t)((uint16_t)(AnalogWDGConfig->Channel));
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Functions_Group4 ADC Peripheral State functions
+ * @brief ADC Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the ADC state
+ (+) Check the ADC Error
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the ADC state
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval HAL state
+ */
+uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc)
+{
+ /* Return ADC state */
+ return hadc->State;
+}
+
+/**
+ * @brief Return the ADC error code
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval ADC Error Code
+ */
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc)
+{
+ return hadc->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup ADC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the ADCx peripheral according to the specified parameters
+ * in the ADC_InitStruct without initializing the ADC MSP.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval None
+ */
+static void ADC_Init(ADC_HandleTypeDef* hadc)
+{
+ /* Set ADC parameters */
+ /* Set the ADC clock prescaler */
+ ADC->CCR &= ~(ADC_CCR_ADCPRE);
+ ADC->CCR |= hadc->Init.ClockPrescaler;
+
+ /* Set ADC scan mode */
+ hadc->Instance->CR1 &= ~(ADC_CR1_SCAN);
+ hadc->Instance->CR1 |= ADC_CR1_SCANCONV(hadc->Init.ScanConvMode);
+
+ /* Set ADC resolution */
+ hadc->Instance->CR1 &= ~(ADC_CR1_RES);
+ hadc->Instance->CR1 |= hadc->Init.Resolution;
+
+ /* Set ADC data alignment */
+ hadc->Instance->CR2 &= ~(ADC_CR2_ALIGN);
+ hadc->Instance->CR2 |= hadc->Init.DataAlign;
+
+ /* Enable external trigger if trigger selection is different of software */
+ /* start. */
+ /* Note: This configuration keeps the hardware feature of parameter */
+ /* ExternalTrigConvEdge "trigger edge none" equivalent to */
+ /* software start. */
+ if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
+ {
+ /* Select external trigger to start conversion */
+ hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
+ hadc->Instance->CR2 |= hadc->Init.ExternalTrigConv;
+
+ /* Select external trigger polarity */
+ hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
+ hadc->Instance->CR2 |= hadc->Init.ExternalTrigConvEdge;
+ }
+ else
+ {
+ /* Reset the external trigger */
+ hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
+ hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
+ }
+
+ /* Enable or disable ADC continuous conversion mode */
+ hadc->Instance->CR2 &= ~(ADC_CR2_CONT);
+ hadc->Instance->CR2 |= ADC_CR2_CONTINUOUS(hadc->Init.ContinuousConvMode);
+
+ if(hadc->Init.DiscontinuousConvMode != DISABLE)
+ {
+ assert_param(IS_ADC_REGULAR_DISC_NUMBER(hadc->Init.NbrOfDiscConversion));
+
+ /* Enable the selected ADC regular discontinuous mode */
+ hadc->Instance->CR1 |= (uint32_t)ADC_CR1_DISCEN;
+
+ /* Set the number of channels to be converted in discontinuous mode */
+ hadc->Instance->CR1 &= ~(ADC_CR1_DISCNUM);
+ hadc->Instance->CR1 |= ADC_CR1_DISCONTINUOUS(hadc->Init.NbrOfDiscConversion);
+ }
+ else
+ {
+ /* Disable the selected ADC regular discontinuous mode */
+ hadc->Instance->CR1 &= ~(ADC_CR1_DISCEN);
+ }
+
+ /* Set ADC number of conversion */
+ hadc->Instance->SQR1 &= ~(ADC_SQR1_L);
+ hadc->Instance->SQR1 |= ADC_SQR1(hadc->Init.NbrOfConversion);
+
+ /* Enable or disable ADC DMA continuous request */
+ hadc->Instance->CR2 &= ~(ADC_CR2_DDS);
+ hadc->Instance->CR2 |= ADC_CR2_DMAContReq(hadc->Init.DMAContinuousRequests);
+
+ /* Enable or disable ADC end of conversion selection */
+ hadc->Instance->CR2 &= ~(ADC_CR2_EOCS);
+ hadc->Instance->CR2 |= ADC_CR2_EOCSelection(hadc->Init.EOCSelection);
+}
+
+/**
+ * @brief DMA transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Retrieve ADC handle corresponding to current DMA handle */
+ ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Update state machine on conversion status if not in error state */
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA))
+ {
+ /* Update ADC state machine */
+ SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
+
+ /* Determine whether any further conversion upcoming on group regular */
+ /* by external trigger, continuous mode or scan sequence on going. */
+ /* Note: On STM32F4, there is no independent flag of end of sequence. */
+ /* The test of scan sequence on going is done either with scan */
+ /* sequence disabled or with end of conversion flag set to */
+ /* of end of sequence. */
+ if(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
+ (hadc->Init.ContinuousConvMode == DISABLE) &&
+ (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ||
+ HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) )
+ {
+ /* Disable ADC end of single conversion interrupt on group regular */
+ /* Note: Overrun interrupt was enabled with EOC interrupt in */
+ /* HAL_ADC_Start_IT(), but is not disabled here because can be used */
+ /* by overrun IRQ process below. */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+
+ /* Set ADC state */
+ CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
+
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+ {
+ SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+ }
+ }
+
+ /* Conversion complete callback */
+ HAL_ADC_ConvCpltCallback(hadc);
+ }
+ else
+ {
+ /* Call DMA error callback */
+ hadc->DMA_Handle->XferErrorCallback(hdma);
+ }
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma)
+{
+ ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* Conversion complete callback */
+ HAL_ADC_ConvHalfCpltCallback(hadc);
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void ADC_DMAError(DMA_HandleTypeDef *hdma)
+{
+ ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hadc->State= HAL_ADC_STATE_ERROR_DMA;
+ /* Set ADC error code to DMA error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
+ HAL_ADC_ErrorCallback(hadc);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,860 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file containing functions prototypes of ADC HAL library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_H
+#define __STM32F4xx_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Types ADC Exported Types
+ * @{
+ */
+
+/**
+ * @brief Structure definition of ADC and regular group initialization
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope entire ADC (affects regular and injected groups): ClockPrescaler, Resolution, ScanConvMode, DataAlign, ScanConvMode, EOCSelection, LowPowerAutoWait, LowPowerAutoPowerOff, ChannelsBank.
+ * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv.
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled
+ * - For all parameters except 'Resolution', 'ScanConvMode', 'DiscontinuousConvMode', 'NbrOfDiscConversion' : ADC enabled without conversion on going on regular group.
+ * - For parameters 'ExternalTrigConv' and 'ExternalTrigConvEdge': ADC enabled, even with conversion on going.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /*!< Select ADC clock prescaler. The clock is common for
+ all the ADCs.
+ This parameter can be a value of @ref ADC_ClockPrescaler */
+ uint32_t Resolution; /*!< Configures the ADC resolution.
+ This parameter can be a value of @ref ADC_Resolution */
+ uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
+ or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
+ This parameter can be a value of @ref ADC_Data_align */
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+ Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+ If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+ Scan direction is upward: from rank1 to rank 'n'.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
+ This parameter can be a value of @ref ADC_EOCSelection.
+ Note: For injected group, end of conversion (flag&IT) is raised only at the end of the sequence.
+ Therefore, if end of conversion is set to end of each conversion, injected group should not be used with interruption (HAL_ADCEx_InjectedStart_IT)
+ or polling (HAL_ADCEx_InjectedStart and HAL_ADCEx_InjectedPollForConversion). By the way, polling is still possible since driver will use an estimated timing for end of injected conversion.
+ Note: If overrun feature is intended to be used, use ADC in mode 'interruption' (function HAL_ADC_Start_IT() ) with parameter EOCSelection set to end of each conversion or in mode 'transfer by DMA' (function HAL_ADC_Start_DMA()).
+ If overrun feature is intended to be bypassed, use ADC in mode 'polling' or 'interruption' with parameter EOCSelection must be set to end of sequence */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+ To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+ If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ If set to external trigger source, triggering is on event rising edge by default.
+ This parameter can be a value of @ref ADC_External_trigger_Source_Regular */
+ uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
+ If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+ This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
+ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
+ or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
+ Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
+ Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion).
+ This parameter can be set to ENABLE or DISABLE. */
+}ADC_InitTypeDef;
+
+
+
+/**
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC can be either disabled or enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t Rank; /*!< Specifies the rank in the regular group sequencer.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+ uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
+ This parameter can be a value of @ref ADC_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
+ uint32_t Offset; /*!< Reserved for future use, can be set to 0 */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief ADC Configuration multi-mode structure definition
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode.
+ This parameter can be a value of @ref ADC_analog_watchdog_selection */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a 12-bit value. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a 12-bit value. */
+ uint32_t Channel; /*!< Configures ADC channel for the analog watchdog.
+ This parameter has an effect only if watchdog mode is configured on single channel
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured
+ is interrupt mode or in polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+
+/**
+ * @brief HAL ADC state machine: ADC states definition (bitfields)
+ */
+/* States of ADC global scope */
+#define HAL_ADC_STATE_RESET ((uint32_t)0x00000000U) /*!< ADC not yet initialized or disabled */
+#define HAL_ADC_STATE_READY ((uint32_t)0x00000001U) /*!< ADC peripheral ready for use */
+#define HAL_ADC_STATE_BUSY_INTERNAL ((uint32_t)0x00000002U) /*!< ADC is busy to internal process (initialization, calibration) */
+#define HAL_ADC_STATE_TIMEOUT ((uint32_t)0x00000004U) /*!< TimeOut occurrence */
+
+/* States of ADC errors */
+#define HAL_ADC_STATE_ERROR_INTERNAL ((uint32_t)0x00000010U) /*!< Internal error occurrence */
+#define HAL_ADC_STATE_ERROR_CONFIG ((uint32_t)0x00000020U) /*!< Configuration error occurrence */
+#define HAL_ADC_STATE_ERROR_DMA ((uint32_t)0x00000040U) /*!< DMA error occurrence */
+
+/* States of ADC group regular */
+#define HAL_ADC_STATE_REG_BUSY ((uint32_t)0x00000100U) /*!< A conversion on group regular is ongoing or can occur (either by continuous mode,
+ external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
+#define HAL_ADC_STATE_REG_EOC ((uint32_t)0x00000200U) /*!< Conversion data available on group regular */
+#define HAL_ADC_STATE_REG_OVR ((uint32_t)0x00000400U) /*!< Overrun occurrence */
+
+/* States of ADC group injected */
+#define HAL_ADC_STATE_INJ_BUSY ((uint32_t)0x00001000U) /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode,
+ external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
+#define HAL_ADC_STATE_INJ_EOC ((uint32_t)0x00002000U) /*!< Conversion data available on group injected */
+
+/* States of ADC analog watchdogs */
+#define HAL_ADC_STATE_AWD1 ((uint32_t)0x00010000U) /*!< Out-of-window occurrence of analog watchdog 1 */
+#define HAL_ADC_STATE_AWD2 ((uint32_t)0x00020000U) /*!< Not available on STM32F4 device: Out-of-window occurrence of analog watchdog 2 */
+#define HAL_ADC_STATE_AWD3 ((uint32_t)0x00040000U) /*!< Not available on STM32F4 device: Out-of-window occurrence of analog watchdog 3 */
+
+/* States of ADC multi-mode */
+#define HAL_ADC_STATE_MULTIMODE_SLAVE ((uint32_t)0x00100000U) /*!< Not available on STM32F4 device: ADC in multimode slave state, controlled by another ADC master ( */
+
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ __IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO uint32_t State; /*!< ADC communication state */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+}ADC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+/** @defgroup ADC_Error_Code ADC Error Code
+ * @{
+ */
+#define HAL_ADC_ERROR_NONE ((uint32_t)0x00U) /*!< No error */
+#define HAL_ADC_ERROR_INTERNAL ((uint32_t)0x01U) /*!< ADC IP internal error: if problem of clocking,
+ enable/disable, erroneous state */
+#define HAL_ADC_ERROR_OVR ((uint32_t)0x02U) /*!< Overrun error */
+#define HAL_ADC_ERROR_DMA ((uint32_t)0x04U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_ClockPrescaler ADC Clock Prescaler
+ * @{
+ */
+#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)0x00000000U)
+#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0)
+#define ADC_CLOCK_SYNC_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1)
+#define ADC_CLOCK_SYNC_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases
+ * @{
+ */
+#define ADC_TWOSAMPLINGDELAY_5CYCLES ((uint32_t)0x00000000U)
+#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0)
+#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1)
+#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2)
+#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3)
+#define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2))
+#define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Resolution ADC Resolution
+ * @{
+ */
+#define ADC_RESOLUTION_12B ((uint32_t)0x00000000U)
+#define ADC_RESOLUTION_10B ((uint32_t)ADC_CR1_RES_0)
+#define ADC_RESOLUTION_8B ((uint32_t)ADC_CR1_RES_1)
+#define ADC_RESOLUTION_6B ((uint32_t)ADC_CR1_RES)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000U)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular
+ * @{
+ */
+/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for */
+/* compatibility with other STM32 devices. */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ((uint32_t)0x00000000U)
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0)
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1)
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_CC3 ((uint32_t)ADC_CR2_EXTSEL_2)
+#define ADC_EXTERNALTRIGCONV_T2_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T3_CC1 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_3)
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T5_CC2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2))
+#define ADC_EXTERNALTRIGCONV_T8_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_Ext_IT11 ((uint32_t)ADC_CR2_EXTSEL)
+#define ADC_SOFTWARE_START ((uint32_t)ADC_CR2_EXTSEL + 1U)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Data_align ADC Data Align
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000U)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels ADC Common Channels
+ * @{
+ */
+#define ADC_CHANNEL_0 ((uint32_t)0x00000000U)
+#define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1)
+#define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2)
+#define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3)
+#define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2))
+#define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4)
+#define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1))
+
+#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17)
+#define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_times ADC Sampling Times
+ * @{
+ */
+#define ADC_SAMPLETIME_3CYCLES ((uint32_t)0x00000000U)
+#define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0)
+#define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1)
+#define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2)
+#define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1))
+#define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10)
+/**
+ * @}
+ */
+
+ /** @defgroup ADC_EOCSelection ADC EOC Selection
+ * @{
+ */
+#define ADC_EOC_SEQ_CONV ((uint32_t)0x00000000U)
+#define ADC_EOC_SINGLE_CONV ((uint32_t)0x00000001U)
+#define ADC_EOC_SINGLE_SEQ_CONV ((uint32_t)0x00000002U) /*!< reserved for future use */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Event_type ADC Event Type
+ * @{
+ */
+#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD)
+#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition ADC Interrupts Definition
+ * @{
+ */
+#define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE)
+#define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE)
+#define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE)
+#define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition ADC Flags Definition
+ * @{
+ */
+#define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD)
+#define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC)
+#define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC)
+#define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT)
+#define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT)
+#define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels_type ADC Channels Type
+ * @{
+ */
+#define ADC_ALL_CHANNELS ((uint32_t)0x00000001U)
+#define ADC_REGULAR_CHANNELS ((uint32_t)0x00000002U) /*!< reserved for future use */
+#define ADC_INJECTED_CHANNELS ((uint32_t)0x00000003U) /*!< reserved for future use */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+ * @{
+ */
+
+/** @brief Reset ADC handle state
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/**
+ * @brief Enable the ADC peripheral.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON)
+
+/**
+ * @brief Disable the ADC peripheral.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON)
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: ADC Interrupt.
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: ADC interrupt.
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
+
+/** @brief Check if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: specifies the ADC interrupt source to check.
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clear the ADC's pending flags.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __FLAG__: ADC flag.
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __FLAG__: ADC flag.
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Include ADC HAL Extension module */
+#include "stm32f4xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+ * @}
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions ***************************************************/
+uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADC_Private_Constants ADC Private Constants
+ * @{
+ */
+/* Delay for ADC stabilization time. */
+/* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */
+/* Unit: us */
+#define ADC_STAB_DELAY_US ((uint32_t) 3U)
+/* Delay for temperature sensor stabilization time. */
+/* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */
+/* Unit: us */
+#define ADC_TEMPSENSOR_DELAY_US ((uint32_t) 10U)
+/**
+ * @}
+ */
+
+/* Private macro ------------------------------------------------------------*/
+
+/** @defgroup ADC_Private_Macros ADC Private Macros
+ * @{
+ */
+/* Macro reserved for internal HAL driver usage, not intended to be used in
+ code of final user */
+
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+#define ADC_IS_ENABLE(__HANDLE__) \
+ ((( ((__HANDLE__)->Instance->SR & ADC_SR_ADONS) == ADC_SR_ADONS ) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (((__HANDLE__)->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+
+/**
+ * @brief Test if conversion trigger of injected group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \
+ (((__HANDLE__)->Instance->CR2 & ADC_CR2_JEXTEN) == RESET)
+
+/**
+ * @brief Simultaneously clears and sets specific bits of the handle State
+ * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(),
+ * the first parameter is the ADC handle State, the second parameter is the
+ * bit field to clear, the third and last parameter is the bit field to set.
+ * @retval None
+ */
+#define ADC_STATE_CLR_SET MODIFY_REG
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define ADC_CLEAR_ERRORCODE(__HANDLE__) \
+ ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+
+
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV6) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV8))
+#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES))
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \
+ ((RESOLUTION) == ADC_RESOLUTION_10B) || \
+ ((RESOLUTION) == ADC_RESOLUTION_8B) || \
+ ((RESOLUTION) == ADC_RESOLUTION_6B))
+#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING))
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11)|| \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT))
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_15CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_56CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_84CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_112CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_144CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_480CYCLES))
+#define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == ADC_EOC_SINGLE_CONV) || \
+ ((EOCSelection) == ADC_EOC_SEQ_CONV) || \
+ ((EOCSelection) == ADC_EOC_SINGLE_SEQ_CONV))
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \
+ ((EVENT) == ADC_OVR_EVENT))
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE))
+#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \
+ ((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \
+ ((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS))
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= ((uint32_t)0xFFFU))
+
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1U)) && ((LENGTH) <= ((uint32_t)16U)))
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1U)) && ((RANK) <= ((uint32_t)16U)))
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1U)) && ((NUMBER) <= ((uint32_t)8U)))
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
+ ((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= ((uint32_t)0x0FFFU))) || \
+ (((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= ((uint32_t)0x03FFU))) || \
+ (((RESOLUTION) == ADC_RESOLUTION_8B) && ((ADC_VALUE) <= ((uint32_t)0x00FFU))) || \
+ (((RESOLUTION) == ADC_RESOLUTION_6B) && ((ADC_VALUE) <= ((uint32_t)0x003FU))))
+
+/**
+ * @brief Set ADC Regular channel sequence length.
+ * @param _NbrOfConversion_: Regular channel sequence length.
+ * @retval None
+ */
+#define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1U) << 20U)
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 10 and 18.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3U * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10U)))
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 0 and 9.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3U * ((uint32_t)((uint16_t)(_CHANNELNB_)))))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 1 and 6.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 1U)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 7 and 12.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 7U)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 13 and 16.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 13U)))
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1U)
+
+/**
+ * @brief Configures the number of discontinuous conversions for the regular group channels.
+ * @param _NBR_DISCONTINUOUSCONV_: Number of discontinuous conversions.
+ * @retval None
+ */
+#define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1U) << POSITION_VAL(ADC_CR1_DISCNUM))
+
+/**
+ * @brief Enable ADC scan mode.
+ * @param _SCANCONV_MODE_: Scan conversion mode.
+ * @retval None
+ */
+#define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8U)
+
+/**
+ * @brief Enable the ADC end of conversion selection.
+ * @param _EOCSelection_MODE_: End of conversion selection mode.
+ * @retval None
+ */
+#define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10U)
+
+/**
+ * @brief Enable the ADC DMA continuous request.
+ * @param _DMAContReq_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9U)
+
+/**
+ * @brief Return resolution bits in CR1 register.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup ADC_Private_Functions ADC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1069 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the ADC extension peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
+ (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
+ (##) ADC pins configuration
+ (+++) Enable the clock for the ADC GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE()
+ (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init()
+ (##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
+ (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
+ (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
+ (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
+ (+++) Configure and enable two DMA streams stream for managing data
+ transfer from peripheral to memory (output stream)
+ (+++) Associate the initialized DMA handle to the ADC DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the two DMA Streams. The output stream should have higher
+ priority than the input stream.
+ (#) Configure the ADC Prescaler, conversion resolution and data alignment
+ using the HAL_ADC_Init() function.
+
+ (#) Configure the ADC Injected channels group features, use HAL_ADC_Init()
+ and HAL_ADC_ConfigChannel() functions.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart()
+ (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
+ user can specify the value of timeout according to his end application
+ (+) To read the ADC converted values, use the HAL_ADCEx_InjectedGetValue() function.
+ (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_IT()
+ (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
+ (+) At ADC end of conversion HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
+ (+) In case of ADC Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
+ (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_IT()
+
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_DMA(), at this stage the user specify the length
+ of data to be transferred at each end of conversion
+ (+) At The end of data transfer ba HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
+ (+) In case of transfer Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
+ (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_DMA()
+
+ *** Multi mode ADCs Regular channels configuration ***
+ ======================================================
+ [..]
+ (+) Select the Multi mode ADC regular channels features (dual or triple mode)
+ and configure the DMA mode using HAL_ADCEx_MultiModeConfigChannel() functions.
+ (+) Start the ADC peripheral using HAL_ADCEx_MultiModeStart_DMA(), at this stage the user specify the length
+ of data to be transferred at each end of conversion
+ (+) Read the ADCs converted values using the HAL_ADCEx_MultiModeGetValue() function.
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup ADCEx ADCEx
+ * @brief ADC Extended driver modules
+ * @{
+ */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup ADCEx_Private_Functions
+ * @{
+ */
+/* Private function prototypes -----------------------------------------------*/
+static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma);
+static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma);
+static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Functions ADC Exported Functions
+ * @{
+ */
+
+/** @defgroup ADCEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion of injected channel.
+ (+) Stop conversion of injected channel.
+ (+) Start multimode and enable DMA transfer.
+ (+) Stop multimode and disable DMA transfer.
+ (+) Get result of injected channel conversion.
+ (+) Get result of multimode conversion.
+ (+) Configure injected channels.
+ (+) Configure multimode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the selected ADC software start conversion of the injected channels.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc)
+{
+ __IO uint32_t counter = 0U;
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Enable the ADC peripheral */
+
+ /* Check if ADC peripheral is disabled in order to enable it and wait during
+ Tstab time the ADC's stabilization */
+ if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+ {
+ /* Enable the Peripheral */
+ __HAL_ADC_ENABLE(hadc);
+
+ /* Delay for ADC stabilization time */
+ /* Compute number of CPU cycles to wait for */
+ counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
+ while(counter != 0U)
+ {
+ counter--;
+ }
+ }
+
+ /* Start conversion if ADC is effectively enabled */
+ if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Set ADC state */
+ /* - Clear state bitfield related to injected group conversion results */
+ /* - Set state bitfield related to injected operation */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC,
+ HAL_ADC_STATE_INJ_BUSY);
+
+ /* Check if a regular conversion is ongoing */
+ /* Note: On this device, there is no ADC error code fields related to */
+ /* conversions on group injected only. In case of conversion on */
+ /* going on group regular, no error code is reset. */
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
+ {
+ /* Reset ADC all error code fields */
+ ADC_CLEAR_ERRORCODE(hadc);
+ }
+
+ /* Process unlocked */
+ /* Unlock before starting ADC conversions: in case of potential */
+ /* interruption, to let the process to ADC IRQ Handler. */
+ __HAL_UNLOCK(hadc);
+
+ /* Clear injected group conversion flag */
+ /* (To ensure of no unknown state from potential previous ADC operations) */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
+
+ /* Check if Multimode enabled */
+ if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+ {
+ tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+ tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+ if(tmp1 && tmp2)
+ {
+ /* Enable the selected ADC software conversion for injected group */
+ hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+ }
+ }
+ else
+ {
+ tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+ tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+ if((hadc->Instance == ADC1) && tmp1 && tmp2)
+ {
+ /* Enable the selected ADC software conversion for injected group */
+ hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+ }
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the interrupt and starts ADC conversion of injected channels.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ *
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc)
+{
+ __IO uint32_t counter = 0U;
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Enable the ADC peripheral */
+
+ /* Check if ADC peripheral is disabled in order to enable it and wait during
+ Tstab time the ADC's stabilization */
+ if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+ {
+ /* Enable the Peripheral */
+ __HAL_ADC_ENABLE(hadc);
+
+ /* Delay for ADC stabilization time */
+ /* Compute number of CPU cycles to wait for */
+ counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
+ while(counter != 0U)
+ {
+ counter--;
+ }
+ }
+
+ /* Start conversion if ADC is effectively enabled */
+ if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Set ADC state */
+ /* - Clear state bitfield related to injected group conversion results */
+ /* - Set state bitfield related to injected operation */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC,
+ HAL_ADC_STATE_INJ_BUSY);
+
+ /* Check if a regular conversion is ongoing */
+ /* Note: On this device, there is no ADC error code fields related to */
+ /* conversions on group injected only. In case of conversion on */
+ /* going on group regular, no error code is reset. */
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
+ {
+ /* Reset ADC all error code fields */
+ ADC_CLEAR_ERRORCODE(hadc);
+ }
+
+ /* Process unlocked */
+ /* Unlock before starting ADC conversions: in case of potential */
+ /* interruption, to let the process to ADC IRQ Handler. */
+ __HAL_UNLOCK(hadc);
+
+ /* Clear injected group conversion flag */
+ /* (To ensure of no unknown state from potential previous ADC operations) */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
+
+ /* Enable end of conversion interrupt for injected channels */
+ __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC);
+
+ /* Check if Multimode enabled */
+ if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+ {
+ tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+ tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+ if(tmp1 && tmp2)
+ {
+ /* Enable the selected ADC software conversion for injected group */
+ hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+ }
+ }
+ else
+ {
+ tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+ tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+ if((hadc->Instance == ADC1) && tmp1 && tmp2)
+ {
+ /* Enable the selected ADC software conversion for injected group */
+ hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+ }
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop conversion of injected channels. Disable ADC peripheral if
+ * no regular conversion is on going.
+ * @note If ADC must be disabled and if conversion is on going on
+ * regular group, function HAL_ADC_Stop must be used to stop both
+ * injected and regular groups, and disable the ADC.
+ * @note If injected group mode auto-injection is enabled,
+ * function HAL_ADC_Stop must be used.
+ * @note In case of auto-injection mode, HAL_ADC_Stop must be used.
+ * @param hadc: ADC handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Stop potential conversion and disable ADC peripheral */
+ /* Conditioned to: */
+ /* - No conversion on the other group (regular group) is intended to */
+ /* continue (injected and regular groups stop conversion and ADC disable */
+ /* are common) */
+ /* - In case of auto-injection mode, HAL_ADC_Stop must be used. */
+ if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) &&
+ HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) )
+ {
+ /* Stop potential conversion on going, on regular and injected groups */
+ /* Disable ADC peripheral */
+ __HAL_ADC_DISABLE(hadc);
+
+ /* Check if ADC is effectively disabled */
+ if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Set ADC state */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+ HAL_ADC_STATE_READY);
+ }
+ }
+ else
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
+
+ tmp_hal_status = HAL_ERROR;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmp_hal_status;
+}
+
+/**
+ * @brief Poll for injected conversion complete
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param Timeout: Timeout value in millisecond.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check End of conversion flag */
+ while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hadc->State= HAL_ADC_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear injected group conversion flag */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JSTRT | ADC_FLAG_JEOC);
+
+ /* Update ADC state machine */
+ SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC);
+
+ /* Determine whether any further conversion upcoming on group injected */
+ /* by external trigger, continuous mode or scan sequence on going. */
+ /* Note: On STM32F4, there is no independent flag of end of sequence. */
+ /* The test of scan sequence on going is done either with scan */
+ /* sequence disabled or with end of conversion flag set to */
+ /* of end of sequence. */
+ if(ADC_IS_SOFTWARE_START_INJECTED(hadc) &&
+ (HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL) ||
+ HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) &&
+ (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) &&
+ (ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
+ (hadc->Init.ContinuousConvMode == DISABLE) ) ) )
+ {
+ /* Set ADC state */
+ CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
+
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
+ {
+ SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+ }
+ }
+
+ /* Return ADC state */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop conversion of injected channels, disable interruption of
+ * end-of-conversion. Disable ADC peripheral if no regular conversion
+ * is on going.
+ * @note If ADC must be disabled and if conversion is on going on
+ * regular group, function HAL_ADC_Stop must be used to stop both
+ * injected and regular groups, and disable the ADC.
+ * @note If injected group mode auto-injection is enabled,
+ * function HAL_ADC_Stop must be used.
+ * @param hadc: ADC handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Stop potential conversion and disable ADC peripheral */
+ /* Conditioned to: */
+ /* - No conversion on the other group (regular group) is intended to */
+ /* continue (injected and regular groups stop conversion and ADC disable */
+ /* are common) */
+ /* - In case of auto-injection mode, HAL_ADC_Stop must be used. */
+ if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET) &&
+ HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) )
+ {
+ /* Stop potential conversion on going, on regular and injected groups */
+ /* Disable ADC peripheral */
+ __HAL_ADC_DISABLE(hadc);
+
+ /* Check if ADC is effectively disabled */
+ if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Disable ADC end of conversion interrupt for injected channels */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC);
+
+ /* Set ADC state */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+ HAL_ADC_STATE_READY);
+ }
+ }
+ else
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
+
+ tmp_hal_status = HAL_ERROR;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmp_hal_status;
+}
+
+/**
+ * @brief Gets the converted value from data register of injected channel.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param InjectedRank: the ADC injected rank.
+ * This parameter can be one of the following values:
+ * @arg ADC_INJECTED_RANK_1: Injected Channel1 selected
+ * @arg ADC_INJECTED_RANK_2: Injected Channel2 selected
+ * @arg ADC_INJECTED_RANK_3: Injected Channel3 selected
+ * @arg ADC_INJECTED_RANK_4: Injected Channel4 selected
+ * @retval None
+ */
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank)
+{
+ __IO uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_INJECTED_RANK(InjectedRank));
+
+ /* Clear injected group conversion flag to have similar behaviour as */
+ /* regular group: reading data register also clears end of conversion flag. */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
+
+ /* Return the selected ADC converted value */
+ switch(InjectedRank)
+ {
+ case ADC_INJECTED_RANK_4:
+ {
+ tmp = hadc->Instance->JDR4;
+ }
+ break;
+ case ADC_INJECTED_RANK_3:
+ {
+ tmp = hadc->Instance->JDR3;
+ }
+ break;
+ case ADC_INJECTED_RANK_2:
+ {
+ tmp = hadc->Instance->JDR2;
+ }
+ break;
+ case ADC_INJECTED_RANK_1:
+ {
+ tmp = hadc->Instance->JDR1;
+ }
+ break;
+ default:
+ break;
+ }
+ return tmp;
+}
+
+/**
+ * @brief Enables ADC DMA request after last transfer (Multi-ADC mode) and enables ADC peripheral
+ *
+ * @note Caution: This function must be used only with the ADC master.
+ *
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param pData: Pointer to buffer in which transferred from ADC peripheral to memory will be stored.
+ * @param Length: The length of data to be transferred from ADC peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
+{
+ __IO uint32_t counter = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+ assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+ assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Check if ADC peripheral is disabled in order to enable it and wait during
+ Tstab time the ADC's stabilization */
+ if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+ {
+ /* Enable the Peripheral */
+ __HAL_ADC_ENABLE(hadc);
+
+ /* Delay for temperature sensor stabilization time */
+ /* Compute number of CPU cycles to wait for */
+ counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000U));
+ while(counter != 0U)
+ {
+ counter--;
+ }
+ }
+
+ /* Start conversion if ADC is effectively enabled */
+ if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Set ADC state */
+ /* - Clear state bitfield related to regular group conversion results */
+ /* - Set state bitfield related to regular group operation */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
+ HAL_ADC_STATE_REG_BUSY);
+
+ /* If conversions on group regular are also triggering group injected, */
+ /* update ADC state. */
+ if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
+ {
+ ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);
+ }
+
+ /* State machine update: Check if an injected conversion is ongoing */
+ if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+ {
+ /* Reset ADC error code fields related to conversions on group regular */
+ CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));
+ }
+ else
+ {
+ /* Reset ADC all error code fields */
+ ADC_CLEAR_ERRORCODE(hadc);
+ }
+
+ /* Process unlocked */
+ /* Unlock before starting ADC conversions: in case of potential */
+ /* interruption, to let the process to ADC IRQ Handler. */
+ __HAL_UNLOCK(hadc);
+
+ /* Set the DMA transfer complete callback */
+ hadc->DMA_Handle->XferCpltCallback = ADC_MultiModeDMAConvCplt;
+
+ /* Set the DMA half transfer complete callback */
+ hadc->DMA_Handle->XferHalfCpltCallback = ADC_MultiModeDMAHalfConvCplt;
+
+ /* Set the DMA error callback */
+ hadc->DMA_Handle->XferErrorCallback = ADC_MultiModeDMAError ;
+
+ /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */
+ /* start (in case of SW start): */
+
+ /* Clear regular group conversion flag and overrun flag */
+ /* (To ensure of no unknown state from potential previous ADC operations) */
+ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC);
+
+ /* Enable ADC overrun interrupt */
+ __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
+
+ if (hadc->Init.DMAContinuousRequests != DISABLE)
+ {
+ /* Enable the selected ADC DMA request after last transfer */
+ ADC->CCR |= ADC_CCR_DDS;
+ }
+ else
+ {
+ /* Disable the selected ADC EOC rising on each regular channel conversion */
+ ADC->CCR &= ~ADC_CCR_DDS;
+ }
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&ADC->CDR, (uint32_t)pData, Length);
+
+ /* if no external trigger present enable software conversion of regular channels */
+ if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+ {
+ /* Enable the selected ADC software conversion for regular group */
+ hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables ADC DMA (multi-ADC mode) and disables ADC peripheral
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc)
+{
+ HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Stop potential conversion on going, on regular and injected groups */
+ /* Disable ADC peripheral */
+ __HAL_ADC_DISABLE(hadc);
+
+ /* Check if ADC is effectively disabled */
+ if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+ {
+ /* Disable the selected ADC DMA mode for multimode */
+ ADC->CCR &= ~ADC_CCR_DDS;
+
+ /* Disable the DMA channel (in case of DMA in circular mode or stop while */
+ /* DMA transfer is on going) */
+ tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle);
+
+ /* Disable ADC overrun interrupt */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
+
+ /* Set ADC state */
+ ADC_STATE_CLR_SET(hadc->State,
+ HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+ HAL_ADC_STATE_READY);
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return tmp_hal_status;
+}
+
+/**
+ * @brief Returns the last ADC1, ADC2 and ADC3 regular conversions results
+ * data in the selected multi mode.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval The converted data value.
+ */
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc)
+{
+ /* Return the multi mode conversion value */
+ return ADC->CDR;
+}
+
+/**
+ * @brief Injected conversion complete callback in non blocking mode
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @retval None
+ */
+__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hadc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ADC_InjectedConvCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Configures for the selected ADC injected channel its corresponding
+ * rank in the sequencer and its sample time.
+ * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param sConfigInjected: ADC configuration structure for injected channel.
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected)
+{
+
+#ifdef USE_FULL_ASSERT
+ uint32_t tmp = 0U;
+#endif /* USE_FULL_ASSERT */
+
+ /* Check the parameters */
+ assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel));
+ assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank));
+ assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime));
+ assert_param(IS_ADC_EXT_INJEC_TRIG(sConfigInjected->ExternalTrigInjecConv));
+ assert_param(IS_ADC_INJECTED_LENGTH(sConfigInjected->InjectedNbrOfConversion));
+ assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv));
+ assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode));
+
+#ifdef USE_FULL_ASSERT
+ tmp = ADC_GET_RESOLUTION(hadc);
+ assert_param(IS_ADC_RANGE(tmp, sConfigInjected->InjectedOffset));
+#endif /* USE_FULL_ASSERT */
+
+ if(sConfigInjected->ExternalTrigInjecConvEdge != ADC_INJECTED_SOFTWARE_START)
+ {
+ assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(sConfigInjected->ExternalTrigInjecConvEdge));
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* if ADC_Channel_10 ... ADC_Channel_18 is selected */
+ if (sConfigInjected->InjectedChannel > ADC_CHANNEL_9)
+ {
+ /* Clear the old sample time */
+ hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfigInjected->InjectedChannel);
+
+ /* Set the new sample time */
+ hadc->Instance->SMPR1 |= ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
+ }
+ else /* ADC_Channel include in ADC_Channel_[0..9] */
+ {
+ /* Clear the old sample time */
+ hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel);
+
+ /* Set the new sample time */
+ hadc->Instance->SMPR2 |= ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
+ }
+
+ /*---------------------------- ADCx JSQR Configuration -----------------*/
+ hadc->Instance->JSQR &= ~(ADC_JSQR_JL);
+ hadc->Instance->JSQR |= ADC_SQR1(sConfigInjected->InjectedNbrOfConversion);
+
+ /* Rank configuration */
+
+ /* Clear the old SQx bits for the selected rank */
+ hadc->Instance->JSQR &= ~ADC_JSQR(ADC_JSQR_JSQ1, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
+
+ /* Set the SQx bits for the selected rank */
+ hadc->Instance->JSQR |= ADC_JSQR(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
+
+ /* Enable external trigger if trigger selection is different of software */
+ /* start. */
+ /* Note: This configuration keeps the hardware feature of parameter */
+ /* ExternalTrigConvEdge "trigger edge none" equivalent to */
+ /* software start. */
+ if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
+ {
+ /* Select external trigger to start conversion */
+ hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
+ hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConv;
+
+ /* Select external trigger polarity */
+ hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
+ hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConvEdge;
+ }
+ else
+ {
+ /* Reset the external trigger */
+ hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
+ hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
+ }
+
+ if (sConfigInjected->AutoInjectedConv != DISABLE)
+ {
+ /* Enable the selected ADC automatic injected group conversion */
+ hadc->Instance->CR1 |= ADC_CR1_JAUTO;
+ }
+ else
+ {
+ /* Disable the selected ADC automatic injected group conversion */
+ hadc->Instance->CR1 &= ~(ADC_CR1_JAUTO);
+ }
+
+ if (sConfigInjected->InjectedDiscontinuousConvMode != DISABLE)
+ {
+ /* Enable the selected ADC injected discontinuous mode */
+ hadc->Instance->CR1 |= ADC_CR1_JDISCEN;
+ }
+ else
+ {
+ /* Disable the selected ADC injected discontinuous mode */
+ hadc->Instance->CR1 &= ~(ADC_CR1_JDISCEN);
+ }
+
+ switch(sConfigInjected->InjectedRank)
+ {
+ case 1U:
+ /* Set injected channel 1 offset */
+ hadc->Instance->JOFR1 &= ~(ADC_JOFR1_JOFFSET1);
+ hadc->Instance->JOFR1 |= sConfigInjected->InjectedOffset;
+ break;
+ case 2U:
+ /* Set injected channel 2 offset */
+ hadc->Instance->JOFR2 &= ~(ADC_JOFR2_JOFFSET2);
+ hadc->Instance->JOFR2 |= sConfigInjected->InjectedOffset;
+ break;
+ case 3U:
+ /* Set injected channel 3 offset */
+ hadc->Instance->JOFR3 &= ~(ADC_JOFR3_JOFFSET3);
+ hadc->Instance->JOFR3 |= sConfigInjected->InjectedOffset;
+ break;
+ default:
+ /* Set injected channel 4 offset */
+ hadc->Instance->JOFR4 &= ~(ADC_JOFR4_JOFFSET4);
+ hadc->Instance->JOFR4 |= sConfigInjected->InjectedOffset;
+ break;
+ }
+
+ /* if ADC1 Channel_18 is selected enable VBAT Channel */
+ if ((hadc->Instance == ADC1) && (sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT))
+ {
+ /* Enable the VBAT channel*/
+ ADC->CCR |= ADC_CCR_VBATE;
+ }
+
+ /* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
+ if ((hadc->Instance == ADC1) && ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)))
+ {
+ /* Enable the TSVREFE channel*/
+ ADC->CCR |= ADC_CCR_TSVREFE;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the ADC multi-mode
+ * @param hadc : pointer to a ADC_HandleTypeDef structure that contains
+ * the configuration information for the specified ADC.
+ * @param multimode : pointer to an ADC_MultiModeTypeDef structure that contains
+ * the configuration information for multimode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_MODE(multimode->Mode));
+ assert_param(IS_ADC_DMA_ACCESS_MODE(multimode->DMAAccessMode));
+ assert_param(IS_ADC_SAMPLING_DELAY(multimode->TwoSamplingDelay));
+
+ /* Process locked */
+ __HAL_LOCK(hadc);
+
+ /* Set ADC mode */
+ ADC->CCR &= ~(ADC_CCR_MULTI);
+ ADC->CCR |= multimode->Mode;
+
+ /* Set the ADC DMA access mode */
+ ADC->CCR &= ~(ADC_CCR_DMA);
+ ADC->CCR |= multimode->DMAAccessMode;
+
+ /* Set delay between two sampling phases */
+ ADC->CCR &= ~(ADC_CCR_DELAY);
+ ADC->CCR |= multimode->TwoSamplingDelay;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Retrieve ADC handle corresponding to current DMA handle */
+ ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Update state machine on conversion status if not in error state */
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA))
+ {
+ /* Update ADC state machine */
+ SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
+
+ /* Determine whether any further conversion upcoming on group regular */
+ /* by external trigger, continuous mode or scan sequence on going. */
+ /* Note: On STM32F4, there is no independent flag of end of sequence. */
+ /* The test of scan sequence on going is done either with scan */
+ /* sequence disabled or with end of conversion flag set to */
+ /* of end of sequence. */
+ if(ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
+ (hadc->Init.ContinuousConvMode == DISABLE) &&
+ (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ||
+ HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS) ) )
+ {
+ /* Disable ADC end of single conversion interrupt on group regular */
+ /* Note: Overrun interrupt was enabled with EOC interrupt in */
+ /* HAL_ADC_Start_IT(), but is not disabled here because can be used */
+ /* by overrun IRQ process below. */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+
+ /* Set ADC state */
+ CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
+
+ if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+ {
+ SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+ }
+ }
+
+ /* Conversion complete callback */
+ HAL_ADC_ConvCpltCallback(hadc);
+ }
+ else
+ {
+ /* Call DMA error callback */
+ hadc->DMA_Handle->XferErrorCallback(hdma);
+ }
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma)
+{
+ ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* Conversion complete callback */
+ HAL_ADC_ConvHalfCpltCallback(hadc);
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma)
+{
+ ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hadc->State= HAL_ADC_STATE_ERROR_DMA;
+ /* Set ADC error code to DMA error */
+ hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
+ HAL_ADC_ErrorCallback(hadc);
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,413 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of ADC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_EX_H
+#define __STM32F4xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Types ADC Exported Types
+ * @{
+ */
+
+/**
+ * @brief ADC Configuration injected Channel structure definition
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
+ * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+ * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+ * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled
+ * - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group.
+ * - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group.
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
+ This parameter can be a value of @ref ADC_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t InjectedRank; /*!< Rank in the injected group sequencer
+ This parameter must be a value of @ref ADCEx_injected_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
+ This parameter can be a value of @ref ADC_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+ Offset value must be a positive number.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+ this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+ To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+ This parameter can be set to ENABLE or DISABLE.
+ Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+ Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+ Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+ To maintain JAUTO always enabled, DMA must be configured in circular mode.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
+ If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+ If set to external trigger source, triggering is on event rising edge.
+ This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group.
+ This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
+ If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef;
+
+/**
+ * @brief ADC Configuration multi-mode structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
+ This parameter can be a value of @ref ADCEx_Common_mode */
+ uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode.
+ This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
+ uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
+ This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
+}ADC_MultiModeTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+/** @defgroup ADCEx_Common_mode ADC Common Mode
+ * @{
+ */
+#define ADC_MODE_INDEPENDENT ((uint32_t)0x00000000U)
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0)
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1)
+#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode
+ * @{
+ */
+#define ADC_DMAACCESSMODE_DISABLED ((uint32_t)0x00000000U) /*!< DMA mode disabled */
+#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
+#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
+#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE ((uint32_t)0x00000000U)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ((uint32_t)0x00000000U)
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)ADC_CR2_JEXTSEL_0)
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)ADC_CR2_JEXTSEL_1)
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC2 ((uint32_t)ADC_CR2_JEXTSEL_2)
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ((uint32_t)ADC_CR2_JEXTSEL_3)
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ((uint32_t)ADC_CR2_JEXTSEL)
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)ADC_CR2_JEXTSEL + 1U)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_rank ADC Injected Rank
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001U)
+#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002U)
+#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003U)
+#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004U)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_channels ADC Specific Channels
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
+ defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \
+ defined(STM32F412Cx)
+#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_16)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cxs */
+
+#if defined(STM32F411xE) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT ((uint32_t)0x10000000U) /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */
+#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_18 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT)
+#endif /* STM32F411xE || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/**
+ * @brief Disable internal path of ADC channel Vbat
+ * @Note Use case of this macro:
+ * On devices STM32F42x and STM32F43x, ADC internal channels
+ * Vbat and VrefInt share the same internal path, only
+ * one of them can be enabled.This macro is to be used when ADC
+ * channels Vbat and VrefInt are selected, and must be called
+ * before starting conversion of ADC channel VrefInt in order
+ * to disable ADC channel Vbat.
+ * @retval None
+ */
+#define __HAL_ADC_PATH_INTERNAL_VBAT_DISABLE() (ADC->CCR &= ~(ADC_CCR_VBATE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup ADCEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Constants ADC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Macros ADC Private Macros
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
+ ((MODE) == ADC_DUALMODE_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT) || \
+ ((MODE) == ADC_DUALMODE_INTERL) || \
+ ((MODE) == ADC_DUALMODE_ALTERTRIG) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \
+ ((MODE) == ADC_TRIPLEMODE_INJECSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_INTERL) || \
+ ((MODE) == ADC_TRIPLEMODE_ALTERTRIG))
+#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
+ ((MODE) == ADC_DMAACCESSMODE_1) || \
+ ((MODE) == ADC_DMAACCESSMODE_2) || \
+ ((MODE) == ADC_DMAACCESSMODE_3))
+#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15)|| \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START))
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1U)) && ((LENGTH) <= ((uint32_t)4U)))
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= ((uint32_t)1U)) && ((RANK) <= ((uint32_t)4U)))
+
+/**
+ * @brief Set the selected injected Channel rank.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define ADC_JSQR(_CHANNELNB_, _RANKNB_, _JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * (uint8_t)(((_RANKNB_) + 3U) - (_JSQR_JL_))))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Functions ADC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1433 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_can.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the Controller Area Network (CAN) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Error functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable the CAN controller interface clock using
+ __HAL_RCC_CAN1_CLK_ENABLE() for CAN1 and __HAL_RCC_CAN2_CLK_ENABLE() for CAN2
+ -@- In case you are using CAN2 only, you have to enable the CAN1 clock.
+
+ (#) CAN pins configuration
+ (++) Enable the clock for the CAN GPIOs using the following function:
+ __GPIOx_CLK_ENABLE()
+ (++) Connect and configure the involved CAN pins to AF9 using the
+ following function HAL_GPIO_Init()
+
+ (#) Initialize and configure the CAN using CAN_Init() function.
+
+ (#) Transmit the desired CAN frame using HAL_CAN_Transmit() function.
+
+ (#) Receive a CAN frame using HAL_CAN_Receive() function.
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Start the CAN peripheral transmission and wait the end of this operation
+ using HAL_CAN_Transmit(), at this stage user can specify the value of timeout
+ according to his end application
+ (+) Start the CAN peripheral reception and wait the end of this operation
+ using HAL_CAN_Receive(), at this stage user can specify the value of timeout
+ according to his end application
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Start the CAN peripheral transmission using HAL_CAN_Transmit_IT()
+ (+) Start the CAN peripheral reception using HAL_CAN_Receive_IT()
+ (+) Use HAL_CAN_IRQHandler() called under the used CAN Interrupt subroutine
+ (+) At CAN end of transmission HAL_CAN_TxCpltCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_CAN_TxCpltCallback
+ (+) In case of CAN Error, HAL_CAN_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_CAN_ErrorCallback
+
+ *** CAN HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in CAN HAL driver.
+
+ (+) __HAL_CAN_ENABLE_IT: Enable the specified CAN interrupts
+ (+) __HAL_CAN_DISABLE_IT: Disable the specified CAN interrupts
+ (+) __HAL_CAN_GET_IT_SOURCE: Check if the specified CAN interrupt source is enabled or disabled
+ (+) __HAL_CAN_CLEAR_FLAG: Clear the CAN's pending flags
+ (+) __HAL_CAN_GET_FLAG: Get the selected CAN's flag status
+
+ [..]
+ (@) You can refer to the CAN HAL driver header file for more useful macros
+
+ @endverbatim
+
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CAN CAN
+ * @brief CAN driver modules
+ * @{
+ */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CAN_Private_Constants
+ * @{
+ */
+#define CAN_TIMEOUT_VALUE 10U
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup CAN_Private_Functions
+ * @{
+ */
+static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber);
+static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CAN_Exported_Functions CAN Exported Functions
+ * @{
+ */
+
+/** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the CAN.
+ (+) De-initialize the CAN.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CAN peripheral according to the specified
+ * parameters in the CAN_InitStruct.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan)
+{
+ uint32_t InitStatus = 3U;
+ uint32_t tickstart = 0U;
+
+ /* Check CAN handle */
+ if(hcan == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TTCM));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.ABOM));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.AWUM));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.NART));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.RFLM));
+ assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TXFP));
+ assert_param(IS_CAN_MODE(hcan->Init.Mode));
+ assert_param(IS_CAN_SJW(hcan->Init.SJW));
+ assert_param(IS_CAN_BS1(hcan->Init.BS1));
+ assert_param(IS_CAN_BS2(hcan->Init.BS2));
+ assert_param(IS_CAN_PRESCALER(hcan->Init.Prescaler));
+
+
+ if(hcan->State == HAL_CAN_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hcan->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_CAN_MspInit(hcan);
+ }
+
+ /* Initialize the CAN state*/
+ hcan->State = HAL_CAN_STATE_BUSY;
+
+ /* Exit from sleep mode */
+ hcan->Instance->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
+
+ /* Request initialisation */
+ hcan->Instance->MCR |= CAN_MCR_INRQ ;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait the acknowledge */
+ while((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+ {
+ if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
+ {
+ hcan->State= HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check acknowledge */
+ if ((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+ {
+ InitStatus = CAN_INITSTATUS_FAILED;
+ }
+ else
+ {
+ /* Set the time triggered communication mode */
+ if (hcan->Init.TTCM == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_TTCM;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TTCM;
+ }
+
+ /* Set the automatic bus-off management */
+ if (hcan->Init.ABOM == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_ABOM;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_ABOM;
+ }
+
+ /* Set the automatic wake-up mode */
+ if (hcan->Init.AWUM == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_AWUM;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_AWUM;
+ }
+
+ /* Set the no automatic retransmission */
+ if (hcan->Init.NART == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_NART;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_NART;
+ }
+
+ /* Set the receive FIFO locked mode */
+ if (hcan->Init.RFLM == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_RFLM;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_RFLM;
+ }
+
+ /* Set the transmit FIFO priority */
+ if (hcan->Init.TXFP == ENABLE)
+ {
+ hcan->Instance->MCR |= CAN_MCR_TXFP;
+ }
+ else
+ {
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TXFP;
+ }
+
+ /* Set the bit timing register */
+ hcan->Instance->BTR = (uint32_t)((uint32_t)hcan->Init.Mode) | \
+ ((uint32_t)hcan->Init.SJW) | \
+ ((uint32_t)hcan->Init.BS1) | \
+ ((uint32_t)hcan->Init.BS2) | \
+ ((uint32_t)hcan->Init.Prescaler - 1U);
+
+ /* Request leave initialisation */
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait the acknowledge */
+ while((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+ {
+ if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
+ {
+ hcan->State= HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check acknowledged */
+ if ((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+ {
+ InitStatus = CAN_INITSTATUS_FAILED;
+ }
+ else
+ {
+ InitStatus = CAN_INITSTATUS_SUCCESS;
+ }
+ }
+
+ if(InitStatus == CAN_INITSTATUS_SUCCESS)
+ {
+ /* Set CAN error code to none */
+ hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+ /* Initialize the CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ /* Initialize the CAN state */
+ hcan->State = HAL_CAN_STATE_ERROR;
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configures the CAN reception filter according to the specified
+ * parameters in the CAN_FilterInitStruct.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param sFilterConfig: pointer to a CAN_FilterConfTypeDef structure that
+ * contains the filter configuration information.
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig)
+{
+ uint32_t filternbrbitpos = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_FILTER_NUMBER(sFilterConfig->FilterNumber));
+ assert_param(IS_CAN_FILTER_MODE(sFilterConfig->FilterMode));
+ assert_param(IS_CAN_FILTER_SCALE(sFilterConfig->FilterScale));
+ assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment));
+ assert_param(IS_FUNCTIONAL_STATE(sFilterConfig->FilterActivation));
+ assert_param(IS_CAN_BANKNUMBER(sFilterConfig->BankNumber));
+
+ filternbrbitpos = ((uint32_t)1U) << sFilterConfig->FilterNumber;
+
+ /* Initialisation mode for the filter */
+ CAN1->FMR |= (uint32_t)CAN_FMR_FINIT;
+
+ /* Select the start slave bank */
+ CAN1->FMR &= ~((uint32_t)CAN_FMR_CAN2SB);
+ CAN1->FMR |= (uint32_t)(sFilterConfig->BankNumber << 8U);
+
+ /* Filter Deactivation */
+ CAN1->FA1R &= ~(uint32_t)filternbrbitpos;
+
+ /* Filter Scale */
+ if (sFilterConfig->FilterScale == CAN_FILTERSCALE_16BIT)
+ {
+ /* 16-bit scale for the filter */
+ CAN1->FS1R &= ~(uint32_t)filternbrbitpos;
+
+ /* First 16-bit identifier and First 16-bit mask */
+ /* Or First 16-bit identifier and Second 16-bit identifier */
+ CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
+ ((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdLow) << 16U) |
+ (0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdLow);
+
+ /* Second 16-bit identifier and Second 16-bit mask */
+ /* Or Third 16-bit identifier and Fourth 16-bit identifier */
+ CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
+ ((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16U) |
+ (0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdHigh);
+ }
+
+ if (sFilterConfig->FilterScale == CAN_FILTERSCALE_32BIT)
+ {
+ /* 32-bit scale for the filter */
+ CAN1->FS1R |= filternbrbitpos;
+ /* 32-bit identifier or First 32-bit identifier */
+ CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
+ ((0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdHigh) << 16U) |
+ (0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdLow);
+ /* 32-bit mask or Second 32-bit identifier */
+ CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
+ ((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16U) |
+ (0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdLow);
+ }
+
+ /* Filter Mode */
+ if (sFilterConfig->FilterMode == CAN_FILTERMODE_IDMASK)
+ {
+ /*Id/Mask mode for the filter*/
+ CAN1->FM1R &= ~(uint32_t)filternbrbitpos;
+ }
+ else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
+ {
+ /*Identifier list mode for the filter*/
+ CAN1->FM1R |= (uint32_t)filternbrbitpos;
+ }
+
+ /* Filter FIFO assignment */
+ if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO0)
+ {
+ /* FIFO 0 assignation for the filter */
+ CAN1->FFA1R &= ~(uint32_t)filternbrbitpos;
+ }
+
+ if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO1)
+ {
+ /* FIFO 1 assignation for the filter */
+ CAN1->FFA1R |= (uint32_t)filternbrbitpos;
+ }
+
+ /* Filter activation */
+ if (sFilterConfig->FilterActivation == ENABLE)
+ {
+ CAN1->FA1R |= filternbrbitpos;
+ }
+
+ /* Leave the initialisation mode for the filter */
+ CAN1->FMR &= ~((uint32_t)CAN_FMR_FINIT);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the CANx peripheral registers to their default reset values.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan)
+{
+ /* Check CAN handle */
+ if(hcan == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_CAN_MspDeInit(hcan);
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CAN MSP.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcan);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the CAN MSP.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcan);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Transmit a CAN frame message.
+ (+) Receive a CAN frame message.
+ (+) Enter CAN peripheral in sleep mode.
+ (+) Wake up the CAN peripheral from sleep mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initiates and transmits a CAN frame message.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
+{
+ uint32_t transmitmailbox = 5U;
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
+ assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
+ assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
+
+ if(((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) || \
+ ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) || \
+ ((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2))
+ {
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ }
+
+ /* Select one empty transmit mailbox */
+ if ((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+ {
+ transmitmailbox = 0U;
+ }
+ else if ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+ {
+ transmitmailbox = 1U;
+ }
+ else
+ {
+ transmitmailbox = 2U;
+ }
+
+ /* Set up the Id */
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+ if (hcan->pTxMsg->IDE == CAN_ID_STD)
+ {
+ assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21U) | \
+ hcan->pTxMsg->RTR);
+ }
+ else
+ {
+ assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3U) | \
+ hcan->pTxMsg->IDE | \
+ hcan->pTxMsg->RTR);
+ }
+
+ /* Set up the DLC */
+ hcan->pTxMsg->DLC &= (uint8_t)0x0000000FU;
+ hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0U;
+ hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
+
+ /* Set up the data field */
+ hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3U] << 24U) |
+ ((uint32_t)hcan->pTxMsg->Data[2U] << 16U) |
+ ((uint32_t)hcan->pTxMsg->Data[1U] << 8U) |
+ ((uint32_t)hcan->pTxMsg->Data[0U]));
+ hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7U] << 24U) |
+ ((uint32_t)hcan->pTxMsg->Data[6U] << 16U) |
+ ((uint32_t)hcan->pTxMsg->Data[5U] << 8U) |
+ ((uint32_t)hcan->pTxMsg->Data[4U]));
+ /* Request transmission */
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check End of transmission flag */
+ while(!(__HAL_CAN_TRANSMIT_STATUS(hcan, transmitmailbox)))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hcan->State = HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_ERROR;
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initiates and transmits a CAN frame message.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
+{
+ uint32_t transmitmailbox = 5U;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
+ assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
+ assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
+
+ if(((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) || \
+ ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) || \
+ ((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcan);
+
+ /* Select one empty transmit mailbox */
+ if((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+ {
+ transmitmailbox = 0U;
+ }
+ else if((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+ {
+ transmitmailbox = 1U;
+ }
+ else
+ {
+ transmitmailbox = 2U;
+ }
+
+ /* Set up the Id */
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+ if(hcan->pTxMsg->IDE == CAN_ID_STD)
+ {
+ assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21U) | \
+ hcan->pTxMsg->RTR);
+ }
+ else
+ {
+ assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3U) | \
+ hcan->pTxMsg->IDE | \
+ hcan->pTxMsg->RTR);
+ }
+
+ /* Set up the DLC */
+ hcan->pTxMsg->DLC &= (uint8_t)0x0000000FU;
+ hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0U;
+ hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
+
+ /* Set up the data field */
+ hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3U] << 24U) |
+ ((uint32_t)hcan->pTxMsg->Data[2U] << 16U) |
+ ((uint32_t)hcan->pTxMsg->Data[1U] << 8U) |
+ ((uint32_t)hcan->pTxMsg->Data[0U]));
+ hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7U] << 24U) |
+ ((uint32_t)hcan->pTxMsg->Data[6U] << 16U) |
+ ((uint32_t)hcan->pTxMsg->Data[5U] << 8U) |
+ ((uint32_t)hcan->pTxMsg->Data[4U]));
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ }
+
+ /* Set CAN error code to none */
+ hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Enable Error warning Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
+
+ /* Enable Error passive Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
+
+ /* Enable Bus-off Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
+
+ /* Enable Last error code Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
+
+ /* Enable Error Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
+
+ /* Enable Transmit mailbox empty Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_TME);
+
+ /* Request transmission */
+ hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_ERROR;
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives a correct CAN frame.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param FIFONumber: FIFO Number value
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_FIFO(FIFONumber));
+
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_RX;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check pending message */
+ while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0U)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hcan->State = HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Get the Id */
+ hcan->pRxMsg->IDE = (uint8_t)0x04U & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ if (hcan->pRxMsg->IDE == CAN_ID_STD)
+ {
+ hcan->pRxMsg->StdId = (uint32_t)0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U);
+ }
+ else
+ {
+ hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U);
+ }
+
+ hcan->pRxMsg->RTR = (uint8_t)0x02U & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ /* Get the DLC */
+ hcan->pRxMsg->DLC = (uint8_t)0x0FU & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+ /* Get the FMI */
+ hcan->pRxMsg->FMI = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U);
+ /* Get the data field */
+ hcan->pRxMsg->Data[0U] = (uint8_t)0xFFU & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+ hcan->pRxMsg->Data[1U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U);
+ hcan->pRxMsg->Data[2U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U);
+ hcan->pRxMsg->Data[3U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U);
+ hcan->pRxMsg->Data[4U] = (uint8_t)0xFFU & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+ hcan->pRxMsg->Data[5U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U);
+ hcan->pRxMsg->Data[6U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U);
+ hcan->pRxMsg->Data[7U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U);
+
+ /* Release the FIFO */
+ if(FIFONumber == CAN_FIFO0)
+ {
+ /* Release FIFO0 */
+ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
+ }
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ /* Release FIFO1 */
+ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
+ }
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives a correct CAN frame.
+ * @param hcan: Pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param FIFONumber: Specify the FIFO number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_FIFO(FIFONumber));
+
+ tmp = hcan->State;
+ if((tmp == HAL_CAN_STATE_READY) || (tmp == HAL_CAN_STATE_BUSY_TX))
+ {
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_RX;
+ }
+
+ /* Set CAN error code to none */
+ hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+ /* Enable Error warning Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
+
+ /* Enable Error passive Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
+
+ /* Enable Bus-off Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
+
+ /* Enable Last error code Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
+
+ /* Enable Error Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ if(FIFONumber == CAN_FIFO0)
+ {
+ /* Enable FIFO 0 message pending Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP0);
+ }
+ else
+ {
+ /* Enable FIFO 1 message pending Interrupt */
+ __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP1);
+ }
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enters the Sleep (low power) mode.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef* hcan)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY;
+
+ /* Request Sleep mode */
+ hcan->Instance->MCR = (((hcan->Instance->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+ /* Sleep mode status */
+ if ((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait the acknowledge */
+ while((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
+ {
+ if((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE)
+ {
+ hcan->State = HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Wakes up the CAN peripheral from sleep mode, after that the CAN peripheral
+ * is in the normal mode.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hcan);
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY;
+
+ /* Wake up request */
+ hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Sleep mode status */
+ while((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
+ {
+ if((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE)
+ {
+ hcan->State= HAL_CAN_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+ return HAL_TIMEOUT;
+ }
+ }
+ if((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_ERROR;
+ }
+
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles CAN interrupt request
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U, tmp3 = 0U;
+
+ /* Check End of transmission flag */
+ if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME))
+ {
+ tmp1 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_0);
+ tmp2 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_1);
+ tmp3 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2);
+ if(tmp1 || tmp2 || tmp3)
+ {
+ /* Call transmit function */
+ CAN_Transmit_IT(hcan);
+ }
+ }
+
+ tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0);
+ /* Check End of reception flag for FIFO0 */
+ if((tmp1 != 0U) && tmp2)
+ {
+ /* Call receive function */
+ CAN_Receive_IT(hcan, CAN_FIFO0);
+ }
+
+ tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1);
+ /* Check End of reception flag for FIFO1 */
+ if((tmp1 != 0U) && tmp2)
+ {
+ /* Call receive function */
+ CAN_Receive_IT(hcan, CAN_FIFO1);
+ }
+
+ tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG);
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+ /* Check Error Warning Flag */
+ if(tmp1 && tmp2 && tmp3)
+ {
+ /* Set CAN error code to EWG error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_EWG;
+ }
+
+ tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EPV);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EPV);
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+ /* Check Error Passive Flag */
+ if(tmp1 && tmp2 && tmp3)
+ {
+ /* Set CAN error code to EPV error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_EPV;
+ }
+
+ tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_BOF);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_BOF);
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+ /* Check Bus-Off Flag */
+ if(tmp1 && tmp2 && tmp3)
+ {
+ /* Set CAN error code to BOF error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_BOF;
+ }
+
+ tmp1 = HAL_IS_BIT_CLR(hcan->Instance->ESR, CAN_ESR_LEC);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_LEC);
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+ /* Check Last error code Flag */
+ if((!tmp1) && tmp2 && tmp3)
+ {
+ tmp1 = (hcan->Instance->ESR) & CAN_ESR_LEC;
+ switch(tmp1)
+ {
+ case(CAN_ESR_LEC_0):
+ /* Set CAN error code to STF error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_STF;
+ break;
+ case(CAN_ESR_LEC_1):
+ /* Set CAN error code to FOR error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_FOR;
+ break;
+ case(CAN_ESR_LEC_1 | CAN_ESR_LEC_0):
+ /* Set CAN error code to ACK error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_ACK;
+ break;
+ case(CAN_ESR_LEC_2):
+ /* Set CAN error code to BR error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_BR;
+ break;
+ case(CAN_ESR_LEC_2 | CAN_ESR_LEC_0):
+ /* Set CAN error code to BD error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_BD;
+ break;
+ case(CAN_ESR_LEC_2 | CAN_ESR_LEC_1):
+ /* Set CAN error code to CRC error */
+ hcan->ErrorCode |= HAL_CAN_ERROR_CRC;
+ break;
+ default:
+ break;
+ }
+
+ /* Clear Last error code Flag */
+ hcan->Instance->ESR &= ~(CAN_ESR_LEC);
+ }
+
+ /* Call the Error call Back in case of Errors */
+ if(hcan->ErrorCode != HAL_CAN_ERROR_NONE)
+ {
+ /* Clear ERRI Flag */
+ hcan->Instance->MSR = CAN_MSR_ERRI;
+ /* Set the CAN state ready to be able to start again the process */
+ hcan->State = HAL_CAN_STATE_READY;
+ /* Call Error callback function */
+ HAL_CAN_ErrorCallback(hcan);
+ }
+}
+
+/**
+ * @brief Transmission complete callback in non blocking mode
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcan);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Transmission complete callback in non blocking mode
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcan);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error CAN callback.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval None
+ */
+__weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcan);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CAN_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
+ * @brief CAN Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Error functions #####
+ ==============================================================================
+ [..]
+ This subsection provides functions allowing to :
+ (+) Check the CAN state.
+ (+) Check CAN Errors detected during interrupt process
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the CAN state
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL state
+ */
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan)
+{
+ /* Return CAN state */
+ return hcan->State;
+}
+
+/**
+ * @brief Return the CAN error code
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval CAN Error Code
+ */
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan)
+{
+ return hcan->ErrorCode;
+}
+
+/**
+ * @}
+ */
+/**
+ * @brief Initiates and transmits a CAN frame message.
+ * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
+{
+ /* Disable Transmit mailbox empty Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME);
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+ {
+ /* Disable Error warning Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
+
+ /* Disable Error passive Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
+
+ /* Disable Bus-off Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
+
+ /* Disable Last error code Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
+
+ /* Disable Error Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
+ }
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_RX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+ }
+
+ /* Transmission complete callback */
+ HAL_CAN_TxCpltCallback(hcan);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives a correct CAN frame.
+ * @param hcan: Pointer to a CAN_HandleTypeDef structure that contains
+ * the configuration information for the specified CAN.
+ * @param FIFONumber: Specify the FIFO number
+ * @retval HAL status
+ * @retval None
+ */
+static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
+{
+ /* Get the Id */
+ hcan->pRxMsg->IDE = (uint8_t)0x04U & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ if (hcan->pRxMsg->IDE == CAN_ID_STD)
+ {
+ hcan->pRxMsg->StdId = (uint32_t)0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U);
+ }
+ else
+ {
+ hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U);
+ }
+
+ hcan->pRxMsg->RTR = (uint8_t)0x02U & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+ /* Get the DLC */
+ hcan->pRxMsg->DLC = (uint8_t)0x0FU & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+ /* Get the FMI */
+ hcan->pRxMsg->FMI = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U);
+ /* Get the data field */
+ hcan->pRxMsg->Data[0U] = (uint8_t)0xFFU & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+ hcan->pRxMsg->Data[1U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U);
+ hcan->pRxMsg->Data[2U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U);
+ hcan->pRxMsg->Data[3U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U);
+ hcan->pRxMsg->Data[4U] = (uint8_t)0xFFU & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+ hcan->pRxMsg->Data[5U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U);
+ hcan->pRxMsg->Data[6U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U);
+ hcan->pRxMsg->Data[7U] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U);
+ /* Release the FIFO */
+ /* Release FIFO0 */
+ if (FIFONumber == CAN_FIFO0)
+ {
+ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
+
+ /* Disable FIFO 0 message pending Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP0);
+ }
+ /* Release FIFO1 */
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
+
+ /* Disable FIFO 1 message pending Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP1);
+ }
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+ {
+ /* Disable Error warning Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
+
+ /* Disable Error passive Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
+
+ /* Disable Bus-off Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
+
+ /* Disable Last error code Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
+
+ /* Disable Error Interrupt */
+ __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
+ }
+
+ if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+ {
+ /* Disable CAN state */
+ hcan->State = HAL_CAN_STATE_BUSY_TX;
+ }
+ else
+ {
+ /* Change CAN state */
+ hcan->State = HAL_CAN_STATE_READY;
+ }
+
+ /* Receive complete callback */
+ HAL_CAN_RxCpltCallback(hcan);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif
+#endif /* HAL_CAN_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,777 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_can.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of CAN HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CAN_H
+#define __STM32F4xx_HAL_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX = 0x22U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX = 0x32U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_CAN_STATE_ERROR = 0x04U /*!< CAN error state */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE */
+}CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 27 */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t BankNumber; /*!< Select the start slave bank filter.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
+
+}CAN_FilterConfTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFFU */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_Identifier_Type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+}CanTxMsgTypeDef;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFFU */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_Identifier_Type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+ uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+ This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
+
+ __IO uint32_t ErrorCode; /*!< CAN Error code */
+
+}CAN_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+ * @{
+ */
+
+/** @defgroup HAL_CAN_Error_Code HAL CAN Error Code
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE 0x00U /*!< No error */
+#define HAL_CAN_ERROR_EWG 0x01U /*!< EWG error */
+#define HAL_CAN_ERROR_EPV 0x02U /*!< EPV error */
+#define HAL_CAN_ERROR_BOF 0x04U /*!< BOF error */
+#define HAL_CAN_ERROR_STF 0x08U /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR 0x10U /*!< Form error */
+#define HAL_CAN_ERROR_ACK 0x20U /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR 0x40U /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD 0x80U /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC 0x100U /*!< LEC transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED ((uint8_t)0x00U) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS ((uint8_t)0x01U) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+ * @{
+ */
+#define CAN_MODE_NORMAL ((uint32_t)0x00000000U) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronisation Jump Width
+ * @{
+ */
+#define CAN_SJW_1TQ ((uint32_t)0x00000000U) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in bit segment 1
+ * @{
+ */
+#define CAN_BS1_1TQ ((uint32_t)0x00000000U) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2
+ * @{
+ */
+#define CAN_BS2_1TQ ((uint32_t)0x00000000U) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode CAN Filter Mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00U) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01U) /*!< Identifier list mode */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00U) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01U) /*!< One 32-bit filter */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 ((uint8_t)0x00U) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 ((uint8_t)0x01U) /*!< Filter FIFO 1 assignment for filter x */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Identifier_Type CAN Identifier Type
+ * @{
+ */
+#define CAN_ID_STD ((uint32_t)0x00000000U) /*!< Standard Id */
+#define CAN_ID_EXT ((uint32_t)0x00000004U) /*!< Extended Id */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+ * @{
+ */
+#define CAN_RTR_DATA ((uint32_t)0x00000000U) /*!< Data frame */
+#define CAN_RTR_REMOTE ((uint32_t)0x00000002U) /*!< Remote frame */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number Constants
+ * @{
+ */
+#define CAN_FIFO0 ((uint8_t)0x00U) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01U) /*!< CAN FIFO 1 used to receive */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags CAN Flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+ CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x00000500U) /*!< Request MailBox0 flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x00000508U) /*!< Request MailBox1 flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x00000510U) /*!< Request MailBox2 flag */
+#define CAN_FLAG_TXOK0 ((uint32_t)0x00000501U) /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1 ((uint32_t)0x00000509U) /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2 ((uint32_t)0x00000511U) /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0 ((uint32_t)0x0000051AU) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 ((uint32_t)0x0000051BU) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2 ((uint32_t)0x0000051CU) /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 ((uint32_t)0x00000203U) /*!< FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x00000204U) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1 ((uint32_t)0x00000403U) /*!< FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x00000404U) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_INAK ((uint32_t)0x00000100U) /*!< Initialization acknowledge flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x00000101U) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_ERRI ((uint32_t)0x00000102U) /*!< Error flag */
+#define CAN_FLAG_WKU ((uint32_t)0x00000103U) /*!< Wake up flag */
+#define CAN_FLAG_SLAKI ((uint32_t)0x00000104U) /*!< Sleep acknowledge flag */
+
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x00000300U) /*!< Error warning flag */
+#define CAN_FLAG_EPV ((uint32_t)0x00000301U) /*!< Error passive flag */
+#define CAN_FLAG_BOF ((uint32_t)0x00000302U) /*!< Bus-Off flag */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Interrupts CAN Interrupts
+ * @{
+ */
+#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Mailboxes_Definition CAN Mailboxes Definition
+ * @{
+ */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00U)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01U)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+ * @{
+ */
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @retval None
+ */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+ * @brief Enable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Return the number of pending received messages.
+ * @param __HANDLE__: CAN handle
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval The number of pending message.
+ */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R & (uint32_t)0x03U)))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__: CAN Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__: CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = ((uint32_t)1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = ((uint32_t)1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = ((uint32_t)1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__HANDLE__)->Instance->MSR) = ((uint32_t)1U << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__: CAN Handle
+ * @param __INTERRUPT__: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enable
+ * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check the transmission status of a CAN Frame.
+ * @param __HANDLE__: CAN Handle
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval The new status of transmission (TRUE or FALSE).
+ */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+/**
+ * @brief Release the specified receive FIFO.
+ * @param __HANDLE__: CAN handle
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None
+ */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1))
+
+/**
+ * @brief Cancel a transmit request.
+ * @param __HANDLE__: CAN Handle
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval None
+ */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ2))
+
+/**
+ * @brief Enable or disable the DBG Freeze for CAN.
+ * @param __HANDLE__: CAN Handle
+ * @param __NEWSTATE__: new state of the CAN peripheral.
+ * This parameter can be: ENABLE (CAN reception/transmission is frozen
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * or DISABLE (CAN is working during debug).
+ * @retval None
+ */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ***************************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CAN_Private_Types CAN Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Variables CAN Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+ * @{
+ */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04U) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+#define CAN_FLAG_MASK ((uint32_t)0x000000FFU)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros CAN Private Macros
+ * @{
+ */
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U)
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U)
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02U))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FFU))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFFU))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08U))
+
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Functions CAN Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,670 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cec.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief CEC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the High Definition Multimedia Interface
+ * Consumer Electronics Control Peripheral (CEC).
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ *
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The CEC HAL driver can be used as follow:
+
+ (#) Declare a CEC_HandleTypeDef handle structure.
+ (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API:
+ (##) Enable the CEC interface clock.
+ (##) CEC pins configuration:
+ (+) Enable the clock for the CEC GPIOs.
+ (+) Configure these CEC pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT()
+ and HAL_CEC_Receive_IT() APIs):
+ (+) Configure the CEC interrupt priority.
+ (+) Enable the NVIC CEC IRQ handle.
+ (@) The specific CEC interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit
+ and receive process.
+
+ (#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in
+ in case of Bit Rising Error, Error-Bit generation conditions, device logical
+ address and Listen mode in the hcec Init structure.
+
+ (#) Initialize the CEC registers by calling the HAL_CEC_Init() API.
+
+ (@) This API (HAL_CEC_Init()) configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customed HAL_CEC_MspInit() API.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CEC CEC
+ * @brief HAL CEC module driver
+ * @{
+ */
+#ifdef HAL_CEC_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CEC_Exported_Functions CEC Exported Functions
+ * @{
+ */
+
+/** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the CEC
+ (+) The following parameters need to be configured:
+ (++) SignalFreeTime
+ (++) Tolerance
+ (++) BRERxStop (RX stopped or not upon Bit Rising Error)
+ (++) BREErrorBitGen (Error-Bit generation in case of Bit Rising Error)
+ (++) LBPEErrorBitGen (Error-Bit generation in case of Long Bit Period Error)
+ (++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error)
+ (++) SignalFreeTimeOption (SFT Timer start definition)
+ (++) OwnAddress (CEC device address)
+ (++) ListenMode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CEC mode according to the specified
+ * parameters in the CEC_InitTypeDef and creates the associated handle .
+ * @param hcec: CEC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec)
+{
+ /* Check the CEC handle allocation */
+ if((hcec == NULL) ||(hcec->Init.RxBuffer == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+ assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime));
+ assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance));
+ assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop));
+ assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen));
+ assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen));
+ assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen));
+ assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption));
+ assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode));
+ assert_param(IS_CEC_OWN_ADDRESS(hcec->Init.OwnAddress));
+
+ if(hcec->gState == HAL_CEC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hcec->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_CEC_MspInit(hcec);
+ }
+ hcec->gState = HAL_CEC_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ /* Write to CEC Control Register */
+ hcec->Instance->CFGR = hcec->Init.SignalFreeTime | hcec->Init.Tolerance | hcec->Init.BRERxStop|\
+ hcec->Init.BREErrorBitGen | hcec->Init.LBPEErrorBitGen | hcec->Init.BroadcastMsgNoErrorBitGen |\
+ hcec->Init.SignalFreeTimeOption |((uint32_t)(hcec->Init.OwnAddress)<<16U) |\
+ hcec->Init.ListenMode;
+
+ /* Enable the following CEC Transmission/Reception interrupts as
+ * well as the following CEC Transmission/Reception Errors interrupts
+ * Rx Byte Received IT
+ * End of Reception IT
+ * Rx overrun
+ * Rx bit rising error
+ * Rx short bit period error
+ * Rx long bit period error
+ * Rx missing acknowledge
+ * Tx Byte Request IT
+ * End of Transmission IT
+ * Tx Missing Acknowledge IT
+ * Tx-Error IT
+ * Tx-Buffer Underrun IT
+ * Tx arbitration lost */
+ __HAL_CEC_ENABLE_IT(hcec, CEC_IT_RXBR|CEC_IT_RXEND|CEC_IER_RX_ALL_ERR|CEC_IT_TXBR|CEC_IT_TXEND|CEC_IER_TX_ALL_ERR);
+
+ /* Enable the CEC Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ hcec->gState = HAL_CEC_STATE_READY;
+ hcec->RxState = HAL_CEC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the CEC peripheral
+ * @param hcec: CEC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec)
+{
+ /* Check the CEC handle allocation */
+ if(hcec == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+
+ hcec->gState = HAL_CEC_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_CEC_MspDeInit(hcec);
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ /* Clear Flags */
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXEND|CEC_FLAG_TXBR|CEC_FLAG_RXBR|CEC_FLAG_RXEND|CEC_ISR_ALL_ERROR);
+
+ /* Disable the following CEC Transmission/Reception interrupts as
+ * well as the following CEC Transmission/Reception Errors interrupts
+ * Rx Byte Received IT
+ * End of Reception IT
+ * Rx overrun
+ * Rx bit rising error
+ * Rx short bit period error
+ * Rx long bit period error
+ * Rx missing acknowledge
+ * Tx Byte Request IT
+ * End of Transmission IT
+ * Tx Missing Acknowledge IT
+ * Tx-Error IT
+ * Tx-Buffer Underrun IT
+ * Tx arbitration lost */
+ __HAL_CEC_DISABLE_IT(hcec, CEC_IT_RXBR|CEC_IT_RXEND|CEC_IER_RX_ALL_ERR|CEC_IT_TXBR|CEC_IT_TXEND|CEC_IER_TX_ALL_ERR);
+
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ hcec->gState = HAL_CEC_STATE_RESET;
+ hcec->RxState = HAL_CEC_STATE_RESET;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hcec);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the Own Address of the CEC device
+ * @param hcec: CEC handle
+ * @param CEC_OwnAddress: The CEC own address.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress)
+{
+ /* Check the parameters */
+ assert_param(IS_CEC_OWN_ADDRESS(CEC_OwnAddress));
+
+ if ((hcec->gState == HAL_CEC_STATE_READY) && (hcec->RxState == HAL_CEC_STATE_READY))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+
+ hcec->gState = HAL_CEC_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ if(CEC_OwnAddress != CEC_OWN_ADDRESS_NONE)
+ {
+ hcec->Instance->CFGR |= ((uint32_t)CEC_OwnAddress<<16);
+ }
+ else
+ {
+ hcec->Instance->CFGR &= ~(CEC_CFGR_OAR);
+ }
+
+ hcec->gState = HAL_CEC_STATE_READY;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+
+ /* Enable the Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief CEC MSP Init
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief CEC MSP DeInit
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions
+ * @brief CEC Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the CEC data transfers.
+
+ (#) The CEC handle must contain the initiator (TX side) and the destination (RX side)
+ logical addresses (4-bit long addresses, 0x0F for broadcast messages destination)
+
+ (#) The communication is performed using Interrupts.
+ These API's return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated CEC IRQ when using Interrupt mode.
+ The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks
+ will be executed respectivelly at the end of the transmit or Receive process
+ The HAL_CEC_ErrorCallback()user callback will be executed when a communication
+ error is detected
+
+ (#) API's with Interrupt are :
+ (+) HAL_CEC_Transmit_IT()
+ (+) HAL_CEC_IRQHandler()
+
+ (#) A set of User Callbacks are provided:
+ (+) HAL_CEC_TxCpltCallback()
+ (+) HAL_CEC_RxCpltCallback()
+ (+) HAL_CEC_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send data in interrupt mode
+ * @param hcec: CEC handle
+ * @param DestinationAddress: destination logical address
+ * @param pData: pointer to input byte data buffer
+ * @param Size: amount of data to be sent in bytes (without counting the header).
+ * 0 means only the header is sent (ping operation).
+ * Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size)
+{
+ /* if the IP isn't already busy and if there is no previous transmission
+ already pending due to arbitration lost */
+ if (hcec->gState == HAL_CEC_STATE_READY)
+ {
+ if((pData == NULL ) && (Size > 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_CEC_ADDRESS(DestinationAddress));
+ assert_param(IS_CEC_ADDRESS(InitiatorAddress));
+ assert_param(IS_CEC_MSGSIZE(Size));
+
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+ hcec->pTxBuffPtr = pData;
+ hcec->gState = HAL_CEC_STATE_BUSY_TX;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+
+ /* initialize the number of bytes to send,
+ * 0 means only one header is sent (ping operation) */
+ hcec->TxXferCount = Size;
+
+ /* in case of no payload (Size = 0), sender is only pinging the system;
+ Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
+ if (Size == 0U)
+ {
+ __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+ }
+
+ /* send header block */
+ hcec->Instance->TXDR = ((uint8_t)(InitiatorAddress << CEC_INITIATOR_LSB_POS) |(uint8_t) DestinationAddress);
+ /* Set TX Start of Message (TXSOM) bit */
+ __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+
+ return HAL_OK;
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Get size of the received frame.
+ * @param hcec: CEC handle
+ * @retval Frame size
+ */
+uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec)
+{
+ return hcec->RxXferSize;
+}
+
+/**
+ * @brief Change Rx Buffer.
+ * @param hcec: CEC handle
+ * @note This function can be called only inside the HAL_CEC_RxCpltCallback()
+ * @retval Frame size
+ */
+void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer)
+{
+ hcec->Init.RxBuffer = Rxbuffer;
+}
+
+/**
+ * @brief This function handles CEC interrupt requests.
+ * @param hcec: CEC handle
+ * @retval None
+ */
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec)
+{
+
+ /* save interrupts register for further error or interrupts handling purposes */
+ uint32_t reg = 0U;
+ reg = hcec->Instance->ISR;
+
+
+ /* ----------------------------Arbitration Lost Management----------------------------------*/
+ /* CEC TX arbitration error interrupt occurred --------------------------------------*/
+ if((reg & CEC_FLAG_ARBLST) != RESET)
+ {
+ hcec->ErrorCode = HAL_CEC_ERROR_ARBLST;
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST);
+ }
+
+ /* ----------------------------Rx Management----------------------------------*/
+ /* CEC RX byte received interrupt ---------------------------------------------------*/
+ if((reg & CEC_FLAG_RXBR) != RESET)
+ {
+ /* reception is starting */
+ hcec->RxState = HAL_CEC_STATE_BUSY_RX;
+ hcec->RxXferSize++;
+ /* read received byte */
+ *hcec->Init.RxBuffer++ = hcec->Instance->RXDR;
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR);
+ }
+
+ /* CEC RX end received interrupt ---------------------------------------------------*/
+ if((reg & CEC_FLAG_RXEND) != RESET)
+ {
+ /* clear IT */
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND);
+
+ /* Rx process is completed, restore hcec->RxState to Ready */
+ hcec->RxState = HAL_CEC_STATE_READY;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ hcec->Init.RxBuffer -= hcec->RxXferSize;
+ HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize);
+ hcec->RxXferSize = 0U;
+ }
+
+ /* ----------------------------Tx Management----------------------------------*/
+ /* CEC TX byte request interrupt ------------------------------------------------*/
+ if((reg & CEC_FLAG_TXBR) != RESET)
+ {
+ if (hcec->TxXferCount == 0U)
+ {
+ /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
+ __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+ hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+ }
+ else
+ {
+ hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+ hcec->TxXferCount--;
+ }
+ /* clear Tx-Byte request flag */
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXBR);
+ }
+
+ /* CEC TX end interrupt ------------------------------------------------*/
+ if((reg & CEC_FLAG_TXEND) != RESET)
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND);
+
+ /* Tx process is ended, restore hcec->gState to Ready */
+ hcec->gState = HAL_CEC_STATE_READY;
+ /* Call the Process Unlocked before calling the Tx call back API to give the possibility to
+ start again the Transmission under the Tx call back API */
+ __HAL_UNLOCK(hcec);
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ HAL_CEC_TxCpltCallback(hcec);
+ }
+
+ /* ----------------------------Rx/Tx Error Management----------------------------------*/
+ if ((reg & (CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)) != 0U)
+ {
+ hcec->ErrorCode = reg;
+ __HAL_CEC_CLEAR_FLAG(hcec, HAL_CEC_ERROR_RXOVR|HAL_CEC_ERROR_BRE|CEC_FLAG_LBPE|CEC_FLAG_SBPE|HAL_CEC_ERROR_RXACKE|HAL_CEC_ERROR_TXUDR|HAL_CEC_ERROR_TXERR|HAL_CEC_ERROR_TXACKE);
+
+
+ if((reg & (CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE)) != RESET)
+ {
+ hcec->Init.RxBuffer-=hcec->RxXferSize;
+ hcec->RxXferSize = 0U;
+ hcec->RxState = HAL_CEC_STATE_READY;
+ }
+ else if (((reg & (CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)) != RESET) && ((reg & CEC_ISR_ARBLST) == RESET))
+ {
+ /* Set the CEC state ready to be able to start again the process */
+ hcec->gState = HAL_CEC_STATE_READY;
+ }
+
+ /* Error Call Back */
+ HAL_CEC_ErrorCallback(hcec);
+ }
+
+}
+
+/**
+ * @brief Tx Transfer completed callback
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback
+ * @param hcec: CEC handle
+ * @param RxFrameSize: Size of frame
+ * @retval None
+ */
+__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ UNUSED(RxFrameSize);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_RxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief CEC error callbacks
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_ErrorCallback can be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function
+ * @brief CEC control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control function #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CEC.
+ (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral.
+ (+) HAL_CEC_GetError() API can be helpful to check in run-time the error of the CEC peripheral.
+@endverbatim
+ * @{
+ */
+/**
+ * @brief return the CEC state
+ * @param hcec: pointer to a CEC_HandleTypeDef structure that contains
+ * the configuration information for the specified CEC module.
+ * @retval HAL state
+ */
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec)
+{
+ uint32_t temp1 = 0x00U, temp2 = 0x00U;
+ temp1 = hcec->gState;
+ temp2 = hcec->RxState;
+
+ return (HAL_CEC_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+ * @brief Return the CEC error code
+ * @param hcec : pointer to a CEC_HandleTypeDef structure that contains
+ * the configuration information for the specified CEC.
+ * @retval CEC Error Code
+ */
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec)
+{
+ return hcec->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F446xx */
+
+#endif /* HAL_CEC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,747 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cec.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of CEC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CEC_H
+#define __STM32F4xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CEC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+ * @{
+ */
+
+/**
+ * @brief CEC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time.
+ It can be one of @ref CEC_Signal_Free_Time
+ and belongs to the set {0,...,7} where
+ 0x0 is the default configuration
+ else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+ uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+ it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+ or CEC_EXTENDED_TOLERANCE */
+
+ uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+ CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+ CEC_RX_STOP_ON_BRE: reception is stopped. */
+
+ uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Bit Rising Error detection.
+ CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
+
+ uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Long Bit Period Error detection.
+ CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
+
+ uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+ upon an error detected on a broadcast message.
+
+ It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+ 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+ a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+ and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+ b) LBPE detection: error-bit generation on the CEC line
+ if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+ 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+ no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+ there is no error-bit generation in case of Short Bit Period Error detection in
+ a broadcast message while LSTN bit is set. */
+
+ uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+ CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
+ CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
+
+ uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+ CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+ own address (OAR). Messages addressed to different destination are ignored.
+ Broadcast messages are always received.
+
+ CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+ address (OAR) with positive acknowledge. Messages addressed to different destination
+ are received, but without interfering with the CEC bus: no acknowledge sent. */
+
+ uint16_t OwnAddress; /*!< Own addresses configuration
+ This parameter can be a value of @ref CEC_OWN_ADDRESS */
+
+ uint8_t *RxBuffer; /*!< CEC Rx buffer pointeur */
+
+
+}CEC_InitTypeDef;
+
+/**
+ * @brief HAL CEC State structures definition
+ * @note HAL CEC State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains CEC state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7 (not used)
+ * x : Should be set to 0
+ * b6 Error information
+ * 0 : No Error
+ * 1 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized. HAL CEC Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_CEC_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+ HAL_CEC_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_CEC_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_CEC_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_CEC_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_CEC_STATE_ERROR = 0x60U /*!< Error Value is allowed for gState only */
+}HAL_CEC_StateTypeDef;
+
+/**
+ * @brief CEC handle Structure definition
+ */
+typedef struct
+{
+ CEC_TypeDef *Instance; /*!< CEC registers base address */
+
+ CEC_InitTypeDef Init; /*!< CEC communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */
+
+ uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */
+
+ uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+
+ HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations.
+ This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+
+ uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register
+ in case error is reported */
+}CEC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+ * @{
+ */
+
+/** @defgroup CEC_Error_Code CEC Error Code
+ * @{
+ */
+#define HAL_CEC_ERROR_NONE ((uint32_t)0x00000000U)/*!< no error */
+#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */
+#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */
+#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */
+#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */
+#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */
+#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */
+#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */
+#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */
+#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter
+ * @{
+ */
+#define CEC_DEFAULT_SFT ((uint32_t)0x00000000U)
+#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001U)
+#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002U)
+#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003U)
+#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004U)
+#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005U)
+#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006U)
+#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007U)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Tolerance CEC Receiver Tolerance
+ * @{
+ */
+#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000U)
+#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BRERxStop CEC Reception Stop on Error
+ * @{
+ */
+#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000U)
+#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported
+ * @{
+ */
+#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U)
+#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported
+ * @{
+ */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U)
+#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message
+ * @{
+ */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000U)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_SFT_Option CEC Signal Free Time start option
+ * @{
+ */
+#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000U)
+#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Listening_Mode CEC Listening mode option
+ * @{
+ */
+#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000U)
+#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register
+ * @{
+ */
+#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16U)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header
+ * @{
+ */
+#define CEC_INITIATOR_LSB_POS ((uint32_t) 4U)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OWN_ADDRESS CEC Own Address
+ * @{
+ */
+#define CEC_OWN_ADDRESS_NONE ((uint16_t) 0x0000U) /* Reset value */
+#define CEC_OWN_ADDRESS_0 ((uint16_t) 0x0001U) /* Logical Address 0 */
+#define CEC_OWN_ADDRESS_1 ((uint16_t) 0x0002U) /* Logical Address 1 */
+#define CEC_OWN_ADDRESS_2 ((uint16_t) 0x0004U) /* Logical Address 2 */
+#define CEC_OWN_ADDRESS_3 ((uint16_t) 0x0008U) /* Logical Address 3 */
+#define CEC_OWN_ADDRESS_4 ((uint16_t) 0x0010U) /* Logical Address 4 */
+#define CEC_OWN_ADDRESS_5 ((uint16_t) 0x0020U) /* Logical Address 5 */
+#define CEC_OWN_ADDRESS_6 ((uint16_t) 0x0040U) /* Logical Address 6 */
+#define CEC_OWN_ADDRESS_7 ((uint16_t) 0x0080U) /* Logical Address 7 */
+#define CEC_OWN_ADDRESS_8 ((uint16_t) 0x0100U) /* Logical Address 9 */
+#define CEC_OWN_ADDRESS_9 ((uint16_t) 0x0200U) /* Logical Address 10 */
+#define CEC_OWN_ADDRESS_10 ((uint16_t) 0x0400U) /* Logical Address 11 */
+#define CEC_OWN_ADDRESS_11 ((uint16_t) 0x0800U) /* Logical Address 12 */
+#define CEC_OWN_ADDRESS_12 ((uint16_t) 0x1000U) /* Logical Address 13 */
+#define CEC_OWN_ADDRESS_13 ((uint16_t) 0x2000U) /* Logical Address 14 */
+#define CEC_OWN_ADDRESS_14 ((uint16_t) 0x4000U) /* Logical Address 15 */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition
+ * @{
+ */
+#define CEC_IT_TXACKE CEC_IER_TXACKEIE
+#define CEC_IT_TXERR CEC_IER_TXERRIE
+#define CEC_IT_TXUDR CEC_IER_TXUDRIE
+#define CEC_IT_TXEND CEC_IER_TXENDIE
+#define CEC_IT_TXBR CEC_IER_TXBRIE
+#define CEC_IT_ARBLST CEC_IER_ARBLSTIE
+#define CEC_IT_RXACKE CEC_IER_RXACKEIE
+#define CEC_IT_LBPE CEC_IER_LBPEIE
+#define CEC_IT_SBPE CEC_IER_SBPEIE
+#define CEC_IT_BRE CEC_IER_BREIE
+#define CEC_IT_RXOVR CEC_IER_RXOVRIE
+#define CEC_IT_RXEND CEC_IER_RXENDIE
+#define CEC_IT_RXBR CEC_IER_RXBRIE
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Flags_Definitions CEC Flags definition
+ * @{
+ */
+#define CEC_FLAG_TXACKE CEC_ISR_TXACKE
+#define CEC_FLAG_TXERR CEC_ISR_TXERR
+#define CEC_FLAG_TXUDR CEC_ISR_TXUDR
+#define CEC_FLAG_TXEND CEC_ISR_TXEND
+#define CEC_FLAG_TXBR CEC_ISR_TXBR
+#define CEC_FLAG_ARBLST CEC_ISR_ARBLST
+#define CEC_FLAG_RXACKE CEC_ISR_RXACKE
+#define CEC_FLAG_LBPE CEC_ISR_LBPE
+#define CEC_FLAG_SBPE CEC_ISR_SBPE
+#define CEC_FLAG_BRE CEC_ISR_BRE
+#define CEC_FLAG_RXOVR CEC_ISR_RXOVR
+#define CEC_FLAG_RXEND CEC_ISR_RXEND
+#define CEC_FLAG_RXBR CEC_ISR_RXBR
+/**
+ * @}
+ */
+
+/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags
+ * @{
+ */
+#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+ CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CEC handle gstate & RxState
+ * @param __HANDLE__: CEC handle.
+ * @retval None
+ */
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \
+ } while(0)
+
+/** @brief Checks whether or not the specified CEC interrupt flag is set.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+ * @arg CEC_FLAG_TXERR: Tx Error.
+ * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+ * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+ * @arg CEC_FLAG_TXBR: Tx-Byte Request.
+ * @arg CEC_FLAG_ARBLST: Arbitration Lost
+ * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+ * @arg CEC_FLAG_LBPE: Rx Long period Error
+ * @arg CEC_FLAG_SBPE: Rx Short period Error
+ * @arg CEC_FLAG_BRE: Rx Bit Rising Error
+ * @arg CEC_FLAG_RXOVR: Rx Overrun.
+ * @arg CEC_FLAG_RXEND: End Of Reception.
+ * @arg CEC_FLAG_RXBR: Rx-Byte Received.
+ * @retval ITStatus
+ */
+#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/** @brief Clears the interrupt or status flag when raised (write at 1)
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the interrupt/status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+ * @arg CEC_FLAG_TXERR: Tx Error.
+ * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+ * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+ * @arg CEC_FLAG_TXBR: Tx-Byte Request.
+ * @arg CEC_FLAG_ARBLST: Arbitration Lost
+ * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+ * @arg CEC_FLAG_LBPE: Rx Long period Error
+ * @arg CEC_FLAG_SBPE: Rx Short period Error
+ * @arg CEC_FLAG_BRE: Rx Bit Rising Error
+ * @arg CEC_FLAG_RXOVR: Rx Overrun.
+ * @arg CEC_FLAG_RXEND: End Of Reception.
+ * @arg CEC_FLAG_RXBR: Rx-Byte Received.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__))
+
+/** @brief Enables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief Disables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Checks whether or not the specified CEC interrupt is enabled.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief Enables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN)
+
+/** @brief Disables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
+
+/** @brief Set Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM)
+
+/** @brief Set Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+ */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM)
+
+/** @brief Get Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief Get Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief Clear OAR register
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
+ * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position)
+ * @retval none
+ */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress,uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CEC_Private_Types CEC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Variables CEC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Macros CEC Private Macros
+ * @{
+ */
+
+#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT)
+
+#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \
+ ((__RXTOL__) == CEC_EXTENDED_TOLERANCE))
+
+#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \
+ ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE))
+
+#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION))
+
+#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION))
+
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+
+#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \
+ ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END))
+
+#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \
+ ((__MODE__) == CEC_FULL_LISTENING_MODE))
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__: CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10)
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * OAR address is written in a 15-bit field within CEC_CFGR register.
+ * @param __ADDRESS__: CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFFU)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__: CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0FU)
+/**
+ * @}
+ */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_conf_template.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_conf_template.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,454 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf_template.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32f4xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_DSI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_FMPI2C_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 1U
+#define INSTRUCTION_CACHE_ENABLE 1U
+#define DATA_CACHE_ENABLE 1U
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2U
+#define MAC_ADDR1 0U
+#define MAC_ADDR2 0U
+#define MAC_ADDR3 0U
+#define MAC_ADDR4 0U
+#define MAC_ADDR5 0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS 0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x0010U) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x0011U) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x0012U) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001U) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002U) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001U) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020U) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000U) /*!< PHY link status interrupt mask */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,483 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cortex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief CORTEX HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the CORTEX:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+
+ [..]
+ *** How to configure Interrupts using CORTEX HAL driver ***
+ ===========================================================
+ [..]
+ This section provides functions allowing to configure the NVIC interrupts (IRQ).
+ The Cortex-M4 exceptions are managed by CMSIS functions.
+
+ (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
+ function according to the following table.
+ (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
+ (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
+ (#) please refer to programing manual for details in how to configure priority.
+
+ -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible.
+ The pending IRQ priority will be managed only by the sub priority.
+
+ -@- IRQ priority order (sorted by highest to lowest priority):
+ (+@) Lowest preemption priority
+ (+@) Lowest sub priority
+ (+@) Lowest hardware priority (IRQ number)
+
+ [..]
+ *** How to configure Systick using CORTEX HAL driver ***
+ ========================================================
+ [..]
+ Setup SysTick Timer for time base.
+
+ (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
+ is a CMSIS function that:
+ (++) Configures the SysTick Reload register with value passed as function parameter.
+ (++) Configures the SysTick IRQ priority to the lowest value (0x0FU).
+ (++) Resets the SysTick Counter register.
+ (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+ (++) Enables the SysTick Interrupt.
+ (++) Starts the SysTick Counter.
+
+ (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+ __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+ HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+ inside the stm32f4xx_hal_cortex.h file.
+
+ (+) You can change the SysTick IRQ priority by calling the
+ HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
+ call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+ (+) To adjust the SysTick time base, use the following formula:
+
+ Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
+ (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+ (++) Reload Value should not exceed 0xFFFFFF
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CORTEX CORTEX
+ * @brief CORTEX HAL module driver
+ * @{
+ */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+ Systick functionalities
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Sets the priority grouping field (preemption priority and subpriority)
+ * using the required unlock sequence.
+ * @param PriorityGroup: The priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+ * 0 bits for subpriority
+ * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible.
+ * The pending IRQ priority will be managed only by the subpriority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+ NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+ * @brief Sets the priority of an interrupt.
+ * @param IRQn: External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+ * @param PreemptPriority: The preemption priority for the IRQn channel.
+ * This parameter can be a value between 0 and 15
+ * A lower priority value indicates a higher priority
+ * @param SubPriority: the subpriority level for the IRQ channel.
+ * This parameter can be a value between 0 and 15
+ * A lower priority value indicates a higher priority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t prioritygroup = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+
+ prioritygroup = NVIC_GetPriorityGrouping();
+
+ NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+ * @brief Enables a device specific interrupt in the NVIC interrupt controller.
+ * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+ * function should be called before.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Enable interrupt */
+ NVIC_EnableIRQ(IRQn);
+}
+
+/**
+ * @brief Disables a device specific interrupt in the NVIC interrupt controller.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Disable interrupt */
+ NVIC_DisableIRQ(IRQn);
+}
+
+/**
+ * @brief Initiates a system reset request to reset the MCU.
+ * @retval None
+ */
+void HAL_NVIC_SystemReset(void)
+{
+ /* System Reset */
+ NVIC_SystemReset();
+}
+
+/**
+ * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ * Counter is in free running mode to generate periodic interrupts.
+ * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts.
+ * @retval status: - 0 Function succeeded.
+ * - 1 Function failed.
+ */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+ return SysTick_Config(TicksNumb);
+}
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CORTEX
+ (NVIC, SYSTICK, MPU) functionalities.
+
+
+@endverbatim
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1U)
+/**
+ * @brief Initializes and configures the Region and the memory to be protected.
+ * @param MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains
+ * the initialization and configuration information.
+ * @retval None
+ */
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
+{
+ /* Check the parameters */
+ assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
+ assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+
+ /* Set the Region number */
+ MPU->RNR = MPU_Init->Number;
+
+ if ((MPU_Init->Enable) != RESET)
+ {
+ /* Check the parameters */
+ assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+ assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+ assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+ assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+ assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+ assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+ assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+ assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+
+ MPU->RBAR = MPU_Init->BaseAddress;
+ MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
+ ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
+ ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
+ ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
+ ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
+ ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
+ ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
+ ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
+ ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
+ }
+ else
+ {
+ MPU->RBAR = 0x00U;
+ MPU->RASR = 0x00U;
+ }
+}
+#endif /* __MPU_PRESENT */
+
+/**
+ * @brief Gets the priority grouping field from the NVIC Interrupt Controller.
+ * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+ */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+ /* Get the PRIGROUP[10:8] field value */
+ return NVIC_GetPriorityGrouping();
+}
+
+/**
+ * @brief Gets the priority of an interrupt.
+ * @param IRQn: External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+ * @param PriorityGroup: the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+ * 0 bits for subpriority
+ * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0).
+ * @param pSubPriority: Pointer on the Subpriority value (starting from 0).
+ * @retval None
+ */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+ /* Get priority for Cortex-M system or device specific interrupts */
+ NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+ * @brief Sets Pending bit of an external interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Set interrupt pending */
+ NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets Pending Interrupt (reads the pending register in the NVIC
+ * and returns the pending bit for the specified interrupt).
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Return 1 if pending else 0 */
+ return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Clears the pending bit of an external interrupt.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Clear pending interrupt */
+ NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Return 1 if active else 0 */
+ return NVIC_GetActive(IRQn);
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param CLKSource: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+ if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+ {
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+ }
+}
+
+/**
+ * @brief This function handles SYSTICK interrupt request.
+ * @retval None
+ */
+void HAL_SYSTICK_IRQHandler(void)
+{
+ HAL_SYSTICK_Callback();
+}
+
+/**
+ * @brief SYSTICK callback.
+ * @retval None
+ */
+__weak void HAL_SYSTICK_Callback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SYSTICK_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,467 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cortex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CORTEX_H
+#define __STM32F4xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types Cortex Exported Types
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+ * @brief MPU Region initialization structure
+ * @{
+ */
+typedef struct
+{
+ uint8_t Enable; /*!< Specifies the status of the region.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
+ uint8_t Number; /*!< Specifies the number of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Number */
+ uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
+ uint8_t Size; /*!< Specifies the size of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Size */
+ uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint8_t TypeExtField; /*!< Specifies the TEX field level.
+ This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
+ uint8_t AccessPermission; /*!< Specifies the region access permission type.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
+ uint8_t DisableExec; /*!< Specifies the instruction access status.
+ This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
+ uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
+ uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
+ uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
+}MPU_Region_InitTypeDef;
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+ * @{
+ */
+#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007U) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006U) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005U) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004U) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003U) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000U)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004U)
+
+/**
+ * @}
+ */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+ * @{
+ */
+#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000U)
+#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002U)
+#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004U)
+#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+ * @{
+ */
+#define MPU_REGION_ENABLE ((uint8_t)0x01U)
+#define MPU_REGION_DISABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+ * @{
+ */
+#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00U)
+#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+ * @{
+ */
+#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+ * @{
+ */
+#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+ * @{
+ */
+#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+ * @{
+ */
+#define MPU_TEX_LEVEL0 ((uint8_t)0x00U)
+#define MPU_TEX_LEVEL1 ((uint8_t)0x01U)
+#define MPU_TEX_LEVEL2 ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+ * @{
+ */
+#define MPU_REGION_SIZE_32B ((uint8_t)0x04U)
+#define MPU_REGION_SIZE_64B ((uint8_t)0x05U)
+#define MPU_REGION_SIZE_128B ((uint8_t)0x06U)
+#define MPU_REGION_SIZE_256B ((uint8_t)0x07U)
+#define MPU_REGION_SIZE_512B ((uint8_t)0x08U)
+#define MPU_REGION_SIZE_1KB ((uint8_t)0x09U)
+#define MPU_REGION_SIZE_2KB ((uint8_t)0x0AU)
+#define MPU_REGION_SIZE_4KB ((uint8_t)0x0BU)
+#define MPU_REGION_SIZE_8KB ((uint8_t)0x0CU)
+#define MPU_REGION_SIZE_16KB ((uint8_t)0x0DU)
+#define MPU_REGION_SIZE_32KB ((uint8_t)0x0EU)
+#define MPU_REGION_SIZE_64KB ((uint8_t)0x0FU)
+#define MPU_REGION_SIZE_128KB ((uint8_t)0x10U)
+#define MPU_REGION_SIZE_256KB ((uint8_t)0x11U)
+#define MPU_REGION_SIZE_512KB ((uint8_t)0x12U)
+#define MPU_REGION_SIZE_1MB ((uint8_t)0x13U)
+#define MPU_REGION_SIZE_2MB ((uint8_t)0x14U)
+#define MPU_REGION_SIZE_4MB ((uint8_t)0x15U)
+#define MPU_REGION_SIZE_8MB ((uint8_t)0x16U)
+#define MPU_REGION_SIZE_16MB ((uint8_t)0x17U)
+#define MPU_REGION_SIZE_32MB ((uint8_t)0x18U)
+#define MPU_REGION_SIZE_64MB ((uint8_t)0x19U)
+#define MPU_REGION_SIZE_128MB ((uint8_t)0x1AU)
+#define MPU_REGION_SIZE_256MB ((uint8_t)0x1BU)
+#define MPU_REGION_SIZE_512MB ((uint8_t)0x1CU)
+#define MPU_REGION_SIZE_1GB ((uint8_t)0x1DU)
+#define MPU_REGION_SIZE_2GB ((uint8_t)0x1EU)
+#define MPU_REGION_SIZE_4GB ((uint8_t)0x1FU)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
+ * @{
+ */
+#define MPU_REGION_NO_ACCESS ((uint8_t)0x00U)
+#define MPU_REGION_PRIV_RW ((uint8_t)0x01U)
+#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02U)
+#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03U)
+#define MPU_REGION_PRIV_RO ((uint8_t)0x05U)
+#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+ * @{
+ */
+#define MPU_REGION_NUMBER0 ((uint8_t)0x00U)
+#define MPU_REGION_NUMBER1 ((uint8_t)0x01U)
+#define MPU_REGION_NUMBER2 ((uint8_t)0x02U)
+#define MPU_REGION_NUMBER3 ((uint8_t)0x03U)
+#define MPU_REGION_NUMBER4 ((uint8_t)0x04U)
+#define MPU_REGION_NUMBER5 ((uint8_t)0x05U)
+#define MPU_REGION_NUMBER6 ((uint8_t)0x06U)
+#define MPU_REGION_NUMBER7 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+#if (__MPU_PRESENT == 1)
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+ * @{
+ */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+
+#if (__MPU_PRESENT == 1U)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+ ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+ ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
+ ((TYPE) == MPU_TEX_LEVEL1) || \
+ ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RW) || \
+ ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+ ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RO) || \
+ ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
+ ((NUMBER) == MPU_REGION_NUMBER1) || \
+ ((NUMBER) == MPU_REGION_NUMBER2) || \
+ ((NUMBER) == MPU_REGION_NUMBER3) || \
+ ((NUMBER) == MPU_REGION_NUMBER4) || \
+ ((NUMBER) == MPU_REGION_NUMBER5) || \
+ ((NUMBER) == MPU_REGION_NUMBER6) || \
+ ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
+ ((SIZE) == MPU_REGION_SIZE_64B) || \
+ ((SIZE) == MPU_REGION_SIZE_128B) || \
+ ((SIZE) == MPU_REGION_SIZE_256B) || \
+ ((SIZE) == MPU_REGION_SIZE_512B) || \
+ ((SIZE) == MPU_REGION_SIZE_1KB) || \
+ ((SIZE) == MPU_REGION_SIZE_2KB) || \
+ ((SIZE) == MPU_REGION_SIZE_4KB) || \
+ ((SIZE) == MPU_REGION_SIZE_8KB) || \
+ ((SIZE) == MPU_REGION_SIZE_16KB) || \
+ ((SIZE) == MPU_REGION_SIZE_32KB) || \
+ ((SIZE) == MPU_REGION_SIZE_64KB) || \
+ ((SIZE) == MPU_REGION_SIZE_128KB) || \
+ ((SIZE) == MPU_REGION_SIZE_256KB) || \
+ ((SIZE) == MPU_REGION_SIZE_512KB) || \
+ ((SIZE) == MPU_REGION_SIZE_1MB) || \
+ ((SIZE) == MPU_REGION_SIZE_2MB) || \
+ ((SIZE) == MPU_REGION_SIZE_4MB) || \
+ ((SIZE) == MPU_REGION_SIZE_8MB) || \
+ ((SIZE) == MPU_REGION_SIZE_16MB) || \
+ ((SIZE) == MPU_REGION_SIZE_32MB) || \
+ ((SIZE) == MPU_REGION_SIZE_64MB) || \
+ ((SIZE) == MPU_REGION_SIZE_128MB) || \
+ ((SIZE) == MPU_REGION_SIZE_256MB) || \
+ ((SIZE) == MPU_REGION_SIZE_512MB) || \
+ ((SIZE) == MPU_REGION_SIZE_1GB) || \
+ ((SIZE) == MPU_REGION_SIZE_2GB) || \
+ ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU)
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Functions CORTEX Private Functions
+ * @brief CORTEX private functions
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1)
+/**
+ * @brief Disables the MPU
+ * @retval None
+ */
+__STATIC_INLINE void HAL_MPU_Disable(void)
+{
+ /* Disable fault exceptions */
+ SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+
+ /* Disable the MPU */
+ MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+/**
+ * @brief Enables the MPU
+ * @param MPU_Control: Specifies the control mode of the MPU during hard fault,
+ * NMI, FAULTMASK and privileged access to the default memory
+ * This parameter can be one of the following values:
+ * @arg MPU_HFNMI_PRIVDEF_NONE
+ * @arg MPU_HARDFAULT_NMI
+ * @arg MPU_PRIVILEGED_DEFAULT
+ * @arg MPU_HFNMI_PRIVDEF
+ * @retval None
+ */
+__STATIC_INLINE void HAL_MPU_Enable(uint32_t MPU_Control)
+{
+ /* Enable the MPU */
+ MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+
+ /* Enable fault exceptions */
+ SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+}
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,346 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_crc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief CRC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Cyclic Redundancy Check (CRC) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The CRC HAL driver can be used as follows:
+
+ (#) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE();
+
+ (#) Use HAL_CRC_Accumulate() function to compute the CRC value of
+ a 32-bit data buffer using combination of the previous CRC value
+ and the new one.
+
+ (#) Use HAL_CRC_Calculate() function to compute the CRC Value of
+ a new 32-bit data buffer. This function resets the CRC computation
+ unit before starting the computation to avoid getting wrong CRC values.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRC
+ * @{
+ */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup CRC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the CRC according to the specified parameters
+ in the CRC_InitTypeDef and create the associated handle
+ (+) DeInitialize the CRC peripheral
+ (+) Initialize the CRC MSP
+ (+) DeInitialize CRC MSP
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRC according to the specified
+ * parameters in the CRC_InitTypeDef and creates the associated handle.
+ * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
+ * the configuration information for CRC
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)
+{
+ /* Check the CRC handle allocation */
+ if(hcrc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
+
+ if(hcrc->State == HAL_CRC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hcrc->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_CRC_MspInit(hcrc);
+ }
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the CRC peripheral.
+ * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
+ * the configuration information for CRC
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)
+{
+ /* Check the CRC handle allocation */
+ if(hcrc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_CRC_MspDeInit(hcrc);
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRC MSP.
+ * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
+ * the configuration information for CRC
+ * @retval None
+ */
+__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcrc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the CRC MSP.
+ * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
+ * the configuration information for CRC
+ * @retval None
+ */
+__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcrc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group2
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Compute the 32-bit CRC value of 32-bit data buffer,
+ using combination of the previous CRC value and the new one.
+ (+) Compute the 32-bit CRC value of 32-bit data buffer,
+ independently of the previous CRC value.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Computes the 32-bit CRC of 32-bit data buffer using combination
+ * of the previous CRC value and the new one.
+ * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
+ * the configuration information for CRC
+ * @param pBuffer: pointer to the buffer containing the data to be computed
+ * @param BufferLength: length of the buffer to be computed
+ * @retval 32-bit CRC
+ */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
+{
+ uint32_t index = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hcrc);
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ /* Enter Data to the CRC calculator */
+ for(index = 0U; index < BufferLength; index++)
+ {
+ hcrc->Instance->DR = pBuffer[index];
+ }
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcrc);
+
+ /* Return the CRC computed value */
+ return hcrc->Instance->DR;
+}
+
+/**
+ * @brief Computes the 32-bit CRC of 32-bit data buffer independently
+ * of the previous CRC value.
+ * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
+ * the configuration information for CRC
+ * @param pBuffer: Pointer to the buffer containing the data to be computed
+ * @param BufferLength: Length of the buffer to be computed
+ * @retval 32-bit CRC
+ */
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
+{
+ uint32_t index = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hcrc);
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_BUSY;
+
+ /* Reset CRC Calculation Unit */
+ __HAL_CRC_DR_RESET(hcrc);
+
+ /* Enter Data to the CRC calculator */
+ for(index = 0U; index < BufferLength; index++)
+ {
+ hcrc->Instance->DR = pBuffer[index];
+ }
+
+ /* Change CRC peripheral state */
+ hcrc->State = HAL_CRC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcrc);
+
+ /* Return the CRC computed value */
+ return hcrc->Instance->DR;
+}
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup CRC_Exported_Functions_Group3
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the CRC state.
+ * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
+ * the configuration information for CRC
+ * @retval HAL state
+ */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)
+{
+ return hcrc->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_CRC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,249 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_crc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of CRC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRC_H
+#define __STM32F4xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CRC CRC
+ * @brief CRC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+ * @{
+ */
+
+/** @defgroup CRC_Exported_Types_Group1 CRC State Structure definition
+ * @{
+ */
+typedef enum
+{
+ HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */
+ HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */
+ HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */
+ HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */
+ HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */
+
+}HAL_CRC_StateTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Types_Group2 CRC Handle Structure definition
+ * @{
+ */
+typedef struct
+{
+ CRC_TypeDef *Instance; /*!< Register base address */
+
+ HAL_LockTypeDef Lock; /*!< CRC locking object */
+
+ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
+
+}CRC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Macros CRC Exported Macros
+ * @{
+ */
+
+/** @brief Resets CRC handle state
+ * @param __HANDLE__: CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+ * @brief Resets CRC Data Register.
+ * @param __HANDLE__: CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+ * @brief Stores a 8-bit data in the Independent Data(ID) register.
+ * @param __HANDLE__: CRC handle
+ * @param __VALUE__: 8-bit value to be stored in the ID register
+ * @retval None
+ */
+#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__)))
+
+/**
+ * @brief Returns the 8-bit data stored in the Independent Data(ID) register.
+ * @param __HANDLE__: CRC handle
+ * @retval 8-bit value of the ID register
+ */
+#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Functions CRC Exported Functions
+ * @{
+ */
+
+/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CRC_Private_Types CRC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup CRC_Private_Defines CRC Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Variables CRC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Constants CRC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRC_Private_Macros CRC Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup CRC_Private_Functions_Prototypes CRC Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Functions CRC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,3823 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief CRYP HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Cryptography (CRYP) peripheral:
+ * + Initialization and de-initialization functions
+ * + AES processing functions
+ * + DES processing functions
+ * + TDES processing functions
+ * + DMA callback functions
+ * + CRYP IRQ handler management
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The CRYP HAL driver can be used as follows:
+
+ (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
+ (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
+ (##) In case of using interrupts (e.g. HAL_CRYP_AESECB_Encrypt_IT())
+ (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
+ (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_AESECB_Encrypt_DMA())
+ (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+ (+++) Configure and enable two DMA streams one for managing data transfer from
+ memory to peripheral (input stream) and another stream for managing data
+ transfer from peripheral to memory (output stream)
+ (+++) Associate the initialized DMA handle to the CRYP DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the two DMA Streams. The output stream should have higher
+ priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+
+ (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
+ (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
+ (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
+ (##) The encryption/decryption key. It's size depends on the algorithm
+ used for encryption/decryption
+ (##) The initialization vector (counter). It is not used ECB mode.
+
+ (#)Three processing (encryption/decryption) functions are available:
+ (##) Polling mode: encryption and decryption APIs are blocking functions
+ i.e. they process the data and wait till the processing is finished,
+ e.g. HAL_CRYP_AESCBC_Encrypt()
+ (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+ i.e. they process the data under interrupt,
+ e.g. HAL_CRYP_AESCBC_Encrypt_IT()
+ (##) DMA mode: encryption and decryption APIs are not blocking functions
+ i.e. the data transfer is ensured by DMA,
+ e.g. HAL_CRYP_AESCBC_Encrypt_DMA()
+
+ (#)When the processing function is called at first time after HAL_CRYP_Init()
+ the CRYP peripheral is initialized and processes the buffer in input.
+ At second call, the processing function performs an append of the already
+ processed buffer.
+ When a new data block is to be processed, call HAL_CRYP_Init() then the
+ processing function.
+
+ (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CRYP CRYP
+ * @brief CRYP HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CRYP_Private_define
+ * @{
+ */
+#define CRYP_TIMEOUT_VALUE 1U
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup CRYP_Private_Functions_prototypes
+ * @{
+ */
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize);
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma);
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+/**
+ * @}
+ */
+
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup CRYP_Private_Functions
+ * @{
+ */
+
+
+/**
+ * @brief DMA CRYP Input Data process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma)
+{
+ CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable the DMA transfer for input FIFO request by resetting the DIEN bit
+ in the DMACR register */
+ hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
+
+ /* Call input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+}
+
+/**
+ * @brief DMA CRYP Output Data process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma)
+{
+ CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable the DMA transfer for output FIFO request by resetting the DOEN bit
+ in the DMACR register */
+ hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
+
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Change the CRYP state to ready */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Call output data transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+}
+
+/**
+ * @brief DMA CRYP communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma)
+{
+ CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+ hcryp->State= HAL_CRYP_STATE_READY;
+ HAL_CRYP_ErrorCallback(hcryp);
+}
+
+/**
+ * @brief Writes the Key in Key registers.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Key: Pointer to Key buffer
+ * @param KeySize: Size of Key
+ * @retval None
+ */
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
+{
+ uint32_t keyaddr = (uint32_t)Key;
+
+ switch(KeySize)
+ {
+ case CRYP_KEYSIZE_256B:
+ /* Key Initialisation */
+ hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+ break;
+ case CRYP_KEYSIZE_192B:
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+ break;
+ case CRYP_KEYSIZE_128B:
+ hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Writes the InitVector/InitCounter in IV registers.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param InitVector: Pointer to InitVector/InitCounter buffer
+ * @param IVSize: Size of the InitVector/InitCounter
+ * @retval None
+ */
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize)
+{
+ uint32_t ivaddr = (uint32_t)InitVector;
+
+ switch(IVSize)
+ {
+ case CRYP_KEYSIZE_128B:
+ hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
+ break;
+ /* Whatever key size 192 or 256, Init vector is written in IV0LR and IV0RR */
+ case CRYP_KEYSIZE_192B:
+ hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+ break;
+ case CRYP_KEYSIZE_256B:
+ hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Process Data: Writes Input data in polling mode and read the output data
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Input: Pointer to the Input buffer
+ * @param Ilength: Length of the Input buffer, must be a multiple of 16.
+ * @param Output: Pointer to the returned buffer
+ * @param Timeout: Timeout value
+ * @retval None
+ */
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ uint32_t i = 0U;
+ uint32_t inputaddr = (uint32_t)Input;
+ uint32_t outputaddr = (uint32_t)Output;
+
+ for(i=0U; (i < Ilength); i+=16U)
+ {
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Process Data: Write Input data in polling mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Input: Pointer to the Input buffer
+ * @param Ilength: Length of the Input buffer, must be a multiple of 8
+ * @param Output: Pointer to the returned buffer
+ * @param Timeout: Specify Timeout value
+ * @retval None
+ */
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ uint32_t i = 0U;
+ uint32_t inputaddr = (uint32_t)Input;
+ uint32_t outputaddr = (uint32_t)Output;
+
+ for(i=0U; (i < Ilength); i+=8U)
+ {
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the DMA configuration and start the DMA transfer
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param inputaddr: address of the Input buffer
+ * @param Size: Size of the Input buffer, must be a multiple of 16.
+ * @param outputaddr: address of the Output buffer
+ * @retval None
+ */
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
+{
+ /* Set the CRYP DMA transfer complete callback */
+ hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt;
+ /* Set the DMA error callback */
+ hcryp->hdmain->XferErrorCallback = CRYP_DMAError;
+
+ /* Set the CRYP DMA transfer complete callback */
+ hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt;
+ /* Set the DMA error callback */
+ hcryp->hdmaout->XferErrorCallback = CRYP_DMAError;
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4U);
+
+ /* Enable In DMA request */
+ hcryp->Instance->DMACR = (CRYP_DMACR_DIEN);
+
+ /* Enable the DMA Out DMA Stream */
+ HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4U);
+
+ /* Enable Out DMA request */
+ hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
+
+}
+
+/**
+ * @brief Sets the CRYP peripheral in DES ECB mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Direction: Encryption or decryption
+ * @retval None
+ */
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_ECB | Direction);
+
+ /* Set the key */
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4U));
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+}
+
+/**
+ * @brief Sets the CRYP peripheral in DES CBC mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Direction: Encryption or decryption
+ * @retval None
+ */
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_CBC | Direction);
+
+ /* Set the key */
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4U));
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+}
+
+/**
+ * @brief Sets the CRYP peripheral in TDES ECB mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Direction: Encryption or decryption
+ * @retval None
+ */
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_ECB | Direction);
+
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+}
+
+/**
+ * @brief Sets the CRYP peripheral in TDES CBC mode
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Direction: Encryption or decryption
+ * @retval None
+ */
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the CRYP peripheral in AES CBC mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_CBC | Direction);
+
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+}
+
+/**
+ * @}
+ */
+
+ /* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRYP_Exported_Functions
+ * @{
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the CRYP according to the specified parameters
+ in the CRYP_InitTypeDef and creates the associated handle
+ (+) DeInitialize the CRYP peripheral
+ (+) Initialize the CRYP MSP
+ (+) DeInitialize CRYP MSP
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRYP according to the specified
+ * parameters in the CRYP_InitTypeDef and creates the associated handle.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp)
+{
+ /* Check the CRYP handle allocation */
+ if(hcryp == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize));
+ assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType));
+
+ if(hcryp->State == HAL_CRYP_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hcryp->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_CRYP_MspInit(hcryp);
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set the key size and data type*/
+ CRYP->CR = (uint32_t) (hcryp->Init.KeySize | hcryp->Init.DataType);
+
+ /* Reset CrypInCount and CrypOutCount */
+ hcryp->CrypInCount = 0U;
+ hcryp->CrypOutCount = 0U;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Set the default CRYP phase */
+ hcryp->Phase = HAL_CRYP_PHASE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the CRYP peripheral.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp)
+{
+ /* Check the CRYP handle allocation */
+ if(hcryp == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set the default CRYP phase */
+ hcryp->Phase = HAL_CRYP_PHASE_READY;
+
+ /* Reset CrypInCount and CrypOutCount */
+ hcryp->CrypInCount = 0U;
+ hcryp->CrypOutCount = 0U;
+
+ /* Disable the CRYP Peripheral Clock */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* DeInit the low level hardware: CLOCK, NVIC.*/
+ HAL_CRYP_MspDeInit(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP MSP.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes CRYP MSP.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group2 AES processing functions
+ * @brief processing functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### AES processing functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Encrypt plaintext using AES-128/192/256 using chaining modes
+ (+) Decrypt cyphertext using AES-128/192/256 using chaining modes
+ [..] Three processing functions are available:
+ (+) Polling mode
+ (+) Interrupt mode
+ (+) DMA mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16.
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES ECB decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16.
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES CBC decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16.
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CTR mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB encryption mode using Interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Locked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC encryption mode using Interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CBC mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Locked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR encryption mode using Interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CTR mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB decryption mode using Interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16.
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t tickstart = 0U;
+
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES ECB decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC decryption mode using IT.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Get the buffer addresses and sizes */
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES CBC decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR decryption mode using Interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Get the buffer addresses and sizes */
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CTR mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB encryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR encryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB decryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES ECB decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES CBC decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR decryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CTR mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group3 DES processing functions
+ * @brief processing functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### DES processing functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Encrypt plaintext using DES using ECB or CBC chaining modes
+ (+) Decrypt cyphertext using ECB or CBC chaining modes
+ [..] Three processing functions are available:
+ (+) Polling mode
+ (+) Interrupt mode
+ (+) DMA mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB encryption mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB encryption mode */
+ CRYP_SetDESECBMode(hcryp, 0U);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB decryption mode */
+ CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES CBC encryption mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC encryption mode */
+ CRYP_SetDESCBCMode(hcryp, 0U);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC decryption mode */
+ CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB encryption mode using IT.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB encryption mode */
+ CRYP_SetDESECBMode(hcryp, 0U);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES CBC encryption mode using interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC encryption mode */
+ CRYP_SetDESCBCMode(hcryp, 0U);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode using IT.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB decryption mode */
+ CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode using interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC decryption mode */
+ CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB encryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB encryption mode */
+ CRYP_SetDESECBMode(hcryp, 0U);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES CBC encryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC encryption mode */
+ CRYP_SetDESCBCMode(hcryp, 0U);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB decryption mode */
+ CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC decryption mode */
+ CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group4 TDES processing functions
+ * @brief processing functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### TDES processing functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Encrypt plaintext using TDES based on ECB or CBC chaining modes
+ (+) Decrypt cyphertext using TDES based on ECB or CBC chaining modes
+ [..] Three processing functions are available:
+ (+) Polling mode
+ (+) Interrupt mode
+ (+) DMA mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB encryption mode */
+ CRYP_SetTDESECBMode(hcryp, 0U);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB decryption mode */
+ CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Cypher Data and Get Plain Data */
+ if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC encryption mode */
+ CRYP_SetTDESCBCMode(hcryp, 0U);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC decryption mode */
+ CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Cypher Data and Get Plain Data */
+ if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB encryption mode using interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB encryption mode */
+ CRYP_SetTDESECBMode(hcryp, 0U);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call the Output data transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC encryption mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC encryption mode */
+ CRYP_SetTDESCBCMode(hcryp, 0U);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB decryption mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB decryption mode */
+ CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC decryption mode.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC decryption mode */
+ CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB encryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB encryption mode */
+ CRYP_SetTDESECBMode(hcryp, 0U);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC encryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC encryption mode */
+ CRYP_SetTDESCBCMode(hcryp, 0U);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB decryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB decryption mode */
+ CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC decryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC decryption mode */
+ CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group5 DMA callback functions
+ * @brief DMA callback functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### DMA callback functions #####
+ ==============================================================================
+ [..] This section provides DMA callback functions:
+ (+) DMA Input data transfer complete
+ (+) DMA Output data transfer complete
+ (+) DMA error
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Input FIFO transfer completed callbacks.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_InCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Output FIFO transfer completed callbacks.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_OutCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief CRYP error callbacks.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+ __weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group6 CRYP IRQ handler management
+ * @brief CRYP IRQ handler.
+ *
+@verbatim
+ ==============================================================================
+ ##### CRYP IRQ handler management #####
+ ==============================================================================
+[..] This section provides CRYP IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function handles CRYP interrupt request.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp)
+{
+ switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
+ {
+ case CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT:
+ HAL_CRYP_TDESECB_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT:
+ HAL_CRYP_TDESECB_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT:
+ HAL_CRYP_TDESCBC_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT:
+ HAL_CRYP_TDESCBC_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT:
+ HAL_CRYP_DESECB_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_DES_ECB_DECRYPT:
+ HAL_CRYP_DESECB_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT:
+ HAL_CRYP_DESCBC_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_DES_CBC_DECRYPT:
+ HAL_CRYP_DESCBC_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT:
+ HAL_CRYP_AESECB_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_ECB_DECRYPT:
+ HAL_CRYP_AESECB_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT:
+ HAL_CRYP_AESCBC_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CBC_DECRYPT:
+ HAL_CRYP_AESCBC_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT:
+ HAL_CRYP_AESCTR_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CTR_DECRYPT:
+ HAL_CRYP_AESCTR_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group7 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the CRYP state.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval HAL state
+ */
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp)
+{
+ return hcryp->State;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx || STM32F479xx */
+
+#endif /* HAL_CRYP_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,536 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of CRYP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_H
+#define __STM32F4xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRYP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Types CRYP Exported Types
+ * @{
+ */
+
+/** @defgroup CRYP_Exported_Types_Group1 CRYP Configuration Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref CRYP_Data_Type */
+
+ uint32_t KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit key length.
+ This parameter can be a value of @ref CRYP_Key_Size */
+
+ uint8_t* pKey; /*!< The key used for encryption/decryption */
+
+ uint8_t* pInitVect; /*!< The initialization vector used also as initialization
+ counter in CTR mode */
+
+ uint8_t IVSize; /*!< The size of initialization vector.
+ This parameter (called nonce size in CCM) is used only
+ in AES-128/192/256 encryption/decryption CCM mode */
+
+ uint8_t TagSize; /*!< The size of returned authentication TAG.
+ This parameter is used only in AES-128/192/256
+ encryption/decryption CCM mode */
+
+ uint8_t* Header; /*!< The header used in GCM and CCM modes */
+
+ uint32_t HeaderSize; /*!< The size of header buffer in bytes */
+
+ uint8_t* pScratch; /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes.
+ This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */
+}CRYP_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Types_Group2 CRYP State structures definition
+ * @{
+ */
+
+
+typedef enum
+{
+ HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */
+ HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */
+ HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP internal processing is ongoing */
+ HAL_CRYP_STATE_TIMEOUT = 0x03U, /*!< CRYP timeout state */
+ HAL_CRYP_STATE_ERROR = 0x04U /*!< CRYP error state */
+}HAL_CRYP_STATETypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Types_Group3 CRYP phase structures definition
+ * @{
+ */
+
+
+typedef enum
+{
+ HAL_CRYP_PHASE_READY = 0x01U, /*!< CRYP peripheral is ready for initialization. */
+ HAL_CRYP_PHASE_PROCESS = 0x02U, /*!< CRYP peripheral is in processing phase */
+ HAL_CRYP_PHASE_FINAL = 0x03U /*!< CRYP peripheral is in final phase
+ This is relevant only with CCM and GCM modes */
+}HAL_PhaseTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Types_Group4 CRYP handle Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ CRYP_TypeDef *Instance; /*!< CRYP registers base address */
+
+ CRYP_InitTypeDef Init; /*!< CRYP required parameters */
+
+ uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+ uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+ __IO uint16_t CrypInCount; /*!< Counter of inputed data */
+
+ __IO uint16_t CrypOutCount; /*!< Counter of output data */
+
+ HAL_StatusTypeDef Status; /*!< CRYP peripheral status */
+
+ HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */
+
+ DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRYP locking object */
+
+ __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
+}CRYP_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
+ * @{
+ */
+
+/** @defgroup CRYP_Key_Size CRYP Key Size
+ * @{
+ */
+#define CRYP_KEYSIZE_128B ((uint32_t)0x00000000U)
+#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0
+#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Data_Type CRYP Data Type
+ * @{
+ */
+#define CRYP_DATATYPE_32B ((uint32_t)0x00000000U)
+#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0
+#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1
+#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Constants_Group3 CRYP CRYP_AlgoModeDirection
+ * @{
+ */
+#define CRYP_CR_ALGOMODE_DIRECTION ((uint32_t)0x0008003CU)
+#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT ((uint32_t)0x00000000U)
+#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT ((uint32_t)0x00000004U)
+#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT ((uint32_t)0x00000008U)
+#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT ((uint32_t)0x0000000CU)
+#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT ((uint32_t)0x00000010U)
+#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT ((uint32_t)0x00000014U)
+#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT ((uint32_t)0x00000018U)
+#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT ((uint32_t)0x0000001CU)
+#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT ((uint32_t)0x00000020U)
+#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT ((uint32_t)0x00000024U)
+#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT ((uint32_t)0x00000028U)
+#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT ((uint32_t)0x0000002CU)
+#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT ((uint32_t)0x00000030U)
+#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT ((uint32_t)0x00000034U)
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Constants_Group4 CRYP CRYP_Interrupt
+ * @{
+ */
+#define CRYP_IT_INI ((uint32_t)CRYP_IMSCR_INIM) /*!< Input FIFO Interrupt */
+#define CRYP_IT_OUTI ((uint32_t)CRYP_IMSCR_OUTIM) /*!< Output FIFO Interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Constants_Group5 CRYP CRYP_Flags
+ * @{
+ */
+#define CRYP_FLAG_BUSY ((uint32_t)0x00000010U) /*!< The CRYP core is currently
+ processing a block of data
+ or a key preparation (for
+ AES decryption). */
+#define CRYP_FLAG_IFEM ((uint32_t)0x00000001U) /*!< Input FIFO is empty */
+#define CRYP_FLAG_IFNF ((uint32_t)0x00000002U) /*!< Input FIFO is not Full */
+#define CRYP_FLAG_OFNE ((uint32_t)0x00000004U) /*!< Output FIFO is not empty */
+#define CRYP_FLAG_OFFU ((uint32_t)0x00000008U) /*!< Output FIFO is Full */
+#define CRYP_FLAG_OUTRIS ((uint32_t)0x01000002U) /*!< Output FIFO service raw
+ interrupt status */
+#define CRYP_FLAG_INRIS ((uint32_t)0x01000001U) /*!< Input FIFO service raw
+ interrupt status */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
+ * @{
+ */
+
+/** @brief Reset CRYP handle state
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @retval None
+ */
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+
+/**
+ * @brief Enable/Disable the CRYP peripheral.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_CRYPEN)
+#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN)
+
+/**
+ * @brief Flush the data FIFO.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @retval None
+ */
+#define __HAL_CRYP_FIFO_FLUSH(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_FFLUSH)
+
+/**
+ * @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param MODE: The algorithm mode.
+ * @retval None
+ */
+#define __HAL_CRYP_SET_MODE(__HANDLE__, MODE) ((__HANDLE__)->Instance->CR |= (uint32_t)(MODE))
+
+/** @brief Check whether the specified CRYP flag is set or not.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data
+ * or a key preparation (for AES decryption).
+ * @arg CRYP_FLAG_IFEM: Input FIFO is empty
+ * @arg CRYP_FLAG_IFNF: Input FIFO is not full
+ * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
+ * @arg CRYP_FLAG_OFNE: Output FIFO is not empty
+ * @arg CRYP_FLAG_OFFU: Output FIFO is full
+ * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24U)) == 0x01U)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
+ ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
+
+/** @brief Check whether the specified CRYP interrupt is set or not.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending
+ * @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Enable the CRYP interrupt.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __INTERRUPT__: CRYP Interrupt.
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the CRYP interrupt.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __INTERRUPT__: CRYP interrupt.
+ * @retval None
+ */
+#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Include CRYP HAL Extension module */
+#include "stm32f4xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Functions CRYP Exported Functions
+ * @{
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group2
+ * @{
+ */
+/* AES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group3
+ * @{
+ */
+/* DES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* DES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group4
+ * @{
+ */
+/* TDES encryption/decryption using polling **********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* TDES encryption/decryption using interrupt ********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using DMA **************************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group5
+ * @{
+ */
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group6
+ * @{
+ */
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group7
+ * @{
+ */
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CRYP_Private_Types CRYP Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Variables CRYP Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Constants CRYP Private Constants
+ * @{
+ */
+#define CRYP_FLAG_MASK ((uint32_t)0x0000001FU)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRYP_Private_Macros CRYP Private Macros
+ * @{
+ */
+
+#define IS_CRYP_KEYSIZE(__KEYSIZE__) (((__KEYSIZE__) == CRYP_KEYSIZE_128B) || \
+ ((__KEYSIZE__) == CRYP_KEYSIZE_192B) || \
+ ((__KEYSIZE__) == CRYP_KEYSIZE_256B))
+
+
+#define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \
+ ((__DATATYPE__) == CRYP_DATATYPE_16B) || \
+ ((__DATATYPE__) == CRYP_DATATYPE_8B) || \
+ ((__DATATYPE__) == CRYP_DATATYPE_1B))
+
+
+ /**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Functions CRYP Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,3043 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Extended CRYP HAL module driver
+ * This file provides firmware functions to manage the following
+ * functionalities of CRYP extension peripheral:
+ * + Extended AES processing functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The CRYP Extension HAL driver can be used as follows:
+ (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
+ (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
+ (##) In case of using interrupts (e.g. HAL_CRYPEx_AESGCM_Encrypt_IT())
+ (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
+ (##) In case of using DMA to control data transfer (e.g. HAL_AES_ECB_Encrypt_DMA())
+ (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+ (+++) Configure and enable two DMA streams one for managing data transfer from
+ memory to peripheral (input stream) and another stream for managing data
+ transfer from peripheral to memory (output stream)
+ (+++) Associate the initialized DMA handle to the CRYP DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the two DMA Streams. The output stream should have higher
+ priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+ (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
+ (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
+ (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
+ (##) The encryption/decryption key. Its size depends on the algorithm
+ used for encryption/decryption
+ (##) The initialization vector (counter). It is not used ECB mode.
+ (#)Three processing (encryption/decryption) functions are available:
+ (##) Polling mode: encryption and decryption APIs are blocking functions
+ i.e. they process the data and wait till the processing is finished
+ e.g. HAL_CRYPEx_AESGCM_Encrypt()
+ (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+ i.e. they process the data under interrupt
+ e.g. HAL_CRYPEx_AESGCM_Encrypt_IT()
+ (##) DMA mode: encryption and decryption APIs are not blocking functions
+ i.e. the data transfer is ensured by DMA
+ e.g. HAL_CRYPEx_AESGCM_Encrypt_DMA()
+ (#)When the processing function is called at first time after HAL_CRYP_Init()
+ the CRYP peripheral is initialized and processes the buffer in input.
+ At second call, the processing function performs an append of the already
+ processed buffer.
+ When a new data block is to be processed, call HAL_CRYP_Init() then the
+ processing function.
+ (#)In AES-GCM and AES-CCM modes are an authenticated encryption algorithms
+ which provide authentication messages.
+ HAL_AES_GCM_Finish() and HAL_AES_CCM_Finish() are used to provide those
+ authentication messages.
+ Call those functions after the processing ones (polling, interrupt or DMA).
+ e.g. in AES-CCM mode call HAL_CRYPEx_AESCCM_Encrypt() to encrypt the plain data
+ then call HAL_CRYPEx_AESCCM_Finish() to get the authentication message
+ -@- For CCM Encrypt/Decrypt API's, only DataType = 8-bit is supported by this version.
+ -@- The HAL_CRYPEx_AESGCM_xxxx() implementation is limited to 32bits inputs data length
+ (Plain/Cyphertext, Header) compared with GCM standards specifications (800-38D).
+ (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CRYPEx CRYPEx
+ * @brief CRYP Extension HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+
+#if defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CRYPEx_Private_define
+ * @{
+ */
+#define CRYPEx_TIMEOUT_VALUE 1U
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CRYPEx_Private_Functions_prototypes CRYP Private Functions Prototypes
+ * @{
+ */
+static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector);
+static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
+static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout);
+static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout);
+static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma);
+static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma);
+static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma);
+static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup CRYPEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief DMA CRYP Input Data process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma)
+{
+ CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable the DMA transfer for input Fifo request by resetting the DIEN bit
+ in the DMACR register */
+ hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
+
+ /* Call input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+}
+
+/**
+ * @brief DMA CRYP Output Data process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma)
+{
+ CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable the DMA transfer for output Fifo request by resetting the DOEN bit
+ in the DMACR register */
+ hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Call output data transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+}
+
+/**
+ * @brief DMA CRYP communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hcryp->State= HAL_CRYP_STATE_READY;
+ HAL_CRYP_ErrorCallback(hcryp);
+}
+
+/**
+ * @brief Writes the Key in Key registers.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Key: Pointer to Key buffer
+ * @param KeySize: Size of Key
+ * @retval None
+ */
+static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
+{
+ uint32_t keyaddr = (uint32_t)Key;
+
+ switch(KeySize)
+ {
+ case CRYP_KEYSIZE_256B:
+ /* Key Initialisation */
+ hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+ break;
+ case CRYP_KEYSIZE_192B:
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+ break;
+ case CRYP_KEYSIZE_128B:
+ hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Writes the InitVector/InitCounter in IV registers.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param InitVector: Pointer to InitVector/InitCounter buffer
+ * @retval None
+ */
+static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector)
+{
+ uint32_t ivaddr = (uint32_t)InitVector;
+
+ hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
+}
+
+/**
+ * @brief Process Data: Writes Input data in polling mode and read the Output data.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Input: Pointer to the Input buffer.
+ * @param Ilength: Length of the Input buffer, must be a multiple of 16
+ * @param Output: Pointer to the returned buffer
+ * @param Timeout: Timeout value
+ * @retval None
+ */
+static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ uint32_t i = 0U;
+ uint32_t inputaddr = (uint32_t)Input;
+ uint32_t outputaddr = (uint32_t)Output;
+
+ for(i=0U; (i < Ilength); i+=16U)
+ {
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the Output block from the OUT FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets the header phase
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Input: Pointer to the Input buffer.
+ * @param Ilength: Length of the Input buffer, must be a multiple of 16
+ * @param Timeout: Timeout value
+ * @retval None
+ */
+static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ uint32_t loopcounter = 0U;
+ uint32_t headeraddr = (uint32_t)Input;
+
+ /***************************** Header phase *********************************/
+ if(hcryp->Init.HeaderSize != 0U)
+ {
+ /* Select header phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ for(loopcounter = 0U; (loopcounter < hcryp->Init.HeaderSize); loopcounter+=16U)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ }
+
+ /* Wait until the complete message has been processed */
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets the DMA configuration and start the DMA transfer.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param inputaddr: Address of the Input buffer
+ * @param Size: Size of the Input buffer, must be a multiple of 16
+ * @param outputaddr: Address of the Output buffer
+ * @retval None
+ */
+static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
+{
+ /* Set the CRYP DMA transfer complete callback */
+ hcryp->hdmain->XferCpltCallback = CRYPEx_GCMCCM_DMAInCplt;
+ /* Set the DMA error callback */
+ hcryp->hdmain->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
+
+ /* Set the CRYP DMA transfer complete callback */
+ hcryp->hdmaout->XferCpltCallback = CRYPEx_GCMCCM_DMAOutCplt;
+ /* Set the DMA error callback */
+ hcryp->hdmaout->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4U);
+
+ /* Enable In DMA request */
+ hcryp->Instance->DMACR = CRYP_DMACR_DIEN;
+
+ /* Enable the DMA Out DMA Stream */
+ HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4U);
+
+ /* Enable Out DMA request */
+ hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
+}
+
+/**
+ * @}
+ */
+
+/* Exported functions---------------------------------------------------------*/
+/** @addtogroup CRYPEx_Exported_Functions
+ * @{
+ */
+
+/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions
+ * @brief Extended processing functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended AES processing functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Encrypt plaintext using AES-128/192/256 using GCM and CCM chaining modes
+ (+) Decrypt cyphertext using AES-128/192/256 using GCM and CCM chaining modes
+ (+) Finish the processing. This function is available only for GCM and CCM
+ [..] Three processing methods are available:
+ (+) Polling mode
+ (+) Interrupt mode
+ (+) DMA mode
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CCM encryption mode then
+ * encrypt pPlainData. The cypher data are available in pCypherData.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ uint32_t headersize = hcryp->Init.HeaderSize;
+ uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+ uint32_t loopcounter = 0U;
+ uint32_t bufferidx = 0U;
+ uint8_t blockb0[16U] = {0U};/* Block B0 */
+ uint8_t ctr[16U] = {0U}; /* Counter */
+ uint32_t b0addr = (uint32_t)blockb0;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /************************ Formatting the header block *********************/
+ if(headersize != 0U)
+ {
+ /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+ if(headersize < 65280U)
+ {
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8U) & 0xFFU);
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFFU);
+ headersize += 2U;
+ }
+ else
+ {
+ /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+ hcryp->Init.pScratch[bufferidx++] = 0xFFU;
+ hcryp->Init.pScratch[bufferidx++] = 0xFEU;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ffU;
+ headersize += 6U;
+ }
+ /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+ for(loopcounter = 0U; loopcounter < headersize; loopcounter++)
+ {
+ hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+ }
+ /* Check if the header size is modulo 16 */
+ if ((headersize % 16U) != 0U)
+ {
+ /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+ for(loopcounter = headersize; loopcounter <= ((headersize/16U) + 1U) * 16U; loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = 0U;
+ }
+ /* Set the header size to modulo 16 */
+ headersize = ((headersize/16U) + 1U) * 16U;
+ }
+ /* Set the pointer headeraddr to hcryp->Init.pScratch */
+ headeraddr = (uint32_t)hcryp->Init.pScratch;
+ }
+ /*********************** Formatting the block B0 **************************/
+ if(headersize != 0U)
+ {
+ blockb0[0U] = 0x40U;
+ }
+ /* Flags byte */
+ /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07U) */
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2U))) >> 1U) & (uint8_t)0x07U) << 3U);
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15U) - hcryp->Init.IVSize) - (uint8_t)1U) & (uint8_t)0x07U);
+
+ for (loopcounter = 0U; loopcounter < hcryp->Init.IVSize; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = hcryp->Init.pInitVect[loopcounter];
+ }
+ for ( ; loopcounter < 13U; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = 0U;
+ }
+
+ blockb0[14U] = (Size >> 8U);
+ blockb0[15U] = (Size & 0xFFU);
+
+ /************************* Formatting the initial counter *****************/
+ /* Byte 0:
+ Bits 7 and 6 are reserved and shall be set to 0
+ Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter blocks
+ are distinct from B0
+ Bits 0, 1, and 2 contain the same encoding of q as in B0
+ */
+ ctr[0U] = blockb0[0U] & 0x07U;
+ /* byte 1 to NonceSize is the IV (Nonce) */
+ for(loopcounter = 1U; loopcounter < hcryp->Init.IVSize + 1U; loopcounter++)
+ {
+ ctr[loopcounter] = blockb0[loopcounter];
+ }
+ /* Set the LSB to 1 */
+ ctr[15U] |= 0x01U;
+
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CCM mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+ /* Select init phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+ b0addr = (uint32_t)blockb0;
+ /* Write the blockb0 block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /***************************** Header phase *******************************/
+ if(headersize != 0U)
+ {
+ /* Select header phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ for(loopcounter = 0U; (loopcounter < headersize); loopcounter+=16U)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+ {
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /* Write the header block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /* Save formatted counter into the scratch buffer pScratch */
+ for(loopcounter = 0U; (loopcounter < 16U); loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+ }
+ /* Reset bit 0 */
+ hcryp->Init.pScratch[15U] &= 0xFEU;
+
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYPEx_GCMCCM_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES GCM encryption mode then
+ * encrypt pPlainData. The cypher data are available in pCypherData.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES GCM mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Set the header phase */
+ if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable the CRYP peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYPEx_GCMCCM_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES GCM decryption mode then
+ * decrypted pCypherData. The cypher data are available in pPlainData.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the cyphertext buffer, must be a multiple of 16
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES GCM decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Set the header phase */
+ if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Disable the CRYP peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Computes the authentication TAG.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Size: Total length of the plain/cyphertext buffer
+ * @param AuthTag: Pointer to the authentication buffer
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint32_t Size, uint8_t *AuthTag, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ uint64_t headerlength = hcryp->Init.HeaderSize * 8U; /* Header length in bits */
+ uint64_t inputlength = Size * 8U; /* input length in bits */
+ uint32_t tagaddr = (uint32_t)AuthTag;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
+ {
+ /* Change the CRYP phase */
+ hcryp->Phase = HAL_CRYP_PHASE_FINAL;
+
+ /* Disable CRYP to start the final phase */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select final phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_FINAL);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write the number of bits in header (64 bits) followed by the number of bits
+ in the payload */
+ if(hcryp->Init.DataType == CRYP_DATATYPE_1B)
+ {
+ hcryp->Instance->DR = __RBIT(headerlength >> 32U);
+ hcryp->Instance->DR = __RBIT(headerlength);
+ hcryp->Instance->DR = __RBIT(inputlength >> 32U);
+ hcryp->Instance->DR = __RBIT(inputlength);
+ }
+ else if(hcryp->Init.DataType == CRYP_DATATYPE_8B)
+ {
+ hcryp->Instance->DR = __REV(headerlength >> 32U);
+ hcryp->Instance->DR = __REV(headerlength);
+ hcryp->Instance->DR = __REV(inputlength >> 32U);
+ hcryp->Instance->DR = __REV(inputlength);
+ }
+ else if(hcryp->Init.DataType == CRYP_DATATYPE_16B)
+ {
+ hcryp->Instance->DR = __ROR((uint32_t)(headerlength >> 32U), 16U);
+ hcryp->Instance->DR = __ROR((uint32_t)headerlength, 16U);
+ hcryp->Instance->DR = __ROR((uint32_t)(inputlength >> 32U), 16U);
+ hcryp->Instance->DR = __ROR((uint32_t)inputlength, 16U);
+ }
+ else if(hcryp->Init.DataType == CRYP_DATATYPE_32B)
+ {
+ hcryp->Instance->DR = (uint32_t)(headerlength >> 32U);
+ hcryp->Instance->DR = (uint32_t)(headerlength);
+ hcryp->Instance->DR = (uint32_t)(inputlength >> 32U);
+ hcryp->Instance->DR = (uint32_t)(inputlength);
+ }
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the Auth TAG in the IN FIFO */
+ *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+ tagaddr+=4U;
+ *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+ tagaddr+=4U;
+ *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+ tagaddr+=4U;
+ *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+ }
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Computes the authentication TAG for AES CCM mode.
+ * @note This API is called after HAL_AES_CCM_Encrypt()/HAL_AES_CCM_Decrypt()
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param AuthTag: Pointer to the authentication buffer
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tagaddr = (uint32_t)AuthTag;
+ uint32_t ctraddr = (uint32_t)hcryp->Init.pScratch;
+ uint32_t temptag[4U] = {0U}; /* Temporary TAG (MAC) */
+ uint32_t loopcounter;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
+ {
+ /* Change the CRYP phase */
+ hcryp->Phase = HAL_CRYP_PHASE_FINAL;
+
+ /* Disable CRYP to start the final phase */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select final phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_FINAL);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write the counter block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)ctraddr;
+ ctraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)ctraddr;
+ ctraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)ctraddr;
+ ctraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)ctraddr;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the Auth TAG in the IN FIFO */
+ temptag[0U] = hcryp->Instance->DOUT;
+ temptag[1U] = hcryp->Instance->DOUT;
+ temptag[2U] = hcryp->Instance->DOUT;
+ temptag[3U] = hcryp->Instance->DOUT;
+ }
+
+ /* Copy temporary authentication TAG in user TAG buffer */
+ for(loopcounter = 0U; loopcounter < hcryp->Init.TagSize ; loopcounter++)
+ {
+ /* Set the authentication TAG buffer */
+ *((uint8_t*)tagaddr+loopcounter) = *((uint8_t*)temptag+loopcounter);
+ }
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CCM decryption mode then
+ * decrypted pCypherData. The cypher data are available in pPlainData.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ uint32_t headersize = hcryp->Init.HeaderSize;
+ uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+ uint32_t loopcounter = 0U;
+ uint32_t bufferidx = 0U;
+ uint8_t blockb0[16U] = {0U};/* Block B0 */
+ uint8_t ctr[16U] = {0U}; /* Counter */
+ uint32_t b0addr = (uint32_t)blockb0;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /************************ Formatting the header block *********************/
+ if(headersize != 0U)
+ {
+ /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+ if(headersize < 65280U)
+ {
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8U) & 0xFFU);
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFFU);
+ headersize += 2U;
+ }
+ else
+ {
+ /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+ hcryp->Init.pScratch[bufferidx++] = 0xFFU;
+ hcryp->Init.pScratch[bufferidx++] = 0xFEU;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ffU;
+ headersize += 6U;
+ }
+ /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+ for(loopcounter = 0U; loopcounter < headersize; loopcounter++)
+ {
+ hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+ }
+ /* Check if the header size is modulo 16 */
+ if ((headersize % 16U) != 0U)
+ {
+ /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+ for(loopcounter = headersize; loopcounter <= ((headersize/16U) + 1U) * 16U; loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = 0U;
+ }
+ /* Set the header size to modulo 16 */
+ headersize = ((headersize/16U) + 1U) * 16U;
+ }
+ /* Set the pointer headeraddr to hcryp->Init.pScratch */
+ headeraddr = (uint32_t)hcryp->Init.pScratch;
+ }
+ /*********************** Formatting the block B0 **************************/
+ if(headersize != 0U)
+ {
+ blockb0[0U] = 0x40U;
+ }
+ /* Flags byte */
+ /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07U) */
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2U))) >> 1U) & (uint8_t)0x07U) << 3U);
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15U) - hcryp->Init.IVSize) - (uint8_t)1U) & (uint8_t)0x07U);
+
+ for (loopcounter = 0U; loopcounter < hcryp->Init.IVSize; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = hcryp->Init.pInitVect[loopcounter];
+ }
+ for ( ; loopcounter < 13U; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = 0U;
+ }
+
+ blockb0[14U] = (Size >> 8U);
+ blockb0[15U] = (Size & 0xFFU);
+
+ /************************* Formatting the initial counter *****************/
+ /* Byte 0:
+ Bits 7 and 6 are reserved and shall be set to 0
+ Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+ blocks are distinct from B0
+ Bits 0, 1, and 2 contain the same encoding of q as in B0
+ */
+ ctr[0U] = blockb0[0U] & 0x07U;
+ /* byte 1 to NonceSize is the IV (Nonce) */
+ for(loopcounter = 1U; loopcounter < hcryp->Init.IVSize + 1U; loopcounter++)
+ {
+ ctr[loopcounter] = blockb0[loopcounter];
+ }
+ /* Set the LSB to 1 */
+ ctr[15U] |= 0x01U;
+
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CCM mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+ /* Select init phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+ b0addr = (uint32_t)blockb0;
+ /* Write the blockb0 block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /***************************** Header phase *******************************/
+ if(headersize != 0U)
+ {
+ /* Select header phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+ /* Enable Crypto processor */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ for(loopcounter = 0U; (loopcounter < headersize); loopcounter+=16U)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Write the header block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /* Save formatted counter into the scratch buffer pScratch */
+ for(loopcounter = 0U; (loopcounter < 16U); loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+ }
+ /* Reset bit 0 */
+ hcryp->Init.pScratch[15U] &= 0xFEU;
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES GCM encryption mode using IT.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Get the buffer addresses and sizes */
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES GCM mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP to start the init phase */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+
+ }
+ }
+
+ /* Set the header phase */
+ if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1U) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Disable the CRYP peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ if(Size != 0U)
+ {
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+ }
+ else
+ {
+ /* Process Locked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state and phase */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ }
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ uint32_t headersize = hcryp->Init.HeaderSize;
+ uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+ uint32_t loopcounter = 0U;
+ uint32_t bufferidx = 0U;
+ uint8_t blockb0[16U] = {0U};/* Block B0 */
+ uint8_t ctr[16U] = {0U}; /* Counter */
+ uint32_t b0addr = (uint32_t)blockb0;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /************************ Formatting the header block *******************/
+ if(headersize != 0U)
+ {
+ /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+ if(headersize < 65280U)
+ {
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8U) & 0xFFU);
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFFU);
+ headersize += 2U;
+ }
+ else
+ {
+ /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+ hcryp->Init.pScratch[bufferidx++] = 0xFFU;
+ hcryp->Init.pScratch[bufferidx++] = 0xFEU;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ffU;
+ headersize += 6U;
+ }
+ /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+ for(loopcounter = 0U; loopcounter < headersize; loopcounter++)
+ {
+ hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+ }
+ /* Check if the header size is modulo 16 */
+ if ((headersize % 16U) != 0U)
+ {
+ /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+ for(loopcounter = headersize; loopcounter <= ((headersize/16U) + 1U) * 16U; loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = 0U;
+ }
+ /* Set the header size to modulo 16 */
+ headersize = ((headersize/16U) + 1U) * 16U;
+ }
+ /* Set the pointer headeraddr to hcryp->Init.pScratch */
+ headeraddr = (uint32_t)hcryp->Init.pScratch;
+ }
+ /*********************** Formatting the block B0 ************************/
+ if(headersize != 0U)
+ {
+ blockb0[0U] = 0x40U;
+ }
+ /* Flags byte */
+ /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07U) */
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2U))) >> 1U) & (uint8_t)0x07U) << 3U);
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15U) - hcryp->Init.IVSize) - (uint8_t)1U) & (uint8_t)0x07U);
+
+ for (loopcounter = 0U; loopcounter < hcryp->Init.IVSize; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = hcryp->Init.pInitVect[loopcounter];
+ }
+ for ( ; loopcounter < 13U; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = 0U;
+ }
+
+ blockb0[14U] = (Size >> 8U);
+ blockb0[15U] = (Size & 0xFFU);
+
+ /************************* Formatting the initial counter ***************/
+ /* Byte 0:
+ Bits 7 and 6 are reserved and shall be set to 0
+ Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+ blocks are distinct from B0
+ Bits 0, 1, and 2 contain the same encoding of q as in B0
+ */
+ ctr[0U] = blockb0[0U] & 0x07U;
+ /* byte 1 to NonceSize is the IV (Nonce) */
+ for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1U; loopcounter++)
+ {
+ ctr[loopcounter] = blockb0[loopcounter];
+ }
+ /* Set the LSB to 1 */
+ ctr[15U] |= 0x01U;
+
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CCM mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+ /* Select init phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+ b0addr = (uint32_t)blockb0;
+ /* Write the blockb0 block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /***************************** Header phase *****************************/
+ if(headersize != 0U)
+ {
+ /* Select header phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+ /* Enable Crypto processor */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ for(loopcounter = 0U; (loopcounter < headersize); loopcounter+=16U)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write the header block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Save formatted counter into the scratch buffer pScratch */
+ for(loopcounter = 0U; (loopcounter < 16U); loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+ }
+ /* Reset bit 0 */
+ hcryp->Init.pScratch[15U] &= 0xFEU;
+
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ if(Size != 0U)
+ {
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+ }
+ else
+ {
+ /* Change the CRYP state and phase */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ }
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call Input transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES GCM decryption mode using IT.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the cyphertext buffer, must be a multiple of 16
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Get the buffer addresses and sizes */
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES GCM decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP to start the init phase */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the header phase */
+ if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1U) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Disable the CRYP peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ if(Size != 0U)
+ {
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+ }
+ else
+ {
+ /* Process Locked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state and phase */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ }
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CCM decryption mode using interrupt
+ * then decrypted pCypherData. The cypher data are available in pPlainData.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+ uint32_t tickstart = 0U;
+ uint32_t headersize = hcryp->Init.HeaderSize;
+ uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+ uint32_t loopcounter = 0U;
+ uint32_t bufferidx = 0U;
+ uint8_t blockb0[16U] = {0U};/* Block B0 */
+ uint8_t ctr[16U] = {0U}; /* Counter */
+ uint32_t b0addr = (uint32_t)blockb0;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /************************ Formatting the header block *******************/
+ if(headersize != 0U)
+ {
+ /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+ if(headersize < 65280U)
+ {
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8U) & 0xFFU);
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFFU);
+ headersize += 2U;
+ }
+ else
+ {
+ /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+ hcryp->Init.pScratch[bufferidx++] = 0xFFU;
+ hcryp->Init.pScratch[bufferidx++] = 0xFEU;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ffU;
+ headersize += 6U;
+ }
+ /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+ for(loopcounter = 0U; loopcounter < headersize; loopcounter++)
+ {
+ hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+ }
+ /* Check if the header size is modulo 16 */
+ if ((headersize % 16U) != 0U)
+ {
+ /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+ for(loopcounter = headersize; loopcounter <= ((headersize/16U) + 1U) * 16U; loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = 0U;
+ }
+ /* Set the header size to modulo 16 */
+ headersize = ((headersize/16U) + 1U) * 16U;
+ }
+ /* Set the pointer headeraddr to hcryp->Init.pScratch */
+ headeraddr = (uint32_t)hcryp->Init.pScratch;
+ }
+ /*********************** Formatting the block B0 ************************/
+ if(headersize != 0U)
+ {
+ blockb0[0U] = 0x40U;
+ }
+ /* Flags byte */
+ /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07U) */
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2U))) >> 1U) & (uint8_t)0x07U) << 3U);
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15U) - hcryp->Init.IVSize) - (uint8_t)1U) & (uint8_t)0x07U);
+
+ for (loopcounter = 0U; loopcounter < hcryp->Init.IVSize; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = hcryp->Init.pInitVect[loopcounter];
+ }
+ for ( ; loopcounter < 13U; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = 0U;
+ }
+
+ blockb0[14U] = (Size >> 8U);
+ blockb0[15U] = (Size & 0xFFU);
+
+ /************************* Formatting the initial counter ***************/
+ /* Byte 0:
+ Bits 7 and 6 are reserved and shall be set to 0
+ Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+ blocks are distinct from B0
+ Bits 0, 1, and 2 contain the same encoding of q as in B0
+ */
+ ctr[0U] = blockb0[0U] & 0x07U;
+ /* byte 1 to NonceSize is the IV (Nonce) */
+ for(loopcounter = 1U; loopcounter < hcryp->Init.IVSize + 1U; loopcounter++)
+ {
+ ctr[loopcounter] = blockb0[loopcounter];
+ }
+ /* Set the LSB to 1 */
+ ctr[15U] |= 0x01U;
+
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CCM mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+ /* Select init phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+ b0addr = (uint32_t)blockb0;
+ /* Write the blockb0 block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /***************************** Header phase *****************************/
+ if(headersize != 0U)
+ {
+ /* Select header phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+ /* Enable Crypto processor */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ for(loopcounter = 0U; (loopcounter < headersize); loopcounter+=16U)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write the header block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Save formatted counter into the scratch buffer pScratch */
+ for(loopcounter = 0U; (loopcounter < 16U); loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+ }
+ /* Reset bit 0 */
+ hcryp->Init.pScratch[15U] &= 0xFEU;
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES GCM encryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES GCM mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP to start the init phase */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the header phase */
+ if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1U) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Disable the CRYP peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Unlock process */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+ uint32_t headersize;
+ uint32_t headeraddr;
+ uint32_t loopcounter = 0U;
+ uint32_t bufferidx = 0U;
+ uint8_t blockb0[16U] = {0U};/* Block B0 */
+ uint8_t ctr[16U] = {0U}; /* Counter */
+ uint32_t b0addr = (uint32_t)blockb0;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ headersize = hcryp->Init.HeaderSize;
+ headeraddr = (uint32_t)hcryp->Init.Header;
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /************************ Formatting the header block *******************/
+ if(headersize != 0U)
+ {
+ /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+ if(headersize < 65280U)
+ {
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8U) & 0xFFU);
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFFU);
+ headersize += 2U;
+ }
+ else
+ {
+ /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+ hcryp->Init.pScratch[bufferidx++] = 0xFFU;
+ hcryp->Init.pScratch[bufferidx++] = 0xFEU;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ffU;
+ headersize += 6U;
+ }
+ /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+ for(loopcounter = 0U; loopcounter < headersize; loopcounter++)
+ {
+ hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+ }
+ /* Check if the header size is modulo 16 */
+ if ((headersize % 16U) != 0U)
+ {
+ /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+ for(loopcounter = headersize; loopcounter <= ((headersize/16U) + 1U) * 16U; loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = 0U;
+ }
+ /* Set the header size to modulo 16 */
+ headersize = ((headersize/16U) + 1U) * 16U;
+ }
+ /* Set the pointer headeraddr to hcryp->Init.pScratch */
+ headeraddr = (uint32_t)hcryp->Init.pScratch;
+ }
+ /*********************** Formatting the block B0 ************************/
+ if(headersize != 0U)
+ {
+ blockb0[0U] = 0x40U;
+ }
+ /* Flags byte */
+ /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07U) */
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2U))) >> 1U) & (uint8_t)0x07U) << 3U);
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15U) - hcryp->Init.IVSize) - (uint8_t)1U) & (uint8_t)0x07U);
+
+ for (loopcounter = 0U; loopcounter < hcryp->Init.IVSize; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = hcryp->Init.pInitVect[loopcounter];
+ }
+ for ( ; loopcounter < 13U; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = 0U;
+ }
+
+ blockb0[14U] = (Size >> 8U);
+ blockb0[15U] = (Size & 0xFFU);
+
+ /************************* Formatting the initial counter ***************/
+ /* Byte 0:
+ Bits 7 and 6 are reserved and shall be set to 0
+ Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+ blocks are distinct from B0
+ Bits 0, 1, and 2 contain the same encoding of q as in B0
+ */
+ ctr[0U] = blockb0[0U] & 0x07U;
+ /* byte 1 to NonceSize is the IV (Nonce) */
+ for(loopcounter = 1U; loopcounter < hcryp->Init.IVSize + 1U; loopcounter++)
+ {
+ ctr[loopcounter] = blockb0[loopcounter];
+ }
+ /* Set the LSB to 1 */
+ ctr[15U] |= 0x01U;
+
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CCM mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+ /* Select init phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+ b0addr = (uint32_t)blockb0;
+ /* Write the blockb0 block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /***************************** Header phase *****************************/
+ if(headersize != 0U)
+ {
+ /* Select header phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+ /* Enable Crypto processor */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ for(loopcounter = 0U; (loopcounter < headersize); loopcounter+=16U)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write the header block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Save formatted counter into the scratch buffer pScratch */
+ for(loopcounter = 0U; (loopcounter < 16U); loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+ }
+ /* Reset bit 0 */
+ hcryp->Init.pScratch[15U] &= 0xFEU;
+
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Unlock process */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES GCM decryption mode using DMA.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer.
+ * @param Size: Length of the cyphertext buffer, must be a multiple of 16
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES GCM decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+ /* Enable CRYP to start the init phase */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the header phase */
+ if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1U) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Disable the CRYP peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Unlock process */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CCM decryption mode using DMA
+ * then decrypted pCypherData. The cypher data are available in pPlainData.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData: Pointer to the cyphertext buffer
+ * @param Size: Length of the plaintext buffer, must be a multiple of 16
+ * @param pPlainData: Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+ uint32_t headersize;
+ uint32_t headeraddr;
+ uint32_t loopcounter = 0U;
+ uint32_t bufferidx = 0U;
+ uint8_t blockb0[16U] = {0U};/* Block B0 */
+ uint8_t ctr[16U] = {0U}; /* Counter */
+ uint32_t b0addr = (uint32_t)blockb0;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ headersize = hcryp->Init.HeaderSize;
+ headeraddr = (uint32_t)hcryp->Init.Header;
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /************************ Formatting the header block *******************/
+ if(headersize != 0U)
+ {
+ /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+ if(headersize < 65280U)
+ {
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8U) & 0xFFU);
+ hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFFU);
+ headersize += 2U;
+ }
+ else
+ {
+ /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+ hcryp->Init.pScratch[bufferidx++] = 0xFFU;
+ hcryp->Init.pScratch[bufferidx++] = 0xFEU;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00U;
+ hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ffU;
+ headersize += 6U;
+ }
+ /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+ for(loopcounter = 0U; loopcounter < headersize; loopcounter++)
+ {
+ hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+ }
+ /* Check if the header size is modulo 16 */
+ if ((headersize % 16U) != 0U)
+ {
+ /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+ for(loopcounter = headersize; loopcounter <= ((headersize/16U) + 1U) * 16U; loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = 0U;
+ }
+ /* Set the header size to modulo 16 */
+ headersize = ((headersize/16U) + 1U) * 16U;
+ }
+ /* Set the pointer headeraddr to hcryp->Init.pScratch */
+ headeraddr = (uint32_t)hcryp->Init.pScratch;
+ }
+ /*********************** Formatting the block B0 ************************/
+ if(headersize != 0U)
+ {
+ blockb0[0U] = 0x40U;
+ }
+ /* Flags byte */
+ /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07U) */
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2U))) >> 1U) & (uint8_t)0x07U) << 3U);
+ blockb0[0U] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15U) - hcryp->Init.IVSize) - (uint8_t)1U) & (uint8_t)0x07U);
+
+ for (loopcounter = 0U; loopcounter < hcryp->Init.IVSize; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = hcryp->Init.pInitVect[loopcounter];
+ }
+ for ( ; loopcounter < 13U; loopcounter++)
+ {
+ blockb0[loopcounter+1U] = 0U;
+ }
+
+ blockb0[14U] = (Size >> 8U);
+ blockb0[15U] = (Size & 0xFFU);
+
+ /************************* Formatting the initial counter ***************/
+ /* Byte 0:
+ Bits 7 and 6 are reserved and shall be set to 0
+ Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+ blocks are distinct from B0
+ Bits 0, 1, and 2 contain the same encoding of q as in B0
+ */
+ ctr[0U] = blockb0[0U] & 0x07U;
+ /* byte 1 to NonceSize is the IV (Nonce) */
+ for(loopcounter = 1U; loopcounter < hcryp->Init.IVSize + 1U; loopcounter++)
+ {
+ ctr[loopcounter] = blockb0[loopcounter];
+ }
+ /* Set the LSB to 1 */
+ ctr[15U] |= 0x01U;
+
+ /* Set the key */
+ CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CCM mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
+
+ /* Set the Initialization Vector */
+ CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+ /* Select init phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+ b0addr = (uint32_t)blockb0;
+ /* Write the blockb0 block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+ b0addr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+ {
+ /* Check for the Timeout */
+
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+
+ }
+ }
+ /***************************** Header phase *****************************/
+ if(headersize != 0U)
+ {
+ /* Select header phase */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+ /* Enable Crypto processor */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ for(loopcounter = 0U; (loopcounter < headersize); loopcounter+=16U)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write the header block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+ headeraddr+=4U;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Save formatted counter into the scratch buffer pScratch */
+ for(loopcounter = 0U; (loopcounter < 16U); loopcounter++)
+ {
+ hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+ }
+ /* Reset bit 0 */
+ hcryp->Init.pScratch[15U] &= 0xFEU;
+ /* Select payload phase once the header phase is performed */
+ __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+ /* Set the input and output addresses and start DMA transfer */
+ CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Unlock process */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYPEx_Exported_Functions_Group2 CRYPEx IRQ handler management
+ * @brief CRYPEx IRQ handler.
+ *
+@verbatim
+ ==============================================================================
+ ##### CRYPEx IRQ handler management #####
+ ==============================================================================
+[..] This section provides CRYPEx IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function handles CRYPEx interrupt request.
+ * @param hcryp: pointer to a CRYPEx_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+
+void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp)
+{
+ switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
+ {
+ case CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT:
+ HAL_CRYPEx_AESGCM_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_GCM_DECRYPT:
+ HAL_CRYPEx_AESGCM_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT:
+ HAL_CRYPEx_AESCCM_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CCM_DECRYPT:
+ HAL_CRYPEx_AESCCM_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+
+#endif /* HAL_CRYP_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,221 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of CRYP HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_EX_H
+#define __STM32F4xx_HAL_CRYP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRYPEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRYPEx_Exported_Constants CRYPEx Exported Constants
+ * @{
+ */
+
+/** @defgroup CRYPEx_Exported_Constants_Group1 CRYP AlgoModeDirection
+ * @{
+ */
+#define CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT ((uint32_t)0x00080000U)
+#define CRYP_CR_ALGOMODE_AES_GCM_DECRYPT ((uint32_t)0x00080004U)
+#define CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT ((uint32_t)0x00080008U)
+#define CRYP_CR_ALGOMODE_AES_CCM_DECRYPT ((uint32_t)0x0008000CU)
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYPEx_Exported_Constants_Group3 CRYP PhaseConfig
+ * @brief The phases are relevant only to AES-GCM and AES-CCM
+ * @{
+ */
+#define CRYP_PHASE_INIT ((uint32_t)0x00000000U)
+#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0
+#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1
+#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRYPEx_Exported_Macros CRYP Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Set the phase: Init, header, payload, final.
+ * This is relevant only for GCM and CCM modes.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __PHASE__: The phase.
+ * @retval None
+ */
+#define __HAL_CRYP_SET_PHASE(__HANDLE__, __PHASE__) do{(__HANDLE__)->Instance->CR &= (uint32_t)(~CRYP_CR_GCM_CCMPH);\
+ (__HANDLE__)->Instance->CR |= (uint32_t)(__PHASE__);\
+ }while(0)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions
+ * @{
+ */
+
+/** @addtogroup CRYPEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* AES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint32_t Size, uint8_t *AuthTag, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRYPEx_Exported_Functions_Group2
+ * @{
+ */
+
+void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Types CRYPEx Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros
+ * @{
+ */
+
+ /**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,965 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief DAC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Digital to Analog Converter (DAC) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ *
+ @verbatim
+ ==============================================================================
+ ##### DAC Peripheral features #####
+ ==============================================================================
+ [..]
+ *** DAC Channels ***
+ ====================
+ [..]
+ The device integrates two 12-bit Digital Analog Converters that can
+ be used independently or simultaneously (dual mode):
+ (#) DAC channel1 with DAC_OUT1 (PA4) as output
+ (#) DAC channel2 with DAC_OUT2 (PA5) as output
+
+ *** DAC Triggers ***
+ ====================
+ [..]
+ Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE
+ and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register.
+ [..]
+ Digital to Analog conversion can be triggered by:
+ (#) External event: EXTI Line 9 (any GPIOx_Pin9) using DAC_TRIGGER_EXT_IT9.
+ The used pin (GPIOx_Pin9) must be configured in input mode.
+
+ (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8
+ (DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...)
+
+ (#) Software using DAC_TRIGGER_SOFTWARE
+
+ *** DAC Buffer mode feature ***
+ ===============================
+ [..]
+ Each DAC channel integrates an output buffer that can be used to
+ reduce the output impedance, and to drive external loads directly
+ without having to add an external operational amplifier.
+ To enable, the output buffer use
+ sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+ [..]
+ (@) Refer to the device datasheet for more details about output
+ impedance value with and without output buffer.
+
+ *** DAC wave generation feature ***
+ ===================================
+ [..]
+ Both DAC channels can be used to generate
+ (#) Noise wave
+ (#) Triangle wave
+
+ *** DAC data format ***
+ =======================
+ [..]
+ The DAC data format can be:
+ (#) 8-bit right alignment using DAC_ALIGN_8B_R
+ (#) 12-bit left alignment using DAC_ALIGN_12B_L
+ (#) 12-bit right alignment using DAC_ALIGN_12B_R
+
+ *** DAC data value to voltage correspondence ***
+ ================================================
+ [..]
+ The analog output voltage on each DAC channel pin is determined
+ by the following equation:
+ DAC_OUTx = VREF+ * DOR / 4095
+ with DOR is the Data Output Register
+ VEF+ is the input voltage reference (refer to the device datasheet)
+ e.g. To set DAC_OUT1 to 0.7V, use
+ Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V
+
+ *** DMA requests ***
+ =====================
+ [..]
+ A DMA1 request can be generated when an external trigger (but not
+ a software trigger) occurs if DMA1 requests are enabled using
+ HAL_DAC_Start_DMA()
+ [..]
+ DMA1 requests are mapped as following:
+ (#) DAC channel1 : mapped on DMA1 Stream5 channel7 which must be
+ already configured
+ (#) DAC channel2 : mapped on DMA1 Stream6 channel7 which must be
+ already configured
+
+ -@- For Dual mode and specific signal (Triangle and noise) generation please
+ refer to Extension Features Driver description
+
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) DAC APB clock must be enabled to get write access to DAC
+ registers using HAL_DAC_Init()
+ (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode.
+ (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function.
+ (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA functions
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Start the DAC peripheral using HAL_DAC_Start()
+ (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function.
+ (+) Stop the DAC peripheral using HAL_DAC_Stop()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length
+ of data to be transferred at each end of conversion
+ (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1()or HAL_DAC_ConvCpltCallbackCh2()
+ function is executed and user can add his own code by customization of function pointer
+ HAL_DAC_ConvCpltCallbackCh1 or HAL_DAC_ConvCpltCallbackCh2
+ (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can
+ add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1
+ (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA()
+
+ *** DAC HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DAC HAL driver.
+
+ (+) __HAL_DAC_ENABLE : Enable the DAC peripheral
+ (+) __HAL_DAC_DISABLE : Disable the DAC peripheral
+ (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags
+ (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status
+
+ [..]
+ (@) You can refer to the DAC HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DAC DAC
+ * @brief DAC driver modules
+ * @{
+ */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup DAC_Private_Functions
+ * @{
+ */
+/* Private function prototypes -----------------------------------------------*/
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DAC_Exported_Functions DAC Exported Functions
+ * @{
+ */
+
+/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the DAC.
+ (+) De-initialize the DAC.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the DAC peripheral according to the specified parameters
+ * in the DAC_InitStruct.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac)
+{
+ /* Check DAC handle */
+ if(hdac == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Check the parameters */
+ assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+
+ if(hdac->State == HAL_DAC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hdac->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_DAC_MspInit(hdac);
+ }
+
+ /* Initialize the DAC state*/
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Set DAC error code to none */
+ hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+
+ /* Initialize the DAC state*/
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the DAC peripheral registers to their default reset values.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac)
+{
+ /* Check DAC handle */
+ if(hdac == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_DAC_MspDeInit(hdac);
+
+ /* Set DAC error code to none */
+ hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DAC MSP.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the DAC MSP.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion.
+ (+) Stop conversion.
+ (+) Start conversion and enable DMA transfer.
+ (+) Stop conversion and disable DMA transfer.
+ (+) Get result of conversion.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ if(Channel == DAC_CHANNEL_1)
+ {
+ tmp1 = hdac->Instance->CR & DAC_CR_TEN1;
+ tmp2 = hdac->Instance->CR & DAC_CR_TSEL1;
+ /* Check if software trigger enabled */
+ if((tmp1 == DAC_CR_TEN1) && (tmp2 == DAC_CR_TSEL1))
+ {
+ /* Enable the selected DAC software conversion */
+ hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1;
+ }
+ }
+ else
+ {
+ tmp1 = hdac->Instance->CR & DAC_CR_TEN2;
+ tmp2 = hdac->Instance->CR & DAC_CR_TSEL2;
+ /* Check if software trigger enabled */
+ if((tmp1 == DAC_CR_TEN2) && (tmp2 == DAC_CR_TSEL2))
+ {
+ /* Enable the selected DAC software conversion*/
+ hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG2;
+ }
+ }
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables DAC and stop conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Disable the Peripheral */
+ __HAL_DAC_DISABLE(hdac, Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @param pData: The destination peripheral Buffer address.
+ * @param Length: The length of data to be transferred from memory to DAC peripheral
+ * @param Alignment: Specifies the data alignment for DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_ALIGN(Alignment));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ if(Channel == DAC_CHANNEL_1)
+ {
+ /* Set the DMA transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
+
+ /* Set the DMA half transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
+
+ /* Set the DMA error callback for channel1 */
+ hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
+
+ /* Enable the selected DAC channel1 DMA request */
+ hdac->Instance->CR |= DAC_CR_DMAEN1;
+
+ /* Case of use of channel 1 */
+ switch(Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
+ break;
+ default:
+ break;
+ }
+ }
+ else
+ {
+ /* Set the DMA transfer complete callback for channel2 */
+ hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2;
+
+ /* Set the DMA half transfer complete callback for channel2 */
+ hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2;
+
+ /* Set the DMA error callback for channel2 */
+ hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2;
+
+ /* Enable the selected DAC channel2 DMA request */
+ hdac->Instance->CR |= DAC_CR_DMAEN2;
+
+ /* Case of use of channel 2 */
+ switch(Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R2;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L2;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R2;
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Enable the DMA Stream */
+ if(Channel == DAC_CHANNEL_1)
+ {
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+ }
+ else
+ {
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2);
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables DAC and stop conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Disable the selected DAC channel DMA request */
+ hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << Channel);
+
+ /* Disable the Peripheral */
+ __HAL_DAC_DISABLE(hdac, Channel);
+
+ /* Disable the DMA Channel */
+ /* Channel1 is used */
+ if(Channel == DAC_CHANNEL_1)
+ {
+ status = HAL_DMA_Abort(hdac->DMA_Handle1);
+ }
+ else /* Channel2 is used for */
+ {
+ status = HAL_DMA_Abort(hdac->DMA_Handle2);
+ }
+
+ /* Check if DMA Channel effectively disabled */
+ if(status != HAL_OK)
+ {
+ /* Update DAC state machine to error */
+ hdac->State = HAL_DAC_STATE_ERROR;
+ }
+ else
+ {
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Returns the DAC channel data output register value */
+ if(Channel == DAC_CHANNEL_1)
+ {
+ return hdac->Instance->DOR1;
+ }
+ else
+ {
+ return hdac->Instance->DOR2;
+ }
+}
+
+/**
+ * @brief Handles DAC interrupt request
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
+{
+ /* Check underrun channel 1 flag */
+ if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to channel1 DMA underrun error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1;
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1);
+
+ /* Disable the selected DAC channel1 DMA request */
+ hdac->Instance->CR &= ~DAC_CR_DMAEN1;
+
+ /* Error callback */
+ HAL_DAC_DMAUnderrunCallbackCh1(hdac);
+ }
+ /* Check underrun channel 2 flag */
+ if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2))
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to channel2 DMA underrun error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH2;
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR2);
+
+ /* Disable the selected DAC channel1 DMA request */
+ hdac->Instance->CR &= ~DAC_CR_DMAEN2;
+
+ /* Error callback */
+ HAL_DACEx_DMAUnderrunCallbackCh2(hdac);
+ }
+}
+
+/**
+ * @brief Conversion complete callback in non blocking mode for Channel1
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Conversion half DMA transfer callback in non blocking mode for Channel1
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error DAC callback for Channel1.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA underrun DAC callback for channel1.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure channels.
+ (+) Set the specified data holding register value for DAC channel.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param sConfig: DAC configuration structure.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
+{
+ uint32_t tmpreg1 = 0U, tmpreg2 = 0U;
+
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Get the DAC CR value */
+ tmpreg1 = hdac->Instance->CR;
+ /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+ tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
+ /* Configure for the selected DAC channel: buffer output, trigger */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
+ tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << Channel;
+ /* Write to DAC CR */
+ hdac->Instance->CR = tmpreg1;
+ /* Disable wave generation */
+ hdac->Instance->CR &= ~(DAC_CR_WAVE1 << Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @param Alignment: Specifies the data alignment.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @param Data: Data to be loaded in the selected data holding register.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data)
+{
+ __IO uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_ALIGN(Alignment));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)hdac->Instance;
+ if(Channel == DAC_CHANNEL_1)
+ {
+ tmp += DAC_DHR12R1_ALIGNMENT(Alignment);
+ }
+ else
+ {
+ tmp += DAC_DHR12R2_ALIGNMENT(Alignment);
+ }
+
+ /* Set the DAC channel1 selected data holding register */
+ *(__IO uint32_t *) tmp = Data;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DAC state.
+ (+) Check the DAC Errors.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the DAC state
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL state
+ */
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac)
+{
+ /* Return DAC state */
+ return hdac->State;
+}
+
+
+/**
+ * @brief Return the DAC error code
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval DAC Error Code
+ */
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac)
+{
+ return hdac->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA conversion complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_DAC_ConvCpltCallbackCh1(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* Conversion complete callback */
+ HAL_DAC_ConvHalfCpltCallbackCh1(hdac);
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Set DAC error code to DMA error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+
+ HAL_DAC_ErrorCallbackCh1(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,413 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of DAC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_H
+#define __STM32F4xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DAC_Exported_Types DAC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */
+ HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */
+ HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */
+ HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */
+ HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */
+}HAL_DAC_StateTypeDef;
+
+/**
+ * @brief DAC handle Structure definition
+ */
+typedef struct
+{
+ DAC_TypeDef *Instance; /*!< Register base address */
+
+ __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
+
+ HAL_LockTypeDef Lock; /*!< DAC locking object */
+
+ DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
+
+ DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
+
+ __IO uint32_t ErrorCode; /*!< DAC Error code */
+
+}DAC_HandleTypeDef;
+
+/**
+ * @brief DAC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+}DAC_ChannelConfTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DAC_Exported_Constants DAC Exported Constants
+ * @{
+ */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+ * @{
+ */
+#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DAM underrun error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DAM underrun error */
+#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_trigger_selection DAC Trigger Selection
+ * @{
+ */
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000U) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T5_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T8_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer DAC Output Buffer
+ * @{
+ */
+#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000U)
+#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection DAC Channel Selection
+ * @{
+ */
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000U)
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignment DAC Data Alignment
+ * @{
+ */
+#define DAC_ALIGN_12B_R ((uint32_t)0x00000000U)
+#define DAC_ALIGN_12B_L ((uint32_t)0x00000004U)
+#define DAC_ALIGN_8B_R ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition DAC Flags Definition
+ * @{
+ */
+#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_IT_definition DAC IT Definition
+ * @{
+ */
+#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+ * @{
+ */
+
+/** @brief Reset DAC handle state
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/** @brief Enable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __DAC_Channel__: specifies the DAC channel
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Disable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __DAC_Channel__: specifies the DAC channel.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Enable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified DAC interrupt source is enabled or disabled.
+ * @param __HANDLE__: DAC handle
+ * @param __INTERRUPT__: DAC interrupt source to check
+ * This parameter can be any combination of the following values:
+ * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
+ * @retval State of interruption (SET or RESET)
+ */
+#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Get the selected DAC's flag status.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
+ * @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
+ * @retval None
+ */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the DAC's flag.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
+ * @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
+ * @retval None
+ */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+/**
+ * @}
+ */
+
+/* Include DAC HAL Extension module */
+#include "stm32f4xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DAC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DAC_Private_Constants DAC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DAC_Private_Macros DAC Private Macros
+ * @{
+ */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0U)
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+ ((ALIGN) == DAC_ALIGN_12B_L) || \
+ ((ALIGN) == DAC_ALIGN_8B_R))
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+ ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+/** @brief Set DHR12R1 alignment
+ * @param __ALIGNMENT__: specifies the DAC alignment
+ * @retval None
+ */
+#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000008U) + (__ALIGNMENT__))
+
+/** @brief Set DHR12R2 alignment
+ * @param __ALIGNMENT__: specifies the DAC alignment
+ * @retval None
+ */
+#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000014U) + (__ALIGNMENT__))
+
+/** @brief Set DHR12RD alignment
+ * @param __ALIGNMENT__: specifies the DAC alignment
+ * @retval None
+ */
+#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000020U) + (__ALIGNMENT__))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DAC_Private_Functions DAC Private Functions
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,390 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief DAC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of DAC extension peripheral:
+ * + Extended features functions
+ *
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) :
+ Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
+ HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2.
+ (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
+ (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DACEx DACEx
+ * @brief DAC driver modules
+ * @{
+ */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Functions DAC Exported Functions
+ * @{
+ */
+
+/** @defgroup DACEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended features functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion.
+ (+) Stop conversion.
+ (+) Start conversion and enable DMA transfer.
+ (+) Stop conversion and disable DMA transfer.
+ (+) Get result of conversion.
+ (+) Get result of dual mode conversion.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
+{
+ uint32_t tmp = 0U;
+
+ tmp |= hdac->Instance->DOR1;
+
+ tmp |= hdac->Instance->DOR2 << 16U;
+
+ /* Returns the DAC channel data output register value */
+ return tmp;
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * DAC_CHANNEL_1 / DAC_CHANNEL_2
+ * @param Amplitude: Select max triangle amplitude.
+ * This parameter can be one of the following values:
+ * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
+ * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3
+ * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7
+ * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15
+ * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31
+ * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63
+ * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127
+ * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255
+ * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511
+ * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023
+ * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047
+ * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the selected wave generation for the selected DAC channel */
+ MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_1 | Amplitude) << Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * DAC_CHANNEL_1 / DAC_CHANNEL_2
+ * @param Amplitude: Unmask DAC channel LFSR for noise wave generation.
+ * This parameter can be one of the following values:
+ * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the selected wave generation for the selected DAC channel */
+ MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_0 | Amplitude) << Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the specified data holding register value for dual DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Alignment: Specifies the data alignment for dual channel DAC.
+ * This parameter can be one of the following values:
+ * DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @param Data1: Data for DAC Channel2 to be loaded in the selected data holding register.
+ * @param Data2: Data for DAC Channel1 to be loaded in the selected data holding register.
+ * @note In dual mode, a unique register access is required to write in both
+ * DAC channels at the same time.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
+{
+ uint32_t data = 0U, tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(Alignment));
+ assert_param(IS_DAC_DATA(Data1));
+ assert_param(IS_DAC_DATA(Data2));
+
+ /* Calculate and set dual DAC data holding register value */
+ if (Alignment == DAC_ALIGN_8B_R)
+ {
+ data = ((uint32_t)Data2 << 8U) | Data1;
+ }
+ else
+ {
+ data = ((uint32_t)Data2 << 16U) | Data1;
+ }
+
+ tmp = (uint32_t)hdac->Instance;
+ tmp += DAC_DHR12RD_ALIGNMENT(Alignment);
+
+ /* Set the dual DAC selected data holding register */
+ *(__IO uint32_t *)tmp = data;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Conversion complete callback in non blocking mode for Channel2
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Conversion half DMA transfer callback in non blocking mode for Channel2
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvHalfCpltCallbackCh2 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error DAC callback for Channel2.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA underrun DAC callback for channel2.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_DMAUnderrunCallbackCh2 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA conversion complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_DACEx_ConvCpltCallbackCh2(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* Conversion complete callback */
+ HAL_DACEx_ConvHalfCpltCallbackCh2(hdac);
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Set DAC error code to DMA error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+
+ HAL_DACEx_ErrorCallbackCh2(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,200 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of DAC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_EX_H
+#define __STM32F4xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DACEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Constants DAC Exported Constants
+ * @{
+ */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude DAC LFS Run Mask Triangle Amplitude
+ * @{
+ */
+#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000U) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000U) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DACEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DACEx_Exported_Functions_Group1
+ * @{
+ */
+/* Extension features functions ***********************************************/
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DACEx_Private_Constants DAC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DACEx_Private_Macros DAC Private Macros
+ * @{
+ */
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DACEx_Private_Functions DAC Private Functions
+ * @{
+ */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,881 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief DCMI HAL module driver
+ * This file provides firmware functions to manage the following
+ * functionalities of the Digital Camera Interface (DCMI) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Error functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The sequence below describes how to use this driver to capture image
+ from a camera module connected to the DCMI Interface.
+ This sequence does not take into account the configuration of the
+ camera module, which should be made before to configure and enable
+ the DCMI to capture images.
+
+ (#) Program the required configuration through following parameters:
+ horizontal and vertical polarity, pixel clock polarity, Capture Rate,
+ Synchronization Mode, code of the frame delimiter and data width
+ using HAL_DCMI_Init() function.
+
+ (#) Configure the DMA2_Stream1 channel1 to transfer Data from DCMI DR
+ register to the destination memory buffer.
+
+ (#) Program the required configuration through following parameters:
+ DCMI mode, destination memory Buffer address and the data length
+ and enable capture using HAL_DCMI_Start_DMA() function.
+
+ (#) Optionally, configure and Enable the CROP feature to select a rectangular
+ window from the received image using HAL_DCMI_ConfigCrop()
+ and HAL_DCMI_EnableCROP() functions
+
+ (#) The capture can be stopped using HAL_DCMI_Stop() function.
+
+ (#) To control DCMI state you can use the function HAL_DCMI_GetState().
+
+ *** DCMI HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DCMI HAL driver.
+
+ (+) __HAL_DCMI_ENABLE: Enable the DCMI peripheral.
+ (+) __HAL_DCMI_DISABLE: Disable the DCMI peripheral.
+ (+) __HAL_DCMI_GET_FLAG: Get the DCMI pending flags.
+ (+) __HAL_DCMI_CLEAR_FLAG: Clear the DCMI pending flags.
+ (+) __HAL_DCMI_ENABLE_IT: Enable the specified DCMI interrupts.
+ (+) __HAL_DCMI_DISABLE_IT: Disable the specified DCMI interrupts.
+ (+) __HAL_DCMI_GET_IT_SOURCE: Check whether the specified DCMI interrupt has occurred or not.
+
+ [..]
+ (@) You can refer to the DCMI HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup DCMI DCMI
+ * @brief DCMI HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define HAL_TIMEOUT_DCMI_STOP ((uint32_t)14U) /* Set timeout to 1s */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void DCMI_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void DCMI_DMAError(DMA_HandleTypeDef *hdma);
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Functions DCMI Exported Functions
+ * @{
+ */
+
+/** @defgroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the DCMI
+ (+) De-initialize the DCMI
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the DCMI according to the specified
+ * parameters in the DCMI_InitTypeDef and create the associated handle.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Check the DCMI peripheral state */
+ if(hdcmi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check function parameters */
+ assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance));
+ assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity));
+ assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity));
+ assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity));
+ assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode));
+ assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate));
+ assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode));
+ assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode));
+
+ if(hdcmi->State == HAL_DCMI_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hdcmi->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_DCMI_MspInit(hdcmi);
+ }
+
+ /* Change the DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Set DCMI parameters */
+ /* Configures the HS, VS, DE and PC polarity */
+ hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL | DCMI_CR_VSPOL | DCMI_CR_EDM_0 |
+ DCMI_CR_EDM_1 | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG |
+ DCMI_CR_ESS);
+ hdcmi->Instance->CR |= (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate | \
+ hdcmi->Init.VSPolarity | hdcmi->Init.HSPolarity | \
+ hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode | \
+ hdcmi->Init.JPEGMode);
+
+ if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED)
+ {
+ hdcmi->Instance->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode) |
+ ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << DCMI_POSITION_ESCR_LSC)|
+ ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << DCMI_POSITION_ESCR_LEC) |
+ ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << DCMI_POSITION_ESCR_FEC));
+ }
+
+ /* Enable the Line, Vsync, Error and Overrun interrupts */
+ __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR);
+
+ /* Update error code */
+ hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+
+ /* Initialize the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the DCMI peripheral registers to their default reset
+ * values.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi)
+{
+ /* DeInit the low level hardware */
+ HAL_DCMI_MspDeInit(hdcmi);
+
+ /* Update error code */
+ hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+
+ /* Initialize the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdcmi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DCMI MSP.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the DCMI MSP.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+/** @defgroup DCMI_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure destination address and data length and
+ Enables DCMI DMA request and enables DCMI capture
+ (+) Stop the DCMI capture.
+ (+) Handles DCMI interrupt request.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables DCMI DMA request and enables DCMI capture
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @param DCMI_Mode: DCMI capture mode snapshot or continuous grab.
+ * @param pData: The destination memory Buffer address (LCD Frame buffer).
+ * @param Length: The length of capture to be transferred.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length)
+{
+ /* Initialize the second memory address */
+ uint32_t SecondMemAddress = 0U;
+
+ /* Check function parameters */
+ assert_param(IS_DCMI_CAPTURE_MODE(DCMI_Mode));
+
+ /* Process Locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Enable DCMI by setting DCMIEN bit */
+ __HAL_DCMI_ENABLE(hdcmi);
+
+ /* Configure the DCMI Mode */
+ hdcmi->Instance->CR &= ~(DCMI_CR_CM);
+ hdcmi->Instance->CR |= (uint32_t)(DCMI_Mode);
+
+ /* Set the DMA memory0 conversion complete callback */
+ hdcmi->DMA_Handle->XferCpltCallback = DCMI_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hdcmi->DMA_Handle->XferErrorCallback = DCMI_DMAError;
+
+ /* Set the dma abort callback */
+ hdcmi->DMA_Handle->XferAbortCallback = NULL;
+
+ /* Reset transfer counters value */
+ hdcmi->XferCount = 0;
+ hdcmi->XferTransferNumber = 0;
+
+ if(Length <= 0xFFFFU)
+ {
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, Length);
+ }
+ else /* DCMI_DOUBLE_BUFFER Mode */
+ {
+ /* Set the DMA memory1 conversion complete callback */
+ hdcmi->DMA_Handle->XferM1CpltCallback = DCMI_DMAXferCplt;
+
+ /* Initialize transfer parameters */
+ hdcmi->XferCount = 1U;
+ hdcmi->XferSize = Length;
+ hdcmi->pBuffPtr = pData;
+
+ /* Get the number of buffer */
+ while(hdcmi->XferSize > 0xFFFFU)
+ {
+ hdcmi->XferSize = (hdcmi->XferSize/2U);
+ hdcmi->XferCount = hdcmi->XferCount*2U;
+ }
+
+ /* Update DCMI counter and transfer number*/
+ hdcmi->XferCount = (hdcmi->XferCount - 2U);
+ hdcmi->XferTransferNumber = hdcmi->XferCount;
+
+ /* Update second memory address */
+ SecondMemAddress = (uint32_t)(pData + (4U*hdcmi->XferSize));
+
+ /* Start DMA multi buffer transfer */
+ HAL_DMAEx_MultiBufferStart_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, SecondMemAddress, hdcmi->XferSize);
+ }
+
+ /* Enable Capture */
+ hdcmi->Instance->CR |= DCMI_CR_CAPTURE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdcmi);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable DCMI DMA request and Disable DCMI capture
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi)
+{
+ __IO uint32_t count = SystemCoreClock / HAL_TIMEOUT_DCMI_STOP;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Disable Capture */
+ hdcmi->Instance->CR &= ~(DCMI_CR_CAPTURE);
+
+ /* Check if the DCMI capture effectively disabled */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_TIMEOUT;
+
+ status = HAL_TIMEOUT;
+ }
+ }
+ while((hdcmi->Instance->CR & DCMI_CR_CAPTURE) != 0);
+
+ /* Disable the DCMI */
+ __HAL_DCMI_DISABLE(hdcmi);
+
+ /* Disable the DMA */
+ HAL_DMA_Abort(hdcmi->DMA_Handle);
+
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_NONE;
+
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ /* Return function status */
+ return status;
+}
+
+HAL_StatusTypeDef HAL_DCMI_Suspend(DCMI_HandleTypeDef* hdcmi)
+{
+ __IO uint32_t count = SystemCoreClock / HAL_TIMEOUT_DCMI_STOP;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdcmi);
+
+ if(hdcmi->State == HAL_DCMI_STATE_BUSY)
+ {
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_SUSPENDED;
+
+ /* Disable Capture */
+ hdcmi->Instance->CR &= ~(DCMI_CR_CAPTURE);
+
+ /* Check if the DCMI capture effectively disabled */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_TIMEOUT;
+
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ status = HAL_TIMEOUT;
+ break;
+ }
+ }
+ while((hdcmi->Instance->CR & DCMI_CR_CAPTURE) != 0);
+ }
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Resume DCMI capture
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_Resume(DCMI_HandleTypeDef* hdcmi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdcmi);
+
+ if(hdcmi->State == HAL_DCMI_STATE_SUSPENDED)
+ {
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Disable Capture */
+ hdcmi->Instance->CR |= DCMI_CR_CAPTURE;
+ }
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles DCMI interrupt request.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for the DCMI.
+ * @retval None
+ */
+void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi)
+{
+ uint32_t isr_value = READ_REG(hdcmi->Instance->MISR);
+
+ /* Synchronization error interrupt management *******************************/
+ if((isr_value & DCMI_FLAG_ERRRI) == DCMI_FLAG_ERRRI)
+ {
+ /* Clear the Synchronization error flag */
+ __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_ERRRI);
+
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_SYNC;
+
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_ERROR;
+
+ /* Set the synchronization error callback */
+ hdcmi->DMA_Handle->XferAbortCallback = DCMI_DMAError;
+
+ /* Abort the DMA Transfer */
+ HAL_DMA_Abort_IT(hdcmi->DMA_Handle);
+ }
+ /* Overflow interrupt management ********************************************/
+ if((isr_value & DCMI_FLAG_OVRRI) == DCMI_FLAG_OVRRI)
+ {
+ /* Clear the Overflow flag */
+ __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_OVRRI);
+
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_OVR;
+
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_ERROR;
+
+ /* Set the overflow callback */
+ hdcmi->DMA_Handle->XferAbortCallback = DCMI_DMAError;
+
+ /* Abort the DMA Transfer */
+ HAL_DMA_Abort_IT(hdcmi->DMA_Handle);
+ }
+ /* Line Interrupt management ************************************************/
+ if((isr_value & DCMI_FLAG_LINERI) == DCMI_FLAG_LINERI)
+ {
+ /* Clear the Line interrupt flag */
+ __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_LINERI);
+
+ /* Line interrupt Callback */
+ HAL_DCMI_LineEventCallback(hdcmi);
+ }
+ /* VSYNC interrupt management ***********************************************/
+ if((isr_value & DCMI_FLAG_VSYNCRI) == DCMI_FLAG_VSYNCRI)
+ {
+ /* Clear the VSYNC flag */
+ __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_VSYNCRI);
+
+ /* VSYNC Callback */
+ HAL_DCMI_VsyncEventCallback(hdcmi);
+ }
+ /* FRAME interrupt management ***********************************************/
+ if((isr_value & DCMI_FLAG_FRAMERI) == DCMI_FLAG_FRAMERI)
+ {
+ /* When snapshot mode, disable Vsync, Error and Overrun interrupts */
+ if((hdcmi->Instance->CR & DCMI_CR_CM) == DCMI_MODE_SNAPSHOT)
+ {
+ /* Disable the Line, Vsync, Error and Overrun interrupts */
+ __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR);
+ }
+
+ /* Disable the Frame interrupt */
+ __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+ /* Frame Callback */
+ HAL_DCMI_FrameEventCallback(hdcmi);
+ }
+}
+
+/**
+ * @brief Error DCMI callback.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Line Event callback.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_LineEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief VSYNC Event callback.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_VsyncEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Frame Event callback.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_FrameEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+[..] This section provides functions allowing to:
+ (+) Configure the CROP feature.
+ (+) Enable/Disable the CROP feature.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the DCMI CROP coordinate.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @param X0: DCMI window X offset
+ * @param Y0: DCMI window Y offset
+ * @param XSize: DCMI Pixel per line
+ * @param YSize: DCMI Line number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_ConfigCrop(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize)
+{
+ /* Process Locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_DCMI_WINDOW_COORDINATE(X0));
+ assert_param(IS_DCMI_WINDOW_COORDINATE(YSize));
+ assert_param(IS_DCMI_WINDOW_COORDINATE(XSize));
+ assert_param(IS_DCMI_WINDOW_HEIGHT(Y0));
+
+ /* Configure CROP */
+ hdcmi->Instance->CWSIZER = (XSize | (YSize << DCMI_POSITION_CWSIZE_VLINE));
+ hdcmi->Instance->CWSTRTR = (X0 | (Y0 << DCMI_POSITION_CWSTRT_VST));
+
+ /* Initialize the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the Crop feature.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_DisableCrop(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Process Locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Disable DCMI Crop feature */
+ hdcmi->Instance->CR &= ~(uint32_t)DCMI_CR_CROP;
+
+ /* Change the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the Crop feature.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_EnableCrop(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Process Locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Enable DCMI Crop feature */
+ hdcmi->Instance->CR |= (uint32_t)DCMI_CR_CROP;
+
+ /* Change the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DCMI state.
+ (+) Get the specific DCMI error flag.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the DCMI state
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL state
+ */
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi)
+{
+ return hdcmi->State;
+}
+
+/**
+ * @brief Return the DCMI error code
+ * @param hdcmi : pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval DCMI Error Code
+ */
+uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi)
+{
+ return hdcmi->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DCMI_Private_Functions DCMI Private Functions
+ * @{
+ */
+
+/**
+ * @brief DMA conversion complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DCMI_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmp = 0U;
+
+ DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if(hdcmi->XferCount != 0)
+ {
+ /* Update memory 0 address location */
+ tmp = ((hdcmi->DMA_Handle->Instance->CR) & DMA_SxCR_CT);
+ if(((hdcmi->XferCount % 2U) == 0U) && (tmp != 0U))
+ {
+ tmp = hdcmi->DMA_Handle->Instance->M0AR;
+ HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8U*hdcmi->XferSize)), MEMORY0);
+ hdcmi->XferCount--;
+ }
+ /* Update memory 1 address location */
+ else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0U)
+ {
+ tmp = hdcmi->DMA_Handle->Instance->M1AR;
+ HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8U*hdcmi->XferSize)), MEMORY1);
+ hdcmi->XferCount--;
+ }
+ }
+ /* Update memory 0 address location */
+ else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) != 0U)
+ {
+ hdcmi->DMA_Handle->Instance->M0AR = hdcmi->pBuffPtr;
+ }
+ /* Update memory 1 address location */
+ else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0U)
+ {
+ tmp = hdcmi->pBuffPtr;
+ hdcmi->DMA_Handle->Instance->M1AR = (tmp + (4U*hdcmi->XferSize));
+ hdcmi->XferCount = hdcmi->XferTransferNumber;
+ }
+
+ /* Check if the frame is transferred */
+ if(hdcmi->XferCount == hdcmi->XferTransferNumber)
+ {
+ /* Enable the Frame interrupt */
+ __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+ /* When snapshot mode, set dcmi state to ready */
+ if((hdcmi->Instance->CR & DCMI_CR_CM) == DCMI_MODE_SNAPSHOT)
+ {
+ hdcmi->State= HAL_DCMI_STATE_READY;
+ }
+ }
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DCMI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if(hdcmi->DMA_Handle->ErrorCode != HAL_DMA_ERROR_FE)
+ {
+ /* Initialize the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+ }
+
+ /* DCMI error Callback */
+ HAL_DCMI_ErrorCallback(hdcmi);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+#endif /* HAL_DCMI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,537 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of DCMI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DCMI_H
+#define __STM32F4xx_HAL_DCMI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/* Include DCMI HAL Extended module */
+/* (include on top of file since DCMI structures are defined in extended file) */
+#include "stm32f4xx_hal_dcmi_ex.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DCMI DCMI
+ * @brief DCMI HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Types DCMI Exported Types
+ * @{
+ */
+/**
+ * @brief HAL DCMI State structures definition
+ */
+typedef enum
+{
+ HAL_DCMI_STATE_RESET = 0x00U, /*!< DCMI not yet initialized or disabled */
+ HAL_DCMI_STATE_READY = 0x01U, /*!< DCMI initialized and ready for use */
+ HAL_DCMI_STATE_BUSY = 0x02U, /*!< DCMI internal processing is ongoing */
+ HAL_DCMI_STATE_TIMEOUT = 0x03U, /*!< DCMI timeout state */
+ HAL_DCMI_STATE_ERROR = 0x04U, /*!< DCMI error state */
+ HAL_DCMI_STATE_SUSPENDED = 0x05U /*!< DCMI suspend state */
+}HAL_DCMI_StateTypeDef;
+
+/**
+ * @brief DCMI handle Structure definition
+ */
+typedef struct
+{
+ DCMI_TypeDef *Instance; /*!< DCMI Register base address */
+
+ DCMI_InitTypeDef Init; /*!< DCMI parameters */
+
+ HAL_LockTypeDef Lock; /*!< DCMI locking object */
+
+ __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */
+
+ __IO uint32_t XferCount; /*!< DMA transfer counter */
+
+ __IO uint32_t XferSize; /*!< DMA transfer size */
+
+ uint32_t XferTransferNumber; /*!< DMA transfer number */
+
+ uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */
+
+ __IO uint32_t ErrorCode; /*!< DCMI Error code */
+
+}DCMI_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Constants DCMI Exported Constants
+ * @{
+ */
+
+/** @defgroup DCMI_Error_Code DCMI Error Code
+ * @{
+ */
+#define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_DCMI_ERROR_OVR ((uint32_t)0x00000001U) /*!< Overrun error */
+#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002U) /*!< Synchronization error */
+#define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout error */
+#define HAL_DCMI_ERROR_DMA ((uint32_t)0x00000040U) /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Mode DCMI Capture Mode
+ * @{
+ */
+#define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000U) /*!< The received data are transferred continuously
+ into the destination memory through the DMA */
+#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of
+ frame and then transfers a single frame through the DMA */
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode
+ * @{
+ */
+#define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000U) /*!< Hardware synchronization data capture (frame/line start/stop)
+ is synchronized with the HSYNC/VSYNC signals */
+#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with
+ synchronization codes embedded in the data flow */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity
+ * @{
+ */
+#define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000U) /*!< Pixel clock active on Falling edge */
+#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity
+ * @{
+ */
+#define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000U) /*!< Vertical synchronization active Low */
+#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity
+ * @{
+ */
+#define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000U) /*!< Horizontal synchronization active Low */
+#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG
+ * @{
+ */
+#define DCMI_JPEG_DISABLE ((uint32_t)0x00000000U) /*!< Mode JPEG Disabled */
+#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Rate DCMI Capture Rate
+ * @{
+ */
+#define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000U) /*!< All frames are captured */
+#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */
+#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode
+ * @{
+ */
+#define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000U) /*!< Interface captures 8-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate
+ * @{
+ */
+#define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFFU) /*!< Window coordinate */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Height DCMI Window Height
+ * @{
+ */
+#define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFFU) /*!< Window Height */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Vertical_Line DCMI Window Vertical Line
+ * @{
+ */
+#define DCMI_POSITION_CWSIZE_VLINE (uint32_t)POSITION_VAL(DCMI_CWSIZE_VLINE) /*!< Required left shift to set crop window vertical line count */
+#define DCMI_POSITION_CWSTRT_VST (uint32_t)POSITION_VAL(DCMI_CWSTRT_VST) /*!< Required left shift to set crop window vertical start line count */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_interrupt_sources DCMI interrupt sources
+ * @{
+ */
+#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE) /*!< Capture complete interrupt */
+#define DCMI_IT_OVR ((uint32_t)DCMI_IER_OVR_IE) /*!< Overrun interrupt */
+#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE) /*!< Synchronization error interrupt */
+#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE) /*!< VSYNC interrupt */
+#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE) /*!< Line interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Flags DCMI Flags
+ * @{
+ */
+
+/**
+ * @brief DCMI SR register
+ */
+#define DCMI_FLAG_HSYNC ((uint32_t)DCMI_SR_INDEX|DCMI_SR_HSYNC) /*!< HSYNC pin state (active line / synchronization between lines) */
+#define DCMI_FLAG_VSYNC ((uint32_t)DCMI_SR_INDEX|DCMI_SR_VSYNC) /*!< VSYNC pin state (active frame / synchronization between frames) */
+#define DCMI_FLAG_FNE ((uint32_t)DCMI_SR_INDEX|DCMI_SR_FNE) /*!< FIFO not empty flag */
+/**
+ * @brief DCMI RIS register
+ */
+#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RISR_FRAME_RIS) /*!< Frame capture complete interrupt flag */
+#define DCMI_FLAG_OVRRI ((uint32_t)DCMI_RISR_OVR_RIS) /*!< Overrun interrupt flag */
+#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RISR_ERR_RIS) /*!< Synchronization error interrupt flag */
+#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RISR_VSYNC_RIS) /*!< VSYNC interrupt flag */
+#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RISR_LINE_RIS) /*!< Line interrupt flag */
+/**
+ * @brief DCMI MIS register
+ */
+#define DCMI_FLAG_FRAMEMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_FRAME_MIS) /*!< DCMI Frame capture complete masked interrupt status */
+#define DCMI_FLAG_OVRMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_OVR_MIS ) /*!< DCMI Overrun masked interrupt status */
+#define DCMI_FLAG_ERRMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_ERR_MIS ) /*!< DCMI Synchronization error masked interrupt status */
+#define DCMI_FLAG_VSYNCMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_VSYNC_MIS) /*!< DCMI VSYNC masked interrupt status */
+#define DCMI_FLAG_LINEMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_LINE_MIS ) /*!< DCMI Line masked interrupt status */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Macros DCMI Exported Macros
+ * @{
+ */
+
+/** @brief Reset DCMI handle state
+ * @param __HANDLE__: specifies the DCMI handle.
+ * @retval None
+ */
+#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET)
+
+/**
+ * @brief Enable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
+
+/**
+ * @brief Disable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DCMI pending flag.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be one of the following values (no combination allowed)
+ * @arg DCMI_FLAG_HSYNC: HSYNC pin state (active line / synchronization between lines)
+ * @arg DCMI_FLAG_VSYNC: VSYNC pin state (active frame / synchronization between frames)
+ * @arg DCMI_FLAG_FNE: FIFO empty flag
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVRRI: Overrun flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @arg DCMI_FLAG_FRAMEMI: DCMI Capture complete masked interrupt status
+ * @arg DCMI_FLAG_OVRMI: DCMI Overrun masked interrupt status
+ * @arg DCMI_FLAG_ERRMI: DCMI Synchronization error masked interrupt status
+ * @arg DCMI_FLAG_VSYNCMI: DCMI VSYNC masked interrupt status
+ * @arg DCMI_FLAG_LINEMI: DCMI Line masked interrupt status
+ * @retval The state of FLAG.
+ */
+#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
+((((__FLAG__) & (DCMI_SR_INDEX|DCMI_MIS_INDEX)) == 0x0U)? ((__HANDLE__)->Instance->RIS & (__FLAG__)) :\
+ (((__FLAG__) & DCMI_SR_INDEX) == 0x0U)? ((__HANDLE__)->Instance->MIS & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the DCMI pending flags.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVRRI: Overrun flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @retval None
+ */
+#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVR: Overrun interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVR: Overrun interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified DCMI interrupt has occurred or not.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVR: Overrun interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval The state of INTERRUPT.
+ */
+#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DCMI_Exported_Functions DCMI Exported Functions
+ * @{
+ */
+
+/** @addtogroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
+void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
+/**
+ * @}
+ */
+
+/** @addtogroup DCMI_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
+HAL_StatusTypeDef HAL_DCMI_Suspend(DCMI_HandleTypeDef* hdcmi);
+HAL_StatusTypeDef HAL_DCMI_Resume(DCMI_HandleTypeDef* hdcmi);
+void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_VsyncCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_HsyncCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
+/**
+ * @}
+ */
+
+/** @addtogroup DCMI_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DCMI_ConfigCrop(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
+HAL_StatusTypeDef HAL_DCMI_EnableCrop(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DisableCrop(DCMI_HandleTypeDef *hdcmi);
+/**
+ * @}
+ */
+
+/** @addtogroup DCMI_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
+uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DCMI_Private_Constants DCMI Private Constants
+ * @{
+ */
+#define DCMI_MIS_INDEX ((uint32_t)0x1000) /*!< DCMI MIS register index */
+#define DCMI_SR_INDEX ((uint32_t)0x2000) /*!< DCMI SR register index */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup DCMI_Private_Macros DCMI Private Macros
+ * @{
+ */
+#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
+ ((MODE) == DCMI_MODE_SNAPSHOT))
+
+#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
+ ((MODE) == DCMI_SYNCHRO_EMBEDDED))
+
+#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
+ ((POLARITY) == DCMI_PCKPOLARITY_RISING))
+
+#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_VSPOLARITY_HIGH))
+
+#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_HSPOLARITY_HIGH))
+
+#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
+ ((JPEG_MODE) == DCMI_JPEG_ENABLE))
+
+#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
+
+#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \
+ ((DATA) == DCMI_EXTEND_DATA_10B) || \
+ ((DATA) == DCMI_EXTEND_DATA_12B) || \
+ ((DATA) == DCMI_EXTEND_DATA_14B))
+
+#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
+
+#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DCMI_Private_Functions DCMI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,199 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief DCMI Extension HAL module driver
+ * This file provides firmware functions to manage the following
+ * functionalities of DCMI extension peripheral:
+ * + Extension features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### DCMI peripheral extension features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the DCMI interface for STM32F446xx
+ devices contains the following additional features :
+
+ (+) Support of Black and White cameras
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to manage the Black and White feature
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup DCMIEx DCMIEx
+ * @brief DCMI Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) ||\
+ defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DCMIEx_Exported_Functions DCMI Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup DCMIEx_Exported_Functions_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the DCMI
+ (+) De-initialize the DCMI
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the DCMI according to the specified
+ * parameters in the DCMI_InitTypeDef and create the associated handle.
+ * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Check the DCMI peripheral state */
+ if(hdcmi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check function parameters */
+ assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance));
+ assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity));
+ assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity));
+ assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity));
+ assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode));
+ assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate));
+ assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode));
+ assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode));
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ assert_param(IS_DCMI_BYTE_SELECT_MODE(hdcmi->Init.ByteSelectMode));
+ assert_param(IS_DCMI_BYTE_SELECT_START(hdcmi->Init.ByteSelectStart));
+ assert_param(IS_DCMI_LINE_SELECT_MODE(hdcmi->Init.LineSelectMode));
+ assert_param(IS_DCMI_LINE_SELECT_START(hdcmi->Init.LineSelectStart));
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+ if(hdcmi->State == HAL_DCMI_STATE_RESET)
+ {
+ /* Init the low level hardware */
+ HAL_DCMI_MspInit(hdcmi);
+ }
+
+ /* Change the DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+ /* Configures the HS, VS, DE and PC polarity */
+ hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL | DCMI_CR_VSPOL | DCMI_CR_EDM_0 |\
+ DCMI_CR_EDM_1 | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG |\
+ DCMI_CR_ESS
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ | DCMI_CR_BSM_0 | DCMI_CR_BSM_1 | DCMI_CR_OEBS |\
+ DCMI_CR_LSM | DCMI_CR_OELS
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+ );
+ hdcmi->Instance->CR |= (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate |\
+ hdcmi->Init.VSPolarity | hdcmi->Init.HSPolarity |\
+ hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode |\
+ hdcmi->Init.JPEGMode
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ | hdcmi->Init.ByteSelectMode |\
+ hdcmi->Init.ByteSelectStart | hdcmi->Init.LineSelectMode |\
+ hdcmi->Init.LineSelectStart
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+ );
+ if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED)
+ {
+ hdcmi->Instance->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode) |
+ ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << DCMI_POSITION_ESCR_LSC)|
+ ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << DCMI_POSITION_ESCR_LEC) |
+ ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << DCMI_POSITION_ESCR_FEC));
+
+ }
+
+ /* Enable the Line, Vsync, Error and Overrun interrupts */
+ __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR);
+
+ /* Update error code */
+ hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+
+ /* Initialize the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx ||\
+ STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_DCMI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,230 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of DCMI Extension HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DCMI_EX_H
+#define __STM32F4xx_HAL_DCMI_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DCMIEx
+ * @brief DCMI HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DCMIEx_Exported_Types DCMI Extended Exported Types
+ * @{
+ */
+/**
+ * @brief DCMIEx Embedded Synchronisation CODE Init structure definition
+ */
+typedef struct
+{
+ uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
+ uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */
+ uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */
+ uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
+}DCMI_CodesInitTypeDef;
+
+/**
+ * @brief DCMI Init structure definition
+ */
+typedef struct
+{
+ uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
+ This parameter can be a value of @ref DCMI_Synchronization_Mode */
+
+ uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
+ This parameter can be a value of @ref DCMI_PIXCK_Polarity */
+
+ uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_VSYNC_Polarity */
+
+ uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_HSYNC_Polarity */
+
+ uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
+ This parameter can be a value of @ref DCMI_Capture_Rate */
+
+ uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
+ This parameter can be a value of @ref DCMI_Extended_Data_Mode */
+
+ DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */
+
+ uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode
+ This parameter can be a value of @ref DCMI_MODE_JPEG */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ uint32_t ByteSelectMode; /*!< Specifies the data to be captured by the interface
+ This parameter can be a value of @ref DCMIEx_Byte_Select_Mode */
+
+ uint32_t ByteSelectStart; /*!< Specifies if the data to be captured by the interface is even or odd
+ This parameter can be a value of @ref DCMIEx_Byte_Select_Start */
+
+ uint32_t LineSelectMode; /*!< Specifies the line of data to be captured by the interface
+ This parameter can be a value of @ref DCMIEx_Line_Select_Mode */
+
+ uint32_t LineSelectStart; /*!< Specifies if the line of data to be captured by the interface is even or odd
+ This parameter can be a value of @ref DCMIEx_Line_Select_Start */
+
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+}DCMI_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup DCMIEx_Exported_Constants DCMI Exported Constants
+ * @{
+ */
+
+/** @defgroup DCMIEx_Byte_Select_Mode DCMI Byte Select Mode
+ * @{
+ */
+#define DCMI_BSM_ALL ((uint32_t)0x00000000U) /*!< Interface captures all received data */
+#define DCMI_BSM_OTHER ((uint32_t)DCMI_CR_BSM_0) /*!< Interface captures every other byte from the received data */
+#define DCMI_BSM_ALTERNATE_4 ((uint32_t)DCMI_CR_BSM_1) /*!< Interface captures one byte out of four */
+#define DCMI_BSM_ALTERNATE_2 ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMIEx_Byte_Select_Start DCMI Byte Select Start
+ * @{
+ */
+#define DCMI_OEBS_ODD ((uint32_t)0x00000000U) /*!< Interface captures first data from the frame/line start, second one being dropped */
+#define DCMI_OEBS_EVEN ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMIEx_Line_Select_Mode DCMI Line Select Mode
+ * @{
+ */
+#define DCMI_LSM_ALL ((uint32_t)0x00000000U) /*!< Interface captures all received lines */
+#define DCMI_LSM_ALTERNATE_2 ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMIEx_Line_Select_Start DCMI Line Select Start
+ * @{
+ */
+#define DCMI_OELS_ODD ((uint32_t)0x00000000U) /*!< Interface captures first line from the frame start, second one being dropped */
+#define DCMI_OELS_EVEN ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+#define DCMI_POSITION_ESCR_LSC (uint32_t)POSITION_VAL(DCMI_ESCR_LSC) /*!< Required left shift to set line start delimiter */
+#define DCMI_POSITION_ESCR_LEC (uint32_t)POSITION_VAL(DCMI_ESCR_LEC) /*!< Required left shift to set line end delimiter */
+#define DCMI_POSITION_ESCR_FEC (uint32_t)POSITION_VAL(DCMI_ESCR_FEC) /*!< Required left shift to set frame end delimiter */
+
+/* Private macro -------------------------------------------------------------*/
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup DCMIEx_Private_Macros DCMI Extended Private Macros
+ * @{
+ */
+#define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \
+ ((MODE) == DCMI_BSM_OTHER) || \
+ ((MODE) == DCMI_BSM_ALTERNATE_4) || \
+ ((MODE) == DCMI_BSM_ALTERNATE_2))
+
+#define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \
+ ((POLARITY) == DCMI_OEBS_EVEN))
+
+#define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \
+ ((MODE) == DCMI_LSM_ALTERNATE_2))
+
+#define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \
+ ((POLARITY) == DCMI_OELS_EVEN))
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_def.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_def.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,214 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_def.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DEF
+#define __STM32F4xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+#include "stm32_hal_legacy.h"
+#include <stdio.h>
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00U,
+ HAL_ERROR = 0x01U,
+ HAL_BUSY = 0x02U,
+ HAL_TIMEOUT = 0x03U
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00U,
+ HAL_LOCKED = 0x01U
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#define HAL_MAX_DELAY 0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+ (__DMA_HANDLE__).Parent = (__HANDLE__); \
+ } while(0)
+
+#define UNUSED(x) ((void)(x))
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__: specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1)
+ /* Reserved for future use */
+ #error "USE_RTOS should be 0 in the current HAL release"
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/**
+ * @brief __RAM_FUNC definition
+ */
+#if defined ( __CC_ARM )
+/* ARM Compiler
+ ------------
+ RAM functions are defined using the toolchain options.
+ Functions that are executed in RAM should reside in a separate source module.
+ Using the 'Options for File' dialog you can simply change the 'Code / Const'
+ area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+ dialog.
+*/
+#define __RAM_FUNC HAL_StatusTypeDef
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+ RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc HAL_StatusTypeDef
+
+#elif defined ( __GNUC__ )
+/* GNU Compiler
+ ------------
+ RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC HAL_StatusTypeDef __attribute__((section(".RamFunc")))
+
+#endif
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F4xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2988 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dfsdm.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the Digital Filter for Sigma-Delta Modulators
+ * (DFSDM) peripherals:
+ * + Initialization and configuration of channels and filters
+ * + Regular channels configuration
+ * + Injected channels configuration
+ * + Regular/Injected Channels DMA Configuration
+ * + Interrupts and flags management
+ * + Analog watchdog feature
+ * + Short-circuit detector feature
+ * + Extremes detector feature
+ * + Clock absence detector feature
+ * + Break generation on analog watchdog or short-circuit event
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ *** Channel initialization ***
+ ==============================
+ [..]
+ (#) User has first to initialize channels (before filters initialization).
+ (#) As prerequisite, fill in the HAL_DFSDM_ChannelMspInit() :
+ (++) Enable DFSDMz clock interface with __HAL_RCC_DFSDMz_CLK_ENABLE().
+ (++) Enable the clocks for the DFSDMz GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE().
+ (++) Configure these DFSDMz pins in alternate mode using HAL_GPIO_Init().
+ (++) If interrupt mode is used, enable and configure DFSDMz_FLT0 global
+ interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+ (#) Configure the output clock, input, serial interface, analog watchdog,
+ offset and data right bit shift parameters for this channel using the
+ HAL_DFSDM_ChannelInit() function.
+
+ *** Channel clock absence detector ***
+ ======================================
+ [..]
+ (#) Start clock absence detector using HAL_DFSDM_ChannelCkabStart() or
+ HAL_DFSDM_ChannelCkabStart_IT().
+ (#) In polling mode, use HAL_DFSDM_ChannelPollForCkab() to detect the clock
+ absence.
+ (#) In interrupt mode, HAL_DFSDM_ChannelCkabCallback() will be called if
+ clock absence is detected.
+ (#) Stop clock absence detector using HAL_DFSDM_ChannelCkabStop() or
+ HAL_DFSDM_ChannelCkabStop_IT().
+ (#) Please note that the same mode (polling or interrupt) has to be used
+ for all channels because the channels are sharing the same interrupt.
+ (#) Please note also that in interrupt mode, if clock absence detector is
+ stopped for one channel, interrupt will be disabled for all channels.
+
+ *** Channel short circuit detector ***
+ ======================================
+ [..]
+ (#) Start short circuit detector using HAL_DFSDM_ChannelScdStart() or
+ or HAL_DFSDM_ChannelScdStart_IT().
+ (#) In polling mode, use HAL_DFSDM_ChannelPollForScd() to detect short
+ circuit.
+ (#) In interrupt mode, HAL_DFSDM_ChannelScdCallback() will be called if
+ short circuit is detected.
+ (#) Stop short circuit detector using HAL_DFSDM_ChannelScdStop() or
+ or HAL_DFSDM_ChannelScdStop_IT().
+ (#) Please note that the same mode (polling or interrupt) has to be used
+ for all channels because the channels are sharing the same interrupt.
+ (#) Please note also that in interrupt mode, if short circuit detector is
+ stopped for one channel, interrupt will be disabled for all channels.
+
+ *** Channel analog watchdog value ***
+ =====================================
+ [..]
+ (#) Get analog watchdog filter value of a channel using
+ HAL_DFSDM_ChannelGetAwdValue().
+
+ *** Channel offset value ***
+ =====================================
+ [..]
+ (#) Modify offset value of a channel using HAL_DFSDM_ChannelModifyOffset().
+
+ *** Filter initialization ***
+ =============================
+ [..]
+ (#) After channel initialization, user has to init filters.
+ (#) As prerequisite, fill in the HAL_DFSDM_FilterMspInit() :
+ (++) If interrupt mode is used , enable and configure DFSDMz_FLTx global
+ interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+ Please note that DFSDMz_FLT0 global interrupt could be already
+ enabled if interrupt is used for channel.
+ (++) If DMA mode is used, configure DMA with HAL_DMA_Init() and link it
+ with DFSDMz filter handle using __HAL_LINKDMA().
+ (#) Configure the regular conversion, injected conversion and filter
+ parameters for this filter using the HAL_DFSDM_FilterInit() function.
+
+ *** Filter regular channel conversion ***
+ =========================================
+ [..]
+ (#) Select regular channel and enable/disable continuous mode using
+ HAL_DFSDM_FilterConfigRegChannel().
+ (#) Start regular conversion using HAL_DFSDM_FilterRegularStart(),
+ HAL_DFSDM_FilterRegularStart_IT(), HAL_DFSDM_FilterRegularStart_DMA() or
+ HAL_DFSDM_FilterRegularMsbStart_DMA().
+ (#) In polling mode, use HAL_DFSDM_FilterPollForRegConversion() to detect
+ the end of regular conversion.
+ (#) In interrupt mode, HAL_DFSDM_FilterRegConvCpltCallback() will be called
+ at the end of regular conversion.
+ (#) Get value of regular conversion and corresponding channel using
+ HAL_DFSDM_FilterGetRegularValue().
+ (#) In DMA mode, HAL_DFSDM_FilterRegConvHalfCpltCallback() and
+ HAL_DFSDM_FilterRegConvCpltCallback() will be called respectively at the
+ half transfer and at the transfer complete. Please note that
+ HAL_DFSDM_FilterRegConvHalfCpltCallback() will be called only in DMA
+ circular mode.
+ (#) Stop regular conversion using HAL_DFSDM_FilterRegularStop(),
+ HAL_DFSDM_FilterRegularStop_IT() or HAL_DFSDM_FilterRegularStop_DMA().
+
+ *** Filter injected channels conversion ***
+ ===========================================
+ [..]
+ (#) Select injected channels using HAL_DFSDM_FilterConfigInjChannel().
+ (#) Start injected conversion using HAL_DFSDM_FilterInjectedStart(),
+ HAL_DFSDM_FilterInjectedStart_IT(), HAL_DFSDM_FilterInjectedStart_DMA() or
+ HAL_DFSDM_FilterInjectedMsbStart_DMA().
+ (#) In polling mode, use HAL_DFSDM_FilterPollForInjConversion() to detect
+ the end of injected conversion.
+ (#) In interrupt mode, HAL_DFSDM_FilterInjConvCpltCallback() will be called
+ at the end of injected conversion.
+ (#) Get value of injected conversion and corresponding channel using
+ HAL_DFSDM_FilterGetInjectedValue().
+ (#) In DMA mode, HAL_DFSDM_FilterInjConvHalfCpltCallback() and
+ HAL_DFSDM_FilterInjConvCpltCallback() will be called respectively at the
+ half transfer and at the transfer complete. Please note that
+ HAL_DFSDM_FilterInjConvCpltCallback() will be called only in DMA
+ circular mode.
+ (#) Stop injected conversion using HAL_DFSDM_FilterInjectedStop(),
+ HAL_DFSDM_FilterInjectedStop_IT() or HAL_DFSDM_FilterInjectedStop_DMA().
+
+ *** Filter analog watchdog ***
+ ==============================
+ [..]
+ (#) Start filter analog watchdog using HAL_DFSDM_FilterAwdStart_IT().
+ (#) HAL_DFSDM_FilterAwdCallback() will be called if analog watchdog occurs.
+ (#) Stop filter analog watchdog using HAL_DFSDM_FilterAwdStop_IT().
+
+ *** Filter extreme detector ***
+ ===============================
+ [..]
+ (#) Start filter extreme detector using HAL_DFSDM_FilterExdStart().
+ (#) Get extreme detector maximum value using HAL_DFSDM_FilterGetExdMaxValue().
+ (#) Get extreme detector minimum value using HAL_DFSDM_FilterGetExdMinValue().
+ (#) Start filter extreme detector using HAL_DFSDM_FilterExdStop().
+
+ *** Filter conversion time ***
+ ==============================
+ [..]
+ (#) Get conversion time value using HAL_DFSDM_FilterGetConvTimeValue().
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+#ifdef HAL_DFSDM_MODULE_ENABLED
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup DFSDM DFSDM
+ * @brief DFSDM HAL driver module
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup DFSDM_Private_Define DFSDM Private Define
+ * @{
+ */
+#define DFSDM_CHCFGR1_CLK_DIV_OFFSET POSITION_VAL(DFSDM_CHCFGR1_CKOUTDIV)
+#define DFSDM_CHAWSCDR_BKSCD_OFFSET POSITION_VAL(DFSDM_CHAWSCDR_BKSCD)
+#define DFSDM_CHAWSCDR_FOSR_OFFSET POSITION_VAL(DFSDM_CHAWSCDR_AWFOSR)
+#define DFSDM_CHCFGR2_OFFSET_OFFSET POSITION_VAL(DFSDM_CHCFGR2_OFFSET)
+#define DFSDM_CHCFGR2_DTRBS_OFFSET POSITION_VAL(DFSDM_CHCFGR2_DTRBS)
+#define DFSDM_FLTFCR_FOSR_OFFSET POSITION_VAL(DFSDM_FLTFCR_FOSR)
+#define DFSDM_FLTCR1_MSB_RCH_OFFSET 8U
+#define DFSDM_FLTCR2_EXCH_OFFSET POSITION_VAL(DFSDM_FLTCR2_EXCH)
+#define DFSDM_FLTCR2_AWDCH_OFFSET POSITION_VAL(DFSDM_FLTCR2_AWDCH)
+#define DFSDM_FLTISR_CKABF_OFFSET POSITION_VAL(DFSDM_FLTISR_CKABF)
+#define DFSDM_FLTISR_SCDF_OFFSET POSITION_VAL(DFSDM_FLTISR_SCDF)
+#define DFSDM_FLTICR_CLRCKABF_OFFSET POSITION_VAL(DFSDM_FLTICR_CLRCKABF)
+#define DFSDM_FLTICR_CLRSCDF_OFFSET POSITION_VAL(DFSDM_FLTICR_CLRSCSDF)
+#define DFSDM_FLTRDATAR_DATA_OFFSET POSITION_VAL(DFSDM_FLTRDATAR_RDATA)
+#define DFSDM_FLTJDATAR_DATA_OFFSET POSITION_VAL(DFSDM_FLTJDATAR_JDATA)
+#define DFSDM_FLTAWHTR_THRESHOLD_OFFSET POSITION_VAL(DFSDM_FLTAWHTR_AWHT)
+#define DFSDM_FLTAWLTR_THRESHOLD_OFFSET POSITION_VAL(DFSDM_FLTAWLTR_AWLT)
+#define DFSDM_FLTEXMAX_DATA_OFFSET POSITION_VAL(DFSDM_FLTEXMAX_EXMAX)
+#define DFSDM_FLTEXMIN_DATA_OFFSET POSITION_VAL(DFSDM_FLTEXMIN_EXMIN)
+#define DFSDM_FLTCNVTIMR_DATA_OFFSET POSITION_VAL(DFSDM_FLTCNVTIMR_CNVCNT)
+#define DFSDM_FLTAWSR_HIGH_OFFSET POSITION_VAL(DFSDM_FLTAWSR_AWHTF)
+#define DFSDM_MSB_MASK 0xFFFF0000U
+#define DFSDM_LSB_MASK 0x0000FFFFU
+#define DFSDM_CKAB_TIMEOUT 5000U
+#define DFSDM1_CHANNEL_NUMBER 4U
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DFSDM_Private_Variables DFSDM Private Variables
+ * @{
+ */
+__IO uint32_t v_dfsdm1ChannelCounter = 0U;
+DFSDM_Channel_HandleTypeDef* a_dfsdm1ChannelHandle[DFSDM1_CHANNEL_NUMBER] = {NULL};
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup DFSDM_Private_Functions DFSDM Private Functions
+ * @{
+ */
+static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels);
+static uint32_t DFSDM_GetChannelFromInstance(DFSDM_Channel_TypeDef* Instance);
+static void DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+static void DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter);
+static void DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef* hdfsdm_filter);
+static void DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter);
+static void DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma);
+static void DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma);
+static void DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma);
+static void DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma);
+static void DFSDM_DMAError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DFSDM_Exported_Functions DFSDM Exported Functions
+ * @{
+ */
+
+/** @defgroup DFSDM_Exported_Functions_Group1_Channel Channel initialization and de-initialization functions
+ * @brief Channel initialization and de-initialization functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Channel initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the DFSDM channel.
+ (+) De-initialize the DFSDM channel.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the DFSDM channel according to the specified parameters
+ * in the DFSDM_ChannelInitTypeDef structure and initialize the associated handle.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ /* Check DFSDM Channel handle */
+ if(hdfsdm_channel == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+ assert_param(IS_FUNCTIONAL_STATE(hdfsdm_channel->Init.OutputClock.Activation));
+ assert_param(IS_DFSDM_CHANNEL_INPUT(hdfsdm_channel->Init.Input.Multiplexer));
+ assert_param(IS_DFSDM_CHANNEL_DATA_PACKING(hdfsdm_channel->Init.Input.DataPacking));
+ assert_param(IS_DFSDM_CHANNEL_INPUT_PINS(hdfsdm_channel->Init.Input.Pins));
+ assert_param(IS_DFSDM_CHANNEL_SERIAL_INTERFACE_TYPE(hdfsdm_channel->Init.SerialInterface.Type));
+ assert_param(IS_DFSDM_CHANNEL_SPI_CLOCK(hdfsdm_channel->Init.SerialInterface.SpiClock));
+ assert_param(IS_DFSDM_CHANNEL_FILTER_ORDER(hdfsdm_channel->Init.Awd.FilterOrder));
+ assert_param(IS_DFSDM_CHANNEL_FILTER_OVS_RATIO(hdfsdm_channel->Init.Awd.Oversampling));
+ assert_param(IS_DFSDM_CHANNEL_OFFSET(hdfsdm_channel->Init.Offset));
+ assert_param(IS_DFSDM_CHANNEL_RIGHT_BIT_SHIFT(hdfsdm_channel->Init.RightBitShift));
+
+ /* Check that channel has not been already initialized */
+ if(a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] != NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Call MSP init function */
+ HAL_DFSDM_ChannelMspInit(hdfsdm_channel);
+
+ /* Update the channel counter */
+ v_dfsdm1ChannelCounter++;
+
+ /* Configure output serial clock and enable global DFSDM interface only for first channel */
+ if(v_dfsdm1ChannelCounter == 1U)
+ {
+ assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK(hdfsdm_channel->Init.OutputClock.Selection));
+ /* Set the output serial clock source */
+ DFSDM1_Channel0->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTSRC);
+ DFSDM1_Channel0->CHCFGR1 |= hdfsdm_channel->Init.OutputClock.Selection;
+
+ /* Reset clock divider */
+ DFSDM1_Channel0->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTDIV);
+ if(hdfsdm_channel->Init.OutputClock.Activation == ENABLE)
+ {
+ assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(hdfsdm_channel->Init.OutputClock.Divider));
+ /* Set the output clock divider */
+ DFSDM1_Channel0->CHCFGR1 |= (uint32_t) ((hdfsdm_channel->Init.OutputClock.Divider - 1U) <<
+ DFSDM_CHCFGR1_CLK_DIV_OFFSET);
+ }
+
+ /* enable the DFSDM global interface */
+ DFSDM1_Channel0->CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN;
+ }
+
+ /* Set channel input parameters */
+ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DATPACK | DFSDM_CHCFGR1_DATMPX |
+ DFSDM_CHCFGR1_CHINSEL);
+ hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.Input.Multiplexer |
+ hdfsdm_channel->Init.Input.DataPacking |
+ hdfsdm_channel->Init.Input.Pins);
+
+ /* Set serial interface parameters */
+ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SITP | DFSDM_CHCFGR1_SPICKSEL);
+ hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.SerialInterface.Type |
+ hdfsdm_channel->Init.SerialInterface.SpiClock);
+
+ /* Set analog watchdog parameters */
+ hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_AWFORD | DFSDM_CHAWSCDR_AWFOSR);
+ hdfsdm_channel->Instance->CHAWSCDR |= (hdfsdm_channel->Init.Awd.FilterOrder |
+ ((hdfsdm_channel->Init.Awd.Oversampling - 1U) << DFSDM_CHAWSCDR_FOSR_OFFSET));
+
+ /* Set channel offset and right bit shift */
+ hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET | DFSDM_CHCFGR2_DTRBS);
+ hdfsdm_channel->Instance->CHCFGR2 |= (((uint32_t) hdfsdm_channel->Init.Offset << DFSDM_CHCFGR2_OFFSET_OFFSET) |
+ (hdfsdm_channel->Init.RightBitShift << DFSDM_CHCFGR2_DTRBS_OFFSET));
+
+ /* Enable DFSDM channel */
+ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CHEN;
+
+ /* Set DFSDM Channel to ready state */
+ hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_READY;
+
+ /* Store channel handle in DFSDM channel handle table */
+ a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = hdfsdm_channel;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De-initialize the DFSDM channel.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ /* Check DFSDM Channel handle */
+ if(hdfsdm_channel == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+ /* Check that channel has not been already deinitialized */
+ if(a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable the DFSDM channel */
+ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CHEN);
+
+ /* Update the channel counter */
+ v_dfsdm1ChannelCounter--;
+
+ /* Disable global DFSDM at deinit of last channel */
+ if(v_dfsdm1ChannelCounter == 0U)
+ {
+ DFSDM1_Channel0->CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN);
+ }
+
+ /* Call MSP deinit function */
+ HAL_DFSDM_ChannelMspDeInit(hdfsdm_channel);
+
+ /* Set DFSDM Channel in reset state */
+ hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_RESET;
+
+ /* Reset channel handle in DFSDM channel handle table */
+ a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = (DFSDM_Channel_HandleTypeDef *) NULL;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the DFSDM channel MSP.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_channel);
+ /* NOTE : This function should not be modified, when the function is needed,
+ the HAL_DFSDM_ChannelMspInit could be implemented in the user file.
+ */
+}
+
+/**
+ * @brief De-initialize the DFSDM channel MSP.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_channel);
+ /* NOTE : This function should not be modified, when the function is needed,
+ the HAL_DFSDM_ChannelMspDeInit could be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Exported_Functions_Group2_Channel Channel operation functions
+ * @brief Channel operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Channel operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Manage clock absence detector feature.
+ (+) Manage short circuit detector feature.
+ (+) Get analog watchdog value.
+ (+) Modify offset value.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function allows to start clock absence detection in polling mode.
+ * @note Same mode has to be used for all channels.
+ * @note If clock is not available on this channel during 5 seconds,
+ * clock absence detection will not be activated and function
+ * will return HAL_TIMEOUT error.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t channel;
+ uint32_t tickstart;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Get channel number from channel instance */
+ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Clear clock absence flag */
+ while((((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_OFFSET + channel)) & 1U) != 0U)
+ {
+ DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_OFFSET + channel));
+
+ /* Check the Timeout */
+ if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT)
+ {
+ /* Set timeout status */
+ status = HAL_TIMEOUT;
+ break;
+ }
+ }
+
+ if(status == HAL_OK)
+ {
+ /* Start clock absence detection */
+ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN;
+ }
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to poll for the clock absence detection.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @param Timeout : Timeout value in milliseconds.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelPollForCkab(DFSDM_Channel_HandleTypeDef *hdfsdm_channel,
+ uint32_t Timeout)
+{
+ uint32_t tickstart;
+ uint32_t channel;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Get channel number from channel instance */
+ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait clock absence detection */
+ while((((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_OFFSET + channel)) & 1U) == 0U)
+ {
+ /* Check the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+ {
+ /* Return timeout status */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear clock absence detection flag */
+ DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_OFFSET + channel));
+
+ /* Return function status */
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief This function allows to stop clock absence detection in polling mode.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t channel;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop clock absence detection */
+ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN);
+
+ /* Clear clock absence flag */
+ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+ DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_OFFSET + channel));
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start clock absence detection in interrupt mode.
+ * @note Same mode has to be used for all channels.
+ * @note If clock is not available on this channel during 5 seconds,
+ * clock absence detection will not be activated and function
+ * will return HAL_TIMEOUT error.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t channel;
+ __IO uint32_t count = DFSDM_CKAB_TIMEOUT * (SystemCoreClock / 36 / 1000);
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Get channel number from channel instance */
+ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+
+ /* Clear clock absence flag */
+ do
+ {
+ DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_OFFSET + channel));
+
+ if (count-- == 0)
+ {
+ /* Set timeout status */
+ status = HAL_TIMEOUT;
+ break;
+ }
+ }
+ while ((((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_OFFSET + channel)) & 1U) != 0U);
+
+ if(status == HAL_OK)
+ {
+ /* Activate clock absence detection interrupt */
+ DFSDM1_Filter0->FLTCR2 |= DFSDM_FLTCR2_CKABIE;
+
+ /* Start clock absence detection */
+ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN;
+ }
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Clock absence detection callback.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_ChannelCkabCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_channel);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DFSDM_ChannelCkabCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function allows to stop clock absence detection in interrupt mode.
+ * @note Interrupt will be disabled for all channels
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t channel;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop clock absence detection */
+ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN);
+
+ /* Clear clock absence flag */
+ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+ DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_OFFSET + channel));
+
+ /* Disable clock absence detection interrupt */
+ DFSDM1_Filter0->FLTCR2 &= ~(DFSDM_FLTCR2_CKABIE);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start short circuit detection in polling mode.
+ * @note Same mode has to be used for all channels
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @param Threshold : Short circuit detector threshold.
+ * This parameter must be a number between Min_Data = 0 and Max_Data = 255.
+ * @param BreakSignal : Break signals assigned to short circuit event.
+ * This parameter can be a values combination of @ref DFSDM_BreakSignals.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel,
+ uint32_t Threshold,
+ uint32_t BreakSignal)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+ assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold));
+ assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Configure threshold and break signals */
+ hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT);
+ hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_OFFSET) | \
+ Threshold);
+
+ /* Start short circuit detection */
+ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to poll for the short circuit detection.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @param Timeout : Timeout value in milliseconds.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelPollForScd(DFSDM_Channel_HandleTypeDef *hdfsdm_channel,
+ uint32_t Timeout)
+{
+ uint32_t tickstart;
+ uint32_t channel;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Get channel number from channel instance */
+ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait short circuit detection */
+ while(((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_SCDF) >> (DFSDM_FLTISR_SCDF_OFFSET + channel)) == 0U)
+ {
+ /* Check the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+ {
+ /* Return timeout status */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear short circuit detection flag */
+ DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_OFFSET + channel));
+
+ /* Return function status */
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief This function allows to stop short circuit detection in polling mode.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t channel;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop short circuit detection */
+ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN);
+
+ /* Clear short circuit detection flag */
+ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+ DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_OFFSET + channel));
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start short circuit detection in interrupt mode.
+ * @note Same mode has to be used for all channels
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @param Threshold : Short circuit detector threshold.
+ * This parameter must be a number between Min_Data = 0 and Max_Data = 255.
+ * @param BreakSignal : Break signals assigned to short circuit event.
+ * This parameter can be a values combination of @ref DFSDM_BreakSignals.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel,
+ uint32_t Threshold,
+ uint32_t BreakSignal)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+ assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold));
+ assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Activate short circuit detection interrupt */
+ DFSDM1_Filter0->FLTCR2 |= DFSDM_FLTCR2_SCDIE;
+
+ /* Configure threshold and break signals */
+ hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT);
+ hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_OFFSET) | \
+ Threshold);
+
+ /* Start short circuit detection */
+ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Short circuit detection callback.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_ChannelScdCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_channel);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DFSDM_ChannelScdCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function allows to stop short circuit detection in interrupt mode.
+ * @note Interrupt will be disabled for all channels
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t channel;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop short circuit detection */
+ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN);
+
+ /* Clear short circuit detection flag */
+ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+ DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_OFFSET + channel));
+
+ /* Disable short circuit detection interrupt */
+ DFSDM1_Filter0->FLTCR2 &= ~(DFSDM_FLTCR2_SCDIE);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to get channel analog watchdog value.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval Channel analog watchdog value.
+ */
+int16_t HAL_DFSDM_ChannelGetAwdValue(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ return (int16_t) hdfsdm_channel->Instance->CHWDATAR;
+}
+
+/**
+ * @brief This function allows to modify channel offset value.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @param Offset : DFSDM channel offset.
+ * This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_DFSDM_ChannelModifyOffset(DFSDM_Channel_HandleTypeDef *hdfsdm_channel,
+ int32_t Offset)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+ assert_param(IS_DFSDM_CHANNEL_OFFSET(Offset));
+
+ /* Check DFSDM channel state */
+ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Modify channel offset */
+ hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET);
+ hdfsdm_channel->Instance->CHCFGR2 |= ((uint32_t) Offset << DFSDM_CHCFGR2_OFFSET_OFFSET);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Exported_Functions_Group3_Channel Channel state function
+ * @brief Channel state function
+ *
+@verbatim
+ ==============================================================================
+ ##### Channel state function #####
+ ==============================================================================
+ [..] This section provides function allowing to:
+ (+) Get channel handle state.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function allows to get the current DFSDM channel handle state.
+ * @param hdfsdm_channel : DFSDM channel handle.
+ * @retval DFSDM channel state.
+ */
+HAL_DFSDM_Channel_StateTypeDef HAL_DFSDM_ChannelGetState(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+ /* Return DFSDM channel handle state */
+ return hdfsdm_channel->State;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Exported_Functions_Group1_Filter Filter initialization and de-initialization functions
+ * @brief Filter initialization and de-initialization functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Filter initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the DFSDM filter.
+ (+) De-initialize the DFSDM filter.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the DFSDM filter according to the specified parameters
+ * in the DFSDM_FilterInitTypeDef structure and initialize the associated handle.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Check DFSDM Channel handle */
+ if(hdfsdm_filter == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+ assert_param(IS_DFSDM_FILTER_REG_TRIGGER(hdfsdm_filter->Init.RegularParam.Trigger));
+ assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.FastMode));
+ assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.DmaMode));
+ assert_param(IS_DFSDM_FILTER_INJ_TRIGGER(hdfsdm_filter->Init.InjectedParam.Trigger));
+ assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.ScanMode));
+ assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.DmaMode));
+ assert_param(IS_DFSDM_FILTER_SINC_ORDER(hdfsdm_filter->Init.FilterParam.SincOrder));
+ assert_param(IS_DFSDM_FILTER_OVS_RATIO(hdfsdm_filter->Init.FilterParam.Oversampling));
+ assert_param(IS_DFSDM_FILTER_INTEGRATOR_OVS_RATIO(hdfsdm_filter->Init.FilterParam.IntOversampling));
+
+ /* Check parameters compatibility */
+ if((hdfsdm_filter->Instance == DFSDM1_Filter0) &&
+ ((hdfsdm_filter->Init.RegularParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER) ||
+ (hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER)))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Initialize DFSDM filter variables with default values */
+ hdfsdm_filter->RegularContMode = DFSDM_CONTINUOUS_CONV_OFF;
+ hdfsdm_filter->InjectedChannelsNbr = 1U;
+ hdfsdm_filter->InjConvRemaining = 1U;
+ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_NONE;
+
+ /* Call MSP init function */
+ HAL_DFSDM_FilterMspInit(hdfsdm_filter);
+
+ /* Set regular parameters */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC);
+ if(hdfsdm_filter->Init.RegularParam.FastMode == ENABLE)
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_FAST;
+ }
+ else
+ {
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_FAST);
+ }
+
+ if(hdfsdm_filter->Init.RegularParam.DmaMode == ENABLE)
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RDMAEN;
+ }
+ else
+ {
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RDMAEN);
+ }
+
+ /* Set injected parameters */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC | DFSDM_FLTCR1_JEXTEN | DFSDM_FLTCR1_JEXTSEL);
+ if(hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_EXT_TRIGGER)
+ {
+ assert_param(IS_DFSDM_FILTER_EXT_TRIG(hdfsdm_filter->Init.InjectedParam.ExtTrigger));
+ assert_param(IS_DFSDM_FILTER_EXT_TRIG_EDGE(hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge));
+ hdfsdm_filter->Instance->FLTCR1 |= (hdfsdm_filter->Init.InjectedParam.ExtTrigger);
+ }
+
+ if(hdfsdm_filter->Init.InjectedParam.ScanMode == ENABLE)
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSCAN;
+ }
+ else
+ {
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSCAN);
+ }
+
+ if(hdfsdm_filter->Init.InjectedParam.DmaMode == ENABLE)
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JDMAEN;
+ }
+ else
+ {
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JDMAEN);
+ }
+
+ /* Set filter parameters */
+ hdfsdm_filter->Instance->FLTFCR &= ~(DFSDM_FLTFCR_FORD | DFSDM_FLTFCR_FOSR | DFSDM_FLTFCR_IOSR);
+ hdfsdm_filter->Instance->FLTFCR |= (hdfsdm_filter->Init.FilterParam.SincOrder |
+ ((hdfsdm_filter->Init.FilterParam.Oversampling - 1U) << DFSDM_FLTFCR_FOSR_OFFSET) |
+ (hdfsdm_filter->Init.FilterParam.IntOversampling - 1U));
+
+ /* Store regular and injected triggers and injected scan mode*/
+ hdfsdm_filter->RegularTrigger = hdfsdm_filter->Init.RegularParam.Trigger;
+ hdfsdm_filter->InjectedTrigger = hdfsdm_filter->Init.InjectedParam.Trigger;
+ hdfsdm_filter->ExtTriggerEdge = hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge;
+ hdfsdm_filter->InjectedScanMode = hdfsdm_filter->Init.InjectedParam.ScanMode;
+
+ /* Enable DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+
+ /* Set DFSDM filter to ready state */
+ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De-initializes the DFSDM filter.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status.
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Check DFSDM filter handle */
+ if(hdfsdm_filter == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Disable the DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+
+ /* Call MSP deinit function */
+ HAL_DFSDM_FilterMspDeInit(hdfsdm_filter);
+
+ /* Set DFSDM filter in reset state */
+ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_RESET;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DFSDM filter MSP.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_filter);
+ /* NOTE : This function should not be modified, when the function is needed,
+ the HAL_DFSDM_FilterMspInit could be implemented in the user file.
+ */
+}
+
+/**
+ * @brief De-initializes the DFSDM filter MSP.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_filter);
+ /* NOTE : This function should not be modified, when the function is needed,
+ the HAL_DFSDM_FilterMspDeInit could be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Exported_Functions_Group2_Filter Filter control functions
+ * @brief Filter control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Filter control functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Select channel and enable/disable continuous mode for regular conversion.
+ (+) Select channels for injected conversion.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function allows to select channel and to enable/disable
+ * continuous mode for regular conversion.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Channel : Channel for regular conversion.
+ * This parameter can be a value of @ref DFSDM_Channel_Selection.
+ * @param ContinuousMode : Enable/disable continuous mode for regular conversion.
+ * This parameter can be a value of @ref DFSDM_ContinuousMode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterConfigRegChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t Channel,
+ uint32_t ContinuousMode)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+ assert_param(IS_DFSDM_REGULAR_CHANNEL(Channel));
+ assert_param(IS_DFSDM_CONTINUOUS_MODE(ContinuousMode));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) &&
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR))
+ {
+ /* Configure channel and continuous mode for regular conversion */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RCH | DFSDM_FLTCR1_RCONT);
+ if(ContinuousMode == DFSDM_CONTINUOUS_CONV_ON)
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) (((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET) |
+ DFSDM_FLTCR1_RCONT);
+ }
+ else
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) ((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET);
+ }
+ /* Store continuous mode information */
+ hdfsdm_filter->RegularContMode = ContinuousMode;
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to select channels for injected conversion.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Channel : Channels for injected conversion.
+ * This parameter can be a values combination of @ref DFSDM_Channel_Selection.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterConfigInjChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+ assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) &&
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR))
+ {
+ /* Configure channel for injected conversion */
+ hdfsdm_filter->Instance->FLTJCHGR = (uint32_t) (Channel & DFSDM_LSB_MASK);
+ /* Store number of injected channels */
+ hdfsdm_filter->InjectedChannelsNbr = DFSDM_GetInjChannelsNbr(Channel);
+ /* Update number of injected channels remaining */
+ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+ hdfsdm_filter->InjectedChannelsNbr : 1U;
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Exported_Functions_Group3_Filter Filter operation functions
+ * @brief Filter operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Filter operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion of regular/injected channel.
+ (+) Poll for the end of regular/injected conversion.
+ (+) Stop conversion of regular/injected channel.
+ (+) Start conversion of regular/injected channel and enable interrupt.
+ (+) Call the callback functions at the end of regular/injected conversions.
+ (+) Stop conversion of regular/injected channel and disable interrupt.
+ (+) Start conversion of regular/injected channel and enable DMA transfer.
+ (+) Stop conversion of regular/injected channel and disable DMA transfer.
+ (+) Start analog watchdog and enable interrupt.
+ (+) Call the callback function when analog watchdog occurs.
+ (+) Stop analog watchdog and disable interrupt.
+ (+) Start extreme detector.
+ (+) Stop extreme detector.
+ (+) Get result of regular channel conversion.
+ (+) Get result of injected channel conversion.
+ (+) Get extreme detector maximum and minimum values.
+ (+) Get conversion time.
+ (+) Handle DFSDM interrupt request.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function allows to start regular conversion in polling mode.
+ * @note This function should be called only when DFSDM filter instance is
+ * in idle state or if injected conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ))
+ {
+ /* Start regular conversion */
+ DFSDM_RegConvStart(hdfsdm_filter);
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to poll for the end of regular conversion.
+ * @note This function should be called only if regular conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Timeout : Timeout value in milliseconds.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterPollForRegConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t Timeout)
+{
+ uint32_t tickstart;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait end of regular conversion */
+ while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_REOCF) != DFSDM_FLTISR_REOCF)
+ {
+ /* Check the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+ {
+ /* Return timeout status */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Check if overrun occurs */
+ if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_ROVRF) == DFSDM_FLTISR_ROVRF)
+ {
+ /* Update error code and call error callback */
+ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN;
+ HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+
+ /* Clear regular overrun flag */
+ hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF;
+ }
+ /* Update DFSDM filter state only if not continuous conversion and SW trigger */
+ if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+ (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER))
+ {
+ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \
+ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ;
+ }
+ /* Return function status */
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief This function allows to stop regular conversion in polling mode.
+ * @note This function should be called only if regular conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop regular conversion */
+ DFSDM_RegConvStop(hdfsdm_filter);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start regular conversion in interrupt mode.
+ * @note This function should be called only when DFSDM filter instance is
+ * in idle state or if injected conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ))
+ {
+ /* Enable interrupts for regular conversions */
+ hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE);
+
+ /* Start regular conversion */
+ DFSDM_RegConvStart(hdfsdm_filter);
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to stop regular conversion in interrupt mode.
+ * @note This function should be called only if regular conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Disable interrupts for regular conversions */
+ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE);
+
+ /* Stop regular conversion */
+ DFSDM_RegConvStop(hdfsdm_filter);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start regular conversion in DMA mode.
+ * @note This function should be called only when DFSDM filter instance is
+ * in idle state or if injected conversion is ongoing.
+ * Please note that data on buffer will contain signed regular conversion
+ * value on 24 most significant bits and corresponding channel on 3 least
+ * significant bits.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param pData : The destination buffer address.
+ * @param Length : The length of data to be transferred from DFSDM filter to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ int32_t *pData,
+ uint32_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check destination address and length */
+ if((pData == NULL) || (Length == 0U))
+ {
+ status = HAL_ERROR;
+ }
+ /* Check that DMA is enabled for regular conversion */
+ else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN)
+ {
+ status = HAL_ERROR;
+ }
+ /* Check parameters compatibility */
+ else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+ (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+ (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \
+ (Length != 1U))
+ {
+ status = HAL_ERROR;
+ }
+ else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+ (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+ (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR))
+ {
+ status = HAL_ERROR;
+ }
+ /* Check DFSDM filter state */
+ else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ))
+ {
+ /* Set callbacks on DMA handler */
+ hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt;
+ hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError;
+ hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\
+ DFSDM_DMARegularHalfConvCplt : NULL;
+
+ /* Start DMA in interrupt mode */
+ if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)&hdfsdm_filter->Instance->FLTRDATAR, \
+ (uint32_t) pData, Length) != HAL_OK)
+ {
+ /* Set DFSDM filter in error state */
+ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Start regular conversion */
+ DFSDM_RegConvStart(hdfsdm_filter);
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start regular conversion in DMA mode and to get
+ * only the 16 most significant bits of conversion.
+ * @note This function should be called only when DFSDM filter instance is
+ * in idle state or if injected conversion is ongoing.
+ * Please note that data on buffer will contain signed 16 most significant
+ * bits of regular conversion.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param pData : The destination buffer address.
+ * @param Length : The length of data to be transferred from DFSDM filter to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ int16_t *pData,
+ uint32_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check destination address and length */
+ if((pData == NULL) || (Length == 0U))
+ {
+ status = HAL_ERROR;
+ }
+ /* Check that DMA is enabled for regular conversion */
+ else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN)
+ {
+ status = HAL_ERROR;
+ }
+ /* Check parameters compatibility */
+ else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+ (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+ (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \
+ (Length != 1U))
+ {
+ status = HAL_ERROR;
+ }
+ else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+ (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+ (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR))
+ {
+ status = HAL_ERROR;
+ }
+ /* Check DFSDM filter state */
+ else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ))
+ {
+ /* Set callbacks on DMA handler */
+ hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt;
+ hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError;
+ hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\
+ DFSDM_DMARegularHalfConvCplt : NULL;
+
+ /* Start DMA in interrupt mode */
+ if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)(&hdfsdm_filter->Instance->FLTRDATAR) + 2U, \
+ (uint32_t) pData, Length) != HAL_OK)
+ {
+ /* Set DFSDM filter in error state */
+ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Start regular conversion */
+ DFSDM_RegConvStart(hdfsdm_filter);
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to stop regular conversion in DMA mode.
+ * @note This function should be called only if regular conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop current DMA transfer */
+ if(HAL_DMA_Abort(hdfsdm_filter->hdmaReg) != HAL_OK)
+ {
+ /* Set DFSDM filter in error state */
+ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop regular conversion */
+ DFSDM_RegConvStop(hdfsdm_filter);
+ }
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to get regular conversion value.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Channel : Corresponding channel of regular conversion.
+ * @retval Regular conversion value
+ */
+int32_t HAL_DFSDM_FilterGetRegularValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t *Channel)
+{
+ uint32_t reg = 0U;
+ int32_t value = 0U;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+ assert_param(Channel != NULL);
+
+ /* Get value of data register for regular channel */
+ reg = hdfsdm_filter->Instance->FLTRDATAR;
+
+ /* Extract channel and regular conversion value */
+ *Channel = (reg & DFSDM_FLTRDATAR_RDATACH);
+ value = ((reg & DFSDM_FLTRDATAR_RDATA) >> DFSDM_FLTRDATAR_DATA_OFFSET);
+
+ /* return regular conversion value */
+ return value;
+}
+
+/**
+ * @brief This function allows to start injected conversion in polling mode.
+ * @note This function should be called only when DFSDM filter instance is
+ * in idle state or if regular conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG))
+ {
+ /* Start injected conversion */
+ DFSDM_InjConvStart(hdfsdm_filter);
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to poll for the end of injected conversion.
+ * @note This function should be called only if injected conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Timeout : Timeout value in milliseconds.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterPollForInjConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t Timeout)
+{
+ uint32_t tickstart;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait end of injected conversions */
+ while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JEOCF) != DFSDM_FLTISR_JEOCF)
+ {
+ /* Check the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+ {
+ /* Return timeout status */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Check if overrun occurs */
+ if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JOVRF) == DFSDM_FLTISR_JOVRF)
+ {
+ /* Update error code and call error callback */
+ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN;
+ HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+
+ /* Clear injected overrun flag */
+ hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF;
+ }
+
+ /* Update remaining injected conversions */
+ hdfsdm_filter->InjConvRemaining--;
+ if(hdfsdm_filter->InjConvRemaining == 0U)
+ {
+ /* Update DFSDM filter state only if trigger is software */
+ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+ {
+ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \
+ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG;
+ }
+
+ /* end of injected sequence, reset the value */
+ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+ hdfsdm_filter->InjectedChannelsNbr : 1U;
+ }
+
+ /* Return function status */
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief This function allows to stop injected conversion in polling mode.
+ * @note This function should be called only if injected conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop injected conversion */
+ DFSDM_InjConvStop(hdfsdm_filter);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start injected conversion in interrupt mode.
+ * @note This function should be called only when DFSDM filter instance is
+ * in idle state or if regular conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG))
+ {
+ /* Enable interrupts for injected conversions */
+ hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE);
+
+ /* Start injected conversion */
+ DFSDM_InjConvStart(hdfsdm_filter);
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to stop injected conversion in interrupt mode.
+ * @note This function should be called only if injected conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Disable interrupts for injected conversions */
+ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE);
+
+ /* Stop injected conversion */
+ DFSDM_InjConvStop(hdfsdm_filter);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start injected conversion in DMA mode.
+ * @note This function should be called only when DFSDM filter instance is
+ * in idle state or if regular conversion is ongoing.
+ * Please note that data on buffer will contain signed injected conversion
+ * value on 24 most significant bits and corresponding channel on 3 least
+ * significant bits.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param pData : The destination buffer address.
+ * @param Length : The length of data to be transferred from DFSDM filter to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ int32_t *pData,
+ uint32_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check destination address and length */
+ if((pData == NULL) || (Length == 0U))
+ {
+ status = HAL_ERROR;
+ }
+ /* Check that DMA is enabled for injected conversion */
+ else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN)
+ {
+ status = HAL_ERROR;
+ }
+ /* Check parameters compatibility */
+ else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+ (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \
+ (Length > hdfsdm_filter->InjConvRemaining))
+ {
+ status = HAL_ERROR;
+ }
+ else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+ (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR))
+ {
+ status = HAL_ERROR;
+ }
+ /* Check DFSDM filter state */
+ else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG))
+ {
+ /* Set callbacks on DMA handler */
+ hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt;
+ hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError;
+ hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\
+ DFSDM_DMAInjectedHalfConvCplt : NULL;
+
+ /* Start DMA in interrupt mode */
+ if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)&hdfsdm_filter->Instance->FLTJDATAR, \
+ (uint32_t) pData, Length) != HAL_OK)
+ {
+ /* Set DFSDM filter in error state */
+ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Start injected conversion */
+ DFSDM_InjConvStart(hdfsdm_filter);
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start injected conversion in DMA mode and to get
+ * only the 16 most significant bits of conversion.
+ * @note This function should be called only when DFSDM filter instance is
+ * in idle state or if regular conversion is ongoing.
+ * Please note that data on buffer will contain signed 16 most significant
+ * bits of injected conversion.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param pData : The destination buffer address.
+ * @param Length : The length of data to be transferred from DFSDM filter to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ int16_t *pData,
+ uint32_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check destination address and length */
+ if((pData == NULL) || (Length == 0U))
+ {
+ status = HAL_ERROR;
+ }
+ /* Check that DMA is enabled for injected conversion */
+ else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN)
+ {
+ status = HAL_ERROR;
+ }
+ /* Check parameters compatibility */
+ else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+ (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \
+ (Length > hdfsdm_filter->InjConvRemaining))
+ {
+ status = HAL_ERROR;
+ }
+ else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+ (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR))
+ {
+ status = HAL_ERROR;
+ }
+ /* Check DFSDM filter state */
+ else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG))
+ {
+ /* Set callbacks on DMA handler */
+ hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt;
+ hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError;
+ hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\
+ DFSDM_DMAInjectedHalfConvCplt : NULL;
+
+ /* Start DMA in interrupt mode */
+ if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)(&hdfsdm_filter->Instance->FLTJDATAR) + 2U, \
+ (uint32_t) pData, Length) != HAL_OK)
+ {
+ /* Set DFSDM filter in error state */
+ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Start injected conversion */
+ DFSDM_InjConvStart(hdfsdm_filter);
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to stop injected conversion in DMA mode.
+ * @note This function should be called only if injected conversion is ongoing.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \
+ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop current DMA transfer */
+ if(HAL_DMA_Abort(hdfsdm_filter->hdmaInj) != HAL_OK)
+ {
+ /* Set DFSDM filter in error state */
+ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Stop regular conversion */
+ DFSDM_InjConvStop(hdfsdm_filter);
+ }
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to get injected conversion value.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Channel : Corresponding channel of injected conversion.
+ * @retval Injected conversion value
+ */
+int32_t HAL_DFSDM_FilterGetInjectedValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t *Channel)
+{
+ uint32_t reg = 0U;
+ int32_t value = 0U;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+ assert_param(Channel != NULL);
+
+ /* Get value of data register for injected channel */
+ reg = hdfsdm_filter->Instance->FLTJDATAR;
+
+ /* Extract channel and injected conversion value */
+ *Channel = (reg & DFSDM_FLTJDATAR_JDATACH);
+ value = ((reg & DFSDM_FLTJDATAR_JDATA) >> DFSDM_FLTJDATAR_DATA_OFFSET);
+
+ /* return regular conversion value */
+ return value;
+}
+
+/**
+ * @brief This function allows to start filter analog watchdog in interrupt mode.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param awdParam : DFSDM filter analog watchdog parameters.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterAwdStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ DFSDM_Filter_AwdParamTypeDef *awdParam)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+ assert_param(IS_DFSDM_FILTER_AWD_DATA_SOURCE(awdParam->DataSource));
+ assert_param(IS_DFSDM_INJECTED_CHANNEL(awdParam->Channel));
+ assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->HighThreshold));
+ assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->LowThreshold));
+ assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->HighBreakSignal));
+ assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->LowBreakSignal));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Set analog watchdog data source */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL);
+ hdfsdm_filter->Instance->FLTCR1 |= awdParam->DataSource;
+
+ /* Set thresholds and break signals */
+ hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH);
+ hdfsdm_filter->Instance->FLTAWHTR |= (((uint32_t) awdParam->HighThreshold << DFSDM_FLTAWHTR_THRESHOLD_OFFSET) | \
+ awdParam->HighBreakSignal);
+ hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL);
+ hdfsdm_filter->Instance->FLTAWLTR |= (((uint32_t) awdParam->LowThreshold << DFSDM_FLTAWLTR_THRESHOLD_OFFSET) | \
+ awdParam->LowBreakSignal);
+
+ /* Set channels and interrupt for analog watchdog */
+ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH);
+ hdfsdm_filter->Instance->FLTCR2 |= (((awdParam->Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_AWDCH_OFFSET) | \
+ DFSDM_FLTCR2_AWDIE);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to stop filter analog watchdog in interrupt mode.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterAwdStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Reset channels for analog watchdog and deactivate interrupt */
+ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH | DFSDM_FLTCR2_AWDIE);
+
+ /* Clear all analog watchdog flags */
+ hdfsdm_filter->Instance->FLTAWCFR = (DFSDM_FLTAWCFR_CLRAWHTF | DFSDM_FLTAWCFR_CLRAWLTF);
+
+ /* Reset thresholds and break signals */
+ hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH);
+ hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL);
+
+ /* Reset analog watchdog data source */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to start extreme detector feature.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Channel : Channels where extreme detector is enabled.
+ * This parameter can be a values combination of @ref DFSDM_Channel_Selection.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterExdStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+ assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Set channels for extreme detector */
+ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH);
+ hdfsdm_filter->Instance->FLTCR2 |= ((Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_EXCH_OFFSET);
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to stop extreme detector feature.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DFSDM_FilterExdStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ __IO uint32_t reg1;
+ __IO uint32_t reg2;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Check DFSDM filter state */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \
+ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR))
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Reset channels for extreme detector */
+ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH);
+
+ /* Clear extreme detector values */
+ reg1 = hdfsdm_filter->Instance->FLTEXMAX;
+ reg2 = hdfsdm_filter->Instance->FLTEXMIN;
+ UNUSED(reg1); /* To avoid GCC warning */
+ UNUSED(reg2); /* To avoid GCC warning */
+ }
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief This function allows to get extreme detector maximum value.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Channel : Corresponding channel.
+ * @retval Extreme detector maximum value
+ * This value is between Min_Data = -8388608 and Max_Data = 8388607.
+ */
+int32_t HAL_DFSDM_FilterGetExdMaxValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t *Channel)
+{
+ uint32_t reg = 0U;
+ int32_t value = 0U;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+ assert_param(Channel != NULL);
+
+ /* Get value of extreme detector maximum register */
+ reg = hdfsdm_filter->Instance->FLTEXMAX;
+
+ /* Extract channel and extreme detector maximum value */
+ *Channel = (reg & DFSDM_FLTEXMAX_EXMAXCH);
+ value = ((reg & DFSDM_FLTEXMAX_EXMAX) >> DFSDM_FLTEXMAX_DATA_OFFSET);
+
+ /* return extreme detector maximum value */
+ return value;
+}
+
+/**
+ * @brief This function allows to get extreme detector minimum value.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Channel : Corresponding channel.
+ * @retval Extreme detector minimum value
+ * This value is between Min_Data = -8388608 and Max_Data = 8388607.
+ */
+int32_t HAL_DFSDM_FilterGetExdMinValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t *Channel)
+{
+ uint32_t reg = 0U;
+ int32_t value = 0U;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+ assert_param(Channel != NULL);
+
+ /* Get value of extreme detector minimum register */
+ reg = hdfsdm_filter->Instance->FLTEXMIN;
+
+ /* Extract channel and extreme detector minimum value */
+ *Channel = (reg & DFSDM_FLTEXMIN_EXMINCH);
+ value = ((reg & DFSDM_FLTEXMIN_EXMIN) >> DFSDM_FLTEXMIN_DATA_OFFSET);
+
+ /* return extreme detector minimum value */
+ return value;
+}
+
+/**
+ * @brief This function allows to get conversion time value.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval Conversion time value
+ * @note To get time in second, this value has to be divided by DFSDM clock frequency.
+ */
+uint32_t HAL_DFSDM_FilterGetConvTimeValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ uint32_t reg = 0U;
+ uint32_t value = 0U;
+
+ /* Check parameters */
+ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+ /* Get value of conversion timer register */
+ reg = hdfsdm_filter->Instance->FLTCNVTIMR;
+
+ /* Extract conversion time value */
+ value = ((reg & DFSDM_FLTCNVTIMR_CNVCNT) >> DFSDM_FLTCNVTIMR_DATA_OFFSET);
+
+ /* return extreme detector minimum value */
+ return value;
+}
+
+/**
+ * @brief This function handles the DFSDM interrupts.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+void HAL_DFSDM_IRQHandler(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Check if overrun occurs during regular conversion */
+ if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_ROVRF) != 0U) && \
+ ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_ROVRIE) != 0U))
+ {
+ /* Clear regular overrun flag */
+ hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF;
+
+ /* Update error code */
+ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN;
+
+ /* Call error callback */
+ HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+ }
+ /* Check if overrun occurs during injected conversion */
+ else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JOVRF) != 0U) && \
+ ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_JOVRIE) != 0U))
+ {
+ /* Clear injected overrun flag */
+ hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF;
+
+ /* Update error code */
+ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN;
+
+ /* Call error callback */
+ HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+ }
+ /* Check if end of regular conversion */
+ else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_REOCF) != 0U) && \
+ ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_REOCIE) != 0U))
+ {
+ /* Call regular conversion complete callback */
+ HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter);
+
+ /* End of conversion if mode is not continuous and software trigger */
+ if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+ (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER))
+ {
+ /* Disable interrupts for regular conversions */
+ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE);
+
+ /* Update DFSDM filter state */
+ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \
+ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ;
+ }
+ }
+ /* Check if end of injected conversion */
+ else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JEOCF) != 0U) && \
+ ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_JEOCIE) != 0U))
+ {
+ /* Call injected conversion complete callback */
+ HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter);
+
+ /* Update remaining injected conversions */
+ hdfsdm_filter->InjConvRemaining--;
+ if(hdfsdm_filter->InjConvRemaining == 0U)
+ {
+ /* End of conversion if trigger is software */
+ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+ {
+ /* Disable interrupts for injected conversions */
+ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE);
+
+ /* Update DFSDM filter state */
+ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \
+ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG;
+ }
+ /* end of injected sequence, reset the value */
+ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+ hdfsdm_filter->InjectedChannelsNbr : 1U;
+ }
+ }
+ /* Check if analog watchdog occurs */
+ else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_AWDF) != 0U) && \
+ ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_AWDIE) != 0U))
+ {
+ uint32_t reg = 0U;
+ uint32_t threshold = 0U;
+ uint32_t channel = 0U;
+
+ /* Get channel and threshold */
+ reg = hdfsdm_filter->Instance->FLTAWSR;
+ threshold = ((reg & DFSDM_FLTAWSR_AWLTF) != 0U) ? DFSDM_AWD_LOW_THRESHOLD : DFSDM_AWD_HIGH_THRESHOLD;
+ if(threshold == DFSDM_AWD_HIGH_THRESHOLD)
+ {
+ reg = reg >> DFSDM_FLTAWSR_HIGH_OFFSET;
+ }
+ while((reg & 1U) == 0U)
+ {
+ channel++;
+ reg = reg >> 1U;
+ }
+ /* Clear analog watchdog flag */
+ hdfsdm_filter->Instance->FLTAWCFR = (threshold == DFSDM_AWD_HIGH_THRESHOLD) ? \
+ (1U << (DFSDM_FLTAWSR_HIGH_OFFSET + channel)) : \
+ (1U << channel);
+
+ /* Call analog watchdog callback */
+ HAL_DFSDM_FilterAwdCallback(hdfsdm_filter, channel, threshold);
+ }
+ /* Check if clock absence occurs */
+ else if((hdfsdm_filter->Instance == DFSDM1_Filter0) && \
+ ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) != 0U) && \
+ ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_CKABIE) != 0U))
+ {
+ uint32_t reg = 0U;
+ uint32_t channel = 0U;
+
+ reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) >> DFSDM_FLTISR_CKABF_OFFSET);
+
+ while(channel < DFSDM1_CHANNEL_NUMBER)
+ {
+ /* Check if flag is set and corresponding channel is enabled */
+ if(((reg & 1U) != 0U) && (a_dfsdm1ChannelHandle[channel] != NULL))
+ {
+ /* Check clock absence has been enabled for this channel */
+ if((a_dfsdm1ChannelHandle[channel]->Instance->CHCFGR1 & DFSDM_CHCFGR1_CKABEN) != 0U)
+ {
+ /* Clear clock absence flag */
+ hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_OFFSET + channel));
+
+ /* Call clock absence callback */
+ HAL_DFSDM_ChannelCkabCallback(a_dfsdm1ChannelHandle[channel]);
+ }
+ }
+ channel++;
+ reg = reg >> 1U;
+ }
+ }
+ /* Check if short circuit detection occurs */
+ else if((hdfsdm_filter->Instance == DFSDM1_Filter0) && \
+ ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) != 0U) && \
+ ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_SCDIE) != 0U))
+ {
+ uint32_t reg = 0U;
+ uint32_t channel = 0U;
+
+ /* Get channel */
+ reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) >> DFSDM_FLTISR_SCDF_OFFSET);
+ while((reg & 1U) == 0U)
+ {
+ channel++;
+ reg = reg >> 1U;
+ }
+
+ /* Clear short circuit detection flag */
+ hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCDF_OFFSET + channel));
+
+ /* Call short circuit detection callback */
+ HAL_DFSDM_ChannelScdCallback(a_dfsdm1ChannelHandle[channel]);
+ }
+}
+
+/**
+ * @brief Regular conversion complete callback.
+ * @note In interrupt mode, user has to read conversion value in this function
+ * using HAL_DFSDM_FilterGetRegularValue.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_filter);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DFSDM_FilterRegConvCpltCallback could be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Half regular conversion complete callback.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_filter);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DFSDM_FilterRegConvHalfCpltCallback could be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Injected conversion complete callback.
+ * @note In interrupt mode, user has to read conversion value in this function
+ * using HAL_DFSDM_FilterGetInjectedValue.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_FilterInjConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_filter);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DFSDM_FilterInjConvCpltCallback could be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Half injected conversion complete callback.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_FilterInjConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_filter);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DFSDM_FilterInjConvHalfCpltCallback could be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Filter analog watchdog callback.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @param Channel : Corresponding channel.
+ * @param Threshold : Low or high threshold has been reached.
+ * @retval None
+ */
+__weak void HAL_DFSDM_FilterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t Channel, uint32_t Threshold)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_filter);
+ UNUSED(Channel);
+ UNUSED(Threshold);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DFSDM_FilterAwdCallback could be implemented in the user file.
+ */
+}
+
+/**
+ * @brief Error callback.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+__weak void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdfsdm_filter);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_DFSDM_FilterErrorCallback could be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Exported_Functions_Group4_Filter Filter state functions
+ * @brief Filter state functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Filter state functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Get the DFSDM filter state.
+ (+) Get the DFSDM filter error.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function allows to get the current DFSDM filter handle state.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval DFSDM filter state.
+ */
+HAL_DFSDM_Filter_StateTypeDef HAL_DFSDM_FilterGetState(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ /* Return DFSDM filter handle state */
+ return hdfsdm_filter->State;
+}
+
+/**
+ * @brief This function allows to get the current DFSDM filter error.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval DFSDM filter error code.
+ */
+uint32_t HAL_DFSDM_FilterGetError(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+ return hdfsdm_filter->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DFSDM_Private_Functions DFSDM Private Functions
+ * @{
+ */
+
+/**
+ * @brief DMA half transfer complete callback for regular conversion.
+ * @param hdma : DMA handle.
+ * @retval None
+ */
+static void DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Get DFSDM filter handle */
+ DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Call regular half conversion complete callback */
+ HAL_DFSDM_FilterRegConvHalfCpltCallback(hdfsdm_filter);
+}
+
+/**
+ * @brief DMA transfer complete callback for regular conversion.
+ * @param hdma : DMA handle.
+ * @retval None
+ */
+static void DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Get DFSDM filter handle */
+ DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Call regular conversion complete callback */
+ HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter);
+}
+
+/**
+ * @brief DMA half transfer complete callback for injected conversion.
+ * @param hdma : DMA handle.
+ * @retval None
+ */
+static void DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Get DFSDM filter handle */
+ DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Call injected half conversion complete callback */
+ HAL_DFSDM_FilterInjConvHalfCpltCallback(hdfsdm_filter);
+}
+
+/**
+ * @brief DMA transfer complete callback for injected conversion.
+ * @param hdma : DMA handle.
+ * @retval None
+ */
+static void DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Get DFSDM filter handle */
+ DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Call injected conversion complete callback */
+ HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter);
+}
+
+/**
+ * @brief DMA error callback.
+ * @param hdma : DMA handle.
+ * @retval None
+ */
+static void DFSDM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ /* Get DFSDM filter handle */
+ DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Update error code */
+ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_DMA;
+
+ /* Call error callback */
+ HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+}
+
+/**
+ * @brief This function allows to get the number of injected channels.
+ * @param Channels : bitfield of injected channels.
+ * @retval Number of injected channels.
+ */
+static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels)
+{
+ uint32_t nbChannels = 0U;
+ uint32_t tmp;
+
+ /* Get the number of channels from bitfield */
+ tmp = (uint32_t) (Channels & DFSDM_LSB_MASK);
+ while(tmp != 0U)
+ {
+ if((tmp & 1U) != 0U)
+ {
+ nbChannels++;
+ }
+ tmp = (uint32_t) (tmp >> 1U);
+ }
+ return nbChannels;
+}
+
+/**
+ * @brief This function allows to get the channel number from channel instance.
+ * @param Instance : DFSDM channel instance.
+ * @retval Channel number.
+ */
+static uint32_t DFSDM_GetChannelFromInstance(DFSDM_Channel_TypeDef* Instance)
+{
+ uint32_t channel = 0xFFU;
+
+ /* Get channel from instance */
+ if(Instance == DFSDM1_Channel0)
+ {
+ channel = 0U;
+ }
+ else if(Instance == DFSDM1_Channel1)
+ {
+ channel = 1U;
+ }
+ else if(Instance == DFSDM1_Channel2)
+ {
+ channel = 2U;
+ }
+ else if(Instance == DFSDM1_Channel3)
+ {
+ channel = 3U;
+ }
+
+ return channel;
+}
+
+/**
+ * @brief This function allows to really start regular conversion.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+static void DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
+{
+ /* Check regular trigger */
+ if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)
+ {
+ /* Software start of regular conversion */
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART;
+ }
+ else /* synchronous trigger */
+ {
+ /* Disable DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+
+ /* Set RSYNC bit in DFSDM_FLTCR1 register */
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSYNC;
+
+ /* Enable DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+
+ /* If injected conversion was in progress, restart it */
+ if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)
+ {
+ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART;
+ }
+ /* Update remaining injected conversions */
+ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+ hdfsdm_filter->InjectedChannelsNbr : 1U;
+ }
+ }
+ /* Update DFSDM filter state */
+ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \
+ HAL_DFSDM_FILTER_STATE_REG : HAL_DFSDM_FILTER_STATE_REG_INJ;
+}
+
+/**
+ * @brief This function allows to really stop regular conversion.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+static void DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
+{
+ /* Disable DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+
+ /* If regular trigger was synchronous, reset RSYNC bit in DFSDM_FLTCR1 register */
+ if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SYNC_TRIGGER)
+ {
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC);
+ }
+
+ /* Enable DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+
+ /* If injected conversion was in progress, restart it */
+ if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ)
+ {
+ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART;
+ }
+ /* Update remaining injected conversions */
+ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+ hdfsdm_filter->InjectedChannelsNbr : 1U;
+ }
+
+ /* Update DFSDM filter state */
+ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \
+ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ;
+}
+
+/**
+ * @brief This function allows to really start injected conversion.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+static void DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
+{
+ /* Check injected trigger */
+ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+ {
+ /* Software start of injected conversion */
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART;
+ }
+ else /* external or synchronous trigger */
+ {
+ /* Disable DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+
+ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER)
+ {
+ /* Set JSYNC bit in DFSDM_FLTCR1 register */
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSYNC;
+ }
+ else /* external trigger */
+ {
+ /* Set JEXTEN[1:0] bits in DFSDM_FLTCR1 register */
+ hdfsdm_filter->Instance->FLTCR1 |= hdfsdm_filter->ExtTriggerEdge;
+ }
+
+ /* Enable DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+
+ /* If regular conversion was in progress, restart it */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) && \
+ (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER))
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART;
+ }
+ }
+ /* Update DFSDM filter state */
+ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \
+ HAL_DFSDM_FILTER_STATE_INJ : HAL_DFSDM_FILTER_STATE_REG_INJ;
+}
+
+/**
+ * @brief This function allows to really stop injected conversion.
+ * @param hdfsdm_filter : DFSDM filter handle.
+ * @retval None
+ */
+static void DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
+{
+ /* Disable DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+
+ /* If injected trigger was synchronous, reset JSYNC bit in DFSDM_FLTCR1 register */
+ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER)
+ {
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC);
+ }
+ else if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_EXT_TRIGGER)
+ {
+ /* Reset JEXTEN[1:0] bits in DFSDM_FLTCR1 register */
+ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JEXTEN);
+ }
+
+ /* Enable DFSDM filter */
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+
+ /* If regular conversion was in progress, restart it */
+ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ) && \
+ (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER))
+ {
+ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART;
+ }
+
+ /* Update remaining injected conversions */
+ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+ hdfsdm_filter->InjectedChannelsNbr : 1U;
+
+ /* Update DFSDM filter state */
+ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \
+ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG;
+}
+
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,691 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dfsdm.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of DFSDM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DFSDM_H
+#define __STM32F4xx_HAL_DFSDM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DFSDM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DFSDM_Exported_Types DFSDM Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL DFSDM Channel states definition
+ */
+typedef enum
+{
+ HAL_DFSDM_CHANNEL_STATE_RESET = 0x00U, /*!< DFSDM channel not initialized */
+ HAL_DFSDM_CHANNEL_STATE_READY = 0x01U, /*!< DFSDM channel initialized and ready for use */
+ HAL_DFSDM_CHANNEL_STATE_ERROR = 0xFFU /*!< DFSDM channel state error */
+}HAL_DFSDM_Channel_StateTypeDef;
+
+/**
+ * @brief DFSDM channel output clock structure definition
+ */
+typedef struct
+{
+ FunctionalState Activation; /*!< Output clock enable/disable */
+ uint32_t Selection; /*!< Output clock is system clock or audio clock.
+ This parameter can be a value of @ref DFSDM_Channel_OuputClock */
+ uint32_t Divider; /*!< Output clock divider.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 256 */
+}DFSDM_Channel_OutputClockTypeDef;
+
+/**
+ * @brief DFSDM channel input structure definition
+ */
+typedef struct
+{
+ uint32_t Multiplexer; /*!< Input is external serial inputs or internal register.
+ This parameter can be a value of @ref DFSDM_Channel_InputMultiplexer */
+ uint32_t DataPacking; /*!< Standard, interleaved or dual mode for internal register.
+ This parameter can be a value of @ref DFSDM_Channel_DataPacking */
+ uint32_t Pins; /*!< Input pins are taken from same or following channel.
+ This parameter can be a value of @ref DFSDM_Channel_InputPins */
+}DFSDM_Channel_InputTypeDef;
+
+/**
+ * @brief DFSDM channel serial interface structure definition
+ */
+typedef struct
+{
+ uint32_t Type; /*!< SPI or Manchester modes.
+ This parameter can be a value of @ref DFSDM_Channel_SerialInterfaceType */
+ uint32_t SpiClock; /*!< SPI clock select (external or internal with different sampling point).
+ This parameter can be a value of @ref DFSDM_Channel_SpiClock */
+}DFSDM_Channel_SerialInterfaceTypeDef;
+
+/**
+ * @brief DFSDM channel analog watchdog structure definition
+ */
+typedef struct
+{
+ uint32_t FilterOrder; /*!< Analog watchdog Sinc filter order.
+ This parameter can be a value of @ref DFSDM_Channel_AwdFilterOrder */
+ uint32_t Oversampling; /*!< Analog watchdog filter oversampling ratio.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32 */
+}DFSDM_Channel_AwdTypeDef;
+
+/**
+ * @brief DFSDM channel init structure definition
+ */
+typedef struct
+{
+ DFSDM_Channel_OutputClockTypeDef OutputClock; /*!< DFSDM channel output clock parameters */
+ DFSDM_Channel_InputTypeDef Input; /*!< DFSDM channel input parameters */
+ DFSDM_Channel_SerialInterfaceTypeDef SerialInterface; /*!< DFSDM channel serial interface parameters */
+ DFSDM_Channel_AwdTypeDef Awd; /*!< DFSDM channel analog watchdog parameters */
+ int32_t Offset; /*!< DFSDM channel offset.
+ This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */
+ uint32_t RightBitShift; /*!< DFSDM channel right bit shift.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+}DFSDM_Channel_InitTypeDef;
+
+/**
+ * @brief DFSDM channel handle structure definition
+ */
+typedef struct
+{
+ DFSDM_Channel_TypeDef *Instance; /*!< DFSDM channel instance */
+ DFSDM_Channel_InitTypeDef Init; /*!< DFSDM channel init parameters */
+ HAL_DFSDM_Channel_StateTypeDef State; /*!< DFSDM channel state */
+}DFSDM_Channel_HandleTypeDef;
+
+/**
+ * @brief HAL DFSDM Filter states definition
+ */
+typedef enum
+{
+ HAL_DFSDM_FILTER_STATE_RESET = 0x00U, /*!< DFSDM filter not initialized */
+ HAL_DFSDM_FILTER_STATE_READY = 0x01U, /*!< DFSDM filter initialized and ready for use */
+ HAL_DFSDM_FILTER_STATE_REG = 0x02U, /*!< DFSDM filter regular conversion in progress */
+ HAL_DFSDM_FILTER_STATE_INJ = 0x03U, /*!< DFSDM filter injected conversion in progress */
+ HAL_DFSDM_FILTER_STATE_REG_INJ = 0x04U, /*!< DFSDM filter regular and injected conversions in progress */
+ HAL_DFSDM_FILTER_STATE_ERROR = 0xFFU /*!< DFSDM filter state error */
+}HAL_DFSDM_Filter_StateTypeDef;
+
+/**
+ * @brief DFSDM filter regular conversion parameters structure definition
+ */
+typedef struct
+{
+ uint32_t Trigger; /*!< Trigger used to start regular conversion: software or synchronous.
+ This parameter can be a value of @ref DFSDM_Filter_Trigger */
+ FunctionalState FastMode; /*!< Enable/disable fast mode for regular conversion */
+ FunctionalState DmaMode; /*!< Enable/disable DMA for regular conversion */
+}DFSDM_Filter_RegularParamTypeDef;
+
+/**
+ * @brief DFSDM filter injected conversion parameters structure definition
+ */
+typedef struct
+{
+ uint32_t Trigger; /*!< Trigger used to start injected conversion: software, external or synchronous.
+ This parameter can be a value of @ref DFSDM_Filter_Trigger */
+ FunctionalState ScanMode; /*!< Enable/disable scanning mode for injected conversion */
+ FunctionalState DmaMode; /*!< Enable/disable DMA for injected conversion */
+ uint32_t ExtTrigger; /*!< External trigger.
+ This parameter can be a value of @ref DFSDM_Filter_ExtTrigger */
+ uint32_t ExtTriggerEdge; /*!< External trigger edge: rising, falling or both.
+ This parameter can be a value of @ref DFSDM_Filter_ExtTriggerEdge */
+}DFSDM_Filter_InjectedParamTypeDef;
+
+/**
+ * @brief DFSDM filter parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SincOrder; /*!< Sinc filter order.
+ This parameter can be a value of @ref DFSDM_Filter_SincOrder */
+ uint32_t Oversampling; /*!< Filter oversampling ratio.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
+ uint32_t IntOversampling; /*!< Integrator oversampling ratio.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 256 */
+}DFSDM_Filter_FilterParamTypeDef;
+
+/**
+ * @brief DFSDM filter init structure definition
+ */
+typedef struct
+{
+ DFSDM_Filter_RegularParamTypeDef RegularParam; /*!< DFSDM regular conversion parameters */
+ DFSDM_Filter_InjectedParamTypeDef InjectedParam; /*!< DFSDM injected conversion parameters */
+ DFSDM_Filter_FilterParamTypeDef FilterParam; /*!< DFSDM filter parameters */
+}DFSDM_Filter_InitTypeDef;
+
+/**
+ * @brief DFSDM filter handle structure definition
+ */
+typedef struct
+{
+ DFSDM_Filter_TypeDef *Instance; /*!< DFSDM filter instance */
+ DFSDM_Filter_InitTypeDef Init; /*!< DFSDM filter init parameters */
+ DMA_HandleTypeDef *hdmaReg; /*!< Pointer on DMA handler for regular conversions */
+ DMA_HandleTypeDef *hdmaInj; /*!< Pointer on DMA handler for injected conversions */
+ uint32_t RegularContMode; /*!< Regular conversion continuous mode */
+ uint32_t RegularTrigger; /*!< Trigger used for regular conversion */
+ uint32_t InjectedTrigger; /*!< Trigger used for injected conversion */
+ uint32_t ExtTriggerEdge; /*!< Rising, falling or both edges selected */
+ FunctionalState InjectedScanMode; /*!< Injected scanning mode */
+ uint32_t InjectedChannelsNbr; /*!< Number of channels in injected sequence */
+ uint32_t InjConvRemaining; /*!< Injected conversions remaining */
+ HAL_DFSDM_Filter_StateTypeDef State; /*!< DFSDM filter state */
+ uint32_t ErrorCode; /*!< DFSDM filter error code */
+}DFSDM_Filter_HandleTypeDef;
+
+/**
+ * @brief DFSDM filter analog watchdog parameters structure definition
+ */
+typedef struct
+{
+ uint32_t DataSource; /*!< Values from digital filter or from channel watchdog filter.
+ This parameter can be a value of @ref DFSDM_Filter_AwdDataSource */
+ uint32_t Channel; /*!< Analog watchdog channel selection.
+ This parameter can be a values combination of @ref DFSDM_Channel_Selection */
+ int32_t HighThreshold; /*!< High threshold for the analog watchdog.
+ This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */
+ int32_t LowThreshold; /*!< Low threshold for the analog watchdog.
+ This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */
+ uint32_t HighBreakSignal; /*!< Break signal assigned to analog watchdog high threshold event.
+ This parameter can be a values combination of @ref DFSDM_BreakSignals */
+ uint32_t LowBreakSignal; /*!< Break signal assigned to analog watchdog low threshold event.
+ This parameter can be a values combination of @ref DFSDM_BreakSignals */
+}DFSDM_Filter_AwdParamTypeDef;
+
+/**
+ * @}
+ */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DFSDM_Exported_Constants DFSDM Exported Constants
+ * @{
+ */
+
+/** @defgroup DFSDM_Channel_OuputClock DFSDM channel output clock selection
+ * @{
+ */
+#define DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM ((uint32_t)0x00000000U) /*!< Source for ouput clock is system clock */
+#define DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO DFSDM_CHCFGR1_CKOUTSRC /*!< Source for ouput clock is audio clock */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Channel_InputMultiplexer DFSDM channel input multiplexer
+ * @{
+ */
+#define DFSDM_CHANNEL_EXTERNAL_INPUTS ((uint32_t)0x00000000U) /*!< Data are taken from external inputs */
+#define DFSDM_CHANNEL_INTERNAL_REGISTER DFSDM_CHCFGR1_DATMPX_1 /*!< Data are taken from internal register */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Channel_DataPacking DFSDM channel input data packing
+ * @{
+ */
+#define DFSDM_CHANNEL_STANDARD_MODE ((uint32_t)0x00000000U) /*!< Standard data packing mode */
+#define DFSDM_CHANNEL_INTERLEAVED_MODE DFSDM_CHCFGR1_DATPACK_0 /*!< Interleaved data packing mode */
+#define DFSDM_CHANNEL_DUAL_MODE DFSDM_CHCFGR1_DATPACK_1 /*!< Dual data packing mode */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Channel_InputPins DFSDM channel input pins
+ * @{
+ */
+#define DFSDM_CHANNEL_SAME_CHANNEL_PINS ((uint32_t)0x00000000U) /*!< Input from pins on same channel */
+#define DFSDM_CHANNEL_FOLLOWING_CHANNEL_PINS DFSDM_CHCFGR1_CHINSEL /*!< Input from pins on following channel */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Channel_SerialInterfaceType DFSDM channel serial interface type
+ * @{
+ */
+#define DFSDM_CHANNEL_SPI_RISING ((uint32_t)0x00000000U) /*!< SPI with rising edge */
+#define DFSDM_CHANNEL_SPI_FALLING DFSDM_CHCFGR1_SITP_0 /*!< SPI with falling edge */
+#define DFSDM_CHANNEL_MANCHESTER_RISING DFSDM_CHCFGR1_SITP_1 /*!< Manchester with rising edge */
+#define DFSDM_CHANNEL_MANCHESTER_FALLING DFSDM_CHCFGR1_SITP /*!< Manchester with falling edge */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Channel_SpiClock DFSDM channel SPI clock selection
+ * @{
+ */
+#define DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL ((uint32_t)0x00000000U) /*!< External SPI clock */
+#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL DFSDM_CHCFGR1_SPICKSEL_0 /*!< Internal SPI clock */
+#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING DFSDM_CHCFGR1_SPICKSEL_1 /*!< Internal SPI clock divided by 2, falling edge */
+#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING DFSDM_CHCFGR1_SPICKSEL /*!< Internal SPI clock divided by 2, rising edge */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Channel_AwdFilterOrder DFSDM channel analog watchdog filter order
+ * @{
+ */
+#define DFSDM_CHANNEL_FASTSINC_ORDER ((uint32_t)0x00000000U) /*!< FastSinc filter type */
+#define DFSDM_CHANNEL_SINC1_ORDER DFSDM_CHAWSCDR_AWFORD_0 /*!< Sinc 1 filter type */
+#define DFSDM_CHANNEL_SINC2_ORDER DFSDM_CHAWSCDR_AWFORD_1 /*!< Sinc 2 filter type */
+#define DFSDM_CHANNEL_SINC3_ORDER DFSDM_CHAWSCDR_AWFORD /*!< Sinc 3 filter type */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Filter_Trigger DFSDM filter conversion trigger
+ * @{
+ */
+#define DFSDM_FILTER_SW_TRIGGER ((uint32_t)0x00000000U) /*!< Software trigger */
+#define DFSDM_FILTER_SYNC_TRIGGER ((uint32_t)0x00000001U) /*!< Synchronous with DFSDM_FLT0 */
+#define DFSDM_FILTER_EXT_TRIGGER ((uint32_t)0x00000002U) /*!< External trigger (only for injected conversion) */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Filter_ExtTrigger DFSDM filter external trigger
+ * @{
+ */
+#define DFSDM_FILTER_EXT_TRIG_TIM1_TRGO ((uint32_t)0x00000000U) /*!< For DFSDM filter 0 and 1*/
+#define DFSDM_FILTER_EXT_TRIG_TIM3_TRGO DFSDM_FLTCR1_JEXTSEL_0 /*!< For DFSDM filter 0 and 1*/
+#define DFSDM_FILTER_EXT_TRIG_TIM8_TRGO DFSDM_FLTCR1_JEXTSEL_1 /*!< For DFSDM filter 0 and 1*/
+#define DFSDM_FILTER_EXT_TRIG_TIM10_OC1 (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For DFSDM filter 0 and 1*/
+#define DFSDM_FILTER_EXT_TRIG_TIM4_TRGO DFSDM_FLTCR1_JEXTSEL_2 /*!< For DFSDM filter 0 and 1*/
+#define DFSDM_FILTER_EXT_TRIG_TIM6_TRGO (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For DFSDM filter 0 and 1*/
+#define DFSDM_FILTER_EXT_TRIG_EXTI11 (DFSDM_FLTCR1_JEXTSEL_1 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For DFSDM filter 0 and 1*/
+#define DFSDM_FILTER_EXT_TRIG_EXTI15 DFSDM_FLTCR1_JEXTSEL /*!< For DFSDM filter 0 and 1*/
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Filter_ExtTriggerEdge DFSDM filter external trigger edge
+ * @{
+ */
+#define DFSDM_FILTER_EXT_TRIG_RISING_EDGE DFSDM_FLTCR1_JEXTEN_0 /*!< External rising edge */
+#define DFSDM_FILTER_EXT_TRIG_FALLING_EDGE DFSDM_FLTCR1_JEXTEN_1 /*!< External falling edge */
+#define DFSDM_FILTER_EXT_TRIG_BOTH_EDGES DFSDM_FLTCR1_JEXTEN /*!< External rising and falling edges */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Filter_SincOrder DFSDM filter sinc order
+ * @{
+ */
+#define DFSDM_FILTER_FASTSINC_ORDER ((uint32_t)0x00000000U) /*!< FastSinc filter type */
+#define DFSDM_FILTER_SINC1_ORDER DFSDM_FLTFCR_FORD_0 /*!< Sinc 1 filter type */
+#define DFSDM_FILTER_SINC2_ORDER DFSDM_FLTFCR_FORD_1 /*!< Sinc 2 filter type */
+#define DFSDM_FILTER_SINC3_ORDER (DFSDM_FLTFCR_FORD_0 | DFSDM_FLTFCR_FORD_1) /*!< Sinc 3 filter type */
+#define DFSDM_FILTER_SINC4_ORDER DFSDM_FLTFCR_FORD_2 /*!< Sinc 4 filter type */
+#define DFSDM_FILTER_SINC5_ORDER (DFSDM_FLTFCR_FORD_0 | DFSDM_FLTFCR_FORD_2) /*!< Sinc 5 filter type */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Filter_AwdDataSource DFSDM filter analog watchdog data source
+ * @{
+ */
+#define DFSDM_FILTER_AWD_FILTER_DATA ((uint32_t)0x00000000U) /*!< From digital filter */
+#define DFSDM_FILTER_AWD_CHANNEL_DATA DFSDM_FLTCR1_AWFSEL /*!< From analog watchdog channel */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Filter_ErrorCode DFSDM filter error code
+ * @{
+ */
+#define DFSDM_FILTER_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define DFSDM_FILTER_ERROR_REGULAR_OVERRUN ((uint32_t)0x00000001U) /*!< Overrun occurs during regular conversion */
+#define DFSDM_FILTER_ERROR_INJECTED_OVERRUN ((uint32_t)0x00000002U) /*!< Overrun occurs during injected conversion */
+#define DFSDM_FILTER_ERROR_DMA ((uint32_t)0x00000003U) /*!< DMA error occurs */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_BreakSignals DFSDM break signals
+ * @{
+ */
+#define DFSDM_NO_BREAK_SIGNAL ((uint32_t)0x00000000U) /*!< No break signal */
+#define DFSDM_BREAK_SIGNAL_0 ((uint32_t)0x00000001U) /*!< Break signal 0 */
+#define DFSDM_BREAK_SIGNAL_1 ((uint32_t)0x00000002U) /*!< Break signal 1 */
+#define DFSDM_BREAK_SIGNAL_2 ((uint32_t)0x00000004U) /*!< Break signal 2 */
+#define DFSDM_BREAK_SIGNAL_3 ((uint32_t)0x00000008U) /*!< Break signal 3 */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Channel_Selection DFSDM Channel Selection
+ * @{
+ */
+/* DFSDM Channels ------------------------------------------------------------*/
+/* The DFSDM channels are defined as follows:
+ - in 16-bit LSB the channel mask is set
+ - in 16-bit MSB the channel number is set
+ e.g. for channel 3 definition:
+ - the channel mask is 0x00000008U (bit 3 is set)
+ - the channel number 3 is 0x00030000
+ --> Consequently, channel 3 definition is 0x00000008U | 0x00030000 = 0x00030008 */
+#define DFSDM_CHANNEL_0 ((uint32_t)0x00000001U)
+#define DFSDM_CHANNEL_1 ((uint32_t)0x00010002U)
+#define DFSDM_CHANNEL_2 ((uint32_t)0x00020004U)
+#define DFSDM_CHANNEL_3 ((uint32_t)0x00030008U)
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_ContinuousMode DFSDM Continuous Mode
+ * @{
+ */
+#define DFSDM_CONTINUOUS_CONV_OFF ((uint32_t)0x00000000U) /*!< Conversion are not continuous */
+#define DFSDM_CONTINUOUS_CONV_ON ((uint32_t)0x00000001U) /*!< Conversion are continuous */
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_AwdThreshold DFSDM analog watchdog threshold
+ * @{
+ */
+#define DFSDM_AWD_HIGH_THRESHOLD ((uint32_t)0x00000000U) /*!< Analog watchdog high threshold */
+#define DFSDM_AWD_LOW_THRESHOLD ((uint32_t)0x00000001U) /*!< Analog watchdog low threshold */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DFSDM_Exported_Macros DFSDM Exported Macros
+ * @{
+ */
+
+/** @brief Reset DFSDM channel handle state.
+ * @param __HANDLE__: DFSDM channel handle.
+ * @retval None
+ */
+#define __HAL_DFSDM_CHANNEL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DFSDM_CHANNEL_STATE_RESET)
+
+/** @brief Reset DFSDM filter handle state.
+ * @param __HANDLE__: DFSDM filter handle.
+ * @retval None
+ */
+#define __HAL_DFSDM_FILTER_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DFSDM_FILTER_STATE_RESET)
+
+/**
+ * @}
+ */
+/* End of exported macros ----------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DFSDM_Exported_Functions DFSDM Exported Functions
+ * @{
+ */
+
+/** @addtogroup DFSDM_Exported_Functions_Group1_Channel Channel initialization and de-initialization functions
+ * @{
+ */
+/* Channel initialization and de-initialization functions *********************/
+HAL_StatusTypeDef HAL_DFSDM_ChannelInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+/**
+ * @}
+ */
+
+/** @addtogroup DFSDM_Exported_Functions_Group2_Channel Channel operation functions
+ * @{
+ */
+/* Channel operation functions ************************************************/
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal);
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal);
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+
+int16_t HAL_DFSDM_ChannelGetAwdValue(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelModifyOffset(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, int32_t Offset);
+
+HAL_StatusTypeDef HAL_DFSDM_ChannelPollForCkab(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout);
+HAL_StatusTypeDef HAL_DFSDM_ChannelPollForScd(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout);
+
+void HAL_DFSDM_ChannelCkabCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+void HAL_DFSDM_ChannelScdCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Exported_Functions_Group3_Channel Channel state function
+ * @{
+ */
+/* Channel state function *****************************************************/
+HAL_DFSDM_Channel_StateTypeDef HAL_DFSDM_ChannelGetState(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+/**
+ * @}
+ */
+
+/** @addtogroup DFSDM_Exported_Functions_Group1_Filter Filter initialization and de-initialization functions
+ * @{
+ */
+/* Filter initialization and de-initialization functions *********************/
+HAL_StatusTypeDef HAL_DFSDM_FilterInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+/**
+ * @}
+ */
+
+/** @addtogroup DFSDM_Exported_Functions_Group2_Filter Filter control functions
+ * @{
+ */
+/* Filter control functions *********************/
+HAL_StatusTypeDef HAL_DFSDM_FilterConfigRegChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t Channel,
+ uint32_t ContinuousMode);
+HAL_StatusTypeDef HAL_DFSDM_FilterConfigInjChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup DFSDM_Exported_Functions_Group3_Filter Filter operation functions
+ * @{
+ */
+/* Filter operation functions *********************/
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterAwdStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+ DFSDM_Filter_AwdParamTypeDef* awdParam);
+HAL_StatusTypeDef HAL_DFSDM_FilterAwdStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterExdStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel);
+HAL_StatusTypeDef HAL_DFSDM_FilterExdStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+
+int32_t HAL_DFSDM_FilterGetRegularValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t* Channel);
+int32_t HAL_DFSDM_FilterGetInjectedValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t* Channel);
+int32_t HAL_DFSDM_FilterGetExdMaxValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t* Channel);
+int32_t HAL_DFSDM_FilterGetExdMinValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t* Channel);
+uint32_t HAL_DFSDM_FilterGetConvTimeValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+
+void HAL_DFSDM_IRQHandler(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+
+HAL_StatusTypeDef HAL_DFSDM_FilterPollForRegConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout);
+HAL_StatusTypeDef HAL_DFSDM_FilterPollForInjConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout);
+
+void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterInjConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterInjConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel, uint32_t Threshold);
+void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+/**
+ * @}
+ */
+
+/** @defgroup DFSDM_Exported_Functions_Group4_Filter Filter state functions
+ * @{
+ */
+/* Filter state functions *****************************************************/
+HAL_DFSDM_Filter_StateTypeDef HAL_DFSDM_FilterGetState(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+uint32_t HAL_DFSDM_FilterGetError(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DFSDM_Private_Macros DFSDM Private Macros
+* @{
+*/
+#define IS_DFSDM_CHANNEL_OUTPUT_CLOCK(CLOCK) (((CLOCK) == DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM) || \
+ ((CLOCK) == DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO))
+#define IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(DIVIDER) ((2U <= (DIVIDER)) && ((DIVIDER) <= 256U))
+#define IS_DFSDM_CHANNEL_INPUT(INPUT) (((INPUT) == DFSDM_CHANNEL_EXTERNAL_INPUTS) || \
+ ((INPUT) == DFSDM_CHANNEL_INTERNAL_REGISTER))
+#define IS_DFSDM_CHANNEL_DATA_PACKING(MODE) (((MODE) == DFSDM_CHANNEL_STANDARD_MODE) || \
+ ((MODE) == DFSDM_CHANNEL_INTERLEAVED_MODE) || \
+ ((MODE) == DFSDM_CHANNEL_DUAL_MODE))
+#define IS_DFSDM_CHANNEL_INPUT_PINS(PINS) (((PINS) == DFSDM_CHANNEL_SAME_CHANNEL_PINS) || \
+ ((PINS) == DFSDM_CHANNEL_FOLLOWING_CHANNEL_PINS))
+#define IS_DFSDM_CHANNEL_SERIAL_INTERFACE_TYPE(MODE) (((MODE) == DFSDM_CHANNEL_SPI_RISING) || \
+ ((MODE) == DFSDM_CHANNEL_SPI_FALLING) || \
+ ((MODE) == DFSDM_CHANNEL_MANCHESTER_RISING) || \
+ ((MODE) == DFSDM_CHANNEL_MANCHESTER_FALLING))
+#define IS_DFSDM_CHANNEL_SPI_CLOCK(TYPE) (((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL) || \
+ ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL) || \
+ ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING) || \
+ ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING))
+#define IS_DFSDM_CHANNEL_FILTER_ORDER(ORDER) (((ORDER) == DFSDM_CHANNEL_FASTSINC_ORDER) || \
+ ((ORDER) == DFSDM_CHANNEL_SINC1_ORDER) || \
+ ((ORDER) == DFSDM_CHANNEL_SINC2_ORDER) || \
+ ((ORDER) == DFSDM_CHANNEL_SINC3_ORDER))
+#define IS_DFSDM_CHANNEL_FILTER_OVS_RATIO(RATIO) ((1U <= (RATIO)) && ((RATIO) <= 32U))
+#define IS_DFSDM_CHANNEL_OFFSET(VALUE) ((-8388608 <= (VALUE)) && ((VALUE) <= 8388607))
+#define IS_DFSDM_CHANNEL_RIGHT_BIT_SHIFT(VALUE) ((VALUE) <= 0x1FU)
+#define IS_DFSDM_CHANNEL_SCD_THRESHOLD(VALUE) ((VALUE) <= 0xFFU)
+#define IS_DFSDM_FILTER_REG_TRIGGER(TRIG) (((TRIG) == DFSDM_FILTER_SW_TRIGGER) || \
+ ((TRIG) == DFSDM_FILTER_SYNC_TRIGGER))
+#define IS_DFSDM_FILTER_INJ_TRIGGER(TRIG) (((TRIG) == DFSDM_FILTER_SW_TRIGGER) || \
+ ((TRIG) == DFSDM_FILTER_SYNC_TRIGGER) || \
+ ((TRIG) == DFSDM_FILTER_EXT_TRIGGER))
+#define IS_DFSDM_FILTER_EXT_TRIG(TRIG) (((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO) || \
+ ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM3_TRGO) || \
+ ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO) || \
+ ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM10_OC1) || \
+ ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM4_TRGO) || \
+ ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM6_TRGO) || \
+ ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI11) || \
+ ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI15))
+#define IS_DFSDM_FILTER_EXT_TRIG_EDGE(EDGE) (((EDGE) == DFSDM_FILTER_EXT_TRIG_RISING_EDGE) || \
+ ((EDGE) == DFSDM_FILTER_EXT_TRIG_FALLING_EDGE) || \
+ ((EDGE) == DFSDM_FILTER_EXT_TRIG_BOTH_EDGES))
+#define IS_DFSDM_FILTER_SINC_ORDER(ORDER) (((ORDER) == DFSDM_FILTER_FASTSINC_ORDER) || \
+ ((ORDER) == DFSDM_FILTER_SINC1_ORDER) || \
+ ((ORDER) == DFSDM_FILTER_SINC2_ORDER) || \
+ ((ORDER) == DFSDM_FILTER_SINC3_ORDER) || \
+ ((ORDER) == DFSDM_FILTER_SINC4_ORDER) || \
+ ((ORDER) == DFSDM_FILTER_SINC5_ORDER))
+#define IS_DFSDM_FILTER_OVS_RATIO(RATIO) ((1U <= (RATIO)) && ((RATIO) <= 1024U))
+#define IS_DFSDM_FILTER_INTEGRATOR_OVS_RATIO(RATIO) ((1U <= (RATIO)) && ((RATIO) <= 256U))
+#define IS_DFSDM_FILTER_AWD_DATA_SOURCE(DATA) (((DATA) == DFSDM_FILTER_AWD_FILTER_DATA) || \
+ ((DATA) == DFSDM_FILTER_AWD_CHANNEL_DATA))
+#define IS_DFSDM_FILTER_AWD_THRESHOLD(VALUE) ((-8388608 <= (VALUE)) && ((VALUE) <= 8388607))
+#define IS_DFSDM_BREAK_SIGNALS(VALUE) ((VALUE) <= 0x0FU)
+#define IS_DFSDM_REGULAR_CHANNEL(CHANNEL) (((CHANNEL) == DFSDM_CHANNEL_0) || \
+ ((CHANNEL) == DFSDM_CHANNEL_1) || \
+ ((CHANNEL) == DFSDM_CHANNEL_2) || \
+ ((CHANNEL) == DFSDM_CHANNEL_3))
+#define IS_DFSDM_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) != 0U) && ((CHANNEL) <= 0x0003000FU))
+#define IS_DFSDM_CONTINUOUS_MODE(MODE) (((MODE) == DFSDM_CONTINUOUS_CONV_OFF) || \
+ ((MODE) == DFSDM_CONTINUOUS_CONV_ON))
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DFSDM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1305 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief DMA HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Direct Memory Access (DMA) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and errors functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable and configure the peripheral to be connected to the DMA Stream
+ (except for internal SRAM/FLASH memories: no initialization is
+ necessary) please refer to Reference manual for connection between peripherals
+ and DMA requests .
+
+ (#) For a given Stream, program the required configuration through the following parameters:
+ Transfer Direction, Source and Destination data formats,
+ Circular, Normal or peripheral flow control mode, Stream Priority level,
+ Source and Destination Increment mode, FIFO mode and its Threshold (if needed),
+ Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function.
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
+ address and destination address and the Length of data to be transferred
+ (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
+ case a fixed Timeout can be configured by User depending from his application.
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
+ (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
+ (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
+ Source address and destination address and the Length of data to be transferred. In this
+ case the DMA interrupt is configured
+ (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
+ (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
+ add his own function by customization of function pointer XferCpltCallback and
+ XferErrorCallback (i.e a member of DMA handle structure).
+ [..]
+ (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
+ detection.
+
+ (#) Use HAL_DMA_Abort() function to abort the current transfer
+
+ -@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
+
+ -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is
+ possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set
+ Half-Word data size for the peripheral to access its data register and set Word data size
+ for the Memory to gain in access time. Each two half words will be packed and written in
+ a single access to a Word in the Memory).
+
+ -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source
+ and Destination. In this case the Peripheral Data Size will be applied to both Source
+ and Destination.
+
+ *** DMA HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DMA HAL driver.
+
+ (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream.
+ (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream.
+ (+) __HAL_DMA_GET_FS: Return the current DMA Stream FIFO filled level.
+ (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Stream interrupts.
+ (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Stream interrupts.
+ (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not.
+
+ [..]
+ (@) You can refer to the DMA HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMA DMA
+ * @brief DMA HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register */
+ __IO uint32_t Reserved0;
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */
+} DMA_Base_Registers;
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Constants
+ * @{
+ */
+ #define HAL_TIMEOUT_DMA_ABORT ((uint32_t)5) /* 5 ms */
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Functions
+ * @{
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group1
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize the DMA Stream source
+ and destination addresses, incrementation and data sizes, transfer direction,
+ circular/normal mode selection, memory-to-memory mode selection and Stream priority value.
+ [..]
+ The HAL_DMA_Init() function follows the DMA configuration procedures as described in
+ reference manual.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the DMA according to the specified
+ * parameters in the DMA_InitTypeDef and create the associated handle.
+ * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmp = 0U;
+ uint32_t tickstart = HAL_GetTick();
+ DMA_Base_Registers *regs;
+
+ /* Check the DMA peripheral state */
+ if(hdma == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+ assert_param(IS_DMA_CHANNEL(hdma->Init.Channel));
+ assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
+ assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
+ assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
+ assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
+ assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
+ assert_param(IS_DMA_MODE(hdma->Init.Mode));
+ assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
+ assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode));
+ /* Check the memory burst, peripheral burst and FIFO threshold parameters only
+ when FIFO mode is enabled */
+ if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE)
+ {
+ assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold));
+ assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst));
+ assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
+ }
+
+ /* Allocate lock resource */
+ __HAL_UNLOCK(hdma);
+
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Check if the DMA Stream is effectively disabled */
+ while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get the CR register value */
+ tmp = hdma->Instance->CR;
+
+ /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */
+ tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \
+ DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \
+ DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \
+ DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM));
+
+ /* Prepare the DMA Stream configuration */
+ tmp |= hdma->Init.Channel | hdma->Init.Direction |
+ hdma->Init.PeriphInc | hdma->Init.MemInc |
+ hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
+ hdma->Init.Mode | hdma->Init.Priority;
+
+ /* the Memory burst and peripheral burst are not used when the FIFO is disabled */
+ if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+ {
+ /* Get memory burst and peripheral burst */
+ tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst;
+ }
+
+ /* Write to DMA Stream CR register */
+ hdma->Instance->CR = tmp;
+
+ /* Get the FCR register value */
+ tmp = hdma->Instance->FCR;
+
+ /* Clear Direct mode and FIFO threshold bits */
+ tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH);
+
+ /* Prepare the DMA Stream FIFO configuration */
+ tmp |= hdma->Init.FIFOMode;
+
+ /* the FIFO threshold is not used when the FIFO mode is disabled */
+ if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+ {
+ /* Get the FIFO threshold */
+ tmp |= hdma->Init.FIFOThreshold;
+
+ if(DMA_CheckFifoParam(hdma) != HAL_OK)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Write to DMA Stream FCR */
+ hdma->Instance->FCR = tmp;
+
+ /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate
+ DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */
+ regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clear all interrupt flags */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the DMA peripheral
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
+{
+ DMA_Base_Registers *regs;
+
+ /* Check the DMA peripheral state */
+ if(hdma == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the DMA peripheral state */
+ if(hdma->State == HAL_DMA_STATE_BUSY)
+ {
+ /* Return error status */
+ return HAL_BUSY;
+ }
+
+ /* Disable the selected DMA Streamx */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Reset DMA Streamx control register */
+ hdma->Instance->CR = 0U;
+
+ /* Reset DMA Streamx number of data to transfer register */
+ hdma->Instance->NDTR = 0U;
+
+ /* Reset DMA Streamx peripheral address register */
+ hdma->Instance->PAR = 0U;
+
+ /* Reset DMA Streamx memory 0 address register */
+ hdma->Instance->M0AR = 0U;
+
+ /* Reset DMA Streamx memory 1 address register */
+ hdma->Instance->M1AR = 0U;
+
+ /* Reset DMA Streamx FIFO control register */
+ hdma->Instance->FCR = (uint32_t)0x00000021U;
+
+ /* Get DMA steam Base Address */
+ regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state */
+ hdma->State = HAL_DMA_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the source, destination address and data length and Start DMA transfer
+ (+) Configure the source, destination address and data length and
+ Start DMA transfer with interrupt
+ (+) Abort DMA transfer
+ (+) Poll for transfer complete
+ (+) Handle DMA interrupt request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the DMA Transfer.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param DataLength: The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the Peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+ return status;
+}
+
+/**
+ * @brief Starts the DMA Transfer with interrupt enabled.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param DataLength: The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Enable Common interrupts*/
+ hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
+ hdma->Instance->FCR |= DMA_IT_FE;
+
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ hdma->Instance->CR |= DMA_IT_HT;
+ }
+
+ /* Enable the Peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Aborts the DMA Transfer.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ *
+ * @note After disabling a DMA Stream, a check for wait until the DMA Stream is
+ * effectively disabled is added. If a Stream is disabled
+ * while a data transfer is ongoing, the current data will be transferred
+ * and the Stream will be effectively disabled only after the transfer of
+ * this single data is finished.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
+{
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+
+ uint32_t tickstart = HAL_GetTick();
+
+ if(hdma->State != HAL_DMA_STATE_BUSY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Disable all the transfer interrupts */
+ hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
+ hdma->Instance->FCR &= ~(DMA_IT_FE);
+
+ if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+ {
+ hdma->Instance->CR &= ~(DMA_IT_HT);
+ }
+
+ /* Disable the stream */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Check if the DMA Stream is effectively disabled */
+ while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state*/
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Aborts the DMA Transfer in Interrupt mode.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
+{
+ if(hdma->State != HAL_DMA_STATE_BUSY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Set Abort State */
+ hdma->State = HAL_DMA_STATE_ABORT;
+
+ /* Disable the stream */
+ __HAL_DMA_DISABLE(hdma);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Polling for transfer complete.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CompleteLevel: Specifies the DMA level complete.
+ * @note The polling mode is kept in this version for legacy. it is recommanded to use the IT model instead.
+ * This model could be used for debug purpose.
+ * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode).
+ * @param Timeout: Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t temp;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t tmpisr;
+
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs;
+
+ /* Polling mode not supported in circular mode and double buffering mode */
+ if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ return HAL_ERROR;
+ }
+
+ /* Get the level transfer complete flag */
+ if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+ {
+ /* Transfer Complete flag */
+ temp = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
+ }
+ else
+ {
+ /* Half Transfer Complete flag */
+ temp = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+ }
+
+ regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+ tmpisr = regs->ISR;
+
+ while((tmpisr & temp) == RESET )
+ {
+ /* Check for the Timeout (Not applicable in circular mode)*/
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+
+ /* Clear the transfer error flag */
+ regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
+ }
+
+ if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+
+ /* Clear the FIFO error flag */
+ regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
+ }
+
+ if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+
+ /* Clear the Direct Mode error flag */
+ regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
+ }
+ }
+
+ if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
+ {
+ if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
+ {
+ HAL_DMA_Abort(hdma);
+
+ /* Clear the half transfer and transfer complete flags */
+ regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State= HAL_DMA_STATE_READY;
+
+ return HAL_ERROR;
+ }
+
+ status = HAL_ERROR;
+ }
+
+ /* Get the level transfer complete flag */
+ if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+ {
+ /* Clear the half transfer and transfer complete flags */
+ regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+ else
+ {
+ /* Clear the half transfer and transfer complete flags */
+ regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Handles DMA interrupt request.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval None
+ */
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmpisr;
+ __IO uint32_t count = 0;
+ uint32_t timeout = SystemCoreClock / 9600;
+
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+
+ tmpisr = regs->ISR;
+
+ /* Transfer Error Interrupt management ***************************************/
+ if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
+ {
+ /* Disable the transfer error interrupt */
+ hdma->Instance->CR &= ~(DMA_IT_TE);
+
+ /* Clear the transfer error flag */
+ regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
+
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+ }
+ }
+ /* FIFO Error Interrupt management ******************************************/
+ if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET)
+ {
+ /* Clear the FIFO error flag */
+ regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
+
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+ }
+ }
+ /* Direct Mode Error Interrupt management ***********************************/
+ if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET)
+ {
+ /* Clear the direct mode error flag */
+ regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
+
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+ }
+ }
+ /* Half Transfer Complete Interrupt management ******************************/
+ if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
+ {
+ /* Clear the half transfer complete flag */
+ regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+
+ /* Multi_Buffering mode enabled */
+ if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
+ {
+ /* Current memory buffer used is Memory 0 */
+ if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
+ {
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferHalfCpltCallback(hdma);
+ }
+ }
+ /* Current memory buffer used is Memory 1 */
+ else
+ {
+ if(hdma->XferM1HalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferM1HalfCpltCallback(hdma);
+ }
+ }
+ }
+ else
+ {
+ /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
+ {
+ /* Disable the half transfer interrupt */
+ hdma->Instance->CR &= ~(DMA_IT_HT);
+ }
+
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferHalfCpltCallback(hdma);
+ }
+ }
+ }
+ }
+ /* Transfer Complete Interrupt management ***********************************/
+ if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
+ {
+ /* Clear the transfer complete flag */
+ regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
+
+ if(HAL_DMA_STATE_ABORT == hdma->State)
+ {
+ /* Disable all the transfer interrupts */
+ hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
+ hdma->Instance->FCR &= ~(DMA_IT_FE);
+
+ if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+ {
+ hdma->Instance->CR &= ~(DMA_IT_HT);
+ }
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ if(hdma->XferAbortCallback != NULL)
+ {
+ hdma->XferAbortCallback(hdma);
+ }
+ return;
+ }
+
+ if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
+ {
+ /* Current memory buffer used is Memory 0 */
+ if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
+ {
+ if(hdma->XferM1CpltCallback != NULL)
+ {
+ /* Transfer complete Callback for memory1 */
+ hdma->XferM1CpltCallback(hdma);
+ }
+ }
+ /* Current memory buffer used is Memory 1 */
+ else
+ {
+ if(hdma->XferCpltCallback != NULL)
+ {
+ /* Transfer complete Callback for memory0 */
+ hdma->XferCpltCallback(hdma);
+ }
+ }
+ }
+ /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */
+ else
+ {
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
+ {
+ /* Disable the transfer complete interrupt */
+ hdma->Instance->CR &= ~(DMA_IT_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+
+ if(hdma->XferCpltCallback != NULL)
+ {
+ /* Transfer complete callback */
+ hdma->XferCpltCallback(hdma);
+ }
+ }
+ }
+ }
+
+ /* manage error case */
+ if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
+ {
+ if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
+ {
+ hdma->State = HAL_DMA_STATE_ABORT;
+
+ /* Disable the stream */
+ __HAL_DMA_DISABLE(hdma);
+
+ do
+ {
+ if (++count > timeout)
+ {
+ break;
+ }
+ }
+ while((hdma->Instance->CR & DMA_SxCR_EN) != RESET);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+
+ if(hdma->XferErrorCallback != NULL)
+ {
+ /* Transfer error callback */
+ hdma->XferErrorCallback(hdma);
+ }
+ }
+}
+
+/**
+ * @brief Register callbacks
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID: User Callback identifer
+ * a DMA_HandleTypeDef structure as parameter.
+ * @param pCallback: pointer to private callbacsk function which has pointer to
+ * a DMA_HandleTypeDef structure as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma))
+{
+
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_M1CPLT_CB_ID:
+ hdma->XferM1CpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
+ hdma->XferM1HalfCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = pCallback;
+ break;
+
+ default:
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @brief UnRegister callbacks
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID: User Callback identifer
+ * a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_M1CPLT_CB_ID:
+ hdma->XferM1CpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
+ hdma->XferM1HalfCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ALL_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ hdma->XferHalfCpltCallback = NULL;
+ hdma->XferM1CpltCallback = NULL;
+ hdma->XferM1HalfCpltCallback = NULL;
+ hdma->XferErrorCallback = NULL;
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group3
+ *
+@verbatim
+ ===============================================================================
+ ##### State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DMA state
+ (+) Get error code
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the DMA state.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL state
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
+{
+ return hdma->State;
+}
+
+/**
+ * @brief Return the DMA error code
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval DMA Error Code
+ */
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
+{
+ return hdma->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Sets the DMA Transfer parameter.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param DataLength: The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Clear DBM bit */
+ hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM);
+
+ /* Configure DMA Stream data length */
+ hdma->Instance->NDTR = DataLength;
+
+ /* Peripheral to Memory */
+ if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+ {
+ /* Configure DMA Stream destination address */
+ hdma->Instance->PAR = DstAddress;
+
+ /* Configure DMA Stream source address */
+ hdma->Instance->M0AR = SrcAddress;
+ }
+ /* Memory to Peripheral */
+ else
+ {
+ /* Configure DMA Stream source address */
+ hdma->Instance->PAR = SrcAddress;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M0AR = DstAddress;
+ }
+}
+
+/**
+ * @brief Returns the DMA Stream base address depending on stream number
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval Stream base address
+ */
+static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma)
+{
+ uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U;
+
+ /* lookup table for necessary bitshift of flags within status registers */
+ static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U};
+ hdma->StreamIndex = flagBitshiftOffset[stream_number];
+
+ if (stream_number > 3U)
+ {
+ /* return pointer to HISR and HIFCR */
+ hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U);
+ }
+ else
+ {
+ /* return pointer to LISR and LIFCR */
+ hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU));
+ }
+
+ return hdma->StreamBaseAddress;
+}
+
+/**
+ * @brief Checks compatibility between FIFO threshold level and size of the memory burst
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmp = hdma->Init.FIFOThreshold;
+
+ /* Memory Data size equal to Byte */
+ if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE)
+ {
+ switch (tmp)
+ {
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ if((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ if(hdma->Init.MemBurst == DMA_MBURST_INC16)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ if((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Memory Data size equal to Half-Word */
+ else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+ {
+ switch (tmp)
+ {
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ status = HAL_ERROR;
+ break;
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ status = HAL_ERROR;
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ if (hdma->Init.MemBurst == DMA_MBURST_INC16)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Memory Data size equal to Word */
+ else
+ {
+ switch (tmp)
+ {
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ status = HAL_ERROR;
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,793 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_H
+#define __STM32F4xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @brief DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel used for the specified stream.
+ This parameter can be a value of @ref DMA_Channel_selection */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Stream */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+ uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+ This parameter can be a value of @ref DMA_FIFO_direct_mode
+ @note The Direct mode (FIFO mode disabled) cannot be used if the
+ memory-to-memory data transfer is configured on the selected stream */
+
+ uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
+ This parameter can be a value of @ref DMA_FIFO_threshold_level */
+
+ uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
+ It specifies the amount of data to be transferred in a single non interruptible
+ transaction.
+ This parameter can be a value of @ref DMA_Memory_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+
+ uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
+ It specifies the amount of data to be transferred in a single non interruptible
+ transaction.
+ This parameter can be a value of @ref DMA_Peripheral_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+}DMA_InitTypeDef;
+
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
+ HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */
+ HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
+ HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */
+ HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */
+ HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */
+ HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */
+ HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */
+ HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */
+}HAL_DMA_CallbackIDTypeDef;
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Stream_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
+
+ void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+ uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */
+
+ uint32_t StreamIndex; /*!< DMA Stream Index */
+
+}DMA_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @brief DMA Exported constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @brief DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001U) /*!< Transfer error */
+#define HAL_DMA_ERROR_FE ((uint32_t)0x00000002U) /*!< FIFO error */
+#define HAL_DMA_ERROR_DME ((uint32_t)0x00000004U) /*!< Direct Mode error */
+#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout error */
+#define HAL_DMA_ERROR_PARAM ((uint32_t)0x00000040U) /*!< Parameter error */
+#define HAL_DMA_ERROR_NO_XFER ((uint32_t)0x00000080U) /*!< Abort requested with no Xfer ongoing */
+#define HAL_DMA_ERROR_NOT_SUPPORTED ((uint32_t)0x00000100U) /*!< Not supported mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Channel_selection DMA Channel selection
+ * @brief DMA channel selection
+ * @{
+ */
+#define DMA_CHANNEL_0 ((uint32_t)0x00000000U) /*!< DMA Channel 0 */
+#define DMA_CHANNEL_1 ((uint32_t)0x02000000U) /*!< DMA Channel 1 */
+#define DMA_CHANNEL_2 ((uint32_t)0x04000000U) /*!< DMA Channel 2 */
+#define DMA_CHANNEL_3 ((uint32_t)0x06000000U) /*!< DMA Channel 3 */
+#define DMA_CHANNEL_4 ((uint32_t)0x08000000U) /*!< DMA Channel 4 */
+#define DMA_CHANNEL_5 ((uint32_t)0x0A000000U) /*!< DMA Channel 5 */
+#define DMA_CHANNEL_6 ((uint32_t)0x0C000000U) /*!< DMA Channel 6 */
+#define DMA_CHANNEL_7 ((uint32_t)0x0E000000U) /*!< DMA Channel 7 */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @brief DMA data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000U) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @brief DMA peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */
+#define DMA_PINC_DISABLE ((uint32_t)0x00000000U) /*!< Peripheral increment mode disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @brief DMA memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */
+#define DMA_MINC_DISABLE ((uint32_t)0x00000000U) /*!< Memory increment mode disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @brief DMA peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000U) /*!< Peripheral data alignment: Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @brief DMA memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000U) /*!< Memory data alignment: Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @brief DMA mode
+ * @{
+ */
+#define DMA_NORMAL ((uint32_t)0x00000000U) /*!< Normal mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */
+#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @brief DMA priority levels
+ * @{
+ */
+#define DMA_PRIORITY_LOW ((uint32_t)0x00000000U) /*!< Priority level: Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
+ * @brief DMA FIFO direct mode
+ * @{
+ */
+#define DMA_FIFOMODE_DISABLE ((uint32_t)0x00000000U) /*!< FIFO mode disable */
+#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
+ * @brief DMA FIFO level
+ * @{
+ */
+#define DMA_FIFO_THRESHOLD_1QUARTERFULL ((uint32_t)0x00000000U) /*!< FIFO threshold 1 quart full configuration */
+#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */
+#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */
+#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_burst DMA Memory burst
+ * @brief DMA memory burst
+ * @{
+ */
+#define DMA_MBURST_SINGLE ((uint32_t)0x00000000U)
+#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0)
+#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1)
+#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
+ * @brief DMA peripheral burst
+ * @{
+ */
+#define DMA_PBURST_SINGLE ((uint32_t)0x00000000U)
+#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0)
+#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1)
+#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @brief DMA interrupts definition
+ * @{
+ */
+#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE)
+#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE)
+#define DMA_IT_FE ((uint32_t)0x00000080U)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @brief DMA flag definitions
+ * @{
+ */
+#define DMA_FLAG_FEIF0_4 ((uint32_t)0x00800001U)
+#define DMA_FLAG_DMEIF0_4 ((uint32_t)0x00800004U)
+#define DMA_FLAG_TEIF0_4 ((uint32_t)0x00000008U)
+#define DMA_FLAG_HTIF0_4 ((uint32_t)0x00000010U)
+#define DMA_FLAG_TCIF0_4 ((uint32_t)0x00000020U)
+#define DMA_FLAG_FEIF1_5 ((uint32_t)0x00000040U)
+#define DMA_FLAG_DMEIF1_5 ((uint32_t)0x00000100U)
+#define DMA_FLAG_TEIF1_5 ((uint32_t)0x00000200U)
+#define DMA_FLAG_HTIF1_5 ((uint32_t)0x00000400U)
+#define DMA_FLAG_TCIF1_5 ((uint32_t)0x00000800U)
+#define DMA_FLAG_FEIF2_6 ((uint32_t)0x00010000U)
+#define DMA_FLAG_DMEIF2_6 ((uint32_t)0x00040000U)
+#define DMA_FLAG_TEIF2_6 ((uint32_t)0x00080000U)
+#define DMA_FLAG_HTIF2_6 ((uint32_t)0x00100000U)
+#define DMA_FLAG_TCIF2_6 ((uint32_t)0x00200000U)
+#define DMA_FLAG_FEIF3_7 ((uint32_t)0x00400000U)
+#define DMA_FLAG_DMEIF3_7 ((uint32_t)0x01000000U)
+#define DMA_FLAG_TEIF3_7 ((uint32_t)0x02000000U)
+#define DMA_FLAG_HTIF3_7 ((uint32_t)0x04000000U)
+#define DMA_FLAG_TCIF3_7 ((uint32_t)0x08000000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__: specifies the DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Return the current DMA Stream FIFO filled level.
+ * @param __HANDLE__: DMA handle
+ * @retval The FIFO filling state.
+ * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
+ * and not empty.
+ * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
+ * - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
+ * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
+ * - DMA_FIFOStatus_Empty: when FIFO is empty
+ * - DMA_FIFOStatus_Full: when FIFO is full
+ */
+#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
+
+/**
+ * @brief Enable the specified DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
+
+/**
+ * @brief Disable the specified DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Return the current DMA Stream transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
+ DMA_FLAG_TCIF3_7)
+
+/**
+ * @brief Return the current DMA Stream half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
+ DMA_FLAG_HTIF3_7)
+
+/**
+ * @brief Return the current DMA Stream transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
+ DMA_FLAG_TEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream FIFO error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified FIFO error flag index.
+ */
+#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
+ DMA_FLAG_FEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream direct mode error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified direct mode error flag index.
+ */
+#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ DMA_FLAG_DMEIF3_7)
+
+/**
+ * @brief Get the DMA Stream pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
+
+/**
+ * @brief Clear the DMA Stream pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
+
+/**
+ * @brief Enable the specified DMA Stream interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the specified DMA Stream interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Check whether the specified DMA Stream interrupt is enabled or disabled.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval The state of DMA_IT.
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+ ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
+ ((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
+
+/**
+ * @brief Writes the number of data units to be transferred on the DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @param __COUNTER__: Number of data units to be transferred (from 0 to 65535)
+ * Number of data items depends only on the Peripheral data format.
+ *
+ * @note If Peripheral data format is Bytes: number of data units is equal
+ * to total number of bytes to be transferred.
+ *
+ * @note If Peripheral data format is Half-Word: number of data units is
+ * equal to total number of bytes to be transferred / 2.
+ *
+ * @note If Peripheral data format is Word: number of data units is equal
+ * to total number of bytes to be transferred / 4.
+ *
+ * @retval The number of remaining data units in the current DMAy Streamx transfer.
+ */
+#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
+
+/**
+ * @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
+ * @param __HANDLE__: DMA handle
+ *
+ * @retval The number of remaining data units in the current DMA Stream transfer.
+ */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
+
+
+/* Include DMA HAL Extension module */
+#include "stm32f4xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+ * @brief DMA Exported functions
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
+ * @brief I/O operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_CleanCallbacks(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+/* Private Constants -------------------------------------------------------------*/
+/** @defgroup DMA_Private_Constants DMA Private Constants
+ * @brief DMA private defines and constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+ * @brief DMA private macros
+ * @{
+ */
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+ ((CHANNEL) == DMA_CHANNEL_1) || \
+ ((CHANNEL) == DMA_CHANNEL_2) || \
+ ((CHANNEL) == DMA_CHANNEL_3) || \
+ ((CHANNEL) == DMA_CHANNEL_4) || \
+ ((CHANNEL) == DMA_CHANNEL_5) || \
+ ((CHANNEL) == DMA_CHANNEL_6) || \
+ ((CHANNEL) == DMA_CHANNEL_7))
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR) || \
+ ((MODE) == DMA_PFCTRL))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
+ ((STATE) == DMA_FIFOMODE_ENABLE))
+
+#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
+
+#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
+ ((BURST) == DMA_MBURST_INC4) || \
+ ((BURST) == DMA_MBURST_INC8) || \
+ ((BURST) == DMA_MBURST_INC16))
+
+#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
+ ((BURST) == DMA_PBURST_INC4) || \
+ ((BURST) == DMA_PBURST_INC8) || \
+ ((BURST) == DMA_PBURST_INC16))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+ * @brief DMA private functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1719 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma2d.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief DMA2D HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the DMA2D peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Program the required configuration through the following parameters:
+ the transfer mode, the output color mode and the output offset using
+ HAL_DMA2D_Init() function.
+
+ (#) Program the required configuration through the following parameters:
+ the input color mode, the input color, the input alpha value, the alpha mode,
+ and the input offset using HAL_DMA2D_ConfigLayer() function for foreground
+ or/and background layer.
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (#) Configure pdata parameter (explained hereafter), destination and data length
+ and enable the transfer using HAL_DMA2D_Start().
+ (#) Wait for end of transfer using HAL_DMA2D_PollForTransfer(), at this stage
+ user can specify the value of timeout according to his end application.
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (#) Configure pdata parameter, destination and data length and enable
+ the transfer using HAL_DMA2D_Start_IT().
+ (#) Use HAL_DMA2D_IRQHandler() called under DMA2D_IRQHandler() interrupt subroutine
+ (#) At the end of data transfer HAL_DMA2D_IRQHandler() function is executed and user can
+ add his own function by customization of function pointer XferCpltCallback (member
+ of DMA2D handle structure).
+ (#) In case of error, the HAL_DMA2D_IRQHandler() function will call the callback
+ XferErrorCallback.
+
+ -@- In Register-to-Memory transfer mode, pdata parameter is the register
+ color, in Memory-to-memory or Memory-to-Memory with pixel format
+ conversion pdata is the source address.
+
+ -@- Configure the foreground source address, the background source address,
+ the destination and data length then Enable the transfer using
+ HAL_DMA2D_BlendingStart() in polling mode and HAL_DMA2D_BlendingStart_IT()
+ in interrupt mode
+
+ -@- HAL_DMA2D_BlendingStart() and HAL_DMA2D_BlendingStart_IT() functions
+ are used if the memory to memory with blending transfer mode is selected.
+
+ (#) Optionally, configure and enable the CLUT using HAL_DMA2D_CLUTLoad() in polling
+ mode or HAL_DMA2D_CLUTLoad_IT() in interrupt mode.
+
+ (#) Optionally, configure the line watermark in using the API HAL_DMA2D_ProgramLineEvent()
+
+ (#) Optionally, configure the dead time value in the AHB clock cycle inserted between two
+ consecutive accesses on the AHB master port in using the API HAL_DMA2D_ConfigDeadTime()
+ and enable/disable the functionality with the APIs HAL_DMA2D_EnableDeadTime() or
+ HAL_DMA2D_DisableDeadTime().
+
+ (#) The transfer can be suspended, resumed and aborted using the following
+ functions: HAL_DMA2D_Suspend(), HAL_DMA2D_Resume(), HAL_DMA2D_Abort().
+
+ (#) The CLUT loading can be suspended, resumed and aborted using the following
+ functions: HAL_DMA2D_CLUTLoading_Suspend(), HAL_DMA2D_CLUTLoading_Resume(),
+ HAL_DMA2D_CLUTLoading_Abort().
+
+ (#) To control the DMA2D state, use the following function: HAL_DMA2D_GetState().
+
+ (#) To read the DMA2D error code, use the following function: HAL_DMA2D_GetError().
+
+ *** DMA2D HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DMA2D HAL driver :
+
+ (+) __HAL_DMA2D_ENABLE: Enable the DMA2D peripheral.
+ (+) __HAL_DMA2D_GET_FLAG: Get the DMA2D pending flags.
+ (+) __HAL_DMA2D_CLEAR_FLAG: Clear the DMA2D pending flags.
+ (+) __HAL_DMA2D_ENABLE_IT: Enable the specified DMA2D interrupts.
+ (+) __HAL_DMA2D_DISABLE_IT: Disable the specified DMA2D interrupts.
+ (+) __HAL_DMA2D_GET_IT_SOURCE: Check whether the specified DMA2D interrupt is enabled or not
+
+ [..]
+ (@) You can refer to the DMA2D HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMA2D DMA2D
+ * @brief DMA2D HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private types -------------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Constants DMA2D Private Constants
+ * @{
+ */
+
+/** @defgroup DMA2D_TimeOut DMA2D Time Out
+ * @{
+ */
+#define DMA2D_TIMEOUT_ABORT ((uint32_t)1000U) /*!< 1s */
+#define DMA2D_TIMEOUT_SUSPEND ((uint32_t)1000U) /*!< 1s */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Shifts DMA2D Shifts
+ * @{
+ */
+#define DMA2D_POSITION_FGPFCCR_CS (uint32_t)POSITION_VAL(DMA2D_FGPFCCR_CS) /*!< Required left shift to set foreground CLUT size */
+#define DMA2D_POSITION_BGPFCCR_CS (uint32_t)POSITION_VAL(DMA2D_BGPFCCR_CS) /*!< Required left shift to set background CLUT size */
+
+#define DMA2D_POSITION_FGPFCCR_CCM (uint32_t)POSITION_VAL(DMA2D_FGPFCCR_CCM) /*!< Required left shift to set foreground CLUT color mode */
+#define DMA2D_POSITION_BGPFCCR_CCM (uint32_t)POSITION_VAL(DMA2D_BGPFCCR_CCM) /*!< Required left shift to set background CLUT color mode */
+
+#define DMA2D_POSITION_AMTCR_DT (uint32_t)POSITION_VAL(DMA2D_AMTCR_DT) /*!< Required left shift to set deadtime value */
+
+#define DMA2D_POSITION_FGPFCCR_AM (uint32_t)POSITION_VAL(DMA2D_FGPFCCR_AM) /*!< Required left shift to set foreground alpha mode */
+#define DMA2D_POSITION_BGPFCCR_AM (uint32_t)POSITION_VAL(DMA2D_BGPFCCR_AM) /*!< Required left shift to set background alpha mode */
+
+#define DMA2D_POSITION_FGPFCCR_ALPHA (uint32_t)POSITION_VAL(DMA2D_FGPFCCR_ALPHA) /*!< Required left shift to set foreground alpha value */
+#define DMA2D_POSITION_BGPFCCR_ALPHA (uint32_t)POSITION_VAL(DMA2D_BGPFCCR_ALPHA) /*!< Required left shift to set background alpha value */
+
+#define DMA2D_POSITION_NLR_PL (uint32_t)POSITION_VAL(DMA2D_NLR_PL) /*!< Required left shift to set pixels per lines value */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup DMA2D_Private_Functions_Prototypes
+ * @{
+ */
+static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Functions DMA2D Exported Functions
+ * @{
+ */
+
+/** @defgroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the DMA2D
+ (+) De-initialize the DMA2D
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the DMA2D according to the specified
+ * parameters in the DMA2D_InitTypeDef and create the associated handle.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d)
+{
+ /* Check the DMA2D peripheral state */
+ if(hdma2d == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA2D_ALL_INSTANCE(hdma2d->Instance));
+ assert_param(IS_DMA2D_MODE(hdma2d->Init.Mode));
+ assert_param(IS_DMA2D_CMODE(hdma2d->Init.ColorMode));
+ assert_param(IS_DMA2D_OFFSET(hdma2d->Init.OutputOffset));
+
+ if(hdma2d->State == HAL_DMA2D_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hdma2d->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_DMA2D_MspInit(hdma2d);
+ }
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* DMA2D CR register configuration -------------------------------------------*/
+ MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_MODE, hdma2d->Init.Mode);
+
+ /* DMA2D OPFCCR register configuration ---------------------------------------*/
+ MODIFY_REG(hdma2d->Instance->OPFCCR, DMA2D_OPFCCR_CM, hdma2d->Init.ColorMode);
+
+ /* DMA2D OOR register configuration ------------------------------------------*/
+ MODIFY_REG(hdma2d->Instance->OOR, DMA2D_OOR_LO, hdma2d->Init.OutputOffset);
+
+ /* Update error code */
+ hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
+
+ /* Initialize the DMA2D state*/
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the DMA2D peripheral registers to their default reset
+ * values.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval None
+ */
+
+HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d)
+{
+ /* Check the DMA2D peripheral state */
+ if(hdma2d == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Before aborting any DMA2D transfer or CLUT loading, check
+ first whether or not DMA2D clock is enabled */
+ if (__HAL_RCC_DMA2D_IS_CLK_ENABLED())
+ {
+ /* Abort DMA2D transfer if any */
+ if ((hdma2d->Instance->CR & DMA2D_CR_START) == DMA2D_CR_START)
+ {
+ if (HAL_DMA2D_Abort(hdma2d) != HAL_OK)
+ {
+ /* Issue when aborting DMA2D transfer */
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Abort background CLUT loading if any */
+ if ((hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START) == DMA2D_BGPFCCR_START)
+ {
+ if (HAL_DMA2D_CLUTLoading_Abort(hdma2d, 0U) != HAL_OK)
+ {
+ /* Issue when aborting background CLUT loading */
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Abort foreground CLUT loading if any */
+ if ((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) == DMA2D_FGPFCCR_START)
+ {
+ if (HAL_DMA2D_CLUTLoading_Abort(hdma2d, 1U) != HAL_OK)
+ {
+ /* Issue when aborting foreground CLUT loading */
+ return HAL_ERROR;
+ }
+ }
+ }
+ }
+ }
+
+ /* Carry on with de-initialization of low level hardware */
+ HAL_DMA2D_MspDeInit(hdma2d);
+
+ /* Reset DMA2D control registers*/
+ hdma2d->Instance->CR = 0U;
+ hdma2d->Instance->FGOR = 0U;
+ hdma2d->Instance->BGOR = 0U;
+ hdma2d->Instance->FGPFCCR = 0U;
+ hdma2d->Instance->BGPFCCR = 0U;
+ hdma2d->Instance->OPFCCR = 0U;
+
+ /* Update error code */
+ hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
+
+ /* Initialize the DMA2D state*/
+ hdma2d->State = HAL_DMA2D_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DMA2D MSP.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval None
+ */
+__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma2d);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_DMA2D_MspInit can be implemented in the user file.
+ */
+}
+
+/**
+ * @brief DeInitializes the DMA2D MSP.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval None
+ */
+__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma2d);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_DMA2D_MspDeInit can be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the pdata, destination address and data size then
+ start the DMA2D transfer.
+ (+) Configure the source for foreground and background, destination address
+ and data size then start a MultiBuffer DMA2D transfer.
+ (+) Configure the pdata, destination address and data size then
+ start the DMA2D transfer with interrupt.
+ (+) Configure the source for foreground and background, destination address
+ and data size then start a MultiBuffer DMA2D transfer with interrupt.
+ (+) Abort DMA2D transfer.
+ (+) Suspend DMA2D transfer.
+ (+) Resume DMA2D transfer.
+ (+) Enable CLUT transfer.
+ (+) Configure CLUT loading then start transfer in polling mode.
+ (+) Configure CLUT loading then start transfer in interrupt mode.
+ (+) Abort DMA2D CLUT loading.
+ (+) Suspend DMA2D CLUT loading.
+ (+) Resume DMA2D CLUT loading.
+ (+) Poll for transfer complete.
+ (+) handle DMA2D interrupt request.
+ (+) Transfer watermark callback.
+ (+) CLUT Transfer Complete callback.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start the DMA2D Transfer.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param pdata: Configure the source memory Buffer address if
+ * Memory-to-Memory or Memory-to-Memory with pixel format
+ * conversion mode is selected, or configure
+ * the color value if Register-to-Memory mode is selected.
+ * @param DstAddress: The destination memory Buffer address.
+ * @param Width: The width of data to be transferred from source to destination (expressed in number of pixels per line).
+ * @param Height: The height of data to be transferred from source to destination (expressed in number of lines).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LINE(Height));
+ assert_param(IS_DMA2D_PIXEL(Width));
+
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Configure the source, destination address and the data size */
+ DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
+
+ /* Enable the Peripheral */
+ __HAL_DMA2D_ENABLE(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start the DMA2D Transfer with interrupt enabled.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param pdata: Configure the source memory Buffer address if
+ * the Memory-to-Memory or Memory-to-Memory with pixel format
+ * conversion mode is selected, or configure
+ * the color value if Register-to-Memory mode is selected.
+ * @param DstAddress: The destination memory Buffer address.
+ * @param Width: The width of data to be transferred from source to destination (expressed in number of pixels per line).
+ * @param Height: The height of data to be transferred from source to destination (expressed in number of lines).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LINE(Height));
+ assert_param(IS_DMA2D_PIXEL(Width));
+
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Configure the source, destination address and the data size */
+ DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
+
+ /* Enable the transfer complete, transfer error and configuration error interrupts */
+ __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC|DMA2D_IT_TE|DMA2D_IT_CE);
+
+ /* Enable the Peripheral */
+ __HAL_DMA2D_ENABLE(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start the multi-source DMA2D Transfer.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param SrcAddress1: The source memory Buffer address for the foreground layer.
+ * @param SrcAddress2: The source memory Buffer address for the background layer.
+ * @param DstAddress: The destination memory Buffer address.
+ * @param Width: The width of data to be transferred from source to destination (expressed in number of pixels per line).
+ * @param Height: The height of data to be transferred from source to destination (expressed in number of lines).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LINE(Height));
+ assert_param(IS_DMA2D_PIXEL(Width));
+
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Configure DMA2D Stream source2 address */
+ WRITE_REG(hdma2d->Instance->BGMAR, SrcAddress2);
+
+ /* Configure the source, destination address and the data size */
+ DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
+
+ /* Enable the Peripheral */
+ __HAL_DMA2D_ENABLE(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start the multi-source DMA2D Transfer with interrupt enabled.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param SrcAddress1: The source memory Buffer address for the foreground layer.
+ * @param SrcAddress2: The source memory Buffer address for the background layer.
+ * @param DstAddress: The destination memory Buffer address.
+ * @param Width: The width of data to be transferred from source to destination (expressed in number of pixels per line).
+ * @param Height: The height of data to be transferred from source to destination (expressed in number of lines).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LINE(Height));
+ assert_param(IS_DMA2D_PIXEL(Width));
+
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Configure DMA2D Stream source2 address */
+ WRITE_REG(hdma2d->Instance->BGMAR, SrcAddress2);
+
+ /* Configure the source, destination address and the data size */
+ DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
+
+ /* Enable the transfer complete, transfer error and configuration error interrupts */
+ __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC|DMA2D_IT_TE|DMA2D_IT_CE);
+
+ /* Enable the Peripheral */
+ __HAL_DMA2D_ENABLE(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Abort the DMA2D Transfer.
+ * @param hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d)
+{
+ uint32_t tickstart = 0U;
+
+ /* Abort the DMA2D transfer */
+ /* START bit is reset to make sure not to set it again, in the event the HW clears it
+ between the register read and the register write by the CPU (writing 0 has no
+ effect on START bitvalue). */
+ MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_ABORT|DMA2D_CR_START, DMA2D_CR_ABORT);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check if the DMA2D is effectively disabled */
+ while((hdma2d->Instance->CR & DMA2D_CR_START) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > DMA2D_TIMEOUT_ABORT)
+ {
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+ /* Change the DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Disable the Transfer Complete, Transfer Error and Configuration Error interrupts */
+ __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC|DMA2D_IT_TE|DMA2D_IT_CE);
+
+ /* Change the DMA2D state*/
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Suspend the DMA2D Transfer.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d)
+{
+ uint32_t tickstart = 0U;
+
+ /* Suspend the DMA2D transfer */
+ /* START bit is reset to make sure not to set it again, in the event the HW clears it
+ between the register read and the register write by the CPU (writing 0 has no
+ effect on START bitvalue). */
+ MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_SUSP|DMA2D_CR_START, DMA2D_CR_SUSP);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check if the DMA2D is effectively suspended */
+ while (((hdma2d->Instance->CR & DMA2D_CR_SUSP) != DMA2D_CR_SUSP) \
+ && ((hdma2d->Instance->CR & DMA2D_CR_START) == DMA2D_CR_START))
+ {
+ if((HAL_GetTick() - tickstart ) > DMA2D_TIMEOUT_SUSPEND)
+ {
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+ /* Change the DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check whether or not a transfer is actually suspended and change the DMA2D state accordingly */
+ if ((hdma2d->Instance->CR & DMA2D_CR_START) != RESET)
+ {
+ hdma2d->State = HAL_DMA2D_STATE_SUSPEND;
+ }
+ else
+ {
+ /* Make sure SUSP bit is cleared since it is meaningless
+ when no tranfer is on-going */
+ CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resume the DMA2D Transfer.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d)
+{
+ /* Check the SUSP and START bits */
+ if((hdma2d->Instance->CR & (DMA2D_CR_SUSP | DMA2D_CR_START)) == (DMA2D_CR_SUSP | DMA2D_CR_START))
+ {
+ /* Ongoing transfer is suspended: change the DMA2D state before resuming */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+ }
+
+ /* Resume the DMA2D transfer */
+ /* START bit is reset to make sure not to set it again, in the event the HW clears it
+ between the register read and the register write by the CPU (writing 0 has no
+ effect on START bitvalue). */
+ CLEAR_BIT(hdma2d->Instance->CR, (DMA2D_CR_SUSP|DMA2D_CR_START));
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the DMA2D CLUT Transfer.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param LayerIdx: DMA2D Layer index.
+ * This parameter can be one of the following values:
+ * 0(background) / 1(foreground)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LAYER(LayerIdx));
+
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ if(LayerIdx == 0U)
+ {
+ /* Enable the background CLUT loading */
+ SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START);
+ }
+ else
+ {
+ /* Enable the foreground CLUT loading */
+ SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start DMA2D CLUT Loading.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param CLUTCfg: Pointer to a DMA2D_CLUTCfgTypeDef structure that contains
+ * the configuration information for the color look up table.
+ * @param LayerIdx: DMA2D Layer index.
+ * This parameter can be one of the following values:
+ * 0(background) / 1(foreground)
+ * @note Invoking this API is similar to calling HAL_DMA2D_ConfigCLUT() then HAL_DMA2D_EnableCLUT().
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LAYER(LayerIdx));
+ assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode));
+ assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size));
+
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Configure the CLUT of the background DMA2D layer */
+ if(LayerIdx == 0U)
+ {
+ /* Write background CLUT memory address */
+ WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT);
+
+ /* Write background CLUT size and CLUT color mode */
+ MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM),
+ ((CLUTCfg.Size << DMA2D_POSITION_BGPFCCR_CS) | (CLUTCfg.CLUTColorMode << DMA2D_POSITION_BGPFCCR_CCM)));
+
+ /* Enable the CLUT loading for the background */
+ SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START);
+ }
+ /* Configure the CLUT of the foreground DMA2D layer */
+ else
+ {
+ /* Write foreground CLUT memory address */
+ WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT);
+
+ /* Write foreground CLUT size and CLUT color mode */
+ MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM),
+ ((CLUTCfg.Size << DMA2D_POSITION_BGPFCCR_CS) | (CLUTCfg.CLUTColorMode << DMA2D_POSITION_FGPFCCR_CCM)));
+
+ /* Enable the CLUT loading for the foreground */
+ SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start DMA2D CLUT Loading with interrupt enabled.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param CLUTCfg: Pointer to a DMA2D_CLUTCfgTypeDef structure that contains
+ * the configuration information for the color look up table.
+ * @param LayerIdx: DMA2D Layer index.
+ * This parameter can be one of the following values:
+ * 0(background) / 1(foreground)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LAYER(LayerIdx));
+ assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode));
+ assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size));
+
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Configure the CLUT of the background DMA2D layer */
+ if(LayerIdx == 0U)
+ {
+ /* Write background CLUT memory address */
+ WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT);
+
+ /* Write background CLUT size and CLUT color mode */
+ MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM),
+ ((CLUTCfg.Size << DMA2D_POSITION_BGPFCCR_CS) | (CLUTCfg.CLUTColorMode << DMA2D_POSITION_BGPFCCR_CCM)));
+
+ /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */
+ __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE |DMA2D_IT_CAE);
+
+ /* Enable the CLUT loading for the background */
+ SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START);
+ }
+ /* Configure the CLUT of the foreground DMA2D layer */
+ else
+ {
+ /* Write foreground CLUT memory address */
+ WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT);
+
+ /* Write foreground CLUT size and CLUT color mode */
+ MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM),
+ ((CLUTCfg.Size << DMA2D_POSITION_BGPFCCR_CS) | (CLUTCfg.CLUTColorMode << DMA2D_POSITION_FGPFCCR_CCM)));
+
+ /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */
+ __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE |DMA2D_IT_CAE);
+
+ /* Enable the CLUT loading for the foreground */
+ SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Abort the DMA2D CLUT loading.
+ * @param hdma2d : Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param LayerIdx: DMA2D Layer index.
+ * This parameter can be one of the following values:
+ * 0(background) / 1(foreground)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{
+ uint32_t tickstart = 0U;
+ __IO uint32_t * reg = &(hdma2d->Instance->BGPFCCR); /* by default, point at background register */
+
+ /* Abort the CLUT loading */
+ SET_BIT(hdma2d->Instance->CR, DMA2D_CR_ABORT);
+
+ /* If foreground CLUT loading is considered, update local variables */
+ if(LayerIdx == 1)
+ {
+ reg = &(hdma2d->Instance->FGPFCCR);
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check if the CLUT loading is aborted */
+ while((*reg & DMA2D_BGPFCCR_START) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > DMA2D_TIMEOUT_ABORT)
+ {
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+ /* Change the DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Disable the CLUT Transfer Complete, Transfer Error, Configuration Error and CLUT Access Error interrupts */
+ __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE |DMA2D_IT_CAE);
+
+ /* Change the DMA2D state*/
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Suspend the DMA2D CLUT loading.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param LayerIdx: DMA2D Layer index.
+ * This parameter can be one of the following values:
+ * 0(background) / 1(foreground)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{
+ uint32_t tickstart = 0U;
+ __IO uint32_t * reg = &(hdma2d->Instance->BGPFCCR); /* by default, point at background register */
+
+ /* Suspend the CLUT loading */
+ SET_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP);
+
+ /* If foreground CLUT loading is considered, update local variables */
+ if(LayerIdx == 1U)
+ {
+ reg = &(hdma2d->Instance->FGPFCCR);
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check if the CLUT loading is suspended */
+ while (((hdma2d->Instance->CR & DMA2D_CR_SUSP) != DMA2D_CR_SUSP) \
+ && ((*reg & DMA2D_BGPFCCR_START) == DMA2D_BGPFCCR_START))
+ {
+ if((HAL_GetTick() - tickstart ) > DMA2D_TIMEOUT_SUSPEND)
+ {
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+ /* Change the DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check whether or not a transfer is actually suspended and change the DMA2D state accordingly */
+ if ((*reg & DMA2D_BGPFCCR_START) != RESET)
+ {
+ hdma2d->State = HAL_DMA2D_STATE_SUSPEND;
+ }
+ else
+ {
+ /* Make sure SUSP bit is cleared since it is meaningless
+ when no tranfer is on-going */
+ CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resume the DMA2D CLUT loading.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param LayerIdx: DMA2D Layer index.
+ * This parameter can be one of the following values:
+ * 0(background) / 1(foreground)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{
+ /* Check the SUSP and START bits for background or foreground CLUT loading */
+ if(LayerIdx == 0U)
+ {
+ /* Background CLUT loading suspension check */
+ if (((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP)
+ && ((hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START) == DMA2D_BGPFCCR_START))
+ {
+ /* Ongoing CLUT loading is suspended: change the DMA2D state before resuming */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+ }
+ }
+ else
+ {
+ /* Foreground CLUT loading suspension check */
+ if (((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP)
+ && ((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) == DMA2D_FGPFCCR_START))
+ {
+ /* Ongoing CLUT loading is suspended: change the DMA2D state before resuming */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+ }
+ }
+
+ /* Resume the CLUT loading */
+ CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Polling for transfer complete or CLUT loading.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ __IO uint32_t isrflags = 0x0U;
+
+ /* Polling for DMA2D transfer */
+ if((hdma2d->Instance->CR & DMA2D_CR_START) != RESET)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) == RESET)
+ {
+ isrflags = READ_REG(hdma2d->Instance->ISR);
+ if ((isrflags & (DMA2D_FLAG_CE|DMA2D_FLAG_TE)) != RESET)
+ {
+ if ((isrflags & DMA2D_FLAG_CE) != RESET)
+ {
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE;
+ }
+ if ((isrflags & DMA2D_FLAG_TE) != RESET)
+ {
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE;
+ }
+ /* Clear the transfer and configuration error flags */
+ __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE | DMA2D_FLAG_TE);
+
+ /* Change DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_ERROR;
+ }
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+ /* Change the DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_TIMEOUT;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /* Polling for CLUT loading (foreground or background) */
+ if (((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) != RESET) ||
+ ((hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START) != RESET))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CTC) == RESET)
+ {
+ isrflags = READ_REG(hdma2d->Instance->ISR);
+ if ((isrflags & (DMA2D_FLAG_CAE|DMA2D_FLAG_CE|DMA2D_FLAG_TE)) != RESET)
+ {
+ if ((isrflags & DMA2D_FLAG_CAE) != RESET)
+ {
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CAE;
+ }
+ if ((isrflags & DMA2D_FLAG_CE) != RESET)
+ {
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE;
+ }
+ if ((isrflags & DMA2D_FLAG_TE) != RESET)
+ {
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE;
+ }
+ /* Clear the CLUT Access Error, Configuration Error and Transfer Error flags */
+ __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE | DMA2D_FLAG_CE | DMA2D_FLAG_TE);
+
+ /* Change DMA2D state */
+ hdma2d->State= HAL_DMA2D_STATE_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_ERROR;
+ }
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+ /* Change the DMA2D state */
+ hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+
+ /* Clear the transfer complete and CLUT loading flags */
+ __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC|DMA2D_FLAG_CTC);
+
+ /* Change DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+}
+/**
+ * @brief Handle DMA2D interrupt request.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval HAL status
+ */
+void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d)
+{
+ uint32_t isrflags = READ_REG(hdma2d->Instance->ISR);
+ uint32_t crflags = READ_REG(hdma2d->Instance->CR);
+
+ /* Transfer Error Interrupt management ***************************************/
+ if ((isrflags & DMA2D_FLAG_TE) != RESET)
+ {
+ if ((crflags & DMA2D_IT_TE) != RESET)
+ {
+ /* Disable the transfer Error interrupt */
+ __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TE);
+
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE;
+
+ /* Clear the transfer error flag */
+ __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE);
+
+ /* Change DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ if(hdma2d->XferErrorCallback != NULL)
+ {
+ /* Transfer error Callback */
+ hdma2d->XferErrorCallback(hdma2d);
+ }
+ }
+ }
+ /* Configuration Error Interrupt management **********************************/
+ if ((isrflags & DMA2D_FLAG_CE) != RESET)
+ {
+ if ((crflags & DMA2D_IT_CE) != RESET)
+ {
+ /* Disable the Configuration Error interrupt */
+ __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CE);
+
+ /* Clear the Configuration error flag */
+ __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE);
+
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE;
+
+ /* Change DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ if(hdma2d->XferErrorCallback != NULL)
+ {
+ /* Transfer error Callback */
+ hdma2d->XferErrorCallback(hdma2d);
+ }
+ }
+ }
+ /* CLUT access Error Interrupt management ***********************************/
+ if ((isrflags & DMA2D_FLAG_CAE) != RESET)
+ {
+ if ((crflags & DMA2D_IT_CAE) != RESET)
+ {
+ /* Disable the CLUT access error interrupt */
+ __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CAE);
+
+ /* Clear the CLUT access error flag */
+ __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE);
+
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CAE;
+
+ /* Change DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ if(hdma2d->XferErrorCallback != NULL)
+ {
+ /* Transfer error Callback */
+ hdma2d->XferErrorCallback(hdma2d);
+ }
+ }
+ }
+ /* Transfer watermark Interrupt management **********************************/
+ if ((isrflags & DMA2D_FLAG_TW) != RESET)
+ {
+ if ((crflags & DMA2D_IT_TW) != RESET)
+ {
+ /* Disable the transfer watermark interrupt */
+ __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TW);
+
+ /* Clear the transfer watermark flag */
+ __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TW);
+
+ /* Transfer watermark Callback */
+ HAL_DMA2D_LineEventCallback(hdma2d);
+ }
+ }
+ /* Transfer Complete Interrupt management ************************************/
+ if ((isrflags & DMA2D_FLAG_TC) != RESET)
+ {
+ if ((crflags & DMA2D_IT_TC) != RESET)
+ {
+ /* Disable the transfer complete interrupt */
+ __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC);
+
+ /* Clear the transfer complete flag */
+ __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC);
+
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE;
+
+ /* Change DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ if(hdma2d->XferCpltCallback != NULL)
+ {
+ /* Transfer complete Callback */
+ hdma2d->XferCpltCallback(hdma2d);
+ }
+ }
+ }
+ /* CLUT Transfer Complete Interrupt management ******************************/
+ if ((isrflags & DMA2D_FLAG_CTC) != RESET)
+ {
+ if ((crflags & DMA2D_IT_CTC) != RESET)
+ {
+ /* Disable the CLUT transfer complete interrupt */
+ __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CTC);
+
+ /* Clear the CLUT transfer complete flag */
+ __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CTC);
+
+ /* Update error code */
+ hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE;
+
+ /* Change DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ /* CLUT Transfer complete Callback */
+ HAL_DMA2D_CLUTLoadingCpltCallback(hdma2d);
+ }
+ }
+}
+
+/**
+ * @brief Transfer watermark callback.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval None
+ */
+__weak void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma2d);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_DMA2D_LineEventCallback can be implemented in the user file.
+ */
+}
+
+/**
+ * @brief CLUT Transfer Complete callback.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval None
+ */
+__weak void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma2d);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_DMA2D_CLUTLoadingCpltCallback can be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the DMA2D foreground or background layer parameters.
+ (+) Configure the DMA2D CLUT transfer.
+ (+) Configure the line watermark
+ (+) Configure the dead time value.
+ (+) Enable or disable the dead time value functionality.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the DMA2D Layer according to the specified
+ * parameters in the DMA2D_InitTypeDef and create the associated handle.
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param LayerIdx: DMA2D Layer index.
+ * This parameter can be one of the following values:
+ * 0(background) / 1(foreground)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{
+ DMA2D_LayerCfgTypeDef *pLayerCfg = &hdma2d->LayerCfg[LayerIdx];
+ uint32_t regValue = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LAYER(LayerIdx));
+ assert_param(IS_DMA2D_OFFSET(pLayerCfg->InputOffset));
+ if(hdma2d->Init.Mode != DMA2D_R2M)
+ {
+ assert_param(IS_DMA2D_INPUT_COLOR_MODE(pLayerCfg->InputColorMode));
+ if(hdma2d->Init.Mode != DMA2D_M2M)
+ {
+ assert_param(IS_DMA2D_ALPHA_MODE(pLayerCfg->AlphaMode));
+ }
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* DMA2D BGPFCR register configuration -----------------------------------*/
+ /* Prepare the value to be written to the BGPFCCR register */
+
+ if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8))
+ {
+ regValue = pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << DMA2D_POSITION_BGPFCCR_AM) | (pLayerCfg->InputAlpha & DMA2D_BGPFCCR_ALPHA);
+ }
+ else
+ {
+ regValue = pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << DMA2D_POSITION_BGPFCCR_AM) | (pLayerCfg->InputAlpha << DMA2D_POSITION_BGPFCCR_ALPHA);
+ }
+
+ /* Configure the background DMA2D layer */
+ if(LayerIdx == 0)
+ {
+ /* Write DMA2D BGPFCCR register */
+ MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CM | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_ALPHA), regValue);
+
+ /* DMA2D BGOR register configuration -------------------------------------*/
+ WRITE_REG(hdma2d->Instance->BGOR, pLayerCfg->InputOffset);
+
+ /* DMA2D BGCOLR register configuration -------------------------------------*/
+ if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8))
+ {
+ WRITE_REG(hdma2d->Instance->BGCOLR, pLayerCfg->InputAlpha & (DMA2D_BGCOLR_BLUE|DMA2D_BGCOLR_GREEN|DMA2D_BGCOLR_RED));
+ }
+ }
+ /* Configure the foreground DMA2D layer */
+ else
+ {
+ /* Write DMA2D FGPFCCR register */
+ MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_BGPFCCR_CM | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_ALPHA), regValue);
+
+ /* DMA2D FGOR register configuration -------------------------------------*/
+ WRITE_REG(hdma2d->Instance->FGOR, pLayerCfg->InputOffset);
+
+ /* DMA2D FGCOLR register configuration -------------------------------------*/
+ if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8))
+ {
+ WRITE_REG(hdma2d->Instance->FGCOLR, pLayerCfg->InputAlpha & (DMA2D_FGCOLR_BLUE|DMA2D_FGCOLR_GREEN|DMA2D_FGCOLR_RED));
+ }
+ }
+ /* Initialize the DMA2D state*/
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DMA2D CLUT Transfer.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param CLUTCfg: Pointer to a DMA2D_CLUTCfgTypeDef structure that contains
+ * the configuration information for the color look up table.
+ * @param LayerIdx: DMA2D Layer index.
+ * This parameter can be one of the following values:
+ * 0(background) / 1(foreground)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LAYER(LayerIdx));
+ assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode));
+ assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size));
+
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Configure the CLUT of the background DMA2D layer */
+ if(LayerIdx == 0U)
+ {
+ /* Write background CLUT memory address */
+ WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT);
+
+ /* Write background CLUT size and CLUT color mode */
+ MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM),
+ ((CLUTCfg.Size << DMA2D_POSITION_BGPFCCR_CS) | (CLUTCfg.CLUTColorMode << DMA2D_POSITION_BGPFCCR_CCM)));
+ }
+ /* Configure the CLUT of the foreground DMA2D layer */
+ else
+ {
+ /* Write foreground CLUT memory address */
+ WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT);
+
+ /* Write foreground CLUT size and CLUT color mode */
+ MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM),
+ ((CLUTCfg.Size << DMA2D_POSITION_BGPFCCR_CS) | (CLUTCfg.CLUTColorMode << DMA2D_POSITION_FGPFCCR_CCM)));
+ }
+
+ /* Set the DMA2D state to Ready */
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the line watermark.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @param Line: Line Watermark configuration (maximum 16-bit long value expected).
+ * @note HAL_DMA2D_ProgramLineEvent() API enables the transfer watermark interrupt.
+ * @note The transfer watermark interrupt is disabled once it has occurred.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA2D_LINEWATERMARK(Line));
+
+ if (Line > DMA2D_LWR_LW)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process locked */
+ __HAL_LOCK(hdma2d);
+
+ /* Change DMA2D peripheral state */
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Sets the Line watermark configuration */
+ WRITE_REG(hdma2d->Instance->LWR, Line);
+
+ /* Enable the Line interrupt */
+ __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TW);
+
+ /* Initialize the DMA2D state */
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Enable DMA2D dead time feature.
+ * @param hdma2d: DMA2D handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d)
+{
+ /* Process Locked */
+ __HAL_LOCK(hdma2d);
+
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Set DMA2D_AMTCR EN bit */
+ SET_BIT(hdma2d->Instance->AMTCR, DMA2D_AMTCR_EN);
+
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable DMA2D dead time feature.
+ * @param hdma2d: DMA2D handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d)
+{
+ /* Process Locked */
+ __HAL_LOCK(hdma2d);
+
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Clear DMA2D_AMTCR EN bit */
+ CLEAR_BIT(hdma2d->Instance->AMTCR, DMA2D_AMTCR_EN);
+
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure dead time.
+ * @note The dead time value represents the guaranteed minimum number of cycles between
+ * two consecutive transactions on the AHB bus.
+ * @param hdma2d: DMA2D handle.
+ * @param DeadTime: dead time value.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime)
+{
+ /* Process Locked */
+ __HAL_LOCK(hdma2d);
+
+ hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+ /* Set DMA2D_AMTCR DT field */
+ MODIFY_REG(hdma2d->Instance->AMTCR, DMA2D_AMTCR_DT, (((uint32_t) DeadTime) << DMA2D_POSITION_AMTCR_DT));
+
+ hdma2d->State = HAL_DMA2D_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma2d);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to :
+ (+) Get the DMA2D state
+ (+) Get the DMA2D error code
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the DMA2D state
+ * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the DMA2D.
+ * @retval HAL state
+ */
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d)
+{
+ return hdma2d->State;
+}
+
+/**
+ * @brief Return the DMA2D error code
+ * @param hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for DMA2D.
+ * @retval DMA2D Error Code
+ */
+uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d)
+{
+ return hdma2d->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Private_Functions DMA2D Private Functions
+ * @{
+ */
+
+/**
+ * @brief Set the DMA2D transfer parameters.
+ * @param hdma2d: Pointer to a DMA2D_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA2D.
+ * @param pdata: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param Width: The width of data to be transferred from source to destination.
+ * @param Height: The height of data to be transferred from source to destination.
+ * @retval HAL status
+ */
+static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
+{
+ uint32_t tmp = 0U;
+ uint32_t tmp1 = 0U;
+ uint32_t tmp2 = 0U;
+ uint32_t tmp3 = 0U;
+ uint32_t tmp4 = 0U;
+
+ /* Configure DMA2D data size */
+ MODIFY_REG(hdma2d->Instance->NLR, (DMA2D_NLR_NL|DMA2D_NLR_PL), (Height| (Width << DMA2D_POSITION_NLR_PL)));
+
+ /* Configure DMA2D destination address */
+ WRITE_REG(hdma2d->Instance->OMAR, DstAddress);
+
+ /* Register to memory DMA2D mode selected */
+ if (hdma2d->Init.Mode == DMA2D_R2M)
+ {
+ tmp1 = pdata & DMA2D_OCOLR_ALPHA_1;
+ tmp2 = pdata & DMA2D_OCOLR_RED_1;
+ tmp3 = pdata & DMA2D_OCOLR_GREEN_1;
+ tmp4 = pdata & DMA2D_OCOLR_BLUE_1;
+
+ /* Prepare the value to be written to the OCOLR register according to the color mode */
+ if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_ARGB8888)
+ {
+ tmp = (tmp3 | tmp2 | tmp1| tmp4);
+ }
+ else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_RGB888)
+ {
+ tmp = (tmp3 | tmp2 | tmp4);
+ }
+ else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_RGB565)
+ {
+ tmp2 = (tmp2 >> 19U);
+ tmp3 = (tmp3 >> 10U);
+ tmp4 = (tmp4 >> 3U);
+ tmp = ((tmp3 << 5U) | (tmp2 << 11U) | tmp4);
+ }
+ else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_ARGB1555)
+ {
+ tmp1 = (tmp1 >> 31U);
+ tmp2 = (tmp2 >> 19U);
+ tmp3 = (tmp3 >> 11U);
+ tmp4 = (tmp4 >> 3U);
+ tmp = ((tmp3 << 5U) | (tmp2 << 10U) | (tmp1 << 15U) | tmp4);
+ }
+ else /* Dhdma2d->Init.ColorMode = DMA2D_OUTPUT_ARGB4444 */
+ {
+ tmp1 = (tmp1 >> 28U);
+ tmp2 = (tmp2 >> 20U);
+ tmp3 = (tmp3 >> 12U);
+ tmp4 = (tmp4 >> 4U);
+ tmp = ((tmp3 << 4U) | (tmp2 << 8U) | (tmp1 << 12U) | tmp4);
+ }
+ /* Write to DMA2D OCOLR register */
+ WRITE_REG(hdma2d->Instance->OCOLR, tmp);
+ }
+ else /* M2M, M2M_PFC or M2M_Blending DMA2D Mode */
+ {
+ /* Configure DMA2D source address */
+ WRITE_REG(hdma2d->Instance->FGMAR, pdata);
+ }
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,577 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma2d.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of DMA2D HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA2D_H
+#define __STM32F4xx_HAL_DMA2D_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA2D DMA2D
+ * @brief DMA2D HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Types DMA2D Exported Types
+ * @{
+ */
+#define MAX_DMA2D_LAYER 2U
+
+/**
+ * @brief DMA2D color Structure definition
+ */
+typedef struct
+{
+ uint32_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+} DMA2D_ColorTypeDef;
+
+/**
+ * @brief DMA2D CLUT Structure definition
+ */
+typedef struct
+{
+ uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/
+
+ uint32_t CLUTColorMode; /*!< Configures the DMA2D CLUT color mode.
+ This parameter can be one value of @ref DMA2D_CLUT_CM. */
+
+ uint32_t Size; /*!< Configures the DMA2D CLUT size.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+} DMA2D_CLUTCfgTypeDef;
+
+/**
+ * @brief DMA2D Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Configures the DMA2D transfer mode.
+ This parameter can be one value of @ref DMA2D_Mode. */
+
+ uint32_t ColorMode; /*!< Configures the color format of the output image.
+ This parameter can be one value of @ref DMA2D_Output_Color_Mode. */
+
+ uint32_t OutputOffset; /*!< Specifies the Offset value.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+} DMA2D_InitTypeDef;
+
+/**
+ * @brief DMA2D Layer structure definition
+ */
+typedef struct
+{
+ uint32_t InputOffset; /*!< Configures the DMA2D foreground or background offset.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+ uint32_t InputColorMode; /*!< Configures the DMA2D foreground or background color mode.
+ This parameter can be one value of @ref DMA2D_Input_Color_Mode. */
+
+ uint32_t AlphaMode; /*!< Configures the DMA2D foreground or background alpha mode.
+ This parameter can be one value of @ref DMA2D_Alpha_Mode. */
+
+ uint32_t InputAlpha; /*!< Specifies the DMA2D foreground or background alpha value and color value in case of A8 or A4 color mode.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF except for the color modes detailed below.
+ @note In case of A8 or A4 color mode (ARGB), this parameter must be a number between
+ Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF where
+ - InputAlpha[24:31] is the alpha value ALPHA[0:7]
+ - InputAlpha[16:23] is the red value RED[0:7]
+ - InputAlpha[8:15] is the green value GREEN[0:7]
+ - InputAlpha[0:7] is the blue value BLUE[0:7]. */
+
+} DMA2D_LayerCfgTypeDef;
+
+/**
+ * @brief HAL DMA2D State structures definition
+ */
+typedef enum
+{
+ HAL_DMA2D_STATE_RESET = 0x00U, /*!< DMA2D not yet initialized or disabled */
+ HAL_DMA2D_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_DMA2D_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_DMA2D_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_DMA2D_STATE_ERROR = 0x04U, /*!< DMA2D state error */
+ HAL_DMA2D_STATE_SUSPEND = 0x05U /*!< DMA2D process is suspended */
+}HAL_DMA2D_StateTypeDef;
+
+/**
+ * @brief DMA2D handle Structure definition
+ */
+typedef struct __DMA2D_HandleTypeDef
+{
+ DMA2D_TypeDef *Instance; /*!< DMA2D register base address. */
+
+ DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters. */
+
+ void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback. */
+
+ void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback. */
+
+ DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA2D lock. */
+
+ __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state. */
+
+ __IO uint32_t ErrorCode; /*!< DMA2D error code. */
+} DMA2D_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants
+ * @{
+ */
+
+/** @defgroup DMA2D_Error_Code DMA2D Error Code
+ * @{
+ */
+#define HAL_DMA2D_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_DMA2D_ERROR_TE ((uint32_t)0x00000001U) /*!< Transfer error */
+#define HAL_DMA2D_ERROR_CE ((uint32_t)0x00000002U) /*!< Configuration error */
+#define HAL_DMA2D_ERROR_CAE ((uint32_t)0x00000004U) /*!< CLUT access error */
+#define HAL_DMA2D_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Mode DMA2D Mode
+ * @{
+ */
+#define DMA2D_M2M ((uint32_t)0x00000000U) /*!< DMA2D memory to memory transfer mode */
+#define DMA2D_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */
+#define DMA2D_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */
+#define DMA2D_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Output_Color_Mode DMA2D Output Color Mode
+ * @{
+ */
+#define DMA2D_OUTPUT_ARGB8888 ((uint32_t)0x00000000U) /*!< ARGB8888 DMA2D color mode */
+#define DMA2D_OUTPUT_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 DMA2D color mode */
+#define DMA2D_OUTPUT_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 DMA2D color mode */
+#define DMA2D_OUTPUT_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 DMA2D color mode */
+#define DMA2D_OUTPUT_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 DMA2D color mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode
+ * @{
+ */
+#define DMA2D_INPUT_ARGB8888 ((uint32_t)0x00000000U) /*!< ARGB8888 color mode */
+#define DMA2D_INPUT_RGB888 ((uint32_t)0x00000001U) /*!< RGB888 color mode */
+#define DMA2D_INPUT_RGB565 ((uint32_t)0x00000002U) /*!< RGB565 color mode */
+#define DMA2D_INPUT_ARGB1555 ((uint32_t)0x00000003U) /*!< ARGB1555 color mode */
+#define DMA2D_INPUT_ARGB4444 ((uint32_t)0x00000004U) /*!< ARGB4444 color mode */
+#define DMA2D_INPUT_L8 ((uint32_t)0x00000005U) /*!< L8 color mode */
+#define DMA2D_INPUT_AL44 ((uint32_t)0x00000006U) /*!< AL44 color mode */
+#define DMA2D_INPUT_AL88 ((uint32_t)0x00000007U) /*!< AL88 color mode */
+#define DMA2D_INPUT_L4 ((uint32_t)0x00000008U) /*!< L4 color mode */
+#define DMA2D_INPUT_A8 ((uint32_t)0x00000009U) /*!< A8 color mode */
+#define DMA2D_INPUT_A4 ((uint32_t)0x0000000AU) /*!< A4 color mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Alpha_Mode DMA2D Alpha Mode
+ * @{
+ */
+#define DMA2D_NO_MODIF_ALPHA ((uint32_t)0x00000000U) /*!< No modification of the alpha channel value */
+#define DMA2D_REPLACE_ALPHA ((uint32_t)0x00000001U) /*!< Replace original alpha channel value by programmed alpha value */
+#define DMA2D_COMBINE_ALPHA ((uint32_t)0x00000002U) /*!< Replace original alpha channel value by programmed alpha value
+ with original alpha channel value */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_CLUT_CM DMA2D CLUT Color Mode
+ * @{
+ */
+#define DMA2D_CCM_ARGB8888 ((uint32_t)0x00000000U) /*!< ARGB8888 DMA2D CLUT color mode */
+#define DMA2D_CCM_RGB888 ((uint32_t)0x00000001U) /*!< RGB888 DMA2D CLUT color mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Interrupts DMA2D Interrupts
+ * @{
+ */
+#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */
+#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */
+#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */
+#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */
+#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */
+#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Flags DMA2D Flags
+ * @{
+ */
+#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */
+#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */
+#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */
+#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Aliases DMA2D API Aliases
+ * @{
+ */
+#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort for compatibility with legacy code */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros
+ * @{
+ */
+
+/** @brief Reset DMA2D handle state
+ * @param __HANDLE__: specifies the DMA2D handle.
+ * @retval None
+ */
+#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
+
+/**
+ * @brief Enable the DMA2D.
+ * @param __HANDLE__: DMA2D handle
+ * @retval None.
+ */
+#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: CLUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval The state of FLAG.
+ */
+#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clear the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: CLUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval None
+ */
+#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
+
+/**
+ * @brief Enable the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: CLUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: CLUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified DMA2D interrupt source is enabled or not.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: CLUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval The state of INTERRUPT source.
+ */
+#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA2D_Exported_Functions DMA2D Exported Functions
+ * @{
+ */
+
+/** @addtogroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
+void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA2D_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
+void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
+void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d);
+void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA2D_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
+HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions
+ * @{
+ */
+
+/* Peripheral State functions ***************************************************/
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
+uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @addtogroup DMA2D_Private_Constants DMA2D Private Constants
+ * @{
+ */
+
+/** @defgroup DMA2D_Maximum_Line_WaterMark DMA2D Maximum Line Watermark
+ * @{
+ */
+#define DMA2D_LINE_WATERMARK_MAX DMA2D_LWR_LW /*!< DMA2D maximum line watermark */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Color_Value DMA2D Color Value
+ * @{
+ */
+#define DMA2D_COLOR_VALUE ((uint32_t)0x000000FFU) /*!< Color value mask */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Max_Layer DMA2D Maximum Number of Layers
+ * @{
+ */
+#define DMA2D_MAX_LAYER 2U /*!< DMA2D maximum number of layers */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Offset DMA2D Offset
+ * @{
+ */
+#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< Line Offset */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Size DMA2D Size
+ * @{
+ */
+#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16U) /*!< DMA2D number of pixels per line */
+#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D number of lines */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_CLUT_Size DMA2D CLUT Size
+ * @{
+ */
+#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8U) /*!< DMA2D CLUT size */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Macros DMA2D Private Macros
+ * @{
+ */
+#define IS_DMA2D_LAYER(LAYER) ((LAYER) <= DMA2D_MAX_LAYER)
+#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
+ ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
+#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_OUTPUT_ARGB8888) || ((MODE_ARGB) == DMA2D_OUTPUT_RGB888) || \
+ ((MODE_ARGB) == DMA2D_OUTPUT_RGB565) || ((MODE_ARGB) == DMA2D_OUTPUT_ARGB1555) || \
+ ((MODE_ARGB) == DMA2D_OUTPUT_ARGB4444))
+#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= DMA2D_COLOR_VALUE)
+#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)
+#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)
+#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)
+#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == DMA2D_INPUT_ARGB8888) || ((INPUT_CM) == DMA2D_INPUT_RGB888) || \
+ ((INPUT_CM) == DMA2D_INPUT_RGB565) || ((INPUT_CM) == DMA2D_INPUT_ARGB1555) || \
+ ((INPUT_CM) == DMA2D_INPUT_ARGB4444) || ((INPUT_CM) == DMA2D_INPUT_L8) || \
+ ((INPUT_CM) == DMA2D_INPUT_AL44) || ((INPUT_CM) == DMA2D_INPUT_AL88) || \
+ ((INPUT_CM) == DMA2D_INPUT_L4) || ((INPUT_CM) == DMA2D_INPUT_A8) || \
+ ((INPUT_CM) == DMA2D_INPUT_A4))
+#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
+ ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \
+ ((AlphaMode) == DMA2D_COMBINE_ALPHA))
+
+#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
+#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
+#define IS_DMA2D_LINEWATERMARK(LineWatermark) ((LineWatermark) <= DMA2D_LINE_WATERMARK_MAX)
+#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
+ ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
+ ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
+#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
+ ((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
+ ((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA2D_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,333 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief DMA Extension HAL module driver
+ * This file provides firmware functions to manage the following
+ * functionalities of the DMA Extension peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The DMA Extension HAL driver can be used as follows:
+ (#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
+ for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
+
+ -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
+ -@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default.
+ -@- In Multi (Double) buffer mode, it is possible to update the base address for
+ the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMAEx DMAEx
+ * @brief DMA Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private Constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMAEx_Private_Functions
+ * @{
+ */
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @addtogroup DMAEx_Exported_Functions
+ * @{
+ */
+
+
+/** @addtogroup DMAEx_Exported_Functions_Group1
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the source, destination address and data length and
+ Start MultiBuffer DMA transfer
+ (+) Configure the source, destination address and data length and
+ Start MultiBuffer DMA transfer with interrupt
+ (+) Change on the fly the memory0 or memory1 address.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Starts the multi_buffer DMA Transfer.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
+ * @param DataLength: The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Memory-to-memory transfer not supported in double buffering mode */
+ if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Process Locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Enable the double buffer mode */
+ hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M1AR = SecondMemAddress;
+
+ /* Configure the source, destination address and the data length */
+ DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+ }
+ return status;
+}
+
+/**
+ * @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
+ * @param DataLength: The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Memory-to-memory transfer not supported in double buffering mode */
+ if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ return HAL_ERROR;
+ }
+
+ /* Check callback functions */
+ if ((NULL == hdma->XferCpltCallback) || (NULL == hdma->XferM1CpltCallback) || (NULL == hdma->XferErrorCallback))
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Enable the Double buffer mode */
+ hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M1AR = SecondMemAddress;
+
+ /* Configure the source, destination address and the data length */
+ DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Clear all flags */
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
+
+ /* Enable Common interrupts*/
+ hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
+ hdma->Instance->FCR |= DMA_IT_FE;
+
+ if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+ {
+ hdma->Instance->CR |= DMA_IT_HT;
+ }
+
+ /* Enable the peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+ return status;
+}
+
+/**
+ * @brief Change the memory0 or memory1 address on the fly.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param Address: The new address
+ * @param memory: the memory to be changed, This parameter can be one of
+ * the following values:
+ * MEMORY0 /
+ * MEMORY1
+ * @note The MEMORY0 address can be changed only when the current transfer use
+ * MEMORY1 and the MEMORY1 address can be changed only when the current
+ * transfer use MEMORY0.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
+{
+ if(memory == MEMORY0)
+ {
+ /* change the memory0 address */
+ hdma->Instance->M0AR = Address;
+ }
+ else
+ {
+ /* change the memory1 address */
+ hdma->Instance->M1AR = Address;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMAEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Set the DMA Transfer parameter.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress: The source memory Buffer address
+ * @param DstAddress: The destination memory Buffer address
+ * @param DataLength: The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Configure DMA Stream data length */
+ hdma->Instance->NDTR = DataLength;
+
+ /* Peripheral to Memory */
+ if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+ {
+ /* Configure DMA Stream destination address */
+ hdma->Instance->PAR = DstAddress;
+
+ /* Configure DMA Stream source address */
+ hdma->Instance->M0AR = SrcAddress;
+ }
+ /* Memory to Peripheral */
+ else
+ {
+ /* Configure DMA Stream source address */
+ hdma->Instance->PAR = SrcAddress;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M0AR = DstAddress;
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,122 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of DMA HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_EX_H
+#define __STM32F4xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
+ * @brief DMAEx Exported types
+ * @{
+ */
+
+/**
+ * @brief HAL DMA Memory definition
+ */
+typedef enum
+{
+ MEMORY0 = 0x00U, /*!< Memory 0 */
+ MEMORY1 = 0x01U /*!< Memory 1 */
+}HAL_DMA_MemoryTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
+ * @brief DMAEx Exported functions
+ * @{
+ */
+
+/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
+ * @brief DMAEx Private functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DMA_EX_H*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2261 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dsi.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief DSI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the DSI peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @addtogroup DSI
+ * @{
+ */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private types -------------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @addtogroup DSI_Private_Constants
+ * @{
+ */
+#define DSI_TIMEOUT_VALUE ((uint32_t)1000U) /* 1s */
+
+#define DSI_ERROR_ACK_MASK (DSI_ISR0_AE0 | DSI_ISR0_AE1 | DSI_ISR0_AE2 | DSI_ISR0_AE3 | \
+ DSI_ISR0_AE4 | DSI_ISR0_AE5 | DSI_ISR0_AE6 | DSI_ISR0_AE7 | \
+ DSI_ISR0_AE8 | DSI_ISR0_AE9 | DSI_ISR0_AE10 | DSI_ISR0_AE11 | \
+ DSI_ISR0_AE12 | DSI_ISR0_AE13 | DSI_ISR0_AE14 | DSI_ISR0_AE15)
+#define DSI_ERROR_PHY_MASK (DSI_ISR0_PE0 | DSI_ISR0_PE1 | DSI_ISR0_PE2 | DSI_ISR0_PE3 | DSI_ISR0_PE4)
+#define DSI_ERROR_TX_MASK DSI_ISR1_TOHSTX
+#define DSI_ERROR_RX_MASK DSI_ISR1_TOLPRX
+#define DSI_ERROR_ECC_MASK (DSI_ISR1_ECCSE | DSI_ISR1_ECCME)
+#define DSI_ERROR_CRC_MASK DSI_ISR1_CRCE
+#define DSI_ERROR_PSE_MASK DSI_ISR1_PSE
+#define DSI_ERROR_EOT_MASK DSI_ISR1_EOTPE
+#define DSI_ERROR_OVF_MASK DSI_ISR1_LPWRE
+#define DSI_ERROR_GEN_MASK (DSI_ISR1_GCWRE | DSI_ISR1_GPWRE | DSI_ISR1_GPTXE | DSI_ISR1_GPRDE | DSI_ISR1_GPRXE)
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx, uint32_t ChannelID, uint32_t DataType, uint32_t Data0, uint32_t Data1);
+
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @brief Generic DSI packet header configuration
+ * @param DSIx: Pointer to DSI register base
+ * @param ChannelID: Virtual channel ID of the header packet
+ * @param DataType: Packet data type of the header packet
+ * This parameter can be any value of :
+ * @ref DSI_SHORT_WRITE_PKT_Data_Type
+ * or @ref DSI_LONG_WRITE_PKT_Data_Type
+ * or @ref DSI_SHORT_READ_PKT_Data_Type
+ * or DSI_MAX_RETURN_PKT_SIZE
+ * @param Data0: Word count LSB
+ * @param Data1: Word count MSB
+ * @retval None
+ */
+static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx,
+ uint32_t ChannelID,
+ uint32_t DataType,
+ uint32_t Data0,
+ uint32_t Data1)
+{
+ /* Update the DSI packet header with new information */
+ DSIx->GHCR = (DataType | (ChannelID<<6U) | (Data0<<8U) | (Data1<<16U));
+}
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DSI_Exported_Functions
+ * @{
+ */
+
+/** @defgroup DSI_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the DSI
+ (+) De-initialize the DSI
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the DSI according to the specified
+ * parameters in the DSI_InitTypeDef and create the associated handle.
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param PLLInit: pointer to a DSI_PLLInitTypeDef structure that contains
+ * the PLL Clock structure definition for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Init(DSI_HandleTypeDef *hdsi, DSI_PLLInitTypeDef *PLLInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t unitIntervalx4 = 0U;
+ uint32_t tempIDF = 0U;
+
+ /* Check the DSI handle allocation */
+ if(hdsi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check function parameters */
+ assert_param(IS_DSI_PLL_NDIV(PLLInit->PLLNDIV));
+ assert_param(IS_DSI_PLL_IDF(PLLInit->PLLIDF));
+ assert_param(IS_DSI_PLL_ODF(PLLInit->PLLODF));
+ assert_param(IS_DSI_AUTO_CLKLANE_CONTROL(hdsi->Init.AutomaticClockLaneControl));
+ assert_param(IS_DSI_NUMBER_OF_LANES(hdsi->Init.NumberOfLanes));
+
+ if(hdsi->State == HAL_DSI_STATE_RESET)
+ {
+ /* Initialize the low level hardware */
+ HAL_DSI_MspInit(hdsi);
+ }
+
+ /* Change DSI peripheral state */
+ hdsi->State = HAL_DSI_STATE_BUSY;
+
+ /**************** Turn on the regulator and enable the DSI PLL ****************/
+
+ /* Enable the regulator */
+ __HAL_DSI_REG_ENABLE(hdsi);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the regulator is ready */
+ while(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_RRS) == RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the PLL division factors */
+ hdsi->Instance->WRPCR &= ~(DSI_WRPCR_PLL_NDIV | DSI_WRPCR_PLL_IDF | DSI_WRPCR_PLL_ODF);
+ hdsi->Instance->WRPCR |= (((PLLInit->PLLNDIV)<<2U) | ((PLLInit->PLLIDF)<<11U) | ((PLLInit->PLLODF)<<16U));
+
+ /* Enable the DSI PLL */
+ __HAL_DSI_PLL_ENABLE(hdsi);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for the lock of the PLL */
+ while(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*************************** Set the PHY parameters ***************************/
+
+ /* D-PHY clock and digital enable*/
+ hdsi->Instance->PCTLR |= (DSI_PCTLR_CKE | DSI_PCTLR_DEN);
+
+ /* Clock lane configuration */
+ hdsi->Instance->CLCR &= ~(DSI_CLCR_DPCC | DSI_CLCR_ACR);
+ hdsi->Instance->CLCR |= (DSI_CLCR_DPCC | hdsi->Init.AutomaticClockLaneControl);
+
+ /* Configure the number of active data lanes */
+ hdsi->Instance->PCONFR &= ~DSI_PCONFR_NL;
+ hdsi->Instance->PCONFR |= hdsi->Init.NumberOfLanes;
+
+ /************************ Set the DSI clock parameters ************************/
+
+ /* Set the TX escape clock division factor */
+ hdsi->Instance->CCR &= ~DSI_CCR_TXECKDIV;
+ hdsi->Instance->CCR = hdsi->Init.TXEscapeCkdiv;
+
+ /* Calculate the bit period in high-speed mode in unit of 0.25 ns (UIX4) */
+ /* The equation is : UIX4 = IntegerPart( (1000/F_PHY_Mhz) * 4 ) */
+ /* Where : F_PHY_Mhz = (NDIV * HSE_Mhz) / (IDF * ODF) */
+ tempIDF = (PLLInit->PLLIDF > 0U) ? PLLInit->PLLIDF : 1U;
+ unitIntervalx4 = (4000000U * tempIDF * (1U << PLLInit->PLLODF)) / ((HSE_VALUE/1000U) * PLLInit->PLLNDIV);
+
+ /* Set the bit period in high-speed mode */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_UIX4;
+ hdsi->Instance->WPCR[0U] |= unitIntervalx4;
+
+ /****************************** Error management *****************************/
+
+ /* Disable all error interrupts and reset the Error Mask */
+ hdsi->Instance->IER[0U] = 0U;
+ hdsi->Instance->IER[1U] = 0U;
+ hdsi->ErrorMsk = 0U;
+
+ /* Initialise the error code */
+ hdsi->ErrorCode = HAL_DSI_ERROR_NONE;
+
+ /* Initialize the DSI state*/
+ hdsi->State = HAL_DSI_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De-initializes the DSI peripheral registers to their default reset
+ * values.
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_DeInit(DSI_HandleTypeDef *hdsi)
+{
+ /* Check the DSI handle allocation */
+ if(hdsi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change DSI peripheral state */
+ hdsi->State = HAL_DSI_STATE_BUSY;
+
+ /* Disable the DSI wrapper */
+ __HAL_DSI_WRAPPER_DISABLE(hdsi);
+
+ /* Disable the DSI host */
+ __HAL_DSI_DISABLE(hdsi);
+
+ /* D-PHY clock and digital disable */
+ hdsi->Instance->PCTLR &= ~(DSI_PCTLR_CKE | DSI_PCTLR_DEN);
+
+ /* Turn off the DSI PLL */
+ __HAL_DSI_PLL_DISABLE(hdsi);
+
+ /* Disable the regulator */
+ __HAL_DSI_REG_DISABLE(hdsi);
+
+ /* DeInit the low level hardware */
+ HAL_DSI_MspDeInit(hdsi);
+
+ /* Initialise the error code */
+ hdsi->ErrorCode = HAL_DSI_ERROR_NONE;
+
+ /* Initialize the DSI state*/
+ hdsi->State = HAL_DSI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Return the DSI error code
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval DSI Error Code
+ */
+uint32_t HAL_DSI_GetError(DSI_HandleTypeDef *hdsi)
+{
+ /* Get the error code */
+ return hdsi->ErrorCode;
+}
+
+/**
+ * @brief Enable the error monitor flags
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ActiveErrors: indicates which error interrupts will be enabled.
+ * This parameter can be any combination of @ref DSI_Error_Data_Type.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigErrorMonitor(DSI_HandleTypeDef *hdsi, uint32_t ActiveErrors)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ hdsi->Instance->IER[0U] = 0U;
+ hdsi->Instance->IER[1U] = 0U;
+
+ /* Store active errors to the handle */
+ hdsi->ErrorMsk = ActiveErrors;
+
+ if((ActiveErrors & HAL_DSI_ERROR_ACK) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[0U] |= DSI_ERROR_ACK_MASK;
+ }
+
+ if((ActiveErrors & HAL_DSI_ERROR_PHY) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[0U] |= DSI_ERROR_PHY_MASK;
+ }
+
+ if((ActiveErrors & HAL_DSI_ERROR_TX) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_TX_MASK;
+ }
+
+ if((ActiveErrors & HAL_DSI_ERROR_RX) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_RX_MASK;
+ }
+
+ if((ActiveErrors & HAL_DSI_ERROR_ECC) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_ECC_MASK;
+ }
+
+ if((ActiveErrors & HAL_DSI_ERROR_CRC) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_CRC_MASK;
+ }
+
+ if((ActiveErrors & HAL_DSI_ERROR_PSE) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_PSE_MASK;
+ }
+
+ if((ActiveErrors & HAL_DSI_ERROR_EOT) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_EOT_MASK;
+ }
+
+ if((ActiveErrors & HAL_DSI_ERROR_OVF) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_OVF_MASK;
+ }
+
+ if((ActiveErrors & HAL_DSI_ERROR_GEN) != RESET)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_GEN_MASK;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DSI MSP.
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_MspInit(DSI_HandleTypeDef* hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-initializes the DSI MSP.
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_MspDeInit(DSI_HandleTypeDef* hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides function allowing to:
+ (+) Handle DSI interrupt request
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Handles DSI interrupt request.
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+void HAL_DSI_IRQHandler(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t ErrorStatus0, ErrorStatus1;
+
+ /* Tearing Effect Interrupt management ***************************************/
+ if(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_TE) != RESET)
+ {
+ if(__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_TE) != RESET)
+ {
+ /* Clear the Tearing Effect Interrupt Flag */
+ __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_TE);
+
+ /* Tearing Effect Callback */
+ HAL_DSI_TearingEffectCallback(hdsi);
+ }
+ }
+
+ /* End of Refresh Interrupt management ***************************************/
+ if(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_ER) != RESET)
+ {
+ if(__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_ER) != RESET)
+ {
+ /* Clear the End of Refresh Interrupt Flag */
+ __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_ER);
+
+ /* End of Refresh Callback */
+ HAL_DSI_EndOfRefreshCallback(hdsi);
+ }
+ }
+
+ /* Error Interrupts management ***********************************************/
+ if(hdsi->ErrorMsk != 0U)
+ {
+ ErrorStatus0 = hdsi->Instance->ISR[0U];
+ ErrorStatus0 &= hdsi->Instance->IER[0U];
+ ErrorStatus1 = hdsi->Instance->ISR[1U];
+ ErrorStatus1 &= hdsi->Instance->IER[1U];
+
+ if((ErrorStatus0 & DSI_ERROR_ACK_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_ACK;
+ }
+
+ if((ErrorStatus0 & DSI_ERROR_PHY_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_PHY;
+ }
+
+ if((ErrorStatus1 & DSI_ERROR_TX_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_TX;
+ }
+
+ if((ErrorStatus1 & DSI_ERROR_RX_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_RX;
+ }
+
+ if((ErrorStatus1 & DSI_ERROR_ECC_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_ECC;
+ }
+
+ if((ErrorStatus1 & DSI_ERROR_CRC_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_CRC;
+ }
+
+ if((ErrorStatus1 & DSI_ERROR_PSE_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_PSE;
+ }
+
+ if((ErrorStatus1 & DSI_ERROR_EOT_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_EOT;
+ }
+
+ if((ErrorStatus1 & DSI_ERROR_OVF_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_OVF;
+ }
+
+ if((ErrorStatus1 & DSI_ERROR_GEN_MASK) != RESET)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_GEN;
+ }
+
+ /* Check only selected errors */
+ if(hdsi->ErrorCode != HAL_DSI_ERROR_NONE)
+ {
+ /* DSI error interrupt user callback */
+ HAL_DSI_ErrorCallback(hdsi);
+ }
+ }
+}
+
+/**
+ * @brief Tearing Effect DSI callback.
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_TearingEffectCallback(DSI_HandleTypeDef *hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_TearingEffectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief End of Refresh DSI callback.
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_EndOfRefreshCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Operation Error DSI callback.
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_ErrorCallback(DSI_HandleTypeDef *hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+)
+ (+)
+ (+)
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the Generic interface read-back Virtual Channel ID.
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param VirtualChannelID: Virtual channel ID
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetGenericVCID(DSI_HandleTypeDef *hdsi, uint32_t VirtualChannelID)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Update the GVCID register */
+ hdsi->Instance->GVCIDR &= ~DSI_GVCIDR_VCID;
+ hdsi->Instance->GVCIDR |= VirtualChannelID;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Select video mode and configure the corresponding parameters
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param VidCfg: pointer to a DSI_VidCfgTypeDef structure that contains
+ * the DSI video mode configuration parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigVideoMode(DSI_HandleTypeDef *hdsi, DSI_VidCfgTypeDef *VidCfg)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_COLOR_CODING(VidCfg->ColorCoding));
+ assert_param(IS_DSI_VIDEO_MODE_TYPE(VidCfg->Mode));
+ assert_param(IS_DSI_LP_COMMAND(VidCfg->LPCommandEnable));
+ assert_param(IS_DSI_LP_HFP(VidCfg->LPHorizontalFrontPorchEnable));
+ assert_param(IS_DSI_LP_HBP(VidCfg->LPHorizontalBackPorchEnable));
+ assert_param(IS_DSI_LP_VACTIVE(VidCfg->LPVerticalActiveEnable));
+ assert_param(IS_DSI_LP_VFP(VidCfg->LPVerticalFrontPorchEnable));
+ assert_param(IS_DSI_LP_VBP(VidCfg->LPVerticalBackPorchEnable));
+ assert_param(IS_DSI_LP_VSYNC(VidCfg->LPVerticalSyncActiveEnable));
+ assert_param(IS_DSI_FBTAA(VidCfg->FrameBTAAcknowledgeEnable));
+ assert_param(IS_DSI_DE_POLARITY(VidCfg->DEPolarity));
+ assert_param(IS_DSI_VSYNC_POLARITY(VidCfg->VSPolarity));
+ assert_param(IS_DSI_HSYNC_POLARITY(VidCfg->HSPolarity));
+ /* Check the LooselyPacked variant only in 18-bit mode */
+ if(VidCfg->ColorCoding == DSI_RGB666)
+ {
+ assert_param(IS_DSI_LOOSELY_PACKED(VidCfg->LooselyPacked));
+ }
+
+ /* Select video mode by resetting CMDM and DSIM bits */
+ hdsi->Instance->MCR &= ~DSI_MCR_CMDM;
+ hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM;
+
+ /* Configure the video mode transmission type */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_VMT;
+ hdsi->Instance->VMCR |= VidCfg->Mode;
+
+ /* Configure the video packet size */
+ hdsi->Instance->VPCR &= ~DSI_VPCR_VPSIZE;
+ hdsi->Instance->VPCR |= VidCfg->PacketSize;
+
+ /* Set the chunks number to be transmitted through the DSI link */
+ hdsi->Instance->VCCR &= ~DSI_VCCR_NUMC;
+ hdsi->Instance->VCCR |= VidCfg->NumberOfChunks;
+
+ /* Set the size of the null packet */
+ hdsi->Instance->VNPCR &= ~DSI_VNPCR_NPSIZE;
+ hdsi->Instance->VNPCR |= VidCfg->NullPacketSize;
+
+ /* Select the virtual channel for the LTDC interface traffic */
+ hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID;
+ hdsi->Instance->LVCIDR |= VidCfg->VirtualChannelID;
+
+ /* Configure the polarity of control signals */
+ hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP);
+ hdsi->Instance->LPCR |= (VidCfg->DEPolarity | VidCfg->VSPolarity | VidCfg->HSPolarity);
+
+ /* Select the color coding for the host */
+ hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC;
+ hdsi->Instance->LCOLCR |= VidCfg->ColorCoding;
+
+ /* Select the color coding for the wrapper */
+ hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX;
+ hdsi->Instance->WCFGR |= ((VidCfg->ColorCoding)<<1U);
+
+ /* Enable/disable the loosely packed variant to 18-bit configuration */
+ if(VidCfg->ColorCoding == DSI_RGB666)
+ {
+ hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_LPE;
+ hdsi->Instance->LCOLCR |= VidCfg->LooselyPacked;
+ }
+
+ /* Set the Horizontal Synchronization Active (HSA) in lane byte clock cycles */
+ hdsi->Instance->VHSACR &= ~DSI_VHSACR_HSA;
+ hdsi->Instance->VHSACR |= VidCfg->HorizontalSyncActive;
+
+ /* Set the Horizontal Back Porch (HBP) in lane byte clock cycles */
+ hdsi->Instance->VHBPCR &= ~DSI_VHBPCR_HBP;
+ hdsi->Instance->VHBPCR |= VidCfg->HorizontalBackPorch;
+
+ /* Set the total line time (HLINE=HSA+HBP+HACT+HFP) in lane byte clock cycles */
+ hdsi->Instance->VLCR &= ~DSI_VLCR_HLINE;
+ hdsi->Instance->VLCR |= VidCfg->HorizontalLine;
+
+ /* Set the Vertical Synchronization Active (VSA) */
+ hdsi->Instance->VVSACR &= ~DSI_VVSACR_VSA;
+ hdsi->Instance->VVSACR |= VidCfg->VerticalSyncActive;
+
+ /* Set the Vertical Back Porch (VBP)*/
+ hdsi->Instance->VVBPCR &= ~DSI_VVBPCR_VBP;
+ hdsi->Instance->VVBPCR |= VidCfg->VerticalBackPorch;
+
+ /* Set the Vertical Front Porch (VFP)*/
+ hdsi->Instance->VVFPCR &= ~DSI_VVFPCR_VFP;
+ hdsi->Instance->VVFPCR |= VidCfg->VerticalFrontPorch;
+
+ /* Set the Vertical Active period*/
+ hdsi->Instance->VVACR &= ~DSI_VVACR_VA;
+ hdsi->Instance->VVACR |= VidCfg->VerticalActive;
+
+ /* Configure the command transmission mode */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPCE;
+ hdsi->Instance->VMCR |= VidCfg->LPCommandEnable;
+
+ /* Low power largest packet size */
+ hdsi->Instance->LPMCR &= ~DSI_LPMCR_LPSIZE;
+ hdsi->Instance->LPMCR |= ((VidCfg->LPLargestPacketSize)<<16U);
+
+ /* Low power VACT largest packet size */
+ hdsi->Instance->LPMCR &= ~DSI_LPMCR_VLPSIZE;
+ hdsi->Instance->LPMCR |= VidCfg->LPVACTLargestPacketSize;
+
+ /* Enable LP transition in HFP period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPHFPE;
+ hdsi->Instance->VMCR |= VidCfg->LPHorizontalFrontPorchEnable;
+
+ /* Enable LP transition in HBP period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPHBPE;
+ hdsi->Instance->VMCR |= VidCfg->LPHorizontalBackPorchEnable;
+
+ /* Enable LP transition in VACT period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVAE;
+ hdsi->Instance->VMCR |= VidCfg->LPVerticalActiveEnable;
+
+ /* Enable LP transition in VFP period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVFPE;
+ hdsi->Instance->VMCR |= VidCfg->LPVerticalFrontPorchEnable;
+
+ /* Enable LP transition in VBP period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVBPE;
+ hdsi->Instance->VMCR |= VidCfg->LPVerticalBackPorchEnable;
+
+ /* Enable LP transition in vertical sync period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVSAE;
+ hdsi->Instance->VMCR |= VidCfg->LPVerticalSyncActiveEnable;
+
+ /* Enable the request for an acknowledge response at the end of a frame */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_FBTAAE;
+ hdsi->Instance->VMCR |= VidCfg->FrameBTAAcknowledgeEnable;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Select adapted command mode and configure the corresponding parameters
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param CmdCfg: pointer to a DSI_CmdCfgTypeDef structure that contains
+ * the DSI command mode configuration parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigAdaptedCommandMode(DSI_HandleTypeDef *hdsi, DSI_CmdCfgTypeDef *CmdCfg)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_COLOR_CODING(CmdCfg->ColorCoding));
+ assert_param(IS_DSI_TE_SOURCE(CmdCfg->TearingEffectSource));
+ assert_param(IS_DSI_TE_POLARITY(CmdCfg->TearingEffectPolarity));
+ assert_param(IS_DSI_AUTOMATIC_REFRESH(CmdCfg->AutomaticRefresh));
+ assert_param(IS_DSI_VS_POLARITY(CmdCfg->VSyncPol));
+ assert_param(IS_DSI_TE_ACK_REQUEST(CmdCfg->TEAcknowledgeRequest));
+ assert_param(IS_DSI_DE_POLARITY(CmdCfg->DEPolarity));
+ assert_param(IS_DSI_VSYNC_POLARITY(CmdCfg->VSPolarity));
+ assert_param(IS_DSI_HSYNC_POLARITY(CmdCfg->HSPolarity));
+
+ /* Select command mode by setting CMDM and DSIM bits */
+ hdsi->Instance->MCR |= DSI_MCR_CMDM;
+ hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM;
+ hdsi->Instance->WCFGR |= DSI_WCFGR_DSIM;
+
+ /* Select the virtual channel for the LTDC interface traffic */
+ hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID;
+ hdsi->Instance->LVCIDR |= CmdCfg->VirtualChannelID;
+
+ /* Configure the polarity of control signals */
+ hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP);
+ hdsi->Instance->LPCR |= (CmdCfg->DEPolarity | CmdCfg->VSPolarity | CmdCfg->HSPolarity);
+
+ /* Select the color coding for the host */
+ hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC;
+ hdsi->Instance->LCOLCR |= CmdCfg->ColorCoding;
+
+ /* Select the color coding for the wrapper */
+ hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX;
+ hdsi->Instance->WCFGR |= ((CmdCfg->ColorCoding)<<1U);
+
+ /* Configure the maximum allowed size for write memory command */
+ hdsi->Instance->LCCR &= ~DSI_LCCR_CMDSIZE;
+ hdsi->Instance->LCCR |= CmdCfg->CommandSize;
+
+ /* Configure the tearing effect source and polarity and select the refresh mode */
+ hdsi->Instance->WCFGR &= ~(DSI_WCFGR_TESRC | DSI_WCFGR_TEPOL | DSI_WCFGR_AR | DSI_WCFGR_VSPOL);
+ hdsi->Instance->WCFGR |= (CmdCfg->TearingEffectSource | CmdCfg->TearingEffectPolarity | CmdCfg->AutomaticRefresh | CmdCfg->VSyncPol);
+
+ /* Configure the tearing effect acknowledge request */
+ hdsi->Instance->CMCR &= ~DSI_CMCR_TEARE;
+ hdsi->Instance->CMCR |= CmdCfg->TEAcknowledgeRequest;
+
+ /* Enable the Tearing Effect interrupt */
+ __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_TE);
+
+ /* Enable the End of Refresh interrupt */
+ __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_ER);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure command transmission mode: High-speed or Low-power
+ * and enable/disable acknowledge request after packet transmission
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param LPCmd: pointer to a DSI_LPCmdTypeDef structure that contains
+ * the DSI command transmission mode configuration parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigCommand(DSI_HandleTypeDef *hdsi, DSI_LPCmdTypeDef *LPCmd)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ assert_param(IS_DSI_LP_GSW0P(LPCmd->LPGenShortWriteNoP));
+ assert_param(IS_DSI_LP_GSW1P(LPCmd->LPGenShortWriteOneP));
+ assert_param(IS_DSI_LP_GSW2P(LPCmd->LPGenShortWriteTwoP));
+ assert_param(IS_DSI_LP_GSR0P(LPCmd->LPGenShortReadNoP));
+ assert_param(IS_DSI_LP_GSR1P(LPCmd->LPGenShortReadOneP));
+ assert_param(IS_DSI_LP_GSR2P(LPCmd->LPGenShortReadTwoP));
+ assert_param(IS_DSI_LP_GLW(LPCmd->LPGenLongWrite));
+ assert_param(IS_DSI_LP_DSW0P(LPCmd->LPDcsShortWriteNoP));
+ assert_param(IS_DSI_LP_DSW1P(LPCmd->LPDcsShortWriteOneP));
+ assert_param(IS_DSI_LP_DSR0P(LPCmd->LPDcsShortReadNoP));
+ assert_param(IS_DSI_LP_DLW(LPCmd->LPDcsLongWrite));
+ assert_param(IS_DSI_LP_MRDP(LPCmd->LPMaxReadPacket));
+ assert_param(IS_DSI_ACK_REQUEST(LPCmd->AcknowledgeRequest));
+
+ /* Select High-speed or Low-power for command transmission */
+ hdsi->Instance->CMCR &= ~(DSI_CMCR_GSW0TX |\
+ DSI_CMCR_GSW1TX |\
+ DSI_CMCR_GSW2TX |\
+ DSI_CMCR_GSR0TX |\
+ DSI_CMCR_GSR1TX |\
+ DSI_CMCR_GSR2TX |\
+ DSI_CMCR_GLWTX |\
+ DSI_CMCR_DSW0TX |\
+ DSI_CMCR_DSW1TX |\
+ DSI_CMCR_DSR0TX |\
+ DSI_CMCR_DLWTX |\
+ DSI_CMCR_MRDPS);
+ hdsi->Instance->CMCR |= (LPCmd->LPGenShortWriteNoP |\
+ LPCmd->LPGenShortWriteOneP |\
+ LPCmd->LPGenShortWriteTwoP |\
+ LPCmd->LPGenShortReadNoP |\
+ LPCmd->LPGenShortReadOneP |\
+ LPCmd->LPGenShortReadTwoP |\
+ LPCmd->LPGenLongWrite |\
+ LPCmd->LPDcsShortWriteNoP |\
+ LPCmd->LPDcsShortWriteOneP |\
+ LPCmd->LPDcsShortReadNoP |\
+ LPCmd->LPDcsLongWrite |\
+ LPCmd->LPMaxReadPacket);
+
+ /* Configure the acknowledge request after each packet transmission */
+ hdsi->Instance->CMCR &= ~DSI_CMCR_ARE;
+ hdsi->Instance->CMCR |= LPCmd->AcknowledgeRequest;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the flow control parameters
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param FlowControl: flow control feature(s) to be enabled.
+ * This parameter can be any combination of @ref DSI_FlowControl.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigFlowControl(DSI_HandleTypeDef *hdsi, uint32_t FlowControl)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_FLOW_CONTROL(FlowControl));
+
+ /* Set the DSI Host Protocol Configuration Register */
+ hdsi->Instance->PCR &= ~DSI_FLOW_CONTROL_ALL;
+ hdsi->Instance->PCR |= FlowControl;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DSI PHY timer parameters
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param PhyTimers: DSI_PHY_TimerTypeDef structure that contains
+ * the DSI PHY timing parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigPhyTimer(DSI_HandleTypeDef *hdsi, DSI_PHY_TimerTypeDef *PhyTimers)
+{
+ uint32_t maxTime;
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ maxTime = (PhyTimers->ClockLaneLP2HSTime > PhyTimers->ClockLaneHS2LPTime)? PhyTimers->ClockLaneLP2HSTime: PhyTimers->ClockLaneHS2LPTime;
+
+ /* Clock lane timer configuration */
+
+ /* In Automatic Clock Lane control mode, the DSI Host can turn off the clock lane between two
+ High-Speed transmission.
+ To do so, the DSI Host calculates the time required for the clock lane to change from HighSpeed
+ to Low-Power and from Low-Power to High-Speed.
+ This timings are configured by the HS2LP_TIME and LP2HS_TIME in the DSI Host Clock Lane Timer Configuration Register (DSI_CLTCR).
+ But the DSI Host is not calculating LP2HS_TIME + HS2LP_TIME but 2 x HS2LP_TIME.
+
+ Workaround : Configure HS2LP_TIME and LP2HS_TIME with the same value being the max of HS2LP_TIME or LP2HS_TIME.
+ */
+ hdsi->Instance->CLTCR &= ~(DSI_CLTCR_LP2HS_TIME | DSI_CLTCR_HS2LP_TIME);
+ hdsi->Instance->CLTCR |= (maxTime | ((maxTime)<<16U));
+
+ /* Data lane timer configuration */
+ hdsi->Instance->DLTCR &= ~(DSI_DLTCR_MRD_TIME | DSI_DLTCR_LP2HS_TIME | DSI_DLTCR_HS2LP_TIME);
+ hdsi->Instance->DLTCR |= (PhyTimers->DataLaneMaxReadTime | ((PhyTimers->DataLaneLP2HSTime)<<16U) | ((PhyTimers->DataLaneHS2LPTime)<<24U));
+
+ /* Configure the wait period to request HS transmission after a stop state */
+ hdsi->Instance->PCONFR &= ~DSI_PCONFR_SW_TIME;
+ hdsi->Instance->PCONFR |= ((PhyTimers->StopWaitTime)<<8U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DSI HOST timeout parameters
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param HostTimeouts: DSI_HOST_TimeoutTypeDef structure that contains
+ * the DSI host timeout parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigHostTimeouts(DSI_HandleTypeDef *hdsi, DSI_HOST_TimeoutTypeDef *HostTimeouts)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Set the timeout clock division factor */
+ hdsi->Instance->CCR &= ~DSI_CCR_TOCKDIV;
+ hdsi->Instance->CCR = ((HostTimeouts->TimeoutCkdiv)<<8U);
+
+ /* High-speed transmission timeout */
+ hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_HSTX_TOCNT;
+ hdsi->Instance->TCCR[0U] |= ((HostTimeouts->HighSpeedTransmissionTimeout)<<16U);
+
+ /* Low-power reception timeout */
+ hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_LPRX_TOCNT;
+ hdsi->Instance->TCCR[0U] |= HostTimeouts->LowPowerReceptionTimeout;
+
+ /* High-speed read timeout */
+ hdsi->Instance->TCCR[1U] &= ~DSI_TCCR1_HSRD_TOCNT;
+ hdsi->Instance->TCCR[1U] |= HostTimeouts->HighSpeedReadTimeout;
+
+ /* Low-power read timeout */
+ hdsi->Instance->TCCR[2U] &= ~DSI_TCCR2_LPRD_TOCNT;
+ hdsi->Instance->TCCR[2U] |= HostTimeouts->LowPowerReadTimeout;
+
+ /* High-speed write timeout */
+ hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_HSWR_TOCNT;
+ hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWriteTimeout;
+
+ /* High-speed write presp mode */
+ hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_PM;
+ hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWritePrespMode;
+
+ /* Low-speed write timeout */
+ hdsi->Instance->TCCR[4U] &= ~DSI_TCCR4_LPWR_TOCNT;
+ hdsi->Instance->TCCR[4U] |= HostTimeouts->LowPowerWriteTimeout;
+
+ /* BTA timeout */
+ hdsi->Instance->TCCR[5U] &= ~DSI_TCCR5_BTA_TOCNT;
+ hdsi->Instance->TCCR[5U] |= HostTimeouts->BTATimeout;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start the DSI module
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Start(DSI_HandleTypeDef *hdsi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Enable the DSI host */
+ __HAL_DSI_ENABLE(hdsi);
+
+ /* Enable the DSI wrapper */
+ __HAL_DSI_WRAPPER_ENABLE(hdsi);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DSI module
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Stop(DSI_HandleTypeDef *hdsi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Disable the DSI host */
+ __HAL_DSI_DISABLE(hdsi);
+
+ /* Disable the DSI wrapper */
+ __HAL_DSI_WRAPPER_DISABLE(hdsi);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Refresh the display in command mode
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Refresh(DSI_HandleTypeDef *hdsi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Update the display */
+ hdsi->Instance->WCR |= DSI_WCR_LTDCEN;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Controls the display color mode in Video mode
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ColorMode: Color mode (full or 8-colors).
+ * This parameter can be any value of @ref DSI_Color_Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ColorMode(DSI_HandleTypeDef *hdsi, uint32_t ColorMode)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_COLOR_MODE(ColorMode));
+
+ /* Update the display color mode */
+ hdsi->Instance->WCR &= ~DSI_WCR_COLM;
+ hdsi->Instance->WCR |= ColorMode;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Control the display shutdown in Video mode
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Shutdown: Shut-down (Display-ON or Display-OFF).
+ * This parameter can be any value of @ref DSI_ShutDown
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Shutdown(DSI_HandleTypeDef *hdsi, uint32_t Shutdown)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_SHUT_DOWN(Shutdown));
+
+ /* Update the display Shutdown */
+ hdsi->Instance->WCR &= ~DSI_WCR_SHTDN;
+ hdsi->Instance->WCR |= Shutdown;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DCS or Generic short write command
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ChannelID: Virtual channel ID.
+ * @param Mode: DSI short packet data type.
+ * This parameter can be any value of @ref DSI_SHORT_WRITE_PKT_Data_Type.
+ * @param Param1: DSC command or first generic parameter.
+ * This parameter can be any value of @ref DSI_DCS_Command or a
+ * generic command code.
+ * @param Param2: DSC parameter or second generic parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ShortWrite(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelID,
+ uint32_t Mode,
+ uint32_t Param1,
+ uint32_t Param2)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_SHORT_WRITE_PACKET_TYPE(Mode));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for Command FIFO Empty */
+ while((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == 0U)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the packet to send a short DCS command with 0 or 1 parameter */
+ DSI_ConfigPacketHeader(hdsi->Instance,
+ ChannelID,
+ Mode,
+ Param1,
+ Param2);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DCS or Generic long write command
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ChannelID: Virtual channel ID.
+ * @param Mode: DSI long packet data type.
+ * This parameter can be any value of @ref DSI_LONG_WRITE_PKT_Data_Type.
+ * @param NbParams: Number of parameters.
+ * @param Param1: DSC command or first generic parameter.
+ * This parameter can be any value of @ref DSI_DCS_Command or a
+ * generic command code
+ * @param ParametersTable: Pointer to parameter values table.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_LongWrite(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelID,
+ uint32_t Mode,
+ uint32_t NbParams,
+ uint32_t Param1,
+ uint8_t* ParametersTable)
+{
+ uint32_t uicounter = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_LONG_WRITE_PACKET_TYPE(Mode));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for Command FIFO Empty */
+ while((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the DCS code hexadecimal on payload byte 1, and the other parameters on the write FIFO command*/
+ while(uicounter < NbParams)
+ {
+ if(uicounter == 0x00U)
+ {
+ hdsi->Instance->GPDR=(Param1 | \
+ ((uint32_t)(*(ParametersTable + uicounter)) << 8U) | \
+ ((uint32_t)(*(ParametersTable + uicounter+1U))<<16U) | \
+ ((uint32_t)(*(ParametersTable + uicounter+2U))<<24U));
+ uicounter+=3U;
+ }
+ else
+ {
+ hdsi->Instance->GPDR=((uint32_t)(*(ParametersTable + uicounter)) | \
+ ((uint32_t)(*(ParametersTable + uicounter+1U)) << 8U) | \
+ ((uint32_t)(*(ParametersTable + uicounter+2U)) << 16U) | \
+ ((uint32_t)(*(ParametersTable + uicounter+3U)) << 24U));
+ uicounter+=4U;
+ }
+ }
+
+ /* Configure the packet to send a long DCS command */
+ DSI_ConfigPacketHeader(hdsi->Instance,
+ ChannelID,
+ Mode,
+ ((NbParams+1U)&0x00FFU),
+ (((NbParams+1U)&0xFF00U)>>8U));
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read command (DCS or generic)
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ChannelNbr: Virtual channel ID
+ * @param Array: pointer to a buffer to store the payload of a read back operation.
+ * @param Size: Data size to be read (in byte).
+ * @param Mode: DSI read packet data type.
+ * This parameter can be any value of @ref DSI_SHORT_READ_PKT_Data_Type.
+ * @param DCSCmd: DCS get/read command.
+ * @param ParametersTable: Pointer to parameter values table.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Read(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelNbr,
+ uint8_t* Array,
+ uint32_t Size,
+ uint32_t Mode,
+ uint32_t DCSCmd,
+ uint8_t* ParametersTable)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_READ_PACKET_TYPE(Mode));
+
+ if(Size > 2U)
+ {
+ /* set max return packet size */
+ HAL_DSI_ShortWrite(hdsi, ChannelNbr, DSI_MAX_RETURN_PKT_SIZE, ((Size)&0xFFU), (((Size)>>8U)&0xFFU));
+ }
+
+ /* Configure the packet to read command */
+ if (Mode == DSI_DCS_SHORT_PKT_READ)
+ {
+ DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, DCSCmd, 0U);
+ }
+ else if (Mode == DSI_GEN_SHORT_PKT_READ_P0)
+ {
+ DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, 0U, 0U);
+ }
+ else if (Mode == DSI_GEN_SHORT_PKT_READ_P1)
+ {
+ DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], 0U);
+ }
+ else if (Mode == DSI_GEN_SHORT_PKT_READ_P2)
+ {
+ DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], ParametersTable[1U]);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check that the payload read FIFO is not empty */
+ while((hdsi->Instance->GPSR & DSI_GPSR_PRDFE) == DSI_GPSR_PRDFE)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get the first byte */
+ *((uint32_t *)Array) = (hdsi->Instance->GPDR);
+ if (Size > 4U)
+ {
+ Size -= 4U;
+ Array += 4U;
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Get the remaining bytes if any */
+ while(((int)(Size)) > 0U)
+ {
+ if((hdsi->Instance->GPSR & DSI_GPSR_PRDFE) == 0U)
+ {
+ *((uint32_t *)Array) = (hdsi->Instance->GPDR);
+ Size -= 4U;
+ Array += 4U;
+ }
+
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL running
+ * (only data lanes are in ULPM)
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_EnterULPMData(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* ULPS Request on Data Lanes */
+ hdsi->Instance->PUCR |= DSI_PUCR_URDL;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the D-PHY active lanes enter into ULPM */
+ if((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE)
+ {
+ while((hdsi->Instance->PSR & DSI_PSR_UAN0) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES)
+ {
+ while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL running
+ * (only data lanes are in ULPM)
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ExitULPMData(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Exit ULPS on Data Lanes */
+ hdsi->Instance->PUCR |= DSI_PUCR_UEDL;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until all active lanes exit ULPM */
+ if((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE)
+ {
+ while((hdsi->Instance->PSR & DSI_PSR_UAN0) != DSI_PSR_UAN0)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES)
+ {
+ while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* De-assert the ULPM requests and the ULPM exit bits */
+ hdsi->Instance->PUCR = 0U;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off
+ * (both data and clock lanes are in ULPM)
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_EnterULPM(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Clock lane configuration: no more HS request */
+ hdsi->Instance->CLCR &= ~DSI_CLCR_DPCC;
+
+ /* Use system PLL as byte lane clock source before stopping DSIPHY clock source */
+ __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_PLLR);
+
+ /* ULPS Request on Clock and Data Lanes */
+ hdsi->Instance->PUCR |= (DSI_PUCR_URCL | DSI_PUCR_URDL);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until all active lanes exit ULPM */
+ if((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE)
+ {
+ while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES)
+ {
+ while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Turn off the DSI PLL */
+ __HAL_DSI_PLL_DISABLE(hdsi);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off
+ * (both data and clock lanes are in ULPM)
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ExitULPM(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Turn on the DSI PLL */
+ __HAL_DSI_PLL_ENABLE(hdsi);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for the lock of the PLL */
+ while(__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Exit ULPS on Clock and Data Lanes */
+ hdsi->Instance->PUCR |= (DSI_PUCR_UECL | DSI_PUCR_UEDL);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until all active lanes exit ULPM */
+ if((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE)
+ {
+ while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UANC))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES)
+ {
+ while((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* De-assert the ULPM requests and the ULPM exit bits */
+ hdsi->Instance->PUCR = 0U;
+
+ /* Switch the lanbyteclock source in the RCC from system PLL to D-PHY */
+ __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_DSIPHY);
+
+ /* Restore clock lane configuration to HS */
+ hdsi->Instance->CLCR |= DSI_CLCR_DPCC;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start test pattern generation
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Mode: Pattern generator mode
+ * This parameter can be one of the following values:
+ * 0 : Color bars (horizontal or vertical)
+ * 1 : BER pattern (vertical only)
+ * @param Orientation: Pattern generator orientation
+ * This parameter can be one of the following values:
+ * 0 : Vertical color bars
+ * 1 : Horizontal color bars
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_PatternGeneratorStart(DSI_HandleTypeDef *hdsi, uint32_t Mode, uint32_t Orientation)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Configure pattern generator mode and orientation */
+ hdsi->Instance->VMCR &= ~(DSI_VMCR_PGM | DSI_VMCR_PGO);
+ hdsi->Instance->VMCR |= ((Mode<<20U) | (Orientation<<24U));
+
+ /* Enable pattern generator by setting PGE bit */
+ hdsi->Instance->VMCR |= DSI_VMCR_PGE;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop test pattern generation
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_PatternGeneratorStop(DSI_HandleTypeDef *hdsi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Disable pattern generator by clearing PGE bit */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_PGE;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set Slew-Rate And Delay Tuning
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param CommDelay: Communication delay to be adjusted.
+ * This parameter can be any value of @ref DSI_Communication_Delay
+ * @param Lane: select between clock or data lanes.
+ * This parameter can be any value of @ref DSI_Lane_Group
+ * @param Value: Custom value of the slew-rate or delay
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetSlewRateAndDelayTuning(DSI_HandleTypeDef *hdsi, uint32_t CommDelay, uint32_t Lane, uint32_t Value)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_DSI_COMMUNICATION_DELAY(CommDelay));
+ assert_param(IS_DSI_LANE_GROUP(Lane));
+
+ switch(CommDelay)
+ {
+ case DSI_SLEW_RATE_HSTX:
+ if(Lane == DSI_CLOCK_LANE)
+ {
+ /* High-Speed Transmission Slew Rate Control on Clock Lane */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCCL;
+ hdsi->Instance->WPCR[1U] |= Value<<16U;
+ }
+ else if(Lane == DSI_DATA_LANES)
+ {
+ /* High-Speed Transmission Slew Rate Control on Data Lanes */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCDL;
+ hdsi->Instance->WPCR[1U] |= Value<<18U;
+ }
+ break;
+ case DSI_SLEW_RATE_LPTX:
+ if(Lane == DSI_CLOCK_LANE)
+ {
+ /* Low-Power transmission Slew Rate Compensation on Clock Lane */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCCL;
+ hdsi->Instance->WPCR[1U] |= Value<<6U;
+ }
+ else if(Lane == DSI_DATA_LANES)
+ {
+ /* Low-Power transmission Slew Rate Compensation on Data Lanes */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCDL;
+ hdsi->Instance->WPCR[1U] |= Value<<8U;
+ }
+ break;
+ case DSI_HS_DELAY:
+ if(Lane == DSI_CLOCK_LANE)
+ {
+ /* High-Speed Transmission Delay on Clock Lane */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDCL;
+ hdsi->Instance->WPCR[1U] |= Value;
+ }
+ else if(Lane == DSI_DATA_LANES)
+ {
+ /* High-Speed Transmission Delay on Data Lanes */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDDL;
+ hdsi->Instance->WPCR[1U] |= Value<<2U;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Low-Power Reception Filter Tuning
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Frequency: cutoff frequency of low-pass filter at the input of LPRX
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetLowPowerRXFilter(DSI_HandleTypeDef *hdsi, uint32_t Frequency)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Low-Power RX low-pass Filtering Tuning */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPRXFT;
+ hdsi->Instance->WPCR[1U] |= Frequency<<25U;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Activate an additional current path on all lanes to meet the SDDTx parameter
+ * defined in the MIPI D-PHY specification
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State: ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetSDD(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Activate/Disactivate additional current path on all lanes */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_SDDC;
+ hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 12U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Custom lane pins configuration
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param CustomLane: Function to be applyed on selected lane.
+ * This parameter can be any value of @ref DSI_CustomLane
+ * @param Lane: select between clock or data lane 0 or data lane 1.
+ * This parameter can be any value of @ref DSI_Lane_Select
+ * @param State: ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetLanePinsConfiguration(DSI_HandleTypeDef *hdsi, uint32_t CustomLane, uint32_t Lane, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_DSI_CUSTOM_LANE(CustomLane));
+ assert_param(IS_DSI_LANE(Lane));
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ switch(CustomLane)
+ {
+ case DSI_SWAP_LANE_PINS:
+ if(Lane == DSI_CLOCK_LANE)
+ {
+ /* Swap pins on clock lane */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWCL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 6U);
+ }
+ else if(Lane == DSI_DATA_LANE0)
+ {
+ /* Swap pins on data lane 0 */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL0;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 7U);
+ }
+ else if(Lane == DSI_DATA_LANE1)
+ {
+ /* Swap pins on data lane 1 */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL1;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 8U);
+ }
+ break;
+ case DSI_INVERT_HS_SIGNAL:
+ if(Lane == DSI_CLOCK_LANE)
+ {
+ /* Invert HS signal on clock lane */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSICL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 9U);
+ }
+ else if(Lane == DSI_DATA_LANE0)
+ {
+ /* Invert HS signal on data lane 0 */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL0;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 10U);
+ }
+ else if(Lane == DSI_DATA_LANE1)
+ {
+ /* Invert HS signal on data lane 1 */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL1;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 11U);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set custom timing for the PHY
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Timing: PHY timing to be adjusted.
+ * This parameter can be any value of @ref DSI_PHY_Timing
+ * @param State: ENABLE or DISABLE
+ * @param Value: Custom value of the timing
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetPHYTimings(DSI_HandleTypeDef *hdsi, uint32_t Timing, FunctionalState State, uint32_t Value)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_DSI_PHY_TIMING(Timing));
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ switch(Timing)
+ {
+ case DSI_TCLK_POST:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPOSTEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 27U);
+
+ if(State)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[4U] &= ~DSI_WPCR4_TCLKPOST;
+ hdsi->Instance->WPCR[4U] |= Value & DSI_WPCR4_TCLKPOST;
+ }
+
+ break;
+ case DSI_TLPX_CLK:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXCEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 26U);
+
+ if(State)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXC;
+ hdsi->Instance->WPCR[3U] |= (Value << 24U) & DSI_WPCR3_TLPXC;
+ }
+
+ break;
+ case DSI_THS_EXIT:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSEXITEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 25U);
+
+ if(State)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSEXIT;
+ hdsi->Instance->WPCR[3U] |= (Value << 16U) & DSI_WPCR3_THSEXIT;
+ }
+
+ break;
+ case DSI_TLPX_DATA:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXDEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 24U);
+
+ if(State)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXD;
+ hdsi->Instance->WPCR[3U] |= (Value << 8U) & DSI_WPCR3_TLPXD;
+ }
+
+ break;
+ case DSI_THS_ZERO:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSZEROEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 23U);
+
+ if(State)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSZERO;
+ hdsi->Instance->WPCR[3U] |= Value & DSI_WPCR3_THSZERO;
+ }
+
+ break;
+ case DSI_THS_TRAIL:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSTRAILEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 22U);
+
+ if(State)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSTRAIL;
+ hdsi->Instance->WPCR[2U] |= (Value << 24U) & DSI_WPCR2_THSTRAIL;
+ }
+
+ break;
+ case DSI_THS_PREPARE:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSPREPEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 21U);
+
+ if(State)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSPREP;
+ hdsi->Instance->WPCR[2U] |= (Value << 16U) & DSI_WPCR2_THSPREP;
+ }
+
+ break;
+ case DSI_TCLK_ZERO:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKZEROEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 20U);
+
+ if(State)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKZERO;
+ hdsi->Instance->WPCR[2U] |= (Value << 8U) & DSI_WPCR2_TCLKZERO;
+ }
+
+ break;
+ case DSI_TCLK_PREPARE:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPREPEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 19U);
+
+ if(State)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKPREP;
+ hdsi->Instance->WPCR[2U] |= Value & DSI_WPCR2_TCLKPREP;
+ }
+
+ break;
+ default:
+ break;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Force the Clock/Data Lane in TX Stop Mode
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Lane: select between clock or data lanes.
+ * This parameter can be any value of @ref DSI_Lane_Group
+ * @param State: ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ForceTXStopMode(DSI_HandleTypeDef *hdsi, uint32_t Lane, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_DSI_LANE_GROUP(Lane));
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ if(Lane == DSI_CLOCK_LANE)
+ {
+ /* Force/Unforce the Clock Lane in TX Stop Mode */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMCL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 12U);
+ }
+ else if(Lane == DSI_DATA_LANES)
+ {
+ /* Force/Unforce the Data Lanes in TX Stop Mode */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMDL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 13U);
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Forces LP Receiver in Low-Power Mode
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State: ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ForceRXLowPower(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Force/Unforce LP Receiver in Low-Power Mode */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_FLPRXLPM;
+ hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 22U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Force Data Lanes in RX Mode after a BTA
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State: ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ForceDataLanesInRX(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Force Data Lanes in RX Mode */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TDDL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 16U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable a pull-down on the lanes to prevent from floating states when unused
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State: ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetPullDown(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Enable/Disable pull-down on lanes */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_PDEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 18U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Switch off the contention detection on data lanes
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State: ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetContentionDetectionOff(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Contention Detection on Data Lanes OFF */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_CDOFFDL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 14U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Group4 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DSI state.
+ (+) Get error code.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the DSI state
+ * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL state
+ */
+HAL_DSI_StateTypeDef HAL_DSI_GetState(DSI_HandleTypeDef *hdsi)
+{
+ return hdsi->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F469xx || STM32F479xx */
+#endif /* HAL_DSI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1242 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dsi.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of DSI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DSI_H
+#define __STM32F4xx_HAL_DSI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DSI DSI
+ * @brief DSI HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief DSI Init Structure definition
+ */
+typedef struct
+{
+ uint32_t AutomaticClockLaneControl; /*!< Automatic clock lane control
+ This parameter can be any value of @ref DSI_Automatic_Clk_Lane_Control */
+
+ uint32_t TXEscapeCkdiv; /*!< TX Escape clock division
+ The values 0 and 1 stop the TX_ESC clock generation */
+
+ uint32_t NumberOfLanes; /*!< Number of lanes
+ This parameter can be any value of @ref DSI_Number_Of_Lanes */
+
+}DSI_InitTypeDef;
+
+/**
+ * @brief DSI PLL Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLNDIV; /*!< PLL Loop Division Factor
+ This parameter must be a value between 10 and 125 */
+
+ uint32_t PLLIDF; /*!< PLL Input Division Factor
+ This parameter can be any value of @ref DSI_PLL_IDF */
+
+ uint32_t PLLODF; /*!< PLL Output Division Factor
+ This parameter can be any value of @ref DSI_PLL_ODF */
+
+}DSI_PLLInitTypeDef;
+
+/**
+ * @brief DSI Video mode configuration
+ */
+typedef struct
+{
+ uint32_t VirtualChannelID; /*!< Virtual channel ID */
+
+ uint32_t ColorCoding; /*!< Color coding for LTDC interface
+ This parameter can be any value of @ref DSI_Color_Coding */
+
+ uint32_t LooselyPacked; /*!< Enable or disable loosely packed stream (needed only when using
+ 18-bit configuration).
+ This parameter can be any value of @ref DSI_LooselyPacked */
+
+ uint32_t Mode; /*!< Video mode type
+ This parameter can be any value of @ref DSI_Video_Mode_Type */
+
+ uint32_t PacketSize; /*!< Video packet size */
+
+ uint32_t NumberOfChunks; /*!< Number of chunks */
+
+ uint32_t NullPacketSize; /*!< Null packet size */
+
+ uint32_t HSPolarity; /*!< HSYNC pin polarity
+ This parameter can be any value of @ref DSI_HSYNC_Polarity */
+
+ uint32_t VSPolarity; /*!< VSYNC pin polarity
+ This parameter can be any value of @ref DSI_VSYNC_Active_Polarity */
+
+ uint32_t DEPolarity; /*!< Data Enable pin polarity
+ This parameter can be any value of @ref DSI_DATA_ENABLE_Polarity */
+
+ uint32_t HorizontalSyncActive; /*!< Horizontal synchronism active duration (in lane byte clock cycles) */
+
+ uint32_t HorizontalBackPorch; /*!< Horizontal back-porch duration (in lane byte clock cycles) */
+
+ uint32_t HorizontalLine; /*!< Horizontal line duration (in lane byte clock cycles) */
+
+ uint32_t VerticalSyncActive; /*!< Vertical synchronism active duration */
+
+ uint32_t VerticalBackPorch; /*!< Vertical back-porch duration */
+
+ uint32_t VerticalFrontPorch; /*!< Vertical front-porch duration */
+
+ uint32_t VerticalActive; /*!< Vertical active duration */
+
+ uint32_t LPCommandEnable; /*!< Low-power command enable
+ This parameter can be any value of @ref DSI_LP_Command */
+
+ uint32_t LPLargestPacketSize; /*!< The size, in bytes, of the low power largest packet that
+ can fit in a line during VSA, VBP and VFP regions */
+
+ uint32_t LPVACTLargestPacketSize; /*!< The size, in bytes, of the low power largest packet that
+ can fit in a line during VACT region */
+
+ uint32_t LPHorizontalFrontPorchEnable; /*!< Low-power horizontal front-porch enable
+ This parameter can be any value of @ref DSI_LP_HFP */
+
+ uint32_t LPHorizontalBackPorchEnable; /*!< Low-power horizontal back-porch enable
+ This parameter can be any value of @ref DSI_LP_HBP */
+
+ uint32_t LPVerticalActiveEnable; /*!< Low-power vertical active enable
+ This parameter can be any value of @ref DSI_LP_VACT */
+
+ uint32_t LPVerticalFrontPorchEnable; /*!< Low-power vertical front-porch enable
+ This parameter can be any value of @ref DSI_LP_VFP */
+
+ uint32_t LPVerticalBackPorchEnable; /*!< Low-power vertical back-porch enable
+ This parameter can be any value of @ref DSI_LP_VBP */
+
+ uint32_t LPVerticalSyncActiveEnable; /*!< Low-power vertical sync active enable
+ This parameter can be any value of @ref DSI_LP_VSYNC */
+
+ uint32_t FrameBTAAcknowledgeEnable; /*!< Frame bus-turn-around acknowledge enable
+ This parameter can be any value of @ref DSI_FBTA_acknowledge */
+
+}DSI_VidCfgTypeDef;
+
+/**
+ * @brief DSI Adapted command mode configuration
+ */
+typedef struct
+{
+ uint32_t VirtualChannelID; /*!< Virtual channel ID */
+
+ uint32_t ColorCoding; /*!< Color coding for LTDC interface
+ This parameter can be any value of @ref DSI_Color_Coding */
+
+ uint32_t CommandSize; /*!< Maximum allowed size for an LTDC write memory command, measured in
+ pixels. This parameter can be any value between 0x00 and 0xFFFFU */
+
+ uint32_t TearingEffectSource; /*!< Tearing effect source
+ This parameter can be any value of @ref DSI_TearingEffectSource */
+
+ uint32_t TearingEffectPolarity; /*!< Tearing effect pin polarity
+ This parameter can be any value of @ref DSI_TearingEffectPolarity */
+
+ uint32_t HSPolarity; /*!< HSYNC pin polarity
+ This parameter can be any value of @ref DSI_HSYNC_Polarity */
+
+ uint32_t VSPolarity; /*!< VSYNC pin polarity
+ This parameter can be any value of @ref DSI_VSYNC_Active_Polarity */
+
+ uint32_t DEPolarity; /*!< Data Enable pin polarity
+ This parameter can be any value of @ref DSI_DATA_ENABLE_Polarity */
+
+ uint32_t VSyncPol; /*!< VSync edge on which the LTDC is halted
+ This parameter can be any value of @ref DSI_Vsync_Polarity */
+
+ uint32_t AutomaticRefresh; /*!< Automatic refresh mode
+ This parameter can be any value of @ref DSI_AutomaticRefresh */
+
+ uint32_t TEAcknowledgeRequest; /*!< Tearing Effect Acknowledge Request Enable
+ This parameter can be any value of @ref DSI_TE_AcknowledgeRequest */
+
+}DSI_CmdCfgTypeDef;
+
+/**
+ * @brief DSI command transmission mode configuration
+ */
+typedef struct
+{
+ uint32_t LPGenShortWriteNoP; /*!< Generic Short Write Zero parameters Transmission
+ This parameter can be any value of @ref DSI_LP_LPGenShortWriteNoP */
+
+ uint32_t LPGenShortWriteOneP; /*!< Generic Short Write One parameter Transmission
+ This parameter can be any value of @ref DSI_LP_LPGenShortWriteOneP */
+
+ uint32_t LPGenShortWriteTwoP; /*!< Generic Short Write Two parameters Transmission
+ This parameter can be any value of @ref DSI_LP_LPGenShortWriteTwoP */
+
+ uint32_t LPGenShortReadNoP; /*!< Generic Short Read Zero parameters Transmission
+ This parameter can be any value of @ref DSI_LP_LPGenShortReadNoP */
+
+ uint32_t LPGenShortReadOneP; /*!< Generic Short Read One parameter Transmission
+ This parameter can be any value of @ref DSI_LP_LPGenShortReadOneP */
+
+ uint32_t LPGenShortReadTwoP; /*!< Generic Short Read Two parameters Transmission
+ This parameter can be any value of @ref DSI_LP_LPGenShortReadTwoP */
+
+ uint32_t LPGenLongWrite; /*!< Generic Long Write Transmission
+ This parameter can be any value of @ref DSI_LP_LPGenLongWrite */
+
+ uint32_t LPDcsShortWriteNoP; /*!< DCS Short Write Zero parameters Transmission
+ This parameter can be any value of @ref DSI_LP_LPDcsShortWriteNoP */
+
+ uint32_t LPDcsShortWriteOneP; /*!< DCS Short Write One parameter Transmission
+ This parameter can be any value of @ref DSI_LP_LPDcsShortWriteOneP */
+
+ uint32_t LPDcsShortReadNoP; /*!< DCS Short Read Zero parameters Transmission
+ This parameter can be any value of @ref DSI_LP_LPDcsShortReadNoP */
+
+ uint32_t LPDcsLongWrite; /*!< DCS Long Write Transmission
+ This parameter can be any value of @ref DSI_LP_LPDcsLongWrite */
+
+ uint32_t LPMaxReadPacket; /*!< Maximum Read Packet Size Transmission
+ This parameter can be any value of @ref DSI_LP_LPMaxReadPacket */
+
+ uint32_t AcknowledgeRequest; /*!< Acknowledge Request Enable
+ This parameter can be any value of @ref DSI_AcknowledgeRequest */
+
+}DSI_LPCmdTypeDef;
+
+/**
+ * @brief DSI PHY Timings definition
+ */
+typedef struct
+{
+ uint32_t ClockLaneHS2LPTime; /*!< The maximum time that the D-PHY clock lane takes to go from high-speed
+ to low-power transmission */
+
+ uint32_t ClockLaneLP2HSTime; /*!< The maximum time that the D-PHY clock lane takes to go from low-power
+ to high-speed transmission */
+
+ uint32_t DataLaneHS2LPTime; /*!< The maximum time that the D-PHY data lanes takes to go from high-speed
+ to low-power transmission */
+
+ uint32_t DataLaneLP2HSTime; /*!< The maximum time that the D-PHY data lanes takes to go from low-power
+ to high-speed transmission */
+
+ uint32_t DataLaneMaxReadTime; /*!< The maximum time required to perform a read command */
+
+ uint32_t StopWaitTime; /*!< The minimum wait period to request a High-Speed transmission after the
+ Stop state */
+
+}DSI_PHY_TimerTypeDef;
+
+/**
+ * @brief DSI HOST Timeouts definition
+ */
+typedef struct
+{
+ uint32_t TimeoutCkdiv; /*!< Time-out clock division */
+
+ uint32_t HighSpeedTransmissionTimeout; /*!< High-speed transmission time-out */
+
+ uint32_t LowPowerReceptionTimeout; /*!< Low-power reception time-out */
+
+ uint32_t HighSpeedReadTimeout; /*!< High-speed read time-out */
+
+ uint32_t LowPowerReadTimeout; /*!< Low-power read time-out */
+
+ uint32_t HighSpeedWriteTimeout; /*!< High-speed write time-out */
+
+ uint32_t HighSpeedWritePrespMode; /*!< High-speed write presp mode
+ This parameter can be any value of @ref DSI_HS_PrespMode */
+
+ uint32_t LowPowerWriteTimeout; /*!< Low-speed write time-out */
+
+ uint32_t BTATimeout; /*!< BTA time-out */
+
+}DSI_HOST_TimeoutTypeDef;
+
+/**
+ * @brief DSI States Structure definition
+ */
+typedef enum
+{
+ HAL_DSI_STATE_RESET = 0x00U,
+ HAL_DSI_STATE_READY = 0x01U,
+ HAL_DSI_STATE_ERROR = 0x02U,
+ HAL_DSI_STATE_BUSY = 0x03U,
+ HAL_DSI_STATE_TIMEOUT = 0x04U
+}HAL_DSI_StateTypeDef;
+
+/**
+ * @brief DSI Handle Structure definition
+ */
+typedef struct
+{
+ DSI_TypeDef *Instance; /*!< Register base address */
+ DSI_InitTypeDef Init; /*!< DSI required parameters */
+ HAL_LockTypeDef Lock; /*!< DSI peripheral status */
+ __IO HAL_DSI_StateTypeDef State; /*!< DSI communication state */
+ __IO uint32_t ErrorCode; /*!< DSI Error code */
+ uint32_t ErrorMsk; /*!< DSI Error monitoring mask */
+}DSI_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DSI_DCS_Command DSI DCS Command
+ * @{
+ */
+#define DSI_ENTER_IDLE_MODE 0x39U
+#define DSI_ENTER_INVERT_MODE 0x21U
+#define DSI_ENTER_NORMAL_MODE 0x13U
+#define DSI_ENTER_PARTIAL_MODE 0x12U
+#define DSI_ENTER_SLEEP_MODE 0x10U
+#define DSI_EXIT_IDLE_MODE 0x38U
+#define DSI_EXIT_INVERT_MODE 0x20U
+#define DSI_EXIT_SLEEP_MODE 0x11U
+#define DSI_GET_3D_CONTROL 0x3FU
+#define DSI_GET_ADDRESS_MODE 0x0BU
+#define DSI_GET_BLUE_CHANNEL 0x08U
+#define DSI_GET_DIAGNOSTIC_RESULT 0x0FU
+#define DSI_GET_DISPLAY_MODE 0x0DU
+#define DSI_GET_GREEN_CHANNEL 0x07U
+#define DSI_GET_PIXEL_FORMAT 0x0CU
+#define DSI_GET_POWER_MODE 0x0AU
+#define DSI_GET_RED_CHANNEL 0x06U
+#define DSI_GET_SCANLINE 0x45U
+#define DSI_GET_SIGNAL_MODE 0x0EU
+#define DSI_NOP 0x00U
+#define DSI_READ_DDB_CONTINUE 0xA8U
+#define DSI_READ_DDB_START 0xA1U
+#define DSI_READ_MEMORY_CONTINUE 0x3EU
+#define DSI_READ_MEMORY_START 0x2EU
+#define DSI_SET_3D_CONTROL 0x3DU
+#define DSI_SET_ADDRESS_MODE 0x36U
+#define DSI_SET_COLUMN_ADDRESS 0x2AU
+#define DSI_SET_DISPLAY_OFF 0x28U
+#define DSI_SET_DISPLAY_ON 0x29U
+#define DSI_SET_GAMMA_CURVE 0x26U
+#define DSI_SET_PAGE_ADDRESS 0x2BU
+#define DSI_SET_PARTIAL_COLUMNS 0x31U
+#define DSI_SET_PARTIAL_ROWS 0x30U
+#define DSI_SET_PIXEL_FORMAT 0x3AU
+#define DSI_SET_SCROLL_AREA 0x33U
+#define DSI_SET_SCROLL_START 0x37U
+#define DSI_SET_TEAR_OFF 0x34U
+#define DSI_SET_TEAR_ON 0x35U
+#define DSI_SET_TEAR_SCANLINE 0x44U
+#define DSI_SET_VSYNC_TIMING 0x40U
+#define DSI_SOFT_RESET 0x01U
+#define DSI_WRITE_LUT 0x2DU
+#define DSI_WRITE_MEMORY_CONTINUE 0x3CU
+#define DSI_WRITE_MEMORY_START 0x2CU
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Video_Mode_Type DSI Video Mode Type
+ * @{
+ */
+#define DSI_VID_MODE_NB_PULSES 0U
+#define DSI_VID_MODE_NB_EVENTS 1U
+#define DSI_VID_MODE_BURST 2U
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Color_Mode DSI Color Mode
+ * @{
+ */
+#define DSI_COLOR_MODE_FULL ((uint32_t)0x00000000U)
+#define DSI_COLOR_MODE_EIGHT DSI_WCR_COLM
+/**
+ * @}
+ */
+
+/** @defgroup DSI_ShutDown DSI ShutDown
+ * @{
+ */
+#define DSI_DISPLAY_ON ((uint32_t)0x00000000U)
+#define DSI_DISPLAY_OFF DSI_WCR_SHTDN
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_Command DSI LP Command
+ * @{
+ */
+#define DSI_LP_COMMAND_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_COMMAND_ENABLE DSI_VMCR_LPCE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_HFP DSI LP HFP
+ * @{
+ */
+#define DSI_LP_HFP_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_HFP_ENABLE DSI_VMCR_LPHFPE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_HBP DSI LP HBP
+ * @{
+ */
+#define DSI_LP_HBP_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_HBP_ENABLE DSI_VMCR_LPHBPE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_VACT DSI LP VACT
+ * @{
+ */
+#define DSI_LP_VACT_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_VACT_ENABLE DSI_VMCR_LPVAE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_VFP DSI LP VFP
+ * @{
+ */
+#define DSI_LP_VFP_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_VFP_ENABLE DSI_VMCR_LPVFPE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_VBP DSI LP VBP
+ * @{
+ */
+#define DSI_LP_VBP_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_VBP_ENABLE DSI_VMCR_LPVBPE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_VSYNC DSI LP VSYNC
+ * @{
+ */
+#define DSI_LP_VSYNC_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_VSYNC_ENABLE DSI_VMCR_LPVSAE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_FBTA_acknowledge DSI FBTA Acknowledge
+ * @{
+ */
+#define DSI_FBTAA_DISABLE ((uint32_t)0x00000000U)
+#define DSI_FBTAA_ENABLE DSI_VMCR_FBTAAE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_TearingEffectSource DSI Tearing Effect Source
+ * @{
+ */
+#define DSI_TE_DSILINK ((uint32_t)0x00000000U)
+#define DSI_TE_EXTERNAL DSI_WCFGR_TESRC
+/**
+ * @}
+ */
+
+/** @defgroup DSI_TearingEffectPolarity DSI Tearing Effect Polarity
+ * @{
+ */
+#define DSI_TE_RISING_EDGE ((uint32_t)0x00000000U)
+#define DSI_TE_FALLING_EDGE DSI_WCFGR_TEPOL
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Vsync_Polarity DSI Vsync Polarity
+ * @{
+ */
+#define DSI_VSYNC_FALLING ((uint32_t)0x00000000U)
+#define DSI_VSYNC_RISING DSI_WCFGR_VSPOL
+/**
+ * @}
+ */
+
+/** @defgroup DSI_AutomaticRefresh DSI Automatic Refresh
+ * @{
+ */
+#define DSI_AR_DISABLE ((uint32_t)0x00000000U)
+#define DSI_AR_ENABLE DSI_WCFGR_AR
+/**
+ * @}
+ */
+
+/** @defgroup DSI_TE_AcknowledgeRequest DSI TE Acknowledge Request
+ * @{
+ */
+#define DSI_TE_ACKNOWLEDGE_DISABLE ((uint32_t)0x00000000U)
+#define DSI_TE_ACKNOWLEDGE_ENABLE DSI_CMCR_TEARE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_AcknowledgeRequest DSI Acknowledge Request
+ * @{
+ */
+#define DSI_ACKNOWLEDGE_DISABLE ((uint32_t)0x00000000U)
+#define DSI_ACKNOWLEDGE_ENABLE DSI_CMCR_ARE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPGenShortWriteNoP DSI LP LPGen Short Write NoP
+ * @{
+ */
+#define DSI_LP_GSW0P_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_GSW0P_ENABLE DSI_CMCR_GSW0TX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPGenShortWriteOneP DSI LP LPGen Short Write OneP
+ * @{
+ */
+#define DSI_LP_GSW1P_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_GSW1P_ENABLE DSI_CMCR_GSW1TX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPGenShortWriteTwoP DSI LP LPGen Short Write TwoP
+ * @{
+ */
+#define DSI_LP_GSW2P_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_GSW2P_ENABLE DSI_CMCR_GSW2TX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPGenShortReadNoP DSI LP LPGen Short Read NoP
+ * @{
+ */
+#define DSI_LP_GSR0P_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_GSR0P_ENABLE DSI_CMCR_GSR0TX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPGenShortReadOneP DSI LP LPGen Short Read OneP
+ * @{
+ */
+#define DSI_LP_GSR1P_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_GSR1P_ENABLE DSI_CMCR_GSR1TX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPGenShortReadTwoP DSI LP LPGen Short Read TwoP
+ * @{
+ */
+#define DSI_LP_GSR2P_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_GSR2P_ENABLE DSI_CMCR_GSR2TX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPGenLongWrite DSI LP LPGen LongWrite
+ * @{
+ */
+#define DSI_LP_GLW_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_GLW_ENABLE DSI_CMCR_GLWTX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPDcsShortWriteNoP DSI LP LPDcs Short Write NoP
+ * @{
+ */
+#define DSI_LP_DSW0P_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_DSW0P_ENABLE DSI_CMCR_DSW0TX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPDcsShortWriteOneP DSI LP LPDcs Short Write OneP
+ * @{
+ */
+#define DSI_LP_DSW1P_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_DSW1P_ENABLE DSI_CMCR_DSW1TX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPDcsShortReadNoP DSI LP LPDcs Short Read NoP
+ * @{
+ */
+#define DSI_LP_DSR0P_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_DSR0P_ENABLE DSI_CMCR_DSR0TX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPDcsLongWrite DSI LP LPDcs Long Write
+ * @{
+ */
+#define DSI_LP_DLW_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_DLW_ENABLE DSI_CMCR_DLWTX
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LP_LPMaxReadPacket DSI LP LPMax Read Packet
+ * @{
+ */
+#define DSI_LP_MRDP_DISABLE ((uint32_t)0x00000000U)
+#define DSI_LP_MRDP_ENABLE DSI_CMCR_MRDPS
+/**
+ * @}
+ */
+
+/** @defgroup DSI_HS_PrespMode DSI HS Presp Mode
+ * @{
+ */
+#define DSI_HS_PM_DISABLE ((uint32_t)0x00000000U)
+#define DSI_HS_PM_ENABLE DSI_TCCR3_PM
+/**
+ * @}
+ */
+
+
+/** @defgroup DSI_Automatic_Clk_Lane_Control DSI Automatic Clk Lane Control
+ * @{
+ */
+#define DSI_AUTO_CLK_LANE_CTRL_DISABLE ((uint32_t)0x00000000U)
+#define DSI_AUTO_CLK_LANE_CTRL_ENABLE DSI_CLCR_ACR
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Number_Of_Lanes DSI Number Of Lanes
+ * @{
+ */
+#define DSI_ONE_DATA_LANE 0U
+#define DSI_TWO_DATA_LANES 1U
+/**
+ * @}
+ */
+
+/** @defgroup DSI_FlowControl DSI Flow Control
+ * @{
+ */
+#define DSI_FLOW_CONTROL_CRC_RX DSI_PCR_CRCRXE
+#define DSI_FLOW_CONTROL_ECC_RX DSI_PCR_ECCRXE
+#define DSI_FLOW_CONTROL_BTA DSI_PCR_BTAE
+#define DSI_FLOW_CONTROL_EOTP_RX DSI_PCR_ETRXE
+#define DSI_FLOW_CONTROL_EOTP_TX DSI_PCR_ETTXE
+#define DSI_FLOW_CONTROL_ALL (DSI_FLOW_CONTROL_CRC_RX | DSI_FLOW_CONTROL_ECC_RX | \
+ DSI_FLOW_CONTROL_BTA | DSI_FLOW_CONTROL_EOTP_RX | \
+ DSI_FLOW_CONTROL_EOTP_TX)
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Color_Coding DSI Color Coding
+ * @{
+ */
+#define DSI_RGB565 ((uint32_t)0x00000000U) /*!< The values 0x00000001U and 0x00000002U can also be used for the RGB565 color mode configuration */
+#define DSI_RGB666 ((uint32_t)0x00000003U) /*!< The value 0x00000004U can also be used for the RGB666 color mode configuration */
+#define DSI_RGB888 ((uint32_t)0x00000005U)
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LooselyPacked DSI Loosely Packed
+ * @{
+ */
+#define DSI_LOOSELY_PACKED_ENABLE DSI_LCOLCR_LPE
+#define DSI_LOOSELY_PACKED_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup DSI_HSYNC_Polarity DSI HSYNC Polarity
+ * @{
+ */
+#define DSI_HSYNC_ACTIVE_HIGH ((uint32_t)0x00000000U)
+#define DSI_HSYNC_ACTIVE_LOW DSI_LPCR_HSP
+/**
+ * @}
+ */
+
+/** @defgroup DSI_VSYNC_Active_Polarity DSI VSYNC Active Polarity
+ * @{
+ */
+#define DSI_VSYNC_ACTIVE_HIGH ((uint32_t)0x00000000U)
+#define DSI_VSYNC_ACTIVE_LOW DSI_LPCR_VSP
+/**
+ * @}
+ */
+
+/** @defgroup DSI_DATA_ENABLE_Polarity DSI DATA ENABLE Polarity
+ * @{
+ */
+#define DSI_DATA_ENABLE_ACTIVE_HIGH ((uint32_t)0x00000000U)
+#define DSI_DATA_ENABLE_ACTIVE_LOW DSI_LPCR_DEP
+/**
+ * @}
+ */
+
+/** @defgroup DSI_PLL_IDF DSI PLL IDF
+ * @{
+ */
+#define DSI_PLL_IN_DIV1 ((uint32_t)0x00000001U)
+#define DSI_PLL_IN_DIV2 ((uint32_t)0x00000002U)
+#define DSI_PLL_IN_DIV3 ((uint32_t)0x00000003U)
+#define DSI_PLL_IN_DIV4 ((uint32_t)0x00000004U)
+#define DSI_PLL_IN_DIV5 ((uint32_t)0x00000005U)
+#define DSI_PLL_IN_DIV6 ((uint32_t)0x00000006U)
+#define DSI_PLL_IN_DIV7 ((uint32_t)0x00000007U)
+/**
+ * @}
+ */
+
+/** @defgroup DSI_PLL_ODF DSI PLL ODF
+ * @{
+ */
+#define DSI_PLL_OUT_DIV1 ((uint32_t)0x00000000U)
+#define DSI_PLL_OUT_DIV2 ((uint32_t)0x00000001U)
+#define DSI_PLL_OUT_DIV4 ((uint32_t)0x00000002U)
+#define DSI_PLL_OUT_DIV8 ((uint32_t)0x00000003U)
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Flags DSI Flags
+ * @{
+ */
+#define DSI_FLAG_TE DSI_WISR_TEIF
+#define DSI_FLAG_ER DSI_WISR_ERIF
+#define DSI_FLAG_BUSY DSI_WISR_BUSY
+#define DSI_FLAG_PLLLS DSI_WISR_PLLLS
+#define DSI_FLAG_PLLL DSI_WISR_PLLLIF
+#define DSI_FLAG_PLLU DSI_WISR_PLLUIF
+#define DSI_FLAG_RRS DSI_WISR_RRS
+#define DSI_FLAG_RR DSI_WISR_RRIF
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Interrupts DSI Interrupts
+ * @{
+ */
+#define DSI_IT_TE DSI_WIER_TEIE
+#define DSI_IT_ER DSI_WIER_ERIE
+#define DSI_IT_PLLL DSI_WIER_PLLLIE
+#define DSI_IT_PLLU DSI_WIER_PLLUIE
+#define DSI_IT_RR DSI_WIER_RRIE
+/**
+ * @}
+ */
+
+/** @defgroup DSI_SHORT_WRITE_PKT_Data_Type DSI SHORT WRITE PKT Data Type
+ * @{
+ */
+#define DSI_DCS_SHORT_PKT_WRITE_P0 ((uint32_t)0x00000005U) /*!< DCS short write, no parameters */
+#define DSI_DCS_SHORT_PKT_WRITE_P1 ((uint32_t)0x00000015U) /*!< DCS short write, one parameter */
+#define DSI_GEN_SHORT_PKT_WRITE_P0 ((uint32_t)0x00000003U) /*!< Generic short write, no parameters */
+#define DSI_GEN_SHORT_PKT_WRITE_P1 ((uint32_t)0x00000013U) /*!< Generic short write, one parameter */
+#define DSI_GEN_SHORT_PKT_WRITE_P2 ((uint32_t)0x00000023U) /*!< Generic short write, two parameters */
+/**
+ * @}
+ */
+
+/** @defgroup DSI_LONG_WRITE_PKT_Data_Type DSI LONG WRITE PKT Data Type
+ * @{
+ */
+#define DSI_DCS_LONG_PKT_WRITE ((uint32_t)0x00000039U) /*!< DCS long write */
+#define DSI_GEN_LONG_PKT_WRITE ((uint32_t)0x00000029U) /*!< Generic long write */
+/**
+ * @}
+ */
+
+/** @defgroup DSI_SHORT_READ_PKT_Data_Type DSI SHORT READ PKT Data Type
+ * @{
+ */
+#define DSI_DCS_SHORT_PKT_READ ((uint32_t)0x00000006U) /*!< DCS short read */
+#define DSI_GEN_SHORT_PKT_READ_P0 ((uint32_t)0x00000004U) /*!< Generic short read, no parameters */
+#define DSI_GEN_SHORT_PKT_READ_P1 ((uint32_t)0x00000014U) /*!< Generic short read, one parameter */
+#define DSI_GEN_SHORT_PKT_READ_P2 ((uint32_t)0x00000024U) /*!< Generic short read, two parameters */
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Error_Data_Type DSI Error Data Type
+ * @{
+ */
+#define HAL_DSI_ERROR_NONE 0
+#define HAL_DSI_ERROR_ACK ((uint32_t)0x00000001U) /*!< acknowledge errors */
+#define HAL_DSI_ERROR_PHY ((uint32_t)0x00000002U) /*!< PHY related errors */
+#define HAL_DSI_ERROR_TX ((uint32_t)0x00000004U) /*!< transmission error */
+#define HAL_DSI_ERROR_RX ((uint32_t)0x00000008U) /*!< reception error */
+#define HAL_DSI_ERROR_ECC ((uint32_t)0x00000010U) /*!< ECC errors */
+#define HAL_DSI_ERROR_CRC ((uint32_t)0x00000020U) /*!< CRC error */
+#define HAL_DSI_ERROR_PSE ((uint32_t)0x00000040U) /*!< Packet Size error */
+#define HAL_DSI_ERROR_EOT ((uint32_t)0x00000080U) /*!< End Of Transmission error */
+#define HAL_DSI_ERROR_OVF ((uint32_t)0x00000100U) /*!< FIFO overflow error */
+#define HAL_DSI_ERROR_GEN ((uint32_t)0x00000200U) /*!< Generic FIFO related errors */
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Lane_Group DSI Lane Group
+ * @{
+ */
+#define DSI_CLOCK_LANE ((uint32_t)0x00000000U)
+#define DSI_DATA_LANES ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Communication_Delay DSI Communication Delay
+ * @{
+ */
+#define DSI_SLEW_RATE_HSTX ((uint32_t)0x00000000U)
+#define DSI_SLEW_RATE_LPTX ((uint32_t)0x00000001U)
+#define DSI_HS_DELAY ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup DSI_CustomLane DSI CustomLane
+ * @{
+ */
+#define DSI_SWAP_LANE_PINS ((uint32_t)0x00000000U)
+#define DSI_INVERT_HS_SIGNAL ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Lane_Select DSI Lane Select
+ * @{
+ */
+#define DSI_CLOCK_LANE ((uint32_t)0x00000000U)
+#define DSI_DATA_LANE0 ((uint32_t)0x00000001U)
+#define DSI_DATA_LANE1 ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup DSI_PHY_Timing DSI PHY Timing
+ * @{
+ */
+#define DSI_TCLK_POST ((uint32_t)0x00000000U)
+#define DSI_TLPX_CLK ((uint32_t)0x00000001U)
+#define DSI_THS_EXIT ((uint32_t)0x00000002U)
+#define DSI_TLPX_DATA ((uint32_t)0x00000003U)
+#define DSI_THS_ZERO ((uint32_t)0x00000004U)
+#define DSI_THS_TRAIL ((uint32_t)0x00000005U)
+#define DSI_THS_PREPARE ((uint32_t)0x00000006U)
+#define DSI_TCLK_ZERO ((uint32_t)0x00000007U)
+#define DSI_TCLK_PREPARE ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/**
+ * @brief Enables the DSI host.
+ * @param __HANDLE__: DSI handle
+ * @retval None.
+ */
+#define __HAL_DSI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DSI_CR_EN)
+
+/**
+ * @brief Disables the DSI host.
+ * @param __HANDLE__: DSI handle
+ * @retval None.
+ */
+#define __HAL_DSI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DSI_CR_EN)
+
+/**
+ * @brief Enables the DSI wrapper.
+ * @param __HANDLE__: DSI handle
+ * @retval None.
+ */
+#define __HAL_DSI_WRAPPER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->WCR |= DSI_WCR_DSIEN)
+
+/**
+ * @brief Disable the DSI wrapper.
+ * @param __HANDLE__: DSI handle
+ * @retval None.
+ */
+#define __HAL_DSI_WRAPPER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->WCR &= ~DSI_WCR_DSIEN)
+
+/**
+ * @brief Enables the DSI PLL.
+ * @param __HANDLE__: DSI handle
+ * @retval None.
+ */
+#define __HAL_DSI_PLL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->WRPCR |= DSI_WRPCR_PLLEN)
+
+/**
+ * @brief Disables the DSI PLL.
+ * @param __HANDLE__: DSI handle
+ * @retval None.
+ */
+#define __HAL_DSI_PLL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->WRPCR &= ~DSI_WRPCR_PLLEN)
+
+/**
+ * @brief Enables the DSI regulator.
+ * @param __HANDLE__: DSI handle
+ * @retval None.
+ */
+#define __HAL_DSI_REG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->WRPCR |= DSI_WRPCR_REGEN)
+
+/**
+ * @brief Disables the DSI regulator.
+ * @param __HANDLE__: DSI handle
+ * @retval None.
+ */
+#define __HAL_DSI_REG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->WRPCR &= ~DSI_WRPCR_REGEN)
+
+/**
+ * @brief Get the DSI pending flags.
+ * @param __HANDLE__: DSI handle.
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DSI_FLAG_TE : Tearing Effect Interrupt Flag
+ * @arg DSI_FLAG_ER : End of Refresh Interrupt Flag
+ * @arg DSI_FLAG_BUSY : Busy Flag
+ * @arg DSI_FLAG_PLLLS: PLL Lock Status
+ * @arg DSI_FLAG_PLLL : PLL Lock Interrupt Flag
+ * @arg DSI_FLAG_PLLU : PLL Unlock Interrupt Flag
+ * @arg DSI_FLAG_RRS : Regulator Ready Flag
+ * @arg DSI_FLAG_RR : Regulator Ready Interrupt Flag
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_DSI_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->WISR & (__FLAG__))
+
+/**
+ * @brief Clears the DSI pending flags.
+ * @param __HANDLE__: DSI handle.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DSI_FLAG_TE : Tearing Effect Interrupt Flag
+ * @arg DSI_FLAG_ER : End of Refresh Interrupt Flag
+ * @arg DSI_FLAG_PLLL : PLL Lock Interrupt Flag
+ * @arg DSI_FLAG_PLLU : PLL Unlock Interrupt Flag
+ * @arg DSI_FLAG_RR : Regulator Ready Interrupt Flag
+ * @retval None
+ */
+#define __HAL_DSI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->WIFCR = (__FLAG__))
+
+/**
+ * @brief Enables the specified DSI interrupts.
+ * @param __HANDLE__: DSI handle.
+ * @param __INTERRUPT__: specifies the DSI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DSI_IT_TE : Tearing Effect Interrupt
+ * @arg DSI_IT_ER : End of Refresh Interrupt
+ * @arg DSI_IT_PLLL: PLL Lock Interrupt
+ * @arg DSI_IT_PLLU: PLL Unlock Interrupt
+ * @arg DSI_IT_RR : Regulator Ready Interrupt
+ * @retval None
+ */
+#define __HAL_DSI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->WIER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DSI interrupts.
+ * @param __HANDLE__: DSI handle
+ * @param __INTERRUPT__: specifies the DSI interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DSI_IT_TE : Tearing Effect Interrupt
+ * @arg DSI_IT_ER : End of Refresh Interrupt
+ * @arg DSI_IT_PLLL: PLL Lock Interrupt
+ * @arg DSI_IT_PLLU: PLL Unlock Interrupt
+ * @arg DSI_IT_RR : Regulator Ready Interrupt
+ * @retval None
+ */
+#define __HAL_DSI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->WIER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DSI interrupt has occurred or not.
+ * @param __HANDLE__: DSI handle
+ * @param __INTERRUPT__: specifies the DSI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DSI_IT_TE : Tearing Effect Interrupt
+ * @arg DSI_IT_ER : End of Refresh Interrupt
+ * @arg DSI_IT_PLLL: PLL Lock Interrupt
+ * @arg DSI_IT_PLLU: PLL Unlock Interrupt
+ * @arg DSI_IT_RR : Regulator Ready Interrupt
+ * @retval The state of INTERRUPT (SET or RESET).
+ */
+#define __HAL_DSI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->WISR & (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DSI_Exported_Functions DSI Exported Functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_DSI_Init(DSI_HandleTypeDef *hdsi, DSI_PLLInitTypeDef *PLLInit);
+HAL_StatusTypeDef HAL_DSI_DeInit(DSI_HandleTypeDef *hdsi);
+void HAL_DSI_MspInit(DSI_HandleTypeDef *hdsi);
+void HAL_DSI_MspDeInit(DSI_HandleTypeDef *hdsi);
+
+void HAL_DSI_IRQHandler(DSI_HandleTypeDef *hdsi);
+void HAL_DSI_TearingEffectCallback(DSI_HandleTypeDef *hdsi);
+void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi);
+void HAL_DSI_ErrorCallback(DSI_HandleTypeDef *hdsi);
+
+HAL_StatusTypeDef HAL_DSI_SetGenericVCID(DSI_HandleTypeDef *hdsi, uint32_t VirtualChannelID);
+HAL_StatusTypeDef HAL_DSI_ConfigVideoMode(DSI_HandleTypeDef *hdsi, DSI_VidCfgTypeDef *VidCfg);
+HAL_StatusTypeDef HAL_DSI_ConfigAdaptedCommandMode(DSI_HandleTypeDef *hdsi, DSI_CmdCfgTypeDef *CmdCfg);
+HAL_StatusTypeDef HAL_DSI_ConfigCommand(DSI_HandleTypeDef *hdsi, DSI_LPCmdTypeDef *LPCmd);
+HAL_StatusTypeDef HAL_DSI_ConfigFlowControl(DSI_HandleTypeDef *hdsi, uint32_t FlowControl);
+HAL_StatusTypeDef HAL_DSI_ConfigPhyTimer(DSI_HandleTypeDef *hdsi, DSI_PHY_TimerTypeDef *PhyTimers);
+HAL_StatusTypeDef HAL_DSI_ConfigHostTimeouts(DSI_HandleTypeDef *hdsi, DSI_HOST_TimeoutTypeDef *HostTimeouts);
+HAL_StatusTypeDef HAL_DSI_Start(DSI_HandleTypeDef *hdsi);
+HAL_StatusTypeDef HAL_DSI_Stop(DSI_HandleTypeDef *hdsi);
+HAL_StatusTypeDef HAL_DSI_Refresh(DSI_HandleTypeDef *hdsi);
+HAL_StatusTypeDef HAL_DSI_ColorMode(DSI_HandleTypeDef *hdsi, uint32_t ColorMode);
+HAL_StatusTypeDef HAL_DSI_Shutdown(DSI_HandleTypeDef *hdsi, uint32_t Shutdown);
+HAL_StatusTypeDef HAL_DSI_ShortWrite(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelID,
+ uint32_t Mode,
+ uint32_t Param1,
+ uint32_t Param2);
+HAL_StatusTypeDef HAL_DSI_LongWrite(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelID,
+ uint32_t Mode,
+ uint32_t NbParams,
+ uint32_t Param1,
+ uint8_t* ParametersTable);
+HAL_StatusTypeDef HAL_DSI_Read(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelNbr,
+ uint8_t* Array,
+ uint32_t Size,
+ uint32_t Mode,
+ uint32_t DCSCmd,
+ uint8_t* ParametersTable);
+HAL_StatusTypeDef HAL_DSI_EnterULPMData(DSI_HandleTypeDef *hdsi);
+HAL_StatusTypeDef HAL_DSI_ExitULPMData(DSI_HandleTypeDef *hdsi);
+HAL_StatusTypeDef HAL_DSI_EnterULPM(DSI_HandleTypeDef *hdsi);
+HAL_StatusTypeDef HAL_DSI_ExitULPM(DSI_HandleTypeDef *hdsi);
+
+HAL_StatusTypeDef HAL_DSI_PatternGeneratorStart(DSI_HandleTypeDef *hdsi, uint32_t Mode, uint32_t Orientation);
+HAL_StatusTypeDef HAL_DSI_PatternGeneratorStop(DSI_HandleTypeDef *hdsi);
+
+HAL_StatusTypeDef HAL_DSI_SetSlewRateAndDelayTuning(DSI_HandleTypeDef *hdsi, uint32_t CommDelay, uint32_t Lane, uint32_t Value);
+HAL_StatusTypeDef HAL_DSI_SetLowPowerRXFilter(DSI_HandleTypeDef *hdsi, uint32_t Frequency);
+HAL_StatusTypeDef HAL_DSI_SetSDD(DSI_HandleTypeDef *hdsi, FunctionalState State);
+HAL_StatusTypeDef HAL_DSI_SetLanePinsConfiguration(DSI_HandleTypeDef *hdsi, uint32_t CustomLane, uint32_t Lane, FunctionalState State);
+HAL_StatusTypeDef HAL_DSI_SetPHYTimings(DSI_HandleTypeDef *hdsi, uint32_t Timing, FunctionalState State, uint32_t Value);
+HAL_StatusTypeDef HAL_DSI_ForceTXStopMode(DSI_HandleTypeDef *hdsi, uint32_t Lane, FunctionalState State);
+HAL_StatusTypeDef HAL_DSI_ForceRXLowPower(DSI_HandleTypeDef *hdsi, FunctionalState State);
+HAL_StatusTypeDef HAL_DSI_ForceDataLanesInRX(DSI_HandleTypeDef *hdsi, FunctionalState State);
+HAL_StatusTypeDef HAL_DSI_SetPullDown(DSI_HandleTypeDef *hdsi, FunctionalState State);
+HAL_StatusTypeDef HAL_DSI_SetContentionDetectionOff(DSI_HandleTypeDef *hdsi, FunctionalState State);
+
+uint32_t HAL_DSI_GetError(DSI_HandleTypeDef *hdsi);
+HAL_StatusTypeDef HAL_DSI_ConfigErrorMonitor(DSI_HandleTypeDef *hdsi, uint32_t ActiveErrors);
+HAL_DSI_StateTypeDef HAL_DSI_GetState(DSI_HandleTypeDef *hdsi);
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup DSI_Private_Types DSI Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup DSI_Private_Defines DSI Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DSI_Private_Variables DSI Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DSI_Private_Constants DSI Private Constants
+ * @{
+ */
+#define DSI_MAX_RETURN_PKT_SIZE ((uint32_t)0x00000037U) /*!< Maximum return packet configuration */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DSI_Private_Macros DSI Private Macros
+ * @{
+ */
+#define IS_DSI_PLL_NDIV(NDIV) ((10U <= (NDIV)) && ((NDIV) <= 125U))
+#define IS_DSI_PLL_IDF(IDF) (((IDF) == DSI_PLL_IN_DIV1) || \
+ ((IDF) == DSI_PLL_IN_DIV2) || \
+ ((IDF) == DSI_PLL_IN_DIV3) || \
+ ((IDF) == DSI_PLL_IN_DIV4) || \
+ ((IDF) == DSI_PLL_IN_DIV5) || \
+ ((IDF) == DSI_PLL_IN_DIV6) || \
+ ((IDF) == DSI_PLL_IN_DIV7))
+#define IS_DSI_PLL_ODF(ODF) (((ODF) == DSI_PLL_OUT_DIV1) || \
+ ((ODF) == DSI_PLL_OUT_DIV2) || \
+ ((ODF) == DSI_PLL_OUT_DIV4) || \
+ ((ODF) == DSI_PLL_OUT_DIV8))
+#define IS_DSI_AUTO_CLKLANE_CONTROL(AutoClkLane) (((AutoClkLane) == DSI_AUTO_CLK_LANE_CTRL_DISABLE) || ((AutoClkLane) == DSI_AUTO_CLK_LANE_CTRL_ENABLE))
+#define IS_DSI_NUMBER_OF_LANES(NumberOfLanes) (((NumberOfLanes) == DSI_ONE_DATA_LANE) || ((NumberOfLanes) == DSI_TWO_DATA_LANES))
+#define IS_DSI_FLOW_CONTROL(FlowControl) (((FlowControl) | DSI_FLOW_CONTROL_ALL) == DSI_FLOW_CONTROL_ALL)
+#define IS_DSI_COLOR_CODING(ColorCoding) ((ColorCoding) <= 5U)
+#define IS_DSI_LOOSELY_PACKED(LooselyPacked) (((LooselyPacked) == DSI_LOOSELY_PACKED_ENABLE) || ((LooselyPacked) == DSI_LOOSELY_PACKED_DISABLE))
+#define IS_DSI_DE_POLARITY(DataEnable) (((DataEnable) == DSI_DATA_ENABLE_ACTIVE_HIGH) || ((DataEnable) == DSI_DATA_ENABLE_ACTIVE_LOW))
+#define IS_DSI_VSYNC_POLARITY(VSYNC) (((VSYNC) == DSI_VSYNC_ACTIVE_HIGH) || ((VSYNC) == DSI_VSYNC_ACTIVE_LOW))
+#define IS_DSI_HSYNC_POLARITY(HSYNC) (((HSYNC) == DSI_HSYNC_ACTIVE_HIGH) || ((HSYNC) == DSI_HSYNC_ACTIVE_LOW))
+#define IS_DSI_VIDEO_MODE_TYPE(VideoModeType) (((VideoModeType) == DSI_VID_MODE_NB_PULSES) || \
+ ((VideoModeType) == DSI_VID_MODE_NB_EVENTS) || \
+ ((VideoModeType) == DSI_VID_MODE_BURST))
+#define IS_DSI_COLOR_MODE(ColorMode) (((ColorMode) == DSI_COLOR_MODE_FULL) || ((ColorMode) == DSI_COLOR_MODE_EIGHT))
+#define IS_DSI_SHUT_DOWN(ShutDown) (((ShutDown) == DSI_DISPLAY_ON) || ((ShutDown) == DSI_DISPLAY_OFF))
+#define IS_DSI_LP_COMMAND(LPCommand) (((LPCommand) == DSI_LP_COMMAND_DISABLE) || ((LPCommand) == DSI_LP_COMMAND_ENABLE))
+#define IS_DSI_LP_HFP(LPHFP) (((LPHFP) == DSI_LP_HFP_DISABLE) || ((LPHFP) == DSI_LP_HFP_ENABLE))
+#define IS_DSI_LP_HBP(LPHBP) (((LPHBP) == DSI_LP_HBP_DISABLE) || ((LPHBP) == DSI_LP_HBP_ENABLE))
+#define IS_DSI_LP_VACTIVE(LPVActive) (((LPVActive) == DSI_LP_VACT_DISABLE) || ((LPVActive) == DSI_LP_VACT_ENABLE))
+#define IS_DSI_LP_VFP(LPVFP) (((LPVFP) == DSI_LP_VFP_DISABLE) || ((LPVFP) == DSI_LP_VFP_ENABLE))
+#define IS_DSI_LP_VBP(LPVBP) (((LPVBP) == DSI_LP_VBP_DISABLE) || ((LPVBP) == DSI_LP_VBP_ENABLE))
+#define IS_DSI_LP_VSYNC(LPVSYNC) (((LPVSYNC) == DSI_LP_VSYNC_DISABLE) || ((LPVSYNC) == DSI_LP_VSYNC_ENABLE))
+#define IS_DSI_FBTAA(FrameBTAAcknowledge) (((FrameBTAAcknowledge) == DSI_FBTAA_DISABLE) || ((FrameBTAAcknowledge) == DSI_FBTAA_ENABLE))
+#define IS_DSI_TE_SOURCE(TESource) (((TESource) == DSI_TE_DSILINK) || ((TESource) == DSI_TE_EXTERNAL))
+#define IS_DSI_TE_POLARITY(TEPolarity) (((TEPolarity) == DSI_TE_RISING_EDGE) || ((TEPolarity) == DSI_TE_FALLING_EDGE))
+#define IS_DSI_AUTOMATIC_REFRESH(AutomaticRefresh) (((AutomaticRefresh) == DSI_AR_DISABLE) || ((AutomaticRefresh) == DSI_AR_ENABLE))
+#define IS_DSI_VS_POLARITY(VSPolarity) (((VSPolarity) == DSI_VSYNC_FALLING) || ((VSPolarity) == DSI_VSYNC_RISING))
+#define IS_DSI_TE_ACK_REQUEST(TEAcknowledgeRequest) (((TEAcknowledgeRequest) == DSI_TE_ACKNOWLEDGE_DISABLE) || ((TEAcknowledgeRequest) == DSI_TE_ACKNOWLEDGE_ENABLE))
+#define IS_DSI_ACK_REQUEST(AcknowledgeRequest) (((AcknowledgeRequest) == DSI_ACKNOWLEDGE_DISABLE) || ((AcknowledgeRequest) == DSI_ACKNOWLEDGE_ENABLE))
+#define IS_DSI_LP_GSW0P(LP_GSW0P) (((LP_GSW0P) == DSI_LP_GSW0P_DISABLE) || ((LP_GSW0P) == DSI_LP_GSW0P_ENABLE))
+#define IS_DSI_LP_GSW1P(LP_GSW1P) (((LP_GSW1P) == DSI_LP_GSW1P_DISABLE) || ((LP_GSW1P) == DSI_LP_GSW1P_ENABLE))
+#define IS_DSI_LP_GSW2P(LP_GSW2P) (((LP_GSW2P) == DSI_LP_GSW2P_DISABLE) || ((LP_GSW2P) == DSI_LP_GSW2P_ENABLE))
+#define IS_DSI_LP_GSR0P(LP_GSR0P) (((LP_GSR0P) == DSI_LP_GSR0P_DISABLE) || ((LP_GSR0P) == DSI_LP_GSR0P_ENABLE))
+#define IS_DSI_LP_GSR1P(LP_GSR1P) (((LP_GSR1P) == DSI_LP_GSR1P_DISABLE) || ((LP_GSR1P) == DSI_LP_GSR1P_ENABLE))
+#define IS_DSI_LP_GSR2P(LP_GSR2P) (((LP_GSR2P) == DSI_LP_GSR2P_DISABLE) || ((LP_GSR2P) == DSI_LP_GSR2P_ENABLE))
+#define IS_DSI_LP_GLW(LP_GLW) (((LP_GLW) == DSI_LP_GLW_DISABLE) || ((LP_GLW) == DSI_LP_GLW_ENABLE))
+#define IS_DSI_LP_DSW0P(LP_DSW0P) (((LP_DSW0P) == DSI_LP_DSW0P_DISABLE) || ((LP_DSW0P) == DSI_LP_DSW0P_ENABLE))
+#define IS_DSI_LP_DSW1P(LP_DSW1P) (((LP_DSW1P) == DSI_LP_DSW1P_DISABLE) || ((LP_DSW1P) == DSI_LP_DSW1P_ENABLE))
+#define IS_DSI_LP_DSR0P(LP_DSR0P) (((LP_DSR0P) == DSI_LP_DSR0P_DISABLE) || ((LP_DSR0P) == DSI_LP_DSR0P_ENABLE))
+#define IS_DSI_LP_DLW(LP_DLW) (((LP_DLW) == DSI_LP_DLW_DISABLE) || ((LP_DLW) == DSI_LP_DLW_ENABLE))
+#define IS_DSI_LP_MRDP(LP_MRDP) (((LP_MRDP) == DSI_LP_MRDP_DISABLE) || ((LP_MRDP) == DSI_LP_MRDP_ENABLE))
+#define IS_DSI_SHORT_WRITE_PACKET_TYPE(MODE) (((MODE) == DSI_DCS_SHORT_PKT_WRITE_P0) || \
+ ((MODE) == DSI_DCS_SHORT_PKT_WRITE_P1) || \
+ ((MODE) == DSI_GEN_SHORT_PKT_WRITE_P0) || \
+ ((MODE) == DSI_GEN_SHORT_PKT_WRITE_P1) || \
+ ((MODE) == DSI_GEN_SHORT_PKT_WRITE_P2))
+#define IS_DSI_LONG_WRITE_PACKET_TYPE(MODE) (((MODE) == DSI_DCS_LONG_PKT_WRITE) || \
+ ((MODE) == DSI_GEN_LONG_PKT_WRITE))
+#define IS_DSI_READ_PACKET_TYPE(MODE) (((MODE) == DSI_DCS_SHORT_PKT_READ) || \
+ ((MODE) == DSI_GEN_SHORT_PKT_READ_P0) || \
+ ((MODE) == DSI_GEN_SHORT_PKT_READ_P1) || \
+ ((MODE) == DSI_GEN_SHORT_PKT_READ_P2))
+#define IS_DSI_COMMUNICATION_DELAY(CommDelay) (((CommDelay) == DSI_SLEW_RATE_HSTX) || ((CommDelay) == DSI_SLEW_RATE_LPTX) || ((CommDelay) == DSI_HS_DELAY))
+#define IS_DSI_LANE_GROUP(Lane) (((Lane) == DSI_CLOCK_LANE) || ((Lane) == DSI_DATA_LANES))
+#define IS_DSI_CUSTOM_LANE(CustomLane) (((CustomLane) == DSI_SWAP_LANE_PINS) || ((CustomLane) == DSI_INVERT_HS_SIGNAL))
+#define IS_DSI_LANE(Lane) (((Lane) == DSI_CLOCK_LANE) || ((Lane) == DSI_DATA_LANE0) || ((Lane) == DSI_DATA_LANE1))
+#define IS_DSI_PHY_TIMING(Timing) (((Timing) == DSI_TCLK_POST ) || \
+ ((Timing) == DSI_TLPX_CLK ) || \
+ ((Timing) == DSI_THS_EXIT ) || \
+ ((Timing) == DSI_TLPX_DATA ) || \
+ ((Timing) == DSI_THS_ZERO ) || \
+ ((Timing) == DSI_THS_TRAIL ) || \
+ ((Timing) == DSI_THS_PREPARE ) || \
+ ((Timing) == DSI_TCLK_ZERO ) || \
+ ((Timing) == DSI_TCLK_PREPARE))
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup DSI_Private_Functions_Prototypes DSI Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DSI_Private_Functions DSI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DSI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2061 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_eth.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief ETH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Ethernet (ETH) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#)Declare a ETH_HandleTypeDef handle structure, for example:
+ ETH_HandleTypeDef heth;
+
+ (#)Fill parameters of Init structure in heth handle
+
+ (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...)
+
+ (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API:
+ (##) Enable the Ethernet interface clock using
+ (+++) __HAL_RCC_ETHMAC_CLK_ENABLE();
+ (+++) __HAL_RCC_ETHMACTX_CLK_ENABLE();
+ (+++) __HAL_RCC_ETHMACRX_CLK_ENABLE();
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure Ethernet pin-out
+ (##) Configure Ethernet NVIC interrupt (IT mode)
+
+ (#)Initialize Ethernet DMA Descriptors in chain mode and point to allocated buffers:
+ (##) HAL_ETH_DMATxDescListInit(); for Transmission process
+ (##) HAL_ETH_DMARxDescListInit(); for Reception process
+
+ (#)Enable MAC and DMA transmission and reception:
+ (##) HAL_ETH_Start();
+
+ (#)Prepare ETH DMA TX Descriptors and give the hand to ETH DMA to transfer
+ the frame to MAC TX FIFO:
+ (##) HAL_ETH_TransmitFrame();
+
+ (#)Poll for a received frame in ETH RX DMA Descriptors and get received
+ frame parameters
+ (##) HAL_ETH_GetReceivedFrame(); (should be called into an infinite loop)
+
+ (#) Get a received frame when an ETH RX interrupt occurs:
+ (##) HAL_ETH_GetReceivedFrame_IT(); (called in IT mode only)
+
+ (#) Communicate with external PHY device:
+ (##) Read a specific register from the PHY
+ HAL_ETH_ReadPHYRegister();
+ (##) Write data to a specific RHY register:
+ HAL_ETH_WritePHYRegister();
+
+ (#) Configure the Ethernet MAC after ETH peripheral initialization
+ HAL_ETH_ConfigMAC(); all MAC parameters should be filled.
+
+ (#) Configure the Ethernet DMA after ETH peripheral initialization
+ HAL_ETH_ConfigDMA(); all DMA parameters should be filled.
+
+ -@- The PTP protocol and the DMA descriptors ring mode are not supported
+ in this driver
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup ETH ETH
+ * @brief ETH HAL module driver
+ * @{
+ */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup ETH_Private_Constants ETH Private Constants
+ * @{
+ */
+#define ETH_TIMEOUT_SWRESET ((uint32_t)500U)
+#define ETH_TIMEOUT_LINKED_STATE ((uint32_t)5000U)
+#define ETH_TIMEOUT_AUTONEGO_COMPLETED ((uint32_t)5000U)
+
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup ETH_Private_Functions ETH Private Functions
+ * @{
+ */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err);
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr);
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth);
+static void ETH_Delay(uint32_t mdelay);
+
+/**
+ * @}
+ */
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup ETH_Exported_Functions ETH Exported Functions
+ * @{
+ */
+
+/** @defgroup ETH_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the Ethernet peripheral
+ (+) De-initialize the Ethernet peripheral
+
+ @endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the Ethernet MAC and DMA according to default
+ * parameters.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth)
+{
+ uint32_t tmpreg1 = 0U, phyreg = 0U;
+ uint32_t hclk = 60000000U;
+ uint32_t tickstart = 0U;
+ uint32_t err = ETH_SUCCESS;
+
+ /* Check the ETH peripheral state */
+ if(heth == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check parameters */
+ assert_param(IS_ETH_AUTONEGOTIATION(heth->Init.AutoNegotiation));
+ assert_param(IS_ETH_RX_MODE(heth->Init.RxMode));
+ assert_param(IS_ETH_CHECKSUM_MODE(heth->Init.ChecksumMode));
+ assert_param(IS_ETH_MEDIA_INTERFACE(heth->Init.MediaInterface));
+
+ if(heth->State == HAL_ETH_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ heth->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC. */
+ HAL_ETH_MspInit(heth);
+ }
+
+ /* Enable SYSCFG Clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Select MII or RMII Mode*/
+ SYSCFG->PMC &= ~(SYSCFG_PMC_MII_RMII_SEL);
+ SYSCFG->PMC |= (uint32_t)heth->Init.MediaInterface;
+
+ /* Ethernet Software reset */
+ /* Set the SWR bit: resets all MAC subsystem internal registers and logic */
+ /* After reset all the registers holds their respective reset values */
+ (heth->Instance)->DMABMR |= ETH_DMABMR_SR;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for software reset */
+ while (((heth->Instance)->DMABMR & ETH_DMABMR_SR) != (uint32_t)RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_SWRESET)
+ {
+ heth->State= HAL_ETH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Note: The SWR is not performed if the ETH_RX_CLK or the ETH_TX_CLK are
+ not available, please check your external PHY or the IO configuration */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*-------------------------------- MAC Initialization ----------------------*/
+ /* Get the ETHERNET MACMIIAR value */
+ tmpreg1 = (heth->Instance)->MACMIIAR;
+ /* Clear CSR Clock Range CR[2:0] bits */
+ tmpreg1 &= ETH_MACMIIAR_CR_MASK;
+
+ /* Get hclk frequency value */
+ hclk = HAL_RCC_GetHCLKFreq();
+
+ /* Set CR bits depending on hclk value */
+ if((hclk >= 20000000U)&&(hclk < 35000000U))
+ {
+ /* CSR Clock Range between 20-35 MHz */
+ tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div16;
+ }
+ else if((hclk >= 35000000U)&&(hclk < 60000000U))
+ {
+ /* CSR Clock Range between 35-60 MHz */
+ tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div26;
+ }
+ else if((hclk >= 60000000U)&&(hclk < 100000000U))
+ {
+ /* CSR Clock Range between 60-100 MHz */
+ tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div42;
+ }
+ else if((hclk >= 100000000U)&&(hclk < 150000000U))
+ {
+ /* CSR Clock Range between 100-150 MHz */
+ tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div62;
+ }
+ else /* ((hclk >= 150000000)&&(hclk <= 183000000)) */
+ {
+ /* CSR Clock Range between 150-183 MHz */
+ tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div102;
+ }
+
+ /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */
+ (heth->Instance)->MACMIIAR = (uint32_t)tmpreg1;
+
+ /*-------------------- PHY initialization and configuration ----------------*/
+ /* Put the PHY in reset mode */
+ if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_RESET)) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Delay to assure PHY reset */
+ HAL_Delay(PHY_RESET_DELAY);
+
+ if((heth->Init).AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* We wait for linked status */
+ do
+ {
+ HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_LINKED_STATE)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+ } while (((phyreg & PHY_LINKED_STATUS) != PHY_LINKED_STATUS));
+
+
+ /* Enable Auto-Negotiation */
+ if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_AUTONEGOTIATION)) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the auto-negotiation will be completed */
+ do
+ {
+ HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_AUTONEGO_COMPLETED)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+
+ } while (((phyreg & PHY_AUTONEGO_COMPLETE) != PHY_AUTONEGO_COMPLETE));
+
+ /* Read the result of the auto-negotiation */
+ if((HAL_ETH_ReadPHYRegister(heth, PHY_SR, &phyreg)) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Configure the MAC with the Duplex Mode fixed by the auto-negotiation process */
+ if((phyreg & PHY_DUPLEX_STATUS) != (uint32_t)RESET)
+ {
+ /* Set Ethernet duplex mode to Full-duplex following the auto-negotiation */
+ (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+ }
+ else
+ {
+ /* Set Ethernet duplex mode to Half-duplex following the auto-negotiation */
+ (heth->Init).DuplexMode = ETH_MODE_HALFDUPLEX;
+ }
+ /* Configure the MAC with the speed fixed by the auto-negotiation process */
+ if((phyreg & PHY_SPEED_STATUS) == PHY_SPEED_STATUS)
+ {
+ /* Set Ethernet speed to 10M following the auto-negotiation */
+ (heth->Init).Speed = ETH_SPEED_10M;
+ }
+ else
+ {
+ /* Set Ethernet speed to 100M following the auto-negotiation */
+ (heth->Init).Speed = ETH_SPEED_100M;
+ }
+ }
+ else /* AutoNegotiation Disable */
+ {
+ /* Check parameters */
+ assert_param(IS_ETH_SPEED(heth->Init.Speed));
+ assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+
+ /* Set MAC Speed and Duplex Mode */
+ if(HAL_ETH_WritePHYRegister(heth, PHY_BCR, ((uint16_t)((heth->Init).DuplexMode >> 3U) |
+ (uint16_t)((heth->Init).Speed >> 1U))) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Delay to assure PHY configuration */
+ HAL_Delay(PHY_CONFIG_DELAY);
+ }
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set ETH HAL State to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief De-Initializes the ETH peripheral.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth)
+{
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */
+ HAL_ETH_MspDeInit(heth);
+
+ /* Set ETH HAL state to Disabled */
+ heth->State= HAL_ETH_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DMA Tx descriptors in chain mode.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param DMATxDescTab: Pointer to the first Tx desc list
+ * @param TxBuff: Pointer to the first TxBuffer list
+ * @param TxBuffCount: Number of the used Tx desc in the list
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount)
+{
+ uint32_t i = 0U;
+ ETH_DMADescTypeDef *dmatxdesc;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Set the DMATxDescToSet pointer with the first one of the DMATxDescTab list */
+ heth->TxDesc = DMATxDescTab;
+
+ /* Fill each DMATxDesc descriptor with the right values */
+ for(i=0U; i < TxBuffCount; i++)
+ {
+ /* Get the pointer on the ith member of the Tx Desc list */
+ dmatxdesc = DMATxDescTab + i;
+
+ /* Set Second Address Chained bit */
+ dmatxdesc->Status = ETH_DMATXDESC_TCH;
+
+ /* Set Buffer1 address pointer */
+ dmatxdesc->Buffer1Addr = (uint32_t)(&TxBuff[i*ETH_TX_BUF_SIZE]);
+
+ if ((heth->Init).ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+ {
+ /* Set the DMA Tx descriptors checksum insertion */
+ dmatxdesc->Status |= ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL;
+ }
+
+ /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+ if(i < (TxBuffCount-1U))
+ {
+ /* Set next descriptor address register with next descriptor base address */
+ dmatxdesc->Buffer2NextDescAddr = (uint32_t)(DMATxDescTab+i+1U);
+ }
+ else
+ {
+ /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
+ dmatxdesc->Buffer2NextDescAddr = (uint32_t) DMATxDescTab;
+ }
+ }
+
+ /* Set Transmit Descriptor List Address Register */
+ (heth->Instance)->DMATDLAR = (uint32_t) DMATxDescTab;
+
+ /* Set ETH HAL State to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DMA Rx descriptors in chain mode.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param DMARxDescTab: Pointer to the first Rx desc list
+ * @param RxBuff: Pointer to the first RxBuffer list
+ * @param RxBuffCount: Number of the used Rx desc in the list
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount)
+{
+ uint32_t i = 0U;
+ ETH_DMADescTypeDef *DMARxDesc;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Set the Ethernet RxDesc pointer with the first one of the DMARxDescTab list */
+ heth->RxDesc = DMARxDescTab;
+
+ /* Fill each DMARxDesc descriptor with the right values */
+ for(i=0U; i < RxBuffCount; i++)
+ {
+ /* Get the pointer on the ith member of the Rx Desc list */
+ DMARxDesc = DMARxDescTab+i;
+
+ /* Set Own bit of the Rx descriptor Status */
+ DMARxDesc->Status = ETH_DMARXDESC_OWN;
+
+ /* Set Buffer1 size and Second Address Chained bit */
+ DMARxDesc->ControlBufferSize = ETH_DMARXDESC_RCH | ETH_RX_BUF_SIZE;
+
+ /* Set Buffer1 address pointer */
+ DMARxDesc->Buffer1Addr = (uint32_t)(&RxBuff[i*ETH_RX_BUF_SIZE]);
+
+ if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+ {
+ /* Enable Ethernet DMA Rx Descriptor interrupt */
+ DMARxDesc->ControlBufferSize &= ~ETH_DMARXDESC_DIC;
+ }
+
+ /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+ if(i < (RxBuffCount-1U))
+ {
+ /* Set next descriptor address register with next descriptor base address */
+ DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab+i+1U);
+ }
+ else
+ {
+ /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
+ DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab);
+ }
+ }
+
+ /* Set Receive Descriptor List Address Register */
+ (heth->Instance)->DMARDLAR = (uint32_t) DMARxDescTab;
+
+ /* Set ETH HAL State to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the ETH MSP.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes ETH MSP.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Transmit a frame
+ HAL_ETH_TransmitFrame();
+ (+) Receive a frame
+ HAL_ETH_GetReceivedFrame();
+ HAL_ETH_GetReceivedFrame_IT();
+ (+) Read from an External PHY register
+ HAL_ETH_ReadPHYRegister();
+ (+) Write to an External PHY register
+ HAL_ETH_WritePHYRegister();
+
+ @endverbatim
+
+ * @{
+ */
+
+/**
+ * @brief Sends an Ethernet frame.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param FrameLength: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength)
+{
+ uint32_t bufcount = 0U, size = 0U, i = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ if (FrameLength == 0U)
+ {
+ /* Set ETH HAL state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_ERROR;
+ }
+
+ /* Check if the descriptor is owned by the ETHERNET DMA (when set) or CPU (when reset) */
+ if(((heth->TxDesc)->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
+ {
+ /* OWN bit set */
+ heth->State = HAL_ETH_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_ERROR;
+ }
+
+ /* Get the number of needed Tx buffers for the current frame */
+ if (FrameLength > ETH_TX_BUF_SIZE)
+ {
+ bufcount = FrameLength/ETH_TX_BUF_SIZE;
+ if (FrameLength % ETH_TX_BUF_SIZE)
+ {
+ bufcount++;
+ }
+ }
+ else
+ {
+ bufcount = 1U;
+ }
+ if (bufcount == 1U)
+ {
+ /* Set LAST and FIRST segment */
+ heth->TxDesc->Status |=ETH_DMATXDESC_FS|ETH_DMATXDESC_LS;
+ /* Set frame size */
+ heth->TxDesc->ControlBufferSize = (FrameLength & ETH_DMATXDESC_TBS1);
+ /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+ heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+ /* Point to next descriptor */
+ heth->TxDesc= (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+ }
+ else
+ {
+ for (i=0U; i< bufcount; i++)
+ {
+ /* Clear FIRST and LAST segment bits */
+ heth->TxDesc->Status &= ~(ETH_DMATXDESC_FS | ETH_DMATXDESC_LS);
+
+ if (i == 0U)
+ {
+ /* Setting the first segment bit */
+ heth->TxDesc->Status |= ETH_DMATXDESC_FS;
+ }
+
+ /* Program size */
+ heth->TxDesc->ControlBufferSize = (ETH_TX_BUF_SIZE & ETH_DMATXDESC_TBS1);
+
+ if (i == (bufcount-1U))
+ {
+ /* Setting the last segment bit */
+ heth->TxDesc->Status |= ETH_DMATXDESC_LS;
+ size = FrameLength - (bufcount-1U)*ETH_TX_BUF_SIZE;
+ heth->TxDesc->ControlBufferSize = (size & ETH_DMATXDESC_TBS1);
+ }
+
+ /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+ heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+ /* point to next descriptor */
+ heth->TxDesc = (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+ }
+ }
+
+ /* When Tx Buffer unavailable flag is set: clear it and resume transmission */
+ if (((heth->Instance)->DMASR & ETH_DMASR_TBUS) != (uint32_t)RESET)
+ {
+ /* Clear TBUS ETHERNET DMA flag */
+ (heth->Instance)->DMASR = ETH_DMASR_TBUS;
+ /* Resume DMA transmission*/
+ (heth->Instance)->DMATPDR = 0U;
+ }
+
+ /* Set ETH HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Checks for received frames.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth)
+{
+ uint32_t framelength = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Check the ETH state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Check if segment is not owned by DMA */
+ /* (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) */
+ if(((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET))
+ {
+ /* Check if last segment */
+ if(((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET))
+ {
+ /* increment segment count */
+ (heth->RxFrameInfos).SegCount++;
+
+ /* Check if last segment is first segment: one segment contains the frame */
+ if ((heth->RxFrameInfos).SegCount == 1U)
+ {
+ (heth->RxFrameInfos).FSRxDesc =heth->RxDesc;
+ }
+
+ heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+
+ /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+ framelength = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4U;
+ heth->RxFrameInfos.length = framelength;
+
+ /* Get the address of the buffer start address */
+ heth->RxFrameInfos.buffer = ((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+ /* point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) ((heth->RxDesc)->Buffer2NextDescAddr);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ /* Check if first segment */
+ else if((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET)
+ {
+ (heth->RxFrameInfos).FSRxDesc = heth->RxDesc;
+ (heth->RxFrameInfos).LSRxDesc = NULL;
+ (heth->RxFrameInfos).SegCount = 1U;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+ }
+ /* Check if intermediate segment */
+ else
+ {
+ (heth->RxFrameInfos).SegCount++;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+ }
+ }
+
+ /* Set ETH HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Gets the Received frame in interrupt mode.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth)
+{
+ uint32_t descriptorscancounter = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set ETH HAL State to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Scan descriptors owned by CPU */
+ while (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && (descriptorscancounter < ETH_RXBUFNB))
+ {
+ /* Just for security */
+ descriptorscancounter++;
+
+ /* Check if first segment in frame */
+ /* ((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)) */
+ if((heth->RxDesc->Status & (ETH_DMARXDESC_FS | ETH_DMARXDESC_LS)) == (uint32_t)ETH_DMARXDESC_FS)
+ {
+ heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+ heth->RxFrameInfos.SegCount = 1U;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+ }
+ /* Check if intermediate segment */
+ /* ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)&& ((heth->RxDesc->Status & ETH_DMARXDESC_FS) == (uint32_t)RESET)) */
+ else if ((heth->RxDesc->Status & (ETH_DMARXDESC_LS | ETH_DMARXDESC_FS)) == (uint32_t)RESET)
+ {
+ /* Increment segment count */
+ (heth->RxFrameInfos.SegCount)++;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*)(heth->RxDesc->Buffer2NextDescAddr);
+ }
+ /* Should be last segment */
+ else
+ {
+ /* Last segment */
+ heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+
+ /* Increment segment count */
+ (heth->RxFrameInfos.SegCount)++;
+
+ /* Check if last segment is first segment: one segment contains the frame */
+ if ((heth->RxFrameInfos.SegCount) == 1U)
+ {
+ heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+ }
+
+ /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+ heth->RxFrameInfos.length = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4U;
+
+ /* Get the address of the buffer start address */
+ heth->RxFrameInfos.buffer =((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief This function handles ETH interrupt request.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth)
+{
+ /* Frame received */
+ if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_R))
+ {
+ /* Receive complete callback */
+ HAL_ETH_RxCpltCallback(heth);
+
+ /* Clear the Eth DMA Rx IT pending bits */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_R);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ }
+ /* Frame transmitted */
+ else if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_T))
+ {
+ /* Transfer complete callback */
+ HAL_ETH_TxCpltCallback(heth);
+
+ /* Clear the Eth DMA Tx IT pending bits */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_T);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+ }
+
+ /* Clear the interrupt flags */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_NIS);
+
+ /* ETH DMA Error */
+ if(__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_AIS))
+ {
+ /* Ethernet Error callback */
+ HAL_ETH_ErrorCallback(heth);
+
+ /* Clear the interrupt flags */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_FLAG_AIS);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Ethernet transfer error callbacks
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Reads a PHY register
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param PHYReg: PHY register address, is the index of one of the 32 PHY register.
+ * This parameter can be one of the following values:
+ * PHY_BCR: Transceiver Basic Control Register,
+ * PHY_BSR: Transceiver Basic Status Register.
+ * More PHY register could be read depending on the used PHY
+ * @param RegValue: PHY register value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue)
+{
+ uint32_t tmpreg1 = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Check parameters */
+ assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+
+ /* Check the ETH peripheral state */
+ if(heth->State == HAL_ETH_STATE_BUSY_RD)
+ {
+ return HAL_BUSY;
+ }
+ /* Set ETH HAL State to BUSY_RD */
+ heth->State = HAL_ETH_STATE_BUSY_RD;
+
+ /* Get the ETHERNET MACMIIAR value */
+ tmpreg1 = heth->Instance->MACMIIAR;
+
+ /* Keep only the CSR Clock Range CR[2:0] bits value */
+ tmpreg1 &= ~ETH_MACMIIAR_CR_MASK;
+
+ /* Prepare the MII address register value */
+ tmpreg1 |=(((uint32_t)heth->Init.PhyAddress << 11U) & ETH_MACMIIAR_PA); /* Set the PHY device address */
+ tmpreg1 |=(((uint32_t)PHYReg<<6U) & ETH_MACMIIAR_MR); /* Set the PHY register address */
+ tmpreg1 &= ~ETH_MACMIIAR_MW; /* Set the read mode */
+ tmpreg1 |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */
+
+ /* Write the result value into the MII Address register */
+ heth->Instance->MACMIIAR = tmpreg1;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check for the Busy flag */
+ while((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > PHY_READ_TO)
+ {
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+
+ tmpreg1 = heth->Instance->MACMIIAR;
+ }
+
+ /* Get MACMIIDR value */
+ *RegValue = (uint16_t)(heth->Instance->MACMIIDR);
+
+ /* Set ETH HAL State to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes to a PHY register.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param PHYReg: PHY register address, is the index of one of the 32 PHY register.
+ * This parameter can be one of the following values:
+ * PHY_BCR: Transceiver Control Register.
+ * More PHY register could be written depending on the used PHY
+ * @param RegValue: the value to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue)
+{
+ uint32_t tmpreg1 = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Check parameters */
+ assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+
+ /* Check the ETH peripheral state */
+ if(heth->State == HAL_ETH_STATE_BUSY_WR)
+ {
+ return HAL_BUSY;
+ }
+ /* Set ETH HAL State to BUSY_WR */
+ heth->State = HAL_ETH_STATE_BUSY_WR;
+
+ /* Get the ETHERNET MACMIIAR value */
+ tmpreg1 = heth->Instance->MACMIIAR;
+
+ /* Keep only the CSR Clock Range CR[2:0] bits value */
+ tmpreg1 &= ~ETH_MACMIIAR_CR_MASK;
+
+ /* Prepare the MII register address value */
+ tmpreg1 |=(((uint32_t)heth->Init.PhyAddress<<11U) & ETH_MACMIIAR_PA); /* Set the PHY device address */
+ tmpreg1 |=(((uint32_t)PHYReg<<6U) & ETH_MACMIIAR_MR); /* Set the PHY register address */
+ tmpreg1 |= ETH_MACMIIAR_MW; /* Set the write mode */
+ tmpreg1 |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */
+
+ /* Give the value to the MII data register */
+ heth->Instance->MACMIIDR = (uint16_t)RegValue;
+
+ /* Write the result value into the MII Address register */
+ heth->Instance->MACMIIAR = tmpreg1;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check for the Busy flag */
+ while((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > PHY_WRITE_TO)
+ {
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+
+ tmpreg1 = heth->Instance->MACMIIAR;
+ }
+
+ /* Set ETH HAL State to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Enable MAC and DMA transmission and reception.
+ HAL_ETH_Start();
+ (+) Disable MAC and DMA transmission and reception.
+ HAL_ETH_Stop();
+ (+) Set the MAC configuration in runtime mode
+ HAL_ETH_ConfigMAC();
+ (+) Set the DMA configuration in runtime mode
+ HAL_ETH_ConfigDMA();
+
+@endverbatim
+ * @{
+ */
+
+ /**
+ * @brief Enables Ethernet MAC and DMA reception/transmission
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth)
+{
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Enable transmit state machine of the MAC for transmission on the MII */
+ ETH_MACTransmissionEnable(heth);
+
+ /* Enable receive state machine of the MAC for reception from the MII */
+ ETH_MACReceptionEnable(heth);
+
+ /* Flush Transmit FIFO */
+ ETH_FlushTransmitFIFO(heth);
+
+ /* Start DMA transmission */
+ ETH_DMATransmissionEnable(heth);
+
+ /* Start DMA reception */
+ ETH_DMAReceptionEnable(heth);
+
+ /* Set the ETH state to READY*/
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop Ethernet MAC and DMA reception/transmission
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth)
+{
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Stop DMA transmission */
+ ETH_DMATransmissionDisable(heth);
+
+ /* Stop DMA reception */
+ ETH_DMAReceptionDisable(heth);
+
+ /* Disable receive state machine of the MAC for reception from the MII */
+ ETH_MACReceptionDisable(heth);
+
+ /* Flush Transmit FIFO */
+ ETH_FlushTransmitFIFO(heth);
+
+ /* Disable transmit state machine of the MAC for transmission on the MII */
+ ETH_MACTransmissionDisable(heth);
+
+ /* Set the ETH state*/
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Set ETH MAC Configuration.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param macconf: MAC Configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf)
+{
+ uint32_t tmpreg1 = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State= HAL_ETH_STATE_BUSY;
+
+ assert_param(IS_ETH_SPEED(heth->Init.Speed));
+ assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+
+ if (macconf != NULL)
+ {
+ /* Check the parameters */
+ assert_param(IS_ETH_WATCHDOG(macconf->Watchdog));
+ assert_param(IS_ETH_JABBER(macconf->Jabber));
+ assert_param(IS_ETH_INTER_FRAME_GAP(macconf->InterFrameGap));
+ assert_param(IS_ETH_CARRIER_SENSE(macconf->CarrierSense));
+ assert_param(IS_ETH_RECEIVE_OWN(macconf->ReceiveOwn));
+ assert_param(IS_ETH_LOOPBACK_MODE(macconf->LoopbackMode));
+ assert_param(IS_ETH_CHECKSUM_OFFLOAD(macconf->ChecksumOffload));
+ assert_param(IS_ETH_RETRY_TRANSMISSION(macconf->RetryTransmission));
+ assert_param(IS_ETH_AUTOMATIC_PADCRC_STRIP(macconf->AutomaticPadCRCStrip));
+ assert_param(IS_ETH_BACKOFF_LIMIT(macconf->BackOffLimit));
+ assert_param(IS_ETH_DEFERRAL_CHECK(macconf->DeferralCheck));
+ assert_param(IS_ETH_RECEIVE_ALL(macconf->ReceiveAll));
+ assert_param(IS_ETH_SOURCE_ADDR_FILTER(macconf->SourceAddrFilter));
+ assert_param(IS_ETH_CONTROL_FRAMES(macconf->PassControlFrames));
+ assert_param(IS_ETH_BROADCAST_FRAMES_RECEPTION(macconf->BroadcastFramesReception));
+ assert_param(IS_ETH_DESTINATION_ADDR_FILTER(macconf->DestinationAddrFilter));
+ assert_param(IS_ETH_PROMISCUOUS_MODE(macconf->PromiscuousMode));
+ assert_param(IS_ETH_MULTICAST_FRAMES_FILTER(macconf->MulticastFramesFilter));
+ assert_param(IS_ETH_UNICAST_FRAMES_FILTER(macconf->UnicastFramesFilter));
+ assert_param(IS_ETH_PAUSE_TIME(macconf->PauseTime));
+ assert_param(IS_ETH_ZEROQUANTA_PAUSE(macconf->ZeroQuantaPause));
+ assert_param(IS_ETH_PAUSE_LOW_THRESHOLD(macconf->PauseLowThreshold));
+ assert_param(IS_ETH_UNICAST_PAUSE_FRAME_DETECT(macconf->UnicastPauseFrameDetect));
+ assert_param(IS_ETH_RECEIVE_FLOWCONTROL(macconf->ReceiveFlowControl));
+ assert_param(IS_ETH_TRANSMIT_FLOWCONTROL(macconf->TransmitFlowControl));
+ assert_param(IS_ETH_VLAN_TAG_COMPARISON(macconf->VLANTagComparison));
+ assert_param(IS_ETH_VLAN_TAG_IDENTIFIER(macconf->VLANTagIdentifier));
+
+ /*------------------------ ETHERNET MACCR Configuration --------------------*/
+ /* Get the ETHERNET MACCR value */
+ tmpreg1 = (heth->Instance)->MACCR;
+ /* Clear WD, PCE, PS, TE and RE bits */
+ tmpreg1 &= ETH_MACCR_CLEAR_MASK;
+
+ tmpreg1 |= (uint32_t)(macconf->Watchdog |
+ macconf->Jabber |
+ macconf->InterFrameGap |
+ macconf->CarrierSense |
+ (heth->Init).Speed |
+ macconf->ReceiveOwn |
+ macconf->LoopbackMode |
+ (heth->Init).DuplexMode |
+ macconf->ChecksumOffload |
+ macconf->RetryTransmission |
+ macconf->AutomaticPadCRCStrip |
+ macconf->BackOffLimit |
+ macconf->DeferralCheck);
+
+ /* Write to ETHERNET MACCR */
+ (heth->Instance)->MACCR = (uint32_t)tmpreg1;
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg1;
+
+ /*----------------------- ETHERNET MACFFR Configuration --------------------*/
+ /* Write to ETHERNET MACFFR */
+ (heth->Instance)->MACFFR = (uint32_t)(macconf->ReceiveAll |
+ macconf->SourceAddrFilter |
+ macconf->PassControlFrames |
+ macconf->BroadcastFramesReception |
+ macconf->DestinationAddrFilter |
+ macconf->PromiscuousMode |
+ macconf->MulticastFramesFilter |
+ macconf->UnicastFramesFilter);
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACFFR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFFR = tmpreg1;
+
+ /*--------------- ETHERNET MACHTHR and MACHTLR Configuration ---------------*/
+ /* Write to ETHERNET MACHTHR */
+ (heth->Instance)->MACHTHR = (uint32_t)macconf->HashTableHigh;
+
+ /* Write to ETHERNET MACHTLR */
+ (heth->Instance)->MACHTLR = (uint32_t)macconf->HashTableLow;
+ /*----------------------- ETHERNET MACFCR Configuration --------------------*/
+
+ /* Get the ETHERNET MACFCR value */
+ tmpreg1 = (heth->Instance)->MACFCR;
+ /* Clear xx bits */
+ tmpreg1 &= ETH_MACFCR_CLEAR_MASK;
+
+ tmpreg1 |= (uint32_t)((macconf->PauseTime << 16U) |
+ macconf->ZeroQuantaPause |
+ macconf->PauseLowThreshold |
+ macconf->UnicastPauseFrameDetect |
+ macconf->ReceiveFlowControl |
+ macconf->TransmitFlowControl);
+
+ /* Write to ETHERNET MACFCR */
+ (heth->Instance)->MACFCR = (uint32_t)tmpreg1;
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACFCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFCR = tmpreg1;
+
+ /*----------------------- ETHERNET MACVLANTR Configuration -----------------*/
+ (heth->Instance)->MACVLANTR = (uint32_t)(macconf->VLANTagComparison |
+ macconf->VLANTagIdentifier);
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACVLANTR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACVLANTR = tmpreg1;
+ }
+ else /* macconf == NULL : here we just configure Speed and Duplex mode */
+ {
+ /*------------------------ ETHERNET MACCR Configuration --------------------*/
+ /* Get the ETHERNET MACCR value */
+ tmpreg1 = (heth->Instance)->MACCR;
+
+ /* Clear FES and DM bits */
+ tmpreg1 &= ~((uint32_t)0x00004800U);
+
+ tmpreg1 |= (uint32_t)(heth->Init.Speed | heth->Init.DuplexMode);
+
+ /* Write to ETHERNET MACCR */
+ (heth->Instance)->MACCR = (uint32_t)tmpreg1;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg1;
+ }
+
+ /* Set the ETH state to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets ETH DMA Configuration.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param dmaconf: DMA Configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf)
+{
+ uint32_t tmpreg1 = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State= HAL_ETH_STATE_BUSY;
+
+ /* Check parameters */
+ assert_param(IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(dmaconf->DropTCPIPChecksumErrorFrame));
+ assert_param(IS_ETH_RECEIVE_STORE_FORWARD(dmaconf->ReceiveStoreForward));
+ assert_param(IS_ETH_FLUSH_RECEIVE_FRAME(dmaconf->FlushReceivedFrame));
+ assert_param(IS_ETH_TRANSMIT_STORE_FORWARD(dmaconf->TransmitStoreForward));
+ assert_param(IS_ETH_TRANSMIT_THRESHOLD_CONTROL(dmaconf->TransmitThresholdControl));
+ assert_param(IS_ETH_FORWARD_ERROR_FRAMES(dmaconf->ForwardErrorFrames));
+ assert_param(IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(dmaconf->ForwardUndersizedGoodFrames));
+ assert_param(IS_ETH_RECEIVE_THRESHOLD_CONTROL(dmaconf->ReceiveThresholdControl));
+ assert_param(IS_ETH_SECOND_FRAME_OPERATE(dmaconf->SecondFrameOperate));
+ assert_param(IS_ETH_ADDRESS_ALIGNED_BEATS(dmaconf->AddressAlignedBeats));
+ assert_param(IS_ETH_FIXED_BURST(dmaconf->FixedBurst));
+ assert_param(IS_ETH_RXDMA_BURST_LENGTH(dmaconf->RxDMABurstLength));
+ assert_param(IS_ETH_TXDMA_BURST_LENGTH(dmaconf->TxDMABurstLength));
+ assert_param(IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(dmaconf->EnhancedDescriptorFormat));
+ assert_param(IS_ETH_DMA_DESC_SKIP_LENGTH(dmaconf->DescriptorSkipLength));
+ assert_param(IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(dmaconf->DMAArbitration));
+
+ /*----------------------- ETHERNET DMAOMR Configuration --------------------*/
+ /* Get the ETHERNET DMAOMR value */
+ tmpreg1 = (heth->Instance)->DMAOMR;
+ /* Clear xx bits */
+ tmpreg1 &= ETH_DMAOMR_CLEAR_MASK;
+
+ tmpreg1 |= (uint32_t)(dmaconf->DropTCPIPChecksumErrorFrame |
+ dmaconf->ReceiveStoreForward |
+ dmaconf->FlushReceivedFrame |
+ dmaconf->TransmitStoreForward |
+ dmaconf->TransmitThresholdControl |
+ dmaconf->ForwardErrorFrames |
+ dmaconf->ForwardUndersizedGoodFrames |
+ dmaconf->ReceiveThresholdControl |
+ dmaconf->SecondFrameOperate);
+
+ /* Write to ETHERNET DMAOMR */
+ (heth->Instance)->DMAOMR = (uint32_t)tmpreg1;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->DMAOMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMAOMR = tmpreg1;
+
+ /*----------------------- ETHERNET DMABMR Configuration --------------------*/
+ (heth->Instance)->DMABMR = (uint32_t)(dmaconf->AddressAlignedBeats |
+ dmaconf->FixedBurst |
+ dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+ dmaconf->TxDMABurstLength |
+ dmaconf->EnhancedDescriptorFormat |
+ (dmaconf->DescriptorSkipLength << 2U) |
+ dmaconf->DMAArbitration |
+ ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->DMABMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMABMR = tmpreg1;
+
+ /* Set the ETH state to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+ (+) Get the ETH handle state:
+ HAL_ETH_GetState();
+
+
+ @endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the ETH HAL state
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL state
+ */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth)
+{
+ /* Return ETH state */
+ return heth->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup ETH_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures Ethernet MAC and DMA with default parameters.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param err: Ethernet Init error
+ * @retval HAL status
+ */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err)
+{
+ ETH_MACInitTypeDef macinit;
+ ETH_DMAInitTypeDef dmainit;
+ uint32_t tmpreg1 = 0U;
+
+ if (err != ETH_SUCCESS) /* Auto-negotiation failed */
+ {
+ /* Set Ethernet duplex mode to Full-duplex */
+ (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+
+ /* Set Ethernet speed to 100M */
+ (heth->Init).Speed = ETH_SPEED_100M;
+ }
+
+ /* Ethernet MAC default initialization **************************************/
+ macinit.Watchdog = ETH_WATCHDOG_ENABLE;
+ macinit.Jabber = ETH_JABBER_ENABLE;
+ macinit.InterFrameGap = ETH_INTERFRAMEGAP_96BIT;
+ macinit.CarrierSense = ETH_CARRIERSENCE_ENABLE;
+ macinit.ReceiveOwn = ETH_RECEIVEOWN_ENABLE;
+ macinit.LoopbackMode = ETH_LOOPBACKMODE_DISABLE;
+ if(heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+ {
+ macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE;
+ }
+ else
+ {
+ macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE;
+ }
+ macinit.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE;
+ macinit.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE;
+ macinit.BackOffLimit = ETH_BACKOFFLIMIT_10;
+ macinit.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE;
+ macinit.ReceiveAll = ETH_RECEIVEAll_DISABLE;
+ macinit.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE;
+ macinit.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL;
+ macinit.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE;
+ macinit.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL;
+ macinit.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE;
+ macinit.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_PERFECT;
+ macinit.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT;
+ macinit.HashTableHigh = 0x0U;
+ macinit.HashTableLow = 0x0U;
+ macinit.PauseTime = 0x0U;
+ macinit.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE;
+ macinit.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4;
+ macinit.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE;
+ macinit.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE;
+ macinit.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE;
+ macinit.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT;
+ macinit.VLANTagIdentifier = 0x0U;
+
+ /*------------------------ ETHERNET MACCR Configuration --------------------*/
+ /* Get the ETHERNET MACCR value */
+ tmpreg1 = (heth->Instance)->MACCR;
+ /* Clear WD, PCE, PS, TE and RE bits */
+ tmpreg1 &= ETH_MACCR_CLEAR_MASK;
+ /* Set the WD bit according to ETH Watchdog value */
+ /* Set the JD: bit according to ETH Jabber value */
+ /* Set the IFG bit according to ETH InterFrameGap value */
+ /* Set the DCRS bit according to ETH CarrierSense value */
+ /* Set the FES bit according to ETH Speed value */
+ /* Set the DO bit according to ETH ReceiveOwn value */
+ /* Set the LM bit according to ETH LoopbackMode value */
+ /* Set the DM bit according to ETH Mode value */
+ /* Set the IPCO bit according to ETH ChecksumOffload value */
+ /* Set the DR bit according to ETH RetryTransmission value */
+ /* Set the ACS bit according to ETH AutomaticPadCRCStrip value */
+ /* Set the BL bit according to ETH BackOffLimit value */
+ /* Set the DC bit according to ETH DeferralCheck value */
+ tmpreg1 |= (uint32_t)(macinit.Watchdog |
+ macinit.Jabber |
+ macinit.InterFrameGap |
+ macinit.CarrierSense |
+ (heth->Init).Speed |
+ macinit.ReceiveOwn |
+ macinit.LoopbackMode |
+ (heth->Init).DuplexMode |
+ macinit.ChecksumOffload |
+ macinit.RetryTransmission |
+ macinit.AutomaticPadCRCStrip |
+ macinit.BackOffLimit |
+ macinit.DeferralCheck);
+
+ /* Write to ETHERNET MACCR */
+ (heth->Instance)->MACCR = (uint32_t)tmpreg1;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg1;
+
+ /*----------------------- ETHERNET MACFFR Configuration --------------------*/
+ /* Set the RA bit according to ETH ReceiveAll value */
+ /* Set the SAF and SAIF bits according to ETH SourceAddrFilter value */
+ /* Set the PCF bit according to ETH PassControlFrames value */
+ /* Set the DBF bit according to ETH BroadcastFramesReception value */
+ /* Set the DAIF bit according to ETH DestinationAddrFilter value */
+ /* Set the PR bit according to ETH PromiscuousMode value */
+ /* Set the PM, HMC and HPF bits according to ETH MulticastFramesFilter value */
+ /* Set the HUC and HPF bits according to ETH UnicastFramesFilter value */
+ /* Write to ETHERNET MACFFR */
+ (heth->Instance)->MACFFR = (uint32_t)(macinit.ReceiveAll |
+ macinit.SourceAddrFilter |
+ macinit.PassControlFrames |
+ macinit.BroadcastFramesReception |
+ macinit.DestinationAddrFilter |
+ macinit.PromiscuousMode |
+ macinit.MulticastFramesFilter |
+ macinit.UnicastFramesFilter);
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACFFR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFFR = tmpreg1;
+
+ /*--------------- ETHERNET MACHTHR and MACHTLR Configuration --------------*/
+ /* Write to ETHERNET MACHTHR */
+ (heth->Instance)->MACHTHR = (uint32_t)macinit.HashTableHigh;
+
+ /* Write to ETHERNET MACHTLR */
+ (heth->Instance)->MACHTLR = (uint32_t)macinit.HashTableLow;
+ /*----------------------- ETHERNET MACFCR Configuration -------------------*/
+
+ /* Get the ETHERNET MACFCR value */
+ tmpreg1 = (heth->Instance)->MACFCR;
+ /* Clear xx bits */
+ tmpreg1 &= ETH_MACFCR_CLEAR_MASK;
+
+ /* Set the PT bit according to ETH PauseTime value */
+ /* Set the DZPQ bit according to ETH ZeroQuantaPause value */
+ /* Set the PLT bit according to ETH PauseLowThreshold value */
+ /* Set the UP bit according to ETH UnicastPauseFrameDetect value */
+ /* Set the RFE bit according to ETH ReceiveFlowControl value */
+ /* Set the TFE bit according to ETH TransmitFlowControl value */
+ tmpreg1 |= (uint32_t)((macinit.PauseTime << 16U) |
+ macinit.ZeroQuantaPause |
+ macinit.PauseLowThreshold |
+ macinit.UnicastPauseFrameDetect |
+ macinit.ReceiveFlowControl |
+ macinit.TransmitFlowControl);
+
+ /* Write to ETHERNET MACFCR */
+ (heth->Instance)->MACFCR = (uint32_t)tmpreg1;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACFCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFCR = tmpreg1;
+
+ /*----------------------- ETHERNET MACVLANTR Configuration ----------------*/
+ /* Set the ETV bit according to ETH VLANTagComparison value */
+ /* Set the VL bit according to ETH VLANTagIdentifier value */
+ (heth->Instance)->MACVLANTR = (uint32_t)(macinit.VLANTagComparison |
+ macinit.VLANTagIdentifier);
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACVLANTR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACVLANTR = tmpreg1;
+
+ /* Ethernet DMA default initialization ************************************/
+ dmainit.DropTCPIPChecksumErrorFrame = ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE;
+ dmainit.ReceiveStoreForward = ETH_RECEIVESTOREFORWARD_ENABLE;
+ dmainit.FlushReceivedFrame = ETH_FLUSHRECEIVEDFRAME_ENABLE;
+ dmainit.TransmitStoreForward = ETH_TRANSMITSTOREFORWARD_ENABLE;
+ dmainit.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES;
+ dmainit.ForwardErrorFrames = ETH_FORWARDERRORFRAMES_DISABLE;
+ dmainit.ForwardUndersizedGoodFrames = ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE;
+ dmainit.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES;
+ dmainit.SecondFrameOperate = ETH_SECONDFRAMEOPERARTE_ENABLE;
+ dmainit.AddressAlignedBeats = ETH_ADDRESSALIGNEDBEATS_ENABLE;
+ dmainit.FixedBurst = ETH_FIXEDBURST_ENABLE;
+ dmainit.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT;
+ dmainit.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT;
+ dmainit.EnhancedDescriptorFormat = ETH_DMAENHANCEDDESCRIPTOR_ENABLE;
+ dmainit.DescriptorSkipLength = 0x0U;
+ dmainit.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1;
+
+ /* Get the ETHERNET DMAOMR value */
+ tmpreg1 = (heth->Instance)->DMAOMR;
+ /* Clear xx bits */
+ tmpreg1 &= ETH_DMAOMR_CLEAR_MASK;
+
+ /* Set the DT bit according to ETH DropTCPIPChecksumErrorFrame value */
+ /* Set the RSF bit according to ETH ReceiveStoreForward value */
+ /* Set the DFF bit according to ETH FlushReceivedFrame value */
+ /* Set the TSF bit according to ETH TransmitStoreForward value */
+ /* Set the TTC bit according to ETH TransmitThresholdControl value */
+ /* Set the FEF bit according to ETH ForwardErrorFrames value */
+ /* Set the FUF bit according to ETH ForwardUndersizedGoodFrames value */
+ /* Set the RTC bit according to ETH ReceiveThresholdControl value */
+ /* Set the OSF bit according to ETH SecondFrameOperate value */
+ tmpreg1 |= (uint32_t)(dmainit.DropTCPIPChecksumErrorFrame |
+ dmainit.ReceiveStoreForward |
+ dmainit.FlushReceivedFrame |
+ dmainit.TransmitStoreForward |
+ dmainit.TransmitThresholdControl |
+ dmainit.ForwardErrorFrames |
+ dmainit.ForwardUndersizedGoodFrames |
+ dmainit.ReceiveThresholdControl |
+ dmainit.SecondFrameOperate);
+
+ /* Write to ETHERNET DMAOMR */
+ (heth->Instance)->DMAOMR = (uint32_t)tmpreg1;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->DMAOMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMAOMR = tmpreg1;
+
+ /*----------------------- ETHERNET DMABMR Configuration ------------------*/
+ /* Set the AAL bit according to ETH AddressAlignedBeats value */
+ /* Set the FB bit according to ETH FixedBurst value */
+ /* Set the RPBL and 4*PBL bits according to ETH RxDMABurstLength value */
+ /* Set the PBL and 4*PBL bits according to ETH TxDMABurstLength value */
+ /* Set the Enhanced DMA descriptors bit according to ETH EnhancedDescriptorFormat value*/
+ /* Set the DSL bit according to ETH DesciptorSkipLength value */
+ /* Set the PR and DA bits according to ETH DMAArbitration value */
+ (heth->Instance)->DMABMR = (uint32_t)(dmainit.AddressAlignedBeats |
+ dmainit.FixedBurst |
+ dmainit.RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+ dmainit.TxDMABurstLength |
+ dmainit.EnhancedDescriptorFormat |
+ (dmainit.DescriptorSkipLength << 2U) |
+ dmainit.DMAArbitration |
+ ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->DMABMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMABMR = tmpreg1;
+
+ if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+ {
+ /* Enable the Ethernet Rx Interrupt */
+ __HAL_ETH_DMA_ENABLE_IT((heth), ETH_DMA_IT_NIS | ETH_DMA_IT_R);
+ }
+
+ /* Initialize MAC address in ethernet MAC */
+ ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr);
+}
+
+/**
+ * @brief Configures the selected MAC address.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param MacAddr: The MAC address to configure
+ * This parameter can be one of the following values:
+ * @arg ETH_MAC_Address0: MAC Address0
+ * @arg ETH_MAC_Address1: MAC Address1
+ * @arg ETH_MAC_Address2: MAC Address2
+ * @arg ETH_MAC_Address3: MAC Address3
+ * @param Addr: Pointer to MAC address buffer data (6 bytes)
+ * @retval HAL status
+ */
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr)
+{
+ uint32_t tmpreg1;
+
+ /* Check the parameters */
+ assert_param(IS_ETH_MAC_ADDRESS0123(MacAddr));
+
+ /* Calculate the selected MAC address high register */
+ tmpreg1 = ((uint32_t)Addr[5U] << 8U) | (uint32_t)Addr[4U];
+ /* Load the selected MAC address high register */
+ (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_HBASE + MacAddr))) = tmpreg1;
+ /* Calculate the selected MAC address low register */
+ tmpreg1 = ((uint32_t)Addr[3U] << 24U) | ((uint32_t)Addr[2U] << 16U) | ((uint32_t)Addr[1U] << 8U) | Addr[0U];
+
+ /* Load the selected MAC address low register */
+ (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_LBASE + MacAddr))) = tmpreg1;
+}
+
+/**
+ * @brief Enables the MAC transmission.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg1 = 0U;
+
+ /* Enable the MAC transmission */
+ (heth->Instance)->MACCR |= ETH_MACCR_TE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACCR;
+ ETH_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+ * @brief Disables the MAC transmission.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg1 = 0U;
+
+ /* Disable the MAC transmission */
+ (heth->Instance)->MACCR &= ~ETH_MACCR_TE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACCR;
+ ETH_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+ * @brief Enables the MAC reception.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg1 = 0U;
+
+ /* Enable the MAC reception */
+ (heth->Instance)->MACCR |= ETH_MACCR_RE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACCR;
+ ETH_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+ * @brief Disables the MAC reception.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg1 = 0U;
+
+ /* Disable the MAC reception */
+ (heth->Instance)->MACCR &= ~ETH_MACCR_RE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->MACCR;
+ ETH_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+ * @brief Enables the DMA transmission.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth)
+{
+ /* Enable the DMA transmission */
+ (heth->Instance)->DMAOMR |= ETH_DMAOMR_ST;
+}
+
+/**
+ * @brief Disables the DMA transmission.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth)
+{
+ /* Disable the DMA transmission */
+ (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_ST;
+}
+
+/**
+ * @brief Enables the DMA reception.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth)
+{
+ /* Enable the DMA reception */
+ (heth->Instance)->DMAOMR |= ETH_DMAOMR_SR;
+}
+
+/**
+ * @brief Disables the DMA reception.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth)
+{
+ /* Disable the DMA reception */
+ (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_SR;
+}
+
+/**
+ * @brief Clears the ETHERNET transmit FIFO.
+ * @param heth: pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg1 = 0U;
+
+ /* Set the Flush Transmit FIFO bit */
+ (heth->Instance)->DMAOMR |= ETH_DMAOMR_FTF;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg1 = (heth->Instance)->DMAOMR;
+ ETH_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMAOMR = tmpreg1;
+}
+
+/**
+ * @brief This function provides delay (in milliseconds) based on CPU cycles method.
+ * @param mdelay: specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+static void ETH_Delay(uint32_t mdelay)
+{
+ __IO uint32_t Delay = mdelay * (SystemCoreClock / 8 / 1000);
+ do
+ {
+ __NOP();
+ }
+ while (Delay --);
+}
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx ||\
+ STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_ETH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2183 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_eth.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of ETH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_ETH_H
+#define __STM32F4xx_HAL_ETH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ETH
+ * @{
+ */
+
+/** @addtogroup ETH_Private_Macros
+ * @{
+ */
+#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20U)
+#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \
+ ((CMD) == ETH_AUTONEGOTIATION_DISABLE))
+#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
+ ((SPEED) == ETH_SPEED_100M))
+#define IS_ETH_DUPLEX_MODE(MODE) (((MODE) == ETH_MODE_FULLDUPLEX) || \
+ ((MODE) == ETH_MODE_HALFDUPLEX))
+#define IS_ETH_RX_MODE(MODE) (((MODE) == ETH_RXPOLLING_MODE) || \
+ ((MODE) == ETH_RXINTERRUPT_MODE))
+#define IS_ETH_CHECKSUM_MODE(MODE) (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \
+ ((MODE) == ETH_CHECKSUM_BY_SOFTWARE))
+#define IS_ETH_MEDIA_INTERFACE(MODE) (((MODE) == ETH_MEDIA_INTERFACE_MII) || \
+ ((MODE) == ETH_MEDIA_INTERFACE_RMII))
+#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \
+ ((CMD) == ETH_WATCHDOG_DISABLE))
+#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \
+ ((CMD) == ETH_JABBER_DISABLE))
+#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_40BIT))
+#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \
+ ((CMD) == ETH_CARRIERSENCE_DISABLE))
+#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \
+ ((CMD) == ETH_RECEIVEOWN_DISABLE))
+#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \
+ ((CMD) == ETH_LOOPBACKMODE_DISABLE))
+#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \
+ ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE))
+#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \
+ ((CMD) == ETH_RETRYTRANSMISSION_DISABLE))
+#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \
+ ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE))
+#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_8) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_4) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_1))
+#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \
+ ((CMD) == ETH_DEFFERRALCHECK_DISABLE))
+#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEAll_DISABLE))
+#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_DISABLE))
+#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER))
+#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \
+ ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE))
+#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \
+ ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE))
+#define IS_ETH_PROMISCUOUS_MODE(CMD) (((CMD) == ETH_PROMISCUOUS_MODE_ENABLE) || \
+ ((CMD) == ETH_PROMISCUOUS_MODE_DISABLE))
+#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE))
+#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT))
+#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFFU)
+#define IS_ETH_ZEROQUANTA_PAUSE(CMD) (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \
+ ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE))
+#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256))
+#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \
+ ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE))
+#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE))
+#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE))
+#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \
+ ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT))
+#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFFU)
+#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \
+ ((FILTER) == ETH_MAC_ADDRESSFILTER_DA))
+#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1))
+#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \
+ ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE))
+#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE))
+#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \
+ ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE))
+#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE))
+#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES))
+#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE))
+#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE))
+#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES))
+#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \
+ ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE))
+#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \
+ ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE))
+#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \
+ ((CMD) == ETH_FIXEDBURST_DISABLE))
+#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1FU)
+#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX))
+#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \
+ ((FLAG) == ETH_DMATXDESC_IC) || \
+ ((FLAG) == ETH_DMATXDESC_LS) || \
+ ((FLAG) == ETH_DMATXDESC_FS) || \
+ ((FLAG) == ETH_DMATXDESC_DC) || \
+ ((FLAG) == ETH_DMATXDESC_DP) || \
+ ((FLAG) == ETH_DMATXDESC_TTSE) || \
+ ((FLAG) == ETH_DMATXDESC_TER) || \
+ ((FLAG) == ETH_DMATXDESC_TCH) || \
+ ((FLAG) == ETH_DMATXDESC_TTSS) || \
+ ((FLAG) == ETH_DMATXDESC_IHE) || \
+ ((FLAG) == ETH_DMATXDESC_ES) || \
+ ((FLAG) == ETH_DMATXDESC_JT) || \
+ ((FLAG) == ETH_DMATXDESC_FF) || \
+ ((FLAG) == ETH_DMATXDESC_PCE) || \
+ ((FLAG) == ETH_DMATXDESC_LCA) || \
+ ((FLAG) == ETH_DMATXDESC_NC) || \
+ ((FLAG) == ETH_DMATXDESC_LCO) || \
+ ((FLAG) == ETH_DMATXDESC_EC) || \
+ ((FLAG) == ETH_DMATXDESC_VF) || \
+ ((FLAG) == ETH_DMATXDESC_CC) || \
+ ((FLAG) == ETH_DMATXDESC_ED) || \
+ ((FLAG) == ETH_DMATXDESC_UF) || \
+ ((FLAG) == ETH_DMATXDESC_DB))
+#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \
+ ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT))
+#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL))
+#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFFU)
+#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \
+ ((FLAG) == ETH_DMARXDESC_AFM) || \
+ ((FLAG) == ETH_DMARXDESC_ES) || \
+ ((FLAG) == ETH_DMARXDESC_DE) || \
+ ((FLAG) == ETH_DMARXDESC_SAF) || \
+ ((FLAG) == ETH_DMARXDESC_LE) || \
+ ((FLAG) == ETH_DMARXDESC_OE) || \
+ ((FLAG) == ETH_DMARXDESC_VLAN) || \
+ ((FLAG) == ETH_DMARXDESC_FS) || \
+ ((FLAG) == ETH_DMARXDESC_LS) || \
+ ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \
+ ((FLAG) == ETH_DMARXDESC_LC) || \
+ ((FLAG) == ETH_DMARXDESC_FT) || \
+ ((FLAG) == ETH_DMARXDESC_RWT) || \
+ ((FLAG) == ETH_DMARXDESC_RE) || \
+ ((FLAG) == ETH_DMARXDESC_DBE) || \
+ ((FLAG) == ETH_DMARXDESC_CE) || \
+ ((FLAG) == ETH_DMARXDESC_MAMPCE))
+#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \
+ ((BUFFER) == ETH_DMARXDESC_BUFFER2))
+#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \
+ ((FLAG) == ETH_PMT_FLAG_MPR))
+#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & (uint32_t)0xC7FE1800U) == 0x00U) && ((FLAG) != 0x00U))
+#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \
+ ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \
+ ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \
+ ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \
+ ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \
+ ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \
+ ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \
+ ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \
+ ((FLAG) == ETH_DMA_FLAG_T))
+#define IS_ETH_MAC_IT(IT) ((((IT) & (uint32_t)0xFFFFFDF1U) == 0x00U) && ((IT) != 0x00U))
+#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \
+ ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \
+ ((IT) == ETH_MAC_IT_PMT))
+#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \
+ ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \
+ ((FLAG) == ETH_MAC_FLAG_PMT))
+#define IS_ETH_DMA_IT(IT) ((((IT) & (uint32_t)0xC7FE1800U) == 0x00U) && ((IT) != 0x00U))
+#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \
+ ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \
+ ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \
+ ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \
+ ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \
+ ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \
+ ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \
+ ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \
+ ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T))
+#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \
+ ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER))
+#define IS_ETH_MMC_IT(IT) (((((IT) & (uint32_t)0xFFDF3FFFU) == 0x00U) || (((IT) & (uint32_t)0xEFFDFF9FU) == 0x00U)) && \
+ ((IT) != 0x00U))
+#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \
+ ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \
+ ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE))
+#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \
+ ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @addtogroup ETH_Private_Defines
+ * @{
+ */
+/* Delay to wait when writing to some Ethernet registers */
+#define ETH_REG_WRITE_DELAY ((uint32_t)0x00000001U)
+
+/* ETHERNET Errors */
+#define ETH_SUCCESS ((uint32_t)0U)
+#define ETH_ERROR ((uint32_t)1U)
+
+/* ETHERNET DMA Tx descriptors Collision Count Shift */
+#define ETH_DMATXDESC_COLLISION_COUNTSHIFT ((uint32_t)3U)
+
+/* ETHERNET DMA Tx descriptors Buffer2 Size Shift */
+#define ETH_DMATXDESC_BUFFER2_SIZESHIFT ((uint32_t)16U)
+
+/* ETHERNET DMA Rx descriptors Frame Length Shift */
+#define ETH_DMARXDESC_FRAME_LENGTHSHIFT ((uint32_t)16U)
+
+/* ETHERNET DMA Rx descriptors Buffer2 Size Shift */
+#define ETH_DMARXDESC_BUFFER2_SIZESHIFT ((uint32_t)16U)
+
+/* ETHERNET DMA Rx descriptors Frame length Shift */
+#define ETH_DMARXDESC_FRAMELENGTHSHIFT ((uint32_t)16U)
+
+/* ETHERNET MAC address offsets */
+#define ETH_MAC_ADDR_HBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x40U) /* ETHERNET MAC address high offset */
+#define ETH_MAC_ADDR_LBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x44U) /* ETHERNET MAC address low offset */
+
+/* ETHERNET MACMIIAR register Mask */
+#define ETH_MACMIIAR_CR_MASK ((uint32_t)0xFFFFFFE3U)
+
+/* ETHERNET MACCR register Mask */
+#define ETH_MACCR_CLEAR_MASK ((uint32_t)0xFF20810FU)
+
+/* ETHERNET MACFCR register Mask */
+#define ETH_MACFCR_CLEAR_MASK ((uint32_t)0x0000FF41U)
+
+/* ETHERNET DMAOMR register Mask */
+#define ETH_DMAOMR_CLEAR_MASK ((uint32_t)0xF8DE3F23U)
+
+/* ETHERNET Remote Wake-up frame register length */
+#define ETH_WAKEUP_REGISTER_LENGTH 8
+
+/* ETHERNET Missed frames counter Shift */
+#define ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT 17U
+ /**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Types ETH Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_ETH_STATE_RESET = 0x00U, /*!< Peripheral not yet Initialized or disabled */
+ HAL_ETH_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_ETH_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_ETH_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */
+ HAL_ETH_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_WR = 0x42U, /*!< Write process is ongoing */
+ HAL_ETH_STATE_BUSY_RD = 0x82U, /*!< Read process is ongoing */
+ HAL_ETH_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_ETH_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
+}HAL_ETH_StateTypeDef;
+
+/**
+ * @brief ETH Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t AutoNegotiation; /*!< Selects or not the AutoNegotiation mode for the external PHY
+ The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
+ and the mode (half/full-duplex).
+ This parameter can be a value of @ref ETH_AutoNegotiation */
+
+ uint32_t Speed; /*!< Sets the Ethernet speed: 10/100 Mbps.
+ This parameter can be a value of @ref ETH_Speed */
+
+ uint32_t DuplexMode; /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
+ This parameter can be a value of @ref ETH_Duplex_Mode */
+
+ uint16_t PhyAddress; /*!< Ethernet PHY address.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint8_t *MACAddr; /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
+
+ uint32_t RxMode; /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
+ This parameter can be a value of @ref ETH_Rx_Mode */
+
+ uint32_t ChecksumMode; /*!< Selects if the checksum is check by hardware or by software.
+ This parameter can be a value of @ref ETH_Checksum_Mode */
+
+ uint32_t MediaInterface; /*!< Selects the media-independent interface or the reduced media-independent interface.
+ This parameter can be a value of @ref ETH_Media_Interface */
+
+} ETH_InitTypeDef;
+
+
+ /**
+ * @brief ETH MAC Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t Watchdog; /*!< Selects or not the Watchdog timer
+ When enabled, the MAC allows no more then 2048 bytes to be received.
+ When disabled, the MAC can receive up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Watchdog */
+
+ uint32_t Jabber; /*!< Selects or not Jabber timer
+ When enabled, the MAC allows no more then 2048 bytes to be sent.
+ When disabled, the MAC can send up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Jabber */
+
+ uint32_t InterFrameGap; /*!< Selects the minimum IFG between frames during transmission.
+ This parameter can be a value of @ref ETH_Inter_Frame_Gap */
+
+ uint32_t CarrierSense; /*!< Selects or not the Carrier Sense.
+ This parameter can be a value of @ref ETH_Carrier_Sense */
+
+ uint32_t ReceiveOwn; /*!< Selects or not the ReceiveOwn,
+ ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
+ in Half-Duplex mode.
+ This parameter can be a value of @ref ETH_Receive_Own */
+
+ uint32_t LoopbackMode; /*!< Selects or not the internal MAC MII Loopback mode.
+ This parameter can be a value of @ref ETH_Loop_Back_Mode */
+
+ uint32_t ChecksumOffload; /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
+ This parameter can be a value of @ref ETH_Checksum_Offload */
+
+ uint32_t RetryTransmission; /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
+ when a collision occurs (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Retry_Transmission */
+
+ uint32_t AutomaticPadCRCStrip; /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
+ This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */
+
+ uint32_t BackOffLimit; /*!< Selects the BackOff limit value.
+ This parameter can be a value of @ref ETH_Back_Off_Limit */
+
+ uint32_t DeferralCheck; /*!< Selects or not the deferral check function (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Deferral_Check */
+
+ uint32_t ReceiveAll; /*!< Selects or not all frames reception by the MAC (No filtering).
+ This parameter can be a value of @ref ETH_Receive_All */
+
+ uint32_t SourceAddrFilter; /*!< Selects the Source Address Filter mode.
+ This parameter can be a value of @ref ETH_Source_Addr_Filter */
+
+ uint32_t PassControlFrames; /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
+ This parameter can be a value of @ref ETH_Pass_Control_Frames */
+
+ uint32_t BroadcastFramesReception; /*!< Selects or not the reception of Broadcast Frames.
+ This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
+
+ uint32_t DestinationAddrFilter; /*!< Sets the destination filter mode for both unicast and multicast frames.
+ This parameter can be a value of @ref ETH_Destination_Addr_Filter */
+
+ uint32_t PromiscuousMode; /*!< Selects or not the Promiscuous Mode
+ This parameter can be a value of @ref ETH_Promiscuous_Mode */
+
+ uint32_t MulticastFramesFilter; /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Multicast_Frames_Filter */
+
+ uint32_t UnicastFramesFilter; /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Unicast_Frames_Filter */
+
+ uint32_t HashTableHigh; /*!< This field holds the higher 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFFU */
+
+ uint32_t HashTableLow; /*!< This field holds the lower 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFFU */
+
+ uint32_t PauseTime; /*!< This field holds the value to be used in the Pause Time field in the transmit control frame.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFU */
+
+ uint32_t ZeroQuantaPause; /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
+ This parameter can be a value of @ref ETH_Zero_Quanta_Pause */
+
+ uint32_t PauseLowThreshold; /*!< This field configures the threshold of the PAUSE to be checked for
+ automatic retransmission of PAUSE Frame.
+ This parameter can be a value of @ref ETH_Pause_Low_Threshold */
+
+ uint32_t UnicastPauseFrameDetect; /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
+ unicast address and unique multicast address).
+ This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */
+
+ uint32_t ReceiveFlowControl; /*!< Enables or disables the MAC to decode the received Pause frame and
+ disable its transmitter for a specified time (Pause Time)
+ This parameter can be a value of @ref ETH_Receive_Flow_Control */
+
+ uint32_t TransmitFlowControl; /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
+ or the MAC back-pressure operation (Half-Duplex mode)
+ This parameter can be a value of @ref ETH_Transmit_Flow_Control */
+
+ uint32_t VLANTagComparison; /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
+ comparison and filtering.
+ This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */
+
+ uint32_t VLANTagIdentifier; /*!< Holds the VLAN tag identifier for receive frames */
+
+} ETH_MACInitTypeDef;
+
+/**
+ * @brief ETH DMA Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
+ This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */
+
+ uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode.
+ This parameter can be a value of @ref ETH_Receive_Store_Forward */
+
+ uint32_t FlushReceivedFrame; /*!< Enables or disables the flushing of received frames.
+ This parameter can be a value of @ref ETH_Flush_Received_Frame */
+
+ uint32_t TransmitStoreForward; /*!< Enables or disables Transmit store and forward mode.
+ This parameter can be a value of @ref ETH_Transmit_Store_Forward */
+
+ uint32_t TransmitThresholdControl; /*!< Selects or not the Transmit Threshold Control.
+ This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
+
+ uint32_t ForwardErrorFrames; /*!< Selects or not the forward to the DMA of erroneous frames.
+ This parameter can be a value of @ref ETH_Forward_Error_Frames */
+
+ uint32_t ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
+ and length less than 64 bytes) including pad-bytes and CRC)
+ This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
+
+ uint32_t ReceiveThresholdControl; /*!< Selects the threshold level of the Receive FIFO.
+ This parameter can be a value of @ref ETH_Receive_Threshold_Control */
+
+ uint32_t SecondFrameOperate; /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
+ frame of Transmit data even before obtaining the status for the first frame.
+ This parameter can be a value of @ref ETH_Second_Frame_Operate */
+
+ uint32_t AddressAlignedBeats; /*!< Enables or disables the Address Aligned Beats.
+ This parameter can be a value of @ref ETH_Address_Aligned_Beats */
+
+ uint32_t FixedBurst; /*!< Enables or disables the AHB Master interface fixed burst transfers.
+ This parameter can be a value of @ref ETH_Fixed_Burst */
+
+ uint32_t RxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
+ This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */
+
+ uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
+ This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
+
+ uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format.
+ This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */
+
+ uint32_t DescriptorSkipLength; /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint32_t DMAArbitration; /*!< Selects the DMA Tx/Rx arbitration.
+ This parameter can be a value of @ref ETH_DMA_Arbitration */
+} ETH_DMAInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Descriptors data structure definition
+ */
+
+typedef struct
+{
+ __IO uint32_t Status; /*!< Status */
+
+ uint32_t ControlBufferSize; /*!< Control and Buffer1, Buffer2 lengths */
+
+ uint32_t Buffer1Addr; /*!< Buffer1 address pointer */
+
+ uint32_t Buffer2NextDescAddr; /*!< Buffer2 or next descriptor address pointer */
+
+ /*!< Enhanced ETHERNET DMA PTP Descriptors */
+ uint32_t ExtendedStatus; /*!< Extended status for PTP receive descriptor */
+
+ uint32_t Reserved1; /*!< Reserved */
+
+ uint32_t TimeStampLow; /*!< Time Stamp Low value for transmit and receive */
+
+ uint32_t TimeStampHigh; /*!< Time Stamp High value for transmit and receive */
+
+} ETH_DMADescTypeDef;
+
+/**
+ * @brief Received Frame Informations structure definition
+ */
+typedef struct
+{
+ ETH_DMADescTypeDef *FSRxDesc; /*!< First Segment Rx Desc */
+
+ ETH_DMADescTypeDef *LSRxDesc; /*!< Last Segment Rx Desc */
+
+ uint32_t SegCount; /*!< Segment count */
+
+ uint32_t length; /*!< Frame length */
+
+ uint32_t buffer; /*!< Frame buffer */
+
+} ETH_DMARxFrameInfos;
+
+/**
+ * @brief ETH Handle Structure definition
+ */
+
+typedef struct
+{
+ ETH_TypeDef *Instance; /*!< Register base address */
+
+ ETH_InitTypeDef Init; /*!< Ethernet Init Configuration */
+
+ uint32_t LinkStatus; /*!< Ethernet link status */
+
+ ETH_DMADescTypeDef *RxDesc; /*!< Rx descriptor to Get */
+
+ ETH_DMADescTypeDef *TxDesc; /*!< Tx descriptor to Set */
+
+ ETH_DMARxFrameInfos RxFrameInfos; /*!< last Rx frame infos */
+
+ __IO HAL_ETH_StateTypeDef State; /*!< ETH communication state */
+
+ HAL_LockTypeDef Lock; /*!< ETH Lock */
+
+} ETH_HandleTypeDef;
+
+ /**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ETH_Exported_Constants ETH Exported Constants
+ * @{
+ */
+
+/** @defgroup ETH_Buffers_setting ETH Buffers setting
+ * @{
+ */
+#define ETH_MAX_PACKET_SIZE ((uint32_t)1524U) /*!< ETH_HEADER + ETH_EXTRA + ETH_VLAN_TAG + ETH_MAX_ETH_PAYLOAD + ETH_CRC */
+#define ETH_HEADER ((uint32_t)14U) /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
+#define ETH_CRC ((uint32_t)4U) /*!< Ethernet CRC */
+#define ETH_EXTRA ((uint32_t)2U) /*!< Extra bytes in some cases */
+#define ETH_VLAN_TAG ((uint32_t)4U) /*!< optional 802.1q VLAN Tag */
+#define ETH_MIN_ETH_PAYLOAD ((uint32_t)46U) /*!< Minimum Ethernet payload size */
+#define ETH_MAX_ETH_PAYLOAD ((uint32_t)1500U) /*!< Maximum Ethernet payload size */
+#define ETH_JUMBO_FRAME_PAYLOAD ((uint32_t)9000U) /*!< Jumbo frame payload size */
+
+ /* Ethernet driver receive buffers are organized in a chained linked-list, when
+ an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO
+ to the driver receive buffers memory.
+
+ Depending on the size of the received ethernet packet and the size of
+ each ethernet driver receive buffer, the received packet can take one or more
+ ethernet driver receive buffer.
+
+ In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE
+ and the total count of the driver receive buffers ETH_RXBUFNB.
+
+ The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_RX_BUF_SIZE
+ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/
+#ifndef ETH_RXBUFNB
+ #define ETH_RXBUFNB ((uint32_t)5U) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */
+#endif
+
+
+ /* Ethernet driver transmit buffers are organized in a chained linked-list, when
+ an ethernet packet is transmitted, Tx-DMA will transfer the packet from the
+ driver transmit buffers memory to the TxFIFO.
+
+ Depending on the size of the Ethernet packet to be transmitted and the size of
+ each ethernet driver transmit buffer, the packet to be transmitted can take
+ one or more ethernet driver transmit buffer.
+
+ In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE
+ and the total count of the driver transmit buffers ETH_TXBUFNB.
+
+ The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_TX_BUF_SIZE
+ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 ethernet driver transmit buffers are used (in a chained linked list)*/
+#ifndef ETH_TXBUFNB
+ #define ETH_TXBUFNB ((uint32_t)5U) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+ /**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_TX_Descriptor ETH DMA TX Descriptor
+ * @{
+ */
+
+/*
+ DMA Tx Descriptor
+ -----------------------------------------------------------------------------------------------
+ TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES2 | Buffer1 Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of TDES0 register: DMA Tx descriptor status register
+ */
+#define ETH_DMATXDESC_OWN ((uint32_t)0x80000000U) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMATXDESC_IC ((uint32_t)0x40000000U) /*!< Interrupt on Completion */
+#define ETH_DMATXDESC_LS ((uint32_t)0x20000000U) /*!< Last Segment */
+#define ETH_DMATXDESC_FS ((uint32_t)0x10000000U) /*!< First Segment */
+#define ETH_DMATXDESC_DC ((uint32_t)0x08000000U) /*!< Disable CRC */
+#define ETH_DMATXDESC_DP ((uint32_t)0x04000000U) /*!< Disable Padding */
+#define ETH_DMATXDESC_TTSE ((uint32_t)0x02000000U) /*!< Transmit Time Stamp Enable */
+#define ETH_DMATXDESC_CIC ((uint32_t)0x00C00000U) /*!< Checksum Insertion Control: 4 cases */
+#define ETH_DMATXDESC_CIC_BYPASS ((uint32_t)0x00000000U) /*!< Do Nothing: Checksum Engine is bypassed */
+#define ETH_DMATXDESC_CIC_IPV4HEADER ((uint32_t)0x00400000U) /*!< IPV4 header Checksum Insertion */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT ((uint32_t)0x00800000U) /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL ((uint32_t)0x00C00000U) /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */
+#define ETH_DMATXDESC_TER ((uint32_t)0x00200000U) /*!< Transmit End of Ring */
+#define ETH_DMATXDESC_TCH ((uint32_t)0x00100000U) /*!< Second Address Chained */
+#define ETH_DMATXDESC_TTSS ((uint32_t)0x00020000U) /*!< Tx Time Stamp Status */
+#define ETH_DMATXDESC_IHE ((uint32_t)0x00010000U) /*!< IP Header Error */
+#define ETH_DMATXDESC_ES ((uint32_t)0x00008000U) /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */
+#define ETH_DMATXDESC_JT ((uint32_t)0x00004000U) /*!< Jabber Timeout */
+#define ETH_DMATXDESC_FF ((uint32_t)0x00002000U) /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */
+#define ETH_DMATXDESC_PCE ((uint32_t)0x00001000U) /*!< Payload Checksum Error */
+#define ETH_DMATXDESC_LCA ((uint32_t)0x00000800U) /*!< Loss of Carrier: carrier lost during transmission */
+#define ETH_DMATXDESC_NC ((uint32_t)0x00000400U) /*!< No Carrier: no carrier signal from the transceiver */
+#define ETH_DMATXDESC_LCO ((uint32_t)0x00000200U) /*!< Late Collision: transmission aborted due to collision */
+#define ETH_DMATXDESC_EC ((uint32_t)0x00000100U) /*!< Excessive Collision: transmission aborted after 16 collisions */
+#define ETH_DMATXDESC_VF ((uint32_t)0x00000080U) /*!< VLAN Frame */
+#define ETH_DMATXDESC_CC ((uint32_t)0x00000078U) /*!< Collision Count */
+#define ETH_DMATXDESC_ED ((uint32_t)0x00000004U) /*!< Excessive Deferral */
+#define ETH_DMATXDESC_UF ((uint32_t)0x00000002U) /*!< Underflow Error: late data arrival from the memory */
+#define ETH_DMATXDESC_DB ((uint32_t)0x00000001U) /*!< Deferred Bit */
+
+/**
+ * @brief Bit definition of TDES1 register
+ */
+#define ETH_DMATXDESC_TBS2 ((uint32_t)0x1FFF0000U) /*!< Transmit Buffer2 Size */
+#define ETH_DMATXDESC_TBS1 ((uint32_t)0x00001FFFU) /*!< Transmit Buffer1 Size */
+
+/**
+ * @brief Bit definition of TDES2 register
+ */
+#define ETH_DMATXDESC_B1AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of TDES3 register
+ */
+#define ETH_DMATXDESC_B2AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer2 Address Pointer */
+
+ /*---------------------------------------------------------------------------------------------
+ TDES6 | Transmit Time Stamp Low [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES7 | Transmit Time Stamp High [31:0] |
+ ----------------------------------------------------------------------------------------------*/
+
+/* Bit definition of TDES6 register */
+ #define ETH_DMAPTPTXDESC_TTSL ((uint32_t)0xFFFFFFFFU) /* Transmit Time Stamp Low */
+
+/* Bit definition of TDES7 register */
+ #define ETH_DMAPTPTXDESC_TTSH ((uint32_t)0xFFFFFFFFU) /* Transmit Time Stamp High */
+
+/**
+ * @}
+ */
+/** @defgroup ETH_DMA_RX_Descriptor ETH DMA RX Descriptor
+ * @{
+ */
+
+/*
+ DMA Rx Descriptor
+ --------------------------------------------------------------------------------------------------------------------
+ RDES0 | OWN(31) | Status [30:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES2 | Buffer1 Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of RDES0 register: DMA Rx descriptor status register
+ */
+#define ETH_DMARXDESC_OWN ((uint32_t)0x80000000U) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMARXDESC_AFM ((uint32_t)0x40000000U) /*!< DA Filter Fail for the rx frame */
+#define ETH_DMARXDESC_FL ((uint32_t)0x3FFF0000U) /*!< Receive descriptor frame length */
+#define ETH_DMARXDESC_ES ((uint32_t)0x00008000U) /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */
+#define ETH_DMARXDESC_DE ((uint32_t)0x00004000U) /*!< Descriptor error: no more descriptors for receive frame */
+#define ETH_DMARXDESC_SAF ((uint32_t)0x00002000U) /*!< SA Filter Fail for the received frame */
+#define ETH_DMARXDESC_LE ((uint32_t)0x00001000U) /*!< Frame size not matching with length field */
+#define ETH_DMARXDESC_OE ((uint32_t)0x00000800U) /*!< Overflow Error: Frame was damaged due to buffer overflow */
+#define ETH_DMARXDESC_VLAN ((uint32_t)0x00000400U) /*!< VLAN Tag: received frame is a VLAN frame */
+#define ETH_DMARXDESC_FS ((uint32_t)0x00000200U) /*!< First descriptor of the frame */
+#define ETH_DMARXDESC_LS ((uint32_t)0x00000100U) /*!< Last descriptor of the frame */
+#define ETH_DMARXDESC_IPV4HCE ((uint32_t)0x00000080U) /*!< IPC Checksum Error: Rx Ipv4 header checksum error */
+#define ETH_DMARXDESC_LC ((uint32_t)0x00000040U) /*!< Late collision occurred during reception */
+#define ETH_DMARXDESC_FT ((uint32_t)0x00000020U) /*!< Frame type - Ethernet, otherwise 802.3 */
+#define ETH_DMARXDESC_RWT ((uint32_t)0x00000010U) /*!< Receive Watchdog Timeout: watchdog timer expired during reception */
+#define ETH_DMARXDESC_RE ((uint32_t)0x00000008U) /*!< Receive error: error reported by MII interface */
+#define ETH_DMARXDESC_DBE ((uint32_t)0x00000004U) /*!< Dribble bit error: frame contains non int multiple of 8 bits */
+#define ETH_DMARXDESC_CE ((uint32_t)0x00000002U) /*!< CRC error */
+#define ETH_DMARXDESC_MAMPCE ((uint32_t)0x00000001U) /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */
+
+/**
+ * @brief Bit definition of RDES1 register
+ */
+#define ETH_DMARXDESC_DIC ((uint32_t)0x80000000U) /*!< Disable Interrupt on Completion */
+#define ETH_DMARXDESC_RBS2 ((uint32_t)0x1FFF0000U) /*!< Receive Buffer2 Size */
+#define ETH_DMARXDESC_RER ((uint32_t)0x00008000U) /*!< Receive End of Ring */
+#define ETH_DMARXDESC_RCH ((uint32_t)0x00004000U) /*!< Second Address Chained */
+#define ETH_DMARXDESC_RBS1 ((uint32_t)0x00001FFFU) /*!< Receive Buffer1 Size */
+
+/**
+ * @brief Bit definition of RDES2 register
+ */
+#define ETH_DMARXDESC_B1AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of RDES3 register
+ */
+#define ETH_DMARXDESC_B2AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer2 Address Pointer */
+
+/*---------------------------------------------------------------------------------------------------------------------
+ RDES4 | Reserved[31:15] | Extended Status [14:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES5 | Reserved[31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES6 | Receive Time Stamp Low [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES7 | Receive Time Stamp High [31:0] |
+ --------------------------------------------------------------------------------------------------------------------*/
+
+/* Bit definition of RDES4 register */
+#define ETH_DMAPTPRXDESC_PTPV ((uint32_t)0x00002000U) /* PTP Version */
+#define ETH_DMAPTPRXDESC_PTPFT ((uint32_t)0x00001000U) /* PTP Frame Type */
+#define ETH_DMAPTPRXDESC_PTPMT ((uint32_t)0x00000F00U) /* PTP Message Type */
+ #define ETH_DMAPTPRXDESC_PTPMT_SYNC ((uint32_t)0x00000100U) /* SYNC message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP ((uint32_t)0x00000200U) /* FollowUp message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ ((uint32_t)0x00000300U) /* DelayReq message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP ((uint32_t)0x00000400U) /* DelayResp message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE ((uint32_t)0x00000500U) /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG ((uint32_t)0x00000600U) /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL ((uint32_t)0x00000700U) /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_IPV6PR ((uint32_t)0x00000080U) /* IPv6 Packet Received */
+#define ETH_DMAPTPRXDESC_IPV4PR ((uint32_t)0x00000040U) /* IPv4 Packet Received */
+#define ETH_DMAPTPRXDESC_IPCB ((uint32_t)0x00000020U) /* IP Checksum Bypassed */
+#define ETH_DMAPTPRXDESC_IPPE ((uint32_t)0x00000010U) /* IP Payload Error */
+#define ETH_DMAPTPRXDESC_IPHE ((uint32_t)0x00000008U) /* IP Header Error */
+#define ETH_DMAPTPRXDESC_IPPT ((uint32_t)0x00000007U) /* IP Payload Type */
+ #define ETH_DMAPTPRXDESC_IPPT_UDP ((uint32_t)0x00000001U) /* UDP payload encapsulated in the IP datagram */
+ #define ETH_DMAPTPRXDESC_IPPT_TCP ((uint32_t)0x00000002U) /* TCP payload encapsulated in the IP datagram */
+ #define ETH_DMAPTPRXDESC_IPPT_ICMP ((uint32_t)0x00000003U) /* ICMP payload encapsulated in the IP datagram */
+
+/* Bit definition of RDES6 register */
+#define ETH_DMAPTPRXDESC_RTSL ((uint32_t)0xFFFFFFFFU) /* Receive Time Stamp Low */
+
+/* Bit definition of RDES7 register */
+#define ETH_DMAPTPRXDESC_RTSH ((uint32_t)0xFFFFFFFFU) /* Receive Time Stamp High */
+/**
+ * @}
+ */
+ /** @defgroup ETH_AutoNegotiation ETH AutoNegotiation
+ * @{
+ */
+#define ETH_AUTONEGOTIATION_ENABLE ((uint32_t)0x00000001U)
+#define ETH_AUTONEGOTIATION_DISABLE ((uint32_t)0x00000000U)
+
+/**
+ * @}
+ */
+/** @defgroup ETH_Speed ETH Speed
+ * @{
+ */
+#define ETH_SPEED_10M ((uint32_t)0x00000000U)
+#define ETH_SPEED_100M ((uint32_t)0x00004000U)
+
+/**
+ * @}
+ */
+/** @defgroup ETH_Duplex_Mode ETH Duplex Mode
+ * @{
+ */
+#define ETH_MODE_FULLDUPLEX ((uint32_t)0x00000800U)
+#define ETH_MODE_HALFDUPLEX ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+/** @defgroup ETH_Rx_Mode ETH Rx Mode
+ * @{
+ */
+#define ETH_RXPOLLING_MODE ((uint32_t)0x00000000U)
+#define ETH_RXINTERRUPT_MODE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Mode ETH Checksum Mode
+ * @{
+ */
+#define ETH_CHECKSUM_BY_HARDWARE ((uint32_t)0x00000000U)
+#define ETH_CHECKSUM_BY_SOFTWARE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Media_Interface ETH Media Interface
+ * @{
+ */
+#define ETH_MEDIA_INTERFACE_MII ((uint32_t)0x00000000U)
+#define ETH_MEDIA_INTERFACE_RMII ((uint32_t)SYSCFG_PMC_MII_RMII_SEL)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Watchdog ETH Watchdog
+ * @{
+ */
+#define ETH_WATCHDOG_ENABLE ((uint32_t)0x00000000U)
+#define ETH_WATCHDOG_DISABLE ((uint32_t)0x00800000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Jabber ETH Jabber
+ * @{
+ */
+#define ETH_JABBER_ENABLE ((uint32_t)0x00000000U)
+#define ETH_JABBER_DISABLE ((uint32_t)0x00400000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Inter_Frame_Gap ETH Inter Frame Gap
+ * @{
+ */
+#define ETH_INTERFRAMEGAP_96BIT ((uint32_t)0x00000000U) /*!< minimum IFG between frames during transmission is 96Bit */
+#define ETH_INTERFRAMEGAP_88BIT ((uint32_t)0x00020000U) /*!< minimum IFG between frames during transmission is 88Bit */
+#define ETH_INTERFRAMEGAP_80BIT ((uint32_t)0x00040000U) /*!< minimum IFG between frames during transmission is 80Bit */
+#define ETH_INTERFRAMEGAP_72BIT ((uint32_t)0x00060000U) /*!< minimum IFG between frames during transmission is 72Bit */
+#define ETH_INTERFRAMEGAP_64BIT ((uint32_t)0x00080000U) /*!< minimum IFG between frames during transmission is 64Bit */
+#define ETH_INTERFRAMEGAP_56BIT ((uint32_t)0x000A0000U) /*!< minimum IFG between frames during transmission is 56Bit */
+#define ETH_INTERFRAMEGAP_48BIT ((uint32_t)0x000C0000U) /*!< minimum IFG between frames during transmission is 48Bit */
+#define ETH_INTERFRAMEGAP_40BIT ((uint32_t)0x000E0000U) /*!< minimum IFG between frames during transmission is 40Bit */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Carrier_Sense ETH Carrier Sense
+ * @{
+ */
+#define ETH_CARRIERSENCE_ENABLE ((uint32_t)0x00000000U)
+#define ETH_CARRIERSENCE_DISABLE ((uint32_t)0x00010000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Own ETH Receive Own
+ * @{
+ */
+#define ETH_RECEIVEOWN_ENABLE ((uint32_t)0x00000000U)
+#define ETH_RECEIVEOWN_DISABLE ((uint32_t)0x00002000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Loop_Back_Mode ETH Loop Back Mode
+ * @{
+ */
+#define ETH_LOOPBACKMODE_ENABLE ((uint32_t)0x00001000U)
+#define ETH_LOOPBACKMODE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Offload ETH Checksum Offload
+ * @{
+ */
+#define ETH_CHECKSUMOFFLAOD_ENABLE ((uint32_t)0x00000400U)
+#define ETH_CHECKSUMOFFLAOD_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Retry_Transmission ETH Retry Transmission
+ * @{
+ */
+#define ETH_RETRYTRANSMISSION_ENABLE ((uint32_t)0x00000000U)
+#define ETH_RETRYTRANSMISSION_DISABLE ((uint32_t)0x00000200U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Automatic_Pad_CRC_Strip ETH Automatic Pad CRC Strip
+ * @{
+ */
+#define ETH_AUTOMATICPADCRCSTRIP_ENABLE ((uint32_t)0x00000080U)
+#define ETH_AUTOMATICPADCRCSTRIP_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Back_Off_Limit ETH Back Off Limit
+ * @{
+ */
+#define ETH_BACKOFFLIMIT_10 ((uint32_t)0x00000000U)
+#define ETH_BACKOFFLIMIT_8 ((uint32_t)0x00000020U)
+#define ETH_BACKOFFLIMIT_4 ((uint32_t)0x00000040U)
+#define ETH_BACKOFFLIMIT_1 ((uint32_t)0x00000060U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Deferral_Check ETH Deferral Check
+ * @{
+ */
+#define ETH_DEFFERRALCHECK_ENABLE ((uint32_t)0x00000010U)
+#define ETH_DEFFERRALCHECK_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_All ETH Receive All
+ * @{
+ */
+#define ETH_RECEIVEALL_ENABLE ((uint32_t)0x80000000U)
+#define ETH_RECEIVEAll_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Source_Addr_Filter ETH Source Addr Filter
+ * @{
+ */
+#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE ((uint32_t)0x00000200U)
+#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE ((uint32_t)0x00000300U)
+#define ETH_SOURCEADDRFILTER_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pass_Control_Frames ETH Pass Control Frames
+ * @{
+ */
+#define ETH_PASSCONTROLFRAMES_BLOCKALL ((uint32_t)0x00000040U) /*!< MAC filters all control frames from reaching the application */
+#define ETH_PASSCONTROLFRAMES_FORWARDALL ((uint32_t)0x00000080U) /*!< MAC forwards all control frames to application even if they fail the Address Filter */
+#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER ((uint32_t)0x000000C0U) /*!< MAC forwards control frames that pass the Address Filter. */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Broadcast_Frames_Reception ETH Broadcast Frames Reception
+ * @{
+ */
+#define ETH_BROADCASTFRAMESRECEPTION_ENABLE ((uint32_t)0x00000000U)
+#define ETH_BROADCASTFRAMESRECEPTION_DISABLE ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Destination_Addr_Filter ETH Destination Addr Filter
+ * @{
+ */
+#define ETH_DESTINATIONADDRFILTER_NORMAL ((uint32_t)0x00000000U)
+#define ETH_DESTINATIONADDRFILTER_INVERSE ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Promiscuous_Mode ETH Promiscuous Mode
+ * @{
+ */
+#define ETH_PROMISCUOUS_MODE_ENABLE ((uint32_t)0x00000001U)
+#define ETH_PROMISCUOUS_MODE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Multicast_Frames_Filter ETH Multicast Frames Filter
+ * @{
+ */
+#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000404U)
+#define ETH_MULTICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000004U)
+#define ETH_MULTICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000U)
+#define ETH_MULTICASTFRAMESFILTER_NONE ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Frames_Filter ETH Unicast Frames Filter
+ * @{
+ */
+#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000402U)
+#define ETH_UNICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000002U)
+#define ETH_UNICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Zero_Quanta_Pause ETH Zero Quanta Pause
+ * @{
+ */
+#define ETH_ZEROQUANTAPAUSE_ENABLE ((uint32_t)0x00000000U)
+#define ETH_ZEROQUANTAPAUSE_DISABLE ((uint32_t)0x00000080U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pause_Low_Threshold ETH Pause Low Threshold
+ * @{
+ */
+#define ETH_PAUSELOWTHRESHOLD_MINUS4 ((uint32_t)0x00000000U) /*!< Pause time minus 4 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS28 ((uint32_t)0x00000010U) /*!< Pause time minus 28 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS144 ((uint32_t)0x00000020U) /*!< Pause time minus 144 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS256 ((uint32_t)0x00000030U) /*!< Pause time minus 256 slot times */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Pause_Frame_Detect ETH Unicast Pause Frame Detect
+ * @{
+ */
+#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE ((uint32_t)0x00000008U)
+#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Flow_Control ETH Receive Flow Control
+ * @{
+ */
+#define ETH_RECEIVEFLOWCONTROL_ENABLE ((uint32_t)0x00000004U)
+#define ETH_RECEIVEFLOWCONTROL_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Flow_Control ETH Transmit Flow Control
+ * @{
+ */
+#define ETH_TRANSMITFLOWCONTROL_ENABLE ((uint32_t)0x00000002U)
+#define ETH_TRANSMITFLOWCONTROL_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_VLAN_Tag_Comparison ETH VLAN Tag Comparison
+ * @{
+ */
+#define ETH_VLANTAGCOMPARISON_12BIT ((uint32_t)0x00010000U)
+#define ETH_VLANTAGCOMPARISON_16BIT ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses ETH MAC addresses
+ * @{
+ */
+#define ETH_MAC_ADDRESS0 ((uint32_t)0x00000000U)
+#define ETH_MAC_ADDRESS1 ((uint32_t)0x00000008U)
+#define ETH_MAC_ADDRESS2 ((uint32_t)0x00000010U)
+#define ETH_MAC_ADDRESS3 ((uint32_t)0x00000018U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_SA_DA ETH MAC addresses filter SA DA
+ * @{
+ */
+#define ETH_MAC_ADDRESSFILTER_SA ((uint32_t)0x00000000U)
+#define ETH_MAC_ADDRESSFILTER_DA ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_Mask_bytes ETH MAC addresses filter Mask bytes
+ * @{
+ */
+#define ETH_MAC_ADDRESSMASK_BYTE6 ((uint32_t)0x20000000U) /*!< Mask MAC Address high reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE5 ((uint32_t)0x10000000U) /*!< Mask MAC Address high reg bits [7:0] */
+#define ETH_MAC_ADDRESSMASK_BYTE4 ((uint32_t)0x08000000U) /*!< Mask MAC Address low reg bits [31:24] */
+#define ETH_MAC_ADDRESSMASK_BYTE3 ((uint32_t)0x04000000U) /*!< Mask MAC Address low reg bits [23:16] */
+#define ETH_MAC_ADDRESSMASK_BYTE2 ((uint32_t)0x02000000U) /*!< Mask MAC Address low reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE1 ((uint32_t)0x01000000U) /*!< Mask MAC Address low reg bits [70] */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame ETH Drop TCP IP Checksum Error Frame
+ * @{
+ */
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE ((uint32_t)0x00000000U)
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE ((uint32_t)0x04000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Store_Forward ETH Receive Store Forward
+ * @{
+ */
+#define ETH_RECEIVESTOREFORWARD_ENABLE ((uint32_t)0x02000000U)
+#define ETH_RECEIVESTOREFORWARD_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Flush_Received_Frame ETH Flush Received Frame
+ * @{
+ */
+#define ETH_FLUSHRECEIVEDFRAME_ENABLE ((uint32_t)0x00000000U)
+#define ETH_FLUSHRECEIVEDFRAME_DISABLE ((uint32_t)0x01000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Store_Forward ETH Transmit Store Forward
+ * @{
+ */
+#define ETH_TRANSMITSTOREFORWARD_ENABLE ((uint32_t)0x00200000U)
+#define ETH_TRANSMITSTOREFORWARD_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Threshold_Control ETH Transmit Threshold Control
+ * @{
+ */
+#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000U) /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00004000U) /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES ((uint32_t)0x00008000U) /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES ((uint32_t)0x0000C000U) /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES ((uint32_t)0x00010000U) /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00014000U) /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES ((uint32_t)0x00018000U) /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES ((uint32_t)0x0001C000U) /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Error_Frames ETH Forward Error Frames
+ * @{
+ */
+#define ETH_FORWARDERRORFRAMES_ENABLE ((uint32_t)0x00000080U)
+#define ETH_FORWARDERRORFRAMES_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Undersized_Good_Frames ETH Forward Undersized Good Frames
+ * @{
+ */
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE ((uint32_t)0x00000040U)
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Threshold_Control ETH Receive Threshold Control
+ * @{
+ */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000U) /*!< threshold level of the MTL Receive FIFO is 64 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00000008U) /*!< threshold level of the MTL Receive FIFO is 32 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES ((uint32_t)0x00000010U) /*!< threshold level of the MTL Receive FIFO is 96 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00000018U) /*!< threshold level of the MTL Receive FIFO is 128 Bytes */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Second_Frame_Operate ETH Second Frame Operate
+ * @{
+ */
+#define ETH_SECONDFRAMEOPERARTE_ENABLE ((uint32_t)0x00000004U)
+#define ETH_SECONDFRAMEOPERARTE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Address_Aligned_Beats ETH Address Aligned Beats
+ * @{
+ */
+#define ETH_ADDRESSALIGNEDBEATS_ENABLE ((uint32_t)0x02000000U)
+#define ETH_ADDRESSALIGNEDBEATS_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Fixed_Burst ETH Fixed Burst
+ * @{
+ */
+#define ETH_FIXEDBURST_ENABLE ((uint32_t)0x00010000U)
+#define ETH_FIXEDBURST_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Rx_DMA_Burst_Length ETH Rx DMA Burst Length
+ * @{
+ */
+#define ETH_RXDMABURSTLENGTH_1BEAT ((uint32_t)0x00020000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */
+#define ETH_RXDMABURSTLENGTH_2BEAT ((uint32_t)0x00040000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */
+#define ETH_RXDMABURSTLENGTH_4BEAT ((uint32_t)0x00080000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_8BEAT ((uint32_t)0x00100000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_16BEAT ((uint32_t)0x00200000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_32BEAT ((uint32_t)0x00400000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01020000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01040000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01080000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01100000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01200000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01400000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Tx_DMA_Burst_Length ETH Tx DMA Burst Length
+ * @{
+ */
+#define ETH_TXDMABURSTLENGTH_1BEAT ((uint32_t)0x00000100U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+#define ETH_TXDMABURSTLENGTH_2BEAT ((uint32_t)0x00000200U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+#define ETH_TXDMABURSTLENGTH_4BEAT ((uint32_t)0x00000400U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_8BEAT ((uint32_t)0x00000800U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_16BEAT ((uint32_t)0x00001000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_32BEAT ((uint32_t)0x00002000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01000100U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01000200U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01000400U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01000800U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01001000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01002000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Enhanced_descriptor_format ETH DMA Enhanced descriptor format
+ * @{
+ */
+#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE ((uint32_t)0x00000080U)
+#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Arbitration ETH DMA Arbitration
+ * @{
+ */
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1 ((uint32_t)0x00000000U)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1 ((uint32_t)0x00004000U)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1 ((uint32_t)0x00008000U)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1 ((uint32_t)0x0000C000U)
+#define ETH_DMAARBITRATION_RXPRIORTX ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_segment ETH DMA Tx descriptor segment
+ * @{
+ */
+#define ETH_DMATXDESC_LASTSEGMENTS ((uint32_t)0x40000000U) /*!< Last Segment */
+#define ETH_DMATXDESC_FIRSTSEGMENT ((uint32_t)0x20000000U) /*!< First Segment */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control ETH DMA Tx descriptor Checksum Insertion Control
+ * @{
+ */
+#define ETH_DMATXDESC_CHECKSUMBYPASS ((uint32_t)0x00000000U) /*!< Checksum engine bypass */
+#define ETH_DMATXDESC_CHECKSUMIPV4HEADER ((uint32_t)0x00400000U) /*!< IPv4 header checksum insertion */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT ((uint32_t)0x00800000U) /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL ((uint32_t)0x00C00000U) /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Rx_descriptor_buffers ETH DMA Rx descriptor buffers
+ * @{
+ */
+#define ETH_DMARXDESC_BUFFER1 ((uint32_t)0x00000000U) /*!< DMA Rx Desc Buffer1 */
+#define ETH_DMARXDESC_BUFFER2 ((uint32_t)0x00000001U) /*!< DMA Rx Desc Buffer2 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_PMT_Flags ETH PMT Flags
+ * @{
+ */
+#define ETH_PMT_FLAG_WUFFRPR ((uint32_t)0x80000000U) /*!< Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_PMT_FLAG_WUFR ((uint32_t)0x00000040U) /*!< Wake-Up Frame Received */
+#define ETH_PMT_FLAG_MPR ((uint32_t)0x00000020U) /*!< Magic Packet Received */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Tx_Interrupts ETH MMC Tx Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_TGF ((uint32_t)0x00200000U) /*!< When Tx good frame counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFMSC ((uint32_t)0x00008000U) /*!< When Tx good multi col counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFSC ((uint32_t)0x00004000U) /*!< When Tx good single col counter reaches half the maximum value */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Rx_Interrupts ETH MMC Rx Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_RGUF ((uint32_t)0x10020000U) /*!< When Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMC_IT_RFAE ((uint32_t)0x10000040U) /*!< When Rx alignment error counter reaches half the maximum value */
+#define ETH_MMC_IT_RFCE ((uint32_t)0x10000020U) /*!< When Rx crc error counter reaches half the maximum value */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Flags ETH MAC Flags
+ * @{
+ */
+#define ETH_MAC_FLAG_TST ((uint32_t)0x00000200U) /*!< Time stamp trigger flag (on MAC) */
+#define ETH_MAC_FLAG_MMCT ((uint32_t)0x00000040U) /*!< MMC transmit flag */
+#define ETH_MAC_FLAG_MMCR ((uint32_t)0x00000020U) /*!< MMC receive flag */
+#define ETH_MAC_FLAG_MMC ((uint32_t)0x00000010U) /*!< MMC flag (on MAC) */
+#define ETH_MAC_FLAG_PMT ((uint32_t)0x00000008U) /*!< PMT flag (on MAC) */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Flags ETH DMA Flags
+ * @{
+ */
+#define ETH_DMA_FLAG_TST ((uint32_t)0x20000000U) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_FLAG_PMT ((uint32_t)0x10000000U) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_FLAG_MMC ((uint32_t)0x08000000U) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_FLAG_DATATRANSFERERROR ((uint32_t)0x00800000U) /*!< Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMA_FLAG_READWRITEERROR ((uint32_t)0x01000000U) /*!< Error bits 0-write transfer, 1-read transfer */
+#define ETH_DMA_FLAG_ACCESSERROR ((uint32_t)0x02000000U) /*!< Error bits 0-data buffer, 1-desc. access */
+#define ETH_DMA_FLAG_NIS ((uint32_t)0x00010000U) /*!< Normal interrupt summary flag */
+#define ETH_DMA_FLAG_AIS ((uint32_t)0x00008000U) /*!< Abnormal interrupt summary flag */
+#define ETH_DMA_FLAG_ER ((uint32_t)0x00004000U) /*!< Early receive flag */
+#define ETH_DMA_FLAG_FBE ((uint32_t)0x00002000U) /*!< Fatal bus error flag */
+#define ETH_DMA_FLAG_ET ((uint32_t)0x00000400U) /*!< Early transmit flag */
+#define ETH_DMA_FLAG_RWT ((uint32_t)0x00000200U) /*!< Receive watchdog timeout flag */
+#define ETH_DMA_FLAG_RPS ((uint32_t)0x00000100U) /*!< Receive process stopped flag */
+#define ETH_DMA_FLAG_RBU ((uint32_t)0x00000080U) /*!< Receive buffer unavailable flag */
+#define ETH_DMA_FLAG_R ((uint32_t)0x00000040U) /*!< Receive flag */
+#define ETH_DMA_FLAG_TU ((uint32_t)0x00000020U) /*!< Underflow flag */
+#define ETH_DMA_FLAG_RO ((uint32_t)0x00000010U) /*!< Overflow flag */
+#define ETH_DMA_FLAG_TJT ((uint32_t)0x00000008U) /*!< Transmit jabber timeout flag */
+#define ETH_DMA_FLAG_TBU ((uint32_t)0x00000004U) /*!< Transmit buffer unavailable flag */
+#define ETH_DMA_FLAG_TPS ((uint32_t)0x00000002U) /*!< Transmit process stopped flag */
+#define ETH_DMA_FLAG_T ((uint32_t)0x00000001U) /*!< Transmit flag */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Interrupts ETH MAC Interrupts
+ * @{
+ */
+#define ETH_MAC_IT_TST ((uint32_t)0x00000200U) /*!< Time stamp trigger interrupt (on MAC) */
+#define ETH_MAC_IT_MMCT ((uint32_t)0x00000040U) /*!< MMC transmit interrupt */
+#define ETH_MAC_IT_MMCR ((uint32_t)0x00000020U) /*!< MMC receive interrupt */
+#define ETH_MAC_IT_MMC ((uint32_t)0x00000010U) /*!< MMC interrupt (on MAC) */
+#define ETH_MAC_IT_PMT ((uint32_t)0x00000008U) /*!< PMT interrupt (on MAC) */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Interrupts ETH DMA Interrupts
+ * @{
+ */
+#define ETH_DMA_IT_TST ((uint32_t)0x20000000U) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_IT_PMT ((uint32_t)0x10000000U) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_IT_MMC ((uint32_t)0x08000000U) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_IT_NIS ((uint32_t)0x00010000U) /*!< Normal interrupt summary */
+#define ETH_DMA_IT_AIS ((uint32_t)0x00008000U) /*!< Abnormal interrupt summary */
+#define ETH_DMA_IT_ER ((uint32_t)0x00004000U) /*!< Early receive interrupt */
+#define ETH_DMA_IT_FBE ((uint32_t)0x00002000U) /*!< Fatal bus error interrupt */
+#define ETH_DMA_IT_ET ((uint32_t)0x00000400U) /*!< Early transmit interrupt */
+#define ETH_DMA_IT_RWT ((uint32_t)0x00000200U) /*!< Receive watchdog timeout interrupt */
+#define ETH_DMA_IT_RPS ((uint32_t)0x00000100U) /*!< Receive process stopped interrupt */
+#define ETH_DMA_IT_RBU ((uint32_t)0x00000080U) /*!< Receive buffer unavailable interrupt */
+#define ETH_DMA_IT_R ((uint32_t)0x00000040U) /*!< Receive interrupt */
+#define ETH_DMA_IT_TU ((uint32_t)0x00000020U) /*!< Underflow interrupt */
+#define ETH_DMA_IT_RO ((uint32_t)0x00000010U) /*!< Overflow interrupt */
+#define ETH_DMA_IT_TJT ((uint32_t)0x00000008U) /*!< Transmit jabber timeout interrupt */
+#define ETH_DMA_IT_TBU ((uint32_t)0x00000004U) /*!< Transmit buffer unavailable interrupt */
+#define ETH_DMA_IT_TPS ((uint32_t)0x00000002U) /*!< Transmit process stopped interrupt */
+#define ETH_DMA_IT_T ((uint32_t)0x00000001U) /*!< Transmit interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_transmit_process_state ETH DMA transmit process state
+ * @{
+ */
+#define ETH_DMA_TRANSMITPROCESS_STOPPED ((uint32_t)0x00000000U) /*!< Stopped - Reset or Stop Tx Command issued */
+#define ETH_DMA_TRANSMITPROCESS_FETCHING ((uint32_t)0x00100000U) /*!< Running - fetching the Tx descriptor */
+#define ETH_DMA_TRANSMITPROCESS_WAITING ((uint32_t)0x00200000U) /*!< Running - waiting for status */
+#define ETH_DMA_TRANSMITPROCESS_READING ((uint32_t)0x00300000U) /*!< Running - reading the data from host memory */
+#define ETH_DMA_TRANSMITPROCESS_SUSPENDED ((uint32_t)0x00600000U) /*!< Suspended - Tx Descriptor unavailable */
+#define ETH_DMA_TRANSMITPROCESS_CLOSING ((uint32_t)0x00700000U) /*!< Running - closing Rx descriptor */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ETH_DMA_receive_process_state ETH DMA receive process state
+ * @{
+ */
+#define ETH_DMA_RECEIVEPROCESS_STOPPED ((uint32_t)0x00000000U) /*!< Stopped - Reset or Stop Rx Command issued */
+#define ETH_DMA_RECEIVEPROCESS_FETCHING ((uint32_t)0x00020000U) /*!< Running - fetching the Rx descriptor */
+#define ETH_DMA_RECEIVEPROCESS_WAITING ((uint32_t)0x00060000U) /*!< Running - waiting for packet */
+#define ETH_DMA_RECEIVEPROCESS_SUSPENDED ((uint32_t)0x00080000U) /*!< Suspended - Rx Descriptor unavailable */
+#define ETH_DMA_RECEIVEPROCESS_CLOSING ((uint32_t)0x000A0000U) /*!< Running - closing descriptor */
+#define ETH_DMA_RECEIVEPROCESS_QUEUING ((uint32_t)0x000E0000U) /*!< Running - queuing the receive frame into host memory */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_overflow ETH DMA overflow
+ * @{
+ */
+#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER ((uint32_t)0x10000000U) /*!< Overflow bit for FIFO overflow counter */
+#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER ((uint32_t)0x00010000U) /*!< Overflow bit for missed frame counter */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_EXTI_LINE_WAKEUP ETH EXTI LINE WAKEUP
+ * @{
+ */
+#define ETH_EXTI_LINE_WAKEUP ((uint32_t)0x00080000U) /*!< External interrupt line 19 Connected to the ETH EXTI Line */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Macros ETH Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/** @brief Reset ETH handle state
+ * @param __HANDLE__: specifies the ETH handle.
+ * @retval None
+ */
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA Tx Desc flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag of TDES0 to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA Rx Desc flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag of RDES0 to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC))
+
+/**
+ * @brief Disables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC)
+
+/**
+ * @brief Set the specified DMA Rx Desc Own bit.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN)
+
+/**
+ * @brief Returns the specified ETHERNET DMA Tx Desc collision count.
+ * @param __HANDLE__: ETH Handle
+ * @retval The Transmit descriptor collision counter value.
+ */
+#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__) (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT)
+
+/**
+ * @brief Set the specified DMA Tx Desc Own bit.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN)
+
+/**
+ * @brief Enables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC)
+
+/**
+ * @brief Disables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC)
+
+/**
+ * @brief Selects the specified ETHERNET DMA Tx Desc Checksum Insertion.
+ * @param __HANDLE__: ETH Handle
+ * @param __CHECKSUM__: specifies is the DMA Tx desc checksum insertion.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass
+ * @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__) ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__))
+
+/**
+ * @brief Enables the DMA Tx Desc CRC.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC)
+
+/**
+ * @brief Disables the DMA Tx Desc CRC.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC)
+
+/**
+ * @brief Enables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP)
+
+/**
+ * @brief Disables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP)
+
+/**
+ * @brief Enables the specified ETHERNET MAC interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET MAC interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Initiate a Pause Control Frame (Full-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the ETHERNET flow control busy bit is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @retval The new state of flow control busy status bit (SET or RESET).
+ */
+#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__) (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Enables the MAC Back Pressure operation activation (Half-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Disables the MAC BackPressure operation activation (Half-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the specified ETHERNET MAC flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_MAC_FLAG_TST : Time stamp trigger flag
+ * @arg ETH_MAC_FLAG_MMCT : MMC transmit flag
+ * @arg ETH_MAC_FLAG_MMCR : MMC receive flag
+ * @arg ETH_MAC_FLAG_MMC : MMC flag
+ * @arg ETH_MAC_FLAG_PMT : PMT flag
+ * @retval The state of ETHERNET MAC flag.
+ */
+#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Enables the specified ETHERNET DMA interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+ * enabled @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET DMA interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+ * disabled. @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Clears the ETHERNET DMA IT pending bit.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA flag is set or not.
+* @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to clear. @ref ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMASR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA overflow flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __OVERFLOW__: specifies the DMA overflow flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter
+ * @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter
+ * @retval The state of ETHERNET DMA overflow Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__) (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__))
+
+/**
+ * @brief Set the DMA Receive status watchdog timer register value
+ * @param __HANDLE__: ETH Handle
+ * @param __VALUE__: DMA Receive status watchdog timer register value
+ * @retval None
+ */
+#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__) ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__))
+
+/**
+ * @brief Enables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Disables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Enables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Disables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Magic Packet Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE)
+
+/**
+ * @brief Disables the MAC Magic Packet Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Power Down.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Disables the MAC Power Down.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Checks whether the specified ETHERNET PMT flag is set or not.
+ * @param __HANDLE__: ETH Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset
+ * @arg ETH_PMT_FLAG_WUFR : Wake-Up Frame Received
+ * @arg ETH_PMT_FLAG_MPR : Magic Packet Received
+ * @retval The new state of ETHERNET PMT Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16)
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16)
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__) do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\
+ (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0)
+
+/**
+ * @brief Enables the MMC Counter Freeze.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF)
+
+/**
+ * @brief Disables the MMC Counter Freeze.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF)
+
+/**
+ * @brief Enables the MMC Reset On Read.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR)
+
+/**
+ * @brief Disables the MMC Reset On Read.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR)
+
+/**
+ * @brief Enables the MMC Counter Stop Rollover.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR)
+
+/**
+ * @brief Disables the MMC Counter Stop Rollover.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR)
+
+/**
+ * @brief Resets the MMC Counters.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR)
+
+/**
+ * @brief Enables the specified ETHERNET MMC Rx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFFU)
+/**
+ * @brief Disables the specified ETHERNET MMC Rx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFFU)
+/**
+ * @brief Enables the specified ETHERNET MMC Tx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET MMC Tx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Enables the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enable event on ETH External event line.
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_EVENT() EXTI->EMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disable event on ETH External event line
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_EVENT() EXTI->EMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Get flag of the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Clear flag of the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables rising edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER() EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @brief Disables the rising edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_RISING_EDGE_TRIGGER() EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables rising/falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER() do{EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP;\
+ }while(0)
+
+/**
+ * @brief Disables rising/falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER() do{EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ }while(0)
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT() EXTI->SWIER|= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup ETH_Exported_Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+
+/** @addtogroup ETH_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount);
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
+
+/**
+ * @}
+ */
+/* IO operation functions ****************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength);
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth);
+/* Communication with PHY functions*/
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth);
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
+/* Callback in non blocking modes (Interrupt) */
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group3
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf);
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group4
+ * @{
+ */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx ||\
+ STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_ETH_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,775 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the internal FLASH memory:
+ * + Program operations functions
+ * + Memory Control functions
+ * + Peripheral Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FLASH peripheral features #####
+ ==============================================================================
+
+ [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
+ to the Flash memory. It implements the erase and program Flash memory operations
+ and the read and write protection mechanisms.
+
+ [..] The Flash memory interface accelerates code execution with a system of instruction
+ prefetch and cache lines.
+
+ [..] The FLASH main features are:
+ (+) Flash memory read operations
+ (+) Flash memory program/erase operations
+ (+) Read / write protections
+ (+) Prefetch on I-Code
+ (+) 64 cache lines of 128 bits on I-Code
+ (+) 8 cache lines of 128 bits on D-Code
+
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver provides functions and macros to configure and program the FLASH
+ memory of all STM32F4xx devices.
+
+ (#) FLASH Memory IO Programming functions:
+ (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
+ HAL_FLASH_Lock() functions
+ (++) Program functions: byte, half word, word and double word
+ (++) There Two modes of programming :
+ (+++) Polling mode using HAL_FLASH_Program() function
+ (+++) Interrupt mode using HAL_FLASH_Program_IT() function
+
+ (#) Interrupts and flags management functions :
+ (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
+ (++) Wait for last FLASH operation according to its status
+ (++) Get error flag status by calling HAL_SetErrorCode()
+
+ [..]
+ In addition to these functions, this driver includes a set of macros allowing
+ to handle the following operations:
+ (+) Set the latency
+ (+) Enable/Disable the prefetch buffer
+ (+) Enable/Disable the Instruction cache and the Data cache
+ (+) Reset the Instruction cache and the Data cache
+ (+) Enable/Disable the FLASH interrupts
+ (+) Monitor the FLASH flags status
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASH FLASH
+ * @brief FLASH HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Constants
+ * @{
+ */
+#define FLASH_TIMEOUT_VALUE ((uint32_t)50000U)/* 50 s */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Variables
+ * @{
+ */
+/* Variable used for Erase sectors under interruption */
+FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+/* Program operations */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data);
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data);
+static void FLASH_SetErrorCode(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
+ * @brief Programming operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Programming operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the FLASH
+ program operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Program byte, halfword, word or double word at a specified address
+ * @param TypeProgram: Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+ {
+ /*Program byte (8-bit) at a specified address.*/
+ FLASH_Program_Byte(Address, (uint8_t) Data);
+ }
+ else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+ {
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(Address, (uint16_t) Data);
+ }
+ else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+ {
+ /*Program word (32-bit) at a specified address.*/
+ FLASH_Program_Word(Address, (uint32_t) Data);
+ }
+ else
+ {
+ /*Program double word (64-bit) at a specified address.*/
+ FLASH_Program_DoubleWord(Address, Data);
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the program operation is completed, disable the PG Bit */
+ FLASH->CR &= (~FLASH_CR_PG);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled.
+ * @param TypeProgram: Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+ /* Enable End of FLASH Operation interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+
+ /* Enable Error source interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
+ pFlash.Address = Address;
+
+ if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+ {
+ /*Program byte (8-bit) at a specified address.*/
+ FLASH_Program_Byte(Address, (uint8_t) Data);
+ }
+ else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+ {
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(Address, (uint16_t) Data);
+ }
+ else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+ {
+ /*Program word (32-bit) at a specified address.*/
+ FLASH_Program_Word(Address, (uint32_t) Data);
+ }
+ else
+ {
+ /*Program double word (64-bit) at a specified address.*/
+ FLASH_Program_DoubleWord(Address, Data);
+ }
+
+ return status;
+}
+
+/**
+ * @brief This function handles FLASH interrupt request.
+ * @retval None
+ */
+void HAL_FLASH_IRQHandler(void)
+{
+ uint32_t addresstmp = 0U;
+
+ /* Check FLASH operation error flags */
+ if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+ FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
+ {
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+ {
+ /*return the faulty sector*/
+ addresstmp = pFlash.Sector;
+ pFlash.Sector = 0xFFFFFFFFU;
+ }
+ else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+ {
+ /*return the faulty bank*/
+ addresstmp = pFlash.Bank;
+ }
+ else
+ {
+ /*return the faulty address*/
+ addresstmp = pFlash.Address;
+ }
+
+ /*Save the Error code*/
+ FLASH_SetErrorCode();
+
+ /* FLASH error interrupt user callback */
+ HAL_FLASH_OperationErrorCallback(addresstmp);
+
+ /*Stop the procedure ongoing*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+
+ /* Check FLASH End of Operation flag */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+ {
+ /*Nb of sector to erased can be decreased*/
+ pFlash.NbSectorsToErase--;
+
+ /* Check if there are still sectors to erase*/
+ if(pFlash.NbSectorsToErase != 0U)
+ {
+ addresstmp = pFlash.Sector;
+ /*Indicate user which sector has been erased*/
+ HAL_FLASH_EndOfOperationCallback(addresstmp);
+
+ /*Increment sector number*/
+ pFlash.Sector++;
+ addresstmp = pFlash.Sector;
+ FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase);
+ }
+ else
+ {
+ /*No more sectors to Erase, user callback can be called.*/
+ /*Reset Sector and stop Erase sectors procedure*/
+ pFlash.Sector = addresstmp = 0xFFFFFFFFU;
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+
+ /* Flush the caches to be sure of the data consistency */
+ FLASH_FlushCaches() ;
+
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(addresstmp);
+ }
+ }
+ else
+ {
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+ {
+ /* MassErase ended. Return the selected bank */
+ /* Flush the caches to be sure of the data consistency */
+ FLASH_FlushCaches() ;
+
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(pFlash.Bank);
+ }
+ else
+ {
+ /*Program ended. Return the selected address*/
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+ }
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ }
+
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+ {
+ /* Operation is completed, disable the PG, SER, SNB and MER Bits */
+ CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT));
+
+ /* Disable End of FLASH Operation interrupt */
+ __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
+
+ /* Disable Error source interrupt */
+ __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ }
+}
+
+/**
+ * @brief FLASH end of operation interrupt callback
+ * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure
+ * Mass Erase: Bank number which has been requested to erase
+ * Sectors Erase: Sector which has been erased
+ * (if 0xFFFFFFFFU, it means that all the selected sectors have been erased)
+ * Program: Address which was selected for data program
+ * @retval None
+ */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FLASH operation error interrupt callback
+ * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure
+ * Mass Erase: Bank number which has been requested to erase
+ * Sectors Erase: Sector number which returned an error
+ * Program: Address which was selected for data program
+ * @retval None
+ */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the FLASH
+ memory operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Unlock the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+ if((FLASH->CR & FLASH_CR_LOCK) != RESET)
+ {
+ /* Authorize the FLASH Registers access */
+ FLASH->KEYR = FLASH_KEY1;
+ FLASH->KEYR = FLASH_KEY2;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Locks the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+ /* Set the LOCK Bit to lock the FLASH Registers access */
+ FLASH->CR |= FLASH_CR_LOCK;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Unlock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+ if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
+ {
+ /* Authorizes the Option Byte register programming */
+ FLASH->OPTKEYR = FLASH_OPT_KEY1;
+ FLASH->OPTKEYR = FLASH_OPT_KEY2;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Lock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+ /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
+ FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Launch the option byte loading.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+ /* Set the OPTSTRT bit in OPTCR register */
+ *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT;
+
+ /* Wait for last operation to be completed */
+ return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time Errors of the FLASH peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Get the specific FLASH error flag.
+ * @retval FLASH_ErrorCode: The returned value can be a combination of:
+ * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP)
+ * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag
+ * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag
+ * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag
+ * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag
+ * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag
+ */
+uint32_t HAL_FLASH_GetError(void)
+{
+ return pFlash.ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Wait for a FLASH operation to complete.
+ * @param Timeout: maximum flash operationtimeout
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Clear Error Code */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+ Even if the FLASH operation fails, the BUSY flag will be reset and an error
+ flag will be set */
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check FLASH End of Operation flag */
+ if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+ }
+
+ if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+ FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
+ {
+ /*Save the error code*/
+ FLASH_SetErrorCode();
+ return HAL_ERROR;
+ }
+
+ /* If there is no error flag set */
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Program a double word (64-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V and Vpp in the range 7V to 9V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+ FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint64_t*)Address = Data;
+}
+
+
+/**
+ * @brief Program word (32-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+ FLASH->CR |= FLASH_PSIZE_WORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint32_t*)Address = Data;
+}
+
+/**
+ * @brief Program a half-word (16-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.1V to 3.6V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+ FLASH->CR |= FLASH_PSIZE_HALF_WORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint16_t*)Address = Data;
+}
+
+/**
+ * @brief Program byte (8-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 1.8V to 3.6V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+ FLASH->CR |= FLASH_PSIZE_BYTE;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint8_t*)Address = Data;
+}
+
+/**
+ * @brief Set the specific FLASH error flag.
+ * @retval None
+ */
+static void FLASH_SetErrorCode(void)
+{
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+
+ /* Clear FLASH write protection error pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR);
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
+
+ /* Clear FLASH Programming alignment error pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR);
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
+
+ /* Clear FLASH Programming parallelism error pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR);
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS;
+
+ /* Clear FLASH Programming sequence error pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR);
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
+
+ /* Clear FLASH Proprietary readout protection error pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR);
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
+
+ /* Clear FLASH Operation error pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR);
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,442 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FLASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_H
+#define __STM32F4xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0U,
+ FLASH_PROC_SECTERASE,
+ FLASH_PROC_MASSERASE,
+ FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
+
+ __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
+
+ __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/
+
+ __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
+
+ __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
+
+ __IO uint32_t Address; /*Internal variable to save address selected for program*/
+
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+
+ __IO uint32_t ErrorCode; /* FLASH error code */
+
+}FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+/** @defgroup FLASH_Error_Code FLASH Error Code
+ * @brief FLASH Error Code
+ * @{
+ */
+#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000001U) /*!< Read Protection error */
+#define HAL_FLASH_ERROR_PGS ((uint32_t)0x00000002U) /*!< Programming Sequence error */
+#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004U) /*!< Programming Parallelism error */
+#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008U) /*!< Programming Alignment error */
+#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010U) /*!< Write protection error */
+#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020U) /*!< Operation Error */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00U) /*!< Program byte (8-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01U) /*!< Program a half-word (16-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02U) /*!< Program a word (32-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03U) /*!< Program a double word (64-bit) at a specified address */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @brief Flag definition
+ * @{
+ */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
+#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
+#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
+#define FLASH_FLAG_RDERR ((uint32_t)0x00000100U) /*!< Read Protection error flag (PCROP) */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR ((uint32_t)0x02000000U) /*!< Error Interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+ * @{
+ */
+#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000U)
+#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100U)
+#define FLASH_PSIZE_WORD ((uint32_t)0x00000200U)
+#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300U)
+#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFFU)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Keys FLASH Keys
+ * @{
+ */
+#define RDP_KEY ((uint16_t)0x00A5U)
+#define FLASH_KEY1 ((uint32_t)0x45670123U)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89ABU)
+#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3BU)
+#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7FU)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @{
+ */
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval none
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
+
+/**
+ * @brief Get the FLASH Latency.
+ * @retval FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ */
+#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+ * @brief Enable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
+
+/**
+ * @brief Disable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
+
+/**
+ * @brief Enable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
+
+/**
+ * @brief Disable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
+
+/**
+ * @brief Resets the FLASH instruction Cache.
+ * @note This function must be used only when the Instruction Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \
+ FLASH->ACR &= ~FLASH_ACR_ICRST; \
+ }while(0)
+
+/**
+ * @brief Resets the FLASH data Cache.
+ * @note This function must be used only when the data Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \
+ FLASH->ACR &= ~FLASH_ACR_DCRST; \
+ }while(0)
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))==(__FLAG__))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f4xx_hal_flash_ex.h"
+#include "stm32f4xx_hal_flash_ramfunc.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @{
+ */
+/* Program operation functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+uint32_t HAL_FLASH_GetError(void);
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+ * @{
+ */
+
+/**
+ * @brief ACR register byte 0 (Bits[7:0]) base address
+ */
+#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00U)
+/**
+ * @brief OPTCR register byte 0 (Bits[7:0]) base address
+ */
+#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14U)
+/**
+ * @brief OPTCR register byte 1 (Bits[15:8]) base address
+ */
+#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15U)
+/**
+ * @brief OPTCR register byte 2 (Bits[23:16]) base address
+ */
+#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16U)
+/**
+ * @brief OPTCR register byte 3 (Bits[31:24]) base address
+ */
+#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17U)
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
+ * @{
+ */
+#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1359 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Extended FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the FLASH extension peripheral:
+ * + Extended programming operations functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Flash Extension features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and
+ STM32F429xx/439xx devices contains the following additional features
+
+ (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write
+ capability (RWW)
+ (+) Dual bank memory organization
+ (+) PCROP protection for all banks
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure and program the FLASH memory
+ of all STM32F427xx/437xx, STM32F429xx/439xx, STM32F469xx/479xx and STM32F446xx
+ devices. It includes
+ (#) FLASH Memory Erase functions:
+ (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
+ HAL_FLASH_Lock() functions
+ (++) Erase function: Erase sector, erase all sectors
+ (++) There are two modes of erase :
+ (+++) Polling Mode using HAL_FLASHEx_Erase()
+ (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT()
+
+ (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to :
+ (++) Set/Reset the write protection
+ (++) Set the Read protection Level
+ (++) Set the BOR level
+ (++) Program the user Option Bytes
+ (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to :
+ (++) Extended space (bank 2) erase function
+ (++) Full FLASH space (2 Mo) erase (bank 1 and bank 2)
+ (++) Dual Boot activation
+ (++) Write protection configuration for bank 2
+ (++) PCROP protection configuration and control for both banks
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASHEx FLASHEx
+ * @brief FLASH HAL Extension module driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Constants
+ * @{
+ */
+#define FLASH_TIMEOUT_VALUE ((uint32_t)50000U)/* 50 s */
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Variables
+ * @{
+ */
+extern FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Functions
+ * @{
+ */
+/* Option bytes control */
+static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks);
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks);
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks);
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level);
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby);
+static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level);
+static uint8_t FLASH_OB_GetUser(void);
+static uint16_t FLASH_OB_GetWRP(void);
+static uint8_t FLASH_OB_GetRDP(void);
+static uint8_t FLASH_OB_GetBOR(void);
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\
+ defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector);
+static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector);
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks);
+static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks);
+static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions
+ * @brief Extended IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended programming operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the Extension FLASH
+ programming operations.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory sectors
+ * @param[in] pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @param[out] SectorError: pointer to variable that
+ * contains the configuration information on faulty sector in case of error
+ * (0xFFFFFFFFU means that all the sectors have been correctly erased)
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t index = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /*Initialization of SectorError variable*/
+ *SectorError = 0xFFFFFFFFU;
+
+ if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* if the erase operation is completed, disable the MER Bit */
+ FLASH->CR &= (~FLASH_MER_BIT);
+ }
+ else
+ {
+ /* Check the parameters */
+ assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+ /* Erase by sector by sector to be done*/
+ for(index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++)
+ {
+ FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the SER and SNB Bits */
+ CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB));
+
+ if(status != HAL_OK)
+ {
+ /* In case of error, stop erase procedure and return the faulty sector*/
+ *SectorError = index;
+ break;
+ }
+ }
+ }
+ /* Flush the caches to be sure of the data consistency */
+ FLASH_FlushCaches();
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled
+ * @param pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Enable End of FLASH Operation interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+
+ /* Enable Error source interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+ /* Clear pending flags (if any) */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+ FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_PGSERR);
+
+ if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
+ pFlash.Bank = pEraseInit->Banks;
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
+ }
+ else
+ {
+ /* Erase by sector to be done*/
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+ pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE;
+ pFlash.NbSectorsToErase = pEraseInit->NbSectors;
+ pFlash.Sector = pEraseInit->Sector;
+ pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange;
+
+ /*Erase 1st sector and wait for IT*/
+ FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Program option bytes
+ * @param pOBInit: pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
+
+ /*Write protection configuration*/
+ if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
+ {
+ assert_param(IS_WRPSTATE(pOBInit->WRPState));
+ if(pOBInit->WRPState == OB_WRPSTATE_ENABLE)
+ {
+ /*Enable of Write protection on the selected Sector*/
+ status = FLASH_OB_EnableWRP(pOBInit->WRPSector, pOBInit->Banks);
+ }
+ else
+ {
+ /*Disable of Write protection on the selected Sector*/
+ status = FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks);
+ }
+ }
+
+ /*Read protection configuration*/
+ if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
+ {
+ status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
+ }
+
+ /*USER configuration*/
+ if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
+ {
+ status = FLASH_OB_UserConfig(pOBInit->USERConfig&OB_IWDG_SW,
+ pOBInit->USERConfig&OB_STOP_NO_RST,
+ pOBInit->USERConfig&OB_STDBY_NO_RST);
+ }
+
+ /*BOR Level configuration*/
+ if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR)
+ {
+ status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Get the Option byte configuration
+ * @param pOBInit: pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval None
+ */
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_BOR;
+
+ /*Get WRP*/
+ pOBInit->WRPSector = (uint32_t)FLASH_OB_GetWRP();
+
+ /*Get RDP Level*/
+ pOBInit->RDPLevel = (uint32_t)FLASH_OB_GetRDP();
+
+ /*Get USER*/
+ pOBInit->USERConfig = (uint8_t)FLASH_OB_GetUser();
+
+ /*Get BOR Level*/
+ pOBInit->BORLevel = (uint32_t)FLASH_OB_GetBOR();
+}
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/**
+ * @brief Program option bytes
+ * @param pAdvOBInit: pointer to an FLASH_AdvOBProgramInitTypeDef structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Check the parameters */
+ assert_param(IS_OBEX(pAdvOBInit->OptionType));
+
+ /*Program PCROP option byte*/
+ if(((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP)
+ {
+ /* Check the parameters */
+ assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState));
+ if((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE)
+ {
+ /*Enable of Write protection on the selected Sector*/
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
+ defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+ status = FLASH_OB_EnablePCROP(pAdvOBInit->Sectors);
+#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+ status = FLASH_OB_EnablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks);
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+ }
+ else
+ {
+ /*Disable of Write protection on the selected Sector*/
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
+ defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+ status = FLASH_OB_DisablePCROP(pAdvOBInit->Sectors);
+#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+ status = FLASH_OB_DisablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks);
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+ }
+ }
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ /*Program BOOT config option byte*/
+ if(((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG)
+ {
+ status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig);
+ }
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+ return status;
+}
+
+/**
+ * @brief Get the OBEX byte configuration
+ * @param pAdvOBInit: pointer to an FLASH_AdvOBProgramInitTypeDef structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval None
+ */
+void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit)
+{
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
+ defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+ /*Get Sector*/
+ pAdvOBInit->Sectors = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
+#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+ /*Get Sector for Bank1*/
+ pAdvOBInit->SectorsBank1 = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
+
+ /*Get Sector for Bank2*/
+ pAdvOBInit->SectorsBank2 = (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS));
+
+ /*Get Boot config OB*/
+ pAdvOBInit->BootConfig = *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS;
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+}
+
+/**
+ * @brief Select the Protection Mode
+ *
+ * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted
+ * Global Read Out Protection modification (from level1 to level0)
+ * @note Once SPRMOD bit is active unprotection of a protected sector is not possible
+ * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag
+ * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/
+ * STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void)
+{
+ uint8_t optiontmp = 0xFFU;
+
+ /* Mask SPRMOD bit */
+ optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7FU);
+
+ /* Update Option Byte */
+ *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deselect the Protection Mode
+ *
+ * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted
+ * Global Read Out Protection modification (from level1 to level0)
+ * @note Once SPRMOD bit is active unprotection of a protected sector is not possible
+ * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag
+ * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/
+ * STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void)
+{
+ uint8_t optiontmp = 0xFFU;
+
+ /* Mask SPRMOD bit */
+ optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7FU);
+
+ /* Update Option Byte */
+ *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp);
+
+ return HAL_OK;
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx ||\
+ STM32F411xE || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Returns the FLASH Write Protection Option Bytes value for Bank 2
+ * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx devices.
+ * @retval The FLASH Write Protection Option Bytes value
+ */
+uint16_t HAL_FLASHEx_OB_GetBank2WRP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS));
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Full erase of FLASH memory sectors
+ * @param VoltageRange: The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @param Banks: Banks to be erased
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: Bank1 to be erased
+ * @arg FLASH_BANK_2: Bank2 to be erased
+ * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
+ *
+ * @retval HAL Status
+ */
+static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
+{
+ /* Check the parameters */
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* if the previous operation is completed, proceed to erase all sectors */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+
+ if(Banks == FLASH_BANK_BOTH)
+ {
+ /* bank1 & bank2 will be erased*/
+ FLASH->CR |= FLASH_MER_BIT;
+ }
+ else if(Banks == FLASH_BANK_1)
+ {
+ /*Only bank1 will be erased*/
+ FLASH->CR |= FLASH_CR_MER1;
+ }
+ else
+ {
+ /*Only bank2 will be erased*/
+ FLASH->CR |= FLASH_CR_MER2;
+ }
+ FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8U);
+}
+
+/**
+ * @brief Erase the specified FLASH memory sector
+ * @param Sector: FLASH sector to erase
+ * The value of this parameter depend on device used within the same series
+ * @param VoltageRange: The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @retval None
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
+{
+ uint32_t tmp_psize = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_SECTOR(Sector));
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+ if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
+ {
+ tmp_psize = FLASH_PSIZE_BYTE;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
+ {
+ tmp_psize = FLASH_PSIZE_HALF_WORD;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
+ {
+ tmp_psize = FLASH_PSIZE_WORD;
+ }
+ else
+ {
+ tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
+ }
+
+ /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */
+ if(Sector > FLASH_SECTOR_11)
+ {
+ Sector += 4U;
+ }
+ /* If the previous operation is completed, proceed to erase the sector */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+ FLASH->CR |= tmp_psize;
+ CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
+ FLASH->CR |= FLASH_CR_SER | (Sector << POSITION_VAL(FLASH_CR_SNB));
+ FLASH->CR |= FLASH_CR_STRT;
+}
+
+/**
+ * @brief Enable the write protection of the desired bank1 or bank 2 sectors
+ *
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash sector i if CortexM4
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
+ *
+ * @param WRPSector: specifies the sector(s) to be write protected.
+ * This parameter can be one of the following values:
+ * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23
+ * @arg OB_WRP_SECTOR_All
+ * @note BANK2 starts from OB_WRP_SECTOR_12
+ *
+ * @param Banks: Enable write protection on all the sectors for the specific bank
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: WRP on all sectors of bank1
+ * @arg FLASH_BANK_2: WRP on all sectors of bank2
+ * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
+ *
+ * @retval HAL FLASH State
+ */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP_SECTOR(WRPSector));
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) ||
+ (WRPSector < OB_WRP_SECTOR_12))
+ {
+ if(WRPSector == OB_WRP_SECTOR_All)
+ {
+ /*Write protection on all sector of BANK1*/
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~(WRPSector>>12U));
+ }
+ else
+ {
+ /*Write protection done on sectors of BANK1*/
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector);
+ }
+ }
+ else
+ {
+ /*Write protection done on sectors of BANK2*/
+ *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12U));
+ }
+
+ /*Write protection on all sector of BANK2*/
+ if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH))
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12U));
+ }
+ }
+
+ }
+ return status;
+}
+
+/**
+ * @brief Disable the write protection of the desired bank1 or bank 2 sectors
+ *
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash sector i if CortexM4
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
+ *
+ * @param WRPSector: specifies the sector(s) to be write protected.
+ * This parameter can be one of the following values:
+ * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23
+ * @arg OB_WRP_Sector_All
+ * @note BANK2 starts from OB_WRP_SECTOR_12
+ *
+ * @param Banks: Disable write protection on all the sectors for the specific bank
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: Bank1 to be erased
+ * @arg FLASH_BANK_2: Bank2 to be erased
+ * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP_SECTOR(WRPSector));
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) ||
+ (WRPSector < OB_WRP_SECTOR_12))
+ {
+ if(WRPSector == OB_WRP_SECTOR_All)
+ {
+ /*Write protection on all sector of BANK1*/
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12U);
+ }
+ else
+ {
+ /*Write protection done on sectors of BANK1*/
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector;
+ }
+ }
+ else
+ {
+ /*Write protection done on sectors of BANK2*/
+ *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12U);
+ }
+
+ /*Write protection on all sector of BANK2*/
+ if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH))
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12U);
+ }
+ }
+
+ }
+
+ return status;
+}
+
+/**
+ * @brief Configure the Dual Bank Boot.
+ *
+ * @note This function can be used only for STM32F42xxx/43xxx devices.
+ *
+ * @param BootConfig specifies the Dual Bank Boot Option byte.
+ * This parameter can be one of the following values:
+ * @arg OB_Dual_BootEnabled: Dual Bank Boot Enable
+ * @arg OB_Dual_BootDisabled: Dual Bank Boot Disabled
+ * @retval None
+ */
+static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_BOOT(BootConfig));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Set Dual Bank Boot */
+ *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2);
+ *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= BootConfig;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Enable the read/write protection (PCROP) of the desired
+ * sectors of Bank 1 and/or Bank 2.
+ * @note This function can be used only for STM32F42xxx/43xxx devices.
+ * @param SectorBank1 Specifies the sector(s) to be read/write protected or unprotected for bank1.
+ * This parameter can be one of the following values:
+ * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11
+ * @arg OB_PCROP_SECTOR__All
+ * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2.
+ * This parameter can be one of the following values:
+ * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23
+ * @arg OB_PCROP_SECTOR__All
+ * @param Banks Enable PCROP protection on all the sectors for the specific bank
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: WRP on all sectors of bank1
+ * @arg FLASH_BANK_2: WRP on all sectors of bank2
+ * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))
+ {
+ assert_param(IS_OB_PCROP(SectorBank1));
+ /*Write protection done on sectors of BANK1*/
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1;
+ }
+ else
+ {
+ assert_param(IS_OB_PCROP(SectorBank2));
+ /*Write protection done on sectors of BANK2*/
+ *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2;
+ }
+
+ /*Write protection on all sector of BANK2*/
+ if(Banks == FLASH_BANK_BOTH)
+ {
+ assert_param(IS_OB_PCROP(SectorBank2));
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /*Write protection done on sectors of BANK2*/
+ *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2;
+ }
+ }
+
+ }
+
+ return status;
+}
+
+
+/**
+ * @brief Disable the read/write protection (PCROP) of the desired
+ * sectors of Bank 1 and/or Bank 2.
+ * @note This function can be used only for STM32F42xxx/43xxx devices.
+ * @param SectorBank1 specifies the sector(s) to be read/write protected or unprotected for bank1.
+ * This parameter can be one of the following values:
+ * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11
+ * @arg OB_PCROP_SECTOR__All
+ * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2.
+ * This parameter can be one of the following values:
+ * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23
+ * @arg OB_PCROP_SECTOR__All
+ * @param Banks Disable PCROP protection on all the sectors for the specific bank
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: WRP on all sectors of bank1
+ * @arg FLASH_BANK_2: WRP on all sectors of bank2
+ * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))
+ {
+ assert_param(IS_OB_PCROP(SectorBank1));
+ /*Write protection done on sectors of BANK1*/
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~SectorBank1);
+ }
+ else
+ {
+ /*Write protection done on sectors of BANK2*/
+ assert_param(IS_OB_PCROP(SectorBank2));
+ *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2);
+ }
+
+ /*Write protection on all sector of BANK2*/
+ if(Banks == FLASH_BANK_BOTH)
+ {
+ assert_param(IS_OB_PCROP(SectorBank2));
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /*Write protection done on sectors of BANK2*/
+ *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2);
+ }
+ }
+
+ }
+
+ return status;
+
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Mass erase of FLASH memory
+ * @param VoltageRange: The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @param Banks: Banks to be erased
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: Bank1 to be erased
+ *
+ * @retval None
+ */
+static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
+{
+ /* Check the parameters */
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* If the previous operation is completed, proceed to erase all sectors */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+ FLASH->CR |= FLASH_CR_MER;
+ FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8U);
+}
+
+/**
+ * @brief Erase the specified FLASH memory sector
+ * @param Sector: FLASH sector to erase
+ * The value of this parameter depend on device used within the same series
+ * @param VoltageRange: The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @retval None
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
+{
+ uint32_t tmp_psize = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_SECTOR(Sector));
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+ if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
+ {
+ tmp_psize = FLASH_PSIZE_BYTE;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
+ {
+ tmp_psize = FLASH_PSIZE_HALF_WORD;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
+ {
+ tmp_psize = FLASH_PSIZE_WORD;
+ }
+ else
+ {
+ tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
+ }
+
+ /* If the previous operation is completed, proceed to erase the sector */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+ FLASH->CR |= tmp_psize;
+ CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
+ FLASH->CR |= FLASH_CR_SER | (Sector << POSITION_VAL(FLASH_CR_SNB));
+ FLASH->CR |= FLASH_CR_STRT;
+}
+
+/**
+ * @brief Enable the write protection of the desired bank 1 sectors
+ *
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash sector i if CortexM4
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
+ *
+ * @param WRPSector: specifies the sector(s) to be write protected.
+ * The value of this parameter depend on device used within the same series
+ *
+ * @param Banks: Enable write protection on all the sectors for the specific bank
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: WRP on all sectors of bank1
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP_SECTOR(WRPSector));
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Disable the write protection of the desired bank 1 sectors
+ *
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash sector i if CortexM4
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
+ *
+ * @param WRPSector: specifies the sector(s) to be write protected.
+ * The value of this parameter depend on device used within the same series
+ *
+ * @param Banks: Enable write protection on all the sectors for the specific bank
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: WRP on all sectors of bank1
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP_SECTOR(WRPSector));
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector;
+ }
+
+ return status;
+}
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
+ defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/**
+ * @brief Enable the read/write protection (PCROP) of the desired sectors.
+ * @note This function can be used only for STM32F401xx devices.
+ * @param Sector specifies the sector(s) to be read/write protected or unprotected.
+ * This parameter can be one of the following values:
+ * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
+ * @arg OB_PCROP_Sector_All
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_PCROP(Sector));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector;
+ }
+
+ return status;
+}
+
+
+/**
+ * @brief Disable the read/write protection (PCROP) of the desired sectors.
+ * @note This function can be used only for STM32F401xx devices.
+ * @param Sector specifies the sector(s) to be read/write protected or unprotected.
+ * This parameter can be one of the following values:
+ * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
+ * @arg OB_PCROP_Sector_All
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_PCROP(Sector));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~Sector);
+ }
+
+ return status;
+
+}
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @brief Set the read protection level.
+ * @param Level: specifies the read protection level.
+ * This parameter can be one of the following values:
+ * @arg OB_RDP_LEVEL_0: No protection
+ * @arg OB_RDP_LEVEL_1: Read protection of the memory
+ * @arg OB_RDP_LEVEL_2: Full chip protection
+ *
+ * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_RDP_LEVEL(Level));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = Level;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+ * @param Iwdg: Selects the IWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_SW: Software IWDG selected
+ * @arg OB_IWDG_HW: Hardware IWDG selected
+ * @param Stop: Reset event when entering STOP mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STOP_NO_RST: No reset generated when entering in STOP
+ * @arg OB_STOP_RST: Reset generated when entering in STOP
+ * @param Stdby: Reset event when entering Standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
+ * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby)
+{
+ uint8_t optiontmp = 0xFFU;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_IWDG_SOURCE(Iwdg));
+ assert_param(IS_OB_STOP_SOURCE(Stop));
+ assert_param(IS_OB_STDBY_SOURCE(Stdby));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */
+ optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1FU);
+
+ /* Update User Option Byte */
+ *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp)));
+ }
+
+ return status;
+}
+
+/**
+ * @brief Set the BOR Level.
+ * @param Level: specifies the Option Bytes BOR Reset Level.
+ * This parameter can be one of the following values:
+ * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+ * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+ * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+ * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level)
+{
+ /* Check the parameters */
+ assert_param(IS_OB_BOR_LEVEL(Level));
+
+ /* Set the BOR Level */
+ *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV);
+ *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= Level;
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Return the FLASH User Option Byte value.
+ * @retval uint8_t FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1)
+ * and RST_STDBY(Bit2).
+ */
+static uint8_t FLASH_OB_GetUser(void)
+{
+ /* Return the User Option Byte */
+ return ((uint8_t)(FLASH->OPTCR & 0xE0U));
+}
+
+/**
+ * @brief Return the FLASH Write Protection Option Bytes value.
+ * @retval uint16_t FLASH Write Protection Option Bytes value
+ */
+static uint16_t FLASH_OB_GetWRP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
+}
+
+/**
+ * @brief Returns the FLASH Read Protection level.
+ * @retval FLASH ReadOut Protection Status:
+ * This parameter can be one of the following values:
+ * @arg OB_RDP_LEVEL_0: No protection
+ * @arg OB_RDP_LEVEL_1: Read protection of the memory
+ * @arg OB_RDP_LEVEL_2: Full chip protection
+ */
+static uint8_t FLASH_OB_GetRDP(void)
+{
+ uint8_t readstatus = OB_RDP_LEVEL_0;
+
+ if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2))
+ {
+ readstatus = OB_RDP_LEVEL_2;
+ }
+ else if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_1))
+ {
+ readstatus = OB_RDP_LEVEL_1;
+ }
+ else
+ {
+ readstatus = OB_RDP_LEVEL_0;
+ }
+
+ return readstatus;
+}
+
+/**
+ * @brief Returns the FLASH BOR level.
+ * @retval uint8_t The FLASH BOR level:
+ * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+ * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+ * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+ * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V
+ */
+static uint8_t FLASH_OB_GetBOR(void)
+{
+ /* Return the FLASH BOR level */
+ return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0CU);
+}
+
+/**
+ * @brief Flush the instruction and data caches
+ * @retval None
+ */
+void FLASH_FlushCaches(void)
+{
+ /* Flush instruction cache */
+ if(READ_BIT(FLASH->ACR, FLASH_ACR_ICEN)!= RESET)
+ {
+ /* Disable instruction cache */
+ __HAL_FLASH_INSTRUCTION_CACHE_DISABLE();
+ /* Reset instruction cache */
+ __HAL_FLASH_INSTRUCTION_CACHE_RESET();
+ /* Enable instruction cache */
+ __HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
+ }
+
+ /* Flush data cache */
+ if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != RESET)
+ {
+ /* Disable data cache */
+ __HAL_FLASH_DATA_CACHE_DISABLE();
+ /* Reset data cache */
+ __HAL_FLASH_DATA_CACHE_RESET();
+ /* Enable data cache */
+ __HAL_FLASH_DATA_CACHE_ENABLE();
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,984 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FLASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_EX_H
+#define __STM32F4xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< Mass erase or sector Erase.
+ This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+ uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Sectors */
+
+ uint32_t NbSectors; /*!< Number of sectors to be erased.
+ This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
+
+ uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
+ This parameter must be a value of @ref FLASHEx_Voltage_Range */
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Option Bytes Program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured.
+ This parameter can be a value of @ref FLASHEx_Option_Type */
+
+ uint32_t WRPState; /*!< Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_WRP_State */
+
+ uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
+ The value of this parameter depend on device used within the same series */
+
+ uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint32_t RDPLevel; /*!< Set the read protection level.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
+
+ uint32_t BORLevel; /*!< Set the BOR Level.
+ This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
+
+ uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @brief FLASH Advanced Option Bytes Program structure definition
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured for extension.
+ This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */
+
+ uint32_t PCROPState; /*!< PCROP activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_PCROP_State */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+ uint16_t Sectors; /*!< specifies the sector(s) set for PCROP.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\
+ STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+ uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
+ This parameter can be a value of @ref FLASHEx_Dual_Boot */
+
+#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+}FLASH_AdvOBProgramInitTypeDef;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define FLASH_TYPEERASE_SECTORS ((uint32_t)0x00U) /*!< Sectors erase only */
+#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01U) /*!< Flash Mass erase activation */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
+ * @{
+ */
+#define FLASH_VOLTAGE_RANGE_1 ((uint32_t)0x00U) /*!< Device operating range: 1.8V to 2.1V */
+#define FLASH_VOLTAGE_RANGE_2 ((uint32_t)0x01U) /*!< Device operating range: 2.1V to 2.7V */
+#define FLASH_VOLTAGE_RANGE_3 ((uint32_t)0x02U) /*!< Device operating range: 2.7V to 3.6V */
+#define FLASH_VOLTAGE_RANGE_4 ((uint32_t)0x03U) /*!< Device operating range: 2.7V to 3.6V + External Vpp */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_WRP_State FLASH WRP State
+ * @{
+ */
+#define OB_WRPSTATE_DISABLE ((uint32_t)0x00U) /*!< Disable the write protection of the desired bank 1 sectors */
+#define OB_WRPSTATE_ENABLE ((uint32_t)0x01U) /*!< Enable the write protection of the desired bank 1 sectors */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Type FLASH Option Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01U) /*!< WRP option byte configuration */
+#define OPTIONBYTE_RDP ((uint32_t)0x02U) /*!< RDP option byte configuration */
+#define OPTIONBYTE_USER ((uint32_t)0x04U) /*!< USER option byte configuration */
+#define OPTIONBYTE_BOR ((uint32_t)0x08U) /*!< BOR option byte configuration */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAAU)
+#define OB_RDP_LEVEL_1 ((uint8_t)0x55U)
+#define OB_RDP_LEVEL_2 ((uint8_t)0xCCU) /*!< Warning: When enabling read protection level 2
+ it s no more possible to go back to level 1 or 0 */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
+ * @{
+ */
+#define OB_IWDG_SW ((uint8_t)0x20U) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint8_t)0x00U) /*!< Hardware IWDG selected */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint8_t)0x40U) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint8_t)0x00U) /*!< Reset generated when entering in STOP */
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint8_t)0x80U) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint8_t)0x00U) /*!< Reset generated when entering in STANDBY */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
+ * @{
+ */
+#define OB_BOR_LEVEL3 ((uint8_t)0x00U) /*!< Supply voltage ranges from 2.70 to 3.60 V */
+#define OB_BOR_LEVEL2 ((uint8_t)0x04U) /*!< Supply voltage ranges from 2.40 to 2.70 V */
+#define OB_BOR_LEVEL1 ((uint8_t)0x08U) /*!< Supply voltage ranges from 2.10 to 2.40 V */
+#define OB_BOR_OFF ((uint8_t)0x0CU) /*!< Supply voltage ranges from 1.62 to 2.10 V */
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/** @defgroup FLASHEx_PCROP_State FLASH PCROP State
+ * @{
+ */
+#define OB_PCROP_STATE_DISABLE ((uint32_t)0x00U) /*!< Disable PCROP */
+#define OB_PCROP_STATE_ENABLE ((uint32_t)0x01U) /*!< Enable PCROP */
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
+ STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx) || defined(STM32F412Rx) ||\
+ STM32F412Cx */
+
+/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define OPTIONBYTE_PCROP ((uint32_t)0x01U) /*!< PCROP option byte configuration */
+#define OPTIONBYTE_BOOTCONFIG ((uint32_t)0x02U) /*!< BOOTConfig option byte configuration */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define OPTIONBYTE_PCROP ((uint32_t)0x01U) /*!<PCROP option byte configuration */
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+/*------------------------- STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx ----------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
+#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
+#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
+#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
+#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
+#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
+#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
+#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/*-------------------------- STM32F40xxx/STM32F41xxx/STM32F401xx/STM32F411xx -----------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Banks FLASH Banks
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define FLASH_BANK_1 ((uint32_t)1U) /*!< Bank 1 */
+#define FLASH_BANK_2 ((uint32_t)2U) /*!< Bank 2 */
+#define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define FLASH_BANK_1 ((uint32_t)1U) /*!< Bank 1 */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits here to clear */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER Bit */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Sectors FLASH Sectors
+ * @{
+ */
+/*-------------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx ------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6U) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7U) /*!< Sector Number 7 */
+#define FLASH_SECTOR_8 ((uint32_t)8U) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9U) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10U) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11U) /*!< Sector Number 11 */
+#define FLASH_SECTOR_12 ((uint32_t)12U) /*!< Sector Number 12 */
+#define FLASH_SECTOR_13 ((uint32_t)13U) /*!< Sector Number 13 */
+#define FLASH_SECTOR_14 ((uint32_t)14U) /*!< Sector Number 14 */
+#define FLASH_SECTOR_15 ((uint32_t)15U) /*!< Sector Number 15 */
+#define FLASH_SECTOR_16 ((uint32_t)16U) /*!< Sector Number 16 */
+#define FLASH_SECTOR_17 ((uint32_t)17U) /*!< Sector Number 17 */
+#define FLASH_SECTOR_18 ((uint32_t)18U) /*!< Sector Number 18 */
+#define FLASH_SECTOR_19 ((uint32_t)19U) /*!< Sector Number 19 */
+#define FLASH_SECTOR_20 ((uint32_t)20U) /*!< Sector Number 20 */
+#define FLASH_SECTOR_21 ((uint32_t)21U) /*!< Sector Number 21 */
+#define FLASH_SECTOR_22 ((uint32_t)22U) /*!< Sector Number 22 */
+#define FLASH_SECTOR_23 ((uint32_t)23U) /*!< Sector Number 23 */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6U) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7U) /*!< Sector Number 7 */
+#define FLASH_SECTOR_8 ((uint32_t)8U) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9U) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10U) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11U) /*!< Sector Number 11 */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F410xx -------------------------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6U) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7U) /*!< Sector Number 7 */
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+ * @{
+ */
+/*--------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx -------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001U) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002U) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004U) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008U) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010U) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020U) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040U) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080U) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100U) /*!< Write protection of Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200U) /*!< Write protection of Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400U) /*!< Write protection of Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800U) /*!< Write protection of Sector11 */
+#define OB_WRP_SECTOR_12 ((uint32_t)0x00000001U << 12) /*!< Write protection of Sector12 */
+#define OB_WRP_SECTOR_13 ((uint32_t)0x00000002U << 12) /*!< Write protection of Sector13 */
+#define OB_WRP_SECTOR_14 ((uint32_t)0x00000004U << 12) /*!< Write protection of Sector14 */
+#define OB_WRP_SECTOR_15 ((uint32_t)0x00000008U << 12) /*!< Write protection of Sector15 */
+#define OB_WRP_SECTOR_16 ((uint32_t)0x00000010U << 12) /*!< Write protection of Sector16 */
+#define OB_WRP_SECTOR_17 ((uint32_t)0x00000020U << 12) /*!< Write protection of Sector17 */
+#define OB_WRP_SECTOR_18 ((uint32_t)0x00000040U << 12) /*!< Write protection of Sector18 */
+#define OB_WRP_SECTOR_19 ((uint32_t)0x00000080U << 12) /*!< Write protection of Sector19 */
+#define OB_WRP_SECTOR_20 ((uint32_t)0x00000100U << 12) /*!< Write protection of Sector20 */
+#define OB_WRP_SECTOR_21 ((uint32_t)0x00000200U << 12) /*!< Write protection of Sector21 */
+#define OB_WRP_SECTOR_22 ((uint32_t)0x00000400U << 12) /*!< Write protection of Sector22 */
+#define OB_WRP_SECTOR_23 ((uint32_t)0x00000800U << 12) /*!< Write protection of Sector23 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFFU << 12) /*!< Write protection of all Sectors */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001U) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002U) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004U) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008U) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010U) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020U) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040U) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080U) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100U) /*!< Write protection of Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200U) /*!< Write protection of Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400U) /*!< Write protection of Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800U) /*!< Write protection of Sector11 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFFU) /*!< Write protection of all Sectors */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001U) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002U) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004U) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008U) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010U) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020U) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFFU) /*!< Write protection of all Sectors */
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F410xx -------------------------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001U) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002U) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004U) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008U) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010U) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFFU) /*!< Write protection of all Sectors */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001U) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002U) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004U) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008U) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010U) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020U) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040U) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080U) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFFU) /*!< Write protection of all Sectors */
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASH Option Bytes PC ReadWrite Protection
+ * @{
+ */
+/*-------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx ---------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010U) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020U) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040U) /*!< PC Read/Write protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080U) /*!< PC Read/Write protection of Sector7 */
+#define OB_PCROP_SECTOR_8 ((uint32_t)0x00000100U) /*!< PC Read/Write protection of Sector8 */
+#define OB_PCROP_SECTOR_9 ((uint32_t)0x00000200U) /*!< PC Read/Write protection of Sector9 */
+#define OB_PCROP_SECTOR_10 ((uint32_t)0x00000400U) /*!< PC Read/Write protection of Sector10 */
+#define OB_PCROP_SECTOR_11 ((uint32_t)0x00000800U) /*!< PC Read/Write protection of Sector11 */
+#define OB_PCROP_SECTOR_12 ((uint32_t)0x00000001U) /*!< PC Read/Write protection of Sector12 */
+#define OB_PCROP_SECTOR_13 ((uint32_t)0x00000002U) /*!< PC Read/Write protection of Sector13 */
+#define OB_PCROP_SECTOR_14 ((uint32_t)0x00000004U) /*!< PC Read/Write protection of Sector14 */
+#define OB_PCROP_SECTOR_15 ((uint32_t)0x00000008U) /*!< PC Read/Write protection of Sector15 */
+#define OB_PCROP_SECTOR_16 ((uint32_t)0x00000010U) /*!< PC Read/Write protection of Sector16 */
+#define OB_PCROP_SECTOR_17 ((uint32_t)0x00000020U) /*!< PC Read/Write protection of Sector17 */
+#define OB_PCROP_SECTOR_18 ((uint32_t)0x00000040U) /*!< PC Read/Write protection of Sector18 */
+#define OB_PCROP_SECTOR_19 ((uint32_t)0x00000080U) /*!< PC Read/Write protection of Sector19 */
+#define OB_PCROP_SECTOR_20 ((uint32_t)0x00000100U) /*!< PC Read/Write protection of Sector20 */
+#define OB_PCROP_SECTOR_21 ((uint32_t)0x00000200U) /*!< PC Read/Write protection of Sector21 */
+#define OB_PCROP_SECTOR_22 ((uint32_t)0x00000400U) /*!< PC Read/Write protection of Sector22 */
+#define OB_PCROP_SECTOR_23 ((uint32_t)0x00000800U) /*!< PC Read/Write protection of Sector23 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFFU) /*!< PC Read/Write protection of all Sectors */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010U) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020U) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFFU) /*!< PC Read/Write protection of all Sectors */
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F410xx -------------------------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010U) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFFU) /*!< PC Read/Write protection of all Sectors */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*-------------- STM32F401xE/STM32F411xE/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F446xx --*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010U) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020U) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040U) /*!< PC Read/Write protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080U) /*!< PC Read/Write protection of Sector7 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFFU) /*!< PC Read/Write protection of all Sectors */
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Dual_Boot FLASH Dual Boot
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define OB_DUAL_BOOT_ENABLE ((uint8_t)0x10U) /*!< Dual Bank Boot Enable */
+#define OB_DUAL_BOOT_DISABLE ((uint8_t)0x00U) /*!< Dual Bank Boot Disable, always boot on User Flash */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Selection_Protection_Mode FLASH Selection Protection Mode
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+#define OB_PCROP_DESELECTED ((uint8_t)0x00U) /*!< Disabled PcROP, nWPRi bits used for Write Protection on sector i */
+#define OB_PCROP_SELECTED ((uint8_t)0x80U) /*!< Enable PcROP, nWPRi bits used for PCRoP Protection on sector i */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
+ STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1
+ * @{
+ */
+/* Extension Program operation functions *************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void);
+HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
+ STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Constants FLASH Private Constants
+ * @{
+ */
+/*--------------------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx---------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define FLASH_SECTOR_TOTAL 24U
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define FLASH_SECTOR_TOTAL 12U
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define FLASH_SECTOR_TOTAL 6U
+#endif /* STM32F401xC */
+
+/*--------------------------------------------- STM32F410xx -------------------------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define FLASH_SECTOR_TOTAL 5U
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/*--------------------------------- STM32F401xE/STM32F411xE/STM32F412xG/STM32F446xx -------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define FLASH_SECTOR_TOTAL 8U
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+/**
+ * @brief OPTCR1 register byte 2 (Bits[23:16]) base address
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define OPTCR1_BYTE2_ADDRESS ((uint32_t)0x40023C1AU)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
+ * @{
+ */
+
+#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
+ ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_4))
+
+#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
+ ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR)))
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1) ||\
+ ((LEVEL) == OB_RDP_LEVEL_2))
+
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
+ ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+#define IS_PCROPSTATE(VALUE)(((VALUE) == OB_PCROP_STATE_DISABLE) || \
+ ((VALUE) == OB_PCROP_STATE_ENABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
+ STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP) || \
+ ((VALUE) == OPTIONBYTE_BOOTCONFIG))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP))
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7) || \
+ ((LATENCY) == FLASH_LATENCY_8) || \
+ ((LATENCY) == FLASH_LATENCY_9) || \
+ ((LATENCY) == FLASH_LATENCY_10) || \
+ ((LATENCY) == FLASH_LATENCY_11) || \
+ ((LATENCY) == FLASH_LATENCY_12) || \
+ ((LATENCY) == FLASH_LATENCY_13) || \
+ ((LATENCY) == FLASH_LATENCY_14) || \
+ ((LATENCY) == FLASH_LATENCY_15))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Vx ||\
+ STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
+ ((BANK) == FLASH_BANK_2) || \
+ ((BANK) == FLASH_BANK_BOTH))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx ||\
+ STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_FLASH_SECTOR(SECTOR) ( ((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
+ ((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
+ ((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\
+ ((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\
+ ((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\
+ ((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\
+ ((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F401xC)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5))
+#endif /* STM32F401xC */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END))
+#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFF000000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* STM32F401xC */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F401xC)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* STM32F401xC */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
+ STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
+ * @{
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
+void FLASH_FlushCaches(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,193 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ramfunc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FLASH RAMFUNC module driver.
+ * This file provides a FLASH firmware functions which should be
+ * executed from internal SRAM
+ * + Stop/Start the flash interface while System Run
+ * + Enable/Disable the flash sleep while System Run
+ @verbatim
+ ==============================================================================
+ ##### APIs executed from Internal RAM #####
+ ==============================================================================
+ [..]
+ *** ARM Compiler ***
+ --------------------
+ [..] RAM functions are defined using the toolchain options.
+ Functions that are be executed in RAM should reside in a separate
+ source module. Using the 'Options for File' dialog you can simply change
+ the 'Code / Const' area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the
+ Options for Target' dialog.
+
+ *** ICCARM Compiler ***
+ -----------------------
+ [..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
+
+ *** GNU Compiler ***
+ --------------------
+ [..] RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASH_RAMFUNC FLASH RAMFUNC
+ * @brief FLASH functions executed from RAM
+ * @{
+ */
+#ifdef HAL_FLASH_MODULE_ENABLED
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM
+ * @brief Peripheral Extended features functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### ramfunc functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions that should be executed from RAM
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Stop the flash interface while System Run
+ * @note This mode is only available for STM32F41xxx/STM32F446xx devices.
+ * @note This mode couldn't be set while executing with the flash itself.
+ * It should be done with specific routine executed from RAM.
+ * @retval None
+ */
+__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void)
+{
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Stop the flash interface while System Run */
+ SET_BIT(PWR->CR, PWR_CR_FISSR);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start the flash interface while System Run
+ * @note This mode is only available for STM32F411xx/STM32F446xx devices.
+ * @note This mode couldn't be set while executing with the flash itself.
+ * It should be done with specific routine executed from RAM.
+ * @retval None
+ */
+__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void)
+{
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Start the flash interface while System Run */
+ CLEAR_BIT(PWR->CR, PWR_CR_FISSR);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the flash sleep while System Run
+ * @note This mode is only available for STM32F41xxx/STM32F446xx devices.
+ * @note This mode could n't be set while executing with the flash itself.
+ * It should be done with specific routine executed from RAM.
+ * @retval None
+ */
+__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void)
+{
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Enable the flash sleep while System Run */
+ SET_BIT(PWR->CR, PWR_CR_FMSSR);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the flash sleep while System Run
+ * @note This mode is only available for STM32F41xxx/STM32F446xx devices.
+ * @note This mode couldn't be set while executing with the flash itself.
+ * It should be done with specific routine executed from RAM.
+ * @retval None
+ */
+__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void)
+{
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Disable the flash sleep while System Run */
+ CLEAR_BIT(PWR->CR, PWR_CR_FMSSR);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#endif /* HAL_FLASH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,97 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ramfunc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FLASH RAMFUNC driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_FLASH_RAMFUNC_H
+#define __STM32F4xx_FLASH_RAMFUNC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH_RAMFUNC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_RAMFUNC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
+ * @{
+ */
+__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void);
+__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,4790 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FMPI2C HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (FMPI2C) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The FMPI2C HAL driver can be used as follows:
+
+ (#) Declare a FMPI2C_HandleTypeDef handle structure, for example:
+ FMPI2C_HandleTypeDef hfmpi2c;
+
+ (#)Initialize the FMPI2C low level resources by implementing the HAL_FMPI2C_MspInit() API:
+ (##) Enable the FMPI2Cx interface clock
+ (##) FMPI2C pins configuration
+ (+++) Enable the clock for the FMPI2C GPIOs
+ (+++) Configure FMPI2C pins as alternate function open-drain
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the FMPI2Cx interrupt priority
+ (+++) Enable the NVIC FMPI2C IRQ Channel
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx channel
+ (+++) Associate the initialized DMA handle to the hfmpi2c DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+ the DMA Tx or Rx channel
+
+ (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode,
+ Own Address2, Own Address2 Mask, General call and Nostretch mode in the hfmpi2c Init structure.
+
+ (#) Initialize the FMPI2C registers by calling the HAL_FMPI2C_Init(), configures also the low level Hardware
+ (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_FMPI2C_MspInit(&hfmpi2c) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_FMPI2C_IsDeviceReady()
+
+ (#) For FMPI2C IO and IO MEM operations, three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Transmit in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Transmit()
+ (+) Receive in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Receive()
+ (+) Transmit in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Transmit()
+ (+) Receive in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Receive()
+
+ *** Polling mode IO MEM operation ***
+ =====================================
+ [..]
+ (+) Write an amount of data in blocking mode to a specific memory address using HAL_FMPI2C_Mem_Write()
+ (+) Read an amount of data in blocking mode from a specific memory address using HAL_FMPI2C_Mem_Read()
+
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Transmit_IT()
+ (+) At transmission end of transfer, HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Receive_IT()
+ (+) At reception end of transfer, HAL_FMPI2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Transmit_IT()
+ (+) At transmission end of transfer, HAL_FMPI2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Receive_IT()
+ (+) At reception end of transfer, HAL_FMPI2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+ (+) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT()
+ (+) End of abort process, HAL_FMPI2C_MasterRxCpltCallback() or HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback() or HAL_FMPI2C_MasterTxCpltCallback()
+ (+) Discard a slave FMPI2C process communication using __HAL_FMPI2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+
+ *** Interrupt mode IO sequential operation ***
+ ===================================
+ [..]
+ (@) These interfaces allow to manage a sequential transfer with a repeated start condition
+ when a direction change during transfer
+ [..]
+ (+) A specific option field manage the different steps of a sequential transfer
+ (+) Option field values are defined through FMPI2C_XFEROPTIONS and are listed below:
+ (++) FMPI2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode
+ (++) FMPI2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition
+ (++) FMPI2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and without a final stop condition in both cases
+ (++) FMPI2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and with a final stop condition in both cases
+
+ (+) Differents sequential FMPI2C interfaces are listed below:
+ (++) Sequential transmit in master FMPI2C mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback()
+ (++) Sequential receive in master FMPI2C mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_FMPI2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback()
+ (++) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT()
+ (+++) End of abort process, HAL_FMPI2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_AbortCpltCallback()
+ (+++) mean HAL_FMPI2C_MasterTxCpltCallback() in case of previous state was master transmit
+ (+++) mean HAL_FMPI2C_MasterRxCpltCallback() in case of previous state was master receive
+ (++) Enable/disable the Address listen mode in slave FMPI2C mode using HAL_FMPI2C_EnableListen_IT() HAL_FMPI2C_DisableListen_IT()
+ (+++) When address slave FMPI2C match, HAL_FMPI2C_AddrCallback() is executed and user can
+ add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
+ (+++) At Listen mode end HAL_FMPI2C_ListenCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ListenCpltCallback()
+ (++) Sequential transmit in slave FMPI2C mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_FMPI2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback()
+ (++) Sequential receive in slave FMPI2C mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_FMPI2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback()
+ (++) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+ (++) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT()
+ (++) End of abort process, HAL_FMPI2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_AbortCpltCallback()
+ (++) Discard a slave FMPI2C process communication using __HAL_FMPI2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** Interrupt mode IO MEM operation ***
+ =======================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using
+ HAL_FMPI2C_Mem_Write_IT()
+ (+) At Memory end of write transfer, HAL_FMPI2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using
+ HAL_FMPI2C_Mem_Read_IT()
+ (+) At Memory end of read transfer, HAL_FMPI2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_FMPI2C_Master_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_FMPI2C_Master_Receive_DMA()
+ (+) At reception end of transfer, HAL_FMPI2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_FMPI2C_Slave_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_FMPI2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_FMPI2C_Slave_Receive_DMA()
+ (+) At reception end of transfer, HAL_FMPI2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+ (+) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT()
+ (+) End of abort process, HAL_FMPI2C_MasterRxCpltCallback() or HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback() or HAL_FMPI2C_MasterTxCpltCallback()
+ (+) Discard a slave FMPI2C process communication using __HAL_FMPI2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** DMA mode IO MEM operation ***
+ =================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using
+ HAL_FMPI2C_Mem_Write_DMA()
+ (+) At Memory end of write transfer, HAL_FMPI2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using
+ HAL_FMPI2C_Mem_Read_DMA()
+ (+) At Memory end of read transfer, HAL_FMPI2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+
+
+ *** FMPI2C HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in FMPI2C HAL driver.
+
+ (+) __HAL_FMPI2C_ENABLE: Enable the FMPI2C peripheral
+ (+) __HAL_FMPI2C_DISABLE: Disable the FMPI2C peripheral
+ (+) __HAL_FMPI2C_GENERATE_NACK: Generate a Non-Acknowledge FMPI2C peripheral in Slave mode
+ (+) __HAL_FMPI2C_GET_FLAG: Check whether the specified FMPI2C flag is set or not
+ (+) __HAL_FMPI2C_CLEAR_FLAG: Clear the specified FMPI2C pending flag
+ (+) __HAL_FMPI2C_ENABLE_IT: Enable the specified FMPI2C interrupt
+ (+) __HAL_FMPI2C_DISABLE_IT: Disable the specified FMPI2C interrupt
+
+ [..]
+ (@) You can refer to the FMPI2C HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FMPI2C FMPI2C
+ * @brief FMPI2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Private_Define FMPI2C Private Define
+ * @{
+ */
+#define TIMING_CLEAR_MASK ((uint32_t)0xF0FFFFFFU) /*!< FMPI2C TIMING clear register Mask */
+#define FMPI2C_TIMEOUT_ADDR ((uint32_t)10000U) /*!< 10 s */
+#define FMPI2C_TIMEOUT_BUSY ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_DIR ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_RXNE ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_STOPF ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_TC ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_TCR ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_TXIS ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_FLAG ((uint32_t)25U) /*!< 25 ms */
+
+#define MAX_NBYTE_SIZE 255U
+#define SlaveAddr_SHIFT 7U
+#define SlaveAddr_MSK 0x06U
+
+/* Private define for @ref PreviousState usage */
+#define FMPI2C_STATE_MSK ((uint32_t)((HAL_FMPI2C_STATE_BUSY_TX | HAL_FMPI2C_STATE_BUSY_RX) & (~HAL_FMPI2C_STATE_READY))) /*!< Mask State define, keep only RX and TX bits */
+#define FMPI2C_STATE_NONE ((uint32_t)(HAL_FMPI2C_MODE_NONE)) /*!< Default Value */
+#define FMPI2C_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_TX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_RX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_TX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_RX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_MEM_BUSY_TX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_TX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_MEM_BUSY_RX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_RX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */
+
+
+/* Private define to centralize the enable/disable of Interrupts */
+#define FMPI2C_XFER_TX_IT ((uint32_t)0x00000001U)
+#define FMPI2C_XFER_RX_IT ((uint32_t)0x00000002U)
+#define FMPI2C_XFER_LISTEN_IT ((uint32_t)0x00000004U)
+
+#define FMPI2C_XFER_ERROR_IT ((uint32_t)0x00000011U)
+#define FMPI2C_XFER_CPLT_IT ((uint32_t)0x00000012U)
+#define FMPI2C_XFER_RELOAD_IT ((uint32_t)0x00000012U)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+#define FMPI2C_GET_DMA_REMAIN_DATA(__HANDLE__) ((((__HANDLE__)->State) == HAL_FMPI2C_STATE_BUSY_TX) ? \
+ ((uint32_t)((__HANDLE__)->hdmatx->Instance->NDTR)) : \
+ ((uint32_t)((__HANDLE__)->hdmarx->Instance->NDTR)))
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions
+ * @{
+ */
+/* Private functions to handle DMA transfer */
+static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAAbort(DMA_HandleTypeDef *hdma);
+
+/* Private functions to handle IT transfer */
+static void FMPI2C_ITAddrCplt (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+static void FMPI2C_ITMasterSequentialCplt (FMPI2C_HandleTypeDef *hfmpi2c);
+static void FMPI2C_ITSlaveSequentialCplt (FMPI2C_HandleTypeDef *hfmpi2c);
+static void FMPI2C_ITMasterCplt (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+static void FMPI2C_ITSlaveCplt (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+static void FMPI2C_ITListenCplt (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+static void FMPI2C_ITError (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+
+/* Private functions to handle IT transfer */
+static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_RequestMemoryRead (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions for FMPI2C transfer IRQ handler */
+static HAL_StatusTypeDef FMPI2C_Master_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef FMPI2C_Slave_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef FMPI2C_Master_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef FMPI2C_Slave_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources);
+
+/* Private functions to handle flags during polling transfer */
+static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_IsAcknowledgeFailed (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions to centralize the enable/disable of Interrupts */
+static HAL_StatusTypeDef FMPI2C_Enable_IRQ (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest);
+static HAL_StatusTypeDef FMPI2C_Disable_IRQ (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest);
+
+/* Private functions to flush TXDR register */
+static void FMPI2C_Flush_TXDR (FMPI2C_HandleTypeDef *hfmpi2c);
+
+/* Private functions to handle start, restart or stop a transfer */
+static void FMPI2C_TransferConfig (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Exported_Functions FMPI2C Exported Functions
+ * @{
+ */
+
+/** @defgroup FMPI2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ deinitialize the FMPI2Cx peripheral:
+
+ (+) User must Implement HAL_FMPI2C_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_FMPI2C_Init() to configure the selected device with
+ the selected configuration:
+ (++) Clock Timing
+ (++) Own Address 1
+ (++) Addressing mode (Master, Slave)
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) Own Address 2 Mask
+ (++) General call mode
+ (++) Nostretch mode
+
+ (+) Call the function HAL_FMPI2C_DeInit() to restore the default configuration
+ of the selected FMPI2Cx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FMPI2C according to the specified parameters
+ * in the FMPI2C_InitTypeDef and initialize the associated handle.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Check the FMPI2C handle allocation */
+ if(hfmpi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_FMPI2C_OWN_ADDRESS1(hfmpi2c->Init.OwnAddress1));
+ assert_param(IS_FMPI2C_ADDRESSING_MODE(hfmpi2c->Init.AddressingMode));
+ assert_param(IS_FMPI2C_DUAL_ADDRESS(hfmpi2c->Init.DualAddressMode));
+ assert_param(IS_FMPI2C_OWN_ADDRESS2(hfmpi2c->Init.OwnAddress2));
+ assert_param(IS_FMPI2C_OWN_ADDRESS2_MASK(hfmpi2c->Init.OwnAddress2Masks));
+ assert_param(IS_FMPI2C_GENERAL_CALL(hfmpi2c->Init.GeneralCallMode));
+ assert_param(IS_FMPI2C_NO_STRETCH(hfmpi2c->Init.NoStretchMode));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hfmpi2c->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_FMPI2C_MspInit(hfmpi2c);
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /*---------------------------- FMPI2Cx TIMINGR Configuration ------------------*/
+ /* Configure FMPI2Cx: Frequency range */
+ hfmpi2c->Instance->TIMINGR = hfmpi2c->Init.Timing & TIMING_CLEAR_MASK;
+
+ /*---------------------------- FMPI2Cx OAR1 Configuration ---------------------*/
+ /* Configure FMPI2Cx: Own Address1 and ack own address1 mode */
+ hfmpi2c->Instance->OAR1 &= ~FMPI2C_OAR1_OA1EN;
+ if(hfmpi2c->Init.OwnAddress1 != 0U)
+ {
+ if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_7BIT)
+ {
+ hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | hfmpi2c->Init.OwnAddress1);
+ }
+ else /* FMPI2C_ADDRESSINGMODE_10BIT */
+ {
+ hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | FMPI2C_OAR1_OA1MODE | hfmpi2c->Init.OwnAddress1);
+ }
+ }
+
+ /*---------------------------- FMPI2Cx CR2 Configuration ----------------------*/
+ /* Configure FMPI2Cx: Addressing Master mode */
+ if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
+ {
+ hfmpi2c->Instance->CR2 = (FMPI2C_CR2_ADD10);
+ }
+ /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+ hfmpi2c->Instance->CR2 |= (FMPI2C_CR2_AUTOEND | FMPI2C_CR2_NACK);
+
+ /*---------------------------- FMPI2Cx OAR2 Configuration ---------------------*/
+ /* Configure FMPI2Cx: Dual mode and Own Address2 */
+ hfmpi2c->Instance->OAR2 = (hfmpi2c->Init.DualAddressMode | hfmpi2c->Init.OwnAddress2 | (hfmpi2c->Init.OwnAddress2Masks << 8));
+
+ /*---------------------------- FMPI2Cx CR1 Configuration ----------------------*/
+ /* Configure FMPI2Cx: Generalcall and NoStretch mode */
+ hfmpi2c->Instance->CR1 = (hfmpi2c->Init.GeneralCallMode | hfmpi2c->Init.NoStretchMode);
+
+ /* Enable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the FMPI2C peripheral.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_DeInit(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Check the FMPI2C handle allocation */
+ if(hfmpi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the FMPI2C Peripheral Clock */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_FMPI2C_MspDeInit(hfmpi2c);
+
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+ hfmpi2c->State = HAL_FMPI2C_STATE_RESET;
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FMPI2C MSP.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the FMPI2C MSP.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the FMPI2C data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated FMPI2C IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_FMPI2C_Master_Transmit()
+ (++) HAL_FMPI2C_Master_Receive()
+ (++) HAL_FMPI2C_Slave_Transmit()
+ (++) HAL_FMPI2C_Slave_Receive()
+ (++) HAL_FMPI2C_Mem_Write()
+ (++) HAL_FMPI2C_Mem_Read()
+ (++) HAL_FMPI2C_IsDeviceReady()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_FMPI2C_Master_Transmit_IT()
+ (++) HAL_FMPI2C_Master_Receive_IT()
+ (++) HAL_FMPI2C_Slave_Transmit_IT()
+ (++) HAL_FMPI2C_Slave_Receive_IT()
+ (++) HAL_FMPI2C_Master_Sequential_Transmit_IT()
+ (++) HAL_FMPI2C_Master_Sequential_Receive_IT()
+ (++) HAL_FMPI2C_Slave_Sequential_Transmit_IT()
+ (++) HAL_FMPI2C_Slave_Sequential_Receive_IT()
+ (++) HAL_FMPI2C_Mem_Write_IT()
+ (++) HAL_FMPI2C_Mem_Read_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_FMPI2C_Master_Transmit_DMA()
+ (++) HAL_FMPI2C_Master_Receive_DMA()
+ (++) HAL_FMPI2C_Slave_Transmit_DMA()
+ (++) HAL_FMPI2C_Slave_Receive_DMA()
+ (++) HAL_FMPI2C_Mem_Write_DMA()
+ (++) HAL_FMPI2C_Mem_Read_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_FMPI2C_MemTxCpltCallback()
+ (++) HAL_FMPI2C_MemRxCpltCallback()
+ (++) HAL_FMPI2C_MasterTxCpltCallback()
+ (++) HAL_FMPI2C_MasterRxCpltCallback()
+ (++) HAL_FMPI2C_SlaveTxCpltCallback()
+ (++) HAL_FMPI2C_SlaveRxCpltCallback()
+ (++) HAL_FMPI2C_ErrorCallback()
+ (++) HAL_FMPI2C_AbortCpltCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits in master mode an amount of data in blocking mode.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_WRITE);
+ }
+
+ while(hfmpi2c->XferSize > 0)
+ {
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferCount--;
+ hfmpi2c->XferSize--;
+
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount!=0))
+ {
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives in master mode an amount of data in blocking mode.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+ }
+
+ while(hfmpi2c->XferSize > 0)
+ {
+ /* Wait until RXNE flag is set */
+ if(FMPI2C_WaitOnRXNEFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount != 0))
+ {
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmits in slave mode an amount of data in blocking mode.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+ /* If 10bit addressing mode is selected */
+ if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+ }
+
+ /* Wait until DIR flag is set Transmitter mode */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while(hfmpi2c->XferCount > 0)
+ {
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Normal use case for Transmitter mode */
+ /* A NACK is generated to confirm the end of transfer */
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in blocking mode
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+ /* Wait until DIR flag is reset Receiver mode */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while(hfmpi2c->XferCount > 0)
+ {
+ /* Wait until RXNE flag is set */
+ if(FMPI2C_WaitOnRXNEFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ /* Store Last receive data if any */
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET)
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferCount--;
+ }
+
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT | FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with DMA
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_WRITE);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with DMA
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ if(hfmpi2c->XferSize > 0)
+ {
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_DMA;
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMASlaveTransmitCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with DMA
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_DMA;
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMASlaveReceiveCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in blocking mode to a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+
+ do
+ {
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferCount--;
+ hfmpi2c->XferSize--;
+
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount!=0))
+ {
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+
+ }while(hfmpi2c->XferCount > 0);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in blocking mode from a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+ }
+
+ do
+ {
+ /* Wait until RXNE flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount != 0))
+ {
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+ }while(hfmpi2c->XferCount > 0);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0;
+ uint32_t xfermode = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_NO_STARTSTOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0;
+ uint32_t xfermode = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0;
+ uint32_t xfermode = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0;
+ uint32_t xfermode = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
+
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param Trials Number of trials
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ __IO uint32_t FMPI2C_Trials = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ do
+ {
+ /* Generate Start */
+ hfmpi2c->Instance->CR2 = FMPI2C_GENERATE_START(hfmpi2c->Init.AddressingMode,DevAddress);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set or a NACK flag is set*/
+ tickstart = HAL_GetTick();
+ while((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET) && (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == RESET) && (hfmpi2c->State != HAL_FMPI2C_STATE_TIMEOUT))
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Device is ready */
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check if the NACKF flag has not been set */
+ if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == RESET)
+ {
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Device is ready */
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Clear STOP Flag, auto generated with autoend*/
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+ }
+
+ /* Check if the maximum allowed number of trials has been reached */
+ if (FMPI2C_Trials++ == Trials)
+ {
+ /* Generate Stop */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
+
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+ }
+ }while(FMPI2C_Trials < Trials);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in master FMPI2C mode an amount of data in non-blocking mode with Interrupt.
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0;
+ uint32_t xferrequest = FMPI2C_GENERATE_START_WRITE;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = XferOptions;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ /* If size > MAX_NBYTE_SIZE, use reload mode */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = hfmpi2c->XferOptions;
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if(hfmpi2c->PreviousState == FMPI2C_STATE_SLAVE_BUSY_TX)
+ {
+ xferrequest = FMPI2C_NO_STARTSTOP;
+ }
+ }
+
+
+ /* Send Slave Address and set NBYTES to write */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in master FMPI2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0;
+ uint32_t xferrequest = FMPI2C_GENERATE_START_READ;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = XferOptions;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ /* If hfmpi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = hfmpi2c->XferOptions;
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if(hfmpi2c->PreviousState == FMPI2C_STATE_MASTER_BUSY_RX)
+ {
+ xferrequest = FMPI2C_NO_STARTSTOP;
+ }
+ }
+
+ /* Send Slave Address and set NBYTES to read */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress, hfmpi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in slave/device FMPI2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_TX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX_LISTEN;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = XferOptions;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ if(FMPI2C_GET_DIR(hfmpi2c) == FMPI2C_DIRECTION_RECEIVE)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT | FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Sequential receive in slave/device FMPI2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX_LISTEN;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = XferOptions;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ if(FMPI2C_GET_DIR(hfmpi2c) == FMPI2C_DIRECTION_TRANSMIT)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Enable the Address listen mode with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_EnableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ /* Enable the Address Match interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable the Address listen mode with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_DisableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Declaration of tmp to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+
+ /* Disable Address listen mode only if a transfer is not ongoing */
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN)
+ {
+ tmp = (uint32_t)(hfmpi2c->State) & FMPI2C_STATE_MSK;
+ hfmpi2c->PreviousState = tmp | (uint32_t)(hfmpi2c->Mode);
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+ hfmpi2c->XferISR = NULL;
+
+ /* Disable the Address Match interrupt */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Abort a master FMPI2C IT or DMA process communication with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Abort_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress)
+{
+ if(hfmpi2c->Mode == HAL_FMPI2C_MODE_MASTER)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ /* Set State at HAL_FMPI2C_STATE_ABORT */
+ hfmpi2c->State = HAL_FMPI2C_STATE_ABORT;
+
+ /* Set NBYTES to 1 to generate a dummy read on FMPI2C peripheral */
+ /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, 1, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_STOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wrong usage of abort function */
+ /* This function should be used only in case of abort monitored by master device */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+
+/**
+ * @brief This function handles FMPI2C event interrupt request.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Get current IT Flags and IT sources value */
+ uint32_t itflags = READ_REG(hfmpi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hfmpi2c->Instance->CR1);
+
+ /* FMPI2C events treatment -------------------------------------*/
+ if(hfmpi2c->XferISR != NULL)
+ {
+ hfmpi2c->XferISR(hfmpi2c, itflags, itsources);
+ }
+}
+
+/**
+ * @brief This function handles FMPI2C error interrupt request.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ uint32_t itflags = READ_REG(hfmpi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hfmpi2c->Instance->CR1);
+
+ /* FMPI2C Bus error interrupt occurred ------------------------------------*/
+ if(((itflags & FMPI2C_FLAG_BERR) != RESET) && ((itsources & FMPI2C_IT_ERRI) != RESET))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_BERR);
+ }
+
+ /* FMPI2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+ if(((itflags & FMPI2C_FLAG_OVR) != RESET) && ((itsources & FMPI2C_IT_ERRI) != RESET))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_OVR;
+
+ /* Clear OVR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_OVR);
+ }
+
+ /* FMPI2C Arbitration Loss error interrupt occurred -------------------------------------*/
+ if(((itflags & FMPI2C_FLAG_ARLO) != RESET) && ((itsources & FMPI2C_IT_ERRI) != RESET))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ARLO);
+ }
+
+ /* Call the Error Callback in case of Error detected */
+ if((hfmpi2c->ErrorCode & (HAL_FMPI2C_ERROR_BERR | HAL_FMPI2C_ERROR_OVR | HAL_FMPI2C_ERROR_ARLO)) != HAL_FMPI2C_ERROR_NONE)
+ {
+ FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MasterTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MasterRxCpltCallback could be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_SlaveTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_SlaveRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Address Match callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param TransferDirection: Master request Transfer Direction (Write/Read), value of @ref FMPI2C_XFEROPTIONS
+ * @param AddrMatchCode: Address Match Code
+ * @retval None
+ */
+__weak void HAL_FMPI2C_AddrCallback(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+ UNUSED(TransferDirection);
+ UNUSED(AddrMatchCode);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_AddrCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Listen Complete callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_ListenCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_ListenCpltCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Tx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MemTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Rx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MemRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FMPI2C error callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FMPI2C abort callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_AbortCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @brief Peripheral State, Mode and Error functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State, Mode and Error functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the FMPI2C handle state.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval HAL state
+ */
+HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Return FMPI2C handle state */
+ return hfmpi2c->State;
+}
+
+/**
+ * @brief Returns the FMPI2C Master, Slave, Memory or no mode.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for FMPI2C module
+ * @retval HAL mode
+ */
+HAL_FMPI2C_ModeTypeDef HAL_FMPI2C_GetMode(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ return hfmpi2c->Mode;
+}
+
+/**
+* @brief Return the FMPI2C error code.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+* @retval FMPI2C Error Code
+*/
+uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ return hfmpi2c->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Master_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ if(((ITFlags & FMPI2C_FLAG_AF) != RESET) && ((ITSources & FMPI2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ /* No need to generate STOP, it is automatically done */
+ /* Error callback will be send during stop flag treatment */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+ }
+ else if(((ITFlags & FMPI2C_FLAG_RXNE) != RESET) && ((ITSources & FMPI2C_IT_RXI) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TXIS) != RESET) && ((ITSources & FMPI2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TCR) != RESET) && ((ITSources & FMPI2C_IT_TCI) != RESET))
+ {
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount != 0))
+ {
+ devaddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, devaddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ if(hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME)
+ {
+ FMPI2C_TransferConfig(hfmpi2c, devaddress, hfmpi2c->XferSize, hfmpi2c->XferOptions, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ FMPI2C_TransferConfig(hfmpi2c, devaddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+ }
+ else
+ {
+ /* Call TxCpltCallback() if no stop mode is set */
+ if((FMPI2C_GET_STOP_MODE(hfmpi2c) != FMPI2C_AUTOEND_MODE)&&(hfmpi2c->Mode == HAL_FMPI2C_MODE_MASTER))
+ {
+ /* Call FMPI2C Master Sequential complete process */
+ FMPI2C_ITMasterSequentialCplt(hfmpi2c);
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE);
+ }
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TC) != RESET) && ((ITSources & FMPI2C_IT_TCI) != RESET))
+ {
+ if(hfmpi2c->XferCount == 0)
+ {
+ if((FMPI2C_GET_STOP_MODE(hfmpi2c) != FMPI2C_AUTOEND_MODE)&&(hfmpi2c->Mode == HAL_FMPI2C_MODE_MASTER))
+ {
+ /* Call FMPI2C Master Sequential complete process */
+ FMPI2C_ITMasterSequentialCplt(hfmpi2c);
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TC flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE);
+ }
+ }
+
+ if(((ITFlags & FMPI2C_FLAG_STOPF) != RESET) && ((ITSources & FMPI2C_IT_STOPI) != RESET))
+ {
+ /* Call FMPI2C Master complete process */
+ FMPI2C_ITMasterCplt(hfmpi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Slave_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hfmpi2c);
+
+ if(((ITFlags & FMPI2C_FLAG_AF) != RESET) && ((ITSources & FMPI2C_IT_NACKI) != RESET))
+ {
+ /* Check that FMPI2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0*/
+ /* So clear Flag NACKF only */
+ if(hfmpi2c->XferCount == 0)
+ {
+ if(((hfmpi2c->XferOptions == FMPI2C_FIRST_AND_LAST_FRAME) || (hfmpi2c->XferOptions == FMPI2C_LAST_FRAME)) && \
+ (hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN))
+ {
+ /* Call FMPI2C Listen complete process */
+ FMPI2C_ITListenCplt(hfmpi2c, ITFlags);
+ }
+ else if((hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME) && (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN))
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+
+ /* Last Byte is Transmitted */
+ /* Call FMPI2C Slave Sequential complete process */
+ FMPI2C_ITSlaveSequentialCplt(hfmpi2c);
+ }
+ else
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+ }
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_RXNE) != RESET) && ((ITSources & FMPI2C_IT_RXI) != RESET))
+ {
+ if(hfmpi2c->XferCount > 0)
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+ }
+
+ if((hfmpi2c->XferCount == 0) && \
+ (hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME))
+ {
+ /* Call FMPI2C Slave Sequential complete process */
+ FMPI2C_ITSlaveSequentialCplt(hfmpi2c);
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_ADDR) != RESET) && ((ITSources & FMPI2C_IT_ADDRI) != RESET))
+ {
+ FMPI2C_ITAddrCplt(hfmpi2c, ITFlags);
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TXIS) != RESET) && ((ITSources & FMPI2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR only if XferCount not reach "0" */
+ /* A TXIS flag can be set, during STOP treatment */
+ /* Check if all Datas have already been sent */
+ /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
+ if(hfmpi2c->XferCount > 0)
+ {
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferCount--;
+ hfmpi2c->XferSize--;
+ }
+ else
+ {
+ if((hfmpi2c->XferOptions == FMPI2C_NEXT_FRAME) || (hfmpi2c->XferOptions == FMPI2C_FIRST_FRAME))
+ {
+ /* Last Byte is Transmitted */
+ /* Call FMPI2C Slave Sequential complete process */
+ FMPI2C_ITSlaveSequentialCplt(hfmpi2c);
+ }
+ }
+ }
+
+ /* Check if STOPF is set */
+ if(((ITFlags & FMPI2C_FLAG_STOPF) != RESET) && ((ITSources & FMPI2C_IT_STOPI) != RESET))
+ {
+ /* Call FMPI2C Slave complete process */
+ FMPI2C_ITSlaveCplt(hfmpi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Master_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0;
+ uint32_t xfermode = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ if(((ITFlags & FMPI2C_FLAG_AF) != RESET) && ((ITSources & FMPI2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+
+ /* No need to generate STOP, it is automatically done */
+ /* But enable STOP interrupt, to treat it */
+ /* Error callback will be send during stop flag treatment */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT);
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TCR) != RESET) && ((ITSources & FMPI2C_IT_TCI) != RESET))
+ {
+ /* Disable TC interrupt */
+ __HAL_FMPI2C_DISABLE_IT(hfmpi2c, FMPI2C_IT_TCI);
+
+ if(hfmpi2c->XferCount != 0)
+ {
+ /* Recover Slave address */
+ devaddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+ /* Prepare the new XferSize to transfer */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Set the new XferSize in Nbytes register */
+ FMPI2C_TransferConfig(hfmpi2c, devaddress, hfmpi2c->XferSize, xfermode, FMPI2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Enable DMA Request */
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX)
+ {
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE);
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_STOPF) != RESET) && ((ITSources & FMPI2C_IT_STOPI) != RESET))
+ {
+ /* Call FMPI2C Master complete process */
+ FMPI2C_ITMasterCplt(hfmpi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Slave_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hfmpi2c);
+
+ if(((ITFlags & FMPI2C_FLAG_AF) != RESET) && ((ITSources & FMPI2C_IT_NACKI) != RESET))
+ {
+ /* Check that FMPI2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0 */
+ /* So clear Flag NACKF only */
+ if(FMPI2C_GET_DMA_REMAIN_DATA(hfmpi2c) == 0)
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_ADDR) != RESET) && ((ITSources & FMPI2C_IT_ADDRI) != RESET))
+ {
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR);
+ }
+ else if(((ITFlags & FMPI2C_FLAG_STOPF) != RESET) && ((ITSources & FMPI2C_IT_STOPI) != RESET))
+ {
+ /* Call FMPI2C Slave complete process */
+ FMPI2C_ITSlaveCplt(hfmpi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for write request.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress,MemAddSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == FMPI2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for read request.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_RequestMemoryRead(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress,MemAddSize, FMPI2C_SOFTEND_MODE, FMPI2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == FMPI2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TC flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief FMPI2C Address complete process callback.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void FMPI2C_ITAddrCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags)
+{
+ uint8_t transferdirection = 0;
+ uint16_t slaveaddrcode = 0;
+ uint16_t ownadd1code = 0;
+ uint16_t ownadd2code = 0;
+
+ /* In case of Listen state, need to inform upper layer of address match code event */
+ if((hfmpi2c->State & HAL_FMPI2C_STATE_LISTEN) == HAL_FMPI2C_STATE_LISTEN)
+ {
+ transferdirection = FMPI2C_GET_DIR(hfmpi2c);
+ slaveaddrcode = FMPI2C_GET_ADDR_MATCH(hfmpi2c);
+ ownadd1code = FMPI2C_GET_OWN_ADDRESS1(hfmpi2c);
+ ownadd2code = FMPI2C_GET_OWN_ADDRESS2(hfmpi2c);
+
+ /* If 10bits addressing mode is selected */
+ if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
+ {
+ if((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK))
+ {
+ slaveaddrcode = ownadd1code;
+ hfmpi2c->AddrEventCount++;
+ if(hfmpi2c->AddrEventCount == 2)
+ {
+ /* Reset Address Event counter */
+ hfmpi2c->AddrEventCount = 0;
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call Slave Addr callback */
+ HAL_FMPI2C_AddrCallback(hfmpi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ else
+ {
+ slaveaddrcode = ownadd2code;
+
+ /* Disable ADDR Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call Slave Addr callback */
+ HAL_FMPI2C_AddrCallback(hfmpi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* else 7 bits addressing mode is selected */
+ else
+ {
+ /* Disable ADDR Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call Slave Addr callback */
+ HAL_FMPI2C_AddrCallback(hfmpi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* Else clear address flag only */
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Master sequential complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @retval None
+ */
+static void FMPI2C_ITMasterSequentialCplt(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Reset FMPI2C handle mode */
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* No Generate Stop, to permit restart mode */
+ /* The stop will be done at the end of transfer, when FMPI2C_AUTOEND_MODE enable */
+ if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_TX;
+ hfmpi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c);
+ }
+ /* hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX */
+ else
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_RX;
+ hfmpi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Slave sequential complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @retval None
+ */
+static void FMPI2C_ITSlaveSequentialCplt(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Reset FMPI2C handle mode */
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Remove HAL_FMPI2C_STATE_SLAVE_BUSY_TX, keep only HAL_FMPI2C_STATE_LISTEN */
+ hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN;
+ hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_TX;
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Tx complete callback to inform upper layer of the end of transmit process */
+ HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c);
+ }
+
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Remove HAL_FMPI2C_STATE_SLAVE_BUSY_RX, keep only HAL_FMPI2C_STATE_LISTEN */
+ hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN;
+ hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_RX;
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Rx complete callback to inform upper layer of the end of receive process */
+ HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Master complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void FMPI2C_ITMasterCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ /* Reset handle parameters */
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->XferISR = NULL;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+
+ if((ITFlags & FMPI2C_FLAG_AF) != RESET)
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set acknowledge error code */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT| FMPI2C_XFER_RX_IT);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ if((hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE) || (hfmpi2c->State == HAL_FMPI2C_STATE_ABORT))
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode);
+ }
+ /* hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX */
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ if (hfmpi2c->Mode == HAL_FMPI2C_MODE_MEM)
+ {
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_MemTxCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c);
+ }
+ }
+ /* hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX */
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ if (hfmpi2c->Mode == HAL_FMPI2C_MODE_MEM)
+ {
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ HAL_FMPI2C_MemRxCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c);
+ }
+ }
+}
+
+/**
+ * @brief FMPI2C Slave complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void FMPI2C_ITSlaveCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+ /* Disable all interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_TX_IT | FMPI2C_XFER_RX_IT);
+
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+
+ /* If a DMA is ongoing, Update handle size context */
+ if(((hfmpi2c->Instance->CR1 & FMPI2C_CR1_TXDMAEN) == FMPI2C_CR1_TXDMAEN) ||
+ ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_RXDMAEN) == FMPI2C_CR1_RXDMAEN))
+ {
+ hfmpi2c->XferCount = FMPI2C_GET_DMA_REMAIN_DATA(hfmpi2c);
+ }
+
+ /* All data are not transferred, so set error code accordingly */
+ if(hfmpi2c->XferCount != 0)
+ {
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+
+ /* Store Last receive data if any */
+ if(((ITFlags & FMPI2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+
+ if((hfmpi2c->XferSize > 0))
+ {
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+ }
+
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+ hfmpi2c->XferISR = NULL;
+
+ if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN)
+ {
+ /* Call FMPI2C Listen complete process */
+ FMPI2C_ITListenCplt(hfmpi2c, ITFlags);
+ }
+ }
+ else if(hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME)
+ {
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_FMPI2C_ListenCpltCallback(hfmpi2c);
+ }
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Slave Rx Complete callback */
+ HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Slave Tx Complete callback */
+ HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Listen complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void FMPI2C_ITListenCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags)
+{
+ /* Reset handle parameters */
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+ hfmpi2c->XferISR = NULL;
+
+ /* Store Last receive data if any */
+ if(((ITFlags & FMPI2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+
+ if((hfmpi2c->XferSize > 0))
+ {
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+ }
+
+ /* Disable all Interrupts*/
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT | FMPI2C_XFER_TX_IT);
+
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_FMPI2C_ListenCpltCallback(hfmpi2c);
+}
+
+/**
+ * @brief FMPI2C interrupts error process.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ErrorCode Error code to handle.
+ * @retval None
+ */
+static void FMPI2C_ITError(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ErrorCode)
+{
+ /* Reset handle parameters */
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferCount = 0;
+
+ /* Set new error code */
+ hfmpi2c->ErrorCode |= ErrorCode;
+
+ /* Disable Interrupts */
+ if((hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN) ||
+ (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN) ||
+ (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* Disable all interrupts, except interrupts related to LISTEN state */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_TX_IT);
+
+ /* keep HAL_FMPI2C_STATE_LISTEN if set */
+ hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN;
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+ }
+ else
+ {
+ /* Disable all interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT | FMPI2C_XFER_TX_IT);
+
+ /* If state is an abort treatment on goind, don't change state */
+ /* This change will be do later */
+ if(hfmpi2c->State != HAL_FMPI2C_STATE_ABORT)
+ {
+ /* Set HAL_FMPI2C_STATE_READY */
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ }
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->XferISR = NULL;
+ }
+
+ /* Abort DMA TX transfer if any */
+ if((hfmpi2c->Instance->CR1 & FMPI2C_CR1_TXDMAEN) == FMPI2C_CR1_TXDMAEN)
+ {
+ hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
+
+ /* Set the FMPI2C DMA Abort callback :
+ will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */
+ hfmpi2c->hdmatx->XferAbortCallback = FMPI2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ if(HAL_DMA_Abort_IT(hfmpi2c->hdmatx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hfmpi2c->hdmatx->XferAbortCallback(hfmpi2c->hdmatx);
+ }
+ }
+ /* Abort DMA RX transfer if any */
+ else if((hfmpi2c->Instance->CR1 & FMPI2C_CR1_RXDMAEN) == FMPI2C_CR1_RXDMAEN)
+ {
+ hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
+
+ /* Set the FMPI2C DMA Abort callback :
+ will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */
+ hfmpi2c->hdmarx->XferAbortCallback = FMPI2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ if(HAL_DMA_Abort_IT(hfmpi2c->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hfmpi2c->hdmarx->XferAbortCallback(hfmpi2c->hdmarx);
+ }
+ }
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_ABORT)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_AbortCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_ErrorCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Tx data register flush process.
+ * @param hfmpi2c FMPI2C handle.
+ * @retval None
+ */
+static void FMPI2C_Flush_TXDR(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* If a pending TXIS flag is set */
+ /* Write a dummy data in TXDR to clear it */
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) != RESET)
+ {
+ hfmpi2c->Instance->TXDR = 0x00;
+ }
+
+ /* Flush TX register if not empty */
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXE) == RESET)
+ {
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_TXE);
+ }
+}
+
+/**
+ * @brief DMA FMPI2C master transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if(hfmpi2c->XferCount == 0)
+ {
+ /* Enable STOP interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ }
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)hfmpi2c->pBuffPtr, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+ /* Enable TC interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA FMPI2C slave transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA FMPI2C master receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if(hfmpi2c->XferCount == 0)
+ {
+ /* Enable STOP interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ }
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)hfmpi2c->pBuffPtr, hfmpi2c->XferSize);
+
+ /* Enable TC interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA FMPI2C slave receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA FMPI2C communication error callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+ FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_DMA);
+}
+
+/**
+ * @brief DMA FMPI2C communication abort callback
+ * (To be called at end of DMA Abort procedure).
+ * @param hdma: DMA handle.
+ * @retval None
+ */
+static void FMPI2C_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ /* Reset AbortCpltCallback */
+ hfmpi2c->hdmatx->XferAbortCallback = NULL;
+ hfmpi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Check if come from abort from user */
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_ABORT)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_AbortCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_ErrorCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief This function handles FMPI2C Communication Timeout.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Flag Specifies the FMPI2C flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, Flag) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles FMPI2C Communication Timeout for specific usage of TXIS flag.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles FMPI2C Communication Timeout for specific usage of STOP flag.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles FMPI2C Communication Timeout for specific usage of RXNE flag.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check if a STOPF is detected */
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
+ {
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Acknowledge failed detection during an FMPI2C Communication.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_IsAcknowledgeFailed(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)
+ {
+ /* Wait until STOP Flag is reset */
+ /* AutoEnd should be initiate after AF */
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear NACKF Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_AF;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles FMPI2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+ * @param hfmpi2c FMPI2C handle.
+ * @param DevAddress Specifies the slave address to be programmed.
+ * @param Size Specifies the number of bytes to be programmed.
+ * This parameter must be a value between 0 and 255.
+ * @param Mode New state of the FMPI2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_RELOAD_MODE Enable Reload mode .
+ * @arg @ref FMPI2C_AUTOEND_MODE Enable Automatic end mode.
+ * @arg @ref FMPI2C_SOFTEND_MODE Enable Software end mode.
+ * @param Request New state of the FMPI2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_NO_STARTSTOP Don't Generate stop and start condition.
+ * @arg @ref FMPI2C_GENERATE_STOP Generate stop condition (Size should be set to 0).
+ * @arg @ref FMPI2C_GENERATE_START_READ Generate Restart for read request.
+ * @arg @ref FMPI2C_GENERATE_START_WRITE Generate Restart for write request.
+ * @retval None
+ */
+static void FMPI2C_TransferConfig(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_TRANSFER_MODE(Mode));
+ assert_param(IS_TRANSFER_REQUEST(Request));
+
+ /* Get the CR2 register value */
+ tmpreg = hfmpi2c->Instance->CR2;
+
+ /* clear tmpreg specific bits */
+ tmpreg &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_AUTOEND | FMPI2C_CR2_RD_WRN | FMPI2C_CR2_START | FMPI2C_CR2_STOP));
+
+ /* update tmpreg */
+ tmpreg |= (uint32_t)(((uint32_t)DevAddress & FMPI2C_CR2_SADD) | (((uint32_t)Size << 16 ) & FMPI2C_CR2_NBYTES) | \
+ (uint32_t)Mode | (uint32_t)Request);
+
+ /* update CR2 register */
+ hfmpi2c->Instance->CR2 = tmpreg;
+}
+
+/**
+ * @brief Manage the enabling of Interrupts.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param InterruptRequest Value of @ref FMPI2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Enable_IRQ(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0;
+
+ if((hfmpi2c->XferISR == FMPI2C_Master_ISR_DMA) || \
+ (hfmpi2c->XferISR == FMPI2C_Slave_ISR_DMA))
+ {
+ if((InterruptRequest & FMPI2C_XFER_LISTEN_IT) == FMPI2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK and ADDR interrupts */
+ tmpisr |= FMPI2C_IT_ADDRI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_ERROR_IT) == FMPI2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_NACKI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_CPLT_IT) == FMPI2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_RELOAD_IT) == FMPI2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= FMPI2C_IT_TCI;
+ }
+ }
+ else
+ {
+ if((InterruptRequest & FMPI2C_XFER_LISTEN_IT) == FMPI2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK, and ADDR interrupts */
+ tmpisr |= FMPI2C_IT_ADDRI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_TX_IT) == FMPI2C_XFER_TX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+ tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_TXI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_RX_IT) == FMPI2C_XFER_RX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and TXI interrupts */
+ tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_RXI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_CPLT_IT) == FMPI2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI;
+ }
+ }
+
+ /* Enable interrupts only at the end */
+ /* to avoid the risk of FMPI2C interrupt handle execution before */
+ /* all interrupts requested done */
+ __HAL_FMPI2C_ENABLE_IT(hfmpi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Manage the disabling of Interrupts.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param InterruptRequest Value of @ref FMPI2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Disable_IRQ(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0;
+
+ if((InterruptRequest & FMPI2C_XFER_TX_IT) == FMPI2C_XFER_TX_IT)
+ {
+ /* Disable TC and TXI interrupts */
+ tmpisr |= FMPI2C_IT_TCI | FMPI2C_IT_TXI;
+
+ if((hfmpi2c->State & HAL_FMPI2C_STATE_LISTEN) != HAL_FMPI2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_RX_IT) == FMPI2C_XFER_RX_IT)
+ {
+ /* Disable TC and RXI interrupts */
+ tmpisr |= FMPI2C_IT_TCI | FMPI2C_IT_RXI;
+
+ if((hfmpi2c->State & HAL_FMPI2C_STATE_LISTEN) != HAL_FMPI2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_LISTEN_IT) == FMPI2C_XFER_LISTEN_IT)
+ {
+ /* Disable ADDR, NACK and STOP interrupts */
+ tmpisr |= FMPI2C_IT_ADDRI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_ERROR_IT) == FMPI2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_NACKI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_CPLT_IT) == FMPI2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_RELOAD_IT) == FMPI2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= FMPI2C_IT_TCI;
+ }
+
+ /* Disable interrupts only at the end */
+ /* to avoid a breaking situation like at "t" time */
+ /* all disable interrupts request are not done */
+ __HAL_FMPI2C_DISABLE_IT(hfmpi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,719 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FMPI2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FMPI2C_H
+#define __STM32F4xx_HAL_FMPI2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMPI2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Exported_Types FMPI2C Exported Types
+ * @{
+ */
+
+/** @defgroup FMPI2C_Configuration_Structure_definition FMPI2C Configuration Structure definition
+ * @brief FMPI2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the FMPI2C_TIMINGR_register value.
+ This parameter calculated by referring to FMPI2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref FMPI2C_ADDRESSING_MODE */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref FMPI2C_DUAL_ADDRESSING_MODE */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref FMPI2C_OWN_ADDRESS2_MASKS */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref FMPI2C_GENERAL_CALL_ADDRESSING_MODE */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref FMPI2C_NOSTRETCH_MODE */
+
+}FMPI2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @note HAL FMPI2C State value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : Abort (Abort user request on going)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized and ready to use. HAL FMPI2C Init function called)
+ * b4 (not used)
+ * x : Should be set to 0
+ * b3
+ * 0 : Ready or Busy (No Listen mode ongoing)
+ * 1 : Listen (IP in Address Listen Mode)
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * @{
+ */
+typedef enum
+{
+ HAL_FMPI2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_FMPI2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
+ HAL_FMPI2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
+ HAL_FMPI2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
+ HAL_FMPI2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_FMPI2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
+ HAL_FMPI2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
+ process is ongoing */
+ HAL_FMPI2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
+ process is ongoing */
+ HAL_FMPI2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
+ HAL_FMPI2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
+ HAL_FMPI2C_STATE_ERROR = 0xE0U /*!< Error */
+
+}HAL_FMPI2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+ * @brief HAL Mode structure definition
+ * @note HAL FMPI2C Mode value coding follow below described bitmap :
+ * b7 (not used)
+ * x : Should be set to 0
+ * b6
+ * 0 : None
+ * 1 : Memory (HAL FMPI2C communication is in Memory Mode)
+ * b5
+ * 0 : None
+ * 1 : Slave (HAL FMPI2C communication is in Slave Mode)
+ * b4
+ * 0 : None
+ * 1 : Master (HAL FMPI2C communication is in Master Mode)
+ * b3-b2-b1-b0 (not used)
+ * xxxx : Should be set to 0000
+ * @{
+ */
+typedef enum
+{
+ HAL_FMPI2C_MODE_NONE = 0x00U, /*!< No FMPI2C communication on going */
+ HAL_FMPI2C_MODE_MASTER = 0x10U, /*!< FMPI2C communication is in Master Mode */
+ HAL_FMPI2C_MODE_SLAVE = 0x20U, /*!< FMPI2C communication is in Slave Mode */
+ HAL_FMPI2C_MODE_MEM = 0x40U /*!< FMPI2C communication is in Memory Mode */
+
+}HAL_FMPI2C_ModeTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Error_Code_definition FMPI2C Error Code definition
+ * @brief FMPI2C Error Code definition
+ * @{
+ */
+#define HAL_FMPI2C_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_FMPI2C_ERROR_BERR ((uint32_t)0x00000001U) /*!< BERR error */
+#define HAL_FMPI2C_ERROR_ARLO ((uint32_t)0x00000002U) /*!< ARLO error */
+#define HAL_FMPI2C_ERROR_AF ((uint32_t)0x00000004U) /*!< ACKF error */
+#define HAL_FMPI2C_ERROR_OVR ((uint32_t)0x00000008U) /*!< OVR error */
+#define HAL_FMPI2C_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_FMPI2C_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout error */
+#define HAL_FMPI2C_ERROR_SIZE ((uint32_t)0x00000040U) /*!< Size Management error */
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_handle_Structure_definition FMPI2C handle Structure definition
+ * @brief FMPI2C handle Structure definition
+ * @{
+ */
+typedef struct __FMPI2C_HandleTypeDef
+{
+ FMPI2C_TypeDef *Instance; /*!< FMPI2C registers base address */
+
+ FMPI2C_InitTypeDef Init; /*!< FMPI2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to FMPI2C transfer buffer */
+
+ uint16_t XferSize; /*!< FMPI2C transfer size */
+
+ __IO uint16_t XferCount; /*!< FMPI2C transfer counter */
+
+ __IO uint32_t XferOptions; /*!< FMPI2C sequantial transfer options, this parameter can
+ be a value of @ref FMPI2C_XFEROPTIONS */
+
+ __IO uint32_t PreviousState; /*!< FMPI2C communication Previous state */
+
+ HAL_StatusTypeDef (*XferISR)(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources); /*!< FMPI2C transfer IRQ handler function pointer */
+
+ DMA_HandleTypeDef *hdmatx; /*!< FMPI2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< FMPI2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< FMPI2C locking object */
+
+ __IO HAL_FMPI2C_StateTypeDef State; /*!< FMPI2C communication state */
+
+ __IO HAL_FMPI2C_ModeTypeDef Mode; /*!< FMPI2C communication mode */
+
+ __IO uint32_t ErrorCode; /*!< FMPI2C Error code */
+
+ __IO uint32_t AddrEventCount; /*!< FMPI2C Address Event counter */
+}FMPI2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Exported_Constants FMPI2C Exported Constants
+ * @{
+ */
+
+/** @defgroup FMPI2C_XFEROPTIONS FMPI2C Sequential Transfer Options
+ * @{
+ */
+#define FMPI2C_NO_OPTION_FRAME ((uint32_t)0xFFFF0000U)
+#define FMPI2C_FIRST_FRAME ((uint32_t)FMPI2C_SOFTEND_MODE)
+#define FMPI2C_NEXT_FRAME ((uint32_t)(FMPI2C_RELOAD_MODE | FMPI2C_SOFTEND_MODE))
+#define FMPI2C_FIRST_AND_LAST_FRAME ((uint32_t)FMPI2C_AUTOEND_MODE)
+#define FMPI2C_LAST_FRAME ((uint32_t)FMPI2C_AUTOEND_MODE)
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_ADDRESSING_MODE FMPI2C Addressing Mode
+ * @{
+ */
+#define FMPI2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001U)
+#define FMPI2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_DUAL_ADDRESSING_MODE FMPI2C Dual Addressing Mode
+ * @{
+ */
+#define FMPI2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000U)
+#define FMPI2C_DUALADDRESS_ENABLE FMPI2C_OAR2_OA2EN
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_OWN_ADDRESS2_MASKS FMPI2C Own Address2 Masks
+ * @{
+ */
+
+#define FMPI2C_OA2_NOMASK ((uint8_t)0x00U)
+#define FMPI2C_OA2_MASK01 ((uint8_t)0x01U)
+#define FMPI2C_OA2_MASK02 ((uint8_t)0x02U)
+#define FMPI2C_OA2_MASK03 ((uint8_t)0x03U)
+#define FMPI2C_OA2_MASK04 ((uint8_t)0x04U)
+#define FMPI2C_OA2_MASK05 ((uint8_t)0x05U)
+#define FMPI2C_OA2_MASK06 ((uint8_t)0x06U)
+#define FMPI2C_OA2_MASK07 ((uint8_t)0x07U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_GENERAL_CALL_ADDRESSING_MODE FMPI2C General Call Addressing Mode
+ * @{
+ */
+#define FMPI2C_GENERALCALL_DISABLE ((uint32_t)0x00000000U)
+#define FMPI2C_GENERALCALL_ENABLE FMPI2C_CR1_GCEN
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_NOSTRETCH_MODE FMPI2C No-Stretch Mode
+ * @{
+ */
+#define FMPI2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000U)
+#define FMPI2C_NOSTRETCH_ENABLE FMPI2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_MEMORY_ADDRESS_SIZE FMPI2C Memory Address Size
+ * @{
+ */
+#define FMPI2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001U)
+#define FMPI2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_XferDirection FMPI2C Transfer Direction
+ * @{
+ */
+#define FMPI2C_DIRECTION_RECEIVE ((uint32_t)0x00000000U)
+#define FMPI2C_DIRECTION_TRANSMIT ((uint32_t)0x00000001U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_RELOAD_END_MODE FMPI2C Reload End Mode
+ * @{
+ */
+#define FMPI2C_RELOAD_MODE FMPI2C_CR2_RELOAD
+#define FMPI2C_AUTOEND_MODE FMPI2C_CR2_AUTOEND
+#define FMPI2C_SOFTEND_MODE ((uint32_t)0x00000000U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_START_STOP_MODE FMPI2C Start or Stop Mode
+ * @{
+ */
+
+#define FMPI2C_NO_STARTSTOP ((uint32_t)0x00000000U)
+#define FMPI2C_GENERATE_STOP FMPI2C_CR2_STOP
+#define FMPI2C_GENERATE_START_READ (uint32_t)(FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN)
+#define FMPI2C_GENERATE_START_WRITE FMPI2C_CR2_START
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Interrupt_configuration_definition FMPI2C Interrupt configuration definition
+ * @brief FMPI2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define FMPI2C_IT_ERRI FMPI2C_CR1_ERRIE
+#define FMPI2C_IT_TCI FMPI2C_CR1_TCIE
+#define FMPI2C_IT_STOPI FMPI2C_CR1_STOPIE
+#define FMPI2C_IT_NACKI FMPI2C_CR1_NACKIE
+#define FMPI2C_IT_ADDRI FMPI2C_CR1_ADDRIE
+#define FMPI2C_IT_RXI FMPI2C_CR1_RXIE
+#define FMPI2C_IT_TXI FMPI2C_CR1_TXIE
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Flag_definition FMPI2C Flag definition
+ * @{
+ */
+#define FMPI2C_FLAG_TXE FMPI2C_ISR_TXE
+#define FMPI2C_FLAG_TXIS FMPI2C_ISR_TXIS
+#define FMPI2C_FLAG_RXNE FMPI2C_ISR_RXNE
+#define FMPI2C_FLAG_ADDR FMPI2C_ISR_ADDR
+#define FMPI2C_FLAG_AF FMPI2C_ISR_NACKF
+#define FMPI2C_FLAG_STOPF FMPI2C_ISR_STOPF
+#define FMPI2C_FLAG_TC FMPI2C_ISR_TC
+#define FMPI2C_FLAG_TCR FMPI2C_ISR_TCR
+#define FMPI2C_FLAG_BERR FMPI2C_ISR_BERR
+#define FMPI2C_FLAG_ARLO FMPI2C_ISR_ARLO
+#define FMPI2C_FLAG_OVR FMPI2C_ISR_OVR
+#define FMPI2C_FLAG_PECERR FMPI2C_ISR_PECERR
+#define FMPI2C_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT
+#define FMPI2C_FLAG_ALERT FMPI2C_ISR_ALERT
+#define FMPI2C_FLAG_BUSY FMPI2C_ISR_BUSY
+#define FMPI2C_FLAG_DIR FMPI2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Exported_Macros FMPI2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset FMPI2C handle state.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @retval None
+ */
+#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPI2C_STATE_RESET)
+
+/** @brief Enable the specified FMPI2C interrupt.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_IT_ERRI Errors interrupt enable
+ * @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref FMPI2C_IT_RXI RX interrupt enable
+ * @arg @ref FMPI2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_FMPI2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief Disable the specified FMPI2C interrupt.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_IT_ERRI Errors interrupt enable
+ * @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref FMPI2C_IT_RXI RX interrupt enable
+ * @arg @ref FMPI2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_FMPI2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified FMPI2C interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __INTERRUPT__ specifies the FMPI2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_IT_ERRI Errors interrupt enable
+ * @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref FMPI2C_IT_RXI RX interrupt enable
+ * @arg @ref FMPI2C_IT_TXI TX interrupt enable
+ *
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_FMPI2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified FMPI2C flag is set or not.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_FLAG_TXE Transmit data register empty
+ * @arg @ref FMPI2C_FLAG_TXIS Transmit interrupt status
+ * @arg @ref FMPI2C_FLAG_RXNE Receive data register not empty
+ * @arg @ref FMPI2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref FMPI2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref FMPI2C_FLAG_STOPF STOP detection flag
+ * @arg @ref FMPI2C_FLAG_TC Transfer complete (master mode)
+ * @arg @ref FMPI2C_FLAG_TCR Transfer complete reload
+ * @arg @ref FMPI2C_FLAG_BERR Bus error
+ * @arg @ref FMPI2C_FLAG_ARLO Arbitration lost
+ * @arg @ref FMPI2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref FMPI2C_FLAG_PECERR PEC error in reception
+ * @arg @ref FMPI2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref FMPI2C_FLAG_ALERT SMBus alert
+ * @arg @ref FMPI2C_FLAG_BUSY Bus busy
+ * @arg @ref FMPI2C_FLAG_DIR Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FMPI2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/** @brief Clear the FMPI2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref FMPI2C_FLAG_TXE Transmit data register empty
+ * @arg @ref FMPI2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref FMPI2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref FMPI2C_FLAG_STOPF STOP detection flag
+ * @arg @ref FMPI2C_FLAG_BERR Bus error
+ * @arg @ref FMPI2C_FLAG_ARLO Arbitration lost
+ * @arg @ref FMPI2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref FMPI2C_FLAG_PECERR PEC error in reception
+ * @arg @ref FMPI2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref FMPI2C_FLAG_ALERT SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_FMPI2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == FMPI2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
+ : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+
+/** @brief Enable the specified FMPI2C peripheral.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @retval None
+ */
+#define __HAL_FMPI2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE))
+
+/** @brief Disable the specified FMPI2C peripheral.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @retval None
+ */
+#define __HAL_FMPI2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE))
+
+/** @brief Generate a Non-Acknowledge FMPI2C peripheral in Slave mode.
+ * @param __HANDLE__: specifies the FMPI2C Handle.
+ * @retval None
+ */
+#define __HAL_FMPI2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, FMPI2C_CR2_NACK))
+/**
+ * @}
+ */
+
+/* Include FMPI2C HAL Extended module */
+#include "stm32f4xx_hal_fmpi2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FMPI2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hfmpi2c);
+HAL_StatusTypeDef HAL_FMPI2C_DeInit (FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hfmpi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions ****************************************************/
+ /******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_FMPI2C_EnableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c);
+HAL_StatusTypeDef HAL_FMPI2C_DisableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Abort_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress);
+
+ /******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* FMPI2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_AddrCallback(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_FMPI2C_ListenCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_AbortCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @{
+ */
+/* Peripheral State, Mode and Error functions *********************************/
+HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hfmpi2c);
+HAL_FMPI2C_ModeTypeDef HAL_FMPI2C_GetMode(FMPI2C_HandleTypeDef *hfmpi2c);
+uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hfmpi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Constants FMPI2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Macro FMPI2C Private Macros
+ * @{
+ */
+
+#define IS_FMPI2C_ADDRESSING_MODE(MODE) (((MODE) == FMPI2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == FMPI2C_ADDRESSINGMODE_10BIT))
+
+#define IS_FMPI2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == FMPI2C_DUALADDRESS_ENABLE))
+
+#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPI2C_OA2_NOMASK) || \
+ ((MASK) == FMPI2C_OA2_MASK01) || \
+ ((MASK) == FMPI2C_OA2_MASK02) || \
+ ((MASK) == FMPI2C_OA2_MASK03) || \
+ ((MASK) == FMPI2C_OA2_MASK04) || \
+ ((MASK) == FMPI2C_OA2_MASK05) || \
+ ((MASK) == FMPI2C_OA2_MASK06) || \
+ ((MASK) == FMPI2C_OA2_MASK07))
+
+#define IS_FMPI2C_GENERAL_CALL(CALL) (((CALL) == FMPI2C_GENERALCALL_DISABLE) || \
+ ((CALL) == FMPI2C_GENERALCALL_ENABLE))
+
+#define IS_FMPI2C_NO_STRETCH(STRETCH) (((STRETCH) == FMPI2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == FMPI2C_NOSTRETCH_ENABLE))
+
+#define IS_FMPI2C_MEMADD_SIZE(SIZE) (((SIZE) == FMPI2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == FMPI2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == FMPI2C_RELOAD_MODE) || \
+ ((MODE) == FMPI2C_AUTOEND_MODE) || \
+ ((MODE) == FMPI2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == FMPI2C_GENERATE_STOP) || \
+ ((REQUEST) == FMPI2C_GENERATE_START_READ) || \
+ ((REQUEST) == FMPI2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == FMPI2C_NO_STARTSTOP))
+
+#define IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == FMPI2C_FIRST_FRAME) || \
+ ((REQUEST) == FMPI2C_NEXT_FRAME) || \
+ ((REQUEST) == FMPI2C_FIRST_AND_LAST_FRAME) || \
+ ((REQUEST) == FMPI2C_LAST_FRAME))
+
+#define FMPI2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_RD_WRN)))
+
+#define FMPI2C_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & FMPI2C_ISR_ADDCODE) >> 16)
+#define FMPI2C_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & FMPI2C_ISR_DIR) >> 16)
+#define FMPI2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & FMPI2C_CR2_AUTOEND)
+#define FMPI2C_GET_OWN_ADDRESS1(__HANDLE__) ((__HANDLE__)->Instance->OAR1 & FMPI2C_OAR1_OA1)
+#define FMPI2C_GET_OWN_ADDRESS2(__HANDLE__) ((__HANDLE__)->Instance->OAR2 & FMPI2C_OAR2_OA2)
+
+#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FFU)
+#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+#define FMPI2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define FMPI2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+#define FMPI2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == FMPI2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & (~FMPI2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_ADD10) | (FMPI2C_CR2_START)) & (~FMPI2C_CR2_RD_WRN)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f4xx_hal_fmpi2c.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_FMPI2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,258 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FMPI2C Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of FMPI2C Extended peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FMPI2C peripheral Extended features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the FMPI2C interface for STM32F4xx
+ devices contains the following additional features
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+ (+) Disable or enable wakeup from Stop mode
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure Noise Filter and Wake Up Feature
+ (#) Configure FMPI2C Analog noise filter using the function HAL_FMPI2CEx_ConfigAnalogFilter()
+ (#) Configure FMPI2C Digital noise filter using the function HAL_FMPI2CEx_ConfigDigitalFilter()
+ (#) Configure the enable or disable of FMPI2C Wake Up Mode using the functions :
+ (++) HAL_FMPI2CEx_EnableWakeUp()
+ (++) HAL_FMPI2CEx_DisableWakeUp()
+ (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+ (++) HAL_FMPI2CEx_EnableFastModePlus()
+ (++) HAL_FMPI2CEx_DisbleFastModePlus()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FMPI2CEx FMPI2CEx
+ * @brief FMPI2C Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup FMPI2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+ (+) Configure Wake Up Feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure FMPI2C Analog noise filter.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2Cx peripheral.
+ * @param AnalogFilter New state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2CEx_ConfigAnalogFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_FMPI2C_ANALOG_FILTER(AnalogFilter));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* Reset FMPI2Cx ANOFF bit */
+ hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_ANFOFF);
+
+ /* Set analog filter bit*/
+ hfmpi2c->Instance->CR1 |= AnalogFilter;
+
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configure FMPI2C Digital noise filter.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2Cx peripheral.
+ * @param DigitalFilter Coefficient of digital noise filter between 0x00 and 0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2CEx_ConfigDigitalFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_FMPI2C_DIGITAL_FILTER(DigitalFilter));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* Get the old register value */
+ tmpreg = hfmpi2c->Instance->CR1;
+
+ /* Reset FMPI2Cx DNF bits [11:8] */
+ tmpreg &= ~(FMPI2C_CR1_DFN);
+
+ /* Set FMPI2Cx DNF coefficient */
+ tmpreg |= DigitalFilter << 8U;
+
+ /* Store the new register value */
+ hfmpi2c->Instance->CR1 = tmpreg;
+
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable the FMPI2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref FMPI2CEx_FastModePlus values
+ * @retval None
+ */
+void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Enable fast mode plus driving capability for selected pin */
+ SET_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the FMPI2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref FMPI2CEx_FastModePlus values
+ * @retval None
+ */
+void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Disable fast mode plus driving capability for selected pin */
+ CLEAR_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,163 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FMPI2C HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FMPI2C_EX_H
+#define __STM32F4xx_HAL_FMPI2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMPI2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FMPI2CEx_Exported_Constants FMPI2C Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup FMPI2CEx_Analog_Filter FMPI2C Extended Analog Filter
+ * @{
+ */
+#define FMPI2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000U)
+#define FMPI2C_ANALOGFILTER_DISABLE FMPI2C_CR1_ANFOFF
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2CEx_FastModePlus FMPI2C Extended Fast Mode Plus
+ * @{
+ */
+#define FMPI2C_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C1 SCL pins */
+#define FMPI2C_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C1 SDA pins */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup FMPI2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_FMPI2CEx_ConfigAnalogFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_FMPI2CEx_ConfigDigitalFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter);
+void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMPI2CEx_Private_Constants FMPI2C Extended Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FMPI2CEx_Private_Macro FMPI2C Extended Private Macros
+ * @{
+ */
+#define IS_FMPI2C_ANALOG_FILTER(FILTER) (((FILTER) == FMPI2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == FMPI2C_ANALOGFILTER_DISABLE))
+
+#define IS_FMPI2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+
+#define IS_FMPI2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SCL)) == FMPI2C_FASTMODEPLUS_SCL) || \
+ (((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SDA)) == FMPI2C_FASTMODEPLUS_SDA))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup FMPI2CEx_Private_Functions FMPI2C Extended Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f4xx_hal_fmpi2c_ex.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FMPI2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,547 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief GPIO HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the General Purpose Input/Output (GPIO) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### GPIO Peripheral features #####
+ ==============================================================================
+ [..]
+ Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
+ port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
+ in several modes:
+ (+) Input mode
+ (+) Analog mode
+ (+) Output mode
+ (+) Alternate function mode
+ (+) External interrupt/event lines
+
+ [..]
+ During and just after reset, the alternate functions and external interrupt
+ lines are not active and the I/O ports are configured in input floating mode.
+
+ [..]
+ All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+ activated or not.
+
+ [..]
+ In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+ type and the IO speed can be selected depending on the VDD value.
+
+ [..]
+ All ports have external interrupt/event capability. To use external interrupt
+ lines, the port must be configured in input mode. All available GPIO pins are
+ connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+ [..]
+ The external interrupt/event controller consists of up to 23 edge detectors
+ (16 lines are connected to GPIO) for generating event/interrupt requests (each
+ input line can be independently configured to select the type (interrupt or event)
+ and the corresponding trigger event (rising or falling or both). Each line can
+ also be masked independently.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
+
+ (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+ (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+ (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+ structure.
+ (++) In case of Output or alternate function mode selection: the speed is
+ configured through "Speed" member from GPIO_InitTypeDef structure.
+ (++) In alternate mode is selection, the alternate function connected to the IO
+ is configured through "Alternate" member from GPIO_InitTypeDef structure.
+ (++) Analog mode is required when a pin is to be used as ADC channel
+ or DAC output.
+ (++) In case of external interrupt/event selection the "Mode" member from
+ GPIO_InitTypeDef structure select the type (interrupt or event) and
+ the corresponding trigger event (rising or falling or both).
+
+ (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+ mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+ HAL_NVIC_EnableIRQ().
+
+ (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+ (#) To set/reset the level of a pin configured in output mode use
+ HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+ (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+
+ (#) During and just after reset, the alternate functions are not
+ active and the GPIO pins are configured in input floating mode (except JTAG
+ pins).
+
+ (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+ (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
+ priority over the GPIO function.
+
+ (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+ general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
+ The HSE has priority over the GPIO function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIO GPIO
+ * @brief GPIO HAL module driver
+ * @{
+ */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+#define GPIO_MODE ((uint32_t)0x00000003U)
+#define EXTI_MODE ((uint32_t)0x10000000U)
+#define GPIO_MODE_IT ((uint32_t)0x00010000U)
+#define GPIO_MODE_EVT ((uint32_t)0x00020000U)
+#define RISING_EDGE ((uint32_t)0x00100000U)
+#define FALLING_EDGE ((uint32_t)0x00200000U)
+#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010U)
+
+#define GPIO_NUMBER ((uint32_t)16U)
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize and de-initialize the GPIOs
+ to be ready for use.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+ * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains
+ * the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+ uint32_t position;
+ uint32_t ioposition = 0x00U;
+ uint32_t iocurrent = 0x00U;
+ uint32_t temp = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+ assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+ assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+ /* Configure the port pins */
+ for(position = 0U; position < GPIO_NUMBER; position++)
+ {
+ /* Get the IO position */
+ ioposition = ((uint32_t)0x01U) << position;
+ /* Get the current IO position */
+ iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
+
+ if(iocurrent == ioposition)
+ {
+ /*--------------------- GPIO Mode Configuration ------------------------*/
+ /* In case of Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Alternate function parameter */
+ assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+ /* Configure Alternate function mapped with the current IO */
+ temp = GPIOx->AFR[position >> 3U];
+ temp &= ~((uint32_t)0xFU << ((uint32_t)(position & (uint32_t)0x07U) * 4U)) ;
+ temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07U) * 4U));
+ GPIOx->AFR[position >> 3U] = temp;
+ }
+
+ /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+ temp = GPIOx->MODER;
+ temp &= ~(GPIO_MODER_MODER0 << (position * 2U));
+ temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U));
+ GPIOx->MODER = temp;
+
+ /* In case of Output or Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+ (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Speed parameter */
+ assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+ /* Configure the IO Speed */
+ temp = GPIOx->OSPEEDR;
+ temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+ temp |= (GPIO_Init->Speed << (position * 2U));
+ GPIOx->OSPEEDR = temp;
+
+ /* Configure the IO Output Type */
+ temp = GPIOx->OTYPER;
+ temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+ temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position);
+ GPIOx->OTYPER = temp;
+ }
+
+ /* Activate the Pull-up or Pull down resistor for the current IO */
+ temp = GPIOx->PUPDR;
+ temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+ temp |= ((GPIO_Init->Pull) << (position * 2U));
+ GPIOx->PUPDR = temp;
+
+ /*--------------------- EXTI Mode Configuration ------------------------*/
+ /* Configure the External Interrupt or event for the current IO */
+ if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ {
+ /* Enable SYSCFG Clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ temp = SYSCFG->EXTICR[position >> 2U];
+ temp &= ~(((uint32_t)0x0FU) << (4U * (position & 0x03U)));
+ temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U)));
+ SYSCFG->EXTICR[position >> 2U] = temp;
+
+ /* Clear EXTI line configuration */
+ temp = EXTI->IMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->IMR = temp;
+
+ temp = EXTI->EMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->EMR = temp;
+
+ /* Clear Rising Falling edge configuration */
+ temp = EXTI->RTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->RTSR = temp;
+
+ temp = EXTI->FTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->FTSR = temp;
+ }
+ }
+ }
+}
+
+/**
+ * @brief De-initializes the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
+{
+ uint32_t position;
+ uint32_t ioposition = 0x00U;
+ uint32_t iocurrent = 0x00U;
+ uint32_t tmp = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+
+ /* Configure the port pins */
+ for(position = 0U; position < GPIO_NUMBER; position++)
+ {
+ /* Get the IO position */
+ ioposition = ((uint32_t)0x01U) << position;
+ /* Get the current IO position */
+ iocurrent = (GPIO_Pin) & ioposition;
+
+ if(iocurrent == ioposition)
+ {
+ /*------------------------- GPIO Mode Configuration --------------------*/
+ /* Configure IO Direction in Input Floating Mode */
+ GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U));
+
+ /* Configure the default Alternate Function in current IO */
+ GPIOx->AFR[position >> 3U] &= ~((uint32_t)0xFU << ((uint32_t)(position & (uint32_t)0x07U) * 4U)) ;
+
+ /* Configure the default value for IO Speed */
+ GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+
+ /* Configure the default value IO Output Type */
+ GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+ /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+ GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+
+ /*------------------------- EXTI Mode Configuration --------------------*/
+ tmp = SYSCFG->EXTICR[position >> 2U];
+ tmp &= (((uint32_t)0x0FU) << (4U * (position & 0x03U)));
+ if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U))))
+ {
+ /* Configure the External Interrupt or event for the current IO */
+ tmp = ((uint32_t)0x0FU) << (4U * (position & 0x03U));
+ SYSCFG->EXTICR[position >> 2U] &= ~tmp;
+
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~((uint32_t)iocurrent);
+ EXTI->EMR &= ~((uint32_t)iocurrent);
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~((uint32_t)iocurrent);
+ EXTI->FTSR &= ~((uint32_t)iocurrent);
+ }
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @brief GPIO Read and Write
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads the specified input port pin.
+ * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_PIN_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ GPIO_PinState bitstatus;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+ {
+ bitstatus = GPIO_PIN_SET;
+ }
+ else
+ {
+ bitstatus = GPIO_PIN_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Sets or clears the selected data port bit.
+ *
+ * @note This function uses GPIOx_BSRR register to allow atomic read/modify
+ * accesses. In this way, there is no risk of an IRQ occurring between
+ * the read and the modify access.
+ *
+ * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @param PinState: specifies the value to be written to the selected bit.
+ * This parameter can be one of the GPIO_PinState enum values:
+ * @arg GPIO_PIN_RESET: to clear the port pin
+ * @arg GPIO_PIN_SET: to set the port pin
+ * @retval None
+ */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+ if(PinState != GPIO_PIN_RESET)
+ {
+ GPIOx->BSRR = GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U;
+ }
+}
+
+/**
+ * @brief Toggles the specified GPIO pins.
+ * @param GPIOx: Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Pin: Specifies the pins to be toggled.
+ * @retval None
+ */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+ * @brief Locks GPIO Pins configuration registers.
+ * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+ * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+ * @note The configuration of the locked GPIO pins can no longer be modified
+ * until the next reset.
+ * @param GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F4 family
+ * @param GPIO_Pin: specifies the port bit to be locked.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Apply lock key write sequence */
+ tmp |= GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+ {
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief This function handles EXTI interrupt request.
+ * @param GPIO_Pin: Specifies the pins connected EXTI line
+ * @retval None
+ */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+ /* EXTI line interrupt detected */
+ if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+ {
+ __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+ HAL_GPIO_EXTI_Callback(GPIO_Pin);
+ }
+}
+
+/**
+ * @brief EXTI line detection callbacks.
+ * @param GPIO_Pin: Specifies the pins connected EXTI line
+ * @retval None
+ */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(GPIO_Pin);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_GPIO_EXTI_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,327 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_H
+#define __STM32F4xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFFU) /* PIN mask for assert test */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000U) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001U) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011U) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002U) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012U) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003U) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed_define GPIO speed define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< IO works at 2 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_MEDIUM ((uint32_t)0x00000001U) /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_HIGH ((uint32_t)0x00000002U) /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_VERY_HIGH ((uint32_t)0x00000003U) /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000U) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001U) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002U) /*!< Pull-down activation */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f4xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00U)
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1452 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_EX_H
+#define __STM32F4xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
+ * @{
+ */
+
+/*------------------------------------------ STM32F429xx/STM32F439xx ---------*/
+#if defined(STM32F429xx) || defined(STM32F439xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_LTDC ((uint8_t)0x09U) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_LTDC ((uint8_t)0x0EU) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F429xx || STM32F439xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
+/** @brief GPIO_Legacy
+ */
+#define GPIO_AF5_I2S3ext GPIO_AF5_SPI3 /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F427xx || STM32F437xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx------------------*/
+#if defined(STM32F407xx) || defined(STM32F417xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0x0CU) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F407xx || STM32F417xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0x0CU) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F405xx || STM32F415xx */
+
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09U) /* I2C3 Alternate Function mapping */
+
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F401xC || STM32F401xE */
+/*----------------------------------------------------------------------------*/
+
+/*--------------- STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-------------*/
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04U) /* FMPI2C1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4/I2S4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06U) /* SPI4/I2S4 Alternate Function mapping */
+#define GPIO_AF6_SPI5 ((uint8_t)0x06U) /* SPI5/I2S5 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_DFSDM1 ((uint8_t)0x06U) /* DFSDM1 Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_USART3 ((uint8_t)0x08U) /* USART3 Alternate Function mapping */
+#define GPIO_AF8_DFSDM1 ((uint8_t)0x08U) /* DFSDM1 Alternate Function mapping */
+#define GPIO_AF8_CAN1 ((uint8_t)0x08U) /* CAN1 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09U) /* FMPI2C1 Alternate Function mapping */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_QSPI ((uint8_t)0x09U) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_DFSDM1 ((uint8_t)0x0AU) /* DFSDM1 Alternate Function mapping */
+#define GPIO_AF10_QSPI ((uint8_t)0x0AU) /* QSPI Alternate Function mapping */
+#define GPIO_AF10_FMC ((uint8_t)0x0AU) /* FMC Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+#define GPIO_AF12_FSMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*---------------------------------------- STM32F411xx------------------------*/
+#if defined(STM32F411xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06U) /* SPI4/I2S4 Alternate Function mapping */
+#define GPIO_AF6_SPI5 ((uint8_t)0x06U) /* SPI5/I2S5 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F411xE */
+
+/*---------------------------------------- STM32F410xx------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_LPTIM1 ((uint8_t)0x01U) /* LPTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04U) /* FMPI2C1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#if defined(STM32F410Cx) || defined(STM32F410Rx)
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#endif /* STM32F410Cx || STM32F410Rx */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06U) /* SPI1 Alternate Function mapping */
+#if defined(STM32F410Cx) || defined(STM32F410Rx)
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* I2S2 Alternate Function mapping */
+#endif /* STM32F410Cx || STM32F410Rx */
+#define GPIO_AF6_SPI5 ((uint8_t)0x06U) /* SPI5/I2S5 Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09U) /* FMPI2C1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/*---------------------------------------- STM32F446xx -----------------------*/
+#if defined(STM32F446xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+#define GPIO_AF3_CEC ((uint8_t)0x03U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04U) /* FMPI2C1 Alternate Function mapping */
+#define GPIO_AF4_CEC ((uint8_t)0x04U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
+#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_SPDIFRX ((uint8_t)0x07U) /* SPDIFRX Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_SPDIFRX ((uint8_t)0x08U) /* SPDIFRX Alternate Function mapping */
+#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_QSPI ((uint8_t)0x09U) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_SAI2 ((uint8_t)0x0AU) /* SAI2 Alternate Function mapping */
+#define GPIO_AF10_QSPI ((uint8_t)0x0AU) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#endif /* STM32F446xx */
+/*----------------------------------------------------------------------------*/
+
+/*-------------------------------- STM32F469xx/STM32F479xx--------------------*/
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_LTDC ((uint8_t)0x09U) /* LCD-TFT Alternate Function mapping */
+#define GPIO_AF9_QSPI ((uint8_t)0x09U) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_QSPI ((uint8_t)0x0AU) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+#define GPIO_AF13_DSI ((uint8_t)0x0DU) /* DSI Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_LTDC ((uint8_t)0x0EU) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#endif /* STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
+ * @{
+ */
+/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U :\
+ ((__GPIOx__) == (GPIOI))? 8U : 9U)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U :\
+ ((__GPIOx__) == (GPIOI))? 8U :\
+ ((__GPIOx__) == (GPIOJ))? 9U : 10U)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOH))? 7U : 8U)
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F446xx) || defined(STM32F412Zx) ||defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U : 8U)
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
+ * @{
+ */
+/*------------------------- STM32F429xx/STM32F439xx---------------------------*/
+#if defined(STM32F429xx) || defined(STM32F439xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF14_LTDC))
+
+#endif /* STM32F429xx || STM32F439xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1))
+
+#endif /* STM32F427xx || STM32F437xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx------------------*/
+#if defined(STM32F407xx) || defined(STM32F417xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F407xx || STM32F417xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F405xx || STM32F415xx */
+
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F401xC || STM32F401xE */
+/*----------------------------------------------------------------------------*/
+/*---------------------------------------- STM32F410xx------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_GPIO_AF(AF) (((AF) < 10U) || ((AF) == 15U))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/*---------------------------------------- STM32F411xx------------------------*/
+#if defined(STM32F411xE)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F411xE */
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------------------------- STM32F446xx ----------------*/
+#if defined(STM32F446xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI2) || \
+ ((AF) == GPIO_AF6_SPI4) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPI2) || ((AF) == GPIO_AF7_SPI3) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF9_QSPI) || \
+ ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QSPI))
+
+#endif /* STM32F446xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------------------------- STM32F469xx/STM32F479xx --------*/
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI) || \
+ ((AF) == GPIO_AF9_QSPI) || ((AF) == GPIO_AF10_QSPI))
+
+#endif /* STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-----------*/
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 11U) && ((AF) != 14U) && ((AF) != 13U))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*----------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1868 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief HASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the HASH peripheral:
+ * + Initialization and de-initialization functions
+ * + HASH/HMAC Processing functions by algorithm using polling mode
+ * + HASH/HMAC functions by algorithm using interrupt mode
+ * + HASH/HMAC functions by algorithm using DMA mode
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The HASH HAL driver can be used as follows:
+ (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
+ (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
+ (##) In case of using processing APIs based on interrupts (e.g. HAL_HMAC_SHA1_Start_IT())
+ (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
+ (##) In case of using DMA to control data transfer (e.g. HAL_HMAC_SHA1_Start_DMA())
+ (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+ (+++) Configure and enable one DMA stream one for managing data transfer from
+ memory to peripheral (input stream). Managing data transfer from
+ peripheral to memory can be performed only using CPU
+ (+++) Associate the initialized DMA handle to the HASH DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA Stream using HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+ (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
+ (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
+ (##) For HMAC, the encryption key.
+ (##) For HMAC, the key size used for encryption.
+ (#)Three processing functions are available:
+ (##) Polling mode: processing APIs are blocking functions
+ i.e. they process the data and wait till the digest computation is finished
+ e.g. HAL_HASH_SHA1_Start()
+ (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+ i.e. they process the data under interrupt
+ e.g. HAL_HASH_SHA1_Start_IT()
+ (##) DMA mode: processing APIs are not blocking functions and the CPU is
+ not used for data transfer i.e. the data transfer is ensured by DMA
+ e.g. HAL_HASH_SHA1_Start_DMA()
+ (#)When the processing function is called at first time after HAL_HASH_Init()
+ the HASH peripheral is initialized and processes the buffer in input.
+ After that, the digest computation is started.
+ When processing multi-buffer use the accumulate function to write the
+ data in the peripheral without starting the digest computation. In last
+ buffer use the start function to input the last buffer ans start the digest
+ computation.
+ (##) e.g. HAL_HASH_SHA1_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
+ (##) write (n-1)th data buffer in the peripheral without starting the digest computation
+ (##) HAL_HASH_SHA1_Start() : write (n)th data buffer in the peripheral and start the digest computation
+ (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
+ (#)In case of using DMA, call the DMA start processing e.g. HAL_HASH_SHA1_Start_DMA().
+ After that, call the finish function in order to get the digest value
+ e.g. HAL_HASH_SHA1_Finish()
+ (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HASH HASH
+ * @brief HASH HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+ * @{
+ */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void HASH_DMAError(DMA_HandleTypeDef *hdma);
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
+static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup HASH_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief DMA HASH Input Data complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ uint32_t inputaddr = 0U;
+ uint32_t buffersize = 0U;
+
+ if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
+ {
+ /* Disable the DMA transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ else
+ {
+ /* Increment Interrupt counter */
+ hhash->HashInCount++;
+ /* Disable the DMA transfer before starting the next transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ if(hhash->HashInCount <= 2U)
+ {
+ /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
+ if(hhash->HashInCount == 1U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ buffersize = hhash->HashBuffSize;
+ }
+ /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
+ else if(hhash->HashInCount == 2U)
+ {
+ inputaddr = (uint32_t)hhash->Init.pKey;
+ buffersize = hhash->Init.KeySize;
+ }
+ /* Configure the number of valid bits in last word of the message */
+ MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8U * (buffersize % 4U));
+
+ /* Set the HASH DMA transfer complete */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4U ? (buffersize+3U)/4U:buffersize/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+ }
+ else
+ {
+ /* Disable the DMA transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ /* Reset the InCount */
+ hhash->HashInCount = 0U;
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+}
+
+/**
+ * @brief DMA HASH communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void HASH_DMAError(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hhash->State= HAL_HASH_STATE_READY;
+ HAL_HASH_ErrorCallback(hhash);
+}
+
+/**
+ * @brief Writes the input buffer in data register.
+ * @param pInBuffer: Pointer to input buffer
+ * @param Size: The size of input buffer
+ * @retval None
+ */
+static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t buffercounter;
+ uint32_t inputaddr = (uint32_t) pInBuffer;
+
+ for(buffercounter = 0U; buffercounter < Size; buffercounter+=4)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+}
+
+/**
+ * @brief Provides the message digest result.
+ * @param pMsgDigest: Pointer to the message digest
+ * @param Size: The size of the message digest in bytes
+ * @retval None
+ */
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
+{
+ uint32_t msgdigest = (uint32_t)pMsgDigest;
+
+ switch(Size)
+ {
+ case 16U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ break;
+ case 20U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ break;
+ case 28U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6U]);
+ break;
+ case 32U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7U]);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HASH_Exported_Functions
+ * @{
+ */
+
+
+/** @addtogroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the HASH according to the specified parameters
+ in the HASH_InitTypeDef and creates the associated handle.
+ (+) DeInitialize the HASH peripheral.
+ (+) Initialize the HASH MSP.
+ (+) DeInitialize HASH MSP.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH according to the specified parameters in the
+ HASH_HandleTypeDef and creates the associated handle.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash)
+{
+ /* Check the hash handle allocation */
+ if(hhash == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_HASH_DATATYPE(hhash->Init.DataType));
+
+ if(hhash->State == HAL_HASH_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hhash->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_HASH_MspInit(hhash);
+ }
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Reset HashInCount, HashBuffSize and HashITCounter */
+ hhash->HashInCount = 0U;
+ hhash->HashBuffSize = 0U;
+ hhash->HashITCounter = 0U;
+
+ /* Set the data type */
+ HASH->CR |= (uint32_t) (hhash->Init.DataType);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Set the default HASH phase */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the HASH peripheral.
+ * @note This API must be called before starting a new processing.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash)
+{
+ /* Check the HASH handle allocation */
+ if(hhash == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Set the default HASH phase */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+
+ /* Reset HashInCount, HashBuffSize and HashITCounter */
+ hhash->HashInCount = 0U;
+ hhash->HashBuffSize = 0U;
+ hhash->HashITCounter = 0U;
+
+ /* DeInit the low level hardware */
+ HAL_HASH_MspDeInit(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH MSP.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+__weak void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes HASH MSP.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+__weak void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Input data transfer complete callback.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+ __weak void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_InCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Data transfer Error callback.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+ __weak void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Digest computation complete callback. It is used only with interrupt.
+ * @note This callback is not relevant with DMA.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+ __weak void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_DgstCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group2 HASH processing functions using polling mode
+ * @brief processing functions using polling mode
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using polling mode functions#####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the hash value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
+ The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is multiple of 64 bytes, appending the input buffer is possible.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware
+ * and appending the input buffer is no more possible.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 16U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in MD5 mode then writes the pInBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is multiple of 64 bytes, appending the input buffer is possible.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware
+ * and appending the input buffer is no more possible.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+ The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 20U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @note Input buffer size in bytes must be a multiple of 4 otherwise the digest computation is corrupted.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ /* Check the parameters */
+ assert_param(IS_HASH_SHA1_BUFFER_SIZE(Size));
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group3 HASH processing functions using interrupt mode
+ * @brief processing functions using interrupt mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using interrupt mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in interrupt mode
+ the hash value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
+ * The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+ uint32_t buffercounter;
+ uint32_t inputcounter;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ if(hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ hhash->HashInCount = Size;
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->pHashOutBuffPtr = pOutBuffer;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode */
+ HASH->CR |= HASH_ALGOSELECTION_MD5;
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+ /* Reset interrupt counter */
+ hhash->HashITCounter = 0U;
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+ {
+ outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[0U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[1U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[2U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[3U]);
+
+ if(hhash->HashInCount == 0U)
+ {
+ /* Disable Interrupts */
+ HASH->IMR = 0U;
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Call digest computation complete callback */
+ HAL_HASH_DgstCpltCallback(hhash);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ if(hhash->HashInCount >= 68U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < 64U; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ if(hhash->HashITCounter == 0U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+
+ if(hhash->HashInCount >= 68U)
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 68U;
+ hhash->pHashInBuffPtr+= 68U;
+ }
+ else
+ {
+ hhash->HashInCount = 0U;
+ hhash->pHashInBuffPtr+= hhash->HashInCount;
+ }
+ /* Set Interrupt counter */
+ hhash->HashITCounter = 1U;
+ }
+ else
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 64U;
+ hhash->pHashInBuffPtr+= 64U;
+ }
+ }
+ else
+ {
+ /* Get the buffer address */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Get the buffer counter */
+ inputcounter = hhash->HashInCount;
+ /* Disable Interrupts */
+ HASH->IMR &= ~(HASH_IT_DINI);
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+ if((inputcounter > 4U) && (inputcounter%4U))
+ {
+ inputcounter = (inputcounter+4U-inputcounter%4U);
+ }
+ else if ((inputcounter < 4U) && (inputcounter != 0U))
+ {
+ inputcounter = 4U;
+ }
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < inputcounter/4U; buffercounter++)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Reset buffer counter */
+ hhash->HashInCount = 0U;
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+ * The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+ uint32_t buffercounter;
+ uint32_t inputcounter;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ if(hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ hhash->HashInCount = Size;
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->pHashOutBuffPtr = pOutBuffer;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode */
+ HASH->CR |= HASH_ALGOSELECTION_SHA1;
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+ /* Reset interrupt counter */
+ hhash->HashITCounter = 0U;
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+ {
+ outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[0U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[1U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[2U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[3U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[4U]);
+ if(hhash->HashInCount == 0U)
+ {
+ /* Disable Interrupts */
+ HASH->IMR = 0U;
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Call digest computation complete callback */
+ HAL_HASH_DgstCpltCallback(hhash);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ if(hhash->HashInCount >= 68U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < 64U; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ if(hhash->HashITCounter == 0U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ if(hhash->HashInCount >= 68U)
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 68U;
+ hhash->pHashInBuffPtr+= 68U;
+ }
+ else
+ {
+ hhash->HashInCount = 0U;
+ hhash->pHashInBuffPtr+= hhash->HashInCount;
+ }
+ /* Set Interrupt counter */
+ hhash->HashITCounter = 1U;
+ }
+ else
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 64U;
+ hhash->pHashInBuffPtr+= 64U;
+ }
+ }
+ else
+ {
+ /* Get the buffer address */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Get the buffer counter */
+ inputcounter = hhash->HashInCount;
+ /* Disable Interrupts */
+ HASH->IMR &= ~(HASH_IT_DINI);
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+ if((inputcounter > 4U) && (inputcounter%4U))
+ {
+ inputcounter = (inputcounter+4U-inputcounter%4U);
+ }
+ else if ((inputcounter < 4U) && (inputcounter != 0U))
+ {
+ inputcounter = 4U;
+ }
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < inputcounter/4U; buffercounter++)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Reset buffer counter */
+ hhash->HashInCount = 0U;
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles HASH interrupt request.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash)
+{
+ switch(HASH->CR & HASH_CR_ALGO)
+ {
+ case HASH_ALGOSELECTION_MD5:
+ HAL_HASH_MD5_Start_IT(hhash, NULL, 0U, NULL);
+ break;
+
+ case HASH_ALGOSELECTION_SHA1:
+ HAL_HASH_SHA1_Start_IT(hhash, NULL, 0U, NULL);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group4 HASH processing functions using DMA mode
+ * @brief processing functions using DMA mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using DMA mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the hash value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in MD5 mode then enables DMA to
+ control data transfer. Use HAL_HASH_MD5_Finish() to get the digest.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = (uint32_t)pInBuffer;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+ }
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4U ? (Size+3U)/4U:Size/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the computed digest in MD5 mode
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 16U);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA1 mode then enables DMA to
+ control data transfer. Use HAL_HASH_SHA1_Finish() to get the digest.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = (uint32_t)pInBuffer;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA1;
+ HASH->CR |= HASH_CR_INIT;
+ }
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4U ? (Size+3U)/4U:Size/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the computed digest in SHA1 mode.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 20U);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process UnLock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group5 HASH-MAC (HMAC) processing functions using polling mode
+ * @brief HMAC processing functions using polling mode .
+ *
+@verbatim
+ ===============================================================================
+ ##### HMAC processing using polling mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the HMAC value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC MD5 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC MD5 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC MD5 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /************************** STEP 1 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 2 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 3 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 16U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA1 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA1 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC SHA1 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /************************** STEP 1 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 2 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 3 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 20U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group6 HASH-MAC (HMAC) processing functions using DMA mode
+ * @brief HMAC processing functions using DMA mode .
+ *
+@verbatim
+ ===============================================================================
+ ##### HMAC processing using DMA mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the HMAC value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC MD5 mode
+ * then enables DMA to control data transfer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Save buffer pointer and size in handle */
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->HashBuffSize = Size;
+ hhash->HashInCount = 0U;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC MD5 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC MD5 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Get the key address */
+ inputaddr = (uint32_t)(hhash->Init.pKey);
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4U ? (hhash->Init.KeySize+3U)/4U:hhash->Init.KeySize/4U));
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA1 mode
+ * then enables DMA to control data transfer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Save buffer pointer and size in handle */
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->HashBuffSize = Size;
+ hhash->HashInCount = 0U;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA1 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC SHA1 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Get the key address */
+ inputaddr = (uint32_t)(hhash->Init.pKey);
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4U ? (hhash->Init.KeySize+3U)/4U:hhash->Init.KeySize/4U));
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group7 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the HASH state
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval HAL state
+ */
+HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash)
+{
+ return hhash->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx || STM32F479xx */
+#endif /* HAL_HASH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,451 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of HASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_H
+#define __STM32F4xx_HAL_HASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASH
+ * @brief HASH HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Types HASH Exported Types
+ * @{
+ */
+
+/** @defgroup HASH_Exported_Types_Group1 HASH Configuration Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref HASH_Data_Type */
+
+ uint32_t KeySize; /*!< The key size is used only in HMAC operation */
+
+ uint8_t* pKey; /*!< The key is used only in HMAC operation */
+}HASH_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Types_Group2 HASH State structures definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_HASH_STATE_RESET = 0x00U, /*!< HASH not yet initialized or disabled */
+ HAL_HASH_STATE_READY = 0x01U, /*!< HASH initialized and ready for use */
+ HAL_HASH_STATE_BUSY = 0x02U, /*!< HASH internal process is ongoing */
+ HAL_HASH_STATE_TIMEOUT = 0x03U, /*!< HASH timeout state */
+ HAL_HASH_STATE_ERROR = 0x04U /*!< HASH error state */
+}HAL_HASH_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Types_Group3 HASH phase structures definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_HASH_PHASE_READY = 0x01U, /*!< HASH peripheral is ready for initialization */
+ HAL_HASH_PHASE_PROCESS = 0x02U /*!< HASH peripheral is in processing phase */
+}HAL_HASH_PhaseTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Types_Group4 HASH Handle structures definition
+ * @{
+ */
+
+typedef struct
+{
+ HASH_InitTypeDef Init; /*!< HASH required parameters */
+
+ uint8_t *pHashInBuffPtr; /*!< Pointer to input buffer */
+
+ uint8_t *pHashOutBuffPtr; /*!< Pointer to input buffer */
+
+ __IO uint32_t HashBuffSize; /*!< Size of buffer to be processed */
+
+ __IO uint32_t HashInCount; /*!< Counter of inputed data */
+
+ __IO uint32_t HashITCounter; /*!< Counter of issued interrupts */
+
+ HAL_StatusTypeDef Status; /*!< HASH peripheral status */
+
+ HAL_HASH_PhaseTypeDef Phase; /*!< HASH peripheral phase */
+
+ DMA_HandleTypeDef *hdmain; /*!< HASH In DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< HASH locking object */
+
+ __IO HAL_HASH_StateTypeDef State; /*!< HASH peripheral state */
+} HASH_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HASH_Exported_Constants HASH Exported Constants
+ * @{
+ */
+
+/** @defgroup HASH_Exported_Constants_Group1 HASH Algorithm Selection
+ * @{
+ */
+#define HASH_ALGOSELECTION_SHA1 ((uint32_t)0x00000000U) /*!< HASH function is SHA1 */
+#define HASH_ALGOSELECTION_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */
+#define HASH_ALGOSELECTION_SHA256 HASH_CR_ALGO /*!< HASH function is SHA256 */
+#define HASH_ALGOSELECTION_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group2 HASH Algorithm Mode
+ * @{
+ */
+#define HASH_ALGOMODE_HASH ((uint32_t)0x00000000U) /*!< Algorithm is HASH */
+#define HASH_ALGOMODE_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Data_Type HASH Data Type
+ * @{
+ */
+#define HASH_DATATYPE_32B ((uint32_t)0x00000000U) /*!< 32-bit data. No swapping */
+#define HASH_DATATYPE_16B HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */
+#define HASH_DATATYPE_8B HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */
+#define HASH_DATATYPE_1B HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group4 HASH HMAC Long key
+ * @brief HASH HMAC Long key used only for HMAC mode
+ * @{
+ */
+#define HASH_HMAC_KEYTYPE_SHORTKEY ((uint32_t)0x00000000U) /*!< HMAC Key is <= 64 bytes */
+#define HASH_HMAC_KEYTYPE_LONGKEY HASH_CR_LKEY /*!< HMAC Key is > 64 bytes */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group5 HASH Flags definition
+ * @{
+ */
+#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */
+#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */
+#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
+#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy : processing a block of data */
+#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : The input buffer contains at least one word of data */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group6 HASH Interrupts definition
+ * @{
+ */
+#define HASH_IT_DINI HASH_IMR_DINIE /*!< A new block can be entered into the input buffer (DIN) */
+#define HASH_IT_DCI HASH_IMR_DCIE /*!< Digest calculation complete */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Macros HASH Exported Macros
+ * @{
+ */
+
+/** @brief Reset HASH handle state
+ * @param __HANDLE__: specifies the HASH handle.
+ * @retval None
+ */
+#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET)
+
+/** @brief Check whether the specified HASH flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg HASH_FLAG_DINIS: A new block can be entered into the input buffer.
+ * @arg HASH_FLAG_DCIS: Digest calculation complete
+ * @arg HASH_FLAG_DMAS: DMA interface is enabled (DMAE=1) or a transfer is ongoing
+ * @arg HASH_FLAG_BUSY: The hash core is Busy : processing a block of data
+ * @arg HASH_FLAG_DINNE: DIN not empty : The input buffer contains at least one word of data
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_HASH_GET_FLAG(__FLAG__) (((__FLAG__) > 8U) ? ((HASH->CR & (__FLAG__)) == (__FLAG__)) :\
+ ((HASH->SR & (__FLAG__)) == (__FLAG__)))
+
+/**
+ * @brief Enable the multiple DMA mode.
+ * This feature is available only in STM32F429x and STM32F439x devices.
+ * @retval None
+ */
+#define __HAL_HASH_SET_MDMAT() HASH->CR |= HASH_CR_MDMAT
+
+/**
+ * @brief Disable the multiple DMA mode.
+ * @retval None
+ */
+#define __HAL_HASH_RESET_MDMAT() HASH->CR &= (uint32_t)(~HASH_CR_MDMAT)
+
+/**
+ * @brief Start the digest computation
+ * @retval None
+ */
+#define __HAL_HASH_START_DIGEST() HASH->STR |= HASH_STR_DCAL
+
+/**
+ * @brief Set the number of valid bits in last word written in Data register
+ * @param SIZE: size in byte of last data written in Data register.
+ * @retval None
+*/
+#define __HAL_HASH_SET_NBVALIDBITS(SIZE) do{HASH->STR &= ~(HASH_STR_NBLW);\
+ HASH->STR |= 8U * ((SIZE) % 4U);\
+ }while(0)
+
+/**
+ * @}
+ */
+
+/* Include HASH HAL Extension module */
+#include "stm32f4xx_hal_hash_ex.h"
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASH_Exported_Functions HASH Exported Functions
+ * @{
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group3
+ * @{
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group4
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group5
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group6
+ * @{
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group7
+ * @{
+ */
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group8
+ * @{
+ */
+HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASH_Private_Types HASH Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Variables HASH Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Constants HASH Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASH_Private_Macros HASH Private Macros
+ * @{
+ */
+#define IS_HASH_ALGOSELECTION(__ALGOSELECTION__) (((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA1) || \
+ ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA224) || \
+ ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA256) || \
+ ((__ALGOSELECTION__) == HASH_ALGOSELECTION_MD5))
+
+
+#define IS_HASH_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == HASH_ALGOMODE_HASH) || \
+ ((__ALGOMODE__) == HASH_ALGOMODE_HMAC))
+
+
+#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_DATATYPE_32B)|| \
+ ((__DATATYPE__) == HASH_DATATYPE_16B)|| \
+ ((__DATATYPE__) == HASH_DATATYPE_8B) || \
+ ((__DATATYPE__) == HASH_DATATYPE_1B))
+
+
+#define IS_HASH_HMAC_KEYTYPE(__KEYTYPE__) (((__KEYTYPE__) == HASH_HMAC_KEYTYPE_SHORTKEY) || \
+ ((__KEYTYPE__) == HASH_HMAC_KEYTYPE_LONGKEY))
+
+#define IS_HASH_SHA1_BUFFER_SIZE(__SIZE__) ((((__SIZE__)%4) != 0U)? 0U: 1U)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_HASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1638 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief HASH HAL Extension module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of HASH peripheral:
+ * + Extended HASH processing functions based on SHA224 Algorithm
+ * + Extended HASH processing functions based on SHA256 Algorithm
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The HASH HAL driver can be used as follows:
+ (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
+ (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
+ (##) In case of using processing APIs based on interrupts (e.g. HAL_HMACEx_SHA224_Start())
+ (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
+ (##) In case of using DMA to control data transfer (e.g. HAL_HMACEx_SH224_Start_DMA())
+ (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+ (+++) Configure and enable one DMA stream one for managing data transfer from
+ memory to peripheral (input stream). Managing data transfer from
+ peripheral to memory can be performed only using CPU
+ (+++) Associate the initialized DMA handle to the HASH DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA Stream: HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+ (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
+ (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
+ (##) For HMAC, the encryption key.
+ (##) For HMAC, the key size used for encryption.
+ (#)Three processing functions are available:
+ (##) Polling mode: processing APIs are blocking functions
+ i.e. they process the data and wait till the digest computation is finished
+ e.g. HAL_HASHEx_SHA224_Start()
+ (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+ i.e. they process the data under interrupt
+ e.g. HAL_HASHEx_SHA224_Start_IT()
+ (##) DMA mode: processing APIs are not blocking functions and the CPU is
+ not used for data transfer i.e. the data transfer is ensured by DMA
+ e.g. HAL_HASHEx_SHA224_Start_DMA()
+ (#)When the processing function is called at first time after HAL_HASH_Init()
+ the HASH peripheral is initialized and processes the buffer in input.
+ After that, the digest computation is started.
+ When processing multi-buffer use the accumulate function to write the
+ data in the peripheral without starting the digest computation. In last
+ buffer use the start function to input the last buffer ans start the digest
+ computation.
+ (##) e.g. HAL_HASHEx_SHA224_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
+ (##) write (n-1)th data buffer in the peripheral without starting the digest computation
+ (##) HAL_HASHEx_SHA224_Start() : write (n)th data buffer in the peripheral and start the digest computation
+ (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
+ (#)In case of using DMA, call the DMA start processing e.g. HAL_HASHEx_SHA224_Start_DMA().
+ After that, call the finish function in order to get the digest value
+ e.g. HAL_HASHEx_SHA224_Finish()
+ (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HASHEx HASHEx
+ * @brief HASH Extension HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+
+#if defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup HASHEx_Private_Functions
+ * @{
+ */
+static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size);
+static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
+static void HASHEx_DMAError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup HASHEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Writes the input buffer in data register.
+ * @param pInBuffer: Pointer to input buffer
+ * @param Size: The size of input buffer
+ * @retval None
+ */
+static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t buffercounter;
+ uint32_t inputaddr = (uint32_t) pInBuffer;
+
+ for(buffercounter = 0U; buffercounter < Size; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+}
+
+/**
+ * @brief Provides the message digest result.
+ * @param pMsgDigest: Pointer to the message digest
+ * @param Size: The size of the message digest in bytes
+ * @retval None
+ */
+static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
+{
+ uint32_t msgdigest = (uint32_t)pMsgDigest;
+
+ switch(Size)
+ {
+ case 16U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ break;
+ case 20U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ break;
+ case 28U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6U]);
+ break;
+ case 32U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7U]);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief DMA HASH Input Data complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ uint32_t inputaddr = 0U;
+ uint32_t buffersize = 0U;
+
+ if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
+ {
+ /* Disable the DMA transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ else
+ {
+ /* Increment Interrupt counter */
+ hhash->HashInCount++;
+ /* Disable the DMA transfer before starting the next transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ if(hhash->HashInCount <= 2U)
+ {
+ /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
+ if(hhash->HashInCount == 1U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ buffersize = hhash->HashBuffSize;
+ }
+ /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
+ else if(hhash->HashInCount == 2U)
+ {
+ inputaddr = (uint32_t)hhash->Init.pKey;
+ buffersize = hhash->Init.KeySize;
+ }
+ /* Configure the number of valid bits in last word of the message */
+ MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8U * (buffersize % 4U));
+
+ /* Set the HASH DMA transfer complete */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4U ? (buffersize+3U)/4U:buffersize/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+ }
+ else
+ {
+ /* Disable the DMA transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ /* Reset the InCount */
+ hhash->HashInCount = 0U;
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+}
+
+/**
+ * @brief DMA HASH communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void HASHEx_DMAError(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hhash->State= HAL_HASH_STATE_READY;
+ HAL_HASH_ErrorCallback(hhash);
+}
+
+ /**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HASHEx_Exported_Functions
+ * @{
+ */
+
+/** @defgroup HASHEx_Group1 HASH processing functions
+ * @brief processing functions using polling mode
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using polling mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the hash value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in SHA224 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 28U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+ The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 32U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the HASH peripheral in SHA224 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+ The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Group2 HMAC processing functions using polling mode
+ * @brief HMAC processing functions using polling mode .
+ *
+@verbatim
+ ===============================================================================
+ ##### HMAC processing using polling mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the HMAC value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA224 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA224 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC SHA224 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /************************** STEP 1 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 2 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 3 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 28U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA256 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA256 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
+ }
+ else
+ {
+ /* Select the HMAC SHA256 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
+ }
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /************************** STEP 1 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 2 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 3 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 32U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Group3 HASH processing functions using interrupt mode
+ * @brief processing functions using interrupt mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using interrupt functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in interrupt mode
+ the hash value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in SHA224 mode then processes pInBuffer.
+ * The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+ uint32_t inputaddr;
+ uint32_t buffercounter;
+ uint32_t inputcounter;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ if(hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ hhash->HashInCount = Size;
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->pHashOutBuffPtr = pOutBuffer;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA224 mode */
+ HASH->CR |= HASH_ALGOSELECTION_SHA224;
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+ /* Reset interrupt counter */
+ hhash->HashITCounter = 0U;
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+ {
+ /* Read the message digest */
+ HASHEx_GetDigest(hhash->pHashOutBuffPtr, 28U);
+ if(hhash->HashInCount == 0U)
+ {
+ /* Disable Interrupts */
+ HASH->IMR = 0U;
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Call digest computation complete callback */
+ HAL_HASH_DgstCpltCallback(hhash);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ if(hhash->HashInCount >= 68U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < 64U; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ if(hhash->HashITCounter == 0U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+
+ if(hhash->HashInCount >= 68U)
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 68U;
+ hhash->pHashInBuffPtr+= 68U;
+ }
+ else
+ {
+ hhash->HashInCount = 0U;
+ hhash->pHashInBuffPtr+= hhash->HashInCount;
+ }
+ /* Set Interrupt counter */
+ hhash->HashITCounter = 1U;
+ }
+ else
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 64U;
+ hhash->pHashInBuffPtr+= 64U;
+ }
+ }
+ else
+ {
+ /* Get the buffer address */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Get the buffer counter */
+ inputcounter = hhash->HashInCount;
+ /* Disable Interrupts */
+ HASH->IMR &= ~(HASH_IT_DINI);
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+ if((inputcounter > 4U) && (inputcounter%4U))
+ {
+ inputcounter = (inputcounter+4U-inputcounter%4U);
+ }
+ else if ((inputcounter < 4U) && (inputcounter != 0U))
+ {
+ inputcounter = 4U;
+ }
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < inputcounter/4U; buffercounter++)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Reset buffer counter */
+ hhash->HashInCount = 0U;
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+ * The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+ uint32_t inputaddr;
+ uint32_t buffercounter;
+ uint32_t inputcounter;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ if(hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ hhash->HashInCount = Size;
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->pHashOutBuffPtr = pOutBuffer;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA256 mode */
+ HASH->CR |= HASH_ALGOSELECTION_SHA256;
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+ /* Reset interrupt counter */
+ hhash->HashITCounter = 0U;
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+ {
+ /* Read the message digest */
+ HASHEx_GetDigest(hhash->pHashOutBuffPtr, 32U);
+ if(hhash->HashInCount == 0U)
+ {
+ /* Disable Interrupts */
+ HASH->IMR = 0U;
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Call digest computation complete callback */
+ HAL_HASH_DgstCpltCallback(hhash);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ if(hhash->HashInCount >= 68U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < 64U; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ if(hhash->HashITCounter == 0U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+
+ if(hhash->HashInCount >= 68U)
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 68U;
+ hhash->pHashInBuffPtr+= 68U;
+ }
+ else
+ {
+ hhash->HashInCount = 0U;
+ hhash->pHashInBuffPtr+= hhash->HashInCount;
+ }
+ /* Set Interrupt counter */
+ hhash->HashITCounter = 1U;
+ }
+ else
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 64U;
+ hhash->pHashInBuffPtr+= 64U;
+ }
+ }
+ else
+ {
+ /* Get the buffer address */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Get the buffer counter */
+ inputcounter = hhash->HashInCount;
+ /* Disable Interrupts */
+ HASH->IMR &= ~(HASH_IT_DINI);
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+ if((inputcounter > 4U) && (inputcounter%4U))
+ {
+ inputcounter = (inputcounter+4U-inputcounter%4U);
+ }
+ else if ((inputcounter < 4U) && (inputcounter != 0U))
+ {
+ inputcounter = 4U;
+ }
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < inputcounter/4U; buffercounter++)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Reset buffer counter */
+ hhash->HashInCount = 0U;
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles HASH interrupt request.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash)
+{
+ switch(HASH->CR & HASH_CR_ALGO)
+ {
+
+ case HASH_ALGOSELECTION_SHA224:
+ HAL_HASHEx_SHA224_Start_IT(hhash, NULL, 0U, NULL);
+ break;
+
+ case HASH_ALGOSELECTION_SHA256:
+ HAL_HASHEx_SHA256_Start_IT(hhash, NULL, 0U, NULL);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Group4 HASH processing functions using DMA mode
+ * @brief processing functions using DMA mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using DMA functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the hash value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Initializes the HASH peripheral in SHA224 mode then enables DMA to
+ control data transfer. Use HAL_HASH_SHA224_Finish() to get the digest.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = (uint32_t)pInBuffer;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+ }
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4U ? (Size+3U)/4U:Size/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the computed digest in SHA224
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 28U);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA256 mode then enables DMA to
+ control data transfer. Use HAL_HASH_SHA256_Finish() to get the digest.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = (uint32_t)pInBuffer;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+ }
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4U ? (Size+3U)/4U:Size/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process UnLock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the computed digest in SHA256.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 32U);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @}
+ */
+/** @defgroup HASHEx_Group5 HMAC processing functions using DMA mode
+ * @brief HMAC processing functions using DMA mode .
+ *
+@verbatim
+ ===============================================================================
+ ##### HMAC processing using DMA functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the HMAC value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA224 mode
+ * then enables DMA to control data transfer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Save buffer pointer and size in handle */
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->HashBuffSize = Size;
+ hhash->HashInCount = 0U;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA224 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC SHA224 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Get the key address */
+ inputaddr = (uint32_t)(hhash->Init.pKey);
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4U ? (hhash->Init.KeySize+3U)/4U:hhash->Init.KeySize/4U));
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA256 mode
+ * then enables DMA to control data transfer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Save buffer pointer and size in handle */
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->HashBuffSize = Size;
+ hhash->HashInCount = 0U;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA256 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
+ }
+ else
+ {
+ /* Select the HMAC SHA256 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
+ }
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Get the key address */
+ inputaddr = (uint32_t)(hhash->Init.pKey);
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4U ? (hhash->Init.KeySize+3U)/4U:hhash->Init.KeySize/4U));
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+
+#endif /* HAL_HASH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,200 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of HASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_EX_H
+#define __STM32F4xx_HAL_HASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASHEx
+ * @brief HASHEx HAL Extension module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASHEx_Exported_Functions HASHEx Exported Functions
+ * @{
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group1 HASHEx processing using polling functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group2 HMAC processing using polling functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group3 HASHEx processing using functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group4 HASHEx processing using DMA
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group5 HMAC processing using DMA
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group6 HASHEx processing functions
+ * @{
+ */
+
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Types HASHEx Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Variables HASHEx Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Constants HASHEx Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Macros HASHEx Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Functions HASHEx Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1227 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hcd.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief HCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#)Declare a HCD_HandleTypeDef handle structure, for example:
+ HCD_HandleTypeDef hhcd;
+
+ (#)Fill parameters of Init structure in HCD handle
+
+ (#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...)
+
+ (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API:
+ (##) Enable the HCD/USB Low Level interface clock using the following macros
+ (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+ (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
+ (+++) __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); (For High Speed Mode)
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure HCD pin-out
+ (##) Configure HCD NVIC interrupt
+
+ (#)Associate the Upper USB Host stack to the HAL HCD Driver:
+ (##) hhcd.pData = phost;
+
+ (#)Enable HCD transmission and reception:
+ (##) HAL_HCD_Start();
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HCD HCD
+ * @brief HCD HAL module driver
+ * @{
+ */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup HCD_Private_Functions HCD Private Functions
+ * @{
+ */
+static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd);
+static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Functions HCD Exported Functions
+ * @{
+ */
+
+/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the host driver.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd)
+{
+ /* Check the HCD handle allocation */
+ if(hhcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance));
+
+ hhcd->State = HAL_HCD_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_HCD_MspInit(hhcd);
+
+ /* Disable the Interrupts */
+ __HAL_HCD_DISABLE(hhcd);
+
+ /* Init the Core (common init.) */
+ USB_CoreInit(hhcd->Instance, hhcd->Init);
+
+ /* Force Host Mode*/
+ USB_SetCurrentMode(hhcd->Instance , USB_OTG_HOST_MODE);
+
+ /* Init Host */
+ USB_HostInit(hhcd->Instance, hhcd->Init);
+
+ hhcd->State= HAL_HCD_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize a host channel.
+ * @param hhcd: HCD handle
+ * @param ch_num: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @param epnum: Endpoint number.
+ * This parameter can be a value from 1 to 15
+ * @param dev_address : Current device address
+ * This parameter can be a value from 0 to 255
+ * @param speed: Current device speed.
+ * This parameter can be one of these values:
+ * HCD_SPEED_HIGH: High speed mode,
+ * HCD_SPEED_FULL: Full speed mode,
+ * HCD_SPEED_LOW: Low speed mode
+ * @param ep_type: Endpoint Type.
+ * This parameter can be one of these values:
+ * EP_TYPE_CTRL: Control type,
+ * EP_TYPE_ISOC: Isochronous type,
+ * EP_TYPE_BULK: Bulk type,
+ * EP_TYPE_INTR: Interrupt type
+ * @param mps: Max Packet Size.
+ * This parameter can be a value from 0 to32K
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ __HAL_LOCK(hhcd);
+
+ hhcd->hc[ch_num].dev_addr = dev_address;
+ hhcd->hc[ch_num].max_packet = mps;
+ hhcd->hc[ch_num].ch_num = ch_num;
+ hhcd->hc[ch_num].ep_type = ep_type;
+ hhcd->hc[ch_num].ep_num = epnum & 0x7FU;
+ hhcd->hc[ch_num].ep_is_in = ((epnum & 0x80U) == 0x80U);
+ hhcd->hc[ch_num].speed = speed;
+
+ status = USB_HC_Init(hhcd->Instance,
+ ch_num,
+ epnum,
+ dev_address,
+ speed,
+ ep_type,
+ mps);
+ __HAL_UNLOCK(hhcd);
+
+ return status;
+}
+
+/**
+ * @brief Halt a host channel.
+ * @param hhcd: HCD handle
+ * @param ch_num: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ __HAL_LOCK(hhcd);
+ USB_HC_Halt(hhcd->Instance, ch_num);
+ __HAL_UNLOCK(hhcd);
+
+ return status;
+}
+
+/**
+ * @brief DeInitialize the host driver.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd)
+{
+ /* Check the HCD handle allocation */
+ if(hhcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hhcd->State = HAL_HCD_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_HCD_MspDeInit(hhcd);
+
+ __HAL_HCD_DISABLE(hhcd);
+
+ hhcd->State = HAL_HCD_STATE_RESET;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the HCD MSP.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the HCD MSP.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Functions_Group2 Input and Output operation functions
+ * @brief HCD IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to manage the USB Host Data
+ Transfer
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Submit a new URB for processing.
+ * @param hhcd: HCD handle
+ * @param ch_num: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @param direction: Channel number.
+ * This parameter can be one of these values:
+ * 0 : Output / 1 : Input
+ * @param ep_type: Endpoint Type.
+ * This parameter can be one of these values:
+ * EP_TYPE_CTRL: Control type/
+ * EP_TYPE_ISOC: Isochronous type/
+ * EP_TYPE_BULK: Bulk type/
+ * EP_TYPE_INTR: Interrupt type/
+ * @param token: Endpoint Type.
+ * This parameter can be one of these values:
+ * 0: HC_PID_SETUP / 1: HC_PID_DATA1
+ * @param pbuff: pointer to URB data
+ * @param length: Length of URB data
+ * @param do_ping: activate do ping protocol (for high speed only).
+ * This parameter can be one of these values:
+ * 0 : do ping inactive / 1 : do ping active
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t direction,
+ uint8_t ep_type,
+ uint8_t token,
+ uint8_t* pbuff,
+ uint16_t length,
+ uint8_t do_ping)
+{
+ hhcd->hc[ch_num].ep_is_in = direction;
+ hhcd->hc[ch_num].ep_type = ep_type;
+
+ if(token == 0U)
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_SETUP;
+ }
+ else
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+
+ /* Manage Data Toggle */
+ switch(ep_type)
+ {
+ case EP_TYPE_CTRL:
+ if((token == 1U) && (direction == 0U)) /*send data */
+ {
+ if (length == 0U)
+ { /* For Status OUT stage, Length==0, Status Out PID = 1 */
+ hhcd->hc[ch_num].toggle_out = 1U;
+ }
+
+ /* Set the Data Toggle bit as per the Flag */
+ if (hhcd->hc[ch_num].toggle_out == 0U)
+ { /* Put the PID 0 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ { /* Put the PID 1 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ if(hhcd->hc[ch_num].urb_state != URB_NOTREADY)
+ {
+ hhcd->hc[ch_num].do_ping = do_ping;
+ }
+ }
+ break;
+
+ case EP_TYPE_BULK:
+ if(direction == 0U)
+ {
+ /* Set the Data Toggle bit as per the Flag */
+ if ( hhcd->hc[ch_num].toggle_out == 0U)
+ { /* Put the PID 0 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ { /* Put the PID 1 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ if(hhcd->hc[ch_num].urb_state != URB_NOTREADY)
+ {
+ hhcd->hc[ch_num].do_ping = do_ping;
+ }
+ }
+ else
+ {
+ if( hhcd->hc[ch_num].toggle_in == 0U)
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ }
+
+ break;
+ case EP_TYPE_INTR:
+ if(direction == 0U)
+ {
+ /* Set the Data Toggle bit as per the Flag */
+ if ( hhcd->hc[ch_num].toggle_out == 0U)
+ { /* Put the PID 0 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ { /* Put the PID 1 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ }
+ else
+ {
+ if( hhcd->hc[ch_num].toggle_in == 0U)
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ }
+ break;
+
+ case EP_TYPE_ISOC:
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ break;
+ }
+
+ hhcd->hc[ch_num].xfer_buff = pbuff;
+ hhcd->hc[ch_num].xfer_len = length;
+ hhcd->hc[ch_num].urb_state = URB_IDLE;
+ hhcd->hc[ch_num].xfer_count = 0U;
+ hhcd->hc[ch_num].ch_num = ch_num;
+ hhcd->hc[ch_num].state = HC_IDLE;
+
+ return USB_HC_StartXfer(hhcd->Instance, &(hhcd->hc[ch_num]), hhcd->Init.dma_enable);
+}
+
+/**
+ * @brief Handle HCD interrupt request.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint32_t i = 0U , interrupt = 0U;
+
+ /* Ensure that we are in device mode */
+ if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST)
+ {
+ /* Avoid spurious interrupt */
+ if(__HAL_HCD_IS_INVALID_INTERRUPT(hhcd))
+ {
+ return;
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+ {
+ /* Incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR))
+ {
+ /* Incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR);
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE))
+ {
+ /* Incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE);
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_MMIS))
+ {
+ /* Incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_MMIS);
+ }
+
+ /* Handle Host Disconnect Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT))
+ {
+
+ /* Cleanup HPRT */
+ USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ /* Handle Host Port Interrupts */
+ HAL_HCD_Disconnect_Callback(hhcd);
+ USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT);
+ }
+
+ /* Handle Host Port Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT))
+ {
+ HCD_Port_IRQHandler (hhcd);
+ }
+
+ /* Handle Host SOF Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_SOF))
+ {
+ HAL_HCD_SOF_Callback(hhcd);
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
+ }
+
+ /* Handle Host channel Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
+ {
+ interrupt = USB_HC_ReadInterrupt(hhcd->Instance);
+ for (i = 0U; i < hhcd->Init.Host_channels; i++)
+ {
+ if (interrupt & (1U << i))
+ {
+ if ((USBx_HC(i)->HCCHAR) & USB_OTG_HCCHAR_EPDIR)
+ {
+ HCD_HC_IN_IRQHandler(hhcd, i);
+ }
+ else
+ {
+ HCD_HC_OUT_IRQHandler (hhcd, i);
+ }
+ }
+ }
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
+ }
+
+ /* Handle Rx Queue Level Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL))
+ {
+ USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+ HCD_RXQLVL_IRQHandler (hhcd);
+
+ USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+ }
+ }
+}
+
+/**
+ * @brief SOF callback.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_SOF_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Connection Event callback.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_Connect_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Disconnection Event callback.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_Disconnect_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Notify URB state change callback.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @param urb_state:
+ * This parameter can be one of these values:
+ * URB_IDLE/
+ * URB_DONE/
+ * URB_NOTREADY/
+ * URB_NYET/
+ * URB_ERROR/
+ * URB_STALL/
+ * @retval None
+ */
+__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ UNUSED(chnum);
+ UNUSED(urb_state);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_HC_NotifyURBChange_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the HCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start the host driver.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd)
+{
+ __HAL_LOCK(hhcd);
+ __HAL_HCD_ENABLE(hhcd);
+ USB_DriveVbus(hhcd->Instance, 1U);
+ __HAL_UNLOCK(hhcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the host driver.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd)
+{
+ __HAL_LOCK(hhcd);
+ USB_StopHost(hhcd->Instance);
+ __HAL_UNLOCK(hhcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Reset the host port.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd)
+{
+ return (USB_ResetPort(hhcd->Instance));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the HCD handle state.
+ * @param hhcd: HCD handle
+ * @retval HAL state
+ */
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd)
+{
+ return hhcd->State;
+}
+
+/**
+ * @brief Return URB state for a channel.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval URB state.
+ * This parameter can be one of these values:
+ * URB_IDLE/
+ * URB_DONE/
+ * URB_NOTREADY/
+ * URB_NYET/
+ * URB_ERROR/
+ * URB_STALL
+ */
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ return hhcd->hc[chnum].urb_state;
+}
+
+
+/**
+ * @brief Return the last host transfer size.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval last transfer size in byte
+ */
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ return hhcd->hc[chnum].xfer_count;
+}
+
+/**
+ * @brief Return the Host Channel state.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval Host channel state
+ * This parameter can be one of these values:
+ * HC_IDLE/
+ * HC_XFRC/
+ * HC_HALTED/
+ * HC_NYET/
+ * HC_NAK/
+ * HC_STALL/
+ * HC_XACTERR/
+ * HC_BBLERR/
+ * HC_DATATGLERR
+ */
+HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ return hhcd->hc[chnum].state;
+}
+
+/**
+ * @brief Return the current Host frame number.
+ * @param hhcd: HCD handle
+ * @retval Current Host frame number
+ */
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd)
+{
+ return (USB_GetCurrentFrame(hhcd->Instance));
+}
+
+/**
+ * @brief Return the Host enumeration speed.
+ * @param hhcd: HCD handle
+ * @retval Enumeration speed
+ */
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd)
+{
+ return (USB_GetHostSpeed(hhcd->Instance));
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup HCD_Private_Functions
+ * @{
+ */
+/**
+ * @brief Handle Host Channel IN interrupt requests.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval None
+ */
+static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint32_t tmpreg = 0U;
+
+ if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_AHBERR)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_ACK)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_STALL)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ hhcd->hc[chnum].state = HC_STALL;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_DTERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ hhcd->hc[chnum].state = HC_DATATGLERR;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+ }
+
+ if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_FRMOR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_XFRC)
+ {
+
+ if (hhcd->Init.dma_enable)
+ {
+ hhcd->hc[chnum].xfer_count = hhcd->hc[chnum].xfer_len - \
+ (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ);
+ }
+
+ hhcd->hc[chnum].state = HC_XFRC;
+ hhcd->hc[chnum].ErrCnt = 0U;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+
+
+ if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+ (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+
+ }
+ else if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+ {
+ USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM;
+ hhcd->hc[chnum].urb_state = URB_DONE;
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+ }
+ hhcd->hc[chnum].toggle_in ^= 1U;
+
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_CHH)
+ {
+ __HAL_HCD_MASK_HALT_HC_INT(chnum);
+
+ if(hhcd->hc[chnum].state == HC_XFRC)
+ {
+ hhcd->hc[chnum].urb_state = URB_DONE;
+ }
+
+ else if (hhcd->hc[chnum].state == HC_STALL)
+ {
+ hhcd->hc[chnum].urb_state = URB_STALL;
+ }
+
+ else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+ (hhcd->hc[chnum].state == HC_DATATGLERR))
+ {
+ if(hhcd->hc[chnum].ErrCnt++ > 3U)
+ {
+ hhcd->hc[chnum].ErrCnt = 0U;
+ hhcd->hc[chnum].urb_state = URB_ERROR;
+ }
+ else
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+
+ /* re-activate the channel */
+ tmpreg = USBx_HC(chnum)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(chnum)->HCCHAR = tmpreg;
+ }
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_TXERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ hhcd->hc[chnum].ErrCnt++;
+ hhcd->hc[chnum].state = HC_XACTERR;
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NAK)
+ {
+ if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ }
+ else if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+ (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+ {
+ /* re-activate the channel */
+ tmpreg = USBx_HC(chnum)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(chnum)->HCCHAR = tmpreg;
+ }
+ hhcd->hc[chnum].state = HC_NAK;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ }
+}
+
+/**
+ * @brief Handle Host Channel OUT interrupt requests.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval None
+ */
+static void HCD_HC_OUT_IRQHandler (HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint32_t tmpreg = 0U;
+
+ if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_AHBERR)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_ACK)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+
+ if( hhcd->hc[chnum].do_ping == 1U)
+ {
+ hhcd->hc[chnum].state = HC_NYET;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NYET)
+ {
+ hhcd->hc[chnum].state = HC_NYET;
+ hhcd->hc[chnum].ErrCnt= 0U;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET);
+
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_FRMOR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_XFRC)
+ {
+ hhcd->hc[chnum].ErrCnt = 0U;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+ hhcd->hc[chnum].state = HC_XFRC;
+
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_STALL)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].state = HC_STALL;
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NAK)
+ {
+ hhcd->hc[chnum].ErrCnt = 0U;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].state = HC_NAK;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_TXERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].state = HC_XACTERR;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_DTERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+ hhcd->hc[chnum].state = HC_DATATGLERR;
+ }
+
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_CHH)
+ {
+ __HAL_HCD_MASK_HALT_HC_INT(chnum);
+
+ if(hhcd->hc[chnum].state == HC_XFRC)
+ {
+ hhcd->hc[chnum].urb_state = URB_DONE;
+ if (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)
+ {
+ hhcd->hc[chnum].toggle_out ^= 1U;
+ }
+ }
+ else if (hhcd->hc[chnum].state == HC_NAK)
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+
+ else if (hhcd->hc[chnum].state == HC_NYET)
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ hhcd->hc[chnum].do_ping = 0U;
+ }
+
+ else if (hhcd->hc[chnum].state == HC_STALL)
+ {
+ hhcd->hc[chnum].urb_state = URB_STALL;
+ }
+
+ else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+ (hhcd->hc[chnum].state == HC_DATATGLERR))
+ {
+ if(hhcd->hc[chnum].ErrCnt++ > 3U)
+ {
+ hhcd->hc[chnum].ErrCnt = 0U;
+ hhcd->hc[chnum].urb_state = URB_ERROR;
+ }
+ else
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+
+ /* re-activate the channel */
+ tmpreg = USBx_HC(chnum)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(chnum)->HCCHAR = tmpreg;
+ }
+
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+ }
+}
+
+/**
+ * @brief Handle Rx Queue Level interrupt requests.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint8_t channelnum = 0U;
+ uint32_t pktsts;
+ uint32_t pktcnt;
+ uint32_t temp = 0U;
+ uint32_t tmpreg = 0U;
+
+ temp = hhcd->Instance->GRXSTSP;
+ channelnum = temp & USB_OTG_GRXSTSP_EPNUM;
+ pktsts = (temp & USB_OTG_GRXSTSP_PKTSTS) >> 17U;
+ pktcnt = (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+
+ switch (pktsts)
+ {
+ case GRXSTS_PKTSTS_IN:
+ /* Read the data into the host buffer. */
+ if ((pktcnt > 0U) && (hhcd->hc[channelnum].xfer_buff != (void *)0U))
+ {
+
+ USB_ReadPacket(hhcd->Instance, hhcd->hc[channelnum].xfer_buff, pktcnt);
+
+ /*manage multiple Xfer */
+ hhcd->hc[channelnum].xfer_buff += pktcnt;
+ hhcd->hc[channelnum].xfer_count += pktcnt;
+
+ if((USBx_HC(channelnum)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) > 0U)
+ {
+ /* re-activate the channel when more packets are expected */
+ tmpreg = USBx_HC(channelnum)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(channelnum)->HCCHAR = tmpreg;
+ hhcd->hc[channelnum].toggle_in ^= 1U;
+ }
+ }
+ break;
+
+ case GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
+ break;
+ case GRXSTS_PKTSTS_IN_XFER_COMP:
+ case GRXSTS_PKTSTS_CH_HALTED:
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Handle Host Port interrupt requests.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+static void HCD_Port_IRQHandler (HCD_HandleTypeDef *hhcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ __IO uint32_t hprt0, hprt0_dup;
+
+ /* Handle Host Port Interrupts */
+ hprt0 = USBx_HPRT0;
+ hprt0_dup = USBx_HPRT0;
+
+ hprt0_dup &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ /* Check whether Port Connect Detected */
+ if((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET)
+ {
+ if((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS)
+ {
+ USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
+ HAL_HCD_Connect_Callback(hhcd);
+ }
+ hprt0_dup |= USB_OTG_HPRT_PCDET;
+
+ }
+
+ /* Check whether Port Enable Changed */
+ if((hprt0 & USB_OTG_HPRT_PENCHNG) == USB_OTG_HPRT_PENCHNG)
+ {
+ hprt0_dup |= USB_OTG_HPRT_PENCHNG;
+
+ if((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA)
+ {
+ if(hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY)
+ {
+ if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17U))
+ {
+ USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_6_MHZ );
+ }
+ else
+ {
+ USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
+ }
+ }
+ else
+ {
+ if(hhcd->Init.speed == HCD_SPEED_FULL)
+ {
+ USBx_HOST->HFIR = (uint32_t)60000U;
+ }
+ }
+
+ HAL_HCD_Connect_Callback(hhcd);
+ }
+ else
+ {
+ /* Clean up HPRT */
+ USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
+ }
+ }
+
+ /* Check for an over current */
+ if((hprt0 & USB_OTG_HPRT_POCCHNG) == USB_OTG_HPRT_POCCHNG)
+ {
+ hprt0_dup |= USB_OTG_HPRT_POCCHNG;
+ }
+
+ /* Clear Port Interrupts */
+ USBx_HPRT0 = hprt0_dup;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* HAL_HCD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,262 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hcd.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of HCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HCD_H
+#define __STM32F4xx_HAL_HCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Types HCD Exported Types
+ * @{
+ */
+
+/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition
+ * @{
+ */
+typedef enum
+{
+ HAL_HCD_STATE_RESET = 0x00U,
+ HAL_HCD_STATE_READY = 0x01U,
+ HAL_HCD_STATE_ERROR = 0x02U,
+ HAL_HCD_STATE_BUSY = 0x03U,
+ HAL_HCD_STATE_TIMEOUT = 0x04U
+} HCD_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef HCD_TypeDef;
+typedef USB_OTG_CfgTypeDef HCD_InitTypeDef;
+typedef USB_OTG_HCTypeDef HCD_HCTypeDef ;
+typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef ;
+typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef ;
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition
+ * @{
+ */
+typedef struct
+{
+ HCD_TypeDef *Instance; /*!< Register base address */
+ HCD_InitTypeDef Init; /*!< HCD required parameters */
+ HCD_HCTypeDef hc[15]; /*!< Host channels parameters */
+ HAL_LockTypeDef Lock; /*!< HCD peripheral status */
+ __IO HCD_StateTypeDef State; /*!< HCD communication state */
+ void *pData; /*!< Pointer Stack Handler */
+} HCD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Constants HCD Exported Constants
+ * @{
+ */
+
+/** @defgroup HCD_Speed HCD Speed
+ * @{
+ */
+#define HCD_SPEED_HIGH 0U
+#define HCD_SPEED_LOW 2U
+#define HCD_SPEED_FULL 3U
+/**
+ * @}
+ */
+
+/** @defgroup HCD_PHY_Module HCD PHY Module
+ * @{
+ */
+#define HCD_PHY_ULPI 1U
+#define HCD_PHY_EMBEDDED 2U
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Macros HCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_HCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_HCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
+#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
+#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HCD_Exported_Functions HCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num);
+
+void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/** @addtogroup HCD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+ uint8_t pipe,
+ uint8_t direction,
+ uint8_t ep_type,
+ uint8_t token,
+ uint8_t* pbuff,
+ uint16_t length,
+ uint8_t do_ping);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd,
+ uint8_t chnum,
+ HCD_URBStateTypeDef urb_state);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HCD_Private_Macros HCD Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,5314 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief I2C HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (I2C) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The I2C HAL driver can be used as follows:
+
+ (#) Declare a I2C_HandleTypeDef handle structure, for example:
+ I2C_HandleTypeDef hi2c;
+
+ (#)Initialize the I2C low level resources by implement the HAL_I2C_MspInit() API:
+ (##) Enable the I2Cx interface clock
+ (##) I2C pins configuration
+ (+++) Enable the clock for the I2C GPIOs
+ (+++) Configure I2C pins as alternate function open-drain
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the I2Cx interrupt priority
+ (+++) Enable the NVIC I2C IRQ Channel
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx Stream
+ (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+ the DMA Tx or Rx Stream
+
+ (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1,
+ Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure.
+
+ (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware
+ (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
+
+ (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
+ (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
+ (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
+ (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
+
+ *** Polling mode IO MEM operation ***
+ =====================================
+ [..]
+ (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
+ (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
+
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master mode an amount of data in non blocking mode using HAL_I2C_Master_Transmit_IT()
+ (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+ (+) Receive in master mode an amount of data in non blocking mode using HAL_I2C_Master_Receive_IT()
+ (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+ (+) Transmit in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Transmit_IT()
+ (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+ (+) Receive in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Receive_IT()
+ (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+ *** Interrupt mode IO sequential operation ***
+ ==============================================
+ [..]
+ (+@) These interfaces allow to manage a sequential transfer with a repeated start condition
+ when a direction change during transfer
+ (+) A specific option manage the different steps of a sequential transfer
+ (+) Differents steps option I2C_XferOptions_definition are listed below :
+ (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode
+ (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a start condition with data to transfer without a final stop condition
+ (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a restart condition with new data to transfer if the direction change or
+ manage only the new data to transfer if no direction change and without a final stop condition in both cases
+ (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a restart condition with new data to transfer if the direction change or
+ manage only the new data to transfer if no direction change and with a final stop condition in both cases
+
+ (+) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Transmit_IT()
+ (++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Receive_IT()
+ (++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (++) The associated previous transfer callback is called at the end of abort process
+ (++) mean HAL_I2C_MasterTxCpltCallback() in case of previous state was master transmit
+ (++) mean HAL_I2c_MasterRxCpltCallback() in case of previous state was master receive
+ (+) Enable/disable the Address listen mode in slave I2C mode
+ using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT()
+ (++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can
+ add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
+ (++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ListenCpltCallback()
+ (+) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Transmit_IT()
+ (++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Receive_IT()
+ (++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+
+
+ *** Interrupt mode IO MEM operation ***
+ =======================================
+ [..]
+ (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using
+ HAL_I2C_Mem_Write_IT()
+ (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+ (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using
+ HAL_I2C_Mem_Read_IT()
+ (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Transmit in master mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Master_Transmit_DMA()
+ (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+ (+) Receive in master mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Master_Receive_DMA()
+ (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+ (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Slave_Transmit_DMA()
+ (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+ (+) Receive in slave mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Slave_Receive_DMA()
+ (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+ *** DMA mode IO MEM operation ***
+ =================================
+ [..]
+ (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using
+ HAL_I2C_Mem_Write_DMA()
+ (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+ (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using
+ HAL_I2C_Mem_Read_DMA()
+ (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+
+ *** I2C HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in I2C HAL driver.
+
+ (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
+ (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
+ (+) __HAL_I2C_GET_FLAG: Checks whether the specified I2C flag is set or not
+ (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag
+ (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
+ (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
+
+ [..]
+ (@) You can refer to the I2C HAL driver header file for more useful macros
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2C I2C
+ * @brief I2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup I2C_Private_Constants
+ * @{
+ */
+#define I2C_TIMEOUT_FLAG ((uint32_t)35U) /*!< Timeout 35 ms */
+#define I2C_TIMEOUT_ADDR_SLAVE ((uint32_t)10000U) /*!< Timeout 10 s */
+#define I2C_TIMEOUT_BUSY_FLAG ((uint32_t)25U) /*!< Timeout 25 ms */
+#define I2C_NO_OPTION_FRAME ((uint32_t)0xFFFF0000U) /*!< XferOptions default value */
+
+/* Private define for @ref PreviousState usage */
+#define I2C_STATE_MSK ((uint32_t)((HAL_I2C_STATE_BUSY_TX | HAL_I2C_STATE_BUSY_RX) & (~(uint32_t)HAL_I2C_STATE_READY))) /*!< Mask State define, keep only RX and TX bits */
+#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */
+#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup I2C_Private_Functions
+ * @{
+ */
+/* Private functions to handle DMA transfer */
+static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma);
+
+static void I2C_ITError(I2C_HandleTypeDef *hi2c);
+
+static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c);
+
+/* Private functions for I2C transfer IRQ handler */
+static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Master_SB(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Master_ADD10(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Master_ADDR(I2C_HandleTypeDef *hi2c);
+
+static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the I2Cx peripheral:
+
+ (+) User must Implement HAL_I2C_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC).
+
+ (+) Call the function HAL_I2C_Init() to configure the selected device with
+ the selected configuration:
+ (++) Communication Speed
+ (++) Duty cycle
+ (++) Addressing mode
+ (++) Own Address 1
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) General call mode
+ (++) Nostretch mode
+
+ (+) Call the function HAL_I2C_DeInit() to restore the default configuration
+ of the selected I2Cx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2C according to the specified parameters
+ * in the I2C_InitTypeDef and create the associated handle.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t freqrange = 0U;
+ uint32_t pclk1 = 0U;
+
+ /* Check the I2C handle allocation */
+ if(hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_CLOCK_SPEED(hi2c->Init.ClockSpeed));
+ assert_param(IS_I2C_DUTY_CYCLE(hi2c->Init.DutyCycle));
+ assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+ assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+ assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+ assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+ assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+ assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+ if(hi2c->State == HAL_I2C_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2c->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_I2C_MspInit(hi2c);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Get PCLK1 frequency */
+ pclk1 = HAL_RCC_GetPCLK1Freq();
+
+ /* Calculate frequency range */
+ freqrange = I2C_FREQRANGE(pclk1);
+
+ /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+ /* Configure I2Cx: Frequency range */
+ hi2c->Instance->CR2 = freqrange;
+
+ /*---------------------------- I2Cx TRISE Configuration --------------------*/
+ /* Configure I2Cx: Rise Time */
+ hi2c->Instance->TRISE = I2C_RISE_TIME(freqrange, hi2c->Init.ClockSpeed);
+
+ /*---------------------------- I2Cx CCR Configuration ----------------------*/
+ /* Configure I2Cx: Speed */
+ hi2c->Instance->CCR = I2C_SPEED(pclk1, hi2c->Init.ClockSpeed, hi2c->Init.DutyCycle);
+
+ /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+ /* Configure I2Cx: Generalcall and NoStretch mode */
+ hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+
+ /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+ /* Configure I2Cx: Own Address1 and addressing mode */
+ hi2c->Instance->OAR1 = (hi2c->Init.AddressingMode | hi2c->Init.OwnAddress1);
+
+ /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+ /* Configure I2Cx: Dual mode and Own Address2 */
+ hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2);
+
+ /* Enable the selected I2C peripheral */
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the I2C peripheral.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if(hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the I2C Peripheral Clock */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_I2C_MspDeInit(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_RESET;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2C MSP Init.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+ __weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C MSP DeInit
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+ __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2C data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2C_Master_Transmit()
+ (++) HAL_I2C_Master_Receive()
+ (++) HAL_I2C_Slave_Transmit()
+ (++) HAL_I2C_Slave_Receive()
+ (++) HAL_I2C_Mem_Write()
+ (++) HAL_I2C_Mem_Read()
+ (++) HAL_I2C_IsDeviceReady()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2C_Master_Transmit_IT()
+ (++) HAL_I2C_Master_Receive_IT()
+ (++) HAL_I2C_Slave_Transmit_IT()
+ (++) HAL_I2C_Slave_Receive_IT()
+ (++) HAL_I2C_Master_Sequential_Transmit_IT()
+ (++) HAL_I2C_Master_Sequential_Receive_IT()
+ (++) HAL_I2C_Slave_Sequential_Transmit_IT()
+ (++) HAL_I2C_Slave_Sequential_Receive_IT()
+ (++) HAL_I2C_Mem_Write_IT()
+ (++) HAL_I2C_Mem_Read_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2C_Master_Transmit_DMA()
+ (++) HAL_I2C_Master_Receive_DMA()
+ (++) HAL_I2C_Slave_Transmit_DMA()
+ (++) HAL_I2C_Slave_Receive_DMA()
+ (++) HAL_I2C_Mem_Write_DMA()
+ (++) HAL_I2C_Mem_Read_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2C_MemTxCpltCallback()
+ (++) HAL_I2C_MemRxCpltCallback()
+ (++) HAL_I2C_MasterTxCpltCallback()
+ (++) HAL_I2C_MasterRxCpltCallback()
+ (++) HAL_I2C_SlaveTxCpltCallback()
+ (++) HAL_I2C_SlaveRxCpltCallback()
+ (++) HAL_I2C_ErrorCallback()
+ (++) HAL_I2C_AbortCpltCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Send Slave Address */
+ if(I2C_MasterRequestWrite(hi2c, DevAddress, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ while(Size > 0U)
+ {
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0U))
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+ }
+
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Send Slave Address */
+ if(I2C_MasterRequestRead(hi2c, DevAddress, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ if(Size == 0U)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(Size == 1U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(Size == 2U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Enable Pos */
+ hi2c->Instance->CR1 |= I2C_CR1_POS;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ while(Size > 0U)
+ {
+ if(Size <= 3U)
+ {
+ /* One byte */
+ if(Size == 1U)
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ /* Two bytes */
+ else if(Size == 2U)
+ {
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ /* 3 Last bytes */
+ else
+ {
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+ else
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET)
+ {
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+ }
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmits in slave mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* If 10bit addressing mode is selected */
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ while(Size > 0U)
+ {
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0U))
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+ }
+ }
+
+ /* Wait until AF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in blocking mode
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ while(Size > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0U))
+ {
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+
+ /* Wait until STOP flag is set */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_STOPFLAG(hi2c);
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->Devaddress = DevAddress;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->Devaddress = DevAddress;
+
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in master mode an amount of data in no-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t Prev_State = 0x00U;
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Check Busy Flag only if FIRST call of Master interface */
+ if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->Devaddress = DevAddress;
+
+ Prev_State = hi2c->PreviousState;
+
+ /* Generate Start */
+ if((Prev_State == I2C_STATE_MASTER_BUSY_RX) || (Prev_State == I2C_STATE_NONE))
+ {
+ /* Generate Start condition if first transfer */
+ if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(Prev_State == I2C_STATE_MASTER_BUSY_RX)
+ {
+ /* Generate ReStart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in master mode an amount of data in no-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t Prev_State = 0x00U;
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Check Busy Flag only if FIRST call of Master interface */
+ if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->Devaddress = DevAddress;
+
+ Prev_State = hi2c->PreviousState;
+
+ if((Prev_State == I2C_STATE_MASTER_BUSY_TX) || (Prev_State == I2C_STATE_NONE))
+ {
+ /* Generate Start condition if first transfer */
+ if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_NO_OPTION_FRAME))
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(Prev_State == I2C_STATE_MASTER_BUSY_TX)
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate ReStart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in slave mode an amount of data in no-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in slave mode an amount of data in no-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Enable EVT and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of tmp to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+
+ /* Disable Address listen mode only if a transfer is not ongoing */
+ if(hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Disable EVT and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in no-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0x00U;
+
+ __IO uint32_t count = 0U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferM1CpltCallback = NULL;
+ hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
+
+ /* Send Slave Address */
+ if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+ }
+ else
+ {
+ /* Send Slave Address */
+ if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in no-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0x00U;
+
+ __IO uint32_t count = 0U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferM1CpltCallback = NULL;
+ hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
+
+ /* Send Slave Address */
+ if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ if(Size == 1U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Last DMA bit */
+ hi2c->Instance->CR2 |= I2C_CR2_LAST;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+ }
+ else
+ {
+ /* Send Slave Address */
+ if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Abort a master I2C process communication with Interrupt.
+ * @note This abort can be called only if state is ready
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress)
+{
+ /* Abort Master transfer during Receive or Transmit process */
+ if(hi2c->Mode == HAL_I2C_MODE_MASTER)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_ABORT;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->XferCount = 0U;
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ if(hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Call the Abort Complete callback */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wrong usage of abort function */
+ /* This function should be used only in case of abort monitored by master device */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in no-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferM1CpltCallback = NULL;
+ hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
+
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Wait until ADDR flag is set */
+ count = I2C_TIMEOUT_ADDR_SLAVE * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == RESET);
+
+ /* If 7bit addressing mode is selected */
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Wait until ADDR flag is set */
+ count = I2C_TIMEOUT_ADDR_SLAVE * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == RESET);
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in no-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferM1CpltCallback = NULL;
+ hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
+
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Wait until ADDR flag is set */
+ count = I2C_TIMEOUT_ADDR_SLAVE * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == RESET);
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in blocking mode to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ while(Size > 0U)
+ {
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+ }
+ }
+
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in blocking mode from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ if(Size == 0U)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(Size == 1U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(Size == 2U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Enable Pos */
+ hi2c->Instance->CR1 |= I2C_CR1_POS;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ while(Size > 0U)
+ {
+ if(Size <= 3U)
+ {
+ /* One byte */
+ if(Size== 1U)
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ /* Two bytes */
+ else if(Size == 2U)
+ {
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ /* 3 Last bytes */
+ else
+ {
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+ else
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET)
+ {
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+ }
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Write an amount of data in no-blocking mode with Interrupt to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->Devaddress = DevAddress;
+ hi2c->Memaddress = MemAddress;
+ hi2c->MemaddSize = MemAddSize;
+ hi2c->EventCount = 0U;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in no-blocking mode with Interrupt from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->Devaddress = DevAddress;
+ hi2c->Memaddress = MemAddress;
+ hi2c->MemaddSize = MemAddSize;
+ hi2c->EventCount = 0U;
+
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Write an amount of data in no-blocking mode with DMA to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferM1CpltCallback = NULL;
+ hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+ }
+ else
+ {
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads an amount of data in no-blocking mode with DMA from a specific memory address.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferM1CpltCallback = NULL;
+ hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ if(Size == 1U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Last DMA bit */
+ hi2c->Instance->CR2 |= I2C_CR2_LAST;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+ }
+ else
+ {
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param Trials Number of trials
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U, tmp1 = 0U, tmp2 = 0U, tmp3 = 0U, I2C_Trials = 1U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ do
+ {
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+
+ /* Wait until ADDR or AF flag are set */
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
+ tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
+ tmp3 = hi2c->State;
+ while((tmp1 == RESET) && (tmp2 == RESET) && (tmp3 != HAL_I2C_STATE_TIMEOUT))
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_TIMEOUT;
+ }
+ tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
+ tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
+ tmp3 = hi2c->State;
+ }
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Check if the ADDR flag has been set */
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Clear ADDR Flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Clear AF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }while(I2C_Trials++ < Trials);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles I2C event interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t sr2itflags = READ_REG(hi2c->Instance->SR2);
+ uint32_t sr1itflags = READ_REG(hi2c->Instance->SR1);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR2);
+
+ uint32_t CurrentMode = hi2c->Mode;
+
+ /* Master or Memory mode selected */
+ if((CurrentMode == HAL_I2C_MODE_MASTER) || (CurrentMode == HAL_I2C_MODE_MEM))
+ {
+ /* SB Set ----------------------------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_SB) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Master_SB(hi2c);
+ }
+ /* ADD10 Set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_ADD10) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Master_ADD10(hi2c);
+ }
+ /* ADDR Set --------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_ADDR) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Master_ADDR(hi2c);
+ }
+
+ /* I2C in mode Transmitter -----------------------------------------------*/
+ if((sr2itflags & I2C_FLAG_TRA) != RESET)
+ {
+ /* TXE set and BTF reset -----------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_TXE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET))
+ {
+ I2C_MasterTransmit_TXE(hi2c);
+ }
+ /* BTF set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_MasterTransmit_BTF(hi2c);
+ }
+ }
+ /* I2C in mode Receiver --------------------------------------------------*/
+ else
+ {
+ /* RXNE set and BTF reset -----------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_RXNE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET))
+ {
+ I2C_MasterReceive_RXNE(hi2c);
+ }
+ /* BTF set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_MasterReceive_BTF(hi2c);
+ }
+ }
+ }
+ /* Slave mode selected */
+ else
+ {
+ /* ADDR set --------------------------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_ADDR) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Slave_ADDR(hi2c);
+ }
+ /* STOPF set --------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_STOPF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Slave_STOPF(hi2c);
+ }
+ /* I2C in mode Transmitter -----------------------------------------------*/
+ else if((sr2itflags & I2C_FLAG_TRA) != RESET)
+ {
+ /* TXE set and BTF reset -----------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_TXE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET))
+ {
+ I2C_SlaveTransmit_TXE(hi2c);
+ }
+ /* BTF set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_SlaveTransmit_BTF(hi2c);
+ }
+ }
+ /* I2C in mode Receiver --------------------------------------------------*/
+ else
+ {
+ /* RXNE set and BTF reset ----------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_RXNE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET))
+ {
+ I2C_SlaveReceive_RXNE(hi2c);
+ }
+ /* BTF set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_SlaveReceive_BTF(hi2c);
+ }
+ }
+ }
+}
+
+/**
+ * @brief This function handles I2C error interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U, tmp3 = 0U, tmp4 = 0U;
+ uint32_t sr1itflags = READ_REG(hi2c->Instance->SR1);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR2);
+
+ /* I2C Bus error interrupt occurred ----------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_BERR) != RESET) && ((itsources & I2C_IT_ERR) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+ }
+
+ /* I2C Arbitration Loss error interrupt occurred ---------------------------*/
+ if(((sr1itflags & I2C_FLAG_ARLO) != RESET) && ((itsources & I2C_IT_ERR) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+ }
+
+ /* I2C Acknowledge failure error interrupt occurred ------------------------*/
+ if(((sr1itflags & I2C_FLAG_AF) != RESET) && ((itsources & I2C_IT_ERR) != RESET))
+ {
+ tmp1 = hi2c->Mode;
+ tmp2 = hi2c->XferCount;
+ tmp3 = hi2c->State;
+ tmp4 = hi2c->PreviousState;
+ if((tmp1 == HAL_I2C_MODE_SLAVE) && (tmp2 == 0U) && \
+ ((tmp3 == HAL_I2C_STATE_BUSY_TX) || (tmp3 == HAL_I2C_STATE_BUSY_TX_LISTEN) || \
+ ((tmp3 == HAL_I2C_STATE_LISTEN) && (tmp4 == I2C_STATE_SLAVE_BUSY_TX))))
+ {
+ I2C_Slave_AF(hi2c);
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* Generate Stop */
+ SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP);
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ }
+ }
+
+ /* I2C Over-Run/Under-Run interrupt occurred -------------------------------*/
+ if(((sr1itflags & I2C_FLAG_OVR) != RESET) && ((itsources & I2C_IT_ERR) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+ /* Clear OVR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+ }
+
+ /* Call the Error Callback in case of Error detected -----------------------*/
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ I2C_ITError(hi2c);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterTxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterRxCpltCallback can be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveTxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveRxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Address Match callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XferOptions_definition
+ * @param AddrMatchCode Address Match Code
+ * @retval None
+ */
+__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ UNUSED(TransferDirection);
+ UNUSED(AddrMatchCode);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AddrCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Listen Complete callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ListenCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Tx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemTxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Rx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemRxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C error callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C abort callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State, Mode and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the I2C state.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL state
+ */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->State;
+}
+
+/**
+ * @brief Returns the I2C Master, Slave, Memory or no mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL mode
+ */
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->Mode;
+}
+
+/**
+ * @brief Return the I2C error code
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval I2C Error Code
+ */
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Handle TXE flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+ uint32_t CurrentMode = hi2c->Mode;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+ uint32_t tmp;
+
+ if((hi2c->XferSize == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX))
+ {
+ /* Call TxCpltCallback() directly if no stop mode is set */
+ if((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME))
+ {
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ else /* Generate Stop condition then Call TxCpltCallback() */
+ {
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+ }
+ else if((CurrentState == HAL_I2C_STATE_BUSY_TX) || \
+ ((CurrentMode == HAL_I2C_MODE_MEM) && (CurrentState == HAL_I2C_STATE_BUSY_RX)))
+ {
+ if(hi2c->XferCount == 0U)
+ {
+ /* Disable BUF interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+ }
+ else
+ {
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ if(hi2c->EventCount == 0)
+ {
+ /* If Memory address size is 8Bit */
+ if(hi2c->MemaddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(hi2c->Memaddress);
+
+ hi2c->EventCount += 2;
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_MSB(hi2c->Memaddress);
+
+ hi2c->EventCount++;
+ }
+ }
+ else if(hi2c->EventCount == 1)
+ {
+ /* Send LSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(hi2c->Memaddress);
+
+ hi2c->EventCount++;
+ }
+ else if(hi2c->EventCount == 2)
+ {
+ if(hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ /* Generate Restart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+ }
+ }
+ else
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle BTF flag for Master transmitter
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+
+ if(hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ if(hi2c->XferCount != 0U)
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+ else
+ {
+ /* Call TxCpltCallback() directly if no stop mode is set */
+ if((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME))
+ {
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ else /* Generate Stop condition then Call TxCpltCallback() */
+ {
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle RXNE flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ uint32_t tmp = 0U;
+
+ tmp = hi2c->XferCount;
+ if(tmp > 3U)
+ {
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+ }
+ else if((tmp == 2U) || (tmp == 3U))
+ {
+ if(hi2c->XferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Enable Pos */
+ hi2c->Instance->CR1 |= I2C_CR1_POS;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+ /* Disable BUF interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+ }
+ else
+ {
+ if(hi2c->XferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle BTF flag for Master receiver
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+
+ if(hi2c->XferCount == 3U)
+ {
+ if((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME))
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+ }
+ else if(hi2c->XferCount == 2U)
+ {
+ /* Prepare next transfer or stop current transfer */
+ if((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME))
+ {
+ if(CurrentXferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ }
+ else
+ {
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+
+ /* Disable EVT and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+ else
+ {
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle SB flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+
+static HAL_StatusTypeDef I2C_Master_SB(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ if(hi2c->EventCount == 0U)
+ {
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress);
+ }
+ else
+ {
+ hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress);
+ }
+ }
+ else
+ {
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ /* Send slave 7 Bits address */
+ if(hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress);
+ }
+ else
+ {
+ hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress);
+ }
+ }
+ else
+ {
+ if(hi2c->EventCount == 0U)
+ {
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(hi2c->Devaddress);
+ }
+ else if(hi2c->EventCount == 1U)
+ {
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_READ(hi2c->Devaddress);
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle ADD10 flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ADD10(I2C_HandleTypeDef *hi2c)
+{
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_10BIT_ADDRESS(hi2c->Devaddress);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle ADDR flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ADDR(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentMode = hi2c->Mode;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+ uint32_t Prev_State = hi2c->PreviousState;
+
+ if(hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ if((hi2c->EventCount == 0U) && (CurrentMode == HAL_I2C_MODE_MEM))
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else if((hi2c->EventCount == 0U) && (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT))
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Restart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ hi2c->EventCount++;
+ }
+ else
+ {
+ if(hi2c->XferCount == 0U)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(hi2c->XferCount == 1U)
+ {
+ /* Prepare next transfer or stop current transfer */
+ if((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) \
+ && (Prev_State != I2C_STATE_MASTER_BUSY_RX))
+ {
+ if(hi2c->XferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ }
+ else if(hi2c->XferCount == 2U)
+ {
+ if(hi2c->XferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Enable Pos */
+ hi2c->Instance->CR1 |= I2C_CR1_POS;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ /* Reset Event counter */
+ hi2c->EventCount = 0;
+ }
+ }
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle TXE flag for Slave
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+ uint32_t CurrentState = hi2c->State;
+
+ if(hi2c->XferCount != 0U)
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+
+ if((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN))
+ {
+ /* Last Byte is received, disable Interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+
+ /* Set state at HAL_I2C_STATE_LISTEN */
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+
+ /* Call the Tx complete callback to inform upper layer of the end of receive process */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle BTF flag for Slave transmitter
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->XferCount != 0U)
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle RXNE flag for Slave
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+ uint32_t CurrentState = hi2c->State;
+
+ if(hi2c->XferCount != 0U)
+ {
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+
+ if((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* Last Byte is received, disable Interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+
+ /* Set state at HAL_I2C_STATE_LISTEN */
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+
+ /* Call the Rx complete callback to inform upper layer of the end of receive process */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle BTF flag for Slave receiver
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->XferCount != 0U)
+ {
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle ADD flag for Slave
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c)
+{
+ uint8_t TransferDirection = I2C_DIRECTION_RECEIVE;
+ uint16_t SlaveAddrCode = 0U;
+
+ /* Transfer Direction requested by Master */
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA) == RESET)
+ {
+ TransferDirection = I2C_DIRECTION_TRANSMIT;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_DUALF) == RESET)
+ {
+ SlaveAddrCode = hi2c->Init.OwnAddress1;
+ }
+ else
+ {
+ SlaveAddrCode = hi2c->Init.OwnAddress2;
+ }
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, TransferDirection, SlaveAddrCode);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle STOPF flag for Slave
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Clear STOPF flag */
+ __HAL_I2C_CLEAR_STOPFLAG(hi2c);
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ if((CurrentState == HAL_I2C_STATE_LISTEN ) || (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN) || \
+ (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN))
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+ else
+ {
+ if((hi2c->PreviousState == I2C_STATE_SLAVE_BUSY_RX) || (CurrentState == HAL_I2C_STATE_BUSY_RX))
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+ uint32_t tmp;
+
+ if(((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME)) && \
+ (CurrentState == HAL_I2C_STATE_LISTEN))
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+ else if(CurrentState == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Clear AF flag only */
+ /* State Listen, but XferOptions == FIRST or NEXT */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2C interrupts error process
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITError(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+
+ if((CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN) || (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* keep HAL_I2C_STATE_LISTEN */
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ }
+ else
+ {
+ /* If state is an abort treatment on going, don't change state */
+ /* This change will be do later */
+ if(hi2c->State != HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ }
+
+ /* Disable Pos bit in I2C CR1 when error occurred in Master/Mem Receive IT Process */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ /* Abort DMA transfer */
+ if((hi2c->Instance->CR1 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN)
+ {
+ hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+ if(hi2c->hdmatx != NULL)
+ {
+ /* Set the DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+ if(HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+ }
+ }
+ else if(hi2c->hdmarx != NULL)
+ {
+ /* Set the DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+ if(HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+ {
+ /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */
+ hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+ }
+ }
+ }
+ else if(hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ /* STOP Flag is not set after a NACK reception */
+ /* So may inform upper layer that listen phase is stopped */
+ /* during NACK error treatment */
+ if((hi2c->State == HAL_I2C_STATE_LISTEN) && ((hi2c->ErrorCode & HAL_I2C_ERROR_AF) == HAL_I2C_ERROR_AF))
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+
+ /* Generate Start condition if first transfer */
+ if((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME))
+ {
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX)
+ {
+ /* Generate ReStart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+ }
+ else
+ {
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
+
+ /* Wait until ADD10 flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
+ }
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address for read request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+
+ /* Generate Start condition if first transfer */
+ if((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME))
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX)
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate ReStart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress);
+ }
+ else
+ {
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
+
+ /* Wait until ADD10 flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Restart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress);
+ }
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for write request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for read request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Generate Restart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress);
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DMA I2C process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+ uint32_t CurrentMode = hi2c->Mode;
+
+ if((CurrentState == HAL_I2C_STATE_BUSY_TX) || ((CurrentState == HAL_I2C_STATE_BUSY_RX) && (CurrentMode == HAL_I2C_MODE_SLAVE)))
+ {
+ /* Disable DMA Request */
+ hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+ hi2c->XferCount = 0U;
+
+ /* Enable EVT and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
+ }
+ else
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Disable Last DMA */
+ hi2c->Instance->CR2 &= ~I2C_CR2_LAST;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+ hi2c->XferCount = 0U;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+ }
+}
+
+/**
+ * @brief DMA I2C communication error callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->XferCount = 0U;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+ HAL_I2C_ErrorCallback(hi2c);
+}
+
+/**
+ * @brief DMA I2C communication abort callback
+ * (To be called at end of DMA Abort procedure).
+ * @param hdma: DMA handle.
+ * @retval None
+ */
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = ( I2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->XferCount = 0U;
+
+ /* Reset XferAbortCallback */
+ hi2c->hdmatx->XferAbortCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Check if come from abort from user */
+ if(hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param Flag specifies the I2C flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Wait until flag is set */
+ while((__HAL_I2C_GET_FLAG(hi2c, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for Master addressing phase.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param Flag specifies the I2C flag to check.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET)
+ {
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Clear AF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of TXE flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(I2C_IsAcknowledgeFailed(hi2c) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of BTF flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(I2C_IsAcknowledgeFailed(hi2c) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of STOP flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(I2C_IsAcknowledgeFailed(hi2c) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
+ {
+ /* Check if a STOPF is detected */
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Acknowledge failed detection during an I2C Communication.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c)
+{
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Clear NACKF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,651 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_H
+#define __STM32F4xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2C Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSpeed; /*!< Specifies the clock frequency.
+ This parameter must be set to a value lower than 400kHz */
+
+ uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
+ This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_general_call_addressing_mode */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+ * @brief HAL State structure definition
+ * @note HAL I2C State value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : Abort (Abort user request on going)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized and ready to use. HAL I2C Init function called)
+ * b4 (not used)
+ * x : Should be set to 0
+ * b3
+ * 0 : Ready or Busy (No Listen mode ongoing)
+ * 1 : Listen (IP in Address Listen Mode)
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
+ HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
+ process is ongoing */
+ HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
+ process is ongoing */
+ HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+ * @brief HAL Mode structure definition
+ * @note HAL I2C Mode value coding follow below described bitmap :
+ * b7 (not used)
+ * x : Should be set to 0
+ * b6
+ * 0 : None
+ * 1 : Memory (HAL I2C communication is in Memory Mode)
+ * b5
+ * 0 : None
+ * 1 : Slave (HAL I2C communication is in Slave Mode)
+ * b4
+ * 0 : None
+ * 1 : Master (HAL I2C communication is in Master Mode)
+ * b3-b2-b1-b0 (not used)
+ * xxxx : Should be set to 0000
+ */
+typedef enum
+{
+ HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
+ HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
+ HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
+ HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
+
+}HAL_I2C_ModeTypeDef;
+
+/**
+ * @brief I2C handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ __IO uint32_t XferOptions; /*!< I2C transfer options */
+
+ __IO uint32_t PreviousState; /*!< I2C communication Previous state and mode
+ context for internal usage */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code */
+
+ __IO uint32_t Devaddress; /*!< I2C Target device address */
+
+ __IO uint32_t Memaddress; /*!< I2C Target memory address */
+
+ __IO uint32_t MemaddSize; /*!< I2C Target memory address size */
+
+ __IO uint32_t EventCount; /*!< I2C Event counter */
+
+}I2C_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_Error_Code I2C Error Code
+ * @brief I2C Error Code
+ * @{
+ */
+#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001U) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002U) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004U) /*!< AF error */
+#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008U) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout Error */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
+ * @{
+ */
+#define I2C_DUTYCYCLE_2 ((uint32_t)0x00000000U)
+#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY
+/**
+ * @}
+ */
+
+/** @defgroup I2C_addressing_mode I2C addressing mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00004000U)
+#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000U))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000U)
+#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL
+/**
+ * @}
+ */
+
+/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLE ((uint32_t)0x00000000U)
+#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC
+/**
+ * @}
+ */
+
+/** @defgroup I2C_nostretch_mode I2C nostretch mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000U)
+#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001U)
+#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_XferDirection_definition I2C XferDirection definition
+ * @{
+ */
+#define I2C_DIRECTION_RECEIVE ((uint32_t)0x00000000U)
+#define I2C_DIRECTION_TRANSMIT ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_XferOptions_definition I2C XferOptions definition
+ * @{
+ */
+#define I2C_FIRST_FRAME ((uint32_t)0x00000001U)
+#define I2C_NEXT_FRAME ((uint32_t)0x00000002U)
+#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)0x00000004U)
+#define I2C_LAST_FRAME ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @{
+ */
+#define I2C_IT_BUF I2C_CR2_ITBUFEN
+#define I2C_IT_EVT I2C_CR2_ITEVTEN
+#define I2C_IT_ERR I2C_CR2_ITERREN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+#define I2C_FLAG_SMBALERT ((uint32_t)0x00018000U)
+#define I2C_FLAG_TIMEOUT ((uint32_t)0x00014000U)
+#define I2C_FLAG_PECERR ((uint32_t)0x00011000U)
+#define I2C_FLAG_OVR ((uint32_t)0x00010800U)
+#define I2C_FLAG_AF ((uint32_t)0x00010400U)
+#define I2C_FLAG_ARLO ((uint32_t)0x00010200U)
+#define I2C_FLAG_BERR ((uint32_t)0x00010100U)
+#define I2C_FLAG_TXE ((uint32_t)0x00010080U)
+#define I2C_FLAG_RXNE ((uint32_t)0x00010040U)
+#define I2C_FLAG_STOPF ((uint32_t)0x00010010U)
+#define I2C_FLAG_ADD10 ((uint32_t)0x00010008U)
+#define I2C_FLAG_BTF ((uint32_t)0x00010004U)
+#define I2C_FLAG_ADDR ((uint32_t)0x00010002U)
+#define I2C_FLAG_SB ((uint32_t)0x00010001U)
+#define I2C_FLAG_DUALF ((uint32_t)0x00100080U)
+#define I2C_FLAG_SMBHOST ((uint32_t)0x00100040U)
+#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00100020U)
+#define I2C_FLAG_GENCALL ((uint32_t)0x00100010U)
+#define I2C_FLAG_TRA ((uint32_t)0x00100004U)
+#define I2C_FLAG_BUSY ((uint32_t)0x00100002U)
+#define I2C_FLAG_MSL ((uint32_t)0x00100001U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enable or disable the specified I2C interrupts.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2C flag is set or not.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @arg I2C_FLAG_TXE: Data register empty flag
+ * @arg I2C_FLAG_RXNE: Data register not empty flag
+ * @arg I2C_FLAG_STOPF: Stop detection flag
+ * @arg I2C_FLAG_ADD10: 10-bit header sent flag
+ * @arg I2C_FLAG_BTF: Byte transfer finished flag
+ * @arg I2C_FLAG_ADDR: Address sent flag
+ * Address matched flag
+ * @arg I2C_FLAG_SB: Start bit flag
+ * @arg I2C_FLAG_DUALF: Dual flag
+ * @arg I2C_FLAG_SMBHOST: SMBus host header
+ * @arg I2C_FLAG_SMBDEFAULT: SMBus default header
+ * @arg I2C_FLAG_GENCALL: General call header flag
+ * @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+ * @arg I2C_FLAG_BUSY: Bus busy flag
+ * @arg I2C_FLAG_MSL: Master/Slave flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \
+ ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)))
+
+/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
+
+/** @brief Clears the I2C ADDR pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR1; \
+ tmpreg = (__HANDLE__)->Instance->SR2; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clears the I2C STOPF pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR1; \
+ (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Enable the I2C peripheral.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+
+/** @brief Disable the I2C peripheral.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extension module */
+#include "stm32f4xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State, Mode and Errors functions *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+ * @{
+ */
+#define I2C_FLAG_MASK ((uint32_t)0x0000FFFFU)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macros I2C Private Macros
+ * @{
+ */
+
+#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000U)
+#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U))
+#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U)))
+#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3U)) : (((__PCLK__) / ((__SPEED__) * 25U)) | I2C_DUTYCYCLE_16_9))
+#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
+ ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \
+ ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
+
+#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0)))
+#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
+
+#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300U))) >> 7U) | (uint16_t)(0x00F0U))))
+#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300U))) >> 7U) | (uint16_t)(0x00F1U))))
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters
+ * @{
+ */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
+ ((CYCLE) == I2C_DUTYCYCLE_16_9))
+#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+ ((CALL) == I2C_GENERALCALL_ENABLE))
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0) && ((SPEED) <= 400000U))
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (uint32_t)(0xFFFFFC00U)) == 0U)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (uint32_t)(0xFFFFFF01U)) == 0U)
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
+ ((REQUEST) == I2C_NEXT_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,205 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief I2C Extension HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of I2C extension peripheral:
+ * + Extension features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### I2C peripheral extension features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/
+ 429xx/439xx devices contains the following additional features :
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure Noise Filter
+ (#) Configure I2C Analog noise filter using the function HAL_I2C_AnalogFilter_Config()
+ (#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2CEx I2CEx
+ * @brief I2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2CEx_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions
+ * @brief Extension features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures I2C Analog noise filter.
+ * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param AnalogFilter: new state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Reset I2Cx ANOFF bit */
+ hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF);
+
+ /* Disable the analog filter */
+ hi2c->Instance->FLTR |= AnalogFilter;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configures I2C Digital noise filter.
+ * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param DigitalFilter: Coefficient of digital noise filter between 0x00 and 0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+ uint16_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Get the old register value */
+ tmpreg = hi2c->Instance->FLTR;
+
+ /* Reset I2Cx DNF bit [3:0] */
+ tmpreg &= ~(I2C_FLTR_DNF);
+
+ /* Set I2Cx DNF coefficient */
+ tmpreg |= DigitalFilter;
+
+ /* Store the new register value */
+ hi2c->Instance->FLTR = tmpreg;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC ||\
+ STM32F401xE || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,138 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of I2C HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_EX_H
+#define __STM32F4xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2CEx_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2C Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000U)
+#define I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2CEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macros I2C Private Macros
+ * @{
+ */
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC ||\
+ STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1410 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief I2S HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Integrated Interchip Sound (I2S) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The I2S HAL driver can be used as follow:
+
+ (#) Declare a I2S_HandleTypeDef handle structure.
+ (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API:
+ (##) Enable the SPIx interface clock.
+ (##) I2S pins configuration:
+ (+++) Enable the clock for the I2S GPIOs.
+ (+++) Configure these I2S pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT()
+ and HAL_I2S_Receive_IT() APIs).
+ (+++) Configure the I2Sx interrupt priority.
+ (+++) Enable the NVIC I2S IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA()
+ and HAL_I2S_Receive_DMA() APIs:
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+ DMA Tx/Rx Stream.
+
+ (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
+ using HAL_I2S_Init() function.
+
+ -@- The specific I2S interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __I2S_ENABLE_IT() and __I2S_DISABLE_IT() inside the transmit and receive process.
+ -@- Make sure that either:
+ (+@) I2S PLL is configured or
+ (+@) External clock source is configured after setting correctly
+ the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_I2S_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_I2S_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT()
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA()
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
+ (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
+ (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
+
+ *** I2S HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in USART HAL driver.
+
+ (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode)
+ (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode)
+ (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts
+ (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts
+ (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not
+
+ [..]
+ (@) You can refer to the I2S HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2S I2S
+ * @brief I2S HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup I2S_Private_Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Functions I2S Exported Functions
+ * @{
+ */
+
+/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the I2Sx peripheral in simplex mode:
+
+ (+) User must Implement HAL_I2S_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_I2S_Init() to configure the selected device with
+ the selected configuration:
+ (++) Mode
+ (++) Standard
+ (++) Data Format
+ (++) MCLK Output
+ (++) Audio frequency
+ (++) Polarity
+
+ (+) Call the function HAL_I2S_DeInit() to restore the default configuration
+ of the selected I2Sx peripheral.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2S according to the specified parameters
+ * in the I2S_InitTypeDef and create the associated handle.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmpreg = 0U, i2sdiv = 2U, i2sodd = 0U, packetlength = 1U;
+ uint32_t tmp = 0U, i2sclk = 0U;
+
+ /* Check the I2S handle allocation */
+ if(hi2s == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the I2S parameters */
+ assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance));
+ assert_param(IS_I2S_MODE(hi2s->Init.Mode));
+ assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
+ assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
+ assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
+ assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
+ assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
+ assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
+
+ if(hi2s->State == HAL_I2S_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2s->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_I2S_MspInit(hi2s);
+ }
+
+ hi2s->State = HAL_I2S_STATE_BUSY;
+
+ /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+ SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+ SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+ hi2s->Instance->I2SPR = 0x0002U;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = hi2s->Instance->I2SCFGR;
+
+ /* If the default frequency value has to be written, reinitialize i2sdiv and i2sodd */
+ /* If the requested audio frequency is not the default, compute the prescaler */
+ if(hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT)
+ {
+ /* Check the frame length (For the Prescaler computing) *******************/
+ if(hi2s->Init.DataFormat != I2S_DATAFORMAT_16B)
+ {
+ /* Packet length is 32 bits */
+ packetlength = 2U;
+ }
+
+ /* Get I2S source Clock frequency ****************************************/
+ /* If an external I2S clock has to be used, the specific define should be set
+ in the project configuration or in the stm32f4xx_conf.h file */
+ i2sclk = I2S_GetInputClock(hi2s);
+
+ /* Compute the Real divider depending on the MCLK output state, with a floating point */
+ if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
+ {
+ /* MCLK output is enabled */
+ tmp = (uint32_t)(((((i2sclk / 256U) * 10U) / hi2s->Init.AudioFreq)) + 5U);
+ }
+ else
+ {
+ /* MCLK output is disabled */
+ tmp = (uint32_t)(((((i2sclk / (32U * packetlength)) *10U) / hi2s->Init.AudioFreq)) + 5U);
+ }
+
+ /* Remove the flatting point */
+ tmp = tmp / 10U;
+
+ /* Check the parity of the divider */
+ i2sodd = (uint32_t)(tmp & (uint32_t)1U);
+
+ /* Compute the i2sdiv prescaler */
+ i2sdiv = (uint32_t)((tmp - i2sodd) / 2U);
+
+ /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+ i2sodd = (uint32_t) (i2sodd << 8U);
+ }
+
+ /* Test if the divider is 1 or 0 or greater than 0xFF */
+ if((i2sdiv < 2U) || (i2sdiv > 0xFFU))
+ {
+ /* Set the default values */
+ i2sdiv = 2U;
+ i2sodd = 0U;
+ }
+
+ /* Write to SPIx I2SPR register the computed value */
+ hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
+
+ /* Configure the I2S with the I2S_InitStruct values */
+ tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+#if defined(SPI_I2SCFGR_ASTRTEN)
+ if (hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT)
+ {
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg | SPI_I2SCFGR_ASTRTEN;
+ }
+ else
+ {
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg;
+ }
+#else
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg;
+#endif
+
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the I2S peripheral
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s)
+{
+ /* Check the I2S handle allocation */
+ if(hi2s == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hi2s->State = HAL_I2S_STATE_BUSY;
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_I2S_MspDeInit(hi2s);
+
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State = HAL_I2S_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2S MSP Init
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2S MSP DeInit
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_MspDeInit could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2S data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2S_Transmit()
+ (++) HAL_I2S_Receive()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2S_Transmit_IT()
+ (++) HAL_I2S_Receive_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2S_Transmit_DMA()
+ (++) HAL_I2S_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2S_TxCpltCallback()
+ (++) HAL_I2S_RxCpltCallback()
+ (++) HAL_I2S_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit an amount of data in blocking mode
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @param Timeout: Timeout duration
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tmp1 = 0U;
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ while(hi2s->TxXferCount > 0U)
+ {
+ hi2s->Instance->DR = (*pData++);
+ hi2s->TxXferCount--;
+ /* Wait until TXE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Check if Slave mode is selected */
+ if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX))
+ {
+ /* Wait until Busy flag is reset */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, SET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @param Timeout: Timeout duration
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate
+ * in continuous way and as the I2S is not disabled at the end of the I2S transaction.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tmp1 = 0U;
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_RX;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+
+ /* Receive data */
+ while(hi2s->RxXferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ (*pData++) = hi2s->Instance->DR;
+ hi2s->RxXferCount--;
+ }
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ uint32_t tmp1 = 0U;
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ hi2s->pTxBuffPtr = pData;
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronisation
+ * between Master and Slave otherwise the I2S interrupt should be optimized.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ uint32_t tmp1 = 0U;
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ hi2s->pRxBuffPtr = pData;
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with DMA
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to the Transmit data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+ uint32_t tmp1 = 0U;
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pTxBuffPtr = pData;
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Set the I2S Tx DMA Half transfer complete callback */
+ hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
+
+ /* Set the I2S Tx DMA transfer complete callback */
+ hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
+
+ /* Set the DMA error callback */
+ hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
+
+ /* Enable the Tx DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Check if the I2S Tx request is already enabled */
+ if((hi2s->Instance->CR2 & SPI_CR2_TXDMAEN) != SPI_CR2_TXDMAEN)
+ {
+ /* Enable Tx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with DMA
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+ uint32_t tmp1 = 0U;
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pRxBuffPtr = pData;
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Set the I2S Rx DMA Half transfer complete callback */
+ hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
+
+ /* Set the I2S Rx DMA transfer complete callback */
+ hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
+
+ /* Set the DMA error callback */
+ hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
+
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+
+ /* Enable the Rx DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Check if the I2S Rx request is already enabled */
+ if((hi2s->Instance->CR2 &SPI_CR2_RXDMAEN) != SPI_CR2_RXDMAEN)
+ {
+ /* Enable Rx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Disable the I2S DMA Tx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Disable the I2S DMA Rx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+ {
+ /* Disable the I2S DMA Tx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ else
+ {
+ /* Disable the I2S DMA Rx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Enable the I2S DMA Tx request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Enable the I2S DMA Rx request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+ {
+ /* Enable the I2S DMA Tx request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+ else
+ {
+ /* Enable the I2S DMA Rx request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+ }
+
+ /* If the I2S peripheral is still not enabled, enable it */
+ if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0U)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Disable the I2S Tx/Rx DMA requests */
+ hi2s->Instance->CR2 &= ~SPI_CR2_TXDMAEN;
+ hi2s->Instance->CR2 &= ~SPI_CR2_RXDMAEN;
+
+ /* Abort the I2S DMA Stream tx */
+ if(hi2s->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmatx);
+ }
+ /* Abort the I2S DMA Stream rx */
+ if(hi2s->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmarx);
+ }
+
+ /* Disable I2S peripheral */
+ __HAL_I2S_DISABLE(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2S interrupt request.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+__weak void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+ /* I2S in mode Receiver ------------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ I2S_Receive_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Overrun error interrupt occurred ---------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+ }
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+ /* I2S in mode Transmitter -----------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ I2S_Transmit_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Underrun error interrupt occurred --------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+ }
+ }
+
+ /* Call the Error call Back in case of Errors */
+ if(hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
+ {
+ /* Set the I2S state ready to be able to start again the process */
+ hi2s->State= HAL_I2S_STATE_READY;
+ HAL_I2S_ErrorCallback(hi2s);
+ }
+}
+
+/**
+ * @brief Tx Transfer Half completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer half completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2S error callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral State functions
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the I2S state
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL state
+ */
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s)
+{
+ return hi2s->State;
+}
+
+/**
+ * @brief Return the I2S error code
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval I2S Error Code
+ */
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s)
+{
+ return hi2s->ErrorCode;
+}
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA I2S transmit process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+ void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_I2S_TxHalfCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_I2S_RxHalfCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S communication error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void I2S_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ hi2s->TxXferCount = 0U;
+ hi2s->RxXferCount = 0U;
+
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ hi2s->ErrorCode |= HAL_I2S_ERROR_DMA;
+ HAL_I2S_ErrorCallback(hi2s);
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s)
+{
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Transmit data */
+ hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+
+ hi2s->TxXferCount--;
+
+ if(hi2s->TxXferCount == 0U)
+ {
+ /* Disable TXE and ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ HAL_I2S_TxCpltCallback(hi2s);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ }
+
+ return HAL_OK;
+ }
+
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s)
+{
+ if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Receive data */
+ (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+
+ hi2s->RxXferCount--;
+
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+
+ if(hi2s->RxXferCount == 0U)
+ {
+ /* Disable RXNE and ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE | I2S_IT_ERR);
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ HAL_I2S_RxCpltCallback(hi2s);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles I2S Communication Timeout.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param Flag: Flag checked
+ * @param Status: Value of the flag expected
+ * @param Timeout: Duration of the timeout
+ * @retval HAL status
+ */
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_I2S_GET_FLAG(hi2s, Flag) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Set the I2S State ready */
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_I2S_GET_FLAG(hi2s, Flag) != RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Set the I2S State ready */
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2S_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,494 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_H
+#define __STM32F4xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+
+ uint32_t ClockSource; /*!< Specifies the I2S Clock Source.
+ This parameter can be a value of @ref I2S_Clock_Source */
+
+ uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode.
+ This parameter can be a value of @ref I2S_FullDuplex_Mode */
+
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x03U, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x04U /*!< I2S error state */
+
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /* I2S registers base address */
+
+ I2S_InitTypeDef Init; /* I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* I2S Rx transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+
+ __IO uint32_t ErrorCode; /* I2S Error code */
+
+}I2S_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+ * @{
+ */
+
+/** @defgroup I2S_Error_Code I2S Error Code
+ * @brief I2S Error Code
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000001U) /*!< I2S Underrun error */
+#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002U) /*!< I2S Overrun error */
+#define HAL_I2SEX_ERROR_UDR ((uint32_t)0x00000004U) /*!< I2S extended Underrun error */
+#define HAL_I2SEX_ERROR_OVR ((uint32_t)0x00000008U) /*!< I2S extended Overrun error */
+#define HAL_I2S_ERROR_FRE ((uint32_t)0x00000010U) /*!< I2S Frame format error */
+#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000020U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode I2S Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000U)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100U)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200U)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard I2S Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000U)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010U)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020U)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030U)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000U)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001U)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003U)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output I2S Mclk Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000U)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000U)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000U)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100U)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000U)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050U)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000U)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025U)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000U)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_FullDuplex_Mode I2S FullDuplex Mode
+ * @{
+ */
+#define I2S_FULLDUPLEXMODE_DISABLE ((uint32_t)0x00000000U)
+#define I2S_FULLDUPLEXMODE_ENABLE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000U)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flags_Definition I2S Flags Definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Macros I2S Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+/**
+ * @}
+ */
+
+/* Include I2S Extension module */
+#include "stm32f4xx_hal_i2s_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Peripheral Control and State functions **************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Constants I2S Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_Private_Macros I2S Private Macros
+ * @{
+ */
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX) || \
+ ((MODE) == I2S_MODE_MASTER_RX))
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+
+#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
+ ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Functions I2S Private Functions
+ * @{
+ */
+void I2S_DMATxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMAError(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout);
+HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1478 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief I2S HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of I2S extension peripheral:
+ * + Extension features Functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### I2S Extension features #####
+ ==============================================================================
+ [..]
+ (#) In I2S full duplex mode, each SPI peripheral is able to manage sending and receiving
+ data simultaneously using two data lines. Each SPI peripheral has an extended block
+ called I2Sxext (i.e I2S2ext for SPI2 and I2S3ext for SPI3).
+ (#) The extension block is not a full SPI IP, it is used only as I2S slave to
+ implement full duplex mode. The extension block uses the same clock sources
+ as its master.
+
+ (#) Both I2Sx and I2Sx_ext can be configured as transmitters or receivers.
+
+ [..]
+ (@) Only I2Sx can deliver SCK and WS to I2Sx_ext in full duplex mode, where
+ I2Sx can be I2S2 or I2S3.
+
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send and receive in the same time an amount of data in blocking mode using HAL_I2S_TransmitReceive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send and receive in the same time an amount of data in non blocking mode using HAL_I2S_TransmitReceive_IT()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send and receive an amount of data in non blocking mode (DMA) using HAL_I2S_TransmitReceive_DMA()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
+ (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
+ (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2SEx I2SEx
+ * @brief I2S HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup I2SEx_Private_Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Functions I2S Exported Functions
+ * @{
+ */
+
+/** @defgroup I2SEx_Group1 Extension features functions
+ * @brief Extension features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension features Functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2S data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2S_TransmitReceive()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2S_TransmitReceive_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2S_TransmitReceive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2S_TxCpltCallback()
+ (++) HAL_I2S_RxCpltCallback()
+ (++) HAL_I2S_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/**
+ * @brief Initializes the I2S according to the specified parameters
+ * in the I2S_InitTypeDef and create the associated handle.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmpreg = 0U, i2sdiv = 2U, i2sodd = 0U, packetlength = 1U;
+ uint32_t tmp = 0U, i2sclk = 0U;
+
+ /* Check the I2S handle allocation */
+ if(hi2s == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the I2S parameters */
+ assert_param(IS_I2S_MODE(hi2s->Init.Mode));
+ assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
+ assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
+ assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
+ assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
+ assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
+ assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
+
+ if(hi2s->State == HAL_I2S_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2s->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX */
+ HAL_I2S_MspInit(hi2s);
+ }
+
+ hi2s->State = HAL_I2S_STATE_BUSY;
+
+ /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+ SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+ SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+ hi2s->Instance->I2SPR = 0x0002U;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = hi2s->Instance->I2SCFGR;
+
+ /* If the default frequency value has to be written, reinitialize i2sdiv and i2sodd */
+ /* If the requested audio frequency is not the default, compute the prescaler */
+ if(hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT)
+ {
+ /* Check the frame length (For the Prescaler computing) *******************/
+ if(hi2s->Init.DataFormat != I2S_DATAFORMAT_16B)
+ {
+ /* Packet length is 32 bits */
+ packetlength = 2U;
+ }
+
+ /* Get I2S source Clock frequency ****************************************/
+ i2sclk = I2S_GetInputClock(hi2s);
+
+ /* Compute the Real divider depending on the MCLK output state, with a floating point */
+ if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
+ {
+ /* MCLK output is enabled */
+ tmp = (uint32_t)(((((i2sclk / 256U) * 10U) / hi2s->Init.AudioFreq)) + 5U);
+ }
+ else
+ {
+ /* MCLK output is disabled */
+ tmp = (uint32_t)(((((i2sclk / (32U * packetlength)) * 10U) / hi2s->Init.AudioFreq)) + 5U);
+ }
+
+ /* Remove the flatting point */
+ tmp = tmp / 10U;
+
+ /* Check the parity of the divider */
+ i2sodd = (uint32_t)(tmp & (uint32_t)1U);
+
+ /* Compute the i2sdiv prescaler */
+ i2sdiv = (uint32_t)((tmp - i2sodd) / 2U);
+
+ /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+ i2sodd = (uint32_t) (i2sodd << 8U);
+ }
+
+ /* Test if the divider is 1 or 0 or greater than 0xFF */
+ if((i2sdiv < 2U) || (i2sdiv > 0xFFU))
+ {
+ /* Set the default values */
+ i2sdiv = 2U;
+ i2sodd = 0U;
+ }
+
+ /* Write to SPIx I2SPR register the computed value */
+ hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
+
+ /* Configure the I2S with the I2S_InitStruct values */
+ tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+#if defined(SPI_I2SCFGR_ASTRTEN)
+ if (hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT)
+ {
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg | SPI_I2SCFGR_ASTRTEN;
+ }
+ else
+ {
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg;
+ }
+#else
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg;
+#endif
+
+ /* Configure the I2S extended if the full duplex mode is enabled */
+ assert_param(IS_I2S_FULLDUPLEX_MODE(hi2s->Init.FullDuplexMode));
+ if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ I2SxEXT(hi2s->Instance)->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+ SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+ SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+ I2SxEXT(hi2s->Instance)->I2SPR = 2U;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = I2SxEXT(hi2s->Instance)->I2SCFGR;
+
+ /* Get the mode to be configured for the extended I2S */
+ if((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX))
+ {
+ tmp = I2S_MODE_SLAVE_RX;
+ }
+ else
+ {
+ if((hi2s->Init.Mode == I2S_MODE_MASTER_RX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_RX))
+ {
+ tmp = I2S_MODE_SLAVE_TX;
+ }
+ }
+
+ /* Configure the I2S Slave with the I2S Master parameter values */
+ tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | tmp | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+ /* Write to SPIx I2SCFGR */
+ I2SxEXT(hi2s->Instance)->I2SCFGR = tmpreg;
+ }
+
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Full-Duplex Transmit/Receive data in blocking mode.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pTxData: a 16-bit pointer to the Transmit data buffer.
+ * @param pRxData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @param Timeout: Timeout duration
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmp1 = 0U;
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the I2S State */
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
+ is selected during the I2S configuration phase, the Size parameter means the number
+ of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
+ frame is selected the Size parameter means the number of 16-bit data length. */
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Set the I2S State busy TX/RX */
+ hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
+
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ /* Check if the I2S is already enabled: The I2S is kept enabled at the end of transaction
+ to avoid the clock de-synchronization between Master and Slave. */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+
+ /* Enable I2Sx peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ while(hi2s->TxXferCount > 0U)
+ {
+ /* Wait until TXE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ hi2s->Instance->DR = (*pTxData++);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until RXNE flag is set */
+ while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) != SPI_SR_RXNE)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ (*pRxData++) = I2SxEXT(hi2s->Instance)->DR;
+
+ hi2s->TxXferCount--;
+ hi2s->RxXferCount--;
+ }
+ }
+ /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+ else
+ {
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral before the I2Sext*/
+ __HAL_I2S_ENABLE(hi2s);
+
+ /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+ }
+ else
+ {
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+ }
+ while(hi2s->TxXferCount > 0U)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until TXE flag is set */
+ while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) != SPI_SR_TXE)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ I2SxEXT(hi2s->Instance)->DR = (*pTxData++);
+
+ /* Wait until RXNE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ (*pRxData++) = hi2s->Instance->DR;
+
+ hi2s->TxXferCount--;
+ hi2s->RxXferCount--;
+ }
+ }
+
+ /* Set the I2S State ready */
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pTxData: a 16-bit pointer to the Transmit data buffer.
+ * @param pRxData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size)
+{
+ uint32_t tmp1 = 0U;
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ hi2s->pTxBuffPtr = pTxData;
+ hi2s->pRxBuffPtr = pRxData;
+
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
+ is selected during the I2S configuration phase, the Size parameter means the number
+ of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
+ frame is selected the Size parameter means the number of 16-bit data length. */
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ /* Enable I2Sext RXNE and ERR interrupts */
+ I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_RXNE | I2S_IT_ERR);
+
+ /* Enable I2Sx TXE and ERR interrupts */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+
+ /* Enable I2Sx peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+ }
+ /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+ else
+ {
+ /* Enable I2Sext TXE and ERR interrupts */
+ I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_TXE |I2S_IT_ERR);
+
+ /* Enable I2Sext RXNE and ERR interrupts */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Check if the I2S_MODE_MASTER_RX is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Prepare the First Data before enabling the I2S */
+ if(hi2s->TxXferCount != 0U)
+ {
+ /* Transmit First data */
+ I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
+ hi2s->TxXferCount--;
+
+ if(hi2s->TxXferCount == 0U)
+ {
+ /* Disable I2Sext TXE interrupt */
+ I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE;
+ }
+ }
+ }
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+
+ /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+ }
+ }
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Transmit/Receive data in non-blocking mode using DMA
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pTxData: a 16-bit pointer to the Transmit data buffer.
+ * @param pRxData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size)
+{
+ uint32_t *tmp;
+ uint32_t tmp1 = 0U;
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pTxBuffPtr = pTxData;
+ hi2s->pRxBuffPtr = pRxData;
+
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
+ is selected during the I2S configuration phase, the Size parameter means the number
+ of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
+ frame is selected the Size parameter means the number of 16-bit data length. */
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Set the I2S Rx DMA Half transfer complete callback */
+ hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
+
+ /* Set the I2S Rx DMA transfer complete callback */
+ hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
+
+ /* Set the I2S Rx DMA error callback */
+ hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
+
+ /* Set the I2S Tx DMA Half transfer complete callback */
+ hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
+
+ /* Set the I2S Tx DMA transfer complete callback */
+ hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
+
+ /* Set the I2S Tx DMA error callback */
+ hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
+
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ /* Enable the Rx DMA Stream */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+ /* Enable Rx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_RXDMAEN;
+
+ /* Enable the Tx DMA Stream */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
+
+ /* Enable Tx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+
+ /* Enable I2S peripheral after the I2Sext */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+ }
+ else
+ {
+ /* Enable the Tx DMA Stream */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, hi2s->TxXferSize);
+
+ /* Enable Tx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_TXDMAEN;
+
+ /* Enable the Rx DMA Stream */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+ /* Enable Rx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral before the I2Sext */
+ __HAL_I2S_ENABLE(hi2s);
+
+ /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+ }
+ else
+ {
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Disable the I2S DMA Tx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Disable the I2S DMA Rx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+ {
+ /* Disable the I2S DMA Tx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ /* Disable the I2SEx Rx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ else
+ {
+ /* Disable the I2S DMA Rx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ /* Disable the I2SEx Tx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Enable the I2S DMA Tx request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Enable the I2S DMA Rx request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+ {
+ /* Enable the I2S DMA Tx request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ /* Disable the I2SEx Rx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_RXDMAEN;
+ }
+ else
+ {
+ /* Enable the I2S DMA Rx request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ /* Enable the I2SEx Tx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_TXDMAEN;
+ }
+ }
+
+ /* If the I2S peripheral is still not enabled, enable it */
+ if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0U)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Disable the I2S Tx/Rx DMA requests */
+ hi2s->Instance->CR2 &= ~SPI_CR2_TXDMAEN;
+ hi2s->Instance->CR2 &= ~SPI_CR2_RXDMAEN;
+
+ if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ /* Disable the I2S extended Tx/Rx DMA requests */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+
+ /* Abort the I2S DMA Stream tx */
+ if(hi2s->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmatx);
+ }
+ /* Abort the I2S DMA Stream rx */
+ if(hi2s->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmarx);
+ }
+
+ /* Disable I2S peripheral */
+ __HAL_I2S_DISABLE(hi2s);
+
+ if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ /* Disable the I2Sext peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE;
+ }
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2S interrupt request.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+ __IO uint32_t tmpreg1 = 0U;
+ if(hi2s->Init.FullDuplexMode != I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+ /* I2S in mode Receiver ------------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ I2S_Receive_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Overrun error interrupt occurred ---------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+ }
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+ /* I2S in mode Tramitter -----------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ I2S_Transmit_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Underrun error interrupt occurred --------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+ }
+ }
+ }
+ else
+ {
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE;
+ tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_RXNE;
+ /* I2Sext in mode Receiver ---------------------------------------------*/
+ if((tmp1 == SPI_SR_RXNE) && (tmp2 == I2S_IT_RXNE))
+ {
+ /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
+ the I2Sext RXNE interrupt will be generated to manage the full-duplex receive phase. */
+ I2SEx_TransmitReceive_IT(hi2s);
+ }
+
+ tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_OVR;
+ tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_ERR;
+ /* I2Sext Overrun error interrupt occurred -----------------------------*/
+ if((tmp1 == SPI_SR_OVR) && (tmp2 == I2S_IT_ERR))
+ {
+ /* Clear I2Sext OVR Flag */
+ tmpreg1 = I2SxEXT(hi2s->Instance)->DR;
+ tmpreg1 = I2SxEXT(hi2s->Instance)->SR;
+ hi2s->ErrorCode |= HAL_I2SEX_ERROR_OVR;
+ UNUSED(tmpreg1);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+ /* I2S in mode Tramitter -----------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
+ the I2S TXE interrupt will be generated to manage the full-duplex transmit phase. */
+ I2SEx_TransmitReceive_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Underrun error interrupt occurred -------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+ }
+ }
+ /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+ else
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+ /* I2S in mode Receiver ------------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
+ the I2S RXNE interrupt will be generated to manage the full-duplex receive phase. */
+ I2SEx_TransmitReceive_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Overrun error interrupt occurred --------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+ }
+
+ tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE;
+ tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_TXE;
+ /* I2Sext in mode Tramitter --------------------------------------------*/
+ if((tmp1 == SPI_SR_TXE) && (tmp2 == I2S_IT_TXE))
+ {
+ /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
+ the I2Sext TXE interrupt will be generated to manage the full-duplex transmit phase. */
+ I2SEx_TransmitReceive_IT(hi2s);
+ }
+
+ tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_UDR;
+ tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_ERR;
+ /* I2Sext Underrun error interrupt occurred ----------------------------*/
+ if((tmp1 == SPI_SR_UDR) && (tmp2 == I2S_IT_ERR))
+ {
+ /* Clear I2Sext UDR Flag */
+ tmpreg1 = I2SxEXT(hi2s->Instance)->SR;
+ hi2s->ErrorCode |= HAL_I2SEX_ERROR_UDR;
+ UNUSED(tmpreg1);
+ }
+ }
+ }
+
+ /* Call the Error call Back in case of Errors */
+ if(hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
+ {
+ /* Set the I2S state ready to be able to start again the process */
+ hi2s->State= HAL_I2S_STATE_READY;
+ HAL_I2S_ErrorCallback(hi2s);
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ if(hi2s->TxXferCount != 0U)
+ {
+ if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE) != RESET)
+ {
+ /* Transmit data */
+ hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+ hi2s->TxXferCount--;
+
+ if(hi2s->TxXferCount == 0U)
+ {
+ /* Disable TXE interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_TXE);
+ }
+ }
+ }
+
+ if(hi2s->RxXferCount != 0U)
+ {
+ if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) == SPI_SR_RXNE)
+ {
+ /* Receive data */
+ (*hi2s->pRxBuffPtr++) = I2SxEXT(hi2s->Instance)->DR;
+ hi2s->RxXferCount--;
+
+ if(hi2s->RxXferCount == 0U)
+ {
+ /* Disable I2Sext RXNE interrupt */
+ I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_RXNE;
+ }
+ }
+ }
+ }
+ /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+ else
+ {
+ if(hi2s->TxXferCount != 0U)
+ {
+ if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) == SPI_SR_TXE)
+ {
+ /* Transmit data */
+ I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
+ hi2s->TxXferCount--;
+
+ if(hi2s->TxXferCount == 0U)
+ {
+ /* Disable I2Sext TXE interrupt */
+ I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE;
+
+ HAL_I2S_TxCpltCallback(hi2s);
+ }
+ }
+ }
+ if(hi2s->RxXferCount != 0U)
+ {
+ if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE) != RESET)
+ {
+ /* Receive data */
+ (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+ hi2s->RxXferCount--;
+
+ if(hi2s->RxXferCount == 0U)
+ {
+ /* Disable RXNE interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE);
+
+ HAL_I2S_RxCpltCallback(hi2s);
+ }
+ }
+ }
+ }
+
+ tmp1 = hi2s->RxXferCount;
+ tmp2 = hi2s->TxXferCount;
+ if((tmp1 == 0U) && (tmp2 == 0U))
+ {
+ /* Disable I2Sx ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_ERR);
+ /* Disable I2Sext ERR interrupt */
+ I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_ERR;
+
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F401xx ||\
+ STM32F411xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || \
+ STM32F412Rx || STM32F412Cx */
+/**
+ * @brief DMA I2S transmit process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void I2S_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ if(hi2s->Init.FullDuplexMode != I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+
+ /* FullDuplexMode feature enabled */
+ else
+ {
+ if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX))
+ {
+ /* Disable Tx DMA Request for the I2S Master*/
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ else
+ {
+ /* Disable Tx DMA Request for the I2SEx Slave */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ }
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F401xx || STM32F411xx ||\
+ STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+ hi2s->TxXferCount = 0U;
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if(hi2s->RxXferCount == 0U)
+ {
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ }
+ else
+ {
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ }
+ HAL_I2S_TxCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S receive process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void I2S_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ if(hi2s->Init.FullDuplexMode != I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+ /* FullDuplexMode feature enabled */
+ else
+ {
+ if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX))
+ {
+ /* Disable Rx DMA Request for the I2SEx Slave */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ else
+ {
+ /* Disable Rx DMA Request for the I2S Master*/
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ }
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F401xx || STM32F411xx ||\
+ STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+ hi2s->RxXferCount = 0U;
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if(hi2s->TxXferCount == 0U)
+ {
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ }
+ else
+ {
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ }
+ HAL_I2S_RxCpltCallback(hi2s);
+}
+
+/**
+ * @brief Get I2S clock Input based on Source clock selection in RCC
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval I2S Clock Input
+ */
+uint32_t I2S_GetInputClock(I2S_HandleTypeDef *hi2s)
+{
+ /* This variable used to store the VCO Input (value in Hz) */
+ uint32_t vcoinput = 0U;
+ /* This variable used to store the VCO Output (value in Hz) */
+ uint32_t vcooutput = 0U;
+ /* This variable used to store the I2S_CK_x (value in Hz) */
+ uint32_t i2ssourceclock = 0U;
+
+ /* Configure 12S Clock based on I2S source clock selection */
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+ switch(hi2s->Init.ClockSource)
+ {
+ case I2S_CLOCK_EXTERNAL :
+ {
+ /* Set the I2S clock to the external clock value */
+ i2ssourceclock = EXTERNAL_CLOCK_VALUE;
+ break;
+ }
+#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+ case I2S_CLOCK_PLL :
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U)));
+ /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+ i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U)));
+ break;
+ }
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+ case I2S_CLOCK_PLLR :
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLL_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+
+ /* PLL_VCO Output = PLL_VCO Input * PLLN */
+ vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U)));
+ /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+ i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U)));
+ break;
+ }
+ case I2S_CLOCK_PLLSRC :
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLL_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ i2ssourceclock = (uint32_t)(HSE_VALUE);
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ i2ssourceclock = (uint32_t)(HSI_VALUE);
+ }
+ break;
+ }
+ default :
+ {
+ break;
+ }
+ }
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F469xx) || defined(STM32F479xx)
+
+ /* If an external I2S clock has to be used, the specific define should be set
+ in the project configuration or in the stm32f4xx_conf.h file */
+ if(hi2s->Init.ClockSource == I2S_CLOCK_EXTERNAL)
+ {
+ /* Set the I2S clock to the external clock value */
+ i2ssourceclock = EXTERNAL_CLOCK_VALUE;
+ }
+ else
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U)));
+ /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+ i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U)));
+ }
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F411xE)
+
+ /* If an external I2S clock has to be used, the specific define should be set
+ in the project configuration or in the stm32f4xx_conf.h file */
+ if(hi2s->Init.ClockSource == I2S_CLOCK_EXTERNAL)
+ {
+ /* Set the I2S clock to the external clock value */
+ i2ssourceclock = EXTERNAL_CLOCK_VALUE;
+ }
+ else
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U)));
+ /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+ i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U)));
+ }
+#endif /* STM32F411xE */
+
+ /* the return result is the value of I2S clock */
+ return i2ssourceclock;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2S_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,211 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_EX_H
+#define __STM32F4xx_HAL_I2S_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2SEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Types I2S Exported Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Constants I2S Exported Constants
+ * @{
+ */
+
+/** @defgroup I2S_Clock_Source I2S Clock Source
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \
+ defined(STM32F479xx)
+#define I2S_CLOCK_PLL ((uint32_t)0x00000000U)
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001U)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define I2S_CLOCK_PLL ((uint32_t)0x00000000U)
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001U)
+#define I2S_CLOCK_PLLR ((uint32_t)0x00000002U)
+#define I2S_CLOCK_PLLSRC ((uint32_t)0x00000003U)
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define I2S_CLOCK_PLLSRC ((uint32_t)0x00000000U)
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001U)
+#define I2S_CLOCK_PLLR ((uint32_t)0x00000002U)
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Macros I2S Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2SEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2SEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Extended features functions **************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Constants I2S Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Macros I2S Private Macros
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \
+ defined(STM32F479xx)
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\
+ ((CLOCK) == I2S_CLOCK_PLL))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\
+ ((CLOCK) == I2S_CLOCK_PLL) ||\
+ ((CLOCK) == I2S_CLOCK_PLLSRC) ||\
+ ((CLOCK) == I2S_CLOCK_PLLR))
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\
+ ((CLOCK) == I2S_CLOCK_PLLSRC) ||\
+ ((CLOCK) == I2S_CLOCK_PLLR))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Cx) || defined(STM32F410Rx) || \
+ defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || \
+ defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F410Cx || STM32F410Rx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx ||
+ STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Functions I2S Private Functions
+ * @{
+ */
+HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s);
+uint32_t I2S_GetInputClock(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1531 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_irda.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief IRDA HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the IrDA SIR ENDEC block (IrDA):
+ * + Initialization and de-initialization methods
+ * + IO operation methods
+ * + Peripheral Control methods
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The IRDA HAL driver can be used as follows:
+
+ (#) Declare a IRDA_HandleTypeDef handle structure.
+ (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API:
+ (##) Enable the USARTx interface clock.
+ (##) IRDA pins configuration:
+ (+++) Enable the clock for the IRDA GPIOs.
+ (+++) Configure these IRDA pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT()
+ and HAL_IRDA_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA()
+ and HAL_IRDA_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+ (#) Program the Baud Rate, Word Length, Parity, IrDA Mode, Prescaler
+ and Mode(Receiver/Transmitter) in the hirda Init structure.
+
+ (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API:
+ (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customized HAL_IRDA_MspInit() API.
+ -@@- The specific IRDA interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_IRDA_Transmit_IT()
+ (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_IRDA_Receive_IT()
+ (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
+ (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_ErrorCallback
+
+ *** DMA mode IO operation ***
+ =============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_IRDA_Transmit_DMA()
+ (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_IRDA_Receive_DMA()
+ (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
+ (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_ErrorCallback
+
+ *** IRDA HAL driver macros list ***
+ ===================================
+ [..]
+ Below the list of most used macros in IRDA HAL driver.
+
+ (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral
+ (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral
+ (+) __HAL_IRDA_GET_FLAG : Checks whether the specified IRDA flag is set or not
+ (+) __HAL_IRDA_CLEAR_FLAG : Clears the specified IRDA pending flag
+ (+) __HAL_IRDA_ENABLE_IT: Enables the specified IRDA interrupt
+ (+) __HAL_IRDA_DISABLE_IT: Disables the specified IRDA interrupt
+
+ (@) You can refer to the IRDA HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup IRDA IRDA
+ * @brief HAL IRDA module driver
+ * @{
+ */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup IRDA_Private_Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup IRDA_Private_Functions
+ * @{
+ */
+static void IRDA_SetConfig (IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda);
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Tickstart,uint32_t Timeout);
+static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda);
+static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Functions IrDA Exported Functions
+ * @{
+ */
+
+/** @defgroup IRDA_Exported_Functions_Group1 IrDA Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+ in IrDA mode.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) BaudRate
+ (++) WordLength
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ please refer to Reference manual for possible IRDA frame formats.
+ (++) Prescaler: A pulse of width less than two and greater than one PSC period(s) may or may
+ not be rejected. The receiver set up time should be managed by software. The IrDA physical layer
+ specification specifies a minimum of 10 ms delay between transmission and
+ reception (IrDA is a half duplex protocol).
+ (++) Mode: Receiver/transmitter modes
+ (++) IrDAMode: the IrDA can operate in the Normal mode or in the Low power mode.
+ [..]
+ The HAL_IRDA_Init() API follows IRDA configuration procedures (details for the procedures
+ are available in reference manual).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the IRDA mode according to the specified
+ * parameters in the IRDA_InitTypeDef and create the associated handle.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda)
+{
+ /* Check the IRDA handle allocation */
+ if(hirda == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the IRDA instance parameters */
+ assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+ /* Check the IRDA mode parameter in the IRDA handle */
+ assert_param(IS_IRDA_POWERMODE(hirda->Init.IrDAMode));
+
+ if(hirda->gState == HAL_IRDA_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hirda->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_IRDA_MspInit(hirda);
+ }
+
+ hirda->gState = HAL_IRDA_STATE_BUSY;
+
+ /* Disable the IRDA peripheral */
+ __HAL_IRDA_DISABLE(hirda);
+
+ /* Set the IRDA communication parameters */
+ IRDA_SetConfig(hirda);
+
+ /* In IrDA mode, the following bits must be kept cleared:
+ - LINEN, STOP and CLKEN bits in the USART_CR2 register,
+ - SCEN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR2_LINEN | USART_CR2_STOP | USART_CR2_CLKEN);
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_SCEN | USART_CR3_HDSEL);
+
+ /* Enable the IRDA peripheral */
+ __HAL_IRDA_ENABLE(hirda);
+
+ /* Set the prescaler */
+ MODIFY_REG(hirda->Instance->GTPR, USART_GTPR_PSC, hirda->Init.Prescaler);
+
+ /* Configure the IrDA mode */
+ MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.IrDAMode);
+
+ /* Enable the IrDA mode by setting the IREN bit in the CR3 register */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_IREN);
+
+ /* Initialize the IRDA state*/
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->gState= HAL_IRDA_STATE_READY;
+ hirda->RxState= HAL_IRDA_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the IRDA peripheral
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda)
+{
+ /* Check the IRDA handle allocation */
+ if(hirda == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+
+ hirda->gState = HAL_IRDA_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_IRDA_DISABLE(hirda);
+
+ /* DeInit the low level hardware */
+ HAL_IRDA_MspDeInit(hirda);
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+ hirda->gState = HAL_IRDA_STATE_RESET;
+ hirda->RxState = HAL_IRDA_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief IRDA MSP Init.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief IRDA MSP DeInit.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions
+ * @brief IRDA Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the IRDA data transfers.
+ [..]
+ IrDA is a half duplex communication protocol. If the Transmitter is busy, any data
+ on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver
+ is busy, data on the TX from the USART to IrDA will not be encoded by IrDA.
+ While receiving data, transmission should be avoided as the data to be transmitted
+ could be corrupted.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks
+ will be executed respectively at the end of the transmit or Receive process
+ The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected
+
+ (#) Blocking mode API's are :
+ (++) HAL_IRDA_Transmit()
+ (++) HAL_IRDA_Receive()
+
+ (#) Non Blocking mode APIs with Interrupt are :
+ (++) HAL_IRDA_Transmit_IT()
+ (++) HAL_IRDA_Receive_IT()
+ (++) HAL_IRDA_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_IRDA_Transmit_DMA()
+ (++) HAL_IRDA_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_IRDA_TxCpltCallback()
+ (++) HAL_IRDA_RxCpltCallback()
+ (++) HAL_IRDA_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sends an amount of data in blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Specify timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0;
+
+ /* Check that a Tx process is not already ongoing */
+ if(hirda->gState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->gState = HAL_IRDA_STATE_BUSY_TX;
+
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ hirda->TxXferSize = Size;
+ hirda->TxXferCount = Size;
+ while(hirda->TxXferCount > 0U)
+ {
+ hirda->TxXferCount--;
+ if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+ {
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ hirda->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ pData +=2U;
+ }
+ else
+ {
+ pData +=1U;
+ }
+ }
+ else
+ {
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ hirda->Instance->DR = (*pData++ & (uint8_t)0xFFU);
+ }
+ }
+
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* At end of Tx process, restore hirda->gState to Ready */
+ hirda->gState = HAL_IRDA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Specify timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0;
+
+ /* Check that a Rx process is not already ongoing */
+ if(hirda->RxState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ hirda->RxXferSize = Size;
+ hirda->RxXferCount = Size;
+ /* Check the remain data to be received */
+ while(hirda->RxXferCount > 0U)
+ {
+ hirda->RxXferCount--;
+ if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+ {
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData ;
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x01FFU);
+ pData +=2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x00FFU);
+ pData +=1U;
+ }
+ }
+ else
+ {
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ *pData++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *pData++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x007FU);
+ }
+ }
+ }
+
+ /* At end of Rx process, restore hirda->RxState to Ready */
+ hirda->RxState = HAL_IRDA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Tx process is not already ongoing */
+ if(hirda->gState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pTxBuffPtr = pData;
+ hirda->TxXferSize = Size;
+ hirda->TxXferCount = Size;
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->gState = HAL_IRDA_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the IRDA Transmit Data Register Empty Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Rx process is not already ongoing */
+ if(hirda->RxState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pRxBuffPtr = pData;
+ hirda->RxXferSize = Size;
+ hirda->RxXferCount = Size;
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the IRDA Data Register not empty Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Enable the IRDA Parity Error Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Tx process is not already ongoing */
+ if(hirda->gState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pTxBuffPtr = pData;
+ hirda->TxXferSize = Size;
+ hirda->TxXferCount = Size;
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->gState = HAL_IRDA_STATE_BUSY_TX;
+
+ /* Set the IRDA DMA transfer complete callback */
+ hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt;
+
+ /* Set the IRDA DMA half transfer complete callback */
+ hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt;
+
+ /* Set the DMA error callback */
+ hirda->hdmatx->XferErrorCallback = IRDA_DMAError;
+
+ /* Set the DMA abort callback */
+ hirda->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the IRDA transmit DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hirda->hdmatx, *(uint32_t*)tmp, (uint32_t)&hirda->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_FLAG_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @note When the IRDA parity is enabled (PCE = 1) the data received contain the parity bit.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Rx process is not already ongoing */
+ if(hirda->RxState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pRxBuffPtr = pData;
+ hirda->RxXferSize = Size;
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
+
+ /* Set the IRDA DMA transfer complete callback */
+ hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt;
+
+ /* Set the IRDA DMA half transfer complete callback */
+ hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt;
+
+ /* Set the DMA error callback */
+ hirda->hdmarx->XferErrorCallback = IRDA_DMAError;
+
+ /* Set the DMA abort callback */
+ hirda->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the IRDA Parity Error Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the DMA Transfer.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda)
+{
+ uint32_t dmarequest = 0x00U;
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT);
+ if((hirda->gState == HAL_IRDA_STATE_BUSY_TX) && dmarequest)
+ {
+ /* Disable the IRDA DMA Tx request */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+ }
+
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR);
+ if((hirda->RxState == HAL_IRDA_STATE_BUSY_RX) && dmarequest)
+ {
+ /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the IRDA DMA Rx request */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the DMA Transfer.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda)
+{
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ if(hirda->gState == HAL_IRDA_STATE_BUSY_TX)
+ {
+ /* Enable the IRDA DMA Tx request */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+ }
+ if(hirda->RxState == HAL_IRDA_STATE_BUSY_RX)
+ {
+ /* Clear the Overrun flag before resuming the Rx transfer */
+ __HAL_IRDA_CLEAR_OREFLAG(hirda);
+
+ /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+ SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the IRDA DMA Rx request */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the DMA Transfer.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda)
+{
+ uint32_t dmarequest = 0x00U;
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback()
+ */
+
+ /* Stop IRDA DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT);
+ if((hirda->gState == HAL_IRDA_STATE_BUSY_TX) && dmarequest)
+ {
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+ /* Abort the IRDA DMA Tx channel */
+ if(hirda->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hirda->hdmatx);
+ }
+ IRDA_EndTxTransfer(hirda);
+ }
+
+ /* Stop IRDA DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR);
+ if((hirda->RxState == HAL_IRDA_STATE_BUSY_RX) && dmarequest)
+ {
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the IRDA DMA Rx channel */
+ if(hirda->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hirda->hdmarx);
+ }
+ IRDA_EndRxTransfer(hirda);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles IRDA interrupt request.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
+{
+ uint32_t isrflags = READ_REG(hirda->Instance->SR);
+ uint32_t cr1its = READ_REG(hirda->Instance->CR1);
+ uint32_t cr3its = READ_REG(hirda->Instance->CR3);
+ uint32_t errorflags = 0x00U;
+ uint32_t dmarequest = 0x00U;
+
+ /* If no error occurs */
+ errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE));
+ if(errorflags == RESET)
+ {
+ /* IRDA in mode Receiver -----------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ IRDA_Receive_IT(hirda);
+ return;
+ }
+ }
+
+ /* If some errors occur */
+ if((errorflags != RESET) && ((cr3its & (USART_CR3_EIE | USART_CR1_PEIE)) != RESET))
+ {
+ /* IRDA parity error interrupt occurred -------------------------------*/
+ if(((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+ {
+ hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
+ }
+
+ /* IRDA noise error interrupt occurred --------------------------------*/
+ if(((isrflags & USART_SR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hirda->ErrorCode |= HAL_IRDA_ERROR_NE;
+ }
+
+ /* IRDA frame error interrupt occurred --------------------------------*/
+ if(((isrflags & USART_SR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
+ }
+
+ /* IRDA Over-Run interrupt occurred -----------------------------------*/
+ if(((isrflags & USART_SR_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hirda->ErrorCode |= HAL_IRDA_ERROR_ORE;
+ }
+ /* Call IRDA Error Call back function if need be -----------------------*/
+ if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
+ {
+ /* IRDA in mode Receiver ---------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ IRDA_Receive_IT(hirda);
+ }
+
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR);
+ /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+ consider error as blocking */
+ if(((hirda->ErrorCode & HAL_IRDA_ERROR_ORE) != RESET) || dmarequest)
+ {
+ /* Blocking error : transfer is aborted
+ Set the IRDA state ready to be able to start again the process,
+ Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+ IRDA_EndRxTransfer(hirda);
+
+ /* Disable the IRDA DMA Rx request if enabled */
+ if(HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR))
+ {
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the IRDA DMA Rx channel */
+ if(hirda->hdmarx != NULL)
+ {
+ /* Set the IRDA DMA Abort callback :
+ will lead to call HAL_IRDA_ErrorCallback() at end of DMA abort procedure */
+ hirda->hdmarx->XferAbortCallback = IRDA_DMAAbortOnError;
+
+ if(HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hirda->hdmarx->XferAbortCallback(hirda->hdmarx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_IRDA_ErrorCallback(hirda);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_IRDA_ErrorCallback(hirda);
+ }
+ }
+ else
+ {
+ /* Non Blocking error : transfer could go on.
+ Error is notified to user through user error callback */
+ HAL_IRDA_ErrorCallback(hirda);
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ }
+ }
+ return;
+ } /* End if some error occurs */
+
+ /* IRDA in mode Transmitter ------------------------------------------------*/
+ if(((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+ {
+ IRDA_Transmit_IT(hirda);
+ return;
+ }
+
+ /* IRDA in mode Transmitter end --------------------------------------------*/
+ if(((isrflags & USART_SR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+ {
+ IRDA_EndTransmit_IT(hirda);
+ return;
+ }
+}
+
+/**
+ * @brief End ongoing Tx transfer on IRDA peripheral (following error detection or Transmit completion).
+ * @param hirda: IRDA handle.
+ * @retval None
+ */
+static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda)
+{
+ /* Disable TXEIE and TCIE interrupts */
+ CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+ /* At end of Tx process, restore hirda->gState to Ready */
+ hirda->gState = HAL_IRDA_STATE_READY;
+}
+
+/**
+ * @brief End ongoing Rx transfer on IRDA peripheral (following error detection or Reception completion).
+ * @param hirda: IRDA handle.
+ * @retval None
+ */
+static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda)
+{
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* At end of Rx process, restore hirda->RxState to Ready */
+ hirda->RxState = HAL_IRDA_STATE_READY;
+}
+
+/**
+ * @brief DMA IRDA communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hirda->RxXferCount = 0x00U;
+ hirda->TxXferCount = 0x00U;
+
+ HAL_IRDA_ErrorCallback(hirda);
+}
+
+/**
+ * @brief Tx Transfer complete callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+__weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer complete callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer complete callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_RxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief IRDA error callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief IRDA State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to return the State of IrDA
+ communication process and also return Peripheral Errors occurred during communication process
+ (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state of the IrDA peripheral.
+ (+) HAL_IRDA_GetError() check in run-time errors that could be occurred during communication.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the IRDA state.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL state
+ */
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda)
+{
+ uint32_t temp1 = 0x00U, temp2 = 0x00U;
+ temp1 = hirda->gState;
+ temp2 = hirda->RxState;
+
+ return (HAL_IRDA_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+ * @brief Return the IARDA error code
+ * @param hirda : pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA.
+ * @retval IRDA Error Code
+ */
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda)
+{
+ return hirda->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA IRDA transmit process complete callback.
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ hirda->TxXferCount = 0U;
+
+ /* Disable the DMA transfer for transmit request by setting the DMAT bit
+ in the IRDA CR3 register */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+ /* Enable the IRDA Transmit Complete Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE);
+ }
+ /* DMA Circular mode */
+ else
+ {
+ HAL_IRDA_TxCpltCallback(hirda);
+ }
+}
+
+/**
+ * @brief DMA IRDA receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_IRDA_TxHalfCpltCallback(hirda);
+}
+
+/**
+ * @brief DMA IRDA receive process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ hirda->RxXferCount = 0U;
+
+ /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+ in the IRDA CR3 register */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+ /* At end of Rx process, restore hirda->RxState to Ready */
+ hirda->RxState = HAL_IRDA_STATE_READY;
+ }
+
+ HAL_IRDA_RxCpltCallback(hirda);
+}
+
+/**
+ * @brief DMA IRDA receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ HAL_IRDA_RxHalfCpltCallback(hirda);
+}
+
+/**
+ * @brief DMA IRDA communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma)
+{
+ uint32_t dmarequest = 0x00U;
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Stop IRDA DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT);
+ if((hirda->gState == HAL_IRDA_STATE_BUSY_TX) && dmarequest)
+ {
+ hirda->TxXferCount = 0U;
+ IRDA_EndTxTransfer(hirda);
+ }
+
+ /* Stop IRDA DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR);
+ if((hirda->RxState == HAL_IRDA_STATE_BUSY_RX) && dmarequest)
+ {
+ hirda->RxXferCount = 0U;
+ IRDA_EndRxTransfer(hirda);
+ }
+
+ hirda->ErrorCode |= HAL_IRDA_ERROR_DMA;
+
+ HAL_IRDA_ErrorCallback(hirda);
+}
+
+/**
+ * @brief This function handles IRDA Communication Timeout.
+ * @param hirda pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param Flag specifies the IRDA flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Tickstart Tick start value
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is set */
+ while((__HAL_IRDA_GET_FLAG(hirda, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ hirda->gState = HAL_IRDA_STATE_READY;
+ hirda->RxState = HAL_IRDA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+ /**
+ * @brief Send an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda)
+{
+ uint16_t* tmp;
+
+ /* Check that a Tx process is ongoing */
+ if(hirda->gState == HAL_IRDA_STATE_BUSY_TX)
+ {
+ if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) hirda->pTxBuffPtr;
+ hirda->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ hirda->pTxBuffPtr += 2U;
+ }
+ else
+ {
+ hirda->pTxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ hirda->Instance->DR = (uint8_t)(*hirda->pTxBuffPtr++ & (uint8_t)0x00FFU);
+ }
+
+ if(--hirda->TxXferCount == 0U)
+ {
+ /* Disable the IRDA Transmit Data Register Empty Interrupt */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Enable the IRDA Transmit Complete Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda)
+{
+ /* Disable the IRDA Transmit Complete Interrupt */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TCIE);
+
+ /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Tx process is ended, restore hirda->gState to Ready */
+ hirda->gState = HAL_IRDA_STATE_READY;
+
+ HAL_IRDA_TxCpltCallback(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda)
+{
+ uint16_t* tmp;
+ uint16_t uhdata;
+
+ /* Check that a Rx process is ongoing */
+ if(hirda->RxState == HAL_IRDA_STATE_BUSY_RX)
+ {
+ uhdata = (uint16_t) READ_REG(hirda->Instance->DR);
+ if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) hirda->pRxBuffPtr;
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(uhdata & (uint16_t)0x01FFU);
+ hirda->pRxBuffPtr += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(uhdata & (uint16_t)0x00FFU);
+ hirda->pRxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ *hirda->pRxBuffPtr++ = (uint8_t)(uhdata & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *hirda->pRxBuffPtr++ = (uint8_t)(uhdata & (uint8_t)0x007FU);
+ }
+ }
+
+ if(--hirda->RxXferCount == 0U)
+ {
+ /* Disable the IRDA Data Register not empty Interrupt */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the IRDA Parity Error Interrupt */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Rx process is completed, restore hirda->RxState to Ready */
+ hirda->RxState = HAL_IRDA_STATE_READY;
+
+ HAL_IRDA_RxCpltCallback(hirda);
+
+ return HAL_OK;
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configures the IRDA peripheral.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+static void IRDA_SetConfig(IRDA_HandleTypeDef *hirda)
+{
+ /* Check the parameters */
+ assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+ assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate));
+ assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength));
+ assert_param(IS_IRDA_PARITY(hirda->Init.Parity));
+ assert_param(IS_IRDA_MODE(hirda->Init.Mode));
+
+ /*-------------------------- IRDA CR2 Configuration ------------------------*/
+ /* Clear STOP[13:12] bits */
+ CLEAR_BIT(hirda->Instance->CR2, USART_CR2_STOP);
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ /* Clear M, PCE, PS, TE and RE bits */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE);
+
+ /* Configure the USART Word Length, Parity and mode:
+ Set the M bits according to hirda->Init.WordLength value
+ Set PCE and PS bits according to hirda->Init.Parity value
+ Set TE and RE bits according to hirda->Init.Mode value */
+ /* Write to USART CR1 */
+ SET_BIT(hirda->Instance->CR1, (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* Clear CTSE and RTSE bits */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_RTSE | USART_CR3_CTSE);
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ if((hirda->Instance == USART1) || (hirda->Instance == USART6))
+ {
+ SET_BIT(hirda->Instance->BRR, IRDA_BRR(HAL_RCC_GetPCLK2Freq(), hirda->Init.BaudRate));
+ }
+ else
+ {
+ SET_BIT(hirda->Instance->BRR, IRDA_BRR(HAL_RCC_GetPCLK1Freq(), hirda->Init.BaudRate));
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_IRDA_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,594 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of IRDA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IRDA_H
+#define __STM32F4xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+ * @{
+ */
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDA_Word_Length */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler */
+
+ uint32_t IrDAMode; /*!< Specifies the IrDA mode
+ This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL IRDA State structures definition
+ * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains IRDA state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized. HAL IRDA Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+ HAL_IRDA_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_IRDA_STATE_BUSY = 0x24U, /*!< An internal process is ongoing
+ Value is allowed for gState only */
+ HAL_IRDA_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_IRDA_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+ HAL_IRDA_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
+ Value is allowed for gState only */
+ HAL_IRDA_STATE_ERROR = 0xE0U /*!< Error
+ Value is allowed for gState only */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ IRDA_InitTypeDef Init; /* IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_IRDA_StateTypeDef gState; /* IRDA state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+ __IO HAL_IRDA_StateTypeDef RxState; /* IRDA state information related to Rx operations.
+ This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /* IRDA Error code */
+
+}IRDA_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported constants
+ * @{
+ */
+/** @defgroup IRDA_Error_Code IRDA Error Code
+ * @brief IRDA Error Code
+ * @{
+ */
+#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Word_Length IRDA Word Length
+ * @{
+ */
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000U)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Parity IRDA Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint32_t)0x00000000U)
+#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Mode IRDA Transfer Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+ * @{
+ */
+#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP)
+#define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags IRDA Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080U)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040U)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020U)
+#define IRDA_FLAG_IDLE ((uint32_t)0x00000010U)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008U)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004U)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002U)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * @{
+ */
+#define IRDA_IT_PE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define IRDA_IT_TXE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define IRDA_IT_TC ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define IRDA_IT_RXNE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define IRDA_IT_IDLE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+
+#define IRDA_IT_LBD ((uint32_t)(IRDA_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
+
+#define IRDA_IT_CTS ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
+#define IRDA_IT_ERR ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+ * @{
+ */
+
+/** @brief Reset IRDA handle gstate & RxState
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \
+ } while(0)
+
+/** @brief Flushs the IRDA DR register
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified IRDA pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg IRDA_FLAG_TC: Transmission Complete flag.
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the IRDA PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the IRDA FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK)))
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK)))
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK))
+
+/** @brief Macro to enable the IRDA's one bit sample method
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Macro to disable the IRDA's one bit sample method
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * IRDA Handle selects the USARTx or UARTy peripheral
+ * (USART,UART availability and x,y values depending on device).
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * IRDA Handle selects the USARTx or UARTy peripheral
+ * (USART,UART availability and x,y values depending on device).
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IRDA_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Constants IRDA Private Constants
+ * @{
+ */
+
+/** @brief IRDA interruptions flag mask
+ *
+ */
+#define IRDA_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
+
+#define IRDA_CR1_REG_INDEX 1U
+#define IRDA_CR2_REG_INDEX 2U
+#define IRDA_CR3_REG_INDEX 3U
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup IRDA_Private_Macros IRDA Private Macros
+ * @{
+ */
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+#define IS_IRDA_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3U) == 0x00U) && ((MODE) != (uint32_t)0x00000000U))
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+#define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201U)
+
+#define IRDA_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
+#define IRDA_DIVMANT(_PCLK_, _BAUD_) (IRDA_DIV((_PCLK_), (_BAUD_))/100U)
+#define IRDA_DIVFRAQ(_PCLK_, _BAUD_) (((IRDA_DIV((_PCLK_), (_BAUD_)) - (IRDA_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+ = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
+#define IRDA_BRR(_PCLK_, _BAUD_) (((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4U) + \
+ (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0U)) + \
+ (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Functions IRDA Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,258 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_iwdg.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief IWDG HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Independent Watchdog (IWDG) peripheral:
+ * + Initialization and Start functions
+ * + IO operation functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### IWDG Generic features #####
+ ==============================================================================
+ [..]
+ (+) The IWDG can be started by either software or hardware (configurable
+ through option byte).
+
+ (+) The IWDG is clocked by Low-Speed clock (LSI) and thus stays active even
+ if the main clock fails.
+
+ (+) Once the IWDG is started, the LSI is forced ON and both can not be
+ disabled. The counter starts counting down from the reset value (0xFFF).
+ When it reaches the end of count value (0x000) a reset signal is
+ generated (IWDG reset).
+
+ (+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register,
+ the IWDG_RLR value is reloaded in the counter and the watchdog reset is
+ prevented.
+
+ (+) The IWDG is implemented in the VDD voltage domain that is still functional
+ in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
+ IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
+ reset occurs.
+
+ (+) Debug mode : When the microcontroller enters debug mode (core halted),
+ the IWDG counter either continues to work normally or stops, depending
+ on DBG_IWDG_STOP configuration bit in DBG module, accessible through
+ __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros
+
+ [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
+ The IWDG timeout may vary due to LSI frequency dispersion. STM32F4xx
+ devices provide the capability to measure the LSI frequency (LSI clock
+ connected internally to TIM5 CH4 input capture). The measured value
+ can be used to have an IWDG timeout with an acceptable accuracy.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Use IWDG using HAL_IWDG_Init() function to :
+ (+) Enable instance by writing Start keyword in IWDG_KEY register. LSI
+ clock is forced ON and IWDG counter starts downcounting.
+ (+) Enable write access to configuration register: IWDG_PR & IWDG_RLR.
+ (+) Configure the IWDG prescaler and counter reload value. This reload
+ value will be loaded in the IWDG counter each time the watchdog is
+ reloaded, then the IWDG will start counting down from this value.
+ (+) wait for status flags to be reset"
+
+ (#) Then the application program must refresh the IWDG counter at regular
+ intervals during normal operation to prevent an MCU reset, using
+ HAL_IWDG_Refresh() function.
+
+ *** IWDG HAL driver macros list ***
+ ====================================
+ [..]
+ Below the list of most used macros in IWDG HAL driver:
+ (+) __HAL_IWDG_START: Enable the IWDG peripheral
+ (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in
+ the reload register
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+/** @addtogroup IWDG
+ * @brief IWDG HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Defines IWDG Private Defines
+ * @{
+ */
+/* Status register need 5 RC LSI divided by prescaler clock to be updated. With
+ higher prescaler (256), and according to HSI variation, we need to wait at
+ least 6 cycles so 48 ms. */
+#define HAL_IWDG_DEFAULT_TIMEOUT 48U
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup IWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group1
+ * @brief Initialization and Start functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Start functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the IWDG according to the specified parameters in the
+ IWDG_InitTypeDef of associated handle.
+ (+) Once initialization is performed in HAL_IWDG_Init function, Watchdog
+ is reloaded in order to exit function with correct time base.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the IWDG according to the specified parameters in the
+ * IWDG_InitTypeDef and start watchdog. Before exiting function,
+ * watchdog is refreshed in order to have correct time base.
+ * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified IWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg)
+{
+ uint32_t tickstart;
+
+ /* Check the IWDG handle allocation */
+ if(hiwdg == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance));
+ assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler));
+ assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload));
+
+ /* Enable IWDG. LSI is turned on automaticaly */
+ __HAL_IWDG_START(hiwdg);
+
+ /* Enable write access to IWDG_PR and IWDG_RLR registers by writing 0x5555 in KR */
+ IWDG_ENABLE_WRITE_ACCESS(hiwdg);
+
+ /* Write to IWDG registers the Prescaler & Reload values to work with */
+ hiwdg->Instance->PR = hiwdg->Init.Prescaler;
+ hiwdg->Instance->RLR = hiwdg->Init.Reload;
+
+ /* Check pending flag, if previous update not done, return timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait for register to be updated */
+ while(hiwdg->Instance->SR != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HAL_IWDG_DEFAULT_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reload IWDG counter with value defined in the reload register */
+ __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group2
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Refresh the IWDG.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Refresh the IWDG.
+ * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified IWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg)
+{
+ /* Reload IWDG counter with value defined in the reload register */
+ __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_IWDG_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,243 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IWDG_H
+#define __STM32F4xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG Handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+
+}IWDG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 0x00000000U /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Enable the IWDG peripheral.
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
+
+/**
+ * @brief Reload IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR & IWDG_RLR registers disabled).
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
+ * @{
+ */
+
+/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions
+ * @{
+ */
+/* Initialization/Start functions ********************************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IWDG_Private_Constants IWDG Private Constants
+ * @{
+ */
+
+/**
+ * @brief IWDG Key Register BitMask
+ */
+#define IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */
+#define IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */
+#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */
+#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Macros IWDG Private Macros
+ * @{
+ */
+
+/**
+ * @brief Enable write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
+
+/**
+ * @brief Disable write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
+
+/**
+ * @brief Check IWDG prescaler value.
+ * @param __PRESCALER__ IWDG prescaler value
+ * @retval None
+ */
+#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_8) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+ ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+/**
+ * @brief Check IWDG reload value.
+ * @param __RELOAD__ IWDG reload value
+ * @retval None
+ */
+#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1696 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_lptim.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief LPTIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Low Power Timer (LPTIM) peripheral:
+ * + Initialization and de-initialization functions.
+ * + Start/Stop operation functions in polling mode.
+ * + Start/Stop operation functions in interrupt mode.
+ * + Reading operation functions.
+ * + Peripheral State functions.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LPTIM HAL driver can be used as follows:
+
+ (#)Initialize the LPTIM low level resources by implementing the
+ HAL_LPTIM_MspInit():
+ (##) Enable the LPTIM interface clock using __LPTIMx_CLK_ENABLE().
+ (##) In case of using interrupts (e.g. HAL_LPTIM_PWM_Start_IT()):
+ (+++) Configure the LPTIM interrupt priority using HAL_NVIC_SetPriority().
+ (+++) Enable the LPTIM IRQ handler using HAL_NVIC_EnableIRQ().
+ (+++) In LPTIM IRQ handler, call HAL_LPTIM_IRQHandler().
+
+ (#)Initialize the LPTIM HAL using HAL_LPTIM_Init(). This function
+ configures mainly:
+ (##) The instance: LPTIM1.
+ (##) Clock: the counter clock.
+ (+++) Source : it can be either the ULPTIM input (IN1) or one of
+ the internal clock; (APB, LSE or LSI).
+ (+++) Prescaler: select the clock divider.
+ (##) UltraLowPowerClock : To be used only if the ULPTIM is selected
+ as counter clock source.
+ (+++) Polarity: polarity of the active edge for the counter unit
+ if the ULPTIM input is selected.
+ (+++) SampleTime: clock sampling time to configure the clock glitch
+ filter.
+ (##) Trigger: How the counter start.
+ (+++) Source: trigger can be software or one of the hardware triggers.
+ (+++) ActiveEdge : only for hardware trigger.
+ (+++) SampleTime : trigger sampling time to configure the trigger
+ glitch filter.
+ (##) OutputPolarity : 2 opposite polarities are possibles.
+ (##) UpdateMode: specifies whether the update of the autoreload and
+ the compare values is done immediately or after the end of current
+ period.
+
+ (#)Six modes are available:
+
+ (##) PWM Mode: To generate a PWM signal with specified period and pulse,
+ call HAL_LPTIM_PWM_Start() or HAL_LPTIM_PWM_Start_IT() for interruption
+ mode.
+
+ (##) One Pulse Mode: To generate pulse with specified width in response
+ to a stimulus, call HAL_LPTIM_OnePulse_Start() or
+ HAL_LPTIM_OnePulse_Start_IT() for interruption mode.
+
+ (##) Set once Mode: In this mode, the output changes the level (from
+ low level to high level if the output polarity is configured high, else
+ the opposite) when a compare match occurs. To start this mode, call
+ HAL_LPTIM_SetOnce_Start() or HAL_LPTIM_SetOnce_Start_IT() for
+ interruption mode.
+
+ (##) Encoder Mode: To use the encoder interface call
+ HAL_LPTIM_Encoder_Start() or HAL_LPTIM_Encoder_Start_IT() for
+ interruption mode.
+
+ (##) Time out Mode: an active edge on one selected trigger input rests
+ the counter. The first trigger event will start the timer, any
+ successive trigger event will reset the counter and the timer will
+ restart. To start this mode call HAL_LPTIM_TimeOut_Start_IT() or
+ HAL_LPTIM_TimeOut_Start_IT() for interruption mode.
+
+ (##) Counter Mode: counter can be used to count external events on
+ the LPTIM Input1 or it can be used to count internal clock cycles.
+ To start this mode, call HAL_LPTIM_Counter_Start() or
+ HAL_LPTIM_Counter_Start_IT() for interruption mode.
+
+ (#) User can stop any process by calling the corresponding API:
+ HAL_LPTIM_Xxx_Stop() or HAL_LPTIM_Xxx_Stop_IT() if the process is
+ already started in interruption mode.
+
+ (#)Call HAL_LPTIM_DeInit() to deinitialize the LPTIM peripheral.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup LPTIM LPTIM
+ * @brief LPTIM HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Types LPTIM Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Defines LPTIM Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Variables LPTIM Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Constants LPTIM Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Macros LPTIM Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup LPTIM_Private_Functions_Prototypes LPTIM Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Functions LPTIM Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
+ * @{
+ */
+
+/** @defgroup LPTIM_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the LPTIM according to the specified parameters in the
+ LPTIM_InitTypeDef and creates the associated handle.
+ (+) DeInitialize the LPTIM peripheral.
+ (+) Initialize the LPTIM MSP.
+ (+) DeInitialize LPTIM MSP.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the LPTIM according to the specified parameters in the
+ * LPTIM_InitTypeDef and creates the associated handle.
+ * @param hlptim: LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim)
+{
+ uint32_t tmpcfgr = 0U;
+
+ /* Check the LPTIM handle allocation */
+ if(hlptim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source));
+ assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler));
+ if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM)
+ {
+ assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+ assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime));
+ }
+ assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source));
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime));
+ assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge));
+ }
+ assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity));
+ assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode));
+ assert_param(IS_LPTIM_COUNTER_SOURCE(hlptim->Init.CounterSource));
+
+ if(hlptim->State == HAL_LPTIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hlptim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_LPTIM_MspInit(hlptim);
+ }
+
+ /* Change the LPTIM state */
+ hlptim->State = HAL_LPTIM_STATE_BUSY;
+
+ /* Get the LPTIMx CFGR value */
+ tmpcfgr = hlptim->Instance->CFGR;
+
+ if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM)
+ {
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT));
+ }
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ tmpcfgr &= (uint32_t)(~ (LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL));
+ }
+
+ /* Clear CKSEL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD |
+ LPTIM_CFGR_WAVPOL | LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE ));
+
+ /* Set initialization parameters */
+ tmpcfgr |= (hlptim->Init.Clock.Source |
+ hlptim->Init.Clock.Prescaler |
+ hlptim->Init.OutputPolarity |
+ hlptim->Init.UpdateMode |
+ hlptim->Init.CounterSource);
+
+ if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM)
+ {
+ tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity |
+ hlptim->Init.UltraLowPowerClock.SampleTime);
+ }
+
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Enable External trigger and set the trigger source */
+ tmpcfgr |= (hlptim->Init.Trigger.Source |
+ hlptim->Init.Trigger.ActiveEdge |
+ hlptim->Init.Trigger.SampleTime);
+ }
+
+ /* Write to LPTIMx CFGR */
+ hlptim->Instance->CFGR = tmpcfgr;
+
+ /* Change the LPTIM state */
+ hlptim->State = HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the LPTIM peripheral.
+ * @param hlptim: LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the LPTIM handle allocation */
+ if(hlptim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change the LPTIM state */
+ hlptim->State = HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the LPTIM Peripheral Clock */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* DeInit the low level hardware: CLOCK, NVIC.*/
+ HAL_LPTIM_MspDeInit(hlptim);
+
+ /* Change the LPTIM state */
+ hlptim->State = HAL_LPTIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hlptim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the LPTIM MSP.
+ * @param hlptim: LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes LPTIM MSP.
+ * @param hlptim: LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Group2 LPTIM Start-Stop operation functions
+ * @brief Start-Stop operation functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### LPTIM Start Stop operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start the PWM mode.
+ (+) Stop the PWM mode.
+ (+) Start the One pulse mode.
+ (+) Stop the One pulse mode.
+ (+) Start the Set once mode.
+ (+) Stop the Set once mode.
+ (+) Start the Encoder mode.
+ (+) Stop the Encoder mode.
+ (+) Start the Timeout mode.
+ (+) Stop the Timeout mode.
+ (+) Start the Counter mode.
+ (+) Stop the Counter mode.
+
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the LPTIM PWM generation.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Reset WAVE bit to set PWM mode */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM PWM generation.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM PWM generation in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Reset WAVE bit to set PWM mode */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+
+ /* Enable Autoreload write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Enable Compare write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Enable Autoreload match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Enable Compare match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then enable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Enable external trigger interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM PWM generation in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Disable Autoreload write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Disable Compare write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Disable Autoreload match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Disable Compare match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then disable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Disable external trigger interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM One pulse generation.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Reset WAVE bit to set one pulse mode */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_SINGLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM One pulse generation.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM One pulse generation in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Reset WAVE bit to set one pulse mode */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+
+ /* Enable Autoreload write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Enable Compare write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Enable Autoreload match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Enable Compare match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then enable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Enable external trigger interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_SINGLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM One pulse generation in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Disable Autoreload write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Disable Compare write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Disable Autoreload match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Disable Compare match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then disable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Disable external trigger interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM in Set once mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Set WAVE bit to enable the set once mode */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in single mode */
+ __HAL_LPTIM_START_SINGLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM Set once mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM Set once mode in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Set WAVE bit to enable the set once mode */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE;
+
+ /* Enable Autoreload write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Enable Compare write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Enable Autoreload match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Enable Compare match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then enable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Enable external trigger interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in single mode */
+ __HAL_LPTIM_START_SINGLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM Set once mode in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Disable Autoreload write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Disable Compare write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Disable Autoreload match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Disable Compare match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then disable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Disable external trigger interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Encoder interface.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+ uint32_t tmpcfgr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC);
+ assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1);
+ assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Get the LPTIMx CFGR value */
+ tmpcfgr = hlptim->Instance->CFGR;
+
+ /* Clear CKPOL bits */
+ tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL);
+
+ /* Set Input polarity */
+ tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity;
+
+ /* Write to LPTIMx CFGR */
+ hlptim->Instance->CFGR = tmpcfgr;
+
+ /* Set ENC bit to enable the encoder interface */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_ENC;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Encoder interface.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Reset ENC bit to disable the encoder interface */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC;
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Encoder interface in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+ uint32_t tmpcfgr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC);
+ assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1);
+ assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Configure edge sensitivity for encoder mode */
+ /* Get the LPTIMx CFGR value */
+ tmpcfgr = hlptim->Instance->CFGR;
+
+ /* Clear CKPOL bits */
+ tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL);
+
+ /* Set Input polarity */
+ tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity;
+
+ /* Write to LPTIMx CFGR */
+ hlptim->Instance->CFGR = tmpcfgr;
+
+ /* Set ENC bit to enable the encoder interface */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_ENC;
+
+ /* Enable "switch to down direction" interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_DOWN);
+
+ /* Enable "switch to up direction" interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_UP);
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Encoder interface in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Reset ENC bit to disable the encoder interface */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC;
+
+ /* Disable "switch to down direction" interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_DOWN);
+
+ /* Disable "switch to up direction" interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_UP);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Timeout function. The first trigger event will start the
+ * timer, any successive trigger event will reset the counter and
+ * the timer restarts.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Timeout : Specifies the TimeOut value to rest the counter.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Timeout));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Set TIMOUT bit to enable the timeout function */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the Timeout value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Timeout);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Timeout function.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Reset TIMOUT bit to enable the timeout function */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT;
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Timeout function in interrupt mode. The first trigger
+ * event will start the timer, any successive trigger event will reset
+ * the counter and the timer restarts.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Timeout : Specifies the TimeOut value to rest the counter.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Timeout));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT();
+
+ /* Enable rising edge trigger on the LPTIM Wake-up Timer Exti line */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();
+
+ /* Set TIMOUT bit to enable the timeout function */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT;
+
+ /* Enable Compare match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the Timeout value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Timeout);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Timeout function in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable rising edge trigger on the LPTIM Wake-up Timer Exti line */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();
+
+ /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT();
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Reset TIMOUT bit to enable the timeout function */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT;
+
+ /* Disable Compare match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Counter mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
+ if((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+ {
+ /* Check if clock is prescaled */
+ assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
+ /* Set clock prescaler to 0 */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC;
+ }
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Counter mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Counter mode in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT();
+
+ /* Enable rising edge trigger on the LPTIM Wake-up Timer Exti line */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();
+
+ /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
+ if((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+ {
+ /* Check if clock is prescaled */
+ assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
+ /* Set clock prescaler to 0 */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC;
+ }
+
+ /* Enable Autoreload write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Enable Autoreload match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Counter mode in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable rising edge trigger on the LPTIM Wake-up Timer Exti line */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();
+
+ /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT();
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Disable Autoreload write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Disable Autoreload match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Group3 LPTIM Read operation functions
+ * @brief Read operation functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### LPTIM Read operation functions #####
+ ==============================================================================
+[..] This section provides LPTIM Reading functions.
+ (+) Read the counter value.
+ (+) Read the period (Auto-reload) value.
+ (+) Read the pulse (Compare)value.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function returns the current counter value.
+ * @param hlptim: LPTIM handle
+ * @retval Counter value.
+ */
+uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ return (hlptim->Instance->CNT);
+}
+
+/**
+ * @brief This function return the current Autoreload (Period) value.
+ * @param hlptim: LPTIM handle
+ * @retval Autoreload value.
+ */
+uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ return (hlptim->Instance->ARR);
+}
+
+/**
+ * @brief This function return the current Compare (Pulse) value.
+ * @param hlptim: LPTIM handle
+ * @retval Compare value.
+ */
+uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ return (hlptim->Instance->CMP);
+}
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup LPTIM_Group4 LPTIM IRQ handler
+ * @brief LPTIM IRQ handler.
+ *
+@verbatim
+ ==============================================================================
+ ##### LPTIM IRQ handler #####
+ ==============================================================================
+[..] This section provides LPTIM IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function handles LPTIM interrupt request.
+ * @param hlptim: LPTIM handle
+ * @retval None
+ */
+void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Compare match interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPM) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMPM) !=RESET)
+ {
+ /* Clear Compare match flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPM);
+ /* Compare match Callback */
+ HAL_LPTIM_CompareMatchCallback(hlptim);
+ }
+ }
+
+ /* Autoreload match interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARRM) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARRM) !=RESET)
+ {
+ /* Clear Autoreload match flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARRM);
+ /* Autoreload match Callback */
+ HAL_LPTIM_AutoReloadMatchCallback(hlptim);
+ }
+ }
+
+ /* Trigger detected interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_EXTTRIG) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_EXTTRIG) !=RESET)
+ {
+ /* Clear Trigger detected flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_EXTTRIG);
+ /* Trigger detected callback */
+ HAL_LPTIM_TriggerCallback(hlptim);
+ }
+ }
+
+ /* Compare write interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPOK) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_FLAG_CMPM) !=RESET)
+ {
+ /* Clear Compare write flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK);
+ /* Compare write Callback */
+ HAL_LPTIM_CompareWriteCallback(hlptim);
+ }
+ }
+
+ /* Autoreload write interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARROK) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARROK) !=RESET)
+ {
+ /* Clear Autoreload write flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK);
+ /* Autoreload write Callback */
+ HAL_LPTIM_AutoReloadWriteCallback(hlptim);
+ }
+ }
+
+ /* Direction counter changed from Down to Up interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_UP) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_UP) !=RESET)
+ {
+ /* Clear Direction counter changed from Down to Up flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_UP);
+ /* Direction counter changed from Down to Up Callback */
+ HAL_LPTIM_DirectionUpCallback(hlptim);
+ }
+ }
+
+ /* Direction counter changed from Up to Down interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_DOWN) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_DOWN) !=RESET)
+ {
+ /* Clear Direction counter changed from Up to Down flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DOWN);
+ /* Direction counter changed from Up to Down Callback */
+ HAL_LPTIM_DirectionDownCallback(hlptim);
+ }
+ }
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_CLEAR_FLAG();
+}
+
+/**
+ * @brief Compare match callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_CompareMatchCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Autoreload match callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_AutoReloadMatchCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Trigger detected callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Compare write callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_CompareWriteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Autoreload write callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_AutoReloadWriteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Direction counter changed from Down to Up callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_DirectionUpCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Direction counter changed from Up to Down callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_DirectionDownCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Group5 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the LPTIM state.
+ * @param hlptim: LPTIM handle
+ * @retval HAL state
+ */
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim)
+{
+ return hlptim->State;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,763 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_lptim.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of LPTIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LPTIM_H
+#define __STM32F4xx_HAL_LPTIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup LPTIM LPTIM
+ * @brief LPTIM HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Types LPTIM Exported Types
+ * @{
+ */
+
+/** @defgroup LPTIM_WAKEUPTIMER_EXTILINE LPTIM WAKEUP Timer EXTI Line
+ * @{
+ */
+#define LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR23) /*!< External interrupt line 23 Connected to the LPTIM EXTI Line */
+/**
+ * @}
+ */
+
+/**
+ * @brief LPTIM Clock configuration definition
+ */
+typedef struct
+{
+ uint32_t Source; /*!< Selects the clock source.
+ This parameter can be a value of @ref LPTIM_Clock_Source */
+
+ uint32_t Prescaler; /*!< Specifies the counter clock Prescaler.
+ This parameter can be a value of @ref LPTIM_Clock_Prescaler */
+
+}LPTIM_ClockConfigTypeDef;
+
+/**
+ * @brief LPTIM Clock configuration definition
+ */
+typedef struct
+{
+ uint32_t Polarity; /*!< Selects the polarity of the active edge for the counter unit
+ if the ULPTIM input is selected.
+ Note: This parameter is used only when Ultra low power clock source is used.
+ Note: If the polarity is configured on 'both edges', an auxiliary clock
+ (one of the Low power oscillator) must be active.
+ This parameter can be a value of @ref LPTIM_Clock_Polarity */
+
+ uint32_t SampleTime; /*!< Selects the clock sampling time to configure the clock glitch filter.
+ Note: This parameter is used only when Ultra low power clock source is used.
+ This parameter can be a value of @ref LPTIM_Clock_Sample_Time */
+
+}LPTIM_ULPClockConfigTypeDef;
+
+/**
+ * @brief LPTIM Trigger configuration definition
+ */
+typedef struct
+{
+ uint32_t Source; /*!< Selects the Trigger source.
+ This parameter can be a value of @ref LPTIM_Trigger_Source */
+
+ uint32_t ActiveEdge; /*!< Selects the Trigger active edge.
+ Note: This parameter is used only when an external trigger is used.
+ This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */
+
+ uint32_t SampleTime; /*!< Selects the trigger sampling time to configure the clock glitch filter.
+ Note: This parameter is used only when an external trigger is used.
+ This parameter can be a value of @ref LPTIM_Trigger_Sample_Time */
+}LPTIM_TriggerConfigTypeDef;
+
+/**
+ * @brief LPTIM Initialization Structure definition
+ */
+typedef struct
+{
+ LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */
+
+ LPTIM_ULPClockConfigTypeDef UltraLowPowerClock; /*!< Specifies the Ultra Low Power clock parameters */
+
+ LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */
+
+ uint32_t OutputPolarity; /*!< Specifies the Output polarity.
+ This parameter can be a value of @ref LPTIM_Output_Polarity */
+
+ uint32_t UpdateMode; /*!< Specifies whether the update of the autorelaod and the compare
+ values is done immediately or after the end of current period.
+ This parameter can be a value of @ref LPTIM_Updating_Mode */
+
+ uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event
+ or each external event.
+ This parameter can be a value of @ref LPTIM_Counter_Source */
+
+}LPTIM_InitTypeDef;
+
+/**
+ * @brief HAL LPTIM State structure definition
+ */
+typedef enum __HAL_LPTIM_StateTypeDef
+{
+ HAL_LPTIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_LPTIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_LPTIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_LPTIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_LPTIM_STATE_ERROR = 0x04U /*!< Internal Process is ongoing */
+}HAL_LPTIM_StateTypeDef;
+
+/**
+ * @brief LPTIM handle Structure definition
+ */
+typedef struct
+{
+ LPTIM_TypeDef *Instance; /*!< Register base address */
+
+ LPTIM_InitTypeDef Init; /*!< LPTIM required parameters */
+
+ HAL_StatusTypeDef Status; /*!< LPTIM peripheral status */
+
+ HAL_LockTypeDef Lock; /*!< LPTIM locking object */
+
+ __IO HAL_LPTIM_StateTypeDef State; /*!< LPTIM peripheral state */
+
+}LPTIM_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Constants LPTIM Exported Constants
+ * @{
+ */
+
+/** @defgroup LPTIM_Clock_Source LPTIM Clock Source
+ * @{
+ */
+#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC ((uint32_t)0x00U)
+#define LPTIM_CLOCKSOURCE_ULPTIM LPTIM_CFGR_CKSEL
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Clock_Prescaler LPTIM Clock Prescaler
+ * @{
+ */
+#define LPTIM_PRESCALER_DIV1 ((uint32_t)0x00000000U)
+#define LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0
+#define LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1
+#define LPTIM_PRESCALER_DIV8 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1))
+#define LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2
+#define LPTIM_PRESCALER_DIV32 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2))
+#define LPTIM_PRESCALER_DIV64 ((uint32_t)(LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2))
+#define LPTIM_PRESCALER_DIV128 ((uint32_t)LPTIM_CFGR_PRESC)
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Output_Polarity LPTIM Output Polarity
+ * @{
+ */
+
+#define LPTIM_OUTPUTPOLARITY_HIGH ((uint32_t)0x00000000U)
+#define LPTIM_OUTPUTPOLARITY_LOW (LPTIM_CFGR_WAVPOL)
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Clock_Sample_Time LPTIM Clock Sample Time
+ * @{
+ */
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION ((uint32_t)0x00000000U)
+#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS LPTIM_CFGR_CKFLT_0
+#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS LPTIM_CFGR_CKFLT_1
+#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS LPTIM_CFGR_CKFLT
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Clock_Polarity LPTIM Clock Polarity
+ * @{
+ */
+
+#define LPTIM_CLOCKPOLARITY_RISING ((uint32_t)0x00000000U)
+#define LPTIM_CLOCKPOLARITY_FALLING LPTIM_CFGR_CKPOL_0
+#define LPTIM_CLOCKPOLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Trigger_Source LPTIM Trigger Source
+ * @{
+ */
+#define LPTIM_TRIGSOURCE_SOFTWARE ((uint32_t)0x0000FFFFU)
+#define LPTIM_TRIGSOURCE_0 ((uint32_t)0x00000000U)
+#define LPTIM_TRIGSOURCE_1 ((uint32_t)LPTIM_CFGR_TRIGSEL_0)
+#define LPTIM_TRIGSOURCE_2 LPTIM_CFGR_TRIGSEL_1
+#define LPTIM_TRIGSOURCE_3 ((uint32_t)LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_1)
+#define LPTIM_TRIGSOURCE_4 LPTIM_CFGR_TRIGSEL_2
+#define LPTIM_TRIGSOURCE_5 ((uint32_t)LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_2)
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_External_Trigger_Polarity LPTIM External Trigger Polarity
+ * @{
+ */
+#define LPTIM_ACTIVEEDGE_RISING LPTIM_CFGR_TRIGEN_0
+#define LPTIM_ACTIVEEDGE_FALLING LPTIM_CFGR_TRIGEN_1
+#define LPTIM_ACTIVEEDGE_RISING_FALLING LPTIM_CFGR_TRIGEN
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Trigger_Sample_Time LPTIM Trigger Sample Time
+ * @{
+ */
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION ((uint32_t)0x00000000U)
+#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS LPTIM_CFGR_TRGFLT_0
+#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS LPTIM_CFGR_TRGFLT_1
+#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS LPTIM_CFGR_TRGFLT
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Updating_Mode LPTIM Updating Mode
+ * @{
+ */
+
+#define LPTIM_UPDATE_IMMEDIATE ((uint32_t)0x00000000U)
+#define LPTIM_UPDATE_ENDOFPERIOD LPTIM_CFGR_PRELOAD
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Counter_Source LPTIM Counter Source
+ * @{
+ */
+
+#define LPTIM_COUNTERSOURCE_INTERNAL ((uint32_t)0x00000000U)
+#define LPTIM_COUNTERSOURCE_EXTERNAL LPTIM_CFGR_COUNTMODE
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Flag_Definition LPTIM Flag Definition
+ * @{
+ */
+
+#define LPTIM_FLAG_DOWN LPTIM_ISR_DOWN
+#define LPTIM_FLAG_UP LPTIM_ISR_UP
+#define LPTIM_FLAG_ARROK LPTIM_ISR_ARROK
+#define LPTIM_FLAG_CMPOK LPTIM_ISR_CMPOK
+#define LPTIM_FLAG_EXTTRIG LPTIM_ISR_EXTTRIG
+#define LPTIM_FLAG_ARRM LPTIM_ISR_ARRM
+#define LPTIM_FLAG_CMPM LPTIM_ISR_CMPM
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Interrupts_Definition LPTIM Interrupts Definition
+ * @{
+ */
+
+#define LPTIM_IT_DOWN LPTIM_IER_DOWNIE
+#define LPTIM_IT_UP LPTIM_IER_UPIE
+#define LPTIM_IT_ARROK LPTIM_IER_ARROKIE
+#define LPTIM_IT_CMPOK LPTIM_IER_CMPOKIE
+#define LPTIM_IT_EXTTRIG LPTIM_IER_EXTTRIGIE
+#define LPTIM_IT_ARRM LPTIM_IER_ARRMIE
+#define LPTIM_IT_CMPM LPTIM_IER_CMPMIE
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Option Register Definition
+ * @{
+ */
+#define LPTIM_OP_PAD_AF ((uint32_t)0x00000000U)
+#define LPTIM_OP_PAD_PA4 LPTIM_OR_OR_0
+#define LPTIM_OP_PAD_PB9 LPTIM_OR_OR_1
+#define LPTIM_OP_TIM_DAC LPTIM_OR_OR
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset LPTIM handle state
+ * @param __HANDLE__: LPTIM handle
+ * @retval None
+ */
+#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)
+
+/**
+ * @brief Enable/Disable the LPTIM peripheral.
+ * @param __HANDLE__: LPTIM handle
+ * @retval None
+ */
+#define __HAL_LPTIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE))
+#define __HAL_LPTIM_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(LPTIM_CR_ENABLE))
+
+/**
+ * @brief Starts the LPTIM peripheral in Continuous or in single mode.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_CNTSTRT)
+#define __HAL_LPTIM_START_SINGLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_SNGSTRT)
+
+
+/**
+ * @brief Writes the passed parameter in the Autoreload register.
+ * @param __HANDLE__: LPTIM handle
+ * @param __VALUE__ : Autoreload value
+ * @retval None
+ */
+#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__))
+
+/**
+ * @brief Writes the passed parameter in the Compare register.
+ * @param __HANDLE__: LPTIM handle
+ * @param __VALUE__ : Compare value
+ * @retval None
+ */
+#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->CMP = (__VALUE__))
+
+/**
+ * @brief Checks whether the specified LPTIM flag is set or not.
+ * @param __HANDLE__: LPTIM handle
+ * @param __FLAG__ : LPTIM flag to check
+ * This parameter can be a value of:
+ * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
+ * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
+ * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
+ * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
+ * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+ * @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
+ * @arg LPTIM_FLAG_CMPM : Compare match Flag.
+ * @retval The state of the specified flag (SET or RESET).
+ */
+#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the specified LPTIM flag.
+ * @param __HANDLE__: LPTIM handle.
+ * @param __FLAG__ : LPTIM flag to clear.
+ * This parameter can be a value of:
+ * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
+ * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
+ * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
+ * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
+ * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+ * @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
+ * @arg LPTIM_FLAG_CMPM : Compare match Flag.
+ * @retval None.
+ */
+#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable the specified LPTIM interrupt.
+ * @param __HANDLE__ : LPTIM handle.
+ * @param __INTERRUPT__ : LPTIM interrupt to set.
+ * This parameter can be a value of:
+ * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
+ * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
+ * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
+ * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
+ * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+ * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
+ * @arg LPTIM_IT_CMPM : Compare match Interrupt.
+ * @retval None.
+ */
+#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+ /**
+ * @brief Disable the specified LPTIM interrupt.
+ * @param __HANDLE__ : LPTIM handle.
+ * @param __INTERRUPT__ : LPTIM interrupt to set.
+ * This parameter can be a value of:
+ * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
+ * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
+ * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
+ * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
+ * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+ * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
+ * @arg LPTIM_IT_CMPM : Compare match Interrupt.
+ * @retval None.
+ */
+#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+ /**
+ * @brief Checks whether the specified LPTIM interrupt is set or not.
+ * @param __HANDLE__ : LPTIM handle.
+ * @param __INTERRUPT__ : LPTIM interrupt to check.
+ * This parameter can be a value of:
+ * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
+ * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
+ * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
+ * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
+ * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+ * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
+ * @arg LPTIM_IT_CMPM : Compare match Interrupt.
+ * @retval Interrupt status.
+ */
+
+#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief LPTIM Option Register
+ * @param __HANDLE__: LPTIM handle
+ * @param __VALUE__: This parameter can be a value of :
+ * @arg LPTIM_OP_PAD_AF
+ * @arg LPTIM_OP_PAD_PA4
+ * @arg LPTIM_OP_PAD_PB9
+ * @arg LPTIM_OP_TIM_DAC
+ * @retval None
+ */
+#define __HAL_LPTIM_OPTR_CONFIG(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->OR = (__VALUE__))
+
+/**
+ * @brief Enable interrupt on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable interrupt on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable event on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable event on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\
+ }while(0)
+
+/**
+ * @brief Disable rising & falling edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\
+ }while(0)
+
+/**
+ * @brief Check whether the LPTIM Wake-up Timer associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Clear the LPTIM Wake-up Timer associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);
+HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);
+
+/* MSP functions *************************************************************/
+void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim);
+
+/* Start/Stop operation functions *********************************************/
+/* ################################# PWM Mode ################################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# One Pulse Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Set once Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################### Encoder Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# Time out Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Counter Mode ###############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* Reading operation functions ************************************************/
+uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim);
+
+/* LPTIM IRQ functions *******************************************************/
+void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);
+
+/* CallBack functions ********************************************************/
+void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim);
+
+/* Peripheral State functions ************************************************/
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Types LPTIM Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Variables LPTIM Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Constants LPTIM Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Macros LPTIM Private Macros
+ * @{
+ */
+
+#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \
+ ((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC))
+
+#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_PRESCALER_DIV1 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV2 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV4 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV8 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV16 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV32 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV64 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV128))
+#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) == LPTIM_PRESCALER_DIV1)
+
+#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \
+ ((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH))
+
+#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \
+ ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS) || \
+ ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS) || \
+ ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS))
+
+#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING) || \
+ ((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \
+ ((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING))
+
+#define IS_LPTIM_TRG_SOURCE(__TRIG__) (((__TRIG__) == LPTIM_TRIGSOURCE_SOFTWARE) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_0) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_1) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_2) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_3) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_4) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_5))
+
+#define IS_LPTIM_EXT_TRG_POLARITY(__POLAR__) (((__POLAR__) == LPTIM_ACTIVEEDGE_RISING ) || \
+ ((__POLAR__) == LPTIM_ACTIVEEDGE_FALLING ) || \
+ ((__POLAR__) == LPTIM_ACTIVEEDGE_RISING_FALLING ))
+
+#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION) || \
+ ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS ) || \
+ ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS ) || \
+ ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS ))
+
+#define IS_LPTIM_UPDATE_MODE(__MODE__) (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \
+ ((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD))
+
+#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \
+ ((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL))
+
+#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__) ((__AUTORELOAD__) <= 0x0000FFFFU)
+
+#define IS_LPTIM_COMPARE(__COMPARE__) ((__COMPARE__) <= 0x0000FFFFU)
+
+#define IS_LPTIM_PERIOD(PERIOD) ((PERIOD) <= 0x0000FFFFU)
+
+#define IS_LPTIM_PULSE(PULSE) ((PULSE) <= 0x0000FFFFU)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Functions LPTIM Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LPTIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1910 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief LTDC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the LTDC peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Program the required configuration through the following parameters:
+ the LTDC timing, the horizontal and vertical polarity,
+ the pixel clock polarity, Data Enable polarity and the LTDC background color value
+ using HAL_LTDC_Init() function
+
+ (#) Program the required configuration through the following parameters:
+ the pixel format, the blending factors, input alpha value, the window size
+ and the image size using HAL_LTDC_ConfigLayer() function for foreground
+ or/and background layer.
+
+ (#) Optionally, configure and enable the CLUT using HAL_LTDC_ConfigCLUT() and
+ HAL_LTDC_EnableCLUT functions.
+
+ (#) Optionally, enable the Dither using HAL_LTDC_EnableDither().
+
+ (#) Optionally, configure and enable the Color keying using HAL_LTDC_ConfigColorKeying()
+ and HAL_LTDC_EnableColorKeying functions.
+
+ (#) Optionally, configure LineInterrupt using HAL_LTDC_ProgramLineEvent()
+ function
+
+ (#) If needed, reconfigure and change the pixel format value, the alpha value
+ value, the window size, the window position and the layer start address
+ for foreground or/and background layer using respectively the following
+ functions: HAL_LTDC_SetPixelFormat(), HAL_LTDC_SetAlpha(), HAL_LTDC_SetWindowSize(),
+ HAL_LTDC_SetWindowPosition(), HAL_LTDC_SetAddress.
+
+ (#) Variant functions with _NoReload post fix allows to set the LTDC configuration/settings without immediate reload.
+ This is useful in case when the program requires to modify serval LTDC settings (on one or both layers)
+ then applying(reload) these settings in one shot by calling the function HAL_LTDC_Relaod
+
+ After calling the _NoReload functions to set different color/format/layer settings,
+ the program can call the function HAL_LTDC_Relaod To apply(Reload) these settings.
+ Function HAL_LTDC_Relaod can be called with the parameter ReloadType
+ set to LTDC_RELOAD_IMMEDIATE if an immediate reload is required.
+ Function HAL_LTDC_Relaod can be called with the parameter ReloadType
+ set to LTDC_RELOAD_VERTICAL_BLANKING if the reload should be done in the next vertical blanking period,
+ this option allows to avoid display flicker by applying the new settings during the vertical blanking period.
+
+
+ (#) To control LTDC state you can use the following function: HAL_LTDC_GetState()
+
+ *** LTDC HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in LTDC HAL driver.
+
+ (+) __HAL_LTDC_ENABLE: Enable the LTDC.
+ (+) __HAL_LTDC_DISABLE: Disable the LTDC.
+ (+) __HAL_LTDC_LAYER_ENABLE: Enable the LTDC Layer.
+ (+) __HAL_LTDC_LAYER_DISABLE: Disable the LTDC Layer.
+ (+) __HAL_LTDC_RELOAD_CONFIG: Reload Layer Configuration.
+ (+) __HAL_LTDC_GET_FLAG: Get the LTDC pending flags.
+ (+) __HAL_LTDC_CLEAR_FLAG: Clear the LTDC pending flags.
+ (+) __HAL_LTDC_ENABLE_IT: Enable the specified LTDC interrupts.
+ (+) __HAL_LTDC_DISABLE_IT: Disable the specified LTDC interrupts.
+ (+) __HAL_LTDC_GET_IT_SOURCE: Check whether the specified LTDC interrupt has occurred or not.
+
+ [..]
+ (@) You can refer to the LTDC HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup LTDC LTDC
+ * @brief LTDC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+
+#if defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup LTDC_Exported_Functions LTDC Exported Functions
+ * @{
+ */
+
+/** @defgroup LTDC_Exported_Functions_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the LTDC
+ (+) De-initialize the LTDC
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the LTDC according to the specified
+ * parameters in the LTDC_InitTypeDef and create the associated handle.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc)
+{
+ uint32_t tmp = 0U, tmp1 = 0U;
+
+ /* Check the LTDC peripheral state */
+ if(hltdc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check function parameters */
+ assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance));
+ assert_param(IS_LTDC_HSYNC(hltdc->Init.HorizontalSync));
+ assert_param(IS_LTDC_VSYNC(hltdc->Init.VerticalSync));
+ assert_param(IS_LTDC_AHBP(hltdc->Init.AccumulatedHBP));
+ assert_param(IS_LTDC_AVBP(hltdc->Init.AccumulatedVBP));
+ assert_param(IS_LTDC_AAH(hltdc->Init.AccumulatedActiveH));
+ assert_param(IS_LTDC_AAW(hltdc->Init.AccumulatedActiveW));
+ assert_param(IS_LTDC_TOTALH(hltdc->Init.TotalHeigh));
+ assert_param(IS_LTDC_TOTALW(hltdc->Init.TotalWidth));
+ assert_param(IS_LTDC_HSPOL(hltdc->Init.HSPolarity));
+ assert_param(IS_LTDC_VSPOL(hltdc->Init.VSPolarity));
+ assert_param(IS_LTDC_DEPOL(hltdc->Init.DEPolarity));
+ assert_param(IS_LTDC_PCPOL(hltdc->Init.PCPolarity));
+
+ if(hltdc->State == HAL_LTDC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hltdc->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_LTDC_MspInit(hltdc);
+ }
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Configures the HS, VS, DE and PC polarity */
+ hltdc->Instance->GCR &= ~(LTDC_GCR_HSPOL | LTDC_GCR_VSPOL | LTDC_GCR_DEPOL | LTDC_GCR_PCPOL);
+ hltdc->Instance->GCR |= (uint32_t)(hltdc->Init.HSPolarity | hltdc->Init.VSPolarity | \
+ hltdc->Init.DEPolarity | hltdc->Init.PCPolarity);
+
+ /* Sets Synchronization size */
+ hltdc->Instance->SSCR &= ~(LTDC_SSCR_VSH | LTDC_SSCR_HSW);
+ tmp = (hltdc->Init.HorizontalSync << 16U);
+ hltdc->Instance->SSCR |= (tmp | hltdc->Init.VerticalSync);
+
+ /* Sets Accumulated Back porch */
+ hltdc->Instance->BPCR &= ~(LTDC_BPCR_AVBP | LTDC_BPCR_AHBP);
+ tmp = (hltdc->Init.AccumulatedHBP << 16U);
+ hltdc->Instance->BPCR |= (tmp | hltdc->Init.AccumulatedVBP);
+
+ /* Sets Accumulated Active Width */
+ hltdc->Instance->AWCR &= ~(LTDC_AWCR_AAH | LTDC_AWCR_AAW);
+ tmp = (hltdc->Init.AccumulatedActiveW << 16U);
+ hltdc->Instance->AWCR |= (tmp | hltdc->Init.AccumulatedActiveH);
+
+ /* Sets Total Width */
+ hltdc->Instance->TWCR &= ~(LTDC_TWCR_TOTALH | LTDC_TWCR_TOTALW);
+ tmp = (hltdc->Init.TotalWidth << 16U);
+ hltdc->Instance->TWCR |= (tmp | hltdc->Init.TotalHeigh);
+
+ /* Sets the background color value */
+ tmp = ((uint32_t)(hltdc->Init.Backcolor.Green) << 8U);
+ tmp1 = ((uint32_t)(hltdc->Init.Backcolor.Red) << 16U);
+ hltdc->Instance->BCCR &= ~(LTDC_BCCR_BCBLUE | LTDC_BCCR_BCGREEN | LTDC_BCCR_BCRED);
+ hltdc->Instance->BCCR |= (tmp1 | tmp | hltdc->Init.Backcolor.Blue);
+
+ /* Enable the transfer Error interrupt */
+ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_TE);
+
+ /* Enable the FIFO underrun interrupt */
+ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_FU);
+
+ /* Enable LTDC by setting LTDCEN bit */
+ __HAL_LTDC_ENABLE(hltdc);
+
+ /* Initialize the error code */
+ hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;
+
+ /* Initialize the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the LTDC peripheral registers to their default reset
+ * values.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc)
+{
+ /* DeInit the low level hardware */
+ HAL_LTDC_MspDeInit(hltdc);
+
+ /* Initialize the error code */
+ hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;
+
+ /* Initialize the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the LTDC MSP.
+ * @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the LTDC MSP.
+ * @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides function allowing to:
+ (+) Handle LTDC interrupt request
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Handles LTDC interrupt request.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL status
+ */
+void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc)
+{
+ /* Transfer Error Interrupt management ***************************************/
+ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_TE) != RESET)
+ {
+ if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_TE) != RESET)
+ {
+ /* Disable the transfer Error interrupt */
+ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE);
+
+ /* Clear the transfer error flag */
+ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_TE);
+
+ /* Update error code */
+ hltdc->ErrorCode |= HAL_LTDC_ERROR_TE;
+
+ /* Change LTDC state */
+ hltdc->State = HAL_LTDC_STATE_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ /* Transfer error Callback */
+ HAL_LTDC_ErrorCallback(hltdc);
+ }
+ }
+ /* FIFO underrun Interrupt management ***************************************/
+ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_FU) != RESET)
+ {
+ if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_FU) != RESET)
+ {
+ /* Disable the FIFO underrun interrupt */
+ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU);
+
+ /* Clear the FIFO underrun flag */
+ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_FU);
+
+ /* Update error code */
+ hltdc->ErrorCode |= HAL_LTDC_ERROR_FU;
+
+ /* Change LTDC state */
+ hltdc->State = HAL_LTDC_STATE_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ /* Transfer error Callback */
+ HAL_LTDC_ErrorCallback(hltdc);
+ }
+ }
+ /* Line Interrupt management ************************************************/
+ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_LI) != RESET)
+ {
+ if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_LI) != RESET)
+ {
+ /* Disable the Line interrupt */
+ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI);
+
+ /* Clear the Line interrupt flag */
+ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_LI);
+
+ /* Change LTDC state */
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ /* Line interrupt Callback */
+ HAL_LTDC_LineEventCallback(hltdc);
+ }
+ }
+ /* Register reload Interrupt management ***************************************/
+ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_RR) != RESET)
+ {
+ if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_RR) != RESET)
+ {
+ /* Disable the register reload interrupt */
+ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_RR);
+
+ /* Clear the register reload flag */
+ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_RR);
+
+ /* Change LTDC state */
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ /* Register reload interrupt Callback */
+ HAL_LTDC_ReloadEventCallback(hltdc);
+ }
+ }
+}
+
+/**
+ * @brief Error LTDC callback.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Line Event callback.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_LineEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Reload Event callback.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_ReloadEvenCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the LTDC foreground or/and background parameters.
+ (+) Set the active layer.
+ (+) Configure the color keying.
+ (+) Configure the C-LUT.
+ (+) Enable / Disable the color keying.
+ (+) Enable / Disable the C-LUT.
+ (+) Update the layer position.
+ (+) Update the layer size.
+ (+) Update pixel format on the fly.
+ (+) Update transparency on the fly.
+ (+) Update address on the fly.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the LTDC Layer according to the specified
+ * parameters in the LTDC_InitTypeDef and create the associated handle.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param pLayerCfg: pointer to a LTDC_LayerCfgTypeDef structure that contains
+ * the configuration information for the Layer.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat));
+ assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1));
+ assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+ assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0));
+ assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth));
+ assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight));
+
+ /* Copy new layer configuration into handle structure */
+ hltdc->LayerCfg[LayerIdx] = *pLayerCfg;
+
+ /* Configure the LTDC Layer */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Initialize the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the color keying.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param RGBValue: the color key value
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Configures the default color values */
+ LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED);
+ LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Load the color lookup table.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param pCLUT: pointer to the color lookup table address.
+ * @param CLUTSize: the color lookup table size.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx)
+{
+ uint32_t tmp = 0U;
+ uint32_t counter = 0U;
+ uint32_t pcounter = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ for(counter = 0U; (counter < CLUTSize); counter++)
+ {
+ if(hltdc->LayerCfg[LayerIdx].PixelFormat == LTDC_PIXEL_FORMAT_AL44)
+ {
+ tmp = (((counter + 16U*counter) << 24U) | ((uint32_t)(*pCLUT) & 0xFFU) | ((uint32_t)(*pCLUT) & 0xFF00U) | ((uint32_t)(*pCLUT) & 0xFF0000U));
+ }
+ else
+ {
+ tmp = ((counter << 24U) | ((uint32_t)(*pCLUT) & 0xFFU) | ((uint32_t)(*pCLUT) & 0xFF00U) | ((uint32_t)(*pCLUT) & 0xFF0000U));
+ }
+ pcounter = (uint32_t)pCLUT + sizeof(*pCLUT);
+ pCLUT = (uint32_t *)pcounter;
+
+ /* Specifies the C-LUT address and RGB value */
+ LTDC_LAYER(hltdc, LayerIdx)->CLUTWR = tmp;
+ }
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the color keying.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Enable LTDC color keying by setting COLKEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the color keying.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color keying by setting COLKEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the color lookup table.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color lookup table by setting CLUTEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the color lookup table.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color lookup table by setting CLUTEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables Dither.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Enable Dither by setting DTEN bit */
+ LTDC->GCR |= (uint32_t)LTDC_GCR_DTEN;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables Dither.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Disable Dither by setting DTEN bit */
+ LTDC->GCR &= ~(uint32_t)LTDC_GCR_DTEN;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the LTDC window size.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param XSize: LTDC Pixel per line
+ * @param YSize: LTDC Line number
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Check the parameters (Layers parameters)*/
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+ assert_param(IS_LTDC_CFBLL(XSize));
+ assert_param(IS_LTDC_CFBLNBR(YSize));
+
+ /* update horizontal start/stop */
+ pLayerCfg->WindowX0 = 0U;
+ pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0;
+
+ /* update vertical start/stop */
+ pLayerCfg->WindowY0 = 0U;
+ pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0;
+
+ /* Reconfigures the color frame buffer pitch in byte */
+ pLayerCfg->ImageWidth = XSize;
+
+ /* Reconfigures the frame buffer line number */
+ pLayerCfg->ImageHeight = YSize;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the LTDC window position.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param X0: LTDC window X offset
+ * @param Y0: LTDC window Y offset
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+
+ /* update horizontal start/stop */
+ pLayerCfg->WindowX0 = X0;
+ pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth;
+
+ /* update vertical start/stop */
+ pLayerCfg->WindowY0 = Y0;
+ pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the pixel format.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Pixelformat: new pixel format value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the pixel format */
+ pLayerCfg->PixelFormat = Pixelformat;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the layer alpha value.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Alpha: new alpha value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_ALPHA(Alpha));
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the Alpha value */
+ pLayerCfg->Alpha = Alpha;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+/**
+ * @brief Reconfigure the frame buffer Address.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Address: new address value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the Address */
+ pLayerCfg->FBStartAdress = Address;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width that is
+ * larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to layer for which we
+ * want to read and display on screen only a portion 320x240 taken in the center of the buffer. The pitch in pixels
+ * will be in that case 800 pixels and not 320 pixels as initially configured by previous call to HAL_LTDC_ConfigLayer().
+ * Note : this function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default pitch
+ * configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above).
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LinePitchInPixels: New line pitch in pixels to configure for LTDC layer 'LayerIdx'.
+ * @param LayerIdx: LTDC layer index concerned by the modification of line pitch.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx)
+{
+ uint32_t tmp = 0U;
+ uint32_t pitchUpdate = 0U;
+ uint32_t pixelFormat = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* get LayerIdx used pixel format */
+ pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat;
+
+ if(pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
+ {
+ tmp = 4U;
+ }
+ else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888)
+ {
+ tmp = 3U;
+ }
+ else if((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_AL88))
+ {
+ tmp = 2U;
+ }
+ else
+ {
+ tmp = 1U;
+ }
+
+ pitchUpdate = ((LinePitchInPixels * tmp) << 16U);
+
+ /* Clear previously set standard pitch */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP;
+
+ /* Sets the Reload type as immediate update of LTDC pitch configured above */
+ LTDC->SRCR |= LTDC_SRCR_IMR;
+
+ /* Set new line pitch value */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate;
+
+ /* Sets the Reload type as immediate update of LTDC pitch configured above */
+ LTDC->SRCR |= LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Define the position of the line interrupt .
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Line: Line Interrupt Position.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LIPOS(Line));
+
+ /* Enable the Line interrupt */
+ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_LI);
+
+ /* Sets the Line Interrupt position */
+ LTDC->LIPCR = (uint32_t)Line;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief LTDC configuration relaod .
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param ReloadType: This parameter can be one of the following values :
+ * LTDC_RELOAD_IMMEDIATE : Immediate Reload
+ * LTDC_SRCR_VBR : Reload in the next Vertical Blanking
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_Relaod(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType)
+{
+ assert_param(IS_LTDC_RELAOD(ReloadType));
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Enable the Reload interrupt */
+ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_RR);
+
+ /* Apply Reload type */
+ hltdc->Instance->SRCR = ReloadType;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the LTDC Layer according to the specified without reloading
+ * parameters in the LTDC_InitTypeDef and create the associated handle.
+ * Variant of the function HAL_LTDC_ConfigLayer without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param pLayerCfg: pointer to a LTDC_LayerCfgTypeDef structure that contains
+ * the configuration information for the Layer.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat));
+ assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1));
+ assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+ assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0));
+ assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth));
+ assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight));
+
+ /* Copy new layer configuration into handle structure */
+ hltdc->LayerCfg[LayerIdx] = *pLayerCfg;
+
+ /* Configure the LTDC Layer */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Initialize the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the LTDC window size without reloading.
+ * Variant of the function HAL_LTDC_SetWindowSize without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param XSize: LTDC Pixel per line
+ * @param YSize: LTDC Line number
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Check the parameters (Layers parameters)*/
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+ assert_param(IS_LTDC_CFBLL(XSize));
+ assert_param(IS_LTDC_CFBLNBR(YSize));
+
+ /* update horizontal start/stop */
+ pLayerCfg->WindowX0 = 0;
+ pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0;
+
+ /* update vertical start/stop */
+ pLayerCfg->WindowY0 = 0;
+ pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0;
+
+ /* Reconfigures the color frame buffer pitch in byte */
+ pLayerCfg->ImageWidth = XSize;
+
+ /* Reconfigures the frame buffer line number */
+ pLayerCfg->ImageHeight = YSize;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the LTDC window position without reloading.
+ * Variant of the function HAL_LTDC_SetWindowPosition without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param X0: LTDC window X offset
+ * @param Y0: LTDC window Y offset
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+
+ /* update horizontal start/stop */
+ pLayerCfg->WindowX0 = X0;
+ pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth;
+
+ /* update vertical start/stop */
+ pLayerCfg->WindowY0 = Y0;
+ pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the pixel format without reloading.
+ * Variant of the function HAL_LTDC_SetPixelFormat without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDfef structure that contains
+ * the configuration information for the LTDC.
+ * @param Pixelformat: new pixel format value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the pixel format */
+ pLayerCfg->PixelFormat = Pixelformat;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the layer alpha value without reloading.
+ * Variant of the function HAL_LTDC_SetAlpha without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Alpha: new alpha value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_ALPHA(Alpha));
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the Alpha value */
+ pLayerCfg->Alpha = Alpha;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the frame buffer Address without reloading.
+ * Variant of the function HAL_LTDC_SetAddress without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Address: new address value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the Address */
+ pLayerCfg->FBStartAdress = Address;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width that is
+ * larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to layer for which we
+ * want to read and display on screen only a portion 320x240 taken in the center of the buffer. The pitch in pixels
+ * will be in that case 800 pixels and not 320 pixels as initially configured by previous call to HAL_LTDC_ConfigLayer().
+ * Note : this function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default pitch
+ * configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above).
+ * Variant of the function HAL_LTDC_SetPitch without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LinePitchInPixels: New line pitch in pixels to configure for LTDC layer 'LayerIdx'.
+ * @param LayerIdx: LTDC layer index concerned by the modification of line pitch.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx)
+{
+ uint32_t tmp = 0;
+ uint32_t pitchUpdate = 0;
+ uint32_t pixelFormat = 0;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* get LayerIdx used pixel format */
+ pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat;
+
+ if(pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
+ {
+ tmp = 4;
+ }
+ else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888)
+ {
+ tmp = 3;
+ }
+ else if((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_AL88))
+ {
+ tmp = 2;
+ }
+ else
+ {
+ tmp = 1;
+ }
+
+ pitchUpdate = ((LinePitchInPixels * tmp) << 16);
+
+ /* Clear previously set standard pitch */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP;
+
+ /* Set new line pitch value */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Configure the color keying without reloading.
+ * Variant of the function HAL_LTDC_ConfigColorKeying without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param RGBValue: the color key value
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Configures the default color values */
+ LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED);
+ LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the color keying without reloading.
+ * Variant of the function HAL_LTDC_EnableColorKeying without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Enable LTDC color keying by setting COLKEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the color keying without reloading.
+ * Variant of the function HAL_LTDC_DisableColorKeying without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color keying by setting COLKEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the color lookup table without reloading.
+ * Variant of the function HAL_LTDC_EnableCLUT without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color lookup table by setting CLUTEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the color lookup table without reloading.
+ * Variant of the function HAL_LTDC_DisableCLUT without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color lookup table by setting CLUTEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the LTDC state.
+ (+) Get error code.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the LTDC state
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL state
+ */
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc)
+{
+ return hltdc->State;
+}
+
+/**
+* @brief Return the LTDC error code
+* @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+* @retval LTDC Error Code
+*/
+uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc)
+{
+ return hltdc->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Configures the LTDC peripheral
+ * @param hltdc : Pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param pLayerCfg: Pointer LTDC Layer Configuration structure
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values: 0 or 1
+ * @retval None
+ */
+static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{
+ uint32_t tmp = 0U;
+ uint32_t tmp1 = 0U;
+ uint32_t tmp2 = 0U;
+
+ /* Configures the horizontal start and stop position */
+ tmp = ((pLayerCfg->WindowX1 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U)) << 16U);
+ LTDC_LAYER(hltdc, LayerIdx)->WHPCR &= ~(LTDC_LxWHPCR_WHSTPOS | LTDC_LxWHPCR_WHSPPOS);
+ LTDC_LAYER(hltdc, LayerIdx)->WHPCR = ((pLayerCfg->WindowX0 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U) + 1U) | tmp);
+
+ /* Configures the vertical start and stop position */
+ tmp = ((pLayerCfg->WindowY1 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP)) << 16U);
+ LTDC_LAYER(hltdc, LayerIdx)->WVPCR &= ~(LTDC_LxWVPCR_WVSTPOS | LTDC_LxWVPCR_WVSPPOS);
+ LTDC_LAYER(hltdc, LayerIdx)->WVPCR = ((pLayerCfg->WindowY0 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP) + 1U) | tmp);
+
+ /* Specifies the pixel format */
+ LTDC_LAYER(hltdc, LayerIdx)->PFCR &= ~(LTDC_LxPFCR_PF);
+ LTDC_LAYER(hltdc, LayerIdx)->PFCR = (pLayerCfg->PixelFormat);
+
+ /* Configures the default color values */
+ tmp = ((uint32_t)(pLayerCfg->Backcolor.Green) << 8U);
+ tmp1 = ((uint32_t)(pLayerCfg->Backcolor.Red) << 16U);
+ tmp2 = (pLayerCfg->Alpha0 << 24U);
+ LTDC_LAYER(hltdc, LayerIdx)->DCCR &= ~(LTDC_LxDCCR_DCBLUE | LTDC_LxDCCR_DCGREEN | LTDC_LxDCCR_DCRED | LTDC_LxDCCR_DCALPHA);
+ LTDC_LAYER(hltdc, LayerIdx)->DCCR = (pLayerCfg->Backcolor.Blue | tmp | tmp1 | tmp2);
+
+ /* Specifies the constant alpha value */
+ LTDC_LAYER(hltdc, LayerIdx)->CACR &= ~(LTDC_LxCACR_CONSTA);
+ LTDC_LAYER(hltdc, LayerIdx)->CACR = (pLayerCfg->Alpha);
+
+ /* Specifies the blending factors */
+ LTDC_LAYER(hltdc, LayerIdx)->BFCR &= ~(LTDC_LxBFCR_BF2 | LTDC_LxBFCR_BF1);
+ LTDC_LAYER(hltdc, LayerIdx)->BFCR = (pLayerCfg->BlendingFactor1 | pLayerCfg->BlendingFactor2);
+
+ /* Configures the color frame buffer start address */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD);
+ LTDC_LAYER(hltdc, LayerIdx)->CFBAR = (pLayerCfg->FBStartAdress);
+
+ if(pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
+ {
+ tmp = 4U;
+ }
+ else if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB888)
+ {
+ tmp = 3U;
+ }
+ else if((pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
+ (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \
+ (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_AL88))
+ {
+ tmp = 2U;
+ }
+ else
+ {
+ tmp = 1U;
+ }
+
+ /* Configures the color frame buffer pitch in byte */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~(LTDC_LxCFBLR_CFBLL | LTDC_LxCFBLR_CFBP);
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR = (((pLayerCfg->ImageWidth * tmp) << 16U) | (((pLayerCfg->WindowX1 - pLayerCfg->WindowX0) * tmp) + 3U));
+
+ /* Configures the frame buffer line number */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLNR &= ~(LTDC_LxCFBLNR_CFBLNBR);
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLNR = (pLayerCfg->ImageHeight);
+
+ /* Enable LTDC_Layer by setting LEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_LEN;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_LTDC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,660 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of LTDC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LTDC_H
+#define __STM32F4xx_HAL_LTDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup LTDC LTDC
+ * @brief LTDC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Types LTDC Exported Types
+ * @{
+ */
+#define MAX_LAYER 2
+
+/**
+ * @brief LTDC color structure definition
+ */
+typedef struct
+{
+ uint8_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Reserved; /*!< Reserved 0xFF */
+} LTDC_ColorTypeDef;
+
+/**
+ * @brief LTDC Init structure definition
+ */
+typedef struct
+{
+ uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity.
+ This parameter can be one value of @ref LTDC_HS_POLARITY */
+
+ uint32_t VSPolarity; /*!< configures the vertical synchronization polarity.
+ This parameter can be one value of @ref LTDC_VS_POLARITY */
+
+ uint32_t DEPolarity; /*!< configures the data enable polarity.
+ This parameter can be one of value of @ref LTDC_DE_POLARITY */
+
+ uint32_t PCPolarity; /*!< configures the pixel clock polarity.
+ This parameter can be one of value of @ref LTDC_PC_POLARITY */
+
+ uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t VerticalSync; /*!< configures the number of Vertical synchronization height.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width.
+ This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch height.
+ This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedActiveW; /*!< configures the accumulated active width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedActiveH; /*!< configures the accumulated active height.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
+
+ uint32_t TotalWidth; /*!< configures the total width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
+
+ uint32_t TotalHeigh; /*!< configures the total height.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */
+} LTDC_InitTypeDef;
+
+/**
+ * @brief LTDC Layer structure definition
+ */
+typedef struct
+{
+ uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowY0; /*!< Configures the Window vertical Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ uint32_t WindowY1; /*!< Configures the Window vertical Stop Position.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x7FF. */
+
+ uint32_t PixelFormat; /*!< Specifies the pixel format.
+ This parameter can be one of value of @ref LTDC_Pixelformat */
+
+ uint32_t Alpha; /*!< Specifies the constant alpha used for blending.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Alpha0; /*!< Configures the default alpha value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t BlendingFactor1; /*!< Select the blending factor 1.
+ This parameter can be one of value of @ref LTDC_BlendingFactor1 */
+
+ uint32_t BlendingFactor2; /*!< Select the blending factor 2.
+ This parameter can be one of value of @ref LTDC_BlendingFactor2 */
+
+ uint32_t FBStartAdress; /*!< Configures the color frame buffer address */
+
+ uint32_t ImageWidth; /*!< Configures the color frame buffer line length.
+ This parameter must be a number between Min_Data = 0x0000U and Max_Data = 0x1FFF. */
+
+ uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */
+} LTDC_LayerCfgTypeDef;
+
+/**
+ * @brief HAL LTDC State structures definition
+ */
+typedef enum
+{
+ HAL_LTDC_STATE_RESET = 0x00U, /*!< LTDC not yet initialized or disabled */
+ HAL_LTDC_STATE_READY = 0x01U, /*!< LTDC initialized and ready for use */
+ HAL_LTDC_STATE_BUSY = 0x02U, /*!< LTDC internal process is ongoing */
+ HAL_LTDC_STATE_TIMEOUT = 0x03U, /*!< LTDC Timeout state */
+ HAL_LTDC_STATE_ERROR = 0x04U /*!< LTDC state error */
+}HAL_LTDC_StateTypeDef;
+
+/**
+ * @brief LTDC handle Structure definition
+ */
+typedef struct
+{
+ LTDC_TypeDef *Instance; /*!< LTDC Register base address */
+
+ LTDC_InitTypeDef Init; /*!< LTDC parameters */
+
+ LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< LTDC Lock */
+
+ __IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */
+
+ __IO uint32_t ErrorCode; /*!< LTDC Error code */
+
+} LTDC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Constants LTDC Exported Constants
+ * @{
+ */
+
+/** @defgroup LTDC_Error_Code LTDC Error Code
+ * @{
+ */
+#define HAL_LTDC_ERROR_NONE ((uint32_t)0x00000000U) /*!< LTDC No error */
+#define HAL_LTDC_ERROR_TE ((uint32_t)0x00000001U) /*!< LTDC Transfer error */
+#define HAL_LTDC_ERROR_FU ((uint32_t)0x00000002U) /*!< LTDC FIFO Underrun */
+#define HAL_LTDC_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< LTDC Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY
+ * @{
+ */
+#define LTDC_HSPOLARITY_AL ((uint32_t)0x00000000U) /*!< Horizontal Synchronization is active low. */
+#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY
+ * @{
+ */
+#define LTDC_VSPOLARITY_AL ((uint32_t)0x00000000U) /*!< Vertical Synchronization is active low. */
+#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY
+ * @{
+ */
+#define LTDC_DEPOLARITY_AL ((uint32_t)0x00000000U) /*!< Data Enable, is active low. */
+#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY
+ * @{
+ */
+#define LTDC_PCPOLARITY_IPC ((uint32_t)0x00000000U) /*!< input pixel clock. */
+#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_SYNC LTDC SYNC
+ * @{
+ */
+#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16U) /*!< Horizontal synchronization width. */
+#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization height. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR
+ * @{
+ */
+#define LTDC_COLOR ((uint32_t)0x000000FFU) /*!< Color mask */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR1_CA ((uint32_t)0x00000400U) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR1_PAxCA ((uint32_t)0x00000600U) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR2_CA ((uint32_t)0x00000005U) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR2_PAxCA ((uint32_t)0x00000007U) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Pixelformat LTDC Pixel format
+ * @{
+ */
+#define LTDC_PIXEL_FORMAT_ARGB8888 ((uint32_t)0x00000000U) /*!< ARGB8888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB888 ((uint32_t)0x00000001U) /*!< RGB888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB565 ((uint32_t)0x00000002U) /*!< RGB565 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB1555 ((uint32_t)0x00000003U) /*!< ARGB1555 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB4444 ((uint32_t)0x00000004U) /*!< ARGB4444 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_L8 ((uint32_t)0x00000005U) /*!< L8 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL44 ((uint32_t)0x00000006U) /*!< AL44 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL88 ((uint32_t)0x00000007U) /*!< AL88 LTDC pixel format */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Alpha LTDC Alpha
+ * @{
+ */
+#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Cte Alpha mask */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_LAYER_Config LTDC LAYER Config
+ * @{
+ */
+#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16U) /*!< LTDC Layer stop position */
+#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */
+
+#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */
+#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Interrupts LTDC Interrupts
+ * @{
+ */
+#define LTDC_IT_LI LTDC_IER_LIE
+#define LTDC_IT_FU LTDC_IER_FUIE
+#define LTDC_IT_TE LTDC_IER_TERRIE
+#define LTDC_IT_RR LTDC_IER_RRIE
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Flag LTDC Flag
+ * @{
+ */
+#define LTDC_FLAG_LI LTDC_ISR_LIF
+#define LTDC_FLAG_FU LTDC_ISR_FUIF
+#define LTDC_FLAG_TE LTDC_ISR_TERRIF
+#define LTDC_FLAG_RR LTDC_ISR_RRIF
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Reload_Type LTDC Reload Type
+ * @{
+ */
+#define LTDC_RELOAD_IMMEDIATE LTDC_SRCR_IMR /*!< Immediate Reload */
+#define LTDC_RELOAD_VERTICAL_BLANKING LTDC_SRCR_VBR /*!< Vertical Blanking Reload */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Macros LTDC Exported Macros
+ * @{
+ */
+
+/** @brief Reset LTDC handle state
+ * @param __HANDLE__: specifies the LTDC handle.
+ * @retval None
+ */
+#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
+
+/**
+ * @brief Enable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
+
+/**
+ * @brief Disable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
+
+/**
+ * @brief Enable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be enabled
+ * This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Disable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be disabled
+ * This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Reload Layer Configuration.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified LTDC interrupt has occurred or not.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval The state of INTERRUPT (SET or RESET).
+ */
+#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Include LTDC HAL Extension module */
+#include "stm32f4xx_hal_ltdc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup LTDC_Exported_Functions
+ * @{
+ */
+/** @addtogroup LTDC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/** @addtogroup LTDC_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/** @addtogroup LTDC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_Relaod(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType);
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+
+/**
+ * @}
+ */
+
+/** @addtogroup LTDC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
+uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Types LTDC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Variables LTDC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Constants LTDC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Macros LTDC Private Macros
+ * @{
+ */
+#define LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)((uint32_t)(((uint32_t)((__HANDLE__)->Instance)) + 0x84U + (0x80U * (__LAYER__)))))
+#define IS_LTDC_LAYER(LAYER) ((LAYER) <= MAX_LAYER)
+#define IS_LTDC_HSPOL(HSPOL) (((HSPOL) == LTDC_HSPOLARITY_AL) || \
+ ((HSPOL) == LTDC_HSPOLARITY_AH))
+#define IS_LTDC_VSPOL(VSPOL) (((VSPOL) == LTDC_VSPOLARITY_AL) || \
+ ((VSPOL) == LTDC_VSPOLARITY_AH))
+#define IS_LTDC_DEPOL(DEPOL) (((DEPOL) == LTDC_DEPOLARITY_AL) || \
+ ((DEPOL) == LTDC_DEPOLARITY_AH))
+#define IS_LTDC_PCPOL(PCPOL) (((PCPOL) == LTDC_PCPOLARITY_IPC) || \
+ ((PCPOL) == LTDC_PCPOLARITY_IIPC))
+#define IS_LTDC_HSYNC(HSYNC) ((HSYNC) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_VSYNC(VSYNC) ((VSYNC) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AHBP(AHBP) ((AHBP) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AVBP(AVBP) ((AVBP) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AAW(AAW) ((AAW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AAH(AAH) ((AAH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_TOTALW(TOTALW) ((TOTALW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_TOTALH(TOTALH) ((TOTALH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_BLUEVALUE(BBLUE) ((BBLUE) <= LTDC_COLOR)
+#define IS_LTDC_GREENVALUE(BGREEN) ((BGREEN) <= LTDC_COLOR)
+#define IS_LTDC_REDVALUE(BRED) ((BRED) <= LTDC_COLOR)
+#define IS_LTDC_BLENDING_FACTOR1(BlendingFactor1) (((BlendingFactor1) == LTDC_BLENDING_FACTOR1_CA) || \
+ ((BlendingFactor1) == LTDC_BLENDING_FACTOR1_PAxCA))
+#define IS_LTDC_BLENDING_FACTOR2(BlendingFactor2) (((BlendingFactor2) == LTDC_BLENDING_FACTOR2_CA) || \
+ ((BlendingFactor2) == LTDC_BLENDING_FACTOR2_PAxCA))
+#define IS_LTDC_PIXEL_FORMAT(Pixelformat) (((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB8888) || ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB888) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB565) || ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB4444) || ((Pixelformat) == LTDC_PIXEL_FORMAT_L8) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_AL44) || ((Pixelformat) == LTDC_PIXEL_FORMAT_AL88))
+#define IS_LTDC_ALPHA(ALPHA) ((ALPHA) <= LTDC_ALPHA)
+#define IS_LTDC_HCONFIGST(HCONFIGST) ((HCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_HCONFIGSP(HCONFIGSP) ((HCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_VCONFIGST(VCONFIGST) ((VCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_VCONFIGSP(VCONFIGSP) ((VCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_CFBP(CFBP) ((CFBP) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLL(CFBLL) ((CFBLL) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLNBR(CFBLNBR) ((CFBLNBR) <= LTDC_LINE_NUMBER)
+#define IS_LTDC_LIPOS(LIPOS) ((LIPOS) <= 0x7FFU)
+#define IS_LTDC_RELAOD(RELOADTYPE) (((RELOADTYPE) == LTDC_RELOAD_IMMEDIATE) || ((RELOADTYPE) == LTDC_SRCR_VBR))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Functions LTDC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LTDC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,164 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief LTDC Extension HAL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup LTDCEx LTDCEx
+ * @brief LTDC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup LTDCEx_Exported_Functions LTDC Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup LTDCEx_Exported_Functions_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the LTDC
+
+@endverbatim
+ * @{
+ */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Retrieve common parameters from DSI Video mode configuration structure
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param VidCfg: pointer to a DSI_VidCfgTypeDef structure that contains
+ * the DSI video mode configuration parameters
+ * @note The implementation of this function is taking into account the LTDC
+ * polarities inversion as described in the current LTDC specification
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_StructInitFromVideoConfig(LTDC_HandleTypeDef* hltdc, DSI_VidCfgTypeDef *VidCfg)
+{
+ /* Retrieve signal polarities from DSI */
+
+ /* The following polarities are inverted:
+ LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH
+ LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH
+ LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/
+
+ /* Note 1 : Code in line w/ Current LTDC specification */
+ hltdc->Init.DEPolarity = (VidCfg->DEPolarity == DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
+ hltdc->Init.VSPolarity = (VidCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH;
+ hltdc->Init.HSPolarity = (VidCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH;
+
+ /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
+ /* hltdc->Init.DEPolarity = VidCfg->DEPolarity << 29;
+ hltdc->Init.VSPolarity = VidCfg->VSPolarity << 29;
+ hltdc->Init.HSPolarity = VidCfg->HSPolarity << 29; */
+
+ /* Retrieve vertical timing parameters from DSI */
+ hltdc->Init.VerticalSync = VidCfg->VerticalSyncActive - 1U;
+ hltdc->Init.AccumulatedVBP = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch - 1U;
+ hltdc->Init.AccumulatedActiveH = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + VidCfg->VerticalActive - 1U;
+ hltdc->Init.TotalHeigh = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + VidCfg->VerticalActive + VidCfg->VerticalFrontPorch - 1U;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Retrieve common parameters from DSI Adapted command mode configuration structure
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param CmdCfg: pointer to a DSI_CmdCfgTypeDef structure that contains
+ * the DSI command mode configuration parameters
+ * @note The implementation of this function is taking into account the LTDC
+ * polarities inversion as described in the current LTDC specification
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef* hltdc, DSI_CmdCfgTypeDef *CmdCfg)
+{
+ /* Retrieve signal polarities from DSI */
+
+ /* The following polarities are inverted:
+ LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH
+ LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH
+ LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/
+
+ /* Note 1 : Code in line w/ Current LTDC specification */
+ hltdc->Init.DEPolarity = (CmdCfg->DEPolarity == DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
+ hltdc->Init.VSPolarity = (CmdCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH;
+ hltdc->Init.HSPolarity = (CmdCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH;
+
+ /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
+ /* hltdc->Init.DEPolarity = CmdCfg->DEPolarity << 29;
+ hltdc->Init.VSPolarity = CmdCfg->VSPolarity << 29;
+ hltdc->Init.HSPolarity = CmdCfg->HSPolarity << 29; */
+
+ return HAL_OK;
+}
+#endif /* STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DCMI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,151 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of LTDC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LTDC_EX_H
+#define __STM32F4xx_HAL_LTDC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+#include "stm32f4xx_hal_dsi.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup LTDCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup LTDCEx_Exported_Constants LTDCEx Exported Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LTDCEx_Exported_Macros LTDC Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup LTDCEx_Exported_Functions LTDC Extended Exported Functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_LTDC_StructInitFromVideoConfig(LTDC_HandleTypeDef* hltdc, DSI_VidCfgTypeDef *VidCfg);
+HAL_StatusTypeDef HAL_LTDC_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef* hltdc, DSI_CmdCfgTypeDef *CmdCfg);
+/**
+ * @}
+ */
+
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Types LTDCEx Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Variables LTDCEx Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Constants LTDCEx Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Macros LTDCEx Private Macros
+ * @{
+ */
+
+ /**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Functions LTDCEx Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LTDC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_msp_template.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_msp_template.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,119 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_msp_template.c
+ * @author MCD Application Team
+ * @version V1.4.1
+ * @date 09-October-2015
+ * @brief This file contains the HAL System and Peripheral (PPP) MSP initialization
+ * and de-initialization functions.
+ * It should be copied to the application folder and renamed into 'stm32f4xx_hal_msp.c'.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL_MSP HAL MSP
+ * @brief HAL MSP module.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_MSP_Private_Functions HAL MSP Private Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the Global MSP.
+ * @note This function is called from HAL_Init() function to perform system
+ * level initialization (GPIOs, clock, DMA, interrupt).
+ * @retval None
+ */
+void HAL_MspInit(void)
+{
+
+}
+
+/**
+ * @brief DeInitializes the Global MSP.
+ * @note This functiona is called from HAL_DeInit() function to perform system
+ * level de-initialization (GPIOs, clock, DMA, interrupt).
+ * @retval None
+ */
+void HAL_MspDeInit(void)
+{
+
+}
+
+/**
+ * @brief Initializes the PPP MSP.
+ * @note This functiona is called from HAL_PPP_Init() function to perform
+ * peripheral(PPP) system level initialization (GPIOs, clock, DMA, interrupt)
+ * @retval None
+ */
+void HAL_PPP_MspInit(void)
+{
+
+}
+
+/**
+ * @brief DeInitializes the PPP MSP.
+ * @note This functiona is called from HAL_PPP_DeInit() function to perform
+ * peripheral(PPP) system level de-initialization (GPIOs, clock, DMA, interrupt)
+ * @retval None
+ */
+void HAL_PPP_MspDeInit(void)
+{
+
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1130 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nand.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief NAND HAL module driver.
+ * This file provides a generic firmware to drive NAND memories mounted
+ * as external device.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control NAND flash memories. It uses the FMC/FSMC layer functions to interface
+ with NAND devices. This driver is used as follows:
+
+ (+) NAND flash memory configuration sequence using the function HAL_NAND_Init()
+ with control and timing parameters for both common and attribute spaces.
+
+ (+) Read NAND flash memory maker and device IDs using the function
+ HAL_NAND_Read_ID(). The read information is stored in the NAND_ID_TypeDef
+ structure declared by the function caller.
+
+ (+) Access NAND flash memory by read/write operations using the functions
+ HAL_NAND_Read_Page()/HAL_NAND_Read_SpareArea(), HAL_NAND_Write_Page()/HAL_NAND_Write_SpareArea()
+ to read/write page(s)/spare area(s). These functions use specific device
+ information (Block, page size..) predefined by the user in the HAL_NAND_Info_TypeDef
+ structure. The read/write address information is contained by the Nand_Address_Typedef
+ structure passed as parameter.
+
+ (+) Perform NAND flash Reset chip operation using the function HAL_NAND_Reset().
+
+ (+) Perform NAND flash erase block operation using the function HAL_NAND_Erase_Block().
+ The erase block address information is contained in the Nand_Address_Typedef
+ structure passed as parameter.
+
+ (+) Read the NAND flash status operation using the function HAL_NAND_Read_Status().
+
+ (+) You can also control the NAND device by calling the control APIs HAL_NAND_ECC_Enable()/
+ HAL_NAND_ECC_Disable() to respectively enable/disable the ECC code correction
+ feature or the function HAL_NAND_GetECC() to get the ECC correction code.
+
+ (+) You can monitor the NAND device HAL state by calling the function
+ HAL_NAND_GetState()
+
+ [..]
+ (@) This driver is a set of generic APIs which handle standard NAND flash operations.
+ If a NAND flash device contains different operations and/or implementations,
+ it should be implemented separately.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+
+#ifdef HAL_NAND_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @defgroup NAND NAND
+ * @brief NAND HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup NAND_Private_Constants NAND Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup NAND_Private_Macros NAND Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup NAND_Exported_Functions NAND Exported Functions
+ * @{
+ */
+
+/** @defgroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NAND Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize
+ the NAND memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Perform NAND memory Initialization sequence
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param ComSpace_Timing: pointer to Common space timing structure
+ * @param AttSpace_Timing: pointer to Attribute space timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing)
+{
+ /* Check the NAND handle state */
+ if(hnand == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hnand->State == HAL_NAND_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hnand->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_NAND_MspInit(hnand);
+ }
+
+ /* Initialize NAND control Interface */
+ FMC_NAND_Init(hnand->Instance, &(hnand->Init));
+
+ /* Initialize NAND common space timing Interface */
+ FMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank);
+
+ /* Initialize NAND attribute space timing Interface */
+ FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank);
+
+ /* Enable the NAND device */
+ __FMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank);
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Perform NAND memory De-Initialization sequence
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand)
+{
+ /* Initialize the low level hardware (MSP) */
+ HAL_NAND_MspDeInit(hnand);
+
+ /* Configure the NAND registers with their reset values */
+ FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank);
+
+ /* Reset the NAND controller state */
+ hnand->State = HAL_NAND_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NAND MSP Init
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval None
+ */
+__weak void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnand);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NAND_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief NAND MSP DeInit
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval None
+ */
+__weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnand);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NAND_MspDeInit could be implemented in the user file
+ */
+}
+
+
+/**
+ * @brief This function handles NAND device interrupt request.
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+*/
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand)
+{
+ /* Check NAND interrupt Rising edge flag */
+ if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE))
+ {
+ /* NAND interrupt callback*/
+ HAL_NAND_ITCallback(hnand);
+
+ /* Clear NAND interrupt Rising edge pending bit */
+ __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE);
+ }
+
+ /* Check NAND interrupt Level flag */
+ if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL))
+ {
+ /* NAND interrupt callback*/
+ HAL_NAND_ITCallback(hnand);
+
+ /* Clear NAND interrupt Level pending bit */
+ __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL);
+ }
+
+ /* Check NAND interrupt Falling edge flag */
+ if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE))
+ {
+ /* NAND interrupt callback*/
+ HAL_NAND_ITCallback(hnand);
+
+ /* Clear NAND interrupt Falling edge pending bit */
+ __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE);
+ }
+
+ /* Check NAND interrupt FIFO empty flag */
+ if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT))
+ {
+ /* NAND interrupt callback*/
+ HAL_NAND_ITCallback(hnand);
+
+ /* Clear NAND interrupt FIFO empty pending bit */
+ __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT);
+ }
+
+}
+
+/**
+ * @brief NAND interrupt feature callback
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval None
+ */
+__weak void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnand);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NAND_ITCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NAND_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NAND Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the NAND
+ memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read the NAND memory electronic signature
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pNAND_ID: NAND ID structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID)
+{
+ __IO uint32_t data = 0U;
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Send Read ID command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_READID;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+
+ /* Read the electronic signature from NAND flash */
+ data = *(__IO uint32_t *)deviceaddress;
+
+ /* Return the data read */
+ pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data);
+ pNAND_ID->Device_Id = ADDR_2ND_CYCLE(data);
+ pNAND_ID->Third_Id = ADDR_3RD_CYCLE(data);
+ pNAND_ID->Fourth_Id = ADDR_4TH_CYCLE(data);
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NAND memory reset
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Send NAND reset command */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFFU;
+
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Read Page(s) from NAND memory block
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @param pBuffer : pointer to destination read buffer
+ * @param NumPageToRead : number of pages to read from block
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead)
+{
+ __IO uint32_t index = 0U;
+ uint32_t deviceaddress = 0U, size = 0U, numpagesread = 0U, addressstatus = NAND_VALID_ADDRESS;
+ NAND_AddressTypeDef nandaddress;
+ uint32_t addressoffset = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Save the content of pAddress as it will be modified */
+ nandaddress.Block = pAddress->Block;
+ nandaddress.Page = pAddress->Page;
+ nandaddress.Zone = pAddress->Zone;
+
+ /* Page(s) read loop */
+ while((NumPageToRead != 0U) && (addressstatus == NAND_VALID_ADDRESS))
+ {
+ /* update the buffer size */
+ size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpagesread);
+
+ /* Get the address offset */
+ addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+ /* Send read page command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
+
+ /* Get Data into Buffer */
+ for(; index < size; index++)
+ {
+ *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
+ }
+
+ /* Increment read pages number */
+ numpagesread++;
+
+ /* Decrement pages to read */
+ NumPageToRead--;
+
+ /* Increment the NAND address */
+ addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Write Page(s) to NAND memory block
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @param pBuffer : pointer to source buffer to write
+ * @param NumPageToWrite : number of pages to write to block
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite)
+{
+ __IO uint32_t index = 0U;
+ uint32_t tickstart = 0U;
+ uint32_t deviceaddress = 0U , size = 0U, numpageswritten = 0U, addressstatus = NAND_VALID_ADDRESS;
+ NAND_AddressTypeDef nandaddress;
+ uint32_t addressoffset = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Save the content of pAddress as it will be modified */
+ nandaddress.Block = pAddress->Block;
+ nandaddress.Page = pAddress->Page;
+ nandaddress.Zone = pAddress->Zone;
+
+ /* Page(s) write loop */
+ while((NumPageToWrite != 0U) && (addressstatus == NAND_VALID_ADDRESS))
+ {
+ /* update the buffer size */
+ size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpageswritten);
+
+ /* Get the address offset */
+ addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+ /* Send write page command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+ }
+
+ /* Write data to memory */
+ for(; index < size; index++)
+ {
+ *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Read status until NAND is ready */
+ while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+ {
+ if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Increment written pages number */
+ numpageswritten++;
+
+ /* Decrement pages to write */
+ NumPageToWrite--;
+
+ /* Increment the NAND address */
+ addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read Spare area(s) from NAND memory
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @param pBuffer: pointer to source buffer to write
+ * @param NumSpareAreaToRead: Number of spare area to read
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead)
+{
+ __IO uint32_t index = 0U;
+ uint32_t deviceaddress = 0U, size = 0U, num_spare_area_read = 0U, addressstatus = NAND_VALID_ADDRESS;
+ NAND_AddressTypeDef nandaddress;
+ uint32_t addressoffset = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Save the content of pAddress as it will be modified */
+ nandaddress.Block = pAddress->Block;
+ nandaddress.Page = pAddress->Page;
+ nandaddress.Zone = pAddress->Zone;
+
+ /* Spare area(s) read loop */
+ while((NumSpareAreaToRead != 0U) && (addressstatus == NAND_VALID_ADDRESS))
+ {
+ /* update the buffer size */
+ size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_read);
+
+ /* Get the address offset */
+ addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+ /* Send read spare area command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
+
+ /* Get Data into Buffer */
+ for(; index < size; index++)
+ {
+ *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
+ }
+
+ /* Increment read spare areas number */
+ num_spare_area_read++;
+
+ /* Decrement spare areas to read */
+ NumSpareAreaToRead--;
+
+ /* Increment the NAND address */
+ addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Write Spare area(s) to NAND memory
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @param pBuffer : pointer to source buffer to write
+ * @param NumSpareAreaTowrite : number of spare areas to write to block
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
+{
+ __IO uint32_t index = 0U;
+ uint32_t tickstart = 0U;
+ uint32_t deviceaddress = 0U, size = 0U, num_spare_area_written = 0U, addressstatus = NAND_VALID_ADDRESS;
+ NAND_AddressTypeDef nandaddress;
+ uint32_t addressoffset = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the FMC_NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Save the content of pAddress as it will be modified */
+ nandaddress.Block = pAddress->Block;
+ nandaddress.Page = pAddress->Page;
+ nandaddress.Zone = pAddress->Zone;
+
+ /* Spare area(s) write loop */
+ while((NumSpareAreaTowrite != 0U) && (addressstatus == NAND_VALID_ADDRESS))
+ {
+ /* update the buffer size */
+ size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_written);
+
+ /* Get the address offset */
+ addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+ /* Send write Spare area command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+ }
+
+ /* Write data to memory */
+ for(; index < size; index++)
+ {
+ *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Read status until NAND is ready */
+ while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+ {
+ if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Increment written spare areas number */
+ num_spare_area_written++;
+
+ /* Decrement spare areas to write */
+ NumSpareAreaTowrite--;
+
+ /* Increment the NAND address */
+ addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NAND memory Block erase
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+{
+ uint32_t deviceaddress = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Send Erase block command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1;
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Read status until NAND is ready */
+ while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+ {
+ if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NAND memory read status
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval NAND status
+ */
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand)
+{
+ uint32_t data = 0U;
+ uint32_t deviceaddress = 0U;
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Send Read status operation command */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS;
+
+ /* Read status register data */
+ data = *(__IO uint8_t *)deviceaddress;
+
+ /* Return the status */
+ if((data & NAND_ERROR) == NAND_ERROR)
+ {
+ return NAND_ERROR;
+ }
+ else if((data & NAND_READY) == NAND_READY)
+ {
+ return NAND_READY;
+ }
+
+ return NAND_BUSY;
+}
+
+/**
+ * @brief Increment the NAND memory address
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress: pointer to NAND address structure
+ * @retval The new status of the increment address operation. It can be:
+ * - NAND_VALID_ADDRESS: When the new address is valid address
+ * - NAND_INVALID_ADDRESS: When the new address is invalid address
+ */
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+{
+ uint32_t status = NAND_VALID_ADDRESS;
+
+ /* Increment page address */
+ pAddress->Page++;
+
+ /* Check NAND address is valid */
+ if(pAddress->Page == hnand->Info.BlockSize)
+ {
+ pAddress->Page = 0U;
+ pAddress->Block++;
+
+ if(pAddress->Block == hnand->Info.ZoneSize)
+ {
+ pAddress->Block = 0U;
+ pAddress->Zone++;
+
+ if(pAddress->Zone == (hnand->Info.ZoneSize/ hnand->Info.BlockNbr))
+ {
+ status = NAND_INVALID_ADDRESS;
+ }
+ }
+ }
+
+ return (status);
+}
+/**
+ * @}
+ */
+
+/** @defgroup NAND_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NAND Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the NAND interface.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Enables dynamically NAND ECC feature.
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand)
+{
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Enable ECC feature */
+ FMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank);
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand)
+{
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Disable ECC feature */
+ FMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank);
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically NAND ECC feature.
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param ECCval: pointer to ECC value
+ * @param Timeout: maximum timeout to wait
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Get NAND ECC value */
+ status = FMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout);
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NAND State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the NAND controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the NAND state
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL state
+ */
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand)
+{
+ return hnand->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,318 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nand.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of NAND HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NAND_H
+#define __STM32F4xx_HAL_NAND_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NAND
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Types NAND Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL NAND State structures definition
+ */
+typedef enum
+{
+ HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */
+ HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */
+ HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */
+ HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */
+}HAL_NAND_StateTypeDef;
+
+/**
+ * @brief NAND Memory electronic signature Structure definition
+ */
+typedef struct
+{
+ /*<! NAND memory electronic signature maker and device IDs */
+
+ uint8_t Maker_Id;
+
+ uint8_t Device_Id;
+
+ uint8_t Third_Id;
+
+ uint8_t Fourth_Id;
+}NAND_IDTypeDef;
+
+/**
+ * @brief NAND Memory address Structure definition
+ */
+typedef struct
+{
+ uint16_t Page; /*!< NAND memory Page address */
+
+ uint16_t Zone; /*!< NAND memory Zone address */
+
+ uint16_t Block; /*!< NAND memory Block address */
+
+}NAND_AddressTypeDef;
+
+/**
+ * @brief NAND Memory info Structure definition
+ */
+typedef struct
+{
+ uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in K. bytes */
+
+ uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in K. bytes */
+
+ uint32_t BlockSize; /*!< NAND memory block size number of pages */
+
+ uint32_t BlockNbr; /*!< NAND memory number of blocks */
+
+ uint32_t ZoneSize; /*!< NAND memory zone size measured in number of blocks */
+}NAND_InfoTypeDef;
+
+/**
+ * @brief NAND handle Structure definition
+ */
+typedef struct
+{
+ FMC_NAND_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NAND locking object */
+
+ __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */
+
+ NAND_InfoTypeDef Info; /*!< NAND characteristic information structure */
+}NAND_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Macros NAND Exported Macros
+ * @{
+ */
+
+/** @brief Reset NAND handle state
+ * @param __HANDLE__: specifies the NAND handle.
+ * @retval None
+ */
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NAND_Exported_Functions NAND Exported Functions
+ * @{
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
+void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions
+ * @{
+ */
+
+/* IO operation functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* NAND Control functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+/* NAND State functions *******************************************************/
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NAND_Private_Constants NAND Private Constants
+ * @{
+ */
+#define NAND_DEVICE1 ((uint32_t)0x70000000U)
+#define NAND_DEVICE2 ((uint32_t)0x80000000U)
+#define NAND_WRITE_TIMEOUT ((uint32_t)0x01000000U)
+
+#define CMD_AREA ((uint32_t)(1U<<16U)) /* A16 = CLE high */
+#define ADDR_AREA ((uint32_t)(1U<<17U)) /* A17 = ALE high */
+
+#define NAND_CMD_AREA_A ((uint8_t)0x00U)
+#define NAND_CMD_AREA_B ((uint8_t)0x01U)
+#define NAND_CMD_AREA_C ((uint8_t)0x50U)
+#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30U)
+
+#define NAND_CMD_WRITE0 ((uint8_t)0x80U)
+#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10U)
+#define NAND_CMD_ERASE0 ((uint8_t)0x60U)
+#define NAND_CMD_ERASE1 ((uint8_t)0xD0U)
+#define NAND_CMD_READID ((uint8_t)0x90U)
+#define NAND_CMD_STATUS ((uint8_t)0x70U)
+#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7AU)
+#define NAND_CMD_RESET ((uint8_t)0xFFU)
+
+/* NAND memory status */
+#define NAND_VALID_ADDRESS ((uint32_t)0x00000100U)
+#define NAND_INVALID_ADDRESS ((uint32_t)0x00000200U)
+#define NAND_TIMEOUT_ERROR ((uint32_t)0x00000400U)
+#define NAND_BUSY ((uint32_t)0x00000000U)
+#define NAND_ERROR ((uint32_t)0x00000001U)
+#define NAND_READY ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NAND_Private_Macros NAND Private Macros
+ * @{
+ */
+
+/**
+ * @brief NAND memory address computation.
+ * @param __ADDRESS__: NAND memory address.
+ * @param __HANDLE__: NAND handle.
+ * @retval NAND Raw address value
+ */
+#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
+ (((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize)))
+
+/**
+ * @brief NAND memory address cycling.
+ * @param __ADDRESS__: NAND memory address.
+ * @retval NAND address cycling value.
+ */
+#define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */
+#define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8U) /* 2nd addressing cycle */
+#define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16U) /* 3rd addressing cycle */
+#define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24U) /* 4th addressing cycle */
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NAND_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1035 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nor.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief NOR HAL module driver.
+ * This file provides a generic firmware to drive NOR memories mounted
+ * as external device.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control NOR flash memories. It uses the FMC/FSMC layer functions to interface
+ with NOR devices. This driver is used as follows:
+
+ (+) NOR flash memory configuration sequence using the function HAL_NOR_Init()
+ with control and timing parameters for both normal and extended mode.
+
+ (+) Read NOR flash memory manufacturer code and device IDs using the function
+ HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef
+ structure declared by the function caller.
+
+ (+) Access NOR flash memory by read/write data unit operations using the functions
+ HAL_NOR_Read(), HAL_NOR_Program().
+
+ (+) Perform NOR flash erase block/chip operations using the functions
+ HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip().
+
+ (+) Read the NOR flash CFI (common flash interface) IDs using the function
+ HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef
+ structure declared by the function caller.
+
+ (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/
+ HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation
+
+ (+) You can monitor the NOR device HAL state by calling the function
+ HAL_NOR_GetState()
+ [..]
+ (@) This driver is a set of generic APIs which handle standard NOR flash operations.
+ If a NOR flash device contains different operations and/or implementations,
+ it should be implemented separately.
+
+ *** NOR HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in NOR HAL driver.
+
+ (+) NOR_WRITE : NOR memory write data to specified address
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup NOR NOR
+ * @brief NOR driver modules
+ * @{
+ */
+#ifdef HAL_NOR_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup NOR_Private_Defines NOR Private Defines
+ * @{
+ */
+
+/* Constants to define address to set to write a command */
+#define NOR_CMD_ADDRESS_FIRST (uint16_t)0x0555U
+#define NOR_CMD_ADDRESS_FIRST_CFI (uint16_t)0x0055U
+#define NOR_CMD_ADDRESS_SECOND (uint16_t)0x02AAU
+#define NOR_CMD_ADDRESS_THIRD (uint16_t)0x0555U
+#define NOR_CMD_ADDRESS_FOURTH (uint16_t)0x0555U
+#define NOR_CMD_ADDRESS_FIFTH (uint16_t)0x02AAU
+#define NOR_CMD_ADDRESS_SIXTH (uint16_t)0x0555U
+
+/* Constants to define data to program a command */
+#define NOR_CMD_DATA_READ_RESET (uint16_t)0x00F0U
+#define NOR_CMD_DATA_FIRST (uint16_t)0x00AAU
+#define NOR_CMD_DATA_SECOND (uint16_t)0x0055U
+#define NOR_CMD_DATA_AUTO_SELECT (uint16_t)0x0090U
+#define NOR_CMD_DATA_PROGRAM (uint16_t)0x00A0U
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD (uint16_t)0x0080U
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH (uint16_t)0x00AAU
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH (uint16_t)0x0055U
+#define NOR_CMD_DATA_CHIP_ERASE (uint16_t)0x0010U
+#define NOR_CMD_DATA_CFI (uint16_t)0x0098U
+
+#define NOR_CMD_DATA_BUFFER_AND_PROG (uint8_t)0x25U
+#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM (uint8_t)0x29U
+#define NOR_CMD_DATA_BLOCK_ERASE (uint8_t)0x30U
+
+/* Mask on NOR STATUS REGISTER */
+#define NOR_MASK_STATUS_DQ5 (uint16_t)0x0020U
+#define NOR_MASK_STATUS_DQ6 (uint16_t)0x0040U
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Variables NOR Private Variables
+ * @{
+ */
+
+static uint32_t uwNORMemoryDataWidth = NOR_MEMORY_8B;
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup NOR_Exported_Functions NOR Exported Functions
+ * @{
+ */
+
+/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NOR Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize
+ the NOR memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Perform the NOR memory Initialization sequence
+ * @param hnor: pointer to the NOR handle
+ * @param Timing: pointer to NOR control timing structure
+ * @param ExtTiming: pointer to NOR extended mode timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{
+ /* Check the NOR handle parameter */
+ if(hnor == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hnor->State == HAL_NOR_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hnor->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_NOR_MspInit(hnor);
+ }
+
+ /* Initialize NOR control Interface */
+ FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init));
+
+ /* Initialize NOR timing Interface */
+ FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank);
+
+ /* Initialize NOR extended mode timing Interface */
+ FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
+
+ /* Enable the NORSRAM device */
+ __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);
+
+ /* Initialize NOR Memory Data Width*/
+ if (hnor->Init.MemoryDataWidth == FMC_NORSRAM_MEM_BUS_WIDTH_8)
+ {
+ uwNORMemoryDataWidth = NOR_MEMORY_8B;
+ }
+ else
+ {
+ uwNORMemoryDataWidth = NOR_MEMORY_16B;
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Perform NOR memory De-Initialization sequence
+ * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor)
+{
+ /* De-Initialize the low level hardware (MSP) */
+ HAL_NOR_MspDeInit(hnor);
+
+ /* Configure the NOR registers with their reset values */
+ FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NOR MSP Init
+ * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval None
+ */
+__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnor);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NOR_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief NOR MSP DeInit
+ * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval None
+ */
+__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnor);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NOR_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief NOR BSP Wait for Ready/Busy signal
+ * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param Timeout: Maximum timeout value
+ * @retval None
+ */
+__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnor);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NOR_BspWait could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NOR Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the NOR memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read NOR flash IDs
+ * @param hnor: pointer to the NOR handle
+ * @param pNOR_ID : pointer to NOR ID structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send read ID command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT);
+
+ /* Read the NOR IDs */
+ pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS);
+ pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE1_ADDR);
+ pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE2_ADDR);
+ pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE3_ADDR);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the NOR memory to Read mode.
+ * @param hnor: pointer to the NOR handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read data from NOR memory
+ * @param hnor: pointer to the NOR handle
+ * @param pAddress: pointer to Device address
+ * @param pData : pointer to read data
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send read data command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE((uint32_t)pAddress, NOR_CMD_DATA_READ_RESET);
+
+ /* Read the data */
+ *pData = *(__IO uint32_t *)(uint32_t)pAddress;
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Program data to NOR memory
+ * @param hnor: pointer to the NOR handle
+ * @param pAddress: Device address
+ * @param pData : pointer to the data to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send program data command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
+
+ /* Write the data */
+ NOR_WRITE(pAddress, *pData);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads a half-word buffer from the NOR memory.
+ * @param hnor: pointer to the NOR handle
+ * @param uwAddress: NOR memory internal address to read from.
+ * @param pData: pointer to the buffer that receives the data read from the
+ * NOR memory.
+ * @param uwBufferSize : number of Half word to read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send read data command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(uwAddress, 0x00F0U);
+
+ /* Read buffer */
+ while( uwBufferSize > 0U)
+ {
+ *pData++ = *(__IO uint16_t *)uwAddress;
+ uwAddress += 2U;
+ uwBufferSize--;
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes a half-word buffer to the NOR memory. This function must be used
+ only with S29GL128P NOR memory.
+ * @param hnor: pointer to the NOR handle
+ * @param uwAddress: NOR memory internal start write address
+ * @param pData: pointer to source data buffer.
+ * @param uwBufferSize: Size of the buffer to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+ uint16_t * p_currentaddress = (uint16_t *)NULL;
+ uint16_t * p_endaddress = (uint16_t *)NULL;
+ uint32_t lastloadedaddress = 0U, deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Initialize variables */
+ p_currentaddress = (uint16_t*)((uint32_t)(uwAddress));
+ p_endaddress = p_currentaddress + (uwBufferSize-1U);
+ lastloadedaddress = (uint32_t)(uwAddress);
+
+ /* Issue unlock command sequence */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+
+ /* Write Buffer Load Command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, uwAddress), (uwBufferSize - 1U));
+
+ /* Load Data into NOR Buffer */
+ while(p_currentaddress <= p_endaddress)
+ {
+ /* Store last loaded address & data value (for polling) */
+ lastloadedaddress = (uint32_t)p_currentaddress;
+
+ NOR_WRITE(p_currentaddress, *pData++);
+
+ p_currentaddress ++;
+ }
+
+ NOR_WRITE((uint32_t)(lastloadedaddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Erase the specified block of the NOR memory
+ * @param hnor: pointer to the NOR handle
+ * @param BlockAddress : Block to erase address
+ * @param Address: Device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send block erase command sequence */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+ NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE);
+
+ /* Check the NOR memory status and update the controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Erase the entire NOR chip.
+ * @param hnor: pointer to the NOR handle
+ * @param Address : Device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send NOR chip erase command sequence */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE);
+
+ /* Check the NOR memory status and update the controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read NOR flash CFI IDs
+ * @param hnor: pointer to the NOR handle
+ * @param pNOR_CFI : pointer to NOR CFI IDs structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send read CFI query command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+
+ /* read the NOR CFI information */
+ pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS);
+ pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS);
+ pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI3_ADDRESS);
+ pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI4_ADDRESS);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NOR_Exported_Functions_Group3 Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NOR Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the NOR interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically NOR write operation.
+ * @param hnor: pointer to the NOR handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor)
+{
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Enable write operation */
+ FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically NOR write operation.
+ * @param hnor: pointer to the NOR handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor)
+{
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the SRAM controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Disable write operation */
+ FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_PROTECTED;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NOR_Exported_Functions_Group4 State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NOR State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the NOR controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the NOR controller state
+ * @param hnor: pointer to the NOR handle
+ * @retval NOR controller state
+ */
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor)
+{
+ return hnor->State;
+}
+
+/**
+ * @brief Returns the NOR operation status.
+ * @param hnor: pointer to the NOR handle
+ * @param Address: Device address
+ * @param Timeout: NOR programming Timeout
+ * @retval NOR_Status: The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR
+ * or HAL_NOR_STATUS_TIMEOUT
+ */
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout)
+{
+ HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING;
+ uint16_t tmpSR1 = 0U, tmpSR2 = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Poll on NOR memory Ready/Busy signal ------------------------------------*/
+ HAL_NOR_MspWait(hnor, Timeout);
+
+ /* Get the NOR memory operation status -------------------------------------*/
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ while((status != HAL_NOR_STATUS_SUCCESS ) && (status != HAL_NOR_STATUS_TIMEOUT))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ status = HAL_NOR_STATUS_TIMEOUT;
+ }
+ }
+
+ /* Read NOR status register (DQ6 and DQ5) */
+ tmpSR1 = *(__IO uint16_t *)Address;
+ tmpSR2 = *(__IO uint16_t *)Address;
+
+ /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
+ if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
+ {
+ return HAL_NOR_STATUS_SUCCESS ;
+ }
+
+ if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+ {
+ status = HAL_NOR_STATUS_ONGOING;
+ }
+
+ tmpSR1 = *(__IO uint16_t *)Address;
+ tmpSR2 = *(__IO uint16_t *)Address;
+
+ /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
+ if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
+ {
+ return HAL_NOR_STATUS_SUCCESS;
+ }
+ if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+ {
+ return HAL_NOR_STATUS_ERROR;
+ }
+ }
+
+ /* Return the operation status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx ||\
+ STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx || STM32F412Zx || STM32F412Vx */
+#endif /* HAL_NOR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,305 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nor.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of NOR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NOR_H
+#define __STM32F4xx_HAL_NOR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NOR
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup NOR_Exported_Types NOR Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_NOR_STATE_RESET = 0x00U, /*!< NOR not yet initialized or disabled */
+ HAL_NOR_STATE_READY = 0x01U, /*!< NOR initialized and ready for use */
+ HAL_NOR_STATE_BUSY = 0x02U, /*!< NOR internal processing is ongoing */
+ HAL_NOR_STATE_ERROR = 0x03U, /*!< NOR error state */
+ HAL_NOR_STATE_PROTECTED = 0x04U /*!< NOR NORSRAM device write protected */
+}HAL_NOR_StateTypeDef;
+
+/**
+ * @brief FMC NOR Status typedef
+ */
+typedef enum
+{
+ HAL_NOR_STATUS_SUCCESS = 0U,
+ HAL_NOR_STATUS_ONGOING,
+ HAL_NOR_STATUS_ERROR,
+ HAL_NOR_STATUS_TIMEOUT
+}HAL_NOR_StatusTypeDef;
+
+/**
+ * @brief FMC NOR ID typedef
+ */
+typedef struct
+{
+ uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */
+
+ uint16_t Device_Code1;
+
+ uint16_t Device_Code2;
+
+ uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory.
+ These codes can be accessed by performing read operations with specific
+ control signals and addresses set.They can also be accessed by issuing
+ an Auto Select command */
+}NOR_IDTypeDef;
+
+/**
+ * @brief FMC NOR CFI typedef
+ */
+typedef struct
+{
+ /*!< Defines the information stored in the memory's Common flash interface
+ which contains a description of various electrical and timing parameters,
+ density information and functions supported by the memory */
+
+ uint16_t CFI_1;
+
+ uint16_t CFI_2;
+
+ uint16_t CFI_3;
+
+ uint16_t CFI_4;
+}NOR_CFITypeDef;
+
+/**
+ * @brief NOR handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NOR locking object */
+
+ __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */
+
+}NOR_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup NOR_Exported_Macros NOR Exported Macros
+ * @{
+ */
+/** @brief Reset NOR handle state
+ * @param __HANDLE__: specifies the NOR handle.
+ * @retval None
+ */
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NOR_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group3
+ * @{
+ */
+/* NOR Control functions *****************************************************/
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group4
+ * @{
+ */
+/* NOR State functions ********************************************************/
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Constants NOR Private Constants
+ * @{
+ */
+/* NOR device IDs addresses */
+#define MC_ADDRESS ((uint16_t)0x0000U)
+#define DEVICE_CODE1_ADDR ((uint16_t)0x0001U)
+#define DEVICE_CODE2_ADDR ((uint16_t)0x000EU)
+#define DEVICE_CODE3_ADDR ((uint16_t)0x000FU)
+
+/* NOR CFI IDs addresses */
+#define CFI1_ADDRESS ((uint16_t)0x0061U)
+#define CFI2_ADDRESS ((uint16_t)0x0062U)
+#define CFI3_ADDRESS ((uint16_t)0x0063U)
+#define CFI4_ADDRESS ((uint16_t)0x0064U)
+
+/* NOR operation wait timeout */
+#define NOR_TMEOUT ((uint16_t)0xFFFFU)
+
+/* NOR memory data width */
+#define NOR_MEMORY_8B ((uint8_t)0x00U)
+#define NOR_MEMORY_16B ((uint8_t)0x01U)
+
+/* NOR memory device read/write start address */
+#define NOR_MEMORY_ADRESS1 ((uint32_t)0x60000000U)
+#define NOR_MEMORY_ADRESS2 ((uint32_t)0x64000000U)
+#define NOR_MEMORY_ADRESS3 ((uint32_t)0x68000000U)
+#define NOR_MEMORY_ADRESS4 ((uint32_t)0x6C000000U)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NOR_Private_Macros NOR Private Macros
+ * @{
+ */
+/**
+ * @brief NOR memory address shifting.
+ * @param __NOR_ADDRESS__: NOR base address
+ * @param NOR_MEMORY_WIDTH: NOR memory width
+ * @param ADDRESS: NOR memory address
+ * @retval NOR shifted address value
+ */
+#define NOR_ADDR_SHIFT(__NOR_ADDRESS__, NOR_MEMORY_WIDTH, ADDRESS) (uint32_t)(((NOR_MEMORY_WIDTH) == NOR_MEMORY_16B)? ((uint32_t)((__NOR_ADDRESS__) + (2U * (ADDRESS)))):\
+ ((uint32_t)((__NOR_ADDRESS__) + (ADDRESS))))
+
+/**
+ * @brief NOR memory write data to specified address.
+ * @param ADDRESS: NOR memory address
+ * @param DATA: Data to write
+ * @retval None
+ */
+#define NOR_WRITE(ADDRESS, DATA) (*(__IO uint16_t *)((uint32_t)(ADDRESS)) = (DATA))
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NOR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,748 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pccard.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief PCCARD HAL module driver.
+ * This file provides a generic firmware to drive PCCARD memories mounted
+ * as external device.
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control PCCARD/compact flash memories. It uses the FMC/FSMC layer functions
+ to interface with PCCARD devices. This driver is used for:
+
+ (+) PCCARD/Compact Flash memory configuration sequence using the function
+ HAL_PCCARD_Init()/HAL_CF_Init() with control and timing parameters for
+ both common and attribute spaces.
+
+ (+) Read PCCARD/Compact Flash memory maker and device IDs using the function
+ HAL_PCCARD_Read_ID()/HAL_CF_Read_ID(). The read information is stored in
+ the CompactFlash_ID structure declared by the function caller.
+
+ (+) Access PCCARD/Compact Flash memory by read/write operations using the functions
+ HAL_PCCARD_Read_Sector()/ HAL_PCCARD_Write_Sector() -
+ HAL_CF_Read_Sector()/HAL_CF_Write_Sector(), to read/write sector.
+
+ (+) Perform PCCARD/Compact Flash Reset chip operation using the function
+ HAL_PCCARD_Reset()/HAL_CF_Reset.
+
+ (+) Perform PCCARD/Compact Flash erase sector operation using the function
+ HAL_PCCARD_Erase_Sector()/HAL_CF_Erase_Sector.
+
+ (+) Read the PCCARD/Compact Flash status operation using the function
+ HAL_PCCARD_ReadStatus()/HAL_CF_ReadStatus().
+
+ (+) You can monitor the PCCARD/Compact Flash device HAL state by calling
+ the function HAL_PCCARD_GetState()/HAL_CF_GetState()
+
+ [..]
+ (@) This driver is a set of generic APIs which handle standard PCCARD/compact flash
+ operations. If a PCCARD/Compact Flash device contains different operations
+ and/or implementations, it should be implemented separately.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup PCCARD PCCARD
+ * @brief PCCARD HAL module driver
+ * @{
+ */
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup PCCARD_Private_Defines PCCARD Private Defines
+ * @{
+ */
+#define PCCARD_TIMEOUT_READ_ID (uint32_t)0x0000FFFFU
+#define PCCARD_TIMEOUT_READ_WRITE_SECTOR (uint32_t)0x0000FFFFU
+#define PCCARD_TIMEOUT_ERASE_SECTOR (uint32_t)0x00000400U
+#define PCCARD_TIMEOUT_STATUS (uint32_t)0x01000000U
+
+#define PCCARD_STATUS_OK (uint8_t)0x58U
+#define PCCARD_STATUS_WRITE_OK (uint8_t)0x50U
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function ----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Functions PCCARD Exported Functions
+ * @{
+ */
+
+/** @defgroup PCCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### PCCARD Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize
+ the PCCARD memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Perform the PCCARD memory Initialization sequence
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param ComSpaceTiming: Common space timing structure
+ * @param AttSpaceTiming: Attribute space timing structure
+ * @param IOSpaceTiming: IO space timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming)
+{
+ /* Check the PCCARD controller state */
+ if(hpccard == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hpccard->State == HAL_PCCARD_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hpccard->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_PCCARD_MspInit(hpccard);
+ }
+
+ /* Initialize the PCCARD state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize PCCARD control Interface */
+ FMC_PCCARD_Init(hpccard->Instance, &(hpccard->Init));
+
+ /* Init PCCARD common space timing Interface */
+ FMC_PCCARD_CommonSpace_Timing_Init(hpccard->Instance, ComSpaceTiming);
+
+ /* Init PCCARD attribute space timing Interface */
+ FMC_PCCARD_AttributeSpace_Timing_Init(hpccard->Instance, AttSpaceTiming);
+
+ /* Init PCCARD IO space timing Interface */
+ FMC_PCCARD_IOSpace_Timing_Init(hpccard->Instance, IOSpaceTiming);
+
+ /* Enable the PCCARD device */
+ __FMC_PCCARD_ENABLE(hpccard->Instance);
+
+ /* Update the PCCARD state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Perform the PCCARD memory De-initialization sequence
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard)
+{
+ /* De-Initialize the low level hardware (MSP) */
+ HAL_PCCARD_MspDeInit(hpccard);
+
+ /* Configure the PCCARD registers with their reset values */
+ FMC_PCCARD_DeInit(hpccard->Instance);
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief PCCARD MSP Init
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval None
+ */
+__weak void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpccard);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCCARD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PCCARD MSP DeInit
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval None
+ */
+__weak void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpccard);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCCARD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCCARD_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### PCCARD Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the PCCARD memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read Compact Flash's ID.
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param CompactFlash_ID: Compact flash ID structure.
+ * @param pStatus: pointer to compact flash status
+ * @retval HAL status
+ *
+ */
+HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_READ_ID, index = 0U;
+ uint8_t status = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize the PCCARD status */
+ *pStatus = PCCARD_READY;
+
+ /* Send the Identify Command */
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = 0xECECU;
+
+ /* Read PCCARD IDs and timeout treatment */
+ do
+ {
+ /* Read the PCCARD status */
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+ timeout--;
+ }while((status != PCCARD_STATUS_OK) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+ else
+ {
+ /* Read PCCARD ID bytes */
+ for(index = 0U; index < 16U; index++)
+ {
+ CompactFlash_ID[index] = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_DATA);
+ }
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read sector from PCCARD memory
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param pBuffer: pointer to destination read buffer
+ * @param SectorAddress: Sector address to read
+ * @param pStatus: pointer to PCCARD status
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0U;
+ uint8_t status = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize PCCARD status */
+ *pStatus = PCCARD_READY;
+
+ /* Set the parameters to write a sector */
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00U;
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100U ) | ((uint16_t)SectorAddress);
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0xE4A0U;
+
+ do
+ {
+ /* wait till the Status = 0x80 */
+ status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }while((status == 0x80U) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR;
+
+ do
+ {
+ /* wait till the Status = PCCARD_STATUS_OK */
+ status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }while((status != PCCARD_STATUS_OK) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Read bytes */
+ for(; index < PCCARD_SECTOR_SIZE; index++)
+ {
+ *(uint16_t *)pBuffer++ = *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR);
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Write sector to PCCARD memory
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param pBuffer: pointer to source write buffer
+ * @param SectorAddress: Sector address to write
+ * @param pStatus: pointer to PCCARD status
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0U;
+ uint8_t status = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize PCCARD status */
+ *pStatus = PCCARD_READY;
+
+ /* Set the parameters to write a sector */
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00U;
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100U ) | ((uint16_t)SectorAddress);
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0x30A0U;
+
+ do
+ {
+ /* Wait till the Status = PCCARD_STATUS_OK */
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }while((status != PCCARD_STATUS_OK) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Write bytes */
+ for(; index < PCCARD_SECTOR_SIZE; index++)
+ {
+ *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR) = *(uint16_t *)pBuffer++;
+ }
+
+ do
+ {
+ /* Wait till the Status = PCCARD_STATUS_WRITE_OK */
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }while((status != PCCARD_STATUS_WRITE_OK) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Erase sector from PCCARD memory
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param SectorAddress: Sector address to erase
+ * @param pStatus: pointer to PCCARD status
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_ERASE_SECTOR;
+ uint8_t status = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize PCCARD status */
+ *pStatus = PCCARD_READY;
+
+ /* Set the parameters to write a sector */
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_LOW) = 0x00U;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = 0x00U;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_NUMBER) = SectorAddress;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = 0x01U;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CARD_HEAD) = 0xA0U;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = ATA_ERASE_SECTOR_CMD;
+
+ /* wait till the PCCARD is ready */
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+ while((status != PCCARD_STATUS_WRITE_OK) && timeout)
+ {
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Check the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reset the PCCARD memory
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Provide a SW reset and Read and verify the:
+ - PCCard Configuration Option Register at address 0x98000200 --> 0x80
+ - Card Configuration and Status Register at address 0x98000202 --> 0x00
+ - Pin Replacement Register at address 0x98000204 --> 0x0C
+ - Socket and Copy Register at address 0x98000206 --> 0x00
+ */
+
+ /* Check the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ *(__IO uint8_t *)(PCCARD_ATTRIBUTE_SPACE_ADDRESS | ATA_CARD_CONFIGURATION ) = 0x01U;
+
+ /* Check the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles PCCARD device interrupt request.
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval HAL status
+*/
+void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Check PCCARD interrupt Rising edge flag */
+ if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE))
+ {
+ /* PCCARD interrupt callback*/
+ HAL_PCCARD_ITCallback(hpccard);
+
+ /* Clear PCCARD interrupt Rising edge pending bit */
+ __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE);
+ }
+
+ /* Check PCCARD interrupt Level flag */
+ if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_LEVEL))
+ {
+ /* PCCARD interrupt callback*/
+ HAL_PCCARD_ITCallback(hpccard);
+
+ /* Clear PCCARD interrupt Level pending bit */
+ __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_LEVEL);
+ }
+
+ /* Check PCCARD interrupt Falling edge flag */
+ if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE))
+ {
+ /* PCCARD interrupt callback*/
+ HAL_PCCARD_ITCallback(hpccard);
+
+ /* Clear PCCARD interrupt Falling edge pending bit */
+ __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE);
+ }
+
+ /* Check PCCARD interrupt FIFO empty flag */
+ if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FEMPT))
+ {
+ /* PCCARD interrupt callback*/
+ HAL_PCCARD_ITCallback(hpccard);
+
+ /* Clear PCCARD interrupt FIFO empty pending bit */
+ __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FEMPT);
+ }
+}
+
+/**
+ * @brief PCCARD interrupt feature callback
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval None
+ */
+__weak void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpccard);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCCARD_ITCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCCARD_Exported_Functions_Group3 State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### PCCARD State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the PCCARD controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the PCCARD controller state
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval HAL state
+ */
+HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard)
+{
+ return hpccard->State;
+}
+
+/**
+ * @brief Get the compact flash memory status
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval New status of the PCCARD operation. This parameter can be:
+ * - CompactFlash_TIMEOUT_ERROR: when the previous operation generate
+ * a Timeout error
+ * - CompactFlash_READY: when memory is ready for the next operation
+ */
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_STATUS, status_pccard = 0U;
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_PCCARD_STATUS_ONGOING;
+ }
+
+ status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+ while((status_pccard == PCCARD_BUSY) && timeout)
+ {
+ status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }
+
+ if(timeout == 0U)
+ {
+ status_pccard = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Return the operation status */
+ return (HAL_PCCARD_StatusTypeDef) status_pccard;
+}
+
+/**
+ * @brief Reads the Compact Flash memory status using the Read status command
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval The status of the Compact Flash memory. This parameter can be:
+ * - CompactFlash_BUSY: when memory is busy
+ * - CompactFlash_READY: when memory is ready for the next operation
+ * - CompactFlash_ERROR: when the previous operation generates error
+ */
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard)
+{
+ uint8_t data = 0U, status_pccard = PCCARD_BUSY;
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_PCCARD_STATUS_ONGOING;
+ }
+
+ /* Read status operation */
+ data = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+ if((data & PCCARD_TIMEOUT_ERROR) == PCCARD_TIMEOUT_ERROR)
+ {
+ status_pccard = PCCARD_TIMEOUT_ERROR;
+ }
+ else if((data & PCCARD_READY) == PCCARD_READY)
+ {
+ status_pccard = PCCARD_READY;
+ }
+
+ return (HAL_PCCARD_StatusTypeDef) status_pccard;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,266 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pccard.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PCCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCCARD_H
+#define __STM32F4xx_HAL_PCCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @addtogroup PCCARD
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Types PCCARD Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL PCCARD State structures definition
+ */
+typedef enum
+{
+ HAL_PCCARD_STATE_RESET = 0x00U, /*!< PCCARD peripheral not yet initialized or disabled */
+ HAL_PCCARD_STATE_READY = 0x01U, /*!< PCCARD peripheral ready */
+ HAL_PCCARD_STATE_BUSY = 0x02U, /*!< PCCARD peripheral busy */
+ HAL_PCCARD_STATE_ERROR = 0x04U /*!< PCCARD peripheral error */
+}HAL_PCCARD_StateTypeDef;
+
+typedef enum
+{
+ HAL_PCCARD_STATUS_SUCCESS = 0U,
+ HAL_PCCARD_STATUS_ONGOING,
+ HAL_PCCARD_STATUS_ERROR,
+ HAL_PCCARD_STATUS_TIMEOUT
+}HAL_PCCARD_StatusTypeDef;
+
+/**
+ * @brief FMC_PCCARD handle Structure definition
+ */
+typedef struct
+{
+ FMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */
+
+ FMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */
+
+ __IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */
+
+ HAL_LockTypeDef Lock; /*!< PCCARD Lock */
+
+}PCCARD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Macros PCCARD Exported Macros
+ * @{
+ */
+/** @brief Reset PCCARD handle state
+ * @param __HANDLE__: specifies the PCCARD handle.
+ * @retval None
+ */
+#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCCARD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming);
+HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
+/**
+ * @}
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group3
+ * @{
+ */
+/* PCCARD State functions *******************************************************/
+HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard);
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard);
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCCARD_Private_Constants PCCARD Private Constants
+ * @{
+ */
+#define PCCARD_DEVICE_ADDRESS ((uint32_t)0x90000000U)
+#define PCCARD_ATTRIBUTE_SPACE_ADDRESS ((uint32_t)0x98000000U) /* Attribute space size to @0x9BFF FFFF */
+#define PCCARD_COMMON_SPACE_ADDRESS PCCARD_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */
+#define PCCARD_IO_SPACE_ADDRESS ((uint32_t)0x9C000000U) /* IO space size to @0x9FFF FFFF */
+#define PCCARD_IO_SPACE_PRIMARY_ADDR ((uint32_t)0x9C0001F0U) /* IO space size to @0x9FFF FFFF */
+
+/* Flash-ATA registers description */
+#define ATA_DATA ((uint8_t)0x00U) /* Data register */
+#define ATA_SECTOR_COUNT ((uint8_t)0x02U) /* Sector Count register */
+#define ATA_SECTOR_NUMBER ((uint8_t)0x03U) /* Sector Number register */
+#define ATA_CYLINDER_LOW ((uint8_t)0x04U) /* Cylinder low register */
+#define ATA_CYLINDER_HIGH ((uint8_t)0x05U) /* Cylinder high register */
+#define ATA_CARD_HEAD ((uint8_t)0x06U) /* Card/Head register */
+#define ATA_STATUS_CMD ((uint8_t)0x07U) /* Status(read)/Command(write) register */
+#define ATA_STATUS_CMD_ALTERNATE ((uint8_t)0x0EU) /* Alternate Status(read)/Command(write) register */
+#define ATA_COMMON_DATA_AREA ((uint16_t)0x0400U) /* Start of data area (for Common access only!) */
+#define ATA_CARD_CONFIGURATION ((uint16_t)0x0202U) /* Card Configuration and Status Register */
+
+/* Flash-ATA commands */
+#define ATA_READ_SECTOR_CMD ((uint8_t)0x20U)
+#define ATA_WRITE_SECTOR_CMD ((uint8_t)0x30U)
+#define ATA_ERASE_SECTOR_CMD ((uint8_t)0xC0)
+#define ATA_IDENTIFY_CMD ((uint8_t)0xEC)
+
+/* PC Card/Compact Flash status */
+#define PCCARD_TIMEOUT_ERROR ((uint8_t)0x60U)
+#define PCCARD_BUSY ((uint8_t)0x80U)
+#define PCCARD_PROGR ((uint8_t)0x01U)
+#define PCCARD_READY ((uint8_t)0x40U)
+
+#define PCCARD_SECTOR_SIZE ((uint32_t)255U) /* In half words */
+
+/**
+ * @}
+ */
+/* Compact Flash redefinition */
+#define HAL_CF_Init HAL_PCCARD_Init
+#define HAL_CF_DeInit HAL_PCCARD_DeInit
+#define HAL_CF_MspInit HAL_PCCARD_MspInit
+#define HAL_CF_MspDeInit HAL_PCCARD_MspDeInit
+
+#define HAL_CF_Read_ID HAL_PCCARD_Read_ID
+#define HAL_CF_Write_Sector HAL_PCCARD_Write_Sector
+#define HAL_CF_Read_Sector HAL_PCCARD_Read_Sector
+#define HAL_CF_Erase_Sector HAL_PCCARD_Erase_Sector
+#define HAL_CF_Reset HAL_PCCARD_Reset
+#define HAL_CF_IRQHandler HAL_PCCARD_IRQHandler
+#define HAL_CF_ITCallback HAL_PCCARD_ITCallback
+
+#define HAL_CF_GetState HAL_PCCARD_GetState
+#define HAL_CF_GetStatus HAL_PCCARD_GetStatus
+#define HAL_CF_ReadStatus HAL_PCCARD_ReadStatus
+
+#define HAL_CF_STATUS_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define HAL_CF_STATUS_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define HAL_CF_STATUS_ERROR HAL_PCCARD_STATUS_ERROR
+#define HAL_CF_STATUS_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+#define HAL_CF_StatusTypeDef HAL_PCCARD_StatusTypeDef
+
+#define CF_DEVICE_ADDRESS PCCARD_DEVICE_ADDRESS
+#define CF_ATTRIBUTE_SPACE_ADDRESS PCCARD_ATTRIBUTE_SPACE_ADDRESS
+#define CF_COMMON_SPACE_ADDRESS PCCARD_COMMON_SPACE_ADDRESS
+#define CF_IO_SPACE_ADDRESS PCCARD_IO_SPACE_ADDRESS
+#define CF_IO_SPACE_PRIMARY_ADDR PCCARD_IO_SPACE_PRIMARY_ADDR
+
+#define CF_TIMEOUT_ERROR PCCARD_TIMEOUT_ERROR
+#define CF_BUSY PCCARD_BUSY
+#define CF_PROGR PCCARD_PROGR
+#define CF_READY PCCARD_READY
+
+#define CF_SECTOR_SIZE PCCARD_SECTOR_SIZE
+
+/* Private macros ------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_PCCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1329 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The PCD HAL driver can be used as follows:
+
+ (#) Declare a PCD_HandleTypeDef handle structure, for example:
+ PCD_HandleTypeDef hpcd;
+
+ (#) Fill parameters of Init structure in HCD handle
+
+ (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...)
+
+ (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
+ (##) Enable the PCD/USB Low Level interface clock using
+ (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+ (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure PCD pin-out
+ (##) Configure PCD NVIC interrupt
+
+ (#)Associate the Upper USB device stack to the HAL PCD Driver:
+ (##) hpcd.pData = pdev;
+
+ (#)Enable PCD transmission and reception:
+ (##) HAL_PCD_Start();
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCD PCD
+ * @brief PCD HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b))
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup PCD_Private_Functions PCD Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the PCD according to the specified
+ * parameters in the PCD_InitTypeDef and initialize the associated handle.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
+{
+ uint32_t i = 0U;
+
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
+
+ hpcd->State = HAL_PCD_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_PCD_MspInit(hpcd);
+
+ /* Disable the Interrupts */
+ __HAL_PCD_DISABLE(hpcd);
+
+ /*Init the Core (common init.) */
+ USB_CoreInit(hpcd->Instance, hpcd->Init);
+
+ /* Force Device Mode*/
+ USB_SetCurrentMode(hpcd->Instance , USB_OTG_DEVICE_MODE);
+
+ /* Init endpoints structures */
+ for (i = 0U; i < 15U; i++)
+ {
+ /* Init ep structure */
+ hpcd->IN_ep[i].is_in = 1U;
+ hpcd->IN_ep[i].num = i;
+ hpcd->IN_ep[i].tx_fifo_num = i;
+ /* Control until ep is activated */
+ hpcd->IN_ep[i].type = EP_TYPE_CTRL;
+ hpcd->IN_ep[i].maxpacket = 0U;
+ hpcd->IN_ep[i].xfer_buff = 0U;
+ hpcd->IN_ep[i].xfer_len = 0U;
+ }
+
+ for (i = 0U; i < 15U; i++)
+ {
+ hpcd->OUT_ep[i].is_in = 0U;
+ hpcd->OUT_ep[i].num = i;
+ hpcd->IN_ep[i].tx_fifo_num = i;
+ /* Control until ep is activated */
+ hpcd->OUT_ep[i].type = EP_TYPE_CTRL;
+ hpcd->OUT_ep[i].maxpacket = 0U;
+ hpcd->OUT_ep[i].xfer_buff = 0U;
+ hpcd->OUT_ep[i].xfer_len = 0U;
+
+ hpcd->Instance->DIEPTXF[i] = 0U;
+ }
+
+ /* Init Device */
+ USB_DevInit(hpcd->Instance, hpcd->Init);
+
+ hpcd->State= HAL_PCD_STATE_READY;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ /* Activate LPM */
+ if (hpcd->Init.lpm_enable == 1U)
+ {
+ HAL_PCDEx_ActivateLPM(hpcd);
+ }
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+#ifdef USB_OTG_GCCFG_BCDEN
+ /* Activate Battery charging */
+ if (hpcd->Init.battery_charging_enable == 1U)
+ {
+ HAL_PCDEx_ActivateBCD(hpcd);
+ }
+#endif /* USB_OTG_GCCFG_BCDEN */
+
+ USB_DevDisconnect (hpcd->Instance);
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the PCD peripheral.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hpcd->State = HAL_PCD_STATE_BUSY;
+
+ /* Stop Device */
+ HAL_PCD_Stop(hpcd);
+
+ /* DeInit the low level hardware */
+ HAL_PCD_MspDeInit(hpcd);
+
+ hpcd->State = HAL_PCD_STATE_RESET;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the PCD MSP.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes PCD MSP.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start The USB OTG Device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ USB_DevConnect (hpcd->Instance);
+ __HAL_PCD_ENABLE(hpcd);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop The USB OTG Device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ __HAL_PCD_DISABLE(hpcd);
+ USB_StopDevice(hpcd->Instance);
+ USB_DevDisconnect(hpcd->Instance);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles PCD interrupt request.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ uint32_t i = 0U, ep_intr = 0U, epint = 0U, epnum = 0U;
+ uint32_t fifoemptymsk = 0U, temp = 0U;
+ USB_OTG_EPTypeDef *ep;
+ uint32_t hclk = 180000000;
+
+ /* ensure that we are in device mode */
+ if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE)
+ {
+ /* avoid spurious interrupt */
+ if(__HAL_PCD_IS_INVALID_INTERRUPT(hpcd))
+ {
+ return;
+ }
+
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS))
+ {
+ /* incorrect mode, acknowledge the interrupt */
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS);
+ }
+
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT))
+ {
+ epnum = 0U;
+
+ /* Read in the device interrupt bits */
+ ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance);
+
+ while ( ep_intr )
+ {
+ if (ep_intr & 0x1U)
+ {
+ epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, epnum);
+
+ if(( epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC)
+ {
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC);
+
+ if(hpcd->Init.dma_enable == 1U)
+ {
+ hpcd->OUT_ep[epnum].xfer_count = hpcd->OUT_ep[epnum].maxpacket- (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ);
+ hpcd->OUT_ep[epnum].xfer_buff += hpcd->OUT_ep[epnum].maxpacket;
+ }
+
+ HAL_PCD_DataOutStageCallback(hpcd, epnum);
+ if(hpcd->Init.dma_enable == 1U)
+ {
+ if((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U))
+ {
+ /* this is ZLP, so prepare EP0 for next setup */
+ USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
+ }
+ }
+ }
+
+ if(( epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP)
+ {
+ /* Inform the upper layer that a setup packet is available */
+ HAL_PCD_SetupStageCallback(hpcd);
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
+ }
+
+ if(( epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS)
+ {
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS);
+ }
+
+#ifdef USB_OTG_DOEPINT_OTEPSPR
+ /* Clear Status Phase Received interrupt */
+ if(( epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR)
+ {
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR);
+ }
+#endif /* USB_OTG_DOEPINT_OTEPSPR */
+ }
+ epnum++;
+ ep_intr >>= 1U;
+ }
+ }
+
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT))
+ {
+ /* Read in the device interrupt bits */
+ ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance);
+
+ epnum = 0U;
+
+ while ( ep_intr )
+ {
+ if (ep_intr & 0x1U) /* In ITR */
+ {
+ epint = USB_ReadDevInEPInterrupt(hpcd->Instance, epnum);
+
+ if(( epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC)
+ {
+ fifoemptymsk = 0x1U << epnum;
+ USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC);
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket;
+ }
+
+ HAL_PCD_DataInStageCallback(hpcd, epnum);
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ /* this is ZLP, so prepare EP0 for next setup */
+ if((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U))
+ {
+ /* prepare to rx more setup packets */
+ USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
+ }
+ }
+ }
+ if(( epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC);
+ }
+ if(( epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE);
+ }
+ if(( epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE);
+ }
+ if(( epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD);
+ }
+ if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE)
+ {
+ PCD_WriteEmptyTxFifo(hpcd , epnum);
+ }
+ }
+ epnum++;
+ ep_intr >>= 1U;
+ }
+ }
+
+ /* Handle Resume Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT))
+ {
+ /* Clear the Remote Wake-up Signaling */
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ if(hpcd->LPM_State == LPM_L1)
+ {
+ hpcd->LPM_State = LPM_L0;
+ HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE);
+ }
+ else
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+ {
+ HAL_PCD_ResumeCallback(hpcd);
+ }
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT);
+ }
+
+ /* Handle Suspend Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP))
+ {
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+ {
+
+ HAL_PCD_SuspendCallback(hpcd);
+ }
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
+ }
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ /* Handle LPM Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT);
+ if( hpcd->LPM_State == LPM_L0)
+ {
+ hpcd->LPM_State = LPM_L1;
+ hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >>2 ;
+ HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE);
+ }
+ else
+ {
+ HAL_PCD_SuspendCallback(hpcd);
+ }
+ }
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+ /* Handle Reset Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST))
+ {
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
+ USB_FlushTxFifo(hpcd->Instance , 0U);
+
+ for (i = 0U; i < hpcd->Init.dev_endpoints; i++)
+ {
+ USBx_INEP(i)->DIEPINT = 0xFFU;
+ USBx_OUTEP(i)->DOEPINT = 0xFFU;
+ }
+ USBx_DEVICE->DAINT = 0xFFFFFFFFU;
+ USBx_DEVICE->DAINTMSK |= 0x10001U;
+
+ if(hpcd->Init.use_dedicated_ep1)
+ {
+ USBx_DEVICE->DOUTEP1MSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
+ USBx_DEVICE->DINEP1MSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
+ }
+ else
+ {
+#ifdef USB_OTG_DOEPINT_OTEPSPR
+ USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM | USB_OTG_DOEPMSK_OTEPSPRM);
+#else
+ USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
+#endif /* USB_OTG_DOEPINT_OTEPSPR */
+ USBx_DEVICE->DIEPMSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
+ }
+
+ /* Set Default Address to 0 */
+ USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD;
+
+ /* setup EP0 to receive SETUP packets */
+ USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST);
+ }
+
+ /* Handle Enumeration done Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE))
+ {
+ USB_ActivateSetup(hpcd->Instance);
+ hpcd->Instance->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT;
+
+ if ( USB_GetDevSpeed(hpcd->Instance) == USB_OTG_SPEED_HIGH)
+ {
+ hpcd->Init.speed = USB_OTG_SPEED_HIGH;
+ hpcd->Init.ep0_mps = USB_OTG_HS_MAX_PACKET_SIZE ;
+ hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_HS_TRDT_VALUE << 10U) & USB_OTG_GUSBCFG_TRDT);
+ }
+ else
+ {
+ hpcd->Init.speed = USB_OTG_SPEED_FULL;
+ hpcd->Init.ep0_mps = USB_OTG_FS_MAX_PACKET_SIZE ;
+
+ /* The USBTRD is configured according to the tables below, depending on AHB frequency
+ used by application. In the low AHB frequency range it is used to stretch enough the USB response
+ time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access
+ latency to the Data FIFO */
+
+ if((hclk >= 14200000)&&(hclk < 15000000))
+ {
+ /* hclk Clock Range between 14.2-15 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xF << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 15000000)&&(hclk < 16000000))
+ {
+ /* hclk Clock Range between 15-16 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xE << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 16000000)&&(hclk < 17200000))
+ {
+ /* hclk Clock Range between 16-17.2 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xD << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 17200000)&&(hclk < 18500000))
+ {
+ /* hclk Clock Range between 17.2-18.5 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xC << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 18500000)&&(hclk < 20000000))
+ {
+ /* hclk Clock Range between 18.5-20 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xB << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 20000000)&&(hclk < 21800000))
+ {
+ /* hclk Clock Range between 20-21.8 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xA << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 21800000)&&(hclk < 24000000))
+ {
+ /* hclk Clock Range between 21.8-24 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x9 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 24000000)&&(hclk < 27700000))
+ {
+ /* hclk Clock Range between 24-27.7 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x8 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 27700000)&&(hclk < 32000000))
+ {
+ /* hclk Clock Range between 27.7-32 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x7 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else /* if(hclk >= 32000000) */
+ {
+ /* hclk Clock Range between 32-180 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x6 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+ }
+
+ HAL_PCD_ResetCallback(hpcd);
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE);
+ }
+
+ /* Handle RxQLevel Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL))
+ {
+ USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+ temp = USBx->GRXSTSP;
+
+ ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM];
+
+ if(((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17U) == STS_DATA_UPDT)
+ {
+ if((temp & USB_OTG_GRXSTSP_BCNT) != 0U)
+ {
+ USB_ReadPacket(USBx, ep->xfer_buff, (temp & USB_OTG_GRXSTSP_BCNT) >> 4U);
+ ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+ ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+ }
+ }
+ else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17U) == STS_SETUP_UPDT)
+ {
+ USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U);
+ ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+ }
+ USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+ }
+
+ /* Handle SOF Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF))
+ {
+ HAL_PCD_SOFCallback(hpcd);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF);
+ }
+
+ /* Handle Incomplete ISO IN Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR))
+ {
+ HAL_PCD_ISOINIncompleteCallback(hpcd, epnum);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR);
+ }
+
+ /* Handle Incomplete ISO OUT Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+ {
+ HAL_PCD_ISOOUTIncompleteCallback(hpcd, epnum);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+ }
+
+ /* Handle Connection event Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT))
+ {
+ HAL_PCD_ConnectCallback(hpcd);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT);
+ }
+
+ /* Handle Disconnection event Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT))
+ {
+ temp = hpcd->Instance->GOTGINT;
+
+ if((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET)
+ {
+ HAL_PCD_DisconnectCallback(hpcd);
+ }
+ hpcd->Instance->GOTGINT |= temp;
+ }
+ }
+}
+
+/**
+ * @brief Data OUT stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+// __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+//{
+ /* Prevent unused argument(s) compilation warning */
+ //UNUSED(hpcd);
+ //UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DataOutStageCallback could be implemented in the user file
+ */
+//}
+
+/**
+ * @brief Data IN stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DataInStageCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Setup stage callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SetupStageCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Start Of Frame callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SOFCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Reset callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ResetCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Suspend event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SuspendCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Resume event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ResumeCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO OUT callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO IN callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Connection event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ConnectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Disconnection event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DisconnectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Connect the USB device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ USB_DevConnect(hpcd->Instance);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Disconnect the USB device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ USB_DevDisconnect(hpcd->Instance);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the USB Device address.
+ * @param hpcd: PCD handle
+ * @param address: new device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address)
+{
+ __HAL_LOCK(hpcd);
+ USB_SetDevAddress(hpcd->Instance, address);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+/**
+ * @brief Open and configure an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param ep_mps: endpoint max packet size
+ * @param ep_type: endpoint type
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
+{
+ HAL_StatusTypeDef ret = HAL_OK;
+ USB_OTG_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+ }
+ ep->num = ep_addr & 0x7FU;
+
+ ep->is_in = (0x80U & ep_addr) != 0U;
+ ep->maxpacket = ep_mps;
+ ep->type = ep_type;
+ if (ep->is_in)
+ {
+ /* Assign a Tx FIFO */
+ ep->tx_fifo_num = ep->num;
+ }
+ /* Set initial data PID. */
+ if (ep_type == EP_TYPE_BULK )
+ {
+ ep->data_pid_start = 0U;
+ }
+
+ __HAL_LOCK(hpcd);
+ USB_ActivateEndpoint(hpcd->Instance , ep);
+ __HAL_UNLOCK(hpcd);
+ return ret;
+}
+
+
+/**
+ * @brief Deactivate an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+ }
+ ep->num = ep_addr & 0x7FU;
+
+ ep->is_in = (0x80U & ep_addr) != 0U;
+
+ __HAL_LOCK(hpcd);
+ USB_DeactivateEndpoint(hpcd->Instance , ep);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Receive an amount of data.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param pBuf: pointer to the reception buffer
+ * @param len: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0U;
+ ep->is_in = 0U;
+ ep->num = ep_addr & 0x7FU;
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ ep->dma_addr = (uint32_t)pBuf;
+ }
+
+ __HAL_LOCK(hpcd);
+
+ if ((ep_addr & 0x7FU) == 0U)
+ {
+ USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+ else
+ {
+ USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get Received Data Size.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval Data Size
+ */
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ return hpcd->OUT_ep[ep_addr & 0x7FU].xfer_count;
+}
+/**
+ * @brief Send an amount of data.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param pBuf: pointer to the transmission buffer
+ * @param len: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0U;
+ ep->is_in = 1U;
+ ep->num = ep_addr & 0x7FU;
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ ep->dma_addr = (uint32_t)pBuf;
+ }
+
+ __HAL_LOCK(hpcd);
+
+ if ((ep_addr & 0x7FU) == 0U)
+ {
+ USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+ else
+ {
+ USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set a STALL condition over an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 1U;
+ ep->num = ep_addr & 0x7FU;
+ ep->is_in = ((ep_addr & 0x80U) == 0x80U);
+
+
+ __HAL_LOCK(hpcd);
+ USB_EPSetStall(hpcd->Instance , ep);
+ if((ep_addr & 0x7FU) == 0U)
+ {
+ USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Clear a STALL condition over in an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 0U;
+ ep->num = ep_addr & 0x7FU;
+ ep->is_in = ((ep_addr & 0x80U) == 0x80U);
+
+ __HAL_LOCK(hpcd);
+ USB_EPClearStall(hpcd->Instance , ep);
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Flush an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ __HAL_LOCK(hpcd);
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ USB_FlushTxFifo(hpcd->Instance, ep_addr & 0x7FU);
+ }
+ else
+ {
+ USB_FlushRxFifo(hpcd->Instance);
+ }
+
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Activate remote wakeup signalling.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+ {
+ /* Activate Remote wakeup signaling */
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief De-activate remote wakeup signalling.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ /* De-activate Remote wakeup signaling */
+ USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG);
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the PCD handle state.
+ * @param hpcd: PCD handle
+ * @retval HAL state
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
+{
+ return hpcd->State;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup PCD_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Check FIFO for the next packet to be loaded.
+ * @param hpcd: PCD handle
+ * @param epnum : endpoint number
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ USB_OTG_EPTypeDef *ep;
+ int32_t len = 0U;
+ uint32_t len32b;
+ uint32_t fifoemptymsk = 0U;
+
+ ep = &hpcd->IN_ep[epnum];
+ len = ep->xfer_len - ep->xfer_count;
+
+ if (len > ep->maxpacket)
+ {
+ len = ep->maxpacket;
+ }
+
+
+ len32b = (len + 3U) / 4U;
+
+ while ( (USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b &&
+ ep->xfer_count < ep->xfer_len &&
+ ep->xfer_len != 0U)
+ {
+ /* Write the FIFO */
+ len = ep->xfer_len - ep->xfer_count;
+
+ if (len > ep->maxpacket)
+ {
+ len = ep->maxpacket;
+ }
+ len32b = (len + 3U) / 4U;
+
+ USB_WritePacket(USBx, ep->xfer_buff, epnum, len, hpcd->Init.dma_enable);
+
+ ep->xfer_buff += len;
+ ep->xfer_count += len;
+ }
+
+ if(len <= 0U)
+ {
+ fifoemptymsk = 0x1U << epnum;
+ USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,343 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_H
+#define __STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+/**
+ * @brief PCD State structure definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00U,
+ HAL_PCD_STATE_READY = 0x01U,
+ HAL_PCD_STATE_ERROR = 0x02U,
+ HAL_PCD_STATE_BUSY = 0x03U,
+ HAL_PCD_STATE_TIMEOUT = 0x04U
+} PCD_StateTypeDef;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+/* Device LPM suspend state */
+typedef enum
+{
+ LPM_L0 = 0x00U, /* on */
+ LPM_L1 = 0x01U, /* LPM L1 sleep */
+ LPM_L2 = 0x02U, /* suspend */
+ LPM_L3 = 0x03U /* off */
+}PCD_LPM_StateTypeDef;
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef PCD_EPTypeDef ;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
+ uint32_t BESL;
+ uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+#ifdef USB_OTG_GCCFG_BCDEN
+ uint32_t battery_charging_active; /*!< Enable or disable Battery charging.
+ This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GCCFG_BCDEN */
+ void *pData; /*!< Pointer to upper stack Handler */
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extension module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup PCD_Speed PCD Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0U
+#define PCD_SPEED_HIGH_IN_FULL 1U
+#define PCD_SPEED_FULL 2U
+/**
+ * @}
+ */
+
+/** @defgroup PCD_PHY_Module PCD PHY Module
+ * @{
+ */
+#define PCD_PHY_ULPI 1U
+#define PCD_PHY_EMBEDDED 2U
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
+ * @{
+ */
+#ifndef USBD_HS_TRDT_VALUE
+ #define USBD_HS_TRDT_VALUE 9U
+#endif /* USBD_HS_TRDT_VALUE */
+#ifndef USBD_FS_TRDT_VALUE
+ #define USBD_FS_TRDT_VALUE 5U
+#endif /* USBD_FS_TRDT_VALUE */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+ ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10U)
+
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08U)
+#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0CU)
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10U)
+
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08U)
+#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0CU)
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10U)
+
+#define USB_OTG_HS_WAKEUP_EXTI_LINE ((uint32_t)0x00100000U) /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_OTG_FS_WAKEUP_EXTI_LINE ((uint32_t)0x00040000U) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do{EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ }while(0)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do{EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do{EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ }while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do{EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,324 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCDEx PCDEx
+ * @brief PCD Extended HAL module driver
+ * @{
+ */
+#ifdef HAL_PCD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCD Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @brief PCDEx control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Update FIFO configuration
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Set Tx FIFO
+ * @param hpcd: PCD handle
+ * @param fifo: The number of Tx fifo
+ * @param size: Fifo size
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
+{
+ uint8_t i = 0U;
+ uint32_t Tx_Offset = 0U;
+
+ /* TXn min size = 16 words. (n : Transmit FIFO index)
+ When a TxFIFO is not used, the Configuration should be as follows:
+ case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
+ --> Txm can use the space allocated for Txn.
+ case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
+ --> Txn should be configured with the minimum space of 16 words
+ The FIFO is used optimally when used TxFIFOs are allocated in the top
+ of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
+ When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
+
+ Tx_Offset = hpcd->Instance->GRXFSIZ;
+
+ if(fifo == 0U)
+ {
+ hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((uint32_t)size << 16U) | Tx_Offset);
+ }
+ else
+ {
+ Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16U;
+ for (i = 0U; i < (fifo - 1U); i++)
+ {
+ Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16U);
+ }
+
+ /* Multiply Tx_Size by 2 to get higher performance */
+ hpcd->Instance->DIEPTXF[fifo - 1U] = (uint32_t)(((uint32_t)size << 16U) | Tx_Offset);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set Rx FIFO
+ * @param hpcd: PCD handle
+ * @param size: Size of Rx fifo
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
+{
+ hpcd->Instance->GRXFSIZ = size;
+
+ return HAL_OK;
+}
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Activate LPM feature
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ hpcd->lpm_active = ENABLE;
+ hpcd->LPM_State = LPM_L0;
+ USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM;
+ USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate LPM feature.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ hpcd->lpm_active = DISABLE;
+ USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM;
+ USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Send LPM message to user layer callback.
+ * @param hpcd: PCD handle
+ * @param msg: LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+}
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief HAL_PCDEx_BCD_VBUSDetect : handle BatteryCharging Process
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Start BCD When device is connected */
+ if (USBx_DEVICE->DCTL & USB_OTG_DCTL_SDIS)
+ {
+ /* Enable DCD : Data Contact Detect */
+ USBx->GCCFG |= USB_OTG_GCCFG_DCDEN;
+
+ /* Wait Detect flag or a timeout is happen*/
+ while ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == 0U)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > 1000U)
+ {
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR);
+ return;
+ }
+ }
+
+ /* Right response got */
+ HAL_Delay(100U);
+
+ /* Check Detect flag*/
+ if (USBx->GCCFG & USB_OTG_GCCFG_DCDET)
+ {
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION);
+ }
+
+ /*Primary detection: checks if connected to Standard Downstream Port
+ (without charging capability) */
+ USBx->GCCFG &=~ USB_OTG_GCCFG_DCDEN;
+ USBx->GCCFG |= USB_OTG_GCCFG_PDEN;
+ HAL_Delay(100U);
+
+ if (!(USBx->GCCFG & USB_OTG_GCCFG_PDET))
+ {
+ /* Case of Standard Downstream Port */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT);
+ }
+ else
+ {
+ /* start secondary detection to check connection to Charging Downstream
+ Port or Dedicated Charging Port */
+ USBx->GCCFG &=~ USB_OTG_GCCFG_PDEN;
+ USBx->GCCFG |= USB_OTG_GCCFG_SDEN;
+ HAL_Delay(100U);
+
+ if ((USBx->GCCFG) & USB_OTG_GCCFG_SDET)
+ {
+ /* case Dedicated Charging Port */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT);
+ }
+ else
+ {
+ /* case Charging Downstream Port */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT);
+ }
+ }
+ /* Battery Charging capability discovery finished */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED);
+ }
+}
+
+/**
+ * @brief HAL_PCDEx_ActivateBCD : active BatteryCharging feature
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ hpcd->battery_charging_active = ENABLE;
+ USBx->GCCFG |= (USB_OTG_GCCFG_BCDEN);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCDEx_DeActivateBCD : de-active BatteryCharging feature
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ hpcd->battery_charging_active = DISABLE;
+ USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN);
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCDEx_BatteryCharging_Callback : Send BatteryCharging message to user layer
+ * @param hpcd: PCD handle
+ * @param msg: LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+}
+
+#endif /* STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,133 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_EX_H
+#define __STM32F4xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+typedef enum
+{
+ PCD_LPM_L0_ACTIVE = 0x00U, /* on */
+ PCD_LPM_L1_ACTIVE = 0x01U /* LPM L1 sleep */
+}PCD_LPM_MsgTypeDef;
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+typedef enum
+{
+ PCD_BCD_ERROR = 0xFFU,
+ PCD_BCD_CONTACT_DETECTION = 0xFEU,
+ PCD_BCD_STD_DOWNSTREAM_PORT = 0xFDU,
+ PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFCU,
+ PCD_BCD_DEDICATED_CHARGING_PORT = 0xFBU,
+ PCD_BCD_DISCOVERY_COMPLETED = 0x00U
+}PCD_BCD_MsgTypeDef;
+#endif /* STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCD Extended Exported Functions
+ * @{
+ */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
+void HAL_PCDEx_ADP_Sensing_Start(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_ADP_Sensing_Callback(PCD_HandleTypeDef *hpcd);
+#endif /* STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,577 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWR PWR
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWR_Private_Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
+ * @{
+ */
+#define PVD_MODE_IT ((uint32_t)0x00010000U)
+#define PVD_MODE_EVT ((uint32_t)0x00020000U)
+#define PVD_RISING_EDGE ((uint32_t)0x00000001U)
+#define PVD_FALLING_EDGE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted
+ write accesses.
+ To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Enable the Power Controller (PWR) APB1 interface clock using the
+ __HAL_RCC_PWR_CLK_ENABLE() macro.
+ (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
+ * @retval None
+ */
+void HAL_PWR_DeInit(void)
+{
+ __HAL_RCC_PWR_FORCE_RESET();
+ __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+ * @brief Enables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+ *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+ *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Low Power modes configuration functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+
+ *** PVD configuration ***
+ =========================
+ [..]
+ (+) The PVD is used to monitor the VDD power supply by comparing it to a
+ threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+ (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+ than the PVD threshold. This event is internally connected to the EXTI
+ line16 and can generate an interrupt if enabled. This is done through
+ __HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
+ (+) The PVD is stopped in Standby mode.
+
+ *** Wake-up pin configuration ***
+ ================================
+ [..]
+ (+) Wake-up pin is used to wake up the system from Standby mode. This pin is
+ forced in input pull-down configuration and is active on rising edges.
+ (+) There is one Wake-up pin: Wake-up Pin 1 on PA.00.
+ (++) For STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin2 on PC.13
+ (++) For STM32F410xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx there are three Wake-Up pins: Pin1 on PA.00, Pin2 on PC.00 and Pin3 on PC.01
+
+ *** Low Power modes configuration ***
+ =====================================
+ [..]
+ The devices feature 3 low-power modes:
+ (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running.
+ (+) Stop mode: all clocks are stopped, regulator running, regulator
+ in low power mode
+ (+) Standby mode: 1.2V domain powered off.
+
+ *** Sleep mode ***
+ ==================
+ [..]
+ (+) Entry:
+ The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
+ functions with
+ (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+ -@@- The Regulator parameter is not used for the STM32F4 family
+ and is kept as parameter just to maintain compatibility with the
+ lower power families (STM32L).
+ (+) Exit:
+ Any peripheral interrupt acknowledged by the nested vectored interrupt
+ controller (NVIC) can wake up the device from Sleep mode.
+
+ *** Stop mode ***
+ =================
+ [..]
+ In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
+ and the HSE RC oscillators are disabled. Internal SRAM and register contents
+ are preserved.
+ The voltage regulator can be configured either in normal or low-power mode.
+ To minimize the consumption In Stop mode, FLASH can be powered off before
+ entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
+ It can be switched on again by software after exiting the Stop mode using
+ the HAL_PWREx_DisableFlashPowerDown() function.
+
+ (+) Entry:
+ The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON)
+ function with:
+ (++) Main regulator ON.
+ (++) Low Power regulator ON.
+ (+) Exit:
+ Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+
+ *** Standby mode ***
+ ====================
+ [..]
+ (+)
+ The Standby mode allows to achieve the lowest power consumption. It is based
+ on the Cortex-M4 deep sleep mode, with the voltage regulator disabled.
+ The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and
+ the HSE oscillator are also switched off. SRAM and register contents are lost
+ except for the RTC registers, RTC backup registers, backup SRAM and Standby
+ circuitry.
+
+ The voltage regulator is OFF.
+
+ (++) Entry:
+ (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+ (++) Exit:
+ (+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up,
+ tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
+
+ *** Auto-wake-up (AWU) from low-power mode ***
+ =============================================
+ [..]
+
+ (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+ Wake-up event, a tamper event or a time-stamp event, without depending on
+ an external interrupt (Auto-wake-up mode).
+
+ (+) RTC auto-wake-up (AWU) from the Stop and Standby modes
+
+ (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+ configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+ (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+ is necessary to configure the RTC to detect the tamper or time stamp event using the
+ HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
+
+ (++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to
+ configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
+ * information for the PVD.
+ * @note Refer to the electrical characteristics of your device datasheet for
+ * more details about the voltage threshold corresponding to each
+ * detection level.
+ * @retval None
+ */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+ assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+ /* Set PLS[7:5] bits according to PVDLevel value */
+ MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
+
+ /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+ __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+ __HAL_PWR_PVD_EXTI_DISABLE_IT();
+ __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
+ __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+ /* Configure interrupt mode */
+ if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_IT();
+ }
+
+ /* Configure event mode */
+ if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+ }
+
+ /* Configure the edge */
+ if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+ }
+
+ if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+ }
+}
+
+/**
+ * @brief Enables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_EnablePVD(void)
+{
+ *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_DisablePVD(void)
+{
+ *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Enables the Wake-up PINx functionality.
+ * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN1
+ * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices
+ * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx devices
+ * @retval None
+ */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameter */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+ /* Enable the wake up pin */
+ SET_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+ * @brief Disables the Wake-up PINx functionality.
+ * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN1
+ * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices
+ * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices
+ * @retval None
+ */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameter */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+ /* Disable the wake up pin */
+ CLEAR_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+ * @brief Enters Sleep mode.
+ *
+ * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+ *
+ * @note In Sleep mode, the systick is stopped to avoid exit from this mode with
+ * systick interrupt when used as time base for Timeout
+ *
+ * @param Regulator: Specifies the regulator state in SLEEP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
+ * @note This parameter is not used for the STM32F4 family and is kept as parameter
+ * just to maintain compatibility with the lower power families.
+ * @param SLEEPEntry: Specifies if SLEEP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+ /* Select SLEEP mode entry -------------------------------------------------*/
+ if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+}
+
+/**
+ * @brief Enters Stop mode.
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ * @note When exiting Stop mode by issuing an interrupt or a wake-up event,
+ * the HSI RC oscillator is selected as system clock.
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ * @param Regulator: Specifies the regulator state in Stop mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
+ * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
+ * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */
+ MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator);
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+ /* Select Stop mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+ * @brief Enters Standby mode.
+ * @note In Standby mode, all I/O pins are high impedance except for:
+ * - Reset pad (still available)
+ * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
+ * Alarm out, or RTC clock calibration out.
+ * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
+ * - WKUP pin 1 (PA0) if enabled.
+ * @retval None
+ */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+ /* Select Standby mode */
+ SET_BIT(PWR->CR, PWR_CR_PDDS);
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+ /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief This function handles the PWR PVD interrupt request.
+ * @note This API should be called under the PVD_IRQHandler().
+ * @retval None
+ */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+ /* Check PWR Exti flag */
+ if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+ {
+ /* PWR PVD interrupt user callback */
+ HAL_PWR_PVDCallback();
+
+ /* Clear PWR Exti pending bit */
+ __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+ }
+}
+
+/**
+ * @brief PWR PVD interrupt callback
+ * @retval None
+ */
+__weak void HAL_PWR_PVDCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PWR_PVDCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
+ * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * Setting this bit is useful when the processor is expected to run only on
+ * interruptions handling.
+ * @retval None
+ */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+ * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * @retval None
+ */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Enables CORTEX M4 SEVONPEND bit.
+ * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+ /* Set SEVONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @brief Disables CORTEX M4 SEVONPEND bit.
+ * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+ /* Clear SEVONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,449 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_H
+#define __STM32F4xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+ * @{
+ */
+
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
+ This parameter can be a value of @ref PWR_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+ * @{
+ */
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
+ (Compare internally to VREFINT) */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000U) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001U) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002U) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000U)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag PWR Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_BRR PWR_CSR_BRR
+#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A
+ * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
+ * when the device wakes up from Standby mode or by a system reset
+ * or power reset.
+ * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
+ * scaling output selection is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
+
+/**
+ * @brief Enable the PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable the PVD EXTI Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Enable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief Disable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief PVD EXTI line configuration: set rising & falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\
+ }while(0)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\
+ }while(0)
+
+/**
+ * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD Exti flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generates a Software interrupt on PVD EXTI line.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f4xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+ * @{
+ */
+#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_register_alias_address PWR Register alias address
+ * @{
+ */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+#define PWR_CR_OFFSET 0x00U
+#define PWR_CSR_OFFSET 0x04U
+#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
+#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_CR_register_alias PWR CR Register alias address
+ * @{
+ */
+/* --- CR Register ---*/
+/* Alias word address of DBP bit */
+#define DBP_BIT_NUMBER POSITION_VAL(PWR_CR_DBP)
+#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BIT_NUMBER POSITION_VAL(PWR_CR_PVDE)
+#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))
+
+/* Alias word address of PMODE bit */
+#define PMODE_BIT_NUMBER POSITION_VAL(PWR_CR_PMODE)
+#define CR_PMODE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PMODE_BIT_NUMBER * 4U))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
+ * @{
+ */
+/* --- CSR Register ---*/
+/* Alias word address of EWUP bit */
+#define EWUP_BIT_NUMBER POSITION_VAL(PWR_CSR_EWUP)
+#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+ * @{
+ */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+ * @{
+ */
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,649 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of PWR extension peripheral:
+ * + Peripheral Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Constants
+ * @{
+ */
+#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000U
+#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000U
+#define PWR_BKPREG_TIMEOUT_VALUE 1000U
+#define PWR_VOSRDY_TIMEOUT_VALUE 1000U
+/**
+ * @}
+ */
+
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions
+ * @brief Peripheral Extended features functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral extended features functions #####
+ ===============================================================================
+
+ *** Main and Backup Regulators configuration ***
+ ================================================
+ [..]
+ (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
+ the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
+ retained even in Standby or VBAT mode when the low power backup regulator
+ is enabled. It can be considered as an internal EEPROM when VBAT is
+ always present. You can use the HAL_PWREx_EnableBkUpReg() function to
+ enable the low power backup regulator.
+
+ (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
+ the backup SRAM is powered from VDD which replaces the VBAT power supply to
+ save battery life.
+
+ (+) The backup SRAM is not mass erased by a tamper event. It is read
+ protected to prevent confidential data, such as cryptographic private
+ key, from being accessed. The backup SRAM can be erased only through
+ the Flash interface when a protection level change from level 1 to
+ level 0 is requested.
+ -@- Refer to the description of Read protection (RDP) in the Flash
+ programming manual.
+
+ (+) The main internal regulator can be configured to have a tradeoff between
+ performance and power consumption when the device does not operate at
+ the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG()
+ macro which configure VOS bit in PWR_CR register
+
+ Refer to the product datasheets for more details.
+
+ *** FLASH Power Down configuration ****
+ =======================================
+ [..]
+ (+) By setting the FPDS bit in the PWR_CR register by using the
+ HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power
+ down mode when the device enters Stop mode. When the Flash memory
+ is in power down mode, an additional startup delay is incurred when
+ waking up from Stop mode.
+
+ (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, the scale can be modified only when the PLL
+ is OFF and the HSI or HSE clock source is selected as system clock.
+ The new value programmed is active only when the PLL is ON.
+ When the PLL is OFF, the voltage scale 3 is automatically selected.
+ Refer to the datasheets for more details.
+
+ *** Over-Drive and Under-Drive configuration ****
+ =================================================
+ [..]
+ (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Run mode: the main regulator has
+ 2 operating modes available:
+ (++) Normal mode: The CPU and core logic operate at maximum frequency at a given
+ voltage scaling (scale 1, scale 2 or scale 3)
+ (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a
+ higher frequency than the normal mode for a given voltage scaling (scale 1,
+ scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
+ disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow
+ the sequence described in Reference manual.
+
+ (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Stop mode: the main regulator or low power regulator
+ supplies a low power voltage to the 1.2V domain, thus preserving the content of registers
+ and internal SRAM. 2 operating modes are available:
+ (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only
+ available when the main regulator or the low power regulator is used in Scale 3 or
+ low voltage mode.
+ (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
+ available when the main regulator or the low power regulator is in low voltage mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
+{
+ uint32_t tickstart = 0U;
+
+ *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
+{
+ uint32_t tickstart = 0U;
+
+ *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableFlashPowerDown(void)
+{
+ *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableFlashPowerDown(void)
+{
+ *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Return Voltage Scaling Range.
+ * @retval The configured scale for the regulator voltage(VOS bit field).
+ * The returned value can be one of the following:
+ * - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ */
+uint32_t HAL_PWREx_GetVoltageRange(void)
+{
+ return (PWR->CR & PWR_CR_VOS);
+}
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/**
+ * @brief Configures the main internal regulator output voltage.
+ * @param VoltageScaling: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption.
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+ * the maximum value of fHCLK = 168 MHz.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+ * the maximum value of fHCLK = 144 MHz.
+ * @note When moving from Range 1 to Range 2, the system frequency must be decreased to
+ * a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API.
+ * When moving from Range 2 to Range 1, the system frequency can be increased to
+ * a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+ uint32_t tickstart = 0U;
+
+ assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+
+ /* Enable PWR RCC Clock Peripheral */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Set Range */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+ while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || \
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \
+ defined(STM32F412Cx)
+/**
+ * @brief Configures the main internal regulator output voltage.
+ * @param VoltageScaling: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption.
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+ * the maximum value of fHCLK is 168 MHz. It can be extended to
+ * 180 MHz by activating the over-drive mode.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+ * the maximum value of fHCLK is 144 MHz. It can be extended to,
+ * 168 MHz by activating the over-drive mode.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode,
+ * the maximum value of fHCLK is 120 MHz.
+ * @note To update the system clock frequency(SYSCLK):
+ * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
+ * - Call the HAL_RCC_OscConfig() to configure the PLL.
+ * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
+ * - Set the new system clock frequency using the HAL_RCC_ClockConfig().
+ * @note The scale can be modified only when the HSI or HSE clock source is selected
+ * as system clock source, otherwise the API returns HAL_ERROR.
+ * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
+ * value in the PWR_CR1 register are not taken in account.
+ * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
+ * @note The new voltage scale is active only when the PLL is ON.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+ uint32_t tickstart = 0U;
+
+ assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+
+ /* Enable PWR RCC Clock Peripheral */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+ {
+ /* Disable the main PLL */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set Range */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+ /* Enable the main PLL */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Enables Wakeup Pin Detection on high level (rising edge).
+ * @retval None
+ */
+void HAL_PWREx_EnableWakeUpPinPolarityRisingEdge(void)
+{
+ *(__IO uint32_t *) CSR_WUPP_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Enables Wakeup Pin Detection on low level (falling edge).
+ * @retval None
+ */
+void HAL_PWREx_EnableWakeUpPinPolarityFallingEdge(void)
+{
+ *(__IO uint32_t *) CSR_WUPP_BB = (uint32_t)ENABLE;
+}
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
+ defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Enables Main Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices.
+ * @retval None
+ */
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables Main Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices.
+ * @retval None
+ */
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Enables Low Power Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices.
+ * @retval None
+ */
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables Low Power Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices.
+ * @retval None
+ */
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE;
+}
+
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Activates the Over-Drive mode.
+ * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices.
+ * This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
+{
+ uint32_t tickstart = 0U;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable the Over-drive to extend the clock frequency to 180 Mhz */
+ __HAL_PWR_OVERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Over-Drive mode.
+ * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices.
+ * This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
+{
+ uint32_t tickstart = 0U;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Disable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Disable the Over-drive */
+ __HAL_PWR_OVERDRIVE_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enters in Under-Drive STOP mode.
+ *
+ * @note This mode is only available for STM32F42xxx/STM324F3xxx/STM32F446xx/STM32F469xx/STM32F479xx devices.
+ *
+ * @note This mode can be selected only when the Under-Drive is already active
+ *
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode
+ *
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ *
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ *
+ * @note When exiting Stop mode by issuing an interrupt or a wake-up event,
+ * the HSI RC oscillator is selected as system clock.
+ *
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ *
+ * @param Regulator: specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @param STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tmpreg1 = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Enable the Under-drive Mode ---------------------------------------------*/
+ /* Clear Under-drive flag */
+ __HAL_PWR_CLEAR_ODRUDR_FLAG();
+
+ /* Enable the Under-drive */
+ __HAL_PWR_UNDERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for UnderDrive mode is ready */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY))
+ {
+ if((HAL_GetTick() - tickstart) > PWR_UDERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tmpreg1 = PWR->CR;
+ /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
+ tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS);
+
+ /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
+ tmpreg1 |= Regulator;
+
+ /* Store the new value */
+ PWR->CR = tmpreg1;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE();
+ }
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+ return HAL_OK;
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,370 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_EX_H
+#define __STM32F4xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+ * @{
+ */
+#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
+#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
+#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2 ((uint32_t)0x00000000U) /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
+#else
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
+ 180 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
+ 168 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins
+ * @{
+ */
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x00000080U)
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define PWR_WAKEUP_PIN3 ((uint32_t)0x00000040U)
+#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \
+ STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+#else
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macros to enable or disable the Over drive mode.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Over drive switching.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Under drive mode.
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode.
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
+
+/** @brief Check PWR flag is set or not.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+ * is ready
+ * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+ * switching is ready
+ * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+ * is enabled in Stop mode
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+ * @{
+ */
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void);
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+void HAL_PWREx_EnableWakeUpPinPolarityRisingEdge(void);
+void HAL_PWREx_EnableWakeUpPinPolarityFallingEdge(void);
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
+ defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\
+ STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWREx Private Constants
+ * @{
+ */
+
+/** @defgroup PWREx_register_alias_address PWREx Register alias address
+ * @{
+ */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+/* --- CR Register ---*/
+/* Alias word address of FPDS bit */
+#define FPDS_BIT_NUMBER POSITION_VAL(PWR_CR_FPDS)
+#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
+
+/* Alias word address of ODEN bit */
+#define ODEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODEN)
+#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U))
+
+/* Alias word address of ODSWEN bit */
+#define ODSWEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODSWEN)
+#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U))
+
+/* Alias word address of MRLVDS bit */
+#define MRLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_MRLVDS)
+#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U))
+
+/* Alias word address of LPLVDS bit */
+#define LPLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_LPLVDS)
+#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U))
+
+ /**
+ * @}
+ */
+
+/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
+ * @{
+ */
+/* --- CSR Register ---*/
+/* Alias word address of BRE bit */
+#define BRE_BIT_NUMBER POSITION_VAL(PWR_CSR_BRE)
+#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/* Alias word address of WUPP bit */
+#define WUPP_BIT_NUMBER POSITION_VAL(PWR_CSR_WUPP)
+#define CSR_WUPP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (WUPP_BIT_NUMBER * 4U))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+ * @{
+ */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
+#else
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+
+#if defined(STM32F446xx)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
+#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN3))
+#else
+#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2352 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_qspi.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief QSPI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the QuadSPI interface (QSPI).
+ * + Initialization and de-initialization functions
+ * + Indirect functional mode management
+ * + Memory-mapped functional mode management
+ * + Auto-polling functional mode management
+ * + Interrupts and flags management
+ * + DMA channel configuration for indirect functional mode
+ * + Errors management and abort functionality
+ *
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ *** Initialization ***
+ ======================
+ [..]
+ (#) As prerequisite, fill in the HAL_QSPI_MspInit() :
+ (++) Enable QuadSPI clock interface with __HAL_RCC_QSPI_CLK_ENABLE().
+ (++) Reset QuadSPI IP with __HAL_RCC_QSPI_FORCE_RESET() and __HAL_RCC_QSPI_RELEASE_RESET().
+ (++) Enable the clocks for the QuadSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE().
+ (++) Configure these QuadSPI pins in alternate mode using HAL_GPIO_Init().
+ (++) If interrupt mode is used, enable and configure QuadSPI global
+ interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+ (++) If DMA mode is used, enable the clocks for the QuadSPI DMA channel
+ with __HAL_RCC_DMAx_CLK_ENABLE(), configure DMA with HAL_DMA_Init(),
+ link it with QuadSPI handle using __HAL_LINKDMA(), enable and configure
+ DMA channel global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+ (#) Configure the flash size, the clock prescaler, the fifo threshold, the
+ clock mode, the sample shifting and the CS high time using the HAL_QSPI_Init() function.
+
+ *** Indirect functional mode ***
+ ================================
+ [..]
+ (#) Configure the command sequence using the HAL_QSPI_Command() or HAL_QSPI_Command_IT()
+ functions :
+ (++) Instruction phase : the mode used and if present the instruction opcode.
+ (++) Address phase : the mode used and if present the size and the address value.
+ (++) Alternate-bytes phase : the mode used and if present the size and the alternate
+ bytes values.
+ (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+ (++) Data phase : the mode used and if present the number of bytes.
+ (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
+ if activated.
+ (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+ (#) If no data is required for the command, it is sent directly to the memory :
+ (++) In polling mode, the output of the function is done when the transfer is complete.
+ (++) In interrupt mode, HAL_QSPI_CmdCpltCallback() will be called when the transfer is complete.
+ (#) For the indirect write mode, use HAL_QSPI_Transmit(), HAL_QSPI_Transmit_DMA() or
+ HAL_QSPI_Transmit_IT() after the command configuration :
+ (++) In polling mode, the output of the function is done when the transfer is complete.
+ (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold
+ is reached and HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
+ (++) In DMA mode, HAL_QSPI_TxHalfCpltCallback() will be called at the half transfer and
+ HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
+ (#) For the indirect read mode, use HAL_QSPI_Receive(), HAL_QSPI_Receive_DMA() or
+ HAL_QSPI_Receive_IT() after the command configuration :
+ (++) In polling mode, the output of the function is done when the transfer is complete.
+ (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold
+ is reached and HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
+ (++) In DMA mode, HAL_QSPI_RxHalfCpltCallback() will be called at the half transfer and
+ HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
+
+ *** Auto-polling functional mode ***
+ ====================================
+ [..]
+ (#) Configure the command sequence and the auto-polling functional mode using the
+ HAL_QSPI_AutoPolling() or HAL_QSPI_AutoPolling_IT() functions :
+ (++) Instruction phase : the mode used and if present the instruction opcode.
+ (++) Address phase : the mode used and if present the size and the address value.
+ (++) Alternate-bytes phase : the mode used and if present the size and the alternate
+ bytes values.
+ (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+ (++) Data phase : the mode used.
+ (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
+ if activated.
+ (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+ (++) The size of the status bytes, the match value, the mask used, the match mode (OR/AND),
+ the polling interval and the automatic stop activation.
+ (#) After the configuration :
+ (++) In polling mode, the output of the function is done when the status match is reached. The
+ automatic stop is activated to avoid an infinite loop.
+ (++) In interrupt mode, HAL_QSPI_StatusMatchCallback() will be called each time the status match is reached.
+
+ *** Memory-mapped functional mode ***
+ =====================================
+ [..]
+ (#) Configure the command sequence and the memory-mapped functional mode using the
+ HAL_QSPI_MemoryMapped() functions :
+ (++) Instruction phase : the mode used and if present the instruction opcode.
+ (++) Address phase : the mode used and the size.
+ (++) Alternate-bytes phase : the mode used and if present the size and the alternate
+ bytes values.
+ (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+ (++) Data phase : the mode used.
+ (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
+ if activated.
+ (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+ (++) The timeout activation and the timeout period.
+ (#) After the configuration, the QuadSPI will be used as soon as an access on the AHB is done on
+ the address range. HAL_QSPI_TimeOutCallback() will be called when the timeout expires.
+
+ *** Errors management and abort functionality ***
+ ==================================================
+ [..]
+ (#) HAL_QSPI_GetError() function gives the error raised during the last operation.
+ (#) HAL_QSPI_Abort() and HAL_QSPI_AbortIT() functions aborts any on-going operation and
+ flushes the fifo :
+ (++) In polling mode, the output of the function is done when the transfer
+ complete bit is set and the busy bit cleared.
+ (++) In interrupt mode, HAL_QSPI_AbortCpltCallback() will be called when
+ the transfer complete bi is set.
+
+ *** Control functions ***
+ =========================
+ [..]
+ (#) HAL_QSPI_GetState() function gives the current state of the HAL QuadSPI driver.
+ (#) HAL_QSPI_SetTimeout() function configures the timeout value used in the driver.
+ (#) HAL_QSPI_SetFifoThreshold() function configures the threshold on the Fifo of the QSPI IP.
+ (#) HAL_QSPI_GetFifoThreshold() function gives the current of the Fifo's threshold
+
+ *** Workarounds linked to Silicon Limitation ***
+ ====================================================
+ [..]
+ (#) Workarounds Implemented inside HAL Driver
+ (++) Extra data written in the FIFO at the end of a read transfer
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup QSPI QSPI
+ * @brief QSPI HAL module driver
+ * @{
+ */
+#ifdef HAL_QSPI_MODULE_ENABLED
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup QSPI_Private_Constants
+ * @{
+ */
+#define QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE ((uint32_t)0x00000000U) /*!<Indirect write mode*/
+#define QSPI_FUNCTIONAL_MODE_INDIRECT_READ ((uint32_t)QUADSPI_CCR_FMODE_0) /*!<Indirect read mode*/
+#define QSPI_FUNCTIONAL_MODE_AUTO_POLLING ((uint32_t)QUADSPI_CCR_FMODE_1) /*!<Automatic polling mode*/
+#define QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED ((uint32_t)QUADSPI_CCR_FMODE) /*!<Memory-mapped mode*/
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @addtogroup QSPI_Private_Macros QSPI Private Macros
+ * @{
+ */
+#define IS_QSPI_FUNCTIONAL_MODE(MODE) (((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE) || \
+ ((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_READ) || \
+ ((MODE) == QSPI_FUNCTIONAL_MODE_AUTO_POLLING) || \
+ ((MODE) == QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup QSPI_Private_Functions QSPI Private Functions
+ * @{
+ */
+static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMAError(DMA_HandleTypeDef *hdma);
+static void QSPI_DMAAbortCplt(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag, FlagStatus State, uint32_t tickstart, uint32_t Timeout);
+static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup QSPI_Exported_Functions QSPI Exported Functions
+ * @{
+ */
+
+/** @defgroup QSPI_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Initialize the QuadSPI.
+ (+) De-initialize the QuadSPI.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the QSPI mode according to the specified parameters
+ * in the QSPI_InitTypeDef and creates the associated handle.
+ * @param hqspi: qspi handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Init(QSPI_HandleTypeDef *hqspi)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the QSPI handle allocation */
+ if(hqspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_ALL_INSTANCE(hqspi->Instance));
+ assert_param(IS_QSPI_CLOCK_PRESCALER(hqspi->Init.ClockPrescaler));
+ assert_param(IS_QSPI_FIFO_THRESHOLD(hqspi->Init.FifoThreshold));
+ assert_param(IS_QSPI_SSHIFT(hqspi->Init.SampleShifting));
+ assert_param(IS_QSPI_FLASH_SIZE(hqspi->Init.FlashSize));
+ assert_param(IS_QSPI_CS_HIGH_TIME(hqspi->Init.ChipSelectHighTime));
+ assert_param(IS_QSPI_CLOCK_MODE(hqspi->Init.ClockMode));
+ assert_param(IS_QSPI_DUAL_FLASH_MODE(hqspi->Init.DualFlash));
+
+ if (hqspi->Init.DualFlash != QSPI_DUALFLASH_ENABLE )
+ {
+ assert_param(IS_QSPI_FLASH_ID(hqspi->Init.FlashID));
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hqspi->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_QSPI_MspInit(hqspi);
+
+ /* Configure the default timeout for the QSPI memory access */
+ HAL_QSPI_SetTimeout(hqspi, HAL_QPSI_TIMEOUT_DEFAULT_VALUE);
+ }
+
+ /* Configure QSPI FIFO Threshold */
+ MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES, ((hqspi->Init.FifoThreshold - 1) << 8));
+
+ /* Wait till BUSY flag reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout);
+
+ if(status == HAL_OK)
+ {
+
+ /* Configure QSPI Clock Prescaler and Sample Shift */
+ MODIFY_REG(hqspi->Instance->CR,(QUADSPI_CR_PRESCALER | QUADSPI_CR_SSHIFT | QUADSPI_CR_FSEL | QUADSPI_CR_DFM), ((hqspi->Init.ClockPrescaler << 24)| hqspi->Init.SampleShifting | hqspi->Init.FlashID| hqspi->Init.DualFlash ));
+
+ /* Configure QSPI Flash Size, CS High Time and Clock Mode */
+ MODIFY_REG(hqspi->Instance->DCR, (QUADSPI_DCR_FSIZE | QUADSPI_DCR_CSHT | QUADSPI_DCR_CKMODE),
+ ((hqspi->Init.FlashSize << 16) | hqspi->Init.ChipSelectHighTime | hqspi->Init.ClockMode));
+
+ /* Enable the QSPI peripheral */
+ __HAL_QSPI_ENABLE(hqspi);
+
+ /* Set QSPI error code to none */
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Initialize the QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief DeInitializes the QSPI peripheral
+ * @param hqspi: qspi handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_DeInit(QSPI_HandleTypeDef *hqspi)
+{
+ /* Check the QSPI handle allocation */
+ if(hqspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ /* Disable the QSPI Peripheral Clock */
+ __HAL_QSPI_DISABLE(hqspi);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_QSPI_MspDeInit(hqspi);
+
+ /* Set QSPI error code to none */
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Initialize the QSPI state */
+ hqspi->State = HAL_QSPI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hqspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief QSPI MSP Init
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+ __weak void HAL_QSPI_MspInit(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_QSPI_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief QSPI MSP DeInit
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+ __weak void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_QSPI_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Exported_Functions_Group2 IO operation functions
+ * @brief QSPI Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Handle the interrupts.
+ (+) Handle the command sequence.
+ (+) Transmit data in blocking, interrupt or DMA mode.
+ (+) Receive data in blocking, interrupt or DMA mode.
+ (+) Manage the auto-polling functional mode.
+ (+) Manage the memory-mapped functional mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function handles QSPI interrupt request.
+ * @param hqspi: QSPI handle
+ * @retval None.
+ */
+void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi)
+{
+ __IO uint32_t *data_reg;
+ uint32_t flag = READ_REG(hqspi->Instance->SR);
+ uint32_t itsource = READ_REG(hqspi->Instance->CR);
+
+ /* QSPI Fifo Threshold interrupt occurred ----------------------------------*/
+ if(((flag & QSPI_FLAG_FT)!= RESET) && ((itsource & QSPI_IT_FT)!= RESET))
+ {
+ data_reg = &hqspi->Instance->DR;
+
+ if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
+ {
+ /* Transmission process */
+ while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
+ {
+ if (hqspi->TxXferCount > 0)
+ {
+ /* Fill the FIFO until it is full */
+ *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
+ hqspi->TxXferCount--;
+ }
+ else
+ {
+ /* No more data available for the transfer */
+ /* Disable the QSPI FIFO Threshold Interrupt */
+ __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_FT);
+ break;
+ }
+ }
+ }
+ else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
+ {
+ /* Receiving Process */
+ while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
+ {
+ if (hqspi->RxXferCount > 0)
+ {
+ /* Read the FIFO until it is empty */
+ *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+ hqspi->RxXferCount--;
+ }
+ else
+ {
+ /* All data have been received for the transfer */
+ /* Disable the QSPI FIFO Threshold Interrupt */
+ __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_FT);
+ break;
+ }
+ }
+ }
+
+ /* FIFO Threshold callback */
+ HAL_QSPI_FifoThresholdCallback(hqspi);
+ }
+
+ /* QSPI Transfer Complete interrupt occurred -------------------------------*/
+ else if(((flag & QSPI_FLAG_TC)!= RESET) && ((itsource & QSPI_IT_TC)!= RESET))
+ {
+ /* Clear interrupt */
+ WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TC);
+
+ /* Disable the QSPI FIFO Threshold, Transfer Error and Transfer complete Interrupts */
+ __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
+
+ /* Transfer complete callback */
+ if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
+ {
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Disable the DMA channel */
+ __HAL_DMA_DISABLE(hqspi->hdma);
+ }
+
+/* Clear Busy bit */
+ HAL_QSPI_Abort_IT(hqspi);
+
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* TX Complete callback */
+ HAL_QSPI_TxCpltCallback(hqspi);
+ }
+ else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
+ {
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Disable the DMA channel */
+ __HAL_DMA_DISABLE(hqspi->hdma);
+ }
+ else
+ {
+ data_reg = &hqspi->Instance->DR;
+ while(READ_BIT(hqspi->Instance->SR, QUADSPI_SR_FLEVEL) != 0)
+ {
+ if (hqspi->RxXferCount > 0)
+ {
+ /* Read the last data received in the FIFO until it is empty */
+ *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+ hqspi->RxXferCount--;
+ }
+ else
+ {
+ /* All data have been received for the transfer */
+ break;
+ }
+ }
+ }
+ /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+ HAL_QSPI_Abort_IT(hqspi);
+
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* RX Complete callback */
+ HAL_QSPI_RxCpltCallback(hqspi);
+ }
+ else if(hqspi->State == HAL_QSPI_STATE_BUSY)
+ {
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* Command Complete callback */
+ HAL_QSPI_CmdCpltCallback(hqspi);
+ }
+ else if(hqspi->State == HAL_QSPI_STATE_ABORT)
+ {
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ if (hqspi->ErrorCode == HAL_QSPI_ERROR_NONE)
+ {
+ /* Abort called by the user */
+
+ /* Abort Complete callback */
+ HAL_QSPI_AbortCpltCallback(hqspi);
+ }
+ else
+ {
+ /* Abort due to an error (eg : DMA error) */
+
+ /* Error callback */
+ HAL_QSPI_ErrorCallback(hqspi);
+ }
+ }
+ }
+
+ /* QSPI Status Match interrupt occurred ------------------------------------*/
+ else if(((flag & QSPI_FLAG_SM)!= RESET) && ((itsource & QSPI_IT_SM)!= RESET))
+ {
+ /* Clear interrupt */
+ WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_SM);
+
+ /* Check if the automatic poll mode stop is activated */
+ if(READ_BIT(hqspi->Instance->CR, QUADSPI_CR_APMS) != 0)
+ {
+ /* Disable the QSPI Transfer Error and Status Match Interrupts */
+ __HAL_QSPI_DISABLE_IT(hqspi, (QSPI_IT_SM | QSPI_IT_TE));
+
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+
+ /* Status match callback */
+ HAL_QSPI_StatusMatchCallback(hqspi);
+ }
+
+ /* QSPI Transfer Error interrupt occurred ----------------------------------*/
+ else if(((flag & QSPI_FLAG_TE)!= RESET) && ((itsource & QSPI_IT_TE)!= RESET))
+ {
+ /* Clear interrupt */
+ WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TE);
+
+ /* Disable all the QSPI Interrupts */
+ __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
+
+ /* Set error code */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_TRANSFER;
+
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Disable the DMA channel */
+ hqspi->hdma->XferAbortCallback = QSPI_DMAAbortCplt;
+ HAL_DMA_Abort_IT(hqspi->hdma);
+ }
+ else
+ {
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* Error callback */
+ HAL_QSPI_ErrorCallback(hqspi);
+ }
+ }
+
+ /* QSPI Timeout interrupt occurred -----------------------------------------*/
+ else if(((flag & QSPI_FLAG_TO)!= RESET) && ((itsource & QSPI_IT_TO)!= RESET))
+ {
+ /* Clear interrupt */
+ WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TO);
+
+ /* Time out callback */
+ HAL_QSPI_TimeOutCallback(hqspi);
+ }
+}
+
+/**
+ * @brief Sets the command configuration.
+ * @param hqspi: QSPI handle
+ * @param cmd : structure that contains the command configuration information
+ * @param Timeout : Time out duration
+ * @note This function is used only in Indirect Read or Write Modes
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Command(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_BUSY;
+
+ /* Wait till BUSY flag reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Call the configuration function */
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ if (cmd->DataMode == QSPI_DATA_NONE)
+ {
+ /* When there is no data phase, the transfer start as soon as the configuration is done
+ so wait until TC flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+
+ }
+ else
+ {
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Sets the command configuration in interrupt mode.
+ * @param hqspi: QSPI handle
+ * @param cmd : structure that contains the command configuration information
+ * @note This function is used only in Indirect Read or Write Modes
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Command_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd)
+{
+ __IO uint32_t count = 0U;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_BUSY;
+
+ /* Wait till BUSY flag reset */
+ count = (hqspi->Timeout) * (SystemCoreClock / 16U / 1000U);
+ do
+ {
+ if (count-- == 0)
+ {
+ hqspi->State = HAL_QSPI_STATE_ERROR;
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT;
+ status = HAL_TIMEOUT;
+ }
+ }
+ while ((__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY)) != RESET);
+
+ if (status == HAL_OK)
+ {
+ if (cmd->DataMode == QSPI_DATA_NONE)
+ {
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC);
+ }
+
+ /* Call the configuration function */
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ if (cmd->DataMode == QSPI_DATA_NONE)
+ {
+ /* When there is no data phase, the transfer start as soon as the configuration is done
+ so activate TC and TE interrupts */
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI Transfer Error Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_TC);
+ }
+ else
+ {
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Transmit an amount of data in blocking mode.
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @param Timeout : Time out duration
+ * @note This function is used only in Indirect Write Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Transmit(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tickstart = HAL_GetTick();
+ __IO uint32_t *data_reg = &hqspi->Instance->DR;
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ if(pData != NULL )
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+ /* Configure counters and size of the handle */
+ hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->pTxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional as indirect write */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ while(hqspi->TxXferCount > 0)
+ {
+ /* Wait until FT flag is set to send data */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_FT, SET, tickstart, Timeout);
+
+ if (status != HAL_OK)
+ {
+ break;
+ }
+
+ *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
+ hqspi->TxXferCount--;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Wait until TC flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Clear Transfer Complete bit */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Clear Busy bit */
+ status = HAL_QSPI_Abort(hqspi);
+ }
+ }
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ return status;
+}
+
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @param Timeout : Time out duration
+ * @note This function is used only in Indirect Read Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Receive(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+ __IO uint32_t *data_reg = &hqspi->Instance->DR;
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+ if(pData != NULL )
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+
+ /* Configure counters and size of the handle */
+ hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->pRxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional as indirect read */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+ /* Start the transfer by re-writing the address in AR register */
+ WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+ while(hqspi->RxXferCount > 0)
+ {
+ /* Wait until FT or TC flag is set to read received data */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, (QSPI_FLAG_FT | QSPI_FLAG_TC), SET, tickstart, Timeout);
+
+ if (status != HAL_OK)
+ {
+ break;
+ }
+
+ *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+ hqspi->RxXferCount--;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Wait until TC flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Clear Transfer Complete bit */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+ status = HAL_QSPI_Abort(hqspi);
+ }
+ }
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ return status;
+}
+
+/**
+ * @brief Send an amount of data in interrupt mode
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @note This function is used only in Indirect Write Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Transmit_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+ if(pData != NULL )
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+ /* Configure counters and size of the handle */
+ hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->pTxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional as indirect write */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
+
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Receive an amount of data in no-blocking mode with Interrupt
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @note This function is used only in Indirect Read Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Receive_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ if(pData != NULL )
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+
+ /* Configure counters and size of the handle */
+ hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->pRxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional as indirect read */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+ /* Start the transfer by re-writing the address in AR register */
+ WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode with DMA.
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @note This function is used only in Indirect Write Mode
+ * @note If DMA peripheral access is configured as halfword, the number
+ * of data and the fifo threshold should be aligned on halfword
+ * @note If DMA peripheral access is configured as word, the number
+ * of data and the fifo threshold should be aligned on word
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Transmit_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t *tmp;
+ uint32_t data_size = (READ_REG(hqspi->Instance->DLR) + 1);
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ /* Clear the error code */
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ if(pData != NULL )
+ {
+ /* Configure counters of the handle */
+ if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE)
+ {
+ hqspi->TxXferCount = data_size;
+ }
+ else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_HALFWORD)
+ {
+ if (((data_size % 2) != 0) || ((hqspi->Init.FifoThreshold % 2) != 0))
+ {
+ /* The number of data or the fifo threshold is not aligned on halfword
+ => no transfer possible with DMA peripheral access configured as halfword */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ else
+ {
+ hqspi->TxXferCount = (data_size >> 1);
+ }
+ }
+ else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_WORD)
+ {
+ if (((data_size % 4) != 0) || ((hqspi->Init.FifoThreshold % 4) != 0))
+ {
+ /* The number of data or the fifo threshold is not aligned on word
+ => no transfer possible with DMA peripheral access configured as word */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ else
+ {
+ hqspi->TxXferCount = (data_size >> 2);
+ }
+ }
+
+ if (status == HAL_OK)
+ {
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, (QSPI_FLAG_TE | QSPI_FLAG_TC));
+
+ /* Configure size and pointer of the handle */
+ hqspi->TxXferSize = hqspi->TxXferCount;
+ hqspi->pTxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional mode as indirect write */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ /* Set the QSPI DMA transfer complete callback */
+ hqspi->hdma->XferCpltCallback = QSPI_DMATxCplt;
+
+ /* Set the QSPI DMA Half transfer complete callback */
+ hqspi->hdma->XferHalfCpltCallback = QSPI_DMATxHalfCplt;
+
+ /* Set the DMA error callback */
+ hqspi->hdma->XferErrorCallback = QSPI_DMAError;
+
+ /* Clear the DMA abort callback */
+ hqspi->hdma->XferAbortCallback = NULL;
+
+ /* Configure the direction of the DMA */
+ hqspi->hdma->Init.Direction = DMA_MEMORY_TO_PERIPH;
+ MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
+
+ /* Enable the QSPI transmit DMA Channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hqspi->hdma, *(uint32_t*)tmp, (uint32_t)&hqspi->Instance->DR, hqspi->TxXferSize);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI transfer error Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE);
+
+ /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+ }
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode with DMA.
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer.
+ * @note This function is used only in Indirect Read Mode
+ * @note If DMA peripheral access is configured as halfword, the number
+ * of data and the fifo threshold should be aligned on halfword
+ * @note If DMA peripheral access is configured as word, the number
+ * of data and the fifo threshold should be aligned on word
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Receive_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t *tmp;
+ uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+ uint32_t data_size = (READ_REG(hqspi->Instance->DLR) + 1);
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ if(pData != NULL )
+ {
+ /* Configure counters of the handle */
+ if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE)
+ {
+ hqspi->RxXferCount = data_size;
+ }
+ else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_HALFWORD)
+ {
+ if (((data_size % 2) != 0) || ((hqspi->Init.FifoThreshold % 2) != 0))
+ {
+ /* The number of data or the fifo threshold is not aligned on halfword
+ => no transfer possible with DMA peripheral access configured as halfword */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ else
+ {
+ hqspi->RxXferCount = (data_size >> 1);
+ }
+ }
+ else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_WORD)
+ {
+ if (((data_size % 4) != 0) || ((hqspi->Init.FifoThreshold % 4) != 0))
+ {
+ /* The number of data or the fifo threshold is not aligned on word
+ => no transfer possible with DMA peripheral access configured as word */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ else
+ {
+ hqspi->RxXferCount = (data_size >> 2);
+ }
+ }
+
+ if (status == HAL_OK)
+ {
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, (QSPI_FLAG_TE | QSPI_FLAG_TC));
+
+ /* Configure size and pointer of the handle */
+ hqspi->RxXferSize = hqspi->RxXferCount;
+ hqspi->pRxBuffPtr = pData;
+
+ /* Set the QSPI DMA transfer complete callback */
+ hqspi->hdma->XferCpltCallback = QSPI_DMARxCplt;
+
+ /* Set the QSPI DMA Half transfer complete callback */
+ hqspi->hdma->XferHalfCpltCallback = QSPI_DMARxHalfCplt;
+
+ /* Set the DMA error callback */
+ hqspi->hdma->XferErrorCallback = QSPI_DMAError;
+
+ /* Clear the DMA abort callback */
+ hqspi->hdma->XferAbortCallback = NULL;
+
+ /* Configure the direction of the DMA */
+ hqspi->hdma->Init.Direction = DMA_PERIPH_TO_MEMORY;
+ MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
+
+ /* Enable the DMA Channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hqspi->hdma, (uint32_t)&hqspi->Instance->DR, *(uint32_t*)tmp, hqspi->RxXferSize);
+
+ /* Configure QSPI: CCR register with functional as indirect read */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+ /* Start the transfer by re-writing the address in AR register */
+ WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI transfer error Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE);
+
+ /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+ }
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Configure the QSPI Automatic Polling Mode in blocking mode.
+ * @param hqspi: QSPI handle
+ * @param cmd: structure that contains the command configuration information.
+ * @param cfg: structure that contains the polling configuration information.
+ * @param Timeout : Time out duration
+ * @note This function is used only in Automatic Polling Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ assert_param(IS_QSPI_INTERVAL(cfg->Interval));
+ assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
+ assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
+
+ /* Wait till BUSY flag reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Configure QSPI: PSMAR register with the status match value */
+ WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
+
+ /* Configure QSPI: PSMKR register with the status mask value */
+ WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
+
+ /* Configure QSPI: PIR register with the interval value */
+ WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
+
+ /* Configure QSPI: CR register with Match mode and Automatic stop enabled
+ (otherwise there will be an infinite loop in blocking mode) */
+ MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS),
+ (cfg->MatchMode | QSPI_AUTOMATIC_STOP_ENABLE));
+
+ /* Call the configuration function */
+ cmd->NbData = cfg->StatusBytesSize;
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
+
+ /* Wait until SM flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_SM, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM);
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Configure the QSPI Automatic Polling Mode in non-blocking mode.
+ * @param hqspi: QSPI handle
+ * @param cmd: structure that contains the command configuration information.
+ * @param cfg: structure that contains the polling configuration information.
+ * @note This function is used only in Automatic Polling Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg)
+{
+ __IO uint32_t count = 0U;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ assert_param(IS_QSPI_INTERVAL(cfg->Interval));
+ assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
+ assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
+ assert_param(IS_QSPI_AUTOMATIC_STOP(cfg->AutomaticStop));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
+
+ /* Wait till BUSY flag reset */
+ count = (hqspi->Timeout) * (SystemCoreClock / 16U / 1000U);
+ do
+ {
+ if (count-- == 0)
+ {
+ hqspi->State = HAL_QSPI_STATE_ERROR;
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT;
+ status = HAL_TIMEOUT;
+ }
+ }
+ while ((__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY)) != RESET);
+
+ if (status == HAL_OK)
+ {
+ /* Configure QSPI: PSMAR register with the status match value */
+ WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
+
+ /* Configure QSPI: PSMKR register with the status mask value */
+ WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
+
+ /* Configure QSPI: PIR register with the interval value */
+ WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
+
+ /* Configure QSPI: CR register with Match mode and Automatic stop mode */
+ MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS),
+ (cfg->MatchMode | cfg->AutomaticStop));
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_SM);
+
+ /* Call the configuration function */
+ cmd->NbData = cfg->StatusBytesSize;
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI Transfer Error and status match Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, (QSPI_IT_SM | QSPI_IT_TE));
+
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Configure the Memory Mapped mode.
+ * @param hqspi: QSPI handle
+ * @param cmd: structure that contains the command configuration information.
+ * @param cfg: structure that contains the memory mapped configuration information.
+ * @note This function is used only in Memory mapped Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ assert_param(IS_QSPI_TIMEOUT_ACTIVATION(cfg->TimeOutActivation));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_MEM_MAPPED;
+
+ /* Wait till BUSY flag reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Configure QSPI: CR register with timeout counter enable */
+ MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_TCEN, cfg->TimeOutActivation);
+
+ if (cfg->TimeOutActivation == QSPI_TIMEOUT_COUNTER_ENABLE)
+ {
+ assert_param(IS_QSPI_TIMEOUT_PERIOD(cfg->TimeOutPeriod));
+
+ /* Configure QSPI: LPTR register with the low-power timeout value */
+ WRITE_REG(hqspi->Instance->LPTR, cfg->TimeOutPeriod);
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TO);
+
+ /* Enable the QSPI TimeOut Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TO);
+ }
+
+ /* Call the configuration function */
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Transfer Error callbacks
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_ErrorCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Abort completed callback.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_AbortCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_QSPI_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Command completed callback.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_CmdCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_CmdCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_RxCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+ __weak void HAL_QSPI_TxCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_RxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_RxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+ __weak void HAL_QSPI_TxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FIFO Threshold callbacks
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_FIFOThresholdCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Status Match callbacks
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_StatusMatchCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_StatusMatchCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timeout callbacks
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_TimeOutCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_TimeOutCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Exported_Functions_Group3 Peripheral Control and State functions
+ * @brief QSPI control and State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control and State functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Check in run-time the state of the driver.
+ (+) Check the error code set during last operation.
+ (+) Abort any operation.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the QSPI handle state.
+ * @param hqspi: QSPI handle
+ * @retval HAL state
+ */
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi)
+{
+ /* Return QSPI handle state */
+ return hqspi->State;
+}
+
+/**
+* @brief Return the QSPI error code
+* @param hqspi: QSPI handle
+* @retval QSPI Error Code
+*/
+uint32_t HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi)
+{
+ return hqspi->ErrorCode;
+}
+
+/**
+* @brief Abort the current transmission
+* @param hqspi: QSPI handle
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_QSPI_Abort(QSPI_HandleTypeDef *hqspi)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check if the state is in one of the busy states */
+ if ((hqspi->State & 0x2) != 0)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Abort DMA channel */
+ status = HAL_DMA_Abort(hqspi->hdma);
+ if(status != HAL_OK)
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA;
+ }
+ }
+
+ /* Configure QSPI: CR register with Abort request */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+
+ /* Wait until TC flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, hqspi->Timeout);
+
+ if(status == HAL_OK)
+ {
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Wait until BUSY flag is reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout);
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ }
+
+ return status;
+}
+
+/**
+* @brief Abort the current transmission (non-blocking function)
+* @param hqspi: QSPI handle
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_QSPI_Abort_IT(QSPI_HandleTypeDef *hqspi)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check if the state is in one of the busy states */
+ if ((hqspi->State & 0x2) != 0)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_ABORT;
+
+ /* Disable all interrupts */
+ __HAL_QSPI_DISABLE_IT(hqspi, (QSPI_IT_TO | QSPI_IT_SM | QSPI_IT_FT | QSPI_IT_TC | QSPI_IT_TE));
+
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Abort DMA channel */
+ hqspi->hdma->XferAbortCallback = QSPI_DMAAbortCplt;
+ HAL_DMA_Abort_IT(hqspi->hdma);
+ }
+ else
+ {
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Enable the QSPI Transfer Complete Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
+
+ /* Configure QSPI: CR register with Abort request */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+ }
+ }
+
+ return status;
+}
+
+/** @brief Set QSPI timeout
+ * @param hqspi: QSPI handle.
+ * @param Timeout: Timeout for the QSPI memory access.
+ * @retval None
+ */
+void HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout)
+{
+ hqspi->Timeout = Timeout;
+}
+
+/** @brief Set QSPI Fifo threshold.
+ * @param hqspi: QSPI handle.
+ * @param Threshold: Threshold of the Fifo (value between 1 and 16).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ /* Synchronize init structure with new FIFO threshold value */
+ hqspi->Init.FifoThreshold = Threshold;
+
+ /* Configure QSPI FIFO Threshold */
+ MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES,
+ ((hqspi->Init.FifoThreshold - 1) << POSITION_VAL(QUADSPI_CR_FTHRES)));
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/** @brief Get QSPI Fifo threshold.
+ * @param hqspi: QSPI handle.
+ * @retval Fifo threshold (value between 1 and 16)
+ */
+uint32_t HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi)
+{
+ return ((READ_BIT(hqspi->Instance->CR, QUADSPI_CR_FTHRES) >> POSITION_VAL(QUADSPI_CR_FTHRES)) + 1);
+}
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+ * @brief DMA QSPI receive process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hqspi->RxXferCount = 0;
+
+ /* Enable the QSPI transfer complete Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
+}
+
+/**
+ * @brief DMA QSPI transmit process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hqspi->TxXferCount = 0;
+
+ /* Enable the QSPI transfer complete Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
+}
+
+/**
+ * @brief DMA QSPI receive process half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_QSPI_RxHalfCpltCallback(hqspi);
+}
+
+/**
+ * @brief DMA QSPI transmit process half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_QSPI_TxHalfCpltCallback(hqspi);
+}
+
+/**
+ * @brief DMA QSPI communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void QSPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* if DMA error is FIFO error ignore it */
+ if(HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE)
+ {
+ hqspi->RxXferCount = 0;
+ hqspi->TxXferCount = 0;
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA;
+
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Abort the QSPI */
+ HAL_QSPI_Abort_IT(hqspi);
+ }
+}
+
+/**
+ * @brief DMA QSPI abort complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void QSPI_DMAAbortCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ hqspi->RxXferCount = 0;
+ hqspi->TxXferCount = 0;
+
+ if(hqspi->State == HAL_QSPI_STATE_ABORT)
+ {
+ /* DMA Abort called by QSPI abort */
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Enable the QSPI Transfer Complete Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
+
+ /* Configure QSPI: CR register with Abort request */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+ }
+ else
+ {
+ /* DMA Abort called due to a transfer error interrupt */
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* Error callback */
+ HAL_QSPI_ErrorCallback(hqspi);
+ }
+}
+/**
+ * @brief Wait for a flag state until timeout.
+ * @param hqspi: QSPI handle
+ * @param Flag: Flag checked
+ * @param State: Value of the flag expected
+ * @param Timeout: Duration of the time out
+ * @param tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag,
+ FlagStatus State, uint32_t tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is in expected state */
+ while((FlagStatus)(__HAL_QSPI_GET_FLAG(hqspi, Flag)) != State)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hqspi->State = HAL_QSPI_STATE_ERROR;
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT;
+
+ return HAL_ERROR;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the communication registers.
+ * @param hqspi: QSPI handle
+ * @param cmd: structure that contains the command configuration information
+ * @param FunctionalMode: functional mode to configured
+ * This parameter can be one of the following values:
+ * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE: Indirect write mode
+ * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_READ: Indirect read mode
+ * @arg QSPI_FUNCTIONAL_MODE_AUTO_POLLING: Automatic polling mode
+ * @arg QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED: Memory-mapped mode
+ * @retval None
+ */
+static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode)
+{
+ assert_param(IS_QSPI_FUNCTIONAL_MODE(FunctionalMode));
+
+ if ((cmd->DataMode != QSPI_DATA_NONE) && (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
+ {
+ /* Configure QSPI: DLR register with the number of data to read or write */
+ WRITE_REG(hqspi->Instance->DLR, (cmd->NbData - 1));
+ }
+
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ /* Configure QSPI: ABR register with alternate bytes value */
+ WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
+
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ /*---- Command with instruction, address and alternate bytes ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+ cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
+ cmd->InstructionMode | cmd->Instruction | FunctionalMode));
+
+ if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+ {
+ /* Configure QSPI: AR register with address value */
+ WRITE_REG(hqspi->Instance->AR, cmd->Address);
+ }
+ }
+ else
+ {
+ /*---- Command with instruction and alternate bytes ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+ cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode |
+ cmd->Instruction | FunctionalMode));
+ }
+ }
+ else
+ {
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ /*---- Command with instruction and address ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+ cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode |
+ cmd->Instruction | FunctionalMode));
+
+ if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+ {
+ /* Configure QSPI: AR register with address value */
+ WRITE_REG(hqspi->Instance->AR, cmd->Address);
+ }
+ }
+ else
+ {
+ /*---- Command with only instruction ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+ cmd->AddressMode | cmd->InstructionMode | cmd->Instruction |
+ FunctionalMode));
+ }
+ }
+ }
+ else
+ {
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ /* Configure QSPI: ABR register with alternate bytes value */
+ WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
+
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ /*---- Command with address and alternate bytes ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+ cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
+ cmd->InstructionMode | FunctionalMode));
+
+ if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+ {
+ /* Configure QSPI: AR register with address value */
+ WRITE_REG(hqspi->Instance->AR, cmd->Address);
+ }
+ }
+ else
+ {
+ /*---- Command with only alternate bytes ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+ cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode |
+ FunctionalMode));
+ }
+ }
+ else
+ {
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ /*---- Command with only address ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+ cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode |
+ FunctionalMode));
+
+ if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+ {
+ /* Configure QSPI: AR register with address value */
+ WRITE_REG(hqspi->Instance->AR, cmd->Address);
+ }
+ }
+ else
+ {
+ /*---- Command with only data phase ----*/
+ if (cmd->DataMode != QSPI_DATA_NONE)
+ {
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+ cmd->AddressMode | cmd->InstructionMode | FunctionalMode));
+ }
+ }
+ }
+ }
+}
+/**
+ * @}
+ */
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx */
+
+#endif /* HAL_QSPI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,784 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_qspi.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of QSPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_QSPI_H
+#define __STM32F4xx_HAL_QSPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup QSPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Types QSPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief QSPI Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t ClockPrescaler; /* Specifies the prescaler factor for generating clock based on the AHB clock.
+ This parameter can be a number between 0 and 255 */
+
+ uint32_t FifoThreshold; /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode)
+ This parameter can be a value between 1 and 32 */
+
+ uint32_t SampleShifting; /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to
+ take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode)
+ This parameter can be a value of @ref QSPI_SampleShifting */
+
+ uint32_t FlashSize; /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits
+ required to address the flash memory. The flash capacity can be up to 4GB
+ (addressed using 32 bits) in indirect mode, but the addressable space in
+ memory-mapped mode is limited to 256MB
+ This parameter can be a number between 0 and 31 */
+
+ uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number
+ of clock cycles which the chip select must remain high between commands.
+ This parameter can be a value of @ref QSPI_ChipSelectHighTime */
+
+ uint32_t ClockMode; /* Specifies the Clock Mode. It indicates the level that clock takes between commands.
+ This parameter can be a value of @ref QSPI_ClockMode */
+
+ uint32_t FlashID; /* Specifies the Flash which will be used,
+ This parameter can be a value of @ref QSPI_Flash_Select */
+
+ uint32_t DualFlash; /* Specifies the Dual Flash Mode State
+ This parameter can be a value of @ref QSPI_DualFlash_Mode */
+}QSPI_InitTypeDef;
+
+/**
+ * @brief HAL QSPI State structures definition
+ */
+typedef enum
+{
+ HAL_QSPI_STATE_RESET = 0x00U, /*!< Peripheral not initialized */
+ HAL_QSPI_STATE_READY = 0x01U, /*!< Peripheral initialized and ready for use */
+ HAL_QSPI_STATE_BUSY = 0x02U, /*!< Peripheral in indirect mode and busy */
+ HAL_QSPI_STATE_BUSY_INDIRECT_TX = 0x12U, /*!< Peripheral in indirect mode with transmission ongoing */
+ HAL_QSPI_STATE_BUSY_INDIRECT_RX = 0x22U, /*!< Peripheral in indirect mode with reception ongoing */
+ HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42U, /*!< Peripheral in auto polling mode ongoing */
+ HAL_QSPI_STATE_BUSY_MEM_MAPPED = 0x82U, /*!< Peripheral in memory mapped mode ongoing */
+ HAL_QSPI_STATE_ABORT = 0x08U, /*!< Peripheral with abort request ongoing */
+ HAL_QSPI_STATE_ERROR = 0x04U /*!< Peripheral in error */
+}HAL_QSPI_StateTypeDef;
+
+/**
+ * @brief QSPI Handle Structure definition
+ */
+typedef struct
+{
+ QUADSPI_TypeDef *Instance; /* QSPI registers base address */
+ QSPI_InitTypeDef Init; /* QSPI communication parameters */
+ uint8_t *pTxBuffPtr; /* Pointer to QSPI Tx transfer Buffer */
+ __IO uint16_t TxXferSize; /* QSPI Tx Transfer size */
+ __IO uint16_t TxXferCount; /* QSPI Tx Transfer Counter */
+ uint8_t *pRxBuffPtr; /* Pointer to QSPI Rx transfer Buffer */
+ __IO uint16_t RxXferSize; /* QSPI Rx Transfer size */
+ __IO uint16_t RxXferCount; /* QSPI Rx Transfer Counter */
+ DMA_HandleTypeDef *hdma; /* QSPI Rx/Tx DMA Handle parameters */
+ __IO HAL_LockTypeDef Lock; /* Locking object */
+ __IO HAL_QSPI_StateTypeDef State; /* QSPI communication state */
+ __IO uint32_t ErrorCode; /* QSPI Error code */
+ uint32_t Timeout; /* Timeout for the QSPI memory access */
+}QSPI_HandleTypeDef;
+
+/**
+ * @brief QSPI Command structure definition
+ */
+typedef struct
+{
+ uint32_t Instruction; /* Specifies the Instruction to be sent
+ This parameter can be a value (8-bit) between 0x00 and 0xFF */
+ uint32_t Address; /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize)
+ This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFFU */
+ uint32_t AlternateBytes; /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize)
+ This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFFU */
+ uint32_t AddressSize; /* Specifies the Address Size
+ This parameter can be a value of @ref QSPI_AddressSize */
+ uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size
+ This parameter can be a value of @ref QSPI_AlternateBytesSize */
+ uint32_t DummyCycles; /* Specifies the Number of Dummy Cycles.
+ This parameter can be a number between 0 and 31 */
+ uint32_t InstructionMode; /* Specifies the Instruction Mode
+ This parameter can be a value of @ref QSPI_InstructionMode */
+ uint32_t AddressMode; /* Specifies the Address Mode
+ This parameter can be a value of @ref QSPI_AddressMode */
+ uint32_t AlternateByteMode; /* Specifies the Alternate Bytes Mode
+ This parameter can be a value of @ref QSPI_AlternateBytesMode */
+ uint32_t DataMode; /* Specifies the Data Mode (used for dummy cycles and data phases)
+ This parameter can be a value of @ref QSPI_DataMode */
+ uint32_t NbData; /* Specifies the number of data to transfer.
+ This parameter can be any value between 0 and 0xFFFFFFFFU (0 means undefined length
+ until end of memory)*/
+ uint32_t DdrMode; /* Specifies the double data rate mode for address, alternate byte and data phase
+ This parameter can be a value of @ref QSPI_DdrMode */
+ uint32_t DdrHoldHalfCycle; /* Specifies the DDR hold half cycle. It delays the data output by one half of
+ system clock in DDR mode.
+ This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */
+ uint32_t SIOOMode; /* Specifies the send instruction only once mode
+ This parameter can be a value of @ref QSPI_SIOOMode */
+}QSPI_CommandTypeDef;
+
+/**
+ * @brief QSPI Auto Polling mode configuration structure definition
+ */
+typedef struct
+{
+ uint32_t Match; /* Specifies the value to be compared with the masked status register to get a match.
+ This parameter can be any value between 0 and 0xFFFFFFFFU */
+ uint32_t Mask; /* Specifies the mask to be applied to the status bytes received.
+ This parameter can be any value between 0 and 0xFFFFFFFFU */
+ uint32_t Interval; /* Specifies the number of clock cycles between two read during automatic polling phases.
+ This parameter can be any value between 0 and 0xFFFFU */
+ uint32_t StatusBytesSize; /* Specifies the size of the status bytes received.
+ This parameter can be any value between 1 and 4 */
+ uint32_t MatchMode; /* Specifies the method used for determining a match.
+ This parameter can be a value of @ref QSPI_MatchMode */
+ uint32_t AutomaticStop; /* Specifies if automatic polling is stopped after a match.
+ This parameter can be a value of @ref QSPI_AutomaticStop */
+}QSPI_AutoPollingTypeDef;
+
+/**
+ * @brief QSPI Memory Mapped mode configuration structure definition
+ */
+typedef struct
+{
+ uint32_t TimeOutPeriod; /* Specifies the number of clock to wait when the FIFO is full before to release the chip select.
+ This parameter can be any value between 0 and 0xFFFFU */
+ uint32_t TimeOutActivation; /* Specifies if the time out counter is enabled to release the chip select.
+ This parameter can be a value of @ref QSPI_TimeOutActivation */
+}QSPI_MemoryMappedTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Constants QSPI Exported Constants
+ * @{
+ */
+/** @defgroup QSPI_ErrorCode QSPI Error Code
+ * @{
+ */
+#define HAL_QSPI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_QSPI_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */
+#define HAL_QSPI_ERROR_TRANSFER ((uint32_t)0x00000002U) /*!< Transfer error */
+#define HAL_QSPI_ERROR_DMA ((uint32_t)0x00000004U) /*!< DMA transfer error */
+#define HAL_QSPI_ERROR_INVALID_PARAM ((uint32_t)0x00000008U) /*!< Invalid parameters error */
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_SampleShifting QSPI Sample Shifting
+ * @{
+ */
+#define QSPI_SAMPLE_SHIFTING_NONE ((uint32_t)0x00000000U) /*!<No clock cycle shift to sample data*/
+#define QSPI_SAMPLE_SHIFTING_HALFCYCLE ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_ChipSelectHighTime QSPI Chip Select High Time
+ * @{
+ */
+#define QSPI_CS_HIGH_TIME_1_CYCLE ((uint32_t)0x00000000U) /*!<nCS stay high for at least 1 clock cycle between commands*/
+#define QSPI_CS_HIGH_TIME_2_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 2 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_3_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 3 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_4_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_5_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2) /*!<nCS stay high for at least 5 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_6_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_7_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_8_CYCLE ((uint32_t)QUADSPI_DCR_CSHT) /*!<nCS stay high for at least 8 clock cycles between commands*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_ClockMode QSPI Clock Mode
+ * @{
+ */
+#define QSPI_CLOCK_MODE_0 ((uint32_t)0x00000000U) /*!<Clk stays low while nCS is released*/
+#define QSPI_CLOCK_MODE_3 ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Flash_Select QSPI Flash Select
+ * @{
+ */
+#define QSPI_FLASH_ID_1 ((uint32_t)0x00000000U)
+#define QSPI_FLASH_ID_2 ((uint32_t)QUADSPI_CR_FSEL)
+/**
+ * @}
+ */
+
+ /** @defgroup QSPI_DualFlash_Mode QSPI Dual Flash Mode
+ * @{
+ */
+#define QSPI_DUALFLASH_ENABLE ((uint32_t)QUADSPI_CR_DFM)
+#define QSPI_DUALFLASH_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AddressSize QSPI Address Size
+ * @{
+ */
+#define QSPI_ADDRESS_8_BITS ((uint32_t)0x00000000U) /*!<8-bit address*/
+#define QSPI_ADDRESS_16_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/
+#define QSPI_ADDRESS_24_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/
+#define QSPI_ADDRESS_32_BITS ((uint32_t)QUADSPI_CCR_ADSIZE) /*!<32-bit address*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size
+ * @{
+ */
+#define QSPI_ALTERNATE_BYTES_8_BITS ((uint32_t)0x00000000U) /*!<8-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_16_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_24_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_32_BITS ((uint32_t)QUADSPI_CCR_ABSIZE) /*!<32-bit alternate bytes*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_InstructionMode QSPI Instruction Mode
+* @{
+*/
+#define QSPI_INSTRUCTION_NONE ((uint32_t)0x00000000U) /*!<No instruction*/
+#define QSPI_INSTRUCTION_1_LINE ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/
+#define QSPI_INSTRUCTION_2_LINES ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/
+#define QSPI_INSTRUCTION_4_LINES ((uint32_t)QUADSPI_CCR_IMODE) /*!<Instruction on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AddressMode QSPI Address Mode
+* @{
+*/
+#define QSPI_ADDRESS_NONE ((uint32_t)0x00000000U) /*!<No address*/
+#define QSPI_ADDRESS_1_LINE ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/
+#define QSPI_ADDRESS_2_LINES ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/
+#define QSPI_ADDRESS_4_LINES ((uint32_t)QUADSPI_CCR_ADMODE) /*!<Address on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AlternateBytesMode QSPI Alternate Bytes Mode
+* @{
+*/
+#define QSPI_ALTERNATE_BYTES_NONE ((uint32_t)0x00000000U) /*!<No alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_1_LINE ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/
+#define QSPI_ALTERNATE_BYTES_2_LINES ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/
+#define QSPI_ALTERNATE_BYTES_4_LINES ((uint32_t)QUADSPI_CCR_ABMODE) /*!<Alternate bytes on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DataMode QSPI Data Mode
+ * @{
+ */
+#define QSPI_DATA_NONE ((uint32_t)0x00000000U) /*!<No data*/
+#define QSPI_DATA_1_LINE ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/
+#define QSPI_DATA_2_LINES ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/
+#define QSPI_DATA_4_LINES ((uint32_t)QUADSPI_CCR_DMODE) /*!<Data on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DdrMode QSPI Ddr Mode
+ * @{
+ */
+#define QSPI_DDR_MODE_DISABLE ((uint32_t)0x00000000U) /*!<Double data rate mode disabled*/
+#define QSPI_DDR_MODE_ENABLE ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DdrHoldHalfCycle QSPI Ddr HoldHalfCycle
+ * @{
+ */
+#define QSPI_DDR_HHC_ANALOG_DELAY ((uint32_t)0x00000000U) /*!<Delay the data output using analog delay in DDR mode*/
+#define QSPI_DDR_HHC_HALF_CLK_DELAY ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by 1/2 clock cycle in DDR mode*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_SIOOMode QSPI SIOO Mode
+ * @{
+ */
+#define QSPI_SIOO_INST_EVERY_CMD ((uint32_t)0x00000000U) /*!<Send instruction on every transaction*/
+#define QSPI_SIOO_INST_ONLY_FIRST_CMD ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_MatchMode QSPI Match Mode
+ * @{
+ */
+#define QSPI_MATCH_MODE_AND ((uint32_t)0x00000000U) /*!<AND match mode between unmasked bits*/
+#define QSPI_MATCH_MODE_OR ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop
+ * @{
+ */
+#define QSPI_AUTOMATIC_STOP_DISABLE ((uint32_t)0x00000000U) /*!<AutoPolling stops only with abort or QSPI disabling*/
+#define QSPI_AUTOMATIC_STOP_ENABLE ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_TimeOutActivation QSPI TimeOut Activation
+ * @{
+ */
+#define QSPI_TIMEOUT_COUNTER_DISABLE ((uint32_t)0x00000000U) /*!<Timeout counter disabled, nCS remains active*/
+#define QSPI_TIMEOUT_COUNTER_ENABLE ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Flags QSPI Flags
+ * @{
+ */
+#define QSPI_FLAG_BUSY QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/
+#define QSPI_FLAG_TO QUADSPI_SR_TOF /*!<Timeout flag: timeout occurs in memory-mapped mode*/
+#define QSPI_FLAG_SM QUADSPI_SR_SMF /*!<Status match flag: received data matches in autopolling mode*/
+#define QSPI_FLAG_FT QUADSPI_SR_FTF /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/
+#define QSPI_FLAG_TC QUADSPI_SR_TCF /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/
+#define QSPI_FLAG_TE QUADSPI_SR_TEF /*!<Transfer error flag: invalid address is being accessed*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Interrupts QSPI Interrupts
+ * @{
+ */
+#define QSPI_IT_TO QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/
+#define QSPI_IT_SM QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/
+#define QSPI_IT_FT QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/
+#define QSPI_IT_TC QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/
+#define QSPI_IT_TE QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Timeout_definition QSPI Timeout definition
+ * @{
+ */
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000U)/* 5 s */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Macros QSPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset QSPI handle state
+ * @param __HANDLE__: QSPI handle.
+ * @retval None
+ */
+#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_QSPI_STATE_RESET)
+
+/** @brief Enable QSPI
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @retval None
+ */
+#define __HAL_QSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief Disable QSPI
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @retval None
+ */
+#define __HAL_QSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief Enables the specified QSPI interrupt.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Time out interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval None
+ */
+#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+
+/** @brief Disables the specified QSPI interrupt.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Timeout interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval None
+ */
+#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+/** @brief Checks whether the specified QSPI interrupt source is enabled.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Time out interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Get the selected QSPI's flag status.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __FLAG__: specifies the QSPI flag to check.
+ * This parameter can be one of the following values:
+ * @arg QSPI_FLAG_BUSY: QSPI Busy flag
+ * @arg QSPI_FLAG_TO: QSPI Time out flag
+ * @arg QSPI_FLAG_SM: QSPI Status match flag
+ * @arg QSPI_FLAG_FT: QSPI FIFO threshold flag
+ * @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+ * @arg QSPI_FLAG_TE: QSPI Transfer error flag
+ * @retval None
+ */
+#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0U)
+
+/** @brief Clears the specified QSPI's flag status.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __FLAG__: specifies the QSPI clear register flag that needs to be set
+ * This parameter can be one of the following values:
+ * @arg QSPI_FLAG_TO: QSPI Time out flag
+ * @arg QSPI_FLAG_SM: QSPI Status match flag
+ * @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+ * @arg QSPI_FLAG_TE: QSPI Transfer error flag
+ * @retval None
+ */
+#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup QSPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_QSPI_Init (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_DeInit (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_MspInit (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi);
+/**
+ * @}
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+/* QSPI IRQ handler method */
+void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+HAL_StatusTypeDef HAL_QSPI_Command (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Transmit (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Receive (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Command_IT (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd);
+HAL_StatusTypeDef HAL_QSPI_Transmit_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Receive_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Receive_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+
+/* QSPI status flag polling mode */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg);
+
+/* QSPI memory-mapped mode */
+HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg);
+/**
+ * @}
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group3
+ * @{
+ */
+/* Callback functions in non-blocking modes ***********************************/
+void HAL_QSPI_ErrorCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_AbortCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+void HAL_QSPI_CmdCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_RxCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_TxCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_RxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_TxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI status flag polling mode */
+void HAL_QSPI_StatusMatchCallback (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI memory-mapped mode */
+void HAL_QSPI_TimeOutCallback (QSPI_HandleTypeDef *hqspi);
+/**
+ * @}
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState (QSPI_HandleTypeDef *hqspi);
+uint32_t HAL_QSPI_GetError (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_Abort (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_Abort_IT (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_SetTimeout (QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold);
+uint32_t HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi);
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup QSPI_Private_Macros QSPI Private Macros
+ * @{
+ */
+/** @defgroup QSPI_ClockPrescaler QSPI Clock Prescaler
+ * @{
+ */
+#define IS_QSPI_CLOCK_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFU)
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_FifoThreshold QSPI Fifo Threshold
+ * @{
+ */
+#define IS_QSPI_FIFO_THRESHOLD(THR) (((THR) > 0U) && ((THR) <= 32U))
+/**
+ * @}
+ */
+
+#define IS_QSPI_SSHIFT(SSHIFT) (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \
+ ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE))
+
+/** @defgroup QSPI_FlashSize QSPI Flash Size
+ * @{
+ */
+#define IS_QSPI_FLASH_SIZE(FSIZE) (((FSIZE) <= 31U))
+/**
+ * @}
+ */
+
+#define IS_QSPI_CS_HIGH_TIME(CSHTIME) (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE))
+
+#define IS_QSPI_CLOCK_MODE(CLKMODE) (((CLKMODE) == QSPI_CLOCK_MODE_0) || \
+ ((CLKMODE) == QSPI_CLOCK_MODE_3))
+
+#define IS_QSPI_FLASH_ID(FLA) (((FLA) == QSPI_FLASH_ID_1) || \
+ ((FLA) == QSPI_FLASH_ID_2))
+
+#define IS_QSPI_DUAL_FLASH_MODE(MODE) (((MODE) == QSPI_DUALFLASH_ENABLE) || \
+ ((MODE) == QSPI_DUALFLASH_DISABLE))
+
+
+/** @defgroup QSPI_Instruction QSPI Instruction
+ * @{
+ */
+#define IS_QSPI_INSTRUCTION(INSTRUCTION) ((INSTRUCTION) <= 0xFFU)
+/**
+ * @}
+ */
+
+#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE) (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS))
+
+#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE) (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS))
+
+
+/** @defgroup QSPI_DummyCycles QSPI Dummy Cycles
+ * @{
+ */
+#define IS_QSPI_DUMMY_CYCLES(DCY) ((DCY) <= 31U)
+/**
+ * @}
+ */
+
+#define IS_QSPI_INSTRUCTION_MODE(MODE) (((MODE) == QSPI_INSTRUCTION_NONE) || \
+ ((MODE) == QSPI_INSTRUCTION_1_LINE) || \
+ ((MODE) == QSPI_INSTRUCTION_2_LINES) || \
+ ((MODE) == QSPI_INSTRUCTION_4_LINES))
+
+#define IS_QSPI_ADDRESS_MODE(MODE) (((MODE) == QSPI_ADDRESS_NONE) || \
+ ((MODE) == QSPI_ADDRESS_1_LINE) || \
+ ((MODE) == QSPI_ADDRESS_2_LINES) || \
+ ((MODE) == QSPI_ADDRESS_4_LINES))
+
+#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE) (((MODE) == QSPI_ALTERNATE_BYTES_NONE) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES))
+
+#define IS_QSPI_DATA_MODE(MODE) (((MODE) == QSPI_DATA_NONE) || \
+ ((MODE) == QSPI_DATA_1_LINE) || \
+ ((MODE) == QSPI_DATA_2_LINES) || \
+ ((MODE) == QSPI_DATA_4_LINES))
+
+#define IS_QSPI_DDR_MODE(DDR_MODE) (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \
+ ((DDR_MODE) == QSPI_DDR_MODE_ENABLE))
+
+#define IS_QSPI_DDR_HHC(DDR_HHC) (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \
+ ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY))
+
+#define IS_QSPI_SIOO_MODE(SIOO_MODE) (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \
+ ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD))
+
+/** @defgroup QSPI_Interval QSPI Interval
+ * @{
+ */
+#define IS_QSPI_INTERVAL(INTERVAL) ((INTERVAL) <= QUADSPI_PIR_INTERVAL)
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_StatusBytesSize QSPI Status Bytes Size
+ * @{
+ */
+#define IS_QSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1U) && ((SIZE) <= 4U))
+/**
+ * @}
+ */
+#define IS_QSPI_MATCH_MODE(MODE) (((MODE) == QSPI_MATCH_MODE_AND) || \
+ ((MODE) == QSPI_MATCH_MODE_OR))
+
+#define IS_QSPI_AUTOMATIC_STOP(APMS) (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \
+ ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE))
+
+#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN) (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \
+ ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE))
+
+/** @defgroup QSPI_TimeOutPeriod QSPI TimeOut Period
+ * @{
+ */
+#define IS_QSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFFU)
+/**
+ * @}
+ */
+
+#define IS_QSPI_GET_FLAG(FLAG) (((FLAG) == QSPI_FLAG_BUSY) || \
+ ((FLAG) == QSPI_FLAG_TO) || \
+ ((FLAG) == QSPI_FLAG_SM) || \
+ ((FLAG) == QSPI_FLAG_FT) || \
+ ((FLAG) == QSPI_FLAG_TC) || \
+ ((FLAG) == QSPI_FLAG_TE))
+
+#define IS_QSPI_IT(IT) ((((IT) & (uint32_t)0xFFE0FFFFU) == 0x00000000U) && ((IT) != 0x00000000U))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Functions QSPI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_QSPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1108 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Reset and Clock Control (RCC) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### RCC specific features #####
+ ==============================================================================
+ [..]
+ After reset the device is running from Internal High Speed oscillator
+ (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
+ and I-Cache are disabled, and all peripherals are off except internal
+ SRAM, Flash and JTAG.
+ (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
+ all peripherals mapped on these busses are running at HSI speed.
+ (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+ (+) All GPIOs are in input floating state, except the JTAG pins which
+ are assigned to be used for debug purpose.
+
+ [..]
+ Once the device started from reset, the user application has to:
+ (+) Configure the clock source to be used to drive the System clock
+ (if the application needs higher frequency/performance)
+ (+) Configure the System clock frequency and Flash settings
+ (+) Configure the AHB and APB busses prescalers
+ (+) Enable the clock for the peripheral(s) to be used
+ (+) Configure the clock source(s) for peripherals which clocks are not
+ derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
+
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
+ after the clock enable bit is set on the hardware register
+ (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
+ after the clock enable bit is set on the hardware register
+
+ [..]
+ Implemented Workaround:
+ (+) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCC RCC
+ * @brief RCC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup RCC_Private_Constants
+ * @{
+ */
+#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000U) /* 5 s */
+
+/* Private macro -------------------------------------------------------------*/
+#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT GPIOA
+#define MCO1_PIN GPIO_PIN_8
+
+#define __MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
+#define MCO2_GPIO_PORT GPIOC
+#define MCO2_PIN GPIO_PIN_9
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+ * @{
+ */
+const uint8_t APBAHBPrescTable[16] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to configure the internal/external oscillators
+ (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1
+ and APB2).
+
+ [..] Internal/external clock and PLL configuration
+ (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
+ the PLL as System clock source.
+
+ (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
+ clock source.
+
+ (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
+ through the PLL as System clock source. Can be used also as RTC clock source.
+
+ (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+ (#) PLL (clocked by HSI or HSE), featuring two different output clocks:
+ (++) The first output is used to generate the high speed system clock (up to 168 MHz)
+ (++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
+ the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
+
+ (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
+ and if a HSE clock failure occurs(HSE used directly or through PLL as System
+ clock source), the System clocks automatically switched to HSI and an interrupt
+ is generated if enabled. The interrupt is linked to the Cortex-M4 NMI
+ (Non-Maskable Interrupt) exception vector.
+
+ (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
+ clock (through a configurable prescaler) on PA8 pin.
+
+ (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
+ clock (through a configurable prescaler) on PC9 pin.
+
+ [..] System, AHB and APB busses clocks configuration
+ (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+ HSE and PLL.
+ The AHB clock (HCLK) is derived from System clock through configurable
+ prescaler and used to clock the CPU, memory and peripherals mapped
+ on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
+ from AHB clock through configurable prescalers and used to clock
+ the peripherals mapped on these busses. You can use
+ "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+ (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum
+ frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz.
+ Depending on the device voltage range, the maximum frequency should
+ be adapted accordingly (refer to the product datasheets for more details).
+
+ (#) For the STM32F42xxx, STM32F43xxx, STM32F446xx, STM32F469xx and STM32F479xx devices,
+ the maximum frequency of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz.
+ Depending on the device voltage range, the maximum frequency should
+ be adapted accordingly (refer to the product datasheets for more details).
+
+ (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz,
+ PCLK2 84 MHz and PCLK1 42 MHz.
+ Depending on the device voltage range, the maximum frequency should
+ be adapted accordingly (refer to the product datasheets for more details).
+
+ (#) For the STM32F41xxx, the maximum frequency of the SYSCLK and HCLK is 100 MHz,
+ PCLK2 100 MHz and PCLK1 50 MHz.
+ Depending on the device voltage range, the maximum frequency should
+ be adapted accordingly (refer to the product datasheets for more details).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE and PLL OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO1 and MCO2 OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+__weak void HAL_RCC_DeInit(void)
+{}
+
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+ * supported by this API. User should request a transition to LSE Off
+ * first and then LSE On or LSE Bypass.
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this API. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+ /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+ /* Check the HSE State */
+ if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is bypassed or disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+ {
+ /* When HSI is used as system clock it will not disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Wait for Backup domain Write protection enable */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+ assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+ assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+ assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the main PLL clock source, multiplication and division factors. */
+ WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \
+ RCC_OscInitStruct->PLL.PLLM | \
+ (RCC_OscInitStruct->PLL.PLLN << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
+ (RCC_OscInitStruct->PLL.PLLQ << POSITION_VAL(RCC_PLLCFGR_PLLQ))));
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CPU, AHB and APB busses clocks according to the specified
+ * parameters in the RCC_ClkInitStruct.
+ * @param RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC peripheral.
+ * @param FLatency: FLASH Latency, this parameter depend on device selected
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated by HAL_RCC_GetHCLKFreq() function called within this function
+ *
+ * @note The HSI is used (enabled by hardware) as system clock source after
+ * startup from Reset, wake-up from STOP and STANDBY mode, or in case
+ * of failure of the HSE used directly or indirectly as system clock
+ * (if the Clock Security System CSS is enabled).
+ *
+ * @note A switch from one clock source to another occurs only if the target
+ * clock source is ready (clock stable after startup delay or PLL locked).
+ * If a clock source which is not yet ready is selected, the switch will
+ * occur when the clock source will be ready.
+ *
+ * @note Depending on the device voltage range, the software has to set correctly
+ * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
+ * (for more details refer to section above "Initialization/de-initialization functions")
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+ assert_param(IS_FLASH_LATENCY(FLatency));
+
+ /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+ must be correctly programmed according to the frequency of the CPU clock
+ (HCLK) and the supply voltage of the device. */
+
+ /* Increasing the number of wait states because of higher CPU frequency */
+ if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) ||
+ (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK))
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLRCLK)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+
+ /* Decreasing the number of wait states because of lower CPU frequency */
+ if(FLatency < (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- PCLK1 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
+ }
+
+ /*-------------------------- PCLK2 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U));
+ }
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HAL_RCC_GetSysClockFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> POSITION_VAL(RCC_CFGR_HPRE)];
+
+ /* Configure the source of time base considering new system clocks settings*/
+ HAL_InitTick (TICK_INT_PRIORITY);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief RCC clocks control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
+ * @note PA8/PC9 should be configured in alternate function mode.
+ * @param RCC_MCOx: specifies the output direction for the clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
+ * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
+ * @param RCC_MCOSource: specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+ * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
+ * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
+ * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+ * @param RCC_MCODiv: specifies the MCOx prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ * @note For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have
+ * at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
+ * @retval None
+ */
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCOx));
+ assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+ /* RCC_MCO1 */
+ if(RCC_MCOx == RCC_MCO1)
+ {
+ assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+
+ /* MCO1 Clock Enable */
+ __MCO1_CLK_ENABLE();
+
+ /* Configure the MCO1 pin in alternate function mode */
+ GPIO_InitStruct.Pin = MCO1_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+ HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
+
+ /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv));
+
+ /* This RCC MCO1 enable feature is available only on STM32F410xx devices */
+#if defined(RCC_CFGR_MCO1EN)
+ __HAL_RCC_MCO1_ENABLE();
+#endif /* RCC_CFGR_MCO1EN */
+ }
+#if defined(RCC_CFGR_MCO2)
+ else
+ {
+ assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
+
+ /* MCO2 Clock Enable */
+ __MCO2_CLK_ENABLE();
+
+ /* Configure the MCO2 pin in alternate function mode */
+ GPIO_InitStruct.Pin = MCO2_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+ HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
+
+ /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3U)));
+
+ /* This RCC MCO2 enable feature is available only on STM32F410Rx devices */
+#if defined(RCC_CFGR_MCO2EN)
+ __HAL_RCC_MCO2_ENABLE();
+#endif /* RCC_CFGR_MCO2EN */
+ }
+#endif /* RCC_CFGR_MCO2 */
+}
+
+/**
+ * @brief Enables the Clock Security System.
+ * @note If a failure is detected on the HSE oscillator clock, this oscillator
+ * is automatically disabled and an interrupt is generated to inform the
+ * software about the failure (Clock Security System Interrupt, CSSI),
+ * allowing the MCU to perform rescue operations. The CSSI is linked to
+ * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
+ * @retval None
+ */
+void HAL_RCC_EnableCSS(void)
+{
+ *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Clock Security System.
+ * @retval None
+ */
+void HAL_RCC_DisableCSS(void)
+{
+ *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Returns the SYSCLK frequency
+ *
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+ * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baudrate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ *
+ * @retval SYSCLK frequency
+ */
+__weak uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ uint32_t pllm = 0U, pllvco = 0U, pllp = 0U;
+ uint32_t sysclockfreq = 0U;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
+ {
+ sysclockfreq = HSE_VALUE;
+ break;
+ }
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock source */
+ {
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLP */
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+ if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1U) *2U);
+
+ sysclockfreq = pllvco/pllp;
+ break;
+ }
+ default:
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ }
+ return sysclockfreq;
+}
+
+/**
+ * @brief Returns the HCLK frequency
+ * @note Each time HCLK changes, this function must be called to update the
+ * right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated within this function
+ * @retval HCLK frequency
+ */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+ return SystemCoreClock;
+}
+
+/**
+ * @brief Returns the PCLK1 frequency
+ * @note Each time PCLK1 changes, this function must be called to update the
+ * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK1 frequency
+ */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+ /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> POSITION_VAL(RCC_CFGR_PPRE1)]);
+}
+
+/**
+ * @brief Returns the PCLK2 frequency
+ * @note Each time PCLK2 changes, this function must be called to update the
+ * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK2 frequency
+ */
+uint32_t HAL_RCC_GetPCLK2Freq(void)
+{
+ /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq()>> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> POSITION_VAL(RCC_CFGR_PPRE2)]);
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+ /* Get the HSE configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+ }
+ else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+ }
+
+ /* Get the HSI configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+
+ /* Get the LSE configuration -----------------------------------------------*/
+ if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+ }
+ else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+ }
+
+ /* Get the LSI configuration -----------------------------------------------*/
+ if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+ }
+
+ /* Get the PLL configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+ }
+ RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+ RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+ RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
+ RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
+ RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
+}
+
+/**
+ * @brief Configures the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that
+ * will be configured.
+ * @param pFLatency: Pointer on the Flash Latency.
+ * @retval None
+ */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+ /* Set all possible values for the Clock type parameter --------------------*/
+ RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+
+ /* Get the SYSCLK configuration --------------------------------------------*/
+ RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+
+ /* Get the HCLK configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+ /* Get the APB1 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
+
+ /* Get the APB2 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U);
+
+ /* Get the Flash Wait State (Latency) configuration ------------------------*/
+ *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
+}
+
+/**
+ * @brief This function handles the RCC CSS interrupt request.
+ * @note This API should be called under the NMI_Handler().
+ * @retval None
+ */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+ /* Check RCC CSSF flag */
+ if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+ {
+ /* RCC Clock Security System interrupt user callback */
+ HAL_RCC_CSSCallback();
+
+ /* Clear RCC CSS pending bit */
+ __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+ }
+}
+
+/**
+ * @brief RCC Clock Security System interrupt callback
+ * @retval None
+ */
+__weak void HAL_RCC_CSSCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RCC_CSSCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1424 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_H
+#define __STM32F4xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/* Include RCC HAL Extended module */
+/* (include on top of file since RCC structures are defined in extended file) */
+#include "stm32f4xx_hal_rcc_ex.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000U)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001U)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002U)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004U)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint8_t)0x00U)
+#define RCC_HSE_ON ((uint8_t)0x01U)
+#define RCC_HSE_BYPASS ((uint8_t)0x05U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config LSE Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint8_t)0x00U)
+#define RCC_LSE_ON ((uint8_t)0x01U)
+#define RCC_LSE_BYPASS ((uint8_t)0x05U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint8_t)0x00U)
+#define RCC_HSI_ON ((uint8_t)0x01U)
+
+#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10U) /* Default HSI calibration trimming value */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint8_t)0x00U)
+#define RCC_LSI_ON ((uint8_t)0x01U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint8_t)0x00U)
+#define RCC_PLL_OFF ((uint8_t)0x01U)
+#define RCC_PLL_ON ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
+ * @{
+ */
+#define RCC_PLLP_DIV2 ((uint32_t)0x00000002U)
+#define RCC_PLLP_DIV4 ((uint32_t)0x00000004U)
+#define RCC_PLLP_DIV6 ((uint32_t)0x00000006U)
+#define RCC_PLLP_DIV8 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI
+#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001U)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002U)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004U)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+#define RCC_SYSCLKSOURCE_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SWS_0 | RCC_CFGR_SWS_1)) /*!< PLLR used as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100U)
+#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200U)
+#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO_Index MCO Index
+ * @{
+ */
+#define RCC_MCO1 ((uint32_t)0x00000000U)
+#define RCC_MCO2 ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000U)
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
+#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler
+ * @{
+ */
+#define RCC_MCODIV_1 ((uint32_t)0x00000000U)
+#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
+#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt Interrupts
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01U)
+#define RCC_IT_LSERDY ((uint8_t)0x02U)
+#define RCC_IT_HSIRDY ((uint8_t)0x04U)
+#define RCC_IT_HSERDY ((uint8_t)0x08U)
+#define RCC_IT_PLLRDY ((uint8_t)0x10U)
+#define RCC_IT_PLLI2SRDY ((uint8_t)0x20U)
+#define RCC_IT_CSS ((uint8_t)0x80U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag Flags
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - 0XX : Register index
+ * - 01: CR register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21U)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31U)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39U)
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3BU)
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)0x41U)
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61U)
+#define RCC_FLAG_BORRST ((uint8_t)0x79U)
+#define RCC_FLAG_PINRST ((uint8_t)0x7AU)
+#define RCC_FLAG_PORRST ((uint8_t)0x7BU)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7CU)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7DU)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7EU)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7FU)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
+#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) != RESET)
+
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) == RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_PWR_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
+
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
+
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
+#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
+
+#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U)
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
+#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U)
+#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U)
+#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
+
+#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
+
+#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
+
+#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wake-up from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value.
+ * (default is RCC_HSICALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\
+ RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE)
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro.
+ * User should request a transition to HSE Off first and then HSE On or HSE Bypass.
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator.
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_CR_BYTE2_ADDRESS = (__STATE__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
+ * User should request a transition to LSE Off first and then LSE On or LSE Bypass.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator.
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_BDCR_BYTE0_ADDRESS = (__STATE__))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE)
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE)
+
+/** @brief Macros to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wake-up source.
+ * However, when the HSE clock is used as RTC clock source, the RTC
+ * cannot be used in STOP and STANDBY modes.
+ * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
+ * RTC clock source).
+ */
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFFU)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
+ RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \
+ } while (0)
+
+/** @brief Macros to force or release the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE)
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE)
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE)
+
+/** @brief Macro to configure the PLL clock source.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLSOURCE__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ *
+ */
+#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
+
+/** @brief Macro to configure the PLL multiplication factor.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ *
+ */
+#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+ * @{
+ */
+/**
+ * @brief Macro to configure the system clock source.
+ * @param __RCC_SYSCLKSOURCE__: specifies the system clock source.
+ * This parameter can be one of the following values:
+ * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
+ * - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source.
+ */
+#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock.
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the MCO1 clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ */
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+
+/** @brief Macro to configure the MCO2 clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
+ * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
+ * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ * @note For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have
+ * at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
+ */
+#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
+
+/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
+ * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
+ * @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
+ * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
+ * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
+ * @arg RCC_FLAG_PINRST: Pin reset.
+ * @arg RCC_FLAG_PORRST: POR/PDR reset.
+ * @arg RCC_FLAG_SFTRST: Software reset.
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
+ * @arg RCC_FLAG_LPWRRST: Low Power reset.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint8_t)0x1FU)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR :((((__FLAG__) >> 5U) == 3U)? RCC->CSR :RCC->CIR))) & ((uint32_t)1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+ /** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CSSCallback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+/* Alias word address of HSION bit */
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00U)
+#define RCC_HSION_BIT_NUMBER 0x00U
+#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_HSION_BIT_NUMBER * 4U))
+/* Alias word address of CSSON bit */
+#define RCC_CSSON_BIT_NUMBER 0x13U
+#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_CSSON_BIT_NUMBER * 4U))
+/* Alias word address of PLLON bit */
+#define RCC_PLLON_BIT_NUMBER 0x18U
+#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLON_BIT_NUMBER * 4U))
+
+/* --- BDCR Register ---*/
+/* Alias word address of RTCEN bit */
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70U)
+#define RCC_RTCEN_BIT_NUMBER 0x0FU
+#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U))
+/* Alias word address of BDRST bit */
+#define RCC_BDRST_BIT_NUMBER 0x10U
+#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_BDRST_BIT_NUMBER * 4U))
+
+/* --- CSR Register ---*/
+/* Alias word address of LSION bit */
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74U)
+#define RCC_LSION_BIT_NUMBER 0x00U
+#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32U) + (RCC_LSION_BIT_NUMBER * 4U))
+
+/* CR register byte 3 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS ((uint32_t)0x40023802U)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x01U))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x02U))
+
+/* BDCR register base address */
+#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)2U)
+#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
+
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE ((uint32_t)2U) /* 2 ms */
+#define LSI_TIMEOUT_VALUE ((uint32_t)2U) /* 2 ms */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+
+/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15U)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK))
+
+#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV3) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV5) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV6) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV7) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV9) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV10) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV11) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV12) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV13) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV14) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV15) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV17) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV18) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV19) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV20) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV21) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV22) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV23) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV24) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV25) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV26) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV27) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV28) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV29) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV30) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV31))
+
+#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63U)
+
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2U) || ((VALUE) == 4U) || ((VALUE) == 6U) || ((VALUE) == 8U))
+
+#define IS_RCC_PLLQ_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 15U))
+
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
+ ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
+ ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \
+ ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
+ ((HCLK) == RCC_SYSCLK_DIV512))
+
+#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 15U))
+
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
+ ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
+ ((PCLK) == RCC_HCLK_DIV16))
+
+#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2))
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
+ ((DIV) == RCC_MCODIV_5))
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1FU)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2603 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Extension RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities RCC extension peripheral:
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCCEx RCCEx
+ * @brief RCCEx HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+ [..]
+ (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+ select the RTC clock source; in this case the Backup domain will be reset in
+ order to modify the RTC Clock source, as consequence RTC registers (including
+ the backup registers) and RCC_BDCR register are set to their reset values.
+
+@endverbatim
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE, PLL and PLLI2S OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO1 and MCO2 OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+void HAL_RCC_DeInit(void)
+{
+ /* Set HSION bit */
+ SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4);
+
+ /* Reset CFGR register */
+ CLEAR_REG(RCC->CFGR);
+
+ /* Reset HSEON, CSSON, PLLON, PLLI2S */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON| RCC_CR_PLLI2SON);
+
+ /* Reset PLLCFGR register */
+ CLEAR_REG(RCC->PLLCFGR);
+ SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2);
+
+ /* Reset PLLI2SCFGR register */
+ CLEAR_REG(RCC->PLLI2SCFGR);
+ SET_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1);
+
+ /* Reset HSEBYP bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+
+ /* Disable all interrupts */
+ CLEAR_REG(RCC->CIR);
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HSI_VALUE;
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE and PLL OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO1 and MCO2 OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+void HAL_RCC_DeInit(void)
+{
+ /* Set HSION bit */
+ SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4);
+
+ /* Reset CFGR register */
+ CLEAR_REG(RCC->CFGR);
+
+ /* Reset HSEON, CSSON, PLLON */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON);
+
+ /* Reset PLLCFGR register */
+ CLEAR_REG(RCC->PLLCFGR);
+ SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2);
+
+ /* Reset HSEBYP bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+
+ /* Disable all interrupts */
+ CLEAR_REG(RCC->CIR);
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HSI_VALUE;
+}
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F446xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, LTDC RTC and TIM).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+ uint32_t plli2sp = 0U;
+ uint32_t plli2sq = 0U;
+ uint32_t plli2sr = 0U;
+ uint32_t pllsaip = 0U;
+ uint32_t pllsaiq = 0U;
+ uint32_t plli2sused = 0U;
+ uint32_t pllsaiused = 0U;
+
+ /* Check the peripheral clock selection parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*------------------------ I2S APB1 configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- I2S APB2 configuration ----------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*--------------------------- SAI1 configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
+
+ /* Configure SAI1 Clock source */
+ __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*-------------------------- SAI2 configuration ----------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
+
+ /* Configure SAI2 Clock source */
+ __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------- RTC configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ /* Configure Timer Prescaler */
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- FMPI2C1 Configuration -----------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection));
+
+ /* Configure the FMPI2C1 clock source */
+ __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------ CEC Configuration -------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------- CLK48 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the CLK48 clock source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+ /* Enable the PLLSAI when it's used as clock source for CLK48 */
+ if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)
+ {
+ pllsaiused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------- SDIO Configuration -------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection));
+
+ /* Configure the SDIO clock source */
+ __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------ SPDIFRX Configuration ---------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifClockSelection));
+
+ /* Configure the SPDIFRX clock source */
+ __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for SPDIFRX */
+ if(PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- PLLI2S Configuration ------------------------*/
+ /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S on APB1,
+ I2S on APB2 or SPDIFRX */
+ if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* check for common PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /*------ In Case of PLLI2S is selected as source clock for I2S -----------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Read PLLI2SP/PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+ plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1U) << 1U);
+ plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)))
+ {
+ /* Check for PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ /* Check for PLLI2S/DIVQ parameters */
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SP/PLLI2SR value from PLLI2SCFGR register (this value is not needed for SAI configuration) */
+ plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1U) << 1U);
+ plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, PeriphClkInit->PLLI2S.PLLI2SQ, plli2sr);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /*------ In Case of PLLI2S is selected as source clock for SPDIFRX -------*/
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) && (PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+ /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+ plli2sq = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1U) << 1U);
+ plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */
+ /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, plli2sq, plli2sr);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected -----------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------- PLLSAI Configuration -----------------------*/
+ /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, CLK48 or SDIO */
+ if(pllsaiused == 1U)
+ {
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIM_VALUE(PeriphClkInit->PLLSAI.PLLSAIM));
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /*------ In Case of PLLSAI is selected as source clock for SAI -----------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
+ {
+ /* check for PLLSAIQ Parameter */
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ /* check for PLLSAI/DIVQ Parameter */
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1U) << 1U);
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, 0U);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*------ In Case of PLLSAI is selected as source clock for CLK48 ---------*/
+ /* In Case of PLLI2S is selected as source clock for CLK48 */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+ /* Read PLLSAIQ value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+ pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Configure the PLLSAI division factors */
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLI2SN/PLLSAIM) */
+ /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, 0U);
+ }
+
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\
+ RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMPI2C1 |\
+ RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO |\
+ RCC_PERIPHCLK_SPDIFRX;
+
+ /* Get the PLLI2S Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SM));
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1U) << 1U);
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Get the PLLSAI Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIM = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIM));
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+ PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1U) << 1U);
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+
+ /* Get the SAI1 clock configuration ----------------------------------------*/
+ PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
+
+ /* Get the SAI2 clock configuration ----------------------------------------*/
+ PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
+
+ /* Get the I2S APB1 clock configuration ------------------------------------*/
+ PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE();
+
+ /* Get the I2S APB2 clock configuration ------------------------------------*/
+ PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE();
+
+ /* Get the RTC Clock configuration -----------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the CEC clock configuration -----------------------------------------*/
+ PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+
+ /* Get the FMPI2C1 clock configuration -------------------------------------*/
+ PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE();
+
+ /* Get the CLK48 clock configuration ----------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDIO clock configuration ----------------------------------------*/
+ PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE();
+
+ /* Get the SPDIFRX clock configuration -------------------------------------*/
+ PeriphClkInit->SpdifClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE();
+
+ /* Get the TIM Prescaler configuration -------------------------------------*/
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+
+/**
+ * @brief Return the peripheral clock frequency for a given peripheral(SAI..)
+ * @note Return 0 if peripheral clock identifier not managed by this API
+ * @param PeriphClk: Peripheral clock identifier
+ * This parameter can be one of the following values:
+ * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock
+ * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock
+ * @retval Frequency in KHz
+ */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+ uint32_t tmpreg1 = 0U;
+ /* This variable used to store the SAI clock frequency (value in Hz) */
+ uint32_t frequency = 0U;
+ /* This variable used to store the VCO Input (value in Hz) */
+ uint32_t vcoinput = 0U;
+ /* This variable used to store the SAI clock source */
+ uint32_t saiclocksource = 0U;
+ if ((PeriphClk == RCC_PERIPHCLK_SAI1) || (PeriphClk == RCC_PERIPHCLK_SAI2))
+ {
+ saiclocksource = RCC->DCKCFGR;
+ saiclocksource &= (RCC_DCKCFGR_SAI1SRC | RCC_DCKCFGR_SAI2SRC);
+ switch (saiclocksource)
+ {
+ case 0U: /* PLLSAI is the clock source for SAI*/
+ {
+ /* Configure the PLLSAI division factor */
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLSAIM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM)));
+ }
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ tmpreg1 = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U;
+ frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U))/(tmpreg1);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ tmpreg1 = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U);
+ frequency = frequency/(tmpreg1);
+ break;
+ }
+ case RCC_DCKCFGR_SAI1SRC_0: /* PLLI2S is the clock source for SAI*/
+ case RCC_DCKCFGR_SAI2SRC_0: /* PLLI2S is the clock source for SAI*/
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ tmpreg1 = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U;
+ frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg1);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ tmpreg1 = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U);
+ frequency = frequency/(tmpreg1);
+ break;
+ }
+ case RCC_DCKCFGR_SAI1SRC_1: /* PLLR is the clock source for SAI*/
+ case RCC_DCKCFGR_SAI2SRC_1: /* PLLR is the clock source for SAI*/
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLL_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+
+ /* PLL_VCO Output = PLL_VCO Input * PLLN */
+ /* SAI_CLK_x = PLL_VCO Output/PLLR */
+ tmpreg1 = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U;
+ frequency = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U))/(tmpreg1);
+ break;
+ }
+ case RCC_DCKCFGR_SAI1SRC: /* External clock is the clock source for SAI*/
+ {
+ frequency = EXTERNAL_CLOCK_VALUE;
+ break;
+ }
+ case RCC_DCKCFGR_SAI2SRC: /* PLLSRC(HSE or HSI) is the clock source for SAI*/
+ {
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ frequency = (uint32_t)(HSI_VALUE);
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ frequency = (uint32_t)(HSE_VALUE);
+ }
+ break;
+ }
+ default :
+ {
+ break;
+ }
+ }
+ }
+ return frequency;
+}
+
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, LTDC, RTC and TIM).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+ uint32_t pllsaip = 0U;
+ uint32_t pllsaiq = 0U;
+ uint32_t pllsair = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*--------------------------- CLK48 Configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the CLK48 clock source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------ SDIO Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection));
+
+ /* Configure the SDIO clock source */
+ __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/
+ /*------------------- Common configuration SAI/I2S -------------------------*/
+ /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division
+ factor is common parameters for both peripherals */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*---------------------- I2S configuration -------------------------------*/
+ /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added
+ only for I2S configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*---------------------------- SAI configuration -------------------------*/
+ /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must
+ be added only for SAI configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S))
+ {
+ /* Check the PLLI2S division factors */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1);
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected -----------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Configure the PLLI2S multiplication and division factors */
+ __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/
+ /*----------------------- Common configuration SAI/LTDC --------------------*/
+ /* In Case of SAI, LTDC or CLK48 Clock Configuration through PLLSAI, PLLSAIN division
+ factor is common parameters for these peripherals */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) &&
+ (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)))
+ {
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*---------------------------- SAI configuration -------------------------*/
+ /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must
+ be added only for SAI configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI))
+ {
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1U) << 1U);
+ /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, pllsair);
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*---------------------------- LTDC configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
+ {
+ assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
+ assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1U) << 1U);
+ /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, pllsaiq, PeriphClkInit->PLLSAI.PLLSAIR);
+ /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
+ }
+
+ /*---------------------------- CLK48 configuration ------------------------*/
+ /* Configure the PLLSAI when it is used as clock source for CLK48 */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == (RCC_PERIPHCLK_CLK48)) &&
+ (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP))
+ {
+ assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+
+ /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* CLK48_CLK(first level) = PLLSAI_VCO Output/PLLSAIP */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, pllsair);
+ }
+
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- RTC configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI |\
+ RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO;
+
+ /* Get the PLLI2S Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ /* Get the PLLSAI Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+ PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+ PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR);
+ /* Get the RTC Clock configuration -----------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the CLK48 clock configuration -------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDIO clock configuration ----------------------------------------*/
+ PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE();
+
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, LTDC RTC and TIM).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+ uint32_t plli2sq = 0U;
+ uint32_t plli2sused = 0U;
+
+ /* Check the peripheral clock selection parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*----------------------------------- I2S APB1 configuration ---------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------------- I2S APB2 configuration ---------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------ RTC configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------ TIM configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ /* Configure Timer Prescaler */
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------- FMPI2C1 Configuration --------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection));
+
+ /* Configure the FMPI2C1 clock source */
+ __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------- CLK48 Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the SDIO clock source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for CLK48 */
+ if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------- SDIO Configuration -----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection));
+
+ /* Configure the SDIO clock source */
+ __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*-------------------------------------- PLLI2S Configuration --------------*/
+ /* PLLI2S is configured when a peripheral will use it as source clock : I2S on APB1 or
+ I2S on APB2*/
+ if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* check for common PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SCLKSOURCE(PeriphClkInit->PLLI2SSelection));
+ assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+ /*-------------------- Set the PLL I2S clock -----------------------------*/
+ __HAL_RCC_PLL_I2S_CONFIG(PeriphClkInit->PLLI2SSelection);
+
+ /*------- In Case of PLLI2S is selected as source clock for I2S ----------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) && (PeriphClkInit->SdioClockSelection == RCC_SDIOCLKSOURCE_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Read PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+ plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sq, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected ------------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/
+ /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*-------------------- DFSDM1 clock source configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection));
+
+ /* Configure the DFSDM1 interface clock source */
+ __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*-------------------- DFSDM1 Audio clock source configuration -------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection));
+
+ /* Configure the DFSDM1 Audio interface clock source */
+ __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\
+ RCC_PERIPHCLK_SDIO;
+
+ /* Get the PLLI2S Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SM));
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+
+ /* Get the I2S APB1 clock configuration ------------------------------------*/
+ PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE();
+
+ /* Get the I2S APB2 clock configuration ------------------------------------*/
+ PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE();
+
+ /* Get the RTC Clock configuration -----------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the FMPI2C1 clock configuration -------------------------------------*/
+ PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE();
+
+ /* Get the CLK48 clock configuration ----------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDIO clock configuration ----------------------------------------*/
+ PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE();
+
+ /* Get the TIM Prescaler configuration -------------------------------------*/
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the
+ * RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks).
+ *
+ * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case
+ * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup
+ * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*---------------------------- RTC configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- FMPI2C1 Configuration -----------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection));
+
+ /* Configure the FMPI2C1 clock source */
+ __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- LPTIM1 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection));
+
+ /* Configure the LPTIM1 clock source */
+ __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection);
+ }
+
+ /*---------------------------- I2S Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPBCLKSOURCE(PeriphClkInit->I2SClockSelection));
+
+ /* Configure the I2S clock source */
+ __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2SClockSelection);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC;
+
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+ /* Get the FMPI2C1 clock configuration -------------------------------------*/
+ PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE();
+
+ /* Get the I2S clock configuration -----------------------------------------*/
+ PeriphClkInit->I2SClockSelection = __HAL_RCC_GET_I2S_SOURCE();
+
+
+}
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, LTDC RTC and TIM).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/
+ /*----------------------- Common configuration SAI/I2S ----------------------*/
+ /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division
+ factor is common parameters for both peripherals */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*---------------------------- I2S configuration -------------------------------*/
+ /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added
+ only for I2S configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*---------------------------- SAI configuration -------------------------------*/
+ /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must
+ be added only for SAI configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S))
+ {
+ /* Check the PLLI2S division factors */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1);
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/
+ /*----------------------- Common configuration SAI/LTDC --------------------*/
+ /* In Case of SAI or LTDC Clock Configuration through PLLSAI, PLLSAIN division
+ factor is common parameters for both peripherals */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC))
+ {
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*---------------------------- SAI configuration -------------------------*/
+ /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must
+ be added only for SAI configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI))
+ {
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1);
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*---------------------------- LTDC configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
+ {
+ assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
+ assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
+
+ /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, PeriphClkInit->PLLSAI.PLLSAIR);
+ /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
+ }
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- RTC configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the PeriphClkInit according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI | RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC;
+
+ /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+ PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Get the PLLSAI/PLLI2S division factors -----------------------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+ PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR);
+ /* Get the RTC Clock configuration -----------------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the
+ * RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks).
+ *
+ * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case
+ * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup
+ * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*---------------------------- I2S configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+#if defined(STM32F411xE)
+ assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+#endif /* STM32F411xE */
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+#if defined(STM32F411xE)
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SR);
+#else
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+#endif /* STM32F411xE */
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /*---------------------------- RTC configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_RTC;
+
+ /* Get the PLLI2S Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+#if defined(STM32F411xE)
+ PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM);
+#endif /* STM32F411xE */
+ /* Get the RTC Clock configuration -----------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ /* Get the TIM Prescaler configuration -------------------------------------*/
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+ * supported by this API. User should request a transition to LSE Off
+ * first and then LSE On or LSE Bypass.
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this API. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @note This function add the PLL/PLLR factor management during PLL configuration this feature
+ * is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+ /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
+#if defined(STM32F446xx)
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+#else
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+#endif /* STM32F446xx */
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+ /* Check the HSE State */
+ if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is bypassed or disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+#if defined(STM32F446xx)
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+#else
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+#endif /* STM32F446xx */
+ {
+ /* When HSI is used as system clock it will not disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+ assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+ assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+ assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+ assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR));
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the main PLL clock source, multiplication and division factors. */
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PLLM,
+ RCC_OscInitStruct->PLL.PLLN,
+ RCC_OscInitStruct->PLL.PLLP,
+ RCC_OscInitStruct->PLL.PLLQ,
+ RCC_OscInitStruct->PLL.PLLR);
+
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that will be configured.
+ *
+ * @note This function is only available in case of STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ * @note This function add the PLL/PLLR factor management
+ * @retval None
+ */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+ /* Get the HSE configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+ }
+ else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+ }
+
+ /* Get the HSI configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+
+ /* Get the LSE configuration -----------------------------------------------*/
+ if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+ }
+ else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+ }
+
+ /* Get the LSI configuration -----------------------------------------------*/
+ if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+ }
+
+ /* Get the PLL configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+ }
+ RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+ RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+ RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
+ RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
+ RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
+ RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+}
+#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Select LSE mode
+ *
+ * @note This mode is only available for STM32F410xx/STM32F411xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ *
+ * @param Mode: specifies the LSE mode.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_LOWPOWER_MODE: LSE oscillator in low power mode selection
+ * @arg RCC_LSE_HIGHDRIVE_MODE: LSE oscillator in High Drive mode selection
+ * @retval None
+ */
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE_MODE(Mode));
+ if(Mode == RCC_LSE_HIGHDRIVE_MODE)
+ {
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
+ }
+ else
+ {
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
+ }
+}
+
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F446xx)
+/**
+ * @brief Returns the SYSCLK frequency
+ *
+ * @note This function implementation is valid only for STM32F446xx devices.
+ * @note This function add the PLL/PLLR System clock source
+ *
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+ * @note If SYSCLK source is PLL or PLLR, function returns values based on HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baudrate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ *
+ * @retval SYSCLK frequency
+ */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ uint32_t pllm = 0U;
+ uint32_t pllvco = 0U;
+ uint32_t pllp = 0U;
+ uint32_t pllr = 0U;
+ uint32_t sysclockfreq = 0U;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
+ {
+ sysclockfreq = HSE_VALUE;
+ break;
+ }
+ case RCC_CFGR_SWS_PLL: /* PLL/PLLP used as system clock source */
+ {
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLP */
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+ if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1U) *2U);
+
+ sysclockfreq = pllvco/pllp;
+ break;
+ }
+ case RCC_CFGR_SWS_PLLR: /* PLL/PLLR used as system clock source */
+ {
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLR */
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+ if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ pllr = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+
+ sysclockfreq = pllvco/pllr;
+ break;
+ }
+ default:
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ }
+ return sysclockfreq;
+}
+#endif /* STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,6616 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_EX_H
+#define __STM32F4xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
+
+ uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432
+ except for STM32F411xE devices where the Min_Data = 192 */
+
+ uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK).
+ This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
+
+ uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks.
+ This parameter must be a number between Min_Data = 4 and Max_Data = 15 */
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+ uint32_t PLLR; /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
+ This parameter is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx
+ and STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7 */
+#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+}RCC_PLLInitTypeDef;
+
+#if defined(STM32F446xx)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
+
+ uint32_t PLLI2SP; /*!< Specifies division factor for SPDIFRX Clock.
+ This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIM; /*!< Spcifies division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
+
+ uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS, SDIO and RNG clocks.
+ This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+}RCC_PLLSAIInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
+
+ uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
+
+ uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */
+
+ uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< Specifies CEC Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
+
+ uint32_t SpdifClockSelection; /*!< Specifies SPDIFRX Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */
+
+ uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
+ This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F446xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t I2SClockSelection; /*!< Specifies RTC Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2S_APB_Clock_Source */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */
+
+ uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S */
+
+ uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */
+
+ uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
+
+ uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
+
+ uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
+ This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
+
+ uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 Clock Selection.
+ This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */
+
+ uint32_t Dfsdm1AudioClockSelection;/*!< Specifies DFSDM1 Audio Clock Selection.
+ This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */
+
+ uint32_t PLLI2SSelection; /*!< Specifies PLL I2S Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_PLL_I2S_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS and SDIO clocks.
+ This parameter is only available in STM32F469xx/STM32F479xx devices.
+ This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */
+#endif /* STM32F469xx || STM32F479xx */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
+
+}RCC_PLLSAIInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
+ This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
+ This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
+
+ uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
+#endif /* STM32F469xx || STM32F479xx */
+}RCC_PeriphCLKInitTypeDef;
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+#if defined(STM32F411xE)
+ uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 62 */
+#endif /* STM32F411xE */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432
+ Except for STM32F411xE devices where the Min_Data = 192.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
+ * @{
+ */
+/* Peripheral Clock source for STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx */
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define RCC_PERIPHCLK_I2S_APB1 ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_I2S_APB2 ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000040U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000080U)
+#define RCC_PERIPHCLK_DFSDM1 ((uint32_t)0x00000100U)
+#define RCC_PERIPHCLK_DFSDM1_AUDIO ((uint32_t)0x00000200U)
+#endif /* STM32F412Zx || STM32F412Vx) || STM32F412Rx || STM32F412Cx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------- Peripheral Clock source for STM32F410xx ----------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_LPTIM1 ((uint32_t)0x00000010U)
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------- Peripheral Clock source for STM32F446xx ----------------*/
+#if defined(STM32F446xx)
+#define RCC_PERIPHCLK_I2S_APB1 ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_I2S_APB2 ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_SAI1 ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_SAI2 ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000040U)
+#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000080U)
+#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00000100U)
+#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000200U)
+#define RCC_PERIPHCLK_SPDIFRX ((uint32_t)0x00000400U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000800U)
+#endif /* STM32F446xx */
+/*-----------------------------------------------------------------------------*/
+
+/*----------- Peripheral Clock source for STM32F469xx/STM32F479xx -------------*/
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000040U)
+#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00000080U)
+#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000100U)
+#endif /* STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*-------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000040U)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/*----------------------------------------------------------------------------*/
+
+/*-------- Peripheral Clock source for STM32F40xxx/STM32F41xxx ---------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000004U)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000008U)
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+/*----------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup RCCEx_I2S_Clock_Source I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SCLKSOURCE_EXT ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+
+/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000U)
+#define RCC_PLLSAIDIVR_4 ((uint32_t)0x00010000U)
+#define RCC_PLLSAIDIVR_8 ((uint32_t)0x00020000U)
+#define RCC_PLLSAIDIVR_16 ((uint32_t)0x00030000U)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define RCC_PLLI2SP_DIV2 ((uint32_t)0x00000002U)
+#define RCC_PLLI2SP_DIV4 ((uint32_t)0x00000004U)
+#define RCC_PLLI2SP_DIV6 ((uint32_t)0x00000006U)
+#define RCC_PLLI2SP_DIV8 ((uint32_t)0x00000008U)
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define RCC_PLLSAIP_DIV2 ((uint32_t)0x00000002U)
+#define RCC_PLLSAIP_DIV4 ((uint32_t)0x00000004U)
+#define RCC_PLLSAIP_DIV6 ((uint32_t)0x00000006U)
+#define RCC_PLLSAIP_DIV8 ((uint32_t)0x00000008U)
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source
+ * @{
+ */
+#define RCC_SAIACLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAIACLKSOURCE_PLLI2S ((uint32_t)0x00100000U)
+#define RCC_SAIACLKSOURCE_EXT ((uint32_t)0x00200000U)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source
+ * @{
+ */
+#define RCC_SAIBCLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAIBCLKSOURCE_PLLI2S ((uint32_t)0x00400000U)
+#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)0x00800000U)
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source
+ * @{
+ */
+#define RCC_CLK48CLKSOURCE_PLLQ ((uint32_t)0x00000000U)
+#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR_CK48MSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
+ * @{
+ */
+#define RCC_SDIOCLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_SDIOSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source
+ * @{
+ */
+#define RCC_DSICLKSOURCE_DSIPHY ((uint32_t)0x00000000U)
+#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_DSISEL)
+/**
+ * @}
+ */
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F446xx)
+/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source
+ * @{
+ */
+#define RCC_SAI1CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAI1CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0)
+#define RCC_SAI1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1SRC_1)
+#define RCC_SAI1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI2_Clock_Source RCC SAI2 Clock Source
+ * @{
+ */
+#define RCC_SAI2CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAI2CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI2SRC_0)
+#define RCC_SAI2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI2SRC_1)
+#define RCC_SAI2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI2SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB1CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0)
+#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1)
+#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB2CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0)
+#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1)
+#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
+ * @{
+ */
+#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000U)
+#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
+#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI ((uint32_t)0x00000000U)
+#define RCC_CECCLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_CECSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source
+ * @{
+ */
+#define RCC_CLK48CLKSOURCE_PLLQ ((uint32_t)0x00000000U)
+#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR2_CK48MSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
+ * @{
+ */
+#define RCC_SDIOCLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SPDIFRX_Clock_Source RCC SPDIFRX Clock Source
+ * @{
+ */
+#define RCC_SPDIFRXCLKSOURCE_PLLR ((uint32_t)0x00000000U)
+#define RCC_SPDIFRXCLKSOURCE_PLLI2SP ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL)
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup RCCEx_PLL_I2S_Clock_Source PLL I2S Clock Source
+ * @{
+ */
+#define RCC_PLLI2SCLKSOURCE_PLLSRC ((uint32_t)0x00000000U)
+#define RCC_PLLI2SCLKSOURCE_EXT ((uint32_t)RCC_PLLI2SCFGR_PLLI2SSRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source RCC DFSDM1 Audio Clock Source
+ * @{
+ */
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 ((uint32_t)0x00000000U)
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 ((uint32_t)RCC_DCKCFGR_CKDFSDM1ASEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCC DFSDM1 Kernel Clock Source
+ * @{
+ */
+#define RCC_DFSDM1CLKSOURCE_APB2 ((uint32_t)0x00000000U)
+#define RCC_DFSDM1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB1CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0)
+#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1)
+#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB2CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0)
+#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1)
+#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
+ * @{
+ */
+#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000U)
+#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
+#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source
+ * @{
+ */
+#define RCC_CLK48CLKSOURCE_PLLQ ((uint32_t)0x00000000U)
+#define RCC_CLK48CLKSOURCE_PLLI2SQ ((uint32_t)RCC_DCKCFGR2_CK48MSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
+ * @{
+ */
+#define RCC_SDIOCLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL)
+/**
+ * @}
+ */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @defgroup RCCEx_I2S_APB_Clock_Source RCC I2S APB Clock Source
+ * @{
+ */
+#define RCC_I2SAPBCLKSOURCE_PLLR ((uint32_t)0x00000000U)
+#define RCC_I2SAPBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2SSRC_0)
+#define RCC_I2SAPBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2SSRC_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
+ * @{
+ */
+#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000U)
+#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
+#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source
+ * @{
+ */
+#define RCC_LPTIM1CLKSOURCE_PCLK ((uint32_t)0x00000000U)
+#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0)
+#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1)
+#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1)
+/**
+ * @}
+ */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection
+ * @{
+ */
+#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00U)
+#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01U)
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
+ STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection
+ * @{
+ */
+#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00U)
+#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01U)
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||\
+ STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx)
+/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source
+ * @{
+ */
+#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000U)
+#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source
+ * @{
+ */
+#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000U)
+#define RCC_MCO2SOURCE_I2SCLK RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
+/**
+ * @}
+ */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+/*------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx --------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
+#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
+#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
+#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETH_CLK_ENABLE() do { \
+ __HAL_RCC_ETHMAC_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETH_CLK_DISABLE() do { \
+ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMAC_CLK_DISABLE(); \
+ } while(0)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+ #define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_HASH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
+
+#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
+#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
+#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
+
+#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET)
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
+#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
+#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET)
+#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET)
+#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_LTDC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_DSI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))!= RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))== RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
+
+#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET)
+#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET)
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET)
+#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET)
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
+#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
+#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
+#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
+#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST))
+#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
+#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
+
+#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN))
+#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------------- STM32F40xxx/STM32F41xxx-----------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETH_CLK_ENABLE() do { \
+ __HAL_RCC_ETHMAC_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_ETH_CLK_DISABLE() do { \
+ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMAC_CLK_DISABLE(); \
+ } while(0)
+#endif /* STM32F407xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN))== RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
+#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
+#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
+#endif /* STM32F407xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_HASH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
+
+#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
+#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET)
+#endif /* STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET)
+#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+ /**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F415xx || STM32F417xx */
+
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+
+#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
+#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
+#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------- STM32F401xE/STM32F401xC --------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() (RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() (RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+/**
+ * @}
+ */
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U)
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U)
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U)
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+/**
+ * @}
+ */
+#endif /* STM32F401xC || STM32F401xE*/
+/*----------------------------------------------------------------------------*/
+
+/*-------------------------------- STM32F410xx -------------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_RNGEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB1) peripheral clock.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN))
+#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN))
+#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET)
+#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET)
+#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @{
+ */
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET)
+
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_RNGRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_RNGRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET()
+#define __HAL_RCC_AHB2_RELEASE_RESET()
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET()
+#define __HAL_RCC_AHB3_RELEASE_RESET()
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_RNGLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_RNGLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN))
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN))
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @{
+ */
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN))
+/**
+ * @}
+ */
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/*----------------------------------------------------------------------------*/
+
+/*-------------------------------- STM32F411xx -------------------------------*/
+#if defined(STM32F411xE)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEX_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @{
+ */
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @{
+ */
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+/**
+ * @}
+ */
+#endif /* STM32F411xE */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F446xx -----------------------------*/
+#if defined(STM32F446xx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN))!= RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
+
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+
+#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SAI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
+#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
+#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN))
+/**
+ * @}
+ */
+
+#endif /* STM32F446xx */
+/*----------------------------------------------------------------------------*/
+
+/*----------STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx----------*/
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F412Zx) || defined(STM32F412Vx)
+#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+#endif /* STM32F412Zx || STM32F412Vx */
+#if defined(STM32F412Rx)
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+#endif /* STM32F412Rx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F412Zx) || defined(STM32F412Vx)
+#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+
+#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+#endif /* STM32F412Zx || STM32F412Vx */
+#if defined(STM32F412Rx)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+#endif /* STM32F412Rx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET)
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN))!= RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET)
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+/**
+ * @}
+ */
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN))
+#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET)
+#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET)
+#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#if defined(STM32F412Zx) || defined(STM32F412Vx)
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+
+#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+#endif /* STM32F412Zx || STM32F412Vx */
+#if defined(STM32F412Cx)
+#define __HAL_RCC_AHB3_FORCE_RESET()
+#define __HAL_RCC_AHB3_RELEASE_RESET()
+
+#define __HAL_RCC_FSMC_FORCE_RESET()
+#define __HAL_RCC_QSPI_FORCE_RESET()
+
+#define __HAL_RCC_FSMC_RELEASE_RESET()
+#define __HAL_RCC_QSPI_RELEASE_RESET()
+#endif /* STM32F412Cx */
+#if defined(STM32F412Rx)
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+
+#define __HAL_RCC_FSMC_FORCE_RESET()
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_FSMC_RELEASE_RESET()
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+#endif /* STM32F412Rx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#if defined(STM32F412Zx) || defined(STM32F412Vx)
+#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+
+#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+#endif /* STM32F412Zx || STM32F412Vx */
+
+#if defined(STM32F412Rx)
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+#endif /* STM32F412Rx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN))
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN))
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN))
+/**
+ * @}
+ */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------------- PLL Configuration --------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 100 and 432 MHz.
+ *
+ * @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ *
+ * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ *
+ * @param __PLLR__: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note This parameter is only available in STM32F446xx/STM32F469xx/STM32F479xx/
+ STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \
+ (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \
+ ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
+ ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ)) | \
+ ((__PLLR__) << POSITION_VAL(RCC_PLLCFGR_PLLR))))
+#else
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432
+ * Except for STM32F411xE devices where Min_Data = 192.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 100 and 432 MHz, Except for STM32F411xE devices
+ * where frequency is between 192 and 432 MHz.
+ * @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ *
+ * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \
+ (RCC->PLLCFGR = (0x20000000U | (__RCC_PLLSource__) | (__PLLM__)| \
+ ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
+ ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))))
+ #endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------PLLI2S Configuration ---------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/** @brief Macros to enable or disable the PLLI2S.
+ * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE)
+#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE)
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#if defined(STM32F446xx)
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 1 MHz to limit PLLI2S jitter.
+ *
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLI2SP__: specifies division factor for SPDIFRX Clock.
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note the PLLI2SP parameter is only available with STM32F446xx Devices
+ *
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ *
+ * @param __PLLI2SQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
+ ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((((__PLLI2SP__) >> 1) -1) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) |\
+ ((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 1 MHz to limit PLLI2S jitter.
+ *
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ *
+ * @param __PLLI2SQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
+ ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#else
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ *
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = (((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#endif /* STM32F446xx */
+
+#if defined(STM32F411xE)
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note The PLLI2SM parameter is only used with STM32F411xE/STM32F410xx Devices
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLLI2S jitter.
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
+ ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#endif /* STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API)
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLI2SQ__: specifies the division factor for SAI1 clock.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx/469xx/479xx
+ * Devices and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) |\
+ ((__PLLI2SQ__) << 24) |\
+ ((__PLLI2SR__) << 28))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------------ PLLSAI Configuration ------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macros to Enable or Disable the PLLISAI.
+ * @note The PLLSAI is only available with STM32F429x/439x Devices.
+ * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE)
+#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE)
+
+#if defined(STM32F446xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ *
+ * @param __PLLSAIM__: specifies the division factor for PLLSAI VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLSAIM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 1 MHz to limit PLLI2S jitter.
+ * @note The PLLSAIM parameter is only used with STM32F446xx Devices
+ *
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLSAIP__: specifies division factor for OTG FS, SDIO and RNG clocks.
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note the PLLSAIP parameter is only available with STM32F446xx Devices
+ *
+ * @param __PLLSAIQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ *
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = ((__PLLSAIM__) | \
+ ((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \
+ ((((__PLLSAIP__) >> 1) -1) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) | \
+ ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ))))
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ *
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLSAIP__: specifies division factor for SDIO and CLK48 clocks.
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ *
+ * @param __PLLSAIQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ *
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = (((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) |\
+ ((((__PLLSAIP__) >> 1) -1) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) |\
+ ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)) |\
+ ((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR))))
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ *
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLSAIQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ *
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = (((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \
+ ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)) | \
+ ((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR))))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------- PLLSAI/PLLI2S Dividers Configuration -------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
+ * @note This function must be called before enabling the PLLI2S.
+ * @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock.
+ * This parameter must be a number between 1 and 32.
+ * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
+ */
+#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 32.
+ * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
+ *
+ * @note The LTDC peripheral is only available with STM32F427/437/429/439/469/479xx Devices.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 16.
+ * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__)))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------- Peripheral Clock selection -----------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\
+ defined(STM32F479xx)
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __SOURCE__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source.
+ */
+#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__))
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @brief Macro to configure SAI1BlockA clock source selection.
+ * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block A clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block A clock.
+ */
+#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__)))
+
+/** @brief Macro to configure SAI1BlockB clock source selection.
+ * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block B clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block B clock.
+ */
+#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__)))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F446xx)
+/** @brief Macro to configure SAI1 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ */
+#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__)))
+
+/** @brief Macro to Get SAI1 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ */
+#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC))
+
+/** @brief Macro to configure SAI2 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
+ */
+#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__)))
+
+/** @brief Macro to Get SAI2 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
+ */
+#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC))
+
+/** @brief Macro to configure I2S APB1 clock source selection.
+ * @note This function must be called before enabling PLL, PLLI2S and the I2S clock.
+ * @param __SOURCE__: specifies the I2S APB1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB1 clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC))
+
+/** @brief Macro to configure I2S APB2 clock source selection.
+ * @note This function must be called before enabling PLL, PLLI2S and the I2S clock.
+ * @param __SOURCE__: specifies the SAI Block A clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB2 clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC))
+
+/** @brief Macro to configure the CEC clock.
+ * @param __SOURCE__: specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CEC clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL))
+
+/** @brief Macro to configure the FMPI2C1 clock.
+ * @param __SOURCE__: specifies the FMPI2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the FMPI2C1 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
+
+/** @brief Macro to configure the CLK48 clock.
+ * @param __SOURCE__: specifies the CLK48 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
+ */
+#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CLK48 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
+ */
+#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL))
+
+/** @brief Macro to configure the SDIO clock.
+ * @param __SOURCE__: specifies the SDIO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SDIO clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL))
+
+/** @brief Macro to configure the SPDIFRX clock.
+ * @param __SOURCE__: specifies the SPDIFRX clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
+ */
+#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SPDIFRX clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
+ */
+#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL))
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @brief Macro to configure the CLK48 clock.
+ * @param __SOURCE__: specifies the CLK48 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
+ */
+#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CLK48 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
+ */
+#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL))
+
+/** @brief Macro to configure the SDIO clock.
+ * @param __SOURCE__: specifies the SDIO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SDIO clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL))
+
+/** @brief Macro to configure the DSI clock.
+ * @param __SOURCE__: specifies the DSI clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
+ * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
+ */
+#define __HAL_RCC_DSI_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the DSI clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
+ * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
+ */
+#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL))
+
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+ /** @brief Macro to configure the DFSDM1 clock.
+ * @param __DFSDM1_CLKSOURCE__: specifies the DFSDM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DFSDM1CLKSOURCE_APB2: APB2 clock used as kernel clock.
+ * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock.
+ * @retval None
+ */
+#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM1_CLKSOURCE__))
+
+/** @brief Macro to get the DFSDM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DFSDM1CLKSOURCE_APB2: APB2 clock used as kernel clock.
+ * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock.
+ */
+#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL)))
+
+/** @brief Macro to configure DFSDM1 Audio clock source selection.
+ * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx Devices.
+ * @param __SOURCE__: specifies the DFSDM1 Audio clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1: CK_I2S_APB1 selected as audio clock
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2: CK_I2S_APB2 selected as audio clock
+ */
+#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL, (__SOURCE__)))
+
+/** @brief Macro to Get DFSDM1 Audio clock source selection.
+ * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1: CK_I2S_APB1 selected as audio clock
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2: CK_I2S_APB2 selected as audio clock
+ */
+#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL))
+
+/** @brief Macro to configure I2S APB1 clock source selection.
+ * @param __SOURCE__: specifies the I2S APB1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB1 clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC))
+
+/** @brief Macro to configure I2S APB2 clock source selection.
+ * @param __SOURCE__: specifies the I2S APB2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB2 clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC))
+
+/** @brief Macro to configure the PLL I2S clock source (PLLI2SCLK).
+ * @note This macro must be called before enabling the I2S APB clock.
+ * @param __SOURCE__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLI2SCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ * @arg RCC_PLLI2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source.
+ */
+#define __HAL_RCC_PLL_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_PLLI2SCFGR_PLLI2SSRC_BB = (__SOURCE__))
+
+/** @brief Macro to configure the FMPI2C1 clock.
+ * @param __SOURCE__: specifies the FMPI2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the FMPI2C1 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
+
+/** @brief Macro to configure the CLK48 clock.
+ * @param __SOURCE__: specifies the CLK48 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock.
+ */
+#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CLK48 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock
+ */
+#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL))
+
+/** @brief Macro to configure the SDIO clock.
+ * @param __SOURCE__: specifies the SDIO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SDIO clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL))
+
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @brief Macro to configure I2S clock source selection.
+ * @param __SOURCE__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR.
+ * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC.
+ */
+#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR.
+ * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC.
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC))
+
+/** @brief Macro to configure the FMPI2C1 clock.
+ * @param __SOURCE__: specifies the FMPI2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the FMPI2C1 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
+
+/** @brief Macro to configure the LPTIM1 clock.
+ * @param __SOURCE__: specifies the LPTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_LPTIM1CLKSOURCE_PCLK: APB selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+ */
+#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the LPTIM1 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_LPTIM1CLKSOURCE_PCLK: APB selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+ */
+#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/** @brief Macro to configure the Timers clocks prescalers
+ * @note This feature is only available with STM32F429x/439x Devices.
+ * @param __PRESC__ : specifies the Timers clocks prescalers selection
+ * This parameter can be one of the following values:
+ * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1 or 2,
+ * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
+ * division by 4 or more.
+ * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
+ * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
+ * to division by 8 or more.
+ */
+#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||\
+ STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/*----------------------------------------------------------------------------*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Enable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Disable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Clear the PLLSAI RDY interrupt pending bits.
+ */
+#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
+
+/** @brief Check the PLLSAI RDY interrupt has occurred or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Check PLLSAI RDY flag is set or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @brief Macros to enable or disable the RCC MCO1 feature.
+ */
+#define __HAL_RCC_MCO1_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = ENABLE)
+#define __HAL_RCC_MCO1_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the RCC MCO2 feature.
+ */
+#define __HAL_RCC_MCO2_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = ENABLE)
+#define __HAL_RCC_MCO2_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = DISABLE)
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+
+#if defined(STM32F446xx)
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+#endif /* STM32F446xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode);
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Constants RCCEx Private Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+/* --- CR Register ---*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* Alias word address of PLLSAION bit */
+#define RCC_PLLSAION_BIT_NUMBER 0x1C
+#define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLSAION_BIT_NUMBER * 4))
+
+#define PLLSAI_TIMEOUT_VALUE ((uint32_t)2) /* Timeout value fixed to 2 ms */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Alias word address of PLLI2SON bit */
+#define RCC_PLLI2SON_BIT_NUMBER 0x1A
+#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLI2SON_BIT_NUMBER * 4))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+
+/* --- DCKCFGR Register ---*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
+ defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/* Alias word address of TIMPRE bit */
+#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8C)
+#define RCC_TIMPRE_BIT_NUMBER 0x18
+#define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (RCC_TIMPRE_BIT_NUMBER * 4))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F410xx || STM32F401xC ||\
+ STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/* --- CFGR Register ---*/
+#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08U)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx)
+/* Alias word address of I2SSRC bit */
+#define RCC_I2SSRC_BIT_NUMBER 0x17
+#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_I2SSRC_BIT_NUMBER * 4))
+
+#define PLLI2S_TIMEOUT_VALUE ((uint32_t)2) /* Timeout value fixed to 2 ms */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/* --- PLLI2SCFGR Register ---*/
+#define RCC_PLLI2SCFGR_OFFSET (RCC_OFFSET + 0x84U)
+/* Alias word address of PLLI2SSRC bit */
+#define RCC_PLLI2SSRC_BIT_NUMBER 0x16
+#define RCC_PLLI2SCFGR_PLLI2SSRC_BB (PERIPH_BB_BASE + (RCC_PLLI2SCFGR_OFFSET * 32) + (RCC_PLLI2SSRC_BIT_NUMBER * 4))
+
+#define PLLI2S_TIMEOUT_VALUE ((uint32_t)2) /* Timeout value fixed to 2 ms */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/* Alias word address of MCO1EN bit */
+#define RCC_MCO1EN_BIT_NUMBER 0x8
+#define RCC_CFGR_MCO1EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_MCO1EN_BIT_NUMBER * 4))
+
+/* Alias word address of MCO2EN bit */
+#define RCC_MCO2EN_BIT_NUMBER 0x9
+#define RCC_CFGR_MCO2EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_MCO2EN_BIT_NUMBER * 4))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#define PLL_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+#if defined(STM32F411xE)
+#define IS_RCC_PLLN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U))
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U))
+#else /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||
+ STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410Tx || STM32F410Cx ||
+ STM32F410Rx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Cx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Zx */
+#define IS_RCC_PLLN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
+#endif /* STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000007FU))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000007U))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000000FU))
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000001FU))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F446xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000FFFU))
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x000001FFU))
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x000003FFU))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U))
+
+#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
+
+#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U))
+
+#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U))
+
+#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U))
+
+#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_4) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_8) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_16))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63U)
+
+#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+ ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+#endif /* STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+ ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+
+#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
+
+#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK) ||\
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE))
+
+#define IS_RCC_I2SAPBCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPBCLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLSRC))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F446xx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV4) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV6) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV8))
+
+#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63U)
+
+#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV4) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV6) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV8))
+
+#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_SAI1CLKSOURCE_EXT))
+
+#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC))
+
+ #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) ||\
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+
+#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\
+ ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP))
+
+#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\
+ ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
+
+#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE) (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV4) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV6) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV8))
+
+#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\
+ ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP))
+
+#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\
+ ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
+
+#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_DSICLKSOURCE_DSIPHY))
+
+#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+ ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_PLLI2SCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLI2SCLKSOURCE_PLLSRC) || \
+ ((__SOURCE__) == RCC_PLLI2SCLKSOURCE_EXT))
+
+#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC))
+
+ #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
+
+#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\
+ ((SOURCE) == RCC_CLK48CLKSOURCE_PLLI2SQ))
+
+#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\
+ ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
+
+#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_APB2) || \
+ ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK))
+
+#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1) || \
+ ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2))
+
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx)
+
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
+ ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || \
+ STM32F412Rx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_I2SCLK)|| \
+ ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,529 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rng.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief RNG HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Random Number Generator (RNG) peripheral:
+ * + Initialization/de-initialization functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The RNG HAL driver can be used as follows:
+
+ (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro
+ in HAL_RNG_MspInit().
+ (#) Activate the RNG peripheral using HAL_RNG_Init() function.
+ (#) Wait until the 32 bit Random Number Generator contains a valid
+ random data using (polling/interrupt) mode.
+ (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RNG
+ * @{
+ */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+
+
+/* Private types -------------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup RNG_Private_Constants
+ * @{
+ */
+#define RNG_TIMEOUT_VALUE 2U
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions prototypes ----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup RNG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RNG_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the RNG according to the specified parameters
+ in the RNG_InitTypeDef and create the associated handle
+ (+) DeInitialize the RNG peripheral
+ (+) Initialize the RNG MSP
+ (+) DeInitialize RNG MSP
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RNG peripheral and creates the associated handle.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng)
+{
+ /* Check the RNG handle allocation */
+ if(hrng == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ __HAL_LOCK(hrng);
+
+ if(hrng->State == HAL_RNG_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hrng->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_RNG_MspInit(hrng);
+ }
+
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_BUSY;
+
+ /* Enable the RNG Peripheral */
+ __HAL_RNG_ENABLE(hrng);
+
+ /* Initialize the RNG state */
+ hrng->State = HAL_RNG_STATE_READY;
+
+ __HAL_UNLOCK(hrng);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the RNG peripheral.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng)
+{
+ /* Check the RNG handle allocation */
+ if(hrng == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Disable the RNG Peripheral */
+ CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN);
+
+ /* Clear RNG interrupt status flags */
+ CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS);
+
+ /* DeInit the low level hardware */
+ HAL_RNG_MspDeInit(hrng);
+
+ /* Update the RNG state */
+ hrng->State = HAL_RNG_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hrng);
+
+ /* Return the function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the RNG MSP.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval None
+ */
+__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrng);
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_RNG_MspInit must be implemented in the user file.
+ */
+}
+
+/**
+ * @brief DeInitializes the RNG MSP.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval None
+ */
+__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrng);
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_RNG_MspDeInit must be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup RNG_Exported_Functions_Group2
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Get the 32 bit Random number
+ (+) Get the 32 bit Random number with interrupt enabled
+ (+) Handle RNG interrupt request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Generates a 32-bit random number.
+ * @note Each time the random number data is read the RNG_FLAG_DRDY flag
+ * is automatically cleared.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @param random32bit: pointer to generated random number variable if successful.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit)
+{
+ uint32_t tickstart = 0U;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(hrng);
+
+ /* Check RNG peripheral state */
+ if(hrng->State == HAL_RNG_STATE_READY)
+ {
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check if data register contains valid random data */
+ while(__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
+ {
+ hrng->State = HAL_RNG_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get a 32bit Random number */
+ hrng->RandomNumber = hrng->Instance->DR;
+ *random32bit = hrng->RandomNumber;
+
+ hrng->State = HAL_RNG_STATE_READY;
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+
+ return status;
+}
+
+/**
+ * @brief Generates a 32-bit random number in interrupt mode.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(hrng);
+
+ /* Check RNG peripheral state */
+ if(hrng->State == HAL_RNG_STATE_READY)
+ {
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_BUSY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+
+ /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */
+ __HAL_RNG_ENABLE_IT(hrng);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+
+ status = HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Handles RNG interrupt request.
+ * @note In the case of a clock error, the RNG is no more able to generate
+ * random numbers because the PLL48CLK clock is not correct. User has
+ * to check that the clock controller is correctly configured to provide
+ * the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT().
+ * The clock error has no impact on the previously generated
+ * random numbers, and the RNG_DR register contents can be used.
+ * @note In the case of a seed error, the generation of random numbers is
+ * interrupted as long as the SECS bit is '1'. If a number is
+ * available in the RNG_DR register, it must not be used because it may
+ * not have enough entropy. In this case, it is recommended to clear the
+ * SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable
+ * the RNG peripheral to reinitialize and restart the RNG.
+ * @note User-written HAL_RNG_ErrorCallback() API is called once whether SEIS
+ * or CEIS are set.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval None
+
+ */
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng)
+{
+ /* RNG clock error interrupt occurred */
+ if((__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) || (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET))
+ {
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_ERROR;
+
+ HAL_RNG_ErrorCallback(hrng);
+
+ /* Clear the clock error flag */
+ __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI|RNG_IT_SEI);
+
+ }
+
+ /* Check RNG data ready interrupt occurred */
+ if(__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET)
+ {
+ /* Generate random number once, so disable the IT */
+ __HAL_RNG_DISABLE_IT(hrng);
+
+ /* Get the 32bit Random number (DRDY flag automatically cleared) */
+ hrng->RandomNumber = hrng->Instance->DR;
+
+ if(hrng->State != HAL_RNG_STATE_ERROR)
+ {
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_READY;
+
+ /* Data Ready callback */
+ HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber);
+ }
+ }
+}
+
+/**
+ * @brief Returns generated random number in polling mode (Obsolete)
+ * Use HAL_RNG_GenerateRandomNumber() API instead.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval Random value
+ */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng)
+{
+ if(HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
+ {
+ return hrng->RandomNumber;
+ }
+ else
+ {
+ return 0U;
+ }
+}
+
+/**
+ * @brief Returns a 32-bit random number with interrupt enabled (Obsolete),
+ * Use HAL_RNG_GenerateRandomNumber_IT() API instead.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval 32-bit random number
+ */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+ uint32_t random32bit = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hrng);
+
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_BUSY;
+
+ /* Get a 32bit Random number */
+ random32bit = hrng->Instance->DR;
+
+ /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */
+ __HAL_RNG_ENABLE_IT(hrng);
+
+ /* Return the 32 bit random number */
+ return random32bit;
+}
+
+/**
+ * @brief Read latest generated random number.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval random value
+ */
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng)
+{
+ return(hrng->RandomNumber);
+}
+
+/**
+ * @brief Data Ready callback in non-blocking mode.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @param random32bit: generated random number.
+ * @retval None
+ */
+__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrng);
+ UNUSED(random32bit);
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_RNG_ReadyDataCallback must be implemented in the user file.
+ */
+}
+
+/**
+ * @brief RNG error callbacks.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval None
+ */
+__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrng);
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_RNG_ErrorCallback must be implemented in the user file.
+ */
+}
+/**
+ * @}
+ */
+
+
+/** @addtogroup RNG_Exported_Functions_Group3
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the RNG state.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval HAL state
+ */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng)
+{
+ return hrng->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F410xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,369 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rng.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RNG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RNG_H
+#define __STM32F4xx_HAL_RNG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RNG RNG
+ * @brief RNG HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Types RNG Exported Types
+ * @{
+ */
+
+/** @defgroup RNG_Exported_Types_Group1 RNG State Structure definition
+ * @{
+ */
+typedef enum
+{
+ HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */
+ HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */
+ HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */
+ HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */
+ HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */
+
+}HAL_RNG_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Types_Group2 RNG Handle Structure definition
+ * @{
+ */
+typedef struct
+{
+ RNG_TypeDef *Instance; /*!< Register base address */
+
+ HAL_LockTypeDef Lock; /*!< RNG locking object */
+
+ __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */
+
+ uint32_t RandomNumber; /*!< Last Generated RNG Data */
+
+}RNG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Constants RNG Exported Constants
+ * @{
+ */
+
+/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition
+ * @{
+ */
+#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */
+#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */
+#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition
+ * @{
+ */
+#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */
+#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */
+#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Macros RNG Exported Macros
+ * @{
+ */
+
+/** @brief Reset RNG handle state
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
+
+/**
+ * @brief Enables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN)
+
+/**
+ * @brief Disables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN)
+
+/**
+ * @brief Check the selected RNG flag status.
+ * @param __HANDLE__: RNG Handle
+ * @param __FLAG__: RNG flag
+ * This parameter can be one of the following values:
+ * @arg RNG_FLAG_DRDY: Data ready
+ * @arg RNG_FLAG_CECS: Clock error current status
+ * @arg RNG_FLAG_SECS: Seed error current status
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the selected RNG flag status.
+ * @param __HANDLE__: RNG handle
+ * @param __FLAG__: RNG flag to clear
+ * @note WARNING: This is a dummy macro for HAL code alignment,
+ * flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only.
+ * @retval None
+ */
+#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */
+
+
+
+/**
+ * @brief Enables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE)
+
+/**
+ * @brief Disables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE)
+
+/**
+ * @brief Checks whether the specified RNG interrupt has occurred or not.
+ * @param __HANDLE__: RNG Handle
+ * @param __INTERRUPT__: specifies the RNG interrupt status flag to check.
+ * This parameter can be one of the following values:
+ * @arg RNG_IT_DRDY: Data ready interrupt
+ * @arg RNG_IT_CEI: Clock error interrupt
+ * @arg RNG_IT_SEI: Seed error interrupt
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clear the RNG interrupt status flags.
+ * @param __HANDLE__: RNG Handle
+ * @param __INTERRUPT__: specifies the RNG interrupt status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg RNG_IT_CEI: Clock error interrupt
+ * @arg RNG_IT_SEI: Seed error interrupt
+ * @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY.
+ * @retval None
+ */
+#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RNG_Exported_Functions RNG Exported Functions
+ * @{
+ */
+
+/** @defgroup RNG_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
+HAL_StatusTypeDef HAL_RNG_DeInit (RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
+
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit);
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng);
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng);
+
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef* hrng, uint32_t random32bit);
+
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup RNG_Private_Types RNG Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup RNG_Private_Defines RNG Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Variables RNG Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Constants RNG Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RNG_Private_Macros RNG Private Macros
+ * @{
+ */
+#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \
+ ((IT) == RNG_IT_SEI))
+
+#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
+ ((FLAG) == RNG_FLAG_CECS) || \
+ ((FLAG) == RNG_FLAG_SECS))
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup RNG_Private_Functions_Prototypes RNG Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Functions RNG Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F410xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_RNG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1547 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief RTC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Real Time Clock (RTC) peripheral:
+ * + Initialization and de-initialization functions
+ * + RTC Time and Date functions
+ * + RTC Alarm functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Backup Domain Operating Condition #####
+ ==============================================================================
+ [..] The real-time clock (RTC), the RTC backup registers, and the backup
+ SRAM (BKP SRAM) can be powered from the VBAT voltage when the main
+ VDD supply is powered off.
+ To retain the content of the RTC backup registers, backup SRAM, and supply
+ the RTC when VDD is turned off, VBAT pin can be connected to an optional
+ standby voltage supplied by a battery or by another source.
+
+ [..] To allow the RTC operating even when the main digital supply (VDD) is turned
+ off, the VBAT pin powers the following blocks:
+ (#) The RTC
+ (#) The LSE oscillator
+ (#) The backup SRAM when the low power backup regulator is enabled
+ (#) PC13 to PC15 I/Os, plus PI8 I/O (when available)
+
+ [..] When the backup domain is supplied by VDD (analog switch connected to VDD),
+ the following pins are available:
+ (#) PC14 and PC15 can be used as either GPIO or LSE pins
+ (#) PC13 can be used as a GPIO or as the RTC_AF1 pin
+ (#) PI8 can be used as a GPIO or as the RTC_AF2 pin
+
+ [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT
+ because VDD is not present), the following pins are available:
+ (#) PC14 and PC15 can be used as LSE pins only
+ (#) PC13 can be used as the RTC_AF1 pin
+ (#) PI8 can be used as the RTC_AF2 pin
+
+ ##### Backup Domain Reset #####
+ ==================================================================
+ [..] The backup domain reset sets all RTC registers and the RCC_BDCR register
+ to their reset values. The BKPSRAM is not affected by this reset. The only
+ way to reset the BKPSRAM is through the Flash interface by requesting
+ a protection level change from 1 to 0.
+ [..] A backup domain reset is generated when one of the following events occurs:
+ (#) Software reset, triggered by setting the BDRST bit in the
+ RCC Backup domain control register (RCC_BDCR).
+ (#) VDD or VBAT power on, if both supplies have previously been powered off.
+
+ ##### Backup Domain Access #####
+ ==================================================================
+ [..] After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted write
+ accesses.
+ [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Enable the Power Controller (PWR) APB1 interface clock using the
+ __HAL_RCC_PWR_CLK_ENABLE() function.
+ (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+ (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function.
+ (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function.
+
+
+ ##### How to use this driver #####
+ ==================================================================
+ [..]
+ (+) Enable the RTC domain access (see description in the section above).
+ (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+ format using the HAL_RTC_Init() function.
+
+ *** Time and Date configuration ***
+ ===================================
+ [..]
+ (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime()
+ and HAL_RTC_SetDate() functions.
+ (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions.
+
+ *** Alarm configuration ***
+ ===========================
+ [..]
+ (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function.
+ You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function.
+ (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
+
+ ##### RTC and low power modes #####
+ ==================================================================
+ [..] The MCU can be woken up from a low power mode by an RTC alternate
+ function.
+ [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B),
+ RTC wake-up, RTC tamper event detection and RTC time stamp event detection.
+ These RTC alternate functions can wake up the system from the Stop and
+ Standby low power modes.
+ [..] The system can also wake up from low power modes without depending
+ on an external interrupt (Auto-wake-up mode), by using the RTC alarm
+ or the RTC wake-up events.
+ [..] The RTC provides a programmable time base for waking up from the
+ Stop or Standby mode at regular intervals.
+ Wake-up from STOP and STANDBY modes is possible only when the RTC clock source
+ is LSE or LSI.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RTC RTC
+ * @brief RTC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Functions RTC Exported Functions
+ * @{
+ */
+
+/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to initialize and configure the
+ RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable
+ RTC registers Write protection, enter and exit the RTC initialization mode,
+ RTC registers synchronization check and reference clock detection enable.
+ (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base.
+ It is split into 2 programmable prescalers to minimize power consumption.
+ (++) A 7-bit asynchronous prescaler and a 13-bit synchronous prescaler.
+ (++) When both prescalers are used, it is recommended to configure the
+ asynchronous prescaler to a high value to minimize power consumption.
+ (#) All RTC registers are Write protected. Writing to the RTC registers
+ is enabled by writing a key into the Write Protection register, RTC_WPR.
+ (#) To configure the RTC Calendar, user application should enter
+ initialization mode. In this mode, the calendar counter is stopped
+ and its value can be updated. When the initialization sequence is
+ complete, the calendar restarts counting after 4 RTCCLK cycles.
+ (#) To read the calendar through the shadow registers after Calendar
+ initialization, calendar update or after wake-up from low power modes
+ the software must first clear the RSF flag. The software must then
+ wait until it is set again before reading the calendar, which means
+ that the calendar registers have been correctly copied into the
+ RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function
+ implements the above software sequence (RSF clear and RSF check).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RTC peripheral
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
+{
+ /* Check the RTC peripheral state */
+ if(hrtc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat));
+ assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
+ assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv));
+ assert_param (IS_RTC_OUTPUT(hrtc->Init.OutPut));
+ assert_param (IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity));
+ assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType));
+
+ if(hrtc->State == HAL_RTC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hrtc->Lock = HAL_UNLOCKED;
+ /* Initialize RTC MSP */
+ HAL_RTC_MspInit(hrtc);
+ }
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Clear RTC_CR FMT, OSEL and POL Bits */
+ hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL));
+ /* Set RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity);
+
+ /* Configure the RTC PRER */
+ hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv);
+ hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << 16U);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+ hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_ALARMOUTTYPE;
+ hrtc->Instance->TAFCR |= (uint32_t)(hrtc->Init.OutPutType);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief DeInitializes the RTC peripheral
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note This function doesn't reset the RTC Backup Data registers.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Reset TR, DR and CR registers */
+ hrtc->Instance->TR = (uint32_t)0x00000000U;
+ hrtc->Instance->DR = (uint32_t)0x00002101U;
+ /* Reset All CR bits except CR[2:0] */
+ hrtc->Instance->CR &= (uint32_t)0x00000007U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till WUTWF flag is set and if Time out is reached exit */
+ while(((hrtc->Instance->ISR) & RTC_ISR_WUTWF) == (uint32_t)RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset all RTC CR register bits */
+ hrtc->Instance->CR &= (uint32_t)0x00000000U;
+ hrtc->Instance->WUTR = (uint32_t)0x0000FFFFU;
+ hrtc->Instance->PRER = (uint32_t)0x007F00FFU;
+ hrtc->Instance->CALIBR = (uint32_t)0x00000000U;
+ hrtc->Instance->ALRMAR = (uint32_t)0x00000000U;
+ hrtc->Instance->ALRMBR = (uint32_t)0x00000000U;
+ hrtc->Instance->SHIFTR = (uint32_t)0x00000000U;
+ hrtc->Instance->CALR = (uint32_t)0x00000000U;
+ hrtc->Instance->ALRMASSR = (uint32_t)0x00000000U;
+ hrtc->Instance->ALRMBSSR = (uint32_t)0x00000000U;
+
+ /* Reset ISR register and exit initialization mode */
+ hrtc->Instance->ISR = (uint32_t)0x00000000U;
+
+ /* Reset Tamper and alternate functions configuration register */
+ hrtc->Instance->TAFCR = 0x00000000U;
+
+ /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* De-Initialize RTC MSP */
+ HAL_RTC_MspDeInit(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the RTC MSP.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the RTC MSP.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
+ * @brief RTC Time and Date functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Time and Date functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Time and Date features
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets RTC current time.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTime: Pointer to Time structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving));
+ assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ assert_param(IS_RTC_HOUR12(sTime->Hours));
+ assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+ }
+ else
+ {
+ sTime->TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(sTime->Hours));
+ }
+ assert_param(IS_RTC_MINUTES(sTime->Minutes));
+ assert_param(IS_RTC_SECONDS(sTime->Seconds));
+
+ tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << 8U) | \
+ ((uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \
+ (((uint32_t)sTime->TimeFormat) << 16U));
+ }
+ else
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ tmpreg = RTC_Bcd2ToByte(sTime->Hours);
+ assert_param(IS_RTC_HOUR12(tmpreg));
+ assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+ }
+ else
+ {
+ sTime->TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
+ }
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
+ tmpreg = (((uint32_t)(sTime->Hours) << 16U) | \
+ ((uint32_t)(sTime->Minutes) << 8U) | \
+ ((uint32_t)sTime->Seconds) | \
+ ((uint32_t)(sTime->TimeFormat) << 16U));
+ }
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Set the RTC_TR register */
+ hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
+
+ /* Clear the bits to be configured */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_BCK;
+
+ /* Configure the RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+ /* If CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Gets RTC current time.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTime: Pointer to Time structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @note You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds
+ * value in second fraction ratio with time unit following generic formula:
+ * Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit
+ * This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS
+ * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
+ * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+ * Reading RTC current time locks the values in calendar shadow registers until current date is read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get subseconds structure field from the corresponding register */
+ sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR);
+
+ /* Get SecondFraction structure field from the corresponding register field*/
+ sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S);
+
+ /* Get the TR register */
+ tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK);
+
+ /* Fill the structure fields with the read parameters */
+ sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16U);
+ sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8U);
+ sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU));
+ sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16U);
+
+ /* Check the input parameters format */
+ if(Format == RTC_FORMAT_BIN)
+ {
+ /* Convert the time structure parameters to Binary format */
+ sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours);
+ sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes);
+ sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets RTC current date.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sDate: Pointer to date structure
+ * @param Format: specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+ uint32_t datetmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U))
+ {
+ sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU);
+ }
+
+ assert_param(IS_RTC_WEEKDAY(sDate->WeekDay));
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ assert_param(IS_RTC_YEAR(sDate->Year));
+ assert_param(IS_RTC_MONTH(sDate->Month));
+ assert_param(IS_RTC_DATE(sDate->Date));
+
+ datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sDate->Month) << 8U) | \
+ ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \
+ ((uint32_t)sDate->WeekDay << 13U));
+ }
+ else
+ {
+ assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
+ datetmpreg = RTC_Bcd2ToByte(sDate->Month);
+ assert_param(IS_RTC_MONTH(datetmpreg));
+ datetmpreg = RTC_Bcd2ToByte(sDate->Date);
+ assert_param(IS_RTC_DATE(datetmpreg));
+
+ datetmpreg = ((((uint32_t)sDate->Year) << 16U) | \
+ (((uint32_t)sDate->Month) << 8U) | \
+ ((uint32_t)sDate->Date) | \
+ (((uint32_t)sDate->WeekDay) << 13U));
+ }
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Set the RTC_DR register */
+ hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+ /* If CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY ;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Gets RTC current date.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sDate: Pointer to Date structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
+ * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+ * Reading RTC current time locks the values in calendar shadow registers until Current date is read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+ uint32_t datetmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get the DR register */
+ datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK);
+
+ /* Fill the structure fields with the read parameters */
+ sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16U);
+ sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8U);
+ sDate->Date = (uint8_t)(datetmpreg & (RTC_DR_DT | RTC_DR_DU));
+ sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> 13U);
+
+ /* Check the input parameters format */
+ if(Format == RTC_FORMAT_BIN)
+ {
+ /* Convert the date structure parameters to Binary format */
+ sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year);
+ sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month);
+ sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
+ * @brief RTC Alarm functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Alarm functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Alarm feature
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Sets the specified RTC Alarm.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Alarm structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg = 0U, subsecondtmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+ assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+ }
+ assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+ assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+ }
+ else
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+ }
+
+ tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24U) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+ else
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+ assert_param(IS_RTC_HOUR12(tmpreg));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+ }
+
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
+ }
+ else
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
+ }
+
+ tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16U) | \
+ ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8U) | \
+ ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
+ ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24U) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+
+ /* Configure the Alarm A or Alarm B Sub Second registers */
+ subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Alarm register */
+ if(sAlarm->Alarm == RTC_ALARM_A)
+ {
+ /* Disable the Alarm A interrupt */
+ __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+ /* Configure the Alarm A Sub Second register */
+ hrtc->Instance->ALRMASSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMA_ENABLE(hrtc);
+ }
+ else
+ {
+ /* Disable the Alarm B interrupt */
+ __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+ /* Configure the Alarm B Sub Second register */
+ hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMB_ENABLE(hrtc);
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets the specified RTC Alarm with Interrupt
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Alarm structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+ uint32_t tmpreg = 0U, subsecondtmpreg = 0U;
+ __IO uint32_t count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U) ;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+ assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+ }
+ assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+ assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+ }
+ else
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+ }
+ tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24U) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+ else
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+ assert_param(IS_RTC_HOUR12(tmpreg));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+ }
+
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
+ }
+ else
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
+ }
+ tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16U) | \
+ ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8U) | \
+ ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
+ ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24U) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+ /* Configure the Alarm A or Alarm B Sub Second registers */
+ subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Alarm register */
+ if(sAlarm->Alarm == RTC_ALARM_A)
+ {
+ /* Disable the Alarm A interrupt */
+ __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+ /* Clear flag alarm A */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+ /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET);
+
+ hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+ /* Configure the Alarm A Sub Second register */
+ hrtc->Instance->ALRMASSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMA_ENABLE(hrtc);
+ /* Configure the Alarm interrupt */
+ __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA);
+ }
+ else
+ {
+ /* Disable the Alarm B interrupt */
+ __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+ /* Clear flag alarm B */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+ /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET);
+
+ hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+ /* Configure the Alarm B Sub Second register */
+ hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMB_ENABLE(hrtc);
+ /* Configure the Alarm interrupt */
+ __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB);
+ }
+
+ /* RTC Alarm Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_ALARM_EXTI_ENABLE_IT();
+
+ EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate the specified RTC Alarm
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Alarm: Specifies the Alarm.
+ * This parameter can be one of the following values:
+ * @arg RTC_ALARM_A: AlarmA
+ * @arg RTC_ALARM_B: AlarmB
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_ALARM(Alarm));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ if(Alarm == RTC_ALARM_A)
+ {
+ /* AlarmA */
+ __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* AlarmB */
+ __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc,RTC_IT_ALRB);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the RTC Alarm value and masks.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Date structure
+ * @param Alarm: Specifies the Alarm.
+ * This parameter can be one of the following values:
+ * @arg RTC_ALARM_A: AlarmA
+ * @arg RTC_ALARM_B: AlarmB
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
+{
+ uint32_t tmpreg = 0U, subsecondtmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_ALARM(Alarm));
+
+ if(Alarm == RTC_ALARM_A)
+ {
+ /* AlarmA */
+ sAlarm->Alarm = RTC_ALARM_A;
+
+ tmpreg = (uint32_t)(hrtc->Instance->ALRMAR);
+ subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR ) & RTC_ALRMASSR_SS);
+ }
+ else
+ {
+ sAlarm->Alarm = RTC_ALARM_B;
+
+ tmpreg = (uint32_t)(hrtc->Instance->ALRMBR);
+ subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS);
+ }
+
+ /* Fill the structure with the read parameters */
+ sAlarm->AlarmTime.Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> 16U);
+ sAlarm->AlarmTime.Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> 8U);
+ sAlarm->AlarmTime.Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU));
+ sAlarm->AlarmTime.TimeFormat = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16U);
+ sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg;
+ sAlarm->AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24U);
+ sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL);
+ sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL);
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+ sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes);
+ sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds);
+ sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Alarm interrupt request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc)
+{
+ if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRA))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRA) != (uint32_t)RESET)
+ {
+ /* AlarmA callback */
+ HAL_RTC_AlarmAEventCallback(hrtc);
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRAF);
+ }
+ }
+
+ if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRB))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRB) != (uint32_t)RESET)
+ {
+ /* AlarmB callback */
+ HAL_RTCEx_AlarmBEventCallback(hrtc);
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRBF);
+ }
+ }
+
+ /* Clear the EXTI's line Flag for RTC Alarm */
+ __HAL_RTC_ALARM_EXTI_CLEAR_FLAG();
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief Alarm A callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_AlarmAEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles AlarmA Polling request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Wait for RTC Time and Date Synchronization
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are
+ * synchronized with RTC APB clock.
+ * @note The RTC Resynchronization mode is write protected, use the
+ * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+ * @note To read the calendar through the shadow registers after Calendar
+ * initialization, calendar update or after wake-up from low power modes
+ * the software must first clear the RSF flag.
+ * The software must then wait until it is set again before reading
+ * the calendar, which means that the calendar registers have been
+ * correctly copied into the RTC_TR and RTC_DR shadow registers.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Clear RSF flag */
+ hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait the registers to be synchronised */
+ while((hrtc->Instance->ISR & RTC_ISR_RSF) == (uint32_t)RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Get RTC state
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Returns the RTC state.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL state
+ */
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc)
+{
+ return hrtc->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Enters the RTC Initialization mode.
+ * @note The RTC Initialization mode is write protected, use the
+ * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check if the Initialization mode is set */
+ if((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+ {
+ /* Set the Initialization mode */
+ hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC is in INIT state and if Time out is reached exit */
+ while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Converts a 2 digit decimal to BCD format.
+ * @param Value: Byte to be converted
+ * @retval Converted byte
+ */
+uint8_t RTC_ByteToBcd2(uint8_t Value)
+{
+ uint32_t bcdhigh = 0U;
+
+ while(Value >= 10U)
+ {
+ bcdhigh++;
+ Value -= 10U;
+ }
+
+ return ((uint8_t)(bcdhigh << 4U) | Value);
+}
+
+/**
+ * @brief Converts from 2 digit BCD to Binary.
+ * @param Value: BCD value to be converted
+ * @retval Converted word
+ */
+uint8_t RTC_Bcd2ToByte(uint8_t Value)
+{
+ uint32_t tmp = 0U;
+ tmp = ((uint8_t)(Value & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U;
+ return (tmp + (Value & (uint8_t)0x0FU));
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,833 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_H
+#define __STM32F4xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Types RTC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */
+}HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFFU */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTC_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content.
+ This parameter corresponds to a time unit range between [0-1] Second
+ with [1 Sec / SecondFraction +1] granularity */
+
+ uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content
+ corresponding to Synchronous pre-scaler factor value (PREDIV_S)
+ This parameter corresponds to a time unit range between [0-1] Second
+ with [1 Sec / SecondFraction +1] granularity.
+ This field will be used only by HAL_RTC_GetTime function */
+
+ uint32_t DayLightSaving; /*!< Specifies DayLight Save Operation.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+ * @brief RTC Handle Structure definition
+ */
+typedef struct
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+ * @{
+ */
+
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000U)
+#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000U)
+#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000U)
+#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000U)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000U)
+#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000U)
+#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00U)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000U)
+#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000U)
+#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000U)
+#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions
+ * @{
+ */
+#define RTC_FORMAT_BIN ((uint32_t)0x00000000U)
+#define RTC_FORMAT_BCD ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
+ * @{
+ */
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01U)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02U)
+#define RTC_MONTH_MARCH ((uint8_t)0x03U)
+#define RTC_MONTH_APRIL ((uint8_t)0x04U)
+#define RTC_MONTH_MAY ((uint8_t)0x05U)
+#define RTC_MONTH_JUNE ((uint8_t)0x06U)
+#define RTC_MONTH_JULY ((uint8_t)0x07U)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08U)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09U)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10U)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11U)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01U)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000U)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000U)
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+#define RTC_ALARM_B RTC_CR_ALRBE
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000U) /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000U) /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000U) /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000U) /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000U) /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000U) /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000U) /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000U) /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000U) /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000U) /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000U) /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000U) /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000U) /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000U) /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000U) /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_NONE ((uint32_t)0x0F000000U) /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
+ * @{
+ */
+#define RTC_IT_TS ((uint32_t)0x00008000U)
+#define RTC_IT_WUT ((uint32_t)0x00004000U)
+#define RTC_IT_ALRB ((uint32_t)0x00002000U)
+#define RTC_IT_ALRA ((uint32_t)0x00001000U)
+#define RTC_IT_TAMP ((uint32_t)0x00000004U) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 ((uint32_t)0x00020000U)
+#define RTC_IT_TAMP2 ((uint32_t)0x00040000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF ((uint32_t)0x00010000U)
+#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000U)
+#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000U)
+#define RTC_FLAG_TSOVF ((uint32_t)0x00001000U)
+#define RTC_FLAG_TSF ((uint32_t)0x00000800U)
+#define RTC_FLAG_WUTF ((uint32_t)0x00000400U)
+#define RTC_FLAG_ALRBF ((uint32_t)0x00000200U)
+#define RTC_FLAG_ALRAF ((uint32_t)0x00000100U)
+#define RTC_FLAG_INITF ((uint32_t)0x00000040U)
+#define RTC_FLAG_RSF ((uint32_t)0x00000020U)
+#define RTC_FLAG_INITS ((uint32_t)0x00000010U)
+#define RTC_FLAG_SHPF ((uint32_t)0x00000008U)
+#define RTC_FLAG_WUTWF ((uint32_t)0x00000004U)
+#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002U)
+#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+ * @{
+ */
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCAU; \
+ (__HANDLE__)->Instance->WPR = 0x53U; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFFU; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+ * @brief Disable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @arg RTC_FLAG_ALRAWF
+ * @arg RTC_FLAG_ALRBWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Enable interrupt on the RTC Alarm associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Alarm associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable event on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable event on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); \
+ __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Clear the RTC Alarm associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT)
+/**
+ * @}
+ */
+
+/* Include RTC HAL Extension module */
+#include "stm32f4xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group2
+ * @{
+ */
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group3
+ * @{
+ */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group5
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Constants RTC Private Constants
+ * @{
+ */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7FU)
+#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3FU)
+#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFFU)
+#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5FU)
+#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
+ RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
+ RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
+ RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
+ RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
+
+#define RTC_TIMEOUT_VALUE 1000
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTC_Private_Macros RTC Private Macros
+ * @{
+ */
+
+/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
+ * @{
+ */
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMB) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0U) && ((HOUR) <= (uint32_t)12U))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23U)
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FU)
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFFU)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59U)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59U)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99U)
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1U) && ((MONTH) <= (uint32_t)12U))
+#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1U) && ((DATE) <= (uint32_t)31U))
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0U) && ((DATE) <= (uint32_t)31U))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+#define IS_RTC_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7FU) == (uint32_t)RESET)
+#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFFU)
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_NONE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Functions RTC Private Functions
+ * @{
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1781 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief RTC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Real Time Clock (RTC) Extension peripheral:
+ * + RTC Time Stamp functions
+ * + RTC Tamper functions
+ * + RTC Wake-up functions
+ * + Extension Control functions
+ * + Extension RTC features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) Enable the RTC domain access.
+ (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+ format using the HAL_RTC_Init() function.
+
+ *** RTC Wake-up configuration ***
+ ================================
+ [..]
+ (+) To configure the RTC Wake-up Clock source and Counter use the HAL_RTC_SetWakeUpTimer()
+ function. You can also configure the RTC Wake-up timer in interrupt mode
+ using the HAL_RTC_SetWakeUpTimer_IT() function.
+ (+) To read the RTC Wake-up Counter register, use the HAL_RTC_GetWakeUpTimer()
+ function.
+
+ *** TimeStamp configuration ***
+ ===============================
+ [..]
+ (+) Configure the RTC_AFx trigger and enable the RTC TimeStamp using the
+ HAL_RTC_SetTimeStamp() function. You can also configure the RTC TimeStamp with
+ interrupt mode using the HAL_RTC_SetTimeStamp_IT() function.
+ (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTC_GetTimeStamp()
+ function.
+ (+) The TIMESTAMP alternate function can be mapped either to RTC_AF1 (PC13)
+ or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TSINSEL bit in
+ RTC_TAFCR register. The corresponding pin is also selected by HAL_RTC_SetTimeStamp()
+ or HAL_RTC_SetTimeStamp_IT() function.
+
+ *** Tamper configuration ***
+ ============================
+ [..]
+ (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge
+ or Level according to the Tamper filter (if equal to 0 Edge else Level)
+ value, sampling frequency, precharge or discharge and Pull-UP using the
+ HAL_RTC_SetTamper() function. You can configure RTC Tamper in interrupt
+ mode using HAL_RTC_SetTamper_IT() function.
+ (+) The TAMPER1 alternate function can be mapped either to RTC_AF1 (PC13)
+ or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TAMP1INSEL bit in
+ RTC_TAFCR register. The corresponding pin is also selected by HAL_RTC_SetTamper()
+ or HAL_RTC_SetTamper_IT() function.
+
+ *** Backup Data Registers configuration ***
+ ===========================================
+ [..]
+ (+) To write to the RTC Backup Data registers, use the HAL_RTC_BKUPWrite()
+ function.
+ (+) To read the RTC Backup Data registers, use the HAL_RTC_BKUPRead()
+ function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RTCEx RTCEx
+ * @brief RTC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RTCEx_Exported_Functions_Group1 RTC TimeStamp and Tamper functions
+ * @brief RTC TimeStamp and Tamper functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC TimeStamp and Tamper functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure TimeStamp feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets TimeStamp.
+ * @note This API must be called before enabling the TimeStamp feature.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is
+ * activated.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+ * rising edge of the related pin.
+ * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+ * falling edge of the related pin.
+ * @param RTC_TimeStampPin: specifies the RTC TimeStamp Pin.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
+ * @arg RTC_TIMESTAMPPIN_POS1: PI8/PA0 is selected as RTC TimeStamp Pin.
+ * (PI8 for all STM32 devices except for STM32F446xx devices the PA0 is used)
+ * @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+ assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ tmpreg|= TimeStampEdge;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
+ hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets TimeStamp with Interrupt.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note This API must be called before enabling the TimeStamp feature.
+ * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is
+ * activated.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+ * rising edge of the related pin.
+ * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+ * falling edge of the related pin.
+ * @param RTC_TimeStampPin: Specifies the RTC TimeStamp Pin.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
+ * @arg RTC_TIMESTAMPPIN_PI8: PI8 is selected as RTC TimeStamp Pin. (not applicable in the case of STM32F446xx devices)
+ * @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+ assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ tmpreg |= TimeStampEdge;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
+ hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
+
+ /* Clear RTC Timestamp flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+ __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+ /* Enable IT timestamp */
+ __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS);
+
+ /* RTC timestamp Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+
+ EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates TimeStamp.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the RTC TimeStamp value.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTimeStamp: Pointer to Time structure
+ * @param sTimeStampDate: Pointer to Date structure
+ * @param Format: specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * RTC_FORMAT_BIN: Binary data format
+ * RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format)
+{
+ uint32_t tmptime = 0U, tmpdate = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get the TimeStamp time and date registers values */
+ tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
+ tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
+
+ /* Fill the Time structure fields with the read parameters */
+ sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16U);
+ sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8U);
+ sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU));
+ sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16U);
+ sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
+
+ /* Fill the Date structure fields with the read parameters */
+ sTimeStampDate->Year = 0U;
+ sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8U);
+ sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU));
+ sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13U);
+
+ /* Check the input parameters format */
+ if(Format == RTC_FORMAT_BIN)
+ {
+ /* Convert the TimeStamp structure parameters to Binary format */
+ sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
+ sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
+ sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
+
+ /* Convert the DateTimeStamp structure parameters to Binary format */
+ sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
+ sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
+ sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
+ }
+
+ /* Clear the TIMESTAMP Flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets Tamper
+ * @note By calling this API we disable the tamper interrupt for all tampers.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTamper: Pointer to Tamper Structure.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+ assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
+ assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+ assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+ assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+ assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+ assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+ assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+ {
+ sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);
+ }
+
+ tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger |\
+ (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
+ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS |\
+ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
+ (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL | (uint32_t)RTC_TAFCR_TAMPIE);
+
+ hrtc->Instance->TAFCR |= tmpreg;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets Tamper with interrupt.
+ * @note By calling this API we force the tamper interrupt for all tampers.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTamper: Pointer to RTC Tamper.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+ assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
+ assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+ assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+ assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+ assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+ assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+ assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Configure the tamper trigger */
+ if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+ {
+ sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);
+ }
+
+ tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger |\
+ (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
+ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS |\
+ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
+ (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL);
+
+ hrtc->Instance->TAFCR |= tmpreg;
+
+ /* Configure the Tamper Interrupt in the RTC_TAFCR */
+ hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE;
+
+ if(sTamper->Tamper == RTC_TAMPER_1)
+ {
+ /* Clear RTC Tamper 1 flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);
+ }
+ else
+ {
+ /* Clear RTC Tamper 2 flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+ }
+
+ /* RTC Tamper Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+
+ EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates Tamper.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Tamper: Selected tamper pin.
+ * This parameter can be RTC_Tamper_1 and/or RTC_TAMPER_2.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)
+{
+ assert_param(IS_RTC_TAMPER(Tamper));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the selected Tamper pin */
+ hrtc->Instance->TAFCR &= (uint32_t)~Tamper;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles TimeStamp interrupt request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+ if(__HAL_RTC_TIMESTAMP_GET_IT(hrtc, RTC_IT_TS))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_TS) != (uint32_t)RESET)
+ {
+ /* TIMESTAMP callback */
+ HAL_RTCEx_TimeStampEventCallback(hrtc);
+
+ /* Clear the TIMESTAMP interrupt pending bit */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc,RTC_FLAG_TSF);
+ }
+ }
+
+ /* Get the status of the Interrupt */
+ if(__HAL_RTC_TAMPER_GET_IT(hrtc,RTC_IT_TAMP1))
+ {
+ /* Get the TAMPER Interrupt enable bit and pending bit */
+ if(((hrtc->Instance->TAFCR & (RTC_TAFCR_TAMPIE))) != (uint32_t)RESET)
+ {
+ /* Tamper callback */
+ HAL_RTCEx_Tamper1EventCallback(hrtc);
+
+ /* Clear the Tamper interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+ }
+ }
+
+ /* Get the status of the Interrupt */
+ if(__HAL_RTC_TAMPER_GET_IT(hrtc, RTC_IT_TAMP2))
+ {
+ /* Get the TAMPER Interrupt enable bit and pending bit */
+ if(((hrtc->Instance->TAFCR & RTC_TAFCR_TAMPIE)) != (uint32_t)RESET)
+ {
+ /* Tamper callback */
+ HAL_RTCEx_Tamper2EventCallback(hrtc);
+
+ /* Clear the Tamper interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+ }
+ }
+ /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief TimeStamp callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_TimeStampEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tamper 1 callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_Tamper1EventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tamper 2 callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_Tamper2EventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles TimeStamp polling request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET)
+ {
+ if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET)
+ {
+ /* Clear the TIMESTAMP Overrun Flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
+
+ /* Change TIMESTAMP state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Tamper1 Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F)== RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Tamper2 Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP2F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Exported_Functions_Group2 RTC Wake-up functions
+ * @brief RTC Wake-up functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Wake-up functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Wake-up feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets wake up timer.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param WakeUpCounter: Wake up counter
+ * @param WakeUpClock: Wake up clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+ assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /*Check RTC WUTWF flag is reset only when wake up timer enabled*/
+ if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
+ {
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear the Wake-up Timer clock source bits in CR register */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+ /* Configure the clock source */
+ hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+ /* Configure the Wake-up Timer counter */
+ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+ /* Enable the Wake-up Timer */
+ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets wake up timer with interrupt
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param WakeUpCounter: Wake up counter
+ * @param WakeUpClock: Wake up clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+ __IO uint32_t count;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+ assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Check RTC WUTWF flag is reset only when wake up timer enabled */
+ if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
+ {
+ /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */
+ count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET);
+ }
+
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET);
+
+ /* Configure the Wake-up Timer counter */
+ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+ /* Clear the Wake-up Timer clock source bits in CR register */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+ /* Configure the clock source */
+ hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+ /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
+
+ EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT;
+
+ /* Clear RTC Wake Up timer Flag */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+ /* Configure the Interrupt in the RTC_CR register */
+ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT);
+
+ /* Enable the Wake-up Timer */
+ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates wake up timer counter.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Disable the Wake-up Timer */
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets wake up timer counter.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval Counter value
+ */
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+ /* Get the counter value */
+ return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));
+}
+
+/**
+ * @brief This function handles Wake Up Timer interrupt request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+ if(__HAL_RTC_WAKEUPTIMER_GET_IT(hrtc, RTC_IT_WUT))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_WUT) != (uint32_t)RESET)
+ {
+ /* WAKEUPTIMER callback */
+ HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
+
+ /* Clear the WAKEUPTIMER interrupt pending bit */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+ }
+ }
+
+ /* Clear the EXTI's line Flag for RTC WakeUpTimer */
+ __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief Wake Up Timer callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_WakeUpTimerEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles Wake Up Timer Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the WAKEUPTIMER Flag */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RTCEx_Exported_Functions_Group3 Extension Peripheral Control functions
+ * @brief Extension Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Write a data in a specified RTC Backup data register
+ (+) Read a data in a specified RTC Backup data register
+ (+) Set the Coarse calibration parameters.
+ (+) Deactivate the Coarse calibration parameters
+ (+) Set the Smooth calibration parameters.
+ (+) Configure the Synchronization Shift Control Settings.
+ (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ (+) Enable the RTC reference clock detection.
+ (+) Disable the RTC reference clock detection.
+ (+) Enable the Bypass Shadow feature.
+ (+) Disable the Bypass Shadow feature.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Writes a data in a specified RTC Backup data register.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param BackupRegister: RTC Backup data Register number.
+ * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
+ * specify the register.
+ * @param Data: Data to be written in the specified RTC Backup data register.
+ * @retval None
+ */
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_BKP(BackupRegister));
+
+ tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+ tmp += (BackupRegister * 4U);
+
+ /* Write the specified register */
+ *(__IO uint32_t *)tmp = (uint32_t)Data;
+}
+
+/**
+ * @brief Reads data from the specified RTC Backup data Register.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param BackupRegister: RTC Backup data Register number.
+ * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
+ * specify the register.
+ * @retval Read value
+ */
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_BKP(BackupRegister));
+
+ tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+ tmp += (BackupRegister * 4U);
+
+ /* Read the specified register */
+ return (*(__IO uint32_t *)tmp);
+}
+
+/**
+ * @brief Sets the Coarse calibration parameters.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param CalibSign: Specifies the sign of the coarse calibration value.
+ * This parameter can be one of the following values :
+ * @arg RTC_CALIBSIGN_POSITIVE: The value sign is positive
+ * @arg RTC_CALIBSIGN_NEGATIVE: The value sign is negative
+ * @param Value: value of coarse calibration expressed in ppm (coded on 5 bits).
+ *
+ * @note This Calibration value should be between 0 and 63 when using negative
+ * sign with a 2-ppm step.
+ *
+ * @note This Calibration value should be between 0 and 126 when using positive
+ * sign with a 4-ppm step.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef* hrtc, uint32_t CalibSign, uint32_t Value)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_CALIB_SIGN(CalibSign));
+ assert_param(IS_RTC_CALIB_VALUE(Value));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Enable the Coarse Calibration */
+ __HAL_RTC_COARSE_CALIB_ENABLE(hrtc);
+
+ /* Set the coarse calibration value */
+ hrtc->Instance->CALIBR = (uint32_t)(CalibSign|Value);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Coarse calibration parameters.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Enable the Coarse Calibration */
+ __HAL_RTC_COARSE_CALIB_DISABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets the Smooth calibration parameters.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param SmoothCalibPeriod: Select the Smooth Calibration Period.
+ * This parameter can be can be one of the following values :
+ * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
+ * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
+ * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
+ * @param SmoothCalibPlusPulses: Select to Set or reset the CALP bit.
+ * This parameter can be one of the following values:
+ * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.
+ * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
+ * @param SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits.
+ * This parameter can be one any value from 0 to 0x000001FF.
+ * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses
+ * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field
+ * SmouthCalibMinusPulsesValue must be equal to 0.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
+ assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
+ assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* check if a calibration is pending*/
+ if((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* check if a calibration is pending*/
+ while((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Configure the Smooth calibration settings */
+ hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmouthCalibMinusPulsesValue);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Synchronization Shift Control Settings.
+ * @note When REFCKON is set, firmware must not write to Shift control register.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param ShiftAdd1S: Select to add or not 1 second to the time calendar.
+ * This parameter can be one of the following values :
+ * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.
+ * @arg RTC_SHIFTADD1S_RESET: No effect.
+ * @param ShiftSubFS: Select the number of Second Fractions to substitute.
+ * This parameter can be one any value from 0 to 0x7FFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
+ assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the shift is completed*/
+ while((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check if the reference clock detection is disabled */
+ if((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET)
+ {
+ /* Configure the Shift settings */
+ hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
+
+ /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+ else
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param CalibOutput: Select the Calibration output Selection .
+ * This parameter can be one of the following values:
+ * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.
+ * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Clear flags before config */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
+
+ /* Configure the RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)CalibOutput;
+
+ __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the RTC reference clock detection.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the RTC reference clock detection.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the Bypass Shadow feature.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note When the Bypass Shadow is enabled the calendar value are taken
+ * directly from the Calendar counter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set the BYPSHAD bit */
+ hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables the Bypass Shadow feature.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note When the Bypass Shadow is enabled the calendar value are taken
+ * directly from the Calendar counter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Reset the BYPSHAD bit */
+ hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+ /** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) RTC Alarm B callback
+ (+) RTC Poll for Alarm B request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Alarm B callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_AlarmBEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles AlarmB Polling request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Alarm Flag */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1005 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RTC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_EX_H
+#define __STM32F4xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t PinSelection; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
+ * @{
+ */
+#define RTC_BKP_DR0 ((uint32_t)0x00000000U)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001U)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002U)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003U)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004U)
+#define RTC_BKP_DR5 ((uint32_t)0x00000005U)
+#define RTC_BKP_DR6 ((uint32_t)0x00000006U)
+#define RTC_BKP_DR7 ((uint32_t)0x00000007U)
+#define RTC_BKP_DR8 ((uint32_t)0x00000008U)
+#define RTC_BKP_DR9 ((uint32_t)0x00000009U)
+#define RTC_BKP_DR10 ((uint32_t)0x0000000AU)
+#define RTC_BKP_DR11 ((uint32_t)0x0000000BU)
+#define RTC_BKP_DR12 ((uint32_t)0x0000000CU)
+#define RTC_BKP_DR13 ((uint32_t)0x0000000DU)
+#define RTC_BKP_DR14 ((uint32_t)0x0000000EU)
+#define RTC_BKP_DR15 ((uint32_t)0x0000000FU)
+#define RTC_BKP_DR16 ((uint32_t)0x00000010U)
+#define RTC_BKP_DR17 ((uint32_t)0x00000011U)
+#define RTC_BKP_DR18 ((uint32_t)0x00000012U)
+#define RTC_BKP_DR19 ((uint32_t)0x00000013U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000U)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection
+ * @{
+ */
+#define RTC_TAMPERPIN_DEFAULT ((uint32_t)0x00000000U)
+#define RTC_TAMPERPIN_POS1 ((uint32_t)0x00010000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000U)
+#define RTC_TIMESTAMPPIN_POS1 ((uint32_t)0x00020000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000U)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002U)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000U) /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800U) /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000U) /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800U) /*!< Tamper is activated after 8
+ consecutive samples at the active level. */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000U) /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000U) /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000U) /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000U) /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event is not saved */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000U)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001U)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002U)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003U)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004U)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions
+ * @{
+ */
+#define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000U)
+#define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+ period is 8s, else 2exp18 RTCCLK seconds */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000U) /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000U) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000U)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000U)
+/**
+ * @}
+ */
+
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000U)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+ * @{
+ */
+
+/* ---------------------------------WAKEUPTIMER---------------------------------*/
+/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+ * @brief Disable the RTC Wake-up Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Enable interrupt on the RTC Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable event on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable event on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Clear the RTC Wake-up Timer associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @}
+ */
+
+/* ---------------------------------TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Timestamp RTC Timestamp
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp flag to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @}
+ */
+
+/* ---------------------------------TAMPER------------------------------------*/
+/** @defgroup RTCEx_Tamper RTC Tamper
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
+
+/**
+ * @brief Disable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
+
+/**
+ * @brief Enable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
+
+/**
+ * @brief Disable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @arg RTC_IT_TAMP2
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP: Tamper interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+/**
+ * @}
+ */
+
+/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
+ * @{
+ */
+
+/**
+ * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+/**
+ * @}
+ */
+
+/* ------------------------------Calibration----------------------------------*/
+/** @defgroup RTCEx_Calibration RTC Calibration
+ * @{
+ */
+
+/**
+ * @brief Enable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
+
+/**
+ * @brief Disable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+ * @{
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group1
+ * @{
+ */
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group2
+ * @{
+ */
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3
+ * @{
+ */
+/* Extension Control functions ************************************************/
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group4
+ * @{
+ */
+/* Extension RTC features functions *******************************************/
+void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+ * @{
+ */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+ * @{
+ */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+ * @{
+ */
+#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
+ ((BKP) == RTC_BKP_DR1) || \
+ ((BKP) == RTC_BKP_DR2) || \
+ ((BKP) == RTC_BKP_DR3) || \
+ ((BKP) == RTC_BKP_DR4) || \
+ ((BKP) == RTC_BKP_DR5) || \
+ ((BKP) == RTC_BKP_DR6) || \
+ ((BKP) == RTC_BKP_DR7) || \
+ ((BKP) == RTC_BKP_DR8) || \
+ ((BKP) == RTC_BKP_DR9) || \
+ ((BKP) == RTC_BKP_DR10) || \
+ ((BKP) == RTC_BKP_DR11) || \
+ ((BKP) == RTC_BKP_DR12) || \
+ ((BKP) == RTC_BKP_DR13) || \
+ ((BKP) == RTC_BKP_DR14) || \
+ ((BKP) == RTC_BKP_DR15) || \
+ ((BKP) == RTC_BKP_DR16) || \
+ ((BKP) == RTC_BKP_DR17) || \
+ ((BKP) == RTC_BKP_DR18) || \
+ ((BKP) == RTC_BKP_DR19))
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
+
+#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \
+ ((PIN) == RTC_TAMPERPIN_POS1))
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \
+ ((PIN) == RTC_TIMESTAMPPIN_POS1))
+
+#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU)
+#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
+ ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
+
+#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20U)
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU)
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU)
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2183 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SAI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Serial Audio Interface (SAI) peripheral:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+
+ [..]
+ The SAI HAL driver can be used as follows:
+
+ (#) Declare a SAI_HandleTypeDef handle structure (eg. SAI_HandleTypeDef hsai).
+ (#) Initialize the SAI low level resources by implementing the HAL_SAI_MspInit() API:
+ (##) Enable the SAI interface clock.
+ (##) SAI pins configuration:
+ (+++) Enable the clock for the SAI GPIOs.
+ (+++) Configure these SAI pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_SAI_Transmit_IT()
+ and HAL_SAI_Receive_IT() APIs):
+ (+++) Configure the SAI interrupt priority.
+ (+++) Enable the NVIC SAI IRQ handle.
+
+ (##) DMA Configuration if you need to use DMA process (HAL_SAI_Transmit_DMA()
+ and HAL_SAI_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the SAI DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+ DMA Tx/Rx Stream.
+
+ (#) The initialization can be done by two ways
+ (##) Expert mode : Initialize the structures Init, FrameInit and SlotInit and call HAL_SAI_Init().
+ (##) Simplified mode : Initialize the high part of Init Structure and call HAL_SAI_InitProtocol().
+
+ [..]
+ (@) The specific SAI interrupts (FIFO request and Overrun underrun interrupt)
+ will be managed using the macros __HAL_SAI_ENABLE_IT() and __HAL_SAI_DISABLE_IT()
+ inside the transmit and receive process.
+
+ [..]
+ (@) SAI Clock Source configuration is managed differently depending on the selected
+ STM32F4 devices :
+ (+@) For STM32F446xx devices, the configuration is managed through RCCEx_PeriphCLKConfig()
+ function in the HAL RCC drivers
+ (+@) For STM32F439xx/STM32F437xx/STM32F429xx/STM32F427xx devices, the configuration
+ is managed within HAL SAI drivers through HAL_SAI_Init() function using
+ ClockSource field of SAI_InitTypeDef structure.
+ [..]
+ (@) Make sure that either:
+ (+@) I2S PLL is configured or
+ (+@) SAI PLL is configured or
+ (+@) External clock source is configured after setting correctly
+ the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file.
+ [..]
+ (@) In master Tx mode: enabling the audio block immediately generates the bit clock
+ for the external slaves even if there is no data in the FIFO, However FS signal
+ generation is conditioned by the presence of data in the FIFO.
+
+ [..]
+ (@) In master Rx mode: enabling the audio block immediately generates the bit clock
+ and FS signal for the external slaves.
+
+ [..]
+ (@) It is mandatory to respect the following conditions in order to avoid bad SAI behavior:
+ (+@) First bit Offset <= (SLOT size - Data size)
+ (+@) Data size <= SLOT size
+ (+@) Number of SLOT x SLOT size = Frame length
+ (+@) The number of slots should be even when SAI_FS_CHANNEL_IDENTIFICATION is selected.
+
+ [..]
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_SAI_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_SAI_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non-blocking mode using HAL_SAI_Transmit_IT()
+ (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_SAI_TxCpltCallback()
+ (+) Receive an amount of data in non-blocking mode using HAL_SAI_Receive_IT()
+ (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_SAI_RxCpltCallback()
+ (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SAI_ErrorCallback()
+
+ *** DMA mode IO operation ***
+ =============================
+ [..]
+ (+) Send an amount of data in non-blocking mode (DMA) using HAL_SAI_Transmit_DMA()
+ (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_SAI_TxCpltCallback()
+ (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SAI_Receive_DMA()
+ (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_SAI_RxCpltCallback()
+ (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SAI_ErrorCallback()
+ (+) Pause the DMA Transfer using HAL_SAI_DMAPause()
+ (+) Resume the DMA Transfer using HAL_SAI_DMAResume()
+ (+) Stop the DMA Transfer using HAL_SAI_DMAStop()
+
+ *** SAI HAL driver additional function list ***
+ ===============================================
+ [..]
+ Below the list the others API available SAI HAL driver :
+
+ (+) HAL_SAI_EnableTxMuteMode(): Enable the mute in tx mode
+ (+) HAL_SAI_DisableTxMuteMode(): Disable the mute in tx mode
+ (+) HAL_SAI_EnableRxMuteMode(): Enable the mute in Rx mode
+ (+) HAL_SAI_DisableRxMuteMode(): Disable the mute in Rx mode
+ (+) HAL_SAI_FlushRxFifo(): Flush the rx fifo.
+ (+) HAL_SAI_Abort(): Abort the current transfer
+
+ *** SAI HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in SAI HAL driver :
+
+ (+) __HAL_SAI_ENABLE(): Enable the SAI peripheral
+ (+) __HAL_SAI_DISABLE(): Disable the SAI peripheral
+ (+) __HAL_SAI_ENABLE_IT(): Enable the specified SAI interrupts
+ (+) __HAL_SAI_DISABLE_IT(): Disable the specified SAI interrupts
+ (+) __HAL_SAI_GET_IT_SOURCE(): Check if the specified SAI interrupt source is
+ enabled or disabled
+ (+) __HAL_SAI_GET_FLAG(): Check whether the specified SAI flag is set or not
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SAI SAI
+ * @brief SAI HAL module driver
+ * @{
+ */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @defgroup SAI_Private_Typedefs SAI Private Typedefs
+ * @{
+ */
+typedef enum {
+ SAI_MODE_DMA,
+ SAI_MODE_IT
+}SAI_ModeTypedef;
+/**
+ * @}
+ */
+
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup SAI_Private_Constants SAI Private Constants
+ * @{
+ */
+#define SAI_FIFO_SIZE 8U
+#define SAI_DEFAULT_TIMEOUT 4U /* 4ms */
+#define SAI_xCR2_MUTECNT_OFFSET POSITION_VAL(SAI_xCR2_MUTECNT)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup SAI_Private_Functions SAI Private Functions
+ * @{
+ */
+static void SAI_FillFifo(SAI_HandleTypeDef *hsai);
+static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode);
+static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+
+static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai);
+
+static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMAError(DMA_HandleTypeDef *hdma);
+static void SAI_DMAAbort(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Functions SAI Exported Functions
+ * @{
+ */
+
+/** @defgroup SAI_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the SAIx peripheral:
+
+ (+) User must implement HAL_SAI_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_SAI_Init() to configure the selected device with
+ the selected configuration:
+ (++) Mode (Master/slave TX/RX)
+ (++) Protocol
+ (++) Data Size
+ (++) MCLK Output
+ (++) Audio frequency
+ (++) FIFO Threshold
+ (++) Frame Config
+ (++) Slot Config
+
+ (+) Call the function HAL_SAI_DeInit() to restore the default configuration
+ of the selected SAI peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the structure FrameInit, SlotInit and the low part of
+ * Init according to the specified parameters and call the function
+ * HAL_SAI_Init to initialize the SAI block.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param protocol: one of the supported protocol @ref SAI_Protocol
+ * @param datasize: one of the supported datasize @ref SAI_Protocol_DataSize
+ * the configuration information for SAI module.
+ * @param nbslot: Number of slot.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
+ assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
+
+ switch(protocol)
+ {
+ case SAI_I2S_STANDARD :
+ case SAI_I2S_MSBJUSTIFIED :
+ case SAI_I2S_LSBJUSTIFIED :
+ status = SAI_InitI2S(hsai, protocol, datasize, nbslot);
+ break;
+ case SAI_PCM_LONG :
+ case SAI_PCM_SHORT :
+ status = SAI_InitPCM(hsai, protocol, datasize, nbslot);
+ break;
+ default :
+ status = HAL_ERROR;
+ break;
+ }
+
+ if(status == HAL_OK)
+ {
+ status = HAL_SAI_Init(hsai);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Initialize the SAI according to the specified parameters.
+ * in the SAI_InitTypeDef structure and initialize the associated handle.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai)
+{
+ uint32_t tmpregisterGCR = 0U;
+
+ /* This variable used to store the SAI_CK_x (value in Hz) */
+ uint32_t freq = 0U;
+
+ /* This variable is used to compute CKSTR bits of SAI CR1 according to
+ ClockStrobing and AudioMode fields */
+ uint32_t ckstr_bits = 0U;
+ uint32_t syncen_bits = 0U;
+
+ /* Check the SAI handle allocation */
+ if(hsai == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* check the instance */
+ assert_param(IS_SAI_ALL_INSTANCE(hsai->Instance));
+
+ /* Check the SAI Block parameters */
+ assert_param(IS_SAI_AUDIO_FREQUENCY(hsai->Init.AudioFrequency));
+ assert_param(IS_SAI_BLOCK_PROTOCOL(hsai->Init.Protocol));
+ assert_param(IS_SAI_BLOCK_MODE(hsai->Init.AudioMode));
+ assert_param(IS_SAI_BLOCK_SYNCEXT(hsai->Init.SynchroExt));
+ assert_param(IS_SAI_BLOCK_DATASIZE(hsai->Init.DataSize));
+ assert_param(IS_SAI_BLOCK_FIRST_BIT(hsai->Init.FirstBit));
+ assert_param(IS_SAI_BLOCK_CLOCK_STROBING(hsai->Init.ClockStrobing));
+ assert_param(IS_SAI_BLOCK_SYNCHRO(hsai->Init.Synchro));
+ assert_param(IS_SAI_BLOCK_OUTPUT_DRIVE(hsai->Init.OutputDrive));
+ assert_param(IS_SAI_BLOCK_NODIVIDER(hsai->Init.NoDivider));
+ assert_param(IS_SAI_BLOCK_FIFO_THRESHOLD(hsai->Init.FIFOThreshold));
+ assert_param(IS_SAI_MONO_STEREO_MODE(hsai->Init.MonoStereoMode));
+ assert_param(IS_SAI_BLOCK_COMPANDING_MODE(hsai->Init.CompandingMode));
+ assert_param(IS_SAI_BLOCK_TRISTATE_MANAGEMENT(hsai->Init.TriState));
+
+ /* Check the SAI Block Frame parameters */
+ assert_param(IS_SAI_BLOCK_FRAME_LENGTH(hsai->FrameInit.FrameLength));
+ assert_param(IS_SAI_BLOCK_ACTIVE_FRAME(hsai->FrameInit.ActiveFrameLength));
+ assert_param(IS_SAI_BLOCK_FS_DEFINITION(hsai->FrameInit.FSDefinition));
+ assert_param(IS_SAI_BLOCK_FS_POLARITY(hsai->FrameInit.FSPolarity));
+ assert_param(IS_SAI_BLOCK_FS_OFFSET(hsai->FrameInit.FSOffset));
+
+ /* Check the SAI Block Slot parameters */
+ assert_param(IS_SAI_BLOCK_FIRSTBIT_OFFSET(hsai->SlotInit.FirstBitOffset));
+ assert_param(IS_SAI_BLOCK_SLOT_SIZE(hsai->SlotInit.SlotSize));
+ assert_param(IS_SAI_BLOCK_SLOT_NUMBER(hsai->SlotInit.SlotNumber));
+ assert_param(IS_SAI_SLOT_ACTIVE(hsai->SlotInit.SlotActive));
+
+ if(hsai->State == HAL_SAI_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hsai->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_SAI_MspInit(hsai);
+ }
+
+ hsai->State = HAL_SAI_STATE_BUSY;
+
+ /* Disable the selected SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* SAI Block Synchro Configuration -----------------------------------------*/
+ SAI_BlockSynchroConfig(hsai);
+
+ /* Configure Master Clock using the following formula :
+ MCLK_x = SAI_CK_x / (MCKDIV[3:0] * 2) with MCLK_x = 256 * FS
+ FS = SAI_CK_x / (MCKDIV[3:0] * 2) * 256
+ MCKDIV[3:0] = SAI_CK_x / FS * 512 */
+ if(hsai->Init.AudioFrequency != SAI_AUDIO_FREQUENCY_MCKDIV)
+ {
+ /* Get SAI clock source based on Source clock selection from RCC */
+ freq = SAI_GetInputClock(hsai);
+
+ /* (saiclocksource x 10) to keep Significant digits */
+ tmpregisterGCR = (((freq * 10U) / ((hsai->Init.AudioFrequency) * 512U)));
+
+ hsai->Init.Mckdiv = tmpregisterGCR / 10U;
+
+ /* Round result to the nearest integer */
+ if((tmpregisterGCR % 10U) > 8U)
+ {
+ hsai->Init.Mckdiv+= 1U;
+ }
+ }
+
+ /* Compute CKSTR bits of SAI CR1 according to ClockStrobing and AudioMode */
+ if((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+ {
+ ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? 0U: SAI_xCR1_CKSTR;
+ }
+ else
+ {
+ ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? SAI_xCR1_CKSTR: 0U;
+ }
+
+ /* SAI Block Configuration -------------------------------------------------*/
+ switch(hsai->Init.Synchro)
+ {
+ case SAI_ASYNCHRONOUS :
+ {
+ syncen_bits = 0U;
+ }
+ break;
+ case SAI_SYNCHRONOUS :
+ {
+ syncen_bits = SAI_xCR1_SYNCEN_0;
+ }
+ break;
+ case SAI_SYNCHRONOUS_EXT_SAI1 :
+ case SAI_SYNCHRONOUS_EXT_SAI2 :
+ {
+ syncen_bits = SAI_xCR1_SYNCEN_1;
+ }
+ break;
+ default:
+ break;
+ }
+ /* SAI CR1 Configuration */
+ hsai->Instance->CR1 &= ~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG | SAI_xCR1_DS | \
+ SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN |\
+ SAI_xCR1_MONO | SAI_xCR1_OUTDRIV | SAI_xCR1_DMAEN | \
+ SAI_xCR1_NODIV | SAI_xCR1_MCKDIV);
+
+ hsai->Instance->CR1 |= (hsai->Init.AudioMode | hsai->Init.Protocol | \
+ hsai->Init.DataSize | hsai->Init.FirstBit | \
+ ckstr_bits | syncen_bits | \
+ hsai->Init.MonoStereoMode | hsai->Init.OutputDrive | \
+ hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20U));
+
+ /* SAI CR2 Configuration */
+ hsai->Instance->CR2 &= ~(SAI_xCR2_FTH | SAI_xCR2_FFLUSH | SAI_xCR2_COMP | SAI_xCR2_CPL);
+ hsai->Instance->CR2 |= (hsai->Init.FIFOThreshold | hsai->Init.CompandingMode | hsai->Init.TriState);
+
+ /* SAI Frame Configuration -----------------------------------------*/
+ hsai->Instance->FRCR&=(~(SAI_xFRCR_FRL | SAI_xFRCR_FSALL | SAI_xFRCR_FSDEF | \
+ SAI_xFRCR_FSPOL | SAI_xFRCR_FSOFF));
+ hsai->Instance->FRCR|=((hsai->FrameInit.FrameLength - 1U) |
+ hsai->FrameInit.FSOffset |
+ hsai->FrameInit.FSDefinition |
+ hsai->FrameInit.FSPolarity |
+ ((hsai->FrameInit.ActiveFrameLength - 1U) << 8U));
+
+ /* SAI Block_x SLOT Configuration ------------------------------------------*/
+ /* This register has no meaning in AC 97 and SPDIF audio protocol */
+ hsai->Instance->SLOTR &= ~(SAI_xSLOTR_FBOFF | SAI_xSLOTR_SLOTSZ | \
+ SAI_xSLOTR_NBSLOT | SAI_xSLOTR_SLOTEN );
+
+ hsai->Instance->SLOTR |= hsai->SlotInit.FirstBitOffset | hsai->SlotInit.SlotSize | \
+ (hsai->SlotInit.SlotActive << 16U) | ((hsai->SlotInit.SlotNumber - 1U) << 8U);
+
+ /* Initialize the error code */
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+ /* Initialize the SAI state */
+ hsai->State= HAL_SAI_STATE_READY;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the SAI peripheral.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai)
+{
+ /* Check the SAI handle allocation */
+ if(hsai == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hsai->State = HAL_SAI_STATE_BUSY;
+
+ /* Disabled All interrupt and clear all the flag */
+ hsai->Instance->IMR = 0U;
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Disable the SAI */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_SAI_MspDeInit(hsai);
+
+ /* Initialize the error code */
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+ /* Initialize the SAI state */
+ hsai->State = HAL_SAI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the SAI MSP.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the SAI MSP.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SAI data
+ transfers.
+
+ (+) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated SAI IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (+) Blocking mode functions are :
+ (++) HAL_SAI_Transmit()
+ (++) HAL_SAI_Receive()
+ (++) HAL_SAI_TransmitReceive()
+
+ (+) Non Blocking mode functions with Interrupt are :
+ (++) HAL_SAI_Transmit_IT()
+ (++) HAL_SAI_Receive_IT()
+ (++) HAL_SAI_TransmitReceive_IT()
+
+ (+) Non Blocking mode functions with DMA are :
+ (++) HAL_SAI_Transmit_DMA()
+ (++) HAL_SAI_Receive_DMA()
+ (++) HAL_SAI_TransmitReceive_DMA()
+
+ (+) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_SAI_TxCpltCallback()
+ (++) HAL_SAI_RxCpltCallback()
+ (++) HAL_SAI_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit an amount of data in blocking mode.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t* pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->pBuffPtr = pData;
+ hsai->State = HAL_SAI_STATE_BUSY_TX;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* fill the fifo with data before to enabled the SAI */
+ SAI_FillFifo(hsai);
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ while(hsai->XferCount > 0U)
+ {
+ /* Write data if the FIFO is not full */
+ if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL)
+ {
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ hsai->Instance->DR = (*hsai->pBuffPtr++);
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ hsai->Instance->DR = *((uint16_t *)hsai->pBuffPtr);
+ hsai->pBuffPtr+= 2U;
+ }
+ else
+ {
+ hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+ hsai->pBuffPtr+= 4U;
+ }
+ hsai->XferCount--;
+ }
+ else
+ {
+ /* Check for the Timeout */
+ if((Timeout != HAL_MAX_DELAY) && ((Timeout == 0U)||((HAL_GetTick() - tickstart) > Timeout)))
+ {
+ /* Update error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+
+ /* Clear all the flags */
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+ /* Change the SAI state */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->State = HAL_SAI_STATE_BUSY_RX;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Receive data */
+ while(hsai->XferCount > 0U)
+ {
+ if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_EMPTY)
+ {
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ (*hsai->pBuffPtr++) = hsai->Instance->DR;
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ *((uint16_t*)hsai->pBuffPtr) = hsai->Instance->DR;
+ hsai->pBuffPtr+= 2U;
+ }
+ else
+ {
+ *((uint32_t*)hsai->pBuffPtr) = hsai->Instance->DR;
+ hsai->pBuffPtr+= 4U;
+ }
+ hsai->XferCount--;
+ }
+ else
+ {
+ /* Check for the Timeout */
+ if((Timeout != HAL_MAX_DELAY) && ((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)))
+ {
+ /* Update error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+
+ /* Clear all the flags */
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+ /* Change the SAI state */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+ hsai->State = HAL_SAI_STATE_BUSY_TX;
+
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ hsai->InterruptServiceRoutine = SAI_Transmit_IT8Bit;
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ hsai->InterruptServiceRoutine = SAI_Transmit_IT16Bit;
+ }
+ else
+ {
+ hsai->InterruptServiceRoutine = SAI_Transmit_IT32Bit;
+ }
+
+ /* Fill the fifo before starting the communication */
+ SAI_FillFifo(hsai);
+
+ /* Enable FRQ and OVRUDR interrupts */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+ hsai->State = HAL_SAI_STATE_BUSY_RX;
+
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ hsai->InterruptServiceRoutine = SAI_Receive_IT8Bit;
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ hsai->InterruptServiceRoutine = SAI_Receive_IT16Bit;
+ }
+ else
+ {
+ hsai->InterruptServiceRoutine = SAI_Receive_IT32Bit;
+ }
+
+ /* Enable TXE and OVRUDR interrupts */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pause the audio stream playing from the Media.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ /* Pause the audio file playing by disabling the SAI DMA requests */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resume the audio stream playing from the Media.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ /* Enable the SAI DMA requests */
+ hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+ /* If the SAI peripheral is still not enabled, enable it */
+ if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the audio stream playing from the Media.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ /* Disable the SAI DMA request */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ if(HAL_DMA_Abort(hsai->hdmatx) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ if(hsai->hdmarx != NULL)
+ {
+ if(HAL_DMA_Abort(hsai->hdmarx) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Abort the current transfer and disable the SAI.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ /* Check SAI DMA is enabled or not */
+ if((hsai->Instance->CR1 & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN)
+ {
+ /* Disable the SAI DMA request */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ if(HAL_DMA_Abort(hsai->hdmatx) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ if(hsai->hdmarx != NULL)
+ {
+ if(HAL_DMA_Abort(hsai->hdmarx) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Disabled All interrupt and clear all the flag */
+ hsai->Instance->IMR = 0U;
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with DMA.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+ hsai->State = HAL_SAI_STATE_BUSY_TX;
+
+ /* Set the SAI Tx DMA Half transfer complete callback */
+ hsai->hdmatx->XferHalfCpltCallback = SAI_DMATxHalfCplt;
+
+ /* Set the SAI TxDMA transfer complete callback */
+ hsai->hdmatx->XferCpltCallback = SAI_DMATxCplt;
+
+ /* Set the DMA error callback */
+ hsai->hdmatx->XferErrorCallback = SAI_DMAError;
+
+ /* Set the DMA Tx abort callback */
+ hsai->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the Tx DMA Stream */
+ if(HAL_DMA_Start_IT(hsai->hdmatx, (uint32_t)hsai->pBuffPtr, (uint32_t)&hsai->Instance->DR, hsai->XferSize) != HAL_OK)
+ {
+ __HAL_UNLOCK(hsai);
+ return HAL_ERROR;
+ }
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Enable the interrupts for error handling */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+ /* Enable SAI Tx DMA Request */
+ hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with DMA.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+ hsai->State = HAL_SAI_STATE_BUSY_RX;
+
+ /* Set the SAI Rx DMA Half transfer complete callback */
+ hsai->hdmarx->XferHalfCpltCallback = SAI_DMARxHalfCplt;
+
+ /* Set the SAI Rx DMA transfer complete callback */
+ hsai->hdmarx->XferCpltCallback = SAI_DMARxCplt;
+
+ /* Set the DMA error callback */
+ hsai->hdmarx->XferErrorCallback = SAI_DMAError;
+
+ /* Set the DMA Rx abort callback */
+ hsai->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the Rx DMA Stream */
+ if(HAL_DMA_Start_IT(hsai->hdmarx, (uint32_t)&hsai->Instance->DR, (uint32_t)hsai->pBuffPtr, hsai->XferSize) != HAL_OK)
+ {
+ __HAL_UNLOCK(hsai);
+ return HAL_ERROR;
+ }
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Enable the interrupts for error handling */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+ /* Enable SAI Rx DMA Request */
+ hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable the Tx mute mode.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param val: value sent during the mute @ref SAI_Block_Mute_Value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val)
+{
+ assert_param(IS_SAI_BLOCK_MUTE_VALUE(val));
+
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_MUTE | val);
+ return HAL_OK;
+ }
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Disable the Tx mute mode.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
+ return HAL_OK;
+ }
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Enable the Rx mute detection.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param callback: function called when the mute is detected.
+ * @param counter: number a data before mute detection max 63.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter)
+{
+ assert_param(IS_SAI_BLOCK_MUTE_COUNTER(counter));
+
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ /* set the mute counter */
+ CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTECNT);
+ SET_BIT(hsai->Instance->CR2, (uint32_t)((uint32_t)counter << SAI_xCR2_MUTECNT_OFFSET));
+ hsai->mutecallback = callback;
+ /* enable the IT interrupt */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_IT_MUTEDET);
+ return HAL_OK;
+ }
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Disable the Rx mute detection.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ /* set the mutecallback to NULL */
+ hsai->mutecallback = (SAIcallback)NULL;
+ /* enable the IT interrupt */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_IT_MUTEDET);
+ return HAL_OK;
+ }
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Handle SAI interrupt request.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ uint32_t itflags = hsai->Instance->SR;
+ uint32_t itsources = hsai->Instance->IMR;
+ uint32_t cr1config = hsai->Instance->CR1;
+ uint32_t tmperror;
+
+ /* SAI Fifo request interrupt occured ------------------------------------*/
+ if(((itflags & SAI_xSR_FREQ) == SAI_xSR_FREQ) && ((itsources & SAI_IT_FREQ) == SAI_IT_FREQ))
+ {
+ hsai->InterruptServiceRoutine(hsai);
+ }
+ /* SAI Overrun error interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_OVRUDR) == SAI_FLAG_OVRUDR) && ((itsources & SAI_IT_OVRUDR) == SAI_IT_OVRUDR))
+ {
+ /* Clear the SAI Overrun flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+ /* Get the SAI error code */
+ tmperror = ((hsai->State == HAL_SAI_STATE_BUSY_RX) ? HAL_SAI_ERROR_OVR : HAL_SAI_ERROR_UDR);
+
+ /* Change the SAI error code */
+ hsai->ErrorCode |= tmperror;
+
+ /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ /* SAI mutedet interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_MUTEDET) == SAI_FLAG_MUTEDET) && ((itsources & SAI_IT_MUTEDET) == SAI_IT_MUTEDET))
+ {
+ /* Clear the SAI mutedet flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_MUTEDET);
+
+ /* call the call back function */
+ if(hsai->mutecallback != (SAIcallback)NULL)
+ {
+ /* inform the user that an RX mute event has been detected */
+ hsai->mutecallback();
+ }
+ }
+ /* SAI AFSDET interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_AFSDET) == SAI_FLAG_AFSDET) && ((itsources & SAI_IT_AFSDET) == SAI_IT_AFSDET))
+ {
+ /* Change the SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_AFSDET;
+
+ /* Check SAI DMA is enabled or not */
+ if((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN)
+ {
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ /* Set the DMA Tx abort callback */
+ hsai->hdmatx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmatx);
+ }
+ else if(hsai->hdmarx != NULL)
+ {
+ /* Set the DMA Rx abort callback */
+ hsai->hdmarx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmarx);
+ }
+ }
+ else
+ {
+ /* Abort SAI */
+ HAL_SAI_Abort(hsai);
+
+ /* Set error callback */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ }
+ /* SAI LFSDET interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_LFSDET) == SAI_FLAG_LFSDET) && ((itsources & SAI_IT_LFSDET) == SAI_IT_LFSDET))
+ {
+ /* Change the SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_LFSDET;
+
+ /* Check SAI DMA is enabled or not */
+ if((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN)
+ {
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ /* Set the DMA Tx abort callback */
+ hsai->hdmatx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmatx);
+ }
+ else if(hsai->hdmarx != NULL)
+ {
+ /* Set the DMA Rx abort callback */
+ hsai->hdmarx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmarx);
+ }
+ }
+ else
+ {
+ /* Abort SAI */
+ HAL_SAI_Abort(hsai);
+
+ /* Set error callback */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ }
+ /* SAI WCKCFG interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_WCKCFG) == SAI_FLAG_WCKCFG) && ((itsources & SAI_IT_WCKCFG) == SAI_IT_WCKCFG))
+ {
+ /* Change the SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_WCKCFG;
+
+ /* Check SAI DMA is enabled or not */
+ if((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN)
+ {
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ /* Set the DMA Tx abort callback */
+ hsai->hdmatx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmatx);
+ }
+ else if(hsai->hdmarx != NULL)
+ {
+ /* Set the DMA Rx abort callback */
+ hsai->hdmarx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmarx);
+ }
+ }
+ else
+ {
+ /* If WCKCFG occurs, SAI audio block is automatically disabled */
+ /* Disable all interrupts and clear all flags */
+ hsai->Instance->IMR = 0U;
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Set the SAI state to ready to be able to start again the process */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Initialize XferCount */
+ hsai->XferCount = 0U;
+
+ /* SAI error Callback */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ }
+ /* SAI CNRDY interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_CNRDY) == SAI_FLAG_CNRDY) && ((itsources & SAI_IT_CNRDY) == SAI_IT_CNRDY))
+ {
+ /* Clear the SAI CNRDY flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_CNRDY);
+
+ /* Change the SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_CNREADY;
+
+ /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Transfer Half completed callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+ __weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer half completed callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_RxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SAI error callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SAI_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the SAI handle state.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL state
+ */
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai)
+{
+ return hsai->State;
+}
+
+/**
+* @brief Return the SAI error code.
+* @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for the specified SAI Block.
+* @retval SAI Error Code
+*/
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai)
+{
+ return hsai->ErrorCode;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup SAI_Private_Functions
+ * @brief Private functions
+ * @{
+ */
+
+/**
+ * @brief Initialize the SAI I2S protocol according to the specified parameters
+ * in the SAI_InitTypeDef and create the associated handle.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param protocol: one of the supported protocol.
+ * @param datasize: one of the supported datasize @ref SAI_Protocol_DataSize
+ * the configuration information for SAI module.
+ * @param nbslot: number of slot minimum value is 2 and max is 16.
+ * the value must be a multiple of 2.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+ hsai->Init.Protocol = SAI_FREE_PROTOCOL;
+ hsai->Init.FirstBit = SAI_FIRSTBIT_MSB;
+ /* Compute ClockStrobing according AudioMode */
+ if((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+ { /* Transmit */
+ hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE;
+ }
+ else
+ { /* Receive */
+ hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
+ }
+ hsai->FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
+ hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL;
+ hsai->SlotInit.FirstBitOffset = 0U;
+ hsai->SlotInit.SlotNumber = nbslot;
+
+ /* in IS2 the number of slot must be even */
+ if((nbslot & 0x1U) != 0U)
+ {
+ return HAL_ERROR;
+ }
+
+ switch(protocol)
+ {
+ case SAI_I2S_STANDARD :
+ hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
+ hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
+ break;
+ case SAI_I2S_MSBJUSTIFIED :
+ case SAI_I2S_LSBJUSTIFIED :
+ hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH;
+ hsai->FrameInit.FSOffset = SAI_FS_FIRSTBIT;
+ break;
+ default :
+ return HAL_ERROR;
+ }
+
+ /* Frame definition */
+ switch(datasize)
+ {
+ case SAI_PROTOCOL_DATASIZE_16BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_16;
+ hsai->FrameInit.FrameLength = 32U*(nbslot/2U);
+ hsai->FrameInit.ActiveFrameLength = 16U*(nbslot/2U);
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
+ hsai->Init.DataSize = SAI_DATASIZE_16;
+ hsai->FrameInit.FrameLength = 64U*(nbslot/2U);
+ hsai->FrameInit.ActiveFrameLength = 32U*(nbslot/2U);
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_24BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_24;
+ hsai->FrameInit.FrameLength = 64U*(nbslot/2U);
+ hsai->FrameInit.ActiveFrameLength = 32U*(nbslot/2U);
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_32BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_32;
+ hsai->FrameInit.FrameLength = 64U*(nbslot/2U);
+ hsai->FrameInit.ActiveFrameLength = 32U*(nbslot/2U);
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ default :
+ return HAL_ERROR;
+ }
+ if(protocol == SAI_I2S_LSBJUSTIFIED)
+ {
+ if (datasize == SAI_PROTOCOL_DATASIZE_16BITEXTENDED)
+ {
+ hsai->SlotInit.FirstBitOffset = 16U;
+ }
+ if (datasize == SAI_PROTOCOL_DATASIZE_24BIT)
+ {
+ hsai->SlotInit.FirstBitOffset = 8U;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the SAI PCM protocol according to the specified parameters
+ * in the SAI_InitTypeDef and create the associated handle.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param protocol: one of the supported protocol
+ * @param datasize: one of the supported datasize @ref SAI_Protocol_DataSize
+ * @param nbslot: number of slot minimum value is 1 and the max is 16.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+ hsai->Init.Protocol = SAI_FREE_PROTOCOL;
+ hsai->Init.FirstBit = SAI_FIRSTBIT_MSB;
+ /* Compute ClockStrobing according AudioMode */
+ if((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+ { /* Transmit */
+ hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
+ }
+ else
+ { /* Receive */
+ hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE;
+ }
+ hsai->FrameInit.FSDefinition = SAI_FS_STARTFRAME;
+ hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH;
+ hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
+ hsai->SlotInit.FirstBitOffset = 0U;
+ hsai->SlotInit.SlotNumber = nbslot;
+ hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL;
+
+ switch(protocol)
+ {
+ case SAI_PCM_SHORT :
+ hsai->FrameInit.ActiveFrameLength = 1U;
+ break;
+ case SAI_PCM_LONG :
+ hsai->FrameInit.ActiveFrameLength = 13U;
+ break;
+ default :
+ return HAL_ERROR;
+ }
+
+ switch(datasize)
+ {
+ case SAI_PROTOCOL_DATASIZE_16BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_16;
+ hsai->FrameInit.FrameLength = 16U * nbslot;
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
+ hsai->Init.DataSize = SAI_DATASIZE_16;
+ hsai->FrameInit.FrameLength = 32U * nbslot;
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_24BIT :
+ hsai->Init.DataSize = SAI_DATASIZE_24;
+ hsai->FrameInit.FrameLength = 32U * nbslot;
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_32BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_32;
+ hsai->FrameInit.FrameLength = 32U * nbslot;
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ default :
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Fill the fifo.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_FillFifo(SAI_HandleTypeDef *hsai)
+{
+ /* fill the fifo with data before to enabled the SAI */
+ while(((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL) && (hsai->XferCount > 0U))
+ {
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ hsai->Instance->DR = (*hsai->pBuffPtr++);
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+ hsai->pBuffPtr+= 2U;
+ }
+ else
+ {
+ hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+ hsai->pBuffPtr+= 4U;
+ }
+ hsai->XferCount--;
+ }
+}
+
+/**
+ * @brief Return the interrupt flag to set according the SAI setup.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param mode: SAI_MODE_DMA or SAI_MODE_IT
+ * @retval the list of the IT flag to enable
+ */
+static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode)
+{
+ uint32_t tmpIT = SAI_IT_OVRUDR;
+
+ if(mode == SAI_MODE_IT)
+ {
+ tmpIT|= SAI_IT_FREQ;
+ }
+
+ if((hsai->Init.Protocol == SAI_AC97_PROTOCOL) &&
+ ((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODEMASTER_RX)))
+ {
+ tmpIT|= SAI_IT_CNRDY;
+ }
+
+ if((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+ {
+ tmpIT|= SAI_IT_AFSDET | SAI_IT_LFSDET;
+ }
+ else
+ {
+ /* hsai has been configured in master mode */
+ tmpIT|= SAI_IT_WCKCFG;
+ }
+ return tmpIT;
+}
+
+/**
+ * @brief Disable the SAI and wait for the disabling.
+ * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai)
+{
+ register uint32_t count = SAI_DEFAULT_TIMEOUT * (SystemCoreClock /7/1000);
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Disable the SAI instance */
+ __HAL_SAI_DISABLE(hsai);
+
+ do
+ {
+ /* Check for the Timeout */
+ if (count-- == 0)
+ {
+ /* Update error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+ status = HAL_TIMEOUT;
+ break;
+ }
+ } while((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != RESET);
+
+ return status;
+}
+
+/**
+ * @brief Tx Handler for Transmit in Interrupt mode 8-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->XferCount == 0U)
+ {
+ /* Handle the end of the transmission */
+ /* Disable FREQ and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_TxCpltCallback(hsai);
+ }
+ else
+ {
+ /* Write data on DR register */
+ hsai->Instance->DR = (*hsai->pBuffPtr++);
+ hsai->XferCount--;
+ }
+}
+
+/**
+ * @brief Tx Handler for Transmit in Interrupt mode for 16-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->XferCount == 0U)
+ {
+ /* Handle the end of the transmission */
+ /* Disable FREQ and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_TxCpltCallback(hsai);
+ }
+ else
+ {
+ /* Write data on DR register */
+ hsai->Instance->DR = *(uint16_t *)hsai->pBuffPtr;
+ hsai->pBuffPtr+=2U;
+ hsai->XferCount--;
+ }
+}
+
+/**
+ * @brief Tx Handler for Transmit in Interrupt mode for 32-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->XferCount == 0U)
+ {
+ /* Handle the end of the transmission */
+ /* Disable FREQ and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_TxCpltCallback(hsai);
+ }
+ else
+ {
+ /* Write data on DR register */
+ hsai->Instance->DR = *(uint32_t *)hsai->pBuffPtr;
+ hsai->pBuffPtr+=4U;
+ hsai->XferCount--;
+ }
+}
+
+/**
+ * @brief Rx Handler for Receive in Interrupt mode 8-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai)
+{
+ /* Receive data */
+ (*hsai->pBuffPtr++) = hsai->Instance->DR;
+ hsai->XferCount--;
+
+ /* Check end of the transfer */
+ if(hsai->XferCount == 0U)
+ {
+ /* Disable TXE and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Clear the SAI Overrun flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_RxCpltCallback(hsai);
+ }
+}
+
+/**
+ * @brief Rx Handler for Receive in Interrupt mode for 16-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai)
+{
+ /* Receive data */
+ *(uint16_t*)hsai->pBuffPtr = hsai->Instance->DR;
+ hsai->pBuffPtr+=2U;
+ hsai->XferCount--;
+
+ /* Check end of the transfer */
+ if(hsai->XferCount == 0U)
+ {
+ /* Disable TXE and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Clear the SAI Overrun flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_RxCpltCallback(hsai);
+ }
+}
+
+/**
+ * @brief Rx Handler for Receive in Interrupt mode for 32-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai)
+{
+ /* Receive data */
+ *(uint32_t*)hsai->pBuffPtr = hsai->Instance->DR;
+ hsai->pBuffPtr+=4U;
+ hsai->XferCount--;
+
+ /* Check end of the transfer */
+ if(hsai->XferCount == 0U)
+ {
+ /* Disable TXE and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Clear the SAI Overrun flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_RxCpltCallback(hsai);
+ }
+}
+
+/**
+ * @brief DMA SAI transmit process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ hsai->XferCount = 0U;
+
+ /* Disable SAI Tx DMA Request */
+ hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+
+ /* Stop the interrupts error handling */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+ hsai->State= HAL_SAI_STATE_READY;
+ }
+ HAL_SAI_TxCpltCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI transmit process half complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_SAI_TxHalfCpltCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI receive process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ /* Disable Rx DMA Request */
+ hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+ hsai->XferCount = 0U;
+
+ /* Stop the interrupts error handling */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+ hsai->State = HAL_SAI_STATE_READY;
+ }
+ HAL_SAI_RxCpltCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_SAI_RxHalfCpltCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI communication error callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Set SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_DMA;
+
+ if((hsai->hdmatx->ErrorCode == HAL_DMA_ERROR_TE) || (hsai->hdmarx->ErrorCode == HAL_DMA_ERROR_TE))
+ {
+ /* Disable the SAI DMA request */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Set the SAI state ready to be able to start again the process */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Initialize XferCount */
+ hsai->XferCount = 0U;
+ }
+ /* SAI error Callback */
+ HAL_SAI_ErrorCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI Abort callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable DMA request */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Disable all interrupts and clear all flags */
+ hsai->Instance->IMR = 0U;
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ if(hsai->ErrorCode != HAL_SAI_ERROR_WCKCFG)
+ {
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+ }
+ /* Set the SAI state to ready to be able to start again the process */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Initialize XferCount */
+ hsai->XferCount = 0U;
+
+ /* SAI error Callback */
+ HAL_SAI_ErrorCallback(hsai);
+}
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_SAI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,875 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SAI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_H
+#define __STM32F4xx_HAL_SAI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @addtogroup SAI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SAI_Exported_Types SAI Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SAI_STATE_RESET = 0x00U, /*!< SAI not yet initialized or disabled */
+ HAL_SAI_STATE_READY = 0x01U, /*!< SAI initialized and ready for use */
+ HAL_SAI_STATE_BUSY = 0x02U, /*!< SAI internal process is ongoing */
+ HAL_SAI_STATE_BUSY_TX = 0x12U, /*!< Data transmission process is ongoing */
+ HAL_SAI_STATE_BUSY_RX = 0x22U, /*!< Data reception process is ongoing */
+ HAL_SAI_STATE_TIMEOUT = 0x03U, /*!< SAI timeout state */
+ HAL_SAI_STATE_ERROR = 0x04U /*!< SAI error state */
+}HAL_SAI_StateTypeDef;
+
+/**
+ * @brief SAI Callback prototype
+ */
+typedef void (*SAIcallback)(void);
+
+/** @defgroup SAI_Init_Structure_definition SAI Init Structure definition
+ * @brief SAI Init Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t AudioMode; /*!< Specifies the SAI Block audio Mode.
+ This parameter can be a value of @ref SAI_Block_Mode */
+
+ uint32_t Synchro; /*!< Specifies SAI Block synchronization
+ This parameter can be a value of @ref SAI_Block_Synchronization */
+
+ uint32_t SynchroExt; /*!< Specifies SAI external output synchronization, this setup is common
+ for BlockA and BlockB
+ This parameter can be a value of @ref SAI_Block_SyncExt
+ @note: If both audio blocks of same SAI are used, this parameter has
+ to be set to the same value for each audio block */
+
+ uint32_t OutputDrive; /*!< Specifies when SAI Block outputs are driven.
+ This parameter can be a value of @ref SAI_Block_Output_Drive
+ @note this value has to be set before enabling the audio block
+ but after the audio block configuration. */
+
+ uint32_t NoDivider; /*!< Specifies whether master clock will be divided or not.
+ This parameter can be a value of @ref SAI_Block_NoDivider
+ @note If bit NODIV in the SAI_xCR1 register is cleared, the frame length
+ should be aligned to a number equal to a power of 2, from 8 to 256.
+ If bit NODIV in the SAI_xCR1 register is set, the frame length can
+ take any of the values without constraint since the input clock of
+ the audio block should be equal to the bit clock.
+ There is no MCLK_x clock which can be output. */
+
+ uint32_t FIFOThreshold; /*!< Specifies SAI Block FIFO threshold.
+ This parameter can be a value of @ref SAI_Block_Fifo_Threshold */
+
+ uint32_t ClockSource; /*!< Specifies the SAI Block x Clock source.
+ This parameter is not used for STM32F446xx devices. */
+
+ uint32_t AudioFrequency; /*!< Specifies the audio frequency sampling.
+ This parameter can be a value of @ref SAI_Audio_Frequency */
+
+ uint32_t Mckdiv; /*!< Specifies the master clock divider, the parameter will be used if for
+ AudioFrequency the user choice
+ This parameter must be a number between Min_Data = 0 and Max_Data = 15 */
+
+ uint32_t MonoStereoMode; /*!< Specifies if the mono or stereo mode is selected.
+ This parameter can be a value of @ref SAI_Mono_Stereo_Mode */
+
+ uint32_t CompandingMode; /*!< Specifies the companding mode type.
+ This parameter can be a value of @ref SAI_Block_Companding_Mode */
+
+ uint32_t TriState; /*!< Specifies the companding mode type.
+ This parameter can be a value of @ref SAI_TRIState_Management */
+
+ /* This part of the structure is automatically filled if your are using the high level intialisation
+ function HAL_SAI_InitProtocol */
+
+ uint32_t Protocol; /*!< Specifies the SAI Block protocol.
+ This parameter can be a value of @ref SAI_Block_Protocol */
+
+ uint32_t DataSize; /*!< Specifies the SAI Block data size.
+ This parameter can be a value of @ref SAI_Block_Data_Size */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission */
+
+ uint32_t ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity.
+ This parameter can be a value of @ref SAI_Block_Clock_Strobing */
+}SAI_InitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Frame_Structure_definition SAI Frame Structure definition
+ * @brief SAI Frame Init structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t FrameLength; /*!< Specifies the Frame length, the number of SCK clocks for each audio frame.
+ This parameter must be a number between Min_Data = 8 and Max_Data = 256.
+ @note If master clock MCLK_x pin is declared as an output, the frame length
+ should be aligned to a number equal to power of 2 in order to keep
+ in an audio frame, an integer number of MCLK pulses by bit Clock. */
+
+ uint32_t ActiveFrameLength; /*!< Specifies the Frame synchronization active level length.
+ This Parameter specifies the length in number of bit clock (SCK + 1)
+ of the active level of FS signal in audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 128 */
+
+ uint32_t FSDefinition; /*!< Specifies the Frame synchronization definition.
+ This parameter can be a value of @ref SAI_Block_FS_Definition */
+
+ uint32_t FSPolarity; /*!< Specifies the Frame synchronization Polarity.
+ This parameter can be a value of @ref SAI_Block_FS_Polarity */
+
+ uint32_t FSOffset; /*!< Specifies the Frame synchronization Offset.
+ This parameter can be a value of @ref SAI_Block_FS_Offset */
+}SAI_FrameInitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Slot_Structure_definition SAI Slot Structure definition
+ * @brief SAI Block Slot Init Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 24 */
+
+ uint32_t SlotSize; /*!< Specifies the Slot Size.
+ This parameter can be a value of @ref SAI_Block_Slot_Size */
+
+ uint32_t SlotNumber; /*!< Specifies the number of slot in the audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SlotActive; /*!< Specifies the slots in audio frame that will be activated.
+ This parameter can be a value of @ref SAI_Block_Slot_Active */
+}SAI_SlotInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Handle_Structure_definition SAI Handle Structure definition
+ * @brief SAI handle Structure definition
+ * @{
+ */
+typedef struct __SAI_HandleTypeDef
+{
+ SAI_Block_TypeDef *Instance; /*!< SAI Blockx registers base address */
+
+ SAI_InitTypeDef Init; /*!< SAI communication parameters */
+
+ SAI_FrameInitTypeDef FrameInit; /*!< SAI Frame configuration parameters */
+
+ SAI_SlotInitTypeDef SlotInit; /*!< SAI Slot configuration parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to SAI transfer Buffer */
+
+ uint16_t XferSize; /*!< SAI transfer size */
+
+ uint16_t XferCount; /*!< SAI transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SAI Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SAI Rx DMA handle parameters */
+
+ SAIcallback mutecallback;/*!< SAI mute callback */
+
+ void (*InterruptServiceRoutine)(struct __SAI_HandleTypeDef *hsai); /* function pointer for IRQ handler */
+
+ HAL_LockTypeDef Lock; /*!< SAI locking object */
+
+ __IO HAL_SAI_StateTypeDef State; /*!< SAI communication state */
+
+ __IO uint32_t ErrorCode; /*!< SAI Error code */
+}SAI_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Constants SAI Exported Constants
+ * @{
+ */
+
+/** @defgroup SAI_Error_Code SAI Error Code
+ * @{
+ */
+#define HAL_SAI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SAI_ERROR_OVR ((uint32_t)0x00000001U) /*!< Overrun Error */
+#define HAL_SAI_ERROR_UDR ((uint32_t)0x00000002U) /*!< Underrun error */
+#define HAL_SAI_ERROR_AFSDET ((uint32_t)0x00000004U) /*!< Anticipated Frame synchronisation detection */
+#define HAL_SAI_ERROR_LFSDET ((uint32_t)0x00000008U) /*!< Late Frame synchronisation detection */
+#define HAL_SAI_ERROR_CNREADY ((uint32_t)0x00000010U) /*!< codec not ready */
+#define HAL_SAI_ERROR_WCKCFG ((uint32_t)0x00000020U) /*!< Wrong clock configuration */
+#define HAL_SAI_ERROR_TIMEOUT ((uint32_t)0x00000040U) /*!< Timeout error */
+#define HAL_SAI_ERROR_DMA ((uint32_t)0x00000080U) /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_SyncExt SAI External synchronisation
+ * @{
+ */
+#define SAI_SYNCEXT_DISABLE 0U
+#define SAI_SYNCEXT_OUTBLOCKA_ENABLE 1U
+#define SAI_SYNCEXT_OUTBLOCKB_ENABLE 2U
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Protocol SAI Supported protocol
+ * @{
+ */
+#define SAI_I2S_STANDARD 0U
+#define SAI_I2S_MSBJUSTIFIED 1U
+#define SAI_I2S_LSBJUSTIFIED 2U
+#define SAI_PCM_LONG 3U
+#define SAI_PCM_SHORT 4U
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Protocol_DataSize SAI protocol data size
+ * @{
+ */
+#define SAI_PROTOCOL_DATASIZE_16BIT 0U
+#define SAI_PROTOCOL_DATASIZE_16BITEXTENDED 1U
+#define SAI_PROTOCOL_DATASIZE_24BIT 2U
+#define SAI_PROTOCOL_DATASIZE_32BIT 3U
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Clock_Source SAI Clock Source
+ * @{
+ */
+#define SAI_CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define SAI_CLKSOURCE_PLLI2S ((uint32_t)0x00100000U)
+#define SAI_CLKSOURCE_EXT ((uint32_t)0x00200000U)
+#define SAI_CLKSOURCE_NA ((uint32_t)0x00400000U) /*!< No applicable for STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Audio_Frequency SAI Audio Frequency
+ * @{
+ */
+#define SAI_AUDIO_FREQUENCY_192K ((uint32_t)192000U)
+#define SAI_AUDIO_FREQUENCY_96K ((uint32_t)96000U)
+#define SAI_AUDIO_FREQUENCY_48K ((uint32_t)48000U)
+#define SAI_AUDIO_FREQUENCY_44K ((uint32_t)44100U)
+#define SAI_AUDIO_FREQUENCY_32K ((uint32_t)32000U)
+#define SAI_AUDIO_FREQUENCY_22K ((uint32_t)22050U)
+#define SAI_AUDIO_FREQUENCY_16K ((uint32_t)16000U)
+#define SAI_AUDIO_FREQUENCY_11K ((uint32_t)11025U)
+#define SAI_AUDIO_FREQUENCY_8K ((uint32_t)8000U)
+#define SAI_AUDIO_FREQUENCY_MCKDIV ((uint32_t)0U)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mode SAI Block Mode
+ * @{
+ */
+#define SAI_MODEMASTER_TX ((uint32_t)0x00000000U)
+#define SAI_MODEMASTER_RX ((uint32_t)SAI_xCR1_MODE_0)
+#define SAI_MODESLAVE_TX ((uint32_t)SAI_xCR1_MODE_1)
+#define SAI_MODESLAVE_RX ((uint32_t)(SAI_xCR1_MODE_1 | SAI_xCR1_MODE_0))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Protocol SAI Block Protocol
+ * @{
+ */
+#define SAI_FREE_PROTOCOL ((uint32_t)0x00000000U)
+#define SAI_SPDIF_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_0)
+#define SAI_AC97_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_1)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Data_Size SAI Block Data Size
+ * @{
+ */
+#define SAI_DATASIZE_8 ((uint32_t)SAI_xCR1_DS_1)
+#define SAI_DATASIZE_10 ((uint32_t)(SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_16 ((uint32_t)SAI_xCR1_DS_2)
+#define SAI_DATASIZE_20 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_24 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1))
+#define SAI_DATASIZE_32 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_MSB_LSB_transmission SAI Block MSB LSB transmission
+ * @{
+ */
+#define SAI_FIRSTBIT_MSB ((uint32_t)0x00000000U)
+#define SAI_FIRSTBIT_LSB ((uint32_t)SAI_xCR1_LSBFIRST)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Clock_Strobing SAI Block Clock Strobing
+ * @{
+ */
+#define SAI_CLOCKSTROBING_FALLINGEDGE 0U
+#define SAI_CLOCKSTROBING_RISINGEDGE 1U
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Synchronization SAI Block Synchronization
+ * @{
+ */
+#define SAI_ASYNCHRONOUS 0U /*!< Asynchronous */
+#define SAI_SYNCHRONOUS 1U /*!< Synchronous with other block of same SAI */
+#define SAI_SYNCHRONOUS_EXT_SAI1 2U /*!< Synchronous with other SAI, SAI1 */
+#define SAI_SYNCHRONOUS_EXT_SAI2 3U /*!< Synchronous with other SAI, SAI2 */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Output_Drive SAI Block Output Drive
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLE ((uint32_t)0x00000000U)
+#define SAI_OUTPUTDRIVE_ENABLE ((uint32_t)SAI_xCR1_OUTDRIV)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_NoDivider SAI Block NoDivider
+ * @{
+ */
+#define SAI_MASTERDIVIDER_ENABLE ((uint32_t)0x00000000U)
+#define SAI_MASTERDIVIDER_DISABLE ((uint32_t)SAI_xCR1_NODIV)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Definition SAI Block FS Definition
+ * @{
+ */
+#define SAI_FS_STARTFRAME ((uint32_t)0x00000000U)
+#define SAI_FS_CHANNEL_IDENTIFICATION ((uint32_t)SAI_xFRCR_FSDEF)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Polarity SAI Block FS Polarity
+ * @{
+ */
+#define SAI_FS_ACTIVE_LOW ((uint32_t)0x00000000U)
+#define SAI_FS_ACTIVE_HIGH ((uint32_t)SAI_xFRCR_FSPOL)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Offset SAI Block FS Offset
+ * @{
+ */
+#define SAI_FS_FIRSTBIT ((uint32_t)0x00000000U)
+#define SAI_FS_BEFOREFIRSTBIT ((uint32_t)SAI_xFRCR_FSOFF)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_Size SAI Block Slot Size
+ * @{
+ */
+#define SAI_SLOTSIZE_DATASIZE ((uint32_t)0x00000000U)
+#define SAI_SLOTSIZE_16B ((uint32_t)SAI_xSLOTR_SLOTSZ_0)
+#define SAI_SLOTSIZE_32B ((uint32_t)SAI_xSLOTR_SLOTSZ_1)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_Active SAI Block Slot Active
+ * @{
+ */
+#define SAI_SLOT_NOTACTIVE ((uint32_t)0x00000000U)
+#define SAI_SLOTACTIVE_0 ((uint32_t)0x00000001U)
+#define SAI_SLOTACTIVE_1 ((uint32_t)0x00000002U)
+#define SAI_SLOTACTIVE_2 ((uint32_t)0x00000004U)
+#define SAI_SLOTACTIVE_3 ((uint32_t)0x00000008U)
+#define SAI_SLOTACTIVE_4 ((uint32_t)0x00000010U)
+#define SAI_SLOTACTIVE_5 ((uint32_t)0x00000020U)
+#define SAI_SLOTACTIVE_6 ((uint32_t)0x00000040U)
+#define SAI_SLOTACTIVE_7 ((uint32_t)0x00000080U)
+#define SAI_SLOTACTIVE_8 ((uint32_t)0x00000100U)
+#define SAI_SLOTACTIVE_9 ((uint32_t)0x00000200U)
+#define SAI_SLOTACTIVE_10 ((uint32_t)0x00000400U)
+#define SAI_SLOTACTIVE_11 ((uint32_t)0x00000800U)
+#define SAI_SLOTACTIVE_12 ((uint32_t)0x00001000U)
+#define SAI_SLOTACTIVE_13 ((uint32_t)0x00002000U)
+#define SAI_SLOTACTIVE_14 ((uint32_t)0x00004000U)
+#define SAI_SLOTACTIVE_15 ((uint32_t)0x00008000U)
+#define SAI_SLOTACTIVE_ALL ((uint32_t)0x0000FFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Mono_Stereo_Mode SAI Mono Stereo Mode
+ * @{
+ */
+#define SAI_STEREOMODE ((uint32_t)0x00000000U)
+#define SAI_MONOMODE ((uint32_t)SAI_xCR1_MONO)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_TRIState_Management SAI TRIState Management
+ * @{
+ */
+#define SAI_OUTPUT_NOTRELEASED ((uint32_t)0x00000000U)
+#define SAI_OUTPUT_RELEASED ((uint32_t)SAI_xCR2_TRIS)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Threshold SAI Block Fifo Threshold
+ * @{
+ */
+#define SAI_FIFOTHRESHOLD_EMPTY ((uint32_t)0x00000000U)
+#define SAI_FIFOTHRESHOLD_1QF ((uint32_t)(SAI_xCR2_FTH_0))
+#define SAI_FIFOTHRESHOLD_HF ((uint32_t)(SAI_xCR2_FTH_1))
+#define SAI_FIFOTHRESHOLD_3QF ((uint32_t)(SAI_xCR2_FTH_1 | SAI_xCR2_FTH_0))
+#define SAI_FIFOTHRESHOLD_FULL ((uint32_t)(SAI_xCR2_FTH_2))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Companding_Mode SAI Block Companding Mode
+ * @{
+ */
+#define SAI_NOCOMPANDING ((uint32_t)0x00000000U)
+#define SAI_ULAW_1CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1))
+#define SAI_ALAW_1CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0))
+#define SAI_ULAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_CPL))
+#define SAI_ALAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0 | SAI_xCR2_CPL))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mute_Value SAI Block Mute Value
+ * @{
+ */
+#define SAI_ZERO_VALUE ((uint32_t)0x00000000U)
+#define SAI_LAST_SENT_VALUE ((uint32_t)SAI_xCR2_MUTEVAL)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Interrupts_Definition SAI Block Interrupts Definition
+ * @{
+ */
+#define SAI_IT_OVRUDR ((uint32_t)SAI_xIMR_OVRUDRIE)
+#define SAI_IT_MUTEDET ((uint32_t)SAI_xIMR_MUTEDETIE)
+#define SAI_IT_WCKCFG ((uint32_t)SAI_xIMR_WCKCFGIE)
+#define SAI_IT_FREQ ((uint32_t)SAI_xIMR_FREQIE)
+#define SAI_IT_CNRDY ((uint32_t)SAI_xIMR_CNRDYIE)
+#define SAI_IT_AFSDET ((uint32_t)SAI_xIMR_AFSDETIE)
+#define SAI_IT_LFSDET ((uint32_t)SAI_xIMR_LFSDETIE)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Flags_Definition SAI Block Flags Definition
+ * @{
+ */
+#define SAI_FLAG_OVRUDR ((uint32_t)SAI_xSR_OVRUDR)
+#define SAI_FLAG_MUTEDET ((uint32_t)SAI_xSR_MUTEDET)
+#define SAI_FLAG_WCKCFG ((uint32_t)SAI_xSR_WCKCFG)
+#define SAI_FLAG_FREQ ((uint32_t)SAI_xSR_FREQ)
+#define SAI_FLAG_CNRDY ((uint32_t)SAI_xSR_CNRDY)
+#define SAI_FLAG_AFSDET ((uint32_t)SAI_xSR_AFSDET)
+#define SAI_FLAG_LFSDET ((uint32_t)SAI_xSR_LFSDET)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Status_Level SAI Block Fifo Status Level
+ * @{
+ */
+#define SAI_FIFOSTATUS_EMPTY ((uint32_t)0x00000000U)
+#define SAI_FIFOSTATUS_LESS1QUARTERFULL ((uint32_t)0x00010000U)
+#define SAI_FIFOSTATUS_1QUARTERFULL ((uint32_t)0x00020000U)
+#define SAI_FIFOSTATUS_HALFFULL ((uint32_t)0x00030000U)
+#define SAI_FIFOSTATUS_3QUARTERFULL ((uint32_t)0x00040000U)
+#define SAI_FIFOSTATUS_FULL ((uint32_t)0x00050000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Macros SAI Exported Macros
+ * @brief macros to handle interrupts and specific configurations
+ * @{
+ */
+
+/** @brief Reset SAI handle state
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @retval NoneS
+ */
+#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET)
+
+/** @brief Enable or disable the specified SAI interrupts.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable
+ * @arg SAI_IT_MUTEDET: Mute detection interrupt enable
+ * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable
+ * @arg SAI_IT_FREQ: FIFO request interrupt enable
+ * @arg SAI_IT_CNRDY: Codec not ready interrupt enable
+ * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable
+ * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable
+ * @retval None
+ */
+#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__)))
+
+/** @brief Check if the specified SAI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * This parameter can be SAI where x: 1, 2, or 3 to select the SAI peripheral.
+ * @param __INTERRUPT__: specifies the SAI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable
+ * @arg SAI_IT_MUTEDET: Mute detection interrupt enable
+ * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable
+ * @arg SAI_IT_FREQ: FIFO request interrupt enable
+ * @arg SAI_IT_CNRDY: Codec not ready interrupt enable
+ * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable
+ * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SAI flag is set or not.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_FLAG_OVRUDR: Overrun underrun flag.
+ * @arg SAI_FLAG_MUTEDET: Mute detection flag.
+ * @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag.
+ * @arg SAI_FLAG_FREQ: FIFO request flag.
+ * @arg SAI_FLAG_CNRDY: Codec not ready flag.
+ * @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag.
+ * @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the specified SAI pending flag.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SAI_FLAG_OVRUDR: Clear Overrun underrun
+ * @arg SAI_FLAG_MUTEDET: Clear Mute detection
+ * @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration
+ * @arg SAI_FLAG_FREQ: Clear FIFO request
+ * @arg SAI_FLAG_CNRDY: Clear Codec not ready
+ * @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection
+ * @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection
+ * @retval None
+ */
+#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__))
+
+/** @brief Enable SAI
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @retval None
+ */
+#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SAI_xCR1_SAIEN)
+
+/** @brief Disable SAI
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @retval None
+ */
+#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SAI_xCR1_SAIEN)
+
+ /**
+ * @}
+ */
+
+/* Include RCC SAI Extension module */
+#include "stm32f4xx_hal_sai_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SAI_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+/** @addtogroup SAI_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DeInit (SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai);
+
+/**
+ * @}
+ */
+
+/* I/O operation functions *****************************************************/
+/** @addtogroup SAI_Exported_Functions_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai);
+
+/* Abort function */
+HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai);
+
+/* Mute management */
+HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val);
+HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter);
+HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai);
+
+/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai);
+/**
+ * @}
+ */
+
+/** @addtogroup SAI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai);
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup SAI_Private_Macros
+ * @{
+ */
+#define IS_SAI_BLOCK_SYNCEXT(STATE) (((STATE) == SAI_SYNCEXT_DISABLE) ||\
+ ((STATE) == SAI_SYNCEXT_OUTBLOCKA_ENABLE) ||\
+ ((STATE) == SAI_SYNCEXT_OUTBLOCKB_ENABLE))
+
+#define IS_SAI_SUPPORTED_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_I2S_STANDARD) ||\
+ ((PROTOCOL) == SAI_I2S_MSBJUSTIFIED) ||\
+ ((PROTOCOL) == SAI_I2S_LSBJUSTIFIED) ||\
+ ((PROTOCOL) == SAI_PCM_LONG) ||\
+ ((PROTOCOL) == SAI_PCM_SHORT))
+
+#define IS_SAI_PROTOCOL_DATASIZE(DATASIZE) (((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BIT) ||\
+ ((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) ||\
+ ((DATASIZE) == SAI_PROTOCOL_DATASIZE_24BIT) ||\
+ ((DATASIZE) == SAI_PROTOCOL_DATASIZE_32BIT))
+
+#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == SAI_CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == SAI_CLKSOURCE_EXT))
+
+#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_48K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_32K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_16K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_8K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_MCKDIV))
+
+#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_MODEMASTER_TX) || \
+ ((MODE) == SAI_MODEMASTER_RX) || \
+ ((MODE) == SAI_MODESLAVE_TX) || \
+ ((MODE) == SAI_MODESLAVE_RX))
+
+#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL) || \
+ ((PROTOCOL) == SAI_AC97_PROTOCOL) || \
+ ((PROTOCOL) == SAI_SPDIF_PROTOCOL))
+
+#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8) || \
+ ((DATASIZE) == SAI_DATASIZE_10) || \
+ ((DATASIZE) == SAI_DATASIZE_16) || \
+ ((DATASIZE) == SAI_DATASIZE_20) || \
+ ((DATASIZE) == SAI_DATASIZE_24) || \
+ ((DATASIZE) == SAI_DATASIZE_32))
+
+#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \
+ ((BIT) == SAI_FIRSTBIT_LSB))
+
+#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \
+ ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE))
+
+#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \
+ ((SYNCHRO) == SAI_SYNCHRONOUS) || \
+ ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI1) ||\
+ ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI2))
+
+#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLE) || \
+ ((DRIVE) == SAI_OUTPUTDRIVE_ENABLE))
+
+#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLE) || \
+ ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLE))
+
+#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63U)
+
+#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZERO_VALUE) || \
+ ((VALUE) == SAI_LAST_SENT_VALUE))
+
+#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NOCOMPANDING) || \
+ ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_2CPL_COMPANDING))
+
+#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL))
+
+#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\
+ ((STATE) == SAI_OUTPUT_RELEASED))
+
+#define IS_SAI_MONO_STEREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\
+ ((MODE) == SAI_STEREOMODE))
+
+#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((ACTIVE) <= SAI_SLOTACTIVE_ALL)
+
+#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1U <= (NUMBER)) && ((NUMBER) <= 16U))
+
+#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \
+ ((SIZE) == SAI_SLOTSIZE_16B) || \
+ ((SIZE) == SAI_SLOTSIZE_32B))
+
+#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24U)
+
+#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \
+ ((OFFSET) == SAI_FS_BEFOREFIRSTBIT))
+
+#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \
+ ((POLARITY) == SAI_FS_ACTIVE_HIGH))
+
+#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \
+ ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION))
+
+#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15U)
+
+#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8U <= (LENGTH)) && ((LENGTH) <= 256U))
+
+#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1U <= (LENGTH)) && ((LENGTH) <= 128U))
+
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Functions SAI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,278 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SAI Extension HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of SAI extension peripheral:
+ * + Extension features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SAI peripheral extension features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the SAI interface for STM32F446xx
+ devices contains the following additional features :
+
+ (+) Possibility to be clocked from PLLR
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to manage several sources to clock SAI
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SAIEx SAIEx
+ * @brief SAI Extension HAL module driver
+ * @{
+ */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* SAI registers Masks */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SAI_Private_Functions SAI Private Functions
+ * @{
+ */
+ /**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SAIEx_Exported_Functions SAI Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup SAIEx_Exported_Functions_Group1 Extension features functions
+ * @brief Extension features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension features Functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the possible
+ SAI clock sources.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure SAI Block synchronization mode
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval SAI Clock Input
+ */
+void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai)
+{
+ uint32_t tmpregisterGCR = 0U;
+
+#if defined(STM32F446xx)
+ /* This setting must be done with both audio block (A & B) disabled */
+ switch(hsai->Init.SynchroExt)
+ {
+ case SAI_SYNCEXT_DISABLE :
+ tmpregisterGCR = 0U;
+ break;
+ case SAI_SYNCEXT_OUTBLOCKA_ENABLE :
+ tmpregisterGCR = SAI_GCR_SYNCOUT_0;
+ break;
+ case SAI_SYNCEXT_OUTBLOCKB_ENABLE :
+ tmpregisterGCR = SAI_GCR_SYNCOUT_1;
+ break;
+ default:
+ break;
+ }
+
+ if((hsai->Init.Synchro) == SAI_SYNCHRONOUS_EXT_SAI2)
+ {
+ tmpregisterGCR |= SAI_GCR_SYNCIN_0;
+ }
+
+ if((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
+ {
+ SAI1->GCR = tmpregisterGCR;
+ }
+ else
+ {
+ SAI2->GCR = tmpregisterGCR;
+ }
+#endif /* STM32F446xx */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx)
+ /* This setting must be done with both audio block (A & B) disabled */
+ switch(hsai->Init.SynchroExt)
+ {
+ case SAI_SYNCEXT_DISABLE :
+ tmpregisterGCR = 0U;
+ break;
+ case SAI_SYNCEXT_OUTBLOCKA_ENABLE :
+ tmpregisterGCR = SAI_GCR_SYNCOUT_0;
+ break;
+ case SAI_SYNCEXT_OUTBLOCKB_ENABLE :
+ tmpregisterGCR = SAI_GCR_SYNCOUT_1;
+ break;
+ default:
+ break;
+ }
+ SAI1->GCR = tmpregisterGCR;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+}
+ /**
+ * @brief Get SAI Input Clock based on SAI source clock selection
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval SAI Clock Input
+ */
+uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai)
+{
+ /* This variable used to store the SAI_CK_x (value in Hz) */
+ uint32_t saiclocksource = 0U;
+
+#if defined(STM32F446xx)
+ if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
+ {
+ saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1);
+ }
+ else /* SAI2_Block_A || SAI2_Block_B*/
+ {
+ saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2);
+ }
+#endif /* STM32F446xx */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx)
+ uint32_t vcoinput = 0U, tmpreg = 0U;
+
+ /* Check the SAI Block parameters */
+ assert_param(IS_SAI_CLK_SOURCE(hsai->Init.ClockSource));
+
+ /* SAI Block clock source selection */
+ if(hsai->Instance == SAI1_Block_A)
+ {
+ __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(hsai->Init.ClockSource);
+ }
+ else
+ {
+ __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG((uint32_t)(hsai->Init.ClockSource << 2U));
+ }
+
+ /* VCO Input Clock value calculation */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+
+ /* SAI_CLK_x : SAI Block Clock configuration for different clock sources selected */
+ if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLSAI)
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U;
+ saiclocksource = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ tmpreg = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U);
+ saiclocksource = saiclocksource/(tmpreg);
+
+ }
+ else if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLI2S)
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U;
+ saiclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ tmpreg = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U);
+ saiclocksource = saiclocksource/(tmpreg);
+ }
+ else /* sConfig->ClockSource == SAI_CLKSource_Ext */
+ {
+ /* Enable the External Clock selection */
+ __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT);
+
+ saiclocksource = EXTERNAL_CLOCK_VALUE;
+ }
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+ /* the return result is the value of SAI clock */
+ return saiclocksource;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_SAI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,102 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SAI Extension HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_EX_H
+#define __STM32F4xx_HAL_SAI_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SAIEx
+ * @{
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SAIEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SAIEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Extended features functions ************************************************/
+void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai);
+uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,3510 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sd.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SD card HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Secure Digital (SD) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver implements a high level communication layer for read and write from/to
+ this memory. The needed STM32 hardware resources (SDIO and GPIO) are performed by
+ the user in HAL_SD_MspInit() function (MSP layer).
+ Basically, the MSP layer configuration should be the same as we provide in the
+ examples.
+ You can easily tailor this configuration according to hardware resources.
+
+ [..]
+ This driver is a generic layered driver for SDIO memories which uses the HAL
+ SDIO driver functions to interface with SD and uSD cards devices.
+ It is used as follows:
+
+ (#)Initialize the SDIO low level resources by implement the HAL_SD_MspInit() API:
+ (##) Enable the SDIO interface clock using __HAL_RCC_SDIO_CLK_ENABLE();
+ (##) SDIO pins configuration for SD card
+ (+++) Enable the clock for the SDIO GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these SDIO pins as alternate function pull-up using HAL_GPIO_Init()
+ and according to your pin assignment;
+ (##) DMA Configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA()
+ and HAL_SD_WriteBlocks_DMA() APIs).
+ (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
+ (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
+ (##) NVIC configuration if you need to use interrupt process when using DMA transfer.
+ (+++) Configure the SDIO and DMA interrupt priorities using functions
+ HAL_NVIC_SetPriority(); DMA priority is superior to SDIO's priority
+ (+++) Enable the NVIC DMA and SDIO IRQs using function HAL_NVIC_EnableIRQ()
+ (+++) SDIO interrupts are managed using the macros __HAL_SD_SDIO_ENABLE_IT()
+ and __HAL_SD_SDIO_DISABLE_IT() inside the communication process.
+ (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_SDIO_GET_IT()
+ and __HAL_SD_SDIO_CLEAR_IT()
+ (#) At this stage, you can perform SD read/write/erase operations after SD card initialization
+
+
+ *** SD Card Initialization and configuration ***
+ ================================================
+ [..]
+ To initialize the SD Card, use the HAL_SD_Init() function. It Initializes
+ the SD Card and put it into Standby State (Ready for data transfer).
+ This function provide the following operations:
+
+ (#) Apply the SD Card initialization process at 400KHz and check the SD Card
+ type (Standard Capacity or High Capacity). You can change or adapt this
+ frequency by adjusting the "ClockDiv" field.
+ The SD Card frequency (SDIO_CK) is computed as follows:
+
+ SDIO_CK = SDIOCLK / (ClockDiv + 2)
+
+ In initialization mode and according to the SD Card standard,
+ make sure that the SDIO_CK frequency doesn't exceed 400KHz.
+
+ (#) Get the SD CID and CSD data. All these information are managed by the SDCardInfo
+ structure. This structure provide also ready computed SD Card capacity
+ and Block size.
+
+ -@- These information are stored in SD handle structure in case of future use.
+
+ (#) Configure the SD Card Data transfer frequency. By Default, the card transfer
+ frequency is set to 24MHz. You can change or adapt this frequency by adjusting
+ the "ClockDiv" field.
+ In transfer mode and according to the SD Card standard, make sure that the
+ SDIO_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch.
+ To be able to use a frequency higher than 24MHz, you should use the SDIO
+ peripheral in bypass mode. Refer to the corresponding reference manual
+ for more details.
+
+ (#) Select the corresponding SD Card according to the address read with the step 2.
+
+ (#) Configure the SD Card in wide bus mode: 4-bits data.
+
+ *** SD Card Read operation ***
+ ==============================
+ [..]
+ (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+
+ (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to call the function HAL_SD_CheckReadOperation(), to insure
+ that the read transfer is done correctly in both DMA and SD sides.
+
+ *** SD Card Write operation ***
+ ===============================
+ [..]
+ (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+
+ (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 byte).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to call the function HAL_SD_CheckWriteOperation(), to insure
+ that the write transfer is done correctly in both DMA and SD sides.
+
+ *** SD card status ***
+ ======================
+ [..]
+ (+) At any time, you can check the SD Card status and get the SD card state
+ by using the HAL_SD_GetStatus() function. This function checks first if the
+ SD card is still connected and then get the internal SD Card transfer state.
+ (+) You can also get the SD card SD Status register by using the HAL_SD_SendSDStatus()
+ function.
+
+ *** SD HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in SD HAL driver.
+
+ (+) __HAL_SD_SDIO_ENABLE : Enable the SD device
+ (+) __HAL_SD_SDIO_DISABLE : Disable the SD device
+ (+) __HAL_SD_SDIO_DMA_ENABLE: Enable the SDIO DMA transfer
+ (+) __HAL_SD_SDIO_DMA_DISABLE: Disable the SDIO DMA transfer
+ (+) __HAL_SD_SDIO_ENABLE_IT: Enable the SD device interrupt
+ (+) __HAL_SD_SDIO_DISABLE_IT: Disable the SD device interrupt
+ (+) __HAL_SD_SDIO_GET_FLAG:Check whether the specified SD flag is set or not
+ (+) __HAL_SD_SDIO_CLEAR_FLAG: Clear the SD's pending flags
+
+ (@) You can refer to the SD HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+#ifdef HAL_SD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SD
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup SD_Private_Defines
+ * @{
+ */
+/**
+ * @brief SDIO Data block size
+ */
+#define DATA_BLOCK_SIZE ((uint32_t)(9U << 4U))
+/**
+ * @brief SDIO Static flags, Timeout, FIFO Address
+ */
+#define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\
+ SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\
+ SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\
+ SDIO_FLAG_DBCKEND))
+
+#define SDIO_CMD0TIMEOUT ((uint32_t)0x00010000U)
+
+/**
+ * @brief Mask for errors Card Status R1 (OCR Register)
+ */
+#define SD_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000U)
+#define SD_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000U)
+#define SD_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000U)
+#define SD_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000U)
+#define SD_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000U)
+#define SD_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000U)
+#define SD_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000U)
+#define SD_OCR_COM_CRC_FAILED ((uint32_t)0x00800000U)
+#define SD_OCR_ILLEGAL_CMD ((uint32_t)0x00400000U)
+#define SD_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000U)
+#define SD_OCR_CC_ERROR ((uint32_t)0x00100000U)
+#define SD_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000U)
+#define SD_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000U)
+#define SD_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000U)
+#define SD_OCR_CID_CSD_OVERWRITE ((uint32_t)0x00010000U)
+#define SD_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000U)
+#define SD_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000U)
+#define SD_OCR_ERASE_RESET ((uint32_t)0x00002000U)
+#define SD_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008U)
+#define SD_OCR_ERRORBITS ((uint32_t)0xFDFFE008U)
+
+/**
+ * @brief Masks for R6 Response
+ */
+#define SD_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000U)
+#define SD_R6_ILLEGAL_CMD ((uint32_t)0x00004000U)
+#define SD_R6_COM_CRC_FAILED ((uint32_t)0x00008000U)
+
+#define SD_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000U)
+#define SD_HIGH_CAPACITY ((uint32_t)0x40000000U)
+#define SD_STD_CAPACITY ((uint32_t)0x00000000U)
+#define SD_CHECK_PATTERN ((uint32_t)0x000001AAU)
+
+#define SD_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFFU)
+#define SD_ALLZERO ((uint32_t)0x00000000U)
+
+#define SD_WIDE_BUS_SUPPORT ((uint32_t)0x00040000U)
+#define SD_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000U)
+#define SD_CARD_LOCKED ((uint32_t)0x02000000U)
+
+#define SD_DATATIMEOUT ((uint32_t)0xFFFFFFFFU)
+#define SD_0TO7BITS ((uint32_t)0x000000FFU)
+#define SD_8TO15BITS ((uint32_t)0x0000FF00U)
+#define SD_16TO23BITS ((uint32_t)0x00FF0000U)
+#define SD_24TO31BITS ((uint32_t)0xFF000000U)
+#define SD_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFFU)
+
+#define SD_HALFFIFO ((uint32_t)0x00000008U)
+#define SD_HALFFIFOBYTES ((uint32_t)0x00000020U)
+
+/**
+ * @brief Command Class Supported
+ */
+#define SD_CCCC_LOCK_UNLOCK ((uint32_t)0x00000080U)
+#define SD_CCCC_WRITE_PROT ((uint32_t)0x00000040U)
+#define SD_CCCC_ERASE ((uint32_t)0x00000020U)
+
+/**
+ * @brief Following commands are SD Card Specific commands.
+ * SDIO_APP_CMD should be sent before sending these commands.
+ */
+#define SD_SDIO_SEND_IF_COND ((uint32_t)SD_CMD_HS_SEND_EXT_CSD)
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SD_Private_Functions_Prototypes
+ * @{
+ */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr);
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus);
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus);
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD);
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA);
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR);
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SD_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize the SD
+ card device to be ready for use.
+
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SD card according to the specified parameters in the
+ SD_HandleTypeDef and create the associated handle.
+ * @param hsd: SD handle
+ * @param SDCardInfo: HAL_SD_CardInfoTypedef structure for SD card information
+ * @retval HAL SD error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo)
+{
+ __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SD_InitTypeDef tmpinit;
+
+ /* Allocate lock resource and initialize it */
+ hsd->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_SD_MspInit(hsd);
+
+ /* Default SDIO peripheral configuration for SD card initialization */
+ tmpinit.ClockEdge = SDIO_CLOCK_EDGE_RISING;
+ tmpinit.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
+ tmpinit.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
+ tmpinit.BusWide = SDIO_BUS_WIDE_1B;
+ tmpinit.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
+ tmpinit.ClockDiv = SDIO_INIT_CLK_DIV;
+
+ /* Initialize SDIO peripheral interface with default configuration */
+ SDIO_Init(hsd->Instance, tmpinit);
+
+ /* Identify card operating voltage */
+ errorstate = SD_PowerON(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Initialize the present SDIO card(s) and put them in idle state */
+ errorstate = SD_Initialize_Cards(hsd);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Read CSD/CID MSD registers */
+ errorstate = HAL_SD_Get_CardInfo(hsd, SDCardInfo);
+
+ if (errorstate == SD_OK)
+ {
+ /* Select the Card */
+ errorstate = SD_Select_Deselect(hsd, (uint32_t)(((uint32_t)SDCardInfo->RCA) << 16U));
+ }
+
+ /* Configure SDIO peripheral interface */
+ SDIO_Init(hsd->Instance, hsd->Init);
+
+ return errorstate;
+}
+
+/**
+ * @brief De-Initializes the SD card.
+ * @param hsd: SD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd)
+{
+
+ /* Set SD power state to off */
+ SD_PowerOFF(hsd);
+
+ /* De-Initialize the MSP layer */
+ HAL_SD_MspDeInit(hsd);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the SD MSP.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-Initialize SD MSP.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group2
+ * @brief Data transfer functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the data
+ transfer from/to SD card.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by polling mode.
+ * @param hsd: SD handle
+ * @param pReadBuffer: pointer to the buffer that will contain the received data
+ * @param ReadAddr: Address from where data is to be read
+ * @param BlockSize: SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of SD blocks to read
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t count = 0U, *tempbuff = (uint32_t *)pReadBuffer;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512U;
+ ReadAddr /= 512U;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t) BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize;
+ sdio_datainitstructure.DataBlockSize = DATA_BLOCK_SIZE;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ if(NumberOfBlocks > 1U)
+ {
+ /* Send CMD18 READ_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+ }
+ else
+ {
+ /* Send CMD17 READ_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Read block(s) in polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Poll on SDIO flags */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ /* Read data from SDIO Rx FIFO */
+ for (count = 0U; count < 8U; count++)
+ {
+ *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ tempbuff += 8U;
+ }
+ }
+ }
+ else
+ {
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* In case of single block transfer, no need of stop transfer at all */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ /* Read data from SDIO Rx FIFO */
+ for (count = 0U; count < 8U; count++)
+ {
+ *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ tempbuff += 8U;
+ }
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock read */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
+ {
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) ||\
+ (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send stop transmission command */
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+ }
+
+ /* Get error state */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ count = SD_DATATIMEOUT;
+
+ /* Empty FIFO if there is still any data */
+ while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0U))
+ {
+ *tempbuff = SDIO_ReadFIFO(hsd->Instance);
+ tempbuff++;
+ count--;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Allows to write block(s) to a specified address in a card. The Data
+ * transfer is managed by polling mode.
+ * @param hsd: SD handle
+ * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit
+ * @param WriteAddr: Address from where data is to be written
+ * @param BlockSize: SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of SD blocks to write
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t totalnumberofbytes = 0U, bytestransferred = 0U, count = 0U, restwords = 0U;
+ uint32_t *tempbuff = (uint32_t *)pWriteBuffer;
+ uint8_t cardstate = 0U;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512U;
+ WriteAddr /= 512U;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ if(NumberOfBlocks > 1U)
+ {
+ /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+ }
+ else
+ {
+ /* Send CMD24 WRITE_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ if(NumberOfBlocks > 1U)
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+ }
+ else
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+ }
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Set total number of bytes to write */
+ totalnumberofbytes = NumberOfBlocks * BlockSize;
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Write block(s) in polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
+ {
+ if ((totalnumberofbytes - bytestransferred) < 32U)
+ {
+ restwords = ((totalnumberofbytes - bytestransferred) % 4U == 0U) ? ((totalnumberofbytes - bytestransferred) / 4U) : (( totalnumberofbytes - bytestransferred) / 4U + 1U);
+
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0U; count < restwords; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, tempbuff);
+ tempbuff++;
+ bytestransferred += 4U;
+ }
+ }
+ else
+ {
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0U; count < 8U; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
+ }
+
+ tempbuff += 8U;
+ bytestransferred += 32U;
+ }
+ }
+ }
+ }
+ else
+ {
+ /* In case of single data block transfer no need of stop command at all */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
+ {
+ if ((totalnumberofbytes - bytestransferred) < 32U)
+ {
+ restwords = ((totalnumberofbytes - bytestransferred) % 4U == 0U) ? ((totalnumberofbytes - bytestransferred) / 4U) : (( totalnumberofbytes - bytestransferred) / 4U + 1U);
+
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0U; count < restwords; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, tempbuff);
+ tempbuff++;
+ bytestransferred += 4U;
+ }
+ }
+ else
+ {
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0U; count < 8U; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
+ }
+
+ tempbuff += 8U;
+ bytestransferred += 32U;
+ }
+ }
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock write */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
+ {
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send stop transmission command */
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+ }
+
+ /* Get error state */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
+
+ errorstate = SD_TX_UNDERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Wait till the card is in programming state */
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+
+ while ((errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+ {
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by the function HAL_SD_CheckReadOperation()
+ * to check the completion of the read process
+ * @param hsd: SD handle
+ * @param pReadBuffer: Pointer to the buffer that will contain the received data
+ * @param ReadAddr: Address from where data is to be read
+ * @param BlockSize: SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of blocks to read.
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ /* Initialize handle flags */
+ hsd->SdTransferCplt = 0U;
+ hsd->DmaTransferCplt = 0U;
+ hsd->SdTransferErr = SD_OK;
+
+ /* Initialize SD Read operation */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->SdOperation = SD_READ_MULTIPLE_BLOCK;
+ }
+ else
+ {
+ hsd->SdOperation = SD_READ_SINGLE_BLOCK;
+ }
+
+ /* Enable transfer interrupts */
+#ifdef SDIO_STA_STBITERR
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_RXOVERR |\
+ SDIO_IT_STBITERR));
+#else /* SDIO_STA_STBITERR not defined */
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_RXOVERR));
+#endif /* SDIO_STA_STBITERR */
+
+ /* Enable SDIO DMA transfer */
+ __HAL_SD_SDIO_DMA_ENABLE();
+
+ /* Configure DMA user callbacks */
+ hsd->hdmarx->XferCpltCallback = SD_DMA_RxCplt;
+ hsd->hdmarx->XferErrorCallback = SD_DMA_RxError;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pReadBuffer, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512U;
+ ReadAddr /= 512U;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Check number of blocks command */
+ if(NumberOfBlocks > 1U)
+ {
+ /* Send CMD18 READ_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+ }
+ else
+ {
+ /* Send CMD17 READ_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ if(NumberOfBlocks > 1U)
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+ }
+ else
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
+ }
+
+ /* Update the SD transfer error in SD handle */
+ hsd->SdTransferErr = errorstate;
+
+ return errorstate;
+}
+
+
+/**
+ * @brief Writes block(s) to a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by the function HAL_SD_CheckWriteOperation()
+ * to check the completion of the write process (by SD current status polling).
+ * @param hsd: SD handle
+ * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit
+ * @param WriteAddr: Address from where data is to be read
+ * @param BlockSize: the SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of blocks to write
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ /* Initialize handle flags */
+ hsd->SdTransferCplt = 0U;
+ hsd->DmaTransferCplt = 0U;
+ hsd->SdTransferErr = SD_OK;
+
+ /* Initialize SD Write operation */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->SdOperation = SD_WRITE_MULTIPLE_BLOCK;
+ }
+ else
+ {
+ hsd->SdOperation = SD_WRITE_SINGLE_BLOCK;
+ }
+
+ /* Enable transfer interrupts */
+#ifdef SDIO_STA_STBITERR
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_TXUNDERR |\
+ SDIO_IT_STBITERR));
+#else /* SDIO_STA_STBITERR not defined */
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_TXUNDERR));
+#endif /* SDIO_STA_STBITERR */
+
+ /* Configure DMA user callbacks */
+ hsd->hdmatx->XferCpltCallback = SD_DMA_TxCplt;
+ hsd->hdmatx->XferErrorCallback = SD_DMA_TxError;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pWriteBuffer, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+
+ /* Enable SDIO DMA transfer */
+ __HAL_SD_SDIO_DMA_ENABLE();
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512U;
+ WriteAddr /= 512U;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Check number of blocks command */
+ if(NumberOfBlocks <= 1U)
+ {
+ /* Send CMD24 WRITE_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+ }
+ else
+ {
+ /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ if(NumberOfBlocks > 1U)
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+ }
+ else
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+ }
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ hsd->SdTransferErr = errorstate;
+
+ return errorstate;
+}
+
+/**
+ * @brief This function waits until the SD DMA data read transfer is finished.
+ * This API should be called after HAL_SD_ReadBlocks_DMA() function
+ * to insure that all data sent by the card is already transferred by the
+ * DMA controller.
+ * @param hsd: SD handle
+ * @param Timeout: Timeout duration
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t timeout = Timeout;
+ uint32_t tmp1, tmp2;
+ HAL_SD_ErrorTypedef tmp3;
+
+ /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+
+ while ((tmp1 == 0U) && (tmp2 == 0U) && (tmp3 == SD_OK) && (timeout > 0U))
+ {
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+ timeout--;
+ }
+
+ timeout = Timeout;
+
+ /* Wait until the Rx transfer is no longer active */
+ while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXACT)) && (timeout > 0U))
+ {
+ timeout--;
+ }
+
+ /* Send stop command in multiblock read */
+ if (hsd->SdOperation == SD_READ_MULTIPLE_BLOCK)
+ {
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+
+ if ((timeout == 0U) && (errorstate == SD_OK))
+ {
+ errorstate = SD_DATA_TIMEOUT;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Return error state */
+ if (hsd->SdTransferErr != SD_OK)
+ {
+ return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief This function waits until the SD DMA data write transfer is finished.
+ * This API should be called after HAL_SD_WriteBlocks_DMA() function
+ * to insure that all data sent by the card is already transferred by the
+ * DMA controller.
+ * @param hsd: SD handle
+ * @param Timeout: Timeout duration
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t timeout = Timeout;
+ uint32_t tmp1, tmp2;
+ HAL_SD_ErrorTypedef tmp3;
+
+ /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+
+ while ((tmp1 == 0U) && (tmp2 == 0U) && (tmp3 == SD_OK) && (timeout > 0U))
+ {
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+ timeout--;
+ }
+
+ timeout = Timeout;
+
+ /* Wait until the Tx transfer is no longer active */
+ while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXACT)) && (timeout > 0U))
+ {
+ timeout--;
+ }
+
+ /* Send stop command in multiblock write */
+ if (hsd->SdOperation == SD_WRITE_MULTIPLE_BLOCK)
+ {
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+
+ if ((timeout == 0U) && (errorstate == SD_OK))
+ {
+ errorstate = SD_DATA_TIMEOUT;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Return error state */
+ if (hsd->SdTransferErr != SD_OK)
+ {
+ return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+ }
+
+ /* Wait until write is complete */
+ while(HAL_SD_GetStatus(hsd) != SD_TRANSFER_OK)
+ {
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Erases the specified memory area of the given SD card.
+ * @param hsd: SD handle
+ * @param startaddr: Start byte address
+ * @param endaddr: End byte address
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+
+ uint32_t delay = 0U;
+ __IO uint32_t maxdelay = 0U;
+ uint8_t cardstate = 0U;
+
+ /* Check if the card command class supports erase command */
+ if (((hsd->CSD[1U] >> 20U) & SD_CCCC_ERASE) == 0U)
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+
+ /* Get max delay value */
+ maxdelay = 120000U / (((hsd->Instance->CLKCR) & 0xFFU) + 2U);
+
+ if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Get start and end block for high capacity cards */
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ startaddr /= 512U;
+ endaddr /= 512U;
+ }
+
+ /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send CMD32 SD_ERASE_GRP_START with argument as addr */
+ sdio_cmdinitstructure.Argument =(uint32_t)startaddr;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_START;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_START);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD33 SD_ERASE_GRP_END with argument as addr */
+ sdio_cmdinitstructure.Argument = (uint32_t)endaddr;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_END;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_END);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+ }
+
+ /* Send CMD38 ERASE */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_ERASE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_ERASE);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ for (; delay < maxdelay; delay++)
+ {
+ }
+
+ /* Wait until the card is in programming state */
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+
+ delay = SD_DATATIMEOUT;
+
+ while ((delay > 0U) && (errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+ {
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+ delay--;
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief This function handles SD card interrupt request.
+ * @param hsd: SD handle
+ * @retval None
+ */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd)
+{
+ /* Check for SDIO interrupt flags */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DATAEND))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_IT_DATAEND);
+
+ /* SD transfer is complete */
+ hsd->SdTransferCplt = 1U;
+
+ /* No transfer error */
+ hsd->SdTransferErr = SD_OK;
+
+ HAL_SD_XferCpltCallback(hsd);
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ hsd->SdTransferErr = SD_DATA_CRC_FAIL;
+
+ HAL_SD_XferErrorCallback(hsd);
+
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ hsd->SdTransferErr = SD_DATA_TIMEOUT;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ hsd->SdTransferErr = SD_RX_OVERRUN;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_TXUNDERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
+
+ hsd->SdTransferErr = SD_TX_UNDERRUN;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ hsd->SdTransferErr = SD_START_BIT_ERR;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Disable all SDIO peripheral interrupt sources */
+#ifdef SDIO_STA_STBITERR
+ __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\
+ SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
+ SDIO_IT_RXOVERR | SDIO_IT_STBITERR);
+#else /* SDIO_STA_STBITERR not defined */
+ __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\
+ SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
+ SDIO_IT_RXOVERR);
+#endif /* SDIO_STA_STBITERR */
+}
+
+
+/**
+ * @brief SD end of transfer callback.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_XferCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Transfer Error callback.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_XferErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Transfer complete Rx callback in non blocking mode.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD DMA transfer complete Rx error callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_RxErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Transfer complete Tx callback in non blocking mode.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD DMA transfer complete error Tx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_TxErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group3
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SD card
+ operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns information about specific card.
+ * @param hsd: SD handle
+ * @param pCardInfo: Pointer to a HAL_SD_CardInfoTypedef structure that
+ * contains all SD cardinformation
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t tmp = 0U;
+
+ pCardInfo->CardType = (uint8_t)(hsd->CardType);
+ pCardInfo->RCA = (uint16_t)(hsd->RCA);
+
+ /* Byte 0 */
+ tmp = (hsd->CSD[0U] & 0xFF000000U) >> 24U;
+ pCardInfo->SD_csd.CSDStruct = (uint8_t)((tmp & 0xC0U) >> 6U);
+ pCardInfo->SD_csd.SysSpecVersion = (uint8_t)((tmp & 0x3CU) >> 2U);
+ pCardInfo->SD_csd.Reserved1 = tmp & 0x03U;
+
+ /* Byte 1 */
+ tmp = (hsd->CSD[0U] & 0x00FF0000U) >> 16U;
+ pCardInfo->SD_csd.TAAC = (uint8_t)tmp;
+
+ /* Byte 2 */
+ tmp = (hsd->CSD[0U] & 0x0000FF00U) >> 8U;
+ pCardInfo->SD_csd.NSAC = (uint8_t)tmp;
+
+ /* Byte 3 */
+ tmp = hsd->CSD[0U] & 0x000000FFU;
+ pCardInfo->SD_csd.MaxBusClkFrec = (uint8_t)tmp;
+
+ /* Byte 4 */
+ tmp = (hsd->CSD[1U] & 0xFF000000U) >> 24U;
+ pCardInfo->SD_csd.CardComdClasses = (uint16_t)(tmp << 4U);
+
+ /* Byte 5 */
+ tmp = (hsd->CSD[1U] & 0x00FF0000U) >> 16U;
+ pCardInfo->SD_csd.CardComdClasses |= (uint16_t)((tmp & 0xF0) >> 4U);
+ pCardInfo->SD_csd.RdBlockLen = (uint8_t)(tmp & 0x0FU);
+
+ /* Byte 6 */
+ tmp = (hsd->CSD[1U] & 0x0000FF00U) >> 8U;
+ pCardInfo->SD_csd.PartBlockRead = (uint8_t)((tmp & 0x80U) >> 7U);
+ pCardInfo->SD_csd.WrBlockMisalign = (uint8_t)((tmp & 0x40U) >> 6U);
+ pCardInfo->SD_csd.RdBlockMisalign = (uint8_t)((tmp & 0x20U) >> 5U);
+ pCardInfo->SD_csd.DSRImpl = (uint8_t)((tmp & 0x10U) >> 4U);
+ pCardInfo->SD_csd.Reserved2 = 0U; /*!< Reserved */
+
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0))
+ {
+ pCardInfo->SD_csd.DeviceSize = (tmp & 0x03U) << 10U;
+
+ /* Byte 7 */
+ tmp = (uint8_t)(hsd->CSD[1U] & 0x000000FFU);
+ pCardInfo->SD_csd.DeviceSize |= (tmp) << 2U;
+
+ /* Byte 8 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_csd.DeviceSize |= (tmp & 0xC0U) >> 6U;
+
+ pCardInfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38U) >> 3U;
+ pCardInfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07U);
+
+ /* Byte 9 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0U) >> 5U;
+ pCardInfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1CU) >> 2U;
+ pCardInfo->SD_csd.DeviceSizeMul = (tmp & 0x03U) << 1U;
+ /* Byte 10 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_csd.DeviceSizeMul |= (tmp & 0x80U) >> 7U;
+
+ pCardInfo->CardCapacity = (pCardInfo->SD_csd.DeviceSize + 1U) ;
+ pCardInfo->CardCapacity *= (1U << (pCardInfo->SD_csd.DeviceSizeMul + 2U));
+ pCardInfo->CardBlockSize = 1U << (pCardInfo->SD_csd.RdBlockLen);
+ pCardInfo->CardCapacity *= pCardInfo->CardBlockSize;
+ }
+ else if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ /* Byte 7 */
+ tmp = (uint8_t)(hsd->CSD[1U] & 0x000000FFU);
+ pCardInfo->SD_csd.DeviceSize = (tmp & 0x3FU) << 16U;
+
+ /* Byte 8 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0xFF000000U) >> 24U);
+
+ pCardInfo->SD_csd.DeviceSize |= (tmp << 8U);
+
+ /* Byte 9 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0x00FF0000U) >> 16U);
+
+ pCardInfo->SD_csd.DeviceSize |= (tmp);
+
+ /* Byte 10 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0x0000FF00U) >> 8U);
+
+ pCardInfo->CardCapacity = (uint64_t)((((uint64_t)pCardInfo->SD_csd.DeviceSize + 1U)) * 512U * 1024U);
+ pCardInfo->CardBlockSize = 512U;
+ }
+ else
+ {
+ /* Not supported card type */
+ errorstate = SD_ERROR;
+ }
+
+ pCardInfo->SD_csd.EraseGrSize = (tmp & 0x40U) >> 6U;
+ pCardInfo->SD_csd.EraseGrMul = (tmp & 0x3FU) << 1U;
+
+ /* Byte 11 */
+ tmp = (uint8_t)(hsd->CSD[2U] & 0x000000FFU);
+ pCardInfo->SD_csd.EraseGrMul |= (tmp & 0x80U) >> 7U;
+ pCardInfo->SD_csd.WrProtectGrSize = (tmp & 0x7FU);
+
+ /* Byte 12 */
+ tmp = (uint8_t)((hsd->CSD[3U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_csd.WrProtectGrEnable = (tmp & 0x80U) >> 7U;
+ pCardInfo->SD_csd.ManDeflECC = (tmp & 0x60U) >> 5U;
+ pCardInfo->SD_csd.WrSpeedFact = (tmp & 0x1CU) >> 2U;
+ pCardInfo->SD_csd.MaxWrBlockLen = (tmp & 0x03U) << 2U;
+
+ /* Byte 13 */
+ tmp = (uint8_t)((hsd->CSD[3U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_csd.MaxWrBlockLen |= (tmp & 0xC0U) >> 6U;
+ pCardInfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20U) >> 5U;
+ pCardInfo->SD_csd.Reserved3 = 0U;
+ pCardInfo->SD_csd.ContentProtectAppli = (tmp & 0x01U);
+
+ /* Byte 14 */
+ tmp = (uint8_t)((hsd->CSD[3U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_csd.FileFormatGrouop = (tmp & 0x80U) >> 7U;
+ pCardInfo->SD_csd.CopyFlag = (tmp & 0x40U) >> 6U;
+ pCardInfo->SD_csd.PermWrProtect = (tmp & 0x20U) >> 5U;
+ pCardInfo->SD_csd.TempWrProtect = (tmp & 0x10U) >> 4U;
+ pCardInfo->SD_csd.FileFormat = (tmp & 0x0CU) >> 2U;
+ pCardInfo->SD_csd.ECC = (tmp & 0x03U);
+
+ /* Byte 15 */
+ tmp = (uint8_t)(hsd->CSD[3U] & 0x000000FFU);
+ pCardInfo->SD_csd.CSD_CRC = (tmp & 0xFEU) >> 1U;
+ pCardInfo->SD_csd.Reserved4 = 1U;
+
+ /* Byte 0 */
+ tmp = (uint8_t)((hsd->CID[0U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_cid.ManufacturerID = tmp;
+
+ /* Byte 1 */
+ tmp = (uint8_t)((hsd->CID[0U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_cid.OEM_AppliID = tmp << 8U;
+
+ /* Byte 2 */
+ tmp = (uint8_t)((hsd->CID[0U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_cid.OEM_AppliID |= tmp;
+
+ /* Byte 3 */
+ tmp = (uint8_t)(hsd->CID[0U] & 0x000000FFU);
+ pCardInfo->SD_cid.ProdName1 = tmp << 24U;
+
+ /* Byte 4 */
+ tmp = (uint8_t)((hsd->CID[1U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_cid.ProdName1 |= tmp << 16U;
+
+ /* Byte 5 */
+ tmp = (uint8_t)((hsd->CID[1U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_cid.ProdName1 |= tmp << 8U;
+
+ /* Byte 6 */
+ tmp = (uint8_t)((hsd->CID[1U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_cid.ProdName1 |= tmp;
+
+ /* Byte 7 */
+ tmp = (uint8_t)(hsd->CID[1U] & 0x000000FFU);
+ pCardInfo->SD_cid.ProdName2 = tmp;
+
+ /* Byte 8 */
+ tmp = (uint8_t)((hsd->CID[2U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_cid.ProdRev = tmp;
+
+ /* Byte 9 */
+ tmp = (uint8_t)((hsd->CID[2U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_cid.ProdSN = tmp << 24U;
+
+ /* Byte 10 */
+ tmp = (uint8_t)((hsd->CID[2U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_cid.ProdSN |= tmp << 16U;
+
+ /* Byte 11 */
+ tmp = (uint8_t)(hsd->CID[2U] & 0x000000FFU);
+ pCardInfo->SD_cid.ProdSN |= tmp << 8U;
+
+ /* Byte 12 */
+ tmp = (uint8_t)((hsd->CID[3U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_cid.ProdSN |= tmp;
+
+ /* Byte 13 */
+ tmp = (uint8_t)((hsd->CID[3U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_cid.Reserved1 |= (tmp & 0xF0U) >> 4U;
+ pCardInfo->SD_cid.ManufactDate = (tmp & 0x0FU) << 8U;
+
+ /* Byte 14 */
+ tmp = (uint8_t)((hsd->CID[3U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_cid.ManufactDate |= tmp;
+
+ /* Byte 15 */
+ tmp = (uint8_t)(hsd->CID[3U] & 0x000000FFU);
+ pCardInfo->SD_cid.CID_CRC = (tmp & 0xFEU) >> 1U;
+ pCardInfo->SD_cid.Reserved2 = 1U;
+
+ return errorstate;
+}
+
+/**
+ * @brief Enables wide bus operation for the requested card if supported by
+ * card.
+ * @param hsd: SD handle
+ * @param WideMode: Specifies the SD card wide bus mode
+ * This parameter can be one of the following values:
+ * @arg SDIO_BUS_WIDE_8B: 8-bit data transfer (Only for MMC)
+ * @arg SDIO_BUS_WIDE_4B: 4-bit data transfer
+ * @arg SDIO_BUS_WIDE_1B: 1-bit data transfer
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SDIO_InitTypeDef tmpinit;
+
+ /* MMC Card does not support this feature */
+ if (hsd->CardType == MULTIMEDIA_CARD)
+ {
+ errorstate = SD_UNSUPPORTED_FEATURE;
+
+ return errorstate;
+ }
+ else if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ if (WideMode == SDIO_BUS_WIDE_8B)
+ {
+ errorstate = SD_UNSUPPORTED_FEATURE;
+ }
+ else if (WideMode == SDIO_BUS_WIDE_4B)
+ {
+ errorstate = SD_WideBus_Enable(hsd);
+ }
+ else if (WideMode == SDIO_BUS_WIDE_1B)
+ {
+ errorstate = SD_WideBus_Disable(hsd);
+ }
+ else
+ {
+ /* WideMode is not a valid argument*/
+ errorstate = SD_INVALID_PARAMETER;
+ }
+
+ if (errorstate == SD_OK)
+ {
+ /* Configure the SDIO peripheral */
+ tmpinit.ClockEdge = hsd->Init.ClockEdge;
+ tmpinit.ClockBypass = hsd->Init.ClockBypass;
+ tmpinit.ClockPowerSave = hsd->Init.ClockPowerSave;
+ tmpinit.BusWide = WideMode;
+ tmpinit.HardwareFlowControl = hsd->Init.HardwareFlowControl;
+ tmpinit.ClockDiv = hsd->Init.ClockDiv;
+ SDIO_Init(hsd->Instance, tmpinit);
+ }
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Aborts an ongoing data transfer.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Send CMD12 STOP_TRANSMISSION */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_STOP_TRANSMISSION;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_STOP_TRANSMISSION);
+
+ return errorstate;
+}
+
+/**
+ * @brief Switches the SD card to High Speed mode.
+ * This API must be used after "Transfer State"
+ * @note This operation should be followed by the configuration
+ * of PLL to have SDIOCK clock between 67 and 75 MHz
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+
+ uint8_t SD_hs[64U] = {0U};
+ uint32_t SD_scr[2U] = {0U, 0U};
+ uint32_t SD_SPEC = 0U;
+ uint32_t count = 0U, *tempbuff = (uint32_t *)SD_hs;
+
+ /* Initialize the Data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, SD_scr);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Test the Version supported by the card*/
+ SD_SPEC = (SD_scr[1U] & 0x01000000U) | (SD_scr[1U] & 0x02000000U);
+
+ if (SD_SPEC != SD_ALLZERO)
+ {
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)64U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = 64U;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B ;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Send CMD6 switch mode */
+ sdio_cmdinitstructure.Argument = 0x80FFFF01U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_HS_SWITCH;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_HS_SWITCH);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ for (count = 0U; count < 8U; count++)
+ {
+ *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ tempbuff += 8U;
+ }
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ count = SD_DATATIMEOUT;
+
+ while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0U))
+ {
+ *tempbuff = SDIO_ReadFIFO(hsd->Instance);
+ tempbuff++;
+ count--;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Test if the switch mode HS is ok */
+ if ((SD_hs[13U]& 2U) != 2U)
+ {
+ errorstate = SD_UNSUPPORTED_FEATURE;
+ }
+ }
+
+ return errorstate;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group4
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in runtime the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the current SD card's status.
+ * @param hsd: SD handle
+ * @param pSDstatus: Pointer to the buffer that will contain the SD card status
+ * SD Status register)
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t count = 0U;
+
+ /* Check SD response */
+ if ((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Set block size for card if it is not equal to current block size for card */
+ sdio_cmdinitstructure.Argument = 64U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD55 */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = 64U;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Send ACMD13 (SD_APP_STATUS) with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_STATUS;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_STATUS);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get status data */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ for (count = 0U; count < 8U; count++)
+ {
+ *(pSDstatus + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ pSDstatus += 8U;
+ }
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ count = SD_DATATIMEOUT;
+ while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0U))
+ {
+ *pSDstatus = SDIO_ReadFIFO(hsd->Instance);
+ pSDstatus++;
+ count--;
+ }
+
+ /* Clear all the static status flags*/
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Gets the current sd card data status.
+ * @param hsd: SD handle
+ * @retval Data Transfer state
+ */
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_CardStateTypedef cardstate = SD_CARD_TRANSFER;
+
+ /* Get SD card state */
+ cardstate = SD_GetState(hsd);
+
+ /* Find SD status according to card state*/
+ if (cardstate == SD_CARD_TRANSFER)
+ {
+ return SD_TRANSFER_OK;
+ }
+ else if(cardstate == SD_CARD_ERROR)
+ {
+ return SD_TRANSFER_ERROR;
+ }
+ else
+ {
+ return SD_TRANSFER_BUSY;
+ }
+}
+
+/**
+ * @brief Gets the SD card status.
+ * @param hsd: SD handle
+ * @param pCardStatus: Pointer to the HAL_SD_CardStatusTypedef structure that
+ * will contain the SD card status information
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t tmp = 0U;
+ uint32_t sd_status[16U];
+
+ errorstate = HAL_SD_SendSDStatus(hsd, sd_status);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Byte 0 */
+ tmp = (sd_status[0U] & 0xC0U) >> 6U;
+ pCardStatus->DAT_BUS_WIDTH = (uint8_t)tmp;
+
+ /* Byte 0 */
+ tmp = (sd_status[0U] & 0x20U) >> 5U;
+ pCardStatus->SECURED_MODE = (uint8_t)tmp;
+
+ /* Byte 2 */
+ tmp = (sd_status[2U] & 0xFFU);
+ pCardStatus->SD_CARD_TYPE = (uint8_t)(tmp << 8U);
+
+ /* Byte 3 */
+ tmp = (sd_status[3U] & 0xFFU);
+ pCardStatus->SD_CARD_TYPE |= (uint8_t)tmp;
+
+ /* Byte 4 */
+ tmp = (sd_status[4U] & 0xFFU);
+ pCardStatus->SIZE_OF_PROTECTED_AREA = (uint8_t)(tmp << 24U);
+
+ /* Byte 5 */
+ tmp = (sd_status[5U] & 0xFFU);
+ pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 16U);
+
+ /* Byte 6 */
+ tmp = (sd_status[6U] & 0xFFU);
+ pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 8U);
+
+ /* Byte 7 */
+ tmp = (sd_status[7U] & 0xFFU);
+ pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)tmp;
+
+ /* Byte 8 */
+ tmp = (sd_status[8U] & 0xFFU);
+ pCardStatus->SPEED_CLASS = (uint8_t)tmp;
+
+ /* Byte 9 */
+ tmp = (sd_status[9U] & 0xFFU);
+ pCardStatus->PERFORMANCE_MOVE = (uint8_t)tmp;
+
+ /* Byte 10 */
+ tmp = (sd_status[10U] & 0xF0U) >> 4U;
+ pCardStatus->AU_SIZE = (uint8_t)tmp;
+
+ /* Byte 11 */
+ tmp = (sd_status[11U] & 0xFFU);
+ pCardStatus->ERASE_SIZE = (uint8_t)(tmp << 8U);
+
+ /* Byte 12 */
+ tmp = (sd_status[12U] & 0xFFU);
+ pCardStatus->ERASE_SIZE |= (uint8_t)tmp;
+
+ /* Byte 13 */
+ tmp = (sd_status[13U] & 0xFCU) >> 2U;
+ pCardStatus->ERASE_TIMEOUT = (uint8_t)tmp;
+
+ /* Byte 13 */
+ tmp = (sd_status[13U] & 0x3U);
+ pCardStatus->ERASE_OFFSET = (uint8_t)tmp;
+
+ return errorstate;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private function ----------------------------------------------------------*/
+/** @addtogroup SD_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief SD DMA transfer complete Rx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* DMA transfer is complete */
+ hsd->DmaTransferCplt = 1U;
+
+ /* Wait until SD transfer is complete */
+ while(hsd->SdTransferCplt == 0U)
+ {
+ }
+
+ /* Disable the DMA channel */
+ HAL_DMA_Abort(hdma);
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_RxCpltCallback(hsd->hdmarx);
+}
+
+/**
+ * @brief SD DMA transfer Error Rx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_RxErrorCallback(hsd->hdmarx);
+}
+
+/**
+ * @brief SD DMA transfer complete Tx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* DMA transfer is complete */
+ hsd->DmaTransferCplt = 1U;
+
+ /* Wait until SD transfer is complete */
+ while(hsd->SdTransferCplt == 0U)
+ {
+ }
+
+ /* Disable the DMA channel */
+ HAL_DMA_Abort(hdma);
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_TxCpltCallback(hsd->hdmatx);
+}
+
+/**
+ * @brief SD DMA transfer Error Tx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = ( SD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_TxErrorCallback(hsd->hdmatx);
+}
+
+/**
+ * @brief Returns the SD current state.
+ * @param hsd: SD handle
+ * @retval SD card current state
+ */
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd)
+{
+ uint32_t resp1 = 0U;
+
+ if (SD_SendStatus(hsd, &resp1) != SD_OK)
+ {
+ return SD_CARD_ERROR;
+ }
+ else
+ {
+ return (HAL_SD_CardStateTypedef)((resp1 >> 9U) & 0x0FU);
+ }
+}
+
+/**
+ * @brief Initializes all cards or single card as the case may be Card(s) come
+ * into standby state.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint16_t sd_rca = 1U;
+
+ if(SDIO_GetPowerState(hsd->Instance) == 0U) /* Power off */
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+
+ if(hsd->CardType != SECURE_DIGITAL_IO_CARD)
+ {
+ /* Send CMD2 ALL_SEND_CID */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_ALL_SEND_CID;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp2Error(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get Card identification number data */
+ hsd->CID[0U] = SDIO_GetResponse(SDIO_RESP1);
+ hsd->CID[1U] = SDIO_GetResponse(SDIO_RESP2);
+ hsd->CID[2U] = SDIO_GetResponse(SDIO_RESP3);
+ hsd->CID[3U] = SDIO_GetResponse(SDIO_RESP4);
+ }
+
+ if((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == SECURE_DIGITAL_IO_COMBO_CARD) || (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send CMD3 SET_REL_ADDR with argument 0 */
+ /* SD Card publishes its RCA. */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_REL_ADDR;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp6Error(hsd, SD_CMD_SET_REL_ADDR, &sd_rca);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+ }
+
+ if (hsd->CardType != SECURE_DIGITAL_IO_CARD)
+ {
+ /* Get the SD card RCA */
+ hsd->RCA = sd_rca;
+
+ /* Send CMD9 SEND_CSD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_CSD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp2Error(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get Card Specific Data */
+ hsd->CSD[0U] = SDIO_GetResponse(SDIO_RESP1);
+ hsd->CSD[1U] = SDIO_GetResponse(SDIO_RESP2);
+ hsd->CSD[2U] = SDIO_GetResponse(SDIO_RESP3);
+ hsd->CSD[3U] = SDIO_GetResponse(SDIO_RESP4);
+ }
+
+ /* All cards are initialized */
+ return errorstate;
+}
+
+/**
+ * @brief Selects of Deselects the corresponding card.
+ * @param hsd: SD handle
+ * @param addr: Address of the card to be selected
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Send CMD7 SDIO_SEL_DESEL_CARD */
+ sdio_cmdinitstructure.Argument = (uint32_t)addr;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEL_DESEL_CARD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEL_DESEL_CARD);
+
+ return errorstate;
+}
+
+/**
+ * @brief Enquires cards about their operating voltage and configures clock
+ * controls and stores SD information that will be needed in future
+ * in the SD handle.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t response = 0U, count = 0U, validvoltage = 0U;
+ uint32_t sdtype = SD_STD_CAPACITY;
+
+ /* Power ON Sequence -------------------------------------------------------*/
+ /* Disable SDIO Clock */
+ __HAL_SD_SDIO_DISABLE();
+
+ /* Set Power State to ON */
+ SDIO_PowerState_ON(hsd->Instance);
+
+ /* 1ms: required power up waiting time before starting the SD initialization
+ sequence */
+ HAL_Delay(1);
+
+ /* Enable SDIO Clock */
+ __HAL_SD_SDIO_ENABLE();
+
+ /* CMD0: GO_IDLE_STATE -----------------------------------------------------*/
+ /* No CMD response required */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_GO_IDLE_STATE;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_NO;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdError(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ /* CMD Response Timeout (wait for CMDSENT flag) */
+ return errorstate;
+ }
+
+ /* CMD8: SEND_IF_COND ------------------------------------------------------*/
+ /* Send CMD8 to verify SD card interface operating condition */
+ /* Argument: - [31:12]: Reserved (shall be set to '0')
+ - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V)
+ - [7:0]: Check Pattern (recommended 0xAA) */
+ /* CMD Response: R7 */
+ sdio_cmdinitstructure.Argument = SD_CHECK_PATTERN;
+ sdio_cmdinitstructure.CmdIndex = SD_SDIO_SEND_IF_COND;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp7Error(hsd);
+
+ if (errorstate == SD_OK)
+ {
+ /* SD Card 2.0 */
+ hsd->CardType = STD_CAPACITY_SD_CARD_V2_0;
+ sdtype = SD_HIGH_CAPACITY;
+ }
+
+ /* Send CMD55 */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ /* If errorstate is Command Timeout, it is a MMC card */
+ /* If errorstate is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch)
+ or SD card 1.x */
+ if(errorstate == SD_OK)
+ {
+ /* SD CARD */
+ /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */
+ while((!validvoltage) && (count < SD_MAX_VOLT_TRIAL))
+ {
+
+ /* SEND CMD55 APP_CMD with RCA as 0 */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD41 */
+ sdio_cmdinitstructure.Argument = SD_VOLTAGE_WINDOW_SD | sdtype;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_OP_COND;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp3Error(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get command response */
+ response = SDIO_GetResponse(SDIO_RESP1);
+
+ /* Get operating voltage*/
+ validvoltage = (((response >> 31U) == 1U) ? 1U : 0U);
+
+ count++;
+ }
+
+ if(count >= SD_MAX_VOLT_TRIAL)
+ {
+ errorstate = SD_INVALID_VOLTRANGE;
+
+ return errorstate;
+ }
+
+ if((response & SD_HIGH_CAPACITY) == SD_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */
+ {
+ hsd->CardType = HIGH_CAPACITY_SD_CARD;
+ }
+
+ } /* else MMC Card */
+
+ return errorstate;
+}
+
+/**
+ * @brief Turns the SDIO output signals off.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Set Power State to OFF */
+ SDIO_PowerState_OFF(hsd->Instance);
+
+ return errorstate;
+}
+
+/**
+ * @brief Returns the current card's status.
+ * @param hsd: SD handle
+ * @param pCardStatus: pointer to the buffer that will contain the SD card
+ * status (Card Status register)
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ if(pCardStatus == NULL)
+ {
+ errorstate = SD_INVALID_PARAMETER;
+
+ return errorstate;
+ }
+
+ /* Send Status command */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEND_STATUS);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get SD card status */
+ *pCardStatus = SDIO_GetResponse(SDIO_RESP1);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for CMD0.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t timeout, tmp;
+
+ timeout = SDIO_CMD0TIMEOUT;
+
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
+
+ while((timeout > 0U) && (!tmp))
+ {
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
+ timeout--;
+ }
+
+ if(timeout == 0U)
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R7 response.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_ERROR;
+ uint32_t timeout = SDIO_CMD0TIMEOUT, tmp;
+
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
+
+ while((!tmp) && (timeout > 0U))
+ {
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
+ timeout--;
+ }
+
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ if((timeout == 0U) || tmp)
+ {
+ /* Card is not V2.0 compliant or card does not support the set voltage range */
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDREND))
+ {
+ /* Card is SD V2.0 compliant */
+ errorstate = SD_OK;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CMDREND);
+
+ return errorstate;
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R1 response.
+ * @param hsd: SD handle
+ * @param SD_CMD: The sent command index
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t response_r1;
+
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+
+ /* Check response received is of desired command */
+ if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
+ {
+ errorstate = SD_ILLEGAL_CMD;
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* We have received response, retrieve it for analysis */
+ response_r1 = SDIO_GetResponse(SDIO_RESP1);
+
+ if((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+ {
+ return errorstate;
+ }
+
+ if((response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+ {
+ return(SD_ADDR_OUT_OF_RANGE);
+ }
+
+ if((response_r1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+ {
+ return(SD_ADDR_MISALIGNED);
+ }
+
+ if((response_r1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+ {
+ return(SD_BLOCK_LEN_ERR);
+ }
+
+ if((response_r1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+ {
+ return(SD_ERASE_SEQ_ERR);
+ }
+
+ if((response_r1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+ {
+ return(SD_BAD_ERASE_PARAM);
+ }
+
+ if((response_r1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+ {
+ return(SD_WRITE_PROT_VIOLATION);
+ }
+
+ if((response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+ {
+ return(SD_LOCK_UNLOCK_FAILED);
+ }
+
+ if((response_r1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+ {
+ return(SD_COM_CRC_FAILED);
+ }
+
+ if((response_r1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+ {
+ return(SD_ILLEGAL_CMD);
+ }
+
+ if((response_r1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+ {
+ return(SD_CARD_ECC_FAILED);
+ }
+
+ if((response_r1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+ {
+ return(SD_CC_ERROR);
+ }
+
+ if((response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+ {
+ return(SD_GENERAL_UNKNOWN_ERROR);
+ }
+
+ if((response_r1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+ {
+ return(SD_STREAM_READ_UNDERRUN);
+ }
+
+ if((response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+ {
+ return(SD_STREAM_WRITE_OVERRUN);
+ }
+
+ if((response_r1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+ {
+ return(SD_CID_CSD_OVERWRITE);
+ }
+
+ if((response_r1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+ {
+ return(SD_WP_ERASE_SKIP);
+ }
+
+ if((response_r1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+ {
+ return(SD_CARD_ECC_DISABLED);
+ }
+
+ if((response_r1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+ {
+ return(SD_ERASE_RESET);
+ }
+
+ if((response_r1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+ {
+ return(SD_AKE_SEQ_ERROR);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R3 (OCR) response.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R2 (CID or CSD) response.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R6 (RCA) response.
+ * @param hsd: SD handle
+ * @param SD_CMD: The sent command index
+ * @param pRCA: Pointer to the variable that will contain the SD card relative
+ * address RCA
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t response_r1;
+
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Check response received is of desired command */
+ if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
+ {
+ errorstate = SD_ILLEGAL_CMD;
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* We have received response, retrieve it. */
+ response_r1 = SDIO_GetResponse(SDIO_RESP1);
+
+ if((response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED)) == SD_ALLZERO)
+ {
+ *pRCA = (uint16_t) (response_r1 >> 16U);
+
+ return errorstate;
+ }
+
+ if((response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) == SD_R6_GENERAL_UNKNOWN_ERROR)
+ {
+ return(SD_GENERAL_UNKNOWN_ERROR);
+ }
+
+ if((response_r1 & SD_R6_ILLEGAL_CMD) == SD_R6_ILLEGAL_CMD)
+ {
+ return(SD_ILLEGAL_CMD);
+ }
+
+ if((response_r1 & SD_R6_COM_CRC_FAILED) == SD_R6_COM_CRC_FAILED)
+ {
+ return(SD_COM_CRC_FAILED);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Enables the SDIO wide bus mode.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ uint32_t scr[2U] = {0U, 0U};
+
+ if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, scr);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* If requested card supports wide bus operation */
+ if((scr[1U] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO)
+ {
+ /* Send CMD55 APP_CMD with argument as card's RCA.*/
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */
+ sdio_cmdinitstructure.Argument = 2U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ return errorstate;
+ }
+ else
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+}
+
+/**
+ * @brief Disables the SDIO wide bus mode.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ uint32_t scr[2U] = {0U, 0U};
+
+ if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, scr);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* If requested card supports 1 bit mode operation */
+ if((scr[1U] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO)
+ {
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ return errorstate;
+ }
+ else
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+}
+
+
+/**
+ * @brief Finds the SD card SCR register value.
+ * @param hsd: SD handle
+ * @param pSCR: pointer to the buffer that will contain the SCR value
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t index = 0U;
+ uint32_t tempscr[2U] = {0U, 0U};
+
+ /* Set Block Size To 8 Bytes */
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)8U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)((hsd->RCA) << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = 8U;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_8B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_SEND_SCR;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_SEND_SCR);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL))
+ {
+ *(tempscr + index) = SDIO_ReadFIFO(hsd->Instance);
+ index++;
+ }
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ *(pSCR + 1U) = ((tempscr[0U] & SD_0TO7BITS) << 24U) | ((tempscr[0U] & SD_8TO15BITS) << 8U) |\
+ ((tempscr[0U] & SD_16TO23BITS) >> 8U) | ((tempscr[0U] & SD_24TO31BITS) >> 24U);
+
+ *(pSCR) = ((tempscr[1U] & SD_0TO7BITS) << 24U) | ((tempscr[1U] & SD_8TO15BITS) << 8U) |\
+ ((tempscr[1U] & SD_16TO23BITS) >> 8U) | ((tempscr[1U] & SD_24TO31BITS) >> 24U);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks if the SD card is in programming state.
+ * @param hsd: SD handle
+ * @param pStatus: pointer to the variable that will contain the SD card state
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ __IO uint32_t responseR1 = 0U;
+
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Check response received is of desired command */
+ if((uint32_t)SDIO_GetCommandResponse(hsd->Instance) != SD_CMD_SEND_STATUS)
+ {
+ errorstate = SD_ILLEGAL_CMD;
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+
+ /* We have received response, retrieve it for analysis */
+ responseR1 = SDIO_GetResponse(SDIO_RESP1);
+
+ /* Find out card status */
+ *pStatus = (uint8_t)((responseR1 >> 9U) & 0x0000000FU);
+
+ if((responseR1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+ {
+ return errorstate;
+ }
+
+ if((responseR1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+ {
+ return(SD_ADDR_OUT_OF_RANGE);
+ }
+
+ if((responseR1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+ {
+ return(SD_ADDR_MISALIGNED);
+ }
+
+ if((responseR1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+ {
+ return(SD_BLOCK_LEN_ERR);
+ }
+
+ if((responseR1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+ {
+ return(SD_ERASE_SEQ_ERR);
+ }
+
+ if((responseR1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+ {
+ return(SD_BAD_ERASE_PARAM);
+ }
+
+ if((responseR1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+ {
+ return(SD_WRITE_PROT_VIOLATION);
+ }
+
+ if((responseR1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+ {
+ return(SD_LOCK_UNLOCK_FAILED);
+ }
+
+ if((responseR1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+ {
+ return(SD_COM_CRC_FAILED);
+ }
+
+ if((responseR1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+ {
+ return(SD_ILLEGAL_CMD);
+ }
+
+ if((responseR1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+ {
+ return(SD_CARD_ECC_FAILED);
+ }
+
+ if((responseR1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+ {
+ return(SD_CC_ERROR);
+ }
+
+ if((responseR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+ {
+ return(SD_GENERAL_UNKNOWN_ERROR);
+ }
+
+ if((responseR1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+ {
+ return(SD_STREAM_READ_UNDERRUN);
+ }
+
+ if((responseR1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+ {
+ return(SD_STREAM_WRITE_OVERRUN);
+ }
+
+ if((responseR1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+ {
+ return(SD_CID_CSD_OVERWRITE);
+ }
+
+ if((responseR1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+ {
+ return(SD_WP_ERASE_SKIP);
+ }
+
+ if((responseR1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+ {
+ return(SD_CARD_ECC_DISABLED);
+ }
+
+ if((responseR1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+ {
+ return(SD_ERASE_RESET);
+ }
+
+ if((responseR1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+ {
+ return(SD_AKE_SEQ_ERROR);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#endif /* HAL_SD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,795 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sd.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SD_H
+#define __STM32F4xx_HAL_SD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_sdmmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SD SD
+ * @brief SD HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SD_Exported_Types SD Exported Types
+ * @{
+ */
+
+/** @defgroup SD_Exported_Types_Group1 SD Handle Structure definition
+ * @{
+ */
+#define SD_InitTypeDef SDIO_InitTypeDef
+#define SD_TypeDef SDIO_TypeDef
+
+typedef struct
+{
+ SD_TypeDef *Instance; /*!< SDIO register base address */
+
+ SD_InitTypeDef Init; /*!< SD required parameters */
+
+ HAL_LockTypeDef Lock; /*!< SD locking object */
+
+ uint32_t CardType; /*!< SD card type */
+
+ uint32_t RCA; /*!< SD relative card address */
+
+ uint32_t CSD[4]; /*!< SD card specific data table */
+
+ uint32_t CID[4]; /*!< SD card identification number table */
+
+ __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */
+
+ __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */
+
+ __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */
+
+ __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
+
+}SD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group2 Card Specific Data: CSD Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t CSDStruct; /*!< CSD structure */
+ __IO uint8_t SysSpecVersion; /*!< System specification version */
+ __IO uint8_t Reserved1; /*!< Reserved */
+ __IO uint8_t TAAC; /*!< Data read access time 1 */
+ __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
+ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
+ __IO uint16_t CardComdClasses; /*!< Card command classes */
+ __IO uint8_t RdBlockLen; /*!< Max. read data block length */
+ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
+ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
+ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
+ __IO uint8_t DSRImpl; /*!< DSR implemented */
+ __IO uint8_t Reserved2; /*!< Reserved */
+ __IO uint32_t DeviceSize; /*!< Device Size */
+ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
+ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
+ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
+ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
+ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
+ __IO uint8_t EraseGrSize; /*!< Erase group size */
+ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
+ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
+ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
+ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
+ __IO uint8_t WrSpeedFact; /*!< Write speed factor */
+ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
+ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
+ __IO uint8_t Reserved3; /*!< Reserved */
+ __IO uint8_t ContentProtectAppli; /*!< Content protection application */
+ __IO uint8_t FileFormatGrouop; /*!< File format group */
+ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
+ __IO uint8_t PermWrProtect; /*!< Permanent write protection */
+ __IO uint8_t TempWrProtect; /*!< Temporary write protection */
+ __IO uint8_t FileFormat; /*!< File format */
+ __IO uint8_t ECC; /*!< ECC code */
+ __IO uint8_t CSD_CRC; /*!< CSD CRC */
+ __IO uint8_t Reserved4; /*!< Always 1 */
+
+}HAL_SD_CSDTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group3 Card Identification Data: CID Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
+ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
+ __IO uint32_t ProdName1; /*!< Product Name part1 */
+ __IO uint8_t ProdName2; /*!< Product Name part2 */
+ __IO uint8_t ProdRev; /*!< Product Revision */
+ __IO uint32_t ProdSN; /*!< Product Serial Number */
+ __IO uint8_t Reserved1; /*!< Reserved1 */
+ __IO uint16_t ManufactDate; /*!< Manufacturing Date */
+ __IO uint8_t CID_CRC; /*!< CID CRC */
+ __IO uint8_t Reserved2; /*!< Always 1 */
+
+}HAL_SD_CIDTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group4 SD Card Status returned by ACMD13
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */
+ __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */
+ __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */
+ __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */
+ __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */
+ __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */
+ __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */
+ __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */
+ __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */
+ __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */
+
+}HAL_SD_CardStatusTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group5 SD Card information structure
+ * @{
+ */
+typedef struct
+{
+ HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */
+ HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */
+ uint64_t CardCapacity; /*!< Card capacity */
+ uint32_t CardBlockSize; /*!< Card block size */
+ uint16_t RCA; /*!< SD relative card address */
+ uint8_t CardType; /*!< SD card type */
+
+}HAL_SD_CardInfoTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group6 SD Error status enumeration Structure definition
+ * @{
+ */
+typedef enum
+{
+/**
+ * @brief SD specific error defines
+ */
+ SD_CMD_CRC_FAIL = (1U), /*!< Command response received (but CRC check failed) */
+ SD_DATA_CRC_FAIL = (2U), /*!< Data block sent/received (CRC check failed) */
+ SD_CMD_RSP_TIMEOUT = (3U), /*!< Command response timeout */
+ SD_DATA_TIMEOUT = (4U), /*!< Data timeout */
+ SD_TX_UNDERRUN = (5U), /*!< Transmit FIFO underrun */
+ SD_RX_OVERRUN = (6U), /*!< Receive FIFO overrun */
+ SD_START_BIT_ERR = (7U), /*!< Start bit not detected on all data signals in wide bus mode */
+ SD_CMD_OUT_OF_RANGE = (8U), /*!< Command's argument was out of range. */
+ SD_ADDR_MISALIGNED = (9U), /*!< Misaligned address */
+ SD_BLOCK_LEN_ERR = (10U), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
+ SD_ERASE_SEQ_ERR = (11U), /*!< An error in the sequence of erase command occurs. */
+ SD_BAD_ERASE_PARAM = (12U), /*!< An invalid selection for erase groups */
+ SD_WRITE_PROT_VIOLATION = (13U), /*!< Attempt to program a write protect block */
+ SD_LOCK_UNLOCK_FAILED = (14U), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
+ SD_COM_CRC_FAILED = (15U), /*!< CRC check of the previous command failed */
+ SD_ILLEGAL_CMD = (16U), /*!< Command is not legal for the card state */
+ SD_CARD_ECC_FAILED = (17U), /*!< Card internal ECC was applied but failed to correct the data */
+ SD_CC_ERROR = (18U), /*!< Internal card controller error */
+ SD_GENERAL_UNKNOWN_ERROR = (19U), /*!< General or unknown error */
+ SD_STREAM_READ_UNDERRUN = (20U), /*!< The card could not sustain data transfer in stream read operation. */
+ SD_STREAM_WRITE_OVERRUN = (21U), /*!< The card could not sustain data programming in stream mode */
+ SD_CID_CSD_OVERWRITE = (22U), /*!< CID/CSD overwrite error */
+ SD_WP_ERASE_SKIP = (23U), /*!< Only partial address space was erased */
+ SD_CARD_ECC_DISABLED = (24U), /*!< Command has been executed without using internal ECC */
+ SD_ERASE_RESET = (25U), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
+ SD_AKE_SEQ_ERROR = (26U), /*!< Error in sequence of authentication. */
+ SD_INVALID_VOLTRANGE = (27U),
+ SD_ADDR_OUT_OF_RANGE = (28U),
+ SD_SWITCH_ERROR = (29U),
+ SD_SDIO_DISABLED = (30U),
+ SD_SDIO_FUNCTION_BUSY = (31U),
+ SD_SDIO_FUNCTION_FAILED = (32U),
+ SD_SDIO_UNKNOWN_FUNCTION = (33U),
+
+/**
+ * @brief Standard error defines
+ */
+ SD_INTERNAL_ERROR = (34U),
+ SD_NOT_CONFIGURED = (35U),
+ SD_REQUEST_PENDING = (36U),
+ SD_REQUEST_NOT_APPLICABLE = (37U),
+ SD_INVALID_PARAMETER = (38U),
+ SD_UNSUPPORTED_FEATURE = (39U),
+ SD_UNSUPPORTED_HW = (40U),
+ SD_ERROR = (41U),
+ SD_OK = (0U)
+
+}HAL_SD_ErrorTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group7 SD Transfer state enumeration structure
+ * @{
+ */
+typedef enum
+{
+ SD_TRANSFER_OK = 0U, /*!< Transfer success */
+ SD_TRANSFER_BUSY = 1U, /*!< Transfer is occurring */
+ SD_TRANSFER_ERROR = 2U /*!< Transfer failed */
+
+}HAL_SD_TransferStateTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group8 SD Card State enumeration structure
+ * @{
+ */
+typedef enum
+{
+ SD_CARD_READY = ((uint32_t)0x00000001U), /*!< Card state is ready */
+ SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002U), /*!< Card is in identification state */
+ SD_CARD_STANDBY = ((uint32_t)0x00000003U), /*!< Card is in standby state */
+ SD_CARD_TRANSFER = ((uint32_t)0x00000004U), /*!< Card is in transfer state */
+ SD_CARD_SENDING = ((uint32_t)0x00000005U), /*!< Card is sending an operation */
+ SD_CARD_RECEIVING = ((uint32_t)0x00000006U), /*!< Card is receiving operation information */
+ SD_CARD_PROGRAMMING = ((uint32_t)0x00000007U), /*!< Card is in programming state */
+ SD_CARD_DISCONNECTED = ((uint32_t)0x00000008U), /*!< Card is disconnected */
+ SD_CARD_ERROR = ((uint32_t)0x000000FFU) /*!< Card is in error state */
+
+}HAL_SD_CardStateTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group9 SD Operation enumeration structure
+ * @{
+ */
+typedef enum
+{
+ SD_READ_SINGLE_BLOCK = 0U, /*!< Read single block operation */
+ SD_READ_MULTIPLE_BLOCK = 1U, /*!< Read multiple blocks operation */
+ SD_WRITE_SINGLE_BLOCK = 2U, /*!< Write single block operation */
+ SD_WRITE_MULTIPLE_BLOCK = 3U /*!< Write multiple blocks operation */
+
+}HAL_SD_OperationTypedef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SD_Exported_Constants SD Exported Constants
+ * @{
+ */
+
+/**
+ * @brief SD Commands Index
+ */
+#define SD_CMD_GO_IDLE_STATE ((uint8_t)0U) /*!< Resets the SD memory card. */
+#define SD_CMD_SEND_OP_COND ((uint8_t)1U) /*!< Sends host capacity support information and activates the card's initialization process. */
+#define SD_CMD_ALL_SEND_CID ((uint8_t)2U) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
+#define SD_CMD_SET_REL_ADDR ((uint8_t)3U) /*!< Asks the card to publish a new relative address (RCA). */
+#define SD_CMD_SET_DSR ((uint8_t)4U) /*!< Programs the DSR of all cards. */
+#define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5U) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
+ operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_HS_SWITCH ((uint8_t)6U) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
+#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7U) /*!< Selects the card by its own relative address and gets deselected by any other address */
+#define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8U) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
+ and asks the card whether card supports voltage. */
+#define SD_CMD_SEND_CSD ((uint8_t)9U) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
+#define SD_CMD_SEND_CID ((uint8_t)10U) /*!< Addressed card sends its card identification (CID) on the CMD line. */
+#define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11U) /*!< SD card doesn't support it. */
+#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12U) /*!< Forces the card to stop transmission. */
+#define SD_CMD_SEND_STATUS ((uint8_t)13U) /*!< Addressed card sends its status register. */
+#define SD_CMD_HS_BUSTEST_READ ((uint8_t)14U)
+#define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15U) /*!< Sends an addressed card into the inactive state. */
+#define SD_CMD_SET_BLOCKLEN ((uint8_t)16U) /*!< Sets the block length (in bytes for SDSC) for all following block commands
+ (read, write, lock). Default block length is fixed to 512 Bytes. Not effective
+ for SDHS and SDXC. */
+#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17U) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18U) /*!< Continuously transfers data blocks from card to host until interrupted by
+ STOP_TRANSMISSION command. */
+#define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19U) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
+#define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20U) /*!< Speed class control command. */
+#define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23U) /*!< Specify block count for CMD18 and CMD25. */
+#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24U) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25U) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
+#define SD_CMD_PROG_CID ((uint8_t)26U) /*!< Reserved for manufacturers. */
+#define SD_CMD_PROG_CSD ((uint8_t)27U) /*!< Programming of the programmable bits of the CSD. */
+#define SD_CMD_SET_WRITE_PROT ((uint8_t)28U) /*!< Sets the write protection bit of the addressed group. */
+#define SD_CMD_CLR_WRITE_PROT ((uint8_t)29U) /*!< Clears the write protection bit of the addressed group. */
+#define SD_CMD_SEND_WRITE_PROT ((uint8_t)30U) /*!< Asks the card to send the status of the write protection bits. */
+#define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32U) /*!< Sets the address of the first write block to be erased. (For SD card only). */
+#define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33U) /*!< Sets the address of the last write block of the continuous range to be erased. */
+#define SD_CMD_ERASE_GRP_START ((uint8_t)35U) /*!< Sets the address of the first write block to be erased. Reserved for each command
+ system set by switch function command (CMD6). */
+#define SD_CMD_ERASE_GRP_END ((uint8_t)36U) /*!< Sets the address of the last write block of the continuous range to be erased.
+ Reserved for each command system set by switch function command (CMD6). */
+#define SD_CMD_ERASE ((uint8_t)38U) /*!< Reserved for SD security applications. */
+#define SD_CMD_FAST_IO ((uint8_t)39U) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_GO_IRQ_STATE ((uint8_t)40U) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_LOCK_UNLOCK ((uint8_t)42U) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
+ the SET_BLOCK_LEN command. */
+#define SD_CMD_APP_CMD ((uint8_t)55U) /*!< Indicates to the card that the next command is an application specific command rather
+ than a standard command. */
+#define SD_CMD_GEN_CMD ((uint8_t)56U) /*!< Used either to transfer a data block to the card or to get a data block from the card
+ for general purpose/application specific commands. */
+#define SD_CMD_NO_CMD ((uint8_t)64U)
+
+/**
+ * @brief Following commands are SD Card Specific commands.
+ * SDIO_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6U) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
+ widths are given in SCR register. */
+#define SD_CMD_SD_APP_STATUS ((uint8_t)13U) /*!< (ACMD13) Sends the SD status. */
+#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22U) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
+ 32bit+CRC data block. */
+#define SD_CMD_SD_APP_OP_COND ((uint8_t)41U) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
+ send its operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42U) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */
+#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51U) /*!< Reads the SD Configuration Register (SCR). */
+#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52U) /*!< For SD I/O card only, reserved for security specification. */
+#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53U) /*!< For SD I/O card only, reserved for security specification. */
+
+/**
+ * @brief Following commands are SD Card Specific security commands.
+ * SD_CMD_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_SD_APP_GET_MKB ((uint8_t)43U) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_MID ((uint8_t)44U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45U) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47U) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38U) /*!< For SD card only */
+#define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48U) /*!< For SD card only */
+
+/**
+ * @brief Supported SD Memory Cards
+ */
+#define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000U)
+#define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001U)
+#define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002U)
+#define MULTIMEDIA_CARD ((uint32_t)0x00000003U)
+#define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004U)
+#define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005U)
+#define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006U)
+#define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007U)
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SD_Exported_macros SD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE()
+
+/**
+ * @brief Disable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE()
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE()
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE()
+
+/**
+ * @brief Enable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Disable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified SD flag is set or not.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SD FLAG (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Clear the SD's pending flags.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Check whether the specified SD interrupt has occurred or not.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SD IT (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__)
+
+/**
+ * @brief Clear the SD's interrupt pending bits.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SD_Exported_Functions SD Exported Functions
+ * @{
+ */
+
+/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
+HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group2 I/O operation functions
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
+
+/* Non-Blocking mode: DMA */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo);
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode);
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd);
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @defgroup SD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus);
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup SD_Private_Types SD Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SD_Private_Defines SD Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup SD_Private_Variables SD Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SD_Private_Constants SD Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SD_Private_Macros SD Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SD_Private_Functions SD Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,853 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sdram.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SDRAM HAL module driver.
+ * This file provides a generic firmware to drive SDRAM memories mounted
+ * as external device.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control SDRAM memories. It uses the FMC layer functions to interface
+ with SDRAM devices.
+ The following sequence should be followed to configure the FMC to interface
+ with SDRAM memories:
+
+ (#) Declare a SDRAM_HandleTypeDef handle structure, for example:
+ SDRAM_HandleTypeDef hdsram
+
+ (++) Fill the SDRAM_HandleTypeDef handle "Init" field with the allowed
+ values of the structure member.
+
+ (++) Fill the SDRAM_HandleTypeDef handle "Instance" field with a predefined
+ base register instance for NOR or SDRAM device
+
+ (#) Declare a FMC_SDRAM_TimingTypeDef structure; for example:
+ FMC_SDRAM_TimingTypeDef Timing;
+ and fill its fields with the allowed values of the structure member.
+
+ (#) Initialize the SDRAM Controller by calling the function HAL_SDRAM_Init(). This function
+ performs the following sequence:
+
+ (##) MSP hardware layer configuration using the function HAL_SDRAM_MspInit()
+ (##) Control register configuration using the FMC SDRAM interface function
+ FMC_SDRAM_Init()
+ (##) Timing register configuration using the FMC SDRAM interface function
+ FMC_SDRAM_Timing_Init()
+ (##) Program the SDRAM external device by applying its initialization sequence
+ according to the device plugged in your hardware. This step is mandatory
+ for accessing the SDRAM device.
+
+ (#) At this stage you can perform read/write accesses from/to the memory connected
+ to the SDRAM Bank. You can perform either polling or DMA transfer using the
+ following APIs:
+ (++) HAL_SDRAM_Read()/HAL_SDRAM_Write() for polling read/write access
+ (++) HAL_SDRAM_Read_DMA()/HAL_SDRAM_Write_DMA() for DMA read/write transfer
+
+ (#) You can also control the SDRAM device by calling the control APIs HAL_SDRAM_WriteOperation_Enable()/
+ HAL_SDRAM_WriteOperation_Disable() to respectively enable/disable the SDRAM write operation or
+ the function HAL_SDRAM_SendCommand() to send a specified command to the SDRAM
+ device. The command to be sent must be configured with the FMC_SDRAM_CommandTypeDef
+ structure.
+
+ (#) You can continuously monitor the SDRAM device HAL state by calling the function
+ HAL_SDRAM_GetState()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SDRAM SDRAM
+ * @brief SDRAM driver modules
+ * @{
+ */
+#ifdef HAL_SDRAM_MODULE_ENABLED
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Functions SDRAM Exported Functions
+ * @{
+ */
+
+/** @defgroup SDRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SDRAM Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize
+ the SDRAM memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Performs the SDRAM device initialization sequence.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param Timing: Pointer to SDRAM control timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing)
+{
+ /* Check the SDRAM handle parameter */
+ if(hsdram == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsdram->State == HAL_SDRAM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hsdram->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_SDRAM_MspInit(hsdram);
+ }
+
+ /* Initialize the SDRAM controller state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Initialize SDRAM control Interface */
+ FMC_SDRAM_Init(hsdram->Instance, &(hsdram->Init));
+
+ /* Initialize SDRAM timing Interface */
+ FMC_SDRAM_Timing_Init(hsdram->Instance, Timing, hsdram->Init.SDBank);
+
+ /* Update the SDRAM controller state */
+ hsdram->State = HAL_SDRAM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Perform the SDRAM device initialization sequence.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Initialize the low level hardware (MSP) */
+ HAL_SDRAM_MspDeInit(hsdram);
+
+ /* Configure the SDRAM registers with their reset values */
+ FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank);
+
+ /* Reset the SDRAM controller state */
+ hsdram->State = HAL_SDRAM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SDRAM MSP Init.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval None
+ */
+__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsdram);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SDRAM MSP DeInit.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval None
+ */
+__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsdram);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles SDRAM refresh error interrupt request.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL status
+*/
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Check SDRAM interrupt Rising edge flag */
+ if(__FMC_SDRAM_GET_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_IT))
+ {
+ /* SDRAM refresh error interrupt callback */
+ HAL_SDRAM_RefreshErrorCallback(hsdram);
+
+ /* Clear SDRAM refresh error interrupt pending bit */
+ __FMC_SDRAM_CLEAR_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_ERROR);
+ }
+}
+
+/**
+ * @brief SDRAM Refresh error callback.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval None
+ */
+__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsdram);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_RefreshErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_DMA_XferCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA transfer complete error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+__weak void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_DMA_XferErrorCallback could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup SDRAM_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SDRAM Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the SDRAM memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads 8-bit data buffer from the SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Read data from source */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint8_t *)pSdramAddress;
+ pDstBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 8-bit data buffer to SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint8_t *)pSdramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads 16-bit data buffer from the SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Read data from source */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint16_t *)pSdramAddress;
+ pDstBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 16-bit data buffer to SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint16_t *)pSdramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads 32-bit data buffer from the SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Read data from source */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint32_t *)pSdramAddress;
+ pDstBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 32-bit data buffer to SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint32_t *)pSdramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads a Words data from the SDRAM memory using DMA transfer.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if(tmp == HAL_SDRAM_STATE_PRECHARGED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Configure DMA user callbacks */
+ hsdram->hdma->XferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback;
+ hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes a Words data buffer to SDRAM memory using DMA transfer.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Configure DMA user callbacks */
+ hsdram->hdma->XferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback;
+ hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup SDRAM_Exported_Functions_Group3 Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### SDRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the SDRAM interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically SDRAM write protection.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Enable write protection */
+ FMC_SDRAM_WriteProtection_Enable(hsdram->Instance, hsdram->Init.SDBank);
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically SDRAM write protection.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Disable write protection */
+ FMC_SDRAM_WriteProtection_Disable(hsdram->Instance, hsdram->Init.SDBank);
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sends Command to the SDRAM bank.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param Command: SDRAM command structure
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Send SDRAM command */
+ FMC_SDRAM_SendCommand(hsdram->Instance, Command, Timeout);
+
+ /* Update the SDRAM controller state */
+ if(Command->CommandMode == FMC_SDRAM_CMD_PALL)
+ {
+ hsdram->State = HAL_SDRAM_STATE_PRECHARGED;
+ }
+ else
+ {
+ hsdram->State = HAL_SDRAM_STATE_READY;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Programs the SDRAM Memory Refresh rate.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param RefreshRate: The SDRAM refresh rate value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Program the refresh rate */
+ FMC_SDRAM_ProgramRefreshRate(hsdram->Instance ,RefreshRate);
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets the Number of consecutive SDRAM Memory auto Refresh commands.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param AutoRefreshNumber: The SDRAM auto Refresh number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Set the Auto-Refresh number */
+ FMC_SDRAM_SetAutoRefreshNumber(hsdram->Instance ,AutoRefreshNumber);
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the SDRAM memory current mode.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval The SDRAM memory mode.
+ */
+uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Return the SDRAM memory current mode */
+ return(FMC_SDRAM_GetModeStatus(hsdram->Instance, hsdram->Init.SDBank));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SDRAM_Exported_Functions_Group4 State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### SDRAM State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the SDRAM controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the SDRAM state.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL state
+ */
+HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram)
+{
+ return hsdram->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,197 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sdram.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SDRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SDRAM_H
+#define __STM32F4xx_HAL_SDRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_fmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SDRAM
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Types SDRAM Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL SDRAM State structure definition
+ */
+typedef enum
+{
+ HAL_SDRAM_STATE_RESET = 0x00U, /*!< SDRAM not yet initialized or disabled */
+ HAL_SDRAM_STATE_READY = 0x01U, /*!< SDRAM initialized and ready for use */
+ HAL_SDRAM_STATE_BUSY = 0x02U, /*!< SDRAM internal process is ongoing */
+ HAL_SDRAM_STATE_ERROR = 0x03U, /*!< SDRAM error state */
+ HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04U, /*!< SDRAM device write protected */
+ HAL_SDRAM_STATE_PRECHARGED = 0x05U /*!< SDRAM device precharged */
+
+}HAL_SDRAM_StateTypeDef;
+
+/**
+ * @brief SDRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_SDRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */
+
+ __IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */
+
+ HAL_LockTypeDef Lock; /*!< SDRAM locking object */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SDRAM_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros
+ * @{
+ */
+
+/** @brief Reset SDRAM handle state
+ * @param __HANDLE__: specifies the SDRAM handle.
+ * @retval None
+ */
+#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions
+ * @{
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
+
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t * pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+/**
+ * @}
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group3
+ * @{
+ */
+/* SDRAM Control functions *****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate);
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber);
+uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram);
+/**
+ * @}
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group4
+ * @{
+ */
+/* SDRAM State functions ********************************************************/
+HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SDRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1333 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_smartcard.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SMARTCARD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the SMARTCARD peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The SMARTCARD HAL driver can be used as follows:
+
+ (#) Declare a SMARTCARD_HandleTypeDef handle structure.
+ (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API:
+ (##) Enable the USARTx interface clock.
+ (##) SMARTCARD pins configuration:
+ (+++) Enable the clock for the SMARTCARD GPIOs.
+ (+++) Configure these SMARTCARD pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
+ and HAL_SMARTCARD_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
+ and HAL_SMARTCARD_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+ (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware
+ flow control and Mode(Receiver/Transmitter) in the SMARTCARD Init structure.
+
+ (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API:
+ (++) These APIs configure also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customized HAL_SMARTCARD_MspInit() API.
+ [..]
+ (@) The specific SMARTCARD interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
+
+ [..]
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_SMARTCARD_Transmit_IT()
+ (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_SMARTCARD_Receive_IT()
+ (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
+ (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA()
+ (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA()
+ (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
+ (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
+
+ *** SMARTCARD HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in SMARTCARD HAL driver.
+
+ (+) __HAL_SMARTCARD_ENABLE: Enable the SMARTCARD peripheral
+ (+) __HAL_SMARTCARD_DISABLE: Disable the SMARTCARD peripheral
+ (+) __HAL_SMARTCARD_GET_FLAG : Check whether the specified SMARTCARD flag is set or not
+ (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
+ (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
+ (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
+
+ [..]
+ (@) You can refer to the SMARTCARD HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SMARTCARD SMARTCARD
+ * @brief HAL USART SMARTCARD module driver
+ * @{
+ */
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Private_Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SMARTCARD_Private_Functions
+ * @{
+ */
+static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsc);
+static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsc);
+static void SMARTCARD_SetConfig (SMARTCARD_HandleTypeDef *hsc);
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc);
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc);
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group1 SmartCard Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USART
+ in Smartcard mode.
+ [..]
+ The Smartcard interface is designed to support asynchronous protocol Smartcards as
+ defined in the ISO 7816-3 standard.
+ [..]
+ The USART can provide a clock to the smartcard through the SCLK output.
+ In smartcard mode, SCLK is not associated to the communication but is simply derived
+ from the internal peripheral input clock through a 5-bit prescaler.
+ [..]
+ (+) For the Smartcard mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length => Should be 9 bits (8 bits + parity)
+ (++) Stop Bit
+ (++) Parity: => Should be enabled
+
+ (+++) +-------------------------------------------------------------+
+ (+++) | M bit | PCE bit | SMARTCARD frame |
+ (+++) |---------------------|---------------------------------------|
+ (+++) | 1 | 1 | | SB | 8 bit data | PB | STB | |
+ (+++) +-------------------------------------------------------------+
+
+ (++) USART polarity
+ (++) USART phase
+ (++) USART LastBit
+ (++) Receiver/transmitter modes
+ (++) Prescaler
+ (++) GuardTime
+ (++) NACKState: The Smartcard NACK state
+
+ (+) Recommended SmartCard interface configuration to get the Answer to Reset from the Card:
+ (++) Word Length = 9 Bits
+ (++) 1.5 Stop Bit
+ (++) Even parity
+ (++) BaudRate = 12096 baud
+ (++) Tx and Rx enabled
+ [..]
+ Please refer to the ISO 7816-3 specification for more details.
+
+ -@- It is also possible to choose 0.5 stop bit for receiving but it is recommended
+ to use 1.5 stop bits for both transmitting and receiving to avoid switching
+ between the two configurations.
+ [..]
+ The HAL_SMARTCARD_Init() function follows the USART SmartCard configuration
+ procedure (details for the procedure are available in reference manual (RM0329)).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SmartCard mode according to the specified
+ * parameters in the SMARTCARD_InitTypeDef and create the associated handle .
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Check the SMARTCARD handle allocation */
+ if(hsc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+ assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));
+
+ if(hsc->gState == HAL_SMARTCARD_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hsc->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_SMARTCARD_MspInit(hsc);
+ }
+
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY;
+
+ /* Set the Prescaler */
+ MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_PSC, hsc->Init.Prescaler);
+
+ /* Set the Guard Time */
+ MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_GT, ((hsc->Init.GuardTime)<<8));
+
+ /* Set the Smartcard Communication parameters */
+ SMARTCARD_SetConfig(hsc);
+
+ /* In SmartCard mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register
+ - HDSEL and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(hsc->Instance->CR2, USART_CR2_LINEN);
+ CLEAR_BIT(hsc->Instance->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
+
+ /* Enable the SMARTCARD Parity Error Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the SMARTCARD Framing Error Interrupt */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the Peripheral */
+ __HAL_SMARTCARD_ENABLE(hsc);
+
+ /* Configure the Smartcard NACK state */
+ MODIFY_REG(hsc->Instance->CR3, USART_CR3_NACK, hsc->Init.NACKState);
+
+ /* Enable the SC mode by setting the SCEN bit in the CR3 register */
+ hsc->Instance->CR3 |= (USART_CR3_SCEN);
+
+ /* Initialize the SMARTCARD state*/
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState= HAL_SMARTCARD_STATE_READY;
+ hsc->RxState= HAL_SMARTCARD_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the USART SmartCard peripheral
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Check the SMARTCARD handle allocation */
+ if(hsc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_SMARTCARD_DISABLE(hsc);
+
+ /* DeInit the low level hardware */
+ HAL_SMARTCARD_MspDeInit(hsc);
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState = HAL_SMARTCARD_STATE_RESET;
+ hsc->RxState = HAL_SMARTCARD_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SMARTCARD MSP Init
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SMARTCARD MSP DeInit
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions
+ * @brief SMARTCARD Transmit and Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
+ [..]
+ Smartcard is a single wire half duplex communication protocol.
+ The Smartcard interface is designed to support asynchronous protocol Smartcards as
+ defined in the ISO 7816-3 standard. The USART should be configured as:
+ (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
+ (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) Non Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
+ will be executed respectively at the end of the Transmit or Receive process
+ The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication error is detected
+
+ (#) Blocking mode APIs are :
+ (++) HAL_SMARTCARD_Transmit()
+ (++) HAL_SMARTCARD_Receive()
+
+ (#) Non Blocking mode APIs with Interrupt are :
+ (++) HAL_SMARTCARD_Transmit_IT()
+ (++) HAL_SMARTCARD_Receive_IT()
+ (++) HAL_SMARTCARD_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_SMARTCARD_Transmit_DMA()
+ (++) HAL_SMARTCARD_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_SMARTCARD_TxCpltCallback()
+ (++) HAL_SMARTCARD_RxCpltCallback()
+ (++) HAL_SMARTCARD_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send an amount of data in blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(hsc->gState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY_TX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ hsc->TxXferSize = Size;
+ hsc->TxXferCount = Size;
+ while(hsc->TxXferCount > 0U)
+ {
+ hsc->TxXferCount--;
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ hsc->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ pData +=1U;
+ }
+
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* At end of Tx process, restore hsc->gState to Ready */
+ hsc->gState = HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(hsc->RxState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ hsc->RxXferSize = Size;
+ hsc->RxXferCount = Size;
+
+ /* Check the remain data to be received */
+ while(hsc->RxXferCount > 0U)
+ {
+ hsc->RxXferCount--;
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ *tmp = (uint8_t)(hsc->Instance->DR & (uint8_t)0xFFU);
+ pData +=1U;
+ }
+
+ /* At end of Rx process, restore hsc->RxState to Ready */
+ hsc->RxState = HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Tx process is not already ongoing */
+ if(hsc->gState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->pTxBuffPtr = pData;
+ hsc->TxXferSize = Size;
+ hsc->TxXferCount = Size;
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ /* Enable the SMARTCARD Parity Error Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the SMARTCARD Transmit data register empty Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Rx process is not already ongoing */
+ if(hsc->RxState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->pRxBuffPtr = pData;
+ hsc->RxXferSize = Size;
+ hsc->RxXferCount = Size;
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ /* Enable the SMARTCARD Data Register not empty Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Enable the SMARTCARD Parity Error Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Tx process is not already ongoing */
+ if(hsc->gState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->pTxBuffPtr = pData;
+ hsc->TxXferSize = Size;
+ hsc->TxXferCount = Size;
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY_TX;
+
+ /* Set the SMARTCARD DMA transfer complete callback */
+ hsc->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
+
+ /* Set the DMA error callback */
+ hsc->hdmatx->XferErrorCallback = SMARTCARD_DMAError;
+
+ /* Set the DMA abort callback */
+ hsc->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the SMARTCARD transmit DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hsc->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsc->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_SMARTCARD_CLEAR_FLAG(hsc, SMARTCARD_FLAG_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the SMARTCARD CR3 register */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @note When the SMARTCARD parity is enabled (PCE = 1) the data received contain the parity bit.s
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Rx process is not already ongoing */
+ if(hsc->RxState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->pRxBuffPtr = pData;
+ hsc->RxXferSize = Size;
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
+
+ /* Set the SMARTCARD DMA transfer complete callback */
+ hsc->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
+
+ /* Set the DMA error callback */
+ hsc->hdmarx->XferErrorCallback = SMARTCARD_DMAError;
+
+ /* Set the DMA abort callback */
+ hsc->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hsc->hdmarx, (uint32_t)&hsc->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ /* Enable the SMARTCARD Parity Error Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the SMARTCARD CR3 register */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_DMAR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles SMARTCARD interrupt request.
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint32_t isrflags = READ_REG(hsc->Instance->SR);
+ uint32_t cr1its = READ_REG(hsc->Instance->CR1);
+ uint32_t cr3its = READ_REG(hsc->Instance->CR3);
+ uint32_t dmarequest = 0x00U;
+ uint32_t errorflags = 0x00U;
+
+ /* If no error occurs */
+ errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE));
+ if(errorflags == RESET)
+ {
+ /* SMARTCARD in mode Receiver -------------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ SMARTCARD_Receive_IT(hsc);
+ return;
+ }
+ }
+
+ /* If some errors occur */
+ if((errorflags != RESET) && ((cr3its & (USART_CR3_EIE | USART_CR1_PEIE)) != RESET))
+ {
+ /* SMARTCARD parity error interrupt occurred ---------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+ {
+ hsc->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
+ }
+
+ /* SMARTCARD frame error interrupt occurred ----------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hsc->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
+ }
+
+ /* SMARTCARD noise error interrupt occurred ----------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hsc->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
+ }
+
+ /* SMARTCARD Over-Run interrupt occurred -------------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hsc->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
+ }
+ /* Call the Error call Back in case of Errors */
+ if(hsc->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
+ {
+ /* SMARTCARD in mode Receiver -----------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ SMARTCARD_Receive_IT(hsc);
+ }
+
+ /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+ consider error as blocking */
+ dmarequest = HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAR);
+ if(((hsc->ErrorCode & HAL_SMARTCARD_ERROR_ORE) != RESET) || dmarequest)
+ {
+ /* Blocking error : transfer is aborted
+ Set the SMARTCARD state ready to be able to start again the process,
+ Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+ SMARTCARD_EndRxTransfer(hsc);
+ /* Disable the SMARTCARD DMA Rx request if enabled */
+ if(HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAR))
+ {
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the SMARTCARD DMA Rx channel */
+ if(hsc->hdmarx != NULL)
+ {
+ /* Set the SMARTCARD DMA Abort callback :
+ will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */
+ hsc->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError;
+
+ if(HAL_DMA_Abort_IT(hsc->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hsc->hdmarx->XferAbortCallback(hsc->hdmarx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_SMARTCARD_ErrorCallback(hsc);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_SMARTCARD_ErrorCallback(hsc);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_SMARTCARD_ErrorCallback(hsc);
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ }
+ }
+ return;
+ } /* End if some error occurs */
+
+ /* SMARTCARD in mode Transmitter -------------------------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+ {
+ SMARTCARD_Transmit_IT(hsc);
+ return;
+ }
+
+ /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+ {
+ SMARTCARD_EndTransmit_IT(hsc);
+ return;
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SMARTCARD error callbacks
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief SMARTCARD State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SmartCard.
+ (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state of the SmartCard peripheral.
+ (+) HAL_SMARTCARD_GetError() check in run-time errors that could be occurred during communication.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the SMARTCARD state
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL state
+ */
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint32_t temp1= 0x00U, temp2 = 0x00U;
+ temp1 = hsc->gState;
+ temp2 = hsc->RxState;
+
+ return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+ * @brief Return the SMARTCARD error code
+ * @param hsc : pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for the specified SMARTCARD.
+ * @retval SMARTCARD Error Code
+ */
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc)
+{
+ return hsc->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA SMARTCARD transmit process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ hsc->TxXferCount = 0U;
+
+ /* Disable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAT);
+
+ /* Enable the SMARTCARD Transmit Complete Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_TCIE);
+}
+
+/**
+ * @brief DMA SMARTCARD receive process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ hsc->RxXferCount = 0U;
+
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hsc->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAR);
+
+ /* At end of Rx process, restore hsc->RxState to Ready */
+ hsc->RxState = HAL_SMARTCARD_STATE_READY;
+
+ HAL_SMARTCARD_RxCpltCallback(hsc);
+}
+
+/**
+ * @brief DMA SMARTCARD communication error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)
+{
+ uint32_t dmarequest = 0x00U;
+ SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hsc->RxXferCount = 0U;
+ hsc->TxXferCount = 0U;
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
+
+ /* Stop SMARTCARD DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAT);
+ if((hsc->gState == HAL_SMARTCARD_STATE_BUSY_TX) && dmarequest)
+ {
+ SMARTCARD_EndTxTransfer(hsc);
+ }
+
+ /* Stop SMARTCARD DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAR);
+ if((hsc->RxState == HAL_SMARTCARD_STATE_BUSY_RX) && dmarequest)
+ {
+ SMARTCARD_EndRxTransfer(hsc);
+ }
+
+ HAL_SMARTCARD_ErrorCallback(hsc);
+}
+
+/**
+ * @brief This function handles SMARTCARD Communication Timeout.
+ * @param hsc: SMARTCARD handle
+ * @param Flag: specifies the SMARTCARD flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Timeout: Timeout duration
+ * @param Tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is set */
+ while((__HAL_SMARTCARD_GET_FLAG(hsc, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ /* Disable TXE and RXNE interrupts for the interrupt process */
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_TXEIE);
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_RXNEIE);
+
+ hsc->gState= HAL_SMARTCARD_STATE_READY;
+ hsc->RxState= HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion).
+ * @param hsc: SMARTCARD handle.
+ * @retval None
+ */
+static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* At end of Tx process, restore hsc->gState to Ready */
+ hsc->gState = HAL_SMARTCARD_STATE_READY;
+
+ /* Disable TXEIE and TCIE interrupts */
+ CLEAR_BIT(hsc->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+}
+
+
+/**
+ * @brief End ongoing Rx transfer on SMARTCARD peripheral (following error detection or Reception completion).
+ * @param hsc: SMARTCARD handle.
+ * @retval None
+ */
+static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* At end of Rx process, restore hsc->RxState to Ready */
+ hsc->RxState = HAL_SMARTCARD_STATE_READY;
+
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hsc->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+}
+
+/**
+ * @brief Send an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint16_t* tmp;
+
+ /* Check that a Tx process is ongoing */
+ if(hsc->gState == HAL_SMARTCARD_STATE_BUSY_TX)
+ {
+ tmp = (uint16_t*) hsc->pTxBuffPtr;
+ hsc->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ hsc->pTxBuffPtr += 1U;
+
+ if(--hsc->TxXferCount == 0U)
+ {
+ /* Disable the SMARTCARD Transmit data register empty Interrupt */
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Enable the SMARTCARD Transmit Complete Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_TCIE);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for the specified SMARTCARD module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* Disable the SMARTCARD Transmit Complete Interrupt */
+ CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TCIE);
+
+ /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+ /* Tx process is ended, restore hsmartcard->gState to Ready */
+ hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
+
+ HAL_SMARTCARD_TxCpltCallback(hsmartcard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receive an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint16_t* tmp;
+
+ /* Check that a Rx process is ongoing */
+ if(hsc->RxState == HAL_SMARTCARD_STATE_BUSY_RX)
+ {
+ tmp = (uint16_t*) hsc->pRxBuffPtr;
+ *tmp = (uint8_t)(hsc->Instance->DR & (uint8_t)0x00FFU);
+ hsc->pRxBuffPtr += 1U;
+
+ if(--hsc->RxXferCount == 0U)
+ {
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the SMARTCARD Parity Error Interrupt */
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Rx process is completed, restore hsc->RxState to Ready */
+ hsc->RxState = HAL_SMARTCARD_STATE_READY;
+
+ HAL_SMARTCARD_RxCpltCallback(hsc);
+
+ return HAL_OK;
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ SMARTCARD_HandleTypeDef* hsc = (SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hsc->RxXferCount = 0x00U;
+ hsc->TxXferCount = 0x00U;
+
+ HAL_SMARTCARD_ErrorCallback(hsc);
+}
+
+/**
+ * @brief Configure the SMARTCARD peripheral
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+ assert_param(IS_SMARTCARD_POLARITY(hsc->Init.CLKPolarity));
+ assert_param(IS_SMARTCARD_PHASE(hsc->Init.CLKPhase));
+ assert_param(IS_SMARTCARD_LASTBIT(hsc->Init.CLKLastBit));
+ assert_param(IS_SMARTCARD_BAUDRATE(hsc->Init.BaudRate));
+ assert_param(IS_SMARTCARD_WORD_LENGTH(hsc->Init.WordLength));
+ assert_param(IS_SMARTCARD_STOPBITS(hsc->Init.StopBits));
+ assert_param(IS_SMARTCARD_PARITY(hsc->Init.Parity));
+ assert_param(IS_SMARTCARD_MODE(hsc->Init.Mode));
+ assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));
+
+ /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the
+ receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */
+ CLEAR_BIT(hsc->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+
+ /*---------------------------- USART CR2 Configuration ---------------------*/
+ tmpreg = hsc->Instance->CR2;
+ /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL));
+ /* Configure the SMARTCARD Clock, CPOL, CPHA and LastBit -----------------------*/
+ /* Set CPOL bit according to hsc->Init.CLKPolarity value */
+ /* Set CPHA bit according to hsc->Init.CLKPhase value */
+ /* Set LBCL bit according to hsc->Init.CLKLastBit value */
+ /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
+ tmpreg |= (uint32_t)(USART_CR2_CLKEN | hsc->Init.CLKPolarity |
+ hsc->Init.CLKPhase| hsc->Init.CLKLastBit | hsc->Init.StopBits);
+ /* Write to USART CR2 */
+ WRITE_REG(hsc->Instance->CR2, (uint32_t)tmpreg);
+
+ tmpreg = hsc->Instance->CR2;
+
+ /* Clear STOP[13:12] bits */
+ tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);
+
+ /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
+ tmpreg |= (uint32_t)(hsc->Init.StopBits);
+
+ /* Write to USART CR2 */
+ WRITE_REG(hsc->Instance->CR2, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = hsc->Instance->CR1;
+
+ /* Clear M, PCE, PS, TE and RE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+ USART_CR1_RE));
+
+ /* Configure the SMARTCARD Word Length, Parity and mode:
+ Set the M bits according to hsc->Init.WordLength value
+ Set PCE and PS bits according to hsc->Init.Parity value
+ Set TE and RE bits according to hsc->Init.Mode value */
+ tmpreg |= (uint32_t)hsc->Init.WordLength | hsc->Init.Parity | hsc->Init.Mode;
+
+ /* Write to USART CR1 */
+ WRITE_REG(hsc->Instance->CR1, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* Clear CTSE and RTSE bits */
+ CLEAR_BIT(hsc->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE));
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ if((hsc->Instance == USART1) || (hsc->Instance == USART6))
+ {
+ hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK2Freq(), hsc->Init.BaudRate);
+ }
+ else
+ {
+ hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK1Freq(), hsc->Init.BaudRate);
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,677 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SMARTCARD_H
+#define __STM32F4xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+ * @{
+ */
+
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref SMARTCARD_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref SMARTCARD_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits).*/
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock
+ to provide the smartcard clock. The value given in the register (5 significant bits)
+ is multiplied by 2 to give the division factor of the source clock frequency.
+ This parameter can be a value of @ref SMARTCARD_Prescaler */
+
+ uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks */
+
+ uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state.
+ This parameter can be a value of @ref SMARTCARD_NACK_State */
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief HAL SMARTCARD State structures definition
+ * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains SMARTCARD state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+ HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
+ Value is allowed for gState only */
+ HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error
+ Value is allowed for gState only */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_SMARTCARD_StateTypeDef gState; /* SmartCard state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
+
+ __IO HAL_SMARTCARD_StateTypeDef RxState; /* SmartCard state information related to Rx operations.
+ This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /* SmartCard Error code */
+
+}SMARTCARD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants
+ * @{
+ */
+/** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code
+ * @brief SMARTCARD Error Code
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint32_t)0x00000000U)
+#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint32_t)0x00000000U)
+#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x00000000U)
+#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests
+ * @{
+ */
+#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT)
+#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler
+ * @{
+ */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV2 ((uint32_t)0x00000001U) /*!< SYSCLK divided by 2 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV4 ((uint32_t)0x00000002U) /*!< SYSCLK divided by 4 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV6 ((uint32_t)0x00000003U) /*!< SYSCLK divided by 6 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV8 ((uint32_t)0x00000004U) /*!< SYSCLK divided by 8 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV10 ((uint32_t)0x00000005U) /*!< SYSCLK divided by 10 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV12 ((uint32_t)0x00000006U) /*!< SYSCLK divided by 12 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV14 ((uint32_t)0x00000007U) /*!< SYSCLK divided by 14 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV16 ((uint32_t)0x00000008U) /*!< SYSCLK divided by 16 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV18 ((uint32_t)0x00000009U) /*!< SYSCLK divided by 18 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV20 ((uint32_t)0x0000000AU) /*!< SYSCLK divided by 20 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV22 ((uint32_t)0x0000000BU) /*!< SYSCLK divided by 22 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV24 ((uint32_t)0x0000000CU) /*!< SYSCLK divided by 24 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV26 ((uint32_t)0x0000000DU) /*!< SYSCLK divided by 26 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV28 ((uint32_t)0x0000000EU) /*!< SYSCLK divided by 28 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV30 ((uint32_t)0x0000000FU) /*!< SYSCLK divided by 30 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV32 ((uint32_t)0x00000010U) /*!< SYSCLK divided by 32 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV34 ((uint32_t)0x00000011U) /*!< SYSCLK divided by 34 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV36 ((uint32_t)0x00000012U) /*!< SYSCLK divided by 36 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV38 ((uint32_t)0x00000013U) /*!< SYSCLK divided by 38 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV40 ((uint32_t)0x00000014U) /*!< SYSCLK divided by 40 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV42 ((uint32_t)0x00000015U) /*!< SYSCLK divided by 42 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV44 ((uint32_t)0x00000016U) /*!< SYSCLK divided by 44 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV46 ((uint32_t)0x00000017U) /*!< SYSCLK divided by 46 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV48 ((uint32_t)0x00000018U) /*!< SYSCLK divided by 48 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV50 ((uint32_t)0x00000019U) /*!< SYSCLK divided by 50 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV52 ((uint32_t)0x0000001AU) /*!< SYSCLK divided by 52 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV54 ((uint32_t)0x0000001BU) /*!< SYSCLK divided by 54 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV56 ((uint32_t)0x0000001CU) /*!< SYSCLK divided by 56 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV58 ((uint32_t)0x0000001DU) /*!< SYSCLK divided by 58 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV60 ((uint32_t)0x0000001EU) /*!< SYSCLK divided by 60 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV62 ((uint32_t)0x0000001FU) /*!< SYSCLK divided by 62 */
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080U)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040U)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020U)
+#define SMARTCARD_FLAG_IDLE ((uint32_t)0x00000010U)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008U)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004U)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002U)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR3 register
+ * @{
+ */
+#define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+#define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMARTCARD handle gstate & RxState
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
+ } while(0)
+
+/** @brief Flushs the Smartcard DR register
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ */
+#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag
+ * @arg SMARTCARD_FLAG_ORE: Overrun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag.
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun
+ * error) flags are cleared by software sequence: a read operation to
+ * USART_SR register followed by a read operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ */
+#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the SMARTCARD PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the SMARTCARD FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified SmartCard interrupts.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))
+
+/** @brief Macro to enable the SMARTCARD's one bit sample method
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Macro to disable the SMARTCARD's one bit sample method
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Macros to enable or disable the SmartCard DMA request.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __REQUEST__: specifies the SmartCard DMA request.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
+ * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
+ */
+#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__))
+#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
+ * @{
+ */
+
+/** @brief SMARTCARD interruptions flag mask
+ *
+ */
+#define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR3_EIE )
+
+#define SMARTCARD_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
+#define SMARTCARD_DIVMANT(_PCLK_, _BAUD_) (SMARTCARD_DIV((_PCLK_), (_BAUD_))/100U)
+#define SMARTCARD_DIVFRAQ(_PCLK_, _BAUD_) (((SMARTCARD_DIV((_PCLK_), (_BAUD_)) - (SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
+/* SMARTCARD BRR = mantissa + overflow + fraction
+ = (SMARTCARD DIVMANT << 4) + (SMARTCARD DIVFRAQ & 0xF0) + (SMARTCARD DIVFRAQ & 0x0FU) */
+#define SMARTCARD_BRR(_PCLK_, _BAUD_) (((SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) << 4U) + \
+ (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0U)) + \
+ (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU))
+
+#define SMARTCARD_CR1_REG_INDEX 1U
+#define SMARTCARD_CR3_REG_INDEX 3U
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
+ * @{
+ */
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_1_5))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3U) == 0x00U) && ((MODE) != (uint32_t)0x000000U))
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))
+#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \
+ ((NACK) == SMARTCARD_NACK_DISABLE))
+#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1298 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spdifrx.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the SPDIFRX audio interface:
+ * + Initialization and Configuration
+ * + Data transfers functions
+ * + DMA transfers management
+ * + Interrupts and flags management
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The SPDIFRX HAL driver can be used as follow:
+
+ (#) Declare SPDIFRX_HandleTypeDef handle structure.
+ (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API:
+ (##) Enable the SPDIFRX interface clock.
+ (##) SPDIFRX pins configuration:
+ (+++) Enable the clock for the SPDIFRX GPIOs.
+ (+++) Configure these SPDIFRX pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveControlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's).
+ (+++) Configure the SPDIFRX interrupt priority.
+ (+++) Enable the NVIC SPDIFRX IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveControlFlow_DMA() API's).
+ (+++) Declare a DMA handle structure for the reception of the Data Flow channel.
+ (+++) Declare a DMA handle structure for the reception of the Control Flow channel.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters.
+ (+++) Configure the DMA Channel.
+ (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+ DMA CtrlRx/DataRx channel.
+
+ (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits
+ using HAL_SPDIFRX_Init() function.
+
+ -@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros
+ __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process.
+ -@- Make sure that ck_spdif clock is configured.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode for reception operation (for debug purpose) ***
+ ================================================================
+ [..]
+ (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow()
+ (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveControlFlow()
+
+ *** Interrupt mode for reception operation ***
+ =========================================
+ [..]
+ (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT()
+ (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveControlFlow_IT()
+ (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
+ (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
+
+ *** DMA mode for reception operation ***
+ ========================================
+ [..]
+ (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA()
+ (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveControlFlow_DMA()
+ (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
+ (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
+ (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop()
+
+ *** SPDIFRX HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in SPDIFRX HAL driver.
+ (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State)
+ (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State)
+ (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State)
+ (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts
+ (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts
+ (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not.
+
+ [..]
+ (@) You can refer to the SPDIFRX HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup SPDIFRX SPDIFRX
+ * @brief SPDIFRX HAL module driver
+ * @{
+ */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define SPDIFRX_TIMEOUT_VALUE 0xFFFF
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @addtogroup SPDIFRX_Private_Functions
+ * @{
+ */
+static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
+static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
+static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+
+/**
+ * @}
+ */
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions
+ * @{
+ */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the SPDIFRX peripheral:
+
+ (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with
+ the selected configuration:
+ (++) Input Selection (IN0, IN1,...)
+ (++) Maximum allowed re-tries during synchronization phase
+ (++) Wait for activity on SPDIF selected input
+ (++) Channel status selection (from channel A or B)
+ (++) Data format (LSB, MSB, ...)
+ (++) Stereo mode
+ (++) User bits masking (PT,C,U,V,...)
+
+ (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration
+ of the selected SPDIFRXx peripheral.
+ @endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SPDIFRX according to the specified parameters
+ * in the SPDIFRX_InitTypeDef and create the associated handle.
+ * @param hspdif: SPDIFRX handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the SPDIFRX handle allocation */
+ if(hspdif == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the SPDIFRX parameters */
+ assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode));
+ assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection));
+ assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries));
+ assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity));
+ assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection));
+ assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat));
+ assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask));
+ assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask));
+ assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask));
+ assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask));
+
+ if(hspdif->State == HAL_SPDIFRX_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hspdif->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_SPDIFRX_MspInit(hspdif);
+ }
+
+ /* SPDIFRX peripheral state is BUSY*/
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+ /* Disable SPDIFRX interface (IDLE State) */
+ __HAL_SPDIFRX_IDLE(hspdif);
+
+ /* Reset the old SPDIFRX CR configuration */
+ tmpreg = hspdif->Instance->CR;
+
+ tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
+ SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK |
+ SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA |
+ SPDIFRX_CR_INSEL);
+
+ /* Sets the new configuration of the SPDIFRX peripheral */
+ tmpreg |= ((uint16_t) hspdif->Init.StereoMode |
+ hspdif->Init.InputSelection |
+ hspdif->Init.Retries |
+ hspdif->Init.WaitForActivity |
+ hspdif->Init.ChannelSelection |
+ hspdif->Init.DataFormat |
+ hspdif->Init.PreambleTypeMask |
+ hspdif->Init.ChannelStatusMask |
+ hspdif->Init.ValidityBitMask |
+ hspdif->Init.ParityErrorMask);
+
+ hspdif->Instance->CR = tmpreg;
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+ /* SPDIFRX peripheral state is READY*/
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the SPDIFRX peripheral
+ * @param hspdif: SPDIFRX handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Check the SPDIFRX handle allocation */
+ if(hspdif == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance));
+
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+ /* Disable SPDIFRX interface (IDLE state) */
+ __HAL_SPDIFRX_IDLE(hspdif);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_SPDIFRX_MspDeInit(hspdif);
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+ /* SPDIFRX peripheral state is RESET*/
+ hspdif->State = HAL_SPDIFRX_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SPDIFRX MSP Init
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SPDIFRX MSP DeInit
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Sets the SPDIFRX dtat format according to the specified parameters
+ * in the SPDIFRX_InitTypeDef.
+ * @param hspdif: SPDIFRX handle
+ * @param sDataFormat: SPDIFRX data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the SPDIFRX handle allocation */
+ if(hspdif == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the SPDIFRX parameters */
+ assert_param(IS_STEREO_MODE(sDataFormat.StereoMode));
+ assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat));
+ assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask));
+ assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask));
+ assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask));
+ assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask));
+
+ /* Reset the old SPDIFRX CR configuration */
+ tmpreg = hspdif->Instance->CR;
+
+ if(((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) &&
+ (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) ||
+ ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode)))
+ {
+ return HAL_ERROR;
+ }
+
+ tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
+ SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK);
+
+ /* Sets the new configuration of the SPDIFRX peripheral */
+ tmpreg |= ((uint16_t) sDataFormat.StereoMode |
+ sDataFormat.DataFormat |
+ sDataFormat.PreambleTypeMask |
+ sDataFormat.ChannelStatusMask |
+ sDataFormat.ValidityBitMask |
+ sDataFormat.ParityErrorMask);
+
+ hspdif->Instance->CR = tmpreg;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+===============================================================================
+ ##### IO operation functions #####
+===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SPDIFRX data
+ transfers.
+
+ (#) There is two mode of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer start-up.
+ The end of the data processing will be indicated through the
+ dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_SPDIFRX_ReceiveDataFlow()
+ (++) HAL_SPDIFRX_ReceiveControlFlow()
+ (+@) Do not use blocking mode to receive both control and data flow at the same time.
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_SPDIFRX_ReceiveControlFlow_IT()
+ (++) HAL_SPDIFRX_ReceiveDataFlow_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_SPDIFRX_ReceiveControlFlow_DMA()
+ (++) HAL_SPDIFRX_ReceiveDataFlow_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+ (++) HAL_SPDIFRX_RxCpltCallback()
+ (++) HAL_SPDIFRX_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Receives an amount of data (Data Flow) in blocking mode.
+ * @param hspdif: pointer to SPDIFRX_HandleTypeDef structure that contains
+ * the configuration information for SPDIFRX module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hspdif->State == HAL_SPDIFRX_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+ /* Start synchronisation */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+
+ /* Receive data flow */
+ while(Size > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ (*pData++) = hspdif->Instance->DR;
+ Size--;
+ }
+
+ /* SPDIFRX ready */
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data (Control Flow) in blocking mode.
+ * @param hspdif: pointer to a SPDIFRX_HandleTypeDef structure that contains
+ * the configuration information for SPDIFRX module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hspdif->State == HAL_SPDIFRX_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+
+ /* Receive control flow */
+ while(Size > 0U)
+ {
+ /* Wait until CSRNE flag is set */
+ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ (*pData++) = hspdif->Instance->CSR;
+ Size--;
+ }
+
+ /* SPDIFRX ready */
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt
+ * @param hspdif: SPDIFRX handle
+ * @param pData: a 32-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be received .
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
+
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->pRxBuffPtr = pData;
+ hspdif->RxXferSize = Size;
+ hspdif->RxXferCount = Size;
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+ /* Check if a receive process is ongoing or not */
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
+
+ /* Enable the SPDIFRX PE Error Interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+
+ /* Enable the SPDIFRX OVR Error Interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ /* Enable the SPDIFRX RXNE interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+
+ if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U)
+ {
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data (Control Flow) with Interrupt
+ * @param hspdif: SPDIFRX handle
+ * @param pData: a 32-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample (Control Flow) to be received :
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
+
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->pCsBuffPtr = pData;
+ hspdif->CsXferSize = Size;
+ hspdif->CsXferCount = Size;
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+ /* Check if a receive process is ongoing or not */
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
+
+ /* Enable the SPDIFRX PE Error Interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+
+ /* Enable the SPDIFRX OVR Error Interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ /* Enable the SPDIFRX CSRNE interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+
+ if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U)
+ {
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data (Data Flow) mode with DMA
+ * @param hspdif: SPDIFRX handle
+ * @param pData: a 32-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be received :
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
+ {
+ hspdif->pRxBuffPtr = pData;
+ hspdif->RxXferSize = Size;
+ hspdif->RxXferCount = Size;
+
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
+
+ /* Set the SPDIFRX Rx DMA Half transfer complete callback */
+ hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt;
+
+ /* Set the SPDIFRX Rx DMA transfer complete callback */
+ hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt;
+
+ /* Set the DMA error callback */
+ hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError;
+
+ /* Enable the DMA request */
+ HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size);
+
+ /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/
+ hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN;
+
+ if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U)
+ {
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data (Control Flow) with DMA
+ * @param hspdif: SPDIFRX handle
+ * @param pData: a 32-bit pointer to the Receive data buffer.
+ * @param Size: number of data (Control Flow) sample to be received :
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
+ {
+ hspdif->pCsBuffPtr = pData;
+ hspdif->CsXferSize = Size;
+ hspdif->CsXferCount = Size;
+
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
+
+ /* Set the SPDIFRX Rx DMA Half transfer complete callback */
+ hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt;
+
+ /* Set the SPDIFRX Rx DMA transfer complete callback */
+ hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt;
+
+ /* Set the DMA error callback */
+ hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError;
+
+ /* Enable the DMA request */
+ HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size);
+
+ /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/
+ hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN;
+
+ if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U)
+ {
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief stop the audio stream receive from the Media.
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ /* Disable the SPDIFRX DMA requests */
+ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
+ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
+
+ /* Disable the SPDIFRX DMA channel */
+ __HAL_DMA_DISABLE(hspdif->hdmaDrRx);
+ __HAL_DMA_DISABLE(hspdif->hdmaCsRx);
+
+ /* Disable SPDIFRX peripheral */
+ __HAL_SPDIFRX_IDLE(hspdif);
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles SPDIFRX interrupt request.
+ * @param hspdif: SPDIFRX handle
+ * @retval HAL status
+ */
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* SPDIFRX in mode Data Flow Reception ------------------------------------------------*/
+ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_RXNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_RXNE) != RESET))
+ {
+ __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE);
+ SPDIFRX_ReceiveDataFlow_IT(hspdif);
+ }
+
+ /* SPDIFRX in mode Control Flow Reception ------------------------------------------------*/
+ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_CSRNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_CSRNE) != RESET))
+ {
+ __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE);
+ SPDIFRX_ReceiveControlFlow_IT(hspdif);
+ }
+
+ /* SPDIFRX Overrun error interrupt occurred ---------------------------------*/
+ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_OVR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_OVRIE) != RESET))
+ {
+ __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_OVR);
+
+ /* Change the SPDIFRX error code */
+ hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR;
+
+ /* the transfer is not stopped */
+ HAL_SPDIFRX_ErrorCallback(hspdif);
+ }
+
+ /* SPDIFRX Parity error interrupt occurred ---------------------------------*/
+ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_PERR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_PERRIE) != RESET))
+ {
+ __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_PERR);
+
+ /* Change the SPDIFRX error code */
+ hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE;
+
+ /* the transfer is not stopped */
+ HAL_SPDIFRX_ErrorCallback(hspdif);
+ }
+}
+
+/**
+ * @brief Rx Transfer (Data flow) half completed callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer (Data flow) completed callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx (Control flow) Transfer half completed callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer (Control flow) completed callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SPDIFRX error callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+===============================================================================
+ ##### Peripheral State and Errors functions #####
+===============================================================================
+[..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the SPDIFRX state
+ * @param hspdif : SPDIFRX handle
+ * @retval HAL state
+ */
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif)
+{
+ return hspdif->State;
+}
+
+/**
+ * @brief Return the SPDIFRX error code
+ * @param hspdif : SPDIFRX handle
+ * @retval SPDIFRX Error Code
+ */
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif)
+{
+ return hspdif->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA SPDIFRX receive process (Data flow) complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Rx DMA Request */
+ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
+ hspdif->RxXferCount = 0U;
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+ HAL_SPDIFRX_RxCpltCallback(hspdif);
+}
+
+/**
+ * @brief DMA SPDIFRX receive process (Data flow) half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_SPDIFRX_RxHalfCpltCallback(hspdif);
+}
+
+/**
+ * @brief DMA SPDIFRX receive process (Control flow) complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Cb DMA Request */
+ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
+ hspdif->CsXferCount = 0U;
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+ HAL_SPDIFRX_CxCpltCallback(hspdif);
+}
+
+/**
+ * @brief DMA SPDIFRX receive process (Control flow) half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_SPDIFRX_CxHalfCpltCallback(hspdif);
+}
+
+/**
+ * @brief DMA SPDIFRX communication error callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Rx and Cb DMA Request */
+ hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN));
+ hspdif->RxXferCount = 0U;
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Set the error code and execute error callback*/
+ hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA;
+ HAL_SPDIFRX_ErrorCallback(hspdif);
+}
+
+/**
+ * @brief Receive an amount of data (Data Flow) with Interrupt
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Receive data */
+ (*hspdif->pRxBuffPtr++) = hspdif->Instance->DR;
+ hspdif->RxXferCount--;
+
+ if(hspdif->RxXferCount == 0U)
+ {
+ /* Disable RXNE/PE and OVR interrupts */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE);
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ HAL_SPDIFRX_RxCpltCallback(hspdif);
+ }
+}
+
+/**
+ * @brief Receive an amount of data (Control Flow) with Interrupt
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Receive data */
+ (*hspdif->pCsBuffPtr++) = hspdif->Instance->CSR;
+ hspdif->CsXferCount--;
+
+ if(hspdif->CsXferCount == 0U)
+ {
+ /* Disable CSRNE interrupt */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ HAL_SPDIFRX_CxCpltCallback(hspdif);
+ }
+}
+
+/**
+ * @brief This function handles SPDIFRX Communication Timeout.
+ * @param hspdif: SPDIFRX handle
+ * @param Flag: Flag checked
+ * @param Status: Value of the flag expected
+ * @param Timeout: Duration of the timeout
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) != RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,555 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spdifrx.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SPDIFRX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPDIFRX_H
+#define __STM32F4xx_HAL_SPDIFRX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPDIFRX
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPDIFRX Init structure definition
+ */
+typedef struct
+{
+ uint32_t InputSelection; /*!< Specifies the SPDIF input selection.
+ This parameter can be a value of @ref SPDIFRX_Input_Selection */
+
+ uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase.
+ This parameter can be a value of @ref SPDIFRX_Max_Retries */
+
+ uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input.
+ This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */
+
+ uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B.
+ This parameter can be a value of @ref SPDIFRX_Channel_Selection */
+
+ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
+ This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
+ This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PE_Mask */
+}SPDIFRX_InitTypeDef;
+
+/**
+ * @brief SPDIFRX SetDataFormat structure definition
+ */
+typedef struct
+{
+ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
+ This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
+ This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PE_Mask */
+}SPDIFRX_SetDataFormatTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SPDIFRX_STATE_RESET = 0x00U, /*!< SPDIFRX not yet initialized or disabled */
+ HAL_SPDIFRX_STATE_READY = 0x01U, /*!< SPDIFRX initialized and ready for use */
+ HAL_SPDIFRX_STATE_BUSY = 0x02U, /*!< SPDIFRX internal process is ongoing */
+ HAL_SPDIFRX_STATE_BUSY_RX = 0x03U, /*!< SPDIFRX internal Data Flow RX process is ongoing */
+ HAL_SPDIFRX_STATE_BUSY_CX = 0x04U, /*!< SPDIFRX internal Control Flow RX process is ongoing */
+ HAL_SPDIFRX_STATE_ERROR = 0x07U /*!< SPDIFRX error state */
+}HAL_SPDIFRX_StateTypeDef;
+
+/**
+ * @brief SPDIFRX handle Structure definition
+ */
+typedef struct
+{
+ SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */
+
+ SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */
+
+ uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */
+
+ uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */
+
+ __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */
+
+ __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */
+
+ __IO uint32_t ErrorCode; /* SPDIFRX Error code */
+}SPDIFRX_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants
+ * @{
+ */
+/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code
+ * @{
+ */
+#define HAL_SPDIFRX_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SPDIFRX_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */
+#define HAL_SPDIFRX_ERROR_OVR ((uint32_t)0x00000002U) /*!< OVR error */
+#define HAL_SPDIFRX_ERROR_PE ((uint32_t)0x00000004U) /*!< Parity error */
+#define HAL_SPDIFRX_ERROR_DMA ((uint32_t)0x00000008U) /*!< DMA transfer error */
+#define HAL_SPDIFRX_ERROR_UNKNOWN ((uint32_t)0x00000010U) /*!< Unknown Error error */
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection
+ * @{
+ */
+#define SPDIFRX_INPUT_IN0 ((uint32_t)0x00000000U)
+#define SPDIFRX_INPUT_IN1 ((uint32_t)0x00010000U)
+#define SPDIFRX_INPUT_IN2 ((uint32_t)0x00020000U)
+#define SPDIFRX_INPUT_IN3 ((uint32_t)0x00030000U)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries
+ * @{
+ */
+#define SPDIFRX_MAXRETRIES_NONE ((uint32_t)0x00000000U)
+#define SPDIFRX_MAXRETRIES_3 ((uint32_t)0x00001000U)
+#define SPDIFRX_MAXRETRIES_15 ((uint32_t)0x00002000U)
+#define SPDIFRX_MAXRETRIES_63 ((uint32_t)0x00003000U)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity
+ * @{
+ */
+#define SPDIFRX_WAITFORACTIVITY_OFF ((uint32_t)0x00000000U)
+#define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask
+* @{
+*/
+#define SPDIFRX_PREAMBLETYPEMASK_OFF ((uint32_t)0x00000000U)
+#define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask
+* @{
+*/
+#define SPDIFRX_CHANNELSTATUS_OFF ((uint32_t)0x00000000U) /* The channel status and user bits are copied into the SPDIF_DR */
+#define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask
+* @{
+*/
+#define SPDIFRX_VALIDITYMASK_OFF ((uint32_t)0x00000000U)
+#define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask
+* @{
+*/
+#define SPDIFRX_PARITYERRORMASK_OFF ((uint32_t)0x00000000U)
+#define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection
+ * @{
+ */
+#define SPDIFRX_CHANNEL_A ((uint32_t)0x00000000U)
+#define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format
+ * @{
+ */
+#define SPDIFRX_DATAFORMAT_LSB ((uint32_t)0x00000000U)
+#define SPDIFRX_DATAFORMAT_MSB ((uint32_t)0x00000010U)
+#define SPDIFRX_DATAFORMAT_32BITS ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode
+ * @{
+ */
+#define SPDIFRX_STEREOMODE_DISABLE ((uint32_t)0x00000000U)
+#define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_State SPDIFRX State
+ * @{
+ */
+
+#define SPDIFRX_STATE_IDLE ((uint32_t)0xFFFFFFFCU)
+#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001U)
+#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition
+ * @{
+ */
+#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE)
+#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE)
+#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE)
+#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE)
+#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE)
+#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE)
+#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE )
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition
+ * @{
+ */
+#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE)
+#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE)
+#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR)
+#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR)
+#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD)
+#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD)
+#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR)
+#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR)
+#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPDIFRX handle state
+ * @param __HANDLE__: SPDIFRX handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN)
+
+/** @brief Disable the specified SPDIFRX peripheral (IDLE State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE)
+
+/** @brief Enable the specified SPDIFRX peripheral (SYNC State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC)
+
+
+/** @brief Enable the specified SPDIFRX peripheral (RCV State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV)
+
+/** @brief Enable or disable the specified SPDIFRX interrupts.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_IT_RXNE
+ * @arg SPDIFRX_IT_CSRNE
+ * @arg SPDIFRX_IT_PERRIE
+ * @arg SPDIFRX_IT_OVRIE
+ * @arg SPDIFRX_IT_SBLKIE
+ * @arg SPDIFRX_IT_SYNCDIE
+ * @arg SPDIFRX_IT_IFEIE
+ * @retval None
+ */
+#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __INTERRUPT__: specifies the SPDIFRX interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_IT_RXNE
+ * @arg SPDIFRX_IT_CSRNE
+ * @arg SPDIFRX_IT_PERRIE
+ * @arg SPDIFRX_IT_OVRIE
+ * @arg SPDIFRX_IT_SBLKIE
+ * @arg SPDIFRX_IT_SYNCDIE
+ * @arg SPDIFRX_IT_IFEIE
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SPDIFRX flag is set or not.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_FLAG_RXNE
+ * @arg SPDIFRX_FLAG_CSRNE
+ * @arg SPDIFRX_FLAG_PERR
+ * @arg SPDIFRX_FLAG_OVR
+ * @arg SPDIFRX_FLAG_SBD
+ * @arg SPDIFRX_FLAG_SYNCD
+ * @arg SPDIFRX_FLAG_FERR
+ * @arg SPDIFRX_FLAG_SERR
+ * @arg SPDIFRX_FLAG_TERR
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_FLAG_PERR
+ * @arg SPDIFRX_FLAG_OVR
+ * @arg SPDIFRX_SR_SBD
+ * @arg SPDIFRX_SR_SYNCD
+ * @retval None
+ */
+#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPDIFRX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat);
+/**
+ * @}
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+/**
+ * @}
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif);
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros
+ * @{
+ */
+#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \
+ ((INPUT) == SPDIFRX_INPUT_IN2) || \
+ ((INPUT) == SPDIFRX_INPUT_IN3) || \
+ ((INPUT) == SPDIFRX_INPUT_IN0))
+#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \
+ ((RET) == SPDIFRX_MAXRETRIES_3) || \
+ ((RET) == SPDIFRX_MAXRETRIES_15) || \
+ ((RET) == SPDIFRX_MAXRETRIES_63))
+#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \
+ ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF))
+#define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \
+ ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF))
+#define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \
+ ((VAL) == SPDIFRX_VALIDITYMASK_ON))
+#define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \
+ ((VAL) == SPDIFRX_PARITYERRORMASK_ON))
+#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \
+ ((CHANNEL) == SPDIFRX_CHANNEL_B))
+#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \
+ ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \
+ ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS))
+#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \
+ ((MODE) == SPDIFRX_STEREOMODE_ENABLE))
+
+#define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \
+ ((VAL) == SPDIFRX_CHANNELSTATUS_OFF))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_SPDIFRX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2790 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spi.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SPI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Serial Peripheral Interface (SPI) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The SPI HAL driver can be used as follows:
+
+ (#) Declare a SPI_HandleTypeDef handle structure, for example:
+ SPI_HandleTypeDef hspi;
+
+ (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API:
+ (##) Enable the SPIx interface clock
+ (##) SPI pins configuration
+ (+++) Enable the clock for the SPI GPIOs
+ (+++) Configure these SPI pins as alternate function push-pull
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the SPIx interrupt priority
+ (+++) Enable the NVIC SPI IRQ handle
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+ (+++) Enable the DMAx clock
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx stream
+ (+++) Associate the initialized hdma_tx handle to the hspi DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx stream
+
+ (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS
+ management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure.
+
+ (#) Initialize the SPI registers by calling the HAL_SPI_Init() API:
+ (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customized HAL_SPI_MspInit() API.
+ [..]
+ Circular mode restriction:
+ (#) The DMA circular mode cannot be used when the SPI is configured in these modes:
+ (##) Master 2Lines RxOnly
+ (##) Master 1Line Rx
+ (#) The CRC feature is not managed when the DMA circular mode is enabled
+ (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs
+ the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks
+ [..]
+ Master Receive mode restriction:
+ (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=0) or
+ bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI
+ does not initiate a new transfer the following procedure has to be respected:
+ (##) HAL_SPI_DeInit()
+ (##) HAL_SPI_Init()
+ [..]
+ Using the HAL it is not possible to reach all supported SPI frequency with the differents SPI Modes,
+ the following table resume the max SPI frequency reached with data size 8bits/16bits,
+ according to frequency used on APBx Peripheral Clock (fPCLK) used by the SPI instance :
+
+ DataSize = SPI_DATASIZE_8BIT:
+ +----------------------------------------------------------------------------------------------+
+ | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line |
+ | Process | Tranfert mode |---------------------|----------------------|----------------------|
+ | | | Master | Slave | Master | Slave | Master | Slave |
+ |==============================================================================================|
+ | T | Polling | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | / | Interrupt | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA |
+ | R |----------------|----------|----------|-----------|----------|-----------|----------|
+ | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | R | Interrupt | Fpclk/8 | Fpclk/8 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/128 | Fpclk/2 |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/2 | Fpclk/64 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/2 | Fpclk/64 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/128|
+ +----------------------------------------------------------------------------------------------+
+
+ DataSize = SPI_DATASIZE_16BIT:
+ +----------------------------------------------------------------------------------------------+
+ | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line |
+ | Process | Tranfert mode |---------------------|----------------------|----------------------|
+ | | | Master | Slave | Master | Slave | Master | Slave |
+ |==============================================================================================|
+ | T | Polling | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | / | Interrupt | Fpclk/4 | Fpclk/4 | NA | NA | NA | NA |
+ | R |----------------|----------|----------|-----------|----------|-----------|----------|
+ | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/32 | Fpclk/2 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | R | Interrupt | Fpclk/4 | Fpclk/4 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/128 | Fpclk/2 |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/32 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | T | Interrupt | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/64 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/128|
+ +----------------------------------------------------------------------------------------------+
+ @note The max SPI frequency depend on SPI data size (8bits, 16bits),
+ SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA).
+ @note
+ (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA()
+ (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA()
+ (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup SPI SPI
+ * @brief SPI HAL module driver
+ * @{
+ */
+#ifdef HAL_SPI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SPI_Private_Constants SPI Private Constants
+ * @{
+ */
+#define SPI_DEFAULT_TIMEOUT 100U
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SPI_Private_Functions
+ * @{
+ */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAError(DMA_HandleTypeDef *hdma);
+static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, uint32_t State, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef SPI_WaitTXEFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart);
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+#if (USE_SPI_CRC != 0U)
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+#endif /* USE_SPI_CRC */
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi);
+static HAL_StatusTypeDef SPI_CheckFlag_BSY(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Functions SPI Exported Functions
+ * @{
+ */
+
+/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the SPIx peripheral:
+
+ (+) User must implement HAL_SPI_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_SPI_Init() to configure the selected device with
+ the selected configuration:
+ (++) Mode
+ (++) Direction
+ (++) Data Size
+ (++) Clock Polarity and Phase
+ (++) NSS Management
+ (++) BaudRate Prescaler
+ (++) FirstBit
+ (++) TIMode
+ (++) CRC Calculation
+ (++) CRC Polynomial if CRC enabled
+
+ (+) Call the function HAL_SPI_DeInit() to restore the default configuration
+ of the selected SPIx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the SPI according to the specified parameters
+ * in the SPI_InitTypeDef and initialize the associated handle.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
+{
+ /* Check the SPI handle allocation */
+ if(hspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+ assert_param(IS_SPI_MODE(hspi->Init.Mode));
+ assert_param(IS_SPI_DIRECTION(hspi->Init.Direction));
+ assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
+ assert_param(IS_SPI_NSS(hspi->Init.NSS));
+ assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+ assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
+ assert_param(IS_SPI_TIMODE(hspi->Init.TIMode));
+ if(hspi->Init.TIMode == SPI_TIMODE_DISABLE)
+ {
+ assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
+ assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
+ }
+#if (USE_SPI_CRC != 0U)
+ assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
+ }
+#else
+ hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+#endif /* USE_SPI_CRC */
+
+ if(hspi->State == HAL_SPI_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hspi->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_SPI_MspInit(hspi);
+ }
+
+ hspi->State = HAL_SPI_STATE_BUSY;
+
+ /* Disable the selected SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+
+ /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/
+ /* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management,
+ Communication speed, First bit and CRC calculation state */
+ WRITE_REG(hspi->Instance->CR1, (hspi->Init.Mode | hspi->Init.Direction | hspi->Init.DataSize |
+ hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) |
+ hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit | hspi->Init.CRCCalculation) );
+
+ /* Configure : NSS management */
+ WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | hspi->Init.TIMode));
+
+#if (USE_SPI_CRC != 0U)
+ /*---------------------------- SPIx CRCPOLY Configuration ------------------*/
+ /* Configure : CRC Polynomial */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ WRITE_REG(hspi->Instance->CRCPR, hspi->Init.CRCPolynomial);
+ }
+#endif /* USE_SPI_CRC */
+
+#if defined(SPI_I2SCFGR_I2SMOD)
+ /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */
+ CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD);
+#endif /* USE_SPI_CRC */
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->State = HAL_SPI_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De Initialize the SPI peripheral.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi)
+{
+ /* Check the SPI handle allocation */
+ if(hspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check SPI Instance parameter */
+ assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+
+ hspi->State = HAL_SPI_STATE_BUSY;
+
+ /* Disable the SPI Peripheral Clock */
+ __HAL_SPI_DISABLE(hspi);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_SPI_MspDeInit(hspi);
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->State = HAL_SPI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the SPI MSP.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_MspInit should be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-Initialize the SPI MSP.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_MspDeInit should be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SPI
+ data transfers.
+
+ [..] The SPI supports master and slave mode :
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
+ will be executed respectively at the end of the transmit or Receive process
+ The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected
+
+ (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA)
+ exist for 1Line (simplex) and 2Lines (full duplex) modes.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit an amount of data in blocking mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL ) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->pRxBuffPtr = (uint8_t *)NULL;
+ hspi->RxXferSize = 0U;
+ hspi->RxXferCount = 0U;
+ hspi->TxISR = NULL;
+ hspi->RxISR = NULL;
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_TX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Transmit data in 16 Bit mode */
+ if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01))
+ {
+ hspi->Instance->DR = *((uint16_t *)pData);
+ pData += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ /* Transmit data in 16 Bit mode */
+ while (hspi->TxXferCount > 0U)
+ {
+ /* Wait until TXE flag is set to send data */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE))
+ {
+ hspi->Instance->DR = *((uint16_t *)pData);
+ pData += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0U) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+ /* Transmit data in 8 Bit mode */
+ else
+ {
+ if((hspi->Init.Mode == SPI_MODE_SLAVE)|| (hspi->TxXferCount == 0x01))
+ {
+ *((__IO uint8_t*)&hspi->Instance->DR) = (*pData);
+ pData += sizeof(uint8_t);
+ hspi->TxXferCount--;
+ }
+ while (hspi->TxXferCount > 0U)
+ {
+ /* Wait until TXE flag is set to send data */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE))
+ {
+ *((__IO uint8_t*)&hspi->Instance->DR) = (*pData);
+ pData += sizeof(uint8_t);
+ hspi->TxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0U) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+
+ /* Wait until TXE flag */
+ if(SPI_WaitTXEFlagStateUntilTimeout(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Check Busy flag */
+ if(SPI_CheckFlag_BSY(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ errorcode = HAL_ERROR;
+ hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+ goto error;
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ errorcode = HAL_ERROR;
+ }
+
+error:
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+#if (USE_SPI_CRC != 0U)
+ __IO uint16_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
+ uint32_t tickstart = 0U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+ return HAL_SPI_TransmitReceive(hspi,pData,pData,Size,Timeout);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL ) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->pTxBuffPtr = (uint8_t *)NULL;
+ hspi->TxXferSize = 0U;
+ hspi->TxXferCount = 0U;
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ /* this is done to handle the CRCNEXT before the latest data */
+ hspi->RxXferCount--;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Configure communication direction: 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_RX(hspi);
+ }
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Receive data in 8 Bit mode */
+ if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+ {
+ /* Transfer loop */
+ while(hspi->RxXferCount > 0U)
+ {
+ /* Check the RXNE flag */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE))
+ {
+ /* read the received data */
+ (* (uint8_t *)pData)= *(__IO uint8_t *)&hspi->Instance->DR;
+ pData += sizeof(uint8_t);
+ hspi->RxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0U) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+ else
+ {
+ /* Transfer loop */
+ while(hspi->RxXferCount > 0U)
+ {
+ /* Check the RXNE flag */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE))
+ {
+ *((uint16_t*)pData) = hspi->Instance->DR;
+ pData += sizeof(uint16_t);
+ hspi->RxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0U) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Handle the CRC Transmission */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* freeze the CRC before the latest data */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+
+ /* Read the latest data */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* the latest data has not been received */
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Receive last data in 16 Bit mode */
+ if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ *((uint16_t*)pData) = hspi->Instance->DR;
+ }
+ /* Receive last data in 8 Bit mode */
+ else
+ {
+ (*(uint8_t *)pData) = *(__IO uint8_t *)&hspi->Instance->DR;
+ }
+
+ /* Wait the CRC data */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Read CRC to Flush DR and RXNE flag */
+ tmpreg = hspi->Instance->DR;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+ }
+#endif /* USE_SPI_CRC */
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ errorcode = HAL_ERROR;
+ }
+
+error :
+ hspi->State = HAL_SPI_STATE_READY;
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in blocking mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData: pointer to transmission data buffer
+ * @param pRxData: pointer to reception data buffer
+ * @param Size: amount of data to be sent and received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tmp = 0U, tmp1 = 0U;
+#if (USE_SPI_CRC != 0U)
+ __IO uint16_t tmpreg1 = 0U;
+#endif /* USE_SPI_CRC */
+ uint32_t tickstart = 0U;
+ /* Variable used to alternate Rx and Tx during transfer */
+ uint32_t txallowed = 1U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ tmp = hspi->State;
+ tmp1 = hspi->Init.Mode;
+
+ if(!((tmp == HAL_SPI_STATE_READY) || \
+ ((tmp1 == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if(hspi->State == HAL_SPI_STATE_READY)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pRxData;
+ hspi->RxXferCount = Size;
+ hspi->RxXferSize = Size;
+ hspi->pTxBuffPtr = (uint8_t *)pTxData;
+ hspi->TxXferCount = Size;
+ hspi->TxXferSize = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Transmit and Receive data in 16 Bit mode */
+ if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01))
+ {
+ hspi->Instance->DR = *((uint16_t *)pTxData);
+ pTxData += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
+ {
+ /* Check TXE flag */
+ if(txallowed && (hspi->TxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)))
+ {
+ hspi->Instance->DR = *((uint16_t *)pTxData);
+ pTxData += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ /* Next Data is a reception (Rx). Tx not allowed */
+ txallowed = 0U;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ }
+
+ /* Check RXNE flag */
+ if((hspi->RxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)))
+ {
+ *((uint16_t *)pRxData) = hspi->Instance->DR;
+ pRxData += sizeof(uint16_t);
+ hspi->RxXferCount--;
+ /* Next Data is a Transmission (Tx). Tx is allowed */
+ txallowed = 1U;
+ }
+ if((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ /* Transmit and Receive data in 8 Bit mode */
+ else
+ {
+ if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01))
+ {
+ *((__IO uint8_t*)&hspi->Instance->DR) = (*pTxData);
+ pTxData += sizeof(uint8_t);
+ hspi->TxXferCount--;
+ }
+ while((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
+ {
+ /* check TXE flag */
+ if(txallowed && (hspi->TxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)))
+ {
+ *(__IO uint8_t *)&hspi->Instance->DR = (*pTxData++);
+ hspi->TxXferCount--;
+ /* Next Data is a reception (Rx). Tx not allowed */
+ txallowed = 0U;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ }
+
+ /* Wait until RXNE flag is reset */
+ if((hspi->RxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)))
+ {
+ (*(uint8_t *)pRxData++) = hspi->Instance->DR;
+ hspi->RxXferCount--;
+ /* Next Data is a Transmission (Tx). Tx is allowed */
+ txallowed = 1U;
+ }
+ if((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Read CRC from DR to close CRC calculation process */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Wait until TXE flag */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Error on the CRC reception */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ /* Read CRC */
+ tmpreg1 = hspi->Instance->DR;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg1);
+ }
+
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ /* Clear CRC Flag */
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+
+ errorcode = HAL_ERROR;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Wait until TXE flag */
+ if(SPI_WaitTXEFlagStateUntilTimeout(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Check Busy flag */
+ if(SPI_CheckFlag_BSY(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ errorcode = HAL_ERROR;
+ hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+ goto error;
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+error :
+ hspi->State = HAL_SPI_STATE_READY;
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->pRxBuffPtr = (uint8_t *)NULL;
+ hspi->RxXferSize = 0U;
+ hspi->RxXferCount = 0U;
+ hspi->RxISR = NULL;
+
+ /* Set the function for IT treatment */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+ {
+ hspi->TxISR = SPI_TxISR_16BIT;
+ }
+ else
+ {
+ hspi->TxISR = SPI_TxISR_8BIT;
+ }
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_TX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ /* Enable TXE interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE));
+ }
+ else
+ {
+ /* Enable TXE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+ }
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ if((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+ return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->pTxBuffPtr = (uint8_t *)NULL;
+ hspi->TxXferSize = 0U;
+ hspi->TxXferCount = 0U;
+ hspi->TxISR = NULL;
+
+ /* Set the function for IT treatment */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+ {
+ hspi->RxISR = SPI_RxISR_16BIT;
+ }
+ else
+ {
+ hspi->RxISR = SPI_RxISR_8BIT;
+ }
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_RX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Note : The SPI must be enabled after unlocking current process
+ to avoid the risk of SPI interrupt handle execution before current
+ process unlock */
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData: pointer to transmission data buffer
+ * @param pRxData: pointer to reception data buffer
+ * @param Size: amount of data to be sent and received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t tmp = 0U, tmp1 = 0U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ tmp = hspi->State;
+ tmp1 = hspi->Init.Mode;
+
+ if(!((tmp == HAL_SPI_STATE_READY) || \
+ ((tmp1 == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if(hspi->State == HAL_SPI_STATE_READY)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pTxData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t *)pRxData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Set the function for IT treatment */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+ {
+ hspi->RxISR = SPI_2linesRxISR_16BIT;
+ hspi->TxISR = SPI_2linesTxISR_16BIT;
+ }
+ else
+ {
+ hspi->RxISR = SPI_2linesRxISR_8BIT;
+ hspi->TxISR = SPI_2linesTxISR_8BIT;
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Enable TXE, RXNE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with DMA.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->pRxBuffPtr = (uint8_t *)NULL;
+ hspi->TxISR = NULL;
+ hspi->RxISR = NULL;
+ hspi->RxXferSize = 0U;
+ hspi->RxXferCount = 0U;
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_TX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Set the SPI TxDMA Half transfer complete callback */
+ hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt;
+
+ /* Set the SPI TxDMA transfer complete callback */
+ hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt;
+
+ /* Set the DMA error callback */
+ hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the Tx DMA Stream */
+ HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Enable the SPI Error Interrupt Bit */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+ /* Enable Tx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with DMA.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @note When the CRC feature is enabled the pData Length must be Size + 1.
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER))
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+ return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+ hspi->TxXferSize = 0U;
+ hspi->TxXferCount = 0U;
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_RX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Set the SPI RxDMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+ /* Set the SPI Rx DMA transfer complete callback */
+ hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+
+ /* Set the DMA error callback */
+ hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the Rx DMA Stream */
+ HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Enable the SPI Error Interrupt Bit */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+ /* Enable Rx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+error:
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in non-blocking mode with DMA.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData: pointer to transmission data buffer
+ * @param pRxData: pointer to reception data buffer
+ * @note When the CRC feature is enabled the pRxData Length must be Size + 1
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t tmp = 0U, tmp1 = 0U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ tmp = hspi->State;
+ tmp1 = hspi->Init.Mode;
+ if(!((tmp == HAL_SPI_STATE_READY) ||
+ ((tmp1 == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if(hspi->State == HAL_SPI_STATE_READY)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t*)pTxData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t*)pRxData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */
+ if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+ {
+ /* Set the SPI Rx DMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+ hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+ }
+ else
+ {
+ /* Set the SPI Tx/Rx DMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
+ hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+ }
+
+ /* Set the DMA error callback */
+ hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the Rx DMA Stream */
+ HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+
+ /* Enable Rx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+ /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
+ is performed in DMA reception complete callback */
+ hspi->hdmatx->XferHalfCpltCallback = NULL;
+ hspi->hdmatx->XferCpltCallback = NULL;
+ hspi->hdmatx->XferErrorCallback = NULL;
+ hspi->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the Tx DMA Stream */
+ HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+ /* Enable the SPI Error Interrupt Bit */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+ /* Enable Tx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Stop the DMA Transfer.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi)
+{
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback()
+ */
+
+ /* Abort the SPI DMA tx Stream */
+ if(hspi->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hspi->hdmatx);
+ }
+ /* Abort the SPI DMA rx Stream */
+ if(hspi->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hspi->hdmarx);
+ }
+
+ /* Disable the SPI DMA Tx & Rx requests */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+ hspi->State = HAL_SPI_STATE_READY;
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle SPI interrupt request.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval None
+ */
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi)
+{
+ uint32_t itsource = hspi->Instance->CR2;
+ uint32_t itflag = hspi->Instance->SR;
+
+ /* SPI in mode Receiver ----------------------------------------------------*/
+ if(((itflag & SPI_FLAG_OVR) == RESET) &&
+ ((itflag & SPI_FLAG_RXNE) != RESET) && ((itsource & SPI_IT_RXNE) != RESET))
+ {
+ hspi->RxISR(hspi);
+ return;
+ }
+
+ /* SPI in mode Transmitter -------------------------------------------------*/
+ if(((itflag & SPI_FLAG_TXE) != RESET) && ((itsource & SPI_IT_TXE) != RESET))
+ {
+ hspi->TxISR(hspi);
+ return;
+ }
+
+ /* SPI in Error Treatment --------------------------------------------------*/
+ if(((itflag & (SPI_FLAG_MODF | SPI_FLAG_OVR | SPI_FLAG_FRE)) != RESET) && ((itsource & SPI_IT_ERR) != RESET))
+ {
+ /* SPI Overrun error interrupt occurred ----------------------------------*/
+ if((itflag & SPI_FLAG_OVR) != RESET)
+ {
+ if(hspi->State != HAL_SPI_STATE_BUSY_TX)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR);
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+ else
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ return;
+ }
+ }
+
+ /* SPI Mode Fault error interrupt occurred -------------------------------*/
+ if((itflag & SPI_FLAG_MODF) != RESET)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF);
+ __HAL_SPI_CLEAR_MODFFLAG(hspi);
+ }
+
+ /* SPI Frame error interrupt occurred ------------------------------------*/
+ if((itflag & SPI_FLAG_FRE) != RESET)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE);
+ __HAL_SPI_CLEAR_FREFLAG(hspi);
+ }
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ /* Disable all interrupts */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR);
+
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Disable the SPI DMA requests if enabled */
+ if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN))||(HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN)))
+ {
+ CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN));
+
+ /* Abort the SPI DMA Rx channel */
+ if(hspi->hdmarx != NULL)
+ {
+ /* Set the SPI DMA Abort callback :
+ will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */
+ hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError;
+ HAL_DMA_Abort_IT(hspi->hdmarx);
+ }
+ /* Abort the SPI DMA Tx channel */
+ if(hspi->hdmatx != NULL)
+ {
+ /* Set the SPI DMA Abort callback :
+ will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */
+ hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError;
+ HAL_DMA_Abort_IT(hspi->hdmatx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ }
+ return;
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_RxCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx and Rx Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxRxCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxHalfCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx and Rx Half Transfer callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file
+ */
+}
+
+/**
+ * @brief SPI error callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+ __weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_ErrorCallback should be implemented in the user file
+ */
+ /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes
+ and user can use HAL_SPI_GetError() API to check the latest error occurred
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief SPI control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SPI.
+ (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral
+ (+) HAL_SPI_GetError() check in run-time Errors occurring during communication
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the SPI handle state.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval SPI state
+ */
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi)
+{
+ /* Return SPI handle state */
+ return hspi->State;
+}
+
+/**
+ * @brief Return the SPI error code.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval SPI error code in bitmap format
+ */
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi)
+{
+ /* Return SPI ErrorCode */
+ return hspi->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Private_Functions
+ * @brief Private functions
+ * @{
+ */
+
+/**
+ * @brief DMA SPI transmit process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ uint32_t tickstart = 0U;
+
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ /* DMA Normal Mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ /* Disable Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+ /* Check the end of the transaction */
+ if(SPI_CheckFlag_BSY(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received data is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ hspi->TxXferCount = 0U;
+ hspi->State = HAL_SPI_STATE_READY;
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+ }
+ HAL_SPI_TxCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI receive process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+#if (USE_SPI_CRC != 0U)
+ uint32_t tickstart = 0U;
+ __IO uint16_t tmpreg = 0U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+#endif /* USE_SPI_CRC */
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ /* CRC handling */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Wait until RXNE flag */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ /* Error on the CRC reception */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ }
+ /* Read CRC */
+ tmpreg = hspi->Instance->DR;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ hspi->RxXferCount = 0U;
+ hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+ }
+ HAL_SPI_RxCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI transmit receive process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ uint32_t tickstart = 0U;
+#if (USE_SPI_CRC != 0U)
+ __IO int16_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ /* CRC handling */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Wait the CRC data */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ }
+ /* Read CRC to Flush DR and RXNE flag */
+ tmpreg = hspi->Instance->DR;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+ }
+#endif /* USE_SPI_CRC */
+ /* Check the end of the transaction */
+ if(SPI_CheckFlag_BSY(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Disable Rx/Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ hspi->TxXferCount = 0U;
+ hspi->RxXferCount = 0U;
+ hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+ }
+ HAL_SPI_TxRxCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI half transmit process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_SPI_TxHalfCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI half receive process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_SPI_RxHalfCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI half transmit receive process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_SPI_TxRxHalfCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI communication error callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = (SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+/* Stop the disable DMA transfer on SPI side */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_ErrorCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hspi->RxXferCount = 0;
+ hspi->TxXferCount = 0;
+
+ HAL_SPI_ErrorCallback(hspi);
+}
+
+/**
+ * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 8bit mode */
+ *hspi->pRxBuffPtr++ = *((__IO uint8_t *)&hspi->Instance->DR);
+ hspi->RxXferCount--;
+
+ /* check end of the reception */
+ if(hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_2linesRxISR_8BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ if(hspi->TxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ __IO uint8_t tmpreg = 0U;
+
+ /* Read data register to flush CRC */
+ tmpreg = *((__IO uint8_t *)&hspi->Instance->DR);
+
+ /* To avoid GCC warning */
+
+ UNUSED(tmpreg);
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ if(hspi->TxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+ hspi->TxXferCount--;
+
+ /* check the end of the transmission */
+ if(hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+ if(hspi->RxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+/**
+ * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 16 Bit mode */
+ *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+
+ if(hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_2linesRxISR_16BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ if(hspi->TxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 16 Bit mode */
+ __IO uint16_t tmpreg = 0U;
+
+ /* Read data register to flush CRC */
+ tmpreg = hspi->Instance->DR;
+
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ SPI_CloseRxTx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Transmit data in 16 Bit mode */
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+
+ /* Enable CRC Transmission */
+ if(hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+ if(hspi->RxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Manage the CRC 8-bit receive in Interrupt context.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ __IO uint8_t tmpreg = 0U;
+
+ /* Read data register to flush CRC */
+ tmpreg = *((__IO uint8_t*)&hspi->Instance->DR);
+
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+
+ SPI_CloseRx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Manage the receive 8-bit in Interrupt context.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *hspi->pRxBuffPtr++ = (*(__IO uint8_t *)&hspi->Instance->DR);
+ hspi->RxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_RxISR_8BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseRx_ISR(hspi);
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Manage the CRC 16-bit receive in Interrupt context.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ __IO uint16_t tmpreg = 0U;
+
+ /* Read data register to flush CRC */
+ tmpreg = hspi->Instance->DR;
+
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ SPI_CloseRx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Manage the 16-bit receive in Interrupt context.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *((uint16_t *)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_RxISR_16BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseRx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle the data 8-bit transmit in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+ hspi->TxXferCount--;
+
+ if(hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Enable CRC Transmission */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseTx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle the data 16-bit transmit in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Transmit data in 16 Bit mode */
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+
+ if(hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Enable CRC Transmission */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseTx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle SPI Communication Timeout.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Flag: SPI flag to check
+ * @param State: flag state to check
+ * @param Timeout: Timeout duration
+ * @param Tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, uint32_t State, uint32_t Timeout, uint32_t Tickstart)
+{
+ while((hspi->Instance->SR & Flag) != State)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) >= Timeout))
+ {
+ /* Disable the SPI and reset the CRC: the CRC value should be cleared
+ on both master and slave sides in order to resynchronize the master
+ and slave for their respective CRC calculation */
+
+ /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+
+ hspi->State= HAL_SPI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle SPI Communication Timeout.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Flag: SPI TXE flag to check
+ * @param State: flag state to check
+ * @param Timeout: Timeout duration
+ * @param Tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_WaitTXEFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart)
+{
+ while((hspi->Instance->SR & SPI_FLAG_TXE) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) >= Timeout))
+ {
+ /* Disable the SPI and reset the CRC: the CRC value should be cleared
+ on both master and slave sides in order to resynchronize the master
+ and slave for their respective CRC calculation */
+
+ /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+
+ hspi->State= HAL_SPI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle to check BSY flag before start a new transaction.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Timeout: Timeout duration
+ * @param Tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_CheckFlag_BSY(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Control the BSY flag */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ return HAL_TIMEOUT;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle the end of the RXTX transaction.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi)
+{
+ uint32_t tickstart = 0U;
+ __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24 / 1000);
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ /* Disable ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+ /* Wait until TXE flag is set */
+ do
+ {
+ if(count-- == 0)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ break;
+ }
+ }
+ while((hspi->Instance->SR & SPI_FLAG_TXE) == RESET);
+
+ /* Check the end of the transaction */
+ if(SPI_CheckFlag_BSY(hspi, SPI_DEFAULT_TIMEOUT, tickstart)!=HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ else
+ {
+#endif /* USE_SPI_CRC */
+ if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+ {
+ if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_RxCpltCallback(hspi);
+ }
+ else
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_TxRxCpltCallback(hspi);
+ }
+ }
+ else
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_ErrorCallback(hspi);
+ }
+#if (USE_SPI_CRC != 0U)
+ }
+#endif /* USE_SPI_CRC */
+}
+
+/**
+ * @brief Handle the end of the RX transaction.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi)
+{
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Check the end of the transaction */
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+ hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ else
+ {
+#endif /* USE_SPI_CRC */
+ if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_RxCpltCallback(hspi);
+ }
+ else
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ }
+#if (USE_SPI_CRC != 0U)
+ }
+#endif /* USE_SPI_CRC */
+}
+
+/**
+ * @brief Handle the end of the TX transaction.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi)
+{
+ uint32_t tickstart = 0U;
+ __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24 / 1000);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* Wait until TXE flag is set */
+ do
+ {
+ if(count-- == 0)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ break;
+ }
+ }
+ while((hspi->Instance->SR & SPI_FLAG_TXE) == RESET);
+
+ /* Disable TXE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+
+ /* Check Busy flag */
+ if(SPI_CheckFlag_BSY(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ hspi->State = HAL_SPI_STATE_READY;
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ else
+ {
+ HAL_SPI_TxCpltCallback(hspi);
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,583 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPI_H
+#define __STM32F4xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_Mode */
+
+ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
+ This parameter can be a value of @ref SPI_Direction */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_Data_Size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+}SPI_InitTypeDef;
+
+/**
+ * @brief HAL SPI State structure definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06U /*!< SPI error state */
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /* SPI registers base address */
+
+ SPI_InitTypeDef Init; /* SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SPI Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SPI Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
+
+ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_SPI_StateTypeDef State; /* SPI communication state */
+
+ __IO uint32_t ErrorCode; /* SPI Error code */
+
+}SPI_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_Error_Code SPI Error Code
+ * @{
+ */
+#define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001U) /*!< MODF error */
+#define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002U) /*!< CRC error */
+#define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004U) /*!< OVR error */
+#define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008U) /*!< FRE error */
+#define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020U) /*!< Flag: RXNE,TXE, BSY */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Mode SPI Mode
+ * @{
+ */
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000U)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction SPI Direction Mode
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000U)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Data_Size SPI Data Size
+ * @{
+ */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000U)
+#define SPI_DATASIZE_16BIT SPI_CR1_DFF
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000U)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000U)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000U)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000U)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008U)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010U)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018U)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020U)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028U)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030U)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000U)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode SPI TI Mode
+ * @{
+ */
+#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000U)
+#define SPI_TIMODE_ENABLE SPI_CR2_FRF
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000U)
+#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Flags_definition SPI Flags Definition
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPI handle state.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI interrupts.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified SPI interrupt source is enabled or not.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the SPI CRCERR pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
+
+/** @brief Clear the SPI MODF pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_modf = 0x00U; \
+ tmpreg_modf = (__HANDLE__)->Instance->SR; \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \
+ UNUSED(tmpreg_modf); \
+ } while(0)
+
+/** @brief Clear the SPI OVR pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_ovr = 0x00U; \
+ tmpreg_ovr = (__HANDLE__)->Instance->DR; \
+ tmpreg_ovr = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_ovr); \
+ } while(0)
+
+/** @brief Clear the SPI FRE pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_fre = 0x00U; \
+ tmpreg_fre = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_fre); \
+ }while(0)
+
+/** @brief Enable the SPI peripheral.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
+
+/** @brief Disable the SPI peripheral.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+ * @{
+ */
+
+/** @brief Set the SPI transmit-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+/** @brief Set the SPI receive-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
+
+/** @brief Reset the CRC calculation of the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+
+#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT))
+
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \
+ ((MODE) == SPI_TIMODE_ENABLE))
+
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLE))
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x01U) && ((POLYNOMIAL) <= 0xFFFFU))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPI_Private_Functions SPI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,693 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sram.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SRAM HAL module driver.
+ * This file provides a generic firmware to drive SRAM memories
+ * mounted as external device.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control SRAM memories. It uses the FMC layer functions to interface
+ with SRAM devices.
+ The following sequence should be followed to configure the FMC/FSMC to interface
+ with SRAM/PSRAM memories:
+
+ (#) Declare a SRAM_HandleTypeDef handle structure, for example:
+ SRAM_HandleTypeDef hsram; and:
+
+ (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed
+ values of the structure member.
+
+ (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined
+ base register instance for NOR or SRAM device
+
+ (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined
+ base register instance for NOR or SRAM extended mode
+
+ (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended
+ mode timings; for example:
+ FMC_NORSRAM_TimingTypeDef Timing and FMC_NORSRAM_TimingTypeDef ExTiming;
+ and fill its fields with the allowed values of the structure member.
+
+ (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function
+ performs the following sequence:
+
+ (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit()
+ (##) Control register configuration using the FMC NORSRAM interface function
+ FMC_NORSRAM_Init()
+ (##) Timing register configuration using the FMC NORSRAM interface function
+ FMC_NORSRAM_Timing_Init()
+ (##) Extended mode Timing register configuration using the FMC NORSRAM interface function
+ FMC_NORSRAM_Extended_Timing_Init()
+ (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE()
+
+ (#) At this stage you can perform read/write accesses from/to the memory connected
+ to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the
+ following APIs:
+ (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access
+ (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer
+
+ (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/
+ HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation
+
+ (#) You can continuously monitor the SRAM device HAL state by calling the function
+ HAL_SRAM_GetState()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SRAM SRAM
+ * @brief SRAM driver modules
+ * @{
+ */
+#ifdef HAL_SRAM_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SRAM_Exported_Functions SRAM Exported Functions
+ * @{
+ */
+/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SRAM Initialization and de_initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to initialize/de-initialize
+ the SRAM memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Performs the SRAM device initialization sequence
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param Timing: Pointer to SRAM control timing structure
+ * @param ExtTiming: Pointer to SRAM extended mode timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{
+ /* Check the SRAM handle parameter */
+ if(hsram == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsram->State == HAL_SRAM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hsram->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_SRAM_MspInit(hsram);
+ }
+
+ /* Initialize SRAM control Interface */
+ FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init));
+
+ /* Initialize SRAM timing Interface */
+ FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank);
+
+ /* Initialize SRAM extended mode timing Interface */
+ FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, hsram->Init.ExtendedMode);
+
+ /* Enable the NORSRAM device */
+ __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Performs the SRAM device De-initialization sequence.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram)
+{
+ /* De-Initialize the low level hardware (MSP) */
+ HAL_SRAM_MspDeInit(hsram);
+
+ /* Configure the SRAM registers with their reset values */
+ FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);
+
+ hsram->State = HAL_SRAM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SRAM MSP Init.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval None
+ */
+__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsram);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SRAM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SRAM MSP DeInit.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval None
+ */
+__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsram);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SRAM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA transfer complete callback.
+ * @param hdma: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval None
+ */
+__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA transfer complete error callback.
+ * @param hdma: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval None
+ */
+__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SRAM_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SRAM Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the SRAM memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads 8-bit buffer from SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint8_t * pSramAddress = (uint8_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Read data from memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint8_t *)pSramAddress;
+ pDstBuffer++;
+ pSramAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 8-bit buffer to SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint8_t * pSramAddress = (uint8_t *)pAddress;
+
+ /* Check the SRAM controller state */
+ if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint8_t *)pSramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSramAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads 16-bit buffer from SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint16_t * pSramAddress = (uint16_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Read data from memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint16_t *)pSramAddress;
+ pDstBuffer++;
+ pSramAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 16-bit buffer to SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint16_t * pSramAddress = (uint16_t *)pAddress;
+
+ /* Check the SRAM controller state */
+ if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint16_t *)pSramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSramAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads 32-bit buffer from SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Read data from memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint32_t *)pAddress;
+ pDstBuffer++;
+ pAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 32-bit buffer to SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+ /* Check the SRAM controller state */
+ if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint32_t *)pAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads a Words data from the SRAM memory using DMA transfer.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Configure DMA user callbacks */
+ hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;
+ hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes a Words data buffer to SRAM memory using DMA transfer.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+ /* Check the SRAM controller state */
+ if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Configure DMA user callbacks */
+ hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;
+ hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SRAM_Exported_Functions_Group3 Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### SRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the SRAM interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically SRAM write operation.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Enable write operation */
+ FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically SRAM write operation.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Disable write operation */
+ FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_PROTECTED;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SRAM_Exported_Functions_Group4 State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### SRAM State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the SRAM controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the SRAM controller state
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval HAL state
+ */
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram)
+{
+ return hsram->State;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#endif /* HAL_SRAM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,207 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sram.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SRAM_H
+#define __STM32F4xx_HAL_SRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx)
+
+/** @addtogroup SRAM
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Types SRAM Exported Types
+ * @{
+ */
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_SRAM_STATE_RESET = 0x00U, /*!< SRAM not yet initialized or disabled */
+ HAL_SRAM_STATE_READY = 0x01U, /*!< SRAM initialized and ready for use */
+ HAL_SRAM_STATE_BUSY = 0x02U, /*!< SRAM internal process is ongoing */
+ HAL_SRAM_STATE_ERROR = 0x03U, /*!< SRAM error state */
+ HAL_SRAM_STATE_PROTECTED = 0x04U /*!< SRAM peripheral NORSRAM device write protected */
+
+}HAL_SRAM_StateTypeDef;
+
+/**
+ * @brief SRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< SRAM locking object */
+
+ __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SRAM_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Macros SRAM Exported Macros
+ * @{
+ */
+/** @brief Reset SRAM handle state
+ * @param __HANDLE__: SRAM handle
+ * @retval None
+ */
+#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SRAM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
+
+void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group3
+ * @{
+ */
+/* SRAM Control functions ******************************************************/
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group4
+ * @{
+ */
+/* SRAM State functions *********************************************************/
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx */
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,5387 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer (TIM) peripheral:
+ * + Time Base Initialization
+ * + Time Base Start
+ * + Time Base Start Interruption
+ * + Time Base Start DMA
+ * + Time Output Compare/PWM Initialization
+ * + Time Output Compare/PWM Channel Configuration
+ * + Time Output Compare/PWM Start
+ * + Time Output Compare/PWM Start Interruption
+ * + Time Output Compare/PWM Start DMA
+ * + Time Input Capture Initialization
+ * + Time Input Capture Channel Configuration
+ * + Time Input Capture Start
+ * + Time Input Capture Start Interruption
+ * + Time Input Capture Start DMA
+ * + Time One Pulse Initialization
+ * + Time One Pulse Channel Configuration
+ * + Time One Pulse Start
+ * + Time Encoder Interface Initialization
+ * + Time Encoder Interface Start
+ * + Time Encoder Interface Start Interruption
+ * + Time Encoder Interface Start DMA
+ * + Commutation Event configuration with Interruption and DMA
+ * + Time OCRef clear configuration
+ * + Time External Clock configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Generic features #####
+ ==============================================================================
+ [..] The Timer features include:
+ (#) 16-bit up, down, up/down auto-reload counter.
+ (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+ counter clock frequency either by any factor between 1 and 65536.
+ (#) Up to 4 independent channels for:
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Time Base : HAL_TIM_Base_MspInit()
+ (++) Input Capture : HAL_TIM_IC_MspInit()
+ (++) Output Compare : HAL_TIM_OC_MspInit()
+ (++) PWM generation : HAL_TIM_PWM_MspInit()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+ (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+ Output Compare signal.
+ (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+ PWM signal.
+ (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+ external signal.
+ (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+ in One Pulse Mode.
+ (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+ (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+ (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+ (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+ (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+ (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+ (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+ (#) The DMA Burst is managed with the two following functions:
+ HAL_TIM_DMABurst_WriteStart()
+ HAL_TIM_DMABurst_ReadStart()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIM TIM
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+ * @{
+ */
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t TIM_ITRx);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Base functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM base.
+ (+) De-initialize the TIM base.
+ (+) Start the Time Base.
+ (+) Stop the Time Base.
+ (+) Start the Time Base and enable interrupt.
+ (+) Stop the Time Base and disable interrupt.
+ (+) Start the Time Base and enable DMA transfer.
+ (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Time base Unit according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Set the Time Base configuration */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Base peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Base MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Base MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Base generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Enable the TIM Update interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable the TIM Update interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+
+ /* Enable the TIM Update DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Output Compare.
+ (+) De-initialize the TIM Output Compare.
+ (+) Start the Time Output Compare.
+ (+) Stop the Time Output Compare.
+ (+) Start the Time Output Compare and enable interrupt.
+ (+) Stop the Time Output Compare and disable interrupt.
+ (+) Start the Time Output Compare and enable DMA transfer.
+ (+) Stop the Time Output Compare and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Output Compare according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the Output Compare */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Output Compare MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM OPWM.
+ (+) De-initialize the TIM PWM.
+ (+) Start the Time PWM.
+ (+) Stop the Time PWM.
+ (+) Start the Time PWM and enable interrupt.
+ (+) Stop the Time PWM and disable interrupt.
+ (+) Start the Time PWM and enable DMA transfer.
+ (+) Stop the Time PWM and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM PWM Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the PWM */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM PWM MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the PWM signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Capture/Compare 3 request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Input Capture functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Input Capture.
+ (+) De-initialize the TIM Input Capture.
+ (+) Start the Time Input Capture.
+ (+) Stop the Time Input Capture.
+ (+) Start the Time Input Capture and enable interrupt.
+ (+) Stop the Time Input Capture and disable interrupt.
+ (+) Start the Time Input Capture and enable DMA transfer.
+ (+) Stop the Time Input Capture and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Input Capture Time base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the input capture */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM INput Capture MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Input Capture MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement on in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The destination Buffer address.
+ * @param Length: The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement on in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM One Pulse.
+ (+) De-initialize the TIM One Pulse.
+ (+) Start the Time One Pulse.
+ (+) Stop the Time One Pulse.
+ (+) Start the Time One Pulse and enable interrupt.
+ (+) Stop the Time One Pulse and disable interrupt.
+ (+) Start the Time One Pulse and enable DMA transfer.
+ (+) Stop the Time One Pulse and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM One Pulse Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OnePulseMode: Select the One pulse mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+ * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OnePulse_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the One Pulse Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Reset the OPM Bit */
+ htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+ /* Configure the OPM Mode */
+ htim->Instance->CR1 |= OnePulseMode;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM One Pulse
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_OnePulse_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM One Pulse MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel : TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel : TIM Channels to be disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel : TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel : TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Encoder functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Encoder.
+ (+) De-initialize the TIM Encoder.
+ (+) Start the Time Encoder.
+ (+) Stop the Time Encoder.
+ (+) Start the Time Encoder and enable interrupt.
+ (+) Stop the Time Encoder and disable interrupt.
+ (+) Start the Time Encoder and enable DMA transfer.
+ (+) Stop the Time Encoder and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Encoder Interface and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM Encoder Interface configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig)
+{
+ uint32_t tmpsmcr = 0U;
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_Encoder_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Reset the SMS bits */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = htim->Instance->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr |= sConfig->EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+ tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U));
+
+ /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+ tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+ tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+ tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U);
+ tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U);
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+ tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+ tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U);
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Write to TIMx CCMR1 */
+ htim->Instance->CCMR1 = tmpccmr1;
+
+ /* Write to TIMx CCER */
+ htim->Instance->CCER = tmpccer;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Encoder interface
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Encoder_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Encoder Interface MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Encoder Interface MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ }
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ }
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ /* Enable the capture compare Interrupts 1 and/or 2 */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 and 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @param pData1: The destination Buffer address for IC1.
+ * @param pData2: The destination Buffer address for IC2.
+ * @param Length: The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((((pData1 == 0U) || (pData2 == 0U) )) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_ALL:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 and 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ *
+@verbatim
+ ==============================================================================
+ ##### IRQ handler management #####
+ ==============================================================================
+ [..]
+ This section provides Timer IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief This function handles TIM interrupts requests.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+ /* Capture compare 1 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
+ {
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ }
+ /* Capture compare 2 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 3 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 4 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* TIM Update event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
+ HAL_TIM_PeriodElapsedCallback(htim);
+ }
+ }
+ /* TIM Break input event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+ HAL_TIMEx_BreakCallback(htim);
+ }
+ }
+ /* TIM Trigger detection event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
+ HAL_TIM_TriggerCallback(htim);
+ }
+ }
+ /* TIM commutation event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
+ HAL_TIMEx_CommutationCallback(htim);
+ }
+ }
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM Output Compare configuration structure
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture Channels according to the specified
+ * parameters in the TIM_IC_InitTypeDef.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM Input Capture configuration structure
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if (Channel == TIM_CHANNEL_1)
+ {
+ /* TI1 Configuration */
+ TIM_TI1_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ /* TI2 Configuration */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Set the IC2PSC value */
+ htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U);
+ }
+ else if (Channel == TIM_CHANNEL_3)
+ {
+ /* TI3 Configuration */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ TIM_TI3_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC3PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+ /* Set the IC3PSC value */
+ htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+ }
+ else
+ {
+ /* TI4 Configuration */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ TIM_TI4_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC4PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+ /* Set the IC4PSC value */
+ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U);
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM PWM configuration structure
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ __HAL_LOCK(htim);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse Channels according to the specified
+ * parameters in the TIM_OnePulse_InitTypeDef.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM One Pulse configuration structure
+ * @param OutputChannel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param InputChannel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel)
+{
+ TIM_OC_InitTypeDef temp1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+ assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+ if(OutputChannel != InputChannel)
+ {
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Extract the Output compare configuration from sConfig structure */
+ temp1.OCMode = sConfig->OCMode;
+ temp1.Pulse = sConfig->Pulse;
+ temp1.OCPolarity = sConfig->OCPolarity;
+ temp1.OCNPolarity = sConfig->OCNPolarity;
+ temp1.OCIdleState = sConfig->OCIdleState;
+ temp1.OCNIdleState = sConfig->OCNIdleState;
+
+ switch (OutputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_OC1_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_OC2_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ default:
+ break;
+ }
+ switch (InputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstBaseAddress: TIM Base address from when the DMA will starts the Data write.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc: TIM DMA Request sources.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer: The Buffer address.
+ * @param BurstLength: DMA Burst length. This parameter can be one value
+ * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t* BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0U) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ default:
+ break;
+ }
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM DMA Burst mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstRequestSrc: TIM DMA Request sources to disable
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstBaseAddress: TIM Base address from when the DMA will starts the Data read.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc: TIM DMA Request sources.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer: The Buffer address.
+ * @param BurstLength: DMA Burst length. This parameter can be one value
+ * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0U) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DMA burst reading
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstRequestSrc: TIM DMA Request sources to disable.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Generate a software event
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param EventSource: specifies the event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+ * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EVENTSOURCE_COM: Timer COM event source
+ * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+ * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+ * @note TIM6 and TIM7 can only generate an update event.
+ * @note TIM_EVENTSOURCE_COM and TIM_EVENTSOURCE_BREAK are used only with TIM1 and TIM8.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the event sources */
+ htim->Instance->EGR = EventSource;
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sClearInputConfig: pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel: specifies the TIM Channel.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if(sClearInputConfig->ClearInputSource == TIM_CLEARINPUTSOURCE_ETR)
+ {
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the clock source to be used
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sClockSourceConfig: pointer to a TIM_ClockConfigTypeDef structure that
+ * contains the clock source information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+
+ /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+ tmpsmcr = htim->Instance->SMCR;
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+ htim->Instance->SMCR = tmpsmcr;
+
+ switch (sClockSourceConfig->ClockSource)
+ {
+ case TIM_CLOCKSOURCE_INTERNAL:
+ {
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE1:
+ {
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+ /* Reset the SMS and TS Bits */
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ /* Select the External clock mode1 and the ETRF trigger */
+ tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE2:
+ {
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Enable the External clock mode2 */
+ htim->Instance->SMCR |= TIM_SMCR_ECE;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_TI1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI1ED:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR0:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR1:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR3:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Selects the signal connected to the TI1 input: direct from CH1_input
+ * or a XOR combination between CH1_input, CH2_input & CH3_input
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param TI1_Selection: Indicate whether or not channel 1 is connected to the
+ * output of a XOR gate.
+ * This parameter can be one of the following values:
+ * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+ * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+ * pins are connected to the TI1 input (XOR combination)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+ uint32_t tmpcr2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Reset the TI1 selection */
+ tmpcr2 &= ~TIM_CR2_TI1S;
+
+ /* Set the TI1 selection */
+ tmpcr2 |= TI1_Selection;
+
+ /* Write to TIMxCR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Disable Trigger Interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode in interrupt mode
+ * @param htim: TIM handle.
+ * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Enable Trigger Interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read the captured value from Capture Compare unit
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval Captured value
+ */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpreg = 0U;
+
+ __HAL_LOCK(htim);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Return the capture 1 value */
+ tmpreg = htim->Instance->CCR1;
+
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Return the capture 2 value */
+ tmpreg = htim->Instance->CCR2;
+
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Return the capture 3 value */
+ tmpreg = htim->Instance->CCR3;
+
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Return the capture 4 value */
+ tmpreg = htim->Instance->CCR4;
+
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+ return tmpreg;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides TIM callback functions:
+ (+) Timer Period elapsed callback
+ (+) Timer Output Compare callback
+ (+) Timer Input capture callback
+ (+) Timer Trigger callback
+ (+) Timer Error callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Period elapsed callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Output Compare callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Input Capture callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWM Pulse finished callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Trigger detection callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timer error callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_ErrorCallback could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Base state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM OC state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM PWM state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Input Capture state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM One Pulse Mode state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Encoder Mode state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+/**
+ * @}
+ */
+
+/**
+ * @brief Time Base configuration
+ * @param TIMx: TIM peripheral
+ * @param Structure: pointer on TIM Time Base required parameters
+ * @retval None
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+ uint32_t tmpcr1 = 0U;
+ tmpcr1 = TIMx->CR1;
+
+ /* Set TIM Time Base Unit parameters ---------------------------------------*/
+ if(IS_TIM_CC3_INSTANCE(TIMx) != RESET)
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+ tmpcr1 |= Structure->CounterMode;
+ }
+
+ if(IS_TIM_CC1_INSTANCE(TIMx) != RESET)
+ {
+ /* Set the clock division */
+ tmpcr1 &= ~TIM_CR1_CKD;
+ tmpcr1 |= (uint32_t)Structure->ClockDivision;
+ }
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Auto-reload value */
+ TIMx->ARR = (uint32_t)Structure->Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = (uint32_t)Structure->Prescaler;
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = Structure->RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler
+ and the repetition counter(only for TIM1 and TIM8) value immediately */
+ TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+ * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_ICSelection;
+ }
+ else
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_CCMR1_CC1S_0;
+ }
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 2 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config: The output configuration structure
+ * @retval None
+ */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC2M;
+ tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC2P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 4U);
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC2NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 4U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC2NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2;
+ tmpcr2 &= ~TIM_CR2_OIS2N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 2U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 2U);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief TIM DMA Delay Pulse complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if(hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_ErrorCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Capture complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if(hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_IC_CaptureCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param ChannelState: specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+ assert_param(IS_TIM_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1E << Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelState << Channel);
+}
+
+/**
+ * @brief TIM DMA Period Elapse complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_PeriodElapsedCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Trigger callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_TriggerCallback(htim);
+}
+
+/**
+ * @brief Time Output Compare 1 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config: The output configuration structure
+ * @retval None
+ */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC1M;
+ tmpccmrx &= ~TIM_CCMR1_CC1S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC1P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= OC_Config->OCPolarity;
+
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC1NP;
+ /* Set the Output N Polarity */
+ tmpccer |= OC_Config->OCNPolarity;
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC1NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS1;
+ tmpcr2 &= ~TIM_CR2_OIS1N;
+ /* Set the Output Idle state */
+ tmpcr2 |= OC_Config->OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= OC_Config->OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 3 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config: The output configuration structure
+ * @retval None
+ */
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 3: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC3M;
+ tmpccmrx &= ~TIM_CCMR2_CC3S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC3P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 8U);
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC3NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 8U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC3NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS3;
+ tmpcr2 &= ~TIM_CR2_OIS3N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 4U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 4U);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 4 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config: The output configuration structure
+ * @retval None
+ */
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC4M;
+ tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC4P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 12U);
+
+ /*if((TIMx == TIM1) || (TIMx == TIM8))*/
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS4;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 6U);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 4 configuration
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sSlaveConfig: The slave configuration structure
+ * @retval None
+ */
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ uint32_t tmpsmcr = 0U;
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+
+ }
+ break;
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_ITR0:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR1:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR2:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ default:
+ break;
+ }
+}
+
+
+/**
+ * @brief Configure the Polarity and Filter for TI1.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= (TIM_ICFilter << 4U);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= TIM_ICPolarity;
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+ * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr1 &= ~TIM_CCMR1_CC2S;
+ tmpccmr1 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI2.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= (TIM_ICFilter << 12U);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= (TIM_ICPolarity << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+ * (on channel4 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC3S;
+ tmpccmr2 |= TIM_ICSelection;
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC3F;
+ tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F);
+
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+ tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+ * (on channel3 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC4S;
+ tmpccmr2 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC4F;
+ tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F);
+
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+ tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer ;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ITRx: The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t TIM_ITRx)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source and the slave mode*/
+ tmpsmcr |= TIM_ITRx | TIM_SLAVEMODE_EXTERNAL1;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPRESCALER_DIV1 : ETRP Prescaler OFF.
+ * @arg TIM_ETRPRESCALER_DIV2 : ETRP frequency divided by 2.
+ * @arg TIM_ETRPRESCALER_DIV4 : ETRP frequency divided by 4.
+ * @arg TIM_ETRPRESCALER_DIV8 : ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPOLARITY_INVERTED : active low or falling edge active.
+ * @arg TIM_ETRPOLARITY_NONINVERTED : active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+ uint32_t tmpsmcr = 0U;
+
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1609 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_H
+#define __STM32F4xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources.
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity.
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler.
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state.
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources.
+ This parameter can be a value of @ref TIM_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity.
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler.
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIM_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000U) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x00000000U) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x00000000U) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP ((uint32_t)0x00000000U)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x00000000U)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x00000000U)
+#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x00000000U)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x00000000U)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Output CompareN Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x00000000U)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Output Compare N Idle State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel TIM Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x00000000U)
+#define TIM_CHANNEL_2 ((uint32_t)0x00000004U)
+#define TIM_CHANNEL_3 ((uint32_t)0x00000008U)
+#define TIM_CHANNEL_4 ((uint32_t)0x0000000CU)
+#define TIM_CHANNEL_ALL ((uint32_t)0x00000018U)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 ((uint32_t)0x00000000U) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition TIM Interrupt definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Commutation_Source TIM Commutation Source
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources TIM DMA sources
+ * @{
+ */
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x00000000U)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Source TIM Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x00000001U)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Lock_level TIM Lock level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x00000000U)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input State
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity TIM Break Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x00000000U)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM AOE Bit State
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x00000000U)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode TIM Slave Mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x00000000U)
+#define TIM_SLAVEMODE_RESET ((uint32_t)0x00000004U)
+#define TIM_SLAVEMODE_GATED ((uint32_t)0x00000005U)
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x00000006U)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x00000007U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode
+ * @{
+ */
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x00000080U)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+#define TIM_TS_ITR0 ((uint32_t)0x00000000U)
+#define TIM_TS_ITR1 ((uint32_t)0x00000010U)
+#define TIM_TS_ITR2 ((uint32_t)0x00000020U)
+#define TIM_TS_ITR3 ((uint32_t)0x00000030U)
+#define TIM_TS_TI1F_ED ((uint32_t)0x00000040U)
+#define TIM_TS_TI1FP1 ((uint32_t)0x00000050U)
+#define TIM_TS_TI2FP2 ((uint32_t)0x00000060U)
+#define TIM_TS_ETRF ((uint32_t)0x00000070U)
+#define TIM_TS_NONE ((uint32_t)0x0000FFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x00000000U)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base address
+ * @{
+ */
+#define TIM_DMABASE_CR1 (0x00000000U)
+#define TIM_DMABASE_CR2 (0x00000001U)
+#define TIM_DMABASE_SMCR (0x00000002U)
+#define TIM_DMABASE_DIER (0x00000003U)
+#define TIM_DMABASE_SR (0x00000004U)
+#define TIM_DMABASE_EGR (0x00000005U)
+#define TIM_DMABASE_CCMR1 (0x00000006U)
+#define TIM_DMABASE_CCMR2 (0x00000007U)
+#define TIM_DMABASE_CCER (0x00000008U)
+#define TIM_DMABASE_CNT (0x00000009U)
+#define TIM_DMABASE_PSC (0x0000000AU)
+#define TIM_DMABASE_ARR (0x0000000BU)
+#define TIM_DMABASE_RCR (0x0000000CU)
+#define TIM_DMABASE_CCR1 (0x0000000DU)
+#define TIM_DMABASE_CCR2 (0x0000000EU)
+#define TIM_DMABASE_CCR3 (0x0000000FU)
+#define TIM_DMABASE_CCR4 (0x00000010U)
+#define TIM_DMABASE_BDTR (0x00000011U)
+#define TIM_DMABASE_DCR (0x00000012U)
+#define TIM_DMABASE_OR (0x00000013U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000U)
+#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100U)
+#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200U)
+#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300U)
+#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400U)
+#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500U)
+#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600U)
+#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700U)
+#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800U)
+#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900U)
+#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00U)
+#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00U)
+#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00U)
+#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00U)
+#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00U)
+#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00U)
+#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000U)
+#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100U)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index DMA Handle index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000U) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001U) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002U) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003U) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004U) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005U) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006U) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State Channel CC State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x00000001U)
+#define TIM_CCx_DISABLE ((uint32_t)0x00000000U)
+#define TIM_CCxN_ENABLE ((uint32_t)0x00000004U)
+#define TIM_CCxN_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+/** @brief Reset TIM handle state
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+
+/* The Main Output of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U) & TIM_CCER_CC4P)))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
+
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __COUNTER__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __AUTORELOAD__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CKD__: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval None
+ */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * _ Counter overflow/underflow
+ * _ Setting the UG bit
+ * _ Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @brief Sets the TIM Capture x input polarity on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__: TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __POLARITY__: Polarity for TIx source
+ * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+ * @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4.
+ * @retval None
+ */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ do{ \
+ TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+ }while(0)
+/**
+ * @}
+ */
+
+/* Include TIM HAL Extension module */
+#include "stm32f4xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1
+ * @{
+ */
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+
+/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters
+ * @{
+ */
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FFU) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00U) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
+ ((BASE) == TIM_DMABASE_CR2) || \
+ ((BASE) == TIM_DMABASE_SMCR) || \
+ ((BASE) == TIM_DMABASE_DIER) || \
+ ((BASE) == TIM_DMABASE_SR) || \
+ ((BASE) == TIM_DMABASE_EGR) || \
+ ((BASE) == TIM_DMABASE_CCMR1) || \
+ ((BASE) == TIM_DMABASE_CCMR2) || \
+ ((BASE) == TIM_DMABASE_CCER) || \
+ ((BASE) == TIM_DMABASE_CNT) || \
+ ((BASE) == TIM_DMABASE_PSC) || \
+ ((BASE) == TIM_DMABASE_ARR) || \
+ ((BASE) == TIM_DMABASE_RCR) || \
+ ((BASE) == TIM_DMABASE_CCR1) || \
+ ((BASE) == TIM_DMABASE_CCR2) || \
+ ((BASE) == TIM_DMABASE_CCR3) || \
+ ((BASE) == TIM_DMABASE_CCR4) || \
+ ((BASE) == TIM_DMABASE_BDTR) || \
+ ((BASE) == TIM_DMABASE_DCR) || \
+ ((BASE) == TIM_DMABASE_OR))
+
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0x0F)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Mask_Definitions TIM Mask Definition
+ * @{
+ */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMAError(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1873 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer extension peripheral:
+ * + Time Hall Sensor Interface Initialization
+ * + Time Hall Sensor Interface Start
+ * + Time Complementary signal bread and dead time configuration
+ * + Time Master and Slave synchronization configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Extended features #####
+ ==============================================================================
+ [..]
+ The Timer Extension features include:
+ (#) Complementary outputs with programmable dead-time for :
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+ (#) Synchronization circuit to control the timer with external signals and to
+ interconnect several timers together.
+ (#) Break input to put the timer output signals in reset state or in a known state.
+ (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+ positioning purposes
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
+ (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
+ (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
+ Timer Hall Sensor Interface and the commutation event with the corresponding
+ Interrupt and DMA request if needed (Note that One Timer is used to interface
+ with the Hall sensor Interface and another Timer should be used to use
+ the commutation event).
+
+ (#) Activate the TIM peripheral using one of the start functions:
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OC_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIMEx TIMEx
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions
+ * @{
+ */
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Hall Sensor functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure TIM HAL Sensor.
+ (+) De-initialize TIM HAL Sensor.
+ (+) Start the Hall Sensor Interface.
+ (+) Stop the Hall Sensor Interface.
+ (+) Start the Hall Sensor Interface and enable interrupts.
+ (+) Stop the Hall Sensor Interface and disable interrupts.
+ (+) Start the Hall Sensor Interface and enable DMA transfers.
+ (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM Hall Sensor configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
+{
+ TIM_OC_InitTypeDef OC_Config;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIMEx_HallSensor_MspInit(htim);
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
+ TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+ /* Enable the Hall sensor interface (XOR function of the three inputs) */
+ htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+ /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+ /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+ /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+ OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+ OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+ OC_Config.OCMode = TIM_OCMODE_PWM2;
+ OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+ OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+ OC_Config.Pulse = sConfig->Commutation_Delay;
+
+ TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+ /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+ register to 101 */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Hall Sensor interface
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIMEx_HallSensor_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Hall Sensor MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Hall Sensor MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall sensor Interface.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1, 2 and 3
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the capture compare Interrupts 1 event */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts event */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param pData: The destination Buffer address.
+ * @param Length: The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Set the DMA Input Capture 1 Callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream for Capture 1*/
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the capture compare 1 Interrupt */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+ /* Disable the capture compare Interrupts 1 event */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary Output Compare/PWM.
+ (+) Stop the Complementary Output Compare/PWM.
+ (+) Start the Complementary Output Compare/PWM and enable interrupts.
+ (+) Stop the Complementary Output Compare/PWM and disable interrupts.
+ (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
+ (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ if((READ_REG(htim->Instance->CCER) & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+{
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary PWM.
+ (+) Stop the Complementary PWM.
+ (+) Start the Complementary PWM and enable interrupts.
+ (+) Stop the Complementary PWM and disable interrupts.
+ (+) Start the Complementary PWM and enable DMA transfers.
+ (+) Stop the Complementary PWM and disable DMA transfers.
+ (+) Start the Complementary Input Capture measurement.
+ (+) Stop the Complementary Input Capture.
+ (+) Start the Complementary Input Capture and enable interrupts.
+ (+) Stop the Complementary Input Capture and disable interrupts.
+ (+) Start the Complementary Input Capture and enable DMA transfers.
+ (+) Stop the Complementary Input Capture and disable DMA transfers.
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the PWM signal generation on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ if((READ_REG(htim->Instance->CCER) & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode on the
+ * complementary output
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
+ * output
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM One Pulse signal generation on the complementary
+ * output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation on the complementary
+ * output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the commutation event in case of use of the Hall sensor interface.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Configure the TIM commutation event sequence.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource: the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with interrupt.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource: the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation Interrupt Request */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with DMA.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource: the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation DMA Request */
+ /* Set the DMA Commutation Callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError;
+
+ /* Enable the Commutation DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sMasterConfig: pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Reset the MMS Bits */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Reset the MSM Bit */
+ htim->Instance->SMCR &= ~TIM_SMCR_MSM;
+ /* Set or Reset the MSM Bit */
+ htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sBreakDeadTimeConfig: pointer to a TIM_ConfigBreakDeadConfig_TypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+ htim->Instance->BDTR = (uint32_t)sBreakDeadTimeConfig->OffStateRunMode |
+ sBreakDeadTimeConfig->OffStateIDLEMode |
+ sBreakDeadTimeConfig->LockLevel |
+ sBreakDeadTimeConfig->DeadTime |
+ sBreakDeadTimeConfig->BreakState |
+ sBreakDeadTimeConfig->BreakPolarity |
+ sBreakDeadTimeConfig->AutomaticOutput;
+
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM2, TIM5 and TIM11 Remapping input capabilities.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Remap: specifies the TIM input remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default)
+ * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trigger output.
+ * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF.
+ * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF.
+ * @arg TIM_TIM5_GPIO: TIM5 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM_TIM5_LSI: TIM5 CH4 input is connected to LSI clock.
+ * @arg TIM_TIM5_LSE: TIM5 CH4 input is connected to LSE clock.
+ * @arg TIM_TIM5_RTC: TIM5 CH4 input is connected to RTC Output event.
+ * @arg TIM_TIM11_GPIO: TIM11 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM_TIM11_HSE: TIM11 CH4 input is connected to HSE_RTC clock
+ * (HSE divided by a programmable prescaler)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+ __HAL_LOCK(htim);
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap));
+
+ /* Set the Timer remapping configuration */
+ htim->Instance->OR = Remap;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
+ * @brief Extension Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides Extension TIM callback functions:
+ (+) Timer Commutation callback
+ (+) Timer Break callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Hall commutation changed callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_CommutationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Break detection callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_BreakCallback could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions
+ * @brief Extension Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Hall Sensor interface state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief TIM DMA Commutation callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIMEx_CommutationCallback(htim);
+}
+/**
+ * @}
+ */
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @param ChannelNState: specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+ * @retval None
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(TIMx));
+ assert_param(IS_TIM_COMPLEMENTARY_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1NE << Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,344 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of TIM HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_EX_H
+#define __STM32F4xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection.
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection.
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode.
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level.
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State.
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity.
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state.
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+}TIM_BreakDeadTimeConfigTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Remap TIM Remap
+ * @{
+ */
+#define TIM_TIM2_TIM8_TRGO (0x00000000U)
+#define TIM_TIM2_ETH_PTP (0x00000400U)
+#define TIM_TIM2_USBFS_SOF (0x00000800U)
+#define TIM_TIM2_USBHS_SOF (0x00000C00U)
+#define TIM_TIM5_GPIO (0x00000000U)
+#define TIM_TIM5_LSI (0x00000040U)
+#define TIM_TIM5_LSE (0x00000080U)
+#define TIM_TIM5_RTC (0x000000C0U)
+#define TIM_TIM11_GPIO (0x00000000U)
+#define TIM_TIM11_HSE (0x00000002U)
+
+#if defined (STM32F446xx)
+#define TIM_TIM11_SPDIFRX (0x00000001U)
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @defgroup TIMEx_SystemBreakInput TIM System Break Input
+ * @{
+ */
+#define TIM_SYSTEMBREAKINPUT_HARDFAULT ((uint32_t)0x00000001U) /* Core Lockup lock output(Hardfault) is connected to Break Input of TIM1 and TIM8 */
+#define TIM_SYSTEMBREAKINPUT_PVD ((uint32_t)0x00000004U) /* PVD Interrupt is connected to Break Input of TIM1 and TIM8 */
+#define TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD ((uint32_t)0x00000005U) /* Core Lockup lock output(Hardfault) and PVD Interrupt are connected to Break Input of TIM1 and TIM8 */
+/**
+ * @}
+ */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5
+ * @{
+ */
+/* Extension Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6
+ * @{
+ */
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7
+ * @{
+ */
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Private Macros
+ * @{
+ */
+#if defined (STM32F446xx)
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM5_LSI)||\
+ ((TIM_REMAP) == TIM_TIM5_LSE)||\
+ ((TIM_REMAP) == TIM_TIM5_RTC)||\
+ ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM11_SPDIFRX)||\
+ ((TIM_REMAP) == TIM_TIM11_HSE))
+#else
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM5_LSI)||\
+ ((TIM_REMAP) == TIM_TIM5_LSE)||\
+ ((TIM_REMAP) == TIM_TIM5_RTC)||\
+ ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM11_HSE))
+#endif /* STM32F446xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_TIM_SYSTEMBREAKINPUT(BREAKINPUT) (((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT)||\
+ ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_PVD)||\
+ ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD))
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFFU)
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIM Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1957 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_uart.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief UART HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The UART HAL driver can be used as follows:
+
+ (#) Declare a UART_HandleTypeDef handle structure.
+
+ (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API:
+ (##) Enable the USARTx interface clock.
+ (##) UART pins configuration:
+ (+++) Enable the clock for the UART GPIOs.
+ (+++) Configure these UART pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
+ and HAL_UART_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA()
+ and HAL_UART_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required
+ Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA Tx/Rx Stream.
+
+ (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
+ flow control and Mode(Receiver/Transmitter) in the Init structure.
+
+ (#) For the UART asynchronous mode, initialize the UART registers by calling
+ the HAL_UART_Init() API.
+
+ (#) For the UART Half duplex mode, initialize the UART registers by calling
+ the HAL_HalfDuplex_Init() API.
+
+ (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API.
+
+ (#) For the Multi-Processor mode, initialize the UART registers by calling
+ the HAL_MultiProcessor_Init() API.
+
+ [..]
+ (@) The specific UART interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit
+ and receive process.
+
+ [..]
+ (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the
+ low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customized
+ HAL_UART_MspInit() API.
+
+ [..]
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_UART_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_UART_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT()
+ (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT()
+ (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxCpltCallback
+ (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_UART_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA()
+ (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxCpltCallback
+ (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_UART_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_UART_DMAPause()
+ (+) Resume the DMA Transfer using HAL_UART_DMAResume()
+ (+) Stop the DMA Transfer using HAL_UART_DMAStop()
+
+ *** UART HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in UART HAL driver.
+
+ (+) __HAL_UART_ENABLE: Enable the UART peripheral
+ (+) __HAL_UART_DISABLE: Disable the UART peripheral
+ (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not
+ (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag
+ (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt
+ (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt
+ (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not
+
+ [..]
+ (@) You can refer to the UART HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup UART UART
+ * @brief HAL UART module driver
+ * @{
+ */
+#ifdef HAL_UART_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup UART_Private_Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+static void UART_EndTxTransfer(UART_HandleTypeDef *huart);
+static void UART_EndRxTransfer(UART_HandleTypeDef *huart);
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAError(DMA_HandleTypeDef *hdma);
+static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
+static void UART_SetConfig (UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup UART_Exported_Functions UART Exported Functions
+ * @{
+ */
+
+/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+ in asynchronous mode.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length
+ (++) Stop Bit
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ please refer to Reference manual for possible UART frame formats.
+ (++) Hardware flow control
+ (++) Receiver/transmitter modes
+ (++) Over Sampling Method
+ [..]
+ The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs
+ follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor
+ configuration procedures (details for the procedures are available in reference manual (RM0329)).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the UART mode according to the specified parameters in
+ * the UART_InitTypeDef and create the associated handle.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
+ {
+ /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */
+ assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
+ assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl));
+ }
+ else
+ {
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ }
+ assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ UART_SetConfig(huart);
+
+ /* In asynchronous mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+
+ /* Enable the peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Initialize the UART state */
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState= HAL_UART_STATE_READY;
+ huart->RxState= HAL_UART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the half-duplex mode according to the specified
+ * parameters in the UART_InitTypeDef and create the associated handle.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ UART_SetConfig(huart);
+
+ /* In half-duplex mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN));
+
+ /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL);
+
+ /* Enable the peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Initialize the UART state*/
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState= HAL_UART_STATE_READY;
+ huart->RxState= HAL_UART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the LIN mode according to the specified
+ * parameters in the UART_InitTypeDef and create the associated handle.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param BreakDetectLength: Specifies the LIN break detection length.
+ * This parameter can be one of the following values:
+ * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection
+ * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));
+ assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ UART_SetConfig(huart);
+
+ /* In LIN mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN);
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN));
+
+ /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+ SET_BIT(huart->Instance->CR2, USART_CR2_LINEN);
+
+ /* Set the USART LIN Break detection length. */
+ CLEAR_BIT(huart->Instance->CR2, USART_CR2_LBDL);
+ SET_BIT(huart->Instance->CR2, BreakDetectLength);
+
+ /* Enable the peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Initialize the UART state*/
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState= HAL_UART_STATE_READY;
+ huart->RxState= HAL_UART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the Multi-Processor mode according to the specified
+ * parameters in the UART_InitTypeDef and create the associated handle.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param Address: USART address
+ * @param WakeUpMethod: specifies the USART wake-up method.
+ * This parameter can be one of the following values:
+ * @arg UART_WAKEUPMETHOD_IDLELINE: Wake-up by an idle line detection
+ * @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wake-up by an address mark
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod));
+ assert_param(IS_UART_ADDRESS(Address));
+ assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ UART_SetConfig(huart);
+
+ /* In Multi-Processor mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN, HDSEL and IREN bits in the USART_CR3 register */
+ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+
+ /* Clear the USART address */
+ CLEAR_BIT(huart->Instance->CR2, USART_CR2_ADD);
+ /* Set the USART address node */
+ SET_BIT(huart->Instance->CR2, Address);
+
+ /* Set the wake up method by setting the WAKE bit in the CR1 register */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_WAKE);
+ SET_BIT(huart->Instance->CR1, WakeUpMethod);
+
+ /* Enable the peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Initialize the UART state */
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState= HAL_UART_STATE_READY;
+ huart->RxState= HAL_UART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the UART peripheral.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_UART_MspDeInit(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_RESET;
+ huart->RxState = HAL_UART_STATE_RESET;
+
+ /* Process Lock */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief UART MSP Init.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief UART MSP DeInit.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group2 IO operation functions
+ * @brief UART Transmit and Receive functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the UART asynchronous
+ and Half duplex data transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) Non blocking mode: The communication is performed using Interrupts
+ or DMA, these APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated UART IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks
+ will be executed respectively at the end of the transmit or receive process.
+ The HAL_UART_ErrorCallback() user callback will be executed when
+ a communication error is detected.
+
+ (#) Blocking mode APIs are:
+ (++) HAL_UART_Transmit()
+ (++) HAL_UART_Receive()
+
+ (#) Non Blocking mode APIs with Interrupt are:
+ (++) HAL_UART_Transmit_IT()
+ (++) HAL_UART_Receive_IT()
+ (++) HAL_UART_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are:
+ (++) HAL_UART_Transmit_DMA()
+ (++) HAL_UART_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non blocking mode:
+ (++) HAL_UART_TxCpltCallback()
+ (++) HAL_UART_RxCpltCallback()
+ (++) HAL_UART_ErrorCallback()
+
+ [..]
+ (@) In the Half duplex communication, it is forbidden to run the transmit
+ and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX
+ can't be useful.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sends an amount of data in blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ /* Check that a Tx process is not already ongoing */
+ if(huart->gState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_BUSY_TX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+ while(huart->TxXferCount > 0U)
+ {
+ huart->TxXferCount--;
+ if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+ {
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ huart->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ pData +=2U;
+ }
+ else
+ {
+ pData +=1U;
+ }
+ }
+ else
+ {
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ huart->Instance->DR = (*pData++ & (uint8_t)0xFFU);
+ }
+ }
+
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* At end of Tx process, restore huart->gState to Ready */
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ /* Check that a Rx process is not already ongoing */
+ if(huart->RxState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ /* Check the remain data to be received */
+ while(huart->RxXferCount > 0U)
+ {
+ huart->RxXferCount--;
+ if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+ {
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FFU);
+ pData +=2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FFU);
+ pData +=1U;
+ }
+
+ }
+ else
+ {
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007FU);
+ }
+
+ }
+ }
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Tx process is not already ongoing */
+ if(huart->gState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pTxBuffPtr = pData;
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Transmit data register empty Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Rx process is not already ongoing */
+ if(huart->RxState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Parity Error Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the UART Data Register not empty Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Tx process is not already ongoing */
+ if(huart->gState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pTxBuffPtr = pData;
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_BUSY_TX;
+
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmatx->XferErrorCallback = UART_DMAError;
+
+ /* Set the DMA abort callback */
+ huart->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the UART transmit DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the UART CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @note When the UART parity is enabled (PCE = 1) the data received contain the parity bit.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Rx process is not already ongoing */
+ if(huart->RxState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmarx->XferErrorCallback = UART_DMAError;
+
+ /* Set the DMA abort callback */
+ huart->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Enable the UART Parity Error Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the DMA Transfer.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart)
+{
+ uint32_t dmarequest = 0x00U;
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT);
+ if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest)
+ {
+ /* Disable the UART DMA Tx request */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ }
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR);
+ if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest)
+ {
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the UART DMA Rx request */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the DMA Transfer.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ if(huart->gState == HAL_UART_STATE_BUSY_TX)
+ {
+ /* Enable the UART DMA Tx request */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ }
+ if(huart->RxState == HAL_UART_STATE_BUSY_RX)
+ {
+ /* Clear the Overrun flag before resuming the Rx transfer*/
+ __HAL_UART_CLEAR_OREFLAG(huart);
+
+ /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the UART DMA Rx request */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the DMA Transfer.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart)
+{
+ uint32_t dmarequest = 0x00U;
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback()
+ */
+
+ /* Stop UART DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT);
+ if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest)
+ {
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Abort the UART DMA Tx channel */
+ if(huart->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(huart->hdmatx);
+ }
+ UART_EndTxTransfer(huart);
+ }
+
+ /* Stop UART DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR);
+ if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest)
+ {
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the UART DMA Rx channel */
+ if(huart->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(huart->hdmarx);
+ }
+ UART_EndRxTransfer(huart);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles UART interrupt request.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
+{
+ uint32_t isrflags = READ_REG(huart->Instance->SR);
+ uint32_t cr1its = READ_REG(huart->Instance->CR1);
+ uint32_t cr3its = READ_REG(huart->Instance->CR3);
+ uint32_t errorflags = 0x00U;
+ uint32_t dmarequest = 0x00U;
+
+ /* If no error occurs */
+ errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE));
+ if(errorflags == RESET)
+ {
+ /* UART in mode Receiver -------------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ UART_Receive_IT(huart);
+ return;
+ }
+ }
+
+ /* If some errors occur */
+ if((errorflags != RESET) && ((cr3its & (USART_CR3_EIE | USART_CR1_PEIE)) != RESET))
+ {
+ /* UART parity error interrupt occurred ----------------------------------*/
+ if(((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_PE;
+ }
+
+ /* UART noise error interrupt occurred -----------------------------------*/
+ if(((isrflags & USART_SR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_NE;
+ }
+
+ /* UART frame error interrupt occurred -----------------------------------*/
+ if(((isrflags & USART_SR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_FE;
+ }
+
+ /* UART Over-Run interrupt occurred --------------------------------------*/
+ if(((isrflags & USART_SR_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_ORE;
+ }
+
+ /* Call UART Error Call back function if need be --------------------------*/
+ if(huart->ErrorCode != HAL_UART_ERROR_NONE)
+ {
+ /* UART in mode Receiver -----------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ UART_Receive_IT(huart);
+ }
+
+ /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+ consider error as blocking */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR);
+ if(((huart->ErrorCode & HAL_UART_ERROR_ORE) != RESET) || dmarequest)
+ {
+ /* Blocking error : transfer is aborted
+ Set the UART state ready to be able to start again the process,
+ Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+ UART_EndRxTransfer(huart);
+
+ /* Disable the UART DMA Rx request if enabled */
+ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
+ {
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the UART DMA Rx channel */
+ if(huart->hdmarx != NULL)
+ {
+ /* Set the UART DMA Abort callback :
+ will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */
+ huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError;
+ if(HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ huart->hdmarx->XferAbortCallback(huart->hdmarx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_UART_ErrorCallback(huart);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_UART_ErrorCallback(huart);
+ }
+ }
+ else
+ {
+ /* Non Blocking error : transfer could go on.
+ Error is notified to user through user error callback */
+ HAL_UART_ErrorCallback(huart);
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ }
+ }
+ return;
+ } /* End if some error occurs */
+
+ /* UART in mode Transmitter ------------------------------------------------*/
+ if(((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+ {
+ UART_Transmit_IT(huart);
+ return;
+ }
+
+ /* UART in mode Transmitter end --------------------------------------------*/
+ if(((isrflags & USART_SR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+ {
+ UART_EndTransmit_IT(huart);
+ return;
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief UART error callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions
+ * @brief UART control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the UART:
+ (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character.
+ (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode.
+ (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits break characters.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
+{
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Send break characters */
+ SET_BIT(huart->Instance->CR1, USART_CR1_SBK);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enters the UART in mute mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart)
+{
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Enable the USART mute mode by setting the RWU bit in the CR1 register */
+ SET_BIT(huart->Instance->CR1, USART_CR1_RWU);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Exits the UART mute mode: wake up software.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart)
+{
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the UART transmitter and disables the UART receiver.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR1;
+
+ /* Clear TE and RE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
+
+ /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
+ tmpreg |= (uint32_t)USART_CR1_TE;
+
+ /* Write to USART CR1 */
+ WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the UART receiver and disables the UART transmitter.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR1;
+
+ /* Clear TE and RE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
+
+ /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
+ tmpreg |= (uint32_t)USART_CR1_RE;
+
+ /* Write to USART CR1 */
+ WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @brief UART State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to return the State of
+ UART communication process, return Peripheral Errors occurred during communication
+ process
+ (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral.
+ (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the UART state.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL state
+ */
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart)
+{
+ uint32_t temp1= 0x00U, temp2 = 0x00U;
+ temp1 = huart->gState;
+ temp2 = huart->RxState;
+
+ return (HAL_UART_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+ * @brief Return the UART error code
+ * @param huart : pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART.
+ * @retval UART Error Code
+ */
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart)
+{
+ return huart->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA UART transmit process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode*/
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ huart->TxXferCount = 0U;
+
+ /* Disable the DMA transfer for transmit request by setting the DMAT bit
+ in the UART CR3 register */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Enable the UART Transmit Complete Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+
+ }
+ /* DMA Circular mode */
+ else
+ {
+ HAL_UART_TxCpltCallback(huart);
+ }
+}
+
+/**
+ * @brief DMA UART transmit process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_UART_TxHalfCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART receive process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode*/
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ huart->RxXferCount = 0U;
+
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+ }
+ HAL_UART_RxCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_UART_RxHalfCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void UART_DMAError(DMA_HandleTypeDef *hdma)
+{
+ uint32_t dmarequest = 0x00U;
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Stop UART DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT);
+ if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest)
+ {
+ huart->TxXferCount = 0U;
+ UART_EndTxTransfer(huart);
+ }
+
+ /* Stop UART DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR);
+ if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest)
+ {
+ huart->RxXferCount = 0U;
+ UART_EndRxTransfer(huart);
+ }
+
+ huart->ErrorCode |= HAL_UART_ERROR_DMA;
+ HAL_UART_ErrorCallback(huart);
+}
+
+/**
+ * @brief This function handles UART Communication Timeout.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param Flag: specifies the UART flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Tickstart Tick start value
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is set */
+ while((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ huart->gState = HAL_UART_STATE_READY;
+ huart->RxState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion).
+ * @param huart: UART handle.
+ * @retval None
+ */
+static void UART_EndTxTransfer(UART_HandleTypeDef *huart)
+{
+ /* Disable TXEIE and TCIE interrupts */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+ /* At end of Tx process, restore huart->gState to Ready */
+ huart->gState = HAL_UART_STATE_READY;
+}
+
+/**
+ * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion).
+ * @param huart: UART handle.
+ * @retval None
+ */
+static void UART_EndRxTransfer(UART_HandleTypeDef *huart)
+{
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+}
+
+/**
+ * @brief DMA UART communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ huart->RxXferCount = 0;
+ huart->TxXferCount = 0;
+
+ HAL_UART_ErrorCallback(huart);
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode.
+ * @param huart: Pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart)
+{
+ uint16_t* tmp;
+
+ /* Check that a Tx process is ongoing */
+ if(huart->gState == HAL_UART_STATE_BUSY_TX)
+ {
+ if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) huart->pTxBuffPtr;
+ huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ huart->pTxBuffPtr += 2U;
+ }
+ else
+ {
+ huart->pTxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FFU);
+ }
+
+ if(--huart->TxXferCount == 0U)
+ {
+ /* Disable the UART Transmit Complete Interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Enable the UART Transmit Complete Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart)
+{
+ /* Disable the UART Transmit Complete Interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+
+ /* Tx process is ended, restore huart->gState to Ready */
+ huart->gState = HAL_UART_STATE_READY;
+
+ HAL_UART_TxCpltCallback(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
+{
+ uint16_t* tmp;
+
+ /* Check that a Rx process is ongoing */
+ if(huart->RxState == HAL_UART_STATE_BUSY_RX)
+ {
+ if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) huart->pRxBuffPtr;
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FFU);
+ huart->pRxBuffPtr += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FFU);
+ huart->pRxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007FU);
+ }
+ }
+
+ if(--huart->RxXferCount == 0U)
+ {
+ /* Disable the UART Parity Error Interrupt and RXNE interrupt*/
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Rx process is completed, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+
+ HAL_UART_RxCpltCallback(huart);
+
+ return HAL_OK;
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configures the UART peripheral.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+static void UART_SetConfig(UART_HandleTypeDef *huart)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));
+ assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
+ assert_param(IS_UART_PARITY(huart->Init.Parity));
+ assert_param(IS_UART_MODE(huart->Init.Mode));
+
+ /*-------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR2;
+
+ /* Clear STOP[13:12] bits */
+ tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);
+
+ /* Configure the UART Stop Bits: Set STOP[13:12] bits according to huart->Init.StopBits value */
+ tmpreg |= (uint32_t)huart->Init.StopBits;
+
+ /* Write to USART CR2 */
+ WRITE_REG(huart->Instance->CR2, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR1;
+
+ /* Clear M, PCE, PS, TE and RE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+ USART_CR1_RE | USART_CR1_OVER8));
+
+ /* Configure the UART Word Length, Parity and mode:
+ Set the M bits according to huart->Init.WordLength value
+ Set PCE and PS bits according to huart->Init.Parity value
+ Set TE and RE bits according to huart->Init.Mode value
+ Set OVER8 bit according to huart->Init.OverSampling value */
+ tmpreg |= (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling;
+
+ /* Write to USART CR1 */
+ WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR3;
+
+ /* Clear CTSE and RTSE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
+
+ /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */
+ tmpreg |= huart->Init.HwFlowCtl;
+
+ /* Write to USART CR3 */
+ WRITE_REG(huart->Instance->CR3, (uint32_t)tmpreg);
+
+ /* Check the Over Sampling */
+ if(huart->Init.OverSampling == UART_OVERSAMPLING_8)
+ {
+ /*-------------------------- USART BRR Configuration ---------------------*/
+ if((huart->Instance == USART1) || (huart->Instance == USART6))
+ {
+ huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
+ }
+ else
+ {
+ huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
+ }
+ }
+ else
+ {
+ /*-------------------------- USART BRR Configuration ---------------------*/
+ if((huart->Instance == USART1) || (huart->Instance == USART6))
+ {
+ huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
+ }
+ else
+ {
+ huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_UART_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,784 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_UART_H
+#define __STM32F4xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
+ Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+}UART_InitTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ * @note HAL UART State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains UART state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized. HAL UART Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+ HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+ HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
+ Value is allowed for gState only */
+ HAL_UART_STATE_ERROR = 0xE0U /*!< Error
+ Value is allowed for gState only */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< UART registers base address */
+
+ UART_InitTypeDef Init; /*!< UART communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /*!< UART Error code */
+
+}UART_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported constants
+ * @{
+ */
+
+/** @defgroup UART_Error_Code UART Error Code
+ * @brief UART Error Code
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Word_Length UART Word Length
+ * @{
+ */
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000U)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x00000000U)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x00000000U)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x00000000U)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x00000000U)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000U)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000U)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_functions UART Wakeup Functions
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000U)
+#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)0x00000800U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags UART FLags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
+#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
+#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
+#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
+#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
+#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
+#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
+#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
+#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
+#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask (16 bits) in the Y register
+ * - Y : Interrupt source register (2bits)
+ * - 0001: CR1 register
+ * - 0010: CR2 register
+ * - 0011: CR3 register
+ *
+ * @{
+ */
+
+#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+
+#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
+
+#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
+#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+ * @{
+ */
+
+/** @brief Reset UART handle gstate & RxState
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_UART_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
+ } while(0)
+
+/** @brief Flushes the UART DR register
+ * @param __HANDLE__: specifies the UART Handle.
+ */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg UART_FLAG_LBD: LIN Break detection flag
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: Overrun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified UART pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg UART_FLAG_LBD: LIN Break detection flag.
+ * @arg UART_FLAG_TC: Transmission Complete flag.
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the UART PE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the UART FE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART NE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART IDLE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enable the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define UART_IT_MASK ((uint32_t)0x0000FFFFU)
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
+/** @brief Disable the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
+
+/** @brief Enable CTS flow control
+ * This macro allows to enable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
+ } while(0)
+
+/** @brief Disable CTS flow control
+ * This macro allows to disable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
+ } while(0)
+
+/** @brief Enable RTS flow control
+ * This macro allows to enable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
+ } while(0)
+
+/** @brief Disable RTS flow control
+ * This macro allows to disable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
+ } while(0)
+
+/** @brief macros to enables the UART's one bit sample method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief macros to disables the UART's one bit sample method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UART_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UART_Private_Constants UART Private Constants
+ * @{
+ */
+/** @brief UART interruptions flag mask
+ *
+ */
+#define UART_CR1_REG_INDEX 1U
+#define UART_CR2_REG_INDEX 2U
+#define UART_CR3_REG_INDEX 3U
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+ * @{
+ */
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+#define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3U) == 0x00U) && ((MODE) != (uint32_t)0x00U))
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
+#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
+
+#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
+#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+ = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
+#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
+ (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \
+ (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
+
+#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
+#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+ = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
+#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
+ ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
+ (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.h~RF3f84dd03.TMP
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.h~RF3f84dd03.TMP Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,784 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_UART_H
+#define __STM32F4xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
+ Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+}UART_InitTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ * @note HAL UART State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains UART state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized. HAL UART Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+ HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+ HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
+ Value is allowed for gState only */
+ HAL_UART_STATE_ERROR = 0xE0U /*!< Error
+ Value is allowed for gState only */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< UART registers base address */
+
+ UART_InitTypeDef Init; /*!< UART communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /*!< UART Error code */
+
+}UART_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported constants
+ * @{
+ */
+
+/** @defgroup UART_Error_Code UART Error Code
+ * @brief UART Error Code
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Word_Length UART Word Length
+ * @{
+ */
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000U)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x00000000U)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x00000000U)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x00000000U)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x00000000U)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000U)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000U)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_functions UART Wakeup Functions
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000U)
+#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)0x00000800U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags UART FLags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
+#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
+#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
+#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
+#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
+#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
+#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
+#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
+#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
+#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask (16 bits) in the Y register
+ * - Y : Interrupt source register (2bits)
+ * - 0001: CR1 register
+ * - 0010: CR2 register
+ * - 0011: CR3 register
+ *
+ * @{
+ */
+
+#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+
+#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
+
+#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
+#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+ * @{
+ */
+
+/** @brief Reset UART handle gstate & RxState
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_UART_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
+ } while(0)
+
+/** @brief Flushes the UART DR register
+ * @param __HANDLE__: specifies the UART Handle.
+ */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg UART_FLAG_LBD: LIN Break detection flag
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: Overrun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified UART pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg UART_FLAG_LBD: LIN Break detection flag.
+ * @arg UART_FLAG_TC: Transmission Complete flag.
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the UART PE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the UART FE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART NE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART IDLE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enable the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define UART_IT_MASK ((uint32_t)0x0000FFFFU)
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
+/** @brief Disable the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
+
+/** @brief Enable CTS flow control
+ * This macro allows to enable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
+ } while(0)
+
+/** @brief Disable CTS flow control
+ * This macro allows to disable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
+ } while(0)
+
+/** @brief Enable RTS flow control
+ * This macro allows to enable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
+ } while(0)
+
+/** @brief Disable RTS flow control
+ * This macro allows to disable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
+ } while(0)
+
+/** @brief macros to enables the UART's one bit sample method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief macros to disables the UART's one bit sample method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UART_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UART_Private_Constants UART Private Constants
+ * @{
+ */
+/** @brief UART interruptions flag mask
+ *
+ */
+#define UART_CR1_REG_INDEX 1U
+#define UART_CR2_REG_INDEX 2U
+#define UART_CR3_REG_INDEX 3U
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+ * @{
+ */
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+#define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3U) == 0x00U) && ((MODE) != (uint32_t)0x00U))
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
+#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
+
+#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
+#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+ = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
+#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
+ (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \
+ (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
+
+#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
+#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+ = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
+#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
+ ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
+ (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2025 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_usart.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief USART HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Universal Synchronous Asynchronous Receiver Transmitter (USART) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The USART HAL driver can be used as follows:
+
+ (#) Declare a USART_HandleTypeDef handle structure.
+ (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit () API:
+ (##) Enable the USARTx interface clock.
+ (##) USART pins configuration:
+ (+++) Enable the clock for the USART GPIOs.
+ (+++) Configure these USART pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(),
+ HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA()
+ HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+ (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
+ flow control and Mode(Receiver/Transmitter) in the husart Init structure.
+
+ (#) Initialize the USART registers by calling the HAL_USART_Init() API:
+ (++) These APIs configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customized HAL_USART_MspInit(&husart) API.
+
+ -@@- The specific USART interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_USART_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_USART_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_USART_Transmit_IT()
+ (+) At transmission end of transfer HAL_USART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_USART_Receive_IT()
+ (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxCpltCallback
+ (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_USART_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_USART_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_USART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_USART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_USART_Receive_DMA()
+ (+) At reception end of half transfer HAL_USART_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxCpltCallback
+ (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_USART_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_USART_DMAPause()
+ (+) Resume the DMA Transfer using HAL_USART_DMAResume()
+ (+) Stop the DMA Transfer using HAL_USART_DMAStop()
+
+ *** USART HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in USART HAL driver.
+
+ (+) __HAL_USART_ENABLE: Enable the USART peripheral
+ (+) __HAL_USART_DISABLE: Disable the USART peripheral
+ (+) __HAL_USART_GET_FLAG : Check whether the specified USART flag is set or not
+ (+) __HAL_USART_CLEAR_FLAG : Clear the specified USART pending flag
+ (+) __HAL_USART_ENABLE_IT: Enable the specified USART interrupt
+ (+) __HAL_USART_DISABLE_IT: Disable the specified USART interrupt
+
+ [..]
+ (@) You can refer to the USART HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup USART USART
+ * @brief HAL USART Synchronous module driver
+ * @{
+ */
+#ifdef HAL_USART_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup USART_Private_Constants
+ * @{
+ */
+#define DUMMY_DATA 0xFFFFU
+#define USART_TIMEOUT_VALUE 22000U
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup USART_Private_Functions
+ * @{
+ */
+static void USART_EndTxTransfer(USART_HandleTypeDef *husart);
+static void USART_EndRxTransfer(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart);
+static void USART_SetConfig (USART_HandleTypeDef *husart);
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAError(DMA_HandleTypeDef *hdma);
+static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup USART_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @defgroup USART_Exported_Functions_Group1 USART Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USART
+ in asynchronous and in synchronous modes.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length
+ (++) Stop Bit
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ please refer to Reference manual for possible USART frame formats.
+ (++) USART polarity
+ (++) USART phase
+ (++) USART LastBit
+ (++) Receiver/transmitter modes
+
+ [..]
+ The HAL_USART_Init() function follows the USART synchronous configuration
+ procedure (details for the procedure are available in reference manual (RM0329)).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the USART mode according to the specified
+ * parameters in the USART_InitTypeDef and create the associated handle.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart)
+{
+ /* Check the USART handle allocation */
+ if(husart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_USART_INSTANCE(husart->Instance));
+
+ if(husart->State == HAL_USART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ husart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_USART_MspInit(husart);
+ }
+
+ husart->State = HAL_USART_STATE_BUSY;
+
+ /* Set the USART Communication parameters */
+ USART_SetConfig(husart);
+
+ /* In USART mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register
+ - HDSEL, SCEN and IREN bits in the USART_CR3 register */
+ CLEAR_BIT(husart->Instance->CR2, USART_CR2_LINEN);
+ CLEAR_BIT(husart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+
+ /* Enable the Peripheral */
+ __HAL_USART_ENABLE(husart);
+
+ /* Initialize the USART state */
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State= HAL_USART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the USART peripheral.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart)
+{
+ /* Check the USART handle allocation */
+ if(husart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_USART_INSTANCE(husart->Instance));
+
+ husart->State = HAL_USART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_USART_DISABLE(husart);
+
+ /* DeInit the low level hardware */
+ HAL_USART_MspDeInit(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USART MSP Init.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_MspInit(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USART MSP DeInit.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions_Group2 IO operation functions
+ * @brief USART Transmit and Receive functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the USART synchronous
+ data transfers.
+
+ [..]
+ The USART supports master mode only: it cannot receive or send data related to an input
+ clock (SCLK is always an output).
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode: The communication is performed using Interrupts
+ or DMA, These API's return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated USART IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback()
+ user callbacks
+ will be executed respectively at the end of the transmit or Receive process
+ The HAL_USART_ErrorCallback() user callback will be executed when a communication
+ error is detected
+
+ (#) Blocking mode APIs are :
+ (++) HAL_USART_Transmit() in simplex mode
+ (++) HAL_USART_Receive() in full duplex receive only
+ (++) HAL_USART_TransmitReceive() in full duplex mode
+
+ (#) Non Blocking mode APIs with Interrupt are :
+ (++) HAL_USART_Transmit_IT()in simplex mode
+ (++) HAL_USART_Receive_IT() in full duplex receive only
+ (++) HAL_USART_TransmitReceive_IT() in full duplex mode
+ (++) HAL_USART_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_USART_Transmit_DMA()in simplex mode
+ (++) HAL_USART_Receive_DMA() in full duplex receive only
+ (++) HAL_USART_TransmitReceie_DMA() in full duplex mode
+ (++) HAL_USART_DMAPause()
+ (++) HAL_USART_DMAResume()
+ (++) HAL_USART_DMAStop()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_USART_TxHalfCpltCallback()
+ (++) HAL_USART_TxCpltCallback()
+ (++) HAL_USART_RxHalfCpltCallback()
+ (++) HAL_USART_RxCpltCallback()
+ (++) HAL_USART_ErrorCallback()
+ (++) HAL_USART_TxRxCpltCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Simplex Send an amount of data in blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+ while(husart->TxXferCount > 0U)
+ {
+ husart->TxXferCount--;
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ /* Wait for TC flag in order to write data in DR */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pTxData;
+ husart->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ pTxData += 2U;
+ }
+ else
+ {
+ pTxData += 1U;
+ }
+ }
+ else
+ {
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ husart->Instance->DR = (*pTxData++ & (uint8_t)0xFFU);
+ }
+ }
+
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Receive an amount of data in blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pRxData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ husart->RxXferSize = Size;
+ husart->RxXferCount = Size;
+ /* Check the remain data to be received */
+ while(husart->RxXferCount > 0U)
+ {
+ husart->RxXferCount--;
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Send dummy byte in order to generate clock */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FFU);
+
+ /* Wait for RXNE Flag */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pRxData ;
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FFU);
+ pRxData +=2;
+ }
+ else
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FFU);
+ pRxData +=1;
+ }
+ }
+ else
+ {
+ /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send Dummy Byte in order to generate clock */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FFU);
+
+ /* Wait until RXNE flag is set to receive the byte */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ /* Receive data */
+ *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ /* Receive data */
+ *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007FU);
+ }
+
+ }
+ }
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Send receive an amount of data in full-duplex mode (blocking mode).
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data transmitted buffer
+ * @param pRxData: Pointer to data received buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ husart->RxXferSize = Size;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+ husart->RxXferCount = Size;
+
+ /* Check the remain data to be received */
+ while(husart->TxXferCount > 0U)
+ {
+ husart->TxXferCount--;
+ husart->RxXferCount--;
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ /* Wait for TC flag in order to write data in DR */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pTxData;
+ husart->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ pTxData += 2U;
+ }
+ else
+ {
+ pTxData += 1U;
+ }
+
+ /* Wait for RXNE Flag */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pRxData ;
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FFU);
+ pRxData += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FFU);
+ pRxData += 1U;
+ }
+ }
+ else
+ {
+ /* Wait for TC flag in order to write data in DR */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ husart->Instance->DR = (*pTxData++ & (uint8_t)0x00FFU);
+
+ /* Wait for RXNE Flag */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ /* Receive data */
+ *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ /* Receive data */
+ *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007FU);
+ }
+ }
+ }
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Simplex Send an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ * @note The USART errors are not managed to avoid the overrun error.
+ */
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX;
+
+ /* The USART Error Interrupts: (Frame error, Noise error, Overrun error)
+ are not managed by the USART transmit process to avoid the overrun interrupt
+ when the USART mode is configured for transmit and receive "USART_MODE_TX_RX"
+ to benefit for the frame error and noise interrupts the USART mode should be
+ configured only for transmit "USART_MODE_TX"
+ The __HAL_USART_ENABLE_IT(husart, USART_IT_ERR) can be used to enable the Frame error,
+ Noise error interrupt */
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Transmit Data Register Empty Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Simplex Receive an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pRxData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->RxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Data Register not empty Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Enable the USART Parity Error Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* Send dummy byte in order to generate the clock for the slave to send data */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FFU);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data transmitted buffer
+ * @param pRxData: Pointer to data received buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->RxXferCount = Size;
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Data Register not empty Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Enable the USART Parity Error Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the USART Transmit Data Register Empty Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Simplex Send an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX;
+
+ /* Set the USART DMA transfer complete callback */
+ husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+ /* Set the DMA error callback */
+ husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+ /* Set the DMA abort callback */
+ husart->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the USART transmit DMA Stream */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Receive an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pRxData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ * @note The USART DMA transmit stream must be configured in order to generate the clock for the slave.
+ * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
+ */
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->pTxBuffPtr = pRxData;
+ husart->TxXferSize = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Set the USART DMA Rx transfer complete callback */
+ husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+ /* Set the USART DMA Rx transfer error callback */
+ husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+ /* Set the DMA abort callback */
+ husart->hdmarx->XferAbortCallback = NULL;
+
+ /* Set the USART Tx DMA transfer complete callback as NULL because the communication closing
+ is performed in DMA reception complete callback */
+ husart->hdmatx->XferHalfCpltCallback = NULL;
+ husart->hdmatx->XferCpltCallback = NULL;
+
+ /* Set the DMA error callback */
+ husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ husart->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the USART receive DMA Stream */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Enable the USART transmit DMA Stream: the transmit stream is used in order
+ to generate in the non-blocking mode the clock to the slave device,
+ this mode isn't a simplex receive mode but a full-duplex receive one */
+ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
+
+ /* Clear the Overrun flag just before enabling the DMA Rx request: mandatory for the second transfer
+ when using the USART in circular mode */
+ __HAL_USART_CLEAR_OREFLAG(husart);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Parity Error Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data transmitted buffer
+ * @param pRxData: Pointer to data received buffer
+ * @param Size: Amount of data to be received
+ * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+ /* Set the USART DMA Rx transfer complete callback */
+ husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+ /* Set the USART DMA Tx transfer complete callback */
+ husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+ /* Set the USART DMA Tx transfer error callback */
+ husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+ /* Set the USART DMA Rx transfer error callback */
+ husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+ /* Set the DMA abort callback */
+ husart->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the USART receive DMA Stream */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Enable the USART transmit DMA Stream */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC);
+
+ /* Clear the Overrun flag: mandatory for the second transfer in circular mode */
+ __HAL_USART_CLEAR_OREFLAG(husart);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Parity Error Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the DMA Transfer.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart)
+{
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ /* Disable the USART DMA Tx request */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the DMA Transfer.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart)
+{
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ /* Enable the USART DMA Tx request */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the DMA Transfer.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart)
+{
+ uint32_t dmarequest = 0x00U;
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback()
+ */
+
+ /* Stop USART DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT);
+ if((husart->State == HAL_USART_STATE_BUSY_TX) && dmarequest)
+ {
+ USART_EndTxTransfer(husart);
+
+ /* Abort the USART DMA Tx channel */
+ if(husart->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(husart->hdmatx);
+ }
+
+ /* Disable the USART Tx DMA request */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+ }
+
+ /* Stop USART DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR);
+ if((husart->State == HAL_USART_STATE_BUSY_RX) && dmarequest)
+ {
+ USART_EndRxTransfer(husart);
+
+ /* Abort the USART DMA Rx channel */
+ if(husart->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(husart->hdmarx);
+ }
+
+ /* Disable the USART Rx DMA request */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles USART interrupt request.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart)
+{
+ uint32_t isrflags = READ_REG(husart->Instance->SR);
+ uint32_t cr1its = READ_REG(husart->Instance->CR1);
+ uint32_t cr3its = READ_REG(husart->Instance->CR3);
+ uint32_t errorflags = 0x00U;
+ uint32_t dmarequest = 0x00U;
+
+ /* If no error occurs */
+ errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE));
+ if(errorflags == RESET)
+ {
+ /* USART in mode Receiver -------------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ USART_Receive_IT(husart);
+ }
+ else
+ {
+ USART_TransmitReceive_IT(husart);
+ }
+ return;
+ }
+ }
+ /* If some errors occur */
+ if((errorflags != RESET) && ((cr3its & (USART_CR3_EIE | USART_CR1_PEIE)) != RESET))
+ {
+ /* USART parity error interrupt occurred ----------------------------------*/
+ if(((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+ {
+ husart->ErrorCode |= HAL_USART_ERROR_PE;
+ }
+
+ /* USART noise error interrupt occurred --------------------------------*/
+ if(((isrflags & USART_SR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ husart->ErrorCode |= HAL_USART_ERROR_NE;
+ }
+
+ /* USART frame error interrupt occurred --------------------------------*/
+ if(((isrflags & USART_SR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ husart->ErrorCode |= HAL_USART_ERROR_FE;
+ }
+
+ /* USART Over-Run interrupt occurred -----------------------------------*/
+ if(((isrflags & USART_SR_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ husart->ErrorCode |= HAL_USART_ERROR_ORE;
+ }
+
+ if(husart->ErrorCode != HAL_USART_ERROR_NONE)
+ {
+ /* USART in mode Receiver -----------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ USART_Receive_IT(husart);
+ }
+ else
+ {
+ USART_TransmitReceive_IT(husart);
+ }
+ }
+ /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+ consider error as blocking */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR);
+ if(((husart->ErrorCode & HAL_USART_ERROR_ORE) != RESET) || dmarequest)
+ {
+ /* Set the USART state ready to be able to start again the process,
+ Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+ USART_EndRxTransfer(husart);
+
+ /* Disable the USART DMA Rx request if enabled */
+ if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR))
+ {
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the USART DMA Rx channel */
+ if(husart->hdmarx != NULL)
+ {
+ /* Set the USART DMA Abort callback :
+ will lead to call HAL_USART_ErrorCallback() at end of DMA abort procedure */
+ husart->hdmarx->XferAbortCallback = USART_DMAAbortOnError;
+
+ if(HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ husart->hdmarx->XferAbortCallback(husart->hdmarx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_USART_ErrorCallback(husart);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_USART_ErrorCallback(husart);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_USART_ErrorCallback(husart);
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ }
+ }
+ return;
+ }
+
+ /* USART in mode Transmitter -----------------------------------------------*/
+ if(((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ USART_Transmit_IT(husart);
+ }
+ else
+ {
+ USART_TransmitReceive_IT(husart);
+ }
+ return;
+ }
+
+ /* USART in mode Transmitter (transmission end) ----------------------------*/
+ if(((isrflags & USART_SR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+ {
+ USART_EndTransmit_IT(husart);
+ return;
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx/Rx Transfers completed callback for the non-blocking process.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USART error callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief USART State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to return the State of
+ USART communication
+ process, return Peripheral Errors occurred during communication process
+ (+) HAL_USART_GetState() API can be helpful to check in run-time the state
+ of the USART peripheral.
+ (+) HAL_USART_GetError() check in run-time errors that could be occurred during
+ communication.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the USART state.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL state
+ */
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart)
+{
+ return husart->State;
+}
+
+/**
+ * @brief Return the USART error code
+ * @param husart : pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART.
+ * @retval USART Error Code
+ */
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart)
+{
+ return husart->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA USART transmit process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ husart->TxXferCount = 0U;
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ /* Disable the DMA transfer for transmit request by resetting the DMAT bit
+ in the USART CR3 register */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Enable the USART Transmit Complete Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_TCIE);
+ }
+ }
+ /* DMA Circular mode */
+ else
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ HAL_USART_TxCpltCallback(husart);
+ }
+ }
+}
+
+/**
+ * @brief DMA USART transmit process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_USART_TxHalfCpltCallback(husart);
+}
+
+/**
+ * @brief DMA USART receive process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ husart->RxXferCount = 0x00U;
+
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit
+ in the USART CR3 register */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+
+ husart->State= HAL_USART_STATE_READY;
+ HAL_USART_RxCpltCallback(husart);
+ }
+ /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
+ else
+ {
+ /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit
+ in the USART CR3 register */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ husart->State= HAL_USART_STATE_READY;
+ HAL_USART_TxRxCpltCallback(husart);
+ }
+ }
+ /* DMA circular mode */
+ else
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ HAL_USART_RxCpltCallback(husart);
+ }
+ /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
+ else
+ {
+ HAL_USART_TxRxCpltCallback(husart);
+ }
+ }
+}
+
+/**
+ * @brief DMA USART receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_USART_RxHalfCpltCallback(husart);
+}
+
+/**
+ * @brief DMA USART communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void USART_DMAError(DMA_HandleTypeDef *hdma)
+{
+ uint32_t dmarequest = 0x00U;
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ husart->RxXferCount = 0x00U;
+ husart->TxXferCount = 0x00U;
+
+ /* Stop USART DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT);
+ if((husart->State == HAL_USART_STATE_BUSY_TX) && dmarequest)
+ {
+ USART_EndTxTransfer(husart);
+ }
+
+ /* Stop USART DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR);
+ if((husart->State == HAL_USART_STATE_BUSY_RX) && dmarequest)
+ {
+ USART_EndRxTransfer(husart);
+ }
+
+ husart->ErrorCode |= HAL_USART_ERROR_DMA;
+ husart->State= HAL_USART_STATE_READY;
+
+ HAL_USART_ErrorCallback(husart);
+}
+
+/**
+ * @brief This function handles USART Communication Timeout.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param Flag: specifies the USART flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Tickstart: Tick start value.
+ * @param Timeout: Timeout duration.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is set */
+ while((__HAL_USART_GET_FLAG(husart, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ /* Disable the USART Transmit Complete Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Disable the USART RXNE Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the USART Parity Error Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ husart->State= HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief End ongoing Tx transfer on USART peripheral (following error detection or Transmit completion).
+ * @param husart: USART handle.
+ * @retval None
+ */
+static void USART_EndTxTransfer(USART_HandleTypeDef *husart)
+{
+ /* Disable TXEIE and TCIE interrupts */
+ CLEAR_BIT(husart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+ /* At end of Tx process, restore husart->State to Ready */
+ husart->State = HAL_USART_STATE_READY;
+}
+
+/**
+ * @brief End ongoing Rx transfer on USART peripheral (following error detection or Reception completion).
+ * @param husart: USART handle.
+ * @retval None
+ */
+static void USART_EndRxTransfer(USART_HandleTypeDef *husart)
+{
+ /* Disable RXNE, PE and ERR interrupts */
+ CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* At end of Rx process, restore husart->State to Ready */
+ husart->State = HAL_USART_STATE_READY;
+}
+
+/**
+ * @brief DMA USART communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ husart->RxXferCount = 0x00U;
+ husart->TxXferCount = 0x00U;
+
+ HAL_USART_ErrorCallback(husart);
+}
+
+/**
+ * @brief Simplex Send an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ * @note The USART errors are not managed to avoid the overrun error.
+ */
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart)
+{
+ uint16_t* tmp;
+
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) husart->pTxBuffPtr;
+ husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ husart->pTxBuffPtr += 2U;
+ }
+ else
+ {
+ husart->pTxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FFU);
+ }
+
+ if(--husart->TxXferCount == 0U)
+ {
+ /* Disable the USART Transmit data register empty Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Enable the USART Transmit Complete Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_TCIE);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart)
+{
+ /* Disable the USART Transmit Complete Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_TCIE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ husart->State = HAL_USART_STATE_READY;
+
+ HAL_USART_TxCpltCallback(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Simplex Receive an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart)
+{
+ uint16_t* tmp;
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) husart->pRxBuffPtr;
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FFU);
+ husart->pRxBuffPtr += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FFU);
+ husart->pRxBuffPtr += 1U;
+ }
+ if(--husart->RxXferCount != 0x00U)
+ {
+ /* Send dummy byte in order to generate the clock for the slave to send the next data */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FFU);
+ }
+ }
+ else
+ {
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007FU);
+ }
+
+ if(--husart->RxXferCount != 0x00U)
+ {
+ /* Send dummy byte in order to generate the clock for the slave to send the next data */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FFU);
+ }
+ }
+
+ if(husart->RxXferCount == 0U)
+ {
+ /* Disable the USART RXNE Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the USART Parity Error Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ husart->State = HAL_USART_STATE_READY;
+ HAL_USART_RxCpltCallback(husart);
+
+ return HAL_OK;
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart)
+{
+ uint16_t* tmp;
+
+ if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
+ {
+ if(husart->TxXferCount != 0x00U)
+ {
+ if(__HAL_USART_GET_FLAG(husart, USART_FLAG_TXE) != RESET)
+ {
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) husart->pTxBuffPtr;
+ husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ husart->pTxBuffPtr += 2U;
+ }
+ else
+ {
+ husart->pTxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FFU);
+ }
+ husart->TxXferCount--;
+
+ /* Check the latest data transmitted */
+ if(husart->TxXferCount == 0U)
+ {
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+ }
+ }
+ }
+
+ if(husart->RxXferCount != 0x00U)
+ {
+ if(__HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE) != RESET)
+ {
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) husart->pRxBuffPtr;
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FFU);
+ husart->pRxBuffPtr += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FFU);
+ husart->pRxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007FU);
+ }
+ }
+ husart->RxXferCount--;
+ }
+ }
+
+ /* Check the latest data received */
+ if(husart->RxXferCount == 0U)
+ {
+ /* Disable the USART RXNE Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the USART Parity Error Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ husart->State = HAL_USART_STATE_READY;
+
+ HAL_USART_TxRxCpltCallback(husart);
+
+ return HAL_OK;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configures the USART pferipheral.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+static void USART_SetConfig(USART_HandleTypeDef *husart)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_USART_INSTANCE(husart->Instance));
+ assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity));
+ assert_param(IS_USART_PHASE(husart->Init.CLKPhase));
+ assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit));
+ assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate));
+ assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength));
+ assert_param(IS_USART_STOPBITS(husart->Init.StopBits));
+ assert_param(IS_USART_PARITY(husart->Init.Parity));
+ assert_param(IS_USART_MODE(husart->Init.Mode));
+
+ /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the
+ receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */
+ CLEAR_BIT(husart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+
+ /*---------------------------- USART CR2 Configuration ---------------------*/
+ tmpreg = husart->Instance->CR2;
+ /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP));
+ /* Configure the USART Clock, CPOL, CPHA and LastBit -----------------------*/
+ /* Set CPOL bit according to husart->Init.CLKPolarity value */
+ /* Set CPHA bit according to husart->Init.CLKPhase value */
+ /* Set LBCL bit according to husart->Init.CLKLastBit value */
+ /* Set Stop Bits: Set STOP[13:12] bits according to husart->Init.StopBits value */
+ tmpreg |= (uint32_t)(USART_CLOCK_ENABLE| husart->Init.CLKPolarity |
+ husart->Init.CLKPhase| husart->Init.CLKLastBit | husart->Init.StopBits);
+ /* Write to USART CR2 */
+ WRITE_REG(husart->Instance->CR2, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = husart->Instance->CR1;
+
+ /* Clear M, PCE, PS, TE, RE and OVER8 bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+ USART_CR1_RE | USART_CR1_OVER8));
+
+ /* Configure the USART Word Length, Parity and mode:
+ Set the M bits according to husart->Init.WordLength value
+ Set PCE and PS bits according to husart->Init.Parity value
+ Set TE and RE bits according to husart->Init.Mode value
+ Force OVER8 bit to 1 in order to reach the max USART frequencies */
+ tmpreg |= (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8;
+
+ /* Write to USART CR1 */
+ WRITE_REG(husart->Instance->CR1, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* Clear CTSE and RTSE bits */
+ CLEAR_BIT(husart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE));
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ if((husart->Instance == USART1) || (husart->Instance == USART6))
+ {
+ husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK2Freq(), husart->Init.BaudRate);
+ }
+ else
+ {
+ husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK1Freq(), husart->Init.BaudRate);
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_USART_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,588 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_usart.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_USART_H
+#define __STM32F4xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+ * @{
+ */
+
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_USART_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04U /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ USART_InitTypeDef Init; /* Usart communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to Usart Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* Usart Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /* Usart Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to Usart Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* Usart Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /* Usart Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* Usart Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* Usart Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_USART_StateTypeDef State; /* Usart communication state */
+
+ __IO uint32_t ErrorCode; /* USART Error code */
+
+}USART_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants USART Exported Constants
+ * @{
+ */
+
+/** @defgroup USART_Error_Code USART Error Code
+ * @brief USART Error Code
+ * @{
+ */
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Word_Length USART Word Length
+ * @{
+ */
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000U)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits USART Number of Stop Bits
+ * @{
+ */
+#define USART_STOPBITS_1 ((uint32_t)0x00000000U)
+#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity USART Parity
+ * @{
+ */
+#define USART_PARITY_NONE ((uint32_t)0x00000000U)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode USART Mode
+ * @{
+ */
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock USART Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLE ((uint32_t)0x00000000U)
+#define USART_CLOCK_ENABLE ((uint32_t)USART_CR2_CLKEN)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity USART Clock Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW ((uint32_t)0x00000000U)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase USART Clock Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE ((uint32_t)0x00000000U)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit USART Last Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE ((uint32_t)0x00000000U)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+/**
+ * @}
+ */
+
+/** @defgroup USART_NACK_State USART NACK State
+ * @{
+ */
+#define USART_NACK_ENABLE ((uint32_t)USART_CR3_NACK)
+#define USART_NACK_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags USART Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define USART_FLAG_TXE ((uint32_t)0x00000080U)
+#define USART_FLAG_TC ((uint32_t)0x00000040U)
+#define USART_FLAG_RXNE ((uint32_t)0x00000020U)
+#define USART_FLAG_IDLE ((uint32_t)0x00000010U)
+#define USART_FLAG_ORE ((uint32_t)0x00000008U)
+#define USART_FLAG_NE ((uint32_t)0x00000004U)
+#define USART_FLAG_FE ((uint32_t)0x00000002U)
+#define USART_FLAG_PE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ *
+ * @{
+ */
+#define USART_IT_PE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define USART_IT_TXE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define USART_IT_TC ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define USART_IT_RXNE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define USART_IT_IDLE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+
+#define USART_IT_LBD ((uint32_t)(USART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
+
+#define USART_IT_CTS ((uint32_t)(USART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
+#define USART_IT_ERR ((uint32_t)(USART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+/** @brief Reset USART handle state
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: Overrun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg USART_FLAG_TC: Transmission Complete flag.
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the USART PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the USART FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified USART interrupts.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK)))
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK)))
+
+/** @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK))
+
+/** @brief Macro to enable the USART's one bit sample method
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Macro to disable the USART's one bit sample method
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_USART_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_USART_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup USART_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup USART_Private_Constants USART Private Constants
+ * @{
+ */
+/** @brief USART interruptions flag mask
+ *
+ */
+#define USART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
+
+#define USART_CR1_REG_INDEX 1U
+#define USART_CR2_REG_INDEX 2U
+#define USART_CR3_REG_INDEX 3U
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup USART_Private_Macros USART Private Macros
+ * @{
+ */
+#define IS_USART_NACK_STATE(NACK) (((NACK) == USART_NACK_ENABLE) || \
+ ((NACK) == USART_NACK_DISABLE))
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+ ((LASTBIT) == USART_LASTBIT_ENABLE))
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLE) || \
+ ((CLOCK) == USART_CLOCK_ENABLE))
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+ ((STOPBITS) == USART_STOPBITS_0_5) || \
+ ((STOPBITS) == USART_STOPBITS_1_5) || \
+ ((STOPBITS) == USART_STOPBITS_2))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+ ((PARITY) == USART_PARITY_EVEN) || \
+ ((PARITY) == USART_PARITY_ODD))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFF3) == 0x00U) && ((MODE) != (uint32_t)0x00U))
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
+
+#define USART_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
+#define USART_DIVMANT(_PCLK_, _BAUD_) (USART_DIV((_PCLK_), (_BAUD_))/100U)
+#define USART_DIVFRAQ(_PCLK_, _BAUD_) (((USART_DIV((_PCLK_), (_BAUD_)) - (USART_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
+#define USART_BRR(_PCLK_, _BAUD_) ((USART_DIVMANT((_PCLK_), (_BAUD_)) << 4U)|(USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup USART_Private_Functions USART Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,314 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_wwdg.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief WWDG HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Window Watchdog (WWDG) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State functions
+ @verbatim
+ ==============================================================================
+ ##### WWDG specific features #####
+ ==============================================================================
+ [..]
+ Once enabled the WWDG generates a system reset on expiry of a programmed
+ time period, unless the program refreshes the counter (downcounter)
+ before reaching 0x3F value (i.e. a reset is generated when the counter
+ value rolls over from 0x40 to 0x3F).
+
+ (+) An MCU reset is also generated if the counter value is refreshed
+ before the counter has reached the refresh window value. This
+ implies that the counter must be refreshed in a limited window.
+ (+) Once enabled the WWDG cannot be disabled except by a system reset.
+ (+) WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
+ reset occurs.
+ (+) The WWDG counter input clock is derived from the APB clock divided
+ by a programmable prescaler.
+ (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler)
+ (+) WWDG timeout (mS) = 1000 * Counter / WWDG clock
+ (+) WWDG Counter refresh is allowed between the following limits :
+ (++) min time (mS) = 1000 * (Counter _ Window) / WWDG clock
+ (++) max time (mS) = 1000 * (Counter _ 0x40) / WWDG clock
+
+ (+) Min-max timeout value at 50 MHz(PCLK1): 81.9 us / 41.9 ms
+
+ (+) The Early Wakeup Interrupt (EWI) can be used if specific safety
+ operations or data logging must be performed before the actual reset is
+ generated. When the downcounter reaches the value 0x40, an EWI interrupt
+ is generated and the corresponding interrupt service routine (ISR) can
+ be used to trigger specific actions (such as communications or data
+ logging), before resetting the device.
+ In some applications, the EWI interrupt can be used to manage a software
+ system check and/or system recovery/graceful degradation, without
+ generating a WWDG reset. In this case, the corresponding interrupt
+ service routine (ISR) should reload the WWDG counter to avoid the WWDG
+ reset, then trigger the required actions.
+ Note:When the EWI interrupt cannot be served, e.g. due to a system lock
+ in a higher priority task, the WWDG reset will eventually be generated.
+
+ (+) Debug mode : When the microcontroller enters debug mode (core halted),
+ the WWDG counter either continues to work normally or stops, depending
+ on DBG_WWDG_STOP configuration bit in DBG module, accessible through
+ __HAL_DBGMCU_FREEZE_WWDG() and __HAL_DBGMCU_UNFREEZE_WWDG() macros
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE().
+
+ (+) Set the WWDG prescaler, refresh window, counter value and Early Wakeup
+ Interrupt mode using using HAL_WWDG_Init() function.
+ This enables WWDG peripheral and the downcounter starts downcounting
+ from given counter value.
+ Init function can be called again to modify all watchdog parameters,
+ however if EWI mode has been set once, it can't be clear until next
+ reset.
+
+ (+) The application program must refresh the WWDG counter at regular
+ intervals during normal operation to prevent an MCU reset using
+ HAL_WWDG_Refresh() function. This operation must occur only when
+ the counter is lower than the window value already programmed.
+
+ (+) if Early Wakeup Interrupt mode is enable an interrupt is generated when
+ the counter reaches 0x40. User can add his own code in weak function
+ HAL_WWDG_EarlyWakeupCallback().
+
+ *** WWDG HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in WWDG HAL driver.
+
+ (+) __HAL_WWDG_GET_IT_SOURCE: Check the selected WWDG's interrupt source.
+ (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status.
+ (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+/** @defgroup WWDG WWDG
+ * @brief WWDG HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Functions WWDG Exported Functions
+ * @{
+ */
+
+/** @defgroup WWDG_Exported_Functions_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and start the WWDG according to the specified parameters
+ in the WWDG_InitTypeDef of associated handle.
+ (+) Initialize the WWDG MSP.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the WWDG according to the specified.
+ * parameters in the WWDG_InitTypeDef of associated handle.
+ * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Check the WWDG handle allocation */
+ if(hwwdg == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
+ assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
+ assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
+ assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));
+ assert_param(IS_WWDG_EWI_MODE(hwwdg->Init.EWIMode));
+
+ /* Init the low level hardware */
+ HAL_WWDG_MspInit(hwwdg);
+
+ /* Set WWDG Counter */
+ WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter));
+
+ /* Set WWDG Prescaler and Window */
+ WRITE_REG(hwwdg->Instance->CFR, (hwwdg->Init.EWIMode | hwwdg->Init.Prescaler | hwwdg->Init.Window));
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the WWDG MSP.
+ * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @note When rewriting this function in user file, mechanism may be added
+ * to avoid multiple initialize when HAL_WWDG_Init function is called
+ * again to change parameters.
+ * @retval None
+ */
+__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hwwdg);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_WWDG_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Refresh the WWDG.
+ (+) Handle WWDG interrupt request and associated function callback.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Refresh the WWDG.
+ * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Write to WWDG CR the WWDG Counter value to refresh with */
+ WRITE_REG(hwwdg->Instance->CR, (hwwdg->Init.Counter));
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle WWDG interrupt request.
+ * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations
+ * or data logging must be performed before the actual reset is generated.
+ * The EWI interrupt is enabled by calling HAL_WWDG_Init function with
+ * EWIMode set to WWDG_EWI_ENABLE.
+ * When the downcounter reaches the value 0x40, and EWI interrupt is
+ * generated and the corresponding Interrupt Service Routine (ISR) can
+ * be used to trigger specific actions (such as communications or data
+ * logging), before resetting the device.
+ * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval None
+ */
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Check if Early Wakeup Interrupt is enable */
+ if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET)
+ {
+ /* Check if WWDG Early Wakeup Interrupt occurred */
+ if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET)
+ {
+ /* Clear the WWDG Early Wakeup flag */
+ __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF);
+
+ /* Early Wakeup callback */
+ HAL_WWDG_EarlyWakeupCallback(hwwdg);
+ }
+ }
+}
+
+/**
+ * @brief WWDG Early Wakeup callback.
+ * @param hwwdg : pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval None
+ */
+__weak void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef* hwwdg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hwwdg);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_WWDG_EarlyWakeupCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_WWDG_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,283 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_WWDG_H
+#define __STM32F4xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Types WWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number Min_Data = 0x40 and Max_Data = 0x7F */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+ uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interupt is enable or not.
+ This parameter can be a value of @ref WWDG_EWI_Mode */
+
+}WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG handle Structure definition
+ */
+typedef struct
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+}WWDG_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
+ * @{
+ */
+#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition WWDG Flag definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler WWDG Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000U) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_EWI_Mode WWDG Early Wakeup Interrupt Mode
+ * @{
+ */
+#define WWDG_EWI_DISABLE 0x00000000u /*!< EWI Disable */
+#define WWDG_EWI_ENABLE WWDG_CFR_EWI /*!< EWI Enable */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Private_Macros WWDG Private Macros
+ * @{
+ */
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
+
+#define IS_WWDG_WINDOW(__WINDOW__) (((__WINDOW__) >= WWDG_CFR_W_6) && ((__WINDOW__) <= WWDG_CFR_W))
+
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= WWDG_CR_T_6) && ((__COUNTER__) <= WWDG_CR_T))
+
+#define IS_WWDG_EWI_MODE(__MODE__) (((__MODE__) == WWDG_EWI_ENABLE) || \
+ ((__MODE__) == WWDG_EWI_DISABLE))
+/**
+ * @}
+ */
+
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Enables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__ specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))
+
+/**
+ * @brief Checks whether the selected WWDG interrupt has occurred or not.
+ * @param __HANDLE__ WWDG handle
+ * @param __INTERRUPT__ specifies the it to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified WWDG flag is set or not.
+ * @param __HANDLE__ WWDG handle
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the WWDG's pending flags.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/** @brief Checks if the specified WWDG interrupt source is enabled or disabled.
+ * @param __HANDLE__: WWDG Handle.
+ * @param __INTERRUPT__: specifies the WWDG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early Wakeup Interrupt
+ * @retval state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup WWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef* hwwdg);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1710 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fmc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FMC Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Flexible Memory Controller (FMC) peripheral memories:
+ * + Initialization/de-initialization functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FMC peripheral features #####
+ ==============================================================================
+ [..] The Flexible memory controller (FMC) includes three memory controllers:
+ (+) The NOR/PSRAM memory controller
+ (+) The NAND/PC Card memory controller
+ (+) The Synchronous DRAM (SDRAM) controller
+
+ [..] The FMC functional block makes the interface with synchronous and asynchronous static
+ memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
+ (+) to translate AHB transactions into the appropriate external device protocol
+ (+) to meet the access time requirements of the external memory devices
+
+ [..] All external memories share the addresses, data and control signals with the controller.
+ Each external device is accessed by means of a unique Chip Select. The FMC performs
+ only one access at a time to an external device.
+ The main features of the FMC controller are the following:
+ (+) Interface with static-memory mapped devices including:
+ (++) Static random access memory (SRAM)
+ (++) Read-only memory (ROM)
+ (++) NOR Flash memory/OneNAND Flash memory
+ (++) PSRAM (4 memory banks)
+ (++) 16-bit PC Card compatible devices
+ (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
+ data
+ (+) Interface with synchronous DRAM (SDRAM) memories
+ (+) Independent Chip Select control for each memory bank
+ (+) Independent configuration for each memory bank
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FMC_LL FMC Low Layer
+ * @brief FMC driver modules
+ * @{
+ */
+
+#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) || defined(HAL_SDRAM_MODULE_ENABLED)
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup FMC_LL_Private_Functions
+ * @{
+ */
+
+/** @addtogroup FMC_LL_NORSRAM
+ * @brief NORSRAM Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NORSRAM device driver #####
+ ==============================================================================
+
+ [..]
+ This driver contains a set of APIs to interface with the FMC NORSRAM banks in order
+ to run the NORSRAM external devices.
+
+ (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit()
+ (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init()
+ (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init()
+ (+) FMC NORSRAM bank extended timing configuration using the function
+ FMC_NORSRAM_Extended_Timing_Init()
+ (+) FMC NORSRAM bank enable/disable write operation using the functions
+ FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable()
+
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC NORSRAM interface
+ (+) De-initialize the FMC NORSRAM interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the FMC_NORSRAM device according to the specified
+ * control parameters in the FMC_NORSRAM_InitTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Init: Pointer to NORSRAM Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef* Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank));
+ assert_param(IS_FMC_MUX(Init->DataAddressMux));
+ assert_param(IS_FMC_MEMORY(Init->MemoryType));
+ assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode));
+ assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity));
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ assert_param(IS_FMC_WRAP_MODE(Init->WrapMode));
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+ assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
+ assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation));
+ assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal));
+ assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode));
+ assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait));
+ assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst));
+ assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock));
+ assert_param(IS_FMC_PAGESIZE(Init->PageSize));
+#if defined (STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo));
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+
+ /* Get the BTCR register value */
+ tmpr = Device->BTCR[Init->NSBank];
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN,
+ WAITEN, EXTMOD, ASYNCWAIT, CPSIZE, CBURSTRW and CCLKEN bits */
+ tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN | FMC_BCR1_MUXEN | FMC_BCR1_MTYP | \
+ FMC_BCR1_MWID | FMC_BCR1_FACCEN | FMC_BCR1_BURSTEN | \
+ FMC_BCR1_WAITPOL | FMC_BCR1_WRAPMOD | FMC_BCR1_WAITCFG | \
+ FMC_BCR1_WREN | FMC_BCR1_WAITEN | FMC_BCR1_EXTMOD | \
+ FMC_BCR1_ASYNCWAIT | FMC_BCR1_CPSIZE | FMC_BCR1_CBURSTRW | \
+ FMC_BCR1_CCLKEN));
+
+ /* Set NORSRAM device control parameters */
+ tmpr |= (uint32_t)(Init->DataAddressMux |\
+ Init->MemoryType |\
+ Init->MemoryDataWidth |\
+ Init->BurstAccessMode |\
+ Init->WaitSignalPolarity |\
+ Init->WrapMode |\
+ Init->WaitSignalActive |\
+ Init->WriteOperation |\
+ Init->WaitSignal |\
+ Init->ExtendedMode |\
+ Init->AsynchronousWait |\
+ Init->PageSize |\
+ Init->WriteBurst |\
+ Init->ContinuousClock);
+#else /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */
+ /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, CPSIZE, WAITCFG, WREN,
+ WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW, CCLKEN and WFDIS bits */
+ tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN | FMC_BCR1_MUXEN | FMC_BCR1_MTYP | \
+ FMC_BCR1_MWID | FMC_BCR1_FACCEN | FMC_BCR1_BURSTEN | \
+ FMC_BCR1_WAITPOL | FMC_BCR1_WAITCFG | FMC_BCR1_CPSIZE | \
+ FMC_BCR1_WREN | FMC_BCR1_WAITEN | FMC_BCR1_EXTMOD | \
+ FMC_BCR1_ASYNCWAIT | FMC_BCR1_CBURSTRW | FMC_BCR1_CCLKEN | \
+ FMC_BCR1_WFDIS));
+
+ /* Set NORSRAM device control parameters */
+ tmpr |= (uint32_t)(Init->DataAddressMux |\
+ Init->MemoryType |\
+ Init->MemoryDataWidth |\
+ Init->BurstAccessMode |\
+ Init->WaitSignalPolarity |\
+ Init->WaitSignalActive |\
+ Init->WriteOperation |\
+ Init->WaitSignal |\
+ Init->ExtendedMode |\
+ Init->AsynchronousWait |\
+ Init->WriteBurst |\
+ Init->ContinuousClock |\
+ Init->PageSize |\
+ Init->WriteFifo);
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+ if(Init->MemoryType == FMC_MEMORY_TYPE_NOR)
+ {
+ tmpr |= (uint32_t)FMC_NORSRAM_FLASH_ACCESS_ENABLE;
+ }
+
+ Device->BTCR[Init->NSBank] = tmpr;
+
+ /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */
+ if((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1))
+ {
+ Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->ContinuousClock);
+ }
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ if(Init->NSBank != FMC_NORSRAM_BANK1)
+ {
+ Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->WriteFifo);
+ }
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the FMC_NORSRAM peripheral
+ * @param Device: Pointer to NORSRAM device instance
+ * @param ExDevice: Pointer to NORSRAM extended mode device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Disable the FMC_NORSRAM device */
+ __FMC_NORSRAM_DISABLE(Device, Bank);
+
+ /* De-initialize the FMC_NORSRAM device */
+ /* FMC_NORSRAM_BANK1 */
+ if(Bank == FMC_NORSRAM_BANK1)
+ {
+ Device->BTCR[Bank] = 0x000030DBU;
+ }
+ /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */
+ else
+ {
+ Device->BTCR[Bank] = 0x000030D2U;
+ }
+
+ Device->BTCR[Bank + 1] = 0x0FFFFFFFU;
+ ExDevice->BWTR[Bank] = 0x0FFFFFFFU;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FMC_NORSRAM Timing according to the specified
+ * parameters in the FMC_NORSRAM_TimingTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Timing: Pointer to NORSRAM Timing structure
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
+ assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+ assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision));
+ assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency));
+ assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Get the BTCR register value */
+ tmpr = Device->BTCR[Bank + 1U];
+
+ /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+ tmpr &= ((uint32_t)~(FMC_BTR1_ADDSET | FMC_BTR1_ADDHLD | FMC_BTR1_DATAST | \
+ FMC_BTR1_BUSTURN | FMC_BTR1_CLKDIV | FMC_BTR1_DATLAT | \
+ FMC_BTR1_ACCMOD));
+
+ /* Set FMC_NORSRAM device timing parameters */
+ tmpr |= (uint32_t)(Timing->AddressSetupTime |\
+ ((Timing->AddressHoldTime) << 4U) |\
+ ((Timing->DataSetupTime) << 8U) |\
+ ((Timing->BusTurnAroundDuration) << 16U) |\
+ (((Timing->CLKDivision) - 1U) << 20U) |\
+ (((Timing->DataLatency) - 2U) << 24U) |\
+ (Timing->AccessMode));
+
+ Device->BTCR[Bank + 1U] = tmpr;
+
+ /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */
+ if(HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN))
+ {
+ tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1U] & ~(((uint32_t)0x0FU) << 20U));
+ tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << 20U);
+ Device->BTCR[FMC_NORSRAM_BANK1 + 1U] = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FMC_NORSRAM Extended mode Timing according to the specified
+ * parameters in the FMC_NORSRAM_TimingTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Timing: Pointer to NORSRAM Timing structure
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode));
+
+ /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+ if(ExtendedMode == FMC_EXTENDED_MODE_ENABLE)
+ {
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device));
+ assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
+ assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+ assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Get the BWTR register value */
+ tmpr = Device->BWTR[Bank];
+
+ /* Clear ADDSET, ADDHLD, DATAST, BUSTURN and ACCMOD bits */
+ tmpr &= ((uint32_t)~(FMC_BWTR1_ADDSET | FMC_BWTR1_ADDHLD | FMC_BWTR1_DATAST | \
+ FMC_BWTR1_BUSTURN | FMC_BWTR1_ACCMOD));
+
+ tmpr |= (uint32_t)(Timing->AddressSetupTime |\
+ ((Timing->AddressHoldTime) << 4U) |\
+ ((Timing->DataSetupTime) << 8U) |\
+ ((Timing->BusTurnAroundDuration) << 16U) |\
+ (Timing->AccessMode));
+
+ Device->BWTR[Bank] = tmpr;
+ }
+ else
+ {
+ Device->BWTR[Bank] = 0x0FFFFFFFU;
+ }
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FMC_NORSRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FMC NORSRAM interface.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Enables dynamically FMC_NORSRAM write operation.
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Enable write operation */
+ Device->BTCR[Bank] |= FMC_WRITE_OPERATION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NORSRAM write operation.
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Disable write operation */
+ Device->BTCR[Bank] &= ~FMC_WRITE_OPERATION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FMC_LL_NAND
+ * @brief NAND Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NAND device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FMC NAND banks in order
+ to run the NAND external devices.
+
+ (+) FMC NAND bank reset using the function FMC_NAND_DeInit()
+ (+) FMC NAND bank control configuration using the function FMC_NAND_Init()
+ (+) FMC NAND bank common space timing configuration using the function
+ FMC_NAND_CommonSpace_Timing_Init()
+ (+) FMC NAND bank attribute space timing configuration using the function
+ FMC_NAND_AttributeSpace_Timing_Init()
+ (+) FMC NAND bank enable/disable ECC correction feature using the functions
+ FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable()
+ (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC()
+
+@endverbatim
+ * @{
+ */
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC NAND interface
+ (+) De-initialize the FMC NAND interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FMC_NAND device according to the specified
+ * control parameters in the FMC_NAND_HandleTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Init: Pointer to NAND Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Init->NandBank));
+ assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
+ assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
+ assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
+
+ /* Get the NAND bank register value */
+ tmpr = Device->PCR;
+
+ /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+ tmpr &= ((uint32_t)~(FMC_PCR_PWAITEN | FMC_PCR_PBKEN | FMC_PCR_PTYP | \
+ FMC_PCR_PWID | FMC_PCR_ECCEN | FMC_PCR_TCLR | \
+ FMC_PCR_TAR | FMC_PCR_ECCPS));
+
+ /* Set NAND device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FMC_PCR_MEMORY_TYPE_NAND |\
+ Init->MemoryDataWidth |\
+ Init->EccComputation |\
+ Init->ECCPageSize |\
+ ((Init->TCLRSetupTime) << 9U) |\
+ ((Init->TARSetupTime) << 13U));
+
+ /* NAND bank registers configuration */
+ Device->PCR = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_NAND Common space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PMEM;
+
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PMEM_MEMSET2 | FMC_PMEM_MEMWAIT2 | FMC_PMEM_MEMHOLD2 | \
+ FMC_PMEM_MEMHIZ2));
+
+ /* Set FMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U)
+ );
+
+ /* NAND bank registers configuration */
+ Device->PMEM = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_NAND Attribute space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Get the NAND bank register value */
+ tmpr = Device->PATT;
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PATT_ATTSET2 | FMC_PATT_ATTWAIT2 | FMC_PATT_ATTHOLD2 | \
+ FMC_PATT_ATTHIZ2));
+
+ /* Set FMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ /* NAND bank registers configuration */
+ Device->PATT = tmpr;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief DeInitializes the FMC_NAND device
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Disable the NAND Bank */
+ __FMC_NAND_DISABLE(Device, Bank);
+
+ /* De-initialize the NAND Bank */
+ /* Set the FMC_NAND_BANK registers to their reset values */
+ Device->PCR = 0x00000018U;
+ Device->SR = 0x00000040U;
+ Device->PMEM = 0xFCFCFCFCU;
+ Device->PATT = 0xFCFCFCFCU;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_FMC_NAND_Group2 Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FMC_NAND Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FMC NAND interface.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Enables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Enable ECC feature */
+ Device->PCR |= FMC_PCR_ECCEN;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Disable ECC feature */
+ Device->PCR &= ~FMC_PCR_ECCEN;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param ECCval: Pointer to ECC value
+ * @param Bank: NAND bank number
+ * @param Timeout: Timeout wait value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until FIFO is empty */
+ while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Get the ECCR register value */
+ *ECCval = (uint32_t)Device->ECCR;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC NAND interface
+ (+) De-initialize the FMC NAND interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the FMC_NAND device according to the specified
+ * control parameters in the FMC_NAND_HandleTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Init: Pointer to NAND Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Init->NandBank));
+ assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
+ assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
+ assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
+
+ if(Init->NandBank == FMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PCR2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PCR3;
+ }
+
+ /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+ tmpr &= ((uint32_t)~(FMC_PCR2_PWAITEN | FMC_PCR2_PBKEN | FMC_PCR2_PTYP | \
+ FMC_PCR2_PWID | FMC_PCR2_ECCEN | FMC_PCR2_TCLR | \
+ FMC_PCR2_TAR | FMC_PCR2_ECCPS));
+
+ /* Set NAND device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FMC_PCR_MEMORY_TYPE_NAND |\
+ Init->MemoryDataWidth |\
+ Init->EccComputation |\
+ Init->ECCPageSize |\
+ ((Init->TCLRSetupTime) << 9U) |\
+ ((Init->TARSetupTime) << 13U));
+
+ if(Init->NandBank == FMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PCR2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PCR3 = tmpr;
+ }
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Initializes the FMC_NAND Common space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PMEM2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PMEM3;
+ }
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PMEM2_MEMSET2 | FMC_PMEM2_MEMWAIT2 | FMC_PMEM2_MEMHOLD2 | \
+ FMC_PMEM2_MEMHIZ2));
+
+ /* Set FMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U)
+ );
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PMEM2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PMEM3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_NAND Attribute space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PATT2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PATT3;
+ }
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PATT2_ATTSET2 | FMC_PATT2_ATTWAIT2 | FMC_PATT2_ATTHOLD2 | \
+ FMC_PATT2_ATTHIZ2));
+
+ /* Set FMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PATT2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PATT3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FMC_NAND device
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Disable the NAND Bank */
+ __FMC_NAND_DISABLE(Device, Bank);
+
+ /* De-initialize the NAND Bank */
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* Set the FMC_NAND_BANK2 registers to their reset values */
+ Device->PCR2 = 0x00000018U;
+ Device->SR2 = 0x00000040U;
+ Device->PMEM2 = 0xFCFCFCFCU;
+ Device->PATT2 = 0xFCFCFCFCU;
+ }
+ /* FMC_Bank3_NAND */
+ else
+ {
+ /* Set the FMC_NAND_BANK3 registers to their reset values */
+ Device->PCR3 = 0x00000018U;
+ Device->SR3 = 0x00000040U;
+ Device->PMEM3 = 0xFCFCFCFCU;
+ Device->PATT3 = 0xFCFCFCFCU;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup FMC_LL_NAND_Private_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FMC_NAND Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FMC NAND interface.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Enables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Enable ECC feature */
+ if(Bank == FMC_NAND_BANK2)
+ {
+ Device->PCR2 |= FMC_PCR2_ECCEN;
+ }
+ else
+ {
+ Device->PCR3 |= FMC_PCR3_ECCEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Disable ECC feature */
+ if(Bank == FMC_NAND_BANK2)
+ {
+ Device->PCR2 &= ~FMC_PCR2_ECCEN;
+ }
+ else
+ {
+ Device->PCR3 &= ~FMC_PCR3_ECCEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param ECCval: Pointer to ECC value
+ * @param Bank: NAND bank number
+ * @param Timeout: Timeout wait value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until FIFO is empty */
+ while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* Get the ECCR2 register value */
+ *ECCval = (uint32_t)Device->ECCR2;
+ }
+ else
+ {
+ /* Get the ECCR3 register value */
+ *ECCval = (uint32_t)Device->ECCR3;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @addtogroup FMC_LL_PCCARD
+ * @brief PCCARD Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use PCCARD device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FMC PCCARD bank in order
+ to run the PCCARD/compact flash external devices.
+
+ (+) FMC PCCARD bank reset using the function FMC_PCCARD_DeInit()
+ (+) FMC PCCARD bank control configuration using the function FMC_PCCARD_Init()
+ (+) FMC PCCARD bank common space timing configuration using the function
+ FMC_PCCARD_CommonSpace_Timing_Init()
+ (+) FMC PCCARD bank attribute space timing configuration using the function
+ FMC_PCCARD_AttributeSpace_Timing_Init()
+ (+) FMC PCCARD bank IO space timing configuration using the function
+ FMC_PCCARD_IOSpace_Timing_Init()
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FMC_LL_PCCARD_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC PCCARD interface
+ (+) De-initialize the FMC PCCARD interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FMC_PCCARD device according to the specified
+ * control parameters in the FMC_PCCARD_HandleTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Init: Pointer to PCCARD Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
+
+ /* Get PCCARD control register value */
+ tmpr = Device->PCR4;
+
+ /* Clear TAR, TCLR, PWAITEN and PWID bits */
+ tmpr &= ((uint32_t)~(FMC_PCR4_TAR | FMC_PCR4_TCLR | FMC_PCR4_PWAITEN | \
+ FMC_PCR4_PWID));
+
+ /* Set FMC_PCCARD device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FMC_NAND_PCC_MEM_BUS_WIDTH_16 |\
+ (Init->TCLRSetupTime << 9U) |\
+ (Init->TARSetupTime << 13U));
+
+ Device->PCR4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_PCCARD Common space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get PCCARD common space timing register value */
+ tmpr = Device->PMEM4;
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PMEM4_MEMSET4 | FMC_PMEM4_MEMWAIT4 | FMC_PMEM4_MEMHOLD4 | \
+ FMC_PMEM4_MEMHIZ4));
+ /* Set PCCARD timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ Device->PMEM4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_PCCARD Attribute space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get PCCARD timing parameters */
+ tmpr = Device->PATT4;
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PATT4_ATTSET4 | FMC_PATT4_ATTWAIT4 | FMC_PATT4_ATTHOLD4 | \
+ FMC_PATT4_ATTHIZ4));
+
+ /* Set PCCARD timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+ Device->PATT4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_PCCARD IO space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get FMC_PCCARD device timing parameters */
+ tmpr = Device->PIO4;
+
+ /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */
+ tmpr &= ((uint32_t)~(FMC_PIO4_IOSET4 | FMC_PIO4_IOWAIT4 | FMC_PIO4_IOHOLD4 | \
+ FMC_PIO4_IOHIZ4));
+
+ /* Set FMC_PCCARD device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ Device->PIO4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FMC_PCCARD device
+ * @param Device: Pointer to PCCARD device instance
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+
+ /* Disable the FMC_PCCARD device */
+ __FMC_PCCARD_DISABLE(Device);
+
+ /* De-initialize the FMC_PCCARD device */
+ Device->PCR4 = 0x00000018U;
+ Device->SR4 = 0x00000000U;
+ Device->PMEM4 = 0xFCFCFCFCU;
+ Device->PATT4 = 0xFCFCFCFCU;
+ Device->PIO4 = 0xFCFCFCFCU;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/** @addtogroup FMC_LL_SDRAM
+ * @brief SDRAM Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use SDRAM device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FMC SDRAM banks in order
+ to run the SDRAM external devices.
+
+ (+) FMC SDRAM bank reset using the function FMC_SDRAM_DeInit()
+ (+) FMC SDRAM bank control configuration using the function FMC_SDRAM_Init()
+ (+) FMC SDRAM bank timing configuration using the function FMC_SDRAM_Timing_Init()
+ (+) FMC SDRAM bank enable/disable write operation using the functions
+ FMC_SDRAM_WriteOperation_Enable()/FMC_SDRAM_WriteOperation_Disable()
+ (+) FMC SDRAM bank send command using the function FMC_SDRAM_SendCommand()
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FMC_LL_SDRAM_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC SDRAM interface
+ (+) De-initialize the FMC SDRAM interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FMC_SDRAM device according to the specified
+ * control parameters in the FMC_SDRAM_InitTypeDef
+ * @param Device: Pointer to SDRAM device instance
+ * @param Init: Pointer to SDRAM Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init)
+{
+ uint32_t tmpr1 = 0U;
+ uint32_t tmpr2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Init->SDBank));
+ assert_param(IS_FMC_COLUMNBITS_NUMBER(Init->ColumnBitsNumber));
+ assert_param(IS_FMC_ROWBITS_NUMBER(Init->RowBitsNumber));
+ assert_param(IS_FMC_SDMEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FMC_INTERNALBANK_NUMBER(Init->InternalBankNumber));
+ assert_param(IS_FMC_CAS_LATENCY(Init->CASLatency));
+ assert_param(IS_FMC_WRITE_PROTECTION(Init->WriteProtection));
+ assert_param(IS_FMC_SDCLOCK_PERIOD(Init->SDClockPeriod));
+ assert_param(IS_FMC_READ_BURST(Init->ReadBurst));
+ assert_param(IS_FMC_READPIPE_DELAY(Init->ReadPipeDelay));
+
+ /* Set SDRAM bank configuration parameters */
+ if (Init->SDBank != FMC_SDRAM_BANK2)
+ {
+ tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
+
+ /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+ tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+ FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+ FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+
+ tmpr1 |= (uint32_t)(Init->ColumnBitsNumber |\
+ Init->RowBitsNumber |\
+ Init->MemoryDataWidth |\
+ Init->InternalBankNumber |\
+ Init->CASLatency |\
+ Init->WriteProtection |\
+ Init->SDClockPeriod |\
+ Init->ReadBurst |\
+ Init->ReadPipeDelay
+ );
+ Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
+ }
+ else /* FMC_Bank2_SDRAM */
+ {
+ tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
+
+ /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+ tmpr1 &= ((uint32_t)~(FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+ tmpr1 |= (uint32_t)(Init->SDClockPeriod |\
+ Init->ReadBurst |\
+ Init->ReadPipeDelay);
+
+ tmpr2 = Device->SDCR[FMC_SDRAM_BANK2];
+
+ /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+ tmpr2 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+ FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+ FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+ tmpr2 |= (uint32_t)(Init->ColumnBitsNumber |\
+ Init->RowBitsNumber |\
+ Init->MemoryDataWidth |\
+ Init->InternalBankNumber |\
+ Init->CASLatency |\
+ Init->WriteProtection);
+
+ Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
+ Device->SDCR[FMC_SDRAM_BANK2] = tmpr2;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_SDRAM device timing according to the specified
+ * parameters in the FMC_SDRAM_TimingTypeDef
+ * @param Device: Pointer to SDRAM device instance
+ * @param Timing: Pointer to SDRAM Timing structure
+ * @param Bank: SDRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr1 = 0U;
+ uint32_t tmpr2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_LOADTOACTIVE_DELAY(Timing->LoadToActiveDelay));
+ assert_param(IS_FMC_EXITSELFREFRESH_DELAY(Timing->ExitSelfRefreshDelay));
+ assert_param(IS_FMC_SELFREFRESH_TIME(Timing->SelfRefreshTime));
+ assert_param(IS_FMC_ROWCYCLE_DELAY(Timing->RowCycleDelay));
+ assert_param(IS_FMC_WRITE_RECOVERY_TIME(Timing->WriteRecoveryTime));
+ assert_param(IS_FMC_RP_DELAY(Timing->RPDelay));
+ assert_param(IS_FMC_RCD_DELAY(Timing->RCDDelay));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* Set SDRAM device timing parameters */
+ if (Bank != FMC_SDRAM_BANK2)
+ {
+ tmpr1 = Device->SDTR[FMC_SDRAM_BANK1];
+
+ /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+ tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+ FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+ FMC_SDTR1_TRCD));
+
+ tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1U) |\
+ (((Timing->ExitSelfRefreshDelay)-1U) << 4U) |\
+ (((Timing->SelfRefreshTime)-1U) << 8U) |\
+ (((Timing->RowCycleDelay)-1U) << 12U) |\
+ (((Timing->WriteRecoveryTime)-1U) <<16U) |\
+ (((Timing->RPDelay)-1U) << 20U) |\
+ (((Timing->RCDDelay)-1U) << 24U));
+ Device->SDTR[FMC_SDRAM_BANK1] = tmpr1;
+ }
+ else /* FMC_Bank2_SDRAM */
+ {
+ tmpr1 = Device->SDTR[FMC_SDRAM_BANK1];
+
+ /* Clear TRC and TRP bits */
+ tmpr1 &= ((uint32_t)~(FMC_SDTR1_TRC | FMC_SDTR1_TRP));
+
+ tmpr1 |= (uint32_t)((((Timing->RowCycleDelay)-1) << 12) |\
+ (((Timing->RPDelay)-1) << 20));
+
+ tmpr2 = Device->SDTR[FMC_SDRAM_BANK2];
+
+ /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+ tmpr2 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+ FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+ FMC_SDTR1_TRCD));
+
+ tmpr2 |= (uint32_t)((((Timing->LoadToActiveDelay)-1) |\
+ (((Timing->ExitSelfRefreshDelay)-1) << 4) |\
+ (((Timing->SelfRefreshTime)-1) << 8) |\
+ (((Timing->WriteRecoveryTime)-1) <<16) |\
+ (((Timing->RCDDelay)-1) << 24)));
+
+ Device->SDTR[FMC_SDRAM_BANK1] = tmpr1;
+ Device->SDTR[FMC_SDRAM_BANK2] = tmpr2;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FMC_SDRAM peripheral
+ * @param Device: Pointer to SDRAM device instance
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* De-initialize the SDRAM device */
+ Device->SDCR[Bank] = 0x000002D0U;
+ Device->SDTR[Bank] = 0x0FFFFFFFU;
+ Device->SDCMR = 0x00000000U;
+ Device->SDRTR = 0x00000000U;
+ Device->SDSR = 0x00000000U;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup FMC_LL_SDRAMPrivate_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FMC_SDRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FMC SDRAM interface.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Enables dynamically FMC_SDRAM write protection.
+ * @param Device: Pointer to SDRAM device instance
+ * @param Bank: SDRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* Enable write protection */
+ Device->SDCR[Bank] |= FMC_SDRAM_WRITE_PROTECTION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_SDRAM write protection.
+ * @param hsdram: FMC_SDRAM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* Disable write protection */
+ Device->SDCR[Bank] &= ~FMC_SDRAM_WRITE_PROTECTION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Send Command to the FMC SDRAM bank
+ * @param Device: Pointer to SDRAM device instance
+ * @param Command: Pointer to SDRAM command structure
+ * @param Timing: Pointer to SDRAM Timing structure
+ * @param Timeout: Timeout wait value
+ * @retval HAL state
+ */
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
+{
+ __IO uint32_t tmpr = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_COMMAND_MODE(Command->CommandMode));
+ assert_param(IS_FMC_COMMAND_TARGET(Command->CommandTarget));
+ assert_param(IS_FMC_AUTOREFRESH_NUMBER(Command->AutoRefreshNumber));
+ assert_param(IS_FMC_MODE_REGISTER(Command->ModeRegisterDefinition));
+
+ /* Set command register */
+ tmpr = (uint32_t)((Command->CommandMode) |\
+ (Command->CommandTarget) |\
+ (((Command->AutoRefreshNumber)-1U) << 5U) |\
+ ((Command->ModeRegisterDefinition) << 9U)
+ );
+
+ Device->SDCMR = tmpr;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until command is send */
+ while(HAL_IS_BIT_SET(Device->SDSR, FMC_SDSR_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Program the SDRAM Memory Refresh rate.
+ * @param Device: Pointer to SDRAM device instance
+ * @param RefreshRate: The SDRAM refresh rate value.
+ * @retval HAL state
+ */
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_REFRESH_RATE(RefreshRate));
+
+ /* Set the refresh rate in command register */
+ Device->SDRTR |= (RefreshRate<<1U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the Number of consecutive SDRAM Memory auto Refresh commands.
+ * @param Device: Pointer to SDRAM device instance
+ * @param AutoRefreshNumber: Specifies the auto Refresh number.
+ * @retval None
+ */
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_AUTOREFRESH_NUMBER(AutoRefreshNumber));
+
+ /* Set the Auto-refresh number in command register */
+ Device->SDCMR |= (AutoRefreshNumber << 5U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the indicated FMC SDRAM bank mode status.
+ * @param Device: Pointer to SDRAM device instance
+ * @param Bank: Defines the FMC SDRAM bank. This parameter can be
+ * FMC_Bank1_SDRAM or FMC_Bank2_SDRAM.
+ * @retval The FMC SDRAM bank mode status, could be on of the following values:
+ * FMC_SDRAM_NORMAL_MODE, FMC_SDRAM_SELF_REFRESH_MODE or
+ * FMC_SDRAM_POWER_DOWN_MODE.
+ */
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* Get the corresponding bank mode */
+ if(Bank == FMC_SDRAM_BANK1)
+ {
+ tmpreg = (uint32_t)(Device->SDSR & FMC_SDSR_MODES1);
+ }
+ else
+ {
+ tmpreg = ((uint32_t)(Device->SDSR & FMC_SDSR_MODES2) >> 2U);
+ }
+
+ /* Return the mode status */
+ return tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED || HAL_SDRAM_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1421 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fmc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FMC_H
+#define __STM32F4xx_LL_FMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMC_LL
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Types FMC Private Types
+ * @{
+ */
+
+/**
+ * @brief FMC NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FMC_Wrap_Mode
+ This mode is not available for the STM32F446/467/479xx devices */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
+ This parameter can be a value of @ref FMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock */
+
+ uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Write_FIFO
+ This mode is available only for the STM32F446/469/479xx devices */
+
+ uint32_t PageSize; /*!< Specifies the memory page size.
+ This parameter can be a value of @ref FMC_Page_Size */
+}FMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FMC NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FMC_Access_Mode */
+}FMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_InitTypeDef;
+
+/**
+ * @brief FMC NAND/PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_PCCARD_InitTypeDef;
+
+/**
+ * @brief FMC SDRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_SDRAM_Bank */
+
+ uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */
+
+ uint32_t RowBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */
+
+ uint32_t MemoryDataWidth; /*!< Defines the memory device width.
+ This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */
+
+ uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks.
+ This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */
+
+ uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles.
+ This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */
+
+ uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode.
+ This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */
+
+ uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow
+ to disable the clock before changing frequency.
+ This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */
+
+ uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read
+ commands during the CAS latency and stores data in the Read FIFO.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */
+
+ uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */
+}FMC_SDRAM_InitTypeDef;
+
+/**
+ * @brief FMC SDRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and
+ an active or Refresh command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to
+ issuing the Activate command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock
+ cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command
+ and the delay between two consecutive Refresh commands in number of
+ memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command
+ in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write
+ command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+}FMC_SDRAM_TimingTypeDef;
+
+/**
+ * @brief SDRAM command parameters structure definition
+ */
+typedef struct
+{
+ uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */
+
+ uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Target. */
+
+ uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued
+ in auto refresh mode.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+ uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */
+}FMC_SDRAM_CommandTypeDef;
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Constants FMC Private Constants
+ * @{
+ */
+
+/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller
+ * @{
+ */
+/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank
+ * @{
+ */
+#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000U)
+#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002U)
+#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004U)
+#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing
+ * @{
+ */
+#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000U)
+#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Memory_Type FMC Memory Type
+ * @{
+ */
+#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000U)
+#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004U)
+#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width
+ * @{
+ */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access
+ * @{
+ */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040U)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode
+ * @{
+ */
+#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000U)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wrap_Mode FMC Wrap Mode
+ * @{
+ */
+/** @note This mode is not available for the STM32F446/469/479xx devices
+ */
+#define FMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Timing FMC Wait Timing
+ * @{
+ */
+#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000U)
+#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Operation FMC Write Operation
+ * @{
+ */
+#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal FMC Wait Signal
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Extended_Mode FMC Extended Mode
+ * @{
+ */
+#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait
+ * @{
+ */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000U)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Page_Size FMC Page Size
+ * @{
+ */
+#define FMC_PAGE_SIZE_NONE ((uint32_t)0x00000000U)
+#define FMC_PAGE_SIZE_128 ((uint32_t)FMC_BCR1_CPSIZE_0)
+#define FMC_PAGE_SIZE_256 ((uint32_t)FMC_BCR1_CPSIZE_1)
+#define FMC_PAGE_SIZE_512 ((uint32_t)(FMC_BCR1_CPSIZE_0 | FMC_BCR1_CPSIZE_1))
+#define FMC_PAGE_SIZE_1024 ((uint32_t)FMC_BCR1_CPSIZE_2)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_FIFO FMC Write FIFO
+ * @note These values are available only for the STM32F446/469/479xx devices.
+ * @{
+ */
+#define FMC_WRITE_FIFO_DISABLE ((uint32_t)FMC_BCR1_WFDIS)
+#define FMC_WRITE_FIFO_ENABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Burst FMC Write Burst
+ * @{
+ */
+#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Continous_Clock FMC Continuous Clock
+ * @{
+ */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000U)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Access_Mode FMC Access Mode
+ * @{
+ */
+#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000U)
+#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000U)
+#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000U)
+#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller
+ * @{
+ */
+/** @defgroup FMC_NAND_Bank FMC NAND Bank
+ * @{
+ */
+#define FMC_NAND_BANK2 ((uint32_t)0x00000010U)
+#define FMC_NAND_BANK3 ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_feature FMC Wait feature
+ * @{
+ */
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type
+ * @{
+ */
+#define FMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000U)
+#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width
+ * @{
+ */
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC FMC ECC
+ * @{
+ */
+#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000U)
+#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size
+ * @{
+ */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000U)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000U)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000U)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000U)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000U)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller
+ * @{
+ */
+/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank
+ * @{
+ */
+#define FMC_SDRAM_BANK1 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_BANK2 ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number
+ * @{
+ */
+#define FMC_SDRAM_COLUMN_BITS_NUM_8 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_COLUMN_BITS_NUM_9 ((uint32_t)0x00000001U)
+#define FMC_SDRAM_COLUMN_BITS_NUM_10 ((uint32_t)0x00000002U)
+#define FMC_SDRAM_COLUMN_BITS_NUM_11 ((uint32_t)0x00000003U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number
+ * @{
+ */
+#define FMC_SDRAM_ROW_BITS_NUM_11 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_ROW_BITS_NUM_12 ((uint32_t)0x00000004U)
+#define FMC_SDRAM_ROW_BITS_NUM_13 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width
+ * @{
+ */
+#define FMC_SDRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+#define FMC_SDRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number
+ * @{
+ */
+#define FMC_SDRAM_INTERN_BANKS_NUM_2 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_INTERN_BANKS_NUM_4 ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency
+ * @{
+ */
+#define FMC_SDRAM_CAS_LATENCY_1 ((uint32_t)0x00000080U)
+#define FMC_SDRAM_CAS_LATENCY_2 ((uint32_t)0x00000100U)
+#define FMC_SDRAM_CAS_LATENCY_3 ((uint32_t)0x00000180U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection
+ * @{
+ */
+#define FMC_SDRAM_WRITE_PROTECTION_DISABLE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_WRITE_PROTECTION_ENABLE ((uint32_t)0x00000200U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period
+ * @{
+ */
+#define FMC_SDRAM_CLOCK_DISABLE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_CLOCK_PERIOD_2 ((uint32_t)0x00000800U)
+#define FMC_SDRAM_CLOCK_PERIOD_3 ((uint32_t)0x00000C00U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst
+ * @{
+ */
+#define FMC_SDRAM_RBURST_DISABLE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_RBURST_ENABLE ((uint32_t)0x00001000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay
+ * @{
+ */
+#define FMC_SDRAM_RPIPE_DELAY_0 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_RPIPE_DELAY_1 ((uint32_t)0x00002000U)
+#define FMC_SDRAM_RPIPE_DELAY_2 ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode
+ * @{
+ */
+#define FMC_SDRAM_CMD_NORMAL_MODE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_CMD_CLK_ENABLE ((uint32_t)0x00000001U)
+#define FMC_SDRAM_CMD_PALL ((uint32_t)0x00000002U)
+#define FMC_SDRAM_CMD_AUTOREFRESH_MODE ((uint32_t)0x00000003U)
+#define FMC_SDRAM_CMD_LOAD_MODE ((uint32_t)0x00000004U)
+#define FMC_SDRAM_CMD_SELFREFRESH_MODE ((uint32_t)0x00000005U)
+#define FMC_SDRAM_CMD_POWERDOWN_MODE ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target
+ * @{
+ */
+#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2
+#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1
+#define FMC_SDRAM_CMD_TARGET_BANK1_2 ((uint32_t)0x00000018U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status
+ * @{
+ */
+#define FMC_SDRAM_NORMAL_MODE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0
+#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Interrupt_definition FMC Interrupt definition
+ * @{
+ */
+#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008U)
+#define FMC_IT_LEVEL ((uint32_t)0x00000010U)
+#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020U)
+#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Flag_definition FMC Flag definition
+ * @{
+ */
+#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001U)
+#define FMC_FLAG_LEVEL ((uint32_t)0x00000002U)
+#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004U)
+#define FMC_FLAG_FEMPT ((uint32_t)0x00000040U)
+#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE
+#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY
+#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Alias_definition FMC Alias definition
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #define FMC_NAND_TypeDef FMC_Bank3_TypeDef
+#else
+ #define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef
+ #define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+ #define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
+ #define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
+ #define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef
+
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #define FMC_NAND_DEVICE FMC_Bank3
+#else
+ #define FMC_NAND_DEVICE FMC_Bank2_3
+ #define FMC_PCCARD_DEVICE FMC_Bank4
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+ #define FMC_NORSRAM_DEVICE FMC_Bank1
+ #define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E
+ #define FMC_SDRAM_DEVICE FMC_Bank5_6
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Macros FMC Private Macros
+ * @{
+ */
+
+/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN)
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->PCR &= ~FMC_PCR_PBKEN)
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN))
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FMC_PCR3_PBKEN))
+
+#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */
+/**
+ * @}
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup FMC_LL_PCCARD_Macros FMC PCCARD Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN)
+/**
+ * @}
+ */
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+/** @defgroup FMC_LL_Flag_Interrupt_Macros FMC Flag&Interrupt Macros
+ * @brief macros to handle FMC flags and interrupts
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) ((__INSTANCE__)->SR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) ((__INSTANCE__)->SR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) ((__INSTANCE__)->SR &= ~(__FLAG__))
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+/**
+ * @brief Enable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error.
+ * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag.
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR
+ * @retval None
+ */
+#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros
+ * @{
+ */
+#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \
+ ((BANK) == FMC_NORSRAM_BANK2) || \
+ ((BANK) == FMC_NORSRAM_BANK3) || \
+ ((BANK) == FMC_NORSRAM_BANK4))
+
+#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
+
+#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
+
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \
+ ((__MODE__) == FMC_ACCESS_MODE_B) || \
+ ((__MODE__) == FMC_ACCESS_MODE_C) || \
+ ((__MODE__) == FMC_ACCESS_MODE_D))
+
+#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_NAND_BANK2) || \
+ ((BANK) == FMC_NAND_BANK3))
+
+#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+
+#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_16))
+
+#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FMC_NAND_ECC_ENABLE))
+
+#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+
+#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE)
+
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE)
+
+#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE)
+
+#define IS_FMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_PCCARD_DEVICE)
+
+#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define IS_FMC_WRAP_MODE(__MODE__) (((__MODE__) == FMC_WRAP_MODE_DISABLE) || \
+ ((__MODE__) == FMC_WRAP_MODE_ENABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \
+ ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS))
+
+#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \
+ ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \
+ ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \
+ ((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \
+ ((__BURST__) == FMC_WRITE_BURST_ENABLE))
+
+#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U)
+
+#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U))
+
+#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U))
+
+#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U)
+
+#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U))
+
+#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1U) && ((DIV) <= 16U))
+
+#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \
+ ((BANK) == FMC_SDRAM_BANK2))
+
+#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11))
+
+#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_13))
+
+#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \
+ ((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4))
+
+
+#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_3))
+
+#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDRAM_CLOCK_DISABLE) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_2) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_3))
+
+#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_SDRAM_RBURST_DISABLE) || \
+ ((RBURST) == FMC_SDRAM_RBURST_ENABLE))
+
+
+#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_SDRAM_RPIPE_DELAY_0) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_1) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_2))
+
+#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0U) && ((TIME) <= 16U))
+
+#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0U) && ((TIME) <= 16U))
+
+#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_SDRAM_CMD_NORMAL_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_CLK_ENABLE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_PALL) || \
+ ((COMMAND) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_LOAD_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_POWERDOWN_MODE))
+
+#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK2) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1_2))
+
+#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0U) && ((NUMBER) <= 16U))
+
+#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191U)
+
+#define IS_FMC_REFRESH_RATE(RATE) ((RATE) <= 8191U)
+
+#define IS_FMC_SDRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_SDRAM_DEVICE)
+
+#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \
+ ((WRITE) == FMC_SDRAM_WRITE_PROTECTION_ENABLE))
+
+#define IS_FMC_PAGESIZE(SIZE) (((SIZE) == FMC_PAGE_SIZE_NONE) || \
+ ((SIZE) == FMC_PAGE_SIZE_128) || \
+ ((SIZE) == FMC_PAGE_SIZE_256) || \
+ ((SIZE) == FMC_PAGE_SIZE_512) || \
+ ((SIZE) == FMC_PAGE_SIZE_1024))
+
+#if defined (STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_FMC_WRITE_FIFO(FIFO) (((FIFO) == FMC_WRITE_FIFO_DISABLE) || \
+ ((FIFO) == FMC_WRITE_FIFO_ENABLE))
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions
+ * @{
+ */
+
+/** @defgroup FMC_LL_NORSRAM NOR SRAM
+ * @{
+ */
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND NAND
+ * @{
+ */
+/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup FMC_LL_PCCARD PCCARD
+ * @{
+ */
+/** @defgroup FMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @defgroup FMC_LL_SDRAM SDRAM
+ * @{
+ */
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate);
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber);
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1026 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fsmc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FSMC Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories:
+ * + Initialization/de-initialization functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FSMC peripheral features #####
+ ==============================================================================
+ [..] The Flexible static memory controller (FSMC) includes two memory controllers:
+ (+) The NOR/PSRAM memory controller
+ (+) The NAND/PC Card memory controller
+
+ [..] The FSMC functional block makes the interface with synchronous and asynchronous static
+ memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
+ (+) to translate AHB transactions into the appropriate external device protocol.
+ (+) to meet the access time requirements of the external memory devices.
+
+ [..] All external memories share the addresses, data and control signals with the controller.
+ Each external device is accessed by means of a unique Chip Select. The FSMC performs
+ only one access at a time to an external device.
+ The main features of the FSMC controller are the following:
+ (+) Interface with static-memory mapped devices including:
+ (++) Static random access memory (SRAM).
+ (++) Read-only memory (ROM).
+ (++) NOR Flash memory/OneNAND Flash memory.
+ (++) PSRAM (4 memory banks).
+ (++) 16-bit PC Card compatible devices.
+ (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
+ data.
+ (+) Independent Chip Select control for each memory bank.
+ (+) Independent configuration for each memory bank.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FSMC_LL FSMC Low Layer
+ * @brief FSMC driver modules
+ * @{
+ */
+
+#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup FSMC_LL_Private_Functions
+ * @{
+ */
+
+/** @addtogroup FSMC_LL_NORSRAM
+ * @brief NORSRAM Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NORSRAM device driver #####
+ ==============================================================================
+
+ [..]
+ This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order
+ to run the NORSRAM external devices.
+
+ (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit()
+ (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init()
+ (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init()
+ (+) FSMC NORSRAM bank extended timing configuration using the function
+ FSMC_NORSRAM_Extended_Timing_Init()
+ (+) FSMC NORSRAM bank enable/disable write operation using the functions
+ FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable()
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FSMC NORSRAM interface
+ (+) De-initialize the FSMC NORSRAM interface
+ (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the FSMC_NORSRAM device according to the specified
+ * control parameters in the FSMC_NORSRAM_InitTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Init: Pointer to NORSRAM Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef* Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank));
+ assert_param(IS_FSMC_MUX(Init->DataAddressMux));
+ assert_param(IS_FSMC_MEMORY(Init->MemoryType));
+ assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode));
+ assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity));
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode));
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+ assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
+ assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation));
+ assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal));
+ assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode));
+ assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
+ assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
+ assert_param(IS_FSMC_PAGESIZE(Init->PageSize));
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+ assert_param(IS_FSMC_WRITE_FIFO(Init->WriteFifo));
+ assert_param(IS_FSMC_CONTINOUS_CLOCK(Init->ContinuousClock));
+#endif /* STM32F412Zx || TM32F412Vx */
+
+ /* Get the BTCR register value */
+ tmpr = Device->BTCR[Init->NSBank];
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN,
+ WAITEN, EXTMOD, ASYNCWAIT, CPSIZE and CBURSTRW bits */
+ tmpr &= ((uint32_t)~(FSMC_BCR1_MBKEN | FSMC_BCR1_MUXEN | FSMC_BCR1_MTYP | \
+ FSMC_BCR1_MWID | FSMC_BCR1_FACCEN | FSMC_BCR1_BURSTEN | \
+ FSMC_BCR1_WAITPOL | FSMC_BCR1_WRAPMOD | FSMC_BCR1_WAITCFG | \
+ FSMC_BCR1_WREN | FSMC_BCR1_WAITEN | FSMC_BCR1_EXTMOD | \
+ FSMC_BCR1_ASYNCWAIT | FSMC_BCR1_CPSIZE | FSMC_BCR1_CBURSTRW));
+ /* Set NORSRAM device control parameters */
+ tmpr |= (uint32_t)(Init->DataAddressMux |\
+ Init->MemoryType |\
+ Init->MemoryDataWidth |\
+ Init->BurstAccessMode |\
+ Init->WaitSignalPolarity |\
+ Init->WrapMode |\
+ Init->WaitSignalActive |\
+ Init->WriteOperation |\
+ Init->WaitSignal |\
+ Init->ExtendedMode |\
+ Init->AsynchronousWait |\
+ Init->PageSize |\
+ Init->WriteBurst
+ );
+#else /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+ /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WAITCFG, WREN,
+ WAITEN, EXTMOD, ASYNCWAIT,CPSIZE, CBURSTRW, CCLKEN and WFDIS bits */
+ tmpr &= ((uint32_t)~(FSMC_BCR1_MBKEN | FSMC_BCR1_MUXEN | FSMC_BCR1_MTYP | \
+ FSMC_BCR1_MWID | FSMC_BCR1_FACCEN | FSMC_BCR1_BURSTEN | \
+ FSMC_BCR1_WAITPOL | FSMC_BCR1_WAITCFG | FSMC_BCR1_WREN | \
+ FSMC_BCR1_WAITEN | FSMC_BCR1_EXTMOD | FSMC_BCR1_ASYNCWAIT | \
+ FSMC_BCR1_CPSIZE | FSMC_BCR1_CBURSTRW | FSMC_BCR1_CCLKEN | \
+ FSMC_BCR1_WFDIS));
+ /* Set NORSRAM device control parameters */
+ tmpr |= (uint32_t)(Init->DataAddressMux |\
+ Init->MemoryType |\
+ Init->MemoryDataWidth |\
+ Init->BurstAccessMode |\
+ Init->WaitSignalPolarity |\
+ Init->WaitSignalActive |\
+ Init->WriteOperation |\
+ Init->WaitSignal |\
+ Init->ExtendedMode |\
+ Init->AsynchronousWait |\
+ Init->WriteBurst |\
+ Init->ContinuousClock |\
+ Init->PageSize |\
+ Init->WriteFifo);
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+ if(Init->MemoryType == FSMC_MEMORY_TYPE_NOR)
+ {
+ tmpr |= (uint32_t)FSMC_NORSRAM_FLASH_ACCESS_ENABLE;
+ }
+
+ Device->BTCR[Init->NSBank] = tmpr;
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+ /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */
+ if((Init->ContinuousClock == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FSMC_NORSRAM_BANK1))
+ {
+ Device->BTCR[FSMC_NORSRAM_BANK1] |= (uint32_t)(Init->ContinuousClock);
+ }
+
+ if(Init->NSBank != FSMC_NORSRAM_BANK1)
+ {
+ Device->BTCR[FSMC_NORSRAM_BANK1] |= (uint32_t)(Init->WriteFifo);
+ }
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the FSMC_NORSRAM peripheral
+ * @param Device: Pointer to NORSRAM device instance
+ * @param ExDevice: Pointer to NORSRAM extended mode device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Disable the FSMC_NORSRAM device */
+ __FSMC_NORSRAM_DISABLE(Device, Bank);
+
+ /* De-initialize the FSMC_NORSRAM device */
+ /* FSMC_NORSRAM_BANK1 */
+ if(Bank == FSMC_NORSRAM_BANK1)
+ {
+ Device->BTCR[Bank] = 0x000030DBU;
+ }
+ /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */
+ else
+ {
+ Device->BTCR[Bank] = 0x000030D2U;
+ }
+
+ Device->BTCR[Bank + 1U] = 0x0FFFFFFFU;
+ ExDevice->BWTR[Bank] = 0x0FFFFFFFU;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initialize the FSMC_NORSRAM Timing according to the specified
+ * parameters in the FSMC_NORSRAM_TimingTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Timing: Pointer to NORSRAM Timing structure
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+ assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+ assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
+ assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Get the BTCR register value */
+ tmpr = Device->BTCR[Bank + 1U];
+
+ /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+ tmpr &= ((uint32_t)~(FSMC_BTR1_ADDSET | FSMC_BTR1_ADDHLD | FSMC_BTR1_DATAST | \
+ FSMC_BTR1_BUSTURN | FSMC_BTR1_CLKDIV | FSMC_BTR1_DATLAT | \
+ FSMC_BTR1_ACCMOD));
+
+ /* Set FSMC_NORSRAM device timing parameters */
+ tmpr |= (uint32_t)(Timing->AddressSetupTime |\
+ ((Timing->AddressHoldTime) << 4U) |\
+ ((Timing->DataSetupTime) << 8U) |\
+ ((Timing->BusTurnAroundDuration) << 16U) |\
+ (((Timing->CLKDivision)-1U) << 20U) |\
+ (((Timing->DataLatency)-2U) << 24U) |\
+ (Timing->AccessMode));
+
+ Device->BTCR[Bank + 1] = tmpr;
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+ /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */
+ if(HAL_IS_BIT_SET(Device->BTCR[FSMC_NORSRAM_BANK1], FSMC_BCR1_CCLKEN))
+ {
+ tmpr = (uint32_t)(Device->BTCR[FSMC_NORSRAM_BANK1 + 1U] & ~(((uint32_t)0x0FU) << 20U));
+ tmpr |= (uint32_t)(((Timing->CLKDivision)-1U) << 20U);
+ Device->BTCR[FSMC_NORSRAM_BANK1 + 1U] = tmpr;
+ }
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified
+ * parameters in the FSMC_NORSRAM_TimingTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Timing: Pointer to NORSRAM Timing structure
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode));
+
+ /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+ if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE)
+ {
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(Device));
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+ assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+ assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Get the BWTR register value */
+ tmpr = Device->BWTR[Bank];
+
+ /* Clear ADDSET, ADDHLD, DATAST, BUSTURN and ACCMOD bits */
+ tmpr &= ((uint32_t)~(FSMC_BWTR1_ADDSET | FSMC_BWTR1_ADDHLD | FSMC_BWTR1_DATAST | \
+ FSMC_BWTR1_BUSTURN | FSMC_BWTR1_ACCMOD));
+
+ tmpr |= (uint32_t)(Timing->AddressSetupTime |\
+ ((Timing->AddressHoldTime) << 4U) |\
+ ((Timing->DataSetupTime) << 8U) |\
+ ((Timing->BusTurnAroundDuration) << 16U) |\
+ (Timing->AccessMode));
+
+ Device->BWTR[Bank] = tmpr;
+ }
+ else
+ {
+ Device->BWTR[Bank] = 0x0FFFFFFFU;
+ }
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FSMC_NORSRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FSMC NORSRAM interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically FSMC_NORSRAM write operation.
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Enable write operation */
+ Device->BTCR[Bank] |= FSMC_WRITE_OPERATION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FSMC_NORSRAM write operation.
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Disable write operation */
+ Device->BTCR[Bank] &= ~FSMC_WRITE_OPERATION_ENABLE;
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/** @addtogroup FSMC_LL_NAND
+ * @brief NAND Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NAND device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FSMC NAND banks in order
+ to run the NAND external devices.
+
+ (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit()
+ (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init()
+ (+) FSMC NAND bank common space timing configuration using the function
+ FSMC_NAND_CommonSpace_Timing_Init()
+ (+) FSMC NAND bank attribute space timing configuration using the function
+ FSMC_NAND_AttributeSpace_Timing_Init()
+ (+) FSMC NAND bank enable/disable ECC correction feature using the functions
+ FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable()
+ (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC()
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FSMC_LL_NAND_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FSMC NAND interface
+ (+) De-initialize the FSMC NAND interface
+ (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FSMC_NAND device according to the specified
+ * control parameters in the FSMC_NAND_HandleTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Init: Pointer to NAND Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_BANK(Init->NandBank));
+ assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FSMC_ECC_STATE(Init->EccComputation));
+ assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize));
+ assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+ if(Init->NandBank == FSMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PCR2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PCR3;
+ }
+
+ /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+ tmpr &= ((uint32_t)~(FSMC_PCR2_PWAITEN | FSMC_PCR2_PBKEN | FSMC_PCR2_PTYP | \
+ FSMC_PCR2_PWID | FSMC_PCR2_ECCEN | FSMC_PCR2_TCLR | \
+ FSMC_PCR2_TAR | FSMC_PCR2_ECCPS));
+
+ /* Set NAND device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FSMC_PCR_MEMORY_TYPE_NAND |\
+ Init->MemoryDataWidth |\
+ Init->EccComputation |\
+ Init->ECCPageSize |\
+ ((Init->TCLRSetupTime) << 9U) |\
+ ((Init->TARSetupTime) << 13U));
+
+ if(Init->NandBank == FSMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PCR2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PCR3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_NAND Common space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PMEM2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PMEM3;
+ }
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FSMC_PMEM2_MEMSET2 | FSMC_PMEM2_MEMWAIT2 | FSMC_PMEM2_MEMHOLD2 | \
+ FSMC_PMEM2_MEMHIZ2));
+
+ /* Set FSMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U)
+ );
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PMEM2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PMEM3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_NAND Attribute space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PATT2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PATT3;
+ }
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FSMC_PATT2_ATTSET2 | FSMC_PATT2_ATTWAIT2 | FSMC_PATT2_ATTHOLD2 | \
+ FSMC_PATT2_ATTHIZ2));
+
+ /* Set FSMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U)
+ );
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PATT2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PATT3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FSMC_NAND device
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Disable the NAND Bank */
+ __FSMC_NAND_DISABLE(Device, Bank);
+
+ /* De-initialize the NAND Bank */
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* Set the FSMC_NAND_BANK2 registers to their reset values */
+ Device->PCR2 = 0x00000018U;
+ Device->SR2 = 0x00000040U;
+ Device->PMEM2 = 0xFCFCFCFCU;
+ Device->PATT2 = 0xFCFCFCFCU;
+ }
+ /* FSMC_Bank3_NAND */
+ else
+ {
+ /* Set the FSMC_NAND_BANK3 registers to their reset values */
+ Device->PCR3 = 0x00000018U;
+ Device->SR3 = 0x00000040U;
+ Device->PMEM3 = 0xFCFCFCFCU;
+ Device->PATT3 = 0xFCFCFCFCU;
+ }
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @addtogroup FSMC_LL_NAND_Private_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FSMC_NAND Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FSMC NAND interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically FSMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Enable ECC feature */
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ Device->PCR2 |= FSMC_PCR2_ECCEN;
+ }
+ else
+ {
+ Device->PCR3 |= FSMC_PCR3_ECCEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FSMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Disable ECC feature */
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ Device->PCR2 &= ~FSMC_PCR2_ECCEN;
+ }
+ else
+ {
+ Device->PCR3 &= ~FSMC_PCR3_ECCEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FSMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param ECCval: Pointer to ECC value
+ * @param Bank: NAND bank number
+ * @param Timeout: Timeout wait value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_DEVICE(Device));
+ assert_param(IS_FSMC_NAND_BANK(Bank));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until FIFO is empty */
+ while(__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* Get the ECCR2 register value */
+ *ECCval = (uint32_t)Device->ECCR2;
+ }
+ else
+ {
+ /* Get the ECCR3 register value */
+ *ECCval = (uint32_t)Device->ECCR3;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FSMC_LL_PCCARD
+ * @brief PCCARD Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use PCCARD device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FSMC PCCARD bank in order
+ to run the PCCARD/compact flash external devices.
+
+ (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit()
+ (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init()
+ (+) FSMC PCCARD bank common space timing configuration using the function
+ FSMC_PCCARD_CommonSpace_Timing_Init()
+ (+) FSMC PCCARD bank attribute space timing configuration using the function
+ FSMC_PCCARD_AttributeSpace_Timing_Init()
+ (+) FSMC PCCARD bank IO space timing configuration using the function
+ FSMC_PCCARD_IOSpace_Timing_Init()
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FSMC_LL_PCCARD_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FSMC PCCARD interface
+ (+) De-initialize the FSMC PCCARD interface
+ (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FSMC_PCCARD device according to the specified
+ * control parameters in the FSMC_PCCARD_HandleTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Init: Pointer to PCCARD Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+ /* Get PCCARD control register value */
+ tmpr = Device->PCR4;
+
+ /* Clear TAR, TCLR, PWAITEN and PWID bits */
+ tmpr &= ((uint32_t)~(FSMC_PCR4_TAR | FSMC_PCR4_TCLR | FSMC_PCR4_PWAITEN | \
+ FSMC_PCR4_PWID));
+
+ /* Set FSMC_PCCARD device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FSMC_NAND_PCC_MEM_BUS_WIDTH_16 |\
+ (Init->TCLRSetupTime << 9U) |\
+ (Init->TARSetupTime << 13U));
+
+ Device->PCR4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_PCCARD Common space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get PCCARD common space timing register value */
+ tmpr = Device->PMEM4;
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FSMC_PMEM4_MEMSET4 | FSMC_PMEM4_MEMWAIT4 | FSMC_PMEM4_MEMHOLD4 | \
+ FSMC_PMEM4_MEMHIZ4));
+ /* Set PCCARD timing parameters */
+ tmpr |= (uint32_t)((Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ (Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ Device->PMEM4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_PCCARD Attribute space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get PCCARD timing parameters */
+ tmpr = Device->PATT4;
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FSMC_PATT4_ATTSET4 | FSMC_PATT4_ATTWAIT4 | FSMC_PATT4_ATTHOLD4 | \
+ FSMC_PATT4_ATTHIZ4));
+
+ /* Set PCCARD timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+ Device->PATT4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_PCCARD IO space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get FSMC_PCCARD device timing parameters */
+ tmpr = Device->PIO4;
+
+ /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */
+ tmpr &= ((uint32_t)~(FSMC_PIO4_IOSET4 | FSMC_PIO4_IOWAIT4 | FSMC_PIO4_IOHOLD4 | \
+ FSMC_PIO4_IOHIZ4));
+
+ /* Set FSMC_PCCARD device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ Device->PIO4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FSMC_PCCARD device
+ * @param Device: Pointer to PCCARD device instance
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device)
+{
+ /* Disable the FSMC_PCCARD device */
+ __FSMC_PCCARD_DISABLE(Device);
+
+ /* De-initialize the FSMC_PCCARD device */
+ Device->PCR4 = 0x00000018U;
+ Device->SR4 = 0x00000000U;
+ Device->PMEM4 = 0xFCFCFCFCU;
+ Device->PATT4 = 0xFCFCFCFCU;
+ Device->PIO4 = 0xFCFCFCFCU;
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1049 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fsmc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FSMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FSMC_H
+#define __STM32F4xx_LL_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FSMC_LL
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Types FSMC Private Types
+ * @{
+ */
+
+/**
+ * @brief FSMC NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FSMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wrap_Mode
+ This mode is available only for the STM32F405/407/4015/417xx devices */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC.
+ This parameter can be a value of @ref FSMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FSMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FSMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock
+ This mode is available only for the STM32F412Vx/Zx/Rx devices */
+
+ uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Write_FIFO
+ This mode is available only for the STM32F412Vx/Vx devices */
+
+ uint32_t PageSize; /*!< Specifies the memory page size.
+ This parameter can be a value of @ref FMC_Page_Size */
+}FSMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FSMC NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FSMC_Access_Mode */
+
+}FSMC_NORSRAM_TimingTypeDef;
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/**
+ * @brief FSMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FSMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FSMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FSMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_InitTypeDef;
+
+/**
+ * @brief FSMC NAND/PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FSMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_PCCARD_InitTypeDef;
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Constants FSMC Private Constants
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller
+ * @{
+ */
+/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank
+ * @{
+ */
+#define FSMC_NORSRAM_BANK1 ((uint32_t)0x00000000U)
+#define FSMC_NORSRAM_BANK2 ((uint32_t)0x00000002U)
+#define FSMC_NORSRAM_BANK3 ((uint32_t)0x00000004U)
+#define FSMC_NORSRAM_BANK4 ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing
+ * @{
+ */
+#define FSMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Memory_Type FSMC Memory Type
+ * @{
+ */
+#define FSMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000U)
+#define FSMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004U)
+#define FSMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Data_Width FSMC NOR/SRAM Data Width
+ * @{
+ */
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access
+ * @{
+ */
+#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040U)
+#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode
+ * @{
+ */
+#define FSMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000U)
+#define FSMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode
+ * @note These values are available only for the STM32F405/415/407/417xx devices.
+ * @{
+ */
+#define FSMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Timing FSMC Wait Timing
+ * @{
+ */
+#define FSMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000U)
+#define FSMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Operation FSMC Write Operation
+ * @{
+ */
+#define FSMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal FSMC Wait Signal
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Extended_Mode FSMC Extended Mode
+ * @{
+ */
+#define FSMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait
+ * @{
+ */
+#define FSMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Page_Size FSMC Page Size
+ * @{
+ */
+#define FSMC_PAGE_SIZE_NONE ((uint32_t)0x00000000U)
+#define FSMC_PAGE_SIZE_128 ((uint32_t)FSMC_BCR1_CPSIZE_0)
+#define FSMC_PAGE_SIZE_256 ((uint32_t)FSMC_BCR1_CPSIZE_1)
+#define FSMC_PAGE_SIZE_512 ((uint32_t)(FSMC_BCR1_CPSIZE_0 | FSMC_BCR1_CPSIZE_1))
+#define FSMC_PAGE_SIZE_1024 ((uint32_t)FSMC_BCR1_CPSIZE_2)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_FIFO FSMC Write FIFO
+ * @note These values are available only for the STM32F412Vx/Zx/Rx devices.
+ * @{
+ */
+#define FSMC_WRITE_FIFO_DISABLE ((uint32_t)FSMC_BCR1_WFDIS)
+#define FSMC_WRITE_FIFO_ENABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Burst FSMC Write Burst
+ * @{
+ */
+#define FSMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Continous_Clock FSMC Continous Clock
+ * @note These values are available only for the STM32F412Vx/Zx/Rx devices.
+ * @{
+ */
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000U)
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Access_Mode FSMC Access Mode
+ * @{
+ */
+#define FSMC_ACCESS_MODE_A ((uint32_t)0x00000000U)
+#define FSMC_ACCESS_MODE_B ((uint32_t)0x10000000U)
+#define FSMC_ACCESS_MODE_C ((uint32_t)0x20000000U)
+#define FSMC_ACCESS_MODE_D ((uint32_t)0x30000000U)
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/** @defgroup FSMC_LL_NAND_Controller FSMC NAND and PCCARD Controller
+ * @{
+ */
+/** @defgroup FSMC_NAND_Bank FSMC NAND Bank
+ * @{
+ */
+#define FSMC_NAND_BANK2 ((uint32_t)0x00000010U)
+#define FSMC_NAND_BANK3 ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_feature FSMC Wait feature
+ * @{
+ */
+#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type
+ * @{
+ */
+#define FSMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000U)
+#define FSMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Data_Width FSMC NAND Data Width
+ * @{
+ */
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC FSMC ECC
+ * @{
+ */
+#define FSMC_NAND_ECC_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_NAND_ECC_ENABLE ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC_Page_Size FSMC ECC Page Size
+ * @{
+ */
+#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000U)
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/** @defgroup FSMC_LL_Interrupt_definition FSMC Interrupt definition
+ * @{
+ */
+#define FSMC_IT_RISING_EDGE ((uint32_t)0x00000008U)
+#define FSMC_IT_LEVEL ((uint32_t)0x00000010U)
+#define FSMC_IT_FALLING_EDGE ((uint32_t)0x00000020U)
+#define FSMC_IT_REFRESH_ERROR ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Flag_definition FSMC Flag definition
+ * @{
+ */
+#define FSMC_FLAG_RISING_EDGE ((uint32_t)0x00000001U)
+#define FSMC_FLAG_LEVEL ((uint32_t)0x00000002U)
+#define FSMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004U)
+#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Alias_definition FSMC Alias definition
+ * @{
+ */
+#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef
+#define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FSMC_NORSRAM_DEVICE FSMC_Bank1
+#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FSMC_NAND_DEVICE FSMC_Bank2_3
+#define FSMC_PCCARD_DEVICE FSMC_Bank4
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 FSMC_NORSRAM_MEM_BUS_WIDTH_8
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 FSMC_NORSRAM_MEM_BUS_WIDTH_16
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 FSMC_NORSRAM_MEM_BUS_WIDTH_32
+
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NORSRAM_InitTypeDef FSMC_NORSRAM_InitTypeDef
+#define FMC_NORSRAM_TimingTypeDef FSMC_NORSRAM_TimingTypeDef
+
+#define FMC_NORSRAM_Init FSMC_NORSRAM_Init
+#define FMC_NORSRAM_Timing_Init FSMC_NORSRAM_Timing_Init
+#define FMC_NORSRAM_Extended_Timing_Init FSMC_NORSRAM_Extended_Timing_Init
+#define FMC_NORSRAM_DeInit FSMC_NORSRAM_DeInit
+#define FMC_NORSRAM_WriteOperation_Enable FSMC_NORSRAM_WriteOperation_Enable
+#define FMC_NORSRAM_WriteOperation_Disable FSMC_NORSRAM_WriteOperation_Disable
+
+#define __FMC_NORSRAM_ENABLE __FSMC_NORSRAM_ENABLE
+#define __FMC_NORSRAM_DISABLE __FSMC_NORSRAM_DISABLE
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FMC_NAND_InitTypeDef FSMC_NAND_InitTypeDef
+#define FMC_PCCARD_InitTypeDef FSMC_PCCARD_InitTypeDef
+#define FMC_NAND_PCC_TimingTypeDef FSMC_NAND_PCC_TimingTypeDef
+
+#define FMC_NAND_Init FSMC_NAND_Init
+#define FMC_NAND_CommonSpace_Timing_Init FSMC_NAND_CommonSpace_Timing_Init
+#define FMC_NAND_AttributeSpace_Timing_Init FSMC_NAND_AttributeSpace_Timing_Init
+#define FMC_NAND_DeInit FSMC_NAND_DeInit
+#define FMC_NAND_ECC_Enable FSMC_NAND_ECC_Enable
+#define FMC_NAND_ECC_Disable FSMC_NAND_ECC_Disable
+#define FMC_NAND_GetECC FSMC_NAND_GetECC
+#define FMC_PCCARD_Init FSMC_PCCARD_Init
+#define FMC_PCCARD_CommonSpace_Timing_Init FSMC_PCCARD_CommonSpace_Timing_Init
+#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init
+#define FMC_PCCARD_IOSpace_Timing_Init FSMC_PCCARD_IOSpace_Timing_Init
+#define FMC_PCCARD_DeInit FSMC_PCCARD_DeInit
+
+#define __FMC_NAND_ENABLE __FSMC_NAND_ENABLE
+#define __FMC_NAND_DISABLE __FSMC_NAND_DISABLE
+#define __FMC_PCCARD_ENABLE __FSMC_PCCARD_ENABLE
+#define __FMC_PCCARD_DISABLE __FSMC_PCCARD_DISABLE
+#define __FMC_NAND_ENABLE_IT __FSMC_NAND_ENABLE_IT
+#define __FMC_NAND_DISABLE_IT __FSMC_NAND_DISABLE_IT
+#define __FMC_NAND_GET_FLAG __FSMC_NAND_GET_FLAG
+#define __FMC_NAND_CLEAR_FLAG __FSMC_NAND_CLEAR_FLAG
+#define __FMC_PCCARD_ENABLE_IT __FSMC_PCCARD_ENABLE_IT
+#define __FMC_PCCARD_DISABLE_IT __FSMC_PCCARD_DISABLE_IT
+#define __FMC_PCCARD_GET_FLAG __FSMC_PCCARD_GET_FLAG
+#define __FMC_PCCARD_CLEAR_FLAG __FSMC_PCCARD_CLEAR_FLAG
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FMC_NAND_TypeDef FSMC_NAND_TypeDef
+#define FMC_PCCARD_TypeDef FSMC_PCCARD_TypeDef
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FMC_NORSRAM_DEVICE FSMC_NORSRAM_DEVICE
+#define FMC_NORSRAM_EXTENDED_DEVICE FSMC_NORSRAM_EXTENDED_DEVICE
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FMC_NAND_DEVICE FSMC_NAND_DEVICE
+#define FMC_PCCARD_DEVICE FSMC_PCCARD_DEVICE
+
+#define FMC_NAND_BANK2 FSMC_NAND_BANK2
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FMC_NORSRAM_BANK1 FSMC_NORSRAM_BANK1
+#define FMC_NORSRAM_BANK2 FSMC_NORSRAM_BANK2
+#define FMC_NORSRAM_BANK3 FSMC_NORSRAM_BANK3
+
+#define FMC_IT_RISING_EDGE FSMC_IT_RISING_EDGE
+#define FMC_IT_LEVEL FSMC_IT_LEVEL
+#define FMC_IT_FALLING_EDGE FSMC_IT_FALLING_EDGE
+#define FMC_IT_REFRESH_ERROR FSMC_IT_REFRESH_ERROR
+
+#define FMC_FLAG_RISING_EDGE FSMC_FLAG_RISING_EDGE
+#define FMC_FLAG_LEVEL FSMC_FLAG_LEVEL
+#define FMC_FLAG_FALLING_EDGE FSMC_FLAG_FALLING_EDGE
+#define FMC_FLAG_FEMPT FSMC_FLAG_FEMPT
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Macros FSMC Private Macros
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Exported Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FSMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FSMC_BCR1_MBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN))
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FSMC_PCR3_PBKEN))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_PCCARD_Macros FSMC PCCARD Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Flag_Interrupt_Macros FSMC Flag&Interrupt Macros
+ * @brief macros to handle FSMC flags and interrupts
+ * @{
+ */
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__ : FSMC_NAND Bank
+ * @param __FLAG__ : FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __FLAG__: FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros
+ * @{
+ */
+#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \
+ ((__BANK__) == FSMC_NORSRAM_BANK2) || \
+ ((__BANK__) == FSMC_NORSRAM_BANK3) || \
+ ((__BANK__) == FSMC_NORSRAM_BANK4))
+
+#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE))
+
+#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \
+ ((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \
+ ((__MEMORY__) == FSMC_MEMORY_TYPE_NOR))
+
+#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \
+ ((__MODE__) == FSMC_ACCESS_MODE_B) || \
+ ((__MODE__) == FSMC_ACCESS_MODE_C) || \
+ ((__MODE__) == FSMC_ACCESS_MODE_D))
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_NAND_BANK2) || \
+ ((BANK) == FSMC_NAND_BANK3))
+
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+
+#define IS_FSMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16))
+
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FSMC_NAND_ECC_ENABLE))
+
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE)
+
+#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE)
+
+#define IS_FSMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NAND_DEVICE)
+
+#define IS_FSMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FSMC_PCCARD_DEVICE)
+
+#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \
+ ((__MODE__) == FSMC_WRAP_MODE_ENABLE))
+
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \
+ ((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS))
+
+#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \
+ ((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \
+ ((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \
+ ((__MODE__) == FSMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U))
+
+#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \
+ ((__BURST__) == FSMC_WRITE_BURST_ENABLE))
+
+#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U)
+
+#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U))
+
+#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U))
+
+#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U)
+
+#define IS_FSMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+#define IS_FSMC_CLK_DIV(DIV) (((DIV) > 1U) && ((DIV) <= 16U))
+
+#define IS_FSMC_PAGESIZE(SIZE) (((SIZE) == FSMC_PAGE_SIZE_NONE) || \
+ ((SIZE) == FSMC_PAGE_SIZE_128) || \
+ ((SIZE) == FSMC_PAGE_SIZE_256) || \
+ ((SIZE) == FSMC_PAGE_SIZE_1024))
+
+#define IS_FSMC_WRITE_FIFO(FIFO) (((FIFO) == FSMC_WRITE_FIFO_DISABLE) || \
+ ((FIFO) == FSMC_WRITE_FIFO_ENABLE))
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Functions FSMC LL Private Functions
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NORSRAM NOR SRAM
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/** @defgroup FSMC_LL_NAND NAND
+ * @{
+ */
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_PCCARD PCCARD
+ * @{
+ */
+/** @defgroup FSMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FSMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,511 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_sdmmc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SDMMC Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the SDMMC peripheral:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SDMMC peripheral features #####
+ ==============================================================================
+ [..] The SD/SDIO MMC card host interface (SDIO) provides an interface between the APB2
+ peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDIO cards and CE-ATA
+ devices.
+
+ [..] The SDIO features include the following:
+ (+) Full compliance with MultiMedia Card System Specification Version 4.2. Card support
+ for three different databus modes: 1-bit (default), 4-bit and 8-bit
+ (+) Full compatibility with previous versions of MultiMedia Cards (forward compatibility)
+ (+) Full compliance with SD Memory Card Specifications Version 2.0
+ (+) Full compliance with SD I/O Card Specification Version 2.0: card support for two
+ different data bus modes: 1-bit (default) and 4-bit
+ (+) Full support of the CE-ATA features (full compliance with CE-ATA digital protocol
+ Rev1.1)
+ (+) Data transfer up to 48 MHz for the 8 bit mode
+ (+) Data and command output enable signals to control external bidirectional drivers.
+
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a considered as a driver of service for external devices drivers
+ that interfaces with the SDIO peripheral.
+ According to the device used (SD card/ MMC card / SDIO card ...), a set of APIs
+ is used in the device's driver to perform SDIO operations and functionalities.
+
+ This driver is almost transparent for the final user, it is only used to implement other
+ functionalities of the external device.
+
+ [..]
+ (+) The SDIO clock (SDIOCLK = 48 MHz) is coming from a specific output of PLL
+ (PLL48CLK). Before start working with SDIO peripheral make sure that the
+ PLL is well configured.
+ The SDIO peripheral uses two clock signals:
+ (++) SDIO adapter clock (SDIOCLK = 48 MHz)
+ (++) APB2 bus clock (PCLK2)
+
+ -@@- PCLK2 and SDIO_CK clock frequencies must respect the following condition:
+ Frequency(PCLK2) >= (3 / 8 x Frequency(SDIO_CK))
+
+ (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDIO
+ peripheral.
+
+ (+) Enable the Power ON State using the SDIO_PowerState_ON(SDIOx)
+ function and disable it using the function SDIO_PowerState_OFF(SDIOx).
+
+ (+) Enable/Disable the clock using the __SDIO_ENABLE()/__SDIO_DISABLE() macros.
+
+ (+) Enable/Disable the peripheral interrupts using the macros __SDIO_ENABLE_IT(hsdio, IT)
+ and __SDIO_DISABLE_IT(hsdio, IT) if you need to use interrupt mode.
+
+ (+) When using the DMA mode
+ (++) Configure the DMA in the MSP layer of the external device
+ (++) Active the needed channel Request
+ (++) Enable the DMA using __SDIO_DMA_ENABLE() macro or Disable it using the macro
+ __SDIO_DMA_DISABLE().
+
+ (+) To control the CPSM (Command Path State Machine) and send
+ commands to the card use the SDIO_SendCommand(SDIOx),
+ SDIO_GetCommandResponse() and SDIO_GetResponse() functions. First, user has
+ to fill the command structure (pointer to SDIO_CmdInitTypeDef) according
+ to the selected command to be sent.
+ The parameters that should be filled are:
+ (++) Command Argument
+ (++) Command Index
+ (++) Command Response type
+ (++) Command Wait
+ (++) CPSM Status (Enable or Disable).
+
+ -@@- To check if the command is well received, read the SDIO_CMDRESP
+ register using the SDIO_GetCommandResponse().
+ The SDIO responses registers (SDIO_RESP1 to SDIO_RESP2), use the
+ SDIO_GetResponse() function.
+
+ (+) To control the DPSM (Data Path State Machine) and send/receive
+ data to/from the card use the SDIO_DataConfig(), SDIO_GetDataCounter(),
+ SDIO_ReadFIFO(), DIO_WriteFIFO() and SDIO_GetFIFOCount() functions.
+
+ *** Read Operations ***
+ =======================
+ [..]
+ (#) First, user has to fill the data structure (pointer to
+ SDIO_DataInitTypeDef) according to the selected data type to be received.
+ The parameters that should be filled are:
+ (++) Data Timeout
+ (++) Data Length
+ (++) Data Block size
+ (++) Data Transfer direction: should be from card (To SDIO)
+ (++) Data Transfer mode
+ (++) DPSM Status (Enable or Disable)
+
+ (#) Configure the SDIO resources to receive the data from the card
+ according to selected transfer mode (Refer to Step 8, 9 and 10).
+
+ (#) Send the selected Read command (refer to step 11).
+
+ (#) Use the SDIO flags/interrupts to check the transfer status.
+
+ *** Write Operations ***
+ ========================
+ [..]
+ (#) First, user has to fill the data structure (pointer to
+ SDIO_DataInitTypeDef) according to the selected data type to be received.
+ The parameters that should be filled are:
+ (++) Data Timeout
+ (++) Data Length
+ (++) Data Block size
+ (++) Data Transfer direction: should be to card (To CARD)
+ (++) Data Transfer mode
+ (++) DPSM Status (Enable or Disable)
+
+ (#) Configure the SDIO resources to send the data to the card according to
+ selected transfer mode.
+
+ (#) Send the selected Write command.
+
+ (#) Use the SDIO flags/interrupts to check the transfer status.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SDMMC_LL SDMMC Low Layer
+ * @brief Low layer module for SD and MMC driver
+ * @{
+ */
+
+#if defined(HAL_SD_MODULE_ENABLED) || defined(HAL_MMC_MODULE_ENABLED)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SDMMC_LL_Exported_Functions SDMMC_LL Exported Functions
+ * @{
+ */
+
+/** @defgroup HAL_SDMMC_LL_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization/de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SDIO according to the specified
+ * parameters in the SDIO_InitTypeDef and create the associated handle.
+ * @param SDIOx: Pointer to SDIO register base
+ * @param Init: SDIO initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_ALL_INSTANCE(SDIOx));
+ assert_param(IS_SDIO_CLOCK_EDGE(Init.ClockEdge));
+ assert_param(IS_SDIO_CLOCK_BYPASS(Init.ClockBypass));
+ assert_param(IS_SDIO_CLOCK_POWER_SAVE(Init.ClockPowerSave));
+ assert_param(IS_SDIO_BUS_WIDE(Init.BusWide));
+ assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl));
+ assert_param(IS_SDIO_CLKDIV(Init.ClockDiv));
+
+ /* Set SDIO configuration parameters */
+ tmpreg |= (Init.ClockEdge |\
+ Init.ClockBypass |\
+ Init.ClockPowerSave |\
+ Init.BusWide |\
+ Init.HardwareFlowControl |\
+ Init.ClockDiv
+ );
+
+ /* Write to SDIO CLKCR */
+ MODIFY_REG(SDIOx->CLKCR, CLKCR_CLEAR_MASK, tmpreg);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SDMMC_LL_Group2 I/O operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### I/O operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SDIO data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read data (word) from Rx FIFO in blocking mode (polling)
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval HAL status
+ */
+uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx)
+{
+ /* Read data from Rx FIFO */
+ return (SDIOx->FIFO);
+}
+
+/**
+ * @brief Write data (word) to Tx FIFO in blocking mode (polling)
+ * @param SDIOx: Pointer to SDIO register base
+ * @param pWriteData: pointer to data to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData)
+{
+ /* Write data to FIFO */
+ SDIOx->FIFO = *pWriteData;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SDIO data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Set SDIO Power state to ON.
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx)
+{
+ /* Set power state to ON */
+ SDIOx->POWER = SDIO_POWER_PWRCTRL;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set SDIO Power state to OFF.
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx)
+{
+ /* Set power state to OFF */
+ SDIOx->POWER = (uint32_t)0x00000000U;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get SDIO Power state.
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval Power status of the controller. The returned value can be one of the
+ * following values:
+ * - 0x00: Power OFF
+ * - 0x02: Power UP
+ * - 0x03: Power ON
+ */
+uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx)
+{
+ return (SDIOx->POWER & SDIO_POWER_PWRCTRL);
+}
+
+/**
+ * @brief Configure the SDIO command path according to the specified parameters in
+ * SDIO_CmdInitTypeDef structure and send the command
+ * @param SDIOx: Pointer to SDIO register base
+ * @param SDIO_CmdInitStruct: pointer to a SDIO_CmdInitTypeDef structure that contains
+ * the configuration information for the SDIO command
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->CmdIndex));
+ assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->Response));
+ assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->WaitForInterrupt));
+ assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->CPSM));
+
+ /* Set the SDIO Argument value */
+ SDIOx->ARG = SDIO_CmdInitStruct->Argument;
+
+ /* Set SDIO command parameters */
+ tmpreg |= (uint32_t)(SDIO_CmdInitStruct->CmdIndex |\
+ SDIO_CmdInitStruct->Response |\
+ SDIO_CmdInitStruct->WaitForInterrupt |\
+ SDIO_CmdInitStruct->CPSM);
+
+ /* Write to SDIO CMD register */
+ MODIFY_REG(SDIOx->CMD, CMD_CLEAR_MASK, tmpreg);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Return the command index of last command for which response received
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval Command index of the last command response received
+ */
+uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx)
+{
+ return (uint8_t)(SDIOx->RESPCMD);
+}
+
+
+/**
+ * @brief Return the response received from the card for the last command
+ * @param SDIO_RESP: Specifies the SDIO response register.
+ * This parameter can be one of the following values:
+ * @arg SDIO_RESP1: Response Register 1
+ * @arg SDIO_RESP2: Response Register 2
+ * @arg SDIO_RESP3: Response Register 3
+ * @arg SDIO_RESP4: Response Register 4
+ * @retval The Corresponding response register value
+ */
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP)
+{
+ __IO uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_RESP(SDIO_RESP));
+
+ /* Get the response */
+ tmp = SDIO_RESP_ADDR + SDIO_RESP;
+
+ return (*(__IO uint32_t *) tmp);
+}
+
+/**
+ * @brief Configure the SDIO data path according to the specified
+ * parameters in the SDIO_DataInitTypeDef.
+ * @param SDIOx: Pointer to SDIO register base
+ * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure
+ * that contains the configuration information for the SDIO command.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->DataLength));
+ assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->DataBlockSize));
+ assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->TransferDir));
+ assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->TransferMode));
+ assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->DPSM));
+
+ /* Set the SDIO Data Timeout value */
+ SDIOx->DTIMER = SDIO_DataInitStruct->DataTimeOut;
+
+ /* Set the SDIO DataLength value */
+ SDIOx->DLEN = SDIO_DataInitStruct->DataLength;
+
+ /* Set the SDIO data configuration parameters */
+ tmpreg |= (uint32_t)(SDIO_DataInitStruct->DataBlockSize |\
+ SDIO_DataInitStruct->TransferDir |\
+ SDIO_DataInitStruct->TransferMode |\
+ SDIO_DataInitStruct->DPSM);
+
+ /* Write to SDIO DCTRL */
+ MODIFY_REG(SDIOx->DCTRL, DCTRL_CLEAR_MASK, tmpreg);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Returns number of remaining data bytes to be transferred.
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval Number of remaining data bytes to be transferred
+ */
+uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx)
+{
+ return (SDIOx->DCOUNT);
+}
+
+/**
+ * @brief Get the FIFO data
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval Data received
+ */
+uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx)
+{
+ return (SDIOx->FIFO);
+}
+
+
+/**
+ * @brief Sets one of the two options of inserting read wait interval.
+ * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
+ * This parameter can be:
+ * @arg SDIO_READ_WAIT_MODE_CLK: Read Wait control by stopping SDIOCLK
+ * @arg SDIO_READ_WAIT_MODE_DATA2: Read Wait control using SDIO_DATA2
+ * @retval None
+ */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode));
+
+ *(__IO uint32_t *)DCTRL_RWMOD_BB = SDIO_ReadWaitMode;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#endif /* (HAL_SD_MODULE_ENABLED) || (HAL_MMC_MODULE_ENABLED) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,919 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_sdmmc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SDMMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_SDMMC_H
+#define __STM32F4xx_LL_SDMMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_Driver
+ * @{
+ */
+
+/** @addtogroup SDMMC_LL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types
+ * @{
+ */
+
+/**
+ * @brief SDMMC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SDIO_Clock_Edge */
+
+ uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+ uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
+ disabled when the bus is idle.
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+ uint32_t BusWide; /*!< Specifies the SDIO bus width.
+ This parameter can be a value of @ref SDIO_Bus_Wide */
+
+ uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+ uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+}SDIO_InitTypeDef;
+
+
+/**
+ * @brief SDIO Command Control structure
+ */
+typedef struct
+{
+ uint32_t Argument; /*!< Specifies the SDIO command argument which is sent
+ to a card as part of a command message. If a command
+ contains an argument, it must be loaded into this register
+ before writing the command to the command register. */
+
+ uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and
+ Max_Data = 64 */
+
+ uint32_t Response; /*!< Specifies the SDIO response type.
+ This parameter can be a value of @ref SDIO_Response_Type */
+
+ uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+ uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_CPSM_State */
+}SDIO_CmdInitTypeDef;
+
+
+/**
+ * @brief SDIO Data Control structure
+ */
+typedef struct
+{
+ uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
+
+ uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */
+
+ uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer.
+ This parameter can be a value of @ref SDIO_Data_Block_Size */
+
+ uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer
+ is a read or write.
+ This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+ uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
+ This parameter can be a value of @ref SDIO_Transfer_Type */
+
+ uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_DPSM_State */
+}SDIO_DataInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants
+ * @{
+ */
+
+/** @defgroup SDIO_Clock_Edge Clock Edge
+ * @{
+ */
+#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000U)
+#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE
+
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \
+ ((EDGE) == SDIO_CLOCK_EDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Bypass Clock Bypass
+ * @{
+ */
+#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS
+
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \
+ ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Power_Save Clock Power Saving
+ * @{
+ */
+#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV
+
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \
+ ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Bus_Wide Bus Width
+ * @{
+ */
+#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000U)
+#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0
+#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1
+
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \
+ ((WIDE) == SDIO_BUS_WIDE_4B) || \
+ ((WIDE) == SDIO_BUS_WIDE_8B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control
+ * @{
+ */
+#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN
+
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \
+ ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Division Clock Division
+ * @{
+ */
+#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFFU)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Command_Index Command Index
+ * @{
+ */
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40U)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Type Response Type
+ * @{
+ */
+#define SDIO_RESPONSE_NO ((uint32_t)0x00000000U)
+#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0
+#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP
+
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \
+ ((RESPONSE) == SDIO_RESPONSE_SHORT) || \
+ ((RESPONSE) == SDIO_RESPONSE_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt
+ * @{
+ */
+#define SDIO_WAIT_NO ((uint32_t)0x00000000U)
+#define SDIO_WAIT_IT SDIO_CMD_WAITINT
+#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND
+
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \
+ ((WAIT) == SDIO_WAIT_IT) || \
+ ((WAIT) == SDIO_WAIT_PEND))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_CPSM_State CPSM State
+ * @{
+ */
+#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN
+
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \
+ ((CPSM) == SDIO_CPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Registers Response Register
+ * @{
+ */
+#define SDIO_RESP1 ((uint32_t)0x00000000U)
+#define SDIO_RESP2 ((uint32_t)0x00000004U)
+#define SDIO_RESP3 ((uint32_t)0x00000008U)
+#define SDIO_RESP4 ((uint32_t)0x0000000CU)
+
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \
+ ((RESP) == SDIO_RESP2) || \
+ ((RESP) == SDIO_RESP3) || \
+ ((RESP) == SDIO_RESP4))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Length Data Lenght
+ * @{
+ */
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Block_Size Data Block Size
+ * @{
+ */
+#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000U)
+#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0
+#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1
+#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030U)
+#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2
+#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050U)
+#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060U)
+#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070U)
+#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3
+#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090U)
+#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0U)
+#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0U)
+#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0U)
+#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0U)
+#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0U)
+
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16384B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Direction Transfer Direction
+ * @{
+ */
+#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000U)
+#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR
+
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \
+ ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Type Transfer Type
+ * @{
+ */
+#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000U)
+#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE
+
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \
+ ((MODE) == SDIO_TRANSFER_MODE_STREAM))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_DPSM_State DPSM State
+ * @{
+ */
+#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN
+
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\
+ ((DPSM) == SDIO_DPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode
+ * @{
+ */
+#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000U)
+#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000001U)
+
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
+ ((MODE) == SDIO_READ_WAIT_MODE_DATA2))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Interrupt_sources Interrupt Sources
+ * @{
+ */
+#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_IT_CMDREND SDIO_STA_CMDREND
+#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_IT_DATAEND SDIO_STA_DATAEND
+#define SDIO_IT_STBITERR SDIO_STA_STBITERR
+#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_IT_CMDACT SDIO_STA_CMDACT
+#define SDIO_IT_TXACT SDIO_STA_TXACT
+#define SDIO_IT_RXACT SDIO_STA_RXACT
+#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Flags Flags
+ * @{
+ */
+#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND
+#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND
+#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR
+#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT
+#define SDIO_FLAG_TXACT SDIO_STA_TXACT
+#define SDIO_FLAG_RXACT SDIO_STA_RXACT
+#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros
+ * @{
+ */
+
+/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region
+ * @{
+ */
+/* ------------ SDIO registers bit address in the alias region -------------- */
+#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET (SDIO_OFFSET + 0x04U)
+#define CLKEN_BITNUMBER 0x08U
+#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32U) + (CLKEN_BITNUMBER * 4U))
+
+/* --- CMD Register ---*/
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET (SDIO_OFFSET + 0x0CU)
+#define SDIOSUSPEND_BITNUMBER 0x0BU
+#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (SDIOSUSPEND_BITNUMBER * 4U))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BITNUMBER 0x0CU
+#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ENCMDCOMPL_BITNUMBER * 4U))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BITNUMBER 0x0DU
+#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (NIEN_BITNUMBER * 4U))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BITNUMBER 0x0EU
+#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ATACMD_BITNUMBER * 4U))
+
+/* --- DCTRL Register ---*/
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET (SDIO_OFFSET + 0x2CU)
+#define DMAEN_BITNUMBER 0x03U
+#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (DMAEN_BITNUMBER * 4U))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BITNUMBER 0x08U
+#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTART_BITNUMBER * 4U))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BITNUMBER 0x09U
+#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTOP_BITNUMBER * 4U))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BITNUMBER 0x0AU
+#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWMOD_BITNUMBER * 4U))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BITNUMBER 0x0BU
+#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (SDIOEN_BITNUMBER * 4U))
+/**
+ * @}
+ */
+
+/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions
+ * @brief SDMMC_LL registers bit address in the alias region
+ * @{
+ */
+
+/* ---------------------- SDIO registers bit mask --------------------------- */
+/* --- CLKCR Register ---*/
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\
+ SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\
+ SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN))
+
+/* --- PWRCTRL Register ---*/
+/* --- DCTRL Register ---*/
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\
+ SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE))
+
+/* --- CMD Register ---*/
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\
+ SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\
+ SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND))
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14U))
+
+/* SDIO Initialization Frequency (400KHz max) */
+#define SDIO_INIT_CLK_DIV ((uint8_t)0x76U)
+
+/* SDIO Data Transfer Frequency (25MHz max) */
+#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SDIO device.
+ * @retval None
+ */
+#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO device.
+ * @retval None
+ */
+#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified SDIO flag is set or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SDIO_FLAG (SET or RESET).
+ */
+#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET)
+
+
+/**
+ * @brief Clears the SDIO pending flags.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified SDIO interrupt has occurred or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SDIO_IT (SET or RESET).
+ */
+#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clears the SDIO's interrupt pending bits.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__))
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE)
+
+/**
+ * @brief Disable Start the SD I/O Read Wait operations.
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE)
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE)
+
+/**
+ * @brief Disable Stop the SD I/O Read Wait operations.
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Mode Operation.
+ * @retval None
+ */
+#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Mode Operation.
+ * @retval None
+ */
+#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Suspend command sending.
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Suspend command sending.
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE)
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Enable the command completion signal.
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE)
+
+/**
+ * @brief Disable the command completion signal.
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE)
+
+/**
+ * @brief Enable the CE-ATA interrupt.
+ * @retval None
+ */
+#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0U)
+
+/**
+ * @brief Disable the CE-ATA interrupt.
+ * @retval None
+ */
+#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1U)
+
+/**
+ * @brief Enable send CE-ATA command (CMD61).
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE)
+
+/**
+ * @brief Disable send CE-ATA command (CMD61).
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\
+ STM32F412Cx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDMMC_LL_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+/** @addtogroup HAL_SDMMC_LL_Group1
+ * @{
+ */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init);
+/**
+ * @}
+ */
+
+/* I/O operation functions *****************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group3
+ * @{
+ */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx);
+
+/* Command path state machine (CPSM) management functions */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+
+/* Data path state machine (DPSM) management functions */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx);
+
+/* SDIO IO Cards mode management functions */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_SDMMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1711 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_usb.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief USB Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
+
+ (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
+
+ (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+
+/** @addtogroup STM32F4xx_LL_USB_DRIVER
+ * @{
+ */
+
+#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx);
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup LL_USB_Exported_Functions USB Low Layer Exported Functions
+ * @{
+ */
+
+/** @defgroup LL_USB_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization/de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the USB Core
+ * @param USBx: USB Instance
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ if (cfg.phy_itface == USB_OTG_ULPI_PHY)
+ {
+
+ USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
+
+ /* Init The ULPI Interface */
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL);
+
+ /* Select vbus source */
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
+ if(cfg.use_external_vbus == 1U)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD;
+ }
+ /* Reset after a PHY select */
+ USB_CoreReset(USBx);
+ }
+ else /* FS interface (embedded Phy) */
+ {
+ /* Select FS Embedded PHY */
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
+
+ /* Reset after a PHY select and set Host mode */
+ USB_CoreReset(USBx);
+
+ /* Deactivate the power down*/
+ USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
+ }
+
+ if(cfg.dma_enable == ENABLE)
+ {
+ USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EnableGlobalInt
+ * Enables the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT;
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_DisableGlobalInt
+ * Disable the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT;
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetCurrentMode : Set functional mode
+ * @param USBx : Selected device
+ * @param mode : current core mode
+ * This parameter can be one of these values:
+ * @arg USB_OTG_DEVICE_MODE: Peripheral mode
+ * @arg USB_OTG_HOST_MODE: Host mode
+ * @arg USB_OTG_DRD_MODE: Dual Role Device mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode)
+{
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD);
+
+ if ( mode == USB_OTG_HOST_MODE)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD;
+ }
+ else if ( mode == USB_OTG_DEVICE_MODE)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
+ }
+ HAL_Delay(50U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevInit : Initializes the USB_OTG controller registers
+ * for device mode
+ * @param USBx : Selected device
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ uint32_t i = 0U;
+
+ /*Activate VBUS Sensing B */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+ USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+
+ if (cfg.vbus_sensing_enable == 0U)
+ {
+ /* Deactivate VBUS Sensing B */
+ USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
+
+ /* B-peripheral session valid override enable*/
+ USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
+ USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
+ }
+#else
+ USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
+
+ if (cfg.vbus_sensing_enable == 0U)
+ {
+ USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+ }
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+ /* Restart the Phy Clock */
+ USBx_PCGCCTL = 0U;
+
+ /* Device mode configuration */
+ USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80;
+
+ if(cfg.phy_itface == USB_OTG_ULPI_PHY)
+ {
+ if(cfg.speed == USB_OTG_SPEED_HIGH)
+ {
+ /* Set High speed phy */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH);
+ }
+ else
+ {
+ /* set High speed phy in Full speed mode */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH_IN_FULL);
+ }
+ }
+ else
+ {
+ /* Set Full speed phy */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL);
+ }
+
+ /* Flush the FIFOs */
+ USB_FlushTxFifo(USBx , 0x10U); /* all Tx FIFOs */
+ USB_FlushRxFifo(USBx);
+
+ /* Clear all pending Device Interrupts */
+ USBx_DEVICE->DIEPMSK = 0U;
+ USBx_DEVICE->DOEPMSK = 0U;
+ USBx_DEVICE->DAINT = 0xFFFFFFFFU;
+ USBx_DEVICE->DAINTMSK = 0U;
+
+ for (i = 0U; i < cfg.dev_endpoints; i++)
+ {
+ if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
+ {
+ USBx_INEP(i)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK);
+ }
+ else
+ {
+ USBx_INEP(i)->DIEPCTL = 0U;
+ }
+
+ USBx_INEP(i)->DIEPTSIZ = 0U;
+ USBx_INEP(i)->DIEPINT = 0xFFU;
+ }
+
+ for (i = 0U; i < cfg.dev_endpoints; i++)
+ {
+ if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
+ {
+ USBx_OUTEP(i)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK);
+ }
+ else
+ {
+ USBx_OUTEP(i)->DOEPCTL = 0U;
+ }
+
+ USBx_OUTEP(i)->DOEPTSIZ = 0U;
+ USBx_OUTEP(i)->DOEPINT = 0xFFU;
+ }
+
+ USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM);
+
+ if (cfg.dma_enable == 1U)
+ {
+ /*Set threshold parameters */
+ USBx_DEVICE->DTHRCTL = (USB_OTG_DTHRCTL_TXTHRLEN_6 | USB_OTG_DTHRCTL_RXTHRLEN_6);
+ USBx_DEVICE->DTHRCTL |= (USB_OTG_DTHRCTL_RXTHREN | USB_OTG_DTHRCTL_ISOTHREN | USB_OTG_DTHRCTL_NONISOTHREN);
+
+ i= USBx_DEVICE->DTHRCTL;
+ }
+
+ /* Disable all interrupts. */
+ USBx->GINTMSK = 0U;
+
+ /* Clear any pending interrupts */
+ USBx->GINTSTS = 0xBFFFFFFFU;
+
+ /* Enable the common interrupts */
+ if (cfg.dma_enable == DISABLE)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+ }
+
+ /* Enable interrupts matching to the Device mode ONLY */
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\
+ USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\
+ USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM|\
+ USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+
+ if(cfg.Sof_enable)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM;
+ }
+
+ if (cfg.vbus_sensing_enable == ENABLE)
+ {
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT);
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO
+ * @param USBx : Selected device
+ * @param num : FIFO number
+ * This parameter can be a value from 1 to 15
+ 15 means Flush all Tx FIFOs
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num )
+{
+ uint32_t count = 0U;
+
+ USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 6));
+
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_FlushRxFifo : Flush Rx FIFO
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t count = 0U;
+
+ USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
+
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetDevSpeed :Initializes the DevSpd field of DCFG register
+ * depending the PHY type and the enumeration speed of the device.
+ * @param USBx : Selected device
+ * @param speed : device speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ * @retval Hal status
+ */
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed)
+{
+ USBx_DEVICE->DCFG |= speed;
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_GetDevSpeed :Return the Dev Speed
+ * @param USBx : Selected device
+ * @retval speed : device speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ */
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint8_t speed = 0U;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ)
+ {
+ speed = USB_OTG_SPEED_HIGH;
+ }
+ else if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)||
+ ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ))
+ {
+ speed = USB_OTG_SPEED_FULL;
+ }
+ else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+ {
+ speed = USB_OTG_SPEED_LOW;
+ }
+
+ return speed;
+}
+
+/**
+ * @brief Activate and configure an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1U)
+ {
+ USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num)));
+
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+ }
+ }
+ else
+ {
+ USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U);
+
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
+ }
+ }
+ return HAL_OK;
+}
+/**
+ * @brief Activate and configure a dedicated endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ static __IO uint32_t debug = 0U;
+
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1U)
+ {
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+ }
+
+
+ debug |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+
+ USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num)));
+ }
+ else
+ {
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DOEPCTL_USBAEP));
+
+ debug = (uint32_t)(((uint32_t )USBx) + USB_OTG_OUT_ENDPOINT_BASE + (0U)*USB_OTG_EP_REG_SIZE);
+ debug = (uint32_t )&USBx_OUTEP(ep->num)->DOEPCTL;
+ debug |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DOEPCTL_USBAEP));
+ }
+
+ USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U);
+ }
+
+ return HAL_OK;
+}
+/**
+ * @brief De-activate and de-initialize an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1U)
+ {
+ USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num))));
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num))));
+ USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+ }
+ else
+ {
+ USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U));
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U));
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief De-activate and de-initialize a dedicated endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num))));
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U));
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EPStartXfer : setup and starts a transfer over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+ uint16_t pktcnt = 0U;
+
+ /* IN endpoint */
+ if (ep->is_in == 1U)
+ {
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ }
+ else
+ {
+ /* Program the transfer size and packet count
+ * as follows: xfersize = N * maxpacket +
+ * short_packet pktcnt = N + (short_packet
+ * exist ? 1 : 0)
+ */
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1U)/ ep->maxpacket) << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29U));
+ }
+ }
+
+ if (dma == 1U)
+ {
+ USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+ }
+ else
+ {
+ if (ep->type != EP_TYPE_ISOC)
+ {
+ /* Enable the Tx FIFO Empty Interrupt for this EP */
+ if (ep->xfer_len > 0U)
+ {
+ USBx_DEVICE->DIEPEMPMSK |= 1U << ep->num;
+ }
+ }
+ }
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ if ((USBx_DEVICE->DSTS & ( 1U << 8U )) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM;
+ }
+ else
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
+ }
+ }
+
+ /* EP enable, IN data in FIFO */
+ USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len, dma);
+ }
+ }
+ else /* OUT endpoint */
+ {
+ /* Program the transfer size and packet count as follows:
+ * pktcnt = N
+ * xfersize = N * maxpacket
+ */
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+ if (ep->xfer_len == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19U));
+ }
+ else
+ {
+ pktcnt = (ep->xfer_len + ep->maxpacket -1U)/ ep->maxpacket;
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19U));
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt));
+ }
+
+ if (dma == 1U)
+ {
+ USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)ep->xfer_buff;
+ }
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ if ((USBx_DEVICE->DSTS & ( 1U << 8U )) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM;
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
+ }
+ }
+ /* EP enable */
+ USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+ /* IN endpoint */
+ if (ep->is_in == 1U)
+ {
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ }
+ else
+ {
+ /* Program the transfer size and packet count
+ * as follows: xfersize = N * maxpacket +
+ * short_packet pktcnt = N + (short_packet
+ * exist ? 1 : 0)
+ */
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+
+ if(ep->xfer_len > ep->maxpacket)
+ {
+ ep->xfer_len = ep->maxpacket;
+ }
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+
+ }
+
+ if (dma == 1)
+ {
+ USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+ }
+ else
+ {
+ /* Enable the Tx FIFO Empty Interrupt for this EP */
+ if (ep->xfer_len > 0U)
+ {
+ USBx_DEVICE->DIEPEMPMSK |= 1U << (ep->num);
+ }
+ }
+
+ /* EP enable, IN data in FIFO */
+ USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+ }
+ else /* OUT endpoint */
+ {
+ /* Program the transfer size and packet count as follows:
+ * pktcnt = N
+ * xfersize = N * maxpacket
+ */
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+ if (ep->xfer_len > 0U)
+ {
+ ep->xfer_len = ep->maxpacket;
+ }
+
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19U));
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ((ep->maxpacket)));
+
+
+ if (dma == 1U)
+ {
+ USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)(ep->xfer_buff);
+ }
+
+ /* EP enable */
+ USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param src : pointer to source buffer
+ * @param ch_ep_num : endpoint or host channel number
+ * @param len : Number of bytes to write
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma)
+{
+ uint32_t count32b = 0U , i = 0U;
+
+ if (dma == 0U)
+ {
+ count32b = (len + 3U) / 4U;
+ for (i = 0U; i < count32b; i++, src += 4U)
+ {
+ USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src);
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param src : source pointer
+ * @param ch_ep_num : endpoint or host channel number
+ * @param len : Number of bytes to read
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval pointer to destination buffer
+ */
+void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
+{
+ uint32_t i=0U;
+ uint32_t count32b = (len + 3U) / 4U;
+
+ for ( i = 0U; i < count32b; i++, dest += 4U )
+ {
+ *(__packed uint32_t *)dest = USBx_DFIFO(0U);
+
+ }
+ return ((void *)dest);
+}
+
+/**
+ * @brief USB_EPSetStall : set a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1U)
+ {
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS);
+ }
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL;
+ }
+ else
+ {
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS);
+ }
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL;
+ }
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_EPClearStall : Clear a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
+ if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+ }
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
+ if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_StopDevice : Stop the usb device mode
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t i;
+
+ /* Clear Pending interrupt */
+ for (i = 0U; i < 15U ; i++)
+ {
+ USBx_INEP(i)->DIEPINT = 0xFFU;
+ USBx_OUTEP(i)->DOEPINT = 0xFFU;
+ }
+ USBx_DEVICE->DAINT = 0xFFFFFFFFU;
+
+ /* Clear interrupt masks */
+ USBx_DEVICE->DIEPMSK = 0U;
+ USBx_DEVICE->DOEPMSK = 0U;
+ USBx_DEVICE->DAINTMSK = 0U;
+
+ /* Flush the FIFO */
+ USB_FlushRxFifo(USBx);
+ USB_FlushTxFifo(USBx , 0x10U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetDevAddress : Stop the usb device mode
+ * @param USBx : Selected device
+ * @param address : new device address to be assigned
+ * This parameter can be a value from 0 to 255
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address)
+{
+ USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD);
+ USBx_DEVICE->DCFG |= (address << 4U) & USB_OTG_DCFG_DAD ;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ;
+ HAL_Delay(3U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS ;
+ HAL_Delay(3U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadInterrupts: return the global USB interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t v = 0U;
+
+ v = USBx->GINTSTS;
+ v &= USBx->GINTMSK;
+ return v;
+}
+
+/**
+ * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t v;
+ v = USBx_DEVICE->DAINT;
+ v &= USBx_DEVICE->DAINTMSK;
+ return ((v & 0xffff0000U) >> 16U);
+}
+
+/**
+ * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t v;
+ v = USBx_DEVICE->DAINT;
+ v &= USBx_DEVICE->DAINTMSK;
+ return ((v & 0xFFFFU));
+}
+
+/**
+ * @brief Returns Device OUT EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device OUT EP Interrupt register
+ */
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+ uint32_t v;
+ v = USBx_OUTEP(epnum)->DOEPINT;
+ v &= USBx_DEVICE->DOEPMSK;
+ return v;
+}
+
+/**
+ * @brief Returns Device IN EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device IN EP Interrupt register
+ */
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+ uint32_t v, msk, emp;
+
+ msk = USBx_DEVICE->DIEPMSK;
+ emp = USBx_DEVICE->DIEPEMPMSK;
+ msk |= ((emp >> epnum) & 0x1U) << 7U;
+ v = USBx_INEP(epnum)->DIEPINT & msk;
+ return v;
+}
+
+/**
+ * @brief USB_ClearInterrupts: clear a USB interrupt
+ * @param USBx : Selected device
+ * @param interrupt : interrupt flag
+ * @retval None
+ */
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt)
+{
+ USBx->GINTSTS |= interrupt;
+}
+
+/**
+ * @brief Returns USB core mode
+ * @param USBx : Selected device
+ * @retval return core mode : Host or Device
+ * This parameter can be one of these values:
+ * 0 : Host
+ * 1 : Device
+ */
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx)
+{
+ return ((USBx->GINTSTS ) & 0x1U);
+}
+
+
+/**
+ * @brief Activate EP0 for Setup transactions
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx)
+{
+ /* Set the MPS of the IN EP based on the enumeration speed */
+ USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+ {
+ USBx_INEP(0U)->DIEPCTL |= 3U;
+ }
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Prepare the EP0 to start the first control setup
+ * @param USBx : Selected device
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @param psetup : pointer to setup packet
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup)
+{
+ USBx_OUTEP(0U)->DOEPTSIZ = 0U;
+ USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U);
+ USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT;
+
+ if (dma == 1U)
+ {
+ USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup;
+ /* EP enable */
+ USBx_OUTEP(0U)->DOEPCTL = 0x80008000U;
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Reset the USB Core (needed after USB clock settings change)
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t count = 0U;
+
+ /* Wait for AHB master IDLE state. */
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U);
+
+ /* Core Soft Reset */
+ count = 0U;
+ USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
+
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_HostInit : Initializes the USB OTG controller registers
+ * for Host mode
+ * @param USBx : Selected device
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ uint32_t i;
+
+ /* Restart the Phy Clock */
+ USBx_PCGCCTL = 0U;
+
+ /* Activate VBUS Sensing B */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+ USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+#else
+ USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN);
+ USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN);
+ USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+ /* Disable the FS/LS support mode only */
+ if((cfg.speed == USB_OTG_SPEED_FULL)&&
+ (USBx != USB_OTG_FS))
+ {
+ USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS;
+ }
+ else
+ {
+ USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS);
+ }
+
+ /* Make sure the FIFOs are flushed. */
+ USB_FlushTxFifo(USBx, 0x10U); /* all Tx FIFOs */
+ USB_FlushRxFifo(USBx);
+
+ /* Clear all pending HC Interrupts */
+ for (i = 0U; i < cfg.Host_channels; i++)
+ {
+ USBx_HC(i)->HCINT = 0xFFFFFFFFU;
+ USBx_HC(i)->HCINTMSK = 0U;
+ }
+
+ /* Enable VBUS driving */
+ USB_DriveVbus(USBx, 1U);
+
+ HAL_Delay(200U);
+
+ /* Disable all interrupts. */
+ USBx->GINTMSK = 0U;
+
+ /* Clear any pending interrupts */
+ USBx->GINTSTS = 0xFFFFFFFFU;
+
+ if(USBx == USB_OTG_FS)
+ {
+ /* set Rx FIFO size */
+ USBx->GRXFSIZ = (uint32_t )0x80U;
+ USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60U << 16U)& USB_OTG_NPTXFD) | 0x80U);
+ USBx->HPTXFSIZ = (uint32_t )(((0x40U << 16U)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U);
+ }
+ else
+ {
+ /* set Rx FIFO size */
+ USBx->GRXFSIZ = (uint32_t )0x200U;
+ USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x100U << 16U)& USB_OTG_NPTXFD) | 0x200U);
+ USBx->HPTXFSIZ = (uint32_t )(((0xE0U << 16U)& USB_OTG_HPTXFSIZ_PTXFD) | 0x300U);
+ }
+
+ /* Enable the common interrupts */
+ if (cfg.dma_enable == DISABLE)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+ }
+
+ /* Enable interrupts matching to the Host mode ONLY */
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM |\
+ USB_OTG_GINTMSK_SOFM |USB_OTG_GINTSTS_DISCINT|\
+ USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the
+ * HCFG register on the PHY type and set the right frame interval
+ * @param USBx : Selected device
+ * @param freq : clock frequency
+ * This parameter can be one of these values:
+ * HCFG_48_MHZ : Full Speed 48 MHz Clock
+ * HCFG_6_MHZ : Low Speed 6 MHz Clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq)
+{
+ USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS);
+ USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS);
+
+ if (freq == HCFG_48_MHZ)
+ {
+ USBx_HOST->HFIR = (uint32_t)48000U;
+ }
+ else if (freq == HCFG_6_MHZ)
+ {
+ USBx_HOST->HFIR = (uint32_t)6000U;
+ }
+ return HAL_OK;
+}
+
+/**
+* @brief USB_OTG_ResetPort : Reset Host Port
+ * @param USBx : Selected device
+ * @retval HAL status
+ * @note (1)The application must wait at least 10 ms
+ * before clearing the reset bit.
+ */
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx)
+{
+ __IO uint32_t hprt0;
+
+ hprt0 = USBx_HPRT0;
+
+ hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0);
+ HAL_Delay (10U); /* See Note #1 */
+ USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0);
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DriveVbus : activate or de-activate vbus
+ * @param state : VBUS state
+ * This parameter can be one of these values:
+ * 0 : VBUS Active
+ * 1 : VBUS Inactive
+ * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state)
+{
+ __IO uint32_t hprt0;
+
+ hprt0 = USBx_HPRT0;
+ hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U))
+ {
+ USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0);
+ }
+ if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U))
+ {
+ USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Return Host Core speed
+ * @param USBx : Selected device
+ * @retval speed : Host speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ */
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx)
+{
+ __IO uint32_t hprt0;
+
+ hprt0 = USBx_HPRT0;
+ return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17U);
+}
+
+/**
+ * @brief Return Host Current Frame number
+ * @param USBx : Selected device
+ * @retval current frame number
+*/
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx)
+{
+ return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM);
+}
+
+/**
+ * @brief Initialize a host channel
+ * @param USBx : Selected device
+ * @param ch_num : Channel number
+ * This parameter can be a value from 1 to 15
+ * @param epnum : Endpoint number
+ * This parameter can be a value from 1 to 15
+ * @param dev_address : Current device address
+ * This parameter can be a value from 0 to 255
+ * @param speed : Current device speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ * @param ep_type : Endpoint Type
+ * This parameter can be one of these values:
+ * @arg EP_TYPE_CTRL: Control type
+ * @arg EP_TYPE_ISOC: Isochronous type
+ * @arg EP_TYPE_BULK: Bulk type
+ * @arg EP_TYPE_INTR: Interrupt type
+ * @param mps : Max Packet Size
+ * This parameter can be a value from 0 to32K
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps)
+{
+
+ /* Clear old interrupt conditions for this host channel. */
+ USBx_HC(ch_num)->HCINT = 0xFFFFFFFFU;
+
+ /* Enable channel interrupts required for this transfer. */
+ switch (ep_type)
+ {
+ case EP_TYPE_CTRL:
+ case EP_TYPE_BULK:
+
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_STALLM |\
+ USB_OTG_HCINTMSK_TXERRM |\
+ USB_OTG_HCINTMSK_DTERRM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_NAKM ;
+
+ if (epnum & 0x80U)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+ }
+ else
+ {
+ if(USBx != USB_OTG_FS)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+ }
+ }
+ break;
+
+ case EP_TYPE_INTR:
+
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_STALLM |\
+ USB_OTG_HCINTMSK_TXERRM |\
+ USB_OTG_HCINTMSK_DTERRM |\
+ USB_OTG_HCINTMSK_NAKM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_FRMORM ;
+
+ if (epnum & 0x80U)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+ }
+
+ break;
+ case EP_TYPE_ISOC:
+
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_ACKM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_FRMORM ;
+
+ if (epnum & 0x80U)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM);
+ }
+ break;
+ }
+
+ /* Enable the top level host channel interrupt. */
+ USBx_HOST->HAINTMSK |= (1 << ch_num);
+
+ /* Make sure host channel interrupts are enabled. */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM;
+
+ /* Program the HCCHAR register */
+ USBx_HC(ch_num)->HCCHAR = (((dev_address << 22U) & USB_OTG_HCCHAR_DAD) |\
+ (((epnum & 0x7FU)<< 11U) & USB_OTG_HCCHAR_EPNUM)|\
+ ((((epnum & 0x80U) == 0x80U)<< 15U) & USB_OTG_HCCHAR_EPDIR)|\
+ (((speed == USB_OTG_SPEED_LOW)<< 17U) & USB_OTG_HCCHAR_LSDEV)|\
+ ((ep_type << 18U) & USB_OTG_HCCHAR_EPTYP)|\
+ (mps & USB_OTG_HCCHAR_MPSIZ));
+
+ if (ep_type == EP_TYPE_INTR)
+ {
+ USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start a transfer over a host channel
+ * @param USBx : Selected device
+ * @param hc : pointer to host channel structure
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL state
+ */
+#if defined (__CC_ARM) /*!< ARM Compiler */
+#pragma O0
+#elif defined (__GNUC__) /*!< GNU Compiler */
+#pragma GCC optimize ("O0")
+#endif /* __CC_ARM */
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma)
+{
+ uint8_t is_oddframe = 0U;
+ uint16_t len_words = 0U;
+ uint16_t num_packets = 0U;
+ uint16_t max_hc_pkt_count = 256U;
+ uint32_t tmpreg = 0U;
+
+ if((USBx != USB_OTG_FS) && (hc->speed == USB_OTG_SPEED_HIGH))
+ {
+ if((dma == 0U) && (hc->do_ping == 1U))
+ {
+ USB_DoPing(USBx, hc->ch_num);
+ return HAL_OK;
+ }
+ else if(dma == 1U)
+ {
+ USBx_HC(hc->ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+ hc->do_ping = 0U;
+ }
+ }
+
+ /* Compute the expected number of packets associated to the transfer */
+ if (hc->xfer_len > 0U)
+ {
+ num_packets = (hc->xfer_len + hc->max_packet - 1U) / hc->max_packet;
+
+ if (num_packets > max_hc_pkt_count)
+ {
+ num_packets = max_hc_pkt_count;
+ hc->xfer_len = num_packets * hc->max_packet;
+ }
+ }
+ else
+ {
+ num_packets = 1U;
+ }
+ if (hc->ep_is_in)
+ {
+ hc->xfer_len = num_packets * hc->max_packet;
+ }
+
+ /* Initialize the HCTSIZn register */
+ USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\
+ ((num_packets << 19U) & USB_OTG_HCTSIZ_PKTCNT) |\
+ (((hc->data_pid) << 29U) & USB_OTG_HCTSIZ_DPID);
+
+ if (dma)
+ {
+ /* xfer_buff MUST be 32-bits aligned */
+ USBx_HC(hc->ch_num)->HCDMA = (uint32_t)hc->xfer_buff;
+ }
+
+ is_oddframe = (USBx_HOST->HFNUM & 0x01U) ? 0U : 1U;
+ USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM;
+ USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29U);
+
+ /* Set host channel enable */
+ tmpreg = USBx_HC(hc->ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc->ch_num)->HCCHAR = tmpreg;
+
+ if (dma == 0U) /* Slave mode */
+ {
+ if((hc->ep_is_in == 0U) && (hc->xfer_len > 0U))
+ {
+ switch(hc->ep_type)
+ {
+ /* Non periodic transfer */
+ case EP_TYPE_CTRL:
+ case EP_TYPE_BULK:
+
+ len_words = (hc->xfer_len + 3U) / 4U;
+
+ /* check if there is enough space in FIFO space */
+ if(len_words > (USBx->HNPTXSTS & 0xFFFFU))
+ {
+ /* need to process data in nptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
+ }
+ break;
+ /* Periodic transfer */
+ case EP_TYPE_INTR:
+ case EP_TYPE_ISOC:
+ len_words = (hc->xfer_len + 3U) / 4U;
+ /* check if there is enough space in FIFO space */
+ if(len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */
+ {
+ /* need to process data in ptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Write packet into the Tx FIFO. */
+ USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len, 0);
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read all host channel interrupts status
+ * @param USBx : Selected device
+ * @retval HAL state
+ */
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ return ((USBx_HOST->HAINT) & 0xFFFFU);
+}
+
+/**
+ * @brief Halt a host channel
+ * @param USBx : Selected device
+ * @param hc_num : Host Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num)
+{
+ uint32_t count = 0U;
+
+ /* Check for space in the request queue to issue the halt. */
+ if (((((USBx_HC(hc_num)->HCCHAR) & USB_OTG_HCCHAR_EPTYP) >> 18) == HCCHAR_CTRL) || (((((USBx_HC(hc_num)->HCCHAR) &
+ USB_OTG_HCCHAR_EPTYP) >> 18) == HCCHAR_BULK)))
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+ if ((USBx->HNPTXSTS & 0xFF0000U) == 0U)
+ {
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ do
+ {
+ if (++count > 1000U)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+ if ((USBx_HOST->HPTXSTS & 0xFFFFU) == 0U)
+ {
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ do
+ {
+ if (++count > 1000U)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initiate Do Ping protocol
+ * @param USBx : Selected device
+ * @param hc_num : Host Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num)
+{
+ uint8_t num_packets = 1U;
+ uint32_t tmpreg = 0U;
+
+ USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19U) & USB_OTG_HCTSIZ_PKTCNT) |\
+ USB_OTG_HCTSIZ_DOPING;
+
+ /* Set host channel enable */
+ tmpreg = USBx_HC(ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(ch_num)->HCCHAR = tmpreg;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop Host Core
+ * @param USBx : Selected device
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint8_t i;
+ uint32_t count = 0U;
+ uint32_t value;
+
+ USB_DisableGlobalInt(USBx);
+
+ /* Flush FIFO */
+ USB_FlushTxFifo(USBx, 0x10U);
+ USB_FlushRxFifo(USBx);
+
+ /* Flush out any leftover queued requests. */
+ for (i = 0U; i <= 15U; i++)
+ {
+
+ value = USBx_HC(i)->HCCHAR ;
+ value |= USB_OTG_HCCHAR_CHDIS;
+ value &= ~USB_OTG_HCCHAR_CHENA;
+ value &= ~USB_OTG_HCCHAR_EPDIR;
+ USBx_HC(i)->HCCHAR = value;
+ }
+
+ /* Halt all channels to put them into a known state. */
+ for (i = 0U; i <= 15U; i++)
+ {
+ value = USBx_HC(i)->HCCHAR ;
+
+ value |= USB_OTG_HCCHAR_CHDIS;
+ value |= USB_OTG_HCCHAR_CHENA;
+ value &= ~USB_OTG_HCCHAR_EPDIR;
+
+ USBx_HC(i)->HCCHAR = value;
+ do
+ {
+ if (++count > 1000U)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+
+ /* Clear any pending Host interrupts */
+ USBx_HOST->HAINT = 0xFFFFFFFFU;
+ USBx->GINTSTS = 0xFFFFFFFFU;
+ USB_EnableGlobalInt(USBx);
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,477 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_usb.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of USB Core HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_USB_H
+#define __STM32F4xx_LL_USB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup USB_Core
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief USB Mode definition
+ */
+typedef enum
+{
+ USB_OTG_DEVICE_MODE = 0U,
+ USB_OTG_HOST_MODE = 1U,
+ USB_OTG_DRD_MODE = 2U
+
+}USB_OTG_ModeTypeDef;
+
+/**
+ * @brief URB States definition
+ */
+typedef enum {
+ URB_IDLE = 0U,
+ URB_DONE,
+ URB_NOTREADY,
+ URB_NYET,
+ URB_ERROR,
+ URB_STALL
+
+}USB_OTG_URBStateTypeDef;
+
+/**
+ * @brief Host channel States definition
+ */
+typedef enum {
+ HC_IDLE = 0U,
+ HC_XFRC,
+ HC_HALTED,
+ HC_NAK,
+ HC_NYET,
+ HC_STALL,
+ HC_XACTERR,
+ HC_BBLERR,
+ HC_DATATGLERR
+
+}USB_OTG_HCStateTypeDef;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t Host_channels; /*!< Host Channels number.
+ This parameter Depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref USB_EP0_MPS_ */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref USB_Core_PHY_ */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
+ uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
+
+ uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
+
+ uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
+
+ uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
+
+ uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
+
+}USB_OTG_CfgTypeDef;
+
+/**
+ * @brief OTG End Point Initialization Structure definition
+ */
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint8_t data_pid_start; /*!< Initial data PID
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t even_odd_frame; /*!< IFrame parity
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint16_t tx_fifo_num; /*!< Transmission FIFO number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}USB_OTG_EPTypeDef;
+
+/**
+ * @brief OTG HC Initialization Structure definition
+ */
+typedef struct
+{
+ uint8_t dev_addr ; /*!< USB device address.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
+
+ uint8_t ch_num; /*!< Host channel number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_num; /*!< Endpoint number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t speed; /*!< USB Host speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
+
+ uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
+
+ uint8_t ep_type; /*!< Endpoint Type.
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint16_t max_packet; /*!< Endpoint Max packet size.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t data_pid; /*!< Initial data PID.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
+
+ uint32_t xfer_len; /*!< Current transfer length. */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
+
+ uint8_t toggle_in; /*!< IN transfer current toggle flag.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t toggle_out; /*!< OUT transfer current toggle flag
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
+
+ uint32_t ErrCnt; /*!< Host channel error count.*/
+
+ USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
+ This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
+ USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
+ This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
+
+}USB_OTG_HCTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup USB_Core_Mode_ USB Core Mode
+ * @{
+ */
+#define USB_OTG_MODE_DEVICE 0U
+#define USB_OTG_MODE_HOST 1U
+#define USB_OTG_MODE_DRD 2U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Speed_ USB Core Speed
+ * @{
+ */
+#define USB_OTG_SPEED_HIGH 0U
+#define USB_OTG_SPEED_HIGH_IN_FULL 1U
+#define USB_OTG_SPEED_LOW 2U
+#define USB_OTG_SPEED_FULL 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_PHY_ USB Core PHY
+ * @{
+ */
+#define USB_OTG_ULPI_PHY 1U
+#define USB_OTG_EMBEDDED_PHY 2U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_MPS_ USB Core MPS
+ * @{
+ */
+#define USB_OTG_HS_MAX_PACKET_SIZE 512U
+#define USB_OTG_FS_MAX_PACKET_SIZE 64U
+#define USB_OTG_MAX_EP0_SIZE 64U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Phy_Frequency_ USB Core Phy Frequency
+ * @{
+ */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1U)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1U)
+#define DSTS_ENUMSPD_LS_PHY_6MHZ (2U << 1U)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1U)
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Frame_Interval_ USB CORE Frame Interval
+ * @{
+ */
+#define DCFG_FRAME_INTERVAL_80 0U
+#define DCFG_FRAME_INTERVAL_85 1U
+#define DCFG_FRAME_INTERVAL_90 2U
+#define DCFG_FRAME_INTERVAL_95 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP0_MPS_ USB EP0 MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0U
+#define DEP0CTL_MPS_32 1U
+#define DEP0CTL_MPS_16 2U
+#define DEP0CTL_MPS_8 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Speed_ USB EP Speed
+ * @{
+ */
+#define EP_SPEED_LOW 0U
+#define EP_SPEED_FULL 1U
+#define EP_SPEED_HIGH 2U
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Type_ USB EP Type
+ * @{
+ */
+#define EP_TYPE_CTRL 0U
+#define EP_TYPE_ISOC 1U
+#define EP_TYPE_BULK 2U
+#define EP_TYPE_INTR 3U
+#define EP_TYPE_MSK 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_STS_Defines_ USB STS Defines
+ * @{
+ */
+#define STS_GOUT_NAK 1U
+#define STS_DATA_UPDT 2U
+#define STS_XFER_COMP 3U
+#define STS_SETUP_COMP 4U
+#define STS_SETUP_UPDT 6U
+/**
+ * @}
+ */
+
+/** @defgroup HCFG_SPEED_Defines_ HCFG SPEED Defines
+ * @{
+ */
+#define HCFG_30_60_MHZ 0U
+#define HCFG_48_MHZ 1U
+#define HCFG_6_MHZ 2U
+/**
+ * @}
+ */
+
+/** @defgroup HPRT0_PRTSPD_SPEED_Defines_ HPRT0 PRTSPD SPEED Defines
+ * @{
+ */
+#define HPRT0_PRTSPD_HIGH_SPEED 0U
+#define HPRT0_PRTSPD_FULL_SPEED 1U
+#define HPRT0_PRTSPD_LOW_SPEED 2U
+/**
+ * @}
+ */
+
+#define HCCHAR_CTRL 0U
+#define HCCHAR_ISOC 1U
+#define HCCHAR_BULK 2U
+#define HCCHAR_INTR 3U
+
+#define HC_PID_DATA0 0U
+#define HC_PID_DATA2 1U
+#define HC_PID_DATA1 2U
+#define HC_PID_SETUP 3U
+
+#define GRXSTS_PKTSTS_IN 2
+#define GRXSTS_PKTSTS_IN_XFER_COMP 3
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5
+#define GRXSTS_PKTSTS_CH_HALTED 7
+
+#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
+#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
+
+#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
+#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
+void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/arm_common_tables.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/targets/cmsis/arm_common_tables.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,136 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2014 ARM Limited. All rights reserved. +* +* $Date: 19. March 2015 +* $Revision: V.1.4.5 +* +* Project: CMSIS DSP Library +* Title: arm_common_tables.h +* +* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* -------------------------------------------------------------------- */ + +#ifndef _ARM_COMMON_TABLES_H +#define _ARM_COMMON_TABLES_H + +#include "arm_math.h" + +extern const uint16_t armBitRevTable[1024]; +extern const q15_t armRecipTableQ15[64]; +extern const q31_t armRecipTableQ31[64]; +//extern const q31_t realCoefAQ31[1024]; +//extern const q31_t realCoefBQ31[1024]; +extern const float32_t twiddleCoef_16[32]; +extern const float32_t twiddleCoef_32[64]; +extern const float32_t twiddleCoef_64[128]; +extern const float32_t twiddleCoef_128[256]; +extern const float32_t twiddleCoef_256[512]; +extern const float32_t twiddleCoef_512[1024]; +extern const float32_t twiddleCoef_1024[2048]; +extern const float32_t twiddleCoef_2048[4096]; +extern const float32_t twiddleCoef_4096[8192]; +#define twiddleCoef twiddleCoef_4096 +extern const q31_t twiddleCoef_16_q31[24]; +extern const q31_t twiddleCoef_32_q31[48]; +extern const q31_t twiddleCoef_64_q31[96]; +extern const q31_t twiddleCoef_128_q31[192]; +extern const q31_t twiddleCoef_256_q31[384]; +extern const q31_t twiddleCoef_512_q31[768]; +extern const q31_t twiddleCoef_1024_q31[1536]; +extern const q31_t twiddleCoef_2048_q31[3072]; +extern const q31_t twiddleCoef_4096_q31[6144]; +extern const q15_t twiddleCoef_16_q15[24]; +extern const q15_t twiddleCoef_32_q15[48]; +extern const q15_t twiddleCoef_64_q15[96]; +extern const q15_t twiddleCoef_128_q15[192]; +extern const q15_t twiddleCoef_256_q15[384]; +extern const q15_t twiddleCoef_512_q15[768]; +extern const q15_t twiddleCoef_1024_q15[1536]; +extern const q15_t twiddleCoef_2048_q15[3072]; +extern const q15_t twiddleCoef_4096_q15[6144]; +extern const float32_t twiddleCoef_rfft_32[32]; +extern const float32_t twiddleCoef_rfft_64[64]; +extern const float32_t twiddleCoef_rfft_128[128]; +extern const float32_t twiddleCoef_rfft_256[256]; +extern const float32_t twiddleCoef_rfft_512[512]; +extern const float32_t twiddleCoef_rfft_1024[1024]; +extern const float32_t twiddleCoef_rfft_2048[2048]; +extern const float32_t twiddleCoef_rfft_4096[4096]; + + +/* floating-point bit reversal tables */ +#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 ) +#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 ) +#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 ) +#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 ) +#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 ) +#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 ) +#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800) +#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808) +#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032) + +extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH]; + +/* fixed-point bit reversal tables */ +#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 ) +#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 ) +#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 ) +#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 ) +#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 ) +#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 ) +#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 ) +#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984) +#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032) + +extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH]; + +/* Tables for Fast Math Sine and Cosine */ +extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1]; +extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1]; +extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1]; + +#endif /* ARM_COMMON_TABLES_H */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/arm_const_structs.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/targets/cmsis/arm_const_structs.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,79 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2014 ARM Limited. All rights reserved. +* +* $Date: 19. March 2015 +* $Revision: V.1.4.5 +* +* Project: CMSIS DSP Library +* Title: arm_const_structs.h +* +* Description: This file has constant structs that are initialized for +* user convenience. For example, some can be given as +* arguments to the arm_cfft_f32() function. +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* -------------------------------------------------------------------- */ + +#ifndef _ARM_CONST_STRUCTS_H +#define _ARM_CONST_STRUCTS_H + +#include "arm_math.h" +#include "arm_common_tables.h" + + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096; + + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096; + + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096; + +#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/arm_math.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/arm_math.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,7556 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+*
+* $Date: 19. March 2015
+* $Revision: V.1.4.5
+*
+* Project: CMSIS DSP Library
+* Title: arm_math.h
+*
+* Description: Public header file for CMSIS DSP Library
+*
+* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+ \mainpage CMSIS DSP Software Library
+ *
+ * Introduction
+ * ------------
+ *
+ * This user manual describes the CMSIS DSP software library,
+ * a suite of common signal processing functions for use on Cortex-M processor based devices.
+ *
+ * The library is divided into a number of functions each covering a specific category:
+ * - Basic math functions
+ * - Fast math functions
+ * - Complex math functions
+ * - Filters
+ * - Matrix functions
+ * - Transforms
+ * - Motor control functions
+ * - Statistical functions
+ * - Support functions
+ * - Interpolation functions
+ *
+ * The library has separate functions for operating on 8-bit integers, 16-bit integers,
+ * 32-bit integer and 32-bit floating-point values.
+ *
+ * Using the Library
+ * ------------
+ *
+ * The library installer contains prebuilt versions of the libraries in the <code>Lib</code> folder.
+ * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7l_math.lib (Little endian on Cortex-M7)
+ * - arm_cortexM7b_math.lib (Big endian on Cortex-M7)
+ * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
+ * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
+ * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
+ * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
+ * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+)
+ * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+)
+ *
+ * The library functions are declared in the public file <code>arm_math.h</code> which is placed in the <code>Include</code> folder.
+ * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
+ * public header file <code> arm_math.h</code> for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
+ * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or ARM_MATH_CM3 or
+ * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
+ *
+ * Examples
+ * --------
+ *
+ * The library ships with a number of examples which demonstrate how to use the library functions.
+ *
+ * Toolchain Support
+ * ------------
+ *
+ * The library has been developed and tested with MDK-ARM version 5.14.0.0
+ * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
+ *
+ * Building the Library
+ * ------------
+ *
+ * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the <code>CMSIS\\DSP_Lib\\Source\\ARM</code> folder.
+ * - arm_cortexM_math.uvprojx
+ *
+ *
+ * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above.
+ *
+ * Pre-processor Macros
+ * ------------
+ *
+ * Each library project have differant pre-processor macros.
+ *
+ * - UNALIGNED_SUPPORT_DISABLE:
+ *
+ * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
+ *
+ * - ARM_MATH_BIG_ENDIAN:
+ *
+ * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
+ *
+ * - ARM_MATH_MATRIX_CHECK:
+ *
+ * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
+ *
+ * - ARM_MATH_ROUNDING:
+ *
+ * Define macro ARM_MATH_ROUNDING for rounding on support functions
+ *
+ * - ARM_MATH_CMx:
+ *
+ * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
+ * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and
+ * ARM_MATH_CM7 for building the library on cortex-M7.
+ *
+ * - __FPU_PRESENT:
+ *
+ * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
+ *
+ * <hr>
+ * CMSIS-DSP in ARM::CMSIS Pack
+ * -----------------------------
+ *
+ * The following files relevant to CMSIS-DSP are present in the <b>ARM::CMSIS</b> Pack directories:
+ * |File/Folder |Content |
+ * |------------------------------|------------------------------------------------------------------------|
+ * |\b CMSIS\\Documentation\\DSP | This documentation |
+ * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) |
+ * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions |
+ * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library |
+ *
+ * <hr>
+ * Revision History of CMSIS-DSP
+ * ------------
+ * Please refer to \ref ChangeLog_pg.
+ *
+ * Copyright Notice
+ * ------------
+ *
+ * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+ */
+
+
+/**
+ * @defgroup groupMath Basic Math Functions
+ */
+
+/**
+ * @defgroup groupFastMath Fast Math Functions
+ * This set of functions provides a fast approximation to sine, cosine, and square root.
+ * As compared to most of the other functions in the CMSIS math library, the fast math functions
+ * operate on individual values and not arrays.
+ * There are separate functions for Q15, Q31, and floating-point data.
+ *
+ */
+
+/**
+ * @defgroup groupCmplxMath Complex Math Functions
+ * This set of functions operates on complex data vectors.
+ * The data in the complex arrays is stored in an interleaved fashion
+ * (real, imag, real, imag, ...).
+ * In the API functions, the number of samples in a complex array refers
+ * to the number of complex values; the array contains twice this number of
+ * real values.
+ */
+
+/**
+ * @defgroup groupFilters Filtering Functions
+ */
+
+/**
+ * @defgroup groupMatrix Matrix Functions
+ *
+ * This set of functions provides basic matrix math operations.
+ * The functions operate on matrix data structures. For example,
+ * the type
+ * definition for the floating-point matrix structure is shown
+ * below:
+ * <pre>
+ * typedef struct
+ * {
+ * uint16_t numRows; // number of rows of the matrix.
+ * uint16_t numCols; // number of columns of the matrix.
+ * float32_t *pData; // points to the data of the matrix.
+ * } arm_matrix_instance_f32;
+ * </pre>
+ * There are similar definitions for Q15 and Q31 data types.
+ *
+ * The structure specifies the size of the matrix and then points to
+ * an array of data. The array is of size <code>numRows X numCols</code>
+ * and the values are arranged in row order. That is, the
+ * matrix element (i, j) is stored at:
+ * <pre>
+ * pData[i*numCols + j]
+ * </pre>
+ *
+ * \par Init Functions
+ * There is an associated initialization function for each type of matrix
+ * data structure.
+ * The initialization function sets the values of the internal structure fields.
+ * Refer to the function <code>arm_mat_init_f32()</code>, <code>arm_mat_init_q31()</code>
+ * and <code>arm_mat_init_q15()</code> for floating-point, Q31 and Q15 types, respectively.
+ *
+ * \par
+ * Use of the initialization function is optional. However, if initialization function is used
+ * then the instance structure cannot be placed into a const data section.
+ * To place the instance structure in a const data
+ * section, manually initialize the data structure. For example:
+ * <pre>
+ * <code>arm_matrix_instance_f32 S = {nRows, nColumns, pData};</code>
+ * <code>arm_matrix_instance_q31 S = {nRows, nColumns, pData};</code>
+ * <code>arm_matrix_instance_q15 S = {nRows, nColumns, pData};</code>
+ * </pre>
+ * where <code>nRows</code> specifies the number of rows, <code>nColumns</code>
+ * specifies the number of columns, and <code>pData</code> points to the
+ * data array.
+ *
+ * \par Size Checking
+ * By default all of the matrix functions perform size checking on the input and
+ * output matrices. For example, the matrix addition function verifies that the
+ * two input matrices and the output matrix all have the same number of rows and
+ * columns. If the size check fails the functions return:
+ * <pre>
+ * ARM_MATH_SIZE_MISMATCH
+ * </pre>
+ * Otherwise the functions return
+ * <pre>
+ * ARM_MATH_SUCCESS
+ * </pre>
+ * There is some overhead associated with this matrix size checking.
+ * The matrix size checking is enabled via the \#define
+ * <pre>
+ * ARM_MATH_MATRIX_CHECK
+ * </pre>
+ * within the library project settings. By default this macro is defined
+ * and size checking is enabled. By changing the project settings and
+ * undefining this macro size checking is eliminated and the functions
+ * run a bit faster. With size checking disabled the functions always
+ * return <code>ARM_MATH_SUCCESS</code>.
+ */
+
+/**
+ * @defgroup groupTransforms Transform Functions
+ */
+
+/**
+ * @defgroup groupController Controller Functions
+ */
+
+/**
+ * @defgroup groupStats Statistics Functions
+ */
+/**
+ * @defgroup groupSupport Support Functions
+ */
+
+/**
+ * @defgroup groupInterpolation Interpolation Functions
+ * These functions perform 1- and 2-dimensional interpolation of data.
+ * Linear interpolation is used for 1-dimensional data and
+ * bilinear interpolation is used for 2-dimensional data.
+ */
+
+/**
+ * @defgroup groupExamples Examples
+ */
+#ifndef _ARM_MATH_H
+#define _ARM_MATH_H
+
+#define __CMSIS_GENERIC /* disable NVIC and Systick functions */
+
+#if defined(ARM_MATH_CM7)
+ #include "core_cm7.h"
+#elif defined (ARM_MATH_CM4)
+ #include "core_cm4.h"
+#elif defined (ARM_MATH_CM3)
+ #include "core_cm3.h"
+#elif defined (ARM_MATH_CM0)
+ #include "core_cm0.h"
+#define ARM_MATH_CM0_FAMILY
+ #elif defined (ARM_MATH_CM0PLUS)
+#include "core_cm0plus.h"
+ #define ARM_MATH_CM0_FAMILY
+#else
+ #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0"
+#endif
+
+#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */
+#include "string.h"
+#include "math.h"
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+ /**
+ * @brief Macros required for reciprocal calculation in Normalized LMS
+ */
+
+#define DELTA_Q31 (0x100)
+#define DELTA_Q15 0x5
+#define INDEX_MASK 0x0000003F
+#ifndef PI
+#define PI 3.14159265358979f
+#endif
+
+ /**
+ * @brief Macros required for SINE and COSINE Fast math approximations
+ */
+
+#define FAST_MATH_TABLE_SIZE 512
+#define FAST_MATH_Q31_SHIFT (32 - 10)
+#define FAST_MATH_Q15_SHIFT (16 - 10)
+#define CONTROLLER_Q31_SHIFT (32 - 9)
+#define TABLE_SIZE 256
+#define TABLE_SPACING_Q31 0x400000
+#define TABLE_SPACING_Q15 0x80
+
+ /**
+ * @brief Macros required for SINE and COSINE Controller functions
+ */
+ /* 1.31(q31) Fixed value of 2/360 */
+ /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
+#define INPUT_SPACING 0xB60B61
+
+ /**
+ * @brief Macro for Unaligned Support
+ */
+#ifndef UNALIGNED_SUPPORT_DISABLE
+ #define ALIGN4
+#else
+ #if defined (__GNUC__)
+ #define ALIGN4 __attribute__((aligned(4)))
+ #else
+ #define ALIGN4 __align(4)
+ #endif
+#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */
+
+ /**
+ * @brief Error status returned by some functions in the library.
+ */
+
+ typedef enum
+ {
+ ARM_MATH_SUCCESS = 0, /**< No error */
+ ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
+ ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
+ ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
+ ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
+ ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
+ ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */
+ } arm_status;
+
+ /**
+ * @brief 8-bit fractional data type in 1.7 format.
+ */
+ typedef int8_t q7_t;
+
+ /**
+ * @brief 16-bit fractional data type in 1.15 format.
+ */
+ typedef int16_t q15_t;
+
+ /**
+ * @brief 32-bit fractional data type in 1.31 format.
+ */
+ typedef int32_t q31_t;
+
+ /**
+ * @brief 64-bit fractional data type in 1.63 format.
+ */
+ typedef int64_t q63_t;
+
+ /**
+ * @brief 32-bit floating-point type definition.
+ */
+ typedef float float32_t;
+
+ /**
+ * @brief 64-bit floating-point type definition.
+ */
+ typedef double float64_t;
+
+ /**
+ * @brief definition to read/write two 16 bit values.
+ */
+#if defined __CC_ARM
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED __attribute__((unused))
+#elif defined __ICCARM__
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED
+#elif defined __GNUC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+#elif defined __CSMC__ /* Cosmic */
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED
+#elif defined __TASKING__
+ #define __SIMD32_TYPE __unaligned int32_t
+ #define CMSIS_UNUSED
+#else
+ #error Unknown compiler
+#endif
+
+#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr))
+#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr))
+
+#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr))
+
+#define __SIMD64(addr) (*(int64_t **) & (addr))
+
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+ /**
+ * @brief definition to pack two 16 bit values.
+ */
+#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \
+ (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) )
+#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \
+ (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) )
+
+#endif
+
+
+ /**
+ * @brief definition to pack four 8 bit values.
+ */
+#ifndef ARM_MATH_BIG_ENDIAN
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v3) << 24) & (int32_t)0xFF000000) )
+#else
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v0) << 24) & (int32_t)0xFF000000) )
+
+#endif
+
+
+ /**
+ * @brief Clips Q63 to Q31 values.
+ */
+ static __INLINE q31_t clip_q63_to_q31(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
+ }
+
+ /**
+ * @brief Clips Q63 to Q15 values.
+ */
+ static __INLINE q15_t clip_q63_to_q15(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
+ }
+
+ /**
+ * @brief Clips Q31 to Q7 values.
+ */
+ static __INLINE q7_t clip_q31_to_q7(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
+ ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
+ }
+
+ /**
+ * @brief Clips Q31 to Q15 values.
+ */
+ static __INLINE q15_t clip_q31_to_q15(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
+ }
+
+ /**
+ * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
+ */
+
+ static __INLINE q63_t mult32x64(
+ q63_t x,
+ q31_t y)
+ {
+ return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
+ (((q63_t) (x >> 32) * y)));
+ }
+
+
+//#if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM )
+//#define __CLZ __clz
+//#endif
+
+//note: function can be removed when all toolchain support __CLZ for Cortex-M0
+#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) )
+
+ static __INLINE uint32_t __CLZ(
+ q31_t data);
+
+
+ static __INLINE uint32_t __CLZ(
+ q31_t data)
+ {
+ uint32_t count = 0;
+ uint32_t mask = 0x80000000;
+
+ while((data & mask) == 0)
+ {
+ count += 1u;
+ mask = mask >> 1u;
+ }
+
+ return (count);
+
+ }
+
+#endif
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
+ */
+
+ static __INLINE uint32_t arm_recip_q31(
+ q31_t in,
+ q31_t * dst,
+ q31_t * pRecipTable)
+ {
+
+ uint32_t out, tempVal;
+ uint32_t index, i;
+ uint32_t signBits;
+
+ if(in > 0)
+ {
+ signBits = __CLZ(in) - 1;
+ }
+ else
+ {
+ signBits = __CLZ(-in) - 1;
+ }
+
+ /* Convert input sample to 1.31 format */
+ in = in << signBits;
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t) (in >> 24u);
+ index = (index & INDEX_MASK);
+
+ /* 1.31 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (q31_t) (((q63_t) in * out) >> 31u);
+ tempVal = 0x7FFFFFFF - tempVal;
+ /* 1.31 with exp 1 */
+ //out = (q31_t) (((q63_t) out * tempVal) >> 30u);
+ out = (q31_t) clip_q63_to_q31(((q63_t) out * tempVal) >> 30u);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1u);
+
+ }
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
+ */
+ static __INLINE uint32_t arm_recip_q15(
+ q15_t in,
+ q15_t * dst,
+ q15_t * pRecipTable)
+ {
+
+ uint32_t out = 0, tempVal = 0;
+ uint32_t index = 0, i = 0;
+ uint32_t signBits = 0;
+
+ if(in > 0)
+ {
+ signBits = __CLZ(in) - 17;
+ }
+ else
+ {
+ signBits = __CLZ(-in) - 17;
+ }
+
+ /* Convert input sample to 1.15 format */
+ in = in << signBits;
+
+ /* calculation of index for initial approximated Val */
+ index = in >> 8;
+ index = (index & INDEX_MASK);
+
+ /* 1.15 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0; i < 2; i++)
+ {
+ tempVal = (q15_t) (((q31_t) in * out) >> 15);
+ tempVal = 0x7FFF - tempVal;
+ /* 1.15 with exp 1 */
+ out = (q15_t) (((q31_t) out * tempVal) >> 14);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1);
+
+ }
+
+
+ /*
+ * @brief C custom defined intrinisic function for only M0 processors
+ */
+#if defined(ARM_MATH_CM0_FAMILY)
+
+ static __INLINE q31_t __SSAT(
+ q31_t x,
+ uint32_t y)
+ {
+ int32_t posMax, negMin;
+ uint32_t i;
+
+ posMax = 1;
+ for (i = 0; i < (y - 1); i++)
+ {
+ posMax = posMax * 2;
+ }
+
+ if(x > 0)
+ {
+ posMax = (posMax - 1);
+
+ if(x > posMax)
+ {
+ x = posMax;
+ }
+ }
+ else
+ {
+ negMin = -posMax;
+
+ if(x < negMin)
+ {
+ x = negMin;
+ }
+ }
+ return (x);
+
+
+ }
+
+#endif /* end of ARM_MATH_CM0_FAMILY */
+
+
+
+ /*
+ * @brief C custom defined intrinsic function for M3 and M0 processors
+ */
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+
+ /*
+ * @brief C custom defined QADD8 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QADD8(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q7_t r, s, t, u;
+
+ r = (q7_t) x;
+ s = (q7_t) y;
+
+ r = __SSAT((q31_t) (r + s), 8);
+ s = __SSAT(((q31_t) (((x << 16) >> 24) + ((y << 16) >> 24))), 8);
+ t = __SSAT(((q31_t) (((x << 8) >> 24) + ((y << 8) >> 24))), 8);
+ u = __SSAT(((q31_t) ((x >> 24) + (y >> 24))), 8);
+
+ sum =
+ (((q31_t) u << 24) & 0xFF000000) | (((q31_t) t << 16) & 0x00FF0000) |
+ (((q31_t) s << 8) & 0x0000FF00) | (r & 0x000000FF);
+
+ return sum;
+
+ }
+
+ /*
+ * @brief C custom defined QSUB8 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSUB8(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s, t, u;
+
+ r = (q7_t) x;
+ s = (q7_t) y;
+
+ r = __SSAT((r - s), 8);
+ s = __SSAT(((q31_t) (((x << 16) >> 24) - ((y << 16) >> 24))), 8) << 8;
+ t = __SSAT(((q31_t) (((x << 8) >> 24) - ((y << 8) >> 24))), 8) << 16;
+ u = __SSAT(((q31_t) ((x >> 24) - (y >> 24))), 8) << 24;
+
+ sum =
+ (u & 0xFF000000) | (t & 0x00FF0000) | (s & 0x0000FF00) | (r &
+ 0x000000FF);
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QADD16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = __SSAT(r + s, 16);
+ s = __SSAT(((q31_t) ((x >> 16) + (y >> 16))), 16) << 16;
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+
+ }
+
+ /*
+ * @brief C custom defined SHADD16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHADD16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = ((r >> 1) + (s >> 1));
+ s = ((q31_t) ((x >> 17) + (y >> 17))) << 16;
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+
+ }
+
+ /*
+ * @brief C custom defined QSUB16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSUB16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = __SSAT(r - s, 16);
+ s = __SSAT(((q31_t) ((x >> 16) - (y >> 16))), 16) << 16;
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SHSUB16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHSUB16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t diff;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = ((r >> 1) - (s >> 1));
+ s = (((x >> 17) - (y >> 17)) << 16);
+
+ diff = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return diff;
+ }
+
+ /*
+ * @brief C custom defined QASX for M3 and M0 processors
+ */
+ static __INLINE q31_t __QASX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum = 0;
+
+ sum =
+ ((sum +
+ clip_q31_to_q15((q31_t) ((q15_t) (x >> 16) + (q15_t) y))) << 16) +
+ clip_q31_to_q15((q31_t) ((q15_t) x - (q15_t) (y >> 16)));
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SHASX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHASX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = ((r >> 1) - (y >> 17));
+ s = (((x >> 17) + (s >> 1)) << 16);
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+ }
+
+
+ /*
+ * @brief C custom defined QSAX for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSAX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum = 0;
+
+ sum =
+ ((sum +
+ clip_q31_to_q15((q31_t) ((q15_t) (x >> 16) - (q15_t) y))) << 16) +
+ clip_q31_to_q15((q31_t) ((q15_t) x + (q15_t) (y >> 16)));
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SHSAX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHSAX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (q15_t) x;
+ s = (q15_t) y;
+
+ r = ((r >> 1) + (y >> 17));
+ s = (((x >> 17) - (s >> 1)) << 16);
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SMUSDX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUSDX(
+ q31_t x,
+ q31_t y)
+ {
+
+ return ((q31_t) (((q15_t) x * (q15_t) (y >> 16)) -
+ ((q15_t) (x >> 16) * (q15_t) y)));
+ }
+
+ /*
+ * @brief C custom defined SMUADX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUADX(
+ q31_t x,
+ q31_t y)
+ {
+
+ return ((q31_t) (((q15_t) x * (q15_t) (y >> 16)) +
+ ((q15_t) (x >> 16) * (q15_t) y)));
+ }
+
+ /*
+ * @brief C custom defined QADD for M3 and M0 processors
+ */
+ static __INLINE q31_t __QADD(
+ q31_t x,
+ q31_t y)
+ {
+ return clip_q63_to_q31((q63_t) x + y);
+ }
+
+ /*
+ * @brief C custom defined QSUB for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSUB(
+ q31_t x,
+ q31_t y)
+ {
+ return clip_q63_to_q31((q63_t) x - y);
+ }
+
+ /*
+ * @brief C custom defined SMLAD for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMLAD(
+ q31_t x,
+ q31_t y,
+ q31_t sum)
+ {
+
+ return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) +
+ ((q15_t) x * (q15_t) y));
+ }
+
+ /*
+ * @brief C custom defined SMLADX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMLADX(
+ q31_t x,
+ q31_t y,
+ q31_t sum)
+ {
+
+ return (sum + ((q15_t) (x >> 16) * (q15_t) (y)) +
+ ((q15_t) x * (q15_t) (y >> 16)));
+ }
+
+ /*
+ * @brief C custom defined SMLSDX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMLSDX(
+ q31_t x,
+ q31_t y,
+ q31_t sum)
+ {
+
+ return (sum - ((q15_t) (x >> 16) * (q15_t) (y)) +
+ ((q15_t) x * (q15_t) (y >> 16)));
+ }
+
+ /*
+ * @brief C custom defined SMLALD for M3 and M0 processors
+ */
+ static __INLINE q63_t __SMLALD(
+ q31_t x,
+ q31_t y,
+ q63_t sum)
+ {
+
+ return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) +
+ ((q15_t) x * (q15_t) y));
+ }
+
+ /*
+ * @brief C custom defined SMLALDX for M3 and M0 processors
+ */
+ static __INLINE q63_t __SMLALDX(
+ q31_t x,
+ q31_t y,
+ q63_t sum)
+ {
+
+ return (sum + ((q15_t) (x >> 16) * (q15_t) y)) +
+ ((q15_t) x * (q15_t) (y >> 16));
+ }
+
+ /*
+ * @brief C custom defined SMUAD for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUAD(
+ q31_t x,
+ q31_t y)
+ {
+
+ return (((x >> 16) * (y >> 16)) +
+ (((x << 16) >> 16) * ((y << 16) >> 16)));
+ }
+
+ /*
+ * @brief C custom defined SMUSD for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUSD(
+ q31_t x,
+ q31_t y)
+ {
+
+ return (-((x >> 16) * (y >> 16)) +
+ (((x << 16) >> 16) * ((y << 16) >> 16)));
+ }
+
+
+ /*
+ * @brief C custom defined SXTB16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __SXTB16(
+ q31_t x)
+ {
+
+ return ((((x << 24) >> 24) & 0x0000FFFF) |
+ (((x << 8) >> 8) & 0xFFFF0000));
+ }
+
+
+#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
+
+
+ /**
+ * @brief Instance structure for the Q7 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q7;
+
+ /**
+ * @brief Instance structure for the Q15 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q7 FIR filter.
+ * @param[in] *S points to an instance of the Q7 FIR filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_q7(
+ const arm_fir_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 FIR filter.
+ * @param[in,out] *S points to an instance of the Q7 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed.
+ * @return none
+ */
+ void arm_fir_init_q7(
+ arm_fir_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR filter.
+ * @param[in] *S points to an instance of the Q15 FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q15 FIR filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_fast_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q15 FIR filter.
+ * @param[in,out] *S points to an instance of the Q15 FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
+ * <code>numTaps</code> is not a supported value.
+ */
+
+ arm_status arm_fir_init_q15(
+ arm_fir_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR filter.
+ * @param[in] *S points to an instance of the Q31 FIR filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q31 FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_fast_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 FIR filter.
+ * @param[in,out] *S points to an instance of the Q31 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return none.
+ */
+ void arm_fir_init_q31(
+ arm_fir_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the floating-point FIR filter.
+ * @param[in] *S points to an instance of the floating-point FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_f32(
+ const arm_fir_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point FIR filter.
+ * @param[in,out] *S points to an instance of the floating-point FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return none.
+ */
+ void arm_fir_init_f32(
+ arm_fir_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+
+ } arm_biquad_casd_df1_inst_q15;
+
+
+ /**
+ * @brief Instance structure for the Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+
+ } arm_biquad_casd_df1_inst_q31;
+
+ /**
+ * @brief Instance structure for the floating-point Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+
+
+ } arm_biquad_casd_df1_inst_f32;
+
+
+
+ /**
+ * @brief Processing function for the Q15 Biquad cascade filter.
+ * @param[in] *S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q15 Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ * @return none
+ */
+
+ void arm_biquad_cascade_df1_init_q15(
+ arm_biquad_casd_df1_inst_q15 * S,
+ uint8_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_fast_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 Biquad cascade filter
+ * @param[in] *S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_fast_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ * @return none
+ */
+
+ void arm_biquad_cascade_df1_init_q31(
+ arm_biquad_casd_df1_inst_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int8_t postShift);
+
+ /**
+ * @brief Processing function for the floating-point Biquad cascade filter.
+ * @param[in] *S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_f32(
+ const arm_biquad_casd_df1_inst_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_df1_init_f32(
+ arm_biquad_casd_df1_inst_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float32_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f32;
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float64_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f64;
+
+ /**
+ * @brief Instance structure for the Q15 matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q15_t *pData; /**< points to the data of the matrix. */
+
+ } arm_matrix_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q31_t *pData; /**< points to the data of the matrix. */
+
+ } arm_matrix_instance_q31;
+
+
+
+ /**
+ * @brief Floating-point matrix addition.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_add_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix addition.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_add_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix addition.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_add_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+ /**
+ * @brief Floating-point, complex, matrix multiplication.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_cmplx_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15, complex, matrix multiplication.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_cmplx_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pScratch);
+
+ /**
+ * @brief Q31, complex, matrix multiplication.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_cmplx_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix transpose.
+ * @param[in] *pSrc points to the input matrix
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
+ * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_trans_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix transpose.
+ * @param[in] *pSrc points to the input matrix
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
+ * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_trans_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix transpose.
+ * @param[in] *pSrc points to the input matrix
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
+ * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_trans_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix multiplication
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix multiplication
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @param[in] *pState points to the array for storing intermediate results
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+ /**
+ * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @param[in] *pState points to the array for storing intermediate results
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_fast_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+ /**
+ * @brief Q31 matrix multiplication
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+ /**
+ * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_fast_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix subtraction
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_sub_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix subtraction
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_sub_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix subtraction
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_sub_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+ /**
+ * @brief Floating-point matrix scaling.
+ * @param[in] *pSrc points to the input matrix
+ * @param[in] scale scale factor
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_scale_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ float32_t scale,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix scaling.
+ * @param[in] *pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to output matrix
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_scale_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ q15_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix scaling.
+ * @param[in] *pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_scale_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ q31_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix initialization.
+ * @param[in,out] *S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] *pData points to the matrix data array.
+ * @return none
+ */
+
+ void arm_mat_init_q31(
+ arm_matrix_instance_q31 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q31_t * pData);
+
+ /**
+ * @brief Q15 matrix initialization.
+ * @param[in,out] *S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] *pData points to the matrix data array.
+ * @return none
+ */
+
+ void arm_mat_init_q15(
+ arm_matrix_instance_q15 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q15_t * pData);
+
+ /**
+ * @brief Floating-point matrix initialization.
+ * @param[in,out] *S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] *pData points to the matrix data array.
+ * @return none
+ */
+
+ void arm_mat_init_f32(
+ arm_matrix_instance_f32 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ float32_t * pData);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 PID Control.
+ */
+ typedef struct
+ {
+ q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+#ifdef ARM_MATH_CM0_FAMILY
+ q15_t A1;
+ q15_t A2;
+#else
+ q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
+#endif
+ q15_t state[3]; /**< The state array of length 3. */
+ q15_t Kp; /**< The proportional gain. */
+ q15_t Ki; /**< The integral gain. */
+ q15_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 PID Control.
+ */
+ typedef struct
+ {
+ q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ q31_t A2; /**< The derived gain, A2 = Kd . */
+ q31_t state[3]; /**< The state array of length 3. */
+ q31_t Kp; /**< The proportional gain. */
+ q31_t Ki; /**< The integral gain. */
+ q31_t Kd; /**< The derivative gain. */
+
+ } arm_pid_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point PID Control.
+ */
+ typedef struct
+ {
+ float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ float32_t A2; /**< The derived gain, A2 = Kd . */
+ float32_t state[3]; /**< The state array of length 3. */
+ float32_t Kp; /**< The proportional gain. */
+ float32_t Ki; /**< The integral gain. */
+ float32_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_f32;
+
+
+
+ /**
+ * @brief Initialization function for the floating-point PID Control.
+ * @param[in,out] *S points to an instance of the PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ */
+ void arm_pid_init_f32(
+ arm_pid_instance_f32 * S,
+ int32_t resetStateFlag);
+
+ /**
+ * @brief Reset function for the floating-point PID Control.
+ * @param[in,out] *S is an instance of the floating-point PID Control structure
+ * @return none
+ */
+ void arm_pid_reset_f32(
+ arm_pid_instance_f32 * S);
+
+
+ /**
+ * @brief Initialization function for the Q31 PID Control.
+ * @param[in,out] *S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ */
+ void arm_pid_init_q31(
+ arm_pid_instance_q31 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q31 PID Control.
+ * @param[in,out] *S points to an instance of the Q31 PID Control structure
+ * @return none
+ */
+
+ void arm_pid_reset_q31(
+ arm_pid_instance_q31 * S);
+
+ /**
+ * @brief Initialization function for the Q15 PID Control.
+ * @param[in,out] *S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ */
+ void arm_pid_init_q15(
+ arm_pid_instance_q15 * S,
+ int32_t resetStateFlag);
+
+ /**
+ * @brief Reset function for the Q15 PID Control.
+ * @param[in,out] *S points to an instance of the q15 PID Control structure
+ * @return none
+ */
+ void arm_pid_reset_q15(
+ arm_pid_instance_q15 * S);
+
+
+ /**
+ * @brief Instance structure for the floating-point Linear Interpolate function.
+ */
+ typedef struct
+ {
+ uint32_t nValues; /**< nValues */
+ float32_t x1; /**< x1 */
+ float32_t xSpacing; /**< xSpacing */
+ float32_t *pYData; /**< pointer to the table of Y values */
+ } arm_linear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ float32_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q31_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q15_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q7_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q7;
+
+
+ /**
+ * @brief Q7 vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Floating-point vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+
+
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q15(
+ arm_cfft_radix2_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q15(
+ const arm_cfft_radix2_instance_q15 * S,
+ q15_t * pSrc);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q15(
+ arm_cfft_radix4_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_q15(
+ const arm_cfft_radix4_instance_q15 * S,
+ q15_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q31;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q31(
+ arm_cfft_radix2_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q31(
+ const arm_cfft_radix2_instance_q31 * S,
+ q31_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Q31 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q31;
+
+/* Deprecated */
+ void arm_cfft_radix4_q31(
+ const arm_cfft_radix4_instance_q31 * S,
+ q31_t * pSrc);
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q31(
+ arm_cfft_radix4_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix2_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_f32(
+ arm_cfft_radix2_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_f32(
+ const arm_cfft_radix2_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix4_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_f32(
+ arm_cfft_radix4_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_f32(
+ const arm_cfft_radix4_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q15_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q15;
+
+void arm_cfft_q15(
+ const arm_cfft_instance_q15 * S,
+ q15_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q31;
+
+void arm_cfft_q31(
+ const arm_cfft_instance_q31 * S,
+ q31_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_f32;
+
+ void arm_cfft_f32(
+ const arm_cfft_instance_f32 * S,
+ float32_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the Q15 RFFT/RIFFT function.
+ */
+
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q15;
+
+ arm_status arm_rfft_init_q15(
+ arm_rfft_instance_q15 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q15(
+ const arm_rfft_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst);
+
+ /**
+ * @brief Instance structure for the Q31 RFFT/RIFFT function.
+ */
+
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q31;
+
+ arm_status arm_rfft_init_q31(
+ arm_rfft_instance_q31 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q31(
+ const arm_rfft_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint16_t fftLenBy2; /**< length of the complex FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_f32;
+
+ arm_status arm_rfft_init_f32(
+ arm_rfft_instance_f32 * S,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_f32(
+ const arm_rfft_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+
+typedef struct
+ {
+ arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */
+ uint16_t fftLenRFFT; /**< length of the real sequence */
+ float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */
+ } arm_rfft_fast_instance_f32 ;
+
+arm_status arm_rfft_fast_init_f32 (
+ arm_rfft_fast_instance_f32 * S,
+ uint16_t fftLen);
+
+void arm_rfft_fast_f32(
+ arm_rfft_fast_instance_f32 * S,
+ float32_t * p, float32_t * pOut,
+ uint8_t ifftFlag);
+
+ /**
+ * @brief Instance structure for the floating-point DCT4/IDCT4 function.
+ */
+
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ float32_t normalize; /**< normalizing factor. */
+ float32_t *pTwiddle; /**< points to the twiddle factor table. */
+ float32_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_f32;
+
+ /**
+ * @brief Initialization function for the floating-point DCT4/IDCT4.
+ * @param[in,out] *S points to an instance of floating-point DCT4/IDCT4 structure.
+ * @param[in] *S_RFFT points to an instance of floating-point RFFT/RIFFT structure.
+ * @param[in] *S_CFFT points to an instance of floating-point CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported transform length.
+ */
+
+ arm_status arm_dct4_init_f32(
+ arm_dct4_instance_f32 * S,
+ arm_rfft_instance_f32 * S_RFFT,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ float32_t normalize);
+
+ /**
+ * @brief Processing function for the floating-point DCT4/IDCT4.
+ * @param[in] *S points to an instance of the floating-point DCT4/IDCT4 structure.
+ * @param[in] *pState points to state buffer.
+ * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
+ * @return none.
+ */
+
+ void arm_dct4_f32(
+ const arm_dct4_instance_f32 * S,
+ float32_t * pState,
+ float32_t * pInlineBuffer);
+
+ /**
+ * @brief Instance structure for the Q31 DCT4/IDCT4 function.
+ */
+
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q31_t normalize; /**< normalizing factor. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ q31_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q31;
+
+ /**
+ * @brief Initialization function for the Q31 DCT4/IDCT4.
+ * @param[in,out] *S points to an instance of Q31 DCT4/IDCT4 structure.
+ * @param[in] *S_RFFT points to an instance of Q31 RFFT/RIFFT structure
+ * @param[in] *S_CFFT points to an instance of Q31 CFFT/CIFFT structure
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
+ */
+
+ arm_status arm_dct4_init_q31(
+ arm_dct4_instance_q31 * S,
+ arm_rfft_instance_q31 * S_RFFT,
+ arm_cfft_radix4_instance_q31 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q31_t normalize);
+
+ /**
+ * @brief Processing function for the Q31 DCT4/IDCT4.
+ * @param[in] *S points to an instance of the Q31 DCT4 structure.
+ * @param[in] *pState points to state buffer.
+ * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
+ * @return none.
+ */
+
+ void arm_dct4_q31(
+ const arm_dct4_instance_q31 * S,
+ q31_t * pState,
+ q31_t * pInlineBuffer);
+
+ /**
+ * @brief Instance structure for the Q15 DCT4/IDCT4 function.
+ */
+
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q15_t normalize; /**< normalizing factor. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ q15_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q15;
+
+ /**
+ * @brief Initialization function for the Q15 DCT4/IDCT4.
+ * @param[in,out] *S points to an instance of Q15 DCT4/IDCT4 structure.
+ * @param[in] *S_RFFT points to an instance of Q15 RFFT/RIFFT structure.
+ * @param[in] *S_CFFT points to an instance of Q15 CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
+ */
+
+ arm_status arm_dct4_init_q15(
+ arm_dct4_instance_q15 * S,
+ arm_rfft_instance_q15 * S_RFFT,
+ arm_cfft_radix4_instance_q15 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q15_t normalize);
+
+ /**
+ * @brief Processing function for the Q15 DCT4/IDCT4.
+ * @param[in] *S points to an instance of the Q15 DCT4 structure.
+ * @param[in] *pState points to state buffer.
+ * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
+ * @return none.
+ */
+
+ void arm_dct4_q15(
+ const arm_dct4_instance_q15 * S,
+ q15_t * pState,
+ q15_t * pInlineBuffer);
+
+ /**
+ * @brief Floating-point vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q7 vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Floating-point vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q7 vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a floating-point vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scale scale factor to be applied
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_f32(
+ float32_t * pSrc,
+ float32_t scale,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a Q7 vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_q7(
+ q7_t * pSrc,
+ q7_t scaleFract,
+ int8_t shift,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a Q15 vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_q15(
+ q15_t * pSrc,
+ q15_t scaleFract,
+ int8_t shift,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a Q31 vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_q31(
+ q31_t * pSrc,
+ q31_t scaleFract,
+ int8_t shift,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q7 vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Floating-point vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Dot product of floating-point vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t blockSize,
+ float32_t * result);
+
+ /**
+ * @brief Dot product of Q7 vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ uint32_t blockSize,
+ q31_t * result);
+
+ /**
+ * @brief Dot product of Q15 vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+ /**
+ * @brief Dot product of Q31 vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+ /**
+ * @brief Shifts the elements of a Q7 vector a specified number of bits.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_shift_q7(
+ q7_t * pSrc,
+ int8_t shiftBits,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Shifts the elements of a Q15 vector a specified number of bits.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_shift_q15(
+ q15_t * pSrc,
+ int8_t shiftBits,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Shifts the elements of a Q31 vector a specified number of bits.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_shift_q31(
+ q31_t * pSrc,
+ int8_t shiftBits,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a floating-point vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_f32(
+ float32_t * pSrc,
+ float32_t offset,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a Q7 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_q7(
+ q7_t * pSrc,
+ q7_t offset,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a Q15 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_q15(
+ q15_t * pSrc,
+ q15_t offset,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a Q31 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_q31(
+ q31_t * pSrc,
+ q31_t offset,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a floating-point vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a Q7 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a Q15 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a Q31 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+ /**
+ * @brief Copies the elements of a floating-point vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Copies the elements of a Q7 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Copies the elements of a Q15 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Copies the elements of a Q31 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+ /**
+ * @brief Fills a constant value into a floating-point vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_f32(
+ float32_t value,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fills a constant value into a Q7 vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_q7(
+ q7_t value,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fills a constant value into a Q15 vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_q15(
+ q15_t value,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fills a constant value into a Q31 vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_q31(
+ q31_t value,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+/**
+ * @brief Convolution of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return none.
+ */
+
+
+ void arm_conv_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return none.
+ */
+
+ void arm_conv_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+
+ /**
+ * @brief Convolution of Q31 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+ /**
+ * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return none.
+ */
+
+ void arm_conv_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Partial convolution of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] * pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] * pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q7 sequences
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Partial convolution of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR decimator.
+ */
+
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR decimator.
+ */
+
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+
+ } arm_fir_decimate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR decimator.
+ */
+
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+
+ } arm_fir_decimate_instance_f32;
+
+
+
+ /**
+ * @brief Processing function for the floating-point FIR decimator.
+ * @param[in] *S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_f32(
+ const arm_fir_decimate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR decimator.
+ * @param[in,out] *S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * <code>blockSize</code> is not a multiple of <code>M</code>.
+ */
+
+ arm_status arm_fir_decimate_init_f32(
+ arm_fir_decimate_instance_f32 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator.
+ * @param[in] *S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_fast_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR decimator.
+ * @param[in,out] *S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * <code>blockSize</code> is not a multiple of <code>M</code>.
+ */
+
+ arm_status arm_fir_decimate_init_q15(
+ arm_fir_decimate_instance_q15 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator.
+ * @param[in] *S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_q31(
+ const arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_fast_q31(
+ arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR decimator.
+ * @param[in,out] *S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * <code>blockSize</code> is not a multiple of <code>M</code>.
+ */
+
+ arm_status arm_fir_decimate_init_q31(
+ arm_fir_decimate_instance_q31 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR interpolator.
+ */
+
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR interpolator.
+ */
+
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR interpolator.
+ */
+
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
+ } arm_fir_interpolate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 FIR interpolator.
+ * @param[in] *S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_interpolate_q15(
+ const arm_fir_interpolate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR interpolator.
+ * @param[in,out] *S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+ */
+
+ arm_status arm_fir_interpolate_init_q15(
+ arm_fir_interpolate_instance_q15 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR interpolator.
+ * @param[in] *S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_interpolate_q31(
+ const arm_fir_interpolate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 FIR interpolator.
+ * @param[in,out] *S points to an instance of the Q31 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+ */
+
+ arm_status arm_fir_interpolate_init_q31(
+ arm_fir_interpolate_instance_q31 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR interpolator.
+ * @param[in] *S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_interpolate_f32(
+ const arm_fir_interpolate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point FIR interpolator.
+ * @param[in,out] *S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+ */
+
+ arm_status arm_fir_interpolate_init_f32(
+ arm_fir_interpolate_instance_f32 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the high precision Q31 Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
+
+ } arm_biquad_cas_df1_32x64_ins_q31;
+
+
+ /**
+ * @param[in] *S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cas_df1_32x64_q31(
+ const arm_biquad_cas_df1_32x64_ins_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @param[in,out] *S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format
+ * @return none
+ */
+
+ void arm_biquad_cas_df1_32x64_init_q31(
+ arm_biquad_cas_df1_32x64_ins_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q63_t * pState,
+ uint8_t postShift);
+
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f32;
+
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_stereo_df2T_instance_f32;
+
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f64;
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] *S points to an instance of the filter data structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df2T_f32(
+ const arm_biquad_cascade_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels
+ * @param[in] *S points to an instance of the filter data structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_stereo_df2T_f32(
+ const arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] *S points to an instance of the filter data structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df2T_f64(
+ const arm_biquad_cascade_df2T_instance_f64 * S,
+ float64_t * pSrc,
+ float64_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_df2T_init_f32(
+ arm_biquad_cascade_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_stereo_df2T_init_f32(
+ arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_df2T_init_f64(
+ arm_biquad_cascade_df2T_instance_f64 * S,
+ uint8_t numStages,
+ float64_t * pCoeffs,
+ float64_t * pState);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR lattice filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR lattice filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR lattice filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_f32;
+
+ /**
+ * @brief Initialization function for the Q15 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] *pState points to the state buffer. The array is of length numStages.
+ * @return none.
+ */
+
+ void arm_fir_lattice_init_q15(
+ arm_fir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_lattice_q15(
+ const arm_fir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] *pState points to the state buffer. The array is of length numStages.
+ * @return none.
+ */
+
+ void arm_fir_lattice_init_q31(
+ arm_fir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_fir_lattice_q31(
+ const arm_fir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+/**
+ * @brief Initialization function for the floating-point FIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] *pState points to the state buffer. The array is of length numStages.
+ * @return none.
+ */
+
+ void arm_fir_lattice_init_f32(
+ arm_fir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+ /**
+ * @brief Processing function for the floating-point FIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_fir_lattice_f32(
+ const arm_fir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the Q15 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_f32;
+
+ /**
+ * @brief Processing function for the floating-point IIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_f32(
+ const arm_iir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point IIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize-1.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_init_f32(
+ arm_iir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pkCoeffs,
+ float32_t * pvCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 IIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_q31(
+ const arm_iir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 IIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_init_q31(
+ arm_iir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pkCoeffs,
+ q31_t * pvCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 IIR lattice filter.
+ * @param[in] *S points to an instance of the Q15 IIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_q15(
+ const arm_iir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the Q15 IIR lattice filter.
+ * @param[in] *S points to an instance of the fixed-point Q15 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] *pkCoeffs points to reflection coefficient buffer. The array is of length numStages.
+ * @param[in] *pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] *pState points to state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process per call.
+ * @return none.
+ */
+
+ void arm_iir_lattice_init_q15(
+ arm_iir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pkCoeffs,
+ q15_t * pvCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the floating-point LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that controls filter coefficient updates. */
+ } arm_lms_instance_f32;
+
+ /**
+ * @brief Processing function for floating-point LMS filter.
+ * @param[in] *S points to an instance of the floating-point LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_f32(
+ const arm_lms_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for floating-point LMS filter.
+ * @param[in] *S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to the coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_init_f32(
+ arm_lms_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the Q15 LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 LMS filter.
+ * @param[in] *S points to an instance of the Q15 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to the coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_init_q15(
+ arm_lms_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+ /**
+ * @brief Processing function for Q15 LMS filter.
+ * @param[in] *S points to an instance of the Q15 LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_q15(
+ const arm_lms_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+
+ } arm_lms_instance_q31;
+
+ /**
+ * @brief Processing function for Q31 LMS filter.
+ * @param[in] *S points to an instance of the Q15 LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_q31(
+ const arm_lms_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for Q31 LMS filter.
+ * @param[in] *S points to an instance of the Q31 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_init_q31(
+ arm_lms_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+ /**
+ * @brief Instance structure for the floating-point normalized LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that control filter coefficient updates. */
+ float32_t energy; /**< saves previous frame energy. */
+ float32_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_f32;
+
+ /**
+ * @brief Processing function for floating-point normalized LMS filter.
+ * @param[in] *S points to an instance of the floating-point normalized LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_f32(
+ arm_lms_norm_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for floating-point normalized LMS filter.
+ * @param[in] *S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_init_f32(
+ arm_lms_norm_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q31_t *recipTable; /**< points to the reciprocal initial value table. */
+ q31_t energy; /**< saves previous frame energy. */
+ q31_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q31;
+
+ /**
+ * @brief Processing function for Q31 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_q31(
+ arm_lms_norm_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for Q31 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_norm_init_q31(
+ arm_lms_norm_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+ /**
+ * @brief Instance structure for the Q15 normalized LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< Number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q15_t *recipTable; /**< Points to the reciprocal initial value table. */
+ q15_t energy; /**< saves previous frame energy. */
+ q15_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q15;
+
+ /**
+ * @brief Processing function for Q15 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_q15(
+ arm_lms_norm_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q15 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_norm_init_q15(
+ arm_lms_norm_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+ /**
+ * @brief Correlation of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @return none.
+ */
+ void arm_correlate_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @return none.
+ */
+
+ void arm_correlate_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+ /**
+ * @brief Correlation of Q31 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+ /**
+ * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return none.
+ */
+
+ void arm_correlate_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Instance structure for the floating-point sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 sparse FIR filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 sparse FIR filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q7 sparse FIR filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q7;
+
+ /**
+ * @brief Processing function for the floating-point sparse FIR filter.
+ * @param[in] *S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_f32(
+ arm_fir_sparse_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ float32_t * pScratchIn,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point sparse FIR filter.
+ * @param[in,out] *S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_f32(
+ arm_fir_sparse_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 sparse FIR filter.
+ * @param[in] *S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_q31(
+ arm_fir_sparse_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ q31_t * pScratchIn,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 sparse FIR filter.
+ * @param[in,out] *S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_q31(
+ arm_fir_sparse_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q15 sparse FIR filter.
+ * @param[in] *S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] *pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_q15(
+ arm_fir_sparse_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ q15_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 sparse FIR filter.
+ * @param[in,out] *S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_q15(
+ arm_fir_sparse_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q7 sparse FIR filter.
+ * @param[in] *S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] *pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_q7(
+ arm_fir_sparse_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ q7_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q7 sparse FIR filter.
+ * @param[in,out] *S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_q7(
+ arm_fir_sparse_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /*
+ * @brief Floating-point sin_cos function.
+ * @param[in] theta input value in degrees
+ * @param[out] *pSinVal points to the processed sine output.
+ * @param[out] *pCosVal points to the processed cos output.
+ * @return none.
+ */
+
+ void arm_sin_cos_f32(
+ float32_t theta,
+ float32_t * pSinVal,
+ float32_t * pCcosVal);
+
+ /*
+ * @brief Q31 sin_cos function.
+ * @param[in] theta scaled input value in degrees
+ * @param[out] *pSinVal points to the processed sine output.
+ * @param[out] *pCosVal points to the processed cosine output.
+ * @return none.
+ */
+
+ void arm_sin_cos_q31(
+ q31_t theta,
+ q31_t * pSinVal,
+ q31_t * pCosVal);
+
+
+ /**
+ * @brief Floating-point complex conjugate.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_conj_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex conjugate.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_conj_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex conjugate.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_conj_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+
+ /**
+ * @brief Floating-point complex magnitude squared
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_squared_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex magnitude squared
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_squared_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex magnitude squared
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_squared_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup PID PID Motor Control
+ *
+ * A Proportional Integral Derivative (PID) controller is a generic feedback control
+ * loop mechanism widely used in industrial control systems.
+ * A PID controller is the most commonly used type of feedback controller.
+ *
+ * This set of functions implements (PID) controllers
+ * for Q15, Q31, and floating-point data types. The functions operate on a single sample
+ * of data and each call to the function returns a single processed value.
+ * <code>S</code> points to an instance of the PID control data structure. <code>in</code>
+ * is the input sample value. The functions return the output value.
+ *
+ * \par Algorithm:
+ * <pre>
+ * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+ * A0 = Kp + Ki + Kd
+ * A1 = (-Kp ) - (2 * Kd )
+ * A2 = Kd </pre>
+ *
+ * \par
+ * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
+ *
+ * \par
+ * \image html PID.gif "Proportional Integral Derivative Controller"
+ *
+ * \par
+ * The PID controller calculates an "error" value as the difference between
+ * the measured output and the reference input.
+ * The controller attempts to minimize the error by adjusting the process control inputs.
+ * The proportional value determines the reaction to the current error,
+ * the integral value determines the reaction based on the sum of recent errors,
+ * and the derivative value determines the reaction based on the rate at which the error has been changing.
+ *
+ * \par Instance Structure
+ * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
+ * A separate instance structure must be defined for each PID Controller.
+ * There are separate instance structure declarations for each of the 3 supported data types.
+ *
+ * \par Reset Functions
+ * There is also an associated reset function for each data type which clears the state array.
+ *
+ * \par Initialization Functions
+ * There is also an associated initialization function for each data type.
+ * The initialization function performs the following operations:
+ * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
+ * - Zeros out the values in the state buffer.
+ *
+ * \par
+ * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
+ *
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the fixed-point versions of the PID Controller functions.
+ * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup PID
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point PID Control.
+ * @param[in,out] *S is an instance of the floating-point PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ */
+
+
+ static __INLINE float32_t arm_pid_f32(
+ arm_pid_instance_f32 * S,
+ float32_t in)
+ {
+ float32_t out;
+
+ /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */
+ out = (S->A0 * in) +
+ (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q31 PID Control.
+ * @param[in,out] *S points to an instance of the Q31 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 64-bit accumulator.
+ * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
+ * Thus, if the accumulator result overflows it wraps around rather than clip.
+ * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
+ * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
+ */
+
+ static __INLINE q31_t arm_pid_q31(
+ arm_pid_instance_q31 * S,
+ q31_t in)
+ {
+ q63_t acc;
+ q31_t out;
+
+ /* acc = A0 * x[n] */
+ acc = (q63_t) S->A0 * in;
+
+ /* acc += A1 * x[n-1] */
+ acc += (q63_t) S->A1 * S->state[0];
+
+ /* acc += A2 * x[n-2] */
+ acc += (q63_t) S->A2 * S->state[1];
+
+ /* convert output to 1.31 format to add y[n-1] */
+ out = (q31_t) (acc >> 31u);
+
+ /* out += y[n-1] */
+ out += S->state[2];
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q15 PID Control.
+ * @param[in,out] *S points to an instance of the Q15 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using a 64-bit internal accumulator.
+ * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
+ * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
+ * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
+ * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
+ * Lastly, the accumulator is saturated to yield a result in 1.15 format.
+ */
+
+ static __INLINE q15_t arm_pid_q15(
+ arm_pid_instance_q15 * S,
+ q15_t in)
+ {
+ q63_t acc;
+ q15_t out;
+
+#ifndef ARM_MATH_CM0_FAMILY
+ __SIMD32_TYPE *vstate;
+
+ /* Implementation of PID controller */
+
+ /* acc = A0 * x[n] */
+ acc = (q31_t) __SMUAD(S->A0, in);
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ vstate = __SIMD32_CONST(S->state);
+ acc = __SMLALD(S->A1, (q31_t) *vstate, acc);
+
+#else
+ /* acc = A0 * x[n] */
+ acc = ((q31_t) S->A0) * in;
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ acc += (q31_t) S->A1 * S->state[0];
+ acc += (q31_t) S->A2 * S->state[1];
+
+#endif
+
+ /* acc += y[n-1] */
+ acc += (q31_t) S->state[2] << 15;
+
+ /* saturate the output */
+ out = (q15_t) (__SSAT((acc >> 15), 16));
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @} end of PID group
+ */
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] *src points to the instance of the input floating-point matrix structure.
+ * @param[out] *dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+
+ arm_status arm_mat_inverse_f32(
+ const arm_matrix_instance_f32 * src,
+ arm_matrix_instance_f32 * dst);
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] *src points to the instance of the input floating-point matrix structure.
+ * @param[out] *dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+
+ arm_status arm_mat_inverse_f64(
+ const arm_matrix_instance_f64 * src,
+ arm_matrix_instance_f64 * dst);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+
+ /**
+ * @defgroup clarke Vector Clarke Transform
+ * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
+ * Generally the Clarke transform uses three-phase currents <code>Ia, Ib and Ic</code> to calculate currents
+ * in the two-phase orthogonal stator axis <code>Ialpha</code> and <code>Ibeta</code>.
+ * When <code>Ialpha</code> is superposed with <code>Ia</code> as shown in the figure below
+ * \image html clarke.gif Stator current space vector and its components in (a,b).
+ * and <code>Ia + Ib + Ic = 0</code>, in this condition <code>Ialpha</code> and <code>Ibeta</code>
+ * can be calculated using only <code>Ia</code> and <code>Ib</code>.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeFormula.gif
+ * where <code>Ia</code> and <code>Ib</code> are the instantaneous stator phases and
+ * <code>pIalpha</code> and <code>pIbeta</code> are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup clarke
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point Clarke transform
+ * @param[in] Ia input three-phase coordinate <code>a</code>
+ * @param[in] Ib input three-phase coordinate <code>b</code>
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @return none.
+ */
+
+ static __INLINE void arm_clarke_f32(
+ float32_t Ia,
+ float32_t Ib,
+ float32_t * pIalpha,
+ float32_t * pIbeta)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
+ *pIbeta =
+ ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
+
+ }
+
+ /**
+ * @brief Clarke transform for Q31 version
+ * @param[in] Ia input three-phase coordinate <code>a</code>
+ * @param[in] Ib input three-phase coordinate <code>b</code>
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+
+ static __INLINE void arm_clarke_q31(
+ q31_t Ia,
+ q31_t Ib,
+ q31_t * pIalpha,
+ q31_t * pIbeta)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIalpha from Ia by equation pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
+
+ /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
+ product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
+
+ /* pIbeta is calculated by adding the intermediate products */
+ *pIbeta = __QADD(product1, product2);
+ }
+
+ /**
+ * @} end of clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q31 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_q7_to_q31(
+ q7_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_clarke Vector Inverse Clarke Transform
+ * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeInvFormula.gif
+ * where <code>pIa</code> and <code>pIb</code> are the instantaneous stator phases and
+ * <code>Ialpha</code> and <code>Ibeta</code> are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_clarke
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Clarke transform
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] *pIa points to output three-phase coordinate <code>a</code>
+ * @param[out] *pIb points to output three-phase coordinate <code>b</code>
+ * @return none.
+ */
+
+
+ static __INLINE void arm_inv_clarke_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pIa,
+ float32_t * pIb)
+ {
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
+ *pIb = -0.5 * Ialpha + (float32_t) 0.8660254039 *Ibeta;
+
+ }
+
+ /**
+ * @brief Inverse Clarke transform for Q31 version
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] *pIa points to output three-phase coordinate <code>a</code>
+ * @param[out] *pIb points to output three-phase coordinate <code>b</code>
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the subtraction, hence there is no risk of overflow.
+ */
+
+ static __INLINE void arm_inv_clarke_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pIa,
+ q31_t * pIb)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
+
+ /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
+
+ /* pIb is calculated by subtracting the products */
+ *pIb = __QSUB(product2, product1);
+
+ }
+
+ /**
+ * @} end of inv_clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q15 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_q7_to_q15(
+ q7_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup park Vector Park Transform
+ *
+ * Forward Park transform converts the input two-coordinate vector to flux and torque components.
+ * The Park transform can be used to realize the transformation of the <code>Ialpha</code> and the <code>Ibeta</code> currents
+ * from the stationary to the moving reference frame and control the spatial relationship between
+ * the stator vector current and rotor flux vector.
+ * If we consider the d axis aligned with the rotor flux, the diagram below shows the
+ * current vector and the relationship from the two reference frames:
+ * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkFormula.gif
+ * where <code>Ialpha</code> and <code>Ibeta</code> are the stator vector components,
+ * <code>pId</code> and <code>pIq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Park transform
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] *pId points to output rotor reference frame d
+ * @param[out] *pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ *
+ * The function implements the forward Park transform.
+ *
+ */
+
+ static __INLINE void arm_park_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pId,
+ float32_t * pIq,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
+ *pId = Ialpha * cosVal + Ibeta * sinVal;
+
+ /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
+ *pIq = -Ialpha * sinVal + Ibeta * cosVal;
+
+ }
+
+ /**
+ * @brief Park transform for Q31 version
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] *pId points to output rotor reference frame d
+ * @param[out] *pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition and subtraction, hence there is no risk of overflow.
+ */
+
+
+ static __INLINE void arm_park_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pId,
+ q31_t * pIq,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Ialpha * cosVal) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * sinVal) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Ialpha * sinVal) */
+ product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * cosVal) */
+ product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
+
+ /* Calculate pId by adding the two intermediate products 1 and 2 */
+ *pId = __QADD(product1, product2);
+
+ /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
+ *pIq = __QSUB(product4, product3);
+ }
+
+ /**
+ * @} end of park group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q7_to_float(
+ q7_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_park Vector Inverse Park transform
+ * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkInvFormula.gif
+ * where <code>pIalpha</code> and <code>pIbeta</code> are the stator vector components,
+ * <code>Id</code> and <code>Iq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Park transform
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ */
+
+ static __INLINE void arm_inv_park_f32(
+ float32_t Id,
+ float32_t Iq,
+ float32_t * pIalpha,
+ float32_t * pIbeta,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
+ *pIalpha = Id * cosVal - Iq * sinVal;
+
+ /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
+ *pIbeta = Id * sinVal + Iq * cosVal;
+
+ }
+
+
+ /**
+ * @brief Inverse Park transform for Q31 version
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+
+
+ static __INLINE void arm_inv_park_q31(
+ q31_t Id,
+ q31_t Iq,
+ q31_t * pIalpha,
+ q31_t * pIbeta,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Id * cosVal) */
+ product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * sinVal) */
+ product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Id * sinVal) */
+ product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * cosVal) */
+ product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
+
+ /* Calculate pIalpha by using the two intermediate products 1 and 2 */
+ *pIalpha = __QSUB(product1, product2);
+
+ /* Calculate pIbeta by using the two intermediate products 3 and 4 */
+ *pIbeta = __QADD(product4, product3);
+
+ }
+
+ /**
+ * @} end of Inverse park group
+ */
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q31_to_float(
+ q31_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup LinearInterpolate Linear Interpolation
+ *
+ * Linear interpolation is a method of curve fitting using linear polynomials.
+ * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
+ *
+ * \par
+ * \image html LinearInterp.gif "Linear interpolation"
+ *
+ * \par
+ * A Linear Interpolate function calculates an output value(y), for the input(x)
+ * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
+ *
+ * \par Algorithm:
+ * <pre>
+ * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+ * where x0, x1 are nearest values of input x
+ * y0, y1 are nearest values to output y
+ * </pre>
+ *
+ * \par
+ * This set of functions implements Linear interpolation process
+ * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single
+ * sample of data and each call to the function returns a single processed value.
+ * <code>S</code> points to an instance of the Linear Interpolate function data structure.
+ * <code>x</code> is the input sample value. The functions returns the output value.
+ *
+ * \par
+ * if x is outside of the table boundary, Linear interpolation returns first value of the table
+ * if x is below input range and returns last value of table if x is above range.
+ */
+
+ /**
+ * @addtogroup LinearInterpolate
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point Linear Interpolation Function.
+ * @param[in,out] *S is an instance of the floating-point Linear Interpolation structure
+ * @param[in] x input sample to process
+ * @return y processed output sample.
+ *
+ */
+
+ static __INLINE float32_t arm_linear_interp_f32(
+ arm_linear_interp_instance_f32 * S,
+ float32_t x)
+ {
+
+ float32_t y;
+ float32_t x0, x1; /* Nearest input values */
+ float32_t y0, y1; /* Nearest output values */
+ float32_t xSpacing = S->xSpacing; /* spacing between input values */
+ int32_t i; /* Index variable */
+ float32_t *pYData = S->pYData; /* pointer to output table */
+
+ /* Calculation of index */
+ i = (int32_t) ((x - S->x1) / xSpacing);
+
+ if(i < 0)
+ {
+ /* Iniatilize output for below specified range as least output value of table */
+ y = pYData[0];
+ }
+ else if((uint32_t)i >= S->nValues)
+ {
+ /* Iniatilize output for above specified range as last output value of table */
+ y = pYData[S->nValues - 1];
+ }
+ else
+ {
+ /* Calculation of nearest input values */
+ x0 = S->x1 + i * xSpacing;
+ x1 = S->x1 + (i + 1) * xSpacing;
+
+ /* Read of nearest output values */
+ y0 = pYData[i];
+ y1 = pYData[i + 1];
+
+ /* Calculation of output */
+ y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
+
+ }
+
+ /* returns output value */
+ return (y);
+ }
+
+ /**
+ *
+ * @brief Process function for the Q31 Linear Interpolation Function.
+ * @param[in] *pYData pointer to Q31 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+
+
+ static __INLINE q31_t arm_linear_interp_q31(
+ q31_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q31_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & 0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+
+ /* 20 bits for the fractional part */
+ /* shift left by 11 to keep fract in 1.31 format */
+ fract = (x & 0x000FFFFF) << 11;
+
+ /* Read two nearest output values from the index in 1.31(q31) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1u];
+
+ /* Calculation of y0 * (1-fract) and y is in 2.30 format */
+ y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
+
+ /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
+ y += ((q31_t) (((q63_t) y1 * fract) >> 32));
+
+ /* Convert y to 1.31 format */
+ return (y << 1u);
+
+ }
+
+ }
+
+ /**
+ *
+ * @brief Process function for the Q15 Linear Interpolation Function.
+ * @param[in] *pYData pointer to Q15 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+
+
+ static __INLINE q15_t arm_linear_interp_q15(
+ q15_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q63_t y; /* output */
+ q15_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & 0xFFF00000) >> 20u);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y0 = pYData[index];
+ y1 = pYData[index + 1u];
+
+ /* Calculation of y0 * (1-fract) and y is in 13.35 format */
+ y = ((q63_t) y0 * (0xFFFFF - fract));
+
+ /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
+ y += ((q63_t) y1 * (fract));
+
+ /* convert y to 1.15 format */
+ return (y >> 20);
+ }
+
+
+ }
+
+ /**
+ *
+ * @brief Process function for the Q7 Linear Interpolation Function.
+ * @param[in] *pYData pointer to Q7 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ */
+
+
+ static __INLINE q7_t arm_linear_interp_q7(
+ q7_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q7_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ uint32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ if (x < 0)
+ {
+ return (pYData[0]);
+ }
+ index = (x >> 20) & 0xfff;
+
+
+ if(index >= (nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else
+ {
+
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index and are in 1.7(q7) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1u];
+
+ /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
+ y = ((y0 * (0xFFFFF - fract)));
+
+ /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
+ y += (y1 * fract);
+
+ /* convert y to 1.7(q7) format */
+ return (y >> 20u);
+
+ }
+
+ }
+ /**
+ * @} end of LinearInterpolate group
+ */
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return sin(x).
+ */
+
+ float32_t arm_sin_f32(
+ float32_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+
+ q31_t arm_sin_q31(
+ q31_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+
+ q15_t arm_sin_q15(
+ q15_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return cos(x).
+ */
+
+ float32_t arm_cos_f32(
+ float32_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+
+ q31_t arm_cos_q31(
+ q31_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+
+ q15_t arm_cos_q15(
+ q15_t x);
+
+
+ /**
+ * @ingroup groupFastMath
+ */
+
+
+ /**
+ * @defgroup SQRT Square Root
+ *
+ * Computes the square root of a number.
+ * There are separate functions for Q15, Q31, and floating-point data types.
+ * The square root function is computed using the Newton-Raphson algorithm.
+ * This is an iterative algorithm of the form:
+ * <pre>
+ * x1 = x0 - f(x0)/f'(x0)
+ * </pre>
+ * where <code>x1</code> is the current estimate,
+ * <code>x0</code> is the previous estimate, and
+ * <code>f'(x0)</code> is the derivative of <code>f()</code> evaluated at <code>x0</code>.
+ * For the square root function, the algorithm reduces to:
+ * <pre>
+ * x0 = in/2 [initial guess]
+ * x1 = 1/2 * ( x0 + in / x0) [each iteration]
+ * </pre>
+ */
+
+
+ /**
+ * @addtogroup SQRT
+ * @{
+ */
+
+ /**
+ * @brief Floating-point square root function.
+ * @param[in] in input value.
+ * @param[out] *pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * <code>in</code> is negative value and returns zero output for negative values.
+ */
+
+ static __INLINE arm_status arm_sqrt_f32(
+ float32_t in,
+ float32_t * pOut)
+ {
+ if(in >= 0.0f)
+ {
+
+// #if __FPU_USED
+#if (__FPU_USED == 1) && defined ( __CC_ARM )
+ *pOut = __sqrtf(in);
+#else
+ *pOut = sqrtf(in);
+#endif
+
+ return (ARM_MATH_SUCCESS);
+ }
+ else
+ {
+ *pOut = 0.0f;
+ return (ARM_MATH_ARGUMENT_ERROR);
+ }
+
+ }
+
+
+ /**
+ * @brief Q31 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
+ * @param[out] *pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * <code>in</code> is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q31(
+ q31_t in,
+ q31_t * pOut);
+
+ /**
+ * @brief Q15 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
+ * @param[out] *pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * <code>in</code> is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q15(
+ q15_t in,
+ q15_t * pOut);
+
+ /**
+ * @} end of SQRT group
+ */
+
+
+
+
+
+
+ /**
+ * @brief floating-point Circular write function.
+ */
+
+ static __INLINE void arm_circularWrite_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const int32_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = wOffset;
+ }
+
+
+
+ /**
+ * @brief floating-point Circular Read function.
+ */
+ static __INLINE void arm_circularRead_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ int32_t * dst,
+ int32_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (int32_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+ /**
+ * @brief Q15 Circular write function.
+ */
+
+ static __INLINE void arm_circularWrite_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q15_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = wOffset;
+ }
+
+
+
+ /**
+ * @brief Q15 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q15_t * dst,
+ q15_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q15_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular write function.
+ */
+
+ static __INLINE void arm_circularWrite_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q7_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = wOffset;
+ }
+
+
+
+ /**
+ * @brief Q7 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q7_t * dst,
+ q7_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q7_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+ /**
+ * @brief Sum of the squares of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Sum of the squares of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+ /**
+ * @brief Sum of the squares of the elements of a Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Mean value of a Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_mean_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult);
+
+ /**
+ * @brief Mean value of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+ void arm_mean_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Mean value of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+ void arm_mean_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Mean value of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+ void arm_mean_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Variance of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_var_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Variance of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_var_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Variance of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_var_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Root Mean Square of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_rms_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Root Mean Square of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_rms_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Root Mean Square of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_rms_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Standard deviation of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_std_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Standard deviation of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_std_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Standard deviation of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_std_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Floating-point complex magnitude
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex magnitude
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex magnitude
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex dot product
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] *realResult real part of the result returned here
+ * @param[out] *imagResult imaginary part of the result returned here
+ * @return none.
+ */
+
+ void arm_cmplx_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t numSamples,
+ q31_t * realResult,
+ q31_t * imagResult);
+
+ /**
+ * @brief Q31 complex dot product
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] *realResult real part of the result returned here
+ * @param[out] *imagResult imaginary part of the result returned here
+ * @return none.
+ */
+
+ void arm_cmplx_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t numSamples,
+ q63_t * realResult,
+ q63_t * imagResult);
+
+ /**
+ * @brief Floating-point complex dot product
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] *realResult real part of the result returned here
+ * @param[out] *imagResult imaginary part of the result returned here
+ * @return none.
+ */
+
+ void arm_cmplx_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t numSamples,
+ float32_t * realResult,
+ float32_t * imagResult);
+
+ /**
+ * @brief Q15 complex-by-real multiplication
+ * @param[in] *pSrcCmplx points to the complex input vector
+ * @param[in] *pSrcReal points to the real input vector
+ * @param[out] *pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_real_q15(
+ q15_t * pSrcCmplx,
+ q15_t * pSrcReal,
+ q15_t * pCmplxDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex-by-real multiplication
+ * @param[in] *pSrcCmplx points to the complex input vector
+ * @param[in] *pSrcReal points to the real input vector
+ * @param[out] *pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_real_q31(
+ q31_t * pSrcCmplx,
+ q31_t * pSrcReal,
+ q31_t * pCmplxDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Floating-point complex-by-real multiplication
+ * @param[in] *pSrcCmplx points to the complex input vector
+ * @param[in] *pSrcReal points to the real input vector
+ * @param[out] *pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_real_f32(
+ float32_t * pSrcCmplx,
+ float32_t * pSrcReal,
+ float32_t * pCmplxDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Minimum value of a Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *result is output pointer
+ * @param[in] index is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+
+ void arm_min_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * result,
+ uint32_t * index);
+
+ /**
+ * @brief Minimum value of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output pointer
+ * @param[in] *pIndex is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+
+ void arm_min_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+ /**
+ * @brief Minimum value of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output pointer
+ * @param[out] *pIndex is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+ void arm_min_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+ /**
+ * @brief Minimum value of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output pointer
+ * @param[out] *pIndex is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+
+ void arm_min_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q7 vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q15 vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q31 vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a floating-point vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+ /**
+ * @brief Q15 complex-by-complex multiplication
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_cmplx_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex-by-complex multiplication
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_cmplx_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Floating-point complex-by-complex multiplication
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_cmplx_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q31 vector.
+ * @param[in] *pSrc points to the floating-point input vector
+ * @param[out] *pDst points to the Q31 output vector
+ * @param[in] blockSize length of the input vector
+ * @return none.
+ */
+ void arm_float_to_q31(
+ float32_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q15 vector.
+ * @param[in] *pSrc points to the floating-point input vector
+ * @param[out] *pDst points to the Q15 output vector
+ * @param[in] blockSize length of the input vector
+ * @return none
+ */
+ void arm_float_to_q15(
+ float32_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q7 vector.
+ * @param[in] *pSrc points to the floating-point input vector
+ * @param[out] *pDst points to the Q7 output vector
+ * @param[in] blockSize length of the input vector
+ * @return none
+ */
+ void arm_float_to_q7(
+ float32_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q31_to_q15(
+ q31_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q31_to_q7(
+ q31_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the Q15 vector to floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q15_to_float(
+ q15_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q15_to_q31(
+ q15_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q15_to_q7(
+ q15_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup BilinearInterpolate Bilinear Interpolation
+ *
+ * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
+ * The underlying function <code>f(x, y)</code> is sampled on a regular grid and the interpolation process
+ * determines values between the grid points.
+ * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
+ * Bilinear interpolation is often used in image processing to rescale images.
+ * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
+ *
+ * <b>Algorithm</b>
+ * \par
+ * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
+ * For floating-point, the instance structure is defined as:
+ * <pre>
+ * typedef struct
+ * {
+ * uint16_t numRows;
+ * uint16_t numCols;
+ * float32_t *pData;
+ * } arm_bilinear_interp_instance_f32;
+ * </pre>
+ *
+ * \par
+ * where <code>numRows</code> specifies the number of rows in the table;
+ * <code>numCols</code> specifies the number of columns in the table;
+ * and <code>pData</code> points to an array of size <code>numRows*numCols</code> values.
+ * The data table <code>pTable</code> is organized in row order and the supplied data values fall on integer indexes.
+ * That is, table element (x,y) is located at <code>pTable[x + y*numCols]</code> where x and y are integers.
+ *
+ * \par
+ * Let <code>(x, y)</code> specify the desired interpolation point. Then define:
+ * <pre>
+ * XF = floor(x)
+ * YF = floor(y)
+ * </pre>
+ * \par
+ * The interpolated output point is computed as:
+ * <pre>
+ * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+ * + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+ * + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+ * + f(XF+1, YF+1) * (x-XF)*(y-YF)
+ * </pre>
+ * Note that the coordinates (x, y) contain integer and fractional components.
+ * The integer components specify which portion of the table to use while the
+ * fractional components control the interpolation processor.
+ *
+ * \par
+ * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
+ */
+
+ /**
+ * @addtogroup BilinearInterpolate
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate.
+ * @param[in] Y interpolation coordinate.
+ * @return out interpolated value.
+ */
+
+
+ static __INLINE float32_t arm_bilinear_interp_f32(
+ const arm_bilinear_interp_instance_f32 * S,
+ float32_t X,
+ float32_t Y)
+ {
+ float32_t out;
+ float32_t f00, f01, f10, f11;
+ float32_t *pData = S->pData;
+ int32_t xIndex, yIndex, index;
+ float32_t xdiff, ydiff;
+ float32_t b1, b2, b3, b4;
+
+ xIndex = (int32_t) X;
+ yIndex = (int32_t) Y;
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0
+ || yIndex > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* Calculation of index for two nearest points in X-direction */
+ index = (xIndex - 1) + (yIndex - 1) * S->numCols;
+
+
+ /* Read two nearest points in X-direction */
+ f00 = pData[index];
+ f01 = pData[index + 1];
+
+ /* Calculation of index for two nearest points in Y-direction */
+ index = (xIndex - 1) + (yIndex) * S->numCols;
+
+
+ /* Read two nearest points in Y-direction */
+ f10 = pData[index];
+ f11 = pData[index + 1];
+
+ /* Calculation of intermediate values */
+ b1 = f00;
+ b2 = f01 - f00;
+ b3 = f10 - f00;
+ b4 = f00 - f01 - f10 + f11;
+
+ /* Calculation of fractional part in X */
+ xdiff = X - xIndex;
+
+ /* Calculation of fractional part in Y */
+ ydiff = Y - yIndex;
+
+ /* Calculation of bi-linear interpolated output */
+ out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ *
+ * @brief Q31 bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+
+ static __INLINE q31_t arm_bilinear_interp_q31(
+ arm_bilinear_interp_instance_q31 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q31_t out; /* Temporary output */
+ q31_t acc = 0; /* output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q31_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q31_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & 0xFFF00000) >> 20u);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & 0xFFF00000) >> 20u);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* shift left xfract by 11 to keep 1.31 format */
+ xfract = (X & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + nCols * (cI)];
+ x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+ /* 20 bits for the fractional part */
+ /* shift left yfract by 11 to keep 1.31 format */
+ yfract = (Y & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + nCols * (cI + 1)];
+ y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
+ out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
+ acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
+
+ /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
+
+ /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* Convert acc to 1.31(q31) format */
+ return (acc << 2u);
+
+ }
+
+ /**
+ * @brief Q15 bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+
+ static __INLINE q15_t arm_bilinear_interp_q15(
+ arm_bilinear_interp_instance_q15 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q15_t x1, x2, y1, y2; /* Nearest output values */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ int32_t rI, cI; /* Row and column indices */
+ q15_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & 0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & 0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + nCols * (cI)];
+ x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + nCols * (cI + 1)];
+ y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
+
+ /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
+ /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */
+ out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
+ acc = ((q63_t) out * (0xFFFFF - yfract));
+
+ /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
+ acc += ((q63_t) out * (xfract));
+
+ /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* acc is in 13.51 format and down shift acc by 36 times */
+ /* Convert out to 1.15 format */
+ return (acc >> 36);
+
+ }
+
+ /**
+ * @brief Q7 bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+
+ static __INLINE q7_t arm_bilinear_interp_q7(
+ arm_bilinear_interp_instance_q7 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q7_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q7_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & 0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & 0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + nCols * (cI)];
+ x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + nCols * (cI + 1)];
+ y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
+ out = ((x1 * (0xFFFFF - xfract)));
+ acc = (((q63_t) out * (0xFFFFF - yfract)));
+
+ /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */
+ out = ((x2 * (0xFFFFF - yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y1 * (0xFFFFF - xfract)));
+ acc += (((q63_t) out * (yfract)));
+
+ /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y2 * (yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
+ return (acc >> 40);
+
+ }
+
+ /**
+ * @} end of BilinearInterpolate group
+ */
+
+
+//SMMLAR
+#define multAcc_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+//SMMLSR
+#define multSub_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+//SMMULR
+#define mult_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
+
+//SMMLA
+#define multAcc_32x32_keep32(a, x, y) \
+ a += (q31_t) (((q63_t) x * y) >> 32)
+
+//SMMLS
+#define multSub_32x32_keep32(a, x, y) \
+ a -= (q31_t) (((q63_t) x * y) >> 32)
+
+//SMMUL
+#define mult_32x32_keep32(a, x, y) \
+ a = (q31_t) (((q63_t) x * y ) >> 32)
+
+
+#if defined ( __CC_ARM ) //Keil
+
+//Enter low optimization region - place directly above function definition
+ #ifdef ARM_MATH_CM4
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("push") \
+ _Pragma ("O1")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+//Exit low optimization region - place directly after end of function definition
+ #ifdef ARM_MATH_CM4
+ #define LOW_OPTIMIZATION_EXIT \
+ _Pragma ("pop")
+ #else
+ #define LOW_OPTIMIZATION_EXIT
+ #endif
+
+//Enter low optimization region - place directly above function definition
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+//Exit low optimization region - place directly after end of function definition
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ICCARM__) //IAR
+
+//Enter low optimization region - place directly above function definition
+ #ifdef ARM_MATH_CM4
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+//Exit low optimization region - place directly after end of function definition
+ #define LOW_OPTIMIZATION_EXIT
+
+//Enter low optimization region - place directly above function definition
+ #ifdef ARM_MATH_CM4
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #endif
+
+//Exit low optimization region - place directly after end of function definition
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__GNUC__)
+
+ #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
+
+ #define LOW_OPTIMIZATION_EXIT
+
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__CSMC__) // Cosmic
+
+#define LOW_OPTIMIZATION_ENTER
+#define LOW_OPTIMIZATION_EXIT
+#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__TASKING__) // TASKING
+
+#define LOW_OPTIMIZATION_ENTER
+#define LOW_OPTIMIZATION_EXIT
+#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* _ARM_MATH_H */
+
+/**
+ *
+ * End of file.
+ */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_ca9.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_ca9.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,276 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#include <stdint.h>
+inline uint32_t __get_PSR(void) {
+ __ASM("mrs r0, cpsr");
+}
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_caFunc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_caFunc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1427 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 30 Oct 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coprocessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Translation Table Base Register 0.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Translation Table Base Register 0.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Domain Access Control Register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Disable MMU
+
+ Disable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate the entire data or unified cache
+
+ Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW. Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // Increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#define __inline inline
+
+inline static uint32_t __disable_irq_iar() {
+ int irq_dis = __get_CPSR() & 0x80; // 7bit CPSR.I
+ __disable_irq();
+ return irq_dis;
+}
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+// from rt_CMSIS.c
+__arm static inline void __set_PSP(uint32_t topOfProcStack) {
+__asm(
+ " ARM\n"
+// " PRESERVE8\n"
+
+ " BIC R0, R0, #7 ;ensure stack is 8-byte aligned \n"
+ " MRS R1, CPSR \n"
+ " CPS #0x1F ;no effect in USR mode \n" // MODE_SYS
+ " MOV SP, R0 \n"
+ " MSR CPSR_c, R1 ;no effect in USR mode \n"
+ " ISB \n"
+ " BX LR \n");
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+ */
+// from rt_CMSIS.c
+__arm static inline void __set_CPS_USR(void) {
+__asm(
+ " ARM \n"
+
+ " CPS #0x10 \n" // MODE_USR
+ " BX LR\n");
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Translation Table Base Register 0.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+// from mmu_Renesas_RZ_A1.c
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ __MCR(15, 0, ttbr0, 2, 0, 0); // reg to cp15
+ __ISB();
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Domain Access Control Register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+// from mmu_Renesas_RZ_A1.c
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ __MCR(15, 0, dacr, 3, 0, 0); // reg to cp15
+ __ISB();
+}
+
+
+/******************************** Cache and BTAC enable ****************************************************/
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register value to set
+ */
+// from __enable_mmu()
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr) {
+ __MCR(15, 0, sctlr, 1, 0, 0); // reg to cp15
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+// from __enable_mmu()
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ uint32_t __regSCTLR = __MRC(15, 0, 1, 0, 0);
+ return __regSCTLR;
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __enable_caches(void) {
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __enable_btac(void) {
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ uint32_t val = 0;
+ __MCR(15, 0, val, 8, 7, 0); // reg to cp15
+ __MCR(15, 0, val, 8, 6, 0); // reg to cp15
+ __MCR(15, 0, val, 8, 5, 0); // reg to cp15
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __v7_inv_btac(void) {
+ uint32_t val = 0;
+ __MCR(15, 0, val, 7, 5, 6); // reg to cp15
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ uint32_t val = 0;
+ __MCR(15, 0, val, 7, 5, 0); // reg to cp15
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+// from __v7_inv_dcache_all()
+__arm static inline void __v7_all_cache(uint32_t op) {
+__asm(
+ " ARM \n"
+
+ " PUSH {R4-R11} \n"
+
+ " MRC p15, 1, R6, c0, c0, 1\n" // Read CLIDR
+ " ANDS R3, R6, #0x07000000\n" // Extract coherency level
+ " MOV R3, R3, LSR #23\n" // Total cache levels << 1
+ " BEQ Finished\n" // If 0, no need to clean
+
+ " MOV R10, #0\n" // R10 holds current cache level << 1
+ "Loop1: ADD R2, R10, R10, LSR #1\n" // R2 holds cache "Set" position
+ " MOV R1, R6, LSR R2 \n" // Bottom 3 bits are the Cache-type for this level
+ " AND R1, R1, #7 \n" // Isolate those lower 3 bits
+ " CMP R1, #2 \n"
+ " BLT Skip \n" // No cache or only instruction cache at this level
+
+ " MCR p15, 2, R10, c0, c0, 0 \n" // Write the Cache Size selection register
+ " ISB \n" // ISB to sync the change to the CacheSizeID reg
+ " MRC p15, 1, R1, c0, c0, 0 \n" // Reads current Cache Size ID register
+ " AND R2, R1, #7 \n" // Extract the line length field
+ " ADD R2, R2, #4 \n" // Add 4 for the line length offset (log2 16 bytes)
+ " movw R4, #0x3FF \n"
+ " ANDS R4, R4, R1, LSR #3 \n" // R4 is the max number on the way size (right aligned)
+ " CLZ R5, R4 \n" // R5 is the bit position of the way size increment
+ " movw R7, #0x7FFF \n"
+ " ANDS R7, R7, R1, LSR #13 \n" // R7 is the max number of the index size (right aligned)
+
+ "Loop2: MOV R9, R4 \n" // R9 working copy of the max way size (right aligned)
+
+ "Loop3: ORR R11, R10, R9, LSL R5 \n" // Factor in the Way number and cache number into R11
+ " ORR R11, R11, R7, LSL R2 \n" // Factor in the Set number
+ " CMP R0, #0 \n"
+ " BNE Dccsw \n"
+ " MCR p15, 0, R11, c7, c6, 2 \n" // DCISW. Invalidate by Set/Way
+ " B cont \n"
+ "Dccsw: CMP R0, #1 \n"
+ " BNE Dccisw \n"
+ " MCR p15, 0, R11, c7, c10, 2 \n" // DCCSW. Clean by Set/Way
+ " B cont \n"
+ "Dccisw: MCR p15, 0, R11, c7, c14, 2 \n" // DCCISW, Clean and Invalidate by Set/Way
+ "cont: SUBS R9, R9, #1 \n" // Decrement the Way number
+ " BGE Loop3 \n"
+ " SUBS R7, R7, #1 \n" // Decrement the Set number
+ " BGE Loop2 \n"
+ "Skip: ADD R10, R10, #2 \n" // increment the cache number
+ " CMP R3, R10 \n"
+ " BGT Loop1 \n"
+
+ "Finished: \n"
+ " DSB \n"
+ " POP {R4-R11} \n"
+ " BX lr \n" );
+}
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ __MCR(15, 0, (uint32_t)va, 7, 14, 1);
+ __DMB();
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i");
+}
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, cpsr" : "=r" (result));
+ __ASM volatile ("cpsid i");
+ return(result & 0x80);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+#if 1
+ register uint32_t __regAPSR;
+ __ASM volatile ("mrs %0, apsr" : "=r" (__regAPSR) );
+#else
+ register uint32_t __regAPSR __ASM("apsr");
+#endif
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
+{
+#if 1
+ register uint32_t __regCPSR;
+ __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
+#else
+ register uint32_t __regCPSR __ASM("cpsr");
+#endif
+ return(__regCPSR);
+}
+
+#if 0
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ register uint32_t __regSP __ASM("sp");
+ __regSP = topOfStack;
+}
+#endif
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
+{
+ register uint32_t __reglr __ASM("lr");
+ return(__reglr);
+}
+
+#if 0
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ register uint32_t __reglr __ASM("lr");
+ __reglr = lr;
+}
+#endif
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __asm__ volatile (
+ ".ARM;"
+ ".eabi_attribute Tag_ABI_align8_preserved,1;"
+
+ "BIC R0, R0, #7;" /* ;ensure stack is 8-byte aligned */
+ "MRS R1, CPSR;"
+ "CPS %0;" /* ;no effect in USR mode */
+ "MOV SP, R0;"
+ "MSR CPSR_c, R1;" /* ;no effect in USR mode */
+ "ISB;"
+ //"BX LR;"
+ :
+ : "i"(MODE_SYS)
+ : "r0", "r1");
+ return;
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPS_USR(void)
+{
+ __asm__ volatile (
+ ".ARM;"
+
+ "CPS %0;"
+ //"BX LR;"
+ :
+ : "i"(MODE_USR)
+ : );
+ return;
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq() __asm__ volatile ("cpsie f")
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq() __asm__ volatile ("cpsid f")
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
+ return (result);
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
+{
+#if 1
+ register uint32_t __regCPACR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+#endif
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coprocessor Acccess Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+#endif
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
+#if 1
+ register uint32_t __regCBAR;
+ __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
+#else
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+#endif
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Translation Table Base Register 0.
+
+ \return Translation Table Base Register 0 value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
+#if 1
+ register uint32_t __regTTBR0;
+ __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+#endif
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Translation Table Base Register 0.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+#endif
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
+#if 1
+ register uint32_t __regDACR;
+ __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+#endif
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Domain Access Control Register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+#endif
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+#endif
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
+#if 1
+ register uint32_t __regSCTLR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+#endif
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Disable MMU
+
+ Disable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+#else
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+#endif
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+#else
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+#else
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate the entire data or unified cache
+
+ Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+extern void __v7_all_cache(uint32_t op);
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_caInstr.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/targets/cmsis/core_caInstr.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_ca_mmu.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_ca_mmu.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,847 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for A9_MP Device Series
+; * @version V1.01
+; * @date 10 Sept 2014
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012-2014 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not supported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cm0.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_cm0.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,740 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31 /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30 /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29 /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28 /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0 /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31 /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30 /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29 /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28 /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24 /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0 /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1 /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if((int32_t)(IRQn) < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if((int32_t)(IRQn) < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+ }
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1) { __NOP(); } /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); } /* Reload value impossible */
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cm0plus.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_cm0plus.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,854 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31 /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30 /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29 /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28 /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0 /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31 /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30 /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29 /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28 /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24 /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0 /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1 /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0 /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if((int32_t)(IRQn) < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if((int32_t)(IRQn) < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+ }
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1) { __NOP(); } /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) {return (1UL);} /* Reload value impossible */
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cm3.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_cm3.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1693 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31 /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30 /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29 /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28 /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27 /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0 /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31 /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30 /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29 /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28 /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27 /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25 /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24 /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0 /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1 /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0 /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if((int32_t)IRQn < 0) {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if((int32_t)IRQn < 0) {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8 - __NVIC_PRIO_BITS)));
+ }
+ else {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8 - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1) { __NOP(); } /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); } /* Reload value impossible */
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0UL) { __NOP(); }
+ ITM->PORT[0].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cm4.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_cm4.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1887 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cmSimd.h> /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31 /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30 /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29 /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28 /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27 /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16 /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0 /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31 /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30 /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29 /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28 /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27 /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25 /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24 /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16 /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0 /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2 /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1 /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0 /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+ #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+ #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+ #endif
+ #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+ #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
+ #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
+ #define NVIC_EnableIRQ __NVIC_EnableIRQ
+ #define NVIC_DisableIRQ __NVIC_DisableIRQ
+ #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
+ #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
+ #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
+ #define NVIC_GetActive __NVIC_GetActive
+ #define NVIC_SetPriority __NVIC_SetPriority
+ #define NVIC_GetPriority __NVIC_GetPriority
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+ #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+ #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+ #endif
+ #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+ #define NVIC_SetVector __NVIC_SetVector
+ #define NVIC_GetVector __NVIC_GetVector
+#endif /* CMSIS_VECTAB_VIRTUAL */
+
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if((int32_t)IRQn < 0) {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if((int32_t)IRQn < 0) {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8 - __NVIC_PRIO_BITS)));
+ }
+ else {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8 - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1) { __NOP(); } /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); } /* Reload value impossible */
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0UL) { __NOP(); }
+ ITM->PORT[0].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cm4_simd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_cm4_simd.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cm7.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_cm7.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2397 @@
+/**************************************************************************//**
+ * @file core_cm7.h
+ * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM7_H_GENERIC
+#define __CORE_CM7_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M7
+ @{
+ */
+
+/* CMSIS CM7 definitions */
+#define __CM7_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __CM7_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16) | \
+ __CM7_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x07) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cmSimd.h> /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM7_H_DEPENDANT
+#define __CORE_CM7_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM7_REV
+ #define __CM7_REV 0x0000
+ #warning "__CM7_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __ICACHE_PRESENT
+ #define __ICACHE_PRESENT 0
+ #warning "__ICACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DCACHE_PRESENT
+ #define __DCACHE_PRESENT 0
+ #warning "__DCACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DTCM_PRESENT
+ #define __DTCM_PRESENT 0
+ #warning "__DTCM_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 3
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M7 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31 /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30 /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29 /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28 /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27 /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16 /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0 /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31 /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30 /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29 /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28 /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27 /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25 /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24 /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16 /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0 /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2 /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1 /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0 /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHPR[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t ID_PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t ID_MFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ID_ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[1];
+ __I uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */
+ __I uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */
+ __I uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */
+ __IO uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED3[93];
+ __O uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */
+ uint32_t RESERVED4[15];
+ __I uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */
+ __I uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */
+ uint32_t RESERVED5[1];
+ __O uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */
+ uint32_t RESERVED6[1];
+ __O uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */
+ __O uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */
+ __O uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */
+ __O uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */
+ __O uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */
+ __O uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */
+ __O uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */
+ __O uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */
+ uint32_t RESERVED7[6];
+ __IO uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */
+ __IO uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */
+ __IO uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */
+ __IO uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */
+ __IO uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */
+ uint32_t RESERVED8[1];
+ __IO uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos 18 /*!< SCB CCR: Branch prediction enable bit Position */
+#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */
+
+#define SCB_CCR_IC_Pos 17 /*!< SCB CCR: Instruction cache enable bit Position */
+#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */
+
+#define SCB_CCR_DC_Pos 16 /*!< SCB CCR: Cache enable bit Position */
+#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */
+
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/* Cache Level ID register */
+#define SCB_CLIDR_LOUU_Pos 27 /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos 24 /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_FORMAT_Pos) /*!< SCB CLIDR: LoC Mask */
+
+/* Cache Type register */
+#define SCB_CTR_FORMAT_Pos 29 /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos 24 /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos 20 /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos 16 /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos 0 /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */
+
+/* Cache Size ID Register */
+#define SCB_CCSIDR_WT_Pos 31 /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk (7UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos 30 /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk (7UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos 29 /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk (7UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos 28 /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk (7UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos 13 /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3 /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos 0 /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */
+
+/* Cache Size Selection Register */
+#define SCB_CSSELR_LEVEL_Pos 1 /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos 0 /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register */
+#define SCB_STIR_INTID_Pos 0 /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register*/
+#define SCB_ITCMCR_SZ_Pos 3 /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos 2 /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos 1 /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos 0 /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Registers */
+#define SCB_DTCMCR_SZ_Pos 3 /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos 2 /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos 1 /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos 0 /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register */
+#define SCB_AHBPCR_SZ_Pos 1 /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos 0 /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register */
+#define SCB_CACR_FORCEWT_Pos 2 /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos 1 /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos 0 /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */
+
+/* AHBS control register */
+#define SCB_AHBSCR_INITCOUNT_Pos 11 /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos 2 /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos 0 /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register */
+#define SCB_ABFSR_AXIMTYPE_Pos 8 /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos 4 /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos 3 /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos 2 /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos 1 /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos 0 /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12 /*!< ACTLR: DISITMATBFLUSH Position */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */
+
+#define SCnSCB_ACTLR_DISRAMODE_Pos 11 /*!< ACTLR: DISRAMODE Position */
+#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */
+
+#define SCnSCB_ACTLR_FPEXCODIS_Pos 10 /*!< ACTLR: FPEXCODIS Position */
+#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+ uint32_t RESERVED3[981];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+ __I uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/* Media and FP Feature Register 2 */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if((int32_t)IRQn < 0) {
+ SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if((int32_t)IRQn < 0) {
+ return(((uint32_t)SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8 - __NVIC_PRIO_BITS)));
+ }
+ else {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8 - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1) { __NOP(); } /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ########################## FPU functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_FpuFunctions FPU Functions
+ \brief Function that provides FPU type.
+ @{
+ */
+
+/**
+ \fn uint32_t SCB_GetFPUType(void)
+ \brief get FPU type
+ \returns
+ - \b 0: No FPU
+ - \b 1: Single precision FPU
+ - \b 2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+ uint32_t mvfr0;
+
+ mvfr0 = SCB->MVFR0;
+ if ((mvfr0 & 0x00000FF0UL) == 0x220UL) {
+ return 2UL; // Double + Single precision FPU
+ } else if ((mvfr0 & 0x00000FF0UL) == 0x020UL) {
+ return 1UL; // Single precision FPU
+ } else {
+ return 0UL; // No FPU
+ }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ########################## Cache functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_CacheFunctions Cache Functions
+ \brief Functions that configure Instruction and Data cache.
+ @{
+ */
+
+/* Cache Size ID Register Macros */
+#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos)
+#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos )
+#define CCSIDR_LSSHIFT(x) (((x) & SCB_CCSIDR_LINESIZE_Msk ) /*>> SCB_CCSIDR_LINESIZE_Pos*/ )
+
+
+/** \brief Enable I-Cache
+
+ The function turns on I-Cache
+ */
+__STATIC_INLINE void SCB_EnableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL; // invalidate I-Cache
+ SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; // enable I-Cache
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/** \brief Disable I-Cache
+
+ The function turns off I-Cache
+ */
+__STATIC_INLINE void SCB_DisableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1)
+ __DSB();
+ __ISB();
+ SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; // disable I-Cache
+ SCB->ICIALLU = 0UL; // invalidate I-Cache
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/** \brief Invalidate I-Cache
+
+ The function invalidates I-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateICache (void)
+{
+ #if (__ICACHE_PRESENT == 1)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL;
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/** \brief Enable D-Cache
+
+ The function turns on D-Cache
+ */
+__STATIC_INLINE void SCB_EnableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1)
+ uint32_t ccsidr, sshift, wshift, sw;
+ uint32_t sets, ways;
+
+ SCB->CSSELR = (0UL << 1) | 0UL; // Level 1 data cache
+ ccsidr = SCB->CCSIDR;
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ sshift = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ wshift = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+ __DSB();
+
+ do { // invalidate D-Cache
+ uint32_t tmpways = ways;
+ do {
+ sw = ((tmpways << wshift) | (sets << sshift));
+ SCB->DCISW = sw;
+ } while(tmpways--);
+ } while(sets--);
+ __DSB();
+
+ SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; // enable D-Cache
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/** \brief Disable D-Cache
+
+ The function turns off D-Cache
+ */
+__STATIC_INLINE void SCB_DisableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1)
+ uint32_t ccsidr, sshift, wshift, sw;
+ uint32_t sets, ways;
+
+ SCB->CSSELR = (0UL << 1) | 0UL; // Level 1 data cache
+ ccsidr = SCB->CCSIDR;
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ sshift = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ wshift = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+ __DSB();
+
+ SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; // disable D-Cache
+
+ do { // clean & invalidate D-Cache
+ uint32_t tmpways = ways;
+ do {
+ sw = ((tmpways << wshift) | (sets << sshift));
+ SCB->DCCISW = sw;
+ } while(tmpways--);
+ } while(sets--);
+
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/** \brief Invalidate D-Cache
+
+ The function invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1)
+ uint32_t ccsidr, sshift, wshift, sw;
+ uint32_t sets, ways;
+
+ SCB->CSSELR = (0UL << 1) | 0UL; // Level 1 data cache
+ ccsidr = SCB->CCSIDR;
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ sshift = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ wshift = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+ __DSB();
+
+ do { // invalidate D-Cache
+ uint32_t tmpways = ways;
+ do {
+ sw = ((tmpways << wshift) | (sets << sshift));
+ SCB->DCISW = sw;
+ } while(tmpways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/** \brief Clean D-Cache
+
+ The function cleans D-Cache
+ */
+__STATIC_INLINE void SCB_CleanDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1)
+ uint32_t ccsidr, sshift, wshift, sw;
+ uint32_t sets, ways;
+
+ SCB->CSSELR = (0UL << 1) | 0UL; // Level 1 data cache
+ ccsidr = SCB->CCSIDR;
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ sshift = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ wshift = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+ __DSB();
+
+ do { // clean D-Cache
+ uint32_t tmpways = ways;
+ do {
+ sw = ((tmpways << wshift) | (sets << sshift));
+ SCB->DCCSW = sw;
+ } while(tmpways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/** \brief Clean & Invalidate D-Cache
+
+ The function cleans and Invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_CleanInvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1)
+ uint32_t ccsidr, sshift, wshift, sw;
+ uint32_t sets, ways;
+
+ SCB->CSSELR = (0UL << 1) | 0UL; // Level 1 data cache
+ ccsidr = SCB->CCSIDR;
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ sshift = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ wshift = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+ __DSB();
+
+ do { // clean & invalidate D-Cache
+ uint32_t tmpways = ways;
+ do {
+ sw = ((tmpways << wshift) | (sets << sshift));
+ SCB->DCCISW = sw;
+ } while(tmpways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \fn void SCB_InvalidateDCache_by_Addr(volatile uint32_t *addr, int32_t dsize)
+ \brief D-Cache Invalidate by address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t)addr;
+ uint32_t linesize = 32UL; // in Cortex-M7 size of cache line is fixed to 8 words (32 bytes)
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= (int32_t)linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \fn void SCB_CleanDCache_by_Addr(volatile uint32_t *addr, int32_t dsize)
+ \brief D-Cache Clean by address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ uint32_t linesize = 32UL; // in Cortex-M7 size of cache line is fixed to 8 words (32 bytes)
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= (int32_t)linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \fn void SCB_CleanInvalidateDCache_by_Addr(volatile uint32_t *addr, int32_t dsize)
+ \brief D-Cache Clean and Invalidate by address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ uint32_t linesize = 32UL; // in Cortex-M7 size of cache line is fixed to 8 words (32 bytes)
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= (int32_t)linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/*@} end of CMSIS_Core_CacheFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); } /* Reload value impossible */
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0UL) { __NOP(); }
+ ITM->PORT[0].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cmFunc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_cmFunc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,664 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Set Base Priority with condition
+
+ This function assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+ register uint32_t __regBasePriMax __ASM("basepri_max");
+ __regBasePriMax = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Set Base Priority with condition
+
+ This function assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cmInstr.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_cmInstr.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,916 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() do {\
+ __schedule_barrier();\
+ __isb(0xF);\
+ __schedule_barrier();\
+ } while (0)
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+ __schedule_barrier();\
+ __dsb(0xF);\
+ __schedule_barrier();\
+ } while (0)
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+ __schedule_barrier();\
+ __dmb(0xF);\
+ __schedule_barrier();\
+ } while (0)
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+ #define __RBIT __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; // extra shift needed at end
+
+ result = value; // r will be reversed bits of v; first get LSB of v
+ for (value >>= 1; value; value >>= 1)
+ {
+ result <<= 1;
+ result |= value & 1;
+ s--;
+ }
+ result <<= s; // shift when v's highest bits are zero
+ return(result);
+}
+#endif
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function executes a exclusive LDR instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function executes a exclusive LDR instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function executes a exclusive LDR instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function executes a exclusive STR instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function executes a exclusive STR instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function executes a exclusive STR instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Rotate Right with Extend (32 bit)
+
+ This function moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+ rrx r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief LDRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
+
+
+/** \brief LDRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
+
+
+/** \brief LDRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
+
+
+/** \brief STRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged STRT instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRBT(value, ptr) __strt(value, ptr)
+
+
+/** \brief STRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged STRT instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRHT(value, ptr) __strt(value, ptr)
+
+
+/** \brief STRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged STRT instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRT(value, ptr) __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb 0xF":::"memory");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb 0xF":::"memory");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb 0xF":::"memory");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; // extra shift needed at end
+
+ result = value; // r will be reversed bits of v; first get LSB of v
+ for (value >>= 1; value; value >>= 1)
+ {
+ result <<= 1;
+ result |= value & 1;
+ s--;
+ }
+ result <<= s; // shift when v's highest bits are zero
+#endif
+ return(result);
+}
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __builtin_clz
+
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function executes a exclusive LDR instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function executes a exclusive LDR instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function executes a exclusive LDR instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function executes a exclusive STR instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function executes a exclusive STR instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function executes a exclusive STR instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Rotate Right with Extend (32 bit)
+
+ This function moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief LDRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged STRT instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief STRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged STRT instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief STRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged STRT instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cmSecureAccess.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/targets/cmsis/core_cmSecureAccess.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,201 @@ +/**************************************************************************//** + * @file core_cmSecureAccess.h + * @brief CMSIS Cortex-M Core Secure Access Header File + * @version XXX + * @date 10. June 2016 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2016 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#ifndef __CORE_CM_SECURE_ACCESS_H +#define __CORE_CM_SECURE_ACCESS_H + + +/* ########################### Core Secure Access ########################### */ + +#ifdef FEATURE_UVISOR +#include "uvisor-lib.h" + +/* Secure uVisor implementation. */ + +/** Set the value at the target address. + * + * Equivalent to: `*address = value`. + * @param address[in] Target address + * @param value[in] Value to write at the address location. + */ +#define SECURE_WRITE(address, value) \ + uvisor_write(main, UVISOR_RGW_SHARED, address, value, UVISOR_RGW_OP_WRITE, 0xFFFFFFFFUL) + +/** Get the value at the target address. + * + * @param address[in] Target address + * @returns The value `*address`. + */ +#define SECURE_READ(address) \ + uvisor_read(main, UVISOR_RGW_SHARED, address, UVISOR_RGW_OP_READ, 0xFFFFFFFFUL) + +/** Get the selected bits at the target address. + * + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + * @returns The value `*address & mask`. + */ +#define SECURE_BITS_GET(address, mask) \ + UVISOR_BITS_GET(main, UVISOR_RGW_SHARED, address, mask) + +/** Check the selected bits at the target address. + * + * @param address[in] Address at which to check the bits + * @param mask[in] Bits to select out of the target address + * @returns The value `((*address & mask) == mask)`. + */ +#define SECURE_BITS_CHECK(address, mask) \ + UVISOR_BITS_CHECK(main, UVISOR_RGW_SHARED, address, mask) + +/** Set the selected bits to 1 at the target address. + * + * Equivalent to: `*address |= mask`. + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + */ +#define SECURE_BITS_SET(address, mask) \ + UVISOR_BITS_SET(main, UVISOR_RGW_SHARED, address, mask) + +/** Clear the selected bits at the target address. + * + * Equivalent to: `*address &= ~mask`. + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + */ +#define SECURE_BITS_CLEAR(address, mask) \ + UVISOR_BITS_CLEAR(main, UVISOR_RGW_SHARED, address, mask) + +/** Set the selected bits at the target address to the given value. + * + * Equivalent to: `*address = (*address & ~mask) | (value & mask)`. + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + * @param value[in] Value to write at the address location. Note: The value + * must be already shifted to the correct bit position + */ +#define SECURE_BITS_SET_VALUE(address, mask, value) \ + UVISOR_BITS_SET_VALUE(main, UVISOR_RGW_SHARED, address, mask, value) + +/** Toggle the selected bits at the target address. + * + * Equivalent to: `*address ^= mask`. + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + */ +#define SECURE_BITS_TOGGLE(address, mask) \ + UVISOR_BITS_TOGGLE(main, UVISOR_RGW_SHARED, address, mask) + +#else + +/* Insecure fallback implementation. */ + +/** Set the value at the target address. + * + * Equivalent to: `*address = value`. + * @param address[in] Target address + * @param value[in] Value to write at the address location. + */ +#define SECURE_WRITE(address, value) \ + *(address) = (value) + +/** Get the value at the target address. + * + * @param address[in] Target address + * @returns The value `*address`. + */ +#define SECURE_READ(address) \ + (*(address)) + +/** Get the selected bits at the target address. + * + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + * @returns The value `*address & mask`. + */ +#define SECURE_BITS_GET(address, mask) \ + (*(address) & (mask)) + +/** Check the selected bits at the target address. + * + * @param address[in] Address at which to check the bits + * @param mask[in] Bits to select out of the target address + * @returns The value `((*address & mask) == mask)`. + */ +#define SECURE_BITS_CHECK(address, mask) \ + ((*(address) & (mask)) == (mask)) + +/** Set the selected bits to 1 at the target address. + * + * Equivalent to: `*address |= mask`. + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + */ +#define SECURE_BITS_SET(address, mask) \ + *(address) |= (mask) + +/** Clear the selected bits at the target address. + * + * Equivalent to: `*address &= ~mask`. + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + */ +#define SECURE_BITS_CLEAR(address, mask) \ + *(address) &= ~(mask) + +/** Set the selected bits at the target address to the given value. + * + * Equivalent to: `*address = (*address & ~mask) | (value & mask)`. + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + * @param value[in] Value to write at the address location. Note: The value + * must be already shifted to the correct bit position + */ +#define SECURE_BITS_SET_VALUE(address, mask, value) \ + *(address) = (*(address) & ~(mask)) | ((value) & (mask)) + +/** Toggle the selected bits at the target address. + * + * Equivalent to: `*address ^= mask`. + * @param address[in] Target address + * @param mask[in] Bits to select out of the target address + */ +#define SECURE_BITS_TOGGLE(address, mask) \ + *(address) ^= (mask) + +#endif + +#endif /* __CORE_CM_SECURE_ACCESS_H */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_cmSimd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_cmSimd.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,697 @@
+/**************************************************************************//**
+ * @file core_cmSimd.h
+ * @brief CMSIS Cortex-M SIMD Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CMSIMD_H
+#define __CORE_CMSIMD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ // Little endian
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else // Big endian
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ // Little endian
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else // Big endian
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ // Little endian
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else // Big endian
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ // Little endian
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else // Big endian
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/* not yet supported */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CMSIMD_H */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_sc000.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_sc000.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,864 @@
+/**************************************************************************//**
+ * @file core_sc000.h
+ * @brief CMSIS SC000 Core Peripheral Access Layer Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_SC000_H_GENERIC
+#define __CORE_SC000_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup SC000
+ @{
+ */
+
+/* CMSIS SC000 definitions */
+#define __SC000_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16) | \
+ __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (000) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC000_H_DEPENDANT
+#define __CORE_SC000_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC000_REV
+ #define __SC000_REV 0x0000
+ #warning "__SC000_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group SC000 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31 /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30 /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29 /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28 /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0 /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31 /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30 /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29 /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28 /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24 /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0 /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1 /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED0[1];
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ uint32_t RESERVED1[154];
+ __IO uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of SC000 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if((int32_t)(IRQn) < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if((int32_t)(IRQn) < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+ }
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1) { __NOP(); } /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) {return (1UL);} /* Reload value impossible */
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/cmsis/core_sc300.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/cmsis/core_sc300.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1675 @@
+/**************************************************************************//**
+ * @file core_sc300.h
+ * @brief CMSIS SC300 Core Peripheral Access Layer Header File
+ * @version V4.10
+ * @date 18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_SC300_H_GENERIC
+#define __CORE_SC300_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup SC3000
+ @{
+ */
+
+/* CMSIS SC300 definitions */
+#define __SC300_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __SC300_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16) | \
+ __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (300) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC300_H_DEPENDANT
+#define __CORE_SC300_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC300_REV
+ #define __SC300_REV 0x0000
+ #warning "__SC300_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group SC300 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31 /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30 /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29 /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28 /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27 /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0 /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31 /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30 /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29 /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28 /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27 /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25 /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24 /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0 /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1 /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0 /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED1[129];
+ __IO uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ uint32_t RESERVED1[1];
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if((int32_t)IRQn < 0) {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if((int32_t)IRQn < 0) {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8 - __NVIC_PRIO_BITS)));
+ }
+ else {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8 - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1) { __NOP(); } /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); } /* Reload value impossible */
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0UL) { __NOP(); }
+ ITM->PORT[0].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/PeripheralPins.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,72 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; +extern const PinMap PinMap_UART_RTS[]; +extern const PinMap PinMap_UART_CTS[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +//*** CAN *** +extern const PinMap PinMap_CAN_RD[]; +extern const PinMap PinMap_CAN_TD[]; + +#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,215 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
+ {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
+ {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_IN17
+ {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_IN18
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
+// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
+ {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
+ {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
+ {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
+ {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
+ {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
+ {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RTS[] = {
+ {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ // {PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // MEMs
+ // {PC_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
+ // {PD_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART3)}, // LED D4
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_CTS[] = {
+ {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ // {PB_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ // {PC_9, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
+ // {PD_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART3)}, // LED D4
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,191 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
+#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
+#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // ADC internal channels
+ ADC_TEMP = 0xF0,
+ ADC_VREF = 0xF1,
+ ADC_VBAT = 0xF2,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ LED_RED = LED1,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,89 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+ uint8_t channel;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+#include "common_objects.h"
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,211 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "mbed_assert.h"
+#include "analogin_api.h"
+
+#if DEVICE_ANALOGIN
+
+#include "wait_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "PeripheralPins.h"
+
+ADC_HandleTypeDef AdcHandle;
+
+void analogin_init(analogin_t *obj, PinName pin)
+{
+#if defined(ADC1)
+ static int adc1_inited = 0;
+#endif
+#if defined(ADC2)
+ static int adc2_inited = 0;
+#endif
+#if defined(ADC3)
+ static int adc3_inited = 0;
+#endif
+ // Get the peripheral name from the pin and assign it to the object
+ obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
+ MBED_ASSERT(obj->adc != (ADCName)NC);
+
+ // Get the functions (adc channel) from the pin and assign it to the object
+ uint32_t function = pinmap_function(pin, PinMap_ADC);
+ MBED_ASSERT(function != (uint32_t)NC);
+ obj->channel = STM_PIN_CHANNEL(function);
+
+ // Configure GPIO excepted for internal channels (Temperature, Vref, Vbat)
+ if ((obj->channel != 16) && (obj->channel != 17) && (obj->channel != 18)) {
+ pinmap_pinout(pin, PinMap_ADC);
+ }
+
+ // Save pin number for the read function
+ obj->pin = pin;
+
+ // Check if ADC is already initialized
+ // Enable ADC clock
+#if defined(ADC1)
+ if ((obj->adc == ADC_1) && adc1_inited) return;
+ if (obj->adc == ADC_1) {
+ __ADC1_CLK_ENABLE();
+ adc1_inited = 1;
+ }
+#endif
+#if defined(ADC2)
+ if ((obj->adc == ADC_2) && adc2_inited) return;
+ if (obj->adc == ADC_2) {
+ __ADC2_CLK_ENABLE();
+ adc2_inited = 1;
+ }
+#endif
+#if defined(ADC3)
+ if ((obj->adc == ADC_3) && adc3_inited) return;
+ if (obj->adc == ADC_3) {
+ __ADC3_CLK_ENABLE();
+ adc3_inited = 1;
+ }
+#endif
+ // Configure ADC
+ AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+ AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
+ AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
+ AdcHandle.Init.ScanConvMode = DISABLE;
+ AdcHandle.Init.ContinuousConvMode = DISABLE;
+ AdcHandle.Init.DiscontinuousConvMode = DISABLE;
+ AdcHandle.Init.NbrOfDiscConversion = 0;
+ AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
+ AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ AdcHandle.Init.NbrOfConversion = 1;
+ AdcHandle.Init.DMAContinuousRequests = DISABLE;
+ AdcHandle.Init.EOCSelection = DISABLE;
+
+ if (HAL_ADC_Init(&AdcHandle) != HAL_OK) {
+ error("Cannot initialize ADC\n");
+ }
+}
+
+static inline uint16_t adc_read(analogin_t *obj)
+{
+ ADC_ChannelConfTypeDef sConfig = {0};
+
+ AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+
+ // Configure ADC channel
+ sConfig.Rank = 1;
+ sConfig.SamplingTime = ADC_SAMPLETIME_15CYCLES;
+ sConfig.Offset = 0;
+
+ switch (obj->channel) {
+ case 0:
+ sConfig.Channel = ADC_CHANNEL_0;
+ break;
+ case 1:
+ sConfig.Channel = ADC_CHANNEL_1;
+ break;
+ case 2:
+ sConfig.Channel = ADC_CHANNEL_2;
+ break;
+ case 3:
+ sConfig.Channel = ADC_CHANNEL_3;
+ break;
+ case 4:
+ sConfig.Channel = ADC_CHANNEL_4;
+ break;
+ case 5:
+ sConfig.Channel = ADC_CHANNEL_5;
+ break;
+ case 6:
+ sConfig.Channel = ADC_CHANNEL_6;
+ break;
+ case 7:
+ sConfig.Channel = ADC_CHANNEL_7;
+ break;
+ case 8:
+ sConfig.Channel = ADC_CHANNEL_8;
+ break;
+ case 9:
+ sConfig.Channel = ADC_CHANNEL_9;
+ break;
+ case 10:
+ sConfig.Channel = ADC_CHANNEL_10;
+ break;
+ case 11:
+ sConfig.Channel = ADC_CHANNEL_11;
+ break;
+ case 12:
+ sConfig.Channel = ADC_CHANNEL_12;
+ break;
+ case 13:
+ sConfig.Channel = ADC_CHANNEL_13;
+ break;
+ case 14:
+ sConfig.Channel = ADC_CHANNEL_14;
+ break;
+ case 15:
+ sConfig.Channel = ADC_CHANNEL_15;
+ break;
+ case 16:
+ sConfig.Channel = ADC_CHANNEL_16;
+ break;
+ case 17:
+ sConfig.Channel = ADC_CHANNEL_17;
+ break;
+ case 18:
+ sConfig.Channel = ADC_CHANNEL_18;
+ break;
+ default:
+ return 0;
+ }
+
+ HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
+
+ HAL_ADC_Start(&AdcHandle); // Start conversion
+
+ // Wait end of conversion and get value
+ if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
+ return (HAL_ADC_GetValue(&AdcHandle));
+ } else {
+ return 0;
+ }
+}
+
+uint16_t analogin_read_u16(analogin_t *obj)
+{
+ uint16_t value = adc_read(obj);
+ // 12-bit to 16-bit conversion
+ value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
+ return value;
+}
+
+float analogin_read(analogin_t *obj)
+{
+ uint16_t value = adc_read(obj);
+ return (float)value * (1.0f / (float)0xFFF); // 12 bits range
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,147 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "analogout_api.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "stm32f4xx_hal.h"
+#include "PeripheralPins.h"
+
+#define DAC_RANGE (0xFFF) // 12 bits
+#define DAC_NB_BITS (12)
+
+DAC_HandleTypeDef DacHandle;
+static DAC_ChannelConfTypeDef sConfig;
+
+void analogout_init(dac_t *obj, PinName pin) {
+ uint32_t channel ;
+ HAL_StatusTypeDef status;
+
+ // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
+ obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
+ // Get the functions (dac channel) from the pin and assign it to the object
+ uint32_t function = pinmap_function(pin, PinMap_DAC);
+ MBED_ASSERT(function != (uint32_t)NC);
+ // Save the channel for the write and read functions
+ obj->channel = STM_PIN_CHANNEL(function);
+
+ if (obj->dac == (DACName)NC) {
+ error("DAC pin mapping failed");
+ }
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_DAC);
+
+ __GPIOA_CLK_ENABLE();
+
+ __DAC_CLK_ENABLE();
+
+ DacHandle.Instance = DAC;
+
+ status = HAL_DAC_Init(&DacHandle);
+ if ( status != HAL_OK ) {
+ error("HAL_DAC_Init failed");
+ }
+
+ sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
+ sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+
+ if (obj->channel == 1) {
+ channel = DAC_CHANNEL_1;
+ } else {
+ channel = DAC_CHANNEL_2;
+ }
+
+ if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
+ error("HAL_DAC_ConfigChannel failed");
+ }
+
+ if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
+ error("HAL_DAC_Start failed");
+ }
+
+ if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
+ error("HAL_DAC_SetValue failed");
+ }
+
+}
+
+void analogout_free(dac_t *obj) {
+}
+
+static inline void dac_write(dac_t *obj, int value) {
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ if (obj->channel == 1) {
+ status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, (value & DAC_RANGE));
+ } else if (obj->channel == 2) {
+ status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, (value & DAC_RANGE));
+ }
+
+ if ( status != HAL_OK ) {
+ error("DAC pin mapping failed");
+ }
+}
+
+static inline int dac_read(dac_t *obj) {
+ if (obj->channel == 1) {
+ return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
+ } else if (obj->channel == 2) {
+ return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
+ }
+ return 0; /* Just silented warning */
+}
+
+void analogout_write(dac_t *obj, float value) {
+ if (value < 0.0f) {
+ dac_write(obj, 0); // Min value
+ } else if (value > 1.0f) {
+ dac_write(obj, (int)DAC_RANGE); // Max value
+ } else {
+ dac_write(obj, (int)(value * (float)DAC_RANGE));
+ }
+}
+
+void analogout_write_u16(dac_t *obj, uint16_t value) {
+ dac_write(obj, value >> (16 - DAC_NB_BITS));
+}
+
+float analogout_read(dac_t *obj) {
+ uint32_t value = dac_read(obj);
+ return (float)value * (1.0f / (float)DAC_RANGE);
+}
+
+uint16_t analogout_read_u16(dac_t *obj) {
+ uint32_t value = dac_read(obj);
+ return (value << 4) | ((value >> 8) & 0x000F); // Conversion from 12 to 16 bits
+}
+
+#endif // DEVICE_ANALOGOUT
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/can_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/can_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,536 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "can_api.h"
+
+#if DEVICE_CAN
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+#include <math.h>
+#include <string.h>
+
+#define CAN_NUM 2
+static CAN_HandleTypeDef CanHandle;
+static uint32_t can_irq_ids[CAN_NUM] = {0};
+static can_irq_handler irq_handler;
+
+void can_init(can_t *obj, PinName rd, PinName td)
+{
+ uint32_t filter_number;
+ CANName can_rd = (CANName)pinmap_peripheral(rd, PinMap_CAN_RD);
+ CANName can_td = (CANName)pinmap_peripheral(td, PinMap_CAN_TD);
+ obj->can = (CANName)pinmap_merge(can_rd, can_td);
+ MBED_ASSERT((int)obj->can != NC);
+
+ if(obj->can == CAN_1) {
+ __HAL_RCC_CAN1_CLK_ENABLE();
+ obj->index = 0;
+ } else {
+ __HAL_RCC_CAN2_CLK_ENABLE();
+ obj->index = 1;
+ }
+
+ // Configure the CAN pins
+ pinmap_pinout(rd, PinMap_CAN_RD);
+ pinmap_pinout(td, PinMap_CAN_TD);
+ if (rd != NC) {
+ pin_mode(rd, PullUp);
+ }
+ if (td != NC) {
+ pin_mode(td, PullUp);
+ }
+
+ CanHandle.Instance = (CAN_TypeDef *)(obj->can);
+
+ CanHandle.Init.TTCM = DISABLE;
+ CanHandle.Init.ABOM = DISABLE;
+ CanHandle.Init.AWUM = DISABLE;
+ CanHandle.Init.NART = DISABLE;
+ CanHandle.Init.RFLM = DISABLE;
+ CanHandle.Init.TXFP = DISABLE;
+ CanHandle.Init.Mode = CAN_MODE_NORMAL;
+ CanHandle.Init.SJW = CAN_SJW_1TQ;
+ CanHandle.Init.BS1 = CAN_BS1_6TQ;
+ CanHandle.Init.BS2 = CAN_BS2_8TQ;
+ CanHandle.Init.Prescaler = 2;
+
+ if (HAL_CAN_Init(&CanHandle) != HAL_OK) {
+ error("Cannot initialize CAN");
+ }
+
+ filter_number = (obj->can == CAN_1) ? 0 : 14;
+
+ // Set initial CAN frequency to 100kb/s
+ can_frequency(obj, 100000);
+
+ can_filter(obj, 0, 0, CANStandard, filter_number);
+}
+
+void can_irq_init(can_t *obj, can_irq_handler handler, uint32_t id)
+{
+ irq_handler = handler;
+ can_irq_ids[obj->index] = id;
+}
+
+void can_irq_free(can_t *obj)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ can->IER &= ~(CAN_IT_FMP0 | CAN_IT_FMP1 | CAN_IT_TME | \
+ CAN_IT_ERR | CAN_IT_EPV | CAN_IT_BOF);
+ can_irq_ids[obj->can] = 0;
+}
+
+void can_free(can_t *obj)
+{
+ // Reset CAN and disable clock
+ if (obj->can == CAN_1) {
+ __HAL_RCC_CAN1_FORCE_RESET();
+ __HAL_RCC_CAN1_RELEASE_RESET();
+ __HAL_RCC_CAN1_CLK_DISABLE();
+ }
+
+ if (obj->can == CAN_2) {
+ __HAL_RCC_CAN2_FORCE_RESET();
+ __HAL_RCC_CAN2_RELEASE_RESET();
+ __HAL_RCC_CAN2_CLK_DISABLE();
+ }
+}
+
+// The following table is used to program bit_timing. It is an adjustment of the sample
+// point by synchronizing on the start-bit edge and resynchronizing on the following edges.
+// This table has the sampling points as close to 75% as possible (most commonly used).
+// The first value is TSEG1, the second TSEG2.
+static const int timing_pts[23][2] = {
+ {0x0, 0x0}, // 2, 50%
+ {0x1, 0x0}, // 3, 67%
+ {0x2, 0x0}, // 4, 75%
+ {0x3, 0x0}, // 5, 80%
+ {0x3, 0x1}, // 6, 67%
+ {0x4, 0x1}, // 7, 71%
+ {0x5, 0x1}, // 8, 75%
+ {0x6, 0x1}, // 9, 78%
+ {0x6, 0x2}, // 10, 70%
+ {0x7, 0x2}, // 11, 73%
+ {0x8, 0x2}, // 12, 75%
+ {0x9, 0x2}, // 13, 77%
+ {0x9, 0x3}, // 14, 71%
+ {0xA, 0x3}, // 15, 73%
+ {0xB, 0x3}, // 16, 75%
+ {0xC, 0x3}, // 17, 76%
+ {0xD, 0x3}, // 18, 78%
+ {0xD, 0x4}, // 19, 74%
+ {0xE, 0x4}, // 20, 75%
+ {0xF, 0x4}, // 21, 76%
+ {0xF, 0x5}, // 22, 73%
+ {0xF, 0x6}, // 23, 70%
+ {0xF, 0x7}, // 24, 67%
+};
+
+static unsigned int can_speed(unsigned int pclk, unsigned int cclk, unsigned char psjw)
+{
+ uint32_t btr;
+ uint16_t brp = 0;
+ uint32_t calcbit;
+ uint32_t bitwidth;
+ int hit = 0;
+ int bits;
+
+ bitwidth = (pclk / cclk);
+
+ brp = bitwidth / 0x18;
+ while ((!hit) && (brp < bitwidth / 4)) {
+ brp++;
+ for (bits = 22; bits > 0; bits--) {
+ calcbit = (bits + 3) * (brp + 1);
+ if (calcbit == bitwidth) {
+ hit = 1;
+ break;
+ }
+ }
+ }
+
+ if (hit) {
+ btr = ((timing_pts[bits][1] << 20) & 0x00700000)
+ | ((timing_pts[bits][0] << 16) & 0x000F0000)
+ | ((psjw << 24) & 0x0000C000)
+ | ((brp << 0) & 0x000003FF);
+ } else {
+ btr = 0xFFFFFFFF;
+ }
+
+ return btr;
+
+}
+
+int can_frequency(can_t *obj, int f)
+{
+ int pclk = HAL_RCC_GetPCLK1Freq();
+ int btr = can_speed(pclk, (unsigned int)f, 1);
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ if (btr > 0) {
+ can->MCR |= CAN_MCR_INRQ ;
+ while((can->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) {
+ }
+ can->BTR = btr;
+ can->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+ while((can->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) {
+ }
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+int can_write(can_t *obj, CAN_Message msg, int cc)
+{
+ uint32_t transmitmailbox = 5;
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ /* Select one empty transmit mailbox */
+ if ((can->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) {
+ transmitmailbox = 0;
+ } else if ((can->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) {
+ transmitmailbox = 1;
+ } else if ((can->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) {
+ transmitmailbox = 2;
+ } else {
+ transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+ }
+
+ if (transmitmailbox != CAN_TXSTATUS_NOMAILBOX) {
+ can->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+ if (!(msg.format))
+ {
+ can->sTxMailBox[transmitmailbox].TIR |= ((msg.id << 21) | msg.type);
+ }
+ else
+ {
+ can->sTxMailBox[transmitmailbox].TIR |= ((msg.id << 3) | CAN_ID_EXT | msg.type);
+ }
+
+ /* Set up the DLC */
+ can->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+ can->sTxMailBox[transmitmailbox].TDTR |= (msg.len & (uint8_t)0x0000000F);
+
+ /* Set up the data field */
+ can->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)msg.data[3] << 24) |
+ ((uint32_t)msg.data[2] << 16) |
+ ((uint32_t)msg.data[1] << 8) |
+ ((uint32_t)msg.data[0]));
+ can->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)msg.data[7] << 24) |
+ ((uint32_t)msg.data[6] << 16) |
+ ((uint32_t)msg.data[5] << 8) |
+ ((uint32_t)msg.data[4]));
+ /* Request transmission */
+ can->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+ }
+
+ return 1;
+}
+
+int can_read(can_t *obj, CAN_Message *msg, int handle)
+{
+ //handle is the FIFO number
+
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ /* Get the Id */
+ msg->format = (CANFormat)((uint8_t)0x04 & can->sFIFOMailBox[handle].RIR);
+ if (!msg->format) {
+ msg->id = (uint32_t)0x000007FF & (can->sFIFOMailBox[handle].RIR >> 21);
+ } else {
+ msg->id = (uint32_t)0x1FFFFFFF & (can->sFIFOMailBox[handle].RIR >> 3);
+ }
+
+ msg->type = (CANType)((uint8_t)0x02 & can->sFIFOMailBox[handle].RIR);
+ /* Get the DLC */
+ msg->len = (uint8_t)0x0F & can->sFIFOMailBox[handle].RDTR;
+// /* Get the FMI */
+// msg->FMI = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDTR >> 8);
+ /* Get the data field */
+ msg->data[0] = (uint8_t)0xFF & can->sFIFOMailBox[handle].RDLR;
+ msg->data[1] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDLR >> 8);
+ msg->data[2] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDLR >> 16);
+ msg->data[3] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDLR >> 24);
+ msg->data[4] = (uint8_t)0xFF & can->sFIFOMailBox[handle].RDHR;
+ msg->data[5] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDHR >> 8);
+ msg->data[6] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDHR >> 16);
+ msg->data[7] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDHR >> 24);
+
+ /* Release the FIFO */
+ if(handle == CAN_FIFO0) {
+ /* Release FIFO0 */
+ can->RF0R = CAN_RF0R_RFOM0;
+ } else { /* FIFONumber == CAN_FIFO1 */
+ /* Release FIFO1 */
+ can->RF1R = CAN_RF1R_RFOM1;
+ }
+
+ return 1;
+}
+
+void can_reset(can_t *obj)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ can->MCR |= CAN_MCR_RESET;
+ can->ESR = 0x0;
+}
+
+unsigned char can_rderror(can_t *obj)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+ return (can->ESR >> 24) & 0xFF;
+}
+
+unsigned char can_tderror(can_t *obj)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+ return (can->ESR >> 16) & 0xFF;
+}
+
+void can_monitor(can_t *obj, int silent)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ can->MCR |= CAN_MCR_INRQ ;
+ while((can->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) {
+ }
+ if (silent) {
+ can->BTR |= ((uint32_t)1 << 31);
+ } else {
+ can->BTR &= ~((uint32_t)1 << 31);
+ }
+ can->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+ while((can->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) {
+ }
+}
+
+int can_mode(can_t *obj, CanMode mode)
+{
+ int success = 0;
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+ can->MCR |= CAN_MCR_INRQ ;
+ while((can->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) {
+ }
+ switch (mode) {
+ case MODE_NORMAL:
+ can->BTR &= ~(CAN_BTR_SILM | CAN_BTR_LBKM);
+ success = 1;
+ break;
+ case MODE_SILENT:
+ can->BTR |= CAN_BTR_SILM;
+ can->BTR &= ~CAN_BTR_LBKM;
+ success = 1;
+ break;
+ case MODE_TEST_GLOBAL:
+ case MODE_TEST_LOCAL:
+ can->BTR |= CAN_BTR_LBKM;
+ can->BTR &= ~CAN_BTR_SILM;
+ success = 1;
+ break;
+ case MODE_TEST_SILENT:
+ can->BTR |= (CAN_BTR_SILM | CAN_BTR_LBKM);
+ success = 1;
+ break;
+ default:
+ success = 0;
+ break;
+ }
+ can->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+ while((can->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) {
+ }
+ return success;
+}
+
+int can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle)
+{
+ CanHandle.Instance = (CAN_TypeDef *)(obj->can);
+ CAN_FilterConfTypeDef sFilterConfig;
+
+ sFilterConfig.FilterNumber = handle;
+ sFilterConfig.FilterMode = CAN_FILTERMODE_IDMASK;
+ sFilterConfig.FilterScale = CAN_FILTERSCALE_32BIT;
+ sFilterConfig.FilterIdHigh = (uint8_t) (id >> 8);
+ sFilterConfig.FilterIdLow = (uint8_t) id;
+ sFilterConfig.FilterMaskIdHigh = (uint8_t) (mask >> 8);
+ sFilterConfig.FilterMaskIdLow = (uint8_t) mask;
+ sFilterConfig.FilterFIFOAssignment = 0;
+ sFilterConfig.FilterActivation = ENABLE;
+ sFilterConfig.BankNumber = 14 + handle;
+
+ HAL_CAN_ConfigFilter(&CanHandle, &sFilterConfig);
+
+ return 0;
+}
+
+static void can_irq(CANName name, int id)
+{
+ uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
+ CanHandle.Instance = (CAN_TypeDef *)name;
+
+ if(__HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_TME)) {
+ tmp1 = __HAL_CAN_TRANSMIT_STATUS(&CanHandle, CAN_TXMAILBOX_0);
+ tmp2 = __HAL_CAN_TRANSMIT_STATUS(&CanHandle, CAN_TXMAILBOX_1);
+ tmp3 = __HAL_CAN_TRANSMIT_STATUS(&CanHandle, CAN_TXMAILBOX_2);
+ if(tmp1 || tmp2 || tmp3)
+ {
+ irq_handler(can_irq_ids[id], IRQ_TX);
+ }
+ }
+
+ tmp1 = __HAL_CAN_MSG_PENDING(&CanHandle, CAN_FIFO0);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_FMP0);
+
+ if((tmp1 != 0) && tmp2) {
+ irq_handler(can_irq_ids[id], IRQ_RX);
+ }
+
+ tmp1 = __HAL_CAN_GET_FLAG(&CanHandle, CAN_FLAG_EPV);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_EPV);
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_ERR);
+
+ if(tmp1 && tmp2 && tmp3) {
+ irq_handler(can_irq_ids[id], IRQ_PASSIVE);
+ }
+
+ tmp1 = __HAL_CAN_GET_FLAG(&CanHandle, CAN_FLAG_BOF);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_BOF);
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_ERR);
+ if(tmp1 && tmp2 && tmp3) {
+ irq_handler(can_irq_ids[id], IRQ_BUS);
+ }
+
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_ERR);
+ if(tmp1 && tmp2 && tmp3) {
+ irq_handler(can_irq_ids[id], IRQ_ERROR);
+ }
+}
+
+void CAN1_RX0_IRQHandler(void)
+{
+ can_irq(CAN_1, 0);
+}
+
+void CAN1_TX_IRQHandler(void)
+{
+ can_irq(CAN_1, 0);
+}
+
+void CAN1_SCE_IRQHandler(void)
+{
+ can_irq(CAN_1, 0);
+}
+
+void CAN2_RX0_IRQHandler(void)
+{
+ can_irq(CAN_2, 1);
+}
+
+void CAN2_TX_IRQHandler(void)
+{
+ can_irq(CAN_2, 1);
+}
+
+void CAN2_SCE_IRQHandler(void)
+{
+ can_irq(CAN_2, 1);
+}
+
+void can_irq_set(can_t *obj, CanIrqType type, uint32_t enable)
+{
+
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+ uint32_t ier;
+
+ if(obj->can == CAN_1) {
+ switch (type) {
+ case IRQ_RX:
+ ier = CAN_IT_FMP0;
+ irq_n = CAN1_RX0_IRQn;
+ vector = (uint32_t)&CAN1_RX0_IRQHandler;
+ break;
+ case IRQ_TX:
+ ier = CAN_IT_TME;
+ irq_n = CAN1_TX_IRQn;
+ vector = (uint32_t)&CAN1_TX_IRQHandler;
+ break;
+ case IRQ_ERROR:
+ ier = CAN_IT_ERR;
+ irq_n = CAN1_SCE_IRQn;
+ vector = (uint32_t)&CAN1_SCE_IRQHandler;
+ break;
+ case IRQ_PASSIVE:
+ ier = CAN_IT_EPV;
+ irq_n = CAN1_SCE_IRQn;
+ vector = (uint32_t)&CAN1_SCE_IRQHandler;
+ break;
+ case IRQ_BUS:
+ ier = CAN_IT_BOF;
+ irq_n = CAN1_SCE_IRQn;
+ vector = (uint32_t)&CAN1_SCE_IRQHandler;
+ break;
+ default: return;
+ }
+ } else {
+ switch (type) {
+ case IRQ_RX:
+ ier = CAN_IT_FMP0;
+ irq_n = CAN2_RX0_IRQn;
+ vector = (uint32_t)&CAN2_RX0_IRQHandler;
+ break;
+ case IRQ_TX:
+ ier = CAN_IT_TME;
+ irq_n = CAN2_TX_IRQn;
+ vector = (uint32_t)&CAN2_TX_IRQHandler;
+ break;
+ case IRQ_ERROR:
+ ier = CAN_IT_ERR;
+ irq_n = CAN2_SCE_IRQn;
+ vector = (uint32_t)&CAN2_SCE_IRQHandler;
+ break;
+ case IRQ_PASSIVE:
+ ier = CAN_IT_EPV;
+ irq_n = CAN2_SCE_IRQn;
+ vector = (uint32_t)&CAN2_SCE_IRQHandler;
+ break;
+ case IRQ_BUS:
+ ier = CAN_IT_BOF;
+ irq_n = CAN2_SCE_IRQn;
+ vector = (uint32_t)&CAN2_SCE_IRQHandler;
+ break;
+ default: return;
+ }
+ }
+
+ if(enable) {
+ can->IER |= ier;
+ } else {
+ can->IER &= ~ier;
+ }
+
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+}
+
+#endif // DEVICE_CAN
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/common_objects.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/common_objects.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,78 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_COMMON_OBJECTS_H
+#define MBED_COMMON_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t prescaler;
+ uint32_t period;
+ uint32_t pulse;
+ uint8_t channel;
+ uint8_t inverted;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index;
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+#if DEVICE_SERIAL_ASYNCH
+ uint32_t events;
+#endif
+#if DEVICE_SERIAL_FC
+ uint32_t hw_flow_ctl;
+ PinName pin_rts;
+ PinName pin_cts;
+#endif
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/device.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/device.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,40 @@ +// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches. +// Check the 'features' section of the target description in 'targets.json' for more details. +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +//======================================= +#define DEVICE_ID_LENGTH 24 + +#include "objects.h" + +#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/entropy_hardware_poll.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/entropy_hardware_poll.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,85 @@
+/*
+ * Hardware entropy collector for the STM32F4 family
+ *
+ * Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+
+#if defined(TARGET_STM32F405xx) || defined(TARGET_STM32F415xx) || defined(TARGET_STM32F407xx) || defined(TARGET_STM32F417xx) ||\
+ defined(TARGET_STM32F427xx) || defined(TARGET_STM32F437xx) || defined(TARGET_STM32F429xx) || defined(TARGET_STM32F439xx) ||\
+ defined(TARGET_STM32F410Tx) || defined(TARGET_STM32F410Cx) || defined(TARGET_STM32F410Rx) || defined(TARGET_STM32F469xx) ||\
+ defined(TARGET_STM32F479xx)
+#include <stdlib.h>
+#include "cmsis.h"
+
+/* RNG handler declaration */
+RNG_HandleTypeDef RngHandle;
+
+
+/** rng_get_byte
+ * @brief Get one byte of entropy from the RNG, assuming it is up and running.
+ * @param pointer to the hardware generated random byte.
+ */
+static void rng_get_byte( unsigned char *byte )
+{
+ *byte = (unsigned char)HAL_RNG_GetRandomNumber(&RngHandle);
+}
+
+
+/** mbedtls_hardware_poll
+ * @brief Get len bytes of entropy from the hardware RNG.
+ * @param data pointer will be NULL
+ * @param output pointer to the random generated bytes buffer
+ * @param len input is the requested length of bytes to be generated
+ * @param olen is the pointer to the length of bytes effectively generated
+ * @returns 0 if the generation went well. -1 in case of error
+ */
+int mbedtls_hardware_poll( void *data, unsigned char *output, size_t len, size_t *olen )
+{
+ int ret;
+ ((void) data);
+
+ /* RNG Peripheral clock enable */
+ __HAL_RCC_RNG_CLK_ENABLE();
+
+ /* Initialize RNG instance */
+ RngHandle.Instance = RNG;
+ HAL_RNG_Init(&RngHandle);
+
+ /* Get Random byte */
+ for( uint32_t i = 0; i < len; i++ ){
+ rng_get_byte( output + i );
+
+ }
+ *olen = len;
+ /* Just be extra sure that we didn't do it wrong */
+ if( ( __HAL_RNG_GET_FLAG(&RngHandle, (RNG_FLAG_CECS|RNG_FLAG_SECS)) ) != 0 ) {
+ ret = -1;
+ } else {
+ ret = 0;
+ }
+ /*Disable the RNG peripheral */
+ HAL_RNG_DeInit(&RngHandle);
+ /* RNG Peripheral clock disable - assume we're the only users of RNG */
+ __HAL_RCC_RNG_CLK_DISABLE();
+
+
+ return( ret );
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F410xx || STM32F469xx || STM32F479xx */
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "gpio_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+uint32_t gpio_set(PinName pin)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+
+ pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
+}
+
+void gpio_init(gpio_t *obj, PinName pin)
+{
+ obj->pin = pin;
+ if (pin == (PinName)NC)
+ return;
+
+ uint32_t port_index = STM_PORT(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Fill GPIO object structure for future use
+ obj->mask = gpio_set(pin);
+ obj->reg_in = &gpio->IDR;
+ obj->reg_set_clr = &gpio->BSRR;
+}
+
+void gpio_mode(gpio_t *obj, PinMode mode)
+{
+ pin_mode(obj->pin, mode);
+}
+
+void gpio_dir(gpio_t *obj, PinDirection direction)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (direction == PIN_OUTPUT) {
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+ } else { // PIN_INPUT
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ }
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,332 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include <stddef.h>
+#include "cmsis.h"
+#include "gpio_irq_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+#define EDGE_NONE (0)
+#define EDGE_RISE (1)
+#define EDGE_FALL (2)
+#define EDGE_BOTH (3)
+
+// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
+#define CHANNEL_NUM (7)
+
+// Max pins for one line (max with EXTI10_15)
+#define MAX_PIN_LINE (6)
+
+typedef struct gpio_channel {
+ uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
+ uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
+ uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
+ uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
+} gpio_channel_t;
+
+static gpio_channel_t channels[CHANNEL_NUM] = {
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0}
+};
+
+// Used to return the index for channels array.
+static uint32_t pin_base_nr[16] = {
+ // EXTI0
+ 0, // pin 0
+ // EXTI1
+ 0, // pin 1
+ // EXTI2
+ 0, // pin 2
+ // EXTI3
+ 0, // pin 3
+ // EXTI4
+ 0, // pin 4
+ // EXTI5_9
+ 0, // pin 5
+ 1, // pin 6
+ 2, // pin 7
+ 3, // pin 8
+ 4, // pin 9
+ // EXTI10_15
+ 0, // pin 10
+ 1, // pin 11
+ 2, // pin 12
+ 3, // pin 13
+ 4, // pin 14
+ 5 // pin 15
+};
+
+static gpio_irq_handler irq_handler;
+
+static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
+{
+ gpio_channel_t *gpio_channel = &channels[irq_index];
+ uint32_t gpio_idx;
+
+ for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
+ uint32_t current_mask = (1 << gpio_idx);
+
+ if (gpio_channel->pin_mask & current_mask) {
+ // Retrieve the gpio and pin that generate the irq
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
+ uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
+
+ // Clear interrupt flag
+ if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
+ __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
+
+ if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
+
+ // Check which edge has generated the irq
+ if ((gpio->IDR & pin) == 0) {
+ irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
+ } else {
+ irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
+ }
+ }
+ }
+ }
+}
+
+// EXTI line 0
+static void gpio_irq0(void)
+{
+ handle_interrupt_in(0, 1);
+}
+
+// EXTI line 1
+static void gpio_irq1(void)
+{
+ handle_interrupt_in(1, 1);
+}
+
+// EXTI line 2
+static void gpio_irq2(void)
+{
+ handle_interrupt_in(2, 1);
+}
+
+// EXTI line 3
+static void gpio_irq3(void)
+{
+ handle_interrupt_in(3, 1);
+}
+
+// EXTI line 4
+static void gpio_irq4(void)
+{
+ handle_interrupt_in(4, 1);
+}
+
+// EXTI lines 5 to 9
+static void gpio_irq5(void)
+{
+ handle_interrupt_in(5, 5);
+}
+
+// EXTI lines 10 to 15
+static void gpio_irq6(void)
+{
+ handle_interrupt_in(6, 6);
+}
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
+{
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+ uint32_t irq_index;
+ gpio_channel_t *gpio_channel;
+ uint32_t gpio_idx;
+
+ if (pin == NC) return -1;
+
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Select irq number and interrupt routine
+ switch (pin_index) {
+ case 0:
+ irq_n = EXTI0_IRQn;
+ vector = (uint32_t)&gpio_irq0;
+ irq_index = 0;
+ break;
+ case 1:
+ irq_n = EXTI1_IRQn;
+ vector = (uint32_t)&gpio_irq1;
+ irq_index = 1;
+ break;
+ case 2:
+ irq_n = EXTI2_IRQn;
+ vector = (uint32_t)&gpio_irq2;
+ irq_index = 2;
+ break;
+ case 3:
+ irq_n = EXTI3_IRQn;
+ vector = (uint32_t)&gpio_irq3;
+ irq_index = 3;
+ break;
+ case 4:
+ irq_n = EXTI4_IRQn;
+ vector = (uint32_t)&gpio_irq4;
+ irq_index = 4;
+ break;
+ case 5:
+ case 6:
+ case 7:
+ case 8:
+ case 9:
+ irq_n = EXTI9_5_IRQn;
+ vector = (uint32_t)&gpio_irq5;
+ irq_index = 5;
+ break;
+ case 10:
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ case 15:
+ irq_n = EXTI15_10_IRQn;
+ vector = (uint32_t)&gpio_irq6;
+ irq_index = 6;
+ break;
+ default:
+ error("InterruptIn error: pin not supported.\n");
+ return -1;
+ }
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+
+ // Configure GPIO
+ pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
+
+ // Enable EXTI interrupt
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+
+ // Save informations for future use
+ obj->irq_n = irq_n;
+ obj->irq_index = irq_index;
+ obj->event = EDGE_NONE;
+ obj->pin = pin;
+
+ gpio_channel = &channels[irq_index];
+ gpio_idx = pin_base_nr[pin_index];
+ gpio_channel->pin_mask |= (1 << gpio_idx);
+ gpio_channel->channel_ids[gpio_idx] = id;
+ gpio_channel->channel_gpio[gpio_idx] = gpio_add;
+ gpio_channel->channel_pin[gpio_idx] = pin_index;
+
+ irq_handler = handler;
+
+ return 0;
+}
+
+void gpio_irq_free(gpio_irq_t *obj)
+{
+ gpio_channel_t *gpio_channel = &channels[obj->irq_index];
+ uint32_t pin_index = STM_PIN(obj->pin);
+ uint32_t gpio_idx = pin_base_nr[pin_index];
+
+ gpio_channel->pin_mask &= ~(1 << gpio_idx);
+ gpio_channel->channel_ids[gpio_idx] = 0;
+ gpio_channel->channel_gpio[gpio_idx] = 0;
+ gpio_channel->channel_pin[gpio_idx] = 0;
+
+ // Disable EXTI line
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ obj->event = EDGE_NONE;
+}
+
+void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
+{
+ uint32_t mode = STM_MODE_IT_EVT_RESET;
+ uint32_t pull = GPIO_NOPULL;
+
+ if (enable) {
+ if (event == IRQ_RISE) {
+ if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING_FALLING;
+ obj->event = EDGE_BOTH;
+ } else { // NONE or RISE
+ mode = STM_MODE_IT_RISING;
+ obj->event = EDGE_RISE;
+ }
+ }
+ if (event == IRQ_FALL) {
+ if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING_FALLING;
+ obj->event = EDGE_BOTH;
+ } else { // NONE or FALL
+ mode = STM_MODE_IT_FALLING;
+ obj->event = EDGE_FALL;
+ }
+ }
+ } else { // Disable
+ if (event == IRQ_RISE) {
+ if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_FALLING;
+ obj->event = EDGE_FALL;
+ } else { // NONE or RISE
+ mode = STM_MODE_IT_EVT_RESET;
+ obj->event = EDGE_NONE;
+ }
+ }
+ if (event == IRQ_FALL) {
+ if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING;
+ obj->event = EDGE_RISE;
+ } else { // NONE or FALL
+ mode = STM_MODE_IT_EVT_RESET;
+ obj->event = EDGE_NONE;
+ }
+ }
+ }
+
+ pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
+}
+
+void gpio_irq_enable(gpio_irq_t *obj)
+{
+ NVIC_EnableIRQ(obj->irq_n);
+}
+
+void gpio_irq_disable(gpio_irq_t *obj)
+{
+ NVIC_DisableIRQ(obj->irq_n);
+ obj->event = EDGE_NONE;
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_object.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_object.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,74 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_set_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set_clr = obj->mask;
+ } else {
+ *obj->reg_set_clr = obj->mask << 16;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,529 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "i2c_api.h"
+
+#if DEVICE_I2C
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+
+/* Timeout values for flags and events waiting loops. These timeouts are
+ not based on accurate values, they just guarantee that the application will
+ not remain stuck if the I2C communication is corrupted. */
+#define FLAG_TIMEOUT ((int)0x1000)
+#define LONG_TIMEOUT ((int)0x8000)
+
+I2C_HandleTypeDef I2cHandle;
+
+int i2c1_inited = 0;
+int i2c2_inited = 0;
+int i2c3_inited = 0;
+int fmpi2c1_inited = 0;
+
+void i2c_init(i2c_t *obj, PinName sda, PinName scl)
+{
+ // Determine the I2C to use
+ I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
+ I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
+
+ obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
+ MBED_ASSERT(obj->i2c != (I2CName)NC);
+
+ // Enable I2C1 clock and pinout if not done
+ if ((obj->i2c == I2C_1) && !i2c1_inited) {
+ i2c1_inited = 1;
+ __I2C1_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+ // Enable I2C2 clock and pinout if not done
+ if ((obj->i2c == I2C_2) && !i2c2_inited) {
+ i2c2_inited = 1;
+ __I2C2_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+#if defined I2C3_BASE
+ // Enable I2C3 clock and pinout if not done
+ if ((obj->i2c == I2C_3) && !i2c3_inited) {
+ i2c3_inited = 1;
+ __I2C3_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+#endif
+
+#if defined FMPI2C1_BASE
+ // Enable I2C3 clock and pinout if not done
+ if ((obj->i2c == FMPI2C_1) && !fmpi2c1_inited) {
+ fmpi2c1_inited = 1;
+ __HAL_RCC_FMPI2C1_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+#endif
+
+ // Reset to clear pending flags if any
+ i2c_reset(obj);
+
+ // I2C configuration
+ i2c_frequency(obj, 100000); // 100 kHz per default
+
+ // I2C master by default
+ obj->slave = 0;
+}
+
+void i2c_frequency(i2c_t *obj, int hz)
+{
+ MBED_ASSERT((hz > 0) && (hz <= 400000));
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ // wait before init
+ timeout = LONG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+
+ // I2C configuration
+ I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
+ I2cHandle.Init.ClockSpeed = hz;
+ I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
+ I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
+ I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
+ I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
+ I2cHandle.Init.OwnAddress1 = 0;
+ I2cHandle.Init.OwnAddress2 = 0;
+ HAL_I2C_Init(&I2cHandle);
+ if (obj->slave) {
+ /* Enable Address Acknowledge */
+ I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+}
+
+inline int i2c_start(i2c_t *obj)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ // Clear Acknowledge failure flag
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
+
+ // Wait the STOP condition has been previously correctly sent
+ // This timeout can be avoid in some specific cases by simply clearing the STOP bit
+ timeout = FLAG_TIMEOUT;
+ while ((i2c->CR1 & I2C_CR1_STOP) == I2C_CR1_STOP) {
+ if ((timeout--) == 0) {
+ return 1;
+ }
+ }
+
+ // Generate the START condition
+ i2c->CR1 |= I2C_CR1_START;
+
+ // Wait the START condition has been correctly sent
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
+ if ((timeout--) == 0) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+inline int i2c_stop(i2c_t *obj)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+
+ // Generate the STOP condition
+ i2c->CR1 |= I2C_CR1_STOP;
+
+ return 0;
+}
+
+int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+ int count;
+ int value;
+
+ i2c_start(obj);
+
+ // Wait until SB flag is set
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+
+ i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
+
+
+ // Wait address is acknowledged
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
+
+ // Read all bytes except last one
+ for (count = 0; count < (length - 1); count++) {
+ value = i2c_byte_read(obj, 0);
+ data[count] = (char)value;
+ }
+
+ // If not repeated start, send stop.
+ // Warning: must be done BEFORE the data is read.
+ if (stop) {
+ i2c_stop(obj);
+ }
+
+ // Read the last byte
+ value = i2c_byte_read(obj, 1);
+ data[count] = (char)value;
+
+ return length;
+}
+
+int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+ int count;
+
+ i2c_start(obj);
+
+ // Wait until SB flag is set
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+
+ i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
+
+
+ // Wait address is acknowledged
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
+
+ for (count = 0; count < length; count++) {
+ if (i2c_byte_write(obj, data[count]) != 1) {
+ i2c_stop(obj);
+ return -1;
+ }
+ }
+
+ // If not repeated start, send stop.
+ if (stop) {
+ i2c_stop(obj);
+ }
+
+ return count;
+}
+
+int i2c_byte_read(i2c_t *obj, int last)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ if (last) {
+ // Don't acknowledge the last byte
+ i2c->CR1 &= ~I2C_CR1_ACK;
+ } else {
+ // Acknowledge the byte
+ i2c->CR1 |= I2C_CR1_ACK;
+ }
+
+ // Wait until the byte is received
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
+ if ((timeout--) == 0) {
+ return -1;
+ }
+ }
+
+ return (int)i2c->DR;
+}
+
+int i2c_byte_write(i2c_t *obj, int data)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ i2c->DR = (uint8_t)data;
+
+ // Wait until the byte is transmitted
+ timeout = FLAG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
+ (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
+ if ((timeout--) == 0) {
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+void i2c_reset(i2c_t *obj)
+{
+ int timeout;
+
+ // wait before reset
+ timeout = LONG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+
+ if (obj->i2c == I2C_1) {
+ __I2C1_FORCE_RESET();
+ __I2C1_RELEASE_RESET();
+ }
+ if (obj->i2c == I2C_2) {
+ __I2C2_FORCE_RESET();
+ __I2C2_RELEASE_RESET();
+ }
+#if defined I2C3_BASE
+ if (obj->i2c == I2C_3) {
+ __I2C3_FORCE_RESET();
+ __I2C3_RELEASE_RESET();
+ }
+#endif
+
+#if defined FMPI2C1_BASE
+ if (obj->i2c == FMPI2C_1) {
+ __HAL_RCC_FMPI2C1_FORCE_RESET();
+ __HAL_RCC_FMPI2C1_RELEASE_RESET();
+ }
+#endif
+}
+
+#if DEVICE_I2CSLAVE
+
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ uint16_t tmpreg = 0;
+
+ // Get the old register value
+ tmpreg = i2c->OAR1;
+ // Reset address bits
+ tmpreg &= 0xFC00;
+ // Set new address
+ tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
+ // Store the new register value
+ i2c->OAR1 = tmpreg;
+}
+
+void i2c_slave_mode(i2c_t *obj, int enable_slave)
+{
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ if (enable_slave) {
+ obj->slave = 1;
+ /* Enable Address Acknowledge */
+ I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
+ }
+}
+
+// See I2CSlave.h
+#define NoData 0 // the slave has not been addressed
+#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
+#define WriteGeneral 2 // the master is writing to all slave
+#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
+
+int i2c_slave_receive(i2c_t *obj)
+{
+ int retValue = NoData;
+
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
+ retValue = ReadAddressed;
+ else
+ retValue = WriteAddressed;
+
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
+ }
+ }
+
+ return (retValue);
+}
+
+int i2c_slave_read(i2c_t *obj, char *data, int length)
+{
+ uint32_t Timeout;
+ int size = 0;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ while (length > 0) {
+ /* Wait until RXNE flag is set */
+ // Wait until the byte is received
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ /* Read data from DR */
+ (*data++) = I2cHandle.Instance->DR;
+ length--;
+ size++;
+
+ if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
+ /* Read data from DR */
+ (*data++) = I2cHandle.Instance->DR;
+ length--;
+ size++;
+ }
+ }
+
+ /* Wait until STOP flag is set */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
+
+ /* Wait until BUSY flag is reset */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ return size;
+}
+
+int i2c_slave_write(i2c_t *obj, const char *data, int length)
+{
+ uint32_t Timeout;
+ int size = 0;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ while (length > 0) {
+ /* Wait until TXE flag is set */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+
+ /* Write data to DR */
+ I2cHandle.Instance->DR = (*data++);
+ length--;
+ size++;
+
+ if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
+ /* Write data to DR */
+ I2cHandle.Instance->DR = (*data++);
+ length--;
+ size++;
+ }
+ }
+
+ /* Wait until AF flag is set */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
+
+
+ /* Wait until BUSY flag is reset */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ I2cHandle.State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&I2cHandle);
+
+ return size;
+}
+
+
+#endif // DEVICE_I2CSLAVE
+
+#endif // DEVICE_I2C
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "cmsis.h"
+#include "us_ticker_api.h"
+
+// This function is called after RAM initialization and before main.
+void mbed_sdk_init()
+{
+ // Update the SystemCoreClock variable.
+ SystemCoreClockUpdate();
+ // Need to restart HAL driver after the RAM is initialized
+ HAL_Init();
+}
+
+/**
+ * @brief This function provides accurate delay (in milliseconds) based
+ * on variable incremented.
+ * @note This function is the modified version of the __weak version contained in
+ * stm32f4xx_hal.c, using us_ticker
+ * @param Delay: specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+void HAL_Delay(__IO uint32_t Delay)
+{
+ uint32_t start = us_ticker_read();
+ while ((us_ticker_read() - start) < (uint32_t)(Delay * 1000));
+}
+
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,182 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "pinmap.h"
+#include "PortNames.h"
+#include "mbed_error.h"
+
+// GPIO mode look-up table
+static const uint32_t gpio_mode[13] = {
+ 0x00000000, // 0 = GPIO_MODE_INPUT
+ 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
+ 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
+ 0x00000002, // 3 = GPIO_MODE_AF_PP
+ 0x00000012, // 4 = GPIO_MODE_AF_OD
+ 0x00000003, // 5 = GPIO_MODE_ANALOG
+ 0x10110000, // 6 = GPIO_MODE_IT_RISING
+ 0x10210000, // 7 = GPIO_MODE_IT_FALLING
+ 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
+ 0x10120000, // 9 = GPIO_MODE_EVT_RISING
+ 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
+ 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
+ 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
+};
+
+// Enable GPIO clock and return GPIO base address
+uint32_t Set_GPIO_Clock(uint32_t port_idx)
+{
+ uint32_t gpio_add = 0;
+ switch (port_idx) {
+ case PortA:
+ gpio_add = GPIOA_BASE;
+ __GPIOA_CLK_ENABLE();
+ break;
+ case PortB:
+ gpio_add = GPIOB_BASE;
+ __GPIOB_CLK_ENABLE();
+ break;
+ case PortC:
+ gpio_add = GPIOC_BASE;
+ __GPIOC_CLK_ENABLE();
+ break;
+#if defined GPIOD_BASE
+ case PortD:
+ gpio_add = GPIOD_BASE;
+ __GPIOD_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOE_BASE
+ case PortE:
+ gpio_add = GPIOE_BASE;
+ __GPIOE_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOF_BASE
+ case PortF:
+ gpio_add = GPIOF_BASE;
+ __GPIOF_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOG_BASE
+ case PortG:
+ gpio_add = GPIOG_BASE;
+ __GPIOG_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOH_BASE
+ case PortH:
+ gpio_add = GPIOH_BASE;
+ __GPIOH_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOI_BASE
+ case PortI:
+ gpio_add = GPIOI_BASE;
+ __GPIOI_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOJ_BASE
+ case PortJ:
+ gpio_add = GPIOJ_BASE;
+ __GPIOJ_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOK_BASE
+ case PortK:
+ gpio_add = GPIOK_BASE;
+ __GPIOK_CLK_ENABLE();
+ break;
+#endif
+ default:
+ error("Pinmap error: wrong port number.");
+ break;
+ }
+ return gpio_add;
+}
+
+/**
+ * Configure pin (mode, speed, output type and pull-up/pull-down)
+ */
+void pin_function(PinName pin, int data)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+ // Get the pin informations
+ uint32_t mode = STM_PIN_MODE(data);
+ uint32_t pupd = STM_PIN_PUPD(data);
+ uint32_t afnum = STM_PIN_AFNUM(data);
+
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Configure GPIO
+ GPIO_InitTypeDef GPIO_InitStructure;
+ GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
+ GPIO_InitStructure.Mode = gpio_mode[mode];
+ GPIO_InitStructure.Pull = pupd;
+ GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
+ GPIO_InitStructure.Alternate = afnum;
+ HAL_GPIO_Init(gpio, &GPIO_InitStructure);
+
+ // [TODO] Disconnect JTAG-DP + SW-DP signals.
+ // Warning: Need to reconnect under reset
+ //if ((pin == PA_13) || (pin == PA_14)) {
+ //
+ //}
+ //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
+ //
+ //}
+}
+
+/**
+ * Configure pin pull-up/pull-down
+ */
+void pin_mode(PinName pin, PinMode mode)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Configure pull-up/pull-down resistors
+ uint32_t pupd = (uint32_t)mode;
+ if (pupd > 2) {
+ pupd = 0; // Open-drain = No pull-up/No pull-down
+ }
+ gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
+ gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
+
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "port_api.h"
+#include "pinmap.h"
+#include "gpio_api.h"
+#include "mbed_error.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
+// low nibble = pin number
+PinName port_pin(PortName port, int pin_n)
+{
+ return (PinName)(pin_n + (port << 4));
+}
+
+void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
+{
+ uint32_t port_index = (uint32_t)port;
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Fill PORT object structure for future use
+ obj->port = port;
+ obj->mask = mask;
+ obj->direction = dir;
+ obj->reg_in = &gpio->IDR;
+ obj->reg_out = &gpio->ODR;
+
+ port_dir(obj, dir);
+}
+
+void port_dir(port_t *obj, PinDirection dir)
+{
+ uint32_t i;
+ obj->direction = dir;
+ for (i = 0; i < 16; i++) { // Process all pins
+ if (obj->mask & (1 << i)) { // If the pin is used
+ if (dir == PIN_OUTPUT) {
+ pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+ } else { // PIN_INPUT
+ pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ }
+ }
+ }
+}
+
+void port_mode(port_t *obj, PinMode mode)
+{
+ uint32_t i;
+ for (i = 0; i < 16; i++) { // Process all pins
+ if (obj->mask & (1 << i)) { // If the pin is used
+ pin_mode(port_pin(obj->port, i), mode);
+ }
+ }
+}
+
+void port_write(port_t *obj, int value)
+{
+ *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
+}
+
+int port_read(port_t *obj)
+{
+ if (obj->direction == PIN_OUTPUT) {
+ return (*obj->reg_out & obj->mask);
+ } else { // PIN_INPUT
+ return (*obj->reg_in & obj->mask);
+ }
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,302 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "pwmout_api.h"
+
+#if DEVICE_PWMOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "PeripheralPins.h"
+
+static TIM_HandleTypeDef TimHandle;
+
+void pwmout_init(pwmout_t* obj, PinName pin)
+{
+ // Get the peripheral name from the pin and assign it to the object
+ obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
+ MBED_ASSERT(obj->pwm != (PWMName)NC);
+
+ // Get the functions (timer channel, (non)inverted) from the pin and assign it to the object
+ uint32_t function = pinmap_function(pin, PinMap_PWM);
+ MBED_ASSERT(function != (uint32_t)NC);
+ obj->channel = STM_PIN_CHANNEL(function);
+ obj->inverted = STM_PIN_INVERTED(function);
+
+ // Enable TIM clock
+#if defined(TIM1_BASE)
+ if (obj->pwm == PWM_1) __HAL_RCC_TIM1_CLK_ENABLE();
+#endif
+#if defined(TIM2_BASE)
+ if (obj->pwm == PWM_2) __HAL_RCC_TIM2_CLK_ENABLE();
+#endif
+#if defined(TIM3_BASE)
+ if (obj->pwm == PWM_3) __HAL_RCC_TIM3_CLK_ENABLE();
+#endif
+#if defined(TIM4_BASE)
+ if (obj->pwm == PWM_4) __HAL_RCC_TIM4_CLK_ENABLE();
+#endif
+#if defined(TIM5_BASE)
+ if (obj->pwm == PWM_5) __HAL_RCC_TIM5_CLK_ENABLE();
+#endif
+#if defined(TIM8_BASE)
+ if (obj->pwm == PWM_8) __HAL_RCC_TIM8_CLK_ENABLE();
+#endif
+#if defined(TIM9_BASE)
+ if (obj->pwm == PWM_9) __HAL_RCC_TIM9_CLK_ENABLE();
+#endif
+#if defined(TIM10_BASE)
+ if (obj->pwm == PWM_10) __HAL_RCC_TIM10_CLK_ENABLE();
+#endif
+#if defined(TIM11_BASE)
+ if (obj->pwm == PWM_11) __HAL_RCC_TIM11_CLK_ENABLE();
+#endif
+#if defined(TIM12_BASE)
+ if (obj->pwm == PWM_12) __HAL_RCC_TIM12_CLK_ENABLE();
+#endif
+#if defined(TIM13_BASE)
+ if (obj->pwm == PWM_13) __HAL_RCC_TIM13_CLK_ENABLE();
+#endif
+#if defined(TIM14_BASE)
+ if (obj->pwm == PWM_14) __HAL_RCC_TIM14_CLK_ENABLE();
+#endif
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_PWM);
+
+ obj->pin = pin;
+ obj->period = 0;
+ obj->pulse = 0;
+ obj->prescaler = 1;
+
+ pwmout_period_us(obj, 20000); // 20 ms per default
+}
+
+void pwmout_free(pwmout_t* obj)
+{
+ // Configure GPIO
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void pwmout_write(pwmout_t* obj, float value)
+{
+ TIM_OC_InitTypeDef sConfig;
+ int channel = 0;
+
+ TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+
+ if (value < (float)0.0) {
+ value = 0.0;
+ } else if (value > (float)1.0) {
+ value = 1.0;
+ }
+
+ obj->pulse = (uint32_t)((float)obj->period * value);
+
+ // Configure channels
+ sConfig.OCMode = TIM_OCMODE_PWM1;
+ sConfig.Pulse = obj->pulse / obj->prescaler;
+ sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
+ sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ sConfig.OCFastMode = TIM_OCFAST_DISABLE;
+ sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
+ sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+
+ switch (obj->channel) {
+ case 1:
+ channel = TIM_CHANNEL_1;
+ break;
+ case 2:
+ channel = TIM_CHANNEL_2;
+ break;
+ case 3:
+ channel = TIM_CHANNEL_3;
+ break;
+ case 4:
+ channel = TIM_CHANNEL_4;
+ break;
+ default:
+ return;
+ }
+
+ if (HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel) != HAL_OK) {
+ error("Cannot initialize PWM\n");
+ }
+
+ if (obj->inverted) {
+ HAL_TIMEx_PWMN_Start(&TimHandle, channel);
+ } else {
+ HAL_TIM_PWM_Start(&TimHandle, channel);
+ }
+}
+
+float pwmout_read(pwmout_t* obj)
+{
+ float value = 0;
+ if (obj->period > 0) {
+ value = (float)(obj->pulse) / (float)(obj->period);
+ }
+ return ((value > (float)1.0) ? (float)(1.0) : (value));
+}
+
+void pwmout_period(pwmout_t* obj, float seconds)
+{
+ pwmout_period_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_period_ms(pwmout_t* obj, int ms)
+{
+ pwmout_period_us(obj, ms * 1000);
+}
+
+void pwmout_period_us(pwmout_t* obj, int us)
+{
+ TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ uint32_t PclkFreq;
+ uint32_t APBxCLKDivider;
+ float dc = pwmout_read(obj);
+
+ __HAL_TIM_DISABLE(&TimHandle);
+
+ // Get clock configuration
+ // Note: PclkFreq contains here the Latency (not used after)
+ HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
+
+ // Get the PCLK and APBCLK divider related to the timer
+ switch (obj->pwm) {
+
+ // APB1 clock
+#if defined(TIM2_BASE)
+ case PWM_2:
+#endif
+#if defined(TIM3_BASE)
+ case PWM_3:
+#endif
+#if defined(TIM4_BASE)
+ case PWM_4:
+#endif
+#if defined(TIM5_BASE)
+ case PWM_5:
+#endif
+#if defined(TIM12_BASE)
+ case PWM_12:
+#endif
+#if defined(TIM13_BASE)
+ case PWM_13:
+#endif
+#if defined(TIM14_BASE)
+ case PWM_14:
+#endif
+ PclkFreq = HAL_RCC_GetPCLK1Freq();
+ APBxCLKDivider = RCC_ClkInitStruct.APB1CLKDivider;
+ break;
+
+ // APB2 clock
+#if defined(TIM1_BASE)
+ case PWM_1:
+#endif
+#if defined(TIM8_BASE)
+ case PWM_8:
+#endif
+#if defined(TIM9_BASE)
+ case PWM_9:
+#endif
+#if defined(TIM10_BASE)
+ case PWM_10:
+#endif
+#if defined(TIM11_BASE)
+ case PWM_11:
+#endif
+ PclkFreq = HAL_RCC_GetPCLK2Freq();
+ APBxCLKDivider = RCC_ClkInitStruct.APB2CLKDivider;
+ break;
+ default:
+ return;
+ }
+
+ /* To make it simple, we use to possible prescaler values which lead to:
+ * pwm unit = 1us, period/pulse can be from 1us to 65535us
+ * or
+ * pwm unit = 500us, period/pulse can be from 500us to ~32.76sec
+ * Be careful that all the channels of a PWM shares the same prescaler
+ */
+ if (us > 0xFFFF) {
+ obj->prescaler = 500;
+ } else {
+ obj->prescaler = 1;
+ }
+
+ // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
+ if (APBxCLKDivider == RCC_HCLK_DIV1)
+ TimHandle.Init.Prescaler = (uint16_t)(((PclkFreq) / 1000000) * obj->prescaler) - 1; // 1 us tick
+ else
+ TimHandle.Init.Prescaler = (uint16_t)(((PclkFreq * 2) / 1000000) * obj->prescaler) - 1; // 1 us tick
+
+ if (TimHandle.Init.Prescaler > 0xFFFF)
+ error("PWM: out of range prescaler");
+
+ TimHandle.Init.Period = (us - 1) / obj->prescaler;
+ if (TimHandle.Init.Period > 0xFFFF)
+ error("PWM: out of range period");
+
+ TimHandle.Init.ClockDivision = 0;
+ TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+
+ if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
+ error("Cannot initialize PWM\n");
+ }
+
+ // Save for future use
+ obj->period = us;
+
+ // Set duty cycle again
+ pwmout_write(obj, dc);
+
+ __HAL_TIM_ENABLE(&TimHandle);
+}
+
+void pwmout_pulsewidth(pwmout_t* obj, float seconds)
+{
+ pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
+{
+ pwmout_pulsewidth_us(obj, ms * 1000);
+}
+
+void pwmout_pulsewidth_us(pwmout_t* obj, int us)
+{
+ float value = (float)us / (float)obj->period;
+ pwmout_write(obj, value);
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,221 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "rtc_api.h"
+
+#if DEVICE_RTC
+
+#include "mbed_error.h"
+
+#if DEVICE_RTC_LSI
+static int rtc_inited = 0;
+#endif
+
+static RTC_HandleTypeDef RtcHandle;
+
+void rtc_init(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ uint32_t rtc_freq = 0;
+
+#if DEVICE_RTC_LSI
+ rtc_inited = 1;
+#endif
+
+ RtcHandle.Instance = RTC;
+
+#if !DEVICE_RTC_LSI
+ // Enable LSE Oscillator
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
+ RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
+ // Connect LSE to RTC
+ __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
+ rtc_freq = LSE_VALUE;
+ }
+ else {
+ error("RTC error: LSE clock initialization failed.");
+ }
+#else
+ // Enable Power clock
+ __PWR_CLK_ENABLE();
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Enable LSI clock
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ error("RTC error: LSI clock initialization failed.");
+ }
+ // Connect LSI to RTC
+ __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
+ // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
+ rtc_freq = LSI_VALUE;
+#endif
+
+ // Enable RTC
+ __HAL_RCC_RTC_ENABLE();
+
+ RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
+ RtcHandle.Init.AsynchPrediv = 127;
+ RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
+ RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
+ RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+ RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
+
+ if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
+ error("RTC error: RTC initialization failed.");
+ }
+}
+
+void rtc_free(void)
+{
+#if DEVICE_RTC_LSI
+ // Enable Power clock
+ __PWR_CLK_ENABLE();
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Disable access to Backup domain
+ HAL_PWR_DisableBkUpAccess();
+#endif
+
+ // Disable LSI and LSE clocks
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ HAL_RCC_OscConfig(&RCC_OscInitStruct);
+#if DEVICE_RTC_LSI
+ rtc_inited = 0;
+#endif
+}
+
+int rtc_isenabled(void)
+{
+#if DEVICE_RTC_LSI
+ return rtc_inited;
+#else
+ if ((RTC->ISR & RTC_ISR_INITS) == RTC_ISR_INITS) return 1;
+ else return 0;
+#endif
+}
+
+/*
+ RTC Registers
+ RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
+ RTC_Month 1=january, 2=february, ..., 12=december
+ RTC_Date day of the month 1-31
+ RTC_Year year 0-99
+ struct tm
+ tm_sec seconds after the minute 0-61
+ tm_min minutes after the hour 0-59
+ tm_hour hours since midnight 0-23
+ tm_mday day of the month 1-31
+ tm_mon months since January 0-11
+ tm_year years since 1900
+ tm_wday days since Sunday 0-6
+ tm_yday days since January 1 0-365
+ tm_isdst Daylight Saving Time flag
+*/
+time_t rtc_read(void)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+ struct tm timeinfo;
+
+ RtcHandle.Instance = RTC;
+
+ // Read actual date and time
+ // Warning: the time must be read first!
+ HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+ HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+
+ // Setup a tm structure based on the RTC
+ timeinfo.tm_wday = dateStruct.WeekDay;
+ timeinfo.tm_mon = dateStruct.Month - 1;
+ timeinfo.tm_mday = dateStruct.Date;
+ timeinfo.tm_year = dateStruct.Year + 68;
+ timeinfo.tm_hour = timeStruct.Hours;
+ timeinfo.tm_min = timeStruct.Minutes;
+ timeinfo.tm_sec = timeStruct.Seconds;
+ // Daylight Saving Time information is not available
+ timeinfo.tm_isdst = -1;
+
+ // Convert to timestamp
+ time_t t = mktime(&timeinfo);
+
+ return t;
+}
+
+void rtc_write(time_t t)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+
+ RtcHandle.Instance = RTC;
+
+ // Convert the time into a tm
+ struct tm *timeinfo = localtime(&t);
+
+ // Fill RTC structures
+ dateStruct.WeekDay = timeinfo->tm_wday;
+ dateStruct.Month = timeinfo->tm_mon + 1;
+ dateStruct.Date = timeinfo->tm_mday;
+ dateStruct.Year = timeinfo->tm_year - 68;
+ timeStruct.Hours = timeinfo->tm_hour;
+ timeStruct.Minutes = timeinfo->tm_min;
+ timeStruct.Seconds = timeinfo->tm_sec;
+ timeStruct.TimeFormat = RTC_HOURFORMAT_24;
+ timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
+ timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
+
+ // Change the RTC current date/time
+ HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+ HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1031 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "mbed_assert.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include <string.h>
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+
+#define UART_NUM (8)
+static uint32_t serial_irq_ids[UART_NUM] = {0};
+static UART_HandleTypeDef uart_handlers[UART_NUM];
+
+static uart_irq_handler irq_handler;
+
+int stdio_uart_inited = 0;
+serial_t stdio_uart;
+
+#if DEVICE_SERIAL_ASYNCH
+ #define SERIAL_S(obj) (&((obj)->serial))
+#else
+ #define SERIAL_S(obj) (obj)
+#endif
+
+
+static void init_uart(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+ huart->Instance = (USART_TypeDef *)(obj_s->uart);
+
+ huart->Init.BaudRate = obj_s->baudrate;
+ huart->Init.WordLength = obj_s->databits;
+ huart->Init.StopBits = obj_s->stopbits;
+ huart->Init.Parity = obj_s->parity;
+#if DEVICE_SERIAL_FC
+ huart->Init.HwFlowCtl = obj_s->hw_flow_ctl;
+#else
+ huart->Init.HwFlowCtl = UART_HWCONTROL_NONE;
+#endif
+ huart->Init.OverSampling = UART_OVERSAMPLING_16;
+ huart->TxXferCount = 0;
+ huart->TxXferSize = 0;
+ huart->RxXferCount = 0;
+ huart->RxXferSize = 0;
+
+ if (obj_s->pin_rx == NC) {
+ huart->Init.Mode = UART_MODE_TX;
+ } else if (obj_s->pin_tx == NC) {
+ huart->Init.Mode = UART_MODE_RX;
+ } else {
+ huart->Init.Mode = UART_MODE_TX_RX;
+ }
+
+ /* uAMR & ARM: Call to UART init is done between reset of pre-initialized variables */
+ /* and before HAL Init. SystemCoreClock init required here */
+ SystemCoreClockUpdate();
+
+ if (HAL_UART_Init(huart) != HAL_OK) {
+ error("Cannot initialize UART\n");
+ }
+}
+
+void serial_init(serial_t *obj, PinName tx, PinName rx)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ // Determine the UART to use (UART_1, UART_2, ...)
+ UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+ UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+
+ // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
+ obj_s->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
+ MBED_ASSERT(obj_s->uart != (UARTName)NC);
+
+ // Enable USART clock
+ switch (obj_s->uart) {
+ case UART_1:
+ __HAL_RCC_USART1_FORCE_RESET();
+ __HAL_RCC_USART1_RELEASE_RESET();
+ __HAL_RCC_USART1_CLK_ENABLE();
+ obj_s->index = 0;
+ break;
+
+ case UART_2:
+ __HAL_RCC_USART2_FORCE_RESET();
+ __HAL_RCC_USART2_RELEASE_RESET();
+ __HAL_RCC_USART2_CLK_ENABLE();
+ obj_s->index = 1;
+ break;
+#if defined(USART3_BASE)
+ case UART_3:
+ __HAL_RCC_USART3_FORCE_RESET();
+ __HAL_RCC_USART3_RELEASE_RESET();
+ __HAL_RCC_USART3_CLK_ENABLE();
+ obj_s->index = 2;
+ break;
+#endif
+#if defined(UART4_BASE)
+ case UART_4:
+ __HAL_RCC_UART4_FORCE_RESET();
+ __HAL_RCC_UART4_RELEASE_RESET();
+ __HAL_RCC_UART4_CLK_ENABLE();
+ obj_s->index = 3;
+ break;
+#endif
+#if defined(UART5_BASE)
+ case UART_5:
+ __HAL_RCC_UART5_FORCE_RESET();
+ __HAL_RCC_UART5_RELEASE_RESET();
+ __HAL_RCC_UART5_CLK_ENABLE();
+ obj_s->index = 4;
+ break;
+#endif
+#if defined(USART6_BASE)
+ case UART_6:
+ __HAL_RCC_USART6_FORCE_RESET();
+ __HAL_RCC_USART6_RELEASE_RESET();
+ __HAL_RCC_USART6_CLK_ENABLE();
+ obj_s->index = 5;
+ break;
+#endif
+#if defined(UART7_BASE)
+ case UART_7:
+ __HAL_RCC_UART7_FORCE_RESET();
+ __HAL_RCC_UART7_RELEASE_RESET();
+ __HAL_RCC_UART7_CLK_ENABLE();
+ obj_s->index = 6;
+ break;
+#endif
+#if defined(UART8_BASE)
+ case UART_8:
+ __HAL_RCC_UART8_FORCE_RESET();
+ __HAL_RCC_UART8_RELEASE_RESET();
+ __HAL_RCC_UART8_CLK_ENABLE();
+ obj_s->index = 7;
+ break;
+#endif
+ }
+
+ // Configure the UART pins
+ pinmap_pinout(tx, PinMap_UART_TX);
+ pinmap_pinout(rx, PinMap_UART_RX);
+
+ if (tx != NC) {
+ pin_mode(tx, PullUp);
+ }
+ if (rx != NC) {
+ pin_mode(rx, PullUp);
+ }
+
+ // Configure UART
+ obj_s->baudrate = 9600;
+ obj_s->databits = UART_WORDLENGTH_8B;
+ obj_s->stopbits = UART_STOPBITS_1;
+ obj_s->parity = UART_PARITY_NONE;
+
+#if DEVICE_SERIAL_FC
+ obj_s->hw_flow_ctl = UART_HWCONTROL_NONE;
+#endif
+
+ obj_s->pin_tx = tx;
+ obj_s->pin_rx = rx;
+
+ init_uart(obj);
+
+ // For stdio management
+ if (obj_s->uart == STDIO_UART) {
+ stdio_uart_inited = 1;
+ memcpy(&stdio_uart, obj, sizeof(serial_t));
+ }
+}
+
+void serial_free(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ // Reset UART and disable clock
+ switch (obj_s->index) {
+ case 0:
+ __USART1_FORCE_RESET();
+ __USART1_RELEASE_RESET();
+ __USART1_CLK_DISABLE();
+ break;
+ case 1:
+ __USART2_FORCE_RESET();
+ __USART2_RELEASE_RESET();
+ __USART2_CLK_DISABLE();
+ break;
+#if defined(USART3_BASE)
+ case 2:
+ __USART3_FORCE_RESET();
+ __USART3_RELEASE_RESET();
+ __USART3_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART4_BASE)
+ case 3:
+ __UART4_FORCE_RESET();
+ __UART4_RELEASE_RESET();
+ __UART4_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART5_BASE)
+ case 4:
+ __UART5_FORCE_RESET();
+ __UART5_RELEASE_RESET();
+ __UART5_CLK_DISABLE();
+ break;
+#endif
+#if defined(USART6_BASE)
+ case 5:
+ __USART6_FORCE_RESET();
+ __USART6_RELEASE_RESET();
+ __USART6_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART7_BASE)
+ case 6:
+ __UART7_FORCE_RESET();
+ __UART7_RELEASE_RESET();
+ __UART7_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART8_BASE)
+ case 7:
+ __UART8_FORCE_RESET();
+ __UART8_RELEASE_RESET();
+ __UART8_CLK_DISABLE();
+ break;
+#endif
+ }
+
+ // Configure GPIOs
+ pin_function(obj_s->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj_s->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+
+ serial_irq_ids[obj_s->index] = 0;
+}
+
+void serial_baud(serial_t *obj, int baudrate)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ obj_s->baudrate = baudrate;
+ init_uart(obj);
+}
+
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ if (data_bits == 9) {
+ obj_s->databits = UART_WORDLENGTH_9B;
+ } else {
+ obj_s->databits = UART_WORDLENGTH_8B;
+ }
+
+ switch (parity) {
+ case ParityOdd:
+ obj_s->parity = UART_PARITY_ODD;
+ break;
+ case ParityEven:
+ obj_s->parity = UART_PARITY_EVEN;
+ break;
+ default: // ParityNone
+ case ParityForced0: // unsupported!
+ case ParityForced1: // unsupported!
+ obj_s->parity = UART_PARITY_NONE;
+ break;
+ }
+
+ if (stop_bits == 2) {
+ obj_s->stopbits = UART_STOPBITS_2;
+ } else {
+ obj_s->stopbits = UART_STOPBITS_1;
+ }
+
+ init_uart(obj);
+}
+
+/******************************************************************************
+ * INTERRUPTS HANDLING
+ ******************************************************************************/
+
+static void uart_irq(int id)
+{
+ UART_HandleTypeDef * huart = &uart_handlers[id];
+
+ if (serial_irq_ids[id] != 0) {
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_TC) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC) != RESET) {
+ irq_handler(serial_irq_ids[id], TxIrq);
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
+ }
+ }
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE) != RESET) {
+ irq_handler(serial_irq_ids[id], RxIrq);
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_RXNE);
+ }
+ }
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear ORE flag
+ }
+ }
+ }
+}
+
+static void uart1_irq(void)
+{
+ uart_irq(0);
+}
+
+static void uart2_irq(void)
+{
+ uart_irq(1);
+}
+
+#if defined(USART3_BASE)
+static void uart3_irq(void)
+{
+ uart_irq(2);
+}
+#endif
+
+#if defined(UART4_BASE)
+static void uart4_irq(void)
+{
+ uart_irq(3);
+}
+#endif
+
+#if defined(UART5_BASE)
+static void uart5_irq(void)
+{
+ uart_irq(4);
+}
+#endif
+
+#if defined(USART6_BASE)
+static void uart6_irq(void)
+{
+ uart_irq(5);
+}
+#endif
+
+#if defined(UART7_BASE)
+static void uart7_irq(void)
+{
+ uart_irq(6);
+}
+#endif
+
+#if defined(UART8_BASE)
+static void uart8_irq(void)
+{
+ uart_irq(7);
+}
+#endif
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ irq_handler = handler;
+ serial_irq_ids[obj_s->index] = id;
+}
+
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+
+ switch (obj_s->index) {
+ case 0:
+ irq_n = USART1_IRQn;
+ vector = (uint32_t)&uart1_irq;
+ break;
+
+ case 1:
+ irq_n = USART2_IRQn;
+ vector = (uint32_t)&uart2_irq;
+ break;
+#if defined(USART3_BASE)
+ case 2:
+ irq_n = USART3_IRQn;
+ vector = (uint32_t)&uart3_irq;
+ break;
+#endif
+#if defined(UART4_BASE)
+ case 3:
+ irq_n = UART4_IRQn;
+ vector = (uint32_t)&uart4_irq;
+ break;
+#endif
+#if defined(UART5_BASE)
+ case 4:
+ irq_n = UART5_IRQn;
+ vector = (uint32_t)&uart5_irq;
+ break;
+#endif
+#if defined(USART6_BASE)
+ case 5:
+ irq_n = USART6_IRQn;
+ vector = (uint32_t)&uart6_irq;
+ break;
+#endif
+#if defined(UART7_BASE)
+ case 6:
+ irq_n = UART7_IRQn;
+ vector = (uint32_t)&uart7_irq;
+ break;
+#endif
+#if defined(UART8_BASE)
+ case 7:
+ irq_n = UART8_IRQn;
+ vector = (uint32_t)&uart8_irq;
+ break;
+#endif
+ }
+
+ if (enable) {
+ if (irq == RxIrq) {
+ __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
+ } else { // TxIrq
+ __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
+ }
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+
+ } else { // disable
+ int all_disabled = 0;
+ if (irq == RxIrq) {
+ __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+ // Check if TxIrq is disabled too
+ if ((huart->Instance->CR1 & USART_CR1_TXEIE) == 0) {
+ all_disabled = 1;
+ }
+ } else { // TxIrq
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
+ // Check if RxIrq is disabled too
+ if ((huart->Instance->CR1 & USART_CR1_RXNEIE) == 0) {
+ all_disabled = 1;
+ }
+ }
+
+ if (all_disabled) {
+ NVIC_DisableIRQ(irq_n);
+ }
+ }
+}
+
+/******************************************************************************
+ * READ/WRITE
+ ******************************************************************************/
+
+int serial_getc(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ while (!serial_readable(obj));
+ return (int)(huart->Instance->DR & 0x1FF);
+}
+
+void serial_putc(serial_t *obj, int c)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ while (!serial_writable(obj));
+ huart->Instance->DR = (uint32_t)(c & 0x1FF);
+}
+
+int serial_readable(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ // Check if data is received
+ return (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE) != RESET) ? 1 : 0;
+}
+
+int serial_writable(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ // Check if data is transmitted
+ return (__HAL_UART_GET_FLAG(huart, UART_FLAG_TXE) != RESET) ? 1 : 0;
+}
+
+void serial_clear(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ huart->TxXferCount = 0;
+ huart->RxXferCount = 0;
+}
+
+void serial_pinout_tx(PinName tx)
+{
+ pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+void serial_break_set(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ HAL_LIN_SendBreak(huart);
+}
+
+void serial_break_clear(serial_t *obj)
+{
+ (void)obj;
+}
+
+#if DEVICE_SERIAL_ASYNCH
+
+/******************************************************************************
+ * LOCAL HELPER FUNCTIONS
+ ******************************************************************************/
+
+/**
+ * Configure the TX buffer for an asynchronous write serial transaction
+ *
+ * @param obj The serial object.
+ * @param tx The buffer for sending.
+ * @param tx_length The number of words to transmit.
+ */
+static void serial_tx_buffer_set(serial_t *obj, void *tx, int tx_length, uint8_t width)
+{
+ (void)width;
+
+ // Exit if a transmit is already on-going
+ if (serial_tx_active(obj)) {
+ return;
+ }
+
+ obj->tx_buff.buffer = tx;
+ obj->tx_buff.length = tx_length;
+ obj->tx_buff.pos = 0;
+}
+
+/**
+ * Configure the RX buffer for an asynchronous write serial transaction
+ *
+ * @param obj The serial object.
+ * @param tx The buffer for sending.
+ * @param tx_length The number of words to transmit.
+ */
+static void serial_rx_buffer_set(serial_t *obj, void *rx, int rx_length, uint8_t width)
+{
+ (void)width;
+
+ // Exit if a reception is already on-going
+ if (serial_rx_active(obj)) {
+ return;
+ }
+
+ obj->rx_buff.buffer = rx;
+ obj->rx_buff.length = rx_length;
+ obj->rx_buff.pos = 0;
+}
+
+/**
+ * Configure events
+ *
+ * @param obj The serial object
+ * @param event The logical OR of the events to configure
+ * @param enable Set to non-zero to enable events, or zero to disable them
+ */
+static void serial_enable_event(serial_t *obj, int event, uint8_t enable)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ // Shouldn't have to enable interrupt here, just need to keep track of the requested events.
+ if (enable) {
+ obj_s->events |= event;
+ } else {
+ obj_s->events &= ~event;
+ }
+}
+
+
+/**
+* Get index of serial object TX IRQ, relating it to the physical peripheral.
+*
+* @param obj pointer to serial object
+* @return internal NVIC TX IRQ index of U(S)ART peripheral
+*/
+static IRQn_Type serial_get_irq_n(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ IRQn_Type irq_n;
+
+ switch (obj_s->index) {
+#if defined(USART1_BASE)
+ case 0:
+ irq_n = USART1_IRQn;
+ break;
+#endif
+#if defined(USART2_BASE)
+ case 1:
+ irq_n = USART2_IRQn;
+ break;
+#endif
+#if defined(USART3_BASE)
+ case 2:
+ irq_n = USART3_IRQn;
+ break;
+#endif
+#if defined(UART4_BASE)
+ case 3:
+ irq_n = UART4_IRQn;
+ break;
+#endif
+#if defined(USART5_BASE)
+ case 4:
+ irq_n = UART5_IRQn;
+ break;
+#endif
+#if defined(USART6_BASE)
+ case 5:
+ irq_n = USART6_IRQn;
+ break;
+#endif
+#if defined(UART7_BASE)
+ case 6:
+ irq_n = UART7_IRQn;
+ break;
+#endif
+#if defined(UART8_BASE)
+ case 7:
+ irq_n = UART8_IRQn;
+ break;
+#endif
+ default:
+ irq_n = (IRQn_Type)0;
+ }
+
+ return irq_n;
+}
+
+/******************************************************************************
+ * MBED API FUNCTIONS
+ ******************************************************************************/
+
+/**
+ * Begin asynchronous TX transfer. The used buffer is specified in the serial
+ * object, tx_buff
+ *
+ * @param obj The serial object
+ * @param tx The buffer for sending
+ * @param tx_length The number of words to transmit
+ * @param tx_width The bit width of buffer word
+ * @param handler The serial handler
+ * @param event The logical OR of events to be registered
+ * @param hint A suggestion for how to use DMA with this transfer
+ * @return Returns number of data transfered, or 0 otherwise
+ */
+int serial_tx_asynch(serial_t *obj, const void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint)
+{
+ // TODO: DMA usage is currently ignored
+ (void) hint;
+
+ // Check buffer is ok
+ MBED_ASSERT(tx != (void*)0);
+ MBED_ASSERT(tx_width == 8); // support only 8b width
+
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef * huart = &uart_handlers[obj_s->index];
+
+ if (tx_length == 0) {
+ return 0;
+ }
+
+ // Set up buffer
+ serial_tx_buffer_set(obj, (void *)tx, tx_length, tx_width);
+
+ // Set up events
+ serial_enable_event(obj, SERIAL_EVENT_TX_ALL, 0); // Clear all events
+ serial_enable_event(obj, event, 1); // Set only the wanted events
+
+ // Enable interrupt
+ IRQn_Type irq_n = serial_get_irq_n(obj);
+ NVIC_ClearPendingIRQ(irq_n);
+ NVIC_DisableIRQ(irq_n);
+ NVIC_SetPriority(irq_n, 1);
+ NVIC_SetVector(irq_n, (uint32_t)handler);
+ NVIC_EnableIRQ(irq_n);
+
+ // the following function will enable UART_IT_TXE and error interrupts
+ if (HAL_UART_Transmit_IT(huart, (uint8_t*)tx, tx_length) != HAL_OK) {
+ return 0;
+ }
+
+ return tx_length;
+}
+
+/**
+ * Begin asynchronous RX transfer (enable interrupt for data collecting)
+ * The used buffer is specified in the serial object, rx_buff
+ *
+ * @param obj The serial object
+ * @param rx The buffer for sending
+ * @param rx_length The number of words to transmit
+ * @param rx_width The bit width of buffer word
+ * @param handler The serial handler
+ * @param event The logical OR of events to be registered
+ * @param handler The serial handler
+ * @param char_match A character in range 0-254 to be matched
+ * @param hint A suggestion for how to use DMA with this transfer
+ */
+void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint)
+{
+ // TODO: DMA usage is currently ignored
+ (void) hint;
+
+ /* Sanity check arguments */
+ MBED_ASSERT(obj);
+ MBED_ASSERT(rx != (void*)0);
+ MBED_ASSERT(rx_width == 8); // support only 8b width
+
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ serial_enable_event(obj, SERIAL_EVENT_RX_ALL, 0);
+ serial_enable_event(obj, event, 1);
+
+ // set CharMatch
+ obj->char_match = char_match;
+
+ serial_rx_buffer_set(obj, rx, rx_length, rx_width);
+
+ IRQn_Type irq_n = serial_get_irq_n(obj);
+ NVIC_ClearPendingIRQ(irq_n);
+ NVIC_DisableIRQ(irq_n);
+ NVIC_SetPriority(irq_n, 0);
+ NVIC_SetVector(irq_n, (uint32_t)handler);
+ NVIC_EnableIRQ(irq_n);
+
+ // following HAL function will enable the RXNE interrupt + error interrupts
+ HAL_UART_Receive_IT(huart, (uint8_t*)rx, rx_length);
+}
+
+/**
+ * Attempts to determine if the serial peripheral is already in use for TX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the TX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_tx_active(serial_t *obj)
+{
+ MBED_ASSERT(obj);
+
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ return ((HAL_UART_GetState(huart) == HAL_UART_STATE_BUSY_TX) ? 1 : 0);
+}
+
+/**
+ * Attempts to determine if the serial peripheral is already in use for RX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the RX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_rx_active(serial_t *obj)
+{
+ MBED_ASSERT(obj);
+
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ return ((HAL_UART_GetState(huart) == HAL_UART_STATE_BUSY_RX) ? 1 : 0);
+}
+
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) {
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_TC) != RESET) {
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
+ }
+}
+
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) {
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_PE) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear PE flag
+ } else if (__HAL_UART_GET_FLAG(huart, UART_FLAG_FE) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear FE flag
+ } else if (__HAL_UART_GET_FLAG(huart, UART_FLAG_NE) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear NE flag
+ } else if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear ORE flag
+ }
+}
+
+/**
+ * The asynchronous TX and RX handler.
+ *
+ * @param obj The serial object
+ * @return Returns event flags if a TX/RX transfer termination condition was met or 0 otherwise
+ */
+int serial_irq_handler_asynch(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ volatile int return_event = 0;
+ uint8_t *buf = (uint8_t*)(obj->rx_buff.buffer);
+ uint8_t i = 0;
+
+ // TX PART:
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_TC) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC) != RESET) {
+ // Return event SERIAL_EVENT_TX_COMPLETE if requested
+ if ((obj_s->events & SERIAL_EVENT_TX_COMPLETE ) != 0) {
+ return_event |= (SERIAL_EVENT_TX_COMPLETE & obj_s->events);
+ }
+ }
+ }
+
+ // Handle error events
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_PE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
+ return_event |= (SERIAL_EVENT_RX_PARITY_ERROR & obj_s->events);
+ }
+ }
+
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_FE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
+ return_event |= (SERIAL_EVENT_RX_FRAMING_ERROR & obj_s->events);
+ }
+ }
+
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
+ return_event |= (SERIAL_EVENT_RX_OVERRUN_ERROR & obj_s->events);
+ }
+ }
+
+ HAL_UART_IRQHandler(huart);
+
+ // Abort if an error occurs
+ if (return_event & SERIAL_EVENT_RX_PARITY_ERROR ||
+ return_event & SERIAL_EVENT_RX_FRAMING_ERROR ||
+ return_event & SERIAL_EVENT_RX_OVERRUN_ERROR) {
+ return return_event;
+ }
+
+ //RX PART
+ if (huart->RxXferSize != 0) {
+ obj->rx_buff.pos = huart->RxXferSize - huart->RxXferCount;
+ }
+ if ((huart->RxXferCount == 0) && (obj->rx_buff.pos >= (obj->rx_buff.length - 1))) {
+ return_event |= (SERIAL_EVENT_RX_COMPLETE & obj_s->events);
+ }
+
+ // Check if char_match is present
+ if (obj_s->events & SERIAL_EVENT_RX_CHARACTER_MATCH) {
+ if (buf != NULL) {
+ for (i = 0; i < obj->rx_buff.pos; i++) {
+ if (buf[i] == obj->char_match) {
+ obj->rx_buff.pos = i;
+ return_event |= (SERIAL_EVENT_RX_CHARACTER_MATCH & obj_s->events);
+ serial_rx_abort_asynch(obj);
+ break;
+ }
+ }
+ }
+ }
+
+ return return_event;
+}
+
+/**
+ * Abort the ongoing TX transaction. It disables the enabled interupt for TX and
+ * flush TX hardware buffer if TX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_tx_abort_asynch(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+
+ // clear flags
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
+
+ // reset states
+ huart->TxXferCount = 0;
+ // update handle state
+ if(huart->gState == HAL_UART_STATE_BUSY_TX_RX) {
+ huart->gState = HAL_UART_STATE_BUSY_RX;
+ } else {
+ huart->gState = HAL_UART_STATE_READY;
+ }
+}
+
+/**
+ * Abort the ongoing RX transaction It disables the enabled interrupt for RX and
+ * flush RX hardware buffer if RX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_rx_abort_asynch(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ // disable interrupts
+ __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+ // clear flags
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_RXNE);
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear errors flag
+
+ // reset states
+ huart->RxXferCount = 0;
+ // update handle state
+ if(huart->RxState == HAL_UART_STATE_BUSY_TX_RX) {
+ huart->RxState = HAL_UART_STATE_BUSY_TX;
+ } else {
+ huart->RxState = HAL_UART_STATE_READY;
+ }
+}
+
+#endif
+
+#if DEVICE_SERIAL_FC
+
+/**
+ * Set HW Control Flow
+ * @param obj The serial object
+ * @param type The Control Flow type (FlowControlNone, FlowControlRTS, FlowControlCTS, FlowControlRTSCTS)
+ * @param rxflow Pin for the rxflow
+ * @param txflow Pin for the txflow
+ */
+void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ // Determine the UART to use (UART_1, UART_2, ...)
+ UARTName uart_rts = (UARTName)pinmap_peripheral(rxflow, PinMap_UART_RTS);
+ UARTName uart_cts = (UARTName)pinmap_peripheral(txflow, PinMap_UART_CTS);
+
+ // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
+ obj_s->uart = (UARTName)pinmap_merge(uart_cts, uart_rts);
+ MBED_ASSERT(obj_s->uart != (UARTName)NC);
+
+ if(type == FlowControlNone) {
+ // Disable hardware flow control
+ obj_s->hw_flow_ctl = UART_HWCONTROL_NONE;
+ }
+ if (type == FlowControlRTS) {
+ // Enable RTS
+ MBED_ASSERT(uart_rts != (UARTName)NC);
+ obj_s->hw_flow_ctl = UART_HWCONTROL_RTS;
+ obj_s->pin_rts = rxflow;
+ // Enable the pin for RTS function
+ pinmap_pinout(rxflow, PinMap_UART_RTS);
+ }
+ if (type == FlowControlCTS) {
+ // Enable CTS
+ MBED_ASSERT(uart_cts != (UARTName)NC);
+ obj_s->hw_flow_ctl = UART_HWCONTROL_CTS;
+ obj_s->pin_cts = txflow;
+ // Enable the pin for CTS function
+ pinmap_pinout(txflow, PinMap_UART_CTS);
+ }
+ if (type == FlowControlRTSCTS) {
+ // Enable CTS & RTS
+ MBED_ASSERT(uart_rts != (UARTName)NC);
+ MBED_ASSERT(uart_cts != (UARTName)NC);
+ obj_s->hw_flow_ctl = UART_HWCONTROL_RTS_CTS;
+ obj_s->pin_rts = rxflow;
+ obj_s->pin_cts = txflow;
+ // Enable the pin for CTS function
+ pinmap_pinout(txflow, PinMap_UART_CTS);
+ // Enable the pin for RTS function
+ pinmap_pinout(rxflow, PinMap_UART_RTS);
+ }
+
+ init_uart(obj);
+}
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "sleep_api.h"
+#if DEVICE_SLEEP
+
+#include "cmsis.h"
+
+
+void sleep(void) {
+ // Stop HAL systick
+ HAL_SuspendTick();
+ // Request to enter SLEEP mode
+ HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+ // Restart HAL systick
+ HAL_ResumeTick();
+}
+
+void deepsleep(void)
+{
+ // Request to enter STOP mode with regulator in low power mode
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+
+ // After wake-up from STOP reconfigure the PLL
+ SetSysClock();
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,356 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "mbed_error.h"
+#include "spi_api.h"
+
+#if DEVICE_SPI
+
+#include <math.h>
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+
+static SPI_HandleTypeDef SpiHandle;
+
+static void init_spi(spi_t *obj)
+{
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+
+ __HAL_SPI_DISABLE(&SpiHandle);
+
+ SpiHandle.Init.Mode = obj->mode;
+ SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
+ SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
+ SpiHandle.Init.CLKPhase = obj->cpha;
+ SpiHandle.Init.CLKPolarity = obj->cpol;
+ SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
+ SpiHandle.Init.CRCPolynomial = 7;
+ SpiHandle.Init.DataSize = obj->bits;
+ SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ SpiHandle.Init.NSS = obj->nss;
+ SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
+
+ if (HAL_SPI_Init(&SpiHandle) != HAL_OK) {
+ error("Cannot initialize SPI");
+ }
+
+ __HAL_SPI_ENABLE(&SpiHandle);
+}
+
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
+{
+ // Determine the SPI to use
+ SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+ SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
+ SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+ SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+
+ SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
+ SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
+
+ obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
+ MBED_ASSERT(obj->spi != (SPIName)NC);
+
+ // Enable SPI clock
+ if (obj->spi == SPI_1) {
+ __HAL_RCC_SPI1_CLK_ENABLE();
+ }
+
+ if (obj->spi == SPI_2) {
+ __HAL_RCC_SPI2_CLK_ENABLE();
+ }
+
+#if defined SPI3_BASE
+ if (obj->spi == SPI_3) {
+ __HAL_RCC_SPI3_CLK_ENABLE();
+ }
+#endif
+
+#if defined SPI4_BASE
+ if (obj->spi == SPI_4) {
+ __HAL_RCC_SPI4_CLK_ENABLE();
+ }
+#endif
+
+#if defined SPI5_BASE
+ if (obj->spi == SPI_5) {
+ __HAL_RCC_SPI5_CLK_ENABLE();
+ }
+#endif
+
+#if defined SPI6_BASE
+ if (obj->spi == SPI_6) {
+ __HAL_RCC_SPI6_CLK_ENABLE();
+ }
+#endif
+
+ // Configure the SPI pins
+ pinmap_pinout(mosi, PinMap_SPI_MOSI);
+ pinmap_pinout(miso, PinMap_SPI_MISO);
+ pinmap_pinout(sclk, PinMap_SPI_SCLK);
+
+ // Save new values
+ obj->bits = SPI_DATASIZE_8BIT;
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_1EDGE;
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256;
+
+ obj->pin_miso = miso;
+ obj->pin_mosi = mosi;
+ obj->pin_sclk = sclk;
+ obj->pin_ssel = ssel;
+
+ if (ssel != NC) {
+ pinmap_pinout(ssel, PinMap_SPI_SSEL);
+ } else {
+ obj->nss = SPI_NSS_SOFT;
+ }
+
+ init_spi(obj);
+}
+
+void spi_free(spi_t *obj)
+{
+ // Reset SPI and disable clock
+ if (obj->spi == SPI_1) {
+ __HAL_RCC_SPI1_FORCE_RESET();
+ __HAL_RCC_SPI1_RELEASE_RESET();
+ __HAL_RCC_SPI1_CLK_DISABLE();
+ }
+
+ if (obj->spi == SPI_2) {
+ __HAL_RCC_SPI2_FORCE_RESET();
+ __HAL_RCC_SPI2_RELEASE_RESET();
+ __HAL_RCC_SPI2_CLK_DISABLE();
+ }
+#if defined SPI3_BASE
+ if (obj->spi == SPI_3) {
+ __HAL_RCC_SPI3_FORCE_RESET();
+ __HAL_RCC_SPI3_RELEASE_RESET();
+ __HAL_RCC_SPI3_CLK_DISABLE();
+ }
+#endif
+
+#if defined SPI4_BASE
+ if (obj->spi == SPI_4) {
+ __HAL_RCC_SPI4_FORCE_RESET();
+ __HAL_RCC_SPI4_RELEASE_RESET();
+ __HAL_RCC_SPI4_CLK_DISABLE();
+ }
+#endif
+
+#if defined SPI5_BASE
+ if (obj->spi == SPI_5) {
+ __HAL_RCC_SPI5_FORCE_RESET();
+ __HAL_RCC_SPI5_RELEASE_RESET();
+ __HAL_RCC_SPI5_CLK_DISABLE();
+ }
+#endif
+
+#if defined SPI6_BASE
+ if (obj->spi == SPI_6) {
+ __HAL_RCC_SPI6_FORCE_RESET();
+ __HAL_RCC_SPI6_RELEASE_RESET();
+ __HAL_RCC_SPI6_CLK_DISABLE();
+ }
+#endif
+
+ // Configure GPIOs
+ pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void spi_format(spi_t *obj, int bits, int mode, int slave)
+{
+ // Save new values
+ if (bits == 16) {
+ obj->bits = SPI_DATASIZE_16BIT;
+ } else {
+ obj->bits = SPI_DATASIZE_8BIT;
+ }
+
+ switch (mode) {
+ case 0:
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_1EDGE;
+ break;
+ case 1:
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_2EDGE;
+ break;
+ case 2:
+ obj->cpol = SPI_POLARITY_HIGH;
+ obj->cpha = SPI_PHASE_1EDGE;
+ break;
+ default:
+ obj->cpol = SPI_POLARITY_HIGH;
+ obj->cpha = SPI_PHASE_2EDGE;
+ break;
+ }
+
+ if (obj->nss != SPI_NSS_SOFT) {
+ obj->nss = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
+ }
+
+ obj->mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
+
+ init_spi(obj);
+}
+
+static const uint16_t baudrate_prescaler_table[] = {SPI_BAUDRATEPRESCALER_2,
+ SPI_BAUDRATEPRESCALER_4,
+ SPI_BAUDRATEPRESCALER_8,
+ SPI_BAUDRATEPRESCALER_16,
+ SPI_BAUDRATEPRESCALER_32,
+ SPI_BAUDRATEPRESCALER_64,
+ SPI_BAUDRATEPRESCALER_128,
+ SPI_BAUDRATEPRESCALER_256};
+
+void spi_frequency(spi_t *obj, int hz)
+{
+ int spi_hz = 0;
+ uint8_t prescaler_rank = 0;
+
+ /* Get source clock depending on SPI instance */
+ switch ((int)obj->spi) {
+ case SPI_1:
+#if defined SPI4_BASE
+ case SPI_4:
+#endif
+#if defined SPI5_BASE
+ case SPI_5:
+#endif
+#if defined SPI6_BASE
+ case SPI_6:
+#endif
+ /* SPI_1, SPI_4, SPI_5 and SPI_6. Source CLK is PCKL2 */
+ spi_hz = HAL_RCC_GetPCLK2Freq();
+ break;
+ case SPI_2:
+#if defined SPI3_BASE
+ case SPI_3:
+#endif
+ /* SPI_2 and SPI_3. Source CLK is PCKL1 */
+ spi_hz = HAL_RCC_GetPCLK1Freq();
+ break;
+ default:
+ error("SPI instance not set");
+ }
+
+ /* Define pre-scaler in order to get highest available frequency below requested frequency */
+ while ((spi_hz > hz) && (prescaler_rank < sizeof(baudrate_prescaler_table)/sizeof(baudrate_prescaler_table[0]))){
+ spi_hz = spi_hz / 2;
+ prescaler_rank++;
+ }
+
+ if (prescaler_rank <= sizeof(baudrate_prescaler_table)/sizeof(baudrate_prescaler_table[0])) {
+ obj->br_presc = baudrate_prescaler_table[prescaler_rank-1];
+ } else {
+ error("Couldn't setup requested SPI frequency");
+ }
+
+ init_spi(obj);
+}
+
+static inline int ssp_readable(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ // Check if data is received
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
+ return status;
+}
+
+static inline int ssp_writeable(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ // Check if data is transmitted
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
+ return status;
+}
+
+static inline void ssp_write(spi_t *obj, int value)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_writeable(obj));
+ spi->DR = (uint16_t)value;
+}
+
+static inline int ssp_read(spi_t *obj)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_readable(obj));
+ return (int)spi->DR;
+}
+
+static inline int ssp_busy(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
+ return status;
+}
+
+int spi_master_write(spi_t *obj, int value)
+{
+ ssp_write(obj, value);
+ return ssp_read(obj);
+}
+
+int spi_slave_receive(spi_t *obj)
+{
+ return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
+};
+
+int spi_slave_read(spi_t *obj)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_readable(obj));
+ return (int)spi->DR;
+}
+
+void spi_slave_write(spi_t *obj, int value)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_writeable(obj));
+ spi->DR = (uint16_t)value;
+}
+
+int spi_busy(spi_t *obj)
+{
+ return ssp_busy(obj);
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <stddef.h>
+#include "us_ticker_api.h"
+#include "PeripheralNames.h"
+
+#ifdef TARGET_STM32F469
+#define TIM_MST TIM2
+#else
+#define TIM_MST TIM5
+#endif
+
+static TIM_HandleTypeDef TimMasterHandle;
+static int us_ticker_inited = 0;
+
+void us_ticker_init(void)
+{
+ if (us_ticker_inited) return;
+ us_ticker_inited = 1;
+
+ TimMasterHandle.Instance = TIM_MST;
+
+ HAL_InitTick(0); // The passed value is not used
+}
+
+uint32_t us_ticker_read()
+{
+ if (!us_ticker_inited) us_ticker_init();
+ return TIM_MST->CNT;
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp)
+{
+ // Set new output compare value
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
+ // Enable IT
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_disable_interrupt(void)
+{
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_clear_interrupt(void)
+{
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+}
diff -r 000000000000 -r c76361bd82e8 src/mbed_config.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/mbed_config.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,8 @@ +// Automatically generated configuration file. +// DO NOT EDIT, content will be overwritten. + +#ifndef __MBED_CONFIG_DATA__ +#define __MBED_CONFIG_DATA__ + + +#endif
diff -r 000000000000 -r c76361bd82e8 src/pgw.map
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/pgw.map Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,6959 @@
+Component: ARM Compiler 5.06 update 3 (build 300) Tool: armlink [4d35c9]
+
+==============================================================================
+
+Section Cross References
+
+ cmsis_nvic.o(i.__NVIC_SetVector) refers to rt_memcpy_w.o(.text) for __aeabi_memcpy4
+ hal_tick.o(i.HAL_InitTick) refers to system_stm32f4xx.o(i.SystemCoreClockUpdate) for SystemCoreClockUpdate
+ hal_tick.o(i.HAL_InitTick) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Init) for HAL_TIM_OC_Init
+ hal_tick.o(i.HAL_InitTick) refers to cmsis_nvic.o(i.__NVIC_SetVector) for __NVIC_SetVector
+ hal_tick.o(i.HAL_InitTick) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Start) for HAL_TIM_OC_Start
+ hal_tick.o(i.HAL_InitTick) refers to hal_tick.o(.bss) for .bss
+ hal_tick.o(i.HAL_InitTick) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ hal_tick.o(i.HAL_InitTick) refers to hal_tick.o(i.timer_irq_handler) for timer_irq_handler
+ hal_tick.o(i.HAL_InitTick) refers to hal_tick.o(.data) for .data
+ hal_tick.o(i.HAL_ResumeTick) refers to hal_tick.o(.bss) for .bss
+ hal_tick.o(i.HAL_SuspendTick) refers to hal_tick.o(.bss) for .bss
+ hal_tick.o(i.timer_irq_handler) refers to mbed_us_ticker_api.o(i.us_ticker_irq_handler) for us_ticker_irq_handler
+ hal_tick.o(i.timer_irq_handler) refers to stm32f4xx_hal.o(i.HAL_IncTick) for HAL_IncTick
+ hal_tick.o(i.timer_irq_handler) refers to hal_tick.o(.bss) for .bss
+ hal_tick.o(i.timer_irq_handler) refers to hal_tick.o(.data) for .data
+ system_stm32f4xx.o(i.SetSysClock) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_OscConfig) for HAL_RCC_OscConfig
+ system_stm32f4xx.o(i.SetSysClock) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_ClockConfig) for HAL_RCC_ClockConfig
+ system_stm32f4xx.o(i.SetSysClock_PLL_HSI) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_OscConfig) for HAL_RCC_OscConfig
+ system_stm32f4xx.o(i.SetSysClock_PLL_HSI) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_ClockConfig) for HAL_RCC_ClockConfig
+ system_stm32f4xx.o(i.SystemCoreClockUpdate) refers to system_stm32f4xx.o(.data) for .data
+ system_stm32f4xx.o(i.SystemCoreClockUpdate) refers to system_stm32f4xx.o(.constdata) for .constdata
+ system_stm32f4xx.o(i.SystemInit) refers to stm32f4xx_hal.o(i.HAL_Init) for HAL_Init
+ system_stm32f4xx.o(i.SystemInit) refers to system_stm32f4xx.o(i.SetSysClock) for SetSysClock
+ system_stm32f4xx.o(i.SystemInit) refers to system_stm32f4xx.o(.data) for .data
+ analogin_api.o(i.adc_read) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_ConfigChannel) for HAL_ADC_ConfigChannel
+ analogin_api.o(i.adc_read) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_Start) for HAL_ADC_Start
+ analogin_api.o(i.adc_read) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_PollForConversion) for HAL_ADC_PollForConversion
+ analogin_api.o(i.adc_read) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_GetValue) for HAL_ADC_GetValue
+ analogin_api.o(i.adc_read) refers to analogin_api.o(.bss) for .bss
+ analogin_api.o(i.analogin_init) refers to mbed_pinmap_common.o(i.pinmap_peripheral) for pinmap_peripheral
+ analogin_api.o(i.analogin_init) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ analogin_api.o(i.analogin_init) refers to mbed_pinmap_common.o(i.pinmap_function) for pinmap_function
+ analogin_api.o(i.analogin_init) refers to mbed_pinmap_common.o(i.pinmap_pinout) for pinmap_pinout
+ analogin_api.o(i.analogin_init) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_Init) for HAL_ADC_Init
+ analogin_api.o(i.analogin_init) refers to mbed_error.o(i.error) for error
+ analogin_api.o(i.analogin_init) refers to peripheralpins.o(.constdata) for PinMap_ADC
+ analogin_api.o(i.analogin_init) refers to analogin_api.o(.data) for .data
+ analogin_api.o(i.analogin_init) refers to analogin_api.o(.bss) for .bss
+ analogin_api.o(i.analogin_read) refers to analogin_api.o(i.adc_read) for adc_read
+ analogin_api.o(i.analogin_read_u16) refers to analogin_api.o(i.adc_read) for adc_read
+ gpio_api.o(i.gpio_dir) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ gpio_api.o(i.gpio_dir) refers to pinmap.o(i.pin_function) for pin_function
+ gpio_api.o(i.gpio_init) refers to pinmap.o(i.Set_GPIO_Clock) for Set_GPIO_Clock
+ gpio_api.o(i.gpio_init) refers to pinmap.o(i.pin_function) for pin_function
+ gpio_api.o(i.gpio_mode) refers to pinmap.o(i.pin_mode) for pin_mode
+ gpio_api.o(i.gpio_set) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ gpio_api.o(i.gpio_set) refers to pinmap.o(i.pin_function) for pin_function
+ gpio_irq_api.o(i.gpio_irq0) refers to gpio_irq_api.o(i.handle_interrupt_in) for handle_interrupt_in
+ gpio_irq_api.o(i.gpio_irq1) refers to gpio_irq_api.o(i.handle_interrupt_in) for handle_interrupt_in
+ gpio_irq_api.o(i.gpio_irq2) refers to gpio_irq_api.o(i.handle_interrupt_in) for handle_interrupt_in
+ gpio_irq_api.o(i.gpio_irq3) refers to gpio_irq_api.o(i.handle_interrupt_in) for handle_interrupt_in
+ gpio_irq_api.o(i.gpio_irq4) refers to gpio_irq_api.o(i.handle_interrupt_in) for handle_interrupt_in
+ gpio_irq_api.o(i.gpio_irq5) refers to gpio_irq_api.o(i.handle_interrupt_in) for handle_interrupt_in
+ gpio_irq_api.o(i.gpio_irq6) refers to gpio_irq_api.o(i.handle_interrupt_in) for handle_interrupt_in
+ gpio_irq_api.o(i.gpio_irq_free) refers to pinmap.o(i.pin_function) for pin_function
+ gpio_irq_api.o(i.gpio_irq_free) refers to gpio_irq_api.o(.bss) for .bss
+ gpio_irq_api.o(i.gpio_irq_free) refers to gpio_irq_api.o(.data) for .data
+ gpio_irq_api.o(i.gpio_irq_init) refers to pinmap.o(i.Set_GPIO_Clock) for Set_GPIO_Clock
+ gpio_irq_api.o(i.gpio_irq_init) refers to pinmap.o(i.pin_function) for pin_function
+ gpio_irq_api.o(i.gpio_irq_init) refers to cmsis_nvic.o(i.__NVIC_SetVector) for __NVIC_SetVector
+ gpio_irq_api.o(i.gpio_irq_init) refers to mbed_error.o(i.error) for error
+ gpio_irq_api.o(i.gpio_irq_init) refers to gpio_irq_api.o(i.gpio_irq0) for gpio_irq0
+ gpio_irq_api.o(i.gpio_irq_init) refers to gpio_irq_api.o(i.gpio_irq1) for gpio_irq1
+ gpio_irq_api.o(i.gpio_irq_init) refers to gpio_irq_api.o(i.gpio_irq2) for gpio_irq2
+ gpio_irq_api.o(i.gpio_irq_init) refers to gpio_irq_api.o(i.gpio_irq3) for gpio_irq3
+ gpio_irq_api.o(i.gpio_irq_init) refers to gpio_irq_api.o(i.gpio_irq4) for gpio_irq4
+ gpio_irq_api.o(i.gpio_irq_init) refers to gpio_irq_api.o(i.gpio_irq5) for gpio_irq5
+ gpio_irq_api.o(i.gpio_irq_init) refers to gpio_irq_api.o(i.gpio_irq6) for gpio_irq6
+ gpio_irq_api.o(i.gpio_irq_init) refers to gpio_irq_api.o(.bss) for .bss
+ gpio_irq_api.o(i.gpio_irq_init) refers to gpio_irq_api.o(.data) for .data
+ gpio_irq_api.o(i.gpio_irq_set) refers to pinmap.o(i.pin_function) for pin_function
+ gpio_irq_api.o(i.handle_interrupt_in) refers to gpio_irq_api.o(.bss) for .bss
+ gpio_irq_api.o(i.handle_interrupt_in) refers to gpio_irq_api.o(.data) for .data
+ i2c_api.o(i.i2c_byte_read) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_byte_write) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_frequency) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ i2c_api.o(i.i2c_frequency) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_Init) for HAL_I2C_Init
+ i2c_api.o(i.i2c_frequency) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_init) refers to mbed_pinmap_common.o(i.pinmap_peripheral) for pinmap_peripheral
+ i2c_api.o(i.i2c_init) refers to mbed_pinmap_common.o(i.pinmap_merge) for pinmap_merge
+ i2c_api.o(i.i2c_init) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ i2c_api.o(i.i2c_init) refers to mbed_pinmap_common.o(i.pinmap_pinout) for pinmap_pinout
+ i2c_api.o(i.i2c_init) refers to pinmap.o(i.pin_mode) for pin_mode
+ i2c_api.o(i.i2c_init) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_Init) for HAL_I2C_Init
+ i2c_api.o(i.i2c_init) refers to peripheralpins.o(.constdata) for PinMap_I2C_SDA
+ i2c_api.o(i.i2c_init) refers to peripheralpins.o(.constdata) for PinMap_I2C_SCL
+ i2c_api.o(i.i2c_init) refers to i2c_api.o(.data) for .data
+ i2c_api.o(i.i2c_init) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_read) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_reset) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_slave_mode) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_slave_read) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_slave_receive) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_slave_write) refers to i2c_api.o(.bss) for .bss
+ i2c_api.o(i.i2c_write) refers to i2c_api.o(.bss) for .bss
+ mbed_overrides.o(i.HAL_Delay) refers to us_ticker.o(i.us_ticker_read) for us_ticker_read
+ mbed_overrides.o(i.mbed_sdk_init) refers to system_stm32f4xx.o(i.SystemCoreClockUpdate) for SystemCoreClockUpdate
+ mbed_overrides.o(i.mbed_sdk_init) refers to stm32f4xx_hal.o(i.HAL_Init) for HAL_Init
+ pinmap.o(i.Set_GPIO_Clock) refers to mbed_error.o(i.error) for error
+ pinmap.o(i.pin_function) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ pinmap.o(i.pin_function) refers to pinmap.o(i.Set_GPIO_Clock) for Set_GPIO_Clock
+ pinmap.o(i.pin_function) refers to stm32f4xx_hal_gpio.o(i.HAL_GPIO_Init) for HAL_GPIO_Init
+ pinmap.o(i.pin_function) refers to pinmap.o(.constdata) for .constdata
+ pinmap.o(i.pin_mode) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ pinmap.o(i.pin_mode) refers to pinmap.o(i.Set_GPIO_Clock) for Set_GPIO_Clock
+ port_api.o(i.port_dir) refers to pinmap.o(i.pin_function) for pin_function
+ port_api.o(i.port_init) refers to pinmap.o(i.Set_GPIO_Clock) for Set_GPIO_Clock
+ port_api.o(i.port_init) refers to pinmap.o(i.pin_function) for pin_function
+ port_api.o(i.port_mode) refers to pinmap.o(i.pin_mode) for pin_mode
+ pwmout_api.o(i.pwmout_free) refers to pinmap.o(i.pin_function) for pin_function
+ pwmout_api.o(i.pwmout_init) refers to mbed_pinmap_common.o(i.pinmap_peripheral) for pinmap_peripheral
+ pwmout_api.o(i.pwmout_init) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ pwmout_api.o(i.pwmout_init) refers to mbed_pinmap_common.o(i.pinmap_function) for pinmap_function
+ pwmout_api.o(i.pwmout_init) refers to mbed_pinmap_common.o(i.pinmap_pinout) for pinmap_pinout
+ pwmout_api.o(i.pwmout_init) refers to pwmout_api.o(i.pwmout_period_us) for pwmout_period_us
+ pwmout_api.o(i.pwmout_init) refers to peripheralpins.o(.constdata) for PinMap_PWM
+ pwmout_api.o(i.pwmout_period) refers to pwmout_api.o(i.pwmout_period_us) for pwmout_period_us
+ pwmout_api.o(i.pwmout_period_ms) refers to pwmout_api.o(i.pwmout_period_us) for pwmout_period_us
+ pwmout_api.o(i.pwmout_period_us) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetClockConfig) for HAL_RCC_GetClockConfig
+ pwmout_api.o(i.pwmout_period_us) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq) for HAL_RCC_GetPCLK1Freq
+ pwmout_api.o(i.pwmout_period_us) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq) for HAL_RCC_GetPCLK2Freq
+ pwmout_api.o(i.pwmout_period_us) refers to mbed_error.o(i.error) for error
+ pwmout_api.o(i.pwmout_period_us) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Init) for HAL_TIM_PWM_Init
+ pwmout_api.o(i.pwmout_period_us) refers to pwmout_api.o(i.pwmout_write) for pwmout_write
+ pwmout_api.o(i.pwmout_period_us) refers to pwmout_api.o(.bss) for .bss
+ pwmout_api.o(i.pwmout_pulsewidth) refers to pwmout_api.o(i.pwmout_write) for pwmout_write
+ pwmout_api.o(i.pwmout_pulsewidth_ms) refers to pwmout_api.o(i.pwmout_write) for pwmout_write
+ pwmout_api.o(i.pwmout_pulsewidth_us) refers to pwmout_api.o(i.pwmout_write) for pwmout_write
+ pwmout_api.o(i.pwmout_write) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_ConfigChannel) for HAL_TIM_PWM_ConfigChannel
+ pwmout_api.o(i.pwmout_write) refers to mbed_error.o(i.error) for error
+ pwmout_api.o(i.pwmout_write) refers to stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Start) for HAL_TIMEx_PWMN_Start
+ pwmout_api.o(i.pwmout_write) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Start) for HAL_TIM_PWM_Start
+ pwmout_api.o(i.pwmout_write) refers to pwmout_api.o(.bss) for .bss
+ rtc_api.o(i.rtc_free) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_OscConfig) for HAL_RCC_OscConfig
+ rtc_api.o(i.rtc_init) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_OscConfig) for HAL_RCC_OscConfig
+ rtc_api.o(i.rtc_init) refers to mbed_error.o(i.error) for error
+ rtc_api.o(i.rtc_init) refers to stm32f4xx_hal_rtc.o(i.HAL_RTC_Init) for HAL_RTC_Init
+ rtc_api.o(i.rtc_init) refers to rtc_api.o(.bss) for .bss
+ rtc_api.o(i.rtc_read) refers to stm32f4xx_hal_rtc.o(i.HAL_RTC_GetTime) for HAL_RTC_GetTime
+ rtc_api.o(i.rtc_read) refers to stm32f4xx_hal_rtc.o(i.HAL_RTC_GetDate) for HAL_RTC_GetDate
+ rtc_api.o(i.rtc_read) refers to mktime.o(.text) for mktime
+ rtc_api.o(i.rtc_read) refers to rtc_api.o(.bss) for .bss
+ rtc_api.o(i.rtc_write) refers to localtime.o(.text) for localtime
+ rtc_api.o(i.rtc_write) refers to stm32f4xx_hal_rtc.o(i.HAL_RTC_SetDate) for HAL_RTC_SetDate
+ rtc_api.o(i.rtc_write) refers to stm32f4xx_hal_rtc.o(i.HAL_RTC_SetTime) for HAL_RTC_SetTime
+ rtc_api.o(i.rtc_write) refers to rtc_api.o(.bss) for .bss
+ serial_api.o(i.init_uart) refers to system_stm32f4xx.o(i.SystemCoreClockUpdate) for SystemCoreClockUpdate
+ serial_api.o(i.init_uart) refers to stm32f4xx_hal_uart.o(i.HAL_UART_Init) for HAL_UART_Init
+ serial_api.o(i.init_uart) refers to mbed_error.o(i.error) for error
+ serial_api.o(i.init_uart) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_baud) refers to serial_api.o(i.init_uart) for init_uart
+ serial_api.o(i.serial_break_set) refers to stm32f4xx_hal_uart.o(i.HAL_LIN_SendBreak) for HAL_LIN_SendBreak
+ serial_api.o(i.serial_break_set) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_clear) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_format) refers to serial_api.o(i.init_uart) for init_uart
+ serial_api.o(i.serial_free) refers to pinmap.o(i.pin_function) for pin_function
+ serial_api.o(i.serial_free) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_getc) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_init) refers to mbed_pinmap_common.o(i.pinmap_peripheral) for pinmap_peripheral
+ serial_api.o(i.serial_init) refers to mbed_pinmap_common.o(i.pinmap_merge) for pinmap_merge
+ serial_api.o(i.serial_init) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ serial_api.o(i.serial_init) refers to mbed_pinmap_common.o(i.pinmap_pinout) for pinmap_pinout
+ serial_api.o(i.serial_init) refers to pinmap.o(i.pin_mode) for pin_mode
+ serial_api.o(i.serial_init) refers to serial_api.o(i.init_uart) for init_uart
+ serial_api.o(i.serial_init) refers to rt_memcpy_w.o(.text) for __aeabi_memcpy4
+ serial_api.o(i.serial_init) refers to peripheralpins.o(.constdata) for PinMap_UART_TX
+ serial_api.o(i.serial_init) refers to peripheralpins.o(.constdata) for PinMap_UART_RX
+ serial_api.o(i.serial_init) refers to serial_api.o(.data) for .data
+ serial_api.o(i.serial_init) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_irq_handler) refers to serial_api.o(.data) for .data
+ serial_api.o(i.serial_irq_handler) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_irq_handler_asynch) refers to stm32f4xx_hal_uart.o(i.HAL_UART_IRQHandler) for HAL_UART_IRQHandler
+ serial_api.o(i.serial_irq_handler_asynch) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_irq_set) refers to cmsis_nvic.o(i.__NVIC_SetVector) for __NVIC_SetVector
+ serial_api.o(i.serial_irq_set) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_irq_set) refers to serial_api.o(i.uart1_irq) for uart1_irq
+ serial_api.o(i.serial_irq_set) refers to serial_api.o(i.uart2_irq) for uart2_irq
+ serial_api.o(i.serial_irq_set) refers to serial_api.o(i.uart6_irq) for uart6_irq
+ serial_api.o(i.serial_pinout_tx) refers to mbed_pinmap_common.o(i.pinmap_pinout) for pinmap_pinout
+ serial_api.o(i.serial_pinout_tx) refers to peripheralpins.o(.constdata) for PinMap_UART_TX
+ serial_api.o(i.serial_putc) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_readable) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_rx_abort_asynch) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_rx_active) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ serial_api.o(i.serial_rx_active) refers to stm32f4xx_hal_uart.o(i.HAL_UART_GetState) for HAL_UART_GetState
+ serial_api.o(i.serial_rx_active) refers to serial_api.o(i.serial_tx_active) for i.serial_tx_active
+ serial_api.o(i.serial_rx_active) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_rx_asynch) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ serial_api.o(i.serial_rx_asynch) refers to stm32f4xx_hal_uart.o(i.HAL_UART_GetState) for HAL_UART_GetState
+ serial_api.o(i.serial_rx_asynch) refers to cmsis_nvic.o(i.__NVIC_SetVector) for __NVIC_SetVector
+ serial_api.o(i.serial_rx_asynch) refers to stm32f4xx_hal_uart.o(i.HAL_UART_Receive_IT) for HAL_UART_Receive_IT
+ serial_api.o(i.serial_rx_asynch) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_rx_asynch) refers to serial_api.o(i.serial_tx_active) for i.serial_tx_active
+ serial_api.o(i.serial_set_flow_control) refers to mbed_pinmap_common.o(i.pinmap_peripheral) for pinmap_peripheral
+ serial_api.o(i.serial_set_flow_control) refers to mbed_pinmap_common.o(i.pinmap_merge) for pinmap_merge
+ serial_api.o(i.serial_set_flow_control) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ serial_api.o(i.serial_set_flow_control) refers to mbed_pinmap_common.o(i.pinmap_pinout) for pinmap_pinout
+ serial_api.o(i.serial_set_flow_control) refers to serial_api.o(i.init_uart) for init_uart
+ serial_api.o(i.serial_set_flow_control) refers to peripheralpins.o(.constdata) for PinMap_UART_RTS
+ serial_api.o(i.serial_set_flow_control) refers to peripheralpins.o(.constdata) for PinMap_UART_CTS
+ serial_api.o(i.serial_tx_abort_asynch) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_tx_active) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ serial_api.o(i.serial_tx_active) refers to stm32f4xx_hal_uart.o(i.HAL_UART_GetState) for HAL_UART_GetState
+ serial_api.o(i.serial_tx_active) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_tx_asynch) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ serial_api.o(i.serial_tx_asynch) refers to stm32f4xx_hal_uart.o(i.HAL_UART_GetState) for HAL_UART_GetState
+ serial_api.o(i.serial_tx_asynch) refers to cmsis_nvic.o(i.__NVIC_SetVector) for __NVIC_SetVector
+ serial_api.o(i.serial_tx_asynch) refers to stm32f4xx_hal_uart.o(i.HAL_UART_Transmit_IT) for HAL_UART_Transmit_IT
+ serial_api.o(i.serial_tx_asynch) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.serial_tx_asynch) refers to serial_api.o(i.serial_tx_active) for i.serial_tx_active
+ serial_api.o(i.serial_writable) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.uart1_irq) refers to serial_api.o(i.uart_irq) for uart_irq
+ serial_api.o(i.uart2_irq) refers to serial_api.o(i.uart_irq) for uart_irq
+ serial_api.o(i.uart6_irq) refers to serial_api.o(i.uart_irq) for uart_irq
+ serial_api.o(i.uart_irq) refers to serial_api.o(.bss) for .bss
+ serial_api.o(i.uart_irq) refers to serial_api.o(.data) for .data
+ sleep.o(i.deepsleep) refers to stm32f4xx_hal_pwr.o(i.HAL_PWR_EnterSTOPMode) for HAL_PWR_EnterSTOPMode
+ sleep.o(i.deepsleep) refers to system_stm32f4xx.o(i.SetSysClock) for SetSysClock
+ sleep.o(i.sleep) refers to hal_tick.o(i.HAL_SuspendTick) for HAL_SuspendTick
+ sleep.o(i.sleep) refers to stm32f4xx_hal_pwr.o(i.HAL_PWR_EnterSLEEPMode) for HAL_PWR_EnterSLEEPMode
+ sleep.o(i.sleep) refers to hal_tick.o(i.HAL_ResumeTick) for HAL_ResumeTick
+ spi_api.o(i.init_spi) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_Init) for HAL_SPI_Init
+ spi_api.o(i.init_spi) refers to mbed_error.o(i.error) for error
+ spi_api.o(i.init_spi) refers to spi_api.o(.bss) for .bss
+ spi_api.o(i.spi_busy) refers to spi_api.o(.bss) for .bss
+ spi_api.o(i.spi_format) refers to spi_api.o(i.init_spi) for init_spi
+ spi_api.o(i.spi_free) refers to pinmap.o(i.pin_function) for pin_function
+ spi_api.o(i.spi_frequency) refers to mbed_error.o(i.error) for error
+ spi_api.o(i.spi_frequency) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq) for HAL_RCC_GetPCLK2Freq
+ spi_api.o(i.spi_frequency) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq) for HAL_RCC_GetPCLK1Freq
+ spi_api.o(i.spi_frequency) refers to spi_api.o(i.init_spi) for init_spi
+ spi_api.o(i.spi_frequency) refers to spi_api.o(.constdata) for .constdata
+ spi_api.o(i.spi_init) refers to mbed_pinmap_common.o(i.pinmap_peripheral) for pinmap_peripheral
+ spi_api.o(i.spi_init) refers to mbed_pinmap_common.o(i.pinmap_merge) for pinmap_merge
+ spi_api.o(i.spi_init) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ spi_api.o(i.spi_init) refers to mbed_pinmap_common.o(i.pinmap_pinout) for pinmap_pinout
+ spi_api.o(i.spi_init) refers to spi_api.o(i.init_spi) for init_spi
+ spi_api.o(i.spi_init) refers to peripheralpins.o(.constdata) for PinMap_SPI_MOSI
+ spi_api.o(i.spi_init) refers to peripheralpins.o(.constdata) for PinMap_SPI_MISO
+ spi_api.o(i.spi_init) refers to peripheralpins.o(.constdata) for PinMap_SPI_SCLK
+ spi_api.o(i.spi_init) refers to peripheralpins.o(.constdata) for PinMap_SPI_SSEL
+ spi_api.o(i.spi_master_write) refers to spi_api.o(.bss) for .bss
+ spi_api.o(i.spi_slave_read) refers to spi_api.o(.bss) for .bss
+ spi_api.o(i.spi_slave_receive) refers to spi_api.o(.bss) for .bss
+ spi_api.o(i.spi_slave_write) refers to spi_api.o(.bss) for .bss
+ stm32f4xx_hal.o(i.HAL_DeInit) refers to stm32f4xx_hal_msp_template.o(i.HAL_MspDeInit) for HAL_MspDeInit
+ stm32f4xx_hal.o(i.HAL_Delay) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal.o(i.HAL_GetTick) refers to stm32f4xx_hal.o(.data) for .data
+ stm32f4xx_hal.o(i.HAL_IncTick) refers to stm32f4xx_hal.o(.data) for .data
+ stm32f4xx_hal.o(i.HAL_Init) refers to stm32f4xx_hal_cortex.o(i.HAL_NVIC_SetPriorityGrouping) for HAL_NVIC_SetPriorityGrouping
+ stm32f4xx_hal.o(i.HAL_Init) refers to hal_tick.o(i.HAL_InitTick) for HAL_InitTick
+ stm32f4xx_hal.o(i.HAL_Init) refers to stm32f4xx_hal_msp_template.o(i.HAL_MspInit) for HAL_MspInit
+ stm32f4xx_hal.o(i.HAL_InitTick) refers to stm32f4xx_hal_cortex.o(i.HAL_SYSTICK_Config) for HAL_SYSTICK_Config
+ stm32f4xx_hal.o(i.HAL_InitTick) refers to stm32f4xx_hal_cortex.o(i.HAL_NVIC_SetPriority) for HAL_NVIC_SetPriority
+ stm32f4xx_hal.o(i.HAL_InitTick) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_adc.o(i.ADC_DMAConvCplt) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_ConvCpltCallback) for HAL_ADC_ConvCpltCallback
+ stm32f4xx_hal_adc.o(i.ADC_DMAError) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_ErrorCallback) for HAL_ADC_ErrorCallback
+ stm32f4xx_hal_adc.o(i.ADC_DMAHalfConvCplt) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_ConvHalfCpltCallback) for HAL_ADC_ConvHalfCpltCallback
+ stm32f4xx_hal_adc.o(i.HAL_ADC_ConfigChannel) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_adc.o(i.HAL_ADC_DeInit) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_MspDeInit) for HAL_ADC_MspDeInit
+ stm32f4xx_hal_adc.o(i.HAL_ADC_IRQHandler) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_ConvCpltCallback) for HAL_ADC_ConvCpltCallback
+ stm32f4xx_hal_adc.o(i.HAL_ADC_IRQHandler) refers to stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedConvCpltCallback) for HAL_ADCEx_InjectedConvCpltCallback
+ stm32f4xx_hal_adc.o(i.HAL_ADC_IRQHandler) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_LevelOutOfWindowCallback) for HAL_ADC_LevelOutOfWindowCallback
+ stm32f4xx_hal_adc.o(i.HAL_ADC_IRQHandler) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_ErrorCallback) for HAL_ADC_ErrorCallback
+ stm32f4xx_hal_adc.o(i.HAL_ADC_Init) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_MspInit) for HAL_ADC_MspInit
+ stm32f4xx_hal_adc.o(i.HAL_ADC_PollForConversion) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_adc.o(i.HAL_ADC_PollForEvent) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_adc.o(i.HAL_ADC_Start) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_adc.o(i.HAL_ADC_Start_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_adc.o(i.HAL_ADC_Start_DMA) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_adc.o(i.HAL_ADC_Start_DMA) refers to stm32f4xx_hal_adc.o(i.ADC_DMAConvCplt) for ADC_DMAConvCplt
+ stm32f4xx_hal_adc.o(i.HAL_ADC_Start_DMA) refers to stm32f4xx_hal_adc.o(i.ADC_DMAHalfConvCplt) for ADC_DMAHalfConvCplt
+ stm32f4xx_hal_adc.o(i.HAL_ADC_Start_DMA) refers to stm32f4xx_hal_adc.o(i.ADC_DMAError) for ADC_DMAError
+ stm32f4xx_hal_adc.o(i.HAL_ADC_Start_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_adc.o(i.HAL_ADC_Stop_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_adc_ex.o(i.ADC_MultiModeDMAConvCplt) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_ConvCpltCallback) for HAL_ADC_ConvCpltCallback
+ stm32f4xx_hal_adc_ex.o(i.ADC_MultiModeDMAError) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_ErrorCallback) for HAL_ADC_ErrorCallback
+ stm32f4xx_hal_adc_ex.o(i.ADC_MultiModeDMAHalfConvCplt) refers to stm32f4xx_hal_adc.o(i.HAL_ADC_ConvHalfCpltCallback) for HAL_ADC_ConvHalfCpltCallback
+ stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedPollForConversion) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedStart) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedStart_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeStart_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeStart_DMA) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeStart_DMA) refers to stm32f4xx_hal_adc_ex.o(i.ADC_MultiModeDMAConvCplt) for ADC_MultiModeDMAConvCplt
+ stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeStart_DMA) refers to stm32f4xx_hal_adc_ex.o(i.ADC_MultiModeDMAHalfConvCplt) for ADC_MultiModeDMAHalfConvCplt
+ stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeStart_DMA) refers to stm32f4xx_hal_adc_ex.o(i.ADC_MultiModeDMAError) for ADC_MultiModeDMAError
+ stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeStop_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_cortex.o(i.HAL_SYSTICK_IRQHandler) refers to stm32f4xx_hal_cortex.o(i.HAL_SYSTICK_Callback) for HAL_SYSTICK_Callback
+ stm32f4xx_hal_crc.o(i.HAL_CRC_DeInit) refers to stm32f4xx_hal_crc.o(i.HAL_CRC_MspDeInit) for HAL_CRC_MspDeInit
+ stm32f4xx_hal_crc.o(i.HAL_CRC_Init) refers to stm32f4xx_hal_crc.o(i.HAL_CRC_MspInit) for HAL_CRC_MspInit
+ stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_dma.o(i.HAL_DMA_DeInit) refers to stm32f4xx_hal_dma.o(.constdata) for .constdata
+ stm32f4xx_hal_dma.o(i.HAL_DMA_IRQHandler) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_dma.o(i.HAL_DMA_Init) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_dma.o(i.HAL_DMA_Init) refers to stm32f4xx_hal_dma.o(.constdata) for .constdata
+ stm32f4xx_hal_dma.o(i.HAL_DMA_PollForTransfer) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_flash.o(i.FLASH_SetErrorCode) refers to stm32f4xx_hal_flash.o(.bss) for .bss
+ stm32f4xx_hal_flash.o(i.FLASH_WaitForLastOperation) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_flash.o(i.FLASH_WaitForLastOperation) refers to stm32f4xx_hal_flash.o(i.FLASH_SetErrorCode) for FLASH_SetErrorCode
+ stm32f4xx_hal_flash.o(i.FLASH_WaitForLastOperation) refers to stm32f4xx_hal_flash.o(.bss) for .bss
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_GetError) refers to stm32f4xx_hal_flash.o(.bss) for .bss
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_IRQHandler) refers to stm32f4xx_hal_flash.o(i.FLASH_SetErrorCode) for FLASH_SetErrorCode
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_IRQHandler) refers to stm32f4xx_hal_flash.o(i.HAL_FLASH_OperationErrorCallback) for HAL_FLASH_OperationErrorCallback
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_IRQHandler) refers to stm32f4xx_hal_flash.o(i.HAL_FLASH_EndOfOperationCallback) for HAL_FLASH_EndOfOperationCallback
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_IRQHandler) refers to stm32f4xx_hal_flash_ex.o(i.FLASH_Erase_Sector) for FLASH_Erase_Sector
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_IRQHandler) refers to stm32f4xx_hal_flash_ex.o(i.FLASH_FlushCaches) for FLASH_FlushCaches
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_IRQHandler) refers to stm32f4xx_hal_flash.o(.bss) for .bss
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_OB_Launch) refers to stm32f4xx_hal_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_Program) refers to stm32f4xx_hal_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_Program) refers to stm32f4xx_hal_flash.o(.bss) for .bss
+ stm32f4xx_hal_flash.o(i.HAL_FLASH_Program_IT) refers to stm32f4xx_hal_flash.o(.bss) for .bss
+ stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_AdvOBProgram) refers to stm32f4xx_hal_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+ stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_Erase) refers to stm32f4xx_hal_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+ stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_Erase) refers to stm32f4xx_hal_flash.o(.bss) for pFlash
+ stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_Erase_IT) refers to stm32f4xx_hal_flash.o(.bss) for pFlash
+ stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_OBProgram) refers to stm32f4xx_hal_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+ stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_OBProgram) refers to stm32f4xx_hal_flash.o(.bss) for pFlash
+ stm32f4xx_hal_gpio.o(i.HAL_GPIO_EXTI_IRQHandler) refers to stm32f4xx_hal_gpio.o(i.HAL_GPIO_EXTI_Callback) for HAL_GPIO_EXTI_Callback
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_DeInit) refers to stm32f4xx_hal_hcd.o(i.HAL_HCD_MspDeInit) for HAL_HCD_MspDeInit
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_DeInit) refers to stm32f4xx_ll_usb.o(i.USB_DisableGlobalInt) for USB_DisableGlobalInt
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_GetCurrentFrame) refers to stm32f4xx_ll_usb.o(i.USB_GetCurrentFrame) for USB_GetCurrentFrame
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_GetCurrentSpeed) refers to stm32f4xx_ll_usb.o(i.USB_GetHostSpeed) for USB_GetHostSpeed
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_Halt) refers to stm32f4xx_ll_usb.o(i.USB_HC_Halt) for USB_HC_Halt
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_Init) refers to stm32f4xx_ll_usb.o(i.USB_HC_Init) for USB_HC_Init
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_SubmitRequest) refers to stm32f4xx_ll_usb.o(i.USB_HC_StartXfer) for USB_HC_StartXfer
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_GetMode) for USB_GetMode
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_ReadInterrupts) for USB_ReadInterrupts
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_hal_hcd.o(i.HAL_HCD_Disconnect_Callback) for HAL_HCD_Disconnect_Callback
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_InitFSLSPClkSel) for USB_InitFSLSPClkSel
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_hal_hcd.o(i.HAL_HCD_Connect_Callback) for HAL_HCD_Connect_Callback
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_hal_hcd.o(i.HAL_HCD_SOF_Callback) for HAL_HCD_SOF_Callback
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_HC_ReadInterrupt) for USB_HC_ReadInterrupt
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_HC_Halt) for USB_HC_Halt
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_NotifyURBChange_Callback) for HAL_HCD_HC_NotifyURBChange_Callback
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_ReadPacket) for USB_ReadPacket
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_Init) refers to stm32f4xx_hal_hcd.o(i.HAL_HCD_MspInit) for HAL_HCD_MspInit
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_Init) refers to stm32f4xx_ll_usb.o(i.USB_DisableGlobalInt) for USB_DisableGlobalInt
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_Init) refers to stm32f4xx_ll_usb.o(i.USB_CoreInit) for USB_CoreInit
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_Init) refers to stm32f4xx_ll_usb.o(i.USB_SetCurrentMode) for USB_SetCurrentMode
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_Init) refers to stm32f4xx_ll_usb.o(i.USB_HostInit) for USB_HostInit
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_ResetPort) refers to stm32f4xx_ll_usb.o(i.USB_ResetPort) for USB_ResetPort
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_Start) refers to stm32f4xx_ll_usb.o(i.USB_EnableGlobalInt) for USB_EnableGlobalInt
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_Start) refers to stm32f4xx_ll_usb.o(i.USB_DriveVbus) for USB_DriveVbus
+ stm32f4xx_hal_hcd.o(i.HAL_HCD_Stop) refers to stm32f4xx_ll_usb.o(i.USB_StopHost) for USB_StopHost
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_DeInit) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_MspDeInit) for HAL_I2C_MspDeInit
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_ER_IRQHandler) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort_IT) for HAL_DMA_Abort_IT
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_ER_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_SlaveTxCpltCallback) for HAL_I2C_SlaveTxCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_ER_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_ListenCpltCallback) for HAL_I2C_ListenCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_ER_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_ErrorCallback) for HAL_I2C_ErrorCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_ER_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_AbortCpltCallback) for HAL_I2C_AbortCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_ER_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAAbort) for I2C_DMAAbort
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_EV_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_AddrCallback) for HAL_I2C_AddrCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_EV_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_MemTxCpltCallback) for HAL_I2C_MemTxCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_EV_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_MasterTxCpltCallback) for HAL_I2C_MasterTxCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_EV_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_MemRxCpltCallback) for HAL_I2C_MemRxCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_EV_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_MasterRxCpltCallback) for HAL_I2C_MasterRxCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_EV_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_ListenCpltCallback) for HAL_I2C_ListenCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_EV_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_SlaveTxCpltCallback) for HAL_I2C_SlaveTxCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_EV_IRQHandler) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_SlaveRxCpltCallback) for HAL_I2C_SlaveRxCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Init) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_MspInit) for HAL_I2C_MspInit
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Init) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq) for HAL_RCC_GetPCLK1Freq
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_IsDeviceReady) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_IsDeviceReady) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Abort_IT) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_AbortCpltCallback) for HAL_I2C_AbortCpltCallback
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive) refers to stm32f4xx_hal_i2c.o(i.I2C_MasterRequestRead) for I2C_MasterRequestRead
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive_DMA) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_MasterRequestRead) for I2C_MasterRequestRead
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive_DMA) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt) for I2C_DMAXferCplt
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAError) for I2C_DMAError
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Sequential_Receive_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Sequential_Transmit_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit) refers to stm32f4xx_hal_i2c.o(i.I2C_MasterRequestWrite) for I2C_MasterRequestWrite
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnTXEFlagUntilTimeout) for I2C_WaitOnTXEFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit_DMA) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_MasterRequestWrite) for I2C_MasterRequestWrite
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit_DMA) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt) for I2C_DMAXferCplt
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAError) for I2C_DMAError
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read) refers to stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryRead) for I2C_RequestMemoryRead
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read_DMA) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryRead) for I2C_RequestMemoryRead
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read_DMA) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt) for I2C_DMAXferCplt
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAError) for I2C_DMAError
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write) refers to stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryWrite) for I2C_RequestMemoryWrite
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnTXEFlagUntilTimeout) for I2C_WaitOnTXEFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_DMA) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryWrite) for I2C_RequestMemoryWrite
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryRead) for I2C_RequestMemoryRead
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_DMA) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt) for I2C_DMAXferCplt
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAError) for I2C_DMAError
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive_DMA) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt) for I2C_DMAXferCplt
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAError) for I2C_DMAError
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnTXEFlagUntilTimeout) for I2C_WaitOnTXEFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit_DMA) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt) for I2C_DMAXferCplt
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit_DMA) refers to stm32f4xx_hal_i2c.o(i.I2C_DMAError) for I2C_DMAError
+ stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_i2c.o(i.I2C_DMAAbort) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_ErrorCallback) for HAL_I2C_ErrorCallback
+ stm32f4xx_hal_i2c.o(i.I2C_DMAAbort) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_AbortCpltCallback) for HAL_I2C_AbortCpltCallback
+ stm32f4xx_hal_i2c.o(i.I2C_DMAError) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_ErrorCallback) for HAL_I2C_ErrorCallback
+ stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_ErrorCallback) for HAL_I2C_ErrorCallback
+ stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_MasterRxCpltCallback) for HAL_I2C_MasterRxCpltCallback
+ stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt) refers to stm32f4xx_hal_i2c.o(i.HAL_I2C_MemRxCpltCallback) for HAL_I2C_MemRxCpltCallback
+ stm32f4xx_hal_i2c.o(i.I2C_MasterRequestRead) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_MasterRequestRead) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnMasterAddressFlagUntilTimeout) for I2C_WaitOnMasterAddressFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_MasterRequestWrite) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_MasterRequestWrite) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnMasterAddressFlagUntilTimeout) for I2C_WaitOnMasterAddressFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryRead) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryRead) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnMasterAddressFlagUntilTimeout) for I2C_WaitOnMasterAddressFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryRead) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnTXEFlagUntilTimeout) for I2C_WaitOnTXEFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryWrite) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) for I2C_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryWrite) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnMasterAddressFlagUntilTimeout) for I2C_WaitOnMasterAddressFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryWrite) refers to stm32f4xx_hal_i2c.o(i.I2C_WaitOnTXEFlagUntilTimeout) for I2C_WaitOnTXEFlagUntilTimeout
+ stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.I2C_WaitOnMasterAddressFlagUntilTimeout) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2c.o(i.I2C_WaitOnTXEFlagUntilTimeout) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_DMAStop) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_DeInit) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_MspDeInit) for HAL_I2S_MspDeInit
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_IRQHandler) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_RxCpltCallback) for HAL_I2S_RxCpltCallback
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_IRQHandler) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_ErrorCallback) for HAL_I2S_ErrorCallback
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_IRQHandler) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_TxCpltCallback) for HAL_I2S_TxCpltCallback
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Init) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_MspInit) for HAL_I2S_MspInit
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Init) refers to stm32f4xx_hal_i2s_ex.o(i.I2S_GetInputClock) for I2S_GetInputClock
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Receive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Receive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Receive_DMA) refers to stm32f4xx_hal_i2s.o(i.I2S_DMARxHalfCplt) for I2S_DMARxHalfCplt
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Receive_DMA) refers to stm32f4xx_hal_i2s_ex.o(i.I2S_DMARxCplt) for I2S_DMARxCplt
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Receive_DMA) refers to stm32f4xx_hal_i2s.o(i.I2S_DMAError) for I2S_DMAError
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Transmit) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Transmit) refers to stm32f4xx_hal_i2s.o(i.I2S_WaitFlagStateUntilTimeout) for I2S_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Transmit_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Transmit_DMA) refers to stm32f4xx_hal_i2s.o(i.I2S_DMATxHalfCplt) for I2S_DMATxHalfCplt
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Transmit_DMA) refers to stm32f4xx_hal_i2s_ex.o(i.I2S_DMATxCplt) for I2S_DMATxCplt
+ stm32f4xx_hal_i2s.o(i.HAL_I2S_Transmit_DMA) refers to stm32f4xx_hal_i2s.o(i.I2S_DMAError) for I2S_DMAError
+ stm32f4xx_hal_i2s.o(i.I2S_DMAError) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_ErrorCallback) for HAL_I2S_ErrorCallback
+ stm32f4xx_hal_i2s.o(i.I2S_DMARxHalfCplt) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_RxHalfCpltCallback) for HAL_I2S_RxHalfCpltCallback
+ stm32f4xx_hal_i2s.o(i.I2S_DMATxHalfCplt) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_TxHalfCpltCallback) for HAL_I2S_TxHalfCpltCallback
+ stm32f4xx_hal_i2s.o(i.I2S_Receive_IT) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_RxCpltCallback) for HAL_I2S_RxCpltCallback
+ stm32f4xx_hal_i2s.o(i.I2S_Transmit_IT) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_TxCpltCallback) for HAL_I2S_TxCpltCallback
+ stm32f4xx_hal_i2s.o(i.I2S_WaitFlagStateUntilTimeout) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive) refers to stm32f4xx_hal_i2s.o(i.I2S_WaitFlagStateUntilTimeout) for I2S_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive_DMA) refers to stm32f4xx_hal_i2s.o(i.I2S_DMARxHalfCplt) for I2S_DMARxHalfCplt
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive_DMA) refers to stm32f4xx_hal_i2s_ex.o(i.I2S_DMARxCplt) for I2S_DMARxCplt
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive_DMA) refers to stm32f4xx_hal_i2s.o(i.I2S_DMAError) for I2S_DMAError
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive_DMA) refers to stm32f4xx_hal_i2s.o(i.I2S_DMATxHalfCplt) for I2S_DMATxHalfCplt
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive_DMA) refers to stm32f4xx_hal_i2s_ex.o(i.I2S_DMATxCplt) for I2S_DMATxCplt
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_DMAStop) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_IRQHandler) refers to stm32f4xx_hal_i2s.o(i.I2S_Receive_IT) for I2S_Receive_IT
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_IRQHandler) refers to stm32f4xx_hal_i2s.o(i.I2S_Transmit_IT) for I2S_Transmit_IT
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_IRQHandler) refers to stm32f4xx_hal_i2s_ex.o(i.I2SEx_TransmitReceive_IT) for I2SEx_TransmitReceive_IT
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_IRQHandler) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_ErrorCallback) for HAL_I2S_ErrorCallback
+ stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_Init) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_MspInit) for HAL_I2S_MspInit
+ stm32f4xx_hal_i2s_ex.o(i.I2SEx_TransmitReceive_IT) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_TxCpltCallback) for HAL_I2S_TxCpltCallback
+ stm32f4xx_hal_i2s_ex.o(i.I2SEx_TransmitReceive_IT) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_RxCpltCallback) for HAL_I2S_RxCpltCallback
+ stm32f4xx_hal_i2s_ex.o(i.I2S_DMARxCplt) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_RxCpltCallback) for HAL_I2S_RxCpltCallback
+ stm32f4xx_hal_i2s_ex.o(i.I2S_DMATxCplt) refers to stm32f4xx_hal_i2s.o(i.HAL_I2S_TxCpltCallback) for HAL_I2S_TxCpltCallback
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_DMAStop) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_DeInit) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_MspDeInit) for HAL_IRDA_MspDeInit
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_IRQHandler) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_RxCpltCallback) for HAL_IRDA_RxCpltCallback
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_IRQHandler) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort_IT) for HAL_DMA_Abort_IT
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_IRQHandler) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_ErrorCallback) for HAL_IRDA_ErrorCallback
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_IRQHandler) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_TxCpltCallback) for HAL_IRDA_TxCpltCallback
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_IRQHandler) refers to stm32f4xx_hal_irda.o(i.IRDA_DMAAbortOnError) for IRDA_DMAAbortOnError
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Init) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_MspInit) for HAL_IRDA_MspInit
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Init) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq) for HAL_RCC_GetPCLK1Freq
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Init) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq) for HAL_RCC_GetPCLK2Freq
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Receive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Receive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Receive_DMA) refers to stm32f4xx_hal_irda.o(i.IRDA_DMAReceiveCplt) for IRDA_DMAReceiveCplt
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Receive_DMA) refers to stm32f4xx_hal_irda.o(i.IRDA_DMAReceiveHalfCplt) for IRDA_DMAReceiveHalfCplt
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Receive_DMA) refers to stm32f4xx_hal_irda.o(i.IRDA_DMAError) for IRDA_DMAError
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Transmit) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Transmit) refers to stm32f4xx_hal_irda.o(i.IRDA_WaitOnFlagUntilTimeout) for IRDA_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Transmit_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Transmit_DMA) refers to stm32f4xx_hal_irda.o(i.IRDA_DMATransmitCplt) for IRDA_DMATransmitCplt
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Transmit_DMA) refers to stm32f4xx_hal_irda.o(i.IRDA_DMATransmitHalfCplt) for IRDA_DMATransmitHalfCplt
+ stm32f4xx_hal_irda.o(i.HAL_IRDA_Transmit_DMA) refers to stm32f4xx_hal_irda.o(i.IRDA_DMAError) for IRDA_DMAError
+ stm32f4xx_hal_irda.o(i.IRDA_DMAAbortOnError) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_ErrorCallback) for HAL_IRDA_ErrorCallback
+ stm32f4xx_hal_irda.o(i.IRDA_DMAError) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_ErrorCallback) for HAL_IRDA_ErrorCallback
+ stm32f4xx_hal_irda.o(i.IRDA_DMAReceiveCplt) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_RxCpltCallback) for HAL_IRDA_RxCpltCallback
+ stm32f4xx_hal_irda.o(i.IRDA_DMAReceiveHalfCplt) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_RxHalfCpltCallback) for HAL_IRDA_RxHalfCpltCallback
+ stm32f4xx_hal_irda.o(i.IRDA_DMATransmitCplt) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_TxCpltCallback) for HAL_IRDA_TxCpltCallback
+ stm32f4xx_hal_irda.o(i.IRDA_DMATransmitHalfCplt) refers to stm32f4xx_hal_irda.o(i.HAL_IRDA_TxHalfCpltCallback) for HAL_IRDA_TxHalfCpltCallback
+ stm32f4xx_hal_irda.o(i.IRDA_WaitOnFlagUntilTimeout) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_iwdg.o(i.HAL_IWDG_Init) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_DeInit) refers to stm32f4xx_ll_usb.o(i.USB_DisableGlobalInt) for USB_DisableGlobalInt
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_DeInit) refers to stm32f4xx_ll_usb.o(i.USB_StopDevice) for USB_StopDevice
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_DeInit) refers to stm32f4xx_ll_usb.o(i.USB_DevDisconnect) for USB_DevDisconnect
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_DeInit) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_MspDeInit) for HAL_PCD_MspDeInit
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_DevConnect) refers to stm32f4xx_ll_usb.o(i.USB_DevConnect) for USB_DevConnect
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_DevDisconnect) refers to stm32f4xx_ll_usb.o(i.USB_DevDisconnect) for USB_DevDisconnect
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Close) refers to stm32f4xx_ll_usb.o(i.USB_DeactivateEndpoint) for USB_DeactivateEndpoint
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_ClrStall) refers to stm32f4xx_ll_usb.o(i.USB_EPClearStall) for USB_EPClearStall
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Flush) refers to stm32f4xx_ll_usb.o(i.USB_FlushTxFifo) for USB_FlushTxFifo
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Flush) refers to stm32f4xx_ll_usb.o(i.USB_FlushRxFifo) for USB_FlushRxFifo
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Open) refers to stm32f4xx_ll_usb.o(i.USB_ActivateEndpoint) for USB_ActivateEndpoint
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Receive) refers to stm32f4xx_ll_usb.o(i.USB_EPStartXfer) for USB_EPStartXfer
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Receive) refers to stm32f4xx_ll_usb.o(i.USB_EP0StartXfer) for USB_EP0StartXfer
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_SetStall) refers to stm32f4xx_ll_usb.o(i.USB_EPSetStall) for USB_EPSetStall
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_SetStall) refers to stm32f4xx_ll_usb.o(i.USB_EP0_OutStart) for USB_EP0_OutStart
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Transmit) refers to stm32f4xx_ll_usb.o(i.USB_EPStartXfer) for USB_EPStartXfer
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Transmit) refers to stm32f4xx_ll_usb.o(i.USB_EP0StartXfer) for USB_EP0StartXfer
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_GetMode) for USB_GetMode
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_ReadInterrupts) for USB_ReadInterrupts
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_ReadDevAllOutEpInterrupt) for USB_ReadDevAllOutEpInterrupt
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_ReadDevOutEPInterrupt) for USB_ReadDevOutEPInterrupt
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_DataOutStageCallback) for HAL_PCD_DataOutStageCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_EP0_OutStart) for USB_EP0_OutStart
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_SetupStageCallback) for HAL_PCD_SetupStageCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_ReadDevAllInEpInterrupt) for USB_ReadDevAllInEpInterrupt
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_ReadDevInEPInterrupt) for USB_ReadDevInEPInterrupt
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_DataInStageCallback) for HAL_PCD_DataInStageCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_WritePacket) for USB_WritePacket
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_ResumeCallback) for HAL_PCD_ResumeCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_SuspendCallback) for HAL_PCD_SuspendCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_FlushTxFifo) for USB_FlushTxFifo
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_ActivateSetup) for USB_ActivateSetup
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_GetDevSpeed) for USB_GetDevSpeed
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_ResetCallback) for HAL_PCD_ResetCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_ll_usb.o(i.USB_ReadPacket) for USB_ReadPacket
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_SOFCallback) for HAL_PCD_SOFCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_ISOINIncompleteCallback) for HAL_PCD_ISOINIncompleteCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_ISOOUTIncompleteCallback) for HAL_PCD_ISOOUTIncompleteCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_ConnectCallback) for HAL_PCD_ConnectCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_DisconnectCallback) for HAL_PCD_DisconnectCallback
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Init) refers to stm32f4xx_hal_pcd.o(i.HAL_PCD_MspInit) for HAL_PCD_MspInit
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Init) refers to stm32f4xx_ll_usb.o(i.USB_DisableGlobalInt) for USB_DisableGlobalInt
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Init) refers to stm32f4xx_ll_usb.o(i.USB_CoreInit) for USB_CoreInit
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Init) refers to stm32f4xx_ll_usb.o(i.USB_SetCurrentMode) for USB_SetCurrentMode
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Init) refers to stm32f4xx_ll_usb.o(i.USB_DevInit) for USB_DevInit
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Init) refers to stm32f4xx_ll_usb.o(i.USB_DevDisconnect) for USB_DevDisconnect
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_SetAddress) refers to stm32f4xx_ll_usb.o(i.USB_SetDevAddress) for USB_SetDevAddress
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Start) refers to stm32f4xx_ll_usb.o(i.USB_DevConnect) for USB_DevConnect
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Start) refers to stm32f4xx_ll_usb.o(i.USB_EnableGlobalInt) for USB_EnableGlobalInt
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Stop) refers to stm32f4xx_ll_usb.o(i.USB_DisableGlobalInt) for USB_DisableGlobalInt
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Stop) refers to stm32f4xx_ll_usb.o(i.USB_StopDevice) for USB_StopDevice
+ stm32f4xx_hal_pcd.o(i.HAL_PCD_Stop) refers to stm32f4xx_ll_usb.o(i.USB_DevDisconnect) for USB_DevDisconnect
+ stm32f4xx_hal_pwr.o(i.HAL_PWR_PVD_IRQHandler) refers to stm32f4xx_hal_pwr.o(i.HAL_PWR_PVDCallback) for HAL_PWR_PVDCallback
+ stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_ControlVoltageScaling) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_DisableBkUpReg) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_EnableBkUpReg) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_ClockConfig) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_ClockConfig) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetSysClockFreq) for HAL_RCC_GetSysClockFreq
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_ClockConfig) refers to hal_tick.o(i.HAL_InitTick) for HAL_InitTick
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_ClockConfig) refers to stm32f4xx_hal_rcc.o(.constdata) for .constdata
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_ClockConfig) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_GetHCLKFreq) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq) refers to stm32f4xx_hal_rcc.o(.constdata) for .constdata
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq) refers to stm32f4xx_hal_rcc.o(.constdata) for .constdata
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_MCOConfig) refers to stm32f4xx_hal_gpio.o(i.HAL_GPIO_Init) for HAL_GPIO_Init
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_NMI_IRQHandler) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_CSSCallback) for HAL_RCC_CSSCallback
+ stm32f4xx_hal_rcc.o(i.HAL_RCC_OscConfig) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rcc_ex.o(i.HAL_RCCEx_PeriphCLKConfig) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rcc_ex.o(i.HAL_RCC_DeInit) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_AlarmIRQHandler) refers to stm32f4xx_hal_rtc.o(i.HAL_RTC_AlarmAEventCallback) for HAL_RTC_AlarmAEventCallback
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_AlarmIRQHandler) refers to stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_AlarmBEventCallback) for HAL_RTCEx_AlarmBEventCallback
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_DeInit) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_DeInit) refers to stm32f4xx_hal_rtc.o(i.HAL_RTC_MspDeInit) for HAL_RTC_MspDeInit
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_DeactivateAlarm) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_Init) refers to stm32f4xx_hal_rtc.o(i.HAL_RTC_MspInit) for HAL_RTC_MspInit
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_Init) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_PollForAlarmAEvent) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_SetAlarm) refers to stm32f4xx_hal_rtc.o(i.RTC_ByteToBcd2) for RTC_ByteToBcd2
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_SetAlarm) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_SetAlarm_IT) refers to stm32f4xx_hal_rtc.o(i.RTC_ByteToBcd2) for RTC_ByteToBcd2
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_SetAlarm_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_SetDate) refers to stm32f4xx_hal_rtc.o(i.RTC_ByteToBcd2) for RTC_ByteToBcd2
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_SetDate) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_SetTime) refers to stm32f4xx_hal_rtc.o(i.RTC_ByteToBcd2) for RTC_ByteToBcd2
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_SetTime) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc.o(i.HAL_RTC_WaitForSynchro) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc.o(i.RTC_EnterInitMode) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DeactivateCoarseCalib) refers to stm32f4xx_hal_rtc.o(i.RTC_EnterInitMode) for RTC_EnterInitMode
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DeactivateRefClock) refers to stm32f4xx_hal_rtc.o(i.RTC_EnterInitMode) for RTC_EnterInitMode
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DeactivateWakeUpTimer) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_GetTimeStamp) refers to stm32f4xx_hal_rtc.o(i.RTC_Bcd2ToByte) for RTC_Bcd2ToByte
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForAlarmBEvent) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForTamper1Event) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForTamper2Event) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForTimeStampEvent) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForWakeUpTimerEvent) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetCoarseCalib) refers to stm32f4xx_hal_rtc.o(i.RTC_EnterInitMode) for RTC_EnterInitMode
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetRefClock) refers to stm32f4xx_hal_rtc.o(i.RTC_EnterInitMode) for RTC_EnterInitMode
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetSmoothCalib) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetSynchroShift) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetSynchroShift) refers to stm32f4xx_hal_rtc.o(i.HAL_RTC_WaitForSynchro) for HAL_RTC_WaitForSynchro
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetWakeUpTimer) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetWakeUpTimer_IT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_TamperTimeStampIRQHandler) refers to stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_TimeStampEventCallback) for HAL_RTCEx_TimeStampEventCallback
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_TamperTimeStampIRQHandler) refers to stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_Tamper1EventCallback) for HAL_RTCEx_Tamper1EventCallback
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_TamperTimeStampIRQHandler) refers to stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_Tamper2EventCallback) for HAL_RTCEx_Tamper2EventCallback
+ stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_WakeUpTimerIRQHandler) refers to stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_WakeUpTimerEventCallback) for HAL_RTCEx_WakeUpTimerEventCallback
+ stm32f4xx_hal_sd.o(i.HAL_SD_CheckReadOperation) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_CheckReadOperation) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_CheckWriteOperation) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_CheckWriteOperation) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_CheckWriteOperation) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetResponse) for SDIO_GetResponse
+ stm32f4xx_hal_sd.o(i.HAL_SD_DeInit) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_PowerState_OFF) for SDIO_PowerState_OFF
+ stm32f4xx_hal_sd.o(i.HAL_SD_DeInit) refers to stm32f4xx_hal_sd.o(i.HAL_SD_MspDeInit) for HAL_SD_MspDeInit
+ stm32f4xx_hal_sd.o(i.HAL_SD_Erase) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetResponse) for SDIO_GetResponse
+ stm32f4xx_hal_sd.o(i.HAL_SD_Erase) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_Erase) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_Erase) refers to stm32f4xx_hal_sd.o(i.SD_IsCardProgramming) for SD_IsCardProgramming
+ stm32f4xx_hal_sd.o(i.HAL_SD_GetCardStatus) refers to stm32f4xx_hal_sd.o(i.HAL_SD_SendSDStatus) for HAL_SD_SendSDStatus
+ stm32f4xx_hal_sd.o(i.HAL_SD_GetStatus) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_GetStatus) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_GetStatus) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetResponse) for SDIO_GetResponse
+ stm32f4xx_hal_sd.o(i.HAL_SD_HighSpeed) refers to stm32f4xx_hal_sd.o(i.SD_FindSCR) for SD_FindSCR
+ stm32f4xx_hal_sd.o(i.HAL_SD_HighSpeed) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_HighSpeed) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_HighSpeed) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_DataConfig) for SDIO_DataConfig
+ stm32f4xx_hal_sd.o(i.HAL_SD_HighSpeed) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_ReadFIFO) for SDIO_ReadFIFO
+ stm32f4xx_hal_sd.o(i.HAL_SD_IRQHandler) refers to stm32f4xx_hal_sd.o(i.HAL_SD_XferCpltCallback) for HAL_SD_XferCpltCallback
+ stm32f4xx_hal_sd.o(i.HAL_SD_IRQHandler) refers to stm32f4xx_hal_sd.o(i.HAL_SD_XferErrorCallback) for HAL_SD_XferErrorCallback
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to stm32f4xx_hal_sd.o(i.HAL_SD_MspInit) for HAL_SD_MspInit
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_Init) for SDIO_Init
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_PowerState_ON) for SDIO_PowerState_ON
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to mbed_overrides.o(i.HAL_Delay) for HAL_Delay
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetResponse) for SDIO_GetResponse
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetPowerState) for SDIO_GetPowerState
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetCommandResponse) for SDIO_GetCommandResponse
+ stm32f4xx_hal_sd.o(i.HAL_SD_Init) refers to stm32f4xx_hal_sd.o(i.HAL_SD_Get_CardInfo) for HAL_SD_Get_CardInfo
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_DataConfig) for SDIO_DataConfig
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_ReadFIFO) for SDIO_ReadFIFO
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks_DMA) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks_DMA) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks_DMA) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_DataConfig) for SDIO_DataConfig
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks_DMA) refers to stm32f4xx_hal_sd.o(i.SD_DMA_RxCplt) for SD_DMA_RxCplt
+ stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks_DMA) refers to stm32f4xx_hal_sd.o(i.SD_DMA_RxError) for SD_DMA_RxError
+ stm32f4xx_hal_sd.o(i.HAL_SD_SendSDStatus) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetResponse) for SDIO_GetResponse
+ stm32f4xx_hal_sd.o(i.HAL_SD_SendSDStatus) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_SendSDStatus) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_SendSDStatus) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_DataConfig) for SDIO_DataConfig
+ stm32f4xx_hal_sd.o(i.HAL_SD_SendSDStatus) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_ReadFIFO) for SDIO_ReadFIFO
+ stm32f4xx_hal_sd.o(i.HAL_SD_StopTransfer) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_StopTransfer) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_WideBusOperation_Config) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetResponse) for SDIO_GetResponse
+ stm32f4xx_hal_sd.o(i.HAL_SD_WideBusOperation_Config) refers to stm32f4xx_hal_sd.o(i.SD_FindSCR) for SD_FindSCR
+ stm32f4xx_hal_sd.o(i.HAL_SD_WideBusOperation_Config) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_WideBusOperation_Config) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_WideBusOperation_Config) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_Init) for SDIO_Init
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_DataConfig) for SDIO_DataConfig
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_WriteFIFO) for SDIO_WriteFIFO
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks) refers to stm32f4xx_hal_sd.o(i.SD_IsCardProgramming) for SD_IsCardProgramming
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks_DMA) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks_DMA) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks_DMA) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_DataConfig) for SDIO_DataConfig
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks_DMA) refers to stm32f4xx_hal_sd.o(i.SD_DMA_TxCplt) for SD_DMA_TxCplt
+ stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks_DMA) refers to stm32f4xx_hal_sd.o(i.SD_DMA_TxError) for SD_DMA_TxError
+ stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetCommandResponse) for SDIO_GetCommandResponse
+ stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetResponse) for SDIO_GetResponse
+ stm32f4xx_hal_sd.o(i.SD_DMA_RxCplt) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_sd.o(i.SD_DMA_RxCplt) refers to stm32f4xx_hal_sd.o(i.HAL_SD_DMA_RxCpltCallback) for HAL_SD_DMA_RxCpltCallback
+ stm32f4xx_hal_sd.o(i.SD_DMA_RxError) refers to stm32f4xx_hal_sd.o(i.HAL_SD_DMA_RxErrorCallback) for HAL_SD_DMA_RxErrorCallback
+ stm32f4xx_hal_sd.o(i.SD_DMA_TxCplt) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_sd.o(i.SD_DMA_TxCplt) refers to stm32f4xx_hal_sd.o(i.HAL_SD_DMA_TxCpltCallback) for HAL_SD_DMA_TxCpltCallback
+ stm32f4xx_hal_sd.o(i.SD_DMA_TxError) refers to stm32f4xx_hal_sd.o(i.HAL_SD_DMA_TxErrorCallback) for HAL_SD_DMA_TxErrorCallback
+ stm32f4xx_hal_sd.o(i.SD_FindSCR) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.SD_FindSCR) refers to stm32f4xx_hal_sd.o(i.SD_CmdResp1Error) for SD_CmdResp1Error
+ stm32f4xx_hal_sd.o(i.SD_FindSCR) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_DataConfig) for SDIO_DataConfig
+ stm32f4xx_hal_sd.o(i.SD_FindSCR) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_ReadFIFO) for SDIO_ReadFIFO
+ stm32f4xx_hal_sd.o(i.SD_IsCardProgramming) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand) for SDIO_SendCommand
+ stm32f4xx_hal_sd.o(i.SD_IsCardProgramming) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetCommandResponse) for SDIO_GetCommandResponse
+ stm32f4xx_hal_sd.o(i.SD_IsCardProgramming) refers to stm32f4xx_ll_sdmmc.o(i.SDIO_GetResponse) for SDIO_GetResponse
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_DeInit) refers to stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_MspDeInit) for HAL_SMARTCARD_MspDeInit
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_IRQHandler) refers to stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_RxCpltCallback) for HAL_SMARTCARD_RxCpltCallback
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_IRQHandler) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort_IT) for HAL_DMA_Abort_IT
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_IRQHandler) refers to stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_ErrorCallback) for HAL_SMARTCARD_ErrorCallback
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_IRQHandler) refers to stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_TxCpltCallback) for HAL_SMARTCARD_TxCpltCallback
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_IRQHandler) refers to stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAAbortOnError) for SMARTCARD_DMAAbortOnError
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Init) refers to stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_MspInit) for HAL_SMARTCARD_MspInit
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Init) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq) for HAL_RCC_GetPCLK1Freq
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Init) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq) for HAL_RCC_GetPCLK2Freq
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Receive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Receive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Receive_DMA) refers to stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAReceiveCplt) for SMARTCARD_DMAReceiveCplt
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Receive_DMA) refers to stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAError) for SMARTCARD_DMAError
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Transmit) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Transmit_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Transmit_DMA) refers to stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMATransmitCplt) for SMARTCARD_DMATransmitCplt
+ stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Transmit_DMA) refers to stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAError) for SMARTCARD_DMAError
+ stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAAbortOnError) refers to stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_ErrorCallback) for HAL_SMARTCARD_ErrorCallback
+ stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAError) refers to stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_ErrorCallback) for HAL_SMARTCARD_ErrorCallback
+ stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAReceiveCplt) refers to stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_RxCpltCallback) for HAL_SMARTCARD_RxCpltCallback
+ stm32f4xx_hal_spi.o(i.HAL_SPI_DMAStop) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_spi.o(i.HAL_SPI_DeInit) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_MspDeInit) for HAL_SPI_MspDeInit
+ stm32f4xx_hal_spi.o(i.HAL_SPI_IRQHandler) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort_IT) for HAL_DMA_Abort_IT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_IRQHandler) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.HAL_SPI_IRQHandler) refers to stm32f4xx_hal_spi.o(i.SPI_DMAAbortOnError) for SPI_DMAAbortOnError
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Init) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_MspInit) for HAL_SPI_MspInit
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive) for HAL_SPI_TransmitReceive
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive) refers to stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) for SPI_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_DMA) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_DMA) for HAL_SPI_TransmitReceive_DMA
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMAHalfReceiveCplt) for SPI_DMAHalfReceiveCplt
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMAReceiveCplt) for SPI_DMAReceiveCplt
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMAError) for SPI_DMAError
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_IT) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_IT) for HAL_SPI_TransmitReceive_IT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_IT) refers to stm32f4xx_hal_spi.o(i.SPI_RxISR_16BIT) for SPI_RxISR_16BIT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_IT) refers to stm32f4xx_hal_spi.o(i.SPI_RxISR_8BIT) for SPI_RxISR_8BIT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit) refers to stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) for SPI_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive) refers to stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) for SPI_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMAHalfTransmitReceiveCplt) for SPI_DMAHalfTransmitReceiveCplt
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMATransmitReceiveCplt) for SPI_DMATransmitReceiveCplt
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMAError) for SPI_DMAError
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMAHalfReceiveCplt) for SPI_DMAHalfReceiveCplt
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMAReceiveCplt) for SPI_DMAReceiveCplt
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_IT) refers to stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_16BIT) for SPI_2linesRxISR_16BIT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_IT) refers to stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_8BIT) for SPI_2linesRxISR_8BIT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_IT) refers to stm32f4xx_hal_spi.o(i.SPI_2linesTxISR_16BIT) for SPI_2linesTxISR_16BIT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_IT) refers to stm32f4xx_hal_spi.o(i.SPI_2linesTxISR_8BIT) for SPI_2linesTxISR_8BIT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMAHalfTransmitCplt) for SPI_DMAHalfTransmitCplt
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMATransmitCplt) for SPI_DMATransmitCplt
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit_DMA) refers to stm32f4xx_hal_spi.o(i.SPI_DMAError) for SPI_DMAError
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit_IT) refers to stm32f4xx_hal_spi.o(i.SPI_TxISR_16BIT) for SPI_TxISR_16BIT
+ stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit_IT) refers to stm32f4xx_hal_spi.o(i.SPI_TxISR_8BIT) for SPI_TxISR_8BIT
+ stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_16BIT) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) for SPI_CloseRxTx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_16BIT) refers to stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_16BITCRC) for SPI_2linesRxISR_16BITCRC
+ stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_16BITCRC) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) for SPI_CloseRxTx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_8BIT) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) for SPI_CloseRxTx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_8BIT) refers to stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_8BITCRC) for SPI_2linesRxISR_8BITCRC
+ stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_8BITCRC) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) for SPI_CloseRxTx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_2linesTxISR_16BIT) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) for SPI_CloseRxTx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_2linesTxISR_8BIT) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) for SPI_CloseRxTx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) refers to stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) for SPI_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TxRxCpltCallback) for HAL_SPI_TxRxCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_RxCpltCallback) for HAL_SPI_RxCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_spi.o(i.SPI_CloseRx_ISR) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.SPI_CloseRx_ISR) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_RxCpltCallback) for HAL_SPI_RxCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMAAbortOnError) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMAError) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMAHalfReceiveCplt) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_RxHalfCpltCallback) for HAL_SPI_RxHalfCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMAHalfTransmitCplt) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TxHalfCpltCallback) for HAL_SPI_TxHalfCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMAHalfTransmitReceiveCplt) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TxRxHalfCpltCallback) for HAL_SPI_TxRxHalfCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMAReceiveCplt) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_spi.o(i.SPI_DMAReceiveCplt) refers to stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) for SPI_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_spi.o(i.SPI_DMAReceiveCplt) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMAReceiveCplt) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_RxCpltCallback) for HAL_SPI_RxCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMATransmitCplt) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_spi.o(i.SPI_DMATransmitCplt) refers to stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) for SPI_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_spi.o(i.SPI_DMATransmitCplt) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMATransmitCplt) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TxCpltCallback) for HAL_SPI_TxCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMATransmitReceiveCplt) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_spi.o(i.SPI_DMATransmitReceiveCplt) refers to stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) for SPI_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_spi.o(i.SPI_DMATransmitReceiveCplt) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.SPI_DMATransmitReceiveCplt) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TxRxCpltCallback) for HAL_SPI_TxRxCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_RxISR_16BIT) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRx_ISR) for SPI_CloseRx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_RxISR_16BIT) refers to stm32f4xx_hal_spi.o(i.SPI_RxISR_16BITCRC) for SPI_RxISR_16BITCRC
+ stm32f4xx_hal_spi.o(i.SPI_RxISR_16BITCRC) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRx_ISR) for SPI_CloseRx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_RxISR_8BIT) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRx_ISR) for SPI_CloseRx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_RxISR_8BIT) refers to stm32f4xx_hal_spi.o(i.SPI_RxISR_8BITCRC) for SPI_RxISR_8BITCRC
+ stm32f4xx_hal_spi.o(i.SPI_RxISR_8BITCRC) refers to stm32f4xx_hal_spi.o(i.SPI_CloseRx_ISR) for SPI_CloseRx_ISR
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_16BIT) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_16BIT) refers to stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) for SPI_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_16BIT) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_16BIT) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TxCpltCallback) for HAL_SPI_TxCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_16BIT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_8BIT) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_8BIT) refers to stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) for SPI_WaitFlagStateUntilTimeout
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_8BIT) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback) for HAL_SPI_ErrorCallback
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_8BIT) refers to stm32f4xx_hal_spi.o(i.HAL_SPI_TxCpltCallback) for HAL_SPI_TxCpltCallback
+ stm32f4xx_hal_spi.o(i.SPI_TxISR_8BIT) refers to system_stm32f4xx.o(.data) for SystemCoreClock
+ stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Base_DeInit) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_Base_MspDeInit) for HAL_TIM_Base_MspDeInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Init) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_Base_MspInit) for HAL_TIM_Base_MspInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Init) refers to stm32f4xx_hal_tim.o(i.TIM_Base_SetConfig) for TIM_Base_SetConfig
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Start_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAPeriodElapsedCplt) for TIM_DMAPeriodElapsedCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_ReadStart) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_ReadStart) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_ReadStart) refers to stm32f4xx_hal_tim.o(i.TIM_DMACaptureCplt) for TIM_DMACaptureCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_ReadStart) refers to stm32f4xx_hal_tim.o(i.TIM_DMAPeriodElapsedCplt) for TIM_DMAPeriodElapsedCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_ReadStart) refers to stm32f4xx_hal_tim_ex.o(i.TIMEx_DMACommutationCplt) for TIMEx_DMACommutationCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_ReadStart) refers to stm32f4xx_hal_tim.o(i.TIM_DMATriggerCplt) for TIM_DMATriggerCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_ReadStop) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_WriteStart) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_WriteStart) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_WriteStart) refers to stm32f4xx_hal_tim.o(i.TIM_DMADelayPulseCplt) for TIM_DMADelayPulseCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_WriteStart) refers to stm32f4xx_hal_tim.o(i.TIM_DMAPeriodElapsedCplt) for TIM_DMAPeriodElapsedCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_WriteStart) refers to stm32f4xx_hal_tim_ex.o(i.TIMEx_DMACommutationCplt) for TIMEx_DMACommutationCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_WriteStart) refers to stm32f4xx_hal_tim.o(i.TIM_DMATriggerCplt) for TIM_DMATriggerCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_WriteStop) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_DeInit) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_MspDeInit) for HAL_TIM_Encoder_MspDeInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Init) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_MspInit) for HAL_TIM_Encoder_MspInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Init) refers to stm32f4xx_hal_tim.o(i.TIM_Base_SetConfig) for TIM_Base_SetConfig
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Start_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMACaptureCplt) for TIM_DMACaptureCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IC_DeInit) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_IC_MspDeInit) for HAL_TIM_IC_MspDeInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Init) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_IC_MspInit) for HAL_TIM_IC_MspInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Init) refers to stm32f4xx_hal_tim.o(i.TIM_Base_SetConfig) for TIM_Base_SetConfig
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Start_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMACaptureCplt) for TIM_DMACaptureCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IRQHandler) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_IC_CaptureCallback) for HAL_TIM_IC_CaptureCallback
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IRQHandler) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_OC_DelayElapsedCallback) for HAL_TIM_OC_DelayElapsedCallback
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IRQHandler) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_PulseFinishedCallback) for HAL_TIM_PWM_PulseFinishedCallback
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IRQHandler) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_PeriodElapsedCallback) for HAL_TIM_PeriodElapsedCallback
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IRQHandler) refers to stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_BreakCallback) for HAL_TIMEx_BreakCallback
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IRQHandler) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_TriggerCallback) for HAL_TIM_TriggerCallback
+ stm32f4xx_hal_tim.o(i.HAL_TIM_IRQHandler) refers to stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_CommutationCallback) for HAL_TIMEx_CommutationCallback
+ stm32f4xx_hal_tim.o(i.HAL_TIM_OC_DeInit) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_OC_MspDeInit) for HAL_TIM_OC_MspDeInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Init) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_OC_MspInit) for HAL_TIM_OC_MspInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Init) refers to stm32f4xx_hal_tim.o(i.TIM_Base_SetConfig) for TIM_Base_SetConfig
+ stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Start_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMADelayPulseCplt) for TIM_DMADelayPulseCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_DeInit) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_MspDeInit) for HAL_TIM_OnePulse_MspDeInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_Init) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_MspInit) for HAL_TIM_OnePulse_MspInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_Init) refers to stm32f4xx_hal_tim.o(i.TIM_Base_SetConfig) for TIM_Base_SetConfig
+ stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_DeInit) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_MspDeInit) for HAL_TIM_PWM_MspDeInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Init) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_MspInit) for HAL_TIM_PWM_MspInit
+ stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Init) refers to stm32f4xx_hal_tim.o(i.TIM_Base_SetConfig) for TIM_Base_SetConfig
+ stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Start_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMADelayPulseCplt) for TIM_DMADelayPulseCplt
+ stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim.o(i.HAL_TIM_SlaveConfigSynchronization) refers to stm32f4xx_hal_tim.o(i.TIM_SlaveTimer_SetConfig) for TIM_SlaveTimer_SetConfig
+ stm32f4xx_hal_tim.o(i.HAL_TIM_SlaveConfigSynchronization_IT) refers to stm32f4xx_hal_tim.o(i.TIM_SlaveTimer_SetConfig) for TIM_SlaveTimer_SetConfig
+ stm32f4xx_hal_tim.o(i.TIM_DMACaptureCplt) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_IC_CaptureCallback) for HAL_TIM_IC_CaptureCallback
+ stm32f4xx_hal_tim.o(i.TIM_DMADelayPulseCplt) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_PulseFinishedCallback) for HAL_TIM_PWM_PulseFinishedCallback
+ stm32f4xx_hal_tim.o(i.TIM_DMAError) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_ErrorCallback) for HAL_TIM_ErrorCallback
+ stm32f4xx_hal_tim.o(i.TIM_DMAPeriodElapsedCplt) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_PeriodElapsedCallback) for HAL_TIM_PeriodElapsedCallback
+ stm32f4xx_hal_tim.o(i.TIM_DMATriggerCplt) refers to stm32f4xx_hal_tim.o(i.HAL_TIM_TriggerCallback) for HAL_TIM_TriggerCallback
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_ConfigCommutationEvent_DMA) refers to stm32f4xx_hal_tim_ex.o(i.TIMEx_DMACommutationCplt) for TIMEx_DMACommutationCplt
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_ConfigCommutationEvent_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_DeInit) refers to stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_MspDeInit) for HAL_TIMEx_HallSensor_MspDeInit
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Init) refers to stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_MspInit) for HAL_TIMEx_HallSensor_MspInit
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Init) refers to stm32f4xx_hal_tim.o(i.TIM_Base_SetConfig) for TIM_Base_SetConfig
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Init) refers to stm32f4xx_hal_tim.o(i.TIM_TI1_SetConfig) for TIM_TI1_SetConfig
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Init) refers to stm32f4xx_hal_tim.o(i.TIM_OC2_SetConfig) for TIM_OC2_SetConfig
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Start) refers to stm32f4xx_hal_tim.o(i.TIM_CCxChannelCmd) for TIM_CCxChannelCmd
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_CCxChannelCmd) for TIM_CCxChannelCmd
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Start_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMACaptureCplt) for TIM_DMACaptureCplt
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Start_IT) refers to stm32f4xx_hal_tim.o(i.TIM_CCxChannelCmd) for TIM_CCxChannelCmd
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Stop) refers to stm32f4xx_hal_tim.o(i.TIM_CCxChannelCmd) for TIM_CCxChannelCmd
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Stop_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_CCxChannelCmd) for TIM_CCxChannelCmd
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Stop_IT) refers to stm32f4xx_hal_tim.o(i.TIM_CCxChannelCmd) for TIM_CCxChannelCmd
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OCN_Start_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OCN_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMADelayPulseCplt) for TIM_DMADelayPulseCplt
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OCN_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Start_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMADelayPulseCplt) for TIM_DMADelayPulseCplt
+ stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Start_DMA) refers to stm32f4xx_hal_tim.o(i.TIM_DMAError) for TIM_DMAError
+ stm32f4xx_hal_tim_ex.o(i.TIMEx_DMACommutationCplt) refers to stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_CommutationCallback) for HAL_TIMEx_CommutationCallback
+ stm32f4xx_hal_uart.o(i.HAL_HalfDuplex_Init) refers to stm32f4xx_hal_uart.o(i.HAL_UART_MspInit) for HAL_UART_MspInit
+ stm32f4xx_hal_uart.o(i.HAL_HalfDuplex_Init) refers to stm32f4xx_hal_uart.o(i.UART_SetConfig) for UART_SetConfig
+ stm32f4xx_hal_uart.o(i.HAL_LIN_Init) refers to stm32f4xx_hal_uart.o(i.HAL_UART_MspInit) for HAL_UART_MspInit
+ stm32f4xx_hal_uart.o(i.HAL_LIN_Init) refers to stm32f4xx_hal_uart.o(i.UART_SetConfig) for UART_SetConfig
+ stm32f4xx_hal_uart.o(i.HAL_MultiProcessor_Init) refers to stm32f4xx_hal_uart.o(i.HAL_UART_MspInit) for HAL_UART_MspInit
+ stm32f4xx_hal_uart.o(i.HAL_MultiProcessor_Init) refers to stm32f4xx_hal_uart.o(i.UART_SetConfig) for UART_SetConfig
+ stm32f4xx_hal_uart.o(i.HAL_UART_DMAStop) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_uart.o(i.HAL_UART_DeInit) refers to stm32f4xx_hal_uart.o(i.HAL_UART_MspDeInit) for HAL_UART_MspDeInit
+ stm32f4xx_hal_uart.o(i.HAL_UART_IRQHandler) refers to stm32f4xx_hal_uart.o(i.HAL_UART_RxCpltCallback) for HAL_UART_RxCpltCallback
+ stm32f4xx_hal_uart.o(i.HAL_UART_IRQHandler) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort_IT) for HAL_DMA_Abort_IT
+ stm32f4xx_hal_uart.o(i.HAL_UART_IRQHandler) refers to serial_api.o(i.HAL_UART_ErrorCallback) for HAL_UART_ErrorCallback
+ stm32f4xx_hal_uart.o(i.HAL_UART_IRQHandler) refers to serial_api.o(i.HAL_UART_TxCpltCallback) for HAL_UART_TxCpltCallback
+ stm32f4xx_hal_uart.o(i.HAL_UART_IRQHandler) refers to stm32f4xx_hal_uart.o(i.UART_DMAAbortOnError) for UART_DMAAbortOnError
+ stm32f4xx_hal_uart.o(i.HAL_UART_Init) refers to stm32f4xx_hal_uart.o(i.HAL_UART_MspInit) for HAL_UART_MspInit
+ stm32f4xx_hal_uart.o(i.HAL_UART_Init) refers to stm32f4xx_hal_uart.o(i.UART_SetConfig) for UART_SetConfig
+ stm32f4xx_hal_uart.o(i.HAL_UART_Receive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_uart.o(i.HAL_UART_Receive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_uart.o(i.HAL_UART_Receive_DMA) refers to stm32f4xx_hal_uart.o(i.UART_DMAReceiveCplt) for UART_DMAReceiveCplt
+ stm32f4xx_hal_uart.o(i.HAL_UART_Receive_DMA) refers to stm32f4xx_hal_uart.o(i.UART_DMARxHalfCplt) for UART_DMARxHalfCplt
+ stm32f4xx_hal_uart.o(i.HAL_UART_Receive_DMA) refers to stm32f4xx_hal_uart.o(i.UART_DMAError) for UART_DMAError
+ stm32f4xx_hal_uart.o(i.HAL_UART_Transmit) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_uart.o(i.HAL_UART_Transmit) refers to stm32f4xx_hal_uart.o(i.UART_WaitOnFlagUntilTimeout) for UART_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_uart.o(i.HAL_UART_Transmit_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_uart.o(i.HAL_UART_Transmit_DMA) refers to stm32f4xx_hal_uart.o(i.UART_DMATransmitCplt) for UART_DMATransmitCplt
+ stm32f4xx_hal_uart.o(i.HAL_UART_Transmit_DMA) refers to stm32f4xx_hal_uart.o(i.UART_DMATxHalfCplt) for UART_DMATxHalfCplt
+ stm32f4xx_hal_uart.o(i.HAL_UART_Transmit_DMA) refers to stm32f4xx_hal_uart.o(i.UART_DMAError) for UART_DMAError
+ stm32f4xx_hal_uart.o(i.UART_DMAAbortOnError) refers to serial_api.o(i.HAL_UART_ErrorCallback) for HAL_UART_ErrorCallback
+ stm32f4xx_hal_uart.o(i.UART_DMAError) refers to serial_api.o(i.HAL_UART_ErrorCallback) for HAL_UART_ErrorCallback
+ stm32f4xx_hal_uart.o(i.UART_DMAReceiveCplt) refers to stm32f4xx_hal_uart.o(i.HAL_UART_RxCpltCallback) for HAL_UART_RxCpltCallback
+ stm32f4xx_hal_uart.o(i.UART_DMARxHalfCplt) refers to stm32f4xx_hal_uart.o(i.HAL_UART_RxHalfCpltCallback) for HAL_UART_RxHalfCpltCallback
+ stm32f4xx_hal_uart.o(i.UART_DMATransmitCplt) refers to serial_api.o(i.HAL_UART_TxCpltCallback) for HAL_UART_TxCpltCallback
+ stm32f4xx_hal_uart.o(i.UART_DMATxHalfCplt) refers to stm32f4xx_hal_uart.o(i.HAL_UART_TxHalfCpltCallback) for HAL_UART_TxHalfCpltCallback
+ stm32f4xx_hal_uart.o(i.UART_SetConfig) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq) for HAL_RCC_GetPCLK2Freq
+ stm32f4xx_hal_uart.o(i.UART_SetConfig) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq) for HAL_RCC_GetPCLK1Freq
+ stm32f4xx_hal_uart.o(i.UART_WaitOnFlagUntilTimeout) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_usart.o(i.HAL_USART_DMAStop) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort) for HAL_DMA_Abort
+ stm32f4xx_hal_usart.o(i.HAL_USART_DeInit) refers to stm32f4xx_hal_usart.o(i.HAL_USART_MspDeInit) for HAL_USART_MspDeInit
+ stm32f4xx_hal_usart.o(i.HAL_USART_IRQHandler) refers to stm32f4xx_hal_usart.o(i.USART_TransmitReceive_IT) for USART_TransmitReceive_IT
+ stm32f4xx_hal_usart.o(i.HAL_USART_IRQHandler) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Abort_IT) for HAL_DMA_Abort_IT
+ stm32f4xx_hal_usart.o(i.HAL_USART_IRQHandler) refers to stm32f4xx_hal_usart.o(i.USART_Receive_IT) for USART_Receive_IT
+ stm32f4xx_hal_usart.o(i.HAL_USART_IRQHandler) refers to stm32f4xx_hal_usart.o(i.HAL_USART_ErrorCallback) for HAL_USART_ErrorCallback
+ stm32f4xx_hal_usart.o(i.HAL_USART_IRQHandler) refers to stm32f4xx_hal_usart.o(i.HAL_USART_TxCpltCallback) for HAL_USART_TxCpltCallback
+ stm32f4xx_hal_usart.o(i.HAL_USART_IRQHandler) refers to stm32f4xx_hal_usart.o(i.USART_DMAAbortOnError) for USART_DMAAbortOnError
+ stm32f4xx_hal_usart.o(i.HAL_USART_Init) refers to stm32f4xx_hal_usart.o(i.HAL_USART_MspInit) for HAL_USART_MspInit
+ stm32f4xx_hal_usart.o(i.HAL_USART_Init) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq) for HAL_RCC_GetPCLK1Freq
+ stm32f4xx_hal_usart.o(i.HAL_USART_Init) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq) for HAL_RCC_GetPCLK2Freq
+ stm32f4xx_hal_usart.o(i.HAL_USART_Receive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_usart.o(i.HAL_USART_Receive) refers to stm32f4xx_hal_usart.o(i.USART_WaitOnFlagUntilTimeout) for USART_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_usart.o(i.HAL_USART_Receive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_usart.o(i.HAL_USART_Receive_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMAReceiveCplt) for USART_DMAReceiveCplt
+ stm32f4xx_hal_usart.o(i.HAL_USART_Receive_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMARxHalfCplt) for USART_DMARxHalfCplt
+ stm32f4xx_hal_usart.o(i.HAL_USART_Receive_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMAError) for USART_DMAError
+ stm32f4xx_hal_usart.o(i.HAL_USART_Transmit) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_usart.o(i.HAL_USART_Transmit) refers to stm32f4xx_hal_usart.o(i.USART_WaitOnFlagUntilTimeout) for USART_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive) refers to stm32f4xx_hal_usart.o(i.USART_WaitOnFlagUntilTimeout) for USART_WaitOnFlagUntilTimeout
+ stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMAReceiveCplt) for USART_DMAReceiveCplt
+ stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMARxHalfCplt) for USART_DMARxHalfCplt
+ stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMATransmitCplt) for USART_DMATransmitCplt
+ stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMATxHalfCplt) for USART_DMATxHalfCplt
+ stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMAError) for USART_DMAError
+ stm32f4xx_hal_usart.o(i.HAL_USART_Transmit_DMA) refers to stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT) for HAL_DMA_Start_IT
+ stm32f4xx_hal_usart.o(i.HAL_USART_Transmit_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMATransmitCplt) for USART_DMATransmitCplt
+ stm32f4xx_hal_usart.o(i.HAL_USART_Transmit_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMATxHalfCplt) for USART_DMATxHalfCplt
+ stm32f4xx_hal_usart.o(i.HAL_USART_Transmit_DMA) refers to stm32f4xx_hal_usart.o(i.USART_DMAError) for USART_DMAError
+ stm32f4xx_hal_usart.o(i.USART_DMAAbortOnError) refers to stm32f4xx_hal_usart.o(i.HAL_USART_ErrorCallback) for HAL_USART_ErrorCallback
+ stm32f4xx_hal_usart.o(i.USART_DMAError) refers to stm32f4xx_hal_usart.o(i.HAL_USART_ErrorCallback) for HAL_USART_ErrorCallback
+ stm32f4xx_hal_usart.o(i.USART_DMAReceiveCplt) refers to stm32f4xx_hal_usart.o(i.HAL_USART_TxRxCpltCallback) for HAL_USART_TxRxCpltCallback
+ stm32f4xx_hal_usart.o(i.USART_DMAReceiveCplt) refers to stm32f4xx_hal_usart.o(i.HAL_USART_RxCpltCallback) for HAL_USART_RxCpltCallback
+ stm32f4xx_hal_usart.o(i.USART_DMARxHalfCplt) refers to stm32f4xx_hal_usart.o(i.HAL_USART_RxHalfCpltCallback) for HAL_USART_RxHalfCpltCallback
+ stm32f4xx_hal_usart.o(i.USART_DMATransmitCplt) refers to stm32f4xx_hal_usart.o(i.HAL_USART_TxCpltCallback) for HAL_USART_TxCpltCallback
+ stm32f4xx_hal_usart.o(i.USART_DMATxHalfCplt) refers to stm32f4xx_hal_usart.o(i.HAL_USART_TxHalfCpltCallback) for HAL_USART_TxHalfCpltCallback
+ stm32f4xx_hal_usart.o(i.USART_Receive_IT) refers to stm32f4xx_hal_usart.o(i.HAL_USART_RxCpltCallback) for HAL_USART_RxCpltCallback
+ stm32f4xx_hal_usart.o(i.USART_TransmitReceive_IT) refers to stm32f4xx_hal_usart.o(i.HAL_USART_TxRxCpltCallback) for HAL_USART_TxRxCpltCallback
+ stm32f4xx_hal_usart.o(i.USART_WaitOnFlagUntilTimeout) refers to stm32f4xx_hal.o(i.HAL_GetTick) for HAL_GetTick
+ stm32f4xx_hal_wwdg.o(i.HAL_WWDG_IRQHandler) refers to stm32f4xx_hal_wwdg.o(i.HAL_WWDG_EarlyWakeupCallback) for HAL_WWDG_EarlyWakeupCallback
+ stm32f4xx_hal_wwdg.o(i.HAL_WWDG_Init) refers to stm32f4xx_hal_wwdg.o(i.HAL_WWDG_MspInit) for HAL_WWDG_MspInit
+ stm32f4xx_ll_usb.o(i.USB_ActivateDedicatedEndpoint) refers to stm32f4xx_ll_usb.o(.data) for .data
+ stm32f4xx_ll_usb.o(i.USB_DevConnect) refers to mbed_overrides.o(i.HAL_Delay) for HAL_Delay
+ stm32f4xx_ll_usb.o(i.USB_DevDisconnect) refers to mbed_overrides.o(i.HAL_Delay) for HAL_Delay
+ stm32f4xx_ll_usb.o(i.USB_HC_StartXfer) refers to stm32f4xx_ll_usb.o(i.USB_DoPing) for USB_DoPing
+ stm32f4xx_ll_usb.o(i.USB_HostInit) refers to mbed_overrides.o(i.HAL_Delay) for HAL_Delay
+ stm32f4xx_ll_usb.o(i.USB_ResetPort) refers to mbed_overrides.o(i.HAL_Delay) for HAL_Delay
+ stm32f4xx_ll_usb.o(i.USB_SetCurrentMode) refers to mbed_overrides.o(i.HAL_Delay) for HAL_Delay
+ us_ticker.o(i.us_ticker_clear_interrupt) refers to us_ticker.o(.bss) for .bss
+ us_ticker.o(i.us_ticker_disable_interrupt) refers to us_ticker.o(.bss) for .bss
+ us_ticker.o(i.us_ticker_init) refers to hal_tick.o(i.HAL_InitTick) for HAL_InitTick
+ us_ticker.o(i.us_ticker_init) refers to us_ticker.o(.data) for .data
+ us_ticker.o(i.us_ticker_init) refers to us_ticker.o(.bss) for .bss
+ us_ticker.o(i.us_ticker_read) refers to hal_tick.o(i.HAL_InitTick) for HAL_InitTick
+ us_ticker.o(i.us_ticker_read) refers to us_ticker.o(.data) for .data
+ us_ticker.o(i.us_ticker_read) refers to us_ticker.o(.bss) for .bss
+ us_ticker.o(i.us_ticker_set_interrupt) refers to us_ticker.o(.bss) for .bss
+ startup_stm32f401xe.o(RESET) refers to startup_stm32f401xe.o(.text) for Reset_Handler
+ startup_stm32f401xe.o(.text) refers to system_stm32f4xx.o(i.SystemInit) for SystemInit
+ startup_stm32f401xe.o(.text) refers to __main.o(!!!main) for __main
+ sys.o(.ARM.exidx) refers to sys.o(i.__user_setup_stackheap) for i.__user_setup_stackheap
+ busin.o(i._ZN4mbed5BusIn4modeE7PinMode) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ busin.o(i._ZN4mbed5BusIn4modeE7PinMode) refers to gpio_api.o(i.gpio_mode) for gpio_mode
+ busin.o(i._ZN4mbed5BusIn4modeE7PinMode) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ busin.o(i._ZN4mbed5BusIn4readEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ busin.o(i._ZN4mbed5BusInC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ busin.o(i._ZN4mbed5BusInC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) refers to mbed_gpio.o(i.gpio_init_in) for gpio_init_in
+ busin.o(i._ZN4mbed5BusInC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) refers to busin.o(.constdata__ZTVN4mbed5BusInE) for vtable for mbed::BusIn
+ busin.o(i._ZN4mbed5BusInC1EP7PinName) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ busin.o(i._ZN4mbed5BusInC1EP7PinName) refers to mbed_gpio.o(i.gpio_init_in) for gpio_init_in
+ busin.o(i._ZN4mbed5BusInC1EP7PinName) refers to busin.o(.constdata__ZTVN4mbed5BusInE) for vtable for mbed::BusIn
+ busin.o(i._ZN4mbed5BusInD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ busin.o(i._ZN4mbed5BusInD0Ev) refers to busin.o(.constdata__ZTVN4mbed5BusInE) for vtable for mbed::BusIn
+ busin.o(i._ZN4mbed5BusInD1Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ busin.o(i._ZN4mbed5BusInD1Ev) refers to busin.o(.constdata__ZTVN4mbed5BusInE) for vtable for mbed::BusIn
+ busin.o(i._ZN4mbed5BusIncviEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ busin.o(i._ZN4mbed5BusIncviEv) refers to busin.o(i._ZN4mbed5BusIn4readEv) for i._ZN4mbed5BusIn4readEv
+ busin.o(i._ZN4mbed5BusInixEi) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusInC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) for i._ZN4mbed5BusInC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusInC1EP7PinName) for i._ZN4mbed5BusInC1EP7PinName
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusInD1Ev) for i._ZN4mbed5BusInD1Ev
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusInD0Ev) for i._ZN4mbed5BusInD0Ev
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusIn4readEv) for i._ZN4mbed5BusIn4readEv
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusIn4modeE7PinMode) for i._ZN4mbed5BusIn4modeE7PinMode
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusIncviEv) for i._ZN4mbed5BusIncviEv
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusInixEi) for i._ZN4mbed5BusInixEi
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusIn4lockEv) for i._ZN4mbed5BusIn4lockEv
+ busin.o(.ARM.exidx) refers to busin.o(i._ZN4mbed5BusIn6unlockEv) for i._ZN4mbed5BusIn6unlockEv
+ businout.o(i._ZN4mbed8BusInOut4modeE7PinMode) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ businout.o(i._ZN4mbed8BusInOut4modeE7PinMode) refers to gpio_api.o(i.gpio_mode) for gpio_mode
+ businout.o(i._ZN4mbed8BusInOut4modeE7PinMode) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ businout.o(i._ZN4mbed8BusInOut4readEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ businout.o(i._ZN4mbed8BusInOut4readEv) refers to businout.o(i._ZN4mbed8BusInOut5writeEi) for i._ZN4mbed8BusInOut5writeEi
+ businout.o(i._ZN4mbed8BusInOut5inputEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ businout.o(i._ZN4mbed8BusInOut5inputEv) refers to gpio_api.o(i.gpio_dir) for gpio_dir
+ businout.o(i._ZN4mbed8BusInOut5inputEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ businout.o(i._ZN4mbed8BusInOut5writeEi) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ businout.o(i._ZN4mbed8BusInOut6outputEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ businout.o(i._ZN4mbed8BusInOut6outputEv) refers to gpio_api.o(i.gpio_dir) for gpio_dir
+ businout.o(i._ZN4mbed8BusInOut6outputEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ businout.o(i._ZN4mbed8BusInOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ businout.o(i._ZN4mbed8BusInOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) refers to mbed_gpio.o(i.gpio_init_in) for gpio_init_in
+ businout.o(i._ZN4mbed8BusInOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) refers to businout.o(.constdata__ZTVN4mbed8BusInOutE) for vtable for mbed::BusInOut
+ businout.o(i._ZN4mbed8BusInOutC1EP7PinName) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ businout.o(i._ZN4mbed8BusInOutC1EP7PinName) refers to mbed_gpio.o(i.gpio_init_in) for gpio_init_in
+ businout.o(i._ZN4mbed8BusInOutC1EP7PinName) refers to businout.o(.constdata__ZTVN4mbed8BusInOutE) for vtable for mbed::BusInOut
+ businout.o(i._ZN4mbed8BusInOutD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ businout.o(i._ZN4mbed8BusInOutD0Ev) refers to businout.o(.constdata__ZTVN4mbed8BusInOutE) for vtable for mbed::BusInOut
+ businout.o(i._ZN4mbed8BusInOutD1Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ businout.o(i._ZN4mbed8BusInOutD1Ev) refers to businout.o(.constdata__ZTVN4mbed8BusInOutE) for vtable for mbed::BusInOut
+ businout.o(i._ZN4mbed8BusInOutaSERS0_) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ businout.o(i._ZN4mbed8BusInOutaSERS0_) refers to businout.o(i._ZN4mbed8BusInOut5writeEi) for i._ZN4mbed8BusInOut5writeEi
+ businout.o(i._ZN4mbed8BusInOutaSEi) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ businout.o(i._ZN4mbed8BusInOutaSEi) refers to businout.o(i._ZN4mbed8BusInOut5writeEi) for i._ZN4mbed8BusInOut5writeEi
+ businout.o(i._ZN4mbed8BusInOutcviEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ businout.o(i._ZN4mbed8BusInOutcviEv) refers to businout.o(i._ZN4mbed8BusInOut5writeEi) for i._ZN4mbed8BusInOut5writeEi
+ businout.o(i._ZN4mbed8BusInOutixEi) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) for i._ZN4mbed8BusInOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOutC1EP7PinName) for i._ZN4mbed8BusInOutC1EP7PinName
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOutD1Ev) for i._ZN4mbed8BusInOutD1Ev
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOutD0Ev) for i._ZN4mbed8BusInOutD0Ev
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOut5writeEi) for i._ZN4mbed8BusInOut5writeEi
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOut4readEv) for i._ZN4mbed8BusInOut4readEv
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOut6outputEv) for i._ZN4mbed8BusInOut6outputEv
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOut5inputEv) for i._ZN4mbed8BusInOut5inputEv
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOut4modeE7PinMode) for i._ZN4mbed8BusInOut4modeE7PinMode
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOutaSEi) for i._ZN4mbed8BusInOutaSEi
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOutaSERS0_) for i._ZN4mbed8BusInOutaSERS0_
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOutixEi) for i._ZN4mbed8BusInOutixEi
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOutcviEv) for i._ZN4mbed8BusInOutcviEv
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOut4lockEv) for i._ZN4mbed8BusInOut4lockEv
+ businout.o(.ARM.exidx) refers to businout.o(i._ZN4mbed8BusInOut6unlockEv) for i._ZN4mbed8BusInOut6unlockEv
+ busout.o(i._ZN4mbed6BusOut4readEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ busout.o(i._ZN4mbed6BusOut4readEv) refers to busout.o(i._ZN4mbed6BusOut5writeEi) for i._ZN4mbed6BusOut5writeEi
+ busout.o(i._ZN4mbed6BusOut5writeEi) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ busout.o(i._ZN4mbed6BusOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ busout.o(i._ZN4mbed6BusOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) refers to mbed_gpio.o(i.gpio_init_out) for gpio_init_out
+ busout.o(i._ZN4mbed6BusOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) refers to busout.o(.constdata__ZTVN4mbed6BusOutE) for vtable for mbed::BusOut
+ busout.o(i._ZN4mbed6BusOutC1EP7PinName) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ busout.o(i._ZN4mbed6BusOutC1EP7PinName) refers to mbed_gpio.o(i.gpio_init_out) for gpio_init_out
+ busout.o(i._ZN4mbed6BusOutC1EP7PinName) refers to busout.o(.constdata__ZTVN4mbed6BusOutE) for vtable for mbed::BusOut
+ busout.o(i._ZN4mbed6BusOutD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ busout.o(i._ZN4mbed6BusOutD0Ev) refers to busout.o(.constdata__ZTVN4mbed6BusOutE) for vtable for mbed::BusOut
+ busout.o(i._ZN4mbed6BusOutD1Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ busout.o(i._ZN4mbed6BusOutD1Ev) refers to busout.o(.constdata__ZTVN4mbed6BusOutE) for vtable for mbed::BusOut
+ busout.o(i._ZN4mbed6BusOutaSERS0_) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ busout.o(i._ZN4mbed6BusOutaSERS0_) refers to busout.o(i._ZN4mbed6BusOut5writeEi) for i._ZN4mbed6BusOut5writeEi
+ busout.o(i._ZN4mbed6BusOutaSEi) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ busout.o(i._ZN4mbed6BusOutaSEi) refers to busout.o(i._ZN4mbed6BusOut5writeEi) for i._ZN4mbed6BusOut5writeEi
+ busout.o(i._ZN4mbed6BusOutcviEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ busout.o(i._ZN4mbed6BusOutcviEv) refers to busout.o(i._ZN4mbed6BusOut5writeEi) for i._ZN4mbed6BusOut5writeEi
+ busout.o(i._ZN4mbed6BusOutixEi) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_) for i._ZN4mbed6BusOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOutC1EP7PinName) for i._ZN4mbed6BusOutC1EP7PinName
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOutD1Ev) for i._ZN4mbed6BusOutD1Ev
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOutD0Ev) for i._ZN4mbed6BusOutD0Ev
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOut5writeEi) for i._ZN4mbed6BusOut5writeEi
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOut4readEv) for i._ZN4mbed6BusOut4readEv
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOutaSEi) for i._ZN4mbed6BusOutaSEi
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOutaSERS0_) for i._ZN4mbed6BusOutaSERS0_
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOutixEi) for i._ZN4mbed6BusOutixEi
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOutcviEv) for i._ZN4mbed6BusOutcviEv
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOut4lockEv) for i._ZN4mbed6BusOut4lockEv
+ busout.o(.ARM.exidx) refers to busout.o(i._ZN4mbed6BusOut6unlockEv) for i._ZN4mbed6BusOut6unlockEv
+ callchain.o(i._ZN4mbed9CallChain3addENS_8CallbackIFvvEEE) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ callchain.o(i._ZN4mbed9CallChain5clearEv) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ callchain.o(i._ZN4mbed9CallChain6removeEPNS_8CallbackIFvvEEE) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ callchain.o(i._ZN4mbed9CallChain9add_frontENS_8CallbackIFvvEEE) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ callchain.o(i._ZN4mbed9CallChainC1Ei) refers to callchain.o(.constdata__ZTVN4mbed9CallChainE) for vtable for mbed::CallChain
+ callchain.o(i._ZN4mbed9CallChainD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ callchain.o(i._ZN4mbed9CallChainD0Ev) refers to callchain.o(.constdata__ZTVN4mbed9CallChainE) for vtable for mbed::CallChain
+ callchain.o(i._ZN4mbed9CallChainD1Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ callchain.o(i._ZN4mbed9CallChainD1Ev) refers to callchain.o(.constdata__ZTVN4mbed9CallChainE) for vtable for mbed::CallChain
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZN4mbed9CallChainC1Ei) for i._ZN4mbed9CallChainC1Ei
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZN4mbed9CallChain5clearEv) for i._ZN4mbed9CallChain5clearEv
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZN4mbed9CallChainD1Ev) for i._ZN4mbed9CallChainD1Ev
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZN4mbed9CallChainD0Ev) for i._ZN4mbed9CallChainD0Ev
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZN4mbed9CallChain3addENS_8CallbackIFvvEEE) for i._ZN4mbed9CallChain3addENS_8CallbackIFvvEEE
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZN4mbed9CallChain9add_frontENS_8CallbackIFvvEEE) for i._ZN4mbed9CallChain9add_frontENS_8CallbackIFvvEEE
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZNK4mbed9CallChain4sizeEv) for i._ZNK4mbed9CallChain4sizeEv
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZNK4mbed9CallChain3getEi) for i._ZNK4mbed9CallChain3getEi
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZNK4mbed9CallChain4findEPNS_8CallbackIFvvEEE) for i._ZNK4mbed9CallChain4findEPNS_8CallbackIFvvEEE
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZN4mbed9CallChain6removeEPNS_8CallbackIFvvEEE) for i._ZN4mbed9CallChain6removeEPNS_8CallbackIFvvEEE
+ callchain.o(.ARM.exidx) refers to callchain.o(i._ZN4mbed9CallChain4callEv) for i._ZN4mbed9CallChain4callEv
+ filebase.o(i._ZN4mbed8FileBase3getEi) refers to filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv) for SingletonPtr<PlatformMutex>::operator ->()
+ filebase.o(i._ZN4mbed8FileBase3getEi) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ filebase.o(i._ZN4mbed8FileBase3getEi) refers to filebase.o(.data) for .data
+ filebase.o(i._ZN4mbed8FileBase3getEi) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ filebase.o(i._ZN4mbed8FileBase3getEi) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ filebase.o(i._ZN4mbed8FileBase6lookupEPKcj) refers to filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv) for SingletonPtr<PlatformMutex>::operator ->()
+ filebase.o(i._ZN4mbed8FileBase6lookupEPKcj) refers to strncmp.o(.text) for strncmp
+ filebase.o(i._ZN4mbed8FileBase6lookupEPKcj) refers to strlen.o(.text) for strlen
+ filebase.o(i._ZN4mbed8FileBase6lookupEPKcj) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ filebase.o(i._ZN4mbed8FileBase6lookupEPKcj) refers to filebase.o(.data) for .data
+ filebase.o(i._ZN4mbed8FileBase6lookupEPKcj) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ filebase.o(i._ZN4mbed8FileBase6lookupEPKcj) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ filebase.o(i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE) refers to filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv) for SingletonPtr<PlatformMutex>::operator ->()
+ filebase.o(i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE) refers to filebase.o(.constdata__ZTVN4mbed8FileBaseE) for vtable for mbed::FileBase
+ filebase.o(i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE) refers to filebase.o(.data) for .data
+ filebase.o(i._ZN4mbed8FileBaseD0Ev) refers to filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv) for SingletonPtr<PlatformMutex>::operator ->()
+ filebase.o(i._ZN4mbed8FileBaseD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ filebase.o(i._ZN4mbed8FileBaseD0Ev) refers to filebase.o(.constdata__ZTVN4mbed8FileBaseE) for vtable for mbed::FileBase
+ filebase.o(i._ZN4mbed8FileBaseD0Ev) refers to filebase.o(.data) for .data
+ filebase.o(i._ZN4mbed8FileBaseD1Ev) refers to filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv) for SingletonPtr<PlatformMutex>::operator ->()
+ filebase.o(i._ZN4mbed8FileBaseD1Ev) refers to filebase.o(.constdata__ZTVN4mbed8FileBaseE) for vtable for mbed::FileBase
+ filebase.o(i._ZN4mbed8FileBaseD1Ev) refers to filebase.o(.data) for .data
+ filebase.o(.ARM.exidx) refers to filebase.o(i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE) for i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE
+ filebase.o(.ARM.exidx) refers to filebase.o(i._ZN4mbed8FileBaseD1Ev) for i._ZN4mbed8FileBaseD1Ev
+ filebase.o(.ARM.exidx) refers to filebase.o(i._ZN4mbed8FileBaseD0Ev) for i._ZN4mbed8FileBaseD0Ev
+ filebase.o(.ARM.exidx) refers to filebase.o(i._ZN4mbed8FileBase7getNameEv) for i._ZN4mbed8FileBase7getNameEv
+ filebase.o(.ARM.exidx) refers to filebase.o(i._ZN4mbed8FileBase11getPathTypeEv) for i._ZN4mbed8FileBase11getPathTypeEv
+ filebase.o(.ARM.exidx) refers to filebase.o(i._ZN4mbed8FileBase6lookupEPKcj) for i._ZN4mbed8FileBase6lookupEPKcj
+ filebase.o(.ARM.exidx) refers to filebase.o(i._ZN4mbed8FileBase3getEi) for i._ZN4mbed8FileBase3getEi
+ filelike.o(i._ZN4mbed8FileLikeC2EPKc) refers to filebase.o(i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE) for mbed::FileBase::FileBase(const char*, mbed::PathType)
+ filelike.o(i._ZN4mbed8FileLikeC2EPKc) refers to retarget.o(.constdata__ZTVN4mbed10FileHandleE) for vtable for mbed::FileHandle
+ filelike.o(i._ZN4mbed8FileLikeC2EPKc) refers to filelike.o(.constdata__ZTVN4mbed8FileLikeE) for vtable for mbed::FileLike
+ filelike.o(i._ZN4mbed8FileLikeD0Ev) refers to filebase.o(i._ZN4mbed8FileBaseD1Ev) for mbed::FileBase::~FileBase()
+ filelike.o(i._ZN4mbed8FileLikeD0Ev) refers to retarget.o(i._ZN4mbed10FileHandleD2Ev) for mbed::FileHandle::~FileHandle__sub_object()
+ filelike.o(i._ZN4mbed8FileLikeD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ filelike.o(i._ZN4mbed8FileLikeD2Ev) refers to filebase.o(i._ZN4mbed8FileBaseD1Ev) for mbed::FileBase::~FileBase()
+ filelike.o(i._ZN4mbed8FileLikeD2Ev) refers to retarget.o(i._ZN4mbed10FileHandleD2Ev) for mbed::FileHandle::~FileHandle__sub_object()
+ filelike.o(i._ZThn4_N4mbed8FileLikeD0Ev) refers to filebase.o(i._ZN4mbed8FileBaseD1Ev) for mbed::FileBase::~FileBase()
+ filelike.o(i._ZThn4_N4mbed8FileLikeD0Ev) refers to retarget.o(i._ZN4mbed10FileHandleD2Ev) for mbed::FileHandle::~FileHandle__sub_object()
+ filelike.o(i._ZThn4_N4mbed8FileLikeD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ filelike.o(i._ZThn4_N4mbed8FileLikeD1Ev) refers to filebase.o(i._ZN4mbed8FileBaseD1Ev) for mbed::FileBase::~FileBase()
+ filelike.o(i._ZThn4_N4mbed8FileLikeD1Ev) refers to retarget.o(i._ZN4mbed10FileHandleD2Ev) for mbed::FileHandle::~FileHandle__sub_object()
+ filelike.o(.ARM.exidx) refers to filelike.o(i._ZN4mbed8FileLikeC2EPKc) for i._ZN4mbed8FileLikeC2EPKc
+ filelike.o(.ARM.exidx) refers to filelike.o(i._ZN4mbed8FileLikeD2Ev) for i._ZN4mbed8FileLikeD2Ev
+ filelike.o(.ARM.exidx) refers to filelike.o(i._ZN4mbed8FileLikeD0Ev) for i._ZN4mbed8FileLikeD0Ev
+ filelike.o(.ARM.exidx) refers to filelike.o(i._ZThn4_N4mbed8FileLikeD0Ev) for i._ZThn4_N4mbed8FileLikeD0Ev
+ filelike.o(.ARM.exidx) refers to filelike.o(i._ZThn4_N4mbed8FileLikeD1Ev) for i._ZThn4_N4mbed8FileLikeD1Ev
+ filepath.o(i._ZN4mbed8FilePath10fileSystemEv) refers to filebase.o(i._ZN4mbed8FileBase11getPathTypeEv) for mbed::FileBase::getPathType()
+ filepath.o(i._ZN4mbed8FilePath12isFileSystemEv) refers to filebase.o(i._ZN4mbed8FileBase11getPathTypeEv) for mbed::FileBase::getPathType()
+ filepath.o(i._ZN4mbed8FilePath4fileEv) refers to filebase.o(i._ZN4mbed8FileBase11getPathTypeEv) for mbed::FileBase::getPathType()
+ filepath.o(i._ZN4mbed8FilePath6isFileEv) refers to filebase.o(i._ZN4mbed8FileBase11getPathTypeEv) for mbed::FileBase::getPathType()
+ filepath.o(i._ZN4mbed8FilePathC1EPKc) refers to filebase.o(i._ZN4mbed8FileBase6lookupEPKcj) for mbed::FileBase::lookup(const char*, unsigned)
+ filepath.o(.ARM.exidx) refers to filepath.o(i._ZN4mbed8FilePathC1EPKc) for i._ZN4mbed8FilePathC1EPKc
+ filepath.o(.ARM.exidx) refers to filepath.o(i._ZN4mbed8FilePath8fileNameEv) for i._ZN4mbed8FilePath8fileNameEv
+ filepath.o(.ARM.exidx) refers to filepath.o(i._ZN4mbed8FilePath12isFileSystemEv) for i._ZN4mbed8FilePath12isFileSystemEv
+ filepath.o(.ARM.exidx) refers to filepath.o(i._ZN4mbed8FilePath10fileSystemEv) for i._ZN4mbed8FilePath10fileSystemEv
+ filepath.o(.ARM.exidx) refers to filepath.o(i._ZN4mbed8FilePath6isFileEv) for i._ZN4mbed8FilePath6isFileEv
+ filepath.o(.ARM.exidx) refers to filepath.o(i._ZN4mbed8FilePath4fileEv) for i._ZN4mbed8FilePath4fileEv
+ filepath.o(.ARM.exidx) refers to filepath.o(i._ZN4mbed8FilePath6existsEv) for i._ZN4mbed8FilePath6existsEv
+ filesystemlike.o(i._ZN4mbed14FileSystemLike7opendirEv) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ filesystemlike.o(i._ZN4mbed14FileSystemLike7opendirEv) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ filesystemlike.o(i._ZN4mbed14FileSystemLike7opendirEv) refers to filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) for vtable for mbed::BaseDirHandle
+ filesystemlike.o(i._ZN4mbed14FileSystemLikeC2EPKc) refers to filebase.o(i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE) for mbed::FileBase::FileBase(const char*, mbed::PathType)
+ filesystemlike.o(i._ZN4mbed14FileSystemLikeC2EPKc) refers to filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE) for vtable for mbed::FileSystemLike
+ filesystemlike.o(i._ZN4mbed14FileSystemLikeD0Ev) refers to filebase.o(i._ZN4mbed8FileBaseD1Ev) for mbed::FileBase::~FileBase()
+ filesystemlike.o(i._ZN4mbed14FileSystemLikeD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ filesystemlike.o(i._ZN4mbed14FileSystemLikeD2Ev) refers to filebase.o(i._ZN4mbed8FileBaseD1Ev) for mbed::FileBase::~FileBase()
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed14FileSystemLikeC2EPKc) for i._ZN4mbed14FileSystemLikeC2EPKc
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed14FileSystemLikeD2Ev) for i._ZN4mbed14FileSystemLikeD2Ev
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed14FileSystemLikeD0Ev) for i._ZN4mbed14FileSystemLikeD0Ev
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike7opendirEv) for i._ZN4mbed14FileSystemLike7opendirEv
+ i2c.o(i._ZN4mbed3I2C4lockEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ i2c.o(i._ZN4mbed3I2C4lockEv) refers to i2c.o(.data) for .data
+ i2c.o(i._ZN4mbed3I2C4lockEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ i2c.o(i._ZN4mbed3I2C4lockEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ i2c.o(i._ZN4mbed3I2C4readEi) refers to i2c_api.o(i.i2c_byte_read) for i2c_byte_read
+ i2c.o(i._ZN4mbed3I2C4readEiPcib) refers to i2c_api.o(i.i2c_frequency) for i2c_frequency
+ i2c.o(i._ZN4mbed3I2C4readEiPcib) refers to i2c_api.o(i.i2c_read) for i2c_read
+ i2c.o(i._ZN4mbed3I2C4readEiPcib) refers to i2c.o(.data) for .data
+ i2c.o(i._ZN4mbed3I2C4stopEv) refers to i2c_api.o(i.i2c_stop) for i2c_stop
+ i2c.o(i._ZN4mbed3I2C5startEv) refers to i2c_api.o(i.i2c_start) for i2c_start
+ i2c.o(i._ZN4mbed3I2C5writeEi) refers to i2c_api.o(i.i2c_byte_write) for i2c_byte_write
+ i2c.o(i._ZN4mbed3I2C5writeEiPKcib) refers to i2c_api.o(i.i2c_frequency) for i2c_frequency
+ i2c.o(i._ZN4mbed3I2C5writeEiPKcib) refers to i2c_api.o(i.i2c_write) for i2c_write
+ i2c.o(i._ZN4mbed3I2C5writeEiPKcib) refers to i2c.o(.data) for .data
+ i2c.o(i._ZN4mbed3I2C6aquireEv) refers to i2c_api.o(i.i2c_frequency) for i2c_frequency
+ i2c.o(i._ZN4mbed3I2C6aquireEv) refers to i2c.o(.data) for .data
+ i2c.o(i._ZN4mbed3I2C6unlockEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ i2c.o(i._ZN4mbed3I2C6unlockEv) refers to i2c.o(.data) for .data
+ i2c.o(i._ZN4mbed3I2C6unlockEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ i2c.o(i._ZN4mbed3I2C6unlockEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ i2c.o(i._ZN4mbed3I2C9frequencyEi) refers to i2c_api.o(i.i2c_frequency) for i2c_frequency
+ i2c.o(i._ZN4mbed3I2C9frequencyEi) refers to i2c.o(.data) for .data
+ i2c.o(i._ZN4mbed3I2CC1E7PinNameS1_) refers to i2c_api.o(i.i2c_init) for i2c_init
+ i2c.o(i._ZN4mbed3I2CC1E7PinNameS1_) refers to i2c.o(.constdata__ZTVN4mbed3I2CE) for vtable for mbed::I2C
+ i2c.o(i._ZN4mbed3I2CC1E7PinNameS1_) refers to i2c.o(.data) for .data
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2CC1E7PinNameS1_) for i._ZN4mbed3I2CC1E7PinNameS1_
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C9frequencyEi) for i._ZN4mbed3I2C9frequencyEi
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C6aquireEv) for i._ZN4mbed3I2C6aquireEv
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C4readEiPcib) for i._ZN4mbed3I2C4readEiPcib
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C4readEi) for i._ZN4mbed3I2C4readEi
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C5writeEiPKcib) for i._ZN4mbed3I2C5writeEiPKcib
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C5writeEi) for i._ZN4mbed3I2C5writeEi
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C5startEv) for i._ZN4mbed3I2C5startEv
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C4stopEv) for i._ZN4mbed3I2C4stopEv
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C4lockEv) for i._ZN4mbed3I2C4lockEv
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2C6unlockEv) for i._ZN4mbed3I2C6unlockEv
+ i2cslave.o(i._ZN4mbed8I2CSlave4readEPci) refers to i2c_api.o(i.i2c_slave_read) for i2c_slave_read
+ i2cslave.o(i._ZN4mbed8I2CSlave4readEv) refers to i2c_api.o(i.i2c_byte_read) for i2c_byte_read
+ i2cslave.o(i._ZN4mbed8I2CSlave4stopEv) refers to i2c_api.o(i.i2c_stop) for i2c_stop
+ i2cslave.o(i._ZN4mbed8I2CSlave5writeEPKci) refers to i2c_api.o(i.i2c_slave_write) for i2c_slave_write
+ i2cslave.o(i._ZN4mbed8I2CSlave5writeEi) refers to i2c_api.o(i.i2c_byte_write) for i2c_byte_write
+ i2cslave.o(i._ZN4mbed8I2CSlave7addressEi) refers to i2c_api.o(i.i2c_slave_address) for i2c_slave_address
+ i2cslave.o(i._ZN4mbed8I2CSlave7receiveEv) refers to i2c_api.o(i.i2c_slave_receive) for i2c_slave_receive
+ i2cslave.o(i._ZN4mbed8I2CSlave9frequencyEi) refers to i2c_api.o(i.i2c_frequency) for i2c_frequency
+ i2cslave.o(i._ZN4mbed8I2CSlaveC1E7PinNameS1_) refers to i2c_api.o(i.i2c_init) for i2c_init
+ i2cslave.o(i._ZN4mbed8I2CSlaveC1E7PinNameS1_) refers to i2c_api.o(i.i2c_frequency) for i2c_frequency
+ i2cslave.o(i._ZN4mbed8I2CSlaveC1E7PinNameS1_) refers to i2c_api.o(i.i2c_slave_mode) for i2c_slave_mode
+ i2cslave.o(.ARM.exidx) refers to i2cslave.o(i._ZN4mbed8I2CSlaveC1E7PinNameS1_) for i._ZN4mbed8I2CSlaveC1E7PinNameS1_
+ i2cslave.o(.ARM.exidx) refers to i2cslave.o(i._ZN4mbed8I2CSlave9frequencyEi) for i._ZN4mbed8I2CSlave9frequencyEi
+ i2cslave.o(.ARM.exidx) refers to i2cslave.o(i._ZN4mbed8I2CSlave7receiveEv) for i._ZN4mbed8I2CSlave7receiveEv
+ i2cslave.o(.ARM.exidx) refers to i2cslave.o(i._ZN4mbed8I2CSlave4readEPci) for i._ZN4mbed8I2CSlave4readEPci
+ i2cslave.o(.ARM.exidx) refers to i2cslave.o(i._ZN4mbed8I2CSlave4readEv) for i._ZN4mbed8I2CSlave4readEv
+ i2cslave.o(.ARM.exidx) refers to i2cslave.o(i._ZN4mbed8I2CSlave5writeEPKci) for i._ZN4mbed8I2CSlave5writeEPKci
+ i2cslave.o(.ARM.exidx) refers to i2cslave.o(i._ZN4mbed8I2CSlave5writeEi) for i._ZN4mbed8I2CSlave5writeEi
+ i2cslave.o(.ARM.exidx) refers to i2cslave.o(i._ZN4mbed8I2CSlave7addressEi) for i._ZN4mbed8I2CSlave7addressEi
+ i2cslave.o(.ARM.exidx) refers to i2cslave.o(i._ZN4mbed8I2CSlave4stopEv) for i._ZN4mbed8I2CSlave4stopEv
+ interruptin.o(i._ZN4mbed11InterruptIn10enable_irqEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ interruptin.o(i._ZN4mbed11InterruptIn10enable_irqEv) refers to gpio_irq_api.o(i.gpio_irq_enable) for gpio_irq_enable
+ interruptin.o(i._ZN4mbed11InterruptIn10enable_irqEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ interruptin.o(i._ZN4mbed11InterruptIn11disable_irqEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ interruptin.o(i._ZN4mbed11InterruptIn11disable_irqEv) refers to gpio_irq_api.o(i.gpio_irq_disable) for gpio_irq_disable
+ interruptin.o(i._ZN4mbed11InterruptIn11disable_irqEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ interruptin.o(i._ZN4mbed11InterruptIn4fallENS_8CallbackIFvvEEE) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ interruptin.o(i._ZN4mbed11InterruptIn4fallENS_8CallbackIFvvEEE) refers to gpio_irq_api.o(i.gpio_irq_set) for gpio_irq_set
+ interruptin.o(i._ZN4mbed11InterruptIn4fallENS_8CallbackIFvvEEE) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ interruptin.o(i._ZN4mbed11InterruptIn4modeE7PinMode) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ interruptin.o(i._ZN4mbed11InterruptIn4modeE7PinMode) refers to gpio_api.o(i.gpio_mode) for gpio_mode
+ interruptin.o(i._ZN4mbed11InterruptIn4modeE7PinMode) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ interruptin.o(i._ZN4mbed11InterruptIn4readEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ interruptin.o(i._ZN4mbed11InterruptIn4riseENS_8CallbackIFvvEEE) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ interruptin.o(i._ZN4mbed11InterruptIn4riseENS_8CallbackIFvvEEE) refers to gpio_irq_api.o(i.gpio_irq_set) for gpio_irq_set
+ interruptin.o(i._ZN4mbed11InterruptIn4riseENS_8CallbackIFvvEEE) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ interruptin.o(i._ZN4mbed11InterruptInC1E7PinName) refers to gpio_irq_api.o(i.gpio_irq_init) for gpio_irq_init
+ interruptin.o(i._ZN4mbed11InterruptInC1E7PinName) refers to mbed_gpio.o(i.gpio_init_in) for gpio_init_in
+ interruptin.o(i._ZN4mbed11InterruptInC1E7PinName) refers to interruptin.o(.constdata__ZTVN4mbed11InterruptInE) for vtable for mbed::InterruptIn
+ interruptin.o(i._ZN4mbed11InterruptInC1E7PinName) refers to interruptin.o(i._ZN4mbed11InterruptIn12_irq_handlerEj14gpio_irq_event) for mbed::InterruptIn::_irq_handler(unsigned, gpio_irq_event)
+ interruptin.o(i._ZN4mbed11InterruptInD0Ev) refers to gpio_irq_api.o(i.gpio_irq_free) for gpio_irq_free
+ interruptin.o(i._ZN4mbed11InterruptInD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ interruptin.o(i._ZN4mbed11InterruptInD0Ev) refers to interruptin.o(.constdata__ZTVN4mbed11InterruptInE) for vtable for mbed::InterruptIn
+ interruptin.o(i._ZN4mbed11InterruptInD1Ev) refers to gpio_irq_api.o(i.gpio_irq_free) for gpio_irq_free
+ interruptin.o(i._ZN4mbed11InterruptInD1Ev) refers to interruptin.o(.constdata__ZTVN4mbed11InterruptInE) for vtable for mbed::InterruptIn
+ interruptin.o(i._ZN4mbed11InterruptIncviEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ interruptin.o(i._ZN4mbed11InterruptIncviEv) refers to interruptin.o(i._ZN4mbed11InterruptIn4readEv) for i._ZN4mbed11InterruptIn4readEv
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptIn12_irq_handlerEj14gpio_irq_event) for i._ZN4mbed11InterruptIn12_irq_handlerEj14gpio_irq_event
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptInC1E7PinName) for i._ZN4mbed11InterruptInC1E7PinName
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptInD1Ev) for i._ZN4mbed11InterruptInD1Ev
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptInD0Ev) for i._ZN4mbed11InterruptInD0Ev
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptIn4readEv) for i._ZN4mbed11InterruptIn4readEv
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptIncviEv) for i._ZN4mbed11InterruptIncviEv
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptIn4riseENS_8CallbackIFvvEEE) for i._ZN4mbed11InterruptIn4riseENS_8CallbackIFvvEEE
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptIn4fallENS_8CallbackIFvvEEE) for i._ZN4mbed11InterruptIn4fallENS_8CallbackIFvvEEE
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptIn4modeE7PinMode) for i._ZN4mbed11InterruptIn4modeE7PinMode
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptIn10enable_irqEv) for i._ZN4mbed11InterruptIn10enable_irqEv
+ interruptin.o(.ARM.exidx) refers to interruptin.o(i._ZN4mbed11InterruptIn11disable_irqEv) for i._ZN4mbed11InterruptIn11disable_irqEv
+ interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb) refers to callchain.o(i._ZN4mbed9CallChain9add_frontENS_8CallbackIFvvEEE) for mbed::CallChain::add_front(mbed::Callback<void()>)
+ interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb) refers to callchain.o(i._ZN4mbed9CallChainC1Ei) for mbed::CallChain::CallChain(int)
+ interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb) refers to cmsis_nvic.o(i.__NVIC_GetVector) for __NVIC_GetVector
+ interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb) refers to callchain.o(i._ZN4mbed9CallChain3addENS_8CallbackIFvvEEE) for mbed::CallChain::add(mbed::Callback<void()>)
+ interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb) refers to cmsis_nvic.o(i.__NVIC_SetVector) for __NVIC_SetVector
+ interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb) refers to interruptmanager.o(t._ZN4mbed8CallbackIFvvEE12_staticthunkEPvS3_) for mbed::Callback<void()>::_staticthunk(void*, void*)
+ interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb) refers to interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv) for mbed::InterruptManager::static_irq_helper()
+ interruptmanager.o(i._ZN4mbed16InterruptManager10irq_helperEv) refers to callchain.o(i._ZN4mbed9CallChain4callEv) for mbed::CallChain::call()
+ interruptmanager.o(i._ZN4mbed16InterruptManager14remove_handlerEPNS_8CallbackIFvvEEE9IRQn_Type) refers to callchain.o(i._ZN4mbed9CallChain6removeEPNS_8CallbackIFvvEEE) for mbed::CallChain::remove(mbed::Callback<void()>*)
+ interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv) refers to callchain.o(i._ZN4mbed9CallChain4callEv) for mbed::CallChain::call()
+ interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv) refers to interruptmanager.o(.data) for .data
+ interruptmanager.o(i._ZN4mbed16InterruptManager19must_replace_vectorE9IRQn_Type) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ interruptmanager.o(i._ZN4mbed16InterruptManager19must_replace_vectorE9IRQn_Type) refers to callchain.o(i._ZN4mbed9CallChainC1Ei) for mbed::CallChain::CallChain(int)
+ interruptmanager.o(i._ZN4mbed16InterruptManager19must_replace_vectorE9IRQn_Type) refers to cmsis_nvic.o(i.__NVIC_GetVector) for __NVIC_GetVector
+ interruptmanager.o(i._ZN4mbed16InterruptManager19must_replace_vectorE9IRQn_Type) refers to callchain.o(i._ZN4mbed9CallChain3addENS_8CallbackIFvvEEE) for mbed::CallChain::add(mbed::Callback<void()>)
+ interruptmanager.o(i._ZN4mbed16InterruptManager19must_replace_vectorE9IRQn_Type) refers to interruptmanager.o(t._ZN4mbed8CallbackIFvvEE12_staticthunkEPvS3_) for mbed::Callback<void()>::_staticthunk(void*, void*)
+ interruptmanager.o(i._ZN4mbed16InterruptManager3getEv) refers to retarget.o(i._Znwj) for operator new(unsigned)
+ interruptmanager.o(i._ZN4mbed16InterruptManager3getEv) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ interruptmanager.o(i._ZN4mbed16InterruptManager3getEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ interruptmanager.o(i._ZN4mbed16InterruptManager3getEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ interruptmanager.o(i._ZN4mbed16InterruptManager3getEv) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ interruptmanager.o(i._ZN4mbed16InterruptManager3getEv) refers to interruptmanager.o(.data) for .data
+ interruptmanager.o(i._ZN4mbed16InterruptManager7destroyEv) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ interruptmanager.o(i._ZN4mbed16InterruptManager7destroyEv) refers to interruptmanager.o(.data) for .data
+ interruptmanager.o(i._ZN4mbed16InterruptManagerC1Ev) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManagerD1Ev) for i._ZN4mbed16InterruptManagerD1Ev
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManagerC1Ev) for i._ZN4mbed16InterruptManagerC1Ev
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager3getEv) for i._ZN4mbed16InterruptManager3getEv
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager7destroyEv) for i._ZN4mbed16InterruptManager7destroyEv
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager6unlockEv) for i._ZN4mbed16InterruptManager6unlockEv
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager4lockEv) for i._ZN4mbed16InterruptManager4lockEv
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager14remove_handlerEPNS_8CallbackIFvvEEE9IRQn_Type) for i._ZN4mbed16InterruptManager14remove_handlerEPNS_8CallbackIFvvEEE9IRQn_Type
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager10irq_helperEv) for i._ZN4mbed16InterruptManager10irq_helperEv
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv) for i._ZN4mbed16InterruptManager17static_irq_helperEv
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager19must_replace_vectorE9IRQn_Type) for i._ZN4mbed16InterruptManager19must_replace_vectorE9IRQn_Type
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb) for i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(i._ZN4mbed16InterruptManager13get_irq_indexE9IRQn_Type) for i._ZN4mbed16InterruptManager13get_irq_indexE9IRQn_Type
+ mbed_alloc_wrappers.o(.ARM.exidx) refers to mbed_alloc_wrappers.o(i.mbed_stats_heap_get) for i.mbed_stats_heap_get
+ mbed_assert.o(i.mbed_assert_internal) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ mbed_assert.o(i.mbed_assert_internal) refers to mbed_board.o(i.mbed_error_printf) for mbed_error_printf
+ mbed_assert.o(i.mbed_assert_internal) refers to mbed_board.o(i.mbed_die) for mbed_die
+ mbed_board.o(i.mbed_die) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ mbed_board.o(i.mbed_die) refers to mbed_gpio.o(i.gpio_init_out) for gpio_init_out
+ mbed_board.o(i.mbed_die) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_board.o(i.mbed_die) refers to mbed_wait_api.o(i.wait_ms) for wait_ms
+ mbed_board.o(i.mbed_error_printf) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ mbed_board.o(i.mbed_error_printf) refers to vsprintf.o(.text) for vsprintf
+ mbed_board.o(i.mbed_error_printf) refers to serial_api.o(i.serial_init) for serial_init
+ mbed_board.o(i.mbed_error_printf) refers to serial_api.o(i.serial_putc) for serial_putc
+ mbed_board.o(i.mbed_error_printf) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ mbed_board.o(i.mbed_error_printf) refers to serial_api.o(.data) for stdio_uart_inited
+ mbed_board.o(i.mbed_error_printf) refers to serial_api.o(.bss) for stdio_uart
+ mbed_board.o(i.mbed_error_vfprintf) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ mbed_board.o(i.mbed_error_vfprintf) refers to vsprintf.o(.text) for vsprintf
+ mbed_board.o(i.mbed_error_vfprintf) refers to serial_api.o(i.serial_init) for serial_init
+ mbed_board.o(i.mbed_error_vfprintf) refers to serial_api.o(i.serial_putc) for serial_putc
+ mbed_board.o(i.mbed_error_vfprintf) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ mbed_board.o(i.mbed_error_vfprintf) refers to serial_api.o(.data) for stdio_uart_inited
+ mbed_board.o(i.mbed_error_vfprintf) refers to serial_api.o(.bss) for stdio_uart
+ mbed_critical.o(i.core_util_critical_section_enter) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_critical.o(i.core_util_critical_section_enter) refers to mbed_critical.o(.data) for .data
+ mbed_critical.o(i.core_util_critical_section_exit) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_critical.o(i.core_util_critical_section_exit) refers to mbed_critical.o(.data) for .data
+ mbed_error.o(i.error) refers to mbed_board.o(i.mbed_error_vfprintf) for mbed_error_vfprintf
+ mbed_error.o(i.error) refers to retarget.o(i.exit) for exit
+ mbed_gpio.o(i.gpio_init_in) refers to gpio_api.o(i.gpio_init) for gpio_init
+ mbed_gpio.o(i.gpio_init_in) refers to gpio_api.o(i.gpio_dir) for gpio_dir
+ mbed_gpio.o(i.gpio_init_in) refers to gpio_api.o(i.gpio_mode) for gpio_mode
+ mbed_gpio.o(i.gpio_init_in_ex) refers to gpio_api.o(i.gpio_init) for gpio_init
+ mbed_gpio.o(i.gpio_init_in_ex) refers to gpio_api.o(i.gpio_dir) for gpio_dir
+ mbed_gpio.o(i.gpio_init_in_ex) refers to gpio_api.o(i.gpio_mode) for gpio_mode
+ mbed_gpio.o(i.gpio_init_inout) refers to gpio_api.o(i.gpio_init) for gpio_init
+ mbed_gpio.o(i.gpio_init_inout) refers to gpio_api.o(i.gpio_dir) for gpio_dir
+ mbed_gpio.o(i.gpio_init_inout) refers to gpio_api.o(i.gpio_mode) for gpio_mode
+ mbed_gpio.o(i.gpio_init_inout) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_gpio.o(i.gpio_init_inout) refers to mbed_gpio.o(i.gpio_init_out_ex) for i.gpio_init_out_ex
+ mbed_gpio.o(i.gpio_init_out) refers to gpio_api.o(i.gpio_init) for gpio_init
+ mbed_gpio.o(i.gpio_init_out) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_gpio.o(i.gpio_init_out) refers to gpio_api.o(i.gpio_dir) for gpio_dir
+ mbed_gpio.o(i.gpio_init_out) refers to gpio_api.o(i.gpio_mode) for gpio_mode
+ mbed_gpio.o(i.gpio_init_out) refers to mbed_gpio.o(i.gpio_init_out_ex) for i.gpio_init_out_ex
+ mbed_gpio.o(i.gpio_init_out_ex) refers to gpio_api.o(i.gpio_init) for gpio_init
+ mbed_gpio.o(i.gpio_init_out_ex) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_gpio.o(i.gpio_init_out_ex) refers to gpio_api.o(i.gpio_dir) for gpio_dir
+ mbed_gpio.o(i.gpio_init_out_ex) refers to gpio_api.o(i.gpio_mode) for gpio_mode
+ mbed_mem_trace.o(i.mbed_mem_trace_calloc) refers to mbed_critical.o(i.core_util_atomic_incr_u8) for core_util_atomic_incr_u8
+ mbed_mem_trace.o(i.mbed_mem_trace_calloc) refers to mbed_critical.o(i.core_util_atomic_decr_u8) for core_util_atomic_decr_u8
+ mbed_mem_trace.o(i.mbed_mem_trace_calloc) refers to mbed_mem_trace.o(.data) for .data
+ mbed_mem_trace.o(i.mbed_mem_trace_default_callback) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ mbed_mem_trace.o(i.mbed_mem_trace_default_callback) refers to _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A) for _printf_u
+ mbed_mem_trace.o(i.mbed_mem_trace_default_callback) refers to _printf_p.o(.ARM.Collect$$_printf_percent$$00000002) for _printf_p
+ mbed_mem_trace.o(i.mbed_mem_trace_default_callback) refers to _printf_dec.o(.text) for _printf_int_dec
+ mbed_mem_trace.o(i.mbed_mem_trace_default_callback) refers to _printf_hex_int_ll_ptr.o(.text) for _printf_longlong_hex
+ mbed_mem_trace.o(i.mbed_mem_trace_default_callback) refers to __2printf.o(.text) for __2printf
+ mbed_mem_trace.o(i.mbed_mem_trace_free) refers to mbed_critical.o(i.core_util_atomic_incr_u8) for core_util_atomic_incr_u8
+ mbed_mem_trace.o(i.mbed_mem_trace_free) refers to mbed_critical.o(i.core_util_atomic_decr_u8) for core_util_atomic_decr_u8
+ mbed_mem_trace.o(i.mbed_mem_trace_free) refers to mbed_mem_trace.o(.data) for .data
+ mbed_mem_trace.o(i.mbed_mem_trace_malloc) refers to mbed_critical.o(i.core_util_atomic_incr_u8) for core_util_atomic_incr_u8
+ mbed_mem_trace.o(i.mbed_mem_trace_malloc) refers to mbed_critical.o(i.core_util_atomic_decr_u8) for core_util_atomic_decr_u8
+ mbed_mem_trace.o(i.mbed_mem_trace_malloc) refers to mbed_mem_trace.o(.data) for .data
+ mbed_mem_trace.o(i.mbed_mem_trace_realloc) refers to mbed_critical.o(i.core_util_atomic_incr_u8) for core_util_atomic_incr_u8
+ mbed_mem_trace.o(i.mbed_mem_trace_realloc) refers to mbed_critical.o(i.core_util_atomic_decr_u8) for core_util_atomic_decr_u8
+ mbed_mem_trace.o(i.mbed_mem_trace_realloc) refers to mbed_mem_trace.o(.data) for .data
+ mbed_mem_trace.o(i.mbed_mem_trace_set_callback) refers to mbed_mem_trace.o(.data) for .data
+ mbed_pinmap_common.o(i.pinmap_function) refers to mbed_error.o(i.error) for error
+ mbed_pinmap_common.o(i.pinmap_merge) refers to mbed_error.o(i.error) for error
+ mbed_pinmap_common.o(i.pinmap_peripheral) refers to mbed_error.o(i.error) for error
+ mbed_pinmap_common.o(i.pinmap_pinout) refers to pinmap.o(i.pin_function) for pin_function
+ mbed_pinmap_common.o(i.pinmap_pinout) refers to pinmap.o(i.pin_mode) for pin_mode
+ mbed_pinmap_common.o(i.pinmap_pinout) refers to mbed_error.o(i.error) for error
+ mbed_rtc_time.o(i.attach_rtc) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_rtc_time.o(i.attach_rtc) refers to mbed_rtc_time.o(.data) for .data
+ mbed_rtc_time.o(i.attach_rtc) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ mbed_rtc_time.o(i.attach_rtc) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ mbed_rtc_time.o(i.clock) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_rtc_time.o(i.clock) refers to us_ticker.o(i.us_ticker_read) for us_ticker_read
+ mbed_rtc_time.o(i.clock) refers to mbed_rtc_time.o(.data) for .data
+ mbed_rtc_time.o(i.clock) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ mbed_rtc_time.o(i.clock) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ mbed_rtc_time.o(i.set_time) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_rtc_time.o(i.set_time) refers to mbed_rtc_time.o(.data) for .data
+ mbed_rtc_time.o(i.set_time) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ mbed_rtc_time.o(i.set_time) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ mbed_rtc_time.o(i.time) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ mbed_rtc_time.o(i.time) refers to mbed_rtc_time.o(.data) for .data
+ mbed_rtc_time.o(i.time) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ mbed_rtc_time.o(i.time) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ mbed_rtc_time.o(.ARM.exidx) refers to mbed_rtc_time.o(i.set_time) for i.set_time
+ mbed_rtc_time.o(.ARM.exidx) refers to mbed_rtc_time.o(i.time) for i.time
+ mbed_rtc_time.o(.ARM.exidx) refers to mbed_rtc_time.o(i.clock) for i.clock
+ mbed_rtc_time.o(.ARM.exidx) refers to mbed_rtc_time.o(i.attach_rtc) for i.attach_rtc
+ mbed_rtc_time.o(.data) refers to rtc_api.o(i.rtc_init) for rtc_init
+ mbed_rtc_time.o(.data) refers to rtc_api.o(i.rtc_isenabled) for rtc_isenabled
+ mbed_rtc_time.o(.data) refers to rtc_api.o(i.rtc_read) for rtc_read
+ mbed_rtc_time.o(.data) refers to rtc_api.o(i.rtc_write) for rtc_write
+ mbed_ticker_api.o(i.ticker_get_next_timestamp) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ mbed_ticker_api.o(i.ticker_get_next_timestamp) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ mbed_ticker_api.o(i.ticker_insert_event) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ mbed_ticker_api.o(i.ticker_insert_event) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ mbed_ticker_api.o(i.ticker_remove_event) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ mbed_ticker_api.o(i.ticker_remove_event) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ mbed_us_ticker_api.o(i.get_us_ticker_data) refers to mbed_us_ticker_api.o(.constdata) for .constdata
+ mbed_us_ticker_api.o(i.us_ticker_irq_handler) refers to mbed_ticker_api.o(i.ticker_irq_handler) for ticker_irq_handler
+ mbed_us_ticker_api.o(i.us_ticker_irq_handler) refers to mbed_us_ticker_api.o(.constdata) for .constdata
+ mbed_us_ticker_api.o(.constdata) refers to us_ticker.o(i.us_ticker_init) for us_ticker_init
+ mbed_us_ticker_api.o(.constdata) refers to us_ticker.o(i.us_ticker_read) for us_ticker_read
+ mbed_us_ticker_api.o(.constdata) refers to us_ticker.o(i.us_ticker_disable_interrupt) for us_ticker_disable_interrupt
+ mbed_us_ticker_api.o(.constdata) refers to us_ticker.o(i.us_ticker_clear_interrupt) for us_ticker_clear_interrupt
+ mbed_us_ticker_api.o(.constdata) refers to us_ticker.o(i.us_ticker_set_interrupt) for us_ticker_set_interrupt
+ mbed_us_ticker_api.o(.constdata) refers to mbed_us_ticker_api.o(.constdata) for us_interface
+ mbed_us_ticker_api.o(.constdata) refers to mbed_us_ticker_api.o(.data) for events
+ mbed_wait_api.o(i.wait) refers to us_ticker.o(i.us_ticker_read) for us_ticker_read
+ mbed_wait_api.o(i.wait_ms) refers to us_ticker.o(i.us_ticker_read) for us_ticker_read
+ mbed_wait_api.o(i.wait_us) refers to us_ticker.o(i.us_ticker_read) for us_ticker_read
+ rawserial.o(i._ZN4mbed9RawSerial4getcEv) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_getcEv) for mbed::SerialBase::_base_getc()
+ rawserial.o(i._ZN4mbed9RawSerial4putcEi) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_putcEi) for mbed::SerialBase::_base_putc(int)
+ rawserial.o(i._ZN4mbed9RawSerial4putsEPKc) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_putcEi) for mbed::SerialBase::_base_putc(int)
+ rawserial.o(i._ZN4mbed9RawSerial6printfEPKcz) refers to c89vsnprintf.o(.text) for __c89vsnprintf
+ rawserial.o(i._ZN4mbed9RawSerial6printfEPKcz) refers to c89vsprintf.o(.text) for __c89vsprintf
+ rawserial.o(i._ZN4mbed9RawSerial6printfEPKcz) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_putcEi) for mbed::SerialBase::_base_putc(int)
+ rawserial.o(i._ZN4mbed9RawSerial6printfEPKcz) refers to retarget.o(i._Znaj) for operator new[] (unsigned)
+ rawserial.o(i._ZN4mbed9RawSerial6printfEPKcz) refers to retarget.o(i._ZdaPv) for operator delete[] (void*)
+ rawserial.o(i._ZN4mbed9RawSerialC1E7PinNameS1_) refers to serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) for mbed::SerialBase::SerialBase(PinName, PinName)
+ rawserial.o(i._ZN4mbed9RawSerialC1E7PinNameS1_) refers to rawserial.o(.constdata__ZTVN4mbed9RawSerialE) for vtable for mbed::RawSerial
+ rawserial.o(.ARM.exidx) refers to rawserial.o(i._ZN4mbed9RawSerialC1E7PinNameS1_) for i._ZN4mbed9RawSerialC1E7PinNameS1_
+ rawserial.o(.ARM.exidx) refers to rawserial.o(i._ZN4mbed9RawSerial4putcEi) for i._ZN4mbed9RawSerial4putcEi
+ rawserial.o(.ARM.exidx) refers to rawserial.o(i._ZN4mbed9RawSerial4getcEv) for i._ZN4mbed9RawSerial4getcEv
+ rawserial.o(.ARM.exidx) refers to rawserial.o(i._ZN4mbed9RawSerial4putsEPKc) for i._ZN4mbed9RawSerial4putsEPKc
+ rawserial.o(.ARM.exidx) refers to rawserial.o(i._ZN4mbed9RawSerial6printfEPKcz) for i._ZN4mbed9RawSerial6printfEPKcz
+ rawserial.o(.ARM.exidx) refers to rawserial.o(i._ZN4mbed9RawSerial4lockEv) for i._ZN4mbed9RawSerial4lockEv
+ rawserial.o(.ARM.exidx) refers to rawserial.o(i._ZN4mbed9RawSerial6unlockEv) for i._ZN4mbed9RawSerial6unlockEv
+ retarget.o(i.$Sub$$main) refers to mbed_overrides.o(i.mbed_sdk_init) for mbed_sdk_init
+ retarget.o(i.$Sub$$main) refers to retarget.o(i.mbed_main) for mbed_main
+ retarget.o(i.$Sub$$main) refers to main.o(i.main) for $Super$$main
+ retarget.o(i._ZN4mbed10FileHandleD0Ev) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ retarget.o(i._ZN4mbed10FileHandleD0Ev) refers to h1_free.o(.text) for free
+ retarget.o(i._ZN4mbed10FileHandleD0Ev) refers to retarget.o(.constdata__ZTVN4mbed10FileHandleE) for vtable for mbed::FileHandle
+ retarget.o(i._ZN4mbed10FileHandleD0Ev) refers to retarget.o(.data) for .data
+ retarget.o(i._ZN4mbed10FileHandleD0Ev) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ retarget.o(i._ZN4mbed10FileHandleD0Ev) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ retarget.o(i._ZN4mbed10FileHandleD0Ev) refers to retarget.o(.bss) for .bss
+ retarget.o(i._ZN4mbed10FileHandleD2Ev) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ retarget.o(i._ZN4mbed10FileHandleD2Ev) refers to retarget.o(.constdata__ZTVN4mbed10FileHandleE) for vtable for mbed::FileHandle
+ retarget.o(i._ZN4mbed10FileHandleD2Ev) refers to retarget.o(.data) for .data
+ retarget.o(i._ZN4mbed10FileHandleD2Ev) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ retarget.o(i._ZN4mbed10FileHandleD2Ev) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ retarget.o(i._ZN4mbed10FileHandleD2Ev) refers to retarget.o(.bss) for .bss
+ retarget.o(i._ZN4mbed26mbed_set_unbuffered_streamEPSt6__FILE) refers to setbuf.o(.text) for setbuf
+ retarget.o(i._ZN4mbed9mbed_getcEPSt6__FILE) refers to fgetc.o(i.fgetc) for fgetc
+ retarget.o(i._ZN4mbed9mbed_getsEPciPSt6__FILE) refers to fgets.o(.text) for fgets
+ retarget.o(i._ZdaPv) refers to h1_free.o(.text) for free
+ retarget.o(i._ZdlPv) refers to h1_free.o(.text) for free
+ retarget.o(i._Znaj) refers to h1_alloc.o(.text) for malloc
+ retarget.o(i._Znaj) refers to mbed_error.o(i.error) for error
+ retarget.o(i._Znwj) refers to h1_alloc.o(.text) for malloc
+ retarget.o(i._Znwj) refers to mbed_error.o(i.error) for error
+ retarget.o(i._sys_close) refers to retarget.o(.bss) for .bss
+ retarget.o(i._sys_ensure) refers to retarget.o(.bss) for .bss
+ retarget.o(i._sys_flen) refers to retarget.o(.bss) for .bss
+ retarget.o(i._sys_istty) refers to retarget.o(.bss) for .bss
+ retarget.o(i._sys_open) refers to _scanf_int.o(.text) for _scanf_int
+ retarget.o(i._sys_open) refers to strcmpv7m.o(.text) for strcmp
+ retarget.o(i._sys_open) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ retarget.o(i._sys_open) refers to serial_api.o(i.serial_init) for serial_init
+ retarget.o(i._sys_open) refers to filepath.o(i._ZN4mbed8FilePathC1EPKc) for mbed::FilePath::FilePath(const char*)
+ retarget.o(i._sys_open) refers to filepath.o(i._ZN4mbed8FilePath6existsEv) for mbed::FilePath::exists()
+ retarget.o(i._sys_open) refers to filepath.o(i._ZN4mbed8FilePath6isFileEv) for mbed::FilePath::isFile()
+ retarget.o(i._sys_open) refers to filepath.o(i._ZN4mbed8FilePath4fileEv) for mbed::FilePath::file()
+ retarget.o(i._sys_open) refers to __0sscanf.o(.text) for __0sscanf
+ retarget.o(i._sys_open) refers to filepath.o(i._ZN4mbed8FilePath10fileSystemEv) for mbed::FilePath::fileSystem()
+ retarget.o(i._sys_open) refers to filepath.o(i._ZN4mbed8FilePath8fileNameEv) for mbed::FilePath::fileName()
+ retarget.o(i._sys_open) refers to retarget.o(.constdata) for .constdata
+ retarget.o(i._sys_open) refers to serial_api.o(.data) for stdio_uart_inited
+ retarget.o(i._sys_open) refers to retarget.o(.data) for .data
+ retarget.o(i._sys_open) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ retarget.o(i._sys_open) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ retarget.o(i._sys_open) refers to retarget.o(.bss) for .bss
+ retarget.o(i._sys_open) refers to serial_api.o(.bss) for stdio_uart
+ retarget.o(i._sys_read) refers to serial_api.o(i.serial_init) for serial_init
+ retarget.o(i._sys_read) refers to serial_api.o(i.serial_getc) for serial_getc
+ retarget.o(i._sys_read) refers to serial_api.o(.data) for stdio_uart_inited
+ retarget.o(i._sys_read) refers to serial_api.o(.bss) for stdio_uart
+ retarget.o(i._sys_read) refers to retarget.o(.bss) for .bss
+ retarget.o(i._sys_seek) refers to retarget.o(.bss) for .bss
+ retarget.o(i._sys_write) refers to serial_api.o(i.serial_init) for serial_init
+ retarget.o(i._sys_write) refers to serial_api.o(i.serial_putc) for serial_putc
+ retarget.o(i._sys_write) refers to serial_api.o(.data) for stdio_uart_inited
+ retarget.o(i._sys_write) refers to serial_api.o(.bss) for stdio_uart
+ retarget.o(i._sys_write) refers to retarget.o(.bss) for .bss
+ retarget.o(i.exit) refers to fflush.o(.text) for fflush
+ retarget.o(i.exit) refers to mbed_board.o(i.mbed_die) for mbed_die
+ retarget.o(i.exit) refers to stdio_streams.o(.bss) for __stdout
+ retarget.o(i.exit) refers to stdio_streams.o(.bss) for __stderr
+ retarget.o(i.mkdir) refers to filepath.o(i._ZN4mbed8FilePathC1EPKc) for mbed::FilePath::FilePath(const char*)
+ retarget.o(i.mkdir) refers to filepath.o(i._ZN4mbed8FilePath10fileSystemEv) for mbed::FilePath::fileSystem()
+ retarget.o(i.mkdir) refers to filepath.o(i._ZN4mbed8FilePath8fileNameEv) for mbed::FilePath::fileName()
+ retarget.o(i.opendir) refers to filepath.o(i._ZN4mbed8FilePathC1EPKc) for mbed::FilePath::FilePath(const char*)
+ retarget.o(i.opendir) refers to filepath.o(i._ZN4mbed8FilePath10fileSystemEv) for mbed::FilePath::fileSystem()
+ retarget.o(i.opendir) refers to filepath.o(i._ZN4mbed8FilePath8fileNameEv) for mbed::FilePath::fileName()
+ retarget.o(i.opendir) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike7opendirEv) for mbed::FileSystemLike::opendir()
+ retarget.o(i.remove) refers to filepath.o(i._ZN4mbed8FilePathC1EPKc) for mbed::FilePath::FilePath(const char*)
+ retarget.o(i.remove) refers to filepath.o(i._ZN4mbed8FilePath10fileSystemEv) for mbed::FilePath::fileSystem()
+ retarget.o(i.remove) refers to filepath.o(i._ZN4mbed8FilePath8fileNameEv) for mbed::FilePath::fileName()
+ retarget.o(i.rename) refers to filepath.o(i._ZN4mbed8FilePathC1EPKc) for mbed::FilePath::FilePath(const char*)
+ retarget.o(i.rename) refers to filepath.o(i._ZN4mbed8FilePath10fileSystemEv) for mbed::FilePath::fileSystem()
+ retarget.o(i.rename) refers to filepath.o(i._ZN4mbed8FilePath8fileNameEv) for mbed::FilePath::fileName()
+ retarget.o(.ARM.exidx) refers to retarget.o(i._sys_open) for i._sys_open
+ retarget.o(.ARM.exidx) refers to retarget.o(i._sys_close) for i._sys_close
+ retarget.o(.ARM.exidx) refers to retarget.o(i._sys_write) for i._sys_write
+ retarget.o(.ARM.exidx) refers to retarget.o(i._sys_read) for i._sys_read
+ retarget.o(.ARM.exidx) refers to retarget.o(i._sys_istty) for i._sys_istty
+ retarget.o(.ARM.exidx) refers to retarget.o(i._sys_seek) for i._sys_seek
+ retarget.o(.ARM.exidx) refers to retarget.o(i._sys_ensure) for i._sys_ensure
+ retarget.o(.ARM.exidx) refers to retarget.o(i._sys_flen) for i._sys_flen
+ retarget.o(.ARM.exidx) refers to retarget.o(i.remove) for i.remove
+ retarget.o(.ARM.exidx) refers to retarget.o(i.rename) for i.rename
+ retarget.o(.ARM.exidx) refers to retarget.o(i.tmpnam) for i.tmpnam
+ retarget.o(.ARM.exidx) refers to retarget.o(i.tmpfile) for i.tmpfile
+ retarget.o(.ARM.exidx) refers to retarget.o(i._sys_command_string) for i._sys_command_string
+ retarget.o(.ARM.exidx) refers to retarget.o(i.opendir) for i.opendir
+ retarget.o(.ARM.exidx) refers to retarget.o(i.readdir) for i.readdir
+ retarget.o(.ARM.exidx) refers to retarget.o(i.closedir) for i.closedir
+ retarget.o(.ARM.exidx) refers to retarget.o(i.rewinddir) for i.rewinddir
+ retarget.o(.ARM.exidx) refers to retarget.o(i.telldir) for i.telldir
+ retarget.o(.ARM.exidx) refers to retarget.o(i.seekdir) for i.seekdir
+ retarget.o(.ARM.exidx) refers to retarget.o(i.mkdir) for i.mkdir
+ retarget.o(.ARM.exidx) refers to retarget.o(i.mbed_main) for i.mbed_main
+ retarget.o(.ARM.exidx) refers to retarget.o(i.mbed_sdk_init) for i.mbed_sdk_init
+ retarget.o(.ARM.exidx) refers to retarget.o(i.$Sub$$main) for i.$Sub$$main
+ retarget.o(.ARM.exidx) refers to retarget.o(i.exit) for i.exit
+ retarget.o(.ARM.exidx) refers to retarget.o(i._Znwj) for i._Znwj
+ retarget.o(.ARM.exidx) refers to retarget.o(i._Znaj) for i._Znaj
+ retarget.o(.ARM.exidx) refers to retarget.o(i._ZdlPv) for i._ZdlPv
+ retarget.o(.ARM.exidx) refers to retarget.o(i._ZdaPv) for i._ZdaPv
+ retarget.o(.ARM.exidx) refers to retarget.o(i._ZN4mbed10FileHandleD2Ev) for i._ZN4mbed10FileHandleD2Ev
+ retarget.o(.ARM.exidx) refers to retarget.o(i._ZN4mbed10FileHandleD0Ev) for i._ZN4mbed10FileHandleD0Ev
+ retarget.o(.ARM.exidx) refers to retarget.o(i._ZN4mbed26mbed_set_unbuffered_streamEPSt6__FILE) for i._ZN4mbed26mbed_set_unbuffered_streamEPSt6__FILE
+ retarget.o(.ARM.exidx) refers to retarget.o(i._ZN4mbed9mbed_getcEPSt6__FILE) for i._ZN4mbed9mbed_getcEPSt6__FILE
+ retarget.o(.ARM.exidx) refers to retarget.o(i._ZN4mbed9mbed_getsEPciPSt6__FILE) for i._ZN4mbed9mbed_getsEPciPSt6__FILE
+ serial.o(i._ZN4mbed6Serial5_getcEv) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_getcEv) for mbed::SerialBase::_base_getc()
+ serial.o(i._ZN4mbed6Serial5_putcEi) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_putcEi) for mbed::SerialBase::_base_putc(int)
+ serial.o(i._ZN4mbed6SerialC1E7PinNameS1_PKc) refers to serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) for mbed::SerialBase::SerialBase(PinName, PinName)
+ serial.o(i._ZN4mbed6SerialC1E7PinNameS1_PKc) refers to stream.o(i._ZN4mbed6StreamC2EPKc) for mbed::Stream::Stream__sub_object(const char*)
+ serial.o(i._ZN4mbed6SerialC1E7PinNameS1_PKc) refers to serial.o(.constdata__ZTVN4mbed6SerialE) for vtable for mbed::Serial
+ serial.o(i._ZThn184_N4mbed6Serial5_getcEv) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_getcEv) for mbed::SerialBase::_base_getc()
+ serial.o(i._ZThn184_N4mbed6Serial5_putcEi) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_putcEi) for mbed::SerialBase::_base_putc(int)
+ serial.o(.ARM.exidx) refers to serial.o(i._ZN4mbed6SerialC1E7PinNameS1_PKc) for i._ZN4mbed6SerialC1E7PinNameS1_PKc
+ serial.o(.ARM.exidx) refers to serial.o(i._ZN4mbed6Serial5_getcEv) for i._ZN4mbed6Serial5_getcEv
+ serial.o(.ARM.exidx) refers to serial.o(i._ZThn184_N4mbed6Serial5_getcEv) for i._ZThn184_N4mbed6Serial5_getcEv
+ serial.o(.ARM.exidx) refers to serial.o(i._ZN4mbed6Serial5_putcEi) for i._ZN4mbed6Serial5_putcEi
+ serial.o(.ARM.exidx) refers to serial.o(i._ZThn184_N4mbed6Serial5_putcEi) for i._ZThn184_N4mbed6Serial5_putcEi
+ serial.o(.ARM.exidx) refers to serial.o(i._ZN4mbed6Serial4lockEv) for i._ZN4mbed6Serial4lockEv
+ serial.o(.ARM.exidx) refers to serial.o(i._ZThn184_N4mbed6Serial4lockEv) for i._ZThn184_N4mbed6Serial4lockEv
+ serial.o(.ARM.exidx) refers to serial.o(i._ZN4mbed6Serial6unlockEv) for i._ZN4mbed6Serial6unlockEv
+ serial.o(.ARM.exidx) refers to serial.o(i._ZThn184_N4mbed6Serial6unlockEv) for i._ZThn184_N4mbed6Serial6unlockEv
+ serialbase.o(i._ZN4mbed10SerialBase10_base_getcEv) refers to serial_api.o(i.serial_getc) for serial_getc
+ serialbase.o(i._ZN4mbed10SerialBase10_base_putcEi) refers to serial_api.o(i.serial_putc) for serial_putc
+ serialbase.o(i._ZN4mbed10SerialBase10abort_readEv) refers to serial_api.o(i.serial_rx_abort_asynch) for serial_rx_abort_asynch
+ serialbase.o(i._ZN4mbed10SerialBase10send_breakEv) refers to serial_api.o(i.serial_break_set) for serial_break_set
+ serialbase.o(i._ZN4mbed10SerialBase10send_breakEv) refers to mbed_wait_api.o(i.wait_us) for wait_us
+ serialbase.o(i._ZN4mbed10SerialBase10send_breakEv) refers to serial_api.o(i.serial_break_clear) for serial_break_clear
+ serialbase.o(i._ZN4mbed10SerialBase10start_readEPvicRKNS_8CallbackIFviEEEih) refers to serial_api.o(i.serial_rx_asynch) for serial_rx_asynch
+ serialbase.o(i._ZN4mbed10SerialBase10start_readEPvicRKNS_8CallbackIFviEEEih) refers to serialbase.o(.constdata) for .constdata
+ serialbase.o(i._ZN4mbed10SerialBase11abort_writeEv) refers to serial_api.o(i.serial_tx_abort_asynch) for serial_tx_abort_asynch
+ serialbase.o(i._ZN4mbed10SerialBase11start_writeEPKvicRKNS_8CallbackIFviEEEi) refers to serial_api.o(i.serial_tx_asynch) for serial_tx_asynch
+ serialbase.o(i._ZN4mbed10SerialBase11start_writeEPKvicRKNS_8CallbackIFviEEEi) refers to serialbase.o(.constdata) for .constdata
+ serialbase.o(i._ZN4mbed10SerialBase16set_dma_usage_rxE8DMAUsage) refers to serial_api.o(i.serial_tx_active) for serial_tx_active
+ serialbase.o(i._ZN4mbed10SerialBase16set_dma_usage_txE8DMAUsage) refers to serial_api.o(i.serial_tx_active) for serial_tx_active
+ serialbase.o(i._ZN4mbed10SerialBase16set_flow_controlENS0_4FlowE7PinNameS2_) refers to serial_api.o(i.serial_set_flow_control) for serial_set_flow_control
+ serialbase.o(i._ZN4mbed10SerialBase24interrupt_handler_asynchEv) refers to serial_api.o(i.serial_irq_handler_asynch) for serial_irq_handler_asynch
+ serialbase.o(i._ZN4mbed10SerialBase4baudEi) refers to serial_api.o(i.serial_baud) for serial_baud
+ serialbase.o(i._ZN4mbed10SerialBase4readEPhiRKNS_8CallbackIFviEEEih) refers to serial_api.o(i.serial_rx_active) for serial_rx_active
+ serialbase.o(i._ZN4mbed10SerialBase4readEPhiRKNS_8CallbackIFviEEEih) refers to serial_api.o(i.serial_rx_asynch) for serial_rx_asynch
+ serialbase.o(i._ZN4mbed10SerialBase4readEPhiRKNS_8CallbackIFviEEEih) refers to serialbase.o(.constdata) for .constdata
+ serialbase.o(i._ZN4mbed10SerialBase4readEPtiRKNS_8CallbackIFviEEEih) refers to serial_api.o(i.serial_rx_active) for serial_rx_active
+ serialbase.o(i._ZN4mbed10SerialBase4readEPtiRKNS_8CallbackIFviEEEih) refers to serial_api.o(i.serial_rx_asynch) for serial_rx_asynch
+ serialbase.o(i._ZN4mbed10SerialBase4readEPtiRKNS_8CallbackIFviEEEih) refers to serialbase.o(.constdata) for .constdata
+ serialbase.o(i._ZN4mbed10SerialBase5writeEPKhiRKNS_8CallbackIFviEEEi) refers to serial_api.o(i.serial_tx_active) for serial_tx_active
+ serialbase.o(i._ZN4mbed10SerialBase5writeEPKhiRKNS_8CallbackIFviEEEi) refers to serial_api.o(i.serial_tx_asynch) for serial_tx_asynch
+ serialbase.o(i._ZN4mbed10SerialBase5writeEPKhiRKNS_8CallbackIFviEEEi) refers to serialbase.o(.constdata) for .constdata
+ serialbase.o(i._ZN4mbed10SerialBase5writeEPKtiRKNS_8CallbackIFviEEEi) refers to serial_api.o(i.serial_tx_active) for serial_tx_active
+ serialbase.o(i._ZN4mbed10SerialBase5writeEPKtiRKNS_8CallbackIFviEEEi) refers to serial_api.o(i.serial_tx_asynch) for serial_tx_asynch
+ serialbase.o(i._ZN4mbed10SerialBase5writeEPKtiRKNS_8CallbackIFviEEEi) refers to serialbase.o(.constdata) for .constdata
+ serialbase.o(i._ZN4mbed10SerialBase6attachENS_8CallbackIFvvEEENS0_7IrqTypeE) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ serialbase.o(i._ZN4mbed10SerialBase6attachENS_8CallbackIFvvEEENS0_7IrqTypeE) refers to serial_api.o(i.serial_irq_set) for serial_irq_set
+ serialbase.o(i._ZN4mbed10SerialBase6attachENS_8CallbackIFvvEEENS0_7IrqTypeE) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ serialbase.o(i._ZN4mbed10SerialBase6formatEiNS0_6ParityEi) refers to serial_api.o(i.serial_format) for serial_format
+ serialbase.o(i._ZN4mbed10SerialBase8readableEv) refers to serial_api.o(i.serial_readable) for serial_readable
+ serialbase.o(i._ZN4mbed10SerialBase9writeableEv) refers to serial_api.o(i.serial_writable) for serial_writable
+ serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) refers to aeabi_vec_ctor_nocookie_nodtor.o(i.__aeabi_vec_ctor_nocookie_nodtor) for __aeabi_vec_ctor_nocookie_nodtor
+ serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) refers to serial_api.o(i.serial_init) for serial_init
+ serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) refers to serial_api.o(i.serial_irq_handler) for serial_irq_handler
+ serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) refers to serialbase.o(.constdata) for .constdata
+ serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) refers to serialbase.o(t._ZN6CThunkIN4mbed10SerialBaseEE10trampolineEPS1_PvPMS1_FvS4_E) for CThunk<mbed::SerialBase>::trampoline(mbed::SerialBase*, void*, void(mbed::SerialBase::**)(void*))
+ serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) refers to serialbase.o(i.<Func3>) for <Func3>
+ serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) refers to serialbase.o(i._ZN4mbed10SerialBase12_irq_handlerEj9SerialIrq) for mbed::SerialBase::_irq_handler(unsigned, SerialIrq)
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i.<Func3>) for i.<Func3>
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase4baudEi) for i._ZN4mbed10SerialBase4baudEi
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase6formatEiNS0_6ParityEi) for i._ZN4mbed10SerialBase6formatEiNS0_6ParityEi
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase8readableEv) for i._ZN4mbed10SerialBase8readableEv
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase9writeableEv) for i._ZN4mbed10SerialBase9writeableEv
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase6attachENS_8CallbackIFvvEEENS0_7IrqTypeE) for i._ZN4mbed10SerialBase6attachENS_8CallbackIFvvEEENS0_7IrqTypeE
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase10send_breakEv) for i._ZN4mbed10SerialBase10send_breakEv
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase4lockEv) for i._ZN4mbed10SerialBase4lockEv
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase6unlockEv) for i._ZN4mbed10SerialBase6unlockEv
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase16set_flow_controlENS0_4FlowE7PinNameS2_) for i._ZN4mbed10SerialBase16set_flow_controlENS0_4FlowE7PinNameS2_
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase12_irq_handlerEj9SerialIrq) for i._ZN4mbed10SerialBase12_irq_handlerEj9SerialIrq
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase11start_writeEPKvicRKNS_8CallbackIFviEEEi) for i._ZN4mbed10SerialBase11start_writeEPKvicRKNS_8CallbackIFviEEEi
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase5writeEPKhiRKNS_8CallbackIFviEEEi) for i._ZN4mbed10SerialBase5writeEPKhiRKNS_8CallbackIFviEEEi
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase5writeEPKtiRKNS_8CallbackIFviEEEi) for i._ZN4mbed10SerialBase5writeEPKtiRKNS_8CallbackIFviEEEi
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase11abort_writeEv) for i._ZN4mbed10SerialBase11abort_writeEv
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase10start_readEPvicRKNS_8CallbackIFviEEEih) for i._ZN4mbed10SerialBase10start_readEPvicRKNS_8CallbackIFviEEEih
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase4readEPhiRKNS_8CallbackIFviEEEih) for i._ZN4mbed10SerialBase4readEPhiRKNS_8CallbackIFviEEEih
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase4readEPtiRKNS_8CallbackIFviEEEih) for i._ZN4mbed10SerialBase4readEPtiRKNS_8CallbackIFviEEEih
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase10abort_readEv) for i._ZN4mbed10SerialBase10abort_readEv
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase16set_dma_usage_txE8DMAUsage) for i._ZN4mbed10SerialBase16set_dma_usage_txE8DMAUsage
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase16set_dma_usage_rxE8DMAUsage) for i._ZN4mbed10SerialBase16set_dma_usage_rxE8DMAUsage
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase24interrupt_handler_asynchEv) for i._ZN4mbed10SerialBase24interrupt_handler_asynchEv
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_) for i._ZN4mbed10SerialBaseC1E7PinNameS1_
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_getcEv) for i._ZN4mbed10SerialBase10_base_getcEv
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBase10_base_putcEi) for i._ZN4mbed10SerialBase10_base_putcEi
+ serialbase.o(.constdata) refers to serialbase.o(i._ZN4mbed10SerialBase24interrupt_handler_asynchEv) for mbed::SerialBase::interrupt_handler_asynch()
+ spi.o(i._ZN4mbed3SPI4lockEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ spi.o(i._ZN4mbed3SPI4lockEv) refers to spi.o(.data) for .data
+ spi.o(i._ZN4mbed3SPI4lockEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ spi.o(i._ZN4mbed3SPI4lockEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ spi.o(i._ZN4mbed3SPI5writeEi) refers to spi_api.o(i.spi_format) for spi_format
+ spi.o(i._ZN4mbed3SPI5writeEi) refers to spi_api.o(i.spi_frequency) for spi_frequency
+ spi.o(i._ZN4mbed3SPI5writeEi) refers to spi_api.o(i.spi_master_write) for spi_master_write
+ spi.o(i._ZN4mbed3SPI5writeEi) refers to spi.o(.data) for .data
+ spi.o(i._ZN4mbed3SPI6aquireEv) refers to spi_api.o(i.spi_format) for spi_format
+ spi.o(i._ZN4mbed3SPI6aquireEv) refers to spi_api.o(i.spi_frequency) for spi_frequency
+ spi.o(i._ZN4mbed3SPI6aquireEv) refers to spi.o(.data) for .data
+ spi.o(i._ZN4mbed3SPI6formatEii) refers to spi_api.o(i.spi_format) for spi_format
+ spi.o(i._ZN4mbed3SPI6formatEii) refers to spi_api.o(i.spi_frequency) for spi_frequency
+ spi.o(i._ZN4mbed3SPI6formatEii) refers to spi.o(.data) for .data
+ spi.o(i._ZN4mbed3SPI6unlockEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ spi.o(i._ZN4mbed3SPI6unlockEv) refers to spi.o(.data) for .data
+ spi.o(i._ZN4mbed3SPI6unlockEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ spi.o(i._ZN4mbed3SPI6unlockEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ spi.o(i._ZN4mbed3SPI9frequencyEi) refers to spi_api.o(i.spi_format) for spi_format
+ spi.o(i._ZN4mbed3SPI9frequencyEi) refers to spi_api.o(i.spi_frequency) for spi_frequency
+ spi.o(i._ZN4mbed3SPI9frequencyEi) refers to spi.o(.data) for .data
+ spi.o(i._ZN4mbed3SPIC1E7PinNameS1_S1_S1_) refers to spi_api.o(i.spi_init) for spi_init
+ spi.o(i._ZN4mbed3SPIC1E7PinNameS1_S1_S1_) refers to spi_api.o(i.spi_format) for spi_format
+ spi.o(i._ZN4mbed3SPIC1E7PinNameS1_S1_S1_) refers to spi_api.o(i.spi_frequency) for spi_frequency
+ spi.o(i._ZN4mbed3SPIC1E7PinNameS1_S1_S1_) refers to spi.o(.constdata__ZTVN4mbed3SPIE) for vtable for mbed::SPI
+ spi.o(i._ZN4mbed3SPIC1E7PinNameS1_S1_S1_) refers to spi.o(.data) for .data
+ spi.o(.ARM.exidx) refers to spi.o(i._ZN4mbed3SPI6aquireEv) for i._ZN4mbed3SPI6aquireEv
+ spi.o(.ARM.exidx) refers to spi.o(i._ZN4mbed3SPIC1E7PinNameS1_S1_S1_) for i._ZN4mbed3SPIC1E7PinNameS1_S1_S1_
+ spi.o(.ARM.exidx) refers to spi.o(i._ZN4mbed3SPI6formatEii) for i._ZN4mbed3SPI6formatEii
+ spi.o(.ARM.exidx) refers to spi.o(i._ZN4mbed3SPI9frequencyEi) for i._ZN4mbed3SPI9frequencyEi
+ spi.o(.ARM.exidx) refers to spi.o(i._ZN4mbed3SPI5writeEi) for i._ZN4mbed3SPI5writeEi
+ spi.o(.ARM.exidx) refers to spi.o(i._ZN4mbed3SPI4lockEv) for i._ZN4mbed3SPI4lockEv
+ spi.o(.ARM.exidx) refers to spi.o(i._ZN4mbed3SPI6unlockEv) for i._ZN4mbed3SPI6unlockEv
+ spislave.o(i._ZN4mbed8SPISlave4readEv) refers to spi_api.o(i.spi_slave_read) for spi_slave_read
+ spislave.o(i._ZN4mbed8SPISlave5replyEi) refers to spi_api.o(i.spi_slave_write) for spi_slave_write
+ spislave.o(i._ZN4mbed8SPISlave6formatEii) refers to spi_api.o(i.spi_format) for spi_format
+ spislave.o(i._ZN4mbed8SPISlave7receiveEv) refers to spi_api.o(i.spi_slave_receive) for spi_slave_receive
+ spislave.o(i._ZN4mbed8SPISlave9frequencyEi) refers to spi_api.o(i.spi_frequency) for spi_frequency
+ spislave.o(i._ZN4mbed8SPISlaveC1E7PinNameS1_S1_S1_) refers to spi_api.o(i.spi_init) for spi_init
+ spislave.o(i._ZN4mbed8SPISlaveC1E7PinNameS1_S1_S1_) refers to spi_api.o(i.spi_format) for spi_format
+ spislave.o(i._ZN4mbed8SPISlaveC1E7PinNameS1_S1_S1_) refers to spi_api.o(i.spi_frequency) for spi_frequency
+ spislave.o(.ARM.exidx) refers to spislave.o(i._ZN4mbed8SPISlaveC1E7PinNameS1_S1_S1_) for i._ZN4mbed8SPISlaveC1E7PinNameS1_S1_S1_
+ spislave.o(.ARM.exidx) refers to spislave.o(i._ZN4mbed8SPISlave6formatEii) for i._ZN4mbed8SPISlave6formatEii
+ spislave.o(.ARM.exidx) refers to spislave.o(i._ZN4mbed8SPISlave9frequencyEi) for i._ZN4mbed8SPISlave9frequencyEi
+ spislave.o(.ARM.exidx) refers to spislave.o(i._ZN4mbed8SPISlave7receiveEv) for i._ZN4mbed8SPISlave7receiveEv
+ spislave.o(.ARM.exidx) refers to spislave.o(i._ZN4mbed8SPISlave4readEv) for i._ZN4mbed8SPISlave4readEv
+ spislave.o(.ARM.exidx) refers to spislave.o(i._ZN4mbed8SPISlave5replyEi) for i._ZN4mbed8SPISlave5replyEi
+ stream.o(i._ZN4mbed6Stream4getcEv) refers to fflush.o(.text) for fflush
+ stream.o(i._ZN4mbed6Stream4getcEv) refers to retarget.o(i._ZN4mbed9mbed_getcEPSt6__FILE) for mbed::mbed_getc(std::__FILE*)
+ stream.o(i._ZN4mbed6Stream4getsEPci) refers to fflush.o(.text) for fflush
+ stream.o(i._ZN4mbed6Stream4getsEPci) refers to retarget.o(i._ZN4mbed9mbed_getsEPciPSt6__FILE) for mbed::mbed_gets(char*, int, std::__FILE*)
+ stream.o(i._ZN4mbed6Stream4putcEi) refers to fflush.o(.text) for fflush
+ stream.o(i._ZN4mbed6Stream4putcEi) refers to fputc.o(i.fputc) for fputc
+ stream.o(i._ZN4mbed6Stream4putsEPKc) refers to fflush.o(.text) for fflush
+ stream.o(i._ZN4mbed6Stream4putsEPKc) refers to fputs.o(.text) for fputs
+ stream.o(i._ZN4mbed6Stream5scanfEPKcz) refers to fflush.o(.text) for fflush
+ stream.o(i._ZN4mbed6Stream5scanfEPKcz) refers to vfscanf.o(.text) for vfscanf
+ stream.o(i._ZN4mbed6Stream6printfEPKcz) refers to fflush.o(.text) for fflush
+ stream.o(i._ZN4mbed6Stream6printfEPKcz) refers to c89vfprintf.o(.text) for __c89vfprintf
+ stream.o(i._ZN4mbed6Stream6vscanfEPKcSt9__va_list) refers to fflush.o(.text) for fflush
+ stream.o(i._ZN4mbed6Stream6vscanfEPKcSt9__va_list) refers to vfscanf.o(.text) for vfscanf
+ stream.o(i._ZN4mbed6Stream7vprintfEPKcSt9__va_list) refers to fflush.o(.text) for fflush
+ stream.o(i._ZN4mbed6Stream7vprintfEPKcSt9__va_list) refers to c89vfprintf.o(.text) for __c89vfprintf
+ stream.o(i._ZN4mbed6StreamC2EPKc) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ stream.o(i._ZN4mbed6StreamC2EPKc) refers to _printf_p.o(.ARM.Collect$$_printf_percent$$00000002) for _printf_p
+ stream.o(i._ZN4mbed6StreamC2EPKc) refers to _printf_hex_int_ll_ptr.o(.text) for _printf_longlong_hex
+ stream.o(i._ZN4mbed6StreamC2EPKc) refers to filelike.o(i._ZN4mbed8FileLikeC2EPKc) for mbed::FileLike::FileLike__sub_object(const char*)
+ stream.o(i._ZN4mbed6StreamC2EPKc) refers to __2sprintf.o(.text) for __2sprintf
+ stream.o(i._ZN4mbed6StreamC2EPKc) refers to fopen.o(.text) for fopen
+ stream.o(i._ZN4mbed6StreamC2EPKc) refers to retarget.o(i._ZN4mbed26mbed_set_unbuffered_streamEPSt6__FILE) for mbed::mbed_set_unbuffered_stream(std::__FILE*)
+ stream.o(i._ZN4mbed6StreamC2EPKc) refers to stream.o(.constdata__ZTVN4mbed6StreamE) for vtable for mbed::Stream
+ stream.o(i._ZN4mbed6StreamD0Ev) refers to fclose.o(.text) for fclose
+ stream.o(i._ZN4mbed6StreamD0Ev) refers to filelike.o(i._ZN4mbed8FileLikeD2Ev) for mbed::FileLike::~FileLike__sub_object()
+ stream.o(i._ZN4mbed6StreamD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ stream.o(i._ZN4mbed6StreamD0Ev) refers to stream.o(.constdata__ZTVN4mbed6StreamE) for vtable for mbed::Stream
+ stream.o(i._ZN4mbed6StreamD2Ev) refers to fclose.o(.text) for fclose
+ stream.o(i._ZN4mbed6StreamD2Ev) refers to filelike.o(i._ZN4mbed8FileLikeD2Ev) for mbed::FileLike::~FileLike__sub_object()
+ stream.o(i._ZN4mbed6StreamD2Ev) refers to stream.o(.constdata__ZTVN4mbed6StreamE) for vtable for mbed::Stream
+ stream.o(i._ZThn4_N4mbed6StreamD0Ev) refers to fclose.o(.text) for fclose
+ stream.o(i._ZThn4_N4mbed6StreamD0Ev) refers to filelike.o(i._ZN4mbed8FileLikeD2Ev) for mbed::FileLike::~FileLike__sub_object()
+ stream.o(i._ZThn4_N4mbed6StreamD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ stream.o(i._ZThn4_N4mbed6StreamD0Ev) refers to stream.o(.constdata__ZTVN4mbed6StreamE) for vtable for mbed::Stream
+ stream.o(i._ZThn4_N4mbed6StreamD1Ev) refers to fclose.o(.text) for fclose
+ stream.o(i._ZThn4_N4mbed6StreamD1Ev) refers to filelike.o(i._ZN4mbed8FileLikeD2Ev) for mbed::FileLike::~FileLike__sub_object()
+ stream.o(i._ZThn4_N4mbed6StreamD1Ev) refers to stream.o(.constdata__ZTVN4mbed6StreamE) for vtable for mbed::Stream
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6StreamC2EPKc) for i._ZN4mbed6StreamC2EPKc
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6StreamD2Ev) for i._ZN4mbed6StreamD2Ev
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6StreamD0Ev) for i._ZN4mbed6StreamD0Ev
+ stream.o(.ARM.exidx) refers to stream.o(i._ZThn4_N4mbed6StreamD0Ev) for i._ZThn4_N4mbed6StreamD0Ev
+ stream.o(.ARM.exidx) refers to stream.o(i._ZThn4_N4mbed6StreamD1Ev) for i._ZThn4_N4mbed6StreamD1Ev
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream4putcEi) for i._ZN4mbed6Stream4putcEi
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream4putsEPKc) for i._ZN4mbed6Stream4putsEPKc
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream4getcEv) for i._ZN4mbed6Stream4getcEv
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream4getsEPci) for i._ZN4mbed6Stream4getsEPci
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream6printfEPKcz) for i._ZN4mbed6Stream6printfEPKcz
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream5scanfEPKcz) for i._ZN4mbed6Stream5scanfEPKcz
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream7vprintfEPKcSt9__va_list) for i._ZN4mbed6Stream7vprintfEPKcSt9__va_list
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream6vscanfEPKcSt9__va_list) for i._ZN4mbed6Stream6vscanfEPKcSt9__va_list
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream5closeEv) for i._ZN4mbed6Stream5closeEv
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream5writeEPKvj) for i._ZN4mbed6Stream5writeEPKvj
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream4readEPvj) for i._ZN4mbed6Stream4readEPvj
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream5lseekEli) for i._ZN4mbed6Stream5lseekEli
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream6isattyEv) for i._ZN4mbed6Stream6isattyEv
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream5fsyncEv) for i._ZN4mbed6Stream5fsyncEv
+ stream.o(.ARM.exidx) refers to stream.o(i._ZN4mbed6Stream4flenEv) for i._ZN4mbed6Stream4flenEv
+ ticker.o(i._ZN4mbed6Ticker5setupEj) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ ticker.o(i._ZN4mbed6Ticker5setupEj) refers to timerevent.o(i._ZN4mbed10TimerEvent6removeEv) for mbed::TimerEvent::remove()
+ ticker.o(i._ZN4mbed6Ticker5setupEj) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ ticker.o(i._ZN4mbed6Ticker5setupEj) refers to timerevent.o(i._ZN4mbed10TimerEvent6insertEj) for mbed::TimerEvent::insert(unsigned)
+ ticker.o(i._ZN4mbed6Ticker5setupEj) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ ticker.o(i._ZN4mbed6Ticker6detachEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ ticker.o(i._ZN4mbed6Ticker6detachEv) refers to timerevent.o(i._ZN4mbed10TimerEvent6removeEv) for mbed::TimerEvent::remove()
+ ticker.o(i._ZN4mbed6Ticker6detachEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ ticker.o(i._ZN4mbed6Ticker7handlerEv) refers to timerevent.o(i._ZN4mbed10TimerEvent6insertEj) for mbed::TimerEvent::insert(unsigned)
+ ticker.o(.ARM.exidx) refers to ticker.o(i._ZN4mbed6Ticker6detachEv) for i._ZN4mbed6Ticker6detachEv
+ ticker.o(.ARM.exidx) refers to ticker.o(i._ZN4mbed6Ticker5setupEj) for i._ZN4mbed6Ticker5setupEj
+ ticker.o(.ARM.exidx) refers to ticker.o(i._ZN4mbed6Ticker7handlerEv) for i._ZN4mbed6Ticker7handlerEv
+ timeout.o(.ARM.exidx) refers to timeout.o(i._ZN4mbed7Timeout7handlerEv) for i._ZN4mbed7Timeout7handlerEv
+ timer.o(i._ZN4mbed5Timer4readEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5Timer4readEv) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5Timer4readEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(i._ZN4mbed5Timer4stopEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5Timer4stopEv) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5Timer4stopEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(i._ZN4mbed5Timer5resetEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5Timer5resetEv) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5Timer5resetEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(i._ZN4mbed5Timer5startEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5Timer5startEv) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5Timer5startEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(i._ZN4mbed5Timer7read_msEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5Timer7read_msEv) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5Timer7read_msEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(i._ZN4mbed5Timer7read_usEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5Timer7read_usEv) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5Timer7read_usEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(i._ZN4mbed5Timer9slicetimeEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5Timer9slicetimeEv) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5Timer9slicetimeEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(i._ZN4mbed5TimerC1EPK13ticker_data_t) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5TimerC1EPK13ticker_data_t) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5TimerC1EPK13ticker_data_t) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(i._ZN4mbed5TimerC1Ev) refers to mbed_us_ticker_api.o(i.get_us_ticker_data) for get_us_ticker_data
+ timer.o(i._ZN4mbed5TimerC1Ev) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5TimerC1Ev) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5TimerC1Ev) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(i._ZN4mbed5TimercvfEv) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ timer.o(i._ZN4mbed5TimercvfEv) refers to mbed_ticker_api.o(i.ticker_read) for ticker_read
+ timer.o(i._ZN4mbed5TimercvfEv) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5Timer5resetEv) for i._ZN4mbed5Timer5resetEv
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5TimerC1Ev) for i._ZN4mbed5TimerC1Ev
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5TimerC1EPK13ticker_data_t) for i._ZN4mbed5TimerC1EPK13ticker_data_t
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5Timer5startEv) for i._ZN4mbed5Timer5startEv
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5Timer9slicetimeEv) for i._ZN4mbed5Timer9slicetimeEv
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5Timer4stopEv) for i._ZN4mbed5Timer4stopEv
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5Timer7read_usEv) for i._ZN4mbed5Timer7read_usEv
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5Timer4readEv) for i._ZN4mbed5Timer4readEv
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5Timer7read_msEv) for i._ZN4mbed5Timer7read_msEv
+ timer.o(.ARM.exidx) refers to timer.o(i._ZN4mbed5TimercvfEv) for i._ZN4mbed5TimercvfEv
+ timerevent.o(i._ZN4mbed10TimerEvent6insertEj) refers to mbed_ticker_api.o(i.ticker_insert_event) for ticker_insert_event
+ timerevent.o(i._ZN4mbed10TimerEvent6removeEv) refers to mbed_ticker_api.o(i.ticker_remove_event) for ticker_remove_event
+ timerevent.o(i._ZN4mbed10TimerEventC2EPK13ticker_data_t) refers to mbed_ticker_api.o(i.ticker_set_handler) for ticker_set_handler
+ timerevent.o(i._ZN4mbed10TimerEventC2EPK13ticker_data_t) refers to timerevent.o(.constdata__ZTVN4mbed10TimerEventE) for vtable for mbed::TimerEvent
+ timerevent.o(i._ZN4mbed10TimerEventC2EPK13ticker_data_t) refers to timerevent.o(i._ZN4mbed10TimerEvent3irqEj) for mbed::TimerEvent::irq(unsigned)
+ timerevent.o(i._ZN4mbed10TimerEventC2Ev) refers to mbed_us_ticker_api.o(i.get_us_ticker_data) for get_us_ticker_data
+ timerevent.o(i._ZN4mbed10TimerEventC2Ev) refers to mbed_ticker_api.o(i.ticker_set_handler) for ticker_set_handler
+ timerevent.o(i._ZN4mbed10TimerEventC2Ev) refers to timerevent.o(.constdata__ZTVN4mbed10TimerEventE) for vtable for mbed::TimerEvent
+ timerevent.o(i._ZN4mbed10TimerEventC2Ev) refers to timerevent.o(i._ZN4mbed10TimerEvent3irqEj) for mbed::TimerEvent::irq(unsigned)
+ timerevent.o(i._ZN4mbed10TimerEventD0Ev) refers to mbed_ticker_api.o(i.ticker_remove_event) for ticker_remove_event
+ timerevent.o(i._ZN4mbed10TimerEventD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ timerevent.o(i._ZN4mbed10TimerEventD0Ev) refers to timerevent.o(.constdata__ZTVN4mbed10TimerEventE) for vtable for mbed::TimerEvent
+ timerevent.o(i._ZN4mbed10TimerEventD2Ev) refers to mbed_ticker_api.o(i.ticker_remove_event) for ticker_remove_event
+ timerevent.o(i._ZN4mbed10TimerEventD2Ev) refers to timerevent.o(.constdata__ZTVN4mbed10TimerEventE) for vtable for mbed::TimerEvent
+ timerevent.o(.ARM.exidx) refers to timerevent.o(i._ZN4mbed10TimerEvent3irqEj) for i._ZN4mbed10TimerEvent3irqEj
+ timerevent.o(.ARM.exidx) refers to timerevent.o(i._ZN4mbed10TimerEventC2Ev) for i._ZN4mbed10TimerEventC2Ev
+ timerevent.o(.ARM.exidx) refers to timerevent.o(i._ZN4mbed10TimerEventC2EPK13ticker_data_t) for i._ZN4mbed10TimerEventC2EPK13ticker_data_t
+ timerevent.o(.ARM.exidx) refers to timerevent.o(i._ZN4mbed10TimerEvent6removeEv) for i._ZN4mbed10TimerEvent6removeEv
+ timerevent.o(.ARM.exidx) refers to timerevent.o(i._ZN4mbed10TimerEventD2Ev) for i._ZN4mbed10TimerEventD2Ev
+ timerevent.o(.ARM.exidx) refers to timerevent.o(i._ZN4mbed10TimerEventD0Ev) for i._ZN4mbed10TimerEventD0Ev
+ timerevent.o(.ARM.exidx) refers to timerevent.o(i._ZN4mbed10TimerEvent6insertEj) for i._ZN4mbed10TimerEvent6insertEj
+ main.o(i.__sti___8_main_cpp_myled) refers to mbed_gpio.o(i.gpio_init_out) for gpio_init_out
+ main.o(i.__sti___8_main_cpp_myled) refers to serial.o(i._ZN4mbed6SerialC1E7PinNameS1_PKc) for mbed::Serial::Serial(PinName, PinName, const char*)
+ main.o(i.__sti___8_main_cpp_myled) refers to aeabi_atexit.o(.text) for __aeabi_atexit
+ main.o(i.__sti___8_main_cpp_myled) refers to main.o(.bss) for .bss
+ main.o(i.__sti___8_main_cpp_myled) refers to serial.o(i._ZN4mbed6SerialD1Ev) for mbed::Serial::~Serial()
+ main.o(i.main) refers to serialbase.o(i._ZN4mbed10SerialBase4baudEi) for mbed::SerialBase::baud(int)
+ main.o(i.main) refers to mbed_wait_api.o(i.wait_ms) for wait_ms
+ main.o(i.main) refers to stm32f4xx_hal_rcc.o(i.HAL_RCC_GetSysClockFreq) for HAL_RCC_GetSysClockFreq
+ main.o(i.main) refers to stream.o(i._ZN4mbed6Stream6printfEPKcz) for mbed::Stream::printf(const char*, ...)
+ main.o(i.main) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ main.o(i.main) refers to mbed_wait_api.o(i.wait) for wait
+ main.o(i.main) refers to main.o(.bss) for .bss
+ main.o(.ARM.exidx) refers to main.o(i.main) for i.main
+ main.o(.ARM.exidx) refers to main.o(i.__sti___8_main_cpp_myled) for i.__sti___8_main_cpp_myled
+ main.o(.init_array) refers to main.o(i.__sti___8_main_cpp_myled) for __sti___8_main_cpp_myled
+ main.o(.init_array) refers to init_aeabi.o(.text) for __cpp_initialize__aeabi_
+ malloc.o(.text) refers (Special) to hguard.o(.text) for __heap$guard
+ malloc.o(.text) refers (Special) to init_alloc.o(.text) for _init_alloc
+ malloc.o(.text) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ malloc.o(.text) refers to heapstubs.o(.text) for __Heap_Alloc
+ free.o(.text) refers (Special) to hguard.o(.text) for __heap$guard
+ free.o(.text) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ free.o(.text) refers to heapstubs.o(.text) for __Heap_Free
+ h1_alloc.o(.text) refers (Special) to h1_init.o(.text) for __Heap_Initialize
+ h1_alloc.o(.text) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ h1_alloc.o(.text) refers to init_alloc.o(.text) for __Heap_Full
+ h1_free.o(.text) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ h1_alloc_mt.o(.text) refers (Special) to h1_init.o(.text) for __Heap_Initialize
+ h1_alloc_mt.o(.text) refers to init_alloc.o(.text) for __Heap_Full
+ h1_alloc_mt.o(.text) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ h1_free_mt.o(.text) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ heap2.o(i._FDIterate) refers to heap2.o(.conststring) for .conststring
+ heap2.o(i.___Heap_ProvideMemory$realtime) refers to fdtree.o(i._FDTree_Delete) for _FDTree_Delete
+ heap2.o(i.___Heap_ProvideMemory$realtime) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2.o(i.___Heap_Stats$realtime) refers to heap2.o(i._Heap2_StatsIterate) for _Heap2_StatsIterate
+ heap2.o(i.___Heap_Valid$realtime) refers to heap2.o(i._FDIterate) for _FDIterate
+ heap2.o(i.___Heap_Valid$realtime) refers to heap2.o(.conststring) for .conststring
+ heap2.o(i._free$realtime) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ heap2.o(i._free$realtime) refers to fdtree.o(i._FDTree_Delete) for _FDTree_Delete
+ heap2.o(i._free$realtime) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2.o(i._malloc$realtime) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ heap2.o(i._malloc$realtime) refers to fdtree.o(i._FDTree_FindFirst) for _FDTree_FindFirst
+ heap2.o(i._malloc$realtime) refers to init_alloc.o(.text) for __Heap_Full
+ heap2.o(i._malloc$realtime) refers to fdtree.o(i._FDTree_RemoveNode) for _FDTree_RemoveNode
+ heap2.o(i._malloc$realtime) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2.o(i._posix_memalign$realtime) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ heap2.o(i._posix_memalign$realtime) refers to fdtree.o(i._FDTree_FindFirst) for _FDTree_FindFirst
+ heap2.o(i._posix_memalign$realtime) refers to init_alloc.o(.text) for __Heap_Full
+ heap2.o(i._posix_memalign$realtime) refers to fdtree.o(i._FDTree_RemoveNode) for _FDTree_RemoveNode
+ heap2.o(i._posix_memalign$realtime) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2.o(i._realloc$realtime) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ heap2.o(i._realloc$realtime) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2.o(i._realloc$realtime) refers to h1_free.o(.text) for free
+ heap2.o(i._realloc$realtime) refers to h1_alloc.o(.text) for malloc
+ heap2.o(i._realloc$realtime) refers to fdtree.o(i._FDTree_Delete) for _FDTree_Delete
+ heap2.o(i._realloc$realtime) refers to rt_memcpy_w.o(.text) for __aeabi_memcpy4
+ heap2mt.o(i._FDIterate) refers to heap2mt.o(.conststring) for .conststring
+ heap2mt.o(i.___Heap_Initialize$realtime$concurrent) refers to mutex_dummy.o(.text) for _mutex_initialize
+ heap2mt.o(i.___Heap_ProvideMemory$realtime$concurrent) refers to fdtree.o(i._FDTree_Delete) for _FDTree_Delete
+ heap2mt.o(i.___Heap_ProvideMemory$realtime$concurrent) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2mt.o(i.___Heap_Stats$realtime$concurrent) refers to heap2mt.o(i._Heap2_StatsIterate) for _Heap2_StatsIterate
+ heap2mt.o(i.___Heap_Valid$realtime$concurrent) refers to heap2mt.o(i._FDIterate) for _FDIterate
+ heap2mt.o(i.___Heap_Valid$realtime$concurrent) refers to heap2mt.o(.conststring) for .conststring
+ heap2mt.o(i._free$realtime$concurrent) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ heap2mt.o(i._free$realtime$concurrent) refers to fdtree.o(i._FDTree_Delete) for _FDTree_Delete
+ heap2mt.o(i._free$realtime$concurrent) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2mt.o(i._malloc$realtime$concurrent) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ heap2mt.o(i._malloc$realtime$concurrent) refers to fdtree.o(i._FDTree_FindFirst) for _FDTree_FindFirst
+ heap2mt.o(i._malloc$realtime$concurrent) refers to init_alloc.o(.text) for __Heap_Full
+ heap2mt.o(i._malloc$realtime$concurrent) refers to fdtree.o(i._FDTree_RemoveNode) for _FDTree_RemoveNode
+ heap2mt.o(i._malloc$realtime$concurrent) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2mt.o(i._posix_memalign$realtime$concurrent) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ heap2mt.o(i._posix_memalign$realtime$concurrent) refers to fdtree.o(i._FDTree_FindFirst) for _FDTree_FindFirst
+ heap2mt.o(i._posix_memalign$realtime$concurrent) refers to init_alloc.o(.text) for __Heap_Full
+ heap2mt.o(i._posix_memalign$realtime$concurrent) refers to fdtree.o(i._FDTree_RemoveNode) for _FDTree_RemoveNode
+ heap2mt.o(i._posix_memalign$realtime$concurrent) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2mt.o(i._realloc$realtime$concurrent) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ heap2mt.o(i._realloc$realtime$concurrent) refers to fdtree.o(i._FDTree_Insert) for _FDTree_Insert
+ heap2mt.o(i._realloc$realtime$concurrent) refers to h1_free.o(.text) for free
+ heap2mt.o(i._realloc$realtime$concurrent) refers to h1_alloc.o(.text) for malloc
+ heap2mt.o(i._realloc$realtime$concurrent) refers to fdtree.o(i._FDTree_Delete) for _FDTree_Delete
+ heap2mt.o(i._realloc$realtime$concurrent) refers to rt_memcpy_w.o(.text) for __aeabi_memcpy4
+ vsprintf.o(.text) refers (Special) to _printf_a.o(.ARM.Collect$$_printf_percent$$00000006) for _printf_a
+ vsprintf.o(.text) refers (Special) to _printf_c.o(.ARM.Collect$$_printf_percent$$00000013) for _printf_c
+ vsprintf.o(.text) refers (Special) to _printf_charcount.o(.text) for _printf_charcount
+ vsprintf.o(.text) refers (Special) to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+ vsprintf.o(.text) refers (Special) to _printf_e.o(.ARM.Collect$$_printf_percent$$00000004) for _printf_e
+ vsprintf.o(.text) refers (Special) to _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) for _printf_f
+ vsprintf.o(.text) refers (Special) to printf1.o(x$fpl$printf1) for _printf_fp_dec
+ vsprintf.o(.text) refers (Special) to printf2.o(x$fpl$printf2) for _printf_fp_hex
+ vsprintf.o(.text) refers (Special) to _printf_g.o(.ARM.Collect$$_printf_percent$$00000005) for _printf_g
+ vsprintf.o(.text) refers (Special) to _printf_i.o(.ARM.Collect$$_printf_percent$$00000008) for _printf_i
+ vsprintf.o(.text) refers (Special) to _printf_dec.o(.text) for _printf_int_dec
+ vsprintf.o(.text) refers (Special) to _printf_l.o(.ARM.Collect$$_printf_percent$$00000012) for _printf_l
+ vsprintf.o(.text) refers (Special) to _printf_lc.o(.ARM.Collect$$_printf_percent$$00000015) for _printf_lc
+ vsprintf.o(.text) refers (Special) to _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007) for _printf_ll
+ vsprintf.o(.text) refers (Special) to _printf_lld.o(.ARM.Collect$$_printf_percent$$0000000E) for _printf_lld
+ vsprintf.o(.text) refers (Special) to _printf_lli.o(.ARM.Collect$$_printf_percent$$0000000D) for _printf_lli
+ vsprintf.o(.text) refers (Special) to _printf_llo.o(.ARM.Collect$$_printf_percent$$00000010) for _printf_llo
+ vsprintf.o(.text) refers (Special) to _printf_llu.o(.ARM.Collect$$_printf_percent$$0000000F) for _printf_llu
+ vsprintf.o(.text) refers (Special) to _printf_llx.o(.ARM.Collect$$_printf_percent$$00000011) for _printf_llx
+ vsprintf.o(.text) refers (Special) to _printf_longlong_dec.o(.text) for _printf_longlong_dec
+ vsprintf.o(.text) refers (Special) to _printf_hex_int_ll_ptr.o(.text) for _printf_longlong_hex
+ vsprintf.o(.text) refers (Special) to _printf_oct_int_ll.o(.text) for _printf_longlong_oct
+ vsprintf.o(.text) refers (Special) to _printf_ls.o(.ARM.Collect$$_printf_percent$$00000016) for _printf_ls
+ vsprintf.o(.text) refers (Special) to _printf_n.o(.ARM.Collect$$_printf_percent$$00000001) for _printf_n
+ vsprintf.o(.text) refers (Special) to _printf_o.o(.ARM.Collect$$_printf_percent$$0000000B) for _printf_o
+ vsprintf.o(.text) refers (Special) to _printf_p.o(.ARM.Collect$$_printf_percent$$00000002) for _printf_p
+ vsprintf.o(.text) refers (Special) to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ vsprintf.o(.text) refers (Special) to _printf_pad.o(.text) for _printf_post_padding
+ vsprintf.o(.text) refers (Special) to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+ vsprintf.o(.text) refers (Special) to _printf_str.o(.text) for _printf_str
+ vsprintf.o(.text) refers (Special) to _printf_truncate.o(.text) for _printf_truncate_signed
+ vsprintf.o(.text) refers (Special) to _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A) for _printf_u
+ vsprintf.o(.text) refers (Special) to _printf_wctomb.o(.text) for _printf_wctomb
+ vsprintf.o(.text) refers (Special) to _printf_x.o(.ARM.Collect$$_printf_percent$$0000000C) for _printf_x
+ vsprintf.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+ vsprintf.o(.text) refers to _sputc.o(.text) for _sputc
+ c89vfprintf.o(.text) refers (Special) to _printf_a.o(.ARM.Collect$$_printf_percent$$00000006) for _printf_a
+ c89vfprintf.o(.text) refers (Special) to _printf_c.o(.ARM.Collect$$_printf_percent$$00000013) for _printf_c
+ c89vfprintf.o(.text) refers (Special) to _printf_charcount.o(.text) for _printf_charcount
+ c89vfprintf.o(.text) refers (Special) to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+ c89vfprintf.o(.text) refers (Special) to _printf_e.o(.ARM.Collect$$_printf_percent$$00000004) for _printf_e
+ c89vfprintf.o(.text) refers (Special) to _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) for _printf_f
+ c89vfprintf.o(.text) refers (Special) to printf1.o(x$fpl$printf1) for _printf_fp_dec
+ c89vfprintf.o(.text) refers (Special) to _printf_g.o(.ARM.Collect$$_printf_percent$$00000005) for _printf_g
+ c89vfprintf.o(.text) refers (Special) to _printf_i.o(.ARM.Collect$$_printf_percent$$00000008) for _printf_i
+ c89vfprintf.o(.text) refers (Special) to _printf_dec.o(.text) for _printf_int_dec
+ c89vfprintf.o(.text) refers (Special) to _printf_l.o(.ARM.Collect$$_printf_percent$$00000012) for _printf_l
+ c89vfprintf.o(.text) refers (Special) to _printf_lc.o(.ARM.Collect$$_printf_percent$$00000015) for _printf_lc
+ c89vfprintf.o(.text) refers (Special) to _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007) for _printf_ll
+ c89vfprintf.o(.text) refers (Special) to _printf_lld.o(.ARM.Collect$$_printf_percent$$0000000E) for _printf_lld
+ c89vfprintf.o(.text) refers (Special) to _printf_lli.o(.ARM.Collect$$_printf_percent$$0000000D) for _printf_lli
+ c89vfprintf.o(.text) refers (Special) to _printf_llo.o(.ARM.Collect$$_printf_percent$$00000010) for _printf_llo
+ c89vfprintf.o(.text) refers (Special) to _printf_llu.o(.ARM.Collect$$_printf_percent$$0000000F) for _printf_llu
+ c89vfprintf.o(.text) refers (Special) to _printf_llx.o(.ARM.Collect$$_printf_percent$$00000011) for _printf_llx
+ c89vfprintf.o(.text) refers (Special) to _printf_longlong_dec.o(.text) for _printf_longlong_dec
+ c89vfprintf.o(.text) refers (Special) to _printf_hex_int_ll_ptr.o(.text) for _printf_longlong_hex
+ c89vfprintf.o(.text) refers (Special) to _printf_oct_int_ll.o(.text) for _printf_longlong_oct
+ c89vfprintf.o(.text) refers (Special) to _printf_ls.o(.ARM.Collect$$_printf_percent$$00000016) for _printf_ls
+ c89vfprintf.o(.text) refers (Special) to _printf_n.o(.ARM.Collect$$_printf_percent$$00000001) for _printf_n
+ c89vfprintf.o(.text) refers (Special) to _printf_o.o(.ARM.Collect$$_printf_percent$$0000000B) for _printf_o
+ c89vfprintf.o(.text) refers (Special) to _printf_p.o(.ARM.Collect$$_printf_percent$$00000002) for _printf_p
+ c89vfprintf.o(.text) refers (Special) to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ c89vfprintf.o(.text) refers (Special) to _printf_pad.o(.text) for _printf_post_padding
+ c89vfprintf.o(.text) refers (Special) to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+ c89vfprintf.o(.text) refers (Special) to _printf_str.o(.text) for _printf_str
+ c89vfprintf.o(.text) refers (Special) to _printf_truncate.o(.text) for _printf_truncate_signed
+ c89vfprintf.o(.text) refers (Special) to _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A) for _printf_u
+ c89vfprintf.o(.text) refers (Special) to _printf_wctomb.o(.text) for _printf_wctomb
+ c89vfprintf.o(.text) refers (Special) to _printf_x.o(.ARM.Collect$$_printf_percent$$0000000C) for _printf_x
+ c89vfprintf.o(.text) refers to _printf_char_file.o(.text) for _printf_char_file
+ c89vsprintf.o(.text) refers (Special) to _printf_a.o(.ARM.Collect$$_printf_percent$$00000006) for _printf_a
+ c89vsprintf.o(.text) refers (Special) to _printf_c.o(.ARM.Collect$$_printf_percent$$00000013) for _printf_c
+ c89vsprintf.o(.text) refers (Special) to _printf_charcount.o(.text) for _printf_charcount
+ c89vsprintf.o(.text) refers (Special) to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+ c89vsprintf.o(.text) refers (Special) to _printf_e.o(.ARM.Collect$$_printf_percent$$00000004) for _printf_e
+ c89vsprintf.o(.text) refers (Special) to _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) for _printf_f
+ c89vsprintf.o(.text) refers (Special) to printf1.o(x$fpl$printf1) for _printf_fp_dec
+ c89vsprintf.o(.text) refers (Special) to _printf_g.o(.ARM.Collect$$_printf_percent$$00000005) for _printf_g
+ c89vsprintf.o(.text) refers (Special) to _printf_i.o(.ARM.Collect$$_printf_percent$$00000008) for _printf_i
+ c89vsprintf.o(.text) refers (Special) to _printf_dec.o(.text) for _printf_int_dec
+ c89vsprintf.o(.text) refers (Special) to _printf_l.o(.ARM.Collect$$_printf_percent$$00000012) for _printf_l
+ c89vsprintf.o(.text) refers (Special) to _printf_lc.o(.ARM.Collect$$_printf_percent$$00000015) for _printf_lc
+ c89vsprintf.o(.text) refers (Special) to _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007) for _printf_ll
+ c89vsprintf.o(.text) refers (Special) to _printf_lld.o(.ARM.Collect$$_printf_percent$$0000000E) for _printf_lld
+ c89vsprintf.o(.text) refers (Special) to _printf_lli.o(.ARM.Collect$$_printf_percent$$0000000D) for _printf_lli
+ c89vsprintf.o(.text) refers (Special) to _printf_llo.o(.ARM.Collect$$_printf_percent$$00000010) for _printf_llo
+ c89vsprintf.o(.text) refers (Special) to _printf_llu.o(.ARM.Collect$$_printf_percent$$0000000F) for _printf_llu
+ c89vsprintf.o(.text) refers (Special) to _printf_llx.o(.ARM.Collect$$_printf_percent$$00000011) for _printf_llx
+ c89vsprintf.o(.text) refers (Special) to _printf_longlong_dec.o(.text) for _printf_longlong_dec
+ c89vsprintf.o(.text) refers (Special) to _printf_hex_int_ll_ptr.o(.text) for _printf_longlong_hex
+ c89vsprintf.o(.text) refers (Special) to _printf_oct_int_ll.o(.text) for _printf_longlong_oct
+ c89vsprintf.o(.text) refers (Special) to _printf_ls.o(.ARM.Collect$$_printf_percent$$00000016) for _printf_ls
+ c89vsprintf.o(.text) refers (Special) to _printf_n.o(.ARM.Collect$$_printf_percent$$00000001) for _printf_n
+ c89vsprintf.o(.text) refers (Special) to _printf_o.o(.ARM.Collect$$_printf_percent$$0000000B) for _printf_o
+ c89vsprintf.o(.text) refers (Special) to _printf_p.o(.ARM.Collect$$_printf_percent$$00000002) for _printf_p
+ c89vsprintf.o(.text) refers (Special) to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ c89vsprintf.o(.text) refers (Special) to _printf_pad.o(.text) for _printf_post_padding
+ c89vsprintf.o(.text) refers (Special) to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+ c89vsprintf.o(.text) refers (Special) to _printf_str.o(.text) for _printf_str
+ c89vsprintf.o(.text) refers (Special) to _printf_truncate.o(.text) for _printf_truncate_signed
+ c89vsprintf.o(.text) refers (Special) to _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A) for _printf_u
+ c89vsprintf.o(.text) refers (Special) to _printf_wctomb.o(.text) for _printf_wctomb
+ c89vsprintf.o(.text) refers (Special) to _printf_x.o(.ARM.Collect$$_printf_percent$$0000000C) for _printf_x
+ c89vsprintf.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+ c89vsprintf.o(.text) refers to _sputc.o(.text) for _sputc
+ c89vsnprintf.o(.text) refers (Special) to _printf_a.o(.ARM.Collect$$_printf_percent$$00000006) for _printf_a
+ c89vsnprintf.o(.text) refers (Special) to _printf_c.o(.ARM.Collect$$_printf_percent$$00000013) for _printf_c
+ c89vsnprintf.o(.text) refers (Special) to _printf_charcount.o(.text) for _printf_charcount
+ c89vsnprintf.o(.text) refers (Special) to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+ c89vsnprintf.o(.text) refers (Special) to _printf_e.o(.ARM.Collect$$_printf_percent$$00000004) for _printf_e
+ c89vsnprintf.o(.text) refers (Special) to _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) for _printf_f
+ c89vsnprintf.o(.text) refers (Special) to printf1.o(x$fpl$printf1) for _printf_fp_dec
+ c89vsnprintf.o(.text) refers (Special) to _printf_g.o(.ARM.Collect$$_printf_percent$$00000005) for _printf_g
+ c89vsnprintf.o(.text) refers (Special) to _printf_i.o(.ARM.Collect$$_printf_percent$$00000008) for _printf_i
+ c89vsnprintf.o(.text) refers (Special) to _printf_dec.o(.text) for _printf_int_dec
+ c89vsnprintf.o(.text) refers (Special) to _printf_l.o(.ARM.Collect$$_printf_percent$$00000012) for _printf_l
+ c89vsnprintf.o(.text) refers (Special) to _printf_lc.o(.ARM.Collect$$_printf_percent$$00000015) for _printf_lc
+ c89vsnprintf.o(.text) refers (Special) to _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007) for _printf_ll
+ c89vsnprintf.o(.text) refers (Special) to _printf_lld.o(.ARM.Collect$$_printf_percent$$0000000E) for _printf_lld
+ c89vsnprintf.o(.text) refers (Special) to _printf_lli.o(.ARM.Collect$$_printf_percent$$0000000D) for _printf_lli
+ c89vsnprintf.o(.text) refers (Special) to _printf_llo.o(.ARM.Collect$$_printf_percent$$00000010) for _printf_llo
+ c89vsnprintf.o(.text) refers (Special) to _printf_llu.o(.ARM.Collect$$_printf_percent$$0000000F) for _printf_llu
+ c89vsnprintf.o(.text) refers (Special) to _printf_llx.o(.ARM.Collect$$_printf_percent$$00000011) for _printf_llx
+ c89vsnprintf.o(.text) refers (Special) to _printf_longlong_dec.o(.text) for _printf_longlong_dec
+ c89vsnprintf.o(.text) refers (Special) to _printf_hex_int_ll_ptr.o(.text) for _printf_longlong_hex
+ c89vsnprintf.o(.text) refers (Special) to _printf_oct_int_ll.o(.text) for _printf_longlong_oct
+ c89vsnprintf.o(.text) refers (Special) to _printf_ls.o(.ARM.Collect$$_printf_percent$$00000016) for _printf_ls
+ c89vsnprintf.o(.text) refers (Special) to _printf_n.o(.ARM.Collect$$_printf_percent$$00000001) for _printf_n
+ c89vsnprintf.o(.text) refers (Special) to _printf_o.o(.ARM.Collect$$_printf_percent$$0000000B) for _printf_o
+ c89vsnprintf.o(.text) refers (Special) to _printf_p.o(.ARM.Collect$$_printf_percent$$00000002) for _printf_p
+ c89vsnprintf.o(.text) refers (Special) to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ c89vsnprintf.o(.text) refers (Special) to _printf_pad.o(.text) for _printf_post_padding
+ c89vsnprintf.o(.text) refers (Special) to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+ c89vsnprintf.o(.text) refers (Special) to _printf_str.o(.text) for _printf_str
+ c89vsnprintf.o(.text) refers (Special) to _printf_truncate.o(.text) for _printf_truncate_signed
+ c89vsnprintf.o(.text) refers (Special) to _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A) for _printf_u
+ c89vsnprintf.o(.text) refers (Special) to _printf_wctomb.o(.text) for _printf_wctomb
+ c89vsnprintf.o(.text) refers (Special) to _printf_x.o(.ARM.Collect$$_printf_percent$$0000000C) for _printf_x
+ c89vsnprintf.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+ c89vsnprintf.o(.text) refers to _sputc.o(.text) for _sputc
+ c89vsnprintf.o(.text) refers to _snputc.o(.text) for _snputc
+ __2printf.o(.text) refers to _printf_char_file.o(.text) for _printf_char_file
+ __2printf.o(.text) refers to stdio_streams.o(.bss) for __stdout
+ __2sprintf.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+ __2sprintf.o(.text) refers to _sputc.o(.text) for _sputc
+ noretval__2printf.o(.text) refers to _printf_char_file.o(.text) for _printf_char_file
+ noretval__2printf.o(.text) refers to stdio_streams.o(.bss) for __stdout
+ noretval__2sprintf.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+ noretval__2sprintf.o(.text) refers to _sputc.o(.text) for _sputc
+ __printf.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ _printf_dec.o(.text) refers (Weak) to _printf_truncate.o(.text) for _printf_truncate_signed
+ _printf_dec.o(.text) refers (Weak) to _printf_truncate.o(.text) for _printf_truncate_unsigned
+ _printf_dec.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_hex_ll.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_hex_ll.o(.text) refers to _printf_hex_ll.o(.constdata) for .constdata
+ _printf_hex_int.o(.text) refers (Weak) to _printf_truncate.o(.text) for _printf_truncate_unsigned
+ _printf_hex_int.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_hex_int.o(.text) refers to _printf_hex_int.o(.constdata) for .constdata
+ _printf_hex_int_ll.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_hex_int_ll.o(.text) refers (Weak) to _printf_truncate.o(.text) for _printf_truncate_unsigned
+ _printf_hex_int_ll.o(.text) refers to _printf_hex_int_ll.o(.constdata) for .constdata
+ _printf_hex_ptr.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_hex_ptr.o(.text) refers to _printf_hex_ptr.o(.constdata) for .constdata
+ _printf_hex_int_ptr.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_hex_int_ptr.o(.text) refers (Weak) to _printf_truncate.o(.text) for _printf_truncate_unsigned
+ _printf_hex_int_ptr.o(.text) refers to _printf_hex_int_ptr.o(.constdata) for .constdata
+ _printf_hex_ll_ptr.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_hex_ll_ptr.o(.text) refers to _printf_hex_ll_ptr.o(.constdata) for .constdata
+ _printf_hex_int_ll_ptr.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_hex_int_ll_ptr.o(.text) refers (Weak) to _printf_truncate.o(.text) for _printf_truncate_unsigned
+ _printf_hex_int_ll_ptr.o(.text) refers to _printf_hex_int_ll_ptr.o(.constdata) for .constdata
+ __printf_flags.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ __printf_flags.o(.text) refers to __printf_flags.o(.constdata) for .constdata
+ __printf_ss.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ __printf_flags_ss.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ __printf_flags_ss.o(.text) refers to __printf_flags_ss.o(.constdata) for .constdata
+ __printf_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit
+ __printf_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ __printf_flags_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit
+ __printf_flags_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ __printf_flags_wp.o(.text) refers to __printf_flags_wp.o(.constdata) for .constdata
+ __printf_ss_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit
+ __printf_ss_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ __printf_flags_ss_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit
+ __printf_flags_ss_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+ __printf_flags_ss_wp.o(.text) refers to __printf_flags_ss_wp.o(.constdata) for .constdata
+ _printf_p.o(.ARM.Collect$$_printf_percent$$00000002) refers (Weak) to _printf_hex_int_ll_ptr.o(.text) for _printf_hex_ptr
+ _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A) refers (Weak) to _printf_dec.o(.text) for _printf_int_dec
+ _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) refers (Special) to _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017) for _printf_percent_end
+ vfscanf.o(.text) refers (Special) to _scanf_int.o(.text) for _scanf_int
+ vfscanf.o(.text) refers (Special) to _scanf_longlong.o(.text) for _scanf_longlong
+ vfscanf.o(.text) refers (Special) to _scanf_mbtowc.o(.text) for _scanf_mbtowc
+ vfscanf.o(.text) refers (Special) to scanf1.o(x$fpl$scanf1) for _scanf_real
+ vfscanf.o(.text) refers (Special) to _scanf_str.o(.text) for _scanf_string
+ vfscanf.o(.text) refers (Special) to _scanf_wctomb.o(.text) for _scanf_wctomb
+ vfscanf.o(.text) refers (Special) to _scanf_wstr.o(.text) for _scanf_wstring
+ vfscanf.o(.text) refers to scanf_char_file.o(.text) for __vfscanf_char_file
+ __0sscanf.o(.text) refers to scanf_char.o(.text) for __vfscanf_char
+ __0sscanf.o(.text) refers to _sgetc.o(.text) for _sgetc
+ _scanf_int.o(.text) refers to _chval.o(.text) for _chval
+ fflush.o(.text) refers to stdio.o(.text) for _fflush
+ fflush.o(.text) refers to fseek.o(.text) for _fseek
+ fflush.o(.text) refers to stdio_streams.o(.bss) for __stdin
+ fgetc.o(i.fgetc) refers to filbuf.o(.text) for __filbuf_byte
+ fgets.o(.text) refers to fgetc.o(i.fgetc) for fgetc
+ fgets.o(.text) refers to ferror.o(.text) for ferror
+ fputc.o(i.fputc) refers to flsbuf.o(.text) for __flsbuf_byte
+ fputs.o(.text) refers to fputc.o(i.fputc) for fputc
+ fopen.o(.text) refers to fclose.o(.text) for _fclose_internal
+ fopen.o(.text) refers to retarget.o(i._sys_open) for _sys_open
+ fopen.o(.text) refers to fseek.o(.text) for _fseek
+ fopen.o(.text) refers to h1_alloc.o(.text) for malloc
+ fopen.o(.text) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ fopen.o(.text) refers to stdio_streams.o(.bss) for __stdin
+ setbuf.o(.text) refers to setvbuf.o(.text) for setvbuf
+ stdio_streams.o(.bss) refers (Special) to initio.o(.text) for _initio
+ stdio_streams.o(.bss) refers (Special) to initio.o(.text) for _initio
+ stdio_streams.o(.bss) refers (Special) to initio.o(.text) for _initio
+ stdio_streams.o(.data) refers (Special) to initio.o(.text) for _initio
+ stdio_streams.o(.data) refers (Special) to initio.o(.text) for _initio
+ stdio_streams.o(.data) refers (Special) to initio.o(.text) for _initio
+ fclose.o(.text) refers to stdio.o(.text) for _fflush
+ fclose.o(.text) refers to retarget.o(i._sys_close) for _sys_close
+ fclose.o(.text) refers to h1_free.o(.text) for free
+ fclose.o(.text) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ fclose_locked.o(.text) refers to fclose.o(.text) for _fclose_internal
+ fclose_locked.o(.text) refers to streamlock.o(.data) for _stream_list_lock
+ fflush_locked.o(.text) refers to stdio.o(.text) for _fflush
+ fflush_locked.o(.text) refers to fseek.o(.text) for _fseek
+ fflush_locked.o(.text) refers to fflush.o(.text) for _do_fflush
+ fflush_locked.o(.text) refers to streamlock.o(.data) for _stream_list_lock
+ fflush_locked.o(.text) refers to stdio_streams.o(.bss) for __stdin
+ fopen_locked.o(.text) refers to fclose.o(.text) for _fclose_internal
+ fopen_locked.o(.text) refers to retarget.o(i._sys_open) for _sys_open
+ fopen_locked.o(.text) refers to fseek.o(.text) for _fseek
+ fopen_locked.o(.text) refers to h1_alloc.o(.text) for malloc
+ fopen_locked.o(.text) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ fopen_locked.o(.text) refers to streamlock.o(.data) for _stream_list_lock
+ fopen_locked.o(.text) refers to stdio_streams.o(.bss) for __stdin
+ atexit_aeabi.o(.text) refers to aeabi_atexit.o(.text) for __aeabi_atexit
+ atexit_aeabi.o(.ARM.exidx) refers to atexit_aeabi.o(.text) for .text
+ aeabi_atexit.o(.text) refers (Special) to cxa_finalize.o(.text) for __cxa_finalize
+ aeabi_atexit.o(.text) refers to h1_alloc.o(.text) for malloc
+ aeabi_atexit.o(.text) refers to rt_ddtor_pointer_addr.o(.text) for __rt_ddtor_pointer_addr
+ aeabi_atexit.o(.ARM.exidx) refers (Special) to cxa_finalize.o(.text) for __cxa_finalize
+ aeabi_atexit.o(.ARM.exidx) refers to aeabi_atexit.o(.text) for .text
+ strncpy.o(.text) refers to rt_memclr.o(.text) for __aeabi_memclr
+ localtime.o(.text) refers to localtime_internal.o(.text) for _localtime_r
+ localtime.o(.text) refers to localtime.o(.bss) for .bss
+ mktime.o(.text) refers to _monlen.o(.constdata) for _monlen
+ __main.o(!!!main) refers to __rtentry.o(.ARM.Collect$$rtentry$$00000000) for __rt_entry
+ init_aeabi.o(.emb_text) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000031) for __rt_lib_init_cpp_2
+ init_aeabi.o(.init_array) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000031) for __rt_lib_init_cpp_2
+ init_aeabi.o(.init_array) refers to init_aeabi.o(.text) for __cpp_initialize__aeabi_
+ init_aeabi.o(.dummy_text) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000031) for __rt_lib_init_cpp_2
+ init_aeabi.o(.text) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000031) for __rt_lib_init_cpp_2
+ init_aeabi.o(.ARM.exidx) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000031) for __rt_lib_init_cpp_2
+ init_aeabi.o(.ARM.exidx) refers to init_aeabi.o(.text) for .text
+ pure_virt.o(i.__cxa_pure_virtual) refers to defsig_pvfn_outer.o(.text) for __rt_SIGPVFN
+ pure_virt.o(.ARM.exidx) refers to pure_virt.o(i.__cxa_pure_virtual) for i.__cxa_pure_virtual
+ lib_rtti_impl.o(i._ZN10__cxxabiv116__enum_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv116__enum_type_infoD1Ev) for __cxxabiv1::__enum_type_info::~__enum_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv117__array_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__array_type_infoD1Ev) for __cxxabiv1::__array_type_info::~__array_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv117__class_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__class_type_infoD1Ev) for __cxxabiv1::__class_type_info::~__class_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv117__pbase_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__pbase_type_infoD1Ev) for __cxxabiv1::__pbase_type_info::~__pbase_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv119__pointer_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv119__pointer_type_infoD1Ev) for __cxxabiv1::__pointer_type_info::~__pointer_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv119__pointer_type_infoD1Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__pbase_type_infoD1Ev) for __cxxabiv1::__pbase_type_info::~__pbase_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv120__function_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__function_type_infoD1Ev) for __cxxabiv1::__function_type_info::~__function_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv120__si_class_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__si_class_type_infoD1Ev) for __cxxabiv1::__si_class_type_info::~__si_class_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv120__si_class_type_infoD1Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__class_type_infoD1Ev) for __cxxabiv1::__class_type_info::~__class_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv121__vmi_class_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv121__vmi_class_type_infoD1Ev) for __cxxabiv1::__vmi_class_type_info::~__vmi_class_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv121__vmi_class_type_infoD1Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__class_type_infoD1Ev) for __cxxabiv1::__class_type_info::~__class_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv123__fundamental_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv123__fundamental_type_infoD1Ev) for __cxxabiv1::__fundamental_type_info::~__fundamental_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv129__pointer_to_member_type_infoD0Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv129__pointer_to_member_type_infoD1Ev) for __cxxabiv1::__pointer_to_member_type_info::~__pointer_to_member_type_info()
+ lib_rtti_impl.o(i._ZN10__cxxabiv129__pointer_to_member_type_infoD1Ev) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__pbase_type_infoD1Ev) for __cxxabiv1::__pbase_type_info::~__pbase_type_info()
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv123__fundamental_type_infoD1Ev) for i._ZN10__cxxabiv123__fundamental_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv123__fundamental_type_infoD0Ev) for i._ZN10__cxxabiv123__fundamental_type_infoD0Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__array_type_infoD1Ev) for i._ZN10__cxxabiv117__array_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__array_type_infoD0Ev) for i._ZN10__cxxabiv117__array_type_infoD0Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__function_type_infoD1Ev) for i._ZN10__cxxabiv120__function_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__function_type_infoD0Ev) for i._ZN10__cxxabiv120__function_type_infoD0Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv116__enum_type_infoD1Ev) for i._ZN10__cxxabiv116__enum_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv116__enum_type_infoD0Ev) for i._ZN10__cxxabiv116__enum_type_infoD0Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__class_type_infoD1Ev) for i._ZN10__cxxabiv117__class_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__class_type_infoD0Ev) for i._ZN10__cxxabiv117__class_type_infoD0Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__si_class_type_infoD1Ev) for i._ZN10__cxxabiv120__si_class_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__si_class_type_infoD0Ev) for i._ZN10__cxxabiv120__si_class_type_infoD0Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv121__vmi_class_type_infoD1Ev) for i._ZN10__cxxabiv121__vmi_class_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv121__vmi_class_type_infoD0Ev) for i._ZN10__cxxabiv121__vmi_class_type_infoD0Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__pbase_type_infoD1Ev) for i._ZN10__cxxabiv117__pbase_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__pbase_type_infoD0Ev) for i._ZN10__cxxabiv117__pbase_type_infoD0Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv119__pointer_type_infoD1Ev) for i._ZN10__cxxabiv119__pointer_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv119__pointer_type_infoD0Ev) for i._ZN10__cxxabiv119__pointer_type_infoD0Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv129__pointer_to_member_type_infoD1Ev) for i._ZN10__cxxabiv129__pointer_to_member_type_infoD1Ev
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZN10__cxxabiv129__pointer_to_member_type_infoD0Ev) for i._ZN10__cxxabiv129__pointer_to_member_type_infoD0Ev
+ aeabi_vec_ctor_nocookie_nodtor.o(.ARM.exidx) refers to aeabi_vec_ctor_nocookie_nodtor.o(i.__aeabi_vec_ctor_nocookie_nodtor) for i.__aeabi_vec_ctor_nocookie_nodtor
+ aeabi_vec_ctor_nocookie_nodtor.o(.ARM.exidx) refers to unwind_pr0.o(.text) for __aeabi_unwind_cpp_pr0
+ __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) for __rt_entry_li
+ __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) for __rt_entry_main
+ __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$0000000C) for __rt_entry_postli_1
+ __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$00000009) for __rt_entry_postsh_1
+ __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$00000002) for __rt_entry_presh_1
+ __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry4.o(.ARM.Collect$$rtentry$$00000004) for __rt_entry_sh
+ rt_heap_descriptor.o(.text) refers to rt_heap_descriptor.o(.bss) for __rt_heap_descriptor_data
+ rt_heap_descriptor_intlibspace.o(.text) refers to libspace.o(.bss) for __libspace_start
+ rt_ddtor_pointer_addr.o(.text) refers to rt_ddtor_pointer_addr.o(.bss) for __rt_ddtor_pointer_addr_data
+ rt_ddtor_pointer_addr_intlibspace.o(.text) refers to libspace.o(.bss) for __libspace_start
+ init_alloc.o(.text) refers (Special) to hguard.o(.text) for __heap$guard
+ init_alloc.o(.text) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000005) for __rt_lib_init_heap_2
+ init_alloc.o(.text) refers (Special) to maybetermalloc1.o(.emb_text) for _maybe_terminate_alloc
+ init_alloc.o(.text) refers to heapauxa.o(.text) for __rt_heap_expand
+ init_alloc.o(.text) refers to h1_extend.o(.text) for __Heap_ProvideMemory
+ init_alloc.o(.text) refers to defsig_rtmem_outer.o(.text) for __rt_SIGRTMEM
+ init_alloc.o(.text) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ init_alloc.o(.text) refers to h1_init.o(.text) for __Heap_Initialize
+ h1_init_mt.o(.text) refers to mutex_dummy.o(.text) for _mutex_initialize
+ _printf_str.o(.text) refers (Special) to _printf_char.o(.text) for _printf_cs_common
+ _printf_str.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding
+ _printf_str.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_post_padding
+ _printf_intcommon.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding
+ _printf_intcommon.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding
+ _printf_intcommon.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_post_padding
+ _printf_char_common.o(.text) refers to __printf_flags_ss_wp.o(.text) for __printf
+ _printf_char_file.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+ _printf_char_file.o(.text) refers to ferror.o(.text) for ferror
+ _printf_char_file.o(.text) refers to fputc.o(i.fputc) for fputc
+ _printf_wctomb.o(.text) refers (Special) to _printf_wchar.o(.text) for _printf_lcs_common
+ _printf_wctomb.o(.text) refers to _wcrtomb.o(.text) for _wcrtomb
+ _printf_wctomb.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding
+ _printf_wctomb.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_post_padding
+ _printf_wctomb.o(.text) refers to _printf_wctomb.o(.constdata) for .constdata
+ _printf_wctomb.o(.constdata) refers (Special) to _printf_wchar.o(.text) for _printf_lcs_common
+ _printf_longlong_dec.o(.text) refers to lludiv10.o(.text) for _ll_udiv10
+ _printf_longlong_dec.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_oct_ll.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_oct_int.o(.text) refers (Weak) to _printf_truncate.o(.text) for _printf_truncate_unsigned
+ _printf_oct_int.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_oct_int_ll.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+ _printf_oct_int_ll.o(.text) refers (Weak) to _printf_truncate.o(.text) for _printf_truncate_unsigned
+ _printf_c.o(.ARM.Collect$$_printf_percent$$00000013) refers (Weak) to _printf_char.o(.text) for _printf_char
+ _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) refers (Weak) to _printf_char.o(.text) for _printf_string
+ _printf_n.o(.ARM.Collect$$_printf_percent$$00000001) refers (Weak) to _printf_charcount.o(.text) for _printf_charcount
+ _printf_x.o(.ARM.Collect$$_printf_percent$$0000000C) refers (Weak) to _printf_hex_int_ll_ptr.o(.text) for _printf_int_hex
+ _printf_o.o(.ARM.Collect$$_printf_percent$$0000000B) refers (Weak) to _printf_oct_int_ll.o(.text) for _printf_int_oct
+ _printf_i.o(.ARM.Collect$$_printf_percent$$00000008) refers (Weak) to _printf_dec.o(.text) for _printf_int_dec
+ _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) refers (Weak) to _printf_dec.o(.text) for _printf_int_dec
+ _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) refers (Weak) to printf1.o(x$fpl$printf1) for _printf_fp_dec
+ _printf_e.o(.ARM.Collect$$_printf_percent$$00000004) refers (Weak) to printf1.o(x$fpl$printf1) for _printf_fp_dec
+ _printf_g.o(.ARM.Collect$$_printf_percent$$00000005) refers (Weak) to printf1.o(x$fpl$printf1) for _printf_fp_dec
+ _printf_a.o(.ARM.Collect$$_printf_percent$$00000006) refers (Weak) to printf2.o(x$fpl$printf2) for _printf_fp_hex
+ _printf_lli.o(.ARM.Collect$$_printf_percent$$0000000D) refers (Special) to _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007) for _printf_ll
+ _printf_lli.o(.ARM.Collect$$_printf_percent$$0000000D) refers (Weak) to _printf_longlong_dec.o(.text) for _printf_longlong_dec
+ _printf_lld.o(.ARM.Collect$$_printf_percent$$0000000E) refers (Special) to _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007) for _printf_ll
+ _printf_lld.o(.ARM.Collect$$_printf_percent$$0000000E) refers (Weak) to _printf_longlong_dec.o(.text) for _printf_longlong_dec
+ _printf_llu.o(.ARM.Collect$$_printf_percent$$0000000F) refers (Special) to _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007) for _printf_ll
+ _printf_llu.o(.ARM.Collect$$_printf_percent$$0000000F) refers (Weak) to _printf_longlong_dec.o(.text) for _printf_longlong_dec
+ _printf_lc.o(.ARM.Collect$$_printf_percent$$00000015) refers (Special) to _printf_l.o(.ARM.Collect$$_printf_percent$$00000012) for _printf_l
+ _printf_lc.o(.ARM.Collect$$_printf_percent$$00000015) refers (Weak) to _printf_wchar.o(.text) for _printf_wchar
+ _printf_ls.o(.ARM.Collect$$_printf_percent$$00000016) refers (Special) to _printf_l.o(.ARM.Collect$$_printf_percent$$00000012) for _printf_l
+ _printf_ls.o(.ARM.Collect$$_printf_percent$$00000016) refers (Weak) to _printf_wchar.o(.text) for _printf_wstring
+ _printf_llo.o(.ARM.Collect$$_printf_percent$$00000010) refers (Special) to _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007) for _printf_ll
+ _printf_llo.o(.ARM.Collect$$_printf_percent$$00000010) refers (Weak) to _printf_oct_int_ll.o(.text) for _printf_ll_oct
+ _printf_llx.o(.ARM.Collect$$_printf_percent$$00000011) refers (Special) to _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007) for _printf_ll
+ _printf_llx.o(.ARM.Collect$$_printf_percent$$00000011) refers (Weak) to _printf_hex_int_ll_ptr.o(.text) for _printf_ll_hex
+ _scanf_longlong.o(.text) refers to _chval.o(.text) for _chval
+ scanf_char.o(.text) refers to _scanf.o(.text) for __vfscanf
+ scanf_char.o(.text) refers to isspace.o(.text) for isspace
+ scanf_char_file.o(.text) refers to scanf_char.o(.text) for __vfscanf_char
+ scanf_char_file.o(.text) refers to fgetc.o(i.fgetc) for fgetc
+ scanf_char_file.o(.text) refers to backspace.o(.text) for __backspace
+ _scanf_mbtowc.o(.text) refers to _mbrtowc.o(.text) for _mbrtowc
+ _scanf_wctomb.o(.text) refers to _wcrtomb.o(.text) for _wcrtomb
+ _scanf_wctomb.o(.text) refers to _scanf_wcharmap.o(.text) for _scanf_wcharmap
+ _scanf_wstr.o(.text) refers to _scanf_wcharmap.o(.text) for _scanf_wcharmap
+ filbuf.o(.text) refers to retarget.o(i._sys_read) for _sys_read
+ filbuf.o(.text) refers to stdio.o(.text) for _seterr
+ filbuf.o(.text) refers to h1_alloc.o(.text) for malloc
+ filbuf.o(.text) refers to retarget.o(i._sys_seek) for _sys_seek
+ filbuf.o(.text) refers to flushlinebuffered.o(.text) for _flushlinebuffered
+ flsbuf.o(.text) refers to stdio.o(.text) for _deferredlazyseek
+ flsbuf.o(.text) refers to retarget.o(i._sys_flen) for _sys_flen
+ flsbuf.o(.text) refers to retarget.o(i._sys_istty) for _sys_istty
+ flsbuf.o(.text) refers to h1_alloc.o(.text) for malloc
+ fseek.o(.text) refers to retarget.o(i._sys_istty) for _sys_istty
+ fseek.o(.text) refers to ftell.o(.text) for _ftell_internal
+ fseek.o(.text) refers to retarget.o(i._sys_flen) for _sys_flen
+ fseek.o(.text) refers to stdio.o(.text) for _seterr
+ stdio.o(.text) refers to retarget.o(i._sys_seek) for _sys_seek
+ stdio.o(.text) refers to retarget.o(i._sys_write) for _sys_write
+ streamlock.o(.data) refers (Special) to initio.o(.text) for _initio
+ initio.o(.text) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000024) for __rt_lib_init_stdio_2
+ initio.o(.text) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000004) for __rt_lib_shutdown_stdio_2
+ initio.o(.text) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ initio.o(.text) refers to fopen.o(.text) for freopen
+ initio.o(.text) refers to defsig_rtred_outer.o(.text) for __rt_SIGRTRED
+ initio.o(.text) refers to setvbuf.o(.text) for setvbuf
+ initio.o(.text) refers to fclose.o(.text) for _fclose_internal
+ initio.o(.text) refers to h1_free.o(.text) for free
+ initio.o(.text) refers to stdio_streams.o(.bss) for __stdin
+ initio.o(.text) refers to stdio_streams.o(.bss) for __stdout
+ initio.o(.text) refers to stdio_streams.o(.bss) for __stderr
+ initio.o(.text) refers to stdio_streams.o(.data) for __aeabi_stdin
+ initio.o(.text) refers to stdio_streams.o(.data) for __aeabi_stdout
+ initio.o(.text) refers to stdio_streams.o(.data) for __aeabi_stderr
+ initio.o(.text) refers to retarget.o(.constdata) for __stdin_name
+ initio_locked.o(.text) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000024) for __rt_lib_init_stdio_2
+ initio_locked.o(.text) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000004) for __rt_lib_shutdown_stdio_2
+ initio_locked.o(.text) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ initio_locked.o(.text) refers to fopen.o(.text) for freopen
+ initio_locked.o(.text) refers to defsig_rtred_outer.o(.text) for __rt_SIGRTRED
+ initio_locked.o(.text) refers to setvbuf.o(.text) for setvbuf
+ initio_locked.o(.text) refers to fclose.o(.text) for _fclose_internal
+ initio_locked.o(.text) refers to h1_free.o(.text) for free
+ initio_locked.o(.text) refers to stdio_streams.o(.bss) for __stdin
+ initio_locked.o(.text) refers to stdio_streams.o(.bss) for __stdout
+ initio_locked.o(.text) refers to stdio_streams.o(.bss) for __stderr
+ initio_locked.o(.text) refers to stdio_streams.o(.data) for __aeabi_stdin
+ initio_locked.o(.text) refers to stdio_streams.o(.data) for __aeabi_stdout
+ initio_locked.o(.text) refers to stdio_streams.o(.data) for __aeabi_stderr
+ initio_locked.o(.text) refers to streamlock.o(.data) for _stream_list_lock
+ initio_locked.o(.text) refers to retarget.o(.constdata) for __stdin_name
+ cxa_finalize.o(.text) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000002) for __rt_lib_shutdown_cpp_2
+ cxa_finalize.o(.text) refers to rt_ddtor_pointer_addr.o(.text) for __rt_ddtor_pointer_addr
+ cxa_finalize.o(.text) refers to h1_free.o(.text) for free
+ cxa_finalize.o(.ARM.exidx) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000002) for __rt_lib_shutdown_cpp_2
+ cxa_finalize.o(.ARM.exidx) refers to cxa_finalize.o(.text) for .text
+ defsig_pvfn_outer.o(.text) refers to defsig_pvfn_inner.o(.text) for __rt_SIGPVFN_inner
+ defsig_pvfn_outer.o(.text) refers to defsig_exit.o(.text) for __sig_exit
+ defsig_pvfn_formal.o(.text) refers to rt_raise.o(.text) for __rt_raise
+ rt_memclr.o(.text) refers to rt_memclr_w.o(.text) for _memset_w
+ localtime_internal.o(.text) refers to rt_memclr_w.o(.text) for __aeabi_memclr4
+ localtime_internal.o(.text) refers to _monlen.o(.constdata) for _monlen
+ _get_argv.o(.text) refers (Special) to hrguard.o(.text) for __heap_region$guard
+ _get_argv.o(.text) refers to h1_alloc.o(.text) for malloc
+ _get_argv.o(.text) refers to defsig_rtmem_outer.o(.text) for __rt_SIGRTMEM
+ _get_argv.o(.text) refers to retarget.o(i._sys_command_string) for _sys_command_string
+ libinit2.o(.ARM.Collect$$libinit$$00000001) refers to fpinit.o(x$fpl$fpinit) for _fp_init
+ libinit2.o(.ARM.Collect$$libinit$$00000005) refers (Weak) to init_alloc.o(.text) for _init_alloc
+ libinit2.o(.ARM.Collect$$libinit$$0000000F) refers (Weak) to rt_locale.o(.text) for __rt_locale
+ libinit2.o(.ARM.Collect$$libinit$$00000010) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+ libinit2.o(.ARM.Collect$$libinit$$00000012) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+ libinit2.o(.ARM.Collect$$libinit$$00000012) refers (Weak) to lc_ctype_c.o(locale$$code) for _get_lc_ctype
+ libinit2.o(.ARM.Collect$$libinit$$00000014) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+ libinit2.o(.ARM.Collect$$libinit$$00000016) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+ libinit2.o(.ARM.Collect$$libinit$$00000016) refers (Weak) to lc_numeric_c.o(locale$$code) for _get_lc_numeric
+ libinit2.o(.ARM.Collect$$libinit$$00000018) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+ libinit2.o(.ARM.Collect$$libinit$$00000024) refers (Weak) to initio.o(.text) for _initio
+ libinit2.o(.ARM.Collect$$libinit$$00000026) refers to argv_veneer.o(.emb_text) for __ARM_argv_veneer
+ libinit2.o(.ARM.Collect$$libinit$$00000027) refers to argv_veneer.o(.emb_text) for __ARM_argv_veneer
+ libinit2.o(.ARM.Collect$$libinit$$00000031) refers (Weak) to init_aeabi.o(.text) for __cpp_initialize__aeabi_
+ filbuf_fwide.o(.text) refers to filbuf.o(.text) for __filbuf
+ flsbuf_fwide.o(.text) refers to flsbuf.o(.text) for __flsbuf
+ type_info_dtor.o(.ARM.exidx) refers to type_info_dtor.o(i._ZNSt9type_infoD1Ev) for i._ZNSt9type_infoD1Ev
+ type_info_dtor.o(.ARM.exidx) refers to type_info_dtor.o(i._ZNSt9type_infoD0Ev) for i._ZNSt9type_infoD0Ev
+ arm_exceptions_callterm.o(.text) refers to arm_exceptions_globs.o(.text) for __cxa_get_globals
+ arm_exceptions_callterm.o(.text) refers to arm_exceptions_support.o(.text) for __ARM::is_foreign_exception(_Unwind_Control_Block*)
+ arm_exceptions_callterm.o(.text) refers to arm_exceptions_terminate.o(.text) for std::terminate()
+ arm_exceptions_callterm.o(.ARM.exidx) refers to arm_exceptions_callterm.o(.text) for .text
+ unwind_pr0.o(.text) refers to unwind_prcommon.o(.text) for __ARM_unwind_cpp_prcommon
+ unwind_pr0.o(.ARM.exidx) refers to unwind_pr0.o(.text) for .text
+ printf1.o(x$fpl$printf1) refers to _printf_fp_dec.o(.text) for _printf_fp_dec_real
+ printf2.o(x$fpl$printf2) refers to _printf_fp_hex.o(.text) for _printf_fp_hex_real
+ printf2b.o(x$fpl$printf2) refers to _printf_fp_hex.o(.text) for _printf_fp_hex_real
+ scanf1.o(x$fpl$scanf1) refers to scanf_fp.o(.text) for _scanf_really_real
+ libspace.o(.text) refers to libspace.o(.bss) for __libspace_start
+ __rtentry2.o(.ARM.Collect$$rtentry$$00000008) refers to boardinit2.o(.text) for _platform_post_stackheap_init
+ __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) refers to libinit.o(.ARM.Collect$$libinit$$00000000) for __rt_lib_init
+ __rtentry2.o(.ARM.Collect$$rtentry$$0000000B) refers to boardinit3.o(.text) for _platform_post_lib_init
+ __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) refers to retarget.o(i.$Sub$$main) for main
+ __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) refers to retarget.o(i.exit) for exit
+ __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$00000001) for .ARM.Collect$$rtentry$$00000001
+ __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$00000008) for .ARM.Collect$$rtentry$$00000008
+ __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) for .ARM.Collect$$rtentry$$0000000A
+ __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$0000000B) for .ARM.Collect$$rtentry$$0000000B
+ __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) for .ARM.Collect$$rtentry$$0000000D
+ __rtentry4.o(.ARM.Collect$$rtentry$$00000004) refers to sys.o(i.__user_setup_stackheap) for __user_setup_stackheap
+ __rtentry4.o(.ARM.exidx) refers to __rtentry4.o(.ARM.Collect$$rtentry$$00000004) for .ARM.Collect$$rtentry$$00000004
+ rt_raise.o(.text) refers to __raise.o(.text) for __raise
+ rt_raise.o(.text) refers to sys_exit.o(.text) for _sys_exit
+ maybetermalloc2.o(.emb_text) refers (Special) to term_alloc.o(.text) for _terminate_alloc
+ h1_extend.o(.text) refers to h1_free.o(.text) for free
+ h1_extend_mt.o(.text) refers to h1_free_mt.o(.text) for _free_internal
+ isspace.o(.text) refers to rt_ctype_table.o(.text) for __rt_ctype_table
+ _printf_fp_dec.o(.text) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ _printf_fp_dec.o(.text) refers (Special) to lc_numeric_c.o(locale$$code) for _get_lc_numeric
+ _printf_fp_dec.o(.text) refers to bigflt0.o(.text) for _btod_etento
+ _printf_fp_dec.o(.text) refers to btod.o(CL$$btod_d2e) for _btod_d2e
+ _printf_fp_dec.o(.text) refers to btod.o(CL$$btod_ediv) for _btod_ediv
+ _printf_fp_dec.o(.text) refers to btod.o(CL$$btod_emul) for _btod_emul
+ _printf_fp_dec.o(.text) refers to lludiv10.o(.text) for _ll_udiv10
+ _printf_fp_dec.o(.text) refers to fpclassify.o(i.__ARM_fpclassify) for __ARM_fpclassify
+ _printf_fp_dec.o(.text) refers to _printf_fp_infnan.o(.text) for _printf_fp_infnan
+ _printf_fp_dec.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding
+ _printf_fp_dec.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding
+ _printf_fp_dec.o(.text) refers to rt_locale.o(.text) for __rt_locale
+ _printf_fp_dec.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_post_padding
+ _printf_fp_hex.o(.text) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ _printf_fp_hex.o(.text) refers to fpclassify.o(i.__ARM_fpclassify) for __ARM_fpclassify
+ _printf_fp_hex.o(.text) refers to _printf_fp_infnan.o(.text) for _printf_fp_infnan
+ _printf_fp_hex.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding
+ _printf_fp_hex.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding
+ _printf_fp_hex.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_post_padding
+ _printf_fp_hex.o(.text) refers to _printf_fp_hex.o(.constdata) for .constdata
+ _printf_fp_hex.o(.constdata) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ _printf_char.o(.text) refers (Weak) to _printf_str.o(.text) for _printf_str
+ _printf_char_file_locked.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+ _printf_char_file_locked.o(.text) refers to fputc.o(i._fputc$unlocked) for _fputc$unlocked
+ _printf_wchar.o(.text) refers (Weak) to _printf_wctomb.o(.text) for _printf_wctomb
+ _scanf.o(.text) refers (Weak) to scanf1.o(x$fpl$scanf1) for _scanf_real
+ _scanf.o(.text) refers (Weak) to _scanf_longlong.o(.text) for _scanf_longlong
+ _scanf.o(.text) refers (Weak) to _scanf_int.o(.text) for _scanf_int
+ _scanf.o(.text) refers (Weak) to _scanf_wstr.o(.text) for _scanf_wstring
+ _scanf.o(.text) refers (Weak) to _scanf_mbtowc.o(.text) for _scanf_mbtowc
+ _scanf.o(.text) refers (Weak) to _scanf_str.o(.text) for _scanf_string
+ _scanf.o(.text) refers (Weak) to _scanf_wctomb.o(.text) for _scanf_wctomb
+ scanf_fp.o(.text) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ scanf_fp.o(.text) refers (Special) to lc_numeric_c.o(locale$$code) for _get_lc_numeric
+ scanf_fp.o(.text) refers to rt_errno_addr.o(.text) for __aeabi_errno_addr
+ scanf_fp.o(.text) refers to bigflt0.o(.text) for _btod_etento
+ scanf_fp.o(.text) refers to btod.o(CL$$btod_emuld) for _btod_emuld
+ scanf_fp.o(.text) refers to btod.o(CL$$btod_edivd) for _btod_edivd
+ scanf_fp.o(.text) refers to rt_locale.o(.text) for __rt_locale
+ scanf_fp.o(.text) refers to scanf2.o(x$fpl$scanf2) for _scanf_infnan
+ scanf_fp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit
+ scanf_fp.o(.text) refers to narrow.o(i.__mathlib_narrow) for __mathlib_narrow
+ scanf_fp.o(.text) refers to fpconst.o(c$$dinf) for __huge_val
+ scanf_char_file_locked.o(.text) refers to scanf_char.o(.text) for __vfscanf_char
+ scanf_char_file_locked.o(.text) refers to fgetc.o(i._fgetc$unlocked) for _fgetc$unlocked
+ scanf_char_file_locked.o(.text) refers to backspace.o(.text) for ___backspace$unlocked
+ backspace.o(.text) refers to ungetc.o(.text) for _ungetc_internal
+ ftell.o(.text) refers to rt_errno_addr.o(.text) for __aeabi_errno_addr
+ freadfast.o(.text) refers to filbuf.o(.text) for _readbuf
+ freadfast.o(.text) refers to rt_memcpy_v6.o(.text) for __aeabi_memcpy
+ fread_bytes_avail.o(.text) refers to filbuf.o(.text) for __filbuf_byte
+ fread_bytes_avail.o(.text) refers to rt_memcpy_v6.o(.text) for __aeabi_memcpy
+ fwritefast.o(.text) refers to stdio.o(.text) for _writebuf
+ fwritefast.o(.text) refers to flsbuf.o(.text) for __flsbuf_byte
+ fwritefast.o(.text) refers to rt_memcpy_v6.o(.text) for __aeabi_memcpy
+ flushlinebuffered.o(.text) refers to fflush.o(.text) for _do_fflush
+ flushlinebuffered.o(.text) refers to stdio_streams.o(.bss) for __stdin
+ freadfast_locked.o(.text) refers to filbuf.o(.text) for _readbuf
+ freadfast_locked.o(.text) refers to rt_memcpy_v6.o(.text) for __aeabi_memcpy
+ fread_bytes_avail_locked.o(.text) refers to filbuf.o(.text) for __filbuf_byte
+ fread_bytes_avail_locked.o(.text) refers to rt_memcpy_v6.o(.text) for __aeabi_memcpy
+ fwritefast_locked.o(.text) refers to stdio.o(.text) for _writebuf
+ fwritefast_locked.o(.text) refers to flsbuf.o(.text) for __flsbuf_byte
+ fwritefast_locked.o(.text) refers to rt_memcpy_v6.o(.text) for __aeabi_memcpy
+ flushlinebuffered_locked.o(.text) refers to fflush.o(.text) for _do_fflush
+ flushlinebuffered_locked.o(.text) refers to streamlock.o(.data) for _stream_list_lock
+ flushlinebuffered_locked.o(.text) refers to stdio_streams.o(.bss) for __stdin
+ _mbrtowc.o(.text) refers to rt_ctype_table.o(.text) for __rt_ctype_table
+ _wcrtomb.o(.text) refers to rt_ctype_table.o(.text) for __rt_ctype_table
+ defsig_exit.o(.text) refers to sys_exit.o(.text) for _sys_exit
+ defsig_rtred_outer.o(.text) refers to defsig_rtred_inner.o(.text) for __rt_SIGRTRED_inner
+ defsig_rtred_outer.o(.text) refers to defsig_exit.o(.text) for __sig_exit
+ defsig_rtred_formal.o(.text) refers to rt_raise.o(.text) for __rt_raise
+ defsig_rtmem_outer.o(.text) refers to defsig_rtmem_inner.o(.text) for __rt_SIGRTMEM_inner
+ defsig_rtmem_outer.o(.text) refers to defsig_exit.o(.text) for __sig_exit
+ defsig_rtmem_formal.o(.text) refers to rt_raise.o(.text) for __rt_raise
+ defsig_pvfn_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+ assert_stdio.o(.text) refers to fputs.o(.text) for fputs
+ assert_stdio.o(.text) refers to fflush.o(.text) for fflush
+ assert_stdio.o(.text) refers to stdio_streams.o(.bss) for __stderr
+ heapauxa.o(.text) refers to heapauxa.o(.data) for .data
+ argv_veneer.o(.emb_text) refers to no_argv.o(.text) for __ARM_get_argv
+ libshutdown2.o(.ARM.Collect$$libshutdown$$00000001) refers (Weak) to cxa_finalize.o(.text) for __cxa_finalize
+ libshutdown2.o(.ARM.Collect$$libshutdown$$00000003) refers (Weak) to initio.o(.text) for _terminateio
+ libshutdown2.o(.ARM.Collect$$libshutdown$$0000000D) refers (Weak) to term_alloc.o(.text) for _terminate_alloc
+ arm_begincatch_noexceptions.o(.ARM.exidx) refers to arm_begincatch_noexceptions.o(.text) for .text
+ arm_exceptions_support.o(.text) refers to arm_exceptions_support.o(.constdata) for .constdata
+ arm_exceptions_support.o(.ARM.exidx) refers to arm_exceptions_support.o(.text) for .text
+ arm_exceptions_terminate.o(.text) refers to arm_exceptions_globs.o(.text) for __cxa_get_globals
+ arm_exceptions_terminate.o(.text) refers to abort.o(.text) for abort
+ arm_exceptions_terminate.o(.ARM.exidx) refers to arm_exceptions_terminate.o(.text) for .text
+ arm_exceptions_globs.o(.text) refers to abort.o(.text) for abort
+ arm_exceptions_globs.o(.text) refers to rt_eh_globals_addr.o(.text) for __rt_eh_globals_addr
+ arm_exceptions_globs.o(.text) refers to h1_alloc.o(.text) for malloc
+ arm_exceptions_globs.o(.text) refers to arm_exceptions_mem.o(.text) for __ARM_exceptions_buffer_init
+ arm_exceptions_globs.o(.ARM.exidx) refers to arm_exceptions_globs.o(.text) for .text
+ unwind_prcommon.o(.text) refers to unwinder.o(.text) for _Unwind_VRS_Get
+ unwind_prcommon.o(.text) refers to unwind_activity.o(.emb_text) for _Unwind_Activity
+ unwind_prcommon.o(.ARM.exidx) refers to unwind_prcommon.o(.text) for .text
+ sys_exit.o(.text) refers (Special) to use_no_semi.o(.text) for __I$use$semihosting
+ sys_exit.o(.text) refers (Special) to indicate_semi.o(.text) for __semihosting_library_function
+ rt_ctype_table.o(.text) refers to rt_locale.o(.text) for __rt_locale
+ rt_ctype_table.o(.text) refers to lc_ctype_c.o(locale$$code) for _get_lc_ctype
+ rt_locale.o(.text) refers to rt_locale.o(.bss) for __rt_locale_data
+ rt_locale_intlibspace.o(.text) refers to libspace.o(.bss) for __libspace_start
+ rt_eh_globals_addr.o(.text) refers to rt_eh_globals_addr.o(.bss) for __rt_eh_globals_addr_data
+ rt_eh_globals_addr_intlibspace.o(.text) refers to libspace.o(.bss) for __libspace_start
+ rt_errno_addr.o(.text) refers to rt_errno_addr.o(.bss) for __aeabi_errno_addr_data
+ rt_errno_addr_intlibspace.o(.text) refers to libspace.o(.bss) for __libspace_start
+ term_alloc.o(.text) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$0000000F) for __rt_lib_shutdown_heap_2
+ term_alloc.o(.text) refers to rt_heap_descriptor.o(.text) for __rt_heap_descriptor
+ term_alloc.o(.text) refers to h1_final.o(.text) for __Heap_Finalize
+ _printf_fp_infnan.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding
+ _printf_fp_infnan.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_post_padding
+ bigflt0.o(.text) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ bigflt0.o(.text) refers to btod.o(CL$$btod_emul) for _btod_emul
+ bigflt0.o(.text) refers to btod.o(CL$$btod_ediv) for _btod_ediv
+ bigflt0.o(.text) refers to bigflt0.o(.constdata) for .constdata
+ bigflt0.o(.constdata) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_d2e) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_d2e) refers to btod.o(CL$$btod_d2e_norm_op1) for _d2e_norm_op1
+ btod.o(CL$$btod_d2e_norm_op1) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_d2e_norm_op1) refers to btod.o(CL$$btod_d2e_denorm_low) for _d2e_denorm_low
+ btod.o(CL$$btod_d2e_denorm_low) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_emul) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_emul) refers to btod.o(CL$$btod_mult_common) for __btod_mult_common
+ btod.o(CL$$btod_emul) refers to btod.o(CL$$btod_e2e) for _e2e
+ btod.o(CL$$btod_ediv) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_ediv) refers to btod.o(CL$$btod_div_common) for __btod_div_common
+ btod.o(CL$$btod_ediv) refers to btod.o(CL$$btod_e2e) for _e2e
+ btod.o(CL$$btod_emuld) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_emuld) refers to btod.o(CL$$btod_mult_common) for __btod_mult_common
+ btod.o(CL$$btod_emuld) refers to btod.o(CL$$btod_e2d) for _e2d
+ btod.o(CL$$btod_edivd) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_edivd) refers to btod.o(CL$$btod_div_common) for __btod_div_common
+ btod.o(CL$$btod_edivd) refers to btod.o(CL$$btod_e2d) for _e2d
+ btod.o(CL$$btod_e2e) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_e2d) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_e2d) refers to btod.o(CL$$btod_e2e) for _e2e
+ btod.o(CL$$btod_mult_common) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ btod.o(CL$$btod_div_common) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ lc_numeric_c.o(locale$$data) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000016) for __rt_lib_init_lc_numeric_2
+ lc_numeric_c.o(locale$$code) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000016) for __rt_lib_init_lc_numeric_2
+ lc_numeric_c.o(locale$$code) refers to strcmpv7m.o(.text) for strcmp
+ lc_numeric_c.o(locale$$code) refers to lc_numeric_c.o(locale$$data) for __lcnum_c_name
+ abort.o(.text) refers to defsig_abrt_outer.o(.text) for __rt_SIGABRT
+ abort.o(.text) refers to sys_exit.o(.text) for _sys_exit
+ __raise.o(.text) refers to defsig.o(CL$$defsig) for __default_signal_handler
+ defsig_general.o(.text) refers to sys_wrch.o(.text) for _ttywrch
+ defsig_rtred_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+ defsig_rtmem_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+ rt_memcpy_v6.o(.text) refers to rt_memcpy_w.o(.text) for __aeabi_memcpy4
+ _get_argv_nomalloc.o(.text) refers (Special) to hrguard.o(.text) for __heap_region$guard
+ _get_argv_nomalloc.o(.text) refers to defsig_rtmem_outer.o(.text) for __rt_SIGRTMEM
+ _get_argv_nomalloc.o(.text) refers to retarget.o(i._sys_command_string) for _sys_command_string
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000002E) for __rt_lib_init_alloca_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000002C) for __rt_lib_init_argv_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000001B) for __rt_lib_init_atexit_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000021) for __rt_lib_init_clock_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000032) for __rt_lib_init_cpp_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000030) for __rt_lib_init_exceptions_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000001) for __rt_lib_init_fp_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000001F) for __rt_lib_init_fp_trap_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000023) for __rt_lib_init_getenv_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000000A) for __rt_lib_init_heap_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000011) for __rt_lib_init_lc_collate_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000013) for __rt_lib_init_lc_ctype_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000015) for __rt_lib_init_lc_monetary_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000017) for __rt_lib_init_lc_numeric_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000019) for __rt_lib_init_lc_time_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000004) for __rt_lib_init_preinit_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000000E) for __rt_lib_init_rand_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000033) for __rt_lib_init_return
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000001D) for __rt_lib_init_signal_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000025) for __rt_lib_init_stdio_1
+ libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000000C) for __rt_lib_init_user_alloc_1
+ arm_exceptions_mem.o(.text) refers to h1_alloc.o(.text) for malloc
+ arm_exceptions_mem.o(.ARM.exidx) refers to arm_exceptions_mem.o(.text) for .text
+ unwinder.o(.emb_text) refers to unwinder.o(.text) for __ARM_Unwind_RaiseException
+ unwinder.o(.text) refers to bsearchnoex.o(.text) for bsearch
+ unwinder.o(.text) refers to unwind_activity.o(.emb_text) for _Unwind_Activity
+ unwinder.o(.text) refers to abort.o(.text) for abort
+ unwinder.o(.text) refers to unwinder.o(.emb_text) for __ARM_Unwind_VRS_corerestore
+ unwinder.o(.text) refers to h1_alloc.o(.text) for malloc
+ unwinder.o(.text) refers to rt_memcpy_w.o(.text) for __aeabi_memcpy4
+ unwinder.o(.text) refers to h1_free.o(.text) for free
+ unwinder.o(.text) refers (Weak) to unwind_pr0.o(.text) for __aeabi_unwind_cpp_pr0
+ unwinder.o(.ARM.exidx) refers to unwinder.o(.text) for .text
+ fpconst.o(c$$dinf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ fpconst.o(c$$dnan) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ fpconst.o(c$$finf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ istatus.o(x$fpl$ieeestatus) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ scanf2.o(x$fpl$scanf2) refers to scanf_hexfp.o(.text) for _scanf_really_hex_real
+ scanf2.o(x$fpl$scanf2) refers to scanf_infnan.o(.text) for _scanf_really_infnan
+ scanf2b.o(x$fpl$scanf2) refers to scanf_hexfp.o(.text) for _scanf_really_hex_real
+ scanf2b.o(x$fpl$scanf2) refers to scanf_infnan.o(.text) for _scanf_really_infnan
+ fpclassify.o(i.__ARM_fpclassify) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ narrow.o(i.__hardfp___mathlib_tofloat) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ narrow.o(i.__hardfp___mathlib_tofloat) refers to frexp.o(i.frexp) for frexp
+ narrow.o(i.__hardfp___mathlib_tofloat) refers to deqf.o(x$fpl$deqf) for __aeabi_cdcmpeq
+ narrow.o(i.__hardfp___mathlib_tofloat) refers to d2f.o(x$fpl$d2f) for __aeabi_d2f
+ narrow.o(i.__hardfp___mathlib_tofloat) refers to _rserrno.o(.text) for __set_errno
+ narrow.o(i.__hardfp___mathlib_tofloat) refers to drleqf.o(x$fpl$drleqf) for __aeabi_cdrcmple
+ narrow.o(i.__mathlib_narrow) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ narrow.o(i.__mathlib_narrow) refers to frexp.o(i.frexp) for frexp
+ narrow.o(i.__mathlib_narrow) refers to deqf.o(x$fpl$deqf) for __aeabi_cdcmpeq
+ narrow.o(i.__mathlib_narrow) refers to d2f.o(x$fpl$d2f) for __aeabi_d2f
+ narrow.o(i.__mathlib_narrow) refers to _rserrno.o(.text) for __set_errno
+ narrow.o(i.__mathlib_narrow) refers to drleqf.o(x$fpl$drleqf) for __aeabi_cdrcmple
+ narrow.o(i.__mathlib_tofloat) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ narrow.o(i.__mathlib_tofloat) refers to frexp.o(i.frexp) for frexp
+ narrow.o(i.__mathlib_tofloat) refers to deqf.o(x$fpl$deqf) for __aeabi_cdcmpeq
+ narrow.o(i.__mathlib_tofloat) refers to d2f.o(x$fpl$d2f) for __aeabi_d2f
+ narrow.o(i.__mathlib_tofloat) refers to _rserrno.o(.text) for __set_errno
+ narrow.o(i.__mathlib_tofloat) refers to drleqf.o(x$fpl$drleqf) for __aeabi_cdrcmple
+ narrow.o(i.__softfp___mathlib_tofloat) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ narrow.o(i.__softfp___mathlib_tofloat) refers to frexp.o(i.frexp) for frexp
+ narrow.o(i.__softfp___mathlib_tofloat) refers to deqf.o(x$fpl$deqf) for __aeabi_cdcmpeq
+ narrow.o(i.__softfp___mathlib_tofloat) refers to d2f.o(x$fpl$d2f) for __aeabi_d2f
+ narrow.o(i.__softfp___mathlib_tofloat) refers to _rserrno.o(.text) for __set_errno
+ narrow.o(i.__softfp___mathlib_tofloat) refers to drleqf.o(x$fpl$drleqf) for __aeabi_cdrcmple
+ sys_wrch.o(.text) refers (Special) to use_no_semi.o(.text) for __I$use$semihosting
+ sys_wrch.o(.text) refers (Special) to indicate_semi.o(.text) for __semihosting_library_function
+ _rserrno.o(.text) refers to rt_errno_addr.o(.text) for __aeabi_errno_addr
+ scanf_hexfp.o(.text) refers to _chval.o(.text) for _chval
+ scanf_hexfp.o(.text) refers to llshl.o(.text) for __aeabi_llsl
+ scanf_hexfp.o(.text) refers to ldexp.o(i.__support_ldexp) for __support_ldexp
+ scanf_hexfp.o(.text) refers to narrow.o(i.__mathlib_narrow) for __mathlib_narrow
+ lc_ctype_c.o(locale$$data) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000012) for __rt_lib_init_lc_ctype_2
+ lc_ctype_c.o(locale$$code) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000012) for __rt_lib_init_lc_ctype_2
+ lc_ctype_c.o(locale$$code) refers to strcmpv7m.o(.text) for strcmp
+ lc_ctype_c.o(locale$$code) refers to lc_ctype_c.o(locale$$data) for __lcctype_c_name
+ defsig_abrt_outer.o(.text) refers to defsig_abrt_inner.o(.text) for __rt_SIGABRT_inner
+ defsig_abrt_outer.o(.text) refers to defsig_exit.o(.text) for __sig_exit
+ defsig_abrt_formal.o(.text) refers to rt_raise.o(.text) for __rt_raise
+ defsig.o(CL$$defsig) refers to defsig_abrt_inner.o(.text) for __rt_SIGABRT_inner
+ defsig.o(CL$$defsig) refers to defsig_rtred_inner.o(.text) for __rt_SIGRTRED_inner
+ defsig.o(CL$$defsig) refers to defsig_rtmem_inner.o(.text) for __rt_SIGRTMEM_inner
+ defsig.o(CL$$defsig) refers to defsig_pvfn_inner.o(.text) for __rt_SIGPVFN_inner
+ d2f.o(x$fpl$d2f) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ d2f.o(x$fpl$d2f) refers to fretinf.o(x$fpl$fretinf) for __fpl_fretinf
+ d2f.o(x$fpl$d2f) refers to dnaninf.o(x$fpl$dnaninf) for __fpl_dnaninf
+ deqf.o(x$fpl$deqf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ deqf.o(x$fpl$deqf) refers to dnaninf.o(x$fpl$dnaninf) for __fpl_dnaninf
+ deqf.o(x$fpl$deqf) refers to dcmpi.o(x$fpl$dcmpinf) for __fpl_dcmp_Inf
+ drleqf.o(x$fpl$drleqf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ drleqf.o(x$fpl$drleqf) refers to dleqf.o(x$fpl$dleqf) for __fpl_dcmple_InfNaN
+ frexp.o(i.__hardfp_frexp) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ frexp.o(i.__hardfp_frexp) refers to dmul.o(x$fpl$dmul) for __aeabi_dmul
+ frexp.o(i.__softfp_frexp) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ frexp.o(i.__softfp_frexp) refers to dmul.o(x$fpl$dmul) for __aeabi_dmul
+ frexp.o(i.frexp) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ frexp.o(i.frexp) refers to dmul.o(x$fpl$dmul) for __aeabi_dmul
+ defsig_abrt_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+ defsig_fpe_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+ defsig_stak_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+ defsig_cppl_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+ defsig_segv_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+ defsig_other.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+ dcmpi.o(x$fpl$dcmpinf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ dleqf.o(x$fpl$dleqf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ dleqf.o(x$fpl$dleqf) refers to dnaninf.o(x$fpl$dnaninf) for __fpl_dnaninf
+ dleqf.o(x$fpl$dleqf) refers to dcmpi.o(x$fpl$dcmpinf) for __fpl_dcmp_Inf
+ dmul.o(x$fpl$dmul) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ dmul.o(x$fpl$dmul) refers to dretinf.o(x$fpl$dretinf) for __fpl_dretinf
+ dmul.o(x$fpl$dmul) refers to dnaninf.o(x$fpl$dnaninf) for __fpl_dnaninf
+ dnaninf.o(x$fpl$dnaninf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ fretinf.o(x$fpl$fretinf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ldexp.o(i.__hardfp_ldexp) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ldexp.o(i.__hardfp_ldexp) refers to deqf.o(x$fpl$deqf) for __aeabi_cdcmpeq
+ ldexp.o(i.__hardfp_ldexp) refers to scalbn.o(x$fpl$scalbn) for __ARM_scalbn
+ ldexp.o(i.__hardfp_ldexp) refers to _rserrno.o(.text) for __set_errno
+ ldexp.o(i.__hardfp_ldexp) refers to dunder.o(i.__mathlib_dbl_underflow) for __mathlib_dbl_underflow
+ ldexp.o(i.__hardfp_ldexp) refers to dunder.o(i.__mathlib_dbl_overflow) for __mathlib_dbl_overflow
+ ldexp.o(i.__softfp_ldexp) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ldexp.o(i.__softfp_ldexp) refers to ldexp.o(i.__hardfp_ldexp) for __hardfp_ldexp
+ ldexp.o(i.__support_ldexp) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ldexp.o(i.__support_ldexp) refers to ldexp.o(i.__hardfp_ldexp) for __hardfp_ldexp
+ ldexp.o(i.ldexp) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ldexp.o(i.ldexp) refers to ldexp.o(i.__hardfp_ldexp) for __hardfp_ldexp
+ ldexp_x.o(i.____hardfp_ldexp$lsc) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ldexp_x.o(i.____hardfp_ldexp$lsc) refers to deqf.o(x$fpl$deqf) for __aeabi_cdcmpeq
+ ldexp_x.o(i.____hardfp_ldexp$lsc) refers to scalbn.o(x$fpl$scalbn) for __ARM_scalbn
+ ldexp_x.o(i.____hardfp_ldexp$lsc) refers to _rserrno.o(.text) for __set_errno
+ ldexp_x.o(i.____hardfp_ldexp$lsc) refers to qnan.o(.constdata) for __mathlib_zero
+ ldexp_x.o(i.____softfp_ldexp$lsc) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ldexp_x.o(i.____softfp_ldexp$lsc) refers to ldexp_x.o(i.____hardfp_ldexp$lsc) for ____hardfp_ldexp$lsc
+ ldexp_x.o(i.____support_ldexp$lsc) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ldexp_x.o(i.____support_ldexp$lsc) refers to ldexp_x.o(i.____hardfp_ldexp$lsc) for ____hardfp_ldexp$lsc
+ ldexp_x.o(i.__ldexp$lsc) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ldexp_x.o(i.__ldexp$lsc) refers to ldexp_x.o(i.____hardfp_ldexp$lsc) for ____hardfp_ldexp$lsc
+ dretinf.o(x$fpl$dretinf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ scalbn.o(x$fpl$scalbn) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ scalbn.o(x$fpl$scalbn) refers to dcheck1.o(x$fpl$dcheck1) for __fpl_dcheck_NaN1
+ dunder.o(i.__mathlib_dbl_divzero) refers to ddiv.o(x$fpl$ddiv) for __aeabi_ddiv
+ dunder.o(i.__mathlib_dbl_infnan) refers to daddsub_clz.o(x$fpl$dadd) for __aeabi_dadd
+ dunder.o(i.__mathlib_dbl_infnan2) refers to daddsub_clz.o(x$fpl$dadd) for __aeabi_dadd
+ dunder.o(i.__mathlib_dbl_invalid) refers to ddiv.o(x$fpl$ddiv) for __aeabi_ddiv
+ dunder.o(i.__mathlib_dbl_overflow) refers to dmul.o(x$fpl$dmul) for __aeabi_dmul
+ dunder.o(i.__mathlib_dbl_posinfnan) refers to dmul.o(x$fpl$dmul) for __aeabi_dmul
+ dunder.o(i.__mathlib_dbl_underflow) refers to dmul.o(x$fpl$dmul) for __aeabi_dmul
+ qnan.o(.constdata) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ daddsub_clz.o(x$fpl$dadd) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ daddsub_clz.o(x$fpl$dadd) refers to daddsub_clz.o(x$fpl$dsub) for _dsub1
+ daddsub_clz.o(x$fpl$dadd) refers to dretinf.o(x$fpl$dretinf) for __fpl_dretinf
+ daddsub_clz.o(x$fpl$dadd) refers to dnaninf.o(x$fpl$dnaninf) for __fpl_dnaninf
+ daddsub_clz.o(x$fpl$drsb) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ daddsub_clz.o(x$fpl$drsb) refers to daddsub_clz.o(x$fpl$dadd) for _dadd1
+ daddsub_clz.o(x$fpl$drsb) refers to daddsub_clz.o(x$fpl$dsub) for _dsub1
+ daddsub_clz.o(x$fpl$dsub) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ daddsub_clz.o(x$fpl$dsub) refers to daddsub_clz.o(x$fpl$dadd) for _dadd1
+ daddsub_clz.o(x$fpl$dsub) refers to dnaninf.o(x$fpl$dnaninf) for __fpl_dnaninf
+ dcheck1.o(x$fpl$dcheck1) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ dcheck1.o(x$fpl$dcheck1) refers to retnan.o(x$fpl$retnan) for __fpl_return_NaN
+ ddiv.o(x$fpl$drdiv) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ddiv.o(x$fpl$drdiv) refers to ddiv.o(x$fpl$ddiv) for ddiv_entry
+ ddiv.o(x$fpl$ddiv) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ ddiv.o(x$fpl$ddiv) refers to dretinf.o(x$fpl$dretinf) for __fpl_dretinf
+ ddiv.o(x$fpl$ddiv) refers to dnaninf.o(x$fpl$dnaninf) for __fpl_dnaninf
+ retnan.o(x$fpl$retnan) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ retnan.o(x$fpl$retnan) refers to trapv.o(x$fpl$trapveneer) for __fpl_cmpreturn
+ trapv.o(x$fpl$trapveneer) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp
+ i2c_api.o(i.i2c_start) refers to i2c_api.o(.bss) for .bss
+ busin.o(.constdata__ZTVN4mbed5BusInE) refers to busin.o(.constdata__ZTIN4mbed5BusInE) for typeinfo for mbed::BusIn
+ busin.o(.constdata__ZTVN4mbed5BusInE) refers to busin.o(i._ZN4mbed5BusInD1Ev) for mbed::BusIn::~BusIn()
+ busin.o(.constdata__ZTVN4mbed5BusInE) refers to busin.o(i._ZN4mbed5BusInD0Ev) for mbed::BusIn::~BusIn__deallocating()
+ busin.o(.constdata__ZTVN4mbed5BusInE) refers to busin.o(i._ZN4mbed5BusIn4lockEv) for mbed::BusIn::lock()
+ busin.o(.constdata__ZTVN4mbed5BusInE) refers to busin.o(i._ZN4mbed5BusIn6unlockEv) for mbed::BusIn::unlock()
+ busin.o(.constdata__ZTIN4mbed5BusInE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ busin.o(.constdata__ZTIN4mbed5BusInE) refers to busin.o(.constdata__ZTSN4mbed5BusInE) for typeinfo name for mbed::BusIn
+ businout.o(.constdata__ZTVN4mbed8BusInOutE) refers to businout.o(.constdata__ZTIN4mbed8BusInOutE) for typeinfo for mbed::BusInOut
+ businout.o(.constdata__ZTVN4mbed8BusInOutE) refers to businout.o(i._ZN4mbed8BusInOutD1Ev) for mbed::BusInOut::~BusInOut()
+ businout.o(.constdata__ZTVN4mbed8BusInOutE) refers to businout.o(i._ZN4mbed8BusInOutD0Ev) for mbed::BusInOut::~BusInOut__deallocating()
+ businout.o(.constdata__ZTVN4mbed8BusInOutE) refers to businout.o(i._ZN4mbed8BusInOut4lockEv) for mbed::BusInOut::lock()
+ businout.o(.constdata__ZTVN4mbed8BusInOutE) refers to businout.o(i._ZN4mbed8BusInOut6unlockEv) for mbed::BusInOut::unlock()
+ businout.o(.constdata__ZTIN4mbed8BusInOutE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ businout.o(.constdata__ZTIN4mbed8BusInOutE) refers to businout.o(.constdata__ZTSN4mbed8BusInOutE) for typeinfo name for mbed::BusInOut
+ busout.o(.constdata__ZTVN4mbed6BusOutE) refers to busout.o(.constdata__ZTIN4mbed6BusOutE) for typeinfo for mbed::BusOut
+ busout.o(.constdata__ZTVN4mbed6BusOutE) refers to busout.o(i._ZN4mbed6BusOutD1Ev) for mbed::BusOut::~BusOut()
+ busout.o(.constdata__ZTVN4mbed6BusOutE) refers to busout.o(i._ZN4mbed6BusOutD0Ev) for mbed::BusOut::~BusOut__deallocating()
+ busout.o(.constdata__ZTVN4mbed6BusOutE) refers to busout.o(i._ZN4mbed6BusOut4lockEv) for mbed::BusOut::lock()
+ busout.o(.constdata__ZTVN4mbed6BusOutE) refers to busout.o(i._ZN4mbed6BusOut6unlockEv) for mbed::BusOut::unlock()
+ busout.o(.constdata__ZTIN4mbed6BusOutE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ busout.o(.constdata__ZTIN4mbed6BusOutE) refers to busout.o(.constdata__ZTSN4mbed6BusOutE) for typeinfo name for mbed::BusOut
+ callchain.o(.constdata__ZTVN4mbed9CallChainE) refers to callchain.o(.constdata__ZTIN4mbed9CallChainE) for typeinfo for mbed::CallChain
+ callchain.o(.constdata__ZTVN4mbed9CallChainE) refers to callchain.o(i._ZN4mbed9CallChainD1Ev) for mbed::CallChain::~CallChain()
+ callchain.o(.constdata__ZTVN4mbed9CallChainE) refers to callchain.o(i._ZN4mbed9CallChainD0Ev) for mbed::CallChain::~CallChain__deallocating()
+ callchain.o(.constdata__ZTIN4mbed9CallChainE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ callchain.o(.constdata__ZTIN4mbed9CallChainE) refers to callchain.o(.constdata__ZTSN4mbed9CallChainE) for typeinfo name for mbed::CallChain
+ filebase.o(.constdata__ZTVN4mbed8FileBaseE) refers to filebase.o(.constdata__ZTIN4mbed8FileBaseE) for typeinfo for mbed::FileBase
+ filebase.o(.constdata__ZTVN4mbed8FileBaseE) refers to filebase.o(i._ZN4mbed8FileBaseD1Ev) for mbed::FileBase::~FileBase()
+ filebase.o(.constdata__ZTVN4mbed8FileBaseE) refers to filebase.o(i._ZN4mbed8FileBaseD0Ev) for mbed::FileBase::~FileBase__deallocating()
+ filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv) refers to mbed_assert.o(i.mbed_assert_internal) for mbed_assert_internal
+ filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0) for SingletonPtr<PlatformMutex>::get()::string (instance 2)
+ filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv) refers to filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs) for SingletonPtr<PlatformMutex>::get()::string
+ filebase.o(.ARM.exidx) refers to filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv) for t._ZN12SingletonPtrI13PlatformMutexEptEv
+ filebase.o(.constdata__ZTIN4mbed8FileBaseE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ filebase.o(.constdata__ZTIN4mbed8FileBaseE) refers to filebase.o(.constdata__ZTSN4mbed8FileBaseE) for typeinfo name for mbed::FileBase
+ filelike.o(.constdata__ZTVN4mbed8FileLikeE) refers to filelike.o(.constdata__ZTIN4mbed8FileLikeE) for typeinfo for mbed::FileLike
+ filelike.o(.constdata__ZTVN4mbed8FileLikeE) refers to pure_virt.o(i.__cxa_pure_virtual) for __cxa_pure_virtual
+ filelike.o(.constdata__ZTVN4mbed8FileLikeE) refers to filelike.o(i._ZN4mbed10FileHandle4flenEv) for mbed::FileHandle::flen()
+ filelike.o(.constdata__ZTVN4mbed8FileLikeE) refers to filelike.o(i._ZN4mbed8FileLikeD2Ev) for mbed::FileLike::~FileLike__sub_object()
+ filelike.o(.constdata__ZTVN4mbed8FileLikeE) refers to filelike.o(i._ZN4mbed8FileLikeD0Ev) for mbed::FileLike::~FileLike__deallocating()
+ filelike.o(.constdata__ZTVN4mbed8FileLikeE) refers to filelike.o(i._ZN4mbed10FileHandle4lockEv) for mbed::FileHandle::lock()
+ filelike.o(.constdata__ZTVN4mbed8FileLikeE) refers to filelike.o(i._ZN4mbed10FileHandle6unlockEv) for mbed::FileHandle::unlock()
+ filelike.o(.constdata__ZTVN4mbed8FileLikeE) refers to filelike.o(i._ZThn4_N4mbed8FileLikeD1Ev) for thunk{-4} to mbed::FileLike::~FileLike()
+ filelike.o(.constdata__ZTVN4mbed8FileLikeE) refers to filelike.o(i._ZThn4_N4mbed8FileLikeD0Ev) for thunk{-4} to mbed::FileLike::~FileLike__deallocating()
+ filelike.o(.ARM.exidx) refers to filelike.o(i._ZN4mbed10FileHandle4flenEv) for i._ZN4mbed10FileHandle4flenEv
+ filelike.o(.ARM.exidx) refers to filelike.o(i._ZN4mbed10FileHandle4lockEv) for i._ZN4mbed10FileHandle4lockEv
+ filelike.o(.ARM.exidx) refers to filelike.o(i._ZN4mbed10FileHandle6unlockEv) for i._ZN4mbed10FileHandle6unlockEv
+ filelike.o(.constdata__ZTIN4mbed8FileLikeE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv121__vmi_class_type_infoE) for vtable for __cxxabiv1::__vmi_class_type_info
+ filelike.o(.constdata__ZTIN4mbed8FileLikeE) refers to filelike.o(.constdata__ZTSN4mbed8FileLikeE) for typeinfo name for mbed::FileLike
+ filelike.o(.constdata__ZTIN4mbed8FileLikeE) refers to retarget.o(.constdata__ZTIN4mbed10FileHandleE) for typeinfo for mbed::FileHandle
+ filelike.o(.constdata__ZTIN4mbed8FileLikeE) refers to filebase.o(.constdata__ZTIN4mbed8FileBaseE) for typeinfo for mbed::FileBase
+ filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE) refers to filesystemlike.o(.constdata__ZTIN4mbed14FileSystemLikeE) for typeinfo for mbed::FileSystemLike
+ filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE) refers to filesystemlike.o(i._ZN4mbed14FileSystemLikeD2Ev) for mbed::FileSystemLike::~FileSystemLike__sub_object()
+ filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE) refers to filesystemlike.o(i._ZN4mbed14FileSystemLikeD0Ev) for mbed::FileSystemLike::~FileSystemLike__deallocating()
+ filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE) refers to pure_virt.o(i.__cxa_pure_virtual) for __cxa_pure_virtual
+ filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike6removeEPKc) for mbed::FileSystemLike::remove(const char*)
+ filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike6renameEPKcS2_) for mbed::FileSystemLike::rename(const char*, const char*)
+ filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike7opendirEPKc) for mbed::FileSystemLike::opendir(const char*)
+ filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike5mkdirEPKci) for mbed::FileSystemLike::mkdir(const char*, int)
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike6removeEPKc) for i._ZN4mbed14FileSystemLike6removeEPKc
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike6renameEPKcS2_) for i._ZN4mbed14FileSystemLike6renameEPKcS2_
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike7opendirEPKc) for i._ZN4mbed14FileSystemLike7opendirEPKc
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed14FileSystemLike5mkdirEPKci) for i._ZN4mbed14FileSystemLike5mkdirEPKci
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(.constdata__ZTIN4mbed13BaseDirHandleE) for typeinfo for mbed::BaseDirHandle
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle8closedirEv) for mbed::BaseDirHandle::closedir()
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle7readdirEv) for mbed::BaseDirHandle::readdir()
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle9rewinddirEv) for mbed::BaseDirHandle::rewinddir()
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle7telldirEv) for mbed::BaseDirHandle::telldir()
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle7seekdirEl) for mbed::BaseDirHandle::seekdir(long)
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandleD1Ev) for mbed::BaseDirHandle::~BaseDirHandle()
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandleD0Ev) for mbed::BaseDirHandle::~BaseDirHandle__deallocating()
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle4lockEv) for mbed::BaseDirHandle::lock()
+ filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle6unlockEv) for mbed::BaseDirHandle::unlock()
+ filesystemlike.o(.constdata__ZTIN4mbed14FileSystemLikeE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ filesystemlike.o(.constdata__ZTIN4mbed14FileSystemLikeE) refers to filesystemlike.o(.constdata__ZTSN4mbed14FileSystemLikeE) for typeinfo name for mbed::FileSystemLike
+ filesystemlike.o(.constdata__ZTIN4mbed14FileSystemLikeE) refers to filebase.o(.constdata__ZTIN4mbed8FileBaseE) for typeinfo for mbed::FileBase
+ filesystemlike.o(.constdata__ZTIN4mbed13BaseDirHandleE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ filesystemlike.o(.constdata__ZTIN4mbed13BaseDirHandleE) refers to filesystemlike.o(.constdata__ZTSN4mbed13BaseDirHandleE) for typeinfo name for mbed::BaseDirHandle
+ filesystemlike.o(.constdata__ZTIN4mbed13BaseDirHandleE) refers to filesystemlike.o(.constdata__ZTIN4mbed9DirHandleE) for typeinfo for mbed::DirHandle
+ filesystemlike.o(.constdata__ZTIN4mbed9DirHandleE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ filesystemlike.o(.constdata__ZTIN4mbed9DirHandleE) refers to filesystemlike.o(.constdata__ZTSN4mbed9DirHandleE) for typeinfo name for mbed::DirHandle
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle8closedirEv) for i._ZN4mbed13BaseDirHandle8closedirEv
+ filesystemlike.o(i._ZN4mbed13BaseDirHandle7readdirEv) refers to filebase.o(i._ZN4mbed8FileBase3getEi) for mbed::FileBase::get(int)
+ filesystemlike.o(i._ZN4mbed13BaseDirHandle7readdirEv) refers to filebase.o(i._ZN4mbed8FileBase7getNameEv) for mbed::FileBase::getName()
+ filesystemlike.o(i._ZN4mbed13BaseDirHandle7readdirEv) refers to strncpy.o(.text) for strncpy
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle7readdirEv) for i._ZN4mbed13BaseDirHandle7readdirEv
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle7telldirEv) for i._ZN4mbed13BaseDirHandle7telldirEv
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle7seekdirEl) for i._ZN4mbed13BaseDirHandle7seekdirEl
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle9rewinddirEv) for i._ZN4mbed13BaseDirHandle9rewinddirEv
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle4lockEv) for i._ZN4mbed13BaseDirHandle4lockEv
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandle6unlockEv) for i._ZN4mbed13BaseDirHandle6unlockEv
+ filesystemlike.o(i._ZN4mbed13BaseDirHandleD1Ev) refers to filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) for vtable for mbed::BaseDirHandle
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandleD1Ev) for i._ZN4mbed13BaseDirHandleD1Ev
+ filesystemlike.o(i._ZN4mbed13BaseDirHandleD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ filesystemlike.o(i._ZN4mbed13BaseDirHandleD0Ev) refers to filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE) for vtable for mbed::BaseDirHandle
+ filesystemlike.o(.ARM.exidx) refers to filesystemlike.o(i._ZN4mbed13BaseDirHandleD0Ev) for i._ZN4mbed13BaseDirHandleD0Ev
+ i2c.o(.constdata__ZTVN4mbed3I2CE) refers to i2c.o(.constdata__ZTIN4mbed3I2CE) for typeinfo for mbed::I2C
+ i2c.o(.constdata__ZTVN4mbed3I2CE) refers to i2c.o(i._ZN4mbed3I2C4lockEv) for mbed::I2C::lock()
+ i2c.o(.constdata__ZTVN4mbed3I2CE) refers to i2c.o(i._ZN4mbed3I2C6unlockEv) for mbed::I2C::unlock()
+ i2c.o(.constdata__ZTVN4mbed3I2CE) refers to i2c.o(i._ZN4mbed3I2CD1Ev) for mbed::I2C::~I2C()
+ i2c.o(.constdata__ZTVN4mbed3I2CE) refers to i2c.o(i._ZN4mbed3I2CD0Ev) for mbed::I2C::~I2C__deallocating()
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2CD1Ev) for i._ZN4mbed3I2CD1Ev
+ i2c.o(i._ZN4mbed3I2CD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ i2c.o(.ARM.exidx) refers to i2c.o(i._ZN4mbed3I2CD0Ev) for i._ZN4mbed3I2CD0Ev
+ i2c.o(.constdata__ZTIN4mbed3I2CE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ i2c.o(.constdata__ZTIN4mbed3I2CE) refers to i2c.o(.constdata__ZTSN4mbed3I2CE) for typeinfo name for mbed::I2C
+ interruptin.o(.constdata__ZTVN4mbed11InterruptInE) refers to interruptin.o(.constdata__ZTIN4mbed11InterruptInE) for typeinfo for mbed::InterruptIn
+ interruptin.o(.constdata__ZTVN4mbed11InterruptInE) refers to interruptin.o(i._ZN4mbed11InterruptInD1Ev) for mbed::InterruptIn::~InterruptIn()
+ interruptin.o(.constdata__ZTVN4mbed11InterruptInE) refers to interruptin.o(i._ZN4mbed11InterruptInD0Ev) for mbed::InterruptIn::~InterruptIn__deallocating()
+ interruptin.o(.constdata__ZTIN4mbed11InterruptInE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ interruptin.o(.constdata__ZTIN4mbed11InterruptInE) refers to interruptin.o(.constdata__ZTSN4mbed11InterruptInE) for typeinfo name for mbed::InterruptIn
+ interruptmanager.o(.ARM.exidx) refers to interruptmanager.o(t._ZN4mbed8CallbackIFvvEE12_staticthunkEPvS3_) for t._ZN4mbed8CallbackIFvvEE12_staticthunkEPvS3_
+ rawserial.o(.constdata__ZTVN4mbed9RawSerialE) refers to rawserial.o(.constdata__ZTIN4mbed9RawSerialE) for typeinfo for mbed::RawSerial
+ rawserial.o(.constdata__ZTVN4mbed9RawSerialE) refers to rawserial.o(i._ZN4mbed9RawSerial4lockEv) for mbed::RawSerial::lock()
+ rawserial.o(.constdata__ZTVN4mbed9RawSerialE) refers to rawserial.o(i._ZN4mbed9RawSerial6unlockEv) for mbed::RawSerial::unlock()
+ rawserial.o(.constdata__ZTVN4mbed9RawSerialE) refers to rawserial.o(i._ZN4mbed9RawSerialD1Ev) for mbed::RawSerial::~RawSerial()
+ rawserial.o(.constdata__ZTVN4mbed9RawSerialE) refers to rawserial.o(i._ZN4mbed9RawSerialD0Ev) for mbed::RawSerial::~RawSerial__deallocating()
+ rawserial.o(i._ZN4mbed9RawSerialD1Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ rawserial.o(.ARM.exidx) refers to rawserial.o(i._ZN4mbed9RawSerialD1Ev) for i._ZN4mbed9RawSerialD1Ev
+ rawserial.o(i._ZN4mbed9RawSerialD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ rawserial.o(i._ZN4mbed9RawSerialD0Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ rawserial.o(.ARM.exidx) refers to rawserial.o(i._ZN4mbed9RawSerialD0Ev) for i._ZN4mbed9RawSerialD0Ev
+ rawserial.o(.constdata__ZTIN4mbed9RawSerialE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ rawserial.o(.constdata__ZTIN4mbed9RawSerialE) refers to rawserial.o(.constdata__ZTSN4mbed9RawSerialE) for typeinfo name for mbed::RawSerial
+ rawserial.o(.constdata__ZTIN4mbed9RawSerialE) refers to serialbase.o(.constdata__ZTIN4mbed10SerialBaseE) for typeinfo for mbed::SerialBase
+ retarget.o(.constdata__ZTVN4mbed10FileHandleE) refers to retarget.o(.constdata__ZTIN4mbed10FileHandleE) for typeinfo for mbed::FileHandle
+ retarget.o(.constdata__ZTVN4mbed10FileHandleE) refers to pure_virt.o(i.__cxa_pure_virtual) for __cxa_pure_virtual
+ retarget.o(.constdata__ZTVN4mbed10FileHandleE) refers to filelike.o(i._ZN4mbed10FileHandle4flenEv) for mbed::FileHandle::flen()
+ retarget.o(.constdata__ZTVN4mbed10FileHandleE) refers to retarget.o(i._ZN4mbed10FileHandleD2Ev) for mbed::FileHandle::~FileHandle__sub_object()
+ retarget.o(.constdata__ZTVN4mbed10FileHandleE) refers to retarget.o(i._ZN4mbed10FileHandleD0Ev) for mbed::FileHandle::~FileHandle__deallocating()
+ retarget.o(.constdata__ZTVN4mbed10FileHandleE) refers to filelike.o(i._ZN4mbed10FileHandle4lockEv) for mbed::FileHandle::lock()
+ retarget.o(.constdata__ZTVN4mbed10FileHandleE) refers to filelike.o(i._ZN4mbed10FileHandle6unlockEv) for mbed::FileHandle::unlock()
+ retarget.o(.constdata__ZTIN4mbed10FileHandleE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ retarget.o(.constdata__ZTIN4mbed10FileHandleE) refers to retarget.o(.constdata__ZTSN4mbed10FileHandleE) for typeinfo name for mbed::FileHandle
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(.constdata__ZTIN4mbed6SerialE) for typeinfo for mbed::Serial
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZN4mbed6Serial4lockEv) for mbed::Serial::lock()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZN4mbed6Serial6unlockEv) for mbed::Serial::unlock()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZN4mbed6SerialD1Ev) for mbed::Serial::~Serial()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZN4mbed6SerialD0Ev) for mbed::Serial::~Serial__deallocating()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZN4mbed6Serial5_getcEv) for mbed::Serial::_getc()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZN4mbed6Serial5_putcEi) for mbed::Serial::_putc(int)
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to stream.o(i._ZN4mbed6Stream5writeEPKvj) for mbed::Stream::write(const void*, unsigned)
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to stream.o(i._ZN4mbed6Stream5closeEv) for mbed::Stream::close()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to stream.o(i._ZN4mbed6Stream4readEPvj) for mbed::Stream::read(void*, unsigned)
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to stream.o(i._ZN4mbed6Stream6isattyEv) for mbed::Stream::isatty()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to stream.o(i._ZN4mbed6Stream5lseekEli) for mbed::Stream::lseek(long, int)
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to stream.o(i._ZN4mbed6Stream5fsyncEv) for mbed::Stream::fsync()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to stream.o(i._ZN4mbed6Stream4flenEv) for mbed::Stream::flen()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZThn184_N4mbed6SerialD1Ev) for thunk{-184} to mbed::Serial::~Serial()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZThn184_N4mbed6SerialD0Ev) for thunk{-184} to mbed::Serial::~Serial__deallocating()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZThn184_N4mbed6Serial4lockEv) for thunk{-184} to mbed::Serial::lock()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZThn184_N4mbed6Serial6unlockEv) for thunk{-184} to mbed::Serial::unlock()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZThn184_N4mbed6Serial5_putcEi) for thunk{-184} to mbed::Serial::_putc(int)
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZThn184_N4mbed6Serial5_getcEv) for thunk{-184} to mbed::Serial::_getc()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZThn188_N4mbed6SerialD1Ev) for thunk{-188} to mbed::Serial::~Serial()
+ serial.o(.constdata__ZTVN4mbed6SerialE) refers to serial.o(i._ZThn188_N4mbed6SerialD0Ev) for thunk{-188} to mbed::Serial::~Serial__deallocating()
+ serial.o(i._ZN4mbed6SerialD1Ev) refers to stream.o(i._ZN4mbed6StreamD2Ev) for mbed::Stream::~Stream__sub_object()
+ serial.o(i._ZN4mbed6SerialD1Ev) refers to serial.o(.constdata__ZTVN4mbed6SerialE) for vtable for mbed::Serial
+ serial.o(i._ZN4mbed6SerialD1Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ serial.o(.ARM.exidx) refers to serial.o(i._ZN4mbed6SerialD1Ev) for i._ZN4mbed6SerialD1Ev
+ serial.o(i._ZN4mbed6SerialD0Ev) refers to stream.o(i._ZN4mbed6StreamD2Ev) for mbed::Stream::~Stream__sub_object()
+ serial.o(i._ZN4mbed6SerialD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ serial.o(i._ZN4mbed6SerialD0Ev) refers to serial.o(.constdata__ZTVN4mbed6SerialE) for vtable for mbed::Serial
+ serial.o(i._ZN4mbed6SerialD0Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ serial.o(.ARM.exidx) refers to serial.o(i._ZN4mbed6SerialD0Ev) for i._ZN4mbed6SerialD0Ev
+ serial.o(i._ZThn188_N4mbed6SerialD0Ev) refers to stream.o(i._ZN4mbed6StreamD2Ev) for mbed::Stream::~Stream__sub_object()
+ serial.o(i._ZThn188_N4mbed6SerialD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ serial.o(i._ZThn188_N4mbed6SerialD0Ev) refers to serial.o(.constdata__ZTVN4mbed6SerialE) for vtable for mbed::Serial
+ serial.o(i._ZThn188_N4mbed6SerialD0Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ serial.o(.ARM.exidx) refers to serial.o(i._ZThn188_N4mbed6SerialD0Ev) for i._ZThn188_N4mbed6SerialD0Ev
+ serial.o(i._ZThn184_N4mbed6SerialD0Ev) refers to stream.o(i._ZN4mbed6StreamD2Ev) for mbed::Stream::~Stream__sub_object()
+ serial.o(i._ZThn184_N4mbed6SerialD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ serial.o(i._ZThn184_N4mbed6SerialD0Ev) refers to serial.o(.constdata__ZTVN4mbed6SerialE) for vtable for mbed::Serial
+ serial.o(i._ZThn184_N4mbed6SerialD0Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ serial.o(.ARM.exidx) refers to serial.o(i._ZThn184_N4mbed6SerialD0Ev) for i._ZThn184_N4mbed6SerialD0Ev
+ serial.o(i._ZThn188_N4mbed6SerialD1Ev) refers to stream.o(i._ZN4mbed6StreamD2Ev) for mbed::Stream::~Stream__sub_object()
+ serial.o(i._ZThn188_N4mbed6SerialD1Ev) refers to serial.o(.constdata__ZTVN4mbed6SerialE) for vtable for mbed::Serial
+ serial.o(i._ZThn188_N4mbed6SerialD1Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ serial.o(.ARM.exidx) refers to serial.o(i._ZThn188_N4mbed6SerialD1Ev) for i._ZThn188_N4mbed6SerialD1Ev
+ serial.o(i._ZThn184_N4mbed6SerialD1Ev) refers to stream.o(i._ZN4mbed6StreamD2Ev) for mbed::Stream::~Stream__sub_object()
+ serial.o(i._ZThn184_N4mbed6SerialD1Ev) refers to serial.o(.constdata__ZTVN4mbed6SerialE) for vtable for mbed::Serial
+ serial.o(i._ZThn184_N4mbed6SerialD1Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ serial.o(.ARM.exidx) refers to serial.o(i._ZThn184_N4mbed6SerialD1Ev) for i._ZThn184_N4mbed6SerialD1Ev
+ serial.o(.constdata__ZTIN4mbed6SerialE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv121__vmi_class_type_infoE) for vtable for __cxxabiv1::__vmi_class_type_info
+ serial.o(.constdata__ZTIN4mbed6SerialE) refers to serial.o(.constdata__ZTSN4mbed6SerialE) for typeinfo name for mbed::Serial
+ serial.o(.constdata__ZTIN4mbed6SerialE) refers to serialbase.o(.constdata__ZTIN4mbed10SerialBaseE) for typeinfo for mbed::SerialBase
+ serial.o(.constdata__ZTIN4mbed6SerialE) refers to stream.o(.constdata__ZTIN4mbed6StreamE) for typeinfo for mbed::Stream
+ serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) refers to serialbase.o(.constdata__ZTIN4mbed10SerialBaseE) for typeinfo for mbed::SerialBase
+ serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) refers to serialbase.o(i._ZN4mbed10SerialBase4lockEv) for mbed::SerialBase::lock()
+ serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) refers to serialbase.o(i._ZN4mbed10SerialBase6unlockEv) for mbed::SerialBase::unlock()
+ serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) refers to serialbase.o(i._ZN4mbed10SerialBaseD1Ev) for mbed::SerialBase::~SerialBase()
+ serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) refers to serialbase.o(i._ZN4mbed10SerialBaseD0Ev) for mbed::SerialBase::~SerialBase__deallocating()
+ serialbase.o(i._ZN4mbed10SerialBaseD1Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBaseD1Ev) for i._ZN4mbed10SerialBaseD1Ev
+ serialbase.o(.ARM.exidx) refers to serialbase.o(t._ZN6CThunkIN4mbed10SerialBaseEE10trampolineEPS1_PvPMS1_FvS4_E) for t._ZN6CThunkIN4mbed10SerialBaseEE10trampolineEPS1_PvPMS1_FvS4_E
+ serialbase.o(i._ZN4mbed10SerialBaseD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ serialbase.o(i._ZN4mbed10SerialBaseD0Ev) refers to serialbase.o(.constdata__ZTVN4mbed10SerialBaseE) for vtable for mbed::SerialBase
+ serialbase.o(.ARM.exidx) refers to serialbase.o(i._ZN4mbed10SerialBaseD0Ev) for i._ZN4mbed10SerialBaseD0Ev
+ serialbase.o(.constdata__ZTIN4mbed10SerialBaseE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ serialbase.o(.constdata__ZTIN4mbed10SerialBaseE) refers to serialbase.o(.constdata__ZTSN4mbed10SerialBaseE) for typeinfo name for mbed::SerialBase
+ spi.o(.constdata__ZTVN4mbed3SPIE) refers to spi.o(.constdata__ZTIN4mbed3SPIE) for typeinfo for mbed::SPI
+ spi.o(.constdata__ZTVN4mbed3SPIE) refers to spi.o(i._ZN4mbed3SPI5writeEi) for mbed::SPI::write(int)
+ spi.o(.constdata__ZTVN4mbed3SPIE) refers to spi.o(i._ZN4mbed3SPI4lockEv) for mbed::SPI::lock()
+ spi.o(.constdata__ZTVN4mbed3SPIE) refers to spi.o(i._ZN4mbed3SPI6unlockEv) for mbed::SPI::unlock()
+ spi.o(.constdata__ZTVN4mbed3SPIE) refers to spi.o(i._ZN4mbed3SPID1Ev) for mbed::SPI::~SPI()
+ spi.o(.constdata__ZTVN4mbed3SPIE) refers to spi.o(i._ZN4mbed3SPID0Ev) for mbed::SPI::~SPI__deallocating()
+ spi.o(.ARM.exidx) refers to spi.o(i._ZN4mbed3SPID1Ev) for i._ZN4mbed3SPID1Ev
+ spi.o(i._ZN4mbed3SPID0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ spi.o(.ARM.exidx) refers to spi.o(i._ZN4mbed3SPID0Ev) for i._ZN4mbed3SPID0Ev
+ spi.o(.constdata__ZTIN4mbed3SPIE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ spi.o(.constdata__ZTIN4mbed3SPIE) refers to spi.o(.constdata__ZTSN4mbed3SPIE) for typeinfo name for mbed::SPI
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(.constdata__ZTIN4mbed6StreamE) for typeinfo for mbed::Stream
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZN4mbed6Stream5writeEPKvj) for mbed::Stream::write(const void*, unsigned)
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZN4mbed6Stream5closeEv) for mbed::Stream::close()
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZN4mbed6Stream4readEPvj) for mbed::Stream::read(void*, unsigned)
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZN4mbed6Stream6isattyEv) for mbed::Stream::isatty()
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZN4mbed6Stream5lseekEli) for mbed::Stream::lseek(long, int)
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZN4mbed6Stream5fsyncEv) for mbed::Stream::fsync()
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZN4mbed6Stream4flenEv) for mbed::Stream::flen()
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZN4mbed6StreamD2Ev) for mbed::Stream::~Stream__sub_object()
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZN4mbed6StreamD0Ev) for mbed::Stream::~Stream__deallocating()
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to filelike.o(i._ZN4mbed10FileHandle4lockEv) for mbed::FileHandle::lock()
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to filelike.o(i._ZN4mbed10FileHandle6unlockEv) for mbed::FileHandle::unlock()
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to pure_virt.o(i.__cxa_pure_virtual) for __cxa_pure_virtual
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZThn4_N4mbed6StreamD1Ev) for thunk{-4} to mbed::Stream::~Stream()
+ stream.o(.constdata__ZTVN4mbed6StreamE) refers to stream.o(i._ZThn4_N4mbed6StreamD0Ev) for thunk{-4} to mbed::Stream::~Stream__deallocating()
+ stream.o(.constdata__ZTIN4mbed6StreamE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ stream.o(.constdata__ZTIN4mbed6StreamE) refers to stream.o(.constdata__ZTSN4mbed6StreamE) for typeinfo name for mbed::Stream
+ stream.o(.constdata__ZTIN4mbed6StreamE) refers to filelike.o(.constdata__ZTIN4mbed8FileLikeE) for typeinfo for mbed::FileLike
+ ticker.o(.constdata__ZTVN4mbed6TickerE) refers to ticker.o(.constdata__ZTIN4mbed6TickerE) for typeinfo for mbed::Ticker
+ ticker.o(.constdata__ZTVN4mbed6TickerE) refers to ticker.o(i._ZN4mbed6TickerD1Ev) for mbed::Ticker::~Ticker()
+ ticker.o(.constdata__ZTVN4mbed6TickerE) refers to ticker.o(i._ZN4mbed6TickerD0Ev) for mbed::Ticker::~Ticker__deallocating()
+ ticker.o(.constdata__ZTVN4mbed6TickerE) refers to ticker.o(i._ZN4mbed6Ticker7handlerEv) for mbed::Ticker::handler()
+ ticker.o(i._ZN4mbed6TickerD1Ev) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ ticker.o(i._ZN4mbed6TickerD1Ev) refers to timerevent.o(i._ZN4mbed10TimerEvent6removeEv) for mbed::TimerEvent::remove()
+ ticker.o(i._ZN4mbed6TickerD1Ev) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ ticker.o(i._ZN4mbed6TickerD1Ev) refers to timerevent.o(i._ZN4mbed10TimerEventD2Ev) for mbed::TimerEvent::~TimerEvent__sub_object()
+ ticker.o(i._ZN4mbed6TickerD1Ev) refers to ticker.o(.constdata__ZTVN4mbed6TickerE) for vtable for mbed::Ticker
+ ticker.o(.ARM.exidx) refers to ticker.o(i._ZN4mbed6TickerD1Ev) for i._ZN4mbed6TickerD1Ev
+ ticker.o(i._ZN4mbed6TickerD0Ev) refers to mbed_critical.o(i.core_util_critical_section_enter) for core_util_critical_section_enter
+ ticker.o(i._ZN4mbed6TickerD0Ev) refers to timerevent.o(i._ZN4mbed10TimerEvent6removeEv) for mbed::TimerEvent::remove()
+ ticker.o(i._ZN4mbed6TickerD0Ev) refers to mbed_critical.o(i.core_util_critical_section_exit) for core_util_critical_section_exit
+ ticker.o(i._ZN4mbed6TickerD0Ev) refers to timerevent.o(i._ZN4mbed10TimerEventD2Ev) for mbed::TimerEvent::~TimerEvent__sub_object()
+ ticker.o(i._ZN4mbed6TickerD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ ticker.o(i._ZN4mbed6TickerD0Ev) refers to ticker.o(.constdata__ZTVN4mbed6TickerE) for vtable for mbed::Ticker
+ ticker.o(.ARM.exidx) refers to ticker.o(i._ZN4mbed6TickerD0Ev) for i._ZN4mbed6TickerD0Ev
+ ticker.o(.constdata__ZTIN4mbed6TickerE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ ticker.o(.constdata__ZTIN4mbed6TickerE) refers to ticker.o(.constdata__ZTSN4mbed6TickerE) for typeinfo name for mbed::Ticker
+ ticker.o(.constdata__ZTIN4mbed6TickerE) refers to timerevent.o(.constdata__ZTIN4mbed10TimerEventE) for typeinfo for mbed::TimerEvent
+ timeout.o(.constdata__ZTVN4mbed7TimeoutE) refers to timeout.o(.constdata__ZTIN4mbed7TimeoutE) for typeinfo for mbed::Timeout
+ timeout.o(.constdata__ZTVN4mbed7TimeoutE) refers to timeout.o(i._ZN4mbed7TimeoutD1Ev) for mbed::Timeout::~Timeout()
+ timeout.o(.constdata__ZTVN4mbed7TimeoutE) refers to timeout.o(i._ZN4mbed7TimeoutD0Ev) for mbed::Timeout::~Timeout__deallocating()
+ timeout.o(.constdata__ZTVN4mbed7TimeoutE) refers to timeout.o(i._ZN4mbed7Timeout7handlerEv) for mbed::Timeout::handler()
+ timeout.o(i._ZN4mbed7TimeoutD1Ev) refers to ticker.o(i._ZN4mbed6Ticker6detachEv) for mbed::Ticker::detach()
+ timeout.o(i._ZN4mbed7TimeoutD1Ev) refers to timerevent.o(i._ZN4mbed10TimerEventD2Ev) for mbed::TimerEvent::~TimerEvent__sub_object()
+ timeout.o(i._ZN4mbed7TimeoutD1Ev) refers to ticker.o(.constdata__ZTVN4mbed6TickerE) for vtable for mbed::Ticker
+ timeout.o(.ARM.exidx) refers to timeout.o(i._ZN4mbed7TimeoutD1Ev) for i._ZN4mbed7TimeoutD1Ev
+ timeout.o(i._ZN4mbed7TimeoutD0Ev) refers to ticker.o(i._ZN4mbed6Ticker6detachEv) for mbed::Ticker::detach()
+ timeout.o(i._ZN4mbed7TimeoutD0Ev) refers to timerevent.o(i._ZN4mbed10TimerEventD2Ev) for mbed::TimerEvent::~TimerEvent__sub_object()
+ timeout.o(i._ZN4mbed7TimeoutD0Ev) refers to retarget.o(i._ZdlPv) for operator delete (void*)
+ timeout.o(i._ZN4mbed7TimeoutD0Ev) refers to ticker.o(.constdata__ZTVN4mbed6TickerE) for vtable for mbed::Ticker
+ timeout.o(.ARM.exidx) refers to timeout.o(i._ZN4mbed7TimeoutD0Ev) for i._ZN4mbed7TimeoutD0Ev
+ timeout.o(.constdata__ZTIN4mbed7TimeoutE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ timeout.o(.constdata__ZTIN4mbed7TimeoutE) refers to timeout.o(.constdata__ZTSN4mbed7TimeoutE) for typeinfo name for mbed::Timeout
+ timeout.o(.constdata__ZTIN4mbed7TimeoutE) refers to ticker.o(.constdata__ZTIN4mbed6TickerE) for typeinfo for mbed::Ticker
+ timerevent.o(.constdata__ZTVN4mbed10TimerEventE) refers to timerevent.o(.constdata__ZTIN4mbed10TimerEventE) for typeinfo for mbed::TimerEvent
+ timerevent.o(.constdata__ZTVN4mbed10TimerEventE) refers to timerevent.o(i._ZN4mbed10TimerEventD2Ev) for mbed::TimerEvent::~TimerEvent__sub_object()
+ timerevent.o(.constdata__ZTVN4mbed10TimerEventE) refers to timerevent.o(i._ZN4mbed10TimerEventD0Ev) for mbed::TimerEvent::~TimerEvent__deallocating()
+ timerevent.o(.constdata__ZTVN4mbed10TimerEventE) refers to pure_virt.o(i.__cxa_pure_virtual) for __cxa_pure_virtual
+ timerevent.o(.constdata__ZTIN4mbed10TimerEventE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ timerevent.o(.constdata__ZTIN4mbed10TimerEventE) refers to timerevent.o(.constdata__ZTSN4mbed10TimerEventE) for typeinfo name for mbed::TimerEvent
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv123__fundamental_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv123__fundamental_type_infoE) for typeinfo for __cxxabiv1::__fundamental_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv123__fundamental_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv123__fundamental_type_infoD1Ev) for __cxxabiv1::__fundamental_type_info::~__fundamental_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv123__fundamental_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv123__fundamental_type_infoD0Ev) for __cxxabiv1::__fundamental_type_info::~__fundamental_type_info__deallocating()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__array_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__array_type_infoE) for typeinfo for __cxxabiv1::__array_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__array_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__array_type_infoD1Ev) for __cxxabiv1::__array_type_info::~__array_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__array_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__array_type_infoD0Ev) for __cxxabiv1::__array_type_info::~__array_type_info__deallocating()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__function_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv120__function_type_infoE) for typeinfo for __cxxabiv1::__function_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__function_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__function_type_infoD1Ev) for __cxxabiv1::__function_type_info::~__function_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__function_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__function_type_infoD0Ev) for __cxxabiv1::__function_type_info::~__function_type_info__deallocating()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv116__enum_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv116__enum_type_infoE) for typeinfo for __cxxabiv1::__enum_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv116__enum_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv116__enum_type_infoD1Ev) for __cxxabiv1::__enum_type_info::~__enum_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv116__enum_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv116__enum_type_infoD0Ev) for __cxxabiv1::__enum_type_info::~__enum_type_info__deallocating()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__class_type_infoE) for typeinfo for __cxxabiv1::__class_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__class_type_infoD1Ev) for __cxxabiv1::__class_type_info::~__class_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__class_type_infoD0Ev) for __cxxabiv1::__class_type_info::~__class_type_info__deallocating()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv120__si_class_type_infoE) for typeinfo for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__si_class_type_infoD1Ev) for __cxxabiv1::__si_class_type_info::~__si_class_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv120__si_class_type_infoD0Ev) for __cxxabiv1::__si_class_type_info::~__si_class_type_info__deallocating()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv121__vmi_class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv121__vmi_class_type_infoE) for typeinfo for __cxxabiv1::__vmi_class_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv121__vmi_class_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv121__vmi_class_type_infoD1Ev) for __cxxabiv1::__vmi_class_type_info::~__vmi_class_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv121__vmi_class_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv121__vmi_class_type_infoD0Ev) for __cxxabiv1::__vmi_class_type_info::~__vmi_class_type_info__deallocating()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__pbase_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__pbase_type_infoE) for typeinfo for __cxxabiv1::__pbase_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__pbase_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__pbase_type_infoD1Ev) for __cxxabiv1::__pbase_type_info::~__pbase_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__pbase_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv117__pbase_type_infoD0Ev) for __cxxabiv1::__pbase_type_info::~__pbase_type_info__deallocating()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv119__pointer_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv119__pointer_type_infoE) for typeinfo for __cxxabiv1::__pointer_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv119__pointer_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv119__pointer_type_infoD1Ev) for __cxxabiv1::__pointer_type_info::~__pointer_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv119__pointer_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv119__pointer_type_infoD0Ev) for __cxxabiv1::__pointer_type_info::~__pointer_type_info__deallocating()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv129__pointer_to_member_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv129__pointer_to_member_type_infoE) for typeinfo for __cxxabiv1::__pointer_to_member_type_info
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv129__pointer_to_member_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv129__pointer_to_member_type_infoD1Ev) for __cxxabiv1::__pointer_to_member_type_info::~__pointer_to_member_type_info()
+ lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv129__pointer_to_member_type_infoE) refers to lib_rtti_impl.o(i._ZN10__cxxabiv129__pointer_to_member_type_infoD0Ev) for __cxxabiv1::__pointer_to_member_type_info::~__pointer_to_member_type_info__deallocating()
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i._ZNSt9type_infodlEPv) for i._ZNSt9type_infodlEPv
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv123__fundamental_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv123__fundamental_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv123__fundamental_type_infoE) for typeinfo name for __cxxabiv1::__fundamental_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv123__fundamental_type_infoE) refers to type_info_dtor.o(.constdata__ZTISt9type_info) for typeinfo for std::type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__array_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__array_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv117__array_type_infoE) for typeinfo name for __cxxabiv1::__array_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__array_type_infoE) refers to type_info_dtor.o(.constdata__ZTISt9type_info) for typeinfo for std::type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv120__function_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv120__function_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv120__function_type_infoE) for typeinfo name for __cxxabiv1::__function_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv120__function_type_infoE) refers to type_info_dtor.o(.constdata__ZTISt9type_info) for typeinfo for std::type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv116__enum_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv116__enum_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv116__enum_type_infoE) for typeinfo name for __cxxabiv1::__enum_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv116__enum_type_infoE) refers to type_info_dtor.o(.constdata__ZTISt9type_info) for typeinfo for std::type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv117__class_type_infoE) for typeinfo name for __cxxabiv1::__class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__class_type_infoE) refers to type_info_dtor.o(.constdata__ZTISt9type_info) for typeinfo for std::type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv120__si_class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv120__si_class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv120__si_class_type_infoE) for typeinfo name for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv120__si_class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__class_type_infoE) for typeinfo for __cxxabiv1::__class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv121__vmi_class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv121__vmi_class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv121__vmi_class_type_infoE) for typeinfo name for __cxxabiv1::__vmi_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv121__vmi_class_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__class_type_infoE) for typeinfo for __cxxabiv1::__class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__pbase_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__pbase_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv117__pbase_type_infoE) for typeinfo name for __cxxabiv1::__pbase_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__pbase_type_infoE) refers to type_info_dtor.o(.constdata__ZTISt9type_info) for typeinfo for std::type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv119__pointer_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv119__pointer_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv119__pointer_type_infoE) for typeinfo name for __cxxabiv1::__pointer_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv119__pointer_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__pbase_type_infoE) for typeinfo for __cxxabiv1::__pbase_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv129__pointer_to_member_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv120__si_class_type_infoE) for vtable for __cxxabiv1::__si_class_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv129__pointer_to_member_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTSN10__cxxabiv129__pointer_to_member_type_infoE) for typeinfo name for __cxxabiv1::__pointer_to_member_type_info
+ lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv129__pointer_to_member_type_infoE) refers to lib_rtti_impl.o(.constdata__ZTIN10__cxxabiv117__pbase_type_infoE) for typeinfo for __cxxabiv1::__pbase_type_info
+ lib_rtti_impl.o(i.__ARM_common_noexcept_landing) refers to arm_exceptions_callterm.o(.text) for __cxa_call_terminate
+ lib_rtti_impl.o(.ARM.exidx) refers to lib_rtti_impl.o(i.__ARM_common_noexcept_landing) for i.__ARM_common_noexcept_landing
+ type_info_dtor.o(.constdata__ZTVSt9type_info) refers to type_info_dtor.o(.constdata__ZTISt9type_info) for typeinfo for std::type_info
+ type_info_dtor.o(.constdata__ZTVSt9type_info) refers to type_info_dtor.o(i._ZNSt9type_infoD1Ev) for std::type_info::~type_info()
+ type_info_dtor.o(.constdata__ZTVSt9type_info) refers to type_info_dtor.o(i._ZNSt9type_infoD0Ev) for std::type_info::~type_info__deallocating()
+ type_info_dtor.o(.constdata__ZTISt9type_info) refers to lib_rtti_impl.o(.constdata__ZTVN10__cxxabiv117__class_type_infoE) for vtable for __cxxabiv1::__class_type_info
+ type_info_dtor.o(.constdata__ZTISt9type_info) refers to type_info_dtor.o(.constdata__ZTSSt9type_info) for typeinfo name for std::type_info
+
+
+==============================================================================
+
+Removing Unused input sections from the image.
+
+ Removing cmsis_nvic.o(.rev16_text), (4 bytes).
+ Removing cmsis_nvic.o(.revsh_text), (4 bytes).
+ Removing cmsis_nvic.o(.rrx_text), (6 bytes).
+ Removing cmsis_nvic.o(i.__NVIC_GetVector), (16 bytes).
+ Removing hal_tick.o(.rev16_text), (4 bytes).
+ Removing hal_tick.o(.revsh_text), (4 bytes).
+ Removing hal_tick.o(.rrx_text), (6 bytes).
+ Removing hal_tick.o(i.HAL_ResumeTick), (24 bytes).
+ Removing hal_tick.o(i.HAL_SuspendTick), (24 bytes).
+ Removing peripheralpins.o(.rev16_text), (4 bytes).
+ Removing peripheralpins.o(.revsh_text), (4 bytes).
+ Removing peripheralpins.o(.rrx_text), (6 bytes).
+ Removing peripheralpins.o(.constdata), (240 bytes).
+ Removing peripheralpins.o(.constdata), (72 bytes).
+ Removing peripheralpins.o(.constdata), (60 bytes).
+ Removing peripheralpins.o(.constdata), (360 bytes).
+ Removing peripheralpins.o(.constdata), (36 bytes).
+ Removing peripheralpins.o(.constdata), (36 bytes).
+ Removing peripheralpins.o(.constdata), (72 bytes).
+ Removing peripheralpins.o(.constdata), (72 bytes).
+ Removing peripheralpins.o(.constdata), (72 bytes).
+ Removing peripheralpins.o(.constdata), (60 bytes).
+ Removing system_stm32f4xx.o(.rev16_text), (4 bytes).
+ Removing system_stm32f4xx.o(.revsh_text), (4 bytes).
+ Removing system_stm32f4xx.o(.rrx_text), (6 bytes).
+ Removing system_stm32f4xx.o(i.SetSysClock_PLL_HSI), (136 bytes).
+ Removing analogin_api.o(.rev16_text), (4 bytes).
+ Removing analogin_api.o(.revsh_text), (4 bytes).
+ Removing analogin_api.o(.rrx_text), (6 bytes).
+ Removing analogin_api.o(i.adc_read), (176 bytes).
+ Removing analogin_api.o(i.analogin_init), (348 bytes).
+ Removing analogin_api.o(i.analogin_read), (28 bytes).
+ Removing analogin_api.o(i.analogin_read_u16), (22 bytes).
+ Removing analogin_api.o(.bss), (72 bytes).
+ Removing analogin_api.o(.data), (4 bytes).
+ Removing analogout_api.o(.rev16_text), (4 bytes).
+ Removing analogout_api.o(.revsh_text), (4 bytes).
+ Removing analogout_api.o(.rrx_text), (6 bytes).
+ Removing can_api.o(.rev16_text), (4 bytes).
+ Removing can_api.o(.revsh_text), (4 bytes).
+ Removing can_api.o(.rrx_text), (6 bytes).
+ Removing gpio_api.o(.rev16_text), (4 bytes).
+ Removing gpio_api.o(.revsh_text), (4 bytes).
+ Removing gpio_api.o(.rrx_text), (6 bytes).
+ Removing gpio_api.o(i.gpio_set), (120 bytes).
+ Removing gpio_irq_api.o(.rev16_text), (4 bytes).
+ Removing gpio_irq_api.o(.revsh_text), (4 bytes).
+ Removing gpio_irq_api.o(.rrx_text), (6 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq0), (8 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq1), (8 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq2), (8 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq3), (8 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq4), (8 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq5), (8 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq6), (8 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq_disable), (32 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq_enable), (28 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq_free), (76 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq_init), (324 bytes).
+ Removing gpio_irq_api.o(i.gpio_irq_set), (120 bytes).
+ Removing gpio_irq_api.o(i.handle_interrupt_in), (128 bytes).
+ Removing gpio_irq_api.o(.bss), (532 bytes).
+ Removing gpio_irq_api.o(.data), (68 bytes).
+ Removing i2c_api.o(.rev16_text), (4 bytes).
+ Removing i2c_api.o(.revsh_text), (4 bytes).
+ Removing i2c_api.o(.rrx_text), (6 bytes).
+ Removing i2c_api.o(i.i2c_byte_read), (64 bytes).
+ Removing i2c_api.o(i.i2c_byte_write), (48 bytes).
+ Removing i2c_api.o(i.i2c_frequency), (196 bytes).
+ Removing i2c_api.o(i.i2c_init), (556 bytes).
+ Removing i2c_api.o(i.i2c_read), (332 bytes).
+ Removing i2c_api.o(i.i2c_reset), (120 bytes).
+ Removing i2c_api.o(i.i2c_slave_address), (20 bytes).
+ Removing i2c_api.o(i.i2c_slave_mode), (32 bytes).
+ Removing i2c_api.o(i.i2c_slave_read), (184 bytes).
+ Removing i2c_api.o(i.i2c_slave_receive), (48 bytes).
+ Removing i2c_api.o(i.i2c_slave_write), (188 bytes).
+ Removing i2c_api.o(i.i2c_write), (308 bytes).
+ Removing i2c_api.o(.bss), (84 bytes).
+ Removing i2c_api.o(.data), (12 bytes).
+ Removing i2c_api.o(.data), (4 bytes).
+ Removing mbed_overrides.o(.rev16_text), (4 bytes).
+ Removing mbed_overrides.o(.revsh_text), (4 bytes).
+ Removing mbed_overrides.o(.rrx_text), (6 bytes).
+ Removing mbed_overrides.o(i.HAL_Delay), (32 bytes).
+ Removing pinmap.o(.rev16_text), (4 bytes).
+ Removing pinmap.o(.revsh_text), (4 bytes).
+ Removing pinmap.o(.rrx_text), (6 bytes).
+ Removing port_api.o(.rev16_text), (4 bytes).
+ Removing port_api.o(.revsh_text), (4 bytes).
+ Removing port_api.o(.rrx_text), (6 bytes).
+ Removing port_api.o(i.port_dir), (56 bytes).
+ Removing port_api.o(i.port_init), (80 bytes).
+ Removing port_api.o(i.port_mode), (46 bytes).
+ Removing port_api.o(i.port_pin), (8 bytes).
+ Removing port_api.o(i.port_read), (24 bytes).
+ Removing port_api.o(i.port_write), (16 bytes).
+ Removing pwmout_api.o(.rev16_text), (4 bytes).
+ Removing pwmout_api.o(.revsh_text), (4 bytes).
+ Removing pwmout_api.o(.rrx_text), (6 bytes).
+ Removing pwmout_api.o(i.pwmout_free), (10 bytes).
+ Removing pwmout_api.o(i.pwmout_init), (452 bytes).
+ Removing pwmout_api.o(i.pwmout_period), (24 bytes).
+ Removing pwmout_api.o(i.pwmout_period_ms), (10 bytes).
+ Removing pwmout_api.o(i.pwmout_period_us), (420 bytes).
+ Removing pwmout_api.o(i.pwmout_pulsewidth), (36 bytes).
+ Removing pwmout_api.o(i.pwmout_pulsewidth_ms), (30 bytes).
+ Removing pwmout_api.o(i.pwmout_pulsewidth_us), (24 bytes).
+ Removing pwmout_api.o(i.pwmout_read), (52 bytes).
+ Removing pwmout_api.o(i.pwmout_write), (204 bytes).
+ Removing pwmout_api.o(.bss), (60 bytes).
+ Removing rtc_api.o(.rev16_text), (4 bytes).
+ Removing rtc_api.o(.revsh_text), (4 bytes).
+ Removing rtc_api.o(.rrx_text), (6 bytes).
+ Removing rtc_api.o(i.rtc_free), (26 bytes).
+ Removing rtc_api.o(i.rtc_init), (224 bytes).
+ Removing rtc_api.o(i.rtc_isenabled), (20 bytes).
+ Removing rtc_api.o(i.rtc_read), (100 bytes).
+ Removing rtc_api.o(i.rtc_write), (104 bytes).
+ Removing rtc_api.o(.bss), (32 bytes).
+ Removing serial_api.o(.rev16_text), (4 bytes).
+ Removing serial_api.o(.revsh_text), (4 bytes).
+ Removing serial_api.o(.rrx_text), (6 bytes).
+ Removing serial_api.o(i.serial_break_clear), (2 bytes).
+ Removing serial_api.o(i.serial_break_set), (16 bytes).
+ Removing serial_api.o(i.serial_clear), (20 bytes).
+ Removing serial_api.o(i.serial_format), (68 bytes).
+ Removing serial_api.o(i.serial_free), (152 bytes).
+ Removing serial_api.o(i.serial_getc), (32 bytes).
+ Removing serial_api.o(i.serial_irq_set), (188 bytes).
+ Removing serial_api.o(i.serial_pinout_tx), (12 bytes).
+ Removing serial_api.o(i.serial_readable), (24 bytes).
+ Removing serial_api.o(i.serial_rx_abort_asynch), (84 bytes).
+ Removing serial_api.o(i.serial_rx_active), (52 bytes).
+ Removing serial_api.o(i.serial_rx_asynch), (336 bytes).
+ Removing serial_api.o(i.serial_set_flow_control), (380 bytes).
+ Removing serial_api.o(i.serial_tx_abort_asynch), (64 bytes).
+ Removing serial_api.o(i.serial_tx_active), (108 bytes).
+ Removing serial_api.o(i.serial_tx_asynch), (328 bytes).
+ Removing serial_api.o(i.serial_writable), (24 bytes).
+ Removing serial_api.o(i.uart1_irq), (6 bytes).
+ Removing serial_api.o(i.uart2_irq), (6 bytes).
+ Removing serial_api.o(i.uart6_irq), (6 bytes).
+ Removing serial_api.o(i.uart_irq), (124 bytes).
+ Removing sleep.o(.rev16_text), (4 bytes).
+ Removing sleep.o(.revsh_text), (4 bytes).
+ Removing sleep.o(.rrx_text), (6 bytes).
+ Removing sleep.o(i.deepsleep), (18 bytes).
+ Removing sleep.o(i.sleep), (22 bytes).
+ Removing spi_api.o(.rev16_text), (4 bytes).
+ Removing spi_api.o(.revsh_text), (4 bytes).
+ Removing spi_api.o(.rrx_text), (6 bytes).
+ Removing spi_api.o(i.init_spi), (112 bytes).
+ Removing spi_api.o(i.spi_busy), (20 bytes).
+ Removing spi_api.o(i.spi_format), (102 bytes).
+ Removing spi_api.o(i.spi_free), (240 bytes).
+ Removing spi_api.o(i.spi_frequency), (184 bytes).
+ Removing spi_api.o(i.spi_init), (404 bytes).
+ Removing spi_api.o(i.spi_master_write), (48 bytes).
+ Removing spi_api.o(i.spi_slave_read), (24 bytes).
+ Removing spi_api.o(i.spi_slave_receive), (40 bytes).
+ Removing spi_api.o(i.spi_slave_write), (32 bytes).
+ Removing spi_api.o(.bss), (88 bytes).
+ Removing spi_api.o(.constdata), (16 bytes).
+ Removing stm32f4xx_hal.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_DBGMCU_DisableDBGSleepMode), (16 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_DBGMCU_DisableDBGStandbyMode), (16 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_DBGMCU_DisableDBGStopMode), (16 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_DBGMCU_EnableDBGSleepMode), (16 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_DBGMCU_EnableDBGStandbyMode), (16 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_DBGMCU_EnableDBGStopMode), (16 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_DeInit), (56 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_Delay), (22 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_DisableCompensationCell), (28 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_EnableCompensationCell), (26 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_GetDEVID), (16 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_GetHalVersion), (8 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_GetREVID), (12 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_InitTick), (40 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_MspInit), (2 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_ResumeTick), (14 bytes).
+ Removing stm32f4xx_hal.o(i.HAL_SuspendTick), (14 bytes).
+ Removing stm32f4xx_hal_adc.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_adc.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_adc.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_adc.o(i.ADC_DMAConvCplt), (104 bytes).
+ Removing stm32f4xx_hal_adc.o(i.ADC_DMAError), (22 bytes).
+ Removing stm32f4xx_hal_adc.o(i.ADC_DMAHalfConvCplt), (10 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_AnalogWDGConfig), (110 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_ConfigChannel), (436 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_ConvCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_ConvHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_DeInit), (62 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_ErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_GetError), (4 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_GetState), (4 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_GetValue), (6 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_IRQHandler), (342 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_Init), (384 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_LevelOutOfWindowCallback), (2 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_PollForConversion), (188 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_PollForEvent), (126 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_Start), (268 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_Start_DMA), (348 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_Start_IT), (284 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_Stop), (60 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_Stop_DMA), (88 bytes).
+ Removing stm32f4xx_hal_adc.o(i.HAL_ADC_Stop_IT), (72 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.ADC_MultiModeDMAConvCplt), (96 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.ADC_MultiModeDMAError), (18 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.ADC_MultiModeDMAHalfConvCplt), (6 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedConfigChannel), (512 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedConvCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedGetValue), (64 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedPollForConversion), (156 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedStart), (276 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedStart_IT), (284 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedStop), (90 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_InjectedStop_IT), (98 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeConfigChannel), (116 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeGetValue), (12 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeStart_DMA), (332 bytes).
+ Removing stm32f4xx_hal_adc_ex.o(i.HAL_ADCEx_MultiModeStop_DMA), (100 bytes).
+ Removing stm32f4xx_hal_can.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_can.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_can.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_cec.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_cec.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_cec.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_cortex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_cortex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_cortex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_MPU_ConfigRegion), (84 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_ClearPendingIRQ), (24 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_DisableIRQ), (24 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_EnableIRQ), (24 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_GetActive), (30 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_GetPendingIRQ), (30 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_GetPriority), (86 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_GetPriorityGrouping), (16 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_SetPendingIRQ), (24 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_SetPriority), (100 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_NVIC_SystemReset), (36 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_SYSTICK_CLKSourceConfig), (22 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_SYSTICK_Callback), (2 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_SYSTICK_Config), (44 bytes).
+ Removing stm32f4xx_hal_cortex.o(i.HAL_SYSTICK_IRQHandler), (8 bytes).
+ Removing stm32f4xx_hal_crc.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_crc.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_crc.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_crc.o(i.HAL_CRC_Accumulate), (84 bytes).
+ Removing stm32f4xx_hal_crc.o(i.HAL_CRC_Calculate), (92 bytes).
+ Removing stm32f4xx_hal_crc.o(i.HAL_CRC_DeInit), (30 bytes).
+ Removing stm32f4xx_hal_crc.o(i.HAL_CRC_GetState), (4 bytes).
+ Removing stm32f4xx_hal_crc.o(i.HAL_CRC_Init), (38 bytes).
+ Removing stm32f4xx_hal_crc.o(i.HAL_CRC_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_crc.o(i.HAL_CRC_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_cryp.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_cryp.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_cryp.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_cryp_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_cryp_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_cryp_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_dac.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_dac.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_dac.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_dac_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_dac_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_dac_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_dcmi.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_dcmi.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_dcmi.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_dcmi_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_dcmi_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_dcmi_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_dfsdm.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_dfsdm.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_dfsdm.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_dma.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_dma.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_dma.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_Abort), (166 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_DeInit), (128 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_GetError), (4 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_GetState), (6 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_IRQHandler), (480 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_Init), (360 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_PollForTransfer), (448 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_RegisterCallback), (86 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_Start), (108 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_Start_IT), (156 bytes).
+ Removing stm32f4xx_hal_dma.o(i.HAL_DMA_UnRegisterCallback), (96 bytes).
+ Removing stm32f4xx_hal_dma.o(.constdata), (8 bytes).
+ Removing stm32f4xx_hal_dma2d.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_dma2d.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_dma2d.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_dma_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_dma_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_dma_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_dma_ex.o(i.HAL_DMAEx_ChangeMemory), (14 bytes).
+ Removing stm32f4xx_hal_dma_ex.o(i.HAL_DMAEx_MultiBufferStart), (124 bytes).
+ Removing stm32f4xx_hal_dma_ex.o(i.HAL_DMAEx_MultiBufferStart_IT), (2020 bytes).
+ Removing stm32f4xx_hal_dsi.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_dsi.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_dsi.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_eth.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_eth.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_eth.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_flash.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_flash.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_flash.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_flash.o(i.FLASH_SetErrorCode), (140 bytes).
+ Removing stm32f4xx_hal_flash.o(i.FLASH_WaitForLastOperation), (104 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_EndOfOperationCallback), (2 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_GetError), (12 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_IRQHandler), (212 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_Lock), (20 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_OB_Launch), (24 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_OB_Lock), (20 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_OB_Unlock), (44 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_OperationErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_Program), (196 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_Program_IT), (252 bytes).
+ Removing stm32f4xx_hal_flash.o(i.HAL_FLASH_Unlock), (44 bytes).
+ Removing stm32f4xx_hal_flash.o(.bss), (32 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.FLASH_Erase_Sector), (88 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.FLASH_FlushCaches), (92 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_AdvOBGetConfig), (12 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_AdvOBProgram), (68 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_Erase), (348 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_Erase_IT), (236 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_OBGetConfig), (68 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_OBProgram), (212 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_OB_DeSelectPCROP), (20 bytes).
+ Removing stm32f4xx_hal_flash_ex.o(i.HAL_FLASHEx_OB_SelectPCROP), (24 bytes).
+ Removing stm32f4xx_hal_flash_ramfunc.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_flash_ramfunc.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_flash_ramfunc.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_fmpi2c.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_fmpi2c.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_fmpi2c.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_fmpi2c_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_fmpi2c_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_fmpi2c_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_gpio.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_gpio.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_gpio.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_gpio.o(i.HAL_GPIO_DeInit), (320 bytes).
+ Removing stm32f4xx_hal_gpio.o(i.HAL_GPIO_EXTI_Callback), (2 bytes).
+ Removing stm32f4xx_hal_gpio.o(i.HAL_GPIO_EXTI_IRQHandler), (24 bytes).
+ Removing stm32f4xx_hal_gpio.o(i.HAL_GPIO_LockPin), (36 bytes).
+ Removing stm32f4xx_hal_gpio.o(i.HAL_GPIO_ReadPin), (10 bytes).
+ Removing stm32f4xx_hal_gpio.o(i.HAL_GPIO_TogglePin), (8 bytes).
+ Removing stm32f4xx_hal_gpio.o(i.HAL_GPIO_WritePin), (10 bytes).
+ Removing stm32f4xx_hal_hash.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_hash.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_hash.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_hash_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_hash_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_hash_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_hcd.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_hcd.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_hcd.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_Connect_Callback), (2 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_DeInit), (38 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_Disconnect_Callback), (2 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_GetCurrentFrame), (6 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_GetCurrentSpeed), (6 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_GetState), (6 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_GetState), (14 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_GetURBState), (14 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_GetXferCount), (12 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_Halt), (36 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_Init), (100 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_NotifyURBChange_Callback), (2 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_HC_SubmitRequest), (216 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_IRQHandler), (1848 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_Init), (112 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_ResetPort), (6 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_SOF_Callback), (2 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_Start), (44 bytes).
+ Removing stm32f4xx_hal_hcd.o(i.HAL_HCD_Stop), (36 bytes).
+ Removing stm32f4xx_hal_i2c.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_i2c.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_i2c.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_AbortCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_AddrCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_DeInit), (54 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_DisableListen_IT), (64 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_ER_IRQHandler), (532 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_EV_IRQHandler), (1640 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_EnableListen_IT), (42 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_ErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_GetError), (4 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_GetMode), (6 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_GetState), (6 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Init), (264 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_IsDeviceReady), (332 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_ListenCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_MasterRxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_MasterTxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Abort_IT), (100 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive), (668 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive_DMA), (360 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Receive_IT), (208 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Sequential_Receive_IT), (224 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Sequential_Transmit_IT), (200 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit), (372 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit_DMA), (332 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Master_Transmit_IT), (196 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_MemRxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_MemTxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read), (676 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read_DMA), (384 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Read_IT), (224 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write), (380 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_DMA), (344 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Mem_Write_IT), (212 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_SlaveRxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_SlaveTxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive), (464 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive_DMA), (296 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Receive_IT), (184 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Sequential_Receive_IT), (122 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Sequential_Transmit_IT), (122 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit), (328 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit_DMA), (344 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.HAL_I2C_Slave_Transmit_IT), (184 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_DMAAbort), (56 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_DMAError), (42 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_DMAXferCplt), (136 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_MasterRequestRead), (248 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_MasterRequestWrite), (160 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryRead), (276 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_RequestMemoryWrite), (180 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_WaitOnFlagUntilTimeout), (154 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_WaitOnMasterAddressFlagUntilTimeout), (180 bytes).
+ Removing stm32f4xx_hal_i2c.o(i.I2C_WaitOnTXEFlagUntilTimeout), (124 bytes).
+ Removing stm32f4xx_hal_i2c_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_i2c_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_i2c_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_i2c_ex.o(i.HAL_I2CEx_ConfigAnalogFilter), (66 bytes).
+ Removing stm32f4xx_hal_i2c_ex.o(i.HAL_I2CEx_ConfigDigitalFilter), (62 bytes).
+ Removing stm32f4xx_hal_i2s.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_i2s.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_i2s.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_DMAPause), (88 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_DMAResume), (108 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_DMAStop), (84 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_DeInit), (38 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_ErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_GetError), (4 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_GetState), (6 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_IRQHandler), (328 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_Init), (228 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_Receive), (232 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_Receive_DMA), (196 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_Receive_IT), (118 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_RxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_RxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_Transmit), (260 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_Transmit_DMA), (176 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_Transmit_IT), (118 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_TxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.HAL_I2S_TxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.I2S_DMAError), (30 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.I2S_DMARxHalfCplt), (10 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.I2S_DMATxHalfCplt), (10 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.I2S_Receive_IT), (126 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.I2S_Transmit_IT), (92 bytes).
+ Removing stm32f4xx_hal_i2s.o(i.I2S_WaitFlagStateUntilTimeout), (126 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive), (564 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive_DMA), (488 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.HAL_I2SEx_TransmitReceive_IT), (400 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_DMAPause), (172 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_DMAResume), (192 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_DMAStop), (200 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_IRQHandler), (548 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.HAL_I2S_Init), (440 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.I2SEx_TransmitReceive_IT), (408 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.I2S_DMARxCplt), (116 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.I2S_DMATxCplt), (120 bytes).
+ Removing stm32f4xx_hal_i2s_ex.o(i.I2S_GetInputClock), (76 bytes).
+ Removing stm32f4xx_hal_irda.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_irda.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_irda.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_DMAPause), (100 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_DMAResume), (94 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_DMAStop), (120 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_DeInit), (52 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_ErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_GetError), (4 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_GetState), (12 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_IRQHandler), (684 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_Init), (584 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_Receive), (278 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_Receive_DMA), (148 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_Receive_IT), (84 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_RxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_RxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_Transmit), (290 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_Transmit_DMA), (132 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_Transmit_IT), (64 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_TxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_irda.o(i.HAL_IRDA_TxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_irda.o(i.IRDA_DMAAbortOnError), (16 bytes).
+ Removing stm32f4xx_hal_irda.o(i.IRDA_DMAError), (110 bytes).
+ Removing stm32f4xx_hal_irda.o(i.IRDA_DMAReceiveCplt), (62 bytes).
+ Removing stm32f4xx_hal_irda.o(i.IRDA_DMAReceiveHalfCplt), (10 bytes).
+ Removing stm32f4xx_hal_irda.o(i.IRDA_DMATransmitCplt), (48 bytes).
+ Removing stm32f4xx_hal_irda.o(i.IRDA_DMATransmitHalfCplt), (10 bytes).
+ Removing stm32f4xx_hal_irda.o(i.IRDA_WaitOnFlagUntilTimeout), (100 bytes).
+ Removing stm32f4xx_hal_iwdg.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_iwdg.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_iwdg.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_iwdg.o(i.HAL_IWDG_Init), (86 bytes).
+ Removing stm32f4xx_hal_iwdg.o(i.HAL_IWDG_Refresh), (12 bytes).
+ Removing stm32f4xx_hal_lptim.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_lptim.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_lptim.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_ltdc.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_ltdc.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_ltdc.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_ltdc_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_ltdc_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_ltdc_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_msp_template.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_msp_template.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_msp_template.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_msp_template.o(i.HAL_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_msp_template.o(i.HAL_PPP_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_msp_template.o(i.HAL_PPP_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_nand.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_nand.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_nand.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_nor.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_nor.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_nor.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_pccard.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_pccard.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_pccard.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_pcd.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_pcd.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_pcd.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_ActivateRemoteWakeup), (28 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_ConnectCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_DataInStageCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_DataOutStageCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_DeActivateRemoteWakeup), (18 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_DeInit), (70 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_DevConnect), (36 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_DevDisconnect), (36 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_DisconnectCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Close), (70 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_ClrStall), (78 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Flush), (54 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_GetRxCount), (20 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Open), (88 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Receive), (94 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_SetStall), (94 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_EP_Transmit), (90 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_GetState), (6 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_IRQHandler), (1262 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_ISOINIncompleteCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_ISOOUTIncompleteCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_Init), (212 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_ResetCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_ResumeCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_SOFCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_SetAddress), (36 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_SetupStageCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_Start), (42 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_Stop), (48 bytes).
+ Removing stm32f4xx_hal_pcd.o(i.HAL_PCD_SuspendCallback), (2 bytes).
+ Removing stm32f4xx_hal_pcd_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_pcd_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_pcd_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_pcd_ex.o(i.HAL_PCDEx_SetRxFiFo), (8 bytes).
+ Removing stm32f4xx_hal_pcd_ex.o(i.HAL_PCDEx_SetTxFiFo), (78 bytes).
+ Removing stm32f4xx_hal_pwr.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_pwr.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_pwr.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_ConfigPVD), (152 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_DeInit), (24 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_DisableBkUpAccess), (28 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_DisablePVD), (26 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_DisableSEVOnPend), (16 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_DisableSleepOnExit), (16 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_DisableWakeUpPin), (16 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_EnableBkUpAccess), (26 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_EnablePVD), (26 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_EnableSEVOnPend), (16 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_EnableSleepOnExit), (16 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_EnableWakeUpPin), (16 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_EnterSLEEPMode), (32 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_EnterSTANDBYMode), (32 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_EnterSTOPMode), (52 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_PVDCallback), (2 bytes).
+ Removing stm32f4xx_hal_pwr.o(i.HAL_PWR_PVD_IRQHandler), (32 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_ControlVoltageScaling), (208 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_DisableBkUpReg), (80 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_DisableFlashPowerDown), (28 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_DisableLowRegulatorLowVoltage), (28 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_DisableMainRegulatorLowVoltage), (28 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_EnableBkUpReg), (76 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_EnableFlashPowerDown), (26 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_EnableLowRegulatorLowVoltage), (26 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_EnableMainRegulatorLowVoltage), (26 bytes).
+ Removing stm32f4xx_hal_pwr_ex.o(i.HAL_PWREx_GetVoltageRange), (16 bytes).
+ Removing stm32f4xx_hal_qspi.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_qspi.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_qspi.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_rcc.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_rcc.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_rcc.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_rcc.o(i.HAL_RCC_CSSCallback), (2 bytes).
+ Removing stm32f4xx_hal_rcc.o(i.HAL_RCC_DeInit), (2 bytes).
+ Removing stm32f4xx_hal_rcc.o(i.HAL_RCC_DisableCSS), (12 bytes).
+ Removing stm32f4xx_hal_rcc.o(i.HAL_RCC_EnableCSS), (12 bytes).
+ Removing stm32f4xx_hal_rcc.o(i.HAL_RCC_GetClockConfig), (64 bytes).
+ Removing stm32f4xx_hal_rcc.o(i.HAL_RCC_GetHCLKFreq), (12 bytes).
+ Removing stm32f4xx_hal_rcc.o(i.HAL_RCC_GetOscConfig), (256 bytes).
+ Removing stm32f4xx_hal_rcc.o(i.HAL_RCC_MCOConfig), (148 bytes).
+ Removing stm32f4xx_hal_rcc.o(i.HAL_RCC_NMI_IRQHandler), (36 bytes).
+ Removing stm32f4xx_hal_rcc_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_rcc_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_rcc_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_rcc_ex.o(i.HAL_RCCEx_GetPeriphCLKConfig), (104 bytes).
+ Removing stm32f4xx_hal_rcc_ex.o(i.HAL_RCCEx_PeriphCLKConfig), (456 bytes).
+ Removing stm32f4xx_hal_rcc_ex.o(i.HAL_RCC_DeInit), (108 bytes).
+ Removing stm32f4xx_hal_rng.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_rng.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_rng.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_rtc.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_rtc.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_rtc.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_AlarmAEventCallback), (2 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_AlarmIRQHandler), (100 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_DeInit), (316 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_DeactivateAlarm), (206 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_GetAlarm), (166 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_GetDate), (98 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_GetState), (4 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_GetTime), (120 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_Init), (204 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_PollForAlarmAEvent), (80 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_SetAlarm), (376 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_SetAlarm_IT), (404 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_SetDate), (298 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_SetTime), (328 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.HAL_RTC_WaitForSynchro), (62 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.RTC_Bcd2ToByte), (18 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.RTC_ByteToBcd2), (48 bytes).
+ Removing stm32f4xx_hal_rtc.o(i.RTC_EnterInitMode), (66 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_AlarmBEventCallback), (2 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_BKUPRead), (10 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_BKUPWrite), (10 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DeactivateCalibrationOutPut), (56 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DeactivateCoarseCalib), (96 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DeactivateRefClock), (96 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DeactivateTamper), (40 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DeactivateTimeStamp), (70 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DeactivateWakeUpTimer), (136 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_DisableBypassShadow), (56 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_EnableBypassShadow), (56 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_GetTimeStamp), (148 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_GetWakeUpTimer), (8 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForAlarmBEvent), (80 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForTamper1Event), (80 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForTamper2Event), (80 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForTimeStampEvent), (96 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_PollForWakeUpTimerEvent), (80 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetCalibrationOutPut), (90 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetCoarseCalib), (116 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetRefClock), (96 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetSmoothCalib), (144 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetSynchroShift), (178 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetTamper), (124 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetTamper_IT), (184 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetTimeStamp), (100 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetTimeStamp_IT), (152 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetWakeUpTimer), (222 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_SetWakeUpTimer_IT), (288 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_Tamper1EventCallback), (2 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_Tamper2EventCallback), (2 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_TamperTimeStampIRQHandler), (136 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_TimeStampEventCallback), (2 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_WakeUpTimerEventCallback), (2 bytes).
+ Removing stm32f4xx_hal_rtc_ex.o(i.HAL_RTCEx_WakeUpTimerIRQHandler), (60 bytes).
+ Removing stm32f4xx_hal_sai.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_sai.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_sai.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_sai_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_sai_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_sai_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_sd.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_sd.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_sd.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_CheckReadOperation), (136 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_CheckWriteOperation), (206 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_DMA_RxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_DMA_RxErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_DMA_TxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_DMA_TxErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_DeInit), (20 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_Erase), (292 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_GetCardStatus), (118 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_GetStatus), (82 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_Get_CardInfo), (704 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_HighSpeed), (392 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_IRQHandler), (170 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_Init), (968 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks), (488 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_ReadBlocks_DMA), (248 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_SendSDStatus), (360 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_StopTransfer), (44 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_WideBusOperation_Config), (312 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks), (588 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_WriteBlocks_DMA), (252 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_XferCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_sd.o(i.HAL_SD_XferErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_sd.o(i.SD_CmdResp1Error), (276 bytes).
+ Removing stm32f4xx_hal_sd.o(i.SD_DMA_RxCplt), (26 bytes).
+ Removing stm32f4xx_hal_sd.o(i.SD_DMA_RxError), (12 bytes).
+ Removing stm32f4xx_hal_sd.o(i.SD_DMA_TxCplt), (26 bytes).
+ Removing stm32f4xx_hal_sd.o(i.SD_DMA_TxError), (12 bytes).
+ Removing stm32f4xx_hal_sd.o(i.SD_FindSCR), (322 bytes).
+ Removing stm32f4xx_hal_sd.o(i.SD_IsCardProgramming), (404 bytes).
+ Removing stm32f4xx_hal_sdram.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_sdram.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_sdram.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_smartcard.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_smartcard.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_smartcard.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_DeInit), (52 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_ErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_GetError), (4 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_GetState), (12 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_IRQHandler), (544 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Init), (640 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Receive), (194 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Receive_DMA), (136 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Receive_IT), (84 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_RxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Transmit), (242 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Transmit_DMA), (124 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_Transmit_IT), (84 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.HAL_SMARTCARD_TxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAAbortOnError), (16 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAError), (96 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMAReceiveCplt), (50 bytes).
+ Removing stm32f4xx_hal_smartcard.o(i.SMARTCARD_DMATransmitCplt), (28 bytes).
+ Removing stm32f4xx_hal_spdifrx.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_spdifrx.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_spdifrx.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_spi.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_spi.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_spi.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_DMAStop), (44 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_DeInit), (48 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_ErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_GetError), (4 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_GetState), (6 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_IRQHandler), (244 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_Init), (140 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_Receive), (520 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_DMA), (256 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_Receive_IT), (212 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_RxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_RxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit), (566 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive), (776 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_DMA), (304 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_TransmitReceive_IT), (204 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit_DMA), (216 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_Transmit_IT), (192 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_TxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_TxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_TxRxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_spi.o(i.HAL_SPI_TxRxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_16BIT), (68 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_16BITCRC), (34 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_8BIT), (68 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_2linesRxISR_8BITCRC), (44 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_2linesTxISR_16BIT), (78 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_2linesTxISR_8BIT), (76 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_CloseRxTx_ISR), (196 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_CloseRx_ISR), (108 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_DMAAbortOnError), (16 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_DMAError), (34 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_DMAHalfReceiveCplt), (10 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_DMAHalfTransmitCplt), (10 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_DMAHalfTransmitReceiveCplt), (10 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_DMAReceiveCplt), (164 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_DMATransmitCplt), (104 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_DMATransmitReceiveCplt), (168 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_RxISR_16BIT), (76 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_RxISR_16BITCRC), (34 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_RxISR_8BIT), (72 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_RxISR_8BITCRC), (26 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_TxISR_16BIT), (188 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_TxISR_8BIT), (184 bytes).
+ Removing stm32f4xx_hal_spi.o(i.SPI_WaitFlagStateUntilTimeout), (154 bytes).
+ Removing stm32f4xx_hal_sram.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_sram.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_sram.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_tim.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_tim.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_tim.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_DeInit), (56 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_GetState), (6 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Init), (54 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Start), (26 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Start_DMA), (100 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Start_IT), (24 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Stop), (44 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Stop_DMA), (48 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Base_Stop_IT), (42 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_ConfigClockSource), (440 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_ConfigOCrefClear), (174 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_ConfigTI1Input), (16 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_ReadStart), (332 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_ReadStop), (100 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_WriteStart), (332 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_DMABurst_WriteStop), (100 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_DeInit), (56 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_GetState), (6 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Init), (172 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Start), (88 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Start_DMA), (324 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Start_IT), (128 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Stop), (92 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Stop_DMA), (142 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_Encoder_Stop_IT), (142 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_ErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_GenerateEvent), (38 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_CaptureCallback), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_ConfigChannel), (440 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_DeInit), (56 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_GetState), (6 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Init), (54 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Start), (34 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Start_DMA), (236 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Start_IT), (86 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Stop), (72 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Stop_DMA), (128 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IC_Stop_IT), (124 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_IRQHandler), (364 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_ConfigChannel), (408 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_DeInit), (56 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_DelayElapsedCallback), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_GetState), (6 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Start_DMA), (256 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Start_IT), (106 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Stop), (114 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Stop_DMA), (158 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Stop_IT), (166 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_ConfigChannel), (532 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_DeInit), (56 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_GetState), (6 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_Init), (74 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_Start), (60 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_Start_IT), (80 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_Stop), (102 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_OnePulse_Stop_IT), (122 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_ConfigChannel), (532 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_DeInit), (56 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_GetState), (6 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Init), (54 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_PulseFinishedCallback), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Start), (54 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Start_DMA), (256 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Start_IT), (106 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Stop), (110 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Stop_DMA), (158 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PWM_Stop_IT), (166 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_PeriodElapsedCallback), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_ReadCapturedValue), (68 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_SlaveConfigSynchronization), (66 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_SlaveConfigSynchronization_IT), (66 bytes).
+ Removing stm32f4xx_hal_tim.o(i.HAL_TIM_TriggerCallback), (2 bytes).
+ Removing stm32f4xx_hal_tim.o(i.TIM_CCxChannelCmd), (26 bytes).
+ Removing stm32f4xx_hal_tim.o(i.TIM_DMACaptureCplt), (66 bytes).
+ Removing stm32f4xx_hal_tim.o(i.TIM_DMADelayPulseCplt), (66 bytes).
+ Removing stm32f4xx_hal_tim.o(i.TIM_DMAError), (16 bytes).
+ Removing stm32f4xx_hal_tim.o(i.TIM_DMAPeriodElapsedCplt), (16 bytes).
+ Removing stm32f4xx_hal_tim.o(i.TIM_DMATriggerCplt), (16 bytes).
+ Removing stm32f4xx_hal_tim.o(i.TIM_OC2_SetConfig), (94 bytes).
+ Removing stm32f4xx_hal_tim.o(i.TIM_SlaveTimer_SetConfig), (216 bytes).
+ Removing stm32f4xx_hal_tim.o(i.TIM_TI1_SetConfig), (124 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_BreakCallback), (2 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_CommutationCallback), (2 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_ConfigBreakDeadTime), (86 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_ConfigCommutationEvent), (98 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_ConfigCommutationEvent_DMA), (128 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_ConfigCommutationEvent_IT), (108 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_DeInit), (56 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_GetState), (6 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Init), (178 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Start), (28 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Start_DMA), (112 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Start_IT), (38 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Stop), (46 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Stop_DMA), (56 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_HallSensor_Stop_IT), (56 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_MasterConfigSynchronization), (100 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OCN_Start), (44 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OCN_Start_DMA), (244 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OCN_Start_IT), (106 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OCN_Stop), (104 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OCN_Stop_DMA), (166 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OCN_Stop_IT), (176 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OnePulseN_Start), (34 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OnePulseN_Start_IT), (54 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OnePulseN_Stop), (104 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_OnePulseN_Stop_IT), (124 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Start), (44 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Start_DMA), (244 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Start_IT), (106 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Stop), (104 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Stop_DMA), (166 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_PWMN_Stop_IT), (176 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.HAL_TIMEx_RemapConfig), (32 bytes).
+ Removing stm32f4xx_hal_tim_ex.o(i.TIMEx_DMACommutationCplt), (16 bytes).
+ Removing stm32f4xx_hal_uart.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_uart.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_uart.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_HalfDuplex_EnableReceiver), (54 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_HalfDuplex_EnableTransmitter), (54 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_HalfDuplex_Init), (108 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_LIN_Init), (128 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_LIN_SendBreak), (50 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_MultiProcessor_EnterMuteMode), (50 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_MultiProcessor_ExitMuteMode), (50 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_MultiProcessor_Init), (142 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_DMAPause), (100 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_DMAResume), (96 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_DMAStop), (120 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_DeInit), (42 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_ErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_GetError), (4 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_GetState), (12 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_Receive), (278 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_Receive_DMA), (148 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_Receive_IT), (84 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_RxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_Transmit), (290 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_Transmit_DMA), (132 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_Transmit_IT), (64 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_TxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_uart.o(i.HAL_UART_TxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_uart.o(i.UART_DMAError), (110 bytes).
+ Removing stm32f4xx_hal_uart.o(i.UART_DMAReceiveCplt), (62 bytes).
+ Removing stm32f4xx_hal_uart.o(i.UART_DMARxHalfCplt), (10 bytes).
+ Removing stm32f4xx_hal_uart.o(i.UART_DMATransmitCplt), (48 bytes).
+ Removing stm32f4xx_hal_uart.o(i.UART_DMATxHalfCplt), (10 bytes).
+ Removing stm32f4xx_hal_uart.o(i.UART_WaitOnFlagUntilTimeout), (100 bytes).
+ Removing stm32f4xx_hal_usart.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_usart.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_usart.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_DMAPause), (38 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_DMAResume), (38 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_DMAStop), (120 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_DeInit), (48 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_ErrorCallback), (2 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_GetError), (4 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_GetState), (6 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_IRQHandler), (460 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_Init), (404 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_MspDeInit), (2 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_Receive), (258 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_Receive_DMA), (196 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_Receive_IT), (92 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_RxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_RxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_Transmit), (200 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive), (286 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive_DMA), (212 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_TransmitReceive_IT), (106 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_Transmit_DMA), (132 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_Transmit_IT), (64 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_TxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_TxHalfCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_usart.o(i.HAL_USART_TxRxCpltCallback), (2 bytes).
+ Removing stm32f4xx_hal_usart.o(i.USART_DMAAbortOnError), (16 bytes).
+ Removing stm32f4xx_hal_usart.o(i.USART_DMAError), (104 bytes).
+ Removing stm32f4xx_hal_usart.o(i.USART_DMAReceiveCplt), (110 bytes).
+ Removing stm32f4xx_hal_usart.o(i.USART_DMARxHalfCplt), (10 bytes).
+ Removing stm32f4xx_hal_usart.o(i.USART_DMATransmitCplt), (66 bytes).
+ Removing stm32f4xx_hal_usart.o(i.USART_DMATxHalfCplt), (10 bytes).
+ Removing stm32f4xx_hal_usart.o(i.USART_Receive_IT), (180 bytes).
+ Removing stm32f4xx_hal_usart.o(i.USART_TransmitReceive_IT), (236 bytes).
+ Removing stm32f4xx_hal_usart.o(i.USART_WaitOnFlagUntilTimeout), (116 bytes).
+ Removing stm32f4xx_hal_wwdg.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_hal_wwdg.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_hal_wwdg.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_hal_wwdg.o(i.HAL_WWDG_EarlyWakeupCallback), (2 bytes).
+ Removing stm32f4xx_hal_wwdg.o(i.HAL_WWDG_IRQHandler), (32 bytes).
+ Removing stm32f4xx_hal_wwdg.o(i.HAL_WWDG_Init), (44 bytes).
+ Removing stm32f4xx_hal_wwdg.o(i.HAL_WWDG_MspInit), (2 bytes).
+ Removing stm32f4xx_hal_wwdg.o(i.HAL_WWDG_Refresh), (10 bytes).
+ Removing stm32f4xx_ll_fmc.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_ll_fmc.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_ll_fmc.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_ll_fsmc.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_ll_fsmc.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_ll_fsmc.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_DataConfig), (36 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_GetCommandResponse), (6 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_GetDataCounter), (4 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_GetFIFOCount), (6 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_GetPowerState), (8 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_GetResponse), (20 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_Init), (44 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_PowerState_OFF), (8 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_PowerState_ON), (8 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_ReadFIFO), (6 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_SendCommand), (32 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_SetSDIOReadWaitMode), (12 bytes).
+ Removing stm32f4xx_ll_sdmmc.o(i.SDIO_WriteFIFO), (10 bytes).
+ Removing stm32f4xx_ll_usb.o(.rev16_text), (4 bytes).
+ Removing stm32f4xx_ll_usb.o(.revsh_text), (4 bytes).
+ Removing stm32f4xx_ll_usb.o(.rrx_text), (6 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ActivateDedicatedEndpoint), (244 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ActivateEndpoint), (144 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ActivateSetup), (52 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ClearInterrupts), (8 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_CoreInit), (180 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_DeactivateDedicatedEndpoint), (82 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_DeactivateEndpoint), (124 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_DevConnect), (24 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_DevDisconnect), (24 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_DevInit), (372 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_DisableGlobalInt), (12 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_DoPing), (72 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_DriveVbus), (54 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_EP0StartXfer), (344 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_EP0_OutStart), (62 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_EPClearStall), (100 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_EPSetStall), (100 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_EPStartXfer), (628 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_EnableGlobalInt), (12 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_FlushRxFifo), (36 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_FlushTxFifo), (40 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_GetCurrentFrame), (8 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_GetDevSpeed), (58 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_GetHostSpeed), (16 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_GetMode), (8 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_HC_Halt), (340 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_HC_Init), (230 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_HC_ReadInterrupt), (10 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_HC_StartXfer), (520 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_HostInit), (284 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_InitFSLSPClkSel), (54 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ReadDevAllInEpInterrupt), (14 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ReadDevAllOutEpInterrupt), (14 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ReadDevInEPInterrupt), (30 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ReadDevOutEPInterrupt), (16 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ReadInterrupts), (8 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ReadPacket), (58 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_ResetPort), (42 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_SetCurrentMode), (46 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_SetDevAddress), (34 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_SetDevSpeed), (14 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_StopDevice), (116 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_StopHost), (232 bytes).
+ Removing stm32f4xx_ll_usb.o(i.USB_WritePacket), (66 bytes).
+ Removing stm32f4xx_ll_usb.o(.data), (4 bytes).
+ Removing us_ticker.o(.rev16_text), (4 bytes).
+ Removing us_ticker.o(.revsh_text), (4 bytes).
+ Removing us_ticker.o(.rrx_text), (6 bytes).
+ Removing sys.o(.ARM.exidx), (8 bytes).
+ Removing analogin.o(.rev16_text), (4 bytes).
+ Removing analogin.o(.revsh_text), (4 bytes).
+ Removing analogin.o(.rrx_text), (6 bytes).
+ Removing analogin.o(.data), (8 bytes).
+ Removing busin.o(.rev16_text), (4 bytes).
+ Removing busin.o(.revsh_text), (4 bytes).
+ Removing busin.o(.rrx_text), (6 bytes).
+ Removing busin.o(i._ZN4mbed5BusIn4lockEv), (2 bytes).
+ Removing busin.o(i._ZN4mbed5BusIn4modeE7PinMode), (62 bytes).
+ Removing busin.o(i._ZN4mbed5BusIn4readEv), (176 bytes).
+ Removing busin.o(i._ZN4mbed5BusIn6unlockEv), (2 bytes).
+ Removing busin.o(i._ZN4mbed5BusInC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_), (216 bytes).
+ Removing busin.o(i._ZN4mbed5BusInC1EP7PinName), (116 bytes).
+ Removing busin.o(i._ZN4mbed5BusInD0Ev), (48 bytes).
+ Removing busin.o(i._ZN4mbed5BusInD1Ev), (40 bytes).
+ Removing busin.o(i._ZN4mbed5BusIncviEv), (92 bytes).
+ Removing busin.o(i._ZN4mbed5BusInixEi), (112 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing busin.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.rev16_text), (4 bytes).
+ Removing businout.o(.revsh_text), (4 bytes).
+ Removing businout.o(.rrx_text), (6 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOut4lockEv), (2 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOut4modeE7PinMode), (62 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOut4readEv), (92 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOut5inputEv), (58 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOut5writeEi), (180 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOut6outputEv), (58 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOut6unlockEv), (2 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_), (216 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOutC1EP7PinName), (116 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOutD0Ev), (48 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOutD1Ev), (40 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOutaSERS0_), (180 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOutaSEi), (100 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOutcviEv), (92 bytes).
+ Removing businout.o(i._ZN4mbed8BusInOutixEi), (116 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing businout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.rev16_text), (4 bytes).
+ Removing busout.o(.revsh_text), (4 bytes).
+ Removing busout.o(.rrx_text), (6 bytes).
+ Removing busout.o(i._ZN4mbed6BusOut4lockEv), (2 bytes).
+ Removing busout.o(i._ZN4mbed6BusOut4readEv), (92 bytes).
+ Removing busout.o(i._ZN4mbed6BusOut5writeEi), (180 bytes).
+ Removing busout.o(i._ZN4mbed6BusOut6unlockEv), (2 bytes).
+ Removing busout.o(i._ZN4mbed6BusOutC1E7PinNameS1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_S1_), (216 bytes).
+ Removing busout.o(i._ZN4mbed6BusOutC1EP7PinName), (116 bytes).
+ Removing busout.o(i._ZN4mbed6BusOutD0Ev), (48 bytes).
+ Removing busout.o(i._ZN4mbed6BusOutD1Ev), (40 bytes).
+ Removing busout.o(i._ZN4mbed6BusOutaSERS0_), (180 bytes).
+ Removing busout.o(i._ZN4mbed6BusOutaSEi), (100 bytes).
+ Removing busout.o(i._ZN4mbed6BusOutcviEv), (92 bytes).
+ Removing busout.o(i._ZN4mbed6BusOutixEi), (112 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing busout.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.rev16_text), (4 bytes).
+ Removing callchain.o(.revsh_text), (4 bytes).
+ Removing callchain.o(.rrx_text), (6 bytes).
+ Removing callchain.o(i._ZN4mbed9CallChain3addENS_8CallbackIFvvEEE), (56 bytes).
+ Removing callchain.o(i._ZN4mbed9CallChain4callEv), (30 bytes).
+ Removing callchain.o(i._ZN4mbed9CallChain5clearEv), (28 bytes).
+ Removing callchain.o(i._ZN4mbed9CallChain6removeEPNS_8CallbackIFvvEEE), (28 bytes).
+ Removing callchain.o(i._ZN4mbed9CallChain9add_frontENS_8CallbackIFvvEEE), (40 bytes).
+ Removing callchain.o(i._ZN4mbed9CallChainC1Ei), (16 bytes).
+ Removing callchain.o(i._ZN4mbed9CallChainD0Ev), (40 bytes).
+ Removing callchain.o(i._ZN4mbed9CallChainD1Ev), (36 bytes).
+ Removing callchain.o(i._ZNK4mbed9CallChain3getEi), (26 bytes).
+ Removing callchain.o(i._ZNK4mbed9CallChain4findEPNS_8CallbackIFvvEEE), (26 bytes).
+ Removing callchain.o(i._ZNK4mbed9CallChain4sizeEv), (20 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing callchain.o(.ARM.exidx), (8 bytes).
+ Removing can.o(.rev16_text), (4 bytes).
+ Removing can.o(.revsh_text), (4 bytes).
+ Removing can.o(.rrx_text), (6 bytes).
+ Removing ethernet.o(.rev16_text), (4 bytes).
+ Removing ethernet.o(.revsh_text), (4 bytes).
+ Removing ethernet.o(.rrx_text), (6 bytes).
+ Removing filebase.o(.rev16_text), (4 bytes).
+ Removing filebase.o(.revsh_text), (4 bytes).
+ Removing filebase.o(.rrx_text), (6 bytes).
+ Removing filebase.o(i._ZN4mbed8FileBase3getEi), (88 bytes).
+ Removing filebase.o(i._ZN4mbed8FileBase7getNameEv), (4 bytes).
+ Removing filebase.o(i._ZN4mbed8FileBaseD0Ev), (80 bytes).
+ Removing filebase.o(.ARM.exidx), (8 bytes).
+ Removing filebase.o(.ARM.exidx), (8 bytes).
+ Removing filebase.o(.ARM.exidx), (8 bytes).
+ Removing filebase.o(.ARM.exidx), (8 bytes).
+ Removing filebase.o(.ARM.exidx), (8 bytes).
+ Removing filebase.o(.ARM.exidx), (8 bytes).
+ Removing filebase.o(.ARM.exidx), (8 bytes).
+ Removing filelike.o(.rev16_text), (4 bytes).
+ Removing filelike.o(.revsh_text), (4 bytes).
+ Removing filelike.o(.rrx_text), (6 bytes).
+ Removing filelike.o(i._ZN4mbed8FileLikeD0Ev), (22 bytes).
+ Removing filelike.o(i._ZThn4_N4mbed8FileLikeD0Ev), (20 bytes).
+ Removing filelike.o(i._ZThn4_N4mbed8FileLikeD1Ev), (16 bytes).
+ Removing filelike.o(.ARM.exidx), (8 bytes).
+ Removing filelike.o(.ARM.exidx), (8 bytes).
+ Removing filelike.o(.ARM.exidx), (8 bytes).
+ Removing filelike.o(.ARM.exidx), (8 bytes).
+ Removing filelike.o(.ARM.exidx), (8 bytes).
+ Removing filepath.o(.rev16_text), (4 bytes).
+ Removing filepath.o(.revsh_text), (4 bytes).
+ Removing filepath.o(.rrx_text), (6 bytes).
+ Removing filepath.o(i._ZN4mbed8FilePath12isFileSystemEv), (22 bytes).
+ Removing filepath.o(.ARM.exidx), (8 bytes).
+ Removing filepath.o(.ARM.exidx), (8 bytes).
+ Removing filepath.o(.ARM.exidx), (8 bytes).
+ Removing filepath.o(.ARM.exidx), (8 bytes).
+ Removing filepath.o(.ARM.exidx), (8 bytes).
+ Removing filepath.o(.ARM.exidx), (8 bytes).
+ Removing filepath.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(.rev16_text), (4 bytes).
+ Removing filesystemlike.o(.revsh_text), (4 bytes).
+ Removing filesystemlike.o(.rrx_text), (6 bytes).
+ Removing filesystemlike.o(i._ZN4mbed14FileSystemLike7opendirEv), (48 bytes).
+ Removing filesystemlike.o(i._ZN4mbed14FileSystemLikeC2EPKc), (20 bytes).
+ Removing filesystemlike.o(i._ZN4mbed14FileSystemLikeD0Ev), (14 bytes).
+ Removing filesystemlike.o(i._ZN4mbed14FileSystemLikeD2Ev), (4 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.rev16_text), (4 bytes).
+ Removing i2c.o(.revsh_text), (4 bytes).
+ Removing i2c.o(.rrx_text), (6 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C4lockEv), (44 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C4readEi), (50 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C4readEiPcib), (108 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C4stopEv), (30 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C5startEv), (30 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C5writeEi), (36 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C5writeEiPKcib), (108 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C6aquireEv), (48 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C6unlockEv), (44 bytes).
+ Removing i2c.o(i._ZN4mbed3I2C9frequencyEi), (44 bytes).
+ Removing i2c.o(i._ZN4mbed3I2CC1E7PinNameS1_), (44 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.data), (12 bytes).
+ Removing i2cslave.o(.rev16_text), (4 bytes).
+ Removing i2cslave.o(.revsh_text), (4 bytes).
+ Removing i2cslave.o(.rrx_text), (6 bytes).
+ Removing i2cslave.o(i._ZN4mbed8I2CSlave4readEPci), (18 bytes).
+ Removing i2cslave.o(i._ZN4mbed8I2CSlave4readEv), (6 bytes).
+ Removing i2cslave.o(i._ZN4mbed8I2CSlave4stopEv), (4 bytes).
+ Removing i2cslave.o(i._ZN4mbed8I2CSlave5writeEPKci), (18 bytes).
+ Removing i2cslave.o(i._ZN4mbed8I2CSlave5writeEi), (4 bytes).
+ Removing i2cslave.o(i._ZN4mbed8I2CSlave7addressEi), (14 bytes).
+ Removing i2cslave.o(i._ZN4mbed8I2CSlave7receiveEv), (4 bytes).
+ Removing i2cslave.o(i._ZN4mbed8I2CSlave9frequencyEi), (4 bytes).
+ Removing i2cslave.o(i._ZN4mbed8I2CSlaveC1E7PinNameS1_), (40 bytes).
+ Removing i2cslave.o(.ARM.exidx), (8 bytes).
+ Removing i2cslave.o(.ARM.exidx), (8 bytes).
+ Removing i2cslave.o(.ARM.exidx), (8 bytes).
+ Removing i2cslave.o(.ARM.exidx), (8 bytes).
+ Removing i2cslave.o(.ARM.exidx), (8 bytes).
+ Removing i2cslave.o(.ARM.exidx), (8 bytes).
+ Removing i2cslave.o(.ARM.exidx), (8 bytes).
+ Removing i2cslave.o(.ARM.exidx), (8 bytes).
+ Removing i2cslave.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.rev16_text), (4 bytes).
+ Removing interruptin.o(.revsh_text), (4 bytes).
+ Removing interruptin.o(.rrx_text), (6 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptIn10enable_irqEv), (24 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptIn11disable_irqEv), (24 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptIn12_irq_handlerEj14gpio_irq_event), (44 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptIn4fallENS_8CallbackIFvvEEE), (74 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptIn4modeE7PinMode), (26 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptIn4readEv), (128 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptIn4riseENS_8CallbackIFvvEEE), (74 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptInC1E7PinName), (68 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptInD0Ev), (32 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptInD1Ev), (24 bytes).
+ Removing interruptin.o(i._ZN4mbed11InterruptIncviEv), (44 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptin.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.rev16_text), (4 bytes).
+ Removing interruptmanager.o(.revsh_text), (4 bytes).
+ Removing interruptmanager.o(.rrx_text), (6 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager10add_commonEPFvvE9IRQn_Typeb), (160 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager10irq_helperEv), (12 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager13get_irq_indexE9IRQn_Type), (6 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager14remove_handlerEPNS_8CallbackIFvvEEE9IRQn_Type), (26 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager17static_irq_helperEv), (104 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager19must_replace_vectorE9IRQn_Type), (80 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager3getEv), (84 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager4lockEv), (2 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager6unlockEv), (2 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManager7destroyEv), (52 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManagerC1Ev), (16 bytes).
+ Removing interruptmanager.o(i._ZN4mbed16InterruptManagerD1Ev), (30 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing interruptmanager.o(.data), (4 bytes).
+ Removing localfilesystem.o(.rev16_text), (4 bytes).
+ Removing localfilesystem.o(.revsh_text), (4 bytes).
+ Removing localfilesystem.o(.rrx_text), (6 bytes).
+ Removing mbed_alloc_wrappers.o(i.mbed_stats_heap_get), (14 bytes).
+ Removing mbed_alloc_wrappers.o(.ARM.exidx), (8 bytes).
+ Removing mbed_assert.o(.rev16_text), (4 bytes).
+ Removing mbed_assert.o(.revsh_text), (4 bytes).
+ Removing mbed_assert.o(.rrx_text), (6 bytes).
+ Removing mbed_board.o(.rev16_text), (4 bytes).
+ Removing mbed_board.o(.revsh_text), (4 bytes).
+ Removing mbed_board.o(.rrx_text), (6 bytes).
+ Removing mbed_critical.o(.rev16_text), (4 bytes).
+ Removing mbed_critical.o(.revsh_text), (4 bytes).
+ Removing mbed_critical.o(.rrx_text), (6 bytes).
+ Removing mbed_critical.o(i.core_util_are_interrupts_enabled), (12 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_cas_ptr), (36 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_cas_u16), (36 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_cas_u32), (36 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_cas_u8), (36 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_decr_ptr), (18 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_decr_u16), (20 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_decr_u32), (18 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_decr_u8), (20 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_incr_ptr), (18 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_incr_u16), (20 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_incr_u32), (18 bytes).
+ Removing mbed_critical.o(i.core_util_atomic_incr_u8), (20 bytes).
+ Removing mbed_error.o(.rev16_text), (4 bytes).
+ Removing mbed_error.o(.revsh_text), (4 bytes).
+ Removing mbed_error.o(.rrx_text), (6 bytes).
+ Removing mbed_gpio.o(.rev16_text), (4 bytes).
+ Removing mbed_gpio.o(.revsh_text), (4 bytes).
+ Removing mbed_gpio.o(.rrx_text), (6 bytes).
+ Removing mbed_gpio.o(i.gpio_init_in), (40 bytes).
+ Removing mbed_gpio.o(i.gpio_init_in_ex), (40 bytes).
+ Removing mbed_gpio.o(i.gpio_init_inout), (168 bytes).
+ Removing mbed_interface.o(.rev16_text), (4 bytes).
+ Removing mbed_interface.o(.revsh_text), (4 bytes).
+ Removing mbed_interface.o(.rrx_text), (6 bytes).
+ Removing mbed_interface.o(i.mbed_mac_address), (22 bytes).
+ Removing mbed_lp_ticker_api.o(.rev16_text), (4 bytes).
+ Removing mbed_lp_ticker_api.o(.revsh_text), (4 bytes).
+ Removing mbed_lp_ticker_api.o(.rrx_text), (6 bytes).
+ Removing mbed_mem_trace.o(i.mbed_mem_trace_calloc), (64 bytes).
+ Removing mbed_mem_trace.o(i.mbed_mem_trace_default_callback), (152 bytes).
+ Removing mbed_mem_trace.o(i.mbed_mem_trace_free), (60 bytes).
+ Removing mbed_mem_trace.o(i.mbed_mem_trace_malloc), (60 bytes).
+ Removing mbed_mem_trace.o(i.mbed_mem_trace_realloc), (64 bytes).
+ Removing mbed_mem_trace.o(i.mbed_mem_trace_set_callback), (12 bytes).
+ Removing mbed_mem_trace.o(.data), (8 bytes).
+ Removing mbed_pinmap_common.o(.rev16_text), (4 bytes).
+ Removing mbed_pinmap_common.o(.revsh_text), (4 bytes).
+ Removing mbed_pinmap_common.o(.rrx_text), (6 bytes).
+ Removing mbed_pinmap_common.o(i.pinmap_find_function), (40 bytes).
+ Removing mbed_pinmap_common.o(i.pinmap_find_peripheral), (40 bytes).
+ Removing mbed_pinmap_common.o(i.pinmap_function), (96 bytes).
+ Removing mbed_rtc_time.o(.rev16_text), (4 bytes).
+ Removing mbed_rtc_time.o(.revsh_text), (4 bytes).
+ Removing mbed_rtc_time.o(.rrx_text), (6 bytes).
+ Removing mbed_rtc_time.o(i.attach_rtc), (108 bytes).
+ Removing mbed_rtc_time.o(i.clock), (84 bytes).
+ Removing mbed_rtc_time.o(i.set_time), (100 bytes).
+ Removing mbed_rtc_time.o(i.time), (188 bytes).
+ Removing mbed_rtc_time.o(.ARM.exidx), (8 bytes).
+ Removing mbed_rtc_time.o(.ARM.exidx), (8 bytes).
+ Removing mbed_rtc_time.o(.ARM.exidx), (8 bytes).
+ Removing mbed_rtc_time.o(.ARM.exidx), (8 bytes).
+ Removing mbed_rtc_time.o(.data), (24 bytes).
+ Removing mbed_semihost_api.o(.rev16_text), (4 bytes).
+ Removing mbed_semihost_api.o(.revsh_text), (4 bytes).
+ Removing mbed_semihost_api.o(.rrx_text), (6 bytes).
+ Removing mbed_ticker_api.o(.rev16_text), (4 bytes).
+ Removing mbed_ticker_api.o(.revsh_text), (4 bytes).
+ Removing mbed_ticker_api.o(.rrx_text), (6 bytes).
+ Removing mbed_ticker_api.o(i.ticker_get_next_timestamp), (32 bytes).
+ Removing mbed_ticker_api.o(i.ticker_insert_event), (72 bytes).
+ Removing mbed_ticker_api.o(i.ticker_read), (6 bytes).
+ Removing mbed_ticker_api.o(i.ticker_remove_event), (68 bytes).
+ Removing mbed_ticker_api.o(i.ticker_set_handler), (18 bytes).
+ Removing mbed_us_ticker_api.o(.rev16_text), (4 bytes).
+ Removing mbed_us_ticker_api.o(.revsh_text), (4 bytes).
+ Removing mbed_us_ticker_api.o(.rrx_text), (6 bytes).
+ Removing mbed_us_ticker_api.o(i.get_us_ticker_data), (8 bytes).
+ Removing mbed_wait_api.o(.rev16_text), (4 bytes).
+ Removing mbed_wait_api.o(.revsh_text), (4 bytes).
+ Removing mbed_wait_api.o(.rrx_text), (6 bytes).
+ Removing mbed_wait_api.o(i.wait_us), (24 bytes).
+ Removing rawserial.o(.rev16_text), (4 bytes).
+ Removing rawserial.o(.revsh_text), (4 bytes).
+ Removing rawserial.o(.rrx_text), (6 bytes).
+ Removing rawserial.o(i._ZN4mbed9RawSerial4getcEv), (32 bytes).
+ Removing rawserial.o(i._ZN4mbed9RawSerial4lockEv), (2 bytes).
+ Removing rawserial.o(i._ZN4mbed9RawSerial4putcEi), (36 bytes).
+ Removing rawserial.o(i._ZN4mbed9RawSerial4putsEPKc), (64 bytes).
+ Removing rawserial.o(i._ZN4mbed9RawSerial6printfEPKcz), (214 bytes).
+ Removing rawserial.o(i._ZN4mbed9RawSerial6unlockEv), (2 bytes).
+ Removing rawserial.o(i._ZN4mbed9RawSerialC1E7PinNameS1_), (16 bytes).
+ Removing rawserial.o(.ARM.exidx), (8 bytes).
+ Removing rawserial.o(.ARM.exidx), (8 bytes).
+ Removing rawserial.o(.ARM.exidx), (8 bytes).
+ Removing rawserial.o(.ARM.exidx), (8 bytes).
+ Removing rawserial.o(.ARM.exidx), (8 bytes).
+ Removing rawserial.o(.ARM.exidx), (8 bytes).
+ Removing rawserial.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.rev16_text), (4 bytes).
+ Removing retarget.o(.revsh_text), (4 bytes).
+ Removing retarget.o(.rrx_text), (6 bytes).
+ Removing retarget.o(i._ZN4mbed10FileHandleD0Ev), (128 bytes).
+ Removing retarget.o(i._ZN4mbed9mbed_getcEPSt6__FILE), (4 bytes).
+ Removing retarget.o(i._ZN4mbed9mbed_getsEPciPSt6__FILE), (4 bytes).
+ Removing retarget.o(i._ZdaPv), (10 bytes).
+ Removing retarget.o(i._ZdlPv), (10 bytes).
+ Removing retarget.o(i._Znaj), (52 bytes).
+ Removing retarget.o(i._Znwj), (52 bytes).
+ Removing retarget.o(i._sys_command_string), (4 bytes).
+ Removing retarget.o(i._sys_ensure), (40 bytes).
+ Removing retarget.o(i._sys_read), (84 bytes).
+ Removing retarget.o(i.closedir), (6 bytes).
+ Removing retarget.o(i.mbed_sdk_init), (2 bytes).
+ Removing retarget.o(i.mkdir), (56 bytes).
+ Removing retarget.o(i.opendir), (68 bytes).
+ Removing retarget.o(i.readdir), (6 bytes).
+ Removing retarget.o(i.remove), (52 bytes).
+ Removing retarget.o(i.rename), (80 bytes).
+ Removing retarget.o(i.rewinddir), (6 bytes).
+ Removing retarget.o(i.seekdir), (6 bytes).
+ Removing retarget.o(i.telldir), (6 bytes).
+ Removing retarget.o(i.tmpfile), (4 bytes).
+ Removing retarget.o(i.tmpnam), (4 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.ARM.exidx), (8 bytes).
+ Removing retarget.o(.data), (4 bytes).
+ Removing retarget.o(.data), (4 bytes).
+ Removing serial.o(.rev16_text), (4 bytes).
+ Removing serial.o(.revsh_text), (4 bytes).
+ Removing serial.o(.rrx_text), (6 bytes).
+ Removing serial.o(i._ZN4mbed6Serial5_getcEv), (4 bytes).
+ Removing serial.o(i._ZN4mbed6Serial5_putcEi), (4 bytes).
+ Removing serial.o(i._ZThn184_N4mbed6Serial5_getcEv), (6 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.rev16_text), (4 bytes).
+ Removing serialbase.o(.revsh_text), (4 bytes).
+ Removing serialbase.o(.rrx_text), (6 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase10_base_getcEv), (6 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase10abort_readEv), (6 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase10send_breakEv), (60 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase10start_readEPvicRKNS_8CallbackIFviEEEih), (76 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase11abort_writeEv), (6 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase11start_writeEPKvicRKNS_8CallbackIFviEEEi), (64 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase16set_dma_usage_rxE8DMAUsage), (28 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase16set_dma_usage_txE8DMAUsage), (28 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase16set_flow_controlENS0_4FlowE7PinNameS2_), (94 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase4readEPhiRKNS_8CallbackIFviEEEih), (112 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase4readEPtiRKNS_8CallbackIFviEEEih), (112 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase5writeEPKhiRKNS_8CallbackIFviEEEi), (108 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase5writeEPKtiRKNS_8CallbackIFviEEEi), (108 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase6attachENS_8CallbackIFvvEEENS0_7IrqTypeE), (88 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase6formatEiNS0_6ParityEi), (48 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase8readableEv), (34 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBase9writeableEv), (34 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(.rev16_text), (4 bytes).
+ Removing spi.o(.revsh_text), (4 bytes).
+ Removing spi.o(.rrx_text), (6 bytes).
+ Removing spi.o(i._ZN4mbed3SPI4lockEv), (44 bytes).
+ Removing spi.o(i._ZN4mbed3SPI5writeEi), (88 bytes).
+ Removing spi.o(i._ZN4mbed3SPI6aquireEv), (60 bytes).
+ Removing spi.o(i._ZN4mbed3SPI6formatEii), (88 bytes).
+ Removing spi.o(i._ZN4mbed3SPI6unlockEv), (44 bytes).
+ Removing spi.o(i._ZN4mbed3SPI9frequencyEi), (84 bytes).
+ Removing spi.o(i._ZN4mbed3SPIC1E7PinNameS1_S1_S1_), (116 bytes).
+ Removing spi.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(.data), (12 bytes).
+ Removing spislave.o(.rev16_text), (4 bytes).
+ Removing spislave.o(.revsh_text), (4 bytes).
+ Removing spislave.o(.rrx_text), (6 bytes).
+ Removing spislave.o(i._ZN4mbed8SPISlave4readEv), (4 bytes).
+ Removing spislave.o(i._ZN4mbed8SPISlave5replyEi), (4 bytes).
+ Removing spislave.o(i._ZN4mbed8SPISlave6formatEii), (10 bytes).
+ Removing spislave.o(i._ZN4mbed8SPISlave7receiveEv), (4 bytes).
+ Removing spislave.o(i._ZN4mbed8SPISlave9frequencyEi), (6 bytes).
+ Removing spislave.o(i._ZN4mbed8SPISlaveC1E7PinNameS1_S1_S1_), (76 bytes).
+ Removing spislave.o(.ARM.exidx), (8 bytes).
+ Removing spislave.o(.ARM.exidx), (8 bytes).
+ Removing spislave.o(.ARM.exidx), (8 bytes).
+ Removing spislave.o(.ARM.exidx), (8 bytes).
+ Removing spislave.o(.ARM.exidx), (8 bytes).
+ Removing spislave.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.rev16_text), (4 bytes).
+ Removing stream.o(.revsh_text), (4 bytes).
+ Removing stream.o(.rrx_text), (6 bytes).
+ Removing stream.o(i._ZN4mbed6Stream4getcEv), (38 bytes).
+ Removing stream.o(i._ZN4mbed6Stream4getsEPci), (46 bytes).
+ Removing stream.o(i._ZN4mbed6Stream4putcEi), (42 bytes).
+ Removing stream.o(i._ZN4mbed6Stream4putsEPKc), (42 bytes).
+ Removing stream.o(i._ZN4mbed6Stream4readEPvj), (60 bytes).
+ Removing stream.o(i._ZN4mbed6Stream5fsyncEv), (4 bytes).
+ Removing stream.o(i._ZN4mbed6Stream5scanfEPKcz), (50 bytes).
+ Removing stream.o(i._ZN4mbed6Stream6vscanfEPKcSt9__va_list), (46 bytes).
+ Removing stream.o(i._ZN4mbed6Stream7vprintfEPKcSt9__va_list), (46 bytes).
+ Removing stream.o(i._ZN4mbed6StreamD0Ev), (36 bytes).
+ Removing stream.o(i._ZThn4_N4mbed6StreamD0Ev), (36 bytes).
+ Removing stream.o(i._ZThn4_N4mbed6StreamD1Ev), (32 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing stream.o(.ARM.exidx), (8 bytes).
+ Removing ticker.o(.rev16_text), (4 bytes).
+ Removing ticker.o(.revsh_text), (4 bytes).
+ Removing ticker.o(.rrx_text), (6 bytes).
+ Removing ticker.o(i._ZN4mbed6Ticker5setupEj), (42 bytes).
+ Removing ticker.o(i._ZN4mbed6Ticker6detachEv), (28 bytes).
+ Removing ticker.o(i._ZN4mbed6Ticker7handlerEv), (36 bytes).
+ Removing ticker.o(.ARM.exidx), (8 bytes).
+ Removing ticker.o(.ARM.exidx), (8 bytes).
+ Removing ticker.o(.ARM.exidx), (8 bytes).
+ Removing timeout.o(.rev16_text), (4 bytes).
+ Removing timeout.o(.revsh_text), (4 bytes).
+ Removing timeout.o(.rrx_text), (6 bytes).
+ Removing timeout.o(i._ZN4mbed7Timeout7handlerEv), (16 bytes).
+ Removing timeout.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.rev16_text), (4 bytes).
+ Removing timer.o(.revsh_text), (4 bytes).
+ Removing timer.o(.rrx_text), (6 bytes).
+ Removing timer.o(i._ZN4mbed5Timer4readEv), (64 bytes).
+ Removing timer.o(i._ZN4mbed5Timer4stopEv), (50 bytes).
+ Removing timer.o(i._ZN4mbed5Timer5resetEv), (28 bytes).
+ Removing timer.o(i._ZN4mbed5Timer5startEv), (32 bytes).
+ Removing timer.o(i._ZN4mbed5Timer7read_msEv), (50 bytes).
+ Removing timer.o(i._ZN4mbed5Timer7read_usEv), (44 bytes).
+ Removing timer.o(i._ZN4mbed5Timer9slicetimeEv), (32 bytes).
+ Removing timer.o(i._ZN4mbed5TimerC1EPK13ticker_data_t), (36 bytes).
+ Removing timer.o(i._ZN4mbed5TimerC1Ev), (40 bytes).
+ Removing timer.o(i._ZN4mbed5TimercvfEv), (64 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timer.o(.ARM.exidx), (8 bytes).
+ Removing timerevent.o(.rev16_text), (4 bytes).
+ Removing timerevent.o(.revsh_text), (4 bytes).
+ Removing timerevent.o(.rrx_text), (6 bytes).
+ Removing timerevent.o(i._ZN4mbed10TimerEvent3irqEj), (6 bytes).
+ Removing timerevent.o(i._ZN4mbed10TimerEvent6insertEj), (16 bytes).
+ Removing timerevent.o(i._ZN4mbed10TimerEvent6removeEv), (10 bytes).
+ Removing timerevent.o(i._ZN4mbed10TimerEventC2EPK13ticker_data_t), (40 bytes).
+ Removing timerevent.o(i._ZN4mbed10TimerEventC2Ev), (40 bytes).
+ Removing timerevent.o(i._ZN4mbed10TimerEventD0Ev), (32 bytes).
+ Removing timerevent.o(i._ZN4mbed10TimerEventD2Ev), (24 bytes).
+ Removing timerevent.o(.ARM.exidx), (8 bytes).
+ Removing timerevent.o(.ARM.exidx), (8 bytes).
+ Removing timerevent.o(.ARM.exidx), (8 bytes).
+ Removing timerevent.o(.ARM.exidx), (8 bytes).
+ Removing timerevent.o(.ARM.exidx), (8 bytes).
+ Removing timerevent.o(.ARM.exidx), (8 bytes).
+ Removing timerevent.o(.ARM.exidx), (8 bytes).
+ Removing main.o(.rev16_text), (4 bytes).
+ Removing main.o(.revsh_text), (4 bytes).
+ Removing main.o(.rrx_text), (6 bytes).
+ Removing main.o(.ARM.exidx), (8 bytes).
+ Removing main.o(.ARM.exidx), (8 bytes).
+ Removing i2c_api.o(i.i2c_start), (92 bytes).
+ Removing i2c_api.o(i.i2c_stop), (14 bytes).
+ Removing busin.o(.constdata__ZTVN4mbed5BusInE), (24 bytes).
+ Removing busin.o(.constdata__ZTIN4mbed5BusInE), (8 bytes).
+ Removing busin.o(.constdata__ZTSN4mbed5BusInE), (14 bytes).
+ Removing businout.o(.constdata__ZTVN4mbed8BusInOutE), (24 bytes).
+ Removing businout.o(.constdata__ZTIN4mbed8BusInOutE), (8 bytes).
+ Removing businout.o(.constdata__ZTSN4mbed8BusInOutE), (17 bytes).
+ Removing busout.o(.constdata__ZTVN4mbed6BusOutE), (24 bytes).
+ Removing busout.o(.constdata__ZTIN4mbed6BusOutE), (8 bytes).
+ Removing busout.o(.constdata__ZTSN4mbed6BusOutE), (15 bytes).
+ Removing callchain.o(.constdata__ZTVN4mbed9CallChainE), (16 bytes).
+ Removing callchain.o(.constdata__ZTIN4mbed9CallChainE), (8 bytes).
+ Removing callchain.o(.constdata__ZTSN4mbed9CallChainE), (18 bytes).
+ Removing filebase.o(.ARM.exidx), (8 bytes).
+ Removing filebase.o(.constdata__ZTIN4mbed8FileBaseE), (8 bytes).
+ Removing filebase.o(.constdata__ZTSN4mbed8FileBaseE), (17 bytes).
+ Removing filelike.o(.ARM.exidx), (8 bytes).
+ Removing filelike.o(.ARM.exidx), (8 bytes).
+ Removing filelike.o(.ARM.exidx), (8 bytes).
+ Removing filelike.o(.constdata__ZTIN4mbed8FileLikeE), (32 bytes).
+ Removing filelike.o(.constdata__ZTSN4mbed8FileLikeE), (17 bytes).
+ Removing filesystemlike.o(.constdata__ZTVN4mbed14FileSystemLikeE), (36 bytes).
+ Removing filesystemlike.o(i._ZN4mbed14FileSystemLike6removeEPKc), (6 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed14FileSystemLike6renameEPKcS2_), (6 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed14FileSystemLike7opendirEPKc), (4 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed14FileSystemLike5mkdirEPKci), (6 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(.constdata__ZTVN4mbed13BaseDirHandleE), (44 bytes).
+ Removing filesystemlike.o(.constdata__ZTIN4mbed14FileSystemLikeE), (12 bytes).
+ Removing filesystemlike.o(.constdata__ZTIN4mbed13BaseDirHandleE), (12 bytes).
+ Removing filesystemlike.o(.constdata__ZTSN4mbed14FileSystemLikeE), (24 bytes).
+ Removing filesystemlike.o(.constdata__ZTIN4mbed9DirHandleE), (8 bytes).
+ Removing filesystemlike.o(.constdata__ZTSN4mbed13BaseDirHandleE), (23 bytes).
+ Removing filesystemlike.o(.constdata__ZTSN4mbed9DirHandleE), (18 bytes).
+ Removing filesystemlike.o(i._ZN4mbed13BaseDirHandle8closedirEv), (12 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed13BaseDirHandle7readdirEv), (68 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed13BaseDirHandle7telldirEv), (26 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed13BaseDirHandle7seekdirEl), (28 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed13BaseDirHandle9rewinddirEv), (28 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed13BaseDirHandle4lockEv), (2 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed13BaseDirHandle6unlockEv), (2 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed13BaseDirHandleD1Ev), (12 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing filesystemlike.o(i._ZN4mbed13BaseDirHandleD0Ev), (12 bytes).
+ Removing filesystemlike.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.constdata__ZTVN4mbed3I2CE), (24 bytes).
+ Removing i2c.o(i._ZN4mbed3I2CD1Ev), (2 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(i._ZN4mbed3I2CD0Ev), (4 bytes).
+ Removing i2c.o(.ARM.exidx), (8 bytes).
+ Removing i2c.o(.constdata__ZTIN4mbed3I2CE), (8 bytes).
+ Removing i2c.o(.constdata__ZTSN4mbed3I2CE), (12 bytes).
+ Removing interruptin.o(.constdata__ZTVN4mbed11InterruptInE), (16 bytes).
+ Removing interruptin.o(.constdata__ZTIN4mbed11InterruptInE), (8 bytes).
+ Removing interruptin.o(.constdata__ZTSN4mbed11InterruptInE), (21 bytes).
+ Removing interruptmanager.o(t._ZN4mbed8CallbackIFvvEE12_staticthunkEPvS3_), (4 bytes).
+ Removing interruptmanager.o(.ARM.exidx), (8 bytes).
+ Removing rawserial.o(.constdata__ZTVN4mbed9RawSerialE), (24 bytes).
+ Removing rawserial.o(i._ZN4mbed9RawSerialD1Ev), (12 bytes).
+ Removing rawserial.o(.ARM.exidx), (8 bytes).
+ Removing rawserial.o(i._ZN4mbed9RawSerialD0Ev), (12 bytes).
+ Removing rawserial.o(.ARM.exidx), (8 bytes).
+ Removing rawserial.o(.constdata__ZTIN4mbed9RawSerialE), (12 bytes).
+ Removing rawserial.o(.constdata__ZTSN4mbed9RawSerialE), (18 bytes).
+ Removing retarget.o(.constdata__ZTIN4mbed10FileHandleE), (8 bytes).
+ Removing retarget.o(.constdata__ZTSN4mbed10FileHandleE), (20 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(i._ZN4mbed6SerialD0Ev), (44 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(i._ZThn188_N4mbed6SerialD0Ev), (44 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(i._ZThn184_N4mbed6SerialD0Ev), (44 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(i._ZThn188_N4mbed6SerialD1Ev), (40 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(i._ZThn184_N4mbed6SerialD1Ev), (36 bytes).
+ Removing serial.o(.ARM.exidx), (8 bytes).
+ Removing serial.o(.constdata__ZTIN4mbed6SerialE), (32 bytes).
+ Removing serial.o(.constdata__ZTSN4mbed6SerialE), (15 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBaseD1Ev), (12 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(i._ZN4mbed10SerialBaseD0Ev), (12 bytes).
+ Removing serialbase.o(.ARM.exidx), (8 bytes).
+ Removing serialbase.o(.constdata__ZTIN4mbed10SerialBaseE), (8 bytes).
+ Removing serialbase.o(.constdata__ZTSN4mbed10SerialBaseE), (20 bytes).
+ Removing spi.o(.constdata__ZTVN4mbed3SPIE), (28 bytes).
+ Removing spi.o(i._ZN4mbed3SPID1Ev), (2 bytes).
+ Removing spi.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(i._ZN4mbed3SPID0Ev), (4 bytes).
+ Removing spi.o(.ARM.exidx), (8 bytes).
+ Removing spi.o(.constdata__ZTIN4mbed3SPIE), (8 bytes).
+ Removing spi.o(.constdata__ZTSN4mbed3SPIE), (12 bytes).
+ Removing stream.o(.constdata__ZTIN4mbed6StreamE), (12 bytes).
+ Removing stream.o(.constdata__ZTSN4mbed6StreamE), (15 bytes).
+ Removing ticker.o(.constdata__ZTVN4mbed6TickerE), (20 bytes).
+ Removing ticker.o(i._ZN4mbed6TickerD1Ev), (44 bytes).
+ Removing ticker.o(.ARM.exidx), (8 bytes).
+ Removing ticker.o(i._ZN4mbed6TickerD0Ev), (48 bytes).
+ Removing ticker.o(.ARM.exidx), (8 bytes).
+ Removing ticker.o(.constdata__ZTIN4mbed6TickerE), (12 bytes).
+ Removing ticker.o(.constdata__ZTSN4mbed6TickerE), (15 bytes).
+ Removing timeout.o(.constdata__ZTVN4mbed7TimeoutE), (20 bytes).
+ Removing timeout.o(i._ZN4mbed7TimeoutD1Ev), (28 bytes).
+ Removing timeout.o(.ARM.exidx), (8 bytes).
+ Removing timeout.o(i._ZN4mbed7TimeoutD0Ev), (32 bytes).
+ Removing timeout.o(.ARM.exidx), (8 bytes).
+ Removing timeout.o(.constdata__ZTIN4mbed7TimeoutE), (12 bytes).
+ Removing timeout.o(.constdata__ZTSN4mbed7TimeoutE), (16 bytes).
+ Removing timerevent.o(.constdata__ZTVN4mbed10TimerEventE), (20 bytes).
+ Removing timerevent.o(.constdata__ZTIN4mbed10TimerEventE), (8 bytes).
+ Removing timerevent.o(.constdata__ZTSN4mbed10TimerEventE), (20 bytes).
+
+1869 unused section(s) (total 113901 bytes) removed from the image.
+
+==============================================================================
+
+Image Symbol Table
+
+ Local Symbols
+
+ Symbol Name Value Ov Type Size Object(Section)
+
+ ../../../clib/unwind_pr.c 0x00000000 Number 0 unwind_pr0.o ABSOLUTE
+ ../../../clib/unwind_pr.c 0x00000000 Number 0 unwind_prcommon.o ABSOLUTE
+ ../../../clib/unwinder.c 0x00000000 Number 0 unwinder.o ABSOLUTE
+ ../../../clib/unwinder.c 0x00000000 Number 0 unwinder.o ABSOLUTE
+ ../../../clib/unwinder.c 0x00000000 Number 0 unwind_activity.o ABSOLUTE
+ ../../../clib/unwinder.c 0x00000000 Number 0 unwind_activity.o ABSOLUTE
+ ../../../edgfe/lib_src/arm_exceptions.c 0x00000000 Number 0 arm_exceptions_globs.o ABSOLUTE
+ ../../../edgfe/lib_src/arm_exceptions.c 0x00000000 Number 0 arm_exceptions_callterm.o ABSOLUTE
+ ../../../edgfe/lib_src/arm_exceptions.c 0x00000000 Number 0 arm_exceptions_support.o ABSOLUTE
+ ../../../edgfe/lib_src/arm_exceptions.c 0x00000000 Number 0 arm_exceptions_terminate.o ABSOLUTE
+ ../../../edgfe/lib_src/arm_exceptions.c 0x00000000 Number 0 arm_exceptions_mem.o ABSOLUTE
+ ../../../edgfe/lib_src/arm_noexceptions.c 0x00000000 Number 0 arm_begincatch_noexceptions.o ABSOLUTE
+ ../../../edgfe/lib_src/pure_virt.c 0x00000000 Number 0 pure_virt.o ABSOLUTE
+ ../../../edgfe/lib_src/typeinfo.c 0x00000000 Number 0 type_info_dtor.o ABSOLUTE
+ ../../../edgfe/lib_src/typeinfo.c 0x00000000 Number 0 lib_rtti_impl.o ABSOLUTE
+ ../../array_helpers.cpp 0x00000000 Number 0 aeabi_vec_ctor_nocookie_nodtor.o ABSOLUTE
+ ../clib/angel/boardlib.s 0x00000000 Number 0 boardinit2.o ABSOLUTE
+ ../clib/angel/boardlib.s 0x00000000 Number 0 boardinit1.o ABSOLUTE
+ ../clib/angel/boardlib.s 0x00000000 Number 0 boardinit3.o ABSOLUTE
+ ../clib/angel/handlers.s 0x00000000 Number 0 __scatter_copy.o ABSOLUTE
+ ../clib/angel/handlers.s 0x00000000 Number 0 __scatter_zi.o ABSOLUTE
+ ../clib/angel/kernel.s 0x00000000 Number 0 __rtentry2.o ABSOLUTE
+ ../clib/angel/kernel.s 0x00000000 Number 0 __rtentry4.o ABSOLUTE
+ ../clib/angel/kernel.s 0x00000000 Number 0 __rtentry.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_ddtor_pointer_addr.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_heap_descriptor_intlibspace.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_errno_addr_intlibspace.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_heap_descriptor.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_locale_intlibspace.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_errno_addr.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_ddtor_pointer_addr_intlibspace.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_raise.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_locale.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_eh_globals_addr_intlibspace.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_eh_globals_addr.o ABSOLUTE
+ ../clib/angel/rt.s 0x00000000 Number 0 rt_ctype_table.o ABSOLUTE
+ ../clib/angel/scatter.s 0x00000000 Number 0 __scatter.o ABSOLUTE
+ ../clib/angel/startup.s 0x00000000 Number 0 __main.o ABSOLUTE
+ ../clib/angel/sys.s 0x00000000 Number 0 use_no_semi.o ABSOLUTE
+ ../clib/angel/sys.s 0x00000000 Number 0 indicate_semi.o ABSOLUTE
+ ../clib/angel/sys.s 0x00000000 Number 0 libspace.o ABSOLUTE
+ ../clib/angel/sys.s 0x00000000 Number 0 mutex_dummy.o ABSOLUTE
+ ../clib/angel/sysapp.c 0x00000000 Number 0 sys_wrch.o ABSOLUTE
+ ../clib/angel/sysapp.c 0x00000000 Number 0 sys_exit.o ABSOLUTE
+ ../clib/arm_runtime.c 0x00000000 Number 0 init_aeabi.o ABSOLUTE
+ ../clib/arm_runtime.c 0x00000000 Number 0 init_aeabi.o ABSOLUTE
+ ../clib/armsys.c 0x00000000 Number 0 _get_argv_nomalloc.o ABSOLUTE
+ ../clib/armsys.c 0x00000000 Number 0 argv_veneer.o ABSOLUTE
+ ../clib/armsys.c 0x00000000 Number 0 argv_veneer.o ABSOLUTE
+ ../clib/armsys.c 0x00000000 Number 0 no_argv.o ABSOLUTE
+ ../clib/armsys.c 0x00000000 Number 0 _get_argv.o ABSOLUTE
+ ../clib/assert.c 0x00000000 Number 0 assert_stdio.o ABSOLUTE
+ ../clib/bigflt.c 0x00000000 Number 0 bigflt0.o ABSOLUTE
+ ../clib/btod.s 0x00000000 Number 0 btod.o ABSOLUTE
+ ../clib/ctype.c 0x00000000 Number 0 isspace.o ABSOLUTE
+ ../clib/fenv.c 0x00000000 Number 0 _rserrno.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_final_mt.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_final.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_free_mt.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_extend.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_alloc_mt.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_free.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_extend_mt.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_init_mt.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_alloc.o ABSOLUTE
+ ../clib/heap1.c 0x00000000 Number 0 h1_init.o ABSOLUTE
+ ../clib/heap2.c 0x00000000 Number 0 heap2mt.o ABSOLUTE
+ ../clib/heap2.c 0x00000000 Number 0 heap2.o ABSOLUTE
+ ../clib/heap2.c 0x00000000 Number 0 fdtree.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 hrguard.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 maybetermalloc1.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 maybetermalloc2.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 term_alloc.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 maybetermalloc1.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 heapstubs.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 init_alloc.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 malloc.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 maybetermalloc2.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 hguard.o ABSOLUTE
+ ../clib/heapalloc.c 0x00000000 Number 0 free.o ABSOLUTE
+ ../clib/heapaux.c 0x00000000 Number 0 heapauxa.o ABSOLUTE
+ ../clib/heapaux.c 0x00000000 Number 0 heapauxi.o ABSOLUTE
+ ../clib/libinit.s 0x00000000 Number 0 libshutdown2.o ABSOLUTE
+ ../clib/libinit.s 0x00000000 Number 0 libinit.o ABSOLUTE
+ ../clib/libinit.s 0x00000000 Number 0 libinit2.o ABSOLUTE
+ ../clib/locale.c 0x00000000 Number 0 _mbrtowc.o ABSOLUTE
+ ../clib/locale.c 0x00000000 Number 0 _wcrtomb.o ABSOLUTE
+ ../clib/locale.s 0x00000000 Number 0 lc_numeric_c.o ABSOLUTE
+ ../clib/locale.s 0x00000000 Number 0 lc_ctype_c.o ABSOLUTE
+ ../clib/longlong.s 0x00000000 Number 0 llshl.o ABSOLUTE
+ ../clib/longlong.s 0x00000000 Number 0 lludiv10.o ABSOLUTE
+ ../clib/memcpset.s 0x00000000 Number 0 rt_memcpy_w.o ABSOLUTE
+ ../clib/memcpset.s 0x00000000 Number 0 rt_memclr_w.o ABSOLUTE
+ ../clib/memcpset.s 0x00000000 Number 0 strncpy.o ABSOLUTE
+ ../clib/memcpset.s 0x00000000 Number 0 strcmpv7m.o ABSOLUTE
+ ../clib/memcpset.s 0x00000000 Number 0 rt_memclr.o ABSOLUTE
+ ../clib/memcpset.s 0x00000000 Number 0 rt_memcpy_v6.o ABSOLUTE
+ ../clib/misc.s 0x00000000 Number 0 printf_stubs.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_hex_int.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_hex_ll.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __printf_flags_ss.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_dec.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __printf.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 noretval__2sprintf.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_wchar.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 noretval__2printf.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __printf_wp.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __printf_flags.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __2sprintf.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __2printf.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_intcommon.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_char_common.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 c89vsnprintf.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 c89vsprintf.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __printf_flags_wp.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _sputc.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __printf_ss_wp.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 vsprintf.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _snputc.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_char_file.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __printf_ss.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_fp_dec.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_hex_int_ll_ptr.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_hex_ll_ptr.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_wctomb.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_fp_hex.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_longlong_dec.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_oct_int.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_fp_infnan.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_hex_int_ll.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_oct_int_ll.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __printf_flags_ss_wp.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_charcount.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_oct_ll.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 c89vfprintf.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_hex_int_ptr.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 __printf_nopercent.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_char.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_char_file_locked.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_pad.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_truncate.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_hex_ptr.o ABSOLUTE
+ ../clib/printf.c 0x00000000 Number 0 _printf_str.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_u.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_percent.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_a.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_llx.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_llo.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_ls.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_l.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_ll.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_llu.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_lld.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_lli.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_d.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_e.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_p.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_percent_end.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_lc.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_c.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_s.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_n.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_f.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_g.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_x.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_o.o ABSOLUTE
+ ../clib/printf_percent.s 0x00000000 Number 0 _printf_i.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _scanf_wcharmap.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 scanf_fp.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _scanf.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 scanf_char_file.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 scanf_infnan.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 scanf_hexfp.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 scanf_char_file_locked.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _chval.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _scanf_longlong.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 vfscanf.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 __0sscanf.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _scanf_int.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _scanf_str.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _scanf_wstr.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _scanf_wctomb.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 scanf_char.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _sgetc.o ABSOLUTE
+ ../clib/scanf.c 0x00000000 Number 0 _scanf_mbtowc.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_other.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_rtred_outer.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_exit.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_rtred_formal.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_rtmem_outer.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_rtmem_formal.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_pvfn_inner.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 __raise.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_general.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_rtred_inner.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_rtmem_inner.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_abrt_outer.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_abrt_formal.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_abrt_inner.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_fpe_inner.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_stak_inner.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_cppl_inner.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_pvfn_formal.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_pvfn_outer.o ABSOLUTE
+ ../clib/signal.c 0x00000000 Number 0 defsig_segv_inner.o ABSOLUTE
+ ../clib/signal.s 0x00000000 Number 0 defsig.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fgets_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fputs_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 backspace_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 freadfast_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 stdio.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fread_bytes_avail_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 streamlock.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fwritefast_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 setbuf.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 setvbuf.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fclose.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fgetc_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fputc_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fclose_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 initio.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 ferror_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 setvbuf_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 ungetc.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fflush_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fopen_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 stdio_streams.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 flushlinebuffered_locked.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 backspace.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fflush.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fgetc.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 ftell.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 freadfast.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fread_bytes_avail.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fwritefast.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 ferror.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 filbuf.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fgets.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fputc.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fputs.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fopen.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 flsbuf.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 fseek.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 flushlinebuffered.o ABSOLUTE
+ ../clib/stdio.c 0x00000000 Number 0 initio_locked.o ABSOLUTE
+ ../clib/stdlib.c 0x00000000 Number 0 aeabi_atexit.o ABSOLUTE
+ ../clib/stdlib.c 0x00000000 Number 0 atexit_aeabi.o ABSOLUTE
+ ../clib/stdlib.c 0x00000000 Number 0 bsearchnoex.o ABSOLUTE
+ ../clib/stdlib.c 0x00000000 Number 0 cxa_finalize.o ABSOLUTE
+ ../clib/stdlib.c 0x00000000 Number 0 abort.o ABSOLUTE
+ ../clib/string.c 0x00000000 Number 0 strncmp.o ABSOLUTE
+ ../clib/string.c 0x00000000 Number 0 strlen.o ABSOLUTE
+ ../clib/time.c 0x00000000 Number 0 _monlen.o ABSOLUTE
+ ../clib/time.c 0x00000000 Number 0 mktime.o ABSOLUTE
+ ../clib/time.c 0x00000000 Number 0 localtime.o ABSOLUTE
+ ../clib/time.c 0x00000000 Number 0 localtime_internal.o ABSOLUTE
+ ../clib/wchar.c 0x00000000 Number 0 flsbuf_fwide.o ABSOLUTE
+ ../clib/wchar.c 0x00000000 Number 0 filbuf_fwide.o ABSOLUTE
+ ../fplib/d2f.s 0x00000000 Number 0 d2f.o ABSOLUTE
+ ../fplib/daddsub.s 0x00000000 Number 0 daddsub_clz.o ABSOLUTE
+ ../fplib/dcheck1.s 0x00000000 Number 0 dcheck1.o ABSOLUTE
+ ../fplib/dcmpi.s 0x00000000 Number 0 dcmpi.o ABSOLUTE
+ ../fplib/ddiv.s 0x00000000 Number 0 ddiv.o ABSOLUTE
+ ../fplib/deqf.s 0x00000000 Number 0 deqf.o ABSOLUTE
+ ../fplib/dleqf.s 0x00000000 Number 0 dleqf.o ABSOLUTE
+ ../fplib/dmul.s 0x00000000 Number 0 dmul.o ABSOLUTE
+ ../fplib/dnaninf.s 0x00000000 Number 0 dnaninf.o ABSOLUTE
+ ../fplib/dretinf.s 0x00000000 Number 0 dretinf.o ABSOLUTE
+ ../fplib/drleqf.s 0x00000000 Number 0 drleqf.o ABSOLUTE
+ ../fplib/fpconst.s 0x00000000 Number 0 fpconst.o ABSOLUTE
+ ../fplib/fpinit.s 0x00000000 Number 0 fpinit.o ABSOLUTE
+ ../fplib/fretinf.s 0x00000000 Number 0 fretinf.o ABSOLUTE
+ ../fplib/istatus.s 0x00000000 Number 0 istatus.o ABSOLUTE
+ ../fplib/printf1.s 0x00000000 Number 0 printf1.o ABSOLUTE
+ ../fplib/printf2.s 0x00000000 Number 0 printf2.o ABSOLUTE
+ ../fplib/printf2a.s 0x00000000 Number 0 printf2a.o ABSOLUTE
+ ../fplib/printf2b.s 0x00000000 Number 0 printf2b.o ABSOLUTE
+ ../fplib/retnan.s 0x00000000 Number 0 retnan.o ABSOLUTE
+ ../fplib/scalbn.s 0x00000000 Number 0 scalbn.o ABSOLUTE
+ ../fplib/scanf1.s 0x00000000 Number 0 scanf1.o ABSOLUTE
+ ../fplib/scanf2.s 0x00000000 Number 0 scanf2.o ABSOLUTE
+ ../fplib/scanf2a.s 0x00000000 Number 0 scanf2a.o ABSOLUTE
+ ../fplib/scanf2b.s 0x00000000 Number 0 scanf2b.o ABSOLUTE
+ ../fplib/trapv.s 0x00000000 Number 0 trapv.o ABSOLUTE
+ ../fplib/usenofp.s 0x00000000 Number 0 usenofp.o ABSOLUTE
+ ../mathlib/dunder.c 0x00000000 Number 0 dunder.o ABSOLUTE
+ ../mathlib/fpclassify.c 0x00000000 Number 0 fpclassify.o ABSOLUTE
+ ../mathlib/frexp.c 0x00000000 Number 0 frexp.o ABSOLUTE
+ ../mathlib/ldexp.c 0x00000000 Number 0 ldexp.o ABSOLUTE
+ ../mathlib/ldexp.c 0x00000000 Number 0 ldexp_x.o ABSOLUTE
+ ../mathlib/narrow.c 0x00000000 Number 0 narrow.o ABSOLUTE
+ ../mathlib/qnan.c 0x00000000 Number 0 qnan.o ABSOLUTE
+ dc.s 0x00000000 Number 0 dc.o ABSOLUTE
+ main.cpp 0x00000000 Number 0 main.o ABSOLUTE
+ main.cpp 0x00000000 Number 0 main.o ABSOLUTE
+ mbed-dev/common/AnalogIn.cpp 0x00000000 Number 0 analogin.o ABSOLUTE
+ mbed-dev/common/BusIn.cpp 0x00000000 Number 0 busin.o ABSOLUTE
+ mbed-dev/common/BusInOut.cpp 0x00000000 Number 0 businout.o ABSOLUTE
+ mbed-dev/common/BusOut.cpp 0x00000000 Number 0 busout.o ABSOLUTE
+ mbed-dev/common/CAN.cpp 0x00000000 Number 0 can.o ABSOLUTE
+ mbed-dev/common/CallChain.cpp 0x00000000 Number 0 callchain.o ABSOLUTE
+ mbed-dev/common/Ethernet.cpp 0x00000000 Number 0 ethernet.o ABSOLUTE
+ mbed-dev/common/FileBase.cpp 0x00000000 Number 0 filebase.o ABSOLUTE
+ mbed-dev/common/FileLike.cpp 0x00000000 Number 0 filelike.o ABSOLUTE
+ mbed-dev/common/FilePath.cpp 0x00000000 Number 0 filepath.o ABSOLUTE
+ mbed-dev/common/FileSystemLike.cpp 0x00000000 Number 0 filesystemlike.o ABSOLUTE
+ mbed-dev/common/I2C.cpp 0x00000000 Number 0 i2c.o ABSOLUTE
+ mbed-dev/common/I2CSlave.cpp 0x00000000 Number 0 i2cslave.o ABSOLUTE
+ mbed-dev/common/InterruptIn.cpp 0x00000000 Number 0 interruptin.o ABSOLUTE
+ mbed-dev/common/InterruptManager.cpp 0x00000000 Number 0 interruptmanager.o ABSOLUTE
+ mbed-dev/common/LocalFileSystem.cpp 0x00000000 Number 0 localfilesystem.o ABSOLUTE
+ mbed-dev/common/RawSerial.cpp 0x00000000 Number 0 rawserial.o ABSOLUTE
+ mbed-dev/common/SPI.cpp 0x00000000 Number 0 spi.o ABSOLUTE
+ mbed-dev/common/SPISlave.cpp 0x00000000 Number 0 spislave.o ABSOLUTE
+ mbed-dev/common/Serial.cpp 0x00000000 Number 0 serial.o ABSOLUTE
+ mbed-dev/common/SerialBase.cpp 0x00000000 Number 0 serialbase.o ABSOLUTE
+ mbed-dev/common/Stream.cpp 0x00000000 Number 0 stream.o ABSOLUTE
+ mbed-dev/common/Ticker.cpp 0x00000000 Number 0 ticker.o ABSOLUTE
+ mbed-dev/common/Timeout.cpp 0x00000000 Number 0 timeout.o ABSOLUTE
+ mbed-dev/common/Timer.cpp 0x00000000 Number 0 timer.o ABSOLUTE
+ mbed-dev/common/TimerEvent.cpp 0x00000000 Number 0 timerevent.o ABSOLUTE
+ mbed-dev/common/mbed_alloc_wrappers.cpp 0x00000000 Number 0 mbed_alloc_wrappers.o ABSOLUTE
+ mbed-dev/common/mbed_assert.c 0x00000000 Number 0 mbed_assert.o ABSOLUTE
+ mbed-dev/common/mbed_board.c 0x00000000 Number 0 mbed_board.o ABSOLUTE
+ mbed-dev/common/mbed_critical.c 0x00000000 Number 0 mbed_critical.o ABSOLUTE
+ mbed-dev/common/mbed_error.c 0x00000000 Number 0 mbed_error.o ABSOLUTE
+ mbed-dev/common/mbed_gpio.c 0x00000000 Number 0 mbed_gpio.o ABSOLUTE
+ mbed-dev/common/mbed_interface.c 0x00000000 Number 0 mbed_interface.o ABSOLUTE
+ mbed-dev/common/mbed_lp_ticker_api.c 0x00000000 Number 0 mbed_lp_ticker_api.o ABSOLUTE
+ mbed-dev/common/mbed_mem_trace.c 0x00000000 Number 0 mbed_mem_trace.o ABSOLUTE
+ mbed-dev/common/mbed_pinmap_common.c 0x00000000 Number 0 mbed_pinmap_common.o ABSOLUTE
+ mbed-dev/common/mbed_rtc_time.cpp 0x00000000 Number 0 mbed_rtc_time.o ABSOLUTE
+ mbed-dev/common/mbed_semihost_api.c 0x00000000 Number 0 mbed_semihost_api.o ABSOLUTE
+ mbed-dev/common/mbed_ticker_api.c 0x00000000 Number 0 mbed_ticker_api.o ABSOLUTE
+ mbed-dev/common/mbed_us_ticker_api.c 0x00000000 Number 0 mbed_us_ticker_api.o ABSOLUTE
+ mbed-dev/common/mbed_wait_api.c 0x00000000 Number 0 mbed_wait_api.o ABSOLUTE
+ mbed-dev/common/retarget.cpp 0x00000000 Number 0 retarget.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.cpp 0x00000000 Number 0 sys.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.c 0x00000000 Number 0 cmsis_nvic.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.c 0x00000000 Number 0 hal_tick.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.c 0x00000000 Number 0 system_stm32f4xx.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.c 0x00000000 Number 0 stm32f4xx_hal.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.c 0x00000000 Number 0 stm32f4xx_hal_adc.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.c 0x00000000 Number 0 stm32f4xx_hal_adc_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.c 0x00000000 Number 0 stm32f4xx_hal_can.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.c 0x00000000 Number 0 stm32f4xx_hal_cec.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.c 0x00000000 Number 0 stm32f4xx_hal_cortex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.c 0x00000000 Number 0 stm32f4xx_hal_crc.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.c 0x00000000 Number 0 stm32f4xx_hal_cryp.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.c 0x00000000 Number 0 stm32f4xx_hal_cryp_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.c 0x00000000 Number 0 stm32f4xx_hal_dac.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.c 0x00000000 Number 0 stm32f4xx_hal_dac_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.c 0x00000000 Number 0 stm32f4xx_hal_dcmi.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.c 0x00000000 Number 0 stm32f4xx_hal_dcmi_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.c 0x00000000 Number 0 stm32f4xx_hal_dfsdm.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.c 0x00000000 Number 0 stm32f4xx_hal_dma.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.c 0x00000000 Number 0 stm32f4xx_hal_dma2d.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.c 0x00000000 Number 0 stm32f4xx_hal_dma_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.c 0x00000000 Number 0 stm32f4xx_hal_dsi.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.c 0x00000000 Number 0 stm32f4xx_hal_eth.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.c 0x00000000 Number 0 stm32f4xx_hal_flash.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.c 0x00000000 Number 0 stm32f4xx_hal_flash_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.c 0x00000000 Number 0 stm32f4xx_hal_flash_ramfunc.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.c 0x00000000 Number 0 stm32f4xx_hal_fmpi2c.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.c 0x00000000 Number 0 stm32f4xx_hal_fmpi2c_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.c 0x00000000 Number 0 stm32f4xx_hal_gpio.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.c 0x00000000 Number 0 stm32f4xx_hal_hash.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.c 0x00000000 Number 0 stm32f4xx_hal_hash_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.c 0x00000000 Number 0 stm32f4xx_hal_hcd.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.c 0x00000000 Number 0 stm32f4xx_hal_i2c.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.c 0x00000000 Number 0 stm32f4xx_hal_i2c_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.c 0x00000000 Number 0 stm32f4xx_hal_i2s.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.c 0x00000000 Number 0 stm32f4xx_hal_i2s_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.c 0x00000000 Number 0 stm32f4xx_hal_irda.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.c 0x00000000 Number 0 stm32f4xx_hal_iwdg.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.c 0x00000000 Number 0 stm32f4xx_hal_lptim.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.c 0x00000000 Number 0 stm32f4xx_hal_ltdc.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.c 0x00000000 Number 0 stm32f4xx_hal_ltdc_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_msp_template.c 0x00000000 Number 0 stm32f4xx_hal_msp_template.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.c 0x00000000 Number 0 stm32f4xx_hal_nand.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.c 0x00000000 Number 0 stm32f4xx_hal_nor.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.c 0x00000000 Number 0 stm32f4xx_hal_pccard.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.c 0x00000000 Number 0 stm32f4xx_hal_pcd.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.c 0x00000000 Number 0 stm32f4xx_hal_pcd_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.c 0x00000000 Number 0 stm32f4xx_hal_pwr.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.c 0x00000000 Number 0 stm32f4xx_hal_pwr_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.c 0x00000000 Number 0 stm32f4xx_hal_qspi.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.c 0x00000000 Number 0 stm32f4xx_hal_rcc.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.c 0x00000000 Number 0 stm32f4xx_hal_rcc_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.c 0x00000000 Number 0 stm32f4xx_hal_rng.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.c 0x00000000 Number 0 stm32f4xx_hal_rtc.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.c 0x00000000 Number 0 stm32f4xx_hal_rtc_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.c 0x00000000 Number 0 stm32f4xx_hal_sai.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.c 0x00000000 Number 0 stm32f4xx_hal_sai_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.c 0x00000000 Number 0 stm32f4xx_hal_sd.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.c 0x00000000 Number 0 stm32f4xx_hal_sdram.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.c 0x00000000 Number 0 stm32f4xx_hal_smartcard.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.c 0x00000000 Number 0 stm32f4xx_hal_spdifrx.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.c 0x00000000 Number 0 stm32f4xx_hal_spi.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.c 0x00000000 Number 0 stm32f4xx_hal_sram.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.c 0x00000000 Number 0 stm32f4xx_hal_tim.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.c 0x00000000 Number 0 stm32f4xx_hal_tim_ex.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.c 0x00000000 Number 0 stm32f4xx_hal_uart.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.c 0x00000000 Number 0 stm32f4xx_hal_usart.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.c 0x00000000 Number 0 stm32f4xx_hal_wwdg.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.c 0x00000000 Number 0 stm32f4xx_ll_fmc.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.c 0x00000000 Number 0 stm32f4xx_ll_fsmc.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.c 0x00000000 Number 0 stm32f4xx_ll_sdmmc.o ABSOLUTE
+ mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.c 0x00000000 Number 0 stm32f4xx_ll_usb.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c 0x00000000 Number 0 peripheralpins.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c 0x00000000 Number 0 analogin_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c 0x00000000 Number 0 analogout_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/can_api.c 0x00000000 Number 0 can_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/entropy_hardware_poll.c 0x00000000 Number 0 entropy_hardware_poll.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c 0x00000000 Number 0 gpio_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c 0x00000000 Number 0 gpio_irq_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c 0x00000000 Number 0 i2c_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c 0x00000000 Number 0 mbed_overrides.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c 0x00000000 Number 0 pinmap.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c 0x00000000 Number 0 port_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c 0x00000000 Number 0 pwmout_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c 0x00000000 Number 0 rtc_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c 0x00000000 Number 0 serial_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c 0x00000000 Number 0 sleep.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c 0x00000000 Number 0 spi_api.o ABSOLUTE
+ mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c 0x00000000 Number 0 us_ticker.o ABSOLUTE
+ mbed-dev\common\AnalogIn.cpp 0x00000000 Number 0 analogin.o ABSOLUTE
+ mbed-dev\common\BusIn.cpp 0x00000000 Number 0 busin.o ABSOLUTE
+ mbed-dev\common\BusInOut.cpp 0x00000000 Number 0 businout.o ABSOLUTE
+ mbed-dev\common\BusOut.cpp 0x00000000 Number 0 busout.o ABSOLUTE
+ mbed-dev\common\CAN.cpp 0x00000000 Number 0 can.o ABSOLUTE
+ mbed-dev\common\CallChain.cpp 0x00000000 Number 0 callchain.o ABSOLUTE
+ mbed-dev\common\Ethernet.cpp 0x00000000 Number 0 ethernet.o ABSOLUTE
+ mbed-dev\common\FileBase.cpp 0x00000000 Number 0 filebase.o ABSOLUTE
+ mbed-dev\common\FileLike.cpp 0x00000000 Number 0 filelike.o ABSOLUTE
+ mbed-dev\common\FilePath.cpp 0x00000000 Number 0 filepath.o ABSOLUTE
+ mbed-dev\common\FileSystemLike.cpp 0x00000000 Number 0 filesystemlike.o ABSOLUTE
+ mbed-dev\common\I2C.cpp 0x00000000 Number 0 i2c.o ABSOLUTE
+ mbed-dev\common\I2CSlave.cpp 0x00000000 Number 0 i2cslave.o ABSOLUTE
+ mbed-dev\common\InterruptIn.cpp 0x00000000 Number 0 interruptin.o ABSOLUTE
+ mbed-dev\common\InterruptManager.cpp 0x00000000 Number 0 interruptmanager.o ABSOLUTE
+ mbed-dev\common\LocalFileSystem.cpp 0x00000000 Number 0 localfilesystem.o ABSOLUTE
+ mbed-dev\common\RawSerial.cpp 0x00000000 Number 0 rawserial.o ABSOLUTE
+ mbed-dev\common\SPI.cpp 0x00000000 Number 0 spi.o ABSOLUTE
+ mbed-dev\common\SPISlave.cpp 0x00000000 Number 0 spislave.o ABSOLUTE
+ mbed-dev\common\Serial.cpp 0x00000000 Number 0 serial.o ABSOLUTE
+ mbed-dev\common\SerialBase.cpp 0x00000000 Number 0 serialbase.o ABSOLUTE
+ mbed-dev\common\Stream.cpp 0x00000000 Number 0 stream.o ABSOLUTE
+ mbed-dev\common\Ticker.cpp 0x00000000 Number 0 ticker.o ABSOLUTE
+ mbed-dev\common\Timeout.cpp 0x00000000 Number 0 timeout.o ABSOLUTE
+ mbed-dev\common\Timer.cpp 0x00000000 Number 0 timer.o ABSOLUTE
+ mbed-dev\common\TimerEvent.cpp 0x00000000 Number 0 timerevent.o ABSOLUTE
+ mbed-dev\common\mbed_assert.c 0x00000000 Number 0 mbed_assert.o ABSOLUTE
+ mbed-dev\common\mbed_board.c 0x00000000 Number 0 mbed_board.o ABSOLUTE
+ mbed-dev\common\mbed_critical.c 0x00000000 Number 0 mbed_critical.o ABSOLUTE
+ mbed-dev\common\mbed_error.c 0x00000000 Number 0 mbed_error.o ABSOLUTE
+ mbed-dev\common\mbed_gpio.c 0x00000000 Number 0 mbed_gpio.o ABSOLUTE
+ mbed-dev\common\mbed_interface.c 0x00000000 Number 0 mbed_interface.o ABSOLUTE
+ mbed-dev\common\mbed_lp_ticker_api.c 0x00000000 Number 0 mbed_lp_ticker_api.o ABSOLUTE
+ mbed-dev\common\mbed_pinmap_common.c 0x00000000 Number 0 mbed_pinmap_common.o ABSOLUTE
+ mbed-dev\common\mbed_rtc_time.cpp 0x00000000 Number 0 mbed_rtc_time.o ABSOLUTE
+ mbed-dev\common\mbed_semihost_api.c 0x00000000 Number 0 mbed_semihost_api.o ABSOLUTE
+ mbed-dev\common\mbed_ticker_api.c 0x00000000 Number 0 mbed_ticker_api.o ABSOLUTE
+ mbed-dev\common\mbed_us_ticker_api.c 0x00000000 Number 0 mbed_us_ticker_api.o ABSOLUTE
+ mbed-dev\common\mbed_wait_api.c 0x00000000 Number 0 mbed_wait_api.o ABSOLUTE
+ mbed-dev\common\retarget.cpp 0x00000000 Number 0 retarget.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGET_NUCLEO_F401RE\TOOLCHAIN_ARM_STD\startup_stm32f401xe.S 0x00000000 Number 0 startup_stm32f401xe.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGET_NUCLEO_F401RE\cmsis_nvic.c 0x00000000 Number 0 cmsis_nvic.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGET_NUCLEO_F401RE\hal_tick.c 0x00000000 Number 0 hal_tick.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\TARGET_NUCLEO_F401RE\system_stm32f4xx.c 0x00000000 Number 0 system_stm32f4xx.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal.c 0x00000000 Number 0 stm32f4xx_hal.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_adc.c 0x00000000 Number 0 stm32f4xx_hal_adc.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_adc_ex.c 0x00000000 Number 0 stm32f4xx_hal_adc_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_can.c 0x00000000 Number 0 stm32f4xx_hal_can.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_cec.c 0x00000000 Number 0 stm32f4xx_hal_cec.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_cortex.c 0x00000000 Number 0 stm32f4xx_hal_cortex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_crc.c 0x00000000 Number 0 stm32f4xx_hal_crc.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_cryp.c 0x00000000 Number 0 stm32f4xx_hal_cryp.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_cryp_ex.c 0x00000000 Number 0 stm32f4xx_hal_cryp_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_dac.c 0x00000000 Number 0 stm32f4xx_hal_dac.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_dac_ex.c 0x00000000 Number 0 stm32f4xx_hal_dac_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_dcmi.c 0x00000000 Number 0 stm32f4xx_hal_dcmi.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_dcmi_ex.c 0x00000000 Number 0 stm32f4xx_hal_dcmi_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_dfsdm.c 0x00000000 Number 0 stm32f4xx_hal_dfsdm.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_dma.c 0x00000000 Number 0 stm32f4xx_hal_dma.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_dma2d.c 0x00000000 Number 0 stm32f4xx_hal_dma2d.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_dma_ex.c 0x00000000 Number 0 stm32f4xx_hal_dma_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_dsi.c 0x00000000 Number 0 stm32f4xx_hal_dsi.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_eth.c 0x00000000 Number 0 stm32f4xx_hal_eth.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_flash.c 0x00000000 Number 0 stm32f4xx_hal_flash.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_flash_ex.c 0x00000000 Number 0 stm32f4xx_hal_flash_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_flash_ramfunc.c 0x00000000 Number 0 stm32f4xx_hal_flash_ramfunc.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_fmpi2c.c 0x00000000 Number 0 stm32f4xx_hal_fmpi2c.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_fmpi2c_ex.c 0x00000000 Number 0 stm32f4xx_hal_fmpi2c_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_gpio.c 0x00000000 Number 0 stm32f4xx_hal_gpio.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_hash.c 0x00000000 Number 0 stm32f4xx_hal_hash.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_hash_ex.c 0x00000000 Number 0 stm32f4xx_hal_hash_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_hcd.c 0x00000000 Number 0 stm32f4xx_hal_hcd.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_i2c.c 0x00000000 Number 0 stm32f4xx_hal_i2c.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_i2c_ex.c 0x00000000 Number 0 stm32f4xx_hal_i2c_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_i2s.c 0x00000000 Number 0 stm32f4xx_hal_i2s.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_i2s_ex.c 0x00000000 Number 0 stm32f4xx_hal_i2s_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_irda.c 0x00000000 Number 0 stm32f4xx_hal_irda.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_iwdg.c 0x00000000 Number 0 stm32f4xx_hal_iwdg.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_lptim.c 0x00000000 Number 0 stm32f4xx_hal_lptim.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_ltdc.c 0x00000000 Number 0 stm32f4xx_hal_ltdc.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_ltdc_ex.c 0x00000000 Number 0 stm32f4xx_hal_ltdc_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_msp_template.c 0x00000000 Number 0 stm32f4xx_hal_msp_template.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_nand.c 0x00000000 Number 0 stm32f4xx_hal_nand.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_nor.c 0x00000000 Number 0 stm32f4xx_hal_nor.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_pccard.c 0x00000000 Number 0 stm32f4xx_hal_pccard.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_pcd.c 0x00000000 Number 0 stm32f4xx_hal_pcd.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_pcd_ex.c 0x00000000 Number 0 stm32f4xx_hal_pcd_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_pwr.c 0x00000000 Number 0 stm32f4xx_hal_pwr.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_pwr_ex.c 0x00000000 Number 0 stm32f4xx_hal_pwr_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_qspi.c 0x00000000 Number 0 stm32f4xx_hal_qspi.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_rcc.c 0x00000000 Number 0 stm32f4xx_hal_rcc.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_rcc_ex.c 0x00000000 Number 0 stm32f4xx_hal_rcc_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_rng.c 0x00000000 Number 0 stm32f4xx_hal_rng.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_rtc.c 0x00000000 Number 0 stm32f4xx_hal_rtc.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_rtc_ex.c 0x00000000 Number 0 stm32f4xx_hal_rtc_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_sai.c 0x00000000 Number 0 stm32f4xx_hal_sai.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_sai_ex.c 0x00000000 Number 0 stm32f4xx_hal_sai_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_sd.c 0x00000000 Number 0 stm32f4xx_hal_sd.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_sdram.c 0x00000000 Number 0 stm32f4xx_hal_sdram.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_smartcard.c 0x00000000 Number 0 stm32f4xx_hal_smartcard.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_spdifrx.c 0x00000000 Number 0 stm32f4xx_hal_spdifrx.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_spi.c 0x00000000 Number 0 stm32f4xx_hal_spi.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_sram.c 0x00000000 Number 0 stm32f4xx_hal_sram.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_tim.c 0x00000000 Number 0 stm32f4xx_hal_tim.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_tim_ex.c 0x00000000 Number 0 stm32f4xx_hal_tim_ex.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_uart.c 0x00000000 Number 0 stm32f4xx_hal_uart.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_usart.c 0x00000000 Number 0 stm32f4xx_hal_usart.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_hal_wwdg.c 0x00000000 Number 0 stm32f4xx_hal_wwdg.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_ll_fmc.c 0x00000000 Number 0 stm32f4xx_ll_fmc.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_ll_fsmc.c 0x00000000 Number 0 stm32f4xx_ll_fsmc.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_ll_sdmmc.c 0x00000000 Number 0 stm32f4xx_ll_sdmmc.o ABSOLUTE
+ mbed-dev\targets\cmsis\TARGET_STM\TARGET_STM32F4\stm32f4xx_ll_usb.c 0x00000000 Number 0 stm32f4xx_ll_usb.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\TARGET_NUCLEO_F401RE\PeripheralPins.c 0x00000000 Number 0 peripheralpins.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\analogin_api.c 0x00000000 Number 0 analogin_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\analogout_api.c 0x00000000 Number 0 analogout_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\can_api.c 0x00000000 Number 0 can_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\gpio_api.c 0x00000000 Number 0 gpio_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\gpio_irq_api.c 0x00000000 Number 0 gpio_irq_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\i2c_api.c 0x00000000 Number 0 i2c_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\mbed_overrides.c 0x00000000 Number 0 mbed_overrides.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\pinmap.c 0x00000000 Number 0 pinmap.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\port_api.c 0x00000000 Number 0 port_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\pwmout_api.c 0x00000000 Number 0 pwmout_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\rtc_api.c 0x00000000 Number 0 rtc_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\serial_api.c 0x00000000 Number 0 serial_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\sleep.c 0x00000000 Number 0 sleep.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\spi_api.c 0x00000000 Number 0 spi_api.o ABSOLUTE
+ mbed-dev\targets\hal\TARGET_STM\TARGET_STM32F4\us_ticker.c 0x00000000 Number 0 us_ticker.o ABSOLUTE
+ RESET 0x08000000 Section 404 startup_stm32f401xe.o(RESET)
+ !!!main 0x08000194 Section 8 __main.o(!!!main)
+ !!!scatter 0x0800019c Section 52 __scatter.o(!!!scatter)
+ !!handler_copy 0x080001d0 Section 26 __scatter_copy.o(!!handler_copy)
+ !!handler_zi 0x080001ec Section 28 __scatter_zi.o(!!handler_zi)
+ .ARM.Collect$$_printf_percent$$00000000 0x08000208 Section 0 _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000)
+ .ARM.Collect$$_printf_percent$$00000001 0x08000208 Section 6 _printf_n.o(.ARM.Collect$$_printf_percent$$00000001)
+ .ARM.Collect$$_printf_percent$$00000002 0x0800020e Section 6 _printf_p.o(.ARM.Collect$$_printf_percent$$00000002)
+ .ARM.Collect$$_printf_percent$$00000003 0x08000214 Section 6 _printf_f.o(.ARM.Collect$$_printf_percent$$00000003)
+ .ARM.Collect$$_printf_percent$$00000004 0x0800021a Section 6 _printf_e.o(.ARM.Collect$$_printf_percent$$00000004)
+ .ARM.Collect$$_printf_percent$$00000005 0x08000220 Section 6 _printf_g.o(.ARM.Collect$$_printf_percent$$00000005)
+ .ARM.Collect$$_printf_percent$$00000006 0x08000226 Section 6 _printf_a.o(.ARM.Collect$$_printf_percent$$00000006)
+ .ARM.Collect$$_printf_percent$$00000007 0x0800022c Section 10 _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007)
+ .ARM.Collect$$_printf_percent$$00000008 0x08000236 Section 6 _printf_i.o(.ARM.Collect$$_printf_percent$$00000008)
+ .ARM.Collect$$_printf_percent$$00000009 0x0800023c Section 6 _printf_d.o(.ARM.Collect$$_printf_percent$$00000009)
+ .ARM.Collect$$_printf_percent$$0000000A 0x08000242 Section 6 _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A)
+ .ARM.Collect$$_printf_percent$$0000000B 0x08000248 Section 6 _printf_o.o(.ARM.Collect$$_printf_percent$$0000000B)
+ .ARM.Collect$$_printf_percent$$0000000C 0x0800024e Section 6 _printf_x.o(.ARM.Collect$$_printf_percent$$0000000C)
+ .ARM.Collect$$_printf_percent$$0000000D 0x08000254 Section 6 _printf_lli.o(.ARM.Collect$$_printf_percent$$0000000D)
+ .ARM.Collect$$_printf_percent$$0000000E 0x0800025a Section 6 _printf_lld.o(.ARM.Collect$$_printf_percent$$0000000E)
+ .ARM.Collect$$_printf_percent$$0000000F 0x08000260 Section 6 _printf_llu.o(.ARM.Collect$$_printf_percent$$0000000F)
+ .ARM.Collect$$_printf_percent$$00000010 0x08000266 Section 6 _printf_llo.o(.ARM.Collect$$_printf_percent$$00000010)
+ .ARM.Collect$$_printf_percent$$00000011 0x0800026c Section 6 _printf_llx.o(.ARM.Collect$$_printf_percent$$00000011)
+ .ARM.Collect$$_printf_percent$$00000012 0x08000272 Section 10 _printf_l.o(.ARM.Collect$$_printf_percent$$00000012)
+ .ARM.Collect$$_printf_percent$$00000013 0x0800027c Section 6 _printf_c.o(.ARM.Collect$$_printf_percent$$00000013)
+ .ARM.Collect$$_printf_percent$$00000014 0x08000282 Section 6 _printf_s.o(.ARM.Collect$$_printf_percent$$00000014)
+ .ARM.Collect$$_printf_percent$$00000015 0x08000288 Section 6 _printf_lc.o(.ARM.Collect$$_printf_percent$$00000015)
+ .ARM.Collect$$_printf_percent$$00000016 0x0800028e Section 6 _printf_ls.o(.ARM.Collect$$_printf_percent$$00000016)
+ .ARM.Collect$$_printf_percent$$00000017 0x08000294 Section 4 _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017)
+ .ARM.Collect$$libinit$$00000000 0x08000298 Section 2 libinit.o(.ARM.Collect$$libinit$$00000000)
+ .ARM.Collect$$libinit$$00000001 0x0800029a Section 4 libinit2.o(.ARM.Collect$$libinit$$00000001)
+ .ARM.Collect$$libinit$$00000004 0x0800029e Section 0 libinit2.o(.ARM.Collect$$libinit$$00000004)
+ .ARM.Collect$$libinit$$00000005 0x0800029e Section 8 libinit2.o(.ARM.Collect$$libinit$$00000005)
+ .ARM.Collect$$libinit$$0000000A 0x080002a6 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000000A)
+ .ARM.Collect$$libinit$$0000000C 0x080002a6 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000000C)
+ .ARM.Collect$$libinit$$0000000E 0x080002a6 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000000E)
+ .ARM.Collect$$libinit$$0000000F 0x080002a6 Section 6 libinit2.o(.ARM.Collect$$libinit$$0000000F)
+ .ARM.Collect$$libinit$$00000011 0x080002ac Section 0 libinit2.o(.ARM.Collect$$libinit$$00000011)
+ .ARM.Collect$$libinit$$00000012 0x080002ac Section 12 libinit2.o(.ARM.Collect$$libinit$$00000012)
+ .ARM.Collect$$libinit$$00000013 0x080002b8 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000013)
+ .ARM.Collect$$libinit$$00000015 0x080002b8 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000015)
+ .ARM.Collect$$libinit$$00000016 0x080002b8 Section 10 libinit2.o(.ARM.Collect$$libinit$$00000016)
+ .ARM.Collect$$libinit$$00000017 0x080002c2 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000017)
+ .ARM.Collect$$libinit$$00000019 0x080002c2 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000019)
+ .ARM.Collect$$libinit$$0000001B 0x080002c2 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000001B)
+ .ARM.Collect$$libinit$$0000001D 0x080002c2 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000001D)
+ .ARM.Collect$$libinit$$0000001F 0x080002c2 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000001F)
+ .ARM.Collect$$libinit$$00000021 0x080002c2 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000021)
+ .ARM.Collect$$libinit$$00000023 0x080002c2 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000023)
+ .ARM.Collect$$libinit$$00000024 0x080002c2 Section 4 libinit2.o(.ARM.Collect$$libinit$$00000024)
+ .ARM.Collect$$libinit$$00000025 0x080002c6 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000025)
+ .ARM.Collect$$libinit$$0000002C 0x080002c6 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000002C)
+ .ARM.Collect$$libinit$$0000002E 0x080002c6 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000002E)
+ .ARM.Collect$$libinit$$00000030 0x080002c6 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000030)
+ .ARM.Collect$$libinit$$00000031 0x080002c6 Section 4 libinit2.o(.ARM.Collect$$libinit$$00000031)
+ .ARM.Collect$$libinit$$00000032 0x080002ca Section 0 libinit2.o(.ARM.Collect$$libinit$$00000032)
+ .ARM.Collect$$libinit$$00000033 0x080002ca Section 2 libinit2.o(.ARM.Collect$$libinit$$00000033)
+ .ARM.Collect$$libshutdown$$00000002 0x080002cc Section 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000002)
+ .ARM.Collect$$libshutdown$$00000004 0x080002cc Section 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000004)
+ .ARM.Collect$$rtentry$$00000000 0x080002cc Section 0 __rtentry.o(.ARM.Collect$$rtentry$$00000000)
+ .ARM.Collect$$rtentry$$00000002 0x080002cc Section 0 __rtentry2.o(.ARM.Collect$$rtentry$$00000002)
+ .ARM.Collect$$rtentry$$00000004 0x080002cc Section 6 __rtentry4.o(.ARM.Collect$$rtentry$$00000004)
+ .ARM.Collect$$rtentry$$00000009 0x080002d2 Section 0 __rtentry2.o(.ARM.Collect$$rtentry$$00000009)
+ .ARM.Collect$$rtentry$$0000000A 0x080002d2 Section 4 __rtentry2.o(.ARM.Collect$$rtentry$$0000000A)
+ .ARM.Collect$$rtentry$$0000000C 0x080002d6 Section 0 __rtentry2.o(.ARM.Collect$$rtentry$$0000000C)
+ .ARM.Collect$$rtentry$$0000000D 0x080002d6 Section 8 __rtentry2.o(.ARM.Collect$$rtentry$$0000000D)
+ .emb_text 0x080002e0 Section 0 maybetermalloc1.o(.emb_text)
+ .text 0x080002e0 Section 36 startup_stm32f401xe.o(.text)
+ $v0 0x080002e0 Number 0 startup_stm32f401xe.o(.text)
+ .text 0x08000304 Section 0 h1_alloc.o(.text)
+ .text 0x08000362 Section 0 h1_free.o(.text)
+ .text 0x080003b0 Section 0 vsprintf.o(.text)
+ .text 0x080003d4 Section 0 c89vfprintf.o(.text)
+ .text 0x080003e0 Section 0 __2sprintf.o(.text)
+ .text 0x0800040c Section 0 _printf_dec.o(.text)
+ .text 0x08000484 Section 0 _printf_hex_int_ll_ptr.o(.text)
+ _printf_hex_common 0x08000485 Thumb Code 0 _printf_hex_int_ll_ptr.o(.text)
+ .text 0x08000518 Section 0 __printf_flags_ss_wp.o(.text)
+ .text 0x080006a0 Section 0 __0sscanf.o(.text)
+ .text 0x080006dc Section 0 _scanf_int.o(.text)
+ .text 0x08000828 Section 0 fflush.o(.text)
+ .text 0x0800088c Section 0 fopen.o(.text)
+ _freopen_locked 0x0800088d Thumb Code 0 fopen.o(.text)
+ .text 0x08000978 Section 0 setbuf.o(.text)
+ .text 0x0800098c Section 0 fclose.o(.text)
+ .text 0x080009d8 Section 0 aeabi_atexit.o(.text)
+ .text 0x08000a06 Section 0 strlen.o(.text)
+ .text 0x08000a44 Section 0 strncmp.o(.text)
+ .text 0x08000ada Section 100 rt_memcpy_w.o(.text)
+ .text 0x08000b3e Section 78 rt_memclr_w.o(.text)
+ .text 0x08000b8c Section 128 strcmpv7m.o(.text)
+ .text 0x08000c0c Section 0 init_aeabi.o(.text)
+ .text 0x08000c30 Section 8 rt_heap_descriptor.o(.text)
+ .text 0x08000c38 Section 8 rt_ddtor_pointer_addr.o(.text)
+ .text 0x08000c40 Section 0 hguard.o(.text)
+ .text 0x08000c44 Section 0 init_alloc.o(.text)
+ .text 0x08000cce Section 0 h1_init.o(.text)
+ .text 0x08000cdc Section 0 _printf_pad.o(.text)
+ .text 0x08000d2a Section 0 _printf_truncate.o(.text)
+ .text 0x08000d4e Section 0 _printf_str.o(.text)
+ .text 0x08000da0 Section 0 _printf_intcommon.o(.text)
+ .text 0x08000e52 Section 0 _printf_charcount.o(.text)
+ .text 0x08000e7c Section 0 _printf_char_common.o(.text)
+ _printf_input_char 0x08000e7d Thumb Code 10 _printf_char_common.o(.text)
+ .text 0x08000eac Section 0 _sputc.o(.text)
+ .text 0x08000eb8 Section 0 _printf_char_file.o(.text)
+ .text 0x08000edc Section 0 _printf_wctomb.o(.text)
+ .text 0x08000f98 Section 0 _printf_longlong_dec.o(.text)
+ .text 0x08001014 Section 0 _printf_oct_int_ll.o(.text)
+ _printf_longlong_oct_internal 0x08001015 Thumb Code 0 _printf_oct_int_ll.o(.text)
+ .text 0x08001084 Section 0 _chval.o(.text)
+ .text 0x080010a0 Section 0 scanf_char.o(.text)
+ _scanf_char_input 0x080010a1 Thumb Code 12 scanf_char.o(.text)
+ .text 0x080010cc Section 0 _sgetc.o(.text)
+ .text 0x0800110c Section 0 ferror.o(.text)
+ .text 0x08001114 Section 0 flsbuf.o(.text)
+ .text 0x080012ec Section 0 fseek.o(.text)
+ .text 0x080013e4 Section 0 setvbuf.o(.text)
+ .text 0x0800142c Section 0 stdio.o(.text)
+ .text 0x0800151c Section 0 initio.o(.text)
+ .text 0x08001654 Section 0 cxa_finalize.o(.text)
+ .text 0x08001696 Section 0 defsig_pvfn_outer.o(.text)
+ .text 0x080016a4 Section 0 h1_extend.o(.text)
+ .text 0x080016d8 Section 138 lludiv10.o(.text)
+ .text 0x08001762 Section 0 isspace.o(.text)
+ .text 0x08001774 Section 0 _printf_fp_dec.o(.text)
+ _fp_digits 0x08001777 Thumb Code 428 _printf_fp_dec.o(.text)
+ .text 0x08001b90 Section 0 _printf_fp_hex.o(.text)
+ .text 0x08001e8c Section 0 _printf_char.o(.text)
+ .text 0x08001eb8 Section 0 _printf_wchar.o(.text)
+ .text 0x08001ee4 Section 0 _scanf.o(.text)
+ .text 0x08002258 Section 0 ftell.o(.text)
+ .text 0x0800229a Section 0 _wcrtomb.o(.text)
+ .text 0x080022da Section 0 defsig_exit.o(.text)
+ .text 0x080022e4 Section 0 defsig_rtred_outer.o(.text)
+ .text 0x080022f2 Section 0 defsig_rtmem_outer.o(.text)
+ .text 0x08002300 Section 0 defsig_pvfn_inner.o(.text)
+ .text 0x08002330 Section 0 heapauxa.o(.text)
+ .text 0x08002380 Section 0 sys_exit.o(.text)
+ .text 0x0800238c Section 16 rt_ctype_table.o(.text)
+ .text 0x0800239c Section 8 rt_locale.o(.text)
+ .text 0x080023a4 Section 8 rt_errno_addr.o(.text)
+ .text 0x080023ac Section 0 _printf_fp_infnan.o(.text)
+ .text 0x0800242c Section 0 bigflt0.o(.text)
+ .text 0x08002508 Section 0 defsig_general.o(.text)
+ .text 0x0800253c Section 0 defsig_rtred_inner.o(.text)
+ .text 0x08002570 Section 0 defsig_rtmem_inner.o(.text)
+ .text 0x080025c0 Section 0 sys_wrch.o(.text)
+ .text 0x080025ce Section 2 use_no_semi.o(.text)
+ .text 0x080025d0 Section 0 indicate_semi.o(.text)
+ CL$$btod_d2e 0x080025d0 Section 62 btod.o(CL$$btod_d2e)
+ CL$$btod_d2e_denorm_low 0x0800260e Section 70 btod.o(CL$$btod_d2e_denorm_low)
+ CL$$btod_d2e_norm_op1 0x08002654 Section 96 btod.o(CL$$btod_d2e_norm_op1)
+ CL$$btod_div_common 0x080026b4 Section 824 btod.o(CL$$btod_div_common)
+ CL$$btod_e2e 0x080029ec Section 198 btod.o(CL$$btod_e2e)
+ CL$$btod_ediv 0x08002ab2 Section 40 btod.o(CL$$btod_ediv)
+ CL$$btod_emul 0x08002ada Section 40 btod.o(CL$$btod_emul)
+ CL$$btod_mult_common 0x08002b02 Section 580 btod.o(CL$$btod_mult_common)
+ i.$Sub$$main 0x08002d46 Section 0 retarget.o(i.$Sub$$main)
+ i.<Func3> 0x08002d58 Section 0 serialbase.o(i.<Func3>)
+ <Func3> 0x08002d59 Thumb Code 8 serialbase.o(i.<Func3>)
+ i.HAL_DMA_Abort_IT 0x08002d60 Section 0 stm32f4xx_hal_dma.o(i.HAL_DMA_Abort_IT)
+ i.HAL_GPIO_Init 0x08002d84 Section 0 stm32f4xx_hal_gpio.o(i.HAL_GPIO_Init)
+ i.HAL_GetTick 0x08002f88 Section 0 stm32f4xx_hal.o(i.HAL_GetTick)
+ i.HAL_IncTick 0x08002f94 Section 0 stm32f4xx_hal.o(i.HAL_IncTick)
+ i.HAL_Init 0x08002fa4 Section 0 stm32f4xx_hal.o(i.HAL_Init)
+ i.HAL_InitTick 0x08002fd8 Section 0 hal_tick.o(i.HAL_InitTick)
+ i.HAL_MspInit 0x0800308c Section 0 stm32f4xx_hal_msp_template.o(i.HAL_MspInit)
+ i.HAL_NVIC_SetPriorityGrouping 0x08003090 Section 0 stm32f4xx_hal_cortex.o(i.HAL_NVIC_SetPriorityGrouping)
+ i.HAL_RCC_ClockConfig 0x080030b4 Section 0 stm32f4xx_hal_rcc.o(i.HAL_RCC_ClockConfig)
+ i.HAL_RCC_GetPCLK1Freq 0x0800324c Section 0 stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq)
+ i.HAL_RCC_GetPCLK2Freq 0x0800327c Section 0 stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq)
+ i.HAL_RCC_GetSysClockFreq 0x080032ac Section 0 stm32f4xx_hal_rcc.o(i.HAL_RCC_GetSysClockFreq)
+ i.HAL_RCC_OscConfig 0x08003340 Section 0 stm32f4xx_hal_rcc.o(i.HAL_RCC_OscConfig)
+ i.HAL_TIM_OC_Init 0x080036ac Section 0 stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Init)
+ i.HAL_TIM_OC_MspInit 0x080036e2 Section 0 stm32f4xx_hal_tim.o(i.HAL_TIM_OC_MspInit)
+ i.HAL_TIM_OC_Start 0x080036e4 Section 0 stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Start)
+ i.HAL_UART_ErrorCallback 0x0800371a Section 0 serial_api.o(i.HAL_UART_ErrorCallback)
+ i.HAL_UART_IRQHandler 0x0800374c Section 0 stm32f4xx_hal_uart.o(i.HAL_UART_IRQHandler)
+ i.HAL_UART_Init 0x080039dc Section 0 stm32f4xx_hal_uart.o(i.HAL_UART_Init)
+ i.HAL_UART_MspInit 0x08003a3e Section 0 stm32f4xx_hal_uart.o(i.HAL_UART_MspInit)
+ i.HAL_UART_RxCpltCallback 0x08003a40 Section 0 stm32f4xx_hal_uart.o(i.HAL_UART_RxCpltCallback)
+ i.HAL_UART_TxCpltCallback 0x08003a42 Section 0 serial_api.o(i.HAL_UART_TxCpltCallback)
+ i.SetSysClock 0x08003a54 Section 0 system_stm32f4xx.o(i.SetSysClock)
+ i.Set_GPIO_Clock 0x08003ad8 Section 0 pinmap.o(i.Set_GPIO_Clock)
+ i.SystemCoreClockUpdate 0x08003ba8 Section 0 system_stm32f4xx.o(i.SystemCoreClockUpdate)
+ i.SystemInit 0x08003c2c Section 0 system_stm32f4xx.o(i.SystemInit)
+ i.TIM_Base_SetConfig 0x08003cb4 Section 0 stm32f4xx_hal_tim.o(i.TIM_Base_SetConfig)
+ i.UART_DMAAbortOnError 0x08003d48 Section 0 stm32f4xx_hal_uart.o(i.UART_DMAAbortOnError)
+ UART_DMAAbortOnError 0x08003d49 Thumb Code 16 stm32f4xx_hal_uart.o(i.UART_DMAAbortOnError)
+ i.UART_SetConfig 0x08003d58 Section 0 stm32f4xx_hal_uart.o(i.UART_SetConfig)
+ UART_SetConfig 0x08003d59 Thumb Code 822 stm32f4xx_hal_uart.o(i.UART_SetConfig)
+ i._ZN4mbed10FileHandle4flenEv 0x0800409c Section 0 filelike.o(i._ZN4mbed10FileHandle4flenEv)
+ i._ZN4mbed10FileHandle4lockEv 0x080040ee Section 0 filelike.o(i._ZN4mbed10FileHandle4lockEv)
+ i._ZN4mbed10FileHandle6unlockEv 0x080040f0 Section 0 filelike.o(i._ZN4mbed10FileHandle6unlockEv)
+ i._ZN4mbed10FileHandleD2Ev 0x080040f4 Section 0 retarget.o(i._ZN4mbed10FileHandleD2Ev)
+ i._ZN4mbed10SerialBase10_base_putcEi 0x08004168 Section 0 serialbase.o(i._ZN4mbed10SerialBase10_base_putcEi)
+ i._ZN4mbed10SerialBase12_irq_handlerEj9SerialIrq 0x08004176 Section 0 serialbase.o(i._ZN4mbed10SerialBase12_irq_handlerEj9SerialIrq)
+ i._ZN4mbed10SerialBase24interrupt_handler_asynchEv 0x0800418c Section 0 serialbase.o(i._ZN4mbed10SerialBase24interrupt_handler_asynchEv)
+ i._ZN4mbed10SerialBase4baudEi 0x080041c8 Section 0 serialbase.o(i._ZN4mbed10SerialBase4baudEi)
+ i._ZN4mbed10SerialBase4lockEv 0x080041f0 Section 0 serialbase.o(i._ZN4mbed10SerialBase4lockEv)
+ i._ZN4mbed10SerialBase6unlockEv 0x080041f2 Section 0 serialbase.o(i._ZN4mbed10SerialBase6unlockEv)
+ i._ZN4mbed10SerialBaseC1E7PinNameS1_ 0x080041f4 Section 0 serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_)
+ i._ZN4mbed26mbed_set_unbuffered_streamEPSt6__FILE 0x08004290 Section 0 retarget.o(i._ZN4mbed26mbed_set_unbuffered_streamEPSt6__FILE)
+ i._ZN4mbed6Serial4lockEv 0x08004296 Section 0 serial.o(i._ZN4mbed6Serial4lockEv)
+ i._ZN4mbed6Serial6unlockEv 0x08004298 Section 0 serial.o(i._ZN4mbed6Serial6unlockEv)
+ i._ZN4mbed6SerialC1E7PinNameS1_PKc 0x0800429c Section 0 serial.o(i._ZN4mbed6SerialC1E7PinNameS1_PKc)
+ i._ZN4mbed6SerialD1Ev 0x080042c4 Section 0 serial.o(i._ZN4mbed6SerialD1Ev)
+ i._ZN4mbed6Stream4flenEv 0x080042ec Section 0 stream.o(i._ZN4mbed6Stream4flenEv)
+ i._ZN4mbed6Stream5closeEv 0x080042f0 Section 0 stream.o(i._ZN4mbed6Stream5closeEv)
+ i._ZN4mbed6Stream5lseekEli 0x080042f4 Section 0 stream.o(i._ZN4mbed6Stream5lseekEli)
+ i._ZN4mbed6Stream5writeEPKvj 0x080042f8 Section 0 stream.o(i._ZN4mbed6Stream5writeEPKvj)
+ i._ZN4mbed6Stream6isattyEv 0x08004334 Section 0 stream.o(i._ZN4mbed6Stream6isattyEv)
+ i._ZN4mbed6Stream6printfEPKcz 0x08004338 Section 0 stream.o(i._ZN4mbed6Stream6printfEPKcz)
+ i._ZN4mbed6StreamC2EPKc 0x0800436c Section 0 stream.o(i._ZN4mbed6StreamC2EPKc)
+ i._ZN4mbed6StreamD2Ev 0x080043ac Section 0 stream.o(i._ZN4mbed6StreamD2Ev)
+ i._ZN4mbed8FileBase11getPathTypeEv 0x080043cc Section 0 filebase.o(i._ZN4mbed8FileBase11getPathTypeEv)
+ i._ZN4mbed8FileBase6lookupEPKcj 0x080043d0 Section 0 filebase.o(i._ZN4mbed8FileBase6lookupEPKcj)
+ i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE 0x0800443c Section 0 filebase.o(i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE)
+ i._ZN4mbed8FileBaseD1Ev 0x0800447c Section 0 filebase.o(i._ZN4mbed8FileBaseD1Ev)
+ i._ZN4mbed8FileLikeC2EPKc 0x080044c4 Section 0 filelike.o(i._ZN4mbed8FileLikeC2EPKc)
+ i._ZN4mbed8FileLikeD2Ev 0x080044e8 Section 0 filelike.o(i._ZN4mbed8FileLikeD2Ev)
+ i._ZN4mbed8FilePath10fileSystemEv 0x080044fa Section 0 filepath.o(i._ZN4mbed8FilePath10fileSystemEv)
+ i._ZN4mbed8FilePath4fileEv 0x08004512 Section 0 filepath.o(i._ZN4mbed8FilePath4fileEv)
+ i._ZN4mbed8FilePath6existsEv 0x0800452e Section 0 filepath.o(i._ZN4mbed8FilePath6existsEv)
+ i._ZN4mbed8FilePath6isFileEv 0x08004538 Section 0 filepath.o(i._ZN4mbed8FilePath6isFileEv)
+ i._ZN4mbed8FilePath8fileNameEv 0x08004550 Section 0 filepath.o(i._ZN4mbed8FilePath8fileNameEv)
+ i._ZN4mbed8FilePathC1EPKc 0x08004554 Section 0 filepath.o(i._ZN4mbed8FilePathC1EPKc)
+ i._ZThn184_N4mbed6Serial4lockEv 0x08004594 Section 0 serial.o(i._ZThn184_N4mbed6Serial4lockEv)
+ i._ZThn184_N4mbed6Serial5_putcEi 0x08004596 Section 0 serial.o(i._ZThn184_N4mbed6Serial5_putcEi)
+ i._ZThn184_N4mbed6Serial6unlockEv 0x0800459c Section 0 serial.o(i._ZThn184_N4mbed6Serial6unlockEv)
+ i.__ARM_fpclassify 0x0800459e Section 0 fpclassify.o(i.__ARM_fpclassify)
+ i.__NVIC_SetVector 0x080045d0 Section 0 cmsis_nvic.o(i.__NVIC_SetVector)
+ i.__aeabi_vec_ctor_nocookie_nodtor 0x08004604 Section 0 aeabi_vec_ctor_nocookie_nodtor.o(i.__aeabi_vec_ctor_nocookie_nodtor)
+ i.__cxa_pure_virtual 0x08004628 Section 0 pure_virt.o(i.__cxa_pure_virtual)
+ i.__sti___8_main_cpp_myled 0x08004630 Section 0 main.o(i.__sti___8_main_cpp_myled)
+ __sti___8_main_cpp_myled 0x08004631 Thumb Code 44 main.o(i.__sti___8_main_cpp_myled)
+ i.__user_setup_stackheap 0x0800466c Section 0 sys.o(i.__user_setup_stackheap)
+ i._is_digit 0x0800467c Section 0 __printf_wp.o(i._is_digit)
+ i._sys_close 0x0800468c Section 0 retarget.o(i._sys_close)
+ i._sys_flen 0x080046b8 Section 0 retarget.o(i._sys_flen)
+ i._sys_istty 0x080046e0 Section 0 retarget.o(i._sys_istty)
+ i._sys_open 0x08004708 Section 0 retarget.o(i._sys_open)
+ i._sys_seek 0x080048c0 Section 0 retarget.o(i._sys_seek)
+ i._sys_write 0x080048e8 Section 0 retarget.o(i._sys_write)
+ i.core_util_critical_section_enter 0x08004948 Section 0 mbed_critical.o(i.core_util_critical_section_enter)
+ i.core_util_critical_section_exit 0x080049f0 Section 0 mbed_critical.o(i.core_util_critical_section_exit)
+ i.error 0x08004a64 Section 0 mbed_error.o(i.error)
+ i.exit 0x08004a78 Section 0 retarget.o(i.exit)
+ i.fputc 0x08004a98 Section 0 fputc.o(i.fputc)
+ i.gpio_dir 0x08004ab4 Section 0 gpio_api.o(i.gpio_dir)
+ i.gpio_init 0x08004b40 Section 0 gpio_api.o(i.gpio_init)
+ i.gpio_init_out 0x08004b7c Section 0 mbed_gpio.o(i.gpio_init_out)
+ i.gpio_init_out_ex 0x08004bc8 Section 0 mbed_gpio.o(i.gpio_init_out_ex)
+ i.gpio_mode 0x08004c70 Section 0 gpio_api.o(i.gpio_mode)
+ i.init_uart 0x08004c78 Section 0 serial_api.o(i.init_uart)
+ init_uart 0x08004c79 Thumb Code 104 serial_api.o(i.init_uart)
+ i.main 0x08004cfc Section 0 main.o(i.main)
+ i.mbed_assert_internal 0x08004e1c Section 0 mbed_assert.o(i.mbed_assert_internal)
+ i.mbed_die 0x08004e70 Section 0 mbed_board.o(i.mbed_die)
+ i.mbed_error_printf 0x08004f1c Section 0 mbed_board.o(i.mbed_error_printf)
+ i.mbed_error_vfprintf 0x08004f70 Section 0 mbed_board.o(i.mbed_error_vfprintf)
+ i.mbed_main 0x08004fbc Section 0 retarget.o(i.mbed_main)
+ i.mbed_sdk_init 0x08004fbe Section 0 mbed_overrides.o(i.mbed_sdk_init)
+ i.pin_function 0x08004fcc Section 0 pinmap.o(i.pin_function)
+ i.pin_mode 0x0800506c Section 0 pinmap.o(i.pin_mode)
+ i.pinmap_merge 0x080050f8 Section 0 mbed_pinmap_common.o(i.pinmap_merge)
+ i.pinmap_peripheral 0x08005134 Section 0 mbed_pinmap_common.o(i.pinmap_peripheral)
+ i.pinmap_pinout 0x08005194 Section 0 mbed_pinmap_common.o(i.pinmap_pinout)
+ i.serial_baud 0x080051f0 Section 0 serial_api.o(i.serial_baud)
+ i.serial_init 0x080051f8 Section 0 serial_api.o(i.serial_init)
+ i.serial_irq_handler 0x080053a8 Section 0 serial_api.o(i.serial_irq_handler)
+ i.serial_irq_handler_asynch 0x080053c0 Section 0 serial_api.o(i.serial_irq_handler_asynch)
+ i.serial_putc 0x0800551c Section 0 serial_api.o(i.serial_putc)
+ i.ticker_irq_handler 0x08005540 Section 0 mbed_ticker_api.o(i.ticker_irq_handler)
+ i.timer_irq_handler 0x08005590 Section 0 hal_tick.o(i.timer_irq_handler)
+ i.us_ticker_clear_interrupt 0x080055f4 Section 0 us_ticker.o(i.us_ticker_clear_interrupt)
+ i.us_ticker_disable_interrupt 0x08005604 Section 0 us_ticker.o(i.us_ticker_disable_interrupt)
+ i.us_ticker_init 0x08005618 Section 0 us_ticker.o(i.us_ticker_init)
+ i.us_ticker_irq_handler 0x08005640 Section 0 mbed_us_ticker_api.o(i.us_ticker_irq_handler)
+ i.us_ticker_read 0x0800564c Section 0 us_ticker.o(i.us_ticker_read)
+ i.us_ticker_set_interrupt 0x0800567c Section 0 us_ticker.o(i.us_ticker_set_interrupt)
+ i.wait 0x08005690 Section 0 mbed_wait_api.o(i.wait)
+ i.wait_ms 0x080056b8 Section 0 mbed_wait_api.o(i.wait_ms)
+ locale$$code 0x080056d4 Section 44 lc_numeric_c.o(locale$$code)
+ locale$$code 0x08005700 Section 44 lc_ctype_c.o(locale$$code)
+ t._ZN12SingletonPtrI13PlatformMutexEptEv 0x0800572c Section 0 filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv)
+ t._ZN6CThunkIN4mbed10SerialBaseEE10trampolineEPS1_PvPMS1_FvS4_E 0x08005758 Section 0 serialbase.o(t._ZN6CThunkIN4mbed10SerialBaseEE10trampolineEPS1_PvPMS1_FvS4_E)
+ x$fpl$fpinit 0x0800578e Section 10 fpinit.o(x$fpl$fpinit)
+ $v0 0x0800578e Number 0 fpinit.o(x$fpl$fpinit)
+ x$fpl$printf1 0x08005798 Section 4 printf1.o(x$fpl$printf1)
+ $v0 0x08005798 Number 0 printf1.o(x$fpl$printf1)
+ x$fpl$printf2 0x0800579c Section 4 printf2.o(x$fpl$printf2)
+ $v0 0x0800579c Number 0 printf2.o(x$fpl$printf2)
+ .constdata 0x080057a0 Section 72 peripheralpins.o(.constdata)
+ x$fpl$usenofp 0x080057a0 Section 0 usenofp.o(x$fpl$usenofp)
+ .constdata 0x080057e8 Section 72 peripheralpins.o(.constdata)
+ .constdata 0x08005830 Section 16 system_stm32f4xx.o(.constdata)
+ .constdata 0x08005840 Section 52 pinmap.o(.constdata)
+ gpio_mode 0x08005840 Data 52 pinmap.o(.constdata)
+ .constdata 0x08005874 Section 16 stm32f4xx_hal_rcc.o(.constdata)
+ .constdata 0x08005884 Section 20 mbed_us_ticker_api.o(.constdata)
+ us_interface 0x08005884 Data 20 mbed_us_ticker_api.o(.constdata)
+ .constdata 0x08005898 Section 8 mbed_us_ticker_api.o(.constdata)
+ us_data 0x08005898 Data 8 mbed_us_ticker_api.o(.constdata)
+ .constdata 0x080058a0 Section 23 retarget.o(.constdata)
+ .constdata 0x080058b8 Section 16 serialbase.o(.constdata)
+ <Data1> 0x080058b8 Data 8 serialbase.o(.constdata)
+ <Data2> 0x080058c0 Data 8 serialbase.o(.constdata)
+ .constdata 0x080058c8 Section 40 _printf_hex_int_ll_ptr.o(.constdata)
+ uc_hextab 0x080058c8 Data 20 _printf_hex_int_ll_ptr.o(.constdata)
+ lc_hextab 0x080058dc Data 20 _printf_hex_int_ll_ptr.o(.constdata)
+ .constdata 0x080058f0 Section 17 __printf_flags_ss_wp.o(.constdata)
+ maptable 0x080058f0 Data 17 __printf_flags_ss_wp.o(.constdata)
+ .constdata 0x08005904 Section 8 _printf_wctomb.o(.constdata)
+ initial_mbstate 0x08005904 Data 8 _printf_wctomb.o(.constdata)
+ .constdata 0x0800590c Section 38 _printf_fp_hex.o(.constdata)
+ lc_hextab 0x0800590c Data 19 _printf_fp_hex.o(.constdata)
+ uc_hextab 0x0800591f Data 19 _printf_fp_hex.o(.constdata)
+ .constdata 0x08005934 Section 148 bigflt0.o(.constdata)
+ tenpwrs_x 0x08005934 Data 60 bigflt0.o(.constdata)
+ tenpwrs_i 0x08005970 Data 64 bigflt0.o(.constdata)
+ .constdata__ZTVN4mbed10FileHandleE 0x080059c8 Section 52 retarget.o(.constdata__ZTVN4mbed10FileHandleE)
+ .constdata__ZTVN4mbed10SerialBaseE 0x080059fc Section 24 serialbase.o(.constdata__ZTVN4mbed10SerialBaseE)
+ .constdata__ZTVN4mbed6SerialE 0x08005a14 Section 108 serial.o(.constdata__ZTVN4mbed6SerialE)
+ .constdata__ZTVN4mbed6StreamE 0x08005a80 Section 76 stream.o(.constdata__ZTVN4mbed6StreamE)
+ .constdata__ZTVN4mbed8FileBaseE 0x08005acc Section 16 filebase.o(.constdata__ZTVN4mbed8FileBaseE)
+ .constdata__ZTVN4mbed8FileLikeE 0x08005adc Section 68 filelike.o(.constdata__ZTVN4mbed8FileLikeE)
+ .constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs 0x08005b20 Section 20 filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs)
+ .constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0 0x08005b34 Section 28 filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0)
+ locale$$data 0x08005b70 Section 28 lc_numeric_c.o(locale$$data)
+ __lcnum_c_name 0x08005b74 Data 2 lc_numeric_c.o(locale$$data)
+ __lcnum_c_start 0x08005b7c Data 0 lc_numeric_c.o(locale$$data)
+ __lcnum_c_point 0x08005b88 Data 0 lc_numeric_c.o(locale$$data)
+ __lcnum_c_thousands 0x08005b8a Data 0 lc_numeric_c.o(locale$$data)
+ __lcnum_c_grouping 0x08005b8b Data 0 lc_numeric_c.o(locale$$data)
+ locale$$data 0x08005b8c Section 272 lc_ctype_c.o(locale$$data)
+ __lcnum_c_end 0x08005b8c Data 0 lc_numeric_c.o(locale$$data)
+ __lcctype_c_name 0x08005b90 Data 2 lc_ctype_c.o(locale$$data)
+ __lcctype_c_start 0x08005b98 Data 0 lc_ctype_c.o(locale$$data)
+ .init_array 0x08005c9c Section 4 main.o(.init_array)
+ __lcctype_c_end 0x08005c9c Data 0 lc_ctype_c.o(locale$$data)
+ .init_array 0x08005ca0 Section 0 init_aeabi.o(.init_array)
+ .data 0x20000194 Section 4 hal_tick.o(.data)
+ .data 0x20000198 Section 4 system_stm32f4xx.o(.data)
+ .data 0x2000019c Section 8 serial_api.o(.data)
+ irq_handler 0x200001a0 Data 4 serial_api.o(.data)
+ .data 0x200001a4 Section 4 stm32f4xx_hal.o(.data)
+ .data 0x200001a8 Section 4 us_ticker.o(.data)
+ us_ticker_inited 0x200001a8 Data 4 us_ticker.o(.data)
+ .data 0x200001ac Section 12 filebase.o(.data)
+ .data 0x200001b8 Section 8 mbed_critical.o(.data)
+ critical_interrupts_disabled 0x200001b8 Data 1 mbed_critical.o(.data)
+ interrupt_enable_counter 0x200001bc Data 4 mbed_critical.o(.data)
+ .data 0x200001c0 Section 8 mbed_us_ticker_api.o(.data)
+ events 0x200001c0 Data 8 mbed_us_ticker_api.o(.data)
+ .data 0x200001c8 Section 8 retarget.o(.data)
+ filehandle_mutex 0x200001c8 Data 8 retarget.o(.data)
+ .data 0x200001d0 Section 4 stdio_streams.o(.data)
+ .data 0x200001d4 Section 4 stdio_streams.o(.data)
+ .data 0x200001d8 Section 4 stdio_streams.o(.data)
+ .data 0x200001dc Section 4 heapauxa.o(.data)
+ __rt_heap_escrow_base 0x200001dc Data 4 heapauxa.o(.data)
+ .bss 0x200001e0 Section 60 hal_tick.o(.bss)
+ .bss 0x2000021c Section 620 serial_api.o(.bss)
+ serial_irq_ids 0x2000021c Data 32 serial_api.o(.bss)
+ uart_handlers 0x2000023c Data 512 serial_api.o(.bss)
+ .bss 0x20000488 Section 60 us_ticker.o(.bss)
+ TimMasterHandle 0x20000488 Data 60 us_ticker.o(.bss)
+ .bss 0x200004c4 Section 64 retarget.o(.bss)
+ filehandles 0x200004c4 Data 64 retarget.o(.bss)
+ .bss 0x20000504 Section 228 main.o(.bss)
+ .bss 0x200005e8 Section 84 stdio_streams.o(.bss)
+ .bss 0x2000063c Section 84 stdio_streams.o(.bss)
+ .bss 0x20000690 Section 84 stdio_streams.o(.bss)
+ .bss 0x200006e4 Section 4 rt_heap_descriptor.o(.bss)
+ __rt_heap_descriptor_data 0x200006e4 Data 4 rt_heap_descriptor.o(.bss)
+ .bss 0x200006e8 Section 4 rt_ddtor_pointer_addr.o(.bss)
+ __rt_ddtor_pointer_addr_data 0x200006e8 Data 4 rt_ddtor_pointer_addr.o(.bss)
+ .bss 0x200006ec Section 20 rt_locale.o(.bss)
+ __rt_locale_data 0x200006ec Data 20 rt_locale.o(.bss)
+ .bss 0x20000700 Section 4 rt_errno_addr.o(.bss)
+ __aeabi_errno_addr_data 0x20000700 Data 4 rt_errno_addr.o(.bss)
+
+ Global Symbols
+
+ Symbol Name Value Ov Type Size Object(Section)
+
+ BuildAttributes$$THM_ISAv4$E$P$D$K$B$S$7EM$VFPi3$EXTD16$VFPS$VFMA$PE$A:L22UL41UL21$X:L11$S22US41US21$IEEE1$IW$USESV6$~STKCKD$USESV7$~SHL$OTIME$ROPI$IEEEX$EBA8$UX$STANDARDLIB$REQ8$PRES8$EABIv2 0x00000000 Number 0 anon$$obj.o ABSOLUTE
+ __ARM_use_no_argv 0x00000000 Number 0 main.o ABSOLUTE
+ _printf_flags 0x00000000 Number 0 printf_stubs.o ABSOLUTE
+ _printf_return_value 0x00000000 Number 0 printf_stubs.o ABSOLUTE
+ _printf_sizespec 0x00000000 Number 0 printf_stubs.o ABSOLUTE
+ _printf_widthprec 0x00000000 Number 0 printf_stubs.o ABSOLUTE
+ SHT$$ARM_EXIDX$$Base - Undefined Reference
+ SHT$$ARM_EXIDX$$Limit - Undefined Reference
+ __ARM::default_unexpected_handler() - Undefined Weak Reference
+ __ARM_exceptions_buffer_required - Undefined Weak Reference
+ __ARM_exceptions_init - Undefined Weak Reference
+ __aeabi_unwind_cpp_pr1 - Undefined Weak Reference
+ __aeabi_unwind_cpp_pr2 - Undefined Weak Reference
+ __alloca_initialize - Undefined Weak Reference
+ __arm_preinit_ - Undefined Weak Reference
+ __cxa_begin_cleanup - Undefined Weak Reference
+ __cxa_call_unexpected - Undefined Weak Reference
+ __cxa_type_match - Undefined Weak Reference
+ __rt_lib_shutdown - Undefined Weak Reference
+ __sigvec_lookup - Undefined Weak Reference
+ __user_heap_extent - Undefined Weak Reference
+ _atexit_init - Undefined Weak Reference
+ _clock_init - Undefined Weak Reference
+ _fp_trap_init - Undefined Weak Reference
+ _fp_trap_shutdown - Undefined Weak Reference
+ _get_lc_collate - Undefined Weak Reference
+ _get_lc_monetary - Undefined Weak Reference
+ _get_lc_time - Undefined Weak Reference
+ _getenv_init - Undefined Weak Reference
+ _handle_redirection - Undefined Weak Reference
+ _mutex_acquire - Undefined Weak Reference
+ _mutex_free - Undefined Weak Reference
+ _mutex_release - Undefined Weak Reference
+ _printf_mbtowc - Undefined Weak Reference
+ _printf_wc - Undefined Weak Reference
+ _rand_init - Undefined Weak Reference
+ _signal_finish - Undefined Weak Reference
+ _signal_init - Undefined Weak Reference
+ __Vectors_Size 0x00000194 Number 0 startup_stm32f401xe.o ABSOLUTE
+ __Vectors 0x08000000 Data 4 startup_stm32f401xe.o(RESET)
+ __dso_handle 0x08000000 Number 0 startup_stm32f401xe.o(RESET)
+ __Vectors_End 0x08000194 Data 0 startup_stm32f401xe.o(RESET)
+ __main 0x08000195 Thumb Code 8 __main.o(!!!main)
+ __scatterload 0x0800019d Thumb Code 0 __scatter.o(!!!scatter)
+ __scatterload_rt2 0x0800019d Thumb Code 44 __scatter.o(!!!scatter)
+ __scatterload_rt2_thumb_only 0x0800019d Thumb Code 0 __scatter.o(!!!scatter)
+ __scatterload_null 0x080001ab Thumb Code 0 __scatter.o(!!!scatter)
+ __scatterload_copy 0x080001d1 Thumb Code 26 __scatter_copy.o(!!handler_copy)
+ __scatterload_zeroinit 0x080001ed Thumb Code 28 __scatter_zi.o(!!handler_zi)
+ _printf_n 0x08000209 Thumb Code 0 _printf_n.o(.ARM.Collect$$_printf_percent$$00000001)
+ _printf_percent 0x08000209 Thumb Code 0 _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000)
+ _printf_p 0x0800020f Thumb Code 0 _printf_p.o(.ARM.Collect$$_printf_percent$$00000002)
+ _printf_f 0x08000215 Thumb Code 0 _printf_f.o(.ARM.Collect$$_printf_percent$$00000003)
+ _printf_e 0x0800021b Thumb Code 0 _printf_e.o(.ARM.Collect$$_printf_percent$$00000004)
+ _printf_g 0x08000221 Thumb Code 0 _printf_g.o(.ARM.Collect$$_printf_percent$$00000005)
+ _printf_a 0x08000227 Thumb Code 0 _printf_a.o(.ARM.Collect$$_printf_percent$$00000006)
+ _printf_ll 0x0800022d Thumb Code 0 _printf_ll.o(.ARM.Collect$$_printf_percent$$00000007)
+ _printf_i 0x08000237 Thumb Code 0 _printf_i.o(.ARM.Collect$$_printf_percent$$00000008)
+ _printf_d 0x0800023d Thumb Code 0 _printf_d.o(.ARM.Collect$$_printf_percent$$00000009)
+ _printf_u 0x08000243 Thumb Code 0 _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A)
+ _printf_o 0x08000249 Thumb Code 0 _printf_o.o(.ARM.Collect$$_printf_percent$$0000000B)
+ _printf_x 0x0800024f Thumb Code 0 _printf_x.o(.ARM.Collect$$_printf_percent$$0000000C)
+ _printf_lli 0x08000255 Thumb Code 0 _printf_lli.o(.ARM.Collect$$_printf_percent$$0000000D)
+ _printf_lld 0x0800025b Thumb Code 0 _printf_lld.o(.ARM.Collect$$_printf_percent$$0000000E)
+ _printf_llu 0x08000261 Thumb Code 0 _printf_llu.o(.ARM.Collect$$_printf_percent$$0000000F)
+ _printf_llo 0x08000267 Thumb Code 0 _printf_llo.o(.ARM.Collect$$_printf_percent$$00000010)
+ _printf_llx 0x0800026d Thumb Code 0 _printf_llx.o(.ARM.Collect$$_printf_percent$$00000011)
+ _printf_l 0x08000273 Thumb Code 0 _printf_l.o(.ARM.Collect$$_printf_percent$$00000012)
+ _printf_c 0x0800027d Thumb Code 0 _printf_c.o(.ARM.Collect$$_printf_percent$$00000013)
+ _printf_s 0x08000283 Thumb Code 0 _printf_s.o(.ARM.Collect$$_printf_percent$$00000014)
+ _printf_lc 0x08000289 Thumb Code 0 _printf_lc.o(.ARM.Collect$$_printf_percent$$00000015)
+ _printf_ls 0x0800028f Thumb Code 0 _printf_ls.o(.ARM.Collect$$_printf_percent$$00000016)
+ _printf_percent_end 0x08000295 Thumb Code 0 _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017)
+ __rt_lib_init 0x08000299 Thumb Code 0 libinit.o(.ARM.Collect$$libinit$$00000000)
+ __rt_lib_init_fp_1 0x0800029b Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000001)
+ __rt_lib_init_heap_2 0x0800029f Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000005)
+ __rt_lib_init_preinit_1 0x0800029f Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000004)
+ __rt_lib_init_heap_1 0x080002a7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000000A)
+ __rt_lib_init_lc_common 0x080002a7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000000F)
+ __rt_lib_init_rand_1 0x080002a7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000000E)
+ __rt_lib_init_user_alloc_1 0x080002a7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000000C)
+ __rt_lib_init_lc_collate_1 0x080002ad Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000011)
+ __rt_lib_init_lc_ctype_2 0x080002ad Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000012)
+ __rt_lib_init_lc_ctype_1 0x080002b9 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000013)
+ __rt_lib_init_lc_monetary_1 0x080002b9 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000015)
+ __rt_lib_init_lc_numeric_2 0x080002b9 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000016)
+ __rt_lib_init_atexit_1 0x080002c3 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000001B)
+ __rt_lib_init_clock_1 0x080002c3 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000021)
+ __rt_lib_init_fp_trap_1 0x080002c3 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000001F)
+ __rt_lib_init_getenv_1 0x080002c3 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000023)
+ __rt_lib_init_lc_numeric_1 0x080002c3 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000017)
+ __rt_lib_init_lc_time_1 0x080002c3 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000019)
+ __rt_lib_init_signal_1 0x080002c3 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000001D)
+ __rt_lib_init_stdio_2 0x080002c3 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000024)
+ __rt_lib_init_alloca_1 0x080002c7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000002E)
+ __rt_lib_init_argv_1 0x080002c7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000002C)
+ __rt_lib_init_cpp_2 0x080002c7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000031)
+ __rt_lib_init_exceptions_1 0x080002c7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000030)
+ __rt_lib_init_stdio_1 0x080002c7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000025)
+ __rt_lib_init_cpp_1 0x080002cb Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000032)
+ __rt_lib_init_return 0x080002cb Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000033)
+ __rt_entry 0x080002cd Thumb Code 0 __rtentry.o(.ARM.Collect$$rtentry$$00000000)
+ __rt_entry_presh_1 0x080002cd Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$00000002)
+ __rt_entry_sh 0x080002cd Thumb Code 0 __rtentry4.o(.ARM.Collect$$rtentry$$00000004)
+ __rt_lib_shutdown_cpp_2 0x080002cd Thumb Code 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000002)
+ __rt_lib_shutdown_stdio_2 0x080002cd Thumb Code 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000004)
+ __rt_entry_li 0x080002d3 Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$0000000A)
+ __rt_entry_postsh_1 0x080002d3 Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$00000009)
+ __rt_entry_main 0x080002d7 Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$0000000D)
+ __rt_entry_postli_1 0x080002d7 Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$0000000C)
+ Reset_Handler 0x080002e1 Thumb Code 8 startup_stm32f401xe.o(.text)
+ _maybe_terminate_alloc 0x080002e1 Thumb Code 0 maybetermalloc1.o(.emb_text)
+ NMI_Handler 0x080002e9 Thumb Code 2 startup_stm32f401xe.o(.text)
+ HardFault_Handler 0x080002eb Thumb Code 2 startup_stm32f401xe.o(.text)
+ MemManage_Handler 0x080002ed Thumb Code 2 startup_stm32f401xe.o(.text)
+ BusFault_Handler 0x080002ef Thumb Code 2 startup_stm32f401xe.o(.text)
+ UsageFault_Handler 0x080002f1 Thumb Code 2 startup_stm32f401xe.o(.text)
+ SVC_Handler 0x080002f3 Thumb Code 2 startup_stm32f401xe.o(.text)
+ DebugMon_Handler 0x080002f5 Thumb Code 2 startup_stm32f401xe.o(.text)
+ PendSV_Handler 0x080002f7 Thumb Code 2 startup_stm32f401xe.o(.text)
+ SysTick_Handler 0x080002f9 Thumb Code 2 startup_stm32f401xe.o(.text)
+ ADC_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA1_Stream0_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA1_Stream1_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA1_Stream2_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA1_Stream3_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA1_Stream4_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA1_Stream5_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA1_Stream6_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA1_Stream7_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA2_Stream0_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA2_Stream1_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA2_Stream2_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA2_Stream3_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA2_Stream4_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA2_Stream5_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA2_Stream6_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ DMA2_Stream7_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ EXTI0_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ EXTI15_10_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ EXTI1_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ EXTI2_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ EXTI3_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ EXTI4_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ EXTI9_5_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ FLASH_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ FPU_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ I2C1_ER_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ I2C1_EV_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ I2C2_ER_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ I2C2_EV_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ I2C3_ER_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ I2C3_EV_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ OTG_FS_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ OTG_FS_WKUP_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ PVD_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ RCC_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ RTC_Alarm_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ RTC_WKUP_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ SDIO_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ SPI1_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ SPI2_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ SPI3_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ SPI4_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ TAMP_STAMP_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ TIM1_BRK_TIM9_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ TIM1_CC_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ TIM1_TRG_COM_TIM11_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ TIM1_UP_TIM10_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ TIM2_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ TIM3_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ TIM4_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ TIM5_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ USART1_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ USART2_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ USART6_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ WWDG_IRQHandler 0x080002fb Thumb Code 0 startup_stm32f401xe.o(.text)
+ malloc 0x08000305 Thumb Code 94 h1_alloc.o(.text)
+ free 0x08000363 Thumb Code 78 h1_free.o(.text)
+ vsprintf 0x080003b1 Thumb Code 32 vsprintf.o(.text)
+ __c89vfprintf 0x080003d5 Thumb Code 10 c89vfprintf.o(.text)
+ __2sprintf 0x080003e1 Thumb Code 38 __2sprintf.o(.text)
+ _printf_int_dec 0x0800040d Thumb Code 104 _printf_dec.o(.text)
+ _printf_longlong_hex 0x08000485 Thumb Code 86 _printf_hex_int_ll_ptr.o(.text)
+ _printf_int_hex 0x080004db Thumb Code 28 _printf_hex_int_ll_ptr.o(.text)
+ _printf_ll_hex 0x080004f7 Thumb Code 12 _printf_hex_int_ll_ptr.o(.text)
+ _printf_hex_ptr 0x08000503 Thumb Code 18 _printf_hex_int_ll_ptr.o(.text)
+ __printf 0x08000519 Thumb Code 388 __printf_flags_ss_wp.o(.text)
+ __0sscanf 0x080006a1 Thumb Code 52 __0sscanf.o(.text)
+ _scanf_int 0x080006dd Thumb Code 332 _scanf_int.o(.text)
+ _do_fflush 0x08000829 Thumb Code 54 fflush.o(.text)
+ fflush 0x0800085f Thumb Code 42 fflush.o(.text)
+ freopen 0x0800088d Thumb Code 158 fopen.o(.text)
+ fopen 0x0800092b Thumb Code 74 fopen.o(.text)
+ setbuf 0x08000979 Thumb Code 20 setbuf.o(.text)
+ _fclose_internal 0x0800098d Thumb Code 76 fclose.o(.text)
+ fclose 0x0800098d Thumb Code 0 fclose.o(.text)
+ __aeabi_atexit 0x080009d9 Thumb Code 46 aeabi_atexit.o(.text)
+ strlen 0x08000a07 Thumb Code 62 strlen.o(.text)
+ strncmp 0x08000a45 Thumb Code 150 strncmp.o(.text)
+ __aeabi_memcpy4 0x08000adb Thumb Code 0 rt_memcpy_w.o(.text)
+ __aeabi_memcpy8 0x08000adb Thumb Code 0 rt_memcpy_w.o(.text)
+ __rt_memcpy_w 0x08000adb Thumb Code 100 rt_memcpy_w.o(.text)
+ _memcpy_lastbytes_aligned 0x08000b23 Thumb Code 0 rt_memcpy_w.o(.text)
+ __aeabi_memclr4 0x08000b3f Thumb Code 0 rt_memclr_w.o(.text)
+ __aeabi_memclr8 0x08000b3f Thumb Code 0 rt_memclr_w.o(.text)
+ __rt_memclr_w 0x08000b3f Thumb Code 78 rt_memclr_w.o(.text)
+ _memset_w 0x08000b43 Thumb Code 0 rt_memclr_w.o(.text)
+ strcmp 0x08000b8d Thumb Code 128 strcmpv7m.o(.text)
+ __cpp_initialize__aeabi_ 0x08000c0d Thumb Code 26 init_aeabi.o(.text)
+ __rt_heap_descriptor 0x08000c31 Thumb Code 8 rt_heap_descriptor.o(.text)
+ __rt_ddtor_pointer_addr 0x08000c39 Thumb Code 8 rt_ddtor_pointer_addr.o(.text)
+ __use_no_heap 0x08000c41 Thumb Code 2 hguard.o(.text)
+ __heap$guard 0x08000c43 Thumb Code 2 hguard.o(.text)
+ _terminate_user_alloc 0x08000c45 Thumb Code 2 init_alloc.o(.text)
+ _init_user_alloc 0x08000c47 Thumb Code 2 init_alloc.o(.text)
+ __Heap_Full 0x08000c49 Thumb Code 34 init_alloc.o(.text)
+ __Heap_Broken 0x08000c6b Thumb Code 6 init_alloc.o(.text)
+ _init_alloc 0x08000c71 Thumb Code 94 init_alloc.o(.text)
+ __Heap_Initialize 0x08000ccf Thumb Code 10 h1_init.o(.text)
+ __Heap_DescSize 0x08000cd9 Thumb Code 4 h1_init.o(.text)
+ _printf_pre_padding 0x08000cdd Thumb Code 44 _printf_pad.o(.text)
+ _printf_post_padding 0x08000d09 Thumb Code 34 _printf_pad.o(.text)
+ _printf_truncate_signed 0x08000d2b Thumb Code 18 _printf_truncate.o(.text)
+ _printf_truncate_unsigned 0x08000d3d Thumb Code 18 _printf_truncate.o(.text)
+ _printf_str 0x08000d4f Thumb Code 82 _printf_str.o(.text)
+ _printf_int_common 0x08000da1 Thumb Code 178 _printf_intcommon.o(.text)
+ _printf_charcount 0x08000e53 Thumb Code 40 _printf_charcount.o(.text)
+ _printf_char_common 0x08000e87 Thumb Code 32 _printf_char_common.o(.text)
+ _sputc 0x08000ead Thumb Code 10 _sputc.o(.text)
+ _printf_char_file 0x08000eb9 Thumb Code 32 _printf_char_file.o(.text)
+ _printf_wctomb 0x08000edd Thumb Code 182 _printf_wctomb.o(.text)
+ _printf_longlong_dec 0x08000f99 Thumb Code 108 _printf_longlong_dec.o(.text)
+ _printf_longlong_oct 0x08001015 Thumb Code 68 _printf_oct_int_ll.o(.text)
+ _printf_int_oct 0x08001059 Thumb Code 24 _printf_oct_int_ll.o(.text)
+ _printf_ll_oct 0x08001071 Thumb Code 12 _printf_oct_int_ll.o(.text)
+ _chval 0x08001085 Thumb Code 28 _chval.o(.text)
+ __vfscanf_char 0x080010ad Thumb Code 24 scanf_char.o(.text)
+ _sgetc 0x080010cd Thumb Code 30 _sgetc.o(.text)
+ _sbackspace 0x080010eb Thumb Code 34 _sgetc.o(.text)
+ ferror 0x0800110d Thumb Code 8 ferror.o(.text)
+ __flsbuf 0x08001115 Thumb Code 470 flsbuf.o(.text)
+ __flsbuf_byte 0x08001115 Thumb Code 0 flsbuf.o(.text)
+ __flsbuf_wide 0x08001115 Thumb Code 0 flsbuf.o(.text)
+ _fseek 0x080012ed Thumb Code 242 fseek.o(.text)
+ fseek 0x080012ed Thumb Code 0 fseek.o(.text)
+ setvbuf 0x080013e5 Thumb Code 70 setvbuf.o(.text)
+ _seterr 0x0800142d Thumb Code 20 stdio.o(.text)
+ _writebuf 0x08001441 Thumb Code 84 stdio.o(.text)
+ _fflush 0x08001495 Thumb Code 70 stdio.o(.text)
+ _deferredlazyseek 0x080014db Thumb Code 60 stdio.o(.text)
+ _initio 0x0800151d Thumb Code 210 initio.o(.text)
+ _terminateio 0x080015ef Thumb Code 56 initio.o(.text)
+ __cxa_finalize 0x08001655 Thumb Code 66 cxa_finalize.o(.text)
+ __rt_SIGPVFN 0x08001697 Thumb Code 14 defsig_pvfn_outer.o(.text)
+ __Heap_ProvideMemory 0x080016a5 Thumb Code 52 h1_extend.o(.text)
+ _ll_udiv10 0x080016d9 Thumb Code 138 lludiv10.o(.text)
+ isspace 0x08001763 Thumb Code 18 isspace.o(.text)
+ __lib_sel_fp_printf 0x08001775 Thumb Code 2 _printf_fp_dec.o(.text)
+ _printf_fp_dec_real 0x08001923 Thumb Code 620 _printf_fp_dec.o(.text)
+ _printf_fp_hex_real 0x08001b91 Thumb Code 756 _printf_fp_hex.o(.text)
+ _printf_cs_common 0x08001e8d Thumb Code 20 _printf_char.o(.text)
+ _printf_char 0x08001ea1 Thumb Code 16 _printf_char.o(.text)
+ _printf_string 0x08001eb1 Thumb Code 8 _printf_char.o(.text)
+ _printf_lcs_common 0x08001eb9 Thumb Code 20 _printf_wchar.o(.text)
+ _printf_wchar 0x08001ecd Thumb Code 16 _printf_wchar.o(.text)
+ _printf_wstring 0x08001edd Thumb Code 8 _printf_wchar.o(.text)
+ __vfscanf 0x08001ee5 Thumb Code 878 _scanf.o(.text)
+ _ftell_internal 0x08002259 Thumb Code 66 ftell.o(.text)
+ ftell 0x08002259 Thumb Code 0 ftell.o(.text)
+ _wcrtomb 0x0800229b Thumb Code 64 _wcrtomb.o(.text)
+ __sig_exit 0x080022db Thumb Code 10 defsig_exit.o(.text)
+ __rt_SIGRTRED 0x080022e5 Thumb Code 14 defsig_rtred_outer.o(.text)
+ __rt_SIGRTMEM 0x080022f3 Thumb Code 14 defsig_rtmem_outer.o(.text)
+ __rt_SIGPVFN_inner 0x08002301 Thumb Code 14 defsig_pvfn_inner.o(.text)
+ __rt_heap_escrow 0x08002331 Thumb Code 22 heapauxa.o(.text)
+ __rt_heap_expand 0x08002347 Thumb Code 52 heapauxa.o(.text)
+ _sys_exit 0x08002381 Thumb Code 8 sys_exit.o(.text)
+ __rt_ctype_table 0x0800238d Thumb Code 16 rt_ctype_table.o(.text)
+ __rt_locale 0x0800239d Thumb Code 8 rt_locale.o(.text)
+ __aeabi_errno_addr 0x080023a5 Thumb Code 8 rt_errno_addr.o(.text)
+ __errno 0x080023a5 Thumb Code 0 rt_errno_addr.o(.text)
+ __rt_errno_addr 0x080023a5 Thumb Code 0 rt_errno_addr.o(.text)
+ _printf_fp_infnan 0x080023ad Thumb Code 112 _printf_fp_infnan.o(.text)
+ _btod_etento 0x0800242d Thumb Code 216 bigflt0.o(.text)
+ __default_signal_display 0x08002509 Thumb Code 50 defsig_general.o(.text)
+ __rt_SIGRTRED_inner 0x0800253d Thumb Code 14 defsig_rtred_inner.o(.text)
+ __rt_SIGRTMEM_inner 0x08002571 Thumb Code 22 defsig_rtmem_inner.o(.text)
+ _ttywrch 0x080025c1 Thumb Code 14 sys_wrch.o(.text)
+ __I$use$semihosting 0x080025cf Thumb Code 0 use_no_semi.o(.text)
+ __use_no_semihosting_swi 0x080025cf Thumb Code 2 use_no_semi.o(.text)
+ __semihosting_library_function 0x080025d1 Thumb Code 0 indicate_semi.o(.text)
+ _btod_d2e 0x080025d1 Thumb Code 62 btod.o(CL$$btod_d2e)
+ _d2e_denorm_low 0x0800260f Thumb Code 70 btod.o(CL$$btod_d2e_denorm_low)
+ _d2e_norm_op1 0x08002655 Thumb Code 96 btod.o(CL$$btod_d2e_norm_op1)
+ __btod_div_common 0x080026b5 Thumb Code 696 btod.o(CL$$btod_div_common)
+ _e2e 0x080029ed Thumb Code 198 btod.o(CL$$btod_e2e)
+ _btod_ediv 0x08002ab3 Thumb Code 40 btod.o(CL$$btod_ediv)
+ _btod_emul 0x08002adb Thumb Code 40 btod.o(CL$$btod_emul)
+ __btod_mult_common 0x08002b03 Thumb Code 580 btod.o(CL$$btod_mult_common)
+ main 0x08002d47 Thumb Code 18 retarget.o(i.$Sub$$main)
+ HAL_DMA_Abort_IT 0x08002d61 Thumb Code 36 stm32f4xx_hal_dma.o(i.HAL_DMA_Abort_IT)
+ HAL_GPIO_Init 0x08002d85 Thumb Code 494 stm32f4xx_hal_gpio.o(i.HAL_GPIO_Init)
+ HAL_GetTick 0x08002f89 Thumb Code 6 stm32f4xx_hal.o(i.HAL_GetTick)
+ HAL_IncTick 0x08002f95 Thumb Code 10 stm32f4xx_hal.o(i.HAL_IncTick)
+ HAL_Init 0x08002fa5 Thumb Code 48 stm32f4xx_hal.o(i.HAL_Init)
+ HAL_InitTick 0x08002fd9 Thumb Code 142 hal_tick.o(i.HAL_InitTick)
+ HAL_MspInit 0x0800308d Thumb Code 2 stm32f4xx_hal_msp_template.o(i.HAL_MspInit)
+ HAL_NVIC_SetPriorityGrouping 0x08003091 Thumb Code 30 stm32f4xx_hal_cortex.o(i.HAL_NVIC_SetPriorityGrouping)
+ HAL_RCC_ClockConfig 0x080030b5 Thumb Code 388 stm32f4xx_hal_rcc.o(i.HAL_RCC_ClockConfig)
+ HAL_RCC_GetPCLK1Freq 0x0800324d Thumb Code 34 stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq)
+ HAL_RCC_GetPCLK2Freq 0x0800327d Thumb Code 34 stm32f4xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq)
+ HAL_RCC_GetSysClockFreq 0x080032ad Thumb Code 132 stm32f4xx_hal_rcc.o(i.HAL_RCC_GetSysClockFreq)
+ HAL_RCC_OscConfig 0x08003341 Thumb Code 836 stm32f4xx_hal_rcc.o(i.HAL_RCC_OscConfig)
+ HAL_TIM_OC_Init 0x080036ad Thumb Code 54 stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Init)
+ HAL_TIM_OC_MspInit 0x080036e3 Thumb Code 2 stm32f4xx_hal_tim.o(i.HAL_TIM_OC_MspInit)
+ HAL_TIM_OC_Start 0x080036e5 Thumb Code 54 stm32f4xx_hal_tim.o(i.HAL_TIM_OC_Start)
+ HAL_UART_ErrorCallback 0x0800371b Thumb Code 48 serial_api.o(i.HAL_UART_ErrorCallback)
+ HAL_UART_IRQHandler 0x0800374d Thumb Code 650 stm32f4xx_hal_uart.o(i.HAL_UART_IRQHandler)
+ HAL_UART_Init 0x080039dd Thumb Code 98 stm32f4xx_hal_uart.o(i.HAL_UART_Init)
+ HAL_UART_MspInit 0x08003a3f Thumb Code 2 stm32f4xx_hal_uart.o(i.HAL_UART_MspInit)
+ HAL_UART_RxCpltCallback 0x08003a41 Thumb Code 2 stm32f4xx_hal_uart.o(i.HAL_UART_RxCpltCallback)
+ HAL_UART_TxCpltCallback 0x08003a43 Thumb Code 18 serial_api.o(i.HAL_UART_TxCpltCallback)
+ SetSysClock 0x08003a55 Thumb Code 122 system_stm32f4xx.o(i.SetSysClock)
+ Set_GPIO_Clock 0x08003ad9 Thumb Code 142 pinmap.o(i.Set_GPIO_Clock)
+ SystemCoreClockUpdate 0x08003ba9 Thumb Code 112 system_stm32f4xx.o(i.SystemCoreClockUpdate)
+ SystemInit 0x08003c2d Thumb Code 98 system_stm32f4xx.o(i.SystemInit)
+ TIM_Base_SetConfig 0x08003cb5 Thumb Code 132 stm32f4xx_hal_tim.o(i.TIM_Base_SetConfig)
+ mbed::FileHandle::flen() 0x0800409d Thumb Code 82 filelike.o(i._ZN4mbed10FileHandle4flenEv)
+ mbed::FileHandle::lock() 0x080040ef Thumb Code 2 filelike.o(i._ZN4mbed10FileHandle4lockEv)
+ mbed::FileHandle::unlock() 0x080040f1 Thumb Code 2 filelike.o(i._ZN4mbed10FileHandle6unlockEv)
+ mbed::FileHandle::~FileHandle() 0x080040f5 Thumb Code 0 retarget.o(i._ZN4mbed10FileHandleD2Ev)
+ mbed::FileHandle::~FileHandle__sub_object() 0x080040f5 Thumb Code 96 retarget.o(i._ZN4mbed10FileHandleD2Ev)
+ mbed::SerialBase::_base_putc(int) 0x08004169 Thumb Code 14 serialbase.o(i._ZN4mbed10SerialBase10_base_putcEi)
+ mbed::SerialBase::_irq_handler(unsigned, SerialIrq) 0x08004177 Thumb Code 22 serialbase.o(i._ZN4mbed10SerialBase12_irq_handlerEj9SerialIrq)
+ mbed::SerialBase::interrupt_handler_asynch() 0x0800418d Thumb Code 60 serialbase.o(i._ZN4mbed10SerialBase24interrupt_handler_asynchEv)
+ mbed::SerialBase::baud(int) 0x080041c9 Thumb Code 40 serialbase.o(i._ZN4mbed10SerialBase4baudEi)
+ mbed::SerialBase::lock() 0x080041f1 Thumb Code 2 serialbase.o(i._ZN4mbed10SerialBase4lockEv)
+ mbed::SerialBase::unlock() 0x080041f3 Thumb Code 2 serialbase.o(i._ZN4mbed10SerialBase6unlockEv)
+ mbed::SerialBase::SerialBase(PinName, PinName) 0x080041f5 Thumb Code 132 serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_)
+ mbed::SerialBase::SerialBase__sub_object(PinName, PinName) 0x080041f5 Thumb Code 0 serialbase.o(i._ZN4mbed10SerialBaseC1E7PinNameS1_)
+ mbed::mbed_set_unbuffered_stream(std::__FILE*) 0x08004291 Thumb Code 6 retarget.o(i._ZN4mbed26mbed_set_unbuffered_streamEPSt6__FILE)
+ mbed::Serial::lock() 0x08004297 Thumb Code 2 serial.o(i._ZN4mbed6Serial4lockEv)
+ mbed::Serial::unlock() 0x08004299 Thumb Code 2 serial.o(i._ZN4mbed6Serial6unlockEv)
+ mbed::Serial::Serial(PinName, PinName, const char*) 0x0800429d Thumb Code 36 serial.o(i._ZN4mbed6SerialC1E7PinNameS1_PKc)
+ mbed::Serial::Serial__sub_object(PinName, PinName, const char*) 0x0800429d Thumb Code 0 serial.o(i._ZN4mbed6SerialC1E7PinNameS1_PKc)
+ mbed::Serial::~Serial() 0x080042c5 Thumb Code 30 serial.o(i._ZN4mbed6SerialD1Ev)
+ mbed::Serial::~Serial__sub_object() 0x080042c5 Thumb Code 0 serial.o(i._ZN4mbed6SerialD1Ev)
+ mbed::Stream::flen() 0x080042ed Thumb Code 4 stream.o(i._ZN4mbed6Stream4flenEv)
+ mbed::Stream::close() 0x080042f1 Thumb Code 4 stream.o(i._ZN4mbed6Stream5closeEv)
+ mbed::Stream::lseek(long, int) 0x080042f5 Thumb Code 4 stream.o(i._ZN4mbed6Stream5lseekEli)
+ mbed::Stream::write(const void*, unsigned) 0x080042f9 Thumb Code 60 stream.o(i._ZN4mbed6Stream5writeEPKvj)
+ mbed::Stream::isatty() 0x08004335 Thumb Code 4 stream.o(i._ZN4mbed6Stream6isattyEv)
+ mbed::Stream::printf(const char*, ...) 0x08004339 Thumb Code 50 stream.o(i._ZN4mbed6Stream6printfEPKcz)
+ mbed::Stream::Stream__sub_object(const char*) 0x0800436d Thumb Code 52 stream.o(i._ZN4mbed6StreamC2EPKc)
+ mbed::Stream::~Stream() 0x080043ad Thumb Code 0 stream.o(i._ZN4mbed6StreamD2Ev)
+ mbed::Stream::~Stream__sub_object() 0x080043ad Thumb Code 28 stream.o(i._ZN4mbed6StreamD2Ev)
+ mbed::FileBase::getPathType() 0x080043cd Thumb Code 4 filebase.o(i._ZN4mbed8FileBase11getPathTypeEv)
+ mbed::FileBase::lookup(const char*, unsigned) 0x080043d1 Thumb Code 90 filebase.o(i._ZN4mbed8FileBase6lookupEPKcj)
+ mbed::FileBase::FileBase(const char*, mbed::PathType) 0x0800443d Thumb Code 50 filebase.o(i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE)
+ mbed::FileBase::FileBase__sub_object(const char*, mbed::PathType) 0x0800443d Thumb Code 0 filebase.o(i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE)
+ mbed::FileBase::~FileBase() 0x0800447d Thumb Code 60 filebase.o(i._ZN4mbed8FileBaseD1Ev)
+ mbed::FileBase::~FileBase__sub_object() 0x0800447d Thumb Code 0 filebase.o(i._ZN4mbed8FileBaseD1Ev)
+ mbed::FileLike::FileLike__sub_object(const char*) 0x080044c5 Thumb Code 26 filelike.o(i._ZN4mbed8FileLikeC2EPKc)
+ mbed::FileLike::~FileLike() 0x080044e9 Thumb Code 0 filelike.o(i._ZN4mbed8FileLikeD2Ev)
+ mbed::FileLike::~FileLike__sub_object() 0x080044e9 Thumb Code 18 filelike.o(i._ZN4mbed8FileLikeD2Ev)
+ mbed::FilePath::fileSystem() 0x080044fb Thumb Code 24 filepath.o(i._ZN4mbed8FilePath10fileSystemEv)
+ mbed::FilePath::file() 0x08004513 Thumb Code 28 filepath.o(i._ZN4mbed8FilePath4fileEv)
+ mbed::FilePath::exists() 0x0800452f Thumb Code 10 filepath.o(i._ZN4mbed8FilePath6existsEv)
+ mbed::FilePath::isFile() 0x08004539 Thumb Code 24 filepath.o(i._ZN4mbed8FilePath6isFileEv)
+ mbed::FilePath::fileName() 0x08004551 Thumb Code 4 filepath.o(i._ZN4mbed8FilePath8fileNameEv)
+ mbed::FilePath::FilePath(const char*) 0x08004555 Thumb Code 64 filepath.o(i._ZN4mbed8FilePathC1EPKc)
+ mbed::FilePath::FilePath__sub_object(const char*) 0x08004555 Thumb Code 0 filepath.o(i._ZN4mbed8FilePathC1EPKc)
+ thunk{-184} to mbed::Serial::lock() 0x08004595 Thumb Code 2 serial.o(i._ZThn184_N4mbed6Serial4lockEv)
+ thunk{-184} to mbed::Serial::_putc(int) 0x08004597 Thumb Code 6 serial.o(i._ZThn184_N4mbed6Serial5_putcEi)
+ thunk{-184} to mbed::Serial::unlock() 0x0800459d Thumb Code 2 serial.o(i._ZThn184_N4mbed6Serial6unlockEv)
+ __ARM_fpclassify 0x0800459f Thumb Code 48 fpclassify.o(i.__ARM_fpclassify)
+ __NVIC_SetVector 0x080045d1 Thumb Code 48 cmsis_nvic.o(i.__NVIC_SetVector)
+ __aeabi_vec_ctor_nocookie_nodtor 0x08004605 Thumb Code 36 aeabi_vec_ctor_nocookie_nodtor.o(i.__aeabi_vec_ctor_nocookie_nodtor)
+ __cxa_pure_virtual 0x08004629 Thumb Code 6 pure_virt.o(i.__cxa_pure_virtual)
+ __user_setup_stackheap 0x0800466d Thumb Code 10 sys.o(i.__user_setup_stackheap)
+ _is_digit 0x0800467d Thumb Code 14 __printf_wp.o(i._is_digit)
+ _sys_close 0x0800468d Thumb Code 40 retarget.o(i._sys_close)
+ _sys_flen 0x080046b9 Thumb Code 34 retarget.o(i._sys_flen)
+ _sys_istty 0x080046e1 Thumb Code 34 retarget.o(i._sys_istty)
+ _sys_open 0x08004709 Thumb Code 400 retarget.o(i._sys_open)
+ _sys_seek 0x080048c1 Thumb Code 36 retarget.o(i._sys_seek)
+ _sys_write 0x080048e9 Thumb Code 82 retarget.o(i._sys_write)
+ core_util_critical_section_enter 0x08004949 Thumb Code 70 mbed_critical.o(i.core_util_critical_section_enter)
+ core_util_critical_section_exit 0x080049f1 Thumb Code 60 mbed_critical.o(i.core_util_critical_section_exit)
+ error 0x08004a65 Thumb Code 18 mbed_error.o(i.error)
+ exit 0x08004a79 Thumb Code 24 retarget.o(i.exit)
+ fputc 0x08004a99 Thumb Code 26 fputc.o(i.fputc)
+ gpio_dir 0x08004ab5 Thumb Code 54 gpio_api.o(i.gpio_dir)
+ gpio_init 0x08004b41 Thumb Code 58 gpio_api.o(i.gpio_init)
+ gpio_init_out 0x08004b7d Thumb Code 70 mbed_gpio.o(i.gpio_init_out)
+ gpio_init_out_ex 0x08004bc9 Thumb Code 80 mbed_gpio.o(i.gpio_init_out_ex)
+ gpio_mode 0x08004c71 Thumb Code 8 gpio_api.o(i.gpio_mode)
+ $Super$$main 0x08004cfd Thumb Code 158 main.o(i.main)
+ mbed_assert_internal 0x08004e1d Thumb Code 32 mbed_assert.o(i.mbed_assert_internal)
+ mbed_die 0x08004e71 Thumb Code 84 mbed_board.o(i.mbed_die)
+ mbed_error_printf 0x08004f1d Thumb Code 74 mbed_board.o(i.mbed_error_printf)
+ mbed_error_vfprintf 0x08004f71 Thumb Code 68 mbed_board.o(i.mbed_error_vfprintf)
+ mbed_main 0x08004fbd Thumb Code 2 retarget.o(i.mbed_main)
+ mbed_sdk_init 0x08004fbf Thumb Code 14 mbed_overrides.o(i.mbed_sdk_init)
+ pin_function 0x08004fcd Thumb Code 80 pinmap.o(i.pin_function)
+ pin_mode 0x0800506d Thumb Code 64 pinmap.o(i.pin_mode)
+ pinmap_merge 0x080050f9 Thumb Code 38 mbed_pinmap_common.o(i.pinmap_merge)
+ pinmap_peripheral 0x08005135 Thumb Code 62 mbed_pinmap_common.o(i.pinmap_peripheral)
+ pinmap_pinout 0x08005195 Thumb Code 72 mbed_pinmap_common.o(i.pinmap_pinout)
+ serial_baud 0x080051f1 Thumb Code 6 serial_api.o(i.serial_baud)
+ serial_init 0x080051f9 Thumb Code 310 serial_api.o(i.serial_init)
+ serial_irq_handler 0x080053a9 Thumb Code 14 serial_api.o(i.serial_irq_handler)
+ serial_irq_handler_asynch 0x080053c1 Thumb Code 344 serial_api.o(i.serial_irq_handler_asynch)
+ serial_putc 0x0800551d Thumb Code 30 serial_api.o(i.serial_putc)
+ ticker_irq_handler 0x08005541 Thumb Code 78 mbed_ticker_api.o(i.ticker_irq_handler)
+ timer_irq_handler 0x08005591 Thumb Code 90 hal_tick.o(i.timer_irq_handler)
+ us_ticker_clear_interrupt 0x080055f5 Thumb Code 12 us_ticker.o(i.us_ticker_clear_interrupt)
+ us_ticker_disable_interrupt 0x08005605 Thumb Code 14 us_ticker.o(i.us_ticker_disable_interrupt)
+ us_ticker_init 0x08005619 Thumb Code 26 us_ticker.o(i.us_ticker_init)
+ us_ticker_irq_handler 0x08005641 Thumb Code 6 mbed_us_ticker_api.o(i.us_ticker_irq_handler)
+ us_ticker_read 0x0800564d Thumb Code 30 us_ticker.o(i.us_ticker_read)
+ us_ticker_set_interrupt 0x0800567d Thumb Code 16 us_ticker.o(i.us_ticker_set_interrupt)
+ wait 0x08005691 Thumb Code 36 mbed_wait_api.o(i.wait)
+ wait_ms 0x080056b9 Thumb Code 28 mbed_wait_api.o(i.wait_ms)
+ _get_lc_numeric 0x080056d5 Thumb Code 44 lc_numeric_c.o(locale$$code)
+ _get_lc_ctype 0x08005701 Thumb Code 44 lc_ctype_c.o(locale$$code)
+ SingletonPtr<PlatformMutex>::operator ->() 0x0800572d Thumb Code 36 filebase.o(t._ZN12SingletonPtrI13PlatformMutexEptEv)
+ CThunk<mbed::SerialBase>::trampoline(mbed::SerialBase*, void*, void(mbed::SerialBase::**)(void*)) 0x08005759 Thumb Code 54 serialbase.o(t._ZN6CThunkIN4mbed10SerialBaseEE10trampolineEPS1_PvPMS1_FvS4_E)
+ _fp_init 0x0800578f Thumb Code 10 fpinit.o(x$fpl$fpinit)
+ __fplib_config_fpu_vfp 0x08005797 Thumb Code 0 fpinit.o(x$fpl$fpinit)
+ __fplib_config_pureend_doubles 0x08005797 Thumb Code 0 fpinit.o(x$fpl$fpinit)
+ _printf_fp_dec 0x08005799 Thumb Code 4 printf1.o(x$fpl$printf1)
+ _printf_fp_hex 0x0800579d Thumb Code 4 printf2.o(x$fpl$printf2)
+ PinMap_UART_TX 0x080057a0 Data 72 peripheralpins.o(.constdata)
+ __I$use$fp 0x080057a0 Number 0 usenofp.o(x$fpl$usenofp)
+ PinMap_UART_RX 0x080057e8 Data 72 peripheralpins.o(.constdata)
+ AHBPrescTable 0x08005830 Data 16 system_stm32f4xx.o(.constdata)
+ APBAHBPrescTable 0x08005874 Data 16 stm32f4xx_hal_rcc.o(.constdata)
+ __stdin_name 0x080058a0 Data 7 retarget.o(.constdata)
+ __stdout_name 0x080058a7 Data 8 retarget.o(.constdata)
+ __stderr_name 0x080058af Data 8 retarget.o(.constdata)
+ vtable for mbed::FileHandle 0x080059c8 Data 52 retarget.o(.constdata__ZTVN4mbed10FileHandleE)
+ vtable for mbed::SerialBase 0x080059fc Data 24 serialbase.o(.constdata__ZTVN4mbed10SerialBaseE)
+ vtable for mbed::Serial 0x08005a14 Data 108 serial.o(.constdata__ZTVN4mbed6SerialE)
+ vtable for mbed::Stream 0x08005a80 Data 76 stream.o(.constdata__ZTVN4mbed6StreamE)
+ vtable for mbed::FileBase 0x08005acc Data 16 filebase.o(.constdata__ZTVN4mbed8FileBaseE)
+ vtable for mbed::FileLike 0x08005adc Data 68 filelike.o(.constdata__ZTVN4mbed8FileLikeE)
+ SingletonPtr<PlatformMutex>::get()::string 0x08005b20 Data 20 filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs)
+ SingletonPtr<PlatformMutex>::get()::string (instance 2) 0x08005b34 Data 28 filebase.o(.constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0)
+ Region$$Table$$Base 0x08005b50 Number 0 anon$$obj.o(Region$$Table)
+ Region$$Table$$Limit 0x08005b70 Number 0 anon$$obj.o(Region$$Table)
+ __ctype 0x08005b99 Data 0 lc_ctype_c.o(locale$$data)
+ SHT$$INIT_ARRAY$$Base 0x08005c9c Number 0 main.o(.init_array)
+ SHT$$INIT_ARRAY$$Limit 0x08005ca0 Number 0 init_aeabi.o(.init_array)
+ PreviousVal 0x20000194 Data 4 hal_tick.o(.data)
+ SystemCoreClock 0x20000198 Data 4 system_stm32f4xx.o(.data)
+ stdio_uart_inited 0x2000019c Data 4 serial_api.o(.data)
+ uwTick 0x200001a4 Data 4 stm32f4xx_hal.o(.data)
+ mbed::FileBase::_head 0x200001ac Data 4 filebase.o(.data)
+ mbed::FileBase::_mutex 0x200001b0 Data 8 filebase.o(.data)
+ __aeabi_stdin 0x200001d0 Data 4 stdio_streams.o(.data)
+ __aeabi_stdout 0x200001d4 Data 4 stdio_streams.o(.data)
+ __aeabi_stderr 0x200001d8 Data 4 stdio_streams.o(.data)
+ TimMasterHandle 0x200001e0 Data 60 hal_tick.o(.bss)
+ stdio_uart 0x2000043c Data 76 serial_api.o(.bss)
+ myled 0x20000504 Data 16 main.o(.bss)
+ pc 0x20000514 Data 212 main.o(.bss)
+ __stdin 0x200005e8 Data 84 stdio_streams.o(.bss)
+ __stdout 0x2000063c Data 84 stdio_streams.o(.bss)
+ __stderr 0x20000690 Data 84 stdio_streams.o(.bss)
+ Image$$RW_IRAM1$$ZI$$Limit 0x20000704 Number 0 anon$$obj.o ABSOLUTE
+
+
+
+==============================================================================
+
+Memory Map of the image
+
+ Image Entry point : 0x08000195
+
+ Load Region LR_IROM1 (Base: 0x08000000, Size: 0x00005cec, Max: 0x00080000, ABSOLUTE)
+
+ Execution Region ER_IROM1 (Base: 0x08000000, Size: 0x00005ca0, Max: 0x00080000, ABSOLUTE)
+
+ Base Addr Size Type Attr Idx E Section Name Object
+
+ 0x08000000 0x00000194 Data RO 7784 RESET startup_stm32f401xe.o
+ 0x08000194 0x00000008 Code RO 11901 * !!!main c_w.l(__main.o)
+ 0x0800019c 0x00000034 Code RO 12592 !!!scatter c_w.l(__scatter.o)
+ 0x080001d0 0x0000001a Code RO 12594 !!handler_copy c_w.l(__scatter_copy.o)
+ 0x080001ea 0x00000002 PAD
+ 0x080001ec 0x0000001c Code RO 12596 !!handler_zi c_w.l(__scatter_zi.o)
+ 0x08000208 0x00000000 Code RO 11835 .ARM.Collect$$_printf_percent$$00000000 c_w.l(_printf_percent.o)
+ 0x08000208 0x00000006 Code RO 12085 .ARM.Collect$$_printf_percent$$00000001 c_w.l(_printf_n.o)
+ 0x0800020e 0x00000006 Code RO 11833 .ARM.Collect$$_printf_percent$$00000002 c_w.l(_printf_p.o)
+ 0x08000214 0x00000006 Code RO 12090 .ARM.Collect$$_printf_percent$$00000003 c_w.l(_printf_f.o)
+ 0x0800021a 0x00000006 Code RO 12091 .ARM.Collect$$_printf_percent$$00000004 c_w.l(_printf_e.o)
+ 0x08000220 0x00000006 Code RO 12092 .ARM.Collect$$_printf_percent$$00000005 c_w.l(_printf_g.o)
+ 0x08000226 0x00000006 Code RO 12093 .ARM.Collect$$_printf_percent$$00000006 c_w.l(_printf_a.o)
+ 0x0800022c 0x0000000a Code RO 12098 .ARM.Collect$$_printf_percent$$00000007 c_w.l(_printf_ll.o)
+ 0x08000236 0x00000006 Code RO 12088 .ARM.Collect$$_printf_percent$$00000008 c_w.l(_printf_i.o)
+ 0x0800023c 0x00000006 Code RO 12089 .ARM.Collect$$_printf_percent$$00000009 c_w.l(_printf_d.o)
+ 0x08000242 0x00000006 Code RO 11834 .ARM.Collect$$_printf_percent$$0000000A c_w.l(_printf_u.o)
+ 0x08000248 0x00000006 Code RO 12087 .ARM.Collect$$_printf_percent$$0000000B c_w.l(_printf_o.o)
+ 0x0800024e 0x00000006 Code RO 12086 .ARM.Collect$$_printf_percent$$0000000C c_w.l(_printf_x.o)
+ 0x08000254 0x00000006 Code RO 12095 .ARM.Collect$$_printf_percent$$0000000D c_w.l(_printf_lli.o)
+ 0x0800025a 0x00000006 Code RO 12096 .ARM.Collect$$_printf_percent$$0000000E c_w.l(_printf_lld.o)
+ 0x08000260 0x00000006 Code RO 12097 .ARM.Collect$$_printf_percent$$0000000F c_w.l(_printf_llu.o)
+ 0x08000266 0x00000006 Code RO 12102 .ARM.Collect$$_printf_percent$$00000010 c_w.l(_printf_llo.o)
+ 0x0800026c 0x00000006 Code RO 12103 .ARM.Collect$$_printf_percent$$00000011 c_w.l(_printf_llx.o)
+ 0x08000272 0x0000000a Code RO 12099 .ARM.Collect$$_printf_percent$$00000012 c_w.l(_printf_l.o)
+ 0x0800027c 0x00000006 Code RO 12083 .ARM.Collect$$_printf_percent$$00000013 c_w.l(_printf_c.o)
+ 0x08000282 0x00000006 Code RO 12084 .ARM.Collect$$_printf_percent$$00000014 c_w.l(_printf_s.o)
+ 0x08000288 0x00000006 Code RO 12100 .ARM.Collect$$_printf_percent$$00000015 c_w.l(_printf_lc.o)
+ 0x0800028e 0x00000006 Code RO 12101 .ARM.Collect$$_printf_percent$$00000016 c_w.l(_printf_ls.o)
+ 0x08000294 0x00000004 Code RO 12094 .ARM.Collect$$_printf_percent$$00000017 c_w.l(_printf_percent_end.o)
+ 0x08000298 0x00000002 Code RO 12444 .ARM.Collect$$libinit$$00000000 c_w.l(libinit.o)
+ 0x0800029a 0x00000004 Code RO 12157 .ARM.Collect$$libinit$$00000001 c_w.l(libinit2.o)
+ 0x0800029e 0x00000000 Code RO 12160 .ARM.Collect$$libinit$$00000004 c_w.l(libinit2.o)
+ 0x0800029e 0x00000008 Code RO 12161 .ARM.Collect$$libinit$$00000005 c_w.l(libinit2.o)
+ 0x080002a6 0x00000000 Code RO 12163 .ARM.Collect$$libinit$$0000000A c_w.l(libinit2.o)
+ 0x080002a6 0x00000000 Code RO 12165 .ARM.Collect$$libinit$$0000000C c_w.l(libinit2.o)
+ 0x080002a6 0x00000000 Code RO 12167 .ARM.Collect$$libinit$$0000000E c_w.l(libinit2.o)
+ 0x080002a6 0x00000006 Code RO 12168 .ARM.Collect$$libinit$$0000000F c_w.l(libinit2.o)
+ 0x080002ac 0x00000000 Code RO 12170 .ARM.Collect$$libinit$$00000011 c_w.l(libinit2.o)
+ 0x080002ac 0x0000000c Code RO 12171 .ARM.Collect$$libinit$$00000012 c_w.l(libinit2.o)
+ 0x080002b8 0x00000000 Code RO 12172 .ARM.Collect$$libinit$$00000013 c_w.l(libinit2.o)
+ 0x080002b8 0x00000000 Code RO 12174 .ARM.Collect$$libinit$$00000015 c_w.l(libinit2.o)
+ 0x080002b8 0x0000000a Code RO 12175 .ARM.Collect$$libinit$$00000016 c_w.l(libinit2.o)
+ 0x080002c2 0x00000000 Code RO 12176 .ARM.Collect$$libinit$$00000017 c_w.l(libinit2.o)
+ 0x080002c2 0x00000000 Code RO 12178 .ARM.Collect$$libinit$$00000019 c_w.l(libinit2.o)
+ 0x080002c2 0x00000000 Code RO 12180 .ARM.Collect$$libinit$$0000001B c_w.l(libinit2.o)
+ 0x080002c2 0x00000000 Code RO 12182 .ARM.Collect$$libinit$$0000001D c_w.l(libinit2.o)
+ 0x080002c2 0x00000000 Code RO 12184 .ARM.Collect$$libinit$$0000001F c_w.l(libinit2.o)
+ 0x080002c2 0x00000000 Code RO 12186 .ARM.Collect$$libinit$$00000021 c_w.l(libinit2.o)
+ 0x080002c2 0x00000000 Code RO 12188 .ARM.Collect$$libinit$$00000023 c_w.l(libinit2.o)
+ 0x080002c2 0x00000004 Code RO 12189 .ARM.Collect$$libinit$$00000024 c_w.l(libinit2.o)
+ 0x080002c6 0x00000000 Code RO 12190 .ARM.Collect$$libinit$$00000025 c_w.l(libinit2.o)
+ 0x080002c6 0x00000000 Code RO 12194 .ARM.Collect$$libinit$$0000002C c_w.l(libinit2.o)
+ 0x080002c6 0x00000000 Code RO 12196 .ARM.Collect$$libinit$$0000002E c_w.l(libinit2.o)
+ 0x080002c6 0x00000000 Code RO 12198 .ARM.Collect$$libinit$$00000030 c_w.l(libinit2.o)
+ 0x080002c6 0x00000004 Code RO 12199 .ARM.Collect$$libinit$$00000031 c_w.l(libinit2.o)
+ 0x080002ca 0x00000000 Code RO 12200 .ARM.Collect$$libinit$$00000032 c_w.l(libinit2.o)
+ 0x080002ca 0x00000002 Code RO 12201 .ARM.Collect$$libinit$$00000033 c_w.l(libinit2.o)
+ 0x080002cc 0x00000000 Code RO 12337 .ARM.Collect$$libshutdown$$00000002 c_w.l(libshutdown2.o)
+ 0x080002cc 0x00000000 Code RO 12339 .ARM.Collect$$libshutdown$$00000004 c_w.l(libshutdown2.o)
+ 0x080002cc 0x00000000 Code RO 12023 .ARM.Collect$$rtentry$$00000000 c_w.l(__rtentry.o)
+ 0x080002cc 0x00000000 Code RO 12236 .ARM.Collect$$rtentry$$00000002 c_w.l(__rtentry2.o)
+ 0x080002cc 0x00000006 Code RO 12248 .ARM.Collect$$rtentry$$00000004 c_w.l(__rtentry4.o)
+ 0x080002d2 0x00000000 Code RO 12238 .ARM.Collect$$rtentry$$00000009 c_w.l(__rtentry2.o)
+ 0x080002d2 0x00000004 Code RO 12239 .ARM.Collect$$rtentry$$0000000A c_w.l(__rtentry2.o)
+ 0x080002d6 0x00000000 Code RO 12241 .ARM.Collect$$rtentry$$0000000C c_w.l(__rtentry2.o)
+ 0x080002d6 0x00000008 Code RO 12242 .ARM.Collect$$rtentry$$0000000D c_w.l(__rtentry2.o)
+ 0x080002de 0x00000002 PAD
+ 0x080002e0 0x00000000 Code RO 12254 .emb_text c_w.l(maybetermalloc1.o)
+ 0x080002e0 0x00000024 Code RO 7785 .text startup_stm32f401xe.o
+ 0x08000304 0x0000005e Code RO 11714 .text c_w.l(h1_alloc.o)
+ 0x08000362 0x0000004e Code RO 11716 .text c_w.l(h1_free.o)
+ 0x080003b0 0x00000024 Code RO 11772 .text c_w.l(vsprintf.o)
+ 0x080003d4 0x0000000a Code RO 11774 .text c_w.l(c89vfprintf.o)
+ 0x080003de 0x00000002 PAD
+ 0x080003e0 0x0000002c Code RO 11782 .text c_w.l(__2sprintf.o)
+ 0x0800040c 0x00000078 Code RO 11790 .text c_w.l(_printf_dec.o)
+ 0x08000484 0x00000094 Code RO 11810 .text c_w.l(_printf_hex_int_ll_ptr.o)
+ 0x08000518 0x00000188 Code RO 11830 .text c_w.l(__printf_flags_ss_wp.o)
+ 0x080006a0 0x0000003c Code RO 11838 .text c_w.l(__0sscanf.o)
+ 0x080006dc 0x0000014c Code RO 11840 .text c_w.l(_scanf_int.o)
+ 0x08000828 0x00000064 Code RO 11842 .text c_w.l(fflush.o)
+ 0x0800088c 0x000000ec Code RO 11856 .text c_w.l(fopen.o)
+ 0x08000978 0x00000014 Code RO 11858 .text c_w.l(setbuf.o)
+ 0x0800098c 0x0000004c Code RO 11866 .text c_w.l(fclose.o)
+ 0x080009d8 0x0000002e Code RO 11881 .text c_w.l(aeabi_atexit.o)
+ 0x08000a06 0x0000003e Code RO 11884 .text c_w.l(strlen.o)
+ 0x08000a44 0x00000096 Code RO 11886 .text c_w.l(strncmp.o)
+ 0x08000ada 0x00000064 Code RO 11888 .text c_w.l(rt_memcpy_w.o)
+ 0x08000b3e 0x0000004e Code RO 11890 .text c_w.l(rt_memclr_w.o)
+ 0x08000b8c 0x00000080 Code RO 11894 .text c_w.l(strcmpv7m.o)
+ 0x08000c0c 0x00000024 Code RO 11906 .text c_w.l(init_aeabi.o)
+ 0x08000c30 0x00000008 Code RO 12024 .text c_w.l(rt_heap_descriptor.o)
+ 0x08000c38 0x00000008 Code RO 12029 .text c_w.l(rt_ddtor_pointer_addr.o)
+ 0x08000c40 0x00000004 Code RO 12034 .text c_w.l(hguard.o)
+ 0x08000c44 0x0000008a Code RO 12036 .text c_w.l(init_alloc.o)
+ 0x08000cce 0x0000000e Code RO 12040 .text c_w.l(h1_init.o)
+ 0x08000cdc 0x0000004e Code RO 12054 .text c_w.l(_printf_pad.o)
+ 0x08000d2a 0x00000024 Code RO 12056 .text c_w.l(_printf_truncate.o)
+ 0x08000d4e 0x00000052 Code RO 12058 .text c_w.l(_printf_str.o)
+ 0x08000da0 0x000000b2 Code RO 12060 .text c_w.l(_printf_intcommon.o)
+ 0x08000e52 0x00000028 Code RO 12062 .text c_w.l(_printf_charcount.o)
+ 0x08000e7a 0x00000002 PAD
+ 0x08000e7c 0x00000030 Code RO 12064 .text c_w.l(_printf_char_common.o)
+ 0x08000eac 0x0000000a Code RO 12066 .text c_w.l(_sputc.o)
+ 0x08000eb6 0x00000002 PAD
+ 0x08000eb8 0x00000024 Code RO 12070 .text c_w.l(_printf_char_file.o)
+ 0x08000edc 0x000000bc Code RO 12072 .text c_w.l(_printf_wctomb.o)
+ 0x08000f98 0x0000007c Code RO 12075 .text c_w.l(_printf_longlong_dec.o)
+ 0x08001014 0x00000070 Code RO 12081 .text c_w.l(_printf_oct_int_ll.o)
+ 0x08001084 0x0000001c Code RO 12104 .text c_w.l(_chval.o)
+ 0x080010a0 0x0000002c Code RO 12110 .text c_w.l(scanf_char.o)
+ 0x080010cc 0x00000040 Code RO 12112 .text c_w.l(_sgetc.o)
+ 0x0800110c 0x00000008 Code RO 12122 .text c_w.l(ferror.o)
+ 0x08001114 0x000001d6 Code RO 12126 .text c_w.l(flsbuf.o)
+ 0x080012ea 0x00000002 PAD
+ 0x080012ec 0x000000f8 Code RO 12128 .text c_w.l(fseek.o)
+ 0x080013e4 0x00000046 Code RO 12130 .text c_w.l(setvbuf.o)
+ 0x0800142a 0x00000002 PAD
+ 0x0800142c 0x000000f0 Code RO 12132 .text c_w.l(stdio.o)
+ 0x0800151c 0x00000138 Code RO 12135 .text c_w.l(initio.o)
+ 0x08001654 0x00000042 Code RO 12143 .text c_w.l(cxa_finalize.o)
+ 0x08001696 0x0000000e Code RO 12146 .text c_w.l(defsig_pvfn_outer.o)
+ 0x080016a4 0x00000034 Code RO 12256 .text c_w.l(h1_extend.o)
+ 0x080016d8 0x0000008a Code RO 12260 .text c_w.l(lludiv10.o)
+ 0x08001762 0x00000012 Code RO 12262 .text c_w.l(isspace.o)
+ 0x08001774 0x0000041a Code RO 12264 .text c_w.l(_printf_fp_dec.o)
+ 0x08001b8e 0x00000002 PAD
+ 0x08001b90 0x000002fc Code RO 12266 .text c_w.l(_printf_fp_hex.o)
+ 0x08001e8c 0x0000002c Code RO 12271 .text c_w.l(_printf_char.o)
+ 0x08001eb8 0x0000002c Code RO 12275 .text c_w.l(_printf_wchar.o)
+ 0x08001ee4 0x00000374 Code RO 12277 .text c_w.l(_scanf.o)
+ 0x08002258 0x00000042 Code RO 12287 .text c_w.l(ftell.o)
+ 0x0800229a 0x00000040 Code RO 12313 .text c_w.l(_wcrtomb.o)
+ 0x080022da 0x0000000a Code RO 12315 .text c_w.l(defsig_exit.o)
+ 0x080022e4 0x0000000e Code RO 12317 .text c_w.l(defsig_rtred_outer.o)
+ 0x080022f2 0x0000000e Code RO 12321 .text c_w.l(defsig_rtmem_outer.o)
+ 0x08002300 0x00000030 Code RO 12325 .text c_w.l(defsig_pvfn_inner.o)
+ 0x08002330 0x00000050 Code RO 12329 .text c_w.l(heapauxa.o)
+ 0x08002380 0x0000000c Code RO 12370 .text c_w.l(sys_exit.o)
+ 0x0800238c 0x00000010 Code RO 12372 .text c_w.l(rt_ctype_table.o)
+ 0x0800239c 0x00000008 Code RO 12374 .text c_w.l(rt_locale.o)
+ 0x080023a4 0x00000008 Code RO 12384 .text c_w.l(rt_errno_addr.o)
+ 0x080023ac 0x00000080 Code RO 12391 .text c_w.l(_printf_fp_infnan.o)
+ 0x0800242c 0x000000dc Code RO 12393 .text c_w.l(bigflt0.o)
+ 0x08002508 0x00000032 Code RO 12427 .text c_w.l(defsig_general.o)
+ 0x0800253a 0x00000002 PAD
+ 0x0800253c 0x00000034 Code RO 12429 .text c_w.l(defsig_rtred_inner.o)
+ 0x08002570 0x00000050 Code RO 12431 .text c_w.l(defsig_rtmem_inner.o)
+ 0x080025c0 0x0000000e Code RO 12477 .text c_w.l(sys_wrch.o)
+ 0x080025ce 0x00000002 Code RO 12479 .text c_w.l(use_no_semi.o)
+ 0x080025d0 0x00000000 Code RO 12481 .text c_w.l(indicate_semi.o)
+ 0x080025d0 0x0000003e Code RO 12396 CL$$btod_d2e c_w.l(btod.o)
+ 0x0800260e 0x00000046 Code RO 12398 CL$$btod_d2e_denorm_low c_w.l(btod.o)
+ 0x08002654 0x00000060 Code RO 12397 CL$$btod_d2e_norm_op1 c_w.l(btod.o)
+ 0x080026b4 0x00000338 Code RO 12406 CL$$btod_div_common c_w.l(btod.o)
+ 0x080029ec 0x000000c6 Code RO 12403 CL$$btod_e2e c_w.l(btod.o)
+ 0x08002ab2 0x00000028 Code RO 12400 CL$$btod_ediv c_w.l(btod.o)
+ 0x08002ada 0x00000028 Code RO 12399 CL$$btod_emul c_w.l(btod.o)
+ 0x08002b02 0x00000244 Code RO 12405 CL$$btod_mult_common c_w.l(btod.o)
+ 0x08002d46 0x00000012 Code RO 10440 i.$Sub$$main retarget.o
+ 0x08002d58 0x00000008 Code RO 10826 i.<Func3> serialbase.o
+ 0x08002d60 0x00000024 Code RO 2460 i.HAL_DMA_Abort_IT stm32f4xx_hal_dma.o
+ 0x08002d84 0x00000204 Code RO 2912 i.HAL_GPIO_Init stm32f4xx_hal_gpio.o
+ 0x08002f88 0x0000000c Code RO 1476 i.HAL_GetTick stm32f4xx_hal.o
+ 0x08002f94 0x00000010 Code RO 1477 i.HAL_IncTick stm32f4xx_hal.o
+ 0x08002fa4 0x00000034 Code RO 1478 i.HAL_Init stm32f4xx_hal.o
+ 0x08002fd8 0x000000b4 Code RO 259 i.HAL_InitTick hal_tick.o
+ 0x0800308c 0x00000002 Code RO 4107 i.HAL_MspInit stm32f4xx_hal_msp_template.o
+ 0x0800308e 0x00000002 PAD
+ 0x08003090 0x00000024 Code RO 2129 i.HAL_NVIC_SetPriorityGrouping stm32f4xx_hal_cortex.o
+ 0x080030b4 0x00000198 Code RO 4695 i.HAL_RCC_ClockConfig stm32f4xx_hal_rcc.o
+ 0x0800324c 0x00000030 Code RO 4702 i.HAL_RCC_GetPCLK1Freq stm32f4xx_hal_rcc.o
+ 0x0800327c 0x00000030 Code RO 4703 i.HAL_RCC_GetPCLK2Freq stm32f4xx_hal_rcc.o
+ 0x080032ac 0x00000094 Code RO 4704 i.HAL_RCC_GetSysClockFreq stm32f4xx_hal_rcc.o
+ 0x08003340 0x0000036c Code RO 4707 i.HAL_RCC_OscConfig stm32f4xx_hal_rcc.o
+ 0x080036ac 0x00000036 Code RO 6020 i.HAL_TIM_OC_Init stm32f4xx_hal_tim.o
+ 0x080036e2 0x00000002 Code RO 6022 i.HAL_TIM_OC_MspInit stm32f4xx_hal_tim.o
+ 0x080036e4 0x00000036 Code RO 6023 i.HAL_TIM_OC_Start stm32f4xx_hal_tim.o
+ 0x0800371a 0x00000030 Code RO 1125 i.HAL_UART_ErrorCallback serial_api.o
+ 0x0800374a 0x00000002 PAD
+ 0x0800374c 0x00000290 Code RO 6817 i.HAL_UART_IRQHandler stm32f4xx_hal_uart.o
+ 0x080039dc 0x00000062 Code RO 6818 i.HAL_UART_Init stm32f4xx_hal_uart.o
+ 0x08003a3e 0x00000002 Code RO 6820 i.HAL_UART_MspInit stm32f4xx_hal_uart.o
+ 0x08003a40 0x00000002 Code RO 6824 i.HAL_UART_RxCpltCallback stm32f4xx_hal_uart.o
+ 0x08003a42 0x00000012 Code RO 1126 i.HAL_UART_TxCpltCallback serial_api.o
+ 0x08003a54 0x00000084 Code RO 371 i.SetSysClock system_stm32f4xx.o
+ 0x08003ad8 0x000000d0 Code RO 878 i.Set_GPIO_Clock pinmap.o
+ 0x08003ba8 0x00000084 Code RO 373 i.SystemCoreClockUpdate system_stm32f4xx.o
+ 0x08003c2c 0x00000088 Code RO 374 i.SystemInit system_stm32f4xx.o
+ 0x08003cb4 0x00000094 Code RO 6057 i.TIM_Base_SetConfig stm32f4xx_hal_tim.o
+ 0x08003d48 0x00000010 Code RO 6831 i.UART_DMAAbortOnError stm32f4xx_hal_uart.o
+ 0x08003d58 0x00000344 Code RO 6837 i.UART_SetConfig stm32f4xx_hal_uart.o
+ 0x0800409c 0x00000052 Code RO 8948 i._ZN4mbed10FileHandle4flenEv filelike.o
+ 0x080040ee 0x00000002 Code RO 8955 i._ZN4mbed10FileHandle4lockEv filelike.o
+ 0x080040f0 0x00000002 Code RO 8961 i._ZN4mbed10FileHandle6unlockEv filelike.o
+ 0x080040f2 0x00000002 PAD
+ 0x080040f4 0x00000074 Code RO 10442 i._ZN4mbed10FileHandleD2Ev retarget.o
+ 0x08004168 0x0000000e Code RO 10828 i._ZN4mbed10SerialBase10_base_putcEi serialbase.o
+ 0x08004176 0x00000016 Code RO 10834 i._ZN4mbed10SerialBase12_irq_handlerEj9SerialIrq serialbase.o
+ 0x0800418c 0x0000003c Code RO 10838 i._ZN4mbed10SerialBase24interrupt_handler_asynchEv serialbase.o
+ 0x080041c8 0x00000028 Code RO 10839 i._ZN4mbed10SerialBase4baudEi serialbase.o
+ 0x080041f0 0x00000002 Code RO 10840 i._ZN4mbed10SerialBase4lockEv serialbase.o
+ 0x080041f2 0x00000002 Code RO 10847 i._ZN4mbed10SerialBase6unlockEv serialbase.o
+ 0x080041f4 0x0000009c Code RO 10850 i._ZN4mbed10SerialBaseC1E7PinNameS1_ serialbase.o
+ 0x08004290 0x00000006 Code RO 10443 i._ZN4mbed26mbed_set_unbuffered_streamEPSt6__FILE retarget.o
+ 0x08004296 0x00000002 Code RO 10741 i._ZN4mbed6Serial4lockEv serial.o
+ 0x08004298 0x00000002 Code RO 10744 i._ZN4mbed6Serial6unlockEv serial.o
+ 0x0800429a 0x00000002 PAD
+ 0x0800429c 0x00000028 Code RO 10745 i._ZN4mbed6SerialC1E7PinNameS1_PKc serial.o
+ 0x080042c4 0x00000028 Code RO 10797 i._ZN4mbed6SerialD1Ev serial.o
+ 0x080042ec 0x00000004 Code RO 11197 i._ZN4mbed6Stream4flenEv stream.o
+ 0x080042f0 0x00000004 Code RO 11203 i._ZN4mbed6Stream5closeEv stream.o
+ 0x080042f4 0x00000004 Code RO 11205 i._ZN4mbed6Stream5lseekEli stream.o
+ 0x080042f8 0x0000003c Code RO 11207 i._ZN4mbed6Stream5writeEPKvj stream.o
+ 0x08004334 0x00000004 Code RO 11208 i._ZN4mbed6Stream6isattyEv stream.o
+ 0x08004338 0x00000032 Code RO 11209 i._ZN4mbed6Stream6printfEPKcz stream.o
+ 0x0800436a 0x00000002 PAD
+ 0x0800436c 0x00000040 Code RO 11212 i._ZN4mbed6StreamC2EPKc stream.o
+ 0x080043ac 0x00000020 Code RO 11214 i._ZN4mbed6StreamD2Ev stream.o
+ 0x080043cc 0x00000004 Code RO 8829 i._ZN4mbed8FileBase11getPathTypeEv filebase.o
+ 0x080043d0 0x0000006c Code RO 8831 i._ZN4mbed8FileBase6lookupEPKcj filebase.o
+ 0x0800443c 0x00000040 Code RO 8833 i._ZN4mbed8FileBaseC1EPKcNS_8PathTypeE filebase.o
+ 0x0800447c 0x00000048 Code RO 8835 i._ZN4mbed8FileBaseD1Ev filebase.o
+ 0x080044c4 0x00000024 Code RO 8913 i._ZN4mbed8FileLikeC2EPKc filelike.o
+ 0x080044e8 0x00000012 Code RO 8915 i._ZN4mbed8FileLikeD2Ev filelike.o
+ 0x080044fa 0x00000018 Code RO 8988 i._ZN4mbed8FilePath10fileSystemEv filepath.o
+ 0x08004512 0x0000001c Code RO 8990 i._ZN4mbed8FilePath4fileEv filepath.o
+ 0x0800452e 0x0000000a Code RO 8991 i._ZN4mbed8FilePath6existsEv filepath.o
+ 0x08004538 0x00000018 Code RO 8992 i._ZN4mbed8FilePath6isFileEv filepath.o
+ 0x08004550 0x00000004 Code RO 8993 i._ZN4mbed8FilePath8fileNameEv filepath.o
+ 0x08004554 0x00000040 Code RO 8994 i._ZN4mbed8FilePathC1EPKc filepath.o
+ 0x08004594 0x00000002 Code RO 10746 i._ZThn184_N4mbed6Serial4lockEv serial.o
+ 0x08004596 0x00000006 Code RO 10748 i._ZThn184_N4mbed6Serial5_putcEi serial.o
+ 0x0800459c 0x00000002 Code RO 10749 i._ZThn184_N4mbed6Serial6unlockEv serial.o
+ 0x0800459e 0x00000030 Code RO 12467 i.__ARM_fpclassify m_wm.l(fpclassify.o)
+ 0x080045ce 0x00000002 PAD
+ 0x080045d0 0x00000034 Code RO 5 i.__NVIC_SetVector cmsis_nvic.o
+ 0x08004604 0x00000024 Code RO 12018 i.__aeabi_vec_ctor_nocookie_nodtor cpprt_w.l(aeabi_vec_ctor_nocookie_nodtor.o)
+ 0x08004628 0x00000006 Code RO 11909 i.__cxa_pure_virtual cpprt_w.l(pure_virt.o)
+ 0x0800462e 0x00000002 PAD
+ 0x08004630 0x0000003c Code RO 11601 i.__sti___8_main_cpp_myled main.o
+ 0x0800466c 0x00000010 Code RO 7789 i.__user_setup_stackheap sys.o
+ 0x0800467c 0x0000000e Code RO 11823 i._is_digit c_w.l(__printf_wp.o)
+ 0x0800468a 0x00000002 PAD
+ 0x0800468c 0x0000002c Code RO 10450 i._sys_close retarget.o
+ 0x080046b8 0x00000028 Code RO 10453 i._sys_flen retarget.o
+ 0x080046e0 0x00000028 Code RO 10454 i._sys_istty retarget.o
+ 0x08004708 0x000001b8 Code RO 10455 i._sys_open retarget.o
+ 0x080048c0 0x00000028 Code RO 10457 i._sys_seek retarget.o
+ 0x080048e8 0x00000060 Code RO 10458 i._sys_write retarget.o
+ 0x08004948 0x000000a8 Code RO 9785 i.core_util_critical_section_enter mbed_critical.o
+ 0x080049f0 0x00000074 Code RO 9786 i.core_util_critical_section_exit mbed_critical.o
+ 0x08004a64 0x00000012 Code RO 9886 i.error mbed_error.o
+ 0x08004a76 0x00000002 PAD
+ 0x08004a78 0x00000020 Code RO 10460 i.exit retarget.o
+ 0x08004a98 0x0000001a Code RO 11851 i.fputc c_w.l(fputc.o)
+ 0x08004ab2 0x00000002 PAD
+ 0x08004ab4 0x0000008c Code RO 563 i.gpio_dir gpio_api.o
+ 0x08004b40 0x0000003a Code RO 564 i.gpio_init gpio_api.o
+ 0x08004b7a 0x00000002 PAD
+ 0x08004b7c 0x0000004c Code RO 9920 i.gpio_init_out mbed_gpio.o
+ 0x08004bc8 0x000000a8 Code RO 9921 i.gpio_init_out_ex mbed_gpio.o
+ 0x08004c70 0x00000008 Code RO 565 i.gpio_mode gpio_api.o
+ 0x08004c78 0x00000084 Code RO 1127 i.init_uart serial_api.o
+ 0x08004cfc 0x00000120 Code RO 11602 i.main main.o
+ 0x08004e1c 0x00000054 Code RO 9680 i.mbed_assert_internal mbed_assert.o
+ 0x08004e70 0x000000ac Code RO 9720 i.mbed_die mbed_board.o
+ 0x08004f1c 0x00000054 Code RO 9721 i.mbed_error_printf mbed_board.o
+ 0x08004f70 0x0000004c Code RO 9722 i.mbed_error_vfprintf mbed_board.o
+ 0x08004fbc 0x00000002 Code RO 10461 i.mbed_main retarget.o
+ 0x08004fbe 0x0000000e Code RO 839 i.mbed_sdk_init mbed_overrides.o
+ 0x08004fcc 0x000000a0 Code RO 879 i.pin_function pinmap.o
+ 0x0800506c 0x0000008c Code RO 880 i.pin_mode pinmap.o
+ 0x080050f8 0x0000003c Code RO 10073 i.pinmap_merge mbed_pinmap_common.o
+ 0x08005134 0x00000060 Code RO 10074 i.pinmap_peripheral mbed_pinmap_common.o
+ 0x08005194 0x0000005c Code RO 10075 i.pinmap_pinout mbed_pinmap_common.o
+ 0x080051f0 0x00000006 Code RO 1128 i.serial_baud serial_api.o
+ 0x080051f6 0x00000002 PAD
+ 0x080051f8 0x000001b0 Code RO 1135 i.serial_init serial_api.o
+ 0x080053a8 0x00000018 Code RO 1136 i.serial_irq_handler serial_api.o
+ 0x080053c0 0x0000015c Code RO 1137 i.serial_irq_handler_asynch serial_api.o
+ 0x0800551c 0x00000024 Code RO 1140 i.serial_putc serial_api.o
+ 0x08005540 0x0000004e Code RO 10205 i.ticker_irq_handler mbed_ticker_api.o
+ 0x0800558e 0x00000002 PAD
+ 0x08005590 0x00000064 Code RO 262 i.timer_irq_handler hal_tick.o
+ 0x080055f4 0x00000010 Code RO 7732 i.us_ticker_clear_interrupt us_ticker.o
+ 0x08005604 0x00000014 Code RO 7733 i.us_ticker_disable_interrupt us_ticker.o
+ 0x08005618 0x00000028 Code RO 7734 i.us_ticker_init us_ticker.o
+ 0x08005640 0x0000000c Code RO 10262 i.us_ticker_irq_handler mbed_us_ticker_api.o
+ 0x0800564c 0x00000030 Code RO 7735 i.us_ticker_read us_ticker.o
+ 0x0800567c 0x00000014 Code RO 7736 i.us_ticker_set_interrupt us_ticker.o
+ 0x08005690 0x00000028 Code RO 10299 i.wait mbed_wait_api.o
+ 0x080056b8 0x0000001c Code RO 10300 i.wait_ms mbed_wait_api.o
+ 0x080056d4 0x0000002c Code RO 12421 locale$$code c_w.l(lc_numeric_c.o)
+ 0x08005700 0x0000002c Code RO 12493 locale$$code c_w.l(lc_ctype_c.o)
+ 0x0800572c 0x0000002c Code RO 8886 t._ZN12SingletonPtrI13PlatformMutexEptEv filebase.o
+ 0x08005758 0x00000036 Code RO 11001 t._ZN6CThunkIN4mbed10SerialBaseEE10trampolineEPS1_PvPMS1_FvS4_E serialbase.o
+ 0x0800578e 0x0000000a Code RO 12368 x$fpl$fpinit fz_wm.l(fpinit.o)
+ 0x08005798 0x00000004 Code RO 12222 x$fpl$printf1 fz_wm.l(printf1.o)
+ 0x0800579c 0x00000004 Code RO 12224 x$fpl$printf2 fz_wm.l(printf2.o)
+ 0x080057a0 0x00000000 Code RO 12466 x$fpl$usenofp fz_wm.l(usenofp.o)
+ 0x080057a0 0x00000048 Data RO 326 .constdata peripheralpins.o
+ 0x080057e8 0x00000048 Data RO 327 .constdata peripheralpins.o
+ 0x08005830 0x00000010 Data RO 375 .constdata system_stm32f4xx.o
+ 0x08005840 0x00000034 Data RO 881 .constdata pinmap.o
+ 0x08005874 0x00000010 Data RO 4708 .constdata stm32f4xx_hal_rcc.o
+ 0x08005884 0x00000014 Data RO 10263 .constdata mbed_us_ticker_api.o
+ 0x08005898 0x00000008 Data RO 10264 .constdata mbed_us_ticker_api.o
+ 0x080058a0 0x00000017 Data RO 10507 .constdata retarget.o
+ 0x080058b7 0x00000001 PAD
+ 0x080058b8 0x00000010 Data RO 10876 .constdata serialbase.o
+ 0x080058c8 0x00000028 Data RO 11811 .constdata c_w.l(_printf_hex_int_ll_ptr.o)
+ 0x080058f0 0x00000011 Data RO 11831 .constdata c_w.l(__printf_flags_ss_wp.o)
+ 0x08005901 0x00000003 PAD
+ 0x08005904 0x00000008 Data RO 12073 .constdata c_w.l(_printf_wctomb.o)
+ 0x0800590c 0x00000026 Data RO 12267 .constdata c_w.l(_printf_fp_hex.o)
+ 0x08005932 0x00000002 PAD
+ 0x08005934 0x00000094 Data RO 12394 .constdata c_w.l(bigflt0.o)
+ 0x080059c8 0x00000034 Data RO 10694 .constdata__ZTVN4mbed10FileHandleE retarget.o
+ 0x080059fc 0x00000018 Data RO 10994 .constdata__ZTVN4mbed10SerialBaseE serialbase.o
+ 0x08005a14 0x0000006c Data RO 10796 .constdata__ZTVN4mbed6SerialE serial.o
+ 0x08005a80 0x0000004c Data RO 11331 .constdata__ZTVN4mbed6StreamE stream.o
+ 0x08005acc 0x00000010 Data RO 8883 .constdata__ZTVN4mbed8FileBaseE filebase.o
+ 0x08005adc 0x00000044 Data RO 8947 .constdata__ZTVN4mbed8FileLikeE filelike.o
+ 0x08005b20 0x00000014 Data RO 8884 .constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs filebase.o
+ 0x08005b34 0x0000001c Data RO 8885 .constdata__ZZN12SingletonPtrI13PlatformMutexE3getEvEs_0 filebase.o
+ 0x08005b50 0x00000020 Data RO 12590 Region$$Table anon$$obj.o
+ 0x08005b70 0x0000001c Data RO 12420 locale$$data c_w.l(lc_numeric_c.o)
+ 0x08005b8c 0x00000110 Data RO 12492 locale$$data c_w.l(lc_ctype_c.o)
+ 0x08005c9c 0x00000004 Data RO 11606 .init_array main.o
+ 0x08005ca0 0x00000000 Data RO 11904 .init_array c_w.l(init_aeabi.o)
+
+
+ Execution Region RW_IRAM1 (Base: 0x20000194, Size: 0x00000570, Max: 0x00017e6c, ABSOLUTE)
+
+ Base Addr Size Type Attr Idx E Section Name Object
+
+ 0x20000194 0x00000004 Data RW 264 .data hal_tick.o
+ 0x20000198 0x00000004 Data RW 376 .data system_stm32f4xx.o
+ 0x2000019c 0x00000008 Data RW 1155 .data serial_api.o
+ 0x200001a4 0x00000004 Data RW 1484 .data stm32f4xx_hal.o
+ 0x200001a8 0x00000004 Data RW 7738 .data us_ticker.o
+ 0x200001ac 0x0000000c Data RW 8843 .data filebase.o
+ 0x200001b8 0x00000008 Data RW 9787 .data mbed_critical.o
+ 0x200001c0 0x00000008 Data RW 10265 .data mbed_us_ticker_api.o
+ 0x200001c8 0x00000008 Data RW 10510 .data retarget.o
+ 0x200001d0 0x00000004 Data RW 11863 .data c_w.l(stdio_streams.o)
+ 0x200001d4 0x00000004 Data RW 11864 .data c_w.l(stdio_streams.o)
+ 0x200001d8 0x00000004 Data RW 11865 .data c_w.l(stdio_streams.o)
+ 0x200001dc 0x00000004 Data RW 12330 .data c_w.l(heapauxa.o)
+ 0x200001e0 0x0000003c Zero RW 263 .bss hal_tick.o
+ 0x2000021c 0x0000026c Zero RW 1154 .bss serial_api.o
+ 0x20000488 0x0000003c Zero RW 7737 .bss us_ticker.o
+ 0x200004c4 0x00000040 Zero RW 10506 .bss retarget.o
+ 0x20000504 0x000000e4 Zero RW 11605 .bss main.o
+ 0x200005e8 0x00000054 Zero RW 11860 .bss c_w.l(stdio_streams.o)
+ 0x2000063c 0x00000054 Zero RW 11861 .bss c_w.l(stdio_streams.o)
+ 0x20000690 0x00000054 Zero RW 11862 .bss c_w.l(stdio_streams.o)
+ 0x200006e4 0x00000004 Zero RW 12025 .bss c_w.l(rt_heap_descriptor.o)
+ 0x200006e8 0x00000004 Zero RW 12030 .bss c_w.l(rt_ddtor_pointer_addr.o)
+ 0x200006ec 0x00000014 Zero RW 12375 .bss c_w.l(rt_locale.o)
+ 0x20000700 0x00000004 Zero RW 12385 .bss c_w.l(rt_errno_addr.o)
+
+
+==============================================================================
+
+Image component sizes
+
+
+ Code (inc. data) RO Data RW Data ZI Data Debug Object Name
+
+ 0 0 0 0 0 12132 analogin.o
+ 0 0 0 0 0 1708 analogin_api.o
+ 0 0 0 0 0 232 callchain.o
+ 52 4 0 0 0 210023 cmsis_nvic.o
+ 292 52 64 12 0 5964 filebase.o
+ 140 10 68 0 0 7228 filelike.o
+ 154 0 0 0 0 9504 filepath.o
+ 206 86 0 0 0 2694 gpio_api.o
+ 280 48 0 4 60 29032 hal_tick.o
+ 0 0 0 0 0 616 interruptmanager.o
+ 348 146 4 0 228 10242 main.o
+ 84 52 0 0 0 2519 mbed_assert.o
+ 332 106 0 0 0 5678 mbed_board.o
+ 284 154 0 8 0 4325 mbed_critical.o
+ 18 0 0 0 0 516 mbed_error.o
+ 244 94 0 0 0 2391 mbed_gpio.o
+ 14 0 0 0 0 1376 mbed_overrides.o
+ 248 76 0 0 0 2849 mbed_pinmap_common.o
+ 78 0 0 0 0 1173 mbed_ticker_api.o
+ 12 6 28 8 0 1124 mbed_us_ticker_api.o
+ 68 4 0 0 0 1735 mbed_wait_api.o
+ 0 0 144 0 0 4872 peripheralpins.o
+ 508 230 52 0 0 3319 pinmap.o
+ 0 0 0 0 0 5880 rawserial.o
+ 874 102 75 8 64 15293 retarget.o
+ 94 14 108 0 0 3696 serial.o
+ 1044 170 0 8 620 11584 serial_api.o
+ 358 24 40 0 0 10764 serialbase.o
+ 36 8 404 0 0 964 startup_stm32f401xe.o
+ 80 16 0 4 0 101764 stm32f4xx_hal.o
+ 36 6 0 0 0 27362 stm32f4xx_hal_cortex.o
+ 36 0 0 0 0 1787 stm32f4xx_hal_dma.o
+ 516 22 0 0 0 1972 stm32f4xx_hal_gpio.o
+ 2 0 0 0 0 538 stm32f4xx_hal_msp_template.o
+ 1528 104 16 0 0 5823 stm32f4xx_hal_rcc.o
+ 258 16 0 0 0 4979 stm32f4xx_hal_tim.o
+ 1610 20 0 0 0 6191 stm32f4xx_hal_uart.o
+ 222 16 76 0 0 7704 stream.o
+ 16 6 0 0 0 6173 sys.o
+ 400 68 16 4 0 3585 system_stm32f4xx.o
+ 144 46 0 4 60 3718 us_ticker.o
+
+ ----------------------------------------------------------------------
+ 10634 1706 1128 60 1032 541029 Object Totals
+ 0 0 32 0 0 0 (incl. Generated)
+ 18 0 1 0 0 0 (incl. Padding)
+
+ ----------------------------------------------------------------------
+
+ Code (inc. data) RO Data RW Data ZI Data Debug Library Member Name
+
+ 60 8 0 0 0 84 __0sscanf.o
+ 44 6 0 0 0 84 __2sprintf.o
+ 8 0 0 0 0 68 __main.o
+ 392 4 17 0 0 92 __printf_flags_ss_wp.o
+ 14 0 0 0 0 68 __printf_wp.o
+ 0 0 0 0 0 0 __rtentry.o
+ 12 0 0 0 0 0 __rtentry2.o
+ 6 0 0 0 0 0 __rtentry4.o
+ 52 8 0 0 0 0 __scatter.o
+ 26 0 0 0 0 0 __scatter_copy.o
+ 28 0 0 0 0 0 __scatter_zi.o
+ 28 0 0 0 0 68 _chval.o
+ 6 0 0 0 0 0 _printf_a.o
+ 6 0 0 0 0 0 _printf_c.o
+ 44 0 0 0 0 108 _printf_char.o
+ 48 6 0 0 0 96 _printf_char_common.o
+ 36 4 0 0 0 80 _printf_char_file.o
+ 40 0 0 0 0 68 _printf_charcount.o
+ 6 0 0 0 0 0 _printf_d.o
+ 120 16 0 0 0 92 _printf_dec.o
+ 6 0 0 0 0 0 _printf_e.o
+ 6 0 0 0 0 0 _printf_f.o
+ 1050 0 0 0 0 216 _printf_fp_dec.o
+ 764 8 38 0 0 100 _printf_fp_hex.o
+ 128 16 0 0 0 84 _printf_fp_infnan.o
+ 6 0 0 0 0 0 _printf_g.o
+ 148 4 40 0 0 160 _printf_hex_int_ll_ptr.o
+ 6 0 0 0 0 0 _printf_i.o
+ 178 0 0 0 0 88 _printf_intcommon.o
+ 10 0 0 0 0 0 _printf_l.o
+ 6 0 0 0 0 0 _printf_lc.o
+ 10 0 0 0 0 0 _printf_ll.o
+ 6 0 0 0 0 0 _printf_lld.o
+ 6 0 0 0 0 0 _printf_lli.o
+ 6 0 0 0 0 0 _printf_llo.o
+ 6 0 0 0 0 0 _printf_llu.o
+ 6 0 0 0 0 0 _printf_llx.o
+ 124 16 0 0 0 92 _printf_longlong_dec.o
+ 6 0 0 0 0 0 _printf_ls.o
+ 6 0 0 0 0 0 _printf_n.o
+ 6 0 0 0 0 0 _printf_o.o
+ 112 8 0 0 0 124 _printf_oct_int_ll.o
+ 6 0 0 0 0 0 _printf_p.o
+ 78 0 0 0 0 108 _printf_pad.o
+ 0 0 0 0 0 0 _printf_percent.o
+ 4 0 0 0 0 0 _printf_percent_end.o
+ 6 0 0 0 0 0 _printf_s.o
+ 82 0 0 0 0 80 _printf_str.o
+ 36 0 0 0 0 84 _printf_truncate.o
+ 6 0 0 0 0 0 _printf_u.o
+ 44 0 0 0 0 108 _printf_wchar.o
+ 188 6 8 0 0 92 _printf_wctomb.o
+ 6 0 0 0 0 0 _printf_x.o
+ 884 6 0 0 0 100 _scanf.o
+ 332 0 0 0 0 96 _scanf_int.o
+ 64 0 0 0 0 84 _sgetc.o
+ 10 0 0 0 0 68 _sputc.o
+ 64 0 0 0 0 92 _wcrtomb.o
+ 46 0 0 0 0 84 aeabi_atexit.o
+ 220 4 148 0 0 96 bigflt0.o
+ 1910 128 0 0 0 672 btod.o
+ 10 0 0 0 0 68 c89vfprintf.o
+ 66 0 0 0 0 84 cxa_finalize.o
+ 10 0 0 0 0 68 defsig_exit.o
+ 50 0 0 0 0 88 defsig_general.o
+ 48 34 0 0 0 76 defsig_pvfn_inner.o
+ 14 0 0 0 0 80 defsig_pvfn_outer.o
+ 80 58 0 0 0 76 defsig_rtmem_inner.o
+ 14 0 0 0 0 80 defsig_rtmem_outer.o
+ 52 38 0 0 0 76 defsig_rtred_inner.o
+ 14 0 0 0 0 80 defsig_rtred_outer.o
+ 76 0 0 0 0 88 fclose.o
+ 8 0 0 0 0 68 ferror.o
+ 100 4 0 0 0 120 fflush.o
+ 470 0 0 0 0 88 flsbuf.o
+ 236 4 0 0 0 128 fopen.o
+ 26 0 0 0 0 68 fputc.o
+ 248 6 0 0 0 84 fseek.o
+ 66 0 0 0 0 76 ftell.o
+ 94 0 0 0 0 80 h1_alloc.o
+ 52 0 0 0 0 68 h1_extend.o
+ 78 0 0 0 0 80 h1_free.o
+ 14 0 0 0 0 84 h1_init.o
+ 80 6 0 4 0 96 heapauxa.o
+ 4 0 0 0 0 136 hguard.o
+ 0 0 0 0 0 0 indicate_semi.o
+ 36 10 0 0 0 80 init_aeabi.o
+ 138 0 0 0 0 168 init_alloc.o
+ 312 46 0 0 0 112 initio.o
+ 18 0 0 0 0 76 isspace.o
+ 44 10 272 0 0 76 lc_ctype_c.o
+ 44 10 28 0 0 76 lc_numeric_c.o
+ 2 0 0 0 0 0 libinit.o
+ 50 0 0 0 0 0 libinit2.o
+ 0 0 0 0 0 0 libshutdown2.o
+ 138 0 0 0 0 80 lludiv10.o
+ 0 0 0 0 0 0 maybetermalloc1.o
+ 16 4 0 0 0 76 rt_ctype_table.o
+ 8 4 0 0 4 68 rt_ddtor_pointer_addr.o
+ 8 4 0 0 4 68 rt_errno_addr.o
+ 8 4 0 0 4 68 rt_heap_descriptor.o
+ 8 4 0 0 20 68 rt_locale.o
+ 78 0 0 0 0 80 rt_memclr_w.o
+ 100 0 0 0 0 80 rt_memcpy_w.o
+ 44 8 0 0 0 84 scanf_char.o
+ 20 0 0 0 0 68 setbuf.o
+ 70 0 0 0 0 80 setvbuf.o
+ 240 6 0 0 0 156 stdio.o
+ 0 0 0 12 252 0 stdio_streams.o
+ 128 0 0 0 0 68 strcmpv7m.o
+ 62 0 0 0 0 76 strlen.o
+ 150 0 0 0 0 80 strncmp.o
+ 12 4 0 0 0 68 sys_exit.o
+ 14 0 0 0 0 76 sys_wrch.o
+ 2 0 0 0 0 68 use_no_semi.o
+ 36 4 0 0 0 76 vsprintf.o
+ 36 0 0 0 0 84 aeabi_vec_ctor_nocookie_nodtor.o
+ 6 0 0 0 0 68 pure_virt.o
+ 10 0 0 0 0 116 fpinit.o
+ 4 0 0 0 0 116 printf1.o
+ 4 0 0 0 0 116 printf2.o
+ 0 0 0 0 0 0 usenofp.o
+ 48 0 0 0 0 124 fpclassify.o
+
+ ----------------------------------------------------------------------
+ 11394 516 556 16 284 8276 Library Totals
+ 26 0 5 0 0 0 (incl. Padding)
+
+ ----------------------------------------------------------------------
+
+ Code (inc. data) RO Data RW Data ZI Data Debug Library Name
+
+ 11260 516 551 16 284 7652 c_w.l
+ 42 0 0 0 0 152 cpprt_w.l
+ 18 0 0 0 0 348 fz_wm.l
+ 48 0 0 0 0 124 m_wm.l
+
+ ----------------------------------------------------------------------
+ 11394 516 556 16 284 8276 Library Totals
+
+ ----------------------------------------------------------------------
+
+==============================================================================
+
+
+ Code (inc. data) RO Data RW Data ZI Data Debug
+
+ 22028 2222 1684 76 1316 533433 Grand Totals
+ 22028 2222 1684 76 1316 533433 ELF Image Totals
+ 22028 2222 1684 76 0 0 ROM Totals
+
+==============================================================================
+
+ Total RO Size (Code + RO Data) 23712 ( 23.16kB)
+ Total RW Size (RW Data + ZI Data) 1392 ( 1.36kB)
+ Total ROM Size (Code + RO Data + RW Data) 23788 ( 23.23kB)
+
+==============================================================================
+
diff -r 000000000000 -r c76361bd82e8 src/pgw.uvoptx
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/pgw.uvoptx Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,4566 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+ <SchemaVersion>1.0</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Extensions>
+ <cExt>*.c</cExt>
+ <aExt>*.s*; *.src; *.a*</aExt>
+ <oExt>*.obj</oExt>
+ <lExt>*.lib</lExt>
+ <tExt>*.txt; *.h; *.inc</tExt>
+ <pExt>*.plm</pExt>
+ <CppX>*.cpp</CppX>
+ <nMigrate>0</nMigrate>
+ </Extensions>
+
+ <DaveTm>
+ <dwLowDateTime>0</dwLowDateTime>
+ <dwHighDateTime>0</dwHighDateTime>
+ </DaveTm>
+
+ <Target>
+ <TargetName>Pico</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <TargetOption>
+ <CLKADS>32000000</CLKADS>
+ <OPTTT>
+ <gFlags>1</gFlags>
+ <BeepAtEnd>1</BeepAtEnd>
+ <RunSim>0</RunSim>
+ <RunTarget>1</RunTarget>
+ <RunAbUc>0</RunAbUc>
+ </OPTTT>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <FlashByte>65535</FlashByte>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ </OPTHX>
+ <OPTLEX>
+ <PageWidth>79</PageWidth>
+ <PageLength>66</PageLength>
+ <TabStop>8</TabStop>
+ <ListingPath>.\build\</ListingPath>
+ </OPTLEX>
+ <ListingPage>
+ <CreateCListing>1</CreateCListing>
+ <CreateAListing>1</CreateAListing>
+ <CreateLListing>1</CreateLListing>
+ <CreateIListing>0</CreateIListing>
+ <AsmCond>1</AsmCond>
+ <AsmSymb>1</AsmSymb>
+ <AsmXref>0</AsmXref>
+ <CCond>1</CCond>
+ <CCode>0</CCode>
+ <CListInc>0</CListInc>
+ <CSymb>0</CSymb>
+ <LinkerCodeListing>0</LinkerCodeListing>
+ </ListingPage>
+ <OPTXL>
+ <LMap>1</LMap>
+ <LComments>1</LComments>
+ <LGenerateSymbols>1</LGenerateSymbols>
+ <LLibSym>1</LLibSym>
+ <LLines>1</LLines>
+ <LLocSym>1</LLocSym>
+ <LPubSym>1</LPubSym>
+ <LXref>0</LXref>
+ <LExpSel>0</LExpSel>
+ </OPTXL>
+ <OPTFL>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <IsCurrentTarget>1</IsCurrentTarget>
+ </OPTFL>
+ <CpuCode>18</CpuCode>
+ <Books>
+ <Book>
+ <Number>0</Number>
+ <Title>STM32F401C-Discovery Quick Start Guide (STM32F401C-Discovery)</Title>
+ <Path>C:\Keil_v5\ARM\PACK\Keil\STM32F4xx_DFP\2.11.0\MDK\Boards\ST\STM32F401C-Discovery\Documentation\32F401C-DISCOVERY_QSG.pdf</Path>
+ </Book>
+ <Book>
+ <Number>1</Number>
+ <Title>Getting Started (STM32F401C-Discovery)</Title>
+ <Path>C:\Keil_v5\ARM\PACK\Keil\STM32F4xx_DFP\2.11.0\MDK\Boards\ST\STM32F401C-Discovery\Documentation\DM00092826.pdf</Path>
+ </Book>
+ <Book>
+ <Number>2</Number>
+ <Title>User Manual (STM32F401C-Discovery)</Title>
+ <Path>C:\Keil_v5\ARM\PACK\Keil\STM32F4xx_DFP\2.11.0\MDK\Boards\ST\STM32F401C-Discovery\Documentation\DM00093902.pdf</Path>
+ </Book>
+ <Book>
+ <Number>3</Number>
+ <Title>Bill of Materials (STM32F401C-Discovery)</Title>
+ <Path>C:\Keil_v5\ARM\PACK\Keil\STM32F4xx_DFP\2.11.0\MDK\Boards\ST\STM32F401C-Discovery\Documentation\stm32f401c-disco_bom.zip</Path>
+ </Book>
+ <Book>
+ <Number>4</Number>
+ <Title>Gerber Files (STM32F401C-Discovery)</Title>
+ <Path>C:\Keil_v5\ARM\PACK\Keil\STM32F4xx_DFP\2.11.0\MDK\Boards\ST\STM32F401C-Discovery\Documentation\stm32f401c-disco_gerber.zip</Path>
+ </Book>
+ <Book>
+ <Number>5</Number>
+ <Title>Schematics (STM32F401C-Discovery)</Title>
+ <Path>C:\Keil_v5\ARM\PACK\Keil\STM32F4xx_DFP\2.11.0\MDK\Boards\ST\STM32F401C-Discovery\Documentation\stm32f401c-disco_sch.zip</Path>
+ </Book>
+ <Book>
+ <Number>6</Number>
+ <Title>STM32F401C-Discovery Web Page (STM32F401C-Discovery)</Title>
+ <Path>http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1199/PF259098</Path>
+ </Book>
+ </Books>
+ <DebugOpt>
+ <uSim>0</uSim>
+ <uTrg>1</uTrg>
+ <sLdApp>1</sLdApp>
+ <sGomain>1</sGomain>
+ <sRbreak>1</sRbreak>
+ <sRwatch>1</sRwatch>
+ <sRmem>1</sRmem>
+ <sRfunc>1</sRfunc>
+ <sRbox>1</sRbox>
+ <tLdApp>1</tLdApp>
+ <tGomain>1</tGomain>
+ <tRbreak>1</tRbreak>
+ <tRwatch>1</tRwatch>
+ <tRmem>1</tRmem>
+ <tRfunc>0</tRfunc>
+ <tRbox>1</tRbox>
+ <tRtrace>0</tRtrace>
+ <sRSysVw>1</sRSysVw>
+ <tRSysVw>1</tRSysVw>
+ <sRunDeb>0</sRunDeb>
+ <sLrtime>0</sLrtime>
+ <nTsel>5</nTsel>
+ <sDll></sDll>
+ <sDllPa></sDllPa>
+ <sDlgDll></sDlgDll>
+ <sDlgPa></sDlgPa>
+ <sIfile></sIfile>
+ <tDll></tDll>
+ <tDllPa></tDllPa>
+ <tDlgDll></tDlgDll>
+ <tDlgPa></tDlgPa>
+ <tIfile></tIfile>
+ <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+ </DebugOpt>
+ <TargetDriverDllRegistry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMRTXEVENTFLAGS</Key>
+ <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGTARM</Key>
+ <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ARMDBGFLAGS</Key>
+ <Name></Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>DLGUARM</Key>
+ <Name>(105=-1,-1,-1,-1,0)</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>UL2CM3</Key>
+ <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_512 -FS08000000 -FL080000 -FP0($$Device:STM32F401RETx$CMSIS\Flash\STM32F4xx_512.FLM))</Name>
+ </SetRegEntry>
+ <SetRegEntry>
+ <Number>0</Number>
+ <Key>ST-LINKIII-KEIL_SWO</Key>
+ <Name>-U-O206 -O206 -S0 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F401RETx$CMSIS\Flash\STM32F4xx_512.FLM)</Name>
+ </SetRegEntry>
+ </TargetDriverDllRegistry>
+ <Breakpoint/>
+ <Tracepoint>
+ <THDelay>0</THDelay>
+ </Tracepoint>
+ <DebugFlag>
+ <trace>0</trace>
+ <periodic>0</periodic>
+ <aLwin>1</aLwin>
+ <aCover>0</aCover>
+ <aSer1>0</aSer1>
+ <aSer2>0</aSer2>
+ <aPa>0</aPa>
+ <viewmode>1</viewmode>
+ <vrSel>0</vrSel>
+ <aSym>0</aSym>
+ <aTbox>0</aTbox>
+ <AscS1>0</AscS1>
+ <AscS2>0</AscS2>
+ <AscS3>0</AscS3>
+ <aSer3>0</aSer3>
+ <eProf>0</eProf>
+ <aLa>0</aLa>
+ <aPa1>0</aPa1>
+ <AscS4>0</AscS4>
+ <aSer4>0</aSer4>
+ <StkLoc>0</StkLoc>
+ <TrcWin>0</TrcWin>
+ <newCpu>0</newCpu>
+ <uProt>0</uProt>
+ </DebugFlag>
+ <LintExecutable></LintExecutable>
+ <LintConfigFile></LintConfigFile>
+ <bLintAuto>0</bLintAuto>
+ <Lin2Executable></Lin2Executable>
+ <Lin2ConfigFile></Lin2ConfigFile>
+ <bLin2Auto>0</bLin2Auto>
+ <DebugDescription>
+ <Enable>1</Enable>
+ <EnableLog>0</EnableLog>
+ <Protocol>2</Protocol>
+ <DbgClock>10000000</DbgClock>
+ </DebugDescription>
+ </TargetOption>
+ </Target>
+
+ <Group>
+ <GroupName>TARGET_NUCLEO_F401RE</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>1</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis.h</PathWithFileName>
+ <FilenameWithoutPath>cmsis.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>2</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.c</PathWithFileName>
+ <FilenameWithoutPath>cmsis_nvic.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>3</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.h</PathWithFileName>
+ <FilenameWithoutPath>cmsis_nvic.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>4</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.c</PathWithFileName>
+ <FilenameWithoutPath>hal_tick.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>5</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.h</PathWithFileName>
+ <FilenameWithoutPath>hal_tick.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>6</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h</PathWithFileName>
+ <FilenameWithoutPath>objects.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>7</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h</PathWithFileName>
+ <FilenameWithoutPath>PeripheralNames.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>8</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c</PathWithFileName>
+ <FilenameWithoutPath>PeripheralPins.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>9</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h</PathWithFileName>
+ <FilenameWithoutPath>PinNames.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>10</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h</PathWithFileName>
+ <FilenameWithoutPath>PortNames.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>11</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f401xc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f401xc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>12</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>13</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_conf.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>14</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.c</PathWithFileName>
+ <FilenameWithoutPath>system_stm32f4xx.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>1</GroupNumber>
+ <FileNumber>15</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.h</PathWithFileName>
+ <FilenameWithoutPath>system_stm32f4xx.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>TARGET_STM32F4</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>16</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c</PathWithFileName>
+ <FilenameWithoutPath>analogin_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>17</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c</PathWithFileName>
+ <FilenameWithoutPath>analogout_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>18</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/can_api.c</PathWithFileName>
+ <FilenameWithoutPath>can_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>19</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/common_objects.h</PathWithFileName>
+ <FilenameWithoutPath>common_objects.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>20</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/device.h</PathWithFileName>
+ <FilenameWithoutPath>device.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>21</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/entropy_hardware_poll.c</PathWithFileName>
+ <FilenameWithoutPath>entropy_hardware_poll.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>22</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c</PathWithFileName>
+ <FilenameWithoutPath>gpio_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>23</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c</PathWithFileName>
+ <FilenameWithoutPath>gpio_irq_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>24</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_object.h</PathWithFileName>
+ <FilenameWithoutPath>gpio_object.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>25</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c</PathWithFileName>
+ <FilenameWithoutPath>i2c_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>26</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_overrides.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>27</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/PeripheralPins.h</PathWithFileName>
+ <FilenameWithoutPath>PeripheralPins.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>28</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c</PathWithFileName>
+ <FilenameWithoutPath>pinmap.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>29</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c</PathWithFileName>
+ <FilenameWithoutPath>port_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>30</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c</PathWithFileName>
+ <FilenameWithoutPath>pwmout_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>31</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c</PathWithFileName>
+ <FilenameWithoutPath>rtc_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>32</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c</PathWithFileName>
+ <FilenameWithoutPath>serial_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>33</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c</PathWithFileName>
+ <FilenameWithoutPath>sleep.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>34</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c</PathWithFileName>
+ <FilenameWithoutPath>spi_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>35</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32_hal_legacy.h</PathWithFileName>
+ <FilenameWithoutPath>stm32_hal_legacy.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>36</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>37</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>38</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_adc.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>39</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_adc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>40</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_adc_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>41</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_adc_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>42</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_can.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>43</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_can.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>44</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_cec.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>45</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_cec.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>46</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_conf_template.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_conf_template.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>47</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_cortex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>48</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_cortex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>49</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_crc.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>50</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_crc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>51</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_cryp.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>52</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_cryp.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>53</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_cryp_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>54</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_cryp_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>55</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dac.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>56</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dac.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>57</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dac_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>58</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dac_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>59</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dcmi.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>60</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dcmi.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>61</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dcmi_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>62</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dcmi_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>63</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_def.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_def.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>64</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dfsdm.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>65</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dfsdm.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>66</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dma.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>67</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dma.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>68</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dma2d.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>69</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dma2d.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>70</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dma_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>71</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dma_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>72</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dsi.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>73</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_dsi.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>74</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_eth.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>75</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_eth.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>76</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_flash.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>77</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_flash.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>78</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_flash_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>79</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_flash_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>80</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_flash_ramfunc.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>81</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_flash_ramfunc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>82</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_fmpi2c.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>83</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_fmpi2c.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>84</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_fmpi2c_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>85</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_fmpi2c_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>86</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_gpio.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>87</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_gpio.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>88</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_gpio_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>89</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_hash.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>90</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_hash.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>91</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_hash_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>92</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_hash_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>93</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_hcd.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>94</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_hcd.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>95</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_i2c.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>96</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_i2c.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>97</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_i2c_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>98</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_i2c_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>99</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_i2s.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>100</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_i2s.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>101</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_i2s_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>102</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_i2s_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>103</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_irda.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>104</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_irda.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>105</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_iwdg.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>106</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_iwdg.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>107</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_lptim.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>108</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_lptim.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>109</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_ltdc.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>110</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_ltdc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>111</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_ltdc_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>112</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_ltdc_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>113</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_msp_template.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_msp_template.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>114</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_nand.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>115</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_nand.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>116</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_nor.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>117</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_nor.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>118</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pccard.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>119</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pccard.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>120</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pcd.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>121</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pcd.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>122</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pcd_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>123</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pcd_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>124</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pwr.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>125</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pwr.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>126</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pwr_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>127</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_pwr_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>128</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_qspi.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>129</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_qspi.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>130</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rcc.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>131</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rcc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>132</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rcc_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>133</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rcc_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>134</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rng.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>135</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rng.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>136</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rtc.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>137</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rtc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>138</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rtc_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>139</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_rtc_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>140</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sai.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>141</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sai.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>142</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sai_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>143</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sai_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>144</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sd.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>145</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sd.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>146</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sdram.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>147</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sdram.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>148</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_smartcard.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>149</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_smartcard.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>150</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_spdifrx.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>151</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_spdifrx.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>152</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_spi.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>153</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_spi.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>154</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sram.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>155</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_sram.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>156</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_tim.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>157</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_tim.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>158</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_tim_ex.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>159</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_tim_ex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>160</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_uart.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>161</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_uart.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>162</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_usart.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>163</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_usart.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>164</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_wwdg.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>165</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_wwdg.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>166</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_ll_fmc.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>167</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_ll_fmc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>168</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_ll_fsmc.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>169</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_ll_fsmc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>170</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_ll_sdmmc.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>171</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_ll_sdmmc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>172</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.c</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_ll_usb.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>173</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_ll_usb.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>2</GroupNumber>
+ <FileNumber>174</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c</PathWithFileName>
+ <FilenameWithoutPath>us_ticker.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>TOOLCHAIN_ARM_STD</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>175</FileNumber>
+ <FileType>2</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.S</PathWithFileName>
+ <FilenameWithoutPath>startup_stm32f401xe.S</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>3</GroupNumber>
+ <FileNumber>176</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.cpp</PathWithFileName>
+ <FilenameWithoutPath>sys.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>api</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>177</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/AnalogIn.h</PathWithFileName>
+ <FilenameWithoutPath>AnalogIn.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>178</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/AnalogOut.h</PathWithFileName>
+ <FilenameWithoutPath>AnalogOut.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>179</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/BusIn.h</PathWithFileName>
+ <FilenameWithoutPath>BusIn.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>180</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/BusInOut.h</PathWithFileName>
+ <FilenameWithoutPath>BusInOut.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>181</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/BusOut.h</PathWithFileName>
+ <FilenameWithoutPath>BusOut.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>182</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/Callback.h</PathWithFileName>
+ <FilenameWithoutPath>Callback.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>183</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/CallChain.h</PathWithFileName>
+ <FilenameWithoutPath>CallChain.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>184</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/CAN.h</PathWithFileName>
+ <FilenameWithoutPath>CAN.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>185</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/can_helper.h</PathWithFileName>
+ <FilenameWithoutPath>can_helper.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>186</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/CircularBuffer.h</PathWithFileName>
+ <FilenameWithoutPath>CircularBuffer.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>187</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/critical.h</PathWithFileName>
+ <FilenameWithoutPath>critical.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>188</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/CThunk.h</PathWithFileName>
+ <FilenameWithoutPath>CThunk.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>189</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/DigitalIn.h</PathWithFileName>
+ <FilenameWithoutPath>DigitalIn.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>190</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/DigitalInOut.h</PathWithFileName>
+ <FilenameWithoutPath>DigitalInOut.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>191</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/DigitalOut.h</PathWithFileName>
+ <FilenameWithoutPath>DigitalOut.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>192</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/DirHandle.h</PathWithFileName>
+ <FilenameWithoutPath>DirHandle.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>193</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/Ethernet.h</PathWithFileName>
+ <FilenameWithoutPath>Ethernet.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>194</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/FileBase.h</PathWithFileName>
+ <FilenameWithoutPath>FileBase.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>195</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/FileHandle.h</PathWithFileName>
+ <FilenameWithoutPath>FileHandle.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>196</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/FileLike.h</PathWithFileName>
+ <FilenameWithoutPath>FileLike.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>197</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/FilePath.h</PathWithFileName>
+ <FilenameWithoutPath>FilePath.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>198</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/FileSystemLike.h</PathWithFileName>
+ <FilenameWithoutPath>FileSystemLike.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>199</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/FunctionPointer.h</PathWithFileName>
+ <FilenameWithoutPath>FunctionPointer.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>200</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/I2C.h</PathWithFileName>
+ <FilenameWithoutPath>I2C.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>201</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/I2CSlave.h</PathWithFileName>
+ <FilenameWithoutPath>I2CSlave.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>202</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/InterruptIn.h</PathWithFileName>
+ <FilenameWithoutPath>InterruptIn.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>203</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/InterruptManager.h</PathWithFileName>
+ <FilenameWithoutPath>InterruptManager.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>204</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/LocalFileSystem.h</PathWithFileName>
+ <FilenameWithoutPath>LocalFileSystem.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>205</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/LowPowerTicker.h</PathWithFileName>
+ <FilenameWithoutPath>LowPowerTicker.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>206</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/LowPowerTimeout.h</PathWithFileName>
+ <FilenameWithoutPath>LowPowerTimeout.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>207</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/LowPowerTimer.h</PathWithFileName>
+ <FilenameWithoutPath>LowPowerTimer.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>208</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/mbed.h</PathWithFileName>
+ <FilenameWithoutPath>mbed.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>209</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/mbed_assert.h</PathWithFileName>
+ <FilenameWithoutPath>mbed_assert.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>210</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/mbed_debug.h</PathWithFileName>
+ <FilenameWithoutPath>mbed_debug.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>211</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/mbed_error.h</PathWithFileName>
+ <FilenameWithoutPath>mbed_error.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>212</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/mbed_interface.h</PathWithFileName>
+ <FilenameWithoutPath>mbed_interface.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>213</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/mbed_mem_trace.h</PathWithFileName>
+ <FilenameWithoutPath>mbed_mem_trace.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>214</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/mbed_stats.h</PathWithFileName>
+ <FilenameWithoutPath>mbed_stats.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>215</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/platform.h</PathWithFileName>
+ <FilenameWithoutPath>platform.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>216</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/PlatformMutex.h</PathWithFileName>
+ <FilenameWithoutPath>PlatformMutex.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>217</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/PortIn.h</PathWithFileName>
+ <FilenameWithoutPath>PortIn.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>218</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/PortInOut.h</PathWithFileName>
+ <FilenameWithoutPath>PortInOut.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>219</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/PortOut.h</PathWithFileName>
+ <FilenameWithoutPath>PortOut.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>220</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/PwmOut.h</PathWithFileName>
+ <FilenameWithoutPath>PwmOut.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>221</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/RawSerial.h</PathWithFileName>
+ <FilenameWithoutPath>RawSerial.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>222</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/rtc_time.h</PathWithFileName>
+ <FilenameWithoutPath>rtc_time.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>223</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/semihost_api.h</PathWithFileName>
+ <FilenameWithoutPath>semihost_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>224</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/Serial.h</PathWithFileName>
+ <FilenameWithoutPath>Serial.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>225</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/SerialBase.h</PathWithFileName>
+ <FilenameWithoutPath>SerialBase.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>226</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/SingletonPtr.h</PathWithFileName>
+ <FilenameWithoutPath>SingletonPtr.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>227</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/SPI.h</PathWithFileName>
+ <FilenameWithoutPath>SPI.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>228</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/SPISlave.h</PathWithFileName>
+ <FilenameWithoutPath>SPISlave.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>229</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/Stream.h</PathWithFileName>
+ <FilenameWithoutPath>Stream.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>230</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/Ticker.h</PathWithFileName>
+ <FilenameWithoutPath>Ticker.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>231</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/Timeout.h</PathWithFileName>
+ <FilenameWithoutPath>Timeout.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>232</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/Timer.h</PathWithFileName>
+ <FilenameWithoutPath>Timer.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>233</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/TimerEvent.h</PathWithFileName>
+ <FilenameWithoutPath>TimerEvent.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>234</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/toolchain.h</PathWithFileName>
+ <FilenameWithoutPath>toolchain.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>235</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/Transaction.h</PathWithFileName>
+ <FilenameWithoutPath>Transaction.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>4</GroupNumber>
+ <FileNumber>236</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/api/wait_api.h</PathWithFileName>
+ <FilenameWithoutPath>wait_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>cmsis</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>237</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/arm_common_tables.h</PathWithFileName>
+ <FilenameWithoutPath>arm_common_tables.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>238</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/arm_const_structs.h</PathWithFileName>
+ <FilenameWithoutPath>arm_const_structs.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>239</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/arm_math.h</PathWithFileName>
+ <FilenameWithoutPath>arm_math.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>240</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_ca9.h</PathWithFileName>
+ <FilenameWithoutPath>core_ca9.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>241</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_ca_mmu.h</PathWithFileName>
+ <FilenameWithoutPath>core_ca_mmu.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>242</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_caFunc.h</PathWithFileName>
+ <FilenameWithoutPath>core_caFunc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>243</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_caInstr.h</PathWithFileName>
+ <FilenameWithoutPath>core_caInstr.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>244</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cm0.h</PathWithFileName>
+ <FilenameWithoutPath>core_cm0.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>245</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cm0plus.h</PathWithFileName>
+ <FilenameWithoutPath>core_cm0plus.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>246</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cm3.h</PathWithFileName>
+ <FilenameWithoutPath>core_cm3.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>247</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cm4.h</PathWithFileName>
+ <FilenameWithoutPath>core_cm4.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>248</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cm4_simd.h</PathWithFileName>
+ <FilenameWithoutPath>core_cm4_simd.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>249</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cm7.h</PathWithFileName>
+ <FilenameWithoutPath>core_cm7.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>250</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cmFunc.h</PathWithFileName>
+ <FilenameWithoutPath>core_cmFunc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>251</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cmInstr.h</PathWithFileName>
+ <FilenameWithoutPath>core_cmInstr.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>252</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cmSecureAccess.h</PathWithFileName>
+ <FilenameWithoutPath>core_cmSecureAccess.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>253</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_cmSimd.h</PathWithFileName>
+ <FilenameWithoutPath>core_cmSimd.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>254</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_sc000.h</PathWithFileName>
+ <FilenameWithoutPath>core_sc000.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>5</GroupNumber>
+ <FileNumber>255</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/targets/cmsis/core_sc300.h</PathWithFileName>
+ <FilenameWithoutPath>core_sc300.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>common</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>256</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/AnalogIn.cpp</PathWithFileName>
+ <FilenameWithoutPath>AnalogIn.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>257</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/BusIn.cpp</PathWithFileName>
+ <FilenameWithoutPath>BusIn.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>258</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/BusInOut.cpp</PathWithFileName>
+ <FilenameWithoutPath>BusInOut.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>259</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/BusOut.cpp</PathWithFileName>
+ <FilenameWithoutPath>BusOut.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>260</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/CallChain.cpp</PathWithFileName>
+ <FilenameWithoutPath>CallChain.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>261</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/CAN.cpp</PathWithFileName>
+ <FilenameWithoutPath>CAN.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>262</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/Ethernet.cpp</PathWithFileName>
+ <FilenameWithoutPath>Ethernet.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>263</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/FileBase.cpp</PathWithFileName>
+ <FilenameWithoutPath>FileBase.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>264</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/FileLike.cpp</PathWithFileName>
+ <FilenameWithoutPath>FileLike.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>265</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/FilePath.cpp</PathWithFileName>
+ <FilenameWithoutPath>FilePath.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>266</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/FileSystemLike.cpp</PathWithFileName>
+ <FilenameWithoutPath>FileSystemLike.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>267</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/I2C.cpp</PathWithFileName>
+ <FilenameWithoutPath>I2C.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>268</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/I2CSlave.cpp</PathWithFileName>
+ <FilenameWithoutPath>I2CSlave.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>269</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/InterruptIn.cpp</PathWithFileName>
+ <FilenameWithoutPath>InterruptIn.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>270</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/InterruptManager.cpp</PathWithFileName>
+ <FilenameWithoutPath>InterruptManager.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>271</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/LocalFileSystem.cpp</PathWithFileName>
+ <FilenameWithoutPath>LocalFileSystem.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>272</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_alloc_wrappers.cpp</PathWithFileName>
+ <FilenameWithoutPath>mbed_alloc_wrappers.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>273</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_assert.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_assert.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>274</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_board.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_board.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>275</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_critical.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_critical.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>276</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_error.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_error.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>277</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_gpio.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_gpio.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>278</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_interface.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_interface.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>279</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_lp_ticker_api.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_lp_ticker_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>280</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_mem_trace.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_mem_trace.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>281</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_pinmap_common.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_pinmap_common.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>282</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_rtc_time.cpp</PathWithFileName>
+ <FilenameWithoutPath>mbed_rtc_time.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>283</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_semihost_api.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_semihost_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>284</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_ticker_api.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_ticker_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>285</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_us_ticker_api.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_us_ticker_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>286</FileNumber>
+ <FileType>1</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/mbed_wait_api.c</PathWithFileName>
+ <FilenameWithoutPath>mbed_wait_api.c</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>287</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/RawSerial.cpp</PathWithFileName>
+ <FilenameWithoutPath>RawSerial.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>288</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/retarget.cpp</PathWithFileName>
+ <FilenameWithoutPath>retarget.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>289</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/Serial.cpp</PathWithFileName>
+ <FilenameWithoutPath>Serial.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>290</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/SerialBase.cpp</PathWithFileName>
+ <FilenameWithoutPath>SerialBase.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>291</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/SPI.cpp</PathWithFileName>
+ <FilenameWithoutPath>SPI.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>292</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/SPISlave.cpp</PathWithFileName>
+ <FilenameWithoutPath>SPISlave.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>293</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/Stream.cpp</PathWithFileName>
+ <FilenameWithoutPath>Stream.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>294</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/Ticker.cpp</PathWithFileName>
+ <FilenameWithoutPath>Ticker.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>295</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/Timeout.cpp</PathWithFileName>
+ <FilenameWithoutPath>Timeout.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>296</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/Timer.cpp</PathWithFileName>
+ <FilenameWithoutPath>Timer.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>6</GroupNumber>
+ <FileNumber>297</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/common/TimerEvent.cpp</PathWithFileName>
+ <FilenameWithoutPath>TimerEvent.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>hal</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>298</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/analogin_api.h</PathWithFileName>
+ <FilenameWithoutPath>analogin_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>299</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/analogout_api.h</PathWithFileName>
+ <FilenameWithoutPath>analogout_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>300</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/buffer.h</PathWithFileName>
+ <FilenameWithoutPath>buffer.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>301</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/can_api.h</PathWithFileName>
+ <FilenameWithoutPath>can_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>302</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/dma_api.h</PathWithFileName>
+ <FilenameWithoutPath>dma_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>303</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/ethernet_api.h</PathWithFileName>
+ <FilenameWithoutPath>ethernet_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>304</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/gpio_api.h</PathWithFileName>
+ <FilenameWithoutPath>gpio_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>305</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/gpio_irq_api.h</PathWithFileName>
+ <FilenameWithoutPath>gpio_irq_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>306</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/i2c_api.h</PathWithFileName>
+ <FilenameWithoutPath>i2c_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>307</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/lp_ticker_api.h</PathWithFileName>
+ <FilenameWithoutPath>lp_ticker_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>308</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/pinmap.h</PathWithFileName>
+ <FilenameWithoutPath>pinmap.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>309</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/port_api.h</PathWithFileName>
+ <FilenameWithoutPath>port_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>310</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/pwmout_api.h</PathWithFileName>
+ <FilenameWithoutPath>pwmout_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>311</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/rtc_api.h</PathWithFileName>
+ <FilenameWithoutPath>rtc_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>312</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/serial_api.h</PathWithFileName>
+ <FilenameWithoutPath>serial_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>313</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/sleep_api.h</PathWithFileName>
+ <FilenameWithoutPath>sleep_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>314</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/spi_api.h</PathWithFileName>
+ <FilenameWithoutPath>spi_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>315</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/ticker_api.h</PathWithFileName>
+ <FilenameWithoutPath>ticker_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>7</GroupNumber>
+ <FileNumber>316</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/us_ticker_api.h</PathWithFileName>
+ <FilenameWithoutPath>us_ticker_api.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>mbed</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>8</GroupNumber>
+ <FileNumber>317</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed_config.h</PathWithFileName>
+ <FilenameWithoutPath>mbed_config.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>storage_abstraction</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>9</GroupNumber>
+ <FileNumber>318</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/storage_abstraction/Driver_Common.h</PathWithFileName>
+ <FilenameWithoutPath>Driver_Common.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>9</GroupNumber>
+ <FileNumber>319</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>mbed-dev/hal/storage_abstraction/Driver_Storage.h</PathWithFileName>
+ <FilenameWithoutPath>Driver_Storage.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>USB_CDC_src</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>10</GroupNumber>
+ <FileNumber>320</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Src\stm32f4xx_it.cpp</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_it.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>10</GroupNumber>
+ <FileNumber>321</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Src\usb_device.cpp</PathWithFileName>
+ <FilenameWithoutPath>usb_device.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>10</GroupNumber>
+ <FileNumber>322</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Src\usbd_cdc.cpp</PathWithFileName>
+ <FilenameWithoutPath>usbd_cdc.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>10</GroupNumber>
+ <FileNumber>323</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Src\usbd_cdc_if.cpp</PathWithFileName>
+ <FilenameWithoutPath>usbd_cdc_if.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>10</GroupNumber>
+ <FileNumber>324</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Src\usbd_conf.cpp</PathWithFileName>
+ <FilenameWithoutPath>usbd_conf.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>10</GroupNumber>
+ <FileNumber>325</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Src\usbd_core.cpp</PathWithFileName>
+ <FilenameWithoutPath>usbd_core.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>10</GroupNumber>
+ <FileNumber>326</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Src\usbd_ctlreq.cpp</PathWithFileName>
+ <FilenameWithoutPath>usbd_ctlreq.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>10</GroupNumber>
+ <FileNumber>327</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Src\usbd_desc.cpp</PathWithFileName>
+ <FilenameWithoutPath>usbd_desc.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>10</GroupNumber>
+ <FileNumber>328</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Src\usbd_ioreq.cpp</PathWithFileName>
+ <FilenameWithoutPath>usbd_ioreq.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>USB_CDC_inc</GroupName>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>329</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\mxconstants.h</PathWithFileName>
+ <FilenameWithoutPath>mxconstants.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>330</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\stm32f4xx_hal_conf.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_hal_conf.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>331</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\stm32f4xx_it.h</PathWithFileName>
+ <FilenameWithoutPath>stm32f4xx_it.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>332</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\usb_device.h</PathWithFileName>
+ <FilenameWithoutPath>usb_device.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>333</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\usbd_cdc.h</PathWithFileName>
+ <FilenameWithoutPath>usbd_cdc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>334</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\usbd_cdc_if.h</PathWithFileName>
+ <FilenameWithoutPath>usbd_cdc_if.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>335</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\usbd_conf.h</PathWithFileName>
+ <FilenameWithoutPath>usbd_conf.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>336</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\usbd_core.h</PathWithFileName>
+ <FilenameWithoutPath>usbd_core.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>337</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\usbd_ctlreq.h</PathWithFileName>
+ <FilenameWithoutPath>usbd_ctlreq.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>338</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\usbd_def.h</PathWithFileName>
+ <FilenameWithoutPath>usbd_def.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>339</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\usbd_desc.h</PathWithFileName>
+ <FilenameWithoutPath>usbd_desc.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>11</GroupNumber>
+ <FileNumber>340</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\usb_cdc\Inc\usbd_ioreq.h</PathWithFileName>
+ <FilenameWithoutPath>usbd_ioreq.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>SX1308HAL_src</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>12</GroupNumber>
+ <FileNumber>341</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\SX1308HAL\src\loragw_hal.cpp</PathWithFileName>
+ <FilenameWithoutPath>loragw_hal.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>12</GroupNumber>
+ <FileNumber>342</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\SX1308HAL\src\loragw_reg.cpp</PathWithFileName>
+ <FilenameWithoutPath>loragw_reg.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>12</GroupNumber>
+ <FileNumber>343</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\SX1308HAL\src\sx1308.cpp</PathWithFileName>
+ <FilenameWithoutPath>sx1308.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>SX1308HAL_inc</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>13</GroupNumber>
+ <FileNumber>344</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\SX1308HAL\inc\loragw_hal.h</PathWithFileName>
+ <FilenameWithoutPath>loragw_hal.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>13</GroupNumber>
+ <FileNumber>345</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\SX1308HAL\inc\loragw_radio.h</PathWithFileName>
+ <FilenameWithoutPath>loragw_radio.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>13</GroupNumber>
+ <FileNumber>346</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\SX1308HAL\inc\loragw_reg.h</PathWithFileName>
+ <FilenameWithoutPath>loragw_reg.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>13</GroupNumber>
+ <FileNumber>347</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\SX1308HAL\inc\sx1308.h</PathWithFileName>
+ <FilenameWithoutPath>sx1308.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+ <Group>
+ <GroupName>MAIN</GroupName>
+ <tvExp>1</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <cbSel>0</cbSel>
+ <RteFlg>0</RteFlg>
+ <File>
+ <GroupNumber>14</GroupNumber>
+ <FileNumber>348</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\MAIN\main.cpp</PathWithFileName>
+ <FilenameWithoutPath>main.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>14</GroupNumber>
+ <FileNumber>349</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\MAIN\board.cpp</PathWithFileName>
+ <FilenameWithoutPath>board.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>14</GroupNumber>
+ <FileNumber>350</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\MAIN\board.h</PathWithFileName>
+ <FilenameWithoutPath>board.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>14</GroupNumber>
+ <FileNumber>351</FileNumber>
+ <FileType>8</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\MAIN\cmdUSB.cpp</PathWithFileName>
+ <FilenameWithoutPath>cmdUSB.cpp</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ <File>
+ <GroupNumber>14</GroupNumber>
+ <FileNumber>352</FileNumber>
+ <FileType>5</FileType>
+ <tvExp>0</tvExp>
+ <tvExpOptDlg>0</tvExpOptDlg>
+ <bDave2>0</bDave2>
+ <PathWithFileName>.\MAIN\cmdUSB.h</PathWithFileName>
+ <FilenameWithoutPath>cmdUSB.h</FilenameWithoutPath>
+ <RteFlg>0</RteFlg>
+ <bShared>0</bShared>
+ </File>
+ </Group>
+
+</ProjectOpt>
diff -r 000000000000 -r c76361bd82e8 src/pgw.uvprojx
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/pgw.uvprojx Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2211 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+ <SchemaVersion>2.1</SchemaVersion>
+
+ <Header>### uVision Project, (C) Keil Software</Header>
+
+ <Targets>
+ <Target>
+ <TargetName>Pico</TargetName>
+ <ToolsetNumber>0x4</ToolsetNumber>
+ <ToolsetName>ARM-ADS</ToolsetName>
+ <pCCUsed>5060183::V5.06 update 2 (build 183)::ARMCC</pCCUsed>
+ <TargetOption>
+ <TargetCommonOption>
+ <Device>STM32F401RETx</Device>
+ <Vendor>STMicroelectronics</Vendor>
+ <PackID>Keil.STM32F4xx_DFP.2.11.0</PackID>
+ <PackURL>http://www.keil.com/pack</PackURL>
+ <Cpu>IROM(0x08000000,0x80000) IRAM(0x20000000,0x18000) CPUTYPE("Cortex-M4") FPU2 CLOCK(8000000) ELITTLE</Cpu>
+ <FlashUtilSpec></FlashUtilSpec>
+ <StartupFile></StartupFile>
+ <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_512 -FS08000000 -FL080000 -FP0($$Device:STM32F401RETx$CMSIS\Flash\STM32F4xx_512.FLM))</FlashDriverDll>
+ <DeviceId></DeviceId>
+ <RegisterFile>$$Device:STM32F401RETx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h</RegisterFile>
+ <MemoryEnv></MemoryEnv>
+ <Cmp></Cmp>
+ <Asm></Asm>
+ <Linker></Linker>
+ <OHString></OHString>
+ <InfinionOptionDll></InfinionOptionDll>
+ <SLE66CMisc></SLE66CMisc>
+ <SLE66AMisc></SLE66AMisc>
+ <SLE66LinkerMisc></SLE66LinkerMisc>
+ <SFDFile>$$Device:STM32F401RETx$CMSIS\SVD\STM32F401xE.svd</SFDFile>
+ <bCustSvd>0</bCustSvd>
+ <UseEnv>0</UseEnv>
+ <BinPath></BinPath>
+ <IncludePath></IncludePath>
+ <LibPath></LibPath>
+ <RegisterFilePath></RegisterFilePath>
+ <DBRegisterFilePath></DBRegisterFilePath>
+ <TargetStatus>
+ <Error>0</Error>
+ <ExitCodeStop>0</ExitCodeStop>
+ <ButtonStop>0</ButtonStop>
+ <NotGenerated>0</NotGenerated>
+ <InvalidFlash>1</InvalidFlash>
+ </TargetStatus>
+ <OutputDirectory>..\bin\</OutputDirectory>
+ <OutputName>Pgw</OutputName>
+ <CreateExecutable>1</CreateExecutable>
+ <CreateLib>0</CreateLib>
+ <CreateHexFile>1</CreateHexFile>
+ <DebugInformation>0</DebugInformation>
+ <BrowseInformation>0</BrowseInformation>
+ <ListingPath>.\build\</ListingPath>
+ <HexFormatSelection>1</HexFormatSelection>
+ <Merge32K>0</Merge32K>
+ <CreateBatchFile>0</CreateBatchFile>
+ <BeforeCompile>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ <nStopU1X>0</nStopU1X>
+ <nStopU2X>0</nStopU2X>
+ </BeforeCompile>
+ <BeforeMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ <nStopB1X>0</nStopB1X>
+ <nStopB2X>0</nStopB2X>
+ </BeforeMake>
+ <AfterMake>
+ <RunUserProg1>0</RunUserProg1>
+ <RunUserProg2>0</RunUserProg2>
+ <UserProg1Name></UserProg1Name>
+ <UserProg2Name></UserProg2Name>
+ <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+ <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+ <nStopA1X>0</nStopA1X>
+ <nStopA2X>0</nStopA2X>
+ </AfterMake>
+ <SelectedForBatchBuild>0</SelectedForBatchBuild>
+ <SVCSIdString></SVCSIdString>
+ </TargetCommonOption>
+ <CommonProperty>
+ <UseCPPCompiler>0</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>0</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>0</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ <ComprImg>1</ComprImg>
+ </CommonProperty>
+ <DllOption>
+ <SimDllName>SARMCM3.DLL</SimDllName>
+ <SimDllArguments></SimDllArguments>
+ <SimDlgDll>DCM.DLL</SimDlgDll>
+ <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+ <TargetDllName>SARMCM3.DLL</TargetDllName>
+ <TargetDllArguments>-MPU</TargetDllArguments>
+ <TargetDlgDll>TCM.DLL</TargetDlgDll>
+ <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+ </DllOption>
+ <DebugOption>
+ <OPTHX>
+ <HexSelection>1</HexSelection>
+ <HexRangeLowAddress>0</HexRangeLowAddress>
+ <HexRangeHighAddress>0</HexRangeHighAddress>
+ <HexOffset>0</HexOffset>
+ <Oh166RecLen>16</Oh166RecLen>
+ </OPTHX>
+ </DebugOption>
+ <Utilities>
+ <Flash1>
+ <UseTargetDll>1</UseTargetDll>
+ <UseExternalTool>0</UseExternalTool>
+ <RunIndependent>0</RunIndependent>
+ <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+ <Capability>1</Capability>
+ <DriverSelection>4100</DriverSelection>
+ </Flash1>
+ <bUseTDR>1</bUseTDR>
+ <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+ <Flash3>"" ()</Flash3>
+ <Flash4></Flash4>
+ <pFcarmOut></pFcarmOut>
+ <pFcarmGrp></pFcarmGrp>
+ <pFcArmRoot></pFcArmRoot>
+ <FcArmLst>0</FcArmLst>
+ </Utilities>
+ <TargetArmAds>
+ <ArmAdsMisc>
+ <GenerateListings>0</GenerateListings>
+ <asHll>1</asHll>
+ <asAsm>1</asAsm>
+ <asMacX>1</asMacX>
+ <asSyms>1</asSyms>
+ <asFals>1</asFals>
+ <asDbgD>1</asDbgD>
+ <asForm>1</asForm>
+ <ldLst>0</ldLst>
+ <ldmm>1</ldmm>
+ <ldXref>1</ldXref>
+ <BigEnd>0</BigEnd>
+ <AdsALst>1</AdsALst>
+ <AdsACrf>1</AdsACrf>
+ <AdsANop>0</AdsANop>
+ <AdsANot>0</AdsANot>
+ <AdsLLst>1</AdsLLst>
+ <AdsLmap>1</AdsLmap>
+ <AdsLcgr>1</AdsLcgr>
+ <AdsLsym>1</AdsLsym>
+ <AdsLszi>1</AdsLszi>
+ <AdsLtoi>1</AdsLtoi>
+ <AdsLsun>1</AdsLsun>
+ <AdsLven>1</AdsLven>
+ <AdsLsxf>1</AdsLsxf>
+ <RvctClst>0</RvctClst>
+ <GenPPlst>0</GenPPlst>
+ <AdsCpuType>"Cortex-M4"</AdsCpuType>
+ <RvctDeviceName></RvctDeviceName>
+ <mOS>0</mOS>
+ <uocRom>0</uocRom>
+ <uocRam>0</uocRam>
+ <hadIROM>1</hadIROM>
+ <hadIRAM>1</hadIRAM>
+ <hadXRAM>0</hadXRAM>
+ <uocXRam>0</uocXRam>
+ <RvdsVP>2</RvdsVP>
+ <hadIRAM2>0</hadIRAM2>
+ <hadIROM2>0</hadIROM2>
+ <StupSel>8</StupSel>
+ <useUlib>0</useUlib>
+ <EndSel>0</EndSel>
+ <uLtcg>0</uLtcg>
+ <nSecure>0</nSecure>
+ <RoSelD>3</RoSelD>
+ <RwSelD>3</RwSelD>
+ <CodeSel>0</CodeSel>
+ <OptFeed>0</OptFeed>
+ <NoZi1>0</NoZi1>
+ <NoZi2>0</NoZi2>
+ <NoZi3>0</NoZi3>
+ <NoZi4>0</NoZi4>
+ <NoZi5>0</NoZi5>
+ <Ro1Chk>0</Ro1Chk>
+ <Ro2Chk>0</Ro2Chk>
+ <Ro3Chk>0</Ro3Chk>
+ <Ir1Chk>1</Ir1Chk>
+ <Ir2Chk>0</Ir2Chk>
+ <Ra1Chk>0</Ra1Chk>
+ <Ra2Chk>0</Ra2Chk>
+ <Ra3Chk>0</Ra3Chk>
+ <Im1Chk>1</Im1Chk>
+ <Im2Chk>0</Im2Chk>
+ <OnChipMemories>
+ <Ocm1>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm1>
+ <Ocm2>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm2>
+ <Ocm3>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm3>
+ <Ocm4>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm4>
+ <Ocm5>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm5>
+ <Ocm6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </Ocm6>
+ <IRAM>
+ <Type>0</Type>
+ <StartAddress>0x20000000</StartAddress>
+ <Size>0x18000</Size>
+ </IRAM>
+ <IROM>
+ <Type>1</Type>
+ <StartAddress>0x8000000</StartAddress>
+ <Size>0x80000</Size>
+ </IROM>
+ <XRAM>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </XRAM>
+ <OCR_RVCT1>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT1>
+ <OCR_RVCT2>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT2>
+ <OCR_RVCT3>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT3>
+ <OCR_RVCT4>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x80000</Size>
+ </OCR_RVCT4>
+ <OCR_RVCT5>
+ <Type>1</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT5>
+ <OCR_RVCT6>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT6>
+ <OCR_RVCT7>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT7>
+ <OCR_RVCT8>
+ <Type>0</Type>
+ <StartAddress>0x0</StartAddress>
+ <Size>0x0</Size>
+ </OCR_RVCT8>
+ <OCR_RVCT9>
+ <Type>0</Type>
+ <StartAddress>0x10000000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT9>
+ <OCR_RVCT10>
+ <Type>0</Type>
+ <StartAddress>0x2007c000</StartAddress>
+ <Size>0x8000</Size>
+ </OCR_RVCT10>
+ </OnChipMemories>
+ <RvctStartVector></RvctStartVector>
+ </ArmAdsMisc>
+ <Cads>
+ <interw>0</interw>
+ <Optim>3</Optim>
+ <oTime>0</oTime>
+ <SplitLS>0</SplitLS>
+ <OneElfS>0</OneElfS>
+ <Strict>0</Strict>
+ <EnumInt>0</EnumInt>
+ <PlainCh>0</PlainCh>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>0</uThumb>
+ <uSurpInc>0</uSurpInc>
+ <uC99>1</uC99>
+ <useXO>0</useXO>
+ <v6Lang>1</v6Lang>
+ <v6LangP>1</v6LangP>
+ <vShortEn>1</vShortEn>
+ <vShortWch>1</vShortWch>
+ <v6Lto>0</v6Lto>
+ <v6WtE>0</v6WtE>
+ <VariousControls>
+ <MiscControls> -DDEVICE_RTC=1 -DTARGET_NUCLEO_F401RE -DDEVICE_SLEEP=1 -DTOOLCHAIN_object -DTOOLCHAIN_ARM_STD --preinclude=mbed_config.h -DTARGET_STM32F401RE -DTARGET_STM32F4 -D__ASSERT_MSG --no_rtti -Otime -DDEVICE_PORTINOUT=1 -DTARGET_FF_MORPHO -DTARGET_FF_ARDUINO -c -DTARGET_RTOS_M4_M7 -O3 -DDEVICE_SPISLAVE=1 -DDEVICE_PORTOUT=1 -DDEVICE_STDIO_MESSAGES=1 -DTARGET_RELEASE --split_sections -DDEVICE_SERIAL_FC=1 --cpu=Cortex-M4.fp -DDEVICE_SERIAL=1 -DDEVICE_ANALOGIN=1 -DTARGET_LIKE_CORTEX_M4 -DARM_MATH_CM4 -DDEVICE_ERROR_RED=1 -DTARGET_CORTEX_M -DDEVICE_I2C=1 -D__CORTEX_M4 -DTARGET_STM -DTOOLCHAIN_ARM -DDEVICE_INTERRUPTIN=1 --no_depend_system_headers -DTARGET_UVISOR_UNSUPPORTED --md -DDEVICE_PWMOUT=1 -DDEVICE_SERIAL_ASYNCH=1 --gnu --apcs=interwork -DDEVICE_SPI=1 -D__MBED__=1 -DMBED_BUILD_TIMESTAMP=1475225460.12 -DDEVICE_PORTIN=1 -DTARGET_M4 -D__FPU_PRESENT=1 -DDEVICE_I2CSLAVE=1 -D__CMSIS_RTOS -D__MBED_CMSIS_RTOS_CM -DTARGET_LIKE_MBED</MiscControls>
+ <Define>V2</Define>
+ <Undefine></Undefine>
+ <IncludePath>.;mbed-dev;mbed-dev/hal;mbed-dev/hal/storage_abstraction;mbed-dev/api;mbed-dev/targets;mbed-dev/targets/hal;mbed-dev/targets/hal/TARGET_STM;mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4;mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE;mbed-dev/targets/cmsis;mbed-dev/targets/cmsis/TARGET_STM;mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4;mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE;mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD;mbed-dev/common;.\MAIN;.\usb_cdc\Inc;.\CmdUSB\inc;.\SX1308HAL\inc</IncludePath>
+ </VariousControls>
+ </Cads>
+ <Aads>
+ <interw>0</interw>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <thumb>0</thumb>
+ <SplitLS>0</SplitLS>
+ <SwStkChk>0</SwStkChk>
+ <NoWarn>0</NoWarn>
+ <uSurpInc>0</uSurpInc>
+ <useXO>0</useXO>
+ <VariousControls>
+ <MiscControls> --cpreproc --cpreproc_opts=-D__ASSERT_MSG,-D__CMSIS_RTOS,-DARM_MATH_CM4,-D__CORTEX_M4,-D__MBED_CMSIS_RTOS_CM,-D__FPU_PRESENT=1</MiscControls>
+ <Define>V2</Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Aads>
+ <LDads>
+ <umfTarg>0</umfTarg>
+ <Ropi>0</Ropi>
+ <Rwpi>0</Rwpi>
+ <noStLib>0</noStLib>
+ <RepFail>0</RepFail>
+ <useFile>0</useFile>
+ <TextAddressRange>0</TextAddressRange>
+ <DataAddressRange>0</DataAddressRange>
+ <pXoBase></pXoBase>
+ <ScatterFile>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f401xe.sct</ScatterFile>
+ <IncludeLibs></IncludeLibs>
+ <IncludeLibsPath></IncludeLibsPath>
+ <Misc></Misc>
+ <LinkerInputFile></LinkerInputFile>
+ <DisabledWarnings></DisabledWarnings>
+ </LDads>
+ </TargetArmAds>
+ </TargetOption>
+ <Groups>
+ <Group>
+ <GroupName>TARGET_NUCLEO_F401RE</GroupName>
+ <Files>
+ <File>
+ <FileName>cmsis.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis.h</FilePath>
+ </File>
+ <File>
+ <FileName>cmsis_nvic.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.c</FilePath>
+ </File>
+ <File>
+ <FileName>cmsis_nvic.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.h</FilePath>
+ </File>
+ <File>
+ <FileName>hal_tick.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.c</FilePath>
+ </File>
+ <File>
+ <FileName>hal_tick.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.h</FilePath>
+ </File>
+ <File>
+ <FileName>objects.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h</FilePath>
+ </File>
+ <File>
+ <FileName>PeripheralNames.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h</FilePath>
+ </File>
+ <File>
+ <FileName>PeripheralPins.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c</FilePath>
+ </File>
+ <File>
+ <FileName>PinNames.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h</FilePath>
+ </File>
+ <File>
+ <FileName>PortNames.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f401xc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f401xc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_conf.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h</FilePath>
+ </File>
+ <File>
+ <FileName>system_stm32f4xx.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.c</FilePath>
+ </File>
+ <File>
+ <FileName>system_stm32f4xx.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.h</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>TARGET_STM32F4</GroupName>
+ <Files>
+ <File>
+ <FileName>analogin_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>analogout_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>can_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/can_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>common_objects.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/common_objects.h</FilePath>
+ </File>
+ <File>
+ <FileName>device.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/device.h</FilePath>
+ </File>
+ <File>
+ <FileName>entropy_hardware_poll.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/entropy_hardware_poll.c</FilePath>
+ </File>
+ <File>
+ <FileName>gpio_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>gpio_irq_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>gpio_object.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_object.h</FilePath>
+ </File>
+ <File>
+ <FileName>i2c_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_overrides.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c</FilePath>
+ </File>
+ <File>
+ <FileName>PeripheralPins.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/PeripheralPins.h</FilePath>
+ </File>
+ <File>
+ <FileName>pinmap.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c</FilePath>
+ </File>
+ <File>
+ <FileName>port_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>pwmout_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>rtc_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>serial_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>sleep.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c</FilePath>
+ </File>
+ <File>
+ <FileName>spi_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32_hal_legacy.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32_hal_legacy.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_adc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_adc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_adc_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_adc_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_adc_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_can.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_can.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_can.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_cec.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_cec.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_conf_template.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_conf_template.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_cortex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_cortex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cortex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_crc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_crc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_crc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_cryp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_cryp.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_cryp_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_cryp_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cryp_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dac.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dac.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dac_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dac_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dac_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dcmi.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dcmi.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dcmi_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dcmi_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dcmi_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_def.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_def.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dfsdm.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dfsdm.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dfsdm.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dma.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dma.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dma2d.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dma2d.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma2d.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dma_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dma_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dma_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dsi.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_dsi.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_dsi.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_eth.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_eth.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_eth.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_flash.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_flash.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_flash_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_flash_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_flash_ramfunc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_flash_ramfunc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_fmpi2c.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_fmpi2c.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_fmpi2c_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_fmpi2c_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_gpio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_gpio.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_gpio_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_hash.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_hash.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_hash_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_hash_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_hcd.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_hcd.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_i2c.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_i2c.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_i2c_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_i2c_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_i2s.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_i2s.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_i2s_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_i2s_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_irda.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_irda.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_iwdg.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_iwdg.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_lptim.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_lptim.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_ltdc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_ltdc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_ltdc_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_ltdc_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_msp_template.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_msp_template.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_nand.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_nand.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_nor.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_nor.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pccard.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pccard.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pcd.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pcd.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pcd_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pcd_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pwr.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pwr.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pwr_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_pwr_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_qspi.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_qspi.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rcc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rcc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rcc_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rcc_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rng.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rng.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rtc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rtc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rtc_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_rtc_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sai.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sai.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sai_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sai_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sd.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sd.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sdram.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sdram.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_smartcard.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_smartcard.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_spdifrx.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_spdifrx.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_spi.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_spi.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sram.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_sram.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_tim.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_tim.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_tim_ex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_tim_ex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_uart.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_uart.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_usart.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_usart.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_wwdg.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_wwdg.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_ll_fmc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_ll_fmc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_ll_fsmc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_ll_fsmc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_ll_sdmmc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_ll_sdmmc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_ll_usb.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.c</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_ll_usb.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.h</FilePath>
+ </File>
+ <File>
+ <FileName>us_ticker.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>TOOLCHAIN_ARM_STD</GroupName>
+ <Files>
+ <File>
+ <FileName>startup_stm32f401xe.S</FileName>
+ <FileType>2</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.S</FilePath>
+ </File>
+ <File>
+ <FileName>sys.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.cpp</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>api</GroupName>
+ <Files>
+ <File>
+ <FileName>AnalogIn.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/AnalogIn.h</FilePath>
+ </File>
+ <File>
+ <FileName>AnalogOut.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/AnalogOut.h</FilePath>
+ </File>
+ <File>
+ <FileName>BusIn.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/BusIn.h</FilePath>
+ </File>
+ <File>
+ <FileName>BusInOut.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/BusInOut.h</FilePath>
+ </File>
+ <File>
+ <FileName>BusOut.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/BusOut.h</FilePath>
+ </File>
+ <File>
+ <FileName>Callback.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/Callback.h</FilePath>
+ </File>
+ <File>
+ <FileName>CallChain.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/CallChain.h</FilePath>
+ </File>
+ <File>
+ <FileName>CAN.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/CAN.h</FilePath>
+ </File>
+ <File>
+ <FileName>can_helper.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/can_helper.h</FilePath>
+ </File>
+ <File>
+ <FileName>CircularBuffer.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/CircularBuffer.h</FilePath>
+ </File>
+ <File>
+ <FileName>critical.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/critical.h</FilePath>
+ </File>
+ <File>
+ <FileName>CThunk.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/CThunk.h</FilePath>
+ </File>
+ <File>
+ <FileName>DigitalIn.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/DigitalIn.h</FilePath>
+ </File>
+ <File>
+ <FileName>DigitalInOut.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/DigitalInOut.h</FilePath>
+ </File>
+ <File>
+ <FileName>DigitalOut.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/DigitalOut.h</FilePath>
+ </File>
+ <File>
+ <FileName>DirHandle.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/DirHandle.h</FilePath>
+ </File>
+ <File>
+ <FileName>Ethernet.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/Ethernet.h</FilePath>
+ </File>
+ <File>
+ <FileName>FileBase.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/FileBase.h</FilePath>
+ </File>
+ <File>
+ <FileName>FileHandle.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/FileHandle.h</FilePath>
+ </File>
+ <File>
+ <FileName>FileLike.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/FileLike.h</FilePath>
+ </File>
+ <File>
+ <FileName>FilePath.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/FilePath.h</FilePath>
+ </File>
+ <File>
+ <FileName>FileSystemLike.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/FileSystemLike.h</FilePath>
+ </File>
+ <File>
+ <FileName>FunctionPointer.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/FunctionPointer.h</FilePath>
+ </File>
+ <File>
+ <FileName>I2C.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/I2C.h</FilePath>
+ </File>
+ <File>
+ <FileName>I2CSlave.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/I2CSlave.h</FilePath>
+ </File>
+ <File>
+ <FileName>InterruptIn.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/InterruptIn.h</FilePath>
+ </File>
+ <File>
+ <FileName>InterruptManager.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/InterruptManager.h</FilePath>
+ </File>
+ <File>
+ <FileName>LocalFileSystem.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/LocalFileSystem.h</FilePath>
+ </File>
+ <File>
+ <FileName>LowPowerTicker.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/LowPowerTicker.h</FilePath>
+ </File>
+ <File>
+ <FileName>LowPowerTimeout.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/LowPowerTimeout.h</FilePath>
+ </File>
+ <File>
+ <FileName>LowPowerTimer.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/LowPowerTimer.h</FilePath>
+ </File>
+ <File>
+ <FileName>mbed.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/mbed.h</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_assert.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/mbed_assert.h</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_debug.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/mbed_debug.h</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_error.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/mbed_error.h</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_interface.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/mbed_interface.h</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_mem_trace.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/mbed_mem_trace.h</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_stats.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/mbed_stats.h</FilePath>
+ </File>
+ <File>
+ <FileName>platform.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/platform.h</FilePath>
+ </File>
+ <File>
+ <FileName>PlatformMutex.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/PlatformMutex.h</FilePath>
+ </File>
+ <File>
+ <FileName>PortIn.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/PortIn.h</FilePath>
+ </File>
+ <File>
+ <FileName>PortInOut.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/PortInOut.h</FilePath>
+ </File>
+ <File>
+ <FileName>PortOut.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/PortOut.h</FilePath>
+ </File>
+ <File>
+ <FileName>PwmOut.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/PwmOut.h</FilePath>
+ </File>
+ <File>
+ <FileName>RawSerial.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/RawSerial.h</FilePath>
+ </File>
+ <File>
+ <FileName>rtc_time.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/rtc_time.h</FilePath>
+ </File>
+ <File>
+ <FileName>semihost_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/semihost_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>Serial.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/Serial.h</FilePath>
+ </File>
+ <File>
+ <FileName>SerialBase.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/SerialBase.h</FilePath>
+ </File>
+ <File>
+ <FileName>SingletonPtr.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/SingletonPtr.h</FilePath>
+ </File>
+ <File>
+ <FileName>SPI.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/SPI.h</FilePath>
+ </File>
+ <File>
+ <FileName>SPISlave.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/SPISlave.h</FilePath>
+ </File>
+ <File>
+ <FileName>Stream.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/Stream.h</FilePath>
+ </File>
+ <File>
+ <FileName>Ticker.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/Ticker.h</FilePath>
+ </File>
+ <File>
+ <FileName>Timeout.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/Timeout.h</FilePath>
+ </File>
+ <File>
+ <FileName>Timer.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/Timer.h</FilePath>
+ </File>
+ <File>
+ <FileName>TimerEvent.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/TimerEvent.h</FilePath>
+ </File>
+ <File>
+ <FileName>toolchain.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/toolchain.h</FilePath>
+ </File>
+ <File>
+ <FileName>Transaction.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/Transaction.h</FilePath>
+ </File>
+ <File>
+ <FileName>wait_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/api/wait_api.h</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>cmsis</GroupName>
+ <Files>
+ <File>
+ <FileName>arm_common_tables.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/arm_common_tables.h</FilePath>
+ </File>
+ <File>
+ <FileName>arm_const_structs.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/arm_const_structs.h</FilePath>
+ </File>
+ <File>
+ <FileName>arm_math.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/arm_math.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_ca9.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_ca9.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_ca_mmu.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_ca_mmu.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_caFunc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_caFunc.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_caInstr.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_caInstr.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cm0.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cm0.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cm0plus.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cm0plus.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cm3.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cm3.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cm4.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cm4.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cm4_simd.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cm4_simd.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cm7.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cm7.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cmFunc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cmFunc.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cmInstr.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cmInstr.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cmSecureAccess.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cmSecureAccess.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_cmSimd.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_cmSimd.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_sc000.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_sc000.h</FilePath>
+ </File>
+ <File>
+ <FileName>core_sc300.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/targets/cmsis/core_sc300.h</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>common</GroupName>
+ <Files>
+ <File>
+ <FileName>AnalogIn.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/AnalogIn.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>BusIn.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/BusIn.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>BusInOut.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/BusInOut.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>BusOut.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/BusOut.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>CallChain.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/CallChain.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>CAN.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/CAN.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Ethernet.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/Ethernet.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>FileBase.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/FileBase.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>FileLike.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/FileLike.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>FilePath.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/FilePath.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>FileSystemLike.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/FileSystemLike.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>I2C.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/I2C.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>I2CSlave.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/I2CSlave.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>InterruptIn.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/InterruptIn.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>InterruptManager.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/InterruptManager.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>LocalFileSystem.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/LocalFileSystem.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_alloc_wrappers.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/mbed_alloc_wrappers.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_assert.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_assert.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_board.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_board.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_critical.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_critical.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_error.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_error.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_gpio.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_gpio.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_interface.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_interface.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_lp_ticker_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_lp_ticker_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_mem_trace.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_mem_trace.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_pinmap_common.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_pinmap_common.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_rtc_time.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/mbed_rtc_time.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_semihost_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_semihost_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_ticker_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_ticker_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_us_ticker_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_us_ticker_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>mbed_wait_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-dev/common/mbed_wait_api.c</FilePath>
+ </File>
+ <File>
+ <FileName>RawSerial.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/RawSerial.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>retarget.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/retarget.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Serial.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/Serial.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>SerialBase.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/SerialBase.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>SPI.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/SPI.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>SPISlave.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/SPISlave.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Stream.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/Stream.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Ticker.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/Ticker.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Timeout.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/Timeout.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Timer.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/Timer.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>TimerEvent.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-dev/common/TimerEvent.cpp</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>hal</GroupName>
+ <Files>
+ <File>
+ <FileName>analogin_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/analogin_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>analogout_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/analogout_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>buffer.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/buffer.h</FilePath>
+ </File>
+ <File>
+ <FileName>can_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/can_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>dma_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/dma_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>ethernet_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/ethernet_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>gpio_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/gpio_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>gpio_irq_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/gpio_irq_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>i2c_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/i2c_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>lp_ticker_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/lp_ticker_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>pinmap.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/pinmap.h</FilePath>
+ </File>
+ <File>
+ <FileName>port_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/port_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>pwmout_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/pwmout_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>rtc_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/rtc_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>serial_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/serial_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>sleep_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/sleep_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>spi_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/spi_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>ticker_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/ticker_api.h</FilePath>
+ </File>
+ <File>
+ <FileName>us_ticker_api.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/us_ticker_api.h</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>mbed</GroupName>
+ <Files>
+ <File>
+ <FileName>mbed_config.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed_config.h</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>storage_abstraction</GroupName>
+ <Files>
+ <File>
+ <FileName>Driver_Common.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/storage_abstraction/Driver_Common.h</FilePath>
+ </File>
+ <File>
+ <FileName>Driver_Storage.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>mbed-dev/hal/storage_abstraction/Driver_Storage.h</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>USB_CDC_src</GroupName>
+ <Files>
+ <File>
+ <FileName>stm32f4xx_it.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\usb_cdc\Src\stm32f4xx_it.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>usb_device.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\usb_cdc\Src\usb_device.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_cdc.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\usb_cdc\Src\usbd_cdc.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_cdc_if.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\usb_cdc\Src\usbd_cdc_if.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_conf.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\usb_cdc\Src\usbd_conf.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_core.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\usb_cdc\Src\usbd_core.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_ctlreq.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\usb_cdc\Src\usbd_ctlreq.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_desc.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\usb_cdc\Src\usbd_desc.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_ioreq.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\usb_cdc\Src\usbd_ioreq.cpp</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>USB_CDC_inc</GroupName>
+ <Files>
+ <File>
+ <FileName>mxconstants.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\mxconstants.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_hal_conf.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\stm32f4xx_hal_conf.h</FilePath>
+ </File>
+ <File>
+ <FileName>stm32f4xx_it.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\stm32f4xx_it.h</FilePath>
+ </File>
+ <File>
+ <FileName>usb_device.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\usb_device.h</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_cdc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\usbd_cdc.h</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_cdc_if.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\usbd_cdc_if.h</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_conf.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\usbd_conf.h</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_core.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\usbd_core.h</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_ctlreq.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\usbd_ctlreq.h</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_def.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\usbd_def.h</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_desc.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\usbd_desc.h</FilePath>
+ </File>
+ <File>
+ <FileName>usbd_ioreq.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\usb_cdc\Inc\usbd_ioreq.h</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>SX1308HAL_src</GroupName>
+ <Files>
+ <File>
+ <FileName>loragw_hal.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\SX1308HAL\src\loragw_hal.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>loragw_reg.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\SX1308HAL\src\loragw_reg.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>sx1308.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\SX1308HAL\src\sx1308.cpp</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>SX1308HAL_inc</GroupName>
+ <Files>
+ <File>
+ <FileName>loragw_hal.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\SX1308HAL\inc\loragw_hal.h</FilePath>
+ </File>
+ <File>
+ <FileName>loragw_radio.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\SX1308HAL\inc\loragw_radio.h</FilePath>
+ </File>
+ <File>
+ <FileName>loragw_reg.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\SX1308HAL\inc\loragw_reg.h</FilePath>
+ </File>
+ <File>
+ <FileName>sx1308.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\SX1308HAL\inc\sx1308.h</FilePath>
+ </File>
+ </Files>
+ </Group>
+ <Group>
+ <GroupName>MAIN</GroupName>
+ <Files>
+ <File>
+ <FileName>main.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\MAIN\main.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>board.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\MAIN\board.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>board.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\MAIN\board.h</FilePath>
+ </File>
+ <File>
+ <FileName>cmdUSB.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>.\MAIN\cmdUSB.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>cmdUSB.h</FileName>
+ <FileType>5</FileType>
+ <FilePath>.\MAIN\cmdUSB.h</FilePath>
+ </File>
+ </Files>
+ </Group>
+ </Groups>
+ </Target>
+ </Targets>
+
+</Project>
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/mxconstants.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/usb_cdc/Inc/mxconstants.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,57 @@ +/** + ****************************************************************************** + * File Name : mxconstants.h + * Description : This file contains the common defines of the application + ****************************************************************************** + * + * COPYRIGHT(c) 2016 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MXCONSTANT_H +#define __MXCONSTANT_H + /* Includes ------------------------------------------------------------------*/ + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private define ------------------------------------------------------------*/ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +/** + * @} + */ + +/** + * @} +*/ + +#endif /* __MXCONSTANT_H */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/stm32f4xx_hal_conf.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/stm32f4xx_hal_conf.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,452 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "mxconstants.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+
+/* #define HAL_ADC_MODULE_ENABLED */
+/* #define HAL_CAN_MODULE_ENABLED */
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_CRYP_MODULE_ENABLED */
+/* #define HAL_DAC_MODULE_ENABLED */
+/* #define HAL_DCMI_MODULE_ENABLED */
+/* #define HAL_DMA2D_MODULE_ENABLED */
+/* #define HAL_ETH_MODULE_ENABLED */
+/* #define HAL_NAND_MODULE_ENABLED */
+/* #define HAL_NOR_MODULE_ENABLED */
+/* #define HAL_PCCARD_MODULE_ENABLED */
+/* #define HAL_SRAM_MODULE_ENABLED */
+/* #define HAL_SDRAM_MODULE_ENABLED */
+/* #define HAL_HASH_MODULE_ENABLED */
+/* #define HAL_I2C_MODULE_ENABLED */
+/* #define HAL_I2S_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_LTDC_MODULE_ENABLED */
+/* #define HAL_RNG_MODULE_ENABLED */
+/* #define HAL_RTC_MODULE_ENABLED */
+/* #define HAL_SAI_MODULE_ENABLED */
+/* #define HAL_SD_MODULE_ENABLED */
+/* #define HAL_SPI_MODULE_ENABLED */
+/* #define HAL_TIM_MODULE_ENABLED */
+/* #define HAL_UART_MODULE_ENABLED */
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
+#define HAL_PCD_MODULE_ENABLED
+/* #define HAL_HCD_MODULE_ENABLED */
+/* #define HAL_DSI_MODULE_ENABLED */
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_CEC_MODULE_ENABLED */
+/* #define HAL_FMPI2C_MODULE_ENABLED */
+/* #define HAL_SPDIFRX_MODULE_ENABLED */
+/* #define HAL_DFSDM_MODULE_ENABLED */
+/* #define HAL_LPTIM_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 1U
+#define INSTRUCTION_CACHE_ENABLE 1U
+#define DATA_CACHE_ENABLE 1U
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2U
+#define MAC_ADDR1 0U
+#define MAC_ADDR2 0U
+#define MAC_ADDR3 0U
+#define MAC_ADDR4 0U
+#define MAC_ADDR5 0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/
+#define DP83848_PHY_ADDRESS 0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x0010U) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x0011U) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x0012U) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001U) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002U) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001U) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020U) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000U) /*!< PHY link status interrupt mask */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/stm32f4xx_it.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/stm32f4xx_it.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,65 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_it.h
+ * @brief This file contains the headers of the interrupt handlers.
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_IT_H
+#define __STM32F4xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void OTG_FS_IRQHandler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usb_device.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usb_device.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,63 @@
+/**
+ ******************************************************************************
+ * @file : USB_DEVICE
+ * @version : v1.0_Cube
+ * @brief : Header for usb_device file.
+ ******************************************************************************
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __usb_device_H
+#define __usb_device_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+#include "stm32f4xx_hal.h"
+#include "usbd_def.h"
+
+extern USBD_HandleTypeDef hUsbDeviceFS;
+
+/* USB_Device init function */
+void MX_USB_DEVICE_Init(void);
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__usb_device_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usbd_cdc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_cdc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,179 @@
+/**
+ ******************************************************************************
+ * @file usbd_cdc.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief header file for the usbd_cdc.c file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CDC_H
+#define __USB_CDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup usbd_cdc
+ * @brief This file is the Header file for usbd_cdc.c
+ * @{
+ */
+
+
+/** @defgroup usbd_cdc_Exported_Defines
+ * @{
+ */
+#define CDC_IN_EP 0x81 /* EP1 for data IN */
+#define CDC_OUT_EP 0x01 /* EP1 for data OUT */
+#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */
+
+/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
+#define CDC_DATA_HS_MAX_PACKET_SIZE 512 /* Endpoint IN & OUT Packet size */
+#define CDC_DATA_FS_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */
+#define CDC_CMD_PACKET_SIZE 8 /* Control Endpoint Packet size */
+
+#define USB_CDC_CONFIG_DESC_SIZ 67
+#define CDC_DATA_HS_IN_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
+#define CDC_DATA_HS_OUT_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
+
+#define CDC_DATA_FS_IN_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
+#define CDC_DATA_FS_OUT_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
+
+/*---------------------------------------------------------------------*/
+/* CDC definitions */
+/*---------------------------------------------------------------------*/
+#define CDC_SEND_ENCAPSULATED_COMMAND 0x00
+#define CDC_GET_ENCAPSULATED_RESPONSE 0x01
+#define CDC_SET_COMM_FEATURE 0x02
+#define CDC_GET_COMM_FEATURE 0x03
+#define CDC_CLEAR_COMM_FEATURE 0x04
+#define CDC_SET_LINE_CODING 0x20
+#define CDC_GET_LINE_CODING 0x21
+#define CDC_SET_CONTROL_LINE_STATE 0x22
+#define CDC_SEND_BREAK 0x23
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+typedef struct
+{
+ uint32_t bitrate;
+ uint8_t format;
+ uint8_t paritytype;
+ uint8_t datatype;
+}USBD_CDC_LineCodingTypeDef;
+
+typedef struct _USBD_CDC_Itf
+{
+ int8_t (* Init) (void);
+ int8_t (* DeInit) (void);
+ int8_t (* Control) (uint8_t, uint8_t * , uint16_t);
+ int8_t (* Receive) (uint8_t *, uint32_t *);
+
+}USBD_CDC_ItfTypeDef;
+
+
+typedef struct
+{
+ uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE/4]; /* Force 32bits alignment */
+ uint8_t CmdOpCode;
+ uint8_t CmdLength;
+ uint8_t *RxBuffer;
+ uint8_t *TxBuffer;
+ uint32_t RxLength;
+ uint32_t TxLength;
+
+ __IO uint32_t TxState;
+ __IO uint32_t RxState;
+}
+USBD_CDC_HandleTypeDef;
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+
+extern USBD_ClassTypeDef USBD_CDC;
+#define USBD_CDC_CLASS &USBD_CDC
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Exported_Functions
+ * @{
+ */
+uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev,
+ USBD_CDC_ItfTypeDef *fops);
+
+uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff,
+ uint16_t length);
+
+uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff);
+
+uint8_t USBD_CDC_ReceivePacket (USBD_HandleTypeDef *pdev);
+
+uint8_t USBD_CDC_TransmitPacket (USBD_HandleTypeDef *pdev);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_CDC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usbd_cdc_if.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_cdc_if.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,121 @@
+/**
+ ******************************************************************************
+ * @file : usbd_cdc_if.h
+ * @brief : Header for usbd_cdc_if file.
+ ******************************************************************************
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CDC_IF_H
+#define __USBD_CDC_IF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc.h"
+/* USER CODE BEGIN INCLUDE */
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CDC_IF
+ * @brief header
+ * @{
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_Defines
+ * @{
+ */
+/* USER CODE BEGIN EXPORTED_DEFINES */
+/* USER CODE END EXPORTED_DEFINES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_Types
+ * @{
+ */
+/* USER CODE BEGIN EXPORTED_TYPES */
+/* USER CODE END EXPORTED_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_Macros
+ * @{
+ */
+/* USER CODE BEGIN EXPORTED_MACRO */
+/* USER CODE END EXPORTED_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_AUDIO_IF_Exported_Variables
+ * @{
+ */
+extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
+
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype
+ * @{
+ */
+uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
+int8_t CDC_Receive_FSP(uint8_t* Buf, uint32_t *Len);
+/* USER CODE BEGIN EXPORTED_FUNCTIONS */
+/* USER CODE END EXPORTED_FUNCTIONS */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CDC_IF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usbd_conf.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_conf.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,172 @@
+/**
+ ******************************************************************************
+ * @file : usbd_conf.h
+ * @version : v1.0_Cube
+ * @brief : Header for usbd_conf file.
+ ******************************************************************************
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CONF__H__
+#define __USBD_CONF__H__
+#ifdef __cplusplus
+ extern "C" {
+#endif
+/* Includes ------------------------------------------------------------------*/
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "stm32f4xx.h"
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup USBD_OTG_DRIVER
+ * @{
+ */
+
+/** @defgroup USBD_CONF
+ * @brief usb otg low level driver configuration file
+ * @{
+ */
+
+/** @defgroup USBD_CONF_Exported_Defines
+ * @{
+ */
+
+/*---------- -----------*/
+#define USBD_MAX_NUM_INTERFACES 1
+/*---------- -----------*/
+#define USBD_MAX_NUM_CONFIGURATION 1
+/*---------- -----------*/
+#define USBD_MAX_STR_DESC_SIZ 512
+/*---------- -----------*/
+#define USBD_SUPPORT_USER_STRING 0
+/*---------- -----------*/
+#define USBD_DEBUG_LEVEL 0
+/*---------- -----------*/
+#define USBD_LPM_ENABLED 0
+/*---------- -----------*/
+#define USBD_SELF_POWERED 1
+/*---------- -----------*/
+#define USBD_CDC_INTERVAL 1000
+
+/****************************************/
+/* #define for FS and HS identification */
+#define DEVICE_FS 0
+#define DEVICE_HS 1
+
+/** @defgroup USBD_Exported_Macros
+ * @{
+ */
+
+ /* Memory management macros */
+#define USBD_malloc malloc
+#define USBD_free free
+#define USBD_memset memset
+#define USBD_memcpy memcpy
+
+#define USBD_Delay HAL_Delay
+
+ /* DEBUG macros */
+
+#if (USBD_DEBUG_LEVEL > 0)
+#define USBD_UsrLog(...) printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_UsrLog(...)
+#endif
+
+
+#if (USBD_DEBUG_LEVEL > 1)
+
+#define USBD_ErrLog(...) printf("ERROR: ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_ErrLog(...)
+#endif
+
+
+#if (USBD_DEBUG_LEVEL > 2)
+#define USBD_DbgLog(...) printf("DEBUG : ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_DbgLog(...)
+#endif
+
+/**
+ * @}
+ */
+
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_FunctionsPrototype
+ * @{
+ */
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CONF__H__ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usbd_core.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_core.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,167 @@
+/**
+ ******************************************************************************
+ * @file usbd_core.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for usbd_core.c file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CORE_H
+#define __USBD_CORE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+#include "usbd_def.h"
+#include "usbd_ioreq.h"
+#include "usbd_ctlreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CORE
+ * @brief This file is the Header file for usbd_core.c file
+ * @{
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+#define USBD_SOF USBD_LL_SOF
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_FunctionsPrototype
+ * @{
+ */
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass);
+
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
+
+/* USBD Low Level Driver */
+USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps);
+
+USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
+USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+void USBD_LL_Delay (uint32_t Delay);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CORE_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usbd_ctlreq.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_ctlreq.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,113 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for the usbd_req.c file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_REQUEST_H
+#define __USB_REQUEST_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_REQ
+ * @brief header file for the usbd_req.c file
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_REQ_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+
+void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
+
+void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_REQUEST_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usbd_def.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_def.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,330 @@
+/**
+ ******************************************************************************
+ * @file usbd_def.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief General defines for the usb device library
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DEF_H
+#define __USBD_DEF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DEF
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DEF_Exported_Defines
+ * @{
+ */
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+
+#define USB_LEN_DEV_QUALIFIER_DESC 0x0A
+#define USB_LEN_DEV_DESC 0x12
+#define USB_LEN_CFG_DESC 0x09
+#define USB_LEN_IF_DESC 0x09
+#define USB_LEN_EP_DESC 0x07
+#define USB_LEN_OTG_DESC 0x03
+#define USB_LEN_LANGID_STR_DESC 0x04
+#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09
+
+#define USBD_IDX_LANGID_STR 0x00
+#define USBD_IDX_MFC_STR 0x01
+#define USBD_IDX_PRODUCT_STR 0x02
+#define USBD_IDX_SERIAL_STR 0x03
+#define USBD_IDX_CONFIG_STR 0x04
+#define USBD_IDX_INTERFACE_STR 0x05
+
+#define USB_REQ_TYPE_STANDARD 0x00
+#define USB_REQ_TYPE_CLASS 0x20
+#define USB_REQ_TYPE_VENDOR 0x40
+#define USB_REQ_TYPE_MASK 0x60
+
+#define USB_REQ_RECIPIENT_DEVICE 0x00
+#define USB_REQ_RECIPIENT_INTERFACE 0x01
+#define USB_REQ_RECIPIENT_ENDPOINT 0x02
+#define USB_REQ_RECIPIENT_MASK 0x03
+
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+
+#define USB_DESC_TYPE_DEVICE 1
+#define USB_DESC_TYPE_CONFIGURATION 2
+#define USB_DESC_TYPE_STRING 3
+#define USB_DESC_TYPE_INTERFACE 4
+#define USB_DESC_TYPE_ENDPOINT 5
+#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
+#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
+#define USB_DESC_TYPE_BOS 0x0F
+
+#define USB_CONFIG_REMOTE_WAKEUP 2
+#define USB_CONFIG_SELF_POWERED 1
+
+#define USB_FEATURE_EP_HALT 0
+#define USB_FEATURE_REMOTE_WAKEUP 1
+#define USB_FEATURE_TEST_MODE 2
+
+#define USB_DEVICE_CAPABITY_TYPE 0x10
+
+#define USB_HS_MAX_PACKET_SIZE 512
+#define USB_FS_MAX_PACKET_SIZE 256
+#define USB_MAX_EP0_SIZE 64
+
+/* Device Status */
+#define USBD_STATE_DEFAULT 1
+#define USBD_STATE_ADDRESSED 2
+#define USBD_STATE_CONFIGURED 3
+#define USBD_STATE_SUSPENDED 4
+
+
+/* EP0 State */
+#define USBD_EP0_IDLE 0
+#define USBD_EP0_SETUP 1
+#define USBD_EP0_DATA_IN 2
+#define USBD_EP0_DATA_OUT 3
+#define USBD_EP0_STATUS_IN 4
+#define USBD_EP0_STATUS_OUT 5
+#define USBD_EP0_STALL 6
+
+#define USBD_EP_TYPE_CTRL 0
+#define USBD_EP_TYPE_ISOC 1
+#define USBD_EP_TYPE_BULK 2
+#define USBD_EP_TYPE_INTR 3
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DEF_Exported_TypesDefinitions
+ * @{
+ */
+
+typedef struct usb_setup_req
+{
+
+ uint8_t bmRequest;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+}USBD_SetupReqTypedef;
+
+struct _USBD_HandleTypeDef;
+
+typedef struct _Device_cb
+{
+ uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ /* Control Endpoints*/
+ uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
+ uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
+ uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
+ /* Class Specific Endpoints*/
+ uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
+ uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+
+ uint8_t *(*GetHSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetFSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length);
+#if (USBD_SUPPORT_USER_STRING == 1)
+ uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index, uint16_t *length);
+#endif
+
+} USBD_ClassTypeDef;
+
+/* Following USB Device Speed */
+typedef enum
+{
+ USBD_SPEED_HIGH = 0,
+ USBD_SPEED_FULL = 1,
+ USBD_SPEED_LOW = 2,
+}USBD_SpeedTypeDef;
+
+/* Following USB Device status */
+typedef enum {
+ USBD_OK = 0,
+ USBD_BUSY,
+ USBD_FAIL,
+}USBD_StatusTypeDef;
+
+/* USB Device descriptors structure */
+typedef struct
+{
+ uint8_t *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#if (USBD_LPM_ENABLED == 1)
+ uint8_t *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#endif
+} USBD_DescriptorsTypeDef;
+
+/* USB Device handle structure */
+typedef struct
+{
+ uint32_t status;
+ uint32_t total_length;
+ uint32_t rem_length;
+ uint32_t maxpacket;
+} USBD_EndpointTypeDef;
+
+/* USB Device handle structure */
+typedef struct _USBD_HandleTypeDef
+{
+ uint8_t id;
+ uint32_t dev_config;
+ uint32_t dev_default_config;
+ uint32_t dev_config_status;
+ USBD_SpeedTypeDef dev_speed;
+ USBD_EndpointTypeDef ep_in[15];
+ USBD_EndpointTypeDef ep_out[15];
+ uint32_t ep0_state;
+ uint32_t ep0_data_len;
+ uint8_t dev_state;
+ uint8_t dev_old_state;
+ uint8_t dev_address;
+ uint8_t dev_connection_status;
+ uint8_t dev_test_mode;
+ uint32_t dev_remote_wakeup;
+
+ USBD_SetupReqTypedef request;
+ USBD_DescriptorsTypeDef *pDesc;
+ USBD_ClassTypeDef *pClass;
+ void *pClassData;
+ void *pUserData;
+ void *pData;
+} USBD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_DEF_Exported_Macros
+ * @{
+ */
+#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
+ (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
+
+#define LOBYTE(x) ((uint8_t)(x & 0x00FF))
+#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8))
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define MAX(a, b) (((a) > (b)) ? (a) : (b))
+
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* In HS mode and when the DMA is used, all variables and data structures dealing
+ with the DMA during the transaction process should be 4-bytes aligned */
+
+#if defined (__GNUC__) /* GNU Compiler */
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #define __ALIGN_BEGIN
+#else
+ #define __ALIGN_END
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #elif defined (__TASKING__) /* TASKING Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #endif /* __CC_ARM */
+#endif /* __GNUC__ */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DEF_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usbd_desc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_desc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,103 @@
+/**
+ ******************************************************************************
+ * @file : usbd_desc.h
+ * @version : v1.0_Cube
+ * @brief : Header for usbd_desc file.
+ ******************************************************************************
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DESC__H__
+#define __USBD_DESC__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DESC
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DESC_Exported_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Variables
+ * @{
+ */
+extern USBD_DescriptorsTypeDef FS_Desc;
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DESC_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Inc/usbd_ioreq.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Inc/usbd_ioreq.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,128 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for the usbd_ioreq.c file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_IOREQ_H
+#define __USBD_IOREQ_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ
+ * @brief header file for the usbd_ioreq.c file
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Exported_Types
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_IOREQ_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *buf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
+
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev ,
+ uint8_t epnum);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_IOREQ_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Src/stm32f4xx_it.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Src/stm32f4xx_it.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,204 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_it.c
+ * @brief Interrupt Service Routines.
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+#include "stm32f4xx.h"
+#include "stm32f4xx_it.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern PCD_HandleTypeDef hpcd_USB_OTG_FS;
+
+/******************************************************************************/
+/* Cortex-M4 Processor Interruption and Exception Handlers */
+/******************************************************************************/
+
+/**
+* @brief This function handles Non maskable interrupt.
+*/
+void NMI_Handler(void)
+{
+ /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+ /* USER CODE END NonMaskableInt_IRQn 0 */
+ /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+ /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+* @brief This function handles Hard fault interrupt.
+*/
+void HardFault_Handler(void)
+{
+ /* USER CODE BEGIN HardFault_IRQn 0 */
+
+ /* USER CODE END HardFault_IRQn 0 */
+ while (1)
+ {
+ }
+ /* USER CODE BEGIN HardFault_IRQn 1 */
+
+ /* USER CODE END HardFault_IRQn 1 */
+}
+
+/**
+* @brief This function handles Memory management fault.
+*/
+void MemManage_Handler(void)
+{
+ /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+ /* USER CODE END MemoryManagement_IRQn 0 */
+ while (1)
+ {
+ }
+ /* USER CODE BEGIN MemoryManagement_IRQn 1 */
+
+ /* USER CODE END MemoryManagement_IRQn 1 */
+}
+
+/**
+* @brief This function handles Pre-fetch fault, memory access fault.
+*/
+void BusFault_Handler(void)
+{
+ /* USER CODE BEGIN BusFault_IRQn 0 */
+
+ /* USER CODE END BusFault_IRQn 0 */
+ while (1)
+ {
+ }
+ /* USER CODE BEGIN BusFault_IRQn 1 */
+
+ /* USER CODE END BusFault_IRQn 1 */
+}
+
+/**
+* @brief This function handles Undefined instruction or illegal state.
+*/
+void UsageFault_Handler(void)
+{
+ /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+ /* USER CODE END UsageFault_IRQn 0 */
+ while (1)
+ {
+ }
+ /* USER CODE BEGIN UsageFault_IRQn 1 */
+
+ /* USER CODE END UsageFault_IRQn 1 */
+}
+
+/**
+* @brief This function handles System service call via SWI instruction.
+*/
+void SVC_Handler(void)
+{
+ /* USER CODE BEGIN SVCall_IRQn 0 */
+
+ /* USER CODE END SVCall_IRQn 0 */
+ /* USER CODE BEGIN SVCall_IRQn 1 */
+
+ /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+* @brief This function handles Debug monitor.
+*/
+void DebugMon_Handler(void)
+{
+ /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+ /* USER CODE END DebugMonitor_IRQn 0 */
+ /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+ /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+* @brief This function handles Pendable request for system service.
+*/
+void PendSV_Handler(void)
+{
+ /* USER CODE BEGIN PendSV_IRQn 0 */
+
+ /* USER CODE END PendSV_IRQn 0 */
+ /* USER CODE BEGIN PendSV_IRQn 1 */
+
+ /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+* @brief This function handles System tick timer.
+*/
+void SysTick_Handler(void)
+{
+ /* USER CODE BEGIN SysTick_IRQn 0 */
+
+ /* USER CODE END SysTick_IRQn 0 */
+ HAL_IncTick();
+ HAL_SYSTICK_IRQHandler();
+ /* USER CODE BEGIN SysTick_IRQn 1 */
+
+ /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F4xx Peripheral Interrupt Handlers */
+/* Add here the Interrupt Handlers for the used peripherals. */
+/* For the available peripheral interrupt handler names, */
+/* please refer to the startup file (startup_stm32f4xx.s). */
+/******************************************************************************/
+
+/**
+* @brief This function handles USB On The Go FS global interrupt.
+*/
+void OTG_FS_IRQHandler(void)
+{
+ /* USER CODE BEGIN OTG_FS_IRQn 0 */
+
+ /* USER CODE END OTG_FS_IRQn 0 */
+ HAL_PCD_IRQHandler(&hpcd_USB_OTG_FS);
+ /* USER CODE BEGIN OTG_FS_IRQn 1 */
+
+ /* USER CODE END OTG_FS_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Src/usb_device.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Src/usb_device.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,69 @@
+/**
+ ******************************************************************************
+ * @file : USB_DEVICE
+ * @version : v1.0_Cube
+ * @brief : This file implements the USB Device
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "usb_device.h"
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_cdc.h"
+#include "usbd_cdc_if.h"
+
+/* USB Device Core handle declaration */
+USBD_HandleTypeDef hUsbDeviceFS;
+
+/* init function */
+void MX_USB_DEVICE_Init(void)
+{
+ /* Init Device Library,Add Supported Class and Start the library*/
+ USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS);
+
+ USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC);
+
+ USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS);
+
+ USBD_Start(&hUsbDeviceFS);
+
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Src/usbd_cdc.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Src/usbd_cdc.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,927 @@
+/**
+ ******************************************************************************
+ * @file usbd_cdc.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the high layer firmware functions to manage the
+ * following functionalities of the USB CDC Class:
+ * - Initialization and Configuration of high and low layer
+ * - Enumeration as CDC Device (and enumeration for each implemented memory interface)
+ * - OUT/IN data transfer
+ * - Command IN transfer (class requests management)
+ * - Error management
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * CDC Class Driver Description
+ * ===================================================================
+ * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices
+ * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus
+ * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007"
+ * This driver implements the following aspects of the specification:
+ * - Device descriptor management
+ * - Configuration descriptor management
+ * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN)
+ * - Requests management (as described in section 6.2 in specification)
+ * - Abstract Control Model compliant
+ * - Union Functional collection (using 1 IN endpoint for control)
+ * - Data interface class
+ *
+ * These aspects may be enriched or modified for a specific user application.
+ *
+ * This driver doesn't implement the following aspects of the specification
+ * (but it is possible to manage these features with some modifications on this driver):
+ * - Any class-specific aspect relative to communication classes should be managed by user application.
+ * - All communication classes other than PSTN are not managed
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc.h"
+#include "board.h"
+#include "usbd_desc.h"
+#include "usbd_ctlreq.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_CDC
+ * @brief usbd core module
+ * @{
+ */
+
+/** @defgroup USBD_CDC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_FunctionPrototypes
+ * @{
+ */
+
+
+static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev);
+
+static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length);
+
+uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length);
+
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
+{
+ USB_LEN_DEV_QUALIFIER_DESC,
+ USB_DESC_TYPE_DEVICE_QUALIFIER,
+ 0x00,
+ 0x02,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x40,
+ 0x01,
+ 0x00,
+};
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Variables
+ * @{
+ */
+
+
+/* CDC interface class callbacks structure */
+USBD_ClassTypeDef USBD_CDC =
+{
+ USBD_CDC_Init,
+ USBD_CDC_DeInit,
+ USBD_CDC_Setup,
+ NULL, /* EP0_TxSent, */
+ USBD_CDC_EP0_RxReady,
+ USBD_CDC_DataIn,
+ USBD_CDC_DataOut,
+ NULL,
+ NULL,
+ NULL,
+ USBD_CDC_GetHSCfgDesc,
+ USBD_CDC_GetFSCfgDesc,
+ USBD_CDC_GetOtherSpeedCfgDesc,
+ USBD_CDC_GetDeviceQualifierDescriptor,
+};
+
+/* USB CDC device Configuration Descriptor */
+__ALIGN_BEGIN uint8_t USBD_CDC_CfgHSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ /*Configuration Descriptor*/
+ 0x09, /* bLength: Configuration Descriptor size */
+ USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
+ USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
+ 0x00,
+ 0x02, /* bNumInterfaces: 2 interface */
+ 0x01, /* bConfigurationValue: Configuration value */
+ 0x00, /* iConfiguration: Index of string descriptor describing the configuration */
+ 0xC0, /* bmAttributes: self powered */
+ 0x32, /* MaxPower 0 mA */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoints used */
+ 0x02, /* bInterfaceClass: Communication Interface Class */
+ 0x02, /* bInterfaceSubClass: Abstract Control Model */
+ 0x01, /* bInterfaceProtocol: Common AT commands */
+ 0x00, /* iInterface: */
+
+ /*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x00, /* bDescriptorSubtype: Header Func Desc */
+ 0x10, /* bcdCDC: spec release number */
+ 0x01,
+
+ /*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x01, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x00, /* bmCapabilities: D0+D1 */
+ 0x01, /* bDataInterface: 1 */
+
+ /*ACM Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x02, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities */
+
+ /*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x06, /* bDescriptorSubtype: Union func desc */
+ 0x00, /* bMasterInterface: Communication class interface */
+ 0x01, /* bSlaveInterface0: Data Class Interface */
+
+ /*Endpoint 2 Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_CMD_EP, /* bEndpointAddress */
+ 0x03, /* bmAttributes: Interrupt */
+ LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_CMD_PACKET_SIZE),
+ 0x10, /* bInterval: */
+ /*---------------------------------------------------------------------------*/
+
+ /*Data class interface descriptor*/
+ 0x09, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
+ 0x01, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: Two endpoints used */
+ 0x0A, /* bInterfaceClass: CDC */
+ 0x00, /* bInterfaceSubClass: */
+ 0x00, /* bInterfaceProtocol: */
+ 0x00, /* iInterface: */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE),
+ 0x00, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE),
+ 0x00 /* bInterval: ignore for Bulk transfer */
+} ;
+
+
+/* USB CDC device Configuration Descriptor */
+__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ /*Configuration Descriptor*/
+ 0x09, /* bLength: Configuration Descriptor size */
+ USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
+ USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
+ 0x00,
+ 0x02, /* bNumInterfaces: 2 interface */
+ 0x01, /* bConfigurationValue: Configuration value */
+ 0x00, /* iConfiguration: Index of string descriptor describing the configuration */
+ 0xC0, /* bmAttributes: self powered */
+ 0x32, /* MaxPower 0 mA */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoints used */
+ 0x02, /* bInterfaceClass: Communication Interface Class */
+ 0x02, /* bInterfaceSubClass: Abstract Control Model */
+ 0x01, /* bInterfaceProtocol: Common AT commands */
+ 0x00, /* iInterface: */
+
+ /*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x00, /* bDescriptorSubtype: Header Func Desc */
+ 0x10, /* bcdCDC: spec release number */
+ 0x01,
+
+ /*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x01, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x00, /* bmCapabilities: D0+D1 */
+ 0x01, /* bDataInterface: 1 */
+
+ /*ACM Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x02, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities */
+
+ /*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x06, /* bDescriptorSubtype: Union func desc */
+ 0x00, /* bMasterInterface: Communication class interface */
+ 0x01, /* bSlaveInterface0: Data Class Interface */
+
+ /*Endpoint 2 Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_CMD_EP, /* bEndpointAddress */
+ 0x03, /* bmAttributes: Interrupt */
+ LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_CMD_PACKET_SIZE),
+ 0x10, /* bInterval: */
+ /*---------------------------------------------------------------------------*/
+
+ /*Data class interface descriptor*/
+ 0x09, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
+ 0x01, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: Two endpoints used */
+ 0x0A, /* bInterfaceClass: CDC */
+ 0x00, /* bInterfaceSubClass: */
+ 0x00, /* bInterfaceProtocol: */
+ 0x00, /* iInterface: */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
+ 0x00, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
+ 0x00 /* bInterval: ignore for Bulk transfer */
+} ;
+
+__ALIGN_BEGIN uint8_t USBD_CDC_OtherSpeedCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ 0x09, /* bLength: Configuation Descriptor size */
+ USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION,
+ USB_CDC_CONFIG_DESC_SIZ,
+ 0x00,
+ 0x02, /* bNumInterfaces: 2 interfaces */
+ 0x01, /* bConfigurationValue: */
+ 0x04, /* iConfiguration: */
+ 0xC0, /* bmAttributes: */
+ 0x32, /* MaxPower 100 mA */
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoints used */
+ 0x02, /* bInterfaceClass: Communication Interface Class */
+ 0x02, /* bInterfaceSubClass: Abstract Control Model */
+ 0x01, /* bInterfaceProtocol: Common AT commands */
+ 0x00, /* iInterface: */
+
+ /*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x00, /* bDescriptorSubtype: Header Func Desc */
+ 0x10, /* bcdCDC: spec release number */
+ 0x01,
+
+ /*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x01, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x00, /* bmCapabilities: D0+D1 */
+ 0x01, /* bDataInterface: 1 */
+
+ /*ACM Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x02, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities */
+
+ /*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x06, /* bDescriptorSubtype: Union func desc */
+ 0x00, /* bMasterInterface: Communication class interface */
+ 0x01, /* bSlaveInterface0: Data Class Interface */
+
+ /*Endpoint 2 Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT , /* bDescriptorType: Endpoint */
+ CDC_CMD_EP, /* bEndpointAddress */
+ 0x03, /* bmAttributes: Interrupt */
+ LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_CMD_PACKET_SIZE),
+ 0xFF, /* bInterval: */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Data class interface descriptor*/
+ 0x09, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
+ 0x01, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: Two endpoints used */
+ 0x0A, /* bInterfaceClass: CDC */
+ 0x00, /* bInterfaceSubClass: */
+ 0x00, /* bInterfaceProtocol: */
+ 0x00, /* iInterface: */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ 0x40, /* wMaxPacketSize: */
+ 0x00,
+ 0x00, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ 0x40, /* wMaxPacketSize: */
+ 0x00,
+ 0x00 /* bInterval */
+};
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief USBD_CDC_Init
+ * Initialize the CDC interface
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ uint8_t ret = 0;
+ USBD_CDC_HandleTypeDef *hcdc;
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ /* Open EP IN */
+ USBD_LL_OpenEP(pdev,
+ CDC_IN_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_HS_IN_PACKET_SIZE);
+
+ /* Open EP OUT */
+ USBD_LL_OpenEP(pdev,
+ CDC_OUT_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_HS_OUT_PACKET_SIZE);
+
+ }
+ else
+ {
+ /* Open EP IN */
+ USBD_LL_OpenEP(pdev,
+ CDC_IN_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_FS_IN_PACKET_SIZE);
+
+ /* Open EP OUT */
+ USBD_LL_OpenEP(pdev,
+ CDC_OUT_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_FS_OUT_PACKET_SIZE);
+ }
+ /* Open Command IN EP */
+ USBD_LL_OpenEP(pdev,
+ CDC_CMD_EP,
+ USBD_EP_TYPE_INTR,
+ CDC_CMD_PACKET_SIZE);
+
+
+ pdev->pClassData = USBD_malloc(sizeof (USBD_CDC_HandleTypeDef));
+
+ if(pdev->pClassData == NULL)
+ {
+ ret = 1;
+ }
+ else
+ {
+ hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ /* Init physical Interface components */
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init();
+
+ /* Init Xfer states */
+ hcdc->TxState =0;
+ hcdc->RxState =0;
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_HS_OUT_PACKET_SIZE);
+ }
+ else
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_FS_OUT_PACKET_SIZE);
+ }
+
+
+ }
+ return ret;
+}
+
+/**
+ * @brief USBD_CDC_Init
+ * DeInitialize the CDC layer
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ uint8_t ret = 0;
+
+ /* Open EP IN */
+ USBD_LL_CloseEP(pdev,
+ CDC_IN_EP);
+
+ /* Open EP OUT */
+ USBD_LL_CloseEP(pdev,
+ CDC_OUT_EP);
+
+ /* Open Command IN EP */
+ USBD_LL_CloseEP(pdev,
+ CDC_CMD_EP);
+
+
+ /* DeInit physical Interface components */
+ if(pdev->pClassData != NULL)
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit();
+ USBD_free(pdev->pClassData);
+ pdev->pClassData = NULL;
+ }
+
+ return ret;
+}
+
+/**
+ * @brief USBD_CDC_Setup
+ * Handle the CDC specific requests
+ * @param pdev: instance
+ * @param req: usb requests
+ * @retval status
+ */
+static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+ static uint8_t ifalt = 0;
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_CLASS :
+ if (req->wLength)
+ {
+ if (req->bmRequest & 0x80)
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
+ (uint8_t *)hcdc->data,
+ req->wLength);
+ USBD_CtlSendData (pdev,
+ (uint8_t *)hcdc->data,
+ req->wLength);
+ }
+ else
+ {
+ hcdc->CmdOpCode = req->bRequest;
+ hcdc->CmdLength = req->wLength;
+
+ USBD_CtlPrepareRx (pdev,
+ (uint8_t *)hcdc->data,
+ req->wLength);
+ }
+
+ }
+ else
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
+ (uint8_t*)req,
+ 0);
+ }
+ break;
+
+ case USB_REQ_TYPE_STANDARD:
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_INTERFACE :
+ USBD_CtlSendData (pdev,
+ &ifalt,
+ 1);
+ break;
+
+ case USB_REQ_SET_INTERFACE :
+ break;
+ }
+
+ default:
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_CDC_DataIn
+ * Data sent on non-control IN endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ if(pdev->pClassData != NULL)
+ {
+
+ hcdc->TxState = 0;
+
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+
+/**
+ * @brief USBD_CDC_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ /* Get the received data length */
+ hcdc->RxLength = USBD_LL_GetRxDataSize (pdev, epnum);
+
+ /* USB data will be immediately processed, this allow next USB traffic being
+ NAKed till the end of the application Xfer */
+ if(pdev->pClassData != NULL)
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength);
+
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+
+
+
+/**
+ * @brief USBD_CDC_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ if((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFF))
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode,
+ (uint8_t *)hcdc->data,
+ hcdc->CmdLength);
+ hcdc->CmdOpCode = 0xFF;
+
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_CDC_GetFSCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_CfgFSDesc);
+ return USBD_CDC_CfgFSDesc;
+}
+
+/**
+ * @brief USBD_CDC_GetHSCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_CfgHSDesc);
+ return USBD_CDC_CfgHSDesc;
+}
+
+/**
+ * @brief USBD_CDC_GetCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_OtherSpeedCfgDesc);
+ return USBD_CDC_OtherSpeedCfgDesc;
+}
+
+/**
+* @brief DeviceQualifierDescriptor
+* return Device Qualifier descriptor
+* @param length : pointer data length
+* @retval pointer to descriptor buffer
+*/
+uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_DeviceQualifierDesc);
+ return USBD_CDC_DeviceQualifierDesc;
+}
+
+/**
+* @brief USBD_CDC_RegisterInterface
+ * @param pdev: device instance
+ * @param fops: CD Interface callback
+ * @retval status
+ */
+uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev,
+ USBD_CDC_ItfTypeDef *fops)
+{
+ uint8_t ret = USBD_FAIL;
+
+ if(fops != NULL)
+ {
+ pdev->pUserData= fops;
+ ret = USBD_OK;
+ }
+
+ return ret;
+}
+
+/**
+ * @brief USBD_CDC_SetTxBuffer
+ * @param pdev: device instance
+ * @param pbuff: Tx Buffer
+ * @retval status
+ */
+uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff,
+ uint16_t length)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ hcdc->TxBuffer = pbuff;
+ hcdc->TxLength = length;
+
+ return USBD_OK;
+}
+
+
+/**
+ * @brief USBD_CDC_SetRxBuffer
+ * @param pdev: device instance
+ * @param pbuff: Rx Buffer
+ * @retval status
+ */
+uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ hcdc->RxBuffer = pbuff;
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_CDC_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ if(pdev->pClassData != NULL)
+ {
+ if(hcdc->TxState == 0)
+ {
+ /* Tx Transfer in progress */
+ hcdc->TxState = 1;
+
+ /* Transmit next packet */
+ USBD_LL_Transmit(pdev,
+ CDC_IN_EP,
+ hcdc->TxBuffer,
+ hcdc->TxLength);
+
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_BUSY;
+ }
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+
+
+/**
+ * @brief USBD_CDC_ReceivePacket
+ * prepare OUT Endpoint for reception
+ * @param pdev: device instance
+ * @retval status
+ */
+
+uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ /* Suspend or Resume USB Out process */
+ if(pdev->pClassData != NULL)
+ {
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_HS_OUT_PACKET_SIZE);
+ }
+ else
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_FS_OUT_PACKET_SIZE);
+ }
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Src/usbd_cdc_if.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Src/usbd_cdc_if.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,306 @@
+/**
+ ******************************************************************************
+ * @file : usbd_cdc_if.c
+ * @brief :
+ ******************************************************************************
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc_if.h"
+/* USER CODE BEGIN INCLUDE */
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CDC
+ * @brief usbd core module
+ * @{
+ */
+
+/** @defgroup USBD_CDC_Private_TypesDefinitions
+ * @{
+ */
+/* USER CODE BEGIN PRIVATE_TYPES */
+/* USER CODE END PRIVATE_TYPES */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Defines
+ * @{
+ */
+/* USER CODE BEGIN PRIVATE_DEFINES */
+/* Define size for the receive and transmit buffer over CDC */
+/* It's up to user to redefine and/or remove those define */
+#define APP_RX_DATA_SIZE 8200
+#define APP_TX_DATA_SIZE 8200
+/* USER CODE END PRIVATE_DEFINES */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Macros
+ * @{
+ */
+/* USER CODE BEGIN PRIVATE_MACRO */
+/* USER CODE END PRIVATE_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Variables
+ * @{
+ */
+/* Create buffer for reception and transmission */
+/* It's up to user to redefine and/or remove those define */
+/* Received Data over USB are stored in this buffer */
+uint8_t UserRxBufferFS[APP_RX_DATA_SIZE];
+
+/* Send Data over USB CDC are stored in this buffer */
+uint8_t UserTxBufferFS[APP_TX_DATA_SIZE];
+
+/* USER CODE BEGIN PRIVATE_VARIABLES */
+/* USER CODE END PRIVATE_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_IF_Exported_Variables
+ * @{
+ */
+ extern USBD_HandleTypeDef hUsbDeviceFS;
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_FunctionPrototypes
+ * @{
+ */
+static int8_t CDC_Init_FS (void);
+static int8_t CDC_DeInit_FS (void);
+static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length);
+static int8_t CDC_Receive_FS (uint8_t* pbuf, uint32_t *Len);
+
+/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
+/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
+
+/**
+ * @}
+ */
+
+USBD_CDC_ItfTypeDef USBD_Interface_fops_FS =
+{
+ CDC_Init_FS,
+ CDC_DeInit_FS,
+ CDC_Control_FS,
+ CDC_Receive_FS
+};
+
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @brief CDC_Init_FS
+ * Initializes the CDC media low layer over the FS USB IP
+ * @param None
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t CDC_Init_FS(void)
+{
+ /* USER CODE BEGIN 3 */
+ /* Set Application Buffers */
+ USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0);
+ USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS);
+ return (USBD_OK);
+ /* USER CODE END 3 */
+}
+
+/**
+ * @brief CDC_DeInit_FS
+ * DeInitializes the CDC media low layer
+ * @param None
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t CDC_DeInit_FS(void)
+{
+ /* USER CODE BEGIN 4 */
+ return (USBD_OK);
+ /* USER CODE END 4 */
+}
+
+/**
+ * @brief CDC_Control_FS
+ * Manage the CDC class requests
+ * @param cmd: Command code
+ * @param pbuf: Buffer containing command data (request parameters)
+ * @param length: Number of data to be sent (in bytes)
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length)
+{
+ /* USER CODE BEGIN 5 */
+ switch (cmd)
+ {
+ case CDC_SEND_ENCAPSULATED_COMMAND:
+
+ break;
+
+ case CDC_GET_ENCAPSULATED_RESPONSE:
+
+ break;
+
+ case CDC_SET_COMM_FEATURE:
+
+ break;
+
+ case CDC_GET_COMM_FEATURE:
+
+ break;
+
+ case CDC_CLEAR_COMM_FEATURE:
+
+ break;
+
+ /*******************************************************************************/
+ /* Line Coding Structure */
+ /*-----------------------------------------------------------------------------*/
+ /* Offset | Field | Size | Value | Description */
+ /* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/
+ /* 4 | bCharFormat | 1 | Number | Stop bits */
+ /* 0 - 1 Stop bit */
+ /* 1 - 1.5 Stop bits */
+ /* 2 - 2 Stop bits */
+ /* 5 | bParityType | 1 | Number | Parity */
+ /* 0 - None */
+ /* 1 - Odd */
+ /* 2 - Even */
+ /* 3 - Mark */
+ /* 4 - Space */
+ /* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */
+ /*******************************************************************************/
+ case CDC_SET_LINE_CODING:
+
+ break;
+
+ case CDC_GET_LINE_CODING:
+
+ break;
+
+ case CDC_SET_CONTROL_LINE_STATE:
+
+ break;
+
+ case CDC_SEND_BREAK:
+
+ break;
+
+ default:
+ break;
+ }
+
+ return (USBD_OK);
+ /* USER CODE END 5 */
+}
+
+/**
+ * @brief CDC_Receive_FS
+ * Data received over USB OUT endpoint are sent over CDC interface
+ * through this function.
+ *
+ * @note
+ * This function will block any OUT packet reception on USB endpoint
+ * untill exiting this function. If you exit this function before transfer
+ * is complete on CDC interface (ie. using DMA controller) it will result
+ * in receiving more data while previous ones are still not sent.
+ *
+ * @param Buf: Buffer of data to be received
+ * @param Len: Number of data received (in bytes)
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t CDC_Receive_FS (uint8_t* Buf, uint32_t *Len)
+{
+ /* USER CODE BEGIN 6 */
+ USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]);
+ USBD_CDC_ReceivePacket(&hUsbDeviceFS);
+ return (USBD_OK);
+ /* USER CODE END 6 */
+}
+
+/**
+ * @brief CDC_Transmit_FS
+ * Data send over USB IN endpoint are sent over CDC interface
+ * through this function.
+ * @note
+ *
+ *
+ * @param Buf: Buffer of data to be send
+ * @param Len: Number of data to be send (in bytes)
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY
+ */
+uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len)
+{
+ uint8_t result = USBD_OK;
+ /* USER CODE BEGIN 7 */
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData;
+ if (hcdc->TxState != 0){
+ return USBD_BUSY;
+ }
+ USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len);
+ result = USBD_CDC_TransmitPacket(&hUsbDeviceFS);
+ /* USER CODE END 7 */
+ return result;
+}
+
+ int8_t CDC_Receive_FSP(uint8_t* Buf, uint32_t *Len)
+{
+ /* USER CODE BEGIN 6 */
+ USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]);
+ USBD_CDC_ReceivePacket(&hUsbDeviceFS);
+ return (USBD_OK);
+ /* USER CODE END 6 */
+}
+/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
+/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Src/usbd_conf.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Src/usbd_conf.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,569 @@
+ /**
+ ******************************************************************************
+ * @file : usbd_conf.c
+ * @version : v1.0_Cube
+ * @brief : This file implements the board support package for the USB device library
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+#include "stm32f4xx_hal.h"
+#include "usbd_def.h"
+#include "usbd_core.h"
+#include "mbed.h"
+
+PCD_HandleTypeDef hpcd_USB_OTG_FS;
+void Error_Handler(void);
+
+/* External functions --------------------------------------------------------*/
+void SystemClock_Config(void);
+
+/* USER CODE BEGIN 0 */
+/* USER CODE END 0 */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* USER CODE BEGIN 1 */
+/* USER CODE END 1 */
+
+/*******************************************************************************
+ LL Driver Callbacks (PCD -> USB Device Library)
+*******************************************************************************/
+/* MSP Init */
+
+#include "CmdUSB.h"
+
+void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+ if(pcdHandle->Instance==USB_OTG_FS)
+ {
+ /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
+
+ /* USER CODE END USB_OTG_FS_MspInit 0 */
+
+ /**USB_OTG_FS GPIO Configuration
+ PA11 ------> USB_OTG_FS_DM
+ PA12 ------> USB_OTG_FS_DP
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* Peripheral clock enable */
+ __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+
+ /* Peripheral interrupt init */
+ HAL_NVIC_SetPriority(OTG_FS_IRQn, 0, 0);
+ HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
+ /* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
+
+ /* USER CODE END USB_OTG_FS_MspInit 1 */
+ }
+}
+
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
+{
+ if(pcdHandle->Instance==USB_OTG_FS)
+ {
+ /* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
+
+ /* USER CODE END USB_OTG_FS_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
+
+ /**USB_OTG_FS GPIO Configuration
+ PA11 ------> USB_OTG_FS_DM
+ PA12 ------> USB_OTG_FS_DP
+ */
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
+
+ /* Peripheral interrupt Deinit*/
+ HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
+
+ /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
+
+ /* USER CODE END USB_OTG_FS_MspDeInit 1 */
+ }
+}
+
+/**
+ * @brief Setup stage callback
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SetupStage((USBD_HandleTypeDef *)hpcd->pData, (uint8_t *)hpcd->Setup);
+}
+
+/**
+ * @brief Data Out stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint Number
+ * @retval None
+ */
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ int i;
+ int size = 0;
+ static int count = 0;
+ static int firsttime = 1;
+
+ __disable_irq(); // Disable Interrupts
+ if (epnum == 1)
+ {
+ for (i = 0; i < 64; i++) //64 transfer length hardcode but faster in it
+ {
+ CmdManager.BufFromHost[i+64*count] = CmdManager.BufFromHostChunk[i];
+ }
+ size = (CmdManager.BufFromHost[1]<<8) + CmdManager.BufFromHost[2] + CMD_HEADER_RX_SIZE;
+ if ((firsttime==1) && (CmdManager.CheckCmd(CmdManager.BufFromHost[0]) == true))
+ {
+ firsttime = 0;
+ if (size > 64)
+ {
+ CmdManager.count = ((size-1)>>6) + 1;
+ }
+ }
+ count++;
+ CmdManager.count--;
+ if (CmdManager.count == 0)
+ {
+ count = 0;
+ firsttime=1;
+ }
+ }
+ USBD_LL_DataOutStage((USBD_HandleTypeDef *)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
+ __enable_irq(); // Disable Interrupts
+}
+
+/**
+ * @brief Data In stage callback..
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint Number
+ * @retval None
+ */
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_DataInStage((USBD_HandleTypeDef *)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
+}
+
+/**
+ * @brief SOF callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SOF((USBD_HandleTypeDef *)hpcd->pData);
+}
+
+/**
+ * @brief Reset callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
+
+ /*Set USB Current Speed*/
+ switch (hpcd->Init.speed)
+ {
+ case PCD_SPEED_HIGH:
+ speed = USBD_SPEED_HIGH;
+ break;
+ case PCD_SPEED_FULL:
+ speed = USBD_SPEED_FULL;
+ break;
+
+ default:
+ speed = USBD_SPEED_FULL;
+ break;
+ }
+ USBD_LL_SetSpeed((USBD_HandleTypeDef *)hpcd->pData, speed);
+
+ /*Reset Device*/
+ USBD_LL_Reset((USBD_HandleTypeDef *)hpcd->pData);
+}
+
+/**
+ * @brief Suspend callback.
+ * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Inform USB library that core enters in suspend Mode */
+ USBD_LL_Suspend((USBD_HandleTypeDef *)hpcd->pData);
+ __HAL_PCD_GATE_PHYCLOCK(hpcd);
+ /*Enter in STOP mode */
+ /* USER CODE BEGIN 2 */
+ if (hpcd->Init.low_power_enable)
+ {
+ /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */
+ SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+ }
+ /* USER CODE END 2 */
+}
+
+/**
+ * @brief Resume callback.
+ When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* USER CODE BEGIN 3 */
+ /* USER CODE END 3 */
+ USBD_LL_Resume((USBD_HandleTypeDef *)hpcd->pData);
+}
+
+/**
+ * @brief ISOC Out Incomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint Number
+ * @retval None
+ */
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef *)hpcd->pData, epnum);
+}
+
+/**
+ * @brief ISOC In Incomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint Number
+ * @retval None
+ */
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoINIncomplete((USBD_HandleTypeDef *)hpcd->pData, epnum);
+}
+
+/**
+ * @brief Connect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevConnected((USBD_HandleTypeDef *)hpcd->pData);
+}
+
+/**
+ * @brief Disconnect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevDisconnected((USBD_HandleTypeDef *)hpcd->pData);
+}
+
+/*******************************************************************************
+ LL Driver Interface (USB Device Library --> PCD)
+*******************************************************************************/
+/**
+ * @brief Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev)
+{
+ /* Init USB_IP */
+ if (pdev->id == DEVICE_FS) {
+ /* Link The driver to the stack */
+ hpcd_USB_OTG_FS.pData = pdev;
+ pdev->pData = &hpcd_USB_OTG_FS;
+
+ hpcd_USB_OTG_FS.Instance = USB_OTG_FS;
+ hpcd_USB_OTG_FS.Init.dev_endpoints = 4;
+ hpcd_USB_OTG_FS.Init.speed = PCD_SPEED_FULL;
+ hpcd_USB_OTG_FS.Init.dma_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.ep0_mps = DEP0CTL_MPS_64;
+ hpcd_USB_OTG_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
+ hpcd_USB_OTG_FS.Init.Sof_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.low_power_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.lpm_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.vbus_sensing_enable = DISABLE;
+ hpcd_USB_OTG_FS.Init.use_dedicated_ep1 = DISABLE;
+ if (HAL_PCD_Init(&hpcd_USB_OTG_FS) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ HAL_PCDEx_SetRxFiFo(&hpcd_USB_OTG_FS, 0x80);
+ HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 0, 0x40);
+ HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 1, 0x80);
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief De-Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev)
+{
+ HAL_PCD_DeInit((PCD_HandleTypeDef *)pdev->pData);
+ return USBD_OK;
+}
+
+/**
+ * @brief Starts the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
+{
+ HAL_PCD_Start((PCD_HandleTypeDef *)pdev->pData);
+ return USBD_OK;
+}
+
+/**
+ * @brief Stops the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev)
+{
+ HAL_PCD_Stop((PCD_HandleTypeDef *)pdev->pData);
+ return USBD_OK;
+}
+
+/**
+ * @brief Opens an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param ep_type: Endpoint Type
+ * @param ep_mps: Endpoint Max Packet Size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps)
+{
+
+ HAL_PCD_EP_Open((PCD_HandleTypeDef *)pdev->pData,
+ ep_addr,
+ ep_mps,
+ ep_type);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief Closes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+
+ HAL_PCD_EP_Close((PCD_HandleTypeDef *)pdev->pData, ep_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Flushes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+
+ HAL_PCD_EP_Flush((PCD_HandleTypeDef *)pdev->pData, ep_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+
+ HAL_PCD_EP_SetStall((PCD_HandleTypeDef *)pdev->pData, ep_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+
+ HAL_PCD_EP_ClrStall((PCD_HandleTypeDef *)pdev->pData, ep_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns Stall condition.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Stall (1: Yes, 0: No)
+ */
+uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef *)pdev->pData;
+
+ if((ep_addr & 0x80) == 0x80)
+ {
+ return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
+ }
+ else
+ {
+ return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
+ }
+}
+/**
+ * @brief Assigns a USB address to the device.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr)
+{
+
+ HAL_PCD_SetAddress((PCD_HandleTypeDef *)pdev->pData, dev_addr);
+ return USBD_OK;
+}
+
+/**
+ * @brief Transmits data over an endpoint.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be sent
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size)
+{
+
+ HAL_PCD_EP_Transmit((PCD_HandleTypeDef *)pdev->pData, ep_addr, pbuf, size);
+ return USBD_OK;
+}
+
+/**
+ * @brief Prepares an endpoint for reception.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be received
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size)
+{
+
+ HAL_PCD_EP_Receive((PCD_HandleTypeDef *)pdev->pData, ep_addr, pbuf, size);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns the last transfered packet size.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Recived Data Size
+ */
+uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef *)pdev->pData, ep_addr);
+ //return ((pdev.pData.OUT_ep[ep_addr & 0x7F].xfer_count));
+}
+
+#if (USBD_LPM_ENABLED == 1)
+/**
+ * @brief HAL_PCDEx_LPM_Callback : Send LPM message to user layer
+ * @param hpcd: PCD handle
+ * @param msg: LPM message
+ * @retval HAL status
+ */
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+ switch ( msg)
+ {
+ case PCD_LPM_L0_ACTIVE:
+ if (hpcd->Init.low_power_enable)
+ {
+ SystemClock_Config();
+
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+ }
+ __HAL_PCD_UNGATE_PHYCLOCK(hpcd);
+ USBD_LL_Resume(hpcd->pData);
+ break;
+
+ case PCD_LPM_L1_ACTIVE:
+ __HAL_PCD_GATE_PHYCLOCK(hpcd);
+ USBD_LL_Suspend(hpcd->pData);
+
+ /*Enter in STOP mode */
+ if (hpcd->Init.low_power_enable)
+ {
+ /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */
+ SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+ }
+ break;
+ }
+}
+#endif
+/**
+ * @brief Delays routine for the USB Device Library.
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void USBD_LL_Delay (uint32_t Delay)
+{
+ HAL_Delay(Delay);
+}
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Src/usbd_core.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Src/usbd_core.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,565 @@
+/**
+ ******************************************************************************
+ * @file usbd_core.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides all the USBD core functions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+* @{
+*/
+
+
+/** @defgroup USBD_CORE
+* @brief usbd core module
+* @{
+*/
+
+/** @defgroup USBD_CORE_Private_TypesDefinitions
+* @{
+*/
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Defines
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Macros
+* @{
+*/
+/**
+* @}
+*/
+
+
+
+
+/** @defgroup USBD_CORE_Private_FunctionPrototypes
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Variables
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Functions
+* @{
+*/
+
+/**
+* @brief USBD_Init
+* Initializes the device stack and load the class driver
+* @param pdev: device instance
+* @param pdesc: Descriptor structure address
+* @param id: Low level core index
+* @retval None
+*/
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
+{
+ /* Check whether the USB Host handle is valid */
+ if(pdev == NULL)
+ {
+ USBD_ErrLog("Invalid Device handle");
+ return USBD_FAIL;
+ }
+
+ /* Unlink previous class*/
+ if(pdev->pClass != NULL)
+ {
+ pdev->pClass = NULL;
+ }
+
+ /* Assign USBD Descriptors */
+ if(pdesc != NULL)
+ {
+ pdev->pDesc = pdesc;
+ }
+
+ /* Set Device initial State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->id = id;
+ /* Initialize low level driver */
+ USBD_LL_Init(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DeInit
+* Re-Initialize th device library
+* @param pdev: device instance
+* @retval status: status
+*/
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
+{
+ /* Set Default State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ /* Initialize low level driver */
+ USBD_LL_DeInit(pdev);
+
+ return USBD_OK;
+}
+
+
+/**
+ * @brief USBD_RegisterClass
+ * Link class driver to Device Core.
+ * @param pDevice : Device Handle
+ * @param pclass: Class handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
+{
+ USBD_StatusTypeDef status = USBD_OK;
+ if(pclass != 0)
+ {
+ /* link the class to the USB Device handle */
+ pdev->pClass = pclass;
+ status = USBD_OK;
+ }
+ else
+ {
+ USBD_ErrLog("Invalid Class handle");
+ status = USBD_FAIL;
+ }
+
+ return status;
+}
+
+/**
+ * @brief USBD_Start
+ * Start the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
+{
+
+ /* Start the low level driver */
+ USBD_LL_Start(pdev);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Stop
+ * Stop the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_RunTestMode
+* Launch test mode process
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetClassConfig
+* Configure device and start the interface
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ USBD_StatusTypeDef ret = USBD_FAIL;
+
+ if(pdev->pClass != NULL)
+ {
+ /* Set configuration and Start the Class*/
+ if(pdev->pClass->Init(pdev, cfgidx) == 0)
+ {
+ ret = USBD_OK;
+ }
+ }
+ return ret;
+}
+
+/**
+* @brief USBD_ClrClassConfig
+* Clear current configuration
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status: USBD_StatusTypeDef
+*/
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ /* Clear configuration and De-initialize the Class process*/
+ pdev->pClass->DeInit(pdev, cfgidx);
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetupStage
+* Handle the setup stage
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
+{
+
+ USBD_ParseSetupRequest(&pdev->request, psetup);
+
+ pdev->ep0_state = USBD_EP0_SETUP;
+ pdev->ep0_data_len = pdev->request.wLength;
+
+ switch (pdev->request.bmRequest & 0x1F)
+ {
+ case USB_REQ_RECIPIENT_DEVICE:
+ USBD_StdDevReq (pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_INTERFACE:
+ USBD_StdItfReq(pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ USBD_StdEPReq(pdev, &pdev->request);
+ break;
+
+ default:
+ USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataOutStage
+* Handle data OUT stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_out[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueRx (pdev,
+ pdata,
+ MIN(pep->rem_length ,pep->maxpacket));
+ }
+ else
+ {
+ if((pdev->pClass->EP0_RxReady != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_RxReady(pdev);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ }
+ else if((pdev->pClass->DataOut != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataOut(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataInStage
+* Handle data in stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_in[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_IN)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueSendData (pdev,
+ pdata,
+ pep->rem_length);
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ NULL,
+ 0);
+ }
+ else
+ { /* last packet is MPS multiple, so send ZLP packet */
+ if((pep->total_length % pep->maxpacket == 0) &&
+ (pep->total_length >= pep->maxpacket) &&
+ (pep->total_length < pdev->ep0_data_len ))
+ {
+
+ USBD_CtlContinueSendData(pdev , NULL, 0);
+ pdev->ep0_data_len = 0;
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ NULL,
+ 0);
+ }
+ else
+ {
+ if((pdev->pClass->EP0_TxSent != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_TxSent(pdev);
+ }
+ USBD_CtlReceiveStatus(pdev);
+ }
+ }
+ }
+ if (pdev->dev_test_mode == 1)
+ {
+ USBD_RunTestMode(pdev);
+ pdev->dev_test_mode = 0;
+ }
+ }
+ else if((pdev->pClass->DataIn != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataIn(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
+{
+ /* Open EP0 OUT */
+ USBD_LL_OpenEP(pdev,
+ 0x00,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
+
+ /* Open EP0 IN */
+ USBD_LL_OpenEP(pdev,
+ 0x80,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
+ /* Upon Reset call user call back */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ if (pdev->pClassData)
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+
+ return USBD_OK;
+}
+
+
+
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
+{
+ pdev->dev_speed = speed;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Suspend
+* Handle Suspend event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_old_state = pdev->dev_state;
+ pdev->dev_state = USBD_STATE_SUSPENDED;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Resume
+* Handle Resume event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_state = pdev->dev_old_state;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_SOF
+* Handle SOF event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
+{
+ if(pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ if(pdev->pClass->SOF != NULL)
+ {
+ pdev->pClass->SOF(pdev);
+ }
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoINIncomplete
+* Handle iso in incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoOUTIncomplete
+* Handle iso out incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevConnected
+* Handle device connection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevDisconnected
+* Handle device disconnection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ return USBD_OK;
+}
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Src/usbd_ctlreq.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Src/usbd_ctlreq.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,782 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the standard USB requests following chapter 9.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ctlreq.h"
+#include "usbd_ioreq.h"
+
+
+/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_REQ
+ * @brief USB standard requests module
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_FunctionPrototypes
+ * @{
+ */
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_GetLen(uint8_t *buf);
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Functions
+ * @{
+ */
+
+
+/**
+* @brief USBD_StdDevReq
+* Handle standard usb device requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ USBD_GetDescriptor (pdev, req) ;
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ USBD_SetAddress(pdev, req);
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ USBD_SetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_CONFIGURATION:
+ USBD_GetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_STATUS:
+ USBD_GetStatus (pdev , req);
+ break;
+
+
+ case USB_REQ_SET_FEATURE:
+ USBD_SetFeature (pdev , req);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ USBD_ClrFeature (pdev , req);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+
+ return ret;
+}
+
+/**
+* @brief USBD_StdItfReq
+* Handle standard usb interface requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_CONFIGURED:
+
+ if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
+ {
+ pdev->pClass->Setup (pdev, req);
+
+ if((req->wLength == 0)&& (ret == USBD_OK))
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_StdEPReq
+* Handle standard usb endpoint requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+
+ uint8_t ep_addr;
+ USBD_StatusTypeDef ret = USBD_OK;
+ USBD_EndpointTypeDef *pep;
+ ep_addr = LOBYTE(req->wIndex);
+
+ /* Check if it is a class request */
+ if ((req->bmRequest & 0x60) == 0x20)
+ {
+ pdev->pClass->Setup (pdev, req);
+
+ return USBD_OK;
+ }
+
+ switch (req->bRequest)
+ {
+
+ case USB_REQ_SET_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+
+ }
+ }
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_CLEAR_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_ClearStallEP(pdev , ep_addr);
+ pdev->pClass->Setup (pdev, req);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_GET_STATUS:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\
+ &pdev->ep_out[ep_addr & 0x7F];
+ if(USBD_LL_IsStallEP(pdev, ep_addr))
+ {
+ pep->status = 0x0001;
+ }
+ else
+ {
+ pep->status = 0x0000;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pep->status,
+ 2);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+ return ret;
+}
+/**
+* @brief USBD_GetDescriptor
+* Handle Get Descriptor requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint16_t len;
+ uint8_t *pbuf;
+
+
+ switch (req->wValue >> 8)
+ {
+#if (USBD_LPM_ENABLED == 1)
+ case USB_DESC_TYPE_BOS:
+ pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len);
+ break;
+#endif
+ case USB_DESC_TYPE_DEVICE:
+ pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USB_DESC_TYPE_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ else
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ break;
+
+ case USB_DESC_TYPE_STRING:
+ switch ((uint8_t)(req->wValue))
+ {
+ case USBD_IDX_LANGID_STR:
+ pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_MFC_STR:
+ pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_PRODUCT_STR:
+ pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_SERIAL_STR:
+ pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_CONFIG_STR:
+ pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_INTERFACE_STR:
+ pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ default:
+#if (USBD_SUPPORT_USER_STRING == 1)
+ pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue) , &len);
+ break;
+#else
+ USBD_CtlError(pdev , req);
+ return;
+#endif
+ }
+ break;
+ case USB_DESC_TYPE_DEVICE_QUALIFIER:
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(&len);
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ default:
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ if((len != 0)&& (req->wLength != 0))
+ {
+
+ len = MIN(len , req->wLength);
+
+ USBD_CtlSendData (pdev,
+ pbuf,
+ len);
+ }
+
+}
+
+/**
+* @brief USBD_SetAddress
+* Set device address
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint8_t dev_addr;
+
+ if ((req->wIndex == 0) && (req->wLength == 0))
+ {
+ dev_addr = (uint8_t)(req->wValue) & 0x7F;
+
+ if (pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ pdev->dev_address = dev_addr;
+ USBD_LL_SetUSBAddress(pdev, dev_addr);
+ USBD_CtlSendStatus(pdev);
+
+ if (dev_addr != 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ }
+ else
+ {
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ }
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+}
+
+/**
+* @brief USBD_SetConfig
+* Handle Set device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ static uint8_t cfgidx;
+
+ cfgidx = (uint8_t)(req->wValue);
+
+ if (cfgidx > USBD_MAX_NUM_CONFIGURATION )
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if (cfgidx)
+ {
+ pdev->dev_config = cfgidx;
+ pdev->dev_state = USBD_STATE_CONFIGURED;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (cfgidx == 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ pdev->dev_config = cfgidx;
+ USBD_ClrClassConfig(pdev , cfgidx);
+ USBD_CtlSendStatus(pdev);
+
+ }
+ else if (cfgidx != pdev->dev_config)
+ {
+ /* Clear old configuration */
+ USBD_ClrClassConfig(pdev , pdev->dev_config);
+
+ /* set new configuration */
+ pdev->dev_config = cfgidx;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetConfig
+* Handle Get device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wLength != 1)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state )
+ {
+ case USBD_STATE_ADDRESSED:
+ pdev->dev_default_config = 0;
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_default_config,
+ 1);
+ break;
+
+ case USBD_STATE_CONFIGURED:
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_config,
+ 1);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetStatus
+* Handle Get Status request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+
+#if ( USBD_SELF_POWERED == 1)
+ pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
+#else
+ pdev->dev_config_status = 0;
+#endif
+
+ if (pdev->dev_remote_wakeup)
+ {
+ pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)& pdev->dev_config_status,
+ 2);
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+
+/**
+* @brief USBD_SetFeature
+* Handle Set device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 1;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+
+}
+
+
+/**
+* @brief USBD_ClrFeature
+* Handle clear device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 0;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+/**
+* @brief USBD_ParseSetupRequest
+* Copy buffer into setup structure
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
+{
+ req->bmRequest = *(uint8_t *) (pdata);
+ req->bRequest = *(uint8_t *) (pdata + 1);
+ req->wValue = SWAPBYTE (pdata + 2);
+ req->wIndex = SWAPBYTE (pdata + 4);
+ req->wLength = SWAPBYTE (pdata + 6);
+
+}
+
+/**
+* @brief USBD_CtlError
+* Handle USB low level Error
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_CtlError( USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_LL_StallEP(pdev , 0x80);
+ USBD_LL_StallEP(pdev , 0);
+}
+
+
+/**
+ * @brief USBD_GetString
+ * Convert Ascii string into unicode one
+ * @param desc : descriptor buffer
+ * @param unicode : Formatted string buffer (unicode)
+ * @param len : descriptor length
+ * @retval None
+ */
+void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
+{
+ uint8_t idx = 0;
+
+ if (desc != NULL)
+ {
+ *len = USBD_GetLen(desc) * 2 + 2;
+ unicode[idx++] = *len;
+ unicode[idx++] = USB_DESC_TYPE_STRING;
+
+ while (*desc != '\0')
+ {
+ unicode[idx++] = *desc++;
+ unicode[idx++] = 0x00;
+ }
+ }
+}
+
+/**
+ * @brief USBD_GetLen
+ * return the string length
+ * @param buf : pointer to the ascii string buffer
+ * @retval string length
+ */
+static uint8_t USBD_GetLen(uint8_t *buf)
+{
+ uint8_t len = 0;
+
+ while (*buf != '\0')
+ {
+ len++;
+ buf++;
+ }
+
+ return len;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Src/usbd_desc.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Src/usbd_desc.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,372 @@
+/**
+ ******************************************************************************
+ * @file : usbd_desc.c
+ * @version : v1.0_Cube
+ * @brief : This file implements the USB Device descriptors
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_DESC
+ * @brief USBD descriptors module
+ * @{
+ */
+
+/** @defgroup USBD_DESC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Defines
+ * @{
+ */
+#define USBD_VID 0x0483
+#define USBD_PID_FS 0x5740
+#define USBD_LANGID_STRING 0x409
+#define USBD_MANUFACTURER_STRING "STMicroelectronics"
+#define USBD_PRODUCT_STRING_FS "SEMTECH PicoGW Virtual ComPort"
+#define USBD_SERIALNUMBER_STRING_FS "3EA5F0C2B81C"
+#define USBD_CONFIGURATION_STRING_FS "CDC Config"
+#define USBD_INTERFACE_STRING_FS "CDC Interface"
+
+#define USB_SIZ_BOS_DESC 0x0C
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0*/
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Variables
+ * @{
+ */
+uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_ManufacturerStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_ProductStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
+
+#ifdef USB_SUPPORT_USER_STRING_DESC
+uint8_t * USBD_FS_USRStringDesc (USBD_SpeedTypeDef speed, uint8_t idx , uint16_t *length);
+#endif /* USB_SUPPORT_USER_STRING_DESC */
+
+#if (USBD_LPM_ENABLED == 1)
+uint8_t *USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed , uint16_t *length);
+#endif
+
+USBD_DescriptorsTypeDef FS_Desc =
+{
+ USBD_FS_DeviceDescriptor,
+ USBD_FS_LangIDStrDescriptor,
+ USBD_FS_ManufacturerStrDescriptor,
+ USBD_FS_ProductStrDescriptor,
+ USBD_FS_SerialStrDescriptor,
+ USBD_FS_ConfigStrDescriptor,
+ USBD_FS_InterfaceStrDescriptor,
+#if (USBD_LPM_ENABLED == 1)
+ USBD_FS_USR_BOSDescriptor,
+#endif
+};
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
+ {
+ 0x12, /*bLength */
+ USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
+#if (USBD_LPM_ENABLED == 1)
+ 0x01, /*bcdUSB */ /* changed to USB version 2.01
+ // in order to support LPM L1 suspend
+ // resume test of USBCV3.0*/
+#else
+ 0x00, /* bcdUSB */
+#endif
+ 0x02,
+ 0x02, /*bDeviceClass*/
+ 0x02, /*bDeviceSubClass*/
+ 0x00, /*bDeviceProtocol*/
+ USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
+ LOBYTE(USBD_VID), /*idVendor*/
+ HIBYTE(USBD_VID), /*idVendor*/
+ LOBYTE(USBD_PID_FS), /*idVendor*/
+ HIBYTE(USBD_PID_FS), /*idVendor*/
+ 0x00, /*bcdDevice rel. 2.00*/
+ 0x02,
+ USBD_IDX_MFC_STR, /*Index of manufacturer string*/
+ USBD_IDX_PRODUCT_STR, /*Index of product string*/
+ USBD_IDX_SERIAL_STR, /*Index of serial number string*/
+ USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
+ } ;
+/* USB_DeviceDescriptor */
+
+
+/*
+
+{
+0x12, // Descriptor size in bytes
+ 0x01, // DEVICE descriptor type
+ 0x00,
+ 0x02, // USB version, BCD (2.0)
+ 0x02, // Class: CDC
+ 0x00, // Subclass: none
+ 0x00, // Protocol: none
+ 0x08, // Max. packet size, Endpoint 0
+ 0x25,
+ 0x09, // USB Vendor ID
+ 0x60,
+ 0x90, // USB Product ID
+ 0x00,
+ 0x01, // Device release, BCD (1.0)
+ 0x00, // Manufacturer string index
+ 0x00, // Product string index
+ 0x01, // Serial number string index
+ 0x01 // Number of configurations
+};*/
+/* BOS descriptor */
+#if (USBD_LPM_ENABLED == 1)
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t USBD_FS_BOSDesc[USB_SIZ_BOS_DESC] __ALIGN_END =
+{
+ 0x5,
+ USB_DESC_TYPE_BOS,
+ 0xC,
+ 0x0,
+ 0x1, /* 1 device capability */
+ /* device capability*/
+ 0x7,
+ USB_DEVICE_CAPABITY_TYPE,
+ 0x2,
+ 0x2, /*LPM capability bit set */
+ 0x0,
+ 0x0,
+ 0x0
+};
+#endif
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
+{
+ USB_LEN_LANGID_STR_DESC,
+ USB_DESC_TYPE_STRING,
+ LOBYTE(USBD_LANGID_STRING),
+ HIBYTE(USBD_LANGID_STRING),
+};
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_FS_DeviceDescriptor
+* return the device descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ *length = sizeof(USBD_FS_DeviceDesc);
+ return USBD_FS_DeviceDesc;
+}
+
+/**
+* @brief USBD_FS_LangIDStrDescriptor
+* return the LangID string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ *length = sizeof(USBD_LangIDDesc);
+ return USBD_LangIDDesc;
+}
+
+/**
+* @brief USBD_FS_ProductStrDescriptor
+* return the product string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_ProductStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString ((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString ((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_FS_ManufacturerStrDescriptor
+* return the manufacturer string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_ManufacturerStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ USBD_GetString ((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_FS_SerialStrDescriptor
+* return the serial number string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString ((uint8_t *)USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString ((uint8_t *)USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_FS_ConfigStrDescriptor
+* return the configuration string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString ((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString ((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_HS_InterfaceStrDescriptor
+* return the interface string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString ((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString ((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+#if (USBD_LPM_ENABLED == 1)
+/**
+ * @brief USBD_FS_USR_BOSDescriptor
+ * return the BOS descriptor
+ * @param speed : current device speed
+ * @param length : pointer to data length variable
+ * @retval pointer to descriptor buffer
+ */
+uint8_t *USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed , uint16_t *length)
+{
+ *length = sizeof(USBD_FS_BOSDesc);
+ return (uint8_t*)USBD_FS_BOSDesc;
+}
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/Src/usbd_ioreq.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/Src/usbd_ioreq.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,236 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the IO requests APIs for control endpoints.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_IOREQ
+ * @brief control I/O requests module
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_CtlSendData
+* send data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_IN;
+ pdev->ep_in[0].total_length = len;
+ pdev->ep_in[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueSendData
+* continue sending data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Start the next transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlPrepareRx
+* receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_OUT;
+ pdev->ep_out[0].total_length = len;
+ pdev->ep_out[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueRx
+* continue receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+ return USBD_OK;
+}
+/**
+* @brief USBD_CtlSendStatus
+* send zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
+{
+
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_IN;
+
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, NULL, 0);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlReceiveStatus
+* receive zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_OUT;
+
+ /* Start the transfer */
+ USBD_LL_PrepareReceive ( pdev,
+ 0,
+ NULL,
+ 0);
+
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_GetRxCount
+* returns the received data length
+* @param pdev: device instance
+* @param ep_addr: endpoint address
+* @retval Rx Data blength
+*/
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr)
+{
+ return USBD_LL_GetRxDataSize(pdev, ep_addr);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/AnalogIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/AnalogIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,128 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_H
+#define MBED_ANALOGIN_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGIN
+
+#include "analogin_api.h"
+#include "SingletonPtr.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** An analog input, used for reading the voltage on a pin
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * // Print messages when the AnalogIn is greater than 50%
+ *
+ * #include "mbed.h"
+ *
+ * AnalogIn temperature(p20);
+ *
+ * int main() {
+ * while(1) {
+ * if(temperature > 0.5) {
+ * printf("Too hot! (%f)", temperature.read());
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogIn {
+
+public:
+
+ /** Create an AnalogIn, connected to the specified pin
+ *
+ * @param pin AnalogIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ AnalogIn(PinName pin) {
+ lock();
+ analogin_init(&_adc, pin);
+ unlock();
+ }
+
+ /** Read the input voltage, represented as a float in the range [0.0, 1.0]
+ *
+ * @returns A floating-point value representing the current input voltage, measured as a percentage
+ */
+ float read() {
+ lock();
+ float ret = analogin_read(&_adc);
+ unlock();
+ return ret;
+ }
+
+ /** Read the input voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @returns
+ * 16-bit unsigned short representing the current input voltage, normalised to a 16-bit value
+ */
+ unsigned short read_u16() {
+ lock();
+ unsigned short ret = analogin_read_u16(&_adc);
+ unlock();
+ return ret;
+ }
+
+ /** An operator shorthand for read()
+ *
+ * The float() operator can be used as a shorthand for read() to simplify common code sequences
+ *
+ * Example:
+ * @code
+ * float x = volume.read();
+ * float x = volume;
+ *
+ * if(volume.read() > 0.25) { ... }
+ * if(volume > 0.25) { ... }
+ * @endcode
+ */
+ operator float() {
+ // Underlying call is thread safe
+ return read();
+ }
+
+ virtual ~AnalogIn() {
+ // Do nothing
+ }
+
+protected:
+
+ virtual void lock() {
+ _mutex->lock();
+ }
+
+ virtual void unlock() {
+ _mutex->unlock();
+ }
+
+ analogin_t _adc;
+ static SingletonPtr<PlatformMutex> _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/AnalogOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/AnalogOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,146 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_H
+#define MBED_ANALOGOUT_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "analogout_api.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** An analog output, used for setting the voltage on a pin
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * // Make a sawtooth output
+ *
+ * #include "mbed.h"
+ *
+ * AnalogOut tri(p18);
+ * int main() {
+ * while(1) {
+ * tri = tri + 0.01;
+ * wait_us(1);
+ * if(tri == 1) {
+ * tri = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogOut {
+
+public:
+
+ /** Create an AnalogOut connected to the specified pin
+ *
+ * @param AnalogOut pin to connect to (18)
+ */
+ AnalogOut(PinName pin) {
+ analogout_init(&_dac, pin);
+ }
+
+ /** Set the output voltage, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output voltage,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ lock();
+ analogout_write(&_dac, value);
+ unlock();
+ }
+
+ /** Set the output voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @param value 16-bit unsigned short representing the output voltage,
+ * normalised to a 16-bit value (0x0000 = 0v, 0xFFFF = 3.3v)
+ */
+ void write_u16(unsigned short value) {
+ lock();
+ analogout_write_u16(&_dac, value);
+ unlock();
+ }
+
+ /** Return the current output voltage setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current voltage being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous write().
+ */
+ float read() {
+ lock();
+ float ret = analogout_read(&_dac);
+ unlock();
+ return ret;
+ }
+
+ /** An operator shorthand for write()
+ */
+ AnalogOut& operator= (float percent) {
+ // Underlying write call is thread safe
+ write(percent);
+ return *this;
+ }
+
+ AnalogOut& operator= (AnalogOut& rhs) {
+ // Underlying write call is thread safe
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ // Underlying read call is thread safe
+ return read();
+ }
+
+ virtual ~AnalogOut() {
+ // Do nothing
+ }
+
+protected:
+
+ virtual void lock() {
+ _mutex.lock();
+ }
+
+ virtual void unlock() {
+ _mutex.unlock();
+ }
+
+ dac_t _dac;
+ PlatformMutex _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/BusIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/BusIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSIN_H
+#define MBED_BUSIN_H
+
+#include "platform.h"
+#include "DigitalIn.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** A digital input bus, used for reading the state of a collection of pins
+ *
+ * @Note Synchronization level: Thread safe
+ */
+class BusIn {
+
+public:
+ /* Group: Configuration Methods */
+
+ /** Create an BusIn, connected to the specified pins
+ *
+ * @param <n> DigitalIn pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusIn(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusIn(PinName pins[16]);
+
+ virtual ~BusIn();
+
+ /** Read the value of the input bus
+ *
+ * @returns
+ * An integer with each bit corresponding to the value read from the associated DigitalIn pin
+ */
+ int read();
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ // No lock needed since _nc_mask is not modified outside the constructor
+ return _nc_mask;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int();
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalIn & operator[] (int index);
+
+protected:
+ DigitalIn* _pin[16];
+
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
+ PlatformMutex _mutex;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ virtual void lock();
+ virtual void unlock();
+ BusIn(const BusIn&);
+ BusIn & operator = (const BusIn&);
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/BusInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/BusInOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,123 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSINOUT_H
+#define MBED_BUSINOUT_H
+
+#include "DigitalInOut.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** A digital input output bus, used for setting the state of a collection of pins
+ *
+ * @Note Synchronization level: Thread safe
+ */
+class BusInOut {
+
+public:
+
+ /** Create an BusInOut, connected to the specified pins
+ *
+ * @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusInOut(PinName pins[16]);
+
+ virtual ~BusInOut();
+
+ /* Group: Access Methods */
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalInOut pin
+ */
+ void write(int value);
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalInOut pin setting
+ */
+ int read();
+
+ /** Set as an output
+ */
+ void output();
+
+ /** Set as an input
+ */
+ void input();
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ // No lock needed since _nc_mask is not modified outside the constructor
+ return _nc_mask;
+ }
+
+ /** A shorthand for write()
+ */
+ BusInOut& operator= (int v);
+ BusInOut& operator= (BusInOut& rhs);
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalInOut& operator[] (int index);
+
+ /** A shorthand for read()
+ */
+ operator int();
+
+protected:
+ virtual void lock();
+ virtual void unlock();
+ DigitalInOut* _pin[16];
+
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
+ PlatformMutex _mutex;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ BusInOut(const BusInOut&);
+ BusInOut & operator = (const BusInOut&);
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/BusOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/BusOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,107 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSOUT_H
+#define MBED_BUSOUT_H
+
+#include "DigitalOut.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** A digital output bus, used for setting the state of a collection of pins
+ */
+class BusOut {
+
+public:
+
+ /** Create an BusOut, connected to the specified pins
+ *
+ * @param p<n> DigitalOut pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusOut(PinName pins[16]);
+
+ virtual ~BusOut();
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalOut pin
+ */
+ void write(int value);
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalOut pin setting
+ */
+ int read();
+
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ // No lock needed since _nc_mask is not modified outside the constructor
+ return _nc_mask;
+ }
+
+ /** A shorthand for write()
+ */
+ BusOut& operator= (int v);
+ BusOut& operator= (BusOut& rhs);
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalOut& operator[] (int index);
+
+ /** A shorthand for read()
+ */
+ operator int();
+
+protected:
+ virtual void lock();
+ virtual void unlock();
+ DigitalOut* _pin[16];
+
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
+ PlatformMutex _mutex;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ BusOut(const BusOut&);
+ BusOut & operator = (const BusOut&);
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/CAN.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/CAN.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,259 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_H
+#define MBED_CAN_H
+
+#include "platform.h"
+
+#if DEVICE_CAN
+
+#include "can_api.h"
+#include "can_helper.h"
+#include "Callback.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** CANMessage class
+ *
+ * @Note Synchronization level: Thread safe
+ */
+class CANMessage : public CAN_Message {
+
+public:
+ /** Creates empty CAN message.
+ */
+ CANMessage() : CAN_Message() {
+ len = 8;
+ type = CANData;
+ format = CANStandard;
+ id = 0;
+ memset(data, 0, 8);
+ }
+
+ /** Creates CAN message with specific content.
+ */
+ CANMessage(int _id, const char *_data, char _len = 8, CANType _type = CANData, CANFormat _format = CANStandard) {
+ len = _len & 0xF;
+ type = _type;
+ format = _format;
+ id = _id;
+ memcpy(data, _data, _len);
+ }
+
+ /** Creates CAN remote message.
+ */
+ CANMessage(int _id, CANFormat _format = CANStandard) {
+ len = 0;
+ type = CANRemote;
+ format = _format;
+ id = _id;
+ memset(data, 0, 8);
+ }
+};
+
+/** A can bus client, used for communicating with can devices
+ */
+class CAN {
+
+public:
+ /** Creates an CAN interface connected to specific pins.
+ *
+ * @param rd read from transmitter
+ * @param td transmit to transmitter
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * Ticker ticker;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ * CAN can1(p9, p10);
+ * CAN can2(p30, p29);
+ *
+ * char counter = 0;
+ *
+ * void send() {
+ * if(can1.write(CANMessage(1337, &counter, 1))) {
+ * printf("Message sent: %d\n", counter);
+ * counter++;
+ * }
+ * led1 = !led1;
+ * }
+ *
+ * int main() {
+ * ticker.attach(&send, 1);
+ * CANMessage msg;
+ * while(1) {
+ * if(can2.read(msg)) {
+ * printf("Message received: %d\n\n", msg.data[0]);
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+ CAN(PinName rd, PinName td);
+ virtual ~CAN();
+
+ /** Set the frequency of the CAN interface
+ *
+ * @param hz The bus frequency in hertz
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise
+ */
+ int frequency(int hz);
+
+ /** Write a CANMessage to the bus.
+ *
+ * @param msg The CANMessage to write.
+ *
+ * @returns
+ * 0 if write failed,
+ * 1 if write was successful
+ */
+ int write(CANMessage msg);
+
+ /** Read a CANMessage from the bus.
+ *
+ * @param msg A CANMessage to read to.
+ * @param handle message filter handle (0 for any message)
+ *
+ * @returns
+ * 0 if no message arrived,
+ * 1 if message arrived
+ */
+ int read(CANMessage &msg, int handle = 0);
+
+ /** Reset CAN interface.
+ *
+ * To use after error overflow.
+ */
+ void reset();
+
+ /** Puts or removes the CAN interface into silent monitoring mode
+ *
+ * @param silent boolean indicating whether to go into silent mode or not
+ */
+ void monitor(bool silent);
+
+ enum Mode {
+ Reset = 0,
+ Normal,
+ Silent,
+ LocalTest,
+ GlobalTest,
+ SilentTest
+ };
+
+ /** Change CAN operation to the specified mode
+ *
+ * @param mode The new operation mode (CAN::Normal, CAN::Silent, CAN::LocalTest, CAN::GlobalTest, CAN::SilentTest)
+ *
+ * @returns
+ * 0 if mode change failed or unsupported,
+ * 1 if mode change was successful
+ */
+ int mode(Mode mode);
+
+ /** Filter out incomming messages
+ *
+ * @param id the id to filter on
+ * @param mask the mask applied to the id
+ * @param format format to filter on (Default CANAny)
+ * @param handle message filter handle (Optional)
+ *
+ * @returns
+ * 0 if filter change failed or unsupported,
+ * new filter handle if successful
+ */
+ int filter(unsigned int id, unsigned int mask, CANFormat format = CANAny, int handle = 0);
+
+ /** Returns number of read errors to detect read overflow errors.
+ */
+ unsigned char rderror();
+
+ /** Returns number of write errors to detect write overflow errors.
+ */
+ unsigned char tderror();
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq,
+ EwIrq,
+ DoIrq,
+ WuIrq,
+ EpIrq,
+ AlIrq,
+ BeIrq,
+ IdIrq,
+
+ IrqCnt
+ };
+
+ /** Attach a function to call whenever a CAN frame received interrupt is
+ * generated.
+ *
+ * @param func A pointer to a void function, or 0 to set as none
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, CAN::TxIrq for transmitted or aborted, CAN::EwIrq for error warning, CAN::DoIrq for data overrun, CAN::WuIrq for wake-up, CAN::EpIrq for error passive, CAN::AlIrq for arbitration lost, CAN::BeIrq for bus error)
+ */
+ void attach(Callback<void()> func, IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a CAN frame received interrupt
+ * is generated.
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, TxIrq for transmitted or aborted, EwIrq for error warning, DoIrq for data overrun, WuIrq for wake-up, EpIrq for error passive, AlIrq for arbitration lost, BeIrq for bus error)
+ */
+ template<typename T>
+ void attach(T* obj, void (T::*method)(), IrqType type=RxIrq) {
+ // Underlying call thread safe
+ attach(Callback<void()>(obj, method), type);
+ }
+
+ /** Attach a member function to call whenever a CAN frame received interrupt
+ * is generated.
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, TxIrq for transmitted or aborted, EwIrq for error warning, DoIrq for data overrun, WuIrq for wake-up, EpIrq for error passive, AlIrq for arbitration lost, BeIrq for bus error)
+ */
+ template<typename T>
+ void attach(T* obj, void (*method)(T*), IrqType type=RxIrq) {
+ // Underlying call thread safe
+ attach(Callback<void()>(obj, method), type);
+ }
+
+ static void _irq_handler(uint32_t id, CanIrqType type);
+
+protected:
+ virtual void lock();
+ virtual void unlock();
+ can_t _can;
+ Callback<void()> _irq[IrqCnt];
+ PlatformMutex _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif // MBED_CAN_H
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/CThunk.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/CThunk.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,234 @@
+/* General C++ Object Thunking class
+ *
+ * - allows direct callbacks to non-static C++ class functions
+ * - keeps track for the corresponding class instance
+ * - supports an optional context parameter for the called function
+ * - ideally suited for class object receiving interrupts (NVIC_SetVector)
+ *
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/* General C++ Object Thunking class
+ *
+ * - allows direct callbacks to non-static C++ class functions
+ * - keeps track for the corresponding class instance
+ * - supports an optional context parameter for the called function
+ * - ideally suited for class object receiving interrupts (NVIC_SetVector)
+ */
+
+#ifndef __CTHUNK_H__
+#define __CTHUNK_H__
+
+#define CTHUNK_ADDRESS 1
+
+#if (defined(__CORTEX_M3) || defined(__CORTEX_M4) || defined(__thumb2__)) && ! defined(__CORTEX_A9)
+#define CTHUNK_VARIABLES volatile uint32_t code[1]
+/**
+* CTHUNK disassembly for Cortex-M3/M4 (thumb2):
+* * ldm.w pc,{r0,r1,r2,pc}
+*
+* This instruction loads the arguments for the static thunking function to r0-r2, and
+* branches to that function by loading its address into PC.
+*
+* This is safe for both regular calling and interrupt calling, since it only touches scratch registers
+* which should be saved by the caller, and are automatically saved as part of the IRQ context switch.
+*/
+#define CTHUNK_ASSIGMENT m_thunk.code[0] = 0x8007E89F
+
+#elif defined(__CORTEX_M0PLUS) || defined(__CORTEX_M0) || defined(__CORTEX_A9)
+/*
+* CTHUNK disassembly for Cortex M0 (thumb):
+* * push {r0,r1,r2,r3,r4,lr} save touched registers and return address
+* * movs r4,#4 set up address to load arguments from (immediately following this code block) (1)
+* * add r4,pc set up address to load arguments from (immediately following this code block) (2)
+* * ldm r4!,{r0,r1,r2,r3} load arguments for static thunk function
+* * blx r3 call static thunk function
+* * pop {r0,r1,r2,r3,r4,pc} restore scratch registers and return from function
+*/
+#define CTHUNK_VARIABLES volatile uint32_t code[3]
+#define CTHUNK_ASSIGMENT do { \
+ m_thunk.code[0] = 0x2404B51F; \
+ m_thunk.code[1] = 0xCC0F447C; \
+ m_thunk.code[2] = 0xBD1F4798; \
+ } while (0)
+
+#else
+#error "Target is not currently suported."
+#endif
+
+/* IRQ/Exception compatible thunk entry function */
+typedef void (*CThunkEntry)(void);
+
+/**
+ * Class for created a pointer with data bound to it
+ *
+ * @Note Synchronization level: Not protected
+ */
+template<class T>
+class CThunk
+{
+ public:
+ typedef void (T::*CCallbackSimple)(void);
+ typedef void (T::*CCallback)(void* context);
+
+ inline CThunk(T *instance)
+ {
+ init(instance, NULL, NULL);
+ }
+
+ inline CThunk(T *instance, CCallback callback)
+ {
+ init(instance, callback, NULL);
+ }
+
+ ~CThunk() {
+
+ }
+
+ inline CThunk(T *instance, CCallbackSimple callback)
+ {
+ init(instance, (CCallback)callback, NULL);
+ }
+
+ inline CThunk(T &instance, CCallback callback)
+ {
+ init(instance, callback, NULL);
+ }
+
+ inline CThunk(T &instance, CCallbackSimple callback)
+ {
+ init(instance, (CCallback)callback, NULL);
+ }
+
+ inline CThunk(T &instance, CCallback callback, void* context)
+ {
+ init(instance, callback, context);
+ }
+
+ inline void callback(CCallback callback)
+ {
+ m_callback = callback;
+ }
+
+ inline void callback(CCallbackSimple callback)
+ {
+ m_callback = (CCallback)callback;
+ }
+
+ inline void context(void* context)
+ {
+ m_thunk.context = (uint32_t)context;
+ }
+
+ inline void context(uint32_t context)
+ {
+ m_thunk.context = context;
+ }
+
+ inline uint32_t entry(void)
+ {
+ return (((uint32_t)&m_thunk)|CTHUNK_ADDRESS);
+ }
+
+ /* get thunk entry point for connecting rhunk to an IRQ table */
+ inline operator CThunkEntry(void)
+ {
+ return (CThunkEntry)entry();
+ }
+
+ /* get thunk entry point for connecting rhunk to an IRQ table */
+ inline operator uint32_t(void)
+ {
+ return entry();
+ }
+
+ /* simple test function */
+ inline void call(void)
+ {
+ (((CThunkEntry)(entry()))());
+ }
+
+ private:
+ T* m_instance;
+ volatile CCallback m_callback;
+
+// TODO: this needs proper fix, to refactor toolchain header file and all its use
+// PACKED there is not defined properly for IAR
+#if defined (__ICCARM__)
+ typedef __packed struct
+ {
+ CTHUNK_VARIABLES;
+ volatile uint32_t instance;
+ volatile uint32_t context;
+ volatile uint32_t callback;
+ volatile uint32_t trampoline;
+ } CThunkTrampoline;
+#else
+ typedef struct
+ {
+ CTHUNK_VARIABLES;
+ volatile uint32_t instance;
+ volatile uint32_t context;
+ volatile uint32_t callback;
+ volatile uint32_t trampoline;
+ } __attribute__((__packed__)) CThunkTrampoline;
+#endif
+
+ static void trampoline(T* instance, void* context, CCallback* callback)
+ {
+ if(instance && *callback) {
+ (static_cast<T*>(instance)->**callback)(context);
+ }
+ }
+
+ volatile CThunkTrampoline m_thunk;
+
+ inline void init(T *instance, CCallback callback, void* context)
+ {
+ /* remember callback - need to add this level of redirection
+ as pointer size for member functions differs between platforms */
+ m_callback = callback;
+
+ /* populate thunking trampoline */
+ CTHUNK_ASSIGMENT;
+ m_thunk.context = (uint32_t)context;
+ m_thunk.instance = (uint32_t)instance;
+ m_thunk.callback = (uint32_t)&m_callback;
+ m_thunk.trampoline = (uint32_t)&trampoline;
+
+#if defined(__CORTEX_A9)
+ /* Data cache clean */
+ /* Cache control */
+ {
+ uint32_t start_addr = (uint32_t)&m_thunk & 0xFFFFFFE0;
+ uint32_t end_addr = (uint32_t)&m_thunk + sizeof(m_thunk);
+ uint32_t addr;
+
+ /* Data cache clean and invalid */
+ for (addr = start_addr; addr < end_addr; addr += 0x20) {
+ __v7_clean_inv_dcache_mva((void *)addr);
+ }
+ /* Instruction cache invalid */
+ __v7_inv_icache_all();
+ __ca9u_inv_tlb_all();
+ __v7_inv_btac();
+ }
+#endif
+ __ISB();
+ __DSB();
+ }
+};
+
+#endif/*__CTHUNK_H__*/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/CallChain.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/CallChain.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,173 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CALLCHAIN_H
+#define MBED_CALLCHAIN_H
+
+#include "Callback.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Group one or more functions in an instance of a CallChain, then call them in
+ * sequence using CallChain::call(). Used mostly by the interrupt chaining code,
+ * but can be used for other purposes.
+ *
+ * @Note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * CallChain chain;
+ *
+ * void first(void) {
+ * printf("'first' function.\n");
+ * }
+ *
+ * void second(void) {
+ * printf("'second' function.\n");
+ * }
+ *
+ * class Test {
+ * public:
+ * void f(void) {
+ * printf("A::f (class member).\n");
+ * }
+ * };
+ *
+ * int main() {
+ * Test test;
+ *
+ * chain.add(second);
+ * chain.add_front(first);
+ * chain.add(&test, &Test::f);
+ * chain.call();
+ * }
+ * @endcode
+ */
+
+typedef Callback<void()> *pFunctionPointer_t;
+class CallChainLink;
+
+class CallChain {
+public:
+ /** Create an empty chain
+ *
+ * @param size (optional) Initial size of the chain
+ */
+ CallChain(int size = 4);
+ virtual ~CallChain();
+
+ /** Add a function at the end of the chain
+ *
+ * @param func A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'func'
+ */
+ pFunctionPointer_t add(Callback<void()> func);
+
+ /** Add a function at the end of the chain
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'obj' and 'method'
+ */
+ template<typename T, typename M>
+ pFunctionPointer_t add(T *obj, M method) {
+ return add(Callback<void()>(obj, method));
+ }
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param func A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'func'
+ */
+ pFunctionPointer_t add_front(Callback<void()> func);
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T, typename M>
+ pFunctionPointer_t add_front(T *obj, M method) {
+ return add_front(Callback<void()>(obj, method));
+ }
+
+ /** Get the number of functions in the chain
+ */
+ int size() const;
+
+ /** Get a function object from the chain
+ *
+ * @param i function object index
+ *
+ * @returns
+ * The function object at position 'i' in the chain
+ */
+ pFunctionPointer_t get(int i) const;
+
+ /** Look for a function object in the call chain
+ *
+ * @param f the function object to search
+ *
+ * @returns
+ * The index of the function object if found, -1 otherwise.
+ */
+ int find(pFunctionPointer_t f) const;
+
+ /** Clear the call chain (remove all functions in the chain).
+ */
+ void clear();
+
+ /** Remove a function object from the chain
+ *
+ * @arg f the function object to remove
+ *
+ * @returns
+ * true if the function object was found and removed, false otherwise.
+ */
+ bool remove(pFunctionPointer_t f);
+
+ /** Call all the functions in the chain in sequence
+ */
+ void call();
+
+ void operator ()(void) {
+ call();
+ }
+ pFunctionPointer_t operator [](int i) const {
+ return get(i);
+ }
+
+ /* disallow copy constructor and assignment operators */
+private:
+ CallChain(const CallChain&);
+ CallChain & operator = (const CallChain&);
+ CallChainLink *_chain;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/Callback.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/Callback.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,883 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CALLBACK_H
+#define MBED_CALLBACK_H
+
+#include <string.h>
+#include <stdint.h>
+
+namespace mbed {
+
+
+/** Callback class based on template specialization
+ *
+ * @Note Synchronization level: Not protected
+ */
+template <typename F>
+class Callback;
+
+/** Templated function class
+ */
+template <typename R, typename A0, typename A1, typename A2, typename A3, typename A4>
+class Callback<R(A0, A1, A2, A3, A4)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0, A1, A2, A3, A4) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0, A1, A2, A3, A4)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0, A1, A2, A3, A4)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0, A1, A2, A3, A4)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0, A1, A2, A3, A4)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0, A1, A2, A3, A4)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0, A1, A2, A3, A4)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0, A1, A2, A3, A4)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0, a1, a2, a3, a4);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return call(a0, a1, a2, a3, a4);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return static_cast<Callback<R(A0, A1, A2, A3, A4)>*>(func)
+ ->call(a0, a1, a2, a3, a4);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return (*reinterpret_cast<R (**)(A0, A1, A2, A3, A4)>(func))
+ (a0, a1, a2, a3, a4);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return (*reinterpret_cast<R (**)(T*, A0, A1, A2, A3, A4)>(func))
+ (static_cast<T*>(obj), a0, a1, a2, a3, a4);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2, A3 a3, A4 a4) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0, A1, A2, A3, A4)>(func)))
+ (a0, a1, a2, a3, a4);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0, A1, A2, A3, A4);
+};
+
+/** Templated function class
+ */
+template <typename R, typename A0, typename A1, typename A2, typename A3>
+class Callback<R(A0, A1, A2, A3)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0, A1, A2, A3) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0, A1, A2, A3)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0, A1, A2, A3)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0, A1, A2, A3)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0, A1, A2, A3)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0, A1, A2, A3)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0, A1, A2, A3)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0, A1, A2, A3)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0, A1 a1, A2 a2, A3 a3) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0, a1, a2, a3);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0, A1 a1, A2 a2, A3 a3) {
+ return call(a0, a1, a2, a3);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0, A1 a1, A2 a2, A3 a3) {
+ return static_cast<Callback<R(A0, A1, A2, A3)>*>(func)
+ ->call(a0, a1, a2, a3);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0, A1 a1, A2 a2, A3 a3) {
+ return (*reinterpret_cast<R (**)(A0, A1, A2, A3)>(func))
+ (a0, a1, a2, a3);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2, A3 a3) {
+ return (*reinterpret_cast<R (**)(T*, A0, A1, A2, A3)>(func))
+ (static_cast<T*>(obj), a0, a1, a2, a3);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2, A3 a3) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0, A1, A2, A3)>(func)))
+ (a0, a1, a2, a3);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0, A1, A2, A3);
+};
+
+/** Templated function class
+ */
+template <typename R, typename A0, typename A1, typename A2>
+class Callback<R(A0, A1, A2)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0, A1, A2) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0, A1, A2)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0, A1, A2)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0, A1, A2)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0, A1, A2)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0, A1, A2)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0, A1, A2)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0, A1, A2)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0, A1 a1, A2 a2) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0, a1, a2);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0, A1 a1, A2 a2) {
+ return call(a0, a1, a2);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0, A1 a1, A2 a2) {
+ return static_cast<Callback<R(A0, A1, A2)>*>(func)
+ ->call(a0, a1, a2);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0, A1 a1, A2 a2) {
+ return (*reinterpret_cast<R (**)(A0, A1, A2)>(func))
+ (a0, a1, a2);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2) {
+ return (*reinterpret_cast<R (**)(T*, A0, A1, A2)>(func))
+ (static_cast<T*>(obj), a0, a1, a2);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0, A1 a1, A2 a2) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0, A1, A2)>(func)))
+ (a0, a1, a2);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0, A1, A2);
+};
+
+/** Templated function class
+ */
+template <typename R, typename A0, typename A1>
+class Callback<R(A0, A1)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0, A1) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0, A1)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0, A1)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0, A1)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0, A1)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0, A1)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0, A1)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0, A1)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0, A1 a1) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0, a1);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0, A1 a1) {
+ return call(a0, a1);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0, A1 a1) {
+ return static_cast<Callback<R(A0, A1)>*>(func)
+ ->call(a0, a1);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0, A1 a1) {
+ return (*reinterpret_cast<R (**)(A0, A1)>(func))
+ (a0, a1);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0, A1 a1) {
+ return (*reinterpret_cast<R (**)(T*, A0, A1)>(func))
+ (static_cast<T*>(obj), a0, a1);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0, A1 a1) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0, A1)>(func)))
+ (a0, a1);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0, A1);
+};
+
+/** Templated function class
+ */
+template <typename R, typename A0>
+class Callback<R(A0)> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)(A0) = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*, A0)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)(A0)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R(A0)> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)(A0)) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*, A0)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)(A0)) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R(A0)> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call(A0 a0) {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func, a0);
+ }
+
+ /** Call the attached function
+ */
+ R operator()(A0 a0) {
+ return call(a0);
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func, A0 a0) {
+ return static_cast<Callback<R(A0)>*>(func)
+ ->call(a0);
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func, A0 a0) {
+ return (*reinterpret_cast<R (**)(A0)>(func))
+ (a0);
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func, A0 a0) {
+ return (*reinterpret_cast<R (**)(T*, A0)>(func))
+ (static_cast<T*>(obj), a0);
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func, A0 a0) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)(A0)>(func)))
+ (a0);
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*, A0);
+};
+
+/** Templated function class
+ */
+template <typename R>
+class Callback<R()> {
+public:
+ /** Create a Callback with a static function
+ * @param func Static function to attach
+ */
+ Callback(R (*func)() = 0) {
+ attach(func);
+ }
+
+ /** Create a Callback with a static function and bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (*func)(T*)) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ Callback(T *obj, R (T::*func)()) {
+ attach(obj, func);
+ }
+
+ /** Create a Callback with another Callback
+ * @param func Callback to attach
+ */
+ Callback(const Callback<R()> &func) {
+ attach(func);
+ }
+
+ /** Attach a static function
+ * @param func Static function to attach
+ */
+ void attach(R (*func)()) {
+ memcpy(&_func, &func, sizeof func);
+ _thunk = func ? &Callback::_staticthunk : 0;
+ }
+
+ /** Attach a static function with a bound pointer
+ * @param obj Pointer to object to bind to function
+ * @param func Static function to attach
+ */
+ template <typename T>
+ void attach(T *obj, R (*func)(T*)) {
+ _obj = (void*)obj;
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_boundthunk<T>;
+ }
+
+ /** Attach a member function
+ * @param obj Pointer to object to invoke member function on
+ * @param func Member function to attach
+ */
+ template<typename T>
+ void attach(T *obj, R (T::*func)()) {
+ _obj = static_cast<void*>(obj);
+ memcpy(&_func, &func, sizeof func);
+ _thunk = &Callback::_methodthunk<T>;
+ }
+
+ /** Attach a Callback
+ * @param func The Callback to attach
+ */
+ void attach(const Callback<R()> &func) {
+ _obj = func._obj;
+ memcpy(&_func, &func._func, sizeof _func);
+ _thunk = func._thunk;
+ }
+
+ /** Call the attached function
+ */
+ R call() {
+ if (!_thunk) {
+ return (R)0;
+ }
+ return _thunk(_obj, &_func);
+ }
+
+ /** Call the attached function
+ */
+ R operator()() {
+ return call();
+ }
+
+ /** Test if function has been attached
+ */
+ operator bool() const {
+ return _thunk;
+ }
+
+ /** Static thunk for passing as C-style function
+ * @param func Callback to call passed as void pointer
+ */
+ static R thunk(void *func) {
+ return static_cast<Callback<R()>*>(func)
+ ->call();
+ }
+
+private:
+ // Internal thunks for various function types
+ static R _staticthunk(void*, void *func) {
+ return (*reinterpret_cast<R (**)()>(func))
+ ();
+ }
+
+ template<typename T>
+ static R _boundthunk(void *obj, void *func) {
+ return (*reinterpret_cast<R (**)(T*)>(func))
+ (static_cast<T*>(obj));
+ }
+
+ template<typename T>
+ static R _methodthunk(void *obj, void *func) {
+ return (static_cast<T*>(obj)->*
+ (*reinterpret_cast<R (T::**)()>(func)))
+ ();
+ }
+
+ // Stored as pointer to function and pointer to optional object
+ // Function pointer is stored as union of possible function types
+ // to garuntee proper size and alignment
+ struct _class;
+ union {
+ void (*_staticfunc)();
+ void (*_boundfunc)(_class *);
+ void (_class::*_methodfunc)();
+ } _func;
+
+ void *_obj;
+
+ // Thunk registered on attach to dispatch calls
+ R (*_thunk)(void*, void*);
+};
+
+ typedef Callback<void(int)> event_callback_t;
+
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/CircularBuffer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/CircularBuffer.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CIRCULARBUFFER_H
+#define MBED_CIRCULARBUFFER_H
+
+#include "critical.h"
+
+namespace mbed {
+
+/** Templated Circular buffer class
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+template<typename T, uint32_t BufferSize, typename CounterType = uint32_t>
+class CircularBuffer {
+public:
+ CircularBuffer() : _head(0), _tail(0), _full(false) {
+ }
+
+ ~CircularBuffer() {
+ }
+
+ /** Push the transaction to the buffer. This overwrites the buffer if it's
+ * full
+ *
+ * @param data Data to be pushed to the buffer
+ */
+ void push(const T& data) {
+ core_util_critical_section_enter();
+ if (full()) {
+ _tail++;
+ _tail %= BufferSize;
+ }
+ _pool[_head++] = data;
+ _head %= BufferSize;
+ if (_head == _tail) {
+ _full = true;
+ }
+ core_util_critical_section_exit();
+ }
+
+ /** Pop the transaction from the buffer
+ *
+ * @param data Data to be pushed to the buffer
+ * @return True if the buffer is not empty and data contains a transaction, false otherwise
+ */
+ bool pop(T& data) {
+ bool data_popped = false;
+ core_util_critical_section_enter();
+ if (!empty()) {
+ data = _pool[_tail++];
+ _tail %= BufferSize;
+ _full = false;
+ data_popped = true;
+ }
+ core_util_critical_section_exit();
+ return data_popped;
+ }
+
+ /** Check if the buffer is empty
+ *
+ * @return True if the buffer is empty, false if not
+ */
+ bool empty() {
+ core_util_critical_section_enter();
+ bool is_empty = (_head == _tail) && !_full;
+ core_util_critical_section_exit();
+ return is_empty;
+ }
+
+ /** Check if the buffer is full
+ *
+ * @return True if the buffer is full, false if not
+ */
+ bool full() {
+ core_util_critical_section_enter();
+ bool full = _full;
+ core_util_critical_section_exit();
+ return full;
+ }
+
+ /** Reset the buffer
+ *
+ */
+ void reset() {
+ core_util_critical_section_enter();
+ _head = 0;
+ _tail = 0;
+ _full = false;
+ core_util_critical_section_exit();
+ }
+
+private:
+ T _pool[BufferSize];
+ volatile CounterType _head;
+ volatile CounterType _tail;
+ volatile bool _full;
+};
+
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/DigitalIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/DigitalIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALIN_H
+#define MBED_DIGITALIN_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A digital input, used for reading the state of a pin
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Flash an LED while a DigitalIn is true
+ *
+ * #include "mbed.h"
+ *
+ * DigitalIn enable(p5);
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * if(enable) {
+ * led = !led;
+ * }
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalIn {
+
+public:
+ /** Create a DigitalIn connected to the specified pin
+ *
+ * @param pin DigitalIn pin to connect to
+ */
+ DigitalIn(PinName pin) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_in(&gpio, pin);
+ }
+
+ /** Create a DigitalIn connected to the specified pin
+ *
+ * @param pin DigitalIn pin to connect to
+ * @param mode the initial mode of the pin
+ */
+ DigitalIn(PinName pin, PinMode mode) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_in_ex(&gpio, pin, mode);
+ }
+ /** Read the input, represented as 0 or 1 (int)
+ *
+ * @returns
+ * An integer representing the state of the input pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ // Thread safe / atomic HAL call
+ return gpio_read(&gpio);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ core_util_critical_section_enter();
+ gpio_mode(&gpio, pull);
+ core_util_critical_section_exit();
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ // Thread safe / atomic HAL call
+ return gpio_is_connected(&gpio);
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator int() {
+ // Underlying read is thread safe
+ return read();
+ }
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/DigitalInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/DigitalInOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,140 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALINOUT_H
+#define MBED_DIGITALINOUT_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A digital input/output, used for setting or reading a bi-directional pin
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class DigitalInOut {
+
+public:
+ /** Create a DigitalInOut connected to the specified pin
+ *
+ * @param pin DigitalInOut pin to connect to
+ */
+ DigitalInOut(PinName pin) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_in(&gpio, pin);
+ }
+
+ /** Create a DigitalInOut connected to the specified pin
+ *
+ * @param pin DigitalInOut pin to connect to
+ * @param direction the initial direction of the pin
+ * @param mode the initial mode of the pin
+ * @param value the initial value of the pin if is an output
+ */
+ DigitalInOut(PinName pin, PinDirection direction, PinMode mode, int value) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_inout(&gpio, pin, direction, mode, value);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ // Thread safe / atomic HAL call
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin if it is an output,
+ * or read the input if set as an input
+ */
+ int read() {
+ // Thread safe / atomic HAL call
+ return gpio_read(&gpio);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ core_util_critical_section_enter();
+ gpio_dir(&gpio, PIN_OUTPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ core_util_critical_section_enter();
+ gpio_dir(&gpio, PIN_INPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ core_util_critical_section_enter();
+ gpio_mode(&gpio, pull);
+ core_util_critical_section_exit();
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ // Thread safe / atomic HAL call
+ return gpio_is_connected(&gpio);
+ }
+
+ /** A shorthand for write()
+ */
+ DigitalInOut& operator= (int value) {
+ // Underlying write is thread safe
+ write(value);
+ return *this;
+ }
+
+ DigitalInOut& operator= (DigitalInOut& rhs) {
+ core_util_critical_section_enter();
+ write(rhs.read());
+ core_util_critical_section_exit();
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ // Underlying call is thread safe
+ return read();
+ }
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/DigitalOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/DigitalOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,126 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALOUT_H
+#define MBED_DIGITALOUT_H
+
+#include "platform.h"
+#include "gpio_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A digital output, used for setting the state of a pin
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Toggle a LED
+ * #include "mbed.h"
+ *
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = !led;
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalOut {
+
+public:
+ /** Create a DigitalOut connected to the specified pin
+ *
+ * @param pin DigitalOut pin to connect to
+ */
+ DigitalOut(PinName pin) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_out(&gpio, pin);
+ }
+
+ /** Create a DigitalOut connected to the specified pin
+ *
+ * @param pin DigitalOut pin to connect to
+ * @param value the initial pin value
+ */
+ DigitalOut(PinName pin, int value) : gpio() {
+ // No lock needed in the constructor
+ gpio_init_out_ex(&gpio, pin, value);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ // Thread safe / atomic HAL call
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ // Thread safe / atomic HAL call
+ return gpio_read(&gpio);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ // Thread safe / atomic HAL call
+ return gpio_is_connected(&gpio);
+ }
+
+ /** A shorthand for write()
+ */
+ DigitalOut& operator= (int value) {
+ // Underlying write is thread safe
+ write(value);
+ return *this;
+ }
+
+ DigitalOut& operator= (DigitalOut& rhs) {
+ core_util_critical_section_enter();
+ write(rhs.read());
+ core_util_critical_section_exit();
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ // Underlying call is thread safe
+ return read();
+ }
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/DirHandle.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/DirHandle.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,120 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIRHANDLE_H
+#define MBED_DIRHANDLE_H
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define NAME_MAX 255
+typedef int mode_t;
+
+#else
+# include <sys/syslimits.h>
+#endif
+
+#include "FileHandle.h"
+
+struct dirent {
+ char d_name[NAME_MAX+1];
+};
+
+namespace mbed {
+
+/** Represents a directory stream. Objects of this type are returned
+ * by a FileSystemLike's opendir method. Implementations must define
+ * at least closedir, readdir and rewinddir.
+ *
+ * If a FileSystemLike class defines the opendir method, then the
+ * directories of an object of that type can be accessed by
+ * DIR *d = opendir("/example/directory") (or opendir("/example")
+ * to open the root of the filesystem), and then using readdir(d) etc.
+ *
+ * The root directory is considered to contain all FileLike and
+ * FileSystemLike objects, so the DIR* returned by opendir("/") will
+ * reflect this.
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class DirHandle {
+
+public:
+ /** Closes the directory.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on error.
+ */
+ virtual int closedir()=0;
+
+ /** Return the directory entry at the current position, and
+ * advances the position to the next entry.
+ *
+ * @returns
+ * A pointer to a dirent structure representing the
+ * directory entry at the current position, or NULL on reaching
+ * end of directory or error.
+ */
+ virtual struct dirent *readdir()=0;
+
+ /** Resets the position to the beginning of the directory.
+ */
+ virtual void rewinddir()=0;
+
+ /** Returns the current position of the DirHandle.
+ *
+ * @returns
+ * the current position,
+ * -1 on error.
+ */
+ virtual off_t telldir() { return -1; }
+
+ /** Sets the position of the DirHandle.
+ *
+ * @param location The location to seek to. Must be a value returned by telldir.
+ */
+ virtual void seekdir(off_t location) { (void)location;}
+
+ virtual ~DirHandle() {}
+
+protected:
+
+ /** Acquire exclusive access to this object.
+ */
+ virtual void lock() {
+ // Stub
+ }
+
+ /** Release exclusive access to this object.
+ */
+ virtual void unlock() {
+ // Stub
+ }
+};
+
+} // namespace mbed
+
+typedef mbed::DirHandle DIR;
+
+extern "C" {
+ DIR *opendir(const char*);
+ struct dirent *readdir(DIR *);
+ int closedir(DIR*);
+ void rewinddir(DIR*);
+ long telldir(DIR*);
+ void seekdir(DIR*, long);
+ int mkdir(const char *name, mode_t n);
+};
+
+#endif /* MBED_DIRHANDLE_H */
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/Ethernet.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/Ethernet.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,172 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_H
+#define MBED_ETHERNET_H
+
+#include "platform.h"
+
+#if DEVICE_ETHERNET
+
+namespace mbed {
+
+/** An ethernet interface, to use with the ethernet pins.
+ *
+ * @Note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * // Read destination and source from every ethernet packet
+ *
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * char buf[0x600];
+ *
+ * while(1) {
+ * int size = eth.receive();
+ * if(size > 0) {
+ * eth.read(buf, size);
+ * printf("Destination: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ * printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
+ * }
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class Ethernet {
+
+public:
+
+ /** Initialise the ethernet interface.
+ */
+ Ethernet();
+
+ /** Powers the hardware down.
+ */
+ virtual ~Ethernet();
+
+ enum Mode {
+ AutoNegotiate,
+ HalfDuplex10,
+ FullDuplex10,
+ HalfDuplex100,
+ FullDuplex100
+ };
+
+ /** Writes into an outgoing ethernet packet.
+ *
+ * It will append size bytes of data to the previously written bytes.
+ *
+ * @param data An array to write.
+ * @param size The size of data.
+ *
+ * @returns
+ * The number of written bytes.
+ */
+ int write(const char *data, int size);
+
+ /** Send an outgoing ethernet packet.
+ *
+ * After filling in the data in an ethernet packet it must be send.
+ * Send will provide a new packet to write to.
+ *
+ * @returns
+ * 0 if the sending was failed,
+ * or the size of the packet successfully sent.
+ */
+ int send();
+
+ /** Recevies an arrived ethernet packet.
+ *
+ * Receiving an ethernet packet will drop the last received ethernet packet
+ * and make a new ethernet packet ready to read.
+ * If no ethernet packet is arrived it will return 0.
+ *
+ * @returns
+ * 0 if no ethernet packet is arrived,
+ * or the size of the arrived packet.
+ */
+ int receive();
+
+ /** Read from an recevied ethernet packet.
+ *
+ * After receive returnd a number bigger than 0it is
+ * possible to read bytes from this packet.
+ * Read will write up to size bytes into data.
+ *
+ * It is possible to use read multible times.
+ * Each time read will start reading after the last read byte before.
+ *
+ * @returns
+ * The number of byte read.
+ */
+ int read(char *data, int size);
+
+ /** Gives the ethernet address of the mbed.
+ *
+ * @param mac Must be a pointer to a 6 byte char array to copy the ethernet address in.
+ */
+ void address(char *mac);
+
+ /** Returns if an ethernet link is pressent or not. It takes a wile after Ethernet initializion to show up.
+ *
+ * @returns
+ * 0 if no ethernet link is pressent,
+ * 1 if an ethernet link is pressent.
+ *
+ * Example:
+ * @code
+ * // Using the Ethernet link function
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * wait(1); // Needed after startup.
+ * if (eth.link()) {
+ * printf("online\n");
+ * } else {
+ * printf("offline\n");
+ * }
+ * }
+ * @endcode
+ */
+ int link();
+
+ /** Sets the speed and duplex parameters of an ethernet link
+ *
+ * - AutoNegotiate Auto negotiate speed and duplex
+ * - HalfDuplex10 10 Mbit, half duplex
+ * - FullDuplex10 10 Mbit, full duplex
+ * - HalfDuplex100 100 Mbit, half duplex
+ * - FullDuplex100 100 Mbit, full duplex
+ *
+ * @param mode the speed and duplex mode to set the link to:
+ */
+ void set_link(Mode mode);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/FileBase.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/FileBase.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEBASE_H
+#define MBED_FILEBASE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define O_RDONLY 0
+# define O_WRONLY 1
+# define O_RDWR 2
+# define O_CREAT 0x0200
+# define O_TRUNC 0x0400
+# define O_APPEND 0x0008
+
+# define NAME_MAX 255
+
+typedef int mode_t;
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/fcntl.h>
+# include <sys/types.h>
+# include <sys/syslimits.h>
+#endif
+
+#include "platform.h"
+#include "SingletonPtr.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+typedef enum {
+ FilePathType,
+ FileSystemPathType
+} PathType;
+
+class FileBase {
+public:
+ FileBase(const char *name, PathType t);
+
+ virtual ~FileBase();
+
+ const char* getName(void);
+ PathType getPathType(void);
+
+ static FileBase *lookup(const char *name, unsigned int len);
+
+ static FileBase *get(int n);
+
+ /* disallow copy constructor and assignment operators */
+private:
+ static FileBase *_head;
+ static SingletonPtr<PlatformMutex> _mutex;
+
+ FileBase *_next;
+ const char * const _name;
+ const PathType _path_type;
+ FileBase(const FileBase&);
+ FileBase & operator = (const FileBase&);
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/FileHandle.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/FileHandle.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,140 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEHANDLE_H
+#define MBED_FILEHANDLE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/types.h>
+#endif
+
+namespace mbed {
+
+/** An OO equivalent of the internal FILEHANDLE variable
+ * and associated _sys_* functions.
+ *
+ * FileHandle is an abstract class, needing at least sys_write and
+ * sys_read to be implmented for a simple interactive device.
+ *
+ * No one ever directly tals to/instanciates a FileHandle - it gets
+ * created by FileSystem, and wrapped up by stdio.
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class FileHandle {
+
+public:
+ /** Write the contents of a buffer to the file
+ *
+ * @param buffer the buffer to write from
+ * @param length the number of characters to write
+ *
+ * @returns
+ * The number of characters written (possibly 0) on success, -1 on error.
+ */
+ virtual ssize_t write(const void* buffer, size_t length) = 0;
+
+ /** Close the file
+ *
+ * @returns
+ * Zero on success, -1 on error.
+ */
+ virtual int close() = 0;
+
+ /** Function read
+ * Reads the contents of the file into a buffer
+ *
+ * @param buffer the buffer to read in to
+ * @param length the number of characters to read
+ *
+ * @returns
+ * The number of characters read (zero at end of file) on success, -1 on error.
+ */
+ virtual ssize_t read(void* buffer, size_t length) = 0;
+
+ /** Check if the handle is for a interactive terminal device.
+ * If so, line buffered behaviour is used by default
+ *
+ * @returns
+ * 1 if it is a terminal,
+ * 0 otherwise
+ */
+ virtual int isatty() = 0;
+
+ /** Move the file position to a given offset from a given location.
+ *
+ * @param offset The offset from whence to move to
+ * @param whence SEEK_SET for the start of the file, SEEK_CUR for the
+ * current file position, or SEEK_END for the end of the file.
+ *
+ * @returns
+ * new file position on success,
+ * -1 on failure or unsupported
+ */
+ virtual off_t lseek(off_t offset, int whence) = 0;
+
+ /** Flush any buffers associated with the FileHandle, ensuring it
+ * is up to date on disk
+ *
+ * @returns
+ * 0 on success or un-needed,
+ * -1 on error
+ */
+ virtual int fsync() = 0;
+
+ virtual off_t flen() {
+ lock();
+ /* remember our current position */
+ off_t pos = lseek(0, SEEK_CUR);
+ if(pos == -1) {
+ unlock();
+ return -1;
+ }
+ /* seek to the end to get the file length */
+ off_t res = lseek(0, SEEK_END);
+ /* return to our old position */
+ lseek(pos, SEEK_SET);
+ unlock();
+ return res;
+ }
+
+ virtual ~FileHandle();
+
+protected:
+
+ /** Acquire exclusive access to this object.
+ */
+ virtual void lock() {
+ // Stub
+ }
+
+ /** Release exclusive access to this object.
+ */
+ virtual void unlock() {
+ // Stub
+ }
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/FileLike.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/FileLike.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,47 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILELIKE_H
+#define MBED_FILELIKE_H
+
+#include "FileBase.h"
+#include "FileHandle.h"
+
+namespace mbed {
+
+/* Class FileLike
+ * A file-like object is one that can be opened with fopen by
+ * fopen("/name", mode). It is intersection of the classes Base and
+ * FileHandle.
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class FileLike : public FileHandle, public FileBase {
+
+public:
+ /* Constructor FileLike
+ *
+ * Variables
+ * name - The name to use to open the file.
+ */
+ FileLike(const char *name);
+
+ virtual ~FileLike();
+
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/FilePath.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/FilePath.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEPATH_H
+#define MBED_FILEPATH_H
+
+#include "platform.h"
+
+#include "FileSystemLike.h"
+#include "FileLike.h"
+
+namespace mbed {
+
+class FilePath {
+public:
+ FilePath(const char* file_path);
+
+ const char* fileName(void);
+
+ bool isFileSystem(void);
+ FileSystemLike* fileSystem(void);
+
+ bool isFile(void);
+ FileLike* file(void);
+ bool exists(void);
+
+private:
+ const char* file_name;
+ FileBase* fb;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/FileSystemLike.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/FileSystemLike.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,106 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILESYSTEMLIKE_H
+#define MBED_FILESYSTEMLIKE_H
+
+#include "platform.h"
+
+#include "FileBase.h"
+#include "FileHandle.h"
+#include "DirHandle.h"
+
+namespace mbed {
+
+/** A filesystem-like object is one that can be used to open files
+ * though it by fopen("/name/filename", mode)
+ *
+ * Implementations must define at least open (the default definitions
+ * of the rest of the functions just return error values).
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class FileSystemLike : public FileBase {
+
+public:
+ /** FileSystemLike constructor
+ *
+ * @param name The name to use for the filesystem.
+ */
+ FileSystemLike(const char *name);
+
+ virtual ~FileSystemLike();
+
+ static DirHandle *opendir();
+ friend class BaseDirHandle;
+
+ /** Opens a file from the filesystem
+ *
+ * @param filename The name of the file to open.
+ * @param flags One of O_RDONLY, O_WRONLY, or O_RDWR, OR'd with
+ * zero or more of O_CREAT, O_TRUNC, or O_APPEND.
+ *
+ * @returns
+ * A pointer to a FileHandle object representing the
+ * file on success, or NULL on failure.
+ */
+ virtual FileHandle *open(const char *filename, int flags) = 0;
+
+ /** Remove a file from the filesystem.
+ *
+ * @param filename the name of the file to remove.
+ * @param returns 0 on success, -1 on failure.
+ */
+ virtual int remove(const char *filename) { (void) filename; return -1; };
+
+ /** Rename a file in the filesystem.
+ *
+ * @param oldname the name of the file to rename.
+ * @param newname the name to rename it to.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int rename(const char *oldname, const char *newname) { (void) oldname, (void) newname; return -1; };
+
+ /** Opens a directory in the filesystem and returns a DirHandle
+ * representing the directory stream.
+ *
+ * @param name The name of the directory to open.
+ *
+ * @returns
+ * A DirHandle representing the directory stream, or
+ * NULL on failure.
+ */
+ virtual DirHandle *opendir(const char *name) { (void) name; return NULL; };
+
+ /** Creates a directory in the filesystem.
+ *
+ * @param name The name of the directory to create.
+ * @param mode The permissions to create the directory with.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int mkdir(const char *name, mode_t mode) { (void) name, (void) mode; return -1; }
+
+ // TODO other filesystem functions (mkdir, rm, rn, ls etc)
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/FunctionPointer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/FunctionPointer.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,72 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FUNCTIONPOINTER_H
+#define MBED_FUNCTIONPOINTER_H
+
+#include "Callback.h"
+#include "toolchain.h"
+#include <string.h>
+#include <stdint.h>
+
+namespace mbed {
+
+
+// Declarations for backwards compatibility
+// To be foward compatible, code should adopt the Callback class
+template <typename R, typename A1>
+class FunctionPointerArg1 : public Callback<R(A1)> {
+public:
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "FunctionPointerArg1<R, A> has been replaced by Callback<R(A)>")
+ FunctionPointerArg1(R (*function)(A1) = 0)
+ : Callback<R(A1)>(function) {}
+
+ template<typename T>
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "FunctionPointerArg1<R, A> has been replaced by Callback<R(A)>")
+ FunctionPointerArg1(T *object, R (T::*member)(A1))
+ : Callback<R(A1)>(object, member) {}
+
+ R (*get_function())(A1) {
+ return *reinterpret_cast<R (**)(A1)>(this);
+ }
+};
+
+template <typename R>
+class FunctionPointerArg1<R, void> : public Callback<R()> {
+public:
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "FunctionPointer has been replaced by Callback<void()>")
+ FunctionPointerArg1(R (*function)() = 0)
+ : Callback<R()>(function) {}
+
+ template<typename T>
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "FunctionPointer has been replaced by Callback<void()>")
+ FunctionPointerArg1(T *object, R (T::*member)())
+ : Callback<R()>(object, member) {}
+
+ R (*get_function())() {
+ return *reinterpret_cast<R (**)()>(this);
+ }
+};
+
+typedef FunctionPointerArg1<void, void> FunctionPointer;
+
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/I2C.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/I2C.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,193 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_H
+#define MBED_I2C_H
+
+#include "platform.h"
+
+#if DEVICE_I2C
+
+#include "i2c_api.h"
+#include "SingletonPtr.h"
+#include "PlatformMutex.h"
+
+#if DEVICE_I2C_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#include "FunctionPointer.h"
+#endif
+
+namespace mbed {
+
+/** An I2C Master, used for communicating with I2C slave devices
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * // Read from I2C slave at address 0x62
+ *
+ * #include "mbed.h"
+ *
+ * I2C i2c(p28, p27);
+ *
+ * int main() {
+ * int address = 0x62;
+ * char data[2];
+ * i2c.read(address, data, 2);
+ * }
+ * @endcode
+ */
+class I2C {
+
+public:
+ enum RxStatus {
+ NoData,
+ MasterGeneralCall,
+ MasterWrite,
+ MasterRead
+ };
+
+ enum Acknowledge {
+ NoACK = 0,
+ ACK = 1
+ };
+
+ /** Create an I2C Master interface, connected to the specified pins
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2C(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Read from an I2C slave
+ *
+ * Performs a complete read transaction. The bottom bit of
+ * the address is forced to 1 to indicate a read.
+ *
+ * @param address 8-bit I2C slave address [ addr | 1 ]
+ * @param data Pointer to the byte-array to read data in to
+ * @param length Number of bytes to read
+ * @param repeated Repeated start, true - don't send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int read(int address, char *data, int length, bool repeated = false);
+
+ /** Read a single byte from the I2C bus
+ *
+ * @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
+ *
+ * @returns
+ * the byte read
+ */
+ int read(int ack);
+
+ /** Write to an I2C slave
+ *
+ * Performs a complete write transaction. The bottom bit of
+ * the address is forced to 0 to indicate a write.
+ *
+ * @param address 8-bit I2C slave address [ addr | 0 ]
+ * @param data Pointer to the byte-array data to send
+ * @param length Number of bytes to send
+ * @param repeated Repeated start, true - do not send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int write(int address, const char *data, int length, bool repeated = false);
+
+ /** Write single byte out on the I2C bus
+ *
+ * @param data data to write out on bus
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Creates a start condition on the I2C bus
+ */
+
+ void start(void);
+
+ /** Creates a stop condition on the I2C bus
+ */
+ void stop(void);
+
+ /** Acquire exclusive access to this I2C bus
+ */
+ virtual void lock(void);
+
+ /** Release exclusive access to this I2C bus
+ */
+ virtual void unlock(void);
+
+ virtual ~I2C() {
+ // Do nothing
+ }
+
+#if DEVICE_I2C_ASYNCH
+
+ /** Start non-blocking I2C transfer.
+ *
+ * @param address 8/10 bit I2c slave address
+ * @param tx_buffer The TX buffer with data to be transfered
+ * @param tx_length The length of TX buffer in bytes
+ * @param rx_buffer The RX buffer which is used for received data
+ * @param rx_length The length of RX buffer in bytes
+ * @param event The logical OR of events to modify
+ * @param callback The event callback function
+ * @param repeated Repeated start, true - do not send stop at end
+ * @return Zero if the transfer has started, or -1 if I2C peripheral is busy
+ */
+ int transfer(int address, const char *tx_buffer, int tx_length, char *rx_buffer, int rx_length, const event_callback_t& callback, int event = I2C_EVENT_TRANSFER_COMPLETE, bool repeated = false);
+
+ /** Abort the on-going I2C transfer
+ */
+ void abort_transfer();
+protected:
+ void irq_handler_asynch(void);
+ event_callback_t _callback;
+ CThunk<I2C> _irq;
+ DMAUsage _usage;
+#endif
+
+protected:
+ void aquire();
+
+ i2c_t _i2c;
+ static I2C *_owner;
+ int _hz;
+ static SingletonPtr<PlatformMutex> _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/I2CSlave.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/I2CSlave.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,156 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_SLAVE_H
+#define MBED_I2C_SLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_I2CSLAVE
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Slave, used for communicating with an I2C Master device
+ *
+ * @Note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * // Simple I2C responder
+ * #include <mbed.h>
+ *
+ * I2CSlave slave(p9, p10);
+ *
+ * int main() {
+ * char buf[10];
+ * char msg[] = "Slave!";
+ *
+ * slave.address(0xA0);
+ * while (1) {
+ * int i = slave.receive();
+ * switch (i) {
+ * case I2CSlave::ReadAddressed:
+ * slave.write(msg, strlen(msg) + 1); // Includes null char
+ * break;
+ * case I2CSlave::WriteGeneral:
+ * slave.read(buf, 10);
+ * printf("Read G: %s\n", buf);
+ * break;
+ * case I2CSlave::WriteAddressed:
+ * slave.read(buf, 10);
+ * printf("Read A: %s\n", buf);
+ * break;
+ * }
+ * for(int i = 0; i < 10; i++) buf[i] = 0; // Clear buffer
+ * }
+ * }
+ * @endcode
+ */
+class I2CSlave {
+
+public:
+ enum RxStatus {
+ NoData = 0,
+ ReadAddressed = 1,
+ WriteGeneral = 2,
+ WriteAddressed = 3
+ };
+
+ /** Create an I2C Slave interface, connected to the specified pins.
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2CSlave(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Checks to see if this I2C Slave has been addressed.
+ *
+ * @returns
+ * A status indicating if the device has been addressed, and how
+ * - NoData - the slave has not been addressed
+ * - ReadAddressed - the master has requested a read from this slave
+ * - WriteAddressed - the master is writing to this slave
+ * - WriteGeneral - the master is writing to all slave
+ */
+ int receive(void);
+
+ /** Read from an I2C master.
+ *
+ * @param data pointer to the byte array to read data in to
+ * @param length maximum number of bytes to read
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int read(char *data, int length);
+
+ /** Read a single byte from an I2C master.
+ *
+ * @returns
+ * the byte read
+ */
+ int read(void);
+
+ /** Write to an I2C master.
+ *
+ * @param data pointer to the byte array to be transmitted
+ * @param length the number of bytes to transmite
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int write(const char *data, int length);
+
+ /** Write a single byte to an I2C master.
+ *
+ * @data the byte to write
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Sets the I2C slave address.
+ *
+ * @param address The address to set for the slave (ignoring the least
+ * signifcant bit). If set to 0, the slave will only respond to the
+ * general call address.
+ */
+ void address(int address);
+
+ /** Reset the I2C slave back into the known ready receiving state.
+ */
+ void stop(void);
+
+protected:
+ i2c_t _i2c;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/InterruptIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/InterruptIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,147 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERRUPTIN_H
+#define MBED_INTERRUPTIN_H
+
+#include "platform.h"
+
+#if DEVICE_INTERRUPTIN
+
+#include "gpio_api.h"
+#include "gpio_irq_api.h"
+#include "Callback.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A digital interrupt input, used to call a function on a rising or falling edge
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Flash an LED while waiting for events
+ *
+ * #include "mbed.h"
+ *
+ * InterruptIn event(p16);
+ * DigitalOut led(LED1);
+ *
+ * void trigger() {
+ * printf("triggered!\n");
+ * }
+ *
+ * int main() {
+ * event.rise(&trigger);
+ * while(1) {
+ * led = !led;
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class InterruptIn {
+
+public:
+
+ /** Create an InterruptIn connected to the specified pin
+ *
+ * @param pin InterruptIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ InterruptIn(PinName pin);
+ virtual ~InterruptIn();
+
+ /** Read the input, represented as 0 or 1 (int)
+ *
+ * @returns
+ * An integer representing the state of the input pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read();
+
+ /** An operator shorthand for read()
+ */
+ operator int();
+
+
+ /** Attach a function to call when a rising edge occurs on the input
+ *
+ * @param func A pointer to a void function, or 0 to set as none
+ */
+ void rise(Callback<void()> func);
+
+ /** Attach a member function to call when a rising edge occurs on the input
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ */
+ template<typename T, typename M>
+ void rise(T *obj, M method) {
+ core_util_critical_section_enter();
+ rise(Callback<void()>(obj, method));
+ core_util_critical_section_exit();
+ }
+
+ /** Attach a function to call when a falling edge occurs on the input
+ *
+ * @param func A pointer to a void function, or 0 to set as none
+ */
+ void fall(Callback<void()> func);
+
+ /** Attach a member function to call when a falling edge occurs on the input
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ */
+ template<typename T, typename M>
+ void fall(T *obj, M method) {
+ core_util_critical_section_enter();
+ fall(Callback<void()>(obj, method));
+ core_util_critical_section_exit();
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Enable IRQ. This method depends on hw implementation, might enable one
+ * port interrupts. For further information, check gpio_irq_enable().
+ */
+ void enable_irq();
+
+ /** Disable IRQ. This method depends on hw implementation, might disable one
+ * port interrupts. For further information, check gpio_irq_disable().
+ */
+ void disable_irq();
+
+ static void _irq_handler(uint32_t id, gpio_irq_event event);
+
+protected:
+ gpio_t gpio;
+ gpio_irq_t gpio_irq;
+
+ Callback<void()> _rise;
+ Callback<void()> _fall;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/InterruptManager.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/InterruptManager.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,156 @@
+#ifndef MBED_INTERRUPTMANAGER_H
+#define MBED_INTERRUPTMANAGER_H
+
+#include "cmsis.h"
+#include "CallChain.h"
+#include "PlatformMutex.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Use this singleton if you need to chain interrupt handlers.
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example (for LPC1768):
+ * @code
+ * #include "InterruptManager.h"
+ * #include "mbed.h"
+ *
+ * Ticker flipper;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * void flip(void) {
+ * led1 = !led1;
+ * }
+ *
+ * void handler(void) {
+ * led2 = !led1;
+ * }
+ *
+ * int main() {
+ * led1 = led2 = 0;
+ * flipper.attach(&flip, 1.0);
+ * InterruptManager::get()->add_handler(handler, TIMER3_IRQn);
+ * }
+ * @endcode
+ */
+class InterruptManager {
+public:
+ /** Return the only instance of this class
+ */
+ static InterruptManager* get();
+
+ /** Destroy the current instance of the interrupt manager
+ */
+ static void destroy();
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler(void (*function)(void), IRQn_Type irq) {
+ // Underlying call is thread safe
+ return add_common(function, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler_front(void (*function)(void), IRQn_Type irq) {
+ // Underlying call is thread safe
+ return add_common(function, irq, true);
+ }
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ // Underlying call is thread safe
+ return add_common(tptr, mptr, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler_front(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ // Underlying call is thread safe
+ return add_common(tptr, mptr, irq, true);
+ }
+
+ /** Remove a handler from an interrupt
+ *
+ * @param handler the function object for the handler to remove
+ * @param irq the interrupt number
+ *
+ * @returns
+ * true if the handler was found and removed, false otherwise
+ */
+ bool remove_handler(pFunctionPointer_t handler, IRQn_Type irq);
+
+private:
+ InterruptManager();
+ ~InterruptManager();
+
+ void lock();
+ void unlock();
+
+ // We declare the copy contructor and the assignment operator, but we don't
+ // implement them. This way, if someone tries to copy/assign our instance,
+ // he will get an error at compile time.
+ InterruptManager(const InterruptManager&);
+ InterruptManager& operator =(const InterruptManager&);
+
+ template<typename T>
+ pFunctionPointer_t add_common(T *tptr, void (T::*mptr)(void), IRQn_Type irq, bool front=false) {
+ _mutex.lock();
+ int irq_pos = get_irq_index(irq);
+ bool change = must_replace_vector(irq);
+
+ pFunctionPointer_t pf = front ? _chains[irq_pos]->add_front(tptr, mptr) : _chains[irq_pos]->add(tptr, mptr);
+ if (change)
+ NVIC_SetVector(irq, (uint32_t)&InterruptManager::static_irq_helper);
+ _mutex.unlock();
+ return pf;
+ }
+
+ pFunctionPointer_t add_common(void (*function)(void), IRQn_Type irq, bool front=false);
+ bool must_replace_vector(IRQn_Type irq);
+ int get_irq_index(IRQn_Type irq);
+ void irq_helper();
+ void add_helper(void (*function)(void), IRQn_Type irq, bool front=false);
+ static void static_irq_helper();
+
+ CallChain* _chains[NVIC_NUM_VECTORS];
+ static InterruptManager* _instance;
+ PlatformMutex _mutex;
+};
+
+} // namespace mbed
+
+#endif
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/LocalFileSystem.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/LocalFileSystem.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOCALFILESYSTEM_H
+#define MBED_LOCALFILESYSTEM_H
+
+#include "platform.h"
+
+#if DEVICE_LOCALFILESYSTEM
+
+#include "FileSystemLike.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+FILEHANDLE local_file_open(const char* name, int flags);
+
+class LocalFileHandle : public FileHandle {
+
+public:
+ LocalFileHandle(FILEHANDLE fh);
+
+ virtual int close();
+
+ virtual ssize_t write(const void *buffer, size_t length);
+
+ virtual ssize_t read(void *buffer, size_t length);
+
+ virtual int isatty();
+
+ virtual off_t lseek(off_t position, int whence);
+
+ virtual int fsync();
+
+ virtual off_t flen();
+
+protected:
+ virtual void lock();
+ virtual void unlock();
+ FILEHANDLE _fh;
+ int pos;
+ PlatformMutex _mutex;
+};
+
+/** A filesystem for accessing the local mbed Microcontroller USB disk drive
+ *
+ * This allows programs to read and write files on the same disk drive that is used to program the
+ * mbed Microcontroller. Once created, the standard C file access functions are used to open,
+ * read and write files.
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * LocalFileSystem local("local"); // Create the local filesystem under the name "local"
+ *
+ * int main() {
+ * FILE *fp = fopen("/local/out.txt", "w"); // Open "out.txt" on the local file system for writing
+ * fprintf(fp, "Hello World!");
+ * fclose(fp);
+ * remove("/local/out.txt"); // Removes the file "out.txt" from the local file system
+ *
+ * DIR *d = opendir("/local"); // Opens the root directory of the local file system
+ * struct dirent *p;
+ * while((p = readdir(d)) != NULL) { // Print the names of the files in the local file system
+ * printf("%s\n", p->d_name); // to stdout.
+ * }
+ * closedir(d);
+ * }
+ * @endcode
+ *
+ * @note
+ * If the microcontroller program makes an access to the local drive, it will be marked as "removed"
+ * on the Host computer. This means it is no longer accessible from the Host Computer.
+ *
+ * The drive will only re-appear when the microcontroller program exists. Note that if the program does
+ * not exit, you will need to hold down reset on the mbed Microcontroller to be able to see the drive again!
+ */
+class LocalFileSystem : public FileSystemLike {
+ // No modifiable state
+
+public:
+ LocalFileSystem(const char* n) : FileSystemLike(n) {
+
+ }
+
+ virtual FileHandle *open(const char* name, int flags);
+ virtual int remove(const char *filename);
+ virtual DirHandle *opendir(const char *name);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/LowPowerTicker.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/LowPowerTicker.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTICKER_H
+#define MBED_LOWPOWERTICKER_H
+
+#include "platform.h"
+#include "Ticker.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+
+namespace mbed {
+
+/** Low Power Ticker
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class LowPowerTicker : public Ticker {
+
+public:
+ LowPowerTicker() : Ticker(get_lp_ticker_data()) {
+ }
+
+ virtual ~LowPowerTicker() {
+ }
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/LowPowerTimeout.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/LowPowerTimeout.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTIMEOUT_H
+#define MBED_LOWPOWERTIMEOUT_H
+
+#include "platform.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+#include "LowPowerTicker.h"
+
+namespace mbed {
+
+/** Low Power Timout
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class LowPowerTimeout : public LowPowerTicker {
+
+private:
+ virtual void handler(void) {
+ _function.call();
+ }
+};
+
+}
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/LowPowerTimer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/LowPowerTimer.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTIMER_H
+#define MBED_LOWPOWERTIMER_H
+
+#include "platform.h"
+#include "Timer.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+
+namespace mbed {
+
+/** Low power timer
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class LowPowerTimer : public Timer {
+
+public:
+ LowPowerTimer() : Timer(get_lp_ticker_data()) {
+ }
+
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/PlatformMutex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/PlatformMutex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef PLATFORM_MUTEX_H
+#define PLATFORM_MUTEX_H
+
+#ifdef MBED_CONF_RTOS_PRESENT
+#include "Mutex.h"
+typedef rtos::Mutex PlatformMutex;
+#else
+/** A stub mutex for when an RTOS is not present
+*/
+class PlatformMutex {
+public:
+ PlatformMutex() {
+ // Stub
+
+ }
+ ~PlatformMutex() {
+ // Stub
+ }
+
+ void lock() {
+ // Do nothing
+ }
+
+ void unlock() {
+ // Do nothing
+ }
+};
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/PortIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/PortIn.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,100 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTIN_H
+#define MBED_PORTIN_H
+
+#include "platform.h"
+
+#if DEVICE_PORTIN
+
+#include "port_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A multiple pin digital input
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Switch on an LED if any of mbed pins 21-26 is high
+ *
+ * #include "mbed.h"
+ *
+ * PortIn p(Port2, 0x0000003F); // p21-p26
+ * DigitalOut ind(LED4);
+ *
+ * int main() {
+ * while(1) {
+ * int pins = p.read();
+ * if(pins) {
+ * ind = 1;
+ * } else {
+ * ind = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class PortIn {
+public:
+
+ /** Create an PortIn, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortIn(PortName port, int mask = 0xFFFFFFFF) {
+ core_util_critical_section_enter();
+ port_init(&_port, port, mask, PIN_INPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ core_util_critical_section_enter();
+ port_mode(&_port, mode);
+ core_util_critical_section_exit();
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/PortInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/PortInOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTINOUT_H
+#define MBED_PORTINOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTINOUT
+
+#include "port_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A multiple pin digital in/out used to set/read multiple bi-directional pins
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+class PortInOut {
+public:
+
+ /** Create an PortInOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortInOut(PortName port, int mask = 0xFFFFFFFF) {
+ core_util_critical_section_enter();
+ port_init(&_port, port, mask, PIN_INPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding port pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ core_util_critical_section_enter();
+ port_dir(&_port, PIN_OUTPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ core_util_critical_section_enter();
+ port_dir(&_port, PIN_INPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ core_util_critical_section_enter();
+ port_mode(&_port, mode);
+ core_util_critical_section_exit();
+ }
+
+ /** A shorthand for write()
+ */
+ PortInOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortInOut& operator= (PortInOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/PortOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/PortOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,109 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTOUT_H
+#define MBED_PORTOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTOUT
+
+#include "port_api.h"
+#include "critical.h"
+
+namespace mbed {
+/** A multiple pin digital out
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Toggle all four LEDs
+ *
+ * #include "mbed.h"
+ *
+ * // LED1 = P1.18 LED2 = P1.20 LED3 = P1.21 LED4 = P1.23
+ * #define LED_MASK 0x00B40000
+ *
+ * PortOut ledport(Port1, LED_MASK);
+ *
+ * int main() {
+ * while(1) {
+ * ledport = LED_MASK;
+ * wait(1);
+ * ledport = 0;
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class PortOut {
+public:
+
+ /** Create an PortOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortOut(PortName port, int mask = 0xFFFFFFFF) {
+ core_util_critical_section_enter();
+ port_init(&_port, port, mask, PIN_OUTPUT);
+ core_util_critical_section_exit();
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding PortOut pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated PortOut pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** A shorthand for write()
+ */
+ PortOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortOut& operator= (PortOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/PwmOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/PwmOut.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,181 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_H
+#define MBED_PWMOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PWMOUT
+#include "pwmout_api.h"
+#include "critical.h"
+
+namespace mbed {
+
+/** A pulse-width modulation digital output
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example
+ * @code
+ * // Fade a led on.
+ * #include "mbed.h"
+ *
+ * PwmOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = led + 0.01;
+ * wait(0.2);
+ * if(led == 1.0) {
+ * led = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ *
+ * @note
+ * On the LPC1768 and LPC2368, the PWMs all share the same
+ * period - if you change the period for one, you change it for all.
+ * Although routines that change the period maintain the duty cycle
+ * for its PWM, all other PWMs will require their duty cycle to be
+ * refreshed.
+ */
+class PwmOut {
+
+public:
+
+ /** Create a PwmOut connected to the specified pin
+ *
+ * @param pin PwmOut pin to connect to
+ */
+ PwmOut(PinName pin) {
+ core_util_critical_section_enter();
+ pwmout_init(&_pwm, pin);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the ouput duty-cycle, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output duty-cycle,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ core_util_critical_section_enter();
+ pwmout_write(&_pwm, value);
+ core_util_critical_section_exit();
+ }
+
+ /** Return the current output duty-cycle setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current duty-cycle being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous <write>.
+ */
+ float read() {
+ core_util_critical_section_enter();
+ float val = pwmout_read(&_pwm);
+ core_util_critical_section_exit();
+ return val;
+ }
+
+ /** Set the PWM period, specified in seconds (float), keeping the duty cycle the same.
+ *
+ * @note
+ * The resolution is currently in microseconds; periods smaller than this
+ * will be set to zero.
+ */
+ void period(float seconds) {
+ core_util_critical_section_enter();
+ pwmout_period(&_pwm, seconds);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM period, specified in milli-seconds (int), keeping the duty cycle the same.
+ */
+ void period_ms(int ms) {
+ core_util_critical_section_enter();
+ pwmout_period_ms(&_pwm, ms);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM period, specified in micro-seconds (int), keeping the duty cycle the same.
+ */
+ void period_us(int us) {
+ core_util_critical_section_enter();
+ pwmout_period_us(&_pwm, us);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM pulsewidth, specified in seconds (float), keeping the period the same.
+ */
+ void pulsewidth(float seconds) {
+ core_util_critical_section_enter();
+ pwmout_pulsewidth(&_pwm, seconds);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM pulsewidth, specified in milli-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_ms(int ms) {
+ core_util_critical_section_enter();
+ pwmout_pulsewidth_ms(&_pwm, ms);
+ core_util_critical_section_exit();
+ }
+
+ /** Set the PWM pulsewidth, specified in micro-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_us(int us) {
+ core_util_critical_section_enter();
+ pwmout_pulsewidth_us(&_pwm, us);
+ core_util_critical_section_exit();
+ }
+
+ /** A operator shorthand for write()
+ */
+ PwmOut& operator= (float value) {
+ // Underlying call is thread safe
+ write(value);
+ return *this;
+ }
+
+ PwmOut& operator= (PwmOut& rhs) {
+ // Underlying call is thread safe
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ // Underlying call is thread safe
+ return read();
+ }
+
+protected:
+ pwmout_t _pwm;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/RawSerial.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/RawSerial.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,102 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RAW_SERIAL_H
+#define MBED_RAW_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ * This is a variation of the Serial class that doesn't use streams,
+ * thus making it safe to use in interrupt handlers with the RTOS.
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * @Note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * // Send a char to the PC
+ *
+ * #include "mbed.h"
+ *
+ * RawSerial pc(USBTX, USBRX);
+ *
+ * int main() {
+ * pc.putc('A');
+ * }
+ * @endcode
+ */
+class RawSerial: public SerialBase {
+
+public:
+ /** Create a RawSerial port, connected to the specified transmit and receive pins
+ *
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ *
+ * @note
+ * Either tx or rx may be specified as NC if unused
+ */
+ RawSerial(PinName tx, PinName rx);
+
+ /** Write a char to the serial port
+ *
+ * @param c The char to write
+ *
+ * @returns The written char or -1 if an error occured
+ */
+ int putc(int c);
+
+ /** Read a char from the serial port
+ *
+ * @returns The char read from the serial port
+ */
+ int getc();
+
+ /** Write a string to the serial port
+ *
+ * @param str The string to write
+ *
+ * @returns 0 if the write succeeds, EOF for error
+ */
+ int puts(const char *str);
+
+ int printf(const char *format, ...);
+
+protected:
+
+ /** Acquire exclusive access to this serial port
+ */
+ virtual void lock(void);
+
+ /** Release exclusive access to this serial port
+ */
+ virtual void unlock(void);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/Ticker.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/Ticker.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,129 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TICKER_H
+#define MBED_TICKER_H
+
+#include "TimerEvent.h"
+#include "Callback.h"
+
+namespace mbed {
+
+/** A Ticker is used to call a function at a recurring interval
+ *
+ * You can use as many seperate Ticker objects as you require.
+ *
+ * @Note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Toggle the blinking led after 5 seconds
+ *
+ * #include "mbed.h"
+ *
+ * Ticker timer;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * int flip = 0;
+ *
+ * void attime() {
+ * flip = !flip;
+ * }
+ *
+ * int main() {
+ * timer.attach(&attime, 5);
+ * while(1) {
+ * if(flip == 0) {
+ * led1 = !led1;
+ * } else {
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class Ticker : public TimerEvent {
+
+public:
+ Ticker() : TimerEvent() {
+ }
+
+ Ticker(const ticker_data_t *data) : TimerEvent(data) {
+ data->interface->init();
+ }
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param func pointer to the function to be called
+ * @param t the time between calls in seconds
+ */
+ void attach(Callback<void()> func, float t) {
+ attach_us(func, t * 1000000.0f);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param t the time between calls in seconds
+ */
+ template<typename T, typename M>
+ void attach(T *obj, M method, float t) {
+ attach(Callback<void()>(obj, method), t);
+ }
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param fptr pointer to the function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ void attach_us(Callback<void()> func, timestamp_t t) {
+ _function.attach(func);
+ setup(t);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ template<typename T, typename M>
+ void attach_us(T *obj, M method, timestamp_t t) {
+ attach_us(Callback<void()>(obj, method), t);
+ }
+
+ virtual ~Ticker() {
+ detach();
+ }
+
+ /** Detach the function
+ */
+ void detach();
+
+protected:
+ void setup(timestamp_t t);
+ virtual void handler();
+
+protected:
+ timestamp_t _delay; /**< Time delay (in microseconds) for re-setting the multi-shot callback. */
+ Callback<void()> _function; /**< Callback. */
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/can_helper.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/can_helper.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_HELPER_H
+#define MBED_CAN_HELPER_H
+
+#if DEVICE_CAN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum CANFormat {
+ CANStandard = 0,
+ CANExtended = 1,
+ CANAny = 2
+};
+typedef enum CANFormat CANFormat;
+
+enum CANType {
+ CANData = 0,
+ CANRemote = 1
+};
+typedef enum CANType CANType;
+
+struct CAN_Message {
+ unsigned int id; // 29 bit identifier
+ unsigned char data[8]; // Data field
+ unsigned char len; // Length of data field in bytes
+ CANFormat format; // 0 - STANDARD, 1- EXTENDED IDENTIFIER
+ CANType type; // 0 - DATA FRAME, 1 - REMOTE FRAME
+};
+typedef struct CAN_Message CAN_Message;
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif
+
+#endif // MBED_CAN_HELPER_H
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/critical.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/critical.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,354 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __MBED_UTIL_CRITICAL_H__
+#define __MBED_UTIL_CRITICAL_H__
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stddef.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/** Determine the current interrupts enabled state
+ *
+ * This function can be called to determine whether or not interrupts are currently enabled.
+ * \note
+ * NOTE:
+ * This function works for both cortex-A and cortex-M, although the underlyng implementation
+ * differs.
+ * @return true if interrupts are enabled, false otherwise
+ */
+bool core_util_are_interrupts_enabled(void);
+
+/** Mark the start of a critical section
+ *
+ * This function should be called to mark the start of a critical section of code.
+ * \note
+ * NOTES:
+ * 1) The use of this style of critical section is targetted at C based implementations.
+ * 2) These critical sections can be nested.
+ * 3) The interrupt enable state on entry to the first critical section (of a nested set, or single
+ * section) will be preserved on exit from the section.
+ * 4) This implementation will currently only work on code running in privileged mode.
+ */
+void core_util_critical_section_enter(void);
+
+/** Mark the end of a critical section
+ *
+ * This function should be called to mark the end of a critical section of code.
+ * \note
+ * NOTES:
+ * 1) The use of this style of critical section is targetted at C based implementations.
+ * 2) These critical sections can be nested.
+ * 3) The interrupt enable state on entry to the first critical section (of a nested set, or single
+ * section) will be preserved on exit from the section.
+ * 4) This implementation will currently only work on code running in privileged mode.
+ */
+void core_util_critical_section_exit(void);
+
+/**
+ * Atomic compare and set. It compares the contents of a memory location to a
+ * given value and, only if they are the same, modifies the contents of that
+ * memory location to a given new value. This is done as a single atomic
+ * operation. The atomicity guarantees that the new value is calculated based on
+ * up-to-date information; if the value had been updated by another thread in
+ * the meantime, the write would fail due to a mismatched expectedCurrentValue.
+ *
+ * Refer to https://en.wikipedia.org/wiki/Compare-and-set [which may redirect
+ * you to the article on compare-and swap].
+ *
+ * @param ptr The target memory location.
+ * @param[in,out] expectedCurrentValue A pointer to some location holding the
+ * expected current value of the data being set atomically.
+ * The computed 'desiredValue' should be a function of this current value.
+ * @Note: This is an in-out parameter. In the
+ * failure case of atomic_cas (where the
+ * destination isn't set), the pointee of expectedCurrentValue is
+ * updated with the current value.
+ * @param[in] desiredValue The new value computed based on '*expectedCurrentValue'.
+ *
+ * @return true if the memory location was atomically
+ * updated with the desired value (after verifying
+ * that it contained the expectedCurrentValue),
+ * false otherwise. In the failure case,
+ * exepctedCurrentValue is updated with the new
+ * value of the target memory location.
+ *
+ * pseudocode:
+ * function cas(p : pointer to int, old : pointer to int, new : int) returns bool {
+ * if *p != *old {
+ * *old = *p
+ * return false
+ * }
+ * *p = new
+ * return true
+ * }
+ *
+ * @Note: In the failure case (where the destination isn't set), the value
+ * pointed to by expectedCurrentValue is still updated with the current value.
+ * This property helps writing concise code for the following incr:
+ *
+ * function incr(p : pointer to int, a : int) returns int {
+ * done = false
+ * value = *p // This fetch operation need not be atomic.
+ * while not done {
+ * done = atomic_cas(p, &value, value + a) // *value gets updated automatically until success
+ * }
+ * return value + a
+ * }
+ */
+bool core_util_atomic_cas_u8(uint8_t *ptr, uint8_t *expectedCurrentValue, uint8_t desiredValue);
+
+/**
+ * Atomic compare and set. It compares the contents of a memory location to a
+ * given value and, only if they are the same, modifies the contents of that
+ * memory location to a given new value. This is done as a single atomic
+ * operation. The atomicity guarantees that the new value is calculated based on
+ * up-to-date information; if the value had been updated by another thread in
+ * the meantime, the write would fail due to a mismatched expectedCurrentValue.
+ *
+ * Refer to https://en.wikipedia.org/wiki/Compare-and-set [which may redirect
+ * you to the article on compare-and swap].
+ *
+ * @param ptr The target memory location.
+ * @param[in,out] expectedCurrentValue A pointer to some location holding the
+ * expected current value of the data being set atomically.
+ * The computed 'desiredValue' should be a function of this current value.
+ * @Note: This is an in-out parameter. In the
+ * failure case of atomic_cas (where the
+ * destination isn't set), the pointee of expectedCurrentValue is
+ * updated with the current value.
+ * @param[in] desiredValue The new value computed based on '*expectedCurrentValue'.
+ *
+ * @return true if the memory location was atomically
+ * updated with the desired value (after verifying
+ * that it contained the expectedCurrentValue),
+ * false otherwise. In the failure case,
+ * exepctedCurrentValue is updated with the new
+ * value of the target memory location.
+ *
+ * pseudocode:
+ * function cas(p : pointer to int, old : pointer to int, new : int) returns bool {
+ * if *p != *old {
+ * *old = *p
+ * return false
+ * }
+ * *p = new
+ * return true
+ * }
+ *
+ * @Note: In the failure case (where the destination isn't set), the value
+ * pointed to by expectedCurrentValue is still updated with the current value.
+ * This property helps writing concise code for the following incr:
+ *
+ * function incr(p : pointer to int, a : int) returns int {
+ * done = false
+ * value = *p // This fetch operation need not be atomic.
+ * while not done {
+ * done = atomic_cas(p, &value, value + a) // *value gets updated automatically until success
+ * }
+ * return value + a
+ * }
+ */
+bool core_util_atomic_cas_u16(uint16_t *ptr, uint16_t *expectedCurrentValue, uint16_t desiredValue);
+
+/**
+ * Atomic compare and set. It compares the contents of a memory location to a
+ * given value and, only if they are the same, modifies the contents of that
+ * memory location to a given new value. This is done as a single atomic
+ * operation. The atomicity guarantees that the new value is calculated based on
+ * up-to-date information; if the value had been updated by another thread in
+ * the meantime, the write would fail due to a mismatched expectedCurrentValue.
+ *
+ * Refer to https://en.wikipedia.org/wiki/Compare-and-set [which may redirect
+ * you to the article on compare-and swap].
+ *
+ * @param ptr The target memory location.
+ * @param[in,out] expectedCurrentValue A pointer to some location holding the
+ * expected current value of the data being set atomically.
+ * The computed 'desiredValue' should be a function of this current value.
+ * @Note: This is an in-out parameter. In the
+ * failure case of atomic_cas (where the
+ * destination isn't set), the pointee of expectedCurrentValue is
+ * updated with the current value.
+ * @param[in] desiredValue The new value computed based on '*expectedCurrentValue'.
+ *
+ * @return true if the memory location was atomically
+ * updated with the desired value (after verifying
+ * that it contained the expectedCurrentValue),
+ * false otherwise. In the failure case,
+ * exepctedCurrentValue is updated with the new
+ * value of the target memory location.
+ *
+ * pseudocode:
+ * function cas(p : pointer to int, old : pointer to int, new : int) returns bool {
+ * if *p != *old {
+ * *old = *p
+ * return false
+ * }
+ * *p = new
+ * return true
+ * }
+ *
+ * @Note: In the failure case (where the destination isn't set), the value
+ * pointed to by expectedCurrentValue is still updated with the current value.
+ * This property helps writing concise code for the following incr:
+ *
+ * function incr(p : pointer to int, a : int) returns int {
+ * done = false
+ * value = *p // This fetch operation need not be atomic.
+ * while not done {
+ * done = atomic_cas(p, &value, value + a) // *value gets updated automatically until success
+ * }
+ * return value + a
+ * }
+ */
+bool core_util_atomic_cas_u32(uint32_t *ptr, uint32_t *expectedCurrentValue, uint32_t desiredValue);
+
+/**
+ * Atomic compare and set. It compares the contents of a memory location to a
+ * given value and, only if they are the same, modifies the contents of that
+ * memory location to a given new value. This is done as a single atomic
+ * operation. The atomicity guarantees that the new value is calculated based on
+ * up-to-date information; if the value had been updated by another thread in
+ * the meantime, the write would fail due to a mismatched expectedCurrentValue.
+ *
+ * Refer to https://en.wikipedia.org/wiki/Compare-and-set [which may redirect
+ * you to the article on compare-and swap].
+ *
+ * @param ptr The target memory location.
+ * @param[in,out] expectedCurrentValue A pointer to some location holding the
+ * expected current value of the data being set atomically.
+ * The computed 'desiredValue' should be a function of this current value.
+ * @Note: This is an in-out parameter. In the
+ * failure case of atomic_cas (where the
+ * destination isn't set), the pointee of expectedCurrentValue is
+ * updated with the current value.
+ * @param[in] desiredValue The new value computed based on '*expectedCurrentValue'.
+ *
+ * @return true if the memory location was atomically
+ * updated with the desired value (after verifying
+ * that it contained the expectedCurrentValue),
+ * false otherwise. In the failure case,
+ * exepctedCurrentValue is updated with the new
+ * value of the target memory location.
+ *
+ * pseudocode:
+ * function cas(p : pointer to int, old : pointer to int, new : int) returns bool {
+ * if *p != *old {
+ * *old = *p
+ * return false
+ * }
+ * *p = new
+ * return true
+ * }
+ *
+ * @Note: In the failure case (where the destination isn't set), the value
+ * pointed to by expectedCurrentValue is still updated with the current value.
+ * This property helps writing concise code for the following incr:
+ *
+ * function incr(p : pointer to int, a : int) returns int {
+ * done = false
+ * value = *p // This fetch operation need not be atomic.
+ * while not done {
+ * done = atomic_cas(p, &value, value + a) // *value gets updated automatically until success
+ * }
+ * return value + a
+ * }
+ */
+bool core_util_atomic_cas_ptr(void **ptr, void **expectedCurrentValue, void *desiredValue);
+
+/**
+ * Atomic increment.
+ * @param valuePtr Target memory location being incremented.
+ * @param delta The amount being incremented.
+ * @return The new incremented value.
+ */
+uint8_t core_util_atomic_incr_u8(uint8_t *valuePtr, uint8_t delta);
+
+/**
+ * Atomic increment.
+ * @param valuePtr Target memory location being incremented.
+ * @param delta The amount being incremented.
+ * @return The new incremented value.
+ */
+uint16_t core_util_atomic_incr_u16(uint16_t *valuePtr, uint16_t delta);
+
+/**
+ * Atomic increment.
+ * @param valuePtr Target memory location being incremented.
+ * @param delta The amount being incremented.
+ * @return The new incremented value.
+ */
+uint32_t core_util_atomic_incr_u32(uint32_t *valuePtr, uint32_t delta);
+
+/**
+ * Atomic increment.
+ * @param valuePtr Target memory location being incremented.
+ * @param delta The amount being incremented in bytes.
+ * @return The new incremented value.
+ *
+ * @note The type of the pointer argument is not taken into account
+ * and the pointer is incremented by bytes.
+ */
+void *core_util_atomic_incr_ptr(void **valuePtr, ptrdiff_t delta);
+
+/**
+ * Atomic decrement.
+ * @param valuePtr Target memory location being decremented.
+ * @param delta The amount being decremented.
+ * @return The new decremented value.
+ */
+uint8_t core_util_atomic_decr_u8(uint8_t *valuePtr, uint8_t delta);
+
+/**
+ * Atomic decrement.
+ * @param valuePtr Target memory location being decremented.
+ * @param delta The amount being decremented.
+ * @return The new decremented value.
+ */
+uint16_t core_util_atomic_decr_u16(uint16_t *valuePtr, uint16_t delta);
+
+/**
+ * Atomic decrement.
+ * @param valuePtr Target memory location being decremented.
+ * @param delta The amount being decremented.
+ * @return The new decremented value.
+ */
+uint32_t core_util_atomic_decr_u32(uint32_t *valuePtr, uint32_t delta);
+
+/**
+ * Atomic decrement.
+ * @param valuePtr Target memory location being decremented.
+ * @param delta The amount being decremented in bytes.
+ * @return The new decremented value.
+ *
+ * @note The type of the pointer argument is not taken into account
+ * and the pointer is decremented by bytes
+ */
+void *core_util_atomic_decr_ptr(void **valuePtr, ptrdiff_t delta);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+
+#endif // __MBED_UTIL_CRITICAL_H__
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/mbed.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/usb_cdc/mbed-dev/api/mbed.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,83 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_H +#define MBED_H + +#define MBED_LIBRARY_VERSION 126 + +#if MBED_CONF_RTOS_PRESENT +#include "rtos/rtos.h" +#endif + +#if MBED_CONF_NSAPI_PRESENT +#include "network-socket/nsapi.h" +#endif + +#include "toolchain.h" +#include "platform.h" + +// Useful C libraries +#include <math.h> +#include <time.h> + +// mbed Debug libraries +#include "mbed_error.h" +#include "mbed_interface.h" +#include "mbed_assert.h" + +// mbed Peripheral components +#include "DigitalIn.h" +#include "DigitalOut.h" +#include "DigitalInOut.h" +#include "BusIn.h" +#include "BusOut.h" +#include "BusInOut.h" +#include "PortIn.h" +#include "PortInOut.h" +#include "PortOut.h" +#include "AnalogIn.h" +#include "AnalogOut.h" +#include "PwmOut.h" +#include "Serial.h" +#include "SPI.h" +#include "SPISlave.h" +#include "I2C.h" +#include "I2CSlave.h" +#include "Ethernet.h" +#include "CAN.h" +#include "RawSerial.h" + +// mbed Internal components +#include "Timer.h" +#include "Ticker.h" +#include "Timeout.h" +#include "LowPowerTimeout.h" +#include "LowPowerTicker.h" +#include "LowPowerTimer.h" +#include "LocalFileSystem.h" +#include "InterruptIn.h" +#include "wait_api.h" +#include "sleep_api.h" +#include "rtc_time.h" + +// mbed Non-hardware components +#include "Callback.h" +#include "FunctionPointer.h" + +using namespace mbed; +using namespace std; + +#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/mbed_assert.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/mbed_assert.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ASSERT_H
+#define MBED_ASSERT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Internal mbed assert function which is invoked when MBED_ASSERT macro failes.
+ * This function is active only if NDEBUG is not defined prior to including this
+ * assert header file.
+ * In case of MBED_ASSERT failing condition, error() is called with the assertation message.
+ * @param expr Expresion to be checked.
+ * @param file File where assertation failed.
+ * @param line Failing assertation line number.
+ */
+void mbed_assert_internal(const char *expr, const char *file, int line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#ifdef NDEBUG
+#define MBED_ASSERT(expr) ((void)0)
+
+#else
+#define MBED_ASSERT(expr) \
+do { \
+ if (!(expr)) { \
+ mbed_assert_internal(#expr, __FILE__, __LINE__); \
+ } \
+} while (0)
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/mbed_debug.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/mbed_debug.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEBUG_H
+#define MBED_DEBUG_H
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#include <stdarg.h>
+
+/** Output a debug message
+ *
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug(const char *format, ...) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+}
+
+/** Conditionally output a debug message
+ *
+ * NOTE: If the condition is constant false (!= 1) and the compiler optimization
+ * level is greater than 0, then the whole function will be compiled away.
+ *
+ * @param condition output only if condition is true (== 1)
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug_if(int condition, const char *format, ...) {
+ if (condition == 1) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+ }
+}
+
+#else
+static inline void debug(const char *format, ...) {}
+static inline void debug_if(int condition, const char *format, ...) {}
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/mbed_error.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/mbed_error.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ERROR_H
+#define MBED_ERROR_H
+
+/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
+ *
+ * @code
+ * #error "That shouldn't have happened!"
+ * @endcode
+ *
+ * If the compiler evaluates this line, it will report the error and stop the compile.
+ *
+ * For example, you could use this to check some user-defined compile-time variables:
+ *
+ * @code
+ * #define NUM_PORTS 7
+ * #if (NUM_PORTS > 4)
+ * #error "NUM_PORTS must be less than 4"
+ * #endif
+ * @endcode
+ *
+ * Reporting Run-Time Errors:
+ * To generate a fatal run-time error, you can use the mbed error() function.
+ *
+ * @code
+ * error("That shouldn't have happened!");
+ * @endcode
+ *
+ * If the mbed running the program executes this function, it will print the
+ * message via the USB serial port, and then die with the blue lights of death!
+ *
+ * The message can use printf-style formatting, so you can report variables in the
+ * message too. For example, you could use this to check a run-time condition:
+ *
+ * @code
+ * if(x >= 5) {
+ * error("expected x to be less than 5, but got %d", x);
+ * }
+ * #endcode
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void error(const char* format, ...);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/mbed_interface.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/mbed_interface.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,130 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERFACE_H
+#define MBED_INTERFACE_H
+
+#include <stdarg.h>
+
+#include "device.h"
+
+/* Mbed interface mac address
+ * if MBED_MAC_ADD_x are zero, interface uid sets mac address,
+ * otherwise MAC_ADD_x are used.
+ */
+#define MBED_MAC_ADDR_INTERFACE 0x00
+#define MBED_MAC_ADDR_0 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_1 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_2 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_3 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_4 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_5 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDRESS_SUM (MBED_MAC_ADDR_0 | MBED_MAC_ADDR_1 | MBED_MAC_ADDR_2 | MBED_MAC_ADDR_3 | MBED_MAC_ADDR_4 | MBED_MAC_ADDR_5)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+/** Functions to control the mbed interface
+ *
+ * mbed Microcontrollers have a built-in interface to provide functionality such as
+ * drag-n-drop download, reset, serial-over-usb, and access to the mbed local file
+ * system. These functions provide means to control the interface suing semihost
+ * calls it supports.
+ */
+
+/** Determine whether the mbed interface is connected, based on whether debug is enabled
+ *
+ * @returns
+ * 1 if interface is connected,
+ * 0 otherwise
+ */
+int mbed_interface_connected(void);
+
+/** Instruct the mbed interface to reset, as if the reset button had been pressed
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise (e.g. interface not present)
+ */
+int mbed_interface_reset(void);
+
+/** This will disconnect the debug aspect of the interface, so semihosting will be disabled.
+ * The interface will still support the USB serial aspect
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_disconnect(void);
+
+/** This will disconnect the debug aspect of the interface, and if the USB cable is not
+ * connected, also power down the interface. If the USB cable is connected, the interface
+ * will remain powered up and visible to the host
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_powerdown(void);
+
+/** This returns a string containing the 32-character UID of the mbed interface
+ * This is a weak function that can be overwritten if required
+ *
+ * @param uid A 33-byte array to write the null terminated 32-byte string
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_uid(char *uid);
+
+#endif
+
+/** This returns a unique 6-byte MAC address, based on the interface UID
+ * If the interface is not present, it returns a default fixed MAC address (00:02:F7:F0:00:00)
+ *
+ * This is a weak function that can be overwritten if you want to provide your own mechanism to
+ * provide a MAC address.
+ *
+ * @param mac A 6-byte array to write the MAC address
+ */
+void mbed_mac_address(char *mac);
+
+/** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence
+ */
+void mbed_die(void);
+
+/** Print out an error message. This is typically called when
+ * hanlding a crash.
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+void mbed_error_printf(const char* format, ...);
+
+/** Print out an error message. Similar to mbed_error_printf
+ * but uses a va_list.
+ *
+ * @Note Synchronization level: Interrupt safe
+ */
+void mbed_error_vfprintf(const char * format, va_list arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/mbed_mem_trace.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/mbed_mem_trace.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,138 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __MBED_MEM_TRACE_H__
+#define __MBED_MEM_TRACE_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stddef.h>
+
+/* Operation types for tracer */
+enum {
+ MBED_MEM_TRACE_MALLOC,
+ MBED_MEM_TRACE_REALLOC,
+ MBED_MEM_TRACE_CALLOC,
+ MBED_MEM_TRACE_FREE
+};
+
+/* Prefix for the output of the default tracer */
+#define MBED_MEM_DEFAULT_TRACER_PREFIX "#"
+
+/**
+ * Type of the callback used by the memory tracer. This callback is called when a memory
+ * allocation operation (malloc, realloc, calloc, free) is called and tracing is enabled
+ * for that memory allocation function.
+ *
+ * @param op the ID of the operation (MBED_MEM_TRACE_MALLOC, MBED_MEM_TRACE_REALLOC,
+ * MBED_MEM_TRACE_CALLOC or MBED_MEM_TRACE_FREE).
+ * @param res the result that the memory operation returned (NULL for 'free').
+ * @param caller the caller of the memory operation. Note that the value of 'caller' might be
+ * unreliable.
+ *
+ * The rest of the parameters passed 'mbed_mem_trace_cb_t' are the same as the memory operations
+ * that triggered its call (see 'man malloc' for details):
+ *
+ * - for malloc: cb(MBED_MEM_TRACE_MALLOC, res, caller, size).
+ * - for realloc: cb(MBED_MEM_TRACE_REALLOC, res, caller, ptr, size).
+ * - for calloc: cb(MBED_MEM_TRACE_CALLOC, res, caller, nmemb, size).
+ * - for free: cb(MBED_MEM_TRACE_FREE, NULL, caller, ptr).
+ */
+typedef void (*mbed_mem_trace_cb_t)(uint8_t op, void *res, void* caller, ...);
+
+/**
+ * Set the callback used by the memory tracer (use NULL for disable tracing).
+ *
+ * @param cb the callback to call on each memory operation.
+ */
+void mbed_mem_trace_set_callback(mbed_mem_trace_cb_t cb);
+
+/**
+ * Trace a call to 'malloc'.
+ * @param res the result of running 'malloc'.
+ * @param size the 'size' argument given to 'malloc'.
+ * @param caller the caller of the memory operation.
+ * @return 'res' (the first argument).
+ */
+void *mbed_mem_trace_malloc(void *res, size_t size, void *caller);
+
+/**
+ * Trace a call to 'realloc'.
+ * @param res the result of running 'realloc'.
+ * @param ptr the 'ptr' argument given to 'realloc'.
+ * @param size the 'size' argument given to 'realloc'.
+ *
+ * @return 'res' (the first argument).
+ */
+void *mbed_mem_trace_realloc(void *res, void *ptr, size_t size, void *caller);
+
+/**
+ * Trace a call to 'calloc'.
+ * @param res the result of running 'calloc'.
+ * @param nmemb the 'nmemb' argument given to 'calloc'.
+ * @param size the 'size' argument given to 'calloc'.
+ * @param caller the caller of the memory operation.
+ * @Return 'res' (the first argument).
+ */
+void *mbed_mem_trace_calloc(void *res, size_t num, size_t size, void *caller);
+
+/**
+ * Trace a call to 'free'.
+ * @param ptr the 'ptr' argument given to 'free'.
+ * @param caller the caller of the memory operation.
+ */
+void mbed_mem_trace_free(void *ptr, void *caller);
+
+/**
+ * Default memory trace callback. DO NOT CALL DIRECTLY. It is meant to be used
+ * as the second argument of 'mbed_mem_trace_setup'.
+ *
+ * The default callback outputs trace data using 'printf', in a format that's
+ * easily parsable by an external tool. For each memory operation, the callback
+ * outputs a line that begins with '#<op>:<0xresult>;<0xcaller>-':
+ *
+ * - 'op' identifies the memory operation ('m' for 'malloc', 'r' for 'realloc',
+ * 'c' for 'calloc' and 'f' for 'free').
+ * - 'result' (base 16) is the result of the memor operation. This is always NULL
+ * for 'free', since 'free' doesn't return anything.
+ * -'caller' (base 16) is the caller of the memory operation. Note that the value
+ * of 'caller' might be unreliable.
+ *
+ * The rest of the output depends on the operation being traced:
+ *
+ * - for 'malloc': 'size', where 'size' is the original argument to 'malloc'.
+ * - for 'realloc': '0xptr;size', where 'ptr' (base 16) and 'size' are the original arguments to 'realloc'.
+ * - for 'calloc': 'nmemb;size', where 'nmemb' and 'size' are the original arguments to 'calloc'.
+ * - for 'free': '0xptr', where 'ptr' (base 16) is the original argument to 'free'.
+ *
+ * Examples:
+ *
+ * - '#m:0x20003240;0x600d-50' encodes a 'malloc' that returned 0x20003240, was called
+ * by the instruction at 0x600D with a the 'size' argument equal to 50.
+ * - '#f:0x0;0x602f-0x20003240' encodes a 'free' that was called by the instruction at
+ * 0x602f with the 'ptr' argument equal to 0x20003240.
+ */
+void mbed_mem_trace_default_callback(uint8_t op, void *res, void *caller, ...);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif// #ifndef __MBED_MEM_TRACE_H__
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/mbed_stats.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/mbed_stats.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,40 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_STATS_H
+#define MBED_STATS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ uint32_t current_size; /**< Bytes allocated currently. */
+ uint32_t max_size; /**< Max bytes allocated at a given time. */
+ uint32_t total_size; /**< Cumulative sum of bytes ever allocated. */
+ uint32_t alloc_cnt; /**< Current number of allocations. */
+ uint32_t alloc_fail_cnt; /**< Number of failed allocations. */
+} mbed_stats_heap_t;
+
+/**
+ * Fill the passed in structure with heap stats.
+ */
+void mbed_stats_heap_get(mbed_stats_heap_t *stats);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/platform.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/usb_cdc/mbed-dev/api/platform.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,28 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PLATFORM_H +#define MBED_PLATFORM_H + +#include "device.h" +#include "PinNames.h" +#include "PeripheralNames.h" + +#include <cstddef> +#include <cstdlib> +#include <cstdio> +#include <cstring> + +#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/rtc_time.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/rtc_time.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,87 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Implementation of the C time.h functions
+ *
+ * Provides mechanisms to set and read the current time, based
+ * on the microcontroller Real-Time Clock (RTC), plus some
+ * standard C manipulation and formating functions.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set RTC time to Wed, 28 Oct 2009 11:35:37
+ *
+ * while(1) {
+ * time_t seconds = time(NULL);
+ *
+ * printf("Time as seconds since January 1, 1970 = %d\n", seconds);
+ *
+ * printf("Time as a basic string = %s", ctime(&seconds));
+ *
+ * char buffer[32];
+ * strftime(buffer, 32, "%I:%M %p\n", localtime(&seconds));
+ * printf("Time as a custom formatted string = %s", buffer);
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+
+/** Set the current time
+ *
+ * Initialises and sets the time of the microcontroller Real-Time Clock (RTC)
+ * to the time represented by the number of seconds since January 1, 1970
+ * (the UNIX timestamp).
+ *
+ * @param t Number of seconds since January 1, 1970 (the UNIX timestamp)
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set time to Wed, 28 Oct 2009 11:35:37
+ * }
+ * @endcode
+ */
+void set_time(time_t t);
+
+/** Attach an external RTC to be used for the C time functions
+ *
+ * @Note Synchronization level: Thread safe
+ *
+ * @param read_rtc pointer to function which returns current UNIX timestamp
+ * @param write_rtc pointer to function which sets current UNIX timestamp, can be NULL
+ * @param init_rtc pointer to funtion which initializes RTC, can be NULL
+ * @param isenabled_rtc pointer to function wich returns if the rtc is enabled, can be NULL
+ */
+void attach_rtc(time_t (*read_rtc)(void), void (*write_rtc)(time_t), void (*init_rtc)(void), int (*isenabled_rtc)(void));
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/api/semihost_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/api/semihost_api.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SEMIHOST_H
+#define MBED_SEMIHOST_H
+
+#include "device.h"
+#include "toolchain.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+#ifndef __CC_ARM
+
+#if defined(__ICCARM__)
+static inline int __semihost(int reason, const void *arg) {
+ return __semihosting(reason, (void*)arg);
+}
+#else
+
+#ifdef __thumb__
+# define AngelSWI 0xAB
+# define AngelSWIInsn "bkpt"
+# define AngelSWIAsm bkpt
+#else
+# define AngelSWI 0x123456
+# define AngelSWIInsn "swi"
+# define AngelSWIAsm swi
+#endif
+
+static inline int __semihost(int reason, const void *arg) {
+ int value;
+
+ asm volatile (
+ "mov r0, %1" "\n\t"
+ "mov r1, %2" "\n\t"
+ AngelSWIInsn " %a3" "\n\t"
+ "mov %0, r0"
+ : "=r" (value) /* output operands */
+ : "r" (reason), "r" (arg), "i" (AngelSWI) /* input operands */
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" /* list of clobbered registers */
+ );
+
+ return value;
+}
+#endif
+#endif
+
+#if DEVICE_LOCALFILESYSTEM
+FILEHANDLE semihost_open(const char* name, int openmode);
+int semihost_close (FILEHANDLE fh);
+int semihost_read (FILEHANDLE fh, unsigned char* buffer, unsigned int length, int mode);
+int semihost_write (FILEHANDLE fh, const unsigned char* buffer, unsigned int length, int mode);
+int semihost_ensure(FILEHANDLE fh);
+long semihost_flen (FILEHANDLE fh);
+int semihost_seek (FILEHANDLE fh, long position);
+int semihost_istty (FILEHANDLE fh);
+
+int semihost_remove(const char *name);
+int semihost_rename(const char *old_name, const char *new_name);
+#endif
+
+int semihost_uid(char *uid);
+int semihost_reset(void);
+int semihost_vbus(void);
+int semihost_powerdown(void);
+int semihost_exit(void);
+
+int semihost_connected(void);
+int semihost_disabledebug(void);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/module.json
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/module.json Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,30 @@
+{
+ "name": "mbed-classic",
+ "version": "0.0.1",
+ "description": "mbed core SDK (for mbed 2.0, *not* mbedOS)",
+ "keywords": [
+ "mbed"
+ ],
+ "author": "Bogdan Marinescu <bogdan.marinescu@arm.com>",
+ "repository": {
+ "url": "git@github.com:mbedmicro/mbed.git",
+ "type": "git"
+ },
+ "homepage": "https://github.com/mbedmicro/mbed",
+ "licenses": [
+ {
+ "url": "https://spdx.org/licenses/Apache-2.0",
+ "type": "Apache-2.0"
+ }
+ ],
+ "extraIncludes": [
+ "api",
+ "hal",
+ "targets/hal",
+ "targets/cmsis"
+ ],
+ "dependencies": {
+ },
+ "targetDependencies": {
+ }
+}
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets.json
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets.json Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2114 @@
+{
+ "Target": {
+ "core": null,
+ "default_toolchain": "ARM",
+ "supported_toolchains": null,
+ "extra_labels": [],
+ "is_disk_virtual": false,
+ "macros": [],
+ "device_has": [],
+ "features": [],
+ "detect_code": [],
+ "public": false,
+ "default_build": "standard"
+ },
+ "CM4_UARM": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "default_toolchain": "uARM",
+ "public": false,
+ "supported_toolchains": ["uARM"],
+ "default_build": "small"
+ },
+ "CM4_ARM": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "public": false,
+ "supported_toolchains": ["ARM"]
+ },
+ "CM4F_UARM": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "uARM",
+ "public": false,
+ "supported_toolchains": ["uARM"],
+ "default_build": "small"
+ },
+ "CM4F_ARM": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "public": false,
+ "supported_toolchains": ["ARM"]
+ },
+ "LPCTarget": {
+ "inherits": ["Target"],
+ "post_binary_hook": {"function": "LPCTargetCode.lpc_patch"},
+ "public": false
+ },
+ "LPC11C24": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "progen": {"target": "lpc11c24_301"},
+ "extra_labels": ["NXP", "LPC11XX_11CXX", "LPC11CXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "device_has": ["ANALOGIN", "CAN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC1114": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11XX_11CXX", "LPC11XX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc1114_102"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U24": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "LPC11U24_401"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "progen": {
+ "target": "lpc11u24_201"
+ },
+ "detect_code": ["1040"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "OC_MBUINO": {
+ "inherits": ["LPC11U24"],
+ "macros": ["TARGET_LPC11U24"],
+ "progen": {
+ "target": "lpc11u24_201"
+ },
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "LPC11U24_301": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC11U34_421": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small"
+ },
+ "MICRONFCBOARD": {
+ "inherits": ["LPC11U34_421"],
+ "macros": ["LPC11U34_421", "APPNEARME_MICRONFCBOARD"],
+ "extra_labels_add": ["APPNEARME_MICRONFCBOARD"],
+ "release_versions": ["2"]
+ },
+ "LPC11U35_401": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_401"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U35_501": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U35_501_IBDAP": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small"
+ },
+ "XADOW_M0": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U35_Y5_MBUG": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u35_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small"
+ },
+ "LPC11U37_501": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {
+ "target": "lpc11u37_501"
+ },
+ "default_build": "small"
+ },
+ "LPCCAPPUCCINO": {
+ "inherits": ["LPC11U37_501"],
+ "progen": {
+ "target": "lpc11u37_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "ARCH_GPRS": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX", "LPC11U37_501"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc11u37_501"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC11U68": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11U6X"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_CR", "GCC_ARM", "IAR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc11u68"
+ },
+ "detect_code": ["1168"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC1347": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M3",
+ "progen": {"target": "lpc1347"},
+ "extra_labels": ["NXP", "LPC13XX"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "LPC1549": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M3",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC15XX"],
+ "supported_toolchains": ["uARM", "GCC_CR", "GCC_ARM", "IAR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc1549"
+ },
+ "detect_code": ["1549"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "INTERRUPTIN", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC1768": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M3",
+ "extra_labels": ["NXP", "LPC176X", "MBED_LPC1768"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "progen": {"target": "mbed-lpc1768"},
+ "detect_code": ["1010"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "ARCH_PRO": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "extra_labels": ["NXP", "LPC176X"],
+ "macros": ["TARGET_LPC1768"],
+ "inherits": ["LPCTarget"],
+ "progen": {"target": "arch-pro"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "UBLOX_C027": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "extra_labels": ["NXP", "LPC176X"],
+ "macros": ["TARGET_LPC1768"],
+ "inherits": ["LPCTarget"],
+ "progen": {"target": "ublox-c027"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_RED", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "XBED_LPC1768": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "extra_labels": ["NXP", "LPC176X", "XBED_LPC1768"],
+ "macros": ["TARGET_LPC1768"],
+ "progen": {"target": "lpc1768"},
+ "detect_code": ["1010"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC2368": {
+ "inherits": ["LPCTarget"],
+ "core": "ARM7TDMI-S",
+ "progen": {"target": "lpc2368"},
+ "extra_labels": ["NXP", "LPC23XX"],
+ "supported_toolchains": ["GCC_ARM", "GCC_CR"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC2460": {
+ "inherits": ["LPCTarget"],
+ "core": "ARM7TDMI-S",
+ "progen": {"target": "lpc2460"},
+ "extra_labels": ["NXP", "LPC2460"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC810": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC81X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["uARM", "IAR", "GCC_ARM"],
+ "progen": {
+ "target": "lpc810"
+ },
+ "device_has": ["ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small"
+ },
+ "LPC812": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC81X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["uARM", "IAR", "GCC_ARM"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc812m101"
+ },
+ "detect_code": ["1050"],
+ "device_has": ["ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC824": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC82X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["uARM", "GCC_ARM", "GCC_CR", "IAR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc824m201"
+ },
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "SSCI824": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC82X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["uARM", "GCC_ARM"],
+ "progen": {
+ "target": "ssci824"
+ },
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "LPC4088": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M4F",
+ "extra_labels": ["NXP", "LPC408X"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_CR", "GCC_ARM", "IAR"],
+ "post_binary_hook": {
+ "function": "LPC4088Code.binary_hook",
+ "toolchains": ["ARM_STD", "ARM_MICRO"]
+ },
+ "progen": {"target": "lpc4088"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "LPC4088_DM": {
+ "inherits": ["LPC4088"],
+ "release_versions": ["2", "5"]
+ },
+ "LPC4330_M4": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M4F",
+ "progen": {"target": "lpc4330"},
+ "extra_labels": ["NXP", "LPC43XX", "LPC4330"],
+ "supported_toolchains": ["ARM", "GCC_CR", "IAR", "GCC_ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC4330_M0": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M0",
+ "extra_labels": ["NXP", "LPC43XX", "LPC4330"],
+ "supported_toolchains": ["ARM", "GCC_CR", "IAR"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "LPC4337": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M4F",
+ "progen": {"target": "lpc4337"},
+ "extra_labels": ["NXP", "LPC43XX", "LPC4337"],
+ "supported_toolchains": ["ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ERROR_RED", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "LPC1800": {
+ "inherits": ["LPCTarget"],
+ "core": "Cortex-M3",
+ "extra_labels": ["NXP", "LPC43XX"],
+ "public": false,
+ "supported_toolchains": ["ARM", "GCC_CR", "IAR"]
+ },
+ "LPC11U37H_401": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC11UXX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR"],
+ "inherits": ["LPCTarget"],
+ "progen": {
+ "target": "lpc11u37_401"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "ELEKTOR_COCORICO": {
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["NXP", "LPC81X"],
+ "supported_toolchains": ["uARM", "GCC_ARM", "IAR"],
+ "inherits": ["LPCTarget"],
+ "is_disk_virtual": true,
+ "detect_code": ["C000"],
+ "progen": {
+ "target": "cocorico"
+ },
+ "default_build": "small"
+ },
+ "KL05Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "extra_labels": ["Freescale", "KLXX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {
+ "target": "frdm-kl05z"
+ },
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "KL25Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["Freescale", "KLXX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-kl25z"},
+ "detect_code": ["0200"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "KL26Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["Freescale", "KLXX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "kl26z"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "KL46Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["Freescale", "KLXX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-kl46z"},
+ "detect_code": ["0220"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "K20D50M": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "extra_labels": ["Freescale", "K20XX"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "progen": {"target": "frdm-k20d50m"},
+ "detect_code": ["0230"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "TEENSY3_1": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "extra_labels": ["Freescale", "K20XX", "K20DX256"],
+ "OUTPUT_EXT": "hex",
+ "is_disk_virtual": true,
+ "supported_toolchains": ["GCC_ARM", "ARM"],
+ "post_binary_hook": {
+ "function": "TEENSY3_1Code.binary_hook",
+ "toolchains": ["ARM_STD", "ARM_MICRO", "GCC_ARM"]
+ },
+ "progen": {"target": "teensy-31"},
+ "detect_code": ["0230"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "K22F": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM", "KPSDK_MCUS", "KPSDK_CODE"],
+ "is_disk_virtual": true,
+ "macros": ["CPU_MK22FN512VLH12", "FSL_RTOS_MBED"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-k22f"},
+ "detect_code": ["0231"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "KL27Z": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM"],
+ "macros": ["CPU_MKL27Z64VLH4", "FSL_RTOS_MBED"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "supported_form_factors": ["ARDUINO"],
+ "is_disk_virtual": true,
+ "default_toolchain": "ARM",
+ "detect_code": ["0261"],
+ "progen_target": {"target": "frdm-kl27z"},
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "standard",
+ "release_versions": ["2"]
+ },
+ "KL43Z": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0+",
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM"],
+ "macros": ["CPU_MKL43Z256VLH4", "FSL_RTOS_MBED"],
+ "is_disk_virtual": true,
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-kl43z"},
+ "detect_code": ["0262"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "K64F": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM", "KPSDK_MCUS", "KPSDK_CODE", "MCU_K64F"],
+ "is_disk_virtual": true,
+ "macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-k64f"},
+ "detect_code": ["0240"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "STORAGE"],
+ "features": ["IPV4", "STORAGE"],
+ "release_versions": ["2", "5"]
+ },
+ "MTS_GAMBIT": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "GCC_ARM"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "KPSDK_MCUS", "KPSDK_CODE", "MCU_K64F"],
+ "is_disk_virtual": true,
+ "macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "TARGET_K64F"],
+ "progen": {"target": "mts-gambit"},
+ "device_has": ["I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "HEXIWEAR": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "MCU_K64F"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "TARGET_K64F"],
+ "is_disk_virtual": true,
+ "default_toolchain": "ARM",
+ "detect_code": ["0214"],
+ "progen": {"target": "hexiwear-k64f"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "standard",
+ "release_versions": ["2", "5"]
+ },
+ "K66F": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM"],
+ "is_disk_virtual": true,
+ "macros": ["CPU_MK66FN2M0VMD18", "FSL_RTOS_MBED", "MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "inherits": ["Target"],
+ "progen": {"target": "frdm-k66f"},
+ "detect_code": ["0311"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F030R8": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F030R8"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f030r8"},
+ "detect_code": ["0725"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F031K6": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F031K6"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f031k6"},
+ "detect_code": ["0791"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F042K6": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F042K6"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f042k6"},
+ "detect_code": ["0785"],
+ "device_has": ["ANALOGIN", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F070RB": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F070RB"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f070rb"},
+ "detect_code": ["0755"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F072RB": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F072RB"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f072rb"},
+ "detect_code": ["0730"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F091RC": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F091RC"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f091rc"},
+ "detect_code": ["0750"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F103RB": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M3",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F1", "STM32F103RB"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f103rb"},
+ "detect_code": ["0700"],
+ "device_has": ["ANALOGIN", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F207ZG": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M3",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F2", "STM32F207ZG"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f207zg"},
+ "detect_code": ["0835"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F302R8": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F302R8"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f302r8"},
+ "detect_code": ["0705"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F303K8": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F303K8"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f303k8"},
+ "detect_code": ["0775"],
+ "default_lib": "small",
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F303RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F303RE"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f303re"},
+ "detect_code": ["0745"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F303ZE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "fpu": "single",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F303ZE"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f303ze"},
+ "detect_code": ["0745"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F334R8": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F334R8"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f334r8"},
+ "detect_code": ["0735"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F401RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F401RE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f401re"},
+ "detect_code": ["0720"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F410RB": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F410RB","STM32F410Rx"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f410rb"},
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "detect_code": ["0740"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F411RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f411re"},
+ "detect_code": ["0740"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "ELMO_F411RE": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "inherits": ["Target"],
+ "detect_code": ["----"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_F429ZI": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F429", "STM32F429ZI", "STM32F429xx"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "progen": {"target": "nucleo-f429zi"},
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT", "DEVICE_RTC_LSI=1"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "detect_code": ["0796"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F446RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F446RE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f446re"},
+ "detect_code": ["0777"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F446ZE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F446ZE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-f446ze"},
+ "detect_code": ["0778"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+
+ "B96B_F446VE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F446VE"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "detect_code": ["0840"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F746ZG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M7F",
+ "extra_labels": ["STM", "STM32F7", "STM32F746", "STM32F746ZG"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "progen": {
+ "target": "nucleo-f746zg",
+ "iar": {
+ "template": ["iar_nucleo_f746zg.ewp.tmpl"]
+ }
+ },
+ "supported_form_factors": ["ARDUINO"],
+ "detect_code": ["0816"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_F767ZI": {
+ "inherits": ["Target"],
+ "core": "Cortex-M7FD",
+ "extra_labels": ["STM", "STM32F7", "STM32F767", "STM32F767ZI"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "progen": {"target": "nucleo-f767zi"},
+ "detect_code": ["0818"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_L011K4": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "extra_labels": ["STM", "STM32L0", "STM32L011K4"],
+ "supported_toolchains": ["uARM"],
+ "default_toolchain": "uARM",
+ "supported_form_factors": ["ARDUINO"],
+ "detect_code": ["0780"],
+ "progen": {"target":"nucleo-l011k4"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+
+ "NUCLEO_L031K6": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "extra_labels": ["STM", "STM32L0", "STM32L031K6"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "default_toolchain": "uARM",
+ "supported_form_factors": ["ARDUINO"],
+ "detect_code": ["0790"],
+ "progen": {"target": "nucleo-l031k6"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_L053R8": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L0", "STM32L053R8"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l053r8"},
+ "detect_code": ["0715"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "NUCLEO_L073RZ": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L0", "STM32L073RZ"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l073rz"},
+ "detect_code": ["0760"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_L152RE": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M3",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L1", "STM32L152RE"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l152re"},
+ "detect_code": ["0710"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_L432KC": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L4", "STM32L432KC"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l432kc"},
+ "detect_code": ["0770"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "CAN", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "NUCLEO_L476RG": {
+ "supported_form_factors": ["ARDUINO", "MORPHO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L4", "STM32L476RG"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "nucleo-l476rg"},
+ "detect_code": ["0765"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "STM32F3XX": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3XX"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"]
+ },
+ "STM32F407": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "extra_labels": ["STM", "STM32F4", "STM32F4XX"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"]
+ },
+ "ARCH_MAX": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "program_cycle_s": 2,
+ "extra_labels": ["STM", "STM32F4", "STM32F407", "STM32F407VG"],
+ "macros": ["LSI_VALUE=32000"],
+ "inherits": ["Target"],
+ "progen": {"target": "arch-max"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "DISCO_F051R8": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F0", "STM32F051", "STM32F051R8"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "DISCO_F100RB": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F1", "STM32F100RB"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "DISCO_F303VC": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F303", "STM32F303VC"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "DISCO_F334C8": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F3", "STM32F334C8"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "progen": {"target": "disco-f334c8"},
+ "detect_code": ["0810"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "DISCO_F407VG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "progen": {"target": "disco-f407vg"},
+ "extra_labels": ["STM", "STM32F4", "STM32F407", "STM32F407VG"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "DISCO_F429ZI": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F429", "STM32F429ZI", "STM32F429xx"],
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT", "DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "progen": {"target": "disco-f429zi"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "DISCO_F469NI": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F469", "STM32F469NI", "STM32F469xx"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "inherits": ["Target"],
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "progen": {"target": "disco-f469ni"},
+ "detect_code": ["0788"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "DISCO_L053C8": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L0", "STM32L053C8"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "progen": {"target": "disco-l053c8"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_lib": "small",
+ "release_versions": ["2"]
+ },
+ "DISCO_F746NG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M7F",
+ "extra_labels": ["STM", "STM32F7", "STM32F746", "STM32F746NG"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "progen": {"target": "disco-f746ng"},
+ "detect_code": ["0815"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "DISCO_F769NI": {
+ "inherits": ["Target"],
+ "core": "Cortex-M7FD",
+ "extra_labels": ["STM", "STM32F7", "STM32F769", "STM32F769NI"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "progen": {"target": "disco-f769ni"},
+ "detect_code": ["0817"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2"]
+ },
+ "DISCO_L476VG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["STM", "STM32L4", "STM32L476VG"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "progen": {"target": "disco-l476vg"},
+ "detect_code": ["0820"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MTS_MDOT_F405RG": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["STM", "STM32F4", "STM32F405RG"],
+ "is_disk_virtual": true,
+ "macros": ["HSE_VALUE=26000000", "OS_CLOCK=48000000"],
+ "progen": {"target": "mts-mdot-f405rg"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "MTS_MDOT_F411RE": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+ "macros": ["HSE_VALUE=26000000", "OS_CLOCK=96000000", "USE_PLL_HSE_EXTC=0", "VECT_TAB_OFFSET=0x00010000"],
+ "post_binary_hook": {
+ "function": "MTSCode.combine_bins_mts_dot",
+ "toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO"]
+ },
+ "progen": {"target": "mts-mdot-f411re"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MTS_DRAGONFLY_F411RE": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+ "macros": ["HSE_VALUE=26000000", "VECT_TAB_OFFSET=0x08010000"],
+ "post_binary_hook": {
+ "function": "MTSCode.combine_bins_mts_dragonfly",
+ "toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO"]
+ },
+ "progen": {"target": "mts-dragonfly-f411re"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MOTE_L152RC": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "default_toolchain": "uARM",
+ "extra_labels": ["STM", "STM32L1", "STM32L152RC"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+ "progen": {"target": "stm32l151rc"},
+ "detect_code": ["4100"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "release_versions": ["2"]
+ },
+ "DISCO_F401VC": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "GCC_ARM",
+ "extra_labels": ["STM", "STM32F4", "STM32F401", "STM32F401VC"],
+ "supported_toolchains": ["GCC_ARM"],
+ "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+ },
+ "UBLOX_C029": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "default_toolchain": "uARM",
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["STM", "STM32F4", "STM32F439", "STM32F439ZI"],
+ "macros": ["HSE_VALUE=24000000", "HSE_STARTUP_TIMEOUT=5000"],
+ "inherits": ["Target"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small"
+ },
+ "NZ32_SC151": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "default_toolchain": "uARM",
+ "program_cycle_s": 1.5,
+ "extra_labels": ["STM", "STM32L1", "STM32L151RC"],
+ "macros": ["DEVICE_RTC_LSI=1"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "progen": {"target": "stm32l151rc"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "default_build": "small"
+ },
+ "MCU_NRF51": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "OVERRIDE_BOOTLOADER_FILENAME": "nrf51822_bootloader.hex",
+ "macros": ["NRF51", "TARGET_NRF51822"],
+ "MERGE_BOOTLOADER": false,
+ "extra_labels": ["NORDIC", "MCU_NRF51", "MCU_NRF51822"],
+ "OUTPUT_EXT": "hex",
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_ARM"],
+ "public": false,
+ "MERGE_SOFT_DEVICE": true,
+ "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+ {
+ "boot": "s130_nrf51_1.0.0_bootloader.hex",
+ "name": "s130_nrf51_1.0.0_softdevice.hex",
+ "offset": 114688
+ },
+ {
+ "boot": "s110_nrf51822_8.0.0_bootloader.hex",
+ "name": "s110_nrf51822_8.0.0_softdevice.hex",
+ "offset": 98304
+ },
+ {
+ "boot": "s110_nrf51822_7.1.0_bootloader.hex",
+ "name": "s110_nrf51822_7.1.0_softdevice.hex",
+ "offset": 90112
+ },
+ {
+ "boot": "s110_nrf51822_7.0.0_bootloader.hex",
+ "name": "s110_nrf51822_7.0.0_softdevice.hex",
+ "offset": 90112
+ },
+ {
+ "boot": "s110_nrf51822_6.0.0_bootloader.hex",
+ "name": "s110_nrf51822_6.0.0_softdevice.hex",
+ "offset": 81920
+ }
+ ],
+ "detect_code": ["1070"],
+ "post_binary_hook": {
+ "function": "MCU_NRF51Code.binary_hook",
+ "toolchains": ["ARM_STD", "GCC_ARM"]
+ },
+ "program_cycle_s": 6,
+ "features": ["BLE"]
+ },
+ "MCU_NRF51_16K_BASE": {
+ "inherits": ["MCU_NRF51"],
+ "extra_labels_add": ["MCU_NORDIC_16K", "MCU_NRF51_16K"],
+ "macros_add": ["TARGET_MCU_NORDIC_16K", "TARGET_MCU_NRF51_16K"],
+ "public": false,
+ "default_build": "small"
+ },
+ "MCU_NRF51_16K_BOOT_BASE": {
+ "inherits": ["MCU_NRF51_16K_BASE"],
+ "MERGE_BOOTLOADER": true,
+ "extra_labels_add": ["MCU_NRF51_16K_BOOT"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_BOOT", "TARGET_OTA_ENABLED"],
+ "public": false
+ },
+ "MCU_NRF51_16K_OTA_BASE": {
+ "inherits": ["MCU_NRF51_16K_BASE"],
+ "public": false,
+ "extra_labels_add": ["MCU_NRF51_16K_OTA"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_OTA", "TARGET_OTA_ENABLED"],
+ "MERGE_SOFT_DEVICE": false
+ },
+ "MCU_NRF51_16K": {
+ "inherits": ["MCU_NRF51_16K_BASE"],
+ "extra_labels_add": ["MCU_NRF51_16K_S130"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_S130"],
+ "public": false
+ },
+ "MCU_NRF51_S110": {
+ "extra_labels_add": ["MCU_NRF51_16K_S110"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_S110"],
+ "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+ {
+ "name": "s110_nrf51822_8.0.0_softdevice.hex",
+ "boot": "s110_nrf51822_8.0.0_bootloader.hex",
+ "offset": 98304
+ },
+ {
+ "name": "s110_nrf51822_7.1.0_softdevice.hex",
+ "boot": "s110_nrf51822_7.1.0_bootloader.hex",
+ "offset": 90112
+ }
+ ],
+ "public": false
+ },
+ "MCU_NRF51_16K_S110": {
+ "inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_BASE"],
+ "public": false
+ },
+ "MCU_NRF51_16K_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT_BASE"],
+ "extra_labels_add": ["MCU_NRF51_16K_S130"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_S130"],
+ "public": false
+ },
+ "MCU_NRF51_16K_BOOT_S110": {
+ "inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_BOOT_BASE"],
+ "public": false
+ },
+ "MCU_NRF51_16K_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA_BASE"],
+ "extra_labels_add": ["MCU_NRF51_16K_S130"],
+ "macros_add": ["TARGET_MCU_NRF51_16K_S130"],
+ "public": false
+ },
+ "MCU_NRF51_16K_OTA_S110": {
+ "inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_OTA_BASE"],
+ "public": false
+ },
+ "MCU_NRF51_32K": {
+ "inherits": ["MCU_NRF51"],
+ "extra_labels_add": ["MCU_NORDIC_32K", "MCU_NRF51_32K"],
+ "macros_add": ["TARGET_MCU_NORDIC_32K", "TARGET_MCU_NRF51_32K"],
+ "public": false
+ },
+ "MCU_NRF51_32K_BOOT": {
+ "inherits": ["MCU_NRF51_32K"],
+ "MERGE_BOOTLOADER": true,
+ "extra_labels_add": ["MCU_NRF51_32K_BOOT"],
+ "macros_add": ["TARGET_MCU_NRF51_32K_BOOT", "TARGET_OTA_ENABLED"],
+ "public": false
+ },
+ "MCU_NRF51_32K_OTA": {
+ "inherits": ["MCU_NRF51_32K"],
+ "public": false,
+ "extra_labels_add": ["MCU_NRF51_32K_OTA"],
+ "macros_add": ["TARGET_MCU_NRF51_32K_OTA", "TARGET_OTA_ENABLED"],
+ "MERGE_SOFT_DEVICE": false
+ },
+ "NRF51822": {
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "mkit"},
+ "extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
+ "macros_add": ["TARGET_NRF51822_MKIT"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "NRF51822_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
+ "macros_add": ["TARGET_NRF51822_MKIT"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "NRF51822_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
+ "macros_add": ["TARGET_NRF51822_MKIT"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "ARCH_BLE": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "arch-ble"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "ARCH_BLE_BOOT": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["ARCH_BLE"],
+ "macros_add": ["TARGET_ARCH_BLE"]
+ },
+ "ARCH_BLE_OTA": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["ARCH_BLE"],
+ "macros_add": ["TARGET_ARCH_BLE"]
+ },
+ "ARCH_LINK": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K"],
+ "extra_labels_add": ["ARCH_BLE"],
+ "macros_add": ["TARGET_ARCH_BLE"]
+ },
+ "ARCH_LINK_BOOT": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["ARCH_BLE", "ARCH_LINK"],
+ "macros_add": ["TARGET_ARCH_BLE", "TARGET_ARCH_LINK"]
+ },
+ "ARCH_LINK_OTA": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["ARCH_BLE", "ARCH_LINK"],
+ "macros_add": ["TARGET_ARCH_BLE", "TARGET_ARCH_LINK"]
+ },
+ "SEEED_TINY_BLE": {
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "seed-tinyble"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "SEEED_TINY_BLE_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["SEEED_TINY_BLE"],
+ "macros_add": ["TARGET_SEEED_TINY_BLE"]
+ },
+ "SEEED_TINY_BLE_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["SEEED_TINY_BLE"],
+ "macros_add": ["TARGET_SEEED_TINY_BLE"]
+ },
+ "HRM1017": {
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "hrm1017"},
+ "macros_add": ["TARGET_NRF_LFCLK_RC"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "HRM1017_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["HRM1017"],
+ "macros_add": ["TARGET_HRM1017", "TARGET_NRF_LFCLK_RC"]
+ },
+ "HRM1017_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["HRM1017"],
+ "macros_add": ["TARGET_HRM1017", "TARGET_NRF_LFCLK_RC"]
+ },
+ "RBLAB_NRF51822": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K"],
+ "progen": {"target": "rblab-nrf51822"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "RBLAB_NRF51822_BOOT": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["RBLAB_NRF51822"],
+ "macros_add": ["TARGET_RBLAB_NRF51822"]
+ },
+ "RBLAB_NRF51822_OTA": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["RBLAB_NRF51822"],
+ "macros_add": ["TARGET_RBLAB_NRF51822"]
+ },
+ "RBLAB_BLENANO": {
+ "inherits": ["MCU_NRF51_16K"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "RBLAB_BLENANO_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["RBLAB_BLENANO"],
+ "macros_add": ["TARGET_RBLAB_BLENANO"]
+ },
+ "RBLAB_BLENANO_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["RBLAB_BLENANO"],
+ "macros_add": ["TARGET_RBLAB_BLENANO"]
+ },
+ "NRF51822_Y5_MBUG": {
+ "inherits": ["MCU_NRF51_16K"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "WALLBOT_BLE": {
+ "inherits": ["MCU_NRF51_16K"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "WALLBOT_BLE_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["WALLBOT_BLE"],
+ "macros_add": ["TARGET_WALLBOT_BLE"]
+ },
+ "WALLBOT_BLE_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["WALLBOT_BLE"],
+ "macros_add": ["TARGET_WALLBOT_BLE"]
+ },
+ "DELTA_DFCM_NNN40": {
+ "inherits": ["MCU_NRF51_32K"],
+ "program_cycle_s": 10,
+ "progen": {"target": "dfcm-nnn40"},
+ "macros_add": ["TARGET_NRF_LFCLK_RC"],
+ "device_has": ["ANALOGIN", "DEBUG_AWARENESS", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "DELTA_DFCM_NNN40_BOOT": {
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "program_cycle_s": 10,
+ "extra_labels_add": ["DELTA_DFCM_NNN40"],
+ "macros_add": ["TARGET_DELTA_DFCM_NNN40", "TARGET_NRF_LFCLK_RC"]
+ },
+ "DELTA_DFCM_NNN40_OTA": {
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "program_cycle_s": 10,
+ "extra_labels_add": ["DELTA_DFCM_NNN40"],
+ "macros_add": ["TARGET_DELTA_DFCM_NNN40", "TARGET_NRF_LFCLK_RC"]
+ },
+ "NRF51_DK_LEGACY": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_32K"],
+ "progen": {"target": "nrf51-dk"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "NRF51_DK_BOOT": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "extra_labels_add": ["NRF51_DK"],
+ "macros_add": ["TARGET_NRF51_DK"]
+ },
+ "NRF51_DK_OTA": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "extra_labels_add": ["NRF51_DK"],
+ "macros_add": ["TARGET_NRF51_DK"]
+ },
+ "NRF51_DONGLE": {
+ "inherits": ["MCU_NRF51_32K"],
+ "progen": {"target": "nrf51-dongle"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "NRF51_DONGLE_BOOT": {
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "extra_labels_add": ["NRF51_DONGLE"],
+ "macros_add": ["TARGET_NRF51_DONGLE"]
+ },
+ "NRF51_DONGLE_OTA": {
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "extra_labels_add": ["NRF51_DONGLE"],
+ "macros_add": ["TARGET_NRF51_DONGLE"]
+ },
+ "NRF51_MICROBIT": {
+ "inherits": ["MCU_NRF51_16K_S110"],
+ "macros_add": ["TARGET_NRF_LFCLK_RC"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "NRF51_MICROBIT_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT_S110"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+ },
+ "NRF51_MICROBIT_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA_S110"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+ },
+ "NRF51_MICROBIT_B": {
+ "inherits": ["MCU_NRF51_16K"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "NRF51_MICROBIT_B_BOOT": {
+ "inherits": ["MCU_NRF51_16K_BOOT"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+ },
+ "NRF51_MICROBIT_B_OTA": {
+ "inherits": ["MCU_NRF51_16K_OTA"],
+ "extra_labels_add": ["NRF51_MICROBIT"],
+ "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+ },
+ "MTM_MTCONNECT04S": {
+ "inherits": ["MCU_NRF51_32K"],
+ "progen": {"target": "mtm-mtconnect04s"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+ "release_versions": ["2"]
+ },
+ "MTM_MTCONNECT04S_BOOT": {
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "extra_labels_add": ["MTM_CONNECT04S"],
+ "macros_add": ["TARGET_MTM_CONNECT04S"]
+ },
+ "MTM_MTCONNECT04S_OTA": {
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "extra_labels_add": ["MTM_CONNECT04S"],
+ "macros_add": ["TARGET_MTM_CONNECT04S"]
+ },
+
+ "TY51822R3": {
+ "inherits": ["MCU_NRF51_32K_UNIFIED"],
+ "macros_add": ["TARGET_NRF_32MHZ_XTAL"],
+ "progen": {"target": "ty51822r3"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "detect_code": ["1019"],
+ "release_versions": ["2", "5"],
+ "overrides": { "uart_hwfc": 0 }
+ },
+ "TY51822R3_BOOT": {
+ "inherits": ["MCU_NRF51_32K_BOOT"],
+ "extra_labels_add": ["TY51822R3"],
+ "macros_add": ["TARGET_TY51822R3", "TARGET_NRF_32MHZ_XTAL"]
+ },
+ "TY51822R3_OTA": {
+ "inherits": ["MCU_NRF51_32K_OTA"],
+ "extra_labels_add": ["NRF51_DK"],
+ "macros_add": ["TARGET_TY51822R3", "TARGET_NRF_32MHZ_XTAL"]
+ },
+ "ARM_MPS2_Target": {
+ "inherits": ["Target"],
+ "public": false,
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
+ },
+ "ARM_MPS2_M0": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M0",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M0"],
+ "macros": ["CMSDK_CM0"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_MPS2_M0P": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M0+",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M0P"],
+ "macros": ["CMSDK_CM0plus"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_MPS2_M1": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M1",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M1"],
+ "macros": ["CMSDK_CM1"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
+ },
+ "ARM_MPS2_M3": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M3"],
+ "macros": ["CMSDK_CM3"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_MPS2_M4": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M4F",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M4"],
+ "macros": ["CMSDK_CM4"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_MPS2_M7": {
+ "inherits": ["ARM_MPS2_Target"],
+ "core": "Cortex-M7",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M7"],
+ "macros": ["CMSDK_CM7"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_IOTSS_Target": {
+ "inherits": ["Target"],
+ "public": false,
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
+ },
+ "ARM_IOTSS_BEID": {
+ "inherits": ["ARM_IOTSS_Target"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM"],
+ "extra_labels": ["ARM_SSG", "IOTSS", "IOTSS_BEID"],
+ "macros": ["CMSDK_BEID"],
+ "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+ "release_versions": ["2"]
+ },
+ "ARM_BEETLE_SOC": {
+ "inherits": ["ARM_IOTSS_Target"],
+ "core": "Cortex-M3",
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "extra_labels": ["ARM_SSG", "BEETLE"],
+ "macros": ["CMSDK_BEETLE", "WSF_MS_PER_TICK=20", "WSF_TOKEN_ENABLED=FALSE", "WSF_TRACE_ENABLED=TRUE", "WSF_ASSERT_ENABLED=FALSE", "WSF_PRINTF_MAX_LEN=128", "ASIC", "CONFIG_HOST_REV=0x20", "CONFIG_ALLOW_DEEP_SLEEP=FALSE", "HCI_VS_TARGET", "CONFIG_ALLOW_SETTING_WRITE=TRUE", "WSF_MAX_HANDLERS=20", "NO_LEDS"],
+ "progen": {
+ "target": "beetle",
+ "uvision5": {
+ "template": ["uvision5_arm_beetle_soc.uvproj.tmpl"]
+ }
+ },
+ "device_has": ["ANALOGIN", "CLCD", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SLEEP", "SPI"],
+ "features": ["BLE"],
+ "release_versions": ["2", "5"]
+ },
+ "RZ_A1H": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-A9",
+ "program_cycle_s": 2,
+ "extra_labels": ["RENESAS", "MBRZA1H"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {
+ "target": "gr-peach",
+ "iar": {
+ "template": ["iar_rz_a1h.ewp.tmpl"]
+ }
+ },
+ "device_has": ["ANALOGIN", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "VK_RZ_A1H": {
+ "inherits": ["Target"],
+ "core": "Cortex-A9",
+ "extra_labels": ["RENESAS", "VKRZA1H"],
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "default_toolchain": "ARM",
+ "progen": {
+ "target": "vk-rza1h",
+ "iar": {
+ "template": ["iar_rz_a1h.ewp.tmpl"]
+ }
+ },
+ "program_cycle_s": 2,
+ "device_has": ["ANALOGIN", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "features": ["IPV4"],
+ "default_build": "standard",
+ "release_versions": ["2", "5"]
+ },
+ "MAXWSNENV": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "macros": ["__SYSTEM_HFX=24000000"],
+ "extra_labels": ["Maxim", "MAX32610"],
+ "supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
+ "progen": {"target": "maxwsnenv"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MAX32600MBED": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "macros": ["__SYSTEM_HFX=24000000"],
+ "extra_labels": ["Maxim", "MAX32600"],
+ "supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
+ "progen": {"target": "max32600mbed"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "MAX32620HSP": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "extra_labels": ["Maxim", "MAX32620"],
+ "supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
+ "progen": {"target": "max32620hsp"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"]
+ },
+ "EFM32GG_STK3700": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "macros": ["EFM32GG990F1024"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "efm32gg-stk"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32LG_STK3600": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "macros": ["EFM32LG990F256"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "efm32lg-stk"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32WG_STK3800": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "macros": ["EFM32WG990F256"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "efm32wg-stk"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32ZG_STK3200": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "supported_toolchains": ["GCC_ARM", "uARM"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "macros": ["EFM32ZG222F32"],
+ "progen": {
+ "target": "efm32zg-stk"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32HG_STK3400": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "default_toolchain": "uARM",
+ "supported_toolchains": ["GCC_ARM", "uARM"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "macros": ["EFM32HG322F64"],
+ "progen": {
+ "target": "efm32hg-stk"
+ },
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "default_build": "small",
+ "forced_reset_timeout": 2,
+ "release_versions": ["2"]
+ },
+ "EFM32PG_STK3401": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "macros": ["EFM32PG1B200F256GM48"],
+ "extra_labels": ["Silicon_Labs", "EFM32"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
+ "progen": {"target": "efm32pg-stk"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+ "forced_reset_timeout": 2,
+ "release_versions": ["2", "5"]
+ },
+ "WIZWIKI_W7500": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500"],
+ "supported_toolchains": ["uARM", "ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "wizwiki-w7500"},
+ "device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "WIZWIKI_W7500P": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M0",
+ "extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500P"],
+ "supported_toolchains": ["uARM", "ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "wizwiki-w7500p"},
+ "device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "WIZWIKI_W7500ECO": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "progen": {"target": "wizwiki_w7500eco"},
+ "extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500ECO"],
+ "supported_toolchains": ["uARM", "ARM"],
+ "device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2"]
+ },
+ "SAMR21G18A": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "macros": ["__SAMR21G18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "extra_labels": ["Atmel", "SAM_CortexM0P", "SAMR21"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "samr21g18a"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "release_versions": ["2"]
+ },
+ "SAMD21J18A": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "macros": ["__SAMD21J18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "extra_labels": ["Atmel", "SAM_CortexM0P", "SAMD21"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "samd21j18a"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "release_versions": ["2"]
+ },
+ "SAMD21G18A": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "macros": ["__SAMD21G18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "extra_labels": ["Atmel", "SAM_CortexM0P", "SAMD21"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "samd21g18a"},
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "release_versions": ["2"]
+ },
+ "SAML21J18A": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0+",
+ "macros": ["__SAML21J18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "extra_labels": ["Atmel", "SAM_CortexM0P", "SAML21"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "progen": {"target": "samr21j18a"},
+ "progen_target": "samr21j18a",
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"]
+ },
+ "SAMG55J19": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4",
+ "extra_labels": ["Atmel", "SAM_CortexM4", "SAMG55"],
+ "macros": ["__SAMG55J19__", "BOARD=75", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+ "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+ "default_toolchain": "ARM",
+ "progen": {"target": "samg55j19"},
+ "progen_target": "samg55j19",
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "default_build": "standard"
+ },
+ "MCU_NRF51_UNIFIED": {
+ "inherits": ["Target"],
+ "core": "Cortex-M0",
+ "OVERRIDE_BOOTLOADER_FILENAME": "nrf51822_bootloader.hex",
+ "macros": [
+ "NRF51",
+ "TARGET_NRF51822",
+ "BLE_STACK_SUPPORT_REQD",
+ "SOFTDEVICE_PRESENT",
+ "S130",
+ "TARGET_MCU_NRF51822"
+ ],
+ "MERGE_BOOTLOADER": false,
+ "extra_labels": ["NORDIC", "MCU_NRF51", "MCU_NRF51822_UNIFIED", "NRF5"],
+ "OUTPUT_EXT": "hex",
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "public": false,
+ "MERGE_SOFT_DEVICE": true,
+ "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+ {
+ "boot": "",
+ "name": "s130_nrf51_2.0.0_softdevice.hex",
+ "offset": 110592
+ }
+ ],
+ "detect_code": ["1070"],
+ "post_binary_hook": {
+ "function": "MCU_NRF51Code.binary_hook",
+ "toolchains": ["ARM_STD", "GCC_ARM", "IAR"]
+ },
+ "program_cycle_s": 6,
+ "features": ["BLE"],
+ "config":{
+ "lf_clock_src": {
+ "value": "NRF_LF_SRC_XTAL",
+ "macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_SRC"
+ },
+ "uart_hwfc": {
+ "help": "Value: 1 for enable, 0 for disable",
+ "value": 1,
+ "macro_name": "MBED_CONF_NORDIC_UART_HWFC"
+ }
+ }
+ },
+ "MCU_NRF51_32K_UNIFIED": {
+ "inherits": ["MCU_NRF51_UNIFIED"],
+ "extra_labels_add": ["MCU_NORDIC_32K", "MCU_NRF51_32K"],
+ "macros_add": ["TARGET_MCU_NORDIC_32K", "TARGET_MCU_NRF51_32K"],
+ "public": false
+ },
+ "NRF51_DK": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF51_32K_UNIFIED"],
+ "progen": {"target": "nrf51-dk"},
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "release_versions": ["2", "5"]
+ },
+ "MCU_NRF52": {
+ "inherits": ["Target"],
+ "core": "Cortex-M4F",
+ "macros": ["NRF52", "TARGET_NRF52832", "BLE_STACK_SUPPORT_REQD", "SOFTDEVICE_PRESENT", "S132"],
+ "extra_labels": ["NORDIC", "MCU_NRF52", "MCU_NRF52832", "NRF5"],
+ "OUTPUT_EXT": "hex",
+ "is_disk_virtual": true,
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "public": false,
+ "detect_code": ["1101"],
+ "program_cycle_s": 6,
+ "MERGE_SOFT_DEVICE": true,
+ "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+ {
+ "boot": "",
+ "name": "s132_nrf52_2.0.0_softdevice.hex",
+ "offset": 114688
+ }
+ ],
+ "post_binary_hook": {
+ "function": "MCU_NRF51Code.binary_hook",
+ "toolchains": ["ARM_STD", "GCC_ARM", "IAR"]
+ },
+ "MERGE_BOOTLOADER": false,
+ "features": ["BLE"],
+ "config":{
+ "lf_clock_src": {
+ "value": "NRF_LF_SRC_XTAL",
+ "macro_name": "MBED_CONF_NORDIC_NRF_LF_CLOCK_SRC"
+ },
+ "uart_hwfc": {
+ "help": "Value: 1 for enable, 0 for disable",
+ "value": 1,
+ "macro_name": "MBED_CONF_NORDIC_UART_HWFC"
+ }
+ }
+ },
+ "NRF52_DK": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF52"],
+ "progen": {"target": "nrf52-dk"},
+ "macros_add": [
+ "BOARD_PCA10040",
+ "NRF52_PAN_12",
+ "NRF52_PAN_15",
+ "NRF52_PAN_58",
+ "NRF52_PAN_55",
+ "NRF52_PAN_54",
+ "NRF52_PAN_31",
+ "NRF52_PAN_30",
+ "NRF52_PAN_51",
+ "NRF52_PAN_36",
+ "NRF52_PAN_53",
+ "S132",
+ "CONFIG_GPIO_AS_PINRESET",
+ "BLE_STACK_SUPPORT_REQD",
+ "SWI_DISABLE0",
+ "NRF52_PAN_20",
+ "NRF52_PAN_64",
+ "NRF52_PAN_62",
+ "NRF52_PAN_63"
+ ],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "release_versions": ["2", "5"]
+ },
+ "DELTA_DFBM_NQ620": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_NRF52"],
+ "progen": {"target": "dfbm-nq620"},
+ "macros_add": [
+ "BOARD_PCA10040",
+ "NRF52_PAN_12",
+ "NRF52_PAN_15",
+ "NRF52_PAN_58",
+ "NRF52_PAN_55",
+ "NRF52_PAN_54",
+ "NRF52_PAN_31",
+ "NRF52_PAN_30",
+ "NRF52_PAN_51",
+ "NRF52_PAN_36",
+ "NRF52_PAN_53",
+ "S132",
+ "CONFIG_GPIO_AS_PINRESET",
+ "BLE_STACK_SUPPORT_REQD",
+ "SWI_DISABLE0",
+ "NRF52_PAN_20",
+ "NRF52_PAN_64",
+ "NRF52_PAN_62",
+ "NRF52_PAN_63"
+ ],
+ "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "release_versions": ["2", "5"]
+ },
+ "BLUEPILL_F103C8": {
+ "core": "Cortex-M3",
+ "default_toolchain": "GCC_ARM",
+ "extra_labels": ["STM", "STM32F1", "STM32F103C8"],
+ "supported_toolchains": ["GCC_ARM"],
+ "inherits": ["Target"],
+ "progen": {"target": "bluepill-f103c8"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+ },
+ "NUMAKER_PFM_NUC472": {
+ "core": "Cortex-M4F",
+ "default_toolchain": "ARM",
+ "extra_labels": ["NUVOTON", "NUC472", "NUMAKER_PFM_NUC472"],
+ "macros": ["MBEDTLS_ENTROPY_HARDWARE_ALT"],
+ "is_disk_virtual": true,
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "inherits": ["Target"],
+ "progen": {"target": "numaker-pfm-nuc472"},
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+ "features": ["IPV4"],
+ "release_versions": ["2", "5"]
+ },
+ "NCS36510": {
+ "inherits": ["Target"],
+ "core": "Cortex-M3",
+ "extra_labels": ["ONSEMI"],
+ "post_binary_hook": {"function": "NCS36510TargetCode.ncs36510_addfib"},
+ "macros": ["REVD", "CM3", "CPU_NCS36510", "TARGET_NCS36510"],
+ "progen": {"target": "ncs36510"},
+ "progen_target": "ncs36510",
+ "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+ "device_has": ["ANALOGIN", "SERIAL", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI"],
+ "release_versions": ["2", "5"]
+ }
+}
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.S --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.S Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,342 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f401xe.s +;* Author : MCD Application Team +;* Version : V2.1.0 +;* Date : 19-June-2014 +;* Description : STM32F401xe devices vector table for MDK-ARM_STD toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + + +__initial_sp EQU 0x20018000 ; Top of RAM + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD 0 ; Reserved + DCD SDIO_IRQHandler ; SDIO + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FPU_IRQHandler ; FPU + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI4_IRQHandler ; SPI4 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT SPI4_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_TIM10_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +OTG_FS_WKUP_IRQHandler +DMA1_Stream7_IRQHandler +SDIO_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +OTG_FS_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +FPU_IRQHandler +SPI4_IRQHandler + + B . + + ENDP + + ALIGN + END
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f401xe.sct
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f401xe.sct Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F401RE: 512KB FLASH + 96KB SRAM
+LR_IROM1 0x08000000 0x80000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x80000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 101 vectors = 404 bytes (0x194) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x194) (0x18000-0x194) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.cpp Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f4xx.h" +#include "cmsis_nvic.h" + +#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM
+#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+ uint32_t *vectors = (uint32_t *)SCB->VTOR;
+ uint32_t i;
+
+ // Copy and switch to dynamic vectors if the first time called
+ if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+ uint32_t *old_vectors = vectors;
+ vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+ for (i=0; i<NVIC_NUM_VECTORS; i++) {
+ vectors[i] = old_vectors[i];
+ }
+ SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+ }
+ vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+ uint32_t *vectors = (uint32_t*)SCB->VTOR;
+ return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/cmsis_nvic.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F401RE
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 85 vectors = 340 bytes from 0x40 to ...
+// Total: 101 vectors = 404 bytes (0x194) to be reserved in RAM
+#define NVIC_NUM_VECTORS 101
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,142 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.c
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#include "hal_tick.h"
+
+TIM_HandleTypeDef TimMasterHandle;
+uint32_t PreviousVal = 0;
+
+void us_ticker_irq_handler(void);
+
+void timer_irq_handler(void) {
+ // Channel 1 for mbed timeout
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
+ if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC1) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+ us_ticker_irq_handler();
+ }
+ }
+
+ // Channel 2 for HAL tick
+ if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC2) == SET) {
+ if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC2) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
+ uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
+ if ((val - PreviousVal) >= HAL_TICK_DELAY) {
+ // Increment HAL variable
+ HAL_IncTick();
+ // Prepare next interrupt
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
+ PreviousVal = val;
+#if 0 // For DEBUG only
+ HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
+#endif
+ }
+ }
+ }
+}
+
+// Reconfigure the HAL tick using a standard timer instead of systick.
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
+ // Enable timer clock
+ TIM_MST_RCC;
+
+ // Reset timer
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+
+ // Update the SystemCoreClock variable
+ SystemCoreClockUpdate();
+
+ // Configure time base
+ TimMasterHandle.Instance = TIM_MST;
+ TimMasterHandle.Init.Period = 0xFFFFFFFF;
+ TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
+ TimMasterHandle.Init.ClockDivision = 0;
+ TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ TimMasterHandle.Init.RepetitionCounter = 0;
+ HAL_TIM_OC_Init(&TimMasterHandle);
+
+ NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
+ NVIC_EnableIRQ(TIM_MST_IRQ);
+
+ // Channel 1 for mbed timeout
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
+
+ // Channel 2 for HAL tick
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
+ PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+#if 0 // For DEBUG only
+ __GPIOB_CLK_ENABLE();
+ GPIO_InitTypeDef GPIO_InitStruct;
+ GPIO_InitStruct.Pin = GPIO_PIN_6;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+#endif
+
+ return HAL_OK;
+}
+
+void HAL_SuspendTick(void)
+{
+ TimMasterHandle.Instance = TIM_MST;
+
+ // Disable HAL tick and us_ticker update interrupts (used for 32 bit counter)
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+}
+
+void HAL_ResumeTick(void)
+{
+ TimMasterHandle.Instance = TIM_MST;
+
+ // Enable HAL tick and us_ticker update interrupts (used for 32 bit counter)
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/hal_tick.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f4xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM5
+#define TIM_MST_IRQ TIM5_IRQn
+#define TIM_MST_RCC __TIM5_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f401xc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f401xc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,4807 @@
+/**
+ ******************************************************************************
+ * @file stm32f401xc.h
+ * @author MCD Application Team
+ * @version V2.5.0
+ * @date 22-April-2016
+ * @brief CMSIS STM32F401xCxx Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - peripherals registers declarations and bits definition
+ * - Macros to access peripheral's registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f401xc
+ * @{
+ */
+
+#ifndef __STM32F401xC_H
+#define __STM32F401xC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+#ifndef __FPU_PRESENT
+#define __FPU_PRESENT 1U /*!< FPU present */
+#endif /* __FPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ SPI4_IRQn = 84 /*!< SPI4 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+ uint32_t RESERVED7[1]; /*!< Reserved, 0x88 */
+ __IO uint32_t DCKCFGR; /*!< RCC DCKCFGR configuration register, Address offset: 0x8C */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /* !< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE 0x08000000U /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE 0x20000000U /*!< SRAM1(64 KB) base address in the alias region */
+#define PERIPH_BASE 0x40000000U /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE 0x40024000U /*!< Backup SRAM(4 KB) base address in the alias region */
+#define SRAM1_BB_BASE 0x22000000U /*!< SRAM1(64 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE 0x42000000U /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE 0x42480000U /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END 0x0803FFFFU /*!< FLASH end address */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000U)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000U)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000U)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000U)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400U)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800U)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00U)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800U)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00U)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000U)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400U)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800U)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00U)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000U)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400U)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400U)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800U)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00U)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000U)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000U)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000U)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400U)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000U)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300U)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00U)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000U)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400U)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800U)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00U)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000U)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400U)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800U)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000U)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400U)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800U)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00U)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000U)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00U)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000U)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800U)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00U)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000U)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010U)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028U)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040U)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058U)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070U)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088U)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0U)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8U)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400U)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010U)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028U)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040U)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058U)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070U)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088U)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0U)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8U)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE 0xE0042000U
+
+/*!< USB registers base address */
+#define USB_OTG_FS_PERIPH_BASE 0x50000000U
+
+#define USB_OTG_GLOBAL_BASE 0x000U
+#define USB_OTG_DEVICE_BASE 0x800U
+#define USB_OTG_IN_ENDPOINT_BASE 0x900U
+#define USB_OTG_OUT_ENDPOINT_BASE 0xB00U
+#define USB_OTG_EP_REG_SIZE 0x20U
+#define USB_OTG_HOST_BASE 0x400U
+#define USB_OTG_HOST_PORT_BASE 0x440U
+#define USB_OTG_HOST_CHANNEL_BASE 0x500U
+#define USB_OTG_HOST_CHANNEL_SIZE 0x20U
+#define USB_OTG_PCGCCTL_BASE 0xE00U
+#define USB_OTG_FIFO_BASE 0x1000U
+#define USB_OTG_FIFO_SIZE 0x1000U
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD 0x00000001U /*!<Analog watchdog flag */
+#define ADC_SR_EOC 0x00000002U /*!<End of conversion */
+#define ADC_SR_JEOC 0x00000004U /*!<Injected channel end of conversion */
+#define ADC_SR_JSTRT 0x00000008U /*!<Injected channel Start flag */
+#define ADC_SR_STRT 0x00000010U /*!<Regular channel Start flag */
+#define ADC_SR_OVR 0x00000020U /*!<Overrun flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH 0x0000001FU /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 0x00000001U /*!<Bit 0 */
+#define ADC_CR1_AWDCH_1 0x00000002U /*!<Bit 1 */
+#define ADC_CR1_AWDCH_2 0x00000004U /*!<Bit 2 */
+#define ADC_CR1_AWDCH_3 0x00000008U /*!<Bit 3 */
+#define ADC_CR1_AWDCH_4 0x00000010U /*!<Bit 4 */
+#define ADC_CR1_EOCIE 0x00000020U /*!<Interrupt enable for EOC */
+#define ADC_CR1_AWDIE 0x00000040U /*!<AAnalog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE 0x00000080U /*!<Interrupt enable for injected channels */
+#define ADC_CR1_SCAN 0x00000100U /*!<Scan mode */
+#define ADC_CR1_AWDSGL 0x00000200U /*!<Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO 0x00000400U /*!<Automatic injected group conversion */
+#define ADC_CR1_DISCEN 0x00000800U /*!<Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN 0x00001000U /*!<Discontinuous mode on injected channels */
+#define ADC_CR1_DISCNUM 0x0000E000U /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 0x00002000U /*!<Bit 0 */
+#define ADC_CR1_DISCNUM_1 0x00004000U /*!<Bit 1 */
+#define ADC_CR1_DISCNUM_2 0x00008000U /*!<Bit 2 */
+#define ADC_CR1_JAWDEN 0x00400000U /*!<Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN 0x00800000U /*!<Analog watchdog enable on regular channels */
+#define ADC_CR1_RES 0x03000000U /*!<RES[2:0] bits (Resolution) */
+#define ADC_CR1_RES_0 0x01000000U /*!<Bit 0 */
+#define ADC_CR1_RES_1 0x02000000U /*!<Bit 1 */
+#define ADC_CR1_OVRIE 0x04000000U /*!<overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON 0x00000001U /*!<A/D Converter ON / OFF */
+#define ADC_CR2_CONT 0x00000002U /*!<Continuous Conversion */
+#define ADC_CR2_DMA 0x00000100U /*!<Direct Memory access mode */
+#define ADC_CR2_DDS 0x00000200U /*!<DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS 0x00000400U /*!<End of conversion selection */
+#define ADC_CR2_ALIGN 0x00000800U /*!<Data Alignment */
+#define ADC_CR2_JEXTSEL 0x000F0000U /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 0x00010000U /*!<Bit 0 */
+#define ADC_CR2_JEXTSEL_1 0x00020000U /*!<Bit 1 */
+#define ADC_CR2_JEXTSEL_2 0x00040000U /*!<Bit 2 */
+#define ADC_CR2_JEXTSEL_3 0x00080000U /*!<Bit 3 */
+#define ADC_CR2_JEXTEN 0x00300000U /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define ADC_CR2_JEXTEN_0 0x00100000U /*!<Bit 0 */
+#define ADC_CR2_JEXTEN_1 0x00200000U /*!<Bit 1 */
+#define ADC_CR2_JSWSTART 0x00400000U /*!<Start Conversion of injected channels */
+#define ADC_CR2_EXTSEL 0x0F000000U /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 0x01000000U /*!<Bit 0 */
+#define ADC_CR2_EXTSEL_1 0x02000000U /*!<Bit 1 */
+#define ADC_CR2_EXTSEL_2 0x04000000U /*!<Bit 2 */
+#define ADC_CR2_EXTSEL_3 0x08000000U /*!<Bit 3 */
+#define ADC_CR2_EXTEN 0x30000000U /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define ADC_CR2_EXTEN_0 0x10000000U /*!<Bit 0 */
+#define ADC_CR2_EXTEN_1 0x20000000U /*!<Bit 1 */
+#define ADC_CR2_SWSTART 0x40000000U /*!<Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 0x00000007U /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 0x00000001U /*!<Bit 0 */
+#define ADC_SMPR1_SMP10_1 0x00000002U /*!<Bit 1 */
+#define ADC_SMPR1_SMP10_2 0x00000004U /*!<Bit 2 */
+#define ADC_SMPR1_SMP11 0x00000038U /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 0x00000008U /*!<Bit 0 */
+#define ADC_SMPR1_SMP11_1 0x00000010U /*!<Bit 1 */
+#define ADC_SMPR1_SMP11_2 0x00000020U /*!<Bit 2 */
+#define ADC_SMPR1_SMP12 0x000001C0U /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 0x00000040U /*!<Bit 0 */
+#define ADC_SMPR1_SMP12_1 0x00000080U /*!<Bit 1 */
+#define ADC_SMPR1_SMP12_2 0x00000100U /*!<Bit 2 */
+#define ADC_SMPR1_SMP13 0x00000E00U /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 0x00000200U /*!<Bit 0 */
+#define ADC_SMPR1_SMP13_1 0x00000400U /*!<Bit 1 */
+#define ADC_SMPR1_SMP13_2 0x00000800U /*!<Bit 2 */
+#define ADC_SMPR1_SMP14 0x00007000U /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 0x00001000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP14_1 0x00002000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP14_2 0x00004000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP15 0x00038000U /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 0x00008000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP15_1 0x00010000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP15_2 0x00020000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP16 0x001C0000U /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 0x00040000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP16_1 0x00080000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP16_2 0x00100000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP17 0x00E00000U /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 0x00200000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP17_1 0x00400000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP17_2 0x00800000U /*!<Bit 2 */
+#define ADC_SMPR1_SMP18 0x07000000U /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR1_SMP18_0 0x01000000U /*!<Bit 0 */
+#define ADC_SMPR1_SMP18_1 0x02000000U /*!<Bit 1 */
+#define ADC_SMPR1_SMP18_2 0x04000000U /*!<Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 0x00000007U /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 0x00000001U /*!<Bit 0 */
+#define ADC_SMPR2_SMP0_1 0x00000002U /*!<Bit 1 */
+#define ADC_SMPR2_SMP0_2 0x00000004U /*!<Bit 2 */
+#define ADC_SMPR2_SMP1 0x00000038U /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 0x00000008U /*!<Bit 0 */
+#define ADC_SMPR2_SMP1_1 0x00000010U /*!<Bit 1 */
+#define ADC_SMPR2_SMP1_2 0x00000020U /*!<Bit 2 */
+#define ADC_SMPR2_SMP2 0x000001C0U /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 0x00000040U /*!<Bit 0 */
+#define ADC_SMPR2_SMP2_1 0x00000080U /*!<Bit 1 */
+#define ADC_SMPR2_SMP2_2 0x00000100U /*!<Bit 2 */
+#define ADC_SMPR2_SMP3 0x00000E00U /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 0x00000200U /*!<Bit 0 */
+#define ADC_SMPR2_SMP3_1 0x00000400U /*!<Bit 1 */
+#define ADC_SMPR2_SMP3_2 0x00000800U /*!<Bit 2 */
+#define ADC_SMPR2_SMP4 0x00007000U /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 0x00001000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP4_1 0x00002000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP4_2 0x00004000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP5 0x00038000U /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 0x00008000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP5_1 0x00010000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP5_2 0x00020000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP6 0x001C0000U /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 0x00040000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP6_1 0x00080000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP6_2 0x00100000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP7 0x00E00000U /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 0x00200000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP7_1 0x00400000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP7_2 0x00800000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP8 0x07000000U /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 0x01000000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP8_1 0x02000000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP8_2 0x04000000U /*!<Bit 2 */
+#define ADC_SMPR2_SMP9 0x38000000U /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 0x08000000U /*!<Bit 0 */
+#define ADC_SMPR2_SMP9_1 0x10000000U /*!<Bit 1 */
+#define ADC_SMPR2_SMP9_2 0x20000000U /*!<Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 0x0FFFU /*!<Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 0x0FFFU /*!<Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 0x0FFFU /*!<Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 0x0FFFU /*!<Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT 0x0FFFU /*!<Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT 0x0FFFU /*!<Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 0x0000001FU /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 0x00000001U /*!<Bit 0 */
+#define ADC_SQR1_SQ13_1 0x00000002U /*!<Bit 1 */
+#define ADC_SQR1_SQ13_2 0x00000004U /*!<Bit 2 */
+#define ADC_SQR1_SQ13_3 0x00000008U /*!<Bit 3 */
+#define ADC_SQR1_SQ13_4 0x00000010U /*!<Bit 4 */
+#define ADC_SQR1_SQ14 0x000003E0U /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 0x00000020U /*!<Bit 0 */
+#define ADC_SQR1_SQ14_1 0x00000040U /*!<Bit 1 */
+#define ADC_SQR1_SQ14_2 0x00000080U /*!<Bit 2 */
+#define ADC_SQR1_SQ14_3 0x00000100U /*!<Bit 3 */
+#define ADC_SQR1_SQ14_4 0x00000200U /*!<Bit 4 */
+#define ADC_SQR1_SQ15 0x00007C00U /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 0x00000400U /*!<Bit 0 */
+#define ADC_SQR1_SQ15_1 0x00000800U /*!<Bit 1 */
+#define ADC_SQR1_SQ15_2 0x00001000U /*!<Bit 2 */
+#define ADC_SQR1_SQ15_3 0x00002000U /*!<Bit 3 */
+#define ADC_SQR1_SQ15_4 0x00004000U /*!<Bit 4 */
+#define ADC_SQR1_SQ16 0x000F8000U /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 0x00008000U /*!<Bit 0 */
+#define ADC_SQR1_SQ16_1 0x00010000U /*!<Bit 1 */
+#define ADC_SQR1_SQ16_2 0x00020000U /*!<Bit 2 */
+#define ADC_SQR1_SQ16_3 0x00040000U /*!<Bit 3 */
+#define ADC_SQR1_SQ16_4 0x00080000U /*!<Bit 4 */
+#define ADC_SQR1_L 0x00F00000U /*!<L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 0x00100000U /*!<Bit 0 */
+#define ADC_SQR1_L_1 0x00200000U /*!<Bit 1 */
+#define ADC_SQR1_L_2 0x00400000U /*!<Bit 2 */
+#define ADC_SQR1_L_3 0x00800000U /*!<Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 0x0000001FU /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 0x00000001U /*!<Bit 0 */
+#define ADC_SQR2_SQ7_1 0x00000002U /*!<Bit 1 */
+#define ADC_SQR2_SQ7_2 0x00000004U /*!<Bit 2 */
+#define ADC_SQR2_SQ7_3 0x00000008U /*!<Bit 3 */
+#define ADC_SQR2_SQ7_4 0x00000010U /*!<Bit 4 */
+#define ADC_SQR2_SQ8 0x000003E0U /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 0x00000020U /*!<Bit 0 */
+#define ADC_SQR2_SQ8_1 0x00000040U /*!<Bit 1 */
+#define ADC_SQR2_SQ8_2 0x00000080U /*!<Bit 2 */
+#define ADC_SQR2_SQ8_3 0x00000100U /*!<Bit 3 */
+#define ADC_SQR2_SQ8_4 0x00000200U /*!<Bit 4 */
+#define ADC_SQR2_SQ9 0x00007C00U /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 0x00000400U /*!<Bit 0 */
+#define ADC_SQR2_SQ9_1 0x00000800U /*!<Bit 1 */
+#define ADC_SQR2_SQ9_2 0x00001000U /*!<Bit 2 */
+#define ADC_SQR2_SQ9_3 0x00002000U /*!<Bit 3 */
+#define ADC_SQR2_SQ9_4 0x00004000U /*!<Bit 4 */
+#define ADC_SQR2_SQ10 0x000F8000U /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 0x00008000U /*!<Bit 0 */
+#define ADC_SQR2_SQ10_1 0x00010000U /*!<Bit 1 */
+#define ADC_SQR2_SQ10_2 0x00020000U /*!<Bit 2 */
+#define ADC_SQR2_SQ10_3 0x00040000U /*!<Bit 3 */
+#define ADC_SQR2_SQ10_4 0x00080000U /*!<Bit 4 */
+#define ADC_SQR2_SQ11 0x01F00000U /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 0x00100000U /*!<Bit 0 */
+#define ADC_SQR2_SQ11_1 0x00200000U /*!<Bit 1 */
+#define ADC_SQR2_SQ11_2 0x00400000U /*!<Bit 2 */
+#define ADC_SQR2_SQ11_3 0x00800000U /*!<Bit 3 */
+#define ADC_SQR2_SQ11_4 0x01000000U /*!<Bit 4 */
+#define ADC_SQR2_SQ12 0x3E000000U /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 0x02000000U /*!<Bit 0 */
+#define ADC_SQR2_SQ12_1 0x04000000U /*!<Bit 1 */
+#define ADC_SQR2_SQ12_2 0x08000000U /*!<Bit 2 */
+#define ADC_SQR2_SQ12_3 0x10000000U /*!<Bit 3 */
+#define ADC_SQR2_SQ12_4 0x20000000U /*!<Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 0x0000001FU /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 0x00000001U /*!<Bit 0 */
+#define ADC_SQR3_SQ1_1 0x00000002U /*!<Bit 1 */
+#define ADC_SQR3_SQ1_2 0x00000004U /*!<Bit 2 */
+#define ADC_SQR3_SQ1_3 0x00000008U /*!<Bit 3 */
+#define ADC_SQR3_SQ1_4 0x00000010U /*!<Bit 4 */
+#define ADC_SQR3_SQ2 0x000003E0U /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 0x00000020U /*!<Bit 0 */
+#define ADC_SQR3_SQ2_1 0x00000040U /*!<Bit 1 */
+#define ADC_SQR3_SQ2_2 0x00000080U /*!<Bit 2 */
+#define ADC_SQR3_SQ2_3 0x00000100U /*!<Bit 3 */
+#define ADC_SQR3_SQ2_4 0x00000200U /*!<Bit 4 */
+#define ADC_SQR3_SQ3 0x00007C00U /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 0x00000400U /*!<Bit 0 */
+#define ADC_SQR3_SQ3_1 0x00000800U /*!<Bit 1 */
+#define ADC_SQR3_SQ3_2 0x00001000U /*!<Bit 2 */
+#define ADC_SQR3_SQ3_3 0x00002000U /*!<Bit 3 */
+#define ADC_SQR3_SQ3_4 0x00004000U /*!<Bit 4 */
+#define ADC_SQR3_SQ4 0x000F8000U /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 0x00008000U /*!<Bit 0 */
+#define ADC_SQR3_SQ4_1 0x00010000U /*!<Bit 1 */
+#define ADC_SQR3_SQ4_2 0x00020000U /*!<Bit 2 */
+#define ADC_SQR3_SQ4_3 0x00040000U /*!<Bit 3 */
+#define ADC_SQR3_SQ4_4 0x00080000U /*!<Bit 4 */
+#define ADC_SQR3_SQ5 0x01F00000U /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 0x00100000U /*!<Bit 0 */
+#define ADC_SQR3_SQ5_1 0x00200000U /*!<Bit 1 */
+#define ADC_SQR3_SQ5_2 0x00400000U /*!<Bit 2 */
+#define ADC_SQR3_SQ5_3 0x00800000U /*!<Bit 3 */
+#define ADC_SQR3_SQ5_4 0x01000000U /*!<Bit 4 */
+#define ADC_SQR3_SQ6 0x3E000000U /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 0x02000000U /*!<Bit 0 */
+#define ADC_SQR3_SQ6_1 0x04000000U /*!<Bit 1 */
+#define ADC_SQR3_SQ6_2 0x08000000U /*!<Bit 2 */
+#define ADC_SQR3_SQ6_3 0x10000000U /*!<Bit 3 */
+#define ADC_SQR3_SQ6_4 0x20000000U /*!<Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 0x0000001FU /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 0x00000001U /*!<Bit 0 */
+#define ADC_JSQR_JSQ1_1 0x00000002U /*!<Bit 1 */
+#define ADC_JSQR_JSQ1_2 0x00000004U /*!<Bit 2 */
+#define ADC_JSQR_JSQ1_3 0x00000008U /*!<Bit 3 */
+#define ADC_JSQR_JSQ1_4 0x00000010U /*!<Bit 4 */
+#define ADC_JSQR_JSQ2 0x000003E0U /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 0x00000020U /*!<Bit 0 */
+#define ADC_JSQR_JSQ2_1 0x00000040U /*!<Bit 1 */
+#define ADC_JSQR_JSQ2_2 0x00000080U /*!<Bit 2 */
+#define ADC_JSQR_JSQ2_3 0x00000100U /*!<Bit 3 */
+#define ADC_JSQR_JSQ2_4 0x00000200U /*!<Bit 4 */
+#define ADC_JSQR_JSQ3 0x00007C00U /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 0x00000400U /*!<Bit 0 */
+#define ADC_JSQR_JSQ3_1 0x00000800U /*!<Bit 1 */
+#define ADC_JSQR_JSQ3_2 0x00001000U /*!<Bit 2 */
+#define ADC_JSQR_JSQ3_3 0x00002000U /*!<Bit 3 */
+#define ADC_JSQR_JSQ3_4 0x00004000U /*!<Bit 4 */
+#define ADC_JSQR_JSQ4 0x000F8000U /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 0x00008000U /*!<Bit 0 */
+#define ADC_JSQR_JSQ4_1 0x00010000U /*!<Bit 1 */
+#define ADC_JSQR_JSQ4_2 0x00020000U /*!<Bit 2 */
+#define ADC_JSQR_JSQ4_3 0x00040000U /*!<Bit 3 */
+#define ADC_JSQR_JSQ4_4 0x00080000U /*!<Bit 4 */
+#define ADC_JSQR_JL 0x00300000U /*!<JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 0x00100000U /*!<Bit 0 */
+#define ADC_JSQR_JL_1 0x00200000U /*!<Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA 0xFFFFU /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA 0xFFFFU /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA 0xFFFFU /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA 0xFFFFU /*!<Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA 0x0000FFFFU /*!<Regular data */
+#define ADC_DR_ADC2DATA 0xFFFF0000U /*!<ADC2 data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 0x00000001U /*!<ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 0x00000002U /*!<ADC1 End of conversion */
+#define ADC_CSR_JEOC1 0x00000004U /*!<ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 0x00000008U /*!<ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 0x00000010U /*!<ADC1 Regular channel Start flag */
+#define ADC_CSR_OVR1 0x00000020U /*!<ADC1 DMA overrun flag */
+#define ADC_CSR_AWD2 0x00000100U /*!<ADC2 Analog watchdog flag */
+#define ADC_CSR_EOC2 0x00000200U /*!<ADC2 End of conversion */
+#define ADC_CSR_JEOC2 0x00000400U /*!<ADC2 Injected channel end of conversion */
+#define ADC_CSR_JSTRT2 0x00000800U /*!<ADC2 Injected channel Start flag */
+#define ADC_CSR_STRT2 0x00001000U /*!<ADC2 Regular channel Start flag */
+#define ADC_CSR_OVR2 0x00002000U /*!<ADC2 DMA overrun flag */
+#define ADC_CSR_AWD3 0x00010000U /*!<ADC3 Analog watchdog flag */
+#define ADC_CSR_EOC3 0x00020000U /*!<ADC3 End of conversion */
+#define ADC_CSR_JEOC3 0x00040000U /*!<ADC3 Injected channel end of conversion */
+#define ADC_CSR_JSTRT3 0x00080000U /*!<ADC3 Injected channel Start flag */
+#define ADC_CSR_STRT3 0x00100000U /*!<ADC3 Regular channel Start flag */
+#define ADC_CSR_OVR3 0x00200000U /*!<ADC3 DMA overrun flag */
+
+/* Legacy defines */
+#define ADC_CSR_DOVR1 ADC_CSR_OVR1
+#define ADC_CSR_DOVR2 ADC_CSR_OVR2
+#define ADC_CSR_DOVR3 ADC_CSR_OVR3
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_MULTI 0x0000001FU /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define ADC_CCR_MULTI_0 0x00000001U /*!<Bit 0 */
+#define ADC_CCR_MULTI_1 0x00000002U /*!<Bit 1 */
+#define ADC_CCR_MULTI_2 0x00000004U /*!<Bit 2 */
+#define ADC_CCR_MULTI_3 0x00000008U /*!<Bit 3 */
+#define ADC_CCR_MULTI_4 0x00000010U /*!<Bit 4 */
+#define ADC_CCR_DELAY 0x00000F00U /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define ADC_CCR_DELAY_0 0x00000100U /*!<Bit 0 */
+#define ADC_CCR_DELAY_1 0x00000200U /*!<Bit 1 */
+#define ADC_CCR_DELAY_2 0x00000400U /*!<Bit 2 */
+#define ADC_CCR_DELAY_3 0x00000800U /*!<Bit 3 */
+#define ADC_CCR_DDS 0x00002000U /*!<DMA disable selection (Multi-ADC mode) */
+#define ADC_CCR_DMA 0x0000C000U /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define ADC_CCR_DMA_0 0x00004000U /*!<Bit 0 */
+#define ADC_CCR_DMA_1 0x00008000U /*!<Bit 1 */
+#define ADC_CCR_ADCPRE 0x00030000U /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define ADC_CCR_ADCPRE_0 0x00010000U /*!<Bit 0 */
+#define ADC_CCR_ADCPRE_1 0x00020000U /*!<Bit 1 */
+#define ADC_CCR_VBATE 0x00400000U /*!<VBAT Enable */
+#define ADC_CCR_TSVREFE 0x00800000U /*!<Temperature Sensor and VREFINT Enable */
+
+/******************* Bit definition for ADC_CDR register ********************/
+#define ADC_CDR_DATA1 0x0000FFFFU /*!<1st data of a pair of regular conversions */
+#define ADC_CDR_DATA2 0xFFFF0000U /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR 0xFFFFFFFFU /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR 0xFFU /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET 0x01U /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DMA_SxCR register *****************/
+#define DMA_SxCR_CHSEL 0x0E000000U
+#define DMA_SxCR_CHSEL_0 0x02000000U
+#define DMA_SxCR_CHSEL_1 0x04000000U
+#define DMA_SxCR_CHSEL_2 0x08000000U
+#define DMA_SxCR_MBURST 0x01800000U
+#define DMA_SxCR_MBURST_0 0x00800000U
+#define DMA_SxCR_MBURST_1 0x01000000U
+#define DMA_SxCR_PBURST 0x00600000U
+#define DMA_SxCR_PBURST_0 0x00200000U
+#define DMA_SxCR_PBURST_1 0x00400000U
+#define DMA_SxCR_CT 0x00080000U
+#define DMA_SxCR_DBM 0x00040000U
+#define DMA_SxCR_PL 0x00030000U
+#define DMA_SxCR_PL_0 0x00010000U
+#define DMA_SxCR_PL_1 0x00020000U
+#define DMA_SxCR_PINCOS 0x00008000U
+#define DMA_SxCR_MSIZE 0x00006000U
+#define DMA_SxCR_MSIZE_0 0x00002000U
+#define DMA_SxCR_MSIZE_1 0x00004000U
+#define DMA_SxCR_PSIZE 0x00001800U
+#define DMA_SxCR_PSIZE_0 0x00000800U
+#define DMA_SxCR_PSIZE_1 0x00001000U
+#define DMA_SxCR_MINC 0x00000400U
+#define DMA_SxCR_PINC 0x00000200U
+#define DMA_SxCR_CIRC 0x00000100U
+#define DMA_SxCR_DIR 0x000000C0U
+#define DMA_SxCR_DIR_0 0x00000040U
+#define DMA_SxCR_DIR_1 0x00000080U
+#define DMA_SxCR_PFCTRL 0x00000020U
+#define DMA_SxCR_TCIE 0x00000010U
+#define DMA_SxCR_HTIE 0x00000008U
+#define DMA_SxCR_TEIE 0x00000004U
+#define DMA_SxCR_DMEIE 0x00000002U
+#define DMA_SxCR_EN 0x00000001U
+
+/* Legacy defines */
+#define DMA_SxCR_ACK 0x00100000U
+
+/******************** Bits definition for DMA_SxCNDTR register **************/
+#define DMA_SxNDT 0x0000FFFFU
+#define DMA_SxNDT_0 0x00000001U
+#define DMA_SxNDT_1 0x00000002U
+#define DMA_SxNDT_2 0x00000004U
+#define DMA_SxNDT_3 0x00000008U
+#define DMA_SxNDT_4 0x00000010U
+#define DMA_SxNDT_5 0x00000020U
+#define DMA_SxNDT_6 0x00000040U
+#define DMA_SxNDT_7 0x00000080U
+#define DMA_SxNDT_8 0x00000100U
+#define DMA_SxNDT_9 0x00000200U
+#define DMA_SxNDT_10 0x00000400U
+#define DMA_SxNDT_11 0x00000800U
+#define DMA_SxNDT_12 0x00001000U
+#define DMA_SxNDT_13 0x00002000U
+#define DMA_SxNDT_14 0x00004000U
+#define DMA_SxNDT_15 0x00008000U
+
+/******************** Bits definition for DMA_SxFCR register ****************/
+#define DMA_SxFCR_FEIE 0x00000080U
+#define DMA_SxFCR_FS 0x00000038U
+#define DMA_SxFCR_FS_0 0x00000008U
+#define DMA_SxFCR_FS_1 0x00000010U
+#define DMA_SxFCR_FS_2 0x00000020U
+#define DMA_SxFCR_DMDIS 0x00000004U
+#define DMA_SxFCR_FTH 0x00000003U
+#define DMA_SxFCR_FTH_0 0x00000001U
+#define DMA_SxFCR_FTH_1 0x00000002U
+
+/******************** Bits definition for DMA_LISR register *****************/
+#define DMA_LISR_TCIF3 0x08000000U
+#define DMA_LISR_HTIF3 0x04000000U
+#define DMA_LISR_TEIF3 0x02000000U
+#define DMA_LISR_DMEIF3 0x01000000U
+#define DMA_LISR_FEIF3 0x00400000U
+#define DMA_LISR_TCIF2 0x00200000U
+#define DMA_LISR_HTIF2 0x00100000U
+#define DMA_LISR_TEIF2 0x00080000U
+#define DMA_LISR_DMEIF2 0x00040000U
+#define DMA_LISR_FEIF2 0x00010000U
+#define DMA_LISR_TCIF1 0x00000800U
+#define DMA_LISR_HTIF1 0x00000400U
+#define DMA_LISR_TEIF1 0x00000200U
+#define DMA_LISR_DMEIF1 0x00000100U
+#define DMA_LISR_FEIF1 0x00000040U
+#define DMA_LISR_TCIF0 0x00000020U
+#define DMA_LISR_HTIF0 0x00000010U
+#define DMA_LISR_TEIF0 0x00000008U
+#define DMA_LISR_DMEIF0 0x00000004U
+#define DMA_LISR_FEIF0 0x00000001U
+
+/******************** Bits definition for DMA_HISR register *****************/
+#define DMA_HISR_TCIF7 0x08000000U
+#define DMA_HISR_HTIF7 0x04000000U
+#define DMA_HISR_TEIF7 0x02000000U
+#define DMA_HISR_DMEIF7 0x01000000U
+#define DMA_HISR_FEIF7 0x00400000U
+#define DMA_HISR_TCIF6 0x00200000U
+#define DMA_HISR_HTIF6 0x00100000U
+#define DMA_HISR_TEIF6 0x00080000U
+#define DMA_HISR_DMEIF6 0x00040000U
+#define DMA_HISR_FEIF6 0x00010000U
+#define DMA_HISR_TCIF5 0x00000800U
+#define DMA_HISR_HTIF5 0x00000400U
+#define DMA_HISR_TEIF5 0x00000200U
+#define DMA_HISR_DMEIF5 0x00000100U
+#define DMA_HISR_FEIF5 0x00000040U
+#define DMA_HISR_TCIF4 0x00000020U
+#define DMA_HISR_HTIF4 0x00000010U
+#define DMA_HISR_TEIF4 0x00000008U
+#define DMA_HISR_DMEIF4 0x00000004U
+#define DMA_HISR_FEIF4 0x00000001U
+
+/******************** Bits definition for DMA_LIFCR register ****************/
+#define DMA_LIFCR_CTCIF3 0x08000000U
+#define DMA_LIFCR_CHTIF3 0x04000000U
+#define DMA_LIFCR_CTEIF3 0x02000000U
+#define DMA_LIFCR_CDMEIF3 0x01000000U
+#define DMA_LIFCR_CFEIF3 0x00400000U
+#define DMA_LIFCR_CTCIF2 0x00200000U
+#define DMA_LIFCR_CHTIF2 0x00100000U
+#define DMA_LIFCR_CTEIF2 0x00080000U
+#define DMA_LIFCR_CDMEIF2 0x00040000U
+#define DMA_LIFCR_CFEIF2 0x00010000U
+#define DMA_LIFCR_CTCIF1 0x00000800U
+#define DMA_LIFCR_CHTIF1 0x00000400U
+#define DMA_LIFCR_CTEIF1 0x00000200U
+#define DMA_LIFCR_CDMEIF1 0x00000100U
+#define DMA_LIFCR_CFEIF1 0x00000040U
+#define DMA_LIFCR_CTCIF0 0x00000020U
+#define DMA_LIFCR_CHTIF0 0x00000010U
+#define DMA_LIFCR_CTEIF0 0x00000008U
+#define DMA_LIFCR_CDMEIF0 0x00000004U
+#define DMA_LIFCR_CFEIF0 0x00000001U
+
+/******************** Bits definition for DMA_HIFCR register ****************/
+#define DMA_HIFCR_CTCIF7 0x08000000U
+#define DMA_HIFCR_CHTIF7 0x04000000U
+#define DMA_HIFCR_CTEIF7 0x02000000U
+#define DMA_HIFCR_CDMEIF7 0x01000000U
+#define DMA_HIFCR_CFEIF7 0x00400000U
+#define DMA_HIFCR_CTCIF6 0x00200000U
+#define DMA_HIFCR_CHTIF6 0x00100000U
+#define DMA_HIFCR_CTEIF6 0x00080000U
+#define DMA_HIFCR_CDMEIF6 0x00040000U
+#define DMA_HIFCR_CFEIF6 0x00010000U
+#define DMA_HIFCR_CTCIF5 0x00000800U
+#define DMA_HIFCR_CHTIF5 0x00000400U
+#define DMA_HIFCR_CTEIF5 0x00000200U
+#define DMA_HIFCR_CDMEIF5 0x00000100U
+#define DMA_HIFCR_CFEIF5 0x00000040U
+#define DMA_HIFCR_CTCIF4 0x00000020U
+#define DMA_HIFCR_CHTIF4 0x00000010U
+#define DMA_HIFCR_CTEIF4 0x00000008U
+#define DMA_HIFCR_CDMEIF4 0x00000004U
+#define DMA_HIFCR_CFEIF4 0x00000001U
+
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 0x00000001U /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 0x00000002U /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 0x00000004U /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 0x00000008U /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 0x00000010U /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 0x00000020U /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 0x00000040U /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 0x00000080U /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 0x00000100U /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 0x00000200U /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 0x00000400U /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 0x00000800U /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 0x00001000U /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 0x00002000U /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 0x00004000U /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 0x00008000U /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 0x00010000U /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 0x00020000U /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 0x00040000U /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 0x00080000U /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 0x00100000U /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 0x00200000U /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 0x00400000U /*!< Interrupt Mask on line 22 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 0x00000001U /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 0x00000002U /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 0x00000004U /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 0x00000008U /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 0x00000010U /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 0x00000020U /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 0x00000040U /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 0x00000080U /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 0x00000100U /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 0x00000200U /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 0x00000400U /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 0x00000800U /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 0x00001000U /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 0x00002000U /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 0x00004000U /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 0x00008000U /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 0x00010000U /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 0x00020000U /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 0x00040000U /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 0x00080000U /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 0x00100000U /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 0x00200000U /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 0x00400000U /*!< Event Mask on line 22 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 0x00000001U /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 0x00000002U /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 0x00000004U /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 0x00000008U /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 0x00000010U /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 0x00000020U /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 0x00000040U /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 0x00000080U /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 0x00000100U /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 0x00000200U /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 0x00000400U /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 0x00000800U /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 0x00001000U /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 0x00002000U /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 0x00004000U /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 0x00008000U /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 0x00010000U /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 0x00020000U /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 0x00040000U /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 0x00080000U /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 0x00100000U /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 0x00200000U /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 0x00400000U /*!< Rising trigger event configuration bit of line 22 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 0x00000001U /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 0x00000002U /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 0x00000004U /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 0x00000008U /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 0x00000010U /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 0x00000020U /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 0x00000040U /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 0x00000080U /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 0x00000100U /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 0x00000200U /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 0x00000400U /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 0x00000800U /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 0x00001000U /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 0x00002000U /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 0x00004000U /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 0x00008000U /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 0x00010000U /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 0x00020000U /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 0x00040000U /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 0x00080000U /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 0x00100000U /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 0x00200000U /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 0x00400000U /*!< Falling trigger event configuration bit of line 22 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 0x00000001U /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 0x00000002U /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 0x00000004U /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 0x00000008U /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 0x00000010U /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 0x00000020U /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 0x00000040U /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 0x00000080U /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 0x00000100U /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 0x00000200U /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 0x00000400U /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 0x00000800U /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 0x00001000U /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 0x00002000U /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 0x00004000U /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 0x00008000U /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 0x00010000U /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 0x00020000U /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 0x00040000U /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 0x00080000U /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 0x00100000U /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 0x00200000U /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 0x00400000U /*!< Software Interrupt on line 22 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 0x00000001U /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 0x00000002U /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 0x00000004U /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 0x00000008U /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 0x00000010U /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 0x00000020U /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 0x00000040U /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 0x00000080U /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 0x00000100U /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 0x00000200U /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 0x00000400U /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 0x00000800U /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 0x00001000U /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 0x00002000U /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 0x00004000U /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 0x00008000U /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 0x00010000U /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 0x00020000U /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 0x00040000U /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 0x00080000U /*!< Pending bit for line 19 */
+#define EXTI_PR_PR20 0x00100000U /*!< Pending bit for line 20 */
+#define EXTI_PR_PR21 0x00200000U /*!< Pending bit for line 21 */
+#define EXTI_PR_PR22 0x00400000U /*!< Pending bit for line 22 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bits definition for FLASH_ACR register *****************/
+#define FLASH_ACR_LATENCY 0x0000000FU
+#define FLASH_ACR_LATENCY_0WS 0x00000000U
+#define FLASH_ACR_LATENCY_1WS 0x00000001U
+#define FLASH_ACR_LATENCY_2WS 0x00000002U
+#define FLASH_ACR_LATENCY_3WS 0x00000003U
+#define FLASH_ACR_LATENCY_4WS 0x00000004U
+#define FLASH_ACR_LATENCY_5WS 0x00000005U
+#define FLASH_ACR_LATENCY_6WS 0x00000006U
+#define FLASH_ACR_LATENCY_7WS 0x00000007U
+
+#define FLASH_ACR_PRFTEN 0x00000100U
+#define FLASH_ACR_ICEN 0x00000200U
+#define FLASH_ACR_DCEN 0x00000400U
+#define FLASH_ACR_ICRST 0x00000800U
+#define FLASH_ACR_DCRST 0x00001000U
+#define FLASH_ACR_BYTE0_ADDRESS 0x40023C00U
+#define FLASH_ACR_BYTE2_ADDRESS 0x40023C03U
+
+/******************* Bits definition for FLASH_SR register ******************/
+#define FLASH_SR_EOP 0x00000001U
+#define FLASH_SR_SOP 0x00000002U
+#define FLASH_SR_WRPERR 0x00000010U
+#define FLASH_SR_PGAERR 0x00000020U
+#define FLASH_SR_PGPERR 0x00000040U
+#define FLASH_SR_PGSERR 0x00000080U
+#define FLASH_SR_BSY 0x00010000U
+
+/******************* Bits definition for FLASH_CR register ******************/
+#define FLASH_CR_PG 0x00000001U
+#define FLASH_CR_SER 0x00000002U
+#define FLASH_CR_MER 0x00000004U
+#define FLASH_CR_SNB 0x000000F8U
+#define FLASH_CR_SNB_0 0x00000008U
+#define FLASH_CR_SNB_1 0x00000010U
+#define FLASH_CR_SNB_2 0x00000020U
+#define FLASH_CR_SNB_3 0x00000040U
+#define FLASH_CR_SNB_4 0x00000080U
+#define FLASH_CR_PSIZE 0x00000300U
+#define FLASH_CR_PSIZE_0 0x00000100U
+#define FLASH_CR_PSIZE_1 0x00000200U
+#define FLASH_CR_STRT 0x00010000U
+#define FLASH_CR_EOPIE 0x01000000U
+#define FLASH_CR_LOCK 0x80000000U
+
+/******************* Bits definition for FLASH_OPTCR register ***************/
+#define FLASH_OPTCR_OPTLOCK 0x00000001U
+#define FLASH_OPTCR_OPTSTRT 0x00000002U
+#define FLASH_OPTCR_BOR_LEV_0 0x00000004U
+#define FLASH_OPTCR_BOR_LEV_1 0x00000008U
+#define FLASH_OPTCR_BOR_LEV 0x0000000CU
+
+#define FLASH_OPTCR_WDG_SW 0x00000020U
+#define FLASH_OPTCR_nRST_STOP 0x00000040U
+#define FLASH_OPTCR_nRST_STDBY 0x00000080U
+#define FLASH_OPTCR_RDP 0x0000FF00U
+#define FLASH_OPTCR_RDP_0 0x00000100U
+#define FLASH_OPTCR_RDP_1 0x00000200U
+#define FLASH_OPTCR_RDP_2 0x00000400U
+#define FLASH_OPTCR_RDP_3 0x00000800U
+#define FLASH_OPTCR_RDP_4 0x00001000U
+#define FLASH_OPTCR_RDP_5 0x00002000U
+#define FLASH_OPTCR_RDP_6 0x00004000U
+#define FLASH_OPTCR_RDP_7 0x00008000U
+#define FLASH_OPTCR_nWRP 0x0FFF0000U
+#define FLASH_OPTCR_nWRP_0 0x00010000U
+#define FLASH_OPTCR_nWRP_1 0x00020000U
+#define FLASH_OPTCR_nWRP_2 0x00040000U
+#define FLASH_OPTCR_nWRP_3 0x00080000U
+#define FLASH_OPTCR_nWRP_4 0x00100000U
+#define FLASH_OPTCR_nWRP_5 0x00200000U
+#define FLASH_OPTCR_nWRP_6 0x00400000U
+#define FLASH_OPTCR_nWRP_7 0x00800000U
+#define FLASH_OPTCR_nWRP_8 0x01000000U
+#define FLASH_OPTCR_nWRP_9 0x02000000U
+#define FLASH_OPTCR_nWRP_10 0x04000000U
+#define FLASH_OPTCR_nWRP_11 0x08000000U
+
+/****************** Bits definition for FLASH_OPTCR1 register ***************/
+#define FLASH_OPTCR1_nWRP 0x0FFF0000U
+#define FLASH_OPTCR1_nWRP_0 0x00010000U
+#define FLASH_OPTCR1_nWRP_1 0x00020000U
+#define FLASH_OPTCR1_nWRP_2 0x00040000U
+#define FLASH_OPTCR1_nWRP_3 0x00080000U
+#define FLASH_OPTCR1_nWRP_4 0x00100000U
+#define FLASH_OPTCR1_nWRP_5 0x00200000U
+#define FLASH_OPTCR1_nWRP_6 0x00400000U
+#define FLASH_OPTCR1_nWRP_7 0x00800000U
+#define FLASH_OPTCR1_nWRP_8 0x01000000U
+#define FLASH_OPTCR1_nWRP_9 0x02000000U
+#define FLASH_OPTCR1_nWRP_10 0x04000000U
+#define FLASH_OPTCR1_nWRP_11 0x08000000U
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 0x00000003U
+#define GPIO_MODER_MODER0_0 0x00000001U
+#define GPIO_MODER_MODER0_1 0x00000002U
+
+#define GPIO_MODER_MODER1 0x0000000CU
+#define GPIO_MODER_MODER1_0 0x00000004U
+#define GPIO_MODER_MODER1_1 0x00000008U
+
+#define GPIO_MODER_MODER2 0x00000030U
+#define GPIO_MODER_MODER2_0 0x00000010U
+#define GPIO_MODER_MODER2_1 0x00000020U
+
+#define GPIO_MODER_MODER3 0x000000C0U
+#define GPIO_MODER_MODER3_0 0x00000040U
+#define GPIO_MODER_MODER3_1 0x00000080U
+
+#define GPIO_MODER_MODER4 0x00000300U
+#define GPIO_MODER_MODER4_0 0x00000100U
+#define GPIO_MODER_MODER4_1 0x00000200U
+
+#define GPIO_MODER_MODER5 0x00000C00U
+#define GPIO_MODER_MODER5_0 0x00000400U
+#define GPIO_MODER_MODER5_1 0x00000800U
+
+#define GPIO_MODER_MODER6 0x00003000U
+#define GPIO_MODER_MODER6_0 0x00001000U
+#define GPIO_MODER_MODER6_1 0x00002000U
+
+#define GPIO_MODER_MODER7 0x0000C000U
+#define GPIO_MODER_MODER7_0 0x00004000U
+#define GPIO_MODER_MODER7_1 0x00008000U
+
+#define GPIO_MODER_MODER8 0x00030000U
+#define GPIO_MODER_MODER8_0 0x00010000U
+#define GPIO_MODER_MODER8_1 0x00020000U
+
+#define GPIO_MODER_MODER9 0x000C0000U
+#define GPIO_MODER_MODER9_0 0x00040000U
+#define GPIO_MODER_MODER9_1 0x00080000U
+
+#define GPIO_MODER_MODER10 0x00300000U
+#define GPIO_MODER_MODER10_0 0x00100000U
+#define GPIO_MODER_MODER10_1 0x00200000U
+
+#define GPIO_MODER_MODER11 0x00C00000U
+#define GPIO_MODER_MODER11_0 0x00400000U
+#define GPIO_MODER_MODER11_1 0x00800000U
+
+#define GPIO_MODER_MODER12 0x03000000U
+#define GPIO_MODER_MODER12_0 0x01000000U
+#define GPIO_MODER_MODER12_1 0x02000000U
+
+#define GPIO_MODER_MODER13 0x0C000000U
+#define GPIO_MODER_MODER13_0 0x04000000U
+#define GPIO_MODER_MODER13_1 0x08000000U
+
+#define GPIO_MODER_MODER14 0x30000000U
+#define GPIO_MODER_MODER14_0 0x10000000U
+#define GPIO_MODER_MODER14_1 0x20000000U
+
+#define GPIO_MODER_MODER15 0xC0000000U
+#define GPIO_MODER_MODER15_0 0x40000000U
+#define GPIO_MODER_MODER15_1 0x80000000U
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 0x00000001U
+#define GPIO_OTYPER_OT_1 0x00000002U
+#define GPIO_OTYPER_OT_2 0x00000004U
+#define GPIO_OTYPER_OT_3 0x00000008U
+#define GPIO_OTYPER_OT_4 0x00000010U
+#define GPIO_OTYPER_OT_5 0x00000020U
+#define GPIO_OTYPER_OT_6 0x00000040U
+#define GPIO_OTYPER_OT_7 0x00000080U
+#define GPIO_OTYPER_OT_8 0x00000100U
+#define GPIO_OTYPER_OT_9 0x00000200U
+#define GPIO_OTYPER_OT_10 0x00000400U
+#define GPIO_OTYPER_OT_11 0x00000800U
+#define GPIO_OTYPER_OT_12 0x00001000U
+#define GPIO_OTYPER_OT_13 0x00002000U
+#define GPIO_OTYPER_OT_14 0x00004000U
+#define GPIO_OTYPER_OT_15 0x00008000U
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 0x00000003U
+#define GPIO_OSPEEDER_OSPEEDR0_0 0x00000001U
+#define GPIO_OSPEEDER_OSPEEDR0_1 0x00000002U
+
+#define GPIO_OSPEEDER_OSPEEDR1 0x0000000CU
+#define GPIO_OSPEEDER_OSPEEDR1_0 0x00000004U
+#define GPIO_OSPEEDER_OSPEEDR1_1 0x00000008U
+
+#define GPIO_OSPEEDER_OSPEEDR2 0x00000030U
+#define GPIO_OSPEEDER_OSPEEDR2_0 0x00000010U
+#define GPIO_OSPEEDER_OSPEEDR2_1 0x00000020U
+
+#define GPIO_OSPEEDER_OSPEEDR3 0x000000C0U
+#define GPIO_OSPEEDER_OSPEEDR3_0 0x00000040U
+#define GPIO_OSPEEDER_OSPEEDR3_1 0x00000080U
+
+#define GPIO_OSPEEDER_OSPEEDR4 0x00000300U
+#define GPIO_OSPEEDER_OSPEEDR4_0 0x00000100U
+#define GPIO_OSPEEDER_OSPEEDR4_1 0x00000200U
+
+#define GPIO_OSPEEDER_OSPEEDR5 0x00000C00U
+#define GPIO_OSPEEDER_OSPEEDR5_0 0x00000400U
+#define GPIO_OSPEEDER_OSPEEDR5_1 0x00000800U
+
+#define GPIO_OSPEEDER_OSPEEDR6 0x00003000U
+#define GPIO_OSPEEDER_OSPEEDR6_0 0x00001000U
+#define GPIO_OSPEEDER_OSPEEDR6_1 0x00002000U
+
+#define GPIO_OSPEEDER_OSPEEDR7 0x0000C000U
+#define GPIO_OSPEEDER_OSPEEDR7_0 0x00004000U
+#define GPIO_OSPEEDER_OSPEEDR7_1 0x00008000U
+
+#define GPIO_OSPEEDER_OSPEEDR8 0x00030000U
+#define GPIO_OSPEEDER_OSPEEDR8_0 0x00010000U
+#define GPIO_OSPEEDER_OSPEEDR8_1 0x00020000U
+
+#define GPIO_OSPEEDER_OSPEEDR9 0x000C0000U
+#define GPIO_OSPEEDER_OSPEEDR9_0 0x00040000U
+#define GPIO_OSPEEDER_OSPEEDR9_1 0x00080000U
+
+#define GPIO_OSPEEDER_OSPEEDR10 0x00300000U
+#define GPIO_OSPEEDER_OSPEEDR10_0 0x00100000U
+#define GPIO_OSPEEDER_OSPEEDR10_1 0x00200000U
+
+#define GPIO_OSPEEDER_OSPEEDR11 0x00C00000U
+#define GPIO_OSPEEDER_OSPEEDR11_0 0x00400000U
+#define GPIO_OSPEEDER_OSPEEDR11_1 0x00800000U
+
+#define GPIO_OSPEEDER_OSPEEDR12 0x03000000U
+#define GPIO_OSPEEDER_OSPEEDR12_0 0x01000000U
+#define GPIO_OSPEEDER_OSPEEDR12_1 0x02000000U
+
+#define GPIO_OSPEEDER_OSPEEDR13 0x0C000000U
+#define GPIO_OSPEEDER_OSPEEDR13_0 0x04000000U
+#define GPIO_OSPEEDER_OSPEEDR13_1 0x08000000U
+
+#define GPIO_OSPEEDER_OSPEEDR14 0x30000000U
+#define GPIO_OSPEEDER_OSPEEDR14_0 0x10000000U
+#define GPIO_OSPEEDER_OSPEEDR14_1 0x20000000U
+
+#define GPIO_OSPEEDER_OSPEEDR15 0xC0000000U
+#define GPIO_OSPEEDER_OSPEEDR15_0 0x40000000U
+#define GPIO_OSPEEDER_OSPEEDR15_1 0x80000000U
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 0x00000003U
+#define GPIO_PUPDR_PUPDR0_0 0x00000001U
+#define GPIO_PUPDR_PUPDR0_1 0x00000002U
+
+#define GPIO_PUPDR_PUPDR1 0x0000000CU
+#define GPIO_PUPDR_PUPDR1_0 0x00000004U
+#define GPIO_PUPDR_PUPDR1_1 0x00000008U
+
+#define GPIO_PUPDR_PUPDR2 0x00000030U
+#define GPIO_PUPDR_PUPDR2_0 0x00000010U
+#define GPIO_PUPDR_PUPDR2_1 0x00000020U
+
+#define GPIO_PUPDR_PUPDR3 0x000000C0U
+#define GPIO_PUPDR_PUPDR3_0 0x00000040U
+#define GPIO_PUPDR_PUPDR3_1 0x00000080U
+
+#define GPIO_PUPDR_PUPDR4 0x00000300U
+#define GPIO_PUPDR_PUPDR4_0 0x00000100U
+#define GPIO_PUPDR_PUPDR4_1 0x00000200U
+
+#define GPIO_PUPDR_PUPDR5 0x00000C00U
+#define GPIO_PUPDR_PUPDR5_0 0x00000400U
+#define GPIO_PUPDR_PUPDR5_1 0x00000800U
+
+#define GPIO_PUPDR_PUPDR6 0x00003000U
+#define GPIO_PUPDR_PUPDR6_0 0x00001000U
+#define GPIO_PUPDR_PUPDR6_1 0x00002000U
+
+#define GPIO_PUPDR_PUPDR7 0x0000C000U
+#define GPIO_PUPDR_PUPDR7_0 0x00004000U
+#define GPIO_PUPDR_PUPDR7_1 0x00008000U
+
+#define GPIO_PUPDR_PUPDR8 0x00030000U
+#define GPIO_PUPDR_PUPDR8_0 0x00010000U
+#define GPIO_PUPDR_PUPDR8_1 0x00020000U
+
+#define GPIO_PUPDR_PUPDR9 0x000C0000U
+#define GPIO_PUPDR_PUPDR9_0 0x00040000U
+#define GPIO_PUPDR_PUPDR9_1 0x00080000U
+
+#define GPIO_PUPDR_PUPDR10 0x00300000U
+#define GPIO_PUPDR_PUPDR10_0 0x00100000U
+#define GPIO_PUPDR_PUPDR10_1 0x00200000U
+
+#define GPIO_PUPDR_PUPDR11 0x00C00000U
+#define GPIO_PUPDR_PUPDR11_0 0x00400000U
+#define GPIO_PUPDR_PUPDR11_1 0x00800000U
+
+#define GPIO_PUPDR_PUPDR12 0x03000000U
+#define GPIO_PUPDR_PUPDR12_0 0x01000000U
+#define GPIO_PUPDR_PUPDR12_1 0x02000000U
+
+#define GPIO_PUPDR_PUPDR13 0x0C000000U
+#define GPIO_PUPDR_PUPDR13_0 0x04000000U
+#define GPIO_PUPDR_PUPDR13_1 0x08000000U
+
+#define GPIO_PUPDR_PUPDR14 0x30000000U
+#define GPIO_PUPDR_PUPDR14_0 0x10000000U
+#define GPIO_PUPDR_PUPDR14_1 0x20000000U
+
+#define GPIO_PUPDR_PUPDR15 0xC0000000U
+#define GPIO_PUPDR_PUPDR15_0 0x40000000U
+#define GPIO_PUPDR_PUPDR15_1 0x80000000U
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 0x00000001U
+#define GPIO_IDR_IDR_1 0x00000002U
+#define GPIO_IDR_IDR_2 0x00000004U
+#define GPIO_IDR_IDR_3 0x00000008U
+#define GPIO_IDR_IDR_4 0x00000010U
+#define GPIO_IDR_IDR_5 0x00000020U
+#define GPIO_IDR_IDR_6 0x00000040U
+#define GPIO_IDR_IDR_7 0x00000080U
+#define GPIO_IDR_IDR_8 0x00000100U
+#define GPIO_IDR_IDR_9 0x00000200U
+#define GPIO_IDR_IDR_10 0x00000400U
+#define GPIO_IDR_IDR_11 0x00000800U
+#define GPIO_IDR_IDR_12 0x00001000U
+#define GPIO_IDR_IDR_13 0x00002000U
+#define GPIO_IDR_IDR_14 0x00004000U
+#define GPIO_IDR_IDR_15 0x00008000U
+/* Old GPIO_IDR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_IDR_0 GPIO_IDR_IDR_0
+#define GPIO_OTYPER_IDR_1 GPIO_IDR_IDR_1
+#define GPIO_OTYPER_IDR_2 GPIO_IDR_IDR_2
+#define GPIO_OTYPER_IDR_3 GPIO_IDR_IDR_3
+#define GPIO_OTYPER_IDR_4 GPIO_IDR_IDR_4
+#define GPIO_OTYPER_IDR_5 GPIO_IDR_IDR_5
+#define GPIO_OTYPER_IDR_6 GPIO_IDR_IDR_6
+#define GPIO_OTYPER_IDR_7 GPIO_IDR_IDR_7
+#define GPIO_OTYPER_IDR_8 GPIO_IDR_IDR_8
+#define GPIO_OTYPER_IDR_9 GPIO_IDR_IDR_9
+#define GPIO_OTYPER_IDR_10 GPIO_IDR_IDR_10
+#define GPIO_OTYPER_IDR_11 GPIO_IDR_IDR_11
+#define GPIO_OTYPER_IDR_12 GPIO_IDR_IDR_12
+#define GPIO_OTYPER_IDR_13 GPIO_IDR_IDR_13
+#define GPIO_OTYPER_IDR_14 GPIO_IDR_IDR_14
+#define GPIO_OTYPER_IDR_15 GPIO_IDR_IDR_15
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 0x00000001U
+#define GPIO_ODR_ODR_1 0x00000002U
+#define GPIO_ODR_ODR_2 0x00000004U
+#define GPIO_ODR_ODR_3 0x00000008U
+#define GPIO_ODR_ODR_4 0x00000010U
+#define GPIO_ODR_ODR_5 0x00000020U
+#define GPIO_ODR_ODR_6 0x00000040U
+#define GPIO_ODR_ODR_7 0x00000080U
+#define GPIO_ODR_ODR_8 0x00000100U
+#define GPIO_ODR_ODR_9 0x00000200U
+#define GPIO_ODR_ODR_10 0x00000400U
+#define GPIO_ODR_ODR_11 0x00000800U
+#define GPIO_ODR_ODR_12 0x00001000U
+#define GPIO_ODR_ODR_13 0x00002000U
+#define GPIO_ODR_ODR_14 0x00004000U
+#define GPIO_ODR_ODR_15 0x00008000U
+/* Old GPIO_ODR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_ODR_0 GPIO_ODR_ODR_0
+#define GPIO_OTYPER_ODR_1 GPIO_ODR_ODR_1
+#define GPIO_OTYPER_ODR_2 GPIO_ODR_ODR_2
+#define GPIO_OTYPER_ODR_3 GPIO_ODR_ODR_3
+#define GPIO_OTYPER_ODR_4 GPIO_ODR_ODR_4
+#define GPIO_OTYPER_ODR_5 GPIO_ODR_ODR_5
+#define GPIO_OTYPER_ODR_6 GPIO_ODR_ODR_6
+#define GPIO_OTYPER_ODR_7 GPIO_ODR_ODR_7
+#define GPIO_OTYPER_ODR_8 GPIO_ODR_ODR_8
+#define GPIO_OTYPER_ODR_9 GPIO_ODR_ODR_9
+#define GPIO_OTYPER_ODR_10 GPIO_ODR_ODR_10
+#define GPIO_OTYPER_ODR_11 GPIO_ODR_ODR_11
+#define GPIO_OTYPER_ODR_12 GPIO_ODR_ODR_12
+#define GPIO_OTYPER_ODR_13 GPIO_ODR_ODR_13
+#define GPIO_OTYPER_ODR_14 GPIO_ODR_ODR_14
+#define GPIO_OTYPER_ODR_15 GPIO_ODR_ODR_15
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 0x00000001U
+#define GPIO_BSRR_BS_1 0x00000002U
+#define GPIO_BSRR_BS_2 0x00000004U
+#define GPIO_BSRR_BS_3 0x00000008U
+#define GPIO_BSRR_BS_4 0x00000010U
+#define GPIO_BSRR_BS_5 0x00000020U
+#define GPIO_BSRR_BS_6 0x00000040U
+#define GPIO_BSRR_BS_7 0x00000080U
+#define GPIO_BSRR_BS_8 0x00000100U
+#define GPIO_BSRR_BS_9 0x00000200U
+#define GPIO_BSRR_BS_10 0x00000400U
+#define GPIO_BSRR_BS_11 0x00000800U
+#define GPIO_BSRR_BS_12 0x00001000U
+#define GPIO_BSRR_BS_13 0x00002000U
+#define GPIO_BSRR_BS_14 0x00004000U
+#define GPIO_BSRR_BS_15 0x00008000U
+#define GPIO_BSRR_BR_0 0x00010000U
+#define GPIO_BSRR_BR_1 0x00020000U
+#define GPIO_BSRR_BR_2 0x00040000U
+#define GPIO_BSRR_BR_3 0x00080000U
+#define GPIO_BSRR_BR_4 0x00100000U
+#define GPIO_BSRR_BR_5 0x00200000U
+#define GPIO_BSRR_BR_6 0x00400000U
+#define GPIO_BSRR_BR_7 0x00800000U
+#define GPIO_BSRR_BR_8 0x01000000U
+#define GPIO_BSRR_BR_9 0x02000000U
+#define GPIO_BSRR_BR_10 0x04000000U
+#define GPIO_BSRR_BR_11 0x08000000U
+#define GPIO_BSRR_BR_12 0x10000000U
+#define GPIO_BSRR_BR_13 0x20000000U
+#define GPIO_BSRR_BR_14 0x40000000U
+#define GPIO_BSRR_BR_15 0x80000000U
+
+/****************** Bit definition for GPIO_LCKR register *********************/
+#define GPIO_LCKR_LCK0 0x00000001U
+#define GPIO_LCKR_LCK1 0x00000002U
+#define GPIO_LCKR_LCK2 0x00000004U
+#define GPIO_LCKR_LCK3 0x00000008U
+#define GPIO_LCKR_LCK4 0x00000010U
+#define GPIO_LCKR_LCK5 0x00000020U
+#define GPIO_LCKR_LCK6 0x00000040U
+#define GPIO_LCKR_LCK7 0x00000080U
+#define GPIO_LCKR_LCK8 0x00000100U
+#define GPIO_LCKR_LCK9 0x00000200U
+#define GPIO_LCKR_LCK10 0x00000400U
+#define GPIO_LCKR_LCK11 0x00000800U
+#define GPIO_LCKR_LCK12 0x00001000U
+#define GPIO_LCKR_LCK13 0x00002000U
+#define GPIO_LCKR_LCK14 0x00004000U
+#define GPIO_LCKR_LCK15 0x00008000U
+#define GPIO_LCKR_LCKK 0x00010000U
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE 0x00000001U /*!<Peripheral Enable */
+#define I2C_CR1_SMBUS 0x00000002U /*!<SMBus Mode */
+#define I2C_CR1_SMBTYPE 0x00000008U /*!<SMBus Type */
+#define I2C_CR1_ENARP 0x00000010U /*!<ARP Enable */
+#define I2C_CR1_ENPEC 0x00000020U /*!<PEC Enable */
+#define I2C_CR1_ENGC 0x00000040U /*!<General Call Enable */
+#define I2C_CR1_NOSTRETCH 0x00000080U /*!<Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START 0x00000100U /*!<Start Generation */
+#define I2C_CR1_STOP 0x00000200U /*!<Stop Generation */
+#define I2C_CR1_ACK 0x00000400U /*!<Acknowledge Enable */
+#define I2C_CR1_POS 0x00000800U /*!<Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC 0x00001000U /*!<Packet Error Checking */
+#define I2C_CR1_ALERT 0x00002000U /*!<SMBus Alert */
+#define I2C_CR1_SWRST 0x00008000U /*!<Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ 0x0000003FU /*!<FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 0x00000001U /*!<Bit 0 */
+#define I2C_CR2_FREQ_1 0x00000002U /*!<Bit 1 */
+#define I2C_CR2_FREQ_2 0x00000004U /*!<Bit 2 */
+#define I2C_CR2_FREQ_3 0x00000008U /*!<Bit 3 */
+#define I2C_CR2_FREQ_4 0x00000010U /*!<Bit 4 */
+#define I2C_CR2_FREQ_5 0x00000020U /*!<Bit 5 */
+
+#define I2C_CR2_ITERREN 0x00000100U /*!<Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN 0x00000200U /*!<Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN 0x00000400U /*!<Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN 0x00000800U /*!<DMA Requests Enable */
+#define I2C_CR2_LAST 0x00001000U /*!<DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 0x000000FEU /*!<Interface Address */
+#define I2C_OAR1_ADD8_9 0x00000300U /*!<Interface Address */
+
+#define I2C_OAR1_ADD0 0x00000001U /*!<Bit 0 */
+#define I2C_OAR1_ADD1 0x00000002U /*!<Bit 1 */
+#define I2C_OAR1_ADD2 0x00000004U /*!<Bit 2 */
+#define I2C_OAR1_ADD3 0x00000008U /*!<Bit 3 */
+#define I2C_OAR1_ADD4 0x00000010U /*!<Bit 4 */
+#define I2C_OAR1_ADD5 0x00000020U /*!<Bit 5 */
+#define I2C_OAR1_ADD6 0x00000040U /*!<Bit 6 */
+#define I2C_OAR1_ADD7 0x00000080U /*!<Bit 7 */
+#define I2C_OAR1_ADD8 0x00000100U /*!<Bit 8 */
+#define I2C_OAR1_ADD9 0x00000200U /*!<Bit 9 */
+
+#define I2C_OAR1_ADDMODE 0x00008000U /*!<Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL 0x00000001U /*!<Dual addressing mode enable */
+#define I2C_OAR2_ADD2 0x000000FEU /*!<Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR 0x000000FFU /*!<8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB 0x00000001U /*!<Start Bit (Master mode) */
+#define I2C_SR1_ADDR 0x00000002U /*!<Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF 0x00000004U /*!<Byte Transfer Finished */
+#define I2C_SR1_ADD10 0x00000008U /*!<10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF 0x00000010U /*!<Stop detection (Slave mode) */
+#define I2C_SR1_RXNE 0x00000040U /*!<Data Register not Empty (receivers) */
+#define I2C_SR1_TXE 0x00000080U /*!<Data Register Empty (transmitters) */
+#define I2C_SR1_BERR 0x00000100U /*!<Bus Error */
+#define I2C_SR1_ARLO 0x00000200U /*!<Arbitration Lost (master mode) */
+#define I2C_SR1_AF 0x00000400U /*!<Acknowledge Failure */
+#define I2C_SR1_OVR 0x00000800U /*!<Overrun/Underrun */
+#define I2C_SR1_PECERR 0x00001000U /*!<PEC Error in reception */
+#define I2C_SR1_TIMEOUT 0x00004000U /*!<Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT 0x00008000U /*!<SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL 0x00000001U /*!<Master/Slave */
+#define I2C_SR2_BUSY 0x00000002U /*!<Bus Busy */
+#define I2C_SR2_TRA 0x00000004U /*!<Transmitter/Receiver */
+#define I2C_SR2_GENCALL 0x00000010U /*!<General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT 0x00000020U /*!<SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST 0x00000040U /*!<SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF 0x00000080U /*!<Dual Flag (Slave mode) */
+#define I2C_SR2_PEC 0x0000FF00U /*!<Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR 0x00000FFFU /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY 0x00004000U /*!<Fast Mode Duty Cycle */
+#define I2C_CCR_FS 0x00008000U /*!<I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE 0x0000003FU /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/****************** Bit definition for I2C_FLTR register *******************/
+#define I2C_FLTR_DNF 0x0000000FU /*!<Digital Noise Filter */
+#define I2C_FLTR_ANOFF 0x00000010U /*!<Analog Noise Filter OFF */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY 0xFFFFU /*!<Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR 0x07U /*!<PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 0x01U /*!<Bit 0 */
+#define IWDG_PR_PR_1 0x02U /*!<Bit 1 */
+#define IWDG_PR_PR_2 0x04U /*!<Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL 0x0FFFU /*!<Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU 0x01U /*!<Watchdog prescaler value update */
+#define IWDG_SR_RVU 0x02U /*!<Watchdog counter reload value update */
+
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS 0x00000001U /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS 0x00000002U /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF 0x00000004U /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF 0x00000008U /*!< Clear Standby Flag */
+#define PWR_CR_PVDE 0x00000010U /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS 0x000000E0U /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 0x00000020U /*!< Bit 0 */
+#define PWR_CR_PLS_1 0x00000040U /*!< Bit 1 */
+#define PWR_CR_PLS_2 0x00000080U /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 0x00000000U /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 0x00000020U /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 0x00000040U /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 0x00000060U /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 0x00000080U /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 0x000000A0U /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 0x000000C0U /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 0x000000E0U /*!< PVD level 7 */
+
+#define PWR_CR_DBP 0x00000100U /*!< Disable Backup Domain write protection */
+#define PWR_CR_FPDS 0x00000200U /*!< Flash power down in Stop mode */
+#define PWR_CR_LPLVDS 0x00000400U /*!< Low Power Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_MRLVDS 0x00000800U /*!< Main Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_ADCDC1 0x00002000U /*!< Refer to AN4073 on how to use this bit */
+#define PWR_CR_VOS 0x0000C000U /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define PWR_CR_VOS_0 0x00004000U /*!< Bit 0 */
+#define PWR_CR_VOS_1 0x00008000U /*!< Bit 1 */
+
+/* Legacy define */
+#define PWR_CR_PMODE PWR_CR_VOS
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF 0x00000001U /*!< Wakeup Flag */
+#define PWR_CSR_SBF 0x00000002U /*!< Standby Flag */
+#define PWR_CSR_PVDO 0x00000004U /*!< PVD Output */
+#define PWR_CSR_BRR 0x00000008U /*!< Backup regulator ready */
+#define PWR_CSR_EWUP 0x00000100U /*!< Enable WKUP pin */
+#define PWR_CSR_BRE 0x00000200U /*!< Backup regulator enable */
+#define PWR_CSR_VOSRDY 0x00004000U /*!< Regulator voltage scaling output selection ready */
+
+/* Legacy define */
+#define PWR_CSR_REGRDY PWR_CSR_VOSRDY
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION 0x00000001U
+#define RCC_CR_HSIRDY 0x00000002U
+
+#define RCC_CR_HSITRIM 0x000000F8U
+#define RCC_CR_HSITRIM_0 0x00000008U/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 0x00000010U/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 0x00000020U/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 0x00000040U/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 0x00000080U/*!<Bit 4 */
+
+#define RCC_CR_HSICAL 0x0000FF00U
+#define RCC_CR_HSICAL_0 0x00000100U/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 0x00000200U/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 0x00000400U/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 0x00000800U/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 0x00001000U/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 0x00002000U/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 0x00004000U/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 0x00008000U/*!<Bit 7 */
+
+#define RCC_CR_HSEON 0x00010000U
+#define RCC_CR_HSERDY 0x00020000U
+#define RCC_CR_HSEBYP 0x00040000U
+#define RCC_CR_CSSON 0x00080000U
+#define RCC_CR_PLLON 0x01000000U
+#define RCC_CR_PLLRDY 0x02000000U
+#define RCC_CR_PLLI2SON 0x04000000U
+#define RCC_CR_PLLI2SRDY 0x08000000U
+
+/******************** Bit definition for RCC_PLLCFGR register ***************/
+#define RCC_PLLCFGR_PLLM 0x0000003FU
+#define RCC_PLLCFGR_PLLM_0 0x00000001U
+#define RCC_PLLCFGR_PLLM_1 0x00000002U
+#define RCC_PLLCFGR_PLLM_2 0x00000004U
+#define RCC_PLLCFGR_PLLM_3 0x00000008U
+#define RCC_PLLCFGR_PLLM_4 0x00000010U
+#define RCC_PLLCFGR_PLLM_5 0x00000020U
+
+#define RCC_PLLCFGR_PLLN 0x00007FC0U
+#define RCC_PLLCFGR_PLLN_0 0x00000040U
+#define RCC_PLLCFGR_PLLN_1 0x00000080U
+#define RCC_PLLCFGR_PLLN_2 0x00000100U
+#define RCC_PLLCFGR_PLLN_3 0x00000200U
+#define RCC_PLLCFGR_PLLN_4 0x00000400U
+#define RCC_PLLCFGR_PLLN_5 0x00000800U
+#define RCC_PLLCFGR_PLLN_6 0x00001000U
+#define RCC_PLLCFGR_PLLN_7 0x00002000U
+#define RCC_PLLCFGR_PLLN_8 0x00004000U
+
+#define RCC_PLLCFGR_PLLP 0x00030000U
+#define RCC_PLLCFGR_PLLP_0 0x00010000U
+#define RCC_PLLCFGR_PLLP_1 0x00020000U
+
+#define RCC_PLLCFGR_PLLSRC 0x00400000U
+#define RCC_PLLCFGR_PLLSRC_HSE 0x00400000U
+#define RCC_PLLCFGR_PLLSRC_HSI 0x00000000U
+
+#define RCC_PLLCFGR_PLLQ 0x0F000000U
+#define RCC_PLLCFGR_PLLQ_0 0x01000000U
+#define RCC_PLLCFGR_PLLQ_1 0x02000000U
+#define RCC_PLLCFGR_PLLQ_2 0x04000000U
+#define RCC_PLLCFGR_PLLQ_3 0x08000000U
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW 0x00000003U /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 0x00000001U /*!< Bit 0 */
+#define RCC_CFGR_SW_1 0x00000002U /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI 0x00000000U /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE 0x00000001U /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL 0x00000002U /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS 0x0000000CU /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 0x00000004U /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 0x00000008U /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI 0x00000000U /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE 0x00000004U /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL 0x00000008U /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE 0x000000F0U /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 0x00000010U /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 0x00000020U /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 0x00000040U /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 0x00000080U /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 0x00000000U /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 0x00000080U /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 0x00000090U /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 0x000000A0U /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 0x000000B0U /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 0x000000C0U /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 0x000000D0U /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 0x000000E0U /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 0x000000F0U /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 0x00001C00U /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 0x00000400U /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 0x00000800U /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 0x00001000U /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 0x00000000U /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 0x00001000U /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 0x00001400U /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 0x00001800U /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 0x00001C00U /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 0x0000E000U /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 0x00002000U /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 0x00004000U /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 0x00008000U /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 0x00000000U /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 0x00008000U /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 0x0000A000U /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 0x0000C000U /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 0x0000E000U /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define RCC_CFGR_RTCPRE 0x001F0000U
+#define RCC_CFGR_RTCPRE_0 0x00010000U
+#define RCC_CFGR_RTCPRE_1 0x00020000U
+#define RCC_CFGR_RTCPRE_2 0x00040000U
+#define RCC_CFGR_RTCPRE_3 0x00080000U
+#define RCC_CFGR_RTCPRE_4 0x00100000U
+
+/*!< MCO1 configuration */
+#define RCC_CFGR_MCO1 0x00600000U
+#define RCC_CFGR_MCO1_0 0x00200000U
+#define RCC_CFGR_MCO1_1 0x00400000U
+
+#define RCC_CFGR_I2SSRC 0x00800000U
+
+#define RCC_CFGR_MCO1PRE 0x07000000U
+#define RCC_CFGR_MCO1PRE_0 0x01000000U
+#define RCC_CFGR_MCO1PRE_1 0x02000000U
+#define RCC_CFGR_MCO1PRE_2 0x04000000U
+
+#define RCC_CFGR_MCO2PRE 0x38000000U
+#define RCC_CFGR_MCO2PRE_0 0x08000000U
+#define RCC_CFGR_MCO2PRE_1 0x10000000U
+#define RCC_CFGR_MCO2PRE_2 0x20000000U
+
+#define RCC_CFGR_MCO2 0xC0000000U
+#define RCC_CFGR_MCO2_0 0x40000000U
+#define RCC_CFGR_MCO2_1 0x80000000U
+
+/******************** Bit definition for RCC_CIR register *******************/
+#define RCC_CIR_LSIRDYF 0x00000001U
+#define RCC_CIR_LSERDYF 0x00000002U
+#define RCC_CIR_HSIRDYF 0x00000004U
+#define RCC_CIR_HSERDYF 0x00000008U
+#define RCC_CIR_PLLRDYF 0x00000010U
+#define RCC_CIR_PLLI2SRDYF 0x00000020U
+
+#define RCC_CIR_CSSF 0x00000080U
+#define RCC_CIR_LSIRDYIE 0x00000100U
+#define RCC_CIR_LSERDYIE 0x00000200U
+#define RCC_CIR_HSIRDYIE 0x00000400U
+#define RCC_CIR_HSERDYIE 0x00000800U
+#define RCC_CIR_PLLRDYIE 0x00001000U
+#define RCC_CIR_PLLI2SRDYIE 0x00002000U
+
+#define RCC_CIR_LSIRDYC 0x00010000U
+#define RCC_CIR_LSERDYC 0x00020000U
+#define RCC_CIR_HSIRDYC 0x00040000U
+#define RCC_CIR_HSERDYC 0x00080000U
+#define RCC_CIR_PLLRDYC 0x00100000U
+#define RCC_CIR_PLLI2SRDYC 0x00200000U
+
+#define RCC_CIR_CSSC 0x00800000U
+
+/******************** Bit definition for RCC_AHB1RSTR register **************/
+#define RCC_AHB1RSTR_GPIOARST 0x00000001U
+#define RCC_AHB1RSTR_GPIOBRST 0x00000002U
+#define RCC_AHB1RSTR_GPIOCRST 0x00000004U
+#define RCC_AHB1RSTR_GPIODRST 0x00000008U
+#define RCC_AHB1RSTR_GPIOERST 0x00000010U
+#define RCC_AHB1RSTR_GPIOHRST 0x00000080U
+#define RCC_AHB1RSTR_CRCRST 0x00001000U
+#define RCC_AHB1RSTR_DMA1RST 0x00200000U
+#define RCC_AHB1RSTR_DMA2RST 0x00400000U
+
+/******************** Bit definition for RCC_AHB2RSTR register **************/
+#define RCC_AHB2RSTR_OTGFSRST 0x00000080U
+
+/******************** Bit definition for RCC_AHB3RSTR register **************/
+
+/******************** Bit definition for RCC_APB1RSTR register **************/
+#define RCC_APB1RSTR_TIM2RST 0x00000001U
+#define RCC_APB1RSTR_TIM3RST 0x00000002U
+#define RCC_APB1RSTR_TIM4RST 0x00000004U
+#define RCC_APB1RSTR_TIM5RST 0x00000008U
+#define RCC_APB1RSTR_WWDGRST 0x00000800U
+#define RCC_APB1RSTR_SPI2RST 0x00004000U
+#define RCC_APB1RSTR_SPI3RST 0x00008000U
+#define RCC_APB1RSTR_USART2RST 0x00020000U
+#define RCC_APB1RSTR_I2C1RST 0x00200000U
+#define RCC_APB1RSTR_I2C2RST 0x00400000U
+#define RCC_APB1RSTR_I2C3RST 0x00800000U
+#define RCC_APB1RSTR_PWRRST 0x10000000U
+
+/******************** Bit definition for RCC_APB2RSTR register **************/
+#define RCC_APB2RSTR_TIM1RST 0x00000001U
+#define RCC_APB2RSTR_USART1RST 0x00000010U
+#define RCC_APB2RSTR_USART6RST 0x00000020U
+#define RCC_APB2RSTR_ADCRST 0x00000100U
+#define RCC_APB2RSTR_SDIORST 0x00000800U
+#define RCC_APB2RSTR_SPI1RST 0x00001000U
+#define RCC_APB2RSTR_SPI4RST 0x00002000U
+#define RCC_APB2RSTR_SYSCFGRST 0x00004000U
+#define RCC_APB2RSTR_TIM9RST 0x00010000U
+#define RCC_APB2RSTR_TIM10RST 0x00020000U
+#define RCC_APB2RSTR_TIM11RST 0x00040000U
+
+/* Old SPI1RST bit definition, maintained for legacy purpose */
+#define RCC_APB2RSTR_SPI1 RCC_APB2RSTR_SPI1RST
+
+/******************** Bit definition for RCC_AHB1ENR register ***************/
+#define RCC_AHB1ENR_GPIOAEN 0x00000001U
+#define RCC_AHB1ENR_GPIOBEN 0x00000002U
+#define RCC_AHB1ENR_GPIOCEN 0x00000004U
+#define RCC_AHB1ENR_GPIODEN 0x00000008U
+#define RCC_AHB1ENR_GPIOEEN 0x00000010U
+#define RCC_AHB1ENR_GPIOHEN 0x00000080U
+#define RCC_AHB1ENR_CRCEN 0x00001000U
+#define RCC_AHB1ENR_BKPSRAMEN 0x00040000U
+#define RCC_AHB1ENR_DMA1EN 0x00200000U
+#define RCC_AHB1ENR_DMA2EN 0x00400000U
+
+/******************** Bit definition for RCC_AHB2ENR register ***************/
+#define RCC_AHB2ENR_OTGFSEN 0x00000080U
+
+/******************** Bit definition for RCC_AHB3ENR register ***************/
+
+/******************** Bit definition for RCC_APB1ENR register ***************/
+#define RCC_APB1ENR_TIM2EN 0x00000001U
+#define RCC_APB1ENR_TIM3EN 0x00000002U
+#define RCC_APB1ENR_TIM4EN 0x00000004U
+#define RCC_APB1ENR_TIM5EN 0x00000008U
+#define RCC_APB1ENR_WWDGEN 0x00000800U
+#define RCC_APB1ENR_SPI2EN 0x00004000U
+#define RCC_APB1ENR_SPI3EN 0x00008000U
+#define RCC_APB1ENR_USART2EN 0x00020000U
+#define RCC_APB1ENR_I2C1EN 0x00200000U
+#define RCC_APB1ENR_I2C2EN 0x00400000U
+#define RCC_APB1ENR_I2C3EN 0x00800000U
+#define RCC_APB1ENR_PWREN 0x10000000U
+
+/******************** Bit definition for RCC_APB2ENR register ***************/
+#define RCC_APB2ENR_TIM1EN 0x00000001U
+#define RCC_APB2ENR_USART1EN 0x00000010U
+#define RCC_APB2ENR_USART6EN 0x00000020U
+#define RCC_APB2ENR_ADC1EN 0x00000100U
+#define RCC_APB2ENR_SDIOEN 0x00000800U
+#define RCC_APB2ENR_SPI1EN 0x00001000U
+#define RCC_APB2ENR_SPI4EN 0x00002000U
+#define RCC_APB2ENR_SYSCFGEN 0x00004000U
+#define RCC_APB2ENR_TIM9EN 0x00010000U
+#define RCC_APB2ENR_TIM10EN 0x00020000U
+#define RCC_APB2ENR_TIM11EN 0x00040000U
+
+/******************** Bit definition for RCC_AHB1LPENR register *************/
+#define RCC_AHB1LPENR_GPIOALPEN 0x00000001U
+#define RCC_AHB1LPENR_GPIOBLPEN 0x00000002U
+#define RCC_AHB1LPENR_GPIOCLPEN 0x00000004U
+#define RCC_AHB1LPENR_GPIODLPEN 0x00000008U
+#define RCC_AHB1LPENR_GPIOELPEN 0x00000010U
+#define RCC_AHB1LPENR_GPIOHLPEN 0x00000080U
+#define RCC_AHB1LPENR_CRCLPEN 0x00001000U
+#define RCC_AHB1LPENR_FLITFLPEN 0x00008000U
+#define RCC_AHB1LPENR_SRAM1LPEN 0x00010000U
+#define RCC_AHB1LPENR_SRAM2LPEN 0x00020000U
+#define RCC_AHB1LPENR_BKPSRAMLPEN 0x00040000U
+#define RCC_AHB1LPENR_DMA1LPEN 0x00200000U
+#define RCC_AHB1LPENR_DMA2LPEN 0x00400000U
+
+/******************** Bit definition for RCC_AHB2LPENR register *************/
+#define RCC_AHB2LPENR_OTGFSLPEN 0x00000080U
+
+/******************** Bit definition for RCC_AHB3LPENR register *************/
+
+/******************** Bit definition for RCC_APB1LPENR register *************/
+#define RCC_APB1LPENR_TIM2LPEN 0x00000001U
+#define RCC_APB1LPENR_TIM3LPEN 0x00000002U
+#define RCC_APB1LPENR_TIM4LPEN 0x00000004U
+#define RCC_APB1LPENR_TIM5LPEN 0x00000008U
+#define RCC_APB1LPENR_WWDGLPEN 0x00000800U
+#define RCC_APB1LPENR_SPI2LPEN 0x00004000U
+#define RCC_APB1LPENR_SPI3LPEN 0x00008000U
+#define RCC_APB1LPENR_USART2LPEN 0x00020000U
+#define RCC_APB1LPENR_I2C1LPEN 0x00200000U
+#define RCC_APB1LPENR_I2C2LPEN 0x00400000U
+#define RCC_APB1LPENR_I2C3LPEN 0x00800000U
+#define RCC_APB1LPENR_PWRLPEN 0x10000000U
+#define RCC_APB1LPENR_DACLPEN 0x20000000U
+
+/******************** Bit definition for RCC_APB2LPENR register *************/
+#define RCC_APB2LPENR_TIM1LPEN 0x00000001U
+#define RCC_APB2LPENR_USART1LPEN 0x00000010U
+#define RCC_APB2LPENR_USART6LPEN 0x00000020U
+#define RCC_APB2LPENR_ADC1LPEN 0x00000100U
+#define RCC_APB2LPENR_SDIOLPEN 0x00000800U
+#define RCC_APB2LPENR_SPI1LPEN 0x00001000U
+#define RCC_APB2LPENR_SPI4LPEN 0x00002000U
+#define RCC_APB2LPENR_SYSCFGLPEN 0x00004000U
+#define RCC_APB2LPENR_TIM9LPEN 0x00010000U
+#define RCC_APB2LPENR_TIM10LPEN 0x00020000U
+#define RCC_APB2LPENR_TIM11LPEN 0x00040000U
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON 0x00000001U
+#define RCC_BDCR_LSERDY 0x00000002U
+#define RCC_BDCR_LSEBYP 0x00000004U
+
+#define RCC_BDCR_RTCSEL 0x00000300U
+#define RCC_BDCR_RTCSEL_0 0x00000100U
+#define RCC_BDCR_RTCSEL_1 0x00000200U
+
+#define RCC_BDCR_RTCEN 0x00008000U
+#define RCC_BDCR_BDRST 0x00010000U
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION 0x00000001U
+#define RCC_CSR_LSIRDY 0x00000002U
+#define RCC_CSR_RMVF 0x01000000U
+#define RCC_CSR_BORRSTF 0x02000000U
+#define RCC_CSR_PADRSTF 0x04000000U
+#define RCC_CSR_PORRSTF 0x08000000U
+#define RCC_CSR_SFTRSTF 0x10000000U
+#define RCC_CSR_WDGRSTF 0x20000000U
+#define RCC_CSR_WWDGRSTF 0x40000000U
+#define RCC_CSR_LPWRRSTF 0x80000000U
+
+/******************** Bit definition for RCC_SSCGR register *****************/
+#define RCC_SSCGR_MODPER 0x00001FFFU
+#define RCC_SSCGR_INCSTEP 0x0FFFE000U
+#define RCC_SSCGR_SPREADSEL 0x40000000U
+#define RCC_SSCGR_SSCGEN 0x80000000U
+
+/******************** Bit definition for RCC_PLLI2SCFGR register ************/
+#define RCC_PLLI2SCFGR_PLLI2SN 0x00007FC0U
+#define RCC_PLLI2SCFGR_PLLI2SN_0 0x00000040U
+#define RCC_PLLI2SCFGR_PLLI2SN_1 0x00000080U
+#define RCC_PLLI2SCFGR_PLLI2SN_2 0x00000100U
+#define RCC_PLLI2SCFGR_PLLI2SN_3 0x00000200U
+#define RCC_PLLI2SCFGR_PLLI2SN_4 0x00000400U
+#define RCC_PLLI2SCFGR_PLLI2SN_5 0x00000800U
+#define RCC_PLLI2SCFGR_PLLI2SN_6 0x00001000U
+#define RCC_PLLI2SCFGR_PLLI2SN_7 0x00002000U
+#define RCC_PLLI2SCFGR_PLLI2SN_8 0x00004000U
+
+#define RCC_PLLI2SCFGR_PLLI2SR 0x70000000U
+#define RCC_PLLI2SCFGR_PLLI2SR_0 0x10000000U
+#define RCC_PLLI2SCFGR_PLLI2SR_1 0x20000000U
+#define RCC_PLLI2SCFGR_PLLI2SR_2 0x40000000U
+
+/******************** Bit definition for RCC_DCKCFGR register ***************/
+#define RCC_DCKCFGR_TIMPRE 0x01000000U
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM 0x00400000U
+#define RTC_TR_HT 0x00300000U
+#define RTC_TR_HT_0 0x00100000U
+#define RTC_TR_HT_1 0x00200000U
+#define RTC_TR_HU 0x000F0000U
+#define RTC_TR_HU_0 0x00010000U
+#define RTC_TR_HU_1 0x00020000U
+#define RTC_TR_HU_2 0x00040000U
+#define RTC_TR_HU_3 0x00080000U
+#define RTC_TR_MNT 0x00007000U
+#define RTC_TR_MNT_0 0x00001000U
+#define RTC_TR_MNT_1 0x00002000U
+#define RTC_TR_MNT_2 0x00004000U
+#define RTC_TR_MNU 0x00000F00U
+#define RTC_TR_MNU_0 0x00000100U
+#define RTC_TR_MNU_1 0x00000200U
+#define RTC_TR_MNU_2 0x00000400U
+#define RTC_TR_MNU_3 0x00000800U
+#define RTC_TR_ST 0x00000070U
+#define RTC_TR_ST_0 0x00000010U
+#define RTC_TR_ST_1 0x00000020U
+#define RTC_TR_ST_2 0x00000040U
+#define RTC_TR_SU 0x0000000FU
+#define RTC_TR_SU_0 0x00000001U
+#define RTC_TR_SU_1 0x00000002U
+#define RTC_TR_SU_2 0x00000004U
+#define RTC_TR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT 0x00F00000U
+#define RTC_DR_YT_0 0x00100000U
+#define RTC_DR_YT_1 0x00200000U
+#define RTC_DR_YT_2 0x00400000U
+#define RTC_DR_YT_3 0x00800000U
+#define RTC_DR_YU 0x000F0000U
+#define RTC_DR_YU_0 0x00010000U
+#define RTC_DR_YU_1 0x00020000U
+#define RTC_DR_YU_2 0x00040000U
+#define RTC_DR_YU_3 0x00080000U
+#define RTC_DR_WDU 0x0000E000U
+#define RTC_DR_WDU_0 0x00002000U
+#define RTC_DR_WDU_1 0x00004000U
+#define RTC_DR_WDU_2 0x00008000U
+#define RTC_DR_MT 0x00001000U
+#define RTC_DR_MU 0x00000F00U
+#define RTC_DR_MU_0 0x00000100U
+#define RTC_DR_MU_1 0x00000200U
+#define RTC_DR_MU_2 0x00000400U
+#define RTC_DR_MU_3 0x00000800U
+#define RTC_DR_DT 0x00000030U
+#define RTC_DR_DT_0 0x00000010U
+#define RTC_DR_DT_1 0x00000020U
+#define RTC_DR_DU 0x0000000FU
+#define RTC_DR_DU_0 0x00000001U
+#define RTC_DR_DU_1 0x00000002U
+#define RTC_DR_DU_2 0x00000004U
+#define RTC_DR_DU_3 0x00000008U
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE 0x00800000U
+#define RTC_CR_OSEL 0x00600000U
+#define RTC_CR_OSEL_0 0x00200000U
+#define RTC_CR_OSEL_1 0x00400000U
+#define RTC_CR_POL 0x00100000U
+#define RTC_CR_COSEL 0x00080000U
+#define RTC_CR_BCK 0x00040000U
+#define RTC_CR_SUB1H 0x00020000U
+#define RTC_CR_ADD1H 0x00010000U
+#define RTC_CR_TSIE 0x00008000U
+#define RTC_CR_WUTIE 0x00004000U
+#define RTC_CR_ALRBIE 0x00002000U
+#define RTC_CR_ALRAIE 0x00001000U
+#define RTC_CR_TSE 0x00000800U
+#define RTC_CR_WUTE 0x00000400U
+#define RTC_CR_ALRBE 0x00000200U
+#define RTC_CR_ALRAE 0x00000100U
+#define RTC_CR_DCE 0x00000080U
+#define RTC_CR_FMT 0x00000040U
+#define RTC_CR_BYPSHAD 0x00000020U
+#define RTC_CR_REFCKON 0x00000010U
+#define RTC_CR_TSEDGE 0x00000008U
+#define RTC_CR_WUCKSEL 0x00000007U
+#define RTC_CR_WUCKSEL_0 0x00000001U
+#define RTC_CR_WUCKSEL_1 0x00000002U
+#define RTC_CR_WUCKSEL_2 0x00000004U
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF 0x00010000U
+#define RTC_ISR_TAMP1F 0x00002000U
+#define RTC_ISR_TAMP2F 0x00004000U
+#define RTC_ISR_TSOVF 0x00001000U
+#define RTC_ISR_TSF 0x00000800U
+#define RTC_ISR_WUTF 0x00000400U
+#define RTC_ISR_ALRBF 0x00000200U
+#define RTC_ISR_ALRAF 0x00000100U
+#define RTC_ISR_INIT 0x00000080U
+#define RTC_ISR_INITF 0x00000040U
+#define RTC_ISR_RSF 0x00000020U
+#define RTC_ISR_INITS 0x00000010U
+#define RTC_ISR_SHPF 0x00000008U
+#define RTC_ISR_WUTWF 0x00000004U
+#define RTC_ISR_ALRBWF 0x00000002U
+#define RTC_ISR_ALRAWF 0x00000001U
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A 0x007F0000U
+#define RTC_PRER_PREDIV_S 0x00007FFFU
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT 0x0000FFFFU
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS 0x00000080U
+#define RTC_CALIBR_DC 0x0000001FU
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 0x80000000U
+#define RTC_ALRMAR_WDSEL 0x40000000U
+#define RTC_ALRMAR_DT 0x30000000U
+#define RTC_ALRMAR_DT_0 0x10000000U
+#define RTC_ALRMAR_DT_1 0x20000000U
+#define RTC_ALRMAR_DU 0x0F000000U
+#define RTC_ALRMAR_DU_0 0x01000000U
+#define RTC_ALRMAR_DU_1 0x02000000U
+#define RTC_ALRMAR_DU_2 0x04000000U
+#define RTC_ALRMAR_DU_3 0x08000000U
+#define RTC_ALRMAR_MSK3 0x00800000U
+#define RTC_ALRMAR_PM 0x00400000U
+#define RTC_ALRMAR_HT 0x00300000U
+#define RTC_ALRMAR_HT_0 0x00100000U
+#define RTC_ALRMAR_HT_1 0x00200000U
+#define RTC_ALRMAR_HU 0x000F0000U
+#define RTC_ALRMAR_HU_0 0x00010000U
+#define RTC_ALRMAR_HU_1 0x00020000U
+#define RTC_ALRMAR_HU_2 0x00040000U
+#define RTC_ALRMAR_HU_3 0x00080000U
+#define RTC_ALRMAR_MSK2 0x00008000U
+#define RTC_ALRMAR_MNT 0x00007000U
+#define RTC_ALRMAR_MNT_0 0x00001000U
+#define RTC_ALRMAR_MNT_1 0x00002000U
+#define RTC_ALRMAR_MNT_2 0x00004000U
+#define RTC_ALRMAR_MNU 0x00000F00U
+#define RTC_ALRMAR_MNU_0 0x00000100U
+#define RTC_ALRMAR_MNU_1 0x00000200U
+#define RTC_ALRMAR_MNU_2 0x00000400U
+#define RTC_ALRMAR_MNU_3 0x00000800U
+#define RTC_ALRMAR_MSK1 0x00000080U
+#define RTC_ALRMAR_ST 0x00000070U
+#define RTC_ALRMAR_ST_0 0x00000010U
+#define RTC_ALRMAR_ST_1 0x00000020U
+#define RTC_ALRMAR_ST_2 0x00000040U
+#define RTC_ALRMAR_SU 0x0000000FU
+#define RTC_ALRMAR_SU_0 0x00000001U
+#define RTC_ALRMAR_SU_1 0x00000002U
+#define RTC_ALRMAR_SU_2 0x00000004U
+#define RTC_ALRMAR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 0x80000000U
+#define RTC_ALRMBR_WDSEL 0x40000000U
+#define RTC_ALRMBR_DT 0x30000000U
+#define RTC_ALRMBR_DT_0 0x10000000U
+#define RTC_ALRMBR_DT_1 0x20000000U
+#define RTC_ALRMBR_DU 0x0F000000U
+#define RTC_ALRMBR_DU_0 0x01000000U
+#define RTC_ALRMBR_DU_1 0x02000000U
+#define RTC_ALRMBR_DU_2 0x04000000U
+#define RTC_ALRMBR_DU_3 0x08000000U
+#define RTC_ALRMBR_MSK3 0x00800000U
+#define RTC_ALRMBR_PM 0x00400000U
+#define RTC_ALRMBR_HT 0x00300000U
+#define RTC_ALRMBR_HT_0 0x00100000U
+#define RTC_ALRMBR_HT_1 0x00200000U
+#define RTC_ALRMBR_HU 0x000F0000U
+#define RTC_ALRMBR_HU_0 0x00010000U
+#define RTC_ALRMBR_HU_1 0x00020000U
+#define RTC_ALRMBR_HU_2 0x00040000U
+#define RTC_ALRMBR_HU_3 0x00080000U
+#define RTC_ALRMBR_MSK2 0x00008000U
+#define RTC_ALRMBR_MNT 0x00007000U
+#define RTC_ALRMBR_MNT_0 0x00001000U
+#define RTC_ALRMBR_MNT_1 0x00002000U
+#define RTC_ALRMBR_MNT_2 0x00004000U
+#define RTC_ALRMBR_MNU 0x00000F00U
+#define RTC_ALRMBR_MNU_0 0x00000100U
+#define RTC_ALRMBR_MNU_1 0x00000200U
+#define RTC_ALRMBR_MNU_2 0x00000400U
+#define RTC_ALRMBR_MNU_3 0x00000800U
+#define RTC_ALRMBR_MSK1 0x00000080U
+#define RTC_ALRMBR_ST 0x00000070U
+#define RTC_ALRMBR_ST_0 0x00000010U
+#define RTC_ALRMBR_ST_1 0x00000020U
+#define RTC_ALRMBR_ST_2 0x00000040U
+#define RTC_ALRMBR_SU 0x0000000FU
+#define RTC_ALRMBR_SU_0 0x00000001U
+#define RTC_ALRMBR_SU_1 0x00000002U
+#define RTC_ALRMBR_SU_2 0x00000004U
+#define RTC_ALRMBR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY 0x000000FFU
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS 0x0000FFFFU
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS 0x00007FFFU
+#define RTC_SHIFTR_ADD1S 0x80000000U
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM 0x00400000U
+#define RTC_TSTR_HT 0x00300000U
+#define RTC_TSTR_HT_0 0x00100000U
+#define RTC_TSTR_HT_1 0x00200000U
+#define RTC_TSTR_HU 0x000F0000U
+#define RTC_TSTR_HU_0 0x00010000U
+#define RTC_TSTR_HU_1 0x00020000U
+#define RTC_TSTR_HU_2 0x00040000U
+#define RTC_TSTR_HU_3 0x00080000U
+#define RTC_TSTR_MNT 0x00007000U
+#define RTC_TSTR_MNT_0 0x00001000U
+#define RTC_TSTR_MNT_1 0x00002000U
+#define RTC_TSTR_MNT_2 0x00004000U
+#define RTC_TSTR_MNU 0x00000F00U
+#define RTC_TSTR_MNU_0 0x00000100U
+#define RTC_TSTR_MNU_1 0x00000200U
+#define RTC_TSTR_MNU_2 0x00000400U
+#define RTC_TSTR_MNU_3 0x00000800U
+#define RTC_TSTR_ST 0x00000070U
+#define RTC_TSTR_ST_0 0x00000010U
+#define RTC_TSTR_ST_1 0x00000020U
+#define RTC_TSTR_ST_2 0x00000040U
+#define RTC_TSTR_SU 0x0000000FU
+#define RTC_TSTR_SU_0 0x00000001U
+#define RTC_TSTR_SU_1 0x00000002U
+#define RTC_TSTR_SU_2 0x00000004U
+#define RTC_TSTR_SU_3 0x00000008U
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU 0x0000E000U
+#define RTC_TSDR_WDU_0 0x00002000U
+#define RTC_TSDR_WDU_1 0x00004000U
+#define RTC_TSDR_WDU_2 0x00008000U
+#define RTC_TSDR_MT 0x00001000U
+#define RTC_TSDR_MU 0x00000F00U
+#define RTC_TSDR_MU_0 0x00000100U
+#define RTC_TSDR_MU_1 0x00000200U
+#define RTC_TSDR_MU_2 0x00000400U
+#define RTC_TSDR_MU_3 0x00000800U
+#define RTC_TSDR_DT 0x00000030U
+#define RTC_TSDR_DT_0 0x00000010U
+#define RTC_TSDR_DT_1 0x00000020U
+#define RTC_TSDR_DU 0x0000000FU
+#define RTC_TSDR_DU_0 0x00000001U
+#define RTC_TSDR_DU_1 0x00000002U
+#define RTC_TSDR_DU_2 0x00000004U
+#define RTC_TSDR_DU_3 0x00000008U
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS 0x0000FFFFU
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP 0x00008000U
+#define RTC_CALR_CALW8 0x00004000U
+#define RTC_CALR_CALW16 0x00002000U
+#define RTC_CALR_CALM 0x000001FFU
+#define RTC_CALR_CALM_0 0x00000001U
+#define RTC_CALR_CALM_1 0x00000002U
+#define RTC_CALR_CALM_2 0x00000004U
+#define RTC_CALR_CALM_3 0x00000008U
+#define RTC_CALR_CALM_4 0x00000010U
+#define RTC_CALR_CALM_5 0x00000020U
+#define RTC_CALR_CALM_6 0x00000040U
+#define RTC_CALR_CALM_7 0x00000080U
+#define RTC_CALR_CALM_8 0x00000100U
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE 0x00040000U
+#define RTC_TAFCR_TSINSEL 0x00020000U
+#define RTC_TAFCR_TAMPINSEL 0x00010000U
+#define RTC_TAFCR_TAMPPUDIS 0x00008000U
+#define RTC_TAFCR_TAMPPRCH 0x00006000U
+#define RTC_TAFCR_TAMPPRCH_0 0x00002000U
+#define RTC_TAFCR_TAMPPRCH_1 0x00004000U
+#define RTC_TAFCR_TAMPFLT 0x00001800U
+#define RTC_TAFCR_TAMPFLT_0 0x00000800U
+#define RTC_TAFCR_TAMPFLT_1 0x00001000U
+#define RTC_TAFCR_TAMPFREQ 0x00000700U
+#define RTC_TAFCR_TAMPFREQ_0 0x00000100U
+#define RTC_TAFCR_TAMPFREQ_1 0x00000200U
+#define RTC_TAFCR_TAMPFREQ_2 0x00000400U
+#define RTC_TAFCR_TAMPTS 0x00000080U
+#define RTC_TAFCR_TAMP2TRG 0x00000010U
+#define RTC_TAFCR_TAMP2E 0x00000008U
+#define RTC_TAFCR_TAMPIE 0x00000004U
+#define RTC_TAFCR_TAMP1TRG 0x00000002U
+#define RTC_TAFCR_TAMP1E 0x00000001U
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS 0x0F000000U
+#define RTC_ALRMASSR_MASKSS_0 0x01000000U
+#define RTC_ALRMASSR_MASKSS_1 0x02000000U
+#define RTC_ALRMASSR_MASKSS_2 0x04000000U
+#define RTC_ALRMASSR_MASKSS_3 0x08000000U
+#define RTC_ALRMASSR_SS 0x00007FFFU
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS 0x0F000000U
+#define RTC_ALRMBSSR_MASKSS_0 0x01000000U
+#define RTC_ALRMBSSR_MASKSS_1 0x02000000U
+#define RTC_ALRMBSSR_MASKSS_2 0x04000000U
+#define RTC_ALRMBSSR_MASKSS_3 0x08000000U
+#define RTC_ALRMBSSR_SS 0x00007FFFU
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R 0xFFFFFFFFU
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R 0xFFFFFFFFU
+
+
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL 0x03U /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 0x01U /*!<Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 0x02U /*!<Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV 0x00FFU /*!<Clock divide factor */
+#define SDIO_CLKCR_CLKEN 0x0100U /*!<Clock enable bit */
+#define SDIO_CLKCR_PWRSAV 0x0200U /*!<Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS 0x0400U /*!<Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS 0x1800U /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 0x0800U /*!<Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 0x1000U /*!<Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE 0x2000U /*!<SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN 0x4000U /*!<HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG 0xFFFFFFFFU /*!<Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX 0x003FU /*!<Command Index */
+
+#define SDIO_CMD_WAITRESP 0x00C0U /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 0x0040U /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 0x0080U /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT 0x0100U /*!<CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND 0x0200U /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN 0x0400U /*!<Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND 0x0800U /*!<SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL 0x1000U /*!<Enable CMD completion */
+#define SDIO_CMD_NIEN 0x2000U /*!<Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD 0x4000U /*!<CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD 0x3FU /*!<Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 0xFFFFFFFFU /*!<Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME 0xFFFFFFFFU /*!<Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH 0x01FFFFFFU /*!<Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN 0x0001U /*!<Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR 0x0002U /*!<Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE 0x0004U /*!<Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN 0x0008U /*!<DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE 0x00F0U /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 0x0010U /*!<Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 0x0020U /*!<Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 0x0040U /*!<Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 0x0080U /*!<Bit 3 */
+
+#define SDIO_DCTRL_RWSTART 0x0100U /*!<Read wait start */
+#define SDIO_DCTRL_RWSTOP 0x0200U /*!<Read wait stop */
+#define SDIO_DCTRL_RWMOD 0x0400U /*!<Read wait mode */
+#define SDIO_DCTRL_SDIOEN 0x0800U /*!<SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT 0x01FFFFFFU /*!<Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL 0x00000001U /*!<Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL 0x00000002U /*!<Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT 0x00000004U /*!<Command response timeout */
+#define SDIO_STA_DTIMEOUT 0x00000008U /*!<Data timeout */
+#define SDIO_STA_TXUNDERR 0x00000010U /*!<Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR 0x00000020U /*!<Received FIFO overrun error */
+#define SDIO_STA_CMDREND 0x00000040U /*!<Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT 0x00000080U /*!<Command sent (no response required) */
+#define SDIO_STA_DATAEND 0x00000100U /*!<Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR 0x00000200U /*!<Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND 0x00000400U /*!<Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT 0x00000800U /*!<Command transfer in progress */
+#define SDIO_STA_TXACT 0x00001000U /*!<Data transmit in progress */
+#define SDIO_STA_RXACT 0x00002000U /*!<Data receive in progress */
+#define SDIO_STA_TXFIFOHE 0x00004000U /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF 0x00008000U /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF 0x00010000U /*!<Transmit FIFO full */
+#define SDIO_STA_RXFIFOF 0x00020000U /*!<Receive FIFO full */
+#define SDIO_STA_TXFIFOE 0x00040000U /*!<Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE 0x00080000U /*!<Receive FIFO empty */
+#define SDIO_STA_TXDAVL 0x00100000U /*!<Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL 0x00200000U /*!<Data available in receive FIFO */
+#define SDIO_STA_SDIOIT 0x00400000U /*!<SDIO interrupt received */
+#define SDIO_STA_CEATAEND 0x00800000U /*!<CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC 0x00000001U /*!<CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC 0x00000002U /*!<DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC 0x00000004U /*!<CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC 0x00000008U /*!<DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC 0x00000010U /*!<TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC 0x00000020U /*!<RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC 0x00000040U /*!<CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC 0x00000080U /*!<CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC 0x00000100U /*!<DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC 0x00000200U /*!<STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC 0x00000400U /*!<DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC 0x00400000U /*!<SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC 0x00800000U /*!<CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE 0x00000001U /*!<Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE 0x00000002U /*!<Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE 0x00000004U /*!<Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE 0x00000008U /*!<Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE 0x00000010U /*!<Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE 0x00000020U /*!<Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE 0x00000040U /*!<Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE 0x00000080U /*!<Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE 0x00000100U /*!<Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE 0x00000200U /*!<Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE 0x00000400U /*!<Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE 0x00000800U /*!<CCommand Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE 0x00001000U /*!<Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE 0x00002000U /*!<Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE 0x00004000U /*!<Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE 0x00008000U /*!<Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE 0x00010000U /*!<Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE 0x00020000U /*!<Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE 0x00040000U /*!<Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE 0x00080000U /*!<Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE 0x00100000U /*!<Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE 0x00200000U /*!<Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE 0x00400000U /*!<SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE 0x00800000U /*!<CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT 0x00FFFFFFU /*!<Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA 0xFFFFFFFFU /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA 0x00000001U /*!<Clock Phase */
+#define SPI_CR1_CPOL 0x00000002U /*!<Clock Polarity */
+#define SPI_CR1_MSTR 0x00000004U /*!<Master Selection */
+
+#define SPI_CR1_BR 0x00000038U /*!<BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 0x00000008U /*!<Bit 0 */
+#define SPI_CR1_BR_1 0x00000010U /*!<Bit 1 */
+#define SPI_CR1_BR_2 0x00000020U /*!<Bit 2 */
+
+#define SPI_CR1_SPE 0x00000040U /*!<SPI Enable */
+#define SPI_CR1_LSBFIRST 0x00000080U /*!<Frame Format */
+#define SPI_CR1_SSI 0x00000100U /*!<Internal slave select */
+#define SPI_CR1_SSM 0x00000200U /*!<Software slave management */
+#define SPI_CR1_RXONLY 0x00000400U /*!<Receive only */
+#define SPI_CR1_DFF 0x00000800U /*!<Data Frame Format */
+#define SPI_CR1_CRCNEXT 0x00001000U /*!<Transmit CRC next */
+#define SPI_CR1_CRCEN 0x00002000U /*!<Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE 0x00004000U /*!<Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE 0x00008000U /*!<Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN 0x00000001U /*!<Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN 0x00000002U /*!<Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE 0x00000004U /*!<SS Output Enable */
+#define SPI_CR2_FRF 0x00000010U /*!<Frame Format */
+#define SPI_CR2_ERRIE 0x00000020U /*!<Error Interrupt Enable */
+#define SPI_CR2_RXNEIE 0x00000040U /*!<RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE 0x00000080U /*!<Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE 0x00000001U /*!<Receive buffer Not Empty */
+#define SPI_SR_TXE 0x00000002U /*!<Transmit buffer Empty */
+#define SPI_SR_CHSIDE 0x00000004U /*!<Channel side */
+#define SPI_SR_UDR 0x00000008U /*!<Underrun flag */
+#define SPI_SR_CRCERR 0x00000010U /*!<CRC Error flag */
+#define SPI_SR_MODF 0x00000020U /*!<Mode fault */
+#define SPI_SR_OVR 0x00000040U /*!<Overrun flag */
+#define SPI_SR_BSY 0x00000080U /*!<Busy flag */
+#define SPI_SR_FRE 0x00000100U /*!<Frame format error flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR 0x0000FFFFU /*!<Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY 0x0000FFFFU /*!<CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC 0x0000FFFFU /*!<Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC 0x0000FFFFU /*!<Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN 0x00000001U /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN 0x00000006U /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 0x00000002U /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 0x00000004U /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL 0x00000008U /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD 0x00000030U /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 0x00000010U /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 0x00000020U /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC 0x00000080U /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG 0x00000300U /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 0x00000100U /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 0x00000200U /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE 0x00000400U /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD 0x00000800U /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV 0x000000FFU /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD 0x00000100U /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE 0x00000200U /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* SYSCFG */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SYSCFG_MEMRMP register ***************/
+#define SYSCFG_MEMRMP_MEM_MODE 0x00000007U /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 0x00000001U
+#define SYSCFG_MEMRMP_MEM_MODE_1 0x00000002U
+#define SYSCFG_MEMRMP_MEM_MODE_2 0x00000004U
+
+/****************** Bit definition for SYSCFG_PMC register ******************/
+#define SYSCFG_PMC_ADC1DC2 0x00010000U /*!< Refer to AN4073 on how to use this bit */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 0x000FU /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 0x00F0U /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 0x0F00U /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 0xF000U /*!<EXTI 3 configuration */
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA 0x0000U /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB 0x0001U /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC 0x0002U /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD 0x0003U /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE 0x0004U /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH 0x0007U /*!<PH[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA 0x0000U /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB 0x0010U /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC 0x0020U /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD 0x0030U /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE 0x0040U /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH 0x0070U /*!<PH[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA 0x0000U /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB 0x0100U /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC 0x0200U /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD 0x0300U /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE 0x0400U /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH 0x0700U /*!<PH[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA 0x0000U /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB 0x1000U /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC 0x2000U /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD 0x3000U /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE 0x4000U /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH 0x7000U /*!<PH[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 0x000FU /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 0x00F0U /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 0x0F00U /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 0xF000U /*!<EXTI 7 configuration */
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA 0x0000U /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB 0x0001U /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC 0x0002U /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD 0x0003U /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE 0x0004U /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH 0x0007U /*!<PH[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA 0x0000U /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB 0x0010U /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC 0x0020U /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD 0x0030U /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE 0x0040U /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH 0x0070U /*!<PH[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA 0x0000U /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB 0x0100U /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC 0x0200U /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD 0x0300U /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE 0x0400U /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH 0x0700U /*!<PH[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA 0x0000U /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB 0x1000U /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC 0x2000U /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD 0x3000U /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE 0x4000U /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH 0x7000U /*!<PH[7] pin */
+
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 0x000FU /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 0x00F0U /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 0x0F00U /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 0xF000U /*!<EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA 0x0000U /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB 0x0001U /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC 0x0002U /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD 0x0003U /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE 0x0004U /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH 0x0007U /*!<PH[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA 0x0000U /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB 0x0010U /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC 0x0020U /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD 0x0030U /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE 0x0040U /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH 0x0070U /*!<PH[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA 0x0000U /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB 0x0100U /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC 0x0200U /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD 0x0300U /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE 0x0400U /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH 0x0700U /*!<PH[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA 0x0000U /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB 0x1000U /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC 0x2000U /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD 0x3000U /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE 0x4000U /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH 0x7000U /*!<PH[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register ***************/
+#define SYSCFG_EXTICR4_EXTI12 0x000FU /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 0x00F0U /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 0x0F00U /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 0xF000U /*!<EXTI 15 configuration */
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA 0x0000U /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB 0x0001U /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC 0x0002U /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD 0x0003U /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE 0x0004U /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH 0x0007U /*!<PH[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA 0x0000U /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB 0x0010U /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC 0x0020U /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD 0x0030U /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE 0x0040U /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH 0x0070U /*!<PH[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA 0x0000U /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB 0x0100U /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC 0x0200U /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD 0x0300U /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE 0x0400U /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH 0x0700U /*!<PH[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA 0x0000U /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB 0x1000U /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC 0x2000U /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD 0x3000U /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE 0x4000U /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH 0x7000U /*!<PH[15] pin */
+
+/****************** Bit definition for SYSCFG_CMPCR register ****************/
+#define SYSCFG_CMPCR_CMP_PD 0x00000001U /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY 0x00000100U /*!<Compensation cell power-down */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN 0x0001U /*!<Counter enable */
+#define TIM_CR1_UDIS 0x0002U /*!<Update disable */
+#define TIM_CR1_URS 0x0004U /*!<Update request source */
+#define TIM_CR1_OPM 0x0008U /*!<One pulse mode */
+#define TIM_CR1_DIR 0x0010U /*!<Direction */
+
+#define TIM_CR1_CMS 0x0060U /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 0x0020U /*!<Bit 0 */
+#define TIM_CR1_CMS_1 0x0040U /*!<Bit 1 */
+
+#define TIM_CR1_ARPE 0x0080U /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD 0x0300U /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 0x0100U /*!<Bit 0 */
+#define TIM_CR1_CKD_1 0x0200U /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC 0x0001U /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS 0x0004U /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS 0x0008U /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS 0x0070U /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 0x0010U /*!<Bit 0 */
+#define TIM_CR2_MMS_1 0x0020U /*!<Bit 1 */
+#define TIM_CR2_MMS_2 0x0040U /*!<Bit 2 */
+
+#define TIM_CR2_TI1S 0x0080U /*!<TI1 Selection */
+#define TIM_CR2_OIS1 0x0100U /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N 0x0200U /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 0x0400U /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N 0x0800U /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 0x1000U /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N 0x2000U /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 0x4000U /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS 0x0007U /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 0x0001U /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 0x0002U /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 0x0004U /*!<Bit 2 */
+
+#define TIM_SMCR_TS 0x0070U /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 0x0010U /*!<Bit 0 */
+#define TIM_SMCR_TS_1 0x0020U /*!<Bit 1 */
+#define TIM_SMCR_TS_2 0x0040U /*!<Bit 2 */
+
+#define TIM_SMCR_MSM 0x0080U /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF 0x0F00U /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 0x0100U /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 0x0200U /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 0x0400U /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 0x0800U /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS 0x3000U /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 0x1000U /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 0x2000U /*!<Bit 1 */
+
+#define TIM_SMCR_ECE 0x4000U /*!<External clock enable */
+#define TIM_SMCR_ETP 0x8000U /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE 0x0001U /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE 0x0002U /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE 0x0004U /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE 0x0008U /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE 0x0010U /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE 0x0020U /*!<COM interrupt enable */
+#define TIM_DIER_TIE 0x0040U /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE 0x0080U /*!<Break interrupt enable */
+#define TIM_DIER_UDE 0x0100U /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE 0x0200U /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE 0x0400U /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE 0x0800U /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE 0x1000U /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE 0x2000U /*!<COM DMA request enable */
+#define TIM_DIER_TDE 0x4000U /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF 0x0001U /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF 0x0002U /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF 0x0004U /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF 0x0008U /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF 0x0010U /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF 0x0020U /*!<COM interrupt Flag */
+#define TIM_SR_TIF 0x0040U /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF 0x0080U /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF 0x0200U /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF 0x0400U /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF 0x0800U /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF 0x1000U /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG 0x01U /*!<Update Generation */
+#define TIM_EGR_CC1G 0x02U /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G 0x04U /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G 0x08U /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G 0x10U /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG 0x20U /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG 0x40U /*!<Trigger Generation */
+#define TIM_EGR_BG 0x80U /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S 0x0003U /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 0x0001U /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 0x0002U /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE 0x0004U /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE 0x0008U /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M 0x0070U /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 0x0040U /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE 0x0080U /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S 0x0300U /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 0x0100U /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 0x0200U /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE 0x0400U /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE 0x0800U /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M 0x7000U /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 0x4000U /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE 0x8000U /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC 0x000CU /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 0x0004U /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 0x0008U /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F 0x00F0U /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 0x0040U /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 0x0080U /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC 0x0C00U /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 0x0400U /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 0x0800U /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F 0xF000U /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 0x4000U /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 0x8000U /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S 0x0003U /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 0x0001U /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 0x0002U /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE 0x0004U /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE 0x0008U /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M 0x0070U /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 0x0040U /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE 0x0080U /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S 0x0300U /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 0x0100U /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 0x0200U /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE 0x0400U /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE 0x0800U /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M 0x7000U /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 0x4000U /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE 0x8000U /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC 0x000CU /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 0x0004U /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 0x0008U /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F 0x00F0U /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 0x0010U /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 0x0020U /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 0x0040U /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 0x0080U /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC 0x0C00U /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 0x0400U /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 0x0800U /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F 0xF000U /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 0x1000U /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 0x2000U /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 0x4000U /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 0x8000U /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E 0x0001U /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P 0x0002U /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE 0x0004U /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP 0x0008U /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E 0x0010U /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P 0x0020U /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE 0x0040U /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP 0x0080U /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E 0x0100U /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P 0x0200U /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE 0x0400U /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP 0x0800U /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E 0x1000U /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P 0x2000U /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP 0x8000U /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT 0xFFFFU /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC 0xFFFFU /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR 0xFFFFU /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP 0xFFU /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 0xFFFFU /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 0xFFFFU /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 0xFFFFU /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 0xFFFFU /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG 0x00FFU /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 0x0001U /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 0x0002U /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 0x0004U /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 0x0008U /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 0x0010U /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 0x0020U /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 0x0040U /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 0x0080U /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK 0x0300U /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 0x0100U /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 0x0200U /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI 0x0400U /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR 0x0800U /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE 0x1000U /*!<Break enable */
+#define TIM_BDTR_BKP 0x2000U /*!<Break Polarity */
+#define TIM_BDTR_AOE 0x4000U /*!<Automatic Output enable */
+#define TIM_BDTR_MOE 0x8000U /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA 0x001FU /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 0x0001U /*!<Bit 0 */
+#define TIM_DCR_DBA_1 0x0002U /*!<Bit 1 */
+#define TIM_DCR_DBA_2 0x0004U /*!<Bit 2 */
+#define TIM_DCR_DBA_3 0x0008U /*!<Bit 3 */
+#define TIM_DCR_DBA_4 0x0010U /*!<Bit 4 */
+
+#define TIM_DCR_DBL 0x1F00U /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 0x0100U /*!<Bit 0 */
+#define TIM_DCR_DBL_1 0x0200U /*!<Bit 1 */
+#define TIM_DCR_DBL_2 0x0400U /*!<Bit 2 */
+#define TIM_DCR_DBL_3 0x0800U /*!<Bit 3 */
+#define TIM_DCR_DBL_4 0x1000U /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB 0xFFFFU /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI4_RMP 0x00C0U /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap) */
+#define TIM_OR_TI4_RMP_0 0x0040U /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1 0x0080U /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP 0x0C00U /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0 0x0400U /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1 0x0800U /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE 0x0001U /*!<Parity Error */
+#define USART_SR_FE 0x0002U /*!<Framing Error */
+#define USART_SR_NE 0x0004U /*!<Noise Error Flag */
+#define USART_SR_ORE 0x0008U /*!<OverRun Error */
+#define USART_SR_IDLE 0x0010U /*!<IDLE line detected */
+#define USART_SR_RXNE 0x0020U /*!<Read Data Register Not Empty */
+#define USART_SR_TC 0x0040U /*!<Transmission Complete */
+#define USART_SR_TXE 0x0080U /*!<Transmit Data Register Empty */
+#define USART_SR_LBD 0x0100U /*!<LIN Break Detection Flag */
+#define USART_SR_CTS 0x0200U /*!<CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR 0x01FFU /*!<Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction 0x000FU /*!<Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa 0xFFF0U /*!<Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK 0x0001U /*!<Send Break */
+#define USART_CR1_RWU 0x0002U /*!<Receiver wakeup */
+#define USART_CR1_RE 0x0004U /*!<Receiver Enable */
+#define USART_CR1_TE 0x0008U /*!<Transmitter Enable */
+#define USART_CR1_IDLEIE 0x0010U /*!<IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE 0x0020U /*!<RXNE Interrupt Enable */
+#define USART_CR1_TCIE 0x0040U /*!<Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE 0x0080U /*!<PE Interrupt Enable */
+#define USART_CR1_PEIE 0x0100U /*!<PE Interrupt Enable */
+#define USART_CR1_PS 0x0200U /*!<Parity Selection */
+#define USART_CR1_PCE 0x0400U /*!<Parity Control Enable */
+#define USART_CR1_WAKE 0x0800U /*!<Wakeup method */
+#define USART_CR1_M 0x1000U /*!<Word length */
+#define USART_CR1_UE 0x2000U /*!<USART Enable */
+#define USART_CR1_OVER8 0x8000U /*!<USART Oversampling by 8 enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD 0x000FU /*!<Address of the USART node */
+#define USART_CR2_LBDL 0x0020U /*!<LIN Break Detection Length */
+#define USART_CR2_LBDIE 0x0040U /*!<LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL 0x0100U /*!<Last Bit Clock pulse */
+#define USART_CR2_CPHA 0x0200U /*!<Clock Phase */
+#define USART_CR2_CPOL 0x0400U /*!<Clock Polarity */
+#define USART_CR2_CLKEN 0x0800U /*!<Clock Enable */
+
+#define USART_CR2_STOP 0x3000U /*!<STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 0x1000U /*!<Bit 0 */
+#define USART_CR2_STOP_1 0x2000U /*!<Bit 1 */
+
+#define USART_CR2_LINEN 0x4000U /*!<LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE 0x0001U /*!<Error Interrupt Enable */
+#define USART_CR3_IREN 0x0002U /*!<IrDA mode Enable */
+#define USART_CR3_IRLP 0x0004U /*!<IrDA Low-Power */
+#define USART_CR3_HDSEL 0x0008U /*!<Half-Duplex Selection */
+#define USART_CR3_NACK 0x0010U /*!<Smartcard NACK enable */
+#define USART_CR3_SCEN 0x0020U /*!<Smartcard mode enable */
+#define USART_CR3_DMAR 0x0040U /*!<DMA Enable Receiver */
+#define USART_CR3_DMAT 0x0080U /*!<DMA Enable Transmitter */
+#define USART_CR3_RTSE 0x0100U /*!<RTS Enable */
+#define USART_CR3_CTSE 0x0200U /*!<CTS Enable */
+#define USART_CR3_CTSIE 0x0400U /*!<CTS Interrupt Enable */
+#define USART_CR3_ONEBIT 0x0800U /*!<USART One bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC 0x00FFU /*!<PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 0x0001U /*!<Bit 0 */
+#define USART_GTPR_PSC_1 0x0002U /*!<Bit 1 */
+#define USART_GTPR_PSC_2 0x0004U /*!<Bit 2 */
+#define USART_GTPR_PSC_3 0x0008U /*!<Bit 3 */
+#define USART_GTPR_PSC_4 0x0010U /*!<Bit 4 */
+#define USART_GTPR_PSC_5 0x0020U /*!<Bit 5 */
+#define USART_GTPR_PSC_6 0x0040U /*!<Bit 6 */
+#define USART_GTPR_PSC_7 0x0080U /*!<Bit 7 */
+
+#define USART_GTPR_GT 0xFF00U /*!<Guard time value */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T 0x7FU /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T_0 0x01U /*!<Bit 0 */
+#define WWDG_CR_T_1 0x02U /*!<Bit 1 */
+#define WWDG_CR_T_2 0x04U /*!<Bit 2 */
+#define WWDG_CR_T_3 0x08U /*!<Bit 3 */
+#define WWDG_CR_T_4 0x10U /*!<Bit 4 */
+#define WWDG_CR_T_5 0x20U /*!<Bit 5 */
+#define WWDG_CR_T_6 0x40U /*!<Bit 6 */
+/* Legacy defines */
+#define WWDG_CR_T0 WWDG_CR_T_0
+#define WWDG_CR_T1 WWDG_CR_T_1
+#define WWDG_CR_T2 WWDG_CR_T_2
+#define WWDG_CR_T3 WWDG_CR_T_3
+#define WWDG_CR_T4 WWDG_CR_T_4
+#define WWDG_CR_T5 WWDG_CR_T_5
+#define WWDG_CR_T6 WWDG_CR_T_6
+
+#define WWDG_CR_WDGA 0x80U /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W 0x007FU /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W_0 0x0001U /*!<Bit 0 */
+#define WWDG_CFR_W_1 0x0002U /*!<Bit 1 */
+#define WWDG_CFR_W_2 0x0004U /*!<Bit 2 */
+#define WWDG_CFR_W_3 0x0008U /*!<Bit 3 */
+#define WWDG_CFR_W_4 0x0010U /*!<Bit 4 */
+#define WWDG_CFR_W_5 0x0020U /*!<Bit 5 */
+#define WWDG_CFR_W_6 0x0040U /*!<Bit 6 */
+/* Legacy defines */
+#define WWDG_CFR_W0 WWDG_CFR_W_0
+#define WWDG_CFR_W1 WWDG_CFR_W_1
+#define WWDG_CFR_W2 WWDG_CFR_W_2
+#define WWDG_CFR_W3 WWDG_CFR_W_3
+#define WWDG_CFR_W4 WWDG_CFR_W_4
+#define WWDG_CFR_W5 WWDG_CFR_W_5
+#define WWDG_CFR_W6 WWDG_CFR_W_6
+
+#define WWDG_CFR_WDGTB 0x0180U /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB_0 0x0080U /*!<Bit 0 */
+#define WWDG_CFR_WDGTB_1 0x0100U /*!<Bit 1 */
+/* Legacy defines */
+#define WWDG_CFR_WDGTB0 WWDG_CFR_WDGTB_0
+#define WWDG_CFR_WDGTB1 WWDG_CFR_WDGTB_1
+
+#define WWDG_CFR_EWI 0x0200U /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF 0x01U /*!<Early Wakeup Interrupt Flag */
+
+
+/******************************************************************************/
+/* */
+/* DBG */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID 0x00000FFFU
+#define DBGMCU_IDCODE_REV_ID 0xFFFF0000U
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP 0x00000001U
+#define DBGMCU_CR_DBG_STOP 0x00000002U
+#define DBGMCU_CR_DBG_STANDBY 0x00000004U
+#define DBGMCU_CR_TRACE_IOEN 0x00000020U
+
+#define DBGMCU_CR_TRACE_MODE 0x000000C0U
+#define DBGMCU_CR_TRACE_MODE_0 0x00000040U/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 0x00000080U/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP 0x00000001U
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP 0x00000002U
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP 0x00000004U
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP 0x00000008U
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP 0x00000010U
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP 0x00000020U
+#define DBGMCU_APB1_FZ_DBG_TIM12_STOP 0x00000040U
+#define DBGMCU_APB1_FZ_DBG_TIM13_STOP 0x00000080U
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP 0x00000100U
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP 0x00000400U
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP 0x00000800U
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP 0x00001000U
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT 0x00200000U
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT 0x00400000U
+#define DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT 0x00800000U
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP 0x02000000U
+#define DBGMCU_APB1_FZ_DBG_CAN2_STOP 0x04000000U
+/* Old IWDGSTOP bit definition, maintained for legacy purpose */
+#define DBGMCU_APB1_FZ_DBG_IWDEG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP 0x00000001U
+#define DBGMCU_APB2_FZ_DBG_TIM8_STOP 0x00000002U
+#define DBGMCU_APB2_FZ_DBG_TIM9_STOP 0x00010000U
+#define DBGMCU_APB2_FZ_DBG_TIM10_STOP 0x00020000U
+#define DBGMCU_APB2_FZ_DBG_TIM11_STOP 0x00040000U
+
+/******************************************************************************/
+/* */
+/* USB_OTG */
+/* */
+/******************************************************************************/
+/******************** Bit definition forUSB_OTG_GOTGCTL register ********************/
+#define USB_OTG_GOTGCTL_SRQSCS 0x00000001U /*!< Session request success */
+#define USB_OTG_GOTGCTL_SRQ 0x00000002U /*!< Session request */
+#define USB_OTG_GOTGCTL_HNGSCS 0x00000100U /*!< Host negotiation success */
+#define USB_OTG_GOTGCTL_HNPRQ 0x00000200U /*!< HNP request */
+#define USB_OTG_GOTGCTL_HSHNPEN 0x00000400U /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_DHNPEN 0x00000800U /*!< Device HNP enabled */
+#define USB_OTG_GOTGCTL_CIDSTS 0x00010000U /*!< Connector ID status */
+#define USB_OTG_GOTGCTL_DBCT 0x00020000U /*!< Long/short debounce time */
+#define USB_OTG_GOTGCTL_ASVLD 0x00040000U /*!< A-session valid */
+#define USB_OTG_GOTGCTL_BSVLD 0x00080000U /*!< B-session valid */
+
+/******************** Bit definition forUSB_OTG_HCFG register ********************/
+
+#define USB_OTG_HCFG_FSLSPCS 0x00000003U /*!< FS/LS PHY clock select */
+#define USB_OTG_HCFG_FSLSPCS_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_HCFG_FSLSPCS_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_HCFG_FSLSS 0x00000004U /*!< FS- and LS-only support */
+
+/******************** Bit definition forUSB_OTG_DCFG register ********************/
+
+#define USB_OTG_DCFG_DSPD 0x00000003U /*!< Device speed */
+#define USB_OTG_DCFG_DSPD_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_DCFG_DSPD_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_DCFG_NZLSOHSK 0x00000004U /*!< Nonzero-length status OUT handshake */
+
+#define USB_OTG_DCFG_DAD 0x000007F0U /*!< Device address */
+#define USB_OTG_DCFG_DAD_0 0x00000010U /*!<Bit 0 */
+#define USB_OTG_DCFG_DAD_1 0x00000020U /*!<Bit 1 */
+#define USB_OTG_DCFG_DAD_2 0x00000040U /*!<Bit 2 */
+#define USB_OTG_DCFG_DAD_3 0x00000080U /*!<Bit 3 */
+#define USB_OTG_DCFG_DAD_4 0x00000100U /*!<Bit 4 */
+#define USB_OTG_DCFG_DAD_5 0x00000200U /*!<Bit 5 */
+#define USB_OTG_DCFG_DAD_6 0x00000400U /*!<Bit 6 */
+
+#define USB_OTG_DCFG_PFIVL 0x00001800U /*!< Periodic (micro)frame interval */
+#define USB_OTG_DCFG_PFIVL_0 0x00000800U /*!<Bit 0 */
+#define USB_OTG_DCFG_PFIVL_1 0x00001000U /*!<Bit 1 */
+
+#define USB_OTG_DCFG_PERSCHIVL 0x03000000U /*!< Periodic scheduling interval */
+#define USB_OTG_DCFG_PERSCHIVL_0 0x01000000U /*!<Bit 0 */
+#define USB_OTG_DCFG_PERSCHIVL_1 0x02000000U /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_PCGCR register ********************/
+#define USB_OTG_PCGCR_STPPCLK 0x00000001U /*!< Stop PHY clock */
+#define USB_OTG_PCGCR_GATEHCLK 0x00000002U /*!< Gate HCLK */
+#define USB_OTG_PCGCR_PHYSUSP 0x00000010U /*!< PHY suspended */
+
+/******************** Bit definition forUSB_OTG_GOTGINT register ********************/
+#define USB_OTG_GOTGINT_SEDET 0x00000004U /*!< Session end detected */
+#define USB_OTG_GOTGINT_SRSSCHG 0x00000100U /*!< Session request success status change */
+#define USB_OTG_GOTGINT_HNSSCHG 0x00000200U /*!< Host negotiation success status change */
+#define USB_OTG_GOTGINT_HNGDET 0x00020000U /*!< Host negotiation detected */
+#define USB_OTG_GOTGINT_ADTOCHG 0x00040000U /*!< A-device timeout change */
+#define USB_OTG_GOTGINT_DBCDNE 0x00080000U /*!< Debounce done */
+
+/******************** Bit definition forUSB_OTG_DCTL register ********************/
+#define USB_OTG_DCTL_RWUSIG 0x00000001U /*!< Remote wakeup signaling */
+#define USB_OTG_DCTL_SDIS 0x00000002U /*!< Soft disconnect */
+#define USB_OTG_DCTL_GINSTS 0x00000004U /*!< Global IN NAK status */
+#define USB_OTG_DCTL_GONSTS 0x00000008U /*!< Global OUT NAK status */
+
+#define USB_OTG_DCTL_TCTL 0x00000070U /*!< Test control */
+#define USB_OTG_DCTL_TCTL_0 0x00000010U /*!<Bit 0 */
+#define USB_OTG_DCTL_TCTL_1 0x00000020U /*!<Bit 1 */
+#define USB_OTG_DCTL_TCTL_2 0x00000040U /*!<Bit 2 */
+#define USB_OTG_DCTL_SGINAK 0x00000080U /*!< Set global IN NAK */
+#define USB_OTG_DCTL_CGINAK 0x00000100U /*!< Clear global IN NAK */
+#define USB_OTG_DCTL_SGONAK 0x00000200U /*!< Set global OUT NAK */
+#define USB_OTG_DCTL_CGONAK 0x00000400U /*!< Clear global OUT NAK */
+#define USB_OTG_DCTL_POPRGDNE 0x00000800U /*!< Power-on programming done */
+
+/******************** Bit definition forUSB_OTG_HFIR register ********************/
+#define USB_OTG_HFIR_FRIVL 0x0000FFFFU /*!< Frame interval */
+
+/******************** Bit definition forUSB_OTG_HFNUM register ********************/
+#define USB_OTG_HFNUM_FRNUM 0x0000FFFFU /*!< Frame number */
+#define USB_OTG_HFNUM_FTREM 0xFFFF0000U /*!< Frame time remaining */
+
+/******************** Bit definition forUSB_OTG_DSTS register ********************/
+#define USB_OTG_DSTS_SUSPSTS 0x00000001U /*!< Suspend status */
+
+#define USB_OTG_DSTS_ENUMSPD 0x00000006U /*!< Enumerated speed */
+#define USB_OTG_DSTS_ENUMSPD_0 0x00000002U /*!<Bit 0 */
+#define USB_OTG_DSTS_ENUMSPD_1 0x00000004U /*!<Bit 1 */
+#define USB_OTG_DSTS_EERR 0x00000008U /*!< Erratic error */
+#define USB_OTG_DSTS_FNSOF 0x003FFF00U /*!< Frame number of the received SOF */
+
+/******************** Bit definition forUSB_OTG_GAHBCFG register ********************/
+#define USB_OTG_GAHBCFG_GINT 0x00000001U /*!< Global interrupt mask */
+
+#define USB_OTG_GAHBCFG_HBSTLEN 0x0000001EU /*!< Burst length/type */
+#define USB_OTG_GAHBCFG_HBSTLEN_0 0x00000002U /*!<Bit 0 */
+#define USB_OTG_GAHBCFG_HBSTLEN_1 0x00000004U /*!<Bit 1 */
+#define USB_OTG_GAHBCFG_HBSTLEN_2 0x00000008U /*!<Bit 2 */
+#define USB_OTG_GAHBCFG_HBSTLEN_3 0x00000010U /*!<Bit 3 */
+#define USB_OTG_GAHBCFG_DMAEN 0x00000020U /*!< DMA enable */
+#define USB_OTG_GAHBCFG_TXFELVL 0x00000080U /*!< TxFIFO empty level */
+#define USB_OTG_GAHBCFG_PTXFELVL 0x00000100U /*!< Periodic TxFIFO empty level */
+
+/******************** Bit definition forUSB_OTG_GUSBCFG register ********************/
+
+#define USB_OTG_GUSBCFG_TOCAL 0x00000007U /*!< FS timeout calibration */
+#define USB_OTG_GUSBCFG_TOCAL_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TOCAL_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TOCAL_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_PHYSEL 0x00000040U /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
+#define USB_OTG_GUSBCFG_SRPCAP 0x00000100U /*!< SRP-capable */
+#define USB_OTG_GUSBCFG_HNPCAP 0x00000200U /*!< HNP-capable */
+
+#define USB_OTG_GUSBCFG_TRDT 0x00003C00U /*!< USB turnaround time */
+#define USB_OTG_GUSBCFG_TRDT_0 0x00000400U /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TRDT_1 0x00000800U /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TRDT_2 0x00001000U /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_TRDT_3 0x00002000U /*!<Bit 3 */
+#define USB_OTG_GUSBCFG_PHYLPCS 0x00008000U /*!< PHY Low-power clock select */
+#define USB_OTG_GUSBCFG_ULPIFSLS 0x00020000U /*!< ULPI FS/LS select */
+#define USB_OTG_GUSBCFG_ULPIAR 0x00040000U /*!< ULPI Auto-resume */
+#define USB_OTG_GUSBCFG_ULPICSM 0x00080000U /*!< ULPI Clock SuspendM */
+#define USB_OTG_GUSBCFG_ULPIEVBUSD 0x00100000U /*!< ULPI External VBUS Drive */
+#define USB_OTG_GUSBCFG_ULPIEVBUSI 0x00200000U /*!< ULPI external VBUS indicator */
+#define USB_OTG_GUSBCFG_TSDPS 0x00400000U /*!< TermSel DLine pulsing selection */
+#define USB_OTG_GUSBCFG_PCCI 0x00800000U /*!< Indicator complement */
+#define USB_OTG_GUSBCFG_PTCI 0x01000000U /*!< Indicator pass through */
+#define USB_OTG_GUSBCFG_ULPIIPD 0x02000000U /*!< ULPI interface protect disable */
+#define USB_OTG_GUSBCFG_FHMOD 0x20000000U /*!< Forced host mode */
+#define USB_OTG_GUSBCFG_FDMOD 0x40000000U /*!< Forced peripheral mode */
+#define USB_OTG_GUSBCFG_CTXPKT 0x80000000U /*!< Corrupt Tx packet */
+
+/******************** Bit definition forUSB_OTG_GRSTCTL register ********************/
+#define USB_OTG_GRSTCTL_CSRST 0x00000001U /*!< Core soft reset */
+#define USB_OTG_GRSTCTL_HSRST 0x00000002U /*!< HCLK soft reset */
+#define USB_OTG_GRSTCTL_FCRST 0x00000004U /*!< Host frame counter reset */
+#define USB_OTG_GRSTCTL_RXFFLSH 0x00000010U /*!< RxFIFO flush */
+#define USB_OTG_GRSTCTL_TXFFLSH 0x00000020U /*!< TxFIFO flush */
+
+#define USB_OTG_GRSTCTL_TXFNUM 0x000007C0U /*!< TxFIFO number */
+#define USB_OTG_GRSTCTL_TXFNUM_0 0x00000040U /*!<Bit 0 */
+#define USB_OTG_GRSTCTL_TXFNUM_1 0x00000080U /*!<Bit 1 */
+#define USB_OTG_GRSTCTL_TXFNUM_2 0x00000100U /*!<Bit 2 */
+#define USB_OTG_GRSTCTL_TXFNUM_3 0x00000200U /*!<Bit 3 */
+#define USB_OTG_GRSTCTL_TXFNUM_4 0x00000400U /*!<Bit 4 */
+#define USB_OTG_GRSTCTL_DMAREQ 0x40000000U /*!< DMA request signal */
+#define USB_OTG_GRSTCTL_AHBIDL 0x80000000U /*!< AHB master idle */
+
+/******************** Bit definition forUSB_OTG_DIEPMSK register ********************/
+#define USB_OTG_DIEPMSK_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPMSK_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPMSK_TOM 0x00000008U /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPMSK_ITTXFEMSK 0x00000010U /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPMSK_INEPNMM 0x00000020U /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPMSK_INEPNEM 0x00000040U /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPMSK_TXFURM 0x00000100U /*!< FIFO underrun mask */
+#define USB_OTG_DIEPMSK_BIM 0x00000200U /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXSTS register ********************/
+#define USB_OTG_HPTXSTS_PTXFSAVL 0x0000FFFFU /*!< Periodic transmit data FIFO space available */
+
+#define USB_OTG_HPTXSTS_PTXQSAV 0x00FF0000U /*!< Periodic transmit request queue space available */
+#define USB_OTG_HPTXSTS_PTXQSAV_0 0x00010000U /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQSAV_1 0x00020000U /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQSAV_2 0x00040000U /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQSAV_3 0x00080000U /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQSAV_4 0x00100000U /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQSAV_5 0x00200000U /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQSAV_6 0x00400000U /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQSAV_7 0x00800000U /*!<Bit 7 */
+
+#define USB_OTG_HPTXSTS_PTXQTOP 0xFF000000U /*!< Top of the periodic transmit request queue */
+#define USB_OTG_HPTXSTS_PTXQTOP_0 0x01000000U /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQTOP_1 0x02000000U /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQTOP_2 0x04000000U /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQTOP_3 0x08000000U /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQTOP_4 0x10000000U /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQTOP_5 0x20000000U /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQTOP_6 0x40000000U /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQTOP_7 0x80000000U /*!<Bit 7 */
+
+/******************** Bit definition forUSB_OTG_HAINT register ********************/
+#define USB_OTG_HAINT_HAINT 0x0000FFFFU /*!< Channel interrupts */
+
+/******************** Bit definition forUSB_OTG_DOEPMSK register ********************/
+#define USB_OTG_DOEPMSK_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPMSK_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPMSK_STUPM 0x00000008U /*!< SETUP phase done mask */
+#define USB_OTG_DOEPMSK_OTEPDM 0x00000010U /*!< OUT token received when endpoint disabled mask */
+#define USB_OTG_DOEPMSK_B2BSTUP 0x00000040U /*!< Back-to-back SETUP packets received mask */
+#define USB_OTG_DOEPMSK_OPEM 0x00000100U /*!< OUT packet error mask */
+#define USB_OTG_DOEPMSK_BOIM 0x00000200U /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_GINTSTS register ********************/
+#define USB_OTG_GINTSTS_CMOD 0x00000001U /*!< Current mode of operation */
+#define USB_OTG_GINTSTS_MMIS 0x00000002U /*!< Mode mismatch interrupt */
+#define USB_OTG_GINTSTS_OTGINT 0x00000004U /*!< OTG interrupt */
+#define USB_OTG_GINTSTS_SOF 0x00000008U /*!< Start of frame */
+#define USB_OTG_GINTSTS_RXFLVL 0x00000010U /*!< RxFIFO nonempty */
+#define USB_OTG_GINTSTS_NPTXFE 0x00000020U /*!< Nonperiodic TxFIFO empty */
+#define USB_OTG_GINTSTS_GINAKEFF 0x00000040U /*!< Global IN nonperiodic NAK effective */
+#define USB_OTG_GINTSTS_BOUTNAKEFF 0x00000080U /*!< Global OUT NAK effective */
+#define USB_OTG_GINTSTS_ESUSP 0x00000400U /*!< Early suspend */
+#define USB_OTG_GINTSTS_USBSUSP 0x00000800U /*!< USB suspend */
+#define USB_OTG_GINTSTS_USBRST 0x00001000U /*!< USB reset */
+#define USB_OTG_GINTSTS_ENUMDNE 0x00002000U /*!< Enumeration done */
+#define USB_OTG_GINTSTS_ISOODRP 0x00004000U /*!< Isochronous OUT packet dropped interrupt */
+#define USB_OTG_GINTSTS_EOPF 0x00008000U /*!< End of periodic frame interrupt */
+#define USB_OTG_GINTSTS_IEPINT 0x00040000U /*!< IN endpoint interrupt */
+#define USB_OTG_GINTSTS_OEPINT 0x00080000U /*!< OUT endpoint interrupt */
+#define USB_OTG_GINTSTS_IISOIXFR 0x00100000U /*!< Incomplete isochronous IN transfer */
+#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT 0x00200000U /*!< Incomplete periodic transfer */
+#define USB_OTG_GINTSTS_DATAFSUSP 0x00400000U /*!< Data fetch suspended */
+#define USB_OTG_GINTSTS_HPRTINT 0x01000000U /*!< Host port interrupt */
+#define USB_OTG_GINTSTS_HCINT 0x02000000U /*!< Host channels interrupt */
+#define USB_OTG_GINTSTS_PTXFE 0x04000000U /*!< Periodic TxFIFO empty */
+#define USB_OTG_GINTSTS_CIDSCHG 0x10000000U /*!< Connector ID status change */
+#define USB_OTG_GINTSTS_DISCINT 0x20000000U /*!< Disconnect detected interrupt */
+#define USB_OTG_GINTSTS_SRQINT 0x40000000U /*!< Session request/new session detected interrupt */
+#define USB_OTG_GINTSTS_WKUINT 0x80000000U /*!< Resume/remote wakeup detected interrupt */
+
+/******************** Bit definition forUSB_OTG_GINTMSK register ********************/
+#define USB_OTG_GINTMSK_MMISM 0x00000002U /*!< Mode mismatch interrupt mask */
+#define USB_OTG_GINTMSK_OTGINT 0x00000004U /*!< OTG interrupt mask */
+#define USB_OTG_GINTMSK_SOFM 0x00000008U /*!< Start of frame mask */
+#define USB_OTG_GINTMSK_RXFLVLM 0x00000010U /*!< Receive FIFO nonempty mask */
+#define USB_OTG_GINTMSK_NPTXFEM 0x00000020U /*!< Nonperiodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_GINAKEFFM 0x00000040U /*!< Global nonperiodic IN NAK effective mask */
+#define USB_OTG_GINTMSK_GONAKEFFM 0x00000080U /*!< Global OUT NAK effective mask */
+#define USB_OTG_GINTMSK_ESUSPM 0x00000400U /*!< Early suspend mask */
+#define USB_OTG_GINTMSK_USBSUSPM 0x00000800U /*!< USB suspend mask */
+#define USB_OTG_GINTMSK_USBRST 0x00001000U /*!< USB reset mask */
+#define USB_OTG_GINTMSK_ENUMDNEM 0x00002000U /*!< Enumeration done mask */
+#define USB_OTG_GINTMSK_ISOODRPM 0x00004000U /*!< Isochronous OUT packet dropped interrupt mask */
+#define USB_OTG_GINTMSK_EOPFM 0x00008000U /*!< End of periodic frame interrupt mask */
+#define USB_OTG_GINTMSK_EPMISM 0x00020000U /*!< Endpoint mismatch interrupt mask */
+#define USB_OTG_GINTMSK_IEPINT 0x00040000U /*!< IN endpoints interrupt mask */
+#define USB_OTG_GINTMSK_OEPINT 0x00080000U /*!< OUT endpoints interrupt mask */
+#define USB_OTG_GINTMSK_IISOIXFRM 0x00100000U /*!< Incomplete isochronous IN transfer mask */
+#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM 0x00200000U /*!< Incomplete periodic transfer mask */
+#define USB_OTG_GINTMSK_FSUSPM 0x00400000U /*!< Data fetch suspended mask */
+#define USB_OTG_GINTMSK_PRTIM 0x01000000U /*!< Host port interrupt mask */
+#define USB_OTG_GINTMSK_HCIM 0x02000000U /*!< Host channels interrupt mask */
+#define USB_OTG_GINTMSK_PTXFEM 0x04000000U /*!< Periodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_CIDSCHGM 0x10000000U /*!< Connector ID status change mask */
+#define USB_OTG_GINTMSK_DISCINT 0x20000000U /*!< Disconnect detected interrupt mask */
+#define USB_OTG_GINTMSK_SRQIM 0x40000000U /*!< Session request/new session detected interrupt mask */
+#define USB_OTG_GINTMSK_WUIM 0x80000000U /*!< Resume/remote wakeup detected interrupt mask */
+
+/******************** Bit definition forUSB_OTG_DAINT register ********************/
+#define USB_OTG_DAINT_IEPINT 0x0000FFFFU /*!< IN endpoint interrupt bits */
+#define USB_OTG_DAINT_OEPINT 0xFFFF0000U /*!< OUT endpoint interrupt bits */
+
+/******************** Bit definition forUSB_OTG_HAINTMSK register ********************/
+#define USB_OTG_HAINTMSK_HAINTM 0x0000FFFFU /*!< Channel interrupt mask */
+
+/******************** Bit definition for USB_OTG_GRXSTSP register ********************/
+#define USB_OTG_GRXSTSP_EPNUM 0x0000000FU /*!< IN EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_BCNT 0x00007FF0U /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_DPID 0x00018000U /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_PKTSTS 0x001E0000U /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DAINTMSK register ********************/
+#define USB_OTG_DAINTMSK_IEPM 0x0000FFFFU /*!< IN EP interrupt mask bits */
+#define USB_OTG_DAINTMSK_OEPM 0xFFFF0000U /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM 0x0000000FU /*!< Channel number */
+#define USB_OTG_CHNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 0x00000008U /*!<Bit 3 */
+#define USB_OTG_BCNT 0x00007FF0U /*!< Byte count */
+
+#define USB_OTG_DPID 0x00018000U /*!< Data PID */
+#define USB_OTG_DPID_0 0x00008000U /*!<Bit 0 */
+#define USB_OTG_DPID_1 0x00010000U /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS 0x001E0000U /*!< Packet status */
+#define USB_OTG_PKTSTS_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 0x00040000U /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 0x00080000U /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 0x00100000U /*!<Bit 3 */
+
+#define USB_OTG_EPNUM 0x0000000FU /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 0x00000008U /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM 0x01E00000U /*!< Frame number */
+#define USB_OTG_FRMNUM_0 0x00200000U /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 0x00400000U /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 0x00800000U /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 0x01000000U /*!<Bit 3 */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM 0x0000000FU /*!< Channel number */
+#define USB_OTG_CHNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 0x00000008U /*!<Bit 3 */
+#define USB_OTG_BCNT 0x00007FF0U /*!< Byte count */
+
+#define USB_OTG_DPID 0x00018000U /*!< Data PID */
+#define USB_OTG_DPID_0 0x00008000U /*!<Bit 0 */
+#define USB_OTG_DPID_1 0x00010000U /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS 0x001E0000U /*!< Packet status */
+#define USB_OTG_PKTSTS_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 0x00040000U /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 0x00080000U /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 0x00100000U /*!<Bit 3 */
+
+#define USB_OTG_EPNUM 0x0000000FU /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 0x00000008U /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM 0x01E00000U /*!< Frame number */
+#define USB_OTG_FRMNUM_0 0x00200000U /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 0x00400000U /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 0x00800000U /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 0x01000000U /*!<Bit 3 */
+
+/******************** Bit definition forUSB_OTG_GRXFSIZ register ********************/
+#define USB_OTG_GRXFSIZ_RXFD 0x0000FFFFU /*!< RxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSDIS register ********************/
+#define USB_OTG_DVBUSDIS_VBUSDT 0x0000FFFFU /*!< Device VBUS discharge time */
+
+/******************** Bit definition for OTG register ********************/
+#define USB_OTG_NPTXFSA 0x0000FFFFU /*!< Nonperiodic transmit RAM start address */
+#define USB_OTG_NPTXFD 0xFFFF0000U /*!< Nonperiodic TxFIFO depth */
+#define USB_OTG_TX0FSA 0x0000FFFFU /*!< Endpoint 0 transmit RAM start address */
+#define USB_OTG_TX0FD 0xFFFF0000U /*!< Endpoint 0 TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSPULSE register ********************/
+#define USB_OTG_DVBUSPULSE_DVBUSP 0x00000FFFU /*!< Device VBUS pulsing time */
+
+/******************** Bit definition forUSB_OTG_GNPTXSTS register ********************/
+#define USB_OTG_GNPTXSTS_NPTXFSAV 0x0000FFFFU /*!< Nonperiodic TxFIFO space available */
+
+#define USB_OTG_GNPTXSTS_NPTQXSAV 0x00FF0000U /*!< Nonperiodic transmit request queue space available */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_0 0x00010000U /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_1 0x00020000U /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_2 0x00040000U /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_3 0x00080000U /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_4 0x00100000U /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_5 0x00200000U /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_6 0x00400000U /*!<Bit 6 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_7 0x00800000U /*!<Bit 7 */
+
+#define USB_OTG_GNPTXSTS_NPTXQTOP 0x7F000000U /*!< Top of the nonperiodic transmit request queue */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_0 0x01000000U /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_1 0x02000000U /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_2 0x04000000U /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_3 0x08000000U /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_4 0x10000000U /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_5 0x20000000U /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_6 0x40000000U /*!<Bit 6 */
+
+/******************** Bit definition forUSB_OTG_DTHRCTL register ********************/
+#define USB_OTG_DTHRCTL_NONISOTHREN 0x00000001U /*!< Nonisochronous IN endpoints threshold enable */
+#define USB_OTG_DTHRCTL_ISOTHREN 0x00000002U /*!< ISO IN endpoint threshold enable */
+
+#define USB_OTG_DTHRCTL_TXTHRLEN 0x000007FCU /*!< Transmit threshold length */
+#define USB_OTG_DTHRCTL_TXTHRLEN_0 0x00000004U /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_1 0x00000008U /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_2 0x00000010U /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_3 0x00000020U /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_4 0x00000040U /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_5 0x00000080U /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_6 0x00000100U /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_7 0x00000200U /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_8 0x00000400U /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_RXTHREN 0x00010000U /*!< Receive threshold enable */
+
+#define USB_OTG_DTHRCTL_RXTHRLEN 0x03FE0000U /*!< Receive threshold length */
+#define USB_OTG_DTHRCTL_RXTHRLEN_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_1 0x00040000U /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_2 0x00080000U /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_3 0x00100000U /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_4 0x00200000U /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_5 0x00400000U /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_6 0x00800000U /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_7 0x01000000U /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_8 0x02000000U /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_ARPEN 0x08000000U /*!< Arbiter parking enable */
+
+/******************** Bit definition forUSB_OTG_DIEPEMPMSK register ********************/
+#define USB_OTG_DIEPEMPMSK_INEPTXFEM 0x0000FFFFU /*!< IN EP Tx FIFO empty interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DEACHINT register ********************/
+#define USB_OTG_DEACHINT_IEP1INT 0x00000002U /*!< IN endpoint 1interrupt bit */
+#define USB_OTG_DEACHINT_OEP1INT 0x00020000U /*!< OUT endpoint 1 interrupt bit */
+
+/******************** Bit definition forUSB_OTG_GCCFG register ********************/
+#define USB_OTG_GCCFG_PWRDWN 0x00010000U /*!< Power down */
+#define USB_OTG_GCCFG_I2CPADEN 0x00020000U /*!< Enable I2C bus connection for the external I2C PHY interface */
+#define USB_OTG_GCCFG_VBUSASEN 0x00040000U /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_VBUSBSEN 0x00080000U /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_SOFOUTEN 0x00100000U /*!< SOF output enable */
+#define USB_OTG_GCCFG_NOVBUSSENS 0x00200000U /*!< VBUS sensing disable option */
+
+/******************** Bit definition forUSB_OTG_DEACHINTMSK register ********************/
+#define USB_OTG_DEACHINTMSK_IEP1INTM 0x00000002U /*!< IN Endpoint 1 interrupt mask bit */
+#define USB_OTG_DEACHINTMSK_OEP1INTM 0x00020000U /*!< OUT Endpoint 1 interrupt mask bit */
+
+/******************** Bit definition forUSB_OTG_CID register ********************/
+#define USB_OTG_CID_PRODUCT_ID 0xFFFFFFFFU /*!< Product ID field */
+
+/******************** Bit definition forUSB_OTG_DIEPEACHMSK1 register ********************/
+#define USB_OTG_DIEPEACHMSK1_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_TOM 0x00000008U /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK 0x00000010U /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNMM 0x00000020U /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNEM 0x00000040U /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPEACHMSK1_TXFURM 0x00000100U /*!< FIFO underrun mask */
+#define USB_OTG_DIEPEACHMSK1_BIM 0x00000200U /*!< BNA interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_NAKM 0x00002000U /*!< NAK interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPRT register ********************/
+#define USB_OTG_HPRT_PCSTS 0x00000001U /*!< Port connect status */
+#define USB_OTG_HPRT_PCDET 0x00000002U /*!< Port connect detected */
+#define USB_OTG_HPRT_PENA 0x00000004U /*!< Port enable */
+#define USB_OTG_HPRT_PENCHNG 0x00000008U /*!< Port enable/disable change */
+#define USB_OTG_HPRT_POCA 0x00000010U /*!< Port overcurrent active */
+#define USB_OTG_HPRT_POCCHNG 0x00000020U /*!< Port overcurrent change */
+#define USB_OTG_HPRT_PRES 0x00000040U /*!< Port resume */
+#define USB_OTG_HPRT_PSUSP 0x00000080U /*!< Port suspend */
+#define USB_OTG_HPRT_PRST 0x00000100U /*!< Port reset */
+
+#define USB_OTG_HPRT_PLSTS 0x00000C00U /*!< Port line status */
+#define USB_OTG_HPRT_PLSTS_0 0x00000400U /*!<Bit 0 */
+#define USB_OTG_HPRT_PLSTS_1 0x00000800U /*!<Bit 1 */
+#define USB_OTG_HPRT_PPWR 0x00001000U /*!< Port power */
+
+#define USB_OTG_HPRT_PTCTL 0x0001E000U /*!< Port test control */
+#define USB_OTG_HPRT_PTCTL_0 0x00002000U /*!<Bit 0 */
+#define USB_OTG_HPRT_PTCTL_1 0x00004000U /*!<Bit 1 */
+#define USB_OTG_HPRT_PTCTL_2 0x00008000U /*!<Bit 2 */
+#define USB_OTG_HPRT_PTCTL_3 0x00010000U /*!<Bit 3 */
+
+#define USB_OTG_HPRT_PSPD 0x00060000U /*!< Port speed */
+#define USB_OTG_HPRT_PSPD_0 0x00020000U /*!<Bit 0 */
+#define USB_OTG_HPRT_PSPD_1 0x00040000U /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DOEPEACHMSK1 register ********************/
+#define USB_OTG_DOEPEACHMSK1_XFRCM 0x00000001U /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_EPDM 0x00000002U /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_TOM 0x00000008U /*!< Timeout condition mask */
+#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK 0x00000010U /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNMM 0x00000020U /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNEM 0x00000040U /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DOEPEACHMSK1_TXFURM 0x00000100U /*!< OUT packet error mask */
+#define USB_OTG_DOEPEACHMSK1_BIM 0x00000200U /*!< BNA interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_BERRM 0x00001000U /*!< Bubble error interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NAKM 0x00002000U /*!< NAK interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NYETM 0x00004000U /*!< NYET interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXFSIZ register ********************/
+#define USB_OTG_HPTXFSIZ_PTXSA 0x0000FFFFU /*!< Host periodic TxFIFO start address */
+#define USB_OTG_HPTXFSIZ_PTXFD 0xFFFF0000U /*!< Host periodic TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DIEPCTL register ********************/
+#define USB_OTG_DIEPCTL_MPSIZ 0x000007FFU /*!< Maximum packet size */
+#define USB_OTG_DIEPCTL_USBAEP 0x00008000U /*!< USB active endpoint */
+#define USB_OTG_DIEPCTL_EONUM_DPID 0x00010000U /*!< Even/odd frame */
+#define USB_OTG_DIEPCTL_NAKSTS 0x00020000U /*!< NAK status */
+
+#define USB_OTG_DIEPCTL_EPTYP 0x000C0000U /*!< Endpoint type */
+#define USB_OTG_DIEPCTL_EPTYP_0 0x00040000U /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_EPTYP_1 0x00080000U /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_STALL 0x00200000U /*!< STALL handshake */
+
+#define USB_OTG_DIEPCTL_TXFNUM 0x03C00000U /*!< TxFIFO number */
+#define USB_OTG_DIEPCTL_TXFNUM_0 0x00400000U /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_TXFNUM_1 0x00800000U /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_TXFNUM_2 0x01000000U /*!<Bit 2 */
+#define USB_OTG_DIEPCTL_TXFNUM_3 0x02000000U /*!<Bit 3 */
+#define USB_OTG_DIEPCTL_CNAK 0x04000000U /*!< Clear NAK */
+#define USB_OTG_DIEPCTL_SNAK 0x08000000U /*!< Set NAK */
+#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM 0x10000000U /*!< Set DATA0 PID */
+#define USB_OTG_DIEPCTL_SODDFRM 0x20000000U /*!< Set odd frame */
+#define USB_OTG_DIEPCTL_EPDIS 0x40000000U /*!< Endpoint disable */
+#define USB_OTG_DIEPCTL_EPENA 0x80000000U /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_HCCHAR register ********************/
+#define USB_OTG_HCCHAR_MPSIZ 0x000007FFU /*!< Maximum packet size */
+
+#define USB_OTG_HCCHAR_EPNUM 0x00007800U /*!< Endpoint number */
+#define USB_OTG_HCCHAR_EPNUM_0 0x00000800U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPNUM_1 0x00001000U /*!<Bit 1 */
+#define USB_OTG_HCCHAR_EPNUM_2 0x00002000U /*!<Bit 2 */
+#define USB_OTG_HCCHAR_EPNUM_3 0x00004000U /*!<Bit 3 */
+#define USB_OTG_HCCHAR_EPDIR 0x00008000U /*!< Endpoint direction */
+#define USB_OTG_HCCHAR_LSDEV 0x00020000U /*!< Low-speed device */
+
+#define USB_OTG_HCCHAR_EPTYP 0x000C0000U /*!< Endpoint type */
+#define USB_OTG_HCCHAR_EPTYP_0 0x00040000U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPTYP_1 0x00080000U /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_MC 0x00300000U /*!< Multi Count (MC) / Error Count (EC) */
+#define USB_OTG_HCCHAR_MC_0 0x00100000U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_MC_1 0x00200000U /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_DAD 0x1FC00000U /*!< Device address */
+#define USB_OTG_HCCHAR_DAD_0 0x00400000U /*!<Bit 0 */
+#define USB_OTG_HCCHAR_DAD_1 0x00800000U /*!<Bit 1 */
+#define USB_OTG_HCCHAR_DAD_2 0x01000000U /*!<Bit 2 */
+#define USB_OTG_HCCHAR_DAD_3 0x02000000U /*!<Bit 3 */
+#define USB_OTG_HCCHAR_DAD_4 0x04000000U /*!<Bit 4 */
+#define USB_OTG_HCCHAR_DAD_5 0x08000000U /*!<Bit 5 */
+#define USB_OTG_HCCHAR_DAD_6 0x10000000U /*!<Bit 6 */
+#define USB_OTG_HCCHAR_ODDFRM 0x20000000U /*!< Odd frame */
+#define USB_OTG_HCCHAR_CHDIS 0x40000000U /*!< Channel disable */
+#define USB_OTG_HCCHAR_CHENA 0x80000000U /*!< Channel enable */
+
+/******************** Bit definition forUSB_OTG_HCSPLT register ********************/
+
+#define USB_OTG_HCSPLT_PRTADDR 0x0000007FU /*!< Port address */
+#define USB_OTG_HCSPLT_PRTADDR_0 0x00000001U /*!<Bit 0 */
+#define USB_OTG_HCSPLT_PRTADDR_1 0x00000002U /*!<Bit 1 */
+#define USB_OTG_HCSPLT_PRTADDR_2 0x00000004U /*!<Bit 2 */
+#define USB_OTG_HCSPLT_PRTADDR_3 0x00000008U /*!<Bit 3 */
+#define USB_OTG_HCSPLT_PRTADDR_4 0x00000010U /*!<Bit 4 */
+#define USB_OTG_HCSPLT_PRTADDR_5 0x00000020U /*!<Bit 5 */
+#define USB_OTG_HCSPLT_PRTADDR_6 0x00000040U /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_HUBADDR 0x00003F80U /*!< Hub address */
+#define USB_OTG_HCSPLT_HUBADDR_0 0x00000080U /*!<Bit 0 */
+#define USB_OTG_HCSPLT_HUBADDR_1 0x00000100U /*!<Bit 1 */
+#define USB_OTG_HCSPLT_HUBADDR_2 0x00000200U /*!<Bit 2 */
+#define USB_OTG_HCSPLT_HUBADDR_3 0x00000400U /*!<Bit 3 */
+#define USB_OTG_HCSPLT_HUBADDR_4 0x00000800U /*!<Bit 4 */
+#define USB_OTG_HCSPLT_HUBADDR_5 0x00001000U /*!<Bit 5 */
+#define USB_OTG_HCSPLT_HUBADDR_6 0x00002000U /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_XACTPOS 0x0000C000U /*!< XACTPOS */
+#define USB_OTG_HCSPLT_XACTPOS_0 0x00004000U /*!<Bit 0 */
+#define USB_OTG_HCSPLT_XACTPOS_1 0x00008000U /*!<Bit 1 */
+#define USB_OTG_HCSPLT_COMPLSPLT 0x00010000U /*!< Do complete split */
+#define USB_OTG_HCSPLT_SPLITEN 0x80000000U /*!< Split enable */
+
+/******************** Bit definition forUSB_OTG_HCINT register ********************/
+#define USB_OTG_HCINT_XFRC 0x00000001U /*!< Transfer completed */
+#define USB_OTG_HCINT_CHH 0x00000002U /*!< Channel halted */
+#define USB_OTG_HCINT_AHBERR 0x00000004U /*!< AHB error */
+#define USB_OTG_HCINT_STALL 0x00000008U /*!< STALL response received interrupt */
+#define USB_OTG_HCINT_NAK 0x00000010U /*!< NAK response received interrupt */
+#define USB_OTG_HCINT_ACK 0x00000020U /*!< ACK response received/transmitted interrupt */
+#define USB_OTG_HCINT_NYET 0x00000040U /*!< Response received interrupt */
+#define USB_OTG_HCINT_TXERR 0x00000080U /*!< Transaction error */
+#define USB_OTG_HCINT_BBERR 0x00000100U /*!< Babble error */
+#define USB_OTG_HCINT_FRMOR 0x00000200U /*!< Frame overrun */
+#define USB_OTG_HCINT_DTERR 0x00000400U /*!< Data toggle error */
+
+/******************** Bit definition forUSB_OTG_DIEPINT register ********************/
+#define USB_OTG_DIEPINT_XFRC 0x00000001U /*!< Transfer completed interrupt */
+#define USB_OTG_DIEPINT_EPDISD 0x00000002U /*!< Endpoint disabled interrupt */
+#define USB_OTG_DIEPINT_TOC 0x00000008U /*!< Timeout condition */
+#define USB_OTG_DIEPINT_ITTXFE 0x00000010U /*!< IN token received when TxFIFO is empty */
+#define USB_OTG_DIEPINT_INEPNE 0x00000040U /*!< IN endpoint NAK effective */
+#define USB_OTG_DIEPINT_TXFE 0x00000080U /*!< Transmit FIFO empty */
+#define USB_OTG_DIEPINT_TXFIFOUDRN 0x00000100U /*!< Transmit Fifo Underrun */
+#define USB_OTG_DIEPINT_BNA 0x00000200U /*!< Buffer not available interrupt */
+#define USB_OTG_DIEPINT_PKTDRPSTS 0x00000800U /*!< Packet dropped status */
+#define USB_OTG_DIEPINT_BERR 0x00001000U /*!< Babble error interrupt */
+#define USB_OTG_DIEPINT_NAK 0x00002000U /*!< NAK interrupt */
+
+/******************** Bit definition forUSB_OTG_HCINTMSK register ********************/
+#define USB_OTG_HCINTMSK_XFRCM 0x00000001U /*!< Transfer completed mask */
+#define USB_OTG_HCINTMSK_CHHM 0x00000002U /*!< Channel halted mask */
+#define USB_OTG_HCINTMSK_AHBERR 0x00000004U /*!< AHB error */
+#define USB_OTG_HCINTMSK_STALLM 0x00000008U /*!< STALL response received interrupt mask */
+#define USB_OTG_HCINTMSK_NAKM 0x00000010U /*!< NAK response received interrupt mask */
+#define USB_OTG_HCINTMSK_ACKM 0x00000020U /*!< ACK response received/transmitted interrupt mask */
+#define USB_OTG_HCINTMSK_NYET 0x00000040U /*!< response received interrupt mask */
+#define USB_OTG_HCINTMSK_TXERRM 0x00000080U /*!< Transaction error mask */
+#define USB_OTG_HCINTMSK_BBERRM 0x00000100U /*!< Babble error mask */
+#define USB_OTG_HCINTMSK_FRMORM 0x00000200U /*!< Frame overrun mask */
+#define USB_OTG_HCINTMSK_DTERRM 0x00000400U /*!< Data toggle error mask */
+
+/******************** Bit definition for USB_OTG_DIEPTSIZ register ********************/
+
+#define USB_OTG_DIEPTSIZ_XFRSIZ 0x0007FFFFU /*!< Transfer size */
+#define USB_OTG_DIEPTSIZ_PKTCNT 0x1FF80000U /*!< Packet count */
+#define USB_OTG_DIEPTSIZ_MULCNT 0x60000000U /*!< Packet count */
+/******************** Bit definition forUSB_OTG_HCTSIZ register ********************/
+#define USB_OTG_HCTSIZ_XFRSIZ 0x0007FFFFU /*!< Transfer size */
+#define USB_OTG_HCTSIZ_PKTCNT 0x1FF80000U /*!< Packet count */
+#define USB_OTG_HCTSIZ_DOPING 0x80000000U /*!< Do PING */
+#define USB_OTG_HCTSIZ_DPID 0x60000000U /*!< Data PID */
+#define USB_OTG_HCTSIZ_DPID_0 0x20000000U /*!<Bit 0 */
+#define USB_OTG_HCTSIZ_DPID_1 0x40000000U /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DIEPDMA register ********************/
+#define USB_OTG_DIEPDMA_DMAADDR 0xFFFFFFFFU /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_HCDMA register ********************/
+#define USB_OTG_HCDMA_DMAADDR 0xFFFFFFFFU /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_DTXFSTS register ********************/
+#define USB_OTG_DTXFSTS_INEPTFSAV 0x0000FFFFU /*!< IN endpoint TxFIFO space avail */
+
+/******************** Bit definition forUSB_OTG_DIEPTXF register ********************/
+#define USB_OTG_DIEPTXF_INEPTXSA 0x0000FFFFU /*!< IN endpoint FIFOx transmit RAM start address */
+#define USB_OTG_DIEPTXF_INEPTXFD 0xFFFF0000U /*!< IN endpoint TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DOEPCTL register ********************/
+
+#define USB_OTG_DOEPCTL_MPSIZ 0x000007FFU /*!< Maximum packet size */ /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_USBAEP 0x00008000U /*!< USB active endpoint */
+#define USB_OTG_DOEPCTL_NAKSTS 0x00020000U /*!< NAK status */
+#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM 0x10000000U /*!< Set DATA0 PID */
+#define USB_OTG_DOEPCTL_SODDFRM 0x20000000U /*!< Set odd frame */
+#define USB_OTG_DOEPCTL_EPTYP 0x000C0000U /*!< Endpoint type */
+#define USB_OTG_DOEPCTL_EPTYP_0 0x00040000U /*!<Bit 0 */
+#define USB_OTG_DOEPCTL_EPTYP_1 0x00080000U /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_SNPM 0x00100000U /*!< Snoop mode */
+#define USB_OTG_DOEPCTL_STALL 0x00200000U /*!< STALL handshake */
+#define USB_OTG_DOEPCTL_CNAK 0x04000000U /*!< Clear NAK */
+#define USB_OTG_DOEPCTL_SNAK 0x08000000U /*!< Set NAK */
+#define USB_OTG_DOEPCTL_EPDIS 0x40000000U /*!< Endpoint disable */
+#define USB_OTG_DOEPCTL_EPENA 0x80000000U /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_DOEPINT register ********************/
+#define USB_OTG_DOEPINT_XFRC 0x00000001U /*!< Transfer completed interrupt */
+#define USB_OTG_DOEPINT_EPDISD 0x00000002U /*!< Endpoint disabled interrupt */
+#define USB_OTG_DOEPINT_STUP 0x00000008U /*!< SETUP phase done */
+#define USB_OTG_DOEPINT_OTEPDIS 0x00000010U /*!< OUT token received when endpoint disabled */
+#define USB_OTG_DOEPINT_B2BSTUP 0x00000040U /*!< Back-to-back SETUP packets received */
+#define USB_OTG_DOEPINT_NYET 0x00004000U /*!< NYET interrupt */
+
+/******************** Bit definition forUSB_OTG_DOEPTSIZ register ********************/
+
+#define USB_OTG_DOEPTSIZ_XFRSIZ 0x0007FFFFU /*!< Transfer size */
+#define USB_OTG_DOEPTSIZ_PKTCNT 0x1FF80000U /*!< Packet count */
+
+#define USB_OTG_DOEPTSIZ_STUPCNT 0x60000000U /*!< SETUP packet count */
+#define USB_OTG_DOEPTSIZ_STUPCNT_0 0x20000000U /*!<Bit 0 */
+#define USB_OTG_DOEPTSIZ_STUPCNT_1 0x40000000U /*!<Bit 1 */
+
+/******************** Bit definition for PCGCCTL register ********************/
+#define USB_OTG_PCGCCTL_STOPCLK 0x00000001U /*!< SETUP packet count */
+#define USB_OTG_PCGCCTL_GATECLK 0x00000002U /*!<Bit 0 */
+#define USB_OTG_PCGCCTL_PHYSUSP 0x00000010U /*!<Bit 1 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Stream0) || \
+ ((INSTANCE) == DMA1_Stream1) || \
+ ((INSTANCE) == DMA1_Stream2) || \
+ ((INSTANCE) == DMA1_Stream3) || \
+ ((INSTANCE) == DMA1_Stream4) || \
+ ((INSTANCE) == DMA1_Stream5) || \
+ ((INSTANCE) == DMA1_Stream6) || \
+ ((INSTANCE) == DMA1_Stream7) || \
+ ((INSTANCE) == DMA2_Stream0) || \
+ ((INSTANCE) == DMA2_Stream1) || \
+ ((INSTANCE) == DMA2_Stream2) || \
+ ((INSTANCE) == DMA2_Stream3) || \
+ ((INSTANCE) == DMA2_Stream4) || \
+ ((INSTANCE) == DMA2_Stream5) || \
+ ((INSTANCE) == DMA2_Stream6) || \
+ ((INSTANCE) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOH))
+
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2) || \
+ ((INSTANCE) == I2C3))
+
+/******************************** I2S Instances *******************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3))
+
+/*************************** I2S Extended Instances ***************************/
+#define IS_I2S_ALL_INSTANCE_EXT(PERIPH) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4))
+
+/*************************** SPI Extended Instances ***************************/
+#define IS_SPI_ALL_INSTANCE_EXT(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) ((INSTANCE) == TIM1)
+
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5))
+
+/***************** TIM Instances : external trigger input availabe ************/
+#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM4) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM5) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM9) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM10) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM11) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/*********************** PCD Instances ****************************************/
+#define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+
+/*********************** HCD Instances ****************************************/
+#define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/****************************** SDIO Instances ********************************/
+#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO)
+
+/****************************** USB Exported Constants ************************/
+#define USB_OTG_FS_HOST_MAX_CHANNEL_NBR 8U
+#define USB_OTG_FS_MAX_IN_ENDPOINTS 4U /* Including EP0 */
+#define USB_OTG_FS_MAX_OUT_ENDPOINTS 4U /* Including EP0 */
+#define USB_OTG_FS_TOTAL_FIFO_SIZE 1280U /* in Bytes */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F401xC_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,264 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.5.0
+ * @date 22-April-2016
+ * @brief CMSIS STM32F4xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F4xx device used in the target application
+ * - To use or not the peripheral's drivers in application code(i.e.
+ * code will be based on direct access to peripheral's registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx
+ * @{
+ */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F4)
+#define STM32F4
+#endif /* STM32F4 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+ !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+ !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F410Tx) && !defined (STM32F410Cx) && \
+ !defined (STM32F410Rx) && !defined (STM32F411xE) && !defined (STM32F446xx) && !defined (STM32F469xx) && \
+ !defined (STM32F479xx) && !defined (STM32F412Cx) && !defined (STM32F412Rx) && !defined (STM32F412Vx) && \
+ !defined (STM32F412Zx)
+ /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+ /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+ /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */
+ /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+ /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+ /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+ /* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
+ STM32F439NI, STM32F429IG and STM32F429II Devices */
+ /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
+ STM32F439NI, STM32F439IG and STM32F439II Devices */
+ #define STM32F401xC /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+ /* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+ /* #define STM32F410Tx */ /*!< STM32F410T8 and STM32F410TB Devices */
+ /* #define STM32F410Cx */ /*!< STM32F410C8 and STM32F410CB Devices */
+ /* #define STM32F410Rx */ /*!< STM32F410R8 and STM32F410RB Devices */
+ /* #define STM32F411xE */ /*!< STM32F411CC, STM32F411RC, STM32F411VC, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+ /* #define STM32F446xx */ /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC,
+ and STM32F446ZE Devices */
+ /* #define STM32F469xx */ /*!< STM32F469AI, STM32F469II, STM32F469BI, STM32F469NI, STM32F469AG, STM32F469IG, STM32F469BG,
+ STM32F469NG, STM32F469AE, STM32F469IE, STM32F469BE and STM32F469NE Devices */
+ /* #define STM32F479xx */ /*!< STM32F479AI, STM32F479II, STM32F479BI, STM32F479NI, STM32F479AG, STM32F479IG, STM32F479BG
+ and STM32F479NG Devices */
+ /* #define STM32F412Cx */ /*!< STM32F412CEU and STM32F412CGU Devices */
+ /* #define STM32F412Zx */ /*!< STM32F412ZET, STM32F412ZGT, STM32F412ZEJ and STM32F412ZGJ Devices */
+ /* #define STM32F412Vx */ /*!< STM32F412VET, STM32F412VGT, STM32F412VEH and STM32F412VGH Devices */
+ /* #define STM32F412Rx */ /*!< STM32F412RET, STM32F412RGT, STM32F412REY and STM32F412RGY Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ #define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS version number V2.5.0
+ */
+#define __STM32F4xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_VERSION_SUB1 (0x05U) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
+#define __STM32F4xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
+#define __STM32F4xx_CMSIS_VERSION ((__STM32F4xx_CMSIS_VERSION_MAIN << 24)\
+ |(__STM32F4xx_CMSIS_VERSION_SUB1 << 16)\
+ |(__STM32F4xx_CMSIS_VERSION_SUB2 << 8 )\
+ |(__STM32F4xx_CMSIS_VERSION))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F405xx)
+ #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+ #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+ #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+ #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+ #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+ #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+ #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+ #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+ #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+ #include "stm32f401xe.h"
+#elif defined(STM32F410Tx)
+ #include "stm32f410tx.h"
+#elif defined(STM32F410Cx)
+ #include "stm32f410cx.h"
+#elif defined(STM32F410Rx)
+ #include "stm32f410rx.h"
+#elif defined(STM32F411xE)
+ #include "stm32f411xe.h"
+#elif defined(STM32F446xx)
+ #include "stm32f446xx.h"
+#elif defined(STM32F469xx)
+ #include "stm32f469xx.h"
+#elif defined(STM32F479xx)
+ #include "stm32f479xx.h"
+#elif defined(STM32F412Cx)
+ #include "stm32f412cx.h"
+#elif defined(STM32F412Zx)
+ #include "stm32f412zx.h"
+#elif defined(STM32F412Rx)
+ #include "stm32f412rx.h"
+#elif defined(STM32F412Vx)
+ #include "stm32f412vx.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0U,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0U,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0U,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,449 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf.h
+ * @author MCD Application Team
+ * @version V1.4.4
+ * @date 22-January-2016
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32f4xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_DSI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_FMPI2C_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)200U) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 1U
+#define INSTRUCTION_CACHE_ENABLE 1U
+#define DATA_CACHE_ENABLE 1U
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2U
+#define MAC_ADDR1 0U
+#define MAC_ADDR2 0U
+#define MAC_ADDR3 0U
+#define MAC_ADDR4 0U
+#define MAC_ADDR5 0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS 0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x0010U) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x0011U) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x0012U) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001U) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002U) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001U) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020U) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000U) /*!< PHY link status interrupt mask */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,943 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.c
+ * @author MCD Application Team
+ * @version V2.5.0
+ * @date 22-April-2016
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f4xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * This file configures the system clock as follows:
+ *-----------------------------------------------------------------------------
+ * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
+ * | (external 8 MHz clock) | (internal 16 MHz)
+ * | 2- PLL_HSE_XTAL |
+ * | (external 8 MHz xtal) |
+ *-----------------------------------------------------------------------------
+ * SYSCLK(MHz) | 84 | 84
+ *-----------------------------------------------------------------------------
+ * AHBCLK (MHz) | 84 | 84
+ *-----------------------------------------------------------------------------
+ * APB1CLK (MHz) | 42 | 42
+ *-----------------------------------------------------------------------------
+ * APB2CLK (MHz) | 84 | 84
+ *-----------------------------------------------------------------------------
+ * USB capable (48 MHz precise clock) | YES | NO
+ *-----------------------------------------------------------------------------
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f4xx.h"
+#include "hal_tick.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+ STM32F412Zx || STM32F412Vx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+ * @{
+ */
+
+/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
+#define USE_PLL_HSE_EXTC (0) /* Use external clock */
+#define USE_PLL_HSE_XTAL (0) /* Use external xtal */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+uint32_t SystemCoreClock = 84000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+uint8_t SetSysClock_PLL_HSI(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting, vector table location and External memory
+ * configuration.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+ /* Configure the Cube driver */
+ SystemCoreClock = 16000000; // At this stage the HSI is used as system clock
+ HAL_Init();
+
+ /* Configure the System clock source, PLL Multiplier and Divider factors,
+ AHB/APBx prescalers and Flash settings */
+ SetSysClock();
+
+ /* Reset the timer to avoid issues after the RAM initialization */
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+ * depends on the application requirements), user has to ensure that HSE_VALUE
+ * is same as the real frequency of the crystal used. Otherwise, this function
+ * may have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+ SYSCLK = PLL_VCO / PLL_P
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ SystemCoreClock = pllvco/pllp;
+ break;
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK frequency --------------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK frequency */
+ SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||defined(STM32F469xx) || defined(STM32F479xx)
+
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f4xx.s before jump to main.
+ * This function configures the external memories (SRAM/SDRAM)
+ * This SRAM/SDRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmp = 0x00;
+
+ register uint32_t tmpreg = 0, timeout = 0xFFFF;
+ register __IO uint32_t index;
+
+ /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+ RCC->AHB1ENR |= 0x000001F8;
+
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x00CCC0CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A8A;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0FCF;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00CC0CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA828A;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC3CF;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0xCCCCCCCC;
+ GPIOF->AFR[1] = 0xCCCCCCCC;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA800AAA;
+ /* Configure PFx pins speed to 50 MHz */
+ GPIOF->OSPEEDR = 0xAA800AAA;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0xCCCCCCCC;
+ GPIOG->AFR[1] = 0xCCCCCCCC;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0xAAAAAAAA;
+ /* Configure PGx pins speed to 50 MHz */
+ GPIOG->OSPEEDR = 0xAAAAAAAA;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+ /* Connect PHx pins to FMC Alternate function */
+ GPIOH->AFR[0] = 0x00C0CC00;
+ GPIOH->AFR[1] = 0xCCCCCCCC;
+ /* Configure PHx pins in Alternate function mode */
+ GPIOH->MODER = 0xAAAA08A0;
+ /* Configure PHx pins speed to 50 MHz */
+ GPIOH->OSPEEDR = 0xAAAA08A0;
+ /* Configure PHx pins Output type to push-pull */
+ GPIOH->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PHx pins */
+ GPIOH->PUPDR = 0x00000000;
+
+ /* Connect PIx pins to FMC Alternate function */
+ GPIOI->AFR[0] = 0xCCCCCCCC;
+ GPIOI->AFR[1] = 0x00000CC0;
+ /* Configure PIx pins in Alternate function mode */
+ GPIOI->MODER = 0x0028AAAA;
+ /* Configure PIx pins speed to 50 MHz */
+ GPIOI->OSPEEDR = 0x0028AAAA;
+ /* Configure PIx pins Output type to push-pull */
+ GPIOI->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PIx pins */
+ GPIOI->PUPDR = 0x00000000;
+
+/*-- FMC Configuration -------------------------------------------------------*/
+ /* Enable the FMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+ FMC_Bank5_6->SDCR[0] = 0x000019E4;
+ FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+ /* SDRAM initialization sequence */
+ /* Clock enable command */
+ FMC_Bank5_6->SDCMR = 0x00000011;
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Delay */
+ for (index = 0; index<1000; index++);
+
+ /* PALL command */
+ FMC_Bank5_6->SDCMR = 0x00000012;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Auto refresh command */
+ FMC_Bank5_6->SDCMR = 0x00000073;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* MRD register program */
+ FMC_Bank5_6->SDCMR = 0x00046014;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Set refresh count */
+ tmpreg = FMC_Bank5_6->SDRTR;
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+
+ /* Disable write protection */
+ tmpreg = FMC_Bank5_6->SDCR[0];
+ FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001011;
+ FMC_Bank1->BTCR[3] = 0x00000201;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001091;
+ FMC_Bank1->BTCR[3] = 0x00110212;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+ (void)(tmp);
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f4xx.s before jump to main.
+ * This function configures the external memories (SRAM/SDRAM)
+ * This SRAM/SDRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+ register uint32_t tmpreg = 0, timeout = 0xFFFF;
+ register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+ /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+ clock */
+ RCC->AHB1ENR |= 0x0000007D;
+#else
+ /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+ clock */
+ RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+#if defined(STM32F446xx)
+ /* Connect PAx pins to FMC Alternate function */
+ GPIOA->AFR[0] |= 0xC0000000;
+ GPIOA->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOA->MODER |= 0x00008000;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOA->OSPEEDR |= 0x00008000;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOA->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOA->PUPDR |= 0x00000000;
+
+ /* Connect PCx pins to FMC Alternate function */
+ GPIOC->AFR[0] |= 0x00CC0000;
+ GPIOC->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOC->MODER |= 0x00000A00;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOC->OSPEEDR |= 0x00000A00;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOC->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOC->PUPDR |= 0x00000000;
+#endif /* STM32F446xx */
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x000000CC;
+ GPIOD->AFR[1] = 0xCC000CCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xA02A000A;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOD->OSPEEDR = 0xA02A000A;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00000CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA800A;
+ /* Configure PEx pins speed to 50 MHz */
+ GPIOE->OSPEEDR = 0xAAAA800A;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0xCCCCCCCC;
+ GPIOF->AFR[1] = 0xCCCCCCCC;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA800AAA;
+ /* Configure PFx pins speed to 50 MHz */
+ GPIOF->OSPEEDR = 0xAA800AAA;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0xCCCCCCCC;
+ GPIOG->AFR[1] = 0xCCCCCCCC;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0xAAAAAAAA;
+ /* Configure PGx pins speed to 50 MHz */
+ GPIOG->OSPEEDR = 0xAAAAAAAA;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+ /* Connect PHx pins to FMC Alternate function */
+ GPIOH->AFR[0] = 0x00C0CC00;
+ GPIOH->AFR[1] = 0xCCCCCCCC;
+ /* Configure PHx pins in Alternate function mode */
+ GPIOH->MODER = 0xAAAA08A0;
+ /* Configure PHx pins speed to 50 MHz */
+ GPIOH->OSPEEDR = 0xAAAA08A0;
+ /* Configure PHx pins Output type to push-pull */
+ GPIOH->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PHx pins */
+ GPIOH->PUPDR = 0x00000000;
+
+ /* Connect PIx pins to FMC Alternate function */
+ GPIOI->AFR[0] = 0xCCCCCCCC;
+ GPIOI->AFR[1] = 0x00000CC0;
+ /* Configure PIx pins in Alternate function mode */
+ GPIOI->MODER = 0x0028AAAA;
+ /* Configure PIx pins speed to 50 MHz */
+ GPIOI->OSPEEDR = 0x0028AAAA;
+ /* Configure PIx pins Output type to push-pull */
+ GPIOI->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PIx pins */
+ GPIOI->PUPDR = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+/*-- FMC Configuration -------------------------------------------------------*/
+ /* Enable the FMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+ /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else
+ FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+ FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+ /* SDRAM initialization sequence */
+ /* Clock enable command */
+ FMC_Bank5_6->SDCMR = 0x00000011;
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Delay */
+ for (index = 0; index<1000; index++);
+
+ /* PALL command */
+ FMC_Bank5_6->SDCMR = 0x00000012;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Auto refresh command */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x000000F3;
+#else
+ FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* MRD register program */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x00044014;
+#else
+ FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Set refresh count */
+ tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+
+ /* Disable write protection */
+ tmpreg = FMC_Bank5_6->SDCR[0];
+ FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+ RCC->AHB1ENR |= 0x00000078;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x00CCC0CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A8A;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0FCF;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00CC0CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA828A;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC3CF;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0x00CCCCCC;
+ GPIOF->AFR[1] = 0xCCCC0000;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA000AAA;
+ /* Configure PFx pins speed to 100 MHz */
+ GPIOF->OSPEEDR = 0xFF000FFF;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0x00CCCCCC;
+ GPIOG->AFR[1] = 0x000000C0;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0x00085AAA;
+ /* Configure PGx pins speed to 100 MHz */
+ GPIOG->OSPEEDR = 0x000CAFFF;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+ /* Enable the FMC/FSMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001011;
+ FMC_Bank1->BTCR[3] = 0x00000201;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001091;
+ FMC_Bank1->BTCR[3] = 0x00110212;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+ || defined(STM32F412Zx) || defined(STM32F412Vx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FSMC_Bank1->BTCR[2] = 0x00001011;
+ FSMC_Bank1->BTCR[3] = 0x00000201;
+ FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
+ (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+
+/**
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
+void SetSysClock(void)
+{
+ /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+ if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+ {
+ /* 2- If fail try to start with HSE and external xtal */
+ #if USE_PLL_HSE_XTAL != 0
+ if (SetSysClock_PLL_HSE(0) == 0)
+ #endif
+ {
+ /* 3- If fail start with HSI clock */
+ if (SetSysClock_PLL_HSI() == 0)
+ {
+ while(1)
+ {
+ // [TODO] Put something here to tell the user that a problem occured...
+ }
+ }
+ }
+ }
+
+ /* Output clock on MCO2 pin(PC9) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_1); // 84 MHz
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/* PLL (clocked by HSE) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+ /* Enable HSE oscillator and activate PLL with HSE as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ if (bypass == 0)
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */
+ }
+ else
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */
+ }
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLM = 8; // VCO input clock = 1 MHz (8 MHz / 8)
+ RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> OK for USB
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ /*
+ if (bypass == 0)
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
+ else
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
+ */
+
+ return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/* PLL (clocked by HSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+ /* Enable HSI oscillator and activate PLL with HSI as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSICalibrationValue = 16;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16)
+ RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV8; // PLLCLK = 84 MHz (336 MHz / 4)
+ RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> freq is ok but not precise enough
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
+
+ return 1; // OK
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/system_stm32f4xx.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,124 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.5.0
+ * @date 22-April-2016
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F4XX_H
+#define __SYSTEM_STM32F4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F4xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F4xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F4XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32_hal_legacy.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32_hal_legacy.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,3123 @@
+/**
+ ******************************************************************************
+ * @file stm32_hal_legacy.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file contains aliases definition for the STM32Cube HAL constants
+ * macros and functions maintained for legacy purpose.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_HAL_LEGACY
+#define __STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define AES_FLAG_RDERR CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP ADC_REGULAR_GROUP
+#define INJECTED_GROUP ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT ADC_AWD_EVENT
+#define AWD1_EVENT ADC_AWD1_EVENT
+#define AWD2_EVENT ADC_AWD2_EVENT
+#define AWD3_EVENT ADC_AWD3_EVENT
+#define OVR_EVENT ADC_OVR_EVENT
+#define JQOVF_EVENT ADC_JQOVF_EVENT
+#define ALL_CHANNELS ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5
+
+#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32L0) || defined(STM32L4)
+#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1
+#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2
+#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3
+
+#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT
+#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3
+#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4
+#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5
+
+#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW
+#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH
+
+/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */
+/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */
+#if defined(COMP_CSR_LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_LOCK
+#elif defined(COMP_CSR_COMP1LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK
+#elif defined(COMP_CSR_COMPxLOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK
+#endif
+
+#if defined(STM32L4)
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2
+#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2
+#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2
+#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE
+#endif
+
+#if defined(STM32L0)
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER
+#else
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED
+#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER
+#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER
+#endif
+
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1
+#define DAC_WAVE_NONE ((uint32_t)0x00000000U)
+#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5
+#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4
+#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7
+#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67
+#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76
+#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6
+#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7
+#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6
+
+#define IS_HAL_REMAPDMA IS_DMA_REMAP
+#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE
+
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW OB_IWDG_SW
+#define OB_WDG_HW OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
+/**
+ * @}
+ */
+
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+ * @{
+ */
+#if defined(STM32L4) || defined(STM32F7)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16
+#else
+#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+ * @}
+ */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define GET_GPIO_SOURCE GPIO_GET_INDEX
+#define GET_GPIO_INDEX GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7)
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 */
+
+#if defined(STM32L1)
+ #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L1 */
+
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F0 || STM32F3 || STM32F1 */
+
+#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+
+#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define KR_KEY_RELOAD IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE IWDG_KEY_ENABLE
+#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b
+#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b
+#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b
+#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b
+
+#define NAND_AddressTypedef NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE NOR_WRITE
+#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+#if defined(STM32F7)
+ #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ATA_DATA
+#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD ATA_CARD_HEAD
+#define CF_STATUS_CMD ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FORMAT_BIN RTC_FORMAT_BIN
+#define FORMAT_BCD RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+
+#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
+#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
+#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1 TIM_DMABASE_CR1
+#define TIM_DMABase_CR2 TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER TIM_DMABASE_DIER
+#define TIM_DMABase_SR TIM_DMABASE_SR
+#define TIM_DMABase_EGR TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER TIM_DMABASE_CCER
+#define TIM_DMABase_CNT TIM_DMABASE_CNT
+#define TIM_DMABase_PSC TIM_DMABASE_PSC
+#define TIM_DMABase_ARR TIM_DMABASE_ARR
+#define TIM_DMABase_RCR TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1 TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2 TIM_DMABASE_OR2
+#define TIM_DMABase_OR3 TIM_DMABASE_OR3
+#define TIM_DMABase_OR TIM_DMABASE_OR
+
+#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
+
+#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED USART_NACK_ENABLE
+#define USARTNACK_DISABLED USART_NACK_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CFR_BASE WWDG_CFR_BASE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U)
+#define CAN_TXSTATUS_OK ((uint8_t)0x01U)
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define VLAN_TAG ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR ((uint32_t)0x00000100U)
+#define ETH_MMCRIR ((uint32_t)0x00000104U)
+#define ETH_MMCTIR ((uint32_t)0x00000108U)
+#define ETH_MMCRIMR ((uint32_t)0x0000010CU)
+#define ETH_MMCTIMR ((uint32_t)0x00000110U)
+#define ETH_MMCTGFSCCR ((uint32_t)0x0000014CU)
+#define ETH_MMCTGFMSCCR ((uint32_t)0x00000150U)
+#define ETH_MMCTGFCR ((uint32_t)0x00000168U)
+#define ETH_MMCRFCECR ((uint32_t)0x00000194U)
+#define ETH_MMCRFAECR ((uint32_t)0x00000198U)
+#define ETH_MMCRGUFCR ((uint32_t)0x000001C4U)
+
+#define ETH_MAC_TXFIFO_FULL ((uint32_t)0x02000000) /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY ((uint32_t)0x01000000) /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE ((uint32_t)0x00400000) /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE ((uint32_t)0x00000000) /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ ((uint32_t)0x00100000) /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING ((uint32_t)0x00200000) /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING ((uint32_t)0x00300000) /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE ((uint32_t)0x00080000) /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE ((uint32_t)0x00000000) /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING ((uint32_t)0x00020000) /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF ((uint32_t)0x00040000) /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING ((uint32_t)0x00060000) /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE ((uint32_t)0x00010000) /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY ((uint32_t)0x00000000) /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD ((uint32_t)0x00000100) /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD ((uint32_t)0x00000200) /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL ((uint32_t)0x00000300) /* Rx FIFO fill level: full */
+#if defined(STM32F1)
+#else
+#define ETH_MAC_READCONTROLLER_IDLE ((uint32_t)0x00000000) /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA ((uint32_t)0x00000020) /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS ((uint32_t)0x00000040) /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#endif
+#define ETH_MAC_READCONTROLLER_FLUSHING ((uint32_t)0x00000060) /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE ((uint32_t)0x00000010) /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE ((uint32_t)0x00000000) /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE ((uint32_t)0x00000002) /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004) /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE ((uint32_t)0x00000006) /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE ((uint32_t)0x00000001) /* MAC MII receive protocol engine active */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR
+#define DCMI_IT_OVF DCMI_IT_OVR
+#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI
+#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI
+
+#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop
+#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop
+#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop
+
+/**
+ * @}
+ */
+
+#if defined(STM32L4xx) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888
+#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888
+#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565
+#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555
+#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444
+
+#define CM_ARGB8888 DMA2D_INPUT_ARGB8888
+#define CM_RGB888 DMA2D_INPUT_RGB888
+#define CM_RGB565 DMA2D_INPUT_RGB565
+#define CM_ARGB1555 DMA2D_INPUT_ARGB1555
+#define CM_ARGB4444 DMA2D_INPUT_ARGB4444
+#define CM_L8 DMA2D_INPUT_L8
+#define CM_AL44 DMA2D_INPUT_AL44
+#define CM_AL88 DMA2D_INPUT_AL88
+#define CM_L4 DMA2D_INPUT_L4
+#define CM_A8 DMA2D_INPUT_A8
+#define CM_A4 DMA2D_INPUT_A4
+/**
+ * @}
+ */
+#endif /* STM32L4xx || STM32F7*/
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#if defined(STM32L0)
+#else
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#endif
+#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
+#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
+#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+ * @{
+ */
+#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
+
+#define DBP_BitNumber DBP_BIT_NUMBER
+#define PVDE_BitNumber PVDE_BIT_NUMBER
+#define PMODE_BitNumber PMODE_BIT_NUMBER
+#define EWUP_BitNumber EWUP_BIT_NUMBER
+#define FPDS_BitNumber FPDS_BIT_NUMBER
+#define ODEN_BitNumber ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
+#define BRE_BitNumber BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError TIM_DMAError
+#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define AES_IT_CC CRYP_IT_CC
+#define AES_IT_ERR CRYP_IT_ERR
+#define AES_FLAG_CCF CRYP_FLAG_CCF
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
+
+#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __ADC_ENABLE __HAL_ADC_ENABLE
+#define __ADC_DISABLE __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
+#define __ADC_IS_ENABLED ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1 ADC_SQR1
+#define __HAL_ADC_SMPR1 ADC_SMPR1
+#define __HAL_ADC_SMPR2 ADC_SMPR2
+#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32F3)
+#define COMP_START __HAL_COMP_ENABLE
+#define COMP_STOP __HAL_COMP_DISABLE
+#define COMP_LOCK __HAL_COMP_LOCK
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
+
+#if defined(STM32L0) || defined(STM32L4)
+/* Note: On these STM32 families, the only argument of this macro */
+/* is COMP_FLAG_LOCK. */
+/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */
+/* argument. */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__))
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32L0) || defined(STM32L4)
+/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_WRPAREA IS_OB_WRPAREA
+#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE IS_FLASH_TYPEERASE
+#define IS_NBSECTORS IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
+#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
+#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
+#define __HAL_I2C_SPEED I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __IRDA_DISABLE __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+ * @{
+ */
+
+#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE __HAL_RCC_USART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE __HAL_RCC_USART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_USART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_USART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET __HAL_RCC_USART4_FORCE_RESET
+#define __USART4_RELEASE_RESET __HAL_RCC_USART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE __HAL_RCC_USART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE __HAL_RCC_USART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_USART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_USART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET __HAL_RCC_USART5_FORCE_RESET
+#define __USART5_RELEASE_RESET __HAL_RCC_USART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE __HAL_RCC_USART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE __HAL_RCC_USART7_CLK_ENABLE
+#define __USART7_FORCE_RESET __HAL_RCC_USART7_FORCE_RESET
+#define __USART7_RELEASE_RESET __HAL_RCC_USART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE __HAL_RCC_USART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE __HAL_RCC_USART8_CLK_ENABLE
+#define __USART8_FORCE_RESET __HAL_RCC_USART8_FORCE_RESET
+#define __USART8_RELEASE_RESET __HAL_RCC_USART8_RELEASE_RESET
+#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14 RCC_IT_HSI14RDY
+
+#if defined(STM32L0)
+#define RCC_IT_LSECSS RCC_IT_CSSLSE
+#define RCC_IT_CSS RCC_IT_CSSHSE
+#endif
+
+#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV RCC_MCODIV_1
+#define RCC_MCO_DIV1 RCC_MCODIV_1
+#define RCC_MCO_DIV2 RCC_MCODIV_2
+#define RCC_MCO_DIV4 RCC_MCODIV_4
+#define RCC_MCO_DIV8 RCC_MCODIV_8
+#define RCC_MCO_DIV16 RCC_MCODIV_16
+#define RCC_MCO_DIV32 RCC_MCODIV_32
+#define RCC_MCO_DIV64 RCC_MCODIV_64
+#define RCC_MCO_DIV128 RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
+
+#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB RCC_CR_HSION_BB
+#define CR_CSSON_BB RCC_CR_CSSON_BB
+#define CR_PLLON_BB RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB RCC_CR_MSION_BB
+#define CSR_LSION_BB RCC_CSR_LSION_BB
+#define CSR_LSEON_BB RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB RCC_CR_HSEON_BB
+#define CSR_RMVF_BB RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT
+
+#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN
+#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF
+
+#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48
+#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ
+#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP
+#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ
+#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE
+#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48
+
+#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE
+#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED
+#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET
+#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET
+#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
+#define DfsdmClockSelection Dfsdm1ClockSelection
+#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1
+#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK
+#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK
+#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG
+#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif /* STM32F1 */
+
+#define IS_ALARM IS_RTC_ALARM
+#define IS_ALARM_MASK IS_RTC_ALARM_MASK
+#define IS_TAMPER IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4)
+#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
+#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
+#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED
+#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION
+#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND
+#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT
+#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED
+#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE
+#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE
+#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE
+#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
+#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT
+#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT
+#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG
+#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG
+#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT
+#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT
+#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS
+#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT
+#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define SDMMC1_IRQn SDIO_IRQn
+#define SDMMC1_IRQHandler SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define SD_SDIO_DISABLED SD_SDMMC_DISABLED
+#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY
+#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED
+#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION
+#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND
+#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT
+#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED
+#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE
+#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE
+#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE
+#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE
+#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT
+#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT
+#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG
+#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG
+#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT
+#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT
+#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS
+#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT
+#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define SDIO_IRQn SDMMC1_IRQn
+#define SDIO_IRQHandler SDMMC1_IRQHandler
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
+#define __USART_ENABLE __HAL_USART_ENABLE
+#define __USART_DISABLE __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
+
+#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
+#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1
+#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_cec.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,670 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cec.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief CEC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the High Definition Multimedia Interface
+ * Consumer Electronics Control Peripheral (CEC).
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ *
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The CEC HAL driver can be used as follow:
+
+ (#) Declare a CEC_HandleTypeDef handle structure.
+ (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API:
+ (##) Enable the CEC interface clock.
+ (##) CEC pins configuration:
+ (+) Enable the clock for the CEC GPIOs.
+ (+) Configure these CEC pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT()
+ and HAL_CEC_Receive_IT() APIs):
+ (+) Configure the CEC interrupt priority.
+ (+) Enable the NVIC CEC IRQ handle.
+ (@) The specific CEC interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit
+ and receive process.
+
+ (#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in
+ in case of Bit Rising Error, Error-Bit generation conditions, device logical
+ address and Listen mode in the hcec Init structure.
+
+ (#) Initialize the CEC registers by calling the HAL_CEC_Init() API.
+
+ (@) This API (HAL_CEC_Init()) configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customed HAL_CEC_MspInit() API.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CEC CEC
+ * @brief HAL CEC module driver
+ * @{
+ */
+#ifdef HAL_CEC_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CEC_Exported_Functions CEC Exported Functions
+ * @{
+ */
+
+/** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the CEC
+ (+) The following parameters need to be configured:
+ (++) SignalFreeTime
+ (++) Tolerance
+ (++) BRERxStop (RX stopped or not upon Bit Rising Error)
+ (++) BREErrorBitGen (Error-Bit generation in case of Bit Rising Error)
+ (++) LBPEErrorBitGen (Error-Bit generation in case of Long Bit Period Error)
+ (++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error)
+ (++) SignalFreeTimeOption (SFT Timer start definition)
+ (++) OwnAddress (CEC device address)
+ (++) ListenMode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CEC mode according to the specified
+ * parameters in the CEC_InitTypeDef and creates the associated handle .
+ * @param hcec: CEC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec)
+{
+ /* Check the CEC handle allocation */
+ if((hcec == NULL) ||(hcec->Init.RxBuffer == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+ assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime));
+ assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance));
+ assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop));
+ assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen));
+ assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen));
+ assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen));
+ assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption));
+ assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode));
+ assert_param(IS_CEC_OWN_ADDRESS(hcec->Init.OwnAddress));
+
+ if(hcec->gState == HAL_CEC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hcec->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_CEC_MspInit(hcec);
+ }
+ hcec->gState = HAL_CEC_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ /* Write to CEC Control Register */
+ hcec->Instance->CFGR = hcec->Init.SignalFreeTime | hcec->Init.Tolerance | hcec->Init.BRERxStop|\
+ hcec->Init.BREErrorBitGen | hcec->Init.LBPEErrorBitGen | hcec->Init.BroadcastMsgNoErrorBitGen |\
+ hcec->Init.SignalFreeTimeOption |((uint32_t)(hcec->Init.OwnAddress)<<16U) |\
+ hcec->Init.ListenMode;
+
+ /* Enable the following CEC Transmission/Reception interrupts as
+ * well as the following CEC Transmission/Reception Errors interrupts
+ * Rx Byte Received IT
+ * End of Reception IT
+ * Rx overrun
+ * Rx bit rising error
+ * Rx short bit period error
+ * Rx long bit period error
+ * Rx missing acknowledge
+ * Tx Byte Request IT
+ * End of Transmission IT
+ * Tx Missing Acknowledge IT
+ * Tx-Error IT
+ * Tx-Buffer Underrun IT
+ * Tx arbitration lost */
+ __HAL_CEC_ENABLE_IT(hcec, CEC_IT_RXBR|CEC_IT_RXEND|CEC_IER_RX_ALL_ERR|CEC_IT_TXBR|CEC_IT_TXEND|CEC_IER_TX_ALL_ERR);
+
+ /* Enable the CEC Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ hcec->gState = HAL_CEC_STATE_READY;
+ hcec->RxState = HAL_CEC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the CEC peripheral
+ * @param hcec: CEC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec)
+{
+ /* Check the CEC handle allocation */
+ if(hcec == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+
+ hcec->gState = HAL_CEC_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_CEC_MspDeInit(hcec);
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ /* Clear Flags */
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXEND|CEC_FLAG_TXBR|CEC_FLAG_RXBR|CEC_FLAG_RXEND|CEC_ISR_ALL_ERROR);
+
+ /* Disable the following CEC Transmission/Reception interrupts as
+ * well as the following CEC Transmission/Reception Errors interrupts
+ * Rx Byte Received IT
+ * End of Reception IT
+ * Rx overrun
+ * Rx bit rising error
+ * Rx short bit period error
+ * Rx long bit period error
+ * Rx missing acknowledge
+ * Tx Byte Request IT
+ * End of Transmission IT
+ * Tx Missing Acknowledge IT
+ * Tx-Error IT
+ * Tx-Buffer Underrun IT
+ * Tx arbitration lost */
+ __HAL_CEC_DISABLE_IT(hcec, CEC_IT_RXBR|CEC_IT_RXEND|CEC_IER_RX_ALL_ERR|CEC_IT_TXBR|CEC_IT_TXEND|CEC_IER_TX_ALL_ERR);
+
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ hcec->gState = HAL_CEC_STATE_RESET;
+ hcec->RxState = HAL_CEC_STATE_RESET;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hcec);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the Own Address of the CEC device
+ * @param hcec: CEC handle
+ * @param CEC_OwnAddress: The CEC own address.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress)
+{
+ /* Check the parameters */
+ assert_param(IS_CEC_OWN_ADDRESS(CEC_OwnAddress));
+
+ if ((hcec->gState == HAL_CEC_STATE_READY) && (hcec->RxState == HAL_CEC_STATE_READY))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+
+ hcec->gState = HAL_CEC_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ if(CEC_OwnAddress != CEC_OWN_ADDRESS_NONE)
+ {
+ hcec->Instance->CFGR |= ((uint32_t)CEC_OwnAddress<<16);
+ }
+ else
+ {
+ hcec->Instance->CFGR &= ~(CEC_CFGR_OAR);
+ }
+
+ hcec->gState = HAL_CEC_STATE_READY;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+
+ /* Enable the Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief CEC MSP Init
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief CEC MSP DeInit
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions
+ * @brief CEC Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the CEC data transfers.
+
+ (#) The CEC handle must contain the initiator (TX side) and the destination (RX side)
+ logical addresses (4-bit long addresses, 0x0F for broadcast messages destination)
+
+ (#) The communication is performed using Interrupts.
+ These API's return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated CEC IRQ when using Interrupt mode.
+ The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks
+ will be executed respectivelly at the end of the transmit or Receive process
+ The HAL_CEC_ErrorCallback()user callback will be executed when a communication
+ error is detected
+
+ (#) API's with Interrupt are :
+ (+) HAL_CEC_Transmit_IT()
+ (+) HAL_CEC_IRQHandler()
+
+ (#) A set of User Callbacks are provided:
+ (+) HAL_CEC_TxCpltCallback()
+ (+) HAL_CEC_RxCpltCallback()
+ (+) HAL_CEC_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send data in interrupt mode
+ * @param hcec: CEC handle
+ * @param DestinationAddress: destination logical address
+ * @param pData: pointer to input byte data buffer
+ * @param Size: amount of data to be sent in bytes (without counting the header).
+ * 0 means only the header is sent (ping operation).
+ * Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size)
+{
+ /* if the IP isn't already busy and if there is no previous transmission
+ already pending due to arbitration lost */
+ if (hcec->gState == HAL_CEC_STATE_READY)
+ {
+ if((pData == NULL ) && (Size > 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_CEC_ADDRESS(DestinationAddress));
+ assert_param(IS_CEC_ADDRESS(InitiatorAddress));
+ assert_param(IS_CEC_MSGSIZE(Size));
+
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+ hcec->pTxBuffPtr = pData;
+ hcec->gState = HAL_CEC_STATE_BUSY_TX;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+
+ /* initialize the number of bytes to send,
+ * 0 means only one header is sent (ping operation) */
+ hcec->TxXferCount = Size;
+
+ /* in case of no payload (Size = 0), sender is only pinging the system;
+ Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
+ if (Size == 0U)
+ {
+ __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+ }
+
+ /* send header block */
+ hcec->Instance->TXDR = ((uint8_t)(InitiatorAddress << CEC_INITIATOR_LSB_POS) |(uint8_t) DestinationAddress);
+ /* Set TX Start of Message (TXSOM) bit */
+ __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+
+ return HAL_OK;
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Get size of the received frame.
+ * @param hcec: CEC handle
+ * @retval Frame size
+ */
+uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec)
+{
+ return hcec->RxXferSize;
+}
+
+/**
+ * @brief Change Rx Buffer.
+ * @param hcec: CEC handle
+ * @note This function can be called only inside the HAL_CEC_RxCpltCallback()
+ * @retval Frame size
+ */
+void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer)
+{
+ hcec->Init.RxBuffer = Rxbuffer;
+}
+
+/**
+ * @brief This function handles CEC interrupt requests.
+ * @param hcec: CEC handle
+ * @retval None
+ */
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec)
+{
+
+ /* save interrupts register for further error or interrupts handling purposes */
+ uint32_t reg = 0U;
+ reg = hcec->Instance->ISR;
+
+
+ /* ----------------------------Arbitration Lost Management----------------------------------*/
+ /* CEC TX arbitration error interrupt occurred --------------------------------------*/
+ if((reg & CEC_FLAG_ARBLST) != RESET)
+ {
+ hcec->ErrorCode = HAL_CEC_ERROR_ARBLST;
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST);
+ }
+
+ /* ----------------------------Rx Management----------------------------------*/
+ /* CEC RX byte received interrupt ---------------------------------------------------*/
+ if((reg & CEC_FLAG_RXBR) != RESET)
+ {
+ /* reception is starting */
+ hcec->RxState = HAL_CEC_STATE_BUSY_RX;
+ hcec->RxXferSize++;
+ /* read received byte */
+ *hcec->Init.RxBuffer++ = hcec->Instance->RXDR;
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR);
+ }
+
+ /* CEC RX end received interrupt ---------------------------------------------------*/
+ if((reg & CEC_FLAG_RXEND) != RESET)
+ {
+ /* clear IT */
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND);
+
+ /* Rx process is completed, restore hcec->RxState to Ready */
+ hcec->RxState = HAL_CEC_STATE_READY;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ hcec->Init.RxBuffer -= hcec->RxXferSize;
+ HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize);
+ hcec->RxXferSize = 0U;
+ }
+
+ /* ----------------------------Tx Management----------------------------------*/
+ /* CEC TX byte request interrupt ------------------------------------------------*/
+ if((reg & CEC_FLAG_TXBR) != RESET)
+ {
+ if (hcec->TxXferCount == 0U)
+ {
+ /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
+ __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+ hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+ }
+ else
+ {
+ hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+ hcec->TxXferCount--;
+ }
+ /* clear Tx-Byte request flag */
+ __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXBR);
+ }
+
+ /* CEC TX end interrupt ------------------------------------------------*/
+ if((reg & CEC_FLAG_TXEND) != RESET)
+ {
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND);
+
+ /* Tx process is ended, restore hcec->gState to Ready */
+ hcec->gState = HAL_CEC_STATE_READY;
+ /* Call the Process Unlocked before calling the Tx call back API to give the possibility to
+ start again the Transmission under the Tx call back API */
+ __HAL_UNLOCK(hcec);
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ HAL_CEC_TxCpltCallback(hcec);
+ }
+
+ /* ----------------------------Rx/Tx Error Management----------------------------------*/
+ if ((reg & (CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)) != 0U)
+ {
+ hcec->ErrorCode = reg;
+ __HAL_CEC_CLEAR_FLAG(hcec, HAL_CEC_ERROR_RXOVR|HAL_CEC_ERROR_BRE|CEC_FLAG_LBPE|CEC_FLAG_SBPE|HAL_CEC_ERROR_RXACKE|HAL_CEC_ERROR_TXUDR|HAL_CEC_ERROR_TXERR|HAL_CEC_ERROR_TXACKE);
+
+
+ if((reg & (CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE)) != RESET)
+ {
+ hcec->Init.RxBuffer-=hcec->RxXferSize;
+ hcec->RxXferSize = 0U;
+ hcec->RxState = HAL_CEC_STATE_READY;
+ }
+ else if (((reg & (CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)) != RESET) && ((reg & CEC_ISR_ARBLST) == RESET))
+ {
+ /* Set the CEC state ready to be able to start again the process */
+ hcec->gState = HAL_CEC_STATE_READY;
+ }
+
+ /* Error Call Back */
+ HAL_CEC_ErrorCallback(hcec);
+ }
+
+}
+
+/**
+ * @brief Tx Transfer completed callback
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback
+ * @param hcec: CEC handle
+ * @param RxFrameSize: Size of frame
+ * @retval None
+ */
+__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ UNUSED(RxFrameSize);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_RxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief CEC error callbacks
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_ErrorCallback can be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function
+ * @brief CEC control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control function #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CEC.
+ (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral.
+ (+) HAL_CEC_GetError() API can be helpful to check in run-time the error of the CEC peripheral.
+@endverbatim
+ * @{
+ */
+/**
+ * @brief return the CEC state
+ * @param hcec: pointer to a CEC_HandleTypeDef structure that contains
+ * the configuration information for the specified CEC module.
+ * @retval HAL state
+ */
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec)
+{
+ uint32_t temp1 = 0x00U, temp2 = 0x00U;
+ temp1 = hcec->gState;
+ temp2 = hcec->RxState;
+
+ return (HAL_CEC_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+ * @brief Return the CEC error code
+ * @param hcec : pointer to a CEC_HandleTypeDef structure that contains
+ * the configuration information for the specified CEC.
+ * @retval CEC Error Code
+ */
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec)
+{
+ return hcec->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F446xx */
+
+#endif /* HAL_CEC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,193 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ramfunc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FLASH RAMFUNC module driver.
+ * This file provides a FLASH firmware functions which should be
+ * executed from internal SRAM
+ * + Stop/Start the flash interface while System Run
+ * + Enable/Disable the flash sleep while System Run
+ @verbatim
+ ==============================================================================
+ ##### APIs executed from Internal RAM #####
+ ==============================================================================
+ [..]
+ *** ARM Compiler ***
+ --------------------
+ [..] RAM functions are defined using the toolchain options.
+ Functions that are be executed in RAM should reside in a separate
+ source module. Using the 'Options for File' dialog you can simply change
+ the 'Code / Const' area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the
+ Options for Target' dialog.
+
+ *** ICCARM Compiler ***
+ -----------------------
+ [..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
+
+ *** GNU Compiler ***
+ --------------------
+ [..] RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASH_RAMFUNC FLASH RAMFUNC
+ * @brief FLASH functions executed from RAM
+ * @{
+ */
+#ifdef HAL_FLASH_MODULE_ENABLED
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM
+ * @brief Peripheral Extended features functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### ramfunc functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions that should be executed from RAM
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Stop the flash interface while System Run
+ * @note This mode is only available for STM32F41xxx/STM32F446xx devices.
+ * @note This mode couldn't be set while executing with the flash itself.
+ * It should be done with specific routine executed from RAM.
+ * @retval None
+ */
+__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void)
+{
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Stop the flash interface while System Run */
+ SET_BIT(PWR->CR, PWR_CR_FISSR);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start the flash interface while System Run
+ * @note This mode is only available for STM32F411xx/STM32F446xx devices.
+ * @note This mode couldn't be set while executing with the flash itself.
+ * It should be done with specific routine executed from RAM.
+ * @retval None
+ */
+__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void)
+{
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Start the flash interface while System Run */
+ CLEAR_BIT(PWR->CR, PWR_CR_FISSR);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the flash sleep while System Run
+ * @note This mode is only available for STM32F41xxx/STM32F446xx devices.
+ * @note This mode could n't be set while executing with the flash itself.
+ * It should be done with specific routine executed from RAM.
+ * @retval None
+ */
+__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void)
+{
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Enable the flash sleep while System Run */
+ SET_BIT(PWR->CR, PWR_CR_FMSSR);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the flash sleep while System Run
+ * @note This mode is only available for STM32F41xxx/STM32F446xx devices.
+ * @note This mode couldn't be set while executing with the flash itself.
+ * It should be done with specific routine executed from RAM.
+ * @retval None
+ */
+__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void)
+{
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Disable the flash sleep while System Run */
+ CLEAR_BIT(PWR->CR, PWR_CR_FMSSR);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#endif /* HAL_FLASH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_flash_ramfunc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,97 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ramfunc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FLASH RAMFUNC driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_FLASH_RAMFUNC_H
+#define __STM32F4xx_FLASH_RAMFUNC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH_RAMFUNC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_RAMFUNC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
+ * @{
+ */
+__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void);
+__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,4790 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FMPI2C HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (FMPI2C) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The FMPI2C HAL driver can be used as follows:
+
+ (#) Declare a FMPI2C_HandleTypeDef handle structure, for example:
+ FMPI2C_HandleTypeDef hfmpi2c;
+
+ (#)Initialize the FMPI2C low level resources by implementing the HAL_FMPI2C_MspInit() API:
+ (##) Enable the FMPI2Cx interface clock
+ (##) FMPI2C pins configuration
+ (+++) Enable the clock for the FMPI2C GPIOs
+ (+++) Configure FMPI2C pins as alternate function open-drain
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the FMPI2Cx interrupt priority
+ (+++) Enable the NVIC FMPI2C IRQ Channel
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx channel
+ (+++) Associate the initialized DMA handle to the hfmpi2c DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+ the DMA Tx or Rx channel
+
+ (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode,
+ Own Address2, Own Address2 Mask, General call and Nostretch mode in the hfmpi2c Init structure.
+
+ (#) Initialize the FMPI2C registers by calling the HAL_FMPI2C_Init(), configures also the low level Hardware
+ (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_FMPI2C_MspInit(&hfmpi2c) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_FMPI2C_IsDeviceReady()
+
+ (#) For FMPI2C IO and IO MEM operations, three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Transmit in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Transmit()
+ (+) Receive in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Receive()
+ (+) Transmit in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Transmit()
+ (+) Receive in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Receive()
+
+ *** Polling mode IO MEM operation ***
+ =====================================
+ [..]
+ (+) Write an amount of data in blocking mode to a specific memory address using HAL_FMPI2C_Mem_Write()
+ (+) Read an amount of data in blocking mode from a specific memory address using HAL_FMPI2C_Mem_Read()
+
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Transmit_IT()
+ (+) At transmission end of transfer, HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Receive_IT()
+ (+) At reception end of transfer, HAL_FMPI2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Transmit_IT()
+ (+) At transmission end of transfer, HAL_FMPI2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Receive_IT()
+ (+) At reception end of transfer, HAL_FMPI2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+ (+) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT()
+ (+) End of abort process, HAL_FMPI2C_MasterRxCpltCallback() or HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback() or HAL_FMPI2C_MasterTxCpltCallback()
+ (+) Discard a slave FMPI2C process communication using __HAL_FMPI2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+
+ *** Interrupt mode IO sequential operation ***
+ ===================================
+ [..]
+ (@) These interfaces allow to manage a sequential transfer with a repeated start condition
+ when a direction change during transfer
+ [..]
+ (+) A specific option field manage the different steps of a sequential transfer
+ (+) Option field values are defined through FMPI2C_XFEROPTIONS and are listed below:
+ (++) FMPI2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode
+ (++) FMPI2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition
+ (++) FMPI2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and without a final stop condition in both cases
+ (++) FMPI2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and with a final stop condition in both cases
+
+ (+) Differents sequential FMPI2C interfaces are listed below:
+ (++) Sequential transmit in master FMPI2C mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback()
+ (++) Sequential receive in master FMPI2C mode an amount of data in non-blocking mode using HAL_FMPI2C_Master_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_FMPI2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback()
+ (++) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT()
+ (+++) End of abort process, HAL_FMPI2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_AbortCpltCallback()
+ (+++) mean HAL_FMPI2C_MasterTxCpltCallback() in case of previous state was master transmit
+ (+++) mean HAL_FMPI2C_MasterRxCpltCallback() in case of previous state was master receive
+ (++) Enable/disable the Address listen mode in slave FMPI2C mode using HAL_FMPI2C_EnableListen_IT() HAL_FMPI2C_DisableListen_IT()
+ (+++) When address slave FMPI2C match, HAL_FMPI2C_AddrCallback() is executed and user can
+ add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
+ (+++) At Listen mode end HAL_FMPI2C_ListenCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ListenCpltCallback()
+ (++) Sequential transmit in slave FMPI2C mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_FMPI2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback()
+ (++) Sequential receive in slave FMPI2C mode an amount of data in non-blocking mode using HAL_FMPI2C_Slave_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_FMPI2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback()
+ (++) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+ (++) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT()
+ (++) End of abort process, HAL_FMPI2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_AbortCpltCallback()
+ (++) Discard a slave FMPI2C process communication using __HAL_FMPI2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** Interrupt mode IO MEM operation ***
+ =======================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using
+ HAL_FMPI2C_Mem_Write_IT()
+ (+) At Memory end of write transfer, HAL_FMPI2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using
+ HAL_FMPI2C_Mem_Read_IT()
+ (+) At Memory end of read transfer, HAL_FMPI2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_FMPI2C_Master_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_FMPI2C_Master_Receive_DMA()
+ (+) At reception end of transfer, HAL_FMPI2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_FMPI2C_Slave_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_FMPI2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_FMPI2C_Slave_Receive_DMA()
+ (+) At reception end of transfer, HAL_FMPI2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+ (+) Abort a master FMPI2C process communication with Interrupt using HAL_FMPI2C_Master_Abort_IT()
+ (+) End of abort process, HAL_FMPI2C_MasterRxCpltCallback() or HAL_FMPI2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback() or HAL_FMPI2C_MasterTxCpltCallback()
+ (+) Discard a slave FMPI2C process communication using __HAL_FMPI2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** DMA mode IO MEM operation ***
+ =================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using
+ HAL_FMPI2C_Mem_Write_DMA()
+ (+) At Memory end of write transfer, HAL_FMPI2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using
+ HAL_FMPI2C_Mem_Read_DMA()
+ (+) At Memory end of read transfer, HAL_FMPI2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback()
+
+
+ *** FMPI2C HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in FMPI2C HAL driver.
+
+ (+) __HAL_FMPI2C_ENABLE: Enable the FMPI2C peripheral
+ (+) __HAL_FMPI2C_DISABLE: Disable the FMPI2C peripheral
+ (+) __HAL_FMPI2C_GENERATE_NACK: Generate a Non-Acknowledge FMPI2C peripheral in Slave mode
+ (+) __HAL_FMPI2C_GET_FLAG: Check whether the specified FMPI2C flag is set or not
+ (+) __HAL_FMPI2C_CLEAR_FLAG: Clear the specified FMPI2C pending flag
+ (+) __HAL_FMPI2C_ENABLE_IT: Enable the specified FMPI2C interrupt
+ (+) __HAL_FMPI2C_DISABLE_IT: Disable the specified FMPI2C interrupt
+
+ [..]
+ (@) You can refer to the FMPI2C HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FMPI2C FMPI2C
+ * @brief FMPI2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Private_Define FMPI2C Private Define
+ * @{
+ */
+#define TIMING_CLEAR_MASK ((uint32_t)0xF0FFFFFFU) /*!< FMPI2C TIMING clear register Mask */
+#define FMPI2C_TIMEOUT_ADDR ((uint32_t)10000U) /*!< 10 s */
+#define FMPI2C_TIMEOUT_BUSY ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_DIR ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_RXNE ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_STOPF ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_TC ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_TCR ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_TXIS ((uint32_t)25U) /*!< 25 ms */
+#define FMPI2C_TIMEOUT_FLAG ((uint32_t)25U) /*!< 25 ms */
+
+#define MAX_NBYTE_SIZE 255U
+#define SlaveAddr_SHIFT 7U
+#define SlaveAddr_MSK 0x06U
+
+/* Private define for @ref PreviousState usage */
+#define FMPI2C_STATE_MSK ((uint32_t)((HAL_FMPI2C_STATE_BUSY_TX | HAL_FMPI2C_STATE_BUSY_RX) & (~HAL_FMPI2C_STATE_READY))) /*!< Mask State define, keep only RX and TX bits */
+#define FMPI2C_STATE_NONE ((uint32_t)(HAL_FMPI2C_MODE_NONE)) /*!< Default Value */
+#define FMPI2C_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_TX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_RX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_TX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_RX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_MEM_BUSY_TX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_TX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */
+#define FMPI2C_STATE_MEM_BUSY_RX ((uint32_t)((HAL_FMPI2C_STATE_BUSY_RX & FMPI2C_STATE_MSK) | HAL_FMPI2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */
+
+
+/* Private define to centralize the enable/disable of Interrupts */
+#define FMPI2C_XFER_TX_IT ((uint32_t)0x00000001U)
+#define FMPI2C_XFER_RX_IT ((uint32_t)0x00000002U)
+#define FMPI2C_XFER_LISTEN_IT ((uint32_t)0x00000004U)
+
+#define FMPI2C_XFER_ERROR_IT ((uint32_t)0x00000011U)
+#define FMPI2C_XFER_CPLT_IT ((uint32_t)0x00000012U)
+#define FMPI2C_XFER_RELOAD_IT ((uint32_t)0x00000012U)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+#define FMPI2C_GET_DMA_REMAIN_DATA(__HANDLE__) ((((__HANDLE__)->State) == HAL_FMPI2C_STATE_BUSY_TX) ? \
+ ((uint32_t)((__HANDLE__)->hdmatx->Instance->NDTR)) : \
+ ((uint32_t)((__HANDLE__)->hdmarx->Instance->NDTR)))
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions
+ * @{
+ */
+/* Private functions to handle DMA transfer */
+static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAAbort(DMA_HandleTypeDef *hdma);
+
+/* Private functions to handle IT transfer */
+static void FMPI2C_ITAddrCplt (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+static void FMPI2C_ITMasterSequentialCplt (FMPI2C_HandleTypeDef *hfmpi2c);
+static void FMPI2C_ITSlaveSequentialCplt (FMPI2C_HandleTypeDef *hfmpi2c);
+static void FMPI2C_ITMasterCplt (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+static void FMPI2C_ITSlaveCplt (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+static void FMPI2C_ITListenCplt (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+static void FMPI2C_ITError (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags);
+
+/* Private functions to handle IT transfer */
+static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_RequestMemoryRead (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions for FMPI2C transfer IRQ handler */
+static HAL_StatusTypeDef FMPI2C_Master_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef FMPI2C_Slave_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef FMPI2C_Master_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef FMPI2C_Slave_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources);
+
+/* Private functions to handle flags during polling transfer */
+static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef FMPI2C_IsAcknowledgeFailed (FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions to centralize the enable/disable of Interrupts */
+static HAL_StatusTypeDef FMPI2C_Enable_IRQ (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest);
+static HAL_StatusTypeDef FMPI2C_Disable_IRQ (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest);
+
+/* Private functions to flush TXDR register */
+static void FMPI2C_Flush_TXDR (FMPI2C_HandleTypeDef *hfmpi2c);
+
+/* Private functions to handle start, restart or stop a transfer */
+static void FMPI2C_TransferConfig (FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Exported_Functions FMPI2C Exported Functions
+ * @{
+ */
+
+/** @defgroup FMPI2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ deinitialize the FMPI2Cx peripheral:
+
+ (+) User must Implement HAL_FMPI2C_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_FMPI2C_Init() to configure the selected device with
+ the selected configuration:
+ (++) Clock Timing
+ (++) Own Address 1
+ (++) Addressing mode (Master, Slave)
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) Own Address 2 Mask
+ (++) General call mode
+ (++) Nostretch mode
+
+ (+) Call the function HAL_FMPI2C_DeInit() to restore the default configuration
+ of the selected FMPI2Cx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FMPI2C according to the specified parameters
+ * in the FMPI2C_InitTypeDef and initialize the associated handle.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Check the FMPI2C handle allocation */
+ if(hfmpi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_FMPI2C_OWN_ADDRESS1(hfmpi2c->Init.OwnAddress1));
+ assert_param(IS_FMPI2C_ADDRESSING_MODE(hfmpi2c->Init.AddressingMode));
+ assert_param(IS_FMPI2C_DUAL_ADDRESS(hfmpi2c->Init.DualAddressMode));
+ assert_param(IS_FMPI2C_OWN_ADDRESS2(hfmpi2c->Init.OwnAddress2));
+ assert_param(IS_FMPI2C_OWN_ADDRESS2_MASK(hfmpi2c->Init.OwnAddress2Masks));
+ assert_param(IS_FMPI2C_GENERAL_CALL(hfmpi2c->Init.GeneralCallMode));
+ assert_param(IS_FMPI2C_NO_STRETCH(hfmpi2c->Init.NoStretchMode));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hfmpi2c->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_FMPI2C_MspInit(hfmpi2c);
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /*---------------------------- FMPI2Cx TIMINGR Configuration ------------------*/
+ /* Configure FMPI2Cx: Frequency range */
+ hfmpi2c->Instance->TIMINGR = hfmpi2c->Init.Timing & TIMING_CLEAR_MASK;
+
+ /*---------------------------- FMPI2Cx OAR1 Configuration ---------------------*/
+ /* Configure FMPI2Cx: Own Address1 and ack own address1 mode */
+ hfmpi2c->Instance->OAR1 &= ~FMPI2C_OAR1_OA1EN;
+ if(hfmpi2c->Init.OwnAddress1 != 0U)
+ {
+ if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_7BIT)
+ {
+ hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | hfmpi2c->Init.OwnAddress1);
+ }
+ else /* FMPI2C_ADDRESSINGMODE_10BIT */
+ {
+ hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | FMPI2C_OAR1_OA1MODE | hfmpi2c->Init.OwnAddress1);
+ }
+ }
+
+ /*---------------------------- FMPI2Cx CR2 Configuration ----------------------*/
+ /* Configure FMPI2Cx: Addressing Master mode */
+ if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
+ {
+ hfmpi2c->Instance->CR2 = (FMPI2C_CR2_ADD10);
+ }
+ /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+ hfmpi2c->Instance->CR2 |= (FMPI2C_CR2_AUTOEND | FMPI2C_CR2_NACK);
+
+ /*---------------------------- FMPI2Cx OAR2 Configuration ---------------------*/
+ /* Configure FMPI2Cx: Dual mode and Own Address2 */
+ hfmpi2c->Instance->OAR2 = (hfmpi2c->Init.DualAddressMode | hfmpi2c->Init.OwnAddress2 | (hfmpi2c->Init.OwnAddress2Masks << 8));
+
+ /*---------------------------- FMPI2Cx CR1 Configuration ----------------------*/
+ /* Configure FMPI2Cx: Generalcall and NoStretch mode */
+ hfmpi2c->Instance->CR1 = (hfmpi2c->Init.GeneralCallMode | hfmpi2c->Init.NoStretchMode);
+
+ /* Enable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the FMPI2C peripheral.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_DeInit(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Check the FMPI2C handle allocation */
+ if(hfmpi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the FMPI2C Peripheral Clock */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_FMPI2C_MspDeInit(hfmpi2c);
+
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+ hfmpi2c->State = HAL_FMPI2C_STATE_RESET;
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FMPI2C MSP.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the FMPI2C MSP.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the FMPI2C data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated FMPI2C IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_FMPI2C_Master_Transmit()
+ (++) HAL_FMPI2C_Master_Receive()
+ (++) HAL_FMPI2C_Slave_Transmit()
+ (++) HAL_FMPI2C_Slave_Receive()
+ (++) HAL_FMPI2C_Mem_Write()
+ (++) HAL_FMPI2C_Mem_Read()
+ (++) HAL_FMPI2C_IsDeviceReady()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_FMPI2C_Master_Transmit_IT()
+ (++) HAL_FMPI2C_Master_Receive_IT()
+ (++) HAL_FMPI2C_Slave_Transmit_IT()
+ (++) HAL_FMPI2C_Slave_Receive_IT()
+ (++) HAL_FMPI2C_Master_Sequential_Transmit_IT()
+ (++) HAL_FMPI2C_Master_Sequential_Receive_IT()
+ (++) HAL_FMPI2C_Slave_Sequential_Transmit_IT()
+ (++) HAL_FMPI2C_Slave_Sequential_Receive_IT()
+ (++) HAL_FMPI2C_Mem_Write_IT()
+ (++) HAL_FMPI2C_Mem_Read_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_FMPI2C_Master_Transmit_DMA()
+ (++) HAL_FMPI2C_Master_Receive_DMA()
+ (++) HAL_FMPI2C_Slave_Transmit_DMA()
+ (++) HAL_FMPI2C_Slave_Receive_DMA()
+ (++) HAL_FMPI2C_Mem_Write_DMA()
+ (++) HAL_FMPI2C_Mem_Read_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_FMPI2C_MemTxCpltCallback()
+ (++) HAL_FMPI2C_MemRxCpltCallback()
+ (++) HAL_FMPI2C_MasterTxCpltCallback()
+ (++) HAL_FMPI2C_MasterRxCpltCallback()
+ (++) HAL_FMPI2C_SlaveTxCpltCallback()
+ (++) HAL_FMPI2C_SlaveRxCpltCallback()
+ (++) HAL_FMPI2C_ErrorCallback()
+ (++) HAL_FMPI2C_AbortCpltCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits in master mode an amount of data in blocking mode.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_WRITE);
+ }
+
+ while(hfmpi2c->XferSize > 0)
+ {
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferCount--;
+ hfmpi2c->XferSize--;
+
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount!=0))
+ {
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives in master mode an amount of data in blocking mode.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+ }
+
+ while(hfmpi2c->XferSize > 0)
+ {
+ /* Wait until RXNE flag is set */
+ if(FMPI2C_WaitOnRXNEFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount != 0))
+ {
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmits in slave mode an amount of data in blocking mode.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+ /* If 10bit addressing mode is selected */
+ if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+ }
+
+ /* Wait until DIR flag is set Transmitter mode */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while(hfmpi2c->XferCount > 0)
+ {
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Normal use case for Transmitter mode */
+ /* A NACK is generated to confirm the end of transfer */
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in blocking mode
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+ /* Wait until DIR flag is reset Receiver mode */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while(hfmpi2c->XferCount > 0)
+ {
+ /* Wait until RXNE flag is set */
+ if(FMPI2C_WaitOnRXNEFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ /* Store Last receive data if any */
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET)
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferCount--;
+ }
+
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT | FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with DMA
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_WRITE);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with DMA
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ if(hfmpi2c->XferSize > 0)
+ {
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_DMA;
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMASlaveTransmitCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with DMA
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_DMA;
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMASlaveReceiveCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in blocking mode to a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+
+ do
+ {
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferCount--;
+ hfmpi2c->XferSize--;
+
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount!=0))
+ {
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+
+ }while(hfmpi2c->XferCount > 0);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in blocking mode from a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+ }
+
+ do
+ {
+ /* Wait until RXNE flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount != 0))
+ {
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+ }while(hfmpi2c->XferCount > 0);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0;
+ uint32_t xfermode = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_NO_STARTSTOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0;
+ uint32_t xfermode = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0;
+ uint32_t xfermode = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0;
+ uint32_t xfermode = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MEM;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_DMA;
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the FMPI2C DMA transfer complete callback */
+ hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hfmpi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hfmpi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
+
+ /* Set NBYTES to write and reload if hfmpi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress, hfmpi2c->XferSize, xfermode, FMPI2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Enable DMA Request */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_ERROR_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param Trials Number of trials
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ __IO uint32_t FMPI2C_Trials = 0;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ do
+ {
+ /* Generate Start */
+ hfmpi2c->Instance->CR2 = FMPI2C_GENERATE_START(hfmpi2c->Init.AddressingMode,DevAddress);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set or a NACK flag is set*/
+ tickstart = HAL_GetTick();
+ while((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET) && (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == RESET) && (hfmpi2c->State != HAL_FMPI2C_STATE_TIMEOUT))
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Device is ready */
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check if the NACKF flag has not been set */
+ if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == RESET)
+ {
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Device is ready */
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Clear STOP Flag, auto generated with autoend*/
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+ }
+
+ /* Check if the maximum allowed number of trials has been reached */
+ if (FMPI2C_Trials++ == Trials)
+ {
+ /* Generate Stop */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
+
+ /* Wait until STOPF flag is reset */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+ }
+ }while(FMPI2C_Trials < Trials);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in master FMPI2C mode an amount of data in non-blocking mode with Interrupt.
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0;
+ uint32_t xferrequest = FMPI2C_GENERATE_START_WRITE;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = XferOptions;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ /* If size > MAX_NBYTE_SIZE, use reload mode */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = hfmpi2c->XferOptions;
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if(hfmpi2c->PreviousState == FMPI2C_STATE_SLAVE_BUSY_TX)
+ {
+ xferrequest = FMPI2C_NO_STARTSTOP;
+ }
+ }
+
+
+ /* Send Slave Address and set NBYTES to write */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, hfmpi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in master FMPI2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0;
+ uint32_t xferrequest = FMPI2C_GENERATE_START_READ;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_MASTER;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferOptions = XferOptions;
+ hfmpi2c->XferISR = FMPI2C_Master_ISR_IT;
+
+ /* If hfmpi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = hfmpi2c->XferOptions;
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if(hfmpi2c->PreviousState == FMPI2C_STATE_MASTER_BUSY_RX)
+ {
+ xferrequest = FMPI2C_NO_STARTSTOP;
+ }
+ }
+
+ /* Send Slave Address and set NBYTES to read */
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress, hfmpi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in slave/device FMPI2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_TX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_TX_LISTEN;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = XferOptions;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ if(FMPI2C_GET_DIR(hfmpi2c) == FMPI2C_DIRECTION_RECEIVE)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT | FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Sequential receive in slave/device FMPI2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref FMPI2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY_RX_LISTEN;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_SLAVE;
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hfmpi2c->pBuffPtr = pData;
+ hfmpi2c->XferCount = Size;
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ hfmpi2c->XferOptions = XferOptions;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ if(FMPI2C_GET_DIR(hfmpi2c) == FMPI2C_DIRECTION_TRANSMIT)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Enable the Address listen mode with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_EnableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+
+ /* Enable the Address Match interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable the Address listen mode with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_DisableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Declaration of tmp to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+
+ /* Disable Address listen mode only if a transfer is not ongoing */
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN)
+ {
+ tmp = (uint32_t)(hfmpi2c->State) & FMPI2C_STATE_MSK;
+ hfmpi2c->PreviousState = tmp | (uint32_t)(hfmpi2c->Mode);
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+ hfmpi2c->XferISR = NULL;
+
+ /* Disable the Address Match interrupt */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Abort a master FMPI2C IT or DMA process communication with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Abort_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress)
+{
+ if(hfmpi2c->Mode == HAL_FMPI2C_MODE_MASTER)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ /* Set State at HAL_FMPI2C_STATE_ABORT */
+ hfmpi2c->State = HAL_FMPI2C_STATE_ABORT;
+
+ /* Set NBYTES to 1 to generate a dummy read on FMPI2C peripheral */
+ /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */
+ FMPI2C_TransferConfig(hfmpi2c, DevAddress, 1, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_STOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+ to avoid the risk of FMPI2C interrupt handle execution before current
+ process unlock */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wrong usage of abort function */
+ /* This function should be used only in case of abort monitored by master device */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+
+/**
+ * @brief This function handles FMPI2C event interrupt request.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Get current IT Flags and IT sources value */
+ uint32_t itflags = READ_REG(hfmpi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hfmpi2c->Instance->CR1);
+
+ /* FMPI2C events treatment -------------------------------------*/
+ if(hfmpi2c->XferISR != NULL)
+ {
+ hfmpi2c->XferISR(hfmpi2c, itflags, itsources);
+ }
+}
+
+/**
+ * @brief This function handles FMPI2C error interrupt request.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ uint32_t itflags = READ_REG(hfmpi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hfmpi2c->Instance->CR1);
+
+ /* FMPI2C Bus error interrupt occurred ------------------------------------*/
+ if(((itflags & FMPI2C_FLAG_BERR) != RESET) && ((itsources & FMPI2C_IT_ERRI) != RESET))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_BERR);
+ }
+
+ /* FMPI2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+ if(((itflags & FMPI2C_FLAG_OVR) != RESET) && ((itsources & FMPI2C_IT_ERRI) != RESET))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_OVR;
+
+ /* Clear OVR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_OVR);
+ }
+
+ /* FMPI2C Arbitration Loss error interrupt occurred -------------------------------------*/
+ if(((itflags & FMPI2C_FLAG_ARLO) != RESET) && ((itsources & FMPI2C_IT_ERRI) != RESET))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ARLO);
+ }
+
+ /* Call the Error Callback in case of Error detected */
+ if((hfmpi2c->ErrorCode & (HAL_FMPI2C_ERROR_BERR | HAL_FMPI2C_ERROR_OVR | HAL_FMPI2C_ERROR_ARLO)) != HAL_FMPI2C_ERROR_NONE)
+ {
+ FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MasterTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MasterRxCpltCallback could be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_SlaveTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_SlaveRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Address Match callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param TransferDirection: Master request Transfer Direction (Write/Read), value of @ref FMPI2C_XFEROPTIONS
+ * @param AddrMatchCode: Address Match Code
+ * @retval None
+ */
+__weak void HAL_FMPI2C_AddrCallback(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+ UNUSED(TransferDirection);
+ UNUSED(AddrMatchCode);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_AddrCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Listen Complete callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_ListenCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_ListenCpltCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Tx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MemTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Rx Transfer completed callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_MemRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FMPI2C error callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FMPI2C abort callback.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval None
+ */
+__weak void HAL_FMPI2C_AbortCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hfmpi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_FMPI2C_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @brief Peripheral State, Mode and Error functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State, Mode and Error functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the FMPI2C handle state.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @retval HAL state
+ */
+HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Return FMPI2C handle state */
+ return hfmpi2c->State;
+}
+
+/**
+ * @brief Returns the FMPI2C Master, Slave, Memory or no mode.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for FMPI2C module
+ * @retval HAL mode
+ */
+HAL_FMPI2C_ModeTypeDef HAL_FMPI2C_GetMode(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ return hfmpi2c->Mode;
+}
+
+/**
+* @brief Return the FMPI2C error code.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+* @retval FMPI2C Error Code
+*/
+uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ return hfmpi2c->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Master_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ if(((ITFlags & FMPI2C_FLAG_AF) != RESET) && ((ITSources & FMPI2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ /* No need to generate STOP, it is automatically done */
+ /* Error callback will be send during stop flag treatment */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+ }
+ else if(((ITFlags & FMPI2C_FLAG_RXNE) != RESET) && ((ITSources & FMPI2C_IT_RXI) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TXIS) != RESET) && ((ITSources & FMPI2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TCR) != RESET) && ((ITSources & FMPI2C_IT_TCI) != RESET))
+ {
+ if((hfmpi2c->XferSize == 0) && (hfmpi2c->XferCount != 0))
+ {
+ devaddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ FMPI2C_TransferConfig(hfmpi2c, devaddress, hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ if(hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME)
+ {
+ FMPI2C_TransferConfig(hfmpi2c, devaddress, hfmpi2c->XferSize, hfmpi2c->XferOptions, FMPI2C_NO_STARTSTOP);
+ }
+ else
+ {
+ FMPI2C_TransferConfig(hfmpi2c, devaddress, hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+ }
+ }
+ }
+ else
+ {
+ /* Call TxCpltCallback() if no stop mode is set */
+ if((FMPI2C_GET_STOP_MODE(hfmpi2c) != FMPI2C_AUTOEND_MODE)&&(hfmpi2c->Mode == HAL_FMPI2C_MODE_MASTER))
+ {
+ /* Call FMPI2C Master Sequential complete process */
+ FMPI2C_ITMasterSequentialCplt(hfmpi2c);
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE);
+ }
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TC) != RESET) && ((ITSources & FMPI2C_IT_TCI) != RESET))
+ {
+ if(hfmpi2c->XferCount == 0)
+ {
+ if((FMPI2C_GET_STOP_MODE(hfmpi2c) != FMPI2C_AUTOEND_MODE)&&(hfmpi2c->Mode == HAL_FMPI2C_MODE_MASTER))
+ {
+ /* Call FMPI2C Master Sequential complete process */
+ FMPI2C_ITMasterSequentialCplt(hfmpi2c);
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TC flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE);
+ }
+ }
+
+ if(((ITFlags & FMPI2C_FLAG_STOPF) != RESET) && ((ITSources & FMPI2C_IT_STOPI) != RESET))
+ {
+ /* Call FMPI2C Master complete process */
+ FMPI2C_ITMasterCplt(hfmpi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Slave_ISR_IT(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hfmpi2c);
+
+ if(((ITFlags & FMPI2C_FLAG_AF) != RESET) && ((ITSources & FMPI2C_IT_NACKI) != RESET))
+ {
+ /* Check that FMPI2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0*/
+ /* So clear Flag NACKF only */
+ if(hfmpi2c->XferCount == 0)
+ {
+ if(((hfmpi2c->XferOptions == FMPI2C_FIRST_AND_LAST_FRAME) || (hfmpi2c->XferOptions == FMPI2C_LAST_FRAME)) && \
+ (hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN))
+ {
+ /* Call FMPI2C Listen complete process */
+ FMPI2C_ITListenCplt(hfmpi2c, ITFlags);
+ }
+ else if((hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME) && (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN))
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+
+ /* Last Byte is Transmitted */
+ /* Call FMPI2C Slave Sequential complete process */
+ FMPI2C_ITSlaveSequentialCplt(hfmpi2c);
+ }
+ else
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+ }
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_RXNE) != RESET) && ((ITSources & FMPI2C_IT_RXI) != RESET))
+ {
+ if(hfmpi2c->XferCount > 0)
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+ }
+
+ if((hfmpi2c->XferCount == 0) && \
+ (hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME))
+ {
+ /* Call FMPI2C Slave Sequential complete process */
+ FMPI2C_ITSlaveSequentialCplt(hfmpi2c);
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_ADDR) != RESET) && ((ITSources & FMPI2C_IT_ADDRI) != RESET))
+ {
+ FMPI2C_ITAddrCplt(hfmpi2c, ITFlags);
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TXIS) != RESET) && ((ITSources & FMPI2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR only if XferCount not reach "0" */
+ /* A TXIS flag can be set, during STOP treatment */
+ /* Check if all Datas have already been sent */
+ /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
+ if(hfmpi2c->XferCount > 0)
+ {
+ /* Write data to TXDR */
+ hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+ hfmpi2c->XferCount--;
+ hfmpi2c->XferSize--;
+ }
+ else
+ {
+ if((hfmpi2c->XferOptions == FMPI2C_NEXT_FRAME) || (hfmpi2c->XferOptions == FMPI2C_FIRST_FRAME))
+ {
+ /* Last Byte is Transmitted */
+ /* Call FMPI2C Slave Sequential complete process */
+ FMPI2C_ITSlaveSequentialCplt(hfmpi2c);
+ }
+ }
+ }
+
+ /* Check if STOPF is set */
+ if(((ITFlags & FMPI2C_FLAG_STOPF) != RESET) && ((ITSources & FMPI2C_IT_STOPI) != RESET))
+ {
+ /* Call FMPI2C Slave complete process */
+ FMPI2C_ITSlaveCplt(hfmpi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Master_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0;
+ uint32_t xfermode = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ if(((ITFlags & FMPI2C_FLAG_AF) != RESET) && ((ITSources & FMPI2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+
+ /* No need to generate STOP, it is automatically done */
+ /* But enable STOP interrupt, to treat it */
+ /* Error callback will be send during stop flag treatment */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT);
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+ }
+ else if(((ITFlags & FMPI2C_FLAG_TCR) != RESET) && ((ITSources & FMPI2C_IT_TCI) != RESET))
+ {
+ /* Disable TC interrupt */
+ __HAL_FMPI2C_DISABLE_IT(hfmpi2c, FMPI2C_IT_TCI);
+
+ if(hfmpi2c->XferCount != 0)
+ {
+ /* Recover Slave address */
+ devaddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+ /* Prepare the new XferSize to transfer */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = FMPI2C_RELOAD_MODE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ xfermode = FMPI2C_AUTOEND_MODE;
+ }
+
+ /* Set the new XferSize in Nbytes register */
+ FMPI2C_TransferConfig(hfmpi2c, devaddress, hfmpi2c->XferSize, xfermode, FMPI2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hfmpi2c->XferCount -= hfmpi2c->XferSize;
+
+ /* Enable DMA Request */
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX)
+ {
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_SIZE);
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_STOPF) != RESET) && ((ITSources & FMPI2C_IT_STOPI) != RESET))
+ {
+ /* Call FMPI2C Master complete process */
+ FMPI2C_ITMasterCplt(hfmpi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Slave_ISR_DMA(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hfmpi2c);
+
+ if(((ITFlags & FMPI2C_FLAG_AF) != RESET) && ((ITSources & FMPI2C_IT_NACKI) != RESET))
+ {
+ /* Check that FMPI2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0 */
+ /* So clear Flag NACKF only */
+ if(FMPI2C_GET_DMA_REMAIN_DATA(hfmpi2c) == 0)
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+ }
+ else if(((ITFlags & FMPI2C_FLAG_ADDR) != RESET) && ((ITSources & FMPI2C_IT_ADDRI) != RESET))
+ {
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR);
+ }
+ else if(((ITFlags & FMPI2C_FLAG_STOPF) != RESET) && ((ITSources & FMPI2C_IT_STOPI) != RESET))
+ {
+ /* Call FMPI2C Slave complete process */
+ FMPI2C_ITSlaveCplt(hfmpi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for write request.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress,MemAddSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == FMPI2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TCR flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for read request.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_RequestMemoryRead(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ FMPI2C_TransferConfig(hfmpi2c,DevAddress,MemAddSize, FMPI2C_SOFTEND_MODE, FMPI2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == FMPI2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hfmpi2c->Instance->TXDR = FMPI2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TC flag is set */
+ if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief FMPI2C Address complete process callback.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void FMPI2C_ITAddrCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags)
+{
+ uint8_t transferdirection = 0;
+ uint16_t slaveaddrcode = 0;
+ uint16_t ownadd1code = 0;
+ uint16_t ownadd2code = 0;
+
+ /* In case of Listen state, need to inform upper layer of address match code event */
+ if((hfmpi2c->State & HAL_FMPI2C_STATE_LISTEN) == HAL_FMPI2C_STATE_LISTEN)
+ {
+ transferdirection = FMPI2C_GET_DIR(hfmpi2c);
+ slaveaddrcode = FMPI2C_GET_ADDR_MATCH(hfmpi2c);
+ ownadd1code = FMPI2C_GET_OWN_ADDRESS1(hfmpi2c);
+ ownadd2code = FMPI2C_GET_OWN_ADDRESS2(hfmpi2c);
+
+ /* If 10bits addressing mode is selected */
+ if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
+ {
+ if((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK))
+ {
+ slaveaddrcode = ownadd1code;
+ hfmpi2c->AddrEventCount++;
+ if(hfmpi2c->AddrEventCount == 2)
+ {
+ /* Reset Address Event counter */
+ hfmpi2c->AddrEventCount = 0;
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call Slave Addr callback */
+ HAL_FMPI2C_AddrCallback(hfmpi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ else
+ {
+ slaveaddrcode = ownadd2code;
+
+ /* Disable ADDR Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call Slave Addr callback */
+ HAL_FMPI2C_AddrCallback(hfmpi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* else 7 bits addressing mode is selected */
+ else
+ {
+ /* Disable ADDR Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call Slave Addr callback */
+ HAL_FMPI2C_AddrCallback(hfmpi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* Else clear address flag only */
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Master sequential complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @retval None
+ */
+static void FMPI2C_ITMasterSequentialCplt(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Reset FMPI2C handle mode */
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* No Generate Stop, to permit restart mode */
+ /* The stop will be done at the end of transfer, when FMPI2C_AUTOEND_MODE enable */
+ if (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_TX;
+ hfmpi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c);
+ }
+ /* hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX */
+ else
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->PreviousState = FMPI2C_STATE_MASTER_BUSY_RX;
+ hfmpi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Slave sequential complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @retval None
+ */
+static void FMPI2C_ITSlaveSequentialCplt(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Reset FMPI2C handle mode */
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Remove HAL_FMPI2C_STATE_SLAVE_BUSY_TX, keep only HAL_FMPI2C_STATE_LISTEN */
+ hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN;
+ hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_TX;
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Tx complete callback to inform upper layer of the end of transmit process */
+ HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c);
+ }
+
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Remove HAL_FMPI2C_STATE_SLAVE_BUSY_RX, keep only HAL_FMPI2C_STATE_LISTEN */
+ hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN;
+ hfmpi2c->PreviousState = FMPI2C_STATE_SLAVE_BUSY_RX;
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Rx complete callback to inform upper layer of the end of receive process */
+ HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Master complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void FMPI2C_ITMasterCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ /* Reset handle parameters */
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->XferISR = NULL;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+
+ if((ITFlags & FMPI2C_FLAG_AF) != RESET)
+ {
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Set acknowledge error code */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+
+ /* Disable Interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_TX_IT| FMPI2C_XFER_RX_IT);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ if((hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE) || (hfmpi2c->State == HAL_FMPI2C_STATE_ABORT))
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode);
+ }
+ /* hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX */
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ if (hfmpi2c->Mode == HAL_FMPI2C_MODE_MEM)
+ {
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_MemTxCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c);
+ }
+ }
+ /* hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX */
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ if (hfmpi2c->Mode == HAL_FMPI2C_MODE_MEM)
+ {
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ HAL_FMPI2C_MemRxCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c);
+ }
+ }
+}
+
+/**
+ * @brief FMPI2C Slave complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void FMPI2C_ITSlaveCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear ADDR flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+ /* Disable all interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_TX_IT | FMPI2C_XFER_RX_IT);
+
+ /* Disable Address Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+
+ /* If a DMA is ongoing, Update handle size context */
+ if(((hfmpi2c->Instance->CR1 & FMPI2C_CR1_TXDMAEN) == FMPI2C_CR1_TXDMAEN) ||
+ ((hfmpi2c->Instance->CR1 & FMPI2C_CR1_RXDMAEN) == FMPI2C_CR1_RXDMAEN))
+ {
+ hfmpi2c->XferCount = FMPI2C_GET_DMA_REMAIN_DATA(hfmpi2c);
+ }
+
+ /* All data are not transferred, so set error code accordingly */
+ if(hfmpi2c->XferCount != 0)
+ {
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+
+ /* Store Last receive data if any */
+ if(((ITFlags & FMPI2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+
+ if((hfmpi2c->XferSize > 0))
+ {
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+ }
+
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+ hfmpi2c->XferISR = NULL;
+
+ if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, hfmpi2c->ErrorCode);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN)
+ {
+ /* Call FMPI2C Listen complete process */
+ FMPI2C_ITListenCplt(hfmpi2c, ITFlags);
+ }
+ }
+ else if(hfmpi2c->XferOptions != FMPI2C_NO_OPTION_FRAME)
+ {
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_FMPI2C_ListenCpltCallback(hfmpi2c);
+ }
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Slave Rx Complete callback */
+ HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Slave Tx Complete callback */
+ HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Listen complete process.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void FMPI2C_ITListenCplt(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags)
+{
+ /* Reset handle parameters */
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+ hfmpi2c->XferISR = NULL;
+
+ /* Store Last receive data if any */
+ if(((ITFlags & FMPI2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+
+ if((hfmpi2c->XferSize > 0))
+ {
+ hfmpi2c->XferSize--;
+ hfmpi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+ }
+ }
+
+ /* Disable all Interrupts*/
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT | FMPI2C_XFER_TX_IT);
+
+ /* Clear NACK Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_FMPI2C_ListenCpltCallback(hfmpi2c);
+}
+
+/**
+ * @brief FMPI2C interrupts error process.
+ * @param hfmpi2c FMPI2C handle.
+ * @param ErrorCode Error code to handle.
+ * @retval None
+ */
+static void FMPI2C_ITError(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ErrorCode)
+{
+ /* Reset handle parameters */
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+ hfmpi2c->XferOptions = FMPI2C_NO_OPTION_FRAME;
+ hfmpi2c->XferCount = 0;
+
+ /* Set new error code */
+ hfmpi2c->ErrorCode |= ErrorCode;
+
+ /* Disable Interrupts */
+ if((hfmpi2c->State == HAL_FMPI2C_STATE_LISTEN) ||
+ (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_TX_LISTEN) ||
+ (hfmpi2c->State == HAL_FMPI2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* Disable all interrupts, except interrupts related to LISTEN state */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_RX_IT | FMPI2C_XFER_TX_IT);
+
+ /* keep HAL_FMPI2C_STATE_LISTEN if set */
+ hfmpi2c->State = HAL_FMPI2C_STATE_LISTEN;
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->XferISR = FMPI2C_Slave_ISR_IT;
+ }
+ else
+ {
+ /* Disable all interrupts */
+ FMPI2C_Disable_IRQ(hfmpi2c, FMPI2C_XFER_LISTEN_IT | FMPI2C_XFER_RX_IT | FMPI2C_XFER_TX_IT);
+
+ /* If state is an abort treatment on goind, don't change state */
+ /* This change will be do later */
+ if(hfmpi2c->State != HAL_FMPI2C_STATE_ABORT)
+ {
+ /* Set HAL_FMPI2C_STATE_READY */
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+ }
+ hfmpi2c->PreviousState = FMPI2C_STATE_NONE;
+ hfmpi2c->XferISR = NULL;
+ }
+
+ /* Abort DMA TX transfer if any */
+ if((hfmpi2c->Instance->CR1 & FMPI2C_CR1_TXDMAEN) == FMPI2C_CR1_TXDMAEN)
+ {
+ hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
+
+ /* Set the FMPI2C DMA Abort callback :
+ will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */
+ hfmpi2c->hdmatx->XferAbortCallback = FMPI2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ if(HAL_DMA_Abort_IT(hfmpi2c->hdmatx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hfmpi2c->hdmatx->XferAbortCallback(hfmpi2c->hdmatx);
+ }
+ }
+ /* Abort DMA RX transfer if any */
+ else if((hfmpi2c->Instance->CR1 & FMPI2C_CR1_RXDMAEN) == FMPI2C_CR1_RXDMAEN)
+ {
+ hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
+
+ /* Set the FMPI2C DMA Abort callback :
+ will lead to call HAL_FMPI2C_ErrorCallback() at end of DMA abort procedure */
+ hfmpi2c->hdmarx->XferAbortCallback = FMPI2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ if(HAL_DMA_Abort_IT(hfmpi2c->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hfmpi2c->hdmarx->XferAbortCallback(hfmpi2c->hdmarx);
+ }
+ }
+ else if(hfmpi2c->State == HAL_FMPI2C_STATE_ABORT)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_AbortCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_ErrorCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief FMPI2C Tx data register flush process.
+ * @param hfmpi2c FMPI2C handle.
+ * @retval None
+ */
+static void FMPI2C_Flush_TXDR(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* If a pending TXIS flag is set */
+ /* Write a dummy data in TXDR to clear it */
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) != RESET)
+ {
+ hfmpi2c->Instance->TXDR = 0x00;
+ }
+
+ /* Flush TX register if not empty */
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXE) == RESET)
+ {
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_TXE);
+ }
+}
+
+/**
+ * @brief DMA FMPI2C master transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if(hfmpi2c->XferCount == 0)
+ {
+ /* Enable STOP interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ }
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)hfmpi2c->pBuffPtr, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+ /* Enable TC interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA FMPI2C slave transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA FMPI2C master receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if(hfmpi2c->XferCount == 0)
+ {
+ /* Enable STOP interrupt */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if(hfmpi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hfmpi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hfmpi2c->XferSize = hfmpi2c->XferCount;
+ }
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)hfmpi2c->pBuffPtr, hfmpi2c->XferSize);
+
+ /* Enable TC interrupts */
+ FMPI2C_Enable_IRQ(hfmpi2c, FMPI2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA FMPI2C slave receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA FMPI2C communication error callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+ FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ FMPI2C_ITError(hfmpi2c, HAL_FMPI2C_ERROR_DMA);
+}
+
+/**
+ * @brief DMA FMPI2C communication abort callback
+ * (To be called at end of DMA Abort procedure).
+ * @param hdma: DMA handle.
+ * @retval None
+ */
+static void FMPI2C_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+ /* Reset AbortCpltCallback */
+ hfmpi2c->hdmatx->XferAbortCallback = NULL;
+ hfmpi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Check if come from abort from user */
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_ABORT)
+ {
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_AbortCpltCallback(hfmpi2c);
+ }
+ else
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_FMPI2C_ErrorCallback(hfmpi2c);
+ }
+}
+
+/**
+ * @brief This function handles FMPI2C Communication Timeout.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Flag Specifies the FMPI2C flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, Flag) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles FMPI2C Communication Timeout for specific usage of TXIS flag.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles FMPI2C Communication Timeout for specific usage of STOP flag.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles FMPI2C Communication Timeout for specific usage of RXNE flag.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check if a STOPF is detected */
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
+ {
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Acknowledge failed detection during an FMPI2C Communication.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_IsAcknowledgeFailed(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)
+ {
+ /* Wait until STOP Flag is reset */
+ /* AutoEnd should be initiate after AF */
+ while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear NACKF Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+ /* Clear STOP Flag */
+ __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+ /* Flush TX register */
+ FMPI2C_Flush_TXDR(hfmpi2c);
+
+ /* Clear Configuration Register 2 */
+ FMPI2C_RESET_CR2(hfmpi2c);
+
+ hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_AF;
+ hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+ hfmpi2c->Mode = HAL_FMPI2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles FMPI2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+ * @param hfmpi2c FMPI2C handle.
+ * @param DevAddress Specifies the slave address to be programmed.
+ * @param Size Specifies the number of bytes to be programmed.
+ * This parameter must be a value between 0 and 255.
+ * @param Mode New state of the FMPI2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_RELOAD_MODE Enable Reload mode .
+ * @arg @ref FMPI2C_AUTOEND_MODE Enable Automatic end mode.
+ * @arg @ref FMPI2C_SOFTEND_MODE Enable Software end mode.
+ * @param Request New state of the FMPI2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_NO_STARTSTOP Don't Generate stop and start condition.
+ * @arg @ref FMPI2C_GENERATE_STOP Generate stop condition (Size should be set to 0).
+ * @arg @ref FMPI2C_GENERATE_START_READ Generate Restart for read request.
+ * @arg @ref FMPI2C_GENERATE_START_WRITE Generate Restart for write request.
+ * @retval None
+ */
+static void FMPI2C_TransferConfig(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_TRANSFER_MODE(Mode));
+ assert_param(IS_TRANSFER_REQUEST(Request));
+
+ /* Get the CR2 register value */
+ tmpreg = hfmpi2c->Instance->CR2;
+
+ /* clear tmpreg specific bits */
+ tmpreg &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_AUTOEND | FMPI2C_CR2_RD_WRN | FMPI2C_CR2_START | FMPI2C_CR2_STOP));
+
+ /* update tmpreg */
+ tmpreg |= (uint32_t)(((uint32_t)DevAddress & FMPI2C_CR2_SADD) | (((uint32_t)Size << 16 ) & FMPI2C_CR2_NBYTES) | \
+ (uint32_t)Mode | (uint32_t)Request);
+
+ /* update CR2 register */
+ hfmpi2c->Instance->CR2 = tmpreg;
+}
+
+/**
+ * @brief Manage the enabling of Interrupts.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param InterruptRequest Value of @ref FMPI2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Enable_IRQ(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0;
+
+ if((hfmpi2c->XferISR == FMPI2C_Master_ISR_DMA) || \
+ (hfmpi2c->XferISR == FMPI2C_Slave_ISR_DMA))
+ {
+ if((InterruptRequest & FMPI2C_XFER_LISTEN_IT) == FMPI2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK and ADDR interrupts */
+ tmpisr |= FMPI2C_IT_ADDRI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_ERROR_IT) == FMPI2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_NACKI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_CPLT_IT) == FMPI2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_RELOAD_IT) == FMPI2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= FMPI2C_IT_TCI;
+ }
+ }
+ else
+ {
+ if((InterruptRequest & FMPI2C_XFER_LISTEN_IT) == FMPI2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK, and ADDR interrupts */
+ tmpisr |= FMPI2C_IT_ADDRI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_TX_IT) == FMPI2C_XFER_TX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+ tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_TXI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_RX_IT) == FMPI2C_XFER_RX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and TXI interrupts */
+ tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_RXI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_CPLT_IT) == FMPI2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI;
+ }
+ }
+
+ /* Enable interrupts only at the end */
+ /* to avoid the risk of FMPI2C interrupt handle execution before */
+ /* all interrupts requested done */
+ __HAL_FMPI2C_ENABLE_IT(hfmpi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Manage the disabling of Interrupts.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2C.
+ * @param InterruptRequest Value of @ref FMPI2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FMPI2C_Disable_IRQ(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0;
+
+ if((InterruptRequest & FMPI2C_XFER_TX_IT) == FMPI2C_XFER_TX_IT)
+ {
+ /* Disable TC and TXI interrupts */
+ tmpisr |= FMPI2C_IT_TCI | FMPI2C_IT_TXI;
+
+ if((hfmpi2c->State & HAL_FMPI2C_STATE_LISTEN) != HAL_FMPI2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_RX_IT) == FMPI2C_XFER_RX_IT)
+ {
+ /* Disable TC and RXI interrupts */
+ tmpisr |= FMPI2C_IT_TCI | FMPI2C_IT_RXI;
+
+ if((hfmpi2c->State & HAL_FMPI2C_STATE_LISTEN) != HAL_FMPI2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_LISTEN_IT) == FMPI2C_XFER_LISTEN_IT)
+ {
+ /* Disable ADDR, NACK and STOP interrupts */
+ tmpisr |= FMPI2C_IT_ADDRI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ERRI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_ERROR_IT) == FMPI2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= FMPI2C_IT_ERRI | FMPI2C_IT_NACKI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_CPLT_IT) == FMPI2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= FMPI2C_IT_STOPI;
+ }
+
+ if((InterruptRequest & FMPI2C_XFER_RELOAD_IT) == FMPI2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= FMPI2C_IT_TCI;
+ }
+
+ /* Disable interrupts only at the end */
+ /* to avoid a breaking situation like at "t" time */
+ /* all disable interrupts request are not done */
+ __HAL_FMPI2C_DISABLE_IT(hfmpi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,719 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FMPI2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FMPI2C_H
+#define __STM32F4xx_HAL_FMPI2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMPI2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Exported_Types FMPI2C Exported Types
+ * @{
+ */
+
+/** @defgroup FMPI2C_Configuration_Structure_definition FMPI2C Configuration Structure definition
+ * @brief FMPI2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the FMPI2C_TIMINGR_register value.
+ This parameter calculated by referring to FMPI2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref FMPI2C_ADDRESSING_MODE */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref FMPI2C_DUAL_ADDRESSING_MODE */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref FMPI2C_OWN_ADDRESS2_MASKS */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref FMPI2C_GENERAL_CALL_ADDRESSING_MODE */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref FMPI2C_NOSTRETCH_MODE */
+
+}FMPI2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @note HAL FMPI2C State value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : Abort (Abort user request on going)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized and ready to use. HAL FMPI2C Init function called)
+ * b4 (not used)
+ * x : Should be set to 0
+ * b3
+ * 0 : Ready or Busy (No Listen mode ongoing)
+ * 1 : Listen (IP in Address Listen Mode)
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * @{
+ */
+typedef enum
+{
+ HAL_FMPI2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_FMPI2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
+ HAL_FMPI2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
+ HAL_FMPI2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
+ HAL_FMPI2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_FMPI2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
+ HAL_FMPI2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
+ process is ongoing */
+ HAL_FMPI2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
+ process is ongoing */
+ HAL_FMPI2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
+ HAL_FMPI2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
+ HAL_FMPI2C_STATE_ERROR = 0xE0U /*!< Error */
+
+}HAL_FMPI2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+ * @brief HAL Mode structure definition
+ * @note HAL FMPI2C Mode value coding follow below described bitmap :
+ * b7 (not used)
+ * x : Should be set to 0
+ * b6
+ * 0 : None
+ * 1 : Memory (HAL FMPI2C communication is in Memory Mode)
+ * b5
+ * 0 : None
+ * 1 : Slave (HAL FMPI2C communication is in Slave Mode)
+ * b4
+ * 0 : None
+ * 1 : Master (HAL FMPI2C communication is in Master Mode)
+ * b3-b2-b1-b0 (not used)
+ * xxxx : Should be set to 0000
+ * @{
+ */
+typedef enum
+{
+ HAL_FMPI2C_MODE_NONE = 0x00U, /*!< No FMPI2C communication on going */
+ HAL_FMPI2C_MODE_MASTER = 0x10U, /*!< FMPI2C communication is in Master Mode */
+ HAL_FMPI2C_MODE_SLAVE = 0x20U, /*!< FMPI2C communication is in Slave Mode */
+ HAL_FMPI2C_MODE_MEM = 0x40U /*!< FMPI2C communication is in Memory Mode */
+
+}HAL_FMPI2C_ModeTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Error_Code_definition FMPI2C Error Code definition
+ * @brief FMPI2C Error Code definition
+ * @{
+ */
+#define HAL_FMPI2C_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_FMPI2C_ERROR_BERR ((uint32_t)0x00000001U) /*!< BERR error */
+#define HAL_FMPI2C_ERROR_ARLO ((uint32_t)0x00000002U) /*!< ARLO error */
+#define HAL_FMPI2C_ERROR_AF ((uint32_t)0x00000004U) /*!< ACKF error */
+#define HAL_FMPI2C_ERROR_OVR ((uint32_t)0x00000008U) /*!< OVR error */
+#define HAL_FMPI2C_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_FMPI2C_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout error */
+#define HAL_FMPI2C_ERROR_SIZE ((uint32_t)0x00000040U) /*!< Size Management error */
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_handle_Structure_definition FMPI2C handle Structure definition
+ * @brief FMPI2C handle Structure definition
+ * @{
+ */
+typedef struct __FMPI2C_HandleTypeDef
+{
+ FMPI2C_TypeDef *Instance; /*!< FMPI2C registers base address */
+
+ FMPI2C_InitTypeDef Init; /*!< FMPI2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to FMPI2C transfer buffer */
+
+ uint16_t XferSize; /*!< FMPI2C transfer size */
+
+ __IO uint16_t XferCount; /*!< FMPI2C transfer counter */
+
+ __IO uint32_t XferOptions; /*!< FMPI2C sequantial transfer options, this parameter can
+ be a value of @ref FMPI2C_XFEROPTIONS */
+
+ __IO uint32_t PreviousState; /*!< FMPI2C communication Previous state */
+
+ HAL_StatusTypeDef (*XferISR)(struct __FMPI2C_HandleTypeDef *hfmpi2c, uint32_t ITFlags, uint32_t ITSources); /*!< FMPI2C transfer IRQ handler function pointer */
+
+ DMA_HandleTypeDef *hdmatx; /*!< FMPI2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< FMPI2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< FMPI2C locking object */
+
+ __IO HAL_FMPI2C_StateTypeDef State; /*!< FMPI2C communication state */
+
+ __IO HAL_FMPI2C_ModeTypeDef Mode; /*!< FMPI2C communication mode */
+
+ __IO uint32_t ErrorCode; /*!< FMPI2C Error code */
+
+ __IO uint32_t AddrEventCount; /*!< FMPI2C Address Event counter */
+}FMPI2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Exported_Constants FMPI2C Exported Constants
+ * @{
+ */
+
+/** @defgroup FMPI2C_XFEROPTIONS FMPI2C Sequential Transfer Options
+ * @{
+ */
+#define FMPI2C_NO_OPTION_FRAME ((uint32_t)0xFFFF0000U)
+#define FMPI2C_FIRST_FRAME ((uint32_t)FMPI2C_SOFTEND_MODE)
+#define FMPI2C_NEXT_FRAME ((uint32_t)(FMPI2C_RELOAD_MODE | FMPI2C_SOFTEND_MODE))
+#define FMPI2C_FIRST_AND_LAST_FRAME ((uint32_t)FMPI2C_AUTOEND_MODE)
+#define FMPI2C_LAST_FRAME ((uint32_t)FMPI2C_AUTOEND_MODE)
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_ADDRESSING_MODE FMPI2C Addressing Mode
+ * @{
+ */
+#define FMPI2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001U)
+#define FMPI2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_DUAL_ADDRESSING_MODE FMPI2C Dual Addressing Mode
+ * @{
+ */
+#define FMPI2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000U)
+#define FMPI2C_DUALADDRESS_ENABLE FMPI2C_OAR2_OA2EN
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_OWN_ADDRESS2_MASKS FMPI2C Own Address2 Masks
+ * @{
+ */
+
+#define FMPI2C_OA2_NOMASK ((uint8_t)0x00U)
+#define FMPI2C_OA2_MASK01 ((uint8_t)0x01U)
+#define FMPI2C_OA2_MASK02 ((uint8_t)0x02U)
+#define FMPI2C_OA2_MASK03 ((uint8_t)0x03U)
+#define FMPI2C_OA2_MASK04 ((uint8_t)0x04U)
+#define FMPI2C_OA2_MASK05 ((uint8_t)0x05U)
+#define FMPI2C_OA2_MASK06 ((uint8_t)0x06U)
+#define FMPI2C_OA2_MASK07 ((uint8_t)0x07U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_GENERAL_CALL_ADDRESSING_MODE FMPI2C General Call Addressing Mode
+ * @{
+ */
+#define FMPI2C_GENERALCALL_DISABLE ((uint32_t)0x00000000U)
+#define FMPI2C_GENERALCALL_ENABLE FMPI2C_CR1_GCEN
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_NOSTRETCH_MODE FMPI2C No-Stretch Mode
+ * @{
+ */
+#define FMPI2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000U)
+#define FMPI2C_NOSTRETCH_ENABLE FMPI2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_MEMORY_ADDRESS_SIZE FMPI2C Memory Address Size
+ * @{
+ */
+#define FMPI2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001U)
+#define FMPI2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_XferDirection FMPI2C Transfer Direction
+ * @{
+ */
+#define FMPI2C_DIRECTION_RECEIVE ((uint32_t)0x00000000U)
+#define FMPI2C_DIRECTION_TRANSMIT ((uint32_t)0x00000001U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_RELOAD_END_MODE FMPI2C Reload End Mode
+ * @{
+ */
+#define FMPI2C_RELOAD_MODE FMPI2C_CR2_RELOAD
+#define FMPI2C_AUTOEND_MODE FMPI2C_CR2_AUTOEND
+#define FMPI2C_SOFTEND_MODE ((uint32_t)0x00000000U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_START_STOP_MODE FMPI2C Start or Stop Mode
+ * @{
+ */
+
+#define FMPI2C_NO_STARTSTOP ((uint32_t)0x00000000U)
+#define FMPI2C_GENERATE_STOP FMPI2C_CR2_STOP
+#define FMPI2C_GENERATE_START_READ (uint32_t)(FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN)
+#define FMPI2C_GENERATE_START_WRITE FMPI2C_CR2_START
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Interrupt_configuration_definition FMPI2C Interrupt configuration definition
+ * @brief FMPI2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define FMPI2C_IT_ERRI FMPI2C_CR1_ERRIE
+#define FMPI2C_IT_TCI FMPI2C_CR1_TCIE
+#define FMPI2C_IT_STOPI FMPI2C_CR1_STOPIE
+#define FMPI2C_IT_NACKI FMPI2C_CR1_NACKIE
+#define FMPI2C_IT_ADDRI FMPI2C_CR1_ADDRIE
+#define FMPI2C_IT_RXI FMPI2C_CR1_RXIE
+#define FMPI2C_IT_TXI FMPI2C_CR1_TXIE
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Flag_definition FMPI2C Flag definition
+ * @{
+ */
+#define FMPI2C_FLAG_TXE FMPI2C_ISR_TXE
+#define FMPI2C_FLAG_TXIS FMPI2C_ISR_TXIS
+#define FMPI2C_FLAG_RXNE FMPI2C_ISR_RXNE
+#define FMPI2C_FLAG_ADDR FMPI2C_ISR_ADDR
+#define FMPI2C_FLAG_AF FMPI2C_ISR_NACKF
+#define FMPI2C_FLAG_STOPF FMPI2C_ISR_STOPF
+#define FMPI2C_FLAG_TC FMPI2C_ISR_TC
+#define FMPI2C_FLAG_TCR FMPI2C_ISR_TCR
+#define FMPI2C_FLAG_BERR FMPI2C_ISR_BERR
+#define FMPI2C_FLAG_ARLO FMPI2C_ISR_ARLO
+#define FMPI2C_FLAG_OVR FMPI2C_ISR_OVR
+#define FMPI2C_FLAG_PECERR FMPI2C_ISR_PECERR
+#define FMPI2C_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT
+#define FMPI2C_FLAG_ALERT FMPI2C_ISR_ALERT
+#define FMPI2C_FLAG_BUSY FMPI2C_ISR_BUSY
+#define FMPI2C_FLAG_DIR FMPI2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Exported_Macros FMPI2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset FMPI2C handle state.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @retval None
+ */
+#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPI2C_STATE_RESET)
+
+/** @brief Enable the specified FMPI2C interrupt.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_IT_ERRI Errors interrupt enable
+ * @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref FMPI2C_IT_RXI RX interrupt enable
+ * @arg @ref FMPI2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_FMPI2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief Disable the specified FMPI2C interrupt.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_IT_ERRI Errors interrupt enable
+ * @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref FMPI2C_IT_RXI RX interrupt enable
+ * @arg @ref FMPI2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_FMPI2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified FMPI2C interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __INTERRUPT__ specifies the FMPI2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_IT_ERRI Errors interrupt enable
+ * @arg @ref FMPI2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref FMPI2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref FMPI2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref FMPI2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref FMPI2C_IT_RXI RX interrupt enable
+ * @arg @ref FMPI2C_IT_TXI TX interrupt enable
+ *
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_FMPI2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified FMPI2C flag is set or not.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref FMPI2C_FLAG_TXE Transmit data register empty
+ * @arg @ref FMPI2C_FLAG_TXIS Transmit interrupt status
+ * @arg @ref FMPI2C_FLAG_RXNE Receive data register not empty
+ * @arg @ref FMPI2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref FMPI2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref FMPI2C_FLAG_STOPF STOP detection flag
+ * @arg @ref FMPI2C_FLAG_TC Transfer complete (master mode)
+ * @arg @ref FMPI2C_FLAG_TCR Transfer complete reload
+ * @arg @ref FMPI2C_FLAG_BERR Bus error
+ * @arg @ref FMPI2C_FLAG_ARLO Arbitration lost
+ * @arg @ref FMPI2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref FMPI2C_FLAG_PECERR PEC error in reception
+ * @arg @ref FMPI2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref FMPI2C_FLAG_ALERT SMBus alert
+ * @arg @ref FMPI2C_FLAG_BUSY Bus busy
+ * @arg @ref FMPI2C_FLAG_DIR Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FMPI2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/** @brief Clear the FMPI2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref FMPI2C_FLAG_TXE Transmit data register empty
+ * @arg @ref FMPI2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref FMPI2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref FMPI2C_FLAG_STOPF STOP detection flag
+ * @arg @ref FMPI2C_FLAG_BERR Bus error
+ * @arg @ref FMPI2C_FLAG_ARLO Arbitration lost
+ * @arg @ref FMPI2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref FMPI2C_FLAG_PECERR PEC error in reception
+ * @arg @ref FMPI2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref FMPI2C_FLAG_ALERT SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_FMPI2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == FMPI2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
+ : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+
+/** @brief Enable the specified FMPI2C peripheral.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @retval None
+ */
+#define __HAL_FMPI2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE))
+
+/** @brief Disable the specified FMPI2C peripheral.
+ * @param __HANDLE__ specifies the FMPI2C Handle.
+ * @retval None
+ */
+#define __HAL_FMPI2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, FMPI2C_CR1_PE))
+
+/** @brief Generate a Non-Acknowledge FMPI2C peripheral in Slave mode.
+ * @param __HANDLE__: specifies the FMPI2C Handle.
+ * @retval None
+ */
+#define __HAL_FMPI2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, FMPI2C_CR2_NACK))
+/**
+ * @}
+ */
+
+/* Include FMPI2C HAL Extended module */
+#include "stm32f4xx_hal_fmpi2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FMPI2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hfmpi2c);
+HAL_StatusTypeDef HAL_FMPI2C_DeInit (FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hfmpi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions ****************************************************/
+ /******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Sequential_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_FMPI2C_EnableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c);
+HAL_StatusTypeDef HAL_FMPI2C_DisableListen_IT(FMPI2C_HandleTypeDef *hfmpi2c);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Abort_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress);
+
+ /******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* FMPI2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_AddrCallback(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_FMPI2C_ListenCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+void HAL_FMPI2C_AbortCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @{
+ */
+/* Peripheral State, Mode and Error functions *********************************/
+HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hfmpi2c);
+HAL_FMPI2C_ModeTypeDef HAL_FMPI2C_GetMode(FMPI2C_HandleTypeDef *hfmpi2c);
+uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hfmpi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Constants FMPI2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Macro FMPI2C Private Macros
+ * @{
+ */
+
+#define IS_FMPI2C_ADDRESSING_MODE(MODE) (((MODE) == FMPI2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == FMPI2C_ADDRESSINGMODE_10BIT))
+
+#define IS_FMPI2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == FMPI2C_DUALADDRESS_ENABLE))
+
+#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPI2C_OA2_NOMASK) || \
+ ((MASK) == FMPI2C_OA2_MASK01) || \
+ ((MASK) == FMPI2C_OA2_MASK02) || \
+ ((MASK) == FMPI2C_OA2_MASK03) || \
+ ((MASK) == FMPI2C_OA2_MASK04) || \
+ ((MASK) == FMPI2C_OA2_MASK05) || \
+ ((MASK) == FMPI2C_OA2_MASK06) || \
+ ((MASK) == FMPI2C_OA2_MASK07))
+
+#define IS_FMPI2C_GENERAL_CALL(CALL) (((CALL) == FMPI2C_GENERALCALL_DISABLE) || \
+ ((CALL) == FMPI2C_GENERALCALL_ENABLE))
+
+#define IS_FMPI2C_NO_STRETCH(STRETCH) (((STRETCH) == FMPI2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == FMPI2C_NOSTRETCH_ENABLE))
+
+#define IS_FMPI2C_MEMADD_SIZE(SIZE) (((SIZE) == FMPI2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == FMPI2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == FMPI2C_RELOAD_MODE) || \
+ ((MODE) == FMPI2C_AUTOEND_MODE) || \
+ ((MODE) == FMPI2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == FMPI2C_GENERATE_STOP) || \
+ ((REQUEST) == FMPI2C_GENERATE_START_READ) || \
+ ((REQUEST) == FMPI2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == FMPI2C_NO_STARTSTOP))
+
+#define IS_FMPI2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == FMPI2C_FIRST_FRAME) || \
+ ((REQUEST) == FMPI2C_NEXT_FRAME) || \
+ ((REQUEST) == FMPI2C_FIRST_AND_LAST_FRAME) || \
+ ((REQUEST) == FMPI2C_LAST_FRAME))
+
+#define FMPI2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_RD_WRN)))
+
+#define FMPI2C_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & FMPI2C_ISR_ADDCODE) >> 16)
+#define FMPI2C_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & FMPI2C_ISR_DIR) >> 16)
+#define FMPI2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & FMPI2C_CR2_AUTOEND)
+#define FMPI2C_GET_OWN_ADDRESS1(__HANDLE__) ((__HANDLE__)->Instance->OAR1 & FMPI2C_OAR1_OA1)
+#define FMPI2C_GET_OWN_ADDRESS2(__HANDLE__) ((__HANDLE__)->Instance->OAR2 & FMPI2C_OAR2_OA2)
+
+#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FFU)
+#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+#define FMPI2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define FMPI2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+#define FMPI2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == FMPI2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & (~FMPI2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_ADD10) | (FMPI2C_CR2_START)) & (~FMPI2C_CR2_RD_WRN)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f4xx_hal_fmpi2c.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_FMPI2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,258 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FMPI2C Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of FMPI2C Extended peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FMPI2C peripheral Extended features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the FMPI2C interface for STM32F4xx
+ devices contains the following additional features
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+ (+) Disable or enable wakeup from Stop mode
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure Noise Filter and Wake Up Feature
+ (#) Configure FMPI2C Analog noise filter using the function HAL_FMPI2CEx_ConfigAnalogFilter()
+ (#) Configure FMPI2C Digital noise filter using the function HAL_FMPI2CEx_ConfigDigitalFilter()
+ (#) Configure the enable or disable of FMPI2C Wake Up Mode using the functions :
+ (++) HAL_FMPI2CEx_EnableWakeUp()
+ (++) HAL_FMPI2CEx_DisableWakeUp()
+ (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+ (++) HAL_FMPI2CEx_EnableFastModePlus()
+ (++) HAL_FMPI2CEx_DisbleFastModePlus()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FMPI2CEx FMPI2CEx
+ * @brief FMPI2C Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup FMPI2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+ (+) Configure Wake Up Feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure FMPI2C Analog noise filter.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2Cx peripheral.
+ * @param AnalogFilter New state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2CEx_ConfigAnalogFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_FMPI2C_ANALOG_FILTER(AnalogFilter));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* Reset FMPI2Cx ANOFF bit */
+ hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_ANFOFF);
+
+ /* Set analog filter bit*/
+ hfmpi2c->Instance->CR1 |= AnalogFilter;
+
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configure FMPI2C Digital noise filter.
+ * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2Cx peripheral.
+ * @param DigitalFilter Coefficient of digital noise filter between 0x00 and 0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2CEx_ConfigDigitalFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_FMPI2C_DIGITAL_FILTER(DigitalFilter));
+
+ if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* Get the old register value */
+ tmpreg = hfmpi2c->Instance->CR1;
+
+ /* Reset FMPI2Cx DNF bits [11:8] */
+ tmpreg &= ~(FMPI2C_CR1_DFN);
+
+ /* Set FMPI2Cx DNF coefficient */
+ tmpreg |= DigitalFilter << 8U;
+
+ /* Store the new register value */
+ hfmpi2c->Instance->CR1 = tmpreg;
+
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable the FMPI2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref FMPI2CEx_FastModePlus values
+ * @retval None
+ */
+void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Enable fast mode plus driving capability for selected pin */
+ SET_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the FMPI2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref FMPI2CEx_FastModePlus values
+ * @retval None
+ */
+void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Disable fast mode plus driving capability for selected pin */
+ CLEAR_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_fmpi2c_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,163 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FMPI2C HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FMPI2C_EX_H
+#define __STM32F4xx_HAL_FMPI2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMPI2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FMPI2CEx_Exported_Constants FMPI2C Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup FMPI2CEx_Analog_Filter FMPI2C Extended Analog Filter
+ * @{
+ */
+#define FMPI2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000U)
+#define FMPI2C_ANALOGFILTER_DISABLE FMPI2C_CR1_ANFOFF
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2CEx_FastModePlus FMPI2C Extended Fast Mode Plus
+ * @{
+ */
+#define FMPI2C_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C1 SCL pins */
+#define FMPI2C_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C1 SDA pins */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup FMPI2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_FMPI2CEx_ConfigAnalogFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_FMPI2CEx_ConfigDigitalFilter(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter);
+void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMPI2CEx_Private_Constants FMPI2C Extended Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FMPI2CEx_Private_Macro FMPI2C Extended Private Macros
+ * @{
+ */
+#define IS_FMPI2C_ANALOG_FILTER(FILTER) (((FILTER) == FMPI2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == FMPI2C_ANALOGFILTER_DISABLE))
+
+#define IS_FMPI2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+
+#define IS_FMPI2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SCL)) == FMPI2C_FASTMODEPLUS_SCL) || \
+ (((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SDA)) == FMPI2C_FASTMODEPLUS_SDA))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup FMPI2CEx_Private_Functions FMPI2C Extended Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f4xx_hal_fmpi2c_ex.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FMPI2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,547 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief GPIO HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the General Purpose Input/Output (GPIO) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### GPIO Peripheral features #####
+ ==============================================================================
+ [..]
+ Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
+ port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
+ in several modes:
+ (+) Input mode
+ (+) Analog mode
+ (+) Output mode
+ (+) Alternate function mode
+ (+) External interrupt/event lines
+
+ [..]
+ During and just after reset, the alternate functions and external interrupt
+ lines are not active and the I/O ports are configured in input floating mode.
+
+ [..]
+ All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+ activated or not.
+
+ [..]
+ In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+ type and the IO speed can be selected depending on the VDD value.
+
+ [..]
+ All ports have external interrupt/event capability. To use external interrupt
+ lines, the port must be configured in input mode. All available GPIO pins are
+ connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+ [..]
+ The external interrupt/event controller consists of up to 23 edge detectors
+ (16 lines are connected to GPIO) for generating event/interrupt requests (each
+ input line can be independently configured to select the type (interrupt or event)
+ and the corresponding trigger event (rising or falling or both). Each line can
+ also be masked independently.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
+
+ (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+ (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+ (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+ structure.
+ (++) In case of Output or alternate function mode selection: the speed is
+ configured through "Speed" member from GPIO_InitTypeDef structure.
+ (++) In alternate mode is selection, the alternate function connected to the IO
+ is configured through "Alternate" member from GPIO_InitTypeDef structure.
+ (++) Analog mode is required when a pin is to be used as ADC channel
+ or DAC output.
+ (++) In case of external interrupt/event selection the "Mode" member from
+ GPIO_InitTypeDef structure select the type (interrupt or event) and
+ the corresponding trigger event (rising or falling or both).
+
+ (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+ mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+ HAL_NVIC_EnableIRQ().
+
+ (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+ (#) To set/reset the level of a pin configured in output mode use
+ HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+ (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+
+ (#) During and just after reset, the alternate functions are not
+ active and the GPIO pins are configured in input floating mode (except JTAG
+ pins).
+
+ (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+ (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
+ priority over the GPIO function.
+
+ (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+ general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
+ The HSE has priority over the GPIO function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIO GPIO
+ * @brief GPIO HAL module driver
+ * @{
+ */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+#define GPIO_MODE ((uint32_t)0x00000003U)
+#define EXTI_MODE ((uint32_t)0x10000000U)
+#define GPIO_MODE_IT ((uint32_t)0x00010000U)
+#define GPIO_MODE_EVT ((uint32_t)0x00020000U)
+#define RISING_EDGE ((uint32_t)0x00100000U)
+#define FALLING_EDGE ((uint32_t)0x00200000U)
+#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010U)
+
+#define GPIO_NUMBER ((uint32_t)16U)
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize and de-initialize the GPIOs
+ to be ready for use.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+ * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains
+ * the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+ uint32_t position;
+ uint32_t ioposition = 0x00U;
+ uint32_t iocurrent = 0x00U;
+ uint32_t temp = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+ assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+ assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+ /* Configure the port pins */
+ for(position = 0U; position < GPIO_NUMBER; position++)
+ {
+ /* Get the IO position */
+ ioposition = ((uint32_t)0x01U) << position;
+ /* Get the current IO position */
+ iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
+
+ if(iocurrent == ioposition)
+ {
+ /*--------------------- GPIO Mode Configuration ------------------------*/
+ /* In case of Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Alternate function parameter */
+ assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+ /* Configure Alternate function mapped with the current IO */
+ temp = GPIOx->AFR[position >> 3U];
+ temp &= ~((uint32_t)0xFU << ((uint32_t)(position & (uint32_t)0x07U) * 4U)) ;
+ temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07U) * 4U));
+ GPIOx->AFR[position >> 3U] = temp;
+ }
+
+ /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+ temp = GPIOx->MODER;
+ temp &= ~(GPIO_MODER_MODER0 << (position * 2U));
+ temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U));
+ GPIOx->MODER = temp;
+
+ /* In case of Output or Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+ (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Speed parameter */
+ assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+ /* Configure the IO Speed */
+ temp = GPIOx->OSPEEDR;
+ temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+ temp |= (GPIO_Init->Speed << (position * 2U));
+ GPIOx->OSPEEDR = temp;
+
+ /* Configure the IO Output Type */
+ temp = GPIOx->OTYPER;
+ temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+ temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position);
+ GPIOx->OTYPER = temp;
+ }
+
+ /* Activate the Pull-up or Pull down resistor for the current IO */
+ temp = GPIOx->PUPDR;
+ temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+ temp |= ((GPIO_Init->Pull) << (position * 2U));
+ GPIOx->PUPDR = temp;
+
+ /*--------------------- EXTI Mode Configuration ------------------------*/
+ /* Configure the External Interrupt or event for the current IO */
+ if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ {
+ /* Enable SYSCFG Clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ temp = SYSCFG->EXTICR[position >> 2U];
+ temp &= ~(((uint32_t)0x0FU) << (4U * (position & 0x03U)));
+ temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U)));
+ SYSCFG->EXTICR[position >> 2U] = temp;
+
+ /* Clear EXTI line configuration */
+ temp = EXTI->IMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->IMR = temp;
+
+ temp = EXTI->EMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->EMR = temp;
+
+ /* Clear Rising Falling edge configuration */
+ temp = EXTI->RTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->RTSR = temp;
+
+ temp = EXTI->FTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->FTSR = temp;
+ }
+ }
+ }
+}
+
+/**
+ * @brief De-initializes the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
+{
+ uint32_t position;
+ uint32_t ioposition = 0x00U;
+ uint32_t iocurrent = 0x00U;
+ uint32_t tmp = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+
+ /* Configure the port pins */
+ for(position = 0U; position < GPIO_NUMBER; position++)
+ {
+ /* Get the IO position */
+ ioposition = ((uint32_t)0x01U) << position;
+ /* Get the current IO position */
+ iocurrent = (GPIO_Pin) & ioposition;
+
+ if(iocurrent == ioposition)
+ {
+ /*------------------------- GPIO Mode Configuration --------------------*/
+ /* Configure IO Direction in Input Floating Mode */
+ GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U));
+
+ /* Configure the default Alternate Function in current IO */
+ GPIOx->AFR[position >> 3U] &= ~((uint32_t)0xFU << ((uint32_t)(position & (uint32_t)0x07U) * 4U)) ;
+
+ /* Configure the default value for IO Speed */
+ GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+
+ /* Configure the default value IO Output Type */
+ GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+ /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+ GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+
+ /*------------------------- EXTI Mode Configuration --------------------*/
+ tmp = SYSCFG->EXTICR[position >> 2U];
+ tmp &= (((uint32_t)0x0FU) << (4U * (position & 0x03U)));
+ if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U))))
+ {
+ /* Configure the External Interrupt or event for the current IO */
+ tmp = ((uint32_t)0x0FU) << (4U * (position & 0x03U));
+ SYSCFG->EXTICR[position >> 2U] &= ~tmp;
+
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~((uint32_t)iocurrent);
+ EXTI->EMR &= ~((uint32_t)iocurrent);
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~((uint32_t)iocurrent);
+ EXTI->FTSR &= ~((uint32_t)iocurrent);
+ }
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @brief GPIO Read and Write
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads the specified input port pin.
+ * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_PIN_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ GPIO_PinState bitstatus;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+ {
+ bitstatus = GPIO_PIN_SET;
+ }
+ else
+ {
+ bitstatus = GPIO_PIN_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Sets or clears the selected data port bit.
+ *
+ * @note This function uses GPIOx_BSRR register to allow atomic read/modify
+ * accesses. In this way, there is no risk of an IRQ occurring between
+ * the read and the modify access.
+ *
+ * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @param PinState: specifies the value to be written to the selected bit.
+ * This parameter can be one of the GPIO_PinState enum values:
+ * @arg GPIO_PIN_RESET: to clear the port pin
+ * @arg GPIO_PIN_SET: to set the port pin
+ * @retval None
+ */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+ if(PinState != GPIO_PIN_RESET)
+ {
+ GPIOx->BSRR = GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U;
+ }
+}
+
+/**
+ * @brief Toggles the specified GPIO pins.
+ * @param GPIOx: Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+ * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+ * @param GPIO_Pin: Specifies the pins to be toggled.
+ * @retval None
+ */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+ * @brief Locks GPIO Pins configuration registers.
+ * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+ * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+ * @note The configuration of the locked GPIO pins can no longer be modified
+ * until the next reset.
+ * @param GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F4 family
+ * @param GPIO_Pin: specifies the port bit to be locked.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Apply lock key write sequence */
+ tmp |= GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+ {
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief This function handles EXTI interrupt request.
+ * @param GPIO_Pin: Specifies the pins connected EXTI line
+ * @retval None
+ */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+ /* EXTI line interrupt detected */
+ if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+ {
+ __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+ HAL_GPIO_EXTI_Callback(GPIO_Pin);
+ }
+}
+
+/**
+ * @brief EXTI line detection callbacks.
+ * @param GPIO_Pin: Specifies the pins connected EXTI line
+ * @retval None
+ */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(GPIO_Pin);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_GPIO_EXTI_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,327 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_H
+#define __STM32F4xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFFU) /* PIN mask for assert test */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000U) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001U) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011U) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002U) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012U) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003U) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed_define GPIO speed define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< IO works at 2 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_MEDIUM ((uint32_t)0x00000001U) /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_HIGH ((uint32_t)0x00000002U) /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_VERY_HIGH ((uint32_t)0x00000003U) /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000U) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001U) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002U) /*!< Pull-down activation */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f4xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00U)
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_gpio_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1452 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_EX_H
+#define __STM32F4xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
+ * @{
+ */
+
+/*------------------------------------------ STM32F429xx/STM32F439xx ---------*/
+#if defined(STM32F429xx) || defined(STM32F439xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_LTDC ((uint8_t)0x09U) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_LTDC ((uint8_t)0x0EU) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F429xx || STM32F439xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
+/** @brief GPIO_Legacy
+ */
+#define GPIO_AF5_I2S3ext GPIO_AF5_SPI3 /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F427xx || STM32F437xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx------------------*/
+#if defined(STM32F407xx) || defined(STM32F417xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0x0CU) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F407xx || STM32F417xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0x0CU) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F405xx || STM32F415xx */
+
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09U) /* I2C3 Alternate Function mapping */
+
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F401xC || STM32F401xE */
+/*----------------------------------------------------------------------------*/
+
+/*--------------- STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-------------*/
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04U) /* FMPI2C1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4/I2S4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06U) /* SPI4/I2S4 Alternate Function mapping */
+#define GPIO_AF6_SPI5 ((uint8_t)0x06U) /* SPI5/I2S5 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_DFSDM1 ((uint8_t)0x06U) /* DFSDM1 Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_USART3 ((uint8_t)0x08U) /* USART3 Alternate Function mapping */
+#define GPIO_AF8_DFSDM1 ((uint8_t)0x08U) /* DFSDM1 Alternate Function mapping */
+#define GPIO_AF8_CAN1 ((uint8_t)0x08U) /* CAN1 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09U) /* FMPI2C1 Alternate Function mapping */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_QSPI ((uint8_t)0x09U) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_DFSDM1 ((uint8_t)0x0AU) /* DFSDM1 Alternate Function mapping */
+#define GPIO_AF10_QSPI ((uint8_t)0x0AU) /* QSPI Alternate Function mapping */
+#define GPIO_AF10_FMC ((uint8_t)0x0AU) /* FMC Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+#define GPIO_AF12_FSMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*---------------------------------------- STM32F411xx------------------------*/
+#if defined(STM32F411xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06U) /* SPI4/I2S4 Alternate Function mapping */
+#define GPIO_AF6_SPI5 ((uint8_t)0x06U) /* SPI5/I2S5 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F411xE */
+
+/*---------------------------------------- STM32F410xx------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_LPTIM1 ((uint8_t)0x01U) /* LPTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04U) /* FMPI2C1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#if defined(STM32F410Cx) || defined(STM32F410Rx)
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#endif /* STM32F410Cx || STM32F410Rx */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06U) /* SPI1 Alternate Function mapping */
+#if defined(STM32F410Cx) || defined(STM32F410Rx)
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* I2S2 Alternate Function mapping */
+#endif /* STM32F410Cx || STM32F410Rx */
+#define GPIO_AF6_SPI5 ((uint8_t)0x06U) /* SPI5/I2S5 Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09U) /* FMPI2C1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/*---------------------------------------- STM32F446xx -----------------------*/
+#if defined(STM32F446xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+#define GPIO_AF3_CEC ((uint8_t)0x03U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04U) /* FMPI2C1 Alternate Function mapping */
+#define GPIO_AF4_CEC ((uint8_t)0x04U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
+#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_SPDIFRX ((uint8_t)0x07U) /* SPDIFRX Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_SPDIFRX ((uint8_t)0x08U) /* SPDIFRX Alternate Function mapping */
+#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_QSPI ((uint8_t)0x09U) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_SAI2 ((uint8_t)0x0AU) /* SAI2 Alternate Function mapping */
+#define GPIO_AF10_QSPI ((uint8_t)0x0AU) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#endif /* STM32F446xx */
+/*----------------------------------------------------------------------------*/
+
+/*-------------------------------- STM32F469xx/STM32F479xx--------------------*/
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06U) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07U) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_LTDC ((uint8_t)0x09U) /* LCD-TFT Alternate Function mapping */
+#define GPIO_AF9_QSPI ((uint8_t)0x09U) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0x0AU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0x0AU) /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_QSPI ((uint8_t)0x0AU) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0x0CU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0CU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0x0CU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+#define GPIO_AF13_DSI ((uint8_t)0x0DU) /* DSI Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_LTDC ((uint8_t)0x0EU) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#endif /* STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
+ * @{
+ */
+/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U :\
+ ((__GPIOx__) == (GPIOI))? 8U : 9U)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U :\
+ ((__GPIOx__) == (GPIOI))? 8U :\
+ ((__GPIOx__) == (GPIOJ))? 9U : 10U)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOH))? 7U : 8U)
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F446xx) || defined(STM32F412Zx) ||defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U : 8U)
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
+ * @{
+ */
+/*------------------------- STM32F429xx/STM32F439xx---------------------------*/
+#if defined(STM32F429xx) || defined(STM32F439xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF14_LTDC))
+
+#endif /* STM32F429xx || STM32F439xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1))
+
+#endif /* STM32F427xx || STM32F437xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx------------------*/
+#if defined(STM32F407xx) || defined(STM32F417xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F407xx || STM32F417xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F405xx || STM32F415xx */
+
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F401xC || STM32F401xE */
+/*----------------------------------------------------------------------------*/
+/*---------------------------------------- STM32F410xx------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_GPIO_AF(AF) (((AF) < 10U) || ((AF) == 15U))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/*---------------------------------------- STM32F411xx------------------------*/
+#if defined(STM32F411xE)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F411xE */
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------------------------- STM32F446xx ----------------*/
+#if defined(STM32F446xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI2) || \
+ ((AF) == GPIO_AF6_SPI4) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPI2) || ((AF) == GPIO_AF7_SPI3) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF9_QSPI) || \
+ ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QSPI))
+
+#endif /* STM32F446xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------------------------- STM32F469xx/STM32F479xx --------*/
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI) || \
+ ((AF) == GPIO_AF9_QSPI) || ((AF) == GPIO_AF10_QSPI))
+
+#endif /* STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-----------*/
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 11U) && ((AF) != 14U) && ((AF) != 13U))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*----------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1868 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief HASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the HASH peripheral:
+ * + Initialization and de-initialization functions
+ * + HASH/HMAC Processing functions by algorithm using polling mode
+ * + HASH/HMAC functions by algorithm using interrupt mode
+ * + HASH/HMAC functions by algorithm using DMA mode
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The HASH HAL driver can be used as follows:
+ (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
+ (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
+ (##) In case of using processing APIs based on interrupts (e.g. HAL_HMAC_SHA1_Start_IT())
+ (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
+ (##) In case of using DMA to control data transfer (e.g. HAL_HMAC_SHA1_Start_DMA())
+ (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+ (+++) Configure and enable one DMA stream one for managing data transfer from
+ memory to peripheral (input stream). Managing data transfer from
+ peripheral to memory can be performed only using CPU
+ (+++) Associate the initialized DMA handle to the HASH DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA Stream using HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+ (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
+ (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
+ (##) For HMAC, the encryption key.
+ (##) For HMAC, the key size used for encryption.
+ (#)Three processing functions are available:
+ (##) Polling mode: processing APIs are blocking functions
+ i.e. they process the data and wait till the digest computation is finished
+ e.g. HAL_HASH_SHA1_Start()
+ (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+ i.e. they process the data under interrupt
+ e.g. HAL_HASH_SHA1_Start_IT()
+ (##) DMA mode: processing APIs are not blocking functions and the CPU is
+ not used for data transfer i.e. the data transfer is ensured by DMA
+ e.g. HAL_HASH_SHA1_Start_DMA()
+ (#)When the processing function is called at first time after HAL_HASH_Init()
+ the HASH peripheral is initialized and processes the buffer in input.
+ After that, the digest computation is started.
+ When processing multi-buffer use the accumulate function to write the
+ data in the peripheral without starting the digest computation. In last
+ buffer use the start function to input the last buffer ans start the digest
+ computation.
+ (##) e.g. HAL_HASH_SHA1_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
+ (##) write (n-1)th data buffer in the peripheral without starting the digest computation
+ (##) HAL_HASH_SHA1_Start() : write (n)th data buffer in the peripheral and start the digest computation
+ (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
+ (#)In case of using DMA, call the DMA start processing e.g. HAL_HASH_SHA1_Start_DMA().
+ After that, call the finish function in order to get the digest value
+ e.g. HAL_HASH_SHA1_Finish()
+ (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HASH HASH
+ * @brief HASH HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+ * @{
+ */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void HASH_DMAError(DMA_HandleTypeDef *hdma);
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
+static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup HASH_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief DMA HASH Input Data complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ uint32_t inputaddr = 0U;
+ uint32_t buffersize = 0U;
+
+ if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
+ {
+ /* Disable the DMA transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ else
+ {
+ /* Increment Interrupt counter */
+ hhash->HashInCount++;
+ /* Disable the DMA transfer before starting the next transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ if(hhash->HashInCount <= 2U)
+ {
+ /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
+ if(hhash->HashInCount == 1U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ buffersize = hhash->HashBuffSize;
+ }
+ /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
+ else if(hhash->HashInCount == 2U)
+ {
+ inputaddr = (uint32_t)hhash->Init.pKey;
+ buffersize = hhash->Init.KeySize;
+ }
+ /* Configure the number of valid bits in last word of the message */
+ MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8U * (buffersize % 4U));
+
+ /* Set the HASH DMA transfer complete */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4U ? (buffersize+3U)/4U:buffersize/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+ }
+ else
+ {
+ /* Disable the DMA transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ /* Reset the InCount */
+ hhash->HashInCount = 0U;
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+}
+
+/**
+ * @brief DMA HASH communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void HASH_DMAError(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hhash->State= HAL_HASH_STATE_READY;
+ HAL_HASH_ErrorCallback(hhash);
+}
+
+/**
+ * @brief Writes the input buffer in data register.
+ * @param pInBuffer: Pointer to input buffer
+ * @param Size: The size of input buffer
+ * @retval None
+ */
+static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t buffercounter;
+ uint32_t inputaddr = (uint32_t) pInBuffer;
+
+ for(buffercounter = 0U; buffercounter < Size; buffercounter+=4)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+}
+
+/**
+ * @brief Provides the message digest result.
+ * @param pMsgDigest: Pointer to the message digest
+ * @param Size: The size of the message digest in bytes
+ * @retval None
+ */
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
+{
+ uint32_t msgdigest = (uint32_t)pMsgDigest;
+
+ switch(Size)
+ {
+ case 16U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ break;
+ case 20U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ break;
+ case 28U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6U]);
+ break;
+ case 32U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7U]);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HASH_Exported_Functions
+ * @{
+ */
+
+
+/** @addtogroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the HASH according to the specified parameters
+ in the HASH_InitTypeDef and creates the associated handle.
+ (+) DeInitialize the HASH peripheral.
+ (+) Initialize the HASH MSP.
+ (+) DeInitialize HASH MSP.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH according to the specified parameters in the
+ HASH_HandleTypeDef and creates the associated handle.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash)
+{
+ /* Check the hash handle allocation */
+ if(hhash == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_HASH_DATATYPE(hhash->Init.DataType));
+
+ if(hhash->State == HAL_HASH_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hhash->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_HASH_MspInit(hhash);
+ }
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Reset HashInCount, HashBuffSize and HashITCounter */
+ hhash->HashInCount = 0U;
+ hhash->HashBuffSize = 0U;
+ hhash->HashITCounter = 0U;
+
+ /* Set the data type */
+ HASH->CR |= (uint32_t) (hhash->Init.DataType);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Set the default HASH phase */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the HASH peripheral.
+ * @note This API must be called before starting a new processing.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash)
+{
+ /* Check the HASH handle allocation */
+ if(hhash == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Set the default HASH phase */
+ hhash->Phase = HAL_HASH_PHASE_READY;
+
+ /* Reset HashInCount, HashBuffSize and HashITCounter */
+ hhash->HashInCount = 0U;
+ hhash->HashBuffSize = 0U;
+ hhash->HashITCounter = 0U;
+
+ /* DeInit the low level hardware */
+ HAL_HASH_MspDeInit(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH MSP.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+__weak void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes HASH MSP.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+__weak void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Input data transfer complete callback.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+ __weak void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_InCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Data transfer Error callback.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+ __weak void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Digest computation complete callback. It is used only with interrupt.
+ * @note This callback is not relevant with DMA.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+ __weak void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhash);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_HASH_DgstCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group2 HASH processing functions using polling mode
+ * @brief processing functions using polling mode
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using polling mode functions#####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the hash value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
+ The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is multiple of 64 bytes, appending the input buffer is possible.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware
+ * and appending the input buffer is no more possible.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 16U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in MD5 mode then writes the pInBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is multiple of 64 bytes, appending the input buffer is possible.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware
+ * and appending the input buffer is no more possible.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+ The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 20U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @note Input buffer size in bytes must be a multiple of 4 otherwise the digest computation is corrupted.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ /* Check the parameters */
+ assert_param(IS_HASH_SHA1_BUFFER_SIZE(Size));
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group3 HASH processing functions using interrupt mode
+ * @brief processing functions using interrupt mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using interrupt mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in interrupt mode
+ the hash value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
+ * The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+ uint32_t buffercounter;
+ uint32_t inputcounter;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ if(hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ hhash->HashInCount = Size;
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->pHashOutBuffPtr = pOutBuffer;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode */
+ HASH->CR |= HASH_ALGOSELECTION_MD5;
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+ /* Reset interrupt counter */
+ hhash->HashITCounter = 0U;
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+ {
+ outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[0U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[1U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[2U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[3U]);
+
+ if(hhash->HashInCount == 0U)
+ {
+ /* Disable Interrupts */
+ HASH->IMR = 0U;
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Call digest computation complete callback */
+ HAL_HASH_DgstCpltCallback(hhash);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ if(hhash->HashInCount >= 68U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < 64U; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ if(hhash->HashITCounter == 0U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+
+ if(hhash->HashInCount >= 68U)
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 68U;
+ hhash->pHashInBuffPtr+= 68U;
+ }
+ else
+ {
+ hhash->HashInCount = 0U;
+ hhash->pHashInBuffPtr+= hhash->HashInCount;
+ }
+ /* Set Interrupt counter */
+ hhash->HashITCounter = 1U;
+ }
+ else
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 64U;
+ hhash->pHashInBuffPtr+= 64U;
+ }
+ }
+ else
+ {
+ /* Get the buffer address */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Get the buffer counter */
+ inputcounter = hhash->HashInCount;
+ /* Disable Interrupts */
+ HASH->IMR &= ~(HASH_IT_DINI);
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+ if((inputcounter > 4U) && (inputcounter%4U))
+ {
+ inputcounter = (inputcounter+4U-inputcounter%4U);
+ }
+ else if ((inputcounter < 4U) && (inputcounter != 0U))
+ {
+ inputcounter = 4U;
+ }
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < inputcounter/4U; buffercounter++)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Reset buffer counter */
+ hhash->HashInCount = 0U;
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+ * The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+ uint32_t buffercounter;
+ uint32_t inputcounter;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ if(hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ hhash->HashInCount = Size;
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->pHashOutBuffPtr = pOutBuffer;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode */
+ HASH->CR |= HASH_ALGOSELECTION_SHA1;
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+ /* Reset interrupt counter */
+ hhash->HashITCounter = 0U;
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+ {
+ outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[0U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[1U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[2U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[3U]);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(HASH->HR[4U]);
+ if(hhash->HashInCount == 0U)
+ {
+ /* Disable Interrupts */
+ HASH->IMR = 0U;
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Call digest computation complete callback */
+ HAL_HASH_DgstCpltCallback(hhash);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ if(hhash->HashInCount >= 68U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < 64U; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ if(hhash->HashITCounter == 0U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ if(hhash->HashInCount >= 68U)
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 68U;
+ hhash->pHashInBuffPtr+= 68U;
+ }
+ else
+ {
+ hhash->HashInCount = 0U;
+ hhash->pHashInBuffPtr+= hhash->HashInCount;
+ }
+ /* Set Interrupt counter */
+ hhash->HashITCounter = 1U;
+ }
+ else
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 64U;
+ hhash->pHashInBuffPtr+= 64U;
+ }
+ }
+ else
+ {
+ /* Get the buffer address */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Get the buffer counter */
+ inputcounter = hhash->HashInCount;
+ /* Disable Interrupts */
+ HASH->IMR &= ~(HASH_IT_DINI);
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+ if((inputcounter > 4U) && (inputcounter%4U))
+ {
+ inputcounter = (inputcounter+4U-inputcounter%4U);
+ }
+ else if ((inputcounter < 4U) && (inputcounter != 0U))
+ {
+ inputcounter = 4U;
+ }
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < inputcounter/4U; buffercounter++)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Reset buffer counter */
+ hhash->HashInCount = 0U;
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles HASH interrupt request.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash)
+{
+ switch(HASH->CR & HASH_CR_ALGO)
+ {
+ case HASH_ALGOSELECTION_MD5:
+ HAL_HASH_MD5_Start_IT(hhash, NULL, 0U, NULL);
+ break;
+
+ case HASH_ALGOSELECTION_SHA1:
+ HAL_HASH_SHA1_Start_IT(hhash, NULL, 0U, NULL);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group4 HASH processing functions using DMA mode
+ * @brief processing functions using DMA mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using DMA mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the hash value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in MD5 mode then enables DMA to
+ control data transfer. Use HAL_HASH_MD5_Finish() to get the digest.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = (uint32_t)pInBuffer;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+ }
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4U ? (Size+3U)/4U:Size/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the computed digest in MD5 mode
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 16U);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA1 mode then enables DMA to
+ control data transfer. Use HAL_HASH_SHA1_Finish() to get the digest.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = (uint32_t)pInBuffer;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA1;
+ HASH->CR |= HASH_CR_INIT;
+ }
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4U ? (Size+3U)/4U:Size/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the computed digest in SHA1 mode.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 20U);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process UnLock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group5 HASH-MAC (HMAC) processing functions using polling mode
+ * @brief HMAC processing functions using polling mode .
+ *
+@verbatim
+ ===============================================================================
+ ##### HMAC processing using polling mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the HMAC value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC MD5 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC MD5 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC MD5 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /************************** STEP 1 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 2 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 3 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 16U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA1 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA1 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC SHA1 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /************************** STEP 1 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 2 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 3 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the message digest */
+ HASH_GetDigest(pOutBuffer, 20U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group6 HASH-MAC (HMAC) processing functions using DMA mode
+ * @brief HMAC processing functions using DMA mode .
+ *
+@verbatim
+ ===============================================================================
+ ##### HMAC processing using DMA mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the HMAC value using one of the following algorithms:
+ (+) MD5
+ (+) SHA1
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC MD5 mode
+ * then enables DMA to control data transfer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Save buffer pointer and size in handle */
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->HashBuffSize = Size;
+ hhash->HashInCount = 0U;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC MD5 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC MD5 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Get the key address */
+ inputaddr = (uint32_t)(hhash->Init.pKey);
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4U ? (hhash->Init.KeySize+3U)/4U:hhash->Init.KeySize/4U));
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA1 mode
+ * then enables DMA to control data transfer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Save buffer pointer and size in handle */
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->HashBuffSize = Size;
+ hhash->HashInCount = 0U;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA1 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC SHA1 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Get the key address */
+ inputaddr = (uint32_t)(hhash->Init.pKey);
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4U ? (hhash->Init.KeySize+3U)/4U:hhash->Init.KeySize/4U));
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Functions_Group7 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the HASH state
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval HAL state
+ */
+HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash)
+{
+ return hhash->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx || STM32F479xx */
+#endif /* HAL_HASH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,451 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of HASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_H
+#define __STM32F4xx_HAL_HASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASH
+ * @brief HASH HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Types HASH Exported Types
+ * @{
+ */
+
+/** @defgroup HASH_Exported_Types_Group1 HASH Configuration Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref HASH_Data_Type */
+
+ uint32_t KeySize; /*!< The key size is used only in HMAC operation */
+
+ uint8_t* pKey; /*!< The key is used only in HMAC operation */
+}HASH_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Types_Group2 HASH State structures definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_HASH_STATE_RESET = 0x00U, /*!< HASH not yet initialized or disabled */
+ HAL_HASH_STATE_READY = 0x01U, /*!< HASH initialized and ready for use */
+ HAL_HASH_STATE_BUSY = 0x02U, /*!< HASH internal process is ongoing */
+ HAL_HASH_STATE_TIMEOUT = 0x03U, /*!< HASH timeout state */
+ HAL_HASH_STATE_ERROR = 0x04U /*!< HASH error state */
+}HAL_HASH_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Types_Group3 HASH phase structures definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_HASH_PHASE_READY = 0x01U, /*!< HASH peripheral is ready for initialization */
+ HAL_HASH_PHASE_PROCESS = 0x02U /*!< HASH peripheral is in processing phase */
+}HAL_HASH_PhaseTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Types_Group4 HASH Handle structures definition
+ * @{
+ */
+
+typedef struct
+{
+ HASH_InitTypeDef Init; /*!< HASH required parameters */
+
+ uint8_t *pHashInBuffPtr; /*!< Pointer to input buffer */
+
+ uint8_t *pHashOutBuffPtr; /*!< Pointer to input buffer */
+
+ __IO uint32_t HashBuffSize; /*!< Size of buffer to be processed */
+
+ __IO uint32_t HashInCount; /*!< Counter of inputed data */
+
+ __IO uint32_t HashITCounter; /*!< Counter of issued interrupts */
+
+ HAL_StatusTypeDef Status; /*!< HASH peripheral status */
+
+ HAL_HASH_PhaseTypeDef Phase; /*!< HASH peripheral phase */
+
+ DMA_HandleTypeDef *hdmain; /*!< HASH In DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< HASH locking object */
+
+ __IO HAL_HASH_StateTypeDef State; /*!< HASH peripheral state */
+} HASH_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HASH_Exported_Constants HASH Exported Constants
+ * @{
+ */
+
+/** @defgroup HASH_Exported_Constants_Group1 HASH Algorithm Selection
+ * @{
+ */
+#define HASH_ALGOSELECTION_SHA1 ((uint32_t)0x00000000U) /*!< HASH function is SHA1 */
+#define HASH_ALGOSELECTION_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */
+#define HASH_ALGOSELECTION_SHA256 HASH_CR_ALGO /*!< HASH function is SHA256 */
+#define HASH_ALGOSELECTION_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group2 HASH Algorithm Mode
+ * @{
+ */
+#define HASH_ALGOMODE_HASH ((uint32_t)0x00000000U) /*!< Algorithm is HASH */
+#define HASH_ALGOMODE_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Data_Type HASH Data Type
+ * @{
+ */
+#define HASH_DATATYPE_32B ((uint32_t)0x00000000U) /*!< 32-bit data. No swapping */
+#define HASH_DATATYPE_16B HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */
+#define HASH_DATATYPE_8B HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */
+#define HASH_DATATYPE_1B HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group4 HASH HMAC Long key
+ * @brief HASH HMAC Long key used only for HMAC mode
+ * @{
+ */
+#define HASH_HMAC_KEYTYPE_SHORTKEY ((uint32_t)0x00000000U) /*!< HMAC Key is <= 64 bytes */
+#define HASH_HMAC_KEYTYPE_LONGKEY HASH_CR_LKEY /*!< HMAC Key is > 64 bytes */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group5 HASH Flags definition
+ * @{
+ */
+#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */
+#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */
+#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
+#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy : processing a block of data */
+#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : The input buffer contains at least one word of data */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group6 HASH Interrupts definition
+ * @{
+ */
+#define HASH_IT_DINI HASH_IMR_DINIE /*!< A new block can be entered into the input buffer (DIN) */
+#define HASH_IT_DCI HASH_IMR_DCIE /*!< Digest calculation complete */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Macros HASH Exported Macros
+ * @{
+ */
+
+/** @brief Reset HASH handle state
+ * @param __HANDLE__: specifies the HASH handle.
+ * @retval None
+ */
+#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET)
+
+/** @brief Check whether the specified HASH flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg HASH_FLAG_DINIS: A new block can be entered into the input buffer.
+ * @arg HASH_FLAG_DCIS: Digest calculation complete
+ * @arg HASH_FLAG_DMAS: DMA interface is enabled (DMAE=1) or a transfer is ongoing
+ * @arg HASH_FLAG_BUSY: The hash core is Busy : processing a block of data
+ * @arg HASH_FLAG_DINNE: DIN not empty : The input buffer contains at least one word of data
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_HASH_GET_FLAG(__FLAG__) (((__FLAG__) > 8U) ? ((HASH->CR & (__FLAG__)) == (__FLAG__)) :\
+ ((HASH->SR & (__FLAG__)) == (__FLAG__)))
+
+/**
+ * @brief Enable the multiple DMA mode.
+ * This feature is available only in STM32F429x and STM32F439x devices.
+ * @retval None
+ */
+#define __HAL_HASH_SET_MDMAT() HASH->CR |= HASH_CR_MDMAT
+
+/**
+ * @brief Disable the multiple DMA mode.
+ * @retval None
+ */
+#define __HAL_HASH_RESET_MDMAT() HASH->CR &= (uint32_t)(~HASH_CR_MDMAT)
+
+/**
+ * @brief Start the digest computation
+ * @retval None
+ */
+#define __HAL_HASH_START_DIGEST() HASH->STR |= HASH_STR_DCAL
+
+/**
+ * @brief Set the number of valid bits in last word written in Data register
+ * @param SIZE: size in byte of last data written in Data register.
+ * @retval None
+*/
+#define __HAL_HASH_SET_NBVALIDBITS(SIZE) do{HASH->STR &= ~(HASH_STR_NBLW);\
+ HASH->STR |= 8U * ((SIZE) % 4U);\
+ }while(0)
+
+/**
+ * @}
+ */
+
+/* Include HASH HAL Extension module */
+#include "stm32f4xx_hal_hash_ex.h"
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASH_Exported_Functions HASH Exported Functions
+ * @{
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group3
+ * @{
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group4
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group5
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group6
+ * @{
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group7
+ * @{
+ */
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group8
+ * @{
+ */
+HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASH_Private_Types HASH Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Variables HASH Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Constants HASH Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASH_Private_Macros HASH Private Macros
+ * @{
+ */
+#define IS_HASH_ALGOSELECTION(__ALGOSELECTION__) (((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA1) || \
+ ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA224) || \
+ ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA256) || \
+ ((__ALGOSELECTION__) == HASH_ALGOSELECTION_MD5))
+
+
+#define IS_HASH_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == HASH_ALGOMODE_HASH) || \
+ ((__ALGOMODE__) == HASH_ALGOMODE_HMAC))
+
+
+#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_DATATYPE_32B)|| \
+ ((__DATATYPE__) == HASH_DATATYPE_16B)|| \
+ ((__DATATYPE__) == HASH_DATATYPE_8B) || \
+ ((__DATATYPE__) == HASH_DATATYPE_1B))
+
+
+#define IS_HASH_HMAC_KEYTYPE(__KEYTYPE__) (((__KEYTYPE__) == HASH_HMAC_KEYTYPE_SHORTKEY) || \
+ ((__KEYTYPE__) == HASH_HMAC_KEYTYPE_LONGKEY))
+
+#define IS_HASH_SHA1_BUFFER_SIZE(__SIZE__) ((((__SIZE__)%4) != 0U)? 0U: 1U)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_HASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1638 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief HASH HAL Extension module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of HASH peripheral:
+ * + Extended HASH processing functions based on SHA224 Algorithm
+ * + Extended HASH processing functions based on SHA256 Algorithm
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The HASH HAL driver can be used as follows:
+ (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
+ (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
+ (##) In case of using processing APIs based on interrupts (e.g. HAL_HMACEx_SHA224_Start())
+ (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
+ (##) In case of using DMA to control data transfer (e.g. HAL_HMACEx_SH224_Start_DMA())
+ (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+ (+++) Configure and enable one DMA stream one for managing data transfer from
+ memory to peripheral (input stream). Managing data transfer from
+ peripheral to memory can be performed only using CPU
+ (+++) Associate the initialized DMA handle to the HASH DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA Stream: HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+ (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
+ (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
+ (##) For HMAC, the encryption key.
+ (##) For HMAC, the key size used for encryption.
+ (#)Three processing functions are available:
+ (##) Polling mode: processing APIs are blocking functions
+ i.e. they process the data and wait till the digest computation is finished
+ e.g. HAL_HASHEx_SHA224_Start()
+ (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+ i.e. they process the data under interrupt
+ e.g. HAL_HASHEx_SHA224_Start_IT()
+ (##) DMA mode: processing APIs are not blocking functions and the CPU is
+ not used for data transfer i.e. the data transfer is ensured by DMA
+ e.g. HAL_HASHEx_SHA224_Start_DMA()
+ (#)When the processing function is called at first time after HAL_HASH_Init()
+ the HASH peripheral is initialized and processes the buffer in input.
+ After that, the digest computation is started.
+ When processing multi-buffer use the accumulate function to write the
+ data in the peripheral without starting the digest computation. In last
+ buffer use the start function to input the last buffer ans start the digest
+ computation.
+ (##) e.g. HAL_HASHEx_SHA224_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
+ (##) write (n-1)th data buffer in the peripheral without starting the digest computation
+ (##) HAL_HASHEx_SHA224_Start() : write (n)th data buffer in the peripheral and start the digest computation
+ (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
+ (#)In case of using DMA, call the DMA start processing e.g. HAL_HASHEx_SHA224_Start_DMA().
+ After that, call the finish function in order to get the digest value
+ e.g. HAL_HASHEx_SHA224_Finish()
+ (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HASHEx HASHEx
+ * @brief HASH Extension HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+
+#if defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup HASHEx_Private_Functions
+ * @{
+ */
+static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size);
+static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
+static void HASHEx_DMAError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup HASHEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Writes the input buffer in data register.
+ * @param pInBuffer: Pointer to input buffer
+ * @param Size: The size of input buffer
+ * @retval None
+ */
+static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t buffercounter;
+ uint32_t inputaddr = (uint32_t) pInBuffer;
+
+ for(buffercounter = 0U; buffercounter < Size; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+}
+
+/**
+ * @brief Provides the message digest result.
+ * @param pMsgDigest: Pointer to the message digest
+ * @param Size: The size of the message digest in bytes
+ * @retval None
+ */
+static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
+{
+ uint32_t msgdigest = (uint32_t)pMsgDigest;
+
+ switch(Size)
+ {
+ case 16U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ break;
+ case 20U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ break;
+ case 28U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6U]);
+ break;
+ case 32U:
+ /* Read the message digest */
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[0U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[1U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[2U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[3U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH->HR[4U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6U]);
+ msgdigest+=4U;
+ *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7U]);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief DMA HASH Input Data complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ uint32_t inputaddr = 0U;
+ uint32_t buffersize = 0U;
+
+ if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
+ {
+ /* Disable the DMA transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ else
+ {
+ /* Increment Interrupt counter */
+ hhash->HashInCount++;
+ /* Disable the DMA transfer before starting the next transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ if(hhash->HashInCount <= 2U)
+ {
+ /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
+ if(hhash->HashInCount == 1U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ buffersize = hhash->HashBuffSize;
+ }
+ /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
+ else if(hhash->HashInCount == 2U)
+ {
+ inputaddr = (uint32_t)hhash->Init.pKey;
+ buffersize = hhash->Init.KeySize;
+ }
+ /* Configure the number of valid bits in last word of the message */
+ MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8U * (buffersize % 4U));
+
+ /* Set the HASH DMA transfer complete */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4U ? (buffersize+3U)/4U:buffersize/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+ }
+ else
+ {
+ /* Disable the DMA transfer */
+ HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+ /* Reset the InCount */
+ hhash->HashInCount = 0U;
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+}
+
+/**
+ * @brief DMA HASH communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void HASHEx_DMAError(DMA_HandleTypeDef *hdma)
+{
+ HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hhash->State= HAL_HASH_STATE_READY;
+ HAL_HASH_ErrorCallback(hhash);
+}
+
+ /**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HASHEx_Exported_Functions
+ * @{
+ */
+
+/** @defgroup HASHEx_Group1 HASH processing functions
+ * @brief processing functions using polling mode
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using polling mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the hash value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in SHA224 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 28U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+ The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
+ * @param Timeout: Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 32U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the HASH peripheral in SHA224 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+ The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Group2 HMAC processing functions using polling mode
+ * @brief HMAC processing functions using polling mode .
+ *
+@verbatim
+ ===============================================================================
+ ##### HMAC processing using polling mode functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in polling mode
+ the HMAC value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA224 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA224 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC SHA224 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /************************** STEP 1 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 2 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 3 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 28U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA256 mode
+ * then processes pInBuffer. The digest is available in pOutBuffer
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA256 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
+ }
+ else
+ {
+ /* Select the HMAC SHA256 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
+ }
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /************************** STEP 1 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 2 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(pInBuffer, Size);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /************************** STEP 3 ******************************************/
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Write input buffer in data register */
+ HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((HAL_GetTick() - tickstart ) > Timeout)
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 32U);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Group3 HASH processing functions using interrupt mode
+ * @brief processing functions using interrupt mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using interrupt functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in interrupt mode
+ the hash value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in SHA224 mode then processes pInBuffer.
+ * The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+ uint32_t inputaddr;
+ uint32_t buffercounter;
+ uint32_t inputcounter;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ if(hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ hhash->HashInCount = Size;
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->pHashOutBuffPtr = pOutBuffer;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA224 mode */
+ HASH->CR |= HASH_ALGOSELECTION_SHA224;
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+ /* Reset interrupt counter */
+ hhash->HashITCounter = 0U;
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+ {
+ /* Read the message digest */
+ HASHEx_GetDigest(hhash->pHashOutBuffPtr, 28U);
+ if(hhash->HashInCount == 0U)
+ {
+ /* Disable Interrupts */
+ HASH->IMR = 0U;
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Call digest computation complete callback */
+ HAL_HASH_DgstCpltCallback(hhash);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ if(hhash->HashInCount >= 68U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < 64U; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ if(hhash->HashITCounter == 0U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+
+ if(hhash->HashInCount >= 68U)
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 68U;
+ hhash->pHashInBuffPtr+= 68U;
+ }
+ else
+ {
+ hhash->HashInCount = 0U;
+ hhash->pHashInBuffPtr+= hhash->HashInCount;
+ }
+ /* Set Interrupt counter */
+ hhash->HashITCounter = 1U;
+ }
+ else
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 64U;
+ hhash->pHashInBuffPtr+= 64U;
+ }
+ }
+ else
+ {
+ /* Get the buffer address */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Get the buffer counter */
+ inputcounter = hhash->HashInCount;
+ /* Disable Interrupts */
+ HASH->IMR &= ~(HASH_IT_DINI);
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+ if((inputcounter > 4U) && (inputcounter%4U))
+ {
+ inputcounter = (inputcounter+4U-inputcounter%4U);
+ }
+ else if ((inputcounter < 4U) && (inputcounter != 0U))
+ {
+ inputcounter = 4U;
+ }
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < inputcounter/4U; buffercounter++)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Reset buffer counter */
+ hhash->HashInCount = 0U;
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+ * The digest is available in pOutBuffer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+ uint32_t inputaddr;
+ uint32_t buffercounter;
+ uint32_t inputcounter;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ if(hhash->State == HAL_HASH_STATE_READY)
+ {
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ hhash->HashInCount = Size;
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->pHashOutBuffPtr = pOutBuffer;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA256 mode */
+ HASH->CR |= HASH_ALGOSELECTION_SHA256;
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+ /* Reset interrupt counter */
+ hhash->HashITCounter = 0U;
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Enable Interrupts */
+ HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+ {
+ /* Read the message digest */
+ HASHEx_GetDigest(hhash->pHashOutBuffPtr, 32U);
+ if(hhash->HashInCount == 0U)
+ {
+ /* Disable Interrupts */
+ HASH->IMR = 0U;
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_READY;
+ /* Call digest computation complete callback */
+ HAL_HASH_DgstCpltCallback(hhash);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+ if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+ {
+ if(hhash->HashInCount >= 68U)
+ {
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < 64U; buffercounter+=4U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ if(hhash->HashITCounter == 0U)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+
+ if(hhash->HashInCount >= 68U)
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 68U;
+ hhash->pHashInBuffPtr+= 68U;
+ }
+ else
+ {
+ hhash->HashInCount = 0U;
+ hhash->pHashInBuffPtr+= hhash->HashInCount;
+ }
+ /* Set Interrupt counter */
+ hhash->HashITCounter = 1U;
+ }
+ else
+ {
+ /* Decrement buffer counter */
+ hhash->HashInCount -= 64U;
+ hhash->pHashInBuffPtr+= 64U;
+ }
+ }
+ else
+ {
+ /* Get the buffer address */
+ inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+ /* Get the buffer counter */
+ inputcounter = hhash->HashInCount;
+ /* Disable Interrupts */
+ HASH->IMR &= ~(HASH_IT_DINI);
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+ if((inputcounter > 4U) && (inputcounter%4U))
+ {
+ inputcounter = (inputcounter+4U-inputcounter%4U);
+ }
+ else if ((inputcounter < 4U) && (inputcounter != 0U))
+ {
+ inputcounter = 4U;
+ }
+ /* Write the Input block in the Data IN register */
+ for(buffercounter = 0U; buffercounter < inputcounter/4U; buffercounter++)
+ {
+ HASH->DIN = *(uint32_t*)inputaddr;
+ inputaddr+=4U;
+ }
+ /* Start the digest calculation */
+ __HAL_HASH_START_DIGEST();
+ /* Reset buffer counter */
+ hhash->HashInCount = 0U;
+ /* Call Input data transfer complete callback */
+ HAL_HASH_InCpltCallback(hhash);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles HASH interrupt request.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @retval None
+ */
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash)
+{
+ switch(HASH->CR & HASH_CR_ALGO)
+ {
+
+ case HASH_ALGOSELECTION_SHA224:
+ HAL_HASHEx_SHA224_Start_IT(hhash, NULL, 0U, NULL);
+ break;
+
+ case HASH_ALGOSELECTION_SHA256:
+ HAL_HASHEx_SHA256_Start_IT(hhash, NULL, 0U, NULL);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Group4 HASH processing functions using DMA mode
+ * @brief processing functions using DMA mode.
+ *
+@verbatim
+ ===============================================================================
+ ##### HASH processing using DMA functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the hash value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Initializes the HASH peripheral in SHA224 mode then enables DMA to
+ control data transfer. Use HAL_HASH_SHA224_Finish() to get the digest.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = (uint32_t)pInBuffer;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+ }
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4U ? (Size+3U)/4U:Size/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the computed digest in SHA224
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 28U);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in SHA256 mode then enables DMA to
+ control data transfer. Use HAL_HASH_SHA256_Finish() to get the digest.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr = (uint32_t)pInBuffer;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+ }
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(Size);
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4U ? (Size+3U)/4U:Size/4U));
+
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process UnLock */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the computed digest in SHA256.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
+ * @param Timeout: Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Read the message digest */
+ HASHEx_GetDigest(pOutBuffer, 32U);
+
+ /* Change HASH peripheral state */
+ hhash->State = HAL_HASH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @}
+ */
+/** @defgroup HASHEx_Group5 HMAC processing functions using DMA mode
+ * @brief HMAC processing functions using DMA mode .
+ *
+@verbatim
+ ===============================================================================
+ ##### HMAC processing using DMA functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to calculate in DMA mode
+ the HMAC value using one of the following algorithms:
+ (+) SHA224
+ (+) SHA256
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA224 mode
+ * then enables DMA to control data transfer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Save buffer pointer and size in handle */
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->HashBuffSize = Size;
+ hhash->HashInCount = 0U;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA224 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+ }
+ else
+ {
+ /* Select the HMAC SHA224 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+ }
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Get the key address */
+ inputaddr = (uint32_t)(hhash->Init.pKey);
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4U ? (hhash->Init.KeySize+3U)/4U:hhash->Init.KeySize/4U));
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HASH peripheral in HMAC SHA256 mode
+ * then enables DMA to control data transfer.
+ * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
+ * the configuration information for HASH module
+ * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
+ * @param Size: Length of the input buffer in bytes.
+ * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+ uint32_t inputaddr;
+
+ /* Process Locked */
+ __HAL_LOCK(hhash);
+
+ /* Change the HASH state */
+ hhash->State = HAL_HASH_STATE_BUSY;
+
+ /* Save buffer pointer and size in handle */
+ hhash->pHashInBuffPtr = pInBuffer;
+ hhash->HashBuffSize = Size;
+ hhash->HashInCount = 0U;
+
+ /* Check if initialization phase has already been performed */
+ if(hhash->Phase == HAL_HASH_PHASE_READY)
+ {
+ /* Check if key size is greater than 64 bytes */
+ if(hhash->Init.KeySize > 64U)
+ {
+ /* Select the HMAC SHA256 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
+ }
+ else
+ {
+ /* Select the HMAC SHA256 mode */
+ HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
+ }
+ /* Reset the HASH processor core, so that the HASH will be ready to compute
+ the message digest of a new message */
+ HASH->CR |= HASH_CR_INIT;
+ }
+
+ /* Set the phase */
+ hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+ /* Configure the number of valid bits in last word of the message */
+ __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+ /* Get the key address */
+ inputaddr = (uint32_t)(hhash->Init.pKey);
+
+ /* Set the HASH DMA transfer complete callback */
+ hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+ /* Set the DMA error callback */
+ hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4U ? (hhash->Init.KeySize+3U)/4U:hhash->Init.KeySize/4U));
+ /* Enable DMA requests */
+ HASH->CR |= (HASH_CR_DMAE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hhash);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+
+#endif /* HAL_HASH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hash_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,200 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of HASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_EX_H
+#define __STM32F4xx_HAL_HASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASHEx
+ * @brief HASHEx HAL Extension module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASHEx_Exported_Functions HASHEx Exported Functions
+ * @{
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group1 HASHEx processing using polling functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group2 HMAC processing using polling functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group3 HASHEx processing using functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group4 HASHEx processing using DMA
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group5 HMAC processing using DMA
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group6 HASHEx processing functions
+ * @{
+ */
+
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Types HASHEx Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Variables HASHEx Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Constants HASHEx Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Macros HASHEx Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Functions HASHEx Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1227 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hcd.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief HCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#)Declare a HCD_HandleTypeDef handle structure, for example:
+ HCD_HandleTypeDef hhcd;
+
+ (#)Fill parameters of Init structure in HCD handle
+
+ (#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...)
+
+ (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API:
+ (##) Enable the HCD/USB Low Level interface clock using the following macros
+ (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+ (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
+ (+++) __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); (For High Speed Mode)
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure HCD pin-out
+ (##) Configure HCD NVIC interrupt
+
+ (#)Associate the Upper USB Host stack to the HAL HCD Driver:
+ (##) hhcd.pData = phost;
+
+ (#)Enable HCD transmission and reception:
+ (##) HAL_HCD_Start();
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HCD HCD
+ * @brief HCD HAL module driver
+ * @{
+ */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup HCD_Private_Functions HCD Private Functions
+ * @{
+ */
+static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd);
+static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Functions HCD Exported Functions
+ * @{
+ */
+
+/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the host driver.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd)
+{
+ /* Check the HCD handle allocation */
+ if(hhcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance));
+
+ hhcd->State = HAL_HCD_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_HCD_MspInit(hhcd);
+
+ /* Disable the Interrupts */
+ __HAL_HCD_DISABLE(hhcd);
+
+ /* Init the Core (common init.) */
+ USB_CoreInit(hhcd->Instance, hhcd->Init);
+
+ /* Force Host Mode*/
+ USB_SetCurrentMode(hhcd->Instance , USB_OTG_HOST_MODE);
+
+ /* Init Host */
+ USB_HostInit(hhcd->Instance, hhcd->Init);
+
+ hhcd->State= HAL_HCD_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize a host channel.
+ * @param hhcd: HCD handle
+ * @param ch_num: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @param epnum: Endpoint number.
+ * This parameter can be a value from 1 to 15
+ * @param dev_address : Current device address
+ * This parameter can be a value from 0 to 255
+ * @param speed: Current device speed.
+ * This parameter can be one of these values:
+ * HCD_SPEED_HIGH: High speed mode,
+ * HCD_SPEED_FULL: Full speed mode,
+ * HCD_SPEED_LOW: Low speed mode
+ * @param ep_type: Endpoint Type.
+ * This parameter can be one of these values:
+ * EP_TYPE_CTRL: Control type,
+ * EP_TYPE_ISOC: Isochronous type,
+ * EP_TYPE_BULK: Bulk type,
+ * EP_TYPE_INTR: Interrupt type
+ * @param mps: Max Packet Size.
+ * This parameter can be a value from 0 to32K
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ __HAL_LOCK(hhcd);
+
+ hhcd->hc[ch_num].dev_addr = dev_address;
+ hhcd->hc[ch_num].max_packet = mps;
+ hhcd->hc[ch_num].ch_num = ch_num;
+ hhcd->hc[ch_num].ep_type = ep_type;
+ hhcd->hc[ch_num].ep_num = epnum & 0x7FU;
+ hhcd->hc[ch_num].ep_is_in = ((epnum & 0x80U) == 0x80U);
+ hhcd->hc[ch_num].speed = speed;
+
+ status = USB_HC_Init(hhcd->Instance,
+ ch_num,
+ epnum,
+ dev_address,
+ speed,
+ ep_type,
+ mps);
+ __HAL_UNLOCK(hhcd);
+
+ return status;
+}
+
+/**
+ * @brief Halt a host channel.
+ * @param hhcd: HCD handle
+ * @param ch_num: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ __HAL_LOCK(hhcd);
+ USB_HC_Halt(hhcd->Instance, ch_num);
+ __HAL_UNLOCK(hhcd);
+
+ return status;
+}
+
+/**
+ * @brief DeInitialize the host driver.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd)
+{
+ /* Check the HCD handle allocation */
+ if(hhcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hhcd->State = HAL_HCD_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_HCD_MspDeInit(hhcd);
+
+ __HAL_HCD_DISABLE(hhcd);
+
+ hhcd->State = HAL_HCD_STATE_RESET;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the HCD MSP.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the HCD MSP.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Functions_Group2 Input and Output operation functions
+ * @brief HCD IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to manage the USB Host Data
+ Transfer
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Submit a new URB for processing.
+ * @param hhcd: HCD handle
+ * @param ch_num: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @param direction: Channel number.
+ * This parameter can be one of these values:
+ * 0 : Output / 1 : Input
+ * @param ep_type: Endpoint Type.
+ * This parameter can be one of these values:
+ * EP_TYPE_CTRL: Control type/
+ * EP_TYPE_ISOC: Isochronous type/
+ * EP_TYPE_BULK: Bulk type/
+ * EP_TYPE_INTR: Interrupt type/
+ * @param token: Endpoint Type.
+ * This parameter can be one of these values:
+ * 0: HC_PID_SETUP / 1: HC_PID_DATA1
+ * @param pbuff: pointer to URB data
+ * @param length: Length of URB data
+ * @param do_ping: activate do ping protocol (for high speed only).
+ * This parameter can be one of these values:
+ * 0 : do ping inactive / 1 : do ping active
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t direction,
+ uint8_t ep_type,
+ uint8_t token,
+ uint8_t* pbuff,
+ uint16_t length,
+ uint8_t do_ping)
+{
+ hhcd->hc[ch_num].ep_is_in = direction;
+ hhcd->hc[ch_num].ep_type = ep_type;
+
+ if(token == 0U)
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_SETUP;
+ }
+ else
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+
+ /* Manage Data Toggle */
+ switch(ep_type)
+ {
+ case EP_TYPE_CTRL:
+ if((token == 1U) && (direction == 0U)) /*send data */
+ {
+ if (length == 0U)
+ { /* For Status OUT stage, Length==0, Status Out PID = 1 */
+ hhcd->hc[ch_num].toggle_out = 1U;
+ }
+
+ /* Set the Data Toggle bit as per the Flag */
+ if (hhcd->hc[ch_num].toggle_out == 0U)
+ { /* Put the PID 0 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ { /* Put the PID 1 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ if(hhcd->hc[ch_num].urb_state != URB_NOTREADY)
+ {
+ hhcd->hc[ch_num].do_ping = do_ping;
+ }
+ }
+ break;
+
+ case EP_TYPE_BULK:
+ if(direction == 0U)
+ {
+ /* Set the Data Toggle bit as per the Flag */
+ if ( hhcd->hc[ch_num].toggle_out == 0U)
+ { /* Put the PID 0 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ { /* Put the PID 1 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ if(hhcd->hc[ch_num].urb_state != URB_NOTREADY)
+ {
+ hhcd->hc[ch_num].do_ping = do_ping;
+ }
+ }
+ else
+ {
+ if( hhcd->hc[ch_num].toggle_in == 0U)
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ }
+
+ break;
+ case EP_TYPE_INTR:
+ if(direction == 0U)
+ {
+ /* Set the Data Toggle bit as per the Flag */
+ if ( hhcd->hc[ch_num].toggle_out == 0U)
+ { /* Put the PID 0 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ { /* Put the PID 1 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ }
+ else
+ {
+ if( hhcd->hc[ch_num].toggle_in == 0U)
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ }
+ break;
+
+ case EP_TYPE_ISOC:
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ break;
+ }
+
+ hhcd->hc[ch_num].xfer_buff = pbuff;
+ hhcd->hc[ch_num].xfer_len = length;
+ hhcd->hc[ch_num].urb_state = URB_IDLE;
+ hhcd->hc[ch_num].xfer_count = 0U;
+ hhcd->hc[ch_num].ch_num = ch_num;
+ hhcd->hc[ch_num].state = HC_IDLE;
+
+ return USB_HC_StartXfer(hhcd->Instance, &(hhcd->hc[ch_num]), hhcd->Init.dma_enable);
+}
+
+/**
+ * @brief Handle HCD interrupt request.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint32_t i = 0U , interrupt = 0U;
+
+ /* Ensure that we are in device mode */
+ if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST)
+ {
+ /* Avoid spurious interrupt */
+ if(__HAL_HCD_IS_INVALID_INTERRUPT(hhcd))
+ {
+ return;
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+ {
+ /* Incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR))
+ {
+ /* Incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR);
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE))
+ {
+ /* Incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE);
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_MMIS))
+ {
+ /* Incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_MMIS);
+ }
+
+ /* Handle Host Disconnect Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT))
+ {
+
+ /* Cleanup HPRT */
+ USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ /* Handle Host Port Interrupts */
+ HAL_HCD_Disconnect_Callback(hhcd);
+ USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT);
+ }
+
+ /* Handle Host Port Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT))
+ {
+ HCD_Port_IRQHandler (hhcd);
+ }
+
+ /* Handle Host SOF Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_SOF))
+ {
+ HAL_HCD_SOF_Callback(hhcd);
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
+ }
+
+ /* Handle Host channel Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
+ {
+ interrupt = USB_HC_ReadInterrupt(hhcd->Instance);
+ for (i = 0U; i < hhcd->Init.Host_channels; i++)
+ {
+ if (interrupt & (1U << i))
+ {
+ if ((USBx_HC(i)->HCCHAR) & USB_OTG_HCCHAR_EPDIR)
+ {
+ HCD_HC_IN_IRQHandler(hhcd, i);
+ }
+ else
+ {
+ HCD_HC_OUT_IRQHandler (hhcd, i);
+ }
+ }
+ }
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
+ }
+
+ /* Handle Rx Queue Level Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL))
+ {
+ USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+ HCD_RXQLVL_IRQHandler (hhcd);
+
+ USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+ }
+ }
+}
+
+/**
+ * @brief SOF callback.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_SOF_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Connection Event callback.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_Connect_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Disconnection Event callback.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_Disconnect_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Notify URB state change callback.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @param urb_state:
+ * This parameter can be one of these values:
+ * URB_IDLE/
+ * URB_DONE/
+ * URB_NOTREADY/
+ * URB_NYET/
+ * URB_ERROR/
+ * URB_STALL/
+ * @retval None
+ */
+__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hhcd);
+ UNUSED(chnum);
+ UNUSED(urb_state);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_HC_NotifyURBChange_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the HCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start the host driver.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd)
+{
+ __HAL_LOCK(hhcd);
+ __HAL_HCD_ENABLE(hhcd);
+ USB_DriveVbus(hhcd->Instance, 1U);
+ __HAL_UNLOCK(hhcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the host driver.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd)
+{
+ __HAL_LOCK(hhcd);
+ USB_StopHost(hhcd->Instance);
+ __HAL_UNLOCK(hhcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Reset the host port.
+ * @param hhcd: HCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd)
+{
+ return (USB_ResetPort(hhcd->Instance));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the HCD handle state.
+ * @param hhcd: HCD handle
+ * @retval HAL state
+ */
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd)
+{
+ return hhcd->State;
+}
+
+/**
+ * @brief Return URB state for a channel.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval URB state.
+ * This parameter can be one of these values:
+ * URB_IDLE/
+ * URB_DONE/
+ * URB_NOTREADY/
+ * URB_NYET/
+ * URB_ERROR/
+ * URB_STALL
+ */
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ return hhcd->hc[chnum].urb_state;
+}
+
+
+/**
+ * @brief Return the last host transfer size.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval last transfer size in byte
+ */
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ return hhcd->hc[chnum].xfer_count;
+}
+
+/**
+ * @brief Return the Host Channel state.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval Host channel state
+ * This parameter can be one of these values:
+ * HC_IDLE/
+ * HC_XFRC/
+ * HC_HALTED/
+ * HC_NYET/
+ * HC_NAK/
+ * HC_STALL/
+ * HC_XACTERR/
+ * HC_BBLERR/
+ * HC_DATATGLERR
+ */
+HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ return hhcd->hc[chnum].state;
+}
+
+/**
+ * @brief Return the current Host frame number.
+ * @param hhcd: HCD handle
+ * @retval Current Host frame number
+ */
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd)
+{
+ return (USB_GetCurrentFrame(hhcd->Instance));
+}
+
+/**
+ * @brief Return the Host enumeration speed.
+ * @param hhcd: HCD handle
+ * @retval Enumeration speed
+ */
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd)
+{
+ return (USB_GetHostSpeed(hhcd->Instance));
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup HCD_Private_Functions
+ * @{
+ */
+/**
+ * @brief Handle Host Channel IN interrupt requests.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval None
+ */
+static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint32_t tmpreg = 0U;
+
+ if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_AHBERR)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_ACK)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_STALL)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ hhcd->hc[chnum].state = HC_STALL;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_DTERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ hhcd->hc[chnum].state = HC_DATATGLERR;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+ }
+
+ if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_FRMOR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_XFRC)
+ {
+
+ if (hhcd->Init.dma_enable)
+ {
+ hhcd->hc[chnum].xfer_count = hhcd->hc[chnum].xfer_len - \
+ (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ);
+ }
+
+ hhcd->hc[chnum].state = HC_XFRC;
+ hhcd->hc[chnum].ErrCnt = 0U;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+
+
+ if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+ (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+
+ }
+ else if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+ {
+ USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM;
+ hhcd->hc[chnum].urb_state = URB_DONE;
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+ }
+ hhcd->hc[chnum].toggle_in ^= 1U;
+
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_CHH)
+ {
+ __HAL_HCD_MASK_HALT_HC_INT(chnum);
+
+ if(hhcd->hc[chnum].state == HC_XFRC)
+ {
+ hhcd->hc[chnum].urb_state = URB_DONE;
+ }
+
+ else if (hhcd->hc[chnum].state == HC_STALL)
+ {
+ hhcd->hc[chnum].urb_state = URB_STALL;
+ }
+
+ else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+ (hhcd->hc[chnum].state == HC_DATATGLERR))
+ {
+ if(hhcd->hc[chnum].ErrCnt++ > 3U)
+ {
+ hhcd->hc[chnum].ErrCnt = 0U;
+ hhcd->hc[chnum].urb_state = URB_ERROR;
+ }
+ else
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+
+ /* re-activate the channel */
+ tmpreg = USBx_HC(chnum)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(chnum)->HCCHAR = tmpreg;
+ }
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_TXERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ hhcd->hc[chnum].ErrCnt++;
+ hhcd->hc[chnum].state = HC_XACTERR;
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NAK)
+ {
+ if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ }
+ else if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+ (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+ {
+ /* re-activate the channel */
+ tmpreg = USBx_HC(chnum)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(chnum)->HCCHAR = tmpreg;
+ }
+ hhcd->hc[chnum].state = HC_NAK;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ }
+}
+
+/**
+ * @brief Handle Host Channel OUT interrupt requests.
+ * @param hhcd: HCD handle
+ * @param chnum: Channel number.
+ * This parameter can be a value from 1 to 15
+ * @retval None
+ */
+static void HCD_HC_OUT_IRQHandler (HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint32_t tmpreg = 0U;
+
+ if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_AHBERR)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_ACK)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+
+ if( hhcd->hc[chnum].do_ping == 1U)
+ {
+ hhcd->hc[chnum].state = HC_NYET;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NYET)
+ {
+ hhcd->hc[chnum].state = HC_NYET;
+ hhcd->hc[chnum].ErrCnt= 0U;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET);
+
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_FRMOR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_XFRC)
+ {
+ hhcd->hc[chnum].ErrCnt = 0U;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+ hhcd->hc[chnum].state = HC_XFRC;
+
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_STALL)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].state = HC_STALL;
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NAK)
+ {
+ hhcd->hc[chnum].ErrCnt = 0U;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].state = HC_NAK;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_TXERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].state = HC_XACTERR;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_DTERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+ hhcd->hc[chnum].state = HC_DATATGLERR;
+ }
+
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_CHH)
+ {
+ __HAL_HCD_MASK_HALT_HC_INT(chnum);
+
+ if(hhcd->hc[chnum].state == HC_XFRC)
+ {
+ hhcd->hc[chnum].urb_state = URB_DONE;
+ if (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)
+ {
+ hhcd->hc[chnum].toggle_out ^= 1U;
+ }
+ }
+ else if (hhcd->hc[chnum].state == HC_NAK)
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+
+ else if (hhcd->hc[chnum].state == HC_NYET)
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ hhcd->hc[chnum].do_ping = 0U;
+ }
+
+ else if (hhcd->hc[chnum].state == HC_STALL)
+ {
+ hhcd->hc[chnum].urb_state = URB_STALL;
+ }
+
+ else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+ (hhcd->hc[chnum].state == HC_DATATGLERR))
+ {
+ if(hhcd->hc[chnum].ErrCnt++ > 3U)
+ {
+ hhcd->hc[chnum].ErrCnt = 0U;
+ hhcd->hc[chnum].urb_state = URB_ERROR;
+ }
+ else
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+
+ /* re-activate the channel */
+ tmpreg = USBx_HC(chnum)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(chnum)->HCCHAR = tmpreg;
+ }
+
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+ }
+}
+
+/**
+ * @brief Handle Rx Queue Level interrupt requests.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint8_t channelnum = 0U;
+ uint32_t pktsts;
+ uint32_t pktcnt;
+ uint32_t temp = 0U;
+ uint32_t tmpreg = 0U;
+
+ temp = hhcd->Instance->GRXSTSP;
+ channelnum = temp & USB_OTG_GRXSTSP_EPNUM;
+ pktsts = (temp & USB_OTG_GRXSTSP_PKTSTS) >> 17U;
+ pktcnt = (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+
+ switch (pktsts)
+ {
+ case GRXSTS_PKTSTS_IN:
+ /* Read the data into the host buffer. */
+ if ((pktcnt > 0U) && (hhcd->hc[channelnum].xfer_buff != (void *)0U))
+ {
+
+ USB_ReadPacket(hhcd->Instance, hhcd->hc[channelnum].xfer_buff, pktcnt);
+
+ /*manage multiple Xfer */
+ hhcd->hc[channelnum].xfer_buff += pktcnt;
+ hhcd->hc[channelnum].xfer_count += pktcnt;
+
+ if((USBx_HC(channelnum)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) > 0U)
+ {
+ /* re-activate the channel when more packets are expected */
+ tmpreg = USBx_HC(channelnum)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(channelnum)->HCCHAR = tmpreg;
+ hhcd->hc[channelnum].toggle_in ^= 1U;
+ }
+ }
+ break;
+
+ case GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
+ break;
+ case GRXSTS_PKTSTS_IN_XFER_COMP:
+ case GRXSTS_PKTSTS_CH_HALTED:
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Handle Host Port interrupt requests.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+static void HCD_Port_IRQHandler (HCD_HandleTypeDef *hhcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ __IO uint32_t hprt0, hprt0_dup;
+
+ /* Handle Host Port Interrupts */
+ hprt0 = USBx_HPRT0;
+ hprt0_dup = USBx_HPRT0;
+
+ hprt0_dup &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ /* Check whether Port Connect Detected */
+ if((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET)
+ {
+ if((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS)
+ {
+ USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
+ HAL_HCD_Connect_Callback(hhcd);
+ }
+ hprt0_dup |= USB_OTG_HPRT_PCDET;
+
+ }
+
+ /* Check whether Port Enable Changed */
+ if((hprt0 & USB_OTG_HPRT_PENCHNG) == USB_OTG_HPRT_PENCHNG)
+ {
+ hprt0_dup |= USB_OTG_HPRT_PENCHNG;
+
+ if((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA)
+ {
+ if(hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY)
+ {
+ if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17U))
+ {
+ USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_6_MHZ );
+ }
+ else
+ {
+ USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
+ }
+ }
+ else
+ {
+ if(hhcd->Init.speed == HCD_SPEED_FULL)
+ {
+ USBx_HOST->HFIR = (uint32_t)60000U;
+ }
+ }
+
+ HAL_HCD_Connect_Callback(hhcd);
+ }
+ else
+ {
+ /* Clean up HPRT */
+ USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
+ }
+ }
+
+ /* Check for an over current */
+ if((hprt0 & USB_OTG_HPRT_POCCHNG) == USB_OTG_HPRT_POCCHNG)
+ {
+ hprt0_dup |= USB_OTG_HPRT_POCCHNG;
+ }
+
+ /* Clear Port Interrupts */
+ USBx_HPRT0 = hprt0_dup;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* HAL_HCD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_hcd.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,262 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hcd.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of HCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HCD_H
+#define __STM32F4xx_HAL_HCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Types HCD Exported Types
+ * @{
+ */
+
+/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition
+ * @{
+ */
+typedef enum
+{
+ HAL_HCD_STATE_RESET = 0x00U,
+ HAL_HCD_STATE_READY = 0x01U,
+ HAL_HCD_STATE_ERROR = 0x02U,
+ HAL_HCD_STATE_BUSY = 0x03U,
+ HAL_HCD_STATE_TIMEOUT = 0x04U
+} HCD_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef HCD_TypeDef;
+typedef USB_OTG_CfgTypeDef HCD_InitTypeDef;
+typedef USB_OTG_HCTypeDef HCD_HCTypeDef ;
+typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef ;
+typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef ;
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition
+ * @{
+ */
+typedef struct
+{
+ HCD_TypeDef *Instance; /*!< Register base address */
+ HCD_InitTypeDef Init; /*!< HCD required parameters */
+ HCD_HCTypeDef hc[15]; /*!< Host channels parameters */
+ HAL_LockTypeDef Lock; /*!< HCD peripheral status */
+ __IO HCD_StateTypeDef State; /*!< HCD communication state */
+ void *pData; /*!< Pointer Stack Handler */
+} HCD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Constants HCD Exported Constants
+ * @{
+ */
+
+/** @defgroup HCD_Speed HCD Speed
+ * @{
+ */
+#define HCD_SPEED_HIGH 0U
+#define HCD_SPEED_LOW 2U
+#define HCD_SPEED_FULL 3U
+/**
+ * @}
+ */
+
+/** @defgroup HCD_PHY_Module HCD PHY Module
+ * @{
+ */
+#define HCD_PHY_ULPI 1U
+#define HCD_PHY_EMBEDDED 2U
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Macros HCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_HCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_HCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
+#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
+#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HCD_Exported_Functions HCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num);
+
+void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/** @addtogroup HCD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+ uint8_t pipe,
+ uint8_t direction,
+ uint8_t ep_type,
+ uint8_t token,
+ uint8_t* pbuff,
+ uint16_t length,
+ uint8_t do_ping);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd,
+ uint8_t chnum,
+ HCD_URBStateTypeDef urb_state);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HCD_Private_Macros HCD Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,5314 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief I2C HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (I2C) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The I2C HAL driver can be used as follows:
+
+ (#) Declare a I2C_HandleTypeDef handle structure, for example:
+ I2C_HandleTypeDef hi2c;
+
+ (#)Initialize the I2C low level resources by implement the HAL_I2C_MspInit() API:
+ (##) Enable the I2Cx interface clock
+ (##) I2C pins configuration
+ (+++) Enable the clock for the I2C GPIOs
+ (+++) Configure I2C pins as alternate function open-drain
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the I2Cx interrupt priority
+ (+++) Enable the NVIC I2C IRQ Channel
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx Stream
+ (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+ the DMA Tx or Rx Stream
+
+ (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1,
+ Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure.
+
+ (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware
+ (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
+
+ (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
+ (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
+ (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
+ (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
+
+ *** Polling mode IO MEM operation ***
+ =====================================
+ [..]
+ (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
+ (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
+
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master mode an amount of data in non blocking mode using HAL_I2C_Master_Transmit_IT()
+ (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+ (+) Receive in master mode an amount of data in non blocking mode using HAL_I2C_Master_Receive_IT()
+ (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+ (+) Transmit in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Transmit_IT()
+ (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+ (+) Receive in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Receive_IT()
+ (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+ *** Interrupt mode IO sequential operation ***
+ ==============================================
+ [..]
+ (+@) These interfaces allow to manage a sequential transfer with a repeated start condition
+ when a direction change during transfer
+ (+) A specific option manage the different steps of a sequential transfer
+ (+) Differents steps option I2C_XferOptions_definition are listed below :
+ (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode
+ (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a start condition with data to transfer without a final stop condition
+ (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a restart condition with new data to transfer if the direction change or
+ manage only the new data to transfer if no direction change and without a final stop condition in both cases
+ (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a restart condition with new data to transfer if the direction change or
+ manage only the new data to transfer if no direction change and with a final stop condition in both cases
+
+ (+) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Transmit_IT()
+ (++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Receive_IT()
+ (++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (++) The associated previous transfer callback is called at the end of abort process
+ (++) mean HAL_I2C_MasterTxCpltCallback() in case of previous state was master transmit
+ (++) mean HAL_I2c_MasterRxCpltCallback() in case of previous state was master receive
+ (+) Enable/disable the Address listen mode in slave I2C mode
+ using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT()
+ (++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can
+ add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
+ (++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ListenCpltCallback()
+ (+) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Transmit_IT()
+ (++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Receive_IT()
+ (++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+
+
+ *** Interrupt mode IO MEM operation ***
+ =======================================
+ [..]
+ (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using
+ HAL_I2C_Mem_Write_IT()
+ (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+ (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using
+ HAL_I2C_Mem_Read_IT()
+ (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Transmit in master mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Master_Transmit_DMA()
+ (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+ (+) Receive in master mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Master_Receive_DMA()
+ (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+ (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Slave_Transmit_DMA()
+ (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+ (+) Receive in slave mode an amount of data in non blocking mode (DMA) using
+ HAL_I2C_Slave_Receive_DMA()
+ (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+ *** DMA mode IO MEM operation ***
+ =================================
+ [..]
+ (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using
+ HAL_I2C_Mem_Write_DMA()
+ (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+ (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using
+ HAL_I2C_Mem_Read_DMA()
+ (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+
+ *** I2C HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in I2C HAL driver.
+
+ (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
+ (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
+ (+) __HAL_I2C_GET_FLAG: Checks whether the specified I2C flag is set or not
+ (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag
+ (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
+ (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
+
+ [..]
+ (@) You can refer to the I2C HAL driver header file for more useful macros
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2C I2C
+ * @brief I2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup I2C_Private_Constants
+ * @{
+ */
+#define I2C_TIMEOUT_FLAG ((uint32_t)35U) /*!< Timeout 35 ms */
+#define I2C_TIMEOUT_ADDR_SLAVE ((uint32_t)10000U) /*!< Timeout 10 s */
+#define I2C_TIMEOUT_BUSY_FLAG ((uint32_t)25U) /*!< Timeout 25 ms */
+#define I2C_NO_OPTION_FRAME ((uint32_t)0xFFFF0000U) /*!< XferOptions default value */
+
+/* Private define for @ref PreviousState usage */
+#define I2C_STATE_MSK ((uint32_t)((HAL_I2C_STATE_BUSY_TX | HAL_I2C_STATE_BUSY_RX) & (~(uint32_t)HAL_I2C_STATE_READY))) /*!< Mask State define, keep only RX and TX bits */
+#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */
+#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup I2C_Private_Functions
+ * @{
+ */
+/* Private functions to handle DMA transfer */
+static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma);
+
+static void I2C_ITError(I2C_HandleTypeDef *hi2c);
+
+static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c);
+
+/* Private functions for I2C transfer IRQ handler */
+static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Master_SB(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Master_ADD10(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Master_ADDR(I2C_HandleTypeDef *hi2c);
+
+static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the I2Cx peripheral:
+
+ (+) User must Implement HAL_I2C_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC).
+
+ (+) Call the function HAL_I2C_Init() to configure the selected device with
+ the selected configuration:
+ (++) Communication Speed
+ (++) Duty cycle
+ (++) Addressing mode
+ (++) Own Address 1
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) General call mode
+ (++) Nostretch mode
+
+ (+) Call the function HAL_I2C_DeInit() to restore the default configuration
+ of the selected I2Cx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2C according to the specified parameters
+ * in the I2C_InitTypeDef and create the associated handle.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t freqrange = 0U;
+ uint32_t pclk1 = 0U;
+
+ /* Check the I2C handle allocation */
+ if(hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_CLOCK_SPEED(hi2c->Init.ClockSpeed));
+ assert_param(IS_I2C_DUTY_CYCLE(hi2c->Init.DutyCycle));
+ assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+ assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+ assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+ assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+ assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+ assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+ if(hi2c->State == HAL_I2C_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2c->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_I2C_MspInit(hi2c);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Get PCLK1 frequency */
+ pclk1 = HAL_RCC_GetPCLK1Freq();
+
+ /* Calculate frequency range */
+ freqrange = I2C_FREQRANGE(pclk1);
+
+ /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+ /* Configure I2Cx: Frequency range */
+ hi2c->Instance->CR2 = freqrange;
+
+ /*---------------------------- I2Cx TRISE Configuration --------------------*/
+ /* Configure I2Cx: Rise Time */
+ hi2c->Instance->TRISE = I2C_RISE_TIME(freqrange, hi2c->Init.ClockSpeed);
+
+ /*---------------------------- I2Cx CCR Configuration ----------------------*/
+ /* Configure I2Cx: Speed */
+ hi2c->Instance->CCR = I2C_SPEED(pclk1, hi2c->Init.ClockSpeed, hi2c->Init.DutyCycle);
+
+ /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+ /* Configure I2Cx: Generalcall and NoStretch mode */
+ hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+
+ /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+ /* Configure I2Cx: Own Address1 and addressing mode */
+ hi2c->Instance->OAR1 = (hi2c->Init.AddressingMode | hi2c->Init.OwnAddress1);
+
+ /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+ /* Configure I2Cx: Dual mode and Own Address2 */
+ hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2);
+
+ /* Enable the selected I2C peripheral */
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the I2C peripheral.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if(hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the I2C Peripheral Clock */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_I2C_MspDeInit(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_RESET;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2C MSP Init.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+ __weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C MSP DeInit
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+ __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2C_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2C data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2C_Master_Transmit()
+ (++) HAL_I2C_Master_Receive()
+ (++) HAL_I2C_Slave_Transmit()
+ (++) HAL_I2C_Slave_Receive()
+ (++) HAL_I2C_Mem_Write()
+ (++) HAL_I2C_Mem_Read()
+ (++) HAL_I2C_IsDeviceReady()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2C_Master_Transmit_IT()
+ (++) HAL_I2C_Master_Receive_IT()
+ (++) HAL_I2C_Slave_Transmit_IT()
+ (++) HAL_I2C_Slave_Receive_IT()
+ (++) HAL_I2C_Master_Sequential_Transmit_IT()
+ (++) HAL_I2C_Master_Sequential_Receive_IT()
+ (++) HAL_I2C_Slave_Sequential_Transmit_IT()
+ (++) HAL_I2C_Slave_Sequential_Receive_IT()
+ (++) HAL_I2C_Mem_Write_IT()
+ (++) HAL_I2C_Mem_Read_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2C_Master_Transmit_DMA()
+ (++) HAL_I2C_Master_Receive_DMA()
+ (++) HAL_I2C_Slave_Transmit_DMA()
+ (++) HAL_I2C_Slave_Receive_DMA()
+ (++) HAL_I2C_Mem_Write_DMA()
+ (++) HAL_I2C_Mem_Read_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2C_MemTxCpltCallback()
+ (++) HAL_I2C_MemRxCpltCallback()
+ (++) HAL_I2C_MasterTxCpltCallback()
+ (++) HAL_I2C_MasterRxCpltCallback()
+ (++) HAL_I2C_SlaveTxCpltCallback()
+ (++) HAL_I2C_SlaveRxCpltCallback()
+ (++) HAL_I2C_ErrorCallback()
+ (++) HAL_I2C_AbortCpltCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Send Slave Address */
+ if(I2C_MasterRequestWrite(hi2c, DevAddress, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ while(Size > 0U)
+ {
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0U))
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+ }
+
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Send Slave Address */
+ if(I2C_MasterRequestRead(hi2c, DevAddress, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ if(Size == 0U)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(Size == 1U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(Size == 2U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Enable Pos */
+ hi2c->Instance->CR1 |= I2C_CR1_POS;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ while(Size > 0U)
+ {
+ if(Size <= 3U)
+ {
+ /* One byte */
+ if(Size == 1U)
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ /* Two bytes */
+ else if(Size == 2U)
+ {
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ /* 3 Last bytes */
+ else
+ {
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+ else
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET)
+ {
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+ }
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmits in slave mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* If 10bit addressing mode is selected */
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ while(Size > 0U)
+ {
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0U))
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+ }
+ }
+
+ /* Wait until AF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in blocking mode
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ while(Size > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0U))
+ {
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+
+ /* Wait until STOP flag is set */
+ if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_STOPFLAG(hi2c);
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->Devaddress = DevAddress;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->Devaddress = DevAddress;
+
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in master mode an amount of data in no-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t Prev_State = 0x00U;
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Check Busy Flag only if FIRST call of Master interface */
+ if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->Devaddress = DevAddress;
+
+ Prev_State = hi2c->PreviousState;
+
+ /* Generate Start */
+ if((Prev_State == I2C_STATE_MASTER_BUSY_RX) || (Prev_State == I2C_STATE_NONE))
+ {
+ /* Generate Start condition if first transfer */
+ if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(Prev_State == I2C_STATE_MASTER_BUSY_RX)
+ {
+ /* Generate ReStart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in master mode an amount of data in no-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t Prev_State = 0x00U;
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Check Busy Flag only if FIRST call of Master interface */
+ if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->Devaddress = DevAddress;
+
+ Prev_State = hi2c->PreviousState;
+
+ if((Prev_State == I2C_STATE_MASTER_BUSY_TX) || (Prev_State == I2C_STATE_NONE))
+ {
+ /* Generate Start condition if first transfer */
+ if((XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_NO_OPTION_FRAME))
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(Prev_State == I2C_STATE_MASTER_BUSY_TX)
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate ReStart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in no-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in slave mode an amount of data in no-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in slave mode an amount of data in no-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if(hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Enable EVT and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of tmp to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+
+ /* Disable Address listen mode only if a transfer is not ongoing */
+ if(hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Disable EVT and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in no-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0x00U;
+
+ __IO uint32_t count = 0U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferM1CpltCallback = NULL;
+ hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
+
+ /* Send Slave Address */
+ if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+ }
+ else
+ {
+ /* Send Slave Address */
+ if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in no-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0x00U;
+
+ __IO uint32_t count = 0U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferM1CpltCallback = NULL;
+ hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
+
+ /* Send Slave Address */
+ if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ if(Size == 1U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Last DMA bit */
+ hi2c->Instance->CR2 |= I2C_CR2_LAST;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+ }
+ else
+ {
+ /* Send Slave Address */
+ if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Abort a master I2C process communication with Interrupt.
+ * @note This abort can be called only if state is ready
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress)
+{
+ /* Abort Master transfer during Receive or Transmit process */
+ if(hi2c->Mode == HAL_I2C_MODE_MASTER)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_ABORT;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->XferCount = 0U;
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ if(hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Call the Abort Complete callback */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wrong usage of abort function */
+ /* This function should be used only in case of abort monitored by master device */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in no-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferM1CpltCallback = NULL;
+ hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
+
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Wait until ADDR flag is set */
+ count = I2C_TIMEOUT_ADDR_SLAVE * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == RESET);
+
+ /* If 7bit addressing mode is selected */
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Wait until ADDR flag is set */
+ count = I2C_TIMEOUT_ADDR_SLAVE * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == RESET);
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in no-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferM1CpltCallback = NULL;
+ hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
+
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Wait until ADDR flag is set */
+ count = I2C_TIMEOUT_ADDR_SLAVE * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == RESET);
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in blocking mode to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ while(Size > 0U)
+ {
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+
+ if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*pData++);
+ Size--;
+ }
+ }
+
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in blocking mode from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ if(Size == 0U)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(Size == 1U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(Size == 2U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Enable Pos */
+ hi2c->Instance->CR1 |= I2C_CR1_POS;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ while(Size > 0U)
+ {
+ if(Size <= 3U)
+ {
+ /* One byte */
+ if(Size== 1U)
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ /* Two bytes */
+ else if(Size == 2U)
+ {
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ /* 3 Last bytes */
+ else
+ {
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Wait until BTF flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+ else
+ {
+ /* Wait until RXNE flag is set */
+ if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET)
+ {
+ /* Read data from DR */
+ (*pData++) = hi2c->Instance->DR;
+ Size--;
+ }
+ }
+ }
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Write an amount of data in no-blocking mode with Interrupt to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->Devaddress = DevAddress;
+ hi2c->Memaddress = MemAddress;
+ hi2c->MemaddSize = MemAddSize;
+ hi2c->EventCount = 0U;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in no-blocking mode with Interrupt from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->Devaddress = DevAddress;
+ hi2c->Memaddress = MemAddress;
+ hi2c->MemaddSize = MemAddSize;
+ hi2c->EventCount = 0U;
+
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable EVT, BUF and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Write an amount of data in no-blocking mode with DMA to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferM1CpltCallback = NULL;
+ hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+ }
+ else
+ {
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads an amount of data in no-blocking mode with DMA from a specific memory address.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0x00U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ __IO uint32_t count = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock /25U /1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ hi2c->pBuffPtr = pData;
+ hi2c->XferSize = Size;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if(hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferM1CpltCallback = NULL;
+ hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
+
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ if(Size == 1U)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Last DMA bit */
+ hi2c->Instance->CR2 |= I2C_CR2_LAST;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+ }
+ else
+ {
+ /* Send Slave Address and Memory Address */
+ if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param Trials Number of trials
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U, tmp1 = 0U, tmp2 = 0U, tmp3 = 0U, I2C_Trials = 1U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Pos */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ do
+ {
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+
+ /* Wait until ADDR or AF flag are set */
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
+ tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
+ tmp3 = hi2c->State;
+ while((tmp1 == RESET) && (tmp2 == RESET) && (tmp3 != HAL_I2C_STATE_TIMEOUT))
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_TIMEOUT;
+ }
+ tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
+ tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
+ tmp3 = hi2c->State;
+ }
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Check if the ADDR flag has been set */
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Clear ADDR Flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Clear AF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Wait until BUSY flag is reset */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }while(I2C_Trials++ < Trials);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles I2C event interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t sr2itflags = READ_REG(hi2c->Instance->SR2);
+ uint32_t sr1itflags = READ_REG(hi2c->Instance->SR1);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR2);
+
+ uint32_t CurrentMode = hi2c->Mode;
+
+ /* Master or Memory mode selected */
+ if((CurrentMode == HAL_I2C_MODE_MASTER) || (CurrentMode == HAL_I2C_MODE_MEM))
+ {
+ /* SB Set ----------------------------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_SB) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Master_SB(hi2c);
+ }
+ /* ADD10 Set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_ADD10) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Master_ADD10(hi2c);
+ }
+ /* ADDR Set --------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_ADDR) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Master_ADDR(hi2c);
+ }
+
+ /* I2C in mode Transmitter -----------------------------------------------*/
+ if((sr2itflags & I2C_FLAG_TRA) != RESET)
+ {
+ /* TXE set and BTF reset -----------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_TXE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET))
+ {
+ I2C_MasterTransmit_TXE(hi2c);
+ }
+ /* BTF set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_MasterTransmit_BTF(hi2c);
+ }
+ }
+ /* I2C in mode Receiver --------------------------------------------------*/
+ else
+ {
+ /* RXNE set and BTF reset -----------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_RXNE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET))
+ {
+ I2C_MasterReceive_RXNE(hi2c);
+ }
+ /* BTF set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_MasterReceive_BTF(hi2c);
+ }
+ }
+ }
+ /* Slave mode selected */
+ else
+ {
+ /* ADDR set --------------------------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_ADDR) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Slave_ADDR(hi2c);
+ }
+ /* STOPF set --------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_STOPF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_Slave_STOPF(hi2c);
+ }
+ /* I2C in mode Transmitter -----------------------------------------------*/
+ else if((sr2itflags & I2C_FLAG_TRA) != RESET)
+ {
+ /* TXE set and BTF reset -----------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_TXE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET))
+ {
+ I2C_SlaveTransmit_TXE(hi2c);
+ }
+ /* BTF set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_SlaveTransmit_BTF(hi2c);
+ }
+ }
+ /* I2C in mode Receiver --------------------------------------------------*/
+ else
+ {
+ /* RXNE set and BTF reset ----------------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_RXNE) != RESET) && ((itsources & I2C_IT_BUF) != RESET) && ((sr1itflags & I2C_FLAG_BTF) == RESET))
+ {
+ I2C_SlaveReceive_RXNE(hi2c);
+ }
+ /* BTF set -------------------------------------------------------------*/
+ else if(((sr1itflags & I2C_FLAG_BTF) != RESET) && ((itsources & I2C_IT_EVT) != RESET))
+ {
+ I2C_SlaveReceive_BTF(hi2c);
+ }
+ }
+ }
+}
+
+/**
+ * @brief This function handles I2C error interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U, tmp3 = 0U, tmp4 = 0U;
+ uint32_t sr1itflags = READ_REG(hi2c->Instance->SR1);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR2);
+
+ /* I2C Bus error interrupt occurred ----------------------------------------*/
+ if(((sr1itflags & I2C_FLAG_BERR) != RESET) && ((itsources & I2C_IT_ERR) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+ }
+
+ /* I2C Arbitration Loss error interrupt occurred ---------------------------*/
+ if(((sr1itflags & I2C_FLAG_ARLO) != RESET) && ((itsources & I2C_IT_ERR) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+ }
+
+ /* I2C Acknowledge failure error interrupt occurred ------------------------*/
+ if(((sr1itflags & I2C_FLAG_AF) != RESET) && ((itsources & I2C_IT_ERR) != RESET))
+ {
+ tmp1 = hi2c->Mode;
+ tmp2 = hi2c->XferCount;
+ tmp3 = hi2c->State;
+ tmp4 = hi2c->PreviousState;
+ if((tmp1 == HAL_I2C_MODE_SLAVE) && (tmp2 == 0U) && \
+ ((tmp3 == HAL_I2C_STATE_BUSY_TX) || (tmp3 == HAL_I2C_STATE_BUSY_TX_LISTEN) || \
+ ((tmp3 == HAL_I2C_STATE_LISTEN) && (tmp4 == I2C_STATE_SLAVE_BUSY_TX))))
+ {
+ I2C_Slave_AF(hi2c);
+ }
+ else
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* Generate Stop */
+ SET_BIT(hi2c->Instance->CR1,I2C_CR1_STOP);
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ }
+ }
+
+ /* I2C Over-Run/Under-Run interrupt occurred -------------------------------*/
+ if(((sr1itflags & I2C_FLAG_OVR) != RESET) && ((itsources & I2C_IT_ERR) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+ /* Clear OVR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+ }
+
+ /* Call the Error Callback in case of Error detected -----------------------*/
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ I2C_ITError(hi2c);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterTxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterRxCpltCallback can be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveTxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveRxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Address Match callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XferOptions_definition
+ * @param AddrMatchCode Address Match Code
+ * @retval None
+ */
+__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ UNUSED(TransferDirection);
+ UNUSED(AddrMatchCode);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AddrCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Listen Complete callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ListenCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Tx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemTxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Rx Transfer completed callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemRxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C error callbacks.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval None
+ */
+__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C abort callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State, Mode and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the I2C state.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL state
+ */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->State;
+}
+
+/**
+ * @brief Returns the I2C Master, Slave, Memory or no mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL mode
+ */
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->Mode;
+}
+
+/**
+ * @brief Return the I2C error code
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval I2C Error Code
+ */
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Handle TXE flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+ uint32_t CurrentMode = hi2c->Mode;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+ uint32_t tmp;
+
+ if((hi2c->XferSize == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX))
+ {
+ /* Call TxCpltCallback() directly if no stop mode is set */
+ if((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME))
+ {
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ else /* Generate Stop condition then Call TxCpltCallback() */
+ {
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+ }
+ else if((CurrentState == HAL_I2C_STATE_BUSY_TX) || \
+ ((CurrentMode == HAL_I2C_MODE_MEM) && (CurrentState == HAL_I2C_STATE_BUSY_RX)))
+ {
+ if(hi2c->XferCount == 0U)
+ {
+ /* Disable BUF interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+ }
+ else
+ {
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ if(hi2c->EventCount == 0)
+ {
+ /* If Memory address size is 8Bit */
+ if(hi2c->MemaddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(hi2c->Memaddress);
+
+ hi2c->EventCount += 2;
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_MSB(hi2c->Memaddress);
+
+ hi2c->EventCount++;
+ }
+ }
+ else if(hi2c->EventCount == 1)
+ {
+ /* Send LSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(hi2c->Memaddress);
+
+ hi2c->EventCount++;
+ }
+ else if(hi2c->EventCount == 2)
+ {
+ if(hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ /* Generate Restart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+ }
+ }
+ else
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle BTF flag for Master transmitter
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+
+ if(hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ if(hi2c->XferCount != 0U)
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+ else
+ {
+ /* Call TxCpltCallback() directly if no stop mode is set */
+ if((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME))
+ {
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ else /* Generate Stop condition then Call TxCpltCallback() */
+ {
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle RXNE flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ uint32_t tmp = 0U;
+
+ tmp = hi2c->XferCount;
+ if(tmp > 3U)
+ {
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+ }
+ else if((tmp == 2U) || (tmp == 3U))
+ {
+ if(hi2c->XferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Enable Pos */
+ hi2c->Instance->CR1 |= I2C_CR1_POS;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+ /* Disable BUF interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+ }
+ else
+ {
+ if(hi2c->XferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle BTF flag for Master receiver
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+
+ if(hi2c->XferCount == 3U)
+ {
+ if((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME))
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+ }
+ else if(hi2c->XferCount == 2U)
+ {
+ /* Prepare next transfer or stop current transfer */
+ if((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME))
+ {
+ if(CurrentXferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ }
+ else
+ {
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+
+ /* Disable EVT and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+ else
+ {
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle SB flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+
+static HAL_StatusTypeDef I2C_Master_SB(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ if(hi2c->EventCount == 0U)
+ {
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress);
+ }
+ else
+ {
+ hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress);
+ }
+ }
+ else
+ {
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ /* Send slave 7 Bits address */
+ if(hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress);
+ }
+ else
+ {
+ hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress);
+ }
+ }
+ else
+ {
+ if(hi2c->EventCount == 0U)
+ {
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(hi2c->Devaddress);
+ }
+ else if(hi2c->EventCount == 1U)
+ {
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_READ(hi2c->Devaddress);
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle ADD10 flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ADD10(I2C_HandleTypeDef *hi2c)
+{
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_10BIT_ADDRESS(hi2c->Devaddress);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle ADDR flag for Master
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ADDR(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentMode = hi2c->Mode;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+ uint32_t Prev_State = hi2c->PreviousState;
+
+ if(hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ if((hi2c->EventCount == 0U) && (CurrentMode == HAL_I2C_MODE_MEM))
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else if((hi2c->EventCount == 0U) && (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT))
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Restart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ hi2c->EventCount++;
+ }
+ else
+ {
+ if(hi2c->XferCount == 0U)
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ else if(hi2c->XferCount == 1U)
+ {
+ /* Prepare next transfer or stop current transfer */
+ if((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) \
+ && (Prev_State != I2C_STATE_MASTER_BUSY_RX))
+ {
+ if(hi2c->XferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ }
+ }
+ else if(hi2c->XferCount == 2U)
+ {
+ if(hi2c->XferOptions != I2C_NEXT_FRAME)
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Enable Pos */
+ hi2c->Instance->CR1 |= I2C_CR1_POS;
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+ else
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ /* Reset Event counter */
+ hi2c->EventCount = 0;
+ }
+ }
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle TXE flag for Slave
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+ uint32_t CurrentState = hi2c->State;
+
+ if(hi2c->XferCount != 0U)
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+
+ if((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN))
+ {
+ /* Last Byte is received, disable Interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+
+ /* Set state at HAL_I2C_STATE_LISTEN */
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+
+ /* Call the Tx complete callback to inform upper layer of the end of receive process */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle BTF flag for Slave transmitter
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->XferCount != 0U)
+ {
+ /* Write data to DR */
+ hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle RXNE flag for Slave
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+ uint32_t CurrentState = hi2c->State;
+
+ if(hi2c->XferCount != 0U)
+ {
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+
+ if((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* Last Byte is received, disable Interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+
+ /* Set state at HAL_I2C_STATE_LISTEN */
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+
+ /* Call the Rx complete callback to inform upper layer of the end of receive process */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle BTF flag for Slave receiver
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c)
+{
+ if(hi2c->XferCount != 0U)
+ {
+ /* Read data from DR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+ hi2c->XferCount--;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle ADD flag for Slave
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c)
+{
+ uint8_t TransferDirection = I2C_DIRECTION_RECEIVE;
+ uint16_t SlaveAddrCode = 0U;
+
+ /* Transfer Direction requested by Master */
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA) == RESET)
+ {
+ TransferDirection = I2C_DIRECTION_TRANSMIT;
+ }
+
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_DUALF) == RESET)
+ {
+ SlaveAddrCode = hi2c->Init.OwnAddress1;
+ }
+ else
+ {
+ SlaveAddrCode = hi2c->Init.OwnAddress2;
+ }
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, TransferDirection, SlaveAddrCode);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle STOPF flag for Slave
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Clear STOPF flag */
+ __HAL_I2C_CLEAR_STOPFLAG(hi2c);
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ if((CurrentState == HAL_I2C_STATE_LISTEN ) || (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN) || \
+ (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN))
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+ else
+ {
+ if((hi2c->PreviousState == I2C_STATE_SLAVE_BUSY_RX) || (CurrentState == HAL_I2C_STATE_BUSY_RX))
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variables to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+ uint32_t tmp;
+
+ if(((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME)) && \
+ (CurrentState == HAL_I2C_STATE_LISTEN))
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+ else if(CurrentState == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Disable EVT, BUF and ERR interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Clear AF flag only */
+ /* State Listen, but XferOptions == FIRST or NEXT */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2C interrupts error process
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITError(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+
+ if((CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN) || (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* keep HAL_I2C_STATE_LISTEN */
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ }
+ else
+ {
+ /* If state is an abort treatment on going, don't change state */
+ /* This change will be do later */
+ if(hi2c->State != HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ }
+
+ /* Disable Pos bit in I2C CR1 when error occurred in Master/Mem Receive IT Process */
+ hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+ /* Abort DMA transfer */
+ if((hi2c->Instance->CR1 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN)
+ {
+ hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+ if(hi2c->hdmatx != NULL)
+ {
+ /* Set the DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+ if(HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+ }
+ }
+ else if(hi2c->hdmarx != NULL)
+ {
+ /* Set the DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+ if(HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+ {
+ /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */
+ hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+ }
+ }
+ }
+ else if(hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ /* STOP Flag is not set after a NACK reception */
+ /* So may inform upper layer that listen phase is stopped */
+ /* during NACK error treatment */
+ if((hi2c->State == HAL_I2C_STATE_LISTEN) && ((hi2c->ErrorCode & HAL_I2C_ERROR_AF) == HAL_I2C_ERROR_AF))
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+
+ /* Generate Start condition if first transfer */
+ if((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME))
+ {
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX)
+ {
+ /* Generate ReStart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+ }
+ else
+ {
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
+
+ /* Wait until ADD10 flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
+ }
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address for read request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentXferOptions = hi2c->XferOptions;
+
+ /* Generate Start condition if first transfer */
+ if((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME))
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+ else if(hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX)
+ {
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate ReStart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+ }
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress);
+ }
+ else
+ {
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
+
+ /* Wait until ADD10 flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Generate Restart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send header of slave address */
+ hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress);
+ }
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for write request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for read request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param DevAddress Target device address
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Enable Acknowledge */
+ hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+ /* Generate Start */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TXE flag is set */
+ if(I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Generate Restart */
+ hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ /* Wait until SB flag is set */
+ if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send slave address */
+ hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress);
+
+ /* Wait until ADDR flag is set */
+ if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK)
+ {
+ if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DMA I2C process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Declaration of temporary variable to prevent undefined behavior of volatile usage */
+ uint32_t CurrentState = hi2c->State;
+ uint32_t CurrentMode = hi2c->Mode;
+
+ if((CurrentState == HAL_I2C_STATE_BUSY_TX) || ((CurrentState == HAL_I2C_STATE_BUSY_RX) && (CurrentMode == HAL_I2C_MODE_SLAVE)))
+ {
+ /* Disable DMA Request */
+ hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+ hi2c->XferCount = 0U;
+
+ /* Enable EVT and ERR interrupt */
+ __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
+ }
+ else
+ {
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Disable Last DMA */
+ hi2c->Instance->CR2 &= ~I2C_CR2_LAST;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+ hi2c->XferCount = 0U;
+
+ /* Check if Errors has been detected during transfer */
+ if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if(hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+ }
+}
+
+/**
+ * @brief DMA I2C communication error callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->XferCount = 0U;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+ HAL_I2C_ErrorCallback(hi2c);
+}
+
+/**
+ * @brief DMA I2C communication abort callback
+ * (To be called at end of DMA Abort procedure).
+ * @param hdma: DMA handle.
+ * @retval None
+ */
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef* hi2c = ( I2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+ hi2c->XferCount = 0U;
+
+ /* Reset XferAbortCallback */
+ hi2c->hdmatx->XferAbortCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Check if come from abort from user */
+ if(hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param Flag specifies the I2C flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Wait until flag is set */
+ while((__HAL_I2C_GET_FLAG(hi2c, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for Master addressing phase.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @param Flag specifies the I2C flag to check.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET)
+ {
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+ /* Clear AF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of TXE flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(I2C_IsAcknowledgeFailed(hi2c) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of BTF flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(I2C_IsAcknowledgeFailed(hi2c) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of STOP flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if(I2C_IsAcknowledgeFailed(hi2c) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+
+ while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
+ {
+ /* Check if a STOPF is detected */
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Acknowledge failed detection during an I2C Communication.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c)
+{
+ if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Clear NACKF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State= HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,651 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_H
+#define __STM32F4xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2C Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSpeed; /*!< Specifies the clock frequency.
+ This parameter must be set to a value lower than 400kHz */
+
+ uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
+ This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_general_call_addressing_mode */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+ * @brief HAL State structure definition
+ * @note HAL I2C State value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : Abort (Abort user request on going)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized and ready to use. HAL I2C Init function called)
+ * b4 (not used)
+ * x : Should be set to 0
+ * b3
+ * 0 : Ready or Busy (No Listen mode ongoing)
+ * 1 : Listen (IP in Address Listen Mode)
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
+ HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
+ process is ongoing */
+ HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
+ process is ongoing */
+ HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+ * @brief HAL Mode structure definition
+ * @note HAL I2C Mode value coding follow below described bitmap :
+ * b7 (not used)
+ * x : Should be set to 0
+ * b6
+ * 0 : None
+ * 1 : Memory (HAL I2C communication is in Memory Mode)
+ * b5
+ * 0 : None
+ * 1 : Slave (HAL I2C communication is in Slave Mode)
+ * b4
+ * 0 : None
+ * 1 : Master (HAL I2C communication is in Master Mode)
+ * b3-b2-b1-b0 (not used)
+ * xxxx : Should be set to 0000
+ */
+typedef enum
+{
+ HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
+ HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
+ HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
+ HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
+
+}HAL_I2C_ModeTypeDef;
+
+/**
+ * @brief I2C handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ __IO uint32_t XferOptions; /*!< I2C transfer options */
+
+ __IO uint32_t PreviousState; /*!< I2C communication Previous state and mode
+ context for internal usage */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code */
+
+ __IO uint32_t Devaddress; /*!< I2C Target device address */
+
+ __IO uint32_t Memaddress; /*!< I2C Target memory address */
+
+ __IO uint32_t MemaddSize; /*!< I2C Target memory address size */
+
+ __IO uint32_t EventCount; /*!< I2C Event counter */
+
+}I2C_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_Error_Code I2C Error Code
+ * @brief I2C Error Code
+ * @{
+ */
+#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001U) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002U) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004U) /*!< AF error */
+#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008U) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout Error */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
+ * @{
+ */
+#define I2C_DUTYCYCLE_2 ((uint32_t)0x00000000U)
+#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY
+/**
+ * @}
+ */
+
+/** @defgroup I2C_addressing_mode I2C addressing mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00004000U)
+#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000U))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000U)
+#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL
+/**
+ * @}
+ */
+
+/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLE ((uint32_t)0x00000000U)
+#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC
+/**
+ * @}
+ */
+
+/** @defgroup I2C_nostretch_mode I2C nostretch mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000U)
+#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001U)
+#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_XferDirection_definition I2C XferDirection definition
+ * @{
+ */
+#define I2C_DIRECTION_RECEIVE ((uint32_t)0x00000000U)
+#define I2C_DIRECTION_TRANSMIT ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_XferOptions_definition I2C XferOptions definition
+ * @{
+ */
+#define I2C_FIRST_FRAME ((uint32_t)0x00000001U)
+#define I2C_NEXT_FRAME ((uint32_t)0x00000002U)
+#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)0x00000004U)
+#define I2C_LAST_FRAME ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @{
+ */
+#define I2C_IT_BUF I2C_CR2_ITBUFEN
+#define I2C_IT_EVT I2C_CR2_ITEVTEN
+#define I2C_IT_ERR I2C_CR2_ITERREN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+#define I2C_FLAG_SMBALERT ((uint32_t)0x00018000U)
+#define I2C_FLAG_TIMEOUT ((uint32_t)0x00014000U)
+#define I2C_FLAG_PECERR ((uint32_t)0x00011000U)
+#define I2C_FLAG_OVR ((uint32_t)0x00010800U)
+#define I2C_FLAG_AF ((uint32_t)0x00010400U)
+#define I2C_FLAG_ARLO ((uint32_t)0x00010200U)
+#define I2C_FLAG_BERR ((uint32_t)0x00010100U)
+#define I2C_FLAG_TXE ((uint32_t)0x00010080U)
+#define I2C_FLAG_RXNE ((uint32_t)0x00010040U)
+#define I2C_FLAG_STOPF ((uint32_t)0x00010010U)
+#define I2C_FLAG_ADD10 ((uint32_t)0x00010008U)
+#define I2C_FLAG_BTF ((uint32_t)0x00010004U)
+#define I2C_FLAG_ADDR ((uint32_t)0x00010002U)
+#define I2C_FLAG_SB ((uint32_t)0x00010001U)
+#define I2C_FLAG_DUALF ((uint32_t)0x00100080U)
+#define I2C_FLAG_SMBHOST ((uint32_t)0x00100040U)
+#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00100020U)
+#define I2C_FLAG_GENCALL ((uint32_t)0x00100010U)
+#define I2C_FLAG_TRA ((uint32_t)0x00100004U)
+#define I2C_FLAG_BUSY ((uint32_t)0x00100002U)
+#define I2C_FLAG_MSL ((uint32_t)0x00100001U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enable or disable the specified I2C interrupts.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2C flag is set or not.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @arg I2C_FLAG_TXE: Data register empty flag
+ * @arg I2C_FLAG_RXNE: Data register not empty flag
+ * @arg I2C_FLAG_STOPF: Stop detection flag
+ * @arg I2C_FLAG_ADD10: 10-bit header sent flag
+ * @arg I2C_FLAG_BTF: Byte transfer finished flag
+ * @arg I2C_FLAG_ADDR: Address sent flag
+ * Address matched flag
+ * @arg I2C_FLAG_SB: Start bit flag
+ * @arg I2C_FLAG_DUALF: Dual flag
+ * @arg I2C_FLAG_SMBHOST: SMBus host header
+ * @arg I2C_FLAG_SMBDEFAULT: SMBus default header
+ * @arg I2C_FLAG_GENCALL: General call header flag
+ * @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+ * @arg I2C_FLAG_BUSY: Bus busy flag
+ * @arg I2C_FLAG_MSL: Master/Slave flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \
+ ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)))
+
+/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
+
+/** @brief Clears the I2C ADDR pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR1; \
+ tmpreg = (__HANDLE__)->Instance->SR2; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clears the I2C STOPF pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR1; \
+ (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Enable the I2C peripheral.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+
+/** @brief Disable the I2C peripheral.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extension module */
+#include "stm32f4xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State, Mode and Errors functions *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+ * @{
+ */
+#define I2C_FLAG_MASK ((uint32_t)0x0000FFFFU)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macros I2C Private Macros
+ * @{
+ */
+
+#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000U)
+#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U))
+#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U)))
+#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3U)) : (((__PCLK__) / ((__SPEED__) * 25U)) | I2C_DUTYCYCLE_16_9))
+#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
+ ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \
+ ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
+
+#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0)))
+#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
+
+#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300U))) >> 7U) | (uint16_t)(0x00F0U))))
+#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300U))) >> 7U) | (uint16_t)(0x00F1U))))
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters
+ * @{
+ */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
+ ((CYCLE) == I2C_DUTYCYCLE_16_9))
+#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+ ((CALL) == I2C_GENERALCALL_ENABLE))
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0) && ((SPEED) <= 400000U))
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (uint32_t)(0xFFFFFC00U)) == 0U)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (uint32_t)(0xFFFFFF01U)) == 0U)
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
+ ((REQUEST) == I2C_NEXT_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,205 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief I2C Extension HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of I2C extension peripheral:
+ * + Extension features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### I2C peripheral extension features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/
+ 429xx/439xx devices contains the following additional features :
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure Noise Filter
+ (#) Configure I2C Analog noise filter using the function HAL_I2C_AnalogFilter_Config()
+ (#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2CEx I2CEx
+ * @brief I2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2CEx_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions
+ * @brief Extension features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures I2C Analog noise filter.
+ * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param AnalogFilter: new state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Reset I2Cx ANOFF bit */
+ hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF);
+
+ /* Disable the analog filter */
+ hi2c->Instance->FLTR |= AnalogFilter;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configures I2C Digital noise filter.
+ * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param DigitalFilter: Coefficient of digital noise filter between 0x00 and 0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+ uint16_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+ if(hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Get the old register value */
+ tmpreg = hi2c->Instance->FLTR;
+
+ /* Reset I2Cx DNF bit [3:0] */
+ tmpreg &= ~(I2C_FLTR_DNF);
+
+ /* Set I2Cx DNF coefficient */
+ tmpreg |= DigitalFilter;
+
+ /* Store the new register value */
+ hi2c->Instance->FLTR = tmpreg;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC ||\
+ STM32F401xE || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2c_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,138 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of I2C HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_EX_H
+#define __STM32F4xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2CEx_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2C Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000U)
+#define I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2CEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macros I2C Private Macros
+ * @{
+ */
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC ||\
+ STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1410 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief I2S HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Integrated Interchip Sound (I2S) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The I2S HAL driver can be used as follow:
+
+ (#) Declare a I2S_HandleTypeDef handle structure.
+ (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API:
+ (##) Enable the SPIx interface clock.
+ (##) I2S pins configuration:
+ (+++) Enable the clock for the I2S GPIOs.
+ (+++) Configure these I2S pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT()
+ and HAL_I2S_Receive_IT() APIs).
+ (+++) Configure the I2Sx interrupt priority.
+ (+++) Enable the NVIC I2S IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA()
+ and HAL_I2S_Receive_DMA() APIs:
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+ DMA Tx/Rx Stream.
+
+ (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
+ using HAL_I2S_Init() function.
+
+ -@- The specific I2S interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __I2S_ENABLE_IT() and __I2S_DISABLE_IT() inside the transmit and receive process.
+ -@- Make sure that either:
+ (+@) I2S PLL is configured or
+ (+@) External clock source is configured after setting correctly
+ the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_I2S_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_I2S_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT()
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA()
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
+ (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
+ (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
+
+ *** I2S HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in USART HAL driver.
+
+ (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode)
+ (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode)
+ (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts
+ (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts
+ (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not
+
+ [..]
+ (@) You can refer to the I2S HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2S I2S
+ * @brief I2S HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup I2S_Private_Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Functions I2S Exported Functions
+ * @{
+ */
+
+/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the I2Sx peripheral in simplex mode:
+
+ (+) User must Implement HAL_I2S_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_I2S_Init() to configure the selected device with
+ the selected configuration:
+ (++) Mode
+ (++) Standard
+ (++) Data Format
+ (++) MCLK Output
+ (++) Audio frequency
+ (++) Polarity
+
+ (+) Call the function HAL_I2S_DeInit() to restore the default configuration
+ of the selected I2Sx peripheral.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2S according to the specified parameters
+ * in the I2S_InitTypeDef and create the associated handle.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmpreg = 0U, i2sdiv = 2U, i2sodd = 0U, packetlength = 1U;
+ uint32_t tmp = 0U, i2sclk = 0U;
+
+ /* Check the I2S handle allocation */
+ if(hi2s == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the I2S parameters */
+ assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance));
+ assert_param(IS_I2S_MODE(hi2s->Init.Mode));
+ assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
+ assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
+ assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
+ assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
+ assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
+ assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
+
+ if(hi2s->State == HAL_I2S_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2s->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_I2S_MspInit(hi2s);
+ }
+
+ hi2s->State = HAL_I2S_STATE_BUSY;
+
+ /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+ SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+ SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+ hi2s->Instance->I2SPR = 0x0002U;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = hi2s->Instance->I2SCFGR;
+
+ /* If the default frequency value has to be written, reinitialize i2sdiv and i2sodd */
+ /* If the requested audio frequency is not the default, compute the prescaler */
+ if(hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT)
+ {
+ /* Check the frame length (For the Prescaler computing) *******************/
+ if(hi2s->Init.DataFormat != I2S_DATAFORMAT_16B)
+ {
+ /* Packet length is 32 bits */
+ packetlength = 2U;
+ }
+
+ /* Get I2S source Clock frequency ****************************************/
+ /* If an external I2S clock has to be used, the specific define should be set
+ in the project configuration or in the stm32f4xx_conf.h file */
+ i2sclk = I2S_GetInputClock(hi2s);
+
+ /* Compute the Real divider depending on the MCLK output state, with a floating point */
+ if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
+ {
+ /* MCLK output is enabled */
+ tmp = (uint32_t)(((((i2sclk / 256U) * 10U) / hi2s->Init.AudioFreq)) + 5U);
+ }
+ else
+ {
+ /* MCLK output is disabled */
+ tmp = (uint32_t)(((((i2sclk / (32U * packetlength)) *10U) / hi2s->Init.AudioFreq)) + 5U);
+ }
+
+ /* Remove the flatting point */
+ tmp = tmp / 10U;
+
+ /* Check the parity of the divider */
+ i2sodd = (uint32_t)(tmp & (uint32_t)1U);
+
+ /* Compute the i2sdiv prescaler */
+ i2sdiv = (uint32_t)((tmp - i2sodd) / 2U);
+
+ /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+ i2sodd = (uint32_t) (i2sodd << 8U);
+ }
+
+ /* Test if the divider is 1 or 0 or greater than 0xFF */
+ if((i2sdiv < 2U) || (i2sdiv > 0xFFU))
+ {
+ /* Set the default values */
+ i2sdiv = 2U;
+ i2sodd = 0U;
+ }
+
+ /* Write to SPIx I2SPR register the computed value */
+ hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
+
+ /* Configure the I2S with the I2S_InitStruct values */
+ tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+#if defined(SPI_I2SCFGR_ASTRTEN)
+ if (hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT)
+ {
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg | SPI_I2SCFGR_ASTRTEN;
+ }
+ else
+ {
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg;
+ }
+#else
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg;
+#endif
+
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the I2S peripheral
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s)
+{
+ /* Check the I2S handle allocation */
+ if(hi2s == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hi2s->State = HAL_I2S_STATE_BUSY;
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_I2S_MspDeInit(hi2s);
+
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State = HAL_I2S_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2S MSP Init
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2S MSP DeInit
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_MspDeInit could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2S data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2S_Transmit()
+ (++) HAL_I2S_Receive()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2S_Transmit_IT()
+ (++) HAL_I2S_Receive_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2S_Transmit_DMA()
+ (++) HAL_I2S_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2S_TxCpltCallback()
+ (++) HAL_I2S_RxCpltCallback()
+ (++) HAL_I2S_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit an amount of data in blocking mode
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @param Timeout: Timeout duration
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tmp1 = 0U;
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ while(hi2s->TxXferCount > 0U)
+ {
+ hi2s->Instance->DR = (*pData++);
+ hi2s->TxXferCount--;
+ /* Wait until TXE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Check if Slave mode is selected */
+ if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX))
+ {
+ /* Wait until Busy flag is reset */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, SET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @param Timeout: Timeout duration
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate
+ * in continuous way and as the I2S is not disabled at the end of the I2S transaction.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tmp1 = 0U;
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_RX;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+
+ /* Receive data */
+ while(hi2s->RxXferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ (*pData++) = hi2s->Instance->DR;
+ hi2s->RxXferCount--;
+ }
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ uint32_t tmp1 = 0U;
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ hi2s->pTxBuffPtr = pData;
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronisation
+ * between Master and Slave otherwise the I2S interrupt should be optimized.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ uint32_t tmp1 = 0U;
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ hi2s->pRxBuffPtr = pData;
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with DMA
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to the Transmit data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+ uint32_t tmp1 = 0U;
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pTxBuffPtr = pData;
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Set the I2S Tx DMA Half transfer complete callback */
+ hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
+
+ /* Set the I2S Tx DMA transfer complete callback */
+ hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
+
+ /* Set the DMA error callback */
+ hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
+
+ /* Enable the Tx DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Check if the I2S Tx request is already enabled */
+ if((hi2s->Instance->CR2 & SPI_CR2_TXDMAEN) != SPI_CR2_TXDMAEN)
+ {
+ /* Enable Tx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with DMA
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+ uint32_t tmp1 = 0U;
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pRxBuffPtr = pData;
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Set the I2S Rx DMA Half transfer complete callback */
+ hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
+
+ /* Set the I2S Rx DMA transfer complete callback */
+ hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
+
+ /* Set the DMA error callback */
+ hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
+
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+
+ /* Enable the Rx DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Check if the I2S Rx request is already enabled */
+ if((hi2s->Instance->CR2 &SPI_CR2_RXDMAEN) != SPI_CR2_RXDMAEN)
+ {
+ /* Enable Rx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Disable the I2S DMA Tx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Disable the I2S DMA Rx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+ {
+ /* Disable the I2S DMA Tx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ else
+ {
+ /* Disable the I2S DMA Rx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Enable the I2S DMA Tx request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Enable the I2S DMA Rx request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+ {
+ /* Enable the I2S DMA Tx request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+ else
+ {
+ /* Enable the I2S DMA Rx request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+ }
+
+ /* If the I2S peripheral is still not enabled, enable it */
+ if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0U)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Disable the I2S Tx/Rx DMA requests */
+ hi2s->Instance->CR2 &= ~SPI_CR2_TXDMAEN;
+ hi2s->Instance->CR2 &= ~SPI_CR2_RXDMAEN;
+
+ /* Abort the I2S DMA Stream tx */
+ if(hi2s->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmatx);
+ }
+ /* Abort the I2S DMA Stream rx */
+ if(hi2s->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmarx);
+ }
+
+ /* Disable I2S peripheral */
+ __HAL_I2S_DISABLE(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2S interrupt request.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+__weak void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+ /* I2S in mode Receiver ------------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ I2S_Receive_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Overrun error interrupt occurred ---------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+ }
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+ /* I2S in mode Transmitter -----------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ I2S_Transmit_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Underrun error interrupt occurred --------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+ }
+ }
+
+ /* Call the Error call Back in case of Errors */
+ if(hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
+ {
+ /* Set the I2S state ready to be able to start again the process */
+ hi2s->State= HAL_I2S_STATE_READY;
+ HAL_I2S_ErrorCallback(hi2s);
+ }
+}
+
+/**
+ * @brief Tx Transfer Half completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer half completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2S error callbacks
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+ __weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2s);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_I2S_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral State functions
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the I2S state
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL state
+ */
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s)
+{
+ return hi2s->State;
+}
+
+/**
+ * @brief Return the I2S error code
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval I2S Error Code
+ */
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s)
+{
+ return hi2s->ErrorCode;
+}
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA I2S transmit process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+ void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_I2S_TxHalfCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_I2S_RxHalfCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S communication error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void I2S_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ hi2s->TxXferCount = 0U;
+ hi2s->RxXferCount = 0U;
+
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ hi2s->ErrorCode |= HAL_I2S_ERROR_DMA;
+ HAL_I2S_ErrorCallback(hi2s);
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s)
+{
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Transmit data */
+ hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+
+ hi2s->TxXferCount--;
+
+ if(hi2s->TxXferCount == 0U)
+ {
+ /* Disable TXE and ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ HAL_I2S_TxCpltCallback(hi2s);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ }
+
+ return HAL_OK;
+ }
+
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s)
+{
+ if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Receive data */
+ (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+
+ hi2s->RxXferCount--;
+
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+
+ if(hi2s->RxXferCount == 0U)
+ {
+ /* Disable RXNE and ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE | I2S_IT_ERR);
+
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ HAL_I2S_RxCpltCallback(hi2s);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles I2S Communication Timeout.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param Flag: Flag checked
+ * @param Status: Value of the flag expected
+ * @param Timeout: Duration of the timeout
+ * @retval HAL status
+ */
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_I2S_GET_FLAG(hi2s, Flag) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Set the I2S State ready */
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_I2S_GET_FLAG(hi2s, Flag) != RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Set the I2S State ready */
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2S_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,494 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_H
+#define __STM32F4xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+
+ uint32_t ClockSource; /*!< Specifies the I2S Clock Source.
+ This parameter can be a value of @ref I2S_Clock_Source */
+
+ uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode.
+ This parameter can be a value of @ref I2S_FullDuplex_Mode */
+
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x03U, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x04U /*!< I2S error state */
+
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /* I2S registers base address */
+
+ I2S_InitTypeDef Init; /* I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* I2S Rx transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+
+ __IO uint32_t ErrorCode; /* I2S Error code */
+
+}I2S_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+ * @{
+ */
+
+/** @defgroup I2S_Error_Code I2S Error Code
+ * @brief I2S Error Code
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000001U) /*!< I2S Underrun error */
+#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002U) /*!< I2S Overrun error */
+#define HAL_I2SEX_ERROR_UDR ((uint32_t)0x00000004U) /*!< I2S extended Underrun error */
+#define HAL_I2SEX_ERROR_OVR ((uint32_t)0x00000008U) /*!< I2S extended Overrun error */
+#define HAL_I2S_ERROR_FRE ((uint32_t)0x00000010U) /*!< I2S Frame format error */
+#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000020U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode I2S Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000U)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100U)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200U)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard I2S Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000U)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010U)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020U)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030U)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000U)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001U)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003U)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output I2S Mclk Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000U)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000U)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000U)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100U)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000U)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050U)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000U)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025U)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000U)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_FullDuplex_Mode I2S FullDuplex Mode
+ * @{
+ */
+#define I2S_FULLDUPLEXMODE_DISABLE ((uint32_t)0x00000000U)
+#define I2S_FULLDUPLEXMODE_ENABLE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000U)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flags_Definition I2S Flags Definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Macros I2S Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+/**
+ * @}
+ */
+
+/* Include I2S Extension module */
+#include "stm32f4xx_hal_i2s_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Peripheral Control and State functions **************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Constants I2S Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_Private_Macros I2S Private Macros
+ * @{
+ */
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX) || \
+ ((MODE) == I2S_MODE_MASTER_RX))
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+
+#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
+ ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Functions I2S Private Functions
+ * @{
+ */
+void I2S_DMATxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMAError(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout);
+HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1478 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief I2S HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of I2S extension peripheral:
+ * + Extension features Functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### I2S Extension features #####
+ ==============================================================================
+ [..]
+ (#) In I2S full duplex mode, each SPI peripheral is able to manage sending and receiving
+ data simultaneously using two data lines. Each SPI peripheral has an extended block
+ called I2Sxext (i.e I2S2ext for SPI2 and I2S3ext for SPI3).
+ (#) The extension block is not a full SPI IP, it is used only as I2S slave to
+ implement full duplex mode. The extension block uses the same clock sources
+ as its master.
+
+ (#) Both I2Sx and I2Sx_ext can be configured as transmitters or receivers.
+
+ [..]
+ (@) Only I2Sx can deliver SCK and WS to I2Sx_ext in full duplex mode, where
+ I2Sx can be I2S2 or I2S3.
+
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send and receive in the same time an amount of data in blocking mode using HAL_I2S_TransmitReceive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send and receive in the same time an amount of data in non blocking mode using HAL_I2S_TransmitReceive_IT()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send and receive an amount of data in non blocking mode (DMA) using HAL_I2S_TransmitReceive_DMA()
+ (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+ (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+ (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2S_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
+ (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
+ (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2SEx I2SEx
+ * @brief I2S HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup I2SEx_Private_Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Functions I2S Exported Functions
+ * @{
+ */
+
+/** @defgroup I2SEx_Group1 Extension features functions
+ * @brief Extension features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension features Functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2S data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2S_TransmitReceive()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2S_TransmitReceive_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2S_TransmitReceive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2S_TxCpltCallback()
+ (++) HAL_I2S_RxCpltCallback()
+ (++) HAL_I2S_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/**
+ * @brief Initializes the I2S according to the specified parameters
+ * in the I2S_InitTypeDef and create the associated handle.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmpreg = 0U, i2sdiv = 2U, i2sodd = 0U, packetlength = 1U;
+ uint32_t tmp = 0U, i2sclk = 0U;
+
+ /* Check the I2S handle allocation */
+ if(hi2s == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the I2S parameters */
+ assert_param(IS_I2S_MODE(hi2s->Init.Mode));
+ assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
+ assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
+ assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
+ assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
+ assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
+ assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
+
+ if(hi2s->State == HAL_I2S_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2s->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX */
+ HAL_I2S_MspInit(hi2s);
+ }
+
+ hi2s->State = HAL_I2S_STATE_BUSY;
+
+ /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+ SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+ SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+ hi2s->Instance->I2SPR = 0x0002U;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = hi2s->Instance->I2SCFGR;
+
+ /* If the default frequency value has to be written, reinitialize i2sdiv and i2sodd */
+ /* If the requested audio frequency is not the default, compute the prescaler */
+ if(hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT)
+ {
+ /* Check the frame length (For the Prescaler computing) *******************/
+ if(hi2s->Init.DataFormat != I2S_DATAFORMAT_16B)
+ {
+ /* Packet length is 32 bits */
+ packetlength = 2U;
+ }
+
+ /* Get I2S source Clock frequency ****************************************/
+ i2sclk = I2S_GetInputClock(hi2s);
+
+ /* Compute the Real divider depending on the MCLK output state, with a floating point */
+ if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
+ {
+ /* MCLK output is enabled */
+ tmp = (uint32_t)(((((i2sclk / 256U) * 10U) / hi2s->Init.AudioFreq)) + 5U);
+ }
+ else
+ {
+ /* MCLK output is disabled */
+ tmp = (uint32_t)(((((i2sclk / (32U * packetlength)) * 10U) / hi2s->Init.AudioFreq)) + 5U);
+ }
+
+ /* Remove the flatting point */
+ tmp = tmp / 10U;
+
+ /* Check the parity of the divider */
+ i2sodd = (uint32_t)(tmp & (uint32_t)1U);
+
+ /* Compute the i2sdiv prescaler */
+ i2sdiv = (uint32_t)((tmp - i2sodd) / 2U);
+
+ /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+ i2sodd = (uint32_t) (i2sodd << 8U);
+ }
+
+ /* Test if the divider is 1 or 0 or greater than 0xFF */
+ if((i2sdiv < 2U) || (i2sdiv > 0xFFU))
+ {
+ /* Set the default values */
+ i2sdiv = 2U;
+ i2sodd = 0U;
+ }
+
+ /* Write to SPIx I2SPR register the computed value */
+ hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
+
+ /* Configure the I2S with the I2S_InitStruct values */
+ tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+#if defined(SPI_I2SCFGR_ASTRTEN)
+ if (hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT)
+ {
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg | SPI_I2SCFGR_ASTRTEN;
+ }
+ else
+ {
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg;
+ }
+#else
+ /* Write to SPIx I2SCFGR */
+ hi2s->Instance->I2SCFGR = tmpreg;
+#endif
+
+ /* Configure the I2S extended if the full duplex mode is enabled */
+ assert_param(IS_I2S_FULLDUPLEX_MODE(hi2s->Init.FullDuplexMode));
+ if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ I2SxEXT(hi2s->Instance)->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+ SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+ SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+ I2SxEXT(hi2s->Instance)->I2SPR = 2U;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = I2SxEXT(hi2s->Instance)->I2SCFGR;
+
+ /* Get the mode to be configured for the extended I2S */
+ if((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX))
+ {
+ tmp = I2S_MODE_SLAVE_RX;
+ }
+ else
+ {
+ if((hi2s->Init.Mode == I2S_MODE_MASTER_RX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_RX))
+ {
+ tmp = I2S_MODE_SLAVE_TX;
+ }
+ }
+
+ /* Configure the I2S Slave with the I2S Master parameter values */
+ tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | tmp | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+ /* Write to SPIx I2SCFGR */
+ I2SxEXT(hi2s->Instance)->I2SCFGR = tmpreg;
+ }
+
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+ hi2s->State= HAL_I2S_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Full-Duplex Transmit/Receive data in blocking mode.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pTxData: a 16-bit pointer to the Transmit data buffer.
+ * @param pRxData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @param Timeout: Timeout duration
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmp1 = 0U;
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the I2S State */
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
+ is selected during the I2S configuration phase, the Size parameter means the number
+ of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
+ frame is selected the Size parameter means the number of 16-bit data length. */
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Set the I2S State busy TX/RX */
+ hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
+
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ /* Check if the I2S is already enabled: The I2S is kept enabled at the end of transaction
+ to avoid the clock de-synchronization between Master and Slave. */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+
+ /* Enable I2Sx peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ while(hi2s->TxXferCount > 0U)
+ {
+ /* Wait until TXE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ hi2s->Instance->DR = (*pTxData++);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until RXNE flag is set */
+ while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) != SPI_SR_RXNE)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ (*pRxData++) = I2SxEXT(hi2s->Instance)->DR;
+
+ hi2s->TxXferCount--;
+ hi2s->RxXferCount--;
+ }
+ }
+ /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+ else
+ {
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral before the I2Sext*/
+ __HAL_I2S_ENABLE(hi2s);
+
+ /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+ }
+ else
+ {
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+ }
+ while(hi2s->TxXferCount > 0U)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until TXE flag is set */
+ while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) != SPI_SR_TXE)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ I2SxEXT(hi2s->Instance)->DR = (*pTxData++);
+
+ /* Wait until RXNE flag is set */
+ if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ (*pRxData++) = hi2s->Instance->DR;
+
+ hi2s->TxXferCount--;
+ hi2s->RxXferCount--;
+ }
+ }
+
+ /* Set the I2S State ready */
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pTxData: a 16-bit pointer to the Transmit data buffer.
+ * @param pRxData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size)
+{
+ uint32_t tmp1 = 0U;
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ hi2s->pTxBuffPtr = pTxData;
+ hi2s->pRxBuffPtr = pRxData;
+
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
+ is selected during the I2S configuration phase, the Size parameter means the number
+ of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
+ frame is selected the Size parameter means the number of 16-bit data length. */
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ /* Enable I2Sext RXNE and ERR interrupts */
+ I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_RXNE | I2S_IT_ERR);
+
+ /* Enable I2Sx TXE and ERR interrupts */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+
+ /* Enable I2Sx peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+ }
+ /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+ else
+ {
+ /* Enable I2Sext TXE and ERR interrupts */
+ I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_TXE |I2S_IT_ERR);
+
+ /* Enable I2Sext RXNE and ERR interrupts */
+ __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Check if the I2S_MODE_MASTER_RX is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Prepare the First Data before enabling the I2S */
+ if(hi2s->TxXferCount != 0U)
+ {
+ /* Transmit First data */
+ I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
+ hi2s->TxXferCount--;
+
+ if(hi2s->TxXferCount == 0U)
+ {
+ /* Disable I2Sext TXE interrupt */
+ I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE;
+ }
+ }
+ }
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+
+ /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+ }
+ }
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Transmit/Receive data in non-blocking mode using DMA
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @param pTxData: a 16-bit pointer to the Transmit data buffer.
+ * @param pRxData: a 16-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be sent:
+ * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+ * configuration phase, the Size parameter means the number of 16-bit data length
+ * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+ * the Size parameter means the number of 16-bit data length.
+ * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+ * between Master and Slave(example: audio streaming).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size)
+{
+ uint32_t *tmp;
+ uint32_t tmp1 = 0U;
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_READY)
+ {
+ hi2s->pTxBuffPtr = pTxData;
+ hi2s->pRxBuffPtr = pRxData;
+
+ tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+ /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
+ is selected during the I2S configuration phase, the Size parameter means the number
+ of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
+ frame is selected the Size parameter means the number of 16-bit data length. */
+ if((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
+ {
+ hi2s->TxXferSize = Size*2U;
+ hi2s->TxXferCount = Size*2U;
+ hi2s->RxXferSize = Size*2U;
+ hi2s->RxXferCount = Size*2U;
+ }
+ else
+ {
+ hi2s->TxXferSize = Size;
+ hi2s->TxXferCount = Size;
+ hi2s->RxXferSize = Size;
+ hi2s->RxXferCount = Size;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
+ hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+ /* Set the I2S Rx DMA Half transfer complete callback */
+ hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
+
+ /* Set the I2S Rx DMA transfer complete callback */
+ hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
+
+ /* Set the I2S Rx DMA error callback */
+ hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
+
+ /* Set the I2S Tx DMA Half transfer complete callback */
+ hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
+
+ /* Set the I2S Tx DMA transfer complete callback */
+ hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
+
+ /* Set the I2S Tx DMA error callback */
+ hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
+
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ /* Enable the Rx DMA Stream */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+ /* Enable Rx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_RXDMAEN;
+
+ /* Enable the Tx DMA Stream */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
+
+ /* Enable Tx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+
+ /* Enable I2S peripheral after the I2Sext */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+ }
+ else
+ {
+ /* Enable the Tx DMA Stream */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, hi2s->TxXferSize);
+
+ /* Enable Tx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_TXDMAEN;
+
+ /* Enable the Rx DMA Stream */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+ /* Enable Rx DMA Request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+
+ /* Check if the I2S is already enabled */
+ if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+ {
+ /* Enable I2S peripheral before the I2Sext */
+ __HAL_I2S_ENABLE(hi2s);
+
+ /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+ }
+ else
+ {
+ /* Check if Master Receiver mode is selected */
+ if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+ {
+ /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+ access to the SPI_SR register. */
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Disable the I2S DMA Tx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Disable the I2S DMA Rx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+ {
+ /* Disable the I2S DMA Tx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ /* Disable the I2SEx Rx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ else
+ {
+ /* Disable the I2S DMA Rx request */
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ /* Disable the I2SEx Tx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ /* Enable the I2S DMA Tx request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ /* Enable the I2S DMA Rx request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ }
+ else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+ {
+ /* Enable the I2S DMA Tx request */
+ hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+ /* Disable the I2SEx Rx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_RXDMAEN;
+ }
+ else
+ {
+ /* Enable the I2S DMA Rx request */
+ hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+ /* Enable the I2SEx Tx DMA Request */
+ I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_TXDMAEN;
+ }
+ }
+
+ /* If the I2S peripheral is still not enabled, enable it */
+ if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0U)
+ {
+ /* Enable I2S peripheral */
+ __HAL_I2S_ENABLE(hi2s);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the audio stream playing from the Media.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
+{
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ /* Disable the I2S Tx/Rx DMA requests */
+ hi2s->Instance->CR2 &= ~SPI_CR2_TXDMAEN;
+ hi2s->Instance->CR2 &= ~SPI_CR2_RXDMAEN;
+
+ if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ /* Disable the I2S extended Tx/Rx DMA requests */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+
+ /* Abort the I2S DMA Stream tx */
+ if(hi2s->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmatx);
+ }
+ /* Abort the I2S DMA Stream rx */
+ if(hi2s->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hi2s->hdmarx);
+ }
+
+ /* Disable I2S peripheral */
+ __HAL_I2S_DISABLE(hi2s);
+
+ if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ /* Disable the I2Sext peripheral */
+ I2SxEXT(hi2s->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE;
+ }
+ hi2s->State = HAL_I2S_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2S interrupt request.
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval None
+ */
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+ __IO uint32_t tmpreg1 = 0U;
+ if(hi2s->Init.FullDuplexMode != I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+ /* I2S in mode Receiver ------------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ I2S_Receive_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Overrun error interrupt occurred ---------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+ }
+ }
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+ /* I2S in mode Tramitter -----------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ I2S_Transmit_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Underrun error interrupt occurred --------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+ }
+ }
+ }
+ else
+ {
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE;
+ tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_RXNE;
+ /* I2Sext in mode Receiver ---------------------------------------------*/
+ if((tmp1 == SPI_SR_RXNE) && (tmp2 == I2S_IT_RXNE))
+ {
+ /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
+ the I2Sext RXNE interrupt will be generated to manage the full-duplex receive phase. */
+ I2SEx_TransmitReceive_IT(hi2s);
+ }
+
+ tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_OVR;
+ tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_ERR;
+ /* I2Sext Overrun error interrupt occurred -----------------------------*/
+ if((tmp1 == SPI_SR_OVR) && (tmp2 == I2S_IT_ERR))
+ {
+ /* Clear I2Sext OVR Flag */
+ tmpreg1 = I2SxEXT(hi2s->Instance)->DR;
+ tmpreg1 = I2SxEXT(hi2s->Instance)->SR;
+ hi2s->ErrorCode |= HAL_I2SEX_ERROR_OVR;
+ UNUSED(tmpreg1);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+ /* I2S in mode Tramitter -----------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
+ the I2S TXE interrupt will be generated to manage the full-duplex transmit phase. */
+ I2SEx_TransmitReceive_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Underrun error interrupt occurred -------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+ }
+ }
+ /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+ else
+ {
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+ /* I2S in mode Receiver ------------------------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
+ the I2S RXNE interrupt will be generated to manage the full-duplex receive phase. */
+ I2SEx_TransmitReceive_IT(hi2s);
+ }
+
+ tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+ tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+ /* I2S Overrun error interrupt occurred --------------------------------*/
+ if((tmp1 != RESET) && (tmp2 != RESET))
+ {
+ __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+ hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+ }
+
+ tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE;
+ tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_TXE;
+ /* I2Sext in mode Tramitter --------------------------------------------*/
+ if((tmp1 == SPI_SR_TXE) && (tmp2 == I2S_IT_TXE))
+ {
+ /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
+ the I2Sext TXE interrupt will be generated to manage the full-duplex transmit phase. */
+ I2SEx_TransmitReceive_IT(hi2s);
+ }
+
+ tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_UDR;
+ tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_ERR;
+ /* I2Sext Underrun error interrupt occurred ----------------------------*/
+ if((tmp1 == SPI_SR_UDR) && (tmp2 == I2S_IT_ERR))
+ {
+ /* Clear I2Sext UDR Flag */
+ tmpreg1 = I2SxEXT(hi2s->Instance)->SR;
+ hi2s->ErrorCode |= HAL_I2SEX_ERROR_UDR;
+ UNUSED(tmpreg1);
+ }
+ }
+ }
+
+ /* Call the Error call Back in case of Errors */
+ if(hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
+ {
+ /* Set the I2S state ready to be able to start again the process */
+ hi2s->State= HAL_I2S_STATE_READY;
+ HAL_I2S_ErrorCallback(hi2s);
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s)
+{
+ uint32_t tmp1 = 0U, tmp2 = 0U;
+
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2s);
+
+ tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+ /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+ if((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
+ {
+ if(hi2s->TxXferCount != 0U)
+ {
+ if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE) != RESET)
+ {
+ /* Transmit data */
+ hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+ hi2s->TxXferCount--;
+
+ if(hi2s->TxXferCount == 0U)
+ {
+ /* Disable TXE interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_TXE);
+ }
+ }
+ }
+
+ if(hi2s->RxXferCount != 0U)
+ {
+ if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) == SPI_SR_RXNE)
+ {
+ /* Receive data */
+ (*hi2s->pRxBuffPtr++) = I2SxEXT(hi2s->Instance)->DR;
+ hi2s->RxXferCount--;
+
+ if(hi2s->RxXferCount == 0U)
+ {
+ /* Disable I2Sext RXNE interrupt */
+ I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_RXNE;
+ }
+ }
+ }
+ }
+ /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+ else
+ {
+ if(hi2s->TxXferCount != 0U)
+ {
+ if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) == SPI_SR_TXE)
+ {
+ /* Transmit data */
+ I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
+ hi2s->TxXferCount--;
+
+ if(hi2s->TxXferCount == 0U)
+ {
+ /* Disable I2Sext TXE interrupt */
+ I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE;
+
+ HAL_I2S_TxCpltCallback(hi2s);
+ }
+ }
+ }
+ if(hi2s->RxXferCount != 0U)
+ {
+ if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE) != RESET)
+ {
+ /* Receive data */
+ (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+ hi2s->RxXferCount--;
+
+ if(hi2s->RxXferCount == 0U)
+ {
+ /* Disable RXNE interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE);
+
+ HAL_I2S_RxCpltCallback(hi2s);
+ }
+ }
+ }
+ }
+
+ tmp1 = hi2s->RxXferCount;
+ tmp2 = hi2s->TxXferCount;
+ if((tmp1 == 0U) && (tmp2 == 0U))
+ {
+ /* Disable I2Sx ERR interrupt */
+ __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_ERR);
+ /* Disable I2Sext ERR interrupt */
+ I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_ERR;
+
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2s);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F401xx ||\
+ STM32F411xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || \
+ STM32F412Rx || STM32F412Cx */
+/**
+ * @brief DMA I2S transmit process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void I2S_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ if(hi2s->Init.FullDuplexMode != I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+
+ /* FullDuplexMode feature enabled */
+ else
+ {
+ if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX))
+ {
+ /* Disable Tx DMA Request for the I2S Master*/
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ else
+ {
+ /* Disable Tx DMA Request for the I2SEx Slave */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+ }
+ }
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F401xx || STM32F411xx ||\
+ STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+ hi2s->TxXferCount = 0U;
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if(hi2s->RxXferCount == 0U)
+ {
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ }
+ else
+ {
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ }
+ HAL_I2S_TxCpltCallback(hi2s);
+}
+
+/**
+ * @brief DMA I2S receive process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void I2S_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+ I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ if(hi2s->Init.FullDuplexMode != I2S_FULLDUPLEXMODE_ENABLE)
+ {
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+ /* FullDuplexMode feature enabled */
+ else
+ {
+ if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX))
+ {
+ /* Disable Rx DMA Request for the I2SEx Slave */
+ I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ else
+ {
+ /* Disable Rx DMA Request for the I2S Master*/
+ hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+ }
+ }
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F401xx || STM32F411xx ||\
+ STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+ hi2s->RxXferCount = 0U;
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+ {
+ if(hi2s->TxXferCount == 0U)
+ {
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ }
+ else
+ {
+ hi2s->State = HAL_I2S_STATE_READY;
+ }
+ }
+ HAL_I2S_RxCpltCallback(hi2s);
+}
+
+/**
+ * @brief Get I2S clock Input based on Source clock selection in RCC
+ * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
+ * the configuration information for I2S module
+ * @retval I2S Clock Input
+ */
+uint32_t I2S_GetInputClock(I2S_HandleTypeDef *hi2s)
+{
+ /* This variable used to store the VCO Input (value in Hz) */
+ uint32_t vcoinput = 0U;
+ /* This variable used to store the VCO Output (value in Hz) */
+ uint32_t vcooutput = 0U;
+ /* This variable used to store the I2S_CK_x (value in Hz) */
+ uint32_t i2ssourceclock = 0U;
+
+ /* Configure 12S Clock based on I2S source clock selection */
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+ switch(hi2s->Init.ClockSource)
+ {
+ case I2S_CLOCK_EXTERNAL :
+ {
+ /* Set the I2S clock to the external clock value */
+ i2ssourceclock = EXTERNAL_CLOCK_VALUE;
+ break;
+ }
+#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+ case I2S_CLOCK_PLL :
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U)));
+ /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+ i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U)));
+ break;
+ }
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+ case I2S_CLOCK_PLLR :
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLL_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+
+ /* PLL_VCO Output = PLL_VCO Input * PLLN */
+ vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U)));
+ /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+ i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U)));
+ break;
+ }
+ case I2S_CLOCK_PLLSRC :
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLL_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ i2ssourceclock = (uint32_t)(HSE_VALUE);
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ i2ssourceclock = (uint32_t)(HSI_VALUE);
+ }
+ break;
+ }
+ default :
+ {
+ break;
+ }
+ }
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F469xx) || defined(STM32F479xx)
+
+ /* If an external I2S clock has to be used, the specific define should be set
+ in the project configuration or in the stm32f4xx_conf.h file */
+ if(hi2s->Init.ClockSource == I2S_CLOCK_EXTERNAL)
+ {
+ /* Set the I2S clock to the external clock value */
+ i2ssourceclock = EXTERNAL_CLOCK_VALUE;
+ }
+ else
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U)));
+ /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+ i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U)));
+ }
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F411xE)
+
+ /* If an external I2S clock has to be used, the specific define should be set
+ in the project configuration or in the stm32f4xx_conf.h file */
+ if(hi2s->Init.ClockSource == I2S_CLOCK_EXTERNAL)
+ {
+ /* Set the I2S clock to the external clock value */
+ i2ssourceclock = EXTERNAL_CLOCK_VALUE;
+ }
+ else
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+ else
+ {
+ /* Get the I2S source clock value */
+ vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U)));
+ /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+ i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U)));
+ }
+#endif /* STM32F411xE */
+
+ /* the return result is the value of I2S clock */
+ return i2ssourceclock;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2S_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_i2s_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,211 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_EX_H
+#define __STM32F4xx_HAL_I2S_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2SEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Types I2S Exported Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Constants I2S Exported Constants
+ * @{
+ */
+
+/** @defgroup I2S_Clock_Source I2S Clock Source
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \
+ defined(STM32F479xx)
+#define I2S_CLOCK_PLL ((uint32_t)0x00000000U)
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001U)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define I2S_CLOCK_PLL ((uint32_t)0x00000000U)
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001U)
+#define I2S_CLOCK_PLLR ((uint32_t)0x00000002U)
+#define I2S_CLOCK_PLLSRC ((uint32_t)0x00000003U)
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define I2S_CLOCK_PLLSRC ((uint32_t)0x00000000U)
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001U)
+#define I2S_CLOCK_PLLR ((uint32_t)0x00000002U)
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Macros I2S Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2SEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2SEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Extended features functions **************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Constants I2S Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Macros I2S Private Macros
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \
+ defined(STM32F479xx)
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\
+ ((CLOCK) == I2S_CLOCK_PLL))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\
+ ((CLOCK) == I2S_CLOCK_PLL) ||\
+ ((CLOCK) == I2S_CLOCK_PLLSRC) ||\
+ ((CLOCK) == I2S_CLOCK_PLLR))
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) ||\
+ ((CLOCK) == I2S_CLOCK_PLLSRC) ||\
+ ((CLOCK) == I2S_CLOCK_PLLR))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Cx) || defined(STM32F410Rx) || \
+ defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || \
+ defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F410Cx || STM32F410Rx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx ||
+ STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Functions I2S Private Functions
+ * @{
+ */
+HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s);
+uint32_t I2S_GetInputClock(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1531 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_irda.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief IRDA HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the IrDA SIR ENDEC block (IrDA):
+ * + Initialization and de-initialization methods
+ * + IO operation methods
+ * + Peripheral Control methods
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The IRDA HAL driver can be used as follows:
+
+ (#) Declare a IRDA_HandleTypeDef handle structure.
+ (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API:
+ (##) Enable the USARTx interface clock.
+ (##) IRDA pins configuration:
+ (+++) Enable the clock for the IRDA GPIOs.
+ (+++) Configure these IRDA pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT()
+ and HAL_IRDA_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA()
+ and HAL_IRDA_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+ (#) Program the Baud Rate, Word Length, Parity, IrDA Mode, Prescaler
+ and Mode(Receiver/Transmitter) in the hirda Init structure.
+
+ (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API:
+ (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customized HAL_IRDA_MspInit() API.
+ -@@- The specific IRDA interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_IRDA_Transmit_IT()
+ (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_IRDA_Receive_IT()
+ (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
+ (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_ErrorCallback
+
+ *** DMA mode IO operation ***
+ =============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_IRDA_Transmit_DMA()
+ (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_IRDA_Receive_DMA()
+ (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
+ (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_IRDA_ErrorCallback
+
+ *** IRDA HAL driver macros list ***
+ ===================================
+ [..]
+ Below the list of most used macros in IRDA HAL driver.
+
+ (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral
+ (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral
+ (+) __HAL_IRDA_GET_FLAG : Checks whether the specified IRDA flag is set or not
+ (+) __HAL_IRDA_CLEAR_FLAG : Clears the specified IRDA pending flag
+ (+) __HAL_IRDA_ENABLE_IT: Enables the specified IRDA interrupt
+ (+) __HAL_IRDA_DISABLE_IT: Disables the specified IRDA interrupt
+
+ (@) You can refer to the IRDA HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup IRDA IRDA
+ * @brief HAL IRDA module driver
+ * @{
+ */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup IRDA_Private_Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup IRDA_Private_Functions
+ * @{
+ */
+static void IRDA_SetConfig (IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda);
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Tickstart,uint32_t Timeout);
+static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda);
+static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Functions IrDA Exported Functions
+ * @{
+ */
+
+/** @defgroup IRDA_Exported_Functions_Group1 IrDA Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+ in IrDA mode.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) BaudRate
+ (++) WordLength
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ please refer to Reference manual for possible IRDA frame formats.
+ (++) Prescaler: A pulse of width less than two and greater than one PSC period(s) may or may
+ not be rejected. The receiver set up time should be managed by software. The IrDA physical layer
+ specification specifies a minimum of 10 ms delay between transmission and
+ reception (IrDA is a half duplex protocol).
+ (++) Mode: Receiver/transmitter modes
+ (++) IrDAMode: the IrDA can operate in the Normal mode or in the Low power mode.
+ [..]
+ The HAL_IRDA_Init() API follows IRDA configuration procedures (details for the procedures
+ are available in reference manual).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the IRDA mode according to the specified
+ * parameters in the IRDA_InitTypeDef and create the associated handle.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda)
+{
+ /* Check the IRDA handle allocation */
+ if(hirda == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the IRDA instance parameters */
+ assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+ /* Check the IRDA mode parameter in the IRDA handle */
+ assert_param(IS_IRDA_POWERMODE(hirda->Init.IrDAMode));
+
+ if(hirda->gState == HAL_IRDA_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hirda->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_IRDA_MspInit(hirda);
+ }
+
+ hirda->gState = HAL_IRDA_STATE_BUSY;
+
+ /* Disable the IRDA peripheral */
+ __HAL_IRDA_DISABLE(hirda);
+
+ /* Set the IRDA communication parameters */
+ IRDA_SetConfig(hirda);
+
+ /* In IrDA mode, the following bits must be kept cleared:
+ - LINEN, STOP and CLKEN bits in the USART_CR2 register,
+ - SCEN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR2_LINEN | USART_CR2_STOP | USART_CR2_CLKEN);
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_SCEN | USART_CR3_HDSEL);
+
+ /* Enable the IRDA peripheral */
+ __HAL_IRDA_ENABLE(hirda);
+
+ /* Set the prescaler */
+ MODIFY_REG(hirda->Instance->GTPR, USART_GTPR_PSC, hirda->Init.Prescaler);
+
+ /* Configure the IrDA mode */
+ MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.IrDAMode);
+
+ /* Enable the IrDA mode by setting the IREN bit in the CR3 register */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_IREN);
+
+ /* Initialize the IRDA state*/
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->gState= HAL_IRDA_STATE_READY;
+ hirda->RxState= HAL_IRDA_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the IRDA peripheral
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda)
+{
+ /* Check the IRDA handle allocation */
+ if(hirda == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+
+ hirda->gState = HAL_IRDA_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_IRDA_DISABLE(hirda);
+
+ /* DeInit the low level hardware */
+ HAL_IRDA_MspDeInit(hirda);
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+ hirda->gState = HAL_IRDA_STATE_RESET;
+ hirda->RxState = HAL_IRDA_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief IRDA MSP Init.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief IRDA MSP DeInit.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions
+ * @brief IRDA Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the IRDA data transfers.
+ [..]
+ IrDA is a half duplex communication protocol. If the Transmitter is busy, any data
+ on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver
+ is busy, data on the TX from the USART to IrDA will not be encoded by IrDA.
+ While receiving data, transmission should be avoided as the data to be transmitted
+ could be corrupted.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks
+ will be executed respectively at the end of the transmit or Receive process
+ The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected
+
+ (#) Blocking mode API's are :
+ (++) HAL_IRDA_Transmit()
+ (++) HAL_IRDA_Receive()
+
+ (#) Non Blocking mode APIs with Interrupt are :
+ (++) HAL_IRDA_Transmit_IT()
+ (++) HAL_IRDA_Receive_IT()
+ (++) HAL_IRDA_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_IRDA_Transmit_DMA()
+ (++) HAL_IRDA_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_IRDA_TxCpltCallback()
+ (++) HAL_IRDA_RxCpltCallback()
+ (++) HAL_IRDA_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sends an amount of data in blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Specify timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0;
+
+ /* Check that a Tx process is not already ongoing */
+ if(hirda->gState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->gState = HAL_IRDA_STATE_BUSY_TX;
+
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ hirda->TxXferSize = Size;
+ hirda->TxXferCount = Size;
+ while(hirda->TxXferCount > 0U)
+ {
+ hirda->TxXferCount--;
+ if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+ {
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ hirda->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ pData +=2U;
+ }
+ else
+ {
+ pData +=1U;
+ }
+ }
+ else
+ {
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ hirda->Instance->DR = (*pData++ & (uint8_t)0xFFU);
+ }
+ }
+
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* At end of Tx process, restore hirda->gState to Ready */
+ hirda->gState = HAL_IRDA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Specify timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0;
+
+ /* Check that a Rx process is not already ongoing */
+ if(hirda->RxState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ hirda->RxXferSize = Size;
+ hirda->RxXferCount = Size;
+ /* Check the remain data to be received */
+ while(hirda->RxXferCount > 0U)
+ {
+ hirda->RxXferCount--;
+ if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+ {
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData ;
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x01FFU);
+ pData +=2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x00FFU);
+ pData +=1U;
+ }
+ }
+ else
+ {
+ if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ *pData++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *pData++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x007FU);
+ }
+ }
+ }
+
+ /* At end of Rx process, restore hirda->RxState to Ready */
+ hirda->RxState = HAL_IRDA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Tx process is not already ongoing */
+ if(hirda->gState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pTxBuffPtr = pData;
+ hirda->TxXferSize = Size;
+ hirda->TxXferCount = Size;
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->gState = HAL_IRDA_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the IRDA Transmit Data Register Empty Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Rx process is not already ongoing */
+ if(hirda->RxState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pRxBuffPtr = pData;
+ hirda->RxXferSize = Size;
+ hirda->RxXferCount = Size;
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the IRDA Data Register not empty Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Enable the IRDA Parity Error Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Tx process is not already ongoing */
+ if(hirda->gState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pTxBuffPtr = pData;
+ hirda->TxXferSize = Size;
+ hirda->TxXferCount = Size;
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->gState = HAL_IRDA_STATE_BUSY_TX;
+
+ /* Set the IRDA DMA transfer complete callback */
+ hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt;
+
+ /* Set the IRDA DMA half transfer complete callback */
+ hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt;
+
+ /* Set the DMA error callback */
+ hirda->hdmatx->XferErrorCallback = IRDA_DMAError;
+
+ /* Set the DMA abort callback */
+ hirda->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the IRDA transmit DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hirda->hdmatx, *(uint32_t*)tmp, (uint32_t)&hirda->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_FLAG_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @note When the IRDA parity is enabled (PCE = 1) the data received contain the parity bit.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Rx process is not already ongoing */
+ if(hirda->RxState == HAL_IRDA_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ hirda->pRxBuffPtr = pData;
+ hirda->RxXferSize = Size;
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
+
+ /* Set the IRDA DMA transfer complete callback */
+ hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt;
+
+ /* Set the IRDA DMA half transfer complete callback */
+ hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt;
+
+ /* Set the DMA error callback */
+ hirda->hdmarx->XferErrorCallback = IRDA_DMAError;
+
+ /* Set the DMA abort callback */
+ hirda->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ /* Enable the IRDA Parity Error Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the DMA Transfer.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda)
+{
+ uint32_t dmarequest = 0x00U;
+
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT);
+ if((hirda->gState == HAL_IRDA_STATE_BUSY_TX) && dmarequest)
+ {
+ /* Disable the IRDA DMA Tx request */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+ }
+
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR);
+ if((hirda->RxState == HAL_IRDA_STATE_BUSY_RX) && dmarequest)
+ {
+ /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the IRDA DMA Rx request */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the DMA Transfer.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda)
+{
+ /* Process Locked */
+ __HAL_LOCK(hirda);
+
+ if(hirda->gState == HAL_IRDA_STATE_BUSY_TX)
+ {
+ /* Enable the IRDA DMA Tx request */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+ }
+ if(hirda->RxState == HAL_IRDA_STATE_BUSY_RX)
+ {
+ /* Clear the Overrun flag before resuming the Rx transfer */
+ __HAL_IRDA_CLEAR_OREFLAG(hirda);
+
+ /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+ SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the IRDA DMA Rx request */
+ SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the DMA Transfer.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda)
+{
+ uint32_t dmarequest = 0x00U;
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback()
+ */
+
+ /* Stop IRDA DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT);
+ if((hirda->gState == HAL_IRDA_STATE_BUSY_TX) && dmarequest)
+ {
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+ /* Abort the IRDA DMA Tx channel */
+ if(hirda->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hirda->hdmatx);
+ }
+ IRDA_EndTxTransfer(hirda);
+ }
+
+ /* Stop IRDA DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR);
+ if((hirda->RxState == HAL_IRDA_STATE_BUSY_RX) && dmarequest)
+ {
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the IRDA DMA Rx channel */
+ if(hirda->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hirda->hdmarx);
+ }
+ IRDA_EndRxTransfer(hirda);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles IRDA interrupt request.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
+{
+ uint32_t isrflags = READ_REG(hirda->Instance->SR);
+ uint32_t cr1its = READ_REG(hirda->Instance->CR1);
+ uint32_t cr3its = READ_REG(hirda->Instance->CR3);
+ uint32_t errorflags = 0x00U;
+ uint32_t dmarequest = 0x00U;
+
+ /* If no error occurs */
+ errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE));
+ if(errorflags == RESET)
+ {
+ /* IRDA in mode Receiver -----------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ IRDA_Receive_IT(hirda);
+ return;
+ }
+ }
+
+ /* If some errors occur */
+ if((errorflags != RESET) && ((cr3its & (USART_CR3_EIE | USART_CR1_PEIE)) != RESET))
+ {
+ /* IRDA parity error interrupt occurred -------------------------------*/
+ if(((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+ {
+ hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
+ }
+
+ /* IRDA noise error interrupt occurred --------------------------------*/
+ if(((isrflags & USART_SR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hirda->ErrorCode |= HAL_IRDA_ERROR_NE;
+ }
+
+ /* IRDA frame error interrupt occurred --------------------------------*/
+ if(((isrflags & USART_SR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
+ }
+
+ /* IRDA Over-Run interrupt occurred -----------------------------------*/
+ if(((isrflags & USART_SR_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hirda->ErrorCode |= HAL_IRDA_ERROR_ORE;
+ }
+ /* Call IRDA Error Call back function if need be -----------------------*/
+ if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
+ {
+ /* IRDA in mode Receiver ---------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ IRDA_Receive_IT(hirda);
+ }
+
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR);
+ /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+ consider error as blocking */
+ if(((hirda->ErrorCode & HAL_IRDA_ERROR_ORE) != RESET) || dmarequest)
+ {
+ /* Blocking error : transfer is aborted
+ Set the IRDA state ready to be able to start again the process,
+ Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+ IRDA_EndRxTransfer(hirda);
+
+ /* Disable the IRDA DMA Rx request if enabled */
+ if(HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR))
+ {
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the IRDA DMA Rx channel */
+ if(hirda->hdmarx != NULL)
+ {
+ /* Set the IRDA DMA Abort callback :
+ will lead to call HAL_IRDA_ErrorCallback() at end of DMA abort procedure */
+ hirda->hdmarx->XferAbortCallback = IRDA_DMAAbortOnError;
+
+ if(HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hirda->hdmarx->XferAbortCallback(hirda->hdmarx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_IRDA_ErrorCallback(hirda);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_IRDA_ErrorCallback(hirda);
+ }
+ }
+ else
+ {
+ /* Non Blocking error : transfer could go on.
+ Error is notified to user through user error callback */
+ HAL_IRDA_ErrorCallback(hirda);
+ hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+ }
+ }
+ return;
+ } /* End if some error occurs */
+
+ /* IRDA in mode Transmitter ------------------------------------------------*/
+ if(((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+ {
+ IRDA_Transmit_IT(hirda);
+ return;
+ }
+
+ /* IRDA in mode Transmitter end --------------------------------------------*/
+ if(((isrflags & USART_SR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+ {
+ IRDA_EndTransmit_IT(hirda);
+ return;
+ }
+}
+
+/**
+ * @brief End ongoing Tx transfer on IRDA peripheral (following error detection or Transmit completion).
+ * @param hirda: IRDA handle.
+ * @retval None
+ */
+static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda)
+{
+ /* Disable TXEIE and TCIE interrupts */
+ CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+ /* At end of Tx process, restore hirda->gState to Ready */
+ hirda->gState = HAL_IRDA_STATE_READY;
+}
+
+/**
+ * @brief End ongoing Rx transfer on IRDA peripheral (following error detection or Reception completion).
+ * @param hirda: IRDA handle.
+ * @retval None
+ */
+static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda)
+{
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* At end of Rx process, restore hirda->RxState to Ready */
+ hirda->RxState = HAL_IRDA_STATE_READY;
+}
+
+/**
+ * @brief DMA IRDA communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hirda->RxXferCount = 0x00U;
+ hirda->TxXferCount = 0x00U;
+
+ HAL_IRDA_ErrorCallback(hirda);
+}
+
+/**
+ * @brief Tx Transfer complete callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+__weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer complete callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer complete callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_RxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief IRDA error callbacks.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+__weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hirda);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_IRDA_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief IRDA State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to return the State of IrDA
+ communication process and also return Peripheral Errors occurred during communication process
+ (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state of the IrDA peripheral.
+ (+) HAL_IRDA_GetError() check in run-time errors that could be occurred during communication.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the IRDA state.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL state
+ */
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda)
+{
+ uint32_t temp1 = 0x00U, temp2 = 0x00U;
+ temp1 = hirda->gState;
+ temp2 = hirda->RxState;
+
+ return (HAL_IRDA_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+ * @brief Return the IARDA error code
+ * @param hirda : pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA.
+ * @retval IRDA Error Code
+ */
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda)
+{
+ return hirda->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA IRDA transmit process complete callback.
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ hirda->TxXferCount = 0U;
+
+ /* Disable the DMA transfer for transmit request by setting the DMAT bit
+ in the IRDA CR3 register */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+ /* Enable the IRDA Transmit Complete Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE);
+ }
+ /* DMA Circular mode */
+ else
+ {
+ HAL_IRDA_TxCpltCallback(hirda);
+ }
+}
+
+/**
+ * @brief DMA IRDA receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_IRDA_TxHalfCpltCallback(hirda);
+}
+
+/**
+ * @brief DMA IRDA receive process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ hirda->RxXferCount = 0U;
+
+ /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+ in the IRDA CR3 register */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+ /* At end of Rx process, restore hirda->RxState to Ready */
+ hirda->RxState = HAL_IRDA_STATE_READY;
+ }
+
+ HAL_IRDA_RxCpltCallback(hirda);
+}
+
+/**
+ * @brief DMA IRDA receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ HAL_IRDA_RxHalfCpltCallback(hirda);
+}
+
+/**
+ * @brief DMA IRDA communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma)
+{
+ uint32_t dmarequest = 0x00U;
+ IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Stop IRDA DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT);
+ if((hirda->gState == HAL_IRDA_STATE_BUSY_TX) && dmarequest)
+ {
+ hirda->TxXferCount = 0U;
+ IRDA_EndTxTransfer(hirda);
+ }
+
+ /* Stop IRDA DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR);
+ if((hirda->RxState == HAL_IRDA_STATE_BUSY_RX) && dmarequest)
+ {
+ hirda->RxXferCount = 0U;
+ IRDA_EndRxTransfer(hirda);
+ }
+
+ hirda->ErrorCode |= HAL_IRDA_ERROR_DMA;
+
+ HAL_IRDA_ErrorCallback(hirda);
+}
+
+/**
+ * @brief This function handles IRDA Communication Timeout.
+ * @param hirda pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @param Flag specifies the IRDA flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Tickstart Tick start value
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is set */
+ while((__HAL_IRDA_GET_FLAG(hirda, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ hirda->gState = HAL_IRDA_STATE_READY;
+ hirda->RxState = HAL_IRDA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hirda);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+ /**
+ * @brief Send an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda)
+{
+ uint16_t* tmp;
+
+ /* Check that a Tx process is ongoing */
+ if(hirda->gState == HAL_IRDA_STATE_BUSY_TX)
+ {
+ if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) hirda->pTxBuffPtr;
+ hirda->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ hirda->pTxBuffPtr += 2U;
+ }
+ else
+ {
+ hirda->pTxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ hirda->Instance->DR = (uint8_t)(*hirda->pTxBuffPtr++ & (uint8_t)0x00FFU);
+ }
+
+ if(--hirda->TxXferCount == 0U)
+ {
+ /* Disable the IRDA Transmit Data Register Empty Interrupt */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Enable the IRDA Transmit Complete Interrupt */
+ SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda)
+{
+ /* Disable the IRDA Transmit Complete Interrupt */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TCIE);
+
+ /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Tx process is ended, restore hirda->gState to Ready */
+ hirda->gState = HAL_IRDA_STATE_READY;
+
+ HAL_IRDA_TxCpltCallback(hirda);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda)
+{
+ uint16_t* tmp;
+ uint16_t uhdata;
+
+ /* Check that a Rx process is ongoing */
+ if(hirda->RxState == HAL_IRDA_STATE_BUSY_RX)
+ {
+ uhdata = (uint16_t) READ_REG(hirda->Instance->DR);
+ if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) hirda->pRxBuffPtr;
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(uhdata & (uint16_t)0x01FFU);
+ hirda->pRxBuffPtr += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(uhdata & (uint16_t)0x00FFU);
+ hirda->pRxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ if(hirda->Init.Parity == IRDA_PARITY_NONE)
+ {
+ *hirda->pRxBuffPtr++ = (uint8_t)(uhdata & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *hirda->pRxBuffPtr++ = (uint8_t)(uhdata & (uint8_t)0x007FU);
+ }
+ }
+
+ if(--hirda->RxXferCount == 0U)
+ {
+ /* Disable the IRDA Data Register not empty Interrupt */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the IRDA Parity Error Interrupt */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+ /* Rx process is completed, restore hirda->RxState to Ready */
+ hirda->RxState = HAL_IRDA_STATE_READY;
+
+ HAL_IRDA_RxCpltCallback(hirda);
+
+ return HAL_OK;
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configures the IRDA peripheral.
+ * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
+ * the configuration information for the specified IRDA module.
+ * @retval None
+ */
+static void IRDA_SetConfig(IRDA_HandleTypeDef *hirda)
+{
+ /* Check the parameters */
+ assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+ assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate));
+ assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength));
+ assert_param(IS_IRDA_PARITY(hirda->Init.Parity));
+ assert_param(IS_IRDA_MODE(hirda->Init.Mode));
+
+ /*-------------------------- IRDA CR2 Configuration ------------------------*/
+ /* Clear STOP[13:12] bits */
+ CLEAR_BIT(hirda->Instance->CR2, USART_CR2_STOP);
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ /* Clear M, PCE, PS, TE and RE bits */
+ CLEAR_BIT(hirda->Instance->CR1, USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE);
+
+ /* Configure the USART Word Length, Parity and mode:
+ Set the M bits according to hirda->Init.WordLength value
+ Set PCE and PS bits according to hirda->Init.Parity value
+ Set TE and RE bits according to hirda->Init.Mode value */
+ /* Write to USART CR1 */
+ SET_BIT(hirda->Instance->CR1, (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* Clear CTSE and RTSE bits */
+ CLEAR_BIT(hirda->Instance->CR3, USART_CR3_RTSE | USART_CR3_CTSE);
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ if((hirda->Instance == USART1) || (hirda->Instance == USART6))
+ {
+ SET_BIT(hirda->Instance->BRR, IRDA_BRR(HAL_RCC_GetPCLK2Freq(), hirda->Init.BaudRate));
+ }
+ else
+ {
+ SET_BIT(hirda->Instance->BRR, IRDA_BRR(HAL_RCC_GetPCLK1Freq(), hirda->Init.BaudRate));
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_IRDA_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_irda.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,594 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of IRDA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IRDA_H
+#define __STM32F4xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+ * @{
+ */
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDA_Word_Length */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler */
+
+ uint32_t IrDAMode; /*!< Specifies the IrDA mode
+ This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL IRDA State structures definition
+ * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains IRDA state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized. HAL IRDA Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+ HAL_IRDA_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_IRDA_STATE_BUSY = 0x24U, /*!< An internal process is ongoing
+ Value is allowed for gState only */
+ HAL_IRDA_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_IRDA_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+ HAL_IRDA_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
+ Value is allowed for gState only */
+ HAL_IRDA_STATE_ERROR = 0xE0U /*!< Error
+ Value is allowed for gState only */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ IRDA_InitTypeDef Init; /* IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_IRDA_StateTypeDef gState; /* IRDA state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+ __IO HAL_IRDA_StateTypeDef RxState; /* IRDA state information related to Rx operations.
+ This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /* IRDA Error code */
+
+}IRDA_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported constants
+ * @{
+ */
+/** @defgroup IRDA_Error_Code IRDA Error Code
+ * @brief IRDA Error Code
+ * @{
+ */
+#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Word_Length IRDA Word Length
+ * @{
+ */
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000U)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Parity IRDA Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint32_t)0x00000000U)
+#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Mode IRDA Transfer Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+ * @{
+ */
+#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP)
+#define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags IRDA Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080U)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040U)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020U)
+#define IRDA_FLAG_IDLE ((uint32_t)0x00000010U)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008U)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004U)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002U)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * @{
+ */
+#define IRDA_IT_PE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define IRDA_IT_TXE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define IRDA_IT_TC ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define IRDA_IT_RXNE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define IRDA_IT_IDLE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+
+#define IRDA_IT_LBD ((uint32_t)(IRDA_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
+
+#define IRDA_IT_CTS ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
+#define IRDA_IT_ERR ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+ * @{
+ */
+
+/** @brief Reset IRDA handle gstate & RxState
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \
+ } while(0)
+
+/** @brief Flushs the IRDA DR register
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified IRDA pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg IRDA_FLAG_TC: Transmission Complete flag.
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the IRDA PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the IRDA FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK)))
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK)))
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK))
+
+/** @brief Macro to enable the IRDA's one bit sample method
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Macro to disable the IRDA's one bit sample method
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * IRDA Handle selects the USARTx or UARTy peripheral
+ * (USART,UART availability and x,y values depending on device).
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * IRDA Handle selects the USARTx or UARTy peripheral
+ * (USART,UART availability and x,y values depending on device).
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IRDA_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Constants IRDA Private Constants
+ * @{
+ */
+
+/** @brief IRDA interruptions flag mask
+ *
+ */
+#define IRDA_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
+
+#define IRDA_CR1_REG_INDEX 1U
+#define IRDA_CR2_REG_INDEX 2U
+#define IRDA_CR3_REG_INDEX 3U
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup IRDA_Private_Macros IRDA Private Macros
+ * @{
+ */
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+#define IS_IRDA_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3U) == 0x00U) && ((MODE) != (uint32_t)0x00000000U))
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+#define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201U)
+
+#define IRDA_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
+#define IRDA_DIVMANT(_PCLK_, _BAUD_) (IRDA_DIV((_PCLK_), (_BAUD_))/100U)
+#define IRDA_DIVFRAQ(_PCLK_, _BAUD_) (((IRDA_DIV((_PCLK_), (_BAUD_)) - (IRDA_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+ = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
+#define IRDA_BRR(_PCLK_, _BAUD_) (((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4U) + \
+ (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0U)) + \
+ (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Functions IRDA Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,258 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_iwdg.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief IWDG HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Independent Watchdog (IWDG) peripheral:
+ * + Initialization and Start functions
+ * + IO operation functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### IWDG Generic features #####
+ ==============================================================================
+ [..]
+ (+) The IWDG can be started by either software or hardware (configurable
+ through option byte).
+
+ (+) The IWDG is clocked by Low-Speed clock (LSI) and thus stays active even
+ if the main clock fails.
+
+ (+) Once the IWDG is started, the LSI is forced ON and both can not be
+ disabled. The counter starts counting down from the reset value (0xFFF).
+ When it reaches the end of count value (0x000) a reset signal is
+ generated (IWDG reset).
+
+ (+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register,
+ the IWDG_RLR value is reloaded in the counter and the watchdog reset is
+ prevented.
+
+ (+) The IWDG is implemented in the VDD voltage domain that is still functional
+ in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
+ IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
+ reset occurs.
+
+ (+) Debug mode : When the microcontroller enters debug mode (core halted),
+ the IWDG counter either continues to work normally or stops, depending
+ on DBG_IWDG_STOP configuration bit in DBG module, accessible through
+ __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros
+
+ [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
+ The IWDG timeout may vary due to LSI frequency dispersion. STM32F4xx
+ devices provide the capability to measure the LSI frequency (LSI clock
+ connected internally to TIM5 CH4 input capture). The measured value
+ can be used to have an IWDG timeout with an acceptable accuracy.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Use IWDG using HAL_IWDG_Init() function to :
+ (+) Enable instance by writing Start keyword in IWDG_KEY register. LSI
+ clock is forced ON and IWDG counter starts downcounting.
+ (+) Enable write access to configuration register: IWDG_PR & IWDG_RLR.
+ (+) Configure the IWDG prescaler and counter reload value. This reload
+ value will be loaded in the IWDG counter each time the watchdog is
+ reloaded, then the IWDG will start counting down from this value.
+ (+) wait for status flags to be reset"
+
+ (#) Then the application program must refresh the IWDG counter at regular
+ intervals during normal operation to prevent an MCU reset, using
+ HAL_IWDG_Refresh() function.
+
+ *** IWDG HAL driver macros list ***
+ ====================================
+ [..]
+ Below the list of most used macros in IWDG HAL driver:
+ (+) __HAL_IWDG_START: Enable the IWDG peripheral
+ (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in
+ the reload register
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+/** @addtogroup IWDG
+ * @brief IWDG HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Defines IWDG Private Defines
+ * @{
+ */
+/* Status register need 5 RC LSI divided by prescaler clock to be updated. With
+ higher prescaler (256), and according to HSI variation, we need to wait at
+ least 6 cycles so 48 ms. */
+#define HAL_IWDG_DEFAULT_TIMEOUT 48U
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup IWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group1
+ * @brief Initialization and Start functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Start functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the IWDG according to the specified parameters in the
+ IWDG_InitTypeDef of associated handle.
+ (+) Once initialization is performed in HAL_IWDG_Init function, Watchdog
+ is reloaded in order to exit function with correct time base.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the IWDG according to the specified parameters in the
+ * IWDG_InitTypeDef and start watchdog. Before exiting function,
+ * watchdog is refreshed in order to have correct time base.
+ * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified IWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg)
+{
+ uint32_t tickstart;
+
+ /* Check the IWDG handle allocation */
+ if(hiwdg == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance));
+ assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler));
+ assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload));
+
+ /* Enable IWDG. LSI is turned on automaticaly */
+ __HAL_IWDG_START(hiwdg);
+
+ /* Enable write access to IWDG_PR and IWDG_RLR registers by writing 0x5555 in KR */
+ IWDG_ENABLE_WRITE_ACCESS(hiwdg);
+
+ /* Write to IWDG registers the Prescaler & Reload values to work with */
+ hiwdg->Instance->PR = hiwdg->Init.Prescaler;
+ hiwdg->Instance->RLR = hiwdg->Init.Reload;
+
+ /* Check pending flag, if previous update not done, return timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait for register to be updated */
+ while(hiwdg->Instance->SR != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HAL_IWDG_DEFAULT_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reload IWDG counter with value defined in the reload register */
+ __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group2
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Refresh the IWDG.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Refresh the IWDG.
+ * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified IWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg)
+{
+ /* Reload IWDG counter with value defined in the reload register */
+ __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_IWDG_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_iwdg.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,243 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IWDG_H
+#define __STM32F4xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG Handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+
+}IWDG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 0x00000000U /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Enable the IWDG peripheral.
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
+
+/**
+ * @brief Reload IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR & IWDG_RLR registers disabled).
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
+ * @{
+ */
+
+/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions
+ * @{
+ */
+/* Initialization/Start functions ********************************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IWDG_Private_Constants IWDG Private Constants
+ * @{
+ */
+
+/**
+ * @brief IWDG Key Register BitMask
+ */
+#define IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */
+#define IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */
+#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */
+#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Macros IWDG Private Macros
+ * @{
+ */
+
+/**
+ * @brief Enable write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
+
+/**
+ * @brief Disable write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
+
+/**
+ * @brief Check IWDG prescaler value.
+ * @param __PRESCALER__ IWDG prescaler value
+ * @retval None
+ */
+#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_8) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+ ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+/**
+ * @brief Check IWDG reload value.
+ * @param __RELOAD__ IWDG reload value
+ * @retval None
+ */
+#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1696 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_lptim.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief LPTIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Low Power Timer (LPTIM) peripheral:
+ * + Initialization and de-initialization functions.
+ * + Start/Stop operation functions in polling mode.
+ * + Start/Stop operation functions in interrupt mode.
+ * + Reading operation functions.
+ * + Peripheral State functions.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LPTIM HAL driver can be used as follows:
+
+ (#)Initialize the LPTIM low level resources by implementing the
+ HAL_LPTIM_MspInit():
+ (##) Enable the LPTIM interface clock using __LPTIMx_CLK_ENABLE().
+ (##) In case of using interrupts (e.g. HAL_LPTIM_PWM_Start_IT()):
+ (+++) Configure the LPTIM interrupt priority using HAL_NVIC_SetPriority().
+ (+++) Enable the LPTIM IRQ handler using HAL_NVIC_EnableIRQ().
+ (+++) In LPTIM IRQ handler, call HAL_LPTIM_IRQHandler().
+
+ (#)Initialize the LPTIM HAL using HAL_LPTIM_Init(). This function
+ configures mainly:
+ (##) The instance: LPTIM1.
+ (##) Clock: the counter clock.
+ (+++) Source : it can be either the ULPTIM input (IN1) or one of
+ the internal clock; (APB, LSE or LSI).
+ (+++) Prescaler: select the clock divider.
+ (##) UltraLowPowerClock : To be used only if the ULPTIM is selected
+ as counter clock source.
+ (+++) Polarity: polarity of the active edge for the counter unit
+ if the ULPTIM input is selected.
+ (+++) SampleTime: clock sampling time to configure the clock glitch
+ filter.
+ (##) Trigger: How the counter start.
+ (+++) Source: trigger can be software or one of the hardware triggers.
+ (+++) ActiveEdge : only for hardware trigger.
+ (+++) SampleTime : trigger sampling time to configure the trigger
+ glitch filter.
+ (##) OutputPolarity : 2 opposite polarities are possibles.
+ (##) UpdateMode: specifies whether the update of the autoreload and
+ the compare values is done immediately or after the end of current
+ period.
+
+ (#)Six modes are available:
+
+ (##) PWM Mode: To generate a PWM signal with specified period and pulse,
+ call HAL_LPTIM_PWM_Start() or HAL_LPTIM_PWM_Start_IT() for interruption
+ mode.
+
+ (##) One Pulse Mode: To generate pulse with specified width in response
+ to a stimulus, call HAL_LPTIM_OnePulse_Start() or
+ HAL_LPTIM_OnePulse_Start_IT() for interruption mode.
+
+ (##) Set once Mode: In this mode, the output changes the level (from
+ low level to high level if the output polarity is configured high, else
+ the opposite) when a compare match occurs. To start this mode, call
+ HAL_LPTIM_SetOnce_Start() or HAL_LPTIM_SetOnce_Start_IT() for
+ interruption mode.
+
+ (##) Encoder Mode: To use the encoder interface call
+ HAL_LPTIM_Encoder_Start() or HAL_LPTIM_Encoder_Start_IT() for
+ interruption mode.
+
+ (##) Time out Mode: an active edge on one selected trigger input rests
+ the counter. The first trigger event will start the timer, any
+ successive trigger event will reset the counter and the timer will
+ restart. To start this mode call HAL_LPTIM_TimeOut_Start_IT() or
+ HAL_LPTIM_TimeOut_Start_IT() for interruption mode.
+
+ (##) Counter Mode: counter can be used to count external events on
+ the LPTIM Input1 or it can be used to count internal clock cycles.
+ To start this mode, call HAL_LPTIM_Counter_Start() or
+ HAL_LPTIM_Counter_Start_IT() for interruption mode.
+
+ (#) User can stop any process by calling the corresponding API:
+ HAL_LPTIM_Xxx_Stop() or HAL_LPTIM_Xxx_Stop_IT() if the process is
+ already started in interruption mode.
+
+ (#)Call HAL_LPTIM_DeInit() to deinitialize the LPTIM peripheral.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup LPTIM LPTIM
+ * @brief LPTIM HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Types LPTIM Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Defines LPTIM Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Variables LPTIM Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Constants LPTIM Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Macros LPTIM Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup LPTIM_Private_Functions_Prototypes LPTIM Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Functions LPTIM Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
+ * @{
+ */
+
+/** @defgroup LPTIM_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the LPTIM according to the specified parameters in the
+ LPTIM_InitTypeDef and creates the associated handle.
+ (+) DeInitialize the LPTIM peripheral.
+ (+) Initialize the LPTIM MSP.
+ (+) DeInitialize LPTIM MSP.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the LPTIM according to the specified parameters in the
+ * LPTIM_InitTypeDef and creates the associated handle.
+ * @param hlptim: LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim)
+{
+ uint32_t tmpcfgr = 0U;
+
+ /* Check the LPTIM handle allocation */
+ if(hlptim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source));
+ assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler));
+ if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM)
+ {
+ assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+ assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime));
+ }
+ assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source));
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime));
+ assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge));
+ }
+ assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity));
+ assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode));
+ assert_param(IS_LPTIM_COUNTER_SOURCE(hlptim->Init.CounterSource));
+
+ if(hlptim->State == HAL_LPTIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hlptim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_LPTIM_MspInit(hlptim);
+ }
+
+ /* Change the LPTIM state */
+ hlptim->State = HAL_LPTIM_STATE_BUSY;
+
+ /* Get the LPTIMx CFGR value */
+ tmpcfgr = hlptim->Instance->CFGR;
+
+ if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM)
+ {
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT));
+ }
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ tmpcfgr &= (uint32_t)(~ (LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL));
+ }
+
+ /* Clear CKSEL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD |
+ LPTIM_CFGR_WAVPOL | LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE ));
+
+ /* Set initialization parameters */
+ tmpcfgr |= (hlptim->Init.Clock.Source |
+ hlptim->Init.Clock.Prescaler |
+ hlptim->Init.OutputPolarity |
+ hlptim->Init.UpdateMode |
+ hlptim->Init.CounterSource);
+
+ if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM)
+ {
+ tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity |
+ hlptim->Init.UltraLowPowerClock.SampleTime);
+ }
+
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Enable External trigger and set the trigger source */
+ tmpcfgr |= (hlptim->Init.Trigger.Source |
+ hlptim->Init.Trigger.ActiveEdge |
+ hlptim->Init.Trigger.SampleTime);
+ }
+
+ /* Write to LPTIMx CFGR */
+ hlptim->Instance->CFGR = tmpcfgr;
+
+ /* Change the LPTIM state */
+ hlptim->State = HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the LPTIM peripheral.
+ * @param hlptim: LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the LPTIM handle allocation */
+ if(hlptim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change the LPTIM state */
+ hlptim->State = HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the LPTIM Peripheral Clock */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* DeInit the low level hardware: CLOCK, NVIC.*/
+ HAL_LPTIM_MspDeInit(hlptim);
+
+ /* Change the LPTIM state */
+ hlptim->State = HAL_LPTIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hlptim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the LPTIM MSP.
+ * @param hlptim: LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes LPTIM MSP.
+ * @param hlptim: LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Group2 LPTIM Start-Stop operation functions
+ * @brief Start-Stop operation functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### LPTIM Start Stop operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start the PWM mode.
+ (+) Stop the PWM mode.
+ (+) Start the One pulse mode.
+ (+) Stop the One pulse mode.
+ (+) Start the Set once mode.
+ (+) Stop the Set once mode.
+ (+) Start the Encoder mode.
+ (+) Stop the Encoder mode.
+ (+) Start the Timeout mode.
+ (+) Stop the Timeout mode.
+ (+) Start the Counter mode.
+ (+) Stop the Counter mode.
+
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the LPTIM PWM generation.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Reset WAVE bit to set PWM mode */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM PWM generation.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM PWM generation in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Reset WAVE bit to set PWM mode */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+
+ /* Enable Autoreload write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Enable Compare write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Enable Autoreload match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Enable Compare match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then enable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Enable external trigger interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM PWM generation in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Disable Autoreload write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Disable Compare write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Disable Autoreload match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Disable Compare match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then disable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Disable external trigger interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM One pulse generation.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Reset WAVE bit to set one pulse mode */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_SINGLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM One pulse generation.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM One pulse generation in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Reset WAVE bit to set one pulse mode */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+
+ /* Enable Autoreload write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Enable Compare write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Enable Autoreload match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Enable Compare match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then enable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Enable external trigger interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_SINGLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM One pulse generation in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Disable Autoreload write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Disable Compare write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Disable Autoreload match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Disable Compare match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then disable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Disable external trigger interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM in Set once mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Set WAVE bit to enable the set once mode */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in single mode */
+ __HAL_LPTIM_START_SINGLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM Set once mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the LPTIM Set once mode in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Pulse : Specifies the compare value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Pulse));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Set WAVE bit to enable the set once mode */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE;
+
+ /* Enable Autoreload write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Enable Compare write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Enable Autoreload match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Enable Compare match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then enable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Enable external trigger interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the pulse value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+
+ /* Start timer in single mode */
+ __HAL_LPTIM_START_SINGLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the LPTIM Set once mode in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Disable Autoreload write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Disable Compare write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
+
+ /* Disable Autoreload match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Disable Compare match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* If external trigger source is used, then disable external trigger interrupt */
+ if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
+ {
+ /* Disable external trigger interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+ }
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Encoder interface.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+ uint32_t tmpcfgr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC);
+ assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1);
+ assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Get the LPTIMx CFGR value */
+ tmpcfgr = hlptim->Instance->CFGR;
+
+ /* Clear CKPOL bits */
+ tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL);
+
+ /* Set Input polarity */
+ tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity;
+
+ /* Write to LPTIMx CFGR */
+ hlptim->Instance->CFGR = tmpcfgr;
+
+ /* Set ENC bit to enable the encoder interface */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_ENC;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Encoder interface.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Reset ENC bit to disable the encoder interface */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC;
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Encoder interface in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+ uint32_t tmpcfgr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC);
+ assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1);
+ assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Configure edge sensitivity for encoder mode */
+ /* Get the LPTIMx CFGR value */
+ tmpcfgr = hlptim->Instance->CFGR;
+
+ /* Clear CKPOL bits */
+ tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL);
+
+ /* Set Input polarity */
+ tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity;
+
+ /* Write to LPTIMx CFGR */
+ hlptim->Instance->CFGR = tmpcfgr;
+
+ /* Set ENC bit to enable the encoder interface */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_ENC;
+
+ /* Enable "switch to down direction" interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_DOWN);
+
+ /* Enable "switch to up direction" interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_UP);
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Encoder interface in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Reset ENC bit to disable the encoder interface */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC;
+
+ /* Disable "switch to down direction" interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_DOWN);
+
+ /* Disable "switch to up direction" interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_UP);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Timeout function. The first trigger event will start the
+ * timer, any successive trigger event will reset the counter and
+ * the timer restarts.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Timeout : Specifies the TimeOut value to rest the counter.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Timeout));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Set TIMOUT bit to enable the timeout function */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT;
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the Timeout value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Timeout);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Timeout function.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Reset TIMOUT bit to enable the timeout function */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT;
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Timeout function in interrupt mode. The first trigger
+ * event will start the timer, any successive trigger event will reset
+ * the counter and the timer restarts.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @param Timeout : Specifies the TimeOut value to rest the counter.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+ assert_param(IS_LPTIM_PULSE(Timeout));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT();
+
+ /* Enable rising edge trigger on the LPTIM Wake-up Timer Exti line */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();
+
+ /* Set TIMOUT bit to enable the timeout function */
+ hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT;
+
+ /* Enable Compare match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Load the Timeout value in the compare register */
+ __HAL_LPTIM_COMPARE_SET(hlptim, Timeout);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Timeout function in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable rising edge trigger on the LPTIM Wake-up Timer Exti line */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();
+
+ /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT();
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Reset TIMOUT bit to enable the timeout function */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT;
+
+ /* Disable Compare match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Counter mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
+ if((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+ {
+ /* Check if clock is prescaled */
+ assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
+ /* Set clock prescaler to 0 */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC;
+ }
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Counter mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the Counter mode in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @param Period : Specifies the Autoreload value.
+ * This parameter must be a value between 0x0000 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+ assert_param(IS_LPTIM_PERIOD(Period));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT();
+
+ /* Enable rising edge trigger on the LPTIM Wake-up Timer Exti line */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();
+
+ /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
+ if((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+ {
+ /* Check if clock is prescaled */
+ assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
+ /* Set clock prescaler to 0 */
+ hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC;
+ }
+
+ /* Enable Autoreload write complete interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Enable Autoreload match interrupt */
+ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Enable the Peripheral */
+ __HAL_LPTIM_ENABLE(hlptim);
+
+ /* Load the period value in the autoreload register */
+ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+ /* Start timer in continuous mode */
+ __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the Counter mode in interrupt mode.
+ * @param hlptim : LPTIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ /* Set the LPTIM state */
+ hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+ /* Disable rising edge trigger on the LPTIM Wake-up Timer Exti line */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();
+
+ /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT();
+
+ /* Disable the Peripheral */
+ __HAL_LPTIM_DISABLE(hlptim);
+
+ /* Disable Autoreload write complete interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+
+ /* Disable Autoreload match interrupt */
+ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+
+ /* Change the TIM state*/
+ hlptim->State= HAL_LPTIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Group3 LPTIM Read operation functions
+ * @brief Read operation functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### LPTIM Read operation functions #####
+ ==============================================================================
+[..] This section provides LPTIM Reading functions.
+ (+) Read the counter value.
+ (+) Read the period (Auto-reload) value.
+ (+) Read the pulse (Compare)value.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function returns the current counter value.
+ * @param hlptim: LPTIM handle
+ * @retval Counter value.
+ */
+uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ return (hlptim->Instance->CNT);
+}
+
+/**
+ * @brief This function return the current Autoreload (Period) value.
+ * @param hlptim: LPTIM handle
+ * @retval Autoreload value.
+ */
+uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ return (hlptim->Instance->ARR);
+}
+
+/**
+ * @brief This function return the current Compare (Pulse) value.
+ * @param hlptim: LPTIM handle
+ * @retval Compare value.
+ */
+uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Check the parameters */
+ assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+
+ return (hlptim->Instance->CMP);
+}
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup LPTIM_Group4 LPTIM IRQ handler
+ * @brief LPTIM IRQ handler.
+ *
+@verbatim
+ ==============================================================================
+ ##### LPTIM IRQ handler #####
+ ==============================================================================
+[..] This section provides LPTIM IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function handles LPTIM interrupt request.
+ * @param hlptim: LPTIM handle
+ * @retval None
+ */
+void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Compare match interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPM) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMPM) !=RESET)
+ {
+ /* Clear Compare match flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPM);
+ /* Compare match Callback */
+ HAL_LPTIM_CompareMatchCallback(hlptim);
+ }
+ }
+
+ /* Autoreload match interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARRM) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARRM) !=RESET)
+ {
+ /* Clear Autoreload match flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARRM);
+ /* Autoreload match Callback */
+ HAL_LPTIM_AutoReloadMatchCallback(hlptim);
+ }
+ }
+
+ /* Trigger detected interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_EXTTRIG) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_EXTTRIG) !=RESET)
+ {
+ /* Clear Trigger detected flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_EXTTRIG);
+ /* Trigger detected callback */
+ HAL_LPTIM_TriggerCallback(hlptim);
+ }
+ }
+
+ /* Compare write interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPOK) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_FLAG_CMPM) !=RESET)
+ {
+ /* Clear Compare write flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK);
+ /* Compare write Callback */
+ HAL_LPTIM_CompareWriteCallback(hlptim);
+ }
+ }
+
+ /* Autoreload write interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARROK) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARROK) !=RESET)
+ {
+ /* Clear Autoreload write flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK);
+ /* Autoreload write Callback */
+ HAL_LPTIM_AutoReloadWriteCallback(hlptim);
+ }
+ }
+
+ /* Direction counter changed from Down to Up interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_UP) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_UP) !=RESET)
+ {
+ /* Clear Direction counter changed from Down to Up flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_UP);
+ /* Direction counter changed from Down to Up Callback */
+ HAL_LPTIM_DirectionUpCallback(hlptim);
+ }
+ }
+
+ /* Direction counter changed from Up to Down interrupt */
+ if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_DOWN) != RESET)
+ {
+ if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_DOWN) !=RESET)
+ {
+ /* Clear Direction counter changed from Up to Down flag */
+ __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DOWN);
+ /* Direction counter changed from Up to Down Callback */
+ HAL_LPTIM_DirectionDownCallback(hlptim);
+ }
+ }
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_CLEAR_FLAG();
+}
+
+/**
+ * @brief Compare match callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_CompareMatchCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Autoreload match callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_AutoReloadMatchCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Trigger detected callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Compare write callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_CompareWriteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Autoreload write callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_AutoReloadWriteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Direction counter changed from Down to Up callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_DirectionUpCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Direction counter changed from Up to Down callback in non blocking mode
+ * @param hlptim : LPTIM handle
+ * @retval None
+ */
+__weak void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hlptim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LPTIM_DirectionDownCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Group5 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the LPTIM state.
+ * @param hlptim: LPTIM handle
+ * @retval HAL state
+ */
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim)
+{
+ return hlptim->State;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_lptim.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,763 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_lptim.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of LPTIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LPTIM_H
+#define __STM32F4xx_HAL_LPTIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup LPTIM LPTIM
+ * @brief LPTIM HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Types LPTIM Exported Types
+ * @{
+ */
+
+/** @defgroup LPTIM_WAKEUPTIMER_EXTILINE LPTIM WAKEUP Timer EXTI Line
+ * @{
+ */
+#define LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR23) /*!< External interrupt line 23 Connected to the LPTIM EXTI Line */
+/**
+ * @}
+ */
+
+/**
+ * @brief LPTIM Clock configuration definition
+ */
+typedef struct
+{
+ uint32_t Source; /*!< Selects the clock source.
+ This parameter can be a value of @ref LPTIM_Clock_Source */
+
+ uint32_t Prescaler; /*!< Specifies the counter clock Prescaler.
+ This parameter can be a value of @ref LPTIM_Clock_Prescaler */
+
+}LPTIM_ClockConfigTypeDef;
+
+/**
+ * @brief LPTIM Clock configuration definition
+ */
+typedef struct
+{
+ uint32_t Polarity; /*!< Selects the polarity of the active edge for the counter unit
+ if the ULPTIM input is selected.
+ Note: This parameter is used only when Ultra low power clock source is used.
+ Note: If the polarity is configured on 'both edges', an auxiliary clock
+ (one of the Low power oscillator) must be active.
+ This parameter can be a value of @ref LPTIM_Clock_Polarity */
+
+ uint32_t SampleTime; /*!< Selects the clock sampling time to configure the clock glitch filter.
+ Note: This parameter is used only when Ultra low power clock source is used.
+ This parameter can be a value of @ref LPTIM_Clock_Sample_Time */
+
+}LPTIM_ULPClockConfigTypeDef;
+
+/**
+ * @brief LPTIM Trigger configuration definition
+ */
+typedef struct
+{
+ uint32_t Source; /*!< Selects the Trigger source.
+ This parameter can be a value of @ref LPTIM_Trigger_Source */
+
+ uint32_t ActiveEdge; /*!< Selects the Trigger active edge.
+ Note: This parameter is used only when an external trigger is used.
+ This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */
+
+ uint32_t SampleTime; /*!< Selects the trigger sampling time to configure the clock glitch filter.
+ Note: This parameter is used only when an external trigger is used.
+ This parameter can be a value of @ref LPTIM_Trigger_Sample_Time */
+}LPTIM_TriggerConfigTypeDef;
+
+/**
+ * @brief LPTIM Initialization Structure definition
+ */
+typedef struct
+{
+ LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */
+
+ LPTIM_ULPClockConfigTypeDef UltraLowPowerClock; /*!< Specifies the Ultra Low Power clock parameters */
+
+ LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */
+
+ uint32_t OutputPolarity; /*!< Specifies the Output polarity.
+ This parameter can be a value of @ref LPTIM_Output_Polarity */
+
+ uint32_t UpdateMode; /*!< Specifies whether the update of the autorelaod and the compare
+ values is done immediately or after the end of current period.
+ This parameter can be a value of @ref LPTIM_Updating_Mode */
+
+ uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event
+ or each external event.
+ This parameter can be a value of @ref LPTIM_Counter_Source */
+
+}LPTIM_InitTypeDef;
+
+/**
+ * @brief HAL LPTIM State structure definition
+ */
+typedef enum __HAL_LPTIM_StateTypeDef
+{
+ HAL_LPTIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_LPTIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_LPTIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_LPTIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_LPTIM_STATE_ERROR = 0x04U /*!< Internal Process is ongoing */
+}HAL_LPTIM_StateTypeDef;
+
+/**
+ * @brief LPTIM handle Structure definition
+ */
+typedef struct
+{
+ LPTIM_TypeDef *Instance; /*!< Register base address */
+
+ LPTIM_InitTypeDef Init; /*!< LPTIM required parameters */
+
+ HAL_StatusTypeDef Status; /*!< LPTIM peripheral status */
+
+ HAL_LockTypeDef Lock; /*!< LPTIM locking object */
+
+ __IO HAL_LPTIM_StateTypeDef State; /*!< LPTIM peripheral state */
+
+}LPTIM_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Constants LPTIM Exported Constants
+ * @{
+ */
+
+/** @defgroup LPTIM_Clock_Source LPTIM Clock Source
+ * @{
+ */
+#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC ((uint32_t)0x00U)
+#define LPTIM_CLOCKSOURCE_ULPTIM LPTIM_CFGR_CKSEL
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Clock_Prescaler LPTIM Clock Prescaler
+ * @{
+ */
+#define LPTIM_PRESCALER_DIV1 ((uint32_t)0x00000000U)
+#define LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0
+#define LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1
+#define LPTIM_PRESCALER_DIV8 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1))
+#define LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2
+#define LPTIM_PRESCALER_DIV32 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2))
+#define LPTIM_PRESCALER_DIV64 ((uint32_t)(LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2))
+#define LPTIM_PRESCALER_DIV128 ((uint32_t)LPTIM_CFGR_PRESC)
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Output_Polarity LPTIM Output Polarity
+ * @{
+ */
+
+#define LPTIM_OUTPUTPOLARITY_HIGH ((uint32_t)0x00000000U)
+#define LPTIM_OUTPUTPOLARITY_LOW (LPTIM_CFGR_WAVPOL)
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Clock_Sample_Time LPTIM Clock Sample Time
+ * @{
+ */
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION ((uint32_t)0x00000000U)
+#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS LPTIM_CFGR_CKFLT_0
+#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS LPTIM_CFGR_CKFLT_1
+#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS LPTIM_CFGR_CKFLT
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Clock_Polarity LPTIM Clock Polarity
+ * @{
+ */
+
+#define LPTIM_CLOCKPOLARITY_RISING ((uint32_t)0x00000000U)
+#define LPTIM_CLOCKPOLARITY_FALLING LPTIM_CFGR_CKPOL_0
+#define LPTIM_CLOCKPOLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Trigger_Source LPTIM Trigger Source
+ * @{
+ */
+#define LPTIM_TRIGSOURCE_SOFTWARE ((uint32_t)0x0000FFFFU)
+#define LPTIM_TRIGSOURCE_0 ((uint32_t)0x00000000U)
+#define LPTIM_TRIGSOURCE_1 ((uint32_t)LPTIM_CFGR_TRIGSEL_0)
+#define LPTIM_TRIGSOURCE_2 LPTIM_CFGR_TRIGSEL_1
+#define LPTIM_TRIGSOURCE_3 ((uint32_t)LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_1)
+#define LPTIM_TRIGSOURCE_4 LPTIM_CFGR_TRIGSEL_2
+#define LPTIM_TRIGSOURCE_5 ((uint32_t)LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_2)
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_External_Trigger_Polarity LPTIM External Trigger Polarity
+ * @{
+ */
+#define LPTIM_ACTIVEEDGE_RISING LPTIM_CFGR_TRIGEN_0
+#define LPTIM_ACTIVEEDGE_FALLING LPTIM_CFGR_TRIGEN_1
+#define LPTIM_ACTIVEEDGE_RISING_FALLING LPTIM_CFGR_TRIGEN
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Trigger_Sample_Time LPTIM Trigger Sample Time
+ * @{
+ */
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION ((uint32_t)0x00000000U)
+#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS LPTIM_CFGR_TRGFLT_0
+#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS LPTIM_CFGR_TRGFLT_1
+#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS LPTIM_CFGR_TRGFLT
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Updating_Mode LPTIM Updating Mode
+ * @{
+ */
+
+#define LPTIM_UPDATE_IMMEDIATE ((uint32_t)0x00000000U)
+#define LPTIM_UPDATE_ENDOFPERIOD LPTIM_CFGR_PRELOAD
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Counter_Source LPTIM Counter Source
+ * @{
+ */
+
+#define LPTIM_COUNTERSOURCE_INTERNAL ((uint32_t)0x00000000U)
+#define LPTIM_COUNTERSOURCE_EXTERNAL LPTIM_CFGR_COUNTMODE
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Flag_Definition LPTIM Flag Definition
+ * @{
+ */
+
+#define LPTIM_FLAG_DOWN LPTIM_ISR_DOWN
+#define LPTIM_FLAG_UP LPTIM_ISR_UP
+#define LPTIM_FLAG_ARROK LPTIM_ISR_ARROK
+#define LPTIM_FLAG_CMPOK LPTIM_ISR_CMPOK
+#define LPTIM_FLAG_EXTTRIG LPTIM_ISR_EXTTRIG
+#define LPTIM_FLAG_ARRM LPTIM_ISR_ARRM
+#define LPTIM_FLAG_CMPM LPTIM_ISR_CMPM
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Interrupts_Definition LPTIM Interrupts Definition
+ * @{
+ */
+
+#define LPTIM_IT_DOWN LPTIM_IER_DOWNIE
+#define LPTIM_IT_UP LPTIM_IER_UPIE
+#define LPTIM_IT_ARROK LPTIM_IER_ARROKIE
+#define LPTIM_IT_CMPOK LPTIM_IER_CMPOKIE
+#define LPTIM_IT_EXTTRIG LPTIM_IER_EXTTRIGIE
+#define LPTIM_IT_ARRM LPTIM_IER_ARRMIE
+#define LPTIM_IT_CMPM LPTIM_IER_CMPMIE
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Option Register Definition
+ * @{
+ */
+#define LPTIM_OP_PAD_AF ((uint32_t)0x00000000U)
+#define LPTIM_OP_PAD_PA4 LPTIM_OR_OR_0
+#define LPTIM_OP_PAD_PB9 LPTIM_OR_OR_1
+#define LPTIM_OP_TIM_DAC LPTIM_OR_OR
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset LPTIM handle state
+ * @param __HANDLE__: LPTIM handle
+ * @retval None
+ */
+#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)
+
+/**
+ * @brief Enable/Disable the LPTIM peripheral.
+ * @param __HANDLE__: LPTIM handle
+ * @retval None
+ */
+#define __HAL_LPTIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE))
+#define __HAL_LPTIM_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(LPTIM_CR_ENABLE))
+
+/**
+ * @brief Starts the LPTIM peripheral in Continuous or in single mode.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_CNTSTRT)
+#define __HAL_LPTIM_START_SINGLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_SNGSTRT)
+
+
+/**
+ * @brief Writes the passed parameter in the Autoreload register.
+ * @param __HANDLE__: LPTIM handle
+ * @param __VALUE__ : Autoreload value
+ * @retval None
+ */
+#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__))
+
+/**
+ * @brief Writes the passed parameter in the Compare register.
+ * @param __HANDLE__: LPTIM handle
+ * @param __VALUE__ : Compare value
+ * @retval None
+ */
+#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->CMP = (__VALUE__))
+
+/**
+ * @brief Checks whether the specified LPTIM flag is set or not.
+ * @param __HANDLE__: LPTIM handle
+ * @param __FLAG__ : LPTIM flag to check
+ * This parameter can be a value of:
+ * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
+ * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
+ * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
+ * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
+ * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+ * @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
+ * @arg LPTIM_FLAG_CMPM : Compare match Flag.
+ * @retval The state of the specified flag (SET or RESET).
+ */
+#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the specified LPTIM flag.
+ * @param __HANDLE__: LPTIM handle.
+ * @param __FLAG__ : LPTIM flag to clear.
+ * This parameter can be a value of:
+ * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
+ * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
+ * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
+ * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
+ * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+ * @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
+ * @arg LPTIM_FLAG_CMPM : Compare match Flag.
+ * @retval None.
+ */
+#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable the specified LPTIM interrupt.
+ * @param __HANDLE__ : LPTIM handle.
+ * @param __INTERRUPT__ : LPTIM interrupt to set.
+ * This parameter can be a value of:
+ * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
+ * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
+ * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
+ * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
+ * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+ * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
+ * @arg LPTIM_IT_CMPM : Compare match Interrupt.
+ * @retval None.
+ */
+#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+ /**
+ * @brief Disable the specified LPTIM interrupt.
+ * @param __HANDLE__ : LPTIM handle.
+ * @param __INTERRUPT__ : LPTIM interrupt to set.
+ * This parameter can be a value of:
+ * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
+ * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
+ * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
+ * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
+ * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+ * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
+ * @arg LPTIM_IT_CMPM : Compare match Interrupt.
+ * @retval None.
+ */
+#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+ /**
+ * @brief Checks whether the specified LPTIM interrupt is set or not.
+ * @param __HANDLE__ : LPTIM handle.
+ * @param __INTERRUPT__ : LPTIM interrupt to check.
+ * This parameter can be a value of:
+ * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
+ * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
+ * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
+ * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
+ * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+ * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
+ * @arg LPTIM_IT_CMPM : Compare match Interrupt.
+ * @retval Interrupt status.
+ */
+
+#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief LPTIM Option Register
+ * @param __HANDLE__: LPTIM handle
+ * @param __VALUE__: This parameter can be a value of :
+ * @arg LPTIM_OP_PAD_AF
+ * @arg LPTIM_OP_PAD_PA4
+ * @arg LPTIM_OP_PAD_PB9
+ * @arg LPTIM_OP_TIM_DAC
+ * @retval None
+ */
+#define __HAL_LPTIM_OPTR_CONFIG(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->OR = (__VALUE__))
+
+/**
+ * @brief Enable interrupt on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable interrupt on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable event on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable event on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\
+ }while(0)
+
+/**
+ * @brief Disable rising & falling edge trigger on the LPTIM Wake-up Timer associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\
+ }while(0)
+
+/**
+ * @brief Check whether the LPTIM Wake-up Timer associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Clear the LPTIM Wake-up Timer associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the LPTIM Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_LPTIM_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);
+HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);
+
+/* MSP functions *************************************************************/
+void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim);
+
+/* Start/Stop operation functions *********************************************/
+/* ################################# PWM Mode ################################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# One Pulse Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Set once Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################### Encoder Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# Time out Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Counter Mode ###############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* Reading operation functions ************************************************/
+uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim);
+
+/* LPTIM IRQ functions *******************************************************/
+void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);
+
+/* CallBack functions ********************************************************/
+void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim);
+
+/* Peripheral State functions ************************************************/
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Types LPTIM Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Variables LPTIM Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Constants LPTIM Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Macros LPTIM Private Macros
+ * @{
+ */
+
+#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \
+ ((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC))
+
+#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_PRESCALER_DIV1 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV2 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV4 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV8 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV16 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV32 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV64 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV128))
+#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) == LPTIM_PRESCALER_DIV1)
+
+#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \
+ ((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH))
+
+#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \
+ ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS) || \
+ ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS) || \
+ ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS))
+
+#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING) || \
+ ((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \
+ ((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING))
+
+#define IS_LPTIM_TRG_SOURCE(__TRIG__) (((__TRIG__) == LPTIM_TRIGSOURCE_SOFTWARE) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_0) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_1) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_2) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_3) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_4) || \
+ ((__TRIG__) == LPTIM_TRIGSOURCE_5))
+
+#define IS_LPTIM_EXT_TRG_POLARITY(__POLAR__) (((__POLAR__) == LPTIM_ACTIVEEDGE_RISING ) || \
+ ((__POLAR__) == LPTIM_ACTIVEEDGE_FALLING ) || \
+ ((__POLAR__) == LPTIM_ACTIVEEDGE_RISING_FALLING ))
+
+#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION) || \
+ ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS ) || \
+ ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS ) || \
+ ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS ))
+
+#define IS_LPTIM_UPDATE_MODE(__MODE__) (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \
+ ((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD))
+
+#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \
+ ((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL))
+
+#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__) ((__AUTORELOAD__) <= 0x0000FFFFU)
+
+#define IS_LPTIM_COMPARE(__COMPARE__) ((__COMPARE__) <= 0x0000FFFFU)
+
+#define IS_LPTIM_PERIOD(PERIOD) ((PERIOD) <= 0x0000FFFFU)
+
+#define IS_LPTIM_PULSE(PULSE) ((PULSE) <= 0x0000FFFFU)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Functions LPTIM Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LPTIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1910 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief LTDC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the LTDC peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Program the required configuration through the following parameters:
+ the LTDC timing, the horizontal and vertical polarity,
+ the pixel clock polarity, Data Enable polarity and the LTDC background color value
+ using HAL_LTDC_Init() function
+
+ (#) Program the required configuration through the following parameters:
+ the pixel format, the blending factors, input alpha value, the window size
+ and the image size using HAL_LTDC_ConfigLayer() function for foreground
+ or/and background layer.
+
+ (#) Optionally, configure and enable the CLUT using HAL_LTDC_ConfigCLUT() and
+ HAL_LTDC_EnableCLUT functions.
+
+ (#) Optionally, enable the Dither using HAL_LTDC_EnableDither().
+
+ (#) Optionally, configure and enable the Color keying using HAL_LTDC_ConfigColorKeying()
+ and HAL_LTDC_EnableColorKeying functions.
+
+ (#) Optionally, configure LineInterrupt using HAL_LTDC_ProgramLineEvent()
+ function
+
+ (#) If needed, reconfigure and change the pixel format value, the alpha value
+ value, the window size, the window position and the layer start address
+ for foreground or/and background layer using respectively the following
+ functions: HAL_LTDC_SetPixelFormat(), HAL_LTDC_SetAlpha(), HAL_LTDC_SetWindowSize(),
+ HAL_LTDC_SetWindowPosition(), HAL_LTDC_SetAddress.
+
+ (#) Variant functions with _NoReload post fix allows to set the LTDC configuration/settings without immediate reload.
+ This is useful in case when the program requires to modify serval LTDC settings (on one or both layers)
+ then applying(reload) these settings in one shot by calling the function HAL_LTDC_Relaod
+
+ After calling the _NoReload functions to set different color/format/layer settings,
+ the program can call the function HAL_LTDC_Relaod To apply(Reload) these settings.
+ Function HAL_LTDC_Relaod can be called with the parameter ReloadType
+ set to LTDC_RELOAD_IMMEDIATE if an immediate reload is required.
+ Function HAL_LTDC_Relaod can be called with the parameter ReloadType
+ set to LTDC_RELOAD_VERTICAL_BLANKING if the reload should be done in the next vertical blanking period,
+ this option allows to avoid display flicker by applying the new settings during the vertical blanking period.
+
+
+ (#) To control LTDC state you can use the following function: HAL_LTDC_GetState()
+
+ *** LTDC HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in LTDC HAL driver.
+
+ (+) __HAL_LTDC_ENABLE: Enable the LTDC.
+ (+) __HAL_LTDC_DISABLE: Disable the LTDC.
+ (+) __HAL_LTDC_LAYER_ENABLE: Enable the LTDC Layer.
+ (+) __HAL_LTDC_LAYER_DISABLE: Disable the LTDC Layer.
+ (+) __HAL_LTDC_RELOAD_CONFIG: Reload Layer Configuration.
+ (+) __HAL_LTDC_GET_FLAG: Get the LTDC pending flags.
+ (+) __HAL_LTDC_CLEAR_FLAG: Clear the LTDC pending flags.
+ (+) __HAL_LTDC_ENABLE_IT: Enable the specified LTDC interrupts.
+ (+) __HAL_LTDC_DISABLE_IT: Disable the specified LTDC interrupts.
+ (+) __HAL_LTDC_GET_IT_SOURCE: Check whether the specified LTDC interrupt has occurred or not.
+
+ [..]
+ (@) You can refer to the LTDC HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup LTDC LTDC
+ * @brief LTDC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+
+#if defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup LTDC_Exported_Functions LTDC Exported Functions
+ * @{
+ */
+
+/** @defgroup LTDC_Exported_Functions_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the LTDC
+ (+) De-initialize the LTDC
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the LTDC according to the specified
+ * parameters in the LTDC_InitTypeDef and create the associated handle.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc)
+{
+ uint32_t tmp = 0U, tmp1 = 0U;
+
+ /* Check the LTDC peripheral state */
+ if(hltdc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check function parameters */
+ assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance));
+ assert_param(IS_LTDC_HSYNC(hltdc->Init.HorizontalSync));
+ assert_param(IS_LTDC_VSYNC(hltdc->Init.VerticalSync));
+ assert_param(IS_LTDC_AHBP(hltdc->Init.AccumulatedHBP));
+ assert_param(IS_LTDC_AVBP(hltdc->Init.AccumulatedVBP));
+ assert_param(IS_LTDC_AAH(hltdc->Init.AccumulatedActiveH));
+ assert_param(IS_LTDC_AAW(hltdc->Init.AccumulatedActiveW));
+ assert_param(IS_LTDC_TOTALH(hltdc->Init.TotalHeigh));
+ assert_param(IS_LTDC_TOTALW(hltdc->Init.TotalWidth));
+ assert_param(IS_LTDC_HSPOL(hltdc->Init.HSPolarity));
+ assert_param(IS_LTDC_VSPOL(hltdc->Init.VSPolarity));
+ assert_param(IS_LTDC_DEPOL(hltdc->Init.DEPolarity));
+ assert_param(IS_LTDC_PCPOL(hltdc->Init.PCPolarity));
+
+ if(hltdc->State == HAL_LTDC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hltdc->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_LTDC_MspInit(hltdc);
+ }
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Configures the HS, VS, DE and PC polarity */
+ hltdc->Instance->GCR &= ~(LTDC_GCR_HSPOL | LTDC_GCR_VSPOL | LTDC_GCR_DEPOL | LTDC_GCR_PCPOL);
+ hltdc->Instance->GCR |= (uint32_t)(hltdc->Init.HSPolarity | hltdc->Init.VSPolarity | \
+ hltdc->Init.DEPolarity | hltdc->Init.PCPolarity);
+
+ /* Sets Synchronization size */
+ hltdc->Instance->SSCR &= ~(LTDC_SSCR_VSH | LTDC_SSCR_HSW);
+ tmp = (hltdc->Init.HorizontalSync << 16U);
+ hltdc->Instance->SSCR |= (tmp | hltdc->Init.VerticalSync);
+
+ /* Sets Accumulated Back porch */
+ hltdc->Instance->BPCR &= ~(LTDC_BPCR_AVBP | LTDC_BPCR_AHBP);
+ tmp = (hltdc->Init.AccumulatedHBP << 16U);
+ hltdc->Instance->BPCR |= (tmp | hltdc->Init.AccumulatedVBP);
+
+ /* Sets Accumulated Active Width */
+ hltdc->Instance->AWCR &= ~(LTDC_AWCR_AAH | LTDC_AWCR_AAW);
+ tmp = (hltdc->Init.AccumulatedActiveW << 16U);
+ hltdc->Instance->AWCR |= (tmp | hltdc->Init.AccumulatedActiveH);
+
+ /* Sets Total Width */
+ hltdc->Instance->TWCR &= ~(LTDC_TWCR_TOTALH | LTDC_TWCR_TOTALW);
+ tmp = (hltdc->Init.TotalWidth << 16U);
+ hltdc->Instance->TWCR |= (tmp | hltdc->Init.TotalHeigh);
+
+ /* Sets the background color value */
+ tmp = ((uint32_t)(hltdc->Init.Backcolor.Green) << 8U);
+ tmp1 = ((uint32_t)(hltdc->Init.Backcolor.Red) << 16U);
+ hltdc->Instance->BCCR &= ~(LTDC_BCCR_BCBLUE | LTDC_BCCR_BCGREEN | LTDC_BCCR_BCRED);
+ hltdc->Instance->BCCR |= (tmp1 | tmp | hltdc->Init.Backcolor.Blue);
+
+ /* Enable the transfer Error interrupt */
+ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_TE);
+
+ /* Enable the FIFO underrun interrupt */
+ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_FU);
+
+ /* Enable LTDC by setting LTDCEN bit */
+ __HAL_LTDC_ENABLE(hltdc);
+
+ /* Initialize the error code */
+ hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;
+
+ /* Initialize the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the LTDC peripheral registers to their default reset
+ * values.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc)
+{
+ /* DeInit the low level hardware */
+ HAL_LTDC_MspDeInit(hltdc);
+
+ /* Initialize the error code */
+ hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;
+
+ /* Initialize the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the LTDC MSP.
+ * @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the LTDC MSP.
+ * @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides function allowing to:
+ (+) Handle LTDC interrupt request
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Handles LTDC interrupt request.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL status
+ */
+void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc)
+{
+ /* Transfer Error Interrupt management ***************************************/
+ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_TE) != RESET)
+ {
+ if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_TE) != RESET)
+ {
+ /* Disable the transfer Error interrupt */
+ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE);
+
+ /* Clear the transfer error flag */
+ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_TE);
+
+ /* Update error code */
+ hltdc->ErrorCode |= HAL_LTDC_ERROR_TE;
+
+ /* Change LTDC state */
+ hltdc->State = HAL_LTDC_STATE_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ /* Transfer error Callback */
+ HAL_LTDC_ErrorCallback(hltdc);
+ }
+ }
+ /* FIFO underrun Interrupt management ***************************************/
+ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_FU) != RESET)
+ {
+ if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_FU) != RESET)
+ {
+ /* Disable the FIFO underrun interrupt */
+ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU);
+
+ /* Clear the FIFO underrun flag */
+ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_FU);
+
+ /* Update error code */
+ hltdc->ErrorCode |= HAL_LTDC_ERROR_FU;
+
+ /* Change LTDC state */
+ hltdc->State = HAL_LTDC_STATE_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ /* Transfer error Callback */
+ HAL_LTDC_ErrorCallback(hltdc);
+ }
+ }
+ /* Line Interrupt management ************************************************/
+ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_LI) != RESET)
+ {
+ if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_LI) != RESET)
+ {
+ /* Disable the Line interrupt */
+ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI);
+
+ /* Clear the Line interrupt flag */
+ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_LI);
+
+ /* Change LTDC state */
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ /* Line interrupt Callback */
+ HAL_LTDC_LineEventCallback(hltdc);
+ }
+ }
+ /* Register reload Interrupt management ***************************************/
+ if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_RR) != RESET)
+ {
+ if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_RR) != RESET)
+ {
+ /* Disable the register reload interrupt */
+ __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_RR);
+
+ /* Clear the register reload flag */
+ __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_RR);
+
+ /* Change LTDC state */
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ /* Register reload interrupt Callback */
+ HAL_LTDC_ReloadEventCallback(hltdc);
+ }
+ }
+}
+
+/**
+ * @brief Error LTDC callback.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Line Event callback.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_LineEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Reload Event callback.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval None
+ */
+__weak void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hltdc);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_LTDC_ReloadEvenCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the LTDC foreground or/and background parameters.
+ (+) Set the active layer.
+ (+) Configure the color keying.
+ (+) Configure the C-LUT.
+ (+) Enable / Disable the color keying.
+ (+) Enable / Disable the C-LUT.
+ (+) Update the layer position.
+ (+) Update the layer size.
+ (+) Update pixel format on the fly.
+ (+) Update transparency on the fly.
+ (+) Update address on the fly.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the LTDC Layer according to the specified
+ * parameters in the LTDC_InitTypeDef and create the associated handle.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param pLayerCfg: pointer to a LTDC_LayerCfgTypeDef structure that contains
+ * the configuration information for the Layer.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat));
+ assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1));
+ assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+ assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0));
+ assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth));
+ assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight));
+
+ /* Copy new layer configuration into handle structure */
+ hltdc->LayerCfg[LayerIdx] = *pLayerCfg;
+
+ /* Configure the LTDC Layer */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Initialize the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the color keying.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param RGBValue: the color key value
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Configures the default color values */
+ LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED);
+ LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Load the color lookup table.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param pCLUT: pointer to the color lookup table address.
+ * @param CLUTSize: the color lookup table size.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx)
+{
+ uint32_t tmp = 0U;
+ uint32_t counter = 0U;
+ uint32_t pcounter = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ for(counter = 0U; (counter < CLUTSize); counter++)
+ {
+ if(hltdc->LayerCfg[LayerIdx].PixelFormat == LTDC_PIXEL_FORMAT_AL44)
+ {
+ tmp = (((counter + 16U*counter) << 24U) | ((uint32_t)(*pCLUT) & 0xFFU) | ((uint32_t)(*pCLUT) & 0xFF00U) | ((uint32_t)(*pCLUT) & 0xFF0000U));
+ }
+ else
+ {
+ tmp = ((counter << 24U) | ((uint32_t)(*pCLUT) & 0xFFU) | ((uint32_t)(*pCLUT) & 0xFF00U) | ((uint32_t)(*pCLUT) & 0xFF0000U));
+ }
+ pcounter = (uint32_t)pCLUT + sizeof(*pCLUT);
+ pCLUT = (uint32_t *)pcounter;
+
+ /* Specifies the C-LUT address and RGB value */
+ LTDC_LAYER(hltdc, LayerIdx)->CLUTWR = tmp;
+ }
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the color keying.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Enable LTDC color keying by setting COLKEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the color keying.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color keying by setting COLKEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the color lookup table.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color lookup table by setting CLUTEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the color lookup table.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color lookup table by setting CLUTEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN;
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables Dither.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Enable Dither by setting DTEN bit */
+ LTDC->GCR |= (uint32_t)LTDC_GCR_DTEN;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables Dither.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Disable Dither by setting DTEN bit */
+ LTDC->GCR &= ~(uint32_t)LTDC_GCR_DTEN;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the LTDC window size.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param XSize: LTDC Pixel per line
+ * @param YSize: LTDC Line number
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Check the parameters (Layers parameters)*/
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+ assert_param(IS_LTDC_CFBLL(XSize));
+ assert_param(IS_LTDC_CFBLNBR(YSize));
+
+ /* update horizontal start/stop */
+ pLayerCfg->WindowX0 = 0U;
+ pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0;
+
+ /* update vertical start/stop */
+ pLayerCfg->WindowY0 = 0U;
+ pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0;
+
+ /* Reconfigures the color frame buffer pitch in byte */
+ pLayerCfg->ImageWidth = XSize;
+
+ /* Reconfigures the frame buffer line number */
+ pLayerCfg->ImageHeight = YSize;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the LTDC window position.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param X0: LTDC window X offset
+ * @param Y0: LTDC window Y offset
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+
+ /* update horizontal start/stop */
+ pLayerCfg->WindowX0 = X0;
+ pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth;
+
+ /* update vertical start/stop */
+ pLayerCfg->WindowY0 = Y0;
+ pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the pixel format.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Pixelformat: new pixel format value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the pixel format */
+ pLayerCfg->PixelFormat = Pixelformat;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the layer alpha value.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Alpha: new alpha value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_ALPHA(Alpha));
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the Alpha value */
+ pLayerCfg->Alpha = Alpha;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+/**
+ * @brief Reconfigure the frame buffer Address.
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Address: new address value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the Address */
+ pLayerCfg->FBStartAdress = Address;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Sets the Reload type */
+ hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width that is
+ * larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to layer for which we
+ * want to read and display on screen only a portion 320x240 taken in the center of the buffer. The pitch in pixels
+ * will be in that case 800 pixels and not 320 pixels as initially configured by previous call to HAL_LTDC_ConfigLayer().
+ * Note : this function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default pitch
+ * configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above).
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LinePitchInPixels: New line pitch in pixels to configure for LTDC layer 'LayerIdx'.
+ * @param LayerIdx: LTDC layer index concerned by the modification of line pitch.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx)
+{
+ uint32_t tmp = 0U;
+ uint32_t pitchUpdate = 0U;
+ uint32_t pixelFormat = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* get LayerIdx used pixel format */
+ pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat;
+
+ if(pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
+ {
+ tmp = 4U;
+ }
+ else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888)
+ {
+ tmp = 3U;
+ }
+ else if((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_AL88))
+ {
+ tmp = 2U;
+ }
+ else
+ {
+ tmp = 1U;
+ }
+
+ pitchUpdate = ((LinePitchInPixels * tmp) << 16U);
+
+ /* Clear previously set standard pitch */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP;
+
+ /* Sets the Reload type as immediate update of LTDC pitch configured above */
+ LTDC->SRCR |= LTDC_SRCR_IMR;
+
+ /* Set new line pitch value */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate;
+
+ /* Sets the Reload type as immediate update of LTDC pitch configured above */
+ LTDC->SRCR |= LTDC_SRCR_IMR;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Define the position of the line interrupt .
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Line: Line Interrupt Position.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LIPOS(Line));
+
+ /* Enable the Line interrupt */
+ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_LI);
+
+ /* Sets the Line Interrupt position */
+ LTDC->LIPCR = (uint32_t)Line;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief LTDC configuration relaod .
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param ReloadType: This parameter can be one of the following values :
+ * LTDC_RELOAD_IMMEDIATE : Immediate Reload
+ * LTDC_SRCR_VBR : Reload in the next Vertical Blanking
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_Relaod(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType)
+{
+ assert_param(IS_LTDC_RELAOD(ReloadType));
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Enable the Reload interrupt */
+ __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_RR);
+
+ /* Apply Reload type */
+ hltdc->Instance->SRCR = ReloadType;
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the LTDC Layer according to the specified without reloading
+ * parameters in the LTDC_InitTypeDef and create the associated handle.
+ * Variant of the function HAL_LTDC_ConfigLayer without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param pLayerCfg: pointer to a LTDC_LayerCfgTypeDef structure that contains
+ * the configuration information for the Layer.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat));
+ assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1));
+ assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+ assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0));
+ assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth));
+ assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight));
+
+ /* Copy new layer configuration into handle structure */
+ hltdc->LayerCfg[LayerIdx] = *pLayerCfg;
+
+ /* Configure the LTDC Layer */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Initialize the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the LTDC window size without reloading.
+ * Variant of the function HAL_LTDC_SetWindowSize without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param XSize: LTDC Pixel per line
+ * @param YSize: LTDC Line number
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Check the parameters (Layers parameters)*/
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+ assert_param(IS_LTDC_CFBLL(XSize));
+ assert_param(IS_LTDC_CFBLNBR(YSize));
+
+ /* update horizontal start/stop */
+ pLayerCfg->WindowX0 = 0;
+ pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0;
+
+ /* update vertical start/stop */
+ pLayerCfg->WindowY0 = 0;
+ pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0;
+
+ /* Reconfigures the color frame buffer pitch in byte */
+ pLayerCfg->ImageWidth = XSize;
+
+ /* Reconfigures the frame buffer line number */
+ pLayerCfg->ImageHeight = YSize;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the LTDC window position without reloading.
+ * Variant of the function HAL_LTDC_SetWindowPosition without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param X0: LTDC window X offset
+ * @param Y0: LTDC window Y offset
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+ assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+ assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+ assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+
+ /* update horizontal start/stop */
+ pLayerCfg->WindowX0 = X0;
+ pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth;
+
+ /* update vertical start/stop */
+ pLayerCfg->WindowY0 = Y0;
+ pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the pixel format without reloading.
+ * Variant of the function HAL_LTDC_SetPixelFormat without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDfef structure that contains
+ * the configuration information for the LTDC.
+ * @param Pixelformat: new pixel format value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+ assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the pixel format */
+ pLayerCfg->PixelFormat = Pixelformat;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the layer alpha value without reloading.
+ * Variant of the function HAL_LTDC_SetAlpha without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Alpha: new alpha value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_ALPHA(Alpha));
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the Alpha value */
+ pLayerCfg->Alpha = Alpha;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reconfigure the frame buffer Address without reloading.
+ * Variant of the function HAL_LTDC_SetAddress without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param Address: new address value.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx)
+{
+ LTDC_LayerCfgTypeDef *pLayerCfg;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Get layer configuration from handle structure */
+ pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+ /* Reconfigure the Address */
+ pLayerCfg->FBStartAdress = Address;
+
+ /* Set LTDC parameters */
+ LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width that is
+ * larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to layer for which we
+ * want to read and display on screen only a portion 320x240 taken in the center of the buffer. The pitch in pixels
+ * will be in that case 800 pixels and not 320 pixels as initially configured by previous call to HAL_LTDC_ConfigLayer().
+ * Note : this function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default pitch
+ * configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above).
+ * Variant of the function HAL_LTDC_SetPitch without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LinePitchInPixels: New line pitch in pixels to configure for LTDC layer 'LayerIdx'.
+ * @param LayerIdx: LTDC layer index concerned by the modification of line pitch.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx)
+{
+ uint32_t tmp = 0;
+ uint32_t pitchUpdate = 0;
+ uint32_t pixelFormat = 0;
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* get LayerIdx used pixel format */
+ pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat;
+
+ if(pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
+ {
+ tmp = 4;
+ }
+ else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888)
+ {
+ tmp = 3;
+ }
+ else if((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ (pixelFormat == LTDC_PIXEL_FORMAT_AL88))
+ {
+ tmp = 2;
+ }
+ else
+ {
+ tmp = 1;
+ }
+
+ pitchUpdate = ((LinePitchInPixels * tmp) << 16);
+
+ /* Clear previously set standard pitch */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP;
+
+ /* Set new line pitch value */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Configure the color keying without reloading.
+ * Variant of the function HAL_LTDC_ConfigColorKeying without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param RGBValue: the color key value
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Configures the default color values */
+ LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED);
+ LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the color keying without reloading.
+ * Variant of the function HAL_LTDC_EnableColorKeying without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Enable LTDC color keying by setting COLKEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the color keying without reloading.
+ * Variant of the function HAL_LTDC_DisableColorKeying without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color keying by setting COLKEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the color lookup table without reloading.
+ * Variant of the function HAL_LTDC_EnableCLUT without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color lookup table by setting CLUTEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the color lookup table without reloading.
+ * Variant of the function HAL_LTDC_DisableCLUT without immediate reload
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values:
+ * 0 or 1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+ /* Process locked */
+ __HAL_LOCK(hltdc);
+
+ /* Change LTDC peripheral state */
+ hltdc->State = HAL_LTDC_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_LTDC_LAYER(LayerIdx));
+
+ /* Disable LTDC color lookup table by setting CLUTEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN;
+
+ /* Do not Sets the Reload */
+
+ /* Change the LTDC state*/
+ hltdc->State = HAL_LTDC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hltdc);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the LTDC state.
+ (+) Get error code.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the LTDC state
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @retval HAL state
+ */
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc)
+{
+ return hltdc->State;
+}
+
+/**
+* @brief Return the LTDC error code
+* @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+* @retval LTDC Error Code
+*/
+uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc)
+{
+ return hltdc->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Configures the LTDC peripheral
+ * @param hltdc : Pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param pLayerCfg: Pointer LTDC Layer Configuration structure
+ * @param LayerIdx: LTDC Layer index.
+ * This parameter can be one of the following values: 0 or 1
+ * @retval None
+ */
+static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{
+ uint32_t tmp = 0U;
+ uint32_t tmp1 = 0U;
+ uint32_t tmp2 = 0U;
+
+ /* Configures the horizontal start and stop position */
+ tmp = ((pLayerCfg->WindowX1 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U)) << 16U);
+ LTDC_LAYER(hltdc, LayerIdx)->WHPCR &= ~(LTDC_LxWHPCR_WHSTPOS | LTDC_LxWHPCR_WHSPPOS);
+ LTDC_LAYER(hltdc, LayerIdx)->WHPCR = ((pLayerCfg->WindowX0 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U) + 1U) | tmp);
+
+ /* Configures the vertical start and stop position */
+ tmp = ((pLayerCfg->WindowY1 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP)) << 16U);
+ LTDC_LAYER(hltdc, LayerIdx)->WVPCR &= ~(LTDC_LxWVPCR_WVSTPOS | LTDC_LxWVPCR_WVSPPOS);
+ LTDC_LAYER(hltdc, LayerIdx)->WVPCR = ((pLayerCfg->WindowY0 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP) + 1U) | tmp);
+
+ /* Specifies the pixel format */
+ LTDC_LAYER(hltdc, LayerIdx)->PFCR &= ~(LTDC_LxPFCR_PF);
+ LTDC_LAYER(hltdc, LayerIdx)->PFCR = (pLayerCfg->PixelFormat);
+
+ /* Configures the default color values */
+ tmp = ((uint32_t)(pLayerCfg->Backcolor.Green) << 8U);
+ tmp1 = ((uint32_t)(pLayerCfg->Backcolor.Red) << 16U);
+ tmp2 = (pLayerCfg->Alpha0 << 24U);
+ LTDC_LAYER(hltdc, LayerIdx)->DCCR &= ~(LTDC_LxDCCR_DCBLUE | LTDC_LxDCCR_DCGREEN | LTDC_LxDCCR_DCRED | LTDC_LxDCCR_DCALPHA);
+ LTDC_LAYER(hltdc, LayerIdx)->DCCR = (pLayerCfg->Backcolor.Blue | tmp | tmp1 | tmp2);
+
+ /* Specifies the constant alpha value */
+ LTDC_LAYER(hltdc, LayerIdx)->CACR &= ~(LTDC_LxCACR_CONSTA);
+ LTDC_LAYER(hltdc, LayerIdx)->CACR = (pLayerCfg->Alpha);
+
+ /* Specifies the blending factors */
+ LTDC_LAYER(hltdc, LayerIdx)->BFCR &= ~(LTDC_LxBFCR_BF2 | LTDC_LxBFCR_BF1);
+ LTDC_LAYER(hltdc, LayerIdx)->BFCR = (pLayerCfg->BlendingFactor1 | pLayerCfg->BlendingFactor2);
+
+ /* Configures the color frame buffer start address */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD);
+ LTDC_LAYER(hltdc, LayerIdx)->CFBAR = (pLayerCfg->FBStartAdress);
+
+ if(pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
+ {
+ tmp = 4U;
+ }
+ else if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB888)
+ {
+ tmp = 3U;
+ }
+ else if((pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
+ (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \
+ (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_AL88))
+ {
+ tmp = 2U;
+ }
+ else
+ {
+ tmp = 1U;
+ }
+
+ /* Configures the color frame buffer pitch in byte */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~(LTDC_LxCFBLR_CFBLL | LTDC_LxCFBLR_CFBP);
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLR = (((pLayerCfg->ImageWidth * tmp) << 16U) | (((pLayerCfg->WindowX1 - pLayerCfg->WindowX0) * tmp) + 3U));
+
+ /* Configures the frame buffer line number */
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLNR &= ~(LTDC_LxCFBLNR_CFBLNBR);
+ LTDC_LAYER(hltdc, LayerIdx)->CFBLNR = (pLayerCfg->ImageHeight);
+
+ /* Enable LTDC_Layer by setting LEN bit */
+ LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_LEN;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_LTDC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,660 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of LTDC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LTDC_H
+#define __STM32F4xx_HAL_LTDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup LTDC LTDC
+ * @brief LTDC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Types LTDC Exported Types
+ * @{
+ */
+#define MAX_LAYER 2
+
+/**
+ * @brief LTDC color structure definition
+ */
+typedef struct
+{
+ uint8_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Reserved; /*!< Reserved 0xFF */
+} LTDC_ColorTypeDef;
+
+/**
+ * @brief LTDC Init structure definition
+ */
+typedef struct
+{
+ uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity.
+ This parameter can be one value of @ref LTDC_HS_POLARITY */
+
+ uint32_t VSPolarity; /*!< configures the vertical synchronization polarity.
+ This parameter can be one value of @ref LTDC_VS_POLARITY */
+
+ uint32_t DEPolarity; /*!< configures the data enable polarity.
+ This parameter can be one of value of @ref LTDC_DE_POLARITY */
+
+ uint32_t PCPolarity; /*!< configures the pixel clock polarity.
+ This parameter can be one of value of @ref LTDC_PC_POLARITY */
+
+ uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t VerticalSync; /*!< configures the number of Vertical synchronization height.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width.
+ This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch height.
+ This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedActiveW; /*!< configures the accumulated active width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedActiveH; /*!< configures the accumulated active height.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
+
+ uint32_t TotalWidth; /*!< configures the total width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
+
+ uint32_t TotalHeigh; /*!< configures the total height.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */
+} LTDC_InitTypeDef;
+
+/**
+ * @brief LTDC Layer structure definition
+ */
+typedef struct
+{
+ uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowY0; /*!< Configures the Window vertical Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ uint32_t WindowY1; /*!< Configures the Window vertical Stop Position.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x7FF. */
+
+ uint32_t PixelFormat; /*!< Specifies the pixel format.
+ This parameter can be one of value of @ref LTDC_Pixelformat */
+
+ uint32_t Alpha; /*!< Specifies the constant alpha used for blending.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Alpha0; /*!< Configures the default alpha value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t BlendingFactor1; /*!< Select the blending factor 1.
+ This parameter can be one of value of @ref LTDC_BlendingFactor1 */
+
+ uint32_t BlendingFactor2; /*!< Select the blending factor 2.
+ This parameter can be one of value of @ref LTDC_BlendingFactor2 */
+
+ uint32_t FBStartAdress; /*!< Configures the color frame buffer address */
+
+ uint32_t ImageWidth; /*!< Configures the color frame buffer line length.
+ This parameter must be a number between Min_Data = 0x0000U and Max_Data = 0x1FFF. */
+
+ uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */
+} LTDC_LayerCfgTypeDef;
+
+/**
+ * @brief HAL LTDC State structures definition
+ */
+typedef enum
+{
+ HAL_LTDC_STATE_RESET = 0x00U, /*!< LTDC not yet initialized or disabled */
+ HAL_LTDC_STATE_READY = 0x01U, /*!< LTDC initialized and ready for use */
+ HAL_LTDC_STATE_BUSY = 0x02U, /*!< LTDC internal process is ongoing */
+ HAL_LTDC_STATE_TIMEOUT = 0x03U, /*!< LTDC Timeout state */
+ HAL_LTDC_STATE_ERROR = 0x04U /*!< LTDC state error */
+}HAL_LTDC_StateTypeDef;
+
+/**
+ * @brief LTDC handle Structure definition
+ */
+typedef struct
+{
+ LTDC_TypeDef *Instance; /*!< LTDC Register base address */
+
+ LTDC_InitTypeDef Init; /*!< LTDC parameters */
+
+ LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< LTDC Lock */
+
+ __IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */
+
+ __IO uint32_t ErrorCode; /*!< LTDC Error code */
+
+} LTDC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Constants LTDC Exported Constants
+ * @{
+ */
+
+/** @defgroup LTDC_Error_Code LTDC Error Code
+ * @{
+ */
+#define HAL_LTDC_ERROR_NONE ((uint32_t)0x00000000U) /*!< LTDC No error */
+#define HAL_LTDC_ERROR_TE ((uint32_t)0x00000001U) /*!< LTDC Transfer error */
+#define HAL_LTDC_ERROR_FU ((uint32_t)0x00000002U) /*!< LTDC FIFO Underrun */
+#define HAL_LTDC_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< LTDC Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY
+ * @{
+ */
+#define LTDC_HSPOLARITY_AL ((uint32_t)0x00000000U) /*!< Horizontal Synchronization is active low. */
+#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY
+ * @{
+ */
+#define LTDC_VSPOLARITY_AL ((uint32_t)0x00000000U) /*!< Vertical Synchronization is active low. */
+#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY
+ * @{
+ */
+#define LTDC_DEPOLARITY_AL ((uint32_t)0x00000000U) /*!< Data Enable, is active low. */
+#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY
+ * @{
+ */
+#define LTDC_PCPOLARITY_IPC ((uint32_t)0x00000000U) /*!< input pixel clock. */
+#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_SYNC LTDC SYNC
+ * @{
+ */
+#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16U) /*!< Horizontal synchronization width. */
+#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization height. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR
+ * @{
+ */
+#define LTDC_COLOR ((uint32_t)0x000000FFU) /*!< Color mask */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR1_CA ((uint32_t)0x00000400U) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR1_PAxCA ((uint32_t)0x00000600U) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR2_CA ((uint32_t)0x00000005U) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR2_PAxCA ((uint32_t)0x00000007U) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Pixelformat LTDC Pixel format
+ * @{
+ */
+#define LTDC_PIXEL_FORMAT_ARGB8888 ((uint32_t)0x00000000U) /*!< ARGB8888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB888 ((uint32_t)0x00000001U) /*!< RGB888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB565 ((uint32_t)0x00000002U) /*!< RGB565 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB1555 ((uint32_t)0x00000003U) /*!< ARGB1555 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB4444 ((uint32_t)0x00000004U) /*!< ARGB4444 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_L8 ((uint32_t)0x00000005U) /*!< L8 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL44 ((uint32_t)0x00000006U) /*!< AL44 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL88 ((uint32_t)0x00000007U) /*!< AL88 LTDC pixel format */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Alpha LTDC Alpha
+ * @{
+ */
+#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Cte Alpha mask */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_LAYER_Config LTDC LAYER Config
+ * @{
+ */
+#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16U) /*!< LTDC Layer stop position */
+#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */
+
+#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */
+#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Interrupts LTDC Interrupts
+ * @{
+ */
+#define LTDC_IT_LI LTDC_IER_LIE
+#define LTDC_IT_FU LTDC_IER_FUIE
+#define LTDC_IT_TE LTDC_IER_TERRIE
+#define LTDC_IT_RR LTDC_IER_RRIE
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Flag LTDC Flag
+ * @{
+ */
+#define LTDC_FLAG_LI LTDC_ISR_LIF
+#define LTDC_FLAG_FU LTDC_ISR_FUIF
+#define LTDC_FLAG_TE LTDC_ISR_TERRIF
+#define LTDC_FLAG_RR LTDC_ISR_RRIF
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Reload_Type LTDC Reload Type
+ * @{
+ */
+#define LTDC_RELOAD_IMMEDIATE LTDC_SRCR_IMR /*!< Immediate Reload */
+#define LTDC_RELOAD_VERTICAL_BLANKING LTDC_SRCR_VBR /*!< Vertical Blanking Reload */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Macros LTDC Exported Macros
+ * @{
+ */
+
+/** @brief Reset LTDC handle state
+ * @param __HANDLE__: specifies the LTDC handle.
+ * @retval None
+ */
+#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
+
+/**
+ * @brief Enable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
+
+/**
+ * @brief Disable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
+
+/**
+ * @brief Enable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be enabled
+ * This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Disable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be disabled
+ * This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Reload Layer Configuration.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified LTDC interrupt has occurred or not.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval The state of INTERRUPT (SET or RESET).
+ */
+#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Include LTDC HAL Extension module */
+#include "stm32f4xx_hal_ltdc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup LTDC_Exported_Functions
+ * @{
+ */
+/** @addtogroup LTDC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/** @addtogroup LTDC_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/** @addtogroup LTDC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_Relaod(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType);
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+
+/**
+ * @}
+ */
+
+/** @addtogroup LTDC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
+uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Types LTDC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Variables LTDC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Constants LTDC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Macros LTDC Private Macros
+ * @{
+ */
+#define LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)((uint32_t)(((uint32_t)((__HANDLE__)->Instance)) + 0x84U + (0x80U * (__LAYER__)))))
+#define IS_LTDC_LAYER(LAYER) ((LAYER) <= MAX_LAYER)
+#define IS_LTDC_HSPOL(HSPOL) (((HSPOL) == LTDC_HSPOLARITY_AL) || \
+ ((HSPOL) == LTDC_HSPOLARITY_AH))
+#define IS_LTDC_VSPOL(VSPOL) (((VSPOL) == LTDC_VSPOLARITY_AL) || \
+ ((VSPOL) == LTDC_VSPOLARITY_AH))
+#define IS_LTDC_DEPOL(DEPOL) (((DEPOL) == LTDC_DEPOLARITY_AL) || \
+ ((DEPOL) == LTDC_DEPOLARITY_AH))
+#define IS_LTDC_PCPOL(PCPOL) (((PCPOL) == LTDC_PCPOLARITY_IPC) || \
+ ((PCPOL) == LTDC_PCPOLARITY_IIPC))
+#define IS_LTDC_HSYNC(HSYNC) ((HSYNC) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_VSYNC(VSYNC) ((VSYNC) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AHBP(AHBP) ((AHBP) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AVBP(AVBP) ((AVBP) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AAW(AAW) ((AAW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AAH(AAH) ((AAH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_TOTALW(TOTALW) ((TOTALW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_TOTALH(TOTALH) ((TOTALH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_BLUEVALUE(BBLUE) ((BBLUE) <= LTDC_COLOR)
+#define IS_LTDC_GREENVALUE(BGREEN) ((BGREEN) <= LTDC_COLOR)
+#define IS_LTDC_REDVALUE(BRED) ((BRED) <= LTDC_COLOR)
+#define IS_LTDC_BLENDING_FACTOR1(BlendingFactor1) (((BlendingFactor1) == LTDC_BLENDING_FACTOR1_CA) || \
+ ((BlendingFactor1) == LTDC_BLENDING_FACTOR1_PAxCA))
+#define IS_LTDC_BLENDING_FACTOR2(BlendingFactor2) (((BlendingFactor2) == LTDC_BLENDING_FACTOR2_CA) || \
+ ((BlendingFactor2) == LTDC_BLENDING_FACTOR2_PAxCA))
+#define IS_LTDC_PIXEL_FORMAT(Pixelformat) (((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB8888) || ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB888) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB565) || ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB4444) || ((Pixelformat) == LTDC_PIXEL_FORMAT_L8) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_AL44) || ((Pixelformat) == LTDC_PIXEL_FORMAT_AL88))
+#define IS_LTDC_ALPHA(ALPHA) ((ALPHA) <= LTDC_ALPHA)
+#define IS_LTDC_HCONFIGST(HCONFIGST) ((HCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_HCONFIGSP(HCONFIGSP) ((HCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_VCONFIGST(VCONFIGST) ((VCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_VCONFIGSP(VCONFIGSP) ((VCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_CFBP(CFBP) ((CFBP) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLL(CFBLL) ((CFBLL) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLNBR(CFBLNBR) ((CFBLNBR) <= LTDC_LINE_NUMBER)
+#define IS_LTDC_LIPOS(LIPOS) ((LIPOS) <= 0x7FFU)
+#define IS_LTDC_RELAOD(RELOADTYPE) (((RELOADTYPE) == LTDC_RELOAD_IMMEDIATE) || ((RELOADTYPE) == LTDC_SRCR_VBR))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Functions LTDC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LTDC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,164 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief LTDC Extension HAL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup LTDCEx LTDCEx
+ * @brief LTDC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup LTDCEx_Exported_Functions LTDC Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup LTDCEx_Exported_Functions_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the LTDC
+
+@endverbatim
+ * @{
+ */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Retrieve common parameters from DSI Video mode configuration structure
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param VidCfg: pointer to a DSI_VidCfgTypeDef structure that contains
+ * the DSI video mode configuration parameters
+ * @note The implementation of this function is taking into account the LTDC
+ * polarities inversion as described in the current LTDC specification
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_StructInitFromVideoConfig(LTDC_HandleTypeDef* hltdc, DSI_VidCfgTypeDef *VidCfg)
+{
+ /* Retrieve signal polarities from DSI */
+
+ /* The following polarities are inverted:
+ LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH
+ LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH
+ LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/
+
+ /* Note 1 : Code in line w/ Current LTDC specification */
+ hltdc->Init.DEPolarity = (VidCfg->DEPolarity == DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
+ hltdc->Init.VSPolarity = (VidCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH;
+ hltdc->Init.HSPolarity = (VidCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH;
+
+ /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
+ /* hltdc->Init.DEPolarity = VidCfg->DEPolarity << 29;
+ hltdc->Init.VSPolarity = VidCfg->VSPolarity << 29;
+ hltdc->Init.HSPolarity = VidCfg->HSPolarity << 29; */
+
+ /* Retrieve vertical timing parameters from DSI */
+ hltdc->Init.VerticalSync = VidCfg->VerticalSyncActive - 1U;
+ hltdc->Init.AccumulatedVBP = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch - 1U;
+ hltdc->Init.AccumulatedActiveH = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + VidCfg->VerticalActive - 1U;
+ hltdc->Init.TotalHeigh = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + VidCfg->VerticalActive + VidCfg->VerticalFrontPorch - 1U;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Retrieve common parameters from DSI Adapted command mode configuration structure
+ * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+ * the configuration information for the LTDC.
+ * @param CmdCfg: pointer to a DSI_CmdCfgTypeDef structure that contains
+ * the DSI command mode configuration parameters
+ * @note The implementation of this function is taking into account the LTDC
+ * polarities inversion as described in the current LTDC specification
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LTDC_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef* hltdc, DSI_CmdCfgTypeDef *CmdCfg)
+{
+ /* Retrieve signal polarities from DSI */
+
+ /* The following polarities are inverted:
+ LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH
+ LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH
+ LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/
+
+ /* Note 1 : Code in line w/ Current LTDC specification */
+ hltdc->Init.DEPolarity = (CmdCfg->DEPolarity == DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
+ hltdc->Init.VSPolarity = (CmdCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH;
+ hltdc->Init.HSPolarity = (CmdCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH;
+
+ /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
+ /* hltdc->Init.DEPolarity = CmdCfg->DEPolarity << 29;
+ hltdc->Init.VSPolarity = CmdCfg->VSPolarity << 29;
+ hltdc->Init.HSPolarity = CmdCfg->HSPolarity << 29; */
+
+ return HAL_OK;
+}
+#endif /* STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DCMI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_ltdc_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,151 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of LTDC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LTDC_EX_H
+#define __STM32F4xx_HAL_LTDC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+#include "stm32f4xx_hal_dsi.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup LTDCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup LTDCEx_Exported_Constants LTDCEx Exported Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LTDCEx_Exported_Macros LTDC Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup LTDCEx_Exported_Functions LTDC Extended Exported Functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_LTDC_StructInitFromVideoConfig(LTDC_HandleTypeDef* hltdc, DSI_VidCfgTypeDef *VidCfg);
+HAL_StatusTypeDef HAL_LTDC_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef* hltdc, DSI_CmdCfgTypeDef *CmdCfg);
+/**
+ * @}
+ */
+
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Types LTDCEx Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Variables LTDCEx Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Constants LTDCEx Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Macros LTDCEx Private Macros
+ * @{
+ */
+
+ /**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LTDCEx_Private_Functions LTDCEx Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LTDC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_msp_template.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_msp_template.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,119 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_msp_template.c
+ * @author MCD Application Team
+ * @version V1.4.1
+ * @date 09-October-2015
+ * @brief This file contains the HAL System and Peripheral (PPP) MSP initialization
+ * and de-initialization functions.
+ * It should be copied to the application folder and renamed into 'stm32f4xx_hal_msp.c'.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL_MSP HAL MSP
+ * @brief HAL MSP module.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_MSP_Private_Functions HAL MSP Private Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the Global MSP.
+ * @note This function is called from HAL_Init() function to perform system
+ * level initialization (GPIOs, clock, DMA, interrupt).
+ * @retval None
+ */
+void HAL_MspInit(void)
+{
+
+}
+
+/**
+ * @brief DeInitializes the Global MSP.
+ * @note This functiona is called from HAL_DeInit() function to perform system
+ * level de-initialization (GPIOs, clock, DMA, interrupt).
+ * @retval None
+ */
+void HAL_MspDeInit(void)
+{
+
+}
+
+/**
+ * @brief Initializes the PPP MSP.
+ * @note This functiona is called from HAL_PPP_Init() function to perform
+ * peripheral(PPP) system level initialization (GPIOs, clock, DMA, interrupt)
+ * @retval None
+ */
+void HAL_PPP_MspInit(void)
+{
+
+}
+
+/**
+ * @brief DeInitializes the PPP MSP.
+ * @note This functiona is called from HAL_PPP_DeInit() function to perform
+ * peripheral(PPP) system level de-initialization (GPIOs, clock, DMA, interrupt)
+ * @retval None
+ */
+void HAL_PPP_MspDeInit(void)
+{
+
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1130 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nand.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief NAND HAL module driver.
+ * This file provides a generic firmware to drive NAND memories mounted
+ * as external device.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control NAND flash memories. It uses the FMC/FSMC layer functions to interface
+ with NAND devices. This driver is used as follows:
+
+ (+) NAND flash memory configuration sequence using the function HAL_NAND_Init()
+ with control and timing parameters for both common and attribute spaces.
+
+ (+) Read NAND flash memory maker and device IDs using the function
+ HAL_NAND_Read_ID(). The read information is stored in the NAND_ID_TypeDef
+ structure declared by the function caller.
+
+ (+) Access NAND flash memory by read/write operations using the functions
+ HAL_NAND_Read_Page()/HAL_NAND_Read_SpareArea(), HAL_NAND_Write_Page()/HAL_NAND_Write_SpareArea()
+ to read/write page(s)/spare area(s). These functions use specific device
+ information (Block, page size..) predefined by the user in the HAL_NAND_Info_TypeDef
+ structure. The read/write address information is contained by the Nand_Address_Typedef
+ structure passed as parameter.
+
+ (+) Perform NAND flash Reset chip operation using the function HAL_NAND_Reset().
+
+ (+) Perform NAND flash erase block operation using the function HAL_NAND_Erase_Block().
+ The erase block address information is contained in the Nand_Address_Typedef
+ structure passed as parameter.
+
+ (+) Read the NAND flash status operation using the function HAL_NAND_Read_Status().
+
+ (+) You can also control the NAND device by calling the control APIs HAL_NAND_ECC_Enable()/
+ HAL_NAND_ECC_Disable() to respectively enable/disable the ECC code correction
+ feature or the function HAL_NAND_GetECC() to get the ECC correction code.
+
+ (+) You can monitor the NAND device HAL state by calling the function
+ HAL_NAND_GetState()
+
+ [..]
+ (@) This driver is a set of generic APIs which handle standard NAND flash operations.
+ If a NAND flash device contains different operations and/or implementations,
+ it should be implemented separately.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+
+#ifdef HAL_NAND_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @defgroup NAND NAND
+ * @brief NAND HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup NAND_Private_Constants NAND Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup NAND_Private_Macros NAND Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup NAND_Exported_Functions NAND Exported Functions
+ * @{
+ */
+
+/** @defgroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NAND Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize
+ the NAND memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Perform NAND memory Initialization sequence
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param ComSpace_Timing: pointer to Common space timing structure
+ * @param AttSpace_Timing: pointer to Attribute space timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing)
+{
+ /* Check the NAND handle state */
+ if(hnand == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hnand->State == HAL_NAND_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hnand->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_NAND_MspInit(hnand);
+ }
+
+ /* Initialize NAND control Interface */
+ FMC_NAND_Init(hnand->Instance, &(hnand->Init));
+
+ /* Initialize NAND common space timing Interface */
+ FMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank);
+
+ /* Initialize NAND attribute space timing Interface */
+ FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank);
+
+ /* Enable the NAND device */
+ __FMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank);
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Perform NAND memory De-Initialization sequence
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand)
+{
+ /* Initialize the low level hardware (MSP) */
+ HAL_NAND_MspDeInit(hnand);
+
+ /* Configure the NAND registers with their reset values */
+ FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank);
+
+ /* Reset the NAND controller state */
+ hnand->State = HAL_NAND_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NAND MSP Init
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval None
+ */
+__weak void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnand);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NAND_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief NAND MSP DeInit
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval None
+ */
+__weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnand);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NAND_MspDeInit could be implemented in the user file
+ */
+}
+
+
+/**
+ * @brief This function handles NAND device interrupt request.
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+*/
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand)
+{
+ /* Check NAND interrupt Rising edge flag */
+ if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE))
+ {
+ /* NAND interrupt callback*/
+ HAL_NAND_ITCallback(hnand);
+
+ /* Clear NAND interrupt Rising edge pending bit */
+ __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE);
+ }
+
+ /* Check NAND interrupt Level flag */
+ if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL))
+ {
+ /* NAND interrupt callback*/
+ HAL_NAND_ITCallback(hnand);
+
+ /* Clear NAND interrupt Level pending bit */
+ __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL);
+ }
+
+ /* Check NAND interrupt Falling edge flag */
+ if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE))
+ {
+ /* NAND interrupt callback*/
+ HAL_NAND_ITCallback(hnand);
+
+ /* Clear NAND interrupt Falling edge pending bit */
+ __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE);
+ }
+
+ /* Check NAND interrupt FIFO empty flag */
+ if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT))
+ {
+ /* NAND interrupt callback*/
+ HAL_NAND_ITCallback(hnand);
+
+ /* Clear NAND interrupt FIFO empty pending bit */
+ __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT);
+ }
+
+}
+
+/**
+ * @brief NAND interrupt feature callback
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval None
+ */
+__weak void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnand);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NAND_ITCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NAND_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NAND Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the NAND
+ memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read the NAND memory electronic signature
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pNAND_ID: NAND ID structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID)
+{
+ __IO uint32_t data = 0U;
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Send Read ID command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_READID;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+
+ /* Read the electronic signature from NAND flash */
+ data = *(__IO uint32_t *)deviceaddress;
+
+ /* Return the data read */
+ pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data);
+ pNAND_ID->Device_Id = ADDR_2ND_CYCLE(data);
+ pNAND_ID->Third_Id = ADDR_3RD_CYCLE(data);
+ pNAND_ID->Fourth_Id = ADDR_4TH_CYCLE(data);
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NAND memory reset
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Send NAND reset command */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFFU;
+
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Read Page(s) from NAND memory block
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @param pBuffer : pointer to destination read buffer
+ * @param NumPageToRead : number of pages to read from block
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead)
+{
+ __IO uint32_t index = 0U;
+ uint32_t deviceaddress = 0U, size = 0U, numpagesread = 0U, addressstatus = NAND_VALID_ADDRESS;
+ NAND_AddressTypeDef nandaddress;
+ uint32_t addressoffset = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Save the content of pAddress as it will be modified */
+ nandaddress.Block = pAddress->Block;
+ nandaddress.Page = pAddress->Page;
+ nandaddress.Zone = pAddress->Zone;
+
+ /* Page(s) read loop */
+ while((NumPageToRead != 0U) && (addressstatus == NAND_VALID_ADDRESS))
+ {
+ /* update the buffer size */
+ size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpagesread);
+
+ /* Get the address offset */
+ addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+ /* Send read page command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
+
+ /* Get Data into Buffer */
+ for(; index < size; index++)
+ {
+ *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
+ }
+
+ /* Increment read pages number */
+ numpagesread++;
+
+ /* Decrement pages to read */
+ NumPageToRead--;
+
+ /* Increment the NAND address */
+ addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Write Page(s) to NAND memory block
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @param pBuffer : pointer to source buffer to write
+ * @param NumPageToWrite : number of pages to write to block
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite)
+{
+ __IO uint32_t index = 0U;
+ uint32_t tickstart = 0U;
+ uint32_t deviceaddress = 0U , size = 0U, numpageswritten = 0U, addressstatus = NAND_VALID_ADDRESS;
+ NAND_AddressTypeDef nandaddress;
+ uint32_t addressoffset = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Save the content of pAddress as it will be modified */
+ nandaddress.Block = pAddress->Block;
+ nandaddress.Page = pAddress->Page;
+ nandaddress.Zone = pAddress->Zone;
+
+ /* Page(s) write loop */
+ while((NumPageToWrite != 0U) && (addressstatus == NAND_VALID_ADDRESS))
+ {
+ /* update the buffer size */
+ size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpageswritten);
+
+ /* Get the address offset */
+ addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+ /* Send write page command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+ }
+
+ /* Write data to memory */
+ for(; index < size; index++)
+ {
+ *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Read status until NAND is ready */
+ while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+ {
+ if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Increment written pages number */
+ numpageswritten++;
+
+ /* Decrement pages to write */
+ NumPageToWrite--;
+
+ /* Increment the NAND address */
+ addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read Spare area(s) from NAND memory
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @param pBuffer: pointer to source buffer to write
+ * @param NumSpareAreaToRead: Number of spare area to read
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead)
+{
+ __IO uint32_t index = 0U;
+ uint32_t deviceaddress = 0U, size = 0U, num_spare_area_read = 0U, addressstatus = NAND_VALID_ADDRESS;
+ NAND_AddressTypeDef nandaddress;
+ uint32_t addressoffset = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Save the content of pAddress as it will be modified */
+ nandaddress.Block = pAddress->Block;
+ nandaddress.Page = pAddress->Page;
+ nandaddress.Zone = pAddress->Zone;
+
+ /* Spare area(s) read loop */
+ while((NumSpareAreaToRead != 0U) && (addressstatus == NAND_VALID_ADDRESS))
+ {
+ /* update the buffer size */
+ size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_read);
+
+ /* Get the address offset */
+ addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+ /* Send read spare area command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
+
+ /* Get Data into Buffer */
+ for(; index < size; index++)
+ {
+ *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
+ }
+
+ /* Increment read spare areas number */
+ num_spare_area_read++;
+
+ /* Decrement spare areas to read */
+ NumSpareAreaToRead--;
+
+ /* Increment the NAND address */
+ addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Write Spare area(s) to NAND memory
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @param pBuffer : pointer to source buffer to write
+ * @param NumSpareAreaTowrite : number of spare areas to write to block
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
+{
+ __IO uint32_t index = 0U;
+ uint32_t tickstart = 0U;
+ uint32_t deviceaddress = 0U, size = 0U, num_spare_area_written = 0U, addressstatus = NAND_VALID_ADDRESS;
+ NAND_AddressTypeDef nandaddress;
+ uint32_t addressoffset = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the FMC_NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Save the content of pAddress as it will be modified */
+ nandaddress.Block = pAddress->Block;
+ nandaddress.Page = pAddress->Page;
+ nandaddress.Zone = pAddress->Zone;
+
+ /* Spare area(s) write loop */
+ while((NumSpareAreaTowrite != 0U) && (addressstatus == NAND_VALID_ADDRESS))
+ {
+ /* update the buffer size */
+ size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_written);
+
+ /* Get the address offset */
+ addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+ /* Send write Spare area command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+ }
+
+ /* Write data to memory */
+ for(; index < size; index++)
+ {
+ *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Read status until NAND is ready */
+ while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+ {
+ if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Increment written spare areas number */
+ num_spare_area_written++;
+
+ /* Decrement spare areas to write */
+ NumSpareAreaTowrite--;
+
+ /* Increment the NAND address */
+ addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NAND memory Block erase
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress : pointer to NAND address structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+{
+ uint32_t deviceaddress = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnand);
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Send Erase block command sequence */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0;
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+
+ /* for 512 and 1 GB devices, 4th cycle is required */
+ if(hnand->Info.BlockNbr >= 1024U)
+ {
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+ }
+
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1;
+
+ /* Update the NAND controller state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Read status until NAND is ready */
+ while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+ {
+ if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnand);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NAND memory read status
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval NAND status
+ */
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand)
+{
+ uint32_t data = 0U;
+ uint32_t deviceaddress = 0U;
+
+ /* Identify the device address */
+ if(hnand->Init.NandBank == FMC_NAND_BANK2)
+ {
+ deviceaddress = NAND_DEVICE1;
+ }
+ else
+ {
+ deviceaddress = NAND_DEVICE2;
+ }
+
+ /* Send Read status operation command */
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS;
+
+ /* Read status register data */
+ data = *(__IO uint8_t *)deviceaddress;
+
+ /* Return the status */
+ if((data & NAND_ERROR) == NAND_ERROR)
+ {
+ return NAND_ERROR;
+ }
+ else if((data & NAND_READY) == NAND_READY)
+ {
+ return NAND_READY;
+ }
+
+ return NAND_BUSY;
+}
+
+/**
+ * @brief Increment the NAND memory address
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param pAddress: pointer to NAND address structure
+ * @retval The new status of the increment address operation. It can be:
+ * - NAND_VALID_ADDRESS: When the new address is valid address
+ * - NAND_INVALID_ADDRESS: When the new address is invalid address
+ */
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+{
+ uint32_t status = NAND_VALID_ADDRESS;
+
+ /* Increment page address */
+ pAddress->Page++;
+
+ /* Check NAND address is valid */
+ if(pAddress->Page == hnand->Info.BlockSize)
+ {
+ pAddress->Page = 0U;
+ pAddress->Block++;
+
+ if(pAddress->Block == hnand->Info.ZoneSize)
+ {
+ pAddress->Block = 0U;
+ pAddress->Zone++;
+
+ if(pAddress->Zone == (hnand->Info.ZoneSize/ hnand->Info.BlockNbr))
+ {
+ status = NAND_INVALID_ADDRESS;
+ }
+ }
+ }
+
+ return (status);
+}
+/**
+ * @}
+ */
+
+/** @defgroup NAND_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NAND Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the NAND interface.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Enables dynamically NAND ECC feature.
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand)
+{
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Enable ECC feature */
+ FMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank);
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand)
+{
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Disable ECC feature */
+ FMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank);
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically NAND ECC feature.
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @param ECCval: pointer to ECC value
+ * @param Timeout: maximum timeout to wait
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the NAND controller state */
+ if(hnand->State == HAL_NAND_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_BUSY;
+
+ /* Get NAND ECC value */
+ status = FMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout);
+
+ /* Update the NAND state */
+ hnand->State = HAL_NAND_STATE_READY;
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NAND State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the NAND controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the NAND state
+ * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
+ * the configuration information for NAND module.
+ * @retval HAL state
+ */
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand)
+{
+ return hnand->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nand.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,318 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nand.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of NAND HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NAND_H
+#define __STM32F4xx_HAL_NAND_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NAND
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Types NAND Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL NAND State structures definition
+ */
+typedef enum
+{
+ HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */
+ HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */
+ HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */
+ HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */
+}HAL_NAND_StateTypeDef;
+
+/**
+ * @brief NAND Memory electronic signature Structure definition
+ */
+typedef struct
+{
+ /*<! NAND memory electronic signature maker and device IDs */
+
+ uint8_t Maker_Id;
+
+ uint8_t Device_Id;
+
+ uint8_t Third_Id;
+
+ uint8_t Fourth_Id;
+}NAND_IDTypeDef;
+
+/**
+ * @brief NAND Memory address Structure definition
+ */
+typedef struct
+{
+ uint16_t Page; /*!< NAND memory Page address */
+
+ uint16_t Zone; /*!< NAND memory Zone address */
+
+ uint16_t Block; /*!< NAND memory Block address */
+
+}NAND_AddressTypeDef;
+
+/**
+ * @brief NAND Memory info Structure definition
+ */
+typedef struct
+{
+ uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in K. bytes */
+
+ uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in K. bytes */
+
+ uint32_t BlockSize; /*!< NAND memory block size number of pages */
+
+ uint32_t BlockNbr; /*!< NAND memory number of blocks */
+
+ uint32_t ZoneSize; /*!< NAND memory zone size measured in number of blocks */
+}NAND_InfoTypeDef;
+
+/**
+ * @brief NAND handle Structure definition
+ */
+typedef struct
+{
+ FMC_NAND_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NAND locking object */
+
+ __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */
+
+ NAND_InfoTypeDef Info; /*!< NAND characteristic information structure */
+}NAND_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Macros NAND Exported Macros
+ * @{
+ */
+
+/** @brief Reset NAND handle state
+ * @param __HANDLE__: specifies the NAND handle.
+ * @retval None
+ */
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NAND_Exported_Functions NAND Exported Functions
+ * @{
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
+void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions
+ * @{
+ */
+
+/* IO operation functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* NAND Control functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+/* NAND State functions *******************************************************/
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NAND_Private_Constants NAND Private Constants
+ * @{
+ */
+#define NAND_DEVICE1 ((uint32_t)0x70000000U)
+#define NAND_DEVICE2 ((uint32_t)0x80000000U)
+#define NAND_WRITE_TIMEOUT ((uint32_t)0x01000000U)
+
+#define CMD_AREA ((uint32_t)(1U<<16U)) /* A16 = CLE high */
+#define ADDR_AREA ((uint32_t)(1U<<17U)) /* A17 = ALE high */
+
+#define NAND_CMD_AREA_A ((uint8_t)0x00U)
+#define NAND_CMD_AREA_B ((uint8_t)0x01U)
+#define NAND_CMD_AREA_C ((uint8_t)0x50U)
+#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30U)
+
+#define NAND_CMD_WRITE0 ((uint8_t)0x80U)
+#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10U)
+#define NAND_CMD_ERASE0 ((uint8_t)0x60U)
+#define NAND_CMD_ERASE1 ((uint8_t)0xD0U)
+#define NAND_CMD_READID ((uint8_t)0x90U)
+#define NAND_CMD_STATUS ((uint8_t)0x70U)
+#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7AU)
+#define NAND_CMD_RESET ((uint8_t)0xFFU)
+
+/* NAND memory status */
+#define NAND_VALID_ADDRESS ((uint32_t)0x00000100U)
+#define NAND_INVALID_ADDRESS ((uint32_t)0x00000200U)
+#define NAND_TIMEOUT_ERROR ((uint32_t)0x00000400U)
+#define NAND_BUSY ((uint32_t)0x00000000U)
+#define NAND_ERROR ((uint32_t)0x00000001U)
+#define NAND_READY ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NAND_Private_Macros NAND Private Macros
+ * @{
+ */
+
+/**
+ * @brief NAND memory address computation.
+ * @param __ADDRESS__: NAND memory address.
+ * @param __HANDLE__: NAND handle.
+ * @retval NAND Raw address value
+ */
+#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
+ (((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize)))
+
+/**
+ * @brief NAND memory address cycling.
+ * @param __ADDRESS__: NAND memory address.
+ * @retval NAND address cycling value.
+ */
+#define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */
+#define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8U) /* 2nd addressing cycle */
+#define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16U) /* 3rd addressing cycle */
+#define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24U) /* 4th addressing cycle */
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NAND_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1035 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nor.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief NOR HAL module driver.
+ * This file provides a generic firmware to drive NOR memories mounted
+ * as external device.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control NOR flash memories. It uses the FMC/FSMC layer functions to interface
+ with NOR devices. This driver is used as follows:
+
+ (+) NOR flash memory configuration sequence using the function HAL_NOR_Init()
+ with control and timing parameters for both normal and extended mode.
+
+ (+) Read NOR flash memory manufacturer code and device IDs using the function
+ HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef
+ structure declared by the function caller.
+
+ (+) Access NOR flash memory by read/write data unit operations using the functions
+ HAL_NOR_Read(), HAL_NOR_Program().
+
+ (+) Perform NOR flash erase block/chip operations using the functions
+ HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip().
+
+ (+) Read the NOR flash CFI (common flash interface) IDs using the function
+ HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef
+ structure declared by the function caller.
+
+ (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/
+ HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation
+
+ (+) You can monitor the NOR device HAL state by calling the function
+ HAL_NOR_GetState()
+ [..]
+ (@) This driver is a set of generic APIs which handle standard NOR flash operations.
+ If a NOR flash device contains different operations and/or implementations,
+ it should be implemented separately.
+
+ *** NOR HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in NOR HAL driver.
+
+ (+) NOR_WRITE : NOR memory write data to specified address
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup NOR NOR
+ * @brief NOR driver modules
+ * @{
+ */
+#ifdef HAL_NOR_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup NOR_Private_Defines NOR Private Defines
+ * @{
+ */
+
+/* Constants to define address to set to write a command */
+#define NOR_CMD_ADDRESS_FIRST (uint16_t)0x0555U
+#define NOR_CMD_ADDRESS_FIRST_CFI (uint16_t)0x0055U
+#define NOR_CMD_ADDRESS_SECOND (uint16_t)0x02AAU
+#define NOR_CMD_ADDRESS_THIRD (uint16_t)0x0555U
+#define NOR_CMD_ADDRESS_FOURTH (uint16_t)0x0555U
+#define NOR_CMD_ADDRESS_FIFTH (uint16_t)0x02AAU
+#define NOR_CMD_ADDRESS_SIXTH (uint16_t)0x0555U
+
+/* Constants to define data to program a command */
+#define NOR_CMD_DATA_READ_RESET (uint16_t)0x00F0U
+#define NOR_CMD_DATA_FIRST (uint16_t)0x00AAU
+#define NOR_CMD_DATA_SECOND (uint16_t)0x0055U
+#define NOR_CMD_DATA_AUTO_SELECT (uint16_t)0x0090U
+#define NOR_CMD_DATA_PROGRAM (uint16_t)0x00A0U
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD (uint16_t)0x0080U
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH (uint16_t)0x00AAU
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH (uint16_t)0x0055U
+#define NOR_CMD_DATA_CHIP_ERASE (uint16_t)0x0010U
+#define NOR_CMD_DATA_CFI (uint16_t)0x0098U
+
+#define NOR_CMD_DATA_BUFFER_AND_PROG (uint8_t)0x25U
+#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM (uint8_t)0x29U
+#define NOR_CMD_DATA_BLOCK_ERASE (uint8_t)0x30U
+
+/* Mask on NOR STATUS REGISTER */
+#define NOR_MASK_STATUS_DQ5 (uint16_t)0x0020U
+#define NOR_MASK_STATUS_DQ6 (uint16_t)0x0040U
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Variables NOR Private Variables
+ * @{
+ */
+
+static uint32_t uwNORMemoryDataWidth = NOR_MEMORY_8B;
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup NOR_Exported_Functions NOR Exported Functions
+ * @{
+ */
+
+/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NOR Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize
+ the NOR memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Perform the NOR memory Initialization sequence
+ * @param hnor: pointer to the NOR handle
+ * @param Timing: pointer to NOR control timing structure
+ * @param ExtTiming: pointer to NOR extended mode timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{
+ /* Check the NOR handle parameter */
+ if(hnor == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hnor->State == HAL_NOR_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hnor->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_NOR_MspInit(hnor);
+ }
+
+ /* Initialize NOR control Interface */
+ FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init));
+
+ /* Initialize NOR timing Interface */
+ FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank);
+
+ /* Initialize NOR extended mode timing Interface */
+ FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
+
+ /* Enable the NORSRAM device */
+ __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);
+
+ /* Initialize NOR Memory Data Width*/
+ if (hnor->Init.MemoryDataWidth == FMC_NORSRAM_MEM_BUS_WIDTH_8)
+ {
+ uwNORMemoryDataWidth = NOR_MEMORY_8B;
+ }
+ else
+ {
+ uwNORMemoryDataWidth = NOR_MEMORY_16B;
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Perform NOR memory De-Initialization sequence
+ * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor)
+{
+ /* De-Initialize the low level hardware (MSP) */
+ HAL_NOR_MspDeInit(hnor);
+
+ /* Configure the NOR registers with their reset values */
+ FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief NOR MSP Init
+ * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval None
+ */
+__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnor);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NOR_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief NOR MSP DeInit
+ * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @retval None
+ */
+__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnor);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NOR_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief NOR BSP Wait for Ready/Busy signal
+ * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
+ * the configuration information for NOR module.
+ * @param Timeout: Maximum timeout value
+ * @retval None
+ */
+__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hnor);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_NOR_BspWait could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### NOR Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the NOR memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read NOR flash IDs
+ * @param hnor: pointer to the NOR handle
+ * @param pNOR_ID : pointer to NOR ID structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send read ID command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT);
+
+ /* Read the NOR IDs */
+ pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS);
+ pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE1_ADDR);
+ pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE2_ADDR);
+ pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE3_ADDR);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the NOR memory to Read mode.
+ * @param hnor: pointer to the NOR handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read data from NOR memory
+ * @param hnor: pointer to the NOR handle
+ * @param pAddress: pointer to Device address
+ * @param pData : pointer to read data
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send read data command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE((uint32_t)pAddress, NOR_CMD_DATA_READ_RESET);
+
+ /* Read the data */
+ *pData = *(__IO uint32_t *)(uint32_t)pAddress;
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Program data to NOR memory
+ * @param hnor: pointer to the NOR handle
+ * @param pAddress: Device address
+ * @param pData : pointer to the data to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send program data command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
+
+ /* Write the data */
+ NOR_WRITE(pAddress, *pData);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads a half-word buffer from the NOR memory.
+ * @param hnor: pointer to the NOR handle
+ * @param uwAddress: NOR memory internal address to read from.
+ * @param pData: pointer to the buffer that receives the data read from the
+ * NOR memory.
+ * @param uwBufferSize : number of Half word to read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send read data command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(uwAddress, 0x00F0U);
+
+ /* Read buffer */
+ while( uwBufferSize > 0U)
+ {
+ *pData++ = *(__IO uint16_t *)uwAddress;
+ uwAddress += 2U;
+ uwBufferSize--;
+ }
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes a half-word buffer to the NOR memory. This function must be used
+ only with S29GL128P NOR memory.
+ * @param hnor: pointer to the NOR handle
+ * @param uwAddress: NOR memory internal start write address
+ * @param pData: pointer to source data buffer.
+ * @param uwBufferSize: Size of the buffer to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+ uint16_t * p_currentaddress = (uint16_t *)NULL;
+ uint16_t * p_endaddress = (uint16_t *)NULL;
+ uint32_t lastloadedaddress = 0U, deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Initialize variables */
+ p_currentaddress = (uint16_t*)((uint32_t)(uwAddress));
+ p_endaddress = p_currentaddress + (uwBufferSize-1U);
+ lastloadedaddress = (uint32_t)(uwAddress);
+
+ /* Issue unlock command sequence */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+
+ /* Write Buffer Load Command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, uwAddress), (uwBufferSize - 1U));
+
+ /* Load Data into NOR Buffer */
+ while(p_currentaddress <= p_endaddress)
+ {
+ /* Store last loaded address & data value (for polling) */
+ lastloadedaddress = (uint32_t)p_currentaddress;
+
+ NOR_WRITE(p_currentaddress, *pData++);
+
+ p_currentaddress ++;
+ }
+
+ NOR_WRITE((uint32_t)(lastloadedaddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Erase the specified block of the NOR memory
+ * @param hnor: pointer to the NOR handle
+ * @param BlockAddress : Block to erase address
+ * @param Address: Device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send block erase command sequence */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+ NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE);
+
+ /* Check the NOR memory status and update the controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Erase the entire NOR chip.
+ * @param hnor: pointer to the NOR handle
+ * @param Address : Device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send NOR chip erase command sequence */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE);
+
+ /* Check the NOR memory status and update the controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read NOR flash CFI IDs
+ * @param hnor: pointer to the NOR handle
+ * @param pNOR_CFI : pointer to NOR CFI IDs structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI)
+{
+ uint32_t deviceaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Check the NOR controller state */
+ if(hnor->State == HAL_NOR_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Select the NOR device address */
+ if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS1;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS2;
+ }
+ else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+ {
+ deviceaddress = NOR_MEMORY_ADRESS3;
+ }
+ else /* FMC_NORSRAM_BANK4 */
+ {
+ deviceaddress = NOR_MEMORY_ADRESS4;
+ }
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Send read CFI query command */
+ NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+
+ /* read the NOR CFI information */
+ pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS);
+ pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS);
+ pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI3_ADDRESS);
+ pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI4_ADDRESS);
+
+ /* Check the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NOR_Exported_Functions_Group3 Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NOR Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the NOR interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically NOR write operation.
+ * @param hnor: pointer to the NOR handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor)
+{
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Enable write operation */
+ FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically NOR write operation.
+ * @param hnor: pointer to the NOR handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor)
+{
+ /* Process Locked */
+ __HAL_LOCK(hnor);
+
+ /* Update the SRAM controller state */
+ hnor->State = HAL_NOR_STATE_BUSY;
+
+ /* Disable write operation */
+ FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank);
+
+ /* Update the NOR controller state */
+ hnor->State = HAL_NOR_STATE_PROTECTED;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hnor);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup NOR_Exported_Functions_Group4 State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### NOR State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the NOR controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the NOR controller state
+ * @param hnor: pointer to the NOR handle
+ * @retval NOR controller state
+ */
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor)
+{
+ return hnor->State;
+}
+
+/**
+ * @brief Returns the NOR operation status.
+ * @param hnor: pointer to the NOR handle
+ * @param Address: Device address
+ * @param Timeout: NOR programming Timeout
+ * @retval NOR_Status: The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR
+ * or HAL_NOR_STATUS_TIMEOUT
+ */
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout)
+{
+ HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING;
+ uint16_t tmpSR1 = 0U, tmpSR2 = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Poll on NOR memory Ready/Busy signal ------------------------------------*/
+ HAL_NOR_MspWait(hnor, Timeout);
+
+ /* Get the NOR memory operation status -------------------------------------*/
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ while((status != HAL_NOR_STATUS_SUCCESS ) && (status != HAL_NOR_STATUS_TIMEOUT))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ status = HAL_NOR_STATUS_TIMEOUT;
+ }
+ }
+
+ /* Read NOR status register (DQ6 and DQ5) */
+ tmpSR1 = *(__IO uint16_t *)Address;
+ tmpSR2 = *(__IO uint16_t *)Address;
+
+ /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
+ if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
+ {
+ return HAL_NOR_STATUS_SUCCESS ;
+ }
+
+ if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+ {
+ status = HAL_NOR_STATUS_ONGOING;
+ }
+
+ tmpSR1 = *(__IO uint16_t *)Address;
+ tmpSR2 = *(__IO uint16_t *)Address;
+
+ /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
+ if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
+ {
+ return HAL_NOR_STATUS_SUCCESS;
+ }
+ if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+ {
+ return HAL_NOR_STATUS_ERROR;
+ }
+ }
+
+ /* Return the operation status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx ||\
+ STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx || STM32F412Zx || STM32F412Vx */
+#endif /* HAL_NOR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_nor.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,305 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nor.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of NOR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NOR_H
+#define __STM32F4xx_HAL_NOR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NOR
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup NOR_Exported_Types NOR Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_NOR_STATE_RESET = 0x00U, /*!< NOR not yet initialized or disabled */
+ HAL_NOR_STATE_READY = 0x01U, /*!< NOR initialized and ready for use */
+ HAL_NOR_STATE_BUSY = 0x02U, /*!< NOR internal processing is ongoing */
+ HAL_NOR_STATE_ERROR = 0x03U, /*!< NOR error state */
+ HAL_NOR_STATE_PROTECTED = 0x04U /*!< NOR NORSRAM device write protected */
+}HAL_NOR_StateTypeDef;
+
+/**
+ * @brief FMC NOR Status typedef
+ */
+typedef enum
+{
+ HAL_NOR_STATUS_SUCCESS = 0U,
+ HAL_NOR_STATUS_ONGOING,
+ HAL_NOR_STATUS_ERROR,
+ HAL_NOR_STATUS_TIMEOUT
+}HAL_NOR_StatusTypeDef;
+
+/**
+ * @brief FMC NOR ID typedef
+ */
+typedef struct
+{
+ uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */
+
+ uint16_t Device_Code1;
+
+ uint16_t Device_Code2;
+
+ uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory.
+ These codes can be accessed by performing read operations with specific
+ control signals and addresses set.They can also be accessed by issuing
+ an Auto Select command */
+}NOR_IDTypeDef;
+
+/**
+ * @brief FMC NOR CFI typedef
+ */
+typedef struct
+{
+ /*!< Defines the information stored in the memory's Common flash interface
+ which contains a description of various electrical and timing parameters,
+ density information and functions supported by the memory */
+
+ uint16_t CFI_1;
+
+ uint16_t CFI_2;
+
+ uint16_t CFI_3;
+
+ uint16_t CFI_4;
+}NOR_CFITypeDef;
+
+/**
+ * @brief NOR handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NOR locking object */
+
+ __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */
+
+}NOR_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup NOR_Exported_Macros NOR Exported Macros
+ * @{
+ */
+/** @brief Reset NOR handle state
+ * @param __HANDLE__: specifies the NOR handle.
+ * @retval None
+ */
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NOR_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group3
+ * @{
+ */
+/* NOR Control functions *****************************************************/
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group4
+ * @{
+ */
+/* NOR State functions ********************************************************/
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Constants NOR Private Constants
+ * @{
+ */
+/* NOR device IDs addresses */
+#define MC_ADDRESS ((uint16_t)0x0000U)
+#define DEVICE_CODE1_ADDR ((uint16_t)0x0001U)
+#define DEVICE_CODE2_ADDR ((uint16_t)0x000EU)
+#define DEVICE_CODE3_ADDR ((uint16_t)0x000FU)
+
+/* NOR CFI IDs addresses */
+#define CFI1_ADDRESS ((uint16_t)0x0061U)
+#define CFI2_ADDRESS ((uint16_t)0x0062U)
+#define CFI3_ADDRESS ((uint16_t)0x0063U)
+#define CFI4_ADDRESS ((uint16_t)0x0064U)
+
+/* NOR operation wait timeout */
+#define NOR_TMEOUT ((uint16_t)0xFFFFU)
+
+/* NOR memory data width */
+#define NOR_MEMORY_8B ((uint8_t)0x00U)
+#define NOR_MEMORY_16B ((uint8_t)0x01U)
+
+/* NOR memory device read/write start address */
+#define NOR_MEMORY_ADRESS1 ((uint32_t)0x60000000U)
+#define NOR_MEMORY_ADRESS2 ((uint32_t)0x64000000U)
+#define NOR_MEMORY_ADRESS3 ((uint32_t)0x68000000U)
+#define NOR_MEMORY_ADRESS4 ((uint32_t)0x6C000000U)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NOR_Private_Macros NOR Private Macros
+ * @{
+ */
+/**
+ * @brief NOR memory address shifting.
+ * @param __NOR_ADDRESS__: NOR base address
+ * @param NOR_MEMORY_WIDTH: NOR memory width
+ * @param ADDRESS: NOR memory address
+ * @retval NOR shifted address value
+ */
+#define NOR_ADDR_SHIFT(__NOR_ADDRESS__, NOR_MEMORY_WIDTH, ADDRESS) (uint32_t)(((NOR_MEMORY_WIDTH) == NOR_MEMORY_16B)? ((uint32_t)((__NOR_ADDRESS__) + (2U * (ADDRESS)))):\
+ ((uint32_t)((__NOR_ADDRESS__) + (ADDRESS))))
+
+/**
+ * @brief NOR memory write data to specified address.
+ * @param ADDRESS: NOR memory address
+ * @param DATA: Data to write
+ * @retval None
+ */
+#define NOR_WRITE(ADDRESS, DATA) (*(__IO uint16_t *)((uint32_t)(ADDRESS)) = (DATA))
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NOR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,748 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pccard.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief PCCARD HAL module driver.
+ * This file provides a generic firmware to drive PCCARD memories mounted
+ * as external device.
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control PCCARD/compact flash memories. It uses the FMC/FSMC layer functions
+ to interface with PCCARD devices. This driver is used for:
+
+ (+) PCCARD/Compact Flash memory configuration sequence using the function
+ HAL_PCCARD_Init()/HAL_CF_Init() with control and timing parameters for
+ both common and attribute spaces.
+
+ (+) Read PCCARD/Compact Flash memory maker and device IDs using the function
+ HAL_PCCARD_Read_ID()/HAL_CF_Read_ID(). The read information is stored in
+ the CompactFlash_ID structure declared by the function caller.
+
+ (+) Access PCCARD/Compact Flash memory by read/write operations using the functions
+ HAL_PCCARD_Read_Sector()/ HAL_PCCARD_Write_Sector() -
+ HAL_CF_Read_Sector()/HAL_CF_Write_Sector(), to read/write sector.
+
+ (+) Perform PCCARD/Compact Flash Reset chip operation using the function
+ HAL_PCCARD_Reset()/HAL_CF_Reset.
+
+ (+) Perform PCCARD/Compact Flash erase sector operation using the function
+ HAL_PCCARD_Erase_Sector()/HAL_CF_Erase_Sector.
+
+ (+) Read the PCCARD/Compact Flash status operation using the function
+ HAL_PCCARD_ReadStatus()/HAL_CF_ReadStatus().
+
+ (+) You can monitor the PCCARD/Compact Flash device HAL state by calling
+ the function HAL_PCCARD_GetState()/HAL_CF_GetState()
+
+ [..]
+ (@) This driver is a set of generic APIs which handle standard PCCARD/compact flash
+ operations. If a PCCARD/Compact Flash device contains different operations
+ and/or implementations, it should be implemented separately.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup PCCARD PCCARD
+ * @brief PCCARD HAL module driver
+ * @{
+ */
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup PCCARD_Private_Defines PCCARD Private Defines
+ * @{
+ */
+#define PCCARD_TIMEOUT_READ_ID (uint32_t)0x0000FFFFU
+#define PCCARD_TIMEOUT_READ_WRITE_SECTOR (uint32_t)0x0000FFFFU
+#define PCCARD_TIMEOUT_ERASE_SECTOR (uint32_t)0x00000400U
+#define PCCARD_TIMEOUT_STATUS (uint32_t)0x01000000U
+
+#define PCCARD_STATUS_OK (uint8_t)0x58U
+#define PCCARD_STATUS_WRITE_OK (uint8_t)0x50U
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function ----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Functions PCCARD Exported Functions
+ * @{
+ */
+
+/** @defgroup PCCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### PCCARD Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize
+ the PCCARD memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Perform the PCCARD memory Initialization sequence
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param ComSpaceTiming: Common space timing structure
+ * @param AttSpaceTiming: Attribute space timing structure
+ * @param IOSpaceTiming: IO space timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming)
+{
+ /* Check the PCCARD controller state */
+ if(hpccard == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hpccard->State == HAL_PCCARD_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hpccard->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_PCCARD_MspInit(hpccard);
+ }
+
+ /* Initialize the PCCARD state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize PCCARD control Interface */
+ FMC_PCCARD_Init(hpccard->Instance, &(hpccard->Init));
+
+ /* Init PCCARD common space timing Interface */
+ FMC_PCCARD_CommonSpace_Timing_Init(hpccard->Instance, ComSpaceTiming);
+
+ /* Init PCCARD attribute space timing Interface */
+ FMC_PCCARD_AttributeSpace_Timing_Init(hpccard->Instance, AttSpaceTiming);
+
+ /* Init PCCARD IO space timing Interface */
+ FMC_PCCARD_IOSpace_Timing_Init(hpccard->Instance, IOSpaceTiming);
+
+ /* Enable the PCCARD device */
+ __FMC_PCCARD_ENABLE(hpccard->Instance);
+
+ /* Update the PCCARD state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Perform the PCCARD memory De-initialization sequence
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard)
+{
+ /* De-Initialize the low level hardware (MSP) */
+ HAL_PCCARD_MspDeInit(hpccard);
+
+ /* Configure the PCCARD registers with their reset values */
+ FMC_PCCARD_DeInit(hpccard->Instance);
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief PCCARD MSP Init
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval None
+ */
+__weak void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpccard);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCCARD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PCCARD MSP DeInit
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval None
+ */
+__weak void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpccard);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCCARD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCCARD_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### PCCARD Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the PCCARD memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read Compact Flash's ID.
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param CompactFlash_ID: Compact flash ID structure.
+ * @param pStatus: pointer to compact flash status
+ * @retval HAL status
+ *
+ */
+HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_READ_ID, index = 0U;
+ uint8_t status = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize the PCCARD status */
+ *pStatus = PCCARD_READY;
+
+ /* Send the Identify Command */
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = 0xECECU;
+
+ /* Read PCCARD IDs and timeout treatment */
+ do
+ {
+ /* Read the PCCARD status */
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+ timeout--;
+ }while((status != PCCARD_STATUS_OK) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+ else
+ {
+ /* Read PCCARD ID bytes */
+ for(index = 0U; index < 16U; index++)
+ {
+ CompactFlash_ID[index] = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_DATA);
+ }
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read sector from PCCARD memory
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param pBuffer: pointer to destination read buffer
+ * @param SectorAddress: Sector address to read
+ * @param pStatus: pointer to PCCARD status
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0U;
+ uint8_t status = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize PCCARD status */
+ *pStatus = PCCARD_READY;
+
+ /* Set the parameters to write a sector */
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00U;
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100U ) | ((uint16_t)SectorAddress);
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0xE4A0U;
+
+ do
+ {
+ /* wait till the Status = 0x80 */
+ status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }while((status == 0x80U) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR;
+
+ do
+ {
+ /* wait till the Status = PCCARD_STATUS_OK */
+ status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }while((status != PCCARD_STATUS_OK) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Read bytes */
+ for(; index < PCCARD_SECTOR_SIZE; index++)
+ {
+ *(uint16_t *)pBuffer++ = *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR);
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Write sector to PCCARD memory
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param pBuffer: pointer to source write buffer
+ * @param SectorAddress: Sector address to write
+ * @param pStatus: pointer to PCCARD status
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0U;
+ uint8_t status = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize PCCARD status */
+ *pStatus = PCCARD_READY;
+
+ /* Set the parameters to write a sector */
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00U;
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100U ) | ((uint16_t)SectorAddress);
+ *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0x30A0U;
+
+ do
+ {
+ /* Wait till the Status = PCCARD_STATUS_OK */
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }while((status != PCCARD_STATUS_OK) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Write bytes */
+ for(; index < PCCARD_SECTOR_SIZE; index++)
+ {
+ *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR) = *(uint16_t *)pBuffer++;
+ }
+
+ do
+ {
+ /* Wait till the Status = PCCARD_STATUS_WRITE_OK */
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }while((status != PCCARD_STATUS_WRITE_OK) && timeout);
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Erase sector from PCCARD memory
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @param SectorAddress: Sector address to erase
+ * @param pStatus: pointer to PCCARD status
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_ERASE_SECTOR;
+ uint8_t status = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ /* Initialize PCCARD status */
+ *pStatus = PCCARD_READY;
+
+ /* Set the parameters to write a sector */
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_LOW) = 0x00U;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = 0x00U;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_NUMBER) = SectorAddress;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = 0x01U;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CARD_HEAD) = 0xA0U;
+ *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = ATA_ERASE_SECTOR_CMD;
+
+ /* wait till the PCCARD is ready */
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+ while((status != PCCARD_STATUS_WRITE_OK) && timeout)
+ {
+ status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }
+
+ if(timeout == 0U)
+ {
+ *pStatus = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Check the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reset the PCCARD memory
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Process Locked */
+ __HAL_LOCK(hpccard);
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Provide a SW reset and Read and verify the:
+ - PCCard Configuration Option Register at address 0x98000200 --> 0x80
+ - Card Configuration and Status Register at address 0x98000202 --> 0x00
+ - Pin Replacement Register at address 0x98000204 --> 0x0C
+ - Socket and Copy Register at address 0x98000206 --> 0x00
+ */
+
+ /* Check the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+ *(__IO uint8_t *)(PCCARD_ATTRIBUTE_SPACE_ADDRESS | ATA_CARD_CONFIGURATION ) = 0x01U;
+
+ /* Check the PCCARD controller state */
+ hpccard->State = HAL_PCCARD_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hpccard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles PCCARD device interrupt request.
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval HAL status
+*/
+void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Check PCCARD interrupt Rising edge flag */
+ if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE))
+ {
+ /* PCCARD interrupt callback*/
+ HAL_PCCARD_ITCallback(hpccard);
+
+ /* Clear PCCARD interrupt Rising edge pending bit */
+ __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE);
+ }
+
+ /* Check PCCARD interrupt Level flag */
+ if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_LEVEL))
+ {
+ /* PCCARD interrupt callback*/
+ HAL_PCCARD_ITCallback(hpccard);
+
+ /* Clear PCCARD interrupt Level pending bit */
+ __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_LEVEL);
+ }
+
+ /* Check PCCARD interrupt Falling edge flag */
+ if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE))
+ {
+ /* PCCARD interrupt callback*/
+ HAL_PCCARD_ITCallback(hpccard);
+
+ /* Clear PCCARD interrupt Falling edge pending bit */
+ __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE);
+ }
+
+ /* Check PCCARD interrupt FIFO empty flag */
+ if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FEMPT))
+ {
+ /* PCCARD interrupt callback*/
+ HAL_PCCARD_ITCallback(hpccard);
+
+ /* Clear PCCARD interrupt FIFO empty pending bit */
+ __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FEMPT);
+ }
+}
+
+/**
+ * @brief PCCARD interrupt feature callback
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval None
+ */
+__weak void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpccard);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCCARD_ITCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCCARD_Exported_Functions_Group3 State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### PCCARD State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the PCCARD controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the PCCARD controller state
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval HAL state
+ */
+HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard)
+{
+ return hpccard->State;
+}
+
+/**
+ * @brief Get the compact flash memory status
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval New status of the PCCARD operation. This parameter can be:
+ * - CompactFlash_TIMEOUT_ERROR: when the previous operation generate
+ * a Timeout error
+ * - CompactFlash_READY: when memory is ready for the next operation
+ */
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard)
+{
+ uint32_t timeout = PCCARD_TIMEOUT_STATUS, status_pccard = 0U;
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_PCCARD_STATUS_ONGOING;
+ }
+
+ status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+ while((status_pccard == PCCARD_BUSY) && timeout)
+ {
+ status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+ timeout--;
+ }
+
+ if(timeout == 0U)
+ {
+ status_pccard = PCCARD_TIMEOUT_ERROR;
+ }
+
+ /* Return the operation status */
+ return (HAL_PCCARD_StatusTypeDef) status_pccard;
+}
+
+/**
+ * @brief Reads the Compact Flash memory status using the Read status command
+ * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+ * the configuration information for PCCARD module.
+ * @retval The status of the Compact Flash memory. This parameter can be:
+ * - CompactFlash_BUSY: when memory is busy
+ * - CompactFlash_READY: when memory is ready for the next operation
+ * - CompactFlash_ERROR: when the previous operation generates error
+ */
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard)
+{
+ uint8_t data = 0U, status_pccard = PCCARD_BUSY;
+
+ /* Check the PCCARD controller state */
+ if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+ {
+ return HAL_PCCARD_STATUS_ONGOING;
+ }
+
+ /* Read status operation */
+ data = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+ if((data & PCCARD_TIMEOUT_ERROR) == PCCARD_TIMEOUT_ERROR)
+ {
+ status_pccard = PCCARD_TIMEOUT_ERROR;
+ }
+ else if((data & PCCARD_READY) == PCCARD_READY)
+ {
+ status_pccard = PCCARD_READY;
+ }
+
+ return (HAL_PCCARD_StatusTypeDef) status_pccard;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pccard.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,266 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pccard.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PCCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCCARD_H
+#define __STM32F4xx_HAL_PCCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @addtogroup PCCARD
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Types PCCARD Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL PCCARD State structures definition
+ */
+typedef enum
+{
+ HAL_PCCARD_STATE_RESET = 0x00U, /*!< PCCARD peripheral not yet initialized or disabled */
+ HAL_PCCARD_STATE_READY = 0x01U, /*!< PCCARD peripheral ready */
+ HAL_PCCARD_STATE_BUSY = 0x02U, /*!< PCCARD peripheral busy */
+ HAL_PCCARD_STATE_ERROR = 0x04U /*!< PCCARD peripheral error */
+}HAL_PCCARD_StateTypeDef;
+
+typedef enum
+{
+ HAL_PCCARD_STATUS_SUCCESS = 0U,
+ HAL_PCCARD_STATUS_ONGOING,
+ HAL_PCCARD_STATUS_ERROR,
+ HAL_PCCARD_STATUS_TIMEOUT
+}HAL_PCCARD_StatusTypeDef;
+
+/**
+ * @brief FMC_PCCARD handle Structure definition
+ */
+typedef struct
+{
+ FMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */
+
+ FMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */
+
+ __IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */
+
+ HAL_LockTypeDef Lock; /*!< PCCARD Lock */
+
+}PCCARD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Macros PCCARD Exported Macros
+ * @{
+ */
+/** @brief Reset PCCARD handle state
+ * @param __HANDLE__: specifies the PCCARD handle.
+ * @retval None
+ */
+#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCCARD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming);
+HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
+/**
+ * @}
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group3
+ * @{
+ */
+/* PCCARD State functions *******************************************************/
+HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard);
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard);
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCCARD_Private_Constants PCCARD Private Constants
+ * @{
+ */
+#define PCCARD_DEVICE_ADDRESS ((uint32_t)0x90000000U)
+#define PCCARD_ATTRIBUTE_SPACE_ADDRESS ((uint32_t)0x98000000U) /* Attribute space size to @0x9BFF FFFF */
+#define PCCARD_COMMON_SPACE_ADDRESS PCCARD_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */
+#define PCCARD_IO_SPACE_ADDRESS ((uint32_t)0x9C000000U) /* IO space size to @0x9FFF FFFF */
+#define PCCARD_IO_SPACE_PRIMARY_ADDR ((uint32_t)0x9C0001F0U) /* IO space size to @0x9FFF FFFF */
+
+/* Flash-ATA registers description */
+#define ATA_DATA ((uint8_t)0x00U) /* Data register */
+#define ATA_SECTOR_COUNT ((uint8_t)0x02U) /* Sector Count register */
+#define ATA_SECTOR_NUMBER ((uint8_t)0x03U) /* Sector Number register */
+#define ATA_CYLINDER_LOW ((uint8_t)0x04U) /* Cylinder low register */
+#define ATA_CYLINDER_HIGH ((uint8_t)0x05U) /* Cylinder high register */
+#define ATA_CARD_HEAD ((uint8_t)0x06U) /* Card/Head register */
+#define ATA_STATUS_CMD ((uint8_t)0x07U) /* Status(read)/Command(write) register */
+#define ATA_STATUS_CMD_ALTERNATE ((uint8_t)0x0EU) /* Alternate Status(read)/Command(write) register */
+#define ATA_COMMON_DATA_AREA ((uint16_t)0x0400U) /* Start of data area (for Common access only!) */
+#define ATA_CARD_CONFIGURATION ((uint16_t)0x0202U) /* Card Configuration and Status Register */
+
+/* Flash-ATA commands */
+#define ATA_READ_SECTOR_CMD ((uint8_t)0x20U)
+#define ATA_WRITE_SECTOR_CMD ((uint8_t)0x30U)
+#define ATA_ERASE_SECTOR_CMD ((uint8_t)0xC0)
+#define ATA_IDENTIFY_CMD ((uint8_t)0xEC)
+
+/* PC Card/Compact Flash status */
+#define PCCARD_TIMEOUT_ERROR ((uint8_t)0x60U)
+#define PCCARD_BUSY ((uint8_t)0x80U)
+#define PCCARD_PROGR ((uint8_t)0x01U)
+#define PCCARD_READY ((uint8_t)0x40U)
+
+#define PCCARD_SECTOR_SIZE ((uint32_t)255U) /* In half words */
+
+/**
+ * @}
+ */
+/* Compact Flash redefinition */
+#define HAL_CF_Init HAL_PCCARD_Init
+#define HAL_CF_DeInit HAL_PCCARD_DeInit
+#define HAL_CF_MspInit HAL_PCCARD_MspInit
+#define HAL_CF_MspDeInit HAL_PCCARD_MspDeInit
+
+#define HAL_CF_Read_ID HAL_PCCARD_Read_ID
+#define HAL_CF_Write_Sector HAL_PCCARD_Write_Sector
+#define HAL_CF_Read_Sector HAL_PCCARD_Read_Sector
+#define HAL_CF_Erase_Sector HAL_PCCARD_Erase_Sector
+#define HAL_CF_Reset HAL_PCCARD_Reset
+#define HAL_CF_IRQHandler HAL_PCCARD_IRQHandler
+#define HAL_CF_ITCallback HAL_PCCARD_ITCallback
+
+#define HAL_CF_GetState HAL_PCCARD_GetState
+#define HAL_CF_GetStatus HAL_PCCARD_GetStatus
+#define HAL_CF_ReadStatus HAL_PCCARD_ReadStatus
+
+#define HAL_CF_STATUS_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define HAL_CF_STATUS_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define HAL_CF_STATUS_ERROR HAL_PCCARD_STATUS_ERROR
+#define HAL_CF_STATUS_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+#define HAL_CF_StatusTypeDef HAL_PCCARD_StatusTypeDef
+
+#define CF_DEVICE_ADDRESS PCCARD_DEVICE_ADDRESS
+#define CF_ATTRIBUTE_SPACE_ADDRESS PCCARD_ATTRIBUTE_SPACE_ADDRESS
+#define CF_COMMON_SPACE_ADDRESS PCCARD_COMMON_SPACE_ADDRESS
+#define CF_IO_SPACE_ADDRESS PCCARD_IO_SPACE_ADDRESS
+#define CF_IO_SPACE_PRIMARY_ADDR PCCARD_IO_SPACE_PRIMARY_ADDR
+
+#define CF_TIMEOUT_ERROR PCCARD_TIMEOUT_ERROR
+#define CF_BUSY PCCARD_BUSY
+#define CF_PROGR PCCARD_PROGR
+#define CF_READY PCCARD_READY
+
+#define CF_SECTOR_SIZE PCCARD_SECTOR_SIZE
+
+/* Private macros ------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_PCCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1329 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The PCD HAL driver can be used as follows:
+
+ (#) Declare a PCD_HandleTypeDef handle structure, for example:
+ PCD_HandleTypeDef hpcd;
+
+ (#) Fill parameters of Init structure in HCD handle
+
+ (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...)
+
+ (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
+ (##) Enable the PCD/USB Low Level interface clock using
+ (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+ (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure PCD pin-out
+ (##) Configure PCD NVIC interrupt
+
+ (#)Associate the Upper USB device stack to the HAL PCD Driver:
+ (##) hpcd.pData = pdev;
+
+ (#)Enable PCD transmission and reception:
+ (##) HAL_PCD_Start();
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCD PCD
+ * @brief PCD HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b))
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup PCD_Private_Functions PCD Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the PCD according to the specified
+ * parameters in the PCD_InitTypeDef and initialize the associated handle.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
+{
+ uint32_t i = 0U;
+
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
+
+ hpcd->State = HAL_PCD_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_PCD_MspInit(hpcd);
+
+ /* Disable the Interrupts */
+ __HAL_PCD_DISABLE(hpcd);
+
+ /*Init the Core (common init.) */
+ USB_CoreInit(hpcd->Instance, hpcd->Init);
+
+ /* Force Device Mode*/
+ USB_SetCurrentMode(hpcd->Instance , USB_OTG_DEVICE_MODE);
+
+ /* Init endpoints structures */
+ for (i = 0U; i < 15U; i++)
+ {
+ /* Init ep structure */
+ hpcd->IN_ep[i].is_in = 1U;
+ hpcd->IN_ep[i].num = i;
+ hpcd->IN_ep[i].tx_fifo_num = i;
+ /* Control until ep is activated */
+ hpcd->IN_ep[i].type = EP_TYPE_CTRL;
+ hpcd->IN_ep[i].maxpacket = 0U;
+ hpcd->IN_ep[i].xfer_buff = 0U;
+ hpcd->IN_ep[i].xfer_len = 0U;
+ }
+
+ for (i = 0U; i < 15U; i++)
+ {
+ hpcd->OUT_ep[i].is_in = 0U;
+ hpcd->OUT_ep[i].num = i;
+ hpcd->IN_ep[i].tx_fifo_num = i;
+ /* Control until ep is activated */
+ hpcd->OUT_ep[i].type = EP_TYPE_CTRL;
+ hpcd->OUT_ep[i].maxpacket = 0U;
+ hpcd->OUT_ep[i].xfer_buff = 0U;
+ hpcd->OUT_ep[i].xfer_len = 0U;
+
+ hpcd->Instance->DIEPTXF[i] = 0U;
+ }
+
+ /* Init Device */
+ USB_DevInit(hpcd->Instance, hpcd->Init);
+
+ hpcd->State= HAL_PCD_STATE_READY;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ /* Activate LPM */
+ if (hpcd->Init.lpm_enable == 1U)
+ {
+ HAL_PCDEx_ActivateLPM(hpcd);
+ }
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+#ifdef USB_OTG_GCCFG_BCDEN
+ /* Activate Battery charging */
+ if (hpcd->Init.battery_charging_enable == 1U)
+ {
+ HAL_PCDEx_ActivateBCD(hpcd);
+ }
+#endif /* USB_OTG_GCCFG_BCDEN */
+
+ USB_DevDisconnect (hpcd->Instance);
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the PCD peripheral.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hpcd->State = HAL_PCD_STATE_BUSY;
+
+ /* Stop Device */
+ HAL_PCD_Stop(hpcd);
+
+ /* DeInit the low level hardware */
+ HAL_PCD_MspDeInit(hpcd);
+
+ hpcd->State = HAL_PCD_STATE_RESET;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the PCD MSP.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes PCD MSP.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start The USB OTG Device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ USB_DevConnect (hpcd->Instance);
+ __HAL_PCD_ENABLE(hpcd);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop The USB OTG Device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ __HAL_PCD_DISABLE(hpcd);
+ USB_StopDevice(hpcd->Instance);
+ USB_DevDisconnect(hpcd->Instance);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles PCD interrupt request.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ uint32_t i = 0U, ep_intr = 0U, epint = 0U, epnum = 0U;
+ uint32_t fifoemptymsk = 0U, temp = 0U;
+ USB_OTG_EPTypeDef *ep;
+ uint32_t hclk = 180000000;
+
+ /* ensure that we are in device mode */
+ if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE)
+ {
+ /* avoid spurious interrupt */
+ if(__HAL_PCD_IS_INVALID_INTERRUPT(hpcd))
+ {
+ return;
+ }
+
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS))
+ {
+ /* incorrect mode, acknowledge the interrupt */
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS);
+ }
+
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT))
+ {
+ epnum = 0U;
+
+ /* Read in the device interrupt bits */
+ ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance);
+
+ while ( ep_intr )
+ {
+ if (ep_intr & 0x1U)
+ {
+ epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, epnum);
+
+ if(( epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC)
+ {
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC);
+
+ if(hpcd->Init.dma_enable == 1U)
+ {
+ hpcd->OUT_ep[epnum].xfer_count = hpcd->OUT_ep[epnum].maxpacket- (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ);
+ hpcd->OUT_ep[epnum].xfer_buff += hpcd->OUT_ep[epnum].maxpacket;
+ }
+
+ HAL_PCD_DataOutStageCallback(hpcd, epnum);
+ if(hpcd->Init.dma_enable == 1U)
+ {
+ if((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U))
+ {
+ /* this is ZLP, so prepare EP0 for next setup */
+ USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
+ }
+ }
+ }
+
+ if(( epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP)
+ {
+ /* Inform the upper layer that a setup packet is available */
+ HAL_PCD_SetupStageCallback(hpcd);
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
+ }
+
+ if(( epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS)
+ {
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS);
+ }
+
+#ifdef USB_OTG_DOEPINT_OTEPSPR
+ /* Clear Status Phase Received interrupt */
+ if(( epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR)
+ {
+ CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR);
+ }
+#endif /* USB_OTG_DOEPINT_OTEPSPR */
+ }
+ epnum++;
+ ep_intr >>= 1U;
+ }
+ }
+
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT))
+ {
+ /* Read in the device interrupt bits */
+ ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance);
+
+ epnum = 0U;
+
+ while ( ep_intr )
+ {
+ if (ep_intr & 0x1U) /* In ITR */
+ {
+ epint = USB_ReadDevInEPInterrupt(hpcd->Instance, epnum);
+
+ if(( epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC)
+ {
+ fifoemptymsk = 0x1U << epnum;
+ USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC);
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket;
+ }
+
+ HAL_PCD_DataInStageCallback(hpcd, epnum);
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ /* this is ZLP, so prepare EP0 for next setup */
+ if((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U))
+ {
+ /* prepare to rx more setup packets */
+ USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup);
+ }
+ }
+ }
+ if(( epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC);
+ }
+ if(( epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE);
+ }
+ if(( epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE);
+ }
+ if(( epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD)
+ {
+ CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD);
+ }
+ if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE)
+ {
+ PCD_WriteEmptyTxFifo(hpcd , epnum);
+ }
+ }
+ epnum++;
+ ep_intr >>= 1U;
+ }
+ }
+
+ /* Handle Resume Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT))
+ {
+ /* Clear the Remote Wake-up Signaling */
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ if(hpcd->LPM_State == LPM_L1)
+ {
+ hpcd->LPM_State = LPM_L0;
+ HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE);
+ }
+ else
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+ {
+ HAL_PCD_ResumeCallback(hpcd);
+ }
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT);
+ }
+
+ /* Handle Suspend Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP))
+ {
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+ {
+
+ HAL_PCD_SuspendCallback(hpcd);
+ }
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
+ }
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ /* Handle LPM Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT);
+ if( hpcd->LPM_State == LPM_L0)
+ {
+ hpcd->LPM_State = LPM_L1;
+ hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >>2 ;
+ HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE);
+ }
+ else
+ {
+ HAL_PCD_SuspendCallback(hpcd);
+ }
+ }
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+ /* Handle Reset Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST))
+ {
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
+ USB_FlushTxFifo(hpcd->Instance , 0U);
+
+ for (i = 0U; i < hpcd->Init.dev_endpoints; i++)
+ {
+ USBx_INEP(i)->DIEPINT = 0xFFU;
+ USBx_OUTEP(i)->DOEPINT = 0xFFU;
+ }
+ USBx_DEVICE->DAINT = 0xFFFFFFFFU;
+ USBx_DEVICE->DAINTMSK |= 0x10001U;
+
+ if(hpcd->Init.use_dedicated_ep1)
+ {
+ USBx_DEVICE->DOUTEP1MSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
+ USBx_DEVICE->DINEP1MSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
+ }
+ else
+ {
+#ifdef USB_OTG_DOEPINT_OTEPSPR
+ USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM | USB_OTG_DOEPMSK_OTEPSPRM);
+#else
+ USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
+#endif /* USB_OTG_DOEPINT_OTEPSPR */
+ USBx_DEVICE->DIEPMSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
+ }
+
+ /* Set Default Address to 0 */
+ USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD;
+
+ /* setup EP0 to receive SETUP packets */
+ USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST);
+ }
+
+ /* Handle Enumeration done Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE))
+ {
+ USB_ActivateSetup(hpcd->Instance);
+ hpcd->Instance->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT;
+
+ if ( USB_GetDevSpeed(hpcd->Instance) == USB_OTG_SPEED_HIGH)
+ {
+ hpcd->Init.speed = USB_OTG_SPEED_HIGH;
+ hpcd->Init.ep0_mps = USB_OTG_HS_MAX_PACKET_SIZE ;
+ hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_HS_TRDT_VALUE << 10U) & USB_OTG_GUSBCFG_TRDT);
+ }
+ else
+ {
+ hpcd->Init.speed = USB_OTG_SPEED_FULL;
+ hpcd->Init.ep0_mps = USB_OTG_FS_MAX_PACKET_SIZE ;
+
+ /* The USBTRD is configured according to the tables below, depending on AHB frequency
+ used by application. In the low AHB frequency range it is used to stretch enough the USB response
+ time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access
+ latency to the Data FIFO */
+
+ if((hclk >= 14200000)&&(hclk < 15000000))
+ {
+ /* hclk Clock Range between 14.2-15 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xF << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 15000000)&&(hclk < 16000000))
+ {
+ /* hclk Clock Range between 15-16 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xE << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 16000000)&&(hclk < 17200000))
+ {
+ /* hclk Clock Range between 16-17.2 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xD << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 17200000)&&(hclk < 18500000))
+ {
+ /* hclk Clock Range between 17.2-18.5 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xC << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 18500000)&&(hclk < 20000000))
+ {
+ /* hclk Clock Range between 18.5-20 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xB << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 20000000)&&(hclk < 21800000))
+ {
+ /* hclk Clock Range between 20-21.8 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0xA << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 21800000)&&(hclk < 24000000))
+ {
+ /* hclk Clock Range between 21.8-24 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x9 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 24000000)&&(hclk < 27700000))
+ {
+ /* hclk Clock Range between 24-27.7 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x8 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else if((hclk >= 27700000)&&(hclk < 32000000))
+ {
+ /* hclk Clock Range between 27.7-32 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x7 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+
+ else /* if(hclk >= 32000000) */
+ {
+ /* hclk Clock Range between 32-180 MHz */
+ hpcd->Instance->GUSBCFG |= (uint32_t)((0x6 << 10) & USB_OTG_GUSBCFG_TRDT);
+ }
+ }
+
+ HAL_PCD_ResetCallback(hpcd);
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE);
+ }
+
+ /* Handle RxQLevel Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL))
+ {
+ USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+ temp = USBx->GRXSTSP;
+
+ ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM];
+
+ if(((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17U) == STS_DATA_UPDT)
+ {
+ if((temp & USB_OTG_GRXSTSP_BCNT) != 0U)
+ {
+ USB_ReadPacket(USBx, ep->xfer_buff, (temp & USB_OTG_GRXSTSP_BCNT) >> 4U);
+ ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+ ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+ }
+ }
+ else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17U) == STS_SETUP_UPDT)
+ {
+ USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U);
+ ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4U;
+ }
+ USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+ }
+
+ /* Handle SOF Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF))
+ {
+ HAL_PCD_SOFCallback(hpcd);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF);
+ }
+
+ /* Handle Incomplete ISO IN Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR))
+ {
+ HAL_PCD_ISOINIncompleteCallback(hpcd, epnum);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR);
+ }
+
+ /* Handle Incomplete ISO OUT Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+ {
+ HAL_PCD_ISOOUTIncompleteCallback(hpcd, epnum);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+ }
+
+ /* Handle Connection event Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT))
+ {
+ HAL_PCD_ConnectCallback(hpcd);
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT);
+ }
+
+ /* Handle Disconnection event Interrupt */
+ if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT))
+ {
+ temp = hpcd->Instance->GOTGINT;
+
+ if((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET)
+ {
+ HAL_PCD_DisconnectCallback(hpcd);
+ }
+ hpcd->Instance->GOTGINT |= temp;
+ }
+ }
+}
+
+/**
+ * @brief Data OUT stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DataOutStageCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Data IN stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DataInStageCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Setup stage callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SetupStageCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Start Of Frame callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SOFCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Reset callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ResetCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Suspend event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_SuspendCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Resume event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ResumeCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO OUT callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO IN callback.
+ * @param hpcd: PCD handle
+ * @param epnum: endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Connection event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_ConnectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Disconnection event callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_DisconnectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Connect the USB device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ USB_DevConnect(hpcd->Instance);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Disconnect the USB device.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+ USB_DevDisconnect(hpcd->Instance);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the USB Device address.
+ * @param hpcd: PCD handle
+ * @param address: new device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address)
+{
+ __HAL_LOCK(hpcd);
+ USB_SetDevAddress(hpcd->Instance, address);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+/**
+ * @brief Open and configure an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param ep_mps: endpoint max packet size
+ * @param ep_type: endpoint type
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
+{
+ HAL_StatusTypeDef ret = HAL_OK;
+ USB_OTG_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+ }
+ ep->num = ep_addr & 0x7FU;
+
+ ep->is_in = (0x80U & ep_addr) != 0U;
+ ep->maxpacket = ep_mps;
+ ep->type = ep_type;
+ if (ep->is_in)
+ {
+ /* Assign a Tx FIFO */
+ ep->tx_fifo_num = ep->num;
+ }
+ /* Set initial data PID. */
+ if (ep_type == EP_TYPE_BULK )
+ {
+ ep->data_pid_start = 0U;
+ }
+
+ __HAL_LOCK(hpcd);
+ USB_ActivateEndpoint(hpcd->Instance , ep);
+ __HAL_UNLOCK(hpcd);
+ return ret;
+}
+
+
+/**
+ * @brief Deactivate an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+ }
+ ep->num = ep_addr & 0x7FU;
+
+ ep->is_in = (0x80U & ep_addr) != 0U;
+
+ __HAL_LOCK(hpcd);
+ USB_DeactivateEndpoint(hpcd->Instance , ep);
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Receive an amount of data.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param pBuf: pointer to the reception buffer
+ * @param len: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0U;
+ ep->is_in = 0U;
+ ep->num = ep_addr & 0x7FU;
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ ep->dma_addr = (uint32_t)pBuf;
+ }
+
+ __HAL_LOCK(hpcd);
+
+ if ((ep_addr & 0x7FU) == 0U)
+ {
+ USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+ else
+ {
+ USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get Received Data Size.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval Data Size
+ */
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ return hpcd->OUT_ep[ep_addr & 0x7FU].xfer_count;
+}
+/**
+ * @brief Send an amount of data.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @param pBuf: pointer to the transmission buffer
+ * @param len: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0U;
+ ep->is_in = 1U;
+ ep->num = ep_addr & 0x7FU;
+
+ if (hpcd->Init.dma_enable == 1U)
+ {
+ ep->dma_addr = (uint32_t)pBuf;
+ }
+
+ __HAL_LOCK(hpcd);
+
+ if ((ep_addr & 0x7FU) == 0U)
+ {
+ USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+ else
+ {
+ USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+ }
+
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set a STALL condition over an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 1U;
+ ep->num = ep_addr & 0x7FU;
+ ep->is_in = ((ep_addr & 0x80U) == 0x80U);
+
+
+ __HAL_LOCK(hpcd);
+ USB_EPSetStall(hpcd->Instance , ep);
+ if((ep_addr & 0x7FU) == 0U)
+ {
+ USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Clear a STALL condition over in an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ USB_OTG_EPTypeDef *ep;
+
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 0U;
+ ep->num = ep_addr & 0x7FU;
+ ep->is_in = ((ep_addr & 0x80U) == 0x80U);
+
+ __HAL_LOCK(hpcd);
+ USB_EPClearStall(hpcd->Instance , ep);
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Flush an endpoint.
+ * @param hpcd: PCD handle
+ * @param ep_addr: endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ __HAL_LOCK(hpcd);
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ USB_FlushTxFifo(hpcd->Instance, ep_addr & 0x7FU);
+ }
+ else
+ {
+ USB_FlushRxFifo(hpcd->Instance);
+ }
+
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Activate remote wakeup signalling.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+ {
+ /* Activate Remote wakeup signaling */
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief De-activate remote wakeup signalling.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ /* De-activate Remote wakeup signaling */
+ USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG);
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the PCD handle state.
+ * @param hpcd: PCD handle
+ * @retval HAL state
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
+{
+ return hpcd->State;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup PCD_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Check FIFO for the next packet to be loaded.
+ * @param hpcd: PCD handle
+ * @param epnum : endpoint number
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ USB_OTG_EPTypeDef *ep;
+ int32_t len = 0U;
+ uint32_t len32b;
+ uint32_t fifoemptymsk = 0U;
+
+ ep = &hpcd->IN_ep[epnum];
+ len = ep->xfer_len - ep->xfer_count;
+
+ if (len > ep->maxpacket)
+ {
+ len = ep->maxpacket;
+ }
+
+
+ len32b = (len + 3U) / 4U;
+
+ while ( (USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b &&
+ ep->xfer_count < ep->xfer_len &&
+ ep->xfer_len != 0U)
+ {
+ /* Write the FIFO */
+ len = ep->xfer_len - ep->xfer_count;
+
+ if (len > ep->maxpacket)
+ {
+ len = ep->maxpacket;
+ }
+ len32b = (len + 3U) / 4U;
+
+ USB_WritePacket(USBx, ep->xfer_buff, epnum, len, hpcd->Init.dma_enable);
+
+ ep->xfer_buff += len;
+ ep->xfer_count += len;
+ }
+
+ if(len <= 0U)
+ {
+ fifoemptymsk = 0x1U << epnum;
+ USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,343 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_H
+#define __STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+/**
+ * @brief PCD State structure definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00U,
+ HAL_PCD_STATE_READY = 0x01U,
+ HAL_PCD_STATE_ERROR = 0x02U,
+ HAL_PCD_STATE_BUSY = 0x03U,
+ HAL_PCD_STATE_TIMEOUT = 0x04U
+} PCD_StateTypeDef;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+/* Device LPM suspend state */
+typedef enum
+{
+ LPM_L0 = 0x00U, /* on */
+ LPM_L1 = 0x01U, /* LPM L1 sleep */
+ LPM_L2 = 0x02U, /* suspend */
+ LPM_L3 = 0x03U /* off */
+}PCD_LPM_StateTypeDef;
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef PCD_EPTypeDef ;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
+ uint32_t BESL;
+ uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+#ifdef USB_OTG_GCCFG_BCDEN
+ uint32_t battery_charging_active; /*!< Enable or disable Battery charging.
+ This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GCCFG_BCDEN */
+ void *pData; /*!< Pointer to upper stack Handler */
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extension module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup PCD_Speed PCD Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0U
+#define PCD_SPEED_HIGH_IN_FULL 1U
+#define PCD_SPEED_FULL 2U
+/**
+ * @}
+ */
+
+/** @defgroup PCD_PHY_Module PCD PHY Module
+ * @{
+ */
+#define PCD_PHY_ULPI 1U
+#define PCD_PHY_EMBEDDED 2U
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
+ * @{
+ */
+#ifndef USBD_HS_TRDT_VALUE
+ #define USBD_HS_TRDT_VALUE 9U
+#endif /* USBD_HS_TRDT_VALUE */
+#ifndef USBD_FS_TRDT_VALUE
+ #define USBD_FS_TRDT_VALUE 5U
+#endif /* USBD_FS_TRDT_VALUE */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+ ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10U)
+
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08U)
+#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0CU)
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10U)
+
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08U)
+#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0CU)
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10U)
+
+#define USB_OTG_HS_WAKEUP_EXTI_LINE ((uint32_t)0x00100000U) /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_OTG_FS_WAKEUP_EXTI_LINE ((uint32_t)0x00040000U) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do{EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ }while(0)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do{EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do{EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ }while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do{EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ }while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,324 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCDEx PCDEx
+ * @brief PCD Extended HAL module driver
+ * @{
+ */
+#ifdef HAL_PCD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCD Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @brief PCDEx control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Update FIFO configuration
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Set Tx FIFO
+ * @param hpcd: PCD handle
+ * @param fifo: The number of Tx fifo
+ * @param size: Fifo size
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
+{
+ uint8_t i = 0U;
+ uint32_t Tx_Offset = 0U;
+
+ /* TXn min size = 16 words. (n : Transmit FIFO index)
+ When a TxFIFO is not used, the Configuration should be as follows:
+ case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
+ --> Txm can use the space allocated for Txn.
+ case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
+ --> Txn should be configured with the minimum space of 16 words
+ The FIFO is used optimally when used TxFIFOs are allocated in the top
+ of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
+ When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
+
+ Tx_Offset = hpcd->Instance->GRXFSIZ;
+
+ if(fifo == 0U)
+ {
+ hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((uint32_t)size << 16U) | Tx_Offset);
+ }
+ else
+ {
+ Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16U;
+ for (i = 0U; i < (fifo - 1U); i++)
+ {
+ Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16U);
+ }
+
+ /* Multiply Tx_Size by 2 to get higher performance */
+ hpcd->Instance->DIEPTXF[fifo - 1U] = (uint32_t)(((uint32_t)size << 16U) | Tx_Offset);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set Rx FIFO
+ * @param hpcd: PCD handle
+ * @param size: Size of Rx fifo
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
+{
+ hpcd->Instance->GRXFSIZ = size;
+
+ return HAL_OK;
+}
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Activate LPM feature
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ hpcd->lpm_active = ENABLE;
+ hpcd->LPM_State = LPM_L0;
+ USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM;
+ USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate LPM feature.
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ hpcd->lpm_active = DISABLE;
+ USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM;
+ USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Send LPM message to user layer callback.
+ * @param hpcd: PCD handle
+ * @param msg: LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+}
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief HAL_PCDEx_BCD_VBUSDetect : handle BatteryCharging Process
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Start BCD When device is connected */
+ if (USBx_DEVICE->DCTL & USB_OTG_DCTL_SDIS)
+ {
+ /* Enable DCD : Data Contact Detect */
+ USBx->GCCFG |= USB_OTG_GCCFG_DCDEN;
+
+ /* Wait Detect flag or a timeout is happen*/
+ while ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == 0U)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > 1000U)
+ {
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR);
+ return;
+ }
+ }
+
+ /* Right response got */
+ HAL_Delay(100U);
+
+ /* Check Detect flag*/
+ if (USBx->GCCFG & USB_OTG_GCCFG_DCDET)
+ {
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION);
+ }
+
+ /*Primary detection: checks if connected to Standard Downstream Port
+ (without charging capability) */
+ USBx->GCCFG &=~ USB_OTG_GCCFG_DCDEN;
+ USBx->GCCFG |= USB_OTG_GCCFG_PDEN;
+ HAL_Delay(100U);
+
+ if (!(USBx->GCCFG & USB_OTG_GCCFG_PDET))
+ {
+ /* Case of Standard Downstream Port */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT);
+ }
+ else
+ {
+ /* start secondary detection to check connection to Charging Downstream
+ Port or Dedicated Charging Port */
+ USBx->GCCFG &=~ USB_OTG_GCCFG_PDEN;
+ USBx->GCCFG |= USB_OTG_GCCFG_SDEN;
+ HAL_Delay(100U);
+
+ if ((USBx->GCCFG) & USB_OTG_GCCFG_SDET)
+ {
+ /* case Dedicated Charging Port */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT);
+ }
+ else
+ {
+ /* case Charging Downstream Port */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT);
+ }
+ }
+ /* Battery Charging capability discovery finished */
+ HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED);
+ }
+}
+
+/**
+ * @brief HAL_PCDEx_ActivateBCD : active BatteryCharging feature
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+ hpcd->battery_charging_active = ENABLE;
+ USBx->GCCFG |= (USB_OTG_GCCFG_BCDEN);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCDEx_DeActivateBCD : de-active BatteryCharging feature
+ * @param hpcd: PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+ hpcd->battery_charging_active = DISABLE;
+ USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN);
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCDEx_BatteryCharging_Callback : Send BatteryCharging message to user layer
+ * @param hpcd: PCD handle
+ * @param msg: LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+}
+
+#endif /* STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pcd_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,133 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_EX_H
+#define __STM32F4xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+typedef enum
+{
+ PCD_LPM_L0_ACTIVE = 0x00U, /* on */
+ PCD_LPM_L1_ACTIVE = 0x01U /* LPM L1 sleep */
+}PCD_LPM_MsgTypeDef;
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+typedef enum
+{
+ PCD_BCD_ERROR = 0xFFU,
+ PCD_BCD_CONTACT_DETECTION = 0xFEU,
+ PCD_BCD_STD_DOWNSTREAM_PORT = 0xFDU,
+ PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFCU,
+ PCD_BCD_DEDICATED_CHARGING_PORT = 0xFBU,
+ PCD_BCD_DISCOVERY_COMPLETED = 0x00U
+}PCD_BCD_MsgTypeDef;
+#endif /* STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCD Extended Exported Functions
+ * @{
+ */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
+void HAL_PCDEx_ADP_Sensing_Start(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_ADP_Sensing_Callback(PCD_HandleTypeDef *hpcd);
+#endif /* STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,577 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWR PWR
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWR_Private_Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
+ * @{
+ */
+#define PVD_MODE_IT ((uint32_t)0x00010000U)
+#define PVD_MODE_EVT ((uint32_t)0x00020000U)
+#define PVD_RISING_EDGE ((uint32_t)0x00000001U)
+#define PVD_FALLING_EDGE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted
+ write accesses.
+ To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Enable the Power Controller (PWR) APB1 interface clock using the
+ __HAL_RCC_PWR_CLK_ENABLE() macro.
+ (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
+ * @retval None
+ */
+void HAL_PWR_DeInit(void)
+{
+ __HAL_RCC_PWR_FORCE_RESET();
+ __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+ * @brief Enables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+ *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+ *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Low Power modes configuration functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+
+ *** PVD configuration ***
+ =========================
+ [..]
+ (+) The PVD is used to monitor the VDD power supply by comparing it to a
+ threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+ (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+ than the PVD threshold. This event is internally connected to the EXTI
+ line16 and can generate an interrupt if enabled. This is done through
+ __HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
+ (+) The PVD is stopped in Standby mode.
+
+ *** Wake-up pin configuration ***
+ ================================
+ [..]
+ (+) Wake-up pin is used to wake up the system from Standby mode. This pin is
+ forced in input pull-down configuration and is active on rising edges.
+ (+) There is one Wake-up pin: Wake-up Pin 1 on PA.00.
+ (++) For STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin2 on PC.13
+ (++) For STM32F410xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx there are three Wake-Up pins: Pin1 on PA.00, Pin2 on PC.00 and Pin3 on PC.01
+
+ *** Low Power modes configuration ***
+ =====================================
+ [..]
+ The devices feature 3 low-power modes:
+ (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running.
+ (+) Stop mode: all clocks are stopped, regulator running, regulator
+ in low power mode
+ (+) Standby mode: 1.2V domain powered off.
+
+ *** Sleep mode ***
+ ==================
+ [..]
+ (+) Entry:
+ The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
+ functions with
+ (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+ -@@- The Regulator parameter is not used for the STM32F4 family
+ and is kept as parameter just to maintain compatibility with the
+ lower power families (STM32L).
+ (+) Exit:
+ Any peripheral interrupt acknowledged by the nested vectored interrupt
+ controller (NVIC) can wake up the device from Sleep mode.
+
+ *** Stop mode ***
+ =================
+ [..]
+ In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
+ and the HSE RC oscillators are disabled. Internal SRAM and register contents
+ are preserved.
+ The voltage regulator can be configured either in normal or low-power mode.
+ To minimize the consumption In Stop mode, FLASH can be powered off before
+ entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
+ It can be switched on again by software after exiting the Stop mode using
+ the HAL_PWREx_DisableFlashPowerDown() function.
+
+ (+) Entry:
+ The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON)
+ function with:
+ (++) Main regulator ON.
+ (++) Low Power regulator ON.
+ (+) Exit:
+ Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+
+ *** Standby mode ***
+ ====================
+ [..]
+ (+)
+ The Standby mode allows to achieve the lowest power consumption. It is based
+ on the Cortex-M4 deep sleep mode, with the voltage regulator disabled.
+ The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and
+ the HSE oscillator are also switched off. SRAM and register contents are lost
+ except for the RTC registers, RTC backup registers, backup SRAM and Standby
+ circuitry.
+
+ The voltage regulator is OFF.
+
+ (++) Entry:
+ (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+ (++) Exit:
+ (+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up,
+ tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
+
+ *** Auto-wake-up (AWU) from low-power mode ***
+ =============================================
+ [..]
+
+ (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+ Wake-up event, a tamper event or a time-stamp event, without depending on
+ an external interrupt (Auto-wake-up mode).
+
+ (+) RTC auto-wake-up (AWU) from the Stop and Standby modes
+
+ (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+ configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+ (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+ is necessary to configure the RTC to detect the tamper or time stamp event using the
+ HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
+
+ (++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to
+ configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
+ * information for the PVD.
+ * @note Refer to the electrical characteristics of your device datasheet for
+ * more details about the voltage threshold corresponding to each
+ * detection level.
+ * @retval None
+ */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+ assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+ /* Set PLS[7:5] bits according to PVDLevel value */
+ MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
+
+ /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+ __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+ __HAL_PWR_PVD_EXTI_DISABLE_IT();
+ __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
+ __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+ /* Configure interrupt mode */
+ if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_IT();
+ }
+
+ /* Configure event mode */
+ if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+ }
+
+ /* Configure the edge */
+ if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+ }
+
+ if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+ }
+}
+
+/**
+ * @brief Enables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_EnablePVD(void)
+{
+ *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_DisablePVD(void)
+{
+ *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Enables the Wake-up PINx functionality.
+ * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN1
+ * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices
+ * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx devices
+ * @retval None
+ */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameter */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+ /* Enable the wake up pin */
+ SET_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+ * @brief Disables the Wake-up PINx functionality.
+ * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN1
+ * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices
+ * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices
+ * @retval None
+ */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameter */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+ /* Disable the wake up pin */
+ CLEAR_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+ * @brief Enters Sleep mode.
+ *
+ * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+ *
+ * @note In Sleep mode, the systick is stopped to avoid exit from this mode with
+ * systick interrupt when used as time base for Timeout
+ *
+ * @param Regulator: Specifies the regulator state in SLEEP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
+ * @note This parameter is not used for the STM32F4 family and is kept as parameter
+ * just to maintain compatibility with the lower power families.
+ * @param SLEEPEntry: Specifies if SLEEP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+ /* Select SLEEP mode entry -------------------------------------------------*/
+ if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+}
+
+/**
+ * @brief Enters Stop mode.
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ * @note When exiting Stop mode by issuing an interrupt or a wake-up event,
+ * the HSI RC oscillator is selected as system clock.
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ * @param Regulator: Specifies the regulator state in Stop mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
+ * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
+ * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */
+ MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator);
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+ /* Select Stop mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+ * @brief Enters Standby mode.
+ * @note In Standby mode, all I/O pins are high impedance except for:
+ * - Reset pad (still available)
+ * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
+ * Alarm out, or RTC clock calibration out.
+ * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
+ * - WKUP pin 1 (PA0) if enabled.
+ * @retval None
+ */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+ /* Select Standby mode */
+ SET_BIT(PWR->CR, PWR_CR_PDDS);
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+ /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief This function handles the PWR PVD interrupt request.
+ * @note This API should be called under the PVD_IRQHandler().
+ * @retval None
+ */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+ /* Check PWR Exti flag */
+ if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+ {
+ /* PWR PVD interrupt user callback */
+ HAL_PWR_PVDCallback();
+
+ /* Clear PWR Exti pending bit */
+ __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+ }
+}
+
+/**
+ * @brief PWR PVD interrupt callback
+ * @retval None
+ */
+__weak void HAL_PWR_PVDCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PWR_PVDCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
+ * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * Setting this bit is useful when the processor is expected to run only on
+ * interruptions handling.
+ * @retval None
+ */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+ * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * @retval None
+ */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Enables CORTEX M4 SEVONPEND bit.
+ * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+ /* Set SEVONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @brief Disables CORTEX M4 SEVONPEND bit.
+ * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+ /* Clear SEVONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,449 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_H
+#define __STM32F4xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+ * @{
+ */
+
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
+ This parameter can be a value of @ref PWR_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+ * @{
+ */
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
+ (Compare internally to VREFINT) */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000U) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001U) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002U) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000U)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag PWR Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_BRR PWR_CSR_BRR
+#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A
+ * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
+ * when the device wakes up from Standby mode or by a system reset
+ * or power reset.
+ * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
+ * scaling output selection is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
+
+/**
+ * @brief Enable the PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable the PVD EXTI Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Enable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief Disable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief PVD EXTI line configuration: set rising & falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\
+ }while(0)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\
+ }while(0)
+
+/**
+ * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD Exti flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generates a Software interrupt on PVD EXTI line.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f4xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+ * @{
+ */
+#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_register_alias_address PWR Register alias address
+ * @{
+ */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+#define PWR_CR_OFFSET 0x00U
+#define PWR_CSR_OFFSET 0x04U
+#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
+#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_CR_register_alias PWR CR Register alias address
+ * @{
+ */
+/* --- CR Register ---*/
+/* Alias word address of DBP bit */
+#define DBP_BIT_NUMBER POSITION_VAL(PWR_CR_DBP)
+#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BIT_NUMBER POSITION_VAL(PWR_CR_PVDE)
+#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))
+
+/* Alias word address of PMODE bit */
+#define PMODE_BIT_NUMBER POSITION_VAL(PWR_CR_PMODE)
+#define CR_PMODE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PMODE_BIT_NUMBER * 4U))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
+ * @{
+ */
+/* --- CSR Register ---*/
+/* Alias word address of EWUP bit */
+#define EWUP_BIT_NUMBER POSITION_VAL(PWR_CSR_EWUP)
+#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+ * @{
+ */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+ * @{
+ */
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,649 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of PWR extension peripheral:
+ * + Peripheral Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Constants
+ * @{
+ */
+#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000U
+#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000U
+#define PWR_BKPREG_TIMEOUT_VALUE 1000U
+#define PWR_VOSRDY_TIMEOUT_VALUE 1000U
+/**
+ * @}
+ */
+
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions
+ * @brief Peripheral Extended features functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral extended features functions #####
+ ===============================================================================
+
+ *** Main and Backup Regulators configuration ***
+ ================================================
+ [..]
+ (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
+ the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
+ retained even in Standby or VBAT mode when the low power backup regulator
+ is enabled. It can be considered as an internal EEPROM when VBAT is
+ always present. You can use the HAL_PWREx_EnableBkUpReg() function to
+ enable the low power backup regulator.
+
+ (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
+ the backup SRAM is powered from VDD which replaces the VBAT power supply to
+ save battery life.
+
+ (+) The backup SRAM is not mass erased by a tamper event. It is read
+ protected to prevent confidential data, such as cryptographic private
+ key, from being accessed. The backup SRAM can be erased only through
+ the Flash interface when a protection level change from level 1 to
+ level 0 is requested.
+ -@- Refer to the description of Read protection (RDP) in the Flash
+ programming manual.
+
+ (+) The main internal regulator can be configured to have a tradeoff between
+ performance and power consumption when the device does not operate at
+ the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG()
+ macro which configure VOS bit in PWR_CR register
+
+ Refer to the product datasheets for more details.
+
+ *** FLASH Power Down configuration ****
+ =======================================
+ [..]
+ (+) By setting the FPDS bit in the PWR_CR register by using the
+ HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power
+ down mode when the device enters Stop mode. When the Flash memory
+ is in power down mode, an additional startup delay is incurred when
+ waking up from Stop mode.
+
+ (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, the scale can be modified only when the PLL
+ is OFF and the HSI or HSE clock source is selected as system clock.
+ The new value programmed is active only when the PLL is ON.
+ When the PLL is OFF, the voltage scale 3 is automatically selected.
+ Refer to the datasheets for more details.
+
+ *** Over-Drive and Under-Drive configuration ****
+ =================================================
+ [..]
+ (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Run mode: the main regulator has
+ 2 operating modes available:
+ (++) Normal mode: The CPU and core logic operate at maximum frequency at a given
+ voltage scaling (scale 1, scale 2 or scale 3)
+ (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a
+ higher frequency than the normal mode for a given voltage scaling (scale 1,
+ scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
+ disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow
+ the sequence described in Reference manual.
+
+ (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Stop mode: the main regulator or low power regulator
+ supplies a low power voltage to the 1.2V domain, thus preserving the content of registers
+ and internal SRAM. 2 operating modes are available:
+ (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only
+ available when the main regulator or the low power regulator is used in Scale 3 or
+ low voltage mode.
+ (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
+ available when the main regulator or the low power regulator is in low voltage mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
+{
+ uint32_t tickstart = 0U;
+
+ *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
+{
+ uint32_t tickstart = 0U;
+
+ *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableFlashPowerDown(void)
+{
+ *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableFlashPowerDown(void)
+{
+ *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Return Voltage Scaling Range.
+ * @retval The configured scale for the regulator voltage(VOS bit field).
+ * The returned value can be one of the following:
+ * - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ */
+uint32_t HAL_PWREx_GetVoltageRange(void)
+{
+ return (PWR->CR & PWR_CR_VOS);
+}
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/**
+ * @brief Configures the main internal regulator output voltage.
+ * @param VoltageScaling: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption.
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+ * the maximum value of fHCLK = 168 MHz.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+ * the maximum value of fHCLK = 144 MHz.
+ * @note When moving from Range 1 to Range 2, the system frequency must be decreased to
+ * a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API.
+ * When moving from Range 2 to Range 1, the system frequency can be increased to
+ * a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+ uint32_t tickstart = 0U;
+
+ assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+
+ /* Enable PWR RCC Clock Peripheral */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Set Range */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+ while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || \
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \
+ defined(STM32F412Cx)
+/**
+ * @brief Configures the main internal regulator output voltage.
+ * @param VoltageScaling: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption.
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+ * the maximum value of fHCLK is 168 MHz. It can be extended to
+ * 180 MHz by activating the over-drive mode.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+ * the maximum value of fHCLK is 144 MHz. It can be extended to,
+ * 168 MHz by activating the over-drive mode.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode,
+ * the maximum value of fHCLK is 120 MHz.
+ * @note To update the system clock frequency(SYSCLK):
+ * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
+ * - Call the HAL_RCC_OscConfig() to configure the PLL.
+ * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
+ * - Set the new system clock frequency using the HAL_RCC_ClockConfig().
+ * @note The scale can be modified only when the HSI or HSE clock source is selected
+ * as system clock source, otherwise the API returns HAL_ERROR.
+ * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
+ * value in the PWR_CR1 register are not taken in account.
+ * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
+ * @note The new voltage scale is active only when the PLL is ON.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+ uint32_t tickstart = 0U;
+
+ assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+
+ /* Enable PWR RCC Clock Peripheral */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+ {
+ /* Disable the main PLL */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set Range */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+ /* Enable the main PLL */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Enables Wakeup Pin Detection on high level (rising edge).
+ * @retval None
+ */
+void HAL_PWREx_EnableWakeUpPinPolarityRisingEdge(void)
+{
+ *(__IO uint32_t *) CSR_WUPP_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Enables Wakeup Pin Detection on low level (falling edge).
+ * @retval None
+ */
+void HAL_PWREx_EnableWakeUpPinPolarityFallingEdge(void)
+{
+ *(__IO uint32_t *) CSR_WUPP_BB = (uint32_t)ENABLE;
+}
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
+ defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Enables Main Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices.
+ * @retval None
+ */
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables Main Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices.
+ * @retval None
+ */
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Enables Low Power Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices.
+ * @retval None
+ */
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables Low Power Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx devices.
+ * @retval None
+ */
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE;
+}
+
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Activates the Over-Drive mode.
+ * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices.
+ * This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
+{
+ uint32_t tickstart = 0U;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable the Over-drive to extend the clock frequency to 180 Mhz */
+ __HAL_PWR_OVERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Over-Drive mode.
+ * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices.
+ * This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
+{
+ uint32_t tickstart = 0U;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Disable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Disable the Over-drive */
+ __HAL_PWR_OVERDRIVE_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enters in Under-Drive STOP mode.
+ *
+ * @note This mode is only available for STM32F42xxx/STM324F3xxx/STM32F446xx/STM32F469xx/STM32F479xx devices.
+ *
+ * @note This mode can be selected only when the Under-Drive is already active
+ *
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode
+ *
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ *
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ *
+ * @note When exiting Stop mode by issuing an interrupt or a wake-up event,
+ * the HSI RC oscillator is selected as system clock.
+ *
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ *
+ * @param Regulator: specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @param STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tmpreg1 = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Enable the Under-drive Mode ---------------------------------------------*/
+ /* Clear Under-drive flag */
+ __HAL_PWR_CLEAR_ODRUDR_FLAG();
+
+ /* Enable the Under-drive */
+ __HAL_PWR_UNDERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for UnderDrive mode is ready */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY))
+ {
+ if((HAL_GetTick() - tickstart) > PWR_UDERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tmpreg1 = PWR->CR;
+ /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
+ tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS);
+
+ /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
+ tmpreg1 |= Regulator;
+
+ /* Store the new value */
+ PWR->CR = tmpreg1;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE();
+ }
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+ return HAL_OK;
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_pwr_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,370 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_EX_H
+#define __STM32F4xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+ * @{
+ */
+#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
+#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
+#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2 ((uint32_t)0x00000000U) /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
+#else
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
+ 180 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
+ 168 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins
+ * @{
+ */
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x00000080U)
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define PWR_WAKEUP_PIN3 ((uint32_t)0x00000040U)
+#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \
+ STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+#else
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macros to enable or disable the Over drive mode.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Over drive switching.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Under drive mode.
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode.
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
+
+/** @brief Check PWR flag is set or not.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+ * is ready
+ * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+ * switching is ready
+ * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+ * is enabled in Stop mode
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+ * @{
+ */
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void);
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+void HAL_PWREx_EnableWakeUpPinPolarityRisingEdge(void);
+void HAL_PWREx_EnableWakeUpPinPolarityFallingEdge(void);
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
+ defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\
+ STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWREx Private Constants
+ * @{
+ */
+
+/** @defgroup PWREx_register_alias_address PWREx Register alias address
+ * @{
+ */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+/* --- CR Register ---*/
+/* Alias word address of FPDS bit */
+#define FPDS_BIT_NUMBER POSITION_VAL(PWR_CR_FPDS)
+#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
+
+/* Alias word address of ODEN bit */
+#define ODEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODEN)
+#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U))
+
+/* Alias word address of ODSWEN bit */
+#define ODSWEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODSWEN)
+#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U))
+
+/* Alias word address of MRLVDS bit */
+#define MRLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_MRLVDS)
+#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U))
+
+/* Alias word address of LPLVDS bit */
+#define LPLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_LPLVDS)
+#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U))
+
+ /**
+ * @}
+ */
+
+/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
+ * @{
+ */
+/* --- CSR Register ---*/
+/* Alias word address of BRE bit */
+#define BRE_BIT_NUMBER POSITION_VAL(PWR_CSR_BRE)
+#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/* Alias word address of WUPP bit */
+#define WUPP_BIT_NUMBER POSITION_VAL(PWR_CSR_WUPP)
+#define CSR_WUPP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (WUPP_BIT_NUMBER * 4U))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+ * @{
+ */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
+#else
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+
+#if defined(STM32F446xx)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
+#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN3))
+#else
+#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2352 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_qspi.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief QSPI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the QuadSPI interface (QSPI).
+ * + Initialization and de-initialization functions
+ * + Indirect functional mode management
+ * + Memory-mapped functional mode management
+ * + Auto-polling functional mode management
+ * + Interrupts and flags management
+ * + DMA channel configuration for indirect functional mode
+ * + Errors management and abort functionality
+ *
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ *** Initialization ***
+ ======================
+ [..]
+ (#) As prerequisite, fill in the HAL_QSPI_MspInit() :
+ (++) Enable QuadSPI clock interface with __HAL_RCC_QSPI_CLK_ENABLE().
+ (++) Reset QuadSPI IP with __HAL_RCC_QSPI_FORCE_RESET() and __HAL_RCC_QSPI_RELEASE_RESET().
+ (++) Enable the clocks for the QuadSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE().
+ (++) Configure these QuadSPI pins in alternate mode using HAL_GPIO_Init().
+ (++) If interrupt mode is used, enable and configure QuadSPI global
+ interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+ (++) If DMA mode is used, enable the clocks for the QuadSPI DMA channel
+ with __HAL_RCC_DMAx_CLK_ENABLE(), configure DMA with HAL_DMA_Init(),
+ link it with QuadSPI handle using __HAL_LINKDMA(), enable and configure
+ DMA channel global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+ (#) Configure the flash size, the clock prescaler, the fifo threshold, the
+ clock mode, the sample shifting and the CS high time using the HAL_QSPI_Init() function.
+
+ *** Indirect functional mode ***
+ ================================
+ [..]
+ (#) Configure the command sequence using the HAL_QSPI_Command() or HAL_QSPI_Command_IT()
+ functions :
+ (++) Instruction phase : the mode used and if present the instruction opcode.
+ (++) Address phase : the mode used and if present the size and the address value.
+ (++) Alternate-bytes phase : the mode used and if present the size and the alternate
+ bytes values.
+ (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+ (++) Data phase : the mode used and if present the number of bytes.
+ (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
+ if activated.
+ (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+ (#) If no data is required for the command, it is sent directly to the memory :
+ (++) In polling mode, the output of the function is done when the transfer is complete.
+ (++) In interrupt mode, HAL_QSPI_CmdCpltCallback() will be called when the transfer is complete.
+ (#) For the indirect write mode, use HAL_QSPI_Transmit(), HAL_QSPI_Transmit_DMA() or
+ HAL_QSPI_Transmit_IT() after the command configuration :
+ (++) In polling mode, the output of the function is done when the transfer is complete.
+ (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold
+ is reached and HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
+ (++) In DMA mode, HAL_QSPI_TxHalfCpltCallback() will be called at the half transfer and
+ HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
+ (#) For the indirect read mode, use HAL_QSPI_Receive(), HAL_QSPI_Receive_DMA() or
+ HAL_QSPI_Receive_IT() after the command configuration :
+ (++) In polling mode, the output of the function is done when the transfer is complete.
+ (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold
+ is reached and HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
+ (++) In DMA mode, HAL_QSPI_RxHalfCpltCallback() will be called at the half transfer and
+ HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
+
+ *** Auto-polling functional mode ***
+ ====================================
+ [..]
+ (#) Configure the command sequence and the auto-polling functional mode using the
+ HAL_QSPI_AutoPolling() or HAL_QSPI_AutoPolling_IT() functions :
+ (++) Instruction phase : the mode used and if present the instruction opcode.
+ (++) Address phase : the mode used and if present the size and the address value.
+ (++) Alternate-bytes phase : the mode used and if present the size and the alternate
+ bytes values.
+ (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+ (++) Data phase : the mode used.
+ (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
+ if activated.
+ (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+ (++) The size of the status bytes, the match value, the mask used, the match mode (OR/AND),
+ the polling interval and the automatic stop activation.
+ (#) After the configuration :
+ (++) In polling mode, the output of the function is done when the status match is reached. The
+ automatic stop is activated to avoid an infinite loop.
+ (++) In interrupt mode, HAL_QSPI_StatusMatchCallback() will be called each time the status match is reached.
+
+ *** Memory-mapped functional mode ***
+ =====================================
+ [..]
+ (#) Configure the command sequence and the memory-mapped functional mode using the
+ HAL_QSPI_MemoryMapped() functions :
+ (++) Instruction phase : the mode used and if present the instruction opcode.
+ (++) Address phase : the mode used and the size.
+ (++) Alternate-bytes phase : the mode used and if present the size and the alternate
+ bytes values.
+ (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+ (++) Data phase : the mode used.
+ (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
+ if activated.
+ (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+ (++) The timeout activation and the timeout period.
+ (#) After the configuration, the QuadSPI will be used as soon as an access on the AHB is done on
+ the address range. HAL_QSPI_TimeOutCallback() will be called when the timeout expires.
+
+ *** Errors management and abort functionality ***
+ ==================================================
+ [..]
+ (#) HAL_QSPI_GetError() function gives the error raised during the last operation.
+ (#) HAL_QSPI_Abort() and HAL_QSPI_AbortIT() functions aborts any on-going operation and
+ flushes the fifo :
+ (++) In polling mode, the output of the function is done when the transfer
+ complete bit is set and the busy bit cleared.
+ (++) In interrupt mode, HAL_QSPI_AbortCpltCallback() will be called when
+ the transfer complete bi is set.
+
+ *** Control functions ***
+ =========================
+ [..]
+ (#) HAL_QSPI_GetState() function gives the current state of the HAL QuadSPI driver.
+ (#) HAL_QSPI_SetTimeout() function configures the timeout value used in the driver.
+ (#) HAL_QSPI_SetFifoThreshold() function configures the threshold on the Fifo of the QSPI IP.
+ (#) HAL_QSPI_GetFifoThreshold() function gives the current of the Fifo's threshold
+
+ *** Workarounds linked to Silicon Limitation ***
+ ====================================================
+ [..]
+ (#) Workarounds Implemented inside HAL Driver
+ (++) Extra data written in the FIFO at the end of a read transfer
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup QSPI QSPI
+ * @brief QSPI HAL module driver
+ * @{
+ */
+#ifdef HAL_QSPI_MODULE_ENABLED
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup QSPI_Private_Constants
+ * @{
+ */
+#define QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE ((uint32_t)0x00000000U) /*!<Indirect write mode*/
+#define QSPI_FUNCTIONAL_MODE_INDIRECT_READ ((uint32_t)QUADSPI_CCR_FMODE_0) /*!<Indirect read mode*/
+#define QSPI_FUNCTIONAL_MODE_AUTO_POLLING ((uint32_t)QUADSPI_CCR_FMODE_1) /*!<Automatic polling mode*/
+#define QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED ((uint32_t)QUADSPI_CCR_FMODE) /*!<Memory-mapped mode*/
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @addtogroup QSPI_Private_Macros QSPI Private Macros
+ * @{
+ */
+#define IS_QSPI_FUNCTIONAL_MODE(MODE) (((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE) || \
+ ((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_READ) || \
+ ((MODE) == QSPI_FUNCTIONAL_MODE_AUTO_POLLING) || \
+ ((MODE) == QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup QSPI_Private_Functions QSPI Private Functions
+ * @{
+ */
+static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMAError(DMA_HandleTypeDef *hdma);
+static void QSPI_DMAAbortCplt(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag, FlagStatus State, uint32_t tickstart, uint32_t Timeout);
+static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup QSPI_Exported_Functions QSPI Exported Functions
+ * @{
+ */
+
+/** @defgroup QSPI_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Initialize the QuadSPI.
+ (+) De-initialize the QuadSPI.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the QSPI mode according to the specified parameters
+ * in the QSPI_InitTypeDef and creates the associated handle.
+ * @param hqspi: qspi handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Init(QSPI_HandleTypeDef *hqspi)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the QSPI handle allocation */
+ if(hqspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_ALL_INSTANCE(hqspi->Instance));
+ assert_param(IS_QSPI_CLOCK_PRESCALER(hqspi->Init.ClockPrescaler));
+ assert_param(IS_QSPI_FIFO_THRESHOLD(hqspi->Init.FifoThreshold));
+ assert_param(IS_QSPI_SSHIFT(hqspi->Init.SampleShifting));
+ assert_param(IS_QSPI_FLASH_SIZE(hqspi->Init.FlashSize));
+ assert_param(IS_QSPI_CS_HIGH_TIME(hqspi->Init.ChipSelectHighTime));
+ assert_param(IS_QSPI_CLOCK_MODE(hqspi->Init.ClockMode));
+ assert_param(IS_QSPI_DUAL_FLASH_MODE(hqspi->Init.DualFlash));
+
+ if (hqspi->Init.DualFlash != QSPI_DUALFLASH_ENABLE )
+ {
+ assert_param(IS_QSPI_FLASH_ID(hqspi->Init.FlashID));
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hqspi->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_QSPI_MspInit(hqspi);
+
+ /* Configure the default timeout for the QSPI memory access */
+ HAL_QSPI_SetTimeout(hqspi, HAL_QPSI_TIMEOUT_DEFAULT_VALUE);
+ }
+
+ /* Configure QSPI FIFO Threshold */
+ MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES, ((hqspi->Init.FifoThreshold - 1) << 8));
+
+ /* Wait till BUSY flag reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout);
+
+ if(status == HAL_OK)
+ {
+
+ /* Configure QSPI Clock Prescaler and Sample Shift */
+ MODIFY_REG(hqspi->Instance->CR,(QUADSPI_CR_PRESCALER | QUADSPI_CR_SSHIFT | QUADSPI_CR_FSEL | QUADSPI_CR_DFM), ((hqspi->Init.ClockPrescaler << 24)| hqspi->Init.SampleShifting | hqspi->Init.FlashID| hqspi->Init.DualFlash ));
+
+ /* Configure QSPI Flash Size, CS High Time and Clock Mode */
+ MODIFY_REG(hqspi->Instance->DCR, (QUADSPI_DCR_FSIZE | QUADSPI_DCR_CSHT | QUADSPI_DCR_CKMODE),
+ ((hqspi->Init.FlashSize << 16) | hqspi->Init.ChipSelectHighTime | hqspi->Init.ClockMode));
+
+ /* Enable the QSPI peripheral */
+ __HAL_QSPI_ENABLE(hqspi);
+
+ /* Set QSPI error code to none */
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Initialize the QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief DeInitializes the QSPI peripheral
+ * @param hqspi: qspi handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_DeInit(QSPI_HandleTypeDef *hqspi)
+{
+ /* Check the QSPI handle allocation */
+ if(hqspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ /* Disable the QSPI Peripheral Clock */
+ __HAL_QSPI_DISABLE(hqspi);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_QSPI_MspDeInit(hqspi);
+
+ /* Set QSPI error code to none */
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Initialize the QSPI state */
+ hqspi->State = HAL_QSPI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hqspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief QSPI MSP Init
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+ __weak void HAL_QSPI_MspInit(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_QSPI_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief QSPI MSP DeInit
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+ __weak void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_QSPI_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Exported_Functions_Group2 IO operation functions
+ * @brief QSPI Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Handle the interrupts.
+ (+) Handle the command sequence.
+ (+) Transmit data in blocking, interrupt or DMA mode.
+ (+) Receive data in blocking, interrupt or DMA mode.
+ (+) Manage the auto-polling functional mode.
+ (+) Manage the memory-mapped functional mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function handles QSPI interrupt request.
+ * @param hqspi: QSPI handle
+ * @retval None.
+ */
+void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi)
+{
+ __IO uint32_t *data_reg;
+ uint32_t flag = READ_REG(hqspi->Instance->SR);
+ uint32_t itsource = READ_REG(hqspi->Instance->CR);
+
+ /* QSPI Fifo Threshold interrupt occurred ----------------------------------*/
+ if(((flag & QSPI_FLAG_FT)!= RESET) && ((itsource & QSPI_IT_FT)!= RESET))
+ {
+ data_reg = &hqspi->Instance->DR;
+
+ if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
+ {
+ /* Transmission process */
+ while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
+ {
+ if (hqspi->TxXferCount > 0)
+ {
+ /* Fill the FIFO until it is full */
+ *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
+ hqspi->TxXferCount--;
+ }
+ else
+ {
+ /* No more data available for the transfer */
+ /* Disable the QSPI FIFO Threshold Interrupt */
+ __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_FT);
+ break;
+ }
+ }
+ }
+ else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
+ {
+ /* Receiving Process */
+ while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
+ {
+ if (hqspi->RxXferCount > 0)
+ {
+ /* Read the FIFO until it is empty */
+ *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+ hqspi->RxXferCount--;
+ }
+ else
+ {
+ /* All data have been received for the transfer */
+ /* Disable the QSPI FIFO Threshold Interrupt */
+ __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_FT);
+ break;
+ }
+ }
+ }
+
+ /* FIFO Threshold callback */
+ HAL_QSPI_FifoThresholdCallback(hqspi);
+ }
+
+ /* QSPI Transfer Complete interrupt occurred -------------------------------*/
+ else if(((flag & QSPI_FLAG_TC)!= RESET) && ((itsource & QSPI_IT_TC)!= RESET))
+ {
+ /* Clear interrupt */
+ WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TC);
+
+ /* Disable the QSPI FIFO Threshold, Transfer Error and Transfer complete Interrupts */
+ __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
+
+ /* Transfer complete callback */
+ if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
+ {
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Disable the DMA channel */
+ __HAL_DMA_DISABLE(hqspi->hdma);
+ }
+
+/* Clear Busy bit */
+ HAL_QSPI_Abort_IT(hqspi);
+
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* TX Complete callback */
+ HAL_QSPI_TxCpltCallback(hqspi);
+ }
+ else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
+ {
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Disable the DMA channel */
+ __HAL_DMA_DISABLE(hqspi->hdma);
+ }
+ else
+ {
+ data_reg = &hqspi->Instance->DR;
+ while(READ_BIT(hqspi->Instance->SR, QUADSPI_SR_FLEVEL) != 0)
+ {
+ if (hqspi->RxXferCount > 0)
+ {
+ /* Read the last data received in the FIFO until it is empty */
+ *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+ hqspi->RxXferCount--;
+ }
+ else
+ {
+ /* All data have been received for the transfer */
+ break;
+ }
+ }
+ }
+ /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+ HAL_QSPI_Abort_IT(hqspi);
+
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* RX Complete callback */
+ HAL_QSPI_RxCpltCallback(hqspi);
+ }
+ else if(hqspi->State == HAL_QSPI_STATE_BUSY)
+ {
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* Command Complete callback */
+ HAL_QSPI_CmdCpltCallback(hqspi);
+ }
+ else if(hqspi->State == HAL_QSPI_STATE_ABORT)
+ {
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ if (hqspi->ErrorCode == HAL_QSPI_ERROR_NONE)
+ {
+ /* Abort called by the user */
+
+ /* Abort Complete callback */
+ HAL_QSPI_AbortCpltCallback(hqspi);
+ }
+ else
+ {
+ /* Abort due to an error (eg : DMA error) */
+
+ /* Error callback */
+ HAL_QSPI_ErrorCallback(hqspi);
+ }
+ }
+ }
+
+ /* QSPI Status Match interrupt occurred ------------------------------------*/
+ else if(((flag & QSPI_FLAG_SM)!= RESET) && ((itsource & QSPI_IT_SM)!= RESET))
+ {
+ /* Clear interrupt */
+ WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_SM);
+
+ /* Check if the automatic poll mode stop is activated */
+ if(READ_BIT(hqspi->Instance->CR, QUADSPI_CR_APMS) != 0)
+ {
+ /* Disable the QSPI Transfer Error and Status Match Interrupts */
+ __HAL_QSPI_DISABLE_IT(hqspi, (QSPI_IT_SM | QSPI_IT_TE));
+
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+
+ /* Status match callback */
+ HAL_QSPI_StatusMatchCallback(hqspi);
+ }
+
+ /* QSPI Transfer Error interrupt occurred ----------------------------------*/
+ else if(((flag & QSPI_FLAG_TE)!= RESET) && ((itsource & QSPI_IT_TE)!= RESET))
+ {
+ /* Clear interrupt */
+ WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TE);
+
+ /* Disable all the QSPI Interrupts */
+ __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
+
+ /* Set error code */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_TRANSFER;
+
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Disable the DMA channel */
+ hqspi->hdma->XferAbortCallback = QSPI_DMAAbortCplt;
+ HAL_DMA_Abort_IT(hqspi->hdma);
+ }
+ else
+ {
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* Error callback */
+ HAL_QSPI_ErrorCallback(hqspi);
+ }
+ }
+
+ /* QSPI Timeout interrupt occurred -----------------------------------------*/
+ else if(((flag & QSPI_FLAG_TO)!= RESET) && ((itsource & QSPI_IT_TO)!= RESET))
+ {
+ /* Clear interrupt */
+ WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TO);
+
+ /* Time out callback */
+ HAL_QSPI_TimeOutCallback(hqspi);
+ }
+}
+
+/**
+ * @brief Sets the command configuration.
+ * @param hqspi: QSPI handle
+ * @param cmd : structure that contains the command configuration information
+ * @param Timeout : Time out duration
+ * @note This function is used only in Indirect Read or Write Modes
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Command(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_BUSY;
+
+ /* Wait till BUSY flag reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Call the configuration function */
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ if (cmd->DataMode == QSPI_DATA_NONE)
+ {
+ /* When there is no data phase, the transfer start as soon as the configuration is done
+ so wait until TC flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+
+ }
+ else
+ {
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Sets the command configuration in interrupt mode.
+ * @param hqspi: QSPI handle
+ * @param cmd : structure that contains the command configuration information
+ * @note This function is used only in Indirect Read or Write Modes
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Command_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd)
+{
+ __IO uint32_t count = 0U;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_BUSY;
+
+ /* Wait till BUSY flag reset */
+ count = (hqspi->Timeout) * (SystemCoreClock / 16U / 1000U);
+ do
+ {
+ if (count-- == 0)
+ {
+ hqspi->State = HAL_QSPI_STATE_ERROR;
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT;
+ status = HAL_TIMEOUT;
+ }
+ }
+ while ((__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY)) != RESET);
+
+ if (status == HAL_OK)
+ {
+ if (cmd->DataMode == QSPI_DATA_NONE)
+ {
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC);
+ }
+
+ /* Call the configuration function */
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ if (cmd->DataMode == QSPI_DATA_NONE)
+ {
+ /* When there is no data phase, the transfer start as soon as the configuration is done
+ so activate TC and TE interrupts */
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI Transfer Error Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_TC);
+ }
+ else
+ {
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Transmit an amount of data in blocking mode.
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @param Timeout : Time out duration
+ * @note This function is used only in Indirect Write Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Transmit(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tickstart = HAL_GetTick();
+ __IO uint32_t *data_reg = &hqspi->Instance->DR;
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ if(pData != NULL )
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+ /* Configure counters and size of the handle */
+ hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->pTxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional as indirect write */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ while(hqspi->TxXferCount > 0)
+ {
+ /* Wait until FT flag is set to send data */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_FT, SET, tickstart, Timeout);
+
+ if (status != HAL_OK)
+ {
+ break;
+ }
+
+ *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
+ hqspi->TxXferCount--;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Wait until TC flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Clear Transfer Complete bit */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Clear Busy bit */
+ status = HAL_QSPI_Abort(hqspi);
+ }
+ }
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ return status;
+}
+
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @param Timeout : Time out duration
+ * @note This function is used only in Indirect Read Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Receive(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+ __IO uint32_t *data_reg = &hqspi->Instance->DR;
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+ if(pData != NULL )
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+
+ /* Configure counters and size of the handle */
+ hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->pRxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional as indirect read */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+ /* Start the transfer by re-writing the address in AR register */
+ WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+ while(hqspi->RxXferCount > 0)
+ {
+ /* Wait until FT or TC flag is set to read received data */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, (QSPI_FLAG_FT | QSPI_FLAG_TC), SET, tickstart, Timeout);
+
+ if (status != HAL_OK)
+ {
+ break;
+ }
+
+ *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+ hqspi->RxXferCount--;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Wait until TC flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Clear Transfer Complete bit */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+ status = HAL_QSPI_Abort(hqspi);
+ }
+ }
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ return status;
+}
+
+/**
+ * @brief Send an amount of data in interrupt mode
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @note This function is used only in Indirect Write Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Transmit_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+ if(pData != NULL )
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+ /* Configure counters and size of the handle */
+ hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->pTxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional as indirect write */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
+
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Receive an amount of data in no-blocking mode with Interrupt
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @note This function is used only in Indirect Read Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Receive_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ if(pData != NULL )
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+
+ /* Configure counters and size of the handle */
+ hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+ hqspi->pRxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional as indirect read */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+ /* Start the transfer by re-writing the address in AR register */
+ WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode with DMA.
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer
+ * @note This function is used only in Indirect Write Mode
+ * @note If DMA peripheral access is configured as halfword, the number
+ * of data and the fifo threshold should be aligned on halfword
+ * @note If DMA peripheral access is configured as word, the number
+ * of data and the fifo threshold should be aligned on word
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Transmit_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t *tmp;
+ uint32_t data_size = (READ_REG(hqspi->Instance->DLR) + 1);
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ /* Clear the error code */
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ if(pData != NULL )
+ {
+ /* Configure counters of the handle */
+ if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE)
+ {
+ hqspi->TxXferCount = data_size;
+ }
+ else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_HALFWORD)
+ {
+ if (((data_size % 2) != 0) || ((hqspi->Init.FifoThreshold % 2) != 0))
+ {
+ /* The number of data or the fifo threshold is not aligned on halfword
+ => no transfer possible with DMA peripheral access configured as halfword */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ else
+ {
+ hqspi->TxXferCount = (data_size >> 1);
+ }
+ }
+ else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_WORD)
+ {
+ if (((data_size % 4) != 0) || ((hqspi->Init.FifoThreshold % 4) != 0))
+ {
+ /* The number of data or the fifo threshold is not aligned on word
+ => no transfer possible with DMA peripheral access configured as word */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ else
+ {
+ hqspi->TxXferCount = (data_size >> 2);
+ }
+ }
+
+ if (status == HAL_OK)
+ {
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, (QSPI_FLAG_TE | QSPI_FLAG_TC));
+
+ /* Configure size and pointer of the handle */
+ hqspi->TxXferSize = hqspi->TxXferCount;
+ hqspi->pTxBuffPtr = pData;
+
+ /* Configure QSPI: CCR register with functional mode as indirect write */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+ /* Set the QSPI DMA transfer complete callback */
+ hqspi->hdma->XferCpltCallback = QSPI_DMATxCplt;
+
+ /* Set the QSPI DMA Half transfer complete callback */
+ hqspi->hdma->XferHalfCpltCallback = QSPI_DMATxHalfCplt;
+
+ /* Set the DMA error callback */
+ hqspi->hdma->XferErrorCallback = QSPI_DMAError;
+
+ /* Clear the DMA abort callback */
+ hqspi->hdma->XferAbortCallback = NULL;
+
+ /* Configure the direction of the DMA */
+ hqspi->hdma->Init.Direction = DMA_MEMORY_TO_PERIPH;
+ MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
+
+ /* Enable the QSPI transmit DMA Channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hqspi->hdma, *(uint32_t*)tmp, (uint32_t)&hqspi->Instance->DR, hqspi->TxXferSize);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI transfer error Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE);
+
+ /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+ }
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode with DMA.
+ * @param hqspi: QSPI handle
+ * @param pData: pointer to data buffer.
+ * @note This function is used only in Indirect Read Mode
+ * @note If DMA peripheral access is configured as halfword, the number
+ * of data and the fifo threshold should be aligned on halfword
+ * @note If DMA peripheral access is configured as word, the number
+ * of data and the fifo threshold should be aligned on word
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_Receive_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t *tmp;
+ uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+ uint32_t data_size = (READ_REG(hqspi->Instance->DLR) + 1);
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ if(pData != NULL )
+ {
+ /* Configure counters of the handle */
+ if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_BYTE)
+ {
+ hqspi->RxXferCount = data_size;
+ }
+ else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_HALFWORD)
+ {
+ if (((data_size % 2) != 0) || ((hqspi->Init.FifoThreshold % 2) != 0))
+ {
+ /* The number of data or the fifo threshold is not aligned on halfword
+ => no transfer possible with DMA peripheral access configured as halfword */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ else
+ {
+ hqspi->RxXferCount = (data_size >> 1);
+ }
+ }
+ else if (hqspi->hdma->Init.PeriphDataAlignment == DMA_PDATAALIGN_WORD)
+ {
+ if (((data_size % 4) != 0) || ((hqspi->Init.FifoThreshold % 4) != 0))
+ {
+ /* The number of data or the fifo threshold is not aligned on word
+ => no transfer possible with DMA peripheral access configured as word */
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ else
+ {
+ hqspi->RxXferCount = (data_size >> 2);
+ }
+ }
+
+ if (status == HAL_OK)
+ {
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, (QSPI_FLAG_TE | QSPI_FLAG_TC));
+
+ /* Configure size and pointer of the handle */
+ hqspi->RxXferSize = hqspi->RxXferCount;
+ hqspi->pRxBuffPtr = pData;
+
+ /* Set the QSPI DMA transfer complete callback */
+ hqspi->hdma->XferCpltCallback = QSPI_DMARxCplt;
+
+ /* Set the QSPI DMA Half transfer complete callback */
+ hqspi->hdma->XferHalfCpltCallback = QSPI_DMARxHalfCplt;
+
+ /* Set the DMA error callback */
+ hqspi->hdma->XferErrorCallback = QSPI_DMAError;
+
+ /* Clear the DMA abort callback */
+ hqspi->hdma->XferAbortCallback = NULL;
+
+ /* Configure the direction of the DMA */
+ hqspi->hdma->Init.Direction = DMA_PERIPH_TO_MEMORY;
+ MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
+
+ /* Enable the DMA Channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hqspi->hdma, (uint32_t)&hqspi->Instance->DR, *(uint32_t*)tmp, hqspi->RxXferSize);
+
+ /* Configure QSPI: CCR register with functional as indirect read */
+ MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+ /* Start the transfer by re-writing the address in AR register */
+ WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI transfer error Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE);
+
+ /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+ }
+ }
+ else
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM;
+ status = HAL_ERROR;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Configure the QSPI Automatic Polling Mode in blocking mode.
+ * @param hqspi: QSPI handle
+ * @param cmd: structure that contains the command configuration information.
+ * @param cfg: structure that contains the polling configuration information.
+ * @param Timeout : Time out duration
+ * @note This function is used only in Automatic Polling Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ assert_param(IS_QSPI_INTERVAL(cfg->Interval));
+ assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
+ assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
+
+ /* Wait till BUSY flag reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Configure QSPI: PSMAR register with the status match value */
+ WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
+
+ /* Configure QSPI: PSMKR register with the status mask value */
+ WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
+
+ /* Configure QSPI: PIR register with the interval value */
+ WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
+
+ /* Configure QSPI: CR register with Match mode and Automatic stop enabled
+ (otherwise there will be an infinite loop in blocking mode) */
+ MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS),
+ (cfg->MatchMode | QSPI_AUTOMATIC_STOP_ENABLE));
+
+ /* Call the configuration function */
+ cmd->NbData = cfg->StatusBytesSize;
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
+
+ /* Wait until SM flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_SM, SET, tickstart, Timeout);
+
+ if (status == HAL_OK)
+ {
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM);
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Configure the QSPI Automatic Polling Mode in non-blocking mode.
+ * @param hqspi: QSPI handle
+ * @param cmd: structure that contains the command configuration information.
+ * @param cfg: structure that contains the polling configuration information.
+ * @note This function is used only in Automatic Polling Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg)
+{
+ __IO uint32_t count = 0U;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ assert_param(IS_QSPI_INTERVAL(cfg->Interval));
+ assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
+ assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
+ assert_param(IS_QSPI_AUTOMATIC_STOP(cfg->AutomaticStop));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
+
+ /* Wait till BUSY flag reset */
+ count = (hqspi->Timeout) * (SystemCoreClock / 16U / 1000U);
+ do
+ {
+ if (count-- == 0)
+ {
+ hqspi->State = HAL_QSPI_STATE_ERROR;
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT;
+ status = HAL_TIMEOUT;
+ }
+ }
+ while ((__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY)) != RESET);
+
+ if (status == HAL_OK)
+ {
+ /* Configure QSPI: PSMAR register with the status match value */
+ WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
+
+ /* Configure QSPI: PSMKR register with the status mask value */
+ WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
+
+ /* Configure QSPI: PIR register with the interval value */
+ WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
+
+ /* Configure QSPI: CR register with Match mode and Automatic stop mode */
+ MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS),
+ (cfg->MatchMode | cfg->AutomaticStop));
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_SM);
+
+ /* Call the configuration function */
+ cmd->NbData = cfg->StatusBytesSize;
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Enable the QSPI Transfer Error and status match Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, (QSPI_IT_SM | QSPI_IT_TE));
+
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Configure the Memory Mapped mode.
+ * @param hqspi: QSPI handle
+ * @param cmd: structure that contains the command configuration information.
+ * @param cfg: structure that contains the memory mapped configuration information.
+ * @note This function is used only in Memory mapped Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check the parameters */
+ assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+ }
+
+ assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+ }
+
+ assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+ }
+
+ assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+ assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+ assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+ assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+ assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+ assert_param(IS_QSPI_TIMEOUT_ACTIVATION(cfg->TimeOutActivation));
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_BUSY_MEM_MAPPED;
+
+ /* Wait till BUSY flag reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout);
+
+ if (status == HAL_OK)
+ {
+ /* Configure QSPI: CR register with timeout counter enable */
+ MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_TCEN, cfg->TimeOutActivation);
+
+ if (cfg->TimeOutActivation == QSPI_TIMEOUT_COUNTER_ENABLE)
+ {
+ assert_param(IS_QSPI_TIMEOUT_PERIOD(cfg->TimeOutPeriod));
+
+ /* Configure QSPI: LPTR register with the low-power timeout value */
+ WRITE_REG(hqspi->Instance->LPTR, cfg->TimeOutPeriod);
+
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TO);
+
+ /* Enable the QSPI TimeOut Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TO);
+ }
+
+ /* Call the configuration function */
+ QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED);
+ }
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Transfer Error callbacks
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_ErrorCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Abort completed callback.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_AbortCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_QSPI_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Command completed callback.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_CmdCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_CmdCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_RxCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+ __weak void HAL_QSPI_TxCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_RxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_RxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+ __weak void HAL_QSPI_TxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FIFO Threshold callbacks
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_FIFOThresholdCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Status Match callbacks
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_StatusMatchCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_StatusMatchCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timeout callbacks
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+__weak void HAL_QSPI_TimeOutCallback(QSPI_HandleTypeDef *hqspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hqspi);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_QSPI_TimeOutCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Exported_Functions_Group3 Peripheral Control and State functions
+ * @brief QSPI control and State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control and State functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to :
+ (+) Check in run-time the state of the driver.
+ (+) Check the error code set during last operation.
+ (+) Abort any operation.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the QSPI handle state.
+ * @param hqspi: QSPI handle
+ * @retval HAL state
+ */
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi)
+{
+ /* Return QSPI handle state */
+ return hqspi->State;
+}
+
+/**
+* @brief Return the QSPI error code
+* @param hqspi: QSPI handle
+* @retval QSPI Error Code
+*/
+uint32_t HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi)
+{
+ return hqspi->ErrorCode;
+}
+
+/**
+* @brief Abort the current transmission
+* @param hqspi: QSPI handle
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_QSPI_Abort(QSPI_HandleTypeDef *hqspi)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check if the state is in one of the busy states */
+ if ((hqspi->State & 0x2) != 0)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Abort DMA channel */
+ status = HAL_DMA_Abort(hqspi->hdma);
+ if(status != HAL_OK)
+ {
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA;
+ }
+ }
+
+ /* Configure QSPI: CR register with Abort request */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+
+ /* Wait until TC flag is set to go back in idle state */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, hqspi->Timeout);
+
+ if(status == HAL_OK)
+ {
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Wait until BUSY flag is reset */
+ status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout);
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Update state */
+ hqspi->State = HAL_QSPI_STATE_READY;
+ }
+ }
+
+ return status;
+}
+
+/**
+* @brief Abort the current transmission (non-blocking function)
+* @param hqspi: QSPI handle
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_QSPI_Abort_IT(QSPI_HandleTypeDef *hqspi)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check if the state is in one of the busy states */
+ if ((hqspi->State & 0x2) != 0)
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Update QSPI state */
+ hqspi->State = HAL_QSPI_STATE_ABORT;
+
+ /* Disable all interrupts */
+ __HAL_QSPI_DISABLE_IT(hqspi, (QSPI_IT_TO | QSPI_IT_SM | QSPI_IT_FT | QSPI_IT_TC | QSPI_IT_TE));
+
+ if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN)!= RESET)
+ {
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Abort DMA channel */
+ hqspi->hdma->XferAbortCallback = QSPI_DMAAbortCplt;
+ HAL_DMA_Abort_IT(hqspi->hdma);
+ }
+ else
+ {
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Enable the QSPI Transfer Complete Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
+
+ /* Configure QSPI: CR register with Abort request */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+ }
+ }
+
+ return status;
+}
+
+/** @brief Set QSPI timeout
+ * @param hqspi: QSPI handle.
+ * @param Timeout: Timeout for the QSPI memory access.
+ * @retval None
+ */
+void HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout)
+{
+ hqspi->Timeout = Timeout;
+}
+
+/** @brief Set QSPI Fifo threshold.
+ * @param hqspi: QSPI handle.
+ * @param Threshold: Threshold of the Fifo (value between 1 and 16).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+ {
+ /* Synchronize init structure with new FIFO threshold value */
+ hqspi->Init.FifoThreshold = Threshold;
+
+ /* Configure QSPI FIFO Threshold */
+ MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES,
+ ((hqspi->Init.FifoThreshold - 1) << POSITION_VAL(QUADSPI_CR_FTHRES)));
+ }
+ else
+ {
+ status = HAL_BUSY;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hqspi);
+
+ /* Return function status */
+ return status;
+}
+
+/** @brief Get QSPI Fifo threshold.
+ * @param hqspi: QSPI handle.
+ * @retval Fifo threshold (value between 1 and 16)
+ */
+uint32_t HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi)
+{
+ return ((READ_BIT(hqspi->Instance->CR, QUADSPI_CR_FTHRES) >> POSITION_VAL(QUADSPI_CR_FTHRES)) + 1);
+}
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+ * @brief DMA QSPI receive process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hqspi->RxXferCount = 0;
+
+ /* Enable the QSPI transfer complete Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
+}
+
+/**
+ * @brief DMA QSPI transmit process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hqspi->TxXferCount = 0;
+
+ /* Enable the QSPI transfer complete Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
+}
+
+/**
+ * @brief DMA QSPI receive process half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_QSPI_RxHalfCpltCallback(hqspi);
+}
+
+/**
+ * @brief DMA QSPI transmit process half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_QSPI_TxHalfCpltCallback(hqspi);
+}
+
+/**
+ * @brief DMA QSPI communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void QSPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* if DMA error is FIFO error ignore it */
+ if(HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE)
+ {
+ hqspi->RxXferCount = 0;
+ hqspi->TxXferCount = 0;
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA;
+
+ /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+ CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+ /* Abort the QSPI */
+ HAL_QSPI_Abort_IT(hqspi);
+ }
+}
+
+/**
+ * @brief DMA QSPI abort complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void QSPI_DMAAbortCplt(DMA_HandleTypeDef *hdma)
+{
+ QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ hqspi->RxXferCount = 0;
+ hqspi->TxXferCount = 0;
+
+ if(hqspi->State == HAL_QSPI_STATE_ABORT)
+ {
+ /* DMA Abort called by QSPI abort */
+ /* Clear interrupt */
+ __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+ /* Enable the QSPI Transfer Complete Interrupt */
+ __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
+
+ /* Configure QSPI: CR register with Abort request */
+ SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+ }
+ else
+ {
+ /* DMA Abort called due to a transfer error interrupt */
+ /* Change state of QSPI */
+ hqspi->State = HAL_QSPI_STATE_READY;
+
+ /* Error callback */
+ HAL_QSPI_ErrorCallback(hqspi);
+ }
+}
+/**
+ * @brief Wait for a flag state until timeout.
+ * @param hqspi: QSPI handle
+ * @param Flag: Flag checked
+ * @param State: Value of the flag expected
+ * @param Timeout: Duration of the time out
+ * @param tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag,
+ FlagStatus State, uint32_t tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is in expected state */
+ while((FlagStatus)(__HAL_QSPI_GET_FLAG(hqspi, Flag)) != State)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hqspi->State = HAL_QSPI_STATE_ERROR;
+ hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT;
+
+ return HAL_ERROR;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the communication registers.
+ * @param hqspi: QSPI handle
+ * @param cmd: structure that contains the command configuration information
+ * @param FunctionalMode: functional mode to configured
+ * This parameter can be one of the following values:
+ * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE: Indirect write mode
+ * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_READ: Indirect read mode
+ * @arg QSPI_FUNCTIONAL_MODE_AUTO_POLLING: Automatic polling mode
+ * @arg QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED: Memory-mapped mode
+ * @retval None
+ */
+static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode)
+{
+ assert_param(IS_QSPI_FUNCTIONAL_MODE(FunctionalMode));
+
+ if ((cmd->DataMode != QSPI_DATA_NONE) && (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
+ {
+ /* Configure QSPI: DLR register with the number of data to read or write */
+ WRITE_REG(hqspi->Instance->DLR, (cmd->NbData - 1));
+ }
+
+ if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+ {
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ /* Configure QSPI: ABR register with alternate bytes value */
+ WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
+
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ /*---- Command with instruction, address and alternate bytes ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+ cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
+ cmd->InstructionMode | cmd->Instruction | FunctionalMode));
+
+ if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+ {
+ /* Configure QSPI: AR register with address value */
+ WRITE_REG(hqspi->Instance->AR, cmd->Address);
+ }
+ }
+ else
+ {
+ /*---- Command with instruction and alternate bytes ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+ cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode |
+ cmd->Instruction | FunctionalMode));
+ }
+ }
+ else
+ {
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ /*---- Command with instruction and address ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+ cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode |
+ cmd->Instruction | FunctionalMode));
+
+ if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+ {
+ /* Configure QSPI: AR register with address value */
+ WRITE_REG(hqspi->Instance->AR, cmd->Address);
+ }
+ }
+ else
+ {
+ /*---- Command with only instruction ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+ cmd->AddressMode | cmd->InstructionMode | cmd->Instruction |
+ FunctionalMode));
+ }
+ }
+ }
+ else
+ {
+ if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+ {
+ /* Configure QSPI: ABR register with alternate bytes value */
+ WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
+
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ /*---- Command with address and alternate bytes ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+ cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
+ cmd->InstructionMode | FunctionalMode));
+
+ if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+ {
+ /* Configure QSPI: AR register with address value */
+ WRITE_REG(hqspi->Instance->AR, cmd->Address);
+ }
+ }
+ else
+ {
+ /*---- Command with only alternate bytes ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+ cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode |
+ FunctionalMode));
+ }
+ }
+ else
+ {
+ if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+ {
+ /*---- Command with only address ----*/
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+ cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode |
+ FunctionalMode));
+
+ if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+ {
+ /* Configure QSPI: AR register with address value */
+ WRITE_REG(hqspi->Instance->AR, cmd->Address);
+ }
+ }
+ else
+ {
+ /*---- Command with only data phase ----*/
+ if (cmd->DataMode != QSPI_DATA_NONE)
+ {
+ /* Configure QSPI: CCR register with all communications parameters */
+ WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+ cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+ cmd->AddressMode | cmd->InstructionMode | FunctionalMode));
+ }
+ }
+ }
+ }
+}
+/**
+ * @}
+ */
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx */
+
+#endif /* HAL_QSPI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_qspi.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,784 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_qspi.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of QSPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_QSPI_H
+#define __STM32F4xx_HAL_QSPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup QSPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Types QSPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief QSPI Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t ClockPrescaler; /* Specifies the prescaler factor for generating clock based on the AHB clock.
+ This parameter can be a number between 0 and 255 */
+
+ uint32_t FifoThreshold; /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode)
+ This parameter can be a value between 1 and 32 */
+
+ uint32_t SampleShifting; /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to
+ take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode)
+ This parameter can be a value of @ref QSPI_SampleShifting */
+
+ uint32_t FlashSize; /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits
+ required to address the flash memory. The flash capacity can be up to 4GB
+ (addressed using 32 bits) in indirect mode, but the addressable space in
+ memory-mapped mode is limited to 256MB
+ This parameter can be a number between 0 and 31 */
+
+ uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number
+ of clock cycles which the chip select must remain high between commands.
+ This parameter can be a value of @ref QSPI_ChipSelectHighTime */
+
+ uint32_t ClockMode; /* Specifies the Clock Mode. It indicates the level that clock takes between commands.
+ This parameter can be a value of @ref QSPI_ClockMode */
+
+ uint32_t FlashID; /* Specifies the Flash which will be used,
+ This parameter can be a value of @ref QSPI_Flash_Select */
+
+ uint32_t DualFlash; /* Specifies the Dual Flash Mode State
+ This parameter can be a value of @ref QSPI_DualFlash_Mode */
+}QSPI_InitTypeDef;
+
+/**
+ * @brief HAL QSPI State structures definition
+ */
+typedef enum
+{
+ HAL_QSPI_STATE_RESET = 0x00U, /*!< Peripheral not initialized */
+ HAL_QSPI_STATE_READY = 0x01U, /*!< Peripheral initialized and ready for use */
+ HAL_QSPI_STATE_BUSY = 0x02U, /*!< Peripheral in indirect mode and busy */
+ HAL_QSPI_STATE_BUSY_INDIRECT_TX = 0x12U, /*!< Peripheral in indirect mode with transmission ongoing */
+ HAL_QSPI_STATE_BUSY_INDIRECT_RX = 0x22U, /*!< Peripheral in indirect mode with reception ongoing */
+ HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42U, /*!< Peripheral in auto polling mode ongoing */
+ HAL_QSPI_STATE_BUSY_MEM_MAPPED = 0x82U, /*!< Peripheral in memory mapped mode ongoing */
+ HAL_QSPI_STATE_ABORT = 0x08U, /*!< Peripheral with abort request ongoing */
+ HAL_QSPI_STATE_ERROR = 0x04U /*!< Peripheral in error */
+}HAL_QSPI_StateTypeDef;
+
+/**
+ * @brief QSPI Handle Structure definition
+ */
+typedef struct
+{
+ QUADSPI_TypeDef *Instance; /* QSPI registers base address */
+ QSPI_InitTypeDef Init; /* QSPI communication parameters */
+ uint8_t *pTxBuffPtr; /* Pointer to QSPI Tx transfer Buffer */
+ __IO uint16_t TxXferSize; /* QSPI Tx Transfer size */
+ __IO uint16_t TxXferCount; /* QSPI Tx Transfer Counter */
+ uint8_t *pRxBuffPtr; /* Pointer to QSPI Rx transfer Buffer */
+ __IO uint16_t RxXferSize; /* QSPI Rx Transfer size */
+ __IO uint16_t RxXferCount; /* QSPI Rx Transfer Counter */
+ DMA_HandleTypeDef *hdma; /* QSPI Rx/Tx DMA Handle parameters */
+ __IO HAL_LockTypeDef Lock; /* Locking object */
+ __IO HAL_QSPI_StateTypeDef State; /* QSPI communication state */
+ __IO uint32_t ErrorCode; /* QSPI Error code */
+ uint32_t Timeout; /* Timeout for the QSPI memory access */
+}QSPI_HandleTypeDef;
+
+/**
+ * @brief QSPI Command structure definition
+ */
+typedef struct
+{
+ uint32_t Instruction; /* Specifies the Instruction to be sent
+ This parameter can be a value (8-bit) between 0x00 and 0xFF */
+ uint32_t Address; /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize)
+ This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFFU */
+ uint32_t AlternateBytes; /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize)
+ This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFFU */
+ uint32_t AddressSize; /* Specifies the Address Size
+ This parameter can be a value of @ref QSPI_AddressSize */
+ uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size
+ This parameter can be a value of @ref QSPI_AlternateBytesSize */
+ uint32_t DummyCycles; /* Specifies the Number of Dummy Cycles.
+ This parameter can be a number between 0 and 31 */
+ uint32_t InstructionMode; /* Specifies the Instruction Mode
+ This parameter can be a value of @ref QSPI_InstructionMode */
+ uint32_t AddressMode; /* Specifies the Address Mode
+ This parameter can be a value of @ref QSPI_AddressMode */
+ uint32_t AlternateByteMode; /* Specifies the Alternate Bytes Mode
+ This parameter can be a value of @ref QSPI_AlternateBytesMode */
+ uint32_t DataMode; /* Specifies the Data Mode (used for dummy cycles and data phases)
+ This parameter can be a value of @ref QSPI_DataMode */
+ uint32_t NbData; /* Specifies the number of data to transfer.
+ This parameter can be any value between 0 and 0xFFFFFFFFU (0 means undefined length
+ until end of memory)*/
+ uint32_t DdrMode; /* Specifies the double data rate mode for address, alternate byte and data phase
+ This parameter can be a value of @ref QSPI_DdrMode */
+ uint32_t DdrHoldHalfCycle; /* Specifies the DDR hold half cycle. It delays the data output by one half of
+ system clock in DDR mode.
+ This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */
+ uint32_t SIOOMode; /* Specifies the send instruction only once mode
+ This parameter can be a value of @ref QSPI_SIOOMode */
+}QSPI_CommandTypeDef;
+
+/**
+ * @brief QSPI Auto Polling mode configuration structure definition
+ */
+typedef struct
+{
+ uint32_t Match; /* Specifies the value to be compared with the masked status register to get a match.
+ This parameter can be any value between 0 and 0xFFFFFFFFU */
+ uint32_t Mask; /* Specifies the mask to be applied to the status bytes received.
+ This parameter can be any value between 0 and 0xFFFFFFFFU */
+ uint32_t Interval; /* Specifies the number of clock cycles between two read during automatic polling phases.
+ This parameter can be any value between 0 and 0xFFFFU */
+ uint32_t StatusBytesSize; /* Specifies the size of the status bytes received.
+ This parameter can be any value between 1 and 4 */
+ uint32_t MatchMode; /* Specifies the method used for determining a match.
+ This parameter can be a value of @ref QSPI_MatchMode */
+ uint32_t AutomaticStop; /* Specifies if automatic polling is stopped after a match.
+ This parameter can be a value of @ref QSPI_AutomaticStop */
+}QSPI_AutoPollingTypeDef;
+
+/**
+ * @brief QSPI Memory Mapped mode configuration structure definition
+ */
+typedef struct
+{
+ uint32_t TimeOutPeriod; /* Specifies the number of clock to wait when the FIFO is full before to release the chip select.
+ This parameter can be any value between 0 and 0xFFFFU */
+ uint32_t TimeOutActivation; /* Specifies if the time out counter is enabled to release the chip select.
+ This parameter can be a value of @ref QSPI_TimeOutActivation */
+}QSPI_MemoryMappedTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Constants QSPI Exported Constants
+ * @{
+ */
+/** @defgroup QSPI_ErrorCode QSPI Error Code
+ * @{
+ */
+#define HAL_QSPI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_QSPI_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */
+#define HAL_QSPI_ERROR_TRANSFER ((uint32_t)0x00000002U) /*!< Transfer error */
+#define HAL_QSPI_ERROR_DMA ((uint32_t)0x00000004U) /*!< DMA transfer error */
+#define HAL_QSPI_ERROR_INVALID_PARAM ((uint32_t)0x00000008U) /*!< Invalid parameters error */
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_SampleShifting QSPI Sample Shifting
+ * @{
+ */
+#define QSPI_SAMPLE_SHIFTING_NONE ((uint32_t)0x00000000U) /*!<No clock cycle shift to sample data*/
+#define QSPI_SAMPLE_SHIFTING_HALFCYCLE ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_ChipSelectHighTime QSPI Chip Select High Time
+ * @{
+ */
+#define QSPI_CS_HIGH_TIME_1_CYCLE ((uint32_t)0x00000000U) /*!<nCS stay high for at least 1 clock cycle between commands*/
+#define QSPI_CS_HIGH_TIME_2_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 2 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_3_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 3 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_4_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_5_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2) /*!<nCS stay high for at least 5 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_6_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_7_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_8_CYCLE ((uint32_t)QUADSPI_DCR_CSHT) /*!<nCS stay high for at least 8 clock cycles between commands*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_ClockMode QSPI Clock Mode
+ * @{
+ */
+#define QSPI_CLOCK_MODE_0 ((uint32_t)0x00000000U) /*!<Clk stays low while nCS is released*/
+#define QSPI_CLOCK_MODE_3 ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Flash_Select QSPI Flash Select
+ * @{
+ */
+#define QSPI_FLASH_ID_1 ((uint32_t)0x00000000U)
+#define QSPI_FLASH_ID_2 ((uint32_t)QUADSPI_CR_FSEL)
+/**
+ * @}
+ */
+
+ /** @defgroup QSPI_DualFlash_Mode QSPI Dual Flash Mode
+ * @{
+ */
+#define QSPI_DUALFLASH_ENABLE ((uint32_t)QUADSPI_CR_DFM)
+#define QSPI_DUALFLASH_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AddressSize QSPI Address Size
+ * @{
+ */
+#define QSPI_ADDRESS_8_BITS ((uint32_t)0x00000000U) /*!<8-bit address*/
+#define QSPI_ADDRESS_16_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/
+#define QSPI_ADDRESS_24_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/
+#define QSPI_ADDRESS_32_BITS ((uint32_t)QUADSPI_CCR_ADSIZE) /*!<32-bit address*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size
+ * @{
+ */
+#define QSPI_ALTERNATE_BYTES_8_BITS ((uint32_t)0x00000000U) /*!<8-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_16_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_24_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_32_BITS ((uint32_t)QUADSPI_CCR_ABSIZE) /*!<32-bit alternate bytes*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_InstructionMode QSPI Instruction Mode
+* @{
+*/
+#define QSPI_INSTRUCTION_NONE ((uint32_t)0x00000000U) /*!<No instruction*/
+#define QSPI_INSTRUCTION_1_LINE ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/
+#define QSPI_INSTRUCTION_2_LINES ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/
+#define QSPI_INSTRUCTION_4_LINES ((uint32_t)QUADSPI_CCR_IMODE) /*!<Instruction on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AddressMode QSPI Address Mode
+* @{
+*/
+#define QSPI_ADDRESS_NONE ((uint32_t)0x00000000U) /*!<No address*/
+#define QSPI_ADDRESS_1_LINE ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/
+#define QSPI_ADDRESS_2_LINES ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/
+#define QSPI_ADDRESS_4_LINES ((uint32_t)QUADSPI_CCR_ADMODE) /*!<Address on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AlternateBytesMode QSPI Alternate Bytes Mode
+* @{
+*/
+#define QSPI_ALTERNATE_BYTES_NONE ((uint32_t)0x00000000U) /*!<No alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_1_LINE ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/
+#define QSPI_ALTERNATE_BYTES_2_LINES ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/
+#define QSPI_ALTERNATE_BYTES_4_LINES ((uint32_t)QUADSPI_CCR_ABMODE) /*!<Alternate bytes on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DataMode QSPI Data Mode
+ * @{
+ */
+#define QSPI_DATA_NONE ((uint32_t)0x00000000U) /*!<No data*/
+#define QSPI_DATA_1_LINE ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/
+#define QSPI_DATA_2_LINES ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/
+#define QSPI_DATA_4_LINES ((uint32_t)QUADSPI_CCR_DMODE) /*!<Data on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DdrMode QSPI Ddr Mode
+ * @{
+ */
+#define QSPI_DDR_MODE_DISABLE ((uint32_t)0x00000000U) /*!<Double data rate mode disabled*/
+#define QSPI_DDR_MODE_ENABLE ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DdrHoldHalfCycle QSPI Ddr HoldHalfCycle
+ * @{
+ */
+#define QSPI_DDR_HHC_ANALOG_DELAY ((uint32_t)0x00000000U) /*!<Delay the data output using analog delay in DDR mode*/
+#define QSPI_DDR_HHC_HALF_CLK_DELAY ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by 1/2 clock cycle in DDR mode*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_SIOOMode QSPI SIOO Mode
+ * @{
+ */
+#define QSPI_SIOO_INST_EVERY_CMD ((uint32_t)0x00000000U) /*!<Send instruction on every transaction*/
+#define QSPI_SIOO_INST_ONLY_FIRST_CMD ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_MatchMode QSPI Match Mode
+ * @{
+ */
+#define QSPI_MATCH_MODE_AND ((uint32_t)0x00000000U) /*!<AND match mode between unmasked bits*/
+#define QSPI_MATCH_MODE_OR ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop
+ * @{
+ */
+#define QSPI_AUTOMATIC_STOP_DISABLE ((uint32_t)0x00000000U) /*!<AutoPolling stops only with abort or QSPI disabling*/
+#define QSPI_AUTOMATIC_STOP_ENABLE ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_TimeOutActivation QSPI TimeOut Activation
+ * @{
+ */
+#define QSPI_TIMEOUT_COUNTER_DISABLE ((uint32_t)0x00000000U) /*!<Timeout counter disabled, nCS remains active*/
+#define QSPI_TIMEOUT_COUNTER_ENABLE ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Flags QSPI Flags
+ * @{
+ */
+#define QSPI_FLAG_BUSY QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/
+#define QSPI_FLAG_TO QUADSPI_SR_TOF /*!<Timeout flag: timeout occurs in memory-mapped mode*/
+#define QSPI_FLAG_SM QUADSPI_SR_SMF /*!<Status match flag: received data matches in autopolling mode*/
+#define QSPI_FLAG_FT QUADSPI_SR_FTF /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/
+#define QSPI_FLAG_TC QUADSPI_SR_TCF /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/
+#define QSPI_FLAG_TE QUADSPI_SR_TEF /*!<Transfer error flag: invalid address is being accessed*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Interrupts QSPI Interrupts
+ * @{
+ */
+#define QSPI_IT_TO QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/
+#define QSPI_IT_SM QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/
+#define QSPI_IT_FT QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/
+#define QSPI_IT_TC QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/
+#define QSPI_IT_TE QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Timeout_definition QSPI Timeout definition
+ * @{
+ */
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000U)/* 5 s */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Macros QSPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset QSPI handle state
+ * @param __HANDLE__: QSPI handle.
+ * @retval None
+ */
+#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_QSPI_STATE_RESET)
+
+/** @brief Enable QSPI
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @retval None
+ */
+#define __HAL_QSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief Disable QSPI
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @retval None
+ */
+#define __HAL_QSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief Enables the specified QSPI interrupt.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Time out interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval None
+ */
+#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+
+/** @brief Disables the specified QSPI interrupt.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Timeout interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval None
+ */
+#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+/** @brief Checks whether the specified QSPI interrupt source is enabled.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Time out interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Get the selected QSPI's flag status.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __FLAG__: specifies the QSPI flag to check.
+ * This parameter can be one of the following values:
+ * @arg QSPI_FLAG_BUSY: QSPI Busy flag
+ * @arg QSPI_FLAG_TO: QSPI Time out flag
+ * @arg QSPI_FLAG_SM: QSPI Status match flag
+ * @arg QSPI_FLAG_FT: QSPI FIFO threshold flag
+ * @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+ * @arg QSPI_FLAG_TE: QSPI Transfer error flag
+ * @retval None
+ */
+#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0U)
+
+/** @brief Clears the specified QSPI's flag status.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __FLAG__: specifies the QSPI clear register flag that needs to be set
+ * This parameter can be one of the following values:
+ * @arg QSPI_FLAG_TO: QSPI Time out flag
+ * @arg QSPI_FLAG_SM: QSPI Status match flag
+ * @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+ * @arg QSPI_FLAG_TE: QSPI Transfer error flag
+ * @retval None
+ */
+#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup QSPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_QSPI_Init (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_DeInit (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_MspInit (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi);
+/**
+ * @}
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+/* QSPI IRQ handler method */
+void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+HAL_StatusTypeDef HAL_QSPI_Command (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Transmit (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Receive (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Command_IT (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd);
+HAL_StatusTypeDef HAL_QSPI_Transmit_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Receive_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Receive_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+
+/* QSPI status flag polling mode */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg);
+
+/* QSPI memory-mapped mode */
+HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg);
+/**
+ * @}
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group3
+ * @{
+ */
+/* Callback functions in non-blocking modes ***********************************/
+void HAL_QSPI_ErrorCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_AbortCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+void HAL_QSPI_CmdCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_RxCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_TxCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_RxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_TxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI status flag polling mode */
+void HAL_QSPI_StatusMatchCallback (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI memory-mapped mode */
+void HAL_QSPI_TimeOutCallback (QSPI_HandleTypeDef *hqspi);
+/**
+ * @}
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState (QSPI_HandleTypeDef *hqspi);
+uint32_t HAL_QSPI_GetError (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_Abort (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_Abort_IT (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_SetTimeout (QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold);
+uint32_t HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi);
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup QSPI_Private_Macros QSPI Private Macros
+ * @{
+ */
+/** @defgroup QSPI_ClockPrescaler QSPI Clock Prescaler
+ * @{
+ */
+#define IS_QSPI_CLOCK_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFU)
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_FifoThreshold QSPI Fifo Threshold
+ * @{
+ */
+#define IS_QSPI_FIFO_THRESHOLD(THR) (((THR) > 0U) && ((THR) <= 32U))
+/**
+ * @}
+ */
+
+#define IS_QSPI_SSHIFT(SSHIFT) (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \
+ ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE))
+
+/** @defgroup QSPI_FlashSize QSPI Flash Size
+ * @{
+ */
+#define IS_QSPI_FLASH_SIZE(FSIZE) (((FSIZE) <= 31U))
+/**
+ * @}
+ */
+
+#define IS_QSPI_CS_HIGH_TIME(CSHTIME) (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE))
+
+#define IS_QSPI_CLOCK_MODE(CLKMODE) (((CLKMODE) == QSPI_CLOCK_MODE_0) || \
+ ((CLKMODE) == QSPI_CLOCK_MODE_3))
+
+#define IS_QSPI_FLASH_ID(FLA) (((FLA) == QSPI_FLASH_ID_1) || \
+ ((FLA) == QSPI_FLASH_ID_2))
+
+#define IS_QSPI_DUAL_FLASH_MODE(MODE) (((MODE) == QSPI_DUALFLASH_ENABLE) || \
+ ((MODE) == QSPI_DUALFLASH_DISABLE))
+
+
+/** @defgroup QSPI_Instruction QSPI Instruction
+ * @{
+ */
+#define IS_QSPI_INSTRUCTION(INSTRUCTION) ((INSTRUCTION) <= 0xFFU)
+/**
+ * @}
+ */
+
+#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE) (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS))
+
+#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE) (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS))
+
+
+/** @defgroup QSPI_DummyCycles QSPI Dummy Cycles
+ * @{
+ */
+#define IS_QSPI_DUMMY_CYCLES(DCY) ((DCY) <= 31U)
+/**
+ * @}
+ */
+
+#define IS_QSPI_INSTRUCTION_MODE(MODE) (((MODE) == QSPI_INSTRUCTION_NONE) || \
+ ((MODE) == QSPI_INSTRUCTION_1_LINE) || \
+ ((MODE) == QSPI_INSTRUCTION_2_LINES) || \
+ ((MODE) == QSPI_INSTRUCTION_4_LINES))
+
+#define IS_QSPI_ADDRESS_MODE(MODE) (((MODE) == QSPI_ADDRESS_NONE) || \
+ ((MODE) == QSPI_ADDRESS_1_LINE) || \
+ ((MODE) == QSPI_ADDRESS_2_LINES) || \
+ ((MODE) == QSPI_ADDRESS_4_LINES))
+
+#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE) (((MODE) == QSPI_ALTERNATE_BYTES_NONE) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES))
+
+#define IS_QSPI_DATA_MODE(MODE) (((MODE) == QSPI_DATA_NONE) || \
+ ((MODE) == QSPI_DATA_1_LINE) || \
+ ((MODE) == QSPI_DATA_2_LINES) || \
+ ((MODE) == QSPI_DATA_4_LINES))
+
+#define IS_QSPI_DDR_MODE(DDR_MODE) (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \
+ ((DDR_MODE) == QSPI_DDR_MODE_ENABLE))
+
+#define IS_QSPI_DDR_HHC(DDR_HHC) (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \
+ ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY))
+
+#define IS_QSPI_SIOO_MODE(SIOO_MODE) (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \
+ ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD))
+
+/** @defgroup QSPI_Interval QSPI Interval
+ * @{
+ */
+#define IS_QSPI_INTERVAL(INTERVAL) ((INTERVAL) <= QUADSPI_PIR_INTERVAL)
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_StatusBytesSize QSPI Status Bytes Size
+ * @{
+ */
+#define IS_QSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1U) && ((SIZE) <= 4U))
+/**
+ * @}
+ */
+#define IS_QSPI_MATCH_MODE(MODE) (((MODE) == QSPI_MATCH_MODE_AND) || \
+ ((MODE) == QSPI_MATCH_MODE_OR))
+
+#define IS_QSPI_AUTOMATIC_STOP(APMS) (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \
+ ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE))
+
+#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN) (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \
+ ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE))
+
+/** @defgroup QSPI_TimeOutPeriod QSPI TimeOut Period
+ * @{
+ */
+#define IS_QSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFFU)
+/**
+ * @}
+ */
+
+#define IS_QSPI_GET_FLAG(FLAG) (((FLAG) == QSPI_FLAG_BUSY) || \
+ ((FLAG) == QSPI_FLAG_TO) || \
+ ((FLAG) == QSPI_FLAG_SM) || \
+ ((FLAG) == QSPI_FLAG_FT) || \
+ ((FLAG) == QSPI_FLAG_TC) || \
+ ((FLAG) == QSPI_FLAG_TE))
+
+#define IS_QSPI_IT(IT) ((((IT) & (uint32_t)0xFFE0FFFFU) == 0x00000000U) && ((IT) != 0x00000000U))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Functions QSPI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_QSPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1108 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Reset and Clock Control (RCC) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### RCC specific features #####
+ ==============================================================================
+ [..]
+ After reset the device is running from Internal High Speed oscillator
+ (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
+ and I-Cache are disabled, and all peripherals are off except internal
+ SRAM, Flash and JTAG.
+ (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
+ all peripherals mapped on these busses are running at HSI speed.
+ (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+ (+) All GPIOs are in input floating state, except the JTAG pins which
+ are assigned to be used for debug purpose.
+
+ [..]
+ Once the device started from reset, the user application has to:
+ (+) Configure the clock source to be used to drive the System clock
+ (if the application needs higher frequency/performance)
+ (+) Configure the System clock frequency and Flash settings
+ (+) Configure the AHB and APB busses prescalers
+ (+) Enable the clock for the peripheral(s) to be used
+ (+) Configure the clock source(s) for peripherals which clocks are not
+ derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
+
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
+ after the clock enable bit is set on the hardware register
+ (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
+ after the clock enable bit is set on the hardware register
+
+ [..]
+ Implemented Workaround:
+ (+) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCC RCC
+ * @brief RCC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup RCC_Private_Constants
+ * @{
+ */
+#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000U) /* 5 s */
+
+/* Private macro -------------------------------------------------------------*/
+#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT GPIOA
+#define MCO1_PIN GPIO_PIN_8
+
+#define __MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
+#define MCO2_GPIO_PORT GPIOC
+#define MCO2_PIN GPIO_PIN_9
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+ * @{
+ */
+const uint8_t APBAHBPrescTable[16] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to configure the internal/external oscillators
+ (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1
+ and APB2).
+
+ [..] Internal/external clock and PLL configuration
+ (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
+ the PLL as System clock source.
+
+ (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
+ clock source.
+
+ (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
+ through the PLL as System clock source. Can be used also as RTC clock source.
+
+ (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+ (#) PLL (clocked by HSI or HSE), featuring two different output clocks:
+ (++) The first output is used to generate the high speed system clock (up to 168 MHz)
+ (++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
+ the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
+
+ (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
+ and if a HSE clock failure occurs(HSE used directly or through PLL as System
+ clock source), the System clocks automatically switched to HSI and an interrupt
+ is generated if enabled. The interrupt is linked to the Cortex-M4 NMI
+ (Non-Maskable Interrupt) exception vector.
+
+ (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
+ clock (through a configurable prescaler) on PA8 pin.
+
+ (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
+ clock (through a configurable prescaler) on PC9 pin.
+
+ [..] System, AHB and APB busses clocks configuration
+ (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+ HSE and PLL.
+ The AHB clock (HCLK) is derived from System clock through configurable
+ prescaler and used to clock the CPU, memory and peripherals mapped
+ on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
+ from AHB clock through configurable prescalers and used to clock
+ the peripherals mapped on these busses. You can use
+ "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+ (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum
+ frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz.
+ Depending on the device voltage range, the maximum frequency should
+ be adapted accordingly (refer to the product datasheets for more details).
+
+ (#) For the STM32F42xxx, STM32F43xxx, STM32F446xx, STM32F469xx and STM32F479xx devices,
+ the maximum frequency of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz.
+ Depending on the device voltage range, the maximum frequency should
+ be adapted accordingly (refer to the product datasheets for more details).
+
+ (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz,
+ PCLK2 84 MHz and PCLK1 42 MHz.
+ Depending on the device voltage range, the maximum frequency should
+ be adapted accordingly (refer to the product datasheets for more details).
+
+ (#) For the STM32F41xxx, the maximum frequency of the SYSCLK and HCLK is 100 MHz,
+ PCLK2 100 MHz and PCLK1 50 MHz.
+ Depending on the device voltage range, the maximum frequency should
+ be adapted accordingly (refer to the product datasheets for more details).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE and PLL OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO1 and MCO2 OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+__weak void HAL_RCC_DeInit(void)
+{}
+
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+ * supported by this API. User should request a transition to LSE Off
+ * first and then LSE On or LSE Bypass.
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this API. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+ /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+ /* Check the HSE State */
+ if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is bypassed or disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+ {
+ /* When HSI is used as system clock it will not disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Wait for Backup domain Write protection enable */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+ assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+ assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+ assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the main PLL clock source, multiplication and division factors. */
+ WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \
+ RCC_OscInitStruct->PLL.PLLM | \
+ (RCC_OscInitStruct->PLL.PLLN << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
+ (RCC_OscInitStruct->PLL.PLLQ << POSITION_VAL(RCC_PLLCFGR_PLLQ))));
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CPU, AHB and APB busses clocks according to the specified
+ * parameters in the RCC_ClkInitStruct.
+ * @param RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC peripheral.
+ * @param FLatency: FLASH Latency, this parameter depend on device selected
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated by HAL_RCC_GetHCLKFreq() function called within this function
+ *
+ * @note The HSI is used (enabled by hardware) as system clock source after
+ * startup from Reset, wake-up from STOP and STANDBY mode, or in case
+ * of failure of the HSE used directly or indirectly as system clock
+ * (if the Clock Security System CSS is enabled).
+ *
+ * @note A switch from one clock source to another occurs only if the target
+ * clock source is ready (clock stable after startup delay or PLL locked).
+ * If a clock source which is not yet ready is selected, the switch will
+ * occur when the clock source will be ready.
+ *
+ * @note Depending on the device voltage range, the software has to set correctly
+ * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
+ * (for more details refer to section above "Initialization/de-initialization functions")
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+ assert_param(IS_FLASH_LATENCY(FLatency));
+
+ /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+ must be correctly programmed according to the frequency of the CPU clock
+ (HCLK) and the supply voltage of the device. */
+
+ /* Increasing the number of wait states because of higher CPU frequency */
+ if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) ||
+ (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK))
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLRCLK)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+
+ /* Decreasing the number of wait states because of lower CPU frequency */
+ if(FLatency < (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- PCLK1 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
+ }
+
+ /*-------------------------- PCLK2 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U));
+ }
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HAL_RCC_GetSysClockFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> POSITION_VAL(RCC_CFGR_HPRE)];
+
+ /* Configure the source of time base considering new system clocks settings*/
+ HAL_InitTick (TICK_INT_PRIORITY);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief RCC clocks control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
+ * @note PA8/PC9 should be configured in alternate function mode.
+ * @param RCC_MCOx: specifies the output direction for the clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
+ * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
+ * @param RCC_MCOSource: specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+ * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
+ * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
+ * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+ * @param RCC_MCODiv: specifies the MCOx prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ * @note For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have
+ * at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
+ * @retval None
+ */
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCOx));
+ assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+ /* RCC_MCO1 */
+ if(RCC_MCOx == RCC_MCO1)
+ {
+ assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+
+ /* MCO1 Clock Enable */
+ __MCO1_CLK_ENABLE();
+
+ /* Configure the MCO1 pin in alternate function mode */
+ GPIO_InitStruct.Pin = MCO1_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+ HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
+
+ /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv));
+
+ /* This RCC MCO1 enable feature is available only on STM32F410xx devices */
+#if defined(RCC_CFGR_MCO1EN)
+ __HAL_RCC_MCO1_ENABLE();
+#endif /* RCC_CFGR_MCO1EN */
+ }
+#if defined(RCC_CFGR_MCO2)
+ else
+ {
+ assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
+
+ /* MCO2 Clock Enable */
+ __MCO2_CLK_ENABLE();
+
+ /* Configure the MCO2 pin in alternate function mode */
+ GPIO_InitStruct.Pin = MCO2_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+ HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
+
+ /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3U)));
+
+ /* This RCC MCO2 enable feature is available only on STM32F410Rx devices */
+#if defined(RCC_CFGR_MCO2EN)
+ __HAL_RCC_MCO2_ENABLE();
+#endif /* RCC_CFGR_MCO2EN */
+ }
+#endif /* RCC_CFGR_MCO2 */
+}
+
+/**
+ * @brief Enables the Clock Security System.
+ * @note If a failure is detected on the HSE oscillator clock, this oscillator
+ * is automatically disabled and an interrupt is generated to inform the
+ * software about the failure (Clock Security System Interrupt, CSSI),
+ * allowing the MCU to perform rescue operations. The CSSI is linked to
+ * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
+ * @retval None
+ */
+void HAL_RCC_EnableCSS(void)
+{
+ *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Clock Security System.
+ * @retval None
+ */
+void HAL_RCC_DisableCSS(void)
+{
+ *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Returns the SYSCLK frequency
+ *
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+ * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baudrate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ *
+ * @retval SYSCLK frequency
+ */
+__weak uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ uint32_t pllm = 0U, pllvco = 0U, pllp = 0U;
+ uint32_t sysclockfreq = 0U;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
+ {
+ sysclockfreq = HSE_VALUE;
+ break;
+ }
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock source */
+ {
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLP */
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+ if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1U) *2U);
+
+ sysclockfreq = pllvco/pllp;
+ break;
+ }
+ default:
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ }
+ return sysclockfreq;
+}
+
+/**
+ * @brief Returns the HCLK frequency
+ * @note Each time HCLK changes, this function must be called to update the
+ * right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated within this function
+ * @retval HCLK frequency
+ */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+ return SystemCoreClock;
+}
+
+/**
+ * @brief Returns the PCLK1 frequency
+ * @note Each time PCLK1 changes, this function must be called to update the
+ * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK1 frequency
+ */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+ /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> POSITION_VAL(RCC_CFGR_PPRE1)]);
+}
+
+/**
+ * @brief Returns the PCLK2 frequency
+ * @note Each time PCLK2 changes, this function must be called to update the
+ * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK2 frequency
+ */
+uint32_t HAL_RCC_GetPCLK2Freq(void)
+{
+ /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq()>> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> POSITION_VAL(RCC_CFGR_PPRE2)]);
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+ /* Get the HSE configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+ }
+ else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+ }
+
+ /* Get the HSI configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+
+ /* Get the LSE configuration -----------------------------------------------*/
+ if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+ }
+ else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+ }
+
+ /* Get the LSI configuration -----------------------------------------------*/
+ if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+ }
+
+ /* Get the PLL configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+ }
+ RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+ RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+ RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
+ RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
+ RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
+}
+
+/**
+ * @brief Configures the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that
+ * will be configured.
+ * @param pFLatency: Pointer on the Flash Latency.
+ * @retval None
+ */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+ /* Set all possible values for the Clock type parameter --------------------*/
+ RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+
+ /* Get the SYSCLK configuration --------------------------------------------*/
+ RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+
+ /* Get the HCLK configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+ /* Get the APB1 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
+
+ /* Get the APB2 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U);
+
+ /* Get the Flash Wait State (Latency) configuration ------------------------*/
+ *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
+}
+
+/**
+ * @brief This function handles the RCC CSS interrupt request.
+ * @note This API should be called under the NMI_Handler().
+ * @retval None
+ */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+ /* Check RCC CSSF flag */
+ if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+ {
+ /* RCC Clock Security System interrupt user callback */
+ HAL_RCC_CSSCallback();
+
+ /* Clear RCC CSS pending bit */
+ __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+ }
+}
+
+/**
+ * @brief RCC Clock Security System interrupt callback
+ * @retval None
+ */
+__weak void HAL_RCC_CSSCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RCC_CSSCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1424 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_H
+#define __STM32F4xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/* Include RCC HAL Extended module */
+/* (include on top of file since RCC structures are defined in extended file) */
+#include "stm32f4xx_hal_rcc_ex.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000U)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001U)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002U)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004U)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint8_t)0x00U)
+#define RCC_HSE_ON ((uint8_t)0x01U)
+#define RCC_HSE_BYPASS ((uint8_t)0x05U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config LSE Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint8_t)0x00U)
+#define RCC_LSE_ON ((uint8_t)0x01U)
+#define RCC_LSE_BYPASS ((uint8_t)0x05U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint8_t)0x00U)
+#define RCC_HSI_ON ((uint8_t)0x01U)
+
+#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10U) /* Default HSI calibration trimming value */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint8_t)0x00U)
+#define RCC_LSI_ON ((uint8_t)0x01U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint8_t)0x00U)
+#define RCC_PLL_OFF ((uint8_t)0x01U)
+#define RCC_PLL_ON ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
+ * @{
+ */
+#define RCC_PLLP_DIV2 ((uint32_t)0x00000002U)
+#define RCC_PLLP_DIV4 ((uint32_t)0x00000004U)
+#define RCC_PLLP_DIV6 ((uint32_t)0x00000006U)
+#define RCC_PLLP_DIV8 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI
+#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001U)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002U)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004U)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+#define RCC_SYSCLKSOURCE_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SWS_0 | RCC_CFGR_SWS_1)) /*!< PLLR used as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100U)
+#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200U)
+#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO_Index MCO Index
+ * @{
+ */
+#define RCC_MCO1 ((uint32_t)0x00000000U)
+#define RCC_MCO2 ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000U)
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
+#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler
+ * @{
+ */
+#define RCC_MCODIV_1 ((uint32_t)0x00000000U)
+#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
+#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt Interrupts
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01U)
+#define RCC_IT_LSERDY ((uint8_t)0x02U)
+#define RCC_IT_HSIRDY ((uint8_t)0x04U)
+#define RCC_IT_HSERDY ((uint8_t)0x08U)
+#define RCC_IT_PLLRDY ((uint8_t)0x10U)
+#define RCC_IT_PLLI2SRDY ((uint8_t)0x20U)
+#define RCC_IT_CSS ((uint8_t)0x80U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag Flags
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - 0XX : Register index
+ * - 01: CR register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21U)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31U)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39U)
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3BU)
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)0x41U)
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61U)
+#define RCC_FLAG_BORRST ((uint8_t)0x79U)
+#define RCC_FLAG_PINRST ((uint8_t)0x7AU)
+#define RCC_FLAG_PORRST ((uint8_t)0x7BU)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7CU)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7DU)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7EU)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7FU)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
+#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) != RESET)
+
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) == RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_PWR_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
+
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
+
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
+#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
+
+#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U)
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
+#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U)
+#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U)
+#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
+
+#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
+
+#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
+
+#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wake-up from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value.
+ * (default is RCC_HSICALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\
+ RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE)
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro.
+ * User should request a transition to HSE Off first and then HSE On or HSE Bypass.
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator.
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_CR_BYTE2_ADDRESS = (__STATE__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
+ * User should request a transition to LSE Off first and then LSE On or LSE Bypass.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator.
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_BDCR_BYTE0_ADDRESS = (__STATE__))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE)
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE)
+
+/** @brief Macros to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wake-up source.
+ * However, when the HSE clock is used as RTC clock source, the RTC
+ * cannot be used in STOP and STANDBY modes.
+ * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
+ * RTC clock source).
+ */
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFFU)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
+ RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \
+ } while (0)
+
+/** @brief Macros to force or release the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE)
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE)
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE)
+
+/** @brief Macro to configure the PLL clock source.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLSOURCE__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ *
+ */
+#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
+
+/** @brief Macro to configure the PLL multiplication factor.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ *
+ */
+#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+ * @{
+ */
+/**
+ * @brief Macro to configure the system clock source.
+ * @param __RCC_SYSCLKSOURCE__: specifies the system clock source.
+ * This parameter can be one of the following values:
+ * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
+ * - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source.
+ */
+#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock.
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the MCO1 clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ */
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+
+/** @brief Macro to configure the MCO2 clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
+ * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
+ * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ * @note For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have
+ * at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
+ */
+#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
+
+/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
+ * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
+ * @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
+ * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
+ * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
+ * @arg RCC_FLAG_PINRST: Pin reset.
+ * @arg RCC_FLAG_PORRST: POR/PDR reset.
+ * @arg RCC_FLAG_SFTRST: Software reset.
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
+ * @arg RCC_FLAG_LPWRRST: Low Power reset.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint8_t)0x1FU)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR :((((__FLAG__) >> 5U) == 3U)? RCC->CSR :RCC->CIR))) & ((uint32_t)1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+ /** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CSSCallback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+/* Alias word address of HSION bit */
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00U)
+#define RCC_HSION_BIT_NUMBER 0x00U
+#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_HSION_BIT_NUMBER * 4U))
+/* Alias word address of CSSON bit */
+#define RCC_CSSON_BIT_NUMBER 0x13U
+#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_CSSON_BIT_NUMBER * 4U))
+/* Alias word address of PLLON bit */
+#define RCC_PLLON_BIT_NUMBER 0x18U
+#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLON_BIT_NUMBER * 4U))
+
+/* --- BDCR Register ---*/
+/* Alias word address of RTCEN bit */
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70U)
+#define RCC_RTCEN_BIT_NUMBER 0x0FU
+#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U))
+/* Alias word address of BDRST bit */
+#define RCC_BDRST_BIT_NUMBER 0x10U
+#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_BDRST_BIT_NUMBER * 4U))
+
+/* --- CSR Register ---*/
+/* Alias word address of LSION bit */
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74U)
+#define RCC_LSION_BIT_NUMBER 0x00U
+#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32U) + (RCC_LSION_BIT_NUMBER * 4U))
+
+/* CR register byte 3 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS ((uint32_t)0x40023802U)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x01U))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x02U))
+
+/* BDCR register base address */
+#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)2U)
+#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
+
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE ((uint32_t)2U) /* 2 ms */
+#define LSI_TIMEOUT_VALUE ((uint32_t)2U) /* 2 ms */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+
+/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15U)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK))
+
+#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV3) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV5) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV6) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV7) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV9) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV10) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV11) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV12) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV13) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV14) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV15) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV17) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV18) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV19) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV20) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV21) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV22) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV23) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV24) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV25) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV26) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV27) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV28) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV29) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV30) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV31))
+
+#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63U)
+
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2U) || ((VALUE) == 4U) || ((VALUE) == 6U) || ((VALUE) == 8U))
+
+#define IS_RCC_PLLQ_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 15U))
+
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
+ ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
+ ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \
+ ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
+ ((HCLK) == RCC_SYSCLK_DIV512))
+
+#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 15U))
+
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
+ ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
+ ((PCLK) == RCC_HCLK_DIV16))
+
+#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2))
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
+ ((DIV) == RCC_MCODIV_5))
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1FU)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2603 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Extension RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities RCC extension peripheral:
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCCEx RCCEx
+ * @brief RCCEx HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+ [..]
+ (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+ select the RTC clock source; in this case the Backup domain will be reset in
+ order to modify the RTC Clock source, as consequence RTC registers (including
+ the backup registers) and RCC_BDCR register are set to their reset values.
+
+@endverbatim
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE, PLL and PLLI2S OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO1 and MCO2 OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+void HAL_RCC_DeInit(void)
+{
+ /* Set HSION bit */
+ SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4);
+
+ /* Reset CFGR register */
+ CLEAR_REG(RCC->CFGR);
+
+ /* Reset HSEON, CSSON, PLLON, PLLI2S */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON| RCC_CR_PLLI2SON);
+
+ /* Reset PLLCFGR register */
+ CLEAR_REG(RCC->PLLCFGR);
+ SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2);
+
+ /* Reset PLLI2SCFGR register */
+ CLEAR_REG(RCC->PLLI2SCFGR);
+ SET_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1);
+
+ /* Reset HSEBYP bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+
+ /* Disable all interrupts */
+ CLEAR_REG(RCC->CIR);
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HSI_VALUE;
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE and PLL OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO1 and MCO2 OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+void HAL_RCC_DeInit(void)
+{
+ /* Set HSION bit */
+ SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4);
+
+ /* Reset CFGR register */
+ CLEAR_REG(RCC->CFGR);
+
+ /* Reset HSEON, CSSON, PLLON */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON);
+
+ /* Reset PLLCFGR register */
+ CLEAR_REG(RCC->PLLCFGR);
+ SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2);
+
+ /* Reset HSEBYP bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+
+ /* Disable all interrupts */
+ CLEAR_REG(RCC->CIR);
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HSI_VALUE;
+}
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F446xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, LTDC RTC and TIM).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+ uint32_t plli2sp = 0U;
+ uint32_t plli2sq = 0U;
+ uint32_t plli2sr = 0U;
+ uint32_t pllsaip = 0U;
+ uint32_t pllsaiq = 0U;
+ uint32_t plli2sused = 0U;
+ uint32_t pllsaiused = 0U;
+
+ /* Check the peripheral clock selection parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*------------------------ I2S APB1 configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- I2S APB2 configuration ----------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*--------------------------- SAI1 configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
+
+ /* Configure SAI1 Clock source */
+ __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*-------------------------- SAI2 configuration ----------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
+
+ /* Configure SAI2 Clock source */
+ __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------- RTC configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ /* Configure Timer Prescaler */
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- FMPI2C1 Configuration -----------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection));
+
+ /* Configure the FMPI2C1 clock source */
+ __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------ CEC Configuration -------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------- CLK48 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the CLK48 clock source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+ /* Enable the PLLSAI when it's used as clock source for CLK48 */
+ if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)
+ {
+ pllsaiused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------- SDIO Configuration -------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection));
+
+ /* Configure the SDIO clock source */
+ __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------ SPDIFRX Configuration ---------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifClockSelection));
+
+ /* Configure the SPDIFRX clock source */
+ __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for SPDIFRX */
+ if(PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- PLLI2S Configuration ------------------------*/
+ /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S on APB1,
+ I2S on APB2 or SPDIFRX */
+ if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* check for common PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /*------ In Case of PLLI2S is selected as source clock for I2S -----------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Read PLLI2SP/PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+ plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1U) << 1U);
+ plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)))
+ {
+ /* Check for PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ /* Check for PLLI2S/DIVQ parameters */
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SP/PLLI2SR value from PLLI2SCFGR register (this value is not needed for SAI configuration) */
+ plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1U) << 1U);
+ plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, PeriphClkInit->PLLI2S.PLLI2SQ, plli2sr);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /*------ In Case of PLLI2S is selected as source clock for SPDIFRX -------*/
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) && (PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+ /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+ plli2sq = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1U) << 1U);
+ plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */
+ /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, plli2sq, plli2sr);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected -----------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------- PLLSAI Configuration -----------------------*/
+ /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, CLK48 or SDIO */
+ if(pllsaiused == 1U)
+ {
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIM_VALUE(PeriphClkInit->PLLSAI.PLLSAIM));
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /*------ In Case of PLLSAI is selected as source clock for SAI -----------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
+ {
+ /* check for PLLSAIQ Parameter */
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ /* check for PLLSAI/DIVQ Parameter */
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1U) << 1U);
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, 0U);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*------ In Case of PLLSAI is selected as source clock for CLK48 ---------*/
+ /* In Case of PLLI2S is selected as source clock for CLK48 */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+ /* Read PLLSAIQ value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+ pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Configure the PLLSAI division factors */
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLI2SN/PLLSAIM) */
+ /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, 0U);
+ }
+
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\
+ RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMPI2C1 |\
+ RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO |\
+ RCC_PERIPHCLK_SPDIFRX;
+
+ /* Get the PLLI2S Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SM));
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1U) << 1U);
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Get the PLLSAI Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIM = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIM));
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+ PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1U) << 1U);
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+
+ /* Get the SAI1 clock configuration ----------------------------------------*/
+ PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
+
+ /* Get the SAI2 clock configuration ----------------------------------------*/
+ PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
+
+ /* Get the I2S APB1 clock configuration ------------------------------------*/
+ PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE();
+
+ /* Get the I2S APB2 clock configuration ------------------------------------*/
+ PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE();
+
+ /* Get the RTC Clock configuration -----------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the CEC clock configuration -----------------------------------------*/
+ PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+
+ /* Get the FMPI2C1 clock configuration -------------------------------------*/
+ PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE();
+
+ /* Get the CLK48 clock configuration ----------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDIO clock configuration ----------------------------------------*/
+ PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE();
+
+ /* Get the SPDIFRX clock configuration -------------------------------------*/
+ PeriphClkInit->SpdifClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE();
+
+ /* Get the TIM Prescaler configuration -------------------------------------*/
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+
+/**
+ * @brief Return the peripheral clock frequency for a given peripheral(SAI..)
+ * @note Return 0 if peripheral clock identifier not managed by this API
+ * @param PeriphClk: Peripheral clock identifier
+ * This parameter can be one of the following values:
+ * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock
+ * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock
+ * @retval Frequency in KHz
+ */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+ uint32_t tmpreg1 = 0U;
+ /* This variable used to store the SAI clock frequency (value in Hz) */
+ uint32_t frequency = 0U;
+ /* This variable used to store the VCO Input (value in Hz) */
+ uint32_t vcoinput = 0U;
+ /* This variable used to store the SAI clock source */
+ uint32_t saiclocksource = 0U;
+ if ((PeriphClk == RCC_PERIPHCLK_SAI1) || (PeriphClk == RCC_PERIPHCLK_SAI2))
+ {
+ saiclocksource = RCC->DCKCFGR;
+ saiclocksource &= (RCC_DCKCFGR_SAI1SRC | RCC_DCKCFGR_SAI2SRC);
+ switch (saiclocksource)
+ {
+ case 0U: /* PLLSAI is the clock source for SAI*/
+ {
+ /* Configure the PLLSAI division factor */
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLSAIM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM)));
+ }
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ tmpreg1 = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U;
+ frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U))/(tmpreg1);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ tmpreg1 = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U);
+ frequency = frequency/(tmpreg1);
+ break;
+ }
+ case RCC_DCKCFGR_SAI1SRC_0: /* PLLI2S is the clock source for SAI*/
+ case RCC_DCKCFGR_SAI2SRC_0: /* PLLI2S is the clock source for SAI*/
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ tmpreg1 = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U;
+ frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg1);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ tmpreg1 = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U);
+ frequency = frequency/(tmpreg1);
+ break;
+ }
+ case RCC_DCKCFGR_SAI1SRC_1: /* PLLR is the clock source for SAI*/
+ case RCC_DCKCFGR_SAI2SRC_1: /* PLLR is the clock source for SAI*/
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLL_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+
+ /* PLL_VCO Output = PLL_VCO Input * PLLN */
+ /* SAI_CLK_x = PLL_VCO Output/PLLR */
+ tmpreg1 = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U;
+ frequency = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U))/(tmpreg1);
+ break;
+ }
+ case RCC_DCKCFGR_SAI1SRC: /* External clock is the clock source for SAI*/
+ {
+ frequency = EXTERNAL_CLOCK_VALUE;
+ break;
+ }
+ case RCC_DCKCFGR_SAI2SRC: /* PLLSRC(HSE or HSI) is the clock source for SAI*/
+ {
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ frequency = (uint32_t)(HSI_VALUE);
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ frequency = (uint32_t)(HSE_VALUE);
+ }
+ break;
+ }
+ default :
+ {
+ break;
+ }
+ }
+ }
+ return frequency;
+}
+
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, LTDC, RTC and TIM).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+ uint32_t pllsaip = 0U;
+ uint32_t pllsaiq = 0U;
+ uint32_t pllsair = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*--------------------------- CLK48 Configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the CLK48 clock source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------ SDIO Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection));
+
+ /* Configure the SDIO clock source */
+ __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/
+ /*------------------- Common configuration SAI/I2S -------------------------*/
+ /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division
+ factor is common parameters for both peripherals */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*---------------------- I2S configuration -------------------------------*/
+ /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added
+ only for I2S configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*---------------------------- SAI configuration -------------------------*/
+ /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must
+ be added only for SAI configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S))
+ {
+ /* Check the PLLI2S division factors */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1);
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected -----------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Configure the PLLI2S multiplication and division factors */
+ __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/
+ /*----------------------- Common configuration SAI/LTDC --------------------*/
+ /* In Case of SAI, LTDC or CLK48 Clock Configuration through PLLSAI, PLLSAIN division
+ factor is common parameters for these peripherals */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) &&
+ (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)))
+ {
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*---------------------------- SAI configuration -------------------------*/
+ /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must
+ be added only for SAI configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI))
+ {
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1U) << 1U);
+ /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, pllsair);
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*---------------------------- LTDC configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
+ {
+ assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
+ assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1U) << 1U);
+ /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, pllsaiq, PeriphClkInit->PLLSAI.PLLSAIR);
+ /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
+ }
+
+ /*---------------------------- CLK48 configuration ------------------------*/
+ /* Configure the PLLSAI when it is used as clock source for CLK48 */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == (RCC_PERIPHCLK_CLK48)) &&
+ (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP))
+ {
+ assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+
+ /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* CLK48_CLK(first level) = PLLSAI_VCO Output/PLLSAIP */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, pllsair);
+ }
+
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- RTC configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI |\
+ RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO;
+
+ /* Get the PLLI2S Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ /* Get the PLLSAI Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+ PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+ PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR);
+ /* Get the RTC Clock configuration -----------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the CLK48 clock configuration -------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDIO clock configuration ----------------------------------------*/
+ PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE();
+
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, LTDC RTC and TIM).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+ uint32_t plli2sq = 0U;
+ uint32_t plli2sused = 0U;
+
+ /* Check the peripheral clock selection parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*----------------------------------- I2S APB1 configuration ---------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------------------- I2S APB2 configuration ---------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------ RTC configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------ TIM configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ /* Configure Timer Prescaler */
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------- FMPI2C1 Configuration --------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection));
+
+ /* Configure the FMPI2C1 clock source */
+ __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------- CLK48 Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the SDIO clock source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for CLK48 */
+ if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)
+ {
+ plli2sused = 1U;
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*------------------------------------- SDIO Configuration -----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection));
+
+ /* Configure the SDIO clock source */
+ __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*-------------------------------------- PLLI2S Configuration --------------*/
+ /* PLLI2S is configured when a peripheral will use it as source clock : I2S on APB1 or
+ I2S on APB2*/
+ if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* check for common PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SCLKSOURCE(PeriphClkInit->PLLI2SSelection));
+ assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+ /*-------------------- Set the PLL I2S clock -----------------------------*/
+ __HAL_RCC_PLL_I2S_CONFIG(PeriphClkInit->PLLI2SSelection);
+
+ /*------- In Case of PLLI2S is selected as source clock for I2S ----------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) && (PeriphClkInit->SdioClockSelection == RCC_SDIOCLKSOURCE_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Read PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+ plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sq, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected ------------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/
+ /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*-------------------- DFSDM1 clock source configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection));
+
+ /* Configure the DFSDM1 interface clock source */
+ __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*-------------------- DFSDM1 Audio clock source configuration -------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection));
+
+ /* Configure the DFSDM1 Audio interface clock source */
+ __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\
+ RCC_PERIPHCLK_SDIO;
+
+ /* Get the PLLI2S Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SM));
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+
+ /* Get the I2S APB1 clock configuration ------------------------------------*/
+ PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE();
+
+ /* Get the I2S APB2 clock configuration ------------------------------------*/
+ PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE();
+
+ /* Get the RTC Clock configuration -----------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the FMPI2C1 clock configuration -------------------------------------*/
+ PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE();
+
+ /* Get the CLK48 clock configuration ----------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDIO clock configuration ----------------------------------------*/
+ PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE();
+
+ /* Get the TIM Prescaler configuration -------------------------------------*/
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the
+ * RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks).
+ *
+ * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case
+ * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup
+ * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*---------------------------- RTC configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- FMPI2C1 Configuration -----------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection));
+
+ /* Configure the FMPI2C1 clock source */
+ __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- LPTIM1 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection));
+
+ /* Configure the LPTIM1 clock source */
+ __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection);
+ }
+
+ /*---------------------------- I2S Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SAPBCLKSOURCE(PeriphClkInit->I2SClockSelection));
+
+ /* Configure the I2S clock source */
+ __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2SClockSelection);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC;
+
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+ /* Get the FMPI2C1 clock configuration -------------------------------------*/
+ PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE();
+
+ /* Get the I2S clock configuration -----------------------------------------*/
+ PeriphClkInit->I2SClockSelection = __HAL_RCC_GET_I2S_SOURCE();
+
+
+}
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, LTDC RTC and TIM).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/
+ /*----------------------- Common configuration SAI/I2S ----------------------*/
+ /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division
+ factor is common parameters for both peripherals */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*---------------------------- I2S configuration -------------------------------*/
+ /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added
+ only for I2S configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*---------------------------- SAI configuration -------------------------------*/
+ /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must
+ be added only for SAI configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S))
+ {
+ /* Check the PLLI2S division factors */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1);
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/
+ /*----------------------- Common configuration SAI/LTDC --------------------*/
+ /* In Case of SAI or LTDC Clock Configuration through PLLSAI, PLLSAIN division
+ factor is common parameters for both peripherals */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) ||
+ (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC))
+ {
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*---------------------------- SAI configuration -------------------------*/
+ /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must
+ be added only for SAI configuration */
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI))
+ {
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1);
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*---------------------------- LTDC configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
+ {
+ assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
+ assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
+
+ /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, PeriphClkInit->PLLSAI.PLLSAIR);
+ /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
+ }
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- RTC configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+ /*--------------------------------------------------------------------------*/
+
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the PeriphClkInit according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI | RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC;
+
+ /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+ /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+ PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+ /* Get the PLLSAI/PLLI2S division factors -----------------------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+ PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR);
+ /* Get the RTC Clock configuration -----------------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the
+ * RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks).
+ *
+ * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case
+ * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup
+ * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg1 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*---------------------------- I2S configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+#if defined(STM32F411xE)
+ assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+#endif /* STM32F411xE */
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+#if defined(STM32F411xE)
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SR);
+#else
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+#endif /* STM32F411xE */
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+ /* Get tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /*---------------------------- RTC configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg1;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ /*---------------------------- TIM configuration ---------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_RTC;
+
+ /* Get the PLLI2S Clock configuration --------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+#if defined(STM32F411xE)
+ PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM);
+#endif /* STM32F411xE */
+ /* Get the RTC Clock configuration -----------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ /* Get the TIM Prescaler configuration -------------------------------------*/
+ if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+ * supported by this API. User should request a transition to LSE Off
+ * first and then LSE On or LSE Bypass.
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this API. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @note This function add the PLL/PLLR factor management during PLL configuration this feature
+ * is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+ /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
+#if defined(STM32F446xx)
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+#else
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+#endif /* STM32F446xx */
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+ /* Check the HSE State */
+ if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is bypassed or disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+#if defined(STM32F446xx)
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+#else
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+#endif /* STM32F446xx */
+ {
+ /* When HSI is used as system clock it will not disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+ assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+ assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+ assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+ assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR));
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the main PLL clock source, multiplication and division factors. */
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PLLM,
+ RCC_OscInitStruct->PLL.PLLN,
+ RCC_OscInitStruct->PLL.PLLP,
+ RCC_OscInitStruct->PLL.PLLQ,
+ RCC_OscInitStruct->PLL.PLLR);
+
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that will be configured.
+ *
+ * @note This function is only available in case of STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ * @note This function add the PLL/PLLR factor management
+ * @retval None
+ */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+ /* Get the HSE configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+ }
+ else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+ }
+
+ /* Get the HSI configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+
+ /* Get the LSE configuration -----------------------------------------------*/
+ if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+ }
+ else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+ }
+
+ /* Get the LSI configuration -----------------------------------------------*/
+ if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+ }
+
+ /* Get the PLL configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+ }
+ RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+ RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+ RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
+ RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
+ RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
+ RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+}
+#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Select LSE mode
+ *
+ * @note This mode is only available for STM32F410xx/STM32F411xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ *
+ * @param Mode: specifies the LSE mode.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_LOWPOWER_MODE: LSE oscillator in low power mode selection
+ * @arg RCC_LSE_HIGHDRIVE_MODE: LSE oscillator in High Drive mode selection
+ * @retval None
+ */
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE_MODE(Mode));
+ if(Mode == RCC_LSE_HIGHDRIVE_MODE)
+ {
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
+ }
+ else
+ {
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
+ }
+}
+
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F446xx)
+/**
+ * @brief Returns the SYSCLK frequency
+ *
+ * @note This function implementation is valid only for STM32F446xx devices.
+ * @note This function add the PLL/PLLR System clock source
+ *
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+ * @note If SYSCLK source is PLL or PLLR, function returns values based on HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baudrate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ *
+ * @retval SYSCLK frequency
+ */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ uint32_t pllm = 0U;
+ uint32_t pllvco = 0U;
+ uint32_t pllp = 0U;
+ uint32_t pllr = 0U;
+ uint32_t sysclockfreq = 0U;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
+ {
+ sysclockfreq = HSE_VALUE;
+ break;
+ }
+ case RCC_CFGR_SWS_PLL: /* PLL/PLLP used as system clock source */
+ {
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLP */
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+ if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1U) *2U);
+
+ sysclockfreq = pllvco/pllp;
+ break;
+ }
+ case RCC_CFGR_SWS_PLLR: /* PLL/PLLR used as system clock source */
+ {
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLR */
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+ if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+ }
+ pllr = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+
+ sysclockfreq = pllvco/pllr;
+ break;
+ }
+ default:
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ }
+ return sysclockfreq;
+}
+#endif /* STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rcc_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,6616 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_EX_H
+#define __STM32F4xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
+
+ uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432
+ except for STM32F411xE devices where the Min_Data = 192 */
+
+ uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK).
+ This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
+
+ uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks.
+ This parameter must be a number between Min_Data = 4 and Max_Data = 15 */
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+ uint32_t PLLR; /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
+ This parameter is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx
+ and STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7 */
+#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+}RCC_PLLInitTypeDef;
+
+#if defined(STM32F446xx)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
+
+ uint32_t PLLI2SP; /*!< Specifies division factor for SPDIFRX Clock.
+ This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIM; /*!< Spcifies division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
+
+ uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS, SDIO and RNG clocks.
+ This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+}RCC_PLLSAIInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
+
+ uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
+
+ uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */
+
+ uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< Specifies CEC Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
+
+ uint32_t SpdifClockSelection; /*!< Specifies SPDIFRX Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */
+
+ uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
+ This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F446xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t I2SClockSelection; /*!< Specifies RTC Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2S_APB_Clock_Source */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */
+
+ uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S */
+
+ uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */
+
+ uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
+
+ uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
+
+ uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
+ This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
+
+ uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 Clock Selection.
+ This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */
+
+ uint32_t Dfsdm1AudioClockSelection;/*!< Specifies DFSDM1 Audio Clock Selection.
+ This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */
+
+ uint32_t PLLI2SSelection; /*!< Specifies PLL I2S Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_PLL_I2S_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS and SDIO clocks.
+ This parameter is only available in STM32F469xx/STM32F479xx devices.
+ This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */
+#endif /* STM32F469xx || STM32F479xx */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
+
+}RCC_PLLSAIInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
+ This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+ uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
+ This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
+
+ uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
+#endif /* STM32F469xx || STM32F479xx */
+}RCC_PeriphCLKInitTypeDef;
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+#if defined(STM32F411xE)
+ uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 62 */
+#endif /* STM32F411xE */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432
+ Except for STM32F411xE devices where the Min_Data = 192.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
+ * @{
+ */
+/* Peripheral Clock source for STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx */
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define RCC_PERIPHCLK_I2S_APB1 ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_I2S_APB2 ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000040U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000080U)
+#define RCC_PERIPHCLK_DFSDM1 ((uint32_t)0x00000100U)
+#define RCC_PERIPHCLK_DFSDM1_AUDIO ((uint32_t)0x00000200U)
+#endif /* STM32F412Zx || STM32F412Vx) || STM32F412Rx || STM32F412Cx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------- Peripheral Clock source for STM32F410xx ----------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_LPTIM1 ((uint32_t)0x00000010U)
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------- Peripheral Clock source for STM32F446xx ----------------*/
+#if defined(STM32F446xx)
+#define RCC_PERIPHCLK_I2S_APB1 ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_I2S_APB2 ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_SAI1 ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_SAI2 ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000040U)
+#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000080U)
+#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00000100U)
+#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000200U)
+#define RCC_PERIPHCLK_SPDIFRX ((uint32_t)0x00000400U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000800U)
+#endif /* STM32F446xx */
+/*-----------------------------------------------------------------------------*/
+
+/*----------- Peripheral Clock source for STM32F469xx/STM32F479xx -------------*/
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000040U)
+#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00000080U)
+#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000100U)
+#endif /* STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*-------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004U)
+#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008U)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000040U)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/*----------------------------------------------------------------------------*/
+
+/*-------- Peripheral Clock source for STM32F40xxx/STM32F41xxx ---------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000002U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000004U)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000008U)
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+/*----------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup RCCEx_I2S_Clock_Source I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SCLKSOURCE_EXT ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+
+/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000U)
+#define RCC_PLLSAIDIVR_4 ((uint32_t)0x00010000U)
+#define RCC_PLLSAIDIVR_8 ((uint32_t)0x00020000U)
+#define RCC_PLLSAIDIVR_16 ((uint32_t)0x00030000U)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define RCC_PLLI2SP_DIV2 ((uint32_t)0x00000002U)
+#define RCC_PLLI2SP_DIV4 ((uint32_t)0x00000004U)
+#define RCC_PLLI2SP_DIV6 ((uint32_t)0x00000006U)
+#define RCC_PLLI2SP_DIV8 ((uint32_t)0x00000008U)
+#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define RCC_PLLSAIP_DIV2 ((uint32_t)0x00000002U)
+#define RCC_PLLSAIP_DIV4 ((uint32_t)0x00000004U)
+#define RCC_PLLSAIP_DIV6 ((uint32_t)0x00000006U)
+#define RCC_PLLSAIP_DIV8 ((uint32_t)0x00000008U)
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source
+ * @{
+ */
+#define RCC_SAIACLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAIACLKSOURCE_PLLI2S ((uint32_t)0x00100000U)
+#define RCC_SAIACLKSOURCE_EXT ((uint32_t)0x00200000U)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source
+ * @{
+ */
+#define RCC_SAIBCLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAIBCLKSOURCE_PLLI2S ((uint32_t)0x00400000U)
+#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)0x00800000U)
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source
+ * @{
+ */
+#define RCC_CLK48CLKSOURCE_PLLQ ((uint32_t)0x00000000U)
+#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR_CK48MSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
+ * @{
+ */
+#define RCC_SDIOCLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_SDIOSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source
+ * @{
+ */
+#define RCC_DSICLKSOURCE_DSIPHY ((uint32_t)0x00000000U)
+#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_DSISEL)
+/**
+ * @}
+ */
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F446xx)
+/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source
+ * @{
+ */
+#define RCC_SAI1CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAI1CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0)
+#define RCC_SAI1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1SRC_1)
+#define RCC_SAI1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI2_Clock_Source RCC SAI2 Clock Source
+ * @{
+ */
+#define RCC_SAI2CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAI2CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI2SRC_0)
+#define RCC_SAI2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI2SRC_1)
+#define RCC_SAI2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI2SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB1CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0)
+#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1)
+#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB2CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0)
+#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1)
+#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
+ * @{
+ */
+#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000U)
+#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
+#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI ((uint32_t)0x00000000U)
+#define RCC_CECCLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_CECSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source
+ * @{
+ */
+#define RCC_CLK48CLKSOURCE_PLLQ ((uint32_t)0x00000000U)
+#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR2_CK48MSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
+ * @{
+ */
+#define RCC_SDIOCLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SPDIFRX_Clock_Source RCC SPDIFRX Clock Source
+ * @{
+ */
+#define RCC_SPDIFRXCLKSOURCE_PLLR ((uint32_t)0x00000000U)
+#define RCC_SPDIFRXCLKSOURCE_PLLI2SP ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL)
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup RCCEx_PLL_I2S_Clock_Source PLL I2S Clock Source
+ * @{
+ */
+#define RCC_PLLI2SCLKSOURCE_PLLSRC ((uint32_t)0x00000000U)
+#define RCC_PLLI2SCLKSOURCE_EXT ((uint32_t)RCC_PLLI2SCFGR_PLLI2SSRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source RCC DFSDM1 Audio Clock Source
+ * @{
+ */
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 ((uint32_t)0x00000000U)
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 ((uint32_t)RCC_DCKCFGR_CKDFSDM1ASEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCC DFSDM1 Kernel Clock Source
+ * @{
+ */
+#define RCC_DFSDM1CLKSOURCE_APB2 ((uint32_t)0x00000000U)
+#define RCC_DFSDM1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB1CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0)
+#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1)
+#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB2CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0)
+#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1)
+#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
+ * @{
+ */
+#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000U)
+#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
+#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source
+ * @{
+ */
+#define RCC_CLK48CLKSOURCE_PLLQ ((uint32_t)0x00000000U)
+#define RCC_CLK48CLKSOURCE_PLLI2SQ ((uint32_t)RCC_DCKCFGR2_CK48MSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
+ * @{
+ */
+#define RCC_SDIOCLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL)
+/**
+ * @}
+ */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @defgroup RCCEx_I2S_APB_Clock_Source RCC I2S APB Clock Source
+ * @{
+ */
+#define RCC_I2SAPBCLKSOURCE_PLLR ((uint32_t)0x00000000U)
+#define RCC_I2SAPBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2SSRC_0)
+#define RCC_I2SAPBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2SSRC_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
+ * @{
+ */
+#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000U)
+#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
+#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source
+ * @{
+ */
+#define RCC_LPTIM1CLKSOURCE_PCLK ((uint32_t)0x00000000U)
+#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0)
+#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1)
+#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1)
+/**
+ * @}
+ */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection
+ * @{
+ */
+#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00U)
+#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01U)
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
+ STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection
+ * @{
+ */
+#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00U)
+#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01U)
+/**
+ * @}
+ */
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||\
+ STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx)
+/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source
+ * @{
+ */
+#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000U)
+#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source
+ * @{
+ */
+#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000U)
+#define RCC_MCO2SOURCE_I2SCLK RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
+/**
+ * @}
+ */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+/*------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx --------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
+#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
+#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
+#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETH_CLK_ENABLE() do { \
+ __HAL_RCC_ETHMAC_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETH_CLK_DISABLE() do { \
+ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMAC_CLK_DISABLE(); \
+ } while(0)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+ #define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_HASH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
+
+#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
+#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
+#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
+
+#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET)
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
+#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
+#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET)
+#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET)
+#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_LTDC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_DSI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))!= RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))== RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
+
+#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET)
+#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET)
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET)
+#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET)
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
+#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
+#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
+#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
+#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST))
+#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
+#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
+
+#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN))
+#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN))
+#endif /* STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------------- STM32F40xxx/STM32F41xxx-----------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETH_CLK_ENABLE() do { \
+ __HAL_RCC_ETHMAC_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_ETH_CLK_DISABLE() do { \
+ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMAC_CLK_DISABLE(); \
+ } while(0)
+#endif /* STM32F407xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN))== RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
+#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
+#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
+#endif /* STM32F407xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_HASH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
+
+#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
+#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET)
+#endif /* STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET)
+#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+ /**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F415xx || STM32F417xx */
+
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+
+#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
+#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
+#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------- STM32F401xE/STM32F401xC --------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() (RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() (RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+/**
+ * @}
+ */
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U)
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U)
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U)
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+/**
+ * @}
+ */
+#endif /* STM32F401xC || STM32F401xE*/
+/*----------------------------------------------------------------------------*/
+
+/*-------------------------------- STM32F410xx -------------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_RNGEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB1) peripheral clock.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN))
+#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN))
+#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET)
+#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET)
+#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @{
+ */
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET)
+
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_RNGRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_RNGRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET()
+#define __HAL_RCC_AHB2_RELEASE_RESET()
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET()
+#define __HAL_RCC_AHB3_RELEASE_RESET()
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_RNGLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_RNGLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN))
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN))
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @{
+ */
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN))
+/**
+ * @}
+ */
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/*----------------------------------------------------------------------------*/
+
+/*-------------------------------- STM32F411xx -------------------------------*/
+#if defined(STM32F411xE)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEX_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @{
+ */
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @{
+ */
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+/**
+ * @}
+ */
+#endif /* STM32F411xE */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F446xx -----------------------------*/
+#if defined(STM32F446xx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN))!= RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
+
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+
+#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SAI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
+#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
+#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN))
+/**
+ * @}
+ */
+
+#endif /* STM32F446xx */
+/*----------------------------------------------------------------------------*/
+
+/*----------STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx----------*/
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
+ * @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F412Zx) || defined(STM32F412Vx)
+#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+#endif /* STM32F412Zx || STM32F412Vx */
+#if defined(STM32F412Rx)
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+#endif /* STM32F412Rx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F412Zx) || defined(STM32F412Vx)
+#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+
+#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+#endif /* STM32F412Zx || STM32F412Vx */
+#if defined(STM32F412Rx)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+#endif /* STM32F412Rx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET)
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN))!= RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET)
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+/**
+ * @}
+ */
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN))
+#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET)
+#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET)
+
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET)
+#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#if defined(STM32F412Zx) || defined(STM32F412Vx)
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+
+#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+#endif /* STM32F412Zx || STM32F412Vx */
+#if defined(STM32F412Cx)
+#define __HAL_RCC_AHB3_FORCE_RESET()
+#define __HAL_RCC_AHB3_RELEASE_RESET()
+
+#define __HAL_RCC_FSMC_FORCE_RESET()
+#define __HAL_RCC_QSPI_FORCE_RESET()
+
+#define __HAL_RCC_FSMC_RELEASE_RESET()
+#define __HAL_RCC_QSPI_RELEASE_RESET()
+#endif /* STM32F412Cx */
+#if defined(STM32F412Rx)
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+
+#define __HAL_RCC_FSMC_FORCE_RESET()
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_FSMC_RELEASE_RESET()
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+#endif /* STM32F412Rx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#if defined(STM32F412Zx) || defined(STM32F412Vx)
+#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+
+#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+#endif /* STM32F412Zx || STM32F412Vx */
+
+#if defined(STM32F412Rx)
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+#endif /* STM32F412Rx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN))
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN))
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN))
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN))
+/**
+ * @}
+ */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------------- PLL Configuration --------------------------*/
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 100 and 432 MHz.
+ *
+ * @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ *
+ * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ *
+ * @param __PLLR__: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note This parameter is only available in STM32F446xx/STM32F469xx/STM32F479xx/
+ STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \
+ (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \
+ ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
+ ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ)) | \
+ ((__PLLR__) << POSITION_VAL(RCC_PLLCFGR_PLLR))))
+#else
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432
+ * Except for STM32F411xE devices where Min_Data = 192.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 100 and 432 MHz, Except for STM32F411xE devices
+ * where frequency is between 192 and 432 MHz.
+ * @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ *
+ * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \
+ (RCC->PLLCFGR = (0x20000000U | (__RCC_PLLSource__) | (__PLLM__)| \
+ ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
+ ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))))
+ #endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------PLLI2S Configuration ---------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+
+/** @brief Macros to enable or disable the PLLI2S.
+ * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE)
+#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE)
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#if defined(STM32F446xx)
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 1 MHz to limit PLLI2S jitter.
+ *
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLI2SP__: specifies division factor for SPDIFRX Clock.
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note the PLLI2SP parameter is only available with STM32F446xx Devices
+ *
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ *
+ * @param __PLLI2SQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
+ ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((((__PLLI2SP__) >> 1) -1) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) |\
+ ((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 1 MHz to limit PLLI2S jitter.
+ *
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ *
+ * @param __PLLI2SQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
+ ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#else
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ *
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = (((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#endif /* STM32F446xx */
+
+#if defined(STM32F411xE)
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note The PLLI2SM parameter is only used with STM32F411xE/STM32F410xx Devices
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLLI2S jitter.
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
+ ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#endif /* STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API)
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLI2SQ__: specifies the division factor for SAI1 clock.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx/469xx/479xx
+ * Devices and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) |\
+ ((__PLLI2SQ__) << 24) |\
+ ((__PLLI2SR__) << 28))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------------ PLLSAI Configuration ------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macros to Enable or Disable the PLLISAI.
+ * @note The PLLSAI is only available with STM32F429x/439x Devices.
+ * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE)
+#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE)
+
+#if defined(STM32F446xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ *
+ * @param __PLLSAIM__: specifies the division factor for PLLSAI VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLSAIM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 1 MHz to limit PLLI2S jitter.
+ * @note The PLLSAIM parameter is only used with STM32F446xx Devices
+ *
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLSAIP__: specifies division factor for OTG FS, SDIO and RNG clocks.
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note the PLLSAIP parameter is only available with STM32F446xx Devices
+ *
+ * @param __PLLSAIQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ *
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = ((__PLLSAIM__) | \
+ ((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \
+ ((((__PLLSAIP__) >> 1) -1) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) | \
+ ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ))))
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ *
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLSAIP__: specifies division factor for SDIO and CLK48 clocks.
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ *
+ * @param __PLLSAIQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ *
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = (((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) |\
+ ((((__PLLSAIP__) >> 1) -1) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) |\
+ ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)) |\
+ ((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR))))
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ *
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ *
+ * @param __PLLSAIQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ *
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = (((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \
+ ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)) | \
+ ((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR))))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------- PLLSAI/PLLI2S Dividers Configuration -------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
+ defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
+ * @note This function must be called before enabling the PLLI2S.
+ * @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock.
+ * This parameter must be a number between 1 and 32.
+ * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
+ */
+#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 32.
+ * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
+ *
+ * @note The LTDC peripheral is only available with STM32F427/437/429/439/469/479xx Devices.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 16.
+ * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__)))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+/*----------------------------------------------------------------------------*/
+
+/*------------------------- Peripheral Clock selection -----------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\
+ defined(STM32F479xx)
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __SOURCE__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source.
+ */
+#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__))
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @brief Macro to configure SAI1BlockA clock source selection.
+ * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block A clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block A clock.
+ */
+#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__)))
+
+/** @brief Macro to configure SAI1BlockB clock source selection.
+ * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block B clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block B clock.
+ */
+#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__)))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F446xx)
+/** @brief Macro to configure SAI1 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ */
+#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__)))
+
+/** @brief Macro to Get SAI1 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ */
+#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC))
+
+/** @brief Macro to configure SAI2 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
+ */
+#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__)))
+
+/** @brief Macro to Get SAI2 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
+ */
+#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC))
+
+/** @brief Macro to configure I2S APB1 clock source selection.
+ * @note This function must be called before enabling PLL, PLLI2S and the I2S clock.
+ * @param __SOURCE__: specifies the I2S APB1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB1 clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC))
+
+/** @brief Macro to configure I2S APB2 clock source selection.
+ * @note This function must be called before enabling PLL, PLLI2S and the I2S clock.
+ * @param __SOURCE__: specifies the SAI Block A clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB2 clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC))
+
+/** @brief Macro to configure the CEC clock.
+ * @param __SOURCE__: specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CEC clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL))
+
+/** @brief Macro to configure the FMPI2C1 clock.
+ * @param __SOURCE__: specifies the FMPI2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the FMPI2C1 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
+
+/** @brief Macro to configure the CLK48 clock.
+ * @param __SOURCE__: specifies the CLK48 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
+ */
+#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CLK48 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
+ */
+#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL))
+
+/** @brief Macro to configure the SDIO clock.
+ * @param __SOURCE__: specifies the SDIO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SDIO clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL))
+
+/** @brief Macro to configure the SPDIFRX clock.
+ * @param __SOURCE__: specifies the SPDIFRX clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
+ */
+#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SPDIFRX clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
+ */
+#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL))
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @brief Macro to configure the CLK48 clock.
+ * @param __SOURCE__: specifies the CLK48 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
+ */
+#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CLK48 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
+ */
+#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL))
+
+/** @brief Macro to configure the SDIO clock.
+ * @param __SOURCE__: specifies the SDIO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SDIO clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL))
+
+/** @brief Macro to configure the DSI clock.
+ * @param __SOURCE__: specifies the DSI clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
+ * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
+ */
+#define __HAL_RCC_DSI_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the DSI clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
+ * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
+ */
+#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL))
+
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+ /** @brief Macro to configure the DFSDM1 clock.
+ * @param __DFSDM1_CLKSOURCE__: specifies the DFSDM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DFSDM1CLKSOURCE_APB2: APB2 clock used as kernel clock.
+ * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock.
+ * @retval None
+ */
+#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM1_CLKSOURCE__))
+
+/** @brief Macro to get the DFSDM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DFSDM1CLKSOURCE_APB2: APB2 clock used as kernel clock.
+ * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock.
+ */
+#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL)))
+
+/** @brief Macro to configure DFSDM1 Audio clock source selection.
+ * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx Devices.
+ * @param __SOURCE__: specifies the DFSDM1 Audio clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1: CK_I2S_APB1 selected as audio clock
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2: CK_I2S_APB2 selected as audio clock
+ */
+#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL, (__SOURCE__)))
+
+/** @brief Macro to Get DFSDM1 Audio clock source selection.
+ * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1: CK_I2S_APB1 selected as audio clock
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2: CK_I2S_APB2 selected as audio clock
+ */
+#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL))
+
+/** @brief Macro to configure I2S APB1 clock source selection.
+ * @param __SOURCE__: specifies the I2S APB1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB1 clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC))
+
+/** @brief Macro to configure I2S APB2 clock source selection.
+ * @param __SOURCE__: specifies the I2S APB2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB2 clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC))
+
+/** @brief Macro to configure the PLL I2S clock source (PLLI2SCLK).
+ * @note This macro must be called before enabling the I2S APB clock.
+ * @param __SOURCE__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLI2SCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ * @arg RCC_PLLI2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source.
+ */
+#define __HAL_RCC_PLL_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_PLLI2SCFGR_PLLI2SSRC_BB = (__SOURCE__))
+
+/** @brief Macro to configure the FMPI2C1 clock.
+ * @param __SOURCE__: specifies the FMPI2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the FMPI2C1 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
+
+/** @brief Macro to configure the CLK48 clock.
+ * @param __SOURCE__: specifies the CLK48 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock.
+ */
+#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CLK48 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
+ * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock
+ */
+#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL))
+
+/** @brief Macro to configure the SDIO clock.
+ * @param __SOURCE__: specifies the SDIO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SDIO clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL))
+
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @brief Macro to configure I2S clock source selection.
+ * @param __SOURCE__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR.
+ * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC.
+ */
+#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR.
+ * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
+ * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC.
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC))
+
+/** @brief Macro to configure the FMPI2C1 clock.
+ * @param __SOURCE__: specifies the FMPI2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the FMPI2C1 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
+ */
+#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
+
+/** @brief Macro to configure the LPTIM1 clock.
+ * @param __SOURCE__: specifies the LPTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_LPTIM1CLKSOURCE_PCLK: APB selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+ */
+#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the LPTIM1 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_LPTIM1CLKSOURCE_PCLK: APB selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+ */
+#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
+ defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/** @brief Macro to configure the Timers clocks prescalers
+ * @note This feature is only available with STM32F429x/439x Devices.
+ * @param __PRESC__ : specifies the Timers clocks prescalers selection
+ * This parameter can be one of the following values:
+ * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1 or 2,
+ * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
+ * division by 4 or more.
+ * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
+ * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
+ * to division by 8 or more.
+ */
+#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||\
+ STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/*----------------------------------------------------------------------------*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Enable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Disable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Clear the PLLSAI RDY interrupt pending bits.
+ */
+#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
+
+/** @brief Check the PLLSAI RDY interrupt has occurred or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Check PLLSAI RDY flag is set or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @brief Macros to enable or disable the RCC MCO1 feature.
+ */
+#define __HAL_RCC_MCO1_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = ENABLE)
+#define __HAL_RCC_MCO1_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the RCC MCO2 feature.
+ */
+#define __HAL_RCC_MCO2_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = ENABLE)
+#define __HAL_RCC_MCO2_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = DISABLE)
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+
+#if defined(STM32F446xx)
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+#endif /* STM32F446xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode);
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Constants RCCEx Private Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+/* --- CR Register ---*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* Alias word address of PLLSAION bit */
+#define RCC_PLLSAION_BIT_NUMBER 0x1C
+#define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLSAION_BIT_NUMBER * 4))
+
+#define PLLSAI_TIMEOUT_VALUE ((uint32_t)2) /* Timeout value fixed to 2 ms */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Alias word address of PLLI2SON bit */
+#define RCC_PLLI2SON_BIT_NUMBER 0x1A
+#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLI2SON_BIT_NUMBER * 4))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+
+/* --- DCKCFGR Register ---*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
+ defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+/* Alias word address of TIMPRE bit */
+#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8C)
+#define RCC_TIMPRE_BIT_NUMBER 0x18
+#define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (RCC_TIMPRE_BIT_NUMBER * 4))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F410xx || STM32F401xC ||\
+ STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/* --- CFGR Register ---*/
+#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08U)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx)
+/* Alias word address of I2SSRC bit */
+#define RCC_I2SSRC_BIT_NUMBER 0x17
+#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_I2SSRC_BIT_NUMBER * 4))
+
+#define PLLI2S_TIMEOUT_VALUE ((uint32_t)2) /* Timeout value fixed to 2 ms */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/* --- PLLI2SCFGR Register ---*/
+#define RCC_PLLI2SCFGR_OFFSET (RCC_OFFSET + 0x84U)
+/* Alias word address of PLLI2SSRC bit */
+#define RCC_PLLI2SSRC_BIT_NUMBER 0x16
+#define RCC_PLLI2SCFGR_PLLI2SSRC_BB (PERIPH_BB_BASE + (RCC_PLLI2SCFGR_OFFSET * 32) + (RCC_PLLI2SSRC_BIT_NUMBER * 4))
+
+#define PLLI2S_TIMEOUT_VALUE ((uint32_t)2) /* Timeout value fixed to 2 ms */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/* Alias word address of MCO1EN bit */
+#define RCC_MCO1EN_BIT_NUMBER 0x8
+#define RCC_CFGR_MCO1EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_MCO1EN_BIT_NUMBER * 4))
+
+/* Alias word address of MCO2EN bit */
+#define RCC_MCO2EN_BIT_NUMBER 0x9
+#define RCC_CFGR_MCO2EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_MCO2EN_BIT_NUMBER * 4))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#define PLL_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+#if defined(STM32F411xE)
+#define IS_RCC_PLLN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U))
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U))
+#else /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||
+ STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410Tx || STM32F410Cx ||
+ STM32F410Rx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Cx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Zx */
+#define IS_RCC_PLLN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
+#endif /* STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000007FU))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000007U))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000000FU))
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000001FU))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F446xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000FFFU))
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x000001FFU))
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x000003FFU))
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U))
+
+#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
+
+#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U))
+
+#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U))
+
+#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U))
+
+#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_4) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_8) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_16))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63U)
+
+#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+ ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+#endif /* STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+ ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+
+#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
+
+#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK) ||\
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE))
+
+#define IS_RCC_I2SAPBCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPBCLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLSRC))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#if defined(STM32F446xx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV4) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV6) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV8))
+
+#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63U)
+
+#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV4) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV6) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV8))
+
+#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_SAI1CLKSOURCE_EXT))
+
+#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC))
+
+ #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) ||\
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+
+#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\
+ ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP))
+
+#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\
+ ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
+
+#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE) (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
+#endif /* STM32F446xx */
+
+#if defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV4) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV6) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV8))
+
+#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\
+ ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP))
+
+#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\
+ ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
+
+#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_DSICLKSOURCE_DSIPHY))
+
+#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+ ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+#endif /* STM32F469xx || STM32F479xx */
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
+
+#define IS_RCC_PLLI2SCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLI2SCLKSOURCE_PLLSRC) || \
+ ((__SOURCE__) == RCC_PLLI2SCLKSOURCE_EXT))
+
+#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC))
+
+ #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
+
+#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\
+ ((SOURCE) == RCC_CLK48CLKSOURCE_PLLI2SQ))
+
+#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\
+ ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
+
+#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_APB2) || \
+ ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK))
+
+#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1) || \
+ ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2))
+
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx)
+
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
+ ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || \
+ STM32F412Rx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_I2SCLK)|| \
+ ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,529 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rng.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief RNG HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Random Number Generator (RNG) peripheral:
+ * + Initialization/de-initialization functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The RNG HAL driver can be used as follows:
+
+ (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro
+ in HAL_RNG_MspInit().
+ (#) Activate the RNG peripheral using HAL_RNG_Init() function.
+ (#) Wait until the 32 bit Random Number Generator contains a valid
+ random data using (polling/interrupt) mode.
+ (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RNG
+ * @{
+ */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+
+
+/* Private types -------------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup RNG_Private_Constants
+ * @{
+ */
+#define RNG_TIMEOUT_VALUE 2U
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions prototypes ----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup RNG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RNG_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the RNG according to the specified parameters
+ in the RNG_InitTypeDef and create the associated handle
+ (+) DeInitialize the RNG peripheral
+ (+) Initialize the RNG MSP
+ (+) DeInitialize RNG MSP
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RNG peripheral and creates the associated handle.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng)
+{
+ /* Check the RNG handle allocation */
+ if(hrng == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ __HAL_LOCK(hrng);
+
+ if(hrng->State == HAL_RNG_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hrng->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_RNG_MspInit(hrng);
+ }
+
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_BUSY;
+
+ /* Enable the RNG Peripheral */
+ __HAL_RNG_ENABLE(hrng);
+
+ /* Initialize the RNG state */
+ hrng->State = HAL_RNG_STATE_READY;
+
+ __HAL_UNLOCK(hrng);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the RNG peripheral.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng)
+{
+ /* Check the RNG handle allocation */
+ if(hrng == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Disable the RNG Peripheral */
+ CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN);
+
+ /* Clear RNG interrupt status flags */
+ CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS);
+
+ /* DeInit the low level hardware */
+ HAL_RNG_MspDeInit(hrng);
+
+ /* Update the RNG state */
+ hrng->State = HAL_RNG_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hrng);
+
+ /* Return the function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the RNG MSP.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval None
+ */
+__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrng);
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_RNG_MspInit must be implemented in the user file.
+ */
+}
+
+/**
+ * @brief DeInitializes the RNG MSP.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval None
+ */
+__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrng);
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_RNG_MspDeInit must be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup RNG_Exported_Functions_Group2
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Get the 32 bit Random number
+ (+) Get the 32 bit Random number with interrupt enabled
+ (+) Handle RNG interrupt request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Generates a 32-bit random number.
+ * @note Each time the random number data is read the RNG_FLAG_DRDY flag
+ * is automatically cleared.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @param random32bit: pointer to generated random number variable if successful.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit)
+{
+ uint32_t tickstart = 0U;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(hrng);
+
+ /* Check RNG peripheral state */
+ if(hrng->State == HAL_RNG_STATE_READY)
+ {
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_BUSY;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check if data register contains valid random data */
+ while(__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
+ {
+ hrng->State = HAL_RNG_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get a 32bit Random number */
+ hrng->RandomNumber = hrng->Instance->DR;
+ *random32bit = hrng->RandomNumber;
+
+ hrng->State = HAL_RNG_STATE_READY;
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+
+ return status;
+}
+
+/**
+ * @brief Generates a 32-bit random number in interrupt mode.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(hrng);
+
+ /* Check RNG peripheral state */
+ if(hrng->State == HAL_RNG_STATE_READY)
+ {
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_BUSY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+
+ /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */
+ __HAL_RNG_ENABLE_IT(hrng);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+
+ status = HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Handles RNG interrupt request.
+ * @note In the case of a clock error, the RNG is no more able to generate
+ * random numbers because the PLL48CLK clock is not correct. User has
+ * to check that the clock controller is correctly configured to provide
+ * the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT().
+ * The clock error has no impact on the previously generated
+ * random numbers, and the RNG_DR register contents can be used.
+ * @note In the case of a seed error, the generation of random numbers is
+ * interrupted as long as the SECS bit is '1'. If a number is
+ * available in the RNG_DR register, it must not be used because it may
+ * not have enough entropy. In this case, it is recommended to clear the
+ * SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable
+ * the RNG peripheral to reinitialize and restart the RNG.
+ * @note User-written HAL_RNG_ErrorCallback() API is called once whether SEIS
+ * or CEIS are set.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval None
+
+ */
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng)
+{
+ /* RNG clock error interrupt occurred */
+ if((__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) || (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET))
+ {
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_ERROR;
+
+ HAL_RNG_ErrorCallback(hrng);
+
+ /* Clear the clock error flag */
+ __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI|RNG_IT_SEI);
+
+ }
+
+ /* Check RNG data ready interrupt occurred */
+ if(__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET)
+ {
+ /* Generate random number once, so disable the IT */
+ __HAL_RNG_DISABLE_IT(hrng);
+
+ /* Get the 32bit Random number (DRDY flag automatically cleared) */
+ hrng->RandomNumber = hrng->Instance->DR;
+
+ if(hrng->State != HAL_RNG_STATE_ERROR)
+ {
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_READY;
+
+ /* Data Ready callback */
+ HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber);
+ }
+ }
+}
+
+/**
+ * @brief Returns generated random number in polling mode (Obsolete)
+ * Use HAL_RNG_GenerateRandomNumber() API instead.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval Random value
+ */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng)
+{
+ if(HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
+ {
+ return hrng->RandomNumber;
+ }
+ else
+ {
+ return 0U;
+ }
+}
+
+/**
+ * @brief Returns a 32-bit random number with interrupt enabled (Obsolete),
+ * Use HAL_RNG_GenerateRandomNumber_IT() API instead.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval 32-bit random number
+ */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+ uint32_t random32bit = 0U;
+
+ /* Process locked */
+ __HAL_LOCK(hrng);
+
+ /* Change RNG peripheral state */
+ hrng->State = HAL_RNG_STATE_BUSY;
+
+ /* Get a 32bit Random number */
+ random32bit = hrng->Instance->DR;
+
+ /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */
+ __HAL_RNG_ENABLE_IT(hrng);
+
+ /* Return the 32 bit random number */
+ return random32bit;
+}
+
+/**
+ * @brief Read latest generated random number.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval random value
+ */
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng)
+{
+ return(hrng->RandomNumber);
+}
+
+/**
+ * @brief Data Ready callback in non-blocking mode.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @param random32bit: generated random number.
+ * @retval None
+ */
+__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrng);
+ UNUSED(random32bit);
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_RNG_ReadyDataCallback must be implemented in the user file.
+ */
+}
+
+/**
+ * @brief RNG error callbacks.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval None
+ */
+__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrng);
+ /* NOTE : This function should not be modified. When the callback is needed,
+ function HAL_RNG_ErrorCallback must be implemented in the user file.
+ */
+}
+/**
+ * @}
+ */
+
+
+/** @addtogroup RNG_Exported_Functions_Group3
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the RNG state.
+ * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
+ * the configuration information for RNG.
+ * @retval HAL state
+ */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng)
+{
+ return hrng->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F410xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rng.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,369 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rng.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RNG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RNG_H
+#define __STM32F4xx_HAL_RNG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+ defined(STM32F412Cx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RNG RNG
+ * @brief RNG HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Types RNG Exported Types
+ * @{
+ */
+
+/** @defgroup RNG_Exported_Types_Group1 RNG State Structure definition
+ * @{
+ */
+typedef enum
+{
+ HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */
+ HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */
+ HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */
+ HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */
+ HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */
+
+}HAL_RNG_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Types_Group2 RNG Handle Structure definition
+ * @{
+ */
+typedef struct
+{
+ RNG_TypeDef *Instance; /*!< Register base address */
+
+ HAL_LockTypeDef Lock; /*!< RNG locking object */
+
+ __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */
+
+ uint32_t RandomNumber; /*!< Last Generated RNG Data */
+
+}RNG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Constants RNG Exported Constants
+ * @{
+ */
+
+/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition
+ * @{
+ */
+#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */
+#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */
+#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition
+ * @{
+ */
+#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */
+#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */
+#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Macros RNG Exported Macros
+ * @{
+ */
+
+/** @brief Reset RNG handle state
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
+
+/**
+ * @brief Enables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN)
+
+/**
+ * @brief Disables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN)
+
+/**
+ * @brief Check the selected RNG flag status.
+ * @param __HANDLE__: RNG Handle
+ * @param __FLAG__: RNG flag
+ * This parameter can be one of the following values:
+ * @arg RNG_FLAG_DRDY: Data ready
+ * @arg RNG_FLAG_CECS: Clock error current status
+ * @arg RNG_FLAG_SECS: Seed error current status
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the selected RNG flag status.
+ * @param __HANDLE__: RNG handle
+ * @param __FLAG__: RNG flag to clear
+ * @note WARNING: This is a dummy macro for HAL code alignment,
+ * flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only.
+ * @retval None
+ */
+#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */
+
+
+
+/**
+ * @brief Enables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE)
+
+/**
+ * @brief Disables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE)
+
+/**
+ * @brief Checks whether the specified RNG interrupt has occurred or not.
+ * @param __HANDLE__: RNG Handle
+ * @param __INTERRUPT__: specifies the RNG interrupt status flag to check.
+ * This parameter can be one of the following values:
+ * @arg RNG_IT_DRDY: Data ready interrupt
+ * @arg RNG_IT_CEI: Clock error interrupt
+ * @arg RNG_IT_SEI: Seed error interrupt
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clear the RNG interrupt status flags.
+ * @param __HANDLE__: RNG Handle
+ * @param __INTERRUPT__: specifies the RNG interrupt status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg RNG_IT_CEI: Clock error interrupt
+ * @arg RNG_IT_SEI: Seed error interrupt
+ * @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY.
+ * @retval None
+ */
+#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RNG_Exported_Functions RNG Exported Functions
+ * @{
+ */
+
+/** @defgroup RNG_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
+HAL_StatusTypeDef HAL_RNG_DeInit (RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
+
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit);
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng);
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng);
+
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef* hrng, uint32_t random32bit);
+
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup RNG_Private_Types RNG Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup RNG_Private_Defines RNG Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Variables RNG Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Constants RNG Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RNG_Private_Macros RNG Private Macros
+ * @{
+ */
+#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \
+ ((IT) == RNG_IT_SEI))
+
+#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
+ ((FLAG) == RNG_FLAG_CECS) || \
+ ((FLAG) == RNG_FLAG_SECS))
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup RNG_Private_Functions_Prototypes RNG Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Functions RNG Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F410xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_RNG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1547 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief RTC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Real Time Clock (RTC) peripheral:
+ * + Initialization and de-initialization functions
+ * + RTC Time and Date functions
+ * + RTC Alarm functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Backup Domain Operating Condition #####
+ ==============================================================================
+ [..] The real-time clock (RTC), the RTC backup registers, and the backup
+ SRAM (BKP SRAM) can be powered from the VBAT voltage when the main
+ VDD supply is powered off.
+ To retain the content of the RTC backup registers, backup SRAM, and supply
+ the RTC when VDD is turned off, VBAT pin can be connected to an optional
+ standby voltage supplied by a battery or by another source.
+
+ [..] To allow the RTC operating even when the main digital supply (VDD) is turned
+ off, the VBAT pin powers the following blocks:
+ (#) The RTC
+ (#) The LSE oscillator
+ (#) The backup SRAM when the low power backup regulator is enabled
+ (#) PC13 to PC15 I/Os, plus PI8 I/O (when available)
+
+ [..] When the backup domain is supplied by VDD (analog switch connected to VDD),
+ the following pins are available:
+ (#) PC14 and PC15 can be used as either GPIO or LSE pins
+ (#) PC13 can be used as a GPIO or as the RTC_AF1 pin
+ (#) PI8 can be used as a GPIO or as the RTC_AF2 pin
+
+ [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT
+ because VDD is not present), the following pins are available:
+ (#) PC14 and PC15 can be used as LSE pins only
+ (#) PC13 can be used as the RTC_AF1 pin
+ (#) PI8 can be used as the RTC_AF2 pin
+
+ ##### Backup Domain Reset #####
+ ==================================================================
+ [..] The backup domain reset sets all RTC registers and the RCC_BDCR register
+ to their reset values. The BKPSRAM is not affected by this reset. The only
+ way to reset the BKPSRAM is through the Flash interface by requesting
+ a protection level change from 1 to 0.
+ [..] A backup domain reset is generated when one of the following events occurs:
+ (#) Software reset, triggered by setting the BDRST bit in the
+ RCC Backup domain control register (RCC_BDCR).
+ (#) VDD or VBAT power on, if both supplies have previously been powered off.
+
+ ##### Backup Domain Access #####
+ ==================================================================
+ [..] After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted write
+ accesses.
+ [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Enable the Power Controller (PWR) APB1 interface clock using the
+ __HAL_RCC_PWR_CLK_ENABLE() function.
+ (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+ (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function.
+ (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function.
+
+
+ ##### How to use this driver #####
+ ==================================================================
+ [..]
+ (+) Enable the RTC domain access (see description in the section above).
+ (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+ format using the HAL_RTC_Init() function.
+
+ *** Time and Date configuration ***
+ ===================================
+ [..]
+ (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime()
+ and HAL_RTC_SetDate() functions.
+ (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions.
+
+ *** Alarm configuration ***
+ ===========================
+ [..]
+ (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function.
+ You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function.
+ (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
+
+ ##### RTC and low power modes #####
+ ==================================================================
+ [..] The MCU can be woken up from a low power mode by an RTC alternate
+ function.
+ [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B),
+ RTC wake-up, RTC tamper event detection and RTC time stamp event detection.
+ These RTC alternate functions can wake up the system from the Stop and
+ Standby low power modes.
+ [..] The system can also wake up from low power modes without depending
+ on an external interrupt (Auto-wake-up mode), by using the RTC alarm
+ or the RTC wake-up events.
+ [..] The RTC provides a programmable time base for waking up from the
+ Stop or Standby mode at regular intervals.
+ Wake-up from STOP and STANDBY modes is possible only when the RTC clock source
+ is LSE or LSI.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RTC RTC
+ * @brief RTC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Functions RTC Exported Functions
+ * @{
+ */
+
+/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to initialize and configure the
+ RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable
+ RTC registers Write protection, enter and exit the RTC initialization mode,
+ RTC registers synchronization check and reference clock detection enable.
+ (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base.
+ It is split into 2 programmable prescalers to minimize power consumption.
+ (++) A 7-bit asynchronous prescaler and a 13-bit synchronous prescaler.
+ (++) When both prescalers are used, it is recommended to configure the
+ asynchronous prescaler to a high value to minimize power consumption.
+ (#) All RTC registers are Write protected. Writing to the RTC registers
+ is enabled by writing a key into the Write Protection register, RTC_WPR.
+ (#) To configure the RTC Calendar, user application should enter
+ initialization mode. In this mode, the calendar counter is stopped
+ and its value can be updated. When the initialization sequence is
+ complete, the calendar restarts counting after 4 RTCCLK cycles.
+ (#) To read the calendar through the shadow registers after Calendar
+ initialization, calendar update or after wake-up from low power modes
+ the software must first clear the RSF flag. The software must then
+ wait until it is set again before reading the calendar, which means
+ that the calendar registers have been correctly copied into the
+ RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function
+ implements the above software sequence (RSF clear and RSF check).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RTC peripheral
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
+{
+ /* Check the RTC peripheral state */
+ if(hrtc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat));
+ assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
+ assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv));
+ assert_param (IS_RTC_OUTPUT(hrtc->Init.OutPut));
+ assert_param (IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity));
+ assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType));
+
+ if(hrtc->State == HAL_RTC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hrtc->Lock = HAL_UNLOCKED;
+ /* Initialize RTC MSP */
+ HAL_RTC_MspInit(hrtc);
+ }
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Clear RTC_CR FMT, OSEL and POL Bits */
+ hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL));
+ /* Set RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity);
+
+ /* Configure the RTC PRER */
+ hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv);
+ hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << 16U);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+ hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_ALARMOUTTYPE;
+ hrtc->Instance->TAFCR |= (uint32_t)(hrtc->Init.OutPutType);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief DeInitializes the RTC peripheral
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note This function doesn't reset the RTC Backup Data registers.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Reset TR, DR and CR registers */
+ hrtc->Instance->TR = (uint32_t)0x00000000U;
+ hrtc->Instance->DR = (uint32_t)0x00002101U;
+ /* Reset All CR bits except CR[2:0] */
+ hrtc->Instance->CR &= (uint32_t)0x00000007U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till WUTWF flag is set and if Time out is reached exit */
+ while(((hrtc->Instance->ISR) & RTC_ISR_WUTWF) == (uint32_t)RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset all RTC CR register bits */
+ hrtc->Instance->CR &= (uint32_t)0x00000000U;
+ hrtc->Instance->WUTR = (uint32_t)0x0000FFFFU;
+ hrtc->Instance->PRER = (uint32_t)0x007F00FFU;
+ hrtc->Instance->CALIBR = (uint32_t)0x00000000U;
+ hrtc->Instance->ALRMAR = (uint32_t)0x00000000U;
+ hrtc->Instance->ALRMBR = (uint32_t)0x00000000U;
+ hrtc->Instance->SHIFTR = (uint32_t)0x00000000U;
+ hrtc->Instance->CALR = (uint32_t)0x00000000U;
+ hrtc->Instance->ALRMASSR = (uint32_t)0x00000000U;
+ hrtc->Instance->ALRMBSSR = (uint32_t)0x00000000U;
+
+ /* Reset ISR register and exit initialization mode */
+ hrtc->Instance->ISR = (uint32_t)0x00000000U;
+
+ /* Reset Tamper and alternate functions configuration register */
+ hrtc->Instance->TAFCR = 0x00000000U;
+
+ /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* De-Initialize RTC MSP */
+ HAL_RTC_MspDeInit(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the RTC MSP.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the RTC MSP.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
+ * @brief RTC Time and Date functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Time and Date functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Time and Date features
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets RTC current time.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTime: Pointer to Time structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving));
+ assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ assert_param(IS_RTC_HOUR12(sTime->Hours));
+ assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+ }
+ else
+ {
+ sTime->TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(sTime->Hours));
+ }
+ assert_param(IS_RTC_MINUTES(sTime->Minutes));
+ assert_param(IS_RTC_SECONDS(sTime->Seconds));
+
+ tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << 8U) | \
+ ((uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \
+ (((uint32_t)sTime->TimeFormat) << 16U));
+ }
+ else
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ tmpreg = RTC_Bcd2ToByte(sTime->Hours);
+ assert_param(IS_RTC_HOUR12(tmpreg));
+ assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+ }
+ else
+ {
+ sTime->TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
+ }
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
+ tmpreg = (((uint32_t)(sTime->Hours) << 16U) | \
+ ((uint32_t)(sTime->Minutes) << 8U) | \
+ ((uint32_t)sTime->Seconds) | \
+ ((uint32_t)(sTime->TimeFormat) << 16U));
+ }
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Set the RTC_TR register */
+ hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
+
+ /* Clear the bits to be configured */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_BCK;
+
+ /* Configure the RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+ /* If CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Gets RTC current time.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTime: Pointer to Time structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @note You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds
+ * value in second fraction ratio with time unit following generic formula:
+ * Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit
+ * This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS
+ * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
+ * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+ * Reading RTC current time locks the values in calendar shadow registers until current date is read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get subseconds structure field from the corresponding register */
+ sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR);
+
+ /* Get SecondFraction structure field from the corresponding register field*/
+ sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S);
+
+ /* Get the TR register */
+ tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK);
+
+ /* Fill the structure fields with the read parameters */
+ sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16U);
+ sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8U);
+ sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU));
+ sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16U);
+
+ /* Check the input parameters format */
+ if(Format == RTC_FORMAT_BIN)
+ {
+ /* Convert the time structure parameters to Binary format */
+ sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours);
+ sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes);
+ sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets RTC current date.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sDate: Pointer to date structure
+ * @param Format: specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+ uint32_t datetmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U))
+ {
+ sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU);
+ }
+
+ assert_param(IS_RTC_WEEKDAY(sDate->WeekDay));
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ assert_param(IS_RTC_YEAR(sDate->Year));
+ assert_param(IS_RTC_MONTH(sDate->Month));
+ assert_param(IS_RTC_DATE(sDate->Date));
+
+ datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sDate->Month) << 8U) | \
+ ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \
+ ((uint32_t)sDate->WeekDay << 13U));
+ }
+ else
+ {
+ assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
+ datetmpreg = RTC_Bcd2ToByte(sDate->Month);
+ assert_param(IS_RTC_MONTH(datetmpreg));
+ datetmpreg = RTC_Bcd2ToByte(sDate->Date);
+ assert_param(IS_RTC_DATE(datetmpreg));
+
+ datetmpreg = ((((uint32_t)sDate->Year) << 16U) | \
+ (((uint32_t)sDate->Month) << 8U) | \
+ ((uint32_t)sDate->Date) | \
+ (((uint32_t)sDate->WeekDay) << 13U));
+ }
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Set the RTC_DR register */
+ hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+ /* If CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY ;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Gets RTC current date.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sDate: Pointer to Date structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
+ * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+ * Reading RTC current time locks the values in calendar shadow registers until Current date is read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+ uint32_t datetmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get the DR register */
+ datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK);
+
+ /* Fill the structure fields with the read parameters */
+ sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16U);
+ sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8U);
+ sDate->Date = (uint8_t)(datetmpreg & (RTC_DR_DT | RTC_DR_DU));
+ sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> 13U);
+
+ /* Check the input parameters format */
+ if(Format == RTC_FORMAT_BIN)
+ {
+ /* Convert the date structure parameters to Binary format */
+ sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year);
+ sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month);
+ sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
+ * @brief RTC Alarm functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Alarm functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Alarm feature
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Sets the specified RTC Alarm.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Alarm structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+ uint32_t tickstart = 0U;
+ uint32_t tmpreg = 0U, subsecondtmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+ assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+ }
+ assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+ assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+ }
+ else
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+ }
+
+ tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24U) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+ else
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+ assert_param(IS_RTC_HOUR12(tmpreg));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+ }
+
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
+ }
+ else
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
+ }
+
+ tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16U) | \
+ ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8U) | \
+ ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
+ ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24U) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+
+ /* Configure the Alarm A or Alarm B Sub Second registers */
+ subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Alarm register */
+ if(sAlarm->Alarm == RTC_ALARM_A)
+ {
+ /* Disable the Alarm A interrupt */
+ __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+ /* Configure the Alarm A Sub Second register */
+ hrtc->Instance->ALRMASSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMA_ENABLE(hrtc);
+ }
+ else
+ {
+ /* Disable the Alarm B interrupt */
+ __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+ /* Configure the Alarm B Sub Second register */
+ hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMB_ENABLE(hrtc);
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets the specified RTC Alarm with Interrupt
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Alarm structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+ uint32_t tmpreg = 0U, subsecondtmpreg = 0U;
+ __IO uint32_t count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U) ;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+ assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+ assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+ }
+ assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+ assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+ }
+ else
+ {
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+ }
+ tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
+ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24U) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+ else
+ {
+ if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+ assert_param(IS_RTC_HOUR12(tmpreg));
+ assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+ }
+ else
+ {
+ sAlarm->AlarmTime.TimeFormat = 0x00U;
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+ }
+
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+ if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
+ }
+ else
+ {
+ tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
+ }
+ tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16U) | \
+ ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8U) | \
+ ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16U) | \
+ ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24U) | \
+ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+ ((uint32_t)sAlarm->AlarmMask));
+ }
+ /* Configure the Alarm A or Alarm B Sub Second registers */
+ subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Alarm register */
+ if(sAlarm->Alarm == RTC_ALARM_A)
+ {
+ /* Disable the Alarm A interrupt */
+ __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+ /* Clear flag alarm A */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+ /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET);
+
+ hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+ /* Configure the Alarm A Sub Second register */
+ hrtc->Instance->ALRMASSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMA_ENABLE(hrtc);
+ /* Configure the Alarm interrupt */
+ __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA);
+ }
+ else
+ {
+ /* Disable the Alarm B interrupt */
+ __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+ /* Clear flag alarm B */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+ /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET);
+
+ hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+ /* Configure the Alarm B Sub Second register */
+ hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+ /* Configure the Alarm state: Enable Alarm */
+ __HAL_RTC_ALARMB_ENABLE(hrtc);
+ /* Configure the Alarm interrupt */
+ __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB);
+ }
+
+ /* RTC Alarm Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_ALARM_EXTI_ENABLE_IT();
+
+ EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivate the specified RTC Alarm
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Alarm: Specifies the Alarm.
+ * This parameter can be one of the following values:
+ * @arg RTC_ALARM_A: AlarmA
+ * @arg RTC_ALARM_B: AlarmB
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_ALARM(Alarm));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ if(Alarm == RTC_ALARM_A)
+ {
+ /* AlarmA */
+ __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* AlarmB */
+ __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc,RTC_IT_ALRB);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the RTC Alarm value and masks.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Date structure
+ * @param Alarm: Specifies the Alarm.
+ * This parameter can be one of the following values:
+ * @arg RTC_ALARM_A: AlarmA
+ * @arg RTC_ALARM_B: AlarmB
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
+{
+ uint32_t tmpreg = 0U, subsecondtmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_ALARM(Alarm));
+
+ if(Alarm == RTC_ALARM_A)
+ {
+ /* AlarmA */
+ sAlarm->Alarm = RTC_ALARM_A;
+
+ tmpreg = (uint32_t)(hrtc->Instance->ALRMAR);
+ subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR ) & RTC_ALRMASSR_SS);
+ }
+ else
+ {
+ sAlarm->Alarm = RTC_ALARM_B;
+
+ tmpreg = (uint32_t)(hrtc->Instance->ALRMBR);
+ subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS);
+ }
+
+ /* Fill the structure with the read parameters */
+ sAlarm->AlarmTime.Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> 16U);
+ sAlarm->AlarmTime.Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> 8U);
+ sAlarm->AlarmTime.Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU));
+ sAlarm->AlarmTime.TimeFormat = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16U);
+ sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg;
+ sAlarm->AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24U);
+ sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL);
+ sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL);
+
+ if(Format == RTC_FORMAT_BIN)
+ {
+ sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+ sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes);
+ sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds);
+ sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Alarm interrupt request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc)
+{
+ if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRA))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRA) != (uint32_t)RESET)
+ {
+ /* AlarmA callback */
+ HAL_RTC_AlarmAEventCallback(hrtc);
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRAF);
+ }
+ }
+
+ if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRB))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRB) != (uint32_t)RESET)
+ {
+ /* AlarmB callback */
+ HAL_RTCEx_AlarmBEventCallback(hrtc);
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRBF);
+ }
+ }
+
+ /* Clear the EXTI's line Flag for RTC Alarm */
+ __HAL_RTC_ALARM_EXTI_CLEAR_FLAG();
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief Alarm A callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_AlarmAEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles AlarmA Polling request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Wait for RTC Time and Date Synchronization
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are
+ * synchronized with RTC APB clock.
+ * @note The RTC Resynchronization mode is write protected, use the
+ * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+ * @note To read the calendar through the shadow registers after Calendar
+ * initialization, calendar update or after wake-up from low power modes
+ * the software must first clear the RSF flag.
+ * The software must then wait until it is set again before reading
+ * the calendar, which means that the calendar registers have been
+ * correctly copied into the RTC_TR and RTC_DR shadow registers.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Clear RSF flag */
+ hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait the registers to be synchronised */
+ while((hrtc->Instance->ISR & RTC_ISR_RSF) == (uint32_t)RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Get RTC state
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Returns the RTC state.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL state
+ */
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc)
+{
+ return hrtc->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Enters the RTC Initialization mode.
+ * @note The RTC Initialization mode is write protected, use the
+ * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check if the Initialization mode is set */
+ if((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+ {
+ /* Set the Initialization mode */
+ hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC is in INIT state and if Time out is reached exit */
+ while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Converts a 2 digit decimal to BCD format.
+ * @param Value: Byte to be converted
+ * @retval Converted byte
+ */
+uint8_t RTC_ByteToBcd2(uint8_t Value)
+{
+ uint32_t bcdhigh = 0U;
+
+ while(Value >= 10U)
+ {
+ bcdhigh++;
+ Value -= 10U;
+ }
+
+ return ((uint8_t)(bcdhigh << 4U) | Value);
+}
+
+/**
+ * @brief Converts from 2 digit BCD to Binary.
+ * @param Value: BCD value to be converted
+ * @retval Converted word
+ */
+uint8_t RTC_Bcd2ToByte(uint8_t Value)
+{
+ uint32_t tmp = 0U;
+ tmp = ((uint8_t)(Value & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U;
+ return (tmp + (Value & (uint8_t)0x0FU));
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,833 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_H
+#define __STM32F4xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Types RTC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */
+}HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFFU */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTC_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content.
+ This parameter corresponds to a time unit range between [0-1] Second
+ with [1 Sec / SecondFraction +1] granularity */
+
+ uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content
+ corresponding to Synchronous pre-scaler factor value (PREDIV_S)
+ This parameter corresponds to a time unit range between [0-1] Second
+ with [1 Sec / SecondFraction +1] granularity.
+ This field will be used only by HAL_RTC_GetTime function */
+
+ uint32_t DayLightSaving; /*!< Specifies DayLight Save Operation.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+ * @brief RTC Handle Structure definition
+ */
+typedef struct
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+ * @{
+ */
+
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000U)
+#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000U)
+#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000U)
+#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000U)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000U)
+#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000U)
+#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00U)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000U)
+#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000U)
+#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000U)
+#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions
+ * @{
+ */
+#define RTC_FORMAT_BIN ((uint32_t)0x00000000U)
+#define RTC_FORMAT_BCD ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
+ * @{
+ */
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01U)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02U)
+#define RTC_MONTH_MARCH ((uint8_t)0x03U)
+#define RTC_MONTH_APRIL ((uint8_t)0x04U)
+#define RTC_MONTH_MAY ((uint8_t)0x05U)
+#define RTC_MONTH_JUNE ((uint8_t)0x06U)
+#define RTC_MONTH_JULY ((uint8_t)0x07U)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08U)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09U)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10U)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11U)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01U)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000U)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000U)
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+#define RTC_ALARM_B RTC_CR_ALRBE
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000U) /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000U) /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000U) /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000U) /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000U) /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000U) /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000U) /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000U) /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000U) /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000U) /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000U) /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000U) /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000U) /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000U) /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000U) /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_NONE ((uint32_t)0x0F000000U) /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
+ * @{
+ */
+#define RTC_IT_TS ((uint32_t)0x00008000U)
+#define RTC_IT_WUT ((uint32_t)0x00004000U)
+#define RTC_IT_ALRB ((uint32_t)0x00002000U)
+#define RTC_IT_ALRA ((uint32_t)0x00001000U)
+#define RTC_IT_TAMP ((uint32_t)0x00000004U) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 ((uint32_t)0x00020000U)
+#define RTC_IT_TAMP2 ((uint32_t)0x00040000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF ((uint32_t)0x00010000U)
+#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000U)
+#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000U)
+#define RTC_FLAG_TSOVF ((uint32_t)0x00001000U)
+#define RTC_FLAG_TSF ((uint32_t)0x00000800U)
+#define RTC_FLAG_WUTF ((uint32_t)0x00000400U)
+#define RTC_FLAG_ALRBF ((uint32_t)0x00000200U)
+#define RTC_FLAG_ALRAF ((uint32_t)0x00000100U)
+#define RTC_FLAG_INITF ((uint32_t)0x00000040U)
+#define RTC_FLAG_RSF ((uint32_t)0x00000020U)
+#define RTC_FLAG_INITS ((uint32_t)0x00000010U)
+#define RTC_FLAG_SHPF ((uint32_t)0x00000008U)
+#define RTC_FLAG_WUTWF ((uint32_t)0x00000004U)
+#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002U)
+#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+ * @{
+ */
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCAU; \
+ (__HANDLE__)->Instance->WPR = 0x53U; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFFU; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+ * @brief Disable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @arg RTC_FLAG_ALRAWF
+ * @arg RTC_FLAG_ALRBWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Enable interrupt on the RTC Alarm associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Alarm associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable event on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable event on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); \
+ __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Clear the RTC Alarm associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT)
+/**
+ * @}
+ */
+
+/* Include RTC HAL Extension module */
+#include "stm32f4xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group2
+ * @{
+ */
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group3
+ * @{
+ */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group5
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Constants RTC Private Constants
+ * @{
+ */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7FU)
+#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3FU)
+#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFFU)
+#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5FU)
+#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
+ RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
+ RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
+ RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
+ RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
+
+#define RTC_TIMEOUT_VALUE 1000
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTC_Private_Macros RTC Private Macros
+ * @{
+ */
+
+/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
+ * @{
+ */
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMB) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0U) && ((HOUR) <= (uint32_t)12U))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23U)
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FU)
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFFU)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59U)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59U)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99U)
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1U) && ((MONTH) <= (uint32_t)12U))
+#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1U) && ((DATE) <= (uint32_t)31U))
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0U) && ((DATE) <= (uint32_t)31U))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+#define IS_RTC_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7FU) == (uint32_t)RESET)
+#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFFU)
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_NONE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Functions RTC Private Functions
+ * @{
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1781 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief RTC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Real Time Clock (RTC) Extension peripheral:
+ * + RTC Time Stamp functions
+ * + RTC Tamper functions
+ * + RTC Wake-up functions
+ * + Extension Control functions
+ * + Extension RTC features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) Enable the RTC domain access.
+ (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+ format using the HAL_RTC_Init() function.
+
+ *** RTC Wake-up configuration ***
+ ================================
+ [..]
+ (+) To configure the RTC Wake-up Clock source and Counter use the HAL_RTC_SetWakeUpTimer()
+ function. You can also configure the RTC Wake-up timer in interrupt mode
+ using the HAL_RTC_SetWakeUpTimer_IT() function.
+ (+) To read the RTC Wake-up Counter register, use the HAL_RTC_GetWakeUpTimer()
+ function.
+
+ *** TimeStamp configuration ***
+ ===============================
+ [..]
+ (+) Configure the RTC_AFx trigger and enable the RTC TimeStamp using the
+ HAL_RTC_SetTimeStamp() function. You can also configure the RTC TimeStamp with
+ interrupt mode using the HAL_RTC_SetTimeStamp_IT() function.
+ (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTC_GetTimeStamp()
+ function.
+ (+) The TIMESTAMP alternate function can be mapped either to RTC_AF1 (PC13)
+ or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TSINSEL bit in
+ RTC_TAFCR register. The corresponding pin is also selected by HAL_RTC_SetTimeStamp()
+ or HAL_RTC_SetTimeStamp_IT() function.
+
+ *** Tamper configuration ***
+ ============================
+ [..]
+ (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge
+ or Level according to the Tamper filter (if equal to 0 Edge else Level)
+ value, sampling frequency, precharge or discharge and Pull-UP using the
+ HAL_RTC_SetTamper() function. You can configure RTC Tamper in interrupt
+ mode using HAL_RTC_SetTamper_IT() function.
+ (+) The TAMPER1 alternate function can be mapped either to RTC_AF1 (PC13)
+ or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TAMP1INSEL bit in
+ RTC_TAFCR register. The corresponding pin is also selected by HAL_RTC_SetTamper()
+ or HAL_RTC_SetTamper_IT() function.
+
+ *** Backup Data Registers configuration ***
+ ===========================================
+ [..]
+ (+) To write to the RTC Backup Data registers, use the HAL_RTC_BKUPWrite()
+ function.
+ (+) To read the RTC Backup Data registers, use the HAL_RTC_BKUPRead()
+ function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RTCEx RTCEx
+ * @brief RTC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RTCEx_Exported_Functions_Group1 RTC TimeStamp and Tamper functions
+ * @brief RTC TimeStamp and Tamper functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC TimeStamp and Tamper functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure TimeStamp feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets TimeStamp.
+ * @note This API must be called before enabling the TimeStamp feature.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is
+ * activated.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+ * rising edge of the related pin.
+ * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+ * falling edge of the related pin.
+ * @param RTC_TimeStampPin: specifies the RTC TimeStamp Pin.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
+ * @arg RTC_TIMESTAMPPIN_POS1: PI8/PA0 is selected as RTC TimeStamp Pin.
+ * (PI8 for all STM32 devices except for STM32F446xx devices the PA0 is used)
+ * @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+ assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ tmpreg|= TimeStampEdge;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
+ hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets TimeStamp with Interrupt.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note This API must be called before enabling the TimeStamp feature.
+ * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is
+ * activated.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+ * rising edge of the related pin.
+ * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+ * falling edge of the related pin.
+ * @param RTC_TimeStampPin: Specifies the RTC TimeStamp Pin.
+ * This parameter can be one of the following values:
+ * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
+ * @arg RTC_TIMESTAMPPIN_PI8: PI8 is selected as RTC TimeStamp Pin. (not applicable in the case of STM32F446xx devices)
+ * @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+ assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ tmpreg |= TimeStampEdge;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
+ hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
+
+ /* Clear RTC Timestamp flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+ __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+ /* Enable IT timestamp */
+ __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS);
+
+ /* RTC timestamp Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+
+ EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates TimeStamp.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
+
+ /* Get the RTC_CR register and clear the bits to be configured */
+ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+ /* Configure the Time Stamp TSEDGE and Enable bits */
+ hrtc->Instance->CR = (uint32_t)tmpreg;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the RTC TimeStamp value.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTimeStamp: Pointer to Time structure
+ * @param sTimeStampDate: Pointer to Date structure
+ * @param Format: specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * RTC_FORMAT_BIN: Binary data format
+ * RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format)
+{
+ uint32_t tmptime = 0U, tmpdate = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Get the TimeStamp time and date registers values */
+ tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
+ tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
+
+ /* Fill the Time structure fields with the read parameters */
+ sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16U);
+ sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8U);
+ sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU));
+ sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16U);
+ sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
+
+ /* Fill the Date structure fields with the read parameters */
+ sTimeStampDate->Year = 0U;
+ sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8U);
+ sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU));
+ sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13U);
+
+ /* Check the input parameters format */
+ if(Format == RTC_FORMAT_BIN)
+ {
+ /* Convert the TimeStamp structure parameters to Binary format */
+ sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
+ sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
+ sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
+
+ /* Convert the DateTimeStamp structure parameters to Binary format */
+ sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
+ sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
+ sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
+ }
+
+ /* Clear the TIMESTAMP Flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets Tamper
+ * @note By calling this API we disable the tamper interrupt for all tampers.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTamper: Pointer to Tamper Structure.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+ assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
+ assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+ assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+ assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+ assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+ assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+ assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+ {
+ sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);
+ }
+
+ tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger |\
+ (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
+ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS |\
+ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
+ (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL | (uint32_t)RTC_TAFCR_TAMPIE);
+
+ hrtc->Instance->TAFCR |= tmpreg;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets Tamper with interrupt.
+ * @note By calling this API we force the tamper interrupt for all tampers.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTamper: Pointer to RTC Tamper.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+ assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
+ assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+ assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+ assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+ assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+ assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+ assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Configure the tamper trigger */
+ if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+ {
+ sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);
+ }
+
+ tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger |\
+ (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
+ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+ hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS |\
+ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
+ (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL);
+
+ hrtc->Instance->TAFCR |= tmpreg;
+
+ /* Configure the Tamper Interrupt in the RTC_TAFCR */
+ hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE;
+
+ if(sTamper->Tamper == RTC_TAMPER_1)
+ {
+ /* Clear RTC Tamper 1 flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);
+ }
+ else
+ {
+ /* Clear RTC Tamper 2 flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+ }
+
+ /* RTC Tamper Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+
+ EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates Tamper.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Tamper: Selected tamper pin.
+ * This parameter can be RTC_Tamper_1 and/or RTC_TAMPER_2.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)
+{
+ assert_param(IS_RTC_TAMPER(Tamper));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the selected Tamper pin */
+ hrtc->Instance->TAFCR &= (uint32_t)~Tamper;
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles TimeStamp interrupt request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+ if(__HAL_RTC_TIMESTAMP_GET_IT(hrtc, RTC_IT_TS))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_TS) != (uint32_t)RESET)
+ {
+ /* TIMESTAMP callback */
+ HAL_RTCEx_TimeStampEventCallback(hrtc);
+
+ /* Clear the TIMESTAMP interrupt pending bit */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc,RTC_FLAG_TSF);
+ }
+ }
+
+ /* Get the status of the Interrupt */
+ if(__HAL_RTC_TAMPER_GET_IT(hrtc,RTC_IT_TAMP1))
+ {
+ /* Get the TAMPER Interrupt enable bit and pending bit */
+ if(((hrtc->Instance->TAFCR & (RTC_TAFCR_TAMPIE))) != (uint32_t)RESET)
+ {
+ /* Tamper callback */
+ HAL_RTCEx_Tamper1EventCallback(hrtc);
+
+ /* Clear the Tamper interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+ }
+ }
+
+ /* Get the status of the Interrupt */
+ if(__HAL_RTC_TAMPER_GET_IT(hrtc, RTC_IT_TAMP2))
+ {
+ /* Get the TAMPER Interrupt enable bit and pending bit */
+ if(((hrtc->Instance->TAFCR & RTC_TAFCR_TAMPIE)) != (uint32_t)RESET)
+ {
+ /* Tamper callback */
+ HAL_RTCEx_Tamper2EventCallback(hrtc);
+
+ /* Clear the Tamper interrupt pending bit */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+ }
+ }
+ /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief TimeStamp callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_TimeStampEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tamper 1 callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_Tamper1EventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tamper 2 callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_Tamper2EventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles TimeStamp polling request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET)
+ {
+ if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET)
+ {
+ /* Clear the TIMESTAMP Overrun Flag */
+ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
+
+ /* Change TIMESTAMP state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Tamper1 Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F)== RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Tamper2 Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Get the status of the Interrupt */
+ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Tamper Flag */
+ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP2F);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Exported_Functions_Group2 RTC Wake-up functions
+ * @brief RTC Wake-up functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Wake-up functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Wake-up feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets wake up timer.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param WakeUpCounter: Wake up counter
+ * @param WakeUpClock: Wake up clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+ assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /*Check RTC WUTWF flag is reset only when wake up timer enabled*/
+ if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
+ {
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear the Wake-up Timer clock source bits in CR register */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+ /* Configure the clock source */
+ hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+ /* Configure the Wake-up Timer counter */
+ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+ /* Enable the Wake-up Timer */
+ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets wake up timer with interrupt
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param WakeUpCounter: Wake up counter
+ * @param WakeUpClock: Wake up clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+ __IO uint32_t count;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+ assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Check RTC WUTWF flag is reset only when wake up timer enabled */
+ if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
+ {
+ /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */
+ count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET);
+ }
+
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U);
+ do
+ {
+ if(count-- == 0U)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET);
+
+ /* Configure the Wake-up Timer counter */
+ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+ /* Clear the Wake-up Timer clock source bits in CR register */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+ /* Configure the clock source */
+ hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+ /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
+
+ EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT;
+
+ /* Clear RTC Wake Up timer Flag */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+ /* Configure the Interrupt in the RTC_CR register */
+ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT);
+
+ /* Enable the Wake-up Timer */
+ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates wake up timer counter.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Disable the Wake-up Timer */
+ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets wake up timer counter.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval Counter value
+ */
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+ /* Get the counter value */
+ return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));
+}
+
+/**
+ * @brief This function handles Wake Up Timer interrupt request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+ if(__HAL_RTC_WAKEUPTIMER_GET_IT(hrtc, RTC_IT_WUT))
+ {
+ /* Get the status of the Interrupt */
+ if((uint32_t)(hrtc->Instance->CR & RTC_IT_WUT) != (uint32_t)RESET)
+ {
+ /* WAKEUPTIMER callback */
+ HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
+
+ /* Clear the WAKEUPTIMER interrupt pending bit */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+ }
+ }
+
+ /* Clear the EXTI's line Flag for RTC WakeUpTimer */
+ __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief Wake Up Timer callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_WakeUpTimerEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles Wake Up Timer Polling.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the WAKEUPTIMER Flag */
+ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RTCEx_Exported_Functions_Group3 Extension Peripheral Control functions
+ * @brief Extension Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Write a data in a specified RTC Backup data register
+ (+) Read a data in a specified RTC Backup data register
+ (+) Set the Coarse calibration parameters.
+ (+) Deactivate the Coarse calibration parameters
+ (+) Set the Smooth calibration parameters.
+ (+) Configure the Synchronization Shift Control Settings.
+ (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ (+) Enable the RTC reference clock detection.
+ (+) Disable the RTC reference clock detection.
+ (+) Enable the Bypass Shadow feature.
+ (+) Disable the Bypass Shadow feature.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Writes a data in a specified RTC Backup data register.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param BackupRegister: RTC Backup data Register number.
+ * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
+ * specify the register.
+ * @param Data: Data to be written in the specified RTC Backup data register.
+ * @retval None
+ */
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_BKP(BackupRegister));
+
+ tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+ tmp += (BackupRegister * 4U);
+
+ /* Write the specified register */
+ *(__IO uint32_t *)tmp = (uint32_t)Data;
+}
+
+/**
+ * @brief Reads data from the specified RTC Backup data Register.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param BackupRegister: RTC Backup data Register number.
+ * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
+ * specify the register.
+ * @retval Read value
+ */
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_BKP(BackupRegister));
+
+ tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+ tmp += (BackupRegister * 4U);
+
+ /* Read the specified register */
+ return (*(__IO uint32_t *)tmp);
+}
+
+/**
+ * @brief Sets the Coarse calibration parameters.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param CalibSign: Specifies the sign of the coarse calibration value.
+ * This parameter can be one of the following values :
+ * @arg RTC_CALIBSIGN_POSITIVE: The value sign is positive
+ * @arg RTC_CALIBSIGN_NEGATIVE: The value sign is negative
+ * @param Value: value of coarse calibration expressed in ppm (coded on 5 bits).
+ *
+ * @note This Calibration value should be between 0 and 63 when using negative
+ * sign with a 2-ppm step.
+ *
+ * @note This Calibration value should be between 0 and 126 when using positive
+ * sign with a 4-ppm step.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef* hrtc, uint32_t CalibSign, uint32_t Value)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_CALIB_SIGN(CalibSign));
+ assert_param(IS_RTC_CALIB_VALUE(Value));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Enable the Coarse Calibration */
+ __HAL_RTC_COARSE_CALIB_ENABLE(hrtc);
+
+ /* Set the coarse calibration value */
+ hrtc->Instance->CALIBR = (uint32_t)(CalibSign|Value);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Coarse calibration parameters.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Enable the Coarse Calibration */
+ __HAL_RTC_COARSE_CALIB_DISABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets the Smooth calibration parameters.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param SmoothCalibPeriod: Select the Smooth Calibration Period.
+ * This parameter can be can be one of the following values :
+ * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
+ * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
+ * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
+ * @param SmoothCalibPlusPulses: Select to Set or reset the CALP bit.
+ * This parameter can be one of the following values:
+ * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.
+ * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
+ * @param SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits.
+ * This parameter can be one any value from 0 to 0x000001FF.
+ * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses
+ * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field
+ * SmouthCalibMinusPulsesValue must be equal to 0.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
+ assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
+ assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* check if a calibration is pending*/
+ if((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* check if a calibration is pending*/
+ while((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Configure the Smooth calibration settings */
+ hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmouthCalibMinusPulsesValue);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Synchronization Shift Control Settings.
+ * @note When REFCKON is set, firmware must not write to Shift control register.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param ShiftAdd1S: Select to add or not 1 second to the time calendar.
+ * This parameter can be one of the following values :
+ * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.
+ * @arg RTC_SHIFTADD1S_RESET: No effect.
+ * @param ShiftSubFS: Select the number of Second Fractions to substitute.
+ * This parameter can be one any value from 0 to 0x7FFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
+ assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the shift is completed*/
+ while((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check if the reference clock detection is disabled */
+ if((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET)
+ {
+ /* Configure the Shift settings */
+ hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
+
+ /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+ {
+ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+ else
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param CalibOutput: Select the Calibration output Selection .
+ * This parameter can be one of the following values:
+ * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.
+ * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Clear flags before config */
+ hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
+
+ /* Configure the RTC_CR register */
+ hrtc->Instance->CR |= (uint32_t)CalibOutput;
+
+ __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the RTC reference clock detection.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the RTC reference clock detection.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set Initialization mode */
+ if(RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Set RTC state*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
+
+ /* Exit Initialization mode */
+ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+ }
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the Bypass Shadow feature.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note When the Bypass Shadow is enabled the calendar value are taken
+ * directly from the Calendar counter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Set the BYPSHAD bit */
+ hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables the Bypass Shadow feature.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note When the Bypass Shadow is enabled the calendar value are taken
+ * directly from the Calendar counter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+ /* Reset the BYPSHAD bit */
+ hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD;
+
+ /* Enable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+ /** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) RTC Alarm B callback
+ (+) RTC Poll for Alarm B request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Alarm B callback.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_AlarmBEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles AlarmB Polling request.
+ * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Alarm Flag */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_rtc_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1005 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of RTC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_EX_H
+#define __STM32F4xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t PinSelection; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
+ * @{
+ */
+#define RTC_BKP_DR0 ((uint32_t)0x00000000U)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001U)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002U)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003U)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004U)
+#define RTC_BKP_DR5 ((uint32_t)0x00000005U)
+#define RTC_BKP_DR6 ((uint32_t)0x00000006U)
+#define RTC_BKP_DR7 ((uint32_t)0x00000007U)
+#define RTC_BKP_DR8 ((uint32_t)0x00000008U)
+#define RTC_BKP_DR9 ((uint32_t)0x00000009U)
+#define RTC_BKP_DR10 ((uint32_t)0x0000000AU)
+#define RTC_BKP_DR11 ((uint32_t)0x0000000BU)
+#define RTC_BKP_DR12 ((uint32_t)0x0000000CU)
+#define RTC_BKP_DR13 ((uint32_t)0x0000000DU)
+#define RTC_BKP_DR14 ((uint32_t)0x0000000EU)
+#define RTC_BKP_DR15 ((uint32_t)0x0000000FU)
+#define RTC_BKP_DR16 ((uint32_t)0x00000010U)
+#define RTC_BKP_DR17 ((uint32_t)0x00000011U)
+#define RTC_BKP_DR18 ((uint32_t)0x00000012U)
+#define RTC_BKP_DR19 ((uint32_t)0x00000013U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000U)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection
+ * @{
+ */
+#define RTC_TAMPERPIN_DEFAULT ((uint32_t)0x00000000U)
+#define RTC_TAMPERPIN_POS1 ((uint32_t)0x00010000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000U)
+#define RTC_TIMESTAMPPIN_POS1 ((uint32_t)0x00020000U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000U)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002U)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000U) /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800U) /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000U) /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800U) /*!< Tamper is activated after 8
+ consecutive samples at the active level. */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700U) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000U) /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000U) /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000U) /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000U) /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event is not saved */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000U)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001U)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002U)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003U)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004U)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions
+ * @{
+ */
+#define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000U)
+#define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080U)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000U) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+ period is 8s, else 2exp18 RTCCLK seconds */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000U) /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000U) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000U)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000U)
+/**
+ * @}
+ */
+
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000U)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+ * @{
+ */
+
+/* ---------------------------------WAKEUPTIMER---------------------------------*/
+/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+ * @brief Disable the RTC Wake-up Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Enable interrupt on the RTC Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable event on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable event on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Clear the RTC Wake-up Timer associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @}
+ */
+
+/* ---------------------------------TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Timestamp RTC Timestamp
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp flag to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @}
+ */
+
+/* ---------------------------------TAMPER------------------------------------*/
+/** @defgroup RTCEx_Tamper RTC Tamper
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
+
+/**
+ * @brief Disable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
+
+/**
+ * @brief Enable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
+
+/**
+ * @brief Disable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @arg RTC_IT_TAMP2
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP: Tamper interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+/**
+ * @}
+ */
+
+/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
+ * @{
+ */
+
+/**
+ * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();\
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();\
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();\
+ } while(0)
+
+/**
+ * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+/**
+ * @}
+ */
+
+/* ------------------------------Calibration----------------------------------*/
+/** @defgroup RTCEx_Calibration RTC Calibration
+ * @{
+ */
+
+/**
+ * @brief Enable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
+
+/**
+ * @brief Disable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+ * @{
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group1
+ * @{
+ */
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group2
+ * @{
+ */
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3
+ * @{
+ */
+/* Extension Control functions ************************************************/
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group4
+ * @{
+ */
+/* Extension RTC features functions *******************************************/
+void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+ * @{
+ */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+ * @{
+ */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+ * @{
+ */
+#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
+ ((BKP) == RTC_BKP_DR1) || \
+ ((BKP) == RTC_BKP_DR2) || \
+ ((BKP) == RTC_BKP_DR3) || \
+ ((BKP) == RTC_BKP_DR4) || \
+ ((BKP) == RTC_BKP_DR5) || \
+ ((BKP) == RTC_BKP_DR6) || \
+ ((BKP) == RTC_BKP_DR7) || \
+ ((BKP) == RTC_BKP_DR8) || \
+ ((BKP) == RTC_BKP_DR9) || \
+ ((BKP) == RTC_BKP_DR10) || \
+ ((BKP) == RTC_BKP_DR11) || \
+ ((BKP) == RTC_BKP_DR12) || \
+ ((BKP) == RTC_BKP_DR13) || \
+ ((BKP) == RTC_BKP_DR14) || \
+ ((BKP) == RTC_BKP_DR15) || \
+ ((BKP) == RTC_BKP_DR16) || \
+ ((BKP) == RTC_BKP_DR17) || \
+ ((BKP) == RTC_BKP_DR18) || \
+ ((BKP) == RTC_BKP_DR19))
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
+
+#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \
+ ((PIN) == RTC_TAMPERPIN_POS1))
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \
+ ((PIN) == RTC_TIMESTAMPPIN_POS1))
+
+#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU)
+#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
+ ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
+
+#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20U)
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU)
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU)
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2183 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SAI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Serial Audio Interface (SAI) peripheral:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+
+ [..]
+ The SAI HAL driver can be used as follows:
+
+ (#) Declare a SAI_HandleTypeDef handle structure (eg. SAI_HandleTypeDef hsai).
+ (#) Initialize the SAI low level resources by implementing the HAL_SAI_MspInit() API:
+ (##) Enable the SAI interface clock.
+ (##) SAI pins configuration:
+ (+++) Enable the clock for the SAI GPIOs.
+ (+++) Configure these SAI pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_SAI_Transmit_IT()
+ and HAL_SAI_Receive_IT() APIs):
+ (+++) Configure the SAI interrupt priority.
+ (+++) Enable the NVIC SAI IRQ handle.
+
+ (##) DMA Configuration if you need to use DMA process (HAL_SAI_Transmit_DMA()
+ and HAL_SAI_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the SAI DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+ DMA Tx/Rx Stream.
+
+ (#) The initialization can be done by two ways
+ (##) Expert mode : Initialize the structures Init, FrameInit and SlotInit and call HAL_SAI_Init().
+ (##) Simplified mode : Initialize the high part of Init Structure and call HAL_SAI_InitProtocol().
+
+ [..]
+ (@) The specific SAI interrupts (FIFO request and Overrun underrun interrupt)
+ will be managed using the macros __HAL_SAI_ENABLE_IT() and __HAL_SAI_DISABLE_IT()
+ inside the transmit and receive process.
+
+ [..]
+ (@) SAI Clock Source configuration is managed differently depending on the selected
+ STM32F4 devices :
+ (+@) For STM32F446xx devices, the configuration is managed through RCCEx_PeriphCLKConfig()
+ function in the HAL RCC drivers
+ (+@) For STM32F439xx/STM32F437xx/STM32F429xx/STM32F427xx devices, the configuration
+ is managed within HAL SAI drivers through HAL_SAI_Init() function using
+ ClockSource field of SAI_InitTypeDef structure.
+ [..]
+ (@) Make sure that either:
+ (+@) I2S PLL is configured or
+ (+@) SAI PLL is configured or
+ (+@) External clock source is configured after setting correctly
+ the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file.
+ [..]
+ (@) In master Tx mode: enabling the audio block immediately generates the bit clock
+ for the external slaves even if there is no data in the FIFO, However FS signal
+ generation is conditioned by the presence of data in the FIFO.
+
+ [..]
+ (@) In master Rx mode: enabling the audio block immediately generates the bit clock
+ and FS signal for the external slaves.
+
+ [..]
+ (@) It is mandatory to respect the following conditions in order to avoid bad SAI behavior:
+ (+@) First bit Offset <= (SLOT size - Data size)
+ (+@) Data size <= SLOT size
+ (+@) Number of SLOT x SLOT size = Frame length
+ (+@) The number of slots should be even when SAI_FS_CHANNEL_IDENTIFICATION is selected.
+
+ [..]
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_SAI_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_SAI_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non-blocking mode using HAL_SAI_Transmit_IT()
+ (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_SAI_TxCpltCallback()
+ (+) Receive an amount of data in non-blocking mode using HAL_SAI_Receive_IT()
+ (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_SAI_RxCpltCallback()
+ (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SAI_ErrorCallback()
+
+ *** DMA mode IO operation ***
+ =============================
+ [..]
+ (+) Send an amount of data in non-blocking mode (DMA) using HAL_SAI_Transmit_DMA()
+ (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_SAI_TxCpltCallback()
+ (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SAI_Receive_DMA()
+ (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_SAI_RxCpltCallback()
+ (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SAI_ErrorCallback()
+ (+) Pause the DMA Transfer using HAL_SAI_DMAPause()
+ (+) Resume the DMA Transfer using HAL_SAI_DMAResume()
+ (+) Stop the DMA Transfer using HAL_SAI_DMAStop()
+
+ *** SAI HAL driver additional function list ***
+ ===============================================
+ [..]
+ Below the list the others API available SAI HAL driver :
+
+ (+) HAL_SAI_EnableTxMuteMode(): Enable the mute in tx mode
+ (+) HAL_SAI_DisableTxMuteMode(): Disable the mute in tx mode
+ (+) HAL_SAI_EnableRxMuteMode(): Enable the mute in Rx mode
+ (+) HAL_SAI_DisableRxMuteMode(): Disable the mute in Rx mode
+ (+) HAL_SAI_FlushRxFifo(): Flush the rx fifo.
+ (+) HAL_SAI_Abort(): Abort the current transfer
+
+ *** SAI HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in SAI HAL driver :
+
+ (+) __HAL_SAI_ENABLE(): Enable the SAI peripheral
+ (+) __HAL_SAI_DISABLE(): Disable the SAI peripheral
+ (+) __HAL_SAI_ENABLE_IT(): Enable the specified SAI interrupts
+ (+) __HAL_SAI_DISABLE_IT(): Disable the specified SAI interrupts
+ (+) __HAL_SAI_GET_IT_SOURCE(): Check if the specified SAI interrupt source is
+ enabled or disabled
+ (+) __HAL_SAI_GET_FLAG(): Check whether the specified SAI flag is set or not
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SAI SAI
+ * @brief SAI HAL module driver
+ * @{
+ */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @defgroup SAI_Private_Typedefs SAI Private Typedefs
+ * @{
+ */
+typedef enum {
+ SAI_MODE_DMA,
+ SAI_MODE_IT
+}SAI_ModeTypedef;
+/**
+ * @}
+ */
+
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup SAI_Private_Constants SAI Private Constants
+ * @{
+ */
+#define SAI_FIFO_SIZE 8U
+#define SAI_DEFAULT_TIMEOUT 4U /* 4ms */
+#define SAI_xCR2_MUTECNT_OFFSET POSITION_VAL(SAI_xCR2_MUTECNT)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup SAI_Private_Functions SAI Private Functions
+ * @{
+ */
+static void SAI_FillFifo(SAI_HandleTypeDef *hsai);
+static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode);
+static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+
+static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai);
+
+static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMAError(DMA_HandleTypeDef *hdma);
+static void SAI_DMAAbort(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Functions SAI Exported Functions
+ * @{
+ */
+
+/** @defgroup SAI_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the SAIx peripheral:
+
+ (+) User must implement HAL_SAI_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_SAI_Init() to configure the selected device with
+ the selected configuration:
+ (++) Mode (Master/slave TX/RX)
+ (++) Protocol
+ (++) Data Size
+ (++) MCLK Output
+ (++) Audio frequency
+ (++) FIFO Threshold
+ (++) Frame Config
+ (++) Slot Config
+
+ (+) Call the function HAL_SAI_DeInit() to restore the default configuration
+ of the selected SAI peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the structure FrameInit, SlotInit and the low part of
+ * Init according to the specified parameters and call the function
+ * HAL_SAI_Init to initialize the SAI block.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param protocol: one of the supported protocol @ref SAI_Protocol
+ * @param datasize: one of the supported datasize @ref SAI_Protocol_DataSize
+ * the configuration information for SAI module.
+ * @param nbslot: Number of slot.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
+ assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
+
+ switch(protocol)
+ {
+ case SAI_I2S_STANDARD :
+ case SAI_I2S_MSBJUSTIFIED :
+ case SAI_I2S_LSBJUSTIFIED :
+ status = SAI_InitI2S(hsai, protocol, datasize, nbslot);
+ break;
+ case SAI_PCM_LONG :
+ case SAI_PCM_SHORT :
+ status = SAI_InitPCM(hsai, protocol, datasize, nbslot);
+ break;
+ default :
+ status = HAL_ERROR;
+ break;
+ }
+
+ if(status == HAL_OK)
+ {
+ status = HAL_SAI_Init(hsai);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Initialize the SAI according to the specified parameters.
+ * in the SAI_InitTypeDef structure and initialize the associated handle.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai)
+{
+ uint32_t tmpregisterGCR = 0U;
+
+ /* This variable used to store the SAI_CK_x (value in Hz) */
+ uint32_t freq = 0U;
+
+ /* This variable is used to compute CKSTR bits of SAI CR1 according to
+ ClockStrobing and AudioMode fields */
+ uint32_t ckstr_bits = 0U;
+ uint32_t syncen_bits = 0U;
+
+ /* Check the SAI handle allocation */
+ if(hsai == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* check the instance */
+ assert_param(IS_SAI_ALL_INSTANCE(hsai->Instance));
+
+ /* Check the SAI Block parameters */
+ assert_param(IS_SAI_AUDIO_FREQUENCY(hsai->Init.AudioFrequency));
+ assert_param(IS_SAI_BLOCK_PROTOCOL(hsai->Init.Protocol));
+ assert_param(IS_SAI_BLOCK_MODE(hsai->Init.AudioMode));
+ assert_param(IS_SAI_BLOCK_SYNCEXT(hsai->Init.SynchroExt));
+ assert_param(IS_SAI_BLOCK_DATASIZE(hsai->Init.DataSize));
+ assert_param(IS_SAI_BLOCK_FIRST_BIT(hsai->Init.FirstBit));
+ assert_param(IS_SAI_BLOCK_CLOCK_STROBING(hsai->Init.ClockStrobing));
+ assert_param(IS_SAI_BLOCK_SYNCHRO(hsai->Init.Synchro));
+ assert_param(IS_SAI_BLOCK_OUTPUT_DRIVE(hsai->Init.OutputDrive));
+ assert_param(IS_SAI_BLOCK_NODIVIDER(hsai->Init.NoDivider));
+ assert_param(IS_SAI_BLOCK_FIFO_THRESHOLD(hsai->Init.FIFOThreshold));
+ assert_param(IS_SAI_MONO_STEREO_MODE(hsai->Init.MonoStereoMode));
+ assert_param(IS_SAI_BLOCK_COMPANDING_MODE(hsai->Init.CompandingMode));
+ assert_param(IS_SAI_BLOCK_TRISTATE_MANAGEMENT(hsai->Init.TriState));
+
+ /* Check the SAI Block Frame parameters */
+ assert_param(IS_SAI_BLOCK_FRAME_LENGTH(hsai->FrameInit.FrameLength));
+ assert_param(IS_SAI_BLOCK_ACTIVE_FRAME(hsai->FrameInit.ActiveFrameLength));
+ assert_param(IS_SAI_BLOCK_FS_DEFINITION(hsai->FrameInit.FSDefinition));
+ assert_param(IS_SAI_BLOCK_FS_POLARITY(hsai->FrameInit.FSPolarity));
+ assert_param(IS_SAI_BLOCK_FS_OFFSET(hsai->FrameInit.FSOffset));
+
+ /* Check the SAI Block Slot parameters */
+ assert_param(IS_SAI_BLOCK_FIRSTBIT_OFFSET(hsai->SlotInit.FirstBitOffset));
+ assert_param(IS_SAI_BLOCK_SLOT_SIZE(hsai->SlotInit.SlotSize));
+ assert_param(IS_SAI_BLOCK_SLOT_NUMBER(hsai->SlotInit.SlotNumber));
+ assert_param(IS_SAI_SLOT_ACTIVE(hsai->SlotInit.SlotActive));
+
+ if(hsai->State == HAL_SAI_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hsai->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_SAI_MspInit(hsai);
+ }
+
+ hsai->State = HAL_SAI_STATE_BUSY;
+
+ /* Disable the selected SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* SAI Block Synchro Configuration -----------------------------------------*/
+ SAI_BlockSynchroConfig(hsai);
+
+ /* Configure Master Clock using the following formula :
+ MCLK_x = SAI_CK_x / (MCKDIV[3:0] * 2) with MCLK_x = 256 * FS
+ FS = SAI_CK_x / (MCKDIV[3:0] * 2) * 256
+ MCKDIV[3:0] = SAI_CK_x / FS * 512 */
+ if(hsai->Init.AudioFrequency != SAI_AUDIO_FREQUENCY_MCKDIV)
+ {
+ /* Get SAI clock source based on Source clock selection from RCC */
+ freq = SAI_GetInputClock(hsai);
+
+ /* (saiclocksource x 10) to keep Significant digits */
+ tmpregisterGCR = (((freq * 10U) / ((hsai->Init.AudioFrequency) * 512U)));
+
+ hsai->Init.Mckdiv = tmpregisterGCR / 10U;
+
+ /* Round result to the nearest integer */
+ if((tmpregisterGCR % 10U) > 8U)
+ {
+ hsai->Init.Mckdiv+= 1U;
+ }
+ }
+
+ /* Compute CKSTR bits of SAI CR1 according to ClockStrobing and AudioMode */
+ if((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+ {
+ ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? 0U: SAI_xCR1_CKSTR;
+ }
+ else
+ {
+ ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? SAI_xCR1_CKSTR: 0U;
+ }
+
+ /* SAI Block Configuration -------------------------------------------------*/
+ switch(hsai->Init.Synchro)
+ {
+ case SAI_ASYNCHRONOUS :
+ {
+ syncen_bits = 0U;
+ }
+ break;
+ case SAI_SYNCHRONOUS :
+ {
+ syncen_bits = SAI_xCR1_SYNCEN_0;
+ }
+ break;
+ case SAI_SYNCHRONOUS_EXT_SAI1 :
+ case SAI_SYNCHRONOUS_EXT_SAI2 :
+ {
+ syncen_bits = SAI_xCR1_SYNCEN_1;
+ }
+ break;
+ default:
+ break;
+ }
+ /* SAI CR1 Configuration */
+ hsai->Instance->CR1 &= ~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG | SAI_xCR1_DS | \
+ SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN |\
+ SAI_xCR1_MONO | SAI_xCR1_OUTDRIV | SAI_xCR1_DMAEN | \
+ SAI_xCR1_NODIV | SAI_xCR1_MCKDIV);
+
+ hsai->Instance->CR1 |= (hsai->Init.AudioMode | hsai->Init.Protocol | \
+ hsai->Init.DataSize | hsai->Init.FirstBit | \
+ ckstr_bits | syncen_bits | \
+ hsai->Init.MonoStereoMode | hsai->Init.OutputDrive | \
+ hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20U));
+
+ /* SAI CR2 Configuration */
+ hsai->Instance->CR2 &= ~(SAI_xCR2_FTH | SAI_xCR2_FFLUSH | SAI_xCR2_COMP | SAI_xCR2_CPL);
+ hsai->Instance->CR2 |= (hsai->Init.FIFOThreshold | hsai->Init.CompandingMode | hsai->Init.TriState);
+
+ /* SAI Frame Configuration -----------------------------------------*/
+ hsai->Instance->FRCR&=(~(SAI_xFRCR_FRL | SAI_xFRCR_FSALL | SAI_xFRCR_FSDEF | \
+ SAI_xFRCR_FSPOL | SAI_xFRCR_FSOFF));
+ hsai->Instance->FRCR|=((hsai->FrameInit.FrameLength - 1U) |
+ hsai->FrameInit.FSOffset |
+ hsai->FrameInit.FSDefinition |
+ hsai->FrameInit.FSPolarity |
+ ((hsai->FrameInit.ActiveFrameLength - 1U) << 8U));
+
+ /* SAI Block_x SLOT Configuration ------------------------------------------*/
+ /* This register has no meaning in AC 97 and SPDIF audio protocol */
+ hsai->Instance->SLOTR &= ~(SAI_xSLOTR_FBOFF | SAI_xSLOTR_SLOTSZ | \
+ SAI_xSLOTR_NBSLOT | SAI_xSLOTR_SLOTEN );
+
+ hsai->Instance->SLOTR |= hsai->SlotInit.FirstBitOffset | hsai->SlotInit.SlotSize | \
+ (hsai->SlotInit.SlotActive << 16U) | ((hsai->SlotInit.SlotNumber - 1U) << 8U);
+
+ /* Initialize the error code */
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+ /* Initialize the SAI state */
+ hsai->State= HAL_SAI_STATE_READY;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the SAI peripheral.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai)
+{
+ /* Check the SAI handle allocation */
+ if(hsai == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hsai->State = HAL_SAI_STATE_BUSY;
+
+ /* Disabled All interrupt and clear all the flag */
+ hsai->Instance->IMR = 0U;
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Disable the SAI */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_SAI_MspDeInit(hsai);
+
+ /* Initialize the error code */
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+ /* Initialize the SAI state */
+ hsai->State = HAL_SAI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the SAI MSP.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the SAI MSP.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SAI data
+ transfers.
+
+ (+) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated SAI IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (+) Blocking mode functions are :
+ (++) HAL_SAI_Transmit()
+ (++) HAL_SAI_Receive()
+ (++) HAL_SAI_TransmitReceive()
+
+ (+) Non Blocking mode functions with Interrupt are :
+ (++) HAL_SAI_Transmit_IT()
+ (++) HAL_SAI_Receive_IT()
+ (++) HAL_SAI_TransmitReceive_IT()
+
+ (+) Non Blocking mode functions with DMA are :
+ (++) HAL_SAI_Transmit_DMA()
+ (++) HAL_SAI_Receive_DMA()
+ (++) HAL_SAI_TransmitReceive_DMA()
+
+ (+) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_SAI_TxCpltCallback()
+ (++) HAL_SAI_RxCpltCallback()
+ (++) HAL_SAI_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit an amount of data in blocking mode.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t* pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->pBuffPtr = pData;
+ hsai->State = HAL_SAI_STATE_BUSY_TX;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* fill the fifo with data before to enabled the SAI */
+ SAI_FillFifo(hsai);
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ while(hsai->XferCount > 0U)
+ {
+ /* Write data if the FIFO is not full */
+ if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL)
+ {
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ hsai->Instance->DR = (*hsai->pBuffPtr++);
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ hsai->Instance->DR = *((uint16_t *)hsai->pBuffPtr);
+ hsai->pBuffPtr+= 2U;
+ }
+ else
+ {
+ hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+ hsai->pBuffPtr+= 4U;
+ }
+ hsai->XferCount--;
+ }
+ else
+ {
+ /* Check for the Timeout */
+ if((Timeout != HAL_MAX_DELAY) && ((Timeout == 0U)||((HAL_GetTick() - tickstart) > Timeout)))
+ {
+ /* Update error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+
+ /* Clear all the flags */
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+ /* Change the SAI state */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->State = HAL_SAI_STATE_BUSY_RX;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Receive data */
+ while(hsai->XferCount > 0U)
+ {
+ if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_EMPTY)
+ {
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ (*hsai->pBuffPtr++) = hsai->Instance->DR;
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ *((uint16_t*)hsai->pBuffPtr) = hsai->Instance->DR;
+ hsai->pBuffPtr+= 2U;
+ }
+ else
+ {
+ *((uint32_t*)hsai->pBuffPtr) = hsai->Instance->DR;
+ hsai->pBuffPtr+= 4U;
+ }
+ hsai->XferCount--;
+ }
+ else
+ {
+ /* Check for the Timeout */
+ if((Timeout != HAL_MAX_DELAY) && ((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)))
+ {
+ /* Update error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+
+ /* Clear all the flags */
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+ /* Change the SAI state */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+ hsai->State = HAL_SAI_STATE_BUSY_TX;
+
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ hsai->InterruptServiceRoutine = SAI_Transmit_IT8Bit;
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ hsai->InterruptServiceRoutine = SAI_Transmit_IT16Bit;
+ }
+ else
+ {
+ hsai->InterruptServiceRoutine = SAI_Transmit_IT32Bit;
+ }
+
+ /* Fill the fifo before starting the communication */
+ SAI_FillFifo(hsai);
+
+ /* Enable FRQ and OVRUDR interrupts */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+ hsai->State = HAL_SAI_STATE_BUSY_RX;
+
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ hsai->InterruptServiceRoutine = SAI_Receive_IT8Bit;
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ hsai->InterruptServiceRoutine = SAI_Receive_IT16Bit;
+ }
+ else
+ {
+ hsai->InterruptServiceRoutine = SAI_Receive_IT32Bit;
+ }
+
+ /* Enable TXE and OVRUDR interrupts */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pause the audio stream playing from the Media.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ /* Pause the audio file playing by disabling the SAI DMA requests */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resume the audio stream playing from the Media.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ /* Enable the SAI DMA requests */
+ hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+ /* If the SAI peripheral is still not enabled, enable it */
+ if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the audio stream playing from the Media.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ /* Disable the SAI DMA request */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ if(HAL_DMA_Abort(hsai->hdmatx) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ if(hsai->hdmarx != NULL)
+ {
+ if(HAL_DMA_Abort(hsai->hdmarx) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Abort the current transfer and disable the SAI.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ /* Check SAI DMA is enabled or not */
+ if((hsai->Instance->CR1 & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN)
+ {
+ /* Disable the SAI DMA request */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ if(HAL_DMA_Abort(hsai->hdmatx) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ if(hsai->hdmarx != NULL)
+ {
+ if(HAL_DMA_Abort(hsai->hdmarx) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Disabled All interrupt and clear all the flag */
+ hsai->Instance->IMR = 0U;
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with DMA.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+ hsai->State = HAL_SAI_STATE_BUSY_TX;
+
+ /* Set the SAI Tx DMA Half transfer complete callback */
+ hsai->hdmatx->XferHalfCpltCallback = SAI_DMATxHalfCplt;
+
+ /* Set the SAI TxDMA transfer complete callback */
+ hsai->hdmatx->XferCpltCallback = SAI_DMATxCplt;
+
+ /* Set the DMA error callback */
+ hsai->hdmatx->XferErrorCallback = SAI_DMAError;
+
+ /* Set the DMA Tx abort callback */
+ hsai->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the Tx DMA Stream */
+ if(HAL_DMA_Start_IT(hsai->hdmatx, (uint32_t)hsai->pBuffPtr, (uint32_t)&hsai->Instance->DR, hsai->XferSize) != HAL_OK)
+ {
+ __HAL_UNLOCK(hsai);
+ return HAL_ERROR;
+ }
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Enable the interrupts for error handling */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+ /* Enable SAI Tx DMA Request */
+ hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with DMA.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+ if((pData == NULL) || (Size == 0))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsai->State == HAL_SAI_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hsai);
+
+ hsai->pBuffPtr = pData;
+ hsai->XferSize = Size;
+ hsai->XferCount = Size;
+ hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+ hsai->State = HAL_SAI_STATE_BUSY_RX;
+
+ /* Set the SAI Rx DMA Half transfer complete callback */
+ hsai->hdmarx->XferHalfCpltCallback = SAI_DMARxHalfCplt;
+
+ /* Set the SAI Rx DMA transfer complete callback */
+ hsai->hdmarx->XferCpltCallback = SAI_DMARxCplt;
+
+ /* Set the DMA error callback */
+ hsai->hdmarx->XferErrorCallback = SAI_DMAError;
+
+ /* Set the DMA Rx abort callback */
+ hsai->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the Rx DMA Stream */
+ if(HAL_DMA_Start_IT(hsai->hdmarx, (uint32_t)&hsai->Instance->DR, (uint32_t)hsai->pBuffPtr, hsai->XferSize) != HAL_OK)
+ {
+ __HAL_UNLOCK(hsai);
+ return HAL_ERROR;
+ }
+
+ /* Check if the SAI is already enabled */
+ if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+ {
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(hsai);
+ }
+
+ /* Enable the interrupts for error handling */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+ /* Enable SAI Rx DMA Request */
+ hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsai);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable the Tx mute mode.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param val: value sent during the mute @ref SAI_Block_Mute_Value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val)
+{
+ assert_param(IS_SAI_BLOCK_MUTE_VALUE(val));
+
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_MUTE | val);
+ return HAL_OK;
+ }
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Disable the Tx mute mode.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
+ return HAL_OK;
+ }
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Enable the Rx mute detection.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param callback: function called when the mute is detected.
+ * @param counter: number a data before mute detection max 63.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter)
+{
+ assert_param(IS_SAI_BLOCK_MUTE_COUNTER(counter));
+
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ /* set the mute counter */
+ CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTECNT);
+ SET_BIT(hsai->Instance->CR2, (uint32_t)((uint32_t)counter << SAI_xCR2_MUTECNT_OFFSET));
+ hsai->mutecallback = callback;
+ /* enable the IT interrupt */
+ __HAL_SAI_ENABLE_IT(hsai, SAI_IT_MUTEDET);
+ return HAL_OK;
+ }
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Disable the Rx mute detection.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ /* set the mutecallback to NULL */
+ hsai->mutecallback = (SAIcallback)NULL;
+ /* enable the IT interrupt */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_IT_MUTEDET);
+ return HAL_OK;
+ }
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Handle SAI interrupt request.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->State != HAL_SAI_STATE_RESET)
+ {
+ uint32_t itflags = hsai->Instance->SR;
+ uint32_t itsources = hsai->Instance->IMR;
+ uint32_t cr1config = hsai->Instance->CR1;
+ uint32_t tmperror;
+
+ /* SAI Fifo request interrupt occured ------------------------------------*/
+ if(((itflags & SAI_xSR_FREQ) == SAI_xSR_FREQ) && ((itsources & SAI_IT_FREQ) == SAI_IT_FREQ))
+ {
+ hsai->InterruptServiceRoutine(hsai);
+ }
+ /* SAI Overrun error interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_OVRUDR) == SAI_FLAG_OVRUDR) && ((itsources & SAI_IT_OVRUDR) == SAI_IT_OVRUDR))
+ {
+ /* Clear the SAI Overrun flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+ /* Get the SAI error code */
+ tmperror = ((hsai->State == HAL_SAI_STATE_BUSY_RX) ? HAL_SAI_ERROR_OVR : HAL_SAI_ERROR_UDR);
+
+ /* Change the SAI error code */
+ hsai->ErrorCode |= tmperror;
+
+ /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ /* SAI mutedet interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_MUTEDET) == SAI_FLAG_MUTEDET) && ((itsources & SAI_IT_MUTEDET) == SAI_IT_MUTEDET))
+ {
+ /* Clear the SAI mutedet flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_MUTEDET);
+
+ /* call the call back function */
+ if(hsai->mutecallback != (SAIcallback)NULL)
+ {
+ /* inform the user that an RX mute event has been detected */
+ hsai->mutecallback();
+ }
+ }
+ /* SAI AFSDET interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_AFSDET) == SAI_FLAG_AFSDET) && ((itsources & SAI_IT_AFSDET) == SAI_IT_AFSDET))
+ {
+ /* Change the SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_AFSDET;
+
+ /* Check SAI DMA is enabled or not */
+ if((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN)
+ {
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ /* Set the DMA Tx abort callback */
+ hsai->hdmatx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmatx);
+ }
+ else if(hsai->hdmarx != NULL)
+ {
+ /* Set the DMA Rx abort callback */
+ hsai->hdmarx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmarx);
+ }
+ }
+ else
+ {
+ /* Abort SAI */
+ HAL_SAI_Abort(hsai);
+
+ /* Set error callback */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ }
+ /* SAI LFSDET interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_LFSDET) == SAI_FLAG_LFSDET) && ((itsources & SAI_IT_LFSDET) == SAI_IT_LFSDET))
+ {
+ /* Change the SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_LFSDET;
+
+ /* Check SAI DMA is enabled or not */
+ if((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN)
+ {
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ /* Set the DMA Tx abort callback */
+ hsai->hdmatx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmatx);
+ }
+ else if(hsai->hdmarx != NULL)
+ {
+ /* Set the DMA Rx abort callback */
+ hsai->hdmarx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmarx);
+ }
+ }
+ else
+ {
+ /* Abort SAI */
+ HAL_SAI_Abort(hsai);
+
+ /* Set error callback */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ }
+ /* SAI WCKCFG interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_WCKCFG) == SAI_FLAG_WCKCFG) && ((itsources & SAI_IT_WCKCFG) == SAI_IT_WCKCFG))
+ {
+ /* Change the SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_WCKCFG;
+
+ /* Check SAI DMA is enabled or not */
+ if((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN)
+ {
+ /* Abort the SAI DMA Streams */
+ if(hsai->hdmatx != NULL)
+ {
+ /* Set the DMA Tx abort callback */
+ hsai->hdmatx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmatx);
+ }
+ else if(hsai->hdmarx != NULL)
+ {
+ /* Set the DMA Rx abort callback */
+ hsai->hdmarx->XferAbortCallback = SAI_DMAAbort;
+
+ /* Abort DMA in IT mode */
+ HAL_DMA_Abort_IT(hsai->hdmarx);
+ }
+ }
+ else
+ {
+ /* If WCKCFG occurs, SAI audio block is automatically disabled */
+ /* Disable all interrupts and clear all flags */
+ hsai->Instance->IMR = 0U;
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ /* Set the SAI state to ready to be able to start again the process */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Initialize XferCount */
+ hsai->XferCount = 0U;
+
+ /* SAI error Callback */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ }
+ /* SAI CNRDY interrupt occurred ----------------------------------*/
+ else if(((itflags & SAI_FLAG_CNRDY) == SAI_FLAG_CNRDY) && ((itsources & SAI_IT_CNRDY) == SAI_IT_CNRDY))
+ {
+ /* Clear the SAI CNRDY flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_CNRDY);
+
+ /* Change the SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_CNREADY;
+
+ /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */
+ HAL_SAI_ErrorCallback(hsai);
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Transfer Half completed callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+ __weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_TxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer half completed callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_RxHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SAI error callback.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsai);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SAI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SAI_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the SAI handle state.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval HAL state
+ */
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai)
+{
+ return hsai->State;
+}
+
+/**
+* @brief Return the SAI error code.
+* @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for the specified SAI Block.
+* @retval SAI Error Code
+*/
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai)
+{
+ return hsai->ErrorCode;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup SAI_Private_Functions
+ * @brief Private functions
+ * @{
+ */
+
+/**
+ * @brief Initialize the SAI I2S protocol according to the specified parameters
+ * in the SAI_InitTypeDef and create the associated handle.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param protocol: one of the supported protocol.
+ * @param datasize: one of the supported datasize @ref SAI_Protocol_DataSize
+ * the configuration information for SAI module.
+ * @param nbslot: number of slot minimum value is 2 and max is 16.
+ * the value must be a multiple of 2.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+ hsai->Init.Protocol = SAI_FREE_PROTOCOL;
+ hsai->Init.FirstBit = SAI_FIRSTBIT_MSB;
+ /* Compute ClockStrobing according AudioMode */
+ if((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+ { /* Transmit */
+ hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE;
+ }
+ else
+ { /* Receive */
+ hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
+ }
+ hsai->FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
+ hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL;
+ hsai->SlotInit.FirstBitOffset = 0U;
+ hsai->SlotInit.SlotNumber = nbslot;
+
+ /* in IS2 the number of slot must be even */
+ if((nbslot & 0x1U) != 0U)
+ {
+ return HAL_ERROR;
+ }
+
+ switch(protocol)
+ {
+ case SAI_I2S_STANDARD :
+ hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
+ hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
+ break;
+ case SAI_I2S_MSBJUSTIFIED :
+ case SAI_I2S_LSBJUSTIFIED :
+ hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH;
+ hsai->FrameInit.FSOffset = SAI_FS_FIRSTBIT;
+ break;
+ default :
+ return HAL_ERROR;
+ }
+
+ /* Frame definition */
+ switch(datasize)
+ {
+ case SAI_PROTOCOL_DATASIZE_16BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_16;
+ hsai->FrameInit.FrameLength = 32U*(nbslot/2U);
+ hsai->FrameInit.ActiveFrameLength = 16U*(nbslot/2U);
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
+ hsai->Init.DataSize = SAI_DATASIZE_16;
+ hsai->FrameInit.FrameLength = 64U*(nbslot/2U);
+ hsai->FrameInit.ActiveFrameLength = 32U*(nbslot/2U);
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_24BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_24;
+ hsai->FrameInit.FrameLength = 64U*(nbslot/2U);
+ hsai->FrameInit.ActiveFrameLength = 32U*(nbslot/2U);
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_32BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_32;
+ hsai->FrameInit.FrameLength = 64U*(nbslot/2U);
+ hsai->FrameInit.ActiveFrameLength = 32U*(nbslot/2U);
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ default :
+ return HAL_ERROR;
+ }
+ if(protocol == SAI_I2S_LSBJUSTIFIED)
+ {
+ if (datasize == SAI_PROTOCOL_DATASIZE_16BITEXTENDED)
+ {
+ hsai->SlotInit.FirstBitOffset = 16U;
+ }
+ if (datasize == SAI_PROTOCOL_DATASIZE_24BIT)
+ {
+ hsai->SlotInit.FirstBitOffset = 8U;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the SAI PCM protocol according to the specified parameters
+ * in the SAI_InitTypeDef and create the associated handle.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param protocol: one of the supported protocol
+ * @param datasize: one of the supported datasize @ref SAI_Protocol_DataSize
+ * @param nbslot: number of slot minimum value is 1 and the max is 16.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+ hsai->Init.Protocol = SAI_FREE_PROTOCOL;
+ hsai->Init.FirstBit = SAI_FIRSTBIT_MSB;
+ /* Compute ClockStrobing according AudioMode */
+ if((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+ { /* Transmit */
+ hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
+ }
+ else
+ { /* Receive */
+ hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE;
+ }
+ hsai->FrameInit.FSDefinition = SAI_FS_STARTFRAME;
+ hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH;
+ hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
+ hsai->SlotInit.FirstBitOffset = 0U;
+ hsai->SlotInit.SlotNumber = nbslot;
+ hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL;
+
+ switch(protocol)
+ {
+ case SAI_PCM_SHORT :
+ hsai->FrameInit.ActiveFrameLength = 1U;
+ break;
+ case SAI_PCM_LONG :
+ hsai->FrameInit.ActiveFrameLength = 13U;
+ break;
+ default :
+ return HAL_ERROR;
+ }
+
+ switch(datasize)
+ {
+ case SAI_PROTOCOL_DATASIZE_16BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_16;
+ hsai->FrameInit.FrameLength = 16U * nbslot;
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
+ hsai->Init.DataSize = SAI_DATASIZE_16;
+ hsai->FrameInit.FrameLength = 32U * nbslot;
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_24BIT :
+ hsai->Init.DataSize = SAI_DATASIZE_24;
+ hsai->FrameInit.FrameLength = 32U * nbslot;
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ case SAI_PROTOCOL_DATASIZE_32BIT:
+ hsai->Init.DataSize = SAI_DATASIZE_32;
+ hsai->FrameInit.FrameLength = 32U * nbslot;
+ hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+ break;
+ default :
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Fill the fifo.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_FillFifo(SAI_HandleTypeDef *hsai)
+{
+ /* fill the fifo with data before to enabled the SAI */
+ while(((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL) && (hsai->XferCount > 0U))
+ {
+ if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+ {
+ hsai->Instance->DR = (*hsai->pBuffPtr++);
+ }
+ else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+ {
+ hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+ hsai->pBuffPtr+= 2U;
+ }
+ else
+ {
+ hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+ hsai->pBuffPtr+= 4U;
+ }
+ hsai->XferCount--;
+ }
+}
+
+/**
+ * @brief Return the interrupt flag to set according the SAI setup.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @param mode: SAI_MODE_DMA or SAI_MODE_IT
+ * @retval the list of the IT flag to enable
+ */
+static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode)
+{
+ uint32_t tmpIT = SAI_IT_OVRUDR;
+
+ if(mode == SAI_MODE_IT)
+ {
+ tmpIT|= SAI_IT_FREQ;
+ }
+
+ if((hsai->Init.Protocol == SAI_AC97_PROTOCOL) &&
+ ((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODEMASTER_RX)))
+ {
+ tmpIT|= SAI_IT_CNRDY;
+ }
+
+ if((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+ {
+ tmpIT|= SAI_IT_AFSDET | SAI_IT_LFSDET;
+ }
+ else
+ {
+ /* hsai has been configured in master mode */
+ tmpIT|= SAI_IT_WCKCFG;
+ }
+ return tmpIT;
+}
+
+/**
+ * @brief Disable the SAI and wait for the disabling.
+ * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai)
+{
+ register uint32_t count = SAI_DEFAULT_TIMEOUT * (SystemCoreClock /7/1000);
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Disable the SAI instance */
+ __HAL_SAI_DISABLE(hsai);
+
+ do
+ {
+ /* Check for the Timeout */
+ if (count-- == 0)
+ {
+ /* Update error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+ status = HAL_TIMEOUT;
+ break;
+ }
+ } while((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != RESET);
+
+ return status;
+}
+
+/**
+ * @brief Tx Handler for Transmit in Interrupt mode 8-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->XferCount == 0U)
+ {
+ /* Handle the end of the transmission */
+ /* Disable FREQ and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_TxCpltCallback(hsai);
+ }
+ else
+ {
+ /* Write data on DR register */
+ hsai->Instance->DR = (*hsai->pBuffPtr++);
+ hsai->XferCount--;
+ }
+}
+
+/**
+ * @brief Tx Handler for Transmit in Interrupt mode for 16-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->XferCount == 0U)
+ {
+ /* Handle the end of the transmission */
+ /* Disable FREQ and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_TxCpltCallback(hsai);
+ }
+ else
+ {
+ /* Write data on DR register */
+ hsai->Instance->DR = *(uint16_t *)hsai->pBuffPtr;
+ hsai->pBuffPtr+=2U;
+ hsai->XferCount--;
+ }
+}
+
+/**
+ * @brief Tx Handler for Transmit in Interrupt mode for 32-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai)
+{
+ if(hsai->XferCount == 0U)
+ {
+ /* Handle the end of the transmission */
+ /* Disable FREQ and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_TxCpltCallback(hsai);
+ }
+ else
+ {
+ /* Write data on DR register */
+ hsai->Instance->DR = *(uint32_t *)hsai->pBuffPtr;
+ hsai->pBuffPtr+=4U;
+ hsai->XferCount--;
+ }
+}
+
+/**
+ * @brief Rx Handler for Receive in Interrupt mode 8-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai)
+{
+ /* Receive data */
+ (*hsai->pBuffPtr++) = hsai->Instance->DR;
+ hsai->XferCount--;
+
+ /* Check end of the transfer */
+ if(hsai->XferCount == 0U)
+ {
+ /* Disable TXE and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Clear the SAI Overrun flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_RxCpltCallback(hsai);
+ }
+}
+
+/**
+ * @brief Rx Handler for Receive in Interrupt mode for 16-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai)
+{
+ /* Receive data */
+ *(uint16_t*)hsai->pBuffPtr = hsai->Instance->DR;
+ hsai->pBuffPtr+=2U;
+ hsai->XferCount--;
+
+ /* Check end of the transfer */
+ if(hsai->XferCount == 0U)
+ {
+ /* Disable TXE and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Clear the SAI Overrun flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_RxCpltCallback(hsai);
+ }
+}
+
+/**
+ * @brief Rx Handler for Receive in Interrupt mode for 32-Bit transfer.
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval None
+ */
+static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai)
+{
+ /* Receive data */
+ *(uint32_t*)hsai->pBuffPtr = hsai->Instance->DR;
+ hsai->pBuffPtr+=4U;
+ hsai->XferCount--;
+
+ /* Check end of the transfer */
+ if(hsai->XferCount == 0U)
+ {
+ /* Disable TXE and OVRUDR interrupts */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+ /* Clear the SAI Overrun flag */
+ __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+ hsai->State = HAL_SAI_STATE_READY;
+ HAL_SAI_RxCpltCallback(hsai);
+ }
+}
+
+/**
+ * @brief DMA SAI transmit process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ hsai->XferCount = 0U;
+
+ /* Disable SAI Tx DMA Request */
+ hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+
+ /* Stop the interrupts error handling */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+ hsai->State= HAL_SAI_STATE_READY;
+ }
+ HAL_SAI_TxCpltCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI transmit process half complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_SAI_TxHalfCpltCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI receive process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ /* Disable Rx DMA Request */
+ hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+ hsai->XferCount = 0U;
+
+ /* Stop the interrupts error handling */
+ __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+ hsai->State = HAL_SAI_STATE_READY;
+ }
+ HAL_SAI_RxCpltCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_SAI_RxHalfCpltCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI communication error callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Set SAI error code */
+ hsai->ErrorCode |= HAL_SAI_ERROR_DMA;
+
+ if((hsai->hdmatx->ErrorCode == HAL_DMA_ERROR_TE) || (hsai->hdmarx->ErrorCode == HAL_DMA_ERROR_TE))
+ {
+ /* Disable the SAI DMA request */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Set the SAI state ready to be able to start again the process */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Initialize XferCount */
+ hsai->XferCount = 0U;
+ }
+ /* SAI error Callback */
+ HAL_SAI_ErrorCallback(hsai);
+}
+
+/**
+ * @brief DMA SAI Abort callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SAI_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable DMA request */
+ hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+ /* Disable all interrupts and clear all flags */
+ hsai->Instance->IMR = 0U;
+ hsai->Instance->CLRFR = 0xFFFFFFFFU;
+
+ if(hsai->ErrorCode != HAL_SAI_ERROR_WCKCFG)
+ {
+ /* Disable SAI peripheral */
+ SAI_Disable(hsai);
+
+ /* Flush the fifo */
+ SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+ }
+ /* Set the SAI state to ready to be able to start again the process */
+ hsai->State = HAL_SAI_STATE_READY;
+
+ /* Initialize XferCount */
+ hsai->XferCount = 0U;
+
+ /* SAI error Callback */
+ HAL_SAI_ErrorCallback(hsai);
+}
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_SAI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,875 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SAI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_H
+#define __STM32F4xx_HAL_SAI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/** @addtogroup SAI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SAI_Exported_Types SAI Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SAI_STATE_RESET = 0x00U, /*!< SAI not yet initialized or disabled */
+ HAL_SAI_STATE_READY = 0x01U, /*!< SAI initialized and ready for use */
+ HAL_SAI_STATE_BUSY = 0x02U, /*!< SAI internal process is ongoing */
+ HAL_SAI_STATE_BUSY_TX = 0x12U, /*!< Data transmission process is ongoing */
+ HAL_SAI_STATE_BUSY_RX = 0x22U, /*!< Data reception process is ongoing */
+ HAL_SAI_STATE_TIMEOUT = 0x03U, /*!< SAI timeout state */
+ HAL_SAI_STATE_ERROR = 0x04U /*!< SAI error state */
+}HAL_SAI_StateTypeDef;
+
+/**
+ * @brief SAI Callback prototype
+ */
+typedef void (*SAIcallback)(void);
+
+/** @defgroup SAI_Init_Structure_definition SAI Init Structure definition
+ * @brief SAI Init Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t AudioMode; /*!< Specifies the SAI Block audio Mode.
+ This parameter can be a value of @ref SAI_Block_Mode */
+
+ uint32_t Synchro; /*!< Specifies SAI Block synchronization
+ This parameter can be a value of @ref SAI_Block_Synchronization */
+
+ uint32_t SynchroExt; /*!< Specifies SAI external output synchronization, this setup is common
+ for BlockA and BlockB
+ This parameter can be a value of @ref SAI_Block_SyncExt
+ @note: If both audio blocks of same SAI are used, this parameter has
+ to be set to the same value for each audio block */
+
+ uint32_t OutputDrive; /*!< Specifies when SAI Block outputs are driven.
+ This parameter can be a value of @ref SAI_Block_Output_Drive
+ @note this value has to be set before enabling the audio block
+ but after the audio block configuration. */
+
+ uint32_t NoDivider; /*!< Specifies whether master clock will be divided or not.
+ This parameter can be a value of @ref SAI_Block_NoDivider
+ @note If bit NODIV in the SAI_xCR1 register is cleared, the frame length
+ should be aligned to a number equal to a power of 2, from 8 to 256.
+ If bit NODIV in the SAI_xCR1 register is set, the frame length can
+ take any of the values without constraint since the input clock of
+ the audio block should be equal to the bit clock.
+ There is no MCLK_x clock which can be output. */
+
+ uint32_t FIFOThreshold; /*!< Specifies SAI Block FIFO threshold.
+ This parameter can be a value of @ref SAI_Block_Fifo_Threshold */
+
+ uint32_t ClockSource; /*!< Specifies the SAI Block x Clock source.
+ This parameter is not used for STM32F446xx devices. */
+
+ uint32_t AudioFrequency; /*!< Specifies the audio frequency sampling.
+ This parameter can be a value of @ref SAI_Audio_Frequency */
+
+ uint32_t Mckdiv; /*!< Specifies the master clock divider, the parameter will be used if for
+ AudioFrequency the user choice
+ This parameter must be a number between Min_Data = 0 and Max_Data = 15 */
+
+ uint32_t MonoStereoMode; /*!< Specifies if the mono or stereo mode is selected.
+ This parameter can be a value of @ref SAI_Mono_Stereo_Mode */
+
+ uint32_t CompandingMode; /*!< Specifies the companding mode type.
+ This parameter can be a value of @ref SAI_Block_Companding_Mode */
+
+ uint32_t TriState; /*!< Specifies the companding mode type.
+ This parameter can be a value of @ref SAI_TRIState_Management */
+
+ /* This part of the structure is automatically filled if your are using the high level intialisation
+ function HAL_SAI_InitProtocol */
+
+ uint32_t Protocol; /*!< Specifies the SAI Block protocol.
+ This parameter can be a value of @ref SAI_Block_Protocol */
+
+ uint32_t DataSize; /*!< Specifies the SAI Block data size.
+ This parameter can be a value of @ref SAI_Block_Data_Size */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission */
+
+ uint32_t ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity.
+ This parameter can be a value of @ref SAI_Block_Clock_Strobing */
+}SAI_InitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Frame_Structure_definition SAI Frame Structure definition
+ * @brief SAI Frame Init structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t FrameLength; /*!< Specifies the Frame length, the number of SCK clocks for each audio frame.
+ This parameter must be a number between Min_Data = 8 and Max_Data = 256.
+ @note If master clock MCLK_x pin is declared as an output, the frame length
+ should be aligned to a number equal to power of 2 in order to keep
+ in an audio frame, an integer number of MCLK pulses by bit Clock. */
+
+ uint32_t ActiveFrameLength; /*!< Specifies the Frame synchronization active level length.
+ This Parameter specifies the length in number of bit clock (SCK + 1)
+ of the active level of FS signal in audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 128 */
+
+ uint32_t FSDefinition; /*!< Specifies the Frame synchronization definition.
+ This parameter can be a value of @ref SAI_Block_FS_Definition */
+
+ uint32_t FSPolarity; /*!< Specifies the Frame synchronization Polarity.
+ This parameter can be a value of @ref SAI_Block_FS_Polarity */
+
+ uint32_t FSOffset; /*!< Specifies the Frame synchronization Offset.
+ This parameter can be a value of @ref SAI_Block_FS_Offset */
+}SAI_FrameInitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Slot_Structure_definition SAI Slot Structure definition
+ * @brief SAI Block Slot Init Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 24 */
+
+ uint32_t SlotSize; /*!< Specifies the Slot Size.
+ This parameter can be a value of @ref SAI_Block_Slot_Size */
+
+ uint32_t SlotNumber; /*!< Specifies the number of slot in the audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SlotActive; /*!< Specifies the slots in audio frame that will be activated.
+ This parameter can be a value of @ref SAI_Block_Slot_Active */
+}SAI_SlotInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Handle_Structure_definition SAI Handle Structure definition
+ * @brief SAI handle Structure definition
+ * @{
+ */
+typedef struct __SAI_HandleTypeDef
+{
+ SAI_Block_TypeDef *Instance; /*!< SAI Blockx registers base address */
+
+ SAI_InitTypeDef Init; /*!< SAI communication parameters */
+
+ SAI_FrameInitTypeDef FrameInit; /*!< SAI Frame configuration parameters */
+
+ SAI_SlotInitTypeDef SlotInit; /*!< SAI Slot configuration parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to SAI transfer Buffer */
+
+ uint16_t XferSize; /*!< SAI transfer size */
+
+ uint16_t XferCount; /*!< SAI transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SAI Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SAI Rx DMA handle parameters */
+
+ SAIcallback mutecallback;/*!< SAI mute callback */
+
+ void (*InterruptServiceRoutine)(struct __SAI_HandleTypeDef *hsai); /* function pointer for IRQ handler */
+
+ HAL_LockTypeDef Lock; /*!< SAI locking object */
+
+ __IO HAL_SAI_StateTypeDef State; /*!< SAI communication state */
+
+ __IO uint32_t ErrorCode; /*!< SAI Error code */
+}SAI_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Constants SAI Exported Constants
+ * @{
+ */
+
+/** @defgroup SAI_Error_Code SAI Error Code
+ * @{
+ */
+#define HAL_SAI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SAI_ERROR_OVR ((uint32_t)0x00000001U) /*!< Overrun Error */
+#define HAL_SAI_ERROR_UDR ((uint32_t)0x00000002U) /*!< Underrun error */
+#define HAL_SAI_ERROR_AFSDET ((uint32_t)0x00000004U) /*!< Anticipated Frame synchronisation detection */
+#define HAL_SAI_ERROR_LFSDET ((uint32_t)0x00000008U) /*!< Late Frame synchronisation detection */
+#define HAL_SAI_ERROR_CNREADY ((uint32_t)0x00000010U) /*!< codec not ready */
+#define HAL_SAI_ERROR_WCKCFG ((uint32_t)0x00000020U) /*!< Wrong clock configuration */
+#define HAL_SAI_ERROR_TIMEOUT ((uint32_t)0x00000040U) /*!< Timeout error */
+#define HAL_SAI_ERROR_DMA ((uint32_t)0x00000080U) /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_SyncExt SAI External synchronisation
+ * @{
+ */
+#define SAI_SYNCEXT_DISABLE 0U
+#define SAI_SYNCEXT_OUTBLOCKA_ENABLE 1U
+#define SAI_SYNCEXT_OUTBLOCKB_ENABLE 2U
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Protocol SAI Supported protocol
+ * @{
+ */
+#define SAI_I2S_STANDARD 0U
+#define SAI_I2S_MSBJUSTIFIED 1U
+#define SAI_I2S_LSBJUSTIFIED 2U
+#define SAI_PCM_LONG 3U
+#define SAI_PCM_SHORT 4U
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Protocol_DataSize SAI protocol data size
+ * @{
+ */
+#define SAI_PROTOCOL_DATASIZE_16BIT 0U
+#define SAI_PROTOCOL_DATASIZE_16BITEXTENDED 1U
+#define SAI_PROTOCOL_DATASIZE_24BIT 2U
+#define SAI_PROTOCOL_DATASIZE_32BIT 3U
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Clock_Source SAI Clock Source
+ * @{
+ */
+#define SAI_CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define SAI_CLKSOURCE_PLLI2S ((uint32_t)0x00100000U)
+#define SAI_CLKSOURCE_EXT ((uint32_t)0x00200000U)
+#define SAI_CLKSOURCE_NA ((uint32_t)0x00400000U) /*!< No applicable for STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Audio_Frequency SAI Audio Frequency
+ * @{
+ */
+#define SAI_AUDIO_FREQUENCY_192K ((uint32_t)192000U)
+#define SAI_AUDIO_FREQUENCY_96K ((uint32_t)96000U)
+#define SAI_AUDIO_FREQUENCY_48K ((uint32_t)48000U)
+#define SAI_AUDIO_FREQUENCY_44K ((uint32_t)44100U)
+#define SAI_AUDIO_FREQUENCY_32K ((uint32_t)32000U)
+#define SAI_AUDIO_FREQUENCY_22K ((uint32_t)22050U)
+#define SAI_AUDIO_FREQUENCY_16K ((uint32_t)16000U)
+#define SAI_AUDIO_FREQUENCY_11K ((uint32_t)11025U)
+#define SAI_AUDIO_FREQUENCY_8K ((uint32_t)8000U)
+#define SAI_AUDIO_FREQUENCY_MCKDIV ((uint32_t)0U)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mode SAI Block Mode
+ * @{
+ */
+#define SAI_MODEMASTER_TX ((uint32_t)0x00000000U)
+#define SAI_MODEMASTER_RX ((uint32_t)SAI_xCR1_MODE_0)
+#define SAI_MODESLAVE_TX ((uint32_t)SAI_xCR1_MODE_1)
+#define SAI_MODESLAVE_RX ((uint32_t)(SAI_xCR1_MODE_1 | SAI_xCR1_MODE_0))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Protocol SAI Block Protocol
+ * @{
+ */
+#define SAI_FREE_PROTOCOL ((uint32_t)0x00000000U)
+#define SAI_SPDIF_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_0)
+#define SAI_AC97_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_1)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Data_Size SAI Block Data Size
+ * @{
+ */
+#define SAI_DATASIZE_8 ((uint32_t)SAI_xCR1_DS_1)
+#define SAI_DATASIZE_10 ((uint32_t)(SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_16 ((uint32_t)SAI_xCR1_DS_2)
+#define SAI_DATASIZE_20 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_24 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1))
+#define SAI_DATASIZE_32 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_MSB_LSB_transmission SAI Block MSB LSB transmission
+ * @{
+ */
+#define SAI_FIRSTBIT_MSB ((uint32_t)0x00000000U)
+#define SAI_FIRSTBIT_LSB ((uint32_t)SAI_xCR1_LSBFIRST)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Clock_Strobing SAI Block Clock Strobing
+ * @{
+ */
+#define SAI_CLOCKSTROBING_FALLINGEDGE 0U
+#define SAI_CLOCKSTROBING_RISINGEDGE 1U
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Synchronization SAI Block Synchronization
+ * @{
+ */
+#define SAI_ASYNCHRONOUS 0U /*!< Asynchronous */
+#define SAI_SYNCHRONOUS 1U /*!< Synchronous with other block of same SAI */
+#define SAI_SYNCHRONOUS_EXT_SAI1 2U /*!< Synchronous with other SAI, SAI1 */
+#define SAI_SYNCHRONOUS_EXT_SAI2 3U /*!< Synchronous with other SAI, SAI2 */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Output_Drive SAI Block Output Drive
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLE ((uint32_t)0x00000000U)
+#define SAI_OUTPUTDRIVE_ENABLE ((uint32_t)SAI_xCR1_OUTDRIV)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_NoDivider SAI Block NoDivider
+ * @{
+ */
+#define SAI_MASTERDIVIDER_ENABLE ((uint32_t)0x00000000U)
+#define SAI_MASTERDIVIDER_DISABLE ((uint32_t)SAI_xCR1_NODIV)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Definition SAI Block FS Definition
+ * @{
+ */
+#define SAI_FS_STARTFRAME ((uint32_t)0x00000000U)
+#define SAI_FS_CHANNEL_IDENTIFICATION ((uint32_t)SAI_xFRCR_FSDEF)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Polarity SAI Block FS Polarity
+ * @{
+ */
+#define SAI_FS_ACTIVE_LOW ((uint32_t)0x00000000U)
+#define SAI_FS_ACTIVE_HIGH ((uint32_t)SAI_xFRCR_FSPOL)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Offset SAI Block FS Offset
+ * @{
+ */
+#define SAI_FS_FIRSTBIT ((uint32_t)0x00000000U)
+#define SAI_FS_BEFOREFIRSTBIT ((uint32_t)SAI_xFRCR_FSOFF)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_Size SAI Block Slot Size
+ * @{
+ */
+#define SAI_SLOTSIZE_DATASIZE ((uint32_t)0x00000000U)
+#define SAI_SLOTSIZE_16B ((uint32_t)SAI_xSLOTR_SLOTSZ_0)
+#define SAI_SLOTSIZE_32B ((uint32_t)SAI_xSLOTR_SLOTSZ_1)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_Active SAI Block Slot Active
+ * @{
+ */
+#define SAI_SLOT_NOTACTIVE ((uint32_t)0x00000000U)
+#define SAI_SLOTACTIVE_0 ((uint32_t)0x00000001U)
+#define SAI_SLOTACTIVE_1 ((uint32_t)0x00000002U)
+#define SAI_SLOTACTIVE_2 ((uint32_t)0x00000004U)
+#define SAI_SLOTACTIVE_3 ((uint32_t)0x00000008U)
+#define SAI_SLOTACTIVE_4 ((uint32_t)0x00000010U)
+#define SAI_SLOTACTIVE_5 ((uint32_t)0x00000020U)
+#define SAI_SLOTACTIVE_6 ((uint32_t)0x00000040U)
+#define SAI_SLOTACTIVE_7 ((uint32_t)0x00000080U)
+#define SAI_SLOTACTIVE_8 ((uint32_t)0x00000100U)
+#define SAI_SLOTACTIVE_9 ((uint32_t)0x00000200U)
+#define SAI_SLOTACTIVE_10 ((uint32_t)0x00000400U)
+#define SAI_SLOTACTIVE_11 ((uint32_t)0x00000800U)
+#define SAI_SLOTACTIVE_12 ((uint32_t)0x00001000U)
+#define SAI_SLOTACTIVE_13 ((uint32_t)0x00002000U)
+#define SAI_SLOTACTIVE_14 ((uint32_t)0x00004000U)
+#define SAI_SLOTACTIVE_15 ((uint32_t)0x00008000U)
+#define SAI_SLOTACTIVE_ALL ((uint32_t)0x0000FFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Mono_Stereo_Mode SAI Mono Stereo Mode
+ * @{
+ */
+#define SAI_STEREOMODE ((uint32_t)0x00000000U)
+#define SAI_MONOMODE ((uint32_t)SAI_xCR1_MONO)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_TRIState_Management SAI TRIState Management
+ * @{
+ */
+#define SAI_OUTPUT_NOTRELEASED ((uint32_t)0x00000000U)
+#define SAI_OUTPUT_RELEASED ((uint32_t)SAI_xCR2_TRIS)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Threshold SAI Block Fifo Threshold
+ * @{
+ */
+#define SAI_FIFOTHRESHOLD_EMPTY ((uint32_t)0x00000000U)
+#define SAI_FIFOTHRESHOLD_1QF ((uint32_t)(SAI_xCR2_FTH_0))
+#define SAI_FIFOTHRESHOLD_HF ((uint32_t)(SAI_xCR2_FTH_1))
+#define SAI_FIFOTHRESHOLD_3QF ((uint32_t)(SAI_xCR2_FTH_1 | SAI_xCR2_FTH_0))
+#define SAI_FIFOTHRESHOLD_FULL ((uint32_t)(SAI_xCR2_FTH_2))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Companding_Mode SAI Block Companding Mode
+ * @{
+ */
+#define SAI_NOCOMPANDING ((uint32_t)0x00000000U)
+#define SAI_ULAW_1CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1))
+#define SAI_ALAW_1CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0))
+#define SAI_ULAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_CPL))
+#define SAI_ALAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0 | SAI_xCR2_CPL))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mute_Value SAI Block Mute Value
+ * @{
+ */
+#define SAI_ZERO_VALUE ((uint32_t)0x00000000U)
+#define SAI_LAST_SENT_VALUE ((uint32_t)SAI_xCR2_MUTEVAL)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Interrupts_Definition SAI Block Interrupts Definition
+ * @{
+ */
+#define SAI_IT_OVRUDR ((uint32_t)SAI_xIMR_OVRUDRIE)
+#define SAI_IT_MUTEDET ((uint32_t)SAI_xIMR_MUTEDETIE)
+#define SAI_IT_WCKCFG ((uint32_t)SAI_xIMR_WCKCFGIE)
+#define SAI_IT_FREQ ((uint32_t)SAI_xIMR_FREQIE)
+#define SAI_IT_CNRDY ((uint32_t)SAI_xIMR_CNRDYIE)
+#define SAI_IT_AFSDET ((uint32_t)SAI_xIMR_AFSDETIE)
+#define SAI_IT_LFSDET ((uint32_t)SAI_xIMR_LFSDETIE)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Flags_Definition SAI Block Flags Definition
+ * @{
+ */
+#define SAI_FLAG_OVRUDR ((uint32_t)SAI_xSR_OVRUDR)
+#define SAI_FLAG_MUTEDET ((uint32_t)SAI_xSR_MUTEDET)
+#define SAI_FLAG_WCKCFG ((uint32_t)SAI_xSR_WCKCFG)
+#define SAI_FLAG_FREQ ((uint32_t)SAI_xSR_FREQ)
+#define SAI_FLAG_CNRDY ((uint32_t)SAI_xSR_CNRDY)
+#define SAI_FLAG_AFSDET ((uint32_t)SAI_xSR_AFSDET)
+#define SAI_FLAG_LFSDET ((uint32_t)SAI_xSR_LFSDET)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Status_Level SAI Block Fifo Status Level
+ * @{
+ */
+#define SAI_FIFOSTATUS_EMPTY ((uint32_t)0x00000000U)
+#define SAI_FIFOSTATUS_LESS1QUARTERFULL ((uint32_t)0x00010000U)
+#define SAI_FIFOSTATUS_1QUARTERFULL ((uint32_t)0x00020000U)
+#define SAI_FIFOSTATUS_HALFFULL ((uint32_t)0x00030000U)
+#define SAI_FIFOSTATUS_3QUARTERFULL ((uint32_t)0x00040000U)
+#define SAI_FIFOSTATUS_FULL ((uint32_t)0x00050000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Macros SAI Exported Macros
+ * @brief macros to handle interrupts and specific configurations
+ * @{
+ */
+
+/** @brief Reset SAI handle state
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @retval NoneS
+ */
+#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET)
+
+/** @brief Enable or disable the specified SAI interrupts.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable
+ * @arg SAI_IT_MUTEDET: Mute detection interrupt enable
+ * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable
+ * @arg SAI_IT_FREQ: FIFO request interrupt enable
+ * @arg SAI_IT_CNRDY: Codec not ready interrupt enable
+ * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable
+ * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable
+ * @retval None
+ */
+#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__)))
+
+/** @brief Check if the specified SAI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * This parameter can be SAI where x: 1, 2, or 3 to select the SAI peripheral.
+ * @param __INTERRUPT__: specifies the SAI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable
+ * @arg SAI_IT_MUTEDET: Mute detection interrupt enable
+ * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable
+ * @arg SAI_IT_FREQ: FIFO request interrupt enable
+ * @arg SAI_IT_CNRDY: Codec not ready interrupt enable
+ * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable
+ * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SAI flag is set or not.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_FLAG_OVRUDR: Overrun underrun flag.
+ * @arg SAI_FLAG_MUTEDET: Mute detection flag.
+ * @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag.
+ * @arg SAI_FLAG_FREQ: FIFO request flag.
+ * @arg SAI_FLAG_CNRDY: Codec not ready flag.
+ * @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag.
+ * @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the specified SAI pending flag.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SAI_FLAG_OVRUDR: Clear Overrun underrun
+ * @arg SAI_FLAG_MUTEDET: Clear Mute detection
+ * @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration
+ * @arg SAI_FLAG_FREQ: Clear FIFO request
+ * @arg SAI_FLAG_CNRDY: Clear Codec not ready
+ * @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection
+ * @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection
+ * @retval None
+ */
+#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__))
+
+/** @brief Enable SAI
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @retval None
+ */
+#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SAI_xCR1_SAIEN)
+
+/** @brief Disable SAI
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @retval None
+ */
+#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SAI_xCR1_SAIEN)
+
+ /**
+ * @}
+ */
+
+/* Include RCC SAI Extension module */
+#include "stm32f4xx_hal_sai_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SAI_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+/** @addtogroup SAI_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DeInit (SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai);
+
+/**
+ * @}
+ */
+
+/* I/O operation functions *****************************************************/
+/** @addtogroup SAI_Exported_Functions_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai);
+
+/* Abort function */
+HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai);
+
+/* Mute management */
+HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val);
+HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter);
+HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai);
+
+/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai);
+/**
+ * @}
+ */
+
+/** @addtogroup SAI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai);
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup SAI_Private_Macros
+ * @{
+ */
+#define IS_SAI_BLOCK_SYNCEXT(STATE) (((STATE) == SAI_SYNCEXT_DISABLE) ||\
+ ((STATE) == SAI_SYNCEXT_OUTBLOCKA_ENABLE) ||\
+ ((STATE) == SAI_SYNCEXT_OUTBLOCKB_ENABLE))
+
+#define IS_SAI_SUPPORTED_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_I2S_STANDARD) ||\
+ ((PROTOCOL) == SAI_I2S_MSBJUSTIFIED) ||\
+ ((PROTOCOL) == SAI_I2S_LSBJUSTIFIED) ||\
+ ((PROTOCOL) == SAI_PCM_LONG) ||\
+ ((PROTOCOL) == SAI_PCM_SHORT))
+
+#define IS_SAI_PROTOCOL_DATASIZE(DATASIZE) (((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BIT) ||\
+ ((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) ||\
+ ((DATASIZE) == SAI_PROTOCOL_DATASIZE_24BIT) ||\
+ ((DATASIZE) == SAI_PROTOCOL_DATASIZE_32BIT))
+
+#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == SAI_CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == SAI_CLKSOURCE_EXT))
+
+#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_48K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_32K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_16K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_8K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_MCKDIV))
+
+#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_MODEMASTER_TX) || \
+ ((MODE) == SAI_MODEMASTER_RX) || \
+ ((MODE) == SAI_MODESLAVE_TX) || \
+ ((MODE) == SAI_MODESLAVE_RX))
+
+#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL) || \
+ ((PROTOCOL) == SAI_AC97_PROTOCOL) || \
+ ((PROTOCOL) == SAI_SPDIF_PROTOCOL))
+
+#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8) || \
+ ((DATASIZE) == SAI_DATASIZE_10) || \
+ ((DATASIZE) == SAI_DATASIZE_16) || \
+ ((DATASIZE) == SAI_DATASIZE_20) || \
+ ((DATASIZE) == SAI_DATASIZE_24) || \
+ ((DATASIZE) == SAI_DATASIZE_32))
+
+#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \
+ ((BIT) == SAI_FIRSTBIT_LSB))
+
+#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \
+ ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE))
+
+#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \
+ ((SYNCHRO) == SAI_SYNCHRONOUS) || \
+ ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI1) ||\
+ ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI2))
+
+#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLE) || \
+ ((DRIVE) == SAI_OUTPUTDRIVE_ENABLE))
+
+#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLE) || \
+ ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLE))
+
+#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63U)
+
+#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZERO_VALUE) || \
+ ((VALUE) == SAI_LAST_SENT_VALUE))
+
+#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NOCOMPANDING) || \
+ ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_2CPL_COMPANDING))
+
+#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL))
+
+#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\
+ ((STATE) == SAI_OUTPUT_RELEASED))
+
+#define IS_SAI_MONO_STEREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\
+ ((MODE) == SAI_STEREOMODE))
+
+#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((ACTIVE) <= SAI_SLOTACTIVE_ALL)
+
+#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1U <= (NUMBER)) && ((NUMBER) <= 16U))
+
+#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \
+ ((SIZE) == SAI_SLOTSIZE_16B) || \
+ ((SIZE) == SAI_SLOTSIZE_32B))
+
+#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24U)
+
+#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \
+ ((OFFSET) == SAI_FS_BEFOREFIRSTBIT))
+
+#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \
+ ((POLARITY) == SAI_FS_ACTIVE_HIGH))
+
+#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \
+ ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION))
+
+#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15U)
+
+#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8U <= (LENGTH)) && ((LENGTH) <= 256U))
+
+#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1U <= (LENGTH)) && ((LENGTH) <= 128U))
+
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Functions SAI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,278 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SAI Extension HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of SAI extension peripheral:
+ * + Extension features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SAI peripheral extension features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the SAI interface for STM32F446xx
+ devices contains the following additional features :
+
+ (+) Possibility to be clocked from PLLR
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to manage several sources to clock SAI
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SAIEx SAIEx
+ * @brief SAI Extension HAL module driver
+ * @{
+ */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* SAI registers Masks */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SAI_Private_Functions SAI Private Functions
+ * @{
+ */
+ /**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SAIEx_Exported_Functions SAI Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup SAIEx_Exported_Functions_Group1 Extension features functions
+ * @brief Extension features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension features Functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the possible
+ SAI clock sources.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure SAI Block synchronization mode
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval SAI Clock Input
+ */
+void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai)
+{
+ uint32_t tmpregisterGCR = 0U;
+
+#if defined(STM32F446xx)
+ /* This setting must be done with both audio block (A & B) disabled */
+ switch(hsai->Init.SynchroExt)
+ {
+ case SAI_SYNCEXT_DISABLE :
+ tmpregisterGCR = 0U;
+ break;
+ case SAI_SYNCEXT_OUTBLOCKA_ENABLE :
+ tmpregisterGCR = SAI_GCR_SYNCOUT_0;
+ break;
+ case SAI_SYNCEXT_OUTBLOCKB_ENABLE :
+ tmpregisterGCR = SAI_GCR_SYNCOUT_1;
+ break;
+ default:
+ break;
+ }
+
+ if((hsai->Init.Synchro) == SAI_SYNCHRONOUS_EXT_SAI2)
+ {
+ tmpregisterGCR |= SAI_GCR_SYNCIN_0;
+ }
+
+ if((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
+ {
+ SAI1->GCR = tmpregisterGCR;
+ }
+ else
+ {
+ SAI2->GCR = tmpregisterGCR;
+ }
+#endif /* STM32F446xx */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx)
+ /* This setting must be done with both audio block (A & B) disabled */
+ switch(hsai->Init.SynchroExt)
+ {
+ case SAI_SYNCEXT_DISABLE :
+ tmpregisterGCR = 0U;
+ break;
+ case SAI_SYNCEXT_OUTBLOCKA_ENABLE :
+ tmpregisterGCR = SAI_GCR_SYNCOUT_0;
+ break;
+ case SAI_SYNCEXT_OUTBLOCKB_ENABLE :
+ tmpregisterGCR = SAI_GCR_SYNCOUT_1;
+ break;
+ default:
+ break;
+ }
+ SAI1->GCR = tmpregisterGCR;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+}
+ /**
+ * @brief Get SAI Input Clock based on SAI source clock selection
+ * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
+ * the configuration information for SAI module.
+ * @retval SAI Clock Input
+ */
+uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai)
+{
+ /* This variable used to store the SAI_CK_x (value in Hz) */
+ uint32_t saiclocksource = 0U;
+
+#if defined(STM32F446xx)
+ if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
+ {
+ saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1);
+ }
+ else /* SAI2_Block_A || SAI2_Block_B*/
+ {
+ saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2);
+ }
+#endif /* STM32F446xx */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx)
+ uint32_t vcoinput = 0U, tmpreg = 0U;
+
+ /* Check the SAI Block parameters */
+ assert_param(IS_SAI_CLK_SOURCE(hsai->Init.ClockSource));
+
+ /* SAI Block clock source selection */
+ if(hsai->Instance == SAI1_Block_A)
+ {
+ __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(hsai->Init.ClockSource);
+ }
+ else
+ {
+ __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG((uint32_t)(hsai->Init.ClockSource << 2U));
+ }
+
+ /* VCO Input Clock value calculation */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+
+ /* SAI_CLK_x : SAI Block Clock configuration for different clock sources selected */
+ if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLSAI)
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U;
+ saiclocksource = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ tmpreg = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U);
+ saiclocksource = saiclocksource/(tmpreg);
+
+ }
+ else if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLI2S)
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U;
+ saiclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ tmpreg = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U);
+ saiclocksource = saiclocksource/(tmpreg);
+ }
+ else /* sConfig->ClockSource == SAI_CLKSource_Ext */
+ {
+ /* Enable the External Clock selection */
+ __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT);
+
+ saiclocksource = EXTERNAL_CLOCK_VALUE;
+ }
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+ /* the return result is the value of SAI clock */
+ return saiclocksource;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_SAI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sai_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,102 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SAI Extension HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_EX_H
+#define __STM32F4xx_HAL_SAI_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SAIEx
+ * @{
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SAIEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SAIEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Extended features functions ************************************************/
+void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai);
+uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,3510 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sd.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SD card HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Secure Digital (SD) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver implements a high level communication layer for read and write from/to
+ this memory. The needed STM32 hardware resources (SDIO and GPIO) are performed by
+ the user in HAL_SD_MspInit() function (MSP layer).
+ Basically, the MSP layer configuration should be the same as we provide in the
+ examples.
+ You can easily tailor this configuration according to hardware resources.
+
+ [..]
+ This driver is a generic layered driver for SDIO memories which uses the HAL
+ SDIO driver functions to interface with SD and uSD cards devices.
+ It is used as follows:
+
+ (#)Initialize the SDIO low level resources by implement the HAL_SD_MspInit() API:
+ (##) Enable the SDIO interface clock using __HAL_RCC_SDIO_CLK_ENABLE();
+ (##) SDIO pins configuration for SD card
+ (+++) Enable the clock for the SDIO GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these SDIO pins as alternate function pull-up using HAL_GPIO_Init()
+ and according to your pin assignment;
+ (##) DMA Configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA()
+ and HAL_SD_WriteBlocks_DMA() APIs).
+ (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
+ (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
+ (##) NVIC configuration if you need to use interrupt process when using DMA transfer.
+ (+++) Configure the SDIO and DMA interrupt priorities using functions
+ HAL_NVIC_SetPriority(); DMA priority is superior to SDIO's priority
+ (+++) Enable the NVIC DMA and SDIO IRQs using function HAL_NVIC_EnableIRQ()
+ (+++) SDIO interrupts are managed using the macros __HAL_SD_SDIO_ENABLE_IT()
+ and __HAL_SD_SDIO_DISABLE_IT() inside the communication process.
+ (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_SDIO_GET_IT()
+ and __HAL_SD_SDIO_CLEAR_IT()
+ (#) At this stage, you can perform SD read/write/erase operations after SD card initialization
+
+
+ *** SD Card Initialization and configuration ***
+ ================================================
+ [..]
+ To initialize the SD Card, use the HAL_SD_Init() function. It Initializes
+ the SD Card and put it into Standby State (Ready for data transfer).
+ This function provide the following operations:
+
+ (#) Apply the SD Card initialization process at 400KHz and check the SD Card
+ type (Standard Capacity or High Capacity). You can change or adapt this
+ frequency by adjusting the "ClockDiv" field.
+ The SD Card frequency (SDIO_CK) is computed as follows:
+
+ SDIO_CK = SDIOCLK / (ClockDiv + 2)
+
+ In initialization mode and according to the SD Card standard,
+ make sure that the SDIO_CK frequency doesn't exceed 400KHz.
+
+ (#) Get the SD CID and CSD data. All these information are managed by the SDCardInfo
+ structure. This structure provide also ready computed SD Card capacity
+ and Block size.
+
+ -@- These information are stored in SD handle structure in case of future use.
+
+ (#) Configure the SD Card Data transfer frequency. By Default, the card transfer
+ frequency is set to 24MHz. You can change or adapt this frequency by adjusting
+ the "ClockDiv" field.
+ In transfer mode and according to the SD Card standard, make sure that the
+ SDIO_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch.
+ To be able to use a frequency higher than 24MHz, you should use the SDIO
+ peripheral in bypass mode. Refer to the corresponding reference manual
+ for more details.
+
+ (#) Select the corresponding SD Card according to the address read with the step 2.
+
+ (#) Configure the SD Card in wide bus mode: 4-bits data.
+
+ *** SD Card Read operation ***
+ ==============================
+ [..]
+ (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+
+ (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to call the function HAL_SD_CheckReadOperation(), to insure
+ that the read transfer is done correctly in both DMA and SD sides.
+
+ *** SD Card Write operation ***
+ ===============================
+ [..]
+ (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+
+ (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 byte).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to call the function HAL_SD_CheckWriteOperation(), to insure
+ that the write transfer is done correctly in both DMA and SD sides.
+
+ *** SD card status ***
+ ======================
+ [..]
+ (+) At any time, you can check the SD Card status and get the SD card state
+ by using the HAL_SD_GetStatus() function. This function checks first if the
+ SD card is still connected and then get the internal SD Card transfer state.
+ (+) You can also get the SD card SD Status register by using the HAL_SD_SendSDStatus()
+ function.
+
+ *** SD HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in SD HAL driver.
+
+ (+) __HAL_SD_SDIO_ENABLE : Enable the SD device
+ (+) __HAL_SD_SDIO_DISABLE : Disable the SD device
+ (+) __HAL_SD_SDIO_DMA_ENABLE: Enable the SDIO DMA transfer
+ (+) __HAL_SD_SDIO_DMA_DISABLE: Disable the SDIO DMA transfer
+ (+) __HAL_SD_SDIO_ENABLE_IT: Enable the SD device interrupt
+ (+) __HAL_SD_SDIO_DISABLE_IT: Disable the SD device interrupt
+ (+) __HAL_SD_SDIO_GET_FLAG:Check whether the specified SD flag is set or not
+ (+) __HAL_SD_SDIO_CLEAR_FLAG: Clear the SD's pending flags
+
+ (@) You can refer to the SD HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+#ifdef HAL_SD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SD
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup SD_Private_Defines
+ * @{
+ */
+/**
+ * @brief SDIO Data block size
+ */
+#define DATA_BLOCK_SIZE ((uint32_t)(9U << 4U))
+/**
+ * @brief SDIO Static flags, Timeout, FIFO Address
+ */
+#define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\
+ SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\
+ SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\
+ SDIO_FLAG_DBCKEND))
+
+#define SDIO_CMD0TIMEOUT ((uint32_t)0x00010000U)
+
+/**
+ * @brief Mask for errors Card Status R1 (OCR Register)
+ */
+#define SD_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000U)
+#define SD_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000U)
+#define SD_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000U)
+#define SD_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000U)
+#define SD_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000U)
+#define SD_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000U)
+#define SD_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000U)
+#define SD_OCR_COM_CRC_FAILED ((uint32_t)0x00800000U)
+#define SD_OCR_ILLEGAL_CMD ((uint32_t)0x00400000U)
+#define SD_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000U)
+#define SD_OCR_CC_ERROR ((uint32_t)0x00100000U)
+#define SD_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000U)
+#define SD_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000U)
+#define SD_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000U)
+#define SD_OCR_CID_CSD_OVERWRITE ((uint32_t)0x00010000U)
+#define SD_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000U)
+#define SD_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000U)
+#define SD_OCR_ERASE_RESET ((uint32_t)0x00002000U)
+#define SD_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008U)
+#define SD_OCR_ERRORBITS ((uint32_t)0xFDFFE008U)
+
+/**
+ * @brief Masks for R6 Response
+ */
+#define SD_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000U)
+#define SD_R6_ILLEGAL_CMD ((uint32_t)0x00004000U)
+#define SD_R6_COM_CRC_FAILED ((uint32_t)0x00008000U)
+
+#define SD_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000U)
+#define SD_HIGH_CAPACITY ((uint32_t)0x40000000U)
+#define SD_STD_CAPACITY ((uint32_t)0x00000000U)
+#define SD_CHECK_PATTERN ((uint32_t)0x000001AAU)
+
+#define SD_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFFU)
+#define SD_ALLZERO ((uint32_t)0x00000000U)
+
+#define SD_WIDE_BUS_SUPPORT ((uint32_t)0x00040000U)
+#define SD_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000U)
+#define SD_CARD_LOCKED ((uint32_t)0x02000000U)
+
+#define SD_DATATIMEOUT ((uint32_t)0xFFFFFFFFU)
+#define SD_0TO7BITS ((uint32_t)0x000000FFU)
+#define SD_8TO15BITS ((uint32_t)0x0000FF00U)
+#define SD_16TO23BITS ((uint32_t)0x00FF0000U)
+#define SD_24TO31BITS ((uint32_t)0xFF000000U)
+#define SD_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFFU)
+
+#define SD_HALFFIFO ((uint32_t)0x00000008U)
+#define SD_HALFFIFOBYTES ((uint32_t)0x00000020U)
+
+/**
+ * @brief Command Class Supported
+ */
+#define SD_CCCC_LOCK_UNLOCK ((uint32_t)0x00000080U)
+#define SD_CCCC_WRITE_PROT ((uint32_t)0x00000040U)
+#define SD_CCCC_ERASE ((uint32_t)0x00000020U)
+
+/**
+ * @brief Following commands are SD Card Specific commands.
+ * SDIO_APP_CMD should be sent before sending these commands.
+ */
+#define SD_SDIO_SEND_IF_COND ((uint32_t)SD_CMD_HS_SEND_EXT_CSD)
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SD_Private_Functions_Prototypes
+ * @{
+ */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr);
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus);
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus);
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD);
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA);
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR);
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SD_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize the SD
+ card device to be ready for use.
+
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SD card according to the specified parameters in the
+ SD_HandleTypeDef and create the associated handle.
+ * @param hsd: SD handle
+ * @param SDCardInfo: HAL_SD_CardInfoTypedef structure for SD card information
+ * @retval HAL SD error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo)
+{
+ __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SD_InitTypeDef tmpinit;
+
+ /* Allocate lock resource and initialize it */
+ hsd->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_SD_MspInit(hsd);
+
+ /* Default SDIO peripheral configuration for SD card initialization */
+ tmpinit.ClockEdge = SDIO_CLOCK_EDGE_RISING;
+ tmpinit.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
+ tmpinit.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
+ tmpinit.BusWide = SDIO_BUS_WIDE_1B;
+ tmpinit.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
+ tmpinit.ClockDiv = SDIO_INIT_CLK_DIV;
+
+ /* Initialize SDIO peripheral interface with default configuration */
+ SDIO_Init(hsd->Instance, tmpinit);
+
+ /* Identify card operating voltage */
+ errorstate = SD_PowerON(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Initialize the present SDIO card(s) and put them in idle state */
+ errorstate = SD_Initialize_Cards(hsd);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Read CSD/CID MSD registers */
+ errorstate = HAL_SD_Get_CardInfo(hsd, SDCardInfo);
+
+ if (errorstate == SD_OK)
+ {
+ /* Select the Card */
+ errorstate = SD_Select_Deselect(hsd, (uint32_t)(((uint32_t)SDCardInfo->RCA) << 16U));
+ }
+
+ /* Configure SDIO peripheral interface */
+ SDIO_Init(hsd->Instance, hsd->Init);
+
+ return errorstate;
+}
+
+/**
+ * @brief De-Initializes the SD card.
+ * @param hsd: SD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd)
+{
+
+ /* Set SD power state to off */
+ SD_PowerOFF(hsd);
+
+ /* De-Initialize the MSP layer */
+ HAL_SD_MspDeInit(hsd);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the SD MSP.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-Initialize SD MSP.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group2
+ * @brief Data transfer functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the data
+ transfer from/to SD card.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by polling mode.
+ * @param hsd: SD handle
+ * @param pReadBuffer: pointer to the buffer that will contain the received data
+ * @param ReadAddr: Address from where data is to be read
+ * @param BlockSize: SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of SD blocks to read
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t count = 0U, *tempbuff = (uint32_t *)pReadBuffer;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512U;
+ ReadAddr /= 512U;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t) BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize;
+ sdio_datainitstructure.DataBlockSize = DATA_BLOCK_SIZE;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ if(NumberOfBlocks > 1U)
+ {
+ /* Send CMD18 READ_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+ }
+ else
+ {
+ /* Send CMD17 READ_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Read block(s) in polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Poll on SDIO flags */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ /* Read data from SDIO Rx FIFO */
+ for (count = 0U; count < 8U; count++)
+ {
+ *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ tempbuff += 8U;
+ }
+ }
+ }
+ else
+ {
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* In case of single block transfer, no need of stop transfer at all */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ /* Read data from SDIO Rx FIFO */
+ for (count = 0U; count < 8U; count++)
+ {
+ *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ tempbuff += 8U;
+ }
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock read */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
+ {
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) ||\
+ (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send stop transmission command */
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+ }
+
+ /* Get error state */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ count = SD_DATATIMEOUT;
+
+ /* Empty FIFO if there is still any data */
+ while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0U))
+ {
+ *tempbuff = SDIO_ReadFIFO(hsd->Instance);
+ tempbuff++;
+ count--;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Allows to write block(s) to a specified address in a card. The Data
+ * transfer is managed by polling mode.
+ * @param hsd: SD handle
+ * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit
+ * @param WriteAddr: Address from where data is to be written
+ * @param BlockSize: SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of SD blocks to write
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t totalnumberofbytes = 0U, bytestransferred = 0U, count = 0U, restwords = 0U;
+ uint32_t *tempbuff = (uint32_t *)pWriteBuffer;
+ uint8_t cardstate = 0U;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512U;
+ WriteAddr /= 512U;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ if(NumberOfBlocks > 1U)
+ {
+ /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+ }
+ else
+ {
+ /* Send CMD24 WRITE_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ if(NumberOfBlocks > 1U)
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+ }
+ else
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+ }
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Set total number of bytes to write */
+ totalnumberofbytes = NumberOfBlocks * BlockSize;
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Write block(s) in polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
+ {
+ if ((totalnumberofbytes - bytestransferred) < 32U)
+ {
+ restwords = ((totalnumberofbytes - bytestransferred) % 4U == 0U) ? ((totalnumberofbytes - bytestransferred) / 4U) : (( totalnumberofbytes - bytestransferred) / 4U + 1U);
+
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0U; count < restwords; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, tempbuff);
+ tempbuff++;
+ bytestransferred += 4U;
+ }
+ }
+ else
+ {
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0U; count < 8U; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
+ }
+
+ tempbuff += 8U;
+ bytestransferred += 32U;
+ }
+ }
+ }
+ }
+ else
+ {
+ /* In case of single data block transfer no need of stop command at all */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
+ {
+ if ((totalnumberofbytes - bytestransferred) < 32U)
+ {
+ restwords = ((totalnumberofbytes - bytestransferred) % 4U == 0U) ? ((totalnumberofbytes - bytestransferred) / 4U) : (( totalnumberofbytes - bytestransferred) / 4U + 1U);
+
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0U; count < restwords; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, tempbuff);
+ tempbuff++;
+ bytestransferred += 4U;
+ }
+ }
+ else
+ {
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0U; count < 8U; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
+ }
+
+ tempbuff += 8U;
+ bytestransferred += 32U;
+ }
+ }
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock write */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
+ {
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send stop transmission command */
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+ }
+
+ /* Get error state */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
+
+ errorstate = SD_TX_UNDERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Wait till the card is in programming state */
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+
+ while ((errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+ {
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by the function HAL_SD_CheckReadOperation()
+ * to check the completion of the read process
+ * @param hsd: SD handle
+ * @param pReadBuffer: Pointer to the buffer that will contain the received data
+ * @param ReadAddr: Address from where data is to be read
+ * @param BlockSize: SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of blocks to read.
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ /* Initialize handle flags */
+ hsd->SdTransferCplt = 0U;
+ hsd->DmaTransferCplt = 0U;
+ hsd->SdTransferErr = SD_OK;
+
+ /* Initialize SD Read operation */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->SdOperation = SD_READ_MULTIPLE_BLOCK;
+ }
+ else
+ {
+ hsd->SdOperation = SD_READ_SINGLE_BLOCK;
+ }
+
+ /* Enable transfer interrupts */
+#ifdef SDIO_STA_STBITERR
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_RXOVERR |\
+ SDIO_IT_STBITERR));
+#else /* SDIO_STA_STBITERR not defined */
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_RXOVERR));
+#endif /* SDIO_STA_STBITERR */
+
+ /* Enable SDIO DMA transfer */
+ __HAL_SD_SDIO_DMA_ENABLE();
+
+ /* Configure DMA user callbacks */
+ hsd->hdmarx->XferCpltCallback = SD_DMA_RxCplt;
+ hsd->hdmarx->XferErrorCallback = SD_DMA_RxError;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pReadBuffer, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512U;
+ ReadAddr /= 512U;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Check number of blocks command */
+ if(NumberOfBlocks > 1U)
+ {
+ /* Send CMD18 READ_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+ }
+ else
+ {
+ /* Send CMD17 READ_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ if(NumberOfBlocks > 1U)
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+ }
+ else
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
+ }
+
+ /* Update the SD transfer error in SD handle */
+ hsd->SdTransferErr = errorstate;
+
+ return errorstate;
+}
+
+
+/**
+ * @brief Writes block(s) to a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by the function HAL_SD_CheckWriteOperation()
+ * to check the completion of the write process (by SD current status polling).
+ * @param hsd: SD handle
+ * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit
+ * @param WriteAddr: Address from where data is to be read
+ * @param BlockSize: the SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of blocks to write
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ /* Initialize handle flags */
+ hsd->SdTransferCplt = 0U;
+ hsd->DmaTransferCplt = 0U;
+ hsd->SdTransferErr = SD_OK;
+
+ /* Initialize SD Write operation */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->SdOperation = SD_WRITE_MULTIPLE_BLOCK;
+ }
+ else
+ {
+ hsd->SdOperation = SD_WRITE_SINGLE_BLOCK;
+ }
+
+ /* Enable transfer interrupts */
+#ifdef SDIO_STA_STBITERR
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_TXUNDERR |\
+ SDIO_IT_STBITERR));
+#else /* SDIO_STA_STBITERR not defined */
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_TXUNDERR));
+#endif /* SDIO_STA_STBITERR */
+
+ /* Configure DMA user callbacks */
+ hsd->hdmatx->XferCpltCallback = SD_DMA_TxCplt;
+ hsd->hdmatx->XferErrorCallback = SD_DMA_TxError;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pWriteBuffer, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+
+ /* Enable SDIO DMA transfer */
+ __HAL_SD_SDIO_DMA_ENABLE();
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512U;
+ WriteAddr /= 512U;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Check number of blocks command */
+ if(NumberOfBlocks <= 1U)
+ {
+ /* Send CMD24 WRITE_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+ }
+ else
+ {
+ /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ if(NumberOfBlocks > 1U)
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+ }
+ else
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+ }
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ hsd->SdTransferErr = errorstate;
+
+ return errorstate;
+}
+
+/**
+ * @brief This function waits until the SD DMA data read transfer is finished.
+ * This API should be called after HAL_SD_ReadBlocks_DMA() function
+ * to insure that all data sent by the card is already transferred by the
+ * DMA controller.
+ * @param hsd: SD handle
+ * @param Timeout: Timeout duration
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t timeout = Timeout;
+ uint32_t tmp1, tmp2;
+ HAL_SD_ErrorTypedef tmp3;
+
+ /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+
+ while ((tmp1 == 0U) && (tmp2 == 0U) && (tmp3 == SD_OK) && (timeout > 0U))
+ {
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+ timeout--;
+ }
+
+ timeout = Timeout;
+
+ /* Wait until the Rx transfer is no longer active */
+ while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXACT)) && (timeout > 0U))
+ {
+ timeout--;
+ }
+
+ /* Send stop command in multiblock read */
+ if (hsd->SdOperation == SD_READ_MULTIPLE_BLOCK)
+ {
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+
+ if ((timeout == 0U) && (errorstate == SD_OK))
+ {
+ errorstate = SD_DATA_TIMEOUT;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Return error state */
+ if (hsd->SdTransferErr != SD_OK)
+ {
+ return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief This function waits until the SD DMA data write transfer is finished.
+ * This API should be called after HAL_SD_WriteBlocks_DMA() function
+ * to insure that all data sent by the card is already transferred by the
+ * DMA controller.
+ * @param hsd: SD handle
+ * @param Timeout: Timeout duration
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t timeout = Timeout;
+ uint32_t tmp1, tmp2;
+ HAL_SD_ErrorTypedef tmp3;
+
+ /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+
+ while ((tmp1 == 0U) && (tmp2 == 0U) && (tmp3 == SD_OK) && (timeout > 0U))
+ {
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+ timeout--;
+ }
+
+ timeout = Timeout;
+
+ /* Wait until the Tx transfer is no longer active */
+ while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXACT)) && (timeout > 0U))
+ {
+ timeout--;
+ }
+
+ /* Send stop command in multiblock write */
+ if (hsd->SdOperation == SD_WRITE_MULTIPLE_BLOCK)
+ {
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+
+ if ((timeout == 0U) && (errorstate == SD_OK))
+ {
+ errorstate = SD_DATA_TIMEOUT;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Return error state */
+ if (hsd->SdTransferErr != SD_OK)
+ {
+ return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+ }
+
+ /* Wait until write is complete */
+ while(HAL_SD_GetStatus(hsd) != SD_TRANSFER_OK)
+ {
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Erases the specified memory area of the given SD card.
+ * @param hsd: SD handle
+ * @param startaddr: Start byte address
+ * @param endaddr: End byte address
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+
+ uint32_t delay = 0U;
+ __IO uint32_t maxdelay = 0U;
+ uint8_t cardstate = 0U;
+
+ /* Check if the card command class supports erase command */
+ if (((hsd->CSD[1U] >> 20U) & SD_CCCC_ERASE) == 0U)
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+
+ /* Get max delay value */
+ maxdelay = 120000U / (((hsd->Instance->CLKCR) & 0xFFU) + 2U);
+
+ if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Get start and end block for high capacity cards */
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ startaddr /= 512U;
+ endaddr /= 512U;
+ }
+
+ /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send CMD32 SD_ERASE_GRP_START with argument as addr */
+ sdio_cmdinitstructure.Argument =(uint32_t)startaddr;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_START;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_START);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD33 SD_ERASE_GRP_END with argument as addr */
+ sdio_cmdinitstructure.Argument = (uint32_t)endaddr;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_END;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_END);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+ }
+
+ /* Send CMD38 ERASE */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_ERASE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_ERASE);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ for (; delay < maxdelay; delay++)
+ {
+ }
+
+ /* Wait until the card is in programming state */
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+
+ delay = SD_DATATIMEOUT;
+
+ while ((delay > 0U) && (errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+ {
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+ delay--;
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief This function handles SD card interrupt request.
+ * @param hsd: SD handle
+ * @retval None
+ */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd)
+{
+ /* Check for SDIO interrupt flags */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DATAEND))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_IT_DATAEND);
+
+ /* SD transfer is complete */
+ hsd->SdTransferCplt = 1U;
+
+ /* No transfer error */
+ hsd->SdTransferErr = SD_OK;
+
+ HAL_SD_XferCpltCallback(hsd);
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ hsd->SdTransferErr = SD_DATA_CRC_FAIL;
+
+ HAL_SD_XferErrorCallback(hsd);
+
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ hsd->SdTransferErr = SD_DATA_TIMEOUT;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ hsd->SdTransferErr = SD_RX_OVERRUN;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_TXUNDERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
+
+ hsd->SdTransferErr = SD_TX_UNDERRUN;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ hsd->SdTransferErr = SD_START_BIT_ERR;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Disable all SDIO peripheral interrupt sources */
+#ifdef SDIO_STA_STBITERR
+ __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\
+ SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
+ SDIO_IT_RXOVERR | SDIO_IT_STBITERR);
+#else /* SDIO_STA_STBITERR not defined */
+ __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\
+ SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
+ SDIO_IT_RXOVERR);
+#endif /* SDIO_STA_STBITERR */
+}
+
+
+/**
+ * @brief SD end of transfer callback.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_XferCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Transfer Error callback.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_XferErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Transfer complete Rx callback in non blocking mode.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD DMA transfer complete Rx error callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_RxErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Transfer complete Tx callback in non blocking mode.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD DMA transfer complete error Tx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_TxErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group3
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SD card
+ operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns information about specific card.
+ * @param hsd: SD handle
+ * @param pCardInfo: Pointer to a HAL_SD_CardInfoTypedef structure that
+ * contains all SD cardinformation
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t tmp = 0U;
+
+ pCardInfo->CardType = (uint8_t)(hsd->CardType);
+ pCardInfo->RCA = (uint16_t)(hsd->RCA);
+
+ /* Byte 0 */
+ tmp = (hsd->CSD[0U] & 0xFF000000U) >> 24U;
+ pCardInfo->SD_csd.CSDStruct = (uint8_t)((tmp & 0xC0U) >> 6U);
+ pCardInfo->SD_csd.SysSpecVersion = (uint8_t)((tmp & 0x3CU) >> 2U);
+ pCardInfo->SD_csd.Reserved1 = tmp & 0x03U;
+
+ /* Byte 1 */
+ tmp = (hsd->CSD[0U] & 0x00FF0000U) >> 16U;
+ pCardInfo->SD_csd.TAAC = (uint8_t)tmp;
+
+ /* Byte 2 */
+ tmp = (hsd->CSD[0U] & 0x0000FF00U) >> 8U;
+ pCardInfo->SD_csd.NSAC = (uint8_t)tmp;
+
+ /* Byte 3 */
+ tmp = hsd->CSD[0U] & 0x000000FFU;
+ pCardInfo->SD_csd.MaxBusClkFrec = (uint8_t)tmp;
+
+ /* Byte 4 */
+ tmp = (hsd->CSD[1U] & 0xFF000000U) >> 24U;
+ pCardInfo->SD_csd.CardComdClasses = (uint16_t)(tmp << 4U);
+
+ /* Byte 5 */
+ tmp = (hsd->CSD[1U] & 0x00FF0000U) >> 16U;
+ pCardInfo->SD_csd.CardComdClasses |= (uint16_t)((tmp & 0xF0) >> 4U);
+ pCardInfo->SD_csd.RdBlockLen = (uint8_t)(tmp & 0x0FU);
+
+ /* Byte 6 */
+ tmp = (hsd->CSD[1U] & 0x0000FF00U) >> 8U;
+ pCardInfo->SD_csd.PartBlockRead = (uint8_t)((tmp & 0x80U) >> 7U);
+ pCardInfo->SD_csd.WrBlockMisalign = (uint8_t)((tmp & 0x40U) >> 6U);
+ pCardInfo->SD_csd.RdBlockMisalign = (uint8_t)((tmp & 0x20U) >> 5U);
+ pCardInfo->SD_csd.DSRImpl = (uint8_t)((tmp & 0x10U) >> 4U);
+ pCardInfo->SD_csd.Reserved2 = 0U; /*!< Reserved */
+
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0))
+ {
+ pCardInfo->SD_csd.DeviceSize = (tmp & 0x03U) << 10U;
+
+ /* Byte 7 */
+ tmp = (uint8_t)(hsd->CSD[1U] & 0x000000FFU);
+ pCardInfo->SD_csd.DeviceSize |= (tmp) << 2U;
+
+ /* Byte 8 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_csd.DeviceSize |= (tmp & 0xC0U) >> 6U;
+
+ pCardInfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38U) >> 3U;
+ pCardInfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07U);
+
+ /* Byte 9 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0U) >> 5U;
+ pCardInfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1CU) >> 2U;
+ pCardInfo->SD_csd.DeviceSizeMul = (tmp & 0x03U) << 1U;
+ /* Byte 10 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_csd.DeviceSizeMul |= (tmp & 0x80U) >> 7U;
+
+ pCardInfo->CardCapacity = (pCardInfo->SD_csd.DeviceSize + 1U) ;
+ pCardInfo->CardCapacity *= (1U << (pCardInfo->SD_csd.DeviceSizeMul + 2U));
+ pCardInfo->CardBlockSize = 1U << (pCardInfo->SD_csd.RdBlockLen);
+ pCardInfo->CardCapacity *= pCardInfo->CardBlockSize;
+ }
+ else if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ /* Byte 7 */
+ tmp = (uint8_t)(hsd->CSD[1U] & 0x000000FFU);
+ pCardInfo->SD_csd.DeviceSize = (tmp & 0x3FU) << 16U;
+
+ /* Byte 8 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0xFF000000U) >> 24U);
+
+ pCardInfo->SD_csd.DeviceSize |= (tmp << 8U);
+
+ /* Byte 9 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0x00FF0000U) >> 16U);
+
+ pCardInfo->SD_csd.DeviceSize |= (tmp);
+
+ /* Byte 10 */
+ tmp = (uint8_t)((hsd->CSD[2U] & 0x0000FF00U) >> 8U);
+
+ pCardInfo->CardCapacity = (uint64_t)((((uint64_t)pCardInfo->SD_csd.DeviceSize + 1U)) * 512U * 1024U);
+ pCardInfo->CardBlockSize = 512U;
+ }
+ else
+ {
+ /* Not supported card type */
+ errorstate = SD_ERROR;
+ }
+
+ pCardInfo->SD_csd.EraseGrSize = (tmp & 0x40U) >> 6U;
+ pCardInfo->SD_csd.EraseGrMul = (tmp & 0x3FU) << 1U;
+
+ /* Byte 11 */
+ tmp = (uint8_t)(hsd->CSD[2U] & 0x000000FFU);
+ pCardInfo->SD_csd.EraseGrMul |= (tmp & 0x80U) >> 7U;
+ pCardInfo->SD_csd.WrProtectGrSize = (tmp & 0x7FU);
+
+ /* Byte 12 */
+ tmp = (uint8_t)((hsd->CSD[3U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_csd.WrProtectGrEnable = (tmp & 0x80U) >> 7U;
+ pCardInfo->SD_csd.ManDeflECC = (tmp & 0x60U) >> 5U;
+ pCardInfo->SD_csd.WrSpeedFact = (tmp & 0x1CU) >> 2U;
+ pCardInfo->SD_csd.MaxWrBlockLen = (tmp & 0x03U) << 2U;
+
+ /* Byte 13 */
+ tmp = (uint8_t)((hsd->CSD[3U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_csd.MaxWrBlockLen |= (tmp & 0xC0U) >> 6U;
+ pCardInfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20U) >> 5U;
+ pCardInfo->SD_csd.Reserved3 = 0U;
+ pCardInfo->SD_csd.ContentProtectAppli = (tmp & 0x01U);
+
+ /* Byte 14 */
+ tmp = (uint8_t)((hsd->CSD[3U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_csd.FileFormatGrouop = (tmp & 0x80U) >> 7U;
+ pCardInfo->SD_csd.CopyFlag = (tmp & 0x40U) >> 6U;
+ pCardInfo->SD_csd.PermWrProtect = (tmp & 0x20U) >> 5U;
+ pCardInfo->SD_csd.TempWrProtect = (tmp & 0x10U) >> 4U;
+ pCardInfo->SD_csd.FileFormat = (tmp & 0x0CU) >> 2U;
+ pCardInfo->SD_csd.ECC = (tmp & 0x03U);
+
+ /* Byte 15 */
+ tmp = (uint8_t)(hsd->CSD[3U] & 0x000000FFU);
+ pCardInfo->SD_csd.CSD_CRC = (tmp & 0xFEU) >> 1U;
+ pCardInfo->SD_csd.Reserved4 = 1U;
+
+ /* Byte 0 */
+ tmp = (uint8_t)((hsd->CID[0U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_cid.ManufacturerID = tmp;
+
+ /* Byte 1 */
+ tmp = (uint8_t)((hsd->CID[0U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_cid.OEM_AppliID = tmp << 8U;
+
+ /* Byte 2 */
+ tmp = (uint8_t)((hsd->CID[0U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_cid.OEM_AppliID |= tmp;
+
+ /* Byte 3 */
+ tmp = (uint8_t)(hsd->CID[0U] & 0x000000FFU);
+ pCardInfo->SD_cid.ProdName1 = tmp << 24U;
+
+ /* Byte 4 */
+ tmp = (uint8_t)((hsd->CID[1U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_cid.ProdName1 |= tmp << 16U;
+
+ /* Byte 5 */
+ tmp = (uint8_t)((hsd->CID[1U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_cid.ProdName1 |= tmp << 8U;
+
+ /* Byte 6 */
+ tmp = (uint8_t)((hsd->CID[1U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_cid.ProdName1 |= tmp;
+
+ /* Byte 7 */
+ tmp = (uint8_t)(hsd->CID[1U] & 0x000000FFU);
+ pCardInfo->SD_cid.ProdName2 = tmp;
+
+ /* Byte 8 */
+ tmp = (uint8_t)((hsd->CID[2U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_cid.ProdRev = tmp;
+
+ /* Byte 9 */
+ tmp = (uint8_t)((hsd->CID[2U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_cid.ProdSN = tmp << 24U;
+
+ /* Byte 10 */
+ tmp = (uint8_t)((hsd->CID[2U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_cid.ProdSN |= tmp << 16U;
+
+ /* Byte 11 */
+ tmp = (uint8_t)(hsd->CID[2U] & 0x000000FFU);
+ pCardInfo->SD_cid.ProdSN |= tmp << 8U;
+
+ /* Byte 12 */
+ tmp = (uint8_t)((hsd->CID[3U] & 0xFF000000U) >> 24U);
+ pCardInfo->SD_cid.ProdSN |= tmp;
+
+ /* Byte 13 */
+ tmp = (uint8_t)((hsd->CID[3U] & 0x00FF0000U) >> 16U);
+ pCardInfo->SD_cid.Reserved1 |= (tmp & 0xF0U) >> 4U;
+ pCardInfo->SD_cid.ManufactDate = (tmp & 0x0FU) << 8U;
+
+ /* Byte 14 */
+ tmp = (uint8_t)((hsd->CID[3U] & 0x0000FF00U) >> 8U);
+ pCardInfo->SD_cid.ManufactDate |= tmp;
+
+ /* Byte 15 */
+ tmp = (uint8_t)(hsd->CID[3U] & 0x000000FFU);
+ pCardInfo->SD_cid.CID_CRC = (tmp & 0xFEU) >> 1U;
+ pCardInfo->SD_cid.Reserved2 = 1U;
+
+ return errorstate;
+}
+
+/**
+ * @brief Enables wide bus operation for the requested card if supported by
+ * card.
+ * @param hsd: SD handle
+ * @param WideMode: Specifies the SD card wide bus mode
+ * This parameter can be one of the following values:
+ * @arg SDIO_BUS_WIDE_8B: 8-bit data transfer (Only for MMC)
+ * @arg SDIO_BUS_WIDE_4B: 4-bit data transfer
+ * @arg SDIO_BUS_WIDE_1B: 1-bit data transfer
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SDIO_InitTypeDef tmpinit;
+
+ /* MMC Card does not support this feature */
+ if (hsd->CardType == MULTIMEDIA_CARD)
+ {
+ errorstate = SD_UNSUPPORTED_FEATURE;
+
+ return errorstate;
+ }
+ else if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ if (WideMode == SDIO_BUS_WIDE_8B)
+ {
+ errorstate = SD_UNSUPPORTED_FEATURE;
+ }
+ else if (WideMode == SDIO_BUS_WIDE_4B)
+ {
+ errorstate = SD_WideBus_Enable(hsd);
+ }
+ else if (WideMode == SDIO_BUS_WIDE_1B)
+ {
+ errorstate = SD_WideBus_Disable(hsd);
+ }
+ else
+ {
+ /* WideMode is not a valid argument*/
+ errorstate = SD_INVALID_PARAMETER;
+ }
+
+ if (errorstate == SD_OK)
+ {
+ /* Configure the SDIO peripheral */
+ tmpinit.ClockEdge = hsd->Init.ClockEdge;
+ tmpinit.ClockBypass = hsd->Init.ClockBypass;
+ tmpinit.ClockPowerSave = hsd->Init.ClockPowerSave;
+ tmpinit.BusWide = WideMode;
+ tmpinit.HardwareFlowControl = hsd->Init.HardwareFlowControl;
+ tmpinit.ClockDiv = hsd->Init.ClockDiv;
+ SDIO_Init(hsd->Instance, tmpinit);
+ }
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Aborts an ongoing data transfer.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Send CMD12 STOP_TRANSMISSION */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_STOP_TRANSMISSION;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_STOP_TRANSMISSION);
+
+ return errorstate;
+}
+
+/**
+ * @brief Switches the SD card to High Speed mode.
+ * This API must be used after "Transfer State"
+ * @note This operation should be followed by the configuration
+ * of PLL to have SDIOCK clock between 67 and 75 MHz
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+
+ uint8_t SD_hs[64U] = {0U};
+ uint32_t SD_scr[2U] = {0U, 0U};
+ uint32_t SD_SPEC = 0U;
+ uint32_t count = 0U, *tempbuff = (uint32_t *)SD_hs;
+
+ /* Initialize the Data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, SD_scr);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Test the Version supported by the card*/
+ SD_SPEC = (SD_scr[1U] & 0x01000000U) | (SD_scr[1U] & 0x02000000U);
+
+ if (SD_SPEC != SD_ALLZERO)
+ {
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)64U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = 64U;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B ;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Send CMD6 switch mode */
+ sdio_cmdinitstructure.Argument = 0x80FFFF01U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_HS_SWITCH;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_HS_SWITCH);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ for (count = 0U; count < 8U; count++)
+ {
+ *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ tempbuff += 8U;
+ }
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ count = SD_DATATIMEOUT;
+
+ while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0U))
+ {
+ *tempbuff = SDIO_ReadFIFO(hsd->Instance);
+ tempbuff++;
+ count--;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Test if the switch mode HS is ok */
+ if ((SD_hs[13U]& 2U) != 2U)
+ {
+ errorstate = SD_UNSUPPORTED_FEATURE;
+ }
+ }
+
+ return errorstate;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group4
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in runtime the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the current SD card's status.
+ * @param hsd: SD handle
+ * @param pSDstatus: Pointer to the buffer that will contain the SD card status
+ * SD Status register)
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t count = 0U;
+
+ /* Check SD response */
+ if ((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Set block size for card if it is not equal to current block size for card */
+ sdio_cmdinitstructure.Argument = 64U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD55 */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = 64U;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Send ACMD13 (SD_APP_STATUS) with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_STATUS;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_STATUS);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get status data */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ for (count = 0U; count < 8U; count++)
+ {
+ *(pSDstatus + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ pSDstatus += 8U;
+ }
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ count = SD_DATATIMEOUT;
+ while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0U))
+ {
+ *pSDstatus = SDIO_ReadFIFO(hsd->Instance);
+ pSDstatus++;
+ count--;
+ }
+
+ /* Clear all the static status flags*/
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Gets the current sd card data status.
+ * @param hsd: SD handle
+ * @retval Data Transfer state
+ */
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_CardStateTypedef cardstate = SD_CARD_TRANSFER;
+
+ /* Get SD card state */
+ cardstate = SD_GetState(hsd);
+
+ /* Find SD status according to card state*/
+ if (cardstate == SD_CARD_TRANSFER)
+ {
+ return SD_TRANSFER_OK;
+ }
+ else if(cardstate == SD_CARD_ERROR)
+ {
+ return SD_TRANSFER_ERROR;
+ }
+ else
+ {
+ return SD_TRANSFER_BUSY;
+ }
+}
+
+/**
+ * @brief Gets the SD card status.
+ * @param hsd: SD handle
+ * @param pCardStatus: Pointer to the HAL_SD_CardStatusTypedef structure that
+ * will contain the SD card status information
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t tmp = 0U;
+ uint32_t sd_status[16U];
+
+ errorstate = HAL_SD_SendSDStatus(hsd, sd_status);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Byte 0 */
+ tmp = (sd_status[0U] & 0xC0U) >> 6U;
+ pCardStatus->DAT_BUS_WIDTH = (uint8_t)tmp;
+
+ /* Byte 0 */
+ tmp = (sd_status[0U] & 0x20U) >> 5U;
+ pCardStatus->SECURED_MODE = (uint8_t)tmp;
+
+ /* Byte 2 */
+ tmp = (sd_status[2U] & 0xFFU);
+ pCardStatus->SD_CARD_TYPE = (uint8_t)(tmp << 8U);
+
+ /* Byte 3 */
+ tmp = (sd_status[3U] & 0xFFU);
+ pCardStatus->SD_CARD_TYPE |= (uint8_t)tmp;
+
+ /* Byte 4 */
+ tmp = (sd_status[4U] & 0xFFU);
+ pCardStatus->SIZE_OF_PROTECTED_AREA = (uint8_t)(tmp << 24U);
+
+ /* Byte 5 */
+ tmp = (sd_status[5U] & 0xFFU);
+ pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 16U);
+
+ /* Byte 6 */
+ tmp = (sd_status[6U] & 0xFFU);
+ pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 8U);
+
+ /* Byte 7 */
+ tmp = (sd_status[7U] & 0xFFU);
+ pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)tmp;
+
+ /* Byte 8 */
+ tmp = (sd_status[8U] & 0xFFU);
+ pCardStatus->SPEED_CLASS = (uint8_t)tmp;
+
+ /* Byte 9 */
+ tmp = (sd_status[9U] & 0xFFU);
+ pCardStatus->PERFORMANCE_MOVE = (uint8_t)tmp;
+
+ /* Byte 10 */
+ tmp = (sd_status[10U] & 0xF0U) >> 4U;
+ pCardStatus->AU_SIZE = (uint8_t)tmp;
+
+ /* Byte 11 */
+ tmp = (sd_status[11U] & 0xFFU);
+ pCardStatus->ERASE_SIZE = (uint8_t)(tmp << 8U);
+
+ /* Byte 12 */
+ tmp = (sd_status[12U] & 0xFFU);
+ pCardStatus->ERASE_SIZE |= (uint8_t)tmp;
+
+ /* Byte 13 */
+ tmp = (sd_status[13U] & 0xFCU) >> 2U;
+ pCardStatus->ERASE_TIMEOUT = (uint8_t)tmp;
+
+ /* Byte 13 */
+ tmp = (sd_status[13U] & 0x3U);
+ pCardStatus->ERASE_OFFSET = (uint8_t)tmp;
+
+ return errorstate;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private function ----------------------------------------------------------*/
+/** @addtogroup SD_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief SD DMA transfer complete Rx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* DMA transfer is complete */
+ hsd->DmaTransferCplt = 1U;
+
+ /* Wait until SD transfer is complete */
+ while(hsd->SdTransferCplt == 0U)
+ {
+ }
+
+ /* Disable the DMA channel */
+ HAL_DMA_Abort(hdma);
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_RxCpltCallback(hsd->hdmarx);
+}
+
+/**
+ * @brief SD DMA transfer Error Rx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_RxErrorCallback(hsd->hdmarx);
+}
+
+/**
+ * @brief SD DMA transfer complete Tx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* DMA transfer is complete */
+ hsd->DmaTransferCplt = 1U;
+
+ /* Wait until SD transfer is complete */
+ while(hsd->SdTransferCplt == 0U)
+ {
+ }
+
+ /* Disable the DMA channel */
+ HAL_DMA_Abort(hdma);
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_TxCpltCallback(hsd->hdmatx);
+}
+
+/**
+ * @brief SD DMA transfer Error Tx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = ( SD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_TxErrorCallback(hsd->hdmatx);
+}
+
+/**
+ * @brief Returns the SD current state.
+ * @param hsd: SD handle
+ * @retval SD card current state
+ */
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd)
+{
+ uint32_t resp1 = 0U;
+
+ if (SD_SendStatus(hsd, &resp1) != SD_OK)
+ {
+ return SD_CARD_ERROR;
+ }
+ else
+ {
+ return (HAL_SD_CardStateTypedef)((resp1 >> 9U) & 0x0FU);
+ }
+}
+
+/**
+ * @brief Initializes all cards or single card as the case may be Card(s) come
+ * into standby state.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint16_t sd_rca = 1U;
+
+ if(SDIO_GetPowerState(hsd->Instance) == 0U) /* Power off */
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+
+ if(hsd->CardType != SECURE_DIGITAL_IO_CARD)
+ {
+ /* Send CMD2 ALL_SEND_CID */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_ALL_SEND_CID;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp2Error(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get Card identification number data */
+ hsd->CID[0U] = SDIO_GetResponse(SDIO_RESP1);
+ hsd->CID[1U] = SDIO_GetResponse(SDIO_RESP2);
+ hsd->CID[2U] = SDIO_GetResponse(SDIO_RESP3);
+ hsd->CID[3U] = SDIO_GetResponse(SDIO_RESP4);
+ }
+
+ if((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == SECURE_DIGITAL_IO_COMBO_CARD) || (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send CMD3 SET_REL_ADDR with argument 0 */
+ /* SD Card publishes its RCA. */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_REL_ADDR;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp6Error(hsd, SD_CMD_SET_REL_ADDR, &sd_rca);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+ }
+
+ if (hsd->CardType != SECURE_DIGITAL_IO_CARD)
+ {
+ /* Get the SD card RCA */
+ hsd->RCA = sd_rca;
+
+ /* Send CMD9 SEND_CSD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_CSD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp2Error(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get Card Specific Data */
+ hsd->CSD[0U] = SDIO_GetResponse(SDIO_RESP1);
+ hsd->CSD[1U] = SDIO_GetResponse(SDIO_RESP2);
+ hsd->CSD[2U] = SDIO_GetResponse(SDIO_RESP3);
+ hsd->CSD[3U] = SDIO_GetResponse(SDIO_RESP4);
+ }
+
+ /* All cards are initialized */
+ return errorstate;
+}
+
+/**
+ * @brief Selects of Deselects the corresponding card.
+ * @param hsd: SD handle
+ * @param addr: Address of the card to be selected
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Send CMD7 SDIO_SEL_DESEL_CARD */
+ sdio_cmdinitstructure.Argument = (uint32_t)addr;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEL_DESEL_CARD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEL_DESEL_CARD);
+
+ return errorstate;
+}
+
+/**
+ * @brief Enquires cards about their operating voltage and configures clock
+ * controls and stores SD information that will be needed in future
+ * in the SD handle.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t response = 0U, count = 0U, validvoltage = 0U;
+ uint32_t sdtype = SD_STD_CAPACITY;
+
+ /* Power ON Sequence -------------------------------------------------------*/
+ /* Disable SDIO Clock */
+ __HAL_SD_SDIO_DISABLE();
+
+ /* Set Power State to ON */
+ SDIO_PowerState_ON(hsd->Instance);
+
+ /* 1ms: required power up waiting time before starting the SD initialization
+ sequence */
+ HAL_Delay(1);
+
+ /* Enable SDIO Clock */
+ __HAL_SD_SDIO_ENABLE();
+
+ /* CMD0: GO_IDLE_STATE -----------------------------------------------------*/
+ /* No CMD response required */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_GO_IDLE_STATE;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_NO;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdError(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ /* CMD Response Timeout (wait for CMDSENT flag) */
+ return errorstate;
+ }
+
+ /* CMD8: SEND_IF_COND ------------------------------------------------------*/
+ /* Send CMD8 to verify SD card interface operating condition */
+ /* Argument: - [31:12]: Reserved (shall be set to '0')
+ - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V)
+ - [7:0]: Check Pattern (recommended 0xAA) */
+ /* CMD Response: R7 */
+ sdio_cmdinitstructure.Argument = SD_CHECK_PATTERN;
+ sdio_cmdinitstructure.CmdIndex = SD_SDIO_SEND_IF_COND;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp7Error(hsd);
+
+ if (errorstate == SD_OK)
+ {
+ /* SD Card 2.0 */
+ hsd->CardType = STD_CAPACITY_SD_CARD_V2_0;
+ sdtype = SD_HIGH_CAPACITY;
+ }
+
+ /* Send CMD55 */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ /* If errorstate is Command Timeout, it is a MMC card */
+ /* If errorstate is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch)
+ or SD card 1.x */
+ if(errorstate == SD_OK)
+ {
+ /* SD CARD */
+ /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */
+ while((!validvoltage) && (count < SD_MAX_VOLT_TRIAL))
+ {
+
+ /* SEND CMD55 APP_CMD with RCA as 0 */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD41 */
+ sdio_cmdinitstructure.Argument = SD_VOLTAGE_WINDOW_SD | sdtype;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_OP_COND;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp3Error(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get command response */
+ response = SDIO_GetResponse(SDIO_RESP1);
+
+ /* Get operating voltage*/
+ validvoltage = (((response >> 31U) == 1U) ? 1U : 0U);
+
+ count++;
+ }
+
+ if(count >= SD_MAX_VOLT_TRIAL)
+ {
+ errorstate = SD_INVALID_VOLTRANGE;
+
+ return errorstate;
+ }
+
+ if((response & SD_HIGH_CAPACITY) == SD_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */
+ {
+ hsd->CardType = HIGH_CAPACITY_SD_CARD;
+ }
+
+ } /* else MMC Card */
+
+ return errorstate;
+}
+
+/**
+ * @brief Turns the SDIO output signals off.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Set Power State to OFF */
+ SDIO_PowerState_OFF(hsd->Instance);
+
+ return errorstate;
+}
+
+/**
+ * @brief Returns the current card's status.
+ * @param hsd: SD handle
+ * @param pCardStatus: pointer to the buffer that will contain the SD card
+ * status (Card Status register)
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ if(pCardStatus == NULL)
+ {
+ errorstate = SD_INVALID_PARAMETER;
+
+ return errorstate;
+ }
+
+ /* Send Status command */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEND_STATUS);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get SD card status */
+ *pCardStatus = SDIO_GetResponse(SDIO_RESP1);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for CMD0.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t timeout, tmp;
+
+ timeout = SDIO_CMD0TIMEOUT;
+
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
+
+ while((timeout > 0U) && (!tmp))
+ {
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
+ timeout--;
+ }
+
+ if(timeout == 0U)
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R7 response.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_ERROR;
+ uint32_t timeout = SDIO_CMD0TIMEOUT, tmp;
+
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
+
+ while((!tmp) && (timeout > 0U))
+ {
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
+ timeout--;
+ }
+
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ if((timeout == 0U) || tmp)
+ {
+ /* Card is not V2.0 compliant or card does not support the set voltage range */
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDREND))
+ {
+ /* Card is SD V2.0 compliant */
+ errorstate = SD_OK;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CMDREND);
+
+ return errorstate;
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R1 response.
+ * @param hsd: SD handle
+ * @param SD_CMD: The sent command index
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t response_r1;
+
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+
+ /* Check response received is of desired command */
+ if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
+ {
+ errorstate = SD_ILLEGAL_CMD;
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* We have received response, retrieve it for analysis */
+ response_r1 = SDIO_GetResponse(SDIO_RESP1);
+
+ if((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+ {
+ return errorstate;
+ }
+
+ if((response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+ {
+ return(SD_ADDR_OUT_OF_RANGE);
+ }
+
+ if((response_r1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+ {
+ return(SD_ADDR_MISALIGNED);
+ }
+
+ if((response_r1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+ {
+ return(SD_BLOCK_LEN_ERR);
+ }
+
+ if((response_r1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+ {
+ return(SD_ERASE_SEQ_ERR);
+ }
+
+ if((response_r1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+ {
+ return(SD_BAD_ERASE_PARAM);
+ }
+
+ if((response_r1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+ {
+ return(SD_WRITE_PROT_VIOLATION);
+ }
+
+ if((response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+ {
+ return(SD_LOCK_UNLOCK_FAILED);
+ }
+
+ if((response_r1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+ {
+ return(SD_COM_CRC_FAILED);
+ }
+
+ if((response_r1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+ {
+ return(SD_ILLEGAL_CMD);
+ }
+
+ if((response_r1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+ {
+ return(SD_CARD_ECC_FAILED);
+ }
+
+ if((response_r1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+ {
+ return(SD_CC_ERROR);
+ }
+
+ if((response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+ {
+ return(SD_GENERAL_UNKNOWN_ERROR);
+ }
+
+ if((response_r1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+ {
+ return(SD_STREAM_READ_UNDERRUN);
+ }
+
+ if((response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+ {
+ return(SD_STREAM_WRITE_OVERRUN);
+ }
+
+ if((response_r1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+ {
+ return(SD_CID_CSD_OVERWRITE);
+ }
+
+ if((response_r1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+ {
+ return(SD_WP_ERASE_SKIP);
+ }
+
+ if((response_r1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+ {
+ return(SD_CARD_ECC_DISABLED);
+ }
+
+ if((response_r1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+ {
+ return(SD_ERASE_RESET);
+ }
+
+ if((response_r1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+ {
+ return(SD_AKE_SEQ_ERROR);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R3 (OCR) response.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R2 (CID or CSD) response.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R6 (RCA) response.
+ * @param hsd: SD handle
+ * @param SD_CMD: The sent command index
+ * @param pRCA: Pointer to the variable that will contain the SD card relative
+ * address RCA
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t response_r1;
+
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Check response received is of desired command */
+ if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
+ {
+ errorstate = SD_ILLEGAL_CMD;
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* We have received response, retrieve it. */
+ response_r1 = SDIO_GetResponse(SDIO_RESP1);
+
+ if((response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED)) == SD_ALLZERO)
+ {
+ *pRCA = (uint16_t) (response_r1 >> 16U);
+
+ return errorstate;
+ }
+
+ if((response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) == SD_R6_GENERAL_UNKNOWN_ERROR)
+ {
+ return(SD_GENERAL_UNKNOWN_ERROR);
+ }
+
+ if((response_r1 & SD_R6_ILLEGAL_CMD) == SD_R6_ILLEGAL_CMD)
+ {
+ return(SD_ILLEGAL_CMD);
+ }
+
+ if((response_r1 & SD_R6_COM_CRC_FAILED) == SD_R6_COM_CRC_FAILED)
+ {
+ return(SD_COM_CRC_FAILED);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Enables the SDIO wide bus mode.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ uint32_t scr[2U] = {0U, 0U};
+
+ if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, scr);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* If requested card supports wide bus operation */
+ if((scr[1U] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO)
+ {
+ /* Send CMD55 APP_CMD with argument as card's RCA.*/
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */
+ sdio_cmdinitstructure.Argument = 2U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ return errorstate;
+ }
+ else
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+}
+
+/**
+ * @brief Disables the SDIO wide bus mode.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ uint32_t scr[2U] = {0U, 0U};
+
+ if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, scr);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* If requested card supports 1 bit mode operation */
+ if((scr[1U] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO)
+ {
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ return errorstate;
+ }
+ else
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+}
+
+
+/**
+ * @brief Finds the SD card SCR register value.
+ * @param hsd: SD handle
+ * @param pSCR: pointer to the buffer that will contain the SCR value
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t index = 0U;
+ uint32_t tempscr[2U] = {0U, 0U};
+
+ /* Set Block Size To 8 Bytes */
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)8U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)((hsd->RCA) << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = 8U;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_8B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */
+ sdio_cmdinitstructure.Argument = 0U;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_SEND_SCR;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_SEND_SCR);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL))
+ {
+ *(tempscr + index) = SDIO_ReadFIFO(hsd->Instance);
+ index++;
+ }
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ *(pSCR + 1U) = ((tempscr[0U] & SD_0TO7BITS) << 24U) | ((tempscr[0U] & SD_8TO15BITS) << 8U) |\
+ ((tempscr[0U] & SD_16TO23BITS) >> 8U) | ((tempscr[0U] & SD_24TO31BITS) >> 24U);
+
+ *(pSCR) = ((tempscr[1U] & SD_0TO7BITS) << 24U) | ((tempscr[1U] & SD_8TO15BITS) << 8U) |\
+ ((tempscr[1U] & SD_16TO23BITS) >> 8U) | ((tempscr[1U] & SD_24TO31BITS) >> 24U);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks if the SD card is in programming state.
+ * @param hsd: SD handle
+ * @param pStatus: pointer to the variable that will contain the SD card state
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ __IO uint32_t responseR1 = 0U;
+
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16U);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Check response received is of desired command */
+ if((uint32_t)SDIO_GetCommandResponse(hsd->Instance) != SD_CMD_SEND_STATUS)
+ {
+ errorstate = SD_ILLEGAL_CMD;
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+
+ /* We have received response, retrieve it for analysis */
+ responseR1 = SDIO_GetResponse(SDIO_RESP1);
+
+ /* Find out card status */
+ *pStatus = (uint8_t)((responseR1 >> 9U) & 0x0000000FU);
+
+ if((responseR1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+ {
+ return errorstate;
+ }
+
+ if((responseR1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+ {
+ return(SD_ADDR_OUT_OF_RANGE);
+ }
+
+ if((responseR1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+ {
+ return(SD_ADDR_MISALIGNED);
+ }
+
+ if((responseR1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+ {
+ return(SD_BLOCK_LEN_ERR);
+ }
+
+ if((responseR1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+ {
+ return(SD_ERASE_SEQ_ERR);
+ }
+
+ if((responseR1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+ {
+ return(SD_BAD_ERASE_PARAM);
+ }
+
+ if((responseR1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+ {
+ return(SD_WRITE_PROT_VIOLATION);
+ }
+
+ if((responseR1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+ {
+ return(SD_LOCK_UNLOCK_FAILED);
+ }
+
+ if((responseR1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+ {
+ return(SD_COM_CRC_FAILED);
+ }
+
+ if((responseR1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+ {
+ return(SD_ILLEGAL_CMD);
+ }
+
+ if((responseR1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+ {
+ return(SD_CARD_ECC_FAILED);
+ }
+
+ if((responseR1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+ {
+ return(SD_CC_ERROR);
+ }
+
+ if((responseR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+ {
+ return(SD_GENERAL_UNKNOWN_ERROR);
+ }
+
+ if((responseR1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+ {
+ return(SD_STREAM_READ_UNDERRUN);
+ }
+
+ if((responseR1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+ {
+ return(SD_STREAM_WRITE_OVERRUN);
+ }
+
+ if((responseR1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+ {
+ return(SD_CID_CSD_OVERWRITE);
+ }
+
+ if((responseR1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+ {
+ return(SD_WP_ERASE_SKIP);
+ }
+
+ if((responseR1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+ {
+ return(SD_CARD_ECC_DISABLED);
+ }
+
+ if((responseR1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+ {
+ return(SD_ERASE_RESET);
+ }
+
+ if((responseR1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+ {
+ return(SD_AKE_SEQ_ERROR);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#endif /* HAL_SD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sd.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,795 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sd.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SD_H
+#define __STM32F4xx_HAL_SD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_sdmmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SD SD
+ * @brief SD HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SD_Exported_Types SD Exported Types
+ * @{
+ */
+
+/** @defgroup SD_Exported_Types_Group1 SD Handle Structure definition
+ * @{
+ */
+#define SD_InitTypeDef SDIO_InitTypeDef
+#define SD_TypeDef SDIO_TypeDef
+
+typedef struct
+{
+ SD_TypeDef *Instance; /*!< SDIO register base address */
+
+ SD_InitTypeDef Init; /*!< SD required parameters */
+
+ HAL_LockTypeDef Lock; /*!< SD locking object */
+
+ uint32_t CardType; /*!< SD card type */
+
+ uint32_t RCA; /*!< SD relative card address */
+
+ uint32_t CSD[4]; /*!< SD card specific data table */
+
+ uint32_t CID[4]; /*!< SD card identification number table */
+
+ __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */
+
+ __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */
+
+ __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */
+
+ __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
+
+}SD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group2 Card Specific Data: CSD Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t CSDStruct; /*!< CSD structure */
+ __IO uint8_t SysSpecVersion; /*!< System specification version */
+ __IO uint8_t Reserved1; /*!< Reserved */
+ __IO uint8_t TAAC; /*!< Data read access time 1 */
+ __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
+ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
+ __IO uint16_t CardComdClasses; /*!< Card command classes */
+ __IO uint8_t RdBlockLen; /*!< Max. read data block length */
+ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
+ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
+ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
+ __IO uint8_t DSRImpl; /*!< DSR implemented */
+ __IO uint8_t Reserved2; /*!< Reserved */
+ __IO uint32_t DeviceSize; /*!< Device Size */
+ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
+ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
+ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
+ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
+ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
+ __IO uint8_t EraseGrSize; /*!< Erase group size */
+ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
+ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
+ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
+ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
+ __IO uint8_t WrSpeedFact; /*!< Write speed factor */
+ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
+ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
+ __IO uint8_t Reserved3; /*!< Reserved */
+ __IO uint8_t ContentProtectAppli; /*!< Content protection application */
+ __IO uint8_t FileFormatGrouop; /*!< File format group */
+ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
+ __IO uint8_t PermWrProtect; /*!< Permanent write protection */
+ __IO uint8_t TempWrProtect; /*!< Temporary write protection */
+ __IO uint8_t FileFormat; /*!< File format */
+ __IO uint8_t ECC; /*!< ECC code */
+ __IO uint8_t CSD_CRC; /*!< CSD CRC */
+ __IO uint8_t Reserved4; /*!< Always 1 */
+
+}HAL_SD_CSDTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group3 Card Identification Data: CID Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
+ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
+ __IO uint32_t ProdName1; /*!< Product Name part1 */
+ __IO uint8_t ProdName2; /*!< Product Name part2 */
+ __IO uint8_t ProdRev; /*!< Product Revision */
+ __IO uint32_t ProdSN; /*!< Product Serial Number */
+ __IO uint8_t Reserved1; /*!< Reserved1 */
+ __IO uint16_t ManufactDate; /*!< Manufacturing Date */
+ __IO uint8_t CID_CRC; /*!< CID CRC */
+ __IO uint8_t Reserved2; /*!< Always 1 */
+
+}HAL_SD_CIDTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group4 SD Card Status returned by ACMD13
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */
+ __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */
+ __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */
+ __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */
+ __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */
+ __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */
+ __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */
+ __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */
+ __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */
+ __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */
+
+}HAL_SD_CardStatusTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group5 SD Card information structure
+ * @{
+ */
+typedef struct
+{
+ HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */
+ HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */
+ uint64_t CardCapacity; /*!< Card capacity */
+ uint32_t CardBlockSize; /*!< Card block size */
+ uint16_t RCA; /*!< SD relative card address */
+ uint8_t CardType; /*!< SD card type */
+
+}HAL_SD_CardInfoTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group6 SD Error status enumeration Structure definition
+ * @{
+ */
+typedef enum
+{
+/**
+ * @brief SD specific error defines
+ */
+ SD_CMD_CRC_FAIL = (1U), /*!< Command response received (but CRC check failed) */
+ SD_DATA_CRC_FAIL = (2U), /*!< Data block sent/received (CRC check failed) */
+ SD_CMD_RSP_TIMEOUT = (3U), /*!< Command response timeout */
+ SD_DATA_TIMEOUT = (4U), /*!< Data timeout */
+ SD_TX_UNDERRUN = (5U), /*!< Transmit FIFO underrun */
+ SD_RX_OVERRUN = (6U), /*!< Receive FIFO overrun */
+ SD_START_BIT_ERR = (7U), /*!< Start bit not detected on all data signals in wide bus mode */
+ SD_CMD_OUT_OF_RANGE = (8U), /*!< Command's argument was out of range. */
+ SD_ADDR_MISALIGNED = (9U), /*!< Misaligned address */
+ SD_BLOCK_LEN_ERR = (10U), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
+ SD_ERASE_SEQ_ERR = (11U), /*!< An error in the sequence of erase command occurs. */
+ SD_BAD_ERASE_PARAM = (12U), /*!< An invalid selection for erase groups */
+ SD_WRITE_PROT_VIOLATION = (13U), /*!< Attempt to program a write protect block */
+ SD_LOCK_UNLOCK_FAILED = (14U), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
+ SD_COM_CRC_FAILED = (15U), /*!< CRC check of the previous command failed */
+ SD_ILLEGAL_CMD = (16U), /*!< Command is not legal for the card state */
+ SD_CARD_ECC_FAILED = (17U), /*!< Card internal ECC was applied but failed to correct the data */
+ SD_CC_ERROR = (18U), /*!< Internal card controller error */
+ SD_GENERAL_UNKNOWN_ERROR = (19U), /*!< General or unknown error */
+ SD_STREAM_READ_UNDERRUN = (20U), /*!< The card could not sustain data transfer in stream read operation. */
+ SD_STREAM_WRITE_OVERRUN = (21U), /*!< The card could not sustain data programming in stream mode */
+ SD_CID_CSD_OVERWRITE = (22U), /*!< CID/CSD overwrite error */
+ SD_WP_ERASE_SKIP = (23U), /*!< Only partial address space was erased */
+ SD_CARD_ECC_DISABLED = (24U), /*!< Command has been executed without using internal ECC */
+ SD_ERASE_RESET = (25U), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
+ SD_AKE_SEQ_ERROR = (26U), /*!< Error in sequence of authentication. */
+ SD_INVALID_VOLTRANGE = (27U),
+ SD_ADDR_OUT_OF_RANGE = (28U),
+ SD_SWITCH_ERROR = (29U),
+ SD_SDIO_DISABLED = (30U),
+ SD_SDIO_FUNCTION_BUSY = (31U),
+ SD_SDIO_FUNCTION_FAILED = (32U),
+ SD_SDIO_UNKNOWN_FUNCTION = (33U),
+
+/**
+ * @brief Standard error defines
+ */
+ SD_INTERNAL_ERROR = (34U),
+ SD_NOT_CONFIGURED = (35U),
+ SD_REQUEST_PENDING = (36U),
+ SD_REQUEST_NOT_APPLICABLE = (37U),
+ SD_INVALID_PARAMETER = (38U),
+ SD_UNSUPPORTED_FEATURE = (39U),
+ SD_UNSUPPORTED_HW = (40U),
+ SD_ERROR = (41U),
+ SD_OK = (0U)
+
+}HAL_SD_ErrorTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group7 SD Transfer state enumeration structure
+ * @{
+ */
+typedef enum
+{
+ SD_TRANSFER_OK = 0U, /*!< Transfer success */
+ SD_TRANSFER_BUSY = 1U, /*!< Transfer is occurring */
+ SD_TRANSFER_ERROR = 2U /*!< Transfer failed */
+
+}HAL_SD_TransferStateTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group8 SD Card State enumeration structure
+ * @{
+ */
+typedef enum
+{
+ SD_CARD_READY = ((uint32_t)0x00000001U), /*!< Card state is ready */
+ SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002U), /*!< Card is in identification state */
+ SD_CARD_STANDBY = ((uint32_t)0x00000003U), /*!< Card is in standby state */
+ SD_CARD_TRANSFER = ((uint32_t)0x00000004U), /*!< Card is in transfer state */
+ SD_CARD_SENDING = ((uint32_t)0x00000005U), /*!< Card is sending an operation */
+ SD_CARD_RECEIVING = ((uint32_t)0x00000006U), /*!< Card is receiving operation information */
+ SD_CARD_PROGRAMMING = ((uint32_t)0x00000007U), /*!< Card is in programming state */
+ SD_CARD_DISCONNECTED = ((uint32_t)0x00000008U), /*!< Card is disconnected */
+ SD_CARD_ERROR = ((uint32_t)0x000000FFU) /*!< Card is in error state */
+
+}HAL_SD_CardStateTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group9 SD Operation enumeration structure
+ * @{
+ */
+typedef enum
+{
+ SD_READ_SINGLE_BLOCK = 0U, /*!< Read single block operation */
+ SD_READ_MULTIPLE_BLOCK = 1U, /*!< Read multiple blocks operation */
+ SD_WRITE_SINGLE_BLOCK = 2U, /*!< Write single block operation */
+ SD_WRITE_MULTIPLE_BLOCK = 3U /*!< Write multiple blocks operation */
+
+}HAL_SD_OperationTypedef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SD_Exported_Constants SD Exported Constants
+ * @{
+ */
+
+/**
+ * @brief SD Commands Index
+ */
+#define SD_CMD_GO_IDLE_STATE ((uint8_t)0U) /*!< Resets the SD memory card. */
+#define SD_CMD_SEND_OP_COND ((uint8_t)1U) /*!< Sends host capacity support information and activates the card's initialization process. */
+#define SD_CMD_ALL_SEND_CID ((uint8_t)2U) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
+#define SD_CMD_SET_REL_ADDR ((uint8_t)3U) /*!< Asks the card to publish a new relative address (RCA). */
+#define SD_CMD_SET_DSR ((uint8_t)4U) /*!< Programs the DSR of all cards. */
+#define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5U) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
+ operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_HS_SWITCH ((uint8_t)6U) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
+#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7U) /*!< Selects the card by its own relative address and gets deselected by any other address */
+#define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8U) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
+ and asks the card whether card supports voltage. */
+#define SD_CMD_SEND_CSD ((uint8_t)9U) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
+#define SD_CMD_SEND_CID ((uint8_t)10U) /*!< Addressed card sends its card identification (CID) on the CMD line. */
+#define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11U) /*!< SD card doesn't support it. */
+#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12U) /*!< Forces the card to stop transmission. */
+#define SD_CMD_SEND_STATUS ((uint8_t)13U) /*!< Addressed card sends its status register. */
+#define SD_CMD_HS_BUSTEST_READ ((uint8_t)14U)
+#define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15U) /*!< Sends an addressed card into the inactive state. */
+#define SD_CMD_SET_BLOCKLEN ((uint8_t)16U) /*!< Sets the block length (in bytes for SDSC) for all following block commands
+ (read, write, lock). Default block length is fixed to 512 Bytes. Not effective
+ for SDHS and SDXC. */
+#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17U) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18U) /*!< Continuously transfers data blocks from card to host until interrupted by
+ STOP_TRANSMISSION command. */
+#define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19U) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
+#define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20U) /*!< Speed class control command. */
+#define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23U) /*!< Specify block count for CMD18 and CMD25. */
+#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24U) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25U) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
+#define SD_CMD_PROG_CID ((uint8_t)26U) /*!< Reserved for manufacturers. */
+#define SD_CMD_PROG_CSD ((uint8_t)27U) /*!< Programming of the programmable bits of the CSD. */
+#define SD_CMD_SET_WRITE_PROT ((uint8_t)28U) /*!< Sets the write protection bit of the addressed group. */
+#define SD_CMD_CLR_WRITE_PROT ((uint8_t)29U) /*!< Clears the write protection bit of the addressed group. */
+#define SD_CMD_SEND_WRITE_PROT ((uint8_t)30U) /*!< Asks the card to send the status of the write protection bits. */
+#define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32U) /*!< Sets the address of the first write block to be erased. (For SD card only). */
+#define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33U) /*!< Sets the address of the last write block of the continuous range to be erased. */
+#define SD_CMD_ERASE_GRP_START ((uint8_t)35U) /*!< Sets the address of the first write block to be erased. Reserved for each command
+ system set by switch function command (CMD6). */
+#define SD_CMD_ERASE_GRP_END ((uint8_t)36U) /*!< Sets the address of the last write block of the continuous range to be erased.
+ Reserved for each command system set by switch function command (CMD6). */
+#define SD_CMD_ERASE ((uint8_t)38U) /*!< Reserved for SD security applications. */
+#define SD_CMD_FAST_IO ((uint8_t)39U) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_GO_IRQ_STATE ((uint8_t)40U) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_LOCK_UNLOCK ((uint8_t)42U) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
+ the SET_BLOCK_LEN command. */
+#define SD_CMD_APP_CMD ((uint8_t)55U) /*!< Indicates to the card that the next command is an application specific command rather
+ than a standard command. */
+#define SD_CMD_GEN_CMD ((uint8_t)56U) /*!< Used either to transfer a data block to the card or to get a data block from the card
+ for general purpose/application specific commands. */
+#define SD_CMD_NO_CMD ((uint8_t)64U)
+
+/**
+ * @brief Following commands are SD Card Specific commands.
+ * SDIO_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6U) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
+ widths are given in SCR register. */
+#define SD_CMD_SD_APP_STATUS ((uint8_t)13U) /*!< (ACMD13) Sends the SD status. */
+#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22U) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
+ 32bit+CRC data block. */
+#define SD_CMD_SD_APP_OP_COND ((uint8_t)41U) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
+ send its operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42U) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */
+#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51U) /*!< Reads the SD Configuration Register (SCR). */
+#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52U) /*!< For SD I/O card only, reserved for security specification. */
+#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53U) /*!< For SD I/O card only, reserved for security specification. */
+
+/**
+ * @brief Following commands are SD Card Specific security commands.
+ * SD_CMD_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_SD_APP_GET_MKB ((uint8_t)43U) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_MID ((uint8_t)44U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45U) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47U) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38U) /*!< For SD card only */
+#define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49U) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48U) /*!< For SD card only */
+
+/**
+ * @brief Supported SD Memory Cards
+ */
+#define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000U)
+#define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001U)
+#define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002U)
+#define MULTIMEDIA_CARD ((uint32_t)0x00000003U)
+#define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004U)
+#define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005U)
+#define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006U)
+#define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007U)
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SD_Exported_macros SD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE()
+
+/**
+ * @brief Disable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE()
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE()
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE()
+
+/**
+ * @brief Enable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Disable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified SD flag is set or not.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SD FLAG (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Clear the SD's pending flags.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Check whether the specified SD interrupt has occurred or not.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SD IT (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__)
+
+/**
+ * @brief Clear the SD's interrupt pending bits.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SD_Exported_Functions SD Exported Functions
+ * @{
+ */
+
+/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
+HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group2 I/O operation functions
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
+
+/* Non-Blocking mode: DMA */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo);
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode);
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd);
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @defgroup SD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus);
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup SD_Private_Types SD Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SD_Private_Defines SD Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup SD_Private_Variables SD Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SD_Private_Constants SD Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SD_Private_Macros SD Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SD_Private_Functions SD Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,853 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sdram.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SDRAM HAL module driver.
+ * This file provides a generic firmware to drive SDRAM memories mounted
+ * as external device.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control SDRAM memories. It uses the FMC layer functions to interface
+ with SDRAM devices.
+ The following sequence should be followed to configure the FMC to interface
+ with SDRAM memories:
+
+ (#) Declare a SDRAM_HandleTypeDef handle structure, for example:
+ SDRAM_HandleTypeDef hdsram
+
+ (++) Fill the SDRAM_HandleTypeDef handle "Init" field with the allowed
+ values of the structure member.
+
+ (++) Fill the SDRAM_HandleTypeDef handle "Instance" field with a predefined
+ base register instance for NOR or SDRAM device
+
+ (#) Declare a FMC_SDRAM_TimingTypeDef structure; for example:
+ FMC_SDRAM_TimingTypeDef Timing;
+ and fill its fields with the allowed values of the structure member.
+
+ (#) Initialize the SDRAM Controller by calling the function HAL_SDRAM_Init(). This function
+ performs the following sequence:
+
+ (##) MSP hardware layer configuration using the function HAL_SDRAM_MspInit()
+ (##) Control register configuration using the FMC SDRAM interface function
+ FMC_SDRAM_Init()
+ (##) Timing register configuration using the FMC SDRAM interface function
+ FMC_SDRAM_Timing_Init()
+ (##) Program the SDRAM external device by applying its initialization sequence
+ according to the device plugged in your hardware. This step is mandatory
+ for accessing the SDRAM device.
+
+ (#) At this stage you can perform read/write accesses from/to the memory connected
+ to the SDRAM Bank. You can perform either polling or DMA transfer using the
+ following APIs:
+ (++) HAL_SDRAM_Read()/HAL_SDRAM_Write() for polling read/write access
+ (++) HAL_SDRAM_Read_DMA()/HAL_SDRAM_Write_DMA() for DMA read/write transfer
+
+ (#) You can also control the SDRAM device by calling the control APIs HAL_SDRAM_WriteOperation_Enable()/
+ HAL_SDRAM_WriteOperation_Disable() to respectively enable/disable the SDRAM write operation or
+ the function HAL_SDRAM_SendCommand() to send a specified command to the SDRAM
+ device. The command to be sent must be configured with the FMC_SDRAM_CommandTypeDef
+ structure.
+
+ (#) You can continuously monitor the SDRAM device HAL state by calling the function
+ HAL_SDRAM_GetState()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SDRAM SDRAM
+ * @brief SDRAM driver modules
+ * @{
+ */
+#ifdef HAL_SDRAM_MODULE_ENABLED
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Functions SDRAM Exported Functions
+ * @{
+ */
+
+/** @defgroup SDRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SDRAM Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize
+ the SDRAM memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Performs the SDRAM device initialization sequence.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param Timing: Pointer to SDRAM control timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing)
+{
+ /* Check the SDRAM handle parameter */
+ if(hsdram == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsdram->State == HAL_SDRAM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hsdram->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_SDRAM_MspInit(hsdram);
+ }
+
+ /* Initialize the SDRAM controller state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Initialize SDRAM control Interface */
+ FMC_SDRAM_Init(hsdram->Instance, &(hsdram->Init));
+
+ /* Initialize SDRAM timing Interface */
+ FMC_SDRAM_Timing_Init(hsdram->Instance, Timing, hsdram->Init.SDBank);
+
+ /* Update the SDRAM controller state */
+ hsdram->State = HAL_SDRAM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Perform the SDRAM device initialization sequence.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Initialize the low level hardware (MSP) */
+ HAL_SDRAM_MspDeInit(hsdram);
+
+ /* Configure the SDRAM registers with their reset values */
+ FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank);
+
+ /* Reset the SDRAM controller state */
+ hsdram->State = HAL_SDRAM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SDRAM MSP Init.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval None
+ */
+__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsdram);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SDRAM MSP DeInit.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval None
+ */
+__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsdram);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles SDRAM refresh error interrupt request.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL status
+*/
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Check SDRAM interrupt Rising edge flag */
+ if(__FMC_SDRAM_GET_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_IT))
+ {
+ /* SDRAM refresh error interrupt callback */
+ HAL_SDRAM_RefreshErrorCallback(hsdram);
+
+ /* Clear SDRAM refresh error interrupt pending bit */
+ __FMC_SDRAM_CLEAR_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_ERROR);
+ }
+}
+
+/**
+ * @brief SDRAM Refresh error callback.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval None
+ */
+__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsdram);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_RefreshErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_DMA_XferCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA transfer complete error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+__weak void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_SDRAM_DMA_XferErrorCallback could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup SDRAM_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SDRAM Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the SDRAM memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads 8-bit data buffer from the SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Read data from source */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint8_t *)pSdramAddress;
+ pDstBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 8-bit data buffer to SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint8_t *)pSdramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads 16-bit data buffer from the SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Read data from source */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint16_t *)pSdramAddress;
+ pDstBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 16-bit data buffer to SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint16_t *)pSdramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads 32-bit data buffer from the SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Read data from source */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint32_t *)pSdramAddress;
+ pDstBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 32-bit data buffer to SDRAM memory.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint32_t *)pSdramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSdramAddress++;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads a Words data from the SDRAM memory using DMA transfer.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if(tmp == HAL_SDRAM_STATE_PRECHARGED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Configure DMA user callbacks */
+ hsdram->hdma->XferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback;
+ hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes a Words data buffer to SDRAM memory using DMA transfer.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+ uint32_t tmp = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hsdram);
+
+ /* Check the SDRAM controller state */
+ tmp = hsdram->State;
+
+ if(tmp == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Configure DMA user callbacks */
+ hsdram->hdma->XferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback;
+ hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsdram);
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup SDRAM_Exported_Functions_Group3 Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### SDRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the SDRAM interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically SDRAM write protection.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Enable write protection */
+ FMC_SDRAM_WriteProtection_Enable(hsdram->Instance, hsdram->Init.SDBank);
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically SDRAM write protection.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Disable write protection */
+ FMC_SDRAM_WriteProtection_Disable(hsdram->Instance, hsdram->Init.SDBank);
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sends Command to the SDRAM bank.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param Command: SDRAM command structure
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Send SDRAM command */
+ FMC_SDRAM_SendCommand(hsdram->Instance, Command, Timeout);
+
+ /* Update the SDRAM controller state */
+ if(Command->CommandMode == FMC_SDRAM_CMD_PALL)
+ {
+ hsdram->State = HAL_SDRAM_STATE_PRECHARGED;
+ }
+ else
+ {
+ hsdram->State = HAL_SDRAM_STATE_READY;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Programs the SDRAM Memory Refresh rate.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param RefreshRate: The SDRAM refresh rate value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Program the refresh rate */
+ FMC_SDRAM_ProgramRefreshRate(hsdram->Instance ,RefreshRate);
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets the Number of consecutive SDRAM Memory auto Refresh commands.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @param AutoRefreshNumber: The SDRAM auto Refresh number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber)
+{
+ /* Check the SDRAM controller state */
+ if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+ /* Set the Auto-Refresh number */
+ FMC_SDRAM_SetAutoRefreshNumber(hsdram->Instance ,AutoRefreshNumber);
+
+ /* Update the SDRAM state */
+ hsdram->State = HAL_SDRAM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the SDRAM memory current mode.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval The SDRAM memory mode.
+ */
+uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram)
+{
+ /* Return the SDRAM memory current mode */
+ return(FMC_SDRAM_GetModeStatus(hsdram->Instance, hsdram->Init.SDBank));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SDRAM_Exported_Functions_Group4 State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### SDRAM State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the SDRAM controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the SDRAM state.
+ * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+ * the configuration information for SDRAM module.
+ * @retval HAL state
+ */
+HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram)
+{
+ return hsdram->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sdram.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,197 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sdram.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SDRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SDRAM_H
+#define __STM32F4xx_HAL_SDRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_fmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SDRAM
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Types SDRAM Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL SDRAM State structure definition
+ */
+typedef enum
+{
+ HAL_SDRAM_STATE_RESET = 0x00U, /*!< SDRAM not yet initialized or disabled */
+ HAL_SDRAM_STATE_READY = 0x01U, /*!< SDRAM initialized and ready for use */
+ HAL_SDRAM_STATE_BUSY = 0x02U, /*!< SDRAM internal process is ongoing */
+ HAL_SDRAM_STATE_ERROR = 0x03U, /*!< SDRAM error state */
+ HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04U, /*!< SDRAM device write protected */
+ HAL_SDRAM_STATE_PRECHARGED = 0x05U /*!< SDRAM device precharged */
+
+}HAL_SDRAM_StateTypeDef;
+
+/**
+ * @brief SDRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_SDRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */
+
+ __IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */
+
+ HAL_LockTypeDef Lock; /*!< SDRAM locking object */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SDRAM_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros
+ * @{
+ */
+
+/** @brief Reset SDRAM handle state
+ * @param __HANDLE__: specifies the SDRAM handle.
+ * @retval None
+ */
+#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions
+ * @{
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
+
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t * pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+/**
+ * @}
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group3
+ * @{
+ */
+/* SDRAM Control functions *****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate);
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber);
+uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram);
+/**
+ * @}
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group4
+ * @{
+ */
+/* SDRAM State functions ********************************************************/
+HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SDRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1333 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_smartcard.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SMARTCARD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the SMARTCARD peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The SMARTCARD HAL driver can be used as follows:
+
+ (#) Declare a SMARTCARD_HandleTypeDef handle structure.
+ (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API:
+ (##) Enable the USARTx interface clock.
+ (##) SMARTCARD pins configuration:
+ (+++) Enable the clock for the SMARTCARD GPIOs.
+ (+++) Configure these SMARTCARD pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
+ and HAL_SMARTCARD_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
+ and HAL_SMARTCARD_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+ (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware
+ flow control and Mode(Receiver/Transmitter) in the SMARTCARD Init structure.
+
+ (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API:
+ (++) These APIs configure also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customized HAL_SMARTCARD_MspInit() API.
+ [..]
+ (@) The specific SMARTCARD interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
+
+ [..]
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_SMARTCARD_Transmit_IT()
+ (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_SMARTCARD_Receive_IT()
+ (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
+ (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA()
+ (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA()
+ (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
+ (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
+
+ *** SMARTCARD HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in SMARTCARD HAL driver.
+
+ (+) __HAL_SMARTCARD_ENABLE: Enable the SMARTCARD peripheral
+ (+) __HAL_SMARTCARD_DISABLE: Disable the SMARTCARD peripheral
+ (+) __HAL_SMARTCARD_GET_FLAG : Check whether the specified SMARTCARD flag is set or not
+ (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
+ (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
+ (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
+
+ [..]
+ (@) You can refer to the SMARTCARD HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SMARTCARD SMARTCARD
+ * @brief HAL USART SMARTCARD module driver
+ * @{
+ */
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Private_Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SMARTCARD_Private_Functions
+ * @{
+ */
+static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsc);
+static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsc);
+static void SMARTCARD_SetConfig (SMARTCARD_HandleTypeDef *hsc);
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc);
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc);
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group1 SmartCard Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USART
+ in Smartcard mode.
+ [..]
+ The Smartcard interface is designed to support asynchronous protocol Smartcards as
+ defined in the ISO 7816-3 standard.
+ [..]
+ The USART can provide a clock to the smartcard through the SCLK output.
+ In smartcard mode, SCLK is not associated to the communication but is simply derived
+ from the internal peripheral input clock through a 5-bit prescaler.
+ [..]
+ (+) For the Smartcard mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length => Should be 9 bits (8 bits + parity)
+ (++) Stop Bit
+ (++) Parity: => Should be enabled
+
+ (+++) +-------------------------------------------------------------+
+ (+++) | M bit | PCE bit | SMARTCARD frame |
+ (+++) |---------------------|---------------------------------------|
+ (+++) | 1 | 1 | | SB | 8 bit data | PB | STB | |
+ (+++) +-------------------------------------------------------------+
+
+ (++) USART polarity
+ (++) USART phase
+ (++) USART LastBit
+ (++) Receiver/transmitter modes
+ (++) Prescaler
+ (++) GuardTime
+ (++) NACKState: The Smartcard NACK state
+
+ (+) Recommended SmartCard interface configuration to get the Answer to Reset from the Card:
+ (++) Word Length = 9 Bits
+ (++) 1.5 Stop Bit
+ (++) Even parity
+ (++) BaudRate = 12096 baud
+ (++) Tx and Rx enabled
+ [..]
+ Please refer to the ISO 7816-3 specification for more details.
+
+ -@- It is also possible to choose 0.5 stop bit for receiving but it is recommended
+ to use 1.5 stop bits for both transmitting and receiving to avoid switching
+ between the two configurations.
+ [..]
+ The HAL_SMARTCARD_Init() function follows the USART SmartCard configuration
+ procedure (details for the procedure are available in reference manual (RM0329)).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SmartCard mode according to the specified
+ * parameters in the SMARTCARD_InitTypeDef and create the associated handle .
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Check the SMARTCARD handle allocation */
+ if(hsc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+ assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));
+
+ if(hsc->gState == HAL_SMARTCARD_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hsc->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_SMARTCARD_MspInit(hsc);
+ }
+
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY;
+
+ /* Set the Prescaler */
+ MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_PSC, hsc->Init.Prescaler);
+
+ /* Set the Guard Time */
+ MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_GT, ((hsc->Init.GuardTime)<<8));
+
+ /* Set the Smartcard Communication parameters */
+ SMARTCARD_SetConfig(hsc);
+
+ /* In SmartCard mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register
+ - HDSEL and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(hsc->Instance->CR2, USART_CR2_LINEN);
+ CLEAR_BIT(hsc->Instance->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
+
+ /* Enable the SMARTCARD Parity Error Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the SMARTCARD Framing Error Interrupt */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the Peripheral */
+ __HAL_SMARTCARD_ENABLE(hsc);
+
+ /* Configure the Smartcard NACK state */
+ MODIFY_REG(hsc->Instance->CR3, USART_CR3_NACK, hsc->Init.NACKState);
+
+ /* Enable the SC mode by setting the SCEN bit in the CR3 register */
+ hsc->Instance->CR3 |= (USART_CR3_SCEN);
+
+ /* Initialize the SMARTCARD state*/
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState= HAL_SMARTCARD_STATE_READY;
+ hsc->RxState= HAL_SMARTCARD_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the USART SmartCard peripheral
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Check the SMARTCARD handle allocation */
+ if(hsc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_SMARTCARD_DISABLE(hsc);
+
+ /* DeInit the low level hardware */
+ HAL_SMARTCARD_MspDeInit(hsc);
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState = HAL_SMARTCARD_STATE_RESET;
+ hsc->RxState = HAL_SMARTCARD_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SMARTCARD MSP Init
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SMARTCARD MSP DeInit
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions
+ * @brief SMARTCARD Transmit and Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
+ [..]
+ Smartcard is a single wire half duplex communication protocol.
+ The Smartcard interface is designed to support asynchronous protocol Smartcards as
+ defined in the ISO 7816-3 standard. The USART should be configured as:
+ (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
+ (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) Non Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
+ will be executed respectively at the end of the Transmit or Receive process
+ The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication error is detected
+
+ (#) Blocking mode APIs are :
+ (++) HAL_SMARTCARD_Transmit()
+ (++) HAL_SMARTCARD_Receive()
+
+ (#) Non Blocking mode APIs with Interrupt are :
+ (++) HAL_SMARTCARD_Transmit_IT()
+ (++) HAL_SMARTCARD_Receive_IT()
+ (++) HAL_SMARTCARD_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_SMARTCARD_Transmit_DMA()
+ (++) HAL_SMARTCARD_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_SMARTCARD_TxCpltCallback()
+ (++) HAL_SMARTCARD_RxCpltCallback()
+ (++) HAL_SMARTCARD_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send an amount of data in blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(hsc->gState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY_TX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ hsc->TxXferSize = Size;
+ hsc->TxXferCount = Size;
+ while(hsc->TxXferCount > 0U)
+ {
+ hsc->TxXferCount--;
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ hsc->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ pData +=1U;
+ }
+
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* At end of Tx process, restore hsc->gState to Ready */
+ hsc->gState = HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(hsc->RxState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ hsc->RxXferSize = Size;
+ hsc->RxXferCount = Size;
+
+ /* Check the remain data to be received */
+ while(hsc->RxXferCount > 0U)
+ {
+ hsc->RxXferCount--;
+ if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ *tmp = (uint8_t)(hsc->Instance->DR & (uint8_t)0xFFU);
+ pData +=1U;
+ }
+
+ /* At end of Rx process, restore hsc->RxState to Ready */
+ hsc->RxState = HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Tx process is not already ongoing */
+ if(hsc->gState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->pTxBuffPtr = pData;
+ hsc->TxXferSize = Size;
+ hsc->TxXferCount = Size;
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ /* Enable the SMARTCARD Parity Error Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the SMARTCARD Transmit data register empty Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Rx process is not already ongoing */
+ if(hsc->RxState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->pRxBuffPtr = pData;
+ hsc->RxXferSize = Size;
+ hsc->RxXferCount = Size;
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ /* Enable the SMARTCARD Data Register not empty Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Enable the SMARTCARD Parity Error Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Tx process is not already ongoing */
+ if(hsc->gState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->pTxBuffPtr = pData;
+ hsc->TxXferSize = Size;
+ hsc->TxXferCount = Size;
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->gState = HAL_SMARTCARD_STATE_BUSY_TX;
+
+ /* Set the SMARTCARD DMA transfer complete callback */
+ hsc->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
+
+ /* Set the DMA error callback */
+ hsc->hdmatx->XferErrorCallback = SMARTCARD_DMAError;
+
+ /* Set the DMA abort callback */
+ hsc->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the SMARTCARD transmit DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hsc->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsc->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_SMARTCARD_CLEAR_FLAG(hsc, SMARTCARD_FLAG_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the SMARTCARD CR3 register */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @note When the SMARTCARD parity is enabled (PCE = 1) the data received contain the parity bit.s
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Rx process is not already ongoing */
+ if(hsc->RxState == HAL_SMARTCARD_STATE_READY)
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsc);
+
+ hsc->pRxBuffPtr = pData;
+ hsc->RxXferSize = Size;
+
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ hsc->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
+
+ /* Set the SMARTCARD DMA transfer complete callback */
+ hsc->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
+
+ /* Set the DMA error callback */
+ hsc->hdmarx->XferErrorCallback = SMARTCARD_DMAError;
+
+ /* Set the DMA abort callback */
+ hsc->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(hsc->hdmarx, (uint32_t)&hsc->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ /* Enable the SMARTCARD Parity Error Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the SMARTCARD CR3 register */
+ SET_BIT(hsc->Instance->CR3, USART_CR3_DMAR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles SMARTCARD interrupt request.
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint32_t isrflags = READ_REG(hsc->Instance->SR);
+ uint32_t cr1its = READ_REG(hsc->Instance->CR1);
+ uint32_t cr3its = READ_REG(hsc->Instance->CR3);
+ uint32_t dmarequest = 0x00U;
+ uint32_t errorflags = 0x00U;
+
+ /* If no error occurs */
+ errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE));
+ if(errorflags == RESET)
+ {
+ /* SMARTCARD in mode Receiver -------------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ SMARTCARD_Receive_IT(hsc);
+ return;
+ }
+ }
+
+ /* If some errors occur */
+ if((errorflags != RESET) && ((cr3its & (USART_CR3_EIE | USART_CR1_PEIE)) != RESET))
+ {
+ /* SMARTCARD parity error interrupt occurred ---------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+ {
+ hsc->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
+ }
+
+ /* SMARTCARD frame error interrupt occurred ----------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hsc->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
+ }
+
+ /* SMARTCARD noise error interrupt occurred ----------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hsc->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
+ }
+
+ /* SMARTCARD Over-Run interrupt occurred -------------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ hsc->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
+ }
+ /* Call the Error call Back in case of Errors */
+ if(hsc->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
+ {
+ /* SMARTCARD in mode Receiver -----------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ SMARTCARD_Receive_IT(hsc);
+ }
+
+ /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+ consider error as blocking */
+ dmarequest = HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAR);
+ if(((hsc->ErrorCode & HAL_SMARTCARD_ERROR_ORE) != RESET) || dmarequest)
+ {
+ /* Blocking error : transfer is aborted
+ Set the SMARTCARD state ready to be able to start again the process,
+ Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+ SMARTCARD_EndRxTransfer(hsc);
+ /* Disable the SMARTCARD DMA Rx request if enabled */
+ if(HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAR))
+ {
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the SMARTCARD DMA Rx channel */
+ if(hsc->hdmarx != NULL)
+ {
+ /* Set the SMARTCARD DMA Abort callback :
+ will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */
+ hsc->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError;
+
+ if(HAL_DMA_Abort_IT(hsc->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hsc->hdmarx->XferAbortCallback(hsc->hdmarx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_SMARTCARD_ErrorCallback(hsc);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_SMARTCARD_ErrorCallback(hsc);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_SMARTCARD_ErrorCallback(hsc);
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+ }
+ }
+ return;
+ } /* End if some error occurs */
+
+ /* SMARTCARD in mode Transmitter -------------------------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+ {
+ SMARTCARD_Transmit_IT(hsc);
+ return;
+ }
+
+ /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
+ if(((isrflags & SMARTCARD_FLAG_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+ {
+ SMARTCARD_EndTransmit_IT(hsc);
+ return;
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SMARTCARD error callbacks
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+ __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SMARTCARD_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief SMARTCARD State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SmartCard.
+ (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state of the SmartCard peripheral.
+ (+) HAL_SMARTCARD_GetError() check in run-time errors that could be occurred during communication.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief return the SMARTCARD state
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL state
+ */
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint32_t temp1= 0x00U, temp2 = 0x00U;
+ temp1 = hsc->gState;
+ temp2 = hsc->RxState;
+
+ return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+ * @brief Return the SMARTCARD error code
+ * @param hsc : pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for the specified SMARTCARD.
+ * @retval SMARTCARD Error Code
+ */
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc)
+{
+ return hsc->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA SMARTCARD transmit process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ hsc->TxXferCount = 0U;
+
+ /* Disable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAT);
+
+ /* Enable the SMARTCARD Transmit Complete Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_TCIE);
+}
+
+/**
+ * @brief DMA SMARTCARD receive process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ hsc->RxXferCount = 0U;
+
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hsc->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_DMAR);
+
+ /* At end of Rx process, restore hsc->RxState to Ready */
+ hsc->RxState = HAL_SMARTCARD_STATE_READY;
+
+ HAL_SMARTCARD_RxCpltCallback(hsc);
+}
+
+/**
+ * @brief DMA SMARTCARD communication error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)
+{
+ uint32_t dmarequest = 0x00U;
+ SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hsc->RxXferCount = 0U;
+ hsc->TxXferCount = 0U;
+ hsc->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
+
+ /* Stop SMARTCARD DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAT);
+ if((hsc->gState == HAL_SMARTCARD_STATE_BUSY_TX) && dmarequest)
+ {
+ SMARTCARD_EndTxTransfer(hsc);
+ }
+
+ /* Stop SMARTCARD DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(hsc->Instance->CR3, USART_CR3_DMAR);
+ if((hsc->RxState == HAL_SMARTCARD_STATE_BUSY_RX) && dmarequest)
+ {
+ SMARTCARD_EndRxTransfer(hsc);
+ }
+
+ HAL_SMARTCARD_ErrorCallback(hsc);
+}
+
+/**
+ * @brief This function handles SMARTCARD Communication Timeout.
+ * @param hsc: SMARTCARD handle
+ * @param Flag: specifies the SMARTCARD flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Timeout: Timeout duration
+ * @param Tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is set */
+ while((__HAL_SMARTCARD_GET_FLAG(hsc, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ /* Disable TXE and RXNE interrupts for the interrupt process */
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_TXEIE);
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_RXNEIE);
+
+ hsc->gState= HAL_SMARTCARD_STATE_READY;
+ hsc->RxState= HAL_SMARTCARD_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hsc);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion).
+ * @param hsc: SMARTCARD handle.
+ * @retval None
+ */
+static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* At end of Tx process, restore hsc->gState to Ready */
+ hsc->gState = HAL_SMARTCARD_STATE_READY;
+
+ /* Disable TXEIE and TCIE interrupts */
+ CLEAR_BIT(hsc->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+}
+
+
+/**
+ * @brief End ongoing Rx transfer on SMARTCARD peripheral (following error detection or Reception completion).
+ * @param hsc: SMARTCARD handle.
+ * @retval None
+ */
+static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsc)
+{
+ /* At end of Rx process, restore hsc->RxState to Ready */
+ hsc->RxState = HAL_SMARTCARD_STATE_READY;
+
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(hsc->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+}
+
+/**
+ * @brief Send an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint16_t* tmp;
+
+ /* Check that a Tx process is ongoing */
+ if(hsc->gState == HAL_SMARTCARD_STATE_BUSY_TX)
+ {
+ tmp = (uint16_t*) hsc->pTxBuffPtr;
+ hsc->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ hsc->pTxBuffPtr += 1U;
+
+ if(--hsc->TxXferCount == 0U)
+ {
+ /* Disable the SMARTCARD Transmit data register empty Interrupt */
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Enable the SMARTCARD Transmit Complete Interrupt */
+ SET_BIT(hsc->Instance->CR1, USART_CR1_TCIE);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for the specified SMARTCARD module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+ /* Disable the SMARTCARD Transmit Complete Interrupt */
+ CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TCIE);
+
+ /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+ /* Tx process is ended, restore hsmartcard->gState to Ready */
+ hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
+
+ HAL_SMARTCARD_TxCpltCallback(hsmartcard);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receive an amount of data in non blocking mode
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint16_t* tmp;
+
+ /* Check that a Rx process is ongoing */
+ if(hsc->RxState == HAL_SMARTCARD_STATE_BUSY_RX)
+ {
+ tmp = (uint16_t*) hsc->pRxBuffPtr;
+ *tmp = (uint8_t)(hsc->Instance->DR & (uint8_t)0x00FFU);
+ hsc->pRxBuffPtr += 1U;
+
+ if(--hsc->RxXferCount == 0U)
+ {
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the SMARTCARD Parity Error Interrupt */
+ CLEAR_BIT(hsc->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(hsc->Instance->CR3, USART_CR3_EIE);
+
+ /* Rx process is completed, restore hsc->RxState to Ready */
+ hsc->RxState = HAL_SMARTCARD_STATE_READY;
+
+ HAL_SMARTCARD_RxCpltCallback(hsc);
+
+ return HAL_OK;
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ SMARTCARD_HandleTypeDef* hsc = (SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hsc->RxXferCount = 0x00U;
+ hsc->TxXferCount = 0x00U;
+
+ HAL_SMARTCARD_ErrorCallback(hsc);
+}
+
+/**
+ * @brief Configure the SMARTCARD peripheral
+ * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+ * the configuration information for SMARTCARD module.
+ * @retval None
+ */
+static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+ assert_param(IS_SMARTCARD_POLARITY(hsc->Init.CLKPolarity));
+ assert_param(IS_SMARTCARD_PHASE(hsc->Init.CLKPhase));
+ assert_param(IS_SMARTCARD_LASTBIT(hsc->Init.CLKLastBit));
+ assert_param(IS_SMARTCARD_BAUDRATE(hsc->Init.BaudRate));
+ assert_param(IS_SMARTCARD_WORD_LENGTH(hsc->Init.WordLength));
+ assert_param(IS_SMARTCARD_STOPBITS(hsc->Init.StopBits));
+ assert_param(IS_SMARTCARD_PARITY(hsc->Init.Parity));
+ assert_param(IS_SMARTCARD_MODE(hsc->Init.Mode));
+ assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));
+
+ /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the
+ receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */
+ CLEAR_BIT(hsc->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+
+ /*---------------------------- USART CR2 Configuration ---------------------*/
+ tmpreg = hsc->Instance->CR2;
+ /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL));
+ /* Configure the SMARTCARD Clock, CPOL, CPHA and LastBit -----------------------*/
+ /* Set CPOL bit according to hsc->Init.CLKPolarity value */
+ /* Set CPHA bit according to hsc->Init.CLKPhase value */
+ /* Set LBCL bit according to hsc->Init.CLKLastBit value */
+ /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
+ tmpreg |= (uint32_t)(USART_CR2_CLKEN | hsc->Init.CLKPolarity |
+ hsc->Init.CLKPhase| hsc->Init.CLKLastBit | hsc->Init.StopBits);
+ /* Write to USART CR2 */
+ WRITE_REG(hsc->Instance->CR2, (uint32_t)tmpreg);
+
+ tmpreg = hsc->Instance->CR2;
+
+ /* Clear STOP[13:12] bits */
+ tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);
+
+ /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
+ tmpreg |= (uint32_t)(hsc->Init.StopBits);
+
+ /* Write to USART CR2 */
+ WRITE_REG(hsc->Instance->CR2, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = hsc->Instance->CR1;
+
+ /* Clear M, PCE, PS, TE and RE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+ USART_CR1_RE));
+
+ /* Configure the SMARTCARD Word Length, Parity and mode:
+ Set the M bits according to hsc->Init.WordLength value
+ Set PCE and PS bits according to hsc->Init.Parity value
+ Set TE and RE bits according to hsc->Init.Mode value */
+ tmpreg |= (uint32_t)hsc->Init.WordLength | hsc->Init.Parity | hsc->Init.Mode;
+
+ /* Write to USART CR1 */
+ WRITE_REG(hsc->Instance->CR1, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* Clear CTSE and RTSE bits */
+ CLEAR_BIT(hsc->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE));
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ if((hsc->Instance == USART1) || (hsc->Instance == USART6))
+ {
+ hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK2Freq(), hsc->Init.BaudRate);
+ }
+ else
+ {
+ hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK1Freq(), hsc->Init.BaudRate);
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_smartcard.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,677 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SMARTCARD_H
+#define __STM32F4xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+ * @{
+ */
+
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref SMARTCARD_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref SMARTCARD_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits).*/
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock
+ to provide the smartcard clock. The value given in the register (5 significant bits)
+ is multiplied by 2 to give the division factor of the source clock frequency.
+ This parameter can be a value of @ref SMARTCARD_Prescaler */
+
+ uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks */
+
+ uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state.
+ This parameter can be a value of @ref SMARTCARD_NACK_State */
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief HAL SMARTCARD State structures definition
+ * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains SMARTCARD state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+ HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
+ Value is allowed for gState only */
+ HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error
+ Value is allowed for gState only */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_SMARTCARD_StateTypeDef gState; /* SmartCard state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
+
+ __IO HAL_SMARTCARD_StateTypeDef RxState; /* SmartCard state information related to Rx operations.
+ This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /* SmartCard Error code */
+
+}SMARTCARD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants
+ * @{
+ */
+/** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code
+ * @brief SMARTCARD Error Code
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint32_t)0x00000000U)
+#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint32_t)0x00000000U)
+#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x00000000U)
+#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests
+ * @{
+ */
+#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT)
+#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler
+ * @{
+ */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV2 ((uint32_t)0x00000001U) /*!< SYSCLK divided by 2 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV4 ((uint32_t)0x00000002U) /*!< SYSCLK divided by 4 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV6 ((uint32_t)0x00000003U) /*!< SYSCLK divided by 6 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV8 ((uint32_t)0x00000004U) /*!< SYSCLK divided by 8 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV10 ((uint32_t)0x00000005U) /*!< SYSCLK divided by 10 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV12 ((uint32_t)0x00000006U) /*!< SYSCLK divided by 12 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV14 ((uint32_t)0x00000007U) /*!< SYSCLK divided by 14 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV16 ((uint32_t)0x00000008U) /*!< SYSCLK divided by 16 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV18 ((uint32_t)0x00000009U) /*!< SYSCLK divided by 18 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV20 ((uint32_t)0x0000000AU) /*!< SYSCLK divided by 20 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV22 ((uint32_t)0x0000000BU) /*!< SYSCLK divided by 22 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV24 ((uint32_t)0x0000000CU) /*!< SYSCLK divided by 24 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV26 ((uint32_t)0x0000000DU) /*!< SYSCLK divided by 26 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV28 ((uint32_t)0x0000000EU) /*!< SYSCLK divided by 28 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV30 ((uint32_t)0x0000000FU) /*!< SYSCLK divided by 30 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV32 ((uint32_t)0x00000010U) /*!< SYSCLK divided by 32 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV34 ((uint32_t)0x00000011U) /*!< SYSCLK divided by 34 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV36 ((uint32_t)0x00000012U) /*!< SYSCLK divided by 36 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV38 ((uint32_t)0x00000013U) /*!< SYSCLK divided by 38 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV40 ((uint32_t)0x00000014U) /*!< SYSCLK divided by 40 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV42 ((uint32_t)0x00000015U) /*!< SYSCLK divided by 42 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV44 ((uint32_t)0x00000016U) /*!< SYSCLK divided by 44 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV46 ((uint32_t)0x00000017U) /*!< SYSCLK divided by 46 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV48 ((uint32_t)0x00000018U) /*!< SYSCLK divided by 48 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV50 ((uint32_t)0x00000019U) /*!< SYSCLK divided by 50 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV52 ((uint32_t)0x0000001AU) /*!< SYSCLK divided by 52 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV54 ((uint32_t)0x0000001BU) /*!< SYSCLK divided by 54 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV56 ((uint32_t)0x0000001CU) /*!< SYSCLK divided by 56 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV58 ((uint32_t)0x0000001DU) /*!< SYSCLK divided by 58 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV60 ((uint32_t)0x0000001EU) /*!< SYSCLK divided by 60 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV62 ((uint32_t)0x0000001FU) /*!< SYSCLK divided by 62 */
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080U)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040U)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020U)
+#define SMARTCARD_FLAG_IDLE ((uint32_t)0x00000010U)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008U)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004U)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002U)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR3 register
+ * @{
+ */
+#define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+#define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMARTCARD handle gstate & RxState
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
+ } while(0)
+
+/** @brief Flushs the Smartcard DR register
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ */
+#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag
+ * @arg SMARTCARD_FLAG_ORE: Overrun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag.
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun
+ * error) flags are cleared by software sequence: a read operation to
+ * USART_SR register followed by a read operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ */
+#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the SMARTCARD PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the SMARTCARD FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * SMARTCARD peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified SmartCard interrupts.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))
+
+/** @brief Macro to enable the SMARTCARD's one bit sample method
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Macro to disable the SMARTCARD's one bit sample method
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Macros to enable or disable the SmartCard DMA request.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __REQUEST__: specifies the SmartCard DMA request.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
+ * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
+ */
+#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__))
+#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
+ * @{
+ */
+
+/** @brief SMARTCARD interruptions flag mask
+ *
+ */
+#define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR3_EIE )
+
+#define SMARTCARD_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
+#define SMARTCARD_DIVMANT(_PCLK_, _BAUD_) (SMARTCARD_DIV((_PCLK_), (_BAUD_))/100U)
+#define SMARTCARD_DIVFRAQ(_PCLK_, _BAUD_) (((SMARTCARD_DIV((_PCLK_), (_BAUD_)) - (SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
+/* SMARTCARD BRR = mantissa + overflow + fraction
+ = (SMARTCARD DIVMANT << 4) + (SMARTCARD DIVFRAQ & 0xF0) + (SMARTCARD DIVFRAQ & 0x0FU) */
+#define SMARTCARD_BRR(_PCLK_, _BAUD_) (((SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) << 4U) + \
+ (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0U)) + \
+ (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU))
+
+#define SMARTCARD_CR1_REG_INDEX 1U
+#define SMARTCARD_CR3_REG_INDEX 3U
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
+ * @{
+ */
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_1_5))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3U) == 0x00U) && ((MODE) != (uint32_t)0x000000U))
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))
+#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \
+ ((NACK) == SMARTCARD_NACK_DISABLE))
+#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1298 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spdifrx.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the SPDIFRX audio interface:
+ * + Initialization and Configuration
+ * + Data transfers functions
+ * + DMA transfers management
+ * + Interrupts and flags management
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The SPDIFRX HAL driver can be used as follow:
+
+ (#) Declare SPDIFRX_HandleTypeDef handle structure.
+ (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API:
+ (##) Enable the SPDIFRX interface clock.
+ (##) SPDIFRX pins configuration:
+ (+++) Enable the clock for the SPDIFRX GPIOs.
+ (+++) Configure these SPDIFRX pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveControlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's).
+ (+++) Configure the SPDIFRX interrupt priority.
+ (+++) Enable the NVIC SPDIFRX IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveControlFlow_DMA() API's).
+ (+++) Declare a DMA handle structure for the reception of the Data Flow channel.
+ (+++) Declare a DMA handle structure for the reception of the Control Flow channel.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters.
+ (+++) Configure the DMA Channel.
+ (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+ DMA CtrlRx/DataRx channel.
+
+ (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits
+ using HAL_SPDIFRX_Init() function.
+
+ -@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros
+ __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process.
+ -@- Make sure that ck_spdif clock is configured.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode for reception operation (for debug purpose) ***
+ ================================================================
+ [..]
+ (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow()
+ (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveControlFlow()
+
+ *** Interrupt mode for reception operation ***
+ =========================================
+ [..]
+ (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT()
+ (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveControlFlow_IT()
+ (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
+ (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
+
+ *** DMA mode for reception operation ***
+ ========================================
+ [..]
+ (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA()
+ (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveControlFlow_DMA()
+ (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
+ (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
+ (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop()
+
+ *** SPDIFRX HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in SPDIFRX HAL driver.
+ (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State)
+ (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State)
+ (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State)
+ (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts
+ (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts
+ (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not.
+
+ [..]
+ (@) You can refer to the SPDIFRX HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup SPDIFRX SPDIFRX
+ * @brief SPDIFRX HAL module driver
+ * @{
+ */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define SPDIFRX_TIMEOUT_VALUE 0xFFFF
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @addtogroup SPDIFRX_Private_Functions
+ * @{
+ */
+static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma);
+static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
+static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
+static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+
+/**
+ * @}
+ */
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions
+ * @{
+ */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the SPDIFRX peripheral:
+
+ (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with
+ the selected configuration:
+ (++) Input Selection (IN0, IN1,...)
+ (++) Maximum allowed re-tries during synchronization phase
+ (++) Wait for activity on SPDIF selected input
+ (++) Channel status selection (from channel A or B)
+ (++) Data format (LSB, MSB, ...)
+ (++) Stereo mode
+ (++) User bits masking (PT,C,U,V,...)
+
+ (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration
+ of the selected SPDIFRXx peripheral.
+ @endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SPDIFRX according to the specified parameters
+ * in the SPDIFRX_InitTypeDef and create the associated handle.
+ * @param hspdif: SPDIFRX handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the SPDIFRX handle allocation */
+ if(hspdif == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the SPDIFRX parameters */
+ assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode));
+ assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection));
+ assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries));
+ assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity));
+ assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection));
+ assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat));
+ assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask));
+ assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask));
+ assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask));
+ assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask));
+
+ if(hspdif->State == HAL_SPDIFRX_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hspdif->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_SPDIFRX_MspInit(hspdif);
+ }
+
+ /* SPDIFRX peripheral state is BUSY*/
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+ /* Disable SPDIFRX interface (IDLE State) */
+ __HAL_SPDIFRX_IDLE(hspdif);
+
+ /* Reset the old SPDIFRX CR configuration */
+ tmpreg = hspdif->Instance->CR;
+
+ tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
+ SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK |
+ SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA |
+ SPDIFRX_CR_INSEL);
+
+ /* Sets the new configuration of the SPDIFRX peripheral */
+ tmpreg |= ((uint16_t) hspdif->Init.StereoMode |
+ hspdif->Init.InputSelection |
+ hspdif->Init.Retries |
+ hspdif->Init.WaitForActivity |
+ hspdif->Init.ChannelSelection |
+ hspdif->Init.DataFormat |
+ hspdif->Init.PreambleTypeMask |
+ hspdif->Init.ChannelStatusMask |
+ hspdif->Init.ValidityBitMask |
+ hspdif->Init.ParityErrorMask);
+
+ hspdif->Instance->CR = tmpreg;
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+ /* SPDIFRX peripheral state is READY*/
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the SPDIFRX peripheral
+ * @param hspdif: SPDIFRX handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Check the SPDIFRX handle allocation */
+ if(hspdif == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance));
+
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+ /* Disable SPDIFRX interface (IDLE state) */
+ __HAL_SPDIFRX_IDLE(hspdif);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_SPDIFRX_MspDeInit(hspdif);
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+ /* SPDIFRX peripheral state is RESET*/
+ hspdif->State = HAL_SPDIFRX_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SPDIFRX MSP Init
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SPDIFRX MSP DeInit
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Sets the SPDIFRX dtat format according to the specified parameters
+ * in the SPDIFRX_InitTypeDef.
+ * @param hspdif: SPDIFRX handle
+ * @param sDataFormat: SPDIFRX data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the SPDIFRX handle allocation */
+ if(hspdif == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the SPDIFRX parameters */
+ assert_param(IS_STEREO_MODE(sDataFormat.StereoMode));
+ assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat));
+ assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask));
+ assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask));
+ assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask));
+ assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask));
+
+ /* Reset the old SPDIFRX CR configuration */
+ tmpreg = hspdif->Instance->CR;
+
+ if(((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) &&
+ (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) ||
+ ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode)))
+ {
+ return HAL_ERROR;
+ }
+
+ tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
+ SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK);
+
+ /* Sets the new configuration of the SPDIFRX peripheral */
+ tmpreg |= ((uint16_t) sDataFormat.StereoMode |
+ sDataFormat.DataFormat |
+ sDataFormat.PreambleTypeMask |
+ sDataFormat.ChannelStatusMask |
+ sDataFormat.ValidityBitMask |
+ sDataFormat.ParityErrorMask);
+
+ hspdif->Instance->CR = tmpreg;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+===============================================================================
+ ##### IO operation functions #####
+===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SPDIFRX data
+ transfers.
+
+ (#) There is two mode of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer start-up.
+ The end of the data processing will be indicated through the
+ dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_SPDIFRX_ReceiveDataFlow()
+ (++) HAL_SPDIFRX_ReceiveControlFlow()
+ (+@) Do not use blocking mode to receive both control and data flow at the same time.
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_SPDIFRX_ReceiveControlFlow_IT()
+ (++) HAL_SPDIFRX_ReceiveDataFlow_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_SPDIFRX_ReceiveControlFlow_DMA()
+ (++) HAL_SPDIFRX_ReceiveDataFlow_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+ (++) HAL_SPDIFRX_RxCpltCallback()
+ (++) HAL_SPDIFRX_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Receives an amount of data (Data Flow) in blocking mode.
+ * @param hspdif: pointer to SPDIFRX_HandleTypeDef structure that contains
+ * the configuration information for SPDIFRX module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hspdif->State == HAL_SPDIFRX_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+ /* Start synchronisation */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+
+ /* Receive data flow */
+ while(Size > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ (*pData++) = hspdif->Instance->DR;
+ Size--;
+ }
+
+ /* SPDIFRX ready */
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data (Control Flow) in blocking mode.
+ * @param hspdif: pointer to a SPDIFRX_HandleTypeDef structure that contains
+ * the configuration information for SPDIFRX module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if(hspdif->State == HAL_SPDIFRX_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+
+ /* Receive control flow */
+ while(Size > 0U)
+ {
+ /* Wait until CSRNE flag is set */
+ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ (*pData++) = hspdif->Instance->CSR;
+ Size--;
+ }
+
+ /* SPDIFRX ready */
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt
+ * @param hspdif: SPDIFRX handle
+ * @param pData: a 32-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be received .
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
+
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
+ {
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->pRxBuffPtr = pData;
+ hspdif->RxXferSize = Size;
+ hspdif->RxXferCount = Size;
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+ /* Check if a receive process is ongoing or not */
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
+
+ /* Enable the SPDIFRX PE Error Interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+
+ /* Enable the SPDIFRX OVR Error Interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ /* Enable the SPDIFRX RXNE interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+
+ if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U)
+ {
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data (Control Flow) with Interrupt
+ * @param hspdif: SPDIFRX handle
+ * @param pData: a 32-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample (Control Flow) to be received :
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
+
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->pCsBuffPtr = pData;
+ hspdif->CsXferSize = Size;
+ hspdif->CsXferCount = Size;
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+ /* Check if a receive process is ongoing or not */
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
+
+ /* Enable the SPDIFRX PE Error Interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+
+ /* Enable the SPDIFRX OVR Error Interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ /* Enable the SPDIFRX CSRNE interrupt */
+ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+
+ if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U)
+ {
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data (Data Flow) mode with DMA
+ * @param hspdif: SPDIFRX handle
+ * @param pData: a 32-bit pointer to the Receive data buffer.
+ * @param Size: number of data sample to be received :
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
+ {
+ hspdif->pRxBuffPtr = pData;
+ hspdif->RxXferSize = Size;
+ hspdif->RxXferCount = Size;
+
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
+
+ /* Set the SPDIFRX Rx DMA Half transfer complete callback */
+ hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt;
+
+ /* Set the SPDIFRX Rx DMA transfer complete callback */
+ hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt;
+
+ /* Set the DMA error callback */
+ hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError;
+
+ /* Enable the DMA request */
+ HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size);
+
+ /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/
+ hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN;
+
+ if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U)
+ {
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data (Control Flow) with DMA
+ * @param hspdif: SPDIFRX handle
+ * @param pData: a 32-bit pointer to the Receive data buffer.
+ * @param Size: number of data (Control Flow) sample to be received :
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U);
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
+ {
+ hspdif->pCsBuffPtr = pData;
+ hspdif->CsXferSize = Size;
+ hspdif->CsXferCount = Size;
+
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+ hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
+
+ /* Set the SPDIFRX Rx DMA Half transfer complete callback */
+ hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt;
+
+ /* Set the SPDIFRX Rx DMA transfer complete callback */
+ hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt;
+
+ /* Set the DMA error callback */
+ hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError;
+
+ /* Enable the DMA request */
+ HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size);
+
+ /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/
+ hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN;
+
+ if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U)
+ {
+ /* Start synchronization */
+ __HAL_SPDIFRX_SYNC(hspdif);
+
+ /* Wait until SYNCD flag is set */
+ do
+ {
+ if (count-- == 0)
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET);
+
+ /* Start reception */
+ __HAL_SPDIFRX_RCV(hspdif);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief stop the audio stream receive from the Media.
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Process Locked */
+ __HAL_LOCK(hspdif);
+
+ /* Disable the SPDIFRX DMA requests */
+ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
+ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
+
+ /* Disable the SPDIFRX DMA channel */
+ __HAL_DMA_DISABLE(hspdif->hdmaDrRx);
+ __HAL_DMA_DISABLE(hspdif->hdmaCsRx);
+
+ /* Disable SPDIFRX peripheral */
+ __HAL_SPDIFRX_IDLE(hspdif);
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles SPDIFRX interrupt request.
+ * @param hspdif: SPDIFRX handle
+ * @retval HAL status
+ */
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* SPDIFRX in mode Data Flow Reception ------------------------------------------------*/
+ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_RXNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_RXNE) != RESET))
+ {
+ __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE);
+ SPDIFRX_ReceiveDataFlow_IT(hspdif);
+ }
+
+ /* SPDIFRX in mode Control Flow Reception ------------------------------------------------*/
+ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_CSRNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_CSRNE) != RESET))
+ {
+ __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE);
+ SPDIFRX_ReceiveControlFlow_IT(hspdif);
+ }
+
+ /* SPDIFRX Overrun error interrupt occurred ---------------------------------*/
+ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_OVR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_OVRIE) != RESET))
+ {
+ __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_OVR);
+
+ /* Change the SPDIFRX error code */
+ hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR;
+
+ /* the transfer is not stopped */
+ HAL_SPDIFRX_ErrorCallback(hspdif);
+ }
+
+ /* SPDIFRX Parity error interrupt occurred ---------------------------------*/
+ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_PERR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_PERRIE) != RESET))
+ {
+ __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_PERR);
+
+ /* Change the SPDIFRX error code */
+ hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE;
+
+ /* the transfer is not stopped */
+ HAL_SPDIFRX_ErrorCallback(hspdif);
+ }
+}
+
+/**
+ * @brief Rx Transfer (Data flow) half completed callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer (Data flow) completed callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx (Control flow) Transfer half completed callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer (Control flow) completed callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SPDIFRX error callbacks
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspdif);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SPDIFRX_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+===============================================================================
+ ##### Peripheral State and Errors functions #####
+===============================================================================
+[..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the SPDIFRX state
+ * @param hspdif : SPDIFRX handle
+ * @retval HAL state
+ */
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif)
+{
+ return hspdif->State;
+}
+
+/**
+ * @brief Return the SPDIFRX error code
+ * @param hspdif : SPDIFRX handle
+ * @retval SPDIFRX Error Code
+ */
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif)
+{
+ return hspdif->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA SPDIFRX receive process (Data flow) complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Rx DMA Request */
+ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
+ hspdif->RxXferCount = 0U;
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+ HAL_SPDIFRX_RxCpltCallback(hspdif);
+}
+
+/**
+ * @brief DMA SPDIFRX receive process (Data flow) half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_SPDIFRX_RxHalfCpltCallback(hspdif);
+}
+
+/**
+ * @brief DMA SPDIFRX receive process (Control flow) complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Cb DMA Request */
+ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
+ hspdif->CsXferCount = 0U;
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+ HAL_SPDIFRX_CxCpltCallback(hspdif);
+}
+
+/**
+ * @brief DMA SPDIFRX receive process (Control flow) half complete callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_SPDIFRX_CxHalfCpltCallback(hspdif);
+}
+
+/**
+ * @brief DMA SPDIFRX communication error callback
+ * @param hdma : DMA handle
+ * @retval None
+ */
+static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Disable Rx and Cb DMA Request */
+ hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN));
+ hspdif->RxXferCount = 0U;
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Set the error code and execute error callback*/
+ hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA;
+ HAL_SPDIFRX_ErrorCallback(hspdif);
+}
+
+/**
+ * @brief Receive an amount of data (Data Flow) with Interrupt
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Receive data */
+ (*hspdif->pRxBuffPtr++) = hspdif->Instance->DR;
+ hspdif->RxXferCount--;
+
+ if(hspdif->RxXferCount == 0U)
+ {
+ /* Disable RXNE/PE and OVR interrupts */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE);
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ HAL_SPDIFRX_RxCpltCallback(hspdif);
+ }
+}
+
+/**
+ * @brief Receive an amount of data (Control Flow) with Interrupt
+ * @param hspdif: SPDIFRX handle
+ * @retval None
+ */
+static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
+{
+ /* Receive data */
+ (*hspdif->pCsBuffPtr++) = hspdif->Instance->CSR;
+ hspdif->CsXferCount--;
+
+ if(hspdif->CsXferCount == 0U)
+ {
+ /* Disable CSRNE interrupt */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+
+ hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ HAL_SPDIFRX_CxCpltCallback(hspdif);
+ }
+}
+
+/**
+ * @brief This function handles SPDIFRX Communication Timeout.
+ * @param hspdif: SPDIFRX handle
+ * @param Flag: Flag checked
+ * @param Status: Value of the flag expected
+ * @param Timeout: Duration of the timeout
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until flag is set */
+ if(Status == RESET)
+ {
+ while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) != RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+ hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspdif);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spdifrx.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,555 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spdifrx.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SPDIFRX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPDIFRX_H
+#define __STM32F4xx_HAL_SPDIFRX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPDIFRX
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPDIFRX Init structure definition
+ */
+typedef struct
+{
+ uint32_t InputSelection; /*!< Specifies the SPDIF input selection.
+ This parameter can be a value of @ref SPDIFRX_Input_Selection */
+
+ uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase.
+ This parameter can be a value of @ref SPDIFRX_Max_Retries */
+
+ uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input.
+ This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */
+
+ uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B.
+ This parameter can be a value of @ref SPDIFRX_Channel_Selection */
+
+ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
+ This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
+ This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PE_Mask */
+}SPDIFRX_InitTypeDef;
+
+/**
+ * @brief SPDIFRX SetDataFormat structure definition
+ */
+typedef struct
+{
+ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
+ This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
+ This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PE_Mask */
+}SPDIFRX_SetDataFormatTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SPDIFRX_STATE_RESET = 0x00U, /*!< SPDIFRX not yet initialized or disabled */
+ HAL_SPDIFRX_STATE_READY = 0x01U, /*!< SPDIFRX initialized and ready for use */
+ HAL_SPDIFRX_STATE_BUSY = 0x02U, /*!< SPDIFRX internal process is ongoing */
+ HAL_SPDIFRX_STATE_BUSY_RX = 0x03U, /*!< SPDIFRX internal Data Flow RX process is ongoing */
+ HAL_SPDIFRX_STATE_BUSY_CX = 0x04U, /*!< SPDIFRX internal Control Flow RX process is ongoing */
+ HAL_SPDIFRX_STATE_ERROR = 0x07U /*!< SPDIFRX error state */
+}HAL_SPDIFRX_StateTypeDef;
+
+/**
+ * @brief SPDIFRX handle Structure definition
+ */
+typedef struct
+{
+ SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */
+
+ SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */
+
+ uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */
+
+ uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */
+
+ __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */
+
+ __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */
+
+ __IO uint32_t ErrorCode; /* SPDIFRX Error code */
+}SPDIFRX_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants
+ * @{
+ */
+/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code
+ * @{
+ */
+#define HAL_SPDIFRX_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SPDIFRX_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */
+#define HAL_SPDIFRX_ERROR_OVR ((uint32_t)0x00000002U) /*!< OVR error */
+#define HAL_SPDIFRX_ERROR_PE ((uint32_t)0x00000004U) /*!< Parity error */
+#define HAL_SPDIFRX_ERROR_DMA ((uint32_t)0x00000008U) /*!< DMA transfer error */
+#define HAL_SPDIFRX_ERROR_UNKNOWN ((uint32_t)0x00000010U) /*!< Unknown Error error */
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection
+ * @{
+ */
+#define SPDIFRX_INPUT_IN0 ((uint32_t)0x00000000U)
+#define SPDIFRX_INPUT_IN1 ((uint32_t)0x00010000U)
+#define SPDIFRX_INPUT_IN2 ((uint32_t)0x00020000U)
+#define SPDIFRX_INPUT_IN3 ((uint32_t)0x00030000U)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries
+ * @{
+ */
+#define SPDIFRX_MAXRETRIES_NONE ((uint32_t)0x00000000U)
+#define SPDIFRX_MAXRETRIES_3 ((uint32_t)0x00001000U)
+#define SPDIFRX_MAXRETRIES_15 ((uint32_t)0x00002000U)
+#define SPDIFRX_MAXRETRIES_63 ((uint32_t)0x00003000U)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity
+ * @{
+ */
+#define SPDIFRX_WAITFORACTIVITY_OFF ((uint32_t)0x00000000U)
+#define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask
+* @{
+*/
+#define SPDIFRX_PREAMBLETYPEMASK_OFF ((uint32_t)0x00000000U)
+#define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask
+* @{
+*/
+#define SPDIFRX_CHANNELSTATUS_OFF ((uint32_t)0x00000000U) /* The channel status and user bits are copied into the SPDIF_DR */
+#define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask
+* @{
+*/
+#define SPDIFRX_VALIDITYMASK_OFF ((uint32_t)0x00000000U)
+#define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask
+* @{
+*/
+#define SPDIFRX_PARITYERRORMASK_OFF ((uint32_t)0x00000000U)
+#define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection
+ * @{
+ */
+#define SPDIFRX_CHANNEL_A ((uint32_t)0x00000000U)
+#define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format
+ * @{
+ */
+#define SPDIFRX_DATAFORMAT_LSB ((uint32_t)0x00000000U)
+#define SPDIFRX_DATAFORMAT_MSB ((uint32_t)0x00000010U)
+#define SPDIFRX_DATAFORMAT_32BITS ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode
+ * @{
+ */
+#define SPDIFRX_STEREOMODE_DISABLE ((uint32_t)0x00000000U)
+#define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_State SPDIFRX State
+ * @{
+ */
+
+#define SPDIFRX_STATE_IDLE ((uint32_t)0xFFFFFFFCU)
+#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001U)
+#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition
+ * @{
+ */
+#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE)
+#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE)
+#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE)
+#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE)
+#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE)
+#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE)
+#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE )
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition
+ * @{
+ */
+#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE)
+#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE)
+#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR)
+#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR)
+#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD)
+#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD)
+#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR)
+#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR)
+#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPDIFRX handle state
+ * @param __HANDLE__: SPDIFRX handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN)
+
+/** @brief Disable the specified SPDIFRX peripheral (IDLE State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE)
+
+/** @brief Enable the specified SPDIFRX peripheral (SYNC State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC)
+
+
+/** @brief Enable the specified SPDIFRX peripheral (RCV State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV)
+
+/** @brief Enable or disable the specified SPDIFRX interrupts.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_IT_RXNE
+ * @arg SPDIFRX_IT_CSRNE
+ * @arg SPDIFRX_IT_PERRIE
+ * @arg SPDIFRX_IT_OVRIE
+ * @arg SPDIFRX_IT_SBLKIE
+ * @arg SPDIFRX_IT_SYNCDIE
+ * @arg SPDIFRX_IT_IFEIE
+ * @retval None
+ */
+#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __INTERRUPT__: specifies the SPDIFRX interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_IT_RXNE
+ * @arg SPDIFRX_IT_CSRNE
+ * @arg SPDIFRX_IT_PERRIE
+ * @arg SPDIFRX_IT_OVRIE
+ * @arg SPDIFRX_IT_SBLKIE
+ * @arg SPDIFRX_IT_SYNCDIE
+ * @arg SPDIFRX_IT_IFEIE
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SPDIFRX flag is set or not.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_FLAG_RXNE
+ * @arg SPDIFRX_FLAG_CSRNE
+ * @arg SPDIFRX_FLAG_PERR
+ * @arg SPDIFRX_FLAG_OVR
+ * @arg SPDIFRX_FLAG_SBD
+ * @arg SPDIFRX_FLAG_SYNCD
+ * @arg SPDIFRX_FLAG_FERR
+ * @arg SPDIFRX_FLAG_SERR
+ * @arg SPDIFRX_FLAG_TERR
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_FLAG_PERR
+ * @arg SPDIFRX_FLAG_OVR
+ * @arg SPDIFRX_SR_SBD
+ * @arg SPDIFRX_SR_SYNCD
+ * @retval None
+ */
+#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPDIFRX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat);
+/**
+ * @}
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+/**
+ * @}
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif);
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros
+ * @{
+ */
+#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \
+ ((INPUT) == SPDIFRX_INPUT_IN2) || \
+ ((INPUT) == SPDIFRX_INPUT_IN3) || \
+ ((INPUT) == SPDIFRX_INPUT_IN0))
+#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \
+ ((RET) == SPDIFRX_MAXRETRIES_3) || \
+ ((RET) == SPDIFRX_MAXRETRIES_15) || \
+ ((RET) == SPDIFRX_MAXRETRIES_63))
+#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \
+ ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF))
+#define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \
+ ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF))
+#define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \
+ ((VAL) == SPDIFRX_VALIDITYMASK_ON))
+#define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \
+ ((VAL) == SPDIFRX_PARITYERRORMASK_ON))
+#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \
+ ((CHANNEL) == SPDIFRX_CHANNEL_B))
+#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \
+ ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \
+ ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS))
+#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \
+ ((MODE) == SPDIFRX_STEREOMODE_ENABLE))
+
+#define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \
+ ((VAL) == SPDIFRX_CHANNELSTATUS_OFF))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_SPDIFRX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2790 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spi.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SPI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Serial Peripheral Interface (SPI) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The SPI HAL driver can be used as follows:
+
+ (#) Declare a SPI_HandleTypeDef handle structure, for example:
+ SPI_HandleTypeDef hspi;
+
+ (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API:
+ (##) Enable the SPIx interface clock
+ (##) SPI pins configuration
+ (+++) Enable the clock for the SPI GPIOs
+ (+++) Configure these SPI pins as alternate function push-pull
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the SPIx interrupt priority
+ (+++) Enable the NVIC SPI IRQ handle
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+ (+++) Enable the DMAx clock
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx stream
+ (+++) Associate the initialized hdma_tx handle to the hspi DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx stream
+
+ (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS
+ management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure.
+
+ (#) Initialize the SPI registers by calling the HAL_SPI_Init() API:
+ (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customized HAL_SPI_MspInit() API.
+ [..]
+ Circular mode restriction:
+ (#) The DMA circular mode cannot be used when the SPI is configured in these modes:
+ (##) Master 2Lines RxOnly
+ (##) Master 1Line Rx
+ (#) The CRC feature is not managed when the DMA circular mode is enabled
+ (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs
+ the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks
+ [..]
+ Master Receive mode restriction:
+ (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=0) or
+ bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI
+ does not initiate a new transfer the following procedure has to be respected:
+ (##) HAL_SPI_DeInit()
+ (##) HAL_SPI_Init()
+ [..]
+ Using the HAL it is not possible to reach all supported SPI frequency with the differents SPI Modes,
+ the following table resume the max SPI frequency reached with data size 8bits/16bits,
+ according to frequency used on APBx Peripheral Clock (fPCLK) used by the SPI instance :
+
+ DataSize = SPI_DATASIZE_8BIT:
+ +----------------------------------------------------------------------------------------------+
+ | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line |
+ | Process | Tranfert mode |---------------------|----------------------|----------------------|
+ | | | Master | Slave | Master | Slave | Master | Slave |
+ |==============================================================================================|
+ | T | Polling | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | / | Interrupt | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA |
+ | R |----------------|----------|----------|-----------|----------|-----------|----------|
+ | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | R | Interrupt | Fpclk/8 | Fpclk/8 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/128 | Fpclk/2 |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/2 | Fpclk/64 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/2 | Fpclk/64 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/128|
+ +----------------------------------------------------------------------------------------------+
+
+ DataSize = SPI_DATASIZE_16BIT:
+ +----------------------------------------------------------------------------------------------+
+ | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line |
+ | Process | Tranfert mode |---------------------|----------------------|----------------------|
+ | | | Master | Slave | Master | Slave | Master | Slave |
+ |==============================================================================================|
+ | T | Polling | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | / | Interrupt | Fpclk/4 | Fpclk/4 | NA | NA | NA | NA |
+ | R |----------------|----------|----------|-----------|----------|-----------|----------|
+ | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/32 | Fpclk/2 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | R | Interrupt | Fpclk/4 | Fpclk/4 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/128 | Fpclk/2 |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/32 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | T | Interrupt | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/64 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/128|
+ +----------------------------------------------------------------------------------------------+
+ @note The max SPI frequency depend on SPI data size (8bits, 16bits),
+ SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA).
+ @note
+ (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA()
+ (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA()
+ (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup SPI SPI
+ * @brief SPI HAL module driver
+ * @{
+ */
+#ifdef HAL_SPI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SPI_Private_Constants SPI Private Constants
+ * @{
+ */
+#define SPI_DEFAULT_TIMEOUT 100U
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SPI_Private_Functions
+ * @{
+ */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAError(DMA_HandleTypeDef *hdma);
+static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, uint32_t State, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef SPI_WaitTXEFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart);
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+#if (USE_SPI_CRC != 0U)
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+#endif /* USE_SPI_CRC */
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi);
+static HAL_StatusTypeDef SPI_CheckFlag_BSY(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Functions SPI Exported Functions
+ * @{
+ */
+
+/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the SPIx peripheral:
+
+ (+) User must implement HAL_SPI_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_SPI_Init() to configure the selected device with
+ the selected configuration:
+ (++) Mode
+ (++) Direction
+ (++) Data Size
+ (++) Clock Polarity and Phase
+ (++) NSS Management
+ (++) BaudRate Prescaler
+ (++) FirstBit
+ (++) TIMode
+ (++) CRC Calculation
+ (++) CRC Polynomial if CRC enabled
+
+ (+) Call the function HAL_SPI_DeInit() to restore the default configuration
+ of the selected SPIx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the SPI according to the specified parameters
+ * in the SPI_InitTypeDef and initialize the associated handle.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
+{
+ /* Check the SPI handle allocation */
+ if(hspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+ assert_param(IS_SPI_MODE(hspi->Init.Mode));
+ assert_param(IS_SPI_DIRECTION(hspi->Init.Direction));
+ assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
+ assert_param(IS_SPI_NSS(hspi->Init.NSS));
+ assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+ assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
+ assert_param(IS_SPI_TIMODE(hspi->Init.TIMode));
+ if(hspi->Init.TIMode == SPI_TIMODE_DISABLE)
+ {
+ assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
+ assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
+ }
+#if (USE_SPI_CRC != 0U)
+ assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
+ }
+#else
+ hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+#endif /* USE_SPI_CRC */
+
+ if(hspi->State == HAL_SPI_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hspi->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_SPI_MspInit(hspi);
+ }
+
+ hspi->State = HAL_SPI_STATE_BUSY;
+
+ /* Disable the selected SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+
+ /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/
+ /* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management,
+ Communication speed, First bit and CRC calculation state */
+ WRITE_REG(hspi->Instance->CR1, (hspi->Init.Mode | hspi->Init.Direction | hspi->Init.DataSize |
+ hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) |
+ hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit | hspi->Init.CRCCalculation) );
+
+ /* Configure : NSS management */
+ WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | hspi->Init.TIMode));
+
+#if (USE_SPI_CRC != 0U)
+ /*---------------------------- SPIx CRCPOLY Configuration ------------------*/
+ /* Configure : CRC Polynomial */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ WRITE_REG(hspi->Instance->CRCPR, hspi->Init.CRCPolynomial);
+ }
+#endif /* USE_SPI_CRC */
+
+#if defined(SPI_I2SCFGR_I2SMOD)
+ /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */
+ CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD);
+#endif /* USE_SPI_CRC */
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->State = HAL_SPI_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De Initialize the SPI peripheral.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi)
+{
+ /* Check the SPI handle allocation */
+ if(hspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check SPI Instance parameter */
+ assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+
+ hspi->State = HAL_SPI_STATE_BUSY;
+
+ /* Disable the SPI Peripheral Clock */
+ __HAL_SPI_DISABLE(hspi);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_SPI_MspDeInit(hspi);
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->State = HAL_SPI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the SPI MSP.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_MspInit should be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-Initialize the SPI MSP.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_MspDeInit should be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SPI
+ data transfers.
+
+ [..] The SPI supports master and slave mode :
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
+ will be executed respectively at the end of the transmit or Receive process
+ The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected
+
+ (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA)
+ exist for 1Line (simplex) and 2Lines (full duplex) modes.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit an amount of data in blocking mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL ) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->pRxBuffPtr = (uint8_t *)NULL;
+ hspi->RxXferSize = 0U;
+ hspi->RxXferCount = 0U;
+ hspi->TxISR = NULL;
+ hspi->RxISR = NULL;
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_TX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Transmit data in 16 Bit mode */
+ if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01))
+ {
+ hspi->Instance->DR = *((uint16_t *)pData);
+ pData += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ /* Transmit data in 16 Bit mode */
+ while (hspi->TxXferCount > 0U)
+ {
+ /* Wait until TXE flag is set to send data */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE))
+ {
+ hspi->Instance->DR = *((uint16_t *)pData);
+ pData += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0U) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+ /* Transmit data in 8 Bit mode */
+ else
+ {
+ if((hspi->Init.Mode == SPI_MODE_SLAVE)|| (hspi->TxXferCount == 0x01))
+ {
+ *((__IO uint8_t*)&hspi->Instance->DR) = (*pData);
+ pData += sizeof(uint8_t);
+ hspi->TxXferCount--;
+ }
+ while (hspi->TxXferCount > 0U)
+ {
+ /* Wait until TXE flag is set to send data */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE))
+ {
+ *((__IO uint8_t*)&hspi->Instance->DR) = (*pData);
+ pData += sizeof(uint8_t);
+ hspi->TxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0U) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+
+ /* Wait until TXE flag */
+ if(SPI_WaitTXEFlagStateUntilTimeout(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Check Busy flag */
+ if(SPI_CheckFlag_BSY(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ errorcode = HAL_ERROR;
+ hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+ goto error;
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ errorcode = HAL_ERROR;
+ }
+
+error:
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+#if (USE_SPI_CRC != 0U)
+ __IO uint16_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
+ uint32_t tickstart = 0U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+ return HAL_SPI_TransmitReceive(hspi,pData,pData,Size,Timeout);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL ) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->pTxBuffPtr = (uint8_t *)NULL;
+ hspi->TxXferSize = 0U;
+ hspi->TxXferCount = 0U;
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ /* this is done to handle the CRCNEXT before the latest data */
+ hspi->RxXferCount--;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Configure communication direction: 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_RX(hspi);
+ }
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Receive data in 8 Bit mode */
+ if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+ {
+ /* Transfer loop */
+ while(hspi->RxXferCount > 0U)
+ {
+ /* Check the RXNE flag */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE))
+ {
+ /* read the received data */
+ (* (uint8_t *)pData)= *(__IO uint8_t *)&hspi->Instance->DR;
+ pData += sizeof(uint8_t);
+ hspi->RxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0U) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+ else
+ {
+ /* Transfer loop */
+ while(hspi->RxXferCount > 0U)
+ {
+ /* Check the RXNE flag */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE))
+ {
+ *((uint16_t*)pData) = hspi->Instance->DR;
+ pData += sizeof(uint16_t);
+ hspi->RxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if((Timeout == 0U) || ((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout)))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Handle the CRC Transmission */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* freeze the CRC before the latest data */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+
+ /* Read the latest data */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* the latest data has not been received */
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Receive last data in 16 Bit mode */
+ if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ *((uint16_t*)pData) = hspi->Instance->DR;
+ }
+ /* Receive last data in 8 Bit mode */
+ else
+ {
+ (*(uint8_t *)pData) = *(__IO uint8_t *)&hspi->Instance->DR;
+ }
+
+ /* Wait the CRC data */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Read CRC to Flush DR and RXNE flag */
+ tmpreg = hspi->Instance->DR;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+ }
+#endif /* USE_SPI_CRC */
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ errorcode = HAL_ERROR;
+ }
+
+error :
+ hspi->State = HAL_SPI_STATE_READY;
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in blocking mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData: pointer to transmission data buffer
+ * @param pRxData: pointer to reception data buffer
+ * @param Size: amount of data to be sent and received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tmp = 0U, tmp1 = 0U;
+#if (USE_SPI_CRC != 0U)
+ __IO uint16_t tmpreg1 = 0U;
+#endif /* USE_SPI_CRC */
+ uint32_t tickstart = 0U;
+ /* Variable used to alternate Rx and Tx during transfer */
+ uint32_t txallowed = 1U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ tmp = hspi->State;
+ tmp1 = hspi->Init.Mode;
+
+ if(!((tmp == HAL_SPI_STATE_READY) || \
+ ((tmp1 == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if(hspi->State == HAL_SPI_STATE_READY)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pRxData;
+ hspi->RxXferCount = Size;
+ hspi->RxXferSize = Size;
+ hspi->pTxBuffPtr = (uint8_t *)pTxData;
+ hspi->TxXferCount = Size;
+ hspi->TxXferSize = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Transmit and Receive data in 16 Bit mode */
+ if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01))
+ {
+ hspi->Instance->DR = *((uint16_t *)pTxData);
+ pTxData += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
+ {
+ /* Check TXE flag */
+ if(txallowed && (hspi->TxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)))
+ {
+ hspi->Instance->DR = *((uint16_t *)pTxData);
+ pTxData += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ /* Next Data is a reception (Rx). Tx not allowed */
+ txallowed = 0U;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ }
+
+ /* Check RXNE flag */
+ if((hspi->RxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)))
+ {
+ *((uint16_t *)pRxData) = hspi->Instance->DR;
+ pRxData += sizeof(uint16_t);
+ hspi->RxXferCount--;
+ /* Next Data is a Transmission (Tx). Tx is allowed */
+ txallowed = 1U;
+ }
+ if((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ /* Transmit and Receive data in 8 Bit mode */
+ else
+ {
+ if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01))
+ {
+ *((__IO uint8_t*)&hspi->Instance->DR) = (*pTxData);
+ pTxData += sizeof(uint8_t);
+ hspi->TxXferCount--;
+ }
+ while((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
+ {
+ /* check TXE flag */
+ if(txallowed && (hspi->TxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)))
+ {
+ *(__IO uint8_t *)&hspi->Instance->DR = (*pTxData++);
+ hspi->TxXferCount--;
+ /* Next Data is a reception (Rx). Tx not allowed */
+ txallowed = 0U;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ }
+
+ /* Wait until RXNE flag is reset */
+ if((hspi->RxXferCount > 0U) && (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)))
+ {
+ (*(uint8_t *)pRxData++) = hspi->Instance->DR;
+ hspi->RxXferCount--;
+ /* Next Data is a Transmission (Tx). Tx is allowed */
+ txallowed = 1U;
+ }
+ if((Timeout != HAL_MAX_DELAY) && ((HAL_GetTick()-tickstart) >= Timeout))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Read CRC from DR to close CRC calculation process */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Wait until TXE flag */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Error on the CRC reception */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ /* Read CRC */
+ tmpreg1 = hspi->Instance->DR;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg1);
+ }
+
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ /* Clear CRC Flag */
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+
+ errorcode = HAL_ERROR;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Wait until TXE flag */
+ if(SPI_WaitTXEFlagStateUntilTimeout(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Check Busy flag */
+ if(SPI_CheckFlag_BSY(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ errorcode = HAL_ERROR;
+ hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+ goto error;
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+error :
+ hspi->State = HAL_SPI_STATE_READY;
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->pRxBuffPtr = (uint8_t *)NULL;
+ hspi->RxXferSize = 0U;
+ hspi->RxXferCount = 0U;
+ hspi->RxISR = NULL;
+
+ /* Set the function for IT treatment */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+ {
+ hspi->TxISR = SPI_TxISR_16BIT;
+ }
+ else
+ {
+ hspi->TxISR = SPI_TxISR_8BIT;
+ }
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_TX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ /* Enable TXE interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE));
+ }
+ else
+ {
+ /* Enable TXE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+ }
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ if((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+ return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->pTxBuffPtr = (uint8_t *)NULL;
+ hspi->TxXferSize = 0U;
+ hspi->TxXferCount = 0U;
+ hspi->TxISR = NULL;
+
+ /* Set the function for IT treatment */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+ {
+ hspi->RxISR = SPI_RxISR_16BIT;
+ }
+ else
+ {
+ hspi->RxISR = SPI_RxISR_8BIT;
+ }
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_RX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Note : The SPI must be enabled after unlocking current process
+ to avoid the risk of SPI interrupt handle execution before current
+ process unlock */
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData: pointer to transmission data buffer
+ * @param pRxData: pointer to reception data buffer
+ * @param Size: amount of data to be sent and received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t tmp = 0U, tmp1 = 0U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ tmp = hspi->State;
+ tmp1 = hspi->Init.Mode;
+
+ if(!((tmp == HAL_SPI_STATE_READY) || \
+ ((tmp1 == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if(hspi->State == HAL_SPI_STATE_READY)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pTxData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t *)pRxData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Set the function for IT treatment */
+ if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+ {
+ hspi->RxISR = SPI_2linesRxISR_16BIT;
+ hspi->TxISR = SPI_2linesTxISR_16BIT;
+ }
+ else
+ {
+ hspi->RxISR = SPI_2linesRxISR_8BIT;
+ hspi->TxISR = SPI_2linesTxISR_8BIT;
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Enable TXE, RXNE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with DMA.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->pRxBuffPtr = (uint8_t *)NULL;
+ hspi->TxISR = NULL;
+ hspi->RxISR = NULL;
+ hspi->RxXferSize = 0U;
+ hspi->RxXferCount = 0U;
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_TX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Set the SPI TxDMA Half transfer complete callback */
+ hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt;
+
+ /* Set the SPI TxDMA transfer complete callback */
+ hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt;
+
+ /* Set the DMA error callback */
+ hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the Tx DMA Stream */
+ HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Enable the SPI Error Interrupt Bit */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+ /* Enable Tx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with DMA.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData: pointer to data buffer
+ * @note When the CRC feature is enabled the pData Length must be Size + 1.
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER))
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+ return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if(hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+ hspi->TxXferSize = 0U;
+ hspi->TxXferCount = 0U;
+
+ /* Configure communication direction : 1Line */
+ if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ SPI_1LINE_RX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Set the SPI RxDMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+ /* Set the SPI Rx DMA transfer complete callback */
+ hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+
+ /* Set the DMA error callback */
+ hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the Rx DMA Stream */
+ HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Enable the SPI Error Interrupt Bit */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+ /* Enable Rx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+error:
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in non-blocking mode with DMA.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData: pointer to transmission data buffer
+ * @param pRxData: pointer to reception data buffer
+ * @note When the CRC feature is enabled the pRxData Length must be Size + 1
+ * @param Size: amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t tmp = 0U, tmp1 = 0U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ tmp = hspi->State;
+ tmp1 = hspi->Init.Mode;
+ if(!((tmp == HAL_SPI_STATE_READY) ||
+ ((tmp1 == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if(hspi->State == HAL_SPI_STATE_READY)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t*)pTxData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t*)pRxData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */
+ if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+ {
+ /* Set the SPI Rx DMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+ hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+ }
+ else
+ {
+ /* Set the SPI Tx/Rx DMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
+ hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+ }
+
+ /* Set the DMA error callback */
+ hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the Rx DMA Stream */
+ HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+
+ /* Enable Rx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+ /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
+ is performed in DMA reception complete callback */
+ hspi->hdmatx->XferHalfCpltCallback = NULL;
+ hspi->hdmatx->XferCpltCallback = NULL;
+ hspi->hdmatx->XferErrorCallback = NULL;
+ hspi->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the Tx DMA Stream */
+ HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+ /* Check if the SPI is already enabled */
+ if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+ /* Enable the SPI Error Interrupt Bit */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+ /* Enable Tx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Stop the DMA Transfer.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi)
+{
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback()
+ */
+
+ /* Abort the SPI DMA tx Stream */
+ if(hspi->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(hspi->hdmatx);
+ }
+ /* Abort the SPI DMA rx Stream */
+ if(hspi->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(hspi->hdmarx);
+ }
+
+ /* Disable the SPI DMA Tx & Rx requests */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+ hspi->State = HAL_SPI_STATE_READY;
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle SPI interrupt request.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval None
+ */
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi)
+{
+ uint32_t itsource = hspi->Instance->CR2;
+ uint32_t itflag = hspi->Instance->SR;
+
+ /* SPI in mode Receiver ----------------------------------------------------*/
+ if(((itflag & SPI_FLAG_OVR) == RESET) &&
+ ((itflag & SPI_FLAG_RXNE) != RESET) && ((itsource & SPI_IT_RXNE) != RESET))
+ {
+ hspi->RxISR(hspi);
+ return;
+ }
+
+ /* SPI in mode Transmitter -------------------------------------------------*/
+ if(((itflag & SPI_FLAG_TXE) != RESET) && ((itsource & SPI_IT_TXE) != RESET))
+ {
+ hspi->TxISR(hspi);
+ return;
+ }
+
+ /* SPI in Error Treatment --------------------------------------------------*/
+ if(((itflag & (SPI_FLAG_MODF | SPI_FLAG_OVR | SPI_FLAG_FRE)) != RESET) && ((itsource & SPI_IT_ERR) != RESET))
+ {
+ /* SPI Overrun error interrupt occurred ----------------------------------*/
+ if((itflag & SPI_FLAG_OVR) != RESET)
+ {
+ if(hspi->State != HAL_SPI_STATE_BUSY_TX)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR);
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+ else
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ return;
+ }
+ }
+
+ /* SPI Mode Fault error interrupt occurred -------------------------------*/
+ if((itflag & SPI_FLAG_MODF) != RESET)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF);
+ __HAL_SPI_CLEAR_MODFFLAG(hspi);
+ }
+
+ /* SPI Frame error interrupt occurred ------------------------------------*/
+ if((itflag & SPI_FLAG_FRE) != RESET)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE);
+ __HAL_SPI_CLEAR_FREFLAG(hspi);
+ }
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ /* Disable all interrupts */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR);
+
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Disable the SPI DMA requests if enabled */
+ if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN))||(HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN)))
+ {
+ CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN));
+
+ /* Abort the SPI DMA Rx channel */
+ if(hspi->hdmarx != NULL)
+ {
+ /* Set the SPI DMA Abort callback :
+ will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */
+ hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError;
+ HAL_DMA_Abort_IT(hspi->hdmarx);
+ }
+ /* Abort the SPI DMA Tx channel */
+ if(hspi->hdmatx != NULL)
+ {
+ /* Set the SPI DMA Abort callback :
+ will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */
+ hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError;
+ HAL_DMA_Abort_IT(hspi->hdmatx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ }
+ return;
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_RxCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx and Rx Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxRxCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxHalfCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx and Rx Half Transfer callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file
+ */
+}
+
+/**
+ * @brief SPI error callback.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+ __weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_ErrorCallback should be implemented in the user file
+ */
+ /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes
+ and user can use HAL_SPI_GetError() API to check the latest error occurred
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief SPI control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SPI.
+ (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral
+ (+) HAL_SPI_GetError() check in run-time Errors occurring during communication
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the SPI handle state.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval SPI state
+ */
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi)
+{
+ /* Return SPI handle state */
+ return hspi->State;
+}
+
+/**
+ * @brief Return the SPI error code.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval SPI error code in bitmap format
+ */
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi)
+{
+ /* Return SPI ErrorCode */
+ return hspi->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Private_Functions
+ * @brief Private functions
+ * @{
+ */
+
+/**
+ * @brief DMA SPI transmit process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ uint32_t tickstart = 0U;
+
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ /* DMA Normal Mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ /* Disable Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+ /* Check the end of the transaction */
+ if(SPI_CheckFlag_BSY(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received data is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ hspi->TxXferCount = 0U;
+ hspi->State = HAL_SPI_STATE_READY;
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+ }
+ HAL_SPI_TxCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI receive process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+#if (USE_SPI_CRC != 0U)
+ uint32_t tickstart = 0U;
+ __IO uint16_t tmpreg = 0U;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+#endif /* USE_SPI_CRC */
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ /* CRC handling */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Wait until RXNE flag */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ /* Error on the CRC reception */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ }
+ /* Read CRC */
+ tmpreg = hspi->Instance->DR;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ hspi->RxXferCount = 0U;
+ hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+ }
+ HAL_SPI_RxCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI transmit receive process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ uint32_t tickstart = 0U;
+#if (USE_SPI_CRC != 0U)
+ __IO int16_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ /* CRC handling */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Wait the CRC data */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ }
+ /* Read CRC to Flush DR and RXNE flag */
+ tmpreg = hspi->Instance->DR;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+ }
+#endif /* USE_SPI_CRC */
+ /* Check the end of the transaction */
+ if(SPI_CheckFlag_BSY(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Disable Rx/Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ hspi->TxXferCount = 0U;
+ hspi->RxXferCount = 0U;
+ hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ return;
+ }
+ }
+ HAL_SPI_TxRxCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI half transmit process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_SPI_TxHalfCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI half receive process complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_SPI_RxHalfCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI half transmit receive process complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_SPI_TxRxHalfCpltCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI communication error callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = (SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+/* Stop the disable DMA transfer on SPI side */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_ErrorCallback(hspi);
+}
+
+/**
+ * @brief DMA SPI communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ hspi->RxXferCount = 0;
+ hspi->TxXferCount = 0;
+
+ HAL_SPI_ErrorCallback(hspi);
+}
+
+/**
+ * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 8bit mode */
+ *hspi->pRxBuffPtr++ = *((__IO uint8_t *)&hspi->Instance->DR);
+ hspi->RxXferCount--;
+
+ /* check end of the reception */
+ if(hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_2linesRxISR_8BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ if(hspi->TxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ __IO uint8_t tmpreg = 0U;
+
+ /* Read data register to flush CRC */
+ tmpreg = *((__IO uint8_t *)&hspi->Instance->DR);
+
+ /* To avoid GCC warning */
+
+ UNUSED(tmpreg);
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ if(hspi->TxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+ hspi->TxXferCount--;
+
+ /* check the end of the transmission */
+ if(hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+ if(hspi->RxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+/**
+ * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 16 Bit mode */
+ *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+
+ if(hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_2linesRxISR_16BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ if(hspi->TxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 16 Bit mode */
+ __IO uint16_t tmpreg = 0U;
+
+ /* Read data register to flush CRC */
+ tmpreg = hspi->Instance->DR;
+
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ SPI_CloseRxTx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Transmit data in 16 Bit mode */
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+
+ /* Enable CRC Transmission */
+ if(hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+ if(hspi->RxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Manage the CRC 8-bit receive in Interrupt context.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ __IO uint8_t tmpreg = 0U;
+
+ /* Read data register to flush CRC */
+ tmpreg = *((__IO uint8_t*)&hspi->Instance->DR);
+
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+
+ SPI_CloseRx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Manage the receive 8-bit in Interrupt context.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *hspi->pRxBuffPtr++ = (*(__IO uint8_t *)&hspi->Instance->DR);
+ hspi->RxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_RxISR_8BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseRx_ISR(hspi);
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Manage the CRC 16-bit receive in Interrupt context.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ __IO uint16_t tmpreg = 0U;
+
+ /* Read data register to flush CRC */
+ tmpreg = hspi->Instance->DR;
+
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
+
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ SPI_CloseRx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Manage the 16-bit receive in Interrupt context.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *((uint16_t *)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+
+ if(hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_RxISR_16BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseRx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle the data 8-bit transmit in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+ hspi->TxXferCount--;
+
+ if(hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Enable CRC Transmission */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseTx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle the data 16-bit transmit in Interrupt mode.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Transmit data in 16 Bit mode */
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+
+ if(hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Enable CRC Transmission */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseTx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle SPI Communication Timeout.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Flag: SPI flag to check
+ * @param State: flag state to check
+ * @param Timeout: Timeout duration
+ * @param Tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, uint32_t State, uint32_t Timeout, uint32_t Tickstart)
+{
+ while((hspi->Instance->SR & Flag) != State)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) >= Timeout))
+ {
+ /* Disable the SPI and reset the CRC: the CRC value should be cleared
+ on both master and slave sides in order to resynchronize the master
+ and slave for their respective CRC calculation */
+
+ /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+
+ hspi->State= HAL_SPI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle SPI Communication Timeout.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Flag: SPI TXE flag to check
+ * @param State: flag state to check
+ * @param Timeout: Timeout duration
+ * @param Tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_WaitTXEFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart)
+{
+ while((hspi->Instance->SR & SPI_FLAG_TXE) == RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) >= Timeout))
+ {
+ /* Disable the SPI and reset the CRC: the CRC value should be cleared
+ on both master and slave sides in order to resynchronize the master
+ and slave for their respective CRC calculation */
+
+ /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+
+ hspi->State= HAL_SPI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle to check BSY flag before start a new transaction.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Timeout: Timeout duration
+ * @param Tickstart: tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_CheckFlag_BSY(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Control the BSY flag */
+ if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ return HAL_TIMEOUT;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle the end of the RXTX transaction.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi)
+{
+ uint32_t tickstart = 0U;
+ __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24 / 1000);
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ /* Disable ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+ /* Wait until TXE flag is set */
+ do
+ {
+ if(count-- == 0)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ break;
+ }
+ }
+ while((hspi->Instance->SR & SPI_FLAG_TXE) == RESET);
+
+ /* Check the end of the transaction */
+ if(SPI_CheckFlag_BSY(hspi, SPI_DEFAULT_TIMEOUT, tickstart)!=HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ else
+ {
+#endif /* USE_SPI_CRC */
+ if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+ {
+ if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_RxCpltCallback(hspi);
+ }
+ else
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_TxRxCpltCallback(hspi);
+ }
+ }
+ else
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ HAL_SPI_ErrorCallback(hspi);
+ }
+#if (USE_SPI_CRC != 0U)
+ }
+#endif /* USE_SPI_CRC */
+}
+
+/**
+ * @brief Handle the end of the RX transaction.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi)
+{
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Check the end of the transaction */
+ if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+ hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ else
+ {
+#endif /* USE_SPI_CRC */
+ if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_RxCpltCallback(hspi);
+ }
+ else
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ }
+#if (USE_SPI_CRC != 0U)
+ }
+#endif /* USE_SPI_CRC */
+}
+
+/**
+ * @brief Handle the end of the TX transaction.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi)
+{
+ uint32_t tickstart = 0U;
+ __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24 / 1000);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* Wait until TXE flag is set */
+ do
+ {
+ if(count-- == 0)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ break;
+ }
+ }
+ while((hspi->Instance->SR & SPI_FLAG_TXE) == RESET);
+
+ /* Disable TXE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+
+ /* Check Busy flag */
+ if(SPI_CheckFlag_BSY(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ hspi->State = HAL_SPI_STATE_READY;
+ if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ HAL_SPI_ErrorCallback(hspi);
+ }
+ else
+ {
+ HAL_SPI_TxCpltCallback(hspi);
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_spi.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,583 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPI_H
+#define __STM32F4xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_Mode */
+
+ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
+ This parameter can be a value of @ref SPI_Direction */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_Data_Size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+}SPI_InitTypeDef;
+
+/**
+ * @brief HAL SPI State structure definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06U /*!< SPI error state */
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /* SPI registers base address */
+
+ SPI_InitTypeDef Init; /* SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SPI Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SPI Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
+
+ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_SPI_StateTypeDef State; /* SPI communication state */
+
+ __IO uint32_t ErrorCode; /* SPI Error code */
+
+}SPI_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_Error_Code SPI Error Code
+ * @{
+ */
+#define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001U) /*!< MODF error */
+#define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002U) /*!< CRC error */
+#define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004U) /*!< OVR error */
+#define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008U) /*!< FRE error */
+#define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020U) /*!< Flag: RXNE,TXE, BSY */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Mode SPI Mode
+ * @{
+ */
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000U)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction SPI Direction Mode
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000U)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Data_Size SPI Data Size
+ * @{
+ */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000U)
+#define SPI_DATASIZE_16BIT SPI_CR1_DFF
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000U)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000U)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000U)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000U)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008U)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010U)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018U)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020U)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028U)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030U)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000U)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode SPI TI Mode
+ * @{
+ */
+#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000U)
+#define SPI_TIMODE_ENABLE SPI_CR2_FRF
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000U)
+#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Flags_definition SPI Flags Definition
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPI handle state.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI interrupts.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified SPI interrupt source is enabled or not.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the SPI CRCERR pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
+
+/** @brief Clear the SPI MODF pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_modf = 0x00U; \
+ tmpreg_modf = (__HANDLE__)->Instance->SR; \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \
+ UNUSED(tmpreg_modf); \
+ } while(0)
+
+/** @brief Clear the SPI OVR pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_ovr = 0x00U; \
+ tmpreg_ovr = (__HANDLE__)->Instance->DR; \
+ tmpreg_ovr = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_ovr); \
+ } while(0)
+
+/** @brief Clear the SPI FRE pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_fre = 0x00U; \
+ tmpreg_fre = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_fre); \
+ }while(0)
+
+/** @brief Enable the SPI peripheral.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
+
+/** @brief Disable the SPI peripheral.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+ * @{
+ */
+
+/** @brief Set the SPI transmit-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+/** @brief Set the SPI receive-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
+
+/** @brief Reset the CRC calculation of the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+
+#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT))
+
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \
+ ((MODE) == SPI_TIMODE_ENABLE))
+
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLE))
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x01U) && ((POLYNOMIAL) <= 0xFFFFU))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPI_Private_Functions SPI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,693 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sram.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SRAM HAL module driver.
+ * This file provides a generic firmware to drive SRAM memories
+ * mounted as external device.
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a generic layered driver which contains a set of APIs used to
+ control SRAM memories. It uses the FMC layer functions to interface
+ with SRAM devices.
+ The following sequence should be followed to configure the FMC/FSMC to interface
+ with SRAM/PSRAM memories:
+
+ (#) Declare a SRAM_HandleTypeDef handle structure, for example:
+ SRAM_HandleTypeDef hsram; and:
+
+ (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed
+ values of the structure member.
+
+ (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined
+ base register instance for NOR or SRAM device
+
+ (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined
+ base register instance for NOR or SRAM extended mode
+
+ (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended
+ mode timings; for example:
+ FMC_NORSRAM_TimingTypeDef Timing and FMC_NORSRAM_TimingTypeDef ExTiming;
+ and fill its fields with the allowed values of the structure member.
+
+ (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function
+ performs the following sequence:
+
+ (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit()
+ (##) Control register configuration using the FMC NORSRAM interface function
+ FMC_NORSRAM_Init()
+ (##) Timing register configuration using the FMC NORSRAM interface function
+ FMC_NORSRAM_Timing_Init()
+ (##) Extended mode Timing register configuration using the FMC NORSRAM interface function
+ FMC_NORSRAM_Extended_Timing_Init()
+ (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE()
+
+ (#) At this stage you can perform read/write accesses from/to the memory connected
+ to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the
+ following APIs:
+ (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access
+ (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer
+
+ (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/
+ HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation
+
+ (#) You can continuously monitor the SRAM device HAL state by calling the function
+ HAL_SRAM_GetState()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SRAM SRAM
+ * @brief SRAM driver modules
+ * @{
+ */
+#ifdef HAL_SRAM_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SRAM_Exported_Functions SRAM Exported Functions
+ * @{
+ */
+/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SRAM Initialization and de_initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to initialize/de-initialize
+ the SRAM memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Performs the SRAM device initialization sequence
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param Timing: Pointer to SRAM control timing structure
+ * @param ExtTiming: Pointer to SRAM extended mode timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{
+ /* Check the SRAM handle parameter */
+ if(hsram == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(hsram->State == HAL_SRAM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hsram->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_SRAM_MspInit(hsram);
+ }
+
+ /* Initialize SRAM control Interface */
+ FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init));
+
+ /* Initialize SRAM timing Interface */
+ FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank);
+
+ /* Initialize SRAM extended mode timing Interface */
+ FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, hsram->Init.ExtendedMode);
+
+ /* Enable the NORSRAM device */
+ __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Performs the SRAM device De-initialization sequence.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram)
+{
+ /* De-Initialize the low level hardware (MSP) */
+ HAL_SRAM_MspDeInit(hsram);
+
+ /* Configure the SRAM registers with their reset values */
+ FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);
+
+ hsram->State = HAL_SRAM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief SRAM MSP Init.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval None
+ */
+__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsram);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SRAM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SRAM MSP DeInit.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval None
+ */
+__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsram);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SRAM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA transfer complete callback.
+ * @param hdma: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval None
+ */
+__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA transfer complete error callback.
+ * @param hdma: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval None
+ */
+__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SRAM_Exported_Functions_Group2 Input and Output functions
+ * @brief Input Output and memory control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SRAM Input and Output functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to use and control the SRAM memory
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads 8-bit buffer from SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint8_t * pSramAddress = (uint8_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Read data from memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint8_t *)pSramAddress;
+ pDstBuffer++;
+ pSramAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 8-bit buffer to SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint8_t * pSramAddress = (uint8_t *)pAddress;
+
+ /* Check the SRAM controller state */
+ if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint8_t *)pSramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSramAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads 16-bit buffer from SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
+{
+ __IO uint16_t * pSramAddress = (uint16_t *)pAddress;
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Read data from memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint16_t *)pSramAddress;
+ pDstBuffer++;
+ pSramAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 16-bit buffer to SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
+{
+ __IO uint16_t * pSramAddress = (uint16_t *)pAddress;
+
+ /* Check the SRAM controller state */
+ if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint16_t *)pSramAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pSramAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads 32-bit buffer from SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Read data from memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *pDstBuffer = *(__IO uint32_t *)pAddress;
+ pDstBuffer++;
+ pAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes 32-bit buffer to SRAM memory.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+ /* Check the SRAM controller state */
+ if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Write data to memory */
+ for(; BufferSize != 0U; BufferSize--)
+ {
+ *(__IO uint32_t *)pAddress = *pSrcBuffer;
+ pSrcBuffer++;
+ pAddress++;
+ }
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Reads a Words data from the SRAM memory using DMA transfer.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to read start address
+ * @param pDstBuffer: Pointer to destination buffer
+ * @param BufferSize: Size of the buffer to read from memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Configure DMA user callbacks */
+ hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;
+ hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes a Words data buffer to SRAM memory using DMA transfer.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @param pAddress: Pointer to write start address
+ * @param pSrcBuffer: Pointer to source buffer to write
+ * @param BufferSize: Size of the buffer to write to memory
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+ /* Check the SRAM controller state */
+ if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Configure DMA user callbacks */
+ hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;
+ hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SRAM_Exported_Functions_Group3 Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### SRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the SRAM interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically SRAM write operation.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Enable write operation */
+ FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically SRAM write operation.
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram)
+{
+ /* Process Locked */
+ __HAL_LOCK(hsram);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_BUSY;
+
+ /* Disable write operation */
+ FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank);
+
+ /* Update the SRAM controller state */
+ hsram->State = HAL_SRAM_STATE_PROTECTED;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hsram);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SRAM_Exported_Functions_Group4 State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### SRAM State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the SRAM controller
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the SRAM controller state
+ * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
+ * the configuration information for SRAM module.
+ * @retval HAL state
+ */
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram)
+{
+ return hsram->State;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx || STM32F412Cx */
+#endif /* HAL_SRAM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_sram.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,207 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sram.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SRAM_H
+#define __STM32F4xx_HAL_SRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx)
+
+/** @addtogroup SRAM
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Types SRAM Exported Types
+ * @{
+ */
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_SRAM_STATE_RESET = 0x00U, /*!< SRAM not yet initialized or disabled */
+ HAL_SRAM_STATE_READY = 0x01U, /*!< SRAM initialized and ready for use */
+ HAL_SRAM_STATE_BUSY = 0x02U, /*!< SRAM internal process is ongoing */
+ HAL_SRAM_STATE_ERROR = 0x03U, /*!< SRAM error state */
+ HAL_SRAM_STATE_PROTECTED = 0x04U /*!< SRAM peripheral NORSRAM device write protected */
+
+}HAL_SRAM_StateTypeDef;
+
+/**
+ * @brief SRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< SRAM locking object */
+
+ __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SRAM_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Macros SRAM Exported Macros
+ * @{
+ */
+/** @brief Reset SRAM handle state
+ * @param __HANDLE__: SRAM handle
+ * @retval None
+ */
+#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SRAM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
+
+void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group3
+ * @{
+ */
+/* SRAM Control functions ******************************************************/
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group4
+ * @{
+ */
+/* SRAM State functions *********************************************************/
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+ STM32F412Vx || STM32F412Rx */
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,5387 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer (TIM) peripheral:
+ * + Time Base Initialization
+ * + Time Base Start
+ * + Time Base Start Interruption
+ * + Time Base Start DMA
+ * + Time Output Compare/PWM Initialization
+ * + Time Output Compare/PWM Channel Configuration
+ * + Time Output Compare/PWM Start
+ * + Time Output Compare/PWM Start Interruption
+ * + Time Output Compare/PWM Start DMA
+ * + Time Input Capture Initialization
+ * + Time Input Capture Channel Configuration
+ * + Time Input Capture Start
+ * + Time Input Capture Start Interruption
+ * + Time Input Capture Start DMA
+ * + Time One Pulse Initialization
+ * + Time One Pulse Channel Configuration
+ * + Time One Pulse Start
+ * + Time Encoder Interface Initialization
+ * + Time Encoder Interface Start
+ * + Time Encoder Interface Start Interruption
+ * + Time Encoder Interface Start DMA
+ * + Commutation Event configuration with Interruption and DMA
+ * + Time OCRef clear configuration
+ * + Time External Clock configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Generic features #####
+ ==============================================================================
+ [..] The Timer features include:
+ (#) 16-bit up, down, up/down auto-reload counter.
+ (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+ counter clock frequency either by any factor between 1 and 65536.
+ (#) Up to 4 independent channels for:
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Time Base : HAL_TIM_Base_MspInit()
+ (++) Input Capture : HAL_TIM_IC_MspInit()
+ (++) Output Compare : HAL_TIM_OC_MspInit()
+ (++) PWM generation : HAL_TIM_PWM_MspInit()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+ (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+ Output Compare signal.
+ (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+ PWM signal.
+ (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+ external signal.
+ (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+ in One Pulse Mode.
+ (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+ (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+ (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+ (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+ (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+ (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+ (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+ (#) The DMA Burst is managed with the two following functions:
+ HAL_TIM_DMABurst_WriteStart()
+ HAL_TIM_DMABurst_ReadStart()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIM TIM
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+ * @{
+ */
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t TIM_ITRx);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Base functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM base.
+ (+) De-initialize the TIM base.
+ (+) Start the Time Base.
+ (+) Stop the Time Base.
+ (+) Start the Time Base and enable interrupt.
+ (+) Stop the Time Base and disable interrupt.
+ (+) Start the Time Base and enable DMA transfer.
+ (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Time base Unit according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Set the Time Base configuration */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Base peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Base MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Base MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Base generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Enable the TIM Update interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable the TIM Update interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+
+ /* Enable the TIM Update DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Output Compare.
+ (+) De-initialize the TIM Output Compare.
+ (+) Start the Time Output Compare.
+ (+) Stop the Time Output Compare.
+ (+) Start the Time Output Compare and enable interrupt.
+ (+) Stop the Time Output Compare and disable interrupt.
+ (+) Start the Time Output Compare and enable DMA transfer.
+ (+) Stop the Time Output Compare and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Output Compare according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the Output Compare */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Output Compare MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM OPWM.
+ (+) De-initialize the TIM PWM.
+ (+) Start the Time PWM.
+ (+) Stop the Time PWM.
+ (+) Start the Time PWM and enable interrupt.
+ (+) Stop the Time PWM and disable interrupt.
+ (+) Start the Time PWM and enable DMA transfer.
+ (+) Stop the Time PWM and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM PWM Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the PWM */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM PWM MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the PWM signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Capture/Compare 3 request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Input Capture functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Input Capture.
+ (+) De-initialize the TIM Input Capture.
+ (+) Start the Time Input Capture.
+ (+) Stop the Time Input Capture.
+ (+) Start the Time Input Capture and enable interrupt.
+ (+) Stop the Time Input Capture and disable interrupt.
+ (+) Start the Time Input Capture and enable DMA transfer.
+ (+) Stop the Time Input Capture and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Input Capture Time base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the input capture */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM INput Capture MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Input Capture MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement on in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The destination Buffer address.
+ * @param Length: The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement on in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM One Pulse.
+ (+) De-initialize the TIM One Pulse.
+ (+) Start the Time One Pulse.
+ (+) Stop the Time One Pulse.
+ (+) Start the Time One Pulse and enable interrupt.
+ (+) Stop the Time One Pulse and disable interrupt.
+ (+) Start the Time One Pulse and enable DMA transfer.
+ (+) Stop the Time One Pulse and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM One Pulse Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OnePulseMode: Select the One pulse mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+ * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OnePulse_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the One Pulse Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Reset the OPM Bit */
+ htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+ /* Configure the OPM Mode */
+ htim->Instance->CR1 |= OnePulseMode;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM One Pulse
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_OnePulse_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM One Pulse MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel : TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel : TIM Channels to be disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel : TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel : TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Encoder functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Encoder.
+ (+) De-initialize the TIM Encoder.
+ (+) Start the Time Encoder.
+ (+) Stop the Time Encoder.
+ (+) Start the Time Encoder and enable interrupt.
+ (+) Stop the Time Encoder and disable interrupt.
+ (+) Start the Time Encoder and enable DMA transfer.
+ (+) Stop the Time Encoder and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Encoder Interface and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM Encoder Interface configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig)
+{
+ uint32_t tmpsmcr = 0U;
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_Encoder_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Reset the SMS bits */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = htim->Instance->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr |= sConfig->EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+ tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U));
+
+ /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+ tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+ tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+ tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U);
+ tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U);
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+ tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+ tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U);
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Write to TIMx CCMR1 */
+ htim->Instance->CCMR1 = tmpccmr1;
+
+ /* Write to TIMx CCER */
+ htim->Instance->CCER = tmpccer;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Encoder interface
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Encoder_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Encoder Interface MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Encoder Interface MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ }
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ }
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ /* Enable the capture compare Interrupts 1 and/or 2 */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 and 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @param pData1: The destination Buffer address for IC1.
+ * @param pData2: The destination Buffer address for IC2.
+ * @param Length: The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((((pData1 == 0U) || (pData2 == 0U) )) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_ALL:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 and 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ *
+@verbatim
+ ==============================================================================
+ ##### IRQ handler management #####
+ ==============================================================================
+ [..]
+ This section provides Timer IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief This function handles TIM interrupts requests.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+ /* Capture compare 1 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
+ {
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ }
+ /* Capture compare 2 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 3 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 4 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* TIM Update event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
+ HAL_TIM_PeriodElapsedCallback(htim);
+ }
+ }
+ /* TIM Break input event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+ HAL_TIMEx_BreakCallback(htim);
+ }
+ }
+ /* TIM Trigger detection event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
+ HAL_TIM_TriggerCallback(htim);
+ }
+ }
+ /* TIM commutation event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
+ HAL_TIMEx_CommutationCallback(htim);
+ }
+ }
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM Output Compare configuration structure
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture Channels according to the specified
+ * parameters in the TIM_IC_InitTypeDef.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM Input Capture configuration structure
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if (Channel == TIM_CHANNEL_1)
+ {
+ /* TI1 Configuration */
+ TIM_TI1_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ /* TI2 Configuration */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Set the IC2PSC value */
+ htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U);
+ }
+ else if (Channel == TIM_CHANNEL_3)
+ {
+ /* TI3 Configuration */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ TIM_TI3_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC3PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+ /* Set the IC3PSC value */
+ htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+ }
+ else
+ {
+ /* TI4 Configuration */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ TIM_TI4_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC4PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+ /* Set the IC4PSC value */
+ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U);
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM PWM configuration structure
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ __HAL_LOCK(htim);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse Channels according to the specified
+ * parameters in the TIM_OnePulse_InitTypeDef.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM One Pulse configuration structure
+ * @param OutputChannel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param InputChannel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel)
+{
+ TIM_OC_InitTypeDef temp1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+ assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+ if(OutputChannel != InputChannel)
+ {
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Extract the Output compare configuration from sConfig structure */
+ temp1.OCMode = sConfig->OCMode;
+ temp1.Pulse = sConfig->Pulse;
+ temp1.OCPolarity = sConfig->OCPolarity;
+ temp1.OCNPolarity = sConfig->OCNPolarity;
+ temp1.OCIdleState = sConfig->OCIdleState;
+ temp1.OCNIdleState = sConfig->OCNIdleState;
+
+ switch (OutputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_OC1_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_OC2_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ default:
+ break;
+ }
+ switch (InputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstBaseAddress: TIM Base address from when the DMA will starts the Data write.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc: TIM DMA Request sources.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer: The Buffer address.
+ * @param BurstLength: DMA Burst length. This parameter can be one value
+ * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t* BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0U) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ default:
+ break;
+ }
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM DMA Burst mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstRequestSrc: TIM DMA Request sources to disable
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstBaseAddress: TIM Base address from when the DMA will starts the Data read.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc: TIM DMA Request sources.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer: The Buffer address.
+ * @param BurstLength: DMA Burst length. This parameter can be one value
+ * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0U) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DMA burst reading
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstRequestSrc: TIM DMA Request sources to disable.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Generate a software event
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param EventSource: specifies the event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+ * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EVENTSOURCE_COM: Timer COM event source
+ * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+ * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+ * @note TIM6 and TIM7 can only generate an update event.
+ * @note TIM_EVENTSOURCE_COM and TIM_EVENTSOURCE_BREAK are used only with TIM1 and TIM8.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the event sources */
+ htim->Instance->EGR = EventSource;
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sClearInputConfig: pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel: specifies the TIM Channel.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if(sClearInputConfig->ClearInputSource == TIM_CLEARINPUTSOURCE_ETR)
+ {
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the clock source to be used
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sClockSourceConfig: pointer to a TIM_ClockConfigTypeDef structure that
+ * contains the clock source information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+
+ /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+ tmpsmcr = htim->Instance->SMCR;
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+ htim->Instance->SMCR = tmpsmcr;
+
+ switch (sClockSourceConfig->ClockSource)
+ {
+ case TIM_CLOCKSOURCE_INTERNAL:
+ {
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE1:
+ {
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+ /* Reset the SMS and TS Bits */
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ /* Select the External clock mode1 and the ETRF trigger */
+ tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE2:
+ {
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Enable the External clock mode2 */
+ htim->Instance->SMCR |= TIM_SMCR_ECE;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_TI1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI1ED:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR0:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR1:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR3:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Selects the signal connected to the TI1 input: direct from CH1_input
+ * or a XOR combination between CH1_input, CH2_input & CH3_input
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param TI1_Selection: Indicate whether or not channel 1 is connected to the
+ * output of a XOR gate.
+ * This parameter can be one of the following values:
+ * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+ * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+ * pins are connected to the TI1 input (XOR combination)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+ uint32_t tmpcr2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Reset the TI1 selection */
+ tmpcr2 &= ~TIM_CR2_TI1S;
+
+ /* Set the TI1 selection */
+ tmpcr2 |= TI1_Selection;
+
+ /* Write to TIMxCR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Disable Trigger Interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode in interrupt mode
+ * @param htim: TIM handle.
+ * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Enable Trigger Interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read the captured value from Capture Compare unit
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval Captured value
+ */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpreg = 0U;
+
+ __HAL_LOCK(htim);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Return the capture 1 value */
+ tmpreg = htim->Instance->CCR1;
+
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Return the capture 2 value */
+ tmpreg = htim->Instance->CCR2;
+
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Return the capture 3 value */
+ tmpreg = htim->Instance->CCR3;
+
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Return the capture 4 value */
+ tmpreg = htim->Instance->CCR4;
+
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+ return tmpreg;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides TIM callback functions:
+ (+) Timer Period elapsed callback
+ (+) Timer Output Compare callback
+ (+) Timer Input capture callback
+ (+) Timer Trigger callback
+ (+) Timer Error callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Period elapsed callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Output Compare callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Input Capture callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWM Pulse finished callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Trigger detection callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timer error callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_ErrorCallback could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Base state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM OC state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM PWM state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Input Capture state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM One Pulse Mode state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Encoder Mode state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+/**
+ * @}
+ */
+
+/**
+ * @brief Time Base configuration
+ * @param TIMx: TIM peripheral
+ * @param Structure: pointer on TIM Time Base required parameters
+ * @retval None
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+ uint32_t tmpcr1 = 0U;
+ tmpcr1 = TIMx->CR1;
+
+ /* Set TIM Time Base Unit parameters ---------------------------------------*/
+ if(IS_TIM_CC3_INSTANCE(TIMx) != RESET)
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+ tmpcr1 |= Structure->CounterMode;
+ }
+
+ if(IS_TIM_CC1_INSTANCE(TIMx) != RESET)
+ {
+ /* Set the clock division */
+ tmpcr1 &= ~TIM_CR1_CKD;
+ tmpcr1 |= (uint32_t)Structure->ClockDivision;
+ }
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Auto-reload value */
+ TIMx->ARR = (uint32_t)Structure->Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = (uint32_t)Structure->Prescaler;
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = Structure->RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler
+ and the repetition counter(only for TIM1 and TIM8) value immediately */
+ TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+ * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_ICSelection;
+ }
+ else
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_CCMR1_CC1S_0;
+ }
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 2 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config: The output configuration structure
+ * @retval None
+ */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC2M;
+ tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC2P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 4U);
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC2NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 4U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC2NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2;
+ tmpcr2 &= ~TIM_CR2_OIS2N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 2U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 2U);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief TIM DMA Delay Pulse complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if(hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_ErrorCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Capture complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if(hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if(hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_IC_CaptureCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param ChannelState: specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+ assert_param(IS_TIM_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1E << Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelState << Channel);
+}
+
+/**
+ * @brief TIM DMA Period Elapse complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_PeriodElapsedCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Trigger callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_TriggerCallback(htim);
+}
+
+/**
+ * @brief Time Output Compare 1 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config: The output configuration structure
+ * @retval None
+ */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC1M;
+ tmpccmrx &= ~TIM_CCMR1_CC1S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC1P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= OC_Config->OCPolarity;
+
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC1NP;
+ /* Set the Output N Polarity */
+ tmpccer |= OC_Config->OCNPolarity;
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC1NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS1;
+ tmpcr2 &= ~TIM_CR2_OIS1N;
+ /* Set the Output Idle state */
+ tmpcr2 |= OC_Config->OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= OC_Config->OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 3 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config: The output configuration structure
+ * @retval None
+ */
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 3: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC3M;
+ tmpccmrx &= ~TIM_CCMR2_CC3S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC3P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 8U);
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC3NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 8U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC3NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS3;
+ tmpcr2 &= ~TIM_CR2_OIS3N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 4U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 4U);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 4 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config: The output configuration structure
+ * @retval None
+ */
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC4M;
+ tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC4P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 12U);
+
+ /*if((TIMx == TIM1) || (TIMx == TIM8))*/
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS4;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 6U);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 4 configuration
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sSlaveConfig: The slave configuration structure
+ * @retval None
+ */
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ uint32_t tmpsmcr = 0U;
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+
+ }
+ break;
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_ITR0:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR1:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR2:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ default:
+ break;
+ }
+}
+
+
+/**
+ * @brief Configure the Polarity and Filter for TI1.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= (TIM_ICFilter << 4U);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= TIM_ICPolarity;
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+ * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr1 &= ~TIM_CCMR1_CC2S;
+ tmpccmr1 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI2.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= (TIM_ICFilter << 12U);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= (TIM_ICPolarity << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+ * (on channel4 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC3S;
+ tmpccmr2 |= TIM_ICSelection;
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC3F;
+ tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F);
+
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+ tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+ * (on channel3 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC4S;
+ tmpccmr2 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC4F;
+ tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F);
+
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+ tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer ;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ITRx: The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t TIM_ITRx)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source and the slave mode*/
+ tmpsmcr |= TIM_ITRx | TIM_SLAVEMODE_EXTERNAL1;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPRESCALER_DIV1 : ETRP Prescaler OFF.
+ * @arg TIM_ETRPRESCALER_DIV2 : ETRP frequency divided by 2.
+ * @arg TIM_ETRPRESCALER_DIV4 : ETRP frequency divided by 4.
+ * @arg TIM_ETRPRESCALER_DIV8 : ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPOLARITY_INVERTED : active low or falling edge active.
+ * @arg TIM_ETRPOLARITY_NONINVERTED : active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+ uint32_t tmpsmcr = 0U;
+
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1609 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_H
+#define __STM32F4xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources.
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity.
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler.
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state.
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources.
+ This parameter can be a value of @ref TIM_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity.
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler.
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIM_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000U) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x00000000U) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x00000000U) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP ((uint32_t)0x00000000U)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x00000000U)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x00000000U)
+#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x00000000U)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x00000000U)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Output CompareN Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x00000000U)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Output Compare N Idle State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel TIM Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x00000000U)
+#define TIM_CHANNEL_2 ((uint32_t)0x00000004U)
+#define TIM_CHANNEL_3 ((uint32_t)0x00000008U)
+#define TIM_CHANNEL_4 ((uint32_t)0x0000000CU)
+#define TIM_CHANNEL_ALL ((uint32_t)0x00000018U)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 ((uint32_t)0x00000000U) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition TIM Interrupt definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Commutation_Source TIM Commutation Source
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources TIM DMA sources
+ * @{
+ */
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x00000000U)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Source TIM Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x00000001U)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Lock_level TIM Lock level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x00000000U)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input State
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity TIM Break Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x00000000U)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM AOE Bit State
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x00000000U)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode TIM Slave Mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x00000000U)
+#define TIM_SLAVEMODE_RESET ((uint32_t)0x00000004U)
+#define TIM_SLAVEMODE_GATED ((uint32_t)0x00000005U)
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x00000006U)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x00000007U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode
+ * @{
+ */
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x00000080U)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+#define TIM_TS_ITR0 ((uint32_t)0x00000000U)
+#define TIM_TS_ITR1 ((uint32_t)0x00000010U)
+#define TIM_TS_ITR2 ((uint32_t)0x00000020U)
+#define TIM_TS_ITR3 ((uint32_t)0x00000030U)
+#define TIM_TS_TI1F_ED ((uint32_t)0x00000040U)
+#define TIM_TS_TI1FP1 ((uint32_t)0x00000050U)
+#define TIM_TS_TI2FP2 ((uint32_t)0x00000060U)
+#define TIM_TS_ETRF ((uint32_t)0x00000070U)
+#define TIM_TS_NONE ((uint32_t)0x0000FFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x00000000U)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base address
+ * @{
+ */
+#define TIM_DMABASE_CR1 (0x00000000U)
+#define TIM_DMABASE_CR2 (0x00000001U)
+#define TIM_DMABASE_SMCR (0x00000002U)
+#define TIM_DMABASE_DIER (0x00000003U)
+#define TIM_DMABASE_SR (0x00000004U)
+#define TIM_DMABASE_EGR (0x00000005U)
+#define TIM_DMABASE_CCMR1 (0x00000006U)
+#define TIM_DMABASE_CCMR2 (0x00000007U)
+#define TIM_DMABASE_CCER (0x00000008U)
+#define TIM_DMABASE_CNT (0x00000009U)
+#define TIM_DMABASE_PSC (0x0000000AU)
+#define TIM_DMABASE_ARR (0x0000000BU)
+#define TIM_DMABASE_RCR (0x0000000CU)
+#define TIM_DMABASE_CCR1 (0x0000000DU)
+#define TIM_DMABASE_CCR2 (0x0000000EU)
+#define TIM_DMABASE_CCR3 (0x0000000FU)
+#define TIM_DMABASE_CCR4 (0x00000010U)
+#define TIM_DMABASE_BDTR (0x00000011U)
+#define TIM_DMABASE_DCR (0x00000012U)
+#define TIM_DMABASE_OR (0x00000013U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000U)
+#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100U)
+#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200U)
+#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300U)
+#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400U)
+#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500U)
+#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600U)
+#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700U)
+#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800U)
+#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900U)
+#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00U)
+#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00U)
+#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00U)
+#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00U)
+#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00U)
+#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00U)
+#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000U)
+#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100U)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index DMA Handle index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000U) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001U) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002U) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003U) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004U) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005U) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006U) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State Channel CC State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x00000001U)
+#define TIM_CCx_DISABLE ((uint32_t)0x00000000U)
+#define TIM_CCxN_ENABLE ((uint32_t)0x00000004U)
+#define TIM_CCxN_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+/** @brief Reset TIM handle state
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+
+/* The Main Output of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U) & TIM_CCER_CC4P)))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
+
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __COUNTER__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __AUTORELOAD__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CKD__: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval None
+ */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * _ Counter overflow/underflow
+ * _ Setting the UG bit
+ * _ Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @brief Sets the TIM Capture x input polarity on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__: TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __POLARITY__: Polarity for TIx source
+ * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+ * @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4.
+ * @retval None
+ */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ do{ \
+ TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+ }while(0)
+/**
+ * @}
+ */
+
+/* Include TIM HAL Extension module */
+#include "stm32f4xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1
+ * @{
+ */
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+
+/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters
+ * @{
+ */
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FFU) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00U) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0x0FU)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
+ ((BASE) == TIM_DMABASE_CR2) || \
+ ((BASE) == TIM_DMABASE_SMCR) || \
+ ((BASE) == TIM_DMABASE_DIER) || \
+ ((BASE) == TIM_DMABASE_SR) || \
+ ((BASE) == TIM_DMABASE_EGR) || \
+ ((BASE) == TIM_DMABASE_CCMR1) || \
+ ((BASE) == TIM_DMABASE_CCMR2) || \
+ ((BASE) == TIM_DMABASE_CCER) || \
+ ((BASE) == TIM_DMABASE_CNT) || \
+ ((BASE) == TIM_DMABASE_PSC) || \
+ ((BASE) == TIM_DMABASE_ARR) || \
+ ((BASE) == TIM_DMABASE_RCR) || \
+ ((BASE) == TIM_DMABASE_CCR1) || \
+ ((BASE) == TIM_DMABASE_CCR2) || \
+ ((BASE) == TIM_DMABASE_CCR3) || \
+ ((BASE) == TIM_DMABASE_CCR4) || \
+ ((BASE) == TIM_DMABASE_BDTR) || \
+ ((BASE) == TIM_DMABASE_DCR) || \
+ ((BASE) == TIM_DMABASE_OR))
+
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0x0F)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Mask_Definitions TIM Mask Definition
+ * @{
+ */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMAError(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1873 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim_ex.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer extension peripheral:
+ * + Time Hall Sensor Interface Initialization
+ * + Time Hall Sensor Interface Start
+ * + Time Complementary signal bread and dead time configuration
+ * + Time Master and Slave synchronization configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Extended features #####
+ ==============================================================================
+ [..]
+ The Timer Extension features include:
+ (#) Complementary outputs with programmable dead-time for :
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+ (#) Synchronization circuit to control the timer with external signals and to
+ interconnect several timers together.
+ (#) Break input to put the timer output signals in reset state or in a known state.
+ (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+ positioning purposes
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
+ (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
+ (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
+ Timer Hall Sensor Interface and the commutation event with the corresponding
+ Interrupt and DMA request if needed (Note that One Timer is used to interface
+ with the Hall sensor Interface and another Timer should be used to use
+ the commutation event).
+
+ (#) Activate the TIM peripheral using one of the start functions:
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OC_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIMEx TIMEx
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions
+ * @{
+ */
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Hall Sensor functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure TIM HAL Sensor.
+ (+) De-initialize TIM HAL Sensor.
+ (+) Start the Hall Sensor Interface.
+ (+) Stop the Hall Sensor Interface.
+ (+) Start the Hall Sensor Interface and enable interrupts.
+ (+) Stop the Hall Sensor Interface and disable interrupts.
+ (+) Start the Hall Sensor Interface and enable DMA transfers.
+ (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig: TIM Hall Sensor configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
+{
+ TIM_OC_InitTypeDef OC_Config;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIMEx_HallSensor_MspInit(htim);
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
+ TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+ /* Enable the Hall sensor interface (XOR function of the three inputs) */
+ htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+ /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+ /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+ /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+ OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+ OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+ OC_Config.OCMode = TIM_OCMODE_PWM2;
+ OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+ OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+ OC_Config.Pulse = sConfig->Commutation_Delay;
+
+ TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+ /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+ register to 101 */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Hall Sensor interface
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIMEx_HallSensor_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Hall Sensor MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Hall Sensor MSP.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall sensor Interface.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1, 2 and 3
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the capture compare Interrupts 1 event */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts event */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param pData: The destination Buffer address.
+ * @param Length: The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Set the DMA Input Capture 1 Callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream for Capture 1*/
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the capture compare 1 Interrupt */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in DMA mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+ /* Disable the capture compare Interrupts 1 event */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary Output Compare/PWM.
+ (+) Stop the Complementary Output Compare/PWM.
+ (+) Start the Complementary Output Compare/PWM and enable interrupts.
+ (+) Stop the Complementary Output Compare/PWM and disable interrupts.
+ (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
+ (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ if((READ_REG(htim->Instance->CCER) & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+{
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary PWM.
+ (+) Stop the Complementary PWM.
+ (+) Start the Complementary PWM and enable interrupts.
+ (+) Stop the Complementary PWM and disable interrupts.
+ (+) Start the Complementary PWM and enable DMA transfers.
+ (+) Stop the Complementary PWM and disable DMA transfers.
+ (+) Start the Complementary Input Capture measurement.
+ (+) Stop the Complementary Input Capture.
+ (+) Start the Complementary Input Capture and enable interrupts.
+ (+) Stop the Complementary Input Capture and disable interrupts.
+ (+) Start the Complementary Input Capture and enable DMA transfers.
+ (+) Stop the Complementary Input Capture and disable DMA transfers.
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the PWM signal generation on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation on the complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ if((READ_REG(htim->Instance->CCER) & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode on the
+ * complementary output
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData: The source Buffer address.
+ * @param Length: The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
+ * output
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM One Pulse signal generation on the complementary
+ * output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation on the complementary
+ * output.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel: TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel: TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the commutation event in case of use of the Hall sensor interface.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Configure the TIM commutation event sequence.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource: the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with interrupt.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource: the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation Interrupt Request */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with DMA.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource: the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation DMA Request */
+ /* Set the DMA Commutation Callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError;
+
+ /* Enable the Commutation DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sMasterConfig: pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Reset the MMS Bits */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Reset the MSM Bit */
+ htim->Instance->SMCR &= ~TIM_SMCR_MSM;
+ /* Set or Reset the MSM Bit */
+ htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sBreakDeadTimeConfig: pointer to a TIM_ConfigBreakDeadConfig_TypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+ htim->Instance->BDTR = (uint32_t)sBreakDeadTimeConfig->OffStateRunMode |
+ sBreakDeadTimeConfig->OffStateIDLEMode |
+ sBreakDeadTimeConfig->LockLevel |
+ sBreakDeadTimeConfig->DeadTime |
+ sBreakDeadTimeConfig->BreakState |
+ sBreakDeadTimeConfig->BreakPolarity |
+ sBreakDeadTimeConfig->AutomaticOutput;
+
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM2, TIM5 and TIM11 Remapping input capabilities.
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Remap: specifies the TIM input remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default)
+ * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trigger output.
+ * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF.
+ * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF.
+ * @arg TIM_TIM5_GPIO: TIM5 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM_TIM5_LSI: TIM5 CH4 input is connected to LSI clock.
+ * @arg TIM_TIM5_LSE: TIM5 CH4 input is connected to LSE clock.
+ * @arg TIM_TIM5_RTC: TIM5 CH4 input is connected to RTC Output event.
+ * @arg TIM_TIM11_GPIO: TIM11 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM_TIM11_HSE: TIM11 CH4 input is connected to HSE_RTC clock
+ * (HSE divided by a programmable prescaler)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+ __HAL_LOCK(htim);
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap));
+
+ /* Set the Timer remapping configuration */
+ htim->Instance->OR = Remap;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
+ * @brief Extension Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides Extension TIM callback functions:
+ (+) Timer Commutation callback
+ (+) Timer Break callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Hall commutation changed callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_CommutationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Break detection callback in non blocking mode
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_BreakCallback could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions
+ * @brief Extension Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Hall Sensor interface state
+ * @param htim: pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief TIM DMA Commutation callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIMEx_CommutationCallback(htim);
+}
+/**
+ * @}
+ */
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @param ChannelNState: specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+ * @retval None
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(TIMx));
+ assert_param(IS_TIM_COMPLEMENTARY_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1NE << Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_tim_ex.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,344 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of TIM HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_EX_H
+#define __STM32F4xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection.
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection.
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode.
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level.
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State.
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity.
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state.
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+}TIM_BreakDeadTimeConfigTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Remap TIM Remap
+ * @{
+ */
+#define TIM_TIM2_TIM8_TRGO (0x00000000U)
+#define TIM_TIM2_ETH_PTP (0x00000400U)
+#define TIM_TIM2_USBFS_SOF (0x00000800U)
+#define TIM_TIM2_USBHS_SOF (0x00000C00U)
+#define TIM_TIM5_GPIO (0x00000000U)
+#define TIM_TIM5_LSI (0x00000040U)
+#define TIM_TIM5_LSE (0x00000080U)
+#define TIM_TIM5_RTC (0x000000C0U)
+#define TIM_TIM11_GPIO (0x00000000U)
+#define TIM_TIM11_HSE (0x00000002U)
+
+#if defined (STM32F446xx)
+#define TIM_TIM11_SPDIFRX (0x00000001U)
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+/** @defgroup TIMEx_SystemBreakInput TIM System Break Input
+ * @{
+ */
+#define TIM_SYSTEMBREAKINPUT_HARDFAULT ((uint32_t)0x00000001U) /* Core Lockup lock output(Hardfault) is connected to Break Input of TIM1 and TIM8 */
+#define TIM_SYSTEMBREAKINPUT_PVD ((uint32_t)0x00000004U) /* PVD Interrupt is connected to Break Input of TIM1 and TIM8 */
+#define TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD ((uint32_t)0x00000005U) /* Core Lockup lock output(Hardfault) and PVD Interrupt are connected to Break Input of TIM1 and TIM8 */
+/**
+ * @}
+ */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5
+ * @{
+ */
+/* Extension Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6
+ * @{
+ */
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7
+ * @{
+ */
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Private Macros
+ * @{
+ */
+#if defined (STM32F446xx)
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM5_LSI)||\
+ ((TIM_REMAP) == TIM_TIM5_LSE)||\
+ ((TIM_REMAP) == TIM_TIM5_RTC)||\
+ ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM11_SPDIFRX)||\
+ ((TIM_REMAP) == TIM_TIM11_HSE))
+#else
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM5_LSI)||\
+ ((TIM_REMAP) == TIM_TIM5_LSE)||\
+ ((TIM_REMAP) == TIM_TIM5_RTC)||\
+ ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM11_HSE))
+#endif /* STM32F446xx */
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#define IS_TIM_SYSTEMBREAKINPUT(BREAKINPUT) (((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT)||\
+ ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_PVD)||\
+ ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD))
+
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFFU)
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIM Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1957 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_uart.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief UART HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The UART HAL driver can be used as follows:
+
+ (#) Declare a UART_HandleTypeDef handle structure.
+
+ (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API:
+ (##) Enable the USARTx interface clock.
+ (##) UART pins configuration:
+ (+++) Enable the clock for the UART GPIOs.
+ (+++) Configure these UART pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
+ and HAL_UART_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA()
+ and HAL_UART_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required
+ Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA Tx/Rx Stream.
+
+ (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
+ flow control and Mode(Receiver/Transmitter) in the Init structure.
+
+ (#) For the UART asynchronous mode, initialize the UART registers by calling
+ the HAL_UART_Init() API.
+
+ (#) For the UART Half duplex mode, initialize the UART registers by calling
+ the HAL_HalfDuplex_Init() API.
+
+ (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API.
+
+ (#) For the Multi-Processor mode, initialize the UART registers by calling
+ the HAL_MultiProcessor_Init() API.
+
+ [..]
+ (@) The specific UART interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit
+ and receive process.
+
+ [..]
+ (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the
+ low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customized
+ HAL_UART_MspInit() API.
+
+ [..]
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_UART_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_UART_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT()
+ (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT()
+ (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxCpltCallback
+ (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_UART_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA()
+ (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxCpltCallback
+ (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_UART_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_UART_DMAPause()
+ (+) Resume the DMA Transfer using HAL_UART_DMAResume()
+ (+) Stop the DMA Transfer using HAL_UART_DMAStop()
+
+ *** UART HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in UART HAL driver.
+
+ (+) __HAL_UART_ENABLE: Enable the UART peripheral
+ (+) __HAL_UART_DISABLE: Disable the UART peripheral
+ (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not
+ (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag
+ (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt
+ (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt
+ (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not
+
+ [..]
+ (@) You can refer to the UART HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup UART UART
+ * @brief HAL UART module driver
+ * @{
+ */
+#ifdef HAL_UART_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup UART_Private_Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+static void UART_EndTxTransfer(UART_HandleTypeDef *huart);
+static void UART_EndRxTransfer(UART_HandleTypeDef *huart);
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAError(DMA_HandleTypeDef *hdma);
+static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
+static void UART_SetConfig (UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup UART_Exported_Functions UART Exported Functions
+ * @{
+ */
+
+/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+ in asynchronous mode.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length
+ (++) Stop Bit
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ please refer to Reference manual for possible UART frame formats.
+ (++) Hardware flow control
+ (++) Receiver/transmitter modes
+ (++) Over Sampling Method
+ [..]
+ The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs
+ follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor
+ configuration procedures (details for the procedures are available in reference manual (RM0329)).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the UART mode according to the specified parameters in
+ * the UART_InitTypeDef and create the associated handle.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
+ {
+ /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */
+ assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
+ assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl));
+ }
+ else
+ {
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ }
+ assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ UART_SetConfig(huart);
+
+ /* In asynchronous mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+
+ /* Enable the peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Initialize the UART state */
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState= HAL_UART_STATE_READY;
+ huart->RxState= HAL_UART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the half-duplex mode according to the specified
+ * parameters in the UART_InitTypeDef and create the associated handle.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ UART_SetConfig(huart);
+
+ /* In half-duplex mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN));
+
+ /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL);
+
+ /* Enable the peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Initialize the UART state*/
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState= HAL_UART_STATE_READY;
+ huart->RxState= HAL_UART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the LIN mode according to the specified
+ * parameters in the UART_InitTypeDef and create the associated handle.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param BreakDetectLength: Specifies the LIN break detection length.
+ * This parameter can be one of the following values:
+ * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection
+ * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));
+ assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ UART_SetConfig(huart);
+
+ /* In LIN mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN);
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN));
+
+ /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+ SET_BIT(huart->Instance->CR2, USART_CR2_LINEN);
+
+ /* Set the USART LIN Break detection length. */
+ CLEAR_BIT(huart->Instance->CR2, USART_CR2_LBDL);
+ SET_BIT(huart->Instance->CR2, BreakDetectLength);
+
+ /* Enable the peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Initialize the UART state*/
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState= HAL_UART_STATE_READY;
+ huart->RxState= HAL_UART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the Multi-Processor mode according to the specified
+ * parameters in the UART_InitTypeDef and create the associated handle.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param Address: USART address
+ * @param WakeUpMethod: specifies the USART wake-up method.
+ * This parameter can be one of the following values:
+ * @arg UART_WAKEUPMETHOD_IDLELINE: Wake-up by an idle line detection
+ * @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wake-up by an address mark
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod));
+ assert_param(IS_UART_ADDRESS(Address));
+ assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ UART_SetConfig(huart);
+
+ /* In Multi-Processor mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN, HDSEL and IREN bits in the USART_CR3 register */
+ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+
+ /* Clear the USART address */
+ CLEAR_BIT(huart->Instance->CR2, USART_CR2_ADD);
+ /* Set the USART address node */
+ SET_BIT(huart->Instance->CR2, Address);
+
+ /* Set the wake up method by setting the WAKE bit in the CR1 register */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_WAKE);
+ SET_BIT(huart->Instance->CR1, WakeUpMethod);
+
+ /* Enable the peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Initialize the UART state */
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState= HAL_UART_STATE_READY;
+ huart->RxState= HAL_UART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the UART peripheral.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_UART_MspDeInit(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_RESET;
+ huart->RxState = HAL_UART_STATE_RESET;
+
+ /* Process Lock */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief UART MSP Init.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief UART MSP DeInit.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group2 IO operation functions
+ * @brief UART Transmit and Receive functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the UART asynchronous
+ and Half duplex data transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) Non blocking mode: The communication is performed using Interrupts
+ or DMA, these APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated UART IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks
+ will be executed respectively at the end of the transmit or receive process.
+ The HAL_UART_ErrorCallback() user callback will be executed when
+ a communication error is detected.
+
+ (#) Blocking mode APIs are:
+ (++) HAL_UART_Transmit()
+ (++) HAL_UART_Receive()
+
+ (#) Non Blocking mode APIs with Interrupt are:
+ (++) HAL_UART_Transmit_IT()
+ (++) HAL_UART_Receive_IT()
+ (++) HAL_UART_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are:
+ (++) HAL_UART_Transmit_DMA()
+ (++) HAL_UART_Receive_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non blocking mode:
+ (++) HAL_UART_TxCpltCallback()
+ (++) HAL_UART_RxCpltCallback()
+ (++) HAL_UART_ErrorCallback()
+
+ [..]
+ (@) In the Half duplex communication, it is forbidden to run the transmit
+ and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX
+ can't be useful.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sends an amount of data in blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ /* Check that a Tx process is not already ongoing */
+ if(huart->gState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_BUSY_TX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+ while(huart->TxXferCount > 0U)
+ {
+ huart->TxXferCount--;
+ if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+ {
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ huart->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ pData +=2U;
+ }
+ else
+ {
+ pData +=1U;
+ }
+ }
+ else
+ {
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ huart->Instance->DR = (*pData++ & (uint8_t)0xFFU);
+ }
+ }
+
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* At end of Tx process, restore huart->gState to Ready */
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ /* Check that a Rx process is not already ongoing */
+ if(huart->RxState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ /* Check the remain data to be received */
+ while(huart->RxXferCount > 0U)
+ {
+ huart->RxXferCount--;
+ if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+ {
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pData;
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FFU);
+ pData +=2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FFU);
+ pData +=1U;
+ }
+
+ }
+ else
+ {
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007FU);
+ }
+
+ }
+ }
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Tx process is not already ongoing */
+ if(huart->gState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pTxBuffPtr = pData;
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Transmit data register empty Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Rx process is not already ongoing */
+ if(huart->RxState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Parity Error Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the UART Data Register not empty Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Tx process is not already ongoing */
+ if(huart->gState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pTxBuffPtr = pData;
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_BUSY_TX;
+
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmatx->XferErrorCallback = UART_DMAError;
+
+ /* Set the DMA abort callback */
+ huart->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the UART transmit DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the UART CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param pData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @note When the UART parity is enabled (PCE = 1) the data received contain the parity bit.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Rx process is not already ongoing */
+ if(huart->RxState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmarx->XferErrorCallback = UART_DMAError;
+
+ /* Set the DMA abort callback */
+ huart->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Stream */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Enable the UART Parity Error Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the DMA Transfer.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart)
+{
+ uint32_t dmarequest = 0x00U;
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT);
+ if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest)
+ {
+ /* Disable the UART DMA Tx request */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ }
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR);
+ if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest)
+ {
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the UART DMA Rx request */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the DMA Transfer.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ if(huart->gState == HAL_UART_STATE_BUSY_TX)
+ {
+ /* Enable the UART DMA Tx request */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ }
+ if(huart->RxState == HAL_UART_STATE_BUSY_RX)
+ {
+ /* Clear the Overrun flag before resuming the Rx transfer*/
+ __HAL_UART_CLEAR_OREFLAG(huart);
+
+ /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the UART DMA Rx request */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the DMA Transfer.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart)
+{
+ uint32_t dmarequest = 0x00U;
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback()
+ */
+
+ /* Stop UART DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT);
+ if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest)
+ {
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Abort the UART DMA Tx channel */
+ if(huart->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(huart->hdmatx);
+ }
+ UART_EndTxTransfer(huart);
+ }
+
+ /* Stop UART DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR);
+ if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest)
+ {
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the UART DMA Rx channel */
+ if(huart->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(huart->hdmarx);
+ }
+ UART_EndRxTransfer(huart);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles UART interrupt request.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
+{
+ uint32_t isrflags = READ_REG(huart->Instance->SR);
+ uint32_t cr1its = READ_REG(huart->Instance->CR1);
+ uint32_t cr3its = READ_REG(huart->Instance->CR3);
+ uint32_t errorflags = 0x00U;
+ uint32_t dmarequest = 0x00U;
+
+ /* If no error occurs */
+ errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE));
+ if(errorflags == RESET)
+ {
+ /* UART in mode Receiver -------------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ UART_Receive_IT(huart);
+ return;
+ }
+ }
+
+ /* If some errors occur */
+ if((errorflags != RESET) && ((cr3its & (USART_CR3_EIE | USART_CR1_PEIE)) != RESET))
+ {
+ /* UART parity error interrupt occurred ----------------------------------*/
+ if(((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_PE;
+ }
+
+ /* UART noise error interrupt occurred -----------------------------------*/
+ if(((isrflags & USART_SR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_NE;
+ }
+
+ /* UART frame error interrupt occurred -----------------------------------*/
+ if(((isrflags & USART_SR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_FE;
+ }
+
+ /* UART Over-Run interrupt occurred --------------------------------------*/
+ if(((isrflags & USART_SR_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_ORE;
+ }
+
+ /* Call UART Error Call back function if need be --------------------------*/
+ if(huart->ErrorCode != HAL_UART_ERROR_NONE)
+ {
+ /* UART in mode Receiver -----------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ UART_Receive_IT(huart);
+ }
+
+ /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+ consider error as blocking */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR);
+ if(((huart->ErrorCode & HAL_UART_ERROR_ORE) != RESET) || dmarequest)
+ {
+ /* Blocking error : transfer is aborted
+ Set the UART state ready to be able to start again the process,
+ Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+ UART_EndRxTransfer(huart);
+
+ /* Disable the UART DMA Rx request if enabled */
+ if(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
+ {
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the UART DMA Rx channel */
+ if(huart->hdmarx != NULL)
+ {
+ /* Set the UART DMA Abort callback :
+ will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */
+ huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError;
+ if(HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ huart->hdmarx->XferAbortCallback(huart->hdmarx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_UART_ErrorCallback(huart);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_UART_ErrorCallback(huart);
+ }
+ }
+ else
+ {
+ /* Non Blocking error : transfer could go on.
+ Error is notified to user through user error callback */
+ HAL_UART_ErrorCallback(huart);
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ }
+ }
+ return;
+ } /* End if some error occurs */
+
+ /* UART in mode Transmitter ------------------------------------------------*/
+ if(((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+ {
+ UART_Transmit_IT(huart);
+ return;
+ }
+
+ /* UART in mode Transmitter end --------------------------------------------*/
+ if(((isrflags & USART_SR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+ {
+ UART_EndTransmit_IT(huart);
+ return;
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief UART error callbacks.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+ __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_UART_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions
+ * @brief UART control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the UART:
+ (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character.
+ (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode.
+ (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits break characters.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
+{
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Send break characters */
+ SET_BIT(huart->Instance->CR1, USART_CR1_SBK);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enters the UART in mute mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart)
+{
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Enable the USART mute mode by setting the RWU bit in the CR1 register */
+ SET_BIT(huart->Instance->CR1, USART_CR1_RWU);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Exits the UART mute mode: wake up software.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart)
+{
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the UART transmitter and disables the UART receiver.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR1;
+
+ /* Clear TE and RE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
+
+ /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
+ tmpreg |= (uint32_t)USART_CR1_TE;
+
+ /* Write to USART CR1 */
+ WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the UART receiver and disables the UART transmitter.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR1;
+
+ /* Clear TE and RE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
+
+ /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
+ tmpreg |= (uint32_t)USART_CR1_RE;
+
+ /* Write to USART CR1 */
+ WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @brief UART State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to return the State of
+ UART communication process, return Peripheral Errors occurred during communication
+ process
+ (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral.
+ (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the UART state.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL state
+ */
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart)
+{
+ uint32_t temp1= 0x00U, temp2 = 0x00U;
+ temp1 = huart->gState;
+ temp2 = huart->RxState;
+
+ return (HAL_UART_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+ * @brief Return the UART error code
+ * @param huart : pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART.
+ * @retval UART Error Code
+ */
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart)
+{
+ return huart->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA UART transmit process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode*/
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ huart->TxXferCount = 0U;
+
+ /* Disable the DMA transfer for transmit request by setting the DMAT bit
+ in the UART CR3 register */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Enable the UART Transmit Complete Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+
+ }
+ /* DMA Circular mode */
+ else
+ {
+ HAL_UART_TxCpltCallback(huart);
+ }
+}
+
+/**
+ * @brief DMA UART transmit process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_UART_TxHalfCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART receive process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode*/
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ huart->RxXferCount = 0U;
+
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+ }
+ HAL_UART_RxCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_UART_RxHalfCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void UART_DMAError(DMA_HandleTypeDef *hdma)
+{
+ uint32_t dmarequest = 0x00U;
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Stop UART DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT);
+ if((huart->gState == HAL_UART_STATE_BUSY_TX) && dmarequest)
+ {
+ huart->TxXferCount = 0U;
+ UART_EndTxTransfer(huart);
+ }
+
+ /* Stop UART DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR);
+ if((huart->RxState == HAL_UART_STATE_BUSY_RX) && dmarequest)
+ {
+ huart->RxXferCount = 0U;
+ UART_EndRxTransfer(huart);
+ }
+
+ huart->ErrorCode |= HAL_UART_ERROR_DMA;
+ HAL_UART_ErrorCallback(huart);
+}
+
+/**
+ * @brief This function handles UART Communication Timeout.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @param Flag: specifies the UART flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Tickstart Tick start value
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is set */
+ while((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ huart->gState = HAL_UART_STATE_READY;
+ huart->RxState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion).
+ * @param huart: UART handle.
+ * @retval None
+ */
+static void UART_EndTxTransfer(UART_HandleTypeDef *huart)
+{
+ /* Disable TXEIE and TCIE interrupts */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+ /* At end of Tx process, restore huart->gState to Ready */
+ huart->gState = HAL_UART_STATE_READY;
+}
+
+/**
+ * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion).
+ * @param huart: UART handle.
+ * @retval None
+ */
+static void UART_EndRxTransfer(UART_HandleTypeDef *huart)
+{
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+}
+
+/**
+ * @brief DMA UART communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ huart->RxXferCount = 0;
+ huart->TxXferCount = 0;
+
+ HAL_UART_ErrorCallback(huart);
+}
+
+/**
+ * @brief Sends an amount of data in non blocking mode.
+ * @param huart: Pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart)
+{
+ uint16_t* tmp;
+
+ /* Check that a Tx process is ongoing */
+ if(huart->gState == HAL_UART_STATE_BUSY_TX)
+ {
+ if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) huart->pTxBuffPtr;
+ huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ huart->pTxBuffPtr += 2U;
+ }
+ else
+ {
+ huart->pTxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FFU);
+ }
+
+ if(--huart->TxXferCount == 0U)
+ {
+ /* Disable the UART Transmit Complete Interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Enable the UART Transmit Complete Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart)
+{
+ /* Disable the UART Transmit Complete Interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+
+ /* Tx process is ended, restore huart->gState to Ready */
+ huart->gState = HAL_UART_STATE_READY;
+
+ HAL_UART_TxCpltCallback(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receives an amount of data in non blocking mode
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
+{
+ uint16_t* tmp;
+
+ /* Check that a Rx process is ongoing */
+ if(huart->RxState == HAL_UART_STATE_BUSY_RX)
+ {
+ if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) huart->pRxBuffPtr;
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FFU);
+ huart->pRxBuffPtr += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FFU);
+ huart->pRxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ if(huart->Init.Parity == UART_PARITY_NONE)
+ {
+ *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007FU);
+ }
+ }
+
+ if(--huart->RxXferCount == 0U)
+ {
+ /* Disable the UART Parity Error Interrupt and RXNE interrupt*/
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Rx process is completed, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+
+ HAL_UART_RxCpltCallback(huart);
+
+ return HAL_OK;
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configures the UART peripheral.
+ * @param huart: pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval None
+ */
+static void UART_SetConfig(UART_HandleTypeDef *huart)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));
+ assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
+ assert_param(IS_UART_PARITY(huart->Init.Parity));
+ assert_param(IS_UART_MODE(huart->Init.Mode));
+
+ /*-------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR2;
+
+ /* Clear STOP[13:12] bits */
+ tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);
+
+ /* Configure the UART Stop Bits: Set STOP[13:12] bits according to huart->Init.StopBits value */
+ tmpreg |= (uint32_t)huart->Init.StopBits;
+
+ /* Write to USART CR2 */
+ WRITE_REG(huart->Instance->CR2, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR1;
+
+ /* Clear M, PCE, PS, TE and RE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+ USART_CR1_RE | USART_CR1_OVER8));
+
+ /* Configure the UART Word Length, Parity and mode:
+ Set the M bits according to huart->Init.WordLength value
+ Set PCE and PS bits according to huart->Init.Parity value
+ Set TE and RE bits according to huart->Init.Mode value
+ Set OVER8 bit according to huart->Init.OverSampling value */
+ tmpreg |= (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling;
+
+ /* Write to USART CR1 */
+ WRITE_REG(huart->Instance->CR1, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ tmpreg = huart->Instance->CR3;
+
+ /* Clear CTSE and RTSE bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
+
+ /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */
+ tmpreg |= huart->Init.HwFlowCtl;
+
+ /* Write to USART CR3 */
+ WRITE_REG(huart->Instance->CR3, (uint32_t)tmpreg);
+
+ /* Check the Over Sampling */
+ if(huart->Init.OverSampling == UART_OVERSAMPLING_8)
+ {
+ /*-------------------------- USART BRR Configuration ---------------------*/
+ if((huart->Instance == USART1) || (huart->Instance == USART6))
+ {
+ huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
+ }
+ else
+ {
+ huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
+ }
+ }
+ else
+ {
+ /*-------------------------- USART BRR Configuration ---------------------*/
+ if((huart->Instance == USART1) || (huart->Instance == USART6))
+ {
+ huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
+ }
+ else
+ {
+ huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_UART_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_uart.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,784 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_UART_H
+#define __STM32F4xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
+ Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+}UART_InitTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ * @note HAL UART State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains UART state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized. HAL UART Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+ HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+ HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
+ Value is allowed for gState only */
+ HAL_UART_STATE_ERROR = 0xE0U /*!< Error
+ Value is allowed for gState only */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< UART registers base address */
+
+ UART_InitTypeDef Init; /*!< UART communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /*!< UART Error code */
+
+}UART_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported constants
+ * @{
+ */
+
+/** @defgroup UART_Error_Code UART Error Code
+ * @brief UART Error Code
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Word_Length UART Word Length
+ * @{
+ */
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000U)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x00000000U)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x00000000U)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x00000000U)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x00000000U)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000U)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000U)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_functions UART Wakeup Functions
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000U)
+#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)0x00000800U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags UART FLags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
+#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
+#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
+#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
+#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
+#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
+#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
+#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
+#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
+#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask (16 bits) in the Y register
+ * - Y : Interrupt source register (2bits)
+ * - 0001: CR1 register
+ * - 0010: CR2 register
+ * - 0011: CR3 register
+ *
+ * @{
+ */
+
+#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+
+#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
+
+#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
+#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+ * @{
+ */
+
+/** @brief Reset UART handle gstate & RxState
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_UART_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
+ } while(0)
+
+/** @brief Flushes the UART DR register
+ * @param __HANDLE__: specifies the UART Handle.
+ */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg UART_FLAG_LBD: LIN Break detection flag
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: Overrun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified UART pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg UART_FLAG_LBD: LIN Break detection flag.
+ * @arg UART_FLAG_TC: Transmission Complete flag.
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the UART PE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the UART FE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART NE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART IDLE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enable the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define UART_IT_MASK ((uint32_t)0x0000FFFFU)
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
+/** @brief Disable the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
+
+/** @brief Enable CTS flow control
+ * This macro allows to enable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
+ } while(0)
+
+/** @brief Disable CTS flow control
+ * This macro allows to disable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
+ } while(0)
+
+/** @brief Enable RTS flow control
+ * This macro allows to enable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
+ } while(0)
+
+/** @brief Disable RTS flow control
+ * This macro allows to disable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
+ } while(0)
+
+/** @brief macros to enables the UART's one bit sample method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief macros to disables the UART's one bit sample method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UART_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UART_Private_Constants UART Private Constants
+ * @{
+ */
+/** @brief UART interruptions flag mask
+ *
+ */
+#define UART_CR1_REG_INDEX 1U
+#define UART_CR2_REG_INDEX 2U
+#define UART_CR3_REG_INDEX 3U
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+ * @{
+ */
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+#define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3U) == 0x00U) && ((MODE) != (uint32_t)0x00U))
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
+#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
+
+#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
+#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+ = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
+#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
+ (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \
+ (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
+
+#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
+#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+ = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
+#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
+ ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
+ (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,2025 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_usart.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief USART HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Universal Synchronous Asynchronous Receiver Transmitter (USART) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The USART HAL driver can be used as follows:
+
+ (#) Declare a USART_HandleTypeDef handle structure.
+ (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit () API:
+ (##) Enable the USARTx interface clock.
+ (##) USART pins configuration:
+ (+++) Enable the clock for the USART GPIOs.
+ (+++) Configure these USART pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(),
+ HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA()
+ HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+ (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
+ flow control and Mode(Receiver/Transmitter) in the husart Init structure.
+
+ (#) Initialize the USART registers by calling the HAL_USART_Init() API:
+ (++) These APIs configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customized HAL_USART_MspInit(&husart) API.
+
+ -@@- The specific USART interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process.
+
+ (#) Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_USART_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_USART_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_USART_Transmit_IT()
+ (+) At transmission end of transfer HAL_USART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_USART_Receive_IT()
+ (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxCpltCallback
+ (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_USART_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_USART_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_USART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_USART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_USART_Receive_DMA()
+ (+) At reception end of half transfer HAL_USART_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_USART_RxCpltCallback
+ (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_USART_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_USART_DMAPause()
+ (+) Resume the DMA Transfer using HAL_USART_DMAResume()
+ (+) Stop the DMA Transfer using HAL_USART_DMAStop()
+
+ *** USART HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in USART HAL driver.
+
+ (+) __HAL_USART_ENABLE: Enable the USART peripheral
+ (+) __HAL_USART_DISABLE: Disable the USART peripheral
+ (+) __HAL_USART_GET_FLAG : Check whether the specified USART flag is set or not
+ (+) __HAL_USART_CLEAR_FLAG : Clear the specified USART pending flag
+ (+) __HAL_USART_ENABLE_IT: Enable the specified USART interrupt
+ (+) __HAL_USART_DISABLE_IT: Disable the specified USART interrupt
+
+ [..]
+ (@) You can refer to the USART HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup USART USART
+ * @brief HAL USART Synchronous module driver
+ * @{
+ */
+#ifdef HAL_USART_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup USART_Private_Constants
+ * @{
+ */
+#define DUMMY_DATA 0xFFFFU
+#define USART_TIMEOUT_VALUE 22000U
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup USART_Private_Functions
+ * @{
+ */
+static void USART_EndTxTransfer(USART_HandleTypeDef *husart);
+static void USART_EndRxTransfer(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart);
+static void USART_SetConfig (USART_HandleTypeDef *husart);
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAError(DMA_HandleTypeDef *hdma);
+static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup USART_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @defgroup USART_Exported_Functions_Group1 USART Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USART
+ in asynchronous and in synchronous modes.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length
+ (++) Stop Bit
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ please refer to Reference manual for possible USART frame formats.
+ (++) USART polarity
+ (++) USART phase
+ (++) USART LastBit
+ (++) Receiver/transmitter modes
+
+ [..]
+ The HAL_USART_Init() function follows the USART synchronous configuration
+ procedure (details for the procedure are available in reference manual (RM0329)).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the USART mode according to the specified
+ * parameters in the USART_InitTypeDef and create the associated handle.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart)
+{
+ /* Check the USART handle allocation */
+ if(husart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_USART_INSTANCE(husart->Instance));
+
+ if(husart->State == HAL_USART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ husart->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_USART_MspInit(husart);
+ }
+
+ husart->State = HAL_USART_STATE_BUSY;
+
+ /* Set the USART Communication parameters */
+ USART_SetConfig(husart);
+
+ /* In USART mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register
+ - HDSEL, SCEN and IREN bits in the USART_CR3 register */
+ CLEAR_BIT(husart->Instance->CR2, USART_CR2_LINEN);
+ CLEAR_BIT(husart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+
+ /* Enable the Peripheral */
+ __HAL_USART_ENABLE(husart);
+
+ /* Initialize the USART state */
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State= HAL_USART_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the USART peripheral.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart)
+{
+ /* Check the USART handle allocation */
+ if(husart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_USART_INSTANCE(husart->Instance));
+
+ husart->State = HAL_USART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_USART_DISABLE(husart);
+
+ /* DeInit the low level hardware */
+ HAL_USART_MspDeInit(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USART MSP Init.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_MspInit(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USART MSP DeInit.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions_Group2 IO operation functions
+ * @brief USART Transmit and Receive functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the USART synchronous
+ data transfers.
+
+ [..]
+ The USART supports master mode only: it cannot receive or send data related to an input
+ clock (SCLK is always an output).
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode: The communication is performed using Interrupts
+ or DMA, These API's return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated USART IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback()
+ user callbacks
+ will be executed respectively at the end of the transmit or Receive process
+ The HAL_USART_ErrorCallback() user callback will be executed when a communication
+ error is detected
+
+ (#) Blocking mode APIs are :
+ (++) HAL_USART_Transmit() in simplex mode
+ (++) HAL_USART_Receive() in full duplex receive only
+ (++) HAL_USART_TransmitReceive() in full duplex mode
+
+ (#) Non Blocking mode APIs with Interrupt are :
+ (++) HAL_USART_Transmit_IT()in simplex mode
+ (++) HAL_USART_Receive_IT() in full duplex receive only
+ (++) HAL_USART_TransmitReceive_IT() in full duplex mode
+ (++) HAL_USART_IRQHandler()
+
+ (#) Non Blocking mode functions with DMA are :
+ (++) HAL_USART_Transmit_DMA()in simplex mode
+ (++) HAL_USART_Receive_DMA() in full duplex receive only
+ (++) HAL_USART_TransmitReceie_DMA() in full duplex mode
+ (++) HAL_USART_DMAPause()
+ (++) HAL_USART_DMAResume()
+ (++) HAL_USART_DMAStop()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_USART_TxHalfCpltCallback()
+ (++) HAL_USART_TxCpltCallback()
+ (++) HAL_USART_RxHalfCpltCallback()
+ (++) HAL_USART_RxCpltCallback()
+ (++) HAL_USART_ErrorCallback()
+ (++) HAL_USART_TxRxCpltCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Simplex Send an amount of data in blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+ while(husart->TxXferCount > 0U)
+ {
+ husart->TxXferCount--;
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ /* Wait for TC flag in order to write data in DR */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pTxData;
+ husart->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ pTxData += 2U;
+ }
+ else
+ {
+ pTxData += 1U;
+ }
+ }
+ else
+ {
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ husart->Instance->DR = (*pTxData++ & (uint8_t)0xFFU);
+ }
+ }
+
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Receive an amount of data in blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pRxData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ husart->RxXferSize = Size;
+ husart->RxXferCount = Size;
+ /* Check the remain data to be received */
+ while(husart->RxXferCount > 0U)
+ {
+ husart->RxXferCount--;
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ /* Send dummy byte in order to generate clock */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FFU);
+
+ /* Wait for RXNE Flag */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pRxData ;
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FFU);
+ pRxData +=2;
+ }
+ else
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FFU);
+ pRxData +=1;
+ }
+ }
+ else
+ {
+ /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Send Dummy Byte in order to generate clock */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FFU);
+
+ /* Wait until RXNE flag is set to receive the byte */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ /* Receive data */
+ *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ /* Receive data */
+ *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007FU);
+ }
+
+ }
+ }
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Send receive an amount of data in full-duplex mode (blocking mode).
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data transmitted buffer
+ * @param pRxData: Pointer to data received buffer
+ * @param Size: Amount of data to be sent
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment */
+ tickstart = HAL_GetTick();
+
+ husart->RxXferSize = Size;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+ husart->RxXferCount = Size;
+
+ /* Check the remain data to be received */
+ while(husart->TxXferCount > 0U)
+ {
+ husart->TxXferCount--;
+ husart->RxXferCount--;
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ /* Wait for TC flag in order to write data in DR */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pTxData;
+ husart->Instance->DR = (*tmp & (uint16_t)0x01FFU);
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ pTxData += 2U;
+ }
+ else
+ {
+ pTxData += 1U;
+ }
+
+ /* Wait for RXNE Flag */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ tmp = (uint16_t*) pRxData ;
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FFU);
+ pRxData += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FFU);
+ pRxData += 1U;
+ }
+ }
+ else
+ {
+ /* Wait for TC flag in order to write data in DR */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ husart->Instance->DR = (*pTxData++ & (uint8_t)0x00FFU);
+
+ /* Wait for RXNE Flag */
+ if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ /* Receive data */
+ *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ /* Receive data */
+ *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007FU);
+ }
+ }
+ }
+
+ husart->State = HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Simplex Send an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ * @note The USART errors are not managed to avoid the overrun error.
+ */
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX;
+
+ /* The USART Error Interrupts: (Frame error, Noise error, Overrun error)
+ are not managed by the USART transmit process to avoid the overrun interrupt
+ when the USART mode is configured for transmit and receive "USART_MODE_TX_RX"
+ to benefit for the frame error and noise interrupts the USART mode should be
+ configured only for transmit "USART_MODE_TX"
+ The __HAL_USART_ENABLE_IT(husart, USART_IT_ERR) can be used to enable the Frame error,
+ Noise error interrupt */
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Transmit Data Register Empty Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Simplex Receive an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pRxData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->RxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Data Register not empty Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Enable the USART Parity Error Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* Send dummy byte in order to generate the clock for the slave to send data */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FFU);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data transmitted buffer
+ * @param pRxData: Pointer to data received buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->RxXferCount = Size;
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Data Register not empty Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Enable the USART Parity Error Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the USART Transmit Data Register Empty Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Simplex Send an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data buffer
+ * @param Size: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+ husart->TxXferCount = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX;
+
+ /* Set the USART DMA transfer complete callback */
+ husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+ /* Set the DMA error callback */
+ husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+ /* Set the DMA abort callback */
+ husart->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the USART transmit DMA Stream */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Receive an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pRxData: Pointer to data buffer
+ * @param Size: Amount of data to be received
+ * @retval HAL status
+ * @note The USART DMA transmit stream must be configured in order to generate the clock for the slave.
+ * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
+ */
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->pTxBuffPtr = pRxData;
+ husart->TxXferSize = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_RX;
+
+ /* Set the USART DMA Rx transfer complete callback */
+ husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+ /* Set the USART DMA Rx transfer error callback */
+ husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+ /* Set the DMA abort callback */
+ husart->hdmarx->XferAbortCallback = NULL;
+
+ /* Set the USART Tx DMA transfer complete callback as NULL because the communication closing
+ is performed in DMA reception complete callback */
+ husart->hdmatx->XferHalfCpltCallback = NULL;
+ husart->hdmatx->XferCpltCallback = NULL;
+
+ /* Set the DMA error callback */
+ husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ husart->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the USART receive DMA Stream */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Enable the USART transmit DMA Stream: the transmit stream is used in order
+ to generate in the non-blocking mode the clock to the slave device,
+ this mode isn't a simplex receive mode but a full-duplex receive one */
+ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
+
+ /* Clear the Overrun flag just before enabling the DMA Rx request: mandatory for the second transfer
+ when using the USART in circular mode */
+ __HAL_USART_CLEAR_OREFLAG(husart);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Parity Error Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param pTxData: Pointer to data transmitted buffer
+ * @param pRxData: Pointer to data received buffer
+ * @param Size: Amount of data to be received
+ * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ if(husart->State == HAL_USART_STATE_READY)
+ {
+ if((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ husart->pRxBuffPtr = pRxData;
+ husart->RxXferSize = Size;
+ husart->pTxBuffPtr = pTxData;
+ husart->TxXferSize = Size;
+
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+ /* Set the USART DMA Rx transfer complete callback */
+ husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+ /* Set the USART DMA Tx transfer complete callback */
+ husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+ /* Set the USART DMA Half transfer complete callback */
+ husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+ /* Set the USART DMA Tx transfer error callback */
+ husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+ /* Set the USART DMA Rx transfer error callback */
+ husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+ /* Set the DMA abort callback */
+ husart->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the USART receive DMA Stream */
+ tmp = (uint32_t*)&pRxData;
+ HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size);
+
+ /* Enable the USART transmit DMA Stream */
+ tmp = (uint32_t*)&pTxData;
+ HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC);
+
+ /* Clear the Overrun flag: mandatory for the second transfer in circular mode */
+ __HAL_USART_CLEAR_OREFLAG(husart);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ /* Enable the USART Parity Error Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the USART CR3 register */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pauses the DMA Transfer.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart)
+{
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ /* Disable the USART DMA Tx request */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resumes the DMA Transfer.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart)
+{
+ /* Process Locked */
+ __HAL_LOCK(husart);
+
+ /* Enable the USART DMA Tx request */
+ SET_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the DMA Transfer.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart)
+{
+ uint32_t dmarequest = 0x00U;
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback()
+ */
+
+ /* Stop USART DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT);
+ if((husart->State == HAL_USART_STATE_BUSY_TX) && dmarequest)
+ {
+ USART_EndTxTransfer(husart);
+
+ /* Abort the USART DMA Tx channel */
+ if(husart->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(husart->hdmatx);
+ }
+
+ /* Disable the USART Tx DMA request */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+ }
+
+ /* Stop USART DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR);
+ if((husart->State == HAL_USART_STATE_BUSY_RX) && dmarequest)
+ {
+ USART_EndRxTransfer(husart);
+
+ /* Abort the USART DMA Rx channel */
+ if(husart->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(husart->hdmarx);
+ }
+
+ /* Disable the USART Rx DMA request */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles USART interrupt request.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart)
+{
+ uint32_t isrflags = READ_REG(husart->Instance->SR);
+ uint32_t cr1its = READ_REG(husart->Instance->CR1);
+ uint32_t cr3its = READ_REG(husart->Instance->CR3);
+ uint32_t errorflags = 0x00U;
+ uint32_t dmarequest = 0x00U;
+
+ /* If no error occurs */
+ errorflags = (isrflags & (uint32_t)(USART_SR_PE | USART_SR_FE | USART_SR_ORE | USART_SR_NE));
+ if(errorflags == RESET)
+ {
+ /* USART in mode Receiver -------------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ USART_Receive_IT(husart);
+ }
+ else
+ {
+ USART_TransmitReceive_IT(husart);
+ }
+ return;
+ }
+ }
+ /* If some errors occur */
+ if((errorflags != RESET) && ((cr3its & (USART_CR3_EIE | USART_CR1_PEIE)) != RESET))
+ {
+ /* USART parity error interrupt occurred ----------------------------------*/
+ if(((isrflags & USART_SR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+ {
+ husart->ErrorCode |= HAL_USART_ERROR_PE;
+ }
+
+ /* USART noise error interrupt occurred --------------------------------*/
+ if(((isrflags & USART_SR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ husart->ErrorCode |= HAL_USART_ERROR_NE;
+ }
+
+ /* USART frame error interrupt occurred --------------------------------*/
+ if(((isrflags & USART_SR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ husart->ErrorCode |= HAL_USART_ERROR_FE;
+ }
+
+ /* USART Over-Run interrupt occurred -----------------------------------*/
+ if(((isrflags & USART_SR_ORE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ husart->ErrorCode |= HAL_USART_ERROR_ORE;
+ }
+
+ if(husart->ErrorCode != HAL_USART_ERROR_NONE)
+ {
+ /* USART in mode Receiver -----------------------------------------------*/
+ if(((isrflags & USART_SR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ USART_Receive_IT(husart);
+ }
+ else
+ {
+ USART_TransmitReceive_IT(husart);
+ }
+ }
+ /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+ consider error as blocking */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR);
+ if(((husart->ErrorCode & HAL_USART_ERROR_ORE) != RESET) || dmarequest)
+ {
+ /* Set the USART state ready to be able to start again the process,
+ Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+ USART_EndRxTransfer(husart);
+
+ /* Disable the USART DMA Rx request if enabled */
+ if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR))
+ {
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the USART DMA Rx channel */
+ if(husart->hdmarx != NULL)
+ {
+ /* Set the USART DMA Abort callback :
+ will lead to call HAL_USART_ErrorCallback() at end of DMA abort procedure */
+ husart->hdmarx->XferAbortCallback = USART_DMAAbortOnError;
+
+ if(HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ husart->hdmarx->XferAbortCallback(husart->hdmarx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_USART_ErrorCallback(husart);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_USART_ErrorCallback(husart);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_USART_ErrorCallback(husart);
+ husart->ErrorCode = HAL_USART_ERROR_NONE;
+ }
+ }
+ return;
+ }
+
+ /* USART in mode Transmitter -----------------------------------------------*/
+ if(((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ USART_Transmit_IT(husart);
+ }
+ else
+ {
+ USART_TransmitReceive_IT(husart);
+ }
+ return;
+ }
+
+ /* USART in mode Transmitter (transmission end) ----------------------------*/
+ if(((isrflags & USART_SR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+ {
+ USART_EndTransmit_IT(husart);
+ return;
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx/Rx Transfers completed callback for the non-blocking process.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USART error callbacks.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+ __weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(husart);
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_USART_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief USART State and Errors functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State and Errors functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to return the State of
+ USART communication
+ process, return Peripheral Errors occurred during communication process
+ (+) HAL_USART_GetState() API can be helpful to check in run-time the state
+ of the USART peripheral.
+ (+) HAL_USART_GetError() check in run-time errors that could be occurred during
+ communication.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the USART state.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL state
+ */
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart)
+{
+ return husart->State;
+}
+
+/**
+ * @brief Return the USART error code
+ * @param husart : pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART.
+ * @retval USART Error Code
+ */
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart)
+{
+ return husart->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief DMA USART transmit process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ husart->TxXferCount = 0U;
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ /* Disable the DMA transfer for transmit request by resetting the DMAT bit
+ in the USART CR3 register */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Enable the USART Transmit Complete Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_TCIE);
+ }
+ }
+ /* DMA Circular mode */
+ else
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ HAL_USART_TxCpltCallback(husart);
+ }
+ }
+}
+
+/**
+ * @brief DMA USART transmit process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_USART_TxHalfCpltCallback(husart);
+}
+
+/**
+ * @brief DMA USART receive process complete callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* DMA Normal mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ husart->RxXferCount = 0x00U;
+
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit
+ in the USART CR3 register */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+
+ husart->State= HAL_USART_STATE_READY;
+ HAL_USART_RxCpltCallback(husart);
+ }
+ /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
+ else
+ {
+ /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit
+ in the USART CR3 register */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR);
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+ husart->State= HAL_USART_STATE_READY;
+ HAL_USART_TxRxCpltCallback(husart);
+ }
+ }
+ /* DMA circular mode */
+ else
+ {
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ HAL_USART_RxCpltCallback(husart);
+ }
+ /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
+ else
+ {
+ HAL_USART_TxRxCpltCallback(husart);
+ }
+ }
+}
+
+/**
+ * @brief DMA USART receive process half complete callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_USART_RxHalfCpltCallback(husart);
+}
+
+/**
+ * @brief DMA USART communication error callback.
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void USART_DMAError(DMA_HandleTypeDef *hdma)
+{
+ uint32_t dmarequest = 0x00U;
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ husart->RxXferCount = 0x00U;
+ husart->TxXferCount = 0x00U;
+
+ /* Stop USART DMA Tx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT);
+ if((husart->State == HAL_USART_STATE_BUSY_TX) && dmarequest)
+ {
+ USART_EndTxTransfer(husart);
+ }
+
+ /* Stop USART DMA Rx request if ongoing */
+ dmarequest = HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR);
+ if((husart->State == HAL_USART_STATE_BUSY_RX) && dmarequest)
+ {
+ USART_EndRxTransfer(husart);
+ }
+
+ husart->ErrorCode |= HAL_USART_ERROR_DMA;
+ husart->State= HAL_USART_STATE_READY;
+
+ HAL_USART_ErrorCallback(husart);
+}
+
+/**
+ * @brief This function handles USART Communication Timeout.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @param Flag: specifies the USART flag to check.
+ * @param Status: The new Flag status (SET or RESET).
+ * @param Tickstart: Tick start value.
+ * @param Timeout: Timeout duration.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is set */
+ while((__HAL_USART_GET_FLAG(husart, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - Tickstart ) > Timeout))
+ {
+ /* Disable the USART Transmit Complete Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Disable the USART RXNE Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the USART Parity Error Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ husart->State= HAL_USART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(husart);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief End ongoing Tx transfer on USART peripheral (following error detection or Transmit completion).
+ * @param husart: USART handle.
+ * @retval None
+ */
+static void USART_EndTxTransfer(USART_HandleTypeDef *husart)
+{
+ /* Disable TXEIE and TCIE interrupts */
+ CLEAR_BIT(husart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+ /* At end of Tx process, restore husart->State to Ready */
+ husart->State = HAL_USART_STATE_READY;
+}
+
+/**
+ * @brief End ongoing Rx transfer on USART peripheral (following error detection or Reception completion).
+ * @param husart: USART handle.
+ * @retval None
+ */
+static void USART_EndRxTransfer(USART_HandleTypeDef *husart)
+{
+ /* Disable RXNE, PE and ERR interrupts */
+ CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ /* At end of Rx process, restore husart->State to Ready */
+ husart->State = HAL_USART_STATE_READY;
+}
+
+/**
+ * @brief DMA USART communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ husart->RxXferCount = 0x00U;
+ husart->TxXferCount = 0x00U;
+
+ HAL_USART_ErrorCallback(husart);
+}
+
+/**
+ * @brief Simplex Send an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ * @note The USART errors are not managed to avoid the overrun error.
+ */
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart)
+{
+ uint16_t* tmp;
+
+ if(husart->State == HAL_USART_STATE_BUSY_TX)
+ {
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) husart->pTxBuffPtr;
+ husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ husart->pTxBuffPtr += 2U;
+ }
+ else
+ {
+ husart->pTxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FFU);
+ }
+
+ if(--husart->TxXferCount == 0U)
+ {
+ /* Disable the USART Transmit data register empty Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Enable the USART Transmit Complete Interrupt */
+ SET_BIT(husart->Instance->CR1, USART_CR1_TCIE);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wraps up transmission in non blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart)
+{
+ /* Disable the USART Transmit Complete Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_TCIE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ husart->State = HAL_USART_STATE_READY;
+
+ HAL_USART_TxCpltCallback(husart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Simplex Receive an amount of data in non-blocking mode.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart)
+{
+ uint16_t* tmp;
+ if(husart->State == HAL_USART_STATE_BUSY_RX)
+ {
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) husart->pRxBuffPtr;
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FFU);
+ husart->pRxBuffPtr += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FFU);
+ husart->pRxBuffPtr += 1U;
+ }
+ if(--husart->RxXferCount != 0x00U)
+ {
+ /* Send dummy byte in order to generate the clock for the slave to send the next data */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FFU);
+ }
+ }
+ else
+ {
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007FU);
+ }
+
+ if(--husart->RxXferCount != 0x00U)
+ {
+ /* Send dummy byte in order to generate the clock for the slave to send the next data */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FFU);
+ }
+ }
+
+ if(husart->RxXferCount == 0U)
+ {
+ /* Disable the USART RXNE Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the USART Parity Error Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ husart->State = HAL_USART_STATE_READY;
+ HAL_USART_RxCpltCallback(husart);
+
+ return HAL_OK;
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart)
+{
+ uint16_t* tmp;
+
+ if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
+ {
+ if(husart->TxXferCount != 0x00U)
+ {
+ if(__HAL_USART_GET_FLAG(husart, USART_FLAG_TXE) != RESET)
+ {
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) husart->pTxBuffPtr;
+ husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FFU);
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ husart->pTxBuffPtr += 2U;
+ }
+ else
+ {
+ husart->pTxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FFU);
+ }
+ husart->TxXferCount--;
+
+ /* Check the latest data transmitted */
+ if(husart->TxXferCount == 0U)
+ {
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_TXEIE);
+ }
+ }
+ }
+
+ if(husart->RxXferCount != 0x00U)
+ {
+ if(__HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE) != RESET)
+ {
+ if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+ {
+ tmp = (uint16_t*) husart->pRxBuffPtr;
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FFU);
+ husart->pRxBuffPtr += 2U;
+ }
+ else
+ {
+ *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FFU);
+ husart->pRxBuffPtr += 1U;
+ }
+ }
+ else
+ {
+ if(husart->Init.Parity == USART_PARITY_NONE)
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FFU);
+ }
+ else
+ {
+ *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007FU);
+ }
+ }
+ husart->RxXferCount--;
+ }
+ }
+
+ /* Check the latest data received */
+ if(husart->RxXferCount == 0U)
+ {
+ /* Disable the USART RXNE Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_RXNEIE);
+
+ /* Disable the USART Parity Error Interrupt */
+ CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE);
+
+ husart->State = HAL_USART_STATE_READY;
+
+ HAL_USART_TxRxCpltCallback(husart);
+
+ return HAL_OK;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configures the USART pferipheral.
+ * @param husart: pointer to a USART_HandleTypeDef structure that contains
+ * the configuration information for the specified USART module.
+ * @retval None
+ */
+static void USART_SetConfig(USART_HandleTypeDef *husart)
+{
+ uint32_t tmpreg = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_USART_INSTANCE(husart->Instance));
+ assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity));
+ assert_param(IS_USART_PHASE(husart->Init.CLKPhase));
+ assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit));
+ assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate));
+ assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength));
+ assert_param(IS_USART_STOPBITS(husart->Init.StopBits));
+ assert_param(IS_USART_PARITY(husart->Init.Parity));
+ assert_param(IS_USART_MODE(husart->Init.Mode));
+
+ /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the
+ receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */
+ CLEAR_BIT(husart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+
+ /*---------------------------- USART CR2 Configuration ---------------------*/
+ tmpreg = husart->Instance->CR2;
+ /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP));
+ /* Configure the USART Clock, CPOL, CPHA and LastBit -----------------------*/
+ /* Set CPOL bit according to husart->Init.CLKPolarity value */
+ /* Set CPHA bit according to husart->Init.CLKPhase value */
+ /* Set LBCL bit according to husart->Init.CLKLastBit value */
+ /* Set Stop Bits: Set STOP[13:12] bits according to husart->Init.StopBits value */
+ tmpreg |= (uint32_t)(USART_CLOCK_ENABLE| husart->Init.CLKPolarity |
+ husart->Init.CLKPhase| husart->Init.CLKLastBit | husart->Init.StopBits);
+ /* Write to USART CR2 */
+ WRITE_REG(husart->Instance->CR2, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = husart->Instance->CR1;
+
+ /* Clear M, PCE, PS, TE, RE and OVER8 bits */
+ tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+ USART_CR1_RE | USART_CR1_OVER8));
+
+ /* Configure the USART Word Length, Parity and mode:
+ Set the M bits according to husart->Init.WordLength value
+ Set PCE and PS bits according to husart->Init.Parity value
+ Set TE and RE bits according to husart->Init.Mode value
+ Force OVER8 bit to 1 in order to reach the max USART frequencies */
+ tmpreg |= (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8;
+
+ /* Write to USART CR1 */
+ WRITE_REG(husart->Instance->CR1, (uint32_t)tmpreg);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* Clear CTSE and RTSE bits */
+ CLEAR_BIT(husart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE));
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ if((husart->Instance == USART1) || (husart->Instance == USART6))
+ {
+ husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK2Freq(), husart->Init.BaudRate);
+ }
+ else
+ {
+ husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK1Freq(), husart->Init.BaudRate);
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_USART_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_usart.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,588 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_usart.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_USART_H
+#define __STM32F4xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+ * @{
+ */
+
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_USART_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04U /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ USART_InitTypeDef Init; /* Usart communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to Usart Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* Usart Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /* Usart Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to Usart Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* Usart Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /* Usart Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* Usart Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* Usart Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_USART_StateTypeDef State; /* Usart communication state */
+
+ __IO uint32_t ErrorCode; /* USART Error code */
+
+}USART_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants USART Exported Constants
+ * @{
+ */
+
+/** @defgroup USART_Error_Code USART Error Code
+ * @brief USART Error Code
+ * @{
+ */
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Word_Length USART Word Length
+ * @{
+ */
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000U)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits USART Number of Stop Bits
+ * @{
+ */
+#define USART_STOPBITS_1 ((uint32_t)0x00000000U)
+#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity USART Parity
+ * @{
+ */
+#define USART_PARITY_NONE ((uint32_t)0x00000000U)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode USART Mode
+ * @{
+ */
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock USART Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLE ((uint32_t)0x00000000U)
+#define USART_CLOCK_ENABLE ((uint32_t)USART_CR2_CLKEN)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity USART Clock Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW ((uint32_t)0x00000000U)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase USART Clock Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE ((uint32_t)0x00000000U)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit USART Last Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE ((uint32_t)0x00000000U)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+/**
+ * @}
+ */
+
+/** @defgroup USART_NACK_State USART NACK State
+ * @{
+ */
+#define USART_NACK_ENABLE ((uint32_t)USART_CR3_NACK)
+#define USART_NACK_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags USART Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define USART_FLAG_TXE ((uint32_t)0x00000080U)
+#define USART_FLAG_TC ((uint32_t)0x00000040U)
+#define USART_FLAG_RXNE ((uint32_t)0x00000020U)
+#define USART_FLAG_IDLE ((uint32_t)0x00000010U)
+#define USART_FLAG_ORE ((uint32_t)0x00000008U)
+#define USART_FLAG_NE ((uint32_t)0x00000004U)
+#define USART_FLAG_FE ((uint32_t)0x00000002U)
+#define USART_FLAG_PE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ *
+ * @{
+ */
+#define USART_IT_PE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define USART_IT_TXE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define USART_IT_TC ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define USART_IT_RXNE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define USART_IT_IDLE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+
+#define USART_IT_LBD ((uint32_t)(USART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
+
+#define USART_IT_CTS ((uint32_t)(USART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
+#define USART_IT_ERR ((uint32_t)(USART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+/** @brief Reset USART handle state
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: Overrun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg USART_FLAG_TC: Transmission Complete flag.
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the USART PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg = 0x00U; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the USART FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified USART interrupts.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK)))
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK)))
+
+/** @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == 2U)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK))
+
+/** @brief Macro to enable the USART's one bit sample method
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Macro to disable the USART's one bit sample method
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_USART_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_USART_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup USART_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup USART_Private_Constants USART Private Constants
+ * @{
+ */
+/** @brief USART interruptions flag mask
+ *
+ */
+#define USART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
+
+#define USART_CR1_REG_INDEX 1U
+#define USART_CR2_REG_INDEX 2U
+#define USART_CR3_REG_INDEX 3U
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup USART_Private_Macros USART Private Macros
+ * @{
+ */
+#define IS_USART_NACK_STATE(NACK) (((NACK) == USART_NACK_ENABLE) || \
+ ((NACK) == USART_NACK_DISABLE))
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+ ((LASTBIT) == USART_LASTBIT_ENABLE))
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLE) || \
+ ((CLOCK) == USART_CLOCK_ENABLE))
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+ ((STOPBITS) == USART_STOPBITS_0_5) || \
+ ((STOPBITS) == USART_STOPBITS_1_5) || \
+ ((STOPBITS) == USART_STOPBITS_2))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+ ((PARITY) == USART_PARITY_EVEN) || \
+ ((PARITY) == USART_PARITY_ODD))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFF3) == 0x00U) && ((MODE) != (uint32_t)0x00U))
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
+
+#define USART_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
+#define USART_DIVMANT(_PCLK_, _BAUD_) (USART_DIV((_PCLK_), (_BAUD_))/100U)
+#define USART_DIVFRAQ(_PCLK_, _BAUD_) (((USART_DIV((_PCLK_), (_BAUD_)) - (USART_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U + 50U) / 100U)
+#define USART_BRR(_PCLK_, _BAUD_) ((USART_DIVMANT((_PCLK_), (_BAUD_)) << 4U)|(USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup USART_Private_Functions USART Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,314 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_wwdg.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief WWDG HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Window Watchdog (WWDG) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State functions
+ @verbatim
+ ==============================================================================
+ ##### WWDG specific features #####
+ ==============================================================================
+ [..]
+ Once enabled the WWDG generates a system reset on expiry of a programmed
+ time period, unless the program refreshes the counter (downcounter)
+ before reaching 0x3F value (i.e. a reset is generated when the counter
+ value rolls over from 0x40 to 0x3F).
+
+ (+) An MCU reset is also generated if the counter value is refreshed
+ before the counter has reached the refresh window value. This
+ implies that the counter must be refreshed in a limited window.
+ (+) Once enabled the WWDG cannot be disabled except by a system reset.
+ (+) WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
+ reset occurs.
+ (+) The WWDG counter input clock is derived from the APB clock divided
+ by a programmable prescaler.
+ (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler)
+ (+) WWDG timeout (mS) = 1000 * Counter / WWDG clock
+ (+) WWDG Counter refresh is allowed between the following limits :
+ (++) min time (mS) = 1000 * (Counter _ Window) / WWDG clock
+ (++) max time (mS) = 1000 * (Counter _ 0x40) / WWDG clock
+
+ (+) Min-max timeout value at 50 MHz(PCLK1): 81.9 us / 41.9 ms
+
+ (+) The Early Wakeup Interrupt (EWI) can be used if specific safety
+ operations or data logging must be performed before the actual reset is
+ generated. When the downcounter reaches the value 0x40, an EWI interrupt
+ is generated and the corresponding interrupt service routine (ISR) can
+ be used to trigger specific actions (such as communications or data
+ logging), before resetting the device.
+ In some applications, the EWI interrupt can be used to manage a software
+ system check and/or system recovery/graceful degradation, without
+ generating a WWDG reset. In this case, the corresponding interrupt
+ service routine (ISR) should reload the WWDG counter to avoid the WWDG
+ reset, then trigger the required actions.
+ Note:When the EWI interrupt cannot be served, e.g. due to a system lock
+ in a higher priority task, the WWDG reset will eventually be generated.
+
+ (+) Debug mode : When the microcontroller enters debug mode (core halted),
+ the WWDG counter either continues to work normally or stops, depending
+ on DBG_WWDG_STOP configuration bit in DBG module, accessible through
+ __HAL_DBGMCU_FREEZE_WWDG() and __HAL_DBGMCU_UNFREEZE_WWDG() macros
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE().
+
+ (+) Set the WWDG prescaler, refresh window, counter value and Early Wakeup
+ Interrupt mode using using HAL_WWDG_Init() function.
+ This enables WWDG peripheral and the downcounter starts downcounting
+ from given counter value.
+ Init function can be called again to modify all watchdog parameters,
+ however if EWI mode has been set once, it can't be clear until next
+ reset.
+
+ (+) The application program must refresh the WWDG counter at regular
+ intervals during normal operation to prevent an MCU reset using
+ HAL_WWDG_Refresh() function. This operation must occur only when
+ the counter is lower than the window value already programmed.
+
+ (+) if Early Wakeup Interrupt mode is enable an interrupt is generated when
+ the counter reaches 0x40. User can add his own code in weak function
+ HAL_WWDG_EarlyWakeupCallback().
+
+ *** WWDG HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in WWDG HAL driver.
+
+ (+) __HAL_WWDG_GET_IT_SOURCE: Check the selected WWDG's interrupt source.
+ (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status.
+ (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+/** @defgroup WWDG WWDG
+ * @brief WWDG HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Functions WWDG Exported Functions
+ * @{
+ */
+
+/** @defgroup WWDG_Exported_Functions_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and start the WWDG according to the specified parameters
+ in the WWDG_InitTypeDef of associated handle.
+ (+) Initialize the WWDG MSP.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the WWDG according to the specified.
+ * parameters in the WWDG_InitTypeDef of associated handle.
+ * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Check the WWDG handle allocation */
+ if(hwwdg == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
+ assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
+ assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
+ assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));
+ assert_param(IS_WWDG_EWI_MODE(hwwdg->Init.EWIMode));
+
+ /* Init the low level hardware */
+ HAL_WWDG_MspInit(hwwdg);
+
+ /* Set WWDG Counter */
+ WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter));
+
+ /* Set WWDG Prescaler and Window */
+ WRITE_REG(hwwdg->Instance->CFR, (hwwdg->Init.EWIMode | hwwdg->Init.Prescaler | hwwdg->Init.Window));
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the WWDG MSP.
+ * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @note When rewriting this function in user file, mechanism may be added
+ * to avoid multiple initialize when HAL_WWDG_Init function is called
+ * again to change parameters.
+ * @retval None
+ */
+__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hwwdg);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_WWDG_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Refresh the WWDG.
+ (+) Handle WWDG interrupt request and associated function callback.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Refresh the WWDG.
+ * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Write to WWDG CR the WWDG Counter value to refresh with */
+ WRITE_REG(hwwdg->Instance->CR, (hwwdg->Init.Counter));
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle WWDG interrupt request.
+ * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations
+ * or data logging must be performed before the actual reset is generated.
+ * The EWI interrupt is enabled by calling HAL_WWDG_Init function with
+ * EWIMode set to WWDG_EWI_ENABLE.
+ * When the downcounter reaches the value 0x40, and EWI interrupt is
+ * generated and the corresponding Interrupt Service Routine (ISR) can
+ * be used to trigger specific actions (such as communications or data
+ * logging), before resetting the device.
+ * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval None
+ */
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg)
+{
+ /* Check if Early Wakeup Interrupt is enable */
+ if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET)
+ {
+ /* Check if WWDG Early Wakeup Interrupt occurred */
+ if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET)
+ {
+ /* Clear the WWDG Early Wakeup flag */
+ __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF);
+
+ /* Early Wakeup callback */
+ HAL_WWDG_EarlyWakeupCallback(hwwdg);
+ }
+ }
+}
+
+/**
+ * @brief WWDG Early Wakeup callback.
+ * @param hwwdg : pointer to a WWDG_HandleTypeDef structure that contains
+ * the configuration information for the specified WWDG module.
+ * @retval None
+ */
+__weak void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef* hwwdg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hwwdg);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_WWDG_EarlyWakeupCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_WWDG_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_hal_wwdg.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,283 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_WWDG_H
+#define __STM32F4xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Types WWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number Min_Data = 0x40 and Max_Data = 0x7F */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+ uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interupt is enable or not.
+ This parameter can be a value of @ref WWDG_EWI_Mode */
+
+}WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG handle Structure definition
+ */
+typedef struct
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+}WWDG_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
+ * @{
+ */
+#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition WWDG Flag definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler WWDG Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000U) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_EWI_Mode WWDG Early Wakeup Interrupt Mode
+ * @{
+ */
+#define WWDG_EWI_DISABLE 0x00000000u /*!< EWI Disable */
+#define WWDG_EWI_ENABLE WWDG_CFR_EWI /*!< EWI Enable */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Private_Macros WWDG Private Macros
+ * @{
+ */
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
+
+#define IS_WWDG_WINDOW(__WINDOW__) (((__WINDOW__) >= WWDG_CFR_W_6) && ((__WINDOW__) <= WWDG_CFR_W))
+
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= WWDG_CR_T_6) && ((__COUNTER__) <= WWDG_CR_T))
+
+#define IS_WWDG_EWI_MODE(__MODE__) (((__MODE__) == WWDG_EWI_ENABLE) || \
+ ((__MODE__) == WWDG_EWI_DISABLE))
+/**
+ * @}
+ */
+
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Enables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__ specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))
+
+/**
+ * @brief Checks whether the selected WWDG interrupt has occurred or not.
+ * @param __HANDLE__ WWDG handle
+ * @param __INTERRUPT__ specifies the it to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified WWDG flag is set or not.
+ * @param __HANDLE__ WWDG handle
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the WWDG's pending flags.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/** @brief Checks if the specified WWDG interrupt source is enabled or disabled.
+ * @param __HANDLE__: WWDG Handle.
+ * @param __INTERRUPT__: specifies the WWDG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early Wakeup Interrupt
+ * @retval state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup WWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef* hwwdg);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1710 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fmc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FMC Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Flexible Memory Controller (FMC) peripheral memories:
+ * + Initialization/de-initialization functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FMC peripheral features #####
+ ==============================================================================
+ [..] The Flexible memory controller (FMC) includes three memory controllers:
+ (+) The NOR/PSRAM memory controller
+ (+) The NAND/PC Card memory controller
+ (+) The Synchronous DRAM (SDRAM) controller
+
+ [..] The FMC functional block makes the interface with synchronous and asynchronous static
+ memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
+ (+) to translate AHB transactions into the appropriate external device protocol
+ (+) to meet the access time requirements of the external memory devices
+
+ [..] All external memories share the addresses, data and control signals with the controller.
+ Each external device is accessed by means of a unique Chip Select. The FMC performs
+ only one access at a time to an external device.
+ The main features of the FMC controller are the following:
+ (+) Interface with static-memory mapped devices including:
+ (++) Static random access memory (SRAM)
+ (++) Read-only memory (ROM)
+ (++) NOR Flash memory/OneNAND Flash memory
+ (++) PSRAM (4 memory banks)
+ (++) 16-bit PC Card compatible devices
+ (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
+ data
+ (+) Interface with synchronous DRAM (SDRAM) memories
+ (+) Independent Chip Select control for each memory bank
+ (+) Independent configuration for each memory bank
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FMC_LL FMC Low Layer
+ * @brief FMC driver modules
+ * @{
+ */
+
+#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) || defined(HAL_SDRAM_MODULE_ENABLED)
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup FMC_LL_Private_Functions
+ * @{
+ */
+
+/** @addtogroup FMC_LL_NORSRAM
+ * @brief NORSRAM Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NORSRAM device driver #####
+ ==============================================================================
+
+ [..]
+ This driver contains a set of APIs to interface with the FMC NORSRAM banks in order
+ to run the NORSRAM external devices.
+
+ (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit()
+ (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init()
+ (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init()
+ (+) FMC NORSRAM bank extended timing configuration using the function
+ FMC_NORSRAM_Extended_Timing_Init()
+ (+) FMC NORSRAM bank enable/disable write operation using the functions
+ FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable()
+
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC NORSRAM interface
+ (+) De-initialize the FMC NORSRAM interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the FMC_NORSRAM device according to the specified
+ * control parameters in the FMC_NORSRAM_InitTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Init: Pointer to NORSRAM Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef* Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank));
+ assert_param(IS_FMC_MUX(Init->DataAddressMux));
+ assert_param(IS_FMC_MEMORY(Init->MemoryType));
+ assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode));
+ assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity));
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ assert_param(IS_FMC_WRAP_MODE(Init->WrapMode));
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+ assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
+ assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation));
+ assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal));
+ assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode));
+ assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait));
+ assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst));
+ assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock));
+ assert_param(IS_FMC_PAGESIZE(Init->PageSize));
+#if defined (STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo));
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+
+ /* Get the BTCR register value */
+ tmpr = Device->BTCR[Init->NSBank];
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN,
+ WAITEN, EXTMOD, ASYNCWAIT, CPSIZE, CBURSTRW and CCLKEN bits */
+ tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN | FMC_BCR1_MUXEN | FMC_BCR1_MTYP | \
+ FMC_BCR1_MWID | FMC_BCR1_FACCEN | FMC_BCR1_BURSTEN | \
+ FMC_BCR1_WAITPOL | FMC_BCR1_WRAPMOD | FMC_BCR1_WAITCFG | \
+ FMC_BCR1_WREN | FMC_BCR1_WAITEN | FMC_BCR1_EXTMOD | \
+ FMC_BCR1_ASYNCWAIT | FMC_BCR1_CPSIZE | FMC_BCR1_CBURSTRW | \
+ FMC_BCR1_CCLKEN));
+
+ /* Set NORSRAM device control parameters */
+ tmpr |= (uint32_t)(Init->DataAddressMux |\
+ Init->MemoryType |\
+ Init->MemoryDataWidth |\
+ Init->BurstAccessMode |\
+ Init->WaitSignalPolarity |\
+ Init->WrapMode |\
+ Init->WaitSignalActive |\
+ Init->WriteOperation |\
+ Init->WaitSignal |\
+ Init->ExtendedMode |\
+ Init->AsynchronousWait |\
+ Init->PageSize |\
+ Init->WriteBurst |\
+ Init->ContinuousClock);
+#else /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */
+ /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, CPSIZE, WAITCFG, WREN,
+ WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW, CCLKEN and WFDIS bits */
+ tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN | FMC_BCR1_MUXEN | FMC_BCR1_MTYP | \
+ FMC_BCR1_MWID | FMC_BCR1_FACCEN | FMC_BCR1_BURSTEN | \
+ FMC_BCR1_WAITPOL | FMC_BCR1_WAITCFG | FMC_BCR1_CPSIZE | \
+ FMC_BCR1_WREN | FMC_BCR1_WAITEN | FMC_BCR1_EXTMOD | \
+ FMC_BCR1_ASYNCWAIT | FMC_BCR1_CBURSTRW | FMC_BCR1_CCLKEN | \
+ FMC_BCR1_WFDIS));
+
+ /* Set NORSRAM device control parameters */
+ tmpr |= (uint32_t)(Init->DataAddressMux |\
+ Init->MemoryType |\
+ Init->MemoryDataWidth |\
+ Init->BurstAccessMode |\
+ Init->WaitSignalPolarity |\
+ Init->WaitSignalActive |\
+ Init->WriteOperation |\
+ Init->WaitSignal |\
+ Init->ExtendedMode |\
+ Init->AsynchronousWait |\
+ Init->WriteBurst |\
+ Init->ContinuousClock |\
+ Init->PageSize |\
+ Init->WriteFifo);
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+ if(Init->MemoryType == FMC_MEMORY_TYPE_NOR)
+ {
+ tmpr |= (uint32_t)FMC_NORSRAM_FLASH_ACCESS_ENABLE;
+ }
+
+ Device->BTCR[Init->NSBank] = tmpr;
+
+ /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */
+ if((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1))
+ {
+ Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->ContinuousClock);
+ }
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ if(Init->NSBank != FMC_NORSRAM_BANK1)
+ {
+ Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->WriteFifo);
+ }
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the FMC_NORSRAM peripheral
+ * @param Device: Pointer to NORSRAM device instance
+ * @param ExDevice: Pointer to NORSRAM extended mode device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Disable the FMC_NORSRAM device */
+ __FMC_NORSRAM_DISABLE(Device, Bank);
+
+ /* De-initialize the FMC_NORSRAM device */
+ /* FMC_NORSRAM_BANK1 */
+ if(Bank == FMC_NORSRAM_BANK1)
+ {
+ Device->BTCR[Bank] = 0x000030DBU;
+ }
+ /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */
+ else
+ {
+ Device->BTCR[Bank] = 0x000030D2U;
+ }
+
+ Device->BTCR[Bank + 1] = 0x0FFFFFFFU;
+ ExDevice->BWTR[Bank] = 0x0FFFFFFFU;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FMC_NORSRAM Timing according to the specified
+ * parameters in the FMC_NORSRAM_TimingTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Timing: Pointer to NORSRAM Timing structure
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
+ assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+ assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision));
+ assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency));
+ assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Get the BTCR register value */
+ tmpr = Device->BTCR[Bank + 1U];
+
+ /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+ tmpr &= ((uint32_t)~(FMC_BTR1_ADDSET | FMC_BTR1_ADDHLD | FMC_BTR1_DATAST | \
+ FMC_BTR1_BUSTURN | FMC_BTR1_CLKDIV | FMC_BTR1_DATLAT | \
+ FMC_BTR1_ACCMOD));
+
+ /* Set FMC_NORSRAM device timing parameters */
+ tmpr |= (uint32_t)(Timing->AddressSetupTime |\
+ ((Timing->AddressHoldTime) << 4U) |\
+ ((Timing->DataSetupTime) << 8U) |\
+ ((Timing->BusTurnAroundDuration) << 16U) |\
+ (((Timing->CLKDivision) - 1U) << 20U) |\
+ (((Timing->DataLatency) - 2U) << 24U) |\
+ (Timing->AccessMode));
+
+ Device->BTCR[Bank + 1U] = tmpr;
+
+ /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */
+ if(HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN))
+ {
+ tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1U] & ~(((uint32_t)0x0FU) << 20U));
+ tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << 20U);
+ Device->BTCR[FMC_NORSRAM_BANK1 + 1U] = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FMC_NORSRAM Extended mode Timing according to the specified
+ * parameters in the FMC_NORSRAM_TimingTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Timing: Pointer to NORSRAM Timing structure
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode));
+
+ /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+ if(ExtendedMode == FMC_EXTENDED_MODE_ENABLE)
+ {
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device));
+ assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
+ assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+ assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Get the BWTR register value */
+ tmpr = Device->BWTR[Bank];
+
+ /* Clear ADDSET, ADDHLD, DATAST, BUSTURN and ACCMOD bits */
+ tmpr &= ((uint32_t)~(FMC_BWTR1_ADDSET | FMC_BWTR1_ADDHLD | FMC_BWTR1_DATAST | \
+ FMC_BWTR1_BUSTURN | FMC_BWTR1_ACCMOD));
+
+ tmpr |= (uint32_t)(Timing->AddressSetupTime |\
+ ((Timing->AddressHoldTime) << 4U) |\
+ ((Timing->DataSetupTime) << 8U) |\
+ ((Timing->BusTurnAroundDuration) << 16U) |\
+ (Timing->AccessMode));
+
+ Device->BWTR[Bank] = tmpr;
+ }
+ else
+ {
+ Device->BWTR[Bank] = 0x0FFFFFFFU;
+ }
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FMC_NORSRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FMC NORSRAM interface.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Enables dynamically FMC_NORSRAM write operation.
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Enable write operation */
+ Device->BTCR[Bank] |= FMC_WRITE_OPERATION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NORSRAM write operation.
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+ /* Disable write operation */
+ Device->BTCR[Bank] &= ~FMC_WRITE_OPERATION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FMC_LL_NAND
+ * @brief NAND Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NAND device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FMC NAND banks in order
+ to run the NAND external devices.
+
+ (+) FMC NAND bank reset using the function FMC_NAND_DeInit()
+ (+) FMC NAND bank control configuration using the function FMC_NAND_Init()
+ (+) FMC NAND bank common space timing configuration using the function
+ FMC_NAND_CommonSpace_Timing_Init()
+ (+) FMC NAND bank attribute space timing configuration using the function
+ FMC_NAND_AttributeSpace_Timing_Init()
+ (+) FMC NAND bank enable/disable ECC correction feature using the functions
+ FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable()
+ (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC()
+
+@endverbatim
+ * @{
+ */
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC NAND interface
+ (+) De-initialize the FMC NAND interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FMC_NAND device according to the specified
+ * control parameters in the FMC_NAND_HandleTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Init: Pointer to NAND Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Init->NandBank));
+ assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
+ assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
+ assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
+
+ /* Get the NAND bank register value */
+ tmpr = Device->PCR;
+
+ /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+ tmpr &= ((uint32_t)~(FMC_PCR_PWAITEN | FMC_PCR_PBKEN | FMC_PCR_PTYP | \
+ FMC_PCR_PWID | FMC_PCR_ECCEN | FMC_PCR_TCLR | \
+ FMC_PCR_TAR | FMC_PCR_ECCPS));
+
+ /* Set NAND device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FMC_PCR_MEMORY_TYPE_NAND |\
+ Init->MemoryDataWidth |\
+ Init->EccComputation |\
+ Init->ECCPageSize |\
+ ((Init->TCLRSetupTime) << 9U) |\
+ ((Init->TARSetupTime) << 13U));
+
+ /* NAND bank registers configuration */
+ Device->PCR = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_NAND Common space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PMEM;
+
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PMEM_MEMSET2 | FMC_PMEM_MEMWAIT2 | FMC_PMEM_MEMHOLD2 | \
+ FMC_PMEM_MEMHIZ2));
+
+ /* Set FMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U)
+ );
+
+ /* NAND bank registers configuration */
+ Device->PMEM = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_NAND Attribute space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Get the NAND bank register value */
+ tmpr = Device->PATT;
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PATT_ATTSET2 | FMC_PATT_ATTWAIT2 | FMC_PATT_ATTHOLD2 | \
+ FMC_PATT_ATTHIZ2));
+
+ /* Set FMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ /* NAND bank registers configuration */
+ Device->PATT = tmpr;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief DeInitializes the FMC_NAND device
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Disable the NAND Bank */
+ __FMC_NAND_DISABLE(Device, Bank);
+
+ /* De-initialize the NAND Bank */
+ /* Set the FMC_NAND_BANK registers to their reset values */
+ Device->PCR = 0x00000018U;
+ Device->SR = 0x00000040U;
+ Device->PMEM = 0xFCFCFCFCU;
+ Device->PATT = 0xFCFCFCFCU;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_FMC_NAND_Group2 Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FMC_NAND Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FMC NAND interface.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Enables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Enable ECC feature */
+ Device->PCR |= FMC_PCR_ECCEN;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Disable ECC feature */
+ Device->PCR &= ~FMC_PCR_ECCEN;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param ECCval: Pointer to ECC value
+ * @param Bank: NAND bank number
+ * @param Timeout: Timeout wait value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until FIFO is empty */
+ while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Get the ECCR register value */
+ *ECCval = (uint32_t)Device->ECCR;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC NAND interface
+ (+) De-initialize the FMC NAND interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the FMC_NAND device according to the specified
+ * control parameters in the FMC_NAND_HandleTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Init: Pointer to NAND Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Init->NandBank));
+ assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
+ assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
+ assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
+
+ if(Init->NandBank == FMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PCR2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PCR3;
+ }
+
+ /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+ tmpr &= ((uint32_t)~(FMC_PCR2_PWAITEN | FMC_PCR2_PBKEN | FMC_PCR2_PTYP | \
+ FMC_PCR2_PWID | FMC_PCR2_ECCEN | FMC_PCR2_TCLR | \
+ FMC_PCR2_TAR | FMC_PCR2_ECCPS));
+
+ /* Set NAND device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FMC_PCR_MEMORY_TYPE_NAND |\
+ Init->MemoryDataWidth |\
+ Init->EccComputation |\
+ Init->ECCPageSize |\
+ ((Init->TCLRSetupTime) << 9U) |\
+ ((Init->TARSetupTime) << 13U));
+
+ if(Init->NandBank == FMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PCR2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PCR3 = tmpr;
+ }
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Initializes the FMC_NAND Common space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PMEM2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PMEM3;
+ }
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PMEM2_MEMSET2 | FMC_PMEM2_MEMWAIT2 | FMC_PMEM2_MEMHOLD2 | \
+ FMC_PMEM2_MEMHIZ2));
+
+ /* Set FMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U)
+ );
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PMEM2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PMEM3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_NAND Attribute space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PATT2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PATT3;
+ }
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PATT2_ATTSET2 | FMC_PATT2_ATTWAIT2 | FMC_PATT2_ATTHOLD2 | \
+ FMC_PATT2_ATTHIZ2));
+
+ /* Set FMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PATT2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PATT3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FMC_NAND device
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Disable the NAND Bank */
+ __FMC_NAND_DISABLE(Device, Bank);
+
+ /* De-initialize the NAND Bank */
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* Set the FMC_NAND_BANK2 registers to their reset values */
+ Device->PCR2 = 0x00000018U;
+ Device->SR2 = 0x00000040U;
+ Device->PMEM2 = 0xFCFCFCFCU;
+ Device->PATT2 = 0xFCFCFCFCU;
+ }
+ /* FMC_Bank3_NAND */
+ else
+ {
+ /* Set the FMC_NAND_BANK3 registers to their reset values */
+ Device->PCR3 = 0x00000018U;
+ Device->SR3 = 0x00000040U;
+ Device->PMEM3 = 0xFCFCFCFCU;
+ Device->PATT3 = 0xFCFCFCFCU;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup FMC_LL_NAND_Private_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FMC_NAND Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FMC NAND interface.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Enables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Enable ECC feature */
+ if(Bank == FMC_NAND_BANK2)
+ {
+ Device->PCR2 |= FMC_PCR2_ECCEN;
+ }
+ else
+ {
+ Device->PCR3 |= FMC_PCR3_ECCEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Disable ECC feature */
+ if(Bank == FMC_NAND_BANK2)
+ {
+ Device->PCR2 &= ~FMC_PCR2_ECCEN;
+ }
+ else
+ {
+ Device->PCR3 &= ~FMC_PCR3_ECCEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param ECCval: Pointer to ECC value
+ * @param Bank: NAND bank number
+ * @param Timeout: Timeout wait value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_NAND_DEVICE(Device));
+ assert_param(IS_FMC_NAND_BANK(Bank));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until FIFO is empty */
+ while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ if(Bank == FMC_NAND_BANK2)
+ {
+ /* Get the ECCR2 register value */
+ *ECCval = (uint32_t)Device->ECCR2;
+ }
+ else
+ {
+ /* Get the ECCR3 register value */
+ *ECCval = (uint32_t)Device->ECCR3;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @addtogroup FMC_LL_PCCARD
+ * @brief PCCARD Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use PCCARD device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FMC PCCARD bank in order
+ to run the PCCARD/compact flash external devices.
+
+ (+) FMC PCCARD bank reset using the function FMC_PCCARD_DeInit()
+ (+) FMC PCCARD bank control configuration using the function FMC_PCCARD_Init()
+ (+) FMC PCCARD bank common space timing configuration using the function
+ FMC_PCCARD_CommonSpace_Timing_Init()
+ (+) FMC PCCARD bank attribute space timing configuration using the function
+ FMC_PCCARD_AttributeSpace_Timing_Init()
+ (+) FMC PCCARD bank IO space timing configuration using the function
+ FMC_PCCARD_IOSpace_Timing_Init()
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FMC_LL_PCCARD_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC PCCARD interface
+ (+) De-initialize the FMC PCCARD interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FMC_PCCARD device according to the specified
+ * control parameters in the FMC_PCCARD_HandleTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Init: Pointer to PCCARD Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
+
+ /* Get PCCARD control register value */
+ tmpr = Device->PCR4;
+
+ /* Clear TAR, TCLR, PWAITEN and PWID bits */
+ tmpr &= ((uint32_t)~(FMC_PCR4_TAR | FMC_PCR4_TCLR | FMC_PCR4_PWAITEN | \
+ FMC_PCR4_PWID));
+
+ /* Set FMC_PCCARD device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FMC_NAND_PCC_MEM_BUS_WIDTH_16 |\
+ (Init->TCLRSetupTime << 9U) |\
+ (Init->TARSetupTime << 13U));
+
+ Device->PCR4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_PCCARD Common space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get PCCARD common space timing register value */
+ tmpr = Device->PMEM4;
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PMEM4_MEMSET4 | FMC_PMEM4_MEMWAIT4 | FMC_PMEM4_MEMHOLD4 | \
+ FMC_PMEM4_MEMHIZ4));
+ /* Set PCCARD timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ Device->PMEM4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_PCCARD Attribute space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get PCCARD timing parameters */
+ tmpr = Device->PATT4;
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FMC_PATT4_ATTSET4 | FMC_PATT4_ATTWAIT4 | FMC_PATT4_ATTHOLD4 | \
+ FMC_PATT4_ATTHIZ4));
+
+ /* Set PCCARD timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+ Device->PATT4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_PCCARD IO space Timing according to the specified
+ * parameters in the FMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get FMC_PCCARD device timing parameters */
+ tmpr = Device->PIO4;
+
+ /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */
+ tmpr &= ((uint32_t)~(FMC_PIO4_IOSET4 | FMC_PIO4_IOWAIT4 | FMC_PIO4_IOHOLD4 | \
+ FMC_PIO4_IOHIZ4));
+
+ /* Set FMC_PCCARD device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ Device->PIO4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FMC_PCCARD device
+ * @param Device: Pointer to PCCARD device instance
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_PCCARD_DEVICE(Device));
+
+ /* Disable the FMC_PCCARD device */
+ __FMC_PCCARD_DISABLE(Device);
+
+ /* De-initialize the FMC_PCCARD device */
+ Device->PCR4 = 0x00000018U;
+ Device->SR4 = 0x00000000U;
+ Device->PMEM4 = 0xFCFCFCFCU;
+ Device->PATT4 = 0xFCFCFCFCU;
+ Device->PIO4 = 0xFCFCFCFCU;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/** @addtogroup FMC_LL_SDRAM
+ * @brief SDRAM Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use SDRAM device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FMC SDRAM banks in order
+ to run the SDRAM external devices.
+
+ (+) FMC SDRAM bank reset using the function FMC_SDRAM_DeInit()
+ (+) FMC SDRAM bank control configuration using the function FMC_SDRAM_Init()
+ (+) FMC SDRAM bank timing configuration using the function FMC_SDRAM_Timing_Init()
+ (+) FMC SDRAM bank enable/disable write operation using the functions
+ FMC_SDRAM_WriteOperation_Enable()/FMC_SDRAM_WriteOperation_Disable()
+ (+) FMC SDRAM bank send command using the function FMC_SDRAM_SendCommand()
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FMC_LL_SDRAM_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FMC SDRAM interface
+ (+) De-initialize the FMC SDRAM interface
+ (+) Configure the FMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FMC_SDRAM device according to the specified
+ * control parameters in the FMC_SDRAM_InitTypeDef
+ * @param Device: Pointer to SDRAM device instance
+ * @param Init: Pointer to SDRAM Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init)
+{
+ uint32_t tmpr1 = 0U;
+ uint32_t tmpr2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Init->SDBank));
+ assert_param(IS_FMC_COLUMNBITS_NUMBER(Init->ColumnBitsNumber));
+ assert_param(IS_FMC_ROWBITS_NUMBER(Init->RowBitsNumber));
+ assert_param(IS_FMC_SDMEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FMC_INTERNALBANK_NUMBER(Init->InternalBankNumber));
+ assert_param(IS_FMC_CAS_LATENCY(Init->CASLatency));
+ assert_param(IS_FMC_WRITE_PROTECTION(Init->WriteProtection));
+ assert_param(IS_FMC_SDCLOCK_PERIOD(Init->SDClockPeriod));
+ assert_param(IS_FMC_READ_BURST(Init->ReadBurst));
+ assert_param(IS_FMC_READPIPE_DELAY(Init->ReadPipeDelay));
+
+ /* Set SDRAM bank configuration parameters */
+ if (Init->SDBank != FMC_SDRAM_BANK2)
+ {
+ tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
+
+ /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+ tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+ FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+ FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+
+ tmpr1 |= (uint32_t)(Init->ColumnBitsNumber |\
+ Init->RowBitsNumber |\
+ Init->MemoryDataWidth |\
+ Init->InternalBankNumber |\
+ Init->CASLatency |\
+ Init->WriteProtection |\
+ Init->SDClockPeriod |\
+ Init->ReadBurst |\
+ Init->ReadPipeDelay
+ );
+ Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
+ }
+ else /* FMC_Bank2_SDRAM */
+ {
+ tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
+
+ /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+ tmpr1 &= ((uint32_t)~(FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+ tmpr1 |= (uint32_t)(Init->SDClockPeriod |\
+ Init->ReadBurst |\
+ Init->ReadPipeDelay);
+
+ tmpr2 = Device->SDCR[FMC_SDRAM_BANK2];
+
+ /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+ tmpr2 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+ FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+ FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+ tmpr2 |= (uint32_t)(Init->ColumnBitsNumber |\
+ Init->RowBitsNumber |\
+ Init->MemoryDataWidth |\
+ Init->InternalBankNumber |\
+ Init->CASLatency |\
+ Init->WriteProtection);
+
+ Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
+ Device->SDCR[FMC_SDRAM_BANK2] = tmpr2;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FMC_SDRAM device timing according to the specified
+ * parameters in the FMC_SDRAM_TimingTypeDef
+ * @param Device: Pointer to SDRAM device instance
+ * @param Timing: Pointer to SDRAM Timing structure
+ * @param Bank: SDRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr1 = 0U;
+ uint32_t tmpr2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_LOADTOACTIVE_DELAY(Timing->LoadToActiveDelay));
+ assert_param(IS_FMC_EXITSELFREFRESH_DELAY(Timing->ExitSelfRefreshDelay));
+ assert_param(IS_FMC_SELFREFRESH_TIME(Timing->SelfRefreshTime));
+ assert_param(IS_FMC_ROWCYCLE_DELAY(Timing->RowCycleDelay));
+ assert_param(IS_FMC_WRITE_RECOVERY_TIME(Timing->WriteRecoveryTime));
+ assert_param(IS_FMC_RP_DELAY(Timing->RPDelay));
+ assert_param(IS_FMC_RCD_DELAY(Timing->RCDDelay));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* Set SDRAM device timing parameters */
+ if (Bank != FMC_SDRAM_BANK2)
+ {
+ tmpr1 = Device->SDTR[FMC_SDRAM_BANK1];
+
+ /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+ tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+ FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+ FMC_SDTR1_TRCD));
+
+ tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1U) |\
+ (((Timing->ExitSelfRefreshDelay)-1U) << 4U) |\
+ (((Timing->SelfRefreshTime)-1U) << 8U) |\
+ (((Timing->RowCycleDelay)-1U) << 12U) |\
+ (((Timing->WriteRecoveryTime)-1U) <<16U) |\
+ (((Timing->RPDelay)-1U) << 20U) |\
+ (((Timing->RCDDelay)-1U) << 24U));
+ Device->SDTR[FMC_SDRAM_BANK1] = tmpr1;
+ }
+ else /* FMC_Bank2_SDRAM */
+ {
+ tmpr1 = Device->SDTR[FMC_SDRAM_BANK1];
+
+ /* Clear TRC and TRP bits */
+ tmpr1 &= ((uint32_t)~(FMC_SDTR1_TRC | FMC_SDTR1_TRP));
+
+ tmpr1 |= (uint32_t)((((Timing->RowCycleDelay)-1) << 12) |\
+ (((Timing->RPDelay)-1) << 20));
+
+ tmpr2 = Device->SDTR[FMC_SDRAM_BANK2];
+
+ /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+ tmpr2 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+ FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+ FMC_SDTR1_TRCD));
+
+ tmpr2 |= (uint32_t)((((Timing->LoadToActiveDelay)-1) |\
+ (((Timing->ExitSelfRefreshDelay)-1) << 4) |\
+ (((Timing->SelfRefreshTime)-1) << 8) |\
+ (((Timing->WriteRecoveryTime)-1) <<16) |\
+ (((Timing->RCDDelay)-1) << 24)));
+
+ Device->SDTR[FMC_SDRAM_BANK1] = tmpr1;
+ Device->SDTR[FMC_SDRAM_BANK2] = tmpr2;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FMC_SDRAM peripheral
+ * @param Device: Pointer to SDRAM device instance
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* De-initialize the SDRAM device */
+ Device->SDCR[Bank] = 0x000002D0U;
+ Device->SDTR[Bank] = 0x0FFFFFFFU;
+ Device->SDCMR = 0x00000000U;
+ Device->SDRTR = 0x00000000U;
+ Device->SDSR = 0x00000000U;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup FMC_LL_SDRAMPrivate_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FMC_SDRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FMC SDRAM interface.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Enables dynamically FMC_SDRAM write protection.
+ * @param Device: Pointer to SDRAM device instance
+ * @param Bank: SDRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* Enable write protection */
+ Device->SDCR[Bank] |= FMC_SDRAM_WRITE_PROTECTION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FMC_SDRAM write protection.
+ * @param hsdram: FMC_SDRAM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* Disable write protection */
+ Device->SDCR[Bank] &= ~FMC_SDRAM_WRITE_PROTECTION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Send Command to the FMC SDRAM bank
+ * @param Device: Pointer to SDRAM device instance
+ * @param Command: Pointer to SDRAM command structure
+ * @param Timing: Pointer to SDRAM Timing structure
+ * @param Timeout: Timeout wait value
+ * @retval HAL state
+ */
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
+{
+ __IO uint32_t tmpr = 0U;
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_COMMAND_MODE(Command->CommandMode));
+ assert_param(IS_FMC_COMMAND_TARGET(Command->CommandTarget));
+ assert_param(IS_FMC_AUTOREFRESH_NUMBER(Command->AutoRefreshNumber));
+ assert_param(IS_FMC_MODE_REGISTER(Command->ModeRegisterDefinition));
+
+ /* Set command register */
+ tmpr = (uint32_t)((Command->CommandMode) |\
+ (Command->CommandTarget) |\
+ (((Command->AutoRefreshNumber)-1U) << 5U) |\
+ ((Command->ModeRegisterDefinition) << 9U)
+ );
+
+ Device->SDCMR = tmpr;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until command is send */
+ while(HAL_IS_BIT_SET(Device->SDSR, FMC_SDSR_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Program the SDRAM Memory Refresh rate.
+ * @param Device: Pointer to SDRAM device instance
+ * @param RefreshRate: The SDRAM refresh rate value.
+ * @retval HAL state
+ */
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_REFRESH_RATE(RefreshRate));
+
+ /* Set the refresh rate in command register */
+ Device->SDRTR |= (RefreshRate<<1U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the Number of consecutive SDRAM Memory auto Refresh commands.
+ * @param Device: Pointer to SDRAM device instance
+ * @param AutoRefreshNumber: Specifies the auto Refresh number.
+ * @retval None
+ */
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber)
+{
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_AUTOREFRESH_NUMBER(AutoRefreshNumber));
+
+ /* Set the Auto-refresh number in command register */
+ Device->SDCMR |= (AutoRefreshNumber << 5U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns the indicated FMC SDRAM bank mode status.
+ * @param Device: Pointer to SDRAM device instance
+ * @param Bank: Defines the FMC SDRAM bank. This parameter can be
+ * FMC_Bank1_SDRAM or FMC_Bank2_SDRAM.
+ * @retval The FMC SDRAM bank mode status, could be on of the following values:
+ * FMC_SDRAM_NORMAL_MODE, FMC_SDRAM_SELF_REFRESH_MODE or
+ * FMC_SDRAM_POWER_DOWN_MODE.
+ */
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FMC_SDRAM_DEVICE(Device));
+ assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+ /* Get the corresponding bank mode */
+ if(Bank == FMC_SDRAM_BANK1)
+ {
+ tmpreg = (uint32_t)(Device->SDSR & FMC_SDSR_MODES1);
+ }
+ else
+ {
+ tmpreg = ((uint32_t)(Device->SDSR & FMC_SDSR_MODES2) >> 2U);
+ }
+
+ /* Return the mode status */
+ return tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED || HAL_SDRAM_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fmc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1421 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fmc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FMC_H
+#define __STM32F4xx_LL_FMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMC_LL
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Types FMC Private Types
+ * @{
+ */
+
+/**
+ * @brief FMC NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FMC_Wrap_Mode
+ This mode is not available for the STM32F446/467/479xx devices */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
+ This parameter can be a value of @ref FMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock */
+
+ uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Write_FIFO
+ This mode is available only for the STM32F446/469/479xx devices */
+
+ uint32_t PageSize; /*!< Specifies the memory page size.
+ This parameter can be a value of @ref FMC_Page_Size */
+}FMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FMC NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FMC_Access_Mode */
+}FMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_InitTypeDef;
+
+/**
+ * @brief FMC NAND/PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_PCCARD_InitTypeDef;
+
+/**
+ * @brief FMC SDRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_SDRAM_Bank */
+
+ uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */
+
+ uint32_t RowBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */
+
+ uint32_t MemoryDataWidth; /*!< Defines the memory device width.
+ This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */
+
+ uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks.
+ This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */
+
+ uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles.
+ This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */
+
+ uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode.
+ This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */
+
+ uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow
+ to disable the clock before changing frequency.
+ This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */
+
+ uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read
+ commands during the CAS latency and stores data in the Read FIFO.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */
+
+ uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */
+}FMC_SDRAM_InitTypeDef;
+
+/**
+ * @brief FMC SDRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and
+ an active or Refresh command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to
+ issuing the Activate command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock
+ cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command
+ and the delay between two consecutive Refresh commands in number of
+ memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command
+ in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write
+ command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+}FMC_SDRAM_TimingTypeDef;
+
+/**
+ * @brief SDRAM command parameters structure definition
+ */
+typedef struct
+{
+ uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */
+
+ uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Target. */
+
+ uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued
+ in auto refresh mode.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+ uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */
+}FMC_SDRAM_CommandTypeDef;
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Constants FMC Private Constants
+ * @{
+ */
+
+/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller
+ * @{
+ */
+/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank
+ * @{
+ */
+#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000U)
+#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002U)
+#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004U)
+#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing
+ * @{
+ */
+#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000U)
+#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Memory_Type FMC Memory Type
+ * @{
+ */
+#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000U)
+#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004U)
+#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width
+ * @{
+ */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access
+ * @{
+ */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040U)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode
+ * @{
+ */
+#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000U)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wrap_Mode FMC Wrap Mode
+ * @{
+ */
+/** @note This mode is not available for the STM32F446/469/479xx devices
+ */
+#define FMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Timing FMC Wait Timing
+ * @{
+ */
+#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000U)
+#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Operation FMC Write Operation
+ * @{
+ */
+#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal FMC Wait Signal
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Extended_Mode FMC Extended Mode
+ * @{
+ */
+#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait
+ * @{
+ */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000U)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Page_Size FMC Page Size
+ * @{
+ */
+#define FMC_PAGE_SIZE_NONE ((uint32_t)0x00000000U)
+#define FMC_PAGE_SIZE_128 ((uint32_t)FMC_BCR1_CPSIZE_0)
+#define FMC_PAGE_SIZE_256 ((uint32_t)FMC_BCR1_CPSIZE_1)
+#define FMC_PAGE_SIZE_512 ((uint32_t)(FMC_BCR1_CPSIZE_0 | FMC_BCR1_CPSIZE_1))
+#define FMC_PAGE_SIZE_1024 ((uint32_t)FMC_BCR1_CPSIZE_2)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_FIFO FMC Write FIFO
+ * @note These values are available only for the STM32F446/469/479xx devices.
+ * @{
+ */
+#define FMC_WRITE_FIFO_DISABLE ((uint32_t)FMC_BCR1_WFDIS)
+#define FMC_WRITE_FIFO_ENABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Burst FMC Write Burst
+ * @{
+ */
+#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Continous_Clock FMC Continuous Clock
+ * @{
+ */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000U)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Access_Mode FMC Access Mode
+ * @{
+ */
+#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000U)
+#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000U)
+#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000U)
+#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller
+ * @{
+ */
+/** @defgroup FMC_NAND_Bank FMC NAND Bank
+ * @{
+ */
+#define FMC_NAND_BANK2 ((uint32_t)0x00000010U)
+#define FMC_NAND_BANK3 ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_feature FMC Wait feature
+ * @{
+ */
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type
+ * @{
+ */
+#define FMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000U)
+#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width
+ * @{
+ */
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC FMC ECC
+ * @{
+ */
+#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000U)
+#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size
+ * @{
+ */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000U)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000U)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000U)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000U)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000U)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller
+ * @{
+ */
+/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank
+ * @{
+ */
+#define FMC_SDRAM_BANK1 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_BANK2 ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number
+ * @{
+ */
+#define FMC_SDRAM_COLUMN_BITS_NUM_8 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_COLUMN_BITS_NUM_9 ((uint32_t)0x00000001U)
+#define FMC_SDRAM_COLUMN_BITS_NUM_10 ((uint32_t)0x00000002U)
+#define FMC_SDRAM_COLUMN_BITS_NUM_11 ((uint32_t)0x00000003U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number
+ * @{
+ */
+#define FMC_SDRAM_ROW_BITS_NUM_11 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_ROW_BITS_NUM_12 ((uint32_t)0x00000004U)
+#define FMC_SDRAM_ROW_BITS_NUM_13 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width
+ * @{
+ */
+#define FMC_SDRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+#define FMC_SDRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number
+ * @{
+ */
+#define FMC_SDRAM_INTERN_BANKS_NUM_2 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_INTERN_BANKS_NUM_4 ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency
+ * @{
+ */
+#define FMC_SDRAM_CAS_LATENCY_1 ((uint32_t)0x00000080U)
+#define FMC_SDRAM_CAS_LATENCY_2 ((uint32_t)0x00000100U)
+#define FMC_SDRAM_CAS_LATENCY_3 ((uint32_t)0x00000180U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection
+ * @{
+ */
+#define FMC_SDRAM_WRITE_PROTECTION_DISABLE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_WRITE_PROTECTION_ENABLE ((uint32_t)0x00000200U)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period
+ * @{
+ */
+#define FMC_SDRAM_CLOCK_DISABLE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_CLOCK_PERIOD_2 ((uint32_t)0x00000800U)
+#define FMC_SDRAM_CLOCK_PERIOD_3 ((uint32_t)0x00000C00U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst
+ * @{
+ */
+#define FMC_SDRAM_RBURST_DISABLE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_RBURST_ENABLE ((uint32_t)0x00001000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay
+ * @{
+ */
+#define FMC_SDRAM_RPIPE_DELAY_0 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_RPIPE_DELAY_1 ((uint32_t)0x00002000U)
+#define FMC_SDRAM_RPIPE_DELAY_2 ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode
+ * @{
+ */
+#define FMC_SDRAM_CMD_NORMAL_MODE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_CMD_CLK_ENABLE ((uint32_t)0x00000001U)
+#define FMC_SDRAM_CMD_PALL ((uint32_t)0x00000002U)
+#define FMC_SDRAM_CMD_AUTOREFRESH_MODE ((uint32_t)0x00000003U)
+#define FMC_SDRAM_CMD_LOAD_MODE ((uint32_t)0x00000004U)
+#define FMC_SDRAM_CMD_SELFREFRESH_MODE ((uint32_t)0x00000005U)
+#define FMC_SDRAM_CMD_POWERDOWN_MODE ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target
+ * @{
+ */
+#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2
+#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1
+#define FMC_SDRAM_CMD_TARGET_BANK1_2 ((uint32_t)0x00000018U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status
+ * @{
+ */
+#define FMC_SDRAM_NORMAL_MODE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0
+#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Interrupt_definition FMC Interrupt definition
+ * @{
+ */
+#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008U)
+#define FMC_IT_LEVEL ((uint32_t)0x00000010U)
+#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020U)
+#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Flag_definition FMC Flag definition
+ * @{
+ */
+#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001U)
+#define FMC_FLAG_LEVEL ((uint32_t)0x00000002U)
+#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004U)
+#define FMC_FLAG_FEMPT ((uint32_t)0x00000040U)
+#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE
+#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY
+#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Alias_definition FMC Alias definition
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #define FMC_NAND_TypeDef FMC_Bank3_TypeDef
+#else
+ #define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef
+ #define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+ #define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
+ #define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
+ #define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef
+
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+ #define FMC_NAND_DEVICE FMC_Bank3
+#else
+ #define FMC_NAND_DEVICE FMC_Bank2_3
+ #define FMC_PCCARD_DEVICE FMC_Bank4
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+ #define FMC_NORSRAM_DEVICE FMC_Bank1
+ #define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E
+ #define FMC_SDRAM_DEVICE FMC_Bank5_6
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Macros FMC Private Macros
+ * @{
+ */
+
+/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN)
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->PCR &= ~FMC_PCR_PBKEN)
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN))
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FMC_PCR3_PBKEN))
+
+#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */
+/**
+ * @}
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup FMC_LL_PCCARD_Macros FMC PCCARD Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN)
+/**
+ * @}
+ */
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+/** @defgroup FMC_LL_Flag_Interrupt_Macros FMC Flag&Interrupt Macros
+ * @brief macros to handle FMC flags and interrupts
+ * @{
+ */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) ((__INSTANCE__)->SR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) ((__INSTANCE__)->SR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) ((__INSTANCE__)->SR &= ~(__FLAG__))
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+/**
+ * @brief Enable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error.
+ * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag.
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR
+ * @retval None
+ */
+#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros
+ * @{
+ */
+#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \
+ ((BANK) == FMC_NORSRAM_BANK2) || \
+ ((BANK) == FMC_NORSRAM_BANK3) || \
+ ((BANK) == FMC_NORSRAM_BANK4))
+
+#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
+
+#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
+
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \
+ ((__MODE__) == FMC_ACCESS_MODE_B) || \
+ ((__MODE__) == FMC_ACCESS_MODE_C) || \
+ ((__MODE__) == FMC_ACCESS_MODE_D))
+
+#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_NAND_BANK2) || \
+ ((BANK) == FMC_NAND_BANK3))
+
+#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+
+#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_16))
+
+#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FMC_NAND_ECC_ENABLE))
+
+#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+
+#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE)
+
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE)
+
+#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE)
+
+#define IS_FMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_PCCARD_DEVICE)
+
+#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define IS_FMC_WRAP_MODE(__MODE__) (((__MODE__) == FMC_WRAP_MODE_DISABLE) || \
+ ((__MODE__) == FMC_WRAP_MODE_ENABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \
+ ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS))
+
+#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \
+ ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \
+ ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \
+ ((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \
+ ((__BURST__) == FMC_WRITE_BURST_ENABLE))
+
+#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U)
+
+#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U))
+
+#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U))
+
+#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U)
+
+#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U))
+
+#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1U) && ((DIV) <= 16U))
+
+#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \
+ ((BANK) == FMC_SDRAM_BANK2))
+
+#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11))
+
+#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_13))
+
+#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \
+ ((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4))
+
+
+#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_3))
+
+#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDRAM_CLOCK_DISABLE) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_2) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_3))
+
+#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_SDRAM_RBURST_DISABLE) || \
+ ((RBURST) == FMC_SDRAM_RBURST_ENABLE))
+
+
+#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_SDRAM_RPIPE_DELAY_0) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_1) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_2))
+
+#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0U) && ((TIME) <= 16U))
+
+#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0U) && ((TIME) <= 16U))
+
+#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0U) && ((DELAY) <= 16U))
+
+#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_SDRAM_CMD_NORMAL_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_CLK_ENABLE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_PALL) || \
+ ((COMMAND) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_LOAD_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_POWERDOWN_MODE))
+
+#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK2) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1_2))
+
+#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0U) && ((NUMBER) <= 16U))
+
+#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191U)
+
+#define IS_FMC_REFRESH_RATE(RATE) ((RATE) <= 8191U)
+
+#define IS_FMC_SDRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_SDRAM_DEVICE)
+
+#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \
+ ((WRITE) == FMC_SDRAM_WRITE_PROTECTION_ENABLE))
+
+#define IS_FMC_PAGESIZE(SIZE) (((SIZE) == FMC_PAGE_SIZE_NONE) || \
+ ((SIZE) == FMC_PAGE_SIZE_128) || \
+ ((SIZE) == FMC_PAGE_SIZE_256) || \
+ ((SIZE) == FMC_PAGE_SIZE_512) || \
+ ((SIZE) == FMC_PAGE_SIZE_1024))
+
+#if defined (STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_FMC_WRITE_FIFO(FIFO) (((FIFO) == FMC_WRITE_FIFO_DISABLE) || \
+ ((FIFO) == FMC_WRITE_FIFO_ENABLE))
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions
+ * @{
+ */
+
+/** @defgroup FMC_LL_NORSRAM NOR SRAM
+ * @{
+ */
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND NAND
+ * @{
+ */
+/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup FMC_LL_PCCARD PCCARD
+ * @{
+ */
+/** @defgroup FMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @defgroup FMC_LL_SDRAM SDRAM
+ * @{
+ */
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate);
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber);
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1026 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fsmc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief FSMC Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories:
+ * + Initialization/de-initialization functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FSMC peripheral features #####
+ ==============================================================================
+ [..] The Flexible static memory controller (FSMC) includes two memory controllers:
+ (+) The NOR/PSRAM memory controller
+ (+) The NAND/PC Card memory controller
+
+ [..] The FSMC functional block makes the interface with synchronous and asynchronous static
+ memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
+ (+) to translate AHB transactions into the appropriate external device protocol.
+ (+) to meet the access time requirements of the external memory devices.
+
+ [..] All external memories share the addresses, data and control signals with the controller.
+ Each external device is accessed by means of a unique Chip Select. The FSMC performs
+ only one access at a time to an external device.
+ The main features of the FSMC controller are the following:
+ (+) Interface with static-memory mapped devices including:
+ (++) Static random access memory (SRAM).
+ (++) Read-only memory (ROM).
+ (++) NOR Flash memory/OneNAND Flash memory.
+ (++) PSRAM (4 memory banks).
+ (++) 16-bit PC Card compatible devices.
+ (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
+ data.
+ (+) Independent Chip Select control for each memory bank.
+ (+) Independent configuration for each memory bank.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FSMC_LL FSMC Low Layer
+ * @brief FSMC driver modules
+ * @{
+ */
+
+#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup FSMC_LL_Private_Functions
+ * @{
+ */
+
+/** @addtogroup FSMC_LL_NORSRAM
+ * @brief NORSRAM Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NORSRAM device driver #####
+ ==============================================================================
+
+ [..]
+ This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order
+ to run the NORSRAM external devices.
+
+ (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit()
+ (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init()
+ (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init()
+ (+) FSMC NORSRAM bank extended timing configuration using the function
+ FSMC_NORSRAM_Extended_Timing_Init()
+ (+) FSMC NORSRAM bank enable/disable write operation using the functions
+ FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable()
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FSMC NORSRAM interface
+ (+) De-initialize the FSMC NORSRAM interface
+ (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the FSMC_NORSRAM device according to the specified
+ * control parameters in the FSMC_NORSRAM_InitTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Init: Pointer to NORSRAM Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef* Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank));
+ assert_param(IS_FSMC_MUX(Init->DataAddressMux));
+ assert_param(IS_FSMC_MEMORY(Init->MemoryType));
+ assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode));
+ assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity));
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode));
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+ assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
+ assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation));
+ assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal));
+ assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode));
+ assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
+ assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
+ assert_param(IS_FSMC_PAGESIZE(Init->PageSize));
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+ assert_param(IS_FSMC_WRITE_FIFO(Init->WriteFifo));
+ assert_param(IS_FSMC_CONTINOUS_CLOCK(Init->ContinuousClock));
+#endif /* STM32F412Zx || TM32F412Vx */
+
+ /* Get the BTCR register value */
+ tmpr = Device->BTCR[Init->NSBank];
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN,
+ WAITEN, EXTMOD, ASYNCWAIT, CPSIZE and CBURSTRW bits */
+ tmpr &= ((uint32_t)~(FSMC_BCR1_MBKEN | FSMC_BCR1_MUXEN | FSMC_BCR1_MTYP | \
+ FSMC_BCR1_MWID | FSMC_BCR1_FACCEN | FSMC_BCR1_BURSTEN | \
+ FSMC_BCR1_WAITPOL | FSMC_BCR1_WRAPMOD | FSMC_BCR1_WAITCFG | \
+ FSMC_BCR1_WREN | FSMC_BCR1_WAITEN | FSMC_BCR1_EXTMOD | \
+ FSMC_BCR1_ASYNCWAIT | FSMC_BCR1_CPSIZE | FSMC_BCR1_CBURSTRW));
+ /* Set NORSRAM device control parameters */
+ tmpr |= (uint32_t)(Init->DataAddressMux |\
+ Init->MemoryType |\
+ Init->MemoryDataWidth |\
+ Init->BurstAccessMode |\
+ Init->WaitSignalPolarity |\
+ Init->WrapMode |\
+ Init->WaitSignalActive |\
+ Init->WriteOperation |\
+ Init->WaitSignal |\
+ Init->ExtendedMode |\
+ Init->AsynchronousWait |\
+ Init->PageSize |\
+ Init->WriteBurst
+ );
+#else /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+ /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WAITCFG, WREN,
+ WAITEN, EXTMOD, ASYNCWAIT,CPSIZE, CBURSTRW, CCLKEN and WFDIS bits */
+ tmpr &= ((uint32_t)~(FSMC_BCR1_MBKEN | FSMC_BCR1_MUXEN | FSMC_BCR1_MTYP | \
+ FSMC_BCR1_MWID | FSMC_BCR1_FACCEN | FSMC_BCR1_BURSTEN | \
+ FSMC_BCR1_WAITPOL | FSMC_BCR1_WAITCFG | FSMC_BCR1_WREN | \
+ FSMC_BCR1_WAITEN | FSMC_BCR1_EXTMOD | FSMC_BCR1_ASYNCWAIT | \
+ FSMC_BCR1_CPSIZE | FSMC_BCR1_CBURSTRW | FSMC_BCR1_CCLKEN | \
+ FSMC_BCR1_WFDIS));
+ /* Set NORSRAM device control parameters */
+ tmpr |= (uint32_t)(Init->DataAddressMux |\
+ Init->MemoryType |\
+ Init->MemoryDataWidth |\
+ Init->BurstAccessMode |\
+ Init->WaitSignalPolarity |\
+ Init->WaitSignalActive |\
+ Init->WriteOperation |\
+ Init->WaitSignal |\
+ Init->ExtendedMode |\
+ Init->AsynchronousWait |\
+ Init->WriteBurst |\
+ Init->ContinuousClock |\
+ Init->PageSize |\
+ Init->WriteFifo);
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+ if(Init->MemoryType == FSMC_MEMORY_TYPE_NOR)
+ {
+ tmpr |= (uint32_t)FSMC_NORSRAM_FLASH_ACCESS_ENABLE;
+ }
+
+ Device->BTCR[Init->NSBank] = tmpr;
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+ /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */
+ if((Init->ContinuousClock == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FSMC_NORSRAM_BANK1))
+ {
+ Device->BTCR[FSMC_NORSRAM_BANK1] |= (uint32_t)(Init->ContinuousClock);
+ }
+
+ if(Init->NSBank != FSMC_NORSRAM_BANK1)
+ {
+ Device->BTCR[FSMC_NORSRAM_BANK1] |= (uint32_t)(Init->WriteFifo);
+ }
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the FSMC_NORSRAM peripheral
+ * @param Device: Pointer to NORSRAM device instance
+ * @param ExDevice: Pointer to NORSRAM extended mode device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Disable the FSMC_NORSRAM device */
+ __FSMC_NORSRAM_DISABLE(Device, Bank);
+
+ /* De-initialize the FSMC_NORSRAM device */
+ /* FSMC_NORSRAM_BANK1 */
+ if(Bank == FSMC_NORSRAM_BANK1)
+ {
+ Device->BTCR[Bank] = 0x000030DBU;
+ }
+ /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */
+ else
+ {
+ Device->BTCR[Bank] = 0x000030D2U;
+ }
+
+ Device->BTCR[Bank + 1U] = 0x0FFFFFFFU;
+ ExDevice->BWTR[Bank] = 0x0FFFFFFFU;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initialize the FSMC_NORSRAM Timing according to the specified
+ * parameters in the FSMC_NORSRAM_TimingTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Timing: Pointer to NORSRAM Timing structure
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+ assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+ assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
+ assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Get the BTCR register value */
+ tmpr = Device->BTCR[Bank + 1U];
+
+ /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+ tmpr &= ((uint32_t)~(FSMC_BTR1_ADDSET | FSMC_BTR1_ADDHLD | FSMC_BTR1_DATAST | \
+ FSMC_BTR1_BUSTURN | FSMC_BTR1_CLKDIV | FSMC_BTR1_DATLAT | \
+ FSMC_BTR1_ACCMOD));
+
+ /* Set FSMC_NORSRAM device timing parameters */
+ tmpr |= (uint32_t)(Timing->AddressSetupTime |\
+ ((Timing->AddressHoldTime) << 4U) |\
+ ((Timing->DataSetupTime) << 8U) |\
+ ((Timing->BusTurnAroundDuration) << 16U) |\
+ (((Timing->CLKDivision)-1U) << 20U) |\
+ (((Timing->DataLatency)-2U) << 24U) |\
+ (Timing->AccessMode));
+
+ Device->BTCR[Bank + 1] = tmpr;
+
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+ /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */
+ if(HAL_IS_BIT_SET(Device->BTCR[FSMC_NORSRAM_BANK1], FSMC_BCR1_CCLKEN))
+ {
+ tmpr = (uint32_t)(Device->BTCR[FSMC_NORSRAM_BANK1 + 1U] & ~(((uint32_t)0x0FU) << 20U));
+ tmpr |= (uint32_t)(((Timing->CLKDivision)-1U) << 20U);
+ Device->BTCR[FSMC_NORSRAM_BANK1 + 1U] = tmpr;
+ }
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified
+ * parameters in the FSMC_NORSRAM_TimingTypeDef
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Timing: Pointer to NORSRAM Timing structure
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode));
+
+ /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+ if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE)
+ {
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(Device));
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+ assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+ assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Get the BWTR register value */
+ tmpr = Device->BWTR[Bank];
+
+ /* Clear ADDSET, ADDHLD, DATAST, BUSTURN and ACCMOD bits */
+ tmpr &= ((uint32_t)~(FSMC_BWTR1_ADDSET | FSMC_BWTR1_ADDHLD | FSMC_BWTR1_DATAST | \
+ FSMC_BWTR1_BUSTURN | FSMC_BWTR1_ACCMOD));
+
+ tmpr |= (uint32_t)(Timing->AddressSetupTime |\
+ ((Timing->AddressHoldTime) << 4U) |\
+ ((Timing->DataSetupTime) << 8U) |\
+ ((Timing->BusTurnAroundDuration) << 16U) |\
+ (Timing->AccessMode));
+
+ Device->BWTR[Bank] = tmpr;
+ }
+ else
+ {
+ Device->BWTR[Bank] = 0x0FFFFFFFU;
+ }
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FSMC_NORSRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FSMC NORSRAM interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically FSMC_NORSRAM write operation.
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Enable write operation */
+ Device->BTCR[Bank] |= FSMC_WRITE_OPERATION_ENABLE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FSMC_NORSRAM write operation.
+ * @param Device: Pointer to NORSRAM device instance
+ * @param Bank: NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Disable write operation */
+ Device->BTCR[Bank] &= ~FSMC_WRITE_OPERATION_ENABLE;
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/** @addtogroup FSMC_LL_NAND
+ * @brief NAND Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NAND device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FSMC NAND banks in order
+ to run the NAND external devices.
+
+ (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit()
+ (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init()
+ (+) FSMC NAND bank common space timing configuration using the function
+ FSMC_NAND_CommonSpace_Timing_Init()
+ (+) FSMC NAND bank attribute space timing configuration using the function
+ FSMC_NAND_AttributeSpace_Timing_Init()
+ (+) FSMC NAND bank enable/disable ECC correction feature using the functions
+ FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable()
+ (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC()
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FSMC_LL_NAND_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FSMC NAND interface
+ (+) De-initialize the FSMC NAND interface
+ (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FSMC_NAND device according to the specified
+ * control parameters in the FSMC_NAND_HandleTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Init: Pointer to NAND Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_BANK(Init->NandBank));
+ assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FSMC_ECC_STATE(Init->EccComputation));
+ assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize));
+ assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+ if(Init->NandBank == FSMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PCR2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PCR3;
+ }
+
+ /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+ tmpr &= ((uint32_t)~(FSMC_PCR2_PWAITEN | FSMC_PCR2_PBKEN | FSMC_PCR2_PTYP | \
+ FSMC_PCR2_PWID | FSMC_PCR2_ECCEN | FSMC_PCR2_TCLR | \
+ FSMC_PCR2_TAR | FSMC_PCR2_ECCPS));
+
+ /* Set NAND device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FSMC_PCR_MEMORY_TYPE_NAND |\
+ Init->MemoryDataWidth |\
+ Init->EccComputation |\
+ Init->ECCPageSize |\
+ ((Init->TCLRSetupTime) << 9U) |\
+ ((Init->TARSetupTime) << 13U));
+
+ if(Init->NandBank == FSMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PCR2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PCR3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_NAND Common space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PMEM2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PMEM3;
+ }
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FSMC_PMEM2_MEMSET2 | FSMC_PMEM2_MEMWAIT2 | FSMC_PMEM2_MEMHOLD2 | \
+ FSMC_PMEM2_MEMHIZ2));
+
+ /* Set FSMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U)
+ );
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PMEM2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PMEM3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_NAND Attribute space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to NAND device instance
+ * @param Timing: Pointer to NAND timing structure
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* Get the NAND bank 2 register value */
+ tmpr = Device->PATT2;
+ }
+ else
+ {
+ /* Get the NAND bank 3 register value */
+ tmpr = Device->PATT3;
+ }
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FSMC_PATT2_ATTSET2 | FSMC_PATT2_ATTWAIT2 | FSMC_PATT2_ATTHOLD2 | \
+ FSMC_PATT2_ATTHIZ2));
+
+ /* Set FSMC_NAND device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U)
+ );
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ Device->PATT2 = tmpr;
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ Device->PATT3 = tmpr;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FSMC_NAND device
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Disable the NAND Bank */
+ __FSMC_NAND_DISABLE(Device, Bank);
+
+ /* De-initialize the NAND Bank */
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* Set the FSMC_NAND_BANK2 registers to their reset values */
+ Device->PCR2 = 0x00000018U;
+ Device->SR2 = 0x00000040U;
+ Device->PMEM2 = 0xFCFCFCFCU;
+ Device->PATT2 = 0xFCFCFCFCU;
+ }
+ /* FSMC_Bank3_NAND */
+ else
+ {
+ /* Set the FSMC_NAND_BANK3 registers to their reset values */
+ Device->PCR3 = 0x00000018U;
+ Device->SR3 = 0x00000040U;
+ Device->PMEM3 = 0xFCFCFCFCU;
+ Device->PATT3 = 0xFCFCFCFCU;
+ }
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @addtogroup FSMC_LL_NAND_Private_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FSMC_NAND Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FSMC NAND interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically FSMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Enable ECC feature */
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ Device->PCR2 |= FSMC_PCR2_ECCEN;
+ }
+ else
+ {
+ Device->PCR3 |= FSMC_PCR3_ECCEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FSMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param Bank: NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Disable ECC feature */
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ Device->PCR2 &= ~FSMC_PCR2_ECCEN;
+ }
+ else
+ {
+ Device->PCR3 &= ~FSMC_PCR3_ECCEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FSMC_NAND ECC feature.
+ * @param Device: Pointer to NAND device instance
+ * @param ECCval: Pointer to ECC value
+ * @param Bank: NAND bank number
+ * @param Timeout: Timeout wait value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_DEVICE(Device));
+ assert_param(IS_FSMC_NAND_BANK(Bank));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until FIFO is empty */
+ while(__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ if(Bank == FSMC_NAND_BANK2)
+ {
+ /* Get the ECCR2 register value */
+ *ECCval = (uint32_t)Device->ECCR2;
+ }
+ else
+ {
+ /* Get the ECCR3 register value */
+ *ECCval = (uint32_t)Device->ECCR3;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FSMC_LL_PCCARD
+ * @brief PCCARD Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use PCCARD device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FSMC PCCARD bank in order
+ to run the PCCARD/compact flash external devices.
+
+ (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit()
+ (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init()
+ (+) FSMC PCCARD bank common space timing configuration using the function
+ FSMC_PCCARD_CommonSpace_Timing_Init()
+ (+) FSMC PCCARD bank attribute space timing configuration using the function
+ FSMC_PCCARD_AttributeSpace_Timing_Init()
+ (+) FSMC PCCARD bank IO space timing configuration using the function
+ FSMC_PCCARD_IOSpace_Timing_Init()
+
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FSMC_LL_PCCARD_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FSMC PCCARD interface
+ (+) De-initialize the FSMC PCCARD interface
+ (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FSMC_PCCARD device according to the specified
+ * control parameters in the FSMC_PCCARD_HandleTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Init: Pointer to PCCARD Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+ /* Get PCCARD control register value */
+ tmpr = Device->PCR4;
+
+ /* Clear TAR, TCLR, PWAITEN and PWID bits */
+ tmpr &= ((uint32_t)~(FSMC_PCR4_TAR | FSMC_PCR4_TCLR | FSMC_PCR4_PWAITEN | \
+ FSMC_PCR4_PWID));
+
+ /* Set FSMC_PCCARD device control parameters */
+ tmpr |= (uint32_t)(Init->Waitfeature |\
+ FSMC_NAND_PCC_MEM_BUS_WIDTH_16 |\
+ (Init->TCLRSetupTime << 9U) |\
+ (Init->TARSetupTime << 13U));
+
+ Device->PCR4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_PCCARD Common space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get PCCARD common space timing register value */
+ tmpr = Device->PMEM4;
+
+ /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+ tmpr &= ((uint32_t)~(FSMC_PMEM4_MEMSET4 | FSMC_PMEM4_MEMWAIT4 | FSMC_PMEM4_MEMHOLD4 | \
+ FSMC_PMEM4_MEMHIZ4));
+ /* Set PCCARD timing parameters */
+ tmpr |= (uint32_t)((Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ (Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ Device->PMEM4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_PCCARD Attribute space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get PCCARD timing parameters */
+ tmpr = Device->PATT4;
+
+ /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+ tmpr &= ((uint32_t)~(FSMC_PATT4_ATTSET4 | FSMC_PATT4_ATTWAIT4 | FSMC_PATT4_ATTHOLD4 | \
+ FSMC_PATT4_ATTHIZ4));
+
+ /* Set PCCARD timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+ Device->PATT4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_PCCARD IO space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device: Pointer to PCCARD device instance
+ * @param Timing: Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ uint32_t tmpr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Get FSMC_PCCARD device timing parameters */
+ tmpr = Device->PIO4;
+
+ /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */
+ tmpr &= ((uint32_t)~(FSMC_PIO4_IOSET4 | FSMC_PIO4_IOWAIT4 | FSMC_PIO4_IOHOLD4 | \
+ FSMC_PIO4_IOHIZ4));
+
+ /* Set FSMC_PCCARD device timing parameters */
+ tmpr |= (uint32_t)(Timing->SetupTime |\
+ ((Timing->WaitSetupTime) << 8U) |\
+ ((Timing->HoldSetupTime) << 16U) |\
+ ((Timing->HiZSetupTime) << 24U));
+
+ Device->PIO4 = tmpr;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FSMC_PCCARD device
+ * @param Device: Pointer to PCCARD device instance
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device)
+{
+ /* Disable the FSMC_PCCARD device */
+ __FSMC_PCCARD_DISABLE(Device);
+
+ /* De-initialize the FSMC_PCCARD device */
+ Device->PCR4 = 0x00000018U;
+ Device->SR4 = 0x00000000U;
+ Device->PMEM4 = 0xFCFCFCFCU;
+ Device->PATT4 = 0xFCFCFCFCU;
+ Device->PIO4 = 0xFCFCFCFCU;
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_fsmc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1049 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fsmc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of FSMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FSMC_H
+#define __STM32F4xx_LL_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FSMC_LL
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Types FSMC Private Types
+ * @{
+ */
+
+/**
+ * @brief FSMC NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FSMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wrap_Mode
+ This mode is available only for the STM32F405/407/4015/417xx devices */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC.
+ This parameter can be a value of @ref FSMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FSMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FSMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock
+ This mode is available only for the STM32F412Vx/Zx/Rx devices */
+
+ uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Write_FIFO
+ This mode is available only for the STM32F412Vx/Vx devices */
+
+ uint32_t PageSize; /*!< Specifies the memory page size.
+ This parameter can be a value of @ref FMC_Page_Size */
+}FSMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FSMC NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FSMC_Access_Mode */
+
+}FSMC_NORSRAM_TimingTypeDef;
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/**
+ * @brief FSMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FSMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FSMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FSMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_InitTypeDef;
+
+/**
+ * @brief FSMC NAND/PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FSMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_PCCARD_InitTypeDef;
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Constants FSMC Private Constants
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller
+ * @{
+ */
+/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank
+ * @{
+ */
+#define FSMC_NORSRAM_BANK1 ((uint32_t)0x00000000U)
+#define FSMC_NORSRAM_BANK2 ((uint32_t)0x00000002U)
+#define FSMC_NORSRAM_BANK3 ((uint32_t)0x00000004U)
+#define FSMC_NORSRAM_BANK4 ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing
+ * @{
+ */
+#define FSMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Memory_Type FSMC Memory Type
+ * @{
+ */
+#define FSMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000U)
+#define FSMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004U)
+#define FSMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Data_Width FSMC NOR/SRAM Data Width
+ * @{
+ */
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access
+ * @{
+ */
+#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040U)
+#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode
+ * @{
+ */
+#define FSMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000U)
+#define FSMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode
+ * @note These values are available only for the STM32F405/415/407/417xx devices.
+ * @{
+ */
+#define FSMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Timing FSMC Wait Timing
+ * @{
+ */
+#define FSMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000U)
+#define FSMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Operation FSMC Write Operation
+ * @{
+ */
+#define FSMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal FSMC Wait Signal
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Extended_Mode FSMC Extended Mode
+ * @{
+ */
+#define FSMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait
+ * @{
+ */
+#define FSMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Page_Size FSMC Page Size
+ * @{
+ */
+#define FSMC_PAGE_SIZE_NONE ((uint32_t)0x00000000U)
+#define FSMC_PAGE_SIZE_128 ((uint32_t)FSMC_BCR1_CPSIZE_0)
+#define FSMC_PAGE_SIZE_256 ((uint32_t)FSMC_BCR1_CPSIZE_1)
+#define FSMC_PAGE_SIZE_512 ((uint32_t)(FSMC_BCR1_CPSIZE_0 | FSMC_BCR1_CPSIZE_1))
+#define FSMC_PAGE_SIZE_1024 ((uint32_t)FSMC_BCR1_CPSIZE_2)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_FIFO FSMC Write FIFO
+ * @note These values are available only for the STM32F412Vx/Zx/Rx devices.
+ * @{
+ */
+#define FSMC_WRITE_FIFO_DISABLE ((uint32_t)FSMC_BCR1_WFDIS)
+#define FSMC_WRITE_FIFO_ENABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Burst FSMC Write Burst
+ * @{
+ */
+#define FSMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Continous_Clock FSMC Continous Clock
+ * @note These values are available only for the STM32F412Vx/Zx/Rx devices.
+ * @{
+ */
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000U)
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Access_Mode FSMC Access Mode
+ * @{
+ */
+#define FSMC_ACCESS_MODE_A ((uint32_t)0x00000000U)
+#define FSMC_ACCESS_MODE_B ((uint32_t)0x10000000U)
+#define FSMC_ACCESS_MODE_C ((uint32_t)0x20000000U)
+#define FSMC_ACCESS_MODE_D ((uint32_t)0x30000000U)
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/** @defgroup FSMC_LL_NAND_Controller FSMC NAND and PCCARD Controller
+ * @{
+ */
+/** @defgroup FSMC_NAND_Bank FSMC NAND Bank
+ * @{
+ */
+#define FSMC_NAND_BANK2 ((uint32_t)0x00000010U)
+#define FSMC_NAND_BANK3 ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_feature FSMC Wait feature
+ * @{
+ */
+#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type
+ * @{
+ */
+#define FSMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000U)
+#define FSMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Data_Width FSMC NAND Data Width
+ * @{
+ */
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC FSMC ECC
+ * @{
+ */
+#define FSMC_NAND_ECC_DISABLE ((uint32_t)0x00000000U)
+#define FSMC_NAND_ECC_ENABLE ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC_Page_Size FSMC ECC Page Size
+ * @{
+ */
+#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000U)
+#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000U)
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/** @defgroup FSMC_LL_Interrupt_definition FSMC Interrupt definition
+ * @{
+ */
+#define FSMC_IT_RISING_EDGE ((uint32_t)0x00000008U)
+#define FSMC_IT_LEVEL ((uint32_t)0x00000010U)
+#define FSMC_IT_FALLING_EDGE ((uint32_t)0x00000020U)
+#define FSMC_IT_REFRESH_ERROR ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Flag_definition FSMC Flag definition
+ * @{
+ */
+#define FSMC_FLAG_RISING_EDGE ((uint32_t)0x00000001U)
+#define FSMC_FLAG_LEVEL ((uint32_t)0x00000002U)
+#define FSMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004U)
+#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Alias_definition FSMC Alias definition
+ * @{
+ */
+#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef
+#define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FSMC_NORSRAM_DEVICE FSMC_Bank1
+#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FSMC_NAND_DEVICE FSMC_Bank2_3
+#define FSMC_PCCARD_DEVICE FSMC_Bank4
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 FSMC_NORSRAM_MEM_BUS_WIDTH_8
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 FSMC_NORSRAM_MEM_BUS_WIDTH_16
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 FSMC_NORSRAM_MEM_BUS_WIDTH_32
+
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NORSRAM_InitTypeDef FSMC_NORSRAM_InitTypeDef
+#define FMC_NORSRAM_TimingTypeDef FSMC_NORSRAM_TimingTypeDef
+
+#define FMC_NORSRAM_Init FSMC_NORSRAM_Init
+#define FMC_NORSRAM_Timing_Init FSMC_NORSRAM_Timing_Init
+#define FMC_NORSRAM_Extended_Timing_Init FSMC_NORSRAM_Extended_Timing_Init
+#define FMC_NORSRAM_DeInit FSMC_NORSRAM_DeInit
+#define FMC_NORSRAM_WriteOperation_Enable FSMC_NORSRAM_WriteOperation_Enable
+#define FMC_NORSRAM_WriteOperation_Disable FSMC_NORSRAM_WriteOperation_Disable
+
+#define __FMC_NORSRAM_ENABLE __FSMC_NORSRAM_ENABLE
+#define __FMC_NORSRAM_DISABLE __FSMC_NORSRAM_DISABLE
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FMC_NAND_InitTypeDef FSMC_NAND_InitTypeDef
+#define FMC_PCCARD_InitTypeDef FSMC_PCCARD_InitTypeDef
+#define FMC_NAND_PCC_TimingTypeDef FSMC_NAND_PCC_TimingTypeDef
+
+#define FMC_NAND_Init FSMC_NAND_Init
+#define FMC_NAND_CommonSpace_Timing_Init FSMC_NAND_CommonSpace_Timing_Init
+#define FMC_NAND_AttributeSpace_Timing_Init FSMC_NAND_AttributeSpace_Timing_Init
+#define FMC_NAND_DeInit FSMC_NAND_DeInit
+#define FMC_NAND_ECC_Enable FSMC_NAND_ECC_Enable
+#define FMC_NAND_ECC_Disable FSMC_NAND_ECC_Disable
+#define FMC_NAND_GetECC FSMC_NAND_GetECC
+#define FMC_PCCARD_Init FSMC_PCCARD_Init
+#define FMC_PCCARD_CommonSpace_Timing_Init FSMC_PCCARD_CommonSpace_Timing_Init
+#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init
+#define FMC_PCCARD_IOSpace_Timing_Init FSMC_PCCARD_IOSpace_Timing_Init
+#define FMC_PCCARD_DeInit FSMC_PCCARD_DeInit
+
+#define __FMC_NAND_ENABLE __FSMC_NAND_ENABLE
+#define __FMC_NAND_DISABLE __FSMC_NAND_DISABLE
+#define __FMC_PCCARD_ENABLE __FSMC_PCCARD_ENABLE
+#define __FMC_PCCARD_DISABLE __FSMC_PCCARD_DISABLE
+#define __FMC_NAND_ENABLE_IT __FSMC_NAND_ENABLE_IT
+#define __FMC_NAND_DISABLE_IT __FSMC_NAND_DISABLE_IT
+#define __FMC_NAND_GET_FLAG __FSMC_NAND_GET_FLAG
+#define __FMC_NAND_CLEAR_FLAG __FSMC_NAND_CLEAR_FLAG
+#define __FMC_PCCARD_ENABLE_IT __FSMC_PCCARD_ENABLE_IT
+#define __FMC_PCCARD_DISABLE_IT __FSMC_PCCARD_DISABLE_IT
+#define __FMC_PCCARD_GET_FLAG __FSMC_PCCARD_GET_FLAG
+#define __FMC_PCCARD_CLEAR_FLAG __FSMC_PCCARD_CLEAR_FLAG
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FMC_NAND_TypeDef FSMC_NAND_TypeDef
+#define FMC_PCCARD_TypeDef FSMC_PCCARD_TypeDef
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FMC_NORSRAM_DEVICE FSMC_NORSRAM_DEVICE
+#define FMC_NORSRAM_EXTENDED_DEVICE FSMC_NORSRAM_EXTENDED_DEVICE
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FMC_NAND_DEVICE FSMC_NAND_DEVICE
+#define FMC_PCCARD_DEVICE FSMC_PCCARD_DEVICE
+
+#define FMC_NAND_BANK2 FSMC_NAND_BANK2
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#define FMC_NORSRAM_BANK1 FSMC_NORSRAM_BANK1
+#define FMC_NORSRAM_BANK2 FSMC_NORSRAM_BANK2
+#define FMC_NORSRAM_BANK3 FSMC_NORSRAM_BANK3
+
+#define FMC_IT_RISING_EDGE FSMC_IT_RISING_EDGE
+#define FMC_IT_LEVEL FSMC_IT_LEVEL
+#define FMC_IT_FALLING_EDGE FSMC_IT_FALLING_EDGE
+#define FMC_IT_REFRESH_ERROR FSMC_IT_REFRESH_ERROR
+
+#define FMC_FLAG_RISING_EDGE FSMC_FLAG_RISING_EDGE
+#define FMC_FLAG_LEVEL FSMC_FLAG_LEVEL
+#define FMC_FLAG_FALLING_EDGE FSMC_FLAG_FALLING_EDGE
+#define FMC_FLAG_FEMPT FSMC_FLAG_FEMPT
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Macros FSMC Private Macros
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Exported Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FSMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FSMC_BCR1_MBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN))
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FSMC_PCR3_PBKEN))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_PCCARD_Macros FSMC PCCARD Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Flag_Interrupt_Macros FSMC Flag&Interrupt Macros
+ * @brief macros to handle FSMC flags and interrupts
+ * @{
+ */
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__ : FSMC_NAND Bank
+ * @param __FLAG__ : FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __FLAG__: FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros
+ * @{
+ */
+#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \
+ ((__BANK__) == FSMC_NORSRAM_BANK2) || \
+ ((__BANK__) == FSMC_NORSRAM_BANK3) || \
+ ((__BANK__) == FSMC_NORSRAM_BANK4))
+
+#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE))
+
+#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \
+ ((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \
+ ((__MEMORY__) == FSMC_MEMORY_TYPE_NOR))
+
+#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \
+ ((__MODE__) == FSMC_ACCESS_MODE_B) || \
+ ((__MODE__) == FSMC_ACCESS_MODE_C) || \
+ ((__MODE__) == FSMC_ACCESS_MODE_D))
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_NAND_BANK2) || \
+ ((BANK) == FSMC_NAND_BANK3))
+
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+
+#define IS_FSMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16))
+
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FSMC_NAND_ECC_ENABLE))
+
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 255U)
+
+#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE)
+
+#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE)
+
+#define IS_FSMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NAND_DEVICE)
+
+#define IS_FSMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FSMC_PCCARD_DEVICE)
+
+#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \
+ ((__MODE__) == FSMC_WRAP_MODE_ENABLE))
+
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \
+ ((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS))
+
+#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \
+ ((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \
+ ((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \
+ ((__MODE__) == FSMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U))
+
+#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \
+ ((__BURST__) == FSMC_WRITE_BURST_ENABLE))
+
+#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U)
+
+#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U))
+
+#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U))
+
+#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U)
+
+#define IS_FSMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+#define IS_FSMC_CLK_DIV(DIV) (((DIV) > 1U) && ((DIV) <= 16U))
+
+#define IS_FSMC_PAGESIZE(SIZE) (((SIZE) == FSMC_PAGE_SIZE_NONE) || \
+ ((SIZE) == FSMC_PAGE_SIZE_128) || \
+ ((SIZE) == FSMC_PAGE_SIZE_256) || \
+ ((SIZE) == FSMC_PAGE_SIZE_1024))
+
+#define IS_FSMC_WRITE_FIFO(FIFO) (((FIFO) == FSMC_WRITE_FIFO_DISABLE) || \
+ ((FIFO) == FSMC_WRITE_FIFO_ENABLE))
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Functions FSMC LL Private Functions
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NORSRAM NOR SRAM
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/** @defgroup FSMC_LL_NAND NAND
+ * @{
+ */
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_PCCARD PCCARD
+ * @{
+ */
+/** @defgroup FSMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FSMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,511 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_sdmmc.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief SDMMC Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the SDMMC peripheral:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SDMMC peripheral features #####
+ ==============================================================================
+ [..] The SD/SDIO MMC card host interface (SDIO) provides an interface between the APB2
+ peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDIO cards and CE-ATA
+ devices.
+
+ [..] The SDIO features include the following:
+ (+) Full compliance with MultiMedia Card System Specification Version 4.2. Card support
+ for three different databus modes: 1-bit (default), 4-bit and 8-bit
+ (+) Full compatibility with previous versions of MultiMedia Cards (forward compatibility)
+ (+) Full compliance with SD Memory Card Specifications Version 2.0
+ (+) Full compliance with SD I/O Card Specification Version 2.0: card support for two
+ different data bus modes: 1-bit (default) and 4-bit
+ (+) Full support of the CE-ATA features (full compliance with CE-ATA digital protocol
+ Rev1.1)
+ (+) Data transfer up to 48 MHz for the 8 bit mode
+ (+) Data and command output enable signals to control external bidirectional drivers.
+
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver is a considered as a driver of service for external devices drivers
+ that interfaces with the SDIO peripheral.
+ According to the device used (SD card/ MMC card / SDIO card ...), a set of APIs
+ is used in the device's driver to perform SDIO operations and functionalities.
+
+ This driver is almost transparent for the final user, it is only used to implement other
+ functionalities of the external device.
+
+ [..]
+ (+) The SDIO clock (SDIOCLK = 48 MHz) is coming from a specific output of PLL
+ (PLL48CLK). Before start working with SDIO peripheral make sure that the
+ PLL is well configured.
+ The SDIO peripheral uses two clock signals:
+ (++) SDIO adapter clock (SDIOCLK = 48 MHz)
+ (++) APB2 bus clock (PCLK2)
+
+ -@@- PCLK2 and SDIO_CK clock frequencies must respect the following condition:
+ Frequency(PCLK2) >= (3 / 8 x Frequency(SDIO_CK))
+
+ (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDIO
+ peripheral.
+
+ (+) Enable the Power ON State using the SDIO_PowerState_ON(SDIOx)
+ function and disable it using the function SDIO_PowerState_OFF(SDIOx).
+
+ (+) Enable/Disable the clock using the __SDIO_ENABLE()/__SDIO_DISABLE() macros.
+
+ (+) Enable/Disable the peripheral interrupts using the macros __SDIO_ENABLE_IT(hsdio, IT)
+ and __SDIO_DISABLE_IT(hsdio, IT) if you need to use interrupt mode.
+
+ (+) When using the DMA mode
+ (++) Configure the DMA in the MSP layer of the external device
+ (++) Active the needed channel Request
+ (++) Enable the DMA using __SDIO_DMA_ENABLE() macro or Disable it using the macro
+ __SDIO_DMA_DISABLE().
+
+ (+) To control the CPSM (Command Path State Machine) and send
+ commands to the card use the SDIO_SendCommand(SDIOx),
+ SDIO_GetCommandResponse() and SDIO_GetResponse() functions. First, user has
+ to fill the command structure (pointer to SDIO_CmdInitTypeDef) according
+ to the selected command to be sent.
+ The parameters that should be filled are:
+ (++) Command Argument
+ (++) Command Index
+ (++) Command Response type
+ (++) Command Wait
+ (++) CPSM Status (Enable or Disable).
+
+ -@@- To check if the command is well received, read the SDIO_CMDRESP
+ register using the SDIO_GetCommandResponse().
+ The SDIO responses registers (SDIO_RESP1 to SDIO_RESP2), use the
+ SDIO_GetResponse() function.
+
+ (+) To control the DPSM (Data Path State Machine) and send/receive
+ data to/from the card use the SDIO_DataConfig(), SDIO_GetDataCounter(),
+ SDIO_ReadFIFO(), DIO_WriteFIFO() and SDIO_GetFIFOCount() functions.
+
+ *** Read Operations ***
+ =======================
+ [..]
+ (#) First, user has to fill the data structure (pointer to
+ SDIO_DataInitTypeDef) according to the selected data type to be received.
+ The parameters that should be filled are:
+ (++) Data Timeout
+ (++) Data Length
+ (++) Data Block size
+ (++) Data Transfer direction: should be from card (To SDIO)
+ (++) Data Transfer mode
+ (++) DPSM Status (Enable or Disable)
+
+ (#) Configure the SDIO resources to receive the data from the card
+ according to selected transfer mode (Refer to Step 8, 9 and 10).
+
+ (#) Send the selected Read command (refer to step 11).
+
+ (#) Use the SDIO flags/interrupts to check the transfer status.
+
+ *** Write Operations ***
+ ========================
+ [..]
+ (#) First, user has to fill the data structure (pointer to
+ SDIO_DataInitTypeDef) according to the selected data type to be received.
+ The parameters that should be filled are:
+ (++) Data Timeout
+ (++) Data Length
+ (++) Data Block size
+ (++) Data Transfer direction: should be to card (To CARD)
+ (++) Data Transfer mode
+ (++) DPSM Status (Enable or Disable)
+
+ (#) Configure the SDIO resources to send the data to the card according to
+ selected transfer mode.
+
+ (#) Send the selected Write command.
+
+ (#) Use the SDIO flags/interrupts to check the transfer status.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SDMMC_LL SDMMC Low Layer
+ * @brief Low layer module for SD and MMC driver
+ * @{
+ */
+
+#if defined(HAL_SD_MODULE_ENABLED) || defined(HAL_MMC_MODULE_ENABLED)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SDMMC_LL_Exported_Functions SDMMC_LL Exported Functions
+ * @{
+ */
+
+/** @defgroup HAL_SDMMC_LL_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization/de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SDIO according to the specified
+ * parameters in the SDIO_InitTypeDef and create the associated handle.
+ * @param SDIOx: Pointer to SDIO register base
+ * @param Init: SDIO initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_ALL_INSTANCE(SDIOx));
+ assert_param(IS_SDIO_CLOCK_EDGE(Init.ClockEdge));
+ assert_param(IS_SDIO_CLOCK_BYPASS(Init.ClockBypass));
+ assert_param(IS_SDIO_CLOCK_POWER_SAVE(Init.ClockPowerSave));
+ assert_param(IS_SDIO_BUS_WIDE(Init.BusWide));
+ assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl));
+ assert_param(IS_SDIO_CLKDIV(Init.ClockDiv));
+
+ /* Set SDIO configuration parameters */
+ tmpreg |= (Init.ClockEdge |\
+ Init.ClockBypass |\
+ Init.ClockPowerSave |\
+ Init.BusWide |\
+ Init.HardwareFlowControl |\
+ Init.ClockDiv
+ );
+
+ /* Write to SDIO CLKCR */
+ MODIFY_REG(SDIOx->CLKCR, CLKCR_CLEAR_MASK, tmpreg);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SDMMC_LL_Group2 I/O operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### I/O operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SDIO data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read data (word) from Rx FIFO in blocking mode (polling)
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval HAL status
+ */
+uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx)
+{
+ /* Read data from Rx FIFO */
+ return (SDIOx->FIFO);
+}
+
+/**
+ * @brief Write data (word) to Tx FIFO in blocking mode (polling)
+ * @param SDIOx: Pointer to SDIO register base
+ * @param pWriteData: pointer to data to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData)
+{
+ /* Write data to FIFO */
+ SDIOx->FIFO = *pWriteData;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SDIO data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Set SDIO Power state to ON.
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx)
+{
+ /* Set power state to ON */
+ SDIOx->POWER = SDIO_POWER_PWRCTRL;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set SDIO Power state to OFF.
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx)
+{
+ /* Set power state to OFF */
+ SDIOx->POWER = (uint32_t)0x00000000U;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get SDIO Power state.
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval Power status of the controller. The returned value can be one of the
+ * following values:
+ * - 0x00: Power OFF
+ * - 0x02: Power UP
+ * - 0x03: Power ON
+ */
+uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx)
+{
+ return (SDIOx->POWER & SDIO_POWER_PWRCTRL);
+}
+
+/**
+ * @brief Configure the SDIO command path according to the specified parameters in
+ * SDIO_CmdInitTypeDef structure and send the command
+ * @param SDIOx: Pointer to SDIO register base
+ * @param SDIO_CmdInitStruct: pointer to a SDIO_CmdInitTypeDef structure that contains
+ * the configuration information for the SDIO command
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->CmdIndex));
+ assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->Response));
+ assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->WaitForInterrupt));
+ assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->CPSM));
+
+ /* Set the SDIO Argument value */
+ SDIOx->ARG = SDIO_CmdInitStruct->Argument;
+
+ /* Set SDIO command parameters */
+ tmpreg |= (uint32_t)(SDIO_CmdInitStruct->CmdIndex |\
+ SDIO_CmdInitStruct->Response |\
+ SDIO_CmdInitStruct->WaitForInterrupt |\
+ SDIO_CmdInitStruct->CPSM);
+
+ /* Write to SDIO CMD register */
+ MODIFY_REG(SDIOx->CMD, CMD_CLEAR_MASK, tmpreg);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Return the command index of last command for which response received
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval Command index of the last command response received
+ */
+uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx)
+{
+ return (uint8_t)(SDIOx->RESPCMD);
+}
+
+
+/**
+ * @brief Return the response received from the card for the last command
+ * @param SDIO_RESP: Specifies the SDIO response register.
+ * This parameter can be one of the following values:
+ * @arg SDIO_RESP1: Response Register 1
+ * @arg SDIO_RESP2: Response Register 2
+ * @arg SDIO_RESP3: Response Register 3
+ * @arg SDIO_RESP4: Response Register 4
+ * @retval The Corresponding response register value
+ */
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP)
+{
+ __IO uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_RESP(SDIO_RESP));
+
+ /* Get the response */
+ tmp = SDIO_RESP_ADDR + SDIO_RESP;
+
+ return (*(__IO uint32_t *) tmp);
+}
+
+/**
+ * @brief Configure the SDIO data path according to the specified
+ * parameters in the SDIO_DataInitTypeDef.
+ * @param SDIOx: Pointer to SDIO register base
+ * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure
+ * that contains the configuration information for the SDIO command.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->DataLength));
+ assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->DataBlockSize));
+ assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->TransferDir));
+ assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->TransferMode));
+ assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->DPSM));
+
+ /* Set the SDIO Data Timeout value */
+ SDIOx->DTIMER = SDIO_DataInitStruct->DataTimeOut;
+
+ /* Set the SDIO DataLength value */
+ SDIOx->DLEN = SDIO_DataInitStruct->DataLength;
+
+ /* Set the SDIO data configuration parameters */
+ tmpreg |= (uint32_t)(SDIO_DataInitStruct->DataBlockSize |\
+ SDIO_DataInitStruct->TransferDir |\
+ SDIO_DataInitStruct->TransferMode |\
+ SDIO_DataInitStruct->DPSM);
+
+ /* Write to SDIO DCTRL */
+ MODIFY_REG(SDIOx->DCTRL, DCTRL_CLEAR_MASK, tmpreg);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Returns number of remaining data bytes to be transferred.
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval Number of remaining data bytes to be transferred
+ */
+uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx)
+{
+ return (SDIOx->DCOUNT);
+}
+
+/**
+ * @brief Get the FIFO data
+ * @param SDIOx: Pointer to SDIO register base
+ * @retval Data received
+ */
+uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx)
+{
+ return (SDIOx->FIFO);
+}
+
+
+/**
+ * @brief Sets one of the two options of inserting read wait interval.
+ * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
+ * This parameter can be:
+ * @arg SDIO_READ_WAIT_MODE_CLK: Read Wait control by stopping SDIOCLK
+ * @arg SDIO_READ_WAIT_MODE_DATA2: Read Wait control using SDIO_DATA2
+ * @retval None
+ */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode));
+
+ *(__IO uint32_t *)DCTRL_RWMOD_BB = SDIO_ReadWaitMode;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#endif /* (HAL_SD_MODULE_ENABLED) || (HAL_MMC_MODULE_ENABLED) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_sdmmc.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,919 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_sdmmc.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of SDMMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_SDMMC_H
+#define __STM32F4xx_LL_SDMMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_Driver
+ * @{
+ */
+
+/** @addtogroup SDMMC_LL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types
+ * @{
+ */
+
+/**
+ * @brief SDMMC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SDIO_Clock_Edge */
+
+ uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+ uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
+ disabled when the bus is idle.
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+ uint32_t BusWide; /*!< Specifies the SDIO bus width.
+ This parameter can be a value of @ref SDIO_Bus_Wide */
+
+ uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+ uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+}SDIO_InitTypeDef;
+
+
+/**
+ * @brief SDIO Command Control structure
+ */
+typedef struct
+{
+ uint32_t Argument; /*!< Specifies the SDIO command argument which is sent
+ to a card as part of a command message. If a command
+ contains an argument, it must be loaded into this register
+ before writing the command to the command register. */
+
+ uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and
+ Max_Data = 64 */
+
+ uint32_t Response; /*!< Specifies the SDIO response type.
+ This parameter can be a value of @ref SDIO_Response_Type */
+
+ uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+ uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_CPSM_State */
+}SDIO_CmdInitTypeDef;
+
+
+/**
+ * @brief SDIO Data Control structure
+ */
+typedef struct
+{
+ uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
+
+ uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */
+
+ uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer.
+ This parameter can be a value of @ref SDIO_Data_Block_Size */
+
+ uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer
+ is a read or write.
+ This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+ uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
+ This parameter can be a value of @ref SDIO_Transfer_Type */
+
+ uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_DPSM_State */
+}SDIO_DataInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants
+ * @{
+ */
+
+/** @defgroup SDIO_Clock_Edge Clock Edge
+ * @{
+ */
+#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000U)
+#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE
+
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \
+ ((EDGE) == SDIO_CLOCK_EDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Bypass Clock Bypass
+ * @{
+ */
+#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS
+
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \
+ ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Power_Save Clock Power Saving
+ * @{
+ */
+#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV
+
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \
+ ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Bus_Wide Bus Width
+ * @{
+ */
+#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000U)
+#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0
+#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1
+
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \
+ ((WIDE) == SDIO_BUS_WIDE_4B) || \
+ ((WIDE) == SDIO_BUS_WIDE_8B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control
+ * @{
+ */
+#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN
+
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \
+ ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Division Clock Division
+ * @{
+ */
+#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFFU)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Command_Index Command Index
+ * @{
+ */
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40U)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Type Response Type
+ * @{
+ */
+#define SDIO_RESPONSE_NO ((uint32_t)0x00000000U)
+#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0
+#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP
+
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \
+ ((RESPONSE) == SDIO_RESPONSE_SHORT) || \
+ ((RESPONSE) == SDIO_RESPONSE_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt
+ * @{
+ */
+#define SDIO_WAIT_NO ((uint32_t)0x00000000U)
+#define SDIO_WAIT_IT SDIO_CMD_WAITINT
+#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND
+
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \
+ ((WAIT) == SDIO_WAIT_IT) || \
+ ((WAIT) == SDIO_WAIT_PEND))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_CPSM_State CPSM State
+ * @{
+ */
+#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN
+
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \
+ ((CPSM) == SDIO_CPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Registers Response Register
+ * @{
+ */
+#define SDIO_RESP1 ((uint32_t)0x00000000U)
+#define SDIO_RESP2 ((uint32_t)0x00000004U)
+#define SDIO_RESP3 ((uint32_t)0x00000008U)
+#define SDIO_RESP4 ((uint32_t)0x0000000CU)
+
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \
+ ((RESP) == SDIO_RESP2) || \
+ ((RESP) == SDIO_RESP3) || \
+ ((RESP) == SDIO_RESP4))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Length Data Lenght
+ * @{
+ */
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Block_Size Data Block Size
+ * @{
+ */
+#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000U)
+#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0
+#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1
+#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030U)
+#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2
+#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050U)
+#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060U)
+#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070U)
+#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3
+#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090U)
+#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0U)
+#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0U)
+#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0U)
+#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0U)
+#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0U)
+
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16384B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Direction Transfer Direction
+ * @{
+ */
+#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000U)
+#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR
+
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \
+ ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Type Transfer Type
+ * @{
+ */
+#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000U)
+#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE
+
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \
+ ((MODE) == SDIO_TRANSFER_MODE_STREAM))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_DPSM_State DPSM State
+ * @{
+ */
+#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN
+
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\
+ ((DPSM) == SDIO_DPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode
+ * @{
+ */
+#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000U)
+#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000001U)
+
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
+ ((MODE) == SDIO_READ_WAIT_MODE_DATA2))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Interrupt_sources Interrupt Sources
+ * @{
+ */
+#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_IT_CMDREND SDIO_STA_CMDREND
+#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_IT_DATAEND SDIO_STA_DATAEND
+#define SDIO_IT_STBITERR SDIO_STA_STBITERR
+#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_IT_CMDACT SDIO_STA_CMDACT
+#define SDIO_IT_TXACT SDIO_STA_TXACT
+#define SDIO_IT_RXACT SDIO_STA_RXACT
+#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Flags Flags
+ * @{
+ */
+#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND
+#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND
+#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR
+#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT
+#define SDIO_FLAG_TXACT SDIO_STA_TXACT
+#define SDIO_FLAG_RXACT SDIO_STA_RXACT
+#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros
+ * @{
+ */
+
+/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region
+ * @{
+ */
+/* ------------ SDIO registers bit address in the alias region -------------- */
+#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET (SDIO_OFFSET + 0x04U)
+#define CLKEN_BITNUMBER 0x08U
+#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32U) + (CLKEN_BITNUMBER * 4U))
+
+/* --- CMD Register ---*/
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET (SDIO_OFFSET + 0x0CU)
+#define SDIOSUSPEND_BITNUMBER 0x0BU
+#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (SDIOSUSPEND_BITNUMBER * 4U))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BITNUMBER 0x0CU
+#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ENCMDCOMPL_BITNUMBER * 4U))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BITNUMBER 0x0DU
+#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (NIEN_BITNUMBER * 4U))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BITNUMBER 0x0EU
+#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ATACMD_BITNUMBER * 4U))
+
+/* --- DCTRL Register ---*/
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET (SDIO_OFFSET + 0x2CU)
+#define DMAEN_BITNUMBER 0x03U
+#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (DMAEN_BITNUMBER * 4U))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BITNUMBER 0x08U
+#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTART_BITNUMBER * 4U))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BITNUMBER 0x09U
+#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTOP_BITNUMBER * 4U))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BITNUMBER 0x0AU
+#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWMOD_BITNUMBER * 4U))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BITNUMBER 0x0BU
+#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (SDIOEN_BITNUMBER * 4U))
+/**
+ * @}
+ */
+
+/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions
+ * @brief SDMMC_LL registers bit address in the alias region
+ * @{
+ */
+
+/* ---------------------- SDIO registers bit mask --------------------------- */
+/* --- CLKCR Register ---*/
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\
+ SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\
+ SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN))
+
+/* --- PWRCTRL Register ---*/
+/* --- DCTRL Register ---*/
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\
+ SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE))
+
+/* --- CMD Register ---*/
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\
+ SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\
+ SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND))
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14U))
+
+/* SDIO Initialization Frequency (400KHz max) */
+#define SDIO_INIT_CLK_DIV ((uint8_t)0x76U)
+
+/* SDIO Data Transfer Frequency (25MHz max) */
+#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SDIO device.
+ * @retval None
+ */
+#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO device.
+ * @retval None
+ */
+#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified SDIO flag is set or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SDIO_FLAG (SET or RESET).
+ */
+#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET)
+
+
+/**
+ * @brief Clears the SDIO pending flags.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified SDIO interrupt has occurred or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SDIO_IT (SET or RESET).
+ */
+#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clears the SDIO's interrupt pending bits.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__))
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE)
+
+/**
+ * @brief Disable Start the SD I/O Read Wait operations.
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE)
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE)
+
+/**
+ * @brief Disable Stop the SD I/O Read Wait operations.
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Mode Operation.
+ * @retval None
+ */
+#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Mode Operation.
+ * @retval None
+ */
+#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Suspend command sending.
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Suspend command sending.
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE)
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) ||\
+ defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
+/**
+ * @brief Enable the command completion signal.
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE)
+
+/**
+ * @brief Disable the command completion signal.
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE)
+
+/**
+ * @brief Enable the CE-ATA interrupt.
+ * @retval None
+ */
+#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0U)
+
+/**
+ * @brief Disable the CE-ATA interrupt.
+ * @retval None
+ */
+#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1U)
+
+/**
+ * @brief Enable send CE-ATA command (CMD61).
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE)
+
+/**
+ * @brief Disable send CE-ATA command (CMD61).
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\
+ STM32F412Cx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDMMC_LL_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+/** @addtogroup HAL_SDMMC_LL_Group1
+ * @{
+ */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init);
+/**
+ * @}
+ */
+
+/* I/O operation functions *****************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group3
+ * @{
+ */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx);
+
+/* Command path state machine (CPSM) management functions */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+
+/* Data path state machine (DPSM) management functions */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx);
+
+/* SDIO IO Cards mode management functions */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
+ STM32F412Rx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_SDMMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1710 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_usb.c
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief USB Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization/de-initialization functions
+ * + I/O operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
+
+ (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
+
+ (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_LL_USB_DRIVER
+ * @{
+ */
+
+#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx);
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup LL_USB_Exported_Functions USB Low Layer Exported Functions
+ * @{
+ */
+
+/** @defgroup LL_USB_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization/de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the USB Core
+ * @param USBx: USB Instance
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ if (cfg.phy_itface == USB_OTG_ULPI_PHY)
+ {
+
+ USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
+
+ /* Init The ULPI Interface */
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL);
+
+ /* Select vbus source */
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
+ if(cfg.use_external_vbus == 1U)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD;
+ }
+ /* Reset after a PHY select */
+ USB_CoreReset(USBx);
+ }
+ else /* FS interface (embedded Phy) */
+ {
+ /* Select FS Embedded PHY */
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
+
+ /* Reset after a PHY select and set Host mode */
+ USB_CoreReset(USBx);
+
+ /* Deactivate the power down*/
+ USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
+ }
+
+ if(cfg.dma_enable == ENABLE)
+ {
+ USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EnableGlobalInt
+ * Enables the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT;
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_DisableGlobalInt
+ * Disable the controller's Global Int in the AHB Config reg
+ * @param USBx : Selected device
+ * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT;
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetCurrentMode : Set functional mode
+ * @param USBx : Selected device
+ * @param mode : current core mode
+ * This parameter can be one of these values:
+ * @arg USB_OTG_DEVICE_MODE: Peripheral mode
+ * @arg USB_OTG_HOST_MODE: Host mode
+ * @arg USB_OTG_DRD_MODE: Dual Role Device mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode)
+{
+ USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD);
+
+ if ( mode == USB_OTG_HOST_MODE)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD;
+ }
+ else if ( mode == USB_OTG_DEVICE_MODE)
+ {
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
+ }
+ HAL_Delay(50U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevInit : Initializes the USB_OTG controller registers
+ * for device mode
+ * @param USBx : Selected device
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ uint32_t i = 0U;
+
+ /*Activate VBUS Sensing B */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+ USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+
+ if (cfg.vbus_sensing_enable == 0U)
+ {
+ /* Deactivate VBUS Sensing B */
+ USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
+
+ /* B-peripheral session valid override enable*/
+ USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
+ USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
+ }
+#else
+ USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
+
+ if (cfg.vbus_sensing_enable == 0U)
+ {
+ USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+ }
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+ /* Restart the Phy Clock */
+ USBx_PCGCCTL = 0U;
+
+ /* Device mode configuration */
+ USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80;
+
+ if(cfg.phy_itface == USB_OTG_ULPI_PHY)
+ {
+ if(cfg.speed == USB_OTG_SPEED_HIGH)
+ {
+ /* Set High speed phy */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH);
+ }
+ else
+ {
+ /* set High speed phy in Full speed mode */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH_IN_FULL);
+ }
+ }
+ else
+ {
+ /* Set Full speed phy */
+ USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL);
+ }
+
+ /* Flush the FIFOs */
+ USB_FlushTxFifo(USBx , 0x10U); /* all Tx FIFOs */
+ USB_FlushRxFifo(USBx);
+
+ /* Clear all pending Device Interrupts */
+ USBx_DEVICE->DIEPMSK = 0U;
+ USBx_DEVICE->DOEPMSK = 0U;
+ USBx_DEVICE->DAINT = 0xFFFFFFFFU;
+ USBx_DEVICE->DAINTMSK = 0U;
+
+ for (i = 0U; i < cfg.dev_endpoints; i++)
+ {
+ if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
+ {
+ USBx_INEP(i)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK);
+ }
+ else
+ {
+ USBx_INEP(i)->DIEPCTL = 0U;
+ }
+
+ USBx_INEP(i)->DIEPTSIZ = 0U;
+ USBx_INEP(i)->DIEPINT = 0xFFU;
+ }
+
+ for (i = 0U; i < cfg.dev_endpoints; i++)
+ {
+ if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
+ {
+ USBx_OUTEP(i)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK);
+ }
+ else
+ {
+ USBx_OUTEP(i)->DOEPCTL = 0U;
+ }
+
+ USBx_OUTEP(i)->DOEPTSIZ = 0U;
+ USBx_OUTEP(i)->DOEPINT = 0xFFU;
+ }
+
+ USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM);
+
+ if (cfg.dma_enable == 1U)
+ {
+ /*Set threshold parameters */
+ USBx_DEVICE->DTHRCTL = (USB_OTG_DTHRCTL_TXTHRLEN_6 | USB_OTG_DTHRCTL_RXTHRLEN_6);
+ USBx_DEVICE->DTHRCTL |= (USB_OTG_DTHRCTL_RXTHREN | USB_OTG_DTHRCTL_ISOTHREN | USB_OTG_DTHRCTL_NONISOTHREN);
+
+ i= USBx_DEVICE->DTHRCTL;
+ }
+
+ /* Disable all interrupts. */
+ USBx->GINTMSK = 0U;
+
+ /* Clear any pending interrupts */
+ USBx->GINTSTS = 0xBFFFFFFFU;
+
+ /* Enable the common interrupts */
+ if (cfg.dma_enable == DISABLE)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+ }
+
+ /* Enable interrupts matching to the Device mode ONLY */
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\
+ USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\
+ USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM|\
+ USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+
+ if(cfg.Sof_enable)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM;
+ }
+
+ if (cfg.vbus_sensing_enable == ENABLE)
+ {
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT);
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO
+ * @param USBx : Selected device
+ * @param num : FIFO number
+ * This parameter can be a value from 1 to 15
+ 15 means Flush all Tx FIFOs
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num )
+{
+ uint32_t count = 0U;
+
+ USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 6));
+
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_FlushRxFifo : Flush Rx FIFO
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t count = 0U;
+
+ USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
+
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetDevSpeed :Initializes the DevSpd field of DCFG register
+ * depending the PHY type and the enumeration speed of the device.
+ * @param USBx : Selected device
+ * @param speed : device speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ * @retval Hal status
+ */
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed)
+{
+ USBx_DEVICE->DCFG |= speed;
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_GetDevSpeed :Return the Dev Speed
+ * @param USBx : Selected device
+ * @retval speed : device speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ */
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint8_t speed = 0U;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ)
+ {
+ speed = USB_OTG_SPEED_HIGH;
+ }
+ else if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)||
+ ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ))
+ {
+ speed = USB_OTG_SPEED_FULL;
+ }
+ else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+ {
+ speed = USB_OTG_SPEED_LOW;
+ }
+
+ return speed;
+}
+
+/**
+ * @brief Activate and configure an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1U)
+ {
+ USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num)));
+
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+ }
+ }
+ else
+ {
+ USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U);
+
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
+ }
+ }
+ return HAL_OK;
+}
+/**
+ * @brief Activate and configure a dedicated endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ static __IO uint32_t debug = 0U;
+
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1U)
+ {
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+ }
+
+
+ debug |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+
+ USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num)));
+ }
+ else
+ {
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DOEPCTL_USBAEP));
+
+ debug = (uint32_t)(((uint32_t )USBx) + USB_OTG_OUT_ENDPOINT_BASE + (0U)*USB_OTG_EP_REG_SIZE);
+ debug = (uint32_t )&USBx_OUTEP(ep->num)->DOEPCTL;
+ debug |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+ ((ep->num) << 22U) | (USB_OTG_DOEPCTL_USBAEP));
+ }
+
+ USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U);
+ }
+
+ return HAL_OK;
+}
+/**
+ * @brief De-activate and de-initialize an endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1U)
+ {
+ USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num))));
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num))));
+ USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+ }
+ else
+ {
+ USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U));
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U));
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief De-activate and de-initialize a dedicated endpoint
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1U << (ep->num))));
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
+ USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1U << (ep->num)) << 16U));
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EPStartXfer : setup and starts a transfer over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+ uint16_t pktcnt = 0U;
+
+ /* IN endpoint */
+ if (ep->is_in == 1U)
+ {
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ }
+ else
+ {
+ /* Program the transfer size and packet count
+ * as follows: xfersize = N * maxpacket +
+ * short_packet pktcnt = N + (short_packet
+ * exist ? 1 : 0)
+ */
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1U)/ ep->maxpacket) << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29U));
+ }
+ }
+
+ if (dma == 1U)
+ {
+ USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+ }
+ else
+ {
+ if (ep->type != EP_TYPE_ISOC)
+ {
+ /* Enable the Tx FIFO Empty Interrupt for this EP */
+ if (ep->xfer_len > 0U)
+ {
+ USBx_DEVICE->DIEPEMPMSK |= 1U << ep->num;
+ }
+ }
+ }
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ if ((USBx_DEVICE->DSTS & ( 1U << 8U )) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM;
+ }
+ else
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
+ }
+ }
+
+ /* EP enable, IN data in FIFO */
+ USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len, dma);
+ }
+ }
+ else /* OUT endpoint */
+ {
+ /* Program the transfer size and packet count as follows:
+ * pktcnt = N
+ * xfersize = N * maxpacket
+ */
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+ if (ep->xfer_len == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19U));
+ }
+ else
+ {
+ pktcnt = (ep->xfer_len + ep->maxpacket -1U)/ ep->maxpacket;
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19U));
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt));
+ }
+
+ if (dma == 1U)
+ {
+ USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)ep->xfer_buff;
+ }
+
+ if (ep->type == EP_TYPE_ISOC)
+ {
+ if ((USBx_DEVICE->DSTS & ( 1U << 8U )) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM;
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
+ }
+ }
+ /* EP enable */
+ USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+ /* IN endpoint */
+ if (ep->is_in == 1U)
+ {
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ }
+ else
+ {
+ /* Program the transfer size and packet count
+ * as follows: xfersize = N * maxpacket +
+ * short_packet pktcnt = N + (short_packet
+ * exist ? 1 : 0)
+ */
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+ USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+
+ if(ep->xfer_len > ep->maxpacket)
+ {
+ ep->xfer_len = ep->maxpacket;
+ }
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+
+ }
+
+ if (dma == 1)
+ {
+ USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+ }
+ else
+ {
+ /* Enable the Tx FIFO Empty Interrupt for this EP */
+ if (ep->xfer_len > 0U)
+ {
+ USBx_DEVICE->DIEPEMPMSK |= 1U << (ep->num);
+ }
+ }
+
+ /* EP enable, IN data in FIFO */
+ USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+ }
+ else /* OUT endpoint */
+ {
+ /* Program the transfer size and packet count as follows:
+ * pktcnt = N
+ * xfersize = N * maxpacket
+ */
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+ USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+ if (ep->xfer_len > 0U)
+ {
+ ep->xfer_len = ep->maxpacket;
+ }
+
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19U));
+ USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket));
+
+
+ if (dma == 1U)
+ {
+ USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)(ep->xfer_buff);
+ }
+
+ /* EP enable */
+ USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param src : pointer to source buffer
+ * @param ch_ep_num : endpoint or host channel number
+ * @param len : Number of bytes to write
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma)
+{
+ uint32_t count32b = 0U , i = 0U;
+
+ if (dma == 0U)
+ {
+ count32b = (len + 3U) / 4U;
+ for (i = 0U; i < count32b; i++, src += 4U)
+ {
+ USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src);
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
+ * with the EP/channel
+ * @param USBx : Selected device
+ * @param src : source pointer
+ * @param ch_ep_num : endpoint or host channel number
+ * @param len : Number of bytes to read
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval pointer to destination buffer
+ */
+void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
+{
+ uint32_t i=0U;
+ uint32_t count32b = (len + 3U) / 4U;
+
+ for ( i = 0U; i < count32b; i++, dest += 4U )
+ {
+ *(__packed uint32_t *)dest = USBx_DFIFO(0U);
+
+ }
+ return ((void *)dest);
+}
+
+/**
+ * @brief USB_EPSetStall : set a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1U)
+ {
+ if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS);
+ }
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL;
+ }
+ else
+ {
+ if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0U)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS);
+ }
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL;
+ }
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_EPClearStall : Clear a stall condition over an EP
+ * @param USBx : Selected device
+ * @param ep: pointer to endpoint structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+ if (ep->is_in == 1U)
+ {
+ USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
+ if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+ {
+ USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+ }
+ }
+ else
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
+ if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+ {
+ USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_StopDevice : Stop the usb device mode
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t i;
+
+ /* Clear Pending interrupt */
+ for (i = 0U; i < 15U ; i++)
+ {
+ USBx_INEP(i)->DIEPINT = 0xFFU;
+ USBx_OUTEP(i)->DOEPINT = 0xFFU;
+ }
+ USBx_DEVICE->DAINT = 0xFFFFFFFFU;
+
+ /* Clear interrupt masks */
+ USBx_DEVICE->DIEPMSK = 0U;
+ USBx_DEVICE->DOEPMSK = 0U;
+ USBx_DEVICE->DAINTMSK = 0U;
+
+ /* Flush the FIFO */
+ USB_FlushRxFifo(USBx);
+ USB_FlushTxFifo(USBx , 0x10U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_SetDevAddress : Stop the usb device mode
+ * @param USBx : Selected device
+ * @param address : new device address to be assigned
+ * This parameter can be a value from 0 to 255
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address)
+{
+ USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD);
+ USBx_DEVICE->DCFG |= (address << 4U) & USB_OTG_DCFG_DAD ;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ;
+ HAL_Delay(3U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx)
+{
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS ;
+ HAL_Delay(3U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_ReadInterrupts: return the global USB interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t v = 0U;
+
+ v = USBx->GINTSTS;
+ v &= USBx->GINTMSK;
+ return v;
+}
+
+/**
+ * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t v;
+ v = USBx_DEVICE->DAINT;
+ v &= USBx_DEVICE->DAINTMSK;
+ return ((v & 0xffff0000U) >> 16U);
+}
+
+/**
+ * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t v;
+ v = USBx_DEVICE->DAINT;
+ v &= USBx_DEVICE->DAINTMSK;
+ return ((v & 0xFFFFU));
+}
+
+/**
+ * @brief Returns Device OUT EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device OUT EP Interrupt register
+ */
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+ uint32_t v;
+ v = USBx_OUTEP(epnum)->DOEPINT;
+ v &= USBx_DEVICE->DOEPMSK;
+ return v;
+}
+
+/**
+ * @brief Returns Device IN EP Interrupt register
+ * @param USBx : Selected device
+ * @param epnum : endpoint number
+ * This parameter can be a value from 0 to 15
+ * @retval Device IN EP Interrupt register
+ */
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+ uint32_t v, msk, emp;
+
+ msk = USBx_DEVICE->DIEPMSK;
+ emp = USBx_DEVICE->DIEPEMPMSK;
+ msk |= ((emp >> epnum) & 0x1U) << 7U;
+ v = USBx_INEP(epnum)->DIEPINT & msk;
+ return v;
+}
+
+/**
+ * @brief USB_ClearInterrupts: clear a USB interrupt
+ * @param USBx : Selected device
+ * @param interrupt : interrupt flag
+ * @retval None
+ */
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt)
+{
+ USBx->GINTSTS |= interrupt;
+}
+
+/**
+ * @brief Returns USB core mode
+ * @param USBx : Selected device
+ * @retval return core mode : Host or Device
+ * This parameter can be one of these values:
+ * 0 : Host
+ * 1 : Device
+ */
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx)
+{
+ return ((USBx->GINTSTS ) & 0x1U);
+}
+
+
+/**
+ * @brief Activate EP0 for Setup transactions
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx)
+{
+ /* Set the MPS of the IN EP based on the enumeration speed */
+ USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ;
+
+ if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+ {
+ USBx_INEP(0U)->DIEPCTL |= 3U;
+ }
+ USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Prepare the EP0 to start the first control setup
+ * @param USBx : Selected device
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @param psetup : pointer to setup packet
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup)
+{
+ USBx_OUTEP(0U)->DOEPTSIZ = 0U;
+ USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19U)) ;
+ USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U);
+ USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT;
+
+ if (dma == 1U)
+ {
+ USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup;
+ /* EP enable */
+ USBx_OUTEP(0U)->DOEPCTL = 0x80008000U;
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Reset the USB Core (needed after USB clock settings change)
+ * @param USBx : Selected device
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint32_t count = 0U;
+
+ /* Wait for AHB master IDLE state. */
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U);
+
+ /* Core Soft Reset */
+ count = 0U;
+ USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
+
+ do
+ {
+ if (++count > 200000U)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief USB_HostInit : Initializes the USB OTG controller registers
+ * for Host mode
+ * @param USBx : Selected device
+ * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+ * the configuration information for the specified USBx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+ uint32_t i;
+
+ /* Restart the Phy Clock */
+ USBx_PCGCCTL = 0U;
+
+ /* Activate VBUS Sensing B */
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+ USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+#else
+ USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN);
+ USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN);
+ USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+#endif /* STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx */
+
+ /* Disable the FS/LS support mode only */
+ if((cfg.speed == USB_OTG_SPEED_FULL)&&
+ (USBx != USB_OTG_FS))
+ {
+ USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS;
+ }
+ else
+ {
+ USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS);
+ }
+
+ /* Make sure the FIFOs are flushed. */
+ USB_FlushTxFifo(USBx, 0x10U); /* all Tx FIFOs */
+ USB_FlushRxFifo(USBx);
+
+ /* Clear all pending HC Interrupts */
+ for (i = 0U; i < cfg.Host_channels; i++)
+ {
+ USBx_HC(i)->HCINT = 0xFFFFFFFFU;
+ USBx_HC(i)->HCINTMSK = 0U;
+ }
+
+ /* Enable VBUS driving */
+ USB_DriveVbus(USBx, 1U);
+
+ HAL_Delay(200U);
+
+ /* Disable all interrupts. */
+ USBx->GINTMSK = 0U;
+
+ /* Clear any pending interrupts */
+ USBx->GINTSTS = 0xFFFFFFFFU;
+
+ if(USBx == USB_OTG_FS)
+ {
+ /* set Rx FIFO size */
+ USBx->GRXFSIZ = (uint32_t )0x80U;
+ USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60U << 16U)& USB_OTG_NPTXFD) | 0x80U);
+ USBx->HPTXFSIZ = (uint32_t )(((0x40U << 16U)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U);
+ }
+ else
+ {
+ /* set Rx FIFO size */
+ USBx->GRXFSIZ = (uint32_t )0x200U;
+ USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x100U << 16U)& USB_OTG_NPTXFD) | 0x200U);
+ USBx->HPTXFSIZ = (uint32_t )(((0xE0U << 16U)& USB_OTG_HPTXFSIZ_PTXFD) | 0x300U);
+ }
+
+ /* Enable the common interrupts */
+ if (cfg.dma_enable == DISABLE)
+ {
+ USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+ }
+
+ /* Enable interrupts matching to the Host mode ONLY */
+ USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM |\
+ USB_OTG_GINTMSK_SOFM |USB_OTG_GINTSTS_DISCINT|\
+ USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the
+ * HCFG register on the PHY type and set the right frame interval
+ * @param USBx : Selected device
+ * @param freq : clock frequency
+ * This parameter can be one of these values:
+ * HCFG_48_MHZ : Full Speed 48 MHz Clock
+ * HCFG_6_MHZ : Low Speed 6 MHz Clock
+ * @retval HAL status
+ */
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq)
+{
+ USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS);
+ USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS);
+
+ if (freq == HCFG_48_MHZ)
+ {
+ USBx_HOST->HFIR = (uint32_t)48000U;
+ }
+ else if (freq == HCFG_6_MHZ)
+ {
+ USBx_HOST->HFIR = (uint32_t)6000U;
+ }
+ return HAL_OK;
+}
+
+/**
+* @brief USB_OTG_ResetPort : Reset Host Port
+ * @param USBx : Selected device
+ * @retval HAL status
+ * @note (1)The application must wait at least 10 ms
+ * before clearing the reset bit.
+ */
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx)
+{
+ __IO uint32_t hprt0;
+
+ hprt0 = USBx_HPRT0;
+
+ hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0);
+ HAL_Delay (10U); /* See Note #1 */
+ USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0);
+ return HAL_OK;
+}
+
+/**
+ * @brief USB_DriveVbus : activate or de-activate vbus
+ * @param state : VBUS state
+ * This parameter can be one of these values:
+ * 0 : VBUS Active
+ * 1 : VBUS Inactive
+ * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state)
+{
+ __IO uint32_t hprt0;
+
+ hprt0 = USBx_HPRT0;
+ hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U))
+ {
+ USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0);
+ }
+ if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U))
+ {
+ USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Return Host Core speed
+ * @param USBx : Selected device
+ * @retval speed : Host speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ */
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx)
+{
+ __IO uint32_t hprt0;
+
+ hprt0 = USBx_HPRT0;
+ return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17U);
+}
+
+/**
+ * @brief Return Host Current Frame number
+ * @param USBx : Selected device
+ * @retval current frame number
+*/
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx)
+{
+ return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM);
+}
+
+/**
+ * @brief Initialize a host channel
+ * @param USBx : Selected device
+ * @param ch_num : Channel number
+ * This parameter can be a value from 1 to 15
+ * @param epnum : Endpoint number
+ * This parameter can be a value from 1 to 15
+ * @param dev_address : Current device address
+ * This parameter can be a value from 0 to 255
+ * @param speed : Current device speed
+ * This parameter can be one of these values:
+ * @arg USB_OTG_SPEED_HIGH: High speed mode
+ * @arg USB_OTG_SPEED_FULL: Full speed mode
+ * @arg USB_OTG_SPEED_LOW: Low speed mode
+ * @param ep_type : Endpoint Type
+ * This parameter can be one of these values:
+ * @arg EP_TYPE_CTRL: Control type
+ * @arg EP_TYPE_ISOC: Isochronous type
+ * @arg EP_TYPE_BULK: Bulk type
+ * @arg EP_TYPE_INTR: Interrupt type
+ * @param mps : Max Packet Size
+ * This parameter can be a value from 0 to32K
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps)
+{
+
+ /* Clear old interrupt conditions for this host channel. */
+ USBx_HC(ch_num)->HCINT = 0xFFFFFFFFU;
+
+ /* Enable channel interrupts required for this transfer. */
+ switch (ep_type)
+ {
+ case EP_TYPE_CTRL:
+ case EP_TYPE_BULK:
+
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_STALLM |\
+ USB_OTG_HCINTMSK_TXERRM |\
+ USB_OTG_HCINTMSK_DTERRM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_NAKM ;
+
+ if (epnum & 0x80U)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+ }
+ else
+ {
+ if(USBx != USB_OTG_FS)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+ }
+ }
+ break;
+
+ case EP_TYPE_INTR:
+
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_STALLM |\
+ USB_OTG_HCINTMSK_TXERRM |\
+ USB_OTG_HCINTMSK_DTERRM |\
+ USB_OTG_HCINTMSK_NAKM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_FRMORM ;
+
+ if (epnum & 0x80U)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+ }
+
+ break;
+ case EP_TYPE_ISOC:
+
+ USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
+ USB_OTG_HCINTMSK_ACKM |\
+ USB_OTG_HCINTMSK_AHBERR |\
+ USB_OTG_HCINTMSK_FRMORM ;
+
+ if (epnum & 0x80U)
+ {
+ USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM);
+ }
+ break;
+ }
+
+ /* Enable the top level host channel interrupt. */
+ USBx_HOST->HAINTMSK |= (1 << ch_num);
+
+ /* Make sure host channel interrupts are enabled. */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM;
+
+ /* Program the HCCHAR register */
+ USBx_HC(ch_num)->HCCHAR = (((dev_address << 22U) & USB_OTG_HCCHAR_DAD) |\
+ (((epnum & 0x7FU)<< 11U) & USB_OTG_HCCHAR_EPNUM)|\
+ ((((epnum & 0x80U) == 0x80U)<< 15U) & USB_OTG_HCCHAR_EPDIR)|\
+ (((speed == USB_OTG_SPEED_LOW)<< 17U) & USB_OTG_HCCHAR_LSDEV)|\
+ ((ep_type << 18U) & USB_OTG_HCCHAR_EPTYP)|\
+ (mps & USB_OTG_HCCHAR_MPSIZ));
+
+ if (ep_type == EP_TYPE_INTR)
+ {
+ USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start a transfer over a host channel
+ * @param USBx : Selected device
+ * @param hc : pointer to host channel structure
+ * @param dma: USB dma enabled or disabled
+ * This parameter can be one of these values:
+ * 0 : DMA feature not used
+ * 1 : DMA feature used
+ * @retval HAL state
+ */
+#if defined (__CC_ARM) /*!< ARM Compiler */
+#pragma O0
+#elif defined (__GNUC__) /*!< GNU Compiler */
+#pragma GCC optimize ("O0")
+#endif /* __CC_ARM */
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma)
+{
+ uint8_t is_oddframe = 0U;
+ uint16_t len_words = 0U;
+ uint16_t num_packets = 0U;
+ uint16_t max_hc_pkt_count = 256U;
+ uint32_t tmpreg = 0U;
+
+ if((USBx != USB_OTG_FS) && (hc->speed == USB_OTG_SPEED_HIGH))
+ {
+ if((dma == 0U) && (hc->do_ping == 1U))
+ {
+ USB_DoPing(USBx, hc->ch_num);
+ return HAL_OK;
+ }
+ else if(dma == 1U)
+ {
+ USBx_HC(hc->ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+ hc->do_ping = 0U;
+ }
+ }
+
+ /* Compute the expected number of packets associated to the transfer */
+ if (hc->xfer_len > 0U)
+ {
+ num_packets = (hc->xfer_len + hc->max_packet - 1U) / hc->max_packet;
+
+ if (num_packets > max_hc_pkt_count)
+ {
+ num_packets = max_hc_pkt_count;
+ hc->xfer_len = num_packets * hc->max_packet;
+ }
+ }
+ else
+ {
+ num_packets = 1U;
+ }
+ if (hc->ep_is_in)
+ {
+ hc->xfer_len = num_packets * hc->max_packet;
+ }
+
+ /* Initialize the HCTSIZn register */
+ USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\
+ ((num_packets << 19U) & USB_OTG_HCTSIZ_PKTCNT) |\
+ (((hc->data_pid) << 29U) & USB_OTG_HCTSIZ_DPID);
+
+ if (dma)
+ {
+ /* xfer_buff MUST be 32-bits aligned */
+ USBx_HC(hc->ch_num)->HCDMA = (uint32_t)hc->xfer_buff;
+ }
+
+ is_oddframe = (USBx_HOST->HFNUM & 0x01U) ? 0U : 1U;
+ USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM;
+ USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29U);
+
+ /* Set host channel enable */
+ tmpreg = USBx_HC(hc->ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc->ch_num)->HCCHAR = tmpreg;
+
+ if (dma == 0U) /* Slave mode */
+ {
+ if((hc->ep_is_in == 0U) && (hc->xfer_len > 0U))
+ {
+ switch(hc->ep_type)
+ {
+ /* Non periodic transfer */
+ case EP_TYPE_CTRL:
+ case EP_TYPE_BULK:
+
+ len_words = (hc->xfer_len + 3U) / 4U;
+
+ /* check if there is enough space in FIFO space */
+ if(len_words > (USBx->HNPTXSTS & 0xFFFFU))
+ {
+ /* need to process data in nptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
+ }
+ break;
+ /* Periodic transfer */
+ case EP_TYPE_INTR:
+ case EP_TYPE_ISOC:
+ len_words = (hc->xfer_len + 3U) / 4U;
+ /* check if there is enough space in FIFO space */
+ if(len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */
+ {
+ /* need to process data in ptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Write packet into the Tx FIFO. */
+ USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len, 0);
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read all host channel interrupts status
+ * @param USBx : Selected device
+ * @retval HAL state
+ */
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+ return ((USBx_HOST->HAINT) & 0xFFFFU);
+}
+
+/**
+ * @brief Halt a host channel
+ * @param USBx : Selected device
+ * @param hc_num : Host Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num)
+{
+ uint32_t count = 0U;
+
+ /* Check for space in the request queue to issue the halt. */
+ if (((((USBx_HC(hc_num)->HCCHAR) & USB_OTG_HCCHAR_EPTYP) >> 18) == HCCHAR_CTRL) || (((((USBx_HC(hc_num)->HCCHAR) &
+ USB_OTG_HCCHAR_EPTYP) >> 18) == HCCHAR_BULK)))
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+ if ((USBx->HNPTXSTS & 0xFF0000U) == 0U)
+ {
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ do
+ {
+ if (++count > 1000U)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+ if ((USBx_HOST->HPTXSTS & 0xFFFFU) == 0U)
+ {
+ USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ do
+ {
+ if (++count > 1000U)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initiate Do Ping protocol
+ * @param USBx : Selected device
+ * @param hc_num : Host Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num)
+{
+ uint8_t num_packets = 1U;
+ uint32_t tmpreg = 0U;
+
+ USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19U) & USB_OTG_HCTSIZ_PKTCNT) |\
+ USB_OTG_HCTSIZ_DOPING;
+
+ /* Set host channel enable */
+ tmpreg = USBx_HC(ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(ch_num)->HCCHAR = tmpreg;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop Host Core
+ * @param USBx : Selected device
+ * @retval HAL state
+ */
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
+{
+ uint8_t i;
+ uint32_t count = 0U;
+ uint32_t value;
+
+ USB_DisableGlobalInt(USBx);
+
+ /* Flush FIFO */
+ USB_FlushTxFifo(USBx, 0x10U);
+ USB_FlushRxFifo(USBx);
+
+ /* Flush out any leftover queued requests. */
+ for (i = 0U; i <= 15U; i++)
+ {
+
+ value = USBx_HC(i)->HCCHAR ;
+ value |= USB_OTG_HCCHAR_CHDIS;
+ value &= ~USB_OTG_HCCHAR_CHENA;
+ value &= ~USB_OTG_HCCHAR_EPDIR;
+ USBx_HC(i)->HCCHAR = value;
+ }
+
+ /* Halt all channels to put them into a known state. */
+ for (i = 0U; i <= 15U; i++)
+ {
+ value = USBx_HC(i)->HCCHAR ;
+
+ value |= USB_OTG_HCCHAR_CHDIS;
+ value |= USB_OTG_HCCHAR_CHENA;
+ value &= ~USB_OTG_HCCHAR_EPDIR;
+
+ USBx_HC(i)->HCCHAR = value;
+ do
+ {
+ if (++count > 1000U)
+ {
+ break;
+ }
+ }
+ while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+
+ /* Clear any pending Host interrupts */
+ USBx_HOST->HAINT = 0xFFFFFFFFU;
+ USBx->GINTSTS = 0xFFFFFFFFU;
+ USB_EnableGlobalInt(USBx);
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#endif /* defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/cmsis/TARGET_STM/TARGET_STM32F4/stm32f4xx_ll_usb.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,477 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_usb.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 06-May-2016
+ * @brief Header file of USB Core HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_USB_H
+#define __STM32F4xx_LL_USB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+ defined(STM32F412Rx) || defined(STM32F412Cx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup USB_Core
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief USB Mode definition
+ */
+typedef enum
+{
+ USB_OTG_DEVICE_MODE = 0U,
+ USB_OTG_HOST_MODE = 1U,
+ USB_OTG_DRD_MODE = 2U
+
+}USB_OTG_ModeTypeDef;
+
+/**
+ * @brief URB States definition
+ */
+typedef enum {
+ URB_IDLE = 0U,
+ URB_DONE,
+ URB_NOTREADY,
+ URB_NYET,
+ URB_ERROR,
+ URB_STALL
+
+}USB_OTG_URBStateTypeDef;
+
+/**
+ * @brief Host channel States definition
+ */
+typedef enum {
+ HC_IDLE = 0U,
+ HC_XFRC,
+ HC_HALTED,
+ HC_NAK,
+ HC_NYET,
+ HC_STALL,
+ HC_XACTERR,
+ HC_BBLERR,
+ HC_DATATGLERR
+
+}USB_OTG_HCStateTypeDef;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t Host_channels; /*!< Host Channels number.
+ This parameter Depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref USB_EP0_MPS_ */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref USB_Core_PHY_ */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
+ uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
+
+ uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
+
+ uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
+
+ uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
+
+ uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
+
+}USB_OTG_CfgTypeDef;
+
+/**
+ * @brief OTG End Point Initialization Structure definition
+ */
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint8_t data_pid_start; /*!< Initial data PID
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t even_odd_frame; /*!< IFrame parity
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint16_t tx_fifo_num; /*!< Transmission FIFO number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}USB_OTG_EPTypeDef;
+
+/**
+ * @brief OTG HC Initialization Structure definition
+ */
+typedef struct
+{
+ uint8_t dev_addr ; /*!< USB device address.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
+
+ uint8_t ch_num; /*!< Host channel number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_num; /*!< Endpoint number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t speed; /*!< USB Host speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
+
+ uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
+
+ uint8_t ep_type; /*!< Endpoint Type.
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint16_t max_packet; /*!< Endpoint Max packet size.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t data_pid; /*!< Initial data PID.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
+
+ uint32_t xfer_len; /*!< Current transfer length. */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
+
+ uint8_t toggle_in; /*!< IN transfer current toggle flag.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t toggle_out; /*!< OUT transfer current toggle flag
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
+
+ uint32_t ErrCnt; /*!< Host channel error count.*/
+
+ USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
+ This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
+ USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
+ This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
+
+}USB_OTG_HCTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup USB_Core_Mode_ USB Core Mode
+ * @{
+ */
+#define USB_OTG_MODE_DEVICE 0U
+#define USB_OTG_MODE_HOST 1U
+#define USB_OTG_MODE_DRD 2U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Speed_ USB Core Speed
+ * @{
+ */
+#define USB_OTG_SPEED_HIGH 0U
+#define USB_OTG_SPEED_HIGH_IN_FULL 1U
+#define USB_OTG_SPEED_LOW 2U
+#define USB_OTG_SPEED_FULL 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_PHY_ USB Core PHY
+ * @{
+ */
+#define USB_OTG_ULPI_PHY 1U
+#define USB_OTG_EMBEDDED_PHY 2U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_MPS_ USB Core MPS
+ * @{
+ */
+#define USB_OTG_HS_MAX_PACKET_SIZE 512U
+#define USB_OTG_FS_MAX_PACKET_SIZE 64U
+#define USB_OTG_MAX_EP0_SIZE 64U
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Phy_Frequency_ USB Core Phy Frequency
+ * @{
+ */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1U)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1U)
+#define DSTS_ENUMSPD_LS_PHY_6MHZ (2U << 1U)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1U)
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Frame_Interval_ USB CORE Frame Interval
+ * @{
+ */
+#define DCFG_FRAME_INTERVAL_80 0U
+#define DCFG_FRAME_INTERVAL_85 1U
+#define DCFG_FRAME_INTERVAL_90 2U
+#define DCFG_FRAME_INTERVAL_95 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP0_MPS_ USB EP0 MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0U
+#define DEP0CTL_MPS_32 1U
+#define DEP0CTL_MPS_16 2U
+#define DEP0CTL_MPS_8 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Speed_ USB EP Speed
+ * @{
+ */
+#define EP_SPEED_LOW 0U
+#define EP_SPEED_FULL 1U
+#define EP_SPEED_HIGH 2U
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Type_ USB EP Type
+ * @{
+ */
+#define EP_TYPE_CTRL 0U
+#define EP_TYPE_ISOC 1U
+#define EP_TYPE_BULK 2U
+#define EP_TYPE_INTR 3U
+#define EP_TYPE_MSK 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_STS_Defines_ USB STS Defines
+ * @{
+ */
+#define STS_GOUT_NAK 1U
+#define STS_DATA_UPDT 2U
+#define STS_XFER_COMP 3U
+#define STS_SETUP_COMP 4U
+#define STS_SETUP_UPDT 6U
+/**
+ * @}
+ */
+
+/** @defgroup HCFG_SPEED_Defines_ HCFG SPEED Defines
+ * @{
+ */
+#define HCFG_30_60_MHZ 0U
+#define HCFG_48_MHZ 1U
+#define HCFG_6_MHZ 2U
+/**
+ * @}
+ */
+
+/** @defgroup HPRT0_PRTSPD_SPEED_Defines_ HPRT0 PRTSPD SPEED Defines
+ * @{
+ */
+#define HPRT0_PRTSPD_HIGH_SPEED 0U
+#define HPRT0_PRTSPD_FULL_SPEED 1U
+#define HPRT0_PRTSPD_LOW_SPEED 2U
+/**
+ * @}
+ */
+
+#define HCCHAR_CTRL 0U
+#define HCCHAR_ISOC 1U
+#define HCCHAR_BULK 2U
+#define HCCHAR_INTR 3U
+
+#define HC_PID_DATA0 0U
+#define HC_PID_DATA2 1U
+#define HC_PID_DATA1 2U
+#define HC_PID_SETUP 3U
+
+#define GRXSTS_PKTSTS_IN 2
+#define GRXSTS_PKTSTS_IN_XFER_COMP 3
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5
+#define GRXSTS_PKTSTS_CH_HALTED 7
+
+#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
+#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
+
+#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
+#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
+void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+ STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+ STM32F412Vx || STM32F412Cx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/PeripheralPins.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,72 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; +extern const PinMap PinMap_UART_RTS[]; +extern const PinMap PinMap_UART_CTS[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +//*** CAN *** +extern const PinMap PinMap_CAN_RD[]; +extern const PinMap PinMap_CAN_TD[]; + +#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,215 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
+ {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
+ {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_IN17
+ {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_IN18
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
+// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
+ {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
+ {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
+ {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
+ {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
+ {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
+ {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RTS[] = {
+ {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ // {PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // MEMs
+ // {PC_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
+ // {PD_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART3)}, // LED D4
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_CTS[] = {
+ {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ // {PB_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ // {PC_9, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
+ // {PD_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART3)}, // LED D4
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,191 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
+#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 16) | ((CHANNEL & 0x1F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F)
+#define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // ADC internal channels
+ ADC_TEMP = 0xF0,
+ ADC_VREF = 0xF1,
+ ADC_VBAT = 0xF2,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ LED_RED = LED1,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,89 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+ uint8_t channel;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+#include "common_objects.h"
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,211 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "mbed_assert.h"
+#include "analogin_api.h"
+
+#if DEVICE_ANALOGIN
+
+#include "wait_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "PeripheralPins.h"
+
+ADC_HandleTypeDef AdcHandle;
+
+void analogin_init(analogin_t *obj, PinName pin)
+{
+#if defined(ADC1)
+ static int adc1_inited = 0;
+#endif
+#if defined(ADC2)
+ static int adc2_inited = 0;
+#endif
+#if defined(ADC3)
+ static int adc3_inited = 0;
+#endif
+ // Get the peripheral name from the pin and assign it to the object
+ obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
+ MBED_ASSERT(obj->adc != (ADCName)NC);
+
+ // Get the functions (adc channel) from the pin and assign it to the object
+ uint32_t function = pinmap_function(pin, PinMap_ADC);
+ MBED_ASSERT(function != (uint32_t)NC);
+ obj->channel = STM_PIN_CHANNEL(function);
+
+ // Configure GPIO excepted for internal channels (Temperature, Vref, Vbat)
+ if ((obj->channel != 16) && (obj->channel != 17) && (obj->channel != 18)) {
+ pinmap_pinout(pin, PinMap_ADC);
+ }
+
+ // Save pin number for the read function
+ obj->pin = pin;
+
+ // Check if ADC is already initialized
+ // Enable ADC clock
+#if defined(ADC1)
+ if ((obj->adc == ADC_1) && adc1_inited) return;
+ if (obj->adc == ADC_1) {
+ __ADC1_CLK_ENABLE();
+ adc1_inited = 1;
+ }
+#endif
+#if defined(ADC2)
+ if ((obj->adc == ADC_2) && adc2_inited) return;
+ if (obj->adc == ADC_2) {
+ __ADC2_CLK_ENABLE();
+ adc2_inited = 1;
+ }
+#endif
+#if defined(ADC3)
+ if ((obj->adc == ADC_3) && adc3_inited) return;
+ if (obj->adc == ADC_3) {
+ __ADC3_CLK_ENABLE();
+ adc3_inited = 1;
+ }
+#endif
+ // Configure ADC
+ AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+ AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
+ AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
+ AdcHandle.Init.ScanConvMode = DISABLE;
+ AdcHandle.Init.ContinuousConvMode = DISABLE;
+ AdcHandle.Init.DiscontinuousConvMode = DISABLE;
+ AdcHandle.Init.NbrOfDiscConversion = 0;
+ AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
+ AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ AdcHandle.Init.NbrOfConversion = 1;
+ AdcHandle.Init.DMAContinuousRequests = DISABLE;
+ AdcHandle.Init.EOCSelection = DISABLE;
+
+ if (HAL_ADC_Init(&AdcHandle) != HAL_OK) {
+ error("Cannot initialize ADC\n");
+ }
+}
+
+static inline uint16_t adc_read(analogin_t *obj)
+{
+ ADC_ChannelConfTypeDef sConfig = {0};
+
+ AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+
+ // Configure ADC channel
+ sConfig.Rank = 1;
+ sConfig.SamplingTime = ADC_SAMPLETIME_15CYCLES;
+ sConfig.Offset = 0;
+
+ switch (obj->channel) {
+ case 0:
+ sConfig.Channel = ADC_CHANNEL_0;
+ break;
+ case 1:
+ sConfig.Channel = ADC_CHANNEL_1;
+ break;
+ case 2:
+ sConfig.Channel = ADC_CHANNEL_2;
+ break;
+ case 3:
+ sConfig.Channel = ADC_CHANNEL_3;
+ break;
+ case 4:
+ sConfig.Channel = ADC_CHANNEL_4;
+ break;
+ case 5:
+ sConfig.Channel = ADC_CHANNEL_5;
+ break;
+ case 6:
+ sConfig.Channel = ADC_CHANNEL_6;
+ break;
+ case 7:
+ sConfig.Channel = ADC_CHANNEL_7;
+ break;
+ case 8:
+ sConfig.Channel = ADC_CHANNEL_8;
+ break;
+ case 9:
+ sConfig.Channel = ADC_CHANNEL_9;
+ break;
+ case 10:
+ sConfig.Channel = ADC_CHANNEL_10;
+ break;
+ case 11:
+ sConfig.Channel = ADC_CHANNEL_11;
+ break;
+ case 12:
+ sConfig.Channel = ADC_CHANNEL_12;
+ break;
+ case 13:
+ sConfig.Channel = ADC_CHANNEL_13;
+ break;
+ case 14:
+ sConfig.Channel = ADC_CHANNEL_14;
+ break;
+ case 15:
+ sConfig.Channel = ADC_CHANNEL_15;
+ break;
+ case 16:
+ sConfig.Channel = ADC_CHANNEL_16;
+ break;
+ case 17:
+ sConfig.Channel = ADC_CHANNEL_17;
+ break;
+ case 18:
+ sConfig.Channel = ADC_CHANNEL_18;
+ break;
+ default:
+ return 0;
+ }
+
+ HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
+
+ HAL_ADC_Start(&AdcHandle); // Start conversion
+
+ // Wait end of conversion and get value
+ if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
+ return (HAL_ADC_GetValue(&AdcHandle));
+ } else {
+ return 0;
+ }
+}
+
+uint16_t analogin_read_u16(analogin_t *obj)
+{
+ uint16_t value = adc_read(obj);
+ // 12-bit to 16-bit conversion
+ value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
+ return value;
+}
+
+float analogin_read(analogin_t *obj)
+{
+ uint16_t value = adc_read(obj);
+ return (float)value * (1.0f / (float)0xFFF); // 12 bits range
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,147 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "analogout_api.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "stm32f4xx_hal.h"
+#include "PeripheralPins.h"
+
+#define DAC_RANGE (0xFFF) // 12 bits
+#define DAC_NB_BITS (12)
+
+DAC_HandleTypeDef DacHandle;
+static DAC_ChannelConfTypeDef sConfig;
+
+void analogout_init(dac_t *obj, PinName pin) {
+ uint32_t channel ;
+ HAL_StatusTypeDef status;
+
+ // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
+ obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
+ // Get the functions (dac channel) from the pin and assign it to the object
+ uint32_t function = pinmap_function(pin, PinMap_DAC);
+ MBED_ASSERT(function != (uint32_t)NC);
+ // Save the channel for the write and read functions
+ obj->channel = STM_PIN_CHANNEL(function);
+
+ if (obj->dac == (DACName)NC) {
+ error("DAC pin mapping failed");
+ }
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_DAC);
+
+ __GPIOA_CLK_ENABLE();
+
+ __DAC_CLK_ENABLE();
+
+ DacHandle.Instance = DAC;
+
+ status = HAL_DAC_Init(&DacHandle);
+ if ( status != HAL_OK ) {
+ error("HAL_DAC_Init failed");
+ }
+
+ sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
+ sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+
+ if (obj->channel == 1) {
+ channel = DAC_CHANNEL_1;
+ } else {
+ channel = DAC_CHANNEL_2;
+ }
+
+ if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
+ error("HAL_DAC_ConfigChannel failed");
+ }
+
+ if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
+ error("HAL_DAC_Start failed");
+ }
+
+ if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
+ error("HAL_DAC_SetValue failed");
+ }
+
+}
+
+void analogout_free(dac_t *obj) {
+}
+
+static inline void dac_write(dac_t *obj, int value) {
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ if (obj->channel == 1) {
+ status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, (value & DAC_RANGE));
+ } else if (obj->channel == 2) {
+ status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, (value & DAC_RANGE));
+ }
+
+ if ( status != HAL_OK ) {
+ error("DAC pin mapping failed");
+ }
+}
+
+static inline int dac_read(dac_t *obj) {
+ if (obj->channel == 1) {
+ return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
+ } else if (obj->channel == 2) {
+ return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
+ }
+ return 0; /* Just silented warning */
+}
+
+void analogout_write(dac_t *obj, float value) {
+ if (value < 0.0f) {
+ dac_write(obj, 0); // Min value
+ } else if (value > 1.0f) {
+ dac_write(obj, (int)DAC_RANGE); // Max value
+ } else {
+ dac_write(obj, (int)(value * (float)DAC_RANGE));
+ }
+}
+
+void analogout_write_u16(dac_t *obj, uint16_t value) {
+ dac_write(obj, value >> (16 - DAC_NB_BITS));
+}
+
+float analogout_read(dac_t *obj) {
+ uint32_t value = dac_read(obj);
+ return (float)value * (1.0f / (float)DAC_RANGE);
+}
+
+uint16_t analogout_read_u16(dac_t *obj) {
+ uint32_t value = dac_read(obj);
+ return (value << 4) | ((value >> 8) & 0x000F); // Conversion from 12 to 16 bits
+}
+
+#endif // DEVICE_ANALOGOUT
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/can_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/can_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,536 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "can_api.h"
+
+#if DEVICE_CAN
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+#include <math.h>
+#include <string.h>
+
+#define CAN_NUM 2
+static CAN_HandleTypeDef CanHandle;
+static uint32_t can_irq_ids[CAN_NUM] = {0};
+static can_irq_handler irq_handler;
+
+void can_init(can_t *obj, PinName rd, PinName td)
+{
+ uint32_t filter_number;
+ CANName can_rd = (CANName)pinmap_peripheral(rd, PinMap_CAN_RD);
+ CANName can_td = (CANName)pinmap_peripheral(td, PinMap_CAN_TD);
+ obj->can = (CANName)pinmap_merge(can_rd, can_td);
+ MBED_ASSERT((int)obj->can != NC);
+
+ if(obj->can == CAN_1) {
+ __HAL_RCC_CAN1_CLK_ENABLE();
+ obj->index = 0;
+ } else {
+ __HAL_RCC_CAN2_CLK_ENABLE();
+ obj->index = 1;
+ }
+
+ // Configure the CAN pins
+ pinmap_pinout(rd, PinMap_CAN_RD);
+ pinmap_pinout(td, PinMap_CAN_TD);
+ if (rd != NC) {
+ pin_mode(rd, PullUp);
+ }
+ if (td != NC) {
+ pin_mode(td, PullUp);
+ }
+
+ CanHandle.Instance = (CAN_TypeDef *)(obj->can);
+
+ CanHandle.Init.TTCM = DISABLE;
+ CanHandle.Init.ABOM = DISABLE;
+ CanHandle.Init.AWUM = DISABLE;
+ CanHandle.Init.NART = DISABLE;
+ CanHandle.Init.RFLM = DISABLE;
+ CanHandle.Init.TXFP = DISABLE;
+ CanHandle.Init.Mode = CAN_MODE_NORMAL;
+ CanHandle.Init.SJW = CAN_SJW_1TQ;
+ CanHandle.Init.BS1 = CAN_BS1_6TQ;
+ CanHandle.Init.BS2 = CAN_BS2_8TQ;
+ CanHandle.Init.Prescaler = 2;
+
+ if (HAL_CAN_Init(&CanHandle) != HAL_OK) {
+ error("Cannot initialize CAN");
+ }
+
+ filter_number = (obj->can == CAN_1) ? 0 : 14;
+
+ // Set initial CAN frequency to 100kb/s
+ can_frequency(obj, 100000);
+
+ can_filter(obj, 0, 0, CANStandard, filter_number);
+}
+
+void can_irq_init(can_t *obj, can_irq_handler handler, uint32_t id)
+{
+ irq_handler = handler;
+ can_irq_ids[obj->index] = id;
+}
+
+void can_irq_free(can_t *obj)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ can->IER &= ~(CAN_IT_FMP0 | CAN_IT_FMP1 | CAN_IT_TME | \
+ CAN_IT_ERR | CAN_IT_EPV | CAN_IT_BOF);
+ can_irq_ids[obj->can] = 0;
+}
+
+void can_free(can_t *obj)
+{
+ // Reset CAN and disable clock
+ if (obj->can == CAN_1) {
+ __HAL_RCC_CAN1_FORCE_RESET();
+ __HAL_RCC_CAN1_RELEASE_RESET();
+ __HAL_RCC_CAN1_CLK_DISABLE();
+ }
+
+ if (obj->can == CAN_2) {
+ __HAL_RCC_CAN2_FORCE_RESET();
+ __HAL_RCC_CAN2_RELEASE_RESET();
+ __HAL_RCC_CAN2_CLK_DISABLE();
+ }
+}
+
+// The following table is used to program bit_timing. It is an adjustment of the sample
+// point by synchronizing on the start-bit edge and resynchronizing on the following edges.
+// This table has the sampling points as close to 75% as possible (most commonly used).
+// The first value is TSEG1, the second TSEG2.
+static const int timing_pts[23][2] = {
+ {0x0, 0x0}, // 2, 50%
+ {0x1, 0x0}, // 3, 67%
+ {0x2, 0x0}, // 4, 75%
+ {0x3, 0x0}, // 5, 80%
+ {0x3, 0x1}, // 6, 67%
+ {0x4, 0x1}, // 7, 71%
+ {0x5, 0x1}, // 8, 75%
+ {0x6, 0x1}, // 9, 78%
+ {0x6, 0x2}, // 10, 70%
+ {0x7, 0x2}, // 11, 73%
+ {0x8, 0x2}, // 12, 75%
+ {0x9, 0x2}, // 13, 77%
+ {0x9, 0x3}, // 14, 71%
+ {0xA, 0x3}, // 15, 73%
+ {0xB, 0x3}, // 16, 75%
+ {0xC, 0x3}, // 17, 76%
+ {0xD, 0x3}, // 18, 78%
+ {0xD, 0x4}, // 19, 74%
+ {0xE, 0x4}, // 20, 75%
+ {0xF, 0x4}, // 21, 76%
+ {0xF, 0x5}, // 22, 73%
+ {0xF, 0x6}, // 23, 70%
+ {0xF, 0x7}, // 24, 67%
+};
+
+static unsigned int can_speed(unsigned int pclk, unsigned int cclk, unsigned char psjw)
+{
+ uint32_t btr;
+ uint16_t brp = 0;
+ uint32_t calcbit;
+ uint32_t bitwidth;
+ int hit = 0;
+ int bits;
+
+ bitwidth = (pclk / cclk);
+
+ brp = bitwidth / 0x18;
+ while ((!hit) && (brp < bitwidth / 4)) {
+ brp++;
+ for (bits = 22; bits > 0; bits--) {
+ calcbit = (bits + 3) * (brp + 1);
+ if (calcbit == bitwidth) {
+ hit = 1;
+ break;
+ }
+ }
+ }
+
+ if (hit) {
+ btr = ((timing_pts[bits][1] << 20) & 0x00700000)
+ | ((timing_pts[bits][0] << 16) & 0x000F0000)
+ | ((psjw << 24) & 0x0000C000)
+ | ((brp << 0) & 0x000003FF);
+ } else {
+ btr = 0xFFFFFFFF;
+ }
+
+ return btr;
+
+}
+
+int can_frequency(can_t *obj, int f)
+{
+ int pclk = HAL_RCC_GetPCLK1Freq();
+ int btr = can_speed(pclk, (unsigned int)f, 1);
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ if (btr > 0) {
+ can->MCR |= CAN_MCR_INRQ ;
+ while((can->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) {
+ }
+ can->BTR = btr;
+ can->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+ while((can->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) {
+ }
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+int can_write(can_t *obj, CAN_Message msg, int cc)
+{
+ uint32_t transmitmailbox = 5;
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ /* Select one empty transmit mailbox */
+ if ((can->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) {
+ transmitmailbox = 0;
+ } else if ((can->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) {
+ transmitmailbox = 1;
+ } else if ((can->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) {
+ transmitmailbox = 2;
+ } else {
+ transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+ }
+
+ if (transmitmailbox != CAN_TXSTATUS_NOMAILBOX) {
+ can->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+ if (!(msg.format))
+ {
+ can->sTxMailBox[transmitmailbox].TIR |= ((msg.id << 21) | msg.type);
+ }
+ else
+ {
+ can->sTxMailBox[transmitmailbox].TIR |= ((msg.id << 3) | CAN_ID_EXT | msg.type);
+ }
+
+ /* Set up the DLC */
+ can->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+ can->sTxMailBox[transmitmailbox].TDTR |= (msg.len & (uint8_t)0x0000000F);
+
+ /* Set up the data field */
+ can->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)msg.data[3] << 24) |
+ ((uint32_t)msg.data[2] << 16) |
+ ((uint32_t)msg.data[1] << 8) |
+ ((uint32_t)msg.data[0]));
+ can->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)msg.data[7] << 24) |
+ ((uint32_t)msg.data[6] << 16) |
+ ((uint32_t)msg.data[5] << 8) |
+ ((uint32_t)msg.data[4]));
+ /* Request transmission */
+ can->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+ }
+
+ return 1;
+}
+
+int can_read(can_t *obj, CAN_Message *msg, int handle)
+{
+ //handle is the FIFO number
+
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ /* Get the Id */
+ msg->format = (CANFormat)((uint8_t)0x04 & can->sFIFOMailBox[handle].RIR);
+ if (!msg->format) {
+ msg->id = (uint32_t)0x000007FF & (can->sFIFOMailBox[handle].RIR >> 21);
+ } else {
+ msg->id = (uint32_t)0x1FFFFFFF & (can->sFIFOMailBox[handle].RIR >> 3);
+ }
+
+ msg->type = (CANType)((uint8_t)0x02 & can->sFIFOMailBox[handle].RIR);
+ /* Get the DLC */
+ msg->len = (uint8_t)0x0F & can->sFIFOMailBox[handle].RDTR;
+// /* Get the FMI */
+// msg->FMI = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDTR >> 8);
+ /* Get the data field */
+ msg->data[0] = (uint8_t)0xFF & can->sFIFOMailBox[handle].RDLR;
+ msg->data[1] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDLR >> 8);
+ msg->data[2] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDLR >> 16);
+ msg->data[3] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDLR >> 24);
+ msg->data[4] = (uint8_t)0xFF & can->sFIFOMailBox[handle].RDHR;
+ msg->data[5] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDHR >> 8);
+ msg->data[6] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDHR >> 16);
+ msg->data[7] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDHR >> 24);
+
+ /* Release the FIFO */
+ if(handle == CAN_FIFO0) {
+ /* Release FIFO0 */
+ can->RF0R = CAN_RF0R_RFOM0;
+ } else { /* FIFONumber == CAN_FIFO1 */
+ /* Release FIFO1 */
+ can->RF1R = CAN_RF1R_RFOM1;
+ }
+
+ return 1;
+}
+
+void can_reset(can_t *obj)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ can->MCR |= CAN_MCR_RESET;
+ can->ESR = 0x0;
+}
+
+unsigned char can_rderror(can_t *obj)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+ return (can->ESR >> 24) & 0xFF;
+}
+
+unsigned char can_tderror(can_t *obj)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+ return (can->ESR >> 16) & 0xFF;
+}
+
+void can_monitor(can_t *obj, int silent)
+{
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+
+ can->MCR |= CAN_MCR_INRQ ;
+ while((can->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) {
+ }
+ if (silent) {
+ can->BTR |= ((uint32_t)1 << 31);
+ } else {
+ can->BTR &= ~((uint32_t)1 << 31);
+ }
+ can->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+ while((can->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) {
+ }
+}
+
+int can_mode(can_t *obj, CanMode mode)
+{
+ int success = 0;
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+ can->MCR |= CAN_MCR_INRQ ;
+ while((can->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) {
+ }
+ switch (mode) {
+ case MODE_NORMAL:
+ can->BTR &= ~(CAN_BTR_SILM | CAN_BTR_LBKM);
+ success = 1;
+ break;
+ case MODE_SILENT:
+ can->BTR |= CAN_BTR_SILM;
+ can->BTR &= ~CAN_BTR_LBKM;
+ success = 1;
+ break;
+ case MODE_TEST_GLOBAL:
+ case MODE_TEST_LOCAL:
+ can->BTR |= CAN_BTR_LBKM;
+ can->BTR &= ~CAN_BTR_SILM;
+ success = 1;
+ break;
+ case MODE_TEST_SILENT:
+ can->BTR |= (CAN_BTR_SILM | CAN_BTR_LBKM);
+ success = 1;
+ break;
+ default:
+ success = 0;
+ break;
+ }
+ can->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+ while((can->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) {
+ }
+ return success;
+}
+
+int can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle)
+{
+ CanHandle.Instance = (CAN_TypeDef *)(obj->can);
+ CAN_FilterConfTypeDef sFilterConfig;
+
+ sFilterConfig.FilterNumber = handle;
+ sFilterConfig.FilterMode = CAN_FILTERMODE_IDMASK;
+ sFilterConfig.FilterScale = CAN_FILTERSCALE_32BIT;
+ sFilterConfig.FilterIdHigh = (uint8_t) (id >> 8);
+ sFilterConfig.FilterIdLow = (uint8_t) id;
+ sFilterConfig.FilterMaskIdHigh = (uint8_t) (mask >> 8);
+ sFilterConfig.FilterMaskIdLow = (uint8_t) mask;
+ sFilterConfig.FilterFIFOAssignment = 0;
+ sFilterConfig.FilterActivation = ENABLE;
+ sFilterConfig.BankNumber = 14 + handle;
+
+ HAL_CAN_ConfigFilter(&CanHandle, &sFilterConfig);
+
+ return 0;
+}
+
+static void can_irq(CANName name, int id)
+{
+ uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
+ CanHandle.Instance = (CAN_TypeDef *)name;
+
+ if(__HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_TME)) {
+ tmp1 = __HAL_CAN_TRANSMIT_STATUS(&CanHandle, CAN_TXMAILBOX_0);
+ tmp2 = __HAL_CAN_TRANSMIT_STATUS(&CanHandle, CAN_TXMAILBOX_1);
+ tmp3 = __HAL_CAN_TRANSMIT_STATUS(&CanHandle, CAN_TXMAILBOX_2);
+ if(tmp1 || tmp2 || tmp3)
+ {
+ irq_handler(can_irq_ids[id], IRQ_TX);
+ }
+ }
+
+ tmp1 = __HAL_CAN_MSG_PENDING(&CanHandle, CAN_FIFO0);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_FMP0);
+
+ if((tmp1 != 0) && tmp2) {
+ irq_handler(can_irq_ids[id], IRQ_RX);
+ }
+
+ tmp1 = __HAL_CAN_GET_FLAG(&CanHandle, CAN_FLAG_EPV);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_EPV);
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_ERR);
+
+ if(tmp1 && tmp2 && tmp3) {
+ irq_handler(can_irq_ids[id], IRQ_PASSIVE);
+ }
+
+ tmp1 = __HAL_CAN_GET_FLAG(&CanHandle, CAN_FLAG_BOF);
+ tmp2 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_BOF);
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_ERR);
+ if(tmp1 && tmp2 && tmp3) {
+ irq_handler(can_irq_ids[id], IRQ_BUS);
+ }
+
+ tmp3 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_ERR);
+ if(tmp1 && tmp2 && tmp3) {
+ irq_handler(can_irq_ids[id], IRQ_ERROR);
+ }
+}
+
+void CAN1_RX0_IRQHandler(void)
+{
+ can_irq(CAN_1, 0);
+}
+
+void CAN1_TX_IRQHandler(void)
+{
+ can_irq(CAN_1, 0);
+}
+
+void CAN1_SCE_IRQHandler(void)
+{
+ can_irq(CAN_1, 0);
+}
+
+void CAN2_RX0_IRQHandler(void)
+{
+ can_irq(CAN_2, 1);
+}
+
+void CAN2_TX_IRQHandler(void)
+{
+ can_irq(CAN_2, 1);
+}
+
+void CAN2_SCE_IRQHandler(void)
+{
+ can_irq(CAN_2, 1);
+}
+
+void can_irq_set(can_t *obj, CanIrqType type, uint32_t enable)
+{
+
+ CAN_TypeDef *can = (CAN_TypeDef *)(obj->can);
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+ uint32_t ier;
+
+ if(obj->can == CAN_1) {
+ switch (type) {
+ case IRQ_RX:
+ ier = CAN_IT_FMP0;
+ irq_n = CAN1_RX0_IRQn;
+ vector = (uint32_t)&CAN1_RX0_IRQHandler;
+ break;
+ case IRQ_TX:
+ ier = CAN_IT_TME;
+ irq_n = CAN1_TX_IRQn;
+ vector = (uint32_t)&CAN1_TX_IRQHandler;
+ break;
+ case IRQ_ERROR:
+ ier = CAN_IT_ERR;
+ irq_n = CAN1_SCE_IRQn;
+ vector = (uint32_t)&CAN1_SCE_IRQHandler;
+ break;
+ case IRQ_PASSIVE:
+ ier = CAN_IT_EPV;
+ irq_n = CAN1_SCE_IRQn;
+ vector = (uint32_t)&CAN1_SCE_IRQHandler;
+ break;
+ case IRQ_BUS:
+ ier = CAN_IT_BOF;
+ irq_n = CAN1_SCE_IRQn;
+ vector = (uint32_t)&CAN1_SCE_IRQHandler;
+ break;
+ default: return;
+ }
+ } else {
+ switch (type) {
+ case IRQ_RX:
+ ier = CAN_IT_FMP0;
+ irq_n = CAN2_RX0_IRQn;
+ vector = (uint32_t)&CAN2_RX0_IRQHandler;
+ break;
+ case IRQ_TX:
+ ier = CAN_IT_TME;
+ irq_n = CAN2_TX_IRQn;
+ vector = (uint32_t)&CAN2_TX_IRQHandler;
+ break;
+ case IRQ_ERROR:
+ ier = CAN_IT_ERR;
+ irq_n = CAN2_SCE_IRQn;
+ vector = (uint32_t)&CAN2_SCE_IRQHandler;
+ break;
+ case IRQ_PASSIVE:
+ ier = CAN_IT_EPV;
+ irq_n = CAN2_SCE_IRQn;
+ vector = (uint32_t)&CAN2_SCE_IRQHandler;
+ break;
+ case IRQ_BUS:
+ ier = CAN_IT_BOF;
+ irq_n = CAN2_SCE_IRQn;
+ vector = (uint32_t)&CAN2_SCE_IRQHandler;
+ break;
+ default: return;
+ }
+ }
+
+ if(enable) {
+ can->IER |= ier;
+ } else {
+ can->IER &= ~ier;
+ }
+
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+}
+
+#endif // DEVICE_CAN
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/common_objects.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/common_objects.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,78 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_COMMON_OBJECTS_H
+#define MBED_COMMON_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t prescaler;
+ uint32_t period;
+ uint32_t pulse;
+ uint8_t channel;
+ uint8_t inverted;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index;
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+#if DEVICE_SERIAL_ASYNCH
+ uint32_t events;
+#endif
+#if DEVICE_SERIAL_FC
+ uint32_t hw_flow_ctl;
+ PinName pin_rts;
+ PinName pin_cts;
+#endif
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/device.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/device.h Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,40 @@ +// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches. +// Check the 'features' section of the target description in 'targets.json' for more details. +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +//======================================= +#define DEVICE_ID_LENGTH 24 + +#include "objects.h" + +#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/entropy_hardware_poll.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/entropy_hardware_poll.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,85 @@
+/*
+ * Hardware entropy collector for the STM32F4 family
+ *
+ * Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+
+#if defined(TARGET_STM32F405xx) || defined(TARGET_STM32F415xx) || defined(TARGET_STM32F407xx) || defined(TARGET_STM32F417xx) ||\
+ defined(TARGET_STM32F427xx) || defined(TARGET_STM32F437xx) || defined(TARGET_STM32F429xx) || defined(TARGET_STM32F439xx) ||\
+ defined(TARGET_STM32F410Tx) || defined(TARGET_STM32F410Cx) || defined(TARGET_STM32F410Rx) || defined(TARGET_STM32F469xx) ||\
+ defined(TARGET_STM32F479xx)
+#include <stdlib.h>
+#include "cmsis.h"
+
+/* RNG handler declaration */
+RNG_HandleTypeDef RngHandle;
+
+
+/** rng_get_byte
+ * @brief Get one byte of entropy from the RNG, assuming it is up and running.
+ * @param pointer to the hardware generated random byte.
+ */
+static void rng_get_byte( unsigned char *byte )
+{
+ *byte = (unsigned char)HAL_RNG_GetRandomNumber(&RngHandle);
+}
+
+
+/** mbedtls_hardware_poll
+ * @brief Get len bytes of entropy from the hardware RNG.
+ * @param data pointer will be NULL
+ * @param output pointer to the random generated bytes buffer
+ * @param len input is the requested length of bytes to be generated
+ * @param olen is the pointer to the length of bytes effectively generated
+ * @returns 0 if the generation went well. -1 in case of error
+ */
+int mbedtls_hardware_poll( void *data, unsigned char *output, size_t len, size_t *olen )
+{
+ int ret;
+ ((void) data);
+
+ /* RNG Peripheral clock enable */
+ __HAL_RCC_RNG_CLK_ENABLE();
+
+ /* Initialize RNG instance */
+ RngHandle.Instance = RNG;
+ HAL_RNG_Init(&RngHandle);
+
+ /* Get Random byte */
+ for( uint32_t i = 0; i < len; i++ ){
+ rng_get_byte( output + i );
+
+ }
+ *olen = len;
+ /* Just be extra sure that we didn't do it wrong */
+ if( ( __HAL_RNG_GET_FLAG(&RngHandle, (RNG_FLAG_CECS|RNG_FLAG_SECS)) ) != 0 ) {
+ ret = -1;
+ } else {
+ ret = 0;
+ }
+ /*Disable the RNG peripheral */
+ HAL_RNG_DeInit(&RngHandle);
+ /* RNG Peripheral clock disable - assume we're the only users of RNG */
+ __HAL_RCC_RNG_CLK_DISABLE();
+
+
+ return( ret );
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F410xx || STM32F469xx || STM32F479xx */
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "gpio_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+uint32_t gpio_set(PinName pin)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+
+ pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
+}
+
+void gpio_init(gpio_t *obj, PinName pin)
+{
+ obj->pin = pin;
+ if (pin == (PinName)NC)
+ return;
+
+ uint32_t port_index = STM_PORT(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Fill GPIO object structure for future use
+ obj->mask = gpio_set(pin);
+ obj->reg_in = &gpio->IDR;
+ obj->reg_set_clr = &gpio->BSRR;
+}
+
+void gpio_mode(gpio_t *obj, PinMode mode)
+{
+ pin_mode(obj->pin, mode);
+}
+
+void gpio_dir(gpio_t *obj, PinDirection direction)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (direction == PIN_OUTPUT) {
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+ } else { // PIN_INPUT
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ }
+}
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,332 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include <stddef.h>
+#include "cmsis.h"
+#include "gpio_irq_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+#define EDGE_NONE (0)
+#define EDGE_RISE (1)
+#define EDGE_FALL (2)
+#define EDGE_BOTH (3)
+
+// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
+#define CHANNEL_NUM (7)
+
+// Max pins for one line (max with EXTI10_15)
+#define MAX_PIN_LINE (6)
+
+typedef struct gpio_channel {
+ uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
+ uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
+ uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
+ uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
+} gpio_channel_t;
+
+static gpio_channel_t channels[CHANNEL_NUM] = {
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0}
+};
+
+// Used to return the index for channels array.
+static uint32_t pin_base_nr[16] = {
+ // EXTI0
+ 0, // pin 0
+ // EXTI1
+ 0, // pin 1
+ // EXTI2
+ 0, // pin 2
+ // EXTI3
+ 0, // pin 3
+ // EXTI4
+ 0, // pin 4
+ // EXTI5_9
+ 0, // pin 5
+ 1, // pin 6
+ 2, // pin 7
+ 3, // pin 8
+ 4, // pin 9
+ // EXTI10_15
+ 0, // pin 10
+ 1, // pin 11
+ 2, // pin 12
+ 3, // pin 13
+ 4, // pin 14
+ 5 // pin 15
+};
+
+static gpio_irq_handler irq_handler;
+
+static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
+{
+ gpio_channel_t *gpio_channel = &channels[irq_index];
+ uint32_t gpio_idx;
+
+ for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
+ uint32_t current_mask = (1 << gpio_idx);
+
+ if (gpio_channel->pin_mask & current_mask) {
+ // Retrieve the gpio and pin that generate the irq
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
+ uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
+
+ // Clear interrupt flag
+ if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
+ __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
+
+ if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
+
+ // Check which edge has generated the irq
+ if ((gpio->IDR & pin) == 0) {
+ irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
+ } else {
+ irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
+ }
+ }
+ }
+ }
+}
+
+// EXTI line 0
+static void gpio_irq0(void)
+{
+ handle_interrupt_in(0, 1);
+}
+
+// EXTI line 1
+static void gpio_irq1(void)
+{
+ handle_interrupt_in(1, 1);
+}
+
+// EXTI line 2
+static void gpio_irq2(void)
+{
+ handle_interrupt_in(2, 1);
+}
+
+// EXTI line 3
+static void gpio_irq3(void)
+{
+ handle_interrupt_in(3, 1);
+}
+
+// EXTI line 4
+static void gpio_irq4(void)
+{
+ handle_interrupt_in(4, 1);
+}
+
+// EXTI lines 5 to 9
+static void gpio_irq5(void)
+{
+ handle_interrupt_in(5, 5);
+}
+
+// EXTI lines 10 to 15
+static void gpio_irq6(void)
+{
+ handle_interrupt_in(6, 6);
+}
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
+{
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+ uint32_t irq_index;
+ gpio_channel_t *gpio_channel;
+ uint32_t gpio_idx;
+
+ if (pin == NC) return -1;
+
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Select irq number and interrupt routine
+ switch (pin_index) {
+ case 0:
+ irq_n = EXTI0_IRQn;
+ vector = (uint32_t)&gpio_irq0;
+ irq_index = 0;
+ break;
+ case 1:
+ irq_n = EXTI1_IRQn;
+ vector = (uint32_t)&gpio_irq1;
+ irq_index = 1;
+ break;
+ case 2:
+ irq_n = EXTI2_IRQn;
+ vector = (uint32_t)&gpio_irq2;
+ irq_index = 2;
+ break;
+ case 3:
+ irq_n = EXTI3_IRQn;
+ vector = (uint32_t)&gpio_irq3;
+ irq_index = 3;
+ break;
+ case 4:
+ irq_n = EXTI4_IRQn;
+ vector = (uint32_t)&gpio_irq4;
+ irq_index = 4;
+ break;
+ case 5:
+ case 6:
+ case 7:
+ case 8:
+ case 9:
+ irq_n = EXTI9_5_IRQn;
+ vector = (uint32_t)&gpio_irq5;
+ irq_index = 5;
+ break;
+ case 10:
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ case 15:
+ irq_n = EXTI15_10_IRQn;
+ vector = (uint32_t)&gpio_irq6;
+ irq_index = 6;
+ break;
+ default:
+ error("InterruptIn error: pin not supported.\n");
+ return -1;
+ }
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+
+ // Configure GPIO
+ pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
+
+ // Enable EXTI interrupt
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+
+ // Save informations for future use
+ obj->irq_n = irq_n;
+ obj->irq_index = irq_index;
+ obj->event = EDGE_NONE;
+ obj->pin = pin;
+
+ gpio_channel = &channels[irq_index];
+ gpio_idx = pin_base_nr[pin_index];
+ gpio_channel->pin_mask |= (1 << gpio_idx);
+ gpio_channel->channel_ids[gpio_idx] = id;
+ gpio_channel->channel_gpio[gpio_idx] = gpio_add;
+ gpio_channel->channel_pin[gpio_idx] = pin_index;
+
+ irq_handler = handler;
+
+ return 0;
+}
+
+void gpio_irq_free(gpio_irq_t *obj)
+{
+ gpio_channel_t *gpio_channel = &channels[obj->irq_index];
+ uint32_t pin_index = STM_PIN(obj->pin);
+ uint32_t gpio_idx = pin_base_nr[pin_index];
+
+ gpio_channel->pin_mask &= ~(1 << gpio_idx);
+ gpio_channel->channel_ids[gpio_idx] = 0;
+ gpio_channel->channel_gpio[gpio_idx] = 0;
+ gpio_channel->channel_pin[gpio_idx] = 0;
+
+ // Disable EXTI line
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ obj->event = EDGE_NONE;
+}
+
+void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
+{
+ uint32_t mode = STM_MODE_IT_EVT_RESET;
+ uint32_t pull = GPIO_NOPULL;
+
+ if (enable) {
+ if (event == IRQ_RISE) {
+ if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING_FALLING;
+ obj->event = EDGE_BOTH;
+ } else { // NONE or RISE
+ mode = STM_MODE_IT_RISING;
+ obj->event = EDGE_RISE;
+ }
+ }
+ if (event == IRQ_FALL) {
+ if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING_FALLING;
+ obj->event = EDGE_BOTH;
+ } else { // NONE or FALL
+ mode = STM_MODE_IT_FALLING;
+ obj->event = EDGE_FALL;
+ }
+ }
+ } else { // Disable
+ if (event == IRQ_RISE) {
+ if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_FALLING;
+ obj->event = EDGE_FALL;
+ } else { // NONE or RISE
+ mode = STM_MODE_IT_EVT_RESET;
+ obj->event = EDGE_NONE;
+ }
+ }
+ if (event == IRQ_FALL) {
+ if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING;
+ obj->event = EDGE_RISE;
+ } else { // NONE or FALL
+ mode = STM_MODE_IT_EVT_RESET;
+ obj->event = EDGE_NONE;
+ }
+ }
+ }
+
+ pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
+}
+
+void gpio_irq_enable(gpio_irq_t *obj)
+{
+ NVIC_EnableIRQ(obj->irq_n);
+}
+
+void gpio_irq_disable(gpio_irq_t *obj)
+{
+ NVIC_DisableIRQ(obj->irq_n);
+ obj->event = EDGE_NONE;
+}
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_object.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_object.h Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,74 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_set_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set_clr = obj->mask;
+ } else {
+ *obj->reg_set_clr = obj->mask << 16;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,529 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "i2c_api.h"
+
+#if DEVICE_I2C
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+
+/* Timeout values for flags and events waiting loops. These timeouts are
+ not based on accurate values, they just guarantee that the application will
+ not remain stuck if the I2C communication is corrupted. */
+#define FLAG_TIMEOUT ((int)0x1000)
+#define LONG_TIMEOUT ((int)0x8000)
+
+I2C_HandleTypeDef I2cHandle;
+
+int i2c1_inited = 0;
+int i2c2_inited = 0;
+int i2c3_inited = 0;
+int fmpi2c1_inited = 0;
+
+void i2c_init(i2c_t *obj, PinName sda, PinName scl)
+{
+ // Determine the I2C to use
+ I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
+ I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
+
+ obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
+ MBED_ASSERT(obj->i2c != (I2CName)NC);
+
+ // Enable I2C1 clock and pinout if not done
+ if ((obj->i2c == I2C_1) && !i2c1_inited) {
+ i2c1_inited = 1;
+ __I2C1_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+ // Enable I2C2 clock and pinout if not done
+ if ((obj->i2c == I2C_2) && !i2c2_inited) {
+ i2c2_inited = 1;
+ __I2C2_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+#if defined I2C3_BASE
+ // Enable I2C3 clock and pinout if not done
+ if ((obj->i2c == I2C_3) && !i2c3_inited) {
+ i2c3_inited = 1;
+ __I2C3_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+#endif
+
+#if defined FMPI2C1_BASE
+ // Enable I2C3 clock and pinout if not done
+ if ((obj->i2c == FMPI2C_1) && !fmpi2c1_inited) {
+ fmpi2c1_inited = 1;
+ __HAL_RCC_FMPI2C1_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+#endif
+
+ // Reset to clear pending flags if any
+ i2c_reset(obj);
+
+ // I2C configuration
+ i2c_frequency(obj, 100000); // 100 kHz per default
+
+ // I2C master by default
+ obj->slave = 0;
+}
+
+void i2c_frequency(i2c_t *obj, int hz)
+{
+ MBED_ASSERT((hz > 0) && (hz <= 400000));
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ // wait before init
+ timeout = LONG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+
+ // I2C configuration
+ I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
+ I2cHandle.Init.ClockSpeed = hz;
+ I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
+ I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
+ I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
+ I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
+ I2cHandle.Init.OwnAddress1 = 0;
+ I2cHandle.Init.OwnAddress2 = 0;
+ HAL_I2C_Init(&I2cHandle);
+ if (obj->slave) {
+ /* Enable Address Acknowledge */
+ I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+}
+
+inline int i2c_start(i2c_t *obj)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ // Clear Acknowledge failure flag
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
+
+ // Wait the STOP condition has been previously correctly sent
+ // This timeout can be avoid in some specific cases by simply clearing the STOP bit
+ timeout = FLAG_TIMEOUT;
+ while ((i2c->CR1 & I2C_CR1_STOP) == I2C_CR1_STOP) {
+ if ((timeout--) == 0) {
+ return 1;
+ }
+ }
+
+ // Generate the START condition
+ i2c->CR1 |= I2C_CR1_START;
+
+ // Wait the START condition has been correctly sent
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
+ if ((timeout--) == 0) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+inline int i2c_stop(i2c_t *obj)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+
+ // Generate the STOP condition
+ i2c->CR1 |= I2C_CR1_STOP;
+
+ return 0;
+}
+
+int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+ int count;
+ int value;
+
+ i2c_start(obj);
+
+ // Wait until SB flag is set
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+
+ i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
+
+
+ // Wait address is acknowledged
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
+
+ // Read all bytes except last one
+ for (count = 0; count < (length - 1); count++) {
+ value = i2c_byte_read(obj, 0);
+ data[count] = (char)value;
+ }
+
+ // If not repeated start, send stop.
+ // Warning: must be done BEFORE the data is read.
+ if (stop) {
+ i2c_stop(obj);
+ }
+
+ // Read the last byte
+ value = i2c_byte_read(obj, 1);
+ data[count] = (char)value;
+
+ return length;
+}
+
+int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+ int count;
+
+ i2c_start(obj);
+
+ // Wait until SB flag is set
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+
+ i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
+
+
+ // Wait address is acknowledged
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
+
+ for (count = 0; count < length; count++) {
+ if (i2c_byte_write(obj, data[count]) != 1) {
+ i2c_stop(obj);
+ return -1;
+ }
+ }
+
+ // If not repeated start, send stop.
+ if (stop) {
+ i2c_stop(obj);
+ }
+
+ return count;
+}
+
+int i2c_byte_read(i2c_t *obj, int last)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ if (last) {
+ // Don't acknowledge the last byte
+ i2c->CR1 &= ~I2C_CR1_ACK;
+ } else {
+ // Acknowledge the byte
+ i2c->CR1 |= I2C_CR1_ACK;
+ }
+
+ // Wait until the byte is received
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
+ if ((timeout--) == 0) {
+ return -1;
+ }
+ }
+
+ return (int)i2c->DR;
+}
+
+int i2c_byte_write(i2c_t *obj, int data)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ i2c->DR = (uint8_t)data;
+
+ // Wait until the byte is transmitted
+ timeout = FLAG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
+ (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
+ if ((timeout--) == 0) {
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+void i2c_reset(i2c_t *obj)
+{
+ int timeout;
+
+ // wait before reset
+ timeout = LONG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+
+ if (obj->i2c == I2C_1) {
+ __I2C1_FORCE_RESET();
+ __I2C1_RELEASE_RESET();
+ }
+ if (obj->i2c == I2C_2) {
+ __I2C2_FORCE_RESET();
+ __I2C2_RELEASE_RESET();
+ }
+#if defined I2C3_BASE
+ if (obj->i2c == I2C_3) {
+ __I2C3_FORCE_RESET();
+ __I2C3_RELEASE_RESET();
+ }
+#endif
+
+#if defined FMPI2C1_BASE
+ if (obj->i2c == FMPI2C_1) {
+ __HAL_RCC_FMPI2C1_FORCE_RESET();
+ __HAL_RCC_FMPI2C1_RELEASE_RESET();
+ }
+#endif
+}
+
+#if DEVICE_I2CSLAVE
+
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ uint16_t tmpreg = 0;
+
+ // Get the old register value
+ tmpreg = i2c->OAR1;
+ // Reset address bits
+ tmpreg &= 0xFC00;
+ // Set new address
+ tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
+ // Store the new register value
+ i2c->OAR1 = tmpreg;
+}
+
+void i2c_slave_mode(i2c_t *obj, int enable_slave)
+{
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ if (enable_slave) {
+ obj->slave = 1;
+ /* Enable Address Acknowledge */
+ I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
+ }
+}
+
+// See I2CSlave.h
+#define NoData 0 // the slave has not been addressed
+#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
+#define WriteGeneral 2 // the master is writing to all slave
+#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
+
+int i2c_slave_receive(i2c_t *obj)
+{
+ int retValue = NoData;
+
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
+ retValue = ReadAddressed;
+ else
+ retValue = WriteAddressed;
+
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
+ }
+ }
+
+ return (retValue);
+}
+
+int i2c_slave_read(i2c_t *obj, char *data, int length)
+{
+ uint32_t Timeout;
+ int size = 0;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ while (length > 0) {
+ /* Wait until RXNE flag is set */
+ // Wait until the byte is received
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ /* Read data from DR */
+ (*data++) = I2cHandle.Instance->DR;
+ length--;
+ size++;
+
+ if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
+ /* Read data from DR */
+ (*data++) = I2cHandle.Instance->DR;
+ length--;
+ size++;
+ }
+ }
+
+ /* Wait until STOP flag is set */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
+
+ /* Wait until BUSY flag is reset */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ return size;
+}
+
+int i2c_slave_write(i2c_t *obj, const char *data, int length)
+{
+ uint32_t Timeout;
+ int size = 0;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ while (length > 0) {
+ /* Wait until TXE flag is set */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+
+ /* Write data to DR */
+ I2cHandle.Instance->DR = (*data++);
+ length--;
+ size++;
+
+ if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
+ /* Write data to DR */
+ I2cHandle.Instance->DR = (*data++);
+ length--;
+ size++;
+ }
+ }
+
+ /* Wait until AF flag is set */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
+
+
+ /* Wait until BUSY flag is reset */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ I2cHandle.State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&I2cHandle);
+
+ return size;
+}
+
+
+#endif // DEVICE_I2CSLAVE
+
+#endif // DEVICE_I2C
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "cmsis.h"
+#include "us_ticker_api.h"
+
+// This function is called after RAM initialization and before main.
+void mbed_sdk_init()
+{
+ // Update the SystemCoreClock variable.
+ SystemCoreClockUpdate();
+ // Need to restart HAL driver after the RAM is initialized
+ HAL_Init();
+}
+
+/**
+ * @brief This function provides accurate delay (in milliseconds) based
+ * on variable incremented.
+ * @note This function is the modified version of the __weak version contained in
+ * stm32f4xx_hal.c, using us_ticker
+ * @param Delay: specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+void HAL_Delay(__IO uint32_t Delay)
+{
+ uint32_t start = us_ticker_read();
+ while ((us_ticker_read() - start) < (uint32_t)(Delay * 1000));
+}
+
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,182 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "pinmap.h"
+#include "PortNames.h"
+#include "mbed_error.h"
+
+// GPIO mode look-up table
+static const uint32_t gpio_mode[13] = {
+ 0x00000000, // 0 = GPIO_MODE_INPUT
+ 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
+ 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
+ 0x00000002, // 3 = GPIO_MODE_AF_PP
+ 0x00000012, // 4 = GPIO_MODE_AF_OD
+ 0x00000003, // 5 = GPIO_MODE_ANALOG
+ 0x10110000, // 6 = GPIO_MODE_IT_RISING
+ 0x10210000, // 7 = GPIO_MODE_IT_FALLING
+ 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
+ 0x10120000, // 9 = GPIO_MODE_EVT_RISING
+ 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
+ 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
+ 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
+};
+
+// Enable GPIO clock and return GPIO base address
+uint32_t Set_GPIO_Clock(uint32_t port_idx)
+{
+ uint32_t gpio_add = 0;
+ switch (port_idx) {
+ case PortA:
+ gpio_add = GPIOA_BASE;
+ __GPIOA_CLK_ENABLE();
+ break;
+ case PortB:
+ gpio_add = GPIOB_BASE;
+ __GPIOB_CLK_ENABLE();
+ break;
+ case PortC:
+ gpio_add = GPIOC_BASE;
+ __GPIOC_CLK_ENABLE();
+ break;
+#if defined GPIOD_BASE
+ case PortD:
+ gpio_add = GPIOD_BASE;
+ __GPIOD_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOE_BASE
+ case PortE:
+ gpio_add = GPIOE_BASE;
+ __GPIOE_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOF_BASE
+ case PortF:
+ gpio_add = GPIOF_BASE;
+ __GPIOF_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOG_BASE
+ case PortG:
+ gpio_add = GPIOG_BASE;
+ __GPIOG_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOH_BASE
+ case PortH:
+ gpio_add = GPIOH_BASE;
+ __GPIOH_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOI_BASE
+ case PortI:
+ gpio_add = GPIOI_BASE;
+ __GPIOI_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOJ_BASE
+ case PortJ:
+ gpio_add = GPIOJ_BASE;
+ __GPIOJ_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOK_BASE
+ case PortK:
+ gpio_add = GPIOK_BASE;
+ __GPIOK_CLK_ENABLE();
+ break;
+#endif
+ default:
+ error("Pinmap error: wrong port number.");
+ break;
+ }
+ return gpio_add;
+}
+
+/**
+ * Configure pin (mode, speed, output type and pull-up/pull-down)
+ */
+void pin_function(PinName pin, int data)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+ // Get the pin informations
+ uint32_t mode = STM_PIN_MODE(data);
+ uint32_t pupd = STM_PIN_PUPD(data);
+ uint32_t afnum = STM_PIN_AFNUM(data);
+
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Configure GPIO
+ GPIO_InitTypeDef GPIO_InitStructure;
+ GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
+ GPIO_InitStructure.Mode = gpio_mode[mode];
+ GPIO_InitStructure.Pull = pupd;
+ GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
+ GPIO_InitStructure.Alternate = afnum;
+ HAL_GPIO_Init(gpio, &GPIO_InitStructure);
+
+ // [TODO] Disconnect JTAG-DP + SW-DP signals.
+ // Warning: Need to reconnect under reset
+ //if ((pin == PA_13) || (pin == PA_14)) {
+ //
+ //}
+ //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
+ //
+ //}
+}
+
+/**
+ * Configure pin pull-up/pull-down
+ */
+void pin_mode(PinName pin, PinMode mode)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Configure pull-up/pull-down resistors
+ uint32_t pupd = (uint32_t)mode;
+ if (pupd > 2) {
+ pupd = 0; // Open-drain = No pull-up/No pull-down
+ }
+ gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
+ gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
+
+}
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "port_api.h"
+#include "pinmap.h"
+#include "gpio_api.h"
+#include "mbed_error.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
+// low nibble = pin number
+PinName port_pin(PortName port, int pin_n)
+{
+ return (PinName)(pin_n + (port << 4));
+}
+
+void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
+{
+ uint32_t port_index = (uint32_t)port;
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Fill PORT object structure for future use
+ obj->port = port;
+ obj->mask = mask;
+ obj->direction = dir;
+ obj->reg_in = &gpio->IDR;
+ obj->reg_out = &gpio->ODR;
+
+ port_dir(obj, dir);
+}
+
+void port_dir(port_t *obj, PinDirection dir)
+{
+ uint32_t i;
+ obj->direction = dir;
+ for (i = 0; i < 16; i++) { // Process all pins
+ if (obj->mask & (1 << i)) { // If the pin is used
+ if (dir == PIN_OUTPUT) {
+ pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+ } else { // PIN_INPUT
+ pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ }
+ }
+ }
+}
+
+void port_mode(port_t *obj, PinMode mode)
+{
+ uint32_t i;
+ for (i = 0; i < 16; i++) { // Process all pins
+ if (obj->mask & (1 << i)) { // If the pin is used
+ pin_mode(port_pin(obj->port, i), mode);
+ }
+ }
+}
+
+void port_write(port_t *obj, int value)
+{
+ *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
+}
+
+int port_read(port_t *obj)
+{
+ if (obj->direction == PIN_OUTPUT) {
+ return (*obj->reg_out & obj->mask);
+ } else { // PIN_INPUT
+ return (*obj->reg_in & obj->mask);
+ }
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,302 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "pwmout_api.h"
+
+#if DEVICE_PWMOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "PeripheralPins.h"
+
+static TIM_HandleTypeDef TimHandle;
+
+void pwmout_init(pwmout_t* obj, PinName pin)
+{
+ // Get the peripheral name from the pin and assign it to the object
+ obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
+ MBED_ASSERT(obj->pwm != (PWMName)NC);
+
+ // Get the functions (timer channel, (non)inverted) from the pin and assign it to the object
+ uint32_t function = pinmap_function(pin, PinMap_PWM);
+ MBED_ASSERT(function != (uint32_t)NC);
+ obj->channel = STM_PIN_CHANNEL(function);
+ obj->inverted = STM_PIN_INVERTED(function);
+
+ // Enable TIM clock
+#if defined(TIM1_BASE)
+ if (obj->pwm == PWM_1) __HAL_RCC_TIM1_CLK_ENABLE();
+#endif
+#if defined(TIM2_BASE)
+ if (obj->pwm == PWM_2) __HAL_RCC_TIM2_CLK_ENABLE();
+#endif
+#if defined(TIM3_BASE)
+ if (obj->pwm == PWM_3) __HAL_RCC_TIM3_CLK_ENABLE();
+#endif
+#if defined(TIM4_BASE)
+ if (obj->pwm == PWM_4) __HAL_RCC_TIM4_CLK_ENABLE();
+#endif
+#if defined(TIM5_BASE)
+ if (obj->pwm == PWM_5) __HAL_RCC_TIM5_CLK_ENABLE();
+#endif
+#if defined(TIM8_BASE)
+ if (obj->pwm == PWM_8) __HAL_RCC_TIM8_CLK_ENABLE();
+#endif
+#if defined(TIM9_BASE)
+ if (obj->pwm == PWM_9) __HAL_RCC_TIM9_CLK_ENABLE();
+#endif
+#if defined(TIM10_BASE)
+ if (obj->pwm == PWM_10) __HAL_RCC_TIM10_CLK_ENABLE();
+#endif
+#if defined(TIM11_BASE)
+ if (obj->pwm == PWM_11) __HAL_RCC_TIM11_CLK_ENABLE();
+#endif
+#if defined(TIM12_BASE)
+ if (obj->pwm == PWM_12) __HAL_RCC_TIM12_CLK_ENABLE();
+#endif
+#if defined(TIM13_BASE)
+ if (obj->pwm == PWM_13) __HAL_RCC_TIM13_CLK_ENABLE();
+#endif
+#if defined(TIM14_BASE)
+ if (obj->pwm == PWM_14) __HAL_RCC_TIM14_CLK_ENABLE();
+#endif
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_PWM);
+
+ obj->pin = pin;
+ obj->period = 0;
+ obj->pulse = 0;
+ obj->prescaler = 1;
+
+ pwmout_period_us(obj, 20000); // 20 ms per default
+}
+
+void pwmout_free(pwmout_t* obj)
+{
+ // Configure GPIO
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void pwmout_write(pwmout_t* obj, float value)
+{
+ TIM_OC_InitTypeDef sConfig;
+ int channel = 0;
+
+ TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+
+ if (value < (float)0.0) {
+ value = 0.0;
+ } else if (value > (float)1.0) {
+ value = 1.0;
+ }
+
+ obj->pulse = (uint32_t)((float)obj->period * value);
+
+ // Configure channels
+ sConfig.OCMode = TIM_OCMODE_PWM1;
+ sConfig.Pulse = obj->pulse / obj->prescaler;
+ sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
+ sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ sConfig.OCFastMode = TIM_OCFAST_DISABLE;
+ sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
+ sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+
+ switch (obj->channel) {
+ case 1:
+ channel = TIM_CHANNEL_1;
+ break;
+ case 2:
+ channel = TIM_CHANNEL_2;
+ break;
+ case 3:
+ channel = TIM_CHANNEL_3;
+ break;
+ case 4:
+ channel = TIM_CHANNEL_4;
+ break;
+ default:
+ return;
+ }
+
+ if (HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel) != HAL_OK) {
+ error("Cannot initialize PWM\n");
+ }
+
+ if (obj->inverted) {
+ HAL_TIMEx_PWMN_Start(&TimHandle, channel);
+ } else {
+ HAL_TIM_PWM_Start(&TimHandle, channel);
+ }
+}
+
+float pwmout_read(pwmout_t* obj)
+{
+ float value = 0;
+ if (obj->period > 0) {
+ value = (float)(obj->pulse) / (float)(obj->period);
+ }
+ return ((value > (float)1.0) ? (float)(1.0) : (value));
+}
+
+void pwmout_period(pwmout_t* obj, float seconds)
+{
+ pwmout_period_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_period_ms(pwmout_t* obj, int ms)
+{
+ pwmout_period_us(obj, ms * 1000);
+}
+
+void pwmout_period_us(pwmout_t* obj, int us)
+{
+ TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ uint32_t PclkFreq;
+ uint32_t APBxCLKDivider;
+ float dc = pwmout_read(obj);
+
+ __HAL_TIM_DISABLE(&TimHandle);
+
+ // Get clock configuration
+ // Note: PclkFreq contains here the Latency (not used after)
+ HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
+
+ // Get the PCLK and APBCLK divider related to the timer
+ switch (obj->pwm) {
+
+ // APB1 clock
+#if defined(TIM2_BASE)
+ case PWM_2:
+#endif
+#if defined(TIM3_BASE)
+ case PWM_3:
+#endif
+#if defined(TIM4_BASE)
+ case PWM_4:
+#endif
+#if defined(TIM5_BASE)
+ case PWM_5:
+#endif
+#if defined(TIM12_BASE)
+ case PWM_12:
+#endif
+#if defined(TIM13_BASE)
+ case PWM_13:
+#endif
+#if defined(TIM14_BASE)
+ case PWM_14:
+#endif
+ PclkFreq = HAL_RCC_GetPCLK1Freq();
+ APBxCLKDivider = RCC_ClkInitStruct.APB1CLKDivider;
+ break;
+
+ // APB2 clock
+#if defined(TIM1_BASE)
+ case PWM_1:
+#endif
+#if defined(TIM8_BASE)
+ case PWM_8:
+#endif
+#if defined(TIM9_BASE)
+ case PWM_9:
+#endif
+#if defined(TIM10_BASE)
+ case PWM_10:
+#endif
+#if defined(TIM11_BASE)
+ case PWM_11:
+#endif
+ PclkFreq = HAL_RCC_GetPCLK2Freq();
+ APBxCLKDivider = RCC_ClkInitStruct.APB2CLKDivider;
+ break;
+ default:
+ return;
+ }
+
+ /* To make it simple, we use to possible prescaler values which lead to:
+ * pwm unit = 1us, period/pulse can be from 1us to 65535us
+ * or
+ * pwm unit = 500us, period/pulse can be from 500us to ~32.76sec
+ * Be careful that all the channels of a PWM shares the same prescaler
+ */
+ if (us > 0xFFFF) {
+ obj->prescaler = 500;
+ } else {
+ obj->prescaler = 1;
+ }
+
+ // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
+ if (APBxCLKDivider == RCC_HCLK_DIV1)
+ TimHandle.Init.Prescaler = (uint16_t)(((PclkFreq) / 1000000) * obj->prescaler) - 1; // 1 us tick
+ else
+ TimHandle.Init.Prescaler = (uint16_t)(((PclkFreq * 2) / 1000000) * obj->prescaler) - 1; // 1 us tick
+
+ if (TimHandle.Init.Prescaler > 0xFFFF)
+ error("PWM: out of range prescaler");
+
+ TimHandle.Init.Period = (us - 1) / obj->prescaler;
+ if (TimHandle.Init.Period > 0xFFFF)
+ error("PWM: out of range period");
+
+ TimHandle.Init.ClockDivision = 0;
+ TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+
+ if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
+ error("Cannot initialize PWM\n");
+ }
+
+ // Save for future use
+ obj->period = us;
+
+ // Set duty cycle again
+ pwmout_write(obj, dc);
+
+ __HAL_TIM_ENABLE(&TimHandle);
+}
+
+void pwmout_pulsewidth(pwmout_t* obj, float seconds)
+{
+ pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
+{
+ pwmout_pulsewidth_us(obj, ms * 1000);
+}
+
+void pwmout_pulsewidth_us(pwmout_t* obj, int us)
+{
+ float value = (float)us / (float)obj->period;
+ pwmout_write(obj, value);
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,221 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "rtc_api.h"
+
+#if DEVICE_RTC
+
+#include "mbed_error.h"
+
+#if DEVICE_RTC_LSI
+static int rtc_inited = 0;
+#endif
+
+static RTC_HandleTypeDef RtcHandle;
+
+void rtc_init(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ uint32_t rtc_freq = 0;
+
+#if DEVICE_RTC_LSI
+ rtc_inited = 1;
+#endif
+
+ RtcHandle.Instance = RTC;
+
+#if !DEVICE_RTC_LSI
+ // Enable LSE Oscillator
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
+ RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
+ // Connect LSE to RTC
+ __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
+ rtc_freq = LSE_VALUE;
+ }
+ else {
+ error("RTC error: LSE clock initialization failed.");
+ }
+#else
+ // Enable Power clock
+ __PWR_CLK_ENABLE();
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Enable LSI clock
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ error("RTC error: LSI clock initialization failed.");
+ }
+ // Connect LSI to RTC
+ __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
+ // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
+ rtc_freq = LSI_VALUE;
+#endif
+
+ // Enable RTC
+ __HAL_RCC_RTC_ENABLE();
+
+ RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
+ RtcHandle.Init.AsynchPrediv = 127;
+ RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
+ RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
+ RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+ RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
+
+ if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
+ error("RTC error: RTC initialization failed.");
+ }
+}
+
+void rtc_free(void)
+{
+#if DEVICE_RTC_LSI
+ // Enable Power clock
+ __PWR_CLK_ENABLE();
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Disable access to Backup domain
+ HAL_PWR_DisableBkUpAccess();
+#endif
+
+ // Disable LSI and LSE clocks
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ HAL_RCC_OscConfig(&RCC_OscInitStruct);
+#if DEVICE_RTC_LSI
+ rtc_inited = 0;
+#endif
+}
+
+int rtc_isenabled(void)
+{
+#if DEVICE_RTC_LSI
+ return rtc_inited;
+#else
+ if ((RTC->ISR & RTC_ISR_INITS) == RTC_ISR_INITS) return 1;
+ else return 0;
+#endif
+}
+
+/*
+ RTC Registers
+ RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
+ RTC_Month 1=january, 2=february, ..., 12=december
+ RTC_Date day of the month 1-31
+ RTC_Year year 0-99
+ struct tm
+ tm_sec seconds after the minute 0-61
+ tm_min minutes after the hour 0-59
+ tm_hour hours since midnight 0-23
+ tm_mday day of the month 1-31
+ tm_mon months since January 0-11
+ tm_year years since 1900
+ tm_wday days since Sunday 0-6
+ tm_yday days since January 1 0-365
+ tm_isdst Daylight Saving Time flag
+*/
+time_t rtc_read(void)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+ struct tm timeinfo;
+
+ RtcHandle.Instance = RTC;
+
+ // Read actual date and time
+ // Warning: the time must be read first!
+ HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+ HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+
+ // Setup a tm structure based on the RTC
+ timeinfo.tm_wday = dateStruct.WeekDay;
+ timeinfo.tm_mon = dateStruct.Month - 1;
+ timeinfo.tm_mday = dateStruct.Date;
+ timeinfo.tm_year = dateStruct.Year + 68;
+ timeinfo.tm_hour = timeStruct.Hours;
+ timeinfo.tm_min = timeStruct.Minutes;
+ timeinfo.tm_sec = timeStruct.Seconds;
+ // Daylight Saving Time information is not available
+ timeinfo.tm_isdst = -1;
+
+ // Convert to timestamp
+ time_t t = mktime(&timeinfo);
+
+ return t;
+}
+
+void rtc_write(time_t t)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+
+ RtcHandle.Instance = RTC;
+
+ // Convert the time into a tm
+ struct tm *timeinfo = localtime(&t);
+
+ // Fill RTC structures
+ dateStruct.WeekDay = timeinfo->tm_wday;
+ dateStruct.Month = timeinfo->tm_mon + 1;
+ dateStruct.Date = timeinfo->tm_mday;
+ dateStruct.Year = timeinfo->tm_year - 68;
+ timeStruct.Hours = timeinfo->tm_hour;
+ timeStruct.Minutes = timeinfo->tm_min;
+ timeStruct.Seconds = timeinfo->tm_sec;
+ timeStruct.TimeFormat = RTC_HOURFORMAT_24;
+ timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
+ timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
+
+ // Change the RTC current date/time
+ HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+ HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,1031 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "mbed_assert.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include <string.h>
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+
+#define UART_NUM (8)
+static uint32_t serial_irq_ids[UART_NUM] = {0};
+static UART_HandleTypeDef uart_handlers[UART_NUM];
+
+static uart_irq_handler irq_handler;
+
+int stdio_uart_inited = 0;
+serial_t stdio_uart;
+
+#if DEVICE_SERIAL_ASYNCH
+ #define SERIAL_S(obj) (&((obj)->serial))
+#else
+ #define SERIAL_S(obj) (obj)
+#endif
+
+
+static void init_uart(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+ huart->Instance = (USART_TypeDef *)(obj_s->uart);
+
+ huart->Init.BaudRate = obj_s->baudrate;
+ huart->Init.WordLength = obj_s->databits;
+ huart->Init.StopBits = obj_s->stopbits;
+ huart->Init.Parity = obj_s->parity;
+#if DEVICE_SERIAL_FC
+ huart->Init.HwFlowCtl = obj_s->hw_flow_ctl;
+#else
+ huart->Init.HwFlowCtl = UART_HWCONTROL_NONE;
+#endif
+ huart->Init.OverSampling = UART_OVERSAMPLING_16;
+ huart->TxXferCount = 0;
+ huart->TxXferSize = 0;
+ huart->RxXferCount = 0;
+ huart->RxXferSize = 0;
+
+ if (obj_s->pin_rx == NC) {
+ huart->Init.Mode = UART_MODE_TX;
+ } else if (obj_s->pin_tx == NC) {
+ huart->Init.Mode = UART_MODE_RX;
+ } else {
+ huart->Init.Mode = UART_MODE_TX_RX;
+ }
+
+ /* uAMR & ARM: Call to UART init is done between reset of pre-initialized variables */
+ /* and before HAL Init. SystemCoreClock init required here */
+ SystemCoreClockUpdate();
+
+ if (HAL_UART_Init(huart) != HAL_OK) {
+ error("Cannot initialize UART\n");
+ }
+}
+
+void serial_init(serial_t *obj, PinName tx, PinName rx)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ // Determine the UART to use (UART_1, UART_2, ...)
+ UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+ UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+
+ // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
+ obj_s->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
+ MBED_ASSERT(obj_s->uart != (UARTName)NC);
+
+ // Enable USART clock
+ switch (obj_s->uart) {
+ case UART_1:
+ __HAL_RCC_USART1_FORCE_RESET();
+ __HAL_RCC_USART1_RELEASE_RESET();
+ __HAL_RCC_USART1_CLK_ENABLE();
+ obj_s->index = 0;
+ break;
+
+ case UART_2:
+ __HAL_RCC_USART2_FORCE_RESET();
+ __HAL_RCC_USART2_RELEASE_RESET();
+ __HAL_RCC_USART2_CLK_ENABLE();
+ obj_s->index = 1;
+ break;
+#if defined(USART3_BASE)
+ case UART_3:
+ __HAL_RCC_USART3_FORCE_RESET();
+ __HAL_RCC_USART3_RELEASE_RESET();
+ __HAL_RCC_USART3_CLK_ENABLE();
+ obj_s->index = 2;
+ break;
+#endif
+#if defined(UART4_BASE)
+ case UART_4:
+ __HAL_RCC_UART4_FORCE_RESET();
+ __HAL_RCC_UART4_RELEASE_RESET();
+ __HAL_RCC_UART4_CLK_ENABLE();
+ obj_s->index = 3;
+ break;
+#endif
+#if defined(UART5_BASE)
+ case UART_5:
+ __HAL_RCC_UART5_FORCE_RESET();
+ __HAL_RCC_UART5_RELEASE_RESET();
+ __HAL_RCC_UART5_CLK_ENABLE();
+ obj_s->index = 4;
+ break;
+#endif
+#if defined(USART6_BASE)
+ case UART_6:
+ __HAL_RCC_USART6_FORCE_RESET();
+ __HAL_RCC_USART6_RELEASE_RESET();
+ __HAL_RCC_USART6_CLK_ENABLE();
+ obj_s->index = 5;
+ break;
+#endif
+#if defined(UART7_BASE)
+ case UART_7:
+ __HAL_RCC_UART7_FORCE_RESET();
+ __HAL_RCC_UART7_RELEASE_RESET();
+ __HAL_RCC_UART7_CLK_ENABLE();
+ obj_s->index = 6;
+ break;
+#endif
+#if defined(UART8_BASE)
+ case UART_8:
+ __HAL_RCC_UART8_FORCE_RESET();
+ __HAL_RCC_UART8_RELEASE_RESET();
+ __HAL_RCC_UART8_CLK_ENABLE();
+ obj_s->index = 7;
+ break;
+#endif
+ }
+
+ // Configure the UART pins
+ pinmap_pinout(tx, PinMap_UART_TX);
+ pinmap_pinout(rx, PinMap_UART_RX);
+
+ if (tx != NC) {
+ pin_mode(tx, PullUp);
+ }
+ if (rx != NC) {
+ pin_mode(rx, PullUp);
+ }
+
+ // Configure UART
+ obj_s->baudrate = 9600;
+ obj_s->databits = UART_WORDLENGTH_8B;
+ obj_s->stopbits = UART_STOPBITS_1;
+ obj_s->parity = UART_PARITY_NONE;
+
+#if DEVICE_SERIAL_FC
+ obj_s->hw_flow_ctl = UART_HWCONTROL_NONE;
+#endif
+
+ obj_s->pin_tx = tx;
+ obj_s->pin_rx = rx;
+
+ init_uart(obj);
+
+ // For stdio management
+ if (obj_s->uart == STDIO_UART) {
+ stdio_uart_inited = 1;
+ memcpy(&stdio_uart, obj, sizeof(serial_t));
+ }
+}
+
+void serial_free(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ // Reset UART and disable clock
+ switch (obj_s->index) {
+ case 0:
+ __USART1_FORCE_RESET();
+ __USART1_RELEASE_RESET();
+ __USART1_CLK_DISABLE();
+ break;
+ case 1:
+ __USART2_FORCE_RESET();
+ __USART2_RELEASE_RESET();
+ __USART2_CLK_DISABLE();
+ break;
+#if defined(USART3_BASE)
+ case 2:
+ __USART3_FORCE_RESET();
+ __USART3_RELEASE_RESET();
+ __USART3_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART4_BASE)
+ case 3:
+ __UART4_FORCE_RESET();
+ __UART4_RELEASE_RESET();
+ __UART4_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART5_BASE)
+ case 4:
+ __UART5_FORCE_RESET();
+ __UART5_RELEASE_RESET();
+ __UART5_CLK_DISABLE();
+ break;
+#endif
+#if defined(USART6_BASE)
+ case 5:
+ __USART6_FORCE_RESET();
+ __USART6_RELEASE_RESET();
+ __USART6_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART7_BASE)
+ case 6:
+ __UART7_FORCE_RESET();
+ __UART7_RELEASE_RESET();
+ __UART7_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART8_BASE)
+ case 7:
+ __UART8_FORCE_RESET();
+ __UART8_RELEASE_RESET();
+ __UART8_CLK_DISABLE();
+ break;
+#endif
+ }
+
+ // Configure GPIOs
+ pin_function(obj_s->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj_s->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+
+ serial_irq_ids[obj_s->index] = 0;
+}
+
+void serial_baud(serial_t *obj, int baudrate)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ obj_s->baudrate = baudrate;
+ init_uart(obj);
+}
+
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ if (data_bits == 9) {
+ obj_s->databits = UART_WORDLENGTH_9B;
+ } else {
+ obj_s->databits = UART_WORDLENGTH_8B;
+ }
+
+ switch (parity) {
+ case ParityOdd:
+ obj_s->parity = UART_PARITY_ODD;
+ break;
+ case ParityEven:
+ obj_s->parity = UART_PARITY_EVEN;
+ break;
+ default: // ParityNone
+ case ParityForced0: // unsupported!
+ case ParityForced1: // unsupported!
+ obj_s->parity = UART_PARITY_NONE;
+ break;
+ }
+
+ if (stop_bits == 2) {
+ obj_s->stopbits = UART_STOPBITS_2;
+ } else {
+ obj_s->stopbits = UART_STOPBITS_1;
+ }
+
+ init_uart(obj);
+}
+
+/******************************************************************************
+ * INTERRUPTS HANDLING
+ ******************************************************************************/
+
+static void uart_irq(int id)
+{
+ UART_HandleTypeDef * huart = &uart_handlers[id];
+
+ if (serial_irq_ids[id] != 0) {
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_TC) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC) != RESET) {
+ irq_handler(serial_irq_ids[id], TxIrq);
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
+ }
+ }
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE) != RESET) {
+ irq_handler(serial_irq_ids[id], RxIrq);
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_RXNE);
+ }
+ }
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear ORE flag
+ }
+ }
+ }
+}
+
+static void uart1_irq(void)
+{
+ uart_irq(0);
+}
+
+static void uart2_irq(void)
+{
+ uart_irq(1);
+}
+
+#if defined(USART3_BASE)
+static void uart3_irq(void)
+{
+ uart_irq(2);
+}
+#endif
+
+#if defined(UART4_BASE)
+static void uart4_irq(void)
+{
+ uart_irq(3);
+}
+#endif
+
+#if defined(UART5_BASE)
+static void uart5_irq(void)
+{
+ uart_irq(4);
+}
+#endif
+
+#if defined(USART6_BASE)
+static void uart6_irq(void)
+{
+ uart_irq(5);
+}
+#endif
+
+#if defined(UART7_BASE)
+static void uart7_irq(void)
+{
+ uart_irq(6);
+}
+#endif
+
+#if defined(UART8_BASE)
+static void uart8_irq(void)
+{
+ uart_irq(7);
+}
+#endif
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ irq_handler = handler;
+ serial_irq_ids[obj_s->index] = id;
+}
+
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+
+ switch (obj_s->index) {
+ case 0:
+ irq_n = USART1_IRQn;
+ vector = (uint32_t)&uart1_irq;
+ break;
+
+ case 1:
+ irq_n = USART2_IRQn;
+ vector = (uint32_t)&uart2_irq;
+ break;
+#if defined(USART3_BASE)
+ case 2:
+ irq_n = USART3_IRQn;
+ vector = (uint32_t)&uart3_irq;
+ break;
+#endif
+#if defined(UART4_BASE)
+ case 3:
+ irq_n = UART4_IRQn;
+ vector = (uint32_t)&uart4_irq;
+ break;
+#endif
+#if defined(UART5_BASE)
+ case 4:
+ irq_n = UART5_IRQn;
+ vector = (uint32_t)&uart5_irq;
+ break;
+#endif
+#if defined(USART6_BASE)
+ case 5:
+ irq_n = USART6_IRQn;
+ vector = (uint32_t)&uart6_irq;
+ break;
+#endif
+#if defined(UART7_BASE)
+ case 6:
+ irq_n = UART7_IRQn;
+ vector = (uint32_t)&uart7_irq;
+ break;
+#endif
+#if defined(UART8_BASE)
+ case 7:
+ irq_n = UART8_IRQn;
+ vector = (uint32_t)&uart8_irq;
+ break;
+#endif
+ }
+
+ if (enable) {
+ if (irq == RxIrq) {
+ __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
+ } else { // TxIrq
+ __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
+ }
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+
+ } else { // disable
+ int all_disabled = 0;
+ if (irq == RxIrq) {
+ __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+ // Check if TxIrq is disabled too
+ if ((huart->Instance->CR1 & USART_CR1_TXEIE) == 0) {
+ all_disabled = 1;
+ }
+ } else { // TxIrq
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
+ // Check if RxIrq is disabled too
+ if ((huart->Instance->CR1 & USART_CR1_RXNEIE) == 0) {
+ all_disabled = 1;
+ }
+ }
+
+ if (all_disabled) {
+ NVIC_DisableIRQ(irq_n);
+ }
+ }
+}
+
+/******************************************************************************
+ * READ/WRITE
+ ******************************************************************************/
+
+int serial_getc(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ while (!serial_readable(obj));
+ return (int)(huart->Instance->DR & 0x1FF);
+}
+
+void serial_putc(serial_t *obj, int c)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ while (!serial_writable(obj));
+ huart->Instance->DR = (uint32_t)(c & 0x1FF);
+}
+
+int serial_readable(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ // Check if data is received
+ return (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE) != RESET) ? 1 : 0;
+}
+
+int serial_writable(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ // Check if data is transmitted
+ return (__HAL_UART_GET_FLAG(huart, UART_FLAG_TXE) != RESET) ? 1 : 0;
+}
+
+void serial_clear(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ huart->TxXferCount = 0;
+ huart->RxXferCount = 0;
+}
+
+void serial_pinout_tx(PinName tx)
+{
+ pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+void serial_break_set(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ HAL_LIN_SendBreak(huart);
+}
+
+void serial_break_clear(serial_t *obj)
+{
+ (void)obj;
+}
+
+#if DEVICE_SERIAL_ASYNCH
+
+/******************************************************************************
+ * LOCAL HELPER FUNCTIONS
+ ******************************************************************************/
+
+/**
+ * Configure the TX buffer for an asynchronous write serial transaction
+ *
+ * @param obj The serial object.
+ * @param tx The buffer for sending.
+ * @param tx_length The number of words to transmit.
+ */
+static void serial_tx_buffer_set(serial_t *obj, void *tx, int tx_length, uint8_t width)
+{
+ (void)width;
+
+ // Exit if a transmit is already on-going
+ if (serial_tx_active(obj)) {
+ return;
+ }
+
+ obj->tx_buff.buffer = tx;
+ obj->tx_buff.length = tx_length;
+ obj->tx_buff.pos = 0;
+}
+
+/**
+ * Configure the RX buffer for an asynchronous write serial transaction
+ *
+ * @param obj The serial object.
+ * @param tx The buffer for sending.
+ * @param tx_length The number of words to transmit.
+ */
+static void serial_rx_buffer_set(serial_t *obj, void *rx, int rx_length, uint8_t width)
+{
+ (void)width;
+
+ // Exit if a reception is already on-going
+ if (serial_rx_active(obj)) {
+ return;
+ }
+
+ obj->rx_buff.buffer = rx;
+ obj->rx_buff.length = rx_length;
+ obj->rx_buff.pos = 0;
+}
+
+/**
+ * Configure events
+ *
+ * @param obj The serial object
+ * @param event The logical OR of the events to configure
+ * @param enable Set to non-zero to enable events, or zero to disable them
+ */
+static void serial_enable_event(serial_t *obj, int event, uint8_t enable)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ // Shouldn't have to enable interrupt here, just need to keep track of the requested events.
+ if (enable) {
+ obj_s->events |= event;
+ } else {
+ obj_s->events &= ~event;
+ }
+}
+
+
+/**
+* Get index of serial object TX IRQ, relating it to the physical peripheral.
+*
+* @param obj pointer to serial object
+* @return internal NVIC TX IRQ index of U(S)ART peripheral
+*/
+static IRQn_Type serial_get_irq_n(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ IRQn_Type irq_n;
+
+ switch (obj_s->index) {
+#if defined(USART1_BASE)
+ case 0:
+ irq_n = USART1_IRQn;
+ break;
+#endif
+#if defined(USART2_BASE)
+ case 1:
+ irq_n = USART2_IRQn;
+ break;
+#endif
+#if defined(USART3_BASE)
+ case 2:
+ irq_n = USART3_IRQn;
+ break;
+#endif
+#if defined(UART4_BASE)
+ case 3:
+ irq_n = UART4_IRQn;
+ break;
+#endif
+#if defined(USART5_BASE)
+ case 4:
+ irq_n = UART5_IRQn;
+ break;
+#endif
+#if defined(USART6_BASE)
+ case 5:
+ irq_n = USART6_IRQn;
+ break;
+#endif
+#if defined(UART7_BASE)
+ case 6:
+ irq_n = UART7_IRQn;
+ break;
+#endif
+#if defined(UART8_BASE)
+ case 7:
+ irq_n = UART8_IRQn;
+ break;
+#endif
+ default:
+ irq_n = (IRQn_Type)0;
+ }
+
+ return irq_n;
+}
+
+/******************************************************************************
+ * MBED API FUNCTIONS
+ ******************************************************************************/
+
+/**
+ * Begin asynchronous TX transfer. The used buffer is specified in the serial
+ * object, tx_buff
+ *
+ * @param obj The serial object
+ * @param tx The buffer for sending
+ * @param tx_length The number of words to transmit
+ * @param tx_width The bit width of buffer word
+ * @param handler The serial handler
+ * @param event The logical OR of events to be registered
+ * @param hint A suggestion for how to use DMA with this transfer
+ * @return Returns number of data transfered, or 0 otherwise
+ */
+int serial_tx_asynch(serial_t *obj, const void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint)
+{
+ // TODO: DMA usage is currently ignored
+ (void) hint;
+
+ // Check buffer is ok
+ MBED_ASSERT(tx != (void*)0);
+ MBED_ASSERT(tx_width == 8); // support only 8b width
+
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef * huart = &uart_handlers[obj_s->index];
+
+ if (tx_length == 0) {
+ return 0;
+ }
+
+ // Set up buffer
+ serial_tx_buffer_set(obj, (void *)tx, tx_length, tx_width);
+
+ // Set up events
+ serial_enable_event(obj, SERIAL_EVENT_TX_ALL, 0); // Clear all events
+ serial_enable_event(obj, event, 1); // Set only the wanted events
+
+ // Enable interrupt
+ IRQn_Type irq_n = serial_get_irq_n(obj);
+ NVIC_ClearPendingIRQ(irq_n);
+ NVIC_DisableIRQ(irq_n);
+ NVIC_SetPriority(irq_n, 1);
+ NVIC_SetVector(irq_n, (uint32_t)handler);
+ NVIC_EnableIRQ(irq_n);
+
+ // the following function will enable UART_IT_TXE and error interrupts
+ if (HAL_UART_Transmit_IT(huart, (uint8_t*)tx, tx_length) != HAL_OK) {
+ return 0;
+ }
+
+ return tx_length;
+}
+
+/**
+ * Begin asynchronous RX transfer (enable interrupt for data collecting)
+ * The used buffer is specified in the serial object, rx_buff
+ *
+ * @param obj The serial object
+ * @param rx The buffer for sending
+ * @param rx_length The number of words to transmit
+ * @param rx_width The bit width of buffer word
+ * @param handler The serial handler
+ * @param event The logical OR of events to be registered
+ * @param handler The serial handler
+ * @param char_match A character in range 0-254 to be matched
+ * @param hint A suggestion for how to use DMA with this transfer
+ */
+void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint)
+{
+ // TODO: DMA usage is currently ignored
+ (void) hint;
+
+ /* Sanity check arguments */
+ MBED_ASSERT(obj);
+ MBED_ASSERT(rx != (void*)0);
+ MBED_ASSERT(rx_width == 8); // support only 8b width
+
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ serial_enable_event(obj, SERIAL_EVENT_RX_ALL, 0);
+ serial_enable_event(obj, event, 1);
+
+ // set CharMatch
+ obj->char_match = char_match;
+
+ serial_rx_buffer_set(obj, rx, rx_length, rx_width);
+
+ IRQn_Type irq_n = serial_get_irq_n(obj);
+ NVIC_ClearPendingIRQ(irq_n);
+ NVIC_DisableIRQ(irq_n);
+ NVIC_SetPriority(irq_n, 0);
+ NVIC_SetVector(irq_n, (uint32_t)handler);
+ NVIC_EnableIRQ(irq_n);
+
+ // following HAL function will enable the RXNE interrupt + error interrupts
+ HAL_UART_Receive_IT(huart, (uint8_t*)rx, rx_length);
+}
+
+/**
+ * Attempts to determine if the serial peripheral is already in use for TX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the TX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_tx_active(serial_t *obj)
+{
+ MBED_ASSERT(obj);
+
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ return ((HAL_UART_GetState(huart) == HAL_UART_STATE_BUSY_TX) ? 1 : 0);
+}
+
+/**
+ * Attempts to determine if the serial peripheral is already in use for RX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the RX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_rx_active(serial_t *obj)
+{
+ MBED_ASSERT(obj);
+
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ return ((HAL_UART_GetState(huart) == HAL_UART_STATE_BUSY_RX) ? 1 : 0);
+}
+
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) {
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_TC) != RESET) {
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
+ }
+}
+
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) {
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_PE) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear PE flag
+ } else if (__HAL_UART_GET_FLAG(huart, UART_FLAG_FE) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear FE flag
+ } else if (__HAL_UART_GET_FLAG(huart, UART_FLAG_NE) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear NE flag
+ } else if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear ORE flag
+ }
+}
+
+/**
+ * The asynchronous TX and RX handler.
+ *
+ * @param obj The serial object
+ * @return Returns event flags if a TX/RX transfer termination condition was met or 0 otherwise
+ */
+int serial_irq_handler_asynch(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ volatile int return_event = 0;
+ uint8_t *buf = (uint8_t*)(obj->rx_buff.buffer);
+ uint8_t i = 0;
+
+ // TX PART:
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_TC) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC) != RESET) {
+ // Return event SERIAL_EVENT_TX_COMPLETE if requested
+ if ((obj_s->events & SERIAL_EVENT_TX_COMPLETE ) != 0) {
+ return_event |= (SERIAL_EVENT_TX_COMPLETE & obj_s->events);
+ }
+ }
+ }
+
+ // Handle error events
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_PE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
+ return_event |= (SERIAL_EVENT_RX_PARITY_ERROR & obj_s->events);
+ }
+ }
+
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_FE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
+ return_event |= (SERIAL_EVENT_RX_FRAMING_ERROR & obj_s->events);
+ }
+ }
+
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
+ if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
+ return_event |= (SERIAL_EVENT_RX_OVERRUN_ERROR & obj_s->events);
+ }
+ }
+
+ HAL_UART_IRQHandler(huart);
+
+ // Abort if an error occurs
+ if (return_event & SERIAL_EVENT_RX_PARITY_ERROR ||
+ return_event & SERIAL_EVENT_RX_FRAMING_ERROR ||
+ return_event & SERIAL_EVENT_RX_OVERRUN_ERROR) {
+ return return_event;
+ }
+
+ //RX PART
+ if (huart->RxXferSize != 0) {
+ obj->rx_buff.pos = huart->RxXferSize - huart->RxXferCount;
+ }
+ if ((huart->RxXferCount == 0) && (obj->rx_buff.pos >= (obj->rx_buff.length - 1))) {
+ return_event |= (SERIAL_EVENT_RX_COMPLETE & obj_s->events);
+ }
+
+ // Check if char_match is present
+ if (obj_s->events & SERIAL_EVENT_RX_CHARACTER_MATCH) {
+ if (buf != NULL) {
+ for (i = 0; i < obj->rx_buff.pos; i++) {
+ if (buf[i] == obj->char_match) {
+ obj->rx_buff.pos = i;
+ return_event |= (SERIAL_EVENT_RX_CHARACTER_MATCH & obj_s->events);
+ serial_rx_abort_asynch(obj);
+ break;
+ }
+ }
+ }
+ }
+
+ return return_event;
+}
+
+/**
+ * Abort the ongoing TX transaction. It disables the enabled interupt for TX and
+ * flush TX hardware buffer if TX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_tx_abort_asynch(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+
+ // clear flags
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
+
+ // reset states
+ huart->TxXferCount = 0;
+ // update handle state
+ if(huart->gState == HAL_UART_STATE_BUSY_TX_RX) {
+ huart->gState = HAL_UART_STATE_BUSY_RX;
+ } else {
+ huart->gState = HAL_UART_STATE_READY;
+ }
+}
+
+/**
+ * Abort the ongoing RX transaction It disables the enabled interrupt for RX and
+ * flush RX hardware buffer if RX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_rx_abort_asynch(serial_t *obj)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+ UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
+
+ // disable interrupts
+ __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+ __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+ // clear flags
+ __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_RXNE);
+ volatile uint32_t tmpval = huart->Instance->DR; // Clear errors flag
+
+ // reset states
+ huart->RxXferCount = 0;
+ // update handle state
+ if(huart->RxState == HAL_UART_STATE_BUSY_TX_RX) {
+ huart->RxState = HAL_UART_STATE_BUSY_TX;
+ } else {
+ huart->RxState = HAL_UART_STATE_READY;
+ }
+}
+
+#endif
+
+#if DEVICE_SERIAL_FC
+
+/**
+ * Set HW Control Flow
+ * @param obj The serial object
+ * @param type The Control Flow type (FlowControlNone, FlowControlRTS, FlowControlCTS, FlowControlRTSCTS)
+ * @param rxflow Pin for the rxflow
+ * @param txflow Pin for the txflow
+ */
+void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow)
+{
+ struct serial_s *obj_s = SERIAL_S(obj);
+
+ // Determine the UART to use (UART_1, UART_2, ...)
+ UARTName uart_rts = (UARTName)pinmap_peripheral(rxflow, PinMap_UART_RTS);
+ UARTName uart_cts = (UARTName)pinmap_peripheral(txflow, PinMap_UART_CTS);
+
+ // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
+ obj_s->uart = (UARTName)pinmap_merge(uart_cts, uart_rts);
+ MBED_ASSERT(obj_s->uart != (UARTName)NC);
+
+ if(type == FlowControlNone) {
+ // Disable hardware flow control
+ obj_s->hw_flow_ctl = UART_HWCONTROL_NONE;
+ }
+ if (type == FlowControlRTS) {
+ // Enable RTS
+ MBED_ASSERT(uart_rts != (UARTName)NC);
+ obj_s->hw_flow_ctl = UART_HWCONTROL_RTS;
+ obj_s->pin_rts = rxflow;
+ // Enable the pin for RTS function
+ pinmap_pinout(rxflow, PinMap_UART_RTS);
+ }
+ if (type == FlowControlCTS) {
+ // Enable CTS
+ MBED_ASSERT(uart_cts != (UARTName)NC);
+ obj_s->hw_flow_ctl = UART_HWCONTROL_CTS;
+ obj_s->pin_cts = txflow;
+ // Enable the pin for CTS function
+ pinmap_pinout(txflow, PinMap_UART_CTS);
+ }
+ if (type == FlowControlRTSCTS) {
+ // Enable CTS & RTS
+ MBED_ASSERT(uart_rts != (UARTName)NC);
+ MBED_ASSERT(uart_cts != (UARTName)NC);
+ obj_s->hw_flow_ctl = UART_HWCONTROL_RTS_CTS;
+ obj_s->pin_rts = rxflow;
+ obj_s->pin_cts = txflow;
+ // Enable the pin for CTS function
+ pinmap_pinout(txflow, PinMap_UART_CTS);
+ // Enable the pin for RTS function
+ pinmap_pinout(rxflow, PinMap_UART_RTS);
+ }
+
+ init_uart(obj);
+}
+
+#endif
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "sleep_api.h"
+#if DEVICE_SLEEP
+
+#include "cmsis.h"
+
+
+void sleep(void) {
+ // Stop HAL systick
+ HAL_SuspendTick();
+ // Request to enter SLEEP mode
+ HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+ // Restart HAL systick
+ HAL_ResumeTick();
+}
+
+void deepsleep(void)
+{
+ // Request to enter STOP mode with regulator in low power mode
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+
+ // After wake-up from STOP reconfigure the PLL
+ SetSysClock();
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,356 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "mbed_error.h"
+#include "spi_api.h"
+
+#if DEVICE_SPI
+
+#include <math.h>
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+
+static SPI_HandleTypeDef SpiHandle;
+
+static void init_spi(spi_t *obj)
+{
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+
+ __HAL_SPI_DISABLE(&SpiHandle);
+
+ SpiHandle.Init.Mode = obj->mode;
+ SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
+ SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
+ SpiHandle.Init.CLKPhase = obj->cpha;
+ SpiHandle.Init.CLKPolarity = obj->cpol;
+ SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
+ SpiHandle.Init.CRCPolynomial = 7;
+ SpiHandle.Init.DataSize = obj->bits;
+ SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ SpiHandle.Init.NSS = obj->nss;
+ SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
+
+ if (HAL_SPI_Init(&SpiHandle) != HAL_OK) {
+ error("Cannot initialize SPI");
+ }
+
+ __HAL_SPI_ENABLE(&SpiHandle);
+}
+
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
+{
+ // Determine the SPI to use
+ SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+ SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
+ SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+ SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+
+ SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
+ SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
+
+ obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
+ MBED_ASSERT(obj->spi != (SPIName)NC);
+
+ // Enable SPI clock
+ if (obj->spi == SPI_1) {
+ __HAL_RCC_SPI1_CLK_ENABLE();
+ }
+
+ if (obj->spi == SPI_2) {
+ __HAL_RCC_SPI2_CLK_ENABLE();
+ }
+
+#if defined SPI3_BASE
+ if (obj->spi == SPI_3) {
+ __HAL_RCC_SPI3_CLK_ENABLE();
+ }
+#endif
+
+#if defined SPI4_BASE
+ if (obj->spi == SPI_4) {
+ __HAL_RCC_SPI4_CLK_ENABLE();
+ }
+#endif
+
+#if defined SPI5_BASE
+ if (obj->spi == SPI_5) {
+ __HAL_RCC_SPI5_CLK_ENABLE();
+ }
+#endif
+
+#if defined SPI6_BASE
+ if (obj->spi == SPI_6) {
+ __HAL_RCC_SPI6_CLK_ENABLE();
+ }
+#endif
+
+ // Configure the SPI pins
+ pinmap_pinout(mosi, PinMap_SPI_MOSI);
+ pinmap_pinout(miso, PinMap_SPI_MISO);
+ pinmap_pinout(sclk, PinMap_SPI_SCLK);
+
+ // Save new values
+ obj->bits = SPI_DATASIZE_8BIT;
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_1EDGE;
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256;
+
+ obj->pin_miso = miso;
+ obj->pin_mosi = mosi;
+ obj->pin_sclk = sclk;
+ obj->pin_ssel = ssel;
+
+ if (ssel != NC) {
+ pinmap_pinout(ssel, PinMap_SPI_SSEL);
+ } else {
+ obj->nss = SPI_NSS_SOFT;
+ }
+
+ init_spi(obj);
+}
+
+void spi_free(spi_t *obj)
+{
+ // Reset SPI and disable clock
+ if (obj->spi == SPI_1) {
+ __HAL_RCC_SPI1_FORCE_RESET();
+ __HAL_RCC_SPI1_RELEASE_RESET();
+ __HAL_RCC_SPI1_CLK_DISABLE();
+ }
+
+ if (obj->spi == SPI_2) {
+ __HAL_RCC_SPI2_FORCE_RESET();
+ __HAL_RCC_SPI2_RELEASE_RESET();
+ __HAL_RCC_SPI2_CLK_DISABLE();
+ }
+#if defined SPI3_BASE
+ if (obj->spi == SPI_3) {
+ __HAL_RCC_SPI3_FORCE_RESET();
+ __HAL_RCC_SPI3_RELEASE_RESET();
+ __HAL_RCC_SPI3_CLK_DISABLE();
+ }
+#endif
+
+#if defined SPI4_BASE
+ if (obj->spi == SPI_4) {
+ __HAL_RCC_SPI4_FORCE_RESET();
+ __HAL_RCC_SPI4_RELEASE_RESET();
+ __HAL_RCC_SPI4_CLK_DISABLE();
+ }
+#endif
+
+#if defined SPI5_BASE
+ if (obj->spi == SPI_5) {
+ __HAL_RCC_SPI5_FORCE_RESET();
+ __HAL_RCC_SPI5_RELEASE_RESET();
+ __HAL_RCC_SPI5_CLK_DISABLE();
+ }
+#endif
+
+#if defined SPI6_BASE
+ if (obj->spi == SPI_6) {
+ __HAL_RCC_SPI6_FORCE_RESET();
+ __HAL_RCC_SPI6_RELEASE_RESET();
+ __HAL_RCC_SPI6_CLK_DISABLE();
+ }
+#endif
+
+ // Configure GPIOs
+ pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void spi_format(spi_t *obj, int bits, int mode, int slave)
+{
+ // Save new values
+ if (bits == 16) {
+ obj->bits = SPI_DATASIZE_16BIT;
+ } else {
+ obj->bits = SPI_DATASIZE_8BIT;
+ }
+
+ switch (mode) {
+ case 0:
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_1EDGE;
+ break;
+ case 1:
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_2EDGE;
+ break;
+ case 2:
+ obj->cpol = SPI_POLARITY_HIGH;
+ obj->cpha = SPI_PHASE_1EDGE;
+ break;
+ default:
+ obj->cpol = SPI_POLARITY_HIGH;
+ obj->cpha = SPI_PHASE_2EDGE;
+ break;
+ }
+
+ if (obj->nss != SPI_NSS_SOFT) {
+ obj->nss = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
+ }
+
+ obj->mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
+
+ init_spi(obj);
+}
+
+static const uint16_t baudrate_prescaler_table[] = {SPI_BAUDRATEPRESCALER_2,
+ SPI_BAUDRATEPRESCALER_4,
+ SPI_BAUDRATEPRESCALER_8,
+ SPI_BAUDRATEPRESCALER_16,
+ SPI_BAUDRATEPRESCALER_32,
+ SPI_BAUDRATEPRESCALER_64,
+ SPI_BAUDRATEPRESCALER_128,
+ SPI_BAUDRATEPRESCALER_256};
+
+void spi_frequency(spi_t *obj, int hz)
+{
+ int spi_hz = 0;
+ uint8_t prescaler_rank = 0;
+
+ /* Get source clock depending on SPI instance */
+ switch ((int)obj->spi) {
+ case SPI_1:
+#if defined SPI4_BASE
+ case SPI_4:
+#endif
+#if defined SPI5_BASE
+ case SPI_5:
+#endif
+#if defined SPI6_BASE
+ case SPI_6:
+#endif
+ /* SPI_1, SPI_4, SPI_5 and SPI_6. Source CLK is PCKL2 */
+ spi_hz = HAL_RCC_GetPCLK2Freq();
+ break;
+ case SPI_2:
+#if defined SPI3_BASE
+ case SPI_3:
+#endif
+ /* SPI_2 and SPI_3. Source CLK is PCKL1 */
+ spi_hz = HAL_RCC_GetPCLK1Freq();
+ break;
+ default:
+ error("SPI instance not set");
+ }
+
+ /* Define pre-scaler in order to get highest available frequency below requested frequency */
+ while ((spi_hz > hz) && (prescaler_rank < sizeof(baudrate_prescaler_table)/sizeof(baudrate_prescaler_table[0]))){
+ spi_hz = spi_hz / 2;
+ prescaler_rank++;
+ }
+
+ if (prescaler_rank <= sizeof(baudrate_prescaler_table)/sizeof(baudrate_prescaler_table[0])) {
+ obj->br_presc = baudrate_prescaler_table[prescaler_rank-1];
+ } else {
+ error("Couldn't setup requested SPI frequency");
+ }
+
+ init_spi(obj);
+}
+
+static inline int ssp_readable(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ // Check if data is received
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
+ return status;
+}
+
+static inline int ssp_writeable(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ // Check if data is transmitted
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
+ return status;
+}
+
+static inline void ssp_write(spi_t *obj, int value)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_writeable(obj));
+ spi->DR = (uint16_t)value;
+}
+
+static inline int ssp_read(spi_t *obj)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_readable(obj));
+ return (int)spi->DR;
+}
+
+static inline int ssp_busy(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
+ return status;
+}
+
+int spi_master_write(spi_t *obj, int value)
+{
+ ssp_write(obj, value);
+ return ssp_read(obj);
+}
+
+int spi_slave_receive(spi_t *obj)
+{
+ return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
+};
+
+int spi_slave_read(spi_t *obj)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_readable(obj));
+ return (int)spi->DR;
+}
+
+void spi_slave_write(spi_t *obj, int value)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_writeable(obj));
+ spi->DR = (uint16_t)value;
+}
+
+int spi_busy(spi_t *obj)
+{
+ return ssp_busy(obj);
+}
+
+#endif
diff -r 000000000000 -r c76361bd82e8 src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/usb_cdc/mbed-dev/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <stddef.h>
+#include "us_ticker_api.h"
+#include "PeripheralNames.h"
+
+#ifdef TARGET_STM32F469
+#define TIM_MST TIM2
+#else
+#define TIM_MST TIM5
+#endif
+
+static TIM_HandleTypeDef TimMasterHandle;
+static int us_ticker_inited = 0;
+
+void us_ticker_init(void)
+{
+ if (us_ticker_inited) return;
+ us_ticker_inited = 1;
+
+ TimMasterHandle.Instance = TIM_MST;
+
+ HAL_InitTick(0); // The passed value is not used
+}
+
+uint32_t us_ticker_read()
+{
+ if (!us_ticker_inited) us_ticker_init();
+ return TIM_MST->CNT;
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp)
+{
+ // Set new output compare value
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
+ // Enable IT
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_disable_interrupt(void)
+{
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_clear_interrupt(void)
+{
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+}